summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu')
-rw-r--r--arch/arm/cpu/armv7/ls102xa/Kconfig10
-rw-r--r--arch/arm/cpu/armv8/Kconfig4
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/cpu.c2
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon10
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/soc.c54
-rw-r--r--arch/arm/cpu/armv8/fsl-layerscape/spl.c8
6 files changed, 26 insertions, 62 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 635358e328..5d6a711c14 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -1,5 +1,7 @@
config ARCH_LS1021A
bool
+ select SYS_FSL_DDR_BE if SYS_FSL_DDR
+ select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_ERRATUM_A008378
select SYS_FSL_ERRATUM_A008407
select SYS_FSL_ERRATUM_A008997
@@ -10,18 +12,16 @@ config ARCH_LS1021A
select SYS_FSL_ERRATUM_A009942
select SYS_FSL_ERRATUM_A010315
select SYS_FSL_HAS_CCI400
- select SYS_FSL_SRDS_1
- select SYS_HAS_SERDES
- select SYS_FSL_DDR_BE if SYS_FSL_DDR
- select SYS_FSL_DDR_VER_50 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR3 if SYS_FSL_DDR
select SYS_FSL_HAS_DDR4 if SYS_FSL_DDR
select SYS_FSL_HAS_SEC
select SYS_FSL_SEC_COMPAT_5
select SYS_FSL_SEC_LE
+ select SYS_FSL_SRDS_1
+ select SYS_HAS_SERDES
+ imply CMD_PCI
imply SCSI
imply SCSI_AHCI
- imply CMD_PCI
menu "LS102xA architecture"
depends on ARCH_LS1021A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 22d2f29548..741e15c773 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -44,8 +44,8 @@ config ARMV8_SPIN_TABLE
menu "ARMv8 secure monitor firmware"
config ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support"
- select OF_LIBFDT
select FIT
+ select OF_LIBFDT
help
This framework is aimed at making secure monitor firmware load
process brief.
@@ -60,8 +60,8 @@ config ARMV8_SEC_FIRMWARE_SUPPORT
config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
bool "Enable ARMv8 secure monitor firmware framework support for SPL"
- select SPL_OF_LIBFDT
select SPL_FIT
+ select SPL_OF_LIBFDT
help
Say Y here to support this framework in SPL phase.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index 40c2c3a1cf..052e0708d4 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -9,6 +9,7 @@
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/system.h>
+#include <fm_eth.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch/fsl_serdes.h>
@@ -18,7 +19,6 @@
#include <fsl_immap.h>
#include <asm/arch/mp.h>
#include <efi_loader.h>
-#include <fm_eth.h>
#include <fsl-mc/fsl_mc.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
index a00b5bc9c3..7dae9f03c3 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
+++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon
@@ -129,6 +129,16 @@ Example:
The "loadables" is not optional. It tells SPL which images to load into memory.
+Falcon mode with QSPI boot
+--------------------------
+To use falcon mode with QSPI boot, SPL needs to be enabled. Similar to SD or
+NAND boot, a RAM version full feature U-Boot is needed. Unlike SD or NAND boot,
+SPL with QSPI doesn't need to combine SPL image with RAM version image. Two
+separated images are used, u-boot-spl.pbl and u-boot.img. The former is SPL
+image with RCW and PBI commands to load the SPL payload into On-Chip RAM. The
+latter is RAM version U-Boot in FIT format (or legacy format if FIT is not
+used).
+
Other things to consider
-----------------------
Falcon boot skips a lot of initialization in U-Boot. If Linux expects the
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bfd663942a..8028d5228f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,8 +6,6 @@
#include <common.h>
#include <fsl_immap.h>
#include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/io.h>
@@ -330,36 +328,6 @@ void fsl_lsch3_early_init_f(void)
#endif
}
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
- ccsr_ahci = (void *)CONFIG_SYS_SATA2;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
- ccsr_ahci = (void *)CONFIG_SYS_SATA1;
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA1);
- scsi_scan(false);
-#endif
-
- return 0;
-}
-#endif
-
/* Get VDD in the unit mV from voltage ID */
int get_core_volt_from_fuse(void)
{
@@ -400,25 +368,6 @@ int get_core_volt_from_fuse(void)
}
#elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
- struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
- /* Disable SATA ECC */
- out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
- out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
- out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
- out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
- out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
- out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
- ahci_init((void __iomem *)CONFIG_SYS_SATA);
- scsi_scan(false);
-
- return 0;
-}
-#endif
static void erratum_a009929(void)
{
@@ -719,9 +668,6 @@ int qspi_ahb_init(void)
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
-#ifdef CONFIG_SCSI_AHCI_PLAT
- sata_init();
-#endif
#ifdef CONFIG_CHAIN_OF_TRUST
fsl_setenv_chain_of_trust();
#endif
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index dba4b40607..3e53084b21 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -11,6 +11,7 @@
#include <fsl_csu.h>
#include <asm/arch/fdt.h>
#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -22,6 +23,9 @@ u32 spl_boot_device(void)
#ifdef CONFIG_SPL_NAND_SUPPORT
return BOOT_DEVICE_NAND;
#endif
+#ifdef CONFIG_QSPI_BOOT
+ return BOOT_DEVICE_NOR;
+#endif
return 0;
}
@@ -52,6 +56,7 @@ void spl_board_init(void)
void board_init_f(ulong dummy)
{
+ icache_enable();
/* Clear global data */
memset((void *)gd, 0, sizeof(gd_t));
board_early_init_f();
@@ -101,6 +106,9 @@ void board_init_f(ulong dummy)
gd->arch.tlb_addr = (gd->ram_top - gd->arch.tlb_size) & ~(0x10000 - 1);
gd->arch.tlb_allocated = gd->arch.tlb_addr;
#endif /* CONFIG_SPL_FSL_LS_PPA */
+#if defined(CONFIG_QSPI_AHB_INIT) && defined(CONFIG_QSPI_BOOT)
+ qspi_ahb_init();
+#endif
}
#ifdef CONFIG_SPL_OS_BOOT
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-07 22:58:32 +0000