summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h')
-rw-r--r--arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h742
1 files changed, 0 insertions, 742 deletions
diff --git a/arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h b/arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h
deleted file mode 100644
index dabc38e25e..0000000000
--- a/arch/arm/cpu/ixp/npe/include/IxFeatureCtrl.h
+++ /dev/null
@@ -1,742 +0,0 @@
-/**
- * @file IxFeatureCtrl.h
- *
- * @date 30-Jan-2003
-
- * @brief This file contains the public API of the IXP400 Feature Control
- * component.
- *
- *
- * @par
- * IXP400 SW Release version 2.0
- *
- * -- Copyright Notice --
- *
- * @par
- * Copyright 2001-2005, Intel Corporation.
- * All rights reserved.
- *
- * @par
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the Intel Corporation nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * @par
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * @par
- * -- End of Copyright Notice --
-*/
-/* ------------------------------------------------------
- Doxygen group definitions
- ------------------------------------------------------ */
-/**
- * @defgroup IxFeatureCtrlAPI IXP400 Feature Control (IxFeatureCtrl) API
- *
- * @brief The Public API for the IXP400 Feature Control.
- *
- * @{
- */
-
-#ifndef IXFEATURECTRL_H
-#define IXFEATURECTRL_H
-
-/*
- * User defined include files
- */
-#include "IxOsal.h"
-
-/*
- * #defines and macros
- */
-
-/*************************************************************
- * The following are IxFeatureCtrlComponentCheck return values.
- ************************************************************/
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_COMPONENT_DISABLED
- *
- * @brief Hardware Component is disabled/unavailable.
- * Return status by ixFeatureCtrlComponentCheck()
- */
-#define IX_FEATURE_CTRL_COMPONENT_DISABLED 0
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_COMPONENT_ENABLED
- *
- * @brief Hardware Component is available.
- * Return status by ixFeatureCtrlComponentCheck()
- */
-#define IX_FEATURE_CTRL_COMPONENT_ENABLED 1
-
-/***********************************************************************************
- * Product ID in XScale CP15 - Register 0
- * - It contains information on the maximum XScale Core Frequency and
- * Silicon Stepping.
- * - XScale Core Frequency Id indicates only the maximum XScale frequency
- * achievable and not the running XScale frequency (maybe stepped down).
- * - The register is read by using ixFeatureCtrlProductIdRead.
- * - Usage example:
- * productId = ixFeatureCtrlProductIdRead();
- * if( (productId & IX_FEATURE_CTRL_SILICON_STEPPING_MASK) ==
- * IX_FEATURE_CTRL_SILICON_TYPE_A0 )
- * if( (productId & IX_FEATURE_CTRL_XSCALE_FREQ_MASK) ==
- * IX_FEATURE_CTRL_XSCALE_FREQ_533 )
- *
- * 31 28 27 24 23 20 19 16 15 12 11 9 8 4 3 0
- * --------------------------------------------------------------------------------
- * | 0x6 | 0x9 | 0x0 | 0x5 | 0x4 | Device ID | XScale Core Freq Id | Si Stepping Id |
- * --------------------------------------------------------------------------------
- *
- * Maximum Achievable XScale Core Frequency Id : 533MHz - 0x1C
- * 400MHz - 0x1D
- * 266MHz - 0x1F
- *
- * <b>THE CORE FREQUENCY ID IS NOT APPLICABLE TO IXP46X <\b>
- *
- * The above is applicable to IXP42X only. CP15 in IXP46X does not contain any
- * Frequency ID.
- *
- * Si Stepping Id : A - 0x0
- * B - 0x1
- *
- * XScale Core freq Id - Device ID [11:9] : IXP42X - 0x0
- * IXP46X - 0x1
- *************************************************************************************/
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_SILICON_TYPE_A0
- *
- * @brief This is the value of A0 Silicon in product ID.
- */
-#define IX_FEATURE_CTRL_SILICON_TYPE_A0 0
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_SILICON_TYPE_B0
- *
- * @brief This is the value of B0 Silicon in product ID.
- */
-#define IX_FEATURE_CTRL_SILICON_TYPE_B0 1
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_SILICON_STEPPING_MASK
- *
- * @brief This is the mask of silicon stepping in product ID.
- */
-#define IX_FEATURE_CTRL_SILICON_STEPPING_MASK 0xF
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_DEVICE_TYPE_MASK
- *
- * @brief This is the mask of silicon stepping in product ID.
- */
-#define IX_FEATURE_CTRL_DEVICE_TYPE_MASK (0x7)
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET
- *
- * @brief This is the mask of silicon stepping in product ID.
- */
-#define IX_FEATURE_CTRL_DEVICE_TYPE_OFFSET 9
-
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_533
- *
- * @brief This is the value of 533MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_533 ((0x1C)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_400
- *
- * @brief This is the value of 400MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_400 ((0x1D)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_266
- *
- * @brief This is the value of 266MHz XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_266 ((0x1F)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURE_CTRL_XSCALE_FREQ_MASK
- *
- * @brief This is the mask of XScale Core in product ID.
- */
-#define IX_FEATURE_CTRL_XSCALE_FREQ_MASK ((0xFF)<<4)
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_32PHY
- *
- * @brief Maximum UTOPIA PHY available is 32.
- *
- */
-#define IX_FEATURECTRL_REG_UTOPIA_32PHY 0x0
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_16PHY
- *
- * @brief Maximum UTOPIA PHY available is 16.
- *
- */
-#define IX_FEATURECTRL_REG_UTOPIA_16PHY 0x1
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_8PHY
- *
- * @brief Maximum UTOPIA PHY available to is 8.
- *
- */
-#define IX_FEATURECTRL_REG_UTOPIA_8PHY 0x2
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_UTOPIA_4PHY
- *
- * @brief Maximum UTOPIA PHY available to is 4.
- *
- */
-#define IX_FEATURECTRL_REG_UTOPIA_4PHY 0x3
-
-#ifdef __ixp46X
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_533FREQ
- *
- * @brief Maximum frequency available to IXP46x is 533 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_533FREQ 0x0
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_667FREQ
- *
- * @brief Maximum frequency available to IXP46x is 667 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_667FREQ 0x1
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_400FREQ
- *
- * @brief Maximum frequency available to IXP46x is 400 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_400FREQ 0x2
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_REG_XSCALE_266FREQ
- *
- * @brief Maximum frequency available to IXP46x is 266 MHz.
- *
- */
-#define IX_FEATURECTRL_REG_XSCALE_266FREQ 0x3
-
-#endif /* __ixp46X */
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE
- *
- * @brief Component selected is not available for device
- *
- */
-#define IX_FEATURECTRL_COMPONENT_NOT_AVAILABLE 0x0000
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @def IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE
- *
- * @brief Component selected is not available for device
- *
- */
-#define IX_FEATURECTRL_COMPONENT_ALWAYS_AVAILABLE 0xffff
-
-/**
- * @defgroup IxFeatureCtrlSwConfig Software Configuration for Access Component
- *
- * @ingroup IxFeatureCtrlAPI
- *
- * @brief This section describes software configuration in access component. The
- * configuration can be changed at run-time. ixFeatureCtrlSwConfigurationCheck( )
- * will be used across applicable access component to check the configuration.
- * ixFeatureCtrlSwConfigurationWrite( ) is used to write the software configuration.
- *
- * @note <b>All software configurations are default to be enabled.</b>
- *
- * @{
- */
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @def IX_FEATURE_CTRL_SWCONFIG_DISABLED
- *
- * @brief Software configuration is disabled.
- *
- */
-#define IX_FEATURE_CTRL_SWCONFIG_DISABLED 0
-
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @def IX_FEATURE_CTRL_SWCONFIG_ENABLED
- *
- * @brief Software configuration is enabled.
- *
- */
-#define IX_FEATURE_CTRL_SWCONFIG_ENABLED 1
-
-/**
- * Section for enums
- **/
-
-/**
- * @ingroup IxFeatureCtrlBuildDevice
- *
- * @enum IxFeatureCtrlBuildDevice
- *
- * @brief Indicates software build type.
- *
- * Default build type is IXP42X
- *
- */
-typedef enum
-{
- IX_FEATURE_CTRL_SW_BUILD_IXP42X = 0, /**<Build type is IXP42X */
- IX_FEATURE_CTRL_SW_BUILD_IXP46X /**<Build type is IXP46X */
-} IxFeatureCtrlBuildDevice;
-
-/**
- * @ingroup IxFeatureCtrlSwConfig
- *
- * @enum IxFeatureCtrlSwConfig
- *
- * @brief Enumeration for software configuration in access components.
- *
- * Entry for new run-time software configuration should be added here.
- */
-typedef enum
-{
- IX_FEATURECTRL_ETH_LEARNING = 0, /**< EthDB Learning Feature */
- IX_FEATURECTRL_ORIGB0_DISPATCHER, /**< IXP42X B0 and IXP46X dispatcher without
- livelock prevention functionality Feature */
- IX_FEATURECTRL_SWCONFIG_MAX /**< Maximum boudary for IxFeatureCtrlSwConfig */
-} IxFeatureCtrlSwConfig;
-
-
-/************************************************************************
- * IXP400 Feature Control Register
- * - It contains the information (available/unavailable) of IXP425&IXP46X
- * hardware components in their corresponding bit location.
- * - Bit value of 0 means the hardware component is available
- * or not software disabled. Hardware component that is available
- * can be software disabled.
- * - Bit value of 1 means the hardware is unavailable or software
- * disabled.Hardware component that is unavailable cannot be software
- * enabled.
- * - Use ixFeatureCtrlHwCapabilityRead() to read the hardware component's
- * availability.
- * - Use ixFeatureCtrlRead() to get the current IXP425/IXP46X feature control
- * register value.
- *
- * Bit Field Description (Hardware Component Availability)
- * --- ---------------------------------------------------
- * 0 RComp Circuitry
- * 1 USB Controller
- * 2 Hashing Coprocessor
- * 3 AES Coprocessor
- * 4 DES Coprocessor
- * 5 HDLC Coprocessor
- * 6 AAL Coprocessor - Always available in IXP46X
- * 7 HSS Coprocesspr
- * 8 Utopia Coprocessor
- * 9 Ethernet 0 Coprocessor
- * 10 Ethernet 1 Coprocessor
- * 11 NPE A
- * 12 NPE B
- * 13 NPE C
- * 14 PCI Controller
- * 15 ECC/TimeSync Coprocessor - Only applicable to IXP46X
- * 16-17 Utopia PHY Limit Status : 0x0 - 32 PHY
- * 0x1 - 16 PHY
- * 0x2 - 8 PHY
- * 0x3 - 4 PHY
- *
- * Portions below are only applicable to IXP46X
- * 18 USB Host Coprocessor
- * 19 NPE A Ethernet - 0 for Enable if Utopia = 1
- * 20 NPE B Ethernet coprocessor 1-3.
- * 21 RSA Crypto Block coprocessor.
- * 22-23 Processor frequency : 0x0 - 533 MHz
- * 0x1 - 667 MHz
- * 0x2 - 400 MHz
- * 0x3 - 266 MHz
- * 24-31 Reserved
- *
- ************************************************************************/
-/*Section generic to both IXP42X and IXP46X*/
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @enum IxFeatureCtrlComponentType
- *
- * @brief Enumeration for components availavble
- *
- */
-typedef enum
-{
- IX_FEATURECTRL_RCOMP = 0, /**<bit location for RComp Circuitry*/
- IX_FEATURECTRL_USB, /**<bit location for USB Controller*/
- IX_FEATURECTRL_HASH, /**<bit location for Hashing Coprocessor*/
- IX_FEATURECTRL_AES, /**<bit location for AES Coprocessor*/
- IX_FEATURECTRL_DES, /**<bit location for DES Coprocessor*/
- IX_FEATURECTRL_HDLC, /**<bit location for HDLC Coprocessor*/
- IX_FEATURECTRL_AAL, /**<bit location for AAL Coprocessor*/
- IX_FEATURECTRL_HSS, /**<bit location for HSS Coprocessor*/
- IX_FEATURECTRL_UTOPIA, /**<bit location for UTOPIA Coprocessor*/
- IX_FEATURECTRL_ETH0, /**<bit location for Ethernet 0 Coprocessor*/
- IX_FEATURECTRL_ETH1, /**<bit location for Ethernet 1 Coprocessor*/
- IX_FEATURECTRL_NPEA, /**<bit location for NPE A*/
- IX_FEATURECTRL_NPEB, /**<bit location for NPE B*/
- IX_FEATURECTRL_NPEC, /**<bit location for NPE C*/
- IX_FEATURECTRL_PCI, /**<bit location for PCI Controller*/
- IX_FEATURECTRL_ECC_TIMESYNC, /**<bit location for TimeSync Coprocessor*/
- IX_FEATURECTRL_UTOPIA_PHY_LIMIT, /**<bit location for Utopia PHY Limit Status*/
- IX_FEATURECTRL_UTOPIA_PHY_LIMIT_BIT2, /**<2nd bit of PHY limit status*/
- IX_FEATURECTRL_USB_HOST_CONTROLLER, /**<bit location for USB host controller*/
- IX_FEATURECTRL_NPEA_ETH, /**<bit location for NPE-A Ethernet Disable*/
- IX_FEATURECTRL_NPEB_ETH, /**<bit location for NPE-B Ethernet 1-3 Coprocessors Disable*/
- IX_FEATURECTRL_RSA, /**<bit location for RSA Crypto block Coprocessors Disable*/
- IX_FEATURECTRL_XSCALE_MAX_FREQ, /**<bit location for XScale max frequency*/
- IX_FEATURECTRL_XSCALE_MAX_FREQ_BIT2, /**<2nd xscale max freq bit NOT TO BE USED */
- IX_FEATURECTRL_MAX_COMPONENTS
-} IxFeatureCtrlComponentType;
-
-/**
- * @ingroup IxFeatureCtrlDeviceId
- *
- * @enum IxFeatureCtrlDeviceId
- *
- * @brief Enumeration for device type.
- *
- * @warning This enum is closely related to the npe image. Its format should comply
- * with formats used in the npe image ImageID. This is indicated by the
- * first nibble of the image ID. This should also be in sync with the
- * with what is defined in CP15. Current available formats are
- * - IXP42X - 0000
- * - IXP46X - 0001
- *
- */
-typedef enum
-{
- IX_FEATURE_CTRL_DEVICE_TYPE_IXP42X = 0, /**<Device type is IXP42X */
- IX_FEATURE_CTRL_DEVICE_TYPE_IXP46X, /**<Device type is IXP46X */
- IX_FEATURE_CTRL_DEVICE_TYPE_MAX /**<Max devices */
-} IxFeatureCtrlDeviceId;
-
-
-/**
- * @} addtogroup IxFeatureCtrlSwConfig
- */
-
-/*
- * Typedefs
- */
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @typedef IxFeatureCtrlReg
- *
- * @brief Feature Control Register that contains hardware components'
- * availability information.
- */
-typedef UINT32 IxFeatureCtrlReg;
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @typedef IxFeatureCtrlProductId
- *
- * @brief Product ID of Silicon that contains Silicon Stepping and
- * Maximum XScale Core Frequency information.
- */
-typedef UINT32 IxFeatureCtrlProductId;
-
-/*
- * Prototypes for interface functions
- */
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureCtrlReg ixFeatureCtrlRead (void)
- *
- * @brief This function reads out the CURRENT value of Feature Control Register.
- * The current value may not be the same as that of the hardware component
- * availability.
- *
- * The bit location of each hardware component is defined above.
- * A value of '1' in bit means the hardware component is not available. A value of '0'
- * means the hardware component is available.
- *
- * @return
- * - IxFeatureCtrlReg - the current value of IXP400 Feature Control Register
- */
-PUBLIC IxFeatureCtrlReg
-ixFeatureCtrlRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureDeviceId ixFeatureCtrlDeviceRead (void)
- *
- * @brief This function gets the type of device that the software is currently running
- * on
- *
- * This function reads the feature Ctrl register specifically to obtain the device id.
- * The definitions of the avilable IDs are as above.
- *
- * @return
- * - IxFeatureCtrlDeviceId - the type of device currently running
- */
-IxFeatureCtrlDeviceId
-ixFeatureCtrlDeviceRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureCtrlBuildDevice ixFeatureCtrlSoftwareBuildGet (void)
- *
- * @brief This function refers to the value set by the compiler flag to determine
- * the type of device the software is built for.
- *
- * The function reads the compiler flag to determine the device the software is
- * built for. When the user executes build in the command line,
- * a compile time flag (__ixp42X/__ixp46X is set. This API reads this
- * flag and returns the software build type to the calling client.
- *
- * @return
- * - IxFeatureCtrlBuildDevice - the type of device software is built for.
- */
-IxFeatureCtrlBuildDevice
-ixFeatureCtrlSoftwareBuildGet (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureCtrlReg ixFeatureCtrlHwCapabilityRead (void)
- *
- * @brief This function reads out the hardware capability of a silicon type as defined in
- * feature control register.This value is different from that returned by
- * ixFeatureCtrlRead() because this function returns the actual hardware component
- * availability.
- *
- * The bit location of each hardware component is defined above.
- * A value of '1' in bit means the hardware component is not available. A value of '0'
- * means the hardware component is available.
- *
- * @return
- * - IxFeatureCtrlReg - the hardware capability of IXP400.
- *
- * @warning
- * - This function must not be called when IXP400 is running as the result
- * is undefined.
- */
-PUBLIC IxFeatureCtrlReg
-ixFeatureCtrlHwCapabilityRead (void);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn void ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg)
- *
- * @brief This function write the value stored in IxFeatureCtrlReg expUnitReg
- * to the Feature Control Register.
- *
- * The bit location of each hardware component is defined above.
- * The write is only effective on available hardware components. Writing '1' in a
- * bit will software disable the respective hardware component. A '0' will mean that
- * the hardware component will remain to be operable.
- *
- * @param expUnitReg @ref IxFeatureCtrlReg [in] - The value to be written to feature control
- * register.
- *
- * @return none
- *
- */
-PUBLIC void
-ixFeatureCtrlWrite (IxFeatureCtrlReg expUnitReg);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IX_STATUS ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType)
- *
- * @brief This function will check the availability of hardware component specified
- * as componentType value.
- *
- * Usage Example:<br>
- * - if(IX_FEATURE_CTRL_COMPONENT_DISABLED !=
- * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_ETH0)) <br>
- * - if(IX_FEATURE_CTRL_COMPONENT_ENABLED ==
- * ixFeatureCtrlComponentCheck(IX_FEATURECTRL_PCI)) <br>
- *
- * This function is typically called during component initialization time.
- *
- * @param componentType @ref IxFeatureCtrlComponentType [in] - the type of a component as
- * defined above as IX_FEATURECTRL_XXX (Exp: IX_FEATURECTRL_PCI, IX_FEATURECTRL_ETH0)
-
- *
- * @return
- * - IX_FEATURE_CTRL_COMPONENT_ENABLED if component is available
- * - IX_FEATURE_CTRL_COMPONENT_DISABLED if component is unavailable
- */
-PUBLIC IX_STATUS
-ixFeatureCtrlComponentCheck (IxFeatureCtrlComponentType componentType);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IxFeatureCtrlProductId ixFeatureCtrlProductIdRead (void)
- *
- * @brief This function will return IXP400 product ID i.e. CP15,
- * Register 0.
- *
- * @return
- * - IxFeatureCtrlProductId - the value of product ID.
- *
- */
-PUBLIC IxFeatureCtrlProductId
-ixFeatureCtrlProductIdRead (void) ;
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn IX_STATUS ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType)
- *
- * @brief This function checks whether the specified software configuration is
- * enabled or disabled.
- *
- * Usage Example:<br>
- * - if(IX_FEATURE_CTRL_SWCONFIG_DISABLED !=
- * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br>
- * - if(IX_FEATURE_CTRL_SWCONFIG_ENABLED ==
- * ixFeatureCtrlSwConfigurationCheck(IX_FEATURECTRL_ETH_LEARNING)) <br>
- *
- * This function is typically called during access component initialization time.
- *
- * @param swConfigType @ref IxFeatureCtrlSwConfig [in] - the type of a software configuration
- * defined in IxFeatureCtrlSwConfig enumeration.
- *
- * @return
- * - IX_FEATURE_CTRL_SWCONFIG_ENABLED if software configuration is enabled.
- * - IX_FEATURE_CTRL_SWCONFIG_DISABLED if software configuration is disabled.
- */
-PUBLIC IX_STATUS
-ixFeatureCtrlSwConfigurationCheck (IxFeatureCtrlSwConfig swConfigType);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn void ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled)
- *
- * @brief This function enable/disable the specified software configuration.
- *
- * Usage Example:<br>
- * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, TRUE) is used
- * to enable Ethernet Learning Feature <br>
- * - ixFeatureCtrlSwConfigurationWrite(IX_FEATURECTRL_ETH_LEARNING, FALSE) is used
- * to disable Ethernet Learning Feature <br>
- *
- * @param swConfigType IxFeatureCtrlSwConfig [in] - the type of a software configuration
- * defined in IxFeatureCtrlSwConfig enumeration.
- * @param enabled BOOL [in] - To enable(TRUE) / disable (FALSE) the specified software
- * configuration.
- *
- * @return none
- *
- */
-PUBLIC void
-ixFeatureCtrlSwConfigurationWrite (IxFeatureCtrlSwConfig swConfigType, BOOL enabled);
-
-/**
- * @ingroup IxFeatureCtrlAPI
- *
- * @fn void ixFeatureCtrlIxp400SwVersionShow (void)
- *
- * @brief This function shows the current software release information for IXP400
- *
- * @return none
- *
- */
-PUBLIC void
-ixFeatureCtrlIxp400SwVersionShow (void);
-
-#endif /* IXFEATURECTRL_H */
-
-/**
- * @} defgroup IxFeatureCtrlAPI
- */