diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-layerscape/Kconfig')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 113 |
1 files changed, 103 insertions, 10 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index cdeef26fe5d..3518d8601d1 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -16,8 +16,12 @@ config ARCH_LS1043A select SYS_FSL_DDR_BE select SYS_FSL_DDR_VER_50 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009660 select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009929 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_ERRATUM_A010315 @@ -39,6 +43,10 @@ config ARCH_LS1046A select SYS_FSL_ERRATUM_A008336 select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 + select SYS_FSL_ERRATUM_A009008 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -50,6 +58,32 @@ config ARCH_LS1046A select BOARD_EARLY_INIT_F imply SCSI +config ARCH_LS1088A + bool + select ARMV8_SET_SMPEN + select FSL_LSCH3 + select SYS_FSL_DDR + select SYS_FSL_DDR_LE + select SYS_FSL_DDR_VER_50 + select SYS_FSL_EC1 + select SYS_FSL_EC2 + select SYS_FSL_ERRATUM_A009803 + select SYS_FSL_ERRATUM_A009942 + select SYS_FSL_ERRATUM_A010165 + select SYS_FSL_ERRATUM_A008511 + select SYS_FSL_ERRATUM_A008850 + select SYS_FSL_HAS_CCI400 + select SYS_FSL_HAS_DDR4 + select SYS_FSL_HAS_RGMII + select SYS_FSL_HAS_SEC + select SYS_FSL_SEC_COMPAT_5 + select SYS_FSL_SEC_LE + select SYS_FSL_SRDS_1 + select SYS_FSL_SRDS_2 + select FSL_TZASC_1 + select ARCH_EARLY_INIT_R + select BOARD_EARLY_INIT_F + config ARCH_LS2080A bool select ARMV8_SET_SMPEN @@ -61,6 +95,7 @@ config ARCH_LS2080A select SYS_FSL_DDR select SYS_FSL_DDR_LE select SYS_FSL_DDR_VER_50 + select SYS_FSL_HAS_CCN504 select SYS_FSL_HAS_DP_DDR select SYS_FSL_HAS_SEC select SYS_FSL_HAS_DDR4 @@ -73,8 +108,12 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A008511 select SYS_FSL_ERRATUM_A008514 select SYS_FSL_ERRATUM_A008585 + select SYS_FSL_ERRATUM_A008997 + select SYS_FSL_ERRATUM_A009007 + select SYS_FSL_ERRATUM_A009008 select SYS_FSL_ERRATUM_A009635 select SYS_FSL_ERRATUM_A009663 + select SYS_FSL_ERRATUM_A009798 select SYS_FSL_ERRATUM_A009801 select SYS_FSL_ERRATUM_A009803 select SYS_FSL_ERRATUM_A009942 @@ -85,6 +124,7 @@ config ARCH_LS2080A config FSL_LSCH2 bool + select SYS_FSL_HAS_CCI400 select SYS_FSL_HAS_SEC select SYS_FSL_SEC_COMPAT_5 select SYS_FSL_SEC_BE @@ -98,7 +138,7 @@ config FSL_LSCH3 config FSL_MC_ENET bool "Management Complex network" - depends on ARCH_LS2080A + depends on ARCH_LS2080A || ARCH_LS1088A default y select RESV_RAM help @@ -114,6 +154,7 @@ config FSL_PCIE_COMPAT default "fsl,ls1043a-pcie" if ARCH_LS1043A default "fsl,ls1046a-pcie" if ARCH_LS1046A default "fsl,ls2080a-pcie" if ARCH_LS2080A + default "fsl,ls1088a-pcie" if ARCH_LS1088A help This compatible is used to find pci controller node in Kernel DT to complete fixup. @@ -182,6 +223,7 @@ config SYS_LS_PPA_FW_ADDR default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A default 0x60400000 if SYS_LS_PPA_FW_IN_XIP default 0x400000 if SYS_LS_PPA_FW_IN_MMC default 0x400000 if SYS_LS_PPA_FW_IN_NAND @@ -195,12 +237,13 @@ config SYS_LS_PPA_FW_ADDR config SYS_LS_PPA_ESBC_ADDR hex "hdr address of PPA firmware loading from" depends on FSL_LS_PPA && CHAIN_OF_TRUST - default 0x600c0000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A - default 0x40740000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A - default 0x40480000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A - default 0x580c40000 if SYS_LS_PPA_FW_IN_XIP && FSL_LSCH3 - default 0x700000 if SYS_LS_PPA_FW_IN_MMC - default 0x700000 if SYS_LS_PPA_FW_IN_NAND + default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A + default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A + default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A + default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A + default 0x680000 if SYS_LS_PPA_FW_IN_MMC + default 0x680000 if SYS_LS_PPA_FW_IN_NAND help If the PPA header firmware locate at XIP flash, such as NOR or QSPI flash, this address is a directly memory-mapped. @@ -217,6 +260,20 @@ config LS_PPA_ESBC_HDR_SIZE endmenu +config SYS_FSL_ERRATUM_A008997 + bool "Workaround for USB PHY erratum A008997" + +config SYS_FSL_ERRATUM_A009007 + bool + help + Workaround for USB PHY erratum A009007 + +config SYS_FSL_ERRATUM_A009008 + bool "Workaround for USB PHY erratum A009008" + +config SYS_FSL_ERRATUM_A009798 + bool "Workaround for USB PHY erratum A009798" + config SYS_FSL_ERRATUM_A010315 bool "Workaround for PCIe erratum A010315" @@ -228,6 +285,7 @@ config MAX_CPUS default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A default 16 if ARCH_LS2080A + default 8 if ARCH_LS1088A default 1 help Set this number to the maximum number of possible CPUs in the SoC. @@ -248,12 +306,27 @@ config QSPI_AHB_INIT But some QSPI flash size up to 64MBytes, so initialize the QSPI AHB bus for those flashes to support the full QSPI flash size. +config SYS_CCI400_OFFSET + hex "Offset for CCI400 base" + depends on SYS_FSL_HAS_CCI400 + default 0x3090000 if ARCH_LS1088A + default 0x180000 if FSL_LSCH2 + help + Offset for CCI400 base + CCI400 base addr = CCSRBAR + CCI400_OFFSET + config SYS_FSL_IFC_BANK_COUNT int "Maximum banks of Integrated flash controller" - depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A + depends on ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A || ARCH_LS1088A default 4 if ARCH_LS1043A default 4 if ARCH_LS1046A - default 8 if ARCH_LS2080A + default 8 if ARCH_LS2080A || ARCH_LS1088A + +config SYS_FSL_HAS_CCI400 + bool + +config SYS_FSL_HAS_CCN504 + bool config SYS_FSL_HAS_DP_DDR bool @@ -296,6 +369,7 @@ config SYS_FSL_PCLK_DIV int "Platform clock divider" default 1 if ARCH_LS1043A default 1 if ARCH_LS1046A + default 1 if ARCH_LS1088A default 2 help This is the divider that is used to derive Platform clock from @@ -362,6 +436,18 @@ config RESV_RAM be at the high end of physical memory. The reserve RAM may be excluded from memory bank(s) passed to OS, or marked as reserved. +config SYS_FSL_EC1 + bool + help + Ethernet controller 1, this is connected to MAC3. + Provides DPAA2 capabilities + +config SYS_FSL_EC2 + bool + help + Ethernet controller 2, this is connected to MAC4. + Provides DPAA2 capabilities + config SYS_FSL_ERRATUM_A008336 bool @@ -386,10 +472,17 @@ config SYS_FSL_ERRATUM_A009660 config SYS_FSL_ERRATUM_A009929 bool + +config SYS_FSL_HAS_RGMII + bool + depends on SYS_FSL_EC1 || SYS_FSL_EC2 + + config SYS_MC_RSV_MEM_ALIGN hex "Management Complex reserved memory alignment" depends on RESV_RAM - default 0x20000000 + default 0x20000000 if ARCH_LS2080A + default 0x70000000 if ARCH_LS1088A help Reserved memory needs to be aligned for MC to use. Default value is 512MB. |