diff options
Diffstat (limited to 'arch/arm/cpu/armv7/uniphier')
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/Kconfig | 31 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/board_early_init_r.c | 15 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/board_late_init.c | 38 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/init_page_table.c | 7 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c | 20 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/uniphier/support_card.c | 125 |
13 files changed, 148 insertions, 98 deletions
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 36b7f11fbe..97602990aa 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -5,15 +5,17 @@ config SYS_SOC default "uniphier" config SYS_CONFIG_NAME - default "ph1_pro4" if MACH_PH1_PRO4 - default "ph1_ld4" if MACH_PH1_LD4 - default "ph1_sld8" if MACH_PH1_SLD8 + default "uniphier" + +config UNIPHIER_SMP + bool choice prompt "UniPhier SoC select" config MACH_PH1_PRO4 bool "PH1-Pro4" + select UNIPHIER_SMP config MACH_PH1_LD4 bool "PH1-LD4" @@ -23,6 +25,29 @@ config MACH_PH1_SLD8 endchoice +choice + prompt "UniPhier Support Card select" + optional + +config PFC_MICRO_SUPPORT_CARD + bool "Support card with PFC CPLD" + help + This option provides support for the expansion board with PFC + original address mapping. + + Say Y to use the on-board UART, Ether, LED devices. + +config DCC_MICRO_SUPPORT_CARD + bool "Support card with DCC CPLD" + help + This option provides support for the expansion board with DCC- + arranged address mapping that is compatible with legacy UniPhier + reference boards. + + Say Y to use the on-board UART, Ether, LED devices. + +endchoice + config CMD_PINMON bool "Enable boot mode pins monitor command" depends on !SPL_BUILD diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 0f64d2591c..4a7b8a9d08 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -11,6 +11,7 @@ obj-y += cache_uniphier.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o obj-y += dram_init.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o +obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o obj-$(CONFIG_UNIPHIER_SMP) += smp.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c new file mode 100644 index 0000000000..cb7e04fc36 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/board.h> + +int board_early_init_r(void) +{ + uniphier_board_late_init(); + return 0; +} diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c index 37300206f6..0622a1e16e 100644 --- a/arch/arm/cpu/armv7/uniphier/board_late_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c @@ -26,42 +26,6 @@ static void nand_denali_wp_disable(void) #endif } -static void nand_denali_fixup(void) -{ -#if defined(CONFIG_NAND_DENALI) && \ - (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4)) - /* - * The Denali NAND controller on some of UniPhier SoCs does not - * automatically query the device parameters. For those SoCs, - * some registers must be set after the device is probed. - */ - void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; - struct mtd_info *mtd; - struct nand_chip *chip; - - if (nand_curr_device < 0 || - nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) { - /* NAND was not detected. Just return. */ - return; - } - - mtd = &nand_info[nand_curr_device]; - chip = mtd->priv; - - writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK); - writel(0, denali_reg + DEVICE_WIDTH); - writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE); - writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE); - writel(1, denali_reg + DEVICES_CONNECTED); - - /* - * chip->scan_bbt in nand_scan_tail() has been skipped. - * It should be done in here. - */ - chip->scan_bbt(mtd); -#endif -} - int board_late_init(void) { puts("MODE: "); @@ -70,7 +34,6 @@ int board_late_init(void) case BOOT_DEVICE_MMC1: printf("eMMC Boot\n"); setenv("bootmode", "emmcboot"); - nand_denali_fixup(); break; case BOOT_DEVICE_NAND: printf("NAND Boot\n"); @@ -80,7 +43,6 @@ int board_late_init(void) case BOOT_DEVICE_NOR: printf("NOR Boot\n"); setenv("bootmode", "norboot"); - nand_denali_fixup(); break; default: printf("Unsupported Boot Mode\n"); diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c index d2738350a3..a0d10a995d 100644 --- a/arch/arm/cpu/armv7/uniphier/init_page_table.c +++ b/arch/arm/cpu/armv7/uniphier/init_page_table.c @@ -28,7 +28,12 @@ #define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \ (IS_INIT_STACK_AREA(x))) #define IS_EXT(x) ((x) < 0x100) -#define IS_REG(x) (0x500 <= (x) && (x) < 0x700) + +/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */ +#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \ + (0x500 <= (x) && (x) < 0x700) || \ + (0xf00 <= (x)) + #define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00) #define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \ diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 62f5b0148d..9d51299308 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 74129bc86a..fd1c432f4f 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 1843d0469f..31ee2a2100 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c index f113db54d1..3c82a1aca4 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c @@ -22,16 +22,7 @@ void sbc_init(void) writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); - if (readl(SBBASE0) & 0x1) { - /* - * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x3effffff: memory bank (31MB) - * 0x03f00000-0x3fffffff: peripherals (1MB) - */ - writel(0x0000be01, SBBASE0); /* dummy */ - writel(0x0200be01, SBBASE1); - } else { + if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. @@ -40,6 +31,15 @@ void sbc_init(void) * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals */ writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x00000000-0x01ffffff: mask ROM + * 0x02000000-0x3effffff: memory bank (31MB) + * 0x03f00000-0x3fffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); } #elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD) #if !defined(CONFIG_SPL_BUILD) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index fba1cc7498..5d682d3ca3 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o -obj-y += platdevice.o +obj-$(if $(CONFIG_OF_CONTROL),,y) += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ clkrst_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 72ec599f69..ea0691dd67 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -14,7 +14,6 @@ SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) -/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { { .base = 0x5a800100, diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c index 40d49409c2..419012e1ab 100644 --- a/arch/arm/cpu/armv7/uniphier/support_card.c +++ b/arch/arm/cpu/armv7/uniphier/support_card.c @@ -83,6 +83,12 @@ static int support_card_show_revision(void) } #endif +int check_support_card(void) +{ + printf("SC: Micro Support Card "); + return support_card_show_revision(); +} + void support_card_init(void) { /* @@ -94,12 +100,6 @@ void support_card_init(void) support_card_reset_deassert(); } -int check_support_card(void) -{ - printf("SC: Micro Support Card "); - return support_card_show_revision(); -} - #if defined(CONFIG_SMC911X) #include <netdev.h> @@ -112,18 +112,14 @@ int board_eth_init(bd_t *bis) #if !defined(CONFIG_SYS_NO_FLASH) #include <mtd/cfi_flash.h> +#include <asm/arch/sbc-regs.h> -#if CONFIG_SYS_MAX_FLASH_BANKS > 1 -static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] = - CONFIG_SYS_FLASH_BANKS_LIST; +struct memory_bank { + phys_addr_t base; + unsigned long size; +}; -phys_addr_t cfi_flash_bank_addr(int i) -{ - return flash_banks_list[i]; -} -#endif - -int mem_is_flash(phys_addr_t base) +static int mem_is_flash(const struct memory_bank *mem) { const int loop = 128; u32 *scratch_addr; @@ -131,8 +127,9 @@ int mem_is_flash(phys_addr_t base) int ret = 1; int i; - scratch_addr = map_physmem(base + 0x01e00000, - sizeof(u32) * loop, MAP_NOCACHE); + /* just in case, use the tail of the memory bank */ + scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop, + sizeof(u32) * loop, MAP_NOCACHE); for (i = 0; i < loop; i++, scratch_addr++) { saved_value = readl(scratch_addr); @@ -150,31 +147,79 @@ int mem_is_flash(phys_addr_t base) return ret; } -int board_flash_wp_on(void) +#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) + /* {address, size} */ +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x02000000, 0x01f00000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x01f00000}, +}; +#endif + +#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) +static const struct memory_bank memory_banks_boot_swap_off[] = { + {0x04000000, 0x04000000}, +}; + +static const struct memory_bank memory_banks_boot_swap_on[] = { + {0x00000000, 0x04000000}, + {0x04000000, 0x04000000}, +}; +#endif + +static const struct memory_bank +*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; + +phys_addr_t cfi_flash_bank_addr(int i) { - int i; - int ret = 1; + return flash_banks_list[i]->base; +} - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - if (mem_is_flash(cfi_flash_bank_addr(i))) { - /* - * We found at least one flash. - * We need to return 0 and call flash_init(). - */ - ret = 0; - } -#if CONFIG_SYS_MAX_FLASH_BANKS > 1 - else { - /* - * We might have a SRAM here. - * To prevent SRAM data from being destroyed, - * we set dummy address (SDRAM). - */ - flash_banks_list[i] = 0x80000000 + 0x10000 * i; +unsigned long cfi_flash_bank_size(int i) +{ + return flash_banks_list[i]->size; +} + +static void detect_num_flash_banks(void) +{ + const struct memory_bank *memory_bank, *end; + + cfi_flash_num_flash_banks = 0; + + if (boot_is_swapped()) { + memory_bank = memory_banks_boot_swap_on; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); + } else { + memory_bank = memory_banks_boot_swap_off; + end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); + } + + for (; memory_bank < end; memory_bank++) { + if (cfi_flash_num_flash_banks >= + CONFIG_SYS_MAX_FLASH_BANKS_DETECT) + break; + + if (mem_is_flash(memory_bank)) { + flash_banks_list[cfi_flash_num_flash_banks] = + memory_bank; + + debug("flash bank found: base = 0x%lx, size = 0x%lx\n", + memory_bank->base, memory_bank->size); + cfi_flash_num_flash_banks++; } -#endif } - return ret; + debug("number of flash banks: %d\n", cfi_flash_num_flash_banks); +} +#else /* ONFIG_SYS_NO_FLASH */ +void detect_num_flash_banks(void) +{ +}; +#endif /* ONFIG_SYS_NO_FLASH */ + +void support_card_late_init(void) +{ + detect_num_flash_banks(); } -#endif |