diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c')
-rw-r--r-- | arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 38 |
1 files changed, 26 insertions, 12 deletions
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c index 15e880accdd..6eb0f305b72 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c @@ -28,17 +28,31 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/hardware.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> +#include <asm/arch/gpio.h> + +/* + * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all + * peripheral pins. Good to have if hardware is soldered optionally + * or in case of SPI no slave is selected. Avoid lines to float + * needlessly. Use a short local PUP define. + * + * Due to errata "TXD floats when CTS is inactive" pullups are always + * on for TXD pins. + */ +#ifdef CONFIG_AT91_GPIO_PULLUP +# define PUP CONFIG_AT91_GPIO_PULLUP +#else +# define PUP 0 +#endif void at91_serial0_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 27, PUP); /* RXD0 */ writel(1 << ATMEL_ID_USART0, &pmc->pcer); } @@ -47,7 +61,7 @@ void at91_serial1_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* TXD1 */ - at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* RXD1 */ + at91_set_a_periph(AT91_PIO_PORTD, 1, PUP); /* RXD1 */ writel(1 << ATMEL_ID_USART1, &pmc->pcer); } @@ -56,7 +70,7 @@ void at91_serial2_hw_init(void) at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* TXD2 */ - at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* RXD2 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, PUP); /* RXD2 */ writel(1 << ATMEL_ID_USART2, &pmc->pcer); } @@ -64,7 +78,7 @@ void at91_seriald_hw_init(void) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* DRXD */ + at91_set_a_periph(AT91_PIO_PORTC, 30, PUP); /* DRXD */ at91_set_a_periph(AT91_PIO_PORTC, 31, 1); /* DTXD */ writel(1 << ATMEL_ID_SYS, &pmc->pcer); } @@ -74,9 +88,9 @@ void at91_spi0_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_b_periph(AT91_PIO_PORTA, 0, 0); /* SPI0_MISO */ - at91_set_b_periph(AT91_PIO_PORTA, 1, 0); /* SPI0_MOSI */ - at91_set_b_periph(AT91_PIO_PORTA, 2, 0); /* SPI0_SPCK */ + at91_set_b_periph(AT91_PIO_PORTA, 0, PUP); /* SPI0_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 1, PUP); /* SPI0_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 2, PUP); /* SPI0_SPCK */ /* Enable clock */ writel(1 << ATMEL_ID_SPI0, &pmc->pcer); @@ -111,9 +125,9 @@ void at91_spi1_hw_init(unsigned long cs_mask) { at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* SPI1_MISO */ - at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* SPI1_MOSI */ - at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_SPCK */ + at91_set_a_periph(AT91_PIO_PORTB, 12, PUP); /* SPI1_MISO */ + at91_set_a_periph(AT91_PIO_PORTB, 13, PUP); /* SPI1_MOSI */ + at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_SPCK */ /* Enable clock */ writel(1 << ATMEL_ID_SPI1, &pmc->pcer); |