diff options
Diffstat (limited to 'CHANGELOG')
-rw-r--r-- | CHANGELOG | 2392 |
1 files changed, 2392 insertions, 0 deletions
diff --git a/CHANGELOG b/CHANGELOG index 963ec5d1142..e9c2c82e8f0 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,2202 @@ +commit 5fc56b907d993260b9ebdb137af66fe69635ae9e +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Fri Jan 30 16:36:40 2009 -0600 + + Add feature-removal-schedule.txt + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 255d28e1642e8fc32a6753226be1a96b481ce111 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 10 09:32:38 2009 +0100 + + 8xx serial, smc: Coding-Style cleanup serial SMC driver + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 2b3f12c214346508cae3f1245808c1ca54c81fdd +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 10 09:31:47 2009 +0100 + + 8xx serial, smc: add configurable SMC Rx buffer len + + This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN. + With this option it is possible to allow the receive + buffer for the SMC on 8xx to be greater then 1. In case + CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the + old version. + + When defining CONFIG_SYS_SMC_RXBUFLEN also + CONFIG_SYS_MAXIDLE must be defined to setup the maximum + idle timeout for the SMC. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit e915f8bb73d74178bc21d3a457959883b1afd1c0 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Feb 5 21:04:36 2009 -0500 + + common/{hush, kgdb, serial}.c: build by COBJS-$(...) in Makefile + + Move global '#ifdef CONFIG_xxx .... #endif' out of the .c files and into + the COBJS-$(CONFIG_xxx) in the Makefile. Also delete unused var in kgdb + code in the process. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ab76e9848a1f4db64d14233741d739a3b3360c93 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Feb 5 21:04:50 2009 -0500 + + bzip2: move ifdef handling to Makefile COBJS-$(...) + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ae0b05df04e1cc65c5ad19ccd362f4be82df7316 +Author: Jerry Van Baren <gvb.uboot@gmail.com> +Date: Thu Feb 5 22:18:02 2009 -0500 + + Fix whitespace damage: double space changed to a tab + + At some point an intentional double space at the end of the sentence + got changed into a tab in the GPL header line: + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + This patch fixes the damage. + + Signed-off-by: Gerald Van Baren <vanbaren@cideas.com> + +commit 4f975678de995b55749d5e84590c268972a7c835 +Author: Heiko Schocher <hs@denx.de> +Date: Tue Feb 10 09:53:29 2009 +0100 + + cfi: make flash_get_info() non static + + If on your board is more than one flash, you must know + the size of every single flash, for example, for updating + the DTS before booting Linux. So make this function + flash_get_info() extern, and you can have all info + about your flashes. + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 86321fc1128c93a10ac4afb9d317b0df8ece0f9e +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Thu Feb 5 23:58:25 2009 -0800 + + net: removed board-specific CONFIGs from MPC5xxx FEC driver + + Added new CONFIG options for the three type of MAC-PHY interconnect and + applied them all relevant board config files + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 638ed3e296e70fab286d157b7adedaaa4a09a474 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Feb 5 21:04:47 2009 -0500 + + net/sntp.c: move ifdef into Makefile COBJS-$(...) + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 9e5be8214ba751436e57c3be044bf6dccb9a6687 +Author: Andy Fleming <afleming@freescale.com> +Date: Tue Feb 3 18:26:41 2009 -0600 + + tsec: Fix a bug in soft-resetting + + SOFT_RESET must be asserted for at least 3 TX clocks. Usually, that's about 30 + clock cycles, so it's been mostly working. But we had no guarantee, and at + slower bitrates, it's just over a microsecond (over 1000 clock cycles). This + enforces a 2 microsecond gap between assertion and deassertion. + + Signed-off-by: Andy Fleming <afleming@freescale.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 09fcc8b5d86903b76e7e4d1d879d6f4bca25c27b +Author: Simon Munton <simon@nidoran.m5data.com> +Date: Mon Feb 2 09:44:08 2009 +0000 + + Fix 100Mbs ethernet operation on sh7763 based boards + + 100Mbs ethernet does not work on sh7763 chips due to the wrong value being + used in the GECMR register. Following diff fixes the problem + + Signed-off-by: Simon Munton <simon@nidoran.m5data.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 2bc2a8f6dc9fdda465317da59474e65c24a398a2 +Author: ksi@koi8.net <ksi@koi8.net> +Date: Fri Feb 6 16:27:55 2009 -0800 + + Fix MPC8260 with ethernet on SCC + + This fixes MPC8260 compilation with ethernet on SCC. Probably was a + typo or something... + + Signed-off-by: Sergey Kubushyn <ksi@koi8.net> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit ae5d8f613cec1a6af7bf1fc9c42a3b856f021023 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 30 12:56:15 2009 +0100 + + 82xx serial, smc: Coding-Style cleanup serial SMC driver + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit c92fac91a06c60f874c605e3ca80dd407c1caaa7 +Author: Heiko Schocher <hs@denx.de> +Date: Fri Jan 30 12:55:38 2009 +0100 + + 82xx serial, smc: add configurable SMC Rx buffer len + + This patch adds the configuration option CONFIG_SYS_SMC_RXBUFLEN. + With this option it is possible to allow the receive + buffer for the SMC on 82xx to be greater then 1. In case + CONFIG_SYS_SMC_RXBUFLEN == 1 this driver works as the + old version. + + When defining CONFIG_SYS_SMC_RXBUFLEN also + CONFIG_SYS_MAXIDLE must be defined to setup the maximum + idle timeout for the SMC. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit bced7ccefa08512c54a6d146658ff7dbc33d5dfe +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 6 08:08:06 2009 -0600 + + ppc: Fix roll over bug in flush_cache() + + If we call flush_cache(0xfffff000, 0x1000) it would never + terminate the loop since end = 0xffffffff and we'd roll over + our counter from 0xfffffe0 to 0 (assuming a 32-byte cache line) + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 87c9063963561d3d01064be34d0c30855a56587b +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 5 20:40:58 2009 -0600 + + ppc: Move CONFIG_MAX_MEM_MAPPED to common config.h + + Moved CONFIG_MAX_MEM_MAPPED to the asm/config.h so its kept consistent + between the two current users (lib_ppc/board.c, 44x SPD DDR2). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + Acked-by: Stefan Roese <sr@denx.de> + +commit 47d41cc3a11a03c6d56146d056145df73f47eb50 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Thu Feb 5 20:40:57 2009 -0600 + + Add an architecture specific config.h for common defines + + We have common defines that we duplicate in various ways. Having an + arch specific config.h gives us a common location for those defines. + + Eventually we should be able to replace this when we have proper + Kconfig support. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4c78d4a6c01621721b732418e1c6da684a56bbb1 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:56 2009 -0600 + + mpc8641hpcn: Change PCI MEM pci bus address + + Now that the rest of u-boot can support it, change the PCI bus + address of the PCI MEM regions from 0x80000000 to 0xc0000000, + and use the same bus address for both PCI1 and PCI2. This will + maximize the amount of PCI address space left over to map RAM + on systems with large amounts of memory. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 1785dbeed43599eed1d8875673c96912cd770141 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:55 2009 -0600 + + drivers/block/ahci: Fix pci mapping bug + + The code assumes that the pci bus address and the virtual + address used to access a region are the same, but they might + not be. Fix this assumption. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit d591a80e74091e7a0658d165721e6c7de2ef0bcd +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:54 2009 -0600 + + MPC8641HPCN: Enable CONFIG_ADDR_MAP + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 49f46f3bf08aaf7b1db131a1082f1e603bb7a94b +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:53 2009 -0600 + + mpc8641hpcn: Clean up PCI mapping concepts + + Clean up PCI mapping concepts in the 8641 config - rename _BASE + to _BUS, as it's actually a PCI bus address, separate virtual + and physical addresses into _VIRT and _PHYS, and use each + appopriately. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit c9315e6b4f244981de0b2eaaa29a7838a165b494 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:52 2009 -0600 + + mpc86xx: Add support to populate addr map based on BATs + + If CONFIG_ADDR_MAP is enabled, update the address map + whenever we write a bat. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit d35ae5a938679bd7e18167faf79d0fb3c6639b51 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:51 2009 -0600 + + powerpc: Move duplicated BAT defines to mmu.h + + The BAT fields are architected; there's no need for these to be in + cpu-specific files. Drop the duplication and move these to + include/asm-ppc/mmu.h. Also, remove the BL_xxx defines that were only + used by the alaska board, and switch to using the BATU_BL_xxx defines + used by all the other boards. The BL_ defines previously in use + had to be shifted into the proper position for use, which was inefficient. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 6e61fae4d360a1380b63e7d007b31477e366bcce +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:50 2009 -0600 + + drivers/pci: Create pci_map_bar function + + It is no longer always true that the pci bus address can be + used as the virtual address for pci accesses. pci_map_bar() + is created to return the virtual address for a pci region. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 2ecca3401775b125c3b9ff65766befb23989414b +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Tue Feb 3 18:10:49 2009 -0600 + + mpc8641hpcn: Set up outbound pci windows before inbound + + Because the inbound pci windows are mapped generously, set up + the more specific outbound windows first. This way, when we + search the pci regions for something, we will hit on the more + specific region. This can actually be a problem on systems + with large amounts of RAM. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit b81b773ead0687114dc8a800f99ea6e504447739 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Mon Feb 2 16:34:52 2009 -0600 + + mpc8641hpcn: Use physical address in flash banks defintion + + If the VA and PA of the flash aren't the same, the banks list + should be initialized to hold the physical address. Correct this. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + +commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 6 09:49:32 2009 -0600 + + pci: give preference to non-PCI_REGION_SYS_MEMORY regions when matching + + When we search for an address match in pci_hose_{phys_to_bus,bus_to_phys} + we should give preference to memory regions that aren't system memory. + + Its possible that we have over mapped system memory in the regions and + we want to avoid depending on the order of the regions. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit ff4e66e93c1ad47644be3b4ffd6a46e1ce9b6612 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Fri Feb 6 09:49:31 2009 -0600 + + pci: Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY for clarity + + The PCI_REGION_MEMORY and PCI_REGION_MEM are a bit to similar and + can be confusing when reading the code. + + Rename PCI_REGION_MEMORY to PCI_REGION_SYS_MEMORY to clarify its used + for system memory mapping purposes. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 8da601280a8acbc3385784780ed35130e53812f1 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Feb 4 13:47:22 2009 -0600 + + NAND: Add timeout for reset command + + Without the timeout present an infinite loop can occur if the + NAND device is broken or not present. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 10dc6a9bef73d7d4cb25b3fde27ee91f8484b126 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Wed Feb 4 13:39:40 2009 -0600 + + NAND: Silence warning when CONFIG_SYS_NAND_QUIET_TEST + + Commit cfa460adfdefcc30d104e1a9ee44994ee349bb7b removed support + for disabling the "No NAND device found!!!" warning when + CONFIG_SYS_NAND_QUIET_TEST was defined. This re-adds support + for silencing the warning. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit ad09ab2e3ac28f304372eceb4a5cb4d24e102a13 +Author: Valeriy Glushkov <gvv@lstec.com> +Date: Mon Jan 19 16:32:59 2009 +0200 + + NAND: Fixed invalid pointers to static relocated chip names + + Dear Wolfgang, + + You are right, the patch was ugly. + The new one seems to be better. + + Signed-off-by: Valeriy Glushkov <gvv@lstec.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 5a9427dc9b8438759db3f67a1e547062f76eb18d +Author: derek@siconix.com <derek@siconix.com> +Date: Mon Jan 26 14:08:17 2009 -0700 + + env_nand: fix env memory release + + This fixes a bug that tmp environment memory not being released. + + Signed-off-by: Derek Ou <dou@siconix.com> + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 6989e4f546d960a407dd5425f800dff9751c8132 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Thu Feb 5 09:33:50 2009 -0500 + + Coldfire: M527x: Add missing GPIO register address defines + + Add missing GPIO registers address definition for Coldfire M5271. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit c4ff77f5e6c3a01610ce97434c0d59acb1476f95 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 14:42:58 2009 -0500 + + Coldfire: mcfmii: Allow non-autonegotiating PHYs to use mii command + + Modified mii_init to support boards with PHYs that are not set to + autonegotiate, but still want to use u-boot's mii commands to probe + the smi bus. Such PHYs will not set the Autonegotiate-done bit. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit 92d3e6e0ffcbb7224c83104f8d87b5b4bf39a38f +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 11:44:30 2009 -0500 + + Coldfire: Applied baudrate formula of serial_init to serial_setbrg + + Applied the patch for baudrate divider value truncation for + serial_init to serial_setbrg as well. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit 8706ef378f2db1ef65b9c2f909561f23e3dc2148 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 14:07:05 2009 -0500 + + Coldfire: M5271EVB: Board header update (dependencies) + + Cleanup for M5271EVB: + Added clarification on the use of CONFIG_SYS_CLOCK. + Modified to use u-boot's HUSH parser. + Cleanup on environment settings. + Removed compiler warning by defining CONFIG_SYS_CS0_* + + Dependencies: + Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier. + This depends on a patch to include/asm-m68k/m5271.h + that defines the multiplier and divider ratios. + + Removed the definition of CONFIG_SYS_FECI2C. + This depends on a patch that removes the use of it in + cpu/mcf52x2/cpu_init.c + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit e0db344fabfeb4f9649846f94838f51172f6a1f6 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Thu Jan 29 14:36:06 2009 -0500 + + Coldfire: M5271: Allow board header file to specify clock multiplier + + M5271 dynamic clock multiplier. It is currently fixed at 100MHz. + + Allow the board header file to set their own multiplier and divider. + Added the #define for the multiplier and divider to the cpu header file. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit d1ef25dd81c79dcfad5c2ff0162b1bea21d04bc3 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 10:47:13 2009 -0500 + + Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C + + Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB). + Use read-modify-write to activate the FEC pins without disabling I2C. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit ee73cc59ab904976af3c33b454fc84f78618b2d1 +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 09:45:34 2009 -0500 + + Coldfire: cmd_bdinfo cleanup + + CONFIG_M68K bdinfo cleanup: + + Fixed compiler warning about baudrate printing. + format '%d' expects type 'int', but argument 2 has type 'long unsigned int'. + + Added printing of "cpufreq" + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit 4ffc39050aa46ed8a3d29732293dff769e54fffa +Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> +Date: Fri Jan 23 09:27:00 2009 -0500 + + Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list + + Added the CONFIG_M5271 to the list of Coldfire V2 processor. This + was causing the bus clock (not CPU clock) to be declared twice as + fast as it actually is. This causes UARTS to operate at half the + specified baudrate. + + Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com> + +commit 59d1bda7f92c8a28c3aba94e48063749d425949f +Author: Dirk Eibach <eibach@gdsys.de> +Date: Tue Feb 3 15:15:21 2009 +0100 + + ppc4xx: Make PCIE support selectable + + On some platforms PCIE support is not required, but would be included + because the cpu supports it. To reduce fooprint it is now configurable + via CONFIG_PCI_DISABLE_PCIE. + + Signed-off-by: Dirk Eibach <eibach@gdsys.de> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit b129eff5ede394cc1faeb6dbf6a987e91abce552 +Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Date: Tue Feb 3 22:13:16 2009 +0100 + + ppc4xx: Only fixup opb attached UARTs + + This patch updates the fdt UART clock fixup code to + only touch CPU internal UARTs on 4xx systems. + Only these UARTs are definitely clocked by gd->uart_clk. + + Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 4b7e3d045cc82f7f7b6f3a19b54a814da36ac52c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Jan 13 11:00:29 2009 -0500 + + Blackfin: move default boot SPI CS to common code + + Move the default SPI CS that we boot from into common code so that it can + be used in other SPI drivers and environment settings. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit f790ef6ff12381cb0e43de54fb2b0f1204ad8ed6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Dec 10 12:33:54 2008 -0500 + + Blackfin: dynamically update UART speed when initializing + + Previously, booting over the UART required the baud rate to be known ahead + of time. Using a bit of tricky simple math, we can calculate the new board + rate based on the old divisors. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org> + +commit 97f265f14f23050f3cb997f617f3a6917b843ea2 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Dec 9 17:21:08 2008 -0500 + + Blackfin: add support for fast SPI reads with Boot ROM + + Newer Blackfin boot roms support using the fast SPI read command rather than + just the slow one. If the functionality is available, then use it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 67619982bfc5cd62710a48e3cbffc304cb78c341 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:46:52 2008 -0400 + + Blackfin: check for reserved settings in DDR MMRs + + Some bits of the DDR MMRs should not be set. If they do, bad things may + happen (like random failures or hardware destruction). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 622a8dc0958dd599743348ea94eb10b9d0be8ae6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:54:00 2008 -0400 + + Blackfin: set default voltage levels for BF538/BF539 parts + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 09dc6b0bbd1d5e39cdddeebc059f9a75630e4f6f +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Jun 1 01:29:57 2008 -0400 + + Blackfin: use on-chip syscontrol() rom function when available + + Newer Blackfin's have an on-chip rom with a syscontrol() function that needs + to be used to properly program the memory and voltage settings as it will + include (possibly critical) factory tested bias values. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e1fb6d0d52fbe3fbc1a4c651dacf11e9c1417f63 +Author: Stefan Roese <sr@denx.de> +Date: Thu Feb 5 11:44:52 2009 +0100 + + cfi_flash: Fix typo in cfi_flash.c + + Patch "flash/cfi_flash: Use virtual sector start address, not phys" + introduced a small typo and compilation warning for systems with CFI + legacy support (e.g. hcu4). This patch fixes it. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 28745db969b72693754991c838f68a7fb4a8b1ab +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 29 11:21:38 2009 +0100 + + jedec_flash: Only use manufacturer defines from common flash.h + + This patch removes the double defined manufacturer defines from + jedec_flash.c. Since the common defines in flash.h are 32bit + we now need the (16) cast. This patch also removes the compilation + warning (e.g. seen on hcu5): + + ./MAKEALL hcu5 + Configuring for hcu5 board... + jedec_flash.c:219: warning: large integer implicitly truncated to unsigned type + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ec21d5cfcb6b4e7fcdd5c6e926e1a824900706f2 +Author: Stefan Roese <sr@denx.de> +Date: Thu Feb 5 11:25:57 2009 +0100 + + cfi_flash: Silence compilation warning + + Patch "flash/cfi_flash: Use virtual sector start address, not phys" + introduced a small compilation warning. This patch fixes it. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 09ce9921a7d8b1ce764656b14b42217bbf4faa38 +Author: Becky Bruce <beckyb@kernel.crashing.org> +Date: Mon Feb 2 16:34:51 2009 -0600 + + flash/cfi_flash: Use virtual sector start address, not phys + + include/flash.h was commented to say that the address in + flash_info->start was a physical address. However, from u-boot's + point of view, and looking at most flash code, it makes more + sense for this to be a virtual address. So I corrected the + comment to indicate that this was a virtual address. + + The only flash driver that was actually treating the address + as physical was the mtd/cfi_flash driver. However, this code + was using it inconsistently as it actually directly dereferenced + the "start" element, while it used map_physmem to get a + virtual address in other places. I changed this driver so + that the code which initializes the info->start field calls + map_physmem to get a virtual address, eliminating the need for + further map_physmem calls. The code is now consistent. + + The *only* place a physical address should be used is when defining the + flash banks list that is used to initialize the flash_info struct, + usually found in the board config file. + + Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 657f2062d8e17ebf4a55f52c9e71c07c0c94c779 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Feb 4 09:42:20 2009 +0100 + + Fix compiler warning + + (shows up only when DEBUG is enabled) + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 47832cd15ae02fb6fde8ebed5b272f85775f2ceb +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:45:55 2008 -0400 + + Blackfin: update anomaly lists + + Update the anomaly lists to match latest anomaly sheets. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 70a4da45e16b72e8e5b0baaecdaee9be8619647d +Author: Ralph Kondziella <rk@argos-messtechnik.de> +Date: Mon Jan 26 12:34:36 2009 -0700 + + ADS5121 Add PATA support + + Original patch from Ralph Kondziella + plus clean up by Wolfgang Denk + plus changes by John Rigby + use ips clock not lpc + port forward to current u-boot release + + Signed-off-by: Ralph Kondziella <rk@argos-messtechnik.de> + Signed-off-by: Wolfgang Denk <wd@denx.de> + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit abfbd0ae4967df18102345db4f4b529a13da107b +Author: Martha Marx <mmarx@silicontkx.com> +Date: Mon Jan 26 10:45:07 2009 -0700 + + ADS5121 Add IC Ident Module (IIM) support + + IIM (IC Identification Module) is the fusebox for the mpc5121. + Use #define CONFIG_IIM to turn on the clock for this module + use #define CONFIG_CMD_FUSE to add fusebox commands. + Fusebox commands include the ability to read + the status, read the register cache, override the register cache, + program the fuses and sense them. + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit 14d19cd1bce9a24b1335598f1568140f4950e4d9 +Author: John Rigby <jrigby@freescale.com> +Date: Fri Jan 23 10:33:15 2009 -0700 + + ADS5121 Fix rev2 silicon pci iopad config + + Reset config is not correct + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit 4c154252c480b13f69ce1b71a9530b0515da76a6 +Author: John Rigby <jrigby@freescale.com> +Date: Wed Nov 19 13:57:34 2008 -0700 + + ADS5121 DIU Add diu_bmp_addr env + + Add support for using a bmp other than + FSL_Logo_BMP for the DIU splash screen. + + Can now set the env var "diu_bmp_addr" to + the address of a BMP in flash to use instead + of the default FSL_Logo_BMP. + + Signed-off-by: Martha Marx <mmarx@silicontkx.com> + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit 92c20fbd3a7788c1a154f50a3f44f28a7763f99a +Author: John Rigby <jrigby@freescale.com> +Date: Thu Oct 30 16:39:35 2008 -0600 + + ADS5121 DIU Make inclusion of FSL logo optional + + Make inclusion of FSL logo optional and + turn it off by default. + + Signed-off-by: John Rigby <jrigby@freescale.com> + +commit bd99ec149abe94e7f6b2bda4766d701b4005053f +Author: Remy Bohmer <linux@bohmer.net> +Date: Sun Feb 1 12:27:53 2009 +0100 + + Compile warning fix in onenand_uboot.h + + Regression since merge window after 2009.01 + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit a270d1e7295c3d829f42c0480117941dfc1c6477 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 29 06:33:55 2009 +0100 + + USB: Add EHCI support for VCT EHCI controller (really with driver now) + + Somehow I missed the real driver part in my last patch version. This patch + now adds the driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 716ebf436c9e43df6740e0172f6b2a81ddbf1b8e +Author: Cliff Cai <cliff.cai@analog.com> +Date: Sat Nov 29 18:22:38 2008 -0500 + + Blackfin: add driver for on-chip MMC/SD controller + + This is a port of the Linux Blackfin on-chip SDH driver to U-Boot. + + Signed-off-by: Cliff Cai <cliff.cai@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6e87ea0ca951465eba144ab2e6dba6fb507737a2 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 22:47:34 2008 -0400 + + Blackfin: add port muxing for BF51x SPI + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit fc68f9f85959664d528daea2aef5ef54974331ce +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Jan 6 06:16:19 2009 -0500 + + Blackfin: output booting source when booting + + Knowing the booting source of the part is useful, especially when the part + can switch dynamically between sources. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8df3ce0f49c37947800ac7c84e751499882619fc +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Dec 11 06:30:46 2008 -0500 + + Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom + + Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by + the Blackfin on-chip bootrom to boot out of SPI flash. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2b4a486e6fac502d8b883e344cc4012283945b3d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Dec 11 04:06:26 2008 -0500 + + Blackfin: update asm-blackfin/posix_types.h to latest Linux version + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e5eb93e77391bcc308697116c544ea1340aaae8a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Dec 6 02:54:52 2008 -0500 + + Blackfin: add port I bits + + Some people need to access port I, so make sure the pins are defined. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8a6b272596d43de0db4943eac7af58c3534c4026 +Author: Sonic Zhang <Sonic.Zhang@analog.com> +Date: Wed Nov 26 22:16:45 2008 -0500 + + Blackfin: add driver for on-chip ATAPI controller + + This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot. + + Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit be9d8c780e6831cb84b7d4590ceae03dca8fc10b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 26 21:43:06 2008 -0500 + + Blackfin: add driver for on-chip NAND controller + + This is a port of the Linux Blackfin on-chip NFC driver to U-Boot. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 4148e02abae9a099f4444b5e168ebc2b911d2295 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 12 07:18:15 2008 -0500 + + Blackfin: build with -mno-fdpic + + Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build + up u-boot, including ones that output FDPIC ELF by default. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 70e95589a24a2d83ad00317e4a9611d0211ecb58 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Nov 11 05:43:57 2008 -0500 + + Blackfin: fix up EBIU defines + + The EBIU defines for EBSZ 256/512 were incorrect. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 961954ea0ec8dc4341034c1a1ff3107ec0527809 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 5 12:45:24 2008 -0500 + + Blackfin: use 8/16/32 bit transfer widths in dma_memcpy() + + Rather than using 8bit transfers for everything, use 8/16/32 bit transfers + as usable with the source/destination addresses and the count size. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b93c68648426f906d63b98117496b6415f505f39 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 5 08:50:23 2008 -0500 + + Blackfin: only flag L1 instruction for DMA memcpy + + The performance difference from doing an 8 bit DMA memcpy vs an optimized + core memcpy can be pretty big when you add in the overhead of setting up the + MDMA registers, cache flushes, etc... So only use dma_memcpy() when we + actually require it. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit e347c092a3b3a2ce1e72f25f4829163634d09fbe +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 5 07:20:37 2008 -0500 + + Blackfin: dma_memcpy(): fix random failures + + We have to make sure the DMA channel is actually disabled in hardware before + attempting to reprogram it. Otherwise the new settings are ignored and we + end up with random hangs/failures. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit fdce83c108846d6f0d5b1774e1cc29f2573a6ad3 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Nov 4 00:04:03 2008 -0500 + + Blackfin: rewrite cache handling functions + + Take the cache flush functions from the kernel as they use hardware loops in + order to get optimal performance. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 84c5f0dc47d17593fd81206614891bdc94f6d51c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Nov 3 22:30:05 2008 -0500 + + Blackfin: setup bi_enetaddr for single nets + + For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup + based on $ethaddr, so set it up. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 40599239e7875b39e2a5c12e6545992041c72c52 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Oct 24 22:48:47 2008 -0400 + + Blackfin: cache core/system clock values + + Calculating the clocks requires a bit of calls to gcc math functions, so + cache the values after the first run since they'll most likely never + change once U-Boot is up and running. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6957a6209b02f6b69607fc47425f13731cc477f1 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Oct 24 18:18:16 2008 -0400 + + Blackfin: enable --gc-sections + + Start building all Blackfin boards with -ffunction-sections/-fdata-sections + and linking with --gc-sections. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit ee1d2001ea7fbabb2b9256026dc5468f057337f8 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 20 21:08:54 2008 -0400 + + Blackfin: dont check baud if it wont actually get used + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 400f5778f375bc99c73c8488c555def261ccfab7 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Oct 14 07:54:09 2008 -0400 + + Blackfin: add driver for on-chip SPI controller + + This fills out the SPI backend for the Blackfin on-chip SPI peripheral. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 7a1e87b1062e6eac0704c6fc2f7c661caf8814cd +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 18 05:33:51 2008 -0400 + + Blackfin: only build post code when CONFIG_POST + + Save some time by using CONFIG_POST in the Makefile rather than C files. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6d7d4803c74bb86e1b401b1199e63381a62b9382 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Jan 8 11:57:57 2009 -0500 + + Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues + + Redo how pointers are managed to get rid of ugly casts and strict pointer + aliasing issues that are highlighted by gcc 4.3. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 092d2487baf7c29343c165e3ae82ea8a7f9e679b +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Dec 9 17:46:21 2008 -0500 + + Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII + + No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that + does exactly the same thing as common "CONFIG_RMII". + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 8eed6ca51e50fade6887e8bdb1ff6a44116b42b5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Nov 5 06:36:15 2008 -0500 + + Blackfin: bfin_mac: use common debug() + + Rather then defining our own DEBUGF(), just use the common debug(). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit a7ec6ac8b2c6dce6fc670a2a855deb6eee340e04 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 20 13:59:51 2008 -0400 + + Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ} + + Rather than having the on-chip MAC hardcoded to phy address 1 and a speed + of 2.5mhz, use these as defaults if the board doesn't specify otherwise. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit ac45af4e63ea925f4accc98453aab1a1166c196d +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Oct 14 04:52:00 2008 -0400 + + Blackfin: bfin_mac: cleanup MII/PHY functions + + Cleanup and rewrite the MII/PHY related functions so that we can reuse the + existing common linux/miiphy.h code and hook into the `mii` command. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 6b310a05f0d10c751f22468040932139f71c71d3 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Oct 14 00:31:30 2008 -0400 + + Blackfin: bfin_mac: set MDCDIV based on SCLK + + Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK), + use the real algorithm so it gets set correctly regardless of SCLK. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Acked-by: Ben Warren <biggerbadderben@gmail.com> + +commit 930590f3e49c8f32256edf2e5861e1535a329c6c +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 09:10:48 2009 +0100 + + ixp: move serial to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit f90c8022f448bc5e93090e4b714368e52e912f0f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 09:04:58 2009 +0100 + + ixp: move pci init in arm/board instead of cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 8cb79b5f275f1888ccb278a2d2197140444a84b7 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 08:56:49 2009 +0100 + + ixp: move pci drivers to drivers/pci + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 012d5bab09a534e4800b02f50cf508e6837202ea +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 08:53:44 2009 +0100 + + ixp: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit f693f501d67434df1f815fd1824a71973ae08207 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 08:53:44 2009 +0100 + + ixp: add missing os define + + need by arm-elf toolchains and no impact on the arm-linux one + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit b4e2f89dfcb206a22d34fa6b34878d85b498b39f +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sat Jan 31 09:53:39 2009 +0100 + + ixp: remove the option to include the Microcode + + instead the board will have to load it from flash or ram + which will be specified by npe_ucode env var + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 1b017baf2071d8daf643bce87250db898c606c66 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Jan 30 09:45:23 2009 +0100 + + ixp/npe: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 4e69087a1d6ef2eca6f46026cf5e7399b6c9e7c0 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Jan 28 21:58:04 2009 +0100 + + SX1: add hardware V2 support + + In the V2 the 2 flash has been replace by one 32MB flash + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit f877f2233dbcd7417c2f0babe6a849099b167f3c +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Jan 28 21:58:03 2009 +0100 + + SX1: Fix second flash mapping + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 47fd3bffed6430c91eb2660f859574ed98be5bd8 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Jan 28 21:58:03 2009 +0100 + + SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit cfca33837ec83829c6a49c3bcc86c31bc2495ff6 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Wed Jan 28 21:57:59 2009 +0100 + + move Samsung's board to board/samsung + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit e4943ec57466ea5dfa085e7a9e0ec44cb93c4e1e +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Jan 29 12:07:21 2009 +0100 + + move ARM Ltd. to vendor dir + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit a87fb1b308a2a375cb9ca74ca0dd3e2c5793d3bf +Author: Larry Johnson <lrj@acm.org> +Date: Wed Jan 28 15:30:37 2009 -0500 + + ppc4xx: Clean up configuration file for Korat board + + This patch updates the default environmental variables for the + Korat PPC 440EPx board, and makes additional minor fixes. + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f20405e31680efc36293c59b4963db57c9d93df4 +Author: Larry Johnson <lrj@acm.org> +Date: Wed Jan 28 15:30:02 2009 -0500 + + ppc4xx: Add variable "korat_usbcf" for Korat board + + The new environment variable "korat_usbcf" selects the USB + port used by the Korat board's CompactFlash controller. + + Signed-off-by: Larry Johnson <lrj@acm.org> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit fc01ea1e27d5b124f0a1868d0ce569f156d58dfe +Author: Gunnar Rangoy <gunnar@rangoy.com> +Date: Fri Jan 23 12:56:31 2009 +0100 + + AVR32: macb - Search for PHY id + + This patch adds support for searching through available PHY-addresses in + the macb-driver. This is needed for the ATEVK1100 evaluation board, + where the PHY-address will be initialized to either 1 or 7. + + This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when + enabled tells the driver to search for the PHY address. + + Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com> + Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com> + Signed-off-by: Olav Morken <olavmrk@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit af8626e0c08a780d9ded1d9c4883a89355f60e75 +Author: Olav Morken <olavmrk@gmail.com> +Date: Fri Jan 23 12:56:26 2009 +0100 + + Fix IP alignment problem + + This patch removes volatile from: + volatile IP_t *ip = (IP_t *)xip; + + Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when + using volatile, which causes an exception since xip isn't aligned on a word + boundary. + + Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com> + Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com> + Signed-off-by: Olav Morken <olavmrk@gmail.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 12a8b9db12f82a189ff143a58731007f5469da61 +Author: Ron Madrid <ron_madrid@sbcglobal.net> +Date: Wed Jan 28 16:17:21 2009 -0800 + + Marvell 88E1118 interrupt fix + + This patch adjusts the LED control so that interrupt lines are not reading LEDs + and effectively causing indefinite interrupts to the controller. + + Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 9a37f2acc31a3296dddd3574ea9eaf7f319807b9 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 21 17:14:26 2009 +0100 + + net: smc911x.c: Add LAN9211 to chip_ids[] array + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 75edebe3011c963a7cd84be0f4a987477f2aaf89 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Tue Jan 27 16:53:39 2009 -0500 + + Move is_valid_ether_addr() to include/net.h + + Import the is_valid_ether_addr() function from the Linux kernel. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 268859338c0188eab1d0d3b867b7dad3c5cc734a +Author: Michal Simek <monstr@monstr.eu> +Date: Mon Jan 5 12:25:13 2009 +0100 + + net: Sort Makefile labels + + Signed-off-by: Michal Simek <monstr@monstr.eu> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 1fbcbe9a95f39afb2df6ab8cba25b284b47ebfb2 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 28 23:06:42 2009 +0100 + + 85xx: Fix compile breakage with sbc8540 and sbc8560 + + This fixes an error which raises just a warning: + sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 62625c0b081bd4019cecab14e9fc2e05e48d2a58 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Jan 28 13:48:55 2009 -0500 + + SPD823TS: do not define CONFIG_CMD_ENV + + Since the SPD823TS board does not actually have any writable flash to save + its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is + disabled. + + This fixes the build error: + common/libcommon.a(cmd_nvedit.o): In function `do_saveenv': + common/cmd_nvedit.c:557: undefined reference to `saveenv' + make: *** [u-boot] Error 1 + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 7379f45a7bc71941c3920c2f6b3c3faa4d7fd315 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Wed Jan 28 21:40:16 2009 +0100 + + OMAP3: Add Zoom1 board support + + Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here: + http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit + + Signed-off-by: Nishanth Menon <nm@ti.com> + Signed-off-by: Jason Kridner <jkridner@beagleboard.org> + +commit 2be2c6cc674e26237962f5cf4c0d311e139e4241 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Wed Jan 28 21:39:58 2009 +0100 + + OMAP3: Add Pandora support + + Add Pandora support. + + Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + Signed-off-by: Jason Kridner <jkridner@beagleboard.org> + +commit ad9bc8e52d174d699d1367be0b90089e4fdeb933 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Wed Jan 28 21:39:58 2009 +0100 + + OMAP3: Add EVM board + + Add EVM board support. + + Signed-off-by: Manikandan Pillai <mani.pillai@ti.com> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + Signed-off-by: Jason Kridner <jkridner@beagleboard.org> + +commit 9d0fc8110e7e755239329c26f300d5fc9946d3ec +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Wed Jan 28 21:39:57 2009 +0100 + + OMAP3: Add Overo board + + Add Overo board support. + + Signed-off-by: Steve Sakoman <sakoman@gmail.com> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + Signed-off-by: Jason Kridner <jkridner@beagleboard.org> + +commit f904cdbb68167c647887f19929ad295dbaac8862 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Tue Jan 27 18:19:12 2009 +0100 + + OMAP3: Add common power code, README, and BeagleBoard + + Add BeagleBoard support, common power code and README. + + Signed-off-by: Jason Kridner <jkridner@beagleboard.org> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 9cda4f104b5313fadc21b75aa781c7a6aaf6ea60 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jan 28 08:31:10 2009 -0600 + + 85xx: Fix compile breakage with MPC8540EVAL + + Configuring for MPC8540EVAL board... + mpc8540eval.c: In function 'checkboard': + mpc8540eval.c:53: error: invalid operands to binary / + make[1]: *** [mpc8540eval.o] Error 1 + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 1a448db77b10153703bc5e4ad13dd55d88beb1d6 +Author: Bryan Wu <bryan.wu@analog.com> +Date: Sun Jan 18 23:04:27 2009 -0500 + + usb_scan_devices: fix output with no devices + + We should check the return of usb_new_device() so that if no USB device is + found, we print out the right message rather than always saying "new usb + device found". + + Signed-off-by: Bryan Wu <bryan.wu@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit f1c1f540243438246aefb703fdcf16957e3a72e1 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 22 10:11:21 2009 +0100 + + USB: Add high-speed (480Mb/s) to all USB related outputs + + With this patch the USB related connection speed output ("usb tree" command and + debug output) is now high-speed enabled. + + This patch also fixes a compilation warning when debugging is enabled. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit daa2dafb450a8073a4e42fd46cd4e995b208e4cb +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 21 17:12:19 2009 +0100 + + USB: Add dcache support to the EHCI driver + + This patch adds routines to handle (flush/invalidate) the dcache for the + QH and qTD structures and data buffers. This is needed on platforms using + this EHCI support with dcache enabled (like the MIPS VCT board port). + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 4e0ea0efc1e501186aca8577a4042fc6fa641602 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 21 17:12:28 2009 +0100 + + USB: Add EHCI support for VCT EHCI controller + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 832e61418eedfea172bd2fdfd0ea0d199cc70a9d +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 21 17:12:10 2009 +0100 + + USB: Add config option to call ehci_hcd_init() again after EHCI reset + + This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET + to call ehci_hcd_init() again after ehci_reset() is executed. This + is needed for the upcoming VCT EHCI support which needs to re-init + the hcd part again after the EHCI CMD_RESET is executed. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 597eb28bd9691266b7b804364cda577cdb51d106 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jan 21 17:12:01 2009 +0100 + + USB: Fix speed detection on EHCI cntr with root hub transaction translators + + This patch fixes an issue that the speed of USB devices was not detected + correctly on some EHCI controllers. This will be used on the upcoming VCT + EHCI support. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 20cc06611ea33fc0a67a5e56e6476379d2de3091 +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 09:41:20 2009 +0530 + + usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform + + Enabling USB MSC support for DM6446 (TI DaVinci) platform in the + configuration file. + + Signed-off-by: Ravi Babu <ravibabu@ti.com> + Signed-off-by: Swaminathan S <swami.iyer@ti.com> + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 538ef967715322f64ee08efa2296d9682111b014 +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 09:41:16 2009 +0530 + + usb : musb : Enabling DM6446 (TI DaVinci) USB module power + + Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level + controller hook up to USB core layer. + + Signed-off-by: Ravi Babu <ravibabu@ti.com> + Signed-off-by: Swaminathan S <swami.iyer@ti.com> + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit e142e9f35f8ec61e74bf8019428b003f5070c33b +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 09:41:13 2009 +0530 + + usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support + + Adding DM6446 (TI DaVinci) platform specific USB functionality for + USB Phy and VBUS initialization. + + Signed-off-by: Ravi Babu <ravibabu@ti.com> + Signed-off-by: Swaminathan S <swami.iyer@ti.com> + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit a9d39ebe91ecdd5ac0a0cf56ea162a19773db8da +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 09:41:09 2009 +0530 + + usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM + + Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci) + platform. + + Signed-off-by: Ravi Babu <ravibabu@ti.com> + Signed-off-by: Swaminathan S <swami.iyer@ti.com> + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit a142896934c755e679ba87e227a8e449f39b0012 +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 09:41:03 2009 +0530 + + usb : musb : Adding host controller driver for Mentor USB controller + + Adding Mentor USB core functionality and Mentor USB Host controller + functionality for Mentor USB OTG controller (musbhdrc). + + Signed-off-by: Ravi Babu <ravibabu@ti.com> + Signed-off-by: Swaminathan S <swami.iyer@ti.com> + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit c7d703f3f3c3d6b020bda4cf633f8a6167c3cd2a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Jan 1 18:27:27 2009 -0500 + + usb.h: use standard __LITTLE_ENDIAN from Linux headers + + Rather than forcing people to define a custom "LITTLEENDIAN", just use the + __LITTLE_ENDIAN one from the Linux byteorder headers that every arch is + already setting up. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 7b6e31eb17e3ff76238a60803fc531517d516223 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Dec 31 10:33:56 2008 +0100 + + USB ehci ixp4xx support + + Add USB ehci ixp4xx host controller. Test on ixdp465 board. + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 1ed9f9adc88218841dfeb60b9094a5a548bff009 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Dec 31 10:33:22 2008 +0100 + + USB ehci remove infinite loop and use handshake function + + USB ehci code cleanup. Use handshake instead of infinite while loop + to check the STD_ASS status + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 8fea2914ac974029b65926ef8247d908f84d202d +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Dec 31 10:32:41 2008 +0100 + + Add initial support for USB ehci pci + + Add USB ehci pci support. This patch doesn't include any + pci_ids and it is not tested on real hardware. + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 14e4111cdab7e7738ff6a203d445e4d8377f058f +Author: Bryan Wu <Bryan.Wu@analog.com> +Date: Thu Jan 1 19:48:07 2009 -0500 + + usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive + + The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive 000016244373FFB4 + does not like to be reset, so check for it. + + Signed-off-by: Bryan Wu <bryan.wu@analog.com> + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 1eb734fed3b79a5e6106dad16e88041894fdab30 +Author: Thomas Abraham <t-abraham@ti.com> +Date: Sun Jan 4 12:15:35 2009 +0530 + + usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure + + This patch populates the 'priv' field of the USB keyboard device_t + structure. The 'priv' field is populated with the address of the + 'struct usb_device' structure that represents the USB device. + + The 'priv' field can then be used in the 'usb_event_poll' function to + determine the USB device that requires to be polled. An + example of its usage in 'usb_event_poll' function is as below. + + device_t *dev; + struct usb_device *usb_kbd_dev; + + <snip> + + dev = device_get_by_name("usbkbd"); + usb_kbd_dev = (struct usb_device *)dev->priv; + iface = &usb_kbd_dev->config.if_desc[0]; + + Signed-off-by: Thomas Abraham <t-abraham@ti.com> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit 366523c26b6320af171459b19e6e0e9e3baa83ca +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Thu Dec 18 10:05:37 2008 +0100 + + USB change speed + + USB changes the speed according to the port status + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit c0d722fe7ee1cb452dfd9246419188b3f6d9c4df +Author: Remy Böhmer <linux@bohmer.net> +Date: Sat Dec 13 22:51:58 2008 +0100 + + EHCI fix code and ixp4xx test. + USB ehci configuration parameter: + + #define CONFIG_CMD_USB 1 + #define CONFIG_USB_STORAGE 1 + #define CONFIG_USB_EHCI + #define CONFIG_USB_EHCI_IXP4XX 1 + #define CONFIG_EHCI_IS_TDI 1 + #define CONFIG_EHCI_DESC_BIG_ENDIAN 1 + #define CONFIG_EHCI_MMIO_BIG_ENDIAN 1 + #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 + #define CONFIG_LEGACY_USB_INIT_SEQ 1 + + 2 USB Device(s) found + scanning bus for storage devices... 0 Storage Device(s) found + => usb tree + + Device Tree: + 1 Hub (1.5MBit/s, 0mA) + | u-boot EHCI Host Controller + | + |+-2 Mass Storage (12MBit/s, 100mA) + Sony Storage Media 0C07040930296 + + => + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit 51ab142b8b546d5e627b2c8c36d0adae222565f7 +Author: michael <michael@panicking.retis> +Date: Thu Dec 11 13:43:55 2008 +0100 + + [PATCH] This patch add varius fix to the ehci. + - fix ehci_readl, ehci_writel + - introduce new define in ehci.h + - introduce the handshake function for waiting on a register + - fix usb_ehci_fsl with the new HC_LENGTH macro + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit db63299b1dd2894ade542278210bccd046de6435 +Author: michael <michael@panicking.retis> +Date: Wed Dec 10 17:55:19 2008 +0100 + + [PATCH] Fix EHCI usb. I start to test on a + IXP465 board and I find some errors in the code. This + patch fix: + - descriptor initizialization (config, interface and endpoint + must be one next-to the other when the USB_DT_CONFIG message + is send. + - FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN + and the CONFIG_EHCI_MMIO_BIG_ENDIAN) + - Introduce the linux version of the usb_config_descriptor and + usb_interface descriptor. This descriptor does't contains + u-boot extension. + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit 6b92487dcf9afe83a3570153d66940fdb293be76 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Fri Nov 28 13:22:09 2008 +0100 + + USB ehci freescale support + + Add USB ehci freescale support + + Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit aaf098cfeed04595d4c5100ffd39095d79edbf90 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Fri Nov 28 13:20:46 2008 +0100 + + USB ehci core support + + Add USB ehci core support + + Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit 3e126484df7868e341545cce740b24b62b0cd3b7 +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Fri Nov 28 13:19:19 2008 +0100 + + Prepare USB layer for ehci + + Prepare USB layer for ehci support + + Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it> + Signed-off-by: Remy Böhmer <linux@bohmer.net> + +commit a0cb3fc31e58996a1c5732715ac04159d4d284fd +Author: Michael Trimarchi <trimarchi@gandalf.sssup.it> +Date: Wed Dec 10 15:52:06 2008 +0100 + + USB storage cleanup patch + + Cleanup usb storage + + Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit fe033ad6d0883063fe857237abb9436fab03208c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Oct 12 06:02:55 2008 -0400 + + Blackfin: fixup misc warnings such as printf's and missing casts + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 1f4a3bb50343719c434d7e2541a2f86480a6d25c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Oct 12 22:09:26 2008 -0400 + + Blackfin: convert old boards to use COBJS-y Makefile style + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 1f75d6f0ff005762d3e6ad92ae4ce2ab366b3bb5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 22:38:37 2008 -0400 + + Blackfin: bf533-stamp: rewrite resource swap logic + + The old swap function tended to clobber unrelated pins and screw up masks. + Rewrite the thing from scratch so it only uses the resources it needs. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 29d4ea0a9073c82469184331010136f52edf8db6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 22:08:42 2008 -0400 + + Blackfin: bootldr: implement BF53x/BF56x LDR loader + + The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of + arbitrary memory locations, so implement a basic one in software. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 8b35e3aeff6c2d747c37697997b3f8a808432329 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 22:05:42 2008 -0400 + + Blackfin: implement real write support for OTP + + Now that real documentation has been released for the OTP interface and + the on-chip ROM wrt writing/timings, implement support for reading/writing + as well as dumping/locking. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 9372c3214808fab545227d8d0f76b3bfcc6760ec +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 22:04:05 2008 -0400 + + Blackfin: update on-chip ROM API + + This brings the API for the on-chip ROM in line with the toolchain and + hardware documentation. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 7633903bff432ec7b27905dce7396958553f2be6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:52:17 2008 -0400 + + Blackfin: allow serial console to be disabled + + Some devices have no UART device pulled out, so allow people to disable the + driver completely in favor of other methods (like JTAG-console). + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 36ea8e9ad1107af12d244bba8c73e85b9f655e45 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:51:20 2008 -0400 + + Blackfin: support console-over-JTAG + + The Blackfin JTAG has the ability to pass data via a back-channel without + halting the processor. Utilize that channel to emulate a console. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit cf8f2efb5f39c5225da92391c14a07eecbeca881 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:49:06 2008 -0400 + + Blackfin: handle new anomalies with reset + + Workaround fun new anomalies related to software reset of the processor. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b1e9435b643043dd8fbd1fcc47309c6acb7b3c8e +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:44:00 2008 -0400 + + Blackfin: pass RETX to Linux + + Make sure we save the value of RETX at power on and then pass it on to the + kernel so that it can nicely debug a "double-fault-caused-a-reset" crash. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b5eba3fafcccd1979380f12a256bd0e19be3d61e +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:40:26 2008 -0400 + + Blackfin: clarify relocation comment during init + + People often ask questions about the init process and when things go + from flash to relocated base, so clarify the comments a bit. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 95433f6d43ede6b40c1d900f3f704c839aa074f1 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:23:41 2008 -0400 + + Blackfin: just set SP register directly during init + + No need to set the SP register indirectly to the configured value when it + can be set directly. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 51230e6e356ccf4c932e0c4ff54f1e49da02285c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 21:15:53 2008 -0400 + + Blackfin: add portmuxing for UARTs on the BF51x + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 4f6a313240c531042f16909a3a170ab047b95779 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Jun 1 01:26:29 2008 -0400 + + Blackfin: respect CONFIG_CLKIN_HALF + + As pointed out by Ivan Koryakovskiy, the initialization code was not + actually respecting the CONFIG_CLKIN_HALF option when configuring the + PLL_CTL register. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit dc2bfb0b58d7462b9eba68f3ae38e38cada0ad33 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sun Jun 1 01:21:34 2008 -0400 + + Blackfin: use common memcpy routine during init + + Rather than using a local custom memcpy function, just call the existing + optimized Blackfin version. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 362c943347364e9373af4c5530778491ab56ec2e +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Apr 9 02:27:06 2008 -0400 + + Blackfin: set default boot SPI CS for BF538/BF539 + + The BF538/BF539 use CS2 for booting off of rather than CS1 like newer + Blackfin parts. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 74dde80bd5d55bc146630853ca191aaeea7c30f4 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Apr 9 02:20:59 2008 -0400 + + Blackfin: punt unused BF533-STAMP definitions + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit fee531eeefc3b5f2c63c7fe27b9f55d924c59c26 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Fri Apr 18 20:44:11 2008 -0400 + + Blackfin: resurrect BF533-STAMP video splash driver + + This video driver used to live in the Blackfin cpu directory, but it was + lost during the unification process. This brings it back. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit a750d038f2548d846ea1e046d873dc932d041319 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Apr 9 02:31:29 2008 -0400 + + Blackfin: tighten up post memory coding style + + No functional changes here; just cleanup code style a bit. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 0649908f92c9bd214dd139aa3d4698c1654a45c6 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Wed Apr 9 02:29:18 2008 -0400 + + Blackfin: bf537-stamp nand: fix more style errors in previous commit + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 41f3325ae9add641036d7cb362e884b698e53f07 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 20:31:17 2008 -0400 + + Blackfin: drop dead/wrong debug code in initdram() + + The DEBUG code in initdram() is quite old and was never really useful, so + just drop it altogether. Common Blackfin debug code does a better job. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 65ba1abd3b90e0b2585745809b78e2651bd3bacb +Author: Mike Frysinger <vapier@gentoo.org> +Date: Sat Oct 11 20:30:28 2008 -0400 + + Blackfin: bf533-ezkit: shuffle flash defines a little + + Some of the flash defines weren't in the correct location and caused build + problems in some configurations, so let's move types and defines to better + local locations. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit be853bf86b41e91f4c422f0f56fdf87ea3191266 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 04:16:47 2008 -0400 + + Blackfin: overhaul i2c driver + + The current Blackfin i2c driver does not work properly with certain devices + due to it breaking up transfers incorrectly. This is a rewrite of the + driver and relocates it to the newer place in the source tree. + + Also remove duplicated I2C speed defines in Blackfin board configs and + disable I2C slave address usage since it isn't implemented. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit b6edc719a106ab7fa6e6950b4d97bc39c1368e45 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 04:00:07 2008 -0400 + + Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection + + Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of + 128kB when setting up the default flash protection region for U-Boot + itself. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 78a0ba7dc24c9682371f6ee8549b569fb573a329 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:57:39 2008 -0400 + + Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE + + When setting up the global data, rather than relying on sizeof(), use the + common CONFIG_SYS_GBL_DATA_SIZE define. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 01815c2d06c5b838f2cd536703e47bd2c9148194 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:52:24 2008 -0400 + + Blackfin: implement general support for CONFIG_STATUS_LED + + Here are the Blackfin-specific and board-independent pieces for status leds. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 6882b5a79a3247494b62c05015fa672557f1bfaa +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:49:32 2008 -0400 + + Blackfin: do not init i2c in Blackfin board init + + The common code takes care of calling i2c_init() when needed, so no point + in us doing it as well. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 1118ea73698eee6e72ef5cbfc00e41746040304f +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:42:20 2008 -0400 + + Blackfin: bfin_mac: update port muxing + + Adds support more Blackfin parts and fixes broken muxing for older ones. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 05b75e48832fc4afeecf8e76d704349557dffa35 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Mon Oct 6 03:35:44 2008 -0400 + + Blackfin: fix dcache handling when doing dma memcpy's + + Our dcache invalidate function doesn't just invalidate, it also flushes. + So rename the function accordingly and fix the dma_memcpy() function so it + doesn't inadvertently corrupt the data destination. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 68e5632494168095d75f120af70043b68afd2476 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 18:56:56 2008 -0400 + + Blackfin: dont generate ldrs with --force + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 746290dfd86a70b41fc5fdd3df1424a647d5c5e8 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 18:55:30 2008 -0400 + + Blackfin: pass --bmode/--initcode when creating ldr + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 0332e4df71fccf9a96c5a4393e3c5d5daa50880a +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 18:39:27 2008 -0400 + + Blackfin: minimize time cache is turned off when replacing cplb entries + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 21d631360430cf0ae9099612273cd4de28911ba9 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:31:13 2008 -0400 + + Blackfin: split cache handling out of dma_memcpy() + + Creating a new dma_memcpy() function that skips all cache checks allows us + to use the function in very early init where the cache is not yet setup. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit d31eb38512bed377d5d4b3c696662e52120a2e4c +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:30:49 2008 -0400 + + Blackfin: abort dma_memcpy() for L1 scratchpad + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 81b799add709177e838466461f7b9989488b0fd5 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:27:52 2008 -0400 + + Blackfin: rename bootm.c to boot.c + + The boot file contains functions for more than just "bootm", so rename it + accordingly. + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit d7ca7dd5bfc418ac173e9d2712f6cc2d8147a091 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:22:37 2008 -0400 + + Blackfin: set more sane default board config values + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 36cd52a00794fb15ffab05d640acca92d7482993 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 15:24:59 2008 -0400 + + Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE} + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit c8054bc12e00669bd7588f2b30fef48aa94babac +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:21:27 2008 -0400 + + Blackfin: add bit defines for DDR parts + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 154502fe0796f3b7a4698378c5d2080ae28a9782 +Author: Mike Frysinger <vapier@gentoo.org> +Date: Thu Aug 7 13:21:11 2008 -0400 + + Blackfin: add defines to describe active bootrom behavior + + Signed-off-by: Mike Frysinger <vapier@gentoo.org> + +commit 2b6fd5c77db9c6ed3cea9799c86ff922cf0107b2 +Author: Kim Phillips <kim.phillips@freescale.com> +Date: Tue Jan 27 16:03:53 2009 -0600 + + mpc83xx: fix undefined reference to `flush_cache' error in simpc8313 build + + extend commit c70564e6b1bd08f3230182392238907f3531a87e + "NAND: Fix cache and memory inconsistency issue" to add the cache.o dependency + to the simpc8313 build and fix this: + + ...Large Page NAND...Configuring for SIMPC8313 board... + nand_boot_fsl_elbc.o: In function `nand_boot': + nand_spl/board/sheldon/simpc8313/nand_boot_fsl_elbc.c:150: undefined reference to `flush_cache' + make[1]: *** [/home/r1aaha/git/u-boot-mpc83xx/nand_spl/u-boot-spl] Error 1 + make: *** [nand_spl] Error 2 + + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 54a7cc4912feefa45be961cc47cc159563725d2f +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 28 09:25:31 2009 +0100 + + mpc8536ds.c: include sata.h to for needed function prototypes + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 2fb2604d5c20beb061b0a94282b7f6eb14d00cb8 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Jan 27 18:03:12 2009 -0600 + + Command usage cleanup + + Remove command name from all command "usage" fields and update + common/command.c to display "name - usage" instead of + just "usage". Also remove newlines from command usage fields. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 79621bc10ba8b8c45d348994aba5b9e4923cb77b +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Jan 27 18:03:11 2009 -0600 + + amcc: Clean up command usage output + + Update taihu and taishan commands to use cmd_usage() function + to display usage messages. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 62c3ae7c6ef215b1afa614abdf61acf077752207 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Jan 27 18:03:10 2009 -0600 + + Standardize command usage messages with cmd_usage() + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 84cde2bb409c07c6ef36a192d194359d4e9ccd70 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Jan 27 18:03:09 2009 -0600 + + pcs440ep: Clean up led command definition + + The pcs440ep's led command usage formatting is non-standard. It + was made standard in preparation for larger command usage updates. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 9507e7867e04dc48c80ee333c2a9a5e70e887f62 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Jan 27 18:03:08 2009 -0600 + + Clean up diufb command definitions + + The diufb command usage formatting is non-standard. It was + made standard in preparation for larger command usage updates. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + +commit 6450a8485836fc80615ae6de6a864c33369b44f5 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jan 28 00:29:26 2009 +0100 + + Update CHANGELOG, tiny coding style cleanup. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit cf7e399fb35b3aea90a27d1df72f45f5d6156204 Author: Mike Frysinger <vapier@gentoo.org> Date: Tue Jan 27 16:12:21 2009 -0500 @@ -169,6 +2368,18 @@ Date: Wed Jan 21 17:20:20 2009 +0100 Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> +commit de832a99414ff06a4b2cdc9f5280b387da039834 +Author: Stefan Roese <sr@denx.de> +Date: Mon Jan 26 10:05:20 2009 +0100 + + nand_spl: Fix compile problem with board_nand_init() prototype + + This patch removes the now obsolete and additionally wrongly defined + board_nand_init() prototype from nand_spl/nand_boot.c. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Scott Wood <scottwood@freescale.com> + commit e8eac437189430d8e04a5d254ed92c58bc534a79 Author: Richard Retanubun <RichardRetanubun@RuggedCom.com> Date: Wed Jan 14 08:44:26 2009 -0500 @@ -255,6 +2466,178 @@ Date: Tue Dec 9 11:00:07 2008 +0100 Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de> +commit 71a040f4f556cca4d30f06805d82e717b3ef1020 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Fri Nov 21 12:06:26 2008 +0900 + + sh: sh7763rdp: Update sh7763rdp config + + Add CONFIG_NET_MULTI in config file, because sh_eth changed new newwork API. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 +Author: Gary Jennejohn <garyj@denx.de> +Date: Thu Nov 20 12:28:38 2008 +0100 + + mgcoge make ether_scc.c work with CONFIG_NET_MULTI + + This change is needed for mgcoge because it uses two ethernet drivers. + + Add a check for the presence of the PIGGY board on mgcoge. Without this + board networking cannot work and the initialization must be aborted. + + Only allocate rtx once to prevent DPRAM exhaustion. + + Initialize ether_scc.c and the keymile-specific HDLC driver (to be added + soon) in eth.c. + + Signed-off-by: Gary Jennejohn <garyj@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit bd3980cc095af1728b994cdd8bf1ac430b6289e6 +Author: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +Date: Fri Nov 21 12:04:18 2008 +0900 + + sh: sh_eth: Change new network API + + sh_eth used old network API. This patch changed new API. + + Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 890a02e8ee6b8c26a6e3e505e1a2d29cd73aa6f6 +Author: Stefan Roese <sr@denx.de> +Date: Wed Nov 12 13:31:02 2008 +0100 + + net: smc911x: Make register read/write functions weak + + This patch changes the reg_read/_write to smc911x_reg_read/_write + and defines then as weak so that they can be overridden by board + specific version. + + This will be used by the upcoming VCTH board support. + + Signed-off-by: Stefan Roese <sr@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit 8b69b563039989885969d24465c56f8ac4c07c4c +Author: Heiko Schocher <hs@denx.de> +Date: Thu Nov 20 09:57:14 2008 +0100 + + powerpc: net: support for the SMSC LAN8700 PHY + + Signed-off-by: Heiko Schocher <hs@denx.de> + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + +commit d5254f149da9e6cd649d887b042ce577ef3ba78d +Author: Alessandro Rubini <rubini@unipv.it> +Date: Sat Jan 24 18:10:37 2009 +0100 + + Initial support for Nomadik 8815 development board + + The NMDK8815 board is distributed by ST Microelectornics. + Other (proprietary) code must be run to unlock the CPU before + U-Boot runs. doc/README.nmdk8815 outlines the boot sequence. + + This is the initial port, with basic infrastructure and + a working serial port. + + Signed-off-by: Alessandro Rubini <rubini@unipv.it> + Acked-by: Andrea Gallo <andrea.gallo@stnwireless.com> + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 7d264c1ef267cfc8d928bc8577a7cc907f2f5e47 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:18 2008 +0100 + + OMAP3: Add I2C support + + Add I2C support. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit b1c3bf99fb477675d464aeadb5dd69d2cbc9dc7b +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:17 2008 +0100 + + OMAP3: Add MMC support + + Add MMC support. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 12201a13547ec22ddcdae278e74465e54a3be60c +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:16 2008 +0100 + + OMAP3: Add NAND support + + Add NAND support. + + Signed-off-by: Nishanth Menon <nm@ti.com> + Signed-off-by: Syed Mohammed Khasim <khasim@ti.com> + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 91eee546737ae21d930af479530997174c342b13 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:15 2008 +0100 + + OMAP3: Add common board, interrupt and system info + + Add common board, interrupt and system info code. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 5ed3e8659e5373f6a229877ac506c0b00a054fb8 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:14 2008 +0100 + + OMAP3: Add common clock, memory and low level code + + Add common clock, memory and low level code + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 0b02b184003e6a5023e05d5f31de54db279b1431 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:13 2008 +0100 + + OMAP3: Add common cpu and start code + + Add common cpu and start code. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit a8b6450546cd507d331b8fde384791d84bde5651 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:12 2008 +0100 + + OMAP3: Add OMAP3, memory and function prototype headers + + Add OMAP3, memory and function prototype header files for OMAP3. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 2c803210a464abbac35752ca1c737514360b4c32 +Author: Dirk Behme <dirk.behme@googlemail.com> +Date: Sun Dec 14 09:47:11 2008 +0100 + + OMAP3: Add pin mux, clock and cpu headers + + Add pin mux, clock and cpu header files for OMAP3. + + Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> + +commit 685533646f4ff17a84ec9265cabb60af325b6e1f +Author: Maxim Artamonov <scn1874@yandex.ru> +Date: Wed Dec 3 05:38:17 2008 +0300 + + bugfix for i.mx31 CCM_UPCTL reg + + Signed-off-by: Maxim Artamonov <scn1874 at yandex.ru> + commit 24113a44ed5cd3257a0237c3961e121812fca6db Author: Mike Frysinger <vapier@gentoo.org> Date: Tue Dec 30 03:15:38 2008 -0500 @@ -2500,6 +4883,15 @@ Date: Tue Dec 9 23:20:18 2008 -0500 Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> +commit 4cd8ed40615a7d741ef2f09ee53779ec6907b8a6 +Author: Ben Warren <biggerbadderben@gmail.com> +Date: Tue Dec 9 23:26:31 2008 -0800 + + Fix compile error in building MBX860T. + Bug was introduced in 9eb79bd8856bcab896ed5e1f1bca159807a124dd + + Signed-off-by: Ben Warren <biggerbadderben@gmail.com> + commit 97a24a78ee6f34b89b821cb70eda1cf34aa11d97 Author: Jerry Van Baren <gvb.uboot@gmail.com> Date: Mon Nov 24 08:15:02 2008 -0500 |