diff options
Diffstat (limited to 'CHANGELOG')
-rw-r--r-- | CHANGELOG | 247 |
1 files changed, 238 insertions, 9 deletions
diff --git a/CHANGELOG b/CHANGELOG index eb4df4d282f..160437605ba 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -5,18 +5,238 @@ Changes since U-Boot 1.1.4: * VoiceBlue update: use new MTD flash partitioning methods, use more reasonable TEXT_BASE, update default environment and enable keyed autoboot. - Patch from Ladislav Michl, 16. Aug 2005 + Patch by Ladislav Michl, 16. Aug 2005 * Add forgotten changes for the PLEB 2 Board. - Patch from David Snowdon, 13. Aug 2005 + Patch by David Snowdon, 13. Aug 2005 + +* Add support for wrPPMC7xx/74xx boards + Patch by Richard Danter, 12 Aug 2005 + +* Add support for gth2 board + Patch by Thomas Lange, Aug 11 2005 + +* Add support for CONFIG_SERIAL_MULTI on MPC5xxx + Patch by Martin Krause, 8 Jun 2006 + + This patch supports two serial consoles on boards with + a MPC5xxx CPU. The console can be switched at runtime + by setting stdin, stdout and stderr to the desired serial + interface (serial0 or serial1). The PSCs to be used as + console port are definded by CONFIG_PSC_CONSOLE + and CONFIG_PSC_CONSOLE2. + See README.serial_multi for details. + +* Bugfix in I2C initialisation on S3C2400. + If the bus is blocked because of a previously interrupted + transfer, up to eleven clocks are generated on the I2CSCL + line to complete the transfer and to free the bus. + With this fix pin I2CSCL (PG6) is really configured as GPIO + so the clock pulses are really generated. + Patch by Martin Krause, 04 Apr 2006 + +* Fix DDR6 errata on TQM834x boards + Patch by Thomas Waehner, 07 Mar 2006 + +* Remove obsolete flash driver board/tqm5200/flash.c + Patch by Martin Krause, 11 Jan 2006 + +* Update configuration for CMC-PU2 board + Patch by Martin Krause, 17 Nov 2005 + +* Add support for PS/2 keyboard on TQM85xx board + Patch by Martin Krause, 07 Nov 2005 + + Tested on a STK85XX baseboard. Make sure the PS/2 controller + has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 + +* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation + In tsc2000_read_channel() the delay after setting the multiplexer + to a temperature channel is increased from 1,5 ms to 10 ms. This + is to allow the multiplexer inputs to stabilize after huge steps + of the input signal level. + Patch by Martin Krause, 08 Nov 2005 + +* Adjust TQM5200 make targets + Make the automatic CS configuration the default. + The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB + and CONFIG_TQM5200_AC are removed. + "TQM5200_config" is now the default for STK52XX.200 base boards. + On a STK52XX.100 base board "TQM5200_STK100_config" must be used. + Patch by Martin Krause, 07 Nov 2005 + +* Fix setting of environment variable "ver" on trab board + The environment variable "ver" is now set before + do_auto_update() is called, so that "ver" can be used + in USB update scripts. + Patch by Martin Krause, 27 Oct 2005 + +* Fix wrong usage of udelay() in led_blink() on trab board + Patch by Martin Krause, 27 Oct 2005 + +* Fix udelay bug in vfd.c for trab board + Patch by Martin Krause, 27 Oct 2005 + +* Disable JFFS2 support for trab board + Patch by Martin Krause, 27 Oct 2005 + +* Change mtdparts definition on trab board to match current flash map + Patch by Martin Krause, 27 Oct 2005 + +* Fix memory init problems on MCC200 board + +* Fix IxEthDB.h to compile again + Patch by Stefan Roese, 14 Jun 2006 + +* Minor cleanup for PCS440EP board + Patch by Stefan Roese, 13 Jun 2006 + +* Add MCF5282 support (without preloader) + relocate ichache_State to ram + u-boot can run from internal flash + Add EB+MCF-EV123 board support. + Add m68k Boards to MAKEALL + Patch from Jens Scharsig, 08 Aug 2005 + +* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards + Patch by Scott McNutt, 08 Jun 2006 + +* Nios II - Add EPCS Controller bootrom work-around + -When booting from an epcs controller, the epcs bootrom may leave the + slave select in an asserted state causing soft reset hang. This + patch ensures slave select is negated at reset. + Patch by Scott McNutt, 08 Jun 2006 + +* Update PK1C20 board + -Update base addresses for standard configuration + -Eliminate use of CACHE_BYPASS in board code + Patch by Scott McNutt, 08 Jun 2006 + +* Nios II - Fix I/O Macros and mini-app stubs + -Fix asm/io.h macros + -Eliminate use of CACHE_BYPASS in cpu code + -Eliminate assembler warnings + -Fix mini-app stubs and force no small data + Patch by Scott McNutt, 08 Jun 2006 + +* Fix U-Boot environment sector protection on MCC200 board + +* Minor cleanup for PCS440EP board + +* Update PCS440EP port to fit into one flash device (incl. environment) + Patch by Stefan Roese, 06 Jun 2006 + +* Add support for PCS440EP board + Patch by Stefan Roese, 02 Jun 2006 + +* Fix examples/Makefile; some build targets were lost + +* Fix watchdog handling in CFI flash driver + Just use udelay() when waiting for status changes which will + implicitely trigger the watchdog. + +* Fix PCI to memory window size problems on PM82x boards + We use the "automatic" mode that was used for the MPC8266ADS and + MPC8272 boards. Eventually this should be used on all boards?] + Patch by Wolfgang Grandegger, 17 Jan 2006 + +* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone + Patch by Stefan Roese, 29 May 2006 + +* Update Intel IXP4xx support + - Add IXP4xx NPE ethernet MAC support + - Add support for Intel IXDPG425 board + - Add support for Prodrive PDNB3 board + - Add IRQ support + Patch by Stefan Roese, 23 May 2006 + +* Fix problem in PVR detection for 440GR + Patch by Stefan Roese, 18 May 2006 + +* Fix gcc 3.4.x AFLAGS setting for m68k platform. + +* Enable autoboot for M5271EVB board. + +* Changed default ramdisk addr in yosemite/yellowstone ports + Patch by Stefan Roese, 15 May 2006 + +* Fix PCMCIA support on virtlab2 + +* Add support for VirtLab2 board + (needed because of differences in the PCMCIA hardware). + +* Minor cleanup. + +* Update yosemite configuration to enable flash write buffer support + Patch by Stefan Roese, 10 May 2006 + +* Fix compile warnings in common/xyzModem.c + Patch by Stefan Roese, 10 May 2006 + +* Add support for AMCC 440EP Rev C and 440GR Rev B + Patch by John Otken, 08 May 2006 + +* OMAP 5912/OSK: update EMIFS CS1 timings: + Problems have been seen in the linux kernel's smc91x network driver + due to improper bus timings. The latest 2.6 OMAP kernels currently + have a workaround, but this fix belongs in u-boot. + Patch by Kevin Hilman, 13 Oct 2005 + +* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports + Patch by Hiroki Kaminaga, 11 Mar 2006 + +* Update omap5912osk board support + - Fix OMAP support that omap5912osk compiles in current source tree + - Update with code from "http://omap.spectrumdigital.com/osk5912" + to fix problems with DDR initialization + - Fix timer setup + - Use CFI flash driver and support complete 32MB of onboard flash + - Add "print_cpuinfo()" and "checkboard()" functions to display + CPU (with frequency) and Board infos + Patch by Stefan Roese, 10 May 2006 + +* Fix watchdog issues for ColdFire boards. + +* Add M5271EVB board support. + +* Make R5200 specific low level initialization board conditional. + +* Update CPU target identification strings for ColdFire family. + +* Update register definitions for MCF5271. + +* Fix serial console support for MCF5271. + +* Fixes for gcc 3.4 based m68k toolchain, + based on patch by Jate Sujjavanich. + +* Fix lowboot support on MCC200 board + +* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port: + - Removed MPC8349ADS port + - Added PCI support to MPC8349ADS + - reworked memory map to allow mapping of all regions with BATs + Patch by Kumar Gala, 20 Apr 2006 + +* Coding Style cleanup + +* Write RTC seconds first to maintain settings integrity per + Maxim/Dallas DS1306 data sheet. + Patch by Alan J. Luse, 02 May 2006 + +* Scheduled for removal: strnicmp() which is unused + +* Update for Intel Monahans boards: + - support for magic key detection and handling on delta board + - NAND support for zylonite board + some minor cleanup * Declare load_serial_ymodem() when using CFG_CMD_LOADB. - Patch by Jon Loeliger, 01. May 2006 + Patch by Jon Loeliger, 01 May 2006 * Fixed handling of bad checksums with "mkimage -l" * Added support for BC3450 board - Patch by Stefan Strobl, 21. Oct 2005 + Patch by Stefan Strobl, 21 Oct 2005 * Update for NC650 board: - Support rev1 and rev2 hardware @@ -482,6 +702,15 @@ Changes since U-Boot 1.1.4: PMC405 and CPCI2DP: Added firmware download and booting via pci. Patch by Matthias Fuchs, 20 Dec 2005 +* Add ColdFire targets to MAKEALL script + Patch by Zachary Landau, 26 Jan 2006 + +* Add support for r5200 board + Patch by Zachary Landau, 26 Jan 2006 + +* Add support for Freescale M5271 processor + Patch by Zachary Landau, 26 Jan 2006 + * Fix 28F256J3A support on PM520 board (without bank-switching only 32 MB can be accessed) @@ -1779,7 +2008,7 @@ Changes for U-Boot 1.1.3: - use -mtune=xscale and -march=armv5 options for PXA * Patch by Florian Schlote, 08 Sep 2004: - Add support for SenTec-COBRA5272-board (Coldfire). + Add support for SenTec-COBRA5272-board (ColdFire). * Patch by Gleb Natapov, 07 Sep 2004: mpc824x: set PCI latency timer to a sane value @@ -1837,7 +2066,7 @@ Changes for U-Boot 1.1.2: * Patch by Stefan Roese, 16 Dez 2004: - ext2fs support added - Tundra universe support added - - Coldfire MCF5249 support added (no preloader needed!) + - ColdFire MCF5249 support added (no preloader needed!) - MCF5249 board TASREG added - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405, VOM405, WUH405 @@ -2159,7 +2388,7 @@ Changes for U-Boot 1.1.2: * Fix NSCU config; add ethernet wakeup code. -* Add link for preloader for Motorola Coldfire to README.m68k +* Add link for preloader for Motorola ColdFire to README.m68k * Patch by Michael Bendzick, 12 Jul 2004: fix output formatting in drivers/cfi_flash.c @@ -3106,7 +3335,7 @@ Changes for U-Boot 1.1.0: * Some code cleanup * Patch by Josef Baumgartner, 10 Feb 2004: - Fixes for Coldfire port + Fixes for ColdFire port * Patch by Brad Kemp, 11 Feb 2004: Fix CFI flash driver problems @@ -3372,7 +3601,7 @@ Changes for U-Boot 1.0.1: - 4xx: removed spurious MII error messages on "mii info" command. * Patch by Bernhard Kuhn, 28 Nov 2003: - add support for Coldfire CPU + add support for ColdFire CPU add support for Motorola M5272C3 and M5282EVB boards * Patch by Pierre Aubert, 24 Nov 2003: |