diff options
-rw-r--r-- | board/freescale/p1_p2_rdb/Makefile | 21 | ||||
-rw-r--r-- | board/freescale/p1_p2_rdb/ddr.c | 16 | ||||
-rw-r--r-- | board/freescale/p1_p2_rdb/spl.c | 141 | ||||
-rw-r--r-- | board/freescale/p1_p2_rdb/spl_minimal.c | 84 | ||||
-rw-r--r-- | board/freescale/p1_p2_rdb/tlb.c | 18 | ||||
-rw-r--r-- | include/configs/P1_P2_RDB.h | 265 | ||||
-rw-r--r-- | nand_spl/board/freescale/p1_p2_rdb/Makefile | 91 | ||||
-rw-r--r-- | nand_spl/board/freescale/p1_p2_rdb/nand_boot.c | 82 |
8 files changed, 450 insertions, 268 deletions
diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile index f7b568a0216..a97bf45f00f 100644 --- a/board/freescale/p1_p2_rdb/Makefile +++ b/board/freescale/p1_p2_rdb/Makefile @@ -4,8 +4,27 @@ # SPDX-License-Identifier: GPL-2.0+ # +MINIMAL= + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +ifdef MINIMAL + +obj-y += spl_minimal.o tlb.o law.o + +else +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +else obj-y += p1_p2_rdb.o +obj-$(CONFIG_PCI) += pci.o +endif obj-y += ddr.o obj-y += law.o -obj-$(CONFIG_PCI) += pci.o obj-y += tlb.o + +endif diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 17d3beac390..98ee5f10215 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -180,27 +180,22 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { phys_size_t fixed_sdram (void) { - char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; size_t ddr_size; struct cpu_type *cpu; ulong ddr_freq, ddr_freq_mhz; cpu = gd->arch.cpu; - /* P1020 and it's derivatives support max 32bit DDR width */ - if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) { - ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); - } else { - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - } + + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + #if defined(CONFIG_SYS_RAMBOOT) return ddr_size; #endif ddr_freq = get_ddr_freq(0); ddr_freq_mhz = ddr_freq / 1000000; - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, ddr_freq)); + printf("Configuring DDR for %ld T/s data rate\n", ddr_freq); if(ddr_freq_mhz <= 400) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs)); @@ -211,8 +206,7 @@ phys_size_t fixed_sdram (void) else if(ddr_freq_mhz <= 800) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs)); else - panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, ddr_freq)); + panic("Unsupported DDR data rate %ld T/s\n", ddr_freq); /* P1020 and it's derivatives support max 32bit DDR width */ if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) { diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c new file mode 100644 index 00000000000..f30c5fe3e6d --- /dev/null +++ b/board/freescale/p1_p2_rdb/spl.c @@ -0,0 +1,141 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 + +#define SYSCLK_66 66666666 +#define SYSCLK_100 100000000 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val_gpdat, sysclk_gpio; + + val_gpdat = in_be32(&pgpio->gpdat); + sysclk_gpio = val_gpdat & SYSCLK_MASK; + + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + + return 0; +} + +phys_size_t get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio, bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); + setbits_be32(&gur->pmuxcr, + in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + +#ifdef CONFIG_SPL_SPI_BOOT + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = bus_clk; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_SPI_BOOT + spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif + + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("Tertiary program loader running in sram..."); +#else + puts("Second program loader running in sram...\n"); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1_p2_rdb/spl_minimal.c b/board/freescale/p1_p2_rdb/spl_minimal.c new file mode 100644 index 00000000000..96a4d1cb0ae --- /dev/null +++ b/board/freescale/p1_p2_rdb/spl_minimal.c @@ -0,0 +1,84 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <asm/io.h> +#include <nand.h> +#include <linux/compiler.h> +#include <asm/fsl_law.h> +#include <fsl_ddr_sdram.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 + +#define SYSCLK_66 66666666 +#define SYSCLK_100 100000000 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val_gpdat, sysclk_gpio; + + val_gpdat = in_be32(&pgpio->gpdat); + sysclk_gpio = val_gpdat & SYSCLK_MASK; + + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + + return 0; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + gd->bus_clk / 16 / CONFIG_BAUDRATE); + + puts("\nNAND boot... "); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + puts("\nSecond program loader running in sram..."); + nand_boot(); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); + + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c index bc98972e332..73f5729ef56 100644 --- a/board/freescale/p1_p2_rdb/tlb.c +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -37,6 +37,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), +#ifndef CONFIG_SPL_BUILD /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, @@ -55,6 +56,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 4, BOOKE_PAGESZ_256K, 1), #endif /* #if defined(CONFIG_PCI) */ +#endif /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -65,7 +67,21 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1), +#if CONFIG_SYS_L2_SIZE >= (256 << 10) + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_256K, 1), +#endif +#endif + +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_1G, 1) diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 0f040672583..110ba5f325d 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -20,39 +20,119 @@ #ifdef CONFIG_P1011RDB #define CONFIG_P1011 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P1020RDB #define CONFIG_P1020 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P2010RDB #define CONFIG_P2010 +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_P2020RDB #define CONFIG_P2020 -#endif - -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (129 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif +#endif + +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 4096 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif /* not CONFIG_TPL_BUILD */ + +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -64,8 +144,12 @@ #endif #ifndef CONFIG_SYS_MONITOR_BASE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif +#endif /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ @@ -120,22 +204,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x1fffffff #define CONFIG_PANIC_HANG /* do not reset board on panic */ - /* - * Config the L2 Cache as L2 SRAM - */ +/* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) +#if defined(CONFIG_P2020RDB) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) +#else +#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) +#endif +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif /* CONFIG_TPL_BUILD */ +#endif #endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#if defined(CONFIG_NAND_SPL) +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif @@ -146,7 +253,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR size on P1_P2 RDBs */ +#if defined(CONFIG_P1011RDB) || defined(CONFIG_P1020RDB) +/* + * P1020 and it's derivatives support max 32bit DDR width + * So Reduce available DDR size +*/ +#define CONFIG_SYS_SDRAM_SIZE 512 +#else +#define CONFIG_SYS_SDRAM_SIZE 1024 +#endif #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -201,14 +316,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ - defined(CONFIG_RAMBOOT_SPIFLASH) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else -#undef CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -241,21 +348,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE 0xff800000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull #else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#endif #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} @@ -264,15 +362,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - /* NAND flash config */ #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ @@ -288,7 +377,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND +#ifdef CONFIG_NAND #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ @@ -323,7 +412,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -490,33 +579,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_OFFSET ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_RAMBOOT_SDCARD) +#ifdef CONFIG_SPIFLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_IN_SPI_FLASH - #define CONFIG_ENV_SPI_BUS 0 - #define CONFIG_ENV_SPI_CS 0 - #define CONFIG_ENV_SPI_MAX_HZ 10000000 - #define CONFIG_ENV_SPI_MODE 0 - #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ - #define CONFIG_ENV_SECT_SIZE 0x10000 - #define CONFIG_ENV_SIZE 0x2000 -#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (512 * 0x800) +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#elif defined(CONFIG_SYS_RAMBOOT) +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif + #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile deleted file mode 100644 index 9f338024ea2..00000000000 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2009-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c deleted file mode 100644 index f7e8438438e..00000000000 --- a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <mpc85xx.h> -#include <asm/io.h> -#include <ns16550.h> -#include <nand.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_law.h> - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 -#define BOARDREV_C 0x00100000 - -#define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 -#define SYSCLK_100 100000000 - -DECLARE_GLOBAL_DATA_PTR; - -void board_init_f(ulong bootflag) -{ - uint plat_ratio, bus_clk, sys_clk = 0; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - uint val, temp, sysclk_mask; - - val = pgpio->gpdat; - sysclk_mask = val & SYSCLK_MASK; - temp = val & BOARDREV_MASK; - if (temp == BOARDREV_C) { - if(sysclk_mask == 0) - sys_clk = SYSCLK_66; - else - sys_clk = SYSCLK_100; - } else if (temp == BOARDREV_B) { - if(sysclk_mask == 0) - sys_clk = SYSCLK_66; - else - sys_clk = SYSCLK_50; - } - - plat_ratio = gur->porpllsr & 0x0000003e; - plat_ratio >>= 1; - bus_clk = plat_ratio * sys_clk; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to DDR and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} |