summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG11
-rw-r--r--CREDITS2
-rw-r--r--Makefile16
-rw-r--r--board/cpc45/cpc45.c152
-rw-r--r--board/cpc45/flash.c311
-rw-r--r--board/lpd7a40x/flash.c2
-rw-r--r--board/mx1ads/Makefile48
-rw-r--r--board/mx1ads/config.mk49
-rw-r--r--board/mx1ads/memsetup.S9
-rw-r--r--board/mx1ads/mx1ads.c41
-rw-r--r--board/mx1ads/syncflash.c46
-rw-r--r--board/mx1ads/u-boot.lds2
-rw-r--r--board/pm520/flash.c25
-rw-r--r--board/pm520/mt46v16m16-75.h37
-rw-r--r--board/pm520/mt48lc16m16a2-75.h43
-rw-r--r--board/pm520/pm520.c284
-rw-r--r--common/env_nand.c2
-rw-r--r--cpu/mc9328/Makefile2
-rw-r--r--cpu/mc9328/interrupts.c3
-rw-r--r--cpu/mc9328/serial.c27
-rw-r--r--include/configs/CPC45.h404
-rw-r--r--include/configs/PM520.h154
-rw-r--r--include/configs/RPXlite_DW.h2
-rw-r--r--include/configs/Sandpoint8245.h2
-rw-r--r--include/configs/mx1ads.h24
-rw-r--r--include/mc9328.h1402
26 files changed, 1712 insertions, 1388 deletions
diff --git a/CHANGELOG b/CHANGELOG
index f923382e17f..de109410cd2 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,12 +2,21 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Josef Wagner, 04 Jun 2004:
+ - DDR Ram support for PM520 (MPC5200)
+ - support for different flash types (PM520)
+ - USB / IDE / CF-Card / DiskOnChip support for PM520
+ - 8 bit boot rom support for PM520/CE520
+ - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
+ - I2C and RTC support for CPC45
+ - support of new flash type (28F160C3T) for CPC45
+
* Fix flash parameters passed to Linux for PPChameleon board
* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
* Patch by Paul Ruhland, 10 Jun 2004:
- fix support for Logic SDK-LH7A404 board and clean up the
+ fix support for Logic SDK-LH7A404 board and clean up the
LH7A404 register macros.
* Patch by Matthew McClintock, 10 Jun 2004:
diff --git a/CREDITS b/CREDITS
index 8f0057c09d5..dcd29067242 100644
--- a/CREDITS
+++ b/CREDITS
@@ -362,7 +362,7 @@ D: Port to MPC555/556 microcontrollers and support for cmi board
N: Ming-Len Wu
E: minglen_wu@techware.com.tw
-D: Motorola MX1ADS board support
+D: Motorola MX1ADS board support
W: http://www.techware.com.tw/
N: Xianghua Xiao
diff --git a/Makefile b/Makefile
index 7fcf064e52e..d8b8c7bd5f6 100644
--- a/Makefile
+++ b/Makefile
@@ -255,8 +255,20 @@ TOP5200_config: unconfig
@ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
-PM520_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xxx pm520
+PM520_config \
+PM520_DDR_config \
+PM520_ROMBOOT_config \
+PM520_ROMBOOT_DDR_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring DDR,$@)" ] || \
+ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ echo "... DDR memory revision" ; \
+ }
+ @[ -z "$(findstring ROMBOOT,$@)" ] || \
+ { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ echo "... booting from 8-bit flash" ; \
+ }
+ @./mkconfig -a PM520 ppc mpc5xxx pm520
#########################################################################
## MPC8xx Systems
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index ad69245827a..92ccd42e7f7 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -25,6 +25,7 @@
#include <mpc824x.h>
#include <asm/processor.h>
#include <pci.h>
+#include <i2c.h>
int sysControlDisplay(int digit, uchar ascii_code);
extern void Plx9030Init(void);
@@ -58,46 +59,134 @@ int checkboard(void)
return 0;
}
-long int initdram(int board_type)
+long int initdram (int board_type)
{
- long size;
- long new_bank0_end;
- long mear1;
- long emear1;
-
- size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
-
- new_bank0_end = size - 1;
- mear1 = mpc824x_mpc107_getreg(MEAR1);
- emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
- emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
-
- return (size);
+ int m, row, col, bank, i, ref;
+ unsigned long start, end;
+ uint32_t mccr1, mccr2;
+ uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
+ uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
+ uint8_t mber = 0;
+ unsigned int tmp;
+
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ if (i2c_reg_read (0x50, 2) != 0x04)
+ return 0; /* Memory type */
+
+ m = i2c_reg_read (0x50, 5); /* # of physical banks */
+ row = i2c_reg_read (0x50, 3); /* # of rows */
+ col = i2c_reg_read (0x50, 4); /* # of columns */
+ bank = i2c_reg_read (0x50, 17); /* # of logical banks */
+ ref = i2c_reg_read (0x50, 12); /* refresh rate / type */
+
+ CONFIG_READ_WORD(MCCR1, mccr1);
+ mccr1 &= 0xffff0000;
+
+ CONFIG_READ_WORD(MCCR2, mccr2);
+ mccr2 &= 0xffff0000;
+
+ start = CFG_SDRAM_BASE;
+ end = start + (1 << (col + row + 3) ) * bank - 1;
+
+ for (i = 0; i < m; i++) {
+ mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
+ if (i < 4) {
+ msar1 |= ((start >> 20) & 0xff) << i * 8;
+ emsar1 |= ((start >> 28) & 0xff) << i * 8;
+ mear1 |= ((end >> 20) & 0xff) << i * 8;
+ emear1 |= ((end >> 28) & 0xff) << i * 8;
+ } else {
+ msar2 |= ((start >> 20) & 0xff) << (i-4) * 8;
+ emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
+ mear2 |= ((end >> 20) & 0xff) << (i-4) * 8;
+ emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
+ }
+ mber |= 1 << i;
+ start += (1 << (col + row + 3) ) * bank;
+ end += (1 << (col + row + 3) ) * bank;
+ }
+ for (; i < 8; i++) {
+ if (i < 4) {
+ msar1 |= 0xff << i * 8;
+ emsar1 |= 0x30 << i * 8;
+ mear1 |= 0xff << i * 8;
+ emear1 |= 0x30 << i * 8;
+ } else {
+ msar2 |= 0xff << (i-4) * 8;
+ emsar2 |= 0x30 << (i-4) * 8;
+ mear2 |= 0xff << (i-4) * 8;
+ emear2 |= 0x30 << (i-4) * 8;
+ }
+ }
+
+ switch(ref) {
+ case 0x00:
+ case 0x80:
+ tmp = get_bus_freq(0) / 1000000 * 15625 / 1000 - 22;
+ break;
+ case 0x01:
+ case 0x81:
+ tmp = get_bus_freq(0) / 1000000 * 3900 / 1000 - 22;
+ break;
+ case 0x02:
+ case 0x82:
+ tmp = get_bus_freq(0) / 1000000 * 7800 / 1000 - 22;
+ break;
+ case 0x03:
+ case 0x83:
+ tmp = get_bus_freq(0) / 1000000 * 31300 / 1000 - 22;
+ break;
+ case 0x04:
+ case 0x84:
+ tmp = get_bus_freq(0) / 1000000 * 62500 / 1000 - 22;
+ break;
+ case 0x05:
+ case 0x85:
+ tmp = get_bus_freq(0) / 1000000 * 125000 / 1000 - 22;
+ break;
+ default:
+ tmp = 0x512;
+ break;
+ }
+
+ CONFIG_WRITE_WORD(MCCR1, mccr1);
+ CONFIG_WRITE_WORD(MCCR2, tmp << MCCR2_REFINT_SHIFT);
+ CONFIG_WRITE_WORD(MSAR1, msar1);
+ CONFIG_WRITE_WORD(EMSAR1, emsar1);
+ CONFIG_WRITE_WORD(MEAR1, mear1);
+ CONFIG_WRITE_WORD(EMEAR1, emear1);
+ CONFIG_WRITE_WORD(MSAR2, msar2);
+ CONFIG_WRITE_WORD(EMSAR2, emsar2);
+ CONFIG_WRITE_WORD(MEAR2, mear2);
+ CONFIG_WRITE_WORD(EMEAR2, emear2);
+ CONFIG_WRITE_BYTE(MBER, mber);
+
+ return (1 << (col + row + 3) ) * bank * m;
}
+
/*
* Initialize PCI Devices, report devices found.
*/
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_sandpoint_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+static struct pci_config_table pci_cpc45_config_table[] = {
+#ifndef CONFIG_PCI_PNP
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0F, PCI_ANY_ID,
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0D, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
+ PCI_PLX9030_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+#endif /*CONFIG_PCI_PNP*/
{ }
};
-#endif
-
struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
- config_table: pci_sandpoint_config_table,
+ config_table: pci_cpc45_config_table,
#endif
};
@@ -108,6 +197,9 @@ void pci_init_board(void)
/* init PCI_to_LOCAL Bus BRIDGE */
Plx9030Init();
+ /* Clear Display */
+ DISP_CWORD = 0x0;
+
sysControlDisplay(0,' ');
sysControlDisplay(1,'C');
sysControlDisplay(2,'P');
@@ -130,16 +222,14 @@ void pci_init_board(void)
* RETURNS: NA
*/
-int sysControlDisplay
- (
- int digit, /* number of digit 0..7 */
- uchar ascii_code /* ASCII code */
- )
+int sysControlDisplay (int digit, /* number of digit 0..7 */
+ uchar ascii_code /* ASCII code */
+ )
{
if ((digit < 0) || (digit > 7))
return (-1);
- *((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code;
+ *((volatile uchar *) (DISP_CHR_RAM + digit)) = ascii_code;
return (0);
}
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
index 904923543d9..37dd182ba4d 100644
--- a/board/cpc45/flash.c
+++ b/board/cpc45/flash.c
@@ -41,12 +41,12 @@
#define MAIN_SECT_SIZE 0x40000
#define PARAM_SECT_SIZE 0x8000
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-static int write_data (flash_info_t *info, ulong dest, ulong *data);
-static void write_via_fpu(vu_long *addr, ulong *data);
-static __inline__ unsigned long get_msr(void);
-static __inline__ void set_msr(unsigned long msr);
+static int write_data (flash_info_t * info, ulong dest, ulong * data);
+static void write_via_fpu (vu_long * addr, ulong * data);
+static __inline__ unsigned long get_msr (void);
+static __inline__ void set_msr (unsigned long msr);
/*---------------------------------------------------------------------*/
#undef DEBUG_FLASH
@@ -62,102 +62,132 @@ static __inline__ void set_msr(unsigned long msr);
/*-----------------------------------------------------------------------
*/
-unsigned long flash_init(void)
+unsigned long flash_init (void)
{
- int i, j;
- ulong size = 0;
- uchar tempChar;
+ int i, j;
+ ulong size = 0;
+ uchar tempChar;
+ vu_long *tmpaddr;
- /* Enable flash writes on CPC45 */
+ /* Enable flash writes on CPC45 */
- tempChar = BOARD_CTRL;
+ tempChar = BOARD_CTRL;
- tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
+ tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
- tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
+ tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
- BOARD_CTRL = tempChar;
+ BOARD_CTRL = tempChar;
+ __asm__ volatile ("sync\n eieio");
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
- vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ vu_long *addr = (vu_long *) (CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
- addr[0] = 0x00900090;
+ addr[0] = 0x00900090;
- DEBUGF ("Flash bank # %d:\n"
- "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
- "\tDevice ID @ 0x%08lX: 0x%08lX\n",
- i,
- (ulong)(&addr[0]), addr[0],
- (ulong)(&addr[2]), addr[2]);
+ __asm__ volatile ("sync\n eieio");
+ udelay (100);
- if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
- (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T))
- {
+ DEBUGF ("Flash bank # %d:\n"
+ "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
+ "\tDevice ID @ 0x%08lX: 0x%08lX\n",
+ i,
+ (ulong) (&addr[0]), addr[0],
+ (ulong) (&addr[2]), addr[2]);
- flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
- (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
- } else {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- addr[0] = 0xFFFFFFFF;
- goto Done;
- }
+ if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
+ (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T)) {
- DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+ flash_info[i].flash_id =
+ (FLASH_MAN_INTEL & FLASH_VENDMASK) |
+ (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
- addr[0] = 0xFFFFFFFF;
+ } else if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT)
+ && (addr[2] == addr[3])
+ && (addr[2] == INTEL_ID_28F160C3T)) {
+
+ flash_info[i].flash_id =
+ (FLASH_MAN_INTEL & FLASH_VENDMASK) |
+ (INTEL_ID_28F160C3T & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j > 30) {
- flash_info[i].start[j] = CFG_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- (MAIN_SECT_SIZE * 31) + (j - 31) * PARAM_SECT_SIZE;
} else {
- flash_info[i].start[j] = CFG_FLASH_BASE +
- i * FLASH_BANK_SIZE +
- j * MAIN_SECT_SIZE;
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ addr[0] = 0xFFFFFFFF;
+ goto Done;
+ }
+
+ DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+
+ addr[0] = 0xFFFFFFFF;
+
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ if (j > 30) {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ (MAIN_SECT_SIZE * 31) + (j -
+ 31) *
+ PARAM_SECT_SIZE;
+ } else {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ j * MAIN_SECT_SIZE;
+ }
+ }
+
+ /* unlock sectors, if 160C3T */
+
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ tmpaddr = (vu_long *) flash_info[i].start[j];
+
+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+ (INTEL_ID_28F160C3T & FLASH_TYPEMASK)) {
+ tmpaddr[0] = 0x00600060;
+ tmpaddr[0] = 0x00D000D0;
+ tmpaddr[1] = 0x00600060;
+ tmpaddr[1] = 0x00D000D0;
+ }
}
+
+ size += flash_info[i].size;
+
+ addr[0] = 0x00FF00FF;
+ addr[1] = 0x00FF00FF;
}
- size += flash_info[i].size;
- }
- /* Protect monitor and environment sectors
- */
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* Protect monitor and environment sectors
+ */
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[1]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[1]);
#else
- flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-#endif
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + monitor_flash_len - 1,
+ &flash_info[0]);
#endif
#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[1]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[1]);
#else
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
#endif
#endif
Done:
- return size;
+ return size;
}
/*-----------------------------------------------------------------------
@@ -179,6 +209,11 @@ void flash_print_info (flash_info_t * info)
case (INTEL_ID_28F160F3T & FLASH_TYPEMASK):
printf ("28F160F3T (16Mbit)\n");
break;
+
+ case (INTEL_ID_28F160C3T & FLASH_TYPEMASK):
+ printf ("28F160C3T (16Mbit)\n");
+ break;
+
default:
printf ("Unknown Chip Type 0x%04x\n", i);
goto Done;
@@ -186,7 +221,7 @@ void flash_print_info (flash_info_t * info)
}
printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
+ info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
@@ -194,7 +229,7 @@ void flash_print_info (flash_info_t * info)
printf ("\n ");
}
printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
@@ -205,7 +240,7 @@ Done:
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, prot, sect;
ulong start, now, last;
@@ -229,33 +264,32 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
}
prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
+ for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
start = get_timer (0);
- last = start;
+ last = start;
/* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
+ for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *)(info->start[sect]);
+ vu_long *addr = (vu_long *) (info->start[sect]);
DEBUGF ("Erase sect %d @ 0x%08lX\n",
- sect, (ulong)addr);
+ sect, (ulong) addr);
/* Disable interrupts which might cause a timeout
* here.
*/
- flag = disable_interrupts();
+ flag = disable_interrupts ();
addr[0] = 0x00500050; /* clear status register */
addr[0] = 0x00200020; /* erase setup */
@@ -267,23 +301,23 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080) ) {
- if ((now=get_timer(start)) >
- CFG_FLASH_ERASE_TOUT) {
+ ((addr[1] & 0x00800080) != 0x00800080)) {
+ if ((now = get_timer (start)) >
+ CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
- addr[0] = 0x00B000B0; /* suspend erase */
- addr[0] = 0x00FF00FF; /* to read mode */
+ addr[0] = 0x00B000B0; /* suspend erase */
+ addr[0] = 0x00FF00FF; /* to read mode */
return 1;
}
/* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
+ if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
@@ -306,7 +340,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
#define FLASH_WIDTH 8 /* flash bus width in bytes */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong wp, cp, msr;
int l, rc, i;
@@ -315,16 +349,16 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
ulong *datal = &data[1];
DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
- addr, (ulong)src, cnt);
+ addr, (ulong) src, cnt);
if (info->flash_id == FLASH_UNKNOWN) {
return 4;
}
- msr = get_msr();
- set_msr(msr | MSR_FP);
+ msr = get_msr ();
+ set_msr (msr | MSR_FP);
- wp = (addr & ~(FLASH_WIDTH-1)); /* get lower aligned address */
+ wp = (addr & ~(FLASH_WIDTH - 1)); /* get lower aligned address */
/*
* handle unaligned start bytes
@@ -335,39 +369,35 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
for (i = 0, cp = wp; i < l; i++, cp++) {
if (i >= 4) {
*datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
+ ((*datal & 0xFF000000) >> 24);
}
- *datal = (*datal << 8) | (*(uchar *)cp);
+ *datal = (*datal << 8) | (*(uchar *) cp);
}
for (; i < FLASH_WIDTH && cnt > 0; ++i) {
- char tmp;
-
- tmp = *src;
-
- src++;
+ char tmp = *src++;
if (i >= 4) {
*datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
+ ((*datal & 0xFF000000) >> 24);
}
*datal = (*datal << 8) | tmp;
-
- --cnt; ++cp;
+ --cnt;
+ ++cp;
}
for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
if (i >= 4) {
*datah = (*datah << 8) |
- ((*datal & 0xFF000000) >> 24);
+ ((*datal & 0xFF000000) >> 24);
}
- *datal = (*datah << 8) | (*(uchar *)cp);
+ *datal = (*datah << 8) | (*(uchar *) cp);
}
- if ((rc = write_data(info, wp, data)) != 0) {
- set_msr(msr);
+ if ((rc = write_data (info, wp, data)) != 0) {
+ set_msr (msr);
return (rc);
}
@@ -378,19 +408,19 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* handle FLASH_WIDTH aligned part
*/
while (cnt >= FLASH_WIDTH) {
- *datah = *(ulong *)src;
- *datal = *(ulong *)(src + 4);
- if ((rc = write_data(info, wp, data)) != 0) {
- set_msr(msr);
+ *datah = *(ulong *) src;
+ *datal = *(ulong *) (src + 4);
+ if ((rc = write_data (info, wp, data)) != 0) {
+ set_msr (msr);
return (rc);
}
- wp += FLASH_WIDTH;
+ wp += FLASH_WIDTH;
cnt -= FLASH_WIDTH;
src += FLASH_WIDTH;
}
if (cnt == 0) {
- set_msr(msr);
+ set_msr (msr);
return (0);
}
@@ -399,31 +429,28 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
*/
*datah = *datal = 0;
for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
- char tmp;
-
- tmp = *src;
-
- src++;
+ char tmp = *src++;
if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >>
+ 24);
}
*datal = (*datal << 8) | tmp;
-
--cnt;
}
for (; i < FLASH_WIDTH; ++i, ++cp) {
if (i >= 4) {
- *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >>
+ 24);
}
- *datal = (*datal << 8) | (*(uchar *)cp);
+ *datal = (*datal << 8) | (*(uchar *) cp);
}
- rc = write_data(info, wp, data);
- set_msr(msr);
+ rc = write_data (info, wp, data);
+ set_msr (msr);
return (rc);
}
@@ -434,32 +461,32 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
* 1 - write timeout
* 2 - Flash not erased
*/
-static int write_data (flash_info_t *info, ulong dest, ulong *data)
+static int write_data (flash_info_t * info, ulong dest, ulong * data)
{
- vu_long *addr = (vu_long *)dest;
+ vu_long *addr = (vu_long *) dest;
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if (((addr[0] & data[0]) != data[0]) ||
- ((addr[1] & data[1]) != data[1]) ) {
+ ((addr[1] & data[1]) != data[1])) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
+ flag = disable_interrupts ();
- addr[0] = 0x00400040; /* write setup */
- write_via_fpu(addr, data);
+ addr[0] = 0x00400040; /* write setup */
+ write_via_fpu (addr, data);
/* re-enable interrupts if necessary */
if (flag)
- enable_interrupts();
+ enable_interrupts ();
start = get_timer (0);
while (((addr[0] & 0x00800080) != 0x00800080) ||
- ((addr[1] & 0x00800080) != 0x00800080) ) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ ((addr[1] & 0x00800080) != 0x00800080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
addr[0] = 0x00FF00FF; /* restore read mode */
return (1);
}
@@ -472,22 +499,24 @@ static int write_data (flash_info_t *info, ulong dest, ulong *data)
/*-----------------------------------------------------------------------
*/
-static void write_via_fpu(vu_long *addr, ulong *data)
+static void write_via_fpu (vu_long * addr, ulong * data)
{
- __asm__ __volatile__ ("lfd 1, 0(%0)" : : "r" (data));
- __asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
+ __asm__ __volatile__ ("lfd 1, 0(%0)"::"r" (data));
+ __asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
}
+
/*-----------------------------------------------------------------------
*/
-static __inline__ unsigned long get_msr(void)
+static __inline__ unsigned long get_msr (void)
{
- unsigned long msr;
+ unsigned long msr;
+
+ __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
- __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
- return msr;
+ return msr;
}
-static __inline__ void set_msr(unsigned long msr)
+static __inline__ void set_msr (unsigned long msr)
{
- __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+ __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
}
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
index 26a9ce45702..7b8e0141fe7 100644
--- a/board/lpd7a40x/flash.c
+++ b/board/lpd7a40x/flash.c
@@ -300,7 +300,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
do {
ulong now;
/* check timeout */
- //if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ /*if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { */
if ((now = get_timer(tstart)) > CFG_FLASH_ERASE_TOUT) {
printf("tstart = 0x%08lx, now = 0x%08lx\n", tstart, now);
*addr = CMD_STATUS_RESET;
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
index 8a17702d0be..72f850d9cec 100644
--- a/board/mx1ads/Makefile
+++ b/board/mx1ads/Makefile
@@ -1,28 +1,26 @@
-#/*
-#* board/mx1ads/Makefile
-#*
-#* (c) Copyright 2004
-#* Techware Information Technology, Inc.
-#* http://www.techware.com.tw/
-#*
-#* Ming-Len Wu <minglen_wu@techware.com.tw>
-#*
-#* This program is free software; you can redistribute it and/or
-#* modify it under the terms of the GNU General Public License as
-#* published by the Free Software Foundation; either version 2 of
-#* the License, or (at your option) any later version.
-#*
-#* This program is distributed in the hope that it will be useful,
-#* but WITHOUT ANY WARRANTY; without even the implied warranty of
-#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#* GNU General Public License for more details.
-#*
-#* You should have received a copy of the GNU General Public License
-#* along with this program; if not, write to the Free Software
-#* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-#* MA 02111-1307 USA
-#*/
-
+#
+# board/mx1ads/Makefile
+#
+# (c) Copyright 2004
+# Techware Information Technology, Inc.
+# http://www.techware.com.tw/
+#
+# Ming-Len Wu <minglen_wu@techware.com.tw>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
include $(TOPDIR)/config.mk
diff --git a/board/mx1ads/config.mk b/board/mx1ads/config.mk
index 16a0b84b2e9..f6ac40d34a6 100644
--- a/board/mx1ads/config.mk
+++ b/board/mx1ads/config.mk
@@ -1,28 +1,25 @@
-#/*
-#* board/mx1ads/config.mk
-#*
-#* (c) Copyright 2004
-#* Techware Information Technology, Inc.
-#* http://www.techware.com.tw/
-#*
-#* Ming-Len Wu <minglen_wu@techware.com.tw>
-#*
-#* This program is free software; you can redistribute it and/or
-#* modify it under the terms of the GNU General Public License as
-#* published by the Free Software Foundation; either version 2 of
-#* the License, or (at your option) any later version.
-#*
-#* This program is distributed in the hope that it will be useful,
-#* but WITHOUT ANY WARRANTY; without even the implied warranty of
-#* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#* GNU General Public License for more details.
-#*
-#* You should have received a copy of the GNU General Public License
-#* along with this program; if not, write to the Free Software
-#* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-#* MA 02111-1307 USA
-#*/
-
+#
+# board/mx1ads/config.mk
+#
+# (c) Copyright 2004
+# Techware Information Technology, Inc.
+# http://www.techware.com.tw/
+#
+# Ming-Len Wu <minglen_wu@techware.com.tw>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
TEXT_BASE = 0x08400000
-
diff --git a/board/mx1ads/memsetup.S b/board/mx1ads/memsetup.S
index 39b71fefe4e..1b06fa3c4d4 100644
--- a/board/mx1ads/memsetup.S
+++ b/board/mx1ads/memsetup.S
@@ -1,6 +1,6 @@
/*
* board/mx1ads/memsetup.S
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -49,7 +49,7 @@ memsetup:
/* Issue Precharge All Commad */
ldr r3, =0x8200000
ldr r2, [r3]
-
+
/* Set AutoRefresh Command */
ldr r3, =0xA2120200
str r3, [r1]
@@ -64,11 +64,11 @@ memsetup:
ldr r2, [r3]
ldr r2, [r3]
ldr r2, [r3]
-
+
/* Set Mode Register */
ldr r3, =0xB2120200
str r3, [r1]
-
+
/* Issue Mode Register Command */
ldr r3, =0x08111800 /* Mode Register Value */
ldr r2, [r3]
@@ -79,4 +79,3 @@ memsetup:
/* everything is fine now */
mov pc, lr
-
diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c
index 567f88a7b2f..453e4bb0a0c 100644
--- a/board/mx1ads/mx1ads.c
+++ b/board/mx1ads/mx1ads.c
@@ -1,6 +1,6 @@
/*
* board/mx1ads/mx1ads.c
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -61,7 +61,7 @@ static inline void delay (unsigned long loops) {
"bne 1b":"=r" (loops):"0" (loops));
}
-#endif
+#endif
/*
* Miscellaneous platform dependent initialisations
@@ -76,7 +76,7 @@ void SetAsynchMode(void) {
"mcr p15,0,r0,c1,c0,0 \n"
);
}
-
+
static u32 mc9328sid;
int board_init (void) {
@@ -88,16 +88,13 @@ int board_init (void) {
mc9328sid = MX1_SIDR;
MX1_GPCR = 0x000003AB; /* I/O pad driving strength */
-
+
/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
/* MX1_CS1L = 0x11110601; */
-
MX1_MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
-/* MX1_MPCTL0 = 0x003f1437; *//* setting for 192 MHz MCU PLL CLK */
-
-
+/* MX1_MPCTL0 = 0x003f1437; */ /* setting for 192 MHz MCU PLL CLK */
/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
* BCLK divider to 2 (i.e. BCLK to 48 MHz)
@@ -108,13 +105,13 @@ int board_init (void) {
MX1_CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
/* setup cs4 for cs8900 ethernet */
-
+
MX1_CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
MX1_CS4L = 0x00001501;
-
+
MX1_GIUS_A &= 0xFF3FFFFF;
MX1_GPR_A &= 0xFF3FFFFF;
-
+
tmp = *(unsigned int *)(0x1500000C);
tmp = *(unsigned int *)(0x1500000C);
@@ -135,9 +132,9 @@ int board_init (void) {
/* set PERCLKs */
MX1_PCDR = 0x00000055; /* set PERCLKS */
-
-/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
- * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
+
+/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
+ * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
* all sources selected as normal interrupt
*/
MX1_INTTYPEH = 0;
@@ -154,24 +151,24 @@ int board_late_init(void) {
switch (mc9328sid) {
case 0x0005901d :
- printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid);
+ printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid);
break;
case 0x04d4c01d :
- printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid);
+ printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid);
break;
case 0x00d4c01d :
- printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid);
+ printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid);
break;
default :
- printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
+ printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid);
break;
-
+
}
-
+
return 0;
-}
-
+}
+
int dram_init (void) {
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/mx1ads/syncflash.c b/board/mx1ads/syncflash.c
index fc1d7f6ce29..09fc0f86e45 100644
--- a/board/mx1ads/syncflash.c
+++ b/board/mx1ads/syncflash.c
@@ -1,6 +1,6 @@
/*
* board/mx1ads/syncflash.c
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -61,7 +61,7 @@ u32 SF_SR(void) {
reg_SFCTL = CMD_PROGRAM;
tmp = __REG(CFG_FLASH_BASE);
-
+
reg_SFCTL = CMD_NORMAL;
reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
@@ -97,7 +97,7 @@ void SF_PrechargeAll(void) {
u32 tmp;
reg_SFCTL = CMD_PREC; /* Set Precharge Command */
- tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
+ tmp = __REG(CFG_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
}
@@ -105,7 +105,7 @@ void SF_PrechargeAll(void) {
void SF_Normal(void) {
SF_PrechargeAll();
-
+
reg_SFCTL = CMD_NORMAL;
}
@@ -118,10 +118,10 @@ void SF_Erase(u32 RowAddress) {
reg_SFCTL = CMD_PREC;
tmp = __REG(RowAddress);
-
+
reg_SFCTL = CMD_LCR; /* Set LCR mode */
__REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
-
+
reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
__REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
@@ -134,7 +134,7 @@ void SF_NvmodeErase(void) {
reg_SFCTL = CMD_LCR; /* Set to LCR mode */
__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */
-
+
reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
__REG(CFG_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
@@ -146,7 +146,7 @@ void SF_NvmodeWrite(void) {
reg_SFCTL = CMD_LCR; /* Set to LCR mode */
__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */
-
+
reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
__REG(CFG_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
@@ -168,11 +168,11 @@ ulong flash_init(void) {
tmp = __REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
SF_Normal();
-
+
i = 0;
flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
-
+
flash_info[i].size = FLASH_BANK_SIZE;
flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
@@ -181,7 +181,7 @@ ulong flash_init(void) {
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = CFG_FLASH_BASE + j * 0x00100000;
}
-
+
flash_protect(FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + monitor_flash_len - 1,
@@ -208,8 +208,8 @@ void flash_print_info (flash_info_t *info) {
printf("Unknown Vendor ");
break;
}
-
-
+
+
switch (info->flash_id & FLASH_TYPEMASK) {
case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
@@ -226,13 +226,13 @@ void flash_print_info (flash_info_t *info) {
printf(" Sector Start Addresses: ");
for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0)
+ if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
-
+
printf ("\n");
}
@@ -248,19 +248,19 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) {
if (info->flash_id == FLASH_UNKNOWN)
return ERR_UNKNOWN_FLASH_TYPE;
- if ((s_first < 0) || (s_first > s_last))
+ if ((s_first < 0) || (s_first > s_last))
return ERR_INVAL;
- if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
+ if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
return ERR_UNKNOWN_FLASH_VENDOR;
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect])
+ if (info->protect[sect])
prot++;
}
-
+
if (prot) {
printf("protected!\n");
return ERR_PROTECTED;
@@ -279,7 +279,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) {
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
-
+
printf("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
@@ -307,8 +307,6 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) {
return rc;
}
-
-
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
@@ -316,7 +314,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) {
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
int i;
- for(i = 0; i < cnt; i += 4) {
+ for(i = 0; i < cnt; i += 4) {
SF_PrechargeAll();
@@ -327,6 +325,6 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
}
SF_Normal();
-
+
return ERR_OK;
}
diff --git a/board/mx1ads/u-boot.lds b/board/mx1ads/u-boot.lds
index 946994d507a..53743cdb80e 100644
--- a/board/mx1ads/u-boot.lds
+++ b/board/mx1ads/u-boot.lds
@@ -1,6 +1,6 @@
/*
* board/mx1ads/u-boot.lds
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
diff --git a/board/pm520/flash.c b/board/pm520/flash.c
index 4ea8b364639..572cc9bbeb0 100644
--- a/board/pm520/flash.c
+++ b/board/pm520/flash.c
@@ -83,12 +83,18 @@ unsigned long flash_init (void)
{
int i;
ulong size = 0;
+ extern void flash_preinit(void);
+ extern void flash_afterinit(ulong, ulong);
+ ulong flashbase = CFG_FLASH_BASE;
+
+ flash_preinit();
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
- flash_get_size ((FPW *) CFG_FLASH_BASE, &flash_info[i]);
- flash_get_offsets (CFG_FLASH_BASE, &flash_info[i]);
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+ flash_get_size ((FPW *) flashbase, &flash_info[i]);
+ flash_get_offsets (flash_info[i].start[0], &flash_info[i]);
break;
default:
panic ("configured to many flash banks!\n");
@@ -99,14 +105,22 @@ unsigned long flash_init (void)
/* Protect monitor and environment sectors
*/
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#ifndef CONFIG_BOOT_ROM
flash_protect ( FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0] );
+#endif
+#endif
+#ifdef CFG_ENV_IS_IN_FLASH
flash_protect ( FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+#endif
+
+ flash_afterinit(flash_info[0].start[0], flash_info[0].size);
return size;
}
@@ -195,6 +209,8 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
addr[0x5555] = (FPW) 0x00900090;
mb ();
+ udelay(100);
+
value = addr[0];
switch (value) {
@@ -220,18 +236,21 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x02000000;
+ info->start[0] = CFG_FLASH_BASE;
break; /* => 32 MB */
case (FPW) INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x01000000;
+ info->start[0] = CFG_FLASH_BASE + 0x01000000;
break; /* => 16 MB */
case (FPW) INTEL_ID_28F320J3A:
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
- info->size = 0x00800000;
+ info->size = 0x800000;
+ info->start[0] = CFG_FLASH_BASE + 0x01800000;
break; /* => 8 MB */
default:
diff --git a/board/pm520/mt46v16m16-75.h b/board/pm520/mt46v16m16-75.h
new file mode 100644
index 00000000000..f650faaa109
--- /dev/null
+++ b/board/pm520/mt46v16m16-75.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x714f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/pm520/mt48lc16m16a2-75.h b/board/pm520/mt48lc16m16a2-75.h
new file mode 100644
index 00000000000..ffdf0396a54
--- /dev/null
+++ b/board/pm520/mt48lc16m16a2-75.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 0 /* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE 0x008D0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xC2222600
+#define SDRAM_CONFIG2 0x88B70004
+#define SDRAM_ADDRSEL 0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index bb0268f48b2..54f59f59a7f 100644
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -25,127 +28,209 @@
#include <mpc5xxx.h>
#include <pci.h>
-#ifndef CFG_RAMBOOT
-static long int dram_size(long int *base, long int maxsize)
-{
- volatile long int *addr;
- ulong cnt, val;
- ulong save[32]; /* to make test non-destructive */
- unsigned char i = 0;
-
- for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save[i++] = *addr;
- *addr = ~cnt;
- }
-
- /* write 0 to base address */
- addr = base;
- save[i] = *addr;
- *addr = 0;
-
- /* check at base address */
- if ((val = *addr) != 0) {
- *addr = save[i];
- return (0);
- }
-
- for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- val = *addr;
- *addr = save[--i];
-
- if (val != (~cnt)) {
- return (cnt * sizeof (long));
- }
- }
- return (maxsize);
-}
+#if defined(CONFIG_MPC5200_DDR)
+#include "mt46v16m16-75.h"
+#else
+#include "mt48lc16m16a2-75.h"
+#endif
+#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
/* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0000 | hi_addr_bit;
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
/* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
- /* set mode register */
-#if defined(CONFIG_MPC5200)
- *(vu_long *)MPC5XXX_SDRAM_MODE = 0x408d0000;
-#elif defined(CONFIG_MGT5100)
- *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ __asm__ volatile ("sync");
#endif
+
/* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0002 | hi_addr_bit;
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
/* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = 0xd04f0004 | hi_addr_bit;
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
/* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = 0x008d0000;
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ __asm__ volatile ("sync");
+
/* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = 0x504f0000 | hi_addr_bit;
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ __asm__ volatile ("sync");
}
#endif
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
long int initdram (int board_type)
{
ulong dramsize = 0;
+ ulong dramsize2 = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
- /* configure SDRAM start/end */
-#if defined(CONFIG_MPC5200)
+ /* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+ __asm__ volatile ("sync");
/* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2233a00;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ /* let SDRAM CS1 start right after CS0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+ /* find RAM size using SDRAM CS1 only */
+ sdram_start(0);
+ test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize2 = test1;
+ } else {
+ dramsize2 = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize2 < (1 << 20)) {
+ dramsize2 = 0;
+ }
+
+ /* set SDRAM CS1 size according to the amount of RAM found */
+ if (dramsize2 > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+ | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ }
+
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+ return dramsize + dramsize2;
+}
#elif defined(CONFIG_MGT5100)
+
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup and enable SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+ __asm__ volatile ("sync");
/* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0xc2222600;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x88b70004;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
/* address select register */
- *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000;
-#endif
+ *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
+ __asm__ volatile ("sync");
+
+ /* find RAM size */
sdram_start(0);
- test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
} else {
dramsize = test2;
}
-#if defined(CONFIG_MPC5200)
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG =
- (0x13 + __builtin_ffs(dramsize >> 20) - 1);
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#elif defined(CONFIG_MGT5100)
+
+ /* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-#endif
-#else
-#ifdef CONFIG_MGT5100
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+#else /* CFG_RAMBOOT */
+
+ /* Retrieve amount of SDRAM available */
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-#else
- dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20);
-#endif
+
#endif /* CFG_RAMBOOT */
- /* return total ram size */
+
return dramsize;
}
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
+
int checkboard (void)
{
#if defined(CONFIG_MPC5200)
@@ -171,14 +256,32 @@ void flash_preinit(void)
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
-void flash_afterinit(ulong size)
+void flash_afterinit(ulong start, ulong size)
{
- if (size == 0x800000) { /* adjust mapping */
- *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
- START_REG(CFG_BOOTCS_START | size);
- *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
- STOP_REG(CFG_BOOTCS_START | size, size);
- }
+#if defined(CONFIG_BOOT_ROM)
+ /* adjust mapping */
+ *(vu_long *)MPC5XXX_CS1_START =
+ START_REG(start);
+ *(vu_long *)MPC5XXX_CS1_STOP =
+ STOP_REG(start, size);
+#else
+ /* adjust mapping */
+ *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
+ START_REG(start);
+ *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
+ STOP_REG(start, size);
+#endif
+}
+
+
+extern flash_info_t flash_info[]; /* info for FLASH chips */
+
+int misc_init_r (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ /* adjust flash start */
+ gd->bd->bi_flashstart = flash_info[0].start[0];
+ return (0);
}
#ifdef CONFIG_PCI
@@ -191,3 +294,26 @@ void pci_init_board(void)
pci_mpc5xxx_init(&hose);
}
#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+ debug ("init_ide_reset\n");
+
+}
+
+void ide_set_reset (int idereset)
+{
+ debug ("ide_reset(%d)\n", idereset);
+
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+#if (CONFIG_COMMANDS & CFG_CMD_DOC)
+extern void doc_probe (ulong physadr);
+void doc_init (void)
+{
+ doc_probe (CFG_DOC_BASE);
+}
+#endif
diff --git a/common/env_nand.c b/common/env_nand.c
index 2412b109d7d..516aed7326d 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -78,7 +78,7 @@ char * env_name_spec = "NAND";
extern uchar environment[];
env_t *env_ptr = (env_t *)(&environment[0]);
#else /* ! ENV_IS_EMBEDDED */
-env_t *env_ptr = 0; //(env_t *)CFG_ENV_ADDR;
+env_t *env_ptr = 0;
#endif /* ENV_IS_EMBEDDED */
diff --git a/cpu/mc9328/Makefile b/cpu/mc9328/Makefile
index 0261ba6e7bf..fccc6ab9123 100644
--- a/cpu/mc9328/Makefile
+++ b/cpu/mc9328/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+OBJS = serial.o interrupts.o cpu.o
all: .depend $(START) $(LIB)
diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c
index 3a922cfc4f4..2407db609fe 100644
--- a/cpu/mc9328/interrupts.c
+++ b/cpu/mc9328/interrupts.c
@@ -243,8 +243,7 @@ unsigned long long get_ticks(void)
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
-
+
ulong get_tbclk (void) {
return CFG_HZ;
}
-
diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
index 45b6f8afd43..8dcfb80274c 100644
--- a/cpu/mc9328/serial.c
+++ b/cpu/mc9328/serial.c
@@ -1,6 +1,6 @@
/*
- * cpu/mc9328/serial.c
- *
+ * cpu/mc9328/serial.c
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -23,11 +23,10 @@
* MA 02111-1307 USA
*/
-
#include <common.h>
#include <mc9328.h>
-#if defined(CONFIG_UART1)
+#if defined(CONFIG_UART1)
/* GPIO PORT B */
#define reg_GIUS MX1_GIUS_C
@@ -35,7 +34,6 @@
#define GPIO_MASK 0xFFFFE1FF
#define UART_BASE 0x00206000
-
#elif defined (CONFIG_UART2)
/* GPIO PORT C */
@@ -44,7 +42,7 @@
#define GPIO_MASK 0x0FFFFFFF
#define UART_BASE 0x207000
-#endif
+#endif
#define reg_URXD (*((volatile u32 *)(UART_BASE+0x00)))
#define reg_UTXD (*((volatile u32 *)(UART_BASE+0x40)))
@@ -64,16 +62,13 @@
#define TXFE_MASK 0x4000 /* Tx buffer empty */
#define RDR_MASK 0x0001 /* receive data ready */
-
void serial_setbrg (void) {
-/* config I/O pins for UART */
-
+ /* config I/O pins for UART */
reg_GIUS &= GPIO_MASK;
reg_GPR &= GPIO_MASK;
-/* config UART */
-
+ /* config UART */
reg_UCR1 = 5;
reg_UCR2 = 0x4027;
reg_UCR4 = 1;
@@ -84,22 +79,18 @@ void serial_setbrg (void) {
reg_UBRC = 8;
}
-
-
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*
*/
-
+
int serial_init (void) {
serial_setbrg ();
return (0);
}
-
-
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
@@ -112,7 +103,6 @@ int serial_getc (void) {
return (u8)reg_URXD;
}
-
/*
* Output a single byte to the serial port.
*/
@@ -129,7 +119,6 @@ void serial_putc (const char c) {
}
-
/*
* Test whether a character is in the RX buffer
*/
@@ -137,10 +126,8 @@ int serial_tstc (void) {
return reg_USR2 & RDR_MASK;
}
-
void serial_puts (const char *s) {
while (*s) {
serial_putc (*s++);
}
}
-
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index 66f978ebc2b..5a00133775d 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -59,10 +59,13 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BEDBUG | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DATE | \
CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_I2C | \
CFG_CMD_PCI | \
- 0 /* CFG_CMD_DATE */ )
+ CFG_CMD_SDRAM )
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
*/
@@ -77,17 +80,17 @@
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#if 1
-#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
#endif
#ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define CFG_PROMPT_HUSH_PS2 "> "
#endif
/* Print Buffer Size
*/
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
@@ -97,29 +100,29 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
-#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_BASE 0x00000000
#if defined(CONFIG_BOOT_ROM)
-#define CFG_FLASH_BASE 0xFF000000
+#define CFG_FLASH_BASE 0xFF000000
#else
-#define CFG_FLASH_BASE 0xFF800000
+#define CFG_FLASH_BASE 0xFF800000
#endif
-#define CFG_RESET_ADDRESS 0xFFF00100
+#define CFG_RESET_ADDRESS 0xFFF00100
-#define CFG_EUMB_ADDR 0xFCE00000
+#define CFG_EUMB_ADDR 0xFCE00000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
-#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
- /* Maximum amount of RAM.
- */
-#define CFG_MAX_RAM_SIZE 0x10000000
+/* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x10000000
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
@@ -133,13 +136,13 @@
* Definitions for initial stack pointer and data area
*/
- /* Size in bytes reserved for initial data
- */
-#define CFG_GBL_DATA_SIZE 128
+/* Size in bytes reserved for initial data
+ */
+#define CFG_GBL_DATA_SIZE 128
-#define CFG_INIT_RAM_ADDR 0x40000000
-#define CFG_INIT_RAM_END 0x1000
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*
* NS16550 Configuration
@@ -153,7 +156,30 @@
#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
-#define DUART_DCR (CFG_EUMB_ADDR + 0x4511)
+#define DUART_DCR (CFG_EUMB_ADDR + 0x4511)
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_PCF8563
+#define CFG_I2C_RTC_ADDR 0x51
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x58
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
/*
* Low Level Configuration Settings
@@ -162,62 +188,49 @@
* For the detail description refer to the MPC8240 user's manual.
*/
-#define CONFIG_SYS_CLK_FREQ 33000000
-#define CFG_HZ 1000
-/*
- * SDRAM Configuration Settings
- * Please note: currently only 64 and 128 MB SDRAM size supported
- * set CFG_SDRAM_SIZE to 64 or 128
- * Memory configuration using SPD information stored on the SODIMMs
- * not yet supported.
- */
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
-#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
- /* Bit-field values for MCCR1.
- */
-#define CFG_ROMNAL 0
-#define CFG_ROMFAL 7
+/* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 8
+
+#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
+#define CFG_BANK1_ROW 0
+#define CFG_BANK2_ROW 0
+#define CFG_BANK3_ROW 0
+#define CFG_BANK4_ROW 0
+#define CFG_BANK5_ROW 0
+#define CFG_BANK6_ROW 0
+#define CFG_BANK7_ROW 0
+
+/* Bit-field values for MCCR2.
+ */
-#if (CFG_SDRAM_SIZE == 64) /* 64 MB */
-#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
-#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */
-#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */
-#else
-# error "SDRAM size not supported"
-#endif
-#define CFG_BANK1_ROW 0
-#define CFG_BANK2_ROW 0
-#define CFG_BANK3_ROW 0
-#define CFG_BANK4_ROW 0
-#define CFG_BANK5_ROW 0
-#define CFG_BANK6_ROW 0
-#define CFG_BANK7_ROW 0
-
- /* Bit-field values for MCCR2.
- */
-#define CFG_REFINT 430 /* Refresh interval */
+#define CFG_REFINT 0x2ec
- /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
- */
-#define CFG_BSTOPRE 192
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 160
- /* Bit-field values for MCCR3.
- */
-#define CFG_REFREC 2 /* Refresh to activate interval */
-#define CFG_RDLAT 3 /* Data latancy from read command */
+/* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 0 /* Data latancy from read command */
- /* Bit-field values for MCCR4.
- */
-#define CFG_PRETOACT 2 /* Precharge to activate interval */
-#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
-#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
-#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
-#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
-#define CFG_ACTORW 2
+/* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
+#define CFG_ACTORW 2
#define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM 1
-#define CFG_REGDIMM 0
+#define CFG_EXTROM 0
+#define CFG_REGDIMM 0
/* Memory bank settings.
* Only bits 20-29 are actually used from these vales to set the
@@ -226,32 +239,35 @@
* address. Refer to the MPC8240 book.
*/
-#define CFG_BANK0_START 0x00000000
-#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
-#define CFG_BANK0_ENABLE 1
-#define CFG_BANK1_START 0x3ff00000
-#define CFG_BANK1_END 0x3fffffff
-#define CFG_BANK1_ENABLE 0
-#define CFG_BANK2_START 0x3ff00000
-#define CFG_BANK2_END 0x3fffffff
-#define CFG_BANK2_ENABLE 0
-#define CFG_BANK3_START 0x3ff00000
-#define CFG_BANK3_END 0x3fffffff
-#define CFG_BANK3_ENABLE 0
-#define CFG_BANK4_START 0x3ff00000
-#define CFG_BANK4_END 0x3fffffff
-#define CFG_BANK4_ENABLE 0
-#define CFG_BANK5_START 0x3ff00000
-#define CFG_BANK5_END 0x3fffffff
-#define CFG_BANK5_ENABLE 0
-#define CFG_BANK6_START 0x3ff00000
-#define CFG_BANK6_END 0x3fffffff
-#define CFG_BANK6_ENABLE 0
-#define CFG_BANK7_START 0x3ff00000
-#define CFG_BANK7_END 0x3fffffff
-#define CFG_BANK7_ENABLE 0
-
-#define CFG_ODCR 0xff
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+#define CFG_PGMAX 0x32 /* how long the 8240 retains the */
+ /* currently accessed page in memory */
+ /* see 8240 book for details */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -279,7 +295,7 @@
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
@@ -295,7 +311,7 @@
*/
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7F8000)
#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
#define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */
@@ -317,118 +333,118 @@
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define SRAM_BASE 0x80000000 /* SRAM base address */
-#define SRAM_END 0x801FFFFF
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define SRAM_END 0x801FFFFF
-/*---------------------------------------------------------------------*/
-/* CPC45 Memory Map */
-/*---------------------------------------------------------------------*/
-#define SRAM_BASE 0x80000000 /* SRAM base address */
-#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
-#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
-#define BCSR_BASE 0x80600000 /* board control / status registers */
-#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
-#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
-#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
+/*----------------------------------------------------------------------*/
+/* CPC45 Memory Map */
+/*----------------------------------------------------------------------*/
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
+#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
+#define BCSR_BASE 0x80600000 /* board control / status registers */
+#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
+#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
+#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
/*---------------------------------------------------------------------*/
-/* CPC45 Control/Status Registers */
+/* CPC45 Control/Status Registers */
/*---------------------------------------------------------------------*/
-#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
-#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
-#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
-#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
-#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
-#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
-#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
-#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
+#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
+#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
+#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
+#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
+#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
+#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
+#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
/* IRQ_ENA_1 bit definitions */
-#define I_ENA_1_IERA 0x80 /* INTA enable */
-#define I_ENA_1_IERB 0x40 /* INTB enable */
-#define I_ENA_1_IERC 0x20 /* INTC enable */
-#define I_ENA_1_IERD 0x10 /* INTD enable */
+#define I_ENA_1_IERA 0x80 /* INTA enable */
+#define I_ENA_1_IERB 0x40 /* INTB enable */
+#define I_ENA_1_IERC 0x20 /* INTC enable */
+#define I_ENA_1_IERD 0x10 /* INTD enable */
/* IRQ_STAT_1 bit definitions */
-#define I_STAT_1_INTA 0x80 /* INTA status */
-#define I_STAT_1_INTB 0x40 /* INTB status */
-#define I_STAT_1_INTC 0x20 /* INTC status */
-#define I_STAT_1_INTD 0x10 /* INTD status */
+#define I_STAT_1_INTA 0x80 /* INTA status */
+#define I_STAT_1_INTB 0x40 /* INTB status */
+#define I_STAT_1_INTC 0x20 /* INTC status */
+#define I_STAT_1_INTD 0x10 /* INTD status */
/* IRQ_ENA_2 bit definitions */
-#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
-#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
-#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
-#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
-#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
-#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
-#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
-#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
+#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
+#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
+#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
+#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
+#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
+#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
+#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
+#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
/* IRQ_STAT_2 bit definitions */
-#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
-#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
-#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
-#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
-#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
-#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
-#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
-#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
+#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
+#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
+#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
+#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
+#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
+#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
+#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
+#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
/* BOARD_CTRL bit definitions */
-#define USER_LEDS 2 /* 2 user LEDs */
+#define USER_LEDS 2 /* 2 user LEDs */
#if (USER_LEDS == 4)
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE 0x20 /* Flash write enable */
-#define B_CTRL_FWPT 0x10 /* Flash write protect */
-#define B_CTRL_LED3 0x08 /* LED 3 control */
-#define B_CTRL_LED2 0x04 /* LED 2 control */
-#define B_CTRL_LED1 0x02 /* LED 1 control */
-#define B_CTRL_LED0 0x01 /* LED 0 control */
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE 0x20 /* Flash write enable */
+#define B_CTRL_FWPT 0x10 /* Flash write protect */
+#define B_CTRL_LED3 0x08 /* LED 3 control */
+#define B_CTRL_LED2 0x04 /* LED 2 control */
+#define B_CTRL_LED1 0x02 /* LED 1 control */
+#define B_CTRL_LED0 0x01 /* LED 0 control */
#else
-#define B_CTRL_WRSE 0x80
-#define B_CTRL_KRSE 0x40
-#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
-#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
-#define B_CTRL_LED1 0x08 /* LED 1 control */
-#define B_CTRL_LED0 0x04 /* LED 0 control */
-#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
-#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
+#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
+#define B_CTRL_LED1 0x08 /* LED 1 control */
+#define B_CTRL_LED0 0x04 /* LED 0 control */
+#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
+#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
#endif
/* BOARD_STAT bit definitions */
-#define B_STAT_WDGE 0x80
-#define B_STAT_WDGS 0x40
-#define B_STAT_WRST 0x20
-#define B_STAT_KRST 0x10
-#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
-#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
-#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
-#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
+#define B_STAT_WDGE 0x80
+#define B_STAT_WDGS 0x40
+#define B_STAT_WRST 0x20
+#define B_STAT_KRST 0x10
+#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
+#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
+#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
+#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
/*---------------------------------------------------------------------*/
-/* Display addresses */
+/* Display addresses */
/*---------------------------------------------------------------------*/
-#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
-#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
-#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
+#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
+#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
+#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
-#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
-#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
+#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
+#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
-#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
-#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
-#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
-#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
-#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
-#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
-#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
-#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
+#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
+#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
+#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
+#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
+#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
+#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
+#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
+#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
/*-----------------------------------------------------------------------
@@ -436,14 +452,16 @@
*-----------------------------------------------------------------------
*/
#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_PNP
+#undef CONFIG_PCI_SCAN_SHOW
-#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
#define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
-#define PCI_ENET0_IOADDR 0x00104000
+#define PCI_ENET0_IOADDR 0x82000000
#define PCI_ENET0_MEMADDR 0x82000000
-#define PCI_PLX9030_MEMADDR 0x82100000
+#define PCI_PLX9030_IOADDR 0x82100000
+#define PCI_PLX9030_MEMADDR 0x82100000
#endif /* __CONFIG_H */
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index a7d30f0d759..a91662cf956 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -35,6 +35,8 @@
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */
+#define CONFIG_MISC_INIT_R
+
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
@@ -82,11 +84,37 @@
#endif
+/* Partitions */
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#if 1
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD 0
+#endif
+
+#if defined(CONFIG_BOOT_ROM)
+#define ADD_DOC_CMD 0
+#else
+#define ADD_DOC_CMD CFG_CMD_DOC
+#endif
+
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | ADD_PCI_CMD | \
- CFG_CMD_I2C | CFG_CMD_EEPROM | CFG_CMD_DATE)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IDE | \
+ ADD_DOC_CMD | \
+ ADD_PCI_CMD | \
+ CFG_CMD_DATE | \
+ CFG_CMD_BEDBUG | \
+ ADD_USB_CMD)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -95,8 +123,32 @@
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=pm520\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk30/ppc_82xx\0" \
+ "bootfile=/tftpboot/PM520/uImage\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
#if defined(CONFIG_MPC5200)
/*
@@ -128,11 +180,44 @@
#define CFG_I2C_RTC_ADDR 0x51
/*
- * Flash configuration
+ * Disk-On-Chip configuration
+ */
+
+#define CFG_DOC_SHORT_TIMEOUT
+#define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */
+
+#define CFG_DOC_SUPPORT_2000
+#define CFG_DOC_SUPPORT_MILLENNIUM
+#define CFG_DOC_BASE 0xE0000000
+#define CFG_DOC_SIZE 0x00100000
+
+#if defined(CONFIG_BOOT_ROM)
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFC000000 for 32 MB
+ * 0xFD000000 for 16 MB
+ * 0xFD800000 for 8 MB
+ */
+#define CFG_FLASH_BASE 0xfc000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_BOOTROM_BASE 0xFFF00000
+#define CFG_BOOTROM_SIZE 0x00080000
+#define CFG_ENV_ADDR (0xFDF00000 + 0x40000)
+#else
+/*
+ * Flash configuration (8,16 or 32 MB)
+ * TEXT base always at 0xFFF00000
+ * ENV_ADDR always at 0xFFF40000
+ * FLASH_BASE at 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
*/
-#define CFG_FLASH_BASE 0xff800000
-#define CFG_FLASH_SIZE 0x00800000
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x740000)
+#define CFG_FLASH_BASE 0xfe000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_ENV_ADDR (0xFFF00000 + 0x40000)
+#endif
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
@@ -228,15 +313,68 @@
#define CFG_HID0_FINAL 0
#endif
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_BOOTCS_START CFG_BOOTROM_BASE
+#define CFG_BOOTCS_SIZE CFG_BOOTROM_SIZE
+#define CFG_BOOTCS_CFG 0x00047800
+#define CFG_CS0_START CFG_BOOTROM_BASE
+#define CFG_CS0_SIZE CFG_BOOTROM_SIZE
+#define CFG_CS1_START CFG_FLASH_BASE
+#define CFG_CS1_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_CFG 0x0004fb00
+#else
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#define CFG_BOOTCS_CFG 0x0004fb00
#define CFG_CS0_START CFG_FLASH_BASE
#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CFG_CS1_START CFG_DOC_BASE
+#define CFG_CS1_SIZE CFG_DOC_SIZE
+#define CFG_CS1_CFG 0x00047800
+#endif
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x33333333
#define CFG_RESET_ADDRESS 0xff000000
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00005000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#undef CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 2 /* max. 2 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
#endif /* __CONFIG_H */
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index ff63259b5cc..369842b13a8 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -178,8 +178,6 @@
#define CFG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */
#endif
-
-
/*-----------------------------------------------------------------------
* Cache Configuration
*/
diff --git a/include/configs/Sandpoint8245.h b/include/configs/Sandpoint8245.h
index 9611d610320..46c6fdd6979 100644
--- a/include/configs/Sandpoint8245.h
+++ b/include/configs/Sandpoint8245.h
@@ -229,7 +229,7 @@
#else
#define CFG_NS16550_CLK 1843200
#endif
-
+
#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE)
#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE)
#define CFG_NS16550_COM3 (CFG_EUMB_ADDR + 0x4500)
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 9d4ab2b52ee..5cf092af550 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -1,6 +1,6 @@
/*
* include/configs/mx1ads.h
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -43,17 +43,17 @@
#define CONFIG_MC9328 1 /* It's a Motorola MC9328 SoC */
#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-#define BOARD_LATE_INIT 1
+#define BOARD_LATE_INIT 1
#define USE_920T_MMU 1
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#if 0
+#if 0
#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#endif
+#endif
/*
* Size of malloc() pool
@@ -73,7 +73,7 @@
* select serial console configuration
*/
-#define CONFIG_UART1 1
+#define CONFIG_UART1 1
/* #define CONFIG_UART2 1 */
#define CONFIG_BAUDRATE 115200
@@ -90,13 +90,13 @@
/*CFG_CMD_I2C |*/ \
/*CFG_CMD_USB |*/ \
CFG_CMD_REGINFO | \
- CFG_CMD_ELF)
+ CFG_CMD_ELF)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M"
+#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5c
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.22
@@ -113,10 +113,10 @@
/*
* Miscellaneous configurable options
*/
-
+
#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-
+
#define CFG_LONGHELP /* undef to save memory */
#ifdef CFG_HUSH_PARSER
@@ -126,7 +126,7 @@
#endif
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
/* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
@@ -158,7 +158,7 @@
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
-
+
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
@@ -178,7 +178,7 @@
#define PHYS_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_SECT (16)
#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff0000)
-
+
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x0f000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x100000
diff --git a/include/mc9328.h b/include/mc9328.h
index 5adbf2c6cd7..2a6e7577fb3 100644
--- a/include/mc9328.h
+++ b/include/mc9328.h
@@ -1,6 +1,6 @@
/*
* include/mc9328.h
- *
+ *
* (c) Copyright 2004
* Techware Information Technology, Inc.
* http://www.techware.com.tw/
@@ -14,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -23,157 +23,139 @@
* MA 02111-1307 USA
*/
-
#ifndef __MC9328_H__
#define __MC9328_H__
-typedef volatile unsigned long VU32;
-typedef VU32 * P_VU32;
+typedef volatile unsigned long VU32;
+typedef VU32 * P_VU32;
#define __REG(x) (*((volatile u32 *)(x)))
-
/*
- * MX1 Chip selects & internal memory's
+ * MX1 Chip selects & internal memory's
*/
-
-
-#define MX1_DMI_PHYS 0x00000000 /* double map image */
-#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */
+#define MX1_DMI_PHYS 0x00000000 /* double map image */
+#define MX1_BROM_PHYS 0x00100000 /* Bootstrape ROM */
#define MX1_ESRAM_PHYS 0x00300000 /* Embedded SRAM (128KB)*/
-#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */
-#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */
-#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */
-#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */
-#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */
-#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */
-#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */
-#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */
-
-
+#define MX1_CSD0_PHYS 0x08000000 /* CSD0 64MB (SDRAM) */
+#define MX1_CSD1_PHYS 0x0C000000 /* CSD1 64MB (SDRAM) */
+#define MX1_CS0_PHYS 0x10000000 /* CS0 32MB (Flash) */
+#define MX1_CS1_PHYS 0x12000000 /* CS1 16MB (Flash) */
+#define MX1_CS2_PHYS 0x13000000 /* CS2 16MB (Ext SRAM) */
+#define MX1_CS3_PHYS 0x14000000 /* CS3 16MB (Spare) */
+#define MX1_CS4_PHYS 0x15000000 /* CS4 16MB (Spare) */
+#define MX1_CS5_PHYS 0x16000000 /* CS5 16MB (Spare) */
/*
- * MX1 Watchdog registers
+ * MX1 Watchdog registers
*/
-
-#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */
+#define MX1_WCR __REG(0x00201000) /* Watchdog Control Register */
#define MX1_WSR __REG(0x00201004) /* Watchdog Service Register */
-#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */
-
-
+#define MX1_WSTR __REG(0x00201008) /* Watchdog Status Register */
/*
* MX1 Timer registers
*/
-
-#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */
-#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */
-#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */
-#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */
-#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */
-#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */
-
-
-#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */
-#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */
-#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */
-#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */
-#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */
-#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */
-
-
+#define MX1_TCTL1 __REG(0x00202000) /* Timer 1 Control Register */
+#define MX1_TPRER1 __REG(0x00202004) /* Timer 1 Prescaler Register */
+#define MX1_TCMP1 __REG(0x00202008) /* Timer 1 Compare Register */
+#define MX1_TCR1 __REG(0x0020200C) /* Timer 1 Capture Register */
+#define MX1_TCN1 __REG(0x00202010) /* Timer 1 Counter Register */
+#define MX1_TSTAT1 __REG(0x00202014) /* Timer 1 Status Register */
+
+#define MX1_TCTL2 __REG(0x00203000) /* Timer 2 Control Register */
+#define MX1_TPRER2 __REG(0x00203004) /* Timer 2 Prescaler Register */
+#define MX1_TCMP2 __REG(0x00203008) /* Timer 2 Compare Register */
+#define MX1_TCR2 __REG(0x0020300C) /* Timer 2 Capture Register */
+#define MX1_TCN2 __REG(0x00203010) /* Timer 2 Counter Register */
+#define MX1_TSTAT2 __REG(0x00203014) /* Timer 2 Status Register */
/*
* MX1 RTC registers
*/
-
-#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */
-#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */
-#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */
-#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */
-#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */
-#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */
-#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */
-#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */
-#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */
-#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */
-
+#define MX1_HOURMIN __REG(0x00204000) /* RTC Hour & Min Counter Registers */
+#define MX1_SECONDS __REG(0x00204004) /* RTC Seconds Counter Registers */
+#define MX1_ALRM_HM __REG(0x00204008) /* RTC Hour & Min Alarm Registers */
+#define MX1_ALRM_SEC __REG(0x0020400C) /* RTC Seconds Alarm Registers */
+#define MX1_RCCTL __REG(0x00204010) /* RTC Control Registers */
+#define MX1_RTCISR __REG(0x00204014) /* RTC Interrupt Status Registers */
+#define MX1_RTCIENR __REG(0x00204018) /* RTC Interrupt Enable Registers */
+#define MX1_STPWCH __REG(0x0020401C) /* RTC Stopwatch Minutes Registers */
+#define MX1_DAYR __REG(0x00204020) /* RTC Days Counter Registers */
+#define MX1_DAYALARM __REG(0x00204020) /* RTC Day Alarm Registers */
/*
* MX1 LCD Controller registers
*/
-
-#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */
-#define MX1_SIZE __REG(0x00205004) /* Size Register */
-#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */
-#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */
-#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */
+#define MX1_SSA __REG(0x00205000) /* Screen Start Address Register */
+#define MX1_SIZE __REG(0x00205004) /* Size Register */
+#define MX1_VPW __REG(0x00205008) /* Virtual Page Width Register */
+#define MX1_CPOS __REG(0x0020500C) /* LCD Cursor Position Register */
+#define MX1_LCWHB __REG(0x00205010) /* LCD Cursor Width Height & Blink Register */
#define MX1_LCHCC __REG(0x00205014) /* LCD Color Cursor Mapping Register */
-#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */
-#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */
-#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */
-#define MX1_POS __REG(0x00205024) /* Panning Offset Register */
-#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */
-#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */
-#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */
-#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */
-#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */
-#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */
-
+#define MX1_PCR __REG(0x00205018) /* LCD Panel Configuration Register */
+#define MX1_HCR __REG(0x0020501C) /* Horizontal Configuration Register */
+#define MX1_VCR __REG(0x00205020) /* Vertical Configuration Register */
+#define MX1_POS __REG(0x00205024) /* Panning Offset Register */
+#define MX1_LGPMR __REG(0x00205028) /* LCD Gray Palette Mapping Register */
+#define MX1_PWMR __REG(0x0020502C) /* PWM Contrast Control Register */
+#define MX1_DMACR __REG(0x00205030) /* DMA Control Register */
+#define MX1_RMCR __REG(0x00205034) /* Refresh Mode Control Register */
+#define MX1_LCDICR __REG(0x00205038) /* Interrupt Configuration Register */
+#define MX1_LCDISR __REG(0x00205040) /* Interrupt Status Register */
/*
* MX1 UART registers
*/
/* UART 1 */
-#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */
-#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */
-#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */
-#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */
-#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */
-#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */
-#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */
-#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */
-#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */
-#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */
-#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */
-#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */
+#define MX1_URX0D_1 __REG(0x00206000) /* UART 1 Receiver Register 0 */
+#define MX1_URX1D_1 __REG(0x00206004) /* UART 1 Receiver Register 1 */
+#define MX1_URX2D_1 __REG(0x00206008) /* UART 1 Receiver Register 2 */
+#define MX1_URX3D_1 __REG(0x0020600C) /* UART 1 Receiver Register 3 */
+#define MX1_URX4D_1 __REG(0x00206010) /* UART 1 Receiver Register 4 */
+#define MX1_URX5D_1 __REG(0x00206014) /* UART 1 Receiver Register 5 */
+#define MX1_URX6D_1 __REG(0x00206018) /* UART 1 Receiver Register 6 */
+#define MX1_URX7D_1 __REG(0x0020601C) /* UART 1 Receiver Register 7 */
+#define MX1_URX8D_1 __REG(0x00206020) /* UART 1 Receiver Register 8 */
+#define MX1_URX9D_1 __REG(0x00206024) /* UART 1 Receiver Register 9 */
+#define MX1_URX10D_1 __REG(0x00206028) /* UART 1 Receiver Register 10 */
+#define MX1_URX11D_1 __REG(0x0020602C) /* UART 1 Receiver Register 11 */
#define MX1_URX12D_1 __REG(0x00206030) /* UART 1 Receiver Register 12 */
#define MX1_URX13D_1 __REG(0x00206034) /* UART 1 Receiver Register 13 */
-#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */
+#define MX1_URX14D_1 __REG(0x00206038) /* UART 1 Receiver Register 14 */
#define MX1_URX15D_1 __REG(0x0020603c) /* UART 1 Receiver Register 15 */
-
-#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */
-#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */
-#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */
-#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */
-#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */
-#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */
-#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */
-#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */
-#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */
-#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */
-#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */
-#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */
+#define MX1_UTX0D_1 __REG(0x00206040) /* UART 1 Transmitter Register 0 */
+#define MX1_UTX1D_1 __REG(0x00206044) /* UART 1 Transmitter Register 1 */
+#define MX1_UTX2D_1 __REG(0x00206048) /* UART 1 Transmitter Register 2 */
+#define MX1_UTX3D_1 __REG(0x0020604C) /* UART 1 Transmitter Register 3 */
+#define MX1_UTX4D_1 __REG(0x00206050) /* UART 1 Transmitter Register 4 */
+#define MX1_UTX5D_1 __REG(0x00206054) /* UART 1 Transmitter Register 5 */
+#define MX1_UTX6D_1 __REG(0x00206058) /* UART 1 Transmitter Register 6 */
+#define MX1_UTX7D_1 __REG(0x0020605C) /* UART 1 Transmitter Register 7 */
+#define MX1_UTX8D_1 __REG(0x00206060) /* UART 1 Transmitter Register 8 */
+#define MX1_UTX9D_1 __REG(0x00206064) /* UART 1 Transmitter Register 9 */
+#define MX1_UTX10D_1 __REG(0x00206068) /* UART 1 Transmitter Register 10 */
+#define MX1_UTX11D_1 __REG(0x0020606C) /* UART 1 Transmitter Register 11 */
#define MX1_UTX12D_1 __REG(0x00206060) /* UART 1 Transmitter Register 12 */
#define MX1_UTX13D_1 __REG(0x00206074) /* UART 1 Transmitter Register 13 */
-#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */
+#define MX1_UTX14D_1 __REG(0x00206078) /* UART 1 Transmitter Register 14 */
#define MX1_UTX15D_1 __REG(0x0020607c) /* UART 1 Transmitter Register 15 */
#define MX1_UCR1_1 __REG(0x00206080) /* UART 1 Control Register 1 */
#define MX1_UCR2_1 __REG(0x00206084) /* UART 1 Control Register 2 */
#define MX1_UCR3_1 __REG(0x00206088) /* UART 1 Control Register 3 */
#define MX1_UCR4_1 __REG(0x0020608C) /* UART 1 Control Register 4 */
-#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */
+#define MX1_UFCR_1 __REG(0x00206090) /* UART 1 FIFO Control Register */
#define MX1_USR1_1 __REG(0x00206094) /* UART 1 Status Register 1 */
#define MX1_USR2_1 __REG(0x00206098) /* UART 1 Status Register 2 */
-#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */
-#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */
-#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */
-#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */
-#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */
+#define MX1_UESC_1 __REG(0x0020609C) /* UART 1 Escape Character Register */
+#define MX1_UTIM_1 __REG(0x002060A0) /* UART 1 Escape Timer Register */
+#define MX1_UBIR_1 __REG(0x002060A4) /* UART 1 BRM Incremental Register */
+#define MX1_UBMR_1 __REG(0x002060A8) /* UART 1 BRM Modulator Register */
+#define MX1_UBRC_1 __REG(0x002060AC) /* UART 1 Baud Rate Count Register */
#define MX1_BIPR1_1 __REG(0x002060B0) /* UART 1 BRM Incremental Preset Register 1 */
#define MX1_BIPR2_1 __REG(0x002060B4) /* UART 1 BRM Incremental Preset Register 2 */
#define MX1_BIPR3_1 __REG(0x002060B8) /* UART 1 BRM Incremental Preset Register 3 */
@@ -182,57 +164,55 @@ typedef VU32 * P_VU32;
#define MX1_BMPR2_1 __REG(0x002060C4) /* UART 1 BRM Modulator Preset Register 2 */
#define MX1_BMPR3_1 __REG(0x002060C8) /* UART 1 BRM Modulator Preset Register 3 */
#define MX1_BMPR4_1 __REG(0x002060CC) /* UART 1 BRM Modulator Preset Register 4 */
-#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */
-
+#define MX1_UTS_1 __REG(0x002060D0) /* UART 1 Test Register 1 */
/* UART 2 */
-#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */
-#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */
-#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */
-#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */
-#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */
-#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */
-#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */
-#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */
-#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */
-#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */
-#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */
-#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */
+#define MX1_URX0D_2 __REG(0x00207000) /* UART 2 Receiver Register 0 */
+#define MX1_URX1D_2 __REG(0x00207004) /* UART 2 Receiver Register 1 */
+#define MX1_URX2D_2 __REG(0x00207008) /* UART 2 Receiver Register 2 */
+#define MX1_URX3D_2 __REG(0x0020700C) /* UART 2 Receiver Register 3 */
+#define MX1_URX4D_2 __REG(0x00207010) /* UART 2 Receiver Register 4 */
+#define MX1_URX5D_2 __REG(0x00207014) /* UART 2 Receiver Register 5 */
+#define MX1_URX6D_2 __REG(0x00207018) /* UART 2 Receiver Register 6 */
+#define MX1_URX7D_2 __REG(0x0020701C) /* UART 2 Receiver Register 7 */
+#define MX1_URX8D_2 __REG(0x00207020) /* UART 2 Receiver Register 8 */
+#define MX1_URX9D_2 __REG(0x00207024) /* UART 2 Receiver Register 9 */
+#define MX1_URX10D_2 __REG(0x00207028) /* UART 2 Receiver Register 10 */
+#define MX1_URX11D_2 __REG(0x0020702C) /* UART 2 Receiver Register 11 */
#define MX1_URX12D_2 __REG(0x00207030) /* UART 2 Receiver Register 12 */
#define MX1_URX13D_2 __REG(0x00207034) /* UART 2 Receiver Register 13 */
-#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */
+#define MX1_URX14D_2 __REG(0x00207038) /* UART 2 Receiver Register 14 */
#define MX1_URX15D_2 __REG(0x0020703c) /* UART 2 Receiver Register 15 */
-
-#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */
-#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */
-#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */
-#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */
-#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */
-#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */
-#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */
-#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */
-#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */
-#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */
-#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */
-#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */
+#define MX1_UTX0D_2 __REG(0x00207040) /* UART 2 Transmitter Register 0 */
+#define MX1_UTX1D_2 __REG(0x00207044) /* UART 2 Transmitter Register 1 */
+#define MX1_UTX2D_2 __REG(0x00207048) /* UART 2 Transmitter Register 2 */
+#define MX1_UTX3D_2 __REG(0x0020704C) /* UART 2 Transmitter Register 3 */
+#define MX1_UTX4D_2 __REG(0x00207050) /* UART 2 Transmitter Register 4 */
+#define MX1_UTX5D_2 __REG(0x00207054) /* UART 2 Transmitter Register 5 */
+#define MX1_UTX6D_2 __REG(0x00207058) /* UART 2 Transmitter Register 6 */
+#define MX1_UTX7D_2 __REG(0x0020705C) /* UART 2 Transmitter Register 7 */
+#define MX1_UTX8D_2 __REG(0x00207060) /* UART 2 Transmitter Register 8 */
+#define MX1_UTX9D_2 __REG(0x00207064) /* UART 2 Transmitter Register 9 */
+#define MX1_UTX10D_2 __REG(0x00207068) /* UART 2 Transmitter Register 10 */
+#define MX1_UTX11D_2 __REG(0x0020706C) /* UART 2 Transmitter Register 11 */
#define MX1_UTX12D_2 __REG(0x00207060) /* UART 2 Transmitter Register 12 */
#define MX1_UTX13D_2 __REG(0x00207074) /* UART 2 Transmitter Register 13 */
-#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */
+#define MX1_UTX14D_2 __REG(0x00207078) /* UART 2 Transmitter Register 14 */
#define MX1_UTX15D_2 __REG(0x0020707c) /* UART 2 Transmitter Register 15 */
#define MX1_UCR1_2 __REG(0x00207080) /* UART 2 Control Register 1 */
#define MX1_UCR2_2 __REG(0x00207084) /* UART 2 Control Register 2 */
#define MX1_UCR3_2 __REG(0x00207088) /* UART 2 Control Register 3 */
#define MX1_UCR4_2 __REG(0x0020708C) /* UART 2 Control Register 4 */
-#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */
+#define MX1_UFCR_2 __REG(0x00207090) /* UART 2 FIFO Control Register */
#define MX1_USR1_2 __REG(0x00207094) /* UART 2 Status Register 1 */
#define MX1_USR2_2 __REG(0x00207098) /* UART 2 Status Register 2 */
-#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */
-#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */
-#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */
-#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */
-#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */
+#define MX1_UESC_2 __REG(0x0020709C) /* UART 2 Escape Character Register */
+#define MX1_UTIM_2 __REG(0x002070A0) /* UART 2 Escape Timer Register */
+#define MX1_UBIR_2 __REG(0x002070A4) /* UART 2 BRM Incremental Register */
+#define MX1_UBMR_2 __REG(0x002070A8) /* UART 2 BRM Modulator Register */
+#define MX1_UBRC_2 __REG(0x002070AC) /* UART 2 Baud Rate Count Register */
#define MX1_BIPR1_2 __REG(0x002070B0) /* UART 2 BRM Incremental Preset Register 1 */
#define MX1_BIPR2_2 __REG(0x002070B4) /* UART 2 BRM Incremental Preset Register 2 */
#define MX1_BIPR3_2 __REG(0x002070B8) /* UART 2 BRM Incremental Preset Register 3 */
@@ -241,827 +221,684 @@ typedef VU32 * P_VU32;
#define MX1_BMPR2_2 __REG(0x002070C4) /* UART 2 BRM Modulator Preset Register 2 */
#define MX1_BMPR3_2 __REG(0x002070C8) /* UART 2 BRM Modulator Preset Register 3 */
#define MX1_BMPR4_2 __REG(0x002070CC) /* UART 2 BRM Modulator Preset Register 4 */
-#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */
-
+#define MX1_UTS_2 __REG(0x002070D0) /* UART 2 Test Register 1 */
/*
* MX1 PWM registers
*/
-
-#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */
-#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */
-#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */
-#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */
-
-
+#define MX1_PWMC __REG(0x00208000) /* PWM Control Register */
+#define MX1_PWMS __REG(0x00208004) /* PWM Sample Register */
+#define MX1_PWMP __REG(0x00208008) /* PWM Period Register */
+#define MX1_PWMCNT __REG(0x0020800C) /* PWM Counter Register */
/*
* MX1 DMAC registers
*/
-
-#define MX1_DCR __REG(0x00209000) /* DMA Control Register */
-#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */
-#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */
-#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */
-#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */
-#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */
-#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */
-#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */
-
-#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */
-#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */
-#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */
-
-#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */
-#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */
-#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */
+#define MX1_DCR __REG(0x00209000) /* DMA Control Register */
+#define MX1_DISR __REG(0x00209004) /* DMA Interrupt Status Register */
+#define MX1_DIMR __REG(0x00209008) /* DMA Interrupt Mask Register */
+#define MX1_DBTOSR __REG(0x0020900C) /* DMA Burst Time-Out Status Register */
+#define MX1_DRTOSR __REG(0x00209010) /* DMA Request Time-Out Status Register */
+#define MX1_DSESR __REG(0x00209014) /* DMA Request Time-Out Status Register */
+#define MX1_DBOSR __REG(0x00209018) /* DMA Buffer Overflow Status Register */
+#define MX1_DBTOCR __REG(0x0020901C) /* DMA Burst Time-Out Control Register */
+
+#define MX1_WSRA __REG(0x00209040) /* DMA W-Size Register A */
+#define MX1_XSRA __REG(0x00209044) /* DMA X-Size Register A */
+#define MX1_YSRA __REG(0x00209048) /* DMA Y-Size Register A */
+
+#define MX1_WSRB __REG(0x0020904C) /* DMA W-Size Register B */
+#define MX1_XSRB __REG(0x00209050) /* DMA X-Size Register B */
+#define MX1_YSRB __REG(0x00209054) /* DMA Y-Size Register B */
/* Channel 0 */
#define MX1_SAR0 __REG(0x00209080) /* Channel 0 Source Address Register */
-#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */
-#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */
-#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */
-#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */
-#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */
-#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */
-#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */
-
+#define MX1_DAR0 __REG(0x00209084) /* Channel 0 Destination Address Register */
+#define MX1_CNTR0 __REG(0x00209088) /* Channel 0 Count Register */
+#define MX1_CCR0 __REG(0x0020908C) /* Channel 0 Control Register */
+#define MX1_RSSR0 __REG(0x00209090) /* Channel 0 Request Source Select Register */
+#define MX1_BLR0 __REG(0x00209094) /* Channel 0 Burst Length Register */
+#define MX1_RTOR0 __REG(0x00209098) /* Channel 0 Request Time-Out Register */
+#define MX1_BUCR0 __REG(0x00209098) /* Channel 0 Bus Utilization Control Register */
/* Channel 1 */
#define MX1_SAR1 __REG(0x002090C0) /* Channel 1 Source Address Register */
-#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */
-#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */
-#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */
-#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */
-#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */
-#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */
-#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */
-
+#define MX1_DAR1 __REG(0x002090C4) /* Channel 1 Destination Address Register */
+#define MX1_CNTR1 __REG(0x002090C8) /* Channel 1 Count Register */
+#define MX1_CCR1 __REG(0x002090CC) /* Channel 1 Control Register */
+#define MX1_RSSR1 __REG(0x002090D0) /* Channel 1 Request Source Select Register */
+#define MX1_BLR1 __REG(0x002090D4) /* Channel 1 Burst Length Register */
+#define MX1_RTOR1 __REG(0x002090D8) /* Channel 1 Request Time-Out Register */
+#define MX1_BUCR1 __REG(0x002090D8) /* Channel 1 Bus Utilization Control Register */
/* Channel 2 */
#define MX1_SAR2 __REG(0x00209100) /* Channel 2 Source Address Register */
-#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */
-#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */
-#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */
-#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */
-#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */
-#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */
-#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */
-
-
+#define MX1_DAR2 __REG(0x00209104) /* Channel 2 Destination Address Register */
+#define MX1_CNTR2 __REG(0x00209108) /* Channel 2 Count Register */
+#define MX1_CCR2 __REG(0x0020910C) /* Channel 2 Control Register */
+#define MX1_RSSR2 __REG(0x00209110) /* Channel 2 Request Source Select Register */
+#define MX1_BLR2 __REG(0x00209114) /* Channel 2 Burst Length Register */
+#define MX1_RTOR2 __REG(0x00209118) /* Channel 2 Request Time-Out Register */
+#define MX1_BUCR2 __REG(0x00209118) /* Channel 2 Bus Utilization Control Register */
/* Channel 3 */
#define MX1_SAR3 __REG(0x00209140) /* Channel 3 Source Address Register */
-#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */
-#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */
-#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */
-#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */
-#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */
-#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */
-#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */
-
+#define MX1_DAR3 __REG(0x00209144) /* Channel 3 Destination Address Register */
+#define MX1_CNTR3 __REG(0x00209148) /* Channel 3 Count Register */
+#define MX1_CCR3 __REG(0x0020914C) /* Channel 3 Control Register */
+#define MX1_RSSR3 __REG(0x00209150) /* Channel 3 Request Source Select Register */
+#define MX1_BLR3 __REG(0x00209154) /* Channel 3 Burst Length Register */
+#define MX1_RTOR3 __REG(0x00209158) /* Channel 3 Request Time-Out Register */
+#define MX1_BUCR3 __REG(0x00209158) /* Channel 3 Bus Utilization Control Register */
/* Channel 4 */
#define MX1_SAR4 __REG(0x00209180) /* Channel 4 Source Address Register */
-#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */
-#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */
-#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */
-#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */
-#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */
-#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */
-#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */
-
+#define MX1_DAR4 __REG(0x00209184) /* Channel 4 Destination Address Register */
+#define MX1_CNTR4 __REG(0x00209188) /* Channel 4 Count Register */
+#define MX1_CCR4 __REG(0x0020918C) /* Channel 4 Control Register */
+#define MX1_RSSR4 __REG(0x00209190) /* Channel 4 Request Source Select Register */
+#define MX1_BLR4 __REG(0x00209194) /* Channel 4 Burst Length Register */
+#define MX1_RTOR4 __REG(0x00209198) /* Channel 4 Request Time-Out Register */
+#define MX1_BUCR4 __REG(0x00209198) /* Channel 4 Bus Utilization Control Register */
/* Channel 5 */
#define MX1_SAR5 __REG(0x002091C0) /* Channel 5 Source Address Register */
-#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */
-#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */
-#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */
-#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */
-#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */
-#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */
-#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */
-
+#define MX1_DAR5 __REG(0x002091C4) /* Channel 5 Destination Address Register */
+#define MX1_CNTR5 __REG(0x002091C8) /* Channel 5 Count Register */
+#define MX1_CCR5 __REG(0x002091CC) /* Channel 5 Control Register */
+#define MX1_RSSR5 __REG(0x002091D0) /* Channel 5 Request Source Select Register */
+#define MX1_BLR5 __REG(0x002091D4) /* Channel 5 Burst Length Register */
+#define MX1_RTOR5 __REG(0x002091D8) /* Channel 5 Request Time-Out Register */
+#define MX1_BUCR5 __REG(0x002091D8) /* Channel 5 Bus Utilization Control Register */
/* Channel 6 */
#define MX1_SAR6 __REG(0x00209200) /* Channel 6 Source Address Register */
-#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */
-#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */
-#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */
-#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */
-#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */
-#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */
-#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */
-
+#define MX1_DAR6 __REG(0x00209204) /* Channel 6 Destination Address Register */
+#define MX1_CNTR6 __REG(0x00209208) /* Channel 6 Count Register */
+#define MX1_CCR6 __REG(0x0020920C) /* Channel 6 Control Register */
+#define MX1_RSSR6 __REG(0x00209210) /* Channel 6 Request Source Select Register */
+#define MX1_BLR6 __REG(0x00209214) /* Channel 6 Burst Length Register */
+#define MX1_RTOR6 __REG(0x00209218) /* Channel 6 Request Time-Out Register */
+#define MX1_BUCR6 __REG(0x00209218) /* Channel 6 Bus Utilization Control Register */
/* Channel 7 */
#define MX1_SAR7 __REG(0x00209240) /* Channel 7 Source Address Register */
-#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */
-#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */
-#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */
-#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */
-#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */
-#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */
-#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */
-
+#define MX1_DAR7 __REG(0x00209244) /* Channel 7 Destination Address Register */
+#define MX1_CNTR7 __REG(0x00209248) /* Channel 7 Count Register */
+#define MX1_CCR7 __REG(0x0020924C) /* Channel 7 Control Register */
+#define MX1_RSSR7 __REG(0x00209250) /* Channel 7 Request Source Select Register */
+#define MX1_BLR7 __REG(0x00209254) /* Channel 7 Burst Length Register */
+#define MX1_RTOR7 __REG(0x00209258) /* Channel 7 Request Time-Out Register */
+#define MX1_BUCR7 __REG(0x00209258) /* Channel 7 Bus Utilization Control Register */
/* Channel 8 */
#define MX1_SAR8 __REG(0x00209280) /* Channel 8 Source Address Register */
-#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */
-#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */
-#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */
-#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */
-#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */
-#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */
-#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */
-
+#define MX1_DAR8 __REG(0x00209284) /* Channel 8 Destination Address Register */
+#define MX1_CNTR8 __REG(0x00209288) /* Channel 8 Count Register */
+#define MX1_CCR8 __REG(0x0020928C) /* Channel 8 Control Register */
+#define MX1_RSSR8 __REG(0x00209290) /* Channel 8 Request Source Select Register */
+#define MX1_BLR8 __REG(0x00209294) /* Channel 8 Burst Length Register */
+#define MX1_RTOR8 __REG(0x00209298) /* Channel 8 Request Time-Out Register */
+#define MX1_BUCR8 __REG(0x00209298) /* Channel 8 Bus Utilization Control Register */
/* Channel 9 */
#define MX1_SAR9 __REG(0x002092C0) /* Channel 9 Source Address Register */
-#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */
-#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */
-#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */
-#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */
-#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */
-#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */
-#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */
-
+#define MX1_DAR9 __REG(0x002092C4) /* Channel 9 Destination Address Register */
+#define MX1_CNTR9 __REG(0x002092C8) /* Channel 9 Count Register */
+#define MX1_CCR9 __REG(0x002092CC) /* Channel 9 Control Register */
+#define MX1_RSSR9 __REG(0x002092D0) /* Channel 9 Request Source Select Register */
+#define MX1_BLR9 __REG(0x002092D4) /* Channel 9 Burst Length Register */
+#define MX1_RTOR9 __REG(0x002092D8) /* Channel 9 Request Time-Out Register */
+#define MX1_BUCR9 __REG(0x002092D8) /* Channel 9 Bus Utilization Control Register */
/* Channel 10 */
#define MX1_SAR10 __REG(0x00209300) /* Channel 10 Source Address Register */
-#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */
-#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */
-#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */
-#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */
-#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */
-#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */
-#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */
-
-
-#define MX1_TCR __REG(0x00209340) /* Test Control Register */
-#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */
-#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */
-#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */
-#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */
-
-
+#define MX1_DAR10 __REG(0x00209304) /* Channel 10 Destination Address Register */
+#define MX1_CNTR10 __REG(0x00209308) /* Channel 10 Count Register */
+#define MX1_CCR10 __REG(0x0020930C) /* Channel 10 Control Register */
+#define MX1_RSSR10 __REG(0x00209310) /* Channel 10 Request Source Select Register */
+#define MX1_BLR10 __REG(0x00209314) /* Channel 10 Burst Length Register */
+#define MX1_RTOR10 __REG(0x00209318) /* Channel 10 Request Time-Out Register */
+#define MX1_BUCR10 __REG(0x00209318) /* Channel 10 Bus Utilization Control Register */
+
+#define MX1_TCR __REG(0x00209340) /* Test Control Register */
+#define MX1_TFIFOAR __REG(0x00209344) /* Test FIFO A Register */
+#define MX1_TDRR __REG(0x00209348) /* Test DMA Request Register */
+#define MX1_TDIPR __REG(0x0020934C) /* Test DMA In Progress Register */
+#define MX1_TFIFOBR __REG(0x00209350) /* Test FIFO B Register */
/*
* MX1 SIM registers
*/
-#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */
-#define MX1_CNTL __REG(0x00211004) /* Control Register */
-#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */
-#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */
-#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */
-#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */
-#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */
-#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */
-#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */
+#define MX1_PORT_CNTL __REG(0x00211000) /* Port Control Register */
+#define MX1_CNTL __REG(0x00211004) /* Control Register */
+#define MX1_RCV_THRESHOLD __REG(0x00211008)/* Receive Threshold Register */
+#define MX1_ENABLE __REG(0x0021100C) /* Transmit/Receive Enable Register */
+#define MX1_XMT_STATUS __REG(0x00211010) /* Transmit Status Register */
+#define MX1_RCV_STATUS __REG(0x00211014) /* Receive Status Register */
+#define MX1_SIM_INT_MASK __REG(0x00211018) /* Interrupt Mask Register */
+#define MX1_XMT_BUF __REG(0x0021101C) /* Port Transmit Buffer Register */
+#define MX1_RCV_BUF __REG(0x00211020) /* Receive Buffer Register */
#define MX1_PORT_DETECT __REG(0x00211024) /* Detect Register */
#define MX1_XMT_THRESHOLD __REG(0x00211028)/* Transmit Threshold Register */
-#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */
-#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */
+#define MX1_GUARD_CNTL __REG(0x0021102C) /* Transmit Guard Control Register */
+#define MX1_OD_CONFIG __REG(0x00211030) /* Open-Drain Configuration Control Register */
#define MX1_RESET_CNTL __REG(0x00211034) /* Reset Control Register */
#define MX1_CHAR_WAIT __REG(0x00211038) /* Charactor Wait Timer Register */
-#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */
+#define MX1_GPCNT __REG(0x0021103C) /* General Purpose Counter Register */
#define MX1_DIVISOR __REG(0x00211040) /* Divisor Register */
-
/*
* MX1 USBD registers
*/
-#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */
-#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */
-#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */
-#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */
-#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */
+#define MX1_USB_FRAME __REG(0x00212000) /* USB Frame Number and Match Register */
+#define MX1_USB_SPEC __REG(0x00212004) /* USB Spec & Release Number Register */
+#define MX1_USB_STAT __REG(0x00212008) /* USB Status Register */
+#define MX1_USB_CTRL __REG(0x0021200C) /* USB Control Register */
+#define MX1_USB_DADR __REG(0x00212010) /* USB Descriptor RAM Address Register */
#define MX1_USB_DDAT __REG(0x00212014) /* USB Descriptor RAM/Endpoint buffer Data Register */
-#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */
-#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */
-#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */
-
+#define MX1_USB_INTR __REG(0x00212018) /* USB Interrupt Status Register */
+#define MX1_USB_MASK __REG(0x0021201C) /* USB Interrupt Mask Register */
+#define MX1_USB_ENAB __REG(0x00212024) /* USB Enable Register */
/* Endpoint 0 */
#define MX1_USB_EP0_STAT __REG(0x00212030) /* Endpoint 0 Status/Control Register */
#define MX1_USB_EP0_INTR __REG(0x00212034) /* Endpoint 0 Interrupt Status Register */
-#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */
+#define MX1_USB_EP0_MASK __REG(0x00212038) /* Endpoint 0 Interrupt Mask Register */
#define MX1_USB_EP0_FDAT __REG(0x0021203C) /* Endpoint 0 FIFO Data Register */
#define MX1_USB_EP0_FSTAT __REG(0x00212040) /* Endpoint 0 FIFO Status Register */
-#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */
+#define MX1_USB_EP0_FCTRL __REG(0x00212044) /* Endpoint 0 FIFO Control Register */
#define MX1_USB_EP0_LRFP __REG(0x00212048) /* Endpoint 0 Last Read Frame Pointer Register */
#define MX1_USB_EP0_LWFP __REG(0x0021204C) /* Endpoint 0 Last Write Frame Pointer Register */
#define MX1_USB_EP0_FALRM __REG(0x00212050) /* Endpoint 0 FIFO Alarm Register */
#define MX1_USB_EP0_FRDP __REG(0x00212054) /* Endpoint 0 FIFO Read Pointer Register */
#define MX1_USB_EP0_FWRP __REG(0x00212058) /* Endpoint 0 FIFO Write Pointer Register */
-
/* Endpoint 1 */
#define MX1_USB_EP1_STAT __REG(0x00212060) /* Endpoint 1 Status/Control Register */
#define MX1_USB_EP1_INTR __REG(0x00212064) /* Endpoint 1 Interrupt Status Register */
-#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */
+#define MX1_USB_EP1_MASK __REG(0x00212068) /* Endpoint 1 Interrupt Mask Register */
#define MX1_USB_EP1_FDAT __REG(0x0021206C) /* Endpoint 1 FIFO Data Register */
#define MX1_USB_EP1_FSTAT __REG(0x00212070) /* Endpoint 1 FIFO Status Register */
-#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */
+#define MX1_USB_EP1_FCTRL __REG(0x00212074) /* Endpoint 1 FIFO Control Register */
#define MX1_USB_EP1_LRFP __REG(0x00212078) /* Endpoint 1 Last Read Frame Pointer Register */
#define MX1_USB_EP1_LWFP __REG(0x0021207C) /* Endpoint 1 Last Write Frame Pointer Register */
#define MX1_USB_EP1_FALRM __REG(0x00212080) /* Endpoint 1 FIFO Alarm Register */
#define MX1_USB_EP1_FRDP __REG(0x00212084) /* Endpoint 1 FIFO Read Pointer Register */
#define MX1_USB_EP1_FWRP __REG(0x00212088) /* Endpoint 1 FIFO Write Pointer Register */
-
/* Endpoint 2 */
#define MX1_USB_EP2_STAT __REG(0x00212090) /* Endpoint 2 Status/Control Register */
#define MX1_USB_EP2_INTR __REG(0x00212094) /* Endpoint 2 Interrupt Status Register */
-#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */
+#define MX1_USB_EP2_MASK __REG(0x00212098) /* Endpoint 2 Interrupt Mask Register */
#define MX1_USB_EP2_FDAT __REG(0x0021209C) /* Endpoint 2 FIFO Data Register */
#define MX1_USB_EP2_FSTAT __REG(0x002120A0) /* Endpoint 2 FIFO Status Register */
-#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */
+#define MX1_USB_EP2_FCTRL __REG(0x002120A4) /* Endpoint 2 FIFO Control Register */
#define MX1_USB_EP2_LRFP __REG(0x002120A8) /* Endpoint 2 Last Read Frame Pointer Register */
#define MX1_USB_EP2_LWFP __REG(0x002120AC) /* Endpoint 2 Last Write Frame Pointer Register */
#define MX1_USB_EP2_FALRM __REG(0x002120B0) /* Endpoint 2 FIFO Alarm Register */
#define MX1_USB_EP2_FRDP __REG(0x002120B4) /* Endpoint 2 FIFO Read Pointer Register */
#define MX1_USB_EP2_FWRP __REG(0x002120B8) /* Endpoint 2 FIFO Write Pointer Register */
-
/* Endpoint 3 */
#define MX1_USB_EP3_STAT __REG(0x002120C0) /* Endpoint 3 Status/Control Register */
#define MX1_USB_EP3_INTR __REG(0x002120C4) /* Endpoint 3 Interrupt Status Register */
-#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */
+#define MX1_USB_EP3_MASK __REG(0x002120C8) /* Endpoint 3 Interrupt Mask Register */
#define MX1_USB_EP3_FDAT __REG(0x002120CC) /* Endpoint 3 FIFO Data Register */
#define MX1_USB_EP3_FSTAT __REG(0x002120D0) /* Endpoint 3 FIFO Status Register */
-#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */
+#define MX1_USB_EP3_FCTRL __REG(0x002120D4) /* Endpoint 3 FIFO Control Register */
#define MX1_USB_EP3_LRFP __REG(0x002120D8) /* Endpoint 3 Last Read Frame Pointer Register */
#define MX1_USB_EP3_LWFP __REG(0x002120DC) /* Endpoint 3 Last Write Frame Pointer Register */
#define MX1_USB_EP3_FALRM __REG(0x002120E0) /* Endpoint 3 FIFO Alarm Register */
#define MX1_USB_EP3_FRDP __REG(0x002120E4) /* Endpoint 3 FIFO Read Pointer Register */
#define MX1_USB_EP3_FWRP __REG(0x002120E8) /* Endpoint 3 FIFO Write Pointer Register */
-
-
/* Endpoint 4 */
#define MX1_USB_EP4_STAT __REG(0x002120F0) /* Endpoint 4 Status/Control Register */
#define MX1_USB_EP4_INTR __REG(0x002120F4) /* Endpoint 4 Interrupt Status Register */
-#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */
+#define MX1_USB_EP4_MASK __REG(0x002120F8) /* Endpoint 4 Interrupt Mask Register */
#define MX1_USB_EP4_FDAT __REG(0x002120FC) /* Endpoint 4 FIFO Data Register */
#define MX1_USB_EP4_FSTAT __REG(0x00212100) /* Endpoint 4 FIFO Status Register */
-#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */
+#define MX1_USB_EP4_FCTRL __REG(0x00212104) /* Endpoint 4 FIFO Control Register */
#define MX1_USB_EP4_LRFP __REG(0x00212108) /* Endpoint 4 Last Read Frame Pointer Register */
#define MX1_USB_EP4_LWFP __REG(0x0021210C) /* Endpoint 4 Last Write Frame Pointer Register */
#define MX1_USB_EP4_FALRM __REG(0x00212110) /* Endpoint 4 FIFO Alarm Register */
#define MX1_USB_EP4_FRDP __REG(0x00212114) /* Endpoint 4 FIFO Read Pointer Register */
#define MX1_USB_EP4_FWRP __REG(0x00212118) /* Endpoint 4 FIFO Write Pointer Register */
-
-
/* Endpoint 5 */
#define MX1_USB_EP5_STAT __REG(0x00212120) /* Endpoint 5 Status/Control Register */
#define MX1_USB_EP5_INTR __REG(0x00212124) /* Endpoint 5 Interrupt Status Register */
-#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */
+#define MX1_USB_EP5_MASK __REG(0x00212128) /* Endpoint 5 Interrupt Mask Register */
#define MX1_USB_EP5_FDAT __REG(0x0021212C) /* Endpoint 5 FIFO Data Register */
#define MX1_USB_EP5_FSTAT __REG(0x00212130) /* Endpoint 5 FIFO Status Register */
-#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */
+#define MX1_USB_EP5_FCTRL __REG(0x00212134) /* Endpoint 5 FIFO Control Register */
#define MX1_USB_EP5_LRFP __REG(0x00212138) /* Endpoint 5 Last Read Frame Pointer Register */
#define MX1_USB_EP5_LWFP __REG(0x0021213C) /* Endpoint 5 Last Write Frame Pointer Register */
#define MX1_USB_EP5_FALRM __REG(0x00212140) /* Endpoint 5 FIFO Alarm Register */
#define MX1_USB_EP5_FRDP __REG(0x00212144) /* Endpoint 5 FIFO Read Pointer Register */
#define MX1_USB_EP5_FWRP __REG(0x00212148) /* Endpoint 5 FIFO Write Pointer Register */
-
-
-
/*
* MX1 SPI 1 registers
*/
-
-#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */
-#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */
-#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */
-#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */
-#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */
-#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */
-#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */
-#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */
-
-
-
+#define MX1_RXDATAREG1 __REG(0x00213000) /* SPI 1 Rx Data Register */
+#define MX1_TXDATAREG1 __REG(0x00213004) /* SPI 1 Tx Data Register */
+#define MX1_CONTROLREG1 __REG(0x00213008) /* SPI 1 Control Register */
+#define MX1_INTREG1 __REG(0x0021300C) /* SPI 1 Interrupt Control/Status Register */
+#define MX1_TESTREG1 __REG(0x00213010) /* SPI 1 Test Register */
+#define MX1_PERIODREG1 __REG(0x00213014) /* SPI 1 Sample Period Control Register */
+#define MX1_DMAREG1 __REG(0x00213018) /* SPI 1 DMA Control Register */
+#define MX1_RESETREG1 __REG(0x00213018) /* SPI 1 Soft Reset Register */
/*
* MX1 MMC/SDHC registers
*/
-
-#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */
-#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */
-#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */
+#define MX1_STR_STP_CLK __REG(0x00214000) /* MMC/SD Clock Control Register */
+#define MX1_STATUS __REG(0x00214004) /* MMC/SD Status Register */
+#define MX1_CLK_RATE __REG(0x00214008) /* MMC/SD Clock Rate Register */
#define MX1_CMD_DAT_CONT __REG(0x0021400C) /* MMC/SD Command & Data Control Register */
-#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */
+#define MX1_RES_TO __REG(0x00214010) /* MMC/SD Response Time Out Register */
#define MX1_READ_TO __REG(0x00214014) /* MMC/SD Read Time Out Register */
#define MX1_BLK_LEN __REG(0x00214018) /* MMC/SD Block Length Register */
#define MX1_NOB __REG(0x0021401C) /* MMC/SD Number of Block Register */
#define MX1_REV_NO __REG(0x00214020) /* MMC/SD Revision Number Register */
#define MX1_MMC_INT_MASK __REG(0x00214024) /* MMC/SD Interrupt Mask Register */
-#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */
-#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */
-#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */
-#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */
+#define MX1_CMD __REG(0x00214028) /* MMC/SD Command Number Register */
+#define MX1_ARGH __REG(0x0021402C) /* MMC/SD Higher Argument Register */
+#define MX1_ARGL __REG(0x00214030) /* MMC/SD Lower Argument Register */
+#define MX1_RES_FIFO __REG(0x00214034) /* MMC/SD Response FIFO Register */
#define MX1_BUFFER_ACCESS __REG(0x00214038) /* MMC/SD Buffer Access Register */
-
-
/*
* MX1 ASP registers
*/
-
-#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */
-#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */
-#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */
-#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */
-#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */
-#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */
-#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */
-#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */
-#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */
-#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */
-#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */
-#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */
-#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */
-
-
+#define MX1_ASP_PADFIFO __REG(0x00215000) /* Pen Sample FIFO */
+#define MX1_ASP_VADFIFO __REG(0x00215004) /* Voice ADC Register */
+#define MX1_ASP_VDAFIFO __REG(0x00215008) /* Voice DAC Register */
+#define MX1_ASP_VADCOEF __REG(0x0021500C) /* Voice ADC FIR Coefficients RAM */
+#define MX1_ASP_ACNTLCR __REG(0x00215010) /* Control Register */
+#define MX1_ASP_PSMPLRG __REG(0x00215014) /* Pen A/D Sample Rate Control Register */
+#define MX1_ASP_ICNTLR __REG(0x00215018) /* Interrupt Control Register */
+#define MX1_ASP_ISTATR __REG(0x0021501C) /* Interrupt/Error Status Register */
+#define MX1_ASP_VADGAIN __REG(0x00215020) /* Voice ADC Control Register */
+#define MX1_ASP_VDAGAIN __REG(0x00215024) /* Voice DAC Control Register */
+#define MX1_ASP_VDACOEF __REG(0x00215028) /* Voice DAC FIR Coefficients RAM */
+#define MX1_ASP_CLKDIV __REG(0x0021502C) /* Clock Divide Register */
+#define MX1_ASP_CMPCNTL __REG(0x0021502C) /* Compare Control Register */
/*
* MX1 BTA registers
*/
-
/*
* MX1 I2C registers
*/
-
-#define MX1_IADR __REG(0x00217000) /* I2C Address Register */
-#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */
-#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */
-#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */
-#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */
-
-
+#define MX1_IADR __REG(0x00217000) /* I2C Address Register */
+#define MX1_IFDR __REG(0x00217004) /* I2C Frequency Divider Register */
+#define MX1_I2CR __REG(0x00217008) /* I2C Control Register */
+#define MX1_I2CSR __REG(0x0021700C) /* I2C Status Register */
+#define MX1_I2DR __REG(0x00217010) /* I2C Data I/O Register */
/*
* MX1 SSI registers
*/
-
-#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */
-#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */
-#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */
-#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */
-#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */
-#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */
-#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */
-#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */
-#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */
-#define MX1_SOR __REG(0x00218024) /* SSI Option Register */
-
-
+#define MX1_STX __REG(0x00218000) /* SSI Transmit Data Register */
+#define MX1_SRX __REG(0x00218004) /* SSI Receive Data Register */
+#define MX1_SCSR __REG(0x00218008) /* SSI Control/Status Register */
+#define MX1_STCR __REG(0x0021800C) /* SSI Transmit Configuration Register */
+#define MX1_SRCR __REG(0x00218010) /* SSI Recieve Configuration Register */
+#define MX1_STCCR __REG(0x00218014) /* SSI Transmit Clock Control Register */
+#define MX1_SRCCR __REG(0x00218018) /* SSI Receive Clock Control Register */
+#define MX1_STSR __REG(0x0021801C) /* SSI Time Slot Register */
+#define MX1_SFCSR __REG(0x00218020) /* SSI FIFO Control/Status Register */
+#define MX1_SOR __REG(0x00218024) /* SSI Option Register */
/*
* MX1 SPI 2 registers
*/
-
-#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */
-#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */
-#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */
-#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */
-#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */
-#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */
-#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */
-#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */
-
-
+#define MX1_RXDATAREG2 __REG(0x00219000) /* SPI 2 Rx Data Register */
+#define MX1_TXDATAREG2 __REG(0x00219004) /* SPI 2 Tx Data Register */
+#define MX1_CONTROLREG2 __REG(0x00219008) /* SPI 2 Control Register */
+#define MX1_INTREG2 __REG(0x0021900C) /* SPI 2 Interrupt Control/Status Register */
+#define MX1_TESTREG2 __REG(0x00219010) /* SPI 2 Test Register */
+#define MX1_PERIODREG2 __REG(0x00219014) /* SPI 2 Sample Period Control Register */
+#define MX1_DMAREG2 __REG(0x00219018) /* SPI 2 DMA Control Register */
+#define MX1_RESETREG2 __REG(0x00219018) /* SPI 2 Soft Reset Register */
/*
* MX1 MSHC registers
*/
-
-#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */
-#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */
-#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */
-#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */
-#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */
-#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */
-#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */
-#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */
-#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */
-#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */
-#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */
-
-
+#define MX1_MSCMD __REG(0x0021A000) /* Memory Stick Command Register */
+#define MX1_MSCS __REG(0x0021A002) /* Memory Stick Control/Status Register */
+#define MX1_MSTDATA __REG(0x0021A004) /* Memory Stick Transmit FIFO Data Register */
+#define MX1_MSRDATA __REG(0x0021A004) /* Memory Stick Recieve FIFO Data Register */
+#define MX1_MSICS __REG(0x0021A006) /* Memory Stick Interrupt Control/Status Register */
+#define MX1_MSPPCD __REG(0x0021A008) /* Memory Stick Parallel Port Control/Data Register */
+#define MX1_MSC2 __REG(0x0021A00A) /* Memory Stick Control 2 Register */
+#define MX1_MSACD __REG(0x0021A00C) /* Memory Stick Auto Command Register */
+#define MX1_MSFAECS __REG(0x0021A00E) /* Memory Stick FIFO Access Error Control/Status Register */
+#define MX1_MSCLKD __REG(0x0021A010) /* Memory Stick Serial Clock divider Register */
+#define MX1_MSDRQC __REG(0x0021A012) /* Memory Stick DMA Request Control Register */
/*
* MX1 PLLCLK registers
*/
-
-#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */
-#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */
+#define MX1_CSCR __REG(0x0021B000) /* Clock Source Control Register */
+#define MX1_MPCTL0 __REG(0x0021B004) /* MCU PLL Control Register 0 */
#define MX1_MPCTL1 __REG(0x0021B008) /* MCU PLL & System Clock Control Register 1 */
#define MX1_UPCTL0 __REG(0x0021B00C) /* USB PLL Control Register 0 */
#define MX1_UPCTL1 __REG(0x0021B010) /* USB PLL Control Register 1 */
-#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */
-
+#define MX1_PCDR __REG(0x0021B020) /* Peripheral Clock Divider Register */
/*
* MX1 RESET registers
*/
-
-#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */
-
-
+#define MX1_RSR __REG(0x0021B800) /* Reset Source Register */
/*
* MX1 SYS CTRL registers
*/
-
-#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */
-#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */
-#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */
-
+#define MX1_SIDR __REG(0x0021B804) /* Silicon ID Register */
+#define MX1_FMCR __REG(0x0021B808) /* Function MultiPlexing Control Register */
+#define MX1_GPCR __REG(0x0021B80C) /* Global Peripheral Control Register */
/*
* MX1 GPIO registers
*/
/* Port A */
-#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */
+#define MX1_DDIR_A __REG(0x0021C000) /* Port A Data Direction Register */
#define MX1_OCR1_A __REG(0x0021C004) /* Port A Output Configuration Register 1 */
#define MX1_OCR2_A __REG(0x0021C008) /* Port A Output Configuration Register 2 */
#define MX1_ICONFA1_A __REG(0x0021C00C) /* Port A Input Configuration Register A1 */
#define MX1_ICONFA2_A __REG(0x0021C010) /* Port A Input Configuration Register A2 */
#define MX1_ICONFB1_A __REG(0x0021C014) /* Port A Input Configuration Register B1 */
#define MX1_ICONFB2_A __REG(0x0021C018) /* Port A Input Configuration Register B2 */
-#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */
-#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */
-#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */
-#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */
-#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */
+#define MX1_DR_A __REG(0x0021C01C) /* Port A Data Register */
+#define MX1_GIUS_A __REG(0x0021C020) /* Port A GPIO In Use Register */
+#define MX1_SSR_A __REG(0x0021C024) /* Port A Sample Status Register */
+#define MX1_ICR1_A __REG(0x0021C028) /* Port A Interrupt Configuration Register 1 */
+#define MX1_ICR2_A __REG(0x0021C02C) /* Port A Interrupt Configuration Register 2 */
#define MX1_IMR_A __REG(0x0021C030) /* Port A Interrupt Mask Register */
#define MX1_ISR_A __REG(0x0021C034) /* Port A Interrupt Status Register */
#define MX1_GPR_A __REG(0x0021C038) /* Port A General Purpose Register */
#define MX1_SWR_A __REG(0x0021C03C) /* Port A Software Reset Register */
#define MX1_PUEN_A __REG(0x0021C040) /* Port A Pull Up Enable Register */
-
/* Port B */
-#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */
+#define MX1_DDIR_B __REG(0x0021C100) /* Port B Data Direction Register */
#define MX1_OCR1_B __REG(0x0021C104) /* Port B Output Configuration Register 1 */
#define MX1_OCR2_B __REG(0x0021C108) /* Port B Output Configuration Register 2 */
#define MX1_ICONFA1_B __REG(0x0021C10C) /* Port B Input Configuration Register A1 */
#define MX1_ICONFA2_B __REG(0x0021C110) /* Port B Input Configuration Register A2 */
#define MX1_ICONFB1_B __REG(0x0021C114) /* Port B Input Configuration Register B1 */
#define MX1_ICONFB2_B __REG(0x0021C118) /* Port B Input Configuration Register B2 */
-#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */
-#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */
-#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */
-#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */
-#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */
+#define MX1_DR_B __REG(0x0021C11C) /* Port B Data Register */
+#define MX1_GIUS_B __REG(0x0021C120) /* Port B GPIO In Use Register */
+#define MX1_SSR_B __REG(0x0021C124) /* Port B Sample Status Register */
+#define MX1_ICR1_B __REG(0x0021C128) /* Port B Interrupt Configuration Register 1 */
+#define MX1_ICR2_B __REG(0x0021C12C) /* Port B Interrupt Configuration Register 2 */
#define MX1_IMR_B __REG(0x0021C130) /* Port B Interrupt Mask Register */
#define MX1_ISR_B __REG(0x0021C134) /* Port B Interrupt Status Register */
#define MX1_GPR_B __REG(0x0021C138) /* Port B General Purpose Register */
#define MX1_SWR_B __REG(0x0021C13C) /* Port B Software Reset Register */
#define MX1_PUEN_B __REG(0x0021C140) /* Port B Pull Up Enable Register */
-
-
/* Port C */
-#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */
+#define MX1_DDIR_C __REG(0x0021C200) /* Port C Data Direction Register */
#define MX1_OCR1_C __REG(0x0021C204) /* Port C Output Configuration Register 1 */
#define MX1_OCR2_C __REG(0x0021C208) /* Port C Output Configuration Register 2 */
#define MX1_ICONFA1_C __REG(0x0021C20C) /* Port C Input Configuration Register A1 */
#define MX1_ICONFA2_C __REG(0x0021C210) /* Port C Input Configuration Register A2 */
#define MX1_ICONFB1_C __REG(0x0021C214) /* Port C Input Configuration Register B1 */
#define MX1_ICONFB2_C __REG(0x0021C218) /* Port C Input Configuration Register B2 */
-#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */
-#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */
-#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */
-#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */
-#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */
+#define MX1_DR_C __REG(0x0021C21C) /* Port C Data Register */
+#define MX1_GIUS_C __REG(0x0021C220) /* Port C GPIO In Use Register */
+#define MX1_SSR_C __REG(0x0021C224) /* Port C Sample Status Register */
+#define MX1_ICR1_C __REG(0x0021C228) /* Port C Interrupt Configuration Register 1 */
+#define MX1_ICR2_C __REG(0x0021C22C) /* Port C Interrupt Configuration Register 2 */
#define MX1_IMR_C __REG(0x0021C230) /* Port C Interrupt Mask Register */
#define MX1_ISR_C __REG(0x0021C234) /* Port C Interrupt Status Register */
#define MX1_GPR_C __REG(0x0021C238) /* Port C General Purpose Register */
#define MX1_SWR_C __REG(0x0021C23C) /* Port C Software Reset Register */
#define MX1_PUEN_C __REG(0x0021C240) /* Port C Pull Up Enable Register */
-
-
/* Port D */
-#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */
+#define MX1_DDIR_D __REG(0x0021C300) /* Port D Data Direction Register */
#define MX1_OCR1_D __REG(0x0021C304) /* Port D Output Configuration Register 1 */
#define MX1_OCR2_D __REG(0x0021C308) /* Port D Output Configuration Register 2 */
#define MX1_ICONFA1_D __REG(0x0021C30C) /* Port D Input Configuration Register A1 */
#define MX1_ICONFA2_D __REG(0x0021C310) /* Port D Input Configuration Register A2 */
#define MX1_ICONFB1_D __REG(0x0021C314) /* Port D Input Configuration Register B1 */
#define MX1_ICONFB2_D __REG(0x0021C318) /* Port D Input Configuration Register B2 */
-#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */
-#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */
-#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */
-#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */
-#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */
+#define MX1_DR_D __REG(0x0021C31C) /* Port D Data Register */
+#define MX1_GIUS_D __REG(0x0021C320) /* Port D GPIO In Use Register */
+#define MX1_SSR_D __REG(0x0021C324) /* Port D Sample Status Register */
+#define MX1_ICR1_D __REG(0x0021C328) /* Port D Interrupt Configuration Register 1 */
+#define MX1_ICR2_D __REG(0x0021C32C) /* Port D Interrupt Configuration Register 2 */
#define MX1_IMR_D __REG(0x0021C330) /* Port D Interrupt Mask Register */
#define MX1_ISR_D __REG(0x0021C334) /* Port D Interrupt Status Register */
#define MX1_GPR_D __REG(0x0021C338) /* Port D General Purpose Register */
#define MX1_SWR_D __REG(0x0021C33C) /* Port D Software Reset Register */
#define MX1_PUEN_D __REG(0x0021C340) /* Port D Pull Up Enable Register */
-
-
/*
* MX1 EIM registers
*/
-
-#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */
-#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */
-#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */
-#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */
-#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */
-#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */
-#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */
-#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */
-#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */
-#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */
-#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */
-#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */
-#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */
-
-
+#define MX1_CS0U __REG(0x00220000) /* Chip Select 0 Upper Control Register */
+#define MX1_CS0L __REG(0x00220004) /* Chip Select 0 Lower Control Register */
+#define MX1_CS1U __REG(0x00220008) /* Chip Select 1 Upper Control Register */
+#define MX1_CS1L __REG(0x0022000C) /* Chip Select 1 Lower Control Register */
+#define MX1_CS2U __REG(0x00220010) /* Chip Select 2 Upper Control Register */
+#define MX1_CS2L __REG(0x00220014) /* Chip Select 2 Lower Control Register */
+#define MX1_CS3U __REG(0x00220018) /* Chip Select 3 Upper Control Register */
+#define MX1_CS3L __REG(0x0022001C) /* Chip Select 3 Lower Control Register */
+#define MX1_CS4U __REG(0x00220020) /* Chip Select 4 Upper Control Register */
+#define MX1_CS4L __REG(0x00220024) /* Chip Select 4 Lower Control Register */
+#define MX1_CS5U __REG(0x00220028) /* Chip Select 5 Upper Control Register */
+#define MX1_CS5L __REG(0x0022002C) /* Chip Select 5 Lower Control Register */
+#define MX1_WEIM __REG(0x00220030) /* weim cONFIGURATION Register */
/*
* MX1 SDRAMC registers
*/
-
-#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */
-#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */
-#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */
-#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */
-
-
+#define MX1_SDCTL0 __REG(0x00221000) /* SDRAM 0 Control Register */
+#define MX1_SDCTL1 __REG(0x00221004) /* SDRAM 1 Control Register */
+#define MX1_MISCELLANEOUS __REG(0x00221014) /* Miscellaneous Register */
+#define MX1_SDRST __REG(0x00221018) /* SDRAM Reset Register */
/*
* MX1 MMA registers
*/
-
-#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */
-#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */
-#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */
-#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */
-#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */
-#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */
-#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */
-#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */
-#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */
-#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */
+#define MX1_MMA_MAC_MOD __REG(0x00222000) /* MMA MAC Module Register */
+#define MX1_MMA_MAC_CTRL __REG(0x00222004) /* MMA MAC Control Register */
+#define MX1_MMA_MAC_MULT __REG(0x00222008) /* MMA MAC Multiply Counter Register */
+#define MX1_MMA_MAC_ACCU __REG(0x0022200C) /* MMA MAC Accumulate Counter Register */
+#define MX1_MMA_MAC_INTR __REG(0x00222010) /* MMA MAC Interrupt Register */
+#define MX1_MMA_MAC_INTR_MASK __REG(0x00222014) /* MMA MAC Interrupt Mask Register */
+#define MX1_MMA_MAC_FIFO __REG(0x00222018) /* MMA MAC FIFO Register */
+#define MX1_MMA_MAC_FIFO_STAT __REG(0x0022201C) /* MMA MAC FIFO Status Register */
+#define MX1_MMA_MAC_BURST __REG(0x00222020) /* MMA MAC Burst Count Register */
+#define MX1_MMA_MAC_BITSEL __REG(0x00222024) /* MMA MAC Bit Select Register */
#define MX1_MMA_MAC_XBASE __REG(0x00222200) /* MMA MAC X Base Address Register */
-#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */
-#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */
-#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */
-#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */
-#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */
-
+#define MX1_MMA_MAC_XINDEX __REG(0x00222204) /* MMA MAC X Index Register */
+#define MX1_MMA_MAC_XLENGTH __REG(0x00222208) /* MMA MAC X Length Register */
+#define MX1_MMA_MAC_XMODIFY __REG(0x0022220C) /* MMA MAC X Modify Register */
+#define MX1_MMA_MAC_XINCR __REG(0x00222210) /* MMA MAC X Increment Register */
+#define MX1_MMA_MAC_XCOUNT __REG(0x00222214) /* MMA MAC X Count Register */
#define MX1_MMA_MAC_YBASE __REG(0x00222300) /* MMA MAC Y Base Address Register */
-#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */
-#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */
-#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */
-#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */
-#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */
-
-
-#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */
-#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */
-#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */
-#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */
-#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */
-#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */
-#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */
-#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */
-#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */
-#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */
-#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */
-
-
-
+#define MX1_MMA_MAC_YINDEX __REG(0x00222304) /* MMA MAC Y Index Register */
+#define MX1_MMA_MAC_YLENGTH __REG(0x00222308) /* MMA MAC Y Length Register */
+#define MX1_MMA_MAC_YMODIFY __REG(0x0022230C) /* MMA MAC Y Modify Register */
+#define MX1_MMA_MAC_YINCR __REG(0x00222310) /* MMA MAC Y Increment Register */
+#define MX1_MMA_MAC_YCOUNT __REG(0x00222314) /* MMA MAC Y Count Register */
+
+#define MX1_MMA_DCTCTRL __REG(0x00222400) /* DCT/iDCT Control Register */
+#define MX1_MMA_DCTVERSION __REG(0x00222404) /* DCT/iDCT Version Register */
+#define MX1_MMA_DCTIRQENA __REG(0x00222408) /* DCT/iDCT IRQ Enable Register */
+#define MX1_MMA_DCTIRQSTAT __REG(0x0022240C) /* DCT/iDCT IRQ Status Register */
+#define MX1_MMA_DCTSRCDATA __REG(0x00222410) /* DCT/iDCT Source Data Address */
+#define MX1_MMA_DCTDESDATA __REG(0x00222414) /* DCT/iDCT Destination Data Address */
+#define MX1_MMA_DCTXOFF __REG(0x00222418) /* DCT/iDCT X-Offset Address */
+#define MX1_MMA_DCTYOFF __REG(0x0022241C) /* DCT/iDCT Y-Offset Address */
+#define MX1_MMA_DCTXYCNT __REG(0x00222420) /* DCT/iDCT XY Count */
+#define MX1_MMA_DCTSKIP __REG(0x00222424) /* DCT/iDCT Skip Address */
+#define MX1_MMA_DCTFIFO __REG(0x00222500) /* DCT/iDCT Data FIFO */
/*
* MX1 AITC registers
*/
-
-#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */
-#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */
-#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */
-#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */
-#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */
-#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */
-#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */
-#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */
-#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/
-#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/
-#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/
-#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/
-#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/
-#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/
-#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/
-#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/
+#define MX1_INTCNTL __REG(0x00223000) /* Interrupt Control Register */
+#define MX1_NIMASK __REG(0x00223004) /* Normal Interrupt Mask Register */
+#define MX1_INTENNUM __REG(0x00223008) /* Interrupt Enable Number Register */
+#define MX1_INTDISNUM __REG(0x0022300C) /* Interrupt Disable Number Register */
+#define MX1_INTENABLEH __REG(0x00223010) /* Interrupt Enable Register High */
+#define MX1_INTENABLEL __REG(0x00223014) /* Interrupt Enable Register Low */
+#define MX1_INTTYPEH __REG(0x00223018) /* Interrupt Type Register High */
+#define MX1_INTTYPEL __REG(0x0022301C) /* Interrupt Type Register Low */
+#define MX1_NIPRIORITY7 __REG(0x00223020) /* Normal Interrupt Priority Level Register 7*/
+#define MX1_NIPRIORITY6 __REG(0x00223024) /* Normal Interrupt Priority Level Register 6*/
+#define MX1_NIPRIORITY5 __REG(0x00223028) /* Normal Interrupt Priority Level Register 5*/
+#define MX1_NIPRIORITY4 __REG(0x0022302C) /* Normal Interrupt Priority Level Register 4*/
+#define MX1_NIPRIORITY3 __REG(0x00223030) /* Normal Interrupt Priority Level Register 3*/
+#define MX1_NIPRIORITY2 __REG(0x00223034) /* Normal Interrupt Priority Level Register 2*/
+#define MX1_NIPRIORITY1 __REG(0x00223038) /* Normal Interrupt Priority Level Register 1*/
+#define MX1_NIPRIORITY0 __REG(0x0022303C) /* Normal Interrupt Priority Level Register 0*/
#define MX1_NIVECSR __REG(0x00223040) /* Normal Interrupt Vector & Status Register */
#define MX1_FIVECSR __REG(0x00223044) /* Fast Interrupt Vector & Status Register */
-#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */
-#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */
-#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */
-#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */
-#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */
-#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */
-#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */
-#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */
-
+#define MX1_INTSRCH __REG(0x00223048) /* Interrupt Source Register High */
+#define MX1_INTSRCL __REG(0x0022304C) /* Interrupt Source Register Low */
+#define MX1_INTFRCH __REG(0x00223050) /* Interrupt Force Register High */
+#define MX1_INTFRCL __REG(0x00223054) /* Interrupt Force Register Low */
+#define MX1_NIPNDH __REG(0x00223058) /* Normal Interrupt Pending Register High */
+#define MX1_NIPNDL __REG(0x0022305C) /* Normal Interrupt Pending Register Low */
+#define MX1_FIPNDH __REG(0x00223060) /* Fast Interrupt Pending Register High */
+#define MX1_FIPNDL __REG(0x00223064) /* Fast Interrupt Pending Register Low */
/*
* MX1 CSI registers
*/
-
-#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */
-#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */
-#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */
+#define MX1_CSICR1 __REG(0x00224000) /* CSI Control Register 1 */
+#define MX1_CSICR2 __REG(0x00224004) /* CSI Control Register 2 */
+#define MX1_CSISR __REG(0x00224008) /* CSI Status Register 1 */
#define MX1_CSISTATR __REG(0x0022400C) /* CSI Statistic FIFO Register 1 */
#define MX1_CSIRXR __REG(0x00224010) /* CSI RxFIFO Register 1 */
-
-
#endif /* __MC9328_H__ */
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
#if 0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
/*
- MX1 dma definition
+ MX1 dma definition
*/
#define MAX_DMA_ADDRESS 0xffffffff
-//#define MAX_DMA_CHANNELS 0
+/*#define MAX_DMA_CHANNELS 0 */
-#define MAX_DMA_CHANNELS 11
+#define MAX_DMA_CHANNELS 11
#define MAX_DMA_2D_REGSET 2
/* MX1 DMA module registers' address */
-#define MX1_DMA_BASE IO_ADDRESS(0x00209000)
-#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) // DMA control register
-#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) // DMA interrupt status register
-#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) // DMA interrupt mask register
-#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) // DMA burst time-out status register
-#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) // DMA request time-out status register
-#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) // DMA transfer error status register
-#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) // DMA buffer overflow status register
-#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) // DMA burst time-out control register
-#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) // W-size register A
-#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) // X-size register A
-#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) // Y-size register A
-#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) // W-size register B
-#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) // X-size register B
-#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) // Y-size register B
-
-#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) // source address register 0
-#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) // destination address register 0
-#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) // count register 0
-#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) // channel control register 0
-#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) // request source select register 0
-#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) // burst length register 0
-#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) // request time-out register 0
-#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) // bus utilization control register 0
+#define MX1_DMA_BASE IO_ADDRESS(0x00209000)
+#define MX1_DMA_DCR (MX1_DMA_BASE + 0x00) /* DMA control register */
+#define MX1_DMA_DISR (MX1_DMA_BASE + 0x04) /* DMA interrupt status register */
+#define MX1_DMA_DIMR (MX1_DMA_BASE + 0x08) /* DMA interrupt mask register */
+#define MX1_DMA_DBTOSR (MX1_DMA_BASE + 0x0C) /* DMA burst time-out status register */
+#define MX1_DMA_DRTOSR (MX1_DMA_BASE + 0x10) /* DMA request time-out status register */
+#define MX1_DMA_DSESR (MX1_DMA_BASE + 0x14) /* DMA transfer error status register */
+#define MX1_DMA_DBOSR (MX1_DMA_BASE + 0x18) /* DMA buffer overflow status register */
+#define MX1_DMA_DBTOCR (MX1_DMA_BASE + 0x1C) /* DMA burst time-out control register */
+#define MX1_DMA_WSRA (MX1_DMA_BASE + 0x40) /* W-size register A */
+#define MX1_DMA_XSRA (MX1_DMA_BASE + 0x44) /* X-size register A */
+#define MX1_DMA_YSRA (MX1_DMA_BASE + 0x48) /* Y-size register A */
+#define MX1_DMA_WSRB (MX1_DMA_BASE + 0x4C) /* W-size register B */
+#define MX1_DMA_XSRB (MX1_DMA_BASE + 0x50) /* X-size register B */
+#define MX1_DMA_YSRB (MX1_DMA_BASE + 0x54) /* Y-size register B */
+
+#define MX1_DMA_SAR0 (MX1_DMA_BASE + 0x80) /* source address register 0 */
+#define MX1_DMA_DAR0 (MX1_DMA_BASE + 0x84) /* destination address register 0 */
+#define MX1_DMA_CNTR0 (MX1_DMA_BASE + 0x88) /* count register 0 */
+#define MX1_DMA_CCR0 (MX1_DMA_BASE + 0x8C) /* channel control register 0 */
+#define MX1_DMA_RSSR0 (MX1_DMA_BASE + 0x90) /* request source select register 0 */
+#define MX1_DMA_BLR0 (MX1_DMA_BASE + 0x94) /* burst length register 0 */
+#define MX1_DMA_RTOR0 (MX1_DMA_BASE + 0x98) /* request time-out register 0 */
+#define MX1_DMA_BUCR0 (MX1_DMA_BASE + 0x98) /* bus utilization control register 0 */
/* register set 1 to 10 are offseted by 0x40 each = 0x10 pointers away */
-#define DMA_REG_SET_OFS 0x10
-
+#define DMA_REG_SET_OFS 0x10
/* MX1 DMA module registers */
-#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR))
-#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR))
-#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR))
-#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR))
-#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR))
-#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR))
-#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR))
-#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR))
-#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA))
-#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA))
-#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA))
-#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB))
-#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB))
-#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB))
-#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0))
-#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0))
-#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0))
-#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0))
-#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0))
-#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0))
-#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0))
-#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0))
+#define _reg_DMA_DCR (*((P_VU32)MX1_DMA_DCR))
+#define _reg_DMA_DISR (*((P_VU32)MX1_DMA_DISR))
+#define _reg_DMA_DIMR (*((P_VU32)MX1_DMA_DIMR))
+#define _reg_DMA_DBTOSR (*((P_VU32)MX1_DMA_DBTOSR))
+#define _reg_DMA_DRTOSR (*((P_VU32)MX1_DMA_DRTOSR))
+#define _reg_DMA_DSESR (*((P_VU32)MX1_DMA_DSESR))
+#define _reg_DMA_DBOSR (*((P_VU32)MX1_DMA_DBOSR))
+#define _reg_DMA_DBTOCR (*((P_VU32)MX1_DMA_DBTOCR))
+#define _reg_DMA_WSRA (*((P_VU32)MX1_DMA_WSRA))
+#define _reg_DMA_XSRA (*((P_VU32)MX1_DMA_XSRA))
+#define _reg_DMA_YSRA (*((P_VU32)MX1_DMA_YSRA))
+#define _reg_DMA_WSRB (*((P_VU32)MX1_DMA_WSRB))
+#define _reg_DMA_XSRB (*((P_VU32)MX1_DMA_XSRB))
+#define _reg_DMA_YSRB (*((P_VU32)MX1_DMA_YSRB))
+#define _reg_DMA_SAR0 (*((P_VU32)MX1_DMA_SAR0))
+#define _reg_DMA_DAR0 (*((P_VU32)MX1_DMA_DAR0))
+#define _reg_DMA_CNTR0 (*((P_VU32)MX1_DMA_CNTR0))
+#define _reg_DMA_CCR0 (*((P_VU32)MX1_DMA_CCR0))
+#define _reg_DMA_RSSR0 (*((P_VU32)MX1_DMA_RSSR0))
+#define _reg_DMA_BLR0 (*((P_VU32)MX1_DMA_BLR0))
+#define _reg_DMA_RTOR0 (*((P_VU32)MX1_DMA_RTOR0))
+#define _reg_DMA_BUCR0 (*((P_VU32)MX1_DMA_BUCR0))
/* DMA error type definition */
-#define MX1_DMA_ERR_BTO 0 // burst time-out
-#define MX1_DMA_ERR_RTO 1 // request time-out
-#define MX1_DMA_ERR_TE 2 // transfer error
-#define MX1_DMA_ERR_BO 3 // buffer overflow
-
+#define MX1_DMA_ERR_BTO 0 /* burst time-out */
+#define MX1_DMA_ERR_RTO 1 /* request time-out */
+#define MX1_DMA_ERR_TE 2 /* transfer error */
+#define MX1_DMA_ERR_BO 3 /* buffer overflow */
/* Embedded SRAM */
#define MX1_SRAM_BASE 0x00300000
#define MX1_SRAM_SIZE 0x00020000
-#define
-
+#define
-#define MX1ADS_SFLASH_BASE 0x0C000000
-#define MX1ADS_SFLASH_SIZE SZ_16M
+#define MX1ADS_SFLASH_BASE 0x0C000000
+#define MX1ADS_SFLASH_SIZE SZ_16M
-#define MX1ADS_IO_BASE 0x00200000
-#define MX1ADS_IO_SIZE SZ_256K
+#define MX1ADS_IO_BASE 0x00200000
+#define MX1ADS_IO_SIZE SZ_256K
-#define MX1ADS_VID_BASE 0x00300000
-#define MX1ADS_VID_SIZE 0x26000
+#define MX1ADS_VID_BASE 0x00300000
+#define MX1ADS_VID_SIZE 0x26000
-#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE)
+#define MX1ADS_VID_START IO_ADDRESS(MX1ADS_VID_BASE)
-#define MX1_GPIO_BASE 0x0021C000 // GPIO
-#define MX1_EXT_UART_BASE 0x15000000 // external UART
-#define MX1_TMR1_BASE 0x00202000 // Timer1
-#define MX1ADS_FLASH_BASE 0x0C000000 // sync FLASH
-#define MX1_ESRAM_BASE 0x00300000 // embedded SRAM
-#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 // SDRAM disk base (last 16M of SDRAM)
+#define MX1_GPIO_BASE 0x0021C000 /* GPIO */
+#define MX1_EXT_UART_BASE 0x15000000 /* external UART */
+#define MX1_TMR1_BASE 0x00202000 /* Timer1 */
+#define MX1ADS_FLASH_BASE 0x0C000000 /* sync FLASH */
+#define MX1_ESRAM_BASE 0x00300000 /* embedded SRAM */
+#define MX1ADS_SDRAM_DISK_BASE 0x0B000000 /* SDRAM disk base (last 16M of SDRAM) */
/* ------------------------------------------------------------------------
* Motorola MX1 system registers
@@ -1074,148 +911,141 @@ typedef VU32 * P_VU32;
*
*/
-#define MX1ADS_AIPI1_OFFSET 0x00000
-#define MX1ADS_WDT_OFFSET 0x01000
-#define MX1ADS_TIM1_OFFSET 0x02000
-#define MX1ADS_TIM2_OFFSET 0x03000
-#define MX1ADS_RTC_OFFSET 0x04000
-#define MX1ADS_LCDC_OFFSET 0x05000
-#define MX1ADS_UART1_OFFSET 0x06000
-#define MX1ADS_UART2_OFFSET 0x07000
-#define MX1ADS_PWM_OFFSET 0x08000
-#define MX1ADS_DMAC_OFFSET 0x09000
-#define MX1ADS_AIPI2_OFFSET 0x10000
-#define MX1ADS_SIM_OFFSET 0x11000
-#define MX1ADS_USBD_OFFSET 0x12000
-#define MX1ADS_SPI1_OFFSET 0x13000
-#define MX1ADS_MMC_OFFSET 0x14000
-#define MX1ADS_ASP_OFFSET 0x15000
-#define MX1ADS_BTA_OFFSET 0x16000
-#define MX1ADS_I2C_OFFSET 0x17000
-#define MX1ADS_SSI_OFFSET 0x18000
-#define MX1ADS_SPI2_OFFSET 0x19000
-#define MX1ADS_MSHC_OFFSET 0x1A000
-#define MX1ADS_PLL_OFFSET 0x1B000
-#define MX1ADS_GPIO_OFFSET 0x1C000
-#define MX1ADS_EIM_OFFSET 0x20000
-#define MX1ADS_SDRAMC_OFFSET 0x21000
-#define MX1ADS_MMA_OFFSET 0x22000
-#define MX1ADS_AITC_OFFSET 0x23000
-#define MX1ADS_CSI_OFFSET 0x24000
-
+#define MX1ADS_AIPI1_OFFSET 0x00000
+#define MX1ADS_WDT_OFFSET 0x01000
+#define MX1ADS_TIM1_OFFSET 0x02000
+#define MX1ADS_TIM2_OFFSET 0x03000
+#define MX1ADS_RTC_OFFSET 0x04000
+#define MX1ADS_LCDC_OFFSET 0x05000
+#define MX1ADS_UART1_OFFSET 0x06000
+#define MX1ADS_UART2_OFFSET 0x07000
+#define MX1ADS_PWM_OFFSET 0x08000
+#define MX1ADS_DMAC_OFFSET 0x09000
+#define MX1ADS_AIPI2_OFFSET 0x10000
+#define MX1ADS_SIM_OFFSET 0x11000
+#define MX1ADS_USBD_OFFSET 0x12000
+#define MX1ADS_SPI1_OFFSET 0x13000
+#define MX1ADS_MMC_OFFSET 0x14000
+#define MX1ADS_ASP_OFFSET 0x15000
+#define MX1ADS_BTA_OFFSET 0x16000
+#define MX1ADS_I2C_OFFSET 0x17000
+#define MX1ADS_SSI_OFFSET 0x18000
+#define MX1ADS_SPI2_OFFSET 0x19000
+#define MX1ADS_MSHC_OFFSET 0x1A000
+#define MX1ADS_PLL_OFFSET 0x1B000
+#define MX1ADS_GPIO_OFFSET 0x1C000
+#define MX1ADS_EIM_OFFSET 0x20000
+#define MX1ADS_SDRAMC_OFFSET 0x21000
+#define MX1ADS_MMA_OFFSET 0x22000
+#define MX1ADS_AITC_OFFSET 0x23000
+#define MX1ADS_CSI_OFFSET 0x24000
/*
* Register BASEs, based on OFFSETs
*
*/
-#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE)
-#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE)
-
+#define MX1ADS_AIPI1_BASE (MX1ADS_AIPI1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_WDT_BASE (MX1ADS_WDT_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_TIM1_BASE (MX1ADS_TIM1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_TIM2_BASE (MX1ADS_TIM2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_RTC_BASE (MX1ADS_RTC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_LCDC_BASE (MX1ADS_LCDC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_UART1_BASE (MX1ADS_UART1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_UART2_BASE (MX1ADS_UART2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_PWM_BASE (MX1ADS_PWM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_DMAC_BASE (MX1ADS_DMAC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_AIPI2_BASE (MX1ADS_AIPI2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SIM_BASE (MX1ADS_SIM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_USBD_BASE (MX1ADS_USBD_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SPI1_BASE (MX1ADS_SPI1_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MMC_BASE (MX1ADS_MMC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_ASP_BASE (MX1ADS_ASP_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_BTA_BASE (MX1ADS_BTA_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_I2C_BASE (MX1ADS_I2C_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SSI_BASE (MX1ADS_SSI_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SPI2_BASE (MX1ADS_SPI2_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MSHC_BASE (MX1ADS_MSHC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_PLL_BASE (MX1ADS_PLL_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_GPIO_BASE (MX1ADS_GPIO_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_EIM_BASE (MX1ADS_EIM_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_SDRAMC_BASE (MX1ADS_SDRAMC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_MMA_BASE (MX1ADS_MMA_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_AITC_BASE (MX1ADS_AITC_OFFSET + MX1ADS_IO_BASE)
+#define MX1ADS_CSI_BASE (MX1ADS_CSI_OFFSET + MX1ADS_IO_BASE)
/*
* MX1 Interrupt numbers
*
*/
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIMER2_INT 58
-#define TIMER1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-
-#define TICKS_PER_uSEC 24
+#define INT_SOFTINT 0
+#define CSI_INT 6
+#define DSPA_MAC_INT 7
+#define DSPA_INT 8
+#define COMP_INT 9
+#define MSHC_XINT 10
+#define GPIO_INT_PORTA 11
+#define GPIO_INT_PORTB 12
+#define GPIO_INT_PORTC 13
+#define LCDC_INT 14
+#define SIM_INT 15
+#define SIM_DATA_INT 16
+#define RTC_INT 17
+#define RTC_SAMINT 18
+#define UART2_MINT_PFERR 19
+#define UART2_MINT_RTS 20
+#define UART2_MINT_DTR 21
+#define UART2_MINT_UARTC 22
+#define UART2_MINT_TX 23
+#define UART2_MINT_RX 24
+#define UART1_MINT_PFERR 25
+#define UART1_MINT_RTS 26
+#define UART1_MINT_DTR 27
+#define UART1_MINT_UARTC 28
+#define UART1_MINT_TX 29
+#define UART1_MINT_RX 30
+#define VOICE_DAC_INT 31
+#define VOICE_ADC_INT 32
+#define PEN_DATA_INT 33
+#define PWM_INT 34
+#define SDHC_INT 35
+#define I2C_INT 39
+#define CSPI_INT 41
+#define SSI_TX_INT 42
+#define SSI_TX_ERR_INT 43
+#define SSI_RX_INT 44
+#define SSI_RX_ERR_INT 45
+#define TOUCH_INT 46
+#define USBD_INT0 47
+#define USBD_INT1 48
+#define USBD_INT2 49
+#define USBD_INT3 50
+#define USBD_INT4 51
+#define USBD_INT5 52
+#define USBD_INT6 53
+#define BTSYS_INT 55
+#define BTTIM_INT 56
+#define BTWUI_INT 57
+#define TIMER2_INT 58
+#define TIMER1_INT 59
+#define DMA_ERR 60
+#define DMA_INT 61
+#define GPIO_INT_PORTD 62
+
+#define MAXIRQNUM 62
+#define MAXFIQNUM 62
+#define MAXSWINUM 62
+
+#define TICKS_PER_uSEC 24
/*
* These are useconds NOT ticks.
*
*/
-#define mSEC_1 1000
-#define mSEC_5 (mSEC_1 * 5)
-#define mSEC_10 (mSEC_1 * 10)
-#define mSEC_25 (mSEC_1 * 25)
-#define SEC_1 (mSEC_1 * 1000)
-
-
-#endif
-
+#define mSEC_1 1000
+#define mSEC_5 (mSEC_1 * 5)
+#define mSEC_10 (mSEC_1 * 10)
+#define mSEC_25 (mSEC_1 * 25)
+#define SEC_1 (mSEC_1 * 1000)
+#endif