diff options
-rw-r--r-- | common/cmd_spi.c | 40 | ||||
-rw-r--r-- | drivers/mtd/spi/spansion.c | 16 | ||||
-rw-r--r-- | drivers/mtd/spi/winbond.c | 9 |
3 files changed, 46 insertions, 19 deletions
diff --git a/common/cmd_spi.c b/common/cmd_spi.c index bafa217d039..8c623c9fcf5 100644 --- a/common/cmd_spi.c +++ b/common/cmd_spi.c @@ -47,7 +47,9 @@ /* * Values from last command. */ -static unsigned int device; +static unsigned int bus; +static unsigned int cs; +static unsigned int mode; static int bitlen; static uchar dout[MAX_SPI_BYTES]; static uchar din[MAX_SPI_BYTES]; @@ -78,8 +80,18 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if ((flag & CMD_FLAG_REPEAT) == 0) { - if (argc >= 2) - device = simple_strtoul(argv[1], NULL, 10); + if (argc >= 2) { + mode = CONFIG_DEFAULT_SPI_MODE; + bus = simple_strtoul(argv[1], &cp, 10); + if (*cp == ':') { + cs = simple_strtoul(cp+1, &cp, 10); + } else { + cs = bus; + bus = CONFIG_DEFAULT_SPI_BUS; + } + if (*cp == '.'); + mode = simple_strtoul(cp+1, NULL, 10); + } if (argc >= 3) bitlen = simple_strtoul(argv[2], NULL, 10); if (argc >= 4) { @@ -91,7 +103,7 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if(tmp > 15) tmp -= ('a' - 'A'); if(tmp > 15) { - printf("Hex conversion error on %c, giving up.\n", *cp); + printf("Hex conversion error on %c\n", *cp); return 1; } if((j % 2) == 0) @@ -103,24 +115,20 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) { - printf("Invalid bitlen %d, giving up.\n", bitlen); + printf("Invalid bitlen %d\n", bitlen); return 1; } - /* FIXME: Make these parameters run-time configurable */ - slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, device, 1000000, - CONFIG_DEFAULT_SPI_MODE); + slave = spi_setup_slave(bus, cs, 1000000, mode); if (!slave) { - printf("Invalid device %d, giving up.\n", device); + printf("Invalid device %d:%d\n", bus, cs); return 1; } - debug ("spi chipsel = %08X\n", device); - spi_claim_bus(slave); if(spi_xfer(slave, bitlen, dout, din, SPI_XFER_BEGIN | SPI_XFER_END) != 0) { - printf("Error with the SPI transaction.\n"); + printf("Error during SPI transaction\n"); rcode = 1; } else { for(j = 0; j < ((bitlen + 7) / 8); j++) { @@ -138,9 +146,11 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( sspi, 5, 1, do_spi, - "SPI utility commands", - "<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n" - "<device> - Identifies the chip select of the device\n" + "SPI utility command", + "[<bus>:]<cs>[.<mode>] <bit_len> <dout> - Send and receive bits\n" + "<bus> - Identifies the SPI bus\n" + "<cs> - Identifies the chip select\n" + "<mode> - Identifies the SPI mode to use\n" "<bit_len> - Number of bits to send (base 10)\n" "<dout> - Hexadecimal string that gets sent" ); diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index d6c1a5f9d3a..c0900f978f2 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -52,6 +52,7 @@ #define SPSN_ID_S25FL128P 0x2018 #define SPSN_EXT_ID_S25FL128P_256KB 0x0300 #define SPSN_EXT_ID_S25FL128P_64KB 0x0301 +#define SPSN_EXT_ID_S25FL032P 0x4d00 #define SPANSION_SR_WIP (1 << 0) /* Write-in-Progress */ @@ -124,6 +125,14 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { .nr_sectors = 64, .name = "S25FL128P_256K", }, + { + .idcode1 = SPSN_ID_S25FL032A, + .idcode2 = SPSN_EXT_ID_S25FL032P, + .page_size = 256, + .pages_per_sector = 256, + .nr_sectors = 64, + .name = "S25FL032P", + }, }; static int spansion_wait_ready(struct spi_flash *flash, unsigned long timeout) @@ -262,7 +271,6 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) return -1; } - len /= sector_size; cmd[0] = CMD_S25FLXX_SE; cmd[2] = 0x00; cmd[3] = 0x00; @@ -274,8 +282,8 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) } ret = 0; - for (actual = 0; actual < len; actual++) { - cmd[1] = (offset / sector_size) + actual; + for (actual = 0; actual < len; actual += sector_size) { + cmd[1] = (offset + actual) >> 16; ret = spi_flash_cmd(flash->spi, CMD_S25FLXX_WREN, NULL, 0); if (ret < 0) { @@ -298,7 +306,7 @@ int spansion_erase(struct spi_flash *flash, u32 offset, size_t len) } debug("SF: SPANSION: Successfully erased %u bytes @ 0x%x\n", - len * sector_size, offset); + len, offset); spi_release_bus(flash->spi); return ret; diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index ff1df25a1df..de3aeb810a6 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -27,6 +27,7 @@ #define WINBOND_ID_W25X16 0x3015 #define WINBOND_ID_W25X32 0x3016 #define WINBOND_ID_W25X64 0x3017 +#define WINBOND_ID_W25Q64 0x4017 #define WINBOND_SR_WIP (1 << 0) /* Write-in-Progress */ @@ -77,6 +78,14 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { .nr_blocks = 128, .name = "W25X64", }, + { + .id = WINBOND_ID_W25Q64, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 128, + .name = "W25Q64", + }, }; static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout) |