summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG6
-rw-r--r--MAKEALL26
-rw-r--r--Makefile3
-rw-r--r--board/csb272/Makefile51
-rw-r--r--board/csb272/config.mk36
-rw-r--r--board/csb272/csb272.c174
-rw-r--r--board/csb272/init.S216
-rw-r--r--board/csb272/u-boot.lds151
-rw-r--r--board/modnet50/flash.c4
-rw-r--r--board/modnet50/u-boot.lds30
-rw-r--r--common/cmd_ace.c7
-rw-r--r--common/cmd_itest.c14
-rw-r--r--common/usb.c37
-rw-r--r--cpu/arm720t/interrupts.c18
-rw-r--r--doc/README.commands.itest8
-rw-r--r--doc/README.modnet5016
-rw-r--r--drivers/netarm_eth.c3
-rw-r--r--include/asm-arm/arch-arm720t/netarm_dma_module.h4
-rw-r--r--include/asm-arm/arch-arm720t/netarm_gen_module.h86
-rw-r--r--include/asm-arm/arch-arm720t/netarm_mem_module.h1
-rw-r--r--include/asm-arm/arch-arm720t/netarm_registers.h1
-rw-r--r--include/bmp_logo.h2
-rw-r--r--include/configs/csb272.h313
-rw-r--r--net/tftp.c8
24 files changed, 1090 insertions, 125 deletions
diff --git a/CHANGELOG b/CHANGELOG
index b6eaa89148f..13516dea512 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
Changes for U-Boot 1.0.2:
======================================================================
+* Patch by Laurent Mohin, 10 Feb 2004:
+ Fix buffer overflow in common/usb.c
+
+* Patch by Tolunay Orkun, 10 Feb 2004:
+ Add support for Cogent CSB272 board
+
* Patch by Thomas Elste, 10 Feb 2004:
Add support for NET+50 CPU and ModNET50 board
diff --git a/MAKEALL b/MAKEALL
index c8dfb67d3af..0705488f9f6 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -40,7 +40,7 @@ LIST_8xx=" \
GEN860T_SC GENIETV GTH hermes \
IAD210 ICU862_100MHz IP860 IVML24 \
IVML24_128 IVML24_256 IVMS8 IVMS8_128 \
- IVMS8_256 KUP4K LANTEC lwmon \
+ IVMS8_256 KUP4K LANTEC lwmon \
MBX MBX860T MHPC MPC86xADS \
MVS1 NETVIA NETVIA_V2 NX823 \
pcu_e QS823 QS850 QS860T \
@@ -56,15 +56,15 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
- ADCIOP AR405 ASH405 BUBINGA405EP \
- CANBT CPCI405 CPCI4052 CPCI405AB \
- CPCI440 CPCIISER4 CRAYL1 DASA_SIM \
- DP405 DU405 EBONY ERIC \
- EXBITGEN HUB405 MIP405 MIP405T \
- ML2 OCRTC ORSG PCI405 \
- PIP405 PLU405 PMC405 PPChameleonEVB \
- VOH405 W7OLMC W7OLMG WALNUT405 \
- XPEDITE1K \
+ ADCIOP AR405 ASH405 BUBINGA405EP \
+ CANBT CPCI405 CPCI4052 CPCI405AB \
+ CPCI440 CPCIISER4 CRAYL1 csb272 \
+ DASA_SIM DP405 DU405 EBONY \
+ ERIC EXBITGEN HUB405 MIP405 \
+ MIP405T ML2 OCRTC ORSG \
+ PCI405 PIP405 PLU405 PMC405 \
+ PPChameleonEVB VOH405 W7OLMC W7OLMG \
+ WALNUT405 XPEDITE1K \
"
#########################################################################
@@ -72,9 +72,9 @@ LIST_4xx=" \
#########################################################################
LIST_824x=" \
- A3000 BMW CPC45 CU824 \
- debris MOUSSE MUSENKI MVBLUE \
- OXC PN62 Sandpoint8240 Sandpoint8245 \
+ A3000 BMW CPC45 CU824 \
+ debris MOUSSE MUSENKI MVBLUE \
+ OXC PN62 Sandpoint8240 Sandpoint8245 \
SL8245 utx8245 \
"
diff --git a/Makefile b/Makefile
index 3525d87dbd5..1520f57408e 100644
--- a/Makefile
+++ b/Makefile
@@ -558,6 +558,9 @@ CPCIISER4_config: unconfig
CRAYL1_config:unconfig
@./mkconfig $(@:_config=) ppc ppc4xx L1 cray
+csb272_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx csb272
+
DASA_SIM_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
diff --git a/board/csb272/Makefile b/board/csb272/Makefile
new file mode 100644
index 00000000000..926e0650328
--- /dev/null
+++ b/board/csb272/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+#OBJS = $(BOARD).o flash.o
+#OBJS = $(BOARD).o strataflash.o
+OBJS = $(BOARD).o
+
+SOBJS = init.o
+
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $^
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/csb272/config.mk b/board/csb272/config.mk
new file mode 100644
index 00000000000..4672f08172a
--- /dev/null
+++ b/board/csb272/config.mk
@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004
+# Tolunay Orkun, NextIO Inc., torkun@nextio.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Cogent CSB272 board
+#
+
+LDFLAGS += $(LINKER_UNDEFS)
+
+TEXT_BASE := 0xFFFC0000
+#TEXT_BASE := 0x00100000
+
+PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
diff --git a/board/csb272/csb272.c b/board/csb272/csb272.c
new file mode 100644
index 00000000000..0604189be7f
--- /dev/null
+++ b/board/csb272/csb272.c
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2004
+ * Tolunay Orkun, Nextio Inc., torkun@nextio.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/u-boot.h>
+#include <asm/processor.h>
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <405gp_enet.h>
+
+/*
+ * Configuration data for AMIS FS6377-01 Programmable 3-PLL Clock Generator
+ *
+ * CLKA output => Epson LCD Controller
+ * CLKB output => Not Connected
+ * CLKC output => Ethernet
+ * CLKD output => UART external clock
+ *
+ * Note: these values are obtained from device after init by micromonitor
+*/
+uchar pll_fs6377_regs[16] = {
+ 0x28, 0xef, 0x53, 0x03, 0x4b, 0x80, 0x32, 0x80,
+ 0x94, 0x32, 0x80, 0xd4, 0x56, 0xf6, 0xf6, 0xe0 };
+
+/*
+ * pll_init: Initialize AMIS IC FS6377-01 PLL
+ *
+ * PLL supplies Epson LCD Clock, Ethernet Clock and UART external clock
+ *
+ */
+int pll_init(void)
+{
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ return i2c_write(CFG_I2C_PLL_ADDR, 0, 1,
+ (uchar *) pll_fs6377_regs, sizeof(pll_fs6377_regs));
+}
+
+/*
+ * board_pre_init: do any preliminary board initialization
+ *
+ */
+int board_pre_init(void)
+{
+ /* initialize PLL so UART, LCD, Ethernet clocked at correctly */
+ (void) get_clocks();
+ pll_init();
+
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the Walnut board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED
+ | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+ | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+ | IRQ 27 (EXT IRQ 2) Not Used
+ | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+ | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+ | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+ | Note for Walnut board:
+ | An interrupt taken for the FPGA (IRQ 25) indicates that either
+ | the Mouse, Keyboard, IRDA, or External Expansion caused the
+ | interrupt. The FPGA must be read to determine which device
+ | caused the interrupt. The default setting of the FPGA clears
+ |
+ +-------------------------------------------------------------------------*/
+
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (uicer, 0x00000000); /* disable all ints */
+ mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
+ mtdcr (uicpr, 0xFFFFFF83); /* set int polarities */
+ mtdcr (uictr, 0x10000000); /* set int trigger levels */
+ mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ mtebc (epcr, 0xa8400000); /* EBC always driven */
+
+ return 0; /* success */
+}
+
+/*
+ * checkboard: identify/verify the board we are running
+ *
+ * Remark: we just assume it is correct board here!
+ *
+ */
+int checkboard(void)
+{
+ printf("BOARD: Cogent CSB272\n");
+
+ return 0; /* success */
+}
+
+/*
+ * initram: Determine the size of mounted DRAM
+ *
+ * Size is determined by reading SDRAM configuration registers as
+ * configured by initialization code
+ *
+ */
+long initdram (int board_type)
+{
+ ulong tot_size;
+ ulong bank_size;
+ ulong tmp;
+
+ tot_size = 0;
+
+ mtdcr (memcfga, mem_mb0cf);
+ tmp = mfdcr (memcfgd);
+ if (tmp & 0x00000001) {
+ bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+ tot_size += bank_size;
+ }
+
+ mtdcr (memcfga, mem_mb1cf);
+ tmp = mfdcr (memcfgd);
+ if (tmp & 0x00000001) {
+ bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+ tot_size += bank_size;
+ }
+
+ mtdcr (memcfga, mem_mb2cf);
+ tmp = mfdcr (memcfgd);
+ if (tmp & 0x00000001) {
+ bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+ tot_size += bank_size;
+ }
+
+ mtdcr (memcfga, mem_mb3cf);
+ tmp = mfdcr (memcfgd);
+ if (tmp & 0x00000001) {
+ bank_size = 0x00400000 << ((tmp >> 17) & 0x7);
+ tot_size += bank_size;
+ }
+
+ return tot_size;
+}
+
+/*
+ * last_stage_init: final configurations (such as PHY etc)
+ *
+ */
+int last_stage_init(void)
+{
+ /* initialize the PHY */
+ miiphy_reset(CONFIG_PHY_ADDR);
+ miiphy_write(CONFIG_PHY_ADDR, PHY_BMCR,
+ PHY_BMCR_AUTON | PHY_BMCR_RST_NEG); /* AUTO neg */
+ miiphy_write(CONFIG_PHY_ADDR, PHY_FCSCR, 0x0d08); /* LEDs */
+
+ return 0; /* success */
+}
diff --git a/board/csb272/init.S b/board/csb272/init.S
new file mode 100644
index 00000000000..e00ebf89c15
--- /dev/null
+++ b/board/csb272/init.S
@@ -0,0 +1,216 @@
+/******************************************************************************
+ *
+ * This source code has been made available to you by IBM on an AS-IS
+ * basis. Anyone receiving this source is licensed under IBM
+ * copyrights to use it in any way he or she deems fit, including
+ * copying it, modifying it, compiling it, and redistributing it either
+ * with or without modifications. No license under IBM patents or
+ * patent applications is to be implied by the copyright license.
+ *
+ * Any user of this software should understand that IBM cannot provide
+ * technical support for this software and will not be responsible for
+ * any consequences resulting from the use of this software.
+ *
+ * Any person who transfers this source code or any derivative work
+ * must include the IBM copyright notice, this paragraph, and the
+ * preceding two paragraphs in the transferred software.
+ *
+ * COPYRIGHT I B M CORPORATION 1995
+ * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
+ *
+ *****************************************************************************/
+#include <config.h>
+#include <ppc4xx.h>
+
+#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define LI32(reg,val) \
+ addis reg,0,val@h;\
+ ori reg,reg,val@l
+
+#define WDCR_EBC(reg,val) \
+ addi r4,0,reg;\
+ mtdcr ebccfga,r4;\
+ addis r4,0,val@h;\
+ ori r4,r4,val@l;\
+ mtdcr ebccfgd,r4
+
+#define WDCR_SDRAM(reg,val) \
+ addi r4,0,reg;\
+ mtdcr memcfga,r4;\
+ addis r4,0,val@h;\
+ ori r4,r4,val@l;\
+ mtdcr memcfgd,r4
+
+/******************************************************************************
+ * Function: ext_bus_cntlr_init
+ *
+ * Description: Configures EBC Controller and a few basic chip selects.
+ *
+ * CS0 is setup to get the Boot Flash out of the addresss range
+ * so that we may setup a stack. CS7 is setup so that we can
+ * access and reset the hardware watchdog.
+ *
+ * IMPORTANT: For pass1 this code must run from
+ * cache since you can not reliably change a peripheral banks
+ * timing register (pbxap) while running code from that bank.
+ * For ex., since we are running from ROM on bank 0, we can NOT
+ * execute the code that modifies bank 0 timings from ROM, so
+ * we run it from cache.
+ *
+ * Notes: Does NOT use the stack.
+ *****************************************************************************/
+ .section ".text"
+ .align 2
+ .globl ext_bus_cntlr_init
+ .type ext_bus_cntlr_init, @function
+ext_bus_cntlr_init:
+ mflr r0
+ /********************************************************************
+ * Prefetch entire ext_bus_cntrl_init function into the icache.
+ * This is necessary because we are going to change the same CS we
+ * are executing from. Otherwise a CPU lockup may occur.
+ *******************************************************************/
+ bl ..getAddr
+..getAddr:
+ mflr r3 /* get address of ..getAddr */
+
+ /* Calculate number of cache lines for this function */
+ addi r4, 0, (((.Lfe0 - ..getAddr) / CFG_CACHELINE_SIZE) + 2)
+ mtctr r4
+..ebcloop:
+ icbt r0, r3 /* prefetch cache line for addr in r3*/
+ addi r3, r3, CFG_CACHELINE_SIZE /* move to next cache line */
+ bdnz ..ebcloop /* continue for $CTR cache lines */
+
+ /********************************************************************
+ * Delay to ensure all accesses to ROM are complete before changing
+ * bank 0 timings. 200usec should be enough.
+ * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
+ *******************************************************************/
+ addis r3, 0, 0x0
+ ori r3, r3, 0xA000 /* wait 200us from reset */
+ mtctr r3
+..spinlp:
+ bdnz ..spinlp /* spin loop */
+
+ /********************************************************************
+ * SETUP CPC0_CR0
+ *******************************************************************/
+ LI32(r4, 0x007000c0)
+ mtdcr cntrl0, r4
+
+ /********************************************************************
+ * Setup CPC0_CR1: Change PCIINT signal to PerWE
+ *******************************************************************/
+ mfdcr r4, cntrl1
+ ori r4, r4, 0x4000
+ mtdcr cntrl1, r4
+
+ /********************************************************************
+ * Setup External Bus Controller (EBC).
+ *******************************************************************/
+ WDCR_EBC(epcr, 0xd84c0000)
+ /********************************************************************
+ * Memory Bank 0 (Intel 28F128J3 Flash) initialization
+ *******************************************************************/
+ /*WDCR_EBC(pb0ap, 0x02869200)*/
+ WDCR_EBC(pb0ap, 0x07869200)
+ WDCR_EBC(pb0cr, 0xfe0bc000)
+ /********************************************************************
+ * Memory Bank 1 (Holtek HT6542B PS/2) initialization
+ *******************************************************************/
+ WDCR_EBC(pb1ap, 0x1f869200)
+ WDCR_EBC(pb1cr, 0xf0818000)
+ /********************************************************************
+ * Memory Bank 2 (Epson S1D13506) initialization
+ *******************************************************************/
+ WDCR_EBC(pb2ap, 0x05860300)
+ WDCR_EBC(pb2cr, 0xf045a000)
+ /********************************************************************
+ * Memory Bank 3 (Philips SJA1000 CAN Controllers) initialization
+ *******************************************************************/
+ WDCR_EBC(pb3ap, 0x0387d200)
+ WDCR_EBC(pb3cr, 0xf021c000)
+ /********************************************************************
+ * Memory Bank 4-7 (Unused) initialization
+ *******************************************************************/
+ WDCR_EBC(pb4ap, 0)
+ WDCR_EBC(pb4cr, 0)
+ WDCR_EBC(pb5ap, 0)
+ WDCR_EBC(pb5cr, 0)
+ WDCR_EBC(pb6ap, 0)
+ WDCR_EBC(pb6cr, 0)
+ WDCR_EBC(pb7ap, 0)
+ WDCR_EBC(pb7cr, 0)
+
+ /* We are all done */
+ mtlr r0 /* Restore link register */
+ blr /* Return to calling function */
+.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
+/* end ext_bus_cntlr_init() */
+
+/******************************************************************************
+ * Function: sdram_init
+ *
+ * Description: Configures SDRAM memory banks.
+ *
+ * Notes: Does NOT use the stack.
+ *****************************************************************************/
+ .section ".text"
+ .align 2
+ .globl sdram_init
+ .type sdram_init, @function
+sdram_init:
+
+ /*
+ * Disable memory controller to allow
+ * values to be changed.
+ */
+ WDCR_SDRAM(mem_mcopt1, 0x00000000)
+
+ /*
+ * Configure Memory Banks
+ */
+ WDCR_SDRAM(mem_mb0cf, 0x00084001)
+ WDCR_SDRAM(mem_mb1cf, 0x00000000)
+ WDCR_SDRAM(mem_mb2cf, 0x00000000)
+ WDCR_SDRAM(mem_mb3cf, 0x00000000)
+
+ /*
+ * Set up SDTR1 (SDRAM Timing Register)
+ */
+ WDCR_SDRAM(mem_sdtr1, 0x00854009)
+
+ /*
+ * Set RTR (Refresh Timing Register)
+ */
+ WDCR_SDRAM(mem_rtr, 0x10000000)
+ /* WDCR_SDRAM(mem_rtr, 0x05f00000) */
+
+ /********************************************************************
+ * Delay to ensure 200usec have elapsed since reset. Assume worst
+ * case that the core is running 200Mhz:
+ * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
+ *******************************************************************/
+ addis r3, 0, 0x0000
+ ori r3, r3, 0xA000 /* Wait >200us from reset */
+ mtctr r3
+..spinlp2:
+ bdnz ..spinlp2 /* spin loop */
+
+ /********************************************************************
+ * Set memory controller options reg, MCOPT1.
+ *******************************************************************/
+ WDCR_SDRAM(mem_mcopt1,0x80800000)
+
+..sdri_done:
+ blr /* Return to calling function */
+.Lfe1: .size sdram_init,.Lfe1-sdram_init
+/* end sdram_init() */
diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds
new file mode 100644
index 00000000000..8dbc5927a03
--- /dev/null
+++ b/board/csb272/u-boot.lds
@@ -0,0 +1,151 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/csb272/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/405gp_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+
+ lib_ppc/extable.o (.text)
+ lib_ppc/board.o (.text)
+ lib_generic/zlib.o (.text)
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/modnet50/flash.c b/board/modnet50/flash.c
index fc04d9124ea..a50639e09b0 100644
--- a/board/modnet50/flash.c
+++ b/board/modnet50/flash.c
@@ -312,7 +312,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
case (FLASH_AM160LV | FLASH_AM160B):
setup_offset = UNLOCK_ADDR1; /* just the adress for setup_cmd differs */
case FLASH_AMDL323B:
- /*
+ /*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
@@ -416,7 +416,7 @@ static int write_word (flash_info_t * info, ulong dest, ushort data)
if ((*(__u16 *) (dest) & data) != data)
return ERR_NOT_ERASED;
- /*
+ /*
* Disable interrupts which might cause a timeout
* here. Remember that our exception vectors are
* at address 0 in the flash, and we don't want a
diff --git a/board/modnet50/u-boot.lds b/board/modnet50/u-boot.lds
index ac09f5fb7c0..98997904d48 100644
--- a/board/modnet50/u-boot.lds
+++ b/board/modnet50/u-boot.lds
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -29,7 +29,7 @@ SECTIONS
. = 0x00000000;
. = ALIGN(4);
- .text :
+ .text :
{
cpu/arm720t/start.o (.text)
*(.text)
@@ -52,17 +52,17 @@ SECTIONS
__bss_start = .;
.bss : { *(.bss) }
_end = .;
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_info 0 : { *(.debug_info) }
- .debug_line 0 : { *(.debug_line) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- .debug_aranges 0 : { *(.debug_aranges) }
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_info 0 : { *(.debug_info) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ .debug_aranges 0 : { *(.debug_aranges) }
}
diff --git a/common/cmd_ace.c b/common/cmd_ace.c
index ee77f135681..555fbe39882 100644
--- a/common/cmd_ace.c
+++ b/common/cmd_ace.c
@@ -195,11 +195,4 @@ static unsigned long systemace_read(int dev,
return blkcnt;
}
-
-
#endif
-
-/*
- * $Log: $
- */
-
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index 9e920c9bdc7..87260b02d60 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -159,13 +159,13 @@ int binary_test (char *op, char *arg1, char *arg2, int w)
/* command line interface to the shell test */
int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
{
- int value, w;
+ int value, w;
- /* Validate arguments */
- if ((argc != 4)){
+ /* Validate arguments */
+ if ((argc != 4)){
printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
+ return 1;
+ }
/* Check for a data width specification.
* Defaults to long (4) if no specification.
@@ -192,6 +192,6 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
U_BOOT_CMD(
itest, 4, 0, do_itest,
- "itest - return true/false on integer compare\n",
+ "itest - return true/false on integer compare\n",
"[.b, .w, .l, .s] [*]value1 <op> [*]value2\n"
);
diff --git a/common/usb.c b/common/usb.c
index a96052a0c0e..1bb9438f2a1 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -25,7 +25,6 @@
*
*/
-
/*
* How it works:
*
@@ -47,7 +46,7 @@
#endif
-#undef USB_DEBUG
+/* #define USB_DEBUG */
#ifdef USB_DEBUG
#define USB_PRINTF(fmt,args...) printf (fmt ,##args)
@@ -55,6 +54,8 @@
#define USB_PRINTF(fmt,args...)
#endif
+#define USB_BUFSIZ 512
+
static struct usb_device usb_dev[USB_MAX_DEVICE];
static int dev_index;
static int running;
@@ -387,6 +388,12 @@ int usb_get_configuration_no(struct usb_device *dev,unsigned char *buffer,int cf
}
tmp=swap_16(config->wTotalLength);
+ if (tmp > USB_BUFSIZ) {
+ USB_PRINTF("usb_get_configuration_no: failed to get descriptor - too long: %d\n",
+ tmp);
+ return -1;
+ }
+
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",cfgno,result,tmp);
return result;
@@ -516,8 +523,7 @@ int usb_get_string(struct usb_device *dev, unsigned short langid, unsigned char
*/
int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
{
-
- unsigned char mybuf[256];
+ unsigned char mybuf[USB_BUFSIZ];
unsigned char *tbuf;
int err;
unsigned int u, idx;
@@ -551,6 +557,12 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
return err;
u=tbuf[0];
USB_PRINTF("Strn Len %d, index %d\n",u,index);
+
+ if (u > USB_BUFSIZ) {
+ USB_PRINTF("usb_string: failed to get string - too long: %d\n", u);
+ return -1;
+ }
+
err = usb_get_string(dev, dev->string_langid, index, tbuf, u);
if (err < 0)
return err;
@@ -619,7 +631,7 @@ int usb_new_device(struct usb_device *dev)
{
int addr, err;
int tmp;
- unsigned char tmpbuf[256];
+ unsigned char tmpbuf[USB_BUFSIZ];
dev->descriptor.bMaxPacketSize0 = 8; /* Start off at 8 bytes */
dev->maxpacketsize = 0; /* Default to 8 byte max packet size */
@@ -895,7 +907,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port)
int usb_hub_configure(struct usb_device *dev)
{
- unsigned char buffer[256], *bitmap;
+ unsigned char buffer[USB_BUFSIZ], *bitmap;
struct usb_hub_descriptor *descriptor;
struct usb_hub_status *hubsts;
int i;
@@ -912,6 +924,13 @@ int usb_hub_configure(struct usb_device *dev)
return -1;
}
descriptor = (struct usb_hub_descriptor *)buffer;
+
+ if (descriptor->bLength > USB_BUFSIZ) {
+ USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor - too long: %d\N",
+ descriptor->bLength);
+ return -1;
+ }
+
if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
USB_HUB_PRINTF("usb_hub_configure: failed to get hub descriptor 2nd giving up %lX\n",dev->status);
return -1;
@@ -968,6 +987,12 @@ int usb_hub_configure(struct usb_device *dev)
for (i = 0; i < dev->maxchild; i++)
USB_HUB_PRINTF("port %d is%s removable\n", i + 1,
hub->desc.DeviceRemovable[(i + 1)/8] & (1 << ((i + 1)%8)) ? " not" : "");
+ if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
+ USB_HUB_PRINTF("usb_hub_configure: failed to get Status - too long: %d\n",
+ descriptor->bLength);
+ return -1;
+ }
+
if (usb_get_hub_status(dev, buffer) < 0) {
USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",dev->status);
return -1;
diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c
index 0291193e832..67e581ad21d 100644
--- a/cpu/arm720t/interrupts.c
+++ b/cpu/arm720t/interrupts.c
@@ -17,7 +17,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -43,8 +43,8 @@ extern void reset_cpu(ulong addr);
#define READ_TIMER (IO_TC1D & 0xffff)
#else
#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
-#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
-#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
#endif
@@ -112,15 +112,15 @@ void show_regs (struct pt_regs *regs)
flags = condition_codes (regs);
- printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
- "sp : %08lx ip : %08lx fp : %08lx\n",
+ printf ("pc : [<%08lx>] lr : [<%08lx>]\n"
+ "sp : %08lx ip : %08lx fp : %08lx\n",
instruction_pointer (regs),
regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
- printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
+ printf ("r10: %08lx r9 : %08lx r8 : %08lx\n",
regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
- printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
+ printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
- printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
+ printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
printf ("Flags: %c%c%c%c",
flags & CC_N_BIT ? 'N' : 'n',
@@ -188,7 +188,7 @@ static ulong lastdec;
int interrupt_init (void)
{
#ifdef CONFIG_NETARM
- /* disable all interrupts */
+ /* disable all interrupts */
IRQEN = 0;
/* operate timer 2 in non-prescale mode */
diff --git a/doc/README.commands.itest b/doc/README.commands.itest
index db54160e1fc..5e0fe86247a 100644
--- a/doc/README.commands.itest
+++ b/doc/README.commands.itest
@@ -1,12 +1,12 @@
-A slow day today so here is a revised itest command with provisional
+A slow day today so here is a revised itest command with provisional
support for comparing strings as well :-))
Now table driven to allow the operators
-eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=
-Uses the expected command modifier for integer compares of width 1, 2 or
-4 bytes of .b, .w, .l and the new modifer of .s for a string compare.
-String comparison is over the length of the shorter, this hopefully
+Uses the expected command modifier for integer compares of width 1, 2 or
+4 bytes of .b, .w, .l and the new modifer of .s for a string compare.
+String comparison is over the length of the shorter, this hopefully
avoids missing terminators when using an indirect pointer.
eg.
diff --git a/doc/README.modnet50 b/doc/README.modnet50
index de7165c927b..d8d9c9d8210 100644
--- a/doc/README.modnet50
+++ b/doc/README.modnet50
@@ -2,7 +2,7 @@ U-BOOT Port for FSForth ModNET50 Board
--------------------------------------
author: Thomas Elste <info@elste.org>
- IMMS gGmbH <www.imms.de>
+ IMMS gGmbH <www.imms.de>
The port based upon an early (partial complete)
armboot-port from Stephan Linz for the ModNET50 Board.
@@ -19,7 +19,7 @@ Overview:
Current Configuration (include/configs/modnet50.h):
Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
- 0x10000000 - 0x101FFFFF 2M Flash
+ 0x10000000 - 0x101FFFFF 2M Flash
The Flash uses a BB-Architectur with 35 sectors
(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
@@ -48,15 +48,15 @@ Files:
cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
board/modnet50/memsetup.S .. memory setup for ModNET50
-board/modnet50/flash.c .. flash routines
+board/modnet50/flash.c .. flash routines
board/modnet50/modnet50.c .. some board init stuff
-drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU
-drivers/netarm_eth.h .. header for ethernet driver
+drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU
+drivers/netarm_eth.h .. header for ethernet driver
include/configs/modnet50.h .. configuration file for ModNET50
-include/netarm_*.h .. register and macro definitions for
- the NETARM CPU family
+include/netarm_*.h .. register and macro definitions for
+ the NETARM CPU family
-doc/README.modnet50 .. this readme
+doc/README.modnet50 .. this readme
diff --git a/drivers/netarm_eth.c b/drivers/netarm_eth.c
index a15b653e736..89b3a8394ed 100644
--- a/drivers/netarm_eth.c
+++ b/drivers/netarm_eth.c
@@ -22,12 +22,13 @@
#include <common.h>
+
+#ifdef CONFIG_DRIVER_NETARMETH
#include <command.h>
#include <net.h>
#include "netarm_eth.h"
#include <asm/arch/netarm_registers.h>
-#ifdef CONFIG_DRIVER_NETARMETH
#if (CONFIG_COMMANDS & CFG_CMD_NET)
diff --git a/include/asm-arm/arch-arm720t/netarm_dma_module.h b/include/asm-arm/arch-arm720t/netarm_dma_module.h
index c5170359a25..328eaf0da9e 100644
--- a/include/asm-arm/arch-arm720t/netarm_dma_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_dma_module.h
@@ -1,5 +1,4 @@
-/*
- * include/asm-armnommu/arch-netarm/netarm_dma_module.h
+/* * include/asm-armnommu/arch-netarm/netarm_dma_module.h
*
* Copyright (C) 2000 NETsilicon, Inc.
* Copyright (C) 2000 WireSpeed Communications Corporation
@@ -181,4 +180,3 @@ typedef struct __NETARM_DMA_Buff_Desc_M_to_M
#endif
#endif
-
diff --git a/include/asm-arm/arch-arm720t/netarm_gen_module.h b/include/asm-arm/arch-arm720t/netarm_gen_module.h
index 6ab5cc10faf..90d9da81746 100644
--- a/include/asm-arm/arch-arm720t/netarm_gen_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_gen_module.h
@@ -34,32 +34,32 @@
/* GEN unit register offsets */
-#define NETARM_GEN_MODULE_BASE (0xFFB00000)
+#define NETARM_GEN_MODULE_BASE (0xFFB00000)
#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c)))
-#define NETARM_GEN_SYSTEM_CONTROL (0x00)
-#define NETARM_GEN_STATUS_CONTROL (0x04)
-#define NETARM_GEN_PLL_CONTROL (0x08)
-#define NETARM_GEN_SOFTWARE_SERVICE (0x0c)
+#define NETARM_GEN_SYSTEM_CONTROL (0x00)
+#define NETARM_GEN_STATUS_CONTROL (0x04)
+#define NETARM_GEN_PLL_CONTROL (0x08)
+#define NETARM_GEN_SOFTWARE_SERVICE (0x0c)
-#define NETARM_GEN_TIMER1_CONTROL (0x10)
-#define NETARM_GEN_TIMER1_STATUS (0x14)
-#define NETARM_GEN_TIMER2_CONTROL (0x18)
-#define NETARM_GEN_TIMER2_STATUS (0x1c)
+#define NETARM_GEN_TIMER1_CONTROL (0x10)
+#define NETARM_GEN_TIMER1_STATUS (0x14)
+#define NETARM_GEN_TIMER2_CONTROL (0x18)
+#define NETARM_GEN_TIMER2_STATUS (0x1c)
-#define NETARM_GEN_PORTA (0x20)
-#define NETARM_GEN_PORTB (0x24)
-#define NETARM_GEN_PORTC (0x28)
+#define NETARM_GEN_PORTA (0x20)
+#define NETARM_GEN_PORTB (0x24)
+#define NETARM_GEN_PORTC (0x28)
-#define NETARM_GEN_INTR_ENABLE (0x30)
-#define NETARM_GEN_INTR_ENABLE_SET (0x34)
-#define NETARM_GEN_INTR_ENABLE_CLR (0x38)
-#define NETARM_GEN_INTR_STATUS_EN (0x34)
-#define NETARM_GEN_INTR_STATUS_RAW (0x38)
+#define NETARM_GEN_INTR_ENABLE (0x30)
+#define NETARM_GEN_INTR_ENABLE_SET (0x34)
+#define NETARM_GEN_INTR_ENABLE_CLR (0x38)
+#define NETARM_GEN_INTR_STATUS_EN (0x34)
+#define NETARM_GEN_INTR_STATUS_RAW (0x38)
-#define NETARM_GEN_CACHE_CONTROL1 (0x40)
-#define NETARM_GEN_CACHE_CONTROL2 (0x44)
+#define NETARM_GEN_CACHE_CONTROL1 (0x40)
+#define NETARM_GEN_CACHE_CONTROL2 (0x44)
/* select bitfield definitions */
@@ -72,7 +72,7 @@
#define NETARM_GEN_SYS_CFG_BUSHALF (0x20000000)
#define NETARM_GEN_SYS_CFG_BUSFULL (0x40000000)
-#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000)
+#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000)
#define NETARM_GEN_SYS_CFG_WDOG_EN (0x01000000)
#define NETARM_GEN_SYS_CFG_WDOG_IRQ (0x00000000)
@@ -112,57 +112,57 @@
#define NETARM_GEN_PLL_CTL_PLLCNT_MASK (0x0F000000)
#define NETARM_GEN_PLL_CTL_PLLCNT(x) (((x)<<24) & \
- NETARM_GEN_PLL_CTL_PLLCNT_MASK)
+ NETARM_GEN_PLL_CTL_PLLCNT_MASK)
/* Defaults for POLTST and ICP Fields in PLL CTL */
-#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x)
-#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6)
-#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00)
-#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C)
+#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x)
+#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6)
+#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00)
+#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C)
/* Software Service Register ( 0xFFB0_000C ) */
-#define NETARM_GEN_SW_SVC_RESETA (0x123)
-#define NETARM_GEN_SW_SVC_RESETB (0x321)
+#define NETARM_GEN_SW_SVC_RESETA (0x123)
+#define NETARM_GEN_SW_SVC_RESETB (0x321)
/* PORT C Register ( 0xFFB0_0028 ) */
-#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00))
-#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00))
+#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00))
+#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00))
/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */
-#define NETARM_GEN_TCTL_ENABLE (0x80000000)
-#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000)
+#define NETARM_GEN_TCTL_ENABLE (0x80000000)
+#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000)
-#define NETARM_GEN_TCTL_USE_IRQ (0x00000000)
-#define NETARM_GEN_TCTL_USE_FIQ (0x20000000)
+#define NETARM_GEN_TCTL_USE_IRQ (0x00000000)
+#define NETARM_GEN_TCTL_USE_FIQ (0x20000000)
-#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000)
-#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF)
+#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000)
+#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF)
-#define NETARM_GEN_TSTAT_INTPEN (0x40000000)
-#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF)
+#define NETARM_GEN_TSTAT_INTPEN (0x40000000)
+#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF)
/* prescale to msecs conversion */
-#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \
- NETARM_GEN_TSTAT_CTC_MASK ) + \
+#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) + \
1 ) ) / (NETARM_XTAL_FREQ/1000) )
-#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
+#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
NETARM_GEN_TSTAT_CTC_MASK ) | \
NETARM_GEN_TCTL_USE_PRESCALE )
#if 0
/* ifdef CONFIG_NETARM_PLL_BYPASS else */
#error test
-#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \
- NETARM_GEN_TSTAT_CTC_MASK ) + \
+#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \
+ NETARM_GEN_TSTAT_CTC_MASK ) + \
1 ) ) / (NETARM_XTAL_FREQ/1000) )
-#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
+#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
NETARM_GEN_TSTAT_CTC_MASK ) | \
NETARM_GEN_TCTL_USE_PRESCALE )
#endif
diff --git a/include/asm-arm/arch-arm720t/netarm_mem_module.h b/include/asm-arm/arch-arm720t/netarm_mem_module.h
index 02ca9fb5714..7c63d176a99 100644
--- a/include/asm-arm/arch-arm720t/netarm_mem_module.h
+++ b/include/asm-arm/arch-arm720t/netarm_mem_module.h
@@ -155,4 +155,3 @@
#define NETARM_MEM_OPT_WRITE_SYNC (0x00000001)
#endif
-
diff --git a/include/asm-arm/arch-arm720t/netarm_registers.h b/include/asm-arm/arch-arm720t/netarm_registers.h
index 231a37843ec..029c7f4c74e 100644
--- a/include/asm-arm/arch-arm720t/netarm_registers.h
+++ b/include/asm-arm/arch-arm720t/netarm_registers.h
@@ -77,4 +77,3 @@
#include <asm/arch/netarm_eth_module.h>
#endif
-
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
index 265f744d0e3..9c924b8592d 100644
--- a/include/bmp_logo.h
+++ b/include/bmp_logo.h
@@ -18,7 +18,7 @@ unsigned short bmp_logo_palette[] = {
0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999,
0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3,
0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA,
- 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
+ 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF,
};
unsigned char bmp_logo_bitmap[] = {
diff --git a/include/configs/csb272.h b/include/configs/csb272.h
new file mode 100644
index 00000000000..74577609e70
--- /dev/null
+++ b/include/configs/csb272.h
@@ -0,0 +1,313 @@
+/*
+ * (C) Copyright 2004
+ * Tolunay Orkun, Nextio Inc., torkun@nextio.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_CSB272 1 /* on a Cogent CSB272 board */
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init() */
+#define CONFIG_LAST_STAGE_INIT 1 /* Call last_stage_init() */
+#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
+
+/*
+ * OS Bootstrap configuration
+ *
+ */
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 3 /* autoboot after X seconds */
+#endif
+
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress when bootdelay = 0 */
+
+#if 1
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs console=ttyS0,38400 debug " \
+ "root=/dev/ram rw ramdisk_size=4096 " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm fe000000 fe100000"
+#endif
+
+#if 0
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs console=ttyS0,38400 debug " \
+ "root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
+#endif
+
+/*
+ * BOOTP/DHCP protocol configuration
+ *
+ */
+#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAULT | \
+ CONFIG_BOOTP_DNS2 | \
+ CONFIG_BOOTP_BOOTFILESIZE )
+/*
+ * U-Boot Monitor Command Line Functions Configuration
+ *
+ */
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_ELF | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_I2C | \
+ CFG_CMD_PCI | \
+ CFG_CMD_DATE | \
+ CFG_CMD_MII | \
+ CFG_CMD_PING | \
+ CFG_CMD_DHCP )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Serial download configuration
+ *
+ */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * KGDB Configuration
+ *
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ *
+ */
+#undef CFG_HUSH_PARSER /* use "hush" command parser */
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> " /* hush shell secondary prompt */
+#endif
+
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
+#define CFG_EXTBDINFO 1 /* To use extended board_info (bd_t) */
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * watchdog configuration
+ *
+ */
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * UART configuration
+ *
+ */
+#define CFG_EXT_SERIAL_CLOCK 3868400 /* use external serial clock */
+#undef CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
+#undef CFG_BASE_BAUD
+#define CONFIG_BAUDRATE 38400 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE \
+ { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * I2C configuration
+ *
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_SPEED 100000 /* I2C speed */
+#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
+
+/*
+ * MII PHY configuration
+ *
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_PHY_CMD_DELAY 40 /* PHY COMMAND delay */
+ /* 32usec min. for LXT971A */
+#define CONFIG_PHY_RESET_DELAY 300 /* PHY RESET recovery delay */
+
+/*
+ * RTC configuration
+ *
+ * Note that DS1307 RTC is limited to 100Khz I2C bus.
+ *
+ */
+#define CONFIG_RTC_DS1307 /* Use Dallas 1307 RTC */
+
+/*
+ * PCI stuff
+ *
+ */
+#define CONFIG_PCI /* include pci support */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
+#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
+#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
+
+#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
+#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+
+/*
+ * IDE stuff
+ *
+ */
+#undef CONFIG_IDE_PCMCIA /* no pcmcia interface required */
+#undef CONFIG_IDE_LED /* no led for ide supported */
+#undef CONFIG_IDE_RESET /* no reset for ide supported */
+
+/*
+ * Environment configuration
+ *
+ */
+#define CFG_ENV_IS_IN_FLASH 1 /* environment is in FLASH */
+#undef CFG_ENV_IS_IN_NVRAM
+#undef CFG_ENV_IS_IN_EEPROM
+
+/*
+ * General Memory organization
+ *
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0xFE000000
+#define CFG_FLASH_SIZE 0x02000000
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */
+
+#if CFG_MONITOR_BASE < CFG_FLASH_BASE
+#define CFG_RAMSTART
+#endif
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+#define CFG_ENV_IN_OWN_SECTOR 1 /* Give Environment own sector */
+#define CFG_ENV_ADDR 0xFFF00000 /* Address of Environment Sector */
+#define CFG_ENV_SIZE 0x00001000 /* Size of Environment */
+#define CFG_ENV_SECT_SIZE 0x00040000 /* Size of Environment Sector */
+#endif
+
+/*
+ * FLASH Device configuration
+ *
+ */
+#define CFG_FLASH_CFI 1 /* flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_BANKS 1 /* max # of memory banks */
+#define CFG_FLASH_INCREMENT 0 /* there is only one bank */
+#define CFG_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
+#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+/*
+ * On Chip Memory location/size
+ *
+ */
+#define CFG_OCM_DATA_ADDR 0xF8000000
+#define CFG_OCM_DATA_SIZE 0x1000
+
+/*
+ * Global info and initial stack
+ *
+ */
+#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of on-chip SRAM */
+#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* byte size reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*
+ * Cache configuration
+ *
+ */
+#define CFG_DCACHE_SIZE 16384 /* For IBM 405 CPUs, older 405 ppc's */
+ /* have only 8kB, 16kB is save here */
+#define CFG_CACHELINE_SIZE 32
+
+/*
+ * Miscellaneous board specific definitions
+ *
+ */
+#define CFG_I2C_PLL_ADDR 0x58 /* I2C address of AMIS FS6377-01 PLL */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ *
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */
diff --git a/net/tftp.c b/net/tftp.c
index 3ba15ab625f..fdf1770f017 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -205,10 +205,10 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
TftpBlock = ntohs(*(ushort *)pkt);
/*
- * RFC1350 specifies that the first data packet will
- * have sequence number 1. If we receive a sequence
- * number of 0 this means that there was a wrap
- * around of the (16 bit) counter.
+ * RFC1350 specifies that the first data packet will
+ * have sequence number 1. If we receive a sequence
+ * number of 0 this means that there was a wrap
+ * around of the (16 bit) counter.
*/
if (TftpBlock == 0) {
TftpBlockWrap++;