diff options
175 files changed, 257 insertions, 2363 deletions
@@ -358,13 +358,13 @@ UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null) UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION -export ARCH CPU BOARD VENDOR SOC +export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC export CPP AR NM LDR STRIP OBJCOPY OBJDUMP export MAKE AWK export DTC CHECK CHECKFLAGS -export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE +export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS export KBUILD_CFLAGS KBUILD_AFLAGS # When compiling out-of-tree modules, put MODVERDIR in the module @@ -567,7 +567,8 @@ NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) CHECKFLAGS += $(NOSTDINC_FLAGS) # FIX ME -cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS) +cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ + $(NOSTDINC_FLAGS) c_flags := $(KBUILD_CFLAGS) $(cpp_flags) ######################################################################### @@ -651,11 +652,11 @@ u-boot-main := $(libs-y) # Add GCC lib -ifdef USE_PRIVATE_LIBGCC -ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") +ifdef CONFIG_USE_PRIVATE_LIBGCC +ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a else -PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc +PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc endif else PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc @@ -1113,23 +1114,6 @@ SYSTEM_MAP = \ System.map: u-boot @$(call SYSTEM_MAP,$<) > $@ -checkthumb: - @if test $(call cc-version) -lt 0404; then \ - echo -n '*** Your GCC does not produce working '; \ - echo 'binaries in THUMB mode.'; \ - echo '*** Your board is configured for THUMB mode.'; \ - false; \ - fi - -# GCC 3.x is reported to have problems generating the type of relocation -# that U-Boot wants. -# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html -checkgcc4: - @if test $(call cc-version) -lt 0400; then \ - echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \ - false; \ - fi - checkdtc: @if test $(call dtc-version) -lt 0104; then \ echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ @@ -1177,7 +1161,6 @@ include/license.h: tools/bin2header COPYING # Directories & files removed with 'make clean' CLEAN_DIRS += $(MODVERDIR) CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \ - board/*/config.tmp board/*/*/config.tmp \ include/autoconf.mk* include/spl-autoconf.mk \ include/tpl-autoconf.mk diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c index eb421d642d..f23f17501f 100644 --- a/api/api_platform-powerpc.c +++ b/api/api_platform-powerpc.c @@ -30,7 +30,7 @@ int platform_sys_info(struct sys_info *si) si->clk_bus = gd->bus_clk; si->clk_cpu = gd->cpu_clk; -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) || \ +#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define bi_bar bi_immr_base #elif defined(CONFIG_MPC5xxx) diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 792cb43450..f4c2d81044 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -41,7 +41,17 @@ endif # Only test once ifneq ($(CONFIG_SPL_BUILD),y) -ALL-$(CONFIG_SYS_THUMB_BUILD) += checkthumb +ifeq ($(CONFIG_SYS_THUMB_BUILD),y) +archprepare: checkthumb + +checkthumb: + @if test "$(call cc-version)" -lt "0404"; then \ + echo -n '*** Your GCC does not produce working '; \ + echo 'binaries in THUMB mode.'; \ + echo '*** Your board is configured for THUMB mode.'; \ + false; \ + fi +endif endif # Try if EABI is supported, else fall back to old API, diff --git a/arch/arm/cpu/arm720t/tegra114/config.mk b/arch/arm/cpu/arm720t/tegra114/config.mk deleted file mode 100644 index 7947b50fd0..0000000000 --- a/arch/arm/cpu/arm720t/tegra114/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra124/config.mk b/arch/arm/cpu/arm720t/tegra124/config.mk deleted file mode 100644 index 5e10701f0e..0000000000 --- a/arch/arm/cpu/arm720t/tegra124/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2010-2013 -# NVIDIA Corporation <www.nvidia.com> -# -# SPDX-License-Identifier: GPL-2.0+ -#/ -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra20/config.mk b/arch/arm/cpu/arm720t/tegra20/config.mk deleted file mode 100644 index e073345223..0000000000 --- a/arch/arm/cpu/arm720t/tegra20/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2010,2011 -# NVIDIA Corporation <www.nvidia.com> -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/cpu/arm720t/tegra30/config.mk b/arch/arm/cpu/arm720t/tegra30/config.mk deleted file mode 100644 index 2388c56db7..0000000000 --- a/arch/arm/cpu/arm720t/tegra30/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -USE_PRIVATE_LIBGCC = yes diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 45febcfd98..9fc81cd012 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -5,17 +5,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -# Build private libgcc only when asked for -ifdef USE_PRIVATE_LIBGCC -lib-y += _ashldi3.o -lib-y += _ashrdi3.o -lib-y += _divsi3.o -lib-y += _lshrdi3.o -lib-y += _modsi3.o -lib-y += _udivsi3.o -lib-y += _umodsi3.o -lib-y += div0.o -endif +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \ + _lshrdi3.o _modsi3.o _udivsi3.o _umodsi3.o div0.o ifdef CONFIG_ARM64 obj-y += crt0_64.o diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index adc97125b5..fcaa44f1d6 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -43,6 +43,7 @@ CREATE_LDR_ENV = endif SYM_PREFIX = _ +export SYM_PREFIX LDR_FLAGS-y := LDR_FLAGS-$(CONFIG_BFIN_BOOTROM_USES_EVT1) += -J diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk index 7ee7faae8f..332cd62c74 100644 --- a/arch/mips/cpu/mips32/config.mk +++ b/arch/mips/cpu/mips32/config.mk @@ -11,9 +11,7 @@ # Note: Toolchains with binutils prior to v2.16 # are no longer supported by U-Boot MIPS tree! # -MIPSFLAGS := -march=mips32r2 - -PLATFORM_CPPFLAGS += $(MIPSFLAGS) +PLATFORM_CPPFLAGS += -DCONFIG_MIPS32 -march=mips32r2 PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT ifdef CONFIG_SYS_BIG_ENDIAN PLATFORM_LDFLAGS += -m elf32btsmip @@ -21,4 +19,5 @@ else PLATFORM_LDFLAGS += -m elf32ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 \ + -T $(srctree)/examples/standalone/mips.lds diff --git a/arch/mips/cpu/mips64/config.mk b/arch/mips/cpu/mips64/config.mk index 02113a1f09..c55eb7f2ee 100644 --- a/arch/mips/cpu/mips64/config.mk +++ b/arch/mips/cpu/mips64/config.mk @@ -11,9 +11,7 @@ # Note: Toolchains with binutils prior to v2.16 # are no longer supported by U-Boot MIPS tree! # -MIPSFLAGS = -march=mips64 - -PLATFORM_CPPFLAGS += $(MIPSFLAGS) +PLATFORM_CPPFLAGS += -DCONFIG_MIPS64 -march=mips64 PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT ifdef CONFIG_SYS_BIG_ENDIAN PLATFORM_LDFLAGS += -m elf64btsmip @@ -21,4 +19,5 @@ else PLATFORM_LDFLAGS += -m elf64ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T $(srctree)/$(src)/mips64.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 \ + -T $(srctree)/examples/standalone/mips64.lds diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk index 00b0fd9c9c..b8e53e55c0 100644 --- a/arch/mips/cpu/xburst/config.mk +++ b/arch/mips/cpu/xburst/config.mk @@ -12,4 +12,5 @@ else PLATFORM_LDFLAGS += -m elf32ltsmip endif -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T $(srctree)/$(src)/mips.lds +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 \ + -T $(srctree)/examples/standalone/mips.lds diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 370592668e..fabeb83f7e 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -8,9 +8,4 @@ obj-y += board.o obj-$(CONFIG_CMD_BOOTM) += bootm.o -# Build private libgcc only when asked for -ifdef USE_PRIVATE_LIBGCC -lib-y += ashldi3.o -lib-y += ashrdi3.o -lib-y += lshrdi3.o -endif +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashldi3.o ashrdi3.o lshrdi3.o diff --git a/arch/nds32/config.mk b/arch/nds32/config.mk index 0cbc4ad058..10248524d1 100644 --- a/arch/nds32/config.mk +++ b/arch/nds32/config.mk @@ -12,7 +12,8 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := nds32le-linux- endif -CONFIG_STANDALONE_LOAD_ADDR = 0x300000 -T $(srctree)/$(src)/nds32.lds +CONFIG_STANDALONE_LOAD_ADDR = 0x300000 \ + -T $(srctree)/examples/standalone/nds32.lds PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -mrelax PLATFORM_RELFLAGS += -gdwarf-2 diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index e398f97982..fb7096e7b5 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -35,5 +35,14 @@ endif # Only test once ifneq ($(CONFIG_SPL_BUILD),y) -ALL-y += checkgcc4 +archprepare: checkgcc4 + +# GCC 3.x is reported to have problems generating the type of relocation +# that U-Boot wants. +# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html +checkgcc4: + @if test $(call cc-version) -lt 0400; then \ + echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \ + false; \ + fi endif diff --git a/arch/powerpc/cpu/mpc8260/config.mk b/arch/powerpc/cpu/mpc8260/config.mk index dfac710e63..59f152df74 100644 --- a/arch/powerpc/cpu/mpc8260/config.mk +++ b/arch/powerpc/cpu/mpc8260/config.mk @@ -5,5 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 \ +PLATFORM_CPPFLAGS += -DCONFIG_MPC8260 -DCONFIG_CPM2 \ -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc8260/kgdb.S b/arch/powerpc/cpu/mpc8260/kgdb.S index dd04d6bd6f..1432344bcc 100644 --- a/arch/powerpc/cpu/mpc8260/kgdb.S +++ b/arch/powerpc/cpu/mpc8260/kgdb.S @@ -9,8 +9,6 @@ #include <mpc8260.h> #include <version.h> -#define CONFIG_8260 1 /* needed for Linux kernel header files */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 65510fa760..324f132bad 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -14,8 +14,6 @@ #include <mpc8260.h> #include <version.h> -#define CONFIG_8260 1 /* needed for Linux kernel header files */ - #include <ppc_asm.tmpl> #include <ppc_defs.h> diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c index fe928db039..f8d03cba2d 100644 --- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c +++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c @@ -49,7 +49,6 @@ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \ } while (0) -#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) static void update_rdcc(void) { u32 val; @@ -72,7 +71,6 @@ static void update_rdcc(void) } } } -#endif #if defined(CONFIG_440) /* @@ -101,7 +99,6 @@ void dcbz_area(u32 start_address, u32 num_bytes); #define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d)) -#if !defined(CONFIG_NAND_SPL) /*-----------------------------------------------------------------------------+ * sdram_memsize *-----------------------------------------------------------------------------*/ @@ -217,7 +214,6 @@ void board_add_ram_info(int use_default) val = (val & SDRAM_MMODE_DCL_MASK) >> 4; printf(", CL%d)", val); } -#endif /* !CONFIG_NAND_SPL */ #if defined(CONFIG_SPD_EEPROM) @@ -2843,16 +2839,6 @@ static void test(void) *---------------------------------------------------------------------------*/ phys_size_t initdram(int board_type) { - /* - * Only run this SDRAM init code once. For NAND booting - * targets like Kilauea, we call initdram() early from the - * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot(). - * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT) - * which calls initdram() again. This time the controller - * mustn't be reconfigured again since we're already running - * from SDRAM. - */ -#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) unsigned long val; #if defined(CONFIG_440) @@ -2969,12 +2955,10 @@ phys_size_t initdram(int board_type) #endif #if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) /*------------------------------------------------------------------ | DQS calibration. +-----------------------------------------------------------------*/ DQS_autocalibration(); -#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ #endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ /* @@ -3009,13 +2993,10 @@ phys_size_t initdram(int board_type) set_mcsr(get_mcsr()); #endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */ -#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ - return (CONFIG_SYS_MBYTES_SDRAM << 20); } #endif /* CONFIG_SPD_EEPROM */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #if defined(CONFIG_440) u32 mfdcr_any(u32 dcr) { @@ -3062,7 +3043,6 @@ void mtdcr_any(u32 dcr, u32 val) } } #endif /* defined(CONFIG_440) */ -#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ inline void ppc4xx_ibm_ddr2_register_dump(void) { diff --git a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c index 82823147fe..67f149deef 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c @@ -27,12 +27,6 @@ #include "ecc.h" -/* - * Only compile the DDR auto-calibration code for NOR boot and - * not for NAND boot (NAND SPL and NAND U-Boot - NUB) - */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - #define MAXBXCF 4 #define SDRAM_RXBAS_SHIFT_1M 20 @@ -1231,9 +1225,3 @@ u32 DQS_autocalibration(void) return 0; } -#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ -u32 DQS_autocalibration(void) -{ - return 0; -} -#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */ diff --git a/arch/powerpc/cpu/ppc4xx/Makefile b/arch/powerpc/cpu/ppc4xx/Makefile index 14b520ff9c..4b792ae2d2 100644 --- a/arch/powerpc/cpu/ppc4xx/Makefile +++ b/arch/powerpc/cpu/ppc4xx/Makefile @@ -14,11 +14,7 @@ obj-y += kgdb.o obj-y += 40x_spd_sdram.o -ifndef CONFIG_NAND_SPL -ifndef CONFIG_NAND_U_BOOT obj-y += 44x_spd_ddr.o -endif -endif obj-$(CONFIG_SDRAM_PPC4xx_IBM_DDR2) += 44x_spd_ddr2.o obj-$(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) += 4xx_ibm_ddr2_autocalib.o obj-y += 4xx_pci.o diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index e72c37c75b..11b55d5a56 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -182,16 +182,13 @@ .extern ext_bus_cntlr_init -#ifdef CONFIG_NAND_U_BOOT - .extern reconfig_tlb0 -#endif /* * Set up GOT: Global Offset Table * * Use r12 to access the GOT */ -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) @@ -205,22 +202,7 @@ GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT -#endif /* CONFIG_NAND_SPL */ - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \ - !defined(CONFIG_SPL_BUILD) - /* - * NAND U-Boot image is started from offset 0 - */ - .text -#if defined(CONFIG_440) - bl reconfig_tlb0 -#endif - GET_GOT - bl cpu_init_f /* run low-level CPU init code (from Flash) */ - bl board_init_f - /* NOTREACHED - board_init_f() does not return */ -#endif +#endif /* CONFIG_SPL_BUILD */ #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD) /* @@ -255,9 +237,7 @@ */ #if defined(CONFIG_440) -#if !defined(CONFIG_NAND_SPL) .section .bootpg,"ax" -#endif .globl _start_440 /**************************************************************************/ @@ -511,7 +491,7 @@ tlbnx2: addi r4,r4,1 /* Next TLB */ * r3 - 1st arg to board_init(): IMMP pointer * r4 - 2nd arg to board_init(): boot flag */ -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) .text .long 0x27051956 /* U-Boot Magic Number */ .globl version_string @@ -777,9 +757,6 @@ _start: stwu r1,-8(r1) /* Save back chain and move SP */ stw r0,+12(r1) /* Save return addr (underflow vect) */ -#ifdef CONFIG_NAND_SPL - bl nand_boot_common /* will not return */ -#else #ifndef CONFIG_SPL_BUILD GET_GOT #endif @@ -787,7 +764,6 @@ _start: bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f /* NOTREACHED - board_init_f() does not return */ -#endif #endif /* CONFIG_440 */ @@ -1050,9 +1026,6 @@ _start: stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* CONFIG_SYS_INIT_DCACHE_CS */ -#ifdef CONFIG_NAND_SPL - bl nand_boot_common /* will not return */ -#else GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ @@ -1060,13 +1033,11 @@ _start: bl board_init_f /* run first part of init code (from Flash) */ /* NOTREACHED - board_init_f() does not return */ -#endif /* CONFIG_NAND_SPL */ - #endif /* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. @@ -1632,7 +1603,7 @@ __440_msr_continue: blr function_epilog(dcbz_area) #endif /* CONFIG_440 */ -#endif /* CONFIG_NAND_SPL */ +#endif /* CONFIG_SPL_BUILD */ /*------------------------------------------------------------------------------- */ /* Function: in8 */ @@ -1981,75 +1952,3 @@ pll_wait: blr function_epilog(mftlb1) #endif /* CONFIG_440 */ - -#if defined(CONFIG_NAND_SPL) -/* - * void nand_boot_relocate(dst, src, bytes) - * - * r3 = Destination address to copy code to (in SDRAM) - * r4 = Source address to copy code from - * r5 = size to copy in bytes - */ -nand_boot_relocate: - mr r6,r3 - mr r7,r4 - mflr r8 - - /* - * Copy SPL from icache into SDRAM - */ - subi r3,r3,4 - subi r4,r4,4 - srwi r5,r5,2 - mtctr r5 -..spl_loop: - lwzu r0,4(r4) - stwu r0,4(r3) - bdnz ..spl_loop - - /* - * Calculate "corrected" link register, so that we "continue" - * in execution in destination range - */ - sub r3,r7,r6 /* r3 = src - dst */ - sub r8,r8,r3 /* r8 = link-reg - (src - dst) */ - mtlr r8 - blr - -nand_boot_common: - /* - * First initialize SDRAM. It has to be available *before* calling - * nand_boot(). - */ - lis r3,CONFIG_SYS_SDRAM_BASE@h - ori r3,r3,CONFIG_SYS_SDRAM_BASE@l - bl initdram - - /* - * Now copy the 4k SPL code into SDRAM and continue execution - * from there. - */ - lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h - ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l - lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h - ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l - lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h - ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l - bl nand_boot_relocate - - /* - * We're running from SDRAM now!!! - * - * It is necessary for 4xx systems to relocate from running at - * the original location (0xfffffxxx) to somewhere else (SDRAM - * preferably). This is because CS0 needs to be reconfigured for - * NAND access. And we can't reconfigure this CS when currently - * "running" from it. - */ - - /* - * Finally call nand_boot() to load main NAND U-Boot image from - * NAND and jump to it. - */ - bl nand_boot /* will not return */ -#endif /* CONFIG_NAND_SPL */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 831804c5c5..72f30feee6 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1356,7 +1356,7 @@ void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); #elif defined(CONFIG_GEMINI) #define _machine _MACH_gemini #define have_of 0 -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) #define _machine _MACH_8260 #define have_of 0 #elif defined(CONFIG_SANDPOINT) diff --git a/arch/powerpc/include/asm/status_led.h b/arch/powerpc/include/asm/status_led.h index 037570993a..441619042d 100644 --- a/arch/powerpc/include/asm/status_led.h +++ b/arch/powerpc/include/asm/status_led.h @@ -11,7 +11,7 @@ #ifndef CONFIG_BOARD_SPECIFIC_LED # if defined(CONFIG_8xx) # include <mpc8xx.h> -# elif defined(CONFIG_8260) +# elif defined(CONFIG_MPC8260) # include <mpc8260.h> # elif defined(CONFIG_5xx) # include <mpc5xx.h> diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index 5916f7ce99..3c28420574 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -35,7 +35,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ +#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) \ || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index e6d8be51ca..0f6298269a 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -7,11 +7,7 @@ ## Build a couple of necessary functions into a private libgcc ## if the user asked for it -ifdef USE_PRIVATE_LIBGCC -lib-y += _ashldi3.o -lib-y += _ashrdi3.o -lib-y += _lshrdi3.o -endif +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _lshrdi3.o MINIMAL= diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 13d761c1f7..f86c6f3e8f 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -277,10 +277,10 @@ static init_fnc_t *init_sequence[] = { serial_init, console_init_f, display_options, -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) prt_8260_rsr, prt_8260_clks, -#endif /* CONFIG_8260 */ +#endif /* CONFIG_MPC8260 */ #if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif @@ -504,7 +504,7 @@ void board_init_f(ulong bootflag) bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ #endif -#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ +#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif diff --git a/arch/powerpc/lib/kgdb.c b/arch/powerpc/lib/kgdb.c index 19a56dbe21..01a7708aef 100644 --- a/arch/powerpc/lib/kgdb.c +++ b/arch/powerpc/lib/kgdb.c @@ -159,7 +159,7 @@ kgdb_trap(struct pt_regs *regs) #define SPACE_REQUIRED ((32*4)+(32*8)+(6*4)) -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 /* store floating double indexed */ #define STFDI(n,p) __asm__ __volatile__ ("stfd " #n ",%0" : "=o"(p[2*n])) /* store floating double multiple */ @@ -190,7 +190,7 @@ kgdb_getregs(struct pt_regs *regs, char *buf, int max) *ptr++ = regs->gpr[i]; /* Floating Point Regs */ -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 STFDM(ptr); ptr += 32*2; #else @@ -213,7 +213,7 @@ kgdb_getregs(struct pt_regs *regs, char *buf, int max) /* set the value of the CPU registers */ -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 /* load floating double */ #define LFD(n,v) __asm__ __volatile__ ("lfd " #n ",%0" :: "o"(v)) /* load floating double indexed */ @@ -252,7 +252,7 @@ kgdb_putreg(struct pt_regs *regs, int regno, char *buf, int length) regs->gpr[regno] = *ptr; else switch (regno) { -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 #define caseF(n) \ case (n) + 32: LFD(n, *ptr); break; @@ -298,7 +298,7 @@ kgdb_putregs(struct pt_regs *regs, char *buf, int length) regs->gpr[i] = *ptr++; /* Floating Point Regs */ -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 LFDM(ptr); #endif ptr += 32*2; diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 2e2fc58a1b..98f565eaaf 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -92,6 +92,11 @@ int os_close(int fd) return close(fd); } +int os_unlink(const char *pathname) +{ + return unlink(pathname); +} + void os_exit(int exit_code) { exit(exit_code); diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index 5fc9d9d66d..8a84b24af1 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -15,15 +15,5 @@ obj-y += time.o endif obj-$(CONFIG_CMD_SH_ZIMAGEBOOT) += zimageboot.o - - -# Build private libgcc only when asked for -ifdef USE_PRIVATE_LIBGCC -lib-y += ashiftrt.o -lib-y += ashiftlt.o -lib-y += lshiftrt.o -lib-y += ashldi3.o -lib-y += ashrsi3.o -lib-y += lshrdi3.o -lib-y += movmem.o -endif +lib-$(CONFIG_USE_PRIVATE_LIBGCC) += ashiftrt.o ashiftlt.o lshiftrt.o \ + ashldi3.o ashrsi3.o lshrdi3.o movmem.o diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk index e2327ecfac..be59f58190 100644 --- a/arch/sparc/config.mk +++ b/arch/sparc/config.mk @@ -9,7 +9,9 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := sparc-elf- endif +gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) + CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \ - -T $(srctree)/$(src)/sparc.lds + -T $(srctree)/examples/standalone/sparc.lds PLATFORM_CPPFLAGS += -DCONFIG_SPARC -D__sparc__ diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 58dff1467d..1e52a5e9b0 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -31,4 +31,4 @@ LDFLAGS_FINAL += --wrap=__moddi3 --wrap=__umoddi3 export NORMAL_LIBGCC = $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) PREFIXED_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/$(shell basename $(NORMAL_LIBGCC)) -export USE_PRIVATE_LIBGCC=$(shell dirname $(PREFIXED_LIBGCC)) +CONFIG_USE_PRIVATE_LIBGCC=$(shell dirname $(PREFIXED_LIBGCC)) diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 61bfea3fab..9673118857 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -17,7 +17,6 @@ extern void board_pll_init_f(void); -#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) static void cram_bcr_write(u32 wr_val) { wr_val <<= 2; @@ -41,20 +40,9 @@ static void cram_bcr_write(u32 wr_val) return; } -#endif phys_size_t initdram(int board_type) { -#if defined(CONFIG_NAND_SPL) - u32 reg; - - /* don't reinit PLL when booting via I2C bootstrap option */ - mfsdr(SDR0_PINSTP, reg); - if (reg != 0xf0000000) - board_pll_init_f(); -#endif - -#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) int i; u32 val; @@ -88,7 +76,6 @@ phys_size_t initdram(int board_type) /* Wait a short while, since for NAND booting this is too fast */ for (i=0; i<200000; i++) ; -#endif return (CONFIG_SYS_MBYTES_RAM << 20); } diff --git a/board/amcc/acadia/pll.c b/board/amcc/acadia/pll.c index d74b725ae5..d868582ba9 100644 --- a/board/amcc/acadia/pll.c +++ b/board/amcc/acadia/pll.c @@ -135,45 +135,3 @@ void board_pll_init_f(void) mtcpr(CPR0_CLKUP, 0x40000000); } #endif /* CPU_<speed>_405EZ */ - -#if defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) -/* - * Get timebase clock frequency - */ -unsigned long get_tbclk(void) -{ - unsigned long cpr_plld; - unsigned long cpr_primad; - unsigned long primad_cpudv; - unsigned long pllFbkDiv; - unsigned long freqProcessor; - - /* - * Read PLL Mode registers - */ - mfcpr(CPR0_PLLD, cpr_plld); - - /* - * Read CPR_PRIMAD register - */ - mfcpr(CPR0_PRIMAD, cpr_primad); - - /* - * Determine CPU clock frequency - */ - primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24); - if (primad_cpudv == 0) - primad_cpudv = 16; - - /* - * Determine FBK_DIV. - */ - pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); - if (pllFbkDiv == 0) - pllFbkDiv = 256; - - freqProcessor = (CONFIG_SYS_CLK_FREQ * pllFbkDiv) / primad_cpudv; - - return (freqProcessor); -} -#endif /* defined(CONFIG_NAND_SPL) || defined(CONFIG_SPI_SPL) */ diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 84bbacf4c5..c8d09636ab 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -16,7 +16,6 @@ void ext_bus_cntlr_init(void); void configure_ppc440ep_pins(void); int is_nand_selected(void); -#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) /************************************************************************* * * Bamboo has one bank onboard sdram (plus DIMM) @@ -178,7 +177,6 @@ const unsigned char cfg_simulate_spd_eeprom[128] = { 0, 0 }; -#endif #if 0 { /* GPIO Alternate1 Alternate2 Alternate3 */ @@ -440,15 +438,11 @@ int checkboard(void) phys_size_t initdram (int board_type) { -#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) long dram_size; dram_size = spd_sdram(); return dram_size; -#else - return CONFIG_SYS_MBYTES_SDRAM << 20; -#endif } /*----------------------------------------------------------------------------+ @@ -1794,23 +1788,12 @@ void configure_ppc440ep_pins(void) if (ppc440ep_core_selection[NAND_FLASH] == CORE_SELECTED) { update_ndfc_ios(gpio_tab); - -#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | SDR0_CUST0_CHIPSELGAT_EN1 | SDR0_CUST0_CHIPSELGAT_EN2); -#else - mtsdr(SDR0_CUST0, SDR0_CUST0_MUX_NDFC_SEL | - SDR0_CUST0_NDFC_ENABLE | - SDR0_CUST0_NDFC_BW_8_BIT | - SDR0_CUST0_NDFC_ARE_MASK | - SDR0_CUST0_CHIPSELGAT_EN0 | - SDR0_CUST0_CHIPSELGAT_EN2); -#endif - ndfc_selection_in_fpga(); } else diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 48dbcbe2a1..5c7c839079 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -32,12 +32,7 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ -#ifndef CONFIG_NAND_SPL tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 0, AC_RWX | SA_G) -#else - tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 0, AC_RWX | SA_G) - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) -#endif /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G) @@ -58,31 +53,3 @@ tlbtab: tlbentry(CONFIG_SYS_USB_DEVICE, SZ_1K, CONFIG_SYS_USB_DEVICE, 0, AC_RW | SA_IG) tlbtab_end - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - /* - * For NAND booting the first TLB has to be reconfigured to full size - * and with caching disabled after running from RAM! - */ -#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 0) -#define TLB02 TLB2(AC_RWX | SA_IG) - - .globl reconfig_tlb0 -reconfig_tlb0: - sync - isync - addi r4,r0,0x0000 /* TLB entry #0 */ - lis r5,TLB00@h - ori r5,r5,TLB00@l - tlbwe r5,r4,0x0000 /* Save it out */ - lis r5,TLB01@h - ori r5,r5,TLB01@l - tlbwe r5,r4,0x0001 /* Save it out */ - lis r5,TLB02@h - ori r5,r5,TLB02@l - tlbwe r5,r4,0x0002 /* Save it out */ - sync - isync - blr -#endif diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 2b5f1a62cc..79d4babe06 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -379,11 +379,7 @@ int board_early_init_r (void) */ /* Remap the NOR FLASH to 0xcc00.0000 ... 0xcfff.ffff */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtebc(PB3CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); -#else mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000); -#endif /* Remove TLB entry of boot EBC mapping */ remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20); diff --git a/board/amcc/canyonlands/init.S b/board/amcc/canyonlands/init.S index d83cd6e754..bf00bd6bca 100644 --- a/board/amcc/canyonlands/init.S +++ b/board/amcc/canyonlands/init.S @@ -31,13 +31,7 @@ tlbtab: * use the speed up boot process. It is patched after relocation to * enable SA_I */ -#ifndef CONFIG_NAND_SPL tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR, 4, AC_RWX | SA_G) /* TLB 0 */ -#else - tlbentry(CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 4, AC_RWX | SA_G) - tlbentry(CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_RWX | SA_IG) - tlbentry(256 << 20, SZ_256M, 256 << 20, 0, AC_RWX | SA_IG) -#endif /* * TLB entries for SDRAM are not needed on this platform. @@ -95,31 +89,3 @@ tlbtab: #endif tlbtab_end - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - /* - * For NAND booting the first TLB has to be reconfigured to full size - * and with caching disabled after running from RAM! - */ -#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_RWX | SA_IG) - - .globl reconfig_tlb0 -reconfig_tlb0: - sync - isync - addi r4,r0,0x0000 /* TLB entry #0 */ - lis r5,TLB00@h - ori r5,r5,TLB00@l - tlbwe r5,r4,0x0000 /* Save it out */ - lis r5,TLB01@h - ori r5,r5,TLB01@l - tlbwe r5,r4,0x0001 /* Save it out */ - lis r5,TLB02@h - ori r5,r5,TLB02@l - tlbwe r5,r4,0x0002 /* Save it out */ - sync - isync - blr -#endif diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index b31e9db3f9..f876639d35 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -48,11 +48,7 @@ tlbtab: /* BOOT_CS (FLASH) must be forth. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ -#ifndef CONFIG_NAND_SPL tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G ) -#else - tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_RWX | SA_G ) -#endif #ifdef CONFIG_SYS_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ @@ -81,31 +77,3 @@ tlbtab: tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RWX | SA_IG) tlbtab_end - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - /* - * For NAND booting the first TLB has to be reconfigured to full size - * and with caching disabled after running from RAM! - */ -#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_RWX | SA_IG) - - .globl reconfig_tlb0 -reconfig_tlb0: - sync - isync - addi r4,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* TLB entry # */ - lis r5,TLB00@h - ori r5,r5,TLB00@l - tlbwe r5,r4,0x0000 /* Save it out */ - lis r5,TLB01@h - ori r5,r5,TLB01@l - tlbwe r5,r4,0x0001 /* Save it out */ - lis r5,TLB02@h - ori r5,r5,TLB02@l - tlbwe r5,r4,0x0002 /* Save it out */ - sync - isync - blr -#endif diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index 2c5a21806a..67640d7edf 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -26,14 +26,6 @@ extern int denali_wait_for_dlllock(void); extern void denali_core_search_data_eye(void); -#if defined(CONFIG_NAND_SPL) -/* Using arch/powerpc/cpu/ppc4xx/speed.c to calculate the bus frequency is too big - * for the 4k NAND boot image so define bus_frequency to 133MHz here - * which is save for the refresh counter setup. - */ -#define get_bus_freq(val) 133333333 -#endif - /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -41,8 +33,7 @@ extern void denali_core_search_data_eye(void); ************************************************************************/ phys_size_t initdram (int board_type) { -#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT)) || \ - defined(CONFIG_NAND_SPL) +#if !defined(CONFIG_SYS_RAMBOOT) ulong speed = get_bus_freq(0); mtsdram(DDR0_02, 0x00000000); @@ -81,7 +72,7 @@ phys_size_t initdram (int board_type) mtsdram(DDR0_02, 0x00000001); denali_wait_for_dlllock(); -#endif /* #ifndef CONFIG_NAND_U_BOOT */ +#endif /* #ifndef CONFIG_SYS_RAMBOOT */ #ifdef CONFIG_DDR_DATA_EYE /* -----------------------------------------------------------+ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 73c65c56aa..53f9b3419f 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -142,8 +142,7 @@ int misc_init_r(void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \ - defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) mtdcr(EBC0_CFGADDR, PB3CR); #else mtdcr(EBC0_CFGADDR, PB0CR); @@ -151,8 +150,7 @@ int misc_init_r(void) pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \ - defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) mtdcr(EBC0_CFGADDR, PB3CR); #else mtdcr(EBC0_CFGADDR, PB0CR); @@ -360,7 +358,7 @@ void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) /* * On NAND-booting sequoia, we need to patch the chips select numbers * in the dtb (CS0 - NAND, CS3 - NOR) @@ -411,4 +409,4 @@ void ft_board_setup(void *blob, bd_t *bd) return; } } -#endif /* CONFIG_NAND_U_BOOT */ +#endif /* CONFIG_SYS_RAMBOOT */ diff --git a/board/avnet/fx12mm/.gitignore b/board/avnet/fx12mm/.gitignore deleted file mode 100644 index b644f59941..0000000000 --- a/board/avnet/fx12mm/.gitignore +++ /dev/null @@ -1 +0,0 @@ -config.tmp diff --git a/board/avnet/v5fx30teval/.gitignore b/board/avnet/v5fx30teval/.gitignore deleted file mode 100644 index f6418a0c50..0000000000 --- a/board/avnet/v5fx30teval/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/config.tmp diff --git a/board/bct-brettl2/config.mk b/board/bct-brettl2/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/bct-brettl2/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/bf518f-ezbrd/config.mk b/board/bf518f-ezbrd/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/bf518f-ezbrd/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/bf526-ezbrd/config.mk b/board/bf526-ezbrd/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/bf526-ezbrd/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/bf527-ad7160-eval/config.mk b/board/bf527-ad7160-eval/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/bf527-ad7160-eval/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/bf527-ezkit/config.mk b/board/bf527-ezkit/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/bf527-ezkit/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/bf527-sdp/config.mk b/board/bf527-sdp/config.mk index af299f5f1e..1d46cfcd48 100644 --- a/board/bf527-sdp/config.mk +++ b/board/bf527-sdp/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 6 diff --git a/board/bf533-ezkit/config.mk b/board/bf533-ezkit/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/bf533-ezkit/config.mk +++ b/board/bf533-ezkit/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf533-stamp/config.mk b/board/bf533-stamp/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/bf533-stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk index bc0e7476e5..ab0fbecab9 100644 --- a/board/bf537-stamp/config.mk +++ b/board/bf537-stamp/config.mk @@ -7,11 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 diff --git a/board/bf538f-ezkit/config.mk b/board/bf538f-ezkit/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/bf538f-ezkit/config.mk +++ b/board/bf538f-ezkit/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/bf548-ezkit/config.mk b/board/bf548-ezkit/config.mk index 8d2c60f308..7bb8e9c9ee 100644 --- a/board/bf548-ezkit/config.mk +++ b/board/bf548-ezkit/config.mk @@ -7,11 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 diff --git a/board/bf561-acvilon/config.mk b/board/bf561-acvilon/config.mk index ce94715572..854d7dbb86 100644 --- a/board/bf561-acvilon/config.mk +++ b/board/bf561-acvilon/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk index ce94715572..854d7dbb86 100644 --- a/board/bf561-ezkit/config.mk +++ b/board/bf561-ezkit/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/br4/config.mk b/board/br4/config.mk deleted file mode 100644 index 2436ec07f4..0000000000 --- a/board/br4/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright (c) Switchfin Org. <dpn@switchfin.org> -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/cm-bf527/config.mk b/board/cm-bf527/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/cm-bf527/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/cm-bf533/config.mk b/board/cm-bf533/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/cm-bf533/config.mk +++ b/board/cm-bf533/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537e/config.mk b/board/cm-bf537e/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/cm-bf537e/config.mk +++ b/board/cm-bf537e/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf537u/config.mk b/board/cm-bf537u/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/cm-bf537u/config.mk +++ b/board/cm-bf537u/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/cm-bf548/config.mk b/board/cm-bf548/config.mk index 289c8a488e..beb9834649 100644 --- a/board/cm-bf548/config.mk +++ b/board/cm-bf548/config.mk @@ -7,11 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --dma 6 LDR_FLAGS-BFIN_BOOT_FIFO := --dma 1 diff --git a/board/cm-bf561/config.mk b/board/cm-bf561/config.mk index ce94715572..854d7dbb86 100644 --- a/board/cm-bf561/config.mk +++ b/board/cm-bf561/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 diff --git a/board/cogent/mb.c b/board/cogent/mb.c index 3eea47d3e8..c0256433ce 100644 --- a/board/cogent/mb.c +++ b/board/cogent/mb.c @@ -14,7 +14,7 @@ /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) #include <ioports.h> @@ -186,7 +186,7 @@ const iop_conf_t iop_conf_tab[4][32] = { } }; -#endif /* CONFIG_8260 */ +#endif /* CONFIG_MPC8260 */ /* ------------------------------------------------------------------------- */ diff --git a/board/cogent/serial.c b/board/cogent/serial.c index f0d6b22cfd..95c8120722 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -13,7 +13,7 @@ DECLARE_GLOBAL_DATA_PTR; #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR) #if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \ - (defined(CONFIG_8260) && defined(CONFIG_CONS_NONE)) + (defined(CONFIG_MPC8260) && defined(CONFIG_CONS_NONE)) #if CONFIG_CONS_INDEX == 1 #define CMA_MB_SERIAL_BASE CMA_MB_SERIALA_BASE diff --git a/board/esd/pmc440/init.S b/board/esd/pmc440/init.S index cc8030b5e5..1f26fad147 100644 --- a/board/esd/pmc440/init.S +++ b/board/esd/pmc440/init.S @@ -27,11 +27,7 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ -#ifndef CONFIG_NAND_SPL tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G ) -#else - tlbentry( CONFIG_SYS_NAND_BOOT_SPL_SRC, SZ_4K, CONFIG_SYS_NAND_BOOT_SPL_SRC, 1, AC_RWX | SA_G ) -#endif /* TLB entries for DDR2 SDRAM are generated dynamically */ @@ -71,31 +67,3 @@ tlbtab: /* TODO: what about high IO space */ tlbtab_end - -#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) - /* - * For NAND booting the first TLB has to be reconfigured to full size - * and with caching disabled after running from RAM! - */ -#define TLB00 TLB0(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M) -#define TLB01 TLB1(CONFIG_SYS_BOOT_BASE_ADDR, 1) -#define TLB02 TLB2(AC_RWX | SA_IG) - - .globl reconfig_tlb0 -reconfig_tlb0: - sync - isync - addi r4,r0,0x0000 /* TLB entry #0 */ - lis r5,TLB00@h - ori r5,r5,TLB00@l - tlbwe r5,r4,0x0000 /* Save it out */ - lis r5,TLB01@h - ori r5,r5,TLB01@l - tlbwe r5,r4,0x0001 /* Save it out */ - lis r5,TLB02@h - ori r5,r5,TLB02@l - tlbwe r5,r4,0x0002 /* Save it out */ - sync - isync - blr -#endif diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 88fc5f77b6..e86996c55f 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -229,19 +229,11 @@ int misc_init_r(void) gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(EBC0_CFGADDR, PB2CR); -#else mtdcr(EBC0_CFGADDR, PB0CR); -#endif pbcr = mfdcr(EBC0_CFGDATA); size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - mtdcr(EBC0_CFGADDR, PB2CR); -#else mtdcr(EBC0_CFGADDR, PB0CR); -#endif mtdcr(EBC0_CFGDATA, pbcr); /* diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h index 3ab3794901..7024d8a807 100644 --- a/board/hymod/hymod.h +++ b/board/hymod/hymod.h @@ -8,7 +8,7 @@ #ifndef _HYMOD_H_ #define _HYMOD_H_ -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 #include <asm/iopin_8260.h> #endif diff --git a/board/ip04/config.mk b/board/ip04/config.mk index bc0e7476e5..ab0fbecab9 100644 --- a/board/ip04/config.mk +++ b/board/ip04/config.mk @@ -7,11 +7,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 LDR_FLAGS-BFIN_BOOT_UART := --port g --gpio 6 diff --git a/board/pr1/config.mk b/board/pr1/config.mk deleted file mode 100644 index 2436ec07f4..0000000000 --- a/board/pr1/config.mk +++ /dev/null @@ -1,15 +0,0 @@ -# -# Copyright (c) Switchfin Org. <dpn@switchfin.org> -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/tcm-bf518/config.mk b/board/tcm-bf518/config.mk deleted file mode 100644 index 0d3df2dbd9..0000000000 --- a/board/tcm-bf518/config.mk +++ /dev/null @@ -1,13 +0,0 @@ -# -# Copyright (c) 2005-2008 Analog Device Inc. -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif diff --git a/board/tcm-bf537/config.mk b/board/tcm-bf537/config.mk index 97eaafef2e..7f9138b09b 100644 --- a/board/tcm-bf537/config.mk +++ b/board/tcm-bf537/config.mk @@ -7,10 +7,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# FIX ME -ifneq ($(filter lib lib/lzma lib/zlib, $(obj)),) -ccflags-y := -O2 -endif - # Set some default LDR flags based on boot mode. LDR_FLAGS-BFIN_BOOT_PARA := --bits 16 --dma 8 diff --git a/board/xilinx/ml507/.gitignore b/board/xilinx/ml507/.gitignore deleted file mode 100644 index f6418a0c50..0000000000 --- a/board/xilinx/ml507/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/config.tmp diff --git a/board/xilinx/ppc405-generic/.gitignore b/board/xilinx/ppc405-generic/.gitignore deleted file mode 100644 index b644f59941..0000000000 --- a/board/xilinx/ppc405-generic/.gitignore +++ /dev/null @@ -1 +0,0 @@ -config.tmp diff --git a/board/xilinx/ppc440-generic/.gitignore b/board/xilinx/ppc440-generic/.gitignore deleted file mode 100644 index f6418a0c50..0000000000 --- a/board/xilinx/ppc440-generic/.gitignore +++ /dev/null @@ -1 +0,0 @@ -/config.tmp diff --git a/boards.cfg b/boards.cfg index 1d3aab1d17..23dfddaa0e 100644 --- a/boards.cfg +++ b/boards.cfg @@ -502,8 +502,8 @@ Active m68k mcf547x_8x - freescale m548xevb Active microblaze microblaze - xilinx microblaze-generic microblaze-generic - Michal Simek <monstr@monstr.eu> Active mips mips32 - - qemu-mips qemu_mips qemu-mips:SYS_BIG_ENDIAN Vlad Lungu <vlad.lungu@windriver.com> Active mips mips32 - - qemu-mips qemu_mipsel qemu-mips:SYS_LITTLE_ENDIAN - -Active mips mips32 - imgtec malta malta malta:MIPS32,SYS_BIG_ENDIAN Paul Burton <paul.burton@imgtec.com> -Active mips mips32 - imgtec malta maltael malta:MIPS32,SYS_LITTLE_ENDIAN Paul Burton <paul.burton@imgtec.com> +Active mips mips32 - imgtec malta malta malta:SYS_BIG_ENDIAN Paul Burton <paul.burton@imgtec.com> +Active mips mips32 - imgtec malta maltael malta:SYS_LITTLE_ENDIAN Paul Burton <paul.burton@imgtec.com> Active mips mips32 - micronas vct vct_platinum vct:VCT_PLATINUM - Active mips mips32 - micronas vct vct_platinum_onenand vct:VCT_PLATINUM,VCT_ONENAND - Active mips mips32 - micronas vct vct_platinum_onenand_small vct:VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE - @@ -1126,22 +1126,14 @@ Active powerpc ppc4xx - amcc - Active powerpc ppc4xx - amcc - taihu - John Otken <jotken@softadvances.com> Active powerpc ppc4xx - amcc - taishan - Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc - yucca - - -Active powerpc ppc4xx - amcc acadia acadia_nand acadia:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc bamboo bamboo_nand bamboo:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc canyonlands arches canyonlands:ARCHES Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc canyonlands canyonlands canyonlands:CANYONLANDS Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc canyonlands canyonlands_nand canyonlands:CANYONLANDS,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc canyonlands glacier canyonlands:GLACIER Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc canyonlands glacier_nand canyonlands:GLACIER,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc kilauea haleakala kilauea:HALEAKALA Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc kilauea haleakala_nand kilauea:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc kilauea kilauea kilauea:KILAUEA Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc kilauea kilauea_nand kilauea:NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc sequoia rainier sequoia:RAINIER Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc sequoia rainier_nand sequoia:RAINIER,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc sequoia rainier_ramboot sequoia:RAINIER,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc sequoia sequoia sequoia:SEQUOIA Stefan Roese <sr@denx.de> -Active powerpc ppc4xx - amcc sequoia sequoia_nand sequoia:SEQUOIA,NAND_U_BOOT,SYS_TEXT_BASE=0x01000000 Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc sequoia sequoia_ramboot sequoia:SEQUOIA,SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/sequoia/u-boot-ram.lds Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc walnut sycamore walnut Stefan Roese <sr@denx.de> Active powerpc ppc4xx - amcc walnut walnut - Stefan Roese <sr@denx.de> diff --git a/common/board_f.c b/common/board_f.c index e591a0e86e..4856975161 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -642,7 +642,7 @@ static int setup_board_part1(void) bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ #endif -#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ +#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif @@ -858,10 +858,10 @@ static init_fnc_t init_sequence_f[] = { #endif display_options, /* say that we are here */ display_text_info, /* show debugging info if required */ -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) prt_8260_rsr, prt_8260_clks, -#endif /* CONFIG_8260 */ +#endif /* CONFIG_MPC8260 */ #if defined(CONFIG_MPC83xx) prt_83xx_rsr, #endif diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 15119a775e..238cadb1e1 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -88,7 +88,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("sramstart", bd->bi_sramstart); print_num("sramsize", bd->bi_sramsize); #if defined(CONFIG_5xx) || defined(CONFIG_8xx) || \ - defined(CONFIG_8260) || defined(CONFIG_E500) + defined(CONFIG_MPC8260) || defined(CONFIG_E500) print_num("immr_base", bd->bi_immr_base); #endif print_num("bootflags", bd->bi_bootflags); diff --git a/common/cmd_immap.c b/common/cmd_immap.c index bdf53a4dbb..1414f9ad55 100644 --- a/common/cmd_immap.c +++ b/common/cmd_immap.c @@ -12,13 +12,13 @@ #include <common.h> #include <command.h> -#if defined(CONFIG_8xx) || defined(CONFIG_8260) +#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) #if defined(CONFIG_8xx) #include <asm/8xx_immap.h> #include <commproc.h> #include <asm/iopin_8xx.h> -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) #include <asm/immap_8260.h> #include <asm/cpm_8260.h> #include <asm/iopin_8260.h> @@ -40,7 +40,7 @@ do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) volatile sysconf8xx_t *sc = &immap->im_siu_conf; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile sysconf8260_t *sc = &immap->im_siu_conf; #endif @@ -50,7 +50,7 @@ do_siuinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("SIPEND= %08x SIMASK= %08x\n", sc->sc_sipend, sc->sc_simask); printf ("SIEL = %08x SIVEC = %08x\n", sc->sc_siel, sc->sc_sivec); printf ("TESR = %08x SDCR = %08x\n", sc->sc_tesr, sc->sc_sdcr); -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) printf ("BCR = %08x\n", sc->sc_bcr); printf ("P_ACR = %02x P_ALRH= %08x P_ALRL= %08x\n", sc->sc_ppc_acr, sc->sc_ppc_alrh, sc->sc_ppc_alrl); @@ -72,7 +72,7 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) volatile memctl8xx_t *memctl = &immap->im_memctl; int nbanks = 8; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile memctl8260_t *memctl = &immap->im_memctl; int nbanks = 12; #endif @@ -92,19 +92,19 @@ do_memcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("MAR = %08x", memctl->memc_mar); #if defined(CONFIG_8xx) printf (" MCR = %08x\n", memctl->memc_mcr); -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) putc ('\n'); #endif printf ("MAMR = %08x MBMR = %08x", memctl->memc_mamr, memctl->memc_mbmr); #if defined(CONFIG_8xx) printf ("\nMSTAT = %04x\n", memctl->memc_mstat); -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) printf (" MCMR = %08x\n", memctl->memc_mcmr); #endif printf ("MPTPR = %04x MDR = %08x\n", memctl->memc_mptpr, memctl->memc_mdr); -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) printf ("PSDMR = %08x LSDMR = %08x\n", memctl->memc_psdmr, memctl->memc_lsdmr); printf ("PURT = %02x PSRT = %02x\n", @@ -123,7 +123,7 @@ do_sitinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 int do_icinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -139,7 +139,7 @@ do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) volatile car8xx_t *car = &immap->im_clkrst; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile car8260_t *car = &immap->im_clkrst; #endif @@ -147,7 +147,7 @@ do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf ("SCCR = %08x\n", car->car_sccr); printf ("PLPRCR= %08x\n", car->car_plprcr); printf ("RSR = %08x\n", car->car_rsr); -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) printf ("SCCR = %08x\n", car->car_sccr); printf ("SCMR = %08x\n", car->car_scmr); printf ("RSR = %08x\n", car->car_rsr); @@ -207,7 +207,7 @@ static void binary (char *label, uint value, int nbits) #define PB_NB_ODR 16 #define PC_NBITS 12 #define PD_NBITS 13 -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) #define PA_NBITS 32 #define PA_NB_ODR 32 #define PB_NBITS 28 @@ -224,7 +224,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) volatile iop8xx_t *iop = &immap->im_ioport; volatile ushort *l, *r; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile iop8260_t *iop = &immap->im_ioport; volatile uint *l, *r; #endif @@ -240,7 +240,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) l = &iop->iop_padir; R = &immap->im_cpm.cp_pbdir; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) l = &iop->iop_pdira; R = &iop->iop_pdirb; #endif @@ -248,7 +248,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) binary ("PB_DIR", *R++, PB_NBITS); binary ("PA_PAR", *l++, PA_NBITS); binary ("PB_PAR", *R++, PB_NBITS); -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) binary ("PA_SOR", *l++, PA_NBITS); binary ("PB_SOR", *R++, PB_NBITS); #endif @@ -266,7 +266,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) l = &iop->iop_pcdir; r = &iop->iop_pddir; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) l = &iop->iop_pdirc; r = &iop->iop_pdird; #endif @@ -278,7 +278,7 @@ do_iopinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) binary ("PC_SO ", *l++, PC_NBITS); binary (" ", 0, 0); r++; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) binary ("PC_SOR", *l++, PC_NBITS); binary ("PD_SOR", *r++, PD_NBITS); binary ("PC_ODR", *l++, PC_NBITS); @@ -436,7 +436,7 @@ static void prbrg (int n, uint val) #if defined(CONFIG_8xx) ulong clock = gd->cpu_clk; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) ulong clock = gd->arch.brg_clk; #endif @@ -489,7 +489,7 @@ do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_8xx) volatile cpm8xx_t *cp = &immap->im_cpm; volatile uint *p = &cp->cp_brgc1; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile uint *p = &immap->im_brgc1; #endif int i = 1; @@ -497,7 +497,7 @@ do_brginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) while (i <= 4) prbrg (i++, *p++); -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) p = &immap->im_brgc5; while (i <= 8) prbrg (i++, *p++); @@ -514,7 +514,7 @@ do_i2cinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) volatile i2c8xx_t *i2c = &immap->im_i2c; volatile cpm8xx_t *cp = &immap->im_cpm; volatile iic_t *iip = (iic_t *) & cp->cp_dparam[PROFF_IIC]; -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) volatile i2c8260_t *i2c = &immap->im_i2c; volatile iic_t *iip; uint dpaddr; @@ -614,7 +614,7 @@ U_BOOT_CMD( "" ); -#ifdef CONFIG_8260 +#ifdef CONFIG_MPC8260 U_BOOT_CMD( icinfo, 1, 1, do_icinfo, "print Interrupt Controller registers", diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 5bcc324675..c53601cf74 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -1008,6 +1008,9 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, if (argc == 2) { size = simple_strtoul(argv[1], NULL, 16); + } else if (argc == 1 && chk) { + puts("## Error: external checksum format must pass size\n"); + return CMD_RET_FAILURE; } else { char *s = addr; diff --git a/common/hush.c b/common/hush.c index 3f3a79c508..df10267d64 100644 --- a/common/hush.c +++ b/common/hush.c @@ -221,6 +221,8 @@ struct child_prog { pid_t pid; /* 0 if exited */ #endif char **argv; /* program name and arguments */ + /* was quoted when parsed; copy of struct o_string.nonnull field */ + int *argv_nonnull; #ifdef __U_BOOT__ int argc; /* number of program arguments */ #endif @@ -467,7 +469,7 @@ static int process_command_subs(o_string *dest, struct p_context *ctx, struct in static int parse_group(o_string *dest, struct p_context *ctx, struct in_str *input, int ch); #endif static char *lookup_param(char *src); -static char *make_string(char **inp); +static char *make_string(char **inp, int *nonnull); static int handle_dollar(o_string *dest, struct p_context *ctx, struct in_str *input); #ifndef __U_BOOT__ static int parse_string(o_string *dest, struct p_context *ctx, const char *src); @@ -1613,7 +1615,8 @@ static int run_pipe_real(struct pipe *pi) if (child->sp) { char * str = NULL; - str = make_string((child->argv + i)); + str = make_string(child->argv + i, + child->argv_nonnull + i); parse_string_outer(str, FLAG_EXIT_FROM_LOOP | FLAG_REPARSING); free(str); return last_return_code; @@ -1940,7 +1943,8 @@ static int free_pipe(struct pipe *pi, int indent) for (a = 0; a < child->argc; a++) { free(child->argv[a]); } - free(child->argv); + free(child->argv); + free(child->argv_nonnull); child->argc = 0; #endif child->argv=NULL; @@ -2470,8 +2474,14 @@ static int done_word(o_string *dest, struct p_context *ctx) argc = ++child->argc; child->argv = realloc(child->argv, (argc+1)*sizeof(*child->argv)); if (child->argv == NULL) return 1; + child->argv_nonnull = realloc(child->argv_nonnull, + (argc+1)*sizeof(*child->argv_nonnull)); + if (child->argv_nonnull == NULL) + return 1; child->argv[argc-1]=str; + child->argv_nonnull[argc-1] = dest->nonnull; child->argv[argc]=NULL; + child->argv_nonnull[argc] = 0; for (s = dest->data; s && *s; s++,str++) { if (*s == '\\') s++; *str = *s; @@ -2537,6 +2547,7 @@ static int done_command(struct p_context *ctx) prog->redirects = NULL; #endif prog->argv = NULL; + prog->argv_nonnull = NULL; #ifndef __U_BOOT__ prog->is_stopped = 0; #endif @@ -3585,8 +3596,12 @@ static char **make_list_in(char **inp, char *name) return list; } -/* Make new string for parser */ -static char * make_string(char ** inp) +/* + * Make new string for parser + * inp - array of argument strings to flatten + * nonnull - indicates argument was quoted when originally parsed + */ +static char *make_string(char **inp, int *nonnull) { char *p; char *str = NULL; @@ -3600,13 +3615,17 @@ static char * make_string(char ** inp) noeval = 1; for (n = 0; inp[n]; n++) { p = insert_var_value_sub(inp[n], noeval); - str = xrealloc(str, (len + strlen(p))); + str = xrealloc(str, (len + strlen(p) + (2 * nonnull[n]))); if (n) { strcat(str, " "); } else { *str = '\0'; } + if (nonnull[n]) + strcat(str, "'"); strcat(str, p); + if (nonnull[n]) + strcat(str, "'"); len = strlen(str) + 3; if (p != inp[n]) free(p); } @@ -6,11 +6,18 @@ # ######################################################################### -# clean the slate ... -PLATFORM_RELFLAGS = -PLATFORM_CPPFLAGS = -PLATFORM_LDFLAGS = - +# This file is included from ./Makefile and spl/Makefile. +# Clean the state to avoid the same flags added twice. +# +# (Tegra needs different flags for SPL. +# That's the reason why this file must be included from spl/Makefile too. +# If we did not have Tegra SoCs, build system would be much simpler...) +PLATFORM_RELFLAGS := +PLATFORM_CPPFLAGS := +PLATFORM_LDFLAGS := +LDFLAGS := +LDFLAGS_FINAL := +OBJCOPYFLAGS := ######################################################################### # Some architecture config.mk files need to know what CPUDIR is set to, @@ -41,12 +48,17 @@ endif ######################################################################### -RELFLAGS= $(PLATFORM_RELFLAGS) +RELFLAGS := $(PLATFORM_RELFLAGS) OBJCOPYFLAGS += --gap-fill=0xff -CPPFLAGS = $(RELFLAGS) -CPPFLAGS += -pipe $(PLATFORM_CPPFLAGS) +PLATFORM_CPPFLAGS += $(RELFLAGS) +PLATFORM_CPPFLAGS += -pipe LDFLAGS += $(PLATFORM_LDFLAGS) LDFLAGS_FINAL += -Bstatic + +export PLATFORM_CPPFLAGS +export RELFLAGS +export LDFLAGS_FINAL +export CONFIG_STANDALONE_LOAD_ADDR diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 34688e9bef..5510b13c01 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -104,7 +104,6 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) *p++ = in_be32((u32 *)(base + NDFC_DATA)); } -#ifndef CONFIG_NAND_SPL /* * Don't use these speedup functions in NAND boot image, since the image * has to fit into 4kByte. @@ -148,8 +147,6 @@ static uint8_t ndfc_read_byte(struct mtd_info *mtd) } -#endif /* #ifndef CONFIG_NAND_SPL */ - void board_nand_select_device(struct nand_chip *nand, int chip) { /* @@ -207,21 +204,11 @@ int board_nand_init(struct nand_chip *nand) nand->options |= NAND_BUSWIDTH_16; #endif -#ifndef CONFIG_NAND_SPL nand->write_buf = ndfc_write_buf; nand->verify_buf = ndfc_verify_buf; nand->read_byte = ndfc_read_byte; chip++; -#else - /* - * Setup EBC (CS0 only right now) - */ - mtebc(EBC0_CFG, CONFIG_SYS_NDFC_EBC0_CFG); - - mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR); - mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP); -#endif return 0; } diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 5332e1a18f..b80980d552 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -41,7 +41,7 @@ static int ar8035_config(struct phy_device *phydev) static struct phy_driver AR8021_driver = { .name = "AR8021", .uid = 0x4dd040, - .mask = 0x4fffff, + .mask = 0x4ffff0, .features = PHY_GBIT_FEATURES, .config = ar8021_config, .startup = genphy_startup, diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c index 659533a8d4..ce133f0069 100644 --- a/drivers/usb/eth/asix.c +++ b/drivers/usb/eth/asix.c @@ -468,8 +468,6 @@ static int asix_send(struct eth_device *eth, void *packet, int length) memcpy(msg, &packet_len, sizeof(packet_len)); memcpy(msg + sizeof(packet_len), (void *)packet, length); - if (length & 1) - length++; err = usb_bulk_msg(dev->pusb_dev, usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index 5b227cd898..9ab5446c68 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -11,7 +11,7 @@ extra-$(CONFIG_SMC911X) += smc911x_eeprom extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 extra-$(CONFIG_MPC5xxx) += interrupt extra-$(CONFIG_8xx) += test_burst timer -extra-$(CONFIG_8260) += mem_to_mem_idma2intr +extra-$(CONFIG_MPC8260) += mem_to_mem_idma2intr extra-$(CONFIG_PPC) += sched # @@ -44,9 +44,8 @@ gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`) # relocatable executable. The relocation data is not needed, and # also causes the entry point of the standalone application to be # inconsistent. -ifeq ($(ARCH),powerpc) -# FIX ME -CPPFLAGS := $(filter-out $(RELFLAGS), $(CPPFLAGS)) +ifeq ($(CONFIG_PPC),y) +PLATFORM_CPPFLAGS := $(filter-out $(RELFLAGS),$(PLATFORM_CPPFLAGS)) endif # We don't want gcc reordering functions if possible. This ensures that an diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 43872010c7..e78196797b 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -37,7 +37,7 @@ typedef struct bd_info { unsigned long bi_dsp_freq; /* dsp core frequency */ unsigned long bi_ddr_freq; /* ddr frequency */ #endif -#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ +#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) \ || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif diff --git a/include/common.h b/include/common.h index 15f5834474..090fcde5d0 100644 --- a/include/common.h +++ b/include/common.h @@ -52,16 +52,13 @@ typedef volatile unsigned char vu_char; #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ || defined(CONFIG_MPC8271) \ || defined(CONFIG_MPC8272) #define CONFIG_MPC8272_FAMILY 1 #endif -#if defined(CONFIG_MPC8272_FAMILY) -#define CONFIG_MPC8260 1 -#endif #include <asm/immap_8260.h> #endif #ifdef CONFIG_MPC86xx @@ -669,7 +666,7 @@ int get_clocks (void); int get_clocks_866 (void); int sdram_adjust_866 (void); int adjust_sdram_tbs_8xx (void); -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); @@ -737,7 +734,7 @@ void get_sys_info ( sys_info_t * ); #endif /* $(CPU)/cpu_init.c */ -#if defined(CONFIG_8xx) || defined(CONFIG_8260) +#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) void cpu_init_f (volatile immap_t *immr); #endif #if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx) @@ -745,7 +742,7 @@ void cpu_init_f (void); #endif int cpu_init_r (void); -#if defined(CONFIG_8260) +#if defined(CONFIG_MPC8260) int prt_8260_rsr (void); #elif defined(CONFIG_MPC83xx) int prt_83xx_rsr (void); diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h index a033a3a1e5..7be83b0787 100644 --- a/include/configs/CPU86.h +++ b/include/configs/CPU86.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_CPU86 1 /* ...on a CPU86 board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index 06876746a7..d3a59e8ba7 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_CPU87 1 /* ...on a CPU87 board */ #define CONFIG_PCI #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 7aaa7768fd..8ccb0ff9d8 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_MPC8272_FAMILY 1 #define CONFIG_IDS8247 1 #define CPU_ID_STR "MPC8247" diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h index a543855a56..e402075d37 100644 --- a/include/configs/IPHASE4539.h +++ b/include/configs/IPHASE4539.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_IPHASE4539 1 /* ...on a Interphase 4539 PMC */ #define CONFIG_SYS_TEXT_BASE 0xffb00000 diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index a5cea8bc3c..a2fdfd3274 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -13,7 +13,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MPC8260 /* This is an MPC8260 CPU */ #define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 3def26929b..39f7564b74 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -64,8 +64,6 @@ * details. :-( */ #define CONFIG_MPC8272 1 -#else -#define CONFIG_MPC8260 1 #endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 39c90aa2b0..8d9c8fb45c 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -33,7 +33,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_MPC8266ADS 1 /* ...on motorola ADS board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 5aeba4dc4e..6416ad5227 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_PM826 1 /* ...on a PM8260 module */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 49b4571e1a..e17fbfbbf8 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_PM828 1 /* ...on a PM828 module */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index fd39109daf..c5e2f164ce 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -95,12 +95,7 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_EEPROM 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ -#endif /*----------------------------------------------------------------------- * RTC @@ -142,69 +137,10 @@ #define CONFIG_ENV_SIZE 0x1000 /* 4096 bytes may be used for env vars */ #endif -/* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 440EPx the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from cache, I experienced problems accessing - * the NAND controller. sr - 2006-08-25 - */ -#if defined (CONFIG_NAND_U_BOOT) -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} -#endif - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/sequoia/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ -#endif #define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ /* 440EPx errata CHIP 11 */ @@ -448,7 +384,6 @@ /* * On Sequoia CS0 and CS3 are switched when configuring for NAND booting */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SYS_NAND_CS 2 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ @@ -458,16 +393,6 @@ /* Memory Bank 2 (NAND-FLASH) initialization */ #define CONFIG_SYS_EBC_PB2AP 0x018003c0 #define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_NAND_ADDR | 0x1c000) -#else -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 2 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x03017200 -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FLASH_BASE | 0xda000) - -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000) -#endif /* Memory Bank 1 (RESET) initialization */ #define CONFIG_SYS_EBC_PB1AP 0x7f817200 /* 0x03017200 */ diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 28884295e7..f5e0968011 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -184,7 +184,6 @@ * *****************************************************************************/ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_RPXSUPER 1 /* on an Embedded Planet RPX Super Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index 1cdd18c0ba..a1e2ae9753 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -13,7 +13,6 @@ #ifdef CONFIG_MPC8248 #define CPU_ID_STR "MPC8248" #else -#define CONFIG_MPC8260 #define CPU_ID_STR "MPC8250" #endif /* CONFIG_MPC8248 */ diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index b34b0a865b..7fd12d3fbc 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_TEXT_BASE 0x40000000 -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #if 0 #define CONFIG_TQM8260 100 /* ...on a TQM8260 module Rev.100 */ diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 78e8b03cd1..9c7e16305d 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_MPC8272_FAMILY 1 #define CONFIG_TQM8272 1 diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index 01cb2c85c0..d76a140728 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -11,7 +11,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ZPC1900 1 /* ...on Zephyr ZPC.1900 board */ #define CONFIG_SYS_TEXT_BASE 0xFE000000 diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 5f3b5f936f..4dd5720d2f 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -82,17 +82,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ -#endif /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ @@ -106,16 +100,6 @@ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#else -/* - * No NOR-flash on Acadia when NAND-booting. We need to undef the - * NOR device-tree fixup code as well, since flash_info is not defined - * in this case. - */ -#define CONFIG_SYS_NO_FLASH 1 -#undef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE -#endif - #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) @@ -126,61 +110,6 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif -/* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 440EPx the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from cache, I experienced problems accessing - * the NAND controller. sr - 2006-08-25 - */ -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_DATA_ADDR + (16 << 10)) /* Copy SPL here*/ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/sequoia/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - /*----------------------------------------------------------------------- * RAM (CRAM) *----------------------------------------------------------------------*/ @@ -219,7 +148,6 @@ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=fff10000\0" \ "ramdisk_addr=fff20000\0" \ "kozio=bootm ffc60000\0" \ @@ -242,14 +170,6 @@ #define CONFIG_CMD_NAND #define CONFIG_CMD_USB -/* - * No NOR on Acadia when NAND-booting - */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) -#undef CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#endif - /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ @@ -260,7 +180,6 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SYS_NAND_CS 3 /* Memory Bank 0 (Flash) initialization */ #define CONFIG_SYS_EBC_PB0AP 0x03337200 @@ -278,24 +197,6 @@ /* Memory Bank 2 (CRAM) initialization */ #define CONFIG_SYS_EBC_PB2AP 0x030400c0 #define CONFIG_SYS_EBC_PB2CR 0x020bc000 -#else -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000) - -/* - * When NAND-booting the CRAM EBC setup must be done in sync mode, since the - * NAND-SPL already initialized the CRAM and EBC to sync mode. - */ -/* Memory Bank 1 (CRAM) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x9C0201C0 -#define CONFIG_SYS_EBC_PB1CR 0x000bc000 - -/* Memory Bank 2 (CRAM) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x9C0201C0 -#define CONFIG_SYS_EBC_PB2CR 0x020bc000 -#endif /* Memory Bank 4 (CPLD) initialization */ #define CONFIG_SYS_EBC_PB4AP 0x04006000 diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 0f38c92fa0..2aea89937a 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -253,10 +253,4 @@ "cp.b ${fileaddr} " __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ "upd=run load update\0" \ -#define CONFIG_AMCC_DEF_ENV_NAND_UPD \ - "u-boot-nand=" __stringify(CONFIG_HOSTNAME) "/u-boot-nand.bin\0"\ - "nload=tftp 200000 ${u-boot-nand}\0" \ - "nupdate=nand erase 0 100000;nand write 200000 0 100000\0" \ - "nupd=run nload nupdate\0" - #endif /* __AMCC_COMMON_H */ diff --git a/include/configs/atc.h b/include/configs/atc.h index fa391b6280..77fa79a185 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_ATC 1 /* ...on a ATC board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index 97da1e9078..6ba4aaf8cb 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -86,12 +86,7 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ -#endif /*----------------------------------------------------------------------- * FLASH related @@ -120,61 +115,6 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif /* CONFIG_ENV_IS_IN_FLASH */ -/* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 440EPx the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from cache, I experienced problems accessing - * the NAND controller. sr - 2006-08-25 - */ -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/sequoia/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ @@ -182,15 +122,7 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_ADDR + 2 } #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ - -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_SYS_NAND_CS 1 -#else -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1c000) -#endif /*----------------------------------------------------------------------- * DDR SDRAM @@ -226,7 +158,6 @@ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=fff00000\0" \ "ramdisk_addr=fff10000\0" \ "" diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 5b09b45b56..06f095cc41 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -136,7 +136,7 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_SYS_HUSH_PARSER - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index a97972b81c..9eb85ebf3d 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -155,7 +155,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 003109329a..3065d22f0b 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -153,6 +153,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index fa05103e5a..c0dfe2685b 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -136,7 +136,7 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index db1b6136f3..748ddb3b15 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -179,7 +179,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index c0e8b5adc8..458868af72 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -112,7 +112,7 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index beab1271a4..b50352823e 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -110,7 +110,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index f5b9658294..d82c5b203d 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -185,6 +185,7 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* FLASH/ETHERNET uses the same async bank */ #define SHARED_RESOURCES 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 02945bee79..e1705cadae 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -254,6 +254,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* Define if want to do post memory test */ #undef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index ffb0caf947..742c299d23 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -134,7 +134,7 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index da5f029435..1a245a2b81 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -181,6 +181,7 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 15ca1af230..3db917e37b 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -160,7 +160,7 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_PROMPT "Acvilon> " - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index fb6f94873a..0a309d9269 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -102,6 +102,7 @@ * Misc Settings */ #define CONFIG_UART_CONSOLE 0 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Run core 1 from L1 SRAM start address when init uboot on core 0 diff --git a/include/configs/br4.h b/include/configs/br4.h index ef3752dcd5..f8d3158d47 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -135,7 +135,7 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 620a0f5c57..8eeb15c0e1 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -125,78 +125,9 @@ /* * Define here the location of the environment variables (FLASH). */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */ #define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ -#else -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CONFIG_SYS_NOR_CS 3 /* NOR chip connected to CSx */ -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ -#endif - -/* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 440EPx the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from cache, I experienced problems accessing - * the NAND controller. sr - 2006-08-25 - * - * This is the first official implementation of booting from 2k page sized - * NAND devices (e.g. Micron 29F2G08AA 256Mbit * 8) - */ -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from */ - /* this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (1 << 20) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE) - /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 /* Location of bad block marker*/ -#define CONFIG_SYS_NAND_5_ADDR_CYCLE /* Fifth addr used (<=128MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 64 -#define CONFIG_SYS_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ - 48, 49, 50, 51, 52, 53, 54, 55, \ - 56, 57, 58, 59, 60, 61, 62, 63} - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/canyonlands/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif /*----------------------------------------------------------------------- * FLASH related @@ -235,7 +166,6 @@ /*------------------------------------------------------------------------------ * DDR SDRAM *----------------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) #if !defined(CONFIG_ARCHES) /* * NAND booting U-Boot version uses a fixed initialization, since the whole @@ -308,7 +238,6 @@ #define CONFIG_SYS_SDRAM0_MMODE 0x00000432 #define CONFIG_SYS_SDRAM0_MEMODE 0x00000004 #endif /* !defined(CONFIG_ARCHES) */ -#endif /* !defined(CONFIG_NAND_U_BOOT) */ #define CONFIG_SYS_MBYTES_SDRAM 512 /* 512MB */ @@ -421,7 +350,6 @@ CONFIG_AMCC_DEF_ENV \ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=fc000000\0" \ "fdt_addr=fc1e0000\0" \ "ramdisk_addr=fc200000\0" \ @@ -556,15 +484,6 @@ * 0xfe00.0000 -> 4.ce00.0000 */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) -/* Memory Bank 3 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x10055e00 -#define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000) - -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/ -#else /* Memory Bank 0 (NOR-FLASH) initialization */ #define CONFIG_SYS_EBC_PB0AP 0x10055e00 #define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_BOOT_BASE_ADDR | 0x9a000) @@ -574,7 +493,6 @@ #define CONFIG_SYS_EBC_PB3AP 0x018003c0 #define CONFIG_SYS_EBC_PB3CR (CONFIG_SYS_NAND_ADDR | 0x1E000) /* BAS=NAND,BS=1MB,BU=R/W,BW=32bit*/ #endif -#endif /*defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */ #if !defined(CONFIG_ARCHES) /* Memory Bank 2 (CPLD) initialization */ diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index b15a1eb7a2..384d8715ad 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -128,7 +128,7 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index e2b954c063..8bd499a7d2 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -97,7 +97,7 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 2838012e20..67cf801a3f 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -146,6 +146,7 @@ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index da4cc6718d..34ce75baeb 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -143,7 +143,7 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 7f27eda416..346e27f3eb 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -117,6 +117,7 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 93e3c8677e..5265e5f6ef 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -99,7 +99,7 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index da4ff8e61d..e0bf3dc61e 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_DBAU1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index 56b4ecf272..9cd3054a15 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -325,7 +325,6 @@ * *****************************************************************************/ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_EP8260 11 /* on an Embedded Planet EP8260 Board, Rev. 11 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h index 18e4dafc5c..cf31f0f141 100644 --- a/include/configs/ep82xxm.h +++ b/include/configs/ep82xxm.h @@ -9,7 +9,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MPC8260 #define CPU_ID_STR "MPC8270" #define CONFIG_EP82XXM /* Embedded Planet EP82xxM H 1.0 board */ diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 3416fe3cec..262c9e9e9a 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -325,7 +325,6 @@ * *****************************************************************************/ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_GW8260 1 /* on an GW8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/hymod.h b/include/configs/hymod.h index cc250649ea..c973365e12 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -17,7 +17,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_HYMOD 1 /* ...on a Hymod board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/incaip.h b/include/configs/incaip.h index 7d2715d094..e11d1843b9 100644 --- a/include/configs/incaip.h +++ b/include/configs/incaip.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */ #define CONFIG_INCA_IP 1 /* on a INCA-IP Board */ #define CONFIG_XWAY_SWAP_BYTES diff --git a/include/configs/ip04.h b/include/configs/ip04.h index d36ae43664..0efa2b7b9f 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -132,6 +132,7 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #undef CONFIG_SHOW_BOOT_PROGRESS /* Enable this if bootretry required; currently it's disabled */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 0695d2d37b..1990b2df15 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -118,12 +118,7 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ -#else -#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ -#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */ -#endif /*----------------------------------------------------------------------- * FLASH related @@ -151,61 +146,6 @@ #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif /* CONFIG_ENV_IS_IN_FLASH */ -/* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 405EX the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from location 0xfffff000...0xffffffff the - * NAND controller cannot be accessed since it is attached to CS0 too. - */ -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/sequoia/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ @@ -230,11 +170,9 @@ * * DDR Autocalibration Method_B is the default. */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */ #define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */ #undef CONFIG_PPC4xx_DDR_METHOD_A -#endif #define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE) @@ -416,7 +354,6 @@ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "logversion=2\0" \ "kernel_addr=fc000000\0" \ "fdt_addr=fc1e0000\0" \ @@ -434,16 +371,7 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_SNTP -/* - * Don't run the memory POST on the NAND-booting version. It will - * overwrite part of the U-Boot image which is already loaded from NAND - * to SDRAM. - */ -#if defined(CONFIG_NAND_U_BOOT) -#define CONFIG_SYS_POST_MEMORY_ON 0 -#else #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY -#endif /* POST support */ #define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ @@ -494,18 +422,6 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) -/* booting from NAND, so NAND chips select has to be on CS 0 */ -#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */ - -/* Memory Bank 1 (NOR-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x05806500 -#define CONFIG_SYS_EBC_PB1CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/ - -/* Memory Bank 0 (NAND-FLASH) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x018003c0 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1e000) -#else #define CONFIG_SYS_NAND_CS 1 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ @@ -515,7 +431,6 @@ /* Memory Bank 1 (NAND-FLASH) initialization */ #define CONFIG_SYS_EBC_PB1AP 0x018003c0 #define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000) -#endif /* Memory Bank 2 (FPGA) initialization */ #define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \ diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index 87c06389b4..7343c947ca 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -13,8 +13,6 @@ * (easy to change) */ -#define CONFIG_8260 1 -#define CONFIG_MPC8260 1 #define CONFIG_MUAS3001 1 #define CONFIG_SYS_TEXT_BASE 0xFF000000 diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index e929b23f28..f92496571b 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ #define CONFIG_PB1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 760dcaca4b..5dcd9cc0d0 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -293,7 +293,6 @@ * *****************************************************************************/ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/pr1.h b/include/configs/pr1.h index 03d4269584..e96ed4b4f2 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -135,7 +135,7 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index dd3babb505..98ed8bc97f 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 /* MIPS32 CPU core */ #define CONFIG_QEMU_MIPS #define CONFIG_MISC_INIT_R diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index a1422fca11..e8f5a4c9e8 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -12,7 +12,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS64 /* MIPS64 CPU core */ #define CONFIG_QEMU_MIPS #define CONFIG_MISC_INIT_R diff --git a/include/configs/redwood.h b/include/configs/redwood.h index 84d1e584a0..622b7c79e6 100644 --- a/include/configs/redwood.h +++ b/include/configs/redwood.h @@ -120,7 +120,6 @@ CONFIG_AMCC_DEF_ENV \ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=fc000000\0" \ "fdt_addr=fc1e0000\0" \ "ramdisk_addr=fc200000\0" \ diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h index 92318c3394..06211380d4 100644 --- a/include/configs/rsdproto.h +++ b/include/configs/rsdproto.h @@ -19,7 +19,6 @@ * (easy to change) */ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_RSD_PROTO 1 /* on a R&S Protocol Board */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 3750ad2c3d..0a694fb1be 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -524,7 +524,6 @@ * *****************************************************************************/ -#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */ #define CONFIG_SACSng 1 /* munged for the SACSng */ #define CONFIG_CPM2 1 /* Has a CPM2 */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 0e21ee3dc0..b6a5e6a59c 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -97,10 +97,7 @@ /* * Environment */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) -#define CONFIG_ENV_IS_IN_NAND /* use NAND for environ vars */ -#define CONFIG_ENV_IS_EMBEDDED /* use embedded environment */ -#elif defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store env in memory only */ #define CONFIG_ENV_SIZE (8 << 10) /* @@ -149,67 +146,10 @@ #endif /* CONFIG_CMD_FLASH */ /* - * IPL (Initial Program Loader, integrated inside CPU) - * Will load first 4k from NAND (SPL) into cache and execute it from there. - * - * SPL (Secondary Program Loader) - * Will load special U-Boot version (NUB) from NAND and execute it. This SPL - * has to fit into 4kByte. It sets up the CPU and configures the SDRAM - * controller and the NAND controller so that the special U-Boot image can be - * loaded from NAND to SDRAM. - * - * NUB (NAND U-Boot) - * This NAND U-Boot (NUB) is a special U-Boot version which can be started - * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * - * On 440EPx the SPL is copied to SDRAM before the NAND controller is - * set up. While still running from cache, I experienced problems accessing - * the NAND controller. sr - 2006-08-25 - */ -#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ -#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ -#define CONFIG_SYS_NAND_BOOT_SPL_DST (CONFIG_SYS_OCM_BASE + (12 << 10)) /* Copy SPL here */ -#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from */ - /* this addr */ -#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST) - -/* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) - */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ - -/* - * Now the NAND chip has to be defined (no autodetection used!) - */ -#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */ -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */ -#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ -#undef CONFIG_SYS_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ - -#define CONFIG_SYS_NAND_ECCSIZE 256 -#define CONFIG_SYS_NAND_ECCBYTES 3 -#define CONFIG_SYS_NAND_OOBSIZE 16 -#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7} - -#ifdef CONFIG_ENV_IS_IN_NAND -/* - * For NAND booting the environment is embedded in the U-Boot image. Please take - * look at the file board/amcc/sequoia/u-boot-nand.lds for details. - */ -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE) -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) -#endif - -/* * DDR SDRAM */ #define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \ - !defined(CONFIG_SYS_RAMBOOT) +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif #define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ @@ -247,7 +187,6 @@ CONFIG_AMCC_DEF_ENV_POWERPC \ CONFIG_AMCC_DEF_ENV_PPC_OLD \ CONFIG_AMCC_DEF_ENV_NOR_UPD \ - CONFIG_AMCC_DEF_ENV_NAND_UPD \ "kernel_addr=FC000000\0" \ "ramdisk_addr=FC180000\0" \ "" @@ -321,7 +260,7 @@ * overwrite part of the U-Boot image which is already loaded from NAND * to SDRAM. */ -#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) #define CONFIG_SYS_POST_MEMORY_ON 0 #else #define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY @@ -370,8 +309,7 @@ /* * On Sequoia CS0 and CS3 are switched when configuring for NAND booting */ -#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) && \ - !defined(CONFIG_SYS_RAMBOOT) +#if !defined(CONFIG_SYS_RAMBOOT) #define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ #define CONFIG_SYS_EBC_PB0AP 0x03017200 diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 241f21051e..1ff34d517d 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -116,7 +116,7 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 58bcdc8f47..370d97ffe0 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -145,7 +145,7 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) - +#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 0b102aa289..9247aefdb3 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -151,6 +151,10 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT +#ifdef CONFIG_SPL_BUILD +# define CONFIG_USE_PRIVATE_LIBGCC +#endif + #define CONFIG_SYS_GENERIC_BOARD /* Misc utility code */ diff --git a/include/configs/vct.h b/include/configs/vct.h index 99831169a3..5ab4de3274 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -25,7 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) diff --git a/include/os.h b/include/os.h index d6d6e5794e..fa4e39fc74 100644 --- a/include/os.h +++ b/include/os.h @@ -84,6 +84,14 @@ int os_open(const char *pathname, int flags); int os_close(int fd); /** + * Access to the OS unlink() system call + * + * \param pathname Path of file to delete + * \return 0 for success, other for error + */ +int os_unlink(const char *pathname); + +/** * Access to the OS exit() system call * * This exits with the supplied return code, which should be 0 to indicate diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 331b666459..5fcef9cebb 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -135,7 +135,7 @@ #define PLPRCR 0x00000284 -#elif defined(CONFIG_8260) +#elif defined(CONFIG_MPC8260) #define HID2 1011 diff --git a/include/spi_flash.h b/include/spi_flash.h index f79f0eacca..1a11286224 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -52,7 +52,7 @@ enum spi_dual_flash { * @sector_size: Sector size of this device * @nr_sectors: No.of sectors on this device * @e_rd_cmd: Enum list for read commands - * @flags: Importent param, for flash specific behaviour + * @flags: Important param, for flash specific behaviour */ struct spi_flash_params { const char *name; @@ -88,11 +88,11 @@ extern const struct spi_flash_params spi_flash_params_table[]; * @memory_map: Address of read-only SPI flash access * @read: Flash read ops: Read len bytes at offset into buf * Supported cmds: Fast Array Read - * @write: Flash write ops: Write len bytes from buf into offeset + * @write: Flash write ops: Write len bytes from buf into offset * Supported cmds: Page Program * @erase: Flash erase ops: Erase len bytes from offset * Supported cmds: Sector erase 4K, 32K, 64K - * return 0 - Sucess, 1 - Failure + * return 0 - Success, 1 - Failure */ struct spi_flash { struct spi_slave *spi; diff --git a/lib/Makefile b/lib/Makefile index dedb97b0ed..8814ff9671 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -65,3 +65,5 @@ obj-y += vsprintf.o obj-$(CONFIG_RANDOM_MACADDR) += rand.o obj-$(CONFIG_BOOTP_RANDOM_DELAY) += rand.o obj-$(CONFIG_CMD_LINK_LOCAL) += rand.o + +subdir-ccflags-$(CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED) += -O2 diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile deleted file mode 100644 index 4d084b313e..0000000000 --- a/nand_spl/board/amcc/acadia/Makefile +++ /dev/null @@ -1,88 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o cache.o -COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o pll.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin \ - $(nandobj)System.map - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)System.map: $(nandobj)u-boot-spl - @$(NM) $< | \ - grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ - sort > $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)/cache.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@ - -$(obj)/gpio.c: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/gpio.c $@ - -$(obj)/ndfc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ - -# from board directory -$(obj)/memory.c: - @rm -f $@ - ln -s $(SRCTREE)/board/amcc/acadia/memory.c $@ - -$(obj)/pll.c: - @rm -f $@ - ln -s $(SRCTREE)/board/amcc/acadia/pll.c $@ - -# from nand_spl directory -$(obj)/nand_boot.c: - @rm -f $@ - ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ - -# from drivers/mtd/nand directory -$(obj)/nand_ecc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk deleted file mode 100644 index d9ff10d5c2..0000000000 --- a/nand_spl/board/amcc/acadia/config.mk +++ /dev/null @@ -1,31 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 405EZ Reference Platform (Acadia) board -# - -# -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff, -# in the last 4kBytes of memory space in cache. -# We will copy this SPL into internal SRAM in start.S. So we set -# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here. -# -CONFIG_SYS_TEXT_BASE = 0xf8004000 - -# PAD_TO used to generate a 16kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000 -PAD_TO = 0xf8008000 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds deleted file mode 100644 index a7dac121d3..0000000000 --- a/nand_spl/board/amcc/acadia/u-boot.lds +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - .resetvec 0xf8004ffc : - { - KEEP(*(.resetvec)) - } = 0xffff - - .text : - { - start.o (.text) - nand_boot.o (.text) - ndfc.o (.text) - - *(.text) - *(.fixup) - } - _etext = .; - - .data : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - _edata = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) - *(.bss) - . = ALIGN(4); - } - - __bss_end = . ; -} diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile deleted file mode 100644 index f975b725eb..0000000000 --- a/nand_spl/board/amcc/bamboo/Makefile +++ /dev/null @@ -1,70 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o init.o resetvec.o -COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)/ndfc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ - -# from board directory -$(obj)/init.S: - @rm -f $@ - ln -s $(SRCTREE)/board/amcc/bamboo/init.S $@ - -# from nand_spl directory -$(obj)/nand_boot.c: - @rm -f $@ - ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ - -# from drivers/mtd/nand directory -$(obj)/nand_ecc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk deleted file mode 100644 index 6cc8fa30f3..0000000000 --- a/nand_spl/board/amcc/bamboo/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 440EP Reference Platform (Bamboo) board -# - -# -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, -# in the last 4kBytes of memory space in cache. -# We will copy this SPL into instruction-cache in start.S. So we set -# CONFIG_SYS_TEXT_BASE to starting address in i-cache here. -# -CONFIG_SYS_TEXT_BASE = 0x00800000 - -# PAD_TO used to generate a 16kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000 -PAD_TO = 0x00804000 - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c deleted file mode 100644 index df0dfc1a0d..0000000000 --- a/nand_spl/board/amcc/bamboo/sdram.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> -#include <asm/io.h> - -static void wait_init_complete(void) -{ - u32 val; - - do { - mfsdram(SDRAM0_MCSTS, val); - } while (!(val & 0x80000000)); -} - -/* - * phys_size_t initdram(int board_type) - * - * As the name already indicates, this function is called very early - * from start.S and configures the SDRAM with fixed values. This is needed, - * since the 440EP has no internal SRAM and the 4kB NAND_SPL loader has - * not enough free space to implement the complete I2C SPD DDR autodetection - * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM - * when booting from NAND flash. - * - * Note: - * As found out by Eugene O'Brien <eugene.obrien@advantechamt.com>, the fixed - * DDR setup has problems (U-Boot crashes randomly upon TFTP), when the DIMM - * modules are still plugged in. So it is recommended to remove the DIMM - * modules while using the NAND booting code with the fixed SDRAM setup! - */ -phys_size_t initdram(int board_type) -{ - /* - * Soft-reset SDRAM controller. - */ - mtsdr(SDR0_SRST, SDR0_SRST_DMC); - mtsdr(SDR0_SRST, 0x00000000); - - /* - * Disable memory controller. - */ - mtsdram(SDRAM0_CFG0, 0x00000000); - - /* - * Setup some default - */ - mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ - mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram(SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ - - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram(SDRAM0_B0CR, 0x00082001); - mtsdram(SDRAM0_TR0, 0x41094012); - mtsdram(SDRAM0_TR1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ - mtsdram(SDRAM0_RTR, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ - mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/ - - /* - * Enable the controller, then wait for DCEN to complete - */ - mtsdram(SDRAM0_CFG0, 0x80000000); /* DCEN=1, PMUD=0*/ - wait_init_complete(); - - return CONFIG_SYS_MBYTES_SDRAM << 20; -} diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds deleted file mode 100644 index c432368175..0000000000 --- a/nand_spl/board/amcc/bamboo/u-boot.lds +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - .resetvec 0x00800FFC : - { - KEEP(*(.resetvec)) - } = 0xffff - - .text : - { - start.o (.text) - init.o (.text) - nand_boot.o (.text) - sdram.o (.text) - ndfc.o (.text) - - *(.text) - *(.fixup) - } - _etext = .; - - .data : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - _edata = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) - *(.bss) - . = ALIGN(4); - } - - __bss_end = . ; -} diff --git a/nand_spl/board/amcc/canyonlands/Makefile b/nand_spl/board/amcc/canyonlands/Makefile deleted file mode 100644 index 250f083dc1..0000000000 --- a/nand_spl/board/amcc/canyonlands/Makefile +++ /dev/null @@ -1,75 +0,0 @@ -# -# (C) Copyright 2008 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS := start.o -SOBJS += init.o -SOBJS += resetvec.o -COBJS := ddr2_fixed.o -COBJS += nand_boot.o -COBJS += nand_ecc.o -COBJS += ndfc.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)/ndfc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ - -# from board directory -$(obj)/init.S: - @rm -f $@ - ln -s $(SRCTREE)/board/amcc/canyonlands/init.S $@ - -# from nand_spl directory -$(obj)/nand_boot.c: - @rm -f $@ - ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ - -# from drivers/mtd/nand directory -$(obj)/nand_ecc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ diff --git a/nand_spl/board/amcc/canyonlands/config.mk b/nand_spl/board/amcc/canyonlands/config.mk deleted file mode 100644 index 780b7ae375..0000000000 --- a/nand_spl/board/amcc/canyonlands/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2008 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 460EX Reference Platform (Canyonlands) board -# - -# -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On 460EX platforms the SPL is located at 0xfffff000...0xffffffff, -# in the last 4kBytes of memory space in cache. -# We will copy this SPL into internal SRAM in start.S. So we set -# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here. -# -CONFIG_SYS_TEXT_BASE = 0xE3003000 - -# PAD_TO used to generate a 128kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x20000 -PAD_TO = 0xE3023000 - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/nand_spl/board/amcc/canyonlands/ddr2_fixed.c b/nand_spl/board/amcc/canyonlands/ddr2_fixed.c deleted file mode 100644 index ce8515d513..0000000000 --- a/nand_spl/board/amcc/canyonlands/ddr2_fixed.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/io.h> -#include <asm/processor.h> - -/* - * This code can configure those two Crucial SODIMM's: - * - * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank) - * Crucial CT6464AC667.8FB - 512MB SO-DIMM (dual rank) - * - */ - -#define TEST_ADDR 0x10000000 -#define TEST_MAGIC 0x11223344 - -static void wait_init_complete(void) -{ - u32 val; - - do { - mfsdram(SDRAM_MCSTAT, val); - } while (!(val & 0x80000000)); -} - -static void ddr_start(void) -{ - mtsdram(SDRAM_MCOPT2, 0x28000000); - wait_init_complete(); -} - -static void ddr_init_common(void) -{ - /* - * Reset the DDR-SDRAM controller. - */ - mtsdr(SDR0_SRST, SDR0_SRST0_DMC); - mtsdr(SDR0_SRST, 0x00000000); - - /* - * These values are cloned from a running NOR booting - * Canyonlands with SPD-DDR2 detection and calibration - * enabled. This will only work for the same memory - * configuration as used here: - * - */ - mtsdram(SDRAM_MCOPT2, 0x00000000); - mtsdram(SDRAM_MODT0, 0x01000000); - mtsdram(SDRAM_WRDTR, 0x82000823); - mtsdram(SDRAM_CLKTR, 0x40000000); - mtsdram(SDRAM_MB0CF, 0x00000201); - mtsdram(SDRAM_RTR, 0x06180000); - mtsdram(SDRAM_SDTR1, 0x80201000); - mtsdram(SDRAM_SDTR2, 0x42103243); - mtsdram(SDRAM_SDTR3, 0x0A0D0D16); - mtsdram(SDRAM_MMODE, 0x00000632); - mtsdram(SDRAM_MEMODE, 0x00000040); - mtsdram(SDRAM_INITPLR0, 0xB5380000); - mtsdram(SDRAM_INITPLR1, 0x82100400); - mtsdram(SDRAM_INITPLR2, 0x80820000); - mtsdram(SDRAM_INITPLR3, 0x80830000); - mtsdram(SDRAM_INITPLR4, 0x80810040); - mtsdram(SDRAM_INITPLR5, 0x80800532); - mtsdram(SDRAM_INITPLR6, 0x82100400); - mtsdram(SDRAM_INITPLR7, 0x8A080000); - mtsdram(SDRAM_INITPLR8, 0x8A080000); - mtsdram(SDRAM_INITPLR9, 0x8A080000); - mtsdram(SDRAM_INITPLR10, 0x8A080000); - mtsdram(SDRAM_INITPLR11, 0x80000432); - mtsdram(SDRAM_INITPLR12, 0x808103C0); - mtsdram(SDRAM_INITPLR13, 0x80810040); - mtsdram(SDRAM_RDCC, 0x40000000); - mtsdram(SDRAM_RQDC, 0x80000038); - mtsdram(SDRAM_RFDC, 0x00000257); - - mtdcr(SDRAM_R0BAS, 0x0000F800); /* MQ0_B0BAS */ -} - -phys_size_t initdram(int board_type) -{ - /* - * First try init for this module: - * - * Crucial CT6464AC667.8FB - 512MB SO-DIMM (dual rank) - */ - - ddr_init_common(); - - /* - * Crucial CT6464AC667.8FB - 512MB SO-DIMM - */ - mtdcr(SDRAM_R0BAS, 0x0000F800); - mtdcr(SDRAM_R1BAS, 0x0400F800); - mtsdram(SDRAM_MCOPT1, 0x05122000); - mtsdram(SDRAM_CODT, 0x02800021); - mtsdram(SDRAM_MB1CF, 0x00000201); - - ddr_start(); - - /* - * Now test if the dual-ranked module is really installed - * by checking an address in the upper 256MByte region - */ - out_be32((void *)TEST_ADDR, TEST_MAGIC); - if (in_be32((void *)TEST_ADDR) != TEST_MAGIC) { - /* - * The test failed, so we assume that the single - * ranked module is installed: - * - * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank) - */ - - ddr_init_common(); - - mtdcr(SDRAM_R0BAS, 0x0000F000); - mtsdram(SDRAM_MCOPT1, 0x05322000); - mtsdram(SDRAM_CODT, 0x00800021); - - ddr_start(); - } - - return CONFIG_SYS_MBYTES_SDRAM << 20; -} diff --git a/nand_spl/board/amcc/canyonlands/u-boot.lds b/nand_spl/board/amcc/canyonlands/u-boot.lds deleted file mode 100644 index 6383b1a38f..0000000000 --- a/nand_spl/board/amcc/canyonlands/u-boot.lds +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - .resetvec 0xE3003FFC : - { - KEEP(*(.resetvec)) - } = 0xffff - - .text : - { - start.o (.text) - init.o (.text) - nand_boot.o (.text) - ddr2_fixed.o (.text) - ndfc.o (.text) - - *(.text) - *(.fixup) - } - _etext = .; - - .data : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - _edata = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) - *(.bss) - . = ALIGN(4); - } - - __bss_end = . ; -} diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile deleted file mode 100644 index a8d46899aa..0000000000 --- a/nand_spl/board/amcc/kilauea/Makefile +++ /dev/null @@ -1,77 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o cache.o -COBJS = 44x_spd_ddr2.o nand_boot.o nand_ecc.o ndfc.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)/44x_spd_ddr2.c: $(obj)/ecc.h - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c $@ - -$(obj)/cache.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/cache.S $@ - -$(obj)/ecc.h: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/ecc.h $@ - -$(obj)/ndfc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ - -# from nand_spl directory -$(obj)/nand_boot.c: - @rm -f $@ - ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ - -# from drivers/nand directory -$(obj)/nand_ecc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ diff --git a/nand_spl/board/amcc/kilauea/config.mk b/nand_spl/board/amcc/kilauea/config.mk deleted file mode 100644 index b596b1406c..0000000000 --- a/nand_spl/board/amcc/kilauea/config.mk +++ /dev/null @@ -1,32 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 405EX Reference Platform (Kilauea) board -# - -# -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff, -# in the last 4kBytes of memory space in cache. -# We will copy this SPL into SDRAM since we can't access the NAND -# controller at CS0 while running from this location. So we set -# CONFIG_SYS_TEXT_BASE to starting address in SDRAM here. -# -CONFIG_SYS_TEXT_BASE = 0x00800000 - -# PAD_TO used to generate a 16kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000 -PAD_TO = 0x00804000 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/nand_spl/board/amcc/kilauea/u-boot.lds b/nand_spl/board/amcc/kilauea/u-boot.lds deleted file mode 100644 index d7262e6c53..0000000000 --- a/nand_spl/board/amcc/kilauea/u-boot.lds +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - .resetvec 0x00800FFC : - { - KEEP(*(.resetvec)) - } = 0xffff - - .text : - { - start.o (.text) - nand_boot.o (.text) - ndfc.o (.text) - - *(.text) - *(.fixup) - } - _etext = .; - - .data : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - _edata = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) - *(.bss) - . = ALIGN(4); - } - - __bss_end = . ; -} diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile deleted file mode 100644 index b0385ae7a1..0000000000 --- a/nand_spl/board/amcc/sequoia/Makefile +++ /dev/null @@ -1,80 +0,0 @@ -# -# (C) Copyright 2006-2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk - -nandobj := $(OBJTREE)/nand_spl/ - -LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ - $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o init.o resetvec.o -COBJS = denali_data_eye.o nand_boot.o nand_ecc.o ndfc.o sdram.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ - -# create symbolic links for common files - -# from cpu directory -$(obj)/denali_data_eye.c: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/denali_data_eye.c $@ - -$(obj)/ndfc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/ndfc.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -s $(SRCTREE)/arch/powerpc/cpu/ppc4xx/start.S $@ - -# from board directory -$(obj)/init.S: - @rm -f $@ - ln -s $(SRCTREE)/board/amcc/sequoia/init.S $@ - -$(obj)/sdram.c: - @rm -f $@ - @rm -f $(obj)/sdram.h - ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $@ - ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)/sdram.h - -# from nand_spl directory -$(obj)/nand_boot.c: - @rm -f $@ - ln -s $(SRCTREE)/nand_spl/nand_boot.c $@ - -# from drivers/mtd/nand directory -$(obj)/nand_ecc.c: - @rm -f $@ - ln -s $(SRCTREE)/drivers/mtd/nand/nand_ecc.c $@ diff --git a/nand_spl/board/amcc/sequoia/config.mk b/nand_spl/board/amcc/sequoia/config.mk deleted file mode 100644 index ede7964d9f..0000000000 --- a/nand_spl/board/amcc/sequoia/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2006 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# AMCC 440EPx Reference Platform (Sequoia) board -# - -# -# CONFIG_SYS_TEXT_BASE for SPL: -# -# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, -# in the last 4kBytes of memory space in cache. -# We will copy this SPL into internal SRAM in start.S. So we set -# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here. -# -CONFIG_SYS_TEXT_BASE = 0xE0013000 - -# PAD_TO used to generate a 16kByte binary needed for the combined image -# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000 -PAD_TO = 0xE0017000 - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds deleted file mode 100644 index 45c0162af6..0000000000 --- a/nand_spl/board/amcc/sequoia/u-boot.lds +++ /dev/null @@ -1,50 +0,0 @@ -/* - * (C) Copyright 2006-2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc:common) -SECTIONS -{ - .resetvec 0xE0013FFC : - { - KEEP(*(.resetvec)) - } = 0xffff - - .text : - { - start.o (.text) - init.o (.text) - nand_boot.o (.text) - sdram.o (.text) - ndfc.o (.text) - - *(.text) - *(.fixup) - } - _etext = .; - - .data : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - _edata = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) - *(.bss) - . = ALIGN(4); - } - - __bss_end = . ; -} diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 59361f4d7a..36346fd161 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -55,11 +55,6 @@ endif include scripts/Kbuild.include -# Added for U-Boot -# We must include config.mk after Kbuild.include -# so that some config.mk can use cc-option. -include config.mk - # For backward compatibility check that these variables do not change save-cflags := $(CFLAGS) @@ -68,6 +63,11 @@ kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile) include $(kbuild-file) +# Added for U-Boot +asflags-y += $(PLATFORM_CPPFLAGS) +ccflags-y += $(PLATFORM_CPPFLAGS) +cppflags-y += $(PLATFORM_CPPFLAGS) + # If the save-* variables changed error out ifeq ($(KBUILD_NOPEDANTIC),) ifneq ("$(save-cflags)","$(CFLAGS)") diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 02b17b1057..d568fde2cc 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -101,13 +101,12 @@ basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" modname_flags = $(if $(filter 1,$(words $(modname))),\ -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") -# U-Boot also uses $(CPPFLAGS) -orig_c_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ +orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \ $(ccflags-y) $(CFLAGS_$(basetarget).o) _c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags)) -_a_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ +_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \ $(asflags-y) $(AFLAGS_$(basetarget).o) -_cpp_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) +_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F)) # # Enable gcov profiling flags for a file, directory or for all files depending diff --git a/spl/Makefile b/spl/Makefile index 57bd43bf45..bb3d3495e4 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -29,10 +29,6 @@ ifeq ($(CONFIG_TPL_BUILD),y) KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD endif -# Enable garbage collection of un-used sections for SPL -KBUILD_CFLAGS += -ffunction-sections -fdata-sections -LDFLAGS_FINAL += --gc-sections - ifeq ($(CONFIG_TPL_BUILD),y) export CONFIG_TPL_BUILD SPL_BIN := u-boot-tpl @@ -50,8 +46,14 @@ endif include $(TOPDIR)/config.mk +# Enable garbage collection of un-used sections for SPL +KBUILD_CFLAGS += -ffunction-sections -fdata-sections +LDFLAGS_FINAL += --gc-sections + # FIX ME -c_flags := $(KBUILD_CFLAGS) $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS) +cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \ + $(NOSTDINC_FLAGS) +c_flags := $(KBUILD_CFLAGS) $(cpp_flags) # Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL) quiet_cmd_autoconf = GEN $@ @@ -132,7 +134,7 @@ u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y))) libs-y := $(patsubst %/, %/built-in.o, $(libs-y)) # Add GCC lib -ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") +ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC) endif @@ -228,9 +230,6 @@ PHONY += $(u-boot-spl-dirs) $(u-boot-spl-dirs): $(Q)$(MAKE) $(build)=$@ -# FIX ME -cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS) - quiet_cmd_cpp_lds = LDS $@ cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \ -x assembler-with-cpp -P -o $@ $< diff --git a/test/command_ut.c b/test/command_ut.c index 620a297d45..aaa1ee25d0 100644 --- a/test/command_ut.c +++ b/test/command_ut.c @@ -7,6 +7,9 @@ #define DEBUG #include <common.h> +#ifdef CONFIG_SANDBOX +#include <os.h> +#endif static const char test_cmd[] = "setenv list 1\n setenv list ${list}2; " "setenv list ${list}3\0" @@ -65,7 +68,8 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) run_command("if test " expr " ; then " \ "setenv " #name "_" #expected_result " y; else " \ "setenv " #name "_" #expected_result " n; fi", 0); \ - assert(!strcmp(#expected_result, getenv(#name "_" #expected_result))); + assert(!strcmp(#expected_result, getenv(#name "_" #expected_result))); \ + setenv(#name "_" #expected_result, NULL); /* Basic operators */ HUSH_TEST(streq, "aaa = aaa", y); @@ -137,12 +141,30 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) HUSH_TEST(or_1_0_inv_inv, "! ! aaa = aaa -o ! ! bbb != bbb", y); HUSH_TEST(or_1_1_inv_inv, "! ! aaa = aaa -o ! ! bbb = bbb", y); + setenv("ut_var_nonexistent", NULL); + setenv("ut_var_exists", "1"); + HUSH_TEST(z_varexp_quoted, "-z \"$ut_var_nonexistent\"", y); + HUSH_TEST(z_varexp_quoted, "-z \"$ut_var_exists\"", n); + setenv("ut_var_exists", NULL); + + run_command("setenv ut_var_space \" \"", 0); + assert(!strcmp(getenv("ut_var_space"), " ")); + run_command("setenv ut_var_test $ut_var_space", 0); + assert(!getenv("ut_var_test")); + run_command("setenv ut_var_test \"$ut_var_space\"", 0); + assert(!strcmp(getenv("ut_var_test"), " ")); + run_command("setenv ut_var_test \" 1${ut_var_space}${ut_var_space} 2 \"", 0); + assert(!strcmp(getenv("ut_var_test"), " 1 2 ")); + setenv("ut_var_space", NULL); + setenv("ut_var_test", NULL); + #ifdef CONFIG_SANDBOX - /* - * File existence - * This assume U-Boot sandbox is run from the U-Boot build directory - */ - HUSH_TEST(e, "-e host - u-boot", y); + /* File existence */ + HUSH_TEST(e, "-e host - creating_this_file_breaks_uboot_unit_test", n); + run_command("sb save host - creating_this_file_breaks_uboot_unit_test 0 1", 0); + HUSH_TEST(e, "-e host - creating_this_file_breaks_uboot_unit_test", y); + /* Perhaps this could be replaced by an "rm" shell command one day */ + assert(!os_unlink("creating_this_file_breaks_uboot_unit_test")); HUSH_TEST(e, "-e host - creating_this_file_breaks_uboot_unit_test", n); #endif #endif |