summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/t3corp/chip_config.c16
-rw-r--r--board/t3corp/init.S8
-rw-r--r--board/t3corp/t3corp.c2
-rw-r--r--include/configs/t3corp.h27
4 files changed, 34 insertions, 19 deletions
diff --git a/board/t3corp/chip_config.c b/board/t3corp/chip_config.c
index c00bf16bd9..98ab49f49f 100644
--- a/board/t3corp/chip_config.c
+++ b/board/t3corp/chip_config.c
@@ -27,13 +27,27 @@
struct ppc4xx_config ppc4xx_config_val[] = {
{
- "600", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
+ "600-67", "CPU: 600 PLB: 200 OPB: 67 EBC: 67",
+ {
+ 0x86, 0x80, 0xce, 0x1f, 0x7d, 0x80, 0x00, 0xe0,
+ 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
+ "600-100", "CPU: 600 PLB: 200 OPB: 100 EBC: 100",
{
0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0,
0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
}
},
{
+ "667", "CPU: 667 PLB: 166 OPB: 83 EBC: 83",
+ {
+ 0x06, 0x80, 0xbb, 0x14, 0x99, 0x82, 0x00, 0xa0,
+ 0x40, 0x88, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00
+ }
+ },
+ {
"800", "CPU: 800 PLB: 200 OPB: 100 EBC: 100",
{
0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0,
diff --git a/board/t3corp/init.S b/board/t3corp/init.S
index 4a4217fc8e..ecd35ff7b6 100644
--- a/board/t3corp/init.S
+++ b/board/t3corp/init.S
@@ -81,11 +81,13 @@ tlbtab:
tlbentry(CONFIG_SYS_PCIE_BASE, SZ_16K, 0x08010000, 0xc, AC_RW | SA_IG)
/* TLB-entry for FPGA(s) */
- tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_1M, CONFIG_SYS_FPGA1_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA1_BASE, SZ_16M, CONFIG_SYS_FPGA1_BASE, 4,
AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_1M, CONFIG_SYS_FPGA2_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA1_BASE + (16 << 20), SZ_16M,
+ CONFIG_SYS_FPGA1_BASE + (16 << 20), 4, AC_RW | SA_IG)
+ tlbentry(CONFIG_SYS_FPGA2_BASE, SZ_16M, CONFIG_SYS_FPGA2_BASE, 4,
AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_1M, CONFIG_SYS_FPGA3_BASE, 4,
+ tlbentry(CONFIG_SYS_FPGA3_BASE, SZ_16M, CONFIG_SYS_FPGA3_BASE, 4,
AC_RW | SA_IG)
/* TLB-entry for OCM */
diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c
index 8ffa321690..ddf58970a3 100644
--- a/board/t3corp/t3corp.c
+++ b/board/t3corp/t3corp.c
@@ -45,7 +45,7 @@ int board_early_init_f(void)
mtdcr(UIC1SR, 0xffffffff); /* clear all */
mtdcr(UIC1ER, 0x00000000); /* disable all */
mtdcr(UIC1CR, 0x00000000); /* all non-critical */
- mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */
+ mtdcr(UIC1PR, 0x7fffffff); /* per ref-board manual */
mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
mtdcr(UIC1SR, 0xffffffff); /* clear all */
diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h
index 0ecc5b10de..7b88601ed4 100644
--- a/include/configs/t3corp.h
+++ b/include/configs/t3corp.h
@@ -74,8 +74,8 @@
#define CONFIG_SYS_FLASH_SIZE (64 << 20)
#define CONFIG_SYS_FPGA1_BASE 0xe0000000
-#define CONFIG_SYS_FPGA2_BASE 0xe0100000
-#define CONFIG_SYS_FPGA3_BASE 0xe0200000
+#define CONFIG_SYS_FPGA2_BASE 0xe2000000
+#define CONFIG_SYS_FPGA3_BASE 0xe4000000
#define CONFIG_SYS_BOOT_BASE_ADDR 0xFF000000 /* EBC Boot Space */
#define CONFIG_SYS_FLASH_BASE_PHYS_H 0x4
@@ -84,14 +84,12 @@
(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) \
| (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
-#define CONFIG_SYS_OCM_BASE 0xE3000000 /* OCM: 64k */
+#define CONFIG_SYS_OCM_BASE 0xE7000000 /* OCM: 64k */
#define CONFIG_SYS_SRAM_BASE 0xE8000000 /* SRAM: 256k */
#define CONFIG_SYS_LOCAL_CONF_REGS 0xEF000000
#define CONFIG_SYS_PERIPHERAL_BASE 0xEF600000 /* internal periph. */
-#define CONFIG_SYS_AHB_BASE 0xE2000000 /* int. AHB periph. */
-
/*
* Initial RAM & stack pointer (placed in OCM)
*/
@@ -121,6 +119,7 @@
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
@@ -144,10 +143,13 @@
/*
* DDR2 SDRAM
*/
+#define CONFIG_SYS_MBYTES_SDRAM 256
+#define CONFIG_DDR_ECC
#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
#undef CONFIG_PPC4xx_DDR_METHOD_A
+#define CONFIG_DDR_RFDC_FIXED 0x000001D7 /* optimal value */
/* DDR1/2 SDRAM Device Control Register Data Values */
/* Memory Queue */
@@ -162,9 +164,6 @@
#define CONFIG_SYS_SDRAM_CONF1HB 0x80001C80
#define CONFIG_SYS_SDRAM_CONFPATHB 0x10a68000
-#define CONFIG_DDR_ECC
-#define CONFIG_SYS_MBYTES_SDRAM 256
-
#define CAS_LATENCY JEDEC_MA_MR_CL_DDR2_5_0_CLK
/* DDR1/2 SDRAM Device Control Register Data Values */
@@ -417,7 +416,7 @@
#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -426,7 +425,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA1_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_32MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
@@ -434,7 +433,7 @@
#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -443,7 +442,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA2_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
@@ -451,7 +450,7 @@
#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(5) | \
EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(4) | \
+ EBC_BXAP_OEN_ENCODE(3) | \
EBC_BXAP_WBN_ENCODE(0) | \
EBC_BXAP_WBF_ENCODE(0) | \
EBC_BXAP_TH_ENCODE(1) | \
@@ -460,7 +459,7 @@
EBC_BXAP_BEM_RW | \
EBC_BXAP_PEN_DISABLED)
#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA3_BASE) | \
- EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BS_16MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_32BIT)
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-05 20:12:07 +0000