summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG30
-rw-r--r--MAKEALL12
-rw-r--r--Makefile1
-rw-r--r--README27
-rw-r--r--board/eltec/mhpc/mhpc.c2
-rw-r--r--board/fads/fads.c865
-rw-r--r--board/flagadm/flagadm.c4
-rw-r--r--board/genietv/genietv.c2
-rw-r--r--board/gth/gth.c2
-rw-r--r--board/ivm/ivm.c4
-rw-r--r--board/lantec/lantec.c4
-rw-r--r--board/lwmon/lwmon.c6
-rw-r--r--board/mpc8260ads/mpc8260ads.c68
-rw-r--r--board/mvs1/u-boot.lds2
-rw-r--r--board/r360mpi/r360mpi.c2
-rw-r--r--board/siemens/CCM/ccm.c2
-rw-r--r--board/siemens/pcu_e/pcu_e.c8
-rw-r--r--board/spd8xx/spd8xx.c4
-rw-r--r--board/v37/v37.c2
-rw-r--r--common/cmd_i2c.c3
-rw-r--r--cpu/mpc8xx/cpu.c54
-rw-r--r--cpu/mpc8xx/cpu_init.c1
-rw-r--r--cpu/mpc8xx/fec.c3
-rw-r--r--cpu/mpc8xx/interrupts.c4
-rw-r--r--cpu/mpc8xx/scc.c6
-rw-r--r--cpu/mpc8xx/serial.c28
-rw-r--r--cpu/mpc8xx/speed.c35
-rw-r--r--drivers/serial.c1
-rw-r--r--include/common.h14
-rw-r--r--include/commproc.h6
-rw-r--r--include/configs/ADS860.h11
-rw-r--r--include/configs/FADS823.h1
-rw-r--r--include/configs/FADS850SAR.h1
-rw-r--r--include/configs/FADS860T.h89
-rw-r--r--include/configs/IAD210.h2
-rw-r--r--include/configs/IVML24.h20
-rw-r--r--include/configs/IVMS8.h20
-rw-r--r--include/configs/MPC8260ADS.h77
-rw-r--r--include/configs/MPC86xADS.h438
-rw-r--r--include/configs/RPXClassic.h3
-rw-r--r--include/configs/SPD823TS.h8
-rw-r--r--include/configs/pcu_e.h10
-rw-r--r--include/configs/v37.h3
-rw-r--r--include/mpc8xx.h287
-rw-r--r--include/pcmcia.h2
-rw-r--r--include/version.h2
-rw-r--r--post/ether.c4
47 files changed, 1468 insertions, 712 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 8c27c76b5d2..66621ba90b1 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,4 +1,34 @@
======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
+* Patch by Martin Krause, 17 Jul 2003:
+ add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+
+* Patch by Richard Woodruff, 17 July 03:
+ - Fixed bug in OMAP1510 baud rate divisor settings.
+
+* Patch by Nye Liu, 16 July 2003:
+ MPC860FADS fixes:
+ - add MPC86xADS support (uses MPC86xADS.h)
+ - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+ o PLPRCR changes
+ o BRG changes (EXTAL/XTAL restricted to 10MHz)
+ o don't trust gclk() software measurement by default, depend on
+ CONFIG_8xx_GCLK_FREQ
+ - add DRAM SIMM not installed detection
+ - use more "correct" SDRAM initialization sequence
+ - allow different SDRAM sizes (8xxADS has 8M)
+ - default DER is 0
+ - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+ - rename MAMR/MBMR defines to be more consistent. Should eventually
+ be merged into MxMR to better reflect the PowerQUICC datasheet.
+
+* Patch by Yuli Barcohen, 16 Jul 2003:
+ support new Motorola PQ2FADS-ZU evaluation board which replaced
+ MPC8260ADS and MPC8266ADS
+
+======================================================================
Changes for U-Boot 0.4.4:
======================================================================
diff --git a/MAKEALL b/MAKEALL
index 2f0a5d9f9e8..a630cd26705 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -39,12 +39,12 @@ LIST_8xx=" \
IP860 IVML24 IVML24_128 IVML24_256 \
IVMS8 IVMS8_128 IVMS8_256 KUP4K \
LANTEC lwmon MBX MBX860T \
- MHPC MVS1 NETVIA NETVIA_V2 \
- NX823 pcu_e R360MPI RBC823 \
- rmu RPXClassic RPXlite RRvision \
- SM850 SPD823TS svm_sc8xx SXNI855T \
- TOP860 TQM823L TQM823L_LCD TQM850L \
- TQM855L TQM860L v37 \
+ MHPC MPC86xADS MVS1 NETVIA \
+ NETVIA_V2 NX823 pcu_e R360MPI \
+ RBC823 rmu RPXClassic RPXlite \
+ RRvision SM850 SPD823TS svm_sc8xx \
+ SXNI855T TOP860 TQM823L TQM823L_LCD \
+ TQM850L TQM855L TQM860L v37 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 37eca7d9bf6..e10e4185bcf 100644
--- a/Makefile
+++ b/Makefile
@@ -227,6 +227,7 @@ ETX094_config : unconfig
FADS823_config \
FADS850SAR_config \
+MPC86xADS_config \
FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
diff --git a/README b/README
index 8b2b1af2fc0..1c40711837c 100644
--- a/README
+++ b/README
@@ -197,7 +197,7 @@ Directory Hierarchy:
- board/lwmon Files specific to LWMON boards
- board/mbx8xx Files specific to MBX boards
- board/mpc8260ads
- Files specific to MMPC8260ADS boards
+ Files specific to MPC8260ADS and PQ2FADS-ZU boards
- board/mpl/ Files specific to boards manufactured by MPL
- board/mpl/common Common files for MPL boards
- board/mpl/pip405 Files specific to PIP405 boards
@@ -383,6 +383,14 @@ The following options need to be configured:
the lcd display every second with
a "rotator" |\-/|\-/
+- Board flavour: (if CONFIG_MPC8260ADS is defined)
+ CONFIG_ADSTYPE
+ Possible values are:
+ CFG_8260ADS - original MPC8260ADS
+ CFG_8266ADS - MPC8266ADS (untested)
+ CFG_PQ2FADS - PQ2FADS-ZU
+
+
- MPC824X Family Member (if CONFIG_MPC824X is defined)
Define exactly one of
CONFIG_MPC8240, CONFIG_MPC8245
@@ -989,8 +997,8 @@ The following options need to be configured:
is FALSE, it clears it (low).
eg: #define I2C_SDA(bit) \
- if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
- else immr->im_cpm.cp_pbdat &= ~PB_SDA
+ if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
I2C_SCL(bit)
@@ -998,8 +1006,8 @@ The following options need to be configured:
is FALSE, it clears it (low).
eg: #define I2C_SCL(bit) \
- if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
- else immr->im_cpm.cp_pbdat &= ~PB_SCL
+ if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
I2C_DELAY
@@ -1687,9 +1695,10 @@ Low Level (hardware related) configuration options:
- CFG_DEFAULT_IMMR:
Default address of the IMMR after system reset.
- Needed on some 8260 systems (MPC8260ADS and RPXsuper)
- to be able to adjust the position of the IMMR
- register after a reset.
+
+ Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU,
+ and RPXsuper) to be able to adjust the position of
+ the IMMR register after a reset.
- Floppy Disk Support:
CFG_FDC_DRIVE_NUMBER
@@ -1862,7 +1871,7 @@ configurations; the following names are supported:
GENIETV_config TQM823L_config PIP405_config
GEN860T_config EBONY_config FPS860L_config
ELPT860_config cmi_mpc5xx_config NETVIA_config
- at91rm9200dk_config omap1510inn_config
+ at91rm9200dk_config omap1510inn_config MPC8260ADS_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/eltec/mhpc/mhpc.c b/board/eltec/mhpc/mhpc.c
index 83952d8388b..f084ce3e5cb 100644
--- a/board/eltec/mhpc/mhpc.c
+++ b/board/eltec/mhpc/mhpc.c
@@ -254,7 +254,7 @@ long int initdram (int board_type)
upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */
- memctl->memc_mbmr = MAMR_GPL_B4DIS;
+ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* should this be mamr? - NTL */
memctl->memc_mptpr = MPTPR_PTP_DIV64;
memctl->memc_mar = 0x00008800;
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 0519771966b..3856b45cdf2 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -32,157 +32,155 @@
#if defined(CONFIG_DRAM_50MHZ)
/* 50MHz tables */
-const uint dram_60ns[] =
+static const uint dram_60ns[] =
{ 0x8fffec24, 0x0fffec04, 0x0cffec04, 0x00ffec04,
- 0x00ffec00, 0x37ffec47, 0xffffffff, 0xffffffff,
+ 0x00ffec00, 0x37ffec47, _NOT_USED_, _NOT_USED_,
0x8fffec24, 0x0fffec04, 0x08ffec04, 0x00ffec0c,
0x03ffec00, 0x00ffec44, 0x00ffcc08, 0x0cffcc44,
0x00ffec0c, 0x03ffec00, 0x00ffec44, 0x00ffcc00,
- 0x3fffc847, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x3fffc847, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
- 0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint dram_70ns[] =
+static const uint dram_70ns[] =
{ 0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
- 0x00ffcc00, 0x37ffcc47, 0xffffffff, 0xffffffff,
+ 0x00ffcc00, 0x37ffcc47, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0fffcc04, 0x0cffcc04, 0x00ffcc04,
0x00ffcc08, 0x0cffcc44, 0x00ffec0c, 0x03ffec00,
0x00ffec44, 0x00ffcc08, 0x0cffcc44, 0x00ffec04,
- 0x00ffec00, 0x3fffec47, 0xffffffff, 0xffffffff,
+ 0x00ffec00, 0x3fffec47, _NOT_USED_, _NOT_USED_,
0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x11bfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fafcc24, 0x0fafcc04, 0x0cafcc00, 0x03afcc4c,
0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
- 0x7fffcc06, 0xffffcc85, 0xffffcc05, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ 0x7fffcc06, 0xffffcc85, 0xffffcc05, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint edo_60ns[] =
+static const uint edo_60ns[] =
{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
- 0x00f3ec00, 0x37f7ec47, 0xffffffff, 0xffffffff,
+ 0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_,
0x8fffec24, 0x0ffbec04, 0x0cf3ec04, 0x00f3ec0c,
0x0cf3ec00, 0x00f3ec4c, 0x0cf3ec00, 0x00f3ec4c,
0x0cf3ec00, 0x00f3ec44, 0x03f3ec00, 0x3ff7ec47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc4f, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
- 0xffffcc85, 0xffffcc05, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint edo_70ns[] =
+static const uint edo_70ns[] =
{ 0x8ffbcc24, 0x0ff3cc04, 0x0cf3cc04, 0x00f3cc04,
- 0x00f3cc00, 0x37f7cc47, 0xffffffff, 0xffffffff,
+ 0x00f3cc00, 0x37f7cc47, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc0c,
0x03f3cc00, 0x00f3cc44, 0x00f3ec0c, 0x0cf3ec00,
0x00f3ec4c, 0x03f3ec00, 0x00f3ec44, 0x00f3cc00,
- 0x33f7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x33f7cc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
- 0x0cafcc00, 0x33bfcc47, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x0cafcc00, 0x33bfcc47, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xe0ffcc84, 0x00ffcc04, 0x00ffcc04, 0x0fffcc04,
- 0x7fffcc04, 0xffffcc86, 0xffffcc05, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ 0x7fffcc04, 0xffffcc86, 0xffffcc05, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
#elif defined(CONFIG_DRAM_25MHZ)
/* 25MHz tables */
-const uint dram_60ns[] =
-{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+static const uint dram_60ns[] =
+{ 0x0fffcc04, 0x08ffcc00, 0x33ffcc47, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
- 0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x08ffcc00, 0x33ffcc47, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
- 0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x31bfcc43, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint dram_70ns[] =
+static const uint dram_70ns[] =
{ 0x0fffec04, 0x08ffec04, 0x00ffec00, 0x3fffcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fffcc24, 0x0fffcc04, 0x08ffcc00, 0x03ffcc4c,
0x08ffcc00, 0x03ffcc4c, 0x08ffcc00, 0x03ffcc4c,
- 0x08ffcc00, 0x33ffcc47, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x08ffcc00, 0x33ffcc47, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x0fafcc04, 0x08afcc00, 0x3fbfcc47, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fafcc04, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
0x01afcc4c, 0x0cafcc00, 0x01afcc4c, 0x0cafcc00,
- 0x31bfcc43, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x31bfcc43, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint edo_60ns[] =
+static const uint edo_60ns[] =
{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0ffbcc04, 0x09f3cc0c, 0x09f3cc0c, 0x09f3cc0c,
- 0x08f3cc00, 0x3ff7cc47, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x08f3cc00, 0x3ff7cc47, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fefcc04, 0x08afcc00, 0x07afcc48, 0x08afcc48,
- 0x08afcc48, 0x39bfcc47, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x08afcc48, 0x39bfcc47, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x80ffcc84, 0x13ffcc04, 0xffffcc87, 0xffffcc05,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-const uint edo_70ns[] =
+static const uint edo_70ns[] =
{ 0x0ffbcc04, 0x0cf3cc04, 0x00f3cc00, 0x33f7cc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0ffbec04, 0x08f3ec04, 0x03f3ec48, 0x08f3cc00,
0x0ff3cc4c, 0x08f3cc00, 0x0ff3cc4c, 0x08f3cc00,
- 0x3ff7cc47, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x3ff7cc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fefcc04, 0x08afcc04, 0x00afcc00, 0x3fbfcc47,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0x0fefcc04, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
0x07afcc4c, 0x08afcc00, 0x07afcc4c, 0x08afcc00,
- 0x37bfcc47, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x37bfcc47, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
0xc0ffcc84, 0x01ffcc04, 0x7fffcc86, 0xffffcc05,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0x33ffcc07, 0xffffffff, 0xffffffff, 0xffffffff };
-
-
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
#else
-#error dram not correct defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
+#error dram not correctly defined - use CONFIG_DRAM_25MHZ or CONFIG_DRAM_50MHZ
#endif
/* ------------------------------------------------------------------------- */
@@ -192,31 +190,11 @@ const uint edo_70ns[] =
* Check Board Identity:
*/
-int checkboard (void)
+#if defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS)
+static void checkdboard(void)
{
- uint k;
-
- puts ("Board: ");
-
-#ifdef CONFIG_FADS
- k = (*((uint *)BCSR3) >> 24) & 0x3f;
-
- switch(k) {
- case 0x03 :
- case 0x20 :
- case 0x21 :
- case 0x22 :
- case 0x23 :
- case 0x24 :
- case 0x2a :
- case 0x3f :
- puts ("FADS");
- break;
-
- default :
- printf("unknown board (0x%02x)\n", k);
- return -1;
- }
+ /* get db type from BCSR 3 */
+ uint k = (*((uint *)BCSR3) >> 24) & 0x3f;
printf(" with db ");
@@ -237,147 +215,202 @@ int checkboard (void)
puts ("MPC860SAR");
break;
case 0x24 :
+ case 0x2A :
puts ("MPC860T");
break;
- case 0x3f :
+ case 0x3F :
puts ("MPC850SAR");
break;
+ default : printf("0x%x", k);
}
+}
+#endif /* defined(CONFIG_FADS) && !defined(CONFIG_MPC86xADS) */
- printf(" rev ");
+int checkboard (void)
+{
+ /* get revision from BCSR 3 */
+ uint r = (((*((uint *) BCSR3) >> 23) & 1) << 3)
+ | (((*((uint *) BCSR3) >> 19) & 1) << 2)
+ | (((*((uint *) BCSR3) >> 16) & 3));
- k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
- | (((*((uint *)BCSR3) >> 19) & 1) << 2)
- | (((*((uint *)BCSR3) >> 16) & 3));
+ puts ("Board: ");
- switch(k) {
- case 0x01 :
- puts ("ENG or PILOT\n");
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS
+ puts ("MPC86xADS");
+# else
+ puts ("FADS");
+ checkdboard ();
+# endif /* !CONFIG_MPC86xADS */
+ printf (" rev ");
+
+ switch (r) {
+ case 0x00:
+ puts ("ENG\n");
+ break;
+ case 0x01:
+ puts ("PILOT\n");
break;
-
default:
- printf("unknown (0x%x)\n", k);
- return -1;
+ printf ("unknown (0x%x)\n", r);
+ return (-1);
}
-
- return 0;
#endif /* CONFIG_FADS */
#ifdef CONFIG_ADS
- printf("ADS rev ");
-
- k = (((*((uint *)BCSR3) >> 23) & 1) << 3)
- | (((*((uint *)BCSR3) >> 19) & 1) << 2)
- | (((*((uint *)BCSR3) >> 16) & 3));
-
- switch(k) {
- case 0x00 : puts ("ENG - this board sucks, check the errata, not supported\n");
- return -1;
- case 0x01 : puts ("PILOT - warning, read errata \n"); break;
- case 0x02 : puts ("A - warning, read errata \n"); break;
- case 0x03 : puts ("B \n"); break;
- default : printf ("unknown revision (0x%x)\n", k); return -1;
- }
-
- return 0;
+ printf ("ADS rev ");
+
+ switch (r) {
+ case 0x00:
+ puts ("ENG - this board sucks, check the errata, not supported\n");
+ return -1;
+ case 0x01:
+ puts ("PILOT - warning, read errata \n");
+ break;
+ case 0x02:
+ puts ("A - warning, read errata \n");
+ break;
+ case 0x03:
+ puts ("B \n");
+ break;
+ default:
+ printf ("unknown revision (0x%x)\n", r);
+ return (-1);
+ }
#endif /* CONFIG_ADS */
+ return 0;
}
/* ------------------------------------------------------------------------- */
-int _draminit(uint base, uint noMbytes, uint edo, uint delay)
+static long int dram_size (long int *base, long int maxsize)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr=base;
+ ulong cnt, val;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
- /* init upm */
+ for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) {
+ addr = base + cnt; /* pointer arith! */
- switch(delay)
- {
- case 70:
- {
- if(edo)
- {
- upmconfig(UPMA, (uint *) edo_70ns, sizeof(edo_70ns)/sizeof(uint));
- }
- else
- {
- upmconfig(UPMA, (uint *) dram_70ns, sizeof(dram_70ns)/sizeof(uint));
- }
-
- break;
- }
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
- case 60:
- {
- if(edo)
- {
- upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
- }
- else
- {
- upmconfig(UPMA, (uint *) dram_60ns, sizeof(dram_60ns)/sizeof(uint));
- }
-
- break;
- }
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
- default :
- return -1;
+ /* check at base address */
+ if ((val = *addr) != 0) {
+ *addr = save[i];
+ return (0);
}
- memctl->memc_mptpr = 0x0400; /* divide by 16 */
+ for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
+ addr = base + cnt; /* pointer arith! */
- switch(noMbytes)
- {
+ val = *addr;
+ *addr = save[--i];
- case 8: /* 8 Mbyte uses both CS3 and CS2 */
- {
- memctl->memc_mamr = 0x13a01114;
- memctl->memc_or3 = 0xffc00800;
- memctl->memc_br3 = 0x00400081 + base;
- memctl->memc_or2 = 0xffc00800;
- break;
+ if (val != (~cnt)) {
+ return (cnt * sizeof (long));
}
+ }
+ return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+static int _draminit (uint base, uint noMbytes, uint edo, uint delay)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ /* init upm */
- case 4: /* 4 Mbyte uses only CS2 */
- {
- memctl->memc_mamr = 0x13a01114;
- memctl->memc_or2 = 0xffc00800;
- break;
+ switch (delay) {
+ case 70:
+ if (edo) {
+ upmconfig (UPMA, (uint *) edo_70ns,
+ sizeof (edo_70ns) / sizeof (uint));
+ } else {
+ upmconfig (UPMA, (uint *) dram_70ns,
+ sizeof (dram_70ns) / sizeof (uint));
}
- case 32: /* 32 Mbyte uses both CS3 and CS2 */
- {
- memctl->memc_mamr = 0x13b01114;
- memctl->memc_or3 = 0xff000800;
- memctl->memc_br3 = 0x01000081 + base;
- memctl->memc_or2 = 0xff000800;
- break;
+ break;
+
+ case 60:
+ if (edo) {
+ upmconfig (UPMA, (uint *) edo_60ns,
+ sizeof (edo_60ns) / sizeof (uint));
+ } else {
+ upmconfig (UPMA, (uint *) dram_60ns,
+ sizeof (dram_60ns) / sizeof (uint));
}
- case 16: /* 16 Mbyte uses only CS2 */
- {
-#ifdef CONFIG_ADS
- memctl->memc_mamr = 0x60b21114;
+ break;
+
+ default:
+ return -1;
+ }
+
+ memctl->memc_mptpr = 0x0400; /* divide by 16 */
+
+ switch (noMbytes) {
+ case 4: /* 4 Mbyte uses only CS2 */
+ memctl->memc_mamr = 0x13a01114; /* PTA 0x13 AMA 010 */
+ memctl->memc_or2 = 0xffc00800; /* 4M */
+ break;
+
+ case 8: /* 8 Mbyte uses both CS3 and CS2 */
+ memctl->memc_mamr = 0x13a01114; /* PTA 0x13 AMA 010 */
+ memctl->memc_or3 = 0xffc00800; /* 4M */
+ memctl->memc_br3 = 0x00400081 + base;
+ memctl->memc_or2 = 0xffc00800; /* 4M */
+ break;
+
+ case 16: /* 16 Mbyte uses only CS2 */
+#ifdef CONFIG_ADS /* XXX: why PTA=0x60 only in 16M case? - NTL */
+ memctl->memc_mamr = 0x60b21114; /* PTA 0x60 AMA 011 */
#else
- memctl->memc_mamr = 0x13b01114;
+ memctl->memc_mamr = 0x13b01114; /* PTA 0x13 AMA 011 */
#endif
- memctl->memc_or2 = 0xff000800;
- break;
- }
+ memctl->memc_or2 = 0xff000800; /* 16M */
+ break;
+
+ case 32: /* 32 Mbyte uses both CS3 and CS2 */
+ memctl->memc_mamr = 0x13b01114; /* PTA 0x13 AMA 011 */
+ memctl->memc_or3 = 0xff000800; /* 16M */
+ memctl->memc_br3 = 0x01000081 + base;
+ memctl->memc_or2 = 0xff000800; /* 16M */
+ break;
+
+ default:
+ return -1;
+ }
+
+ memctl->memc_br2 = 0x81 + base; /* use upma */
+
+ /* if no dimm is inserted, noMbytes is still detected as 8m, so
+ * sanity check top and bottom of memory */
- default:
- return -1;
+ *((uint *) BCSR1) &= ~BCSR1_DRAM_EN; /* enable dram */
+
+ /* check bytes / 2 because dram_size tests at base+bytes, which
+ * is not mapped */
+ if (dram_size ((long *) base, noMbytes << 19) != noMbytes << 19) {
+ *((uint *) BCSR1) |= BCSR1_DRAM_EN; /* disable dram */
+ return -1;
}
- memctl->memc_br2 = 0x81 + base; /* use upma */
return 0;
}
/* ------------------------------------------------------------------------- */
-void _dramdisable(void)
+static void _dramdisable(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -388,6 +421,9 @@ void _dramdisable(void)
/* maybe we should turn off upma here or something */
}
+#ifdef CONFIG_FADS
+/* SDRAM SUPPORT (FADS ONLY) */
+
#if defined(CONFIG_SDRAM_100MHZ)
/* ------------------------------------------------------------------------- */
@@ -398,49 +434,49 @@ void _dramdisable(void)
* work at all processor speeds.
*/
-#define SDRAM_MPTPRVALUE 0x0400
-
-#define SDRAM_MBMRVALUE0 0xc3802114 /* (16-14) 50 MHz */
+#ifdef SDRAM_ALT_INIT_SEQENCE
+# define SDRAM_MBMRVALUE0 0xc3802114 /* PTx=195,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=4 */
#define SDRAM_MBMRVALUE1 SDRAM_MBMRVALUE0
+# define SDRAM_MCRVALUE0 0x80808111 /* run upmb cs4 loop 1 addr 0x11 MRS */
+# define SDRAM_MCRVALUE1 SDRAM_MCRVALUE0 /* ??? why not 0x80808130? */
+#else
+# define SDRAM_MxMR_PTx 195
+# define UPM_MRS_ADDR 0x11
+# define UPM_REFRESH_ADDR 0x30 /* or 0x11 if we want to be like above? */
+#endif /* !SDRAM_ALT_INIT_SEQUENCE */
-#define SDRAM_OR4VALUE 0xffc00a00
-#define SDRAM_BR4VALUE 0x000000c1 /* base address will be or:ed on */
-
-#define SDRAM_MARVALUE 0x88
-
-#define SDRAM_MCRVALUE0 0x80808111 /* run pattern 0x11 */
-#define SDRAM_MCRVALUE1 SDRAM_MCRVALUE0
-
-
-const uint sdram_table[] =
+static const uint sdram_table[] =
{
/* single read. (offset 0 in upm RAM) */
0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x11adfc04,
- 0xefbbbc00, 0x1ff77c45, 0xffffffff, 0xffffffff,
+ 0xefbbbc00, 0x1ff77c45, _NOT_USED_, _NOT_USED_,
/* burst read. (offset 8 in upm RAM) */
0xefebfc24, 0x1f07fc24, 0xeeaefc04, 0x10adfc04,
0xf0affc00, 0xf0affc00, 0xf1affc00, 0xefbbbc00,
- 0x1ff77c45, 0xeffbbc04, 0x1ff77c34, 0xefeabc34,
- 0x1fb57c35, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x1ff77c45,
+
+ /* precharge + MRS. (offset 11 in upm RAM) */
+ 0xeffbbc04, 0x1ff77c34, 0xefeabc34,
+ 0x1fb57c35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* single write. (offset 18 in upm RAM) */
0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x01b93c04,
- 0x1ff77c45, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0x1ff77c45, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* burst write. (offset 20 in upm RAM) */
0xefebfc24, 0x1f07fc24, 0xeeaebc00, 0x10ad7c00,
0xf0affc00, 0xf0affc00, 0xe1bbbc04, 0x1ff77c45,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* refresh. (offset 30 in upm RAM) */
0xeffafc84, 0x1ff5fc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+ 0xfffffc84, 0xfffffc07, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* exception. (offset 3c in upm RAM) */
- 0xeffffc06, 0x1ffffc07, 0xffffffff, 0xffffffff };
+ 0xeffffc06, 0x1ffffc07, _NOT_USED_, _NOT_USED_ };
#elif defined(CONFIG_SDRAM_50MHZ)
@@ -449,71 +485,74 @@ const uint sdram_table[] =
/* for chip MB811171622A-100 */
/* this table is for 32-50MHz operation */
-
-#define _not_used_ 0xffffffff
-
-#define SDRAM_MPTPRVALUE 0x0400
-
-#define SDRAM_MBMRVALUE0 0x80802114 /* refresh at 32MHz */
-#define SDRAM_MBMRVALUE1 0x80802118
-
-#define SDRAM_OR4VALUE 0xffc00a00
-#define SDRAM_BR4VALUE 0x000000c1 /* base address will be or:ed on */
-
+#ifdef SDRAM_ALT_INIT_SEQENCE
+# define SDRAM_MBMRVALUE0 0x80802114 /* PTx=128,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=4 */
+# define SDRAM_MBMRVALUE1 0x80802118 /* PTx=128,PTxE,AMx=0,DSx=1,A11,RLFx=1,WLFx=1,TLFx=8 */
+# define SDRAM_MCRVALUE0 0x80808105 /* run upmb cs4 loop 1 addr 0x5 MRS */
+# define SDRAM_MCRVALUE1 0x80808130 /* run upmb cs4 loop 1 addr 0x30 REFRESH */
+# define SDRAM_MPTRVALUE 0x400
#define SDRAM_MARVALUE 0x88
+#else
+# define SDRAM_MxMR_PTx 128
+# define UPM_MRS_ADDR 0x5
+# define UPM_REFRESH_ADDR 0x30
+#endif /* !SDRAM_ALT_INIT_SEQUENCE */
-#define SDRAM_MCRVALUE0 0x80808105
-#define SDRAM_MCRVALUE1 0x80808130
-
-const uint sdram_table[] =
+static const uint sdram_table[] =
{
/* single read. (offset 0 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
0x1ff77c47,
- /* MRS initialization (offset 5) */
-
+ /* precharge + MRS. (offset 5 in upm RAM) */
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
/* burst read. (offset 8 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
- _not_used_, _not_used_, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* single write. (offset 18 in upm RAM) */
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
- _not_used_, _not_used_, _not_used_, _not_used_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* burst write. (offset 20 in upm RAM) */
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
- 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
+ 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* refresh. (offset 30 in upm RAM) */
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
- _not_used_, _not_used_, _not_used_, _not_used_,
+ 0xfffffc84, 0xfffffc07, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/* exception. (offset 3c in upm RAM) */
- 0x7ffffc07, _not_used_, _not_used_, _not_used_ };
+ 0x7ffffc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
/* ------------------------------------------------------------------------- */
#else
#error SDRAM not correctly configured
#endif
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+#define SDRAM_OR4VALUE 0x00000a00 /* SAM,GL5A/S=01,addr mask or'ed on later */
+#define SDRAM_BR4VALUE 0x000000c1 /* UPMB,base addr or'ed on later */
+
+/* ------------------------------------------------------------------------- */
+#ifdef SDRAM_ALT_INIT_SEQENCE
+/* ------------------------------------------------------------------------- */
-int _initsdram(uint base, uint noMbytes)
+static int _initsdram(uint base, uint noMbytes)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
- if(noMbytes != 4)
- {
- return -1;
- }
-
upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
memctl->memc_mptpr = SDRAM_MPTPRVALUE;
@@ -529,7 +568,7 @@ int _initsdram(uint base, uint noMbytes)
* UPM registers after we ask it to run these commands.
*/
- memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+ memctl->memc_mbmr = SDRAM_MBMRVALUE0; /* TLF 4 */
memctl->memc_mar = SDRAM_MARVALUE; /* MRS code */
udelay(200);
@@ -537,32 +576,120 @@ int _initsdram(uint base, uint noMbytes)
/* Now run the precharge/nop/mrs commands.
*/
- memctl->memc_mcr = 0x80808111; /* run pattern 0x11 */
-
+ memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
+ /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
udelay(200);
/* Run 8 refresh cycles */
- memctl->memc_mcr = SDRAM_MCRVALUE0;
+ memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
+ /* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
udelay(200);
- memctl->memc_mbmr = SDRAM_MBMRVALUE1;
- memctl->memc_mcr = SDRAM_MCRVALUE1;
+ memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
+ memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
+ /* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
udelay(200);
- memctl->memc_mbmr = SDRAM_MBMRVALUE0;
+ memctl->memc_mbmr = SDRAM_MBMRVALUE0; /* TLF 4 */
- memctl->memc_or4 = SDRAM_OR4VALUE;
+ memctl->memc_or4 = SDRAM_OR4VALUE | ~((noMbytes<<20)-1);
memctl->memc_br4 = SDRAM_BR4VALUE | base;
return 0;
}
/* ------------------------------------------------------------------------- */
+#else /* !SDRAM_ALT_INIT_SEQUENCE */
+/* ------------------------------------------------------------------------- */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+# define MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+# define MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+# define MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+# define MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MxMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+# define SDRAM_MxMR_8COL ((SDRAM_MxMR_PTx << MBMR_PTB_SHIFT) | MBMR_PTBE | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
+/* 9 column SDRAM */
+# define SDRAM_MxMR_9COL ((SDRAM_MxMR_PTx << MBMR_PTB_SHIFT) | MBMR_PTAE | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
+
+static int _initsdram(uint base, uint noMbytes)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ upmconfig(UPMB, (uint *)sdram_table,sizeof(sdram_table)/sizeof(uint));
+
+ memctl->memc_mptpr = MPTPR_2BK_4K;
+ memctl->memc_mbmr = SDRAM_MxMR_8COL & (~(MBMR_PTBE)); /* no refresh yet */
+
+ /* map CS 4 */
+ memctl->memc_or4 = SDRAM_OR4VALUE | ~((noMbytes<<20)-1);
+ memctl->memc_br4 = SDRAM_BR4VALUE | base;
+
+ /* Perform SDRAM initilization */
+# ifdef UPM_NOP_ADDR /* not currently in UPM table */
+ /* step 1: nop */
+ memctl->memc_mar = 0x00000000;
+ memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+ MCR_MLCF(0) | UPM_NOP_ADDR;
+# endif
+
+ /* step 2: delay */
+ udelay(200);
+
+# ifdef UPM_PRECHARGE_ADDR /* merged with MRS in UPM table */
+ /* step 3: precharge */
+ memctl->memc_mar = 0x00000000;
+ memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+ MCR_MLCF(4) | UPM_PRECHARGE_ADDR;
+# endif
+
+ /* step 4: refresh */
+ memctl->memc_mar = 0x00000000;
+ memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+ MCR_MLCF(2) | UPM_REFRESH_ADDR;
+
+ /*
+ * note: for some reason, the UPM values we are using include
+ * precharge with MRS
+ */
+
+ /* step 5: mrs */
+ memctl->memc_mar = 0x00000088;
+ memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+ MCR_MLCF(1) | UPM_MRS_ADDR;
+
+# ifdef UPM_NOP_ADDR
+ memctl->memc_mar = 0x00000000;
+ memctl->memc_mcr = MCR_UPM_B | MCR_OP_RUN | MCR_MB_CS4 |
+ MCR_MLCF(0) | UPM_NOP_ADDR;
+# endif
+ /*
+ * Enable refresh
+ */
+
+ memctl->memc_mbmr |= MBMR_PTBE;
+ return 0;
+}
+#endif /* !SDRAM_ALT_INIT_SEQUENCE */
+
+/* ------------------------------------------------------------------------- */
-void _sdramdisable(void)
+static void _sdramdisable(void)
{
volatile immap_t *immap = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
@@ -574,17 +701,16 @@ void _sdramdisable(void)
/* ------------------------------------------------------------------------- */
-int initsdram(uint base, uint *noMbytes)
+static int initsdram(uint base, uint *noMbytes)
{
- uint m = 4;
+ uint m = CFG_SDRAM_SIZE>>20;
+ /* _initsdram needs access to sdram */
*((uint *)BCSR1) |= BCSR1_SDRAM_EN; /* enable sdram */
- /* _fads_sdraminit needs access to sdram */
- *noMbytes = m;
if(!_initsdram(base, m))
{
-
+ *noMbytes += m;
return 0;
}
else
@@ -597,101 +723,85 @@ int initsdram(uint base, uint *noMbytes)
}
}
+/* SDRAM SUPPORT (FADS ONLY) */
+#endif /* CONFIG_FADS */
+
long int initdram (int board_type)
{
-#ifdef CONFIG_ADS
- /* ADS: has no SDRAM, so start DRAM at 0 */
- uint base = (unsigned long)0x0;
-#else
- /* FADS: has 4MB SDRAM, put DRAM above it */
- uint base = (unsigned long)0x00400000;
-#endif
- uint k, m, s;
+ uint sdramsz = 0; /* size of sdram in Mbytes */
+ uint base = 0; /* base of dram in bytes */
+ uint m = 0; /* size of dram in Mbytes */
+ uint k, s;
- k = (*((uint *)BCSR2) >> 23) & 0x0f;
+#ifdef CONFIG_FADS
+ if (!initsdram (0x00000000, &sdramsz)) {
+ base = sdramsz << 20;
+ printf ("(%u MB SDRAM) ", sdramsz);
+ }
+#endif
- m = 0;
+ k = (*((uint *) BCSR2) >> 23) & 0x0f;
- switch(k & 0x3)
- {
+ switch (k & 0x3) {
/* "MCM36100 / MT8D132X" */
- case 0x00 :
- m = 4;
- break;
+ case 0x00:
+ m = 4;
+ break;
/* "MCM36800 / MT16D832X" */
- case 0x01 :
- m = 32;
- break;
+ case 0x01:
+ m = 32;
+ break;
/* "MCM36400 / MT8D432X" */
- case 0x02 :
- m = 16;
- break;
+ case 0x02:
+ m = 16;
+ break;
/* "MCM36200 / MT16D832X ?" */
- case 0x03 :
- m = 8;
- break;
+ case 0x03:
+ m = 8;
+ break;
}
- switch(k >> 2)
- {
- case 0x02 :
- k = 70;
- break;
+ switch (k >> 2) {
+ case 0x02:
+ k = 70;
+ break;
- case 0x03 :
- k = 60;
- break;
+ case 0x03:
+ k = 60;
+ break;
- default :
- printf("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
- k = 70;
+ default:
+ printf ("unknown dramdelay (0x%x) - defaulting to 70 ns", k);
+ k = 70;
}
#ifdef CONFIG_FADS
/* the FADS is missing this bit, all rams treated as non-edo */
s = 0;
#else
- s = (*((uint *)BCSR2) >> 27) & 0x01;
+ s = (*((uint *) BCSR2) >> 27) & 0x01;
#endif
- if(!_draminit(base, m, s, k))
- {
-#ifdef CONFIG_FADS
- uint sdramsz;
-#endif
- *((uint *)BCSR1) &= ~BCSR1_DRAM_EN; /* enable dram */
-
-#ifdef CONFIG_FADS
- if (!initsdram(0x00000000, &sdramsz)) {
- m += sdramsz;
- printf("(%u MB SDRAM) ", sdramsz);
- } else {
- _dramdisable();
-
- /********************************
- *DRAM ERROR, HALT PROCESSOR
- *********************************/
- while(1);
-
- return -1;
- }
-#endif
-
- return (m << 20);
+ if (!_draminit (base, m, s, k)) {
+ printf ("%dM %dns %sDRAM: ", m, k, s ? "EDO " : "");
+ } else {
+ _dramdisable ();
+ m = 0;
}
- else
- {
- _dramdisable();
+ m += sdramsz; /* add sdram size to total */
+
+ if (!m) {
/********************************
*DRAM ERROR, HALT PROCESSOR
*********************************/
- while(1);
-
+ while (1);
return -1;
}
+
+ return (m << 20);
}
/* ------------------------------------------------------------------------- */
@@ -744,8 +854,7 @@ int pcmcia_init(void)
slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
- if (!(slota || slotb))
- {
+ if (!(slota || slotb)) {
printf("No card present\n");
#ifdef PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0;
@@ -766,61 +875,61 @@ int pcmcia_init(void)
** my FADS... :-)
*/
-#if defined(CONFIG_MPC860)
- switch( (pcmp->pcmc_pipr >> 30) & 3 )
+#if defined(CONFIG_MPC86x)
+ switch ((pcmp->pcmc_pipr >> 30) & 3)
#elif defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
- switch( (pcmp->pcmc_pipr >> 14) & 3 )
+ switch ((pcmp->pcmc_pipr >> 14) & 3)
#endif
{
- case 0x00 :
- printf("5V");
- v = 5;
- break;
- case 0x01 :
- printf("5V and 3V");
+ case 0x00 :
+ printf("5V");
+ v = 5;
+ break;
+ case 0x01 :
+ printf("5V and 3V");
#ifdef CONFIG_FADS
- v = 3; /* User lower voltage if supported! */
+ v = 3; /* User lower voltage if supported! */
#else
- v = 5;
+ v = 5;
#endif
- break;
- case 0x03 :
- printf("5V, 3V and x.xV");
+ break;
+ case 0x03 :
+ printf("5V, 3V and x.xV");
#ifdef CONFIG_FADS
- v = 3; /* User lower voltage if supported! */
+ v = 3; /* User lower voltage if supported! */
#else
- v = 5;
+ v = 5;
#endif
- break;
+ break;
}
- switch(v){
+ switch (v) {
#ifdef CONFIG_FADS
case 3:
- printf("; using 3V");
- /*
- ** Enable 3 volt Vcc.
- */
- *((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
- *((uint *)BCSR1) |= BCSR1_PCCVCC0;
- break;
+ printf("; using 3V");
+ /*
+ ** Enable 3 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCC1;
+ *((uint *)BCSR1) |= BCSR1_PCCVCC0;
+ break;
#endif
case 5:
- printf("; using 5V");
+ printf("; using 5V");
#ifdef CONFIG_ADS
- /*
- ** Enable 5 volt Vcc.
- */
- *((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
+ /*
+ ** Enable 5 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCCON;
#endif
#ifdef CONFIG_FADS
- /*
- ** Enable 5 volt Vcc.
- */
- *((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
- *((uint *)BCSR1) |= BCSR1_PCCVCC1;
+ /*
+ ** Enable 5 volt Vcc.
+ */
+ *((uint *)BCSR1) &= ~BCSR1_PCCVCC0;
+ *((uint *)BCSR1) |= BCSR1_PCCVCC1;
#endif
- break;
+ break;
default:
*((uint *)BCSR1) |= BCSR1_PCCEN; /* disable pcmcia */
@@ -833,9 +942,9 @@ int pcmcia_init(void)
udelay(20);
-#ifdef MPC860
+#ifdef PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0;
-#elif MPC823
+#elif PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0;
#endif
diff --git a/board/flagadm/flagadm.c b/board/flagadm/flagadm.c
index bfd15251e80..9c553676ec1 100644
--- a/board/flagadm/flagadm.c
+++ b/board/flagadm/flagadm.c
@@ -128,7 +128,7 @@ long int initdram (int board_type)
/* That should do it, just enable the periodic refresh in burst of 4*/
memctl->memc_mamr = CFG_MAMR_48_SDR | MAMR_TLFA_4X;
- memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_B4DIS);
+ memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS);
size_b0 = 16*1024*1024;
@@ -141,7 +141,7 @@ long int initdram (int board_type)
upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint));
- memctl->memc_mbmr = MAMR_GPL_B4DIS;
+ memctl->memc_mbmr = MBMR_GPL_B4DIS;
memctl->memc_or4 = CFG_OR4;
memctl->memc_br4 = CFG_BR4;
diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c
index a5e64b34c7d..3bfb25e9b8d 100644
--- a/board/genietv/genietv.c
+++ b/board/genietv/genietv.c
@@ -163,7 +163,7 @@ long int initdram (int board_type)
memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */
/* Execute refresh 8 times */
- memctl->memc_mbmr = (CFG_MBMR_8COL & ~MAMR_TLFB_MSK) | MAMR_TLFB_8X ;
+ memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X ;
memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */
diff --git a/board/gth/gth.c b/board/gth/gth.c
index 94e7a654336..6f972ce8908 100644
--- a/board/gth/gth.c
+++ b/board/gth/gth.c
@@ -218,7 +218,7 @@ int _initsdram (uint base, uint * noMbytes)
sizeof (fpga_table) / sizeof (uint));
/* Enable UPWAITB */
- mc->memc_mbmr = MAMR_GPL_B4DIS; /* (16-13) */
+ mc->memc_mbmr = MBMR_GPL_B4DIS; /* (16-13) */
/* CS2, base FPGA_2_BASE - 4 MByte, use UPM B 32 Bit */
mc->memc_or2 = 0xffc00000 | OR_BI;
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 73a3987ad66..131ab0201de 100644
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -246,14 +246,14 @@ initdram (int board_type)
udelay(1);
memctl->memc_mcr = 0x80806130; /* autorefresh */
- memctl->memc_mbmr |= MAMR_PTBE; /* refresh enabled */
+ memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
- memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+ memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
index 812f65acdfa..655c95182bd 100644
--- a/board/lantec/lantec.c
+++ b/board/lantec/lantec.c
@@ -149,7 +149,7 @@ long int initdram (int board_type)
udelay(1); /* 0x80006106 */
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06);
- memctl->memc_mamr |= MAMR_PTBE; /* refresh enabled */
+ memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
udelay(200);
@@ -170,7 +170,7 @@ long int initdram (int board_type)
(ulong *)SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
- memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+ memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
/*
* Final mapping:
diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c
index b869bf34608..869cd587235 100644
--- a/board/lwmon/lwmon.c
+++ b/board/lwmon/lwmon.c
@@ -246,7 +246,7 @@ long int initdram (int board_type)
udelay (1); /* 0x80006106 */
memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
- memctl->memc_mamr |= MAMR_PTBE; /* refresh enabled */
+ memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */
udelay (200);
@@ -276,11 +276,11 @@ long int initdram (int board_type)
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
- memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTBE;
+ memctl->memc_mamr = CFG_MAMR_9COL | MAMR_PTAE;
udelay (500);
} else { /* back to 8 columns */
size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTBE;
+ memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE;
udelay (500);
}
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 6d1764a2ac8..6df3d80ba73 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -198,11 +198,19 @@ void reset_phy (void)
vu_long *bcsr = (vu_long *)CFG_BCSR;
/* reset the FEC port */
- bcsr[1] &= ~FETH_RST;
+ bcsr[1] &= ~FETH1_RST;
udelay(2);
- bcsr[1] |= FETH_RST;
+ bcsr[1] |= FETH1_RST;
udelay(1000);
#ifdef CONFIG_MII
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+ /*
+ * Do not bypass Rx/Tx (de)scrambler (fix configuration error)
+ * Enable autonegotiation.
+ */
+ miiphy_write(0, 16, 0x610);
+ miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#else
/*
* Ethernet PHY is configured (by means of configuration pins)
* to work at 10Mb/s only. We reconfigure it using MII
@@ -212,6 +220,7 @@ void reset_phy (void)
miiphy_write(0, PHY_ANAR, 0x01E1); /* Advertise all capabilities */
miiphy_write(0, PHY_DCR, 0x0000); /* Do not bypass Rx/Tx (de)scrambler */
miiphy_write(0, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#endif /* CONFIG_MII */
}
@@ -219,7 +228,7 @@ int board_pre_init (void)
{
vu_long *bcsr = (vu_long *)CFG_BCSR;
- bcsr[1] = ~FETHIEN & ~RS232EN_1;
+ bcsr[1] = ~FETHIEN1 & ~RS232EN_1;
return 0;
}
@@ -231,12 +240,10 @@ long int initdram (int board_type)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
volatile uchar *ramaddr, c = 0xff;
-
- /* Initialisation is for 16MB DIMM the board is shipped with */
- long int msize = 16;
- uint or = 0xFF000CA0;
- uint psdmr = CFG_PSDMR;
- uint psrt = CFG_PSRT;
+ long int msize;
+ uint or;
+ uint psdmr;
+ uint psrt;
int i;
@@ -246,22 +253,29 @@ long int initdram (int board_type)
immap->im_siu_conf.sc_tescr1 = 0x00004000;
memctl->memc_mptpr = CFG_MPTPR;
- /* init local sdram, bank 4 */
- memctl->memc_lsrt = 0x00000010;
+#ifdef CFG_LSDRAM_BASE
+ /* Init local bus SDRAM */
+ memctl->memc_lsrt = CFG_LSRT;
+#if CONFIG_ADSTYPE == CFG_PQ2FADS /* CS3 */
+ memctl->memc_or3 = 0xFF803280;
+ memctl->memc_br3 = CFG_LSDRAM_BASE | 0x00001861;
+#else /* CS4 */
memctl->memc_or4 = 0xFFC01480;
- memctl->memc_br4 = 0x04001861;
- memctl->memc_lsdmr = 0x2886A522;
+ memctl->memc_br4 = CFG_LSDRAM_BASE | 0x00001861;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+ memctl->memc_lsdmr = CFG_LSDMR | 0x28000000;
ramaddr = (uchar *) CFG_LSDRAM_BASE;
*ramaddr = c;
- memctl->memc_lsdmr = 0x0886A522;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x08000000;
for (i = 0; i < 8; i++) {
*ramaddr = c;
}
- memctl->memc_lsdmr = 0x1886A522;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x18000000;
*ramaddr = c;
- memctl->memc_lsdmr = 0x4086A522;
+ memctl->memc_lsdmr = CFG_LSDMR | 0x40000000;
+#endif /* CFG_LSDRAM_BASE */
- /* init sdram dimm */
+ /* Init 60x bus SDRAM */
#ifdef CONFIG_SPD_EEPROM
{
spd_eeprom_t spd;
@@ -398,6 +412,16 @@ long int initdram (int board_type)
printf ("OR=%X, PSDMR=%08X, PSRT=%0X\n", or, psdmr, psrt);
#endif /* SPD_DEBUG */
}
+#else /* !CONFIG_SPD_EEPROM */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+ msize = 32;
+ or = 0xFE002EC0;
+#else
+ msize = 16;
+ or = 0xFF000CA0;
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+ psdmr = CFG_PSDMR;
+ psrt = CFG_PSRT;
#endif /* CONFIG_SPD_EEPROM */
memctl->memc_psrt = psrt;
memctl->memc_or2 = or;
@@ -415,12 +439,20 @@ long int initdram (int board_type)
*ramaddr = c;
#endif
- /* return total ram size of DIMM */
+ /* return total 60x bus SDRAM size */
return (msize * 1024 * 1024);
}
int checkboard (void)
{
+#if CONFIG_ADSTYPE == CFG_8260ADS
puts ("Board: Motorola MPC8260ADS\n");
+#elif CONFIG_ADSTYPE == CFG_8266ADS
+ puts ("Board: Motorola MPC8266ADS\n");
+#elif CONFIG_ADSTYPE == CFG_PQ2FADS
+ puts ("Board: Motorola PQ2FADS-ZU\n");
+#else
+ puts ("Board: unknown\n");
+#endif
return 0;
}
diff --git a/board/mvs1/u-boot.lds b/board/mvs1/u-boot.lds
index 7fe24df33fe..87bf341a9df 100644
--- a/board/mvs1/u-boot.lds
+++ b/board/mvs1/u-boot.lds
@@ -57,7 +57,6 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/mpc8xx/start.o (.text)
- cpu/mpc8xx/speed.o (.text)
common/dlmalloc.o (.text)
lib_ppc/ppcstring.o (.text)
lib_generic/vsprintf.o (.text)
@@ -67,7 +66,6 @@ SECTIONS
lib_generic/string.o (.text)
lib_ppc/extable.o (.text)
lib_ppc/kgdb.o (.text)
-/* lib_ppc/ticks.o (.text) */
. = env_offset;
common/environment.o(.text)
diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c
index 2a4ce0c32bd..b75e95a6044 100644
--- a/board/r360mpi/r360mpi.c
+++ b/board/r360mpi/r360mpi.c
@@ -205,7 +205,7 @@ long int initdram (int board_type)
memctl->memc_br3 = CFG_BR3_CAN;
/* Initialize MBMR */
- memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */
+ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;
diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c
index 079f38f7ec9..f2283b7601b 100644
--- a/board/siemens/CCM/ccm.c
+++ b/board/siemens/CCM/ccm.c
@@ -267,7 +267,7 @@ void can_driver_enable (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
/* Initialize MBMR */
- memctl->memc_mbmr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
+ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index b2111890dba..08dd9752277 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -217,9 +217,9 @@ initdram (int board_type)
#endif /* XXX */
reg = memctl->memc_mamr;
- reg &= ~MAMR_TLFB_MSK; /* switch timer loop ... */
- reg |= MAMR_TLFB_4X; /* ... to 4x */
- reg |= MAMR_PTBE; /* enable refresh */
+ reg &= ~MAMR_TLFA_MSK; /* switch timer loop ... */
+ reg |= MAMR_TLFA_4X; /* ... to 4x */
+ reg |= MAMR_PTAE; /* enable refresh */
memctl->memc_mamr = reg;
udelay(200);
@@ -246,7 +246,7 @@ initdram (int board_type)
size_b0 = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
#endif /* XXX */
- memctl->memc_mamr = CFG_MAMR | MAMR_PTBE;
+ memctl->memc_mamr = CFG_MAMR | MAMR_PTAE;
/*
* Final mapping:
diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c
index 61201d7ad0c..239cf263983 100644
--- a/board/spd8xx/spd8xx.c
+++ b/board/spd8xx/spd8xx.c
@@ -200,14 +200,14 @@ initdram (int board_type)
udelay(1);
memctl->memc_mcr = 0x80806106;
- memctl->memc_mbmr |= MAMR_PTBE; /* refresh enabled */
+ memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */
/*
* Check Bank 0 Memory Size for re-configuration
*/
size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
- memctl->memc_mbmr = CFG_MBMR_8COL | MAMR_PTBE;
+ memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
return (size_b0);
}
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 3b786ef8dfa..1ef879d5f12 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -140,7 +140,7 @@ long int initdram (int board_type)
memctl->memc_br3 = CFG_BR3_CAN;
/* Initialize MBMR */
- memctl->memc_mamr = MAMR_GPL_B4DIS; /* GPL_B4 ouput line Disable */
+ memctl->memc_mamr = MAMR_GPL_A4DIS; /* GPL_A4 ouput line Disable */
/* Initialize UPMB for CAN: single read */
memctl->memc_mdr = 0xFFFFC004;
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 3856f3d1015..6a9c77a67c8 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -507,6 +507,9 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char *argv[])
if(i2c_write(chip, addr, alen, (char *)&data, size) != 0) {
printf("Error writing the chip.\n");
}
+#ifdef CFG_EEPROM_PAGE_WRITE_DELAY_MS
+ udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
+#endif
if (incrflag)
addr += size;
}
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
index 4e232289c9e..b95e06f3459 100644
--- a/cpu/mpc8xx/cpu.c
+++ b/cpu/mpc8xx/cpu.c
@@ -42,12 +42,23 @@
static char *cpu_warning = "\n " \
"*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
-#if ((defined(CONFIG_MPC860) || defined(CONFIG_MPC855)) && \
+#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
!defined(CONFIG_MPC862))
-# ifdef CONFIG_MPC855
+
+# if defined(CONFIG_MPC855)
# define ID_STR "PC855"
+# elif defined(CONFIG_MPC852T)
+# define ID_STR "PC852T"
+# elif defined(CONFIG_MPC859T)
+# define ID_STR "PC859T"
+# elif defined(CONFIG_MPC859DSL)
+# define ID_STR "PC859DSL"
+# elif defined(CONFIG_MPC860P)
+# define ID_STR "PC860P"
+# elif defined(CONFIG_MPC866T)
+# define ID_STR "PC866T"
# else
-# define ID_STR "PC860"
+# define ID_STR "PC86x" /* unknown 86x chip */
# endif
static int check_CPU (long clock, uint pvr, uint immr)
@@ -68,6 +79,10 @@ static int check_CPU (long clock, uint pvr, uint immr)
m = 0;
switch (k) {
+#ifdef CONFIG_MPC866_et_al
+ /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
+ case 0x08000003: pre = 'M'; suf = ""; m = 1; break;
+#else
case 0x00020001: pre = 'p'; suf = ""; break;
case 0x00030001: suf = ""; break;
case 0x00120003: suf = "A"; break;
@@ -76,17 +91,16 @@ static int check_CPU (long clock, uint pvr, uint immr)
case 0x00200004: suf = "B"; break;
case 0x00300004: suf = "C"; break;
- case 0x00310004: suf = "C1"; m = 1;
- break;
+ case 0x00310004: suf = "C1"; m = 1; break;
case 0x00200064: mid = "SR"; suf = "B"; break;
case 0x00300065: mid = "SR"; suf = "C"; break;
case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
case 0x05010000: suf = "D3"; m = 1; break;
case 0x05020000: suf = "D4"; m = 1; break;
-
/* this value is not documented anywhere */
case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
+#endif
default: suf = NULL; break;
}
@@ -101,7 +115,7 @@ static int check_CPU (long clock, uint pvr, uint immr)
printf (" %u kB I-Cache", checkicache () >> 10);
printf (" %u kB D-Cache", checkdcache () >> 10);
- /* lets check and see if we're running on a 860T (or P?) */
+ /* do we have a FEC (860T/P or 852/859/866)? */
immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
@@ -114,6 +128,12 @@ static int check_CPU (long clock, uint pvr, uint immr)
putc ('\n');
+#ifdef DEBUG
+ if(clock != measure_gclk()) {
+ printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
+ }
+#endif
+
return 0;
}
@@ -316,7 +336,7 @@ int checkicache (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_ic_cst () & IDC_ENABLED;
-#ifdef CONFIG_IP860
+#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
@@ -363,7 +383,7 @@ int checkdcache (void)
volatile memctl8xx_t *memctl = &immap->im_memctl;
u32 cacheon = rd_dc_cst () & IDC_ENABLED;
-#ifdef CONFIG_IP860
+#ifdef CONFIG_IP86x
u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
#else
u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
@@ -462,8 +482,20 @@ unsigned long get_tbclk (void)
if (immr->im_clkrst.car_sccr & SCCR_TBS) {
return (gd->cpu_clk / 16);
}
-
- factor = (((CFG_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
+#define PLPRCR_val(a) (((CFG_PLPRCR) & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+#ifdef CONFIG_MPC866_et_al
+ /* MFN
+ MFI + -------
+ MFD + 1
+ factor = -----------------
+ (PDF + 1) * 2^S
+ */
+
+ factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
+ (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
+#else
+ factor = PLPRCR_val(MF)+1;
+#endif
oscclk = gd->cpu_clk / factor;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index 83ff66a48a3..80f763d1f08 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -145,6 +145,7 @@ void cpu_init_f (volatile immap_t * immr)
defined(CONFIG_RPXCLASSIC) || \
defined(CONFIG_RPXLITE) || \
defined(CONFIG_SPD823TS) || \
+ defined(CONFIG_MPC86xADS) || \
(defined(CONFIG_MPC860T) && defined(CONFIG_FADS))
memctl->memc_br0 = CFG_BR0_PRELIM;
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 85ba6b201d0..8ac78429283 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -217,7 +217,8 @@ static int fec_init(struct eth_device* dev, bd_t * bd)
volatile immap_t *immr = (immap_t *) CFG_IMMR;
volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-#if defined(CONFIG_FADS) && defined(CONFIG_MPC860T)
+#if defined(CONFIG_FADS) && \
+ ( defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al) )
/* configure FADS for fast (FEC) ethernet, half-duplex */
/* The LXT970 needs about 50ms to recover from reset, so
* wait for it by discovering the PHY before leaving eth_init().
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
index 866482600fc..8bc0a1afdea 100644
--- a/cpu/mpc8xx/interrupts.c
+++ b/cpu/mpc8xx/interrupts.c
@@ -334,7 +334,11 @@ void timer_interrupt (struct pt_regs *regs)
/* Reset Timer Expired and Timers Interrupt Status */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
__asm__ ("nop");
+#ifdef CONFIG_MPC866_et_al
+ immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
+#else
immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
+#endif
/* Restore Decrementer Count */
set_dec (decrementer_count);
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index d711a639894..e0fae5d5b47 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -192,9 +192,9 @@ static int scc_init(struct eth_device* dev, bd_t *bis)
volatile immap_t *immr = (immap_t *)CFG_IMMR;
-#if defined(CONFIG_FADS)
-#if defined(CONFIG_MPC860T)
- /* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
+#ifdef CONFIG_FADS
+#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
+ /* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
*((uint *) BCSR4) |= BCSR4_TFPLDL|BCSR4_TPSQEL;
*((uint *) BCSR1) &= ~BCSR1_ETHEN;
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 81c0279a013..5ca4d905533 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -68,6 +68,23 @@
#error "console not correctly defined"
#endif
+static void serial_setdivisor(volatile cpm8xx_t *cp)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ int divisor=gd->cpu_clk/16/gd->baudrate;
+
+ if(divisor/16>0x1000) {
+ /* bad divisor, assume 50Mhz clock and 9600 baud */
+ divisor=(50*1000*1000)/16/9600;
+ }
+
+ if(divisor<=0x1000) {
+ cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
+ } else {
+ cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
+ }
+}
+
#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
/*
@@ -229,8 +246,6 @@ int serial_init (void)
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
@@ -242,8 +257,7 @@ serial_setbrg (void)
cp->cp_simode = 0x00000000;
- cp->cp_brgc1 =
- (((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
+ serial_setdivisor(cp);
}
#ifdef CONFIG_MODEM_SUPPORT
@@ -506,8 +520,6 @@ int serial_init (void)
void
serial_setbrg (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *im = (immap_t *)CFG_IMMR;
volatile cpm8xx_t *cp = &(im->im_cpm);
@@ -518,10 +530,8 @@ serial_setbrg (void)
*/
cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
- /* no |= needed, since BRG1 is 000 */
- cp->cp_brgc1 =
- (((gd->cpu_clk / 16 / gd->baudrate)-1) << 1) | CPM_BRG_EN;
+ serial_setdivisor(cp);
}
void
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index e1c34001778..ae97d975536 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -32,7 +32,6 @@
#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
-#if !defined(CONFIG_8xx_GCLK_FREQ)
/* Access functions for the Machine State Register */
static __inline__ unsigned long get_msr(void)
{
@@ -46,7 +45,6 @@ static __inline__ void set_msr(unsigned long msr)
{
asm volatile("mtmsr %0" : : "r" (msr));
}
-#endif
/* ------------------------------------------------------------------------- */
@@ -83,16 +81,20 @@ static __inline__ void set_msr(unsigned long msr)
* CPU clock that is an even multiple of 0.1 MHz.
*/
-int get_clocks (void)
+unsigned long measure_gclk(void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
volatile immap_t *immr = (immap_t *) CFG_IMMR;
-#ifndef CONFIG_8xx_GCLK_FREQ
volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
ulong timer2_val;
ulong msr_val;
+#ifdef CONFIG_MPC866_et_al
+ /* dont use OSCM, only use EXTCLK/512 */
+ immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
+#else
+ immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
+#endif
+
/* Reset + Stop Timer 2, no cascading
*/
timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
@@ -158,10 +160,27 @@ int get_clocks (void)
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE;
- gd->cpu_clk = ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
+#ifdef CONFIG_MPC866_et_al
+ /* not using OSCM, using XIN, so scale appropriately */
+ return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
+#else
+ return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
+#endif
+}
+
+/*
+ * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
+ * or (if it is not defined) measure_gclk() (which uses the ref clock)
+ * from above.
+ */
+int get_clocks (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+#ifndef CONFIG_8xx_GCLK_FREQ
+ gd->cpu_clk = measure_gclk();
#else /* CONFIG_8xx_GCLK_FREQ */
-
/*
* If for some reason measuring the gclk frequency won't
* work, we return the hardwired value.
diff --git a/drivers/serial.c b/drivers/serial.c
index f28ad803c11..44875e5ae1f 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -51,6 +51,7 @@ static int calc_divisor (void)
console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
return (1); /* return 1 for base divisor */
}
+ console->osc_12m_sel = 0; /* clear if previsouly set */
#endif
return (CFG_NS16550_CLK / 16 / gd->baudrate);
}
diff --git a/include/common.h b/include/common.h
index c8ad856a505..03db8d7a40c 100644
--- a/include/common.h
+++ b/include/common.h
@@ -43,6 +43,20 @@ typedef volatile unsigned char vu_char;
#endif
#ifdef CONFIG_8xx
#include <asm/8xx_immap.h>
+#ifdef CONFIG_MPC860
+#define CONFIG_MPC86x 1
+#endif
+#ifdef CONFIG_MPC860T
+#define CONFIG_MPC86x 1
+#endif
+#if defined(CONFIG_MPC866P) || \
+ defined(CONFIG_MPC866T) || \
+ defined(CONFIG_MPC859T) || \
+ defined(CONFIG_MPC859DSL) || \
+ defined(CONFIG_MPC852T)
+#define CONFIG_MPC866_et_al 1
+#define CONFIG_MPC86x 1
+#endif
#elif defined(CONFIG_5xx)
#include <asm/5xx_immap.h>
#elif defined(CONFIG_8260)
diff --git a/include/commproc.h b/include/commproc.h
index 652d2ab9138..68452483513 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -707,10 +707,10 @@ typedef struct scc_enet {
/*** FADS860T********************************************************/
-#if defined(CONFIG_MPC860T) && defined(CONFIG_FADS)
-/* This ENET stuff is for the MPC860TFADS with ethernet on SCC1.
+#if (defined(CONFIG_MPC860T) || defined(CONFIG_MPC866_et_al)) \
+ && defined(CONFIG_FADS)
+/* This ENET stuff is for the MPC860TFADS/MPC8xxADS with ethernet on SCC1.
*/
-
#ifdef CONFIG_SCC1_ENET
#define SCC_ENET 0
#endif /* CONFIG_SCC1_ETHERNET */
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 1b7369236f0..00453035a85 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -19,6 +19,7 @@
#include <mpc8xx_irq.h>
#define CONFIG_MPC860 1
+#define CONFIG_MPC860T 1
#define CONFIG_ADS 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
@@ -31,10 +32,12 @@
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */
#define CFG_I2C_SLAVE 0x7F
-#define MPC8XX_XIN 32768 /* 32.768 kHz input frequency */
-#define MPC8XX_FACT 0x5F6 /* Multiply by 1526 */
+#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */
+#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
/* MPC8XX_FACT * MPC8XX_XIN = 50 MHz */
+#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 0
@@ -136,7 +139,7 @@
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
@@ -198,7 +201,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
-#define CFG_PLPRCR (((MPC8XX_FACT-1) << 20) | \
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index acb2eed2a8a..3b201a79108 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -23,6 +23,7 @@
#define CFG_PCMCIA_MEM_ADDR 0xe0000000
#define CFG_PCMCIA_MEM_SIZE 0x10000
#define CFG_IMMR 0xFF000000
+#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE 0x02800000
#define BCSR_ADDR ((uint) 0xff010000)
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index a1041769ef6..3d04ef0dd97 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -116,6 +116,7 @@
* Also NOTE that it doesn't mean SDRAM - it means MEMORY.
*/
#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE (4<<20) /* standard FADS has 4M */
#define CFG_FLASH_BASE 0x02800000
#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
#if 0
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index 2c9438988ed..fd56010c1ef 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -32,25 +32,33 @@
*/
#include <mpc8xx_irq.h>
-#define CONFIG_MPC860 1
-#define CONFIG_MPC860T 1
-#define CONFIG_FADS 1
+/* board type */
+#define CONFIG_FADS 1 /* old/new FADS + new ADS */
+
+/* processor type */
+#define CONFIG_MPC860T 1 /* 860T */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#undef CONFIG_8xx_CONS_SMC2
#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE 38400
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#if 0
-#define MPC8XX_FACT 10 /* Multiply by 10 */
-#define MPC8XX_XIN 5000000 /* 5 MHz in */
-#else
-#define MPC8XX_FACT 12 /* Multiply by 12 */
-#define MPC8XX_XIN 4000000 /* 4 MHz in */
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
+#if 0 /* old FADS */
+# define CFG_8XX_FACT 12 /* Multiply by 12 */
+# define CFG_8XX_XIN 4000000 /* 4 MHz in */
+#else /* new FADS */
+# define CFG_8XX_FACT 10 /* Multiply by 10 */
+# define CFG_8XX_XIN 5000000 /* 5 MHz in */
#endif
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
#if 1
@@ -59,8 +67,12 @@
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
-#define CONFIG_BOOTCOMMAND "bootm 2800100" /* autoboot command */
-#define CONFIG_BOOTARGS ""
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -77,10 +89,10 @@
/* choose SCC1 ethernet (10BASET on motherboard)
* or FEC ethernet (10/100 on daughterboard)
*/
-#if 1
+#if 0
#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
#undef CONFIG_FEC_ENET /* disable FEC ethernet */
-#else
+#else /* all 86x cores have FECs, if in doubt, use it */
#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
#define CFG_DISCOVER_PHY
@@ -107,7 +119,11 @@
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
+#else
#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#endif
#define CFG_LOAD_ADDR 0x00100000
@@ -120,7 +136,7 @@
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
-/*-----------------------------------------------------------------------
+/*----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CFG_IMMR 0xFF000000
@@ -141,6 +157,11 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
+#ifdef CONFIG_FADS
+# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
+#else /* !CONFIG_FADS */ /* old ADS */
+# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
+#endif
#define CFG_FLASH_BASE 0x02800000
@@ -218,7 +239,7 @@
*-----------------------------------------------------------------------
* set the PLL, the low-power modes and the reset control (15-29)
*/
-#define CFG_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
/*-----------------------------------------------------------------------
@@ -235,7 +256,7 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_DER 0
+#define CFG_DER 0
/* Because of the way the 860 starts up and assigns CS0 the
* entire address space, we have to set the memory controller
@@ -280,36 +301,6 @@
#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
-#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
-#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
-#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-
-#define CFG_MAMR 0x13a01114
/*
* Internal Definitions
*
@@ -425,7 +416,7 @@
#endif /* CONFIG_MPC850 */
#define CONFIG_DRAM_50MHZ 1
-#define CONFIG_SDRAM_50MHZ
+#define CONFIG_SDRAM_50MHZ 1
#ifdef CONFIG_MPC860T
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
index 7b762266a89..6dedbd77706 100644
--- a/include/configs/IAD210.h
+++ b/include/configs/IAD210.h
@@ -354,7 +354,7 @@
*/
#define CFG_MAMR ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLB_A11 | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X)
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index 77746e87f47..a0cb1dd484b 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -424,7 +424,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -448,19 +448,19 @@
#if defined (CONFIG_IVML24_16M)
/* 8 column SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_32M)
/* 128 MBit SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVML24_64M)
/* 128 MBit SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif
/*
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index 19063fa4dca..46b4d535462 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -408,7 +408,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -431,19 +431,19 @@
#if defined (CONFIG_IVMS8_16M)
/* 8 column SDRAM */
-# define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+# define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_32M)
/* 128 MBit SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#elif defined (CONFIG_IVMS8_64M)
/* 128 MBit SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_1 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_1 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A10 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
#endif
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 401591db947..5960b302528 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -9,7 +9,8 @@
*
* (C) Copyright 2003 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII.
+ * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
+ * Ported to PQ2FADS-ZU board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -41,6 +42,15 @@
#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */
+/* ADS flavours */
+#define CFG_8260ADS 1 /* MPC8260ADS */
+#define CFG_8266ADS 2 /* MPC8266ADS */
+#define CFG_PQ2FADS 3 /* PQ2FADS-ZU */
+
+#ifndef CONFIG_ADSTYPE
+#define CONFIG_ADSTYPE CFG_8260ADS
+#endif /* CONFIG_ADSTYPE */
+
#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
/* allow serial and ethaddr to be overwritten */
@@ -116,7 +126,9 @@
#endif /* CONFIG_ETHER_ON_FCC */
-/* other options */
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
+#else
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
@@ -124,18 +136,23 @@
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
#define CONFIG_SPD_ADDR 0x50
#endif
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 1 /* By default, use page-based interleaving */
#endif
#ifndef CONFIG_8260_CLKIN
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_8260_CLKIN 100000000 /* in Hz */
+#else
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#endif
+#endif
+
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
- CFG_CMD_BEDBUG | \
+#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_BSP | \
CFG_CMD_DATE | \
@@ -143,11 +160,11 @@
CFG_CMD_DTT | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
CFG_CMD_HWFLOW | \
CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
CFG_CMD_KGDB | \
CFG_CMD_MMC | \
CFG_CMD_NAND | \
@@ -155,8 +172,18 @@
CFG_CMD_PCMCIA | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_USB ) )
+ CFG_CMD_USB | \
+ CFG_CMD_VFD
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_I2C | \
+ CFG_EXCLUDE ) )
+#else
+#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
+ CFG_EXCLUDE ) )
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -200,7 +227,6 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CFG_FLASH_BASE 0xff800000
-#define FLASH_BASE 0xff800000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */
#define CFG_FLASH_SIZE 8
@@ -219,14 +245,16 @@
#define CFG_DEFAULT_IMMR 0x0F010000
#define CFG_IMMR 0xF0000000
-#define CFG_BCSR 0x04500000
+#define CFG_BCSR 0xF4500000
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_LSDRAM_BASE 0x04000000
+#define CFG_LSDRAM_BASE 0xD0000000
#define RS232EN_1 0x02000002
#define RS232EN_2 0x01000001
-#define FETHIEN 0x08000008
-#define FETH_RST 0x04000004
+#define FETHIEN1 0x08000008
+#define FETH1_RST 0x04000004
+#define FETHIEN2 0x01000000
+#define FETH2_RST 0x08000000
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
@@ -288,19 +316,30 @@
#define CFG_SYPCR 0xFFFFFFC3
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
-#define CFG_SCCR 0x00000000
-#define CFG_BR0_PRELIM 0xFF801801
-#define CFG_OR0_PRELIM 0xFF800836
-#define CFG_BR1_PRELIM 0x04501801
+#define CFG_SCCR SCCR_DFBRG01
+#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
+#define CFG_OR0_PRELIM 0xFF800876
+#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
#define CFG_OR1_PRELIM 0xFFFF8010
-#define CFG_RMR 0
+#define CFG_RMR RMR_CSRE
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CFG_RCCR 0
+
+#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#define CFG_PSDMR 0x824B36A3
+#define CFG_PSRT 0x13
+#define CFG_LSDMR 0x828737A3
+#define CFG_LSRT 0x13
+#define CFG_MPTPR 0x2800
+#else
#define CFG_PSDMR 0x016EB452
-#define CFG_MPTPR 0x00001900
-#define CFG_PSRT 0x00000021
+#define CFG_PSRT 0x21
+#define CFG_LSDMR 0x0086A522
+#define CFG_LSRT 0x21
+#define CFG_MPTPR 0x1900
+#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
#define CFG_RESET_ADDRESS 0x04400000
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
new file mode 100644
index 00000000000..fc79c52d79b
--- /dev/null
+++ b/include/configs/MPC86xADS.h
@@ -0,0 +1,438 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Motorola MPC8xxADS board. Copied from the FADS config.
+ *
+ * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+ */
+
+/*
+ * 1999-nov-26: The FADS is using the following physical memorymap:
+ *
+ * ff020000 -> ff02ffff : pcmcia
+ * ff010000 -> ff01ffff : BCSR connected to CS1, setup by 8xxrom
+ * ff000000 -> ff00ffff : IMAP internal in the cpu
+ * fe000000 -> ffnnnnnn : flash connected to CS0, setup by 8xxrom
+ * 00000000 -> nnnnnnnn : sdram/dram setup by 8xxrom
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#include <mpc8xx_irq.h>
+
+/* board type */
+#define CONFIG_MPC86xADS 1 /* new ADS */
+#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
+
+/* new 86xADS only - pick one of these */
+#define CONFIG_MPC866T 1
+#undef CONFIG_MPC866P
+#undef CONFIG_MPC859T
+#undef CONFIG_MPC859DSL
+#undef CONFIG_MPC852T
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+
+#ifdef CONFIG_MPC86xADS
+# define CFG_8XX_FACT 5 /* Multiply by 5 */
+# define CFG_8XX_XIN 10000000 /* 10 MHz in */
+#else /* ! CONFIG_MPC86xADS */
+# if 0 /* old FADS */
+# define CFG_8XX_FACT 12 /* Multiply by 12 */
+# define CFG_8XX_XIN 4000000 /* 4 MHz in */
+# else /* new FADS */
+# define CFG_8XX_FACT 10 /* Multiply by 10 */
+# define CFG_8XX_XIN 5000000 /* 5 MHz in */
+# endif
+#endif /* ! CONFIG_MPC86xADS */
+
+#define MPC8XX_HZ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
+
+/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
+/* in general, we always know this for FADS+new ADS anyway */
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+
+/* most vanilla kernels do not like this, set to 0 if in doubt */
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#if 1
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+ "bootp; " \
+ "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off; " \
+ "bootm"
+
+/* #include "local.h" */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/* ATA / IDE and partition support */
+#define CONFIG_MAC_PARTITION 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_ISO_PARTITION 1
+#undef CONFIG_ATAPI
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+/* choose SCC1 ethernet (10BASET on motherboard)
+ * or FEC ethernet (10/100 on daughterboard)
+ */
+#if 0
+#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */
+#undef CONFIG_FEC_ENET /* disable FEC ethernet */
+#else /* all 86x cores have FECs, if in doubt, use it */
+#undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */
+#define CONFIG_FEC_ENET 1 /* use FEC ethernet */
+#define CFG_DISCOVER_PHY
+#endif
+#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
+#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#undef CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=>" /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0100000 /* memtest works on */
+#if (CFG_SDRAM_SIZE)
+#define CFG_MEMTEST_END CFG_SDRAM_SIZE /* 1 ... SDRAM_SIZE */
+#else
+#define CFG_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */
+#endif
+
+#define CFG_LOAD_ADDR 0x00100000
+
+#define CFG_HZ 1000 /* decr freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFF000000
+#define CFG_IMMR_SIZE ((uint)(64 * 1024))
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#ifdef CONFIG_FADS
+# ifdef CONFIG_MPC86xADS /* new ADS */
+# define CFG_SDRAM_SIZE 0x00800000 /* 8 meg */
+# else /* old/new FADS */
+# define CFG_SDRAM_SIZE 0x00400000 /* 4 meg */
+# endif
+#else /* !CONFIG_FADS */ /* old ADS */
+# define CFG_SDRAM_SIZE 0x00000000 /* NO SDRAM */
+#endif
+
+#define CFG_FLASH_BASE 0x02800000
+
+#define CFG_FLASH_SIZE ((uint)(8 * 1024 * 1024)) /* max 8Mbyte */
+
+#define CFG_MONITOR_LEN (272 << 10) /* Reserve 272 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 16 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00040000
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sector total size */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control (15-29)
+ */
+#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | \
+ PLPRCR_SPLSS | PLPRCR_TEXPS)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
+
+ /*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/* Because of the way the 860 starts up and assigns CS0 the
+* entire address space, we have to set the memory controller
+* differently. Normally, you write the option register
+* first, and then enable the chip select by writing the
+* base register. For CS0, you must write the base register
+* first, followed by the option register.
+*/
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+/* the other CS:s are determined by looking at parameters in BCSRx */
+
+#define BCSR_ADDR ((uint) 0xFF010000)
+#define BCSR_SIZE ((uint)(64 * 1024))
+
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
+
+/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */
+#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_3_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+
+#ifdef USE_REAL_FLASH_VALUES
+/*
+ * The "default" behaviour with 1Mbyte initial doesn't work for us!
+ */
+#define CFG_OR0_PRELIM 0x0FFC00D34 /* Real values for the board */
+#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
+#else
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) /* 8 Mbyte until detected */
+#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA_MSK) | BR_V )
+#endif
+
+/* BCSRx - Board Control and Status Registers */
+#define CFG_OR1_REMAP CFG_OR0_REMAP
+#define CFG_OR1_PRELIM 0xffff8110 /* 64Kbyte address space */
+#define CFG_BR1_PRELIM ((BCSR_ADDR) | BR_V )
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+/* values according to the manual */
+
+#define PCMCIA_MEM_ADDR ((uint)0xff020000)
+#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
+
+#define BCSR0 ((uint) (BCSR_ADDR + 00))
+#define BCSR1 ((uint) (BCSR_ADDR + 0x04))
+#define BCSR2 ((uint) (BCSR_ADDR + 0x08))
+#define BCSR3 ((uint) (BCSR_ADDR + 0x0c))
+#define BCSR4 ((uint) (BCSR_ADDR + 0x10))
+
+/* FADS bitvalues by Helmut Buchsbaum
+ * see MPC8xxADS User's Manual for a proper description
+ * of the following structures
+ */
+
+#define BCSR0_ERB ((uint)0x80000000)
+#define BCSR0_IP ((uint)0x40000000)
+#define BCSR0_BDIS ((uint)0x10000000)
+#define BCSR0_BPS_MASK ((uint)0x0C000000)
+#define BCSR0_ISB_MASK ((uint)0x01800000)
+#define BCSR0_DBGC_MASK ((uint)0x00600000)
+#define BCSR0_DBPC_MASK ((uint)0x00180000)
+#define BCSR0_EBDF_MASK ((uint)0x00060000)
+
+#define BCSR1_FLASH_EN ((uint)0x80000000)
+#define BCSR1_DRAM_EN ((uint)0x40000000)
+#define BCSR1_ETHEN ((uint)0x20000000)
+#define BCSR1_IRDEN ((uint)0x10000000)
+#define BCSR1_FLASH_CFG_EN ((uint)0x08000000)
+#define BCSR1_CNT_REG_EN_PROTECT ((uint)0x04000000)
+#define BCSR1_BCSR_EN ((uint)0x02000000)
+#define BCSR1_RS232EN_1 ((uint)0x01000000)
+#define BCSR1_PCCEN ((uint)0x00800000)
+#define BCSR1_PCCVCC0 ((uint)0x00400000)
+#define BCSR1_PCCVPP_MASK ((uint)0x00300000)
+#define BCSR1_DRAM_HALF_WORD ((uint)0x00080000)
+#define BCSR1_RS232EN_2 ((uint)0x00040000)
+#define BCSR1_SDRAM_EN ((uint)0x00020000)
+#define BCSR1_PCCVCC1 ((uint)0x00010000)
+
+#define BCSR2_FLASH_PD_MASK ((uint)0xF0000000)
+#define BCSR2_DRAM_PD_MASK ((uint)0x07800000)
+#define BCSR2_DRAM_PD_SHIFT (23)
+#define BCSR2_EXTTOLI_MASK ((uint)0x00780000)
+#define BCSR2_DBREVNR_MASK ((uint)0x00030000)
+
+#define BCSR3_DBID_MASK ((ushort)0x3800)
+#define BCSR3_CNT_REG_EN_PROTECT ((ushort)0x0400)
+#define BCSR3_BREVNR0 ((ushort)0x0080)
+#define BCSR3_FLASH_PD_MASK ((ushort)0x0070)
+#define BCSR3_BREVN1 ((ushort)0x0008)
+#define BCSR3_BREVN2_MASK ((ushort)0x0003)
+
+#define BCSR4_ETHLOOP ((uint)0x80000000)
+#define BCSR4_TFPLDL ((uint)0x40000000)
+#define BCSR4_TPSQEL ((uint)0x20000000)
+#define BCSR4_SIGNAL_LAMP ((uint)0x10000000)
+#define BCSR4_FETH_EN ((uint)0x08000000)
+#define BCSR4_FETHCFG0 ((uint)0x04000000)
+#define BCSR4_FETHFDE ((uint)0x02000000)
+#define BCSR4_FETHCFG1 ((uint)0x00400000)
+#define BCSR4_FETHRST ((uint)0x00200000)
+
+#define CONFIG_DRAM_50MHZ 1
+#define CONFIG_SDRAM_50MHZ 1
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
+
+/* We don't use the 8259.
+*/
+#define NR_8259_INTS 0
+
+/* Machine type
+*/
+#define _MACH_8xx (_MACH_fads)
+
+#define CONFIG_DISK_SPINUP_TIME 1000000
+
+
+/* PCMCIA configuration */
+
+#define PCMCIA_MAX_SLOTS 2
+
+#ifdef CONFIG_MPC860
+#define PCMCIA_SLOT_A 1
+#endif
+/*#define CFG_PCMCIA_MEM_SIZE ( 64 << 20) */
+#define CFG_PCMCIA_MEM_ADDR (0x50000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0x54000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0x58000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0x5C000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+/* we have 8 windows, we take everything up to 60000000 */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0000
+/*#define CFG_ATA_ALT_OFFSET 0x0100 */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index 959ee1a4910..9746b64b0b2 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -331,8 +331,7 @@
*
*/
/* #define CFG_DER 0x2002000F */
-/* #define CFG_DER 0 */
-#define CFG_DER 0x0082000F
+#define CFG_DER 0
/*
* Init Memory Controller:
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index 51f2c253c21..ae4dcc2ccca 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -381,7 +381,7 @@
*/
/* periodic timer for refresh */
-#define CFG_MAMR_PTB 204
+#define CFG_MBMR_PTB 204
/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
@@ -396,9 +396,9 @@
*/
/* 8 column SDRAM */
-#define CFG_MBMR_8COL ((CFG_MAMR_PTB << MAMR_PTB_SHIFT) | \
- MAMR_AMB_TYPE_0 | MAMR_DSB_1_CYCL | MAMR_G0CLB_A11 | \
- MAMR_RLFB_1X | MAMR_WLFB_1X | MAMR_TLFB_4X)
+#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+ MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \
+ MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X)
/*
* Internal Definitions
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 42877a70f83..31f1e56b00d 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -518,11 +518,11 @@
#define CFG_MAMR_PTA 0x30 /* = 48 */
#define CFG_MAMR ( (CFG_MAMR_PTA << MAMR_PTA_SHIFT) | \
- MAMR_AMB_TYPE_1 | \
- MAMR_G0CLB_A10 | \
- MAMR_RLFB_1X | \
- MAMR_WLFB_1X | \
- MAMR_TLFB_8X )
+ MAMR_AMA_TYPE_1 | \
+ MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | \
+ MAMR_WLFA_1X | \
+ MAMR_TLFA_8X )
/*
* Internal Definitions
diff --git a/include/configs/v37.h b/include/configs/v37.h
index 6696985bf5c..45bc353ad2a 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -296,8 +296,7 @@
*-----------------------------------------------------------------------
*
*/
-#define CFG_DER 0x0082000F
-/*#define CFG_DER 0*/
+#define CFG_DER 0
/*
* Init Memory Controller:
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 1a65f10ca29..e74d146fb99 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -121,8 +121,8 @@
* RSR - Reset Status Register 5-4
*/
#define RSR_JTRS 0x01000000 /* JTAG Reset Status */
-#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
-#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
+#define RSR_DBSRS 0x02000000 /* Debug Port Soft Reset Status */
+#define RSR_DBHRS 0x04000000 /* Debug Port Hard Reset Status */
#define RSR_CSRS 0x08000000 /* Check Stop Reset Status */
#define RSR_SWRS 0x10000000 /* Software Watchdog Reset Status*/
#define RSR_LLRS 0x20000000 /* Loss-of-Lock Reset Status */
@@ -134,21 +134,42 @@
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*/
-#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_MF_MSK 0xffff0000 /* Multiplication factor bits */
+#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */
+#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/
+#define PLPRCR_MFD_MSK 0x03c00000 /* Multiplication factor denominator bits */
+#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/
+#define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */
+#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift*/
+#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */
+#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift*/
+#else
+#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */
#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
+#endif
#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
+#ifndef CONFIG_MPC866_et_al
#define PLPRCR_TMIST 0x00001000 /* Timers Interrupt Status */
+#endif
#define PLPRCR_CSRC 0x00000400 /* Clock Source */
+#ifndef CONFIG_MPC866_et_al
#define PLPRCR_LPM_MSK 0x00000300 /* Low Power Mode mask */
#define PLPRCR_LPM_NORMAL 0x00000000 /* normal power management mode */
#define PLPRCR_LPM_DOZE 0x00000100 /* doze power management mode */
#define PLPRCR_LPM_SLEEP 0x00000200 /* sleep power management mode */
#define PLPRCR_LPM_DEEP_SLEEP 0x00000300 /* deep sleep power mgt mode */
#define PLPRCR_LPM_DOWN 0x00000300 /* down power management mode */
+#endif
#define PLPRCR_CSR 0x00000080 /* CheskStop Reset value */
#define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */
#define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */
+#ifdef CONFIG_MPC866_et_al
+#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */
+#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */
+#define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */
+#endif
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
@@ -261,8 +282,8 @@
* MCR - Memory Command Register
*/
#define MCR_OP_WRITE 0x00000000 /* WRITE command */
-#define MCR_OP_READ 0x40000000 /* READ command */
-#define MCR_OP_RUN 0x80000000 /* RUN command */
+#define MCR_OP_READ 0x40000000 /* READ command */
+#define MCR_OP_RUN 0x80000000 /* RUN command */
#define MCR_UPM_A 0x00000000 /* Select UPM A */
#define MCR_UPM_B 0x00800000 /* Select UPM B */
#define MCR_MB_CS0 0x00000000 /* Use Chip Select /CS0 */
@@ -359,138 +380,138 @@
/*-----------------------------------------------------------------------
* Machine B Mode Register 16-13
*/
-#define MAMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
-#define MAMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
-#define MAMR_PTBE 0x00800000 /* Periodic Timer B Enable */
-#define MAMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
-#define MAMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
-#define MAMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
-#define MAMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
-#define MAMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
-#define MAMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
-#define MAMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
-#define MAMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
-#define MAMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
-#define MAMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
-#define MAMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
-#define MAMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
-#define MAMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
-#define MAMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
-#define MAMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
-#define MAMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
-#define MAMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
-#define MAMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
-#define MAMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
-#define MAMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
-#define MAMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
-#define MAMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
-#define MAMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
-#define MAMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
-#define MAMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
-#define MAMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
-#define MAMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
-#define MAMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
-#define MAMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
-#define MAMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
-#define MAMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
-#define MAMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
-#define MAMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
-#define MAMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
-#define MAMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
-#define MAMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
-#define MAMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
-#define MAMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
-#define MAMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
-#define MAMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
-#define MAMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
-#define MAMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
-#define MAMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
-#define MAMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
-#define MAMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
-#define MAMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
-#define MAMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
-#define MAMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
-#define MAMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
-#define MAMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
-#define MAMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
-#define MAMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
-#define MAMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
-#define MAMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
-#define MAMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
-#define MAMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
-#define MAMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
-#define MAMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
-#define MAMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
-#define MAMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
-#define MAMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
-#define MAMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
-#define MAMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
-#define MAMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
-#define MAMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
-#define MAMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
-#define MAMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
-#define MAMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
-#define MAMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
-#define MAMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
-#define MAMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
-#define MAMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
-#define MAMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
+#define MBMR_PTB_MSK 0xFF000000 /* Periodic Timer B period mask */
+#define MBMR_PTB_SHIFT 0x00000018 /* Periodic Timer B period shift */
+#define MBMR_PTBE 0x00800000 /* Periodic Timer B Enable */
+#define MBMR_AMB_MSK 0x00700000 /* Addess Multiplex size B */
+#define MBMR_AMB_TYPE_0 0x00000000 /* Addess Multiplexing Type 0 */
+#define MBMR_AMB_TYPE_1 0x00100000 /* Addess Multiplexing Type 1 */
+#define MBMR_AMB_TYPE_2 0x00200000 /* Addess Multiplexing Type 2 */
+#define MBMR_AMB_TYPE_3 0x00300000 /* Addess Multiplexing Type 3 */
+#define MBMR_AMB_TYPE_4 0x00400000 /* Addess Multiplexing Type 4 */
+#define MBMR_AMB_TYPE_5 0x00500000 /* Addess Multiplexing Type 5 */
+#define MBMR_DSB_MSK 0x00060000 /* Disable Timer period mask */
+#define MBMR_DSB_1_CYCL 0x00000000 /* 1 cycle Disable Period */
+#define MBMR_DSB_2_CYCL 0x00020000 /* 2 cycle Disable Period */
+#define MBMR_DSB_3_CYCL 0x00040000 /* 3 cycle Disable Period */
+#define MBMR_DSB_4_CYCL 0x00060000 /* 4 cycle Disable Period */
+#define MBMR_G0CLB_MSK 0x0000E000 /* General Line 0 Control B */
+#define MBMR_G0CLB_A12 0x00000000 /* General Line 0 : A12 */
+#define MBMR_G0CLB_A11 0x00002000 /* General Line 0 : A11 */
+#define MBMR_G0CLB_A10 0x00004000 /* General Line 0 : A10 */
+#define MBMR_G0CLB_A9 0x00006000 /* General Line 0 : A9 */
+#define MBMR_G0CLB_A8 0x00008000 /* General Line 0 : A8 */
+#define MBMR_G0CLB_A7 0x0000A000 /* General Line 0 : A7 */
+#define MBMR_G0CLB_A6 0x0000C000 /* General Line 0 : A6 */
+#define MBMR_G0CLB_A5 0x0000E000 /* General Line 0 : A5 */
+#define MBMR_GPL_B4DIS 0x00001000 /* GPL_B4 ouput line Disable */
+#define MBMR_RLFB_MSK 0x00000F00 /* Read Loop Field B mask */
+#define MBMR_RLFB_1X 0x00000100 /* The Read Loop is executed 1 time */
+#define MBMR_RLFB_2X 0x00000200 /* The Read Loop is executed 2 times */
+#define MBMR_RLFB_3X 0x00000300 /* The Read Loop is executed 3 times */
+#define MBMR_RLFB_4X 0x00000400 /* The Read Loop is executed 4 times */
+#define MBMR_RLFB_5X 0x00000500 /* The Read Loop is executed 5 times */
+#define MBMR_RLFB_6X 0x00000600 /* The Read Loop is executed 6 times */
+#define MBMR_RLFB_7X 0x00000700 /* The Read Loop is executed 7 times */
+#define MBMR_RLFB_8X 0x00000800 /* The Read Loop is executed 8 times */
+#define MBMR_RLFB_9X 0x00000900 /* The Read Loop is executed 9 times */
+#define MBMR_RLFB_10X 0x00000A00 /* The Read Loop is executed 10 times */
+#define MBMR_RLFB_11X 0x00000B00 /* The Read Loop is executed 11 times */
+#define MBMR_RLFB_12X 0x00000C00 /* The Read Loop is executed 12 times */
+#define MBMR_RLFB_13X 0x00000D00 /* The Read Loop is executed 13 times */
+#define MBMR_RLFB_14X 0x00000E00 /* The Read Loop is executed 14 times */
+#define MBMR_RLFB_15X 0x00000f00 /* The Read Loop is executed 15 times */
+#define MBMR_RLFB_16X 0x00000000 /* The Read Loop is executed 16 times */
+#define MBMR_WLFB_MSK 0x000000F0 /* Write Loop Field B mask */
+#define MBMR_WLFB_1X 0x00000010 /* The Write Loop is executed 1 time */
+#define MBMR_WLFB_2X 0x00000020 /* The Write Loop is executed 2 times */
+#define MBMR_WLFB_3X 0x00000030 /* The Write Loop is executed 3 times */
+#define MBMR_WLFB_4X 0x00000040 /* The Write Loop is executed 4 times */
+#define MBMR_WLFB_5X 0x00000050 /* The Write Loop is executed 5 times */
+#define MBMR_WLFB_6X 0x00000060 /* The Write Loop is executed 6 times */
+#define MBMR_WLFB_7X 0x00000070 /* The Write Loop is executed 7 times */
+#define MBMR_WLFB_8X 0x00000080 /* The Write Loop is executed 8 times */
+#define MBMR_WLFB_9X 0x00000090 /* The Write Loop is executed 9 times */
+#define MBMR_WLFB_10X 0x000000A0 /* The Write Loop is executed 10 times */
+#define MBMR_WLFB_11X 0x000000B0 /* The Write Loop is executed 11 times */
+#define MBMR_WLFB_12X 0x000000C0 /* The Write Loop is executed 12 times */
+#define MBMR_WLFB_13X 0x000000D0 /* The Write Loop is executed 13 times */
+#define MBMR_WLFB_14X 0x000000E0 /* The Write Loop is executed 14 times */
+#define MBMR_WLFB_15X 0x000000F0 /* The Write Loop is executed 15 times */
+#define MBMR_WLFB_16X 0x00000000 /* The Write Loop is executed 16 times */
+#define MBMR_TLFB_MSK 0x0000000F /* Timer Loop Field B mask */
+#define MBMR_TLFB_1X 0x00000001 /* The Timer Loop is executed 1 time */
+#define MBMR_TLFB_2X 0x00000002 /* The Timer Loop is executed 2 times */
+#define MBMR_TLFB_3X 0x00000003 /* The Timer Loop is executed 3 times */
+#define MBMR_TLFB_4X 0x00000004 /* The Timer Loop is executed 4 times */
+#define MBMR_TLFB_5X 0x00000005 /* The Timer Loop is executed 5 times */
+#define MBMR_TLFB_6X 0x00000006 /* The Timer Loop is executed 6 times */
+#define MBMR_TLFB_7X 0x00000007 /* The Timer Loop is executed 7 times */
+#define MBMR_TLFB_8X 0x00000008 /* The Timer Loop is executed 8 times */
+#define MBMR_TLFB_9X 0x00000009 /* The Timer Loop is executed 9 times */
+#define MBMR_TLFB_10X 0x0000000A /* The Timer Loop is executed 10 times */
+#define MBMR_TLFB_11X 0x0000000B /* The Timer Loop is executed 11 times */
+#define MBMR_TLFB_12X 0x0000000C /* The Timer Loop is executed 12 times */
+#define MBMR_TLFB_13X 0x0000000D /* The Timer Loop is executed 13 times */
+#define MBMR_TLFB_14X 0x0000000E /* The Timer Loop is executed 14 times */
+#define MBMR_TLFB_15X 0x0000000F /* The Timer Loop is executed 15 times */
+#define MBMR_TLFB_16X 0x00000000 /* The Timer Loop is executed 16 times */
/*-----------------------------------------------------------------------
* Timer Global Configuration Register 18-8
*/
#define TGCR_CAS4 0x8000 /* Cascade Timer 3 and 4 */
#define TGCR_FRZ4 0x4000 /* Freeze timer 4 */
-#define TGCR_STP4 0x2000 /* Stop timer 4 */
-#define TGCR_RST4 0x1000 /* Reset timer 4 */
+#define TGCR_STP4 0x2000 /* Stop timer 4 */
+#define TGCR_RST4 0x1000 /* Reset timer 4 */
#define TGCR_GM2 0x0800 /* Gate Mode for Pin 2 */
#define TGCR_FRZ3 0x0400 /* Freeze timer 3 */
-#define TGCR_STP3 0x0200 /* Stop timer 3 */
-#define TGCR_RST3 0x0100 /* Reset timer 3 */
+#define TGCR_STP3 0x0200 /* Stop timer 3 */
+#define TGCR_RST3 0x0100 /* Reset timer 3 */
#define TGCR_CAS2 0x0080 /* Cascade Timer 1 and 2 */
#define TGCR_FRZ2 0x0040 /* Freeze timer 2 */
-#define TGCR_STP2 0x0020 /* Stop timer 2 */
-#define TGCR_RST2 0x0010 /* Reset timer 2 */
+#define TGCR_STP2 0x0020 /* Stop timer 2 */
+#define TGCR_RST2 0x0010 /* Reset timer 2 */
#define TGCR_GM1 0x0008 /* Gate Mode for Pin 1 */
#define TGCR_FRZ1 0x0004 /* Freeze timer 1 */
-#define TGCR_STP1 0x0002 /* Stop timer 1 */
-#define TGCR_RST1 0x0001 /* Reset timer 1 */
+#define TGCR_STP1 0x0002 /* Stop timer 1 */
+#define TGCR_RST1 0x0001 /* Reset timer 1 */
/*-----------------------------------------------------------------------
* Timer Mode Register 18-9
*/
-#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
-#define TMR_PS_SHIFT 8 /* Prescaler position */
-#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
-#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
-#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
-#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
-#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
-#define TMR_OM 0x0020 /* Output Mode */
-#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
-#define TMR_FRR 0x0008 /* Free Run/Restart */
-#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
-#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
-#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
-#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
-#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
-#define TMR_GE 0x0001 /* Gate Enable */
+#define TMR_PS_MSK 0xFF00 /* Prescaler Value */
+#define TMR_PS_SHIFT 8 /* Prescaler position */
+#define TMR_CE_MSK 0x00C0 /* Capture Edge and Enable Interrupt */
+#define TMR_CE_INTR_DIS 0x0000 /* Disable Interrupt on capture event */
+#define TMR_CE_RISING 0x0040 /* Capture on Rising TINx edge only */
+#define TMR_CE_FALLING 0x0080 /* Capture on Falling TINx edge only */
+#define TMR_CE_ANY 0x00C0 /* Capture on any TINx edge */
+#define TMR_OM 0x0020 /* Output Mode */
+#define TMR_ORI 0x0010 /* Output Reference Interrupt Enable */
+#define TMR_FRR 0x0008 /* Free Run/Restart */
+#define TMR_ICLK_MSK 0x0006 /* Timer Input Clock Source mask */
+#define TMR_ICLK_IN_CAS 0x0000 /* Internally cascaded input */
+#define TMR_ICLK_IN_GEN 0x0002 /* Internal General system clock */
+#define TMR_ICLK_IN_GEN_DIV16 0x0004 /* Internal General system clk div 16 */
+#define TMR_ICLK_TIN_PIN 0x0006 /* TINx pin */
+#define TMR_GE 0x0001 /* Gate Enable */
/*-----------------------------------------------------------------------
* I2C Controller Registers
*/
-#define I2MOD_REVD 0x20 /* Reverese Data */
+#define I2MOD_REVD 0x20 /* Reverese Data */
#define I2MOD_GCD 0x10 /* General Call Disable */
#define I2MOD_FLT 0x08 /* Clock Filter */
#define I2MOD_PDIV32 0x00 /* Pre-Divider 32 */
#define I2MOD_PDIV16 0x02 /* Pre-Divider 16 */
-#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
-#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
+#define I2MOD_PDIV8 0x04 /* Pre-Divider 8 */
+#define I2MOD_PDIV4 0x06 /* Pre-Divider 4 */
#define I2MOD_EN 0x01 /* Enable */
-#define I2CER_TXE 0x10 /* Tx Error */
+#define I2CER_TXE 0x10 /* Tx Error */
#define I2CER_BSY 0x04 /* Busy Condition */
#define I2CER_TXB 0x02 /* Tx Buffer Transmitted */
#define I2CER_RXB 0x01 /* Rx Buffer Received */
@@ -514,7 +535,7 @@
/*-----------------------------------------------------------------------
* PCMCIA Interface General Control Register 17-12
*/
-#define PCMCIA_GCRX_CXRESET 0x00000040
+#define PCMCIA_GCRX_CXRESET 0x00000040
#define PCMCIA_GCRX_CXOE 0x00000080
#define PCMCIA_VS1(slot) (0x80000000 >> (slot << 4))
@@ -539,36 +560,36 @@
*
* Bank Sizes:
*/
-#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
-#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
-#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
-#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
-#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
-#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
-#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
-#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
-#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
-#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
-#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
-#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
-#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
-#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
+#define PCMCIA_BSIZE_1 0x00000000 /* Bank size: 1 Bytes */
+#define PCMCIA_BSIZE_2 0x08000000 /* Bank size: 2 Bytes */
+#define PCMCIA_BSIZE_4 0x18000000 /* Bank size: 4 Bytes */
+#define PCMCIA_BSIZE_8 0x10000000 /* Bank size: 8 Bytes */
+#define PCMCIA_BSIZE_16 0x30000000 /* Bank size: 16 Bytes */
+#define PCMCIA_BSIZE_32 0x38000000 /* Bank size: 32 Bytes */
+#define PCMCIA_BSIZE_64 0x28000000 /* Bank size: 64 Bytes */
+#define PCMCIA_BSIZE_128 0x20000000 /* Bank size: 128 Bytes */
+#define PCMCIA_BSIZE_256 0x60000000 /* Bank size: 256 Bytes */
+#define PCMCIA_BSIZE_512 0x68000000 /* Bank size: 512 Bytes */
+#define PCMCIA_BSIZE_1K 0x78000000 /* Bank size: 1 kB */
+#define PCMCIA_BSIZE_2K 0x70000000 /* Bank size: 2 kB */
+#define PCMCIA_BSIZE_4K 0x50000000 /* Bank size: 4 kB */
+#define PCMCIA_BSIZE_8K 0x58000000 /* Bank size: 8 kB */
#define PCMCIA_BSIZE_16K 0x48000000 /* Bank size: 16 kB */
#define PCMCIA_BSIZE_32K 0x40000000 /* Bank size: 32 kB */
#define PCMCIA_BSIZE_64K 0xC0000000 /* Bank size: 64 kB */
#define PCMCIA_BSIZE_128K 0xC8000000 /* Bank size: 128 kB */
#define PCMCIA_BSIZE_256K 0xD8000000 /* Bank size: 256 kB */
#define PCMCIA_BSIZE_512K 0xD0000000 /* Bank size: 512 kB */
-#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
-#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
-#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
-#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
+#define PCMCIA_BSIZE_1M 0xF0000000 /* Bank size: 1 MB */
+#define PCMCIA_BSIZE_2M 0xF8000000 /* Bank size: 2 MB */
+#define PCMCIA_BSIZE_4M 0xE8000000 /* Bank size: 4 MB */
+#define PCMCIA_BSIZE_8M 0xE0000000 /* Bank size: 8 MB */
#define PCMCIA_BSIZE_16M 0xA0000000 /* Bank size: 16 MB */
#define PCMCIA_BSIZE_32M 0xA8000000 /* Bank size: 32 MB */
#define PCMCIA_BSIZE_64M 0xB8000000 /* Bank size: 64 MB */
/* PCMCIA Timing */
-#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
+#define PCMCIA_SHT(t) ((t & 0x0F)<<16) /* Strobe Hold Time */
#define PCMCIA_SST(t) ((t & 0x0F)<<12) /* Strobe Setup Time */
#define PCMCIA_SL(t) ((t==32) ? 0 : ((t & 0x1F)<<7)) /* Strobe Length */
@@ -579,10 +600,10 @@
/* PCMCIA Region Select */
#define PCMCIA_PRS_MEM 0x00000000 /* Common Memory Space */
#define PCMCIA_PRS_ATTR 0x00000010 /* Attribute Space */
-#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
-#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
+#define PCMCIA_PRS_IO 0x00000018 /* I/O Space */
+#define PCMCIA_PRS_DMA 0x00000020 /* DMA, normal transfer */
#define PCMCIA_PRS_DMA_LAST 0x00000028 /* DMA, last transactn */
-#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
+#define PCMCIA_PRS_CEx 0x00000030 /* A[22:23] ==> CE1,CE2 */
#define PCMCIA_PSLOT_A 0x00000000 /* Slot A */
#define PCMCIA_PSLOT_B 0x00000004 /* Slot B */
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 1609632be15..388b149e0b8 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -43,7 +43,7 @@
#elif defined(CONFIG_ADS) /* The ADS board use SLOT_A */
# define CONFIG_PCMCIA_SLOT_A
#elif defined(CONFIG_FADS) /* The FADS series are a mess */
-# if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
+# if defined(CONFIG_MPC86x || defined(CONFIG_MPC821)
# define CONFIG_PCMCIA_SLOT_A
# else
# define CONFIG_PCMCIA_SLOT_B
diff --git a/include/version.h b/include/version.h
index fb7411e3aee..e3ce8be3b34 100644
--- a/include/version.h
+++ b/include/version.h
@@ -24,6 +24,6 @@
#ifndef __VERSION_H__
#define __VERSION_H__
-#define U_BOOT_VERSION "U-Boot 0.4.4"
+#define U_BOOT_VERSION "U-Boot 0.4.5"
#endif /* __VERSION_H__ */
diff --git a/post/ether.c b/post/ether.c
index 5b42ca76eb7..d174ad1c010 100644
--- a/post/ether.c
+++ b/post/ether.c
@@ -130,8 +130,8 @@ CPM_CR_CH_SCC4 };
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#if defined(CONFIG_FADS)
-#if defined(CONFIG_MPC860T)
- /* The FADS860T doesn't use the MODEM_EN or DATA_VOICE signals. */
+#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC86xADS)
+ /* The FADS860T and MPC86xADS don't use the MODEM_EN or DATA_VOICE signals. */
*((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
*((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
*((uint *) BCSR1) &= ~BCSR1_ETHEN;