summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile4
-rw-r--r--cpu/mpc85xx/Makefile11
-rw-r--r--cpu/mpc86xx/Makefile5
-rw-r--r--cpu/mpc8xxx/ddr/Makefile31
-rw-r--r--cpu/mpc8xxx/ddr/common_timing_params.h53
-rw-r--r--cpu/mpc8xxx/ddr/ctrl_regs.c993
-rw-r--r--cpu/mpc8xxx/ddr/ddr.h80
-rw-r--r--cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h84
-rw-r--r--cpu/mpc8xxx/ddr/lc_common_dimm_params.c404
-rw-r--r--cpu/mpc8xxx/ddr/main.c473
-rw-r--r--cpu/mpc8xxx/ddr/options.c197
-rw-r--r--cpu/mpc8xxx/ddr/util.c103
-rw-r--r--include/asm-ppc/fsl_ddr_sdram.h137
13 files changed, 2573 insertions, 2 deletions
diff --git a/Makefile b/Makefile
index b9dcbe110f..89fea72e08 100644
--- a/Makefile
+++ b/Makefile
@@ -236,6 +236,10 @@ LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
+LIBS += cpu/mpc8xxx/ddr/libddr.a
+endif
+ifeq ($(CPU),mpc86xx)
+LIBS += cpu/mpc8xxx/ddr/libddr.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index adbc585827..d51a6dd79f 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -33,8 +33,17 @@ SOBJS-$(CONFIG_MP) += release.o
SOBJS = $(SOBJS-y)
COBJS-$(CONFIG_MP) += mp.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+
+ifneq ($(CONFIG_FSL_DDR3),y)
+ifneq ($(CONFIG_FSL_DDR2),y)
+ifneq ($(CONFIG_FSL_DDR1),y)
+COBJS-y += spd_sdram.o
+endif
+endif
+endif
+
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o tlb.o \
- pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o \
+ pci.o serial_scc.o commproc.o ether_fcc.o qe_io.o \
$(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index 537f62a323..454c728409 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -36,10 +36,13 @@ COBJS-y += cpu.o
COBJS-y += cpu_init.o
COBJS-y += speed.o
COBJS-y += interrupts.o
-COBJS-y += spd_sdram.o
COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+ifneq ($(CONFIG_FSL_DDR2),y)
+COBJS-y += spd_sdram.o
+endif
+
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
START := $(addprefix $(obj),$(START))
diff --git a/cpu/mpc8xxx/ddr/Makefile b/cpu/mpc8xxx/ddr/Makefile
new file mode 100644
index 0000000000..b7f8d8cf57
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/Makefile
@@ -0,0 +1,31 @@
+#
+# Copyright 2008 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# Version 2 as published by the Free Software Foundation.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)libddr.a
+
+COBJS-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
+ lc_common_dimm_params.o
+COBJS-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o
+
+COBJS-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \
+ lc_common_dimm_params.o
+COBJS-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o
+
+SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
diff --git a/cpu/mpc8xxx/ddr/common_timing_params.h b/cpu/mpc8xxx/ddr/common_timing_params.h
new file mode 100644
index 0000000000..5aea517f25
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/common_timing_params.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef COMMON_TIMING_PARAMS_H
+#define COMMON_TIMING_PARAMS_H
+
+typedef struct {
+ /* parameters to constrict */
+
+ unsigned int tCKmin_X_ps;
+ unsigned int tCKmax_ps;
+ unsigned int tCKmax_max_ps;
+ unsigned int tRCD_ps;
+ unsigned int tRP_ps;
+ unsigned int tRAS_ps;
+
+ unsigned int tWR_ps; /* maximum = 63750 ps */
+ unsigned int tWTR_ps; /* maximum = 63750 ps */
+ unsigned int tRFC_ps; /* maximum = 255 ns + 256 ns + .75 ns
+ = 511750 ps */
+
+ unsigned int tRRD_ps; /* maximum = 63750 ps */
+ unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
+
+ unsigned int refresh_rate_ps;
+
+ unsigned int tIS_ps; /* byte 32, spd->ca_setup */
+ unsigned int tIH_ps; /* byte 33, spd->ca_hold */
+ unsigned int tDS_ps; /* byte 34, spd->data_setup */
+ unsigned int tDH_ps; /* byte 35, spd->data_hold */
+ unsigned int tRTP_ps; /* byte 38, spd->trtp */
+ unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
+ unsigned int tQHS_ps; /* byte 45, spd->tqhs */
+
+ unsigned int ndimms_present;
+ unsigned int lowest_common_SPD_caslat;
+ unsigned int highest_common_derated_caslat;
+ unsigned int additive_latency;
+ unsigned int all_DIMMs_burst_lengths_bitmask;
+ unsigned int all_DIMMs_registered;
+ unsigned int all_DIMMs_unbuffered;
+ unsigned int all_DIMMs_ECC_capable;
+
+ unsigned long long total_mem;
+ unsigned long long base_address;
+} common_timing_params_t;
+
+#endif
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
new file mode 100644
index 0000000000..ca675512a2
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -0,0 +1,993 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+extern unsigned int picos_to_mclk(unsigned int picos);
+/*
+ * Determine Rtt value.
+ *
+ * This should likely be either board or controller specific.
+ *
+ * Rtt(nominal):
+ * 0 = Rtt disabled
+ * 1 = 75 ohm
+ * 2 = 150 ohm
+ * 3 = 50 ohm
+ *
+ * FIXME: Apparently 8641 needs a value of 2
+ * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
+ *
+ * FIXME: There was some effort down this line earlier:
+ *
+ * unsigned int i;
+ * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
+ * if (popts->dimmslot[i].num_valid_cs
+ * && (popts->cs_local_opts[2*i].odt_rd_cfg
+ * || popts->cs_local_opts[2*i].odt_wr_cfg)) {
+ * rtt = 2;
+ * break;
+ * }
+ * }
+ */
+static inline int fsl_ddr_get_rtt(void)
+{
+ int rtt;
+
+#if defined(CONFIG_FSL_DDR1)
+ rtt = 0;
+#elif defined(CONFIG_FSL_DDR2)
+ rtt = 3;
+#else
+#error "Need Rtt value for DDR3"
+#endif
+
+ return rtt;
+}
+
+/* Chip Select Configuration (CSn_CONFIG) */
+static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
+{
+ unsigned int cs_n_en = 0; /* Chip Select enable */
+ unsigned int intlv_en = 0; /* Memory controller interleave enable */
+ unsigned int intlv_ctl = 0; /* Interleaving control */
+ unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
+ unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
+ unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
+ unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
+ unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
+ unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
+
+ /* Compute CS_CONFIG only for existing ranks of each DIMM. */
+ if ((((i&1) == 0)
+ && (dimm_params[i/2].n_ranks == 1))
+ || (dimm_params[i/2].n_ranks == 2)) {
+ unsigned int n_banks_per_sdram_device;
+ cs_n_en = 1;
+ if (i == 0) {
+ /* These fields only available in CS0_CONFIG */
+ intlv_en = popts->memctl_interleaving;
+ intlv_ctl = popts->memctl_interleaving_mode;
+ }
+ ap_n_en = popts->cs_local_opts[i].auto_precharge;
+ odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
+ odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
+ n_banks_per_sdram_device
+ = dimm_params[i/2].n_banks_per_sdram_device;
+ ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
+ row_bits_cs_n = dimm_params[i/2].n_row_addr - 12;
+ col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
+ }
+
+ /* FIXME: intlv_en, intlv_ctl only on CS0_CONFIG */
+ if (i != 0) {
+ intlv_en = 0;
+ intlv_ctl = 0;
+ }
+
+ ddr->cs[i].config = (0
+ | ((cs_n_en & 0x1) << 31)
+ | ((intlv_en & 0x3) << 29)
+ | ((intlv_en & 0xf) << 24)
+ | ((ap_n_en & 0x1) << 23)
+
+ /* XXX: some implementation only have 1 bit starting at left */
+ | ((odt_rd_cfg & 0x7) << 20)
+
+ /* XXX: Some implementation only have 1 bit starting at left */
+ | ((odt_wr_cfg & 0x7) << 16)
+
+ | ((ba_bits_cs_n & 0x3) << 14)
+ | ((row_bits_cs_n & 0x7) << 8)
+ | ((col_bits_cs_n & 0x7) << 0)
+ );
+}
+
+/* Chip Select Configuration 2 (CSn_CONFIG_2) */
+/* FIXME: 8572 */
+static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int pasr_cfg = 0; /* Partial array self refresh config */
+
+ ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
+}
+
+/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
+
+#if defined(CONFIG_FSL_DDR2)
+/*
+ * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
+ *
+ * Avoid writing for DDR I. The new PQ38 DDR controller
+ * dreams up non-zero default values to be backwards compatible.
+ */
+static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
+ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
+ /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
+ unsigned char trrt_mclk = 0; /* Read-to-read turnaround */
+ unsigned char twwt_mclk = 0; /* Write-to-write turnaround */
+
+ /* Active powerdown exit timing (tXARD and tXARDS). */
+ unsigned char act_pd_exit_mclk;
+ /* Precharge powerdown exit timing (tXP). */
+ unsigned char pre_pd_exit_mclk;
+ /* Precharge powerdown exit timing (tAXPD). */
+ unsigned char taxpd_mclk;
+ /* Mode register set cycle time (tMRD). */
+ unsigned char tmrd_mclk;
+
+ /* (tXARD and tXARDS). Empirical? */
+ act_pd_exit_mclk = 2;
+
+ /* XXX: tXARD = 2, tXARDS = 7 - AL. * Empirical? */
+ pre_pd_exit_mclk = 6;
+
+ /* FIXME: tXP = 2 on Micron 667 MHz DIMM */
+ taxpd_mclk = 8;
+
+ tmrd_mclk = 2;
+
+ ddr->timing_cfg_0 = (0
+ | ((trwt_mclk & 0x3) << 30) /* RWT */
+ | ((twrt_mclk & 0x3) << 28) /* WRT */
+ | ((trrt_mclk & 0x3) << 26) /* RRT */
+ | ((twwt_mclk & 0x3) << 24) /* WWT */
+ | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */
+ | ((pre_pd_exit_mclk & 0x7) << 16) /* PRE_PD_EXIT */
+ | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */
+ | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */
+ );
+ debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
+}
+#endif /* defined(CONFIG_FSL_DDR2) */
+
+/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
+static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm)
+{
+ /* Extended Activate to precharge interval (tRAS) */
+ unsigned int ext_acttopre = 0;
+ unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */
+ unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
+ unsigned int cntl_adj = 0; /* Control Adjust */
+
+ ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
+ ddr->timing_cfg_3 = (0
+ | ((ext_acttopre & 0x1) << 24)
+ | ((ext_refrec & 0x7) << 16)
+ | ((ext_caslat & 0x1) << 12)
+ | ((cntl_adj & 0x7) << 0)
+ );
+}
+
+/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
+static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency)
+{
+ /* Precharge-to-activate interval (tRP) */
+ unsigned char pretoact_mclk;
+ /* Activate to precharge interval (tRAS) */
+ unsigned char acttopre_mclk;
+ /* Activate to read/write interval (tRCD) */
+ unsigned char acttorw_mclk;
+ /* CASLAT */
+ unsigned char caslat_ctrl;
+ /* Refresh recovery time (tRFC) ; trfc_low */
+ unsigned char refrec_ctrl;
+ /* Last data to precharge minimum interval (tWR) */
+ unsigned char wrrec_mclk;
+ /* Activate-to-activate interval (tRRD) */
+ unsigned char acttoact_mclk;
+ /* Last write data pair to read command issue interval (tWTR) */
+ unsigned char wrtord_mclk;
+
+ pretoact_mclk = picos_to_mclk(common_dimm->tRP_ps);
+ acttopre_mclk = picos_to_mclk(common_dimm->tRAS_ps);
+ acttorw_mclk = picos_to_mclk(common_dimm->tRCD_ps);
+
+ /*
+ * Translate CAS Latency to a DDR controller field value:
+ *
+ * CAS Lat DDR I DDR II Ctrl
+ * Clocks SPD Bit SPD Bit Value
+ * ------- ------- ------- -----
+ * 1.0 0 0001
+ * 1.5 1 0010
+ * 2.0 2 2 0011
+ * 2.5 3 0100
+ * 3.0 4 3 0101
+ * 3.5 5 0110
+ * 4.0 4 0111
+ * 4.5 1000
+ * 5.0 5 1001
+ */
+#if defined(CONFIG_FSL_DDR1)
+ caslat_ctrl = (cas_latency + 1) & 0x07;
+#elif defined(CONFIG_FSL_DDR2)
+ caslat_ctrl = 2 * cas_latency - 1;
+#else
+#error "Need CAS Latency help for DDR3 in fsl_ddr_sdram.c"
+#endif
+
+ refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8;
+ wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps);
+ acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps);
+ wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps);
+
+ ddr->timing_cfg_1 = (0
+ | ((pretoact_mclk & 0x07) << 28)
+ | ((acttopre_mclk & 0x0F) << 24)
+ | ((acttorw_mclk & 0x7) << 20)
+ | ((caslat_ctrl & 0xF) << 16)
+ | ((refrec_ctrl & 0xF) << 12)
+ | ((wrrec_mclk & 0x07) << 8)
+ | ((acttoact_mclk & 0x07) << 4)
+ | ((wrtord_mclk & 0x07) << 0)
+ );
+}
+
+/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
+static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
+{
+ /* Additive latency */
+ unsigned char add_lat_mclk;
+ /* CAS-to-preamble override */
+ unsigned short cpo;
+ /* Write latency */
+ unsigned char wr_lat;
+ /* Read to precharge (tRTP) */
+ unsigned char rd_to_pre;
+ /* Write command to write data strobe timing adjustment */
+ unsigned char wr_data_delay;
+ /* Minimum CKE pulse width (tCKE) */
+ unsigned char cke_pls;
+ /* Window for four activates (tFAW) */
+ unsigned short four_act;
+
+ /* FIXME add check that this must be less than acttorw_mclk */
+ add_lat_mclk = additive_latency;
+ cpo = popts->cpo_override;
+
+#if defined(CONFIG_FSL_DDR1)
+ /*
+ * This is a lie. It should really be 1, but if it is
+ * set to 1, bits overlap into the old controller's
+ * otherwise unused ACSM field. If we leave it 0, then
+ * the HW will magically treat it as 1 for DDR 1. Oh Yea.
+ */
+ wr_lat = 0;
+#elif defined(CONFIG_FSL_DDR2)
+ wr_lat = cas_latency + additive_latency - 1;
+#else
+#error "Fix WR_LAT for DDR3"
+#endif
+
+ rd_to_pre = picos_to_mclk(common_dimm->tRTP_ps);
+ wr_data_delay = popts->write_data_delay;
+ cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
+ four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
+
+ ddr->timing_cfg_2 = (0
+ | ((add_lat_mclk & 0x7) << 28)
+ | ((cpo & 0x1f) << 23)
+ | ((wr_lat & 0x7) << 19)
+ | ((rd_to_pre & 0x7) << 13)
+ | ((wr_data_delay & 0x7) << 10)
+ | ((cke_pls & 0x7) << 6)
+ | ((four_act & 0x1f) << 0)
+ );
+}
+
+/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
+static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
+{
+ unsigned int mem_en; /* DDR SDRAM interface logic enable */
+ unsigned int sren; /* Self refresh enable (during sleep) */
+ unsigned int ecc_en; /* ECC enable. */
+ unsigned int rd_en; /* Registered DIMM enable */
+ unsigned int sdram_type; /* Type of SDRAM */
+ unsigned int dyn_pwr; /* Dynamic power management mode */
+ unsigned int dbw; /* DRAM dta bus width */
+ unsigned int eight_be; /* 8-beat burst enable */
+ unsigned int ncap = 0; /* Non-concurrent auto-precharge */
+ unsigned int threeT_en; /* Enable 3T timing */
+ unsigned int twoT_en; /* Enable 2T timing */
+ unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */
+ unsigned int x32_en = 0; /* x32 enable */
+ unsigned int pchb8 = 0; /* precharge bit 8 enable */
+ unsigned int hse; /* Global half strength override */
+ unsigned int mem_halt = 0; /* memory controller halt */
+ unsigned int bi = 0; /* Bypass initialization */
+
+ mem_en = 1;
+ sren = popts->self_refresh_in_sleep;
+ if (common_dimm->all_DIMMs_ECC_capable) {
+ /* Allow setting of ECC only if all DIMMs are ECC. */
+ ecc_en = popts->ECC_mode;
+ } else {
+ ecc_en = 0;
+ }
+
+ rd_en = (common_dimm->all_DIMMs_registered
+ && !common_dimm->all_DIMMs_unbuffered);
+
+ sdram_type = CONFIG_FSL_SDRAM_TYPE;
+
+ dyn_pwr = popts->dynamic_power;
+ dbw = popts->data_bus_width;
+ eight_be = 0; /* always 0 for DDR2 */
+ threeT_en = popts->threeT_en;
+ twoT_en = popts->twoT_en;
+ ba_intlv_ctl = popts->ba_intlv_ctl;
+ hse = popts->half_strength_driver_enable;
+
+ ddr->ddr_sdram_cfg = (0
+ | ((mem_en & 0x1) << 31)
+ | ((sren & 0x1) << 30)
+ | ((ecc_en & 0x1) << 29)
+ | ((rd_en & 0x1) << 28)
+ | ((sdram_type & 0x7) << 24)
+ | ((dyn_pwr & 0x1) << 21)
+ | ((dbw & 0x3) << 19)
+ | ((eight_be & 0x1) << 18)
+ | ((ncap & 0x1) << 17)
+ | ((threeT_en & 0x1) << 16)
+ | ((twoT_en & 0x1) << 15)
+ | ((ba_intlv_ctl & 0x7F) << 8)
+ | ((x32_en & 0x1) << 5)
+ | ((pchb8 & 0x1) << 4)
+ | ((hse & 0x1) << 3)
+ | ((mem_halt & 0x1) << 1)
+ | ((bi & 0x1) << 0)
+ );
+}
+
+/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
+static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned int frc_sr = 0; /* Force self refresh */
+ unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
+ unsigned int dll_rst_dis; /* DLL reset disable */
+ unsigned int dqs_cfg; /* DQS configuration */
+ unsigned int odt_cfg; /* ODT configuration */
+ unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
+ unsigned int ap_en; /* Address Parity Enable */
+ unsigned int d_init; /* DRAM data initialization */
+ unsigned int rcw_en = 0; /* Register Control Word Enable */
+ unsigned int md_en = 0; /* Mirrored DIMM Enable */
+
+ dll_rst_dis = 1; /* Make this configurable */
+ dqs_cfg = popts->DQS_config;
+ if (popts->cs_local_opts[0].odt_rd_cfg
+ || popts->cs_local_opts[0].odt_wr_cfg) {
+ /* FIXME */
+ odt_cfg = 2;
+ } else {
+ odt_cfg = 0;
+ }
+
+ num_pr = 1; /* Make this configurable */
+
+ /*
+ * 8572 manual says
+ * {TIMING_CFG_1[PRETOACT]
+ * + [DDR_SDRAM_CFG_2[NUM_PR]
+ * * ({EXT_REFREC || REFREC} + 8 + 2)]}
+ * << DDR_SDRAM_INTERVAL[REFINT]
+ */
+
+ obc_cfg = 0; /* Make this configurable? */
+ ap_en = 0; /* Make this configurable? */
+
+#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /* Use the DDR controller to auto initialize memory. */
+ d_init = 1;
+ ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
+ debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
+#else
+ /* Memory will be initialized via DMA, or not at all. */
+ d_init = 0;
+#endif
+
+ ddr->ddr_sdram_cfg_2 = (0
+ | ((frc_sr & 0x1) << 31)
+ | ((sr_ie & 0x1) << 30)
+ | ((dll_rst_dis & 0x1) << 29)
+ | ((dqs_cfg & 0x3) << 26)
+ | ((odt_cfg & 0x3) << 21)
+ | ((num_pr & 0xf) << 12)
+ | ((obc_cfg & 0x1) << 6)
+ | ((ap_en & 0x1) << 5)
+ | ((d_init & 0x1) << 4)
+ | ((rcw_en & 0x1) << 2)
+ | ((md_en & 0x1) << 0)
+ );
+}
+
+/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
+static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
+ unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
+
+ ddr->ddr_sdram_mode_2 = (0
+ | ((esdmode2 & 0xFFFF) << 16)
+ | ((esdmode3 & 0xFFFF) << 0)
+ );
+}
+
+/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
+static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm)
+{
+ unsigned int refint; /* Refresh interval */
+ unsigned int bstopre; /* Precharge interval */
+
+ refint = picos_to_mclk(common_dimm->refresh_rate_ps);
+
+ bstopre = popts->bstopre;
+
+ /* refint field used 0x3FFF in earlier controllers */
+ ddr->ddr_sdram_interval = (0
+ | ((refint & 0xFFFF) << 16)
+ | ((bstopre & 0x3FFF) << 0)
+ );
+}
+
+/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
+static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts,
+ const common_timing_params_t *common_dimm,
+ unsigned int cas_latency,
+ unsigned int additive_latency)
+{
+ unsigned short esdmode; /* Extended SDRAM mode */
+ unsigned short sdmode; /* SDRAM mode */
+
+ /*
+ * FIXME: This ought to be pre-calculated in a
+ * technology-specific routine,
+ * e.g. compute_DDR2_mode_register(), and then the
+ * sdmode and esdmode passed in as part of common_dimm.
+ */
+
+ /* Extended Mode Register */
+ unsigned int mrs = 0; /* Mode Register Set */
+ unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */
+ unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */
+ unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */
+ unsigned int ocd = 0; /* 0x0=OCD not supported,
+ 0x7=OCD default state */
+ unsigned int rtt;
+ unsigned int al; /* Posted CAS# additive latency (AL) */
+ unsigned int ods = 0; /* Output Drive Strength:
+ 0 = Full strength (18ohm)
+ 1 = Reduced strength (4ohm) */
+ unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
+ 1=Disable (Test/Debug) */
+
+ /* Mode Register (MR) */
+ unsigned int mr; /* Mode Register Definition */
+ unsigned int pd; /* Power-Down Mode */
+ unsigned int wr; /* Write Recovery */
+ unsigned int dll_res; /* DLL Reset */
+ unsigned int mode; /* Normal=0 or Test=1 */
+ unsigned int caslat; /* CAS# latency */
+ /* BT: Burst Type (0=Sequential, 1=Interleaved) */
+ unsigned int bt;
+ unsigned int bl; /* BL: Burst Length */
+
+#if defined(CONFIG_FSL_DDR2)
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+#endif
+
+ rtt = fsl_ddr_get_rtt();
+
+ al = additive_latency;
+
+ esdmode = (0
+ | ((mrs & 0x3) << 14)
+ | ((outputs & 0x1) << 12)
+ | ((rdqs_en & 0x1) << 11)
+ | ((dqs_en & 0x1) << 10)
+ | ((ocd & 0x7) << 7)
+ | ((rtt & 0x2) << 5) /* rtt field is split */
+ | ((al & 0x7) << 3)
+ | ((rtt & 0x1) << 2) /* rtt field is split */
+ | ((ods & 0x1) << 1)
+ | ((dll_en & 0x1) << 0)
+ );
+
+ mr = 0; /* FIXME: CHECKME */
+
+ /*
+ * 0 = Fast Exit (Normal)
+ * 1 = Slow Exit (Low Power)
+ */
+ pd = 0;
+
+#if defined(CONFIG_FSL_DDR1)
+ wr = 0; /* Historical */
+#elif defined(CONFIG_FSL_DDR2)
+ wr = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps - 1;
+#else
+#error "Write tWR_auto for DDR3"
+#endif
+ dll_res = 0;
+ mode = 0;
+
+#if defined(CONFIG_FSL_DDR1)
+ if (1 <= cas_latency && cas_latency <= 4) {
+ unsigned char mode_caslat_table[4] = {
+ 0x5, /* 1.5 clocks */
+ 0x2, /* 2.0 clocks */
+ 0x6, /* 2.5 clocks */
+ 0x3 /* 3.0 clocks */
+ };
+ caslat = mode_caslat_table[cas_latency - 1];
+ }
+#elif defined(CONFIG_FSL_DDR2)
+ caslat = cas_latency;
+#else
+#error "Fix the mode CAS Latency for DDR3"
+#endif
+ bt = 0;
+
+ switch (popts->burst_length) {
+ case 4:
+ bl = 2;
+ break;
+ case 8:
+ bl = 3;
+ break;
+ default:
+ printf("Error: invalid burst length of %u specified. "
+ " Defaulting to 4 beats.\n",
+ popts->burst_length);
+ bl = 2;
+ break;
+ }
+
+ sdmode = (0
+ | ((mr & 0x3) << 14)
+ | ((pd & 0x1) << 12)
+ | ((wr & 0x7) << 9)
+ | ((dll_res & 0x1) << 8)
+ | ((mode & 0x1) << 7)
+ | ((caslat & 0x7) << 4)
+ | ((bt & 0x1) << 3)
+ | ((bl & 0x7) << 0)
+ );
+
+ ddr->ddr_sdram_mode = (0
+ | ((esdmode & 0xFFFF) << 16)
+ | ((sdmode & 0xFFFF) << 0)
+ );
+}
+
+
+/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
+static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int init_value; /* Initialization value */
+
+ init_value = 0xDEADBEEF;
+ ddr->ddr_data_init = init_value;
+}
+
+/*
+ * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
+ * The old controller on the 8540/60 doesn't have this register.
+ * Hope it's OK to set it (to 0) anyway.
+ */
+static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
+ const memctl_options_t *popts)
+{
+ unsigned int clk_adjust; /* Clock adjust */
+
+ clk_adjust = popts->clk_adjust;
+ ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
+}
+
+/* DDR Initialization Address (DDR_INIT_ADDR) */
+static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int init_addr = 0; /* Initialization address */
+
+ ddr->ddr_init_addr = init_addr;
+}
+
+/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
+static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int uia = 0; /* Use initialization address */
+ unsigned int init_ext_addr = 0; /* Initialization address */
+
+ ddr->ddr_init_ext_addr = (0
+ | ((uia & 0x1) << 31)
+ | (init_ext_addr & 0xF)
+ );
+}
+
+/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
+static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
+ unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
+ unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
+ unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
+ unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
+
+ ddr->timing_cfg_4 = (0
+ | ((rwt & 0xf) << 28)
+ | ((wrt & 0xf) << 24)
+ | ((rrt & 0xf) << 20)
+ | ((wwt & 0xf) << 16)
+ | (dll_lock & 0x3)
+ );
+}
+
+/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
+static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rodt_on = 0; /* Read to ODT on */
+ unsigned int rodt_off = 0; /* Read to ODT off */
+ unsigned int wodt_on = 0; /* Write to ODT on */
+ unsigned int wodt_off = 0; /* Write to ODT off */
+
+ ddr->timing_cfg_5 = (0
+ | ((rodt_on & 0xf) << 24)
+ | ((rodt_off & 0xf) << 20)
+ | ((wodt_on & 0xf) << 12)
+ | ((wodt_off & 0xf) << 8)
+ );
+}
+
+/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
+static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int zq_en = 0; /* ZQ Calibration Enable */
+ unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
+ /* Normal Operation Full Calibration Time (tZQoper) */
+ unsigned int zqoper = 0;
+ /* Normal Operation Short Calibration Time (tZQCS) */
+ unsigned int zqcs = 0;
+
+ ddr->ddr_zq_cntl = (0
+ | ((zq_en & 0x1) << 31)
+ | ((zqinit & 0xF) << 24)
+ | ((zqoper & 0xF) << 16)
+ | ((zqcs & 0xF) << 8)
+ );
+}
+
+/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
+static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int wrlvl_en = 0; /* Write Leveling Enable */
+ /*
+ * First DQS pulse rising edge after margining mode
+ * is programmed (tWL_MRD)
+ */
+ unsigned int wrlvl_mrd = 0;
+ /* ODT delay after margining mode is programmed (tWL_ODTEN) */
+ unsigned int wrlvl_odten = 0;
+ /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
+ unsigned int wrlvl_dqsen = 0;
+ /* WRLVL_SMPL: Write leveling sample time */
+ unsigned int wrlvl_smpl = 0;
+ /* WRLVL_WLR: Write leveling repeition time */
+ unsigned int wrlvl_wlr = 0;
+ /* WRLVL_START: Write leveling start time */
+ unsigned int wrlvl_start = 0;
+
+ ddr->ddr_wrlvl_cntl = (0
+ | ((wrlvl_en & 0x1) << 31)
+ | ((wrlvl_mrd & 0x7) << 24)
+ | ((wrlvl_odten & 0x7) << 20)
+ | ((wrlvl_dqsen & 0x7) << 16)
+ | ((wrlvl_smpl & 0xf) << 12)
+ | ((wrlvl_wlr & 0x7) << 8)
+ | ((wrlvl_start & 0xF) << 0)
+ );
+}
+
+/* DDR Self Refresh Counter (DDR_SR_CNTR) */
+static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int sr_it = 0; /* Self Refresh Idle Threshold */
+
+ ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
+}
+
+/* DDR Pre-Drive Conditioning Control (DDR_PD_CNTL) */
+static void set_ddr_pd_cntl(fsl_ddr_cfg_regs_t *ddr)
+{
+ /* Termination value during pre-drive conditioning */
+ unsigned int tvpd = 0;
+ unsigned int pd_en = 0; /* Pre-Drive Conditioning Enable */
+ unsigned int pdar = 0; /* Pre-Drive After Read */
+ unsigned int pdaw = 0; /* Pre-Drive After Write */
+ unsigned int pd_on = 0; /* Pre-Drive Conditioning On */
+ unsigned int pd_off = 0; /* Pre-Drive Conditioning Off */
+
+ ddr->ddr_pd_cntl = (0
+ | ((pd_en & 0x1) << 31)
+ | ((tvpd & 0x7) << 28)
+ | ((pdar & 0x7F) << 20)
+ | ((pdaw & 0x7F) << 12)
+ | ((pd_on & 0x1F) << 6)
+ | ((pd_off & 0x1F) << 0)
+ );
+}
+
+
+/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */
+static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */
+ unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */
+ unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */
+ unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */
+ unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */
+ unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */
+ unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */
+ unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */
+
+ ddr->ddr_sdram_rcw_1 = (0
+ | ((rcw0 & 0xF) << 28)
+ | ((rcw1 & 0xF) << 24)
+ | ((rcw2 & 0xF) << 20)
+ | ((rcw3 & 0xF) << 16)
+ | ((rcw4 & 0xF) << 12)
+ | ((rcw5 & 0xF) << 8)
+ | ((rcw6 & 0xF) << 4)
+ | ((rcw7 & 0xF) << 0)
+ );
+}
+
+/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */
+static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */
+ unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */
+ unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */
+ unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */
+ unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */
+ unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */
+ unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */
+ unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */
+
+ ddr->ddr_sdram_rcw_2 = (0
+ | ((rcw8 & 0xF) << 28)
+ | ((rcw9 & 0xF) << 24)
+ | ((rcw10 & 0xF) << 20)
+ | ((rcw11 & 0xF) << 16)
+ | ((rcw12 & 0xF) << 12)
+ | ((rcw13 & 0xF) << 8)
+ | ((rcw14 & 0xF) << 4)
+ | ((rcw15 & 0xF) << 0)
+ );
+}
+
+unsigned int
+check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
+{
+ unsigned int res = 0;
+
+ /*
+ * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
+ * not set at the same time.
+ */
+ if (ddr->ddr_sdram_cfg & 0x10000000
+ && ddr->ddr_sdram_cfg & 0x00008000) {
+ printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
+ " should not be set at the same time.\n");
+ res++;
+ }
+
+ return res;
+}
+
+unsigned int
+compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ const dimm_params_t *dimm_params,
+ unsigned int dbw_cap_adj)
+{
+ unsigned int i;
+ unsigned int cas_latency;
+ unsigned int additive_latency;
+
+ memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
+
+ if (common_dimm == NULL) {
+ printf("Error: subset DIMM params struct null pointer\n");
+ return 1;
+ }
+
+ /*
+ * Process overrides first.
+ *
+ * FIXME: somehow add dereated caslat to this
+ */
+ cas_latency = (popts->cas_latency_override)
+ ? popts->cas_latency_override_value
+ : common_dimm->lowest_common_SPD_caslat;
+
+ additive_latency = (popts->additive_latency_override)
+ ? popts->additive_latency_override_value
+ : common_dimm->additive_latency;
+
+ /* Chip Select Memory Bounds (CSn_BNDS) */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ phys_size_t sa = 0;
+ phys_size_t ea = 0;
+ if (popts->ba_intlv_ctl && i > 0) {
+ /* Don't set up boundaries if bank interleaving */
+ break;
+ }
+
+ if (dimm_params[i/2].n_ranks == 0) {
+ debug("Skipping setup of CS%u "
+ "because n_ranks on DIMM %u is 0\n", i, i/2);
+ continue;
+ }
+ if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
+ /*
+ * This works superbank 2CS
+ * There are 2 memory controllers configured
+ * identically, memory is interleaved between them,
+ * and each controller uses rank interleaving within
+ * itself. Therefore the starting and ending address
+ * on each controller is twice the amount present on
+ * each controller.
+ */
+ ea = (2 * common_dimm->total_mem >> dbw_cap_adj) - 1;
+ }
+ else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
+ /*
+ * If memory interleaving between controllers is NOT
+ * enabled, the starting address for each memory
+ * controller is distinct. However, because rank
+ * interleaving is enabled, the starting and ending
+ * addresses of the total memory on that memory
+ * controller needs to be programmed into its
+ * respective CS0_BNDS.
+ */
+ sa = common_dimm->base_address;
+ ea = sa + (common_dimm->total_mem >> dbw_cap_adj) - 1;
+ }
+ else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
+ /*
+ * Only the rank on CS0 of each memory controller may
+ * be used if memory controller interleaving is used
+ * without rank interleaving within each memory
+ * controller. However, the ending address programmed
+ * into each CS0 must be the sum of the amount of
+ * memory in the two CS0 ranks.
+ */
+ if (i == 0) {
+ unsigned long long rank_density
+ = dimm_params[0].rank_density;
+ ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
+ }
+
+ }
+ else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) {
+ /*
+ * No rank interleaving and no memory controller
+ * interleaving.
+ */
+ unsigned long long rank_density
+ = dimm_params[i/2].rank_density;
+ sa = dimm_params[i/2].base_address;
+ ea = sa + (rank_density >> dbw_cap_adj) - 1;
+ if (i&1) {
+ if ((dimm_params[i/2].n_ranks == 1)) {
+ /* Odd chip select, single-rank dimm */
+ sa = 0;
+ ea = 0;
+ } else {
+ /* Odd chip select, dual-rank DIMM */
+ sa += rank_density >> dbw_cap_adj;
+ ea += rank_density >> dbw_cap_adj;
+ }
+ }
+ }
+
+ sa >>= 24;
+ ea >>= 24;
+
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16) /* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+
+ set_csn_config(i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
+ }
+
+#if defined(CONFIG_FSL_DDR2)
+ set_timing_cfg_0(ddr);
+#endif
+
+ set_timing_cfg_3(ddr, common_dimm);
+ set_timing_cfg_1(ddr, common_dimm, cas_latency);
+ set_timing_cfg_2(ddr, popts, common_dimm,
+ cas_latency, additive_latency);
+
+ set_ddr_sdram_cfg(ddr, popts, common_dimm);
+
+ set_ddr_sdram_cfg_2(ddr, popts);
+ set_ddr_sdram_mode(ddr, popts, common_dimm,
+ cas_latency, additive_latency);
+ set_ddr_sdram_mode_2(ddr);
+ set_ddr_sdram_interval(ddr, popts, common_dimm);
+ set_ddr_data_init(ddr);
+ set_ddr_sdram_clk_cntl(ddr, popts);
+ set_ddr_init_addr(ddr);
+ set_ddr_init_ext_addr(ddr);
+ set_timing_cfg_4(ddr);
+ set_timing_cfg_5(ddr);
+
+ set_ddr_zq_cntl(ddr);
+ set_ddr_wrlvl_cntl(ddr);
+
+ set_ddr_pd_cntl(ddr);
+ set_ddr_sr_cntr(ddr);
+
+ set_ddr_sdram_rcw_1(ddr);
+ set_ddr_sdram_rcw_2(ddr);
+
+ return check_fsl_memctl_config_regs(ddr);
+}
diff --git a/cpu/mpc8xxx/ddr/ddr.h b/cpu/mpc8xxx/ddr/ddr.h
new file mode 100644
index 0000000000..f5dc40a537
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/ddr.h
@@ -0,0 +1,80 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef FSL_DDR_MAIN_H
+#define FSL_DDR_MAIN_H
+
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr1_2_dimm_params.h"
+#include "common_timing_params.h"
+
+/*
+ * Bind the main DDR setup driver's generic names
+ * to this specific DDR technology.
+ */
+static __inline__ int
+compute_dimm_parameters(const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number)
+{
+ return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
+}
+
+/*
+ * Data Structures
+ *
+ * All data structures have to be on the stack
+ */
+#define CFG_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
+#define CFG_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
+
+typedef struct {
+ generic_spd_eeprom_t
+ spd_installed_dimms[CFG_NUM_DDR_CTLRS][CFG_DIMM_SLOTS_PER_CTLR];
+ struct dimm_params_s
+ dimm_params[CFG_NUM_DDR_CTLRS][CFG_DIMM_SLOTS_PER_CTLR];
+ memctl_options_t memctl_opts[CFG_NUM_DDR_CTLRS];
+ common_timing_params_t common_timing_params[CFG_NUM_DDR_CTLRS];
+ fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CFG_NUM_DDR_CTLRS];
+} fsl_ddr_info_t;
+
+/* Compute steps */
+#define STEP_GET_SPD (1 << 0)
+#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
+#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
+#define STEP_GATHER_OPTS (1 << 3)
+#define STEP_ASSIGN_ADDRESSES (1 << 4)
+#define STEP_COMPUTE_REGS (1 << 5)
+#define STEP_PROGRAM_REGS (1 << 6)
+#define STEP_ALL 0xFFF
+
+extern phys_size_t
+fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step);
+
+extern const char * step_to_string(unsigned int step);
+
+extern unsigned int
+compute_fsl_memctl_config_regs(const memctl_options_t *popts,
+ fsl_ddr_cfg_regs_t *ddr,
+ const common_timing_params_t *common_dimm,
+ const dimm_params_t *dimm_parameters,
+ unsigned int dbw_capacity_adjust);
+extern unsigned int
+compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+ common_timing_params_t *outpdimm,
+ unsigned int number_of_dimms);
+extern unsigned int populate_memctl_options(int all_DIMMs_registered,
+ memctl_options_t *popts,
+ unsigned int ctrl_num);
+
+extern unsigned int mclk_to_picos(unsigned int mclk);
+extern unsigned int get_memory_clk_period_ps(void);
+extern unsigned int picos_to_mclk(unsigned int picos);
+
+#endif
diff --git a/cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h b/cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h
new file mode 100644
index 0000000000..c794eedfe4
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/ddr1_2_dimm_params.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef DDR2_DIMM_PARAMS_H
+#define DDR2_DIMM_PARAMS_H
+
+/* Parameters for a DDR2 dimm computed from the SPD */
+typedef struct dimm_params_s {
+
+ /* DIMM organization parameters */
+ char mpart[19]; /* guaranteed null terminated */
+
+ unsigned int n_ranks;
+ unsigned long long rank_density;
+ unsigned long long capacity;
+ unsigned int data_width;
+ unsigned int primary_sdram_width;
+ unsigned int ec_sdram_width;
+ unsigned int registered_dimm;
+
+ /* SDRAM device parameters */
+ unsigned int n_row_addr;
+ unsigned int n_col_addr;
+ unsigned int edc_config; /* 0 = none, 1 = parity, 2 = ECC */
+ unsigned int n_banks_per_sdram_device;
+ unsigned int burst_lengths_bitmask; /* BL=4 bit 2, BL=8 = bit 3 */
+ unsigned int row_density;
+
+ /* used in computing base address of DIMMs */
+ unsigned long long base_address;
+
+ /* DIMM timing parameters */
+
+ /*
+ * SDRAM clock periods
+ * The range for these are 1000-10000 so a short should be sufficient
+ */
+ unsigned int tCKmin_X_ps;
+ unsigned int tCKmin_X_minus_1_ps;
+ unsigned int tCKmin_X_minus_2_ps;
+ unsigned int tCKmax_ps;
+
+ /* SPD-defined CAS latencies */
+ unsigned int caslat_X;
+ unsigned int caslat_X_minus_1;
+ unsigned int caslat_X_minus_2;
+
+ unsigned int caslat_lowest_derated; /* Derated CAS latency */
+
+ /* basic timing parameters */
+ unsigned int tRCD_ps;
+ unsigned int tRP_ps;
+ unsigned int tRAS_ps;
+
+ unsigned int tWR_ps; /* maximum = 63750 ps */
+ unsigned int tWTR_ps; /* maximum = 63750 ps */
+ unsigned int tRFC_ps; /* max = 255 ns + 256 ns + .75 ns
+ = 511750 ps */
+
+ unsigned int tRRD_ps; /* maximum = 63750 ps */
+ unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
+
+ unsigned int refresh_rate_ps;
+
+ unsigned int tIS_ps; /* byte 32, spd->ca_setup */
+ unsigned int tIH_ps; /* byte 33, spd->ca_hold */
+ unsigned int tDS_ps; /* byte 34, spd->data_setup */
+ unsigned int tDH_ps; /* byte 35, spd->data_hold */
+ unsigned int tRTP_ps; /* byte 38, spd->trtp */
+ unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
+ unsigned int tQHS_ps; /* byte 45, spd->tqhs */
+} dimm_params_t;
+
+extern unsigned int ddr_compute_dimm_parameters(
+ const generic_spd_eeprom_t *spd,
+ dimm_params_t *pdimm,
+ unsigned int dimm_number);
+
+#endif
diff --git a/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
new file mode 100644
index 0000000000..fbeb236d95
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -0,0 +1,404 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+/*
+ * compute_lowest_common_dimm_parameters()
+ *
+ * Determine the worst-case DIMM timing parameters from the set of DIMMs
+ * whose parameters have been computed into the array pointed to
+ * by dimm_params.
+ */
+unsigned int
+compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
+ common_timing_params_t *outpdimm,
+ unsigned int number_of_dimms)
+{
+ unsigned int i;
+
+ unsigned int tCKmin_X_ps = 0;
+ unsigned int tCKmax_ps = 0xFFFFFFFF;
+ unsigned int tCKmax_max_ps = 0;
+ unsigned int tRCD_ps = 0;
+ unsigned int tRP_ps = 0;
+ unsigned int tRAS_ps = 0;
+ unsigned int tWR_ps = 0;
+ unsigned int tWTR_ps = 0;
+ unsigned int tRFC_ps = 0;
+ unsigned int tRRD_ps = 0;
+ unsigned int tRC_ps = 0;
+ unsigned int refresh_rate_ps = 0;
+ unsigned int tIS_ps = 0;
+ unsigned int tIH_ps = 0;
+ unsigned int tDS_ps = 0;
+ unsigned int tDH_ps = 0;
+ unsigned int tRTP_ps = 0;
+ unsigned int tDQSQ_max_ps = 0;
+ unsigned int tQHS_ps = 0;
+
+ unsigned int temp1, temp2;
+ unsigned int lowest_good_caslat;
+ unsigned int additive_latency = 0;
+ const unsigned int mclk_ps = get_memory_clk_period_ps();
+ unsigned int not_ok;
+
+ debug("using mclk_ps = %u\n", mclk_ps);
+
+ temp1 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ /*
+ * If there are no ranks on this DIMM,
+ * it probably doesn't exist, so skip it.
+ */
+ if (dimm_params[i].n_ranks == 0) {
+ temp1++;
+ continue;
+ }
+
+ /*
+ * Find minimum tCKmax_ps to find fastest slow speed,
+ * i.e., this is the slowest the whole system can go.
+ */
+ tCKmax_ps = min(tCKmax_ps, dimm_params[i].tCKmax_ps);
+
+ /* Either find maximum value to determine slowest
+ * speed, delay, time, period, etc */
+ tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
+ tCKmax_max_ps = max(tCKmax_max_ps, dimm_params[i].tCKmax_ps);
+ tRCD_ps = max(tRCD_ps, dimm_params[i].tRCD_ps);
+ tRP_ps = max(tRP_ps, dimm_params[i].tRP_ps);
+ tRAS_ps = max(tRAS_ps, dimm_params[i].tRAS_ps);
+ tWR_ps = max(tWR_ps, dimm_params[i].tWR_ps);
+ tWTR_ps = max(tWTR_ps, dimm_params[i].tWTR_ps);
+ tRFC_ps = max(tRFC_ps, dimm_params[i].tRFC_ps);
+ tRRD_ps = max(tRRD_ps, dimm_params[i].tRRD_ps);
+ tRC_ps = max(tRC_ps, dimm_params[i].tRC_ps);
+ tIS_ps = max(tIS_ps, dimm_params[i].tIS_ps);
+ tIH_ps = max(tIH_ps, dimm_params[i].tIH_ps);
+ tDS_ps = max(tDS_ps, dimm_params[i].tDS_ps);
+ tDH_ps = max(tDH_ps, dimm_params[i].tDH_ps);
+ tRTP_ps = max(tRTP_ps, dimm_params[i].tRTP_ps);
+ tQHS_ps = max(tQHS_ps, dimm_params[i].tQHS_ps);
+ refresh_rate_ps = max(refresh_rate_ps,
+ dimm_params[i].refresh_rate_ps);
+
+ /*
+ * Find maximum tDQSQ_max_ps to find slowest.
+ *
+ * FIXME: is finding the slowest value the correct
+ * strategy for this parameter?
+ */
+ tDQSQ_max_ps = max(tDQSQ_max_ps, dimm_params[i].tDQSQ_max_ps);
+ }
+
+ outpdimm->ndimms_present = number_of_dimms - temp1;
+
+ if (temp1 == number_of_dimms) {
+ debug("no dimms this memory controller\n");
+ return 0;
+ }
+
+ outpdimm->tCKmin_X_ps = tCKmin_X_ps;
+ outpdimm->tCKmax_ps = tCKmax_ps;
+ outpdimm->tCKmax_max_ps = tCKmax_max_ps;
+ outpdimm->tRCD_ps = tRCD_ps;
+ outpdimm->tRP_ps = tRP_ps;
+ outpdimm->tRAS_ps = tRAS_ps;
+ outpdimm->tWR_ps = tWR_ps;
+ outpdimm->tWTR_ps = tWTR_ps;
+ outpdimm->tRFC_ps = tRFC_ps;
+ outpdimm->tRRD_ps = tRRD_ps;
+ outpdimm->tRC_ps = tRC_ps;
+ outpdimm->refresh_rate_ps = refresh_rate_ps;
+ outpdimm->tIS_ps = tIS_ps;
+ outpdimm->tIH_ps = tIH_ps;
+ outpdimm->tDS_ps = tDS_ps;
+ outpdimm->tDH_ps = tDH_ps;
+ outpdimm->tRTP_ps = tRTP_ps;
+ outpdimm->tDQSQ_max_ps = tDQSQ_max_ps;
+ outpdimm->tQHS_ps = tQHS_ps;
+
+ /* Determine common burst length for all DIMMs. */
+ temp1 = 0xff;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ temp1 &= dimm_params[i].burst_lengths_bitmask;
+ }
+ }
+ outpdimm->all_DIMMs_burst_lengths_bitmask = temp1;
+
+ /* Determine if all DIMMs registered buffered. */
+ temp1 = temp2 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ if (dimm_params[i].registered_dimm)
+ temp1 = 1;
+ if (!dimm_params[i].registered_dimm)
+ temp2 = 1;
+ }
+ }
+
+ outpdimm->all_DIMMs_registered = 0;
+ if (temp1 && !temp2) {
+ outpdimm->all_DIMMs_registered = 1;
+ }
+
+ outpdimm->all_DIMMs_unbuffered = 0;
+ if (!temp1 && temp2) {
+ outpdimm->all_DIMMs_unbuffered = 1;
+ }
+
+ /* CHECKME: */
+ if (!outpdimm->all_DIMMs_registered
+ && !outpdimm->all_DIMMs_unbuffered) {
+ printf("ERROR: Mix of registered buffered and unbuffered "
+ "DIMMs detected!\n");
+ }
+
+ /*
+ * Compute a CAS latency suitable for all DIMMs
+ *
+ * Strategy for SPD-defined latencies: compute only
+ * CAS latency defined by all DIMMs.
+ */
+
+ /*
+ * Step 1: find CAS latency common to all DIMMs using bitwise
+ * operation.
+ */
+ temp1 = 0xFF;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks) {
+ temp2 = 0;
+ temp2 |= 1 << dimm_params[i].caslat_X;
+ temp2 |= 1 << dimm_params[i].caslat_X_minus_1;
+ temp2 |= 1 << dimm_params[i].caslat_X_minus_2;
+ /*
+ * FIXME: If there was no entry for X-2 (X-1) in
+ * the SPD, then caslat_X_minus_2
+ * (caslat_X_minus_1) contains either 255 or
+ * 0xFFFFFFFF because that's what the glorious
+ * __ilog2 function returns for an input of 0.
+ * On 32-bit PowerPC, left shift counts with bit
+ * 26 set (that the value of 255 or 0xFFFFFFFF
+ * will have), cause the destination register to
+ * be 0. That is why this works.
+ */
+ temp1 &= temp2;
+ }
+ }
+
+ /*
+ * Step 2: check each common CAS latency against tCK of each
+ * DIMM's SPD.
+ */
+ lowest_good_caslat = 0;
+ temp2 = 0;
+ while (temp1) {
+ not_ok = 0;
+ temp2 = __ilog2(temp1);
+ debug("checking common caslat = %u\n", temp2);
+
+ /* Check if this CAS latency will work on all DIMMs at tCK. */
+ for (i = 0; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks) {
+ continue;
+ }
+ if (dimm_params[i].caslat_X == temp2) {
+ if (mclk_ps >= dimm_params[i].tCKmin_X_ps) {
+ debug("CL = %u ok on DIMM %u at tCK=%u"
+ " ps with its tCKmin_X_ps of %u\n",
+ temp2, i, mclk_ps,
+ dimm_params[i].tCKmin_X_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+
+ if (dimm_params[i].caslat_X_minus_1 == temp2) {
+ unsigned int tCKmin_X_minus_1_ps
+ = dimm_params[i].tCKmin_X_minus_1_ps;
+ if (mclk_ps >= tCKmin_X_minus_1_ps) {
+ debug("CL = %u ok on DIMM %u at "
+ "tCK=%u ps with its "
+ "tCKmin_X_minus_1_ps of %u\n",
+ temp2, i, mclk_ps,
+ tCKmin_X_minus_1_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+
+ if (dimm_params[i].caslat_X_minus_2 == temp2) {
+ unsigned int tCKmin_X_minus_2_ps
+ = dimm_params[i].tCKmin_X_minus_2_ps;
+ if (mclk_ps >= tCKmin_X_minus_2_ps) {
+ debug("CL = %u ok on DIMM %u at "
+ "tCK=%u ps with its "
+ "tCKmin_X_minus_2_ps of %u\n",
+ temp2, i, mclk_ps,
+ tCKmin_X_minus_2_ps);
+ continue;
+ } else {
+ not_ok++;
+ }
+ }
+ }
+
+ if (!not_ok) {
+ lowest_good_caslat = temp2;
+ }
+
+ temp1 &= ~(1 << temp2);
+ }
+
+ debug("lowest common SPD-defined CAS latency = %u\n",
+ lowest_good_caslat);
+ outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
+
+
+ /*
+ * Compute a common 'de-rated' CAS latency.
+ *
+ * The strategy here is to find the *highest* dereated cas latency
+ * with the assumption that all of the DIMMs will support a dereated
+ * CAS latency higher than or equal to their lowest dereated value.
+ */
+ temp1 = 0;
+ for (i = 0; i < number_of_dimms; i++) {
+ temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
+ }
+ outpdimm->highest_common_derated_caslat = temp1;
+ debug("highest common dereated CAS latency = %u\n", temp1);
+
+ /* Determine if all DIMMs ECC capable. */
+ temp1 = 1;
+ for (i = 0; i < number_of_dimms; i++) {
+ if (dimm_params[i].n_ranks && dimm_params[i].edc_config != 2) {
+ temp1 = 0;
+ break;
+ }
+ }
+ if (temp1) {
+ debug("all DIMMs ECC capable\n");
+ } else {
+ debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
+ }
+ outpdimm->all_DIMMs_ECC_capable = temp1;
+
+
+ /* FIXME: move to somewhere else to validate. */
+ if (mclk_ps > tCKmax_max_ps) {
+ printf("Warning: some of the installed DIMMs "
+ "can not operate this slowly.\n");
+ return 1;
+ }
+
+ /*
+ * Compute additive latency.
+ *
+ * For DDR1, additive latency should be 0.
+ *
+ * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
+ * which comes from Trcd, and also note that:
+ * add_lat + caslat must be >= 4
+ *
+ * For DDR3, FIXME additive latency determination
+ *
+ * When to use additive latency for DDR2:
+ *
+ * I. Because you are using CL=3 and need to do ODT on writes and
+ * want functionality.
+ * 1. Are you going to use ODT? (Does your board not have
+ * additional termination circuitry for DQ, DQS, DQS_,
+ * DM, RDQS, RDQS_ for x4/x8 configs?)
+ * 2. If so, is your lowest supported CL going to be 3?
+ * 3. If so, then you must set AL=1 because
+ *
+ * WL >= 3 for ODT on writes
+ * RL = AL + CL
+ * WL = RL - 1
+ * ->
+ * WL = AL + CL - 1
+ * AL + CL - 1 >= 3
+ * AL + CL >= 4
+ * QED
+ *
+ * RL >= 3 for ODT on reads
+ * RL = AL + CL
+ *
+ * Since CL aren't usually less than 2, AL=0 is a minimum,
+ * so the WL-derived AL should be the -- FIXME?
+ *
+ * II. Because you are using auto-precharge globally and want to
+ * use additive latency (posted CAS) to get more bandwidth.
+ * 1. Are you going to use auto-precharge mode globally?
+ *
+ * Use addtivie latency and compute AL to be 1 cycle less than
+ * tRCD, i.e. the READ or WRITE command is in the cycle
+ * immediately following the ACTIVATE command..
+ *
+ * III. Because you feel like it or want to do some sort of
+ * degraded-performance experiment.
+ * 1. Do you just want to use additive latency because you feel
+ * like it?
+ *
+ * Validation: AL is less than tRCD, and within the other
+ * read-to-precharge constraints.
+ */
+
+ additive_latency = 0;
+
+#if defined(CONFIG_FSL_DDR2)
+ if (lowest_good_caslat < 4) {
+ additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
+ if (mclk_to_picos(additive_latency) > tRCD_ps) {
+ additive_latency = picos_to_mclk(tRCD_ps);
+ debug("setting additive_latency to %u because it was "
+ " greater than tRCD_ps\n", additive_latency);
+ }
+ }
+
+#elif defined(CONFIG_FSL_DDR3)
+error "FIXME determine additive latency for DDR3"
+#endif
+
+ /*
+ * Validate additive latency
+ * FIXME: move to somewhere else to validate
+ *
+ * AL <= tRCD(min)
+ */
+ if (mclk_to_picos(additive_latency) > tRCD_ps) {
+ printf("Error: invalid additive latency exceeds tRCD(min).\n");
+ return 1;
+ }
+
+ /*
+ * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
+ * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
+ * ADD_LAT (the register) must be set to a value less
+ * than ACTTORW if WL = 1, then AL must be set to 1
+ * RD_TO_PRE (the register) must be set to a minimum
+ * tRTP + AL if AL is nonzero
+ */
+
+ /*
+ * Additive latency will be applied only if the memctl option to
+ * use it.
+ */
+ outpdimm->additive_latency = additive_latency;
+
+ return 0;
+}
diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c
new file mode 100644
index 0000000000..ac4b80c3ac
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/main.c
@@ -0,0 +1,473 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+/*
+ * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
+ * Based on code from spd_sdram.c
+ * Author: James Yang [at freescale.com]
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+extern void fsl_ddr_set_lawbar(
+ const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num);
+
+/* processor specific function */
+extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+ unsigned int ctrl_num);
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+ unsigned int ctrl_num);
+
+/*
+ * ASSUMPTIONS:
+ * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
+ * - Same memory data bus width on all controllers
+ *
+ * NOTES:
+ *
+ * The memory controller and associated documentation use confusing
+ * terminology when referring to the orgranization of DRAM.
+ *
+ * Here is a terminology translation table:
+ *
+ * memory controller/documention |industry |this code |signals
+ * -------------------------------|-----------|-----------|-----------------
+ * physical bank/bank |rank |rank |chip select (CS)
+ * logical bank/sub-bank |bank |bank |bank address (BA)
+ * page/row |row |page |row address
+ * ??? |column |column |column address
+ *
+ * The naming confusion is further exacerbated by the descriptions of the
+ * memory controller interleaving feature, where accesses are interleaved
+ * _BETWEEN_ two seperate memory controllers. This is configured only in
+ * CS0_CONFIG[INTLV_CTL] of each memory controller.
+ *
+ * memory controller documentation | number of chip selects
+ * | per memory controller supported
+ * --------------------------------|-----------------------------------------
+ * cache line interleaving | 1 (CS0 only)
+ * page interleaving | 1 (CS0 only)
+ * bank interleaving | 1 (CS0 only)
+ * superbank interleraving | depends on bank (chip select)
+ * | interleraving [rank interleaving]
+ * | mode used on every memory controller
+ *
+ * Even further confusing is the existence of the interleaving feature
+ * _WITHIN_ each memory controller. The feature is referred to in
+ * documentation as chip select interleaving or bank interleaving,
+ * although it is configured in the DDR_SDRAM_CFG field.
+ *
+ * Name of field | documentation name | this code
+ * -----------------------------|-----------------------|------------------
+ * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving
+ * | interleaving
+ */
+
+#ifdef DEBUG
+const char *step_string_tbl[] = {
+ "STEP_GET_SPD",
+ "STEP_COMPUTE_DIMM_PARMS",
+ "STEP_COMPUTE_COMMON_PARMS",
+ "STEP_GATHER_OPTS",
+ "STEP_ASSIGN_ADDRESSES",
+ "STEP_COMPUTE_REGS",
+ "STEP_PROGRAM_REGS",
+ "STEP_ALL"
+};
+
+const char * step_to_string(unsigned int step) {
+
+ unsigned int s = __ilog2(step);
+
+ if ((1 << s) != step)
+ return step_string_tbl[7];
+
+ return step_string_tbl[s];
+}
+#endif
+
+int step_assign_addresses(fsl_ddr_info_t *pinfo,
+ unsigned int dbw_cap_adj[],
+ unsigned int *memctl_interleaving,
+ unsigned int *rank_interleaving)
+{
+ int i, j;
+
+ /*
+ * If a reduced data width is requested, but the SPD
+ * specifies a physically wider device, adjust the
+ * computed dimm capacities accordingly before
+ * assigning addresses.
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ unsigned int found = 0;
+
+ switch (pinfo->memctl_opts[i].data_bus_width) {
+ case 2:
+ /* 16-bit */
+ printf("can't handle 16-bit mode yet\n");
+ break;
+
+ case 1:
+ /* 32-bit */
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned int dw;
+ dw = pinfo->dimm_params[i][j].data_width;
+ if (pinfo->dimm_params[i][j].n_ranks
+ && (dw == 72 || dw == 64)) {
+ /*
+ * FIXME: can't really do it
+ * like this because this just
+ * further reduces the memory
+ */
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbw_cap_adj[i] = 1;
+ }
+ break;
+
+ case 0:
+ /* 64-bit */
+ break;
+
+ default:
+ printf("unexpected data bus width "
+ "specified controller %u\n", i);
+ return 1;
+ }
+ }
+
+ /*
+ * Check if all controllers are configured for memory
+ * controller interleaving.
+ */
+ j = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (pinfo->memctl_opts[i].memctl_interleaving) {
+ j++;
+ }
+ }
+ if (j == 2) {
+ *memctl_interleaving = 1;
+ }
+
+ /* Check that all controllers are rank interleaving. */
+ j = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (pinfo->memctl_opts[i].ba_intlv_ctl) {
+ j++;
+ }
+ }
+ if (j == 2) {
+ *rank_interleaving = 1;
+ }
+
+ if (*memctl_interleaving) {
+ phys_addr_t addr;
+
+ /*
+ * If interleaving between memory controllers,
+ * make each controller start at a base address
+ * of 0.
+ *
+ * Also, if bank interleaving (chip select
+ * interleaving) is enabled on each memory
+ * controller, CS0 needs to be programmed to
+ * cover the entire memory range on that memory
+ * controller
+ *
+ * Bank interleaving also implies that each
+ * addressed chip select is identical in size.
+ */
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ addr = 0;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned long long cap
+ = pinfo->dimm_params[i][j].capacity;
+
+ pinfo->dimm_params[i][j].base_address = addr;
+ addr += (phys_addr_t)(cap >> dbw_cap_adj[i]);
+ }
+ }
+ } else {
+ /*
+ * Simple linear assignment if memory
+ * controllers are not interleaved.
+ */
+ phys_size_t cur_memsize = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ phys_size_t total_mem_per_ctlr = 0;
+ pinfo->common_timing_params[i].base_address =
+ (phys_addr_t)cur_memsize;
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ /* Compute DIMM base addresses. */
+ unsigned long long cap =
+ pinfo->dimm_params[i][j].capacity;
+
+ pinfo->dimm_params[i][j].base_address =
+ (phys_addr_t)cur_memsize;
+ cur_memsize += cap >> dbw_cap_adj[i];
+ total_mem_per_ctlr += cap >> dbw_cap_adj[i];
+ }
+ pinfo->common_timing_params[i].total_mem =
+ total_mem_per_ctlr;
+ }
+ }
+
+ return 0;
+}
+
+phys_size_t
+fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
+{
+ unsigned int i, j;
+ unsigned int all_controllers_memctl_interleaving = 0;
+ unsigned int all_controllers_rank_interleaving = 0;
+ phys_size_t total_mem = 0;
+
+ fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
+ common_timing_params_t *timing_params = pinfo->common_timing_params;
+
+ /* data bus width capacity adjust shift amount */
+ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ dbw_capacity_adjust[i] = 0;
+ }
+
+ debug("starting at step %u (%s)\n",
+ start_step, step_to_string(start_step));
+
+ switch (start_step) {
+ case STEP_GET_SPD:
+ /* STEP 1: Gather all DIMM SPD data */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
+ }
+
+ case STEP_COMPUTE_DIMM_PARMS:
+ /* STEP 2: Compute DIMM parameters from SPD data */
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
+ unsigned int retval;
+ generic_spd_eeprom_t *spd =
+ &(pinfo->spd_installed_dimms[i][j]);
+ dimm_params_t *pdimm =
+ &(pinfo->dimm_params[i][j]);
+
+ retval = compute_dimm_parameters(spd, pdimm, i);
+ if (retval == 2) {
+ printf("Error: compute_dimm_parameters"
+ " non-zero returned FATAL value "
+ "for memctl=%u dimm=%u\n", i, j);
+ return 0;
+ }
+ if (retval) {
+ debug("Warning: compute_dimm_parameters"
+ " non-zero return value for memctl=%u "
+ "dimm=%u\n", i, j);
+ }
+ }
+ }
+
+ case STEP_COMPUTE_COMMON_PARMS:
+ /*
+ * STEP 3: Compute a common set of timing parameters
+ * suitable for all of the DIMMs on each memory controller
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Computing lowest common DIMM"
+ " parameters for memctl=%u\n", i);
+ compute_lowest_common_dimm_parameters(
+ pinfo->dimm_params[i],
+ &timing_params[i],
+ CONFIG_DIMM_SLOTS_PER_CTLR);
+ }
+
+ case STEP_GATHER_OPTS:
+ /* STEP 4: Gather configuration requirements from user */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Reloading memory controller "
+ "configuration options for memctl=%u\n", i);
+ /*
+ * This "reloads" the memory controller options
+ * to defaults. If the user "edits" an option,
+ * next_step points to the step after this,
+ * which is currently STEP_ASSIGN_ADDRESSES.
+ */
+ populate_memctl_options(
+ timing_params[i].all_DIMMs_registered,
+ &pinfo->memctl_opts[i], i);
+ }
+
+ case STEP_ASSIGN_ADDRESSES:
+ /* STEP 5: Assign addresses to chip selects */
+ step_assign_addresses(pinfo,
+ dbw_capacity_adjust,
+ &all_controllers_memctl_interleaving,
+ &all_controllers_rank_interleaving);
+
+ case STEP_COMPUTE_REGS:
+ /* STEP 6: compute controller register values */
+ debug("FSL Memory ctrl cg register computation\n");
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ if (timing_params[i].ndimms_present == 0) {
+ memset(&ddr_reg[i], 0,
+ sizeof(fsl_ddr_cfg_regs_t));
+ continue;
+ }
+
+ compute_fsl_memctl_config_regs(
+ &pinfo->memctl_opts[i],
+ &ddr_reg[i], &timing_params[i],
+ pinfo->dimm_params[i],
+ dbw_capacity_adjust[i]);
+ }
+
+ default:
+ break;
+ }
+
+ /* Compute the total amount of memory. */
+
+ /*
+ * If bank interleaving but NOT memory controller interleaving
+ * CS_BNDS describe the quantity of memory on each memory
+ * controller, so the total is the sum across.
+ */
+ if (!all_controllers_memctl_interleaving
+ && all_controllers_rank_interleaving) {
+ total_mem = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ total_mem += timing_params[i].total_mem;
+ }
+
+ } else {
+ /*
+ * Compute the amount of memory available just by
+ * looking for the highest valid CSn_BNDS value.
+ * This allows us to also experiment with using
+ * only CS0 when using dual-rank DIMMs.
+ */
+ unsigned int max_end = 0;
+
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
+ fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
+ if (reg->cs[j].config & 0x80000000) {
+ unsigned int end;
+ end = reg->cs[j].bnds & 0xFFF;
+ if (end > max_end) {
+ max_end = end;
+ }
+ }
+ }
+ }
+
+#if !defined(CONFIG_PHYS_64BIT)
+ /* Check for 4G or more with a 32-bit phys_addr_t. Bad. */
+ if (max_end >= 0xff) {
+ printf("This U-Boot only supports < 4G of DDR\n");
+ printf("You could rebuild it with CONFIG_PHYS_64BIT\n");
+ return 0; /* Ensure DDR setup failure. */
+ }
+#endif
+
+ total_mem = 1 + (((unsigned long long)max_end << 24ULL)
+ | 0xFFFFFFULL);
+ }
+
+ return total_mem;
+}
+
+/*
+ * fsl_ddr_sdram() -- this is the main function to be called by
+ * initdram() in the board file.
+ *
+ * It returns amount of memory configured in bytes.
+ */
+phys_size_t fsl_ddr_sdram(void)
+{
+ unsigned int i;
+ unsigned int memctl_interleaved;
+ phys_size_t total_memory;
+ fsl_ddr_info_t info;
+
+ /* Reset info structure. */
+ memset(&info, 0, sizeof(fsl_ddr_info_t));
+
+ /* Compute it once normally. */
+ total_memory = fsl_ddr_compute(&info, STEP_GET_SPD);
+
+ /* Check for memory controller interleaving. */
+ memctl_interleaved = 0;
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ memctl_interleaved +=
+ info.memctl_opts[i].memctl_interleaving;
+ }
+
+ if (memctl_interleaved) {
+ if (memctl_interleaved == CONFIG_NUM_DDR_CONTROLLERS) {
+ debug("memctl interleaving\n");
+ /*
+ * Change the meaning of memctl_interleaved
+ * to be "boolean".
+ */
+ memctl_interleaved = 1;
+ } else {
+ printf("Error: memctl interleaving not "
+ "properly configured on all controllers\n");
+ while (1);
+ }
+ }
+
+ /* Program configuration registers. */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ debug("Programming controller %u\n", i);
+ if (info.common_timing_params[i].ndimms_present == 0) {
+ debug("No dimms present on controller %u; "
+ "skipping programming\n", i);
+ continue;
+ }
+
+ fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i);
+ }
+
+ if (memctl_interleaved) {
+ const unsigned int ctrl_num = 0;
+
+ /* Only set LAWBAR1 if memory controller interleaving is on. */
+ fsl_ddr_set_lawbar(&info.common_timing_params[0],
+ memctl_interleaved, ctrl_num);
+ } else {
+ /*
+ * Memory controller interleaving is NOT on;
+ * set each lawbar individually.
+ */
+ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
+ fsl_ddr_set_lawbar(&info.common_timing_params[i],
+ 0, i);
+ }
+ }
+
+ debug("total_memory = %llu\n", (u64)total_memory);
+
+ return total_memory;
+}
diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c
new file mode 100644
index 0000000000..6c2b43c0c5
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/options.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+#include "ddr.h"
+
+/* Board-specific functions defined in each board's ddr.c */
+extern void fsl_ddr_board_options(memctl_options_t *popts,
+ unsigned int ctrl_num);
+
+unsigned int populate_memctl_options(int all_DIMMs_registered,
+ memctl_options_t *popts,
+ unsigned int ctrl_num)
+{
+ unsigned int i;
+
+ /* Chip select options. */
+
+ /* Pick chip-select local options. */
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ /* If not DDR2, odt_rd_cfg and odt_wr_cfg need to be 0. */
+
+ /* only for single CS? */
+ popts->cs_local_opts[i].odt_rd_cfg = 0;
+
+ popts->cs_local_opts[i].odt_wr_cfg = 1;
+ popts->cs_local_opts[i].auto_precharge = 0;
+ }
+
+ /* Pick interleaving mode. */
+
+ /*
+ * 0 = no interleaving
+ * 1 = interleaving between 2 controllers
+ */
+ popts->memctl_interleaving = 0;
+
+ /*
+ * 0 = cacheline
+ * 1 = page
+ * 2 = (logical) bank
+ * 3 = superbank (only if CS interleaving is enabled)
+ */
+ popts->memctl_interleaving_mode = 0;
+
+ /*
+ * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
+ * 1: page: bit to the left of the column bits selects the memctl
+ * 2: bank: bit to the left of the bank bits selects the memctl
+ * 3: superbank: bit to the left of the chip select selects the memctl
+ *
+ * NOTE: ba_intlv (rank interleaving) is independent of memory
+ * controller interleaving; it is only within a memory controller.
+ * Must use superbank interleaving if rank interleaving is used and
+ * memory controller interleaving is enabled.
+ */
+
+ /*
+ * 0 = no
+ * 0x40 = CS0,CS1
+ * 0x20 = CS2,CS3
+ * 0x60 = CS0,CS1 + CS2,CS3
+ * 0x04 = CS0,CS1,CS2,CS3
+ */
+ popts->ba_intlv_ctl = 0;
+
+ /* Memory Organization Parameters */
+ popts->registered_dimm_en = all_DIMMs_registered;
+
+ /* Operational Mode Paramters */
+
+ /* Pick ECC modes */
+#ifdef CONFIG_DDR_ECC
+ popts->ECC_mode = 1; /* 0 = disabled, 1 = enabled */
+#else
+ popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */
+#endif
+ popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
+
+ /*
+ * Choose DQS config
+ * 0 for DDR1
+ * 1 for DDR2
+ */
+#if defined(CONFIG_FSL_DDR1)
+ popts->DQS_config = 0;
+#elif defined(CONFIG_FSL_DDR2)
+ popts->DQS_config = 1;
+#else
+#error "Fix DQS for DDR3"
+#endif
+
+ /* Choose self-refresh during sleep. */
+ popts->self_refresh_in_sleep = 1;
+
+ /* Choose dynamic power management mode. */
+ popts->dynamic_power = 0;
+
+ /* 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */
+ popts->data_bus_width = 0;
+
+ /* Choose burst length. */
+ popts->burst_length = 4; /* has to be 4 for DDR2 */
+
+ /* Global Timing Parameters. */
+ debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
+
+ /* Pick a caslat override. */
+ popts->cas_latency_override = 0;
+ popts->cas_latency_override_value = 3;
+ if (popts->cas_latency_override) {
+ debug("using caslat override value = %u\n",
+ popts->cas_latency_override_value);
+ }
+
+ /* Decide whether to use the computed derated latency */
+ popts->use_derated_caslat = 0;
+
+ /* Choose an additive latency. */
+ popts->additive_latency_override = 0;
+ popts->additive_latency_override_value = 3;
+ if (popts->additive_latency_override) {
+ debug("using additive latency override value = %u\n",
+ popts->additive_latency_override_value);
+ }
+
+ /*
+ * 2T_EN setting
+ *
+ * Factors to consider for 2T_EN:
+ * - number of DIMMs installed
+ * - number of components, number of active ranks
+ * - how much time you want to spend playing around
+ */
+ popts->twoT_en = 1;
+ popts->threeT_en = 0;
+
+ /*
+ * BSTTOPRE precharge interval
+ *
+ * Set this to 0 for global auto precharge
+ *
+ * FIXME: Should this be configured in picoseconds?
+ * Why it should be in ps: better understanding of this
+ * relative to actual DRAM timing parameters such as tRAS.
+ * e.g. tRAS(min) = 40 ns
+ */
+ popts->bstopre = 0x100;
+
+ /* Minimum CKE pulse width -- tCKE(MIN) */
+ popts->tCKE_clock_pulse_width_ps
+ = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
+
+ /*
+ * Window for four activates -- tFAW
+ *
+ * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
+ * FIXME: varies depending upon number of column addresses or data
+ * FIXME: width, was considering looking at pdimm->primary_sdram_width
+ */
+#if defined(CONFIG_FSL_DDR1)
+ popts->tFAW_window_four_activates_ps = mclk_to_picos(1);
+
+#elif defined(CONFIG_FSL_DDR2)
+ /*
+ * x4/x8; some datasheets have 35000
+ * x16 wide columns only? Use 50000?
+ */
+ popts->tFAW_window_four_activates_ps = 37500;
+
+#elif defined(CONFIG_FSL_DDR3)
+#error "FIXME determine four activates for DDR3"
+#endif
+
+ /* ODT should only be used for DDR2 */
+
+ /* FIXME? */
+
+ /*
+ * Interleaving checks.
+ *
+ * If memory controller interleaving is enabled, then the data
+ * bus widths must be programmed identically for the 2 memory
+ * controllers.
+ */
+
+ fsl_ddr_board_options(popts, ctrl_num);
+
+ return 0;
+}
diff --git a/cpu/mpc8xxx/ddr/util.c b/cpu/mpc8xxx/ddr/util.c
new file mode 100644
index 0000000000..27c135b112
--- /dev/null
+++ b/cpu/mpc8xxx/ddr/util.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+
+#include "ddr.h"
+
+unsigned int fsl_ddr_get_mem_data_rate(void);
+
+/*
+ * Round mclk_ps to nearest 10 ps in memory controller code.
+ *
+ * If an imprecise data rate is too high due to rounding error
+ * propagation, compute a suitably rounded mclk_ps to compute
+ * a working memory controller configuration.
+ */
+unsigned int get_memory_clk_period_ps(void)
+{
+ unsigned int mclk_ps;
+
+ mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate();
+ /* round to nearest 10 ps */
+ return 10 * ((mclk_ps + 5) / 10);
+}
+
+/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
+unsigned int picos_to_mclk(unsigned int picos)
+{
+ const unsigned long long ULL_2e12 = 2000000000000ULL;
+ const unsigned long long ULL_8Fs = 0xFFFFFFFFULL;
+ unsigned long long clks;
+ unsigned long long clks_temp;
+
+ if (!picos)
+ return 0;
+
+ clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos;
+ clks_temp = clks;
+ clks = clks / ULL_2e12;
+ if (clks_temp % ULL_2e12) {
+ clks++;
+ }
+
+ if (clks > ULL_8Fs) {
+ clks = ULL_8Fs;
+ }
+
+ return (unsigned int) clks;
+}
+
+unsigned int mclk_to_picos(unsigned int mclk)
+{
+ return get_memory_clk_period_ps() * mclk;
+}
+
+void
+__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num)
+{
+ /*
+ * If no DIMMs on this controller, do not proceed any further.
+ */
+ if (!memctl_common_params->ndimms_present) {
+ return;
+ }
+
+ if (ctrl_num == 0) {
+ /*
+ * Set up LAW for DDR controller 1 space.
+ */
+ unsigned int lawbar1_target_id = memctl_interleaved
+ ? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
+
+ if (set_ddr_laws(memctl_common_params->base_address,
+ memctl_common_params->total_mem,
+ lawbar1_target_id) < 0) {
+ printf("ERROR\n");
+ return ;
+ }
+ } else if (ctrl_num == 1) {
+ if (set_ddr_laws(memctl_common_params->base_address,
+ memctl_common_params->total_mem,
+ LAW_TRGT_IF_DDR_2) < 0) {
+ printf("ERROR\n");
+ return ;
+ }
+ } else {
+ printf("unexpected controller number %u in %s\n",
+ ctrl_num, __FUNCTION__);
+ }
+}
+
+__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
+fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
+ unsigned int memctl_interleaved,
+ unsigned int ctrl_num);
diff --git a/include/asm-ppc/fsl_ddr_sdram.h b/include/asm-ppc/fsl_ddr_sdram.h
new file mode 100644
index 0000000000..8adde34247
--- /dev/null
+++ b/include/asm-ppc/fsl_ddr_sdram.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef FSL_DDR_MEMCTL_H
+#define FSL_DDR_MEMCTL_H
+
+/*
+ * Pick a basic DDR Technology.
+ */
+#include <ddr_spd.h>
+
+#define SDRAM_TYPE_DDR1 2
+#define SDRAM_TYPE_DDR2 3
+#define SDRAM_TYPE_LPDDR1 6
+#define SDRAM_TYPE_DDR3 7
+
+#if defined(CONFIG_FSL_DDR1)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
+typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1
+#endif
+#elif defined(CONFIG_FSL_DDR2)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3)
+typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
+#ifndef CONFIG_FSL_SDRAM_TYPE
+#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2
+#endif
+#elif defined(CONFIG_FSL_DDR3)
+#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */
+typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
+#endif
+
+/* Record of register values computed */
+typedef struct fsl_ddr_cfg_regs_s {
+ struct {
+ unsigned int bnds;
+ unsigned int config;
+ unsigned int config_2;
+ } cs[CONFIG_CHIP_SELECTS_PER_CTRL];
+ unsigned int timing_cfg_3;
+ unsigned int timing_cfg_0;
+ unsigned int timing_cfg_1;
+ unsigned int timing_cfg_2;
+ unsigned int ddr_sdram_cfg;
+ unsigned int ddr_sdram_cfg_2;
+ unsigned int ddr_sdram_mode;
+ unsigned int ddr_sdram_mode_2;
+ unsigned int ddr_sdram_md_cntl;
+ unsigned int ddr_sdram_interval;
+ unsigned int ddr_data_init;
+ unsigned int ddr_sdram_clk_cntl;
+ unsigned int ddr_init_addr;
+ unsigned int ddr_init_ext_addr;
+ unsigned int timing_cfg_4;
+ unsigned int timing_cfg_5;
+ unsigned int ddr_zq_cntl;
+ unsigned int ddr_wrlvl_cntl;
+ unsigned int ddr_pd_cntl;
+ unsigned int ddr_sr_cntr;
+ unsigned int ddr_sdram_rcw_1;
+ unsigned int ddr_sdram_rcw_2;
+} fsl_ddr_cfg_regs_t;
+
+typedef struct memctl_options_partial_s {
+ unsigned int all_DIMMs_ECC_capable;
+ unsigned int all_DIMMs_tCKmax_ps;
+ unsigned int all_DIMMs_burst_lengths_bitmask;
+ unsigned int all_DIMMs_registered;
+ unsigned int all_DIMMs_unbuffered;
+ /* unsigned int lowest_common_SPD_caslat; */
+ unsigned int all_DIMMs_minimum_tRCD_ps;
+} memctl_options_partial_t;
+
+/*
+ * Generalized parameters for memory controller configuration,
+ * might be a little specific to the FSL memory controller
+ */
+typedef struct memctl_options_s {
+ /*
+ * Memory organization parameters
+ *
+ * if DIMM is present in the system
+ * where DIMMs are with respect to chip select
+ * where chip selects are with respect to memory boundaries
+ */
+ unsigned int registered_dimm_en; /* use registered DIMM support */
+
+ /* Options local to a Chip Select */
+ struct cs_local_opts_s {
+ unsigned int auto_precharge;
+ unsigned int odt_rd_cfg;
+ unsigned int odt_wr_cfg;
+ } cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];
+
+ /* Special configurations for chip select */
+ unsigned int memctl_interleaving;
+ unsigned int memctl_interleaving_mode;
+ unsigned int ba_intlv_ctl;
+
+ /* Operational mode parameters */
+ unsigned int ECC_mode; /* Use ECC? */
+ /* Initialize ECC using memory controller? */
+ unsigned int ECC_init_using_memctl;
+ unsigned int DQS_config; /* Use DQS? maybe only with DDR2? */
+ /* SREN - self-refresh during sleep */
+ unsigned int self_refresh_in_sleep;
+ unsigned int dynamic_power; /* DYN_PWR */
+ /* memory data width to use (16-bit, 32-bit, 64-bit) */
+ unsigned int data_bus_width;
+ unsigned int burst_length; /* 4, 8 */
+
+ /* Global Timing Parameters */
+ unsigned int cas_latency_override;
+ unsigned int cas_latency_override_value;
+ unsigned int use_derated_caslat;
+ unsigned int additive_latency_override;
+ unsigned int additive_latency_override_value;
+
+ unsigned int clk_adjust; /* */
+ unsigned int cpo_override;
+ unsigned int write_data_delay; /* DQS adjust */
+ unsigned int half_strength_driver_enable;
+ unsigned int twoT_en;
+ unsigned int threeT_en;
+ unsigned int bstopre;
+ unsigned int tCKE_clock_pulse_width_ps; /* tCKE */
+ unsigned int tFAW_window_four_activates_ps; /* tFAW -- FOUR_ACT */
+} memctl_options_t;
+
+extern phys_size_t fsl_ddr_sdram(void);
+#endif