summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG19
-rw-r--r--Makefile2
-rw-r--r--README8
-rw-r--r--common/miiphyutil.c23
-rw-r--r--cpu/mpc824x/speed.c4
-rw-r--r--cpu/pxa/interrupts.c20
-rw-r--r--drivers/s3c24x0_i2c.c530
-rw-r--r--include/miiphy.h3
-rw-r--r--net/net.c28
9 files changed, 368 insertions, 269 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 9244e64e569..54d6e886268 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,25 @@
Changes for U-Boot 1.0.0:
======================================================================
+* Patch by Sangmoon Kim, 23 Sep 2003:
+ fix pll_pci_to_mem_multiplier table for MPC8245
+
+* Patch by Anders Larsen, 22 Sep 2003:
+ enable timed autoboot on PXA
+
+* Patch by David Müller, 22 Sep 2003:
+
+ - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+ returns correct libgcc file path
+ - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+ time on s3c24x0 systems
+
+* Patch by Jon Diekema, 19 Sep 2003:
+ - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+ link state to the fault LED.
+ - In NetLoop, make the Fault LED reflect the link status. The link
+ status gets updated on entry, and on timeouts.
+
* Patch by Anders Larsen, 18 Sep 2003:
allow mkimage to build and run on Cygwin-hosted systems
diff --git a/Makefile b/Makefile
index 80dc424d72e..6d006bffaf7 100644
--- a/Makefile
+++ b/Makefile
@@ -118,7 +118,7 @@ LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
LIBS += lib_generic/libgeneric.a
# Add GCC lib
-PLATFORM_LIBS += -L $(shell dirname `$(CC) -print-libgcc-file-name`) -lgcc
+PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
#########################################################################
#########################################################################
diff --git a/README b/README
index 1471cb5dee6..9049f3a0727 100644
--- a/README
+++ b/README
@@ -1749,6 +1749,14 @@ Note: once the monitor has been relocated, then it will complain if
the default environment is used; a new CRC is computed as soon as you
use the "saveenv" command to store a valid environment.
+- CFG_FAULT_ECHO_LINK_DOWN:
+ Echo the inverted Ethernet link state to the fault LED.
+
+ Note: If this option is active, then CFG_FAULT_MII_ADDR
+ also needs to be defined.
+
+- CFG_FAULT_MII_ADDR:
+ MII address of the PHY to check for the Ethernet link state.
Low Level (hardware related) configuration options:
---------------------------------------------------
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index 6b2425f660f..75c2df5caed 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -169,4 +169,27 @@ int miiphy_duplex (unsigned char addr)
}
}
+#ifdef CFG_FAULT_ECHO_LINK_DOWN
+/*****************************************************************************
+ *
+ * Determine link status
+ */
+int miiphy_link (unsigned char addr)
+{
+ unsigned short reg;
+
+ if (miiphy_read (addr, PHY_BMSR, &reg)) {
+ printf ("PHY_BMSR read failed, assuming no link\n");
+ return (0);
+ }
+
+ /* Determine if a link is active */
+ if ((reg & PHY_BMSR_LS) != 0) {
+ return (1);
+ } else {
+ return (0);
+ }
+}
+#endif
+
#endif /* CONFIG_MII || (CONFIG_COMMANDS & CFG_CMD_MII) */
diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c
index bd3156d2552..a37a087af12 100644
--- a/cpu/mpc824x/speed.c
+++ b/cpu/mpc824x/speed.c
@@ -61,8 +61,8 @@ short pll_pci_to_mem_multiplier[] = {
25, 0, 10, 0, 15, 15, 0, 0,
#elif defined(CONFIG_MPC8245)
30, 30, 10, 10, 20, 10, 10, 10,
- 10, 20, 20, 15, 20, 15, 20, 0,
- 30, 0, 15, 40, 20, 25, 20, 40,
+ 10, 20, 20, 15, 20, 15, 20, 30,
+ 30, 40, 15, 40, 20, 25, 20, 40,
25, 20, 10, 20, 15, 15, 15, 0,
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index cf529f4221d..b161b746818 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -202,3 +202,23 @@ void udelay_masked (unsigned long usec)
while (tmo >= get_timer_masked ())
/*NOP*/;
}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ ulong tbclk;
+ tbclk = CFG_HZ;
+ return tbclk;
+}
diff --git a/drivers/s3c24x0_i2c.c b/drivers/s3c24x0_i2c.c
index 2c27cb5458a..ef56cd1c31d 100644
--- a/drivers/s3c24x0_i2c.c
+++ b/drivers/s3c24x0_i2c.c
@@ -91,359 +91,357 @@ static void SetI2CSCL(int x)
}
-static int WaitForXfer(void)
+static int WaitForXfer (void)
{
- S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
- int i, status;
+ S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ int i, status;
- i = I2C_TIMEOUT * 1000;
- status = i2c->IICCON;
- while ((i > 0) && !(status & I2CCON_IRPND)) {
- udelay(1000);
+ i = I2C_TIMEOUT * 10000;
status = i2c->IICCON;
- i--;
- }
+ while ((i > 0) && !(status & I2CCON_IRPND)) {
+ udelay (100);
+ status = i2c->IICCON;
+ i--;
+ }
- return(status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
+ return (status & I2CCON_IRPND) ? I2C_OK : I2C_NOK_TOUT;
}
-static int IsACK(void)
+static int IsACK (void)
{
- S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
+ S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- return(!(i2c->IICSTAT & I2CSTAT_NACK));
+ return (!(i2c->IICSTAT & I2CSTAT_NACK));
}
-static void ReadWriteByte(void)
+static void ReadWriteByte (void)
{
- S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
+ S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
- i2c->IICCON &= ~I2CCON_IRPND;
+ i2c->IICCON &= ~I2CCON_IRPND;
}
void i2c_init (int speed, int slaveadd)
{
- S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
- S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
- ulong freq, pres = 16, div;
- int i, status;
+ S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ S3C24X0_GPIO *const gpio = S3C24X0_GetBase_GPIO ();
+ ulong freq, pres = 16, div;
+ int i, status;
- /* wait for some time to give previous transfer a chance to finish */
+ /* wait for some time to give previous transfer a chance to finish */
- i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay(1000);
+ i = I2C_TIMEOUT * 1000;
status = i2c->IICSTAT;
- i--;
- }
+ while ((i > 0) && (status & I2CSTAT_BSY)) {
+ udelay (1000);
+ status = i2c->IICSTAT;
+ i--;
+ }
- if ((status & I2CSTAT_BSY) || GetI2CSDA() == 0) {
+ if ((status & I2CSTAT_BSY) || GetI2CSDA () == 0) {
#ifdef CONFIG_S3C2410
- ulong old_gpecon = gpio->GPECON;
+ ulong old_gpecon = gpio->GPECON;
#endif
#ifdef CONFIG_S3C2400
- ulong old_gpecon = gpio->PGCON;
+ ulong old_gpecon = gpio->PGCON;
#endif
- /* bus still busy probably by (most) previously interrupted transfer */
+ /* bus still busy probably by (most) previously interrupted transfer */
#ifdef CONFIG_S3C2410
- /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
- gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
+ /* set I2CSDA and I2CSCL (GPE15, GPE14) to GPIO */
+ gpio->GPECON = (gpio->GPECON & ~0xF0000000) | 0x10000000;
#endif
#ifdef CONFIG_S3C2400
- /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
- gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+ /* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
+ gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
#endif
- /* toggle I2CSCL until bus idle */
- SetI2CSCL(0); udelay(1000);
- i = 10;
- while ((i > 0) && (GetI2CSDA() != 1)) {
- SetI2CSCL(1); udelay(1000);
- SetI2CSCL(0); udelay(1000);
- i--;
- }
- SetI2CSCL(1); udelay(1000);
+ /* toggle I2CSCL until bus idle */
+ SetI2CSCL (0);
+ udelay (1000);
+ i = 10;
+ while ((i > 0) && (GetI2CSDA () != 1)) {
+ SetI2CSCL (1);
+ udelay (1000);
+ SetI2CSCL (0);
+ udelay (1000);
+ i--;
+ }
+ SetI2CSCL (1);
+ udelay (1000);
- /* restore pin functions */
+ /* restore pin functions */
#ifdef CONFIG_S3C2410
- gpio->GPECON = old_gpecon;
+ gpio->GPECON = old_gpecon;
#endif
#ifdef CONFIG_S3C2400
- gpio->PGCON = old_gpecon;
+ gpio->PGCON = old_gpecon;
#endif
- }
+ }
- /* calculate prescaler and divisor values */
- freq = get_PCLK();
- if ((freq / pres / (16+1)) > speed)
- /* set prescaler to 512 */
- pres = 512;
+ /* calculate prescaler and divisor values */
+ freq = get_PCLK ();
+ if ((freq / pres / (16 + 1)) > speed)
+ /* set prescaler to 512 */
+ pres = 512;
- div = 0;
- while ((freq / pres / (div+1)) > speed)
- div++;
+ div = 0;
+ while ((freq / pres / (div + 1)) > speed)
+ div++;
- /* set prescaler, divisor according to freq, also set
- ACKGEN, IRQ */
- i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
+ /* set prescaler, divisor according to freq, also set
+ * ACKGEN, IRQ */
+ i2c->IICCON = (div & 0x0F) | 0xA0 | ((pres == 512) ? 0x40 : 0);
- /* init to SLAVE REVEIVE and set slaveaddr */
- i2c->IICSTAT = 0;
- i2c->IICADD = slaveadd;
- /* program Master Transmit (and implicit STOP) */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+ /* init to SLAVE REVEIVE and set slaveaddr */
+ i2c->IICSTAT = 0;
+ i2c->IICADD = slaveadd;
+ /* program Master Transmit (and implicit STOP) */
+ i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
}
/*
- cmd_type is 0 for write 1 for read.
-
- addr_len can take any value from 0-255, it is only limited
- by the char, we could make it larger if needed. If it is
- 0 we skip the address write cycle.
-
-*/
+ * cmd_type is 0 for write, 1 for read.
+ *
+ * addr_len can take any value from 0-255, it is only limited
+ * by the char, we could make it larger if needed. If it is
+ * 0 we skip the address write cycle.
+ */
static
-int i2c_transfer(unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[],
- unsigned short data_len)
+int i2c_transfer (unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[], unsigned short data_len)
{
- S3C24X0_I2C * const i2c = S3C24X0_GetBase_I2C();
- int i, status, result;
-
- if (data == 0 || data_len == 0) {
- /*Don't support data transfer of no length or to address 0*/
- printf( "i2c_transfer: bad call\n" );
- return I2C_NOK;
- }
-
- /*CheckDelay(); */
-
- /* Check I2C bus idle */
- i = I2C_TIMEOUT * 1000;
- status = i2c->IICSTAT;
- while ((i > 0) && (status & I2CSTAT_BSY)) {
- udelay(1000);
- status = i2c->IICSTAT;
- i--;
- }
+ S3C24X0_I2C *const i2c = S3C24X0_GetBase_I2C ();
+ int i, status, result;
+ if (data == 0 || data_len == 0) {
+ /*Don't support data transfer of no length or to address 0 */
+ printf ("i2c_transfer: bad call\n");
+ return I2C_NOK;
+ }
- if (status & I2CSTAT_BSY) {
- result = I2C_NOK_TOUT;
- return(result);
- }
+ /* Check I2C bus idle */
+ i = I2C_TIMEOUT * 1000;
+ status = i2c->IICSTAT;
+ while ((i > 0) && (status & I2CSTAT_BSY)) {
+ udelay (1000);
+ status = i2c->IICSTAT;
+ i--;
+ }
- i2c->IICCON |= 0x80;
+ if (status & I2CSTAT_BSY)
+ return I2C_NOK_TOUT;
- result = I2C_OK;
+ i2c->IICCON |= 0x80;
+ result = I2C_OK;
- switch (cmd_type) {
+ switch (cmd_type) {
case I2C_WRITE:
- if (addr && addr_len) {
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- result = WaitForXfer();
- i2c->IICDS = addr[i];
- ReadWriteByte();
- i++;
- }
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- result = WaitForXfer();
- i2c->IICDS = data[i];
- ReadWriteByte();
- i++;
- }
- } else {
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
- i = 0;
- while ((i < data_len) && (result = I2C_OK)) {
- result = WaitForXfer();
- i2c->IICDS = data[i];
- ReadWriteByte();
- i++;
+ if (addr && addr_len) {
+ i2c->IICDS = chip;
+ /* send START */
+ i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ i = 0;
+ while ((i < addr_len) && (result == I2C_OK)) {
+ result = WaitForXfer ();
+ i2c->IICDS = addr[i];
+ ReadWriteByte ();
+ i++;
+ }
+ i = 0;
+ while ((i < data_len) && (result == I2C_OK)) {
+ result = WaitForXfer ();
+ i2c->IICDS = data[i];
+ ReadWriteByte ();
+ i++;
+ }
+ } else {
+ i2c->IICDS = chip;
+ /* send START */
+ i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP;
+ i = 0;
+ while ((i < data_len) && (result = I2C_OK)) {
+ result = WaitForXfer ();
+ i2c->IICDS = data[i];
+ ReadWriteByte ();
+ i++;
+ }
}
- }
- if (result == I2C_OK)
- result = WaitForXfer();
+ if (result == I2C_OK)
+ result = WaitForXfer ();
- /* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte();
- break;
+ /* send STOP */
+ i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+ ReadWriteByte ();
+ break;
case I2C_READ:
- if (addr && addr_len) {
- i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer();
- if (IsACK()) {
- i = 0;
- while ((i < addr_len) && (result == I2C_OK)) {
- i2c->IICDS = addr[i];
- ReadWriteByte();
- result = WaitForXfer();
- i++;
- }
-
- i2c->IICDS = chip;
- /* resend START */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP;
- ReadWriteByte();
- result = WaitForXfer();
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte();
- result = WaitForXfer();
- data[i] = i2c->IICDS;
- i++;
- }
- } else {
- result = I2C_NACK;
- }
+ if (addr && addr_len) {
+ i2c->IICSTAT = I2C_MODE_MT | I2C_TXRX_ENA;
+ i2c->IICDS = chip;
+ /* send START */
+ i2c->IICSTAT |= I2C_START_STOP;
+ result = WaitForXfer ();
+ if (IsACK ()) {
+ i = 0;
+ while ((i < addr_len) && (result == I2C_OK)) {
+ i2c->IICDS = addr[i];
+ ReadWriteByte ();
+ result = WaitForXfer ();
+ i++;
+ }
+
+ i2c->IICDS = chip;
+ /* resend START */
+ i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA |
+ I2C_START_STOP;
+ ReadWriteByte ();
+ result = WaitForXfer ();
+ i = 0;
+ while ((i < data_len) && (result == I2C_OK)) {
+ /* disable ACK for final READ */
+ if (i == data_len - 1)
+ i2c->IICCON &= ~0x80;
+ ReadWriteByte ();
+ result = WaitForXfer ();
+ data[i] = i2c->IICDS;
+ i++;
+ }
+ } else {
+ result = I2C_NACK;
+ }
- } else {
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- i2c->IICDS = chip;
- /* send START */
- i2c->IICSTAT |= I2C_START_STOP;
- result = WaitForXfer();
-
- if (IsACK()) {
- i = 0;
- while ((i < data_len) && (result == I2C_OK)) {
- /* disable ACK for final READ */
- if (i == data_len - 1)
- i2c->IICCON &= ~0x80;
- ReadWriteByte();
- result = WaitForXfer();
- data[i] = i2c->IICDS;
- i++;
- }
} else {
- result = I2C_NACK;
+ i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+ i2c->IICDS = chip;
+ /* send START */
+ i2c->IICSTAT |= I2C_START_STOP;
+ result = WaitForXfer ();
+
+ if (IsACK ()) {
+ i = 0;
+ while ((i < data_len) && (result == I2C_OK)) {
+ /* disable ACK for final READ */
+ if (i == data_len - 1)
+ i2c->IICCON &= ~0x80;
+ ReadWriteByte ();
+ result = WaitForXfer ();
+ data[i] = i2c->IICDS;
+ i++;
+ }
+ } else {
+ result = I2C_NACK;
+ }
}
- }
- /* send STOP */
- i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
- ReadWriteByte();
- break;
+ /* send STOP */
+ i2c->IICSTAT = I2C_MODE_MR | I2C_TXRX_ENA;
+ ReadWriteByte ();
+ break;
default:
- printf( "i2c_transfer: bad call\n" );
- result = I2C_NOK;
- break;
- }
+ printf ("i2c_transfer: bad call\n");
+ result = I2C_NOK;
+ break;
+ }
- return (result);
+ return (result);
}
int i2c_probe (uchar chip)
{
- uchar buf[1];
+ uchar buf[1];
- buf[0] = 0;
+ buf[0] = 0;
- /*
- * What is needed is to send the chip address and verify that the
- * address was <ACK>ed (i.e. there was a chip at that address which
- * drove the data line low).
- */
- return(i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
+ /*
+ * What is needed is to send the chip address and verify that the
+ * address was <ACK>ed (i.e. there was a chip at that address which
+ * drove the data line low).
+ */
+ return (i2c_transfer (I2C_READ, chip << 1, 0, 0, buf, 1) != I2C_OK);
}
int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
{
- uchar xaddr[4];
- int ret;
+ uchar xaddr[4];
+ int ret;
- if ( alen > 4 ) {
- printf ("I2C read: addr len %d not supported\n", alen);
- return 1;
- }
-
- if ( alen > 0 ) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
+ if (alen > 4) {
+ printf ("I2C read: addr len %d not supported\n", alen);
+ return 1;
+ }
+ if (alen > 0) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if( alen > 0 )
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if (alen > 0)
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- if( (ret = i2c_transfer(I2C_READ, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
- printf( "I2c read: failed %d\n", ret);
- return 1;
- }
- return 0;
+ if ((ret =
+ i2c_transfer (I2C_READ, chip << 1, &xaddr[4 - alen], alen,
+ buffer, len)) != 0) {
+ printf ("I2c read: failed %d\n", ret);
+ return 1;
+ }
+ return 0;
}
int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
{
- uchar xaddr[4];
+ uchar xaddr[4];
- if ( alen > 4 ) {
- printf ("I2C write: addr len %d not supported\n", alen);
- return 1;
- }
-
- if ( alen > 0 ) {
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
- }
+ if (alen > 4) {
+ printf ("I2C write: addr len %d not supported\n", alen);
+ return 1;
+ }
+ if (alen > 0) {
+ xaddr[0] = (addr >> 24) & 0xFF;
+ xaddr[1] = (addr >> 16) & 0xFF;
+ xaddr[2] = (addr >> 8) & 0xFF;
+ xaddr[3] = addr & 0xFF;
+ }
#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
- * address and the extra bits end up in the "chip address"
- * bit slots. This makes a 24WC08 (1Kbyte) chip look like
- * four 256 byte chips.
- *
- * Note that we consider the length of the address field to
- * still be one byte because the extra address bits are
- * hidden in the chip address.
- */
- if( alen > 0 )
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ /*
+ * EEPROM chips that implement "address overflow" are ones
+ * like Catalyst 24WC04/08/16 which has 9/10/11 bits of
+ * address and the extra bits end up in the "chip address"
+ * bit slots. This makes a 24WC08 (1Kbyte) chip look like
+ * four 256 byte chips.
+ *
+ * Note that we consider the length of the address field to
+ * still be one byte because the extra address bits are
+ * hidden in the chip address.
+ */
+ if (alen > 0)
+ chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- return (i2c_transfer(I2C_WRITE, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
+ return (i2c_transfer
+ (I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
+ len) != 0);
}
-
#endif /* CONFIG_HARD_I2C */
#endif /* CONFIG_DRIVER_S3C24X0_I2C */
diff --git a/include/miiphy.h b/include/miiphy.h
index 050db9ab57d..672baf9f40a 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -46,6 +46,9 @@ int miiphy_info(unsigned char addr, unsigned int *oui, unsigned char *model,
int miiphy_reset(unsigned char addr);
int miiphy_speed(unsigned char addr);
int miiphy_duplex(unsigned char addr);
+#ifdef CFG_FAULT_ECHO_LINK_DOWN
+int miiphy_link(unsigned char addr);
+#endif
/* phy seed setup */
diff --git a/net/net.c b/net/net.c
index a139742292d..c34f41dee02 100644
--- a/net/net.c
+++ b/net/net.c
@@ -65,6 +65,10 @@
#include "bootp.h"
#include "tftp.h"
#include "rarp.h"
+#ifdef CONFIG_STATUS_LED
+#include <status_led.h>
+#include <miiphy.h>
+#endif
#if (CONFIG_COMMANDS & CFG_CMD_NET)
@@ -361,6 +365,18 @@ restart:
break;
}
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CFG_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED)
+ /*
+ * Echo the inverted link state to the fault LED.
+ */
+ if(miiphy_link(CFG_FAULT_MII_ADDR)) {
+ status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
+ } else {
+ status_led_set (STATUS_LED_RED, STATUS_LED_ON);
+ }
+#endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */
+#endif /* CONFIG_MII, ... */
/*
* Main packet reception loop. Loop receiving packets until
@@ -398,6 +414,18 @@ restart:
if (timeHandler && ((get_timer(0) - timeStart) > timeDelta)) {
thand_f *x;
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CFG_FAULT_ECHO_LINK_DOWN) && defined(CONFIG_STATUS_LED) && defined(STATUS_LED_RED)
+ /*
+ * Echo the inverted link state to the fault LED.
+ */
+ if(miiphy_link(CFG_FAULT_MII_ADDR)) {
+ status_led_set (STATUS_LED_RED, STATUS_LED_OFF);
+ } else {
+ status_led_set (STATUS_LED_RED, STATUS_LED_ON);
+ }
+#endif /* CFG_FAULT_ECHO_LINK_DOWN, ... */
+#endif /* CONFIG_MII, ... */
x = timeHandler;
timeHandler = (thand_f *)0;
(*x)();