diff options
136 files changed, 8846 insertions, 836 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 57a79b4138..3f16dabf52 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -531,6 +531,7 @@ Prakash Kumar <prakash@embedx.com> Guennadi Liakhovetski <g.liakhovetski@gmx.de> mx31ads i.MX31 + SMDK6400 S3C6400 David Müller <d.mueller@elsoft.ch> @@ -753,12 +754,15 @@ Yusuke Goda <goda.yusuke@renesas.com> MIGO-R SH7722 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + <iwamatsu.nobuhiro@renesas.com> MS7750SE SH7750 MS7722SE SH7722 R7780MP SH7780 R2DPlus SH7751R SH7763RDP SH7763 + RSK7203 SH7203 + AP325RXA SH7723 Mark Jonas <mark.jonas@de.bosch.com> @@ -767,6 +771,11 @@ Mark Jonas <mark.jonas@de.bosch.com> Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> MS7720SE SH7720 + R0P77850011RL SH7785 + +Yusuke Goda <goda.yusuke@renesas.com> + + MIGO-R SH7722 ######################################################################### # Blackfin Systems: # @@ -519,6 +519,7 @@ LIST_ARM11=" \ imx31_litekit \ imx31_phycore \ mx31ads \ + smdk6400 \ " ######################################################################### @@ -740,6 +741,9 @@ LIST_blackfin=" \ ## SH Systems ######################################################################### +LIST_sh2=" \ + rsk7203 \ +" LIST_sh3=" \ mpr2 \ ms7720se \ @@ -752,9 +756,12 @@ LIST_sh4=" \ r7780mp \ r2dplus \ sh7763rdp \ + sh7785lcr \ + ap325rxa \ " LIST_sh=" \ + ${LIST_sh2} \ ${LIST_sh3} \ ${LIST_sh4} \ " @@ -799,7 +806,7 @@ do |mips|mips_el \ |nios|nios2 \ |ppc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \ - |sh|sh3|sh4 \ + |sh|sh2|sh3|sh4 \ |sparc \ |x86|I486 \ ) @@ -2496,7 +2496,7 @@ cp1026_config: unconfig @board/integratorcp/split_by_variant.sh $@ davinci_dvevm_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci + @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci davinci_schmoogie_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci @@ -2759,6 +2759,23 @@ mx31ads_config : unconfig omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx +######################################################################### +## ARM1176 Systems +######################################################################### +smdk6400_noUSB_config \ +smdk6400_config : unconfig + @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 + @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ + echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ + $(MKCONFIG) $(@:_config=) arm arm1176 smdk6400 samsung s3c64xx; \ + else \ + echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ + $(MKCONFIG) $(@:_noUSB_config=) arm arm1176 smdk6400 samsung s3c64xx; \ + fi + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + #======================================================================== # i386 #======================================================================== @@ -3007,6 +3024,14 @@ mimc200_config : unconfig #======================================================================== ######################################################################### +## sh2 (Renesas SuperH) +######################################################################### +rsk7203_config: unconfig + @ >include/config.h + @echo "#define CONFIG_RSK7203 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh2 rsk7203 + +######################################################################### ## sh3 (Renesas SuperH) ######################################################################### @@ -3042,17 +3067,27 @@ ms7722se_config : unconfig r2dplus_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r2dplus + @$(MKCONFIG) -a $(@:_config=) sh sh4 r2dplus r7780mp_config: unconfig @mkdir -p $(obj)include @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 r7780mp + @$(MKCONFIG) -a $(@:_config=) sh sh4 r7780mp sh7763rdp_config : unconfig @mkdir -p $(obj)include @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h - @./mkconfig -a $(@:_config=) sh sh4 sh7763rdp + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7763rdp + +sh7785lcr_config : unconfig + @ >include/config.h + @echo "#define CONFIG_SH7785LCR 1" >> include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 sh7785lcr + +ap325rxa_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa #======================================================================== # SPARC diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c index ba3d7d2a0d..deaa292b9a 100644 --- a/board/ads5121/ads5121.c +++ b/board/ads5121/ads5121.c @@ -25,6 +25,7 @@ #include <mpc512x.h> #include <asm/bitops.h> #include <command.h> +#include <asm/processor.h> #include <fdt_support.h> #ifdef CONFIG_MISC_INIT_R #include <i2c.h> @@ -92,6 +93,9 @@ int board_early_init_f (void) * Configure Flash Speed */ *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG; + if (SVR_MJREV (im->sysconf.spridr) >= 2) { + *((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CFG_CS_ALETIMING; + } /* * Enable clocks */ diff --git a/board/ap325rxa/Makefile b/board/ap325rxa/Makefile new file mode 100644 index 0000000000..21f3e6e29c --- /dev/null +++ b/board/ap325rxa/Makefile @@ -0,0 +1,51 @@ +######################################################################### +# +# Copyright (C) 2008 Renesas Solutions Corp. +# Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> +# +# board/ap325rxa/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := ap325rxa.o cpld-ap325rxa.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ap325rxa/ap325rxa.c b/board/ap325rxa/ap325rxa.c new file mode 100644 index 0000000000..cfa02617a2 --- /dev/null +++ b/board/ap325rxa/ap325rxa.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +/* PRI control register */ +#define PRPRICR5 0xFF800048 /* LMB */ +#define PRPRICR5_D 0x2a + +/* FPGA control */ +#define FPGA_NAND_CTL 0xB410020C +#define FPGA_NAND_RST 0x0008 +#define FPGA_NAND_INIT 0x0000 +#define FPGA_NAND_RST_WAIT 10000 + +/* I/O port data */ +#define PACR_D 0x0000 +#define PBCR_D 0x0000 +#define PCCR_D 0x1000 +#define PDCR_D 0x0000 +#define PECR_D 0x0410 +#define PFCR_D 0xffff +#define PGCR_D 0x0000 +#define PHCR_D 0x5011 +#define PJCR_D 0x4400 +#define PKCR_D 0x7c00 +#define PLCR_D 0x0000 +#define PMCR_D 0x0000 +#define PNCR_D 0x0000 +#define PQCR_D 0x0000 +#define PRCR_D 0x0000 +#define PSCR_D 0x0000 +#define PTCR_D 0x0010 +#define PUCR_D 0x0fff +#define PVCR_D 0xffff +#define PWCR_D 0x0000 +#define PXCR_D 0x7500 +#define PYCR_D 0x0000 +#define PZCR_D 0x5540 + +/* Pin Function Controler data */ +#define PSELA_D 0x1410 +#define PSELB_D 0x0140 +#define PSELC_D 0x0000 +#define PSELD_D 0x0400 + +/* I/O Buffer Hi-Z data */ +#define HIZCRA_D 0x0000 +#define HIZCRB_D 0x1000 +#define HIZCRC_D 0x0000 +#define HIZCRD_D 0x0000 + +/* Module select reg data */ +#define MSELCRA_D 0x0014 +#define MSELCRB_D 0x0018 + +/* Module Stop reg Data */ +#define MSTPCR2_D 0xFFD9F280 + +/* CPLD loader */ +extern void init_cpld(void); + +int checkboard(void) +{ + puts("BOARD: AP325RXA\n"); + return 0; +} + +int board_init(void) +{ + /* Pin Function Controler Init */ + outw(PSELA_D, PSELA); + outw(PSELB_D, PSELB); + outw(PSELC_D, PSELC); + outw(PSELD_D, PSELD); + + /* I/O Buffer Hi-Z Init */ + outw(HIZCRA_D, HIZCRA); + outw(HIZCRB_D, HIZCRB); + outw(HIZCRC_D, HIZCRC); + outw(HIZCRD_D, HIZCRD); + + /* Module select reg Init */ + outw(MSELCRA_D, MSELCRA); + outw(MSELCRB_D, MSELCRB); + + /* Module Stop reg Init */ + outl(MSTPCR2_D, MSTPCR2); + + /* I/O ports */ + outw(PACR_D, PACR); + outw(PBCR_D, PBCR); + outw(PCCR_D, PCCR); + outw(PDCR_D, PDCR); + outw(PECR_D, PECR); + outw(PFCR_D, PFCR); + outw(PGCR_D, PGCR); + outw(PHCR_D, PHCR); + outw(PJCR_D, PJCR); + outw(PKCR_D, PKCR); + outw(PLCR_D, PLCR); + outw(PMCR_D, PMCR); + outw(PNCR_D, PNCR); + outw(PQCR_D, PQCR); + outw(PRCR_D, PRCR); + outw(PSCR_D, PSCR); + outw(PTCR_D, PTCR); + outw(PUCR_D, PUCR); + outw(PVCR_D, PVCR); + outw(PWCR_D, PWCR); + outw(PXCR_D, PXCR); + outw(PYCR_D, PYCR); + outw(PZCR_D, PZCR); + + /* PRI control register Init */ + outl(PRPRICR5_D, PRPRICR5); + + /* cpld init */ + init_cpld(); + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state(unsigned short value) +{ +} + +void ide_set_reset(int idereset) +{ + outw(FPGA_NAND_RST, FPGA_NAND_CTL); /* NAND RESET */ + udelay(FPGA_NAND_RST_WAIT); + outw(FPGA_NAND_INIT, FPGA_NAND_CTL); +} diff --git a/board/ap325rxa/config.mk b/board/ap325rxa/config.mk new file mode 100644 index 0000000000..b52a5e5cb6 --- /dev/null +++ b/board/ap325rxa/config.mk @@ -0,0 +1,26 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 diff --git a/board/ap325rxa/cpld-ap325rxa.c b/board/ap325rxa/cpld-ap325rxa.c new file mode 100644 index 0000000000..16fadcbca7 --- /dev/null +++ b/board/ap325rxa/cpld-ap325rxa.c @@ -0,0 +1,206 @@ +/*************************************************************** + * Project: + * CPLD SlaveSerial Configuration via embedded microprocessor. + * + * Copyright info: + * + * This is free software; you can redistribute it and/or modify + * it as you like. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Description: + * + * This is the main source file that will allow a microprocessor + * to configure Xilinx Virtex, Virtex-E, Virtex-EM, Virtex-II, + * and Spartan-II devices via the SlaveSerial Configuration Mode. + * This code is discussed in Xilinx Application Note, XAPP502. + * + * History: + * 3-October-2001 MN/MP - Created + * 20-August-2008 Renesas Solutions - Modified to SH7723 + ****************************************************************/ + +#include <common.h> + +/* Serial */ +#define SCIF_BASE 0xffe00000 /* SCIF0 */ +#define SCSMR (vu_short *)(SCIF_BASE + 0x00) +#define SCBRR (vu_char *)(SCIF_BASE + 0x04) +#define SCSCR (vu_short *)(SCIF_BASE + 0x08) +#define SC_TDR (vu_char *)(SCIF_BASE + 0x0C) +#define SC_SR (vu_short *)(SCIF_BASE + 0x10) +#define SCFCR (vu_short *)(SCIF_BASE + 0x18) +#define RFCR (vu_long *)0xFE400020 + +#define SCSCR_INIT 0x0038 +#define SCSCR_CLR 0x0000 +#define SCFCR_INIT 0x0006 +#define SCSMR_INIT 0x0080 +#define RFCR_CLR 0xA400 +#define SCI_TD_E 0x0020 +#define SCI_TDRE_CLEAR 0x00df + +#define BPS_SETTING_VALUE 1 /* 12.5MHz */ +#define WAIT_RFCR_COUNTER 500 + +/* CPLD data size */ +#define CPLD_DATA_SIZE 169216 + +/* out */ +#define CPLD_PFC_ADR ((vu_short *)0xA4050112) + +#define CPLD_PROG_ADR ((vu_char *)0xA4050132) +#define CPLD_PROG_DAT 0x80 + +/* in */ +#define CPLD_INIT_ADR ((vu_char *)0xA4050132) +#define CPLD_INIT_DAT 0x40 +#define CPLD_DONE_ADR ((vu_char *)0xA4050132) +#define CPLD_DONE_DAT 0x20 + +#define HIZCRB ((vu_short *)0xA405015A) + +/* data */ +#define CPLD_NOMAL_START 0xA0A80000 +#define CPLD_SAFE_START 0xA0AC0000 +#define MODE_SW (vu_char *)0xA405012A + +static void init_cpld_loader(void) +{ + + *SCSCR = SCSCR_CLR; + *SCFCR = SCFCR_INIT; + *SCSMR = SCSMR_INIT; + + *SCBRR = BPS_SETTING_VALUE; + + *RFCR = RFCR_CLR; /* Refresh counter clear */ + + while (*RFCR < WAIT_RFCR_COUNTER) + ; + + *SCFCR = 0x0; /* RTRG=00, TTRG=00 */ + /* MCE=0,TFRST=0,RFRST=0,LOOP=0 */ + *SCSCR = SCSCR_INIT; +} + +static int check_write_ready(void) +{ + u16 status = *SC_SR; + return status & SCI_TD_E; +} + +static void write_cpld_data(char ch) +{ + while (!check_write_ready()) + ; + + *SC_TDR = ch; + *SC_SR; + *SC_SR = SCI_TDRE_CLEAR; +} + +static int delay(void) +{ + int i; + int c = 0; + for (i = 0; i < 200; i++) { + c = *(volatile int *)0xa0000000; + } + return c; +} + +/*********************************************************************** + * + * Function: slave_serial + * + * Description: Initiates SlaveSerial Configuration. + * Calls ShiftDataOut() to output serial data + * + ***********************************************************************/ +static void slave_serial(void) +{ + int i; + unsigned char *flash; + + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + delay(); + + /* + * Toggle Program Pin by Toggling Program_OE bit + * This is accomplished by writing to the Program Register in the CPLD + * + * NOTE: The Program_OE bit should be driven high to bring the Virtex + * Program Pin low. Likewise, it should be driven low + * to bring the Virtex Program Pin to High-Z + */ + + *CPLD_PROG_ADR &= ~CPLD_PROG_DAT; /* PROGRAM_OE LOW */ + delay(); + + /* + * Bring Program High-Z + * (Drive Program_OE bit low to bring Virtex Program Pin to High-Z + */ + + /* Program_OE bit Low brings the Virtex Program Pin to High Z: */ + *CPLD_PROG_ADR |= CPLD_PROG_DAT; /* PROGRAM_OE HIGH */ + + while ((*CPLD_INIT_ADR & CPLD_INIT_DAT) == 0) + delay(); + + /* Begin Slave-Serial Configuration */ + flash = (unsigned char *)CPLD_NOMAL_START; + + for (i = 0; i < CPLD_DATA_SIZE; i++) + write_cpld_data(*flash++); +} + +/*********************************************************************** + * + * Function: check_done_bit + * + * Description: This function takes monitors the CPLD Input Register + * by checking the status of the DONE bit in that Register. + * By doing so, it monitors the Xilinx Virtex device's DONE + * Pin to see if configuration bitstream has been properly + * loaded + * + ***********************************************************************/ +static void check_done_bit(void) +{ + while (!(*CPLD_DONE_ADR & CPLD_DONE_DAT)) + ; +} + +/*********************************************************************** + * + * Function: init_cpld + * + * Description: Begins Slave Serial configuration of Xilinx FPGA + * + ***********************************************************************/ +void init_cpld(void) +{ + /* Init serial device */ + init_cpld_loader(); + + if (*CPLD_DONE_ADR & CPLD_DONE_DAT) /* Already DONE */ + return; + + *HIZCRB = 0x0000; + *CPLD_PFC_ADR = 0x7c00; /* FPGA PROG = OUTPUT */ + + /* write CPLD data from NOR flash to device */ + slave_serial(); + + /* + * Monitor the DONE bit in the CPLD Input Register to see if + * configuration successful + */ + + check_done_bit(); +} diff --git a/board/ap325rxa/lowlevel_init.S b/board/ap325rxa/lowlevel_init.S new file mode 100644 index 0000000000..4f6658879c --- /dev/null +++ b/board/ap325rxa/lowlevel_init.S @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * board/ap325rxa/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + mov.l DRVCRA_A, r1 + mov.l DRVCRA_D, r0 + mov.w r0, @r1 + + mov.l DRVCRB_A, r1 + mov.l DRVCRB_D, r0 + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 + mov.l RWTCSR_D1, r0 + mov.w r0, @r1 + + mov.l RWTCNT_A, r1 + mov.l RWTCNT_D, r0 + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 + mov.l RWTCSR_D2, r0 + mov.w r0, @r1 + + mov.l FRQCR_A, r1 + mov.l FRQCR_D, r0 + mov.l r0, @r1 + + mov.l CMNCR_A, r1 + mov.l CMNCR_D, r0 + mov.l r0, @r1 + + mov.l CS0BCR_A ,r1 + mov.l CS0BCR_D ,r0 + mov.l r0, @r1 + + mov.l CS4BCR_A ,r1 + mov.l CS4BCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5ABCR_A ,r1 + mov.l CS5ABCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5BBCR_A ,r1 + mov.l CS5BBCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6ABCR_A ,r1 + mov.l CS6ABCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6BBCR_A ,r1 + mov.l CS6BBCR_D ,r0 + mov.l r0, @r1 + + mov.l CS0WCR_A ,r1 + mov.l CS0WCR_D ,r0 + mov.l r0, @r1 + + mov.l CS4WCR_A ,r1 + mov.l CS4WCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5AWCR_A ,r1 + mov.l CS5AWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS5BWCR_A ,r1 + mov.l CS5BWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6AWCR_A ,r1 + mov.l CS6AWCR_D ,r0 + mov.l r0, @r1 + + mov.l CS6BWCR_A ,r1 + mov.l CS6BWCR_D ,r0 + mov.l r0, @r1 + + mov.l SBSC_SDCR_A, r1 + mov.l SBSC_SDCR_D1, r0 + mov.l r0, @r1 + + mov.l SBSC_SDWCR_A, r1 + mov.l SBSC_SDWCR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_SDPCR_A, r1 + mov.l SBSC_SDPCR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCSR_A, r1 + mov.l SBSC_RTCSR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCNT_A, r1 + mov.l SBSC_RTCNT_D, r0 + mov.l r0, @r1 + + mov.l SBSC_RTCOR_A, r1 + mov.l SBSC_RTCOR_D, r0 + mov.l r0, @r1 + + mov.l SBSC_SDMR3_A1, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SBSC_SDMR3_A2, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SLEEP_CNT, r1 +2: tst r1, r1 + nop + bf/s 2b + dt r1 + + mov.l SBSC_SDMR3_A3, r1 + mov.l SBSC_SDMR3_D, r0 + mov.b r0, @r1 + + mov.l SBSC_SDCR_A, r1 + mov.l SBSC_SDCR_D2, r0 + mov.l r0, @r1 + + mov.l CCR_A, r1 + mov.l CCR_D, r0 + mov.l r0, @r1 + + ! BL bit off (init = ON) (?!?) + + stc sr, r0 ! BL bit off(init=ON) + mov.l SR_MASK_D, r1 + and r1, r0 + ldc r0, sr + + rts + mov #0, r0 + + .align 2 + +DRVCRA_A: .long DRVCRA +DRVCRB_A: .long DRVCRB +DRVCRA_D: .long 0x4555 +DRVCRB_D: .long 0x0005 + +RWTCSR_A: .long RWTCSR +RWTCNT_A: .long RWTCNT +FRQCR_A: .long FRQCR +RWTCSR_D1: .long 0xa507 +RWTCSR_D2: .long 0xa504 +RWTCNT_D: .long 0x5a00 +FRQCR_D: .long 0x0b04474a + +SBSC_SDCR_A: .long SBSC_SDCR +SBSC_SDWCR_A: .long SBSC_SDWCR +SBSC_SDPCR_A: .long SBSC_SDPCR +SBSC_RTCSR_A: .long SBSC_RTCSR +SBSC_RTCNT_A: .long SBSC_RTCNT +SBSC_RTCOR_A: .long SBSC_RTCOR +SBSC_SDMR3_A1: .long 0xfe510000 +SBSC_SDMR3_A2: .long 0xfe500242 +SBSC_SDMR3_A3: .long 0xfe5c0042 + +SBSC_SDCR_D1: .long 0x92810112 +SBSC_SDCR_D2: .long 0x92810912 +SBSC_SDWCR_D: .long 0x05162482 +SBSC_SDPCR_D: .long 0x00300087 +SBSC_RTCSR_D: .long 0xa55a0212 +SBSC_RTCNT_D: .long 0xa55a0000 +SBSC_RTCOR_D: .long 0xa55a0040 +SBSC_SDMR3_D: .long 0x00 + +CMNCR_A: .long CMNCR +CS0BCR_A: .long CS0BCR +CS4BCR_A: .long CS4BCR +CS5ABCR_A: .long CS5ABCR +CS5BBCR_A: .long CS5BBCR +CS6ABCR_A: .long CS6ABCR +CS6BBCR_A: .long CS6BBCR +CS0WCR_A: .long CS0WCR +CS4WCR_A: .long CS4WCR +CS5AWCR_A: .long CS5AWCR +CS5BWCR_A: .long CS5BWCR +CS6AWCR_A: .long CS6AWCR +CS6BWCR_A: .long CS6BWCR + +CMNCR_D: .long 0x00000013 +CS0BCR_D: .long 0x24920400 +CS4BCR_D: .long 0x24920400 +CS5ABCR_D: .long 0x24920400 +CS5BBCR_D: .long 0x7fff0600 +CS6ABCR_D: .long 0x24920400 +CS6BBCR_D: .long 0x24920600 +CS0WCR_D: .long 0x00000480 +CS4WCR_D: .long 0x00000480 +CS5AWCR_D: .long 0x00000380 +CS5BWCR_D: .long 0x00000600 +CS6AWCR_D: .long 0x00000300 +CS6BWCR_D: .long 0x00000540 + +CCR_A: .long 0xff00001c +CCR_D: .long 0x0000090d + +SLEEP_CNT: .long 0x00000800 +SR_MASK_D: .long 0xEFFFFF0F diff --git a/board/ap325rxa/u-boot.lds b/board/ap325rxa/u-boot.lds new file mode 100644 index 0000000000..a670374580 --- /dev/null +++ b/board/ap325rxa/u-boot.lds @@ -0,0 +1,106 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x88000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x88000000 + (128*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/board/davinci/common/Makefile b/board/davinci/common/Makefile new file mode 100644 index 0000000000..127bb6ede9 --- /dev/null +++ b/board/davinci/common/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)board/$(VENDOR)/common) +endif + +LIB = $(obj)lib$(VENDOR).a + +COBJS := psc.o misc.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c new file mode 100644 index 0000000000..71a3b87acf --- /dev/null +++ b/board/davinci/common/misc.c @@ -0,0 +1,126 @@ +/* + * Miscelaneous DaVinci functions. + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return(0); +} + +static int dv_get_pllm_output(uint32_t pllm) +{ + return (pllm + 1) * (CFG_HZ_CLOCK / 1000000); +} + +void dv_display_clk_infos(void) +{ + printf("ARM Clock: %dMHz\n", dv_get_pllm_output(REG(PLL1_PLLM)) / 2); + printf("DDR Clock: %dMHz\n", dv_get_pllm_output(REG(PLL2_PLLM)) / + ((REG(PLL2_DIV2) & 0x1f) + 1) / 2); +} + +/* Read ethernet MAC address from EEPROM for DVEVM compatible boards. + * Returns 1 if found, 0 otherwise. + */ +int dvevm_read_mac_address(uint8_t *buf) +{ +#ifdef CFG_I2C_EEPROM_ADDR + /* Read MAC address. */ + if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7F00, CFG_I2C_EEPROM_ADDR_LEN, + (uint8_t *) &buf[0], 6)) + goto i2cerr; + + /* Check that MAC address is not null. */ + if (memcmp(buf, "\0\0\0\0\0\0", 6) == 0) + goto err; + + return 1; /* Found */ + +i2cerr: + printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR); +err: +#endif /* CFG_I2C_EEPROM_ADDR */ + + return 0; +} + +/* If there is a MAC address in the environment, and if it is not identical to + * the MAC address in the ROM, then a warning is printed and the MAC address + * from the environment is used. + * + * If there is no MAC address in the environment, then it will be initialized + * (silently) from the value in the ROM. + */ +void dv_configure_mac_address(uint8_t *rom_enetaddr) +{ + int i; + u_int8_t env_enetaddr[6]; + char *tmp = getenv("ethaddr"); + char *end; + + /* Read Ethernet MAC address from the U-Boot environment. + * If it is not defined, env_enetaddr[] will be cleared. */ + for (i = 0; i < 6; i++) { + env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end+1 : end; + } + + /* Check if ROM and U-Boot environment MAC addresses match. */ + if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 && + memcmp(env_enetaddr, rom_enetaddr, 6) != 0) { + printf("Warning: MAC addresses don't match:\n"); + printf(" ROM MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n", + rom_enetaddr[0], rom_enetaddr[1], + rom_enetaddr[2], rom_enetaddr[3], + rom_enetaddr[4], rom_enetaddr[5]); + printf(" \"ethaddr\" value: %02X:%02X:%02X:%02X:%02X:%02X\n", + env_enetaddr[0], env_enetaddr[1], + env_enetaddr[2], env_enetaddr[3], + env_enetaddr[4], env_enetaddr[5]) ; + debug("### Using MAC address from environment\n"); + } + if (!tmp) { + char ethaddr[20]; + + /* There is no MAC address in the environment, so we initialize + * it from the value in the ROM. */ + sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", + rom_enetaddr[0], rom_enetaddr[1], + rom_enetaddr[2], rom_enetaddr[3], + rom_enetaddr[4], rom_enetaddr[5]) ; + debug("### Setting environment from ROM MAC address = \"%s\"\n", + ethaddr); + setenv("ethaddr", ethaddr); + } +} diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h new file mode 100644 index 0000000000..4a57dbb89b --- /dev/null +++ b/board/davinci/common/misc.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MISC_H +#define __MISC_H + +extern void timer_init(void); +extern int eth_hw_init(void); + +void dv_display_clk_infos(void); +int dvevm_read_mac_address(uint8_t *buf); +void dv_configure_mac_address(uint8_t *rom_enetaddr); + +#endif /* __MISC_H */ diff --git a/board/davinci/common/psc.c b/board/davinci/common/psc.c new file mode 100644 index 0000000000..00dc07c3f6 --- /dev/null +++ b/board/davinci/common/psc.c @@ -0,0 +1,117 @@ +/* + * Power and Sleep Controller (PSC) functions. + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * Copyright (C) 2004 Texas Instruments. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +/* + * The DM6446 includes two separate power domains: "Always On" and "DSP". The + * "Always On" power domain is always on when the chip is on. The "Always On" + * domain is powered by the VDD pins of the DM6446. The majority of the + * DM6446's modules lie within the "Always On" power domain. A separate + * domain called the "DSP" domain houses the C64x+ and VICP. The "DSP" domain + * is not always on. The "DSP" power domain is powered by the CVDDDSP pins of + * the DM6446. + */ + +/* Works on Always On power domain only (no PD argument) */ +void lpsc_on(unsigned int id) +{ + dv_reg_p mdstat, mdctl; + + if (id >= DAVINCI_LPSC_GEM) + return; /* Don't work on DSP Power Domain */ + + mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); + mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + + while (REG(PSC_PTSTAT) & 0x01); + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + /* Special treatment for some modules as for sprue14 p.7.4.2 */ + switch (id) { + case DAVINCI_LPSC_VPSSSLV: + case DAVINCI_LPSC_EMAC: + case DAVINCI_LPSC_EMAC_WRAPPER: + case DAVINCI_LPSC_MDIO: + case DAVINCI_LPSC_USB: + case DAVINCI_LPSC_ATA: + case DAVINCI_LPSC_VLYNQ: + case DAVINCI_LPSC_UHPI: + case DAVINCI_LPSC_DDR_EMIF: + case DAVINCI_LPSC_AEMIF: + case DAVINCI_LPSC_MMC_SD: + case DAVINCI_LPSC_MEMSTICK: + case DAVINCI_LPSC_McBSP: + case DAVINCI_LPSC_GPIO: + *mdctl |= 0x200; + break; + } + + REG(PSC_PTCMD) = 0x01; + + while (REG(PSC_PTSTAT) & 0x03); + while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ +} + +/* If DSPLINK is used, we don't want U-Boot to power on the DSP. */ +#if !defined(CFG_USE_DSPLINK) +void dsp_on(void) +{ + int i; + + if (REG(PSC_PDSTAT1) & 0x1f) + return; /* Already on */ + + REG(PSC_GBLCTL) |= 0x01; + REG(PSC_PDCTL1) |= 0x01; + REG(PSC_PDCTL1) &= ~0x100; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; + REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; + REG(PSC_PTCMD) = 0x02; + + for (i = 0; i < 100; i++) { + if (REG(PSC_EPCPR) & 0x02) + break; + } + + REG(PSC_CHP_SHRTSW) = 0x01; + REG(PSC_PDCTL1) |= 0x100; + REG(PSC_EPCCR) = 0x02; + + for (i = 0; i < 100; i++) { + if (!(REG(PSC_PTSTAT) & 0x02)) + break; + } + + REG(PSC_GBLCTL) &= ~0x1f; +} +#endif /* CFG_USE_DSPLINK */ diff --git a/board/davinci/common/psc.h b/board/davinci/common/psc.h new file mode 100644 index 0000000000..6ab2575ae7 --- /dev/null +++ b/board/davinci/common/psc.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2008 Lyrtech <www.lyrtech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __PSC_H +#define __PSC_H + +void lpsc_on(unsigned int id); +void dsp_on(void); + +#endif /* __PSC_H */ diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c deleted file mode 100644 index 834eb68bd2..0000000000 --- a/board/davinci/dv-evm/dv_board.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/emac_defs.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern void timer_init(void); -extern int eth_hw_init(void); - - -/* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) -{ - dv_reg_p mdstat, mdctl; - - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - - while (REG(PSC_PTSTAT) & 0x01) {;} - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - if ( (id == DAVINCI_LPSC_VPSSSLV) || - (id == DAVINCI_LPSC_EMAC) || - (id == DAVINCI_LPSC_EMAC_WRAPPER) || - (id == DAVINCI_LPSC_MDIO) || - (id == DAVINCI_LPSC_USB) || - (id == DAVINCI_LPSC_ATA) || - (id == DAVINCI_LPSC_VLYNQ) || - (id == DAVINCI_LPSC_UHPI) || - (id == DAVINCI_LPSC_DDR_EMIF) || - (id == DAVINCI_LPSC_AEMIF) || - (id == DAVINCI_LPSC_MMC_SD) || - (id == DAVINCI_LPSC_MEMSTICK) || - (id == DAVINCI_LPSC_McBSP) || - (id == DAVINCI_LPSC_GPIO) - ) - *mdctl |= 0x200; - - REG(PSC_PTCMD) = 0x01; - - while (REG(PSC_PTSTAT) & 0x03) {;} - while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ -} - -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} - - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Workaround for TMS320DM6446 errata 1.3.22 */ - REG(PSC_SILVER_BULLET) = 0; - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_EMAC); - lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); - lpsc_on(DAVINCI_LPSC_MDIO); - lpsc_on(DAVINCI_LPSC_I2C); - lpsc_on(DAVINCI_LPSC_UART0); - lpsc_on(DAVINCI_LPSC_TIMER1); - lpsc_on(DAVINCI_LPSC_GPIO); - - /* Powerup the DSP */ - dsp_on(); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x0000e003; - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0; - - /* Enable UART0 MUX lines */ - REG(PINMUX1) |= 1; - - /* Enable EMAC and AEMIF pins */ - REG(PINMUX0) = 0x80000c1f; - - /* Enable I2C pin Mux */ - REG(PINMUX1) |= (1 << 7); - - /* Set the Bus Priority Register to appropriate value */ - REG(VBPR) = 0x20; - - timer_init(); - - return(0); -} - -int misc_init_r (void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - int clk = 0; - - clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); - - printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); - printf ("DDR Clock : %dMHz\n", (clk / 2)); - - /* Set Ethernet MAC address from EEPROM */ - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) { - printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR); - } else { - tmp[0] = 0xff; - for (i = 0; i < 6; i++) - tmp[0] &= buf[i]; - - if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) { - sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); - setenv("ethaddr", (char *)&tmp[0]); - } - } - - if (!eth_hw_init()) - printf("ethernet init failed!\n"); - - i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1); - - setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc")); - - return(0); -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} diff --git a/board/davinci/dv-evm/Makefile b/board/davinci/dvevm/Makefile index 579efe2623..fb31ee42b2 100644 --- a/board/davinci/dv-evm/Makefile +++ b/board/davinci/dvevm/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := dv_board.o +COBJS := $(BOARD).o SOBJS := board_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/davinci/dv-evm/board_init.S b/board/davinci/dvevm/board_init.S index 22d8adc18c..22d8adc18c 100644 --- a/board/davinci/dv-evm/board_init.S +++ b/board/davinci/dvevm/board_init.S diff --git a/board/davinci/dv-evm/config.mk b/board/davinci/dvevm/config.mk index aa89d0ec8a..aa89d0ec8a 100644 --- a/board/davinci/dv-evm/config.mk +++ b/board/davinci/dvevm/config.mk diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c new file mode 100644 index 0000000000..151f8a9007 --- /dev/null +++ b/board/davinci/dvevm/dvevm.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h> +#include "../common/psc.h" +#include "../common/misc.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + +#if !defined(CFG_USE_DSPLINK) + /* Powerup the DSP */ + dsp_on(); +#endif /* CFG_USE_DSPLINK */ + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r(void) +{ + uint8_t video_mode; + uint8_t eeprom_enetaddr[6]; + + dv_display_clk_infos(); + + /* Read Ethernet MAC address from EEPROM if available. */ + if (dvevm_read_mac_address(eeprom_enetaddr)) + dv_configure_mac_address(eeprom_enetaddr); + + if (!eth_hw_init()) + printf("ethernet init failed!\n"); + + i2c_read(0x39, 0x00, 1, &video_mode, 1); + + setenv("videostd", ((video_mode & 0x80) ? "pal" : "ntsc")); + + return(0); +} diff --git a/board/davinci/dv-evm/u-boot.lds b/board/davinci/dvevm/u-boot.lds index a4fcd1a9bb..a4fcd1a9bb 100644 --- a/board/davinci/dv-evm/u-boot.lds +++ b/board/davinci/dvevm/u-boot.lds diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile index 579efe2623..fb31ee42b2 100644 --- a/board/davinci/schmoogie/Makefile +++ b/board/davinci/schmoogie/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := dv_board.o +COBJS := $(BOARD).o SOBJS := board_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/schmoogie.c index 30175461f0..99fd32629f 100644 --- a/board/davinci/schmoogie/dv_board.c +++ b/board/davinci/schmoogie/schmoogie.c @@ -28,89 +28,11 @@ #include <i2c.h> #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> +#include "../common/psc.h" +#include "../common/misc.h" DECLARE_GLOBAL_DATA_PTR; -extern void timer_init(void); -extern int eth_hw_init(void); - - -/* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) -{ - dv_reg_p mdstat, mdctl; - - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - - while (REG(PSC_PTSTAT) & 0x01) {;} - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - if ( (id == DAVINCI_LPSC_VPSSSLV) || - (id == DAVINCI_LPSC_EMAC) || - (id == DAVINCI_LPSC_EMAC_WRAPPER) || - (id == DAVINCI_LPSC_MDIO) || - (id == DAVINCI_LPSC_USB) || - (id == DAVINCI_LPSC_ATA) || - (id == DAVINCI_LPSC_VLYNQ) || - (id == DAVINCI_LPSC_UHPI) || - (id == DAVINCI_LPSC_DDR_EMIF) || - (id == DAVINCI_LPSC_AEMIF) || - (id == DAVINCI_LPSC_MMC_SD) || - (id == DAVINCI_LPSC_MEMSTICK) || - (id == DAVINCI_LPSC_McBSP) || - (id == DAVINCI_LPSC_GPIO) - ) - *mdctl |= 0x200; - - REG(PSC_PTCMD) = 0x01; - - while (REG(PSC_PTSTAT) & 0x03) {;} - while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ -} - -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} - - int board_init(void) { /* arch number of the board */ @@ -131,8 +53,10 @@ int board_init(void) lpsc_on(DAVINCI_LPSC_TIMER1); lpsc_on(DAVINCI_LPSC_GPIO); +#if !defined(CFG_USE_DSPLINK) /* Powerup the DSP */ dsp_on(); +#endif /* CFG_USE_DSPLINK */ /* Bringup UART0 out of reset */ REG(UART0_PWREMU_MGMT) = 0x0000e003; @@ -157,11 +81,10 @@ int board_init(void) return(0); } -int misc_init_r (void) +int misc_init_r(void) { u_int8_t tmp[20], buf[10]; int i = 0; - int clk = 0; /* Set serial number from UID chip */ u_int8_t crc_tbl[256] = { @@ -199,17 +122,15 @@ int misc_init_r (void) 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35 }; - clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); - - printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); - printf ("DDR Clock : %dMHz\n", (clk / 2)); + dv_display_clk_infos(); /* Set serial number from UID chip */ if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) { printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR); forceenv("serial#", "FAILED"); } else { - if (buf[0] != 0x70) { /* Device Family Code */ + if (buf[0] != 0x70) { + /* Device Family Code */ printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR); forceenv("serial#", "FAILED"); } @@ -234,11 +155,3 @@ int misc_init_r (void) return(0); } - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c index f41081fd11..f47ba0f3bd 100644 --- a/board/davinci/sffsdr/sffsdr.c +++ b/board/davinci/sffsdr/sffsdr.c @@ -31,6 +31,8 @@ #include <i2c.h> #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> +#include "../common/psc.h" +#include "../common/misc.h" #define DAVINCI_A3CR (0x01E00014) /* EMIF-A CS3 config register. */ #define DAVINCI_A3CR_VAL (0x3FFFFFFD) /* EMIF-A CS3 value for FPGA. */ @@ -41,89 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void timer_init(void); -extern int eth_hw_init(void); - - -/* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) -{ - dv_reg_p mdstat, mdctl; - - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - - while (REG(PSC_PTSTAT) & 0x01); - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - switch (id) { - case DAVINCI_LPSC_VPSSSLV: - case DAVINCI_LPSC_EMAC: - case DAVINCI_LPSC_EMAC_WRAPPER: - case DAVINCI_LPSC_MDIO: - case DAVINCI_LPSC_USB: - case DAVINCI_LPSC_ATA: - case DAVINCI_LPSC_VLYNQ: - case DAVINCI_LPSC_UHPI: - case DAVINCI_LPSC_DDR_EMIF: - case DAVINCI_LPSC_AEMIF: - case DAVINCI_LPSC_MMC_SD: - case DAVINCI_LPSC_MEMSTICK: - case DAVINCI_LPSC_McBSP: - case DAVINCI_LPSC_GPIO: - *mdctl |= 0x200; - break; - } - - REG(PSC_PTCMD) = 0x01; - - while (REG(PSC_PTSTAT) & 0x03); - while ((*mdstat & 0x1f) != 0x03); /* Probably an overkill... */ -} - -#if !defined(CFG_USE_DSPLINK) -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} -#endif /* CFG_USE_DSPLINK */ - int board_init(void) { /* arch number of the board */ @@ -172,8 +91,10 @@ int board_init(void) return(0); } -/* Read ethernet MAC address from Integrity data structure inside EEPROM. */ -int read_mac_address(uint8_t *buf) +/* Read ethernet MAC address from Integrity data structure inside EEPROM. + * Returns 1 if found, 0 otherwise. + */ +static int sffsdr_read_mac_address(uint8_t *buf) { u_int32_t value, mac[2], address; @@ -182,7 +103,7 @@ int read_mac_address(uint8_t *buf) CFG_I2C_EEPROM_ADDR_LEN, (uint8_t *) &value, 4)) goto err; if (value != INTEGRITY_CHECKWORD_VALUE) - return 1; + return 0; /* Read SYSCFG structure offset. */ if (i2c_read(CFG_I2C_EEPROM_ADDR, INTEGRITY_SYSCFG_OFFSET, @@ -216,30 +137,23 @@ int read_mac_address(uint8_t *buf) buf[4] = mac[1] >> 24; buf[5] = mac[1] >> 16; - return 0; + return 1; /* Found */ err: printf("Read from EEPROM @ 0x%02x failed\n", CFG_I2C_EEPROM_ADDR); - return 1; + return 0; } /* Platform dependent initialisation. */ int misc_init_r(void) { - int i; - u_int8_t i2cbuf; - u_int8_t env_enetaddr[6], eeprom_enetaddr[6]; - char *tmp = getenv("ethaddr"); - char *end; - int clk; + uint8_t i2cbuf; + uint8_t eeprom_enetaddr[6]; /* EMIF-A CS3 configuration for FPGA. */ REG(DAVINCI_A3CR) = DAVINCI_A3CR_VAL; - clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); - - printf("ARM Clock: %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27) / 2); - printf("DDR Clock: %dMHz\n", (clk / 2)); + dv_display_clk_infos(); /* Configure I2C switch (PCA9543) to enable channel 0. */ i2cbuf = CFG_I2C_PCA9543_ENABLE_CH0; @@ -249,43 +163,9 @@ int misc_init_r(void) return 1; } - /* Read Ethernet MAC address from the U-Boot environment. */ - for (i = 0; i < 6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - - /* Read Ethernet MAC address from EEPROM. */ - if (read_mac_address(eeprom_enetaddr) == 0) { - if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 && - memcmp(env_enetaddr, eeprom_enetaddr, 6) != 0) { - printf("\nWarning: MAC addresses don't match:\n"); - printf("\tHW MAC address: " - "%02X:%02X:%02X:%02X:%02X:%02X\n", - eeprom_enetaddr[0], eeprom_enetaddr[1], - eeprom_enetaddr[2], eeprom_enetaddr[3], - eeprom_enetaddr[4], eeprom_enetaddr[5]); - printf("\t\"ethaddr\" value: " - "%02X:%02X:%02X:%02X:%02X:%02X\n", - env_enetaddr[0], env_enetaddr[1], - env_enetaddr[2], env_enetaddr[3], - env_enetaddr[4], env_enetaddr[5]) ; - debug("### Set MAC addr from environment\n"); - memcpy(eeprom_enetaddr, env_enetaddr, 6); - } - if (!tmp) { - char ethaddr[20]; - - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - eeprom_enetaddr[0], eeprom_enetaddr[1], - eeprom_enetaddr[2], eeprom_enetaddr[3], - eeprom_enetaddr[4], eeprom_enetaddr[5]) ; - debug("### Set environment from HW MAC addr = \"%s\"\n", - ethaddr); - setenv("ethaddr", ethaddr); - } - } + /* Read Ethernet MAC address from EEPROM if available. */ + if (sffsdr_read_mac_address(eeprom_enetaddr)) + dv_configure_mac_address(eeprom_enetaddr); if (!eth_hw_init()) printf("Ethernet init failed\n"); @@ -296,11 +176,3 @@ int misc_init_r(void) return(0); } - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile index 579efe2623..fb31ee42b2 100644 --- a/board/davinci/sonata/Makefile +++ b/board/davinci/sonata/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := dv_board.o +COBJS := $(BOARD).o SOBJS := board_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c deleted file mode 100644 index a6f9bc71c7..0000000000 --- a/board/davinci/sonata/dv_board.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * Parts are shamelessly stolen from various TI sources, original copyright - * follows: - * ----------------------------------------------------------------- - * - * Copyright (C) 2004 Texas Instruments. - * - * ---------------------------------------------------------------------------- - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * ---------------------------------------------------------------------------- - */ - -#include <common.h> -#include <i2c.h> -#include <asm/arch/hardware.h> -#include <asm/arch/emac_defs.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern void timer_init(void); -extern int eth_hw_init(void); - - -/* Works on Always On power domain only (no PD argument) */ -void lpsc_on(unsigned int id) -{ - dv_reg_p mdstat, mdctl; - - if (id >= DAVINCI_LPSC_GEM) - return; /* Don't work on DSP Power Domain */ - - mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); - mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); - - while (REG(PSC_PTSTAT) & 0x01) {;} - - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ - - *mdctl |= 0x03; - - /* Special treatment for some modules as for sprue14 p.7.4.2 */ - if ( (id == DAVINCI_LPSC_VPSSSLV) || - (id == DAVINCI_LPSC_EMAC) || - (id == DAVINCI_LPSC_EMAC_WRAPPER) || - (id == DAVINCI_LPSC_MDIO) || - (id == DAVINCI_LPSC_USB) || - (id == DAVINCI_LPSC_ATA) || - (id == DAVINCI_LPSC_VLYNQ) || - (id == DAVINCI_LPSC_UHPI) || - (id == DAVINCI_LPSC_DDR_EMIF) || - (id == DAVINCI_LPSC_AEMIF) || - (id == DAVINCI_LPSC_MMC_SD) || - (id == DAVINCI_LPSC_MEMSTICK) || - (id == DAVINCI_LPSC_McBSP) || - (id == DAVINCI_LPSC_GPIO) - ) - *mdctl |= 0x200; - - REG(PSC_PTCMD) = 0x01; - - while (REG(PSC_PTSTAT) & 0x03) {;} - while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */ -} - -void dsp_on(void) -{ - int i; - - if (REG(PSC_PDSTAT1) & 0x1f) - return; /* Already on */ - - REG(PSC_GBLCTL) |= 0x01; - REG(PSC_PDCTL1) |= 0x01; - REG(PSC_PDCTL1) &= ~0x100; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03; - REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff; - REG(PSC_PTCMD) = 0x02; - - for (i = 0; i < 100; i++) { - if (REG(PSC_EPCPR) & 0x02) - break; - } - - REG(PSC_CHP_SHRTSW) = 0x01; - REG(PSC_PDCTL1) |= 0x100; - REG(PSC_EPCCR) = 0x02; - - for (i = 0; i < 100; i++) { - if (!(REG(PSC_PTSTAT) & 0x02)) - break; - } - - REG(PSC_GBLCTL) &= ~0x1f; -} - - -int board_init(void) -{ - /* arch number of the board */ - gd->bd->bi_arch_number = MACH_TYPE_SONATA; - - /* address of boot parameters */ - gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - - /* Workaround for TMS320DM6446 errata 1.3.22 */ - REG(PSC_SILVER_BULLET) = 0; - - /* Power on required peripherals */ - lpsc_on(DAVINCI_LPSC_EMAC); - lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); - lpsc_on(DAVINCI_LPSC_MDIO); - lpsc_on(DAVINCI_LPSC_I2C); - lpsc_on(DAVINCI_LPSC_UART0); - lpsc_on(DAVINCI_LPSC_TIMER1); - lpsc_on(DAVINCI_LPSC_GPIO); - - /* Powerup the DSP */ - dsp_on(); - - /* Bringup UART0 out of reset */ - REG(UART0_PWREMU_MGMT) = 0x0000e003; - - /* Enable GIO3.3V cells used for EMAC */ - REG(VDD3P3V_PWDN) = 0; - - /* Enable UART0 MUX lines */ - REG(PINMUX1) |= 1; - - /* Enable EMAC and AEMIF pins */ - REG(PINMUX0) = 0x80000c1f; - - /* Enable I2C pin Mux */ - REG(PINMUX1) |= (1 << 7); - - /* Set the Bus Priority Register to appropriate value */ - REG(VBPR) = 0x20; - - timer_init(); - - return(0); -} - -int misc_init_r (void) -{ - u_int8_t tmp[20], buf[10]; - int i = 0; - int clk = 0; - - - clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1); - - printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2); - printf ("DDR Clock : %dMHz\n", (clk / 2)); - - /* Set Ethernet MAC address from EEPROM */ - if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) { - printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR); - } else { - tmp[0] = 0xff; - for (i = 0; i < 6; i++) - tmp[0] &= buf[i]; - - if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) { - sprintf((char *)&tmp[0], "%02x:%02x:%02x:%02x:%02x:%02x", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); - setenv("ethaddr", (char *)&tmp[0]); - } - } - - if (!eth_hw_init()) - printf("ethernet init failed!\n"); - - return(0); -} - -int dram_init(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return(0); -} diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c new file mode 100644 index 0000000000..a6fe82593a --- /dev/null +++ b/board/davinci/sonata/sonata.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emac_defs.h> +#include "../common/psc.h" +#include "../common/misc.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_SONATA; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* Workaround for TMS320DM6446 errata 1.3.22 */ + REG(PSC_SILVER_BULLET) = 0; + + /* Power on required peripherals */ + lpsc_on(DAVINCI_LPSC_EMAC); + lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER); + lpsc_on(DAVINCI_LPSC_MDIO); + lpsc_on(DAVINCI_LPSC_I2C); + lpsc_on(DAVINCI_LPSC_UART0); + lpsc_on(DAVINCI_LPSC_TIMER1); + lpsc_on(DAVINCI_LPSC_GPIO); + +#if !defined(CFG_USE_DSPLINK) + /* Powerup the DSP */ + dsp_on(); +#endif /* CFG_USE_DSPLINK */ + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x0000e003; + + /* Enable GIO3.3V cells used for EMAC */ + REG(VDD3P3V_PWDN) = 0; + + /* Enable UART0 MUX lines */ + REG(PINMUX1) |= 1; + + /* Enable EMAC and AEMIF pins */ + REG(PINMUX0) = 0x80000c1f; + + /* Enable I2C pin Mux */ + REG(PINMUX1) |= (1 << 7); + + /* Set the Bus Priority Register to appropriate value */ + REG(VBPR) = 0x20; + + timer_init(); + + return(0); +} + +int misc_init_r(void) +{ + uint8_t eeprom_enetaddr[6]; + + dv_display_clk_infos(); + + /* Read Ethernet MAC address from EEPROM if available. */ + if (dvevm_read_mac_address(eeprom_enetaddr)) + dv_configure_mac_address(eeprom_enetaddr); + + if (!eth_hw_init()) + printf("ethernet init failed!\n"); + + return(0); +} diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c index 5b33a8358e..768f40bb0a 100644 --- a/board/freescale/m54451evb/m54451evb.c +++ b/board/freescale/m54451evb/m54451evb.c @@ -49,7 +49,7 @@ phys_size_t initdram(int board_type) * Serial Boot: The dram is already initialized in start.S * only require to return DRAM size */ - dramsize = CFG_SDRAM_SIZE * 0x100000 >> 1; + dramsize = CFG_SDRAM_SIZE * 0x100000; #else volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); @@ -67,7 +67,7 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = 0x44; + gpio->mscr_sdram = CFG_SDRAM_DRV_STRENGTH; sdram->sdcs0 = (CFG_SDRAM_BASE | i); diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 4f02121a5d..100682a261 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -171,7 +171,7 @@ void pci_init_board(void) } #endif /* CONFIG_PCI */ -#if defined(CFG_FLASH_CFI) +#if defined(CONFIG_FLASH_CFI_LEGACY) #include <flash.h> ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) { @@ -189,7 +189,7 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->erase_blk_tout = 16384; info->write_tout = 2; info->buffer_write_tout = 5; - info->vendor = 2; /* CFI_CMDSET_AMD_STANDARD */ + info->vendor = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */ info->cmd_reset = 0x00F0; info->interface = FLASH_CFI_X8; info->legacy_unlock = 0; @@ -199,12 +199,11 @@ ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) info->ext_addr = 0; info->cfi_version = 0x3133; - info->cfi_offset = 0x0055; + info->cfi_offset = 0x0000; info->addr_unlock1 = 0x00000555; info->addr_unlock2 = 0x000002AA; info->name = "CFI conformant"; - info->size = 0; info->sector_count = CFG_ATMEL_TOTALSECT; info->start[0] = base; diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c index 7a59aa0674..0be5439ef9 100644 --- a/board/freescale/m54455evb/mii.c +++ b/board/freescale/m54455evb/mii.c @@ -237,6 +237,10 @@ void __mii_init(void) fecp = (fec_t *) info->miibase; + fecpin_setclear(dev, 1); + + mii_reset(info); + /* We use strictly polling mode only */ fecp->eimr = 0; diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile index f78de3a100..79f501a3ec 100644 --- a/board/integratorap/Makefile +++ b/board/integratorap/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := integratorap.o flash.o -SOBJS := lowlevel_init.o memsetup.o +SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/integratorcp/Makefile b/board/integratorcp/Makefile index 9201accb26..92a1a07b03 100644 --- a/board/integratorcp/Makefile +++ b/board/integratorcp/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a COBJS := integratorcp.o flash.o -SOBJS := lowlevel_init.o memsetup.o +SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/rsk7203/Makefile b/board/rsk7203/Makefile new file mode 100644 index 0000000000..7365d19301 --- /dev/null +++ b/board/rsk7203/Makefile @@ -0,0 +1,45 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# Copyright (C) 2008 Renesas Solutions Corp. +# +# u-boot/board/rsk7203/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := rsk7203.o +SOBJS := lowlevel_init.o + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/rsk7203/config.mk b/board/rsk7203/config.mk new file mode 100644 index 0000000000..61aa51f2b8 --- /dev/null +++ b/board/rsk7203/config.mk @@ -0,0 +1,28 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# Copyright (C) 2008 Renesas Solutions Corp. +# +# u-boot/board/rsk7203/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x0C7C0000 diff --git a/board/rsk7203/lowlevel_init.S b/board/rsk7203/lowlevel_init.S new file mode 100644 index 0000000000..e4d6f9e7df --- /dev/null +++ b/board/rsk7203/lowlevel_init.S @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + /* Cache setting */ + mov.l CCR1_A ,r1 + mov.l CCR1_D ,r0 + mov.l r0,@r1 + + /* ConfigurePortPins */ + mov.l PECRL3_A, r1 + mov.l PECRL3_D, r0 + mov.w r0,@r1 + + mov.l PCCRL4_A, r1 + mov.l PCCRL4_D0, r0 + mov.w r0,@r1 + + mov.l PECRL4_A, r1 + mov.l PECRL4_D0, r0 + mov.w r0,@r1 + + mov.l PEIORL_A, r1 + mov.l PEIORL_D0, r0 + mov.w r0,@r1 + + mov.l PCIORL_A, r1 + mov.l PCIORL_D, r0 + mov.w r0,@r1 + + mov.l PFCRH2_A, r1 + mov.l PFCRH2_D, r0 + mov.w r0,@r1 + + mov.l PFCRH3_A, r1 + mov.l PFCRH3_D, r0 + mov.w r0,@r1 + + mov.l PFCRH1_A, r1 + mov.l PFCRH1_D, r0 + mov.w r0,@r1 + + mov.l PFIORH_A, r1 + mov.l PFIORH_D, r0 + mov.w r0,@r1 + + mov.l PECRL1_A, r1 + mov.l PECRL1_D0, r0 + mov.w r0,@r1 + + mov.l PEIORL_A, r1 + mov.l PEIORL_D1, r0 + mov.w r0,@r1 + + /* Configure Operating Frequency */ + mov.l WTCSR_A ,r1 + mov.l WTCSR_D0 ,r0 + mov.w r0,@r1 + + mov.l WTCSR_A ,r1 + mov.l WTCSR_D1 ,r0 + mov.w r0,@r1 + + mov.l WTCNT_A ,r1 + mov.l WTCNT_D ,r0 + mov.w r0,@r1 + + /* Set clock mode*/ + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.w r0,@r1 + + /* Configure Bus And Memory */ +init_bsc_cs0: + mov.l PCCRL4_A,r1 + mov.l PCCRL4_D1,r0 + mov.w r0,@r1 + + mov.l PECRL1_A,r1 + mov.l PECRL1_D1,r0 + mov.w r0,@r1 + + mov.l CMNCR_A,r1 + mov.l CMNCR_D,r0 + mov.l r0,@r1 + + mov.l SC0BCR_A,r1 + mov.l SC0BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0WCR_A,r1 + mov.l CS0WCR_D,r0 + mov.l r0,@r1 + +init_bsc_cs1: + mov.l PECRL4_A,r1 + mov.l PECRL4_D1,r0 + mov.w r0,@r1 + + mov.l CS1WCR_A,r1 + mov.l CS1WCR_D,r0 + mov.l r0,@r1 + +init_sdram: + mov.l PCCRL2_A,r1 + mov.l PCCRL2_D,r0 + mov.w r0,@r1 + + mov.l PCCRL4_A,r1 + mov.l PCCRL4_D2,r0 + mov.w r0,@r1 + + mov.l PCCRL1_A,r1 + mov.l PCCRL1_D,r0 + mov.w r0,@r1 + + mov.l PCCRL3_A,r1 + mov.l PCCRL3_D,r0 + mov.w r0,@r1 + + mov.l CS3BCR_A,r1 + mov.l CS3BCR_D,r0 + mov.l r0,@r1 + + mov.l CS3WCR_A,r1 + mov.l CS3WCR_D,r0 + mov.l r0,@r1 + + mov.l SDCR_A,r1 + mov.l SDCR_D,r0 + mov.l r0,@r1 + + mov.l RTCOR_A,r1 + mov.l RTCOR_D,r0 + mov.l r0,@r1 + + mov.l RTCSR_A,r1 + mov.l RTCSR_D,r0 + mov.l r0,@r1 + + /* wait 200us */ + mov.l REPEAT_D,r3 + mov #0,r2 +repeat0: + add #1,r2 + cmp/hs r3,r2 + bf repeat0 + nop + + mov.l SDRAM_MODE, r1 + mov #0,r0 + mov.l r0, @r1 + + nop + rts + + .align 4 + +CCR1_A: .long CCR1 +CCR1_D: .long 0x0000090B +PCCRL4_A: .long 0xFFFE3910 +PCCRL4_D0: .long 0x00000000 +PECRL4_A: .long 0xFFFE3A10 +PECRL4_D0: .long 0x00000000 +PECRL3_A: .long 0xFFFE3A12 +PECRL3_D: .long 0x00000000 +PEIORL_A: .long 0xFFFE3A06 +PEIORL_D0: .long 0x00001C00 +PEIORL_D1: .long 0x00001C02 +PCIORL_A: .long 0xFFFE3906 +PCIORL_D: .long 0x00004000 +PFCRH2_A: .long 0xFFFE3A8C +PFCRH2_D: .long 0x00000000 +PFCRH3_A: .long 0xFFFE3A8A +PFCRH3_D: .long 0x00000000 +PFCRH1_A: .long 0xFFFE3A8E +PFCRH1_D: .long 0x00000000 +PFIORH_A: .long 0xFFFE3A84 +PFIORH_D: .long 0x00000729 +PECRL1_A: .long 0xFFFE3A16 +PECRL1_D0: .long 0x00000033 + + +WTCSR_A: .long 0xFFFE0000 +WTCSR_D0: .long 0x0000A518 +WTCSR_D1: .long 0x0000A51D +WTCNT_A: .long 0xFFFE0002 +WTCNT_D: .long 0x00005A84 +FRQCR_A: .long 0xFFFE0010 +FRQCR_D: .long 0x00000104 + +PCCRL4_D1: .long 0x00000010 +PECRL1_D1: .long 0x00000133 + +CMNCR_A: .long 0xFFFC0000 +CMNCR_D: .long 0x00001810 +SC0BCR_A: .long 0xFFFC0004 +SC0BCR_D: .long 0x10000400 +CS0WCR_A: .long 0xFFFC0028 +CS0WCR_D: .long 0x00000B41 +PECRL4_D1: .long 0x00000100 +CS1WCR_A: .long 0xFFFC002C +CS1WCR_D: .long 0x00000B01 +PCCRL4_D2: .long 0x00000011 +PCCRL3_A: .long 0xFFFE3912 +PCCRL3_D: .long 0x00000011 +PCCRL2_A: .long 0xFFFE3914 +PCCRL2_D: .long 0x00001111 +PCCRL1_A: .long 0xFFFE3916 +PCCRL1_D: .long 0x00001010 +PDCRL4_A: .long 0xFFFE3990 +PDCRL4_D: .long 0x00000011 +PDCRL3_A: .long 0xFFFE3992 +PDCRL3_D: .long 0x00000011 +PDCRL2_A: .long 0xFFFE3994 +PDCRL2_D: .long 0x00001111 +PDCRL1_A: .long 0xFFFE3996 +PDCRL1_D: .long 0x00001000 +CS3BCR_A: .long 0xFFFC0010 +CS3BCR_D: .long 0x00004400 +CS3WCR_A: .long 0xFFFC0034 +CS3WCR_D: .long 0x00002892 +SDCR_A: .long 0xFFFC004C +SDCR_D: .long 0x00000809 +RTCOR_A: .long 0xFFFC0058 +RTCOR_D: .long 0xA55A0041 +RTCSR_A: .long 0xFFFC0050 +RTCSR_D: .long 0xa55a0010 + +STBCR3_A: .long 0xFFFE0408 +STBCR3_D: .long 0x00000000 +STBCR4_A: .long 0xFFFE040C +STBCR4_D: .long 0x00000008 +STBCR5_A: .long 0xFFFE0410 +STBCR5_D: .long 0x00000000 +STBCR6_A: .long 0xFFFE0414 +STBCR6_D: .long 0x00000002 +SDRAM_MODE: .long 0xFFFC5040 +REPEAT_D: .long 0x00009C40 diff --git a/board/rsk7203/rsk7203.c b/board/rsk7203/rsk7203.c new file mode 100644 index 0000000000..beb943e85b --- /dev/null +++ b/board/rsk7203/rsk7203.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * u-boot/board/rsk7203/rsk7203.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Technology RSK7203\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state(unsigned short value) +{ +} diff --git a/board/rsk7203/u-boot.lds b/board/rsk7203/u-boot.lds new file mode 100644 index 0000000000..bf4433a236 --- /dev/null +++ b/board/rsk7203/u-boot.lds @@ -0,0 +1,101 @@ +/* + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + * Base address of internal SDRAM is 0x0C000000. + * + * NOTE: This address must match with the definition of + *TEXT_BASE in config.mk (in this directory). + */ + + . = 0x0C000000 + (8*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh2/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/samsung/smdk6400/.gitignore b/board/samsung/smdk6400/.gitignore new file mode 100644 index 0000000000..25ab492c50 --- /dev/null +++ b/board/samsung/smdk6400/.gitignore @@ -0,0 +1,5 @@ +# +# Generated files +# + +/config.tmp diff --git a/board/samsung/smdk6400/Makefile b/board/samsung/smdk6400/Makefile new file mode 100644 index 0000000000..71302205eb --- /dev/null +++ b/board/samsung/smdk6400/Makefile @@ -0,0 +1,54 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := smdk6400.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk new file mode 100644 index 0000000000..298d387ae7 --- /dev/null +++ b/board/samsung/smdk6400/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu +# +# see http://www.samsung.com/ for more information on SAMSUNG + +# On SMDK6400 we use the 64 MB SDRAM bank at +# +# 0x50000000 to 0x58000000 +# +# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000 +# +# we load ourselves to 0x57e00000 without MMU +# with MMU, load address is changed to 0xc7e00000 +# +# download area is 0x5000c000 + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef CONFIG_NAND_SPL +TEXT_BASE = $(RAM_TEXT) +else +TEXT_BASE = 0 +endif diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S new file mode 100644 index 0000000000..034c810f7b --- /dev/null +++ b/board/samsung/smdk6400/lowlevel_init.S @@ -0,0 +1,316 @@ +/* + * Memory Setup stuff - taken from blob memsetup.S + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and + * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl) + * + * Modified for the Samsung SMDK2410 by + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> + +#include <s3c6400.h> + +#ifdef CONFIG_SERIAL1 +#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) +#elif defined(CONFIG_SERIAL2) +#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET) +#else +#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET) +#endif + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r12, lr + + /* LED on only #8 */ + ldr r0, =ELFIN_GPIO_BASE + ldr r1, =0x55540000 + str r1, [r0, #GPNCON_OFFSET] + + ldr r1, =0x55555555 + str r1, [r0, #GPNPUD_OFFSET] + + ldr r1, =0xf000 + str r1, [r0, #GPNDAT_OFFSET] + + /* Disable Watchdog */ + ldr r0, =0x7e000000 @0x7e004000 + orr r0, r0, #0x4000 + mov r1, #0 + str r1, [r0] + + /* External interrupt pending clear */ + ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/ + ldr r1, [r0] + str r1, [r0] + + ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000 + ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000 + + /* Disable all interrupts (VIC0 and VIC1) */ + mvn r3, #0x0 + str r3, [r0, #oINTMSK] + str r3, [r1, #oINTMSK] + + /* Set all interrupts as IRQ */ + mov r3, #0x0 + str r3, [r0, #oINTMOD] + str r3, [r1, #oINTMOD] + + /* Pending Interrupt Clear */ + mov r3, #0x0 + str r3, [r0, #oVECTADDR] + str r3, [r1, #oVECTADDR] + + /* init system clock */ + bl system_clock_init + +#ifndef CONFIG_NAND_SPL + /* for UART */ + bl uart_asm_init +#endif + +#ifdef CONFIG_BOOT_NAND + /* simple init for NAND */ + bl nand_asm_init +#endif + + bl mem_ctrl_asm_init + +/* Wakeup support. Don't know if it's going to be used, untested. */ + ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset + +1: + mov lr, r12 + mov pc, lr + +wakeup_reset: + + /* Clear wakeup status register */ + ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) + ldr r1, [r0] + str r1, [r0] + + /* LED test */ + ldr r0, =ELFIN_GPIO_BASE + ldr r1, =0x3000 + str r1, [r0, #GPNDAT_OFFSET] + + /* Load return address and jump to kernel */ + ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) + /* r1 = physical address of s3c6400_cpu_resume function */ + ldr r1, [r0] + /* Jump to kernel (sleep-s3c6400.S) */ + mov pc, r1 + nop + nop +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */ + +#ifdef CONFIG_SYNC_MODE + ldr r1, [r0, #OTHERS_OFFSET] + mov r2, #0x40 + orr r1, r1, r2 + str r1, [r0, #OTHERS_OFFSET] + + nop + nop + nop + nop + nop + + ldr r2, =0x80 + orr r1, r1, r2 + str r1, [r0, #OTHERS_OFFSET] + +check_syncack: + ldr r1, [r0, #OTHERS_OFFSET] + ldr r2, =0xf00 + and r1, r1, r2 + cmp r1, #0xf00 + bne check_syncack +#else /* ASYNC Mode */ + nop + nop + nop + nop + nop + + /* + * This was unconditional in original Samsung sources, but it doesn't + * seem to make much sense on S3C6400. + */ +#ifndef CONFIG_S3C6400 + ldr r1, [r0, #OTHERS_OFFSET] + bic r1, r1, #0xC0 + orr r1, r1, #0x40 + str r1, [r0, #OTHERS_OFFSET] + +wait_for_async: + ldr r1, [r0, #OTHERS_OFFSET] + and r1, r1, #0xf00 + cmp r1, #0x0 + bne wait_for_async +#endif + + ldr r1, [r0, #OTHERS_OFFSET] + bic r1, r1, #0x40 + str r1, [r0, #OTHERS_OFFSET] +#endif + + mov r1, #0xff00 + orr r1, r1, #0xff + str r1, [r0, #APLL_LOCK_OFFSET] + str r1, [r0, #MPLL_LOCK_OFFSET] + + /* Set Clock Divider */ + ldr r1, [r0, #CLK_DIV0_OFFSET] + bic r1, r1, #0x30000 + bic r1, r1, #0xff00 + bic r1, r1, #0xff + ldr r2, =CLK_DIV_VAL + orr r1, r1, r2 + str r1, [r0, #CLK_DIV0_OFFSET] + + ldr r1, =APLL_VAL + str r1, [r0, #APLL_CON_OFFSET] + ldr r1, =MPLL_VAL + str r1, [r0, #MPLL_CON_OFFSET] + + /* FOUT of EPLL is 96MHz */ + ldr r1, =0x200203 + str r1, [r0, #EPLL_CON0_OFFSET] + ldr r1, =0x0 + str r1, [r0, #EPLL_CON1_OFFSET] + + /* APLL, MPLL, EPLL select to Fout */ + ldr r1, [r0, #CLK_SRC_OFFSET] + orr r1, r1, #0x7 + str r1, [r0, #CLK_SRC_OFFSET] + + /* wait at least 200us to stablize all clock */ + mov r1, #0x10000 +1: subs r1, r1, #1 + bne 1b + + /* Synchronization for VIC port */ +#if defined(CONFIG_SYNC_MODE) + ldr r1, [r0, #OTHERS_OFFSET] + orr r1, r1, #0x20 + str r1, [r0, #OTHERS_OFFSET] +#elif !defined(CONFIG_S3C6400) + /* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */ + ldr r1, [r0, #OTHERS_OFFSET] + bic r1, r1, #0x20 + str r1, [r0, #OTHERS_OFFSET] +#endif + mov pc, lr + + +#ifndef CONFIG_NAND_SPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + /* set GPIO to enable UART */ + ldr r0, =ELFIN_GPIO_BASE + ldr r1, =0x220022 + str r1, [r0, #GPACON_OFFSET] + mov pc, lr +#endif + +#ifdef CONFIG_BOOT_NAND +/* + * NAND Interface init for SMDK6400 + */ +nand_asm_init: + ldr r0, =ELFIN_NAND_BASE + ldr r1, [r0, #NFCONF_OFFSET] + orr r1, r1, #0x70 + orr r1, r1, #0x7700 + str r1, [r0, #NFCONF_OFFSET] + + ldr r1, [r0, #NFCONT_OFFSET] + orr r1, r1, #0x07 + str r1, [r0, #NFCONT_OFFSET] + + mov pc, lr +#endif + +#ifdef CONFIG_ENABLE_MMU +/* + * MMU Table for SMDK6400 + */ + + /* form a first-level section entry */ +.macro FL_SECTION_ENTRY base,ap,d,c,b + .word (\base << 20) | (\ap << 10) | \ + (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1) +.endm + +.section .mmudata, "a" + .align 14 + /* the following alignment creates the mmu table at address 0x4000. */ + .globl mmu_table +mmu_table: + .set __base, 0 + /* 1:1 mapping for debugging */ + .rept 0xA00 + FL_SECTION_ENTRY __base, 3, 0, 0, 0 + .set __base, __base + 1 + .endr + + /* access is not allowed. */ + .rept 0xC00 - 0xA00 + .word 0x00000000 + .endr + + /* 128MB for SDRAM 0xC0000000 -> 0x50000000 */ + .set __base, 0x500 + .rept 0xC80 - 0xC00 + FL_SECTION_ENTRY __base, 3, 0, 1, 1 + .set __base, __base + 1 + .endr + + /* access is not allowed. */ + .rept 0x1000 - 0xc80 + .word 0x00000000 + .endr +#endif diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c new file mode 100644 index 0000000000..77fd2c8a21 --- /dev/null +++ b/board/samsung/smdk6400/smdk6400.c @@ -0,0 +1,130 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <s3c6400.h> + +/* ------------------------------------------------------------------------- */ +#define CS8900_Tacs 0x0 /* 0clk address set-up */ +#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */ +#define CS8900_Tacc 0xE /* 14clk access cycle */ +#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */ +#define CS8900_Tah 0x4 /* 4clk address holding time */ +#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */ +#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */ + +static inline void delay(unsigned long loops) +{ + __asm__ volatile ("1:\n" "subs %0, %1, #1\n" + "bne 1b" + : "=r" (loops) : "0" (loops)); +} + +/* + * Miscellaneous platform dependent initialisations + */ + +static void cs8900_pre_init(void) +{ + SROM_BW_REG &= ~(0xf << 4); + SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4); + SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) + + (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) + + (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC); +} + +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + cs8900_pre_init(); + + /* NOR-flash in SROM0 */ + + /* Enable WAIT */ + SROM_BW_REG |= 4 | 8 | 1; + + gd->bd->bi_arch_number = MACH_TYPE; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board: SMDK6400\n"); + return 0; +} +#endif + +#ifdef CONFIG_ENABLE_MMU +ulong virt_to_phy_smdk6400(ulong addr) +{ + if ((0xc0000000 <= addr) && (addr < 0xc8000000)) + return addr - 0xc0000000 + 0x50000000; + else + printf("do not support this address : %08lx\n", addr); + + return addr; +} +#endif + +#if defined(CONFIG_CMD_NAND) && defined(CFG_NAND_LEGACY) +#include <linux/mtd/nand.h> +extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; +void nand_init(void) +{ + nand_probe(CFG_NAND_BASE); + if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) + print_size(nand_dev_desc[0].totlen, "\n"); +} +#endif + +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_16BIT; + info->chipwidth = FLASH_CFI_BY16; + info->interface = FLASH_CFI_X16; + return 1; + } else + return 0; +} diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds new file mode 100644 index 0000000000..132ab21ff9 --- /dev/null +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm1176/start.o (.text) + cpu/arm1176/s3c64xx/cpu_init.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + .mmudata : { *(.mmudata) } + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/sh7785lcr/Makefile b/board/sh7785lcr/Makefile new file mode 100644 index 0000000000..b1b538c9d8 --- /dev/null +++ b/board/sh7785lcr/Makefile @@ -0,0 +1,42 @@ +# +# Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o +SOBJS := lowlevel_init.o + +$(LIB): $(obj).depend $(COBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(COBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/sh7785lcr/config.mk b/board/sh7785lcr/config.mk new file mode 100644 index 0000000000..93761eec87 --- /dev/null +++ b/board/sh7785lcr/config.mk @@ -0,0 +1,26 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# +TEXT_BASE = 0x0ff80000 + diff --git a/board/sh7785lcr/lowlevel_init.S b/board/sh7785lcr/lowlevel_init.S new file mode 100644 index 0000000000..8126296e5b --- /dev/null +++ b/board/sh7785lcr/lowlevel_init.S @@ -0,0 +1,318 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +.macro write32, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.l r0, @r1 +.endm + +.macro write16, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.w r0, @r1 +.endm + +.macro write8, addr, data + mov.l \addr ,r1 + mov.l \data ,r0 + mov.b r0, @r1 +.endm + +.macro wait_timer, time + mov.l \time ,r3 +1: + nop + tst r3, r3 + bf/s 1b + dt r3 +.endm + +#include <asm/processor.h> + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + wait_timer WAIT_200US + wait_timer WAIT_200US + + /*------- LBSC -------*/ + write32 MMSELR_A, MMSELR_D + + /*------- DBSC2 -------*/ + write32 DBSC2_DBCONF_A, DBSC2_DBCONF_D + write32 DBSC2_DBTR0_A, DBSC2_DBTR0_D + write32 DBSC2_DBTR1_A, DBSC2_DBTR1_D + write32 DBSC2_DBTR2_A, DBSC2_DBTR2_D + write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D1 + write32 DBSC2_DBFREQ_A, DBSC2_DBFREQ_D2 + wait_timer WAIT_200US + + write32 DBSC2_DBDICODTOCD_A, DBSC2_DBDICODTOCD_D + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_CKE_H + wait_timer WAIT_200US + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS2 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS3 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_1 + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_PALL + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF + write32 DBSC2_DBCMDCNT_A, DBSC2_DBCMDCNT_D_REF + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_MRS_2 + wait_timer WAIT_200US + + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_2 + write32 DBSC2_DBMRCNT_A, DBSC2_DBMRCNT_D_EMRS1_1 + + write32 DBSC2_DBEN_A, DBSC2_DBEN_D + write32 DBSC2_DBRFCNT1_A, DBSC2_DBRFCNT1_D + write32 DBSC2_DBRFCNT2_A, DBSC2_DBRFCNT2_D + write32 DBSC2_DBRFCNT0_A, DBSC2_DBRFCNT0_D + wait_timer WAIT_200US + + /*------- GPIO -------*/ + write16 PACR_A, PACR_D + write16 PBCR_A, PBCR_D + write16 PCCR_A, PCCR_D + write16 PDCR_A, PDCR_D + write16 PECR_A, PECR_D + write16 PFCR_A, PFCR_D + write16 PGCR_A, PGCR_D + write16 PHCR_A, PHCR_D + write16 PJCR_A, PJCR_D + write16 PKCR_A, PKCR_D + write16 PLCR_A, PLCR_D + write16 PMCR_A, PMCR_D + write16 PNCR_A, PNCR_D + write16 PPCR_A, PPCR_D + write16 PQCR_A, PQCR_D + write16 PRCR_A, PRCR_D + + write8 PEPUPR_A, PEPUPR_D + write8 PHPUPR_A, PHPUPR_D + write8 PJPUPR_A, PJPUPR_D + write8 PKPUPR_A, PKPUPR_D + write8 PLPUPR_A, PLPUPR_D + write8 PMPUPR_A, PMPUPR_D + write8 PNPUPR_A, PNPUPR_D + write16 PPUPR1_A, PPUPR1_D + write16 PPUPR2_A, PPUPR2_D + write16 P1MSELR_A, P1MSELR_D + write16 P2MSELR_A, P2MSELR_D + + /*------- LBSC -------*/ + write32 BCR_A, BCR_D + write32 CS0BCR_A, CS0BCR_D + write32 CS0WCR_A, CS0WCR_D + write32 CS1BCR_A, CS1BCR_D + write32 CS1WCR_A, CS1WCR_D + write32 CS4BCR_A, CS4BCR_D + write32 CS4WCR_A, CS4WCR_D + + mov.l PASCR_A, r0 + mov.l @r0, r2 + mov.l PASCR_32BIT_MODE, r1 + tst r1, r2 + bt lbsc_29bit + + write32 CS2BCR_A, CS_USB_BCR_D + write32 CS2WCR_A, CS_USB_WCR_D + write32 CS3BCR_A, CS_SD_BCR_D + write32 CS3WCR_A, CS_SD_WCR_D + write32 CS5BCR_A, CS_I2C_BCR_D + write32 CS5WCR_A, CS_I2C_WCR_D + write32 CS6BCR_A, CS0BCR_D + write32 CS6WCR_A, CS0WCR_D + bra lbsc_end + nop + +lbsc_29bit: + write32 CS5BCR_A, CS_USB_BCR_D + write32 CS5WCR_A, CS_USB_WCR_D + write32 CS6BCR_A, CS_SD_BCR_D + write32 CS6WCR_A, CS_SD_WCR_D + +lbsc_end: + + write32 CCR_A, CCR_D + + rts + nop + + .align 4 + +/*------- LBSC -------*/ +MMSELR_A: .long 0xfc400020 +MMSELR_D: .long 0xa5a50002 + +/*------- DBSC2 -------*/ +#define DBSC2_BASE 0xfe800000 +DBSC2_DBSTATE_A: .long DBSC2_BASE + 0x0c +DBSC2_DBEN_A: .long DBSC2_BASE + 0x10 +DBSC2_DBCMDCNT_A: .long DBSC2_BASE + 0x14 +DBSC2_DBCONF_A: .long DBSC2_BASE + 0x20 +DBSC2_DBTR0_A: .long DBSC2_BASE + 0x30 +DBSC2_DBTR1_A: .long DBSC2_BASE + 0x34 +DBSC2_DBTR2_A: .long DBSC2_BASE + 0x38 +DBSC2_DBRFCNT0_A: .long DBSC2_BASE + 0x40 +DBSC2_DBRFCNT1_A: .long DBSC2_BASE + 0x44 +DBSC2_DBRFCNT2_A: .long DBSC2_BASE + 0x48 +DBSC2_DBRFSTS_A: .long DBSC2_BASE + 0x4c +DBSC2_DBFREQ_A: .long DBSC2_BASE + 0x50 +DBSC2_DBDICODTOCD_A: .long DBSC2_BASE + 0x54 +DBSC2_DBMRCNT_A: .long DBSC2_BASE + 0x60 +DDR_DUMMY_ACCESS_A: .long 0x40000000 + +DBSC2_DBCONF_D: .long 0x00630002 +DBSC2_DBTR0_D: .long 0x050b1f04 +DBSC2_DBTR1_D: .long 0x00040204 +DBSC2_DBTR2_D: .long 0x02100308 +DBSC2_DBFREQ_D1: .long 0x00000000 +DBSC2_DBFREQ_D2: .long 0x00000100 +DBSC2_DBDICODTOCD_D: .long 0x000f0907 + +DBSC2_DBCMDCNT_D_CKE_H: .long 0x00000003 +DBSC2_DBCMDCNT_D_PALL: .long 0x00000002 +DBSC2_DBCMDCNT_D_REF: .long 0x00000004 + +DBSC2_DBMRCNT_D_EMRS2: .long 0x00020000 +DBSC2_DBMRCNT_D_EMRS3: .long 0x00030000 +DBSC2_DBMRCNT_D_EMRS1_1: .long 0x00010006 +DBSC2_DBMRCNT_D_EMRS1_2: .long 0x00010386 +DBSC2_DBMRCNT_D_MRS_1: .long 0x00000952 +DBSC2_DBMRCNT_D_MRS_2: .long 0x00000852 + +DBSC2_DBEN_D: .long 0x00000001 + +DBSC2_DBPDCNT0_D3: .long 0x00000080 +DBSC2_DBRFCNT1_D: .long 0x00000926 +DBSC2_DBRFCNT2_D: .long 0x00fe00fe +DBSC2_DBRFCNT0_D: .long 0x00010000 + +WAIT_200US: .long 33333 + +/*------- GPIO -------*/ +#define GPIO_BASE 0xffe70000 +PACR_A: .long GPIO_BASE + 0x00 +PBCR_A: .long GPIO_BASE + 0x02 +PCCR_A: .long GPIO_BASE + 0x04 +PDCR_A: .long GPIO_BASE + 0x06 +PECR_A: .long GPIO_BASE + 0x08 +PFCR_A: .long GPIO_BASE + 0x0a +PGCR_A: .long GPIO_BASE + 0x0c +PHCR_A: .long GPIO_BASE + 0x0e +PJCR_A: .long GPIO_BASE + 0x10 +PKCR_A: .long GPIO_BASE + 0x12 +PLCR_A: .long GPIO_BASE + 0x14 +PMCR_A: .long GPIO_BASE + 0x16 +PNCR_A: .long GPIO_BASE + 0x18 +PPCR_A: .long GPIO_BASE + 0x1a +PQCR_A: .long GPIO_BASE + 0x1c +PRCR_A: .long GPIO_BASE + 0x1e +PEPUPR_A: .long GPIO_BASE + 0x48 +PHPUPR_A: .long GPIO_BASE + 0x4e +PJPUPR_A: .long GPIO_BASE + 0x50 +PKPUPR_A: .long GPIO_BASE + 0x52 +PLPUPR_A: .long GPIO_BASE + 0x54 +PMPUPR_A: .long GPIO_BASE + 0x56 +PNPUPR_A: .long GPIO_BASE + 0x58 +PPUPR1_A: .long GPIO_BASE + 0x60 +PPUPR2_A: .long GPIO_BASE + 0x62 +P1MSELR_A: .long GPIO_BASE + 0x80 +P2MSELR_A: .long GPIO_BASE + 0x82 + +PACR_D: .long 0x0000 +PBCR_D: .long 0x0000 +PCCR_D: .long 0x0000 +PDCR_D: .long 0x0000 +PECR_D: .long 0x0000 +PFCR_D: .long 0x0000 +PGCR_D: .long 0x0000 +PHCR_D: .long 0x00c0 +PJCR_D: .long 0xc3fc +PKCR_D: .long 0x03ff +PLCR_D: .long 0x0000 +PMCR_D: .long 0xffff +PNCR_D: .long 0xf0c3 +PPCR_D: .long 0x0000 +PQCR_D: .long 0x0000 +PRCR_D: .long 0x0000 + +PEPUPR_D: .long 0xff +PHPUPR_D: .long 0x00 +PJPUPR_D: .long 0x00 +PKPUPR_D: .long 0x00 +PLPUPR_D: .long 0x00 +PMPUPR_D: .long 0xfc +PNPUPR_D: .long 0x00 +PPUPR1_D: .long 0xffbf +PPUPR2_D: .long 0xff00 +P1MSELR_D: .long 0x3780 +P2MSELR_D: .long 0x0000 + +/*------- LBSC -------*/ +PASCR_A: .long 0xff000070 +PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */ + +BCR_A: .long BCR +CS0BCR_A: .long CS0BCR +CS0WCR_A: .long CS0WCR +CS1BCR_A: .long CS1BCR +CS1WCR_A: .long CS1WCR +CS2BCR_A: .long CS2BCR +CS2WCR_A: .long CS2WCR +CS3BCR_A: .long CS3BCR +CS3WCR_A: .long CS3WCR +CS4BCR_A: .long CS4BCR +CS4WCR_A: .long CS4WCR +CS5BCR_A: .long CS5BCR +CS5WCR_A: .long CS5WCR +CS6BCR_A: .long CS6BCR +CS6WCR_A: .long CS6WCR + +BCR_D: .long 0x80000003 +CS0BCR_D: .long 0x22222340 +CS0WCR_D: .long 0x00111118 +CS1BCR_D: .long 0x11111100 +CS1WCR_D: .long 0x33333303 +CS4BCR_D: .long 0x11111300 +CS4WCR_D: .long 0x00101012 + +/* USB setting : 32bit mode = CS2, 29bit mode = CS5 */ +CS_USB_BCR_D: .long 0x11111200 +CS_USB_WCR_D: .long 0x00020004 + +/* SD setting : 32bit mode = CS3, 29bit mode = CS6 */ +CS_SD_BCR_D: .long 0x00000300 +CS_SD_WCR_D: .long 0x00030108 + +/* I2C setting : 32bit mode = CS5, 29bit mode = CS1(already setting) */ +CS_I2C_BCR_D: .long 0x11111100 +CS_I2C_WCR_D: .long 0x00000003 + +CCR_A: .long 0xff00001c +CCR_D: .long 0x0000090b + diff --git a/board/sh7785lcr/rtl8169.h b/board/sh7785lcr/rtl8169.h new file mode 100644 index 0000000000..d1c0d64b1d --- /dev/null +++ b/board/sh7785lcr/rtl8169.h @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define PCIREG_8(_adr) (*(volatile unsigned char *)(_adr)) +#define PCIREG_32(_adr) (*(volatile unsigned long *)(_adr)) +#define PCI_PAR PCIREG_32(0xfe0401c0) +#define PCI_PDR PCIREG_32(0xfe040220) +#define PCI_CR PCIREG_32(0xfe040100) +#define PCI_CONF1 PCIREG_32(0xfe040004) + +#define HIGH 1 +#define LOW 0 + +#define PCI_PROG 0x80 +#define PCI_EEP_ADDRESS (unsigned short)0x0007 +#define PCI_MAC_ADDRESS_SIZE 3 + +#define TIME1 100 +#define TIME2 20000 + +#define BIT_DUMMY 0 +#define MAC_EEP_READ 1 +#define MAC_EEP_WRITE 2 +#define MAC_EEP_ERACE 3 +#define MAC_EEP_EWEN 4 +#define MAC_EEP_EWDS 5 + +/* RTL8169 */ +const unsigned short EEPROM_W_Data_8169_A[] = { + 0x8129, 0x10ec, 0x8169, 0x1154, 0x032b, + 0x4020, 0xa101 +}; +const unsigned short EEPROM_W_Data_8169_B[] = { + 0x4d15, 0xf7c2, 0x8000, 0x0000, 0x0000, 0x1300, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x2000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 +}; + diff --git a/board/sh7785lcr/rtl8169_mac.c b/board/sh7785lcr/rtl8169_mac.c new file mode 100644 index 0000000000..2bc873bd16 --- /dev/null +++ b/board/sh7785lcr/rtl8169_mac.c @@ -0,0 +1,349 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include "rtl8169.h" + +static unsigned char *PCI_MEMR; + +static void mac_delay(unsigned int cnt) +{ + udelay(cnt); +} + +static void mac_pci_setup(void) +{ + unsigned long pci_data; + + PCI_PAR = 0x00000010; + PCI_PDR = 0x00001000; + PCI_PAR = 0x00000004; + pci_data = PCI_PDR; + PCI_PDR = pci_data | 0x00000007; + PCI_PAR = 0x00000010; + + PCI_MEMR = (unsigned char *)((PCI_PDR | 0xFE240050) & 0xFFFFFFF0); +} + +static void EECS(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x08; + else + *PCI_MEMR = data & 0xf7; +} + +static void EECLK(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x04; + else + *PCI_MEMR = data & 0xfb; +} + +static void EEDI(int level) +{ + unsigned char data = *PCI_MEMR; + + if (level) + *PCI_MEMR = data | 0x02; + else + *PCI_MEMR = data & 0xfd; +} + +static inline void sh7785lcr_bitset(unsigned short bit) +{ + if (bit) + EEDI(HIGH); + else + EEDI(LOW); + + EECLK(LOW); + mac_delay(TIME1); + EECLK(HIGH); + mac_delay(TIME1); + EEDI(LOW); +} + +static inline unsigned char sh7785lcr_bitget(void) +{ + unsigned char bit; + + EECLK(LOW); + mac_delay(TIME1); + bit = *PCI_MEMR & 0x01; + EECLK(HIGH); + mac_delay(TIME1); + + return bit; +} + +static inline void sh7785lcr_setcmd(unsigned char command) +{ + sh7785lcr_bitset(BIT_DUMMY); + switch (command) { + case MAC_EEP_READ: + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + break; + case MAC_EEP_WRITE: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(1); + break; + case MAC_EEP_ERACE: + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + break; + case MAC_EEP_EWEN: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(0); + break; + case MAC_EEP_EWDS: + sh7785lcr_bitset(1); + sh7785lcr_bitset(0); + sh7785lcr_bitset(0); + break; + default: + break; + } +} + +static inline unsigned short sh7785lcr_getdt(void) +{ + unsigned short data = 0; + int i; + + sh7785lcr_bitget(); /* DUMMY */ + for (i = 0 ; i < 16 ; i++) { + data <<= 1; + data |= sh7785lcr_bitget(); + } + return data; +} + +static inline void sh7785lcr_setadd(unsigned short address) +{ + sh7785lcr_bitset(address & 0x0020); /* A5 */ + sh7785lcr_bitset(address & 0x0010); /* A4 */ + sh7785lcr_bitset(address & 0x0008); /* A3 */ + sh7785lcr_bitset(address & 0x0004); /* A2 */ + sh7785lcr_bitset(address & 0x0002); /* A1 */ + sh7785lcr_bitset(address & 0x0001); /* A0 */ +} + +static inline void sh7785lcr_setdata(unsigned short data) +{ + sh7785lcr_bitset(data & 0x8000); + sh7785lcr_bitset(data & 0x4000); + sh7785lcr_bitset(data & 0x2000); + sh7785lcr_bitset(data & 0x1000); + sh7785lcr_bitset(data & 0x0800); + sh7785lcr_bitset(data & 0x0400); + sh7785lcr_bitset(data & 0x0200); + sh7785lcr_bitset(data & 0x0100); + sh7785lcr_bitset(data & 0x0080); + sh7785lcr_bitset(data & 0x0040); + sh7785lcr_bitset(data & 0x0020); + sh7785lcr_bitset(data & 0x0010); + sh7785lcr_bitset(data & 0x0008); + sh7785lcr_bitset(data & 0x0004); + sh7785lcr_bitset(data & 0x0002); + sh7785lcr_bitset(data & 0x0001); +} + +static void sh7785lcr_datawrite(const unsigned short *data, unsigned short address, + unsigned int count) +{ + unsigned int i; + + for (i = 0; i < count; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + + sh7785lcr_setcmd(MAC_EEP_WRITE); + sh7785lcr_setadd(address++); + sh7785lcr_setdata(*(data + i)); + + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + mac_delay(TIME2); + } +} + +static void sh7785lcr_macerase(void) +{ + unsigned int i; + unsigned short pci_address = 7; + + for (i = 0; i < 3; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + sh7785lcr_setcmd(MAC_EEP_ERACE); + sh7785lcr_setadd(pci_address++); + mac_delay(TIME1); + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + } + + mac_delay(TIME2); + + printf("\n\nErace End\n"); + for (i = 0; i < 10; i++) + mac_delay(TIME2); +} + +static void sh7785lcr_macwrite(unsigned short *data) +{ + sh7785lcr_macerase(); + + sh7785lcr_datawrite(EEPROM_W_Data_8169_A, 0x0000, 7); + sh7785lcr_datawrite(data, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); + sh7785lcr_datawrite(EEPROM_W_Data_8169_B, 0x000a, 54); +} + +void sh7785lcr_macdtrd(unsigned char *buf, unsigned short address, unsigned int count) +{ + unsigned int i; + unsigned short wk; + + for (i = 0 ; i < count; i++) { + EECS(HIGH); + EEDI(LOW); + mac_delay(TIME1); + sh7785lcr_setcmd(MAC_EEP_READ); + sh7785lcr_setadd(address++); + wk = sh7785lcr_getdt(); + + *buf++ = (unsigned char)(wk & 0xff); + *buf++ = (unsigned char)((wk >> 8) & 0xff); + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + } +} + +static void sh7785lcr_macadrd(unsigned char *buf) +{ + *PCI_MEMR = PCI_PROG; + + sh7785lcr_macdtrd(buf, PCI_EEP_ADDRESS, PCI_MAC_ADDRESS_SIZE); +} + +static void sh7785lcr_eepewen(void) +{ + *PCI_MEMR = PCI_PROG; + mac_delay(TIME1); + EECS(LOW); + EECLK(LOW); + EEDI(LOW); + EECS(HIGH); + mac_delay(TIME1); + + sh7785lcr_setcmd(MAC_EEP_EWEN); + sh7785lcr_bitset(1); + sh7785lcr_bitset(1); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + sh7785lcr_bitset(BIT_DUMMY); + + EECLK(LOW); + EEDI(LOW); + EECS(LOW); + mac_delay(TIME1); +} + +void mac_write(unsigned short *data) +{ + mac_pci_setup(); + sh7785lcr_eepewen(); + sh7785lcr_macwrite(data); +} + +void mac_read(void) +{ + unsigned char data[6]; + + mac_pci_setup(); + sh7785lcr_macadrd(data); + printf("Mac = %02x:%02x:%02x:%02x:%02x:%02x\n", + data[0], data[1], data[2], data[3], data[4], data[5]); +} + +int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + unsigned char mac[6]; + char *s, *e; + + if (argc != 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + s = argv[1]; + + for (i = 0; i < 6; i++) { + mac[i] = s ? simple_strtoul(s, &e, 16) : 0; + if (s) + s = (*e) ? e + 1 : e; + } + mac_write((unsigned short *)mac); + + return 0; +} + +U_BOOT_CMD( + setmac, 2, 1, do_set_mac, + "setmac - write MAC address for RTL8110SCL\n", + "\n" + "setmac <mac address> - write MAC address for RTL8110SCL\n" +); + +int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + if (argc != 1) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + mac_read(); + + return 0; +} + +U_BOOT_CMD( + printmac, 1, 1, do_print_mac, + "printmac - print MAC address for RTL8110\n", + "\n" + " - print MAC address for RTL8110\n" +); + diff --git a/board/sh7785lcr/selfcheck.c b/board/sh7785lcr/selfcheck.c new file mode 100644 index 0000000000..9c228e5f6d --- /dev/null +++ b/board/sh7785lcr/selfcheck.c @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/pci.h> + +#if defined(CONFIG_CPU_32BIT) +#define NOCACHE_OFFSET 0x00000000 +#else +#define NOCACHE_OFFSET 0xa0000000 +#endif +#define PLD_LEDCR (0x04000008 + NOCACHE_OFFSET) +#define PLD_SWSR (0x0400000a + NOCACHE_OFFSET) +#define PLD_VERSR (0x0400000c + NOCACHE_OFFSET) + +#define SM107_DEVICEID (0x13e00060 + NOCACHE_OFFSET) + +static void wait_ms(unsigned long time) +{ + while (time--) + udelay(1000); +} + +static void test_pld(void) +{ + printf("PLD version = %04x\n", readb(PLD_VERSR)); +} + +static void test_sm107(void) +{ + printf("SM107 device ID = %04x\n", readl(SM107_DEVICEID)); +} + +static void test_led(void) +{ + printf("turn on LEDs 3, 5, 7, 9\n"); + writeb(0x55, PLD_LEDCR); + wait_ms(2000); + printf("turn on LEDs 4, 6, 8, 10\n"); + writeb(0xaa, PLD_LEDCR); + wait_ms(2000); + writeb(0x00, PLD_LEDCR); +} + +static void test_dipsw(void) +{ + printf("Please DIPSW set = B'0101\n"); + while (readb(PLD_SWSR) != 0x05) { + if (ctrlc()) + return; + } + printf("Please DIPSW set = B'1010\n"); + while (readb(PLD_SWSR) != 0x0A) { + if (ctrlc()) + return; + } + printf("DIPSW OK\n"); +} + +static void test_net(void) +{ + unsigned long data; + + writel(0x80000000, 0xfe0401c0); + data = readl(0xfe040220); + if (data == 0x816910ec) + printf("Ethernet OK\n"); + else + printf("Ethernet NG, data = %08x\n", data); +} + +static void test_sata(void) +{ + unsigned long data; + + writel(0x80000800, 0xfe0401c0); + data = readl(0xfe040220); + if (data == 0x35121095) + printf("SATA OK\n"); + else + printf("SATA NG, data = %08x\n", data); +} + +static void test_pci(void) +{ + writel(0x80001800, 0xfe0401c0); + printf("PCI CN1 ID = %08x\n", readl(0xfe040220)); + + writel(0x80001000, 0xfe0401c0); + printf("PCI CN2 ID = %08x\n", readl(0xfe040220)); +} + +int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char *cmd; + + if (argc != 2) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + cmd = argv[1]; + switch (cmd[0]) { + case 'a': /* all */ + test_pld(); + test_led(); + test_dipsw(); + test_sm107(); + test_net(); + test_sata(); + test_pci(); + break; + case 'p': /* pld or pci */ + if (cmd[1] == 'l') + test_pld(); + else + test_pci(); + break; + case 'l': /* led */ + test_led(); + break; + case 'd': /* dipsw */ + test_dipsw(); + break; + case 's': /* sm107 or sata */ + if (cmd[1] == 'm') + test_sm107(); + else + test_sata(); + break; + case 'n': /* net */ + test_net(); + break; + default: + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + return 0; +} + +U_BOOT_CMD( + hwtest, 2, 1, do_hw_test, + "hwtest - hardware test for R0P7785LC0011RL board\n", + "\n" + "hwtest all - test all hardware\n" + "hwtest pld - output PLD version\n" + "hwtest led - turn on LEDs\n" + "hwtest dipsw - test DIP switch\n" + "hwtest sm107 - output SM107 version\n" + "hwtest net - check RTL8110 ID\n" + "hwtest sata - check SiI3512 ID\n" + "hwtest pci - output PCI slot device ID\n" +); + diff --git a/board/sh7785lcr/sh7785lcr.c b/board/sh7785lcr/sh7785lcr.c new file mode 100644 index 0000000000..5b9c403746 --- /dev/null +++ b/board/sh7785lcr/sh7785lcr.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/pci.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Technology Corp. R0P7785LC0011RL\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7780_init(&hose); +} + diff --git a/board/sh7785lcr/u-boot.lds b/board/sh7785lcr/u-boot.lds new file mode 100644 index 0000000000..f0109eb24f --- /dev/null +++ b/board/sh7785lcr/u-boot.lds @@ -0,0 +1,97 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/cpu/arm1176/Makefile b/cpu/arm1176/Makefile new file mode 100644 index 0000000000..1ca9199a64 --- /dev/null +++ b/cpu/arm1176/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o +COBJS = cpu.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm1176/config.mk b/cpu/arm1176/config.mk new file mode 100644 index 0000000000..5083594253 --- /dev/null +++ b/cpu/arm1176/config.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v6. +PLATFORM_CPPFLAGS += -march=armv5t +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_CPPFLAGS +=$(call cc-option,-mno-thumb-interwork,) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c new file mode 100644 index 0000000000..1e94f7d6d0 --- /dev/null +++ b/cpu/arm1176/cpu.c @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2004 Texas Insturments + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include <common.h> +#include <command.h> +#include <s3c6400.h> + +static void cache_flush (void); + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1 (void) +{ + unsigned long value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1 (unsigned long value) +{ + __asm__ __volatile__( + "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" + : + : "r" (value) + : "memory"); + + read_p15_c1(); +} + +static void cp_delay (void) +{ + volatile int i; + + /* Many OMAP regs need at least 2 nops */ + for (i = 0; i < 100; i++) + __asm__ __volatile__("nop\n"); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1 << 0) /* mmu off/on */ +#define C1_ALIGN (1 << 1) /* alignment faults off/on */ +#define C1_DC (1 << 2) /* dcache off/on */ +#define C1_WB (1 << 3) /* merging write buffer on/off */ +#define C1_BIG_ENDIAN (1 << 7) /* big endian off/on */ +#define C1_SYS_PROT (1 << 8) /* system protection */ +#define C1_ROM_PROT (1 << 9) /* ROM protection */ +#define C1_IC (1 << 12) /* icache off/on */ +#define C1_HIGH_VECTORS (1 << 13) /* location of vectors: low/high */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init (void) +{ + return 0; +} + +int cleanup_before_linux (void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + + disable_interrupts (); + + /* turn off I/D-cache */ + icache_disable(); + dcache_disable(); + cache_flush(); + + return 0; +} + + +/* * reset the cpu by setting up the watchdog timer and let him time out */ +void reset_cpu (ulong ignored) +{ + printf("reset... \n\n\n"); + SW_RST_REG = 0x6400; + /* loop forever and wait for reset to happen */ + while (1) { + if (serial_tstc()) { + serial_getc(); + break; + } + } + /*NOTREACHED*/ +} + +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + disable_interrupts (); + reset_cpu (0); + /*NOTREACHED*/ + return 0; +} + +void icache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); /* get control reg. */ + cp_delay (); + write_p15_c1 (reg | C1_IC); +} + +void icache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_IC); +} + +int icache_status (void) +{ + return (read_p15_c1 () & C1_IC) != 0; +} + +/* It makes no sense to use the dcache if the MMU is not enabled */ +void dcache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg | C1_DC); +} + +void dcache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_DC); +} + +int dcache_status (void) +{ + return (read_p15_c1 () & C1_DC) != 0; +} + +/* flush I/D-cache */ +static void cache_flush (void) +{ + /* invalidate both caches and flush btb */ + asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (0)); + /* mem barrier to sync things */ + asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (0)); +} diff --git a/cpu/arm1176/s3c64xx/Makefile b/cpu/arm1176/s3c64xx/Makefile new file mode 100644 index 0000000000..4ab181159a --- /dev/null +++ b/cpu/arm1176/s3c64xx/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS-y = interrupts.o +COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o +COBJS-$(CONFIG_USB_OHCI_NEW) += usb.o + +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm1176/s3c64xx/config.mk b/cpu/arm1176/s3c64xx/config.mk new file mode 100644 index 0000000000..204e880b87 --- /dev/null +++ b/cpu/arm1176/s3c64xx/config.mk @@ -0,0 +1,34 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -msoft-float + +# Make ARMv5 to allow more compilers to work, even though its v6. +PLATFORM_CPPFLAGS += -march=armv5t +# ========================================================================= +# +# Supply options according to compiler version +# +# ========================================================================= +#PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S new file mode 100644 index 0000000000..08bda99fdc --- /dev/null +++ b/cpu/arm1176/s3c64xx/cpu_init.S @@ -0,0 +1,142 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 + * + * Copyright (C) 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <s3c6400.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + /* Memory subsystem address 0x7e00f120 */ + ldr r0, =ELFIN_MEM_SYS_CFG + + /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */ + mov r1, #0xd + str r1, [r0] + + /* DMC1 base address 0x7e001000 */ + ldr r0, =ELFIN_DMC1_BASE + + ldr r1, =0x4 + str r1, [r0, #INDEX_DMC_MEMC_CMD] + + ldr r1, =DMC_DDR_REFRESH_PRD + str r1, [r0, #INDEX_DMC_REFRESH_PRD] + + ldr r1, =DMC_DDR_CAS_LATENCY + str r1, [r0, #INDEX_DMC_CAS_LATENCY] + + ldr r1, =DMC_DDR_t_DQSS + str r1, [r0, #INDEX_DMC_T_DQSS] + + ldr r1, =DMC_DDR_t_MRD + str r1, [r0, #INDEX_DMC_T_MRD] + + ldr r1, =DMC_DDR_t_RAS + str r1, [r0, #INDEX_DMC_T_RAS] + + ldr r1, =DMC_DDR_t_RC + str r1, [r0, #INDEX_DMC_T_RC] + + ldr r1, =DMC_DDR_t_RCD + ldr r2, =DMC_DDR_schedule_RCD + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RCD] + + ldr r1, =DMC_DDR_t_RFC + ldr r2, =DMC_DDR_schedule_RFC + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RFC] + + ldr r1, =DMC_DDR_t_RP + ldr r2, =DMC_DDR_schedule_RP + orr r1, r1, r2 + str r1, [r0, #INDEX_DMC_T_RP] + + ldr r1, =DMC_DDR_t_RRD + str r1, [r0, #INDEX_DMC_T_RRD] + + ldr r1, =DMC_DDR_t_WR + str r1, [r0, #INDEX_DMC_T_WR] + + ldr r1, =DMC_DDR_t_WTR + str r1, [r0, #INDEX_DMC_T_WTR] + + ldr r1, =DMC_DDR_t_XP + str r1, [r0, #INDEX_DMC_T_XP] + + ldr r1, =DMC_DDR_t_XSR + str r1, [r0, #INDEX_DMC_T_XSR] + + ldr r1, =DMC_DDR_t_ESR + str r1, [r0, #INDEX_DMC_T_ESR] + + ldr r1, =DMC1_MEM_CFG + str r1, [r0, #INDEX_DMC_MEMORY_CFG] + + ldr r1, =DMC1_MEM_CFG2 + str r1, [r0, #INDEX_DMC_MEMORY_CFG2] + + ldr r1, =DMC1_CHIP0_CFG + str r1, [r0, #INDEX_DMC_CHIP_0_CFG] + + ldr r1, =DMC_DDR_32_CFG + str r1, [r0, #INDEX_DMC_USER_CONFIG] + + /* DMC0 DDR Chip 0 configuration direct command reg */ + ldr r1, =DMC_NOP0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Precharge All */ + ldr r1, =DMC_PA0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Auto Refresh 2 time */ + ldr r1, =DMC_AR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* MRS */ + ldr r1, =DMC_mDDR_EMR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Mode Reg */ + ldr r1, =DMC_mDDR_MR0 + str r1, [r0, #INDEX_DMC_DIRECT_CMD] + + /* Enable DMC1 */ + mov r1, #0x0 + str r1, [r0, #INDEX_DMC_MEMC_CMD] + +check_dmc1_ready: + ldr r1, [r0, #INDEX_DMC_MEMC_STATUS] + mov r2, #0x3 + and r1, r1, r2 + cmp r1, #0x1 + bne check_dmc1_ready + nop + + mov pc, lr + + .ltorg diff --git a/cpu/arm1176/s3c64xx/interrupts.c b/cpu/arm1176/s3c64xx/interrupts.c new file mode 100644 index 0000000000..8356ae49e4 --- /dev/null +++ b/cpu/arm1176/s3c64xx/interrupts.c @@ -0,0 +1,174 @@ +/* + * (C) Copyright 2003 + * Texas Instruments <www.ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002-2004 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2004 + * Philippe Robin, ARM Ltd. <philippe.robin@arm.com> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/proc-armv/ptrace.h> +#include <s3c6400.h> + +static ulong timer_load_val; + +#define PRESCALER 167 + +static s3c64xx_timers *s3c64xx_get_base_timers(void) +{ + return (s3c64xx_timers *)ELFIN_TIMER_BASE; +} + +/* macro to read the 16 bit timer */ +static inline ulong read_timer(void) +{ + s3c64xx_timers *const timers = s3c64xx_get_base_timers(); + + return timers->TCNTO4; +} + +/* Internal tick units */ +/* Last decremneter snapshot */ +static unsigned long lastdec; +/* Monotonic incrementing timer */ +static unsigned long long timestamp; + +int interrupt_init(void) +{ + s3c64xx_timers *const timers = s3c64xx_get_base_timers(); + + /* use PWM Timer 4 because it has no output */ + /* + * We use the following scheme for the timer: + * Prescaler is hard fixed at 167, divider at 1/4. + * This gives at PCLK frequency 66MHz approx. 10us ticks + * The timer is set to wrap after 100s, at 66MHz this obviously + * happens after 10,000,000 ticks. A long variable can thus + * keep values up to 40,000s, i.e., 11 hours. This should be + * enough for most uses:-) Possible optimizations: select a + * binary-friendly frequency, e.g., 1ms / 128. Also calculate + * the prescaler automatically for other PCLK frequencies. + */ + timers->TCFG0 = PRESCALER << 8; + if (timer_load_val == 0) { + timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */ + timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000; + } + + /* load value for 10 ms timeout */ + lastdec = timers->TCNTB4 = timer_load_val; + /* auto load, manual update of Timer 4 */ + timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | + TCON_4_UPDATE; + + /* auto load, start Timer 4 */ + timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON; + timestamp = 0; + + return 0; +} + +/* + * timer without interrupts + */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + ulong now = read_timer(); + + if (lastdec >= now) { + /* normal mode */ + timestamp += lastdec - now; + } else { + /* we have an overflow ... */ + timestamp += lastdec + timer_load_val - now; + } + lastdec = now; + + return timestamp; +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + /* We overrun in 100s */ + return (ulong)(timer_load_val / 100); +} + +void reset_timer_masked(void) +{ + /* reset time */ + lastdec = read_timer(); + timestamp = 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer_masked(void) +{ + return get_ticks() / (timer_load_val / (100 * CFG_HZ)); +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + timestamp = t * (timer_load_val / (100 * CFG_HZ)); +} + +void udelay(unsigned long usec) +{ + unsigned long long tmp; + ulong tmo; + + tmo = (usec + 9) / 10; + tmp = get_ticks() + tmo; /* get current timestamp */ + + while (get_ticks() < tmp)/* loop till event */ + /*NOP*/; +} diff --git a/cpu/arm1176/s3c64xx/speed.c b/cpu/arm1176/s3c64xx/speed.c new file mode 100644 index 0000000000..5c335a55a9 --- /dev/null +++ b/cpu/arm1176/s3c64xx/speed.c @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2001-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This code should work for both the S3C2400 and the S3C2410 + * as they seem to have the same PLL and clock machinery inside. + * The different address mapping is handled by the s3c24xx.h files below. + */ + +#include <common.h> +#include <s3c6400.h> + +#define APLL 0 +#define MPLL 1 +#define EPLL 2 + +/* ------------------------------------------------------------------------- */ +/* + * NOTE: This describes the proper use of this file. + * + * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. + * + * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of + * the specified bus in HZ. + */ +/* ------------------------------------------------------------------------- */ + +static ulong get_PLLCLK(int pllreg) +{ + ulong r, m, p, s; + + switch (pllreg) { + case APLL: + r = APLL_CON_REG; + break; + case MPLL: + r = MPLL_CON_REG; + break; + case EPLL: + r = EPLL_CON0_REG; + break; + default: + hang(); + } + + m = (r >> 16) & 0x3ff; + p = (r >> 8) & 0x3f; + s = r & 0x7; + + return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s))); +} + +/* return ARMCORE frequency */ +ulong get_ARMCLK(void) +{ + ulong div; + + div = CLK_DIV0_REG; + + return get_PLLCLK(APLL) / ((div & 0x7) + 1); +} + +/* return FCLK frequency */ +ulong get_FCLK(void) +{ + return get_PLLCLK(APLL); +} + +/* return HCLK frequency */ +ulong get_HCLK(void) +{ + ulong fclk; + + uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; + uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1; + + /* + * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on + * s3c6400 and is always 0, and it is indeed running in ASYNC mode + */ + if (OTHERS_REG & 0x80) + fclk = get_FCLK(); /* SYNC Mode */ + else + fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ + + return fclk / (hclk_div * hclkx2_div); +} + +/* return PCLK frequency */ +ulong get_PCLK(void) +{ + ulong fclk; + uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1; + uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1; + + if (OTHERS_REG & 0x80) + fclk = get_FCLK(); /* SYNC Mode */ + else + fclk = get_PLLCLK(MPLL); /* ASYNC Mode */ + + return fclk / (hclkx2_div * pre_div); +} + +/* return UCLK frequency */ +ulong get_UCLK(void) +{ + return get_PLLCLK(EPLL); +} + +int print_cpuinfo(void) +{ + printf("\nCPU: S3C6400@%luMHz\n", get_ARMCLK() / 1000000); + printf(" Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ", + get_FCLK() / 1000000, get_HCLK() / 1000000, + get_PCLK() / 1000000); + + if (OTHERS_REG & 0x80) + printf("(SYNC Mode) \n"); + else + printf("(ASYNC Mode) \n"); + return 0; +} diff --git a/cpu/arm1176/s3c64xx/usb.c b/cpu/arm1176/s3c64xx/usb.c new file mode 100644 index 0000000000..274a4ed309 --- /dev/null +++ b/cpu/arm1176/s3c64xx/usb.c @@ -0,0 +1,45 @@ +/* + * URB OHCI HCD (Host Controller Driver) initialization for USB on the S3C64XX. + * + * Copyright (C) 2008, + * Guennadi Liakhovetski, DENX Software Engineering <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <s3c6400.h> + +int usb_cpu_init(void) +{ + OTHERS_REG |= 0x10000; + return 0; +} + +int usb_cpu_stop(void) +{ + OTHERS_REG &= ~0x10000; + return 0; +} + +void usb_cpu_init_fail(void) +{ + OTHERS_REG &= ~0x10000; +} diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S new file mode 100644 index 0000000000..991277f1c7 --- /dev/null +++ b/cpu/arm1176/start.S @@ -0,0 +1,469 @@ +/* + * armboot - Startup Code for S3C6400/ARM1176 CPU-core + * + * Copyright (c) 2007 Samsung Electronics + * + * Copyright (C) 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * 2007-09-21 - Restructured codes by jsgood (jsgood.yang@samsung.com) + * 2007-09-21 - Added MoviNAND and OneNAND boot codes by + * jsgood (jsgood.yang@samsung.com) + * Base codes by scsuh (sc.suh) + */ + +#include <config.h> +#include <version.h> +#ifdef CONFIG_ENABLE_MMU +#include <asm/proc/domain.h> +#endif +#include <s3c6400.h> + +#if !defined(CONFIG_ENABLE_MMU) && !defined(CFG_PHY_UBOOT_BASE) +#define CFG_PHY_UBOOT_BASE CFG_UBOOT_BASE +#endif + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + +.globl _start +_start: b reset +#ifndef CONFIG_NAND_SPL + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: + .word undefined_instruction +_software_interrupt: + .word software_interrupt +_prefetch_abort: + .word prefetch_abort +_data_abort: + .word data_abort +_not_used: + .word not_used +_irq: + .word irq +_fiq: + .word fiq +_pad: + .word 0x12345678 /* now 16*4=64 */ +#else + . = _start + 64 +#endif + +.global _end_vect +_end_vect: + .balignl 16,0xdeadbeef +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +_TEXT_BASE: + .word TEXT_BASE + +/* + * Below variable is very important because we use MMU in U-Boot. + * Without it, we cannot run code correctly before MMU is ON. + * by scsuh. + */ +_TEXT_PHY_BASE: + .word CFG_PHY_UBOOT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * These are defined in the board-specific linker script. + */ +.globl _bss_start +_bss_start: + .word __bss_start + +.globl _bss_end +_bss_end: + .word _end + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0, cpsr + bic r0, r0, #0x3f + orr r0, r0, #0xd3 + msr cpsr, r0 + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ + /* + * we do sys-critical inits only at reboot, + * not when booting from ram! + */ +cpu_init_crit: + /* + * When booting from NAND - it has definitely been a reset, so, no need + * to flush caches and disable the MMU + */ +#ifndef CONFIG_NAND_SPL + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) + orr r0, r0, #0x00000002 @ set bit 2 (A) Align + orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache + /* Prepare to disable the MMU */ + adr r1, mmu_disable_phys + /* We presume we're within the first 1024 bytes */ + and r1, r1, #0x3fc + ldr r2, _TEXT_PHY_BASE + ldr r3, =0xfff00000 + and r2, r2, r3 + orr r2, r2, r1 + b mmu_disable + + .align 5 + /* Run in a single cache-line */ +mmu_disable: + mcr p15, 0, r0, c1, c0, 0 + nop + nop + mov pc, r2 +#endif + +mmu_disable_phys: + /* Peri port setup */ + ldr r0, =0x70000000 + orr r0, r0, #0x13 + mcr p15,0,r0,c15,c2,4 @ 256M (0x70000000 - 0x7fffffff) + + /* + * Go setup Memory and board specific bits prior to relocation. + */ + bl lowlevel_init /* go setup pll,mux,memory */ + +after_copy: +#ifdef CONFIG_ENABLE_MMU +enable_mmu: + /* enable domain access */ + ldr r5, =0x0000ffff + mcr p15, 0, r5, c3, c0, 0 /* load domain access register */ + + /* Set the TTB register */ + ldr r0, _mmu_table_base + ldr r1, =CFG_PHY_UBOOT_BASE + ldr r2, =0xfff00000 + bic r0, r0, r2 + orr r1, r0, r1 + mcr p15, 0, r1, c2, c0, 0 + + /* Enable the MMU */ + mrc p15, 0, r0, c1, c0, 0 + orr r0, r0, #1 /* Set CR_M to enable MMU */ + + /* Prepare to enable the MMU */ + adr r1, skip_hw_init + and r1, r1, #0x3fc + ldr r2, _TEXT_BASE + ldr r3, =0xfff00000 + and r2, r2, r3 + orr r2, r2, r1 + b mmu_enable + + .align 5 + /* Run in a single cache-line */ +mmu_enable: + + mcr p15, 0, r0, c1, c0, 0 + nop + nop + mov pc, r2 +#endif + +skip_hw_init: + /* Set up the stack */ +stack_setup: +#ifdef CONFIG_MEMORY_UPPER_CODE + ldr sp, =(CFG_UBOOT_BASE + CFG_UBOOT_SIZE - 0xc) +#else + ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ + sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ + sub sp, r0, #12 /* leave 3 words for abort-stack */ + +#endif + +clear_bss: + ldr r0, _bss_start /* find start of bss segment */ + ldr r1, _bss_end /* stop here */ + mov r2, #0 /* clear */ + +clbss_l: + str r2, [r0] /* clear loop... */ + add r0, r0, #4 + cmp r0, r1 + ble clbss_l + +#ifndef CONFIG_NAND_SPL + ldr pc, _start_armboot + +_start_armboot: + .word start_armboot +#else + b nand_boot +/* .word nand_boot*/ +#endif + +#ifdef CONFIG_ENABLE_MMU +_mmu_table_base: + .word mmu_table +#endif + +#ifndef CONFIG_NAND_SPL +/* + * we assume that cache operation is done before. (eg. cleanup_before_linux()) + * actually, we don't need to do anything about cache if not use d-cache in + * U-Boot. So, in this function we clean only MMU. by scsuh + * + * void theLastJump(void *kernel, int arch_num, uint boot_params); + */ +#ifdef CONFIG_ENABLE_MMU + .globl theLastJump +theLastJump: + mov r9, r0 + ldr r3, =0xfff00000 + ldr r4, _TEXT_PHY_BASE + adr r5, phy_last_jump + bic r5, r5, r3 + orr r5, r5, r4 + mov pc, r5 +phy_last_jump: + /* + * disable MMU stuff + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */ + bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ + orr r0, r0, #0x00000002 /* set bit 2 (A) Align */ + orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */ + mcr p15, 0, r0, c1, c0, 0 + + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + mov r0, #0 + mov pc, r9 +#endif +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + */ + + .macro bad_save_user_regs + /* carve out a frame on current user stack */ + sub sp, sp, #S_FRAME_SIZE + /* Save user registers (now in svc mode) r0-r12 */ + stmia sp, {r0 - r12} + + ldr r2, _armboot_start + sub r2, r2, #(CFG_MALLOC_LEN) + /* set base 2 words into abort stack */ + sub r2, r2, #(CFG_GBL_DATA_SIZE+8) + /* get values for "aborted" pc and cpsr (into parm regs) */ + ldmia r2, {r2 - r3} + /* grab pointer to old stack */ + add r0, sp, #S_FRAME_SIZE + + add r5, sp, #S_SP + mov r1, lr + /* save sp_SVC, lr_SVC, pc, cpsr */ + stmia r5, {r0 - r3} + /* save current stack into r0 (param register) */ + mov r0, sp + .endm + + .macro get_bad_stack + /* setup our mode stack (enter in banked mode) */ + ldr r13, _armboot_start + /* move past malloc pool */ + sub r13, r13, #(CFG_MALLOC_LEN) + /* move to reserved a couple spots for abort stack */ + sub r13, r13, #(CFG_GBL_DATA_SIZE + 8) + + /* save caller lr in position 0 of saved stack */ + str lr, [r13] + /* get the spsr */ + mrs lr, spsr + /* save spsr in position 1 of saved stack */ + str lr, [r13, #4] + + /* prepare SVC-Mode */ + mov r13, #MODE_SVC + @ msr spsr_c, r13 + /* switch modes, make sure moves will execute */ + msr spsr, r13 + /* capture return pc */ + mov lr, pc + /* jump to next instruction & switch modes. */ + movs pc, lr + .endm + + .macro get_bad_stack_swi + /* space on current stack for scratch reg. */ + sub r13, r13, #4 + /* save R0's value. */ + str r0, [r13] + /* get data regions start */ + ldr r0, _armboot_start + /* move past malloc pool */ + sub r0, r0, #(CFG_MALLOC_LEN) + /* move past gbl and a couple spots for abort stack */ + sub r0, r0, #(CFG_GBL_DATA_SIZE + 8) + /* save caller lr in position 0 of saved stack */ + str lr, [r0] + /* get the spsr */ + mrs r0, spsr + /* save spsr in position 1 of saved stack */ + str lr, [r0, #4] + /* restore r0 */ + ldr r0, [r13] + /* pop stack entry */ + add r13, r13, #4 + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack_swi + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq +#endif /* CONFIG_NAND_SPL */ diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c index 2aa9ef128b..59f039b7c3 100644 --- a/cpu/arm926ejs/davinci/dp83848.c +++ b/cpu/arm926ejs/davinci/dp83848.c @@ -38,9 +38,9 @@ int dp83848_is_phy_connected(int phy_addr) { u_int16_t id1, id2; - if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) + if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1)) return(0); - if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) + if (!davinci_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2)) return(0); if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI)) @@ -54,13 +54,13 @@ int dp83848_get_link_speed(int phy_addr) u_int16_t tmp; volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR; - if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) return(0); if (!(tmp & DP83848_LINK_STATUS)) /* link up? */ return(0); - if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp)) return(0); /* Speed doesn't matter, there is no setting for it in EMAC... */ @@ -101,7 +101,7 @@ int dp83848_init_phy(int phy_addr) } /* Disable PHY Interrupts */ - dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); + davinci_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0); return(ret); } @@ -112,13 +112,13 @@ int dp83848_auto_negotiate(int phy_addr) u_int16_t tmp; - if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) return(0); /* Restart Auto_negotiation */ tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */ tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */ - dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); /* Set the Auto_negotiation Advertisement Register * MII advertising for Next page, 100BaseTxFD and HD, @@ -126,23 +126,23 @@ int dp83848_auto_negotiate(int phy_addr) */ tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX | DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3; - dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); + davinci_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp); /* Read Control Register */ - if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp)) return(0); tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE; - dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); /* Restart Auto_negotiation */ tmp |= DP83848_RESTART_AUTONEG; - dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); + davinci_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp); /*check AutoNegotiate complete */ udelay(10000); - if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp)) return(0); if (!(tmp & DP83848_AUTONEG_COMP)) diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c index 5ae035b986..f6f81df6ca 100644 --- a/cpu/arm926ejs/davinci/ether.c +++ b/cpu/arm926ejs/davinci/ether.c @@ -50,12 +50,12 @@ unsigned int emac_dbg = 0; #define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args) /* Internal static functions */ -static int dm644x_eth_hw_init (void); -static int dm644x_eth_open (void); -static int dm644x_eth_close (void); -static int dm644x_eth_send_packet (volatile void *packet, int length); -static int dm644x_eth_rcv_packet (void); -static void dm644x_eth_mdio_enable(void); +static int davinci_eth_hw_init (void); +static int davinci_eth_open (void); +static int davinci_eth_close (void); +static int davinci_eth_send_packet (volatile void *packet, int length); +static int davinci_eth_rcv_packet (void); +static void davinci_eth_mdio_enable(void); static int gen_init_phy(int phy_addr); static int gen_is_phy_connected(int phy_addr); @@ -65,48 +65,48 @@ static int gen_auto_negotiate(int phy_addr); /* Wrappers exported to the U-Boot proper */ int eth_hw_init(void) { - return(dm644x_eth_hw_init()); + return(davinci_eth_hw_init()); } int eth_init(bd_t * bd) { - return(dm644x_eth_open()); + return(davinci_eth_open()); } void eth_halt(void) { - dm644x_eth_close(); + davinci_eth_close(); } int eth_send(volatile void *packet, int length) { - return(dm644x_eth_send_packet(packet, length)); + return(davinci_eth_send_packet(packet, length)); } int eth_rx(void) { - return(dm644x_eth_rcv_packet()); + return(davinci_eth_rcv_packet()); } void eth_mdio_enable(void) { - dm644x_eth_mdio_enable(); + davinci_eth_mdio_enable(); } /* End of wrappers */ -static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; +static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; /* * This function must be called before emac_open() if you want to override * the default mac address. */ -void dm644x_eth_set_mac_addr(const u_int8_t *addr) +void davinci_eth_set_mac_addr(const u_int8_t *addr) { int i; - for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) { - dm644x_eth_mac_addr[i] = addr[i]; + for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) { + davinci_eth_mac_addr[i] = addr[i]; } } @@ -130,7 +130,7 @@ static volatile u_int8_t active_phy_addr = 0xff; phy_t phy; -static void dm644x_eth_mdio_enable(void) +static void davinci_eth_mdio_enable(void) { u_int32_t clkdiv; @@ -149,7 +149,7 @@ static void dm644x_eth_mdio_enable(void) * If no active PHY (or more than one PHY) found returns 0. * Sets active_phy_addr variable. */ -static int dm644x_eth_phy_detect(void) +static int davinci_eth_phy_detect(void) { u_int32_t phy_act_state; int i; @@ -159,7 +159,7 @@ static int dm644x_eth_phy_detect(void) if ((phy_act_state = adap_mdio->ALIVE) == 0) return(0); /* No active PHYs */ - debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state); + debug_emac("davinci_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state); for (i = 0; i < 32; i++) { if (phy_act_state & (1 << i)) { @@ -177,7 +177,7 @@ static int dm644x_eth_phy_detect(void) /* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ -int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) +int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) { int tmp; @@ -201,7 +201,7 @@ int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) } /* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */ -int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) +int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) { while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;} @@ -235,14 +235,14 @@ static int gen_is_phy_connected(int phy_addr) { u_int16_t dummy; - return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy)); + return(davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy)); } static int gen_get_link_speed(int phy_addr) { u_int16_t tmp; - if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) + if (davinci_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04)) return(1); return(0); @@ -252,16 +252,16 @@ static int gen_auto_negotiate(int phy_addr) { u_int16_t tmp; - if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) return(0); /* Restart Auto_negotiation */ tmp |= PHY_BMCR_AUTON; - dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp); + davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp); /*check AutoNegotiate complete */ udelay (10000); - if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) return(0); if (!(tmp & PHY_BMSR_AUTN_COMP)) @@ -273,19 +273,19 @@ static int gen_auto_negotiate(int phy_addr) #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) -static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) +static int davinci_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value) { - return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1); + return(davinci_eth_phy_read(addr, reg, value) ? 0 : 1); } -static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) +static int davinci_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1); + return(davinci_eth_phy_write(addr, reg, value) ? 0 : 1); } -int dm644x_eth_miiphy_initialize(bd_t *bis) +int davinci_eth_miiphy_initialize(bd_t *bis) { - miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write); + miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write); return(1); } @@ -296,13 +296,13 @@ int dm644x_eth_miiphy_initialize(bd_t *bis) * EMAC modules power or pin multiplexors, that is done by board_init() * much earlier in bootup process. Returns 1 on success, 0 otherwise. */ -static int dm644x_eth_hw_init(void) +static int davinci_eth_hw_init(void) { u_int32_t phy_id; u_int16_t tmp; int i; - dm644x_eth_mdio_enable(); + davinci_eth_mdio_enable(); for (i = 0; i < 256; i++) { if (adap_mdio->ALIVE) @@ -316,18 +316,18 @@ static int dm644x_eth_hw_init(void) } /* Find if a PHY is connected and get it's address */ - if (!dm644x_eth_phy_detect()) + if (!davinci_eth_phy_detect()) return(0); /* Get PHY ID and initialize phy_ops for a detected PHY */ - if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) { + if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) { active_phy_addr = 0xff; return(0); } phy_id = (tmp << 16) & 0xffff0000; - if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) { + if (!davinci_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) { active_phy_addr = 0xff; return(0); } @@ -364,7 +364,7 @@ static int dm644x_eth_hw_init(void) /* Eth device open */ -static int dm644x_eth_open(void) +static int davinci_eth_open(void) { dv_reg_p addr; u_int32_t clkdiv, cnt; @@ -389,26 +389,26 @@ static int dm644x_eth_open(void) /* Using channel 0 only - other channels are disabled */ adap_emac->MACINDEX = 0; adap_emac->MACADDRHI = - (dm644x_eth_mac_addr[3] << 24) | - (dm644x_eth_mac_addr[2] << 16) | - (dm644x_eth_mac_addr[1] << 8) | - (dm644x_eth_mac_addr[0]); + (davinci_eth_mac_addr[3] << 24) | + (davinci_eth_mac_addr[2] << 16) | + (davinci_eth_mac_addr[1] << 8) | + (davinci_eth_mac_addr[0]); adap_emac->MACADDRLO = - (dm644x_eth_mac_addr[5] << 8) | - (dm644x_eth_mac_addr[4]); + (davinci_eth_mac_addr[5] << 8) | + (davinci_eth_mac_addr[4]); adap_emac->MACHASH1 = 0; adap_emac->MACHASH2 = 0; /* Set source MAC address - REQUIRED */ adap_emac->MACSRCADDRHI = - (dm644x_eth_mac_addr[3] << 24) | - (dm644x_eth_mac_addr[2] << 16) | - (dm644x_eth_mac_addr[1] << 8) | - (dm644x_eth_mac_addr[0]); + (davinci_eth_mac_addr[3] << 24) | + (davinci_eth_mac_addr[2] << 16) | + (davinci_eth_mac_addr[1] << 8) | + (davinci_eth_mac_addr[0]); adap_emac->MACSRCADDRLO = - (dm644x_eth_mac_addr[4] << 8) | - (dm644x_eth_mac_addr[5]); + (davinci_eth_mac_addr[4] << 8) | + (davinci_eth_mac_addr[5]); /* Set DMA 8 TX / 8 RX Head pointers to 0 */ addr = &adap_emac->TX0HDP; @@ -473,7 +473,7 @@ static int dm644x_eth_open(void) } /* EMAC Channel Teardown */ -static void dm644x_eth_ch_teardown(int ch) +static void davinci_eth_ch_teardown(int ch) { dv_reg dly = 0xff; dv_reg cnt; @@ -516,12 +516,12 @@ static void dm644x_eth_ch_teardown(int ch) } /* Eth device close */ -static int dm644x_eth_close(void) +static int davinci_eth_close(void) { debug_emac("+ emac_close\n"); - dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */ - dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */ + davinci_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */ + davinci_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */ /* Reset EMAC module and disable interrupts in wrapper */ adap_emac->SOFTRESET = 1; @@ -537,7 +537,7 @@ static int tx_send_loop = 0; * This function sends a single packet on the network and returns * positive number (number of bytes transmitted) or negative for error */ -static int dm644x_eth_send_packet (volatile void *packet, int length) +static int davinci_eth_send_packet (volatile void *packet, int length) { int ret_status = -1; @@ -568,7 +568,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length) /* Wait for packet to complete or link down */ while (1) { if (!phy.get_link_speed (active_phy_addr)) { - dm644x_eth_ch_teardown (EMAC_CH_TX); + davinci_eth_ch_teardown (EMAC_CH_TX); return (ret_status); } if (adap_emac->TXINTSTATRAW & 0x01) { @@ -584,7 +584,7 @@ static int dm644x_eth_send_packet (volatile void *packet, int length) /* * This function handles receipt of a packet from the network */ -static int dm644x_eth_rcv_packet (void) +static int davinci_eth_rcv_packet (void) { volatile emac_desc *rx_curr_desc; volatile emac_desc *curr_desc; diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c index 8130b48de0..ce3e41c551 100644 --- a/cpu/arm926ejs/davinci/lxt972.c +++ b/cpu/arm926ejs/davinci/lxt972.c @@ -39,9 +39,9 @@ int lxt972_is_phy_connected(int phy_addr) { u_int16_t id1, id2; - if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1)) + if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR1, &id1)) return(0); - if (!dm644x_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2)) + if (!davinci_eth_phy_read(phy_addr, PHY_PHYIDR2, &id2)) return(0); if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0)) @@ -55,20 +55,20 @@ int lxt972_get_link_speed(int phy_addr) u_int16_t stat1, tmp; volatile emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR; - if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) + if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1)) return(0); if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */ return(0); - if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) return(0); tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE; - dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); + davinci_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp); /* Read back */ - if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp)) return(0); /* Speed doesn't matter, there is no setting for it in EMAC... */ @@ -95,7 +95,7 @@ int lxt972_init_phy(int phy_addr) } /* Disable PHY Interrupts */ - dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); + davinci_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0); return(ret); } @@ -105,16 +105,16 @@ int lxt972_auto_negotiate(int phy_addr) { u_int16_t tmp; - if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_BMCR, &tmp)) return(0); /* Restart Auto_negotiation */ tmp |= PHY_BMCR_RST_NEG; - dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp); + davinci_eth_phy_write(phy_addr, PHY_BMCR, tmp); /*check AutoNegotiate complete */ udelay (10000); - if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) + if (!davinci_eth_phy_read(phy_addr, PHY_BMSR, &tmp)) return(0); if (!(tmp & PHY_BMSR_AUTN_COMP)) diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c index 78c946f258..0baf9bcd99 100644 --- a/cpu/mcf5227x/speed.c +++ b/cpu/mcf5227x/speed.c @@ -116,5 +116,9 @@ int get_clocks(void) gd->bus_clk = gd->flb_clk; } +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c index 55c9cd356d..8ab5b8ed8b 100644 --- a/cpu/mcf523x/cpu_init.c +++ b/cpu/mcf523x/cpu_init.c @@ -110,8 +110,8 @@ void cpu_init_f(void) #endif #ifdef CONFIG_FSL_I2C - gpio->par_feci2c &= ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK); - gpio->par_feci2c |= (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA); + CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; #endif icache_enable(); diff --git a/cpu/mcf523x/speed.c b/cpu/mcf523x/speed.c index 247d3188bb..1bda2d482e 100644 --- a/cpu/mcf523x/speed.c +++ b/cpu/mcf523x/speed.c @@ -45,5 +45,9 @@ int get_clocks(void) gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 3cacb55f77..68aefe9151 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -80,6 +80,15 @@ void cpu_init_f(void) mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); +#ifdef CONFIG_FSL_I2C + CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; +#ifdef CFG_I2C2_OFFSET + CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR; + CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET; +#endif +#endif + /* enable instruction cache now */ icache_enable(); } @@ -322,7 +331,8 @@ void cpu_init_f(void) #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_FSL_I2C - gpio_reg->par_feci2c = 0x000F; + CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; + CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; #endif /* enable instruction cache now */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index f6edd5b6fa..4cb8f9300d 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -82,5 +82,13 @@ int get_clocks (void) #else gd->bus_clk = gd->cpu_clk; #endif + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#ifdef CFG_I2C2_OFFSET + gd->i2c2_clk = gd->bus_clk; +#endif +#endif + return (0); } diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c index 001b9f42d6..a11e425cab 100644 --- a/cpu/mcf532x/speed.c +++ b/cpu/mcf532x/speed.c @@ -212,5 +212,10 @@ int get_clocks(void) { gd->bus_clk = clock_pll(CFG_CLK / 1000, 0) * 1000; gd->cpu_clk = (gd->bus_clk * 3); + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf5445x/speed.c b/cpu/mcf5445x/speed.c index f677f3ced0..6711a1d7c8 100644 --- a/cpu/mcf5445x/speed.c +++ b/cpu/mcf5445x/speed.c @@ -209,5 +209,9 @@ int get_clocks(void) #endif } +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mcf547x_8x/speed.c b/cpu/mcf547x_8x/speed.c index 389e7c99f5..28fe657298 100644 --- a/cpu/mcf547x_8x/speed.c +++ b/cpu/mcf547x_8x/speed.c @@ -39,5 +39,10 @@ int get_clocks(void) gd->bus_clk = CFG_CLK; gd->cpu_clk = (gd->bus_clk * 2); + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif + return (0); } diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile index 8ba8ae875d..e8f1060748 100644 --- a/cpu/mpc512x/Makefile +++ b/cpu/mpc512x/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o -COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o fec.o i2c.o iopin.o +COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile index 312b0bfc6c..06fdbcfb72 100644 --- a/cpu/mpc5xxx/Makefile +++ b/cpu/mpc5xxx/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)lib$(CPU).a START = start.o SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o -COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \ +COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 001f2c1d3a..15250d470d 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -118,6 +118,7 @@ static inline void ppc4xx_ibm_ddr2_register_dump(void); #define ODS_FULL 0x00000000 #define ODS_REDUCED 0x00000002 +#define OCD_CALIB_DEF 0x00000380 /* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */ #define ODT_EB0R (0x80000000 >> 8) @@ -570,15 +571,24 @@ phys_size_t initdram(int board_type) mtsdram(SDRAM_MCOPT2, (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK | SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) | - (SDRAM_MCOPT2_DCEN_ENABLE | SDRAM_MCOPT2_IPTR_EXECUTE)); + SDRAM_MCOPT2_IPTR_EXECUTE); /*------------------------------------------------------------------ - * Wait for SDRAM_CFG0_DC_EN to complete. + * Wait for IPTR_EXECUTE init sequence to complete. *-----------------------------------------------------------------*/ do { mfsdram(SDRAM_MCSTAT, val); } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP); + /* enable the controller only after init sequence completes */ + mfsdram(SDRAM_MCOPT2, val); + mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE)); + + /* Make sure delay-line calibration is done before proceeding */ + do { + mfsdram(SDRAM_DLCR, val); + } while (!(val & SDRAM_DLCR_DLCS_COMPLETE)); + /* get installed memory size */ dram_size = sdram_memsize(); @@ -1343,22 +1353,50 @@ static void program_initplr(unsigned long *dimm_populated, emr = CMD_EMR | SELECT_EMR | odt | ods; emr2 = CMD_EMR | SELECT_EMR2; emr3 = CMD_EMR | SELECT_EMR3; - mtsdram(SDRAM_INITPLR0, 0xB5000000 | CMD_NOP); /* NOP */ + /* NOP - Wait 106 MemClk cycles */ + mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP | + SDRAM_INITPLR_IMWT_ENCODE(106)); udelay(1000); - mtsdram(SDRAM_INITPLR1, 0x82000400 | CMD_PRECHARGE); /* precharge 8 DDR clock cycle */ - mtsdram(SDRAM_INITPLR2, 0x80800000 | emr2); /* EMR2 */ - mtsdram(SDRAM_INITPLR3, 0x80800000 | emr3); /* EMR3 */ - mtsdram(SDRAM_INITPLR4, 0x80800000 | emr); /* EMR DLL ENABLE */ - mtsdram(SDRAM_INITPLR5, 0x80800000 | mr | DLL_RESET); /* MR w/ DLL reset */ + /* precharge 4 MemClk cycles */ + mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE | + SDRAM_INITPLR_IMWT_ENCODE(4)); + /* EMR2 - Wait tMRD (2 MemClk cycles) */ + mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 | + SDRAM_INITPLR_IMWT_ENCODE(2)); + /* EMR3 - Wait tMRD (2 MemClk cycles) */ + mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 | + SDRAM_INITPLR_IMWT_ENCODE(2)); + /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */ + mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr | + SDRAM_INITPLR_IMWT_ENCODE(2)); + /* MR w/ DLL reset - 200 cycle wait for DLL reset */ + mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET | + SDRAM_INITPLR_IMWT_ENCODE(200)); udelay(1000); - mtsdram(SDRAM_INITPLR6, 0x82000400 | CMD_PRECHARGE); /* precharge 8 DDR clock cycle */ - mtsdram(SDRAM_INITPLR7, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */ - mtsdram(SDRAM_INITPLR8, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */ - mtsdram(SDRAM_INITPLR9, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */ - mtsdram(SDRAM_INITPLR10, 0x8a000000 | CMD_REFRESH); /* Refresh 50 DDR clock cycle */ - mtsdram(SDRAM_INITPLR11, 0x80000000 | mr); /* MR w/o DLL reset */ - mtsdram(SDRAM_INITPLR12, 0x80800380 | emr); /* EMR OCD Default */ - mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ + /* precharge 4 MemClk cycles */ + mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE | + SDRAM_INITPLR_IMWT_ENCODE(4)); + /* Refresh 25 MemClk cycles */ + mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH | + SDRAM_INITPLR_IMWT_ENCODE(25)); + /* Refresh 25 MemClk cycles */ + mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH | + SDRAM_INITPLR_IMWT_ENCODE(25)); + /* Refresh 25 MemClk cycles */ + mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH | + SDRAM_INITPLR_IMWT_ENCODE(25)); + /* Refresh 25 MemClk cycles */ + mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH | + SDRAM_INITPLR_IMWT_ENCODE(25)); + /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */ + mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr | + SDRAM_INITPLR_IMWT_ENCODE(2)); + /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */ + mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF | + SDRAM_INITPLR_IMWT_ENCODE(2) | emr); + /* EMR OCD Exit */ + mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr | + SDRAM_INITPLR_IMWT_ENCODE(2)); } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); spd_ddr_init_hang (); @@ -2466,12 +2504,13 @@ static void program_DQS_calibration(unsigned long *dimm_populated, * Program RFDC register * Set Feedback Fractional Oversample * Auto-detect read sample cycle enable + * Set RFOS to 1/4 of memclk cycle (0x3f) *-----------------------------------------------------------------*/ mfsdram(SDRAM_RFDC, val); mtsdram(SDRAM_RFDC, (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK | SDRAM_RFDC_RFFD_MASK)) - | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0) | + | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) | SDRAM_RFDC_RFFD_ENCODE(0))); DQS_calibration_process(); diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c index 72acfd01b5..7d96e796d1 100644 --- a/cpu/ppc4xx/ndfc.c +++ b/cpu/ppc4xx/ndfc.c @@ -149,6 +149,10 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len } #endif /* #ifndef CONFIG_NAND_SPL */ +#ifndef CFG_NAND_BCR +#define CFG_NAND_BCR 0x80002222 +#endif + void board_nand_select_device(struct nand_chip *nand, int chip) { /* @@ -161,7 +165,14 @@ void board_nand_select_device(struct nand_chip *nand, int chip) /* Set NandFlash Core Configuration Register */ /* 1 col x 2 rows */ out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24)); - out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222); + out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CFG_NAND_BCR); +} + +static void ndfc_select_chip(struct mtd_info *mtd, int chip) +{ + /* + * Nothing to do here! + */ } int board_nand_init(struct nand_chip *nand) @@ -192,6 +203,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.mode = NAND_ECC_HW; nand->ecc.size = 256; nand->ecc.bytes = 3; + nand->select_chip = ndfc_select_chip; #ifndef CONFIG_NAND_SPL nand->write_buf = ndfc_write_buf; diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c index 7944c6c3c2..a95d1cb17d 100644 --- a/cpu/ppc4xx/uic.c +++ b/cpu/ppc4xx/uic.c @@ -129,11 +129,11 @@ void external_interrupt(struct pt_regs *regs) uic_interrupt(UIC3_DCR_BASE, 96); #endif + mtdcr(uic0sr, (uic_msr & UICB0_ALL)); + if (uic_msr & ~(UICB0_ALL)) uic_interrupt(UIC0_DCR_BASE, 0); - mtdcr(uic0sr, uic_msr); - return; } diff --git a/cpu/sh2/Makefile b/cpu/sh2/Makefile new file mode 100644 index 0000000000..50f67208b2 --- /dev/null +++ b/cpu/sh2/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# Copyright (C) 2008 Renesas Solutions Corp. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o +OBJS = cpu.o interrupts.o watchdog.o time.o # cache.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/sh2/cache.c b/cpu/sh2/cache.c new file mode 100644 index 0000000000..b5c47cf21a --- /dev/null +++ b/cpu/sh2/cache.c @@ -0,0 +1,112 @@ +/* + * (C) Copyright 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright (C) 2007, 2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> + +/* + * Jump to P2 area. + * When handling TLB or caches, we need to do it from P2 area. + */ +#define jump_to_P2() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "or %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy) \ + : "r" (0x20000000)); \ +} while (0) + +/* + * Back to P1 area. + */ +#define back_to_P1() \ +do { \ + unsigned long __dummy; \ + __asm__ __volatile__( \ + "nop;nop;nop;nop;nop;nop;nop\n\t" \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +#define CACHE_VALID 1 +#define CACHE_UPDATED 2 + +static inline void cache_wback_all(void) +{ + unsigned long addr, data, i, j; + + jump_to_P2(); + for (i = 0; i < CACHE_OC_NUM_ENTRIES; i++) { + for (j = 0; j < CACHE_OC_NUM_WAYS; j++) { + addr = CACHE_OC_ADDRESS_ARRAY + | (j << CACHE_OC_WAY_SHIFT) + | (i << CACHE_OC_ENTRY_SHIFT); + data = inl(addr); + if (data & CACHE_UPDATED) { + data &= ~CACHE_UPDATED; + outl(data, addr); + } + } + } + back_to_P1(); +} + + +#define CACHE_ENABLE 0 +#define CACHE_DISABLE 1 + +int cache_control(unsigned int cmd) +{ + unsigned long ccr; + + jump_to_P2(); + ccr = inl(CCR); + + if (ccr & CCR_CACHE_ENABLE) + cache_wback_all(); + + if (cmd == CACHE_DISABLE) + outl(CCR_CACHE_STOP, CCR); + else + outl(CCR_CACHE_INIT, CCR); + back_to_P1(); + + return 0; +} diff --git a/cpu/sh2/config.mk b/cpu/sh2/config.mk new file mode 100644 index 0000000000..52d5a0f4d5 --- /dev/null +++ b/cpu/sh2/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2007-2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +PLATFORM_CPPFLAGS += -m3e -mb +PLATFORM_RELFLAGS += -ffixed-r13 +PLATFORM_LDFLAGS += -EB diff --git a/cpu/sh2/cpu.c b/cpu/sh2/cpu.c new file mode 100644 index 0000000000..e0cb04752d --- /dev/null +++ b/cpu/sh2/cpu.c @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> + +#define STBCR4 0xFFFE040C +#define cmt_clock_enable() do {\ + writeb(readb(STBCR4) & ~0x04, STBCR4);\ + } while (0) +#define scif0_enable() do {\ + writeb(readb(STBCR4) & ~0x80, STBCR4);\ + } while (0) + +int checkcpu(void) +{ +#if defined(CONFIG_SH2A) + puts("CPU: SH2A\n"); +#else + puts("CPU: SH2\n"); +#endif + return 0; +} + +int cpu_init(void) +{ + /* SCIF enable */ + scif0_enable(); + /* CMT clock enable */ + cmt_clock_enable() ; + return 0; +} + +int cleanup_before_linux(void) +{ + disable_interrupts(); + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + disable_interrupts(); + reset_cpu(0); + return 0; +} + +void flush_cache(unsigned long addr, unsigned long size) +{ + +} + +void icache_enable(void) +{ +} + +void icache_disable(void) +{ +} + +int icache_status(void) +{ + return 0; +} + +void dcache_enable(void) +{ +} + +void dcache_disable(void) +{ +} + +int dcache_status(void) +{ + return 0; +} diff --git a/board/integratorcp/memsetup.S b/cpu/sh2/interrupts.c index da43cb6a71..fe6ff3a9cb 100644 --- a/board/integratorcp/memsetup.S +++ b/cpu/sh2/interrupts.c @@ -1,5 +1,6 @@ /* - * Memory setup for integratorAP + * Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. * * See file CREDITS for list of people who contributed to this * project. @@ -19,11 +20,20 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -/* - * Memory setup - * - the reset defaults are assumed sufficient - */ -.globl memsetup -memsetup: - mov pc,lr +#include <common.h> + +int interrupt_init(void) +{ + return 0; +} + +void enable_interrupts(void) +{ + +} + +int disable_interrupts(void) +{ + return 0; +} diff --git a/cpu/sh2/start.S b/cpu/sh2/start.S new file mode 100644 index 0000000000..c4fa688bda --- /dev/null +++ b/cpu/sh2/start.S @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + + .text + .align 2 + + .global _start +_start: + .long 0x00000010 /* Ppower ON reset PC*/ + .long 0x00000000 + .long 0x00000010 /* Manual reset PC */ + .long 0x00000000 +_init: + mov.l ._lowlevel_init, r0 +100: bsrf r0 + nop + bsr 1f + nop +1: sts pr, r5 + mov.l ._reloc_dst, r4 + add #(_start-1b), r5 + mov.l ._reloc_dst_end, r6 + +2: mov.l @r5+, r1 + mov.l r1, @r4 + add #4, r4 + cmp/hs r6, r4 + bf 2b + + mov.l ._bss_start, r4 + mov.l ._bss_end, r5 + mov #0, r1 + +3: mov.l r1, @r4 /* bss clear */ + add #4, r4 + cmp/hs r5, r4 + bf 3b + + mov.l ._gd_init, r13 /* global data */ + mov.l ._stack_init, r15 /* stack */ + + mov.l ._sh_generic_init, r0 + jsr @r0 + nop + +loop: + bra loop + + .align 2 + +._lowlevel_init: .long (lowlevel_init - (100b + 4)) +._reloc_dst: .long reloc_dst +._reloc_dst_end: .long reloc_dst_end +._bss_start: .long bss_start +._bss_end: .long bss_end +._gd_init: .long (_start - CFG_GBL_DATA_SIZE) +._stack_init: .long (_start - CFG_GBL_DATA_SIZE - CFG_MALLOC_LEN - 16) +._sh_generic_init: .long sh_generic_init diff --git a/cpu/sh2/time.c b/cpu/sh2/time.c new file mode 100644 index 0000000000..d6eb0cb103 --- /dev/null +++ b/cpu/sh2/time.c @@ -0,0 +1,111 @@ +/* + * Copyright (C) 2007,2008 Nobobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +#define CMT_CMCSR_INIT 0x0001 /* PCLK/32 */ +#define CMT_CMCSR_CALIB 0x0000 +#define CMT_MAX_COUNTER (0xFFFFFFFF) +#define CMT_TIMER_RESET (0xFFFF) + +static vu_long cmt0_timer; + +static void cmt_timer_start(unsigned int timer) +{ + writew(readw(CMSTR) | 0x01, CMSTR); +} + +static void cmt_timer_stop(unsigned int timer) +{ + writew(readw(CMSTR) & ~0x01, CMSTR); +} + +int timer_init(void) +{ + cmt0_timer = 0; + /* Divide clock by 32 */ + readw(CMCSR_0); + writew(CMT_CMCSR_INIT, CMCSR_0); + + /* User Device 0 only */ + cmt_timer_stop(0); + set_timer(CMT_TIMER_RESET); + cmt_timer_start(0); + + return 0; +} + +unsigned long long get_ticks(void) +{ + return cmt0_timer; +} + +static vu_long cmcnt; +ulong get_timer(ulong base) +{ + ulong data = readw(CMCNT_0); + + if (data >= cmcnt) + cmcnt = data - cmcnt; + else + cmcnt = (CMT_TIMER_RESET - cmcnt) + data; + + if ((cmt0_timer + cmcnt) > CMT_MAX_COUNTER) + cmt0_timer = ((cmt0_timer + cmcnt) - CMT_MAX_COUNTER); + else + cmt0_timer += cmcnt; + + cmcnt = data; + return cmt0_timer - base; +} + +void set_timer(ulong t) +{ + writew((u16) t, CMCOR_0); +} + +void reset_timer(void) +{ + cmt_timer_stop(0); + set_timer(CMT_TIMER_RESET); + cmt0_timer = 0; + cmt_timer_start(0); +} + +void udelay(unsigned long usec) +{ + unsigned int start = get_timer(0); + + while (get_timer((ulong) start) < (usec * (CFG_HZ / 1000000))) + continue; +} + +unsigned long get_tbclk(void) +{ + return CFG_HZ; +} diff --git a/board/integratorap/memsetup.S b/cpu/sh2/watchdog.c index da43cb6a71..de0254b446 100644 --- a/board/integratorap/memsetup.S +++ b/cpu/sh2/watchdog.c @@ -1,8 +1,6 @@ /* - * Memory setup for integratorAP - * - * See file CREDITS for list of people who contributed to this - * project. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhoro@renesas.com> + * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -19,11 +17,17 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -/* - * Memory setup - * - the reset defaults are assumed sufficient - */ -.globl memsetup -memsetup: - mov pc,lr +#include <common.h> +#include <asm/processor.h> + +int watchdog_init(void) +{ + return 0; +} + +void reset_cpu(unsigned long ignored) +{ + while (1) + ; +} diff --git a/doc/README.sh7785lcr b/doc/README.sh7785lcr new file mode 100644 index 0000000000..077027695d --- /dev/null +++ b/doc/README.sh7785lcr @@ -0,0 +1,83 @@ +======================================== +Renesas Technology R0P7785LC0011RL board +======================================== + +This board specification: +========================= + +The R0P7785LC0011RL(board config name:sh7785lcr) has the following device: + + - SH7785 (SH-4A) + - DDR2-SDRAM 512MB + - NOR Flash 64MB + - 2D Graphic controller + - SATA controller + - Ethernet controller + - USB host/peripheral controller + - SD controller + - I2C controller + - RTC + +This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). + + phys address | S2-5 = OFF | S2-5 = ON + -------------------------------+---------------+--------------- + 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + 0x14000000 - 0x17ffffff(CS5) | I2C | USB + 0x18000000 - 0x1bffffff(CS6) | reserved | SD + 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + + +This board specific command: +============================ + +This board has the following its specific command: + + - hwtest + - printmac + - setmac + + +1. hwtest + +This is self-check command. This command has the following options: + + - all : test all hardware + - pld : output PLD version + - led : turn on LEDs + - dipsw : test DIP switch + - sm107 : output SM107 version + - net : check RTL8110 ID + - sata : check SiI3512 ID + - net : output PCI slot device ID + +i.e) +=> hwtest led +turn on LEDs 3, 5, 7, 9 +turn on LEDs 4, 6, 8, 10 + +=> hwtest net +Ethernet OK + + +2. printmac + +This command outputs MAC address of this board. + +i.e) +=> printmac +MAC = 00:00:87:**:**:** + + +3. setmac + +This command writes MAC address of this board. + +i.e) +=> setmac 00:00:87:**:**:** + diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index b7b3a75bc9..264553dfa8 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -76,12 +76,20 @@ static const struct fsl_i2c *i2c_dev[2] = { * For this table, the values are based on a value of 1 for the DFSR * register. See the application note AN2919 "Determining the I2C Frequency * Divider Ratio for SCL" + * + * ColdFire I2C frequency dividers for FDR values are different from + * PowerPC. The protocol to use the I2C module is still the same. + * A different table is defined and are based on MCF5xxx user manual. + * */ static const struct { unsigned short divider; +#ifdef __PPC__ u8 dfsr; +#endif u8 fdr; } fsl_i2c_speed_map[] = { +#ifdef __PPC__ {160, 1, 32}, {192, 1, 33}, {224, 1, 34}, {256, 1, 35}, {288, 1, 0}, {320, 1, 1}, {352, 6, 1}, {384, 1, 2}, {416, 6, 2}, {448, 1, 38}, {480, 1, 3}, {512, 1, 39}, {544, 11, 3}, {576, 1, 4}, @@ -98,6 +106,25 @@ static const struct { {20480, 1, 25}, {24576, 1, 26}, {28672, 1, 62}, {30720, 1, 27}, {32768, 1, 63}, {36864, 1, 28}, {40960, 1, 29}, {49152, 1, 30}, {61440, 1, 31}, {-1, 1, 31} +#elif defined(__M68K__) + {20, 32}, {22, 33}, {24, 34}, {26, 35}, + {28, 0}, {28, 36}, {30, 1}, {32, 37}, + {34, 2}, {36, 38}, {40, 3}, {40, 39}, + {44, 4}, {48, 5}, {48, 40}, {56, 6}, + {56, 41}, {64, 42}, {68, 7}, {72, 43}, + {80, 8}, {80, 44}, {88, 9}, {96, 41}, + {104, 10}, {112, 42}, {128, 11}, {128, 43}, + {144, 12}, {160, 13}, {160, 48}, {192, 14}, + {192, 49}, {224, 50}, {240, 15}, {256, 51}, + {288, 16}, {320, 17}, {320, 52}, {384, 18}, + {384, 53}, {448, 54}, {480, 19}, {512, 55}, + {576, 20}, {640, 21}, {640, 56}, {768, 22}, + {768, 57}, {960, 23}, {896, 58}, {1024, 59}, + {1152, 24}, {1280, 25}, {1280, 60}, {1536, 26}, + {1536, 61}, {1792, 62}, {1920, 27}, {2048, 63}, + {2304, 28}, {2560, 29}, {3072, 30}, {3840, 31}, + {-1, 31} +#endif }; /** @@ -126,12 +153,17 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, for (i = 0; i < ARRAY_SIZE(fsl_i2c_speed_map); i++) if (fsl_i2c_speed_map[i].divider >= divider) { - u8 fdr, dfsr; + u8 fdr; +#ifdef __PPC__ + u8 dfsr; dfsr = fsl_i2c_speed_map[i].dfsr; +#endif fdr = fsl_i2c_speed_map[i].fdr; speed = i2c_clk / fsl_i2c_speed_map[i].divider; writeb(fdr, &dev->fdr); /* set bus speed */ +#ifdef __PPC__ writeb(dfsr, &dev->dfsrr); /* set default filter */ +#endif break; } diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 19233105a2..b0abe6e523 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -37,6 +37,7 @@ endif COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o +COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o endif COBJS := $(COBJS-y) diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c new file mode 100644 index 0000000000..159fe76aa5 --- /dev/null +++ b/drivers/mtd/nand/s3c64xx.c @@ -0,0 +1,319 @@ +/* + * (C) Copyright 2006 DENX Software Engineering + * + * Implementation for U-Boot 1.1.6 by Samsung + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <nand.h> +#include <s3c6400.h> + +#include <asm/io.h> +#include <asm/errno.h> + +#define MAX_CHIPS 2 +static int nand_cs[MAX_CHIPS] = {0, 1}; + +#ifdef CONFIG_NAND_SPL +#define printf(arg...) do {} while (0) +#endif + +/* Nand flash definition values by jsgood */ +#ifdef S3C_NAND_DEBUG +/* + * Function to print out oob buffer for debugging + * Written by jsgood + */ +static void print_oob(const char *header, struct mtd_info *mtd) +{ + int i; + struct nand_chip *chip = mtd->priv; + + printf("%s:\t", header); + + for (i = 0; i < 64; i++) + printf("%02x ", chip->oob_poi[i]); + + printf("\n"); +} +#endif /* S3C_NAND_DEBUG */ + +#ifdef CONFIG_NAND_SPL +static u_char nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readb(this->IO_ADDR_R); +} + +static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + writeb(buf[i], this->IO_ADDR_W); +} + +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + buf[i] = readb(this->IO_ADDR_R); +} +#endif + +static void s3c_nand_select_chip(struct mtd_info *mtd, int chip) +{ + int ctrl = readl(NFCONT); + + switch (chip) { + case -1: + ctrl |= 6; + break; + case 0: + ctrl &= ~2; + break; + case 1: + ctrl &= ~4; + break; + default: + return; + } + + writel(ctrl, NFCONT); +} + +/* + * Hardware specific access to control-lines function + * Written by jsgood + */ +static void s3c_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + this->IO_ADDR_W = (void __iomem *)NFCMMD; + else if (ctrl & NAND_ALE) + this->IO_ADDR_W = (void __iomem *)NFADDR; + else + this->IO_ADDR_W = (void __iomem *)NFDATA; + if (ctrl & NAND_NCE) + s3c_nand_select_chip(mtd, *(int *)this->priv); + else + s3c_nand_select_chip(mtd, -1); + } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); +} + +/* + * Function for checking device ready pin + * Written by jsgood + */ +static int s3c_nand_device_ready(struct mtd_info *mtdinfo) +{ + return !!(readl(NFSTAT) & NFSTAT_RnB); +} + +#ifdef CFG_S3C_NAND_HWECC +/* + * This function is called before encoding ecc codes to ready ecc engine. + * Written by jsgood + */ +static void s3c_nand_enable_hwecc(struct mtd_info *mtd, int mode) +{ + u_long nfcont, nfconf; + + /* + * The original driver used 4-bit ECC for "new" MLC chips, i.e., for + * those with non-zero ID[3][3:2], which anyway only holds for ST + * (Numonyx) chips + */ + nfconf = readl(NFCONF) & ~NFCONF_ECC_4BIT; + + writel(nfconf, NFCONF); + + /* Initialize & unlock */ + nfcont = readl(NFCONT); + nfcont |= NFCONT_INITECC; + nfcont &= ~NFCONT_MECCLOCK; + + if (mode == NAND_ECC_WRITE) + nfcont |= NFCONT_ECC_ENC; + else if (mode == NAND_ECC_READ) + nfcont &= ~NFCONT_ECC_ENC; + + writel(nfcont, NFCONT); +} + +/* + * This function is called immediately after encoding ecc codes. + * This function returns encoded ecc codes. + * Written by jsgood + */ +static int s3c_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) +{ + u_long nfcont, nfmecc0; + + /* Lock */ + nfcont = readl(NFCONT); + nfcont |= NFCONT_MECCLOCK; + writel(nfcont, NFCONT); + + nfmecc0 = readl(NFMECC0); + + ecc_code[0] = nfmecc0 & 0xff; + ecc_code[1] = (nfmecc0 >> 8) & 0xff; + ecc_code[2] = (nfmecc0 >> 16) & 0xff; + ecc_code[3] = (nfmecc0 >> 24) & 0xff; + + return 0; +} + +/* + * This function determines whether read data is good or not. + * If SLC, must write ecc codes to controller before reading status bit. + * If MLC, status bit is already set, so only reading is needed. + * If status bit is good, return 0. + * If correctable errors occured, do that. + * If uncorrectable errors occured, return -1. + * Written by jsgood + */ +static int s3c_nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) +{ + int ret = -1; + u_long nfestat0, nfmeccdata0, nfmeccdata1, err_byte_addr; + u_char err_type, repaired; + + /* SLC: Write ecc to compare */ + nfmeccdata0 = (calc_ecc[1] << 16) | calc_ecc[0]; + nfmeccdata1 = (calc_ecc[3] << 16) | calc_ecc[2]; + writel(nfmeccdata0, NFMECCDATA0); + writel(nfmeccdata1, NFMECCDATA1); + + /* Read ecc status */ + nfestat0 = readl(NFESTAT0); + err_type = nfestat0 & 0x3; + + switch (err_type) { + case 0: /* No error */ + ret = 0; + break; + + case 1: + /* + * 1 bit error (Correctable) + * (nfestat0 >> 7) & 0x7ff :error byte number + * (nfestat0 >> 4) & 0x7 :error bit number + */ + err_byte_addr = (nfestat0 >> 7) & 0x7ff; + repaired = dat[err_byte_addr] ^ (1 << ((nfestat0 >> 4) & 0x7)); + + printf("S3C NAND: 1 bit error detected at byte %ld. " + "Correcting from 0x%02x to 0x%02x...OK\n", + err_byte_addr, dat[err_byte_addr], repaired); + + dat[err_byte_addr] = repaired; + + ret = 1; + break; + + case 2: /* Multiple error */ + case 3: /* ECC area error */ + printf("S3C NAND: ECC uncorrectable error detected. " + "Not correctable.\n"); + ret = -1; + break; + } + + return ret; +} +#endif /* CFG_S3C_NAND_HWECC */ + +/* + * Board-specific NAND initialization. The following members of the + * argument are board-specific (per include/linux/mtd/nand.h): + * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device + * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device + * - hwcontrol: hardwarespecific function for accesing control-lines + * - dev_ready: hardwarespecific function for accesing device ready/busy line + * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must + * only be provided if a hardware ECC is available + * - eccmode: mode of ecc, see defines + * - chip_delay: chip dependent delay for transfering data from array to + * read regs (tR) + * - options: various chip options. They can partly be set to inform + * nand_scan about special functionality. See the defines for further + * explanation + * Members with a "?" were not set in the merged testing-NAND branch, + * so they are not set here either. + */ +int board_nand_init(struct nand_chip *nand) +{ + static int chip_n; + + if (chip_n >= MAX_CHIPS) + return -ENODEV; + + NFCONT_REG = (NFCONT_REG & ~NFCONT_WP) | NFCONT_ENABLE | 0x6; + + nand->IO_ADDR_R = (void __iomem *)NFDATA; + nand->IO_ADDR_W = (void __iomem *)NFDATA; + nand->cmd_ctrl = s3c_nand_hwcontrol; + nand->dev_ready = s3c_nand_device_ready; + nand->select_chip = s3c_nand_select_chip; + nand->options = 0; +#ifdef CONFIG_NAND_SPL + nand->read_byte = nand_read_byte; + nand->write_buf = nand_write_buf; + nand->read_buf = nand_read_buf; +#endif + +#ifdef CFG_S3C_NAND_HWECC + nand->ecc.hwctl = s3c_nand_enable_hwecc; + nand->ecc.calculate = s3c_nand_calculate_ecc; + nand->ecc.correct = s3c_nand_correct_data; + + /* + * If you get more than 1 NAND-chip with different page-sizes on the + * board one day, it will get more complicated... + */ + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.size = CFG_NAND_ECCSIZE; + nand->ecc.bytes = CFG_NAND_ECCBYTES; +#else + nand->ecc.mode = NAND_ECC_SOFT; +#endif /* ! CFG_S3C_NAND_HWECC */ + + nand->priv = nand_cs + chip_n++; + + return 0; +} diff --git a/drivers/net/Makefile b/drivers/net/Makefile index bcf31cbe27..a084000a93 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -41,6 +41,8 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o COBJS-$(CONFIG_DRIVER_LAN91C96) += lan91c96.o COBJS-$(CONFIG_MACB) += macb.o COBJS-$(CONFIG_MCFFEC) += mcffec.o +COBJS-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o +COBJS-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o COBJS-$(CONFIG_NATSEMI) += natsemi.o ifeq ($(CONFIG_DRIVER_NE2000),y) COBJS-y += ne2000.o diff --git a/cpu/mpc512x/fec.c b/drivers/net/mpc512x_fec.c index e9df7de5e7..7caeeda653 100644 --- a/cpu/mpc512x/fec.c +++ b/drivers/net/mpc512x_fec.c @@ -11,7 +11,7 @@ #include <malloc.h> #include <net.h> #include <miiphy.h> -#include "fec.h" +#include "mpc512x_fec.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/mpc512x/fec.h b/drivers/net/mpc512x_fec.h index 9c38502870..9c38502870 100644 --- a/cpu/mpc512x/fec.h +++ b/drivers/net/mpc512x_fec.h diff --git a/cpu/mpc5xxx/fec.c b/drivers/net/mpc5xxx_fec.c index bf804ee595..3d3eb8bae8 100644 --- a/cpu/mpc5xxx/fec.c +++ b/drivers/net/mpc5xxx_fec.c @@ -8,11 +8,11 @@ #include <common.h> #include <mpc5xxx.h> +#include <mpc5xxx_sdma.h> #include <malloc.h> #include <net.h> #include <miiphy.h> -#include "sdma.h" -#include "fec.h" +#include "mpc5xxx_fec.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/cpu/mpc5xxx/fec.h b/drivers/net/mpc5xxx_fec.h index 81756a5f6a..16c3e8e918 100644 --- a/cpu/mpc5xxx/fec.h +++ b/drivers/net/mpc5xxx_fec.h @@ -11,10 +11,6 @@ #ifndef __MPC5XXX_FEC_H #define __MPC5XXX_FEC_H -#include <common.h> -#include <mpc5xxx.h> -#include "sdma.h" - typedef unsigned long uint32; typedef unsigned short uint16; typedef unsigned char uint8; diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2384735a2c..f30014d32e 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -30,6 +30,7 @@ COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-y += ns16550.o COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o +COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-y += serial.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-y += serial_pl010.o diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c new file mode 100644 index 0000000000..9d8fcb9b49 --- /dev/null +++ b/drivers/serial/s3c64xx.c @@ -0,0 +1,172 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> + +#include <s3c6400.h> + +#ifdef CONFIG_SERIAL1 +#define UART_NR S3C64XX_UART0 + +#elif defined(CONFIG_SERIAL2) +#define UART_NR S3C64XX_UART1 + +#elif defined(CONFIG_SERIAL3) +#define UART_NR S3C64XX_UART2 + +#else +#error "Bad: you didn't configure serial ..." +#endif + +#define barrier() asm volatile("" ::: "memory") + +/* + * The coefficient, used to calculate the baudrate on S3C6400 UARTs is + * calculated as + * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT + * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1, + * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants: + */ +static const int udivslot[] = { + 0, + 0x0080, + 0x0808, + 0x0888, + 0x2222, + 0x4924, + 0x4a52, + 0x54aa, + 0x5555, + 0xd555, + 0xd5d5, + 0xddd5, + 0xdddd, + 0xdfdd, + 0xdfdf, + 0xffdf, +}; + +void serial_setbrg(void) +{ + DECLARE_GLOBAL_DATA_PTR; + s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); + u32 pclk = get_PCLK(); + u32 baudrate = gd->baudrate; + int i; + + i = (pclk / baudrate) % 16; + + uart->UBRDIV = pclk / baudrate / 16 - 1; + uart->UDIVSLOT = udivslot[i]; + + for (i = 0; i < 100; i++) + barrier(); +} + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + */ +int serial_init(void) +{ + s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); + + /* reset and enable FIFOs, set triggers to the maximum */ + uart->UFCON = 0xff; + uart->UMCON = 0; + /* 8N1 */ + uart->ULCON = 3; + /* No interrupts, no DMA, pure polling */ + uart->UCON = 5; + + serial_setbrg(); + + return 0; +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_getc(void) +{ + s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); + + /* wait for character to arrive */ + while (!(uart->UTRSTAT & 0x1)); + + return uart->URXH & 0xff; +} + +#ifdef CONFIG_MODEM_SUPPORT +static int be_quiet; +void disable_putc(void) +{ + be_quiet = 1; +} + +void enable_putc(void) +{ + be_quiet = 0; +} +#endif + + +/* + * Output a single byte to the serial port. + */ +void serial_putc(const char c) +{ + s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); + +#ifdef CONFIG_MODEM_SUPPORT + if (be_quiet) + return; +#endif + + /* wait for room in the tx FIFO */ + while (!(uart->UTRSTAT & 0x2)); + + uart->UTXH = c; + + /* If \n, also do \r */ + if (c == '\n') + serial_putc('\r'); +} + +/* + * Test whether a character is in the RX buffer + */ +int serial_tstc(void) +{ + s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR); + + return uart->UTRSTAT & 0x1; +} + +void serial_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 2b9eeed47e..61c2b82c0a 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -20,14 +20,20 @@ #include <common.h> #include <asm/processor.h> -#if defined (CONFIG_CONS_SCIF0) -#define SCIF_BASE SCIF0_BASE -#elif defined (CONFIG_CONS_SCIF1) -#define SCIF_BASE SCIF1_BASE -#elif defined (CONFIG_CONS_SCIF2) -#define SCIF_BASE SCIF2_BASE +#if defined(CONFIG_CONS_SCIF0) +# define SCIF_BASE SCIF0_BASE +#elif defined(CONFIG_CONS_SCIF1) +# define SCIF_BASE SCIF1_BASE +#elif defined(CONFIG_CONS_SCIF2) +# define SCIF_BASE SCIF2_BASE +#elif defined(CONFIG_CONS_SCIF3) +# define SCIF_BASE SCIF3_BASE +#elif defined(CONFIG_CONS_SCIF4) +# define SCIF_BASE SCIF4_BASE +#elif defined(CONFIG_CONS_SCIF5) +# define SCIF_BASE SCIF5_BASE #else -#error "Default SCIF doesn't set....." +# error "Default SCIF doesn't set....." #endif /* Base register */ @@ -36,7 +42,8 @@ #define SCSCR (vu_short *)(SCIF_BASE + 0x8) #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ +#if defined(CONFIG_CPU_SH7720) || \ + (defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A)) # define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ # define SCFTDR (vu_char *)(SCIF_BASE + 0x20) # define SCFRDR (vu_char *)(SCIF_BASE + 0x24) @@ -55,7 +62,7 @@ # define LSR_ORER 1 # define FIFOLEVEL_MASK 0xFF #elif defined(CONFIG_CPU_SH7763) -# if defined (CONFIG_CONS_SCIF2) +# if defined(CONFIG_CONS_SCIF2) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) # define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 @@ -68,9 +75,20 @@ # define LSR_ORER 1 # define FIFOLEVEL_MASK 0xFF # endif +#elif defined(CONFIG_CPU_SH7723) +# if defined(CONIFG_SCIF_A) +# define SCLSR SCFSR +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x3F +#else +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#endif #elif defined(CONFIG_CPU_SH7750) || \ defined(CONFIG_CPU_SH7751) || \ - defined(CONFIG_CPU_SH7722) + defined(CONFIG_CPU_SH7722) || \ + defined(CONFIG_CPU_SH7203) # define SCSPTR (vu_short *)(SCIF_BASE + 0x20) # define SCLSR (vu_short *)(SCIF_BASE + 0x24) # define LSR_ORER 1 @@ -89,6 +107,9 @@ /* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) # define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +#elif defined(CONFIG_CPU_SH7723) && defined(CONFIG_SCIF_A) +/* SH7723 SCIFA use bus clock. So clock *2 */ +# define SCBRR_VALUE(bps, clk) (((clk*2*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ # define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif @@ -167,7 +188,7 @@ void serial_puts(const char *s) int serial_tstc(void) { - return serial_rx_fifo_level()? 1 : 0; + return serial_rx_fifo_level() ? 1 : 0; } #define FSR_ERR_CLEAR 0x0063 @@ -191,14 +212,16 @@ int serial_getc_check(void) handle_error(); if (*SCLSR & LSR_ORER) handle_error(); - return (status & (FSR_DR | FSR_RDF)); + return status & (FSR_DR | FSR_RDF); } int serial_getc(void) { unsigned short status; char ch; - while (!serial_getc_check()) ; + + while (!serial_getc_check()) + ; ch = *SCFRDR; status = *SCFSR; diff --git a/drivers/usb/usb_ohci.c b/drivers/usb/usb_ohci.c index fd60edbb3d..0bfa4d782a 100644 --- a/drivers/usb/usb_ohci.c +++ b/drivers/usb/usb_ohci.c @@ -69,6 +69,7 @@ #if defined(CONFIG_ARM920T) || \ defined(CONFIG_S3C2400) || \ defined(CONFIG_S3C2410) || \ + defined(CONFIG_S3C6400) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ defined(CONFIG_MPC5200) || \ diff --git a/examples/Makefile b/examples/Makefile index 66b354daaf..b0a8853661 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -67,6 +67,9 @@ endif ifeq ($(ARCH),sh) LOAD_ADDR = 0x8C000000 +ifeq ($(CPU),sh2) +BIG_ENDIAN=y +endif endif ifeq ($(ARCH),sparc) diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h index 0e10116d87..c11161f580 100644 --- a/include/asm-arm/arch-davinci/emac_defs.h +++ b/include/asm-arm/arch-davinci/emac_defs.h @@ -284,8 +284,8 @@ typedef struct { dv_reg USERPHYSEL1; } mdio_regs; -int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data); -int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data); +int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data); +int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data); typedef struct { diff --git a/include/asm-arm/arch-s3c64xx/hardware.h b/include/asm-arm/arch-s3c64xx/hardware.h new file mode 100644 index 0000000000..84d24c9384 --- /dev/null +++ b/include/asm-arm/arch-s3c64xx/hardware.h @@ -0,0 +1,63 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400 + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ARCH_HARDWARE_H_ +#define _ARCH_HARDWARE_H_ + +#include <asm/sizes.h> + +#ifndef __ASSEMBLY__ +#define UData(Data) ((unsigned long) (Data)) + +#define __REG(x) (*(vu_long *)(x)) +#define __REGl(x) (*(vu_long *)(x)) +#define __REGw(x) (*(vu_short *)(x)) +#define __REGb(x) (*(vu_char *)(x)) +#define __REG2(x, y) (*(vu_long *)((x) + (y))) +#else +#define UData(Data) (Data) + +#define __REG(x) (x) +#define __REGl(x) (x) +#define __REGw(x) (x) +#define __REGb(x) (x) +#define __REG2(x, y) ((x) + (y)) +#endif + +#define Fld(Size, Shft) (((Size) << 16) + (Shft)) + +#define FSize(Field) ((Field) >> 16) +#define FShft(Field) ((Field) & 0x0000FFFF) +#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) +#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) +#define F1stBit(Field) (UData (1) << FShft (Field)) + +#define FClrBit(Data, Bit) (Data = (Data & ~(Bit))) +#define FClrFld(Data, Field) (Data = (Data & ~FMsk(Field))) + +#define FInsrt(Value, Field) \ + (UData (Value) << FShft (Field)) + +#define FExtr(Data, Field) \ + ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) + +#endif /* _ARCH_HARDWARE_H_ */ diff --git a/include/asm-m68k/fsl_i2c.h b/include/asm-m68k/fsl_i2c.h index 4f71341327..2bc9bf434e 100644 --- a/include/asm-m68k/fsl_i2c.h +++ b/include/asm-m68k/fsl_i2c.h @@ -72,15 +72,6 @@ typedef struct fsl_i2c { #define I2C_DR 0xFF #define I2C_DR_SHIFT 0 #define I2C_DR_RES ~(I2C_DR) - - u8 dfsrr; /* I2C digital filter sampling rate register */ - u8 res5[3]; -#define I2C_DFSRR 0x3F -#define I2C_DFSRR_SHIFT 0 -#define I2C_DFSRR_RES ~(I2C_DR) - - /* Fill out the reserved block */ - u8 res6[0xE8]; } fsl_i2c_t; #endif /* _ASM_I2C_H_ */ diff --git a/include/asm-sh/cpu_sh2.h b/include/asm-sh/cpu_sh2.h new file mode 100644 index 0000000000..8bc9bc64c5 --- /dev/null +++ b/include/asm-sh/cpu_sh2.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH2_H_ +#define _ASM_CPU_SH2_H_ + +/* cache control */ +#define CCR_CACHE_STOP 0x00000008 +#define CCR_CACHE_ENABLE 0x00000005 +#define CCR_CACHE_ICI 0x00000008 + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_WAY_SHIFT 13 +#define CACHE_OC_NUM_ENTRIES 256 +#define CACHE_OC_ENTRY_SHIFT 4 + +#if defined(CONFIG_CPU_SH7203) +# include <asm/cpu_sh7203.h> +#else +# error "Unknown SH2 variant" +#endif + +#endif /* _ASM_CPU_SH2_H_ */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index 5a8a5a149c..b6cc6cfbd9 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -35,10 +35,14 @@ # include <asm/cpu_sh7750.h> #elif defined (CONFIG_CPU_SH7722) # include <asm/cpu_sh7722.h> +#elif defined (CONFIG_CPU_SH7723) +# include <asm/cpu_sh7723.h> #elif defined (CONFIG_CPU_SH7763) # include <asm/cpu_sh7763.h> #elif defined (CONFIG_CPU_SH7780) # include <asm/cpu_sh7780.h> +#elif defined (CONFIG_CPU_SH7785) +# include <asm/cpu_sh7785.h> #else # error "Unknown SH4 variant" #endif diff --git a/include/asm-sh/cpu_sh7203.h b/include/asm-sh/cpu_sh7203.h new file mode 100644 index 0000000000..77dcac43d3 --- /dev/null +++ b/include/asm-sh/cpu_sh7203.h @@ -0,0 +1,41 @@ +#ifndef _ASM_CPU_SH7203_H_ +#define _ASM_CPU_SH7203_H_ + +/* Cache */ +#define CCR1 0xFFFC1000 +#define CCR CCR1 + +/* PFC */ +#define PACR 0xA4050100 +#define PBCR 0xA4050102 +#define PCCR 0xA4050104 +#define PETCR 0xA4050106 + +/* Port Data Registers */ +#define PADR 0xA4050120 +#define PBDR 0xA4050122 +#define PCDR 0xA4050124 + +/* BSC */ + +/* SDRAM controller */ + +/* SCIF */ +#define SCSMR_0 0xFFFE8000 +#define SCIF0_BASE SCSMR_0 + +/* Timer(CMT) */ +#define CMSTR 0xFFFEC000 +#define CMCSR_0 0xFFFEC002 +#define CMCNT_0 0xFFFEC004 +#define CMCOR_0 0xFFFEC006 +#define CMCSR_1 0xFFFEC008 +#define CMCNT_1 0xFFFEC00A +#define CMCOR_1 0xFFFEC00C + +/* On chip oscillator circuits */ +#define FRQCR 0xA415FF80 +#define WTCNT 0xA415FF84 +#define WTCSR 0xA415FF86 + +#endif /* _ASM_CPU_SH7203_H_ */ diff --git a/include/asm-sh/cpu_sh7723.h b/include/asm-sh/cpu_sh7723.h new file mode 100644 index 0000000000..6dac6e9a01 --- /dev/null +++ b/include/asm-sh/cpu_sh7723.h @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2008 Renesas Solutions Corp. + * + * SH7723 Internal I/O register + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_CPU_SH7723_H_ +#define _ASM_CPU_SH7723_H_ + +#define CACHE_OC_NUM_WAYS 4 +#define CCR_CACHE_INIT 0x0000090d + +/* EXP */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* MMU */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* CACHE */ +#define CCR 0xFF00001C +#define RAMCR 0xFF000074 + +/* INTC */ + +/* BSC */ +#define CMNCR 0xFEC10000 +#define CS0BCR 0xFEC10004 +#define CS2BCR 0xFEC10008 +#define CS4BCR 0xFEC10010 +#define CS5ABCR 0xFEC10014 +#define CS5BBCR 0xFEC10018 +#define CS6ABCR 0xFEC1001C +#define CS6BBCR 0xFEC10020 +#define CS0WCR 0xFEC10024 +#define CS2WCR 0xFEC10028 +#define CS4WCR 0xFEC10030 +#define CS5AWCR 0xFEC10034 +#define CS5BWCR 0xFEC10038 +#define CS6AWCR 0xFEC1003C +#define CS6BWCR 0xFEC10040 +#define RBWTCNT 0xFEC10054 + +/* SBSC */ +#define SBSC_SDCR 0xFE400008 +#define SBSC_SDWCR 0xFE40000C +#define SBSC_SDPCR 0xFE400010 +#define SBSC_RTCSR 0xFE400014 +#define SBSC_RTCNT 0xFE400018 +#define SBSC_RTCOR 0xFE40001C +#define SBSC_RFCR 0xFE400020 + +/* DMAC */ + +/* CPG */ +#define FRQCR 0xA4150000 +#define VCLKCR 0xA4150004 +#define SCLKACR 0xA4150008 +#define SCLKBCR 0xA415000C +#define IRDACLKCR 0xA4150018 +#define PLLCR 0xA4150024 +#define DLLFRQ 0xA4150050 + +/* LOW POWER MODE */ +#define STBCR 0xA4150020 +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 + +/* RWDT */ +#define RWTCNT 0xA4520000 +#define RWTCSR 0xA4520004 +#define WTCNT RWTCNT + +/* TMU */ +#define TSTR 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 + +/* TPU */ + +/* CMT */ +#define CMSTR 0xA44A0000 +#define CMCSR 0xA44A0060 +#define CMCNT 0xA44A0064 +#define CMCOR 0xA44A0068 + +/* MSIOF */ + +/* SCIF */ +#define SCIF0_BASE 0xFFE00000 +#define SCIF1_BASE 0xFFE10000 +#define SCIF2_BASE 0xFFE20000 +#define SCIF3_BASE 0xa4e30000 +#define SCIF4_BASE 0xa4e40000 +#define SCIF5_BASE 0xa4e50000 + +/* RTC */ +/* IrDA */ +/* KEYSC */ +/* USB */ +/* IIC */ +/* FLCTL */ +/* VPU */ +/* VIO(CEU) */ +/* VIO(VEU) */ +/* VIO(BEU) */ +/* 2DG */ +/* LCDC */ +/* VOU */ +/* TSIF */ +/* SIU */ +/* ATAPI */ + +/* PFC */ +#define PACR 0xA4050100 +#define PBCR 0xA4050102 +#define PCCR 0xA4050104 +#define PDCR 0xA4050106 +#define PECR 0xA4050108 +#define PFCR 0xA405010A +#define PGCR 0xA405010C +#define PHCR 0xA405010E +#define PJCR 0xA4050110 +#define PKCR 0xA4050112 +#define PLCR 0xA4050114 +#define PMCR 0xA4050116 +#define PNCR 0xA4050118 +#define PQCR 0xA405011A +#define PRCR 0xA405011C +#define PSCR 0xA405011E +#define PTCR 0xA4050140 +#define PUCR 0xA4050142 +#define PVCR 0xA4050144 +#define PWCR 0xA4050146 +#define PXCR 0xA4050148 +#define PYCR 0xA405014A +#define PZCR 0xA405014C +#define PSELA 0xA405014E +#define PSELB 0xA4050150 +#define PSELC 0xA4050152 +#define PSELD 0xA4050154 +#define HIZCRA 0xA4050158 +#define HIZCRB 0xA405015A +#define HIZCRC 0xA405015C +#define HIZCRD 0xA405015E +#define MSELCRA 0xA4050180 +#define MSELCRB 0xA4050182 +#define PULCR 0xA4050184 +#define DRVCRA 0xA405018A +#define DRVCRB 0xA405018C + +/* I/O Port */ +#define PADR 0xA4050120 +#define PBDR 0xA4050122 +#define PCDR 0xA4050124 +#define PDDR 0xA4050126 +#define PEDR 0xA4050128 +#define PFDR 0xA405012A +#define PGDR 0xA405012C +#define PHDR 0xA405012E +#define PJDR 0xA4050130 +#define PKDR 0xA4050132 +#define PLDR 0xA4050134 +#define PMDR 0xA4050136 +#define PNDR 0xA4050138 +#define PQDR 0xA405013A +#define PRDR 0xA405013C +#define PSDR 0xA405013E +#define PTDR 0xA4050160 +#define PUDR 0xA4050162 +#define PVDR 0xA4050164 +#define PWDR 0xA4050166 +#define PYDR 0xA4050168 +#define PZDR 0xA405016A + +/* UBC */ +/* H-UDI */ + +#endif /* _ASM_CPU_SH7723_H_ */ diff --git a/include/asm-sh/cpu_sh7785.h b/include/asm-sh/cpu_sh7785.h new file mode 100644 index 0000000000..4a4dfc9042 --- /dev/null +++ b/include/asm-sh/cpu_sh7785.h @@ -0,0 +1,156 @@ +#ifndef _ASM_CPU_SH7785_H_ +#define _ASM_CPU_SH7785_H_ + +/* + * Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * Copyright (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b + +/* Exceptions */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* Cache Controller */ +#define CCR 0xFF00001C +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C +#define RAMCR 0xFF000074 + +/* Watchdog Timer and Reset */ +#define WTCNT WDTCNT +#define WDTST 0xFFCC0000 +#define WDTCSR 0xFFCC0004 +#define WDTBST 0xFFCC0008 +#define WDTCNT 0xFFCC0010 +#define WDTBCNT 0xFFCC0018 + +/* Timer Unit */ +#define TSTR TSTR0 +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR1 0xFFDC0004 +#define TCOR3 0xFFDC0008 +#define TCNT3 0xFFDC000C +#define TCR3 0xFFDC0010 +#define TCOR4 0xFFDC0014 +#define TCNT4 0xFFDC0018 +#define TCR4 0xFFDC001C +#define TCOR5 0xFFDC0020 +#define TCNT5 0xFFDC0024 +#define TCR5 0xFFDC0028 + +/* Serial Communication Interface with FIFO */ +#define SCIF1_BASE 0xffeb0000 + +/* LBSC */ +#define MMSELR 0xfc400020 +#define LBSC_BASE 0xff800000 +#define BCR (LBSC_BASE + 0x1000) +#define CS0BCR (LBSC_BASE + 0x2000) +#define CS1BCR (LBSC_BASE + 0x2010) +#define CS2BCR (LBSC_BASE + 0x2020) +#define CS3BCR (LBSC_BASE + 0x2030) +#define CS4BCR (LBSC_BASE + 0x2040) +#define CS5BCR (LBSC_BASE + 0x2050) +#define CS6BCR (LBSC_BASE + 0x2060) +#define CS0WCR (LBSC_BASE + 0x2008) +#define CS1WCR (LBSC_BASE + 0x2018) +#define CS2WCR (LBSC_BASE + 0x2028) +#define CS3WCR (LBSC_BASE + 0x2038) +#define CS4WCR (LBSC_BASE + 0x2048) +#define CS5WCR (LBSC_BASE + 0x2058) +#define CS6WCR (LBSC_BASE + 0x2068) +#define CS5PCR (LBSC_BASE + 0x2070) +#define CS6PCR (LBSC_BASE + 0x2080) + +/* PCI Controller */ +#define SH7780_PCIECR 0xFE000008 +#define SH7780_PCIVID 0xFE040000 +#define SH7780_PCIDID 0xFE040002 +#define SH7780_PCICMD 0xFE040004 +#define SH7780_PCISTATUS 0xFE040006 +#define SH7780_PCIRID 0xFE040008 +#define SH7780_PCIPIF 0xFE040009 +#define SH7780_PCISUB 0xFE04000A +#define SH7780_PCIBCC 0xFE04000B +#define SH7780_PCICLS 0xFE04000C +#define SH7780_PCILTM 0xFE04000D +#define SH7780_PCIHDR 0xFE04000E +#define SH7780_PCIBIST 0xFE04000F +#define SH7780_PCIIBAR 0xFE040010 +#define SH7780_PCIMBAR0 0xFE040014 +#define SH7780_PCIMBAR1 0xFE040018 +#define SH7780_PCISVID 0xFE04002C +#define SH7780_PCISID 0xFE04002E +#define SH7780_PCICP 0xFE040034 +#define SH7780_PCIINTLINE 0xFE04003C +#define SH7780_PCIINTPIN 0xFE04003D +#define SH7780_PCIMINGNT 0xFE04003E +#define SH7780_PCIMAXLAT 0xFE04003F +#define SH7780_PCICID 0xFE040040 +#define SH7780_PCINIP 0xFE040041 +#define SH7780_PCIPMC 0xFE040042 +#define SH7780_PCIPMCSR 0xFE040044 +#define SH7780_PCIPMCSRBSE 0xFE040046 +#define SH7780_PCI_CDD 0xFE040047 +#define SH7780_PCICR 0xFE040100 +#define SH7780_PCILSR0 0xFE040104 +#define SH7780_PCILSR1 0xFE040108 +#define SH7780_PCILAR0 0xFE04010C +#define SH7780_PCILAR1 0xFE040110 +#define SH7780_PCIIR 0xFE040114 +#define SH7780_PCIIMR 0xFE040118 +#define SH7780_PCIAIR 0xFE04011C +#define SH7780_PCICIR 0xFE040120 +#define SH7780_PCIAINT 0xFE040130 +#define SH7780_PCIAINTM 0xFE040134 +#define SH7780_PCIBMIR 0xFE040138 +#define SH7780_PCIPAR 0xFE0401C0 +#define SH7780_PCIPINT 0xFE0401CC +#define SH7780_PCIPINTM 0xFE0401D0 +#define SH7780_PCIMBR0 0xFE0401E0 +#define SH7780_PCIMBMR0 0xFE0401E4 +#define SH7780_PCIMBR1 0xFE0401E8 +#define SH7780_PCIMBMR1 0xFE0401EC +#define SH7780_PCIMBR2 0xFE0401F0 +#define SH7780_PCIMBMR2 0xFE0401F4 +#define SH7780_PCIIOBR 0xFE0401F8 +#define SH7780_PCIIOBMR 0xFE0401FC +#define SH7780_PCICSCR0 0xFE040210 +#define SH7780_PCICSCR1 0xFE040214 +#define SH7780_PCICSAR0 0xFE040218 +#define SH7780_PCICSAR1 0xFE04021C +#define SH7780_PCIPDR 0xFE040220 + +#endif /* _ASM_CPU_SH7780_H_ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 388aa69c64..938a89cff5 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -1,6 +1,9 @@ #ifndef _ASM_SH_PROCESSOR_H_ #define _ASM_SH_PROCESSOR_H_ -#if defined CONFIG_SH3 +#if defined(CONFIG_SH2) || \ + defined (CONFIG_SH2A) +# include <asm/cpu_sh2.h> +#elif defined (CONFIG_SH3) # include <asm/cpu_sh3.h> #elif defined (CONFIG_SH4) || \ defined (CONFIG_SH4A) diff --git a/include/common.h b/include/common.h index de3d595ed2..a394988b5c 100644 --- a/include/common.h +++ b/include/common.h @@ -490,7 +490,8 @@ int prt_mpc8220_clks (void); ulong get_OPB_freq (void); ulong get_PCI_freq (void); #endif -#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X) +#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \ + defined(CONFIG_LH7A40X) || defined(CONFIG_S3C6400) void s3c2410_irq(void); #define ARM920_IRQ_CALLBACK s3c2410_irq ulong get_FCLK (void); diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e8361321f1..b32eabe9a3 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -102,12 +102,15 @@ /* I2C */ #define CONFIG_FSL_I2C -#define CONFIG_HARD_I2C /* I2C with hw support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_HARD_I2C /* I2C with hw support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 80000 #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_OFFSET 0x00000300 #define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (gpio->par_qspi) +#define CFG_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) +#define CFG_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index c2f5dd9fa4..6bf2d99c9c 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -41,8 +41,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index f2c2317f50..9f78f6ebc8 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -118,6 +118,17 @@ #define CONFIG_HOSTNAME M5253DEMO +/* I2C */ +#define CONFIG_FSL_I2C +#define CONFIG_HARD_I2C /* I2C with hw support */ +#define CFG_I2C_SPEED 80000 +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_OFFSET 0x00000280 +#define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (*(u32 *) (CFG_MBAR+0x19C)) +#define CFG_I2C_PINMUX_CLR (0xFFFFE7FF) +#define CFG_I2C_PINMUX_SET (0) + #define CFG_PROMPT "=> " #define CFG_LONGHELP /* undef to save memory */ diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h index 12f9783abe..78a1b93cf7 100644 --- a/include/configs/M5271EVB.h +++ b/include/configs/M5271EVB.h @@ -42,7 +42,7 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG /* disable watchdog */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 7edd322bdd..fc457e3bcb 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -40,8 +40,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_WATCHDOG #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ @@ -91,6 +91,7 @@ #ifdef CONFIG_MCFFEC # define CONFIG_NET_MULTI 1 # define CONFIG_MII 1 +# define CONFIG_MII_INIT 1 # define CFG_DISCOVER_PHY # define CFG_RX_ETH_BUFFER 8 # define CFG_FAULT_ECHO_LINK_DOWN diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 30c70e5796..430af6bfa2 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -45,7 +45,7 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } /* Configuration for environment @@ -118,6 +118,9 @@ #define CFG_I2C_SLAVE 0x7F #define CFG_I2C_OFFSET 0x00000300 #define CFG_IMMR CFG_MBAR +#define CFG_I2C_PINMUX_REG (gpio_reg->par_feci2c) +#define CFG_I2C_PINMUX_CLR (0xFFF0) +#define CFG_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC #define CONFIG_ETHADDR 00:06:3b:01:41:55 diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 279a12be7b..eb59c250db 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -40,8 +40,8 @@ #define CONFIG_MCFUART #define CFG_UART_PORT (0) -#define CONFIG_BAUDRATE 19200 -#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 588c00c629..cf58239df3 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -140,9 +140,8 @@ "u-boot=u-boot.bin\0" \ "load=tftp ${loadaddr) ${u-boot}\0" \ "upd=run load; run prog\0" \ - "prog=prot off 0 " MK_STR(CFG_UBOOT_END)\ - "; era 0 " MK_STR(CFG_UBOOT_END) \ - "2ffff;" \ + "prog=prot off 0 " MK_STR(CFG_UBOOT_END) \ + "; era 0 " MK_STR(CFG_UBOOT_END) " ;" \ "cp.b ${loadaddr} 0 ${filesize};" \ "save\0" \ "" diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 476aba3478..ad9c15eb9b 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -157,7 +157,7 @@ " " MK_STR(CFG_UBOOT_END) ";" \ "era " MK_STR(CFG_FLASH_BASE) " " \ MK_STR(CFG_UBOOT_END) ";" \ - "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE)\ + "cp.b ${loadaddr} " MK_STR(CFG_FLASH_BASE) \ " ${filesize}; save\0" \ "" #endif @@ -388,9 +388,6 @@ #endif #endif -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ -#define CFG_FLASH_CHECKSUM - /* * This is setting for JFFS2 support in u-boot. * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 4037efb733..af6723c637 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -226,7 +226,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_CFG1 0x73711630 -#define CFG_SDRAM_CFG2 0x46370000 +#define CFG_SDRAM_CFG2 0x46770000 #define CFG_SDRAM_CTRL 0xE10B0000 #define CFG_SDRAM_EMOD 0x40010000 #define CFG_SDRAM_MODE 0x018D0000 diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index a14c55bc33..248db53d9a 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -212,7 +212,7 @@ */ #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_CFG1 0x73711630 -#define CFG_SDRAM_CFG2 0x46370000 +#define CFG_SDRAM_CFG2 0x46770000 #define CFG_SDRAM_CTRL 0xE10B0000 #define CFG_SDRAM_EMOD 0x40010000 #define CFG_SDRAM_MODE 0x018D0000 diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h index 5f74afb0d7..f516c4602c 100644 --- a/include/configs/ads5121.h +++ b/include/configs/ads5121.h @@ -210,6 +210,7 @@ #define CFG_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ #define CFG_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ +#define CFG_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ /* Use SRAM for initial stack */ #define CFG_INIT_RAM_ADDR CFG_SRAM_BASE /* Initial RAM address */ diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h new file mode 100644 index 0000000000..81a118dc5a --- /dev/null +++ b/include/configs/ap325rxa.h @@ -0,0 +1,177 @@ +/* + * Configuation settings for the Renesas Solutions AP-325RXA board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __AP325RXA_H +#define __AP325RXA_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7723 1 +#define CONFIG_AP325RXA 1 + +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +#define CONFIG_BAUDRATE 38400 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC2,38400" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9118 */ +#define CONFIG_DRIVER_SMC911X 1 +#define CONFIG_DRIVER_SMC911X_32_BIT 1 +#define CONFIG_DRIVER_SMC911X_BASE 0xB6080000 + +/* MEMORY */ +#define AP325RXA_SDRAM_BASE (0x88000000) +#define AP325RXA_FLASH_BASE_1 (0xA0000000) +#define AP325RXA_FLASH_BANK_SIZE (128 * 1024 * 1024) + +/* undef to save memory */ +#define CFG_LONGHELP +/* Monitor Command Prompt */ +#define CFG_PROMPT "=> " +/* Buffer size for input from the Console */ +#define CFG_CBSIZE 256 +/* Buffer size for Console output */ +#define CFG_PBSIZE 256 +/* max args accepted for monitor commands */ +#define CFG_MAXARGS 16 +/* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 38400 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_SCIF_A 1 /* SH7723 has SCIF and SCIFA */ +#define CONFIG_CONS_SCIF5 1 + +/* Suppress display of console information at boot */ +#undef CFG_CONSOLE_INFO_QUIET +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (AP325RXA_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Enable alternate, more extensive, memory test */ +#undef CFG_ALT_MEMTEST +/* Scratch address used by the alternate memory test */ +#undef CFG_MEMTEST_SCRATCH + +/* Enable temporary baudrate change while serial download */ +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (AP325RXA_SDRAM_BASE) +/* maybe more, but if so u-boot doesn't know about it... */ +#define CFG_SDRAM_SIZE (128 * 1024 * 1024) +/* default load address for scripts ?!? */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_BASE (AP325RXA_FLASH_BASE_1) +/* Monitor size */ +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO +/* Physical start address of Flash memory */ +#define CFG_FLASH_BASE (AP325RXA_FLASH_BASE_1) +/* Max number of sectors on each Flash chip */ +#define CFG_MAX_FLASH_SECT 512 + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xB4180000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x200 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x200 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x210 /* alternate register offset */ + +/* if you use all NOR Flash , you change dip-switch. Please see Manual. */ +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * AP325RXA_FLASH_BANK_SIZE)} + +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +/* + * Use hardware flash sectors protection instead + * of U-Boot software protection + */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __AP325RXA_H */ diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h new file mode 100644 index 0000000000..23598f33ca --- /dev/null +++ b/include/configs/rsk7203.h @@ -0,0 +1,107 @@ +/* + * Configuation settings for the Renesas Technology RSK 7203 + * + * Copyright (C) 2008 Nobuhiro Iwamatsu + * Copyright (C) 2008 Renesas Solutions Corp. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __RSK7203_H +#define __RSK7203_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH2 1 +#define CONFIG_SH2A 1 +#define CONFIG_CPU_SH7203 1 +#define CONFIG_RSK7203 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_CACHE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_LOADADDR 0x0C100000 /* RSK7203_SDRAM_BASE + 1MB */ + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* MEMORY */ +#define RSK7203_SDRAM_BASE 0x0C000000 +#define RSK7203_FLASH_BASE_1 0x20000000 /* Non cache */ +#define RSK7203_FLASH_BANK_SIZE (4 * 1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +/* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 + +#define CFG_MEMTEST_START RSK7203_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (3 * 1024 * 1024)) + +#define CFG_SDRAM_BASE RSK7203_SDRAM_BASE +#define CFG_SDRAM_SIZE (32 * 1024 * 1024) + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 1024 * 1024) +#define CFG_MONITOR_BASE RSK7203_FLASH_BASE_1 +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_GBL_DATA_SIZE 256 +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_BASE RSK7203_FLASH_BASE_1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 64 +#define CFG_MAX_FLASH_BANKS 1 + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (64 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 12000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define CMT_CLK_DIVIDER 32 /* 8 (default), 32, 128 or 512 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER) + +#endif /* __RSK7203_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 18675c2d53..74f6e3a89b 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -179,7 +179,7 @@ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) */ #define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ -#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ /* * Now the NAND chip has to be defined (no autodetection used!) diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h new file mode 100644 index 0000000000..efdb163dd2 --- /dev/null +++ b/include/configs/sh7785lcr.h @@ -0,0 +1,167 @@ +/* + * Configuation settings for the Renesas Technology R0P7785LC0011RL board + * + * Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SH7785LCR_H +#define __SH7785LCR_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_CPU_SH7785 1 +#define CONFIG_SH7785LCR 1 + +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_RUN +#define CONFIG_CMD_ENV + +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC1,115200 root=/dev/nfs ip=dhcp" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootdevice=0:1\0" \ + "usbload=usb reset;usbboot;usb stop;bootm\0" + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* MEMORY */ +#define SH7785LCR_SDRAM_BASE (0x08000000) +#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024) +#define SH7785LCR_FLASH_BASE_1 (0xa0000000) +#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024) +#define SH7785LCR_USB_BASE (0xb4000000) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +#define CFG_BAUDRATE_TABLE { 115200 } + +/* SCIF */ +#define CONFIG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF1 1 +#define CONFIG_SCIF_EXT_CLOCK 1 +#undef CFG_CONSOLE_INFO_QUIET +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + + +#define CFG_MEMTEST_START (SH7785LCR_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + \ + (SH7785LCR_SDRAM_SIZE) - \ + 4 * 1024 * 1024) +#undef CFG_ALT_MEMTEST +#undef CFG_MEMTEST_SCRATCH +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (SH7785LCR_SDRAM_BASE) +#define CFG_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE) +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +#define CFG_MONITOR_BASE (SH7785LCR_FLASH_BASE_1) +#define CFG_MONITOR_LEN (512 * 1024) +#define CFG_MALLOC_LEN (512 * 1024) +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CONFIG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#undef CFG_FLASH_QUIET_TEST +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_BASE (SH7785LCR_FLASH_BASE_1) +#define CFG_MAX_FLASH_SECT 512 + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + \ + (0 * SH7785LCR_FLASH_BANK_SIZE) } + +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* R8A66597 */ +#define LITTLEENDIAN /* for include/usb.h */ +#define CONFIG_USB_R8A66597_HCD +#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE +#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */ +#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */ +#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */ + +/* PCI Controller */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7780_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ + +/* Network device (RTL8169) support */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8169 + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (256 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +/* The SCIF used external clock. system clock only used timer. */ +#define CONFIG_SYS_CLK_FREQ 50000000 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __SH7785LCR_H */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h new file mode 100644 index 0000000000..f0c146e3ef --- /dev/null +++ b/include/configs/smdk6400.h @@ -0,0 +1,307 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Gary Jennejohn <gj@denx.de> + * David Mueller <d.mueller@elsoft.ch> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * Configuation settings for the SAMSUNG SMDK6400(mDirac-III) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_S3C6400 1 /* in a SAMSUNG S3C6400 SoC */ +#define CONFIG_S3C64XX 1 /* in a SAMSUNG S3C64XX Family */ +#define CONFIG_SMDK6400 1 /* on a SAMSUNG SMDK6400 Board */ + +#define CFG_SDRAM_BASE 0x50000000 + +/* input clock of PLL: SMDK6400 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000) +#define CONFIG_ENABLE_MMU +#endif + +#define CONFIG_MEMORY_UPPER_CODE + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +/* + * Architecture magic and machine type + */ +#define MACH_TYPE 1270 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 1024 * 1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ +#define CS8900_BASE 0x18800300 +#define CS8900_BUS16 1 /* follow the Linux driver */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK6400 */ + +#define CFG_HUSH_PARSER /* use "hush" command parser */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#define CONFIG_CMDLINE_EDITING + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NAND +#if defined(CONFIG_BOOT_ONENAND) +#define CONFIG_CMD_ONENAND +#endif +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#if (CONFIG_COMMANDS & CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "SMDK6400 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE 384 /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* memtest works on */ +#define CFG_MEMTEST_END (CFG_SDRAM_BASE + 0x7e00000) /* 126MB in DRAM */ + +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* default load address */ + +#define CFG_HZ 1000 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE 0x40000 /* regular stack 256KB */ + +/********************************** + Support Clock Settings + ********************************** + Setting SYNC ASYNC + ---------------------------------- + 667_133_66 X O + 533_133_66 O O + 400_133_66 X O + 400_100_50 O O + **********************************/ + +/*#define CONFIG_CLK_667_133_66*/ +#define CONFIG_CLK_533_133_66 +/* +#define CONFIG_CLK_400_100_50 +#define CONFIG_CLK_400_133_66 +#define CONFIG_SYNC_MODE +*/ + +/* SMDK6400 has 2 banks of DRAM, but we use only one in U-Boot */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CFG_SDRAM_BASE /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB in Bank #1 */ + +#define CFG_FLASH_BASE 0x10000000 +#define CFG_MONITOR_BASE 0x00000000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +/* AM29LV160B has 35 sectors, AM29LV800B - 19 */ +#define CFG_MAX_FLASH_SECT 40 + +#define CONFIG_AMD_LV800 +#define CFG_FLASH_CFI 1 /* Use CFI parameters (needed?) */ +/* Use drivers/cfi_flash.c, even though the flash is not CFI-compliant */ +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_FLASH_CFI_LEGACY +#define CFG_FLASH_LEGACY_512Kx16 + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (5 * CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (5 * CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* + * SMDK6400 board specific data + */ + +#define CONFIG_IDENT_STRING " for SMDK6400" + +/* base address for uboot */ +#define CFG_PHY_UBOOT_BASE (CFG_SDRAM_BASE + 0x07e00000) +/* total memory available to uboot */ +#define CFG_UBOOT_SIZE (1024 * 1024) + +#ifdef CONFIG_ENABLE_MMU +#define CFG_MAPPED_RAM_BASE 0xc0000000 +#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \ + "bootm 0xc0018000" +#else +#define CFG_MAPPED_RAM_BASE CFG_SDRAM_BASE +#define CONFIG_BOOTCOMMAND "nand read 0x50018000 0x60000 0x1c0000;" \ + "bootm 0x50018000" +#endif + +/* NAND U-Boot load and start address */ +#define CFG_UBOOT_BASE (CFG_MAPPED_RAM_BASE + 0x07e00000) + +#define CFG_ENV_OFFSET 0x0040000 + +/* NAND configuration */ +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x70200010 +#define NAND_MAX_CHIPS 1 +#define CFG_S3C_NAND_HWECC + +#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ +#define CFG_NAND_WP 1 +#define CFG_NAND_YAFFS_WRITE 1 /* support yaffs write */ +#define CFG_NAND_BBT_2NDPAGE 1 /* bad-block markers in 1st and 2nd pages */ + +#define CFG_NAND_U_BOOT_DST CFG_PHY_UBOOT_BASE /* NUB load-addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* NUB start-addr */ + +#define CFG_NAND_U_BOOT_OFFS (4 * 1024) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (252 * 1024) /* Size of RAM U-Boot image */ + +/* NAND chip page size */ +#define CFG_NAND_PAGE_SIZE 2048 +/* NAND chip block size */ +#define CFG_NAND_BLOCK_SIZE (128 * 1024) +/* NAND chip page per block count */ +#define CFG_NAND_PAGE_COUNT 64 +/* Location of the bad-block label */ +#define CFG_NAND_BAD_BLOCK_POS 0 +/* Extra address cycle for > 128MiB */ +#define CFG_NAND_5_ADDR_CYCLE + +/* Size of the block protected by one OOB (Spare Area in Samsung terminology) */ +#define CFG_NAND_ECCSIZE CFG_NAND_PAGE_SIZE +/* Number of ECC bytes per OOB - S3C6400 calculates 4 bytes ECC in 1-bit mode */ +#define CFG_NAND_ECCBYTES 4 +/* Number of ECC-blocks per NAND page */ +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +/* Size of a single OOB region */ +#define CFG_NAND_OOBSIZE 64 +/* Number of ECC bytes per page */ +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +/* ECC byte positions */ +#define CFG_NAND_ECCPOS {40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63} + +/* Boot configuration (define only one of next 3) */ +#define CONFIG_BOOT_NAND +/* None of these are currently implemented. Left from the original Samsung + * version for reference +#define CONFIG_BOOT_NOR +#define CONFIG_BOOT_MOVINAND +#define CONFIG_BOOT_ONENAND +*/ + +#define CONFIG_NAND +#define CONFIG_NAND_S3C64XX +/* Unimplemented or unsupported. See comment above. +#define CONFIG_ONENAND +#define CONFIG_MOVINAND +*/ + +/* Settings as above boot configuration */ +#define CFG_ENV_IS_IN_NAND +#define CONFIG_BOOTARGS "console=ttySAC,115200" + +#if !defined(CONFIG_ENABLE_MMU) +#define CONFIG_CMD_USB 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CFG_USB_OHCI_REGS_BASE 0x74300000 +#define CFG_USB_OHCI_SLOT_NAME "s3c6400" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 3 +#define CFG_USB_OHCI_CPU_INIT 1 +#define LITTLEENDIAN 1 /* used by usb_ohci.c */ + +#define CONFIG_USB_STORAGE 1 +#endif +#define CONFIG_DOS_PARTITION 1 + +#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_ENABLE_MMU) +# error "usb_ohci.c is currently broken with MMU enabled." +#endif + +#endif /* __CONFIG_H */ diff --git a/include/mpc512x.h b/include/mpc512x.h index a76b1ca214..cb418d1e91 100644 --- a/include/mpc512x.h +++ b/include/mpc512x.h @@ -58,6 +58,7 @@ #define CS5_CONFIG 0x00014 #define CS6_CONFIG 0x00018 #define CS7_CONFIG 0x0001C +#define CS_ALE_TIMING_CONFIG 0x00034 #define CS_CTRL 0x00020 #define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ diff --git a/cpu/mpc5xxx/sdma.h b/include/mpc5xxx_sdma.h index 8b740e4e6e..8b740e4e6e 100644 --- a/cpu/mpc5xxx/sdma.h +++ b/include/mpc5xxx_sdma.h diff --git a/include/s3c6400.h b/include/s3c6400.h new file mode 100644 index 0000000000..fd3e99bcfa --- /dev/null +++ b/include/s3c6400.h @@ -0,0 +1,894 @@ +/* + * (C) Copyright 2007 + * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com. + * - only support for S3C6400 + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c6400.h + * + * Based on S3C6400 User's manual Rev 0.0 + ************************************************/ + +#ifndef __S3C6400_H__ +#define __S3C6400_H__ + +#ifndef CONFIG_S3C6400 +#define CONFIG_S3C6400 1 +#endif + +#define S3C64XX_UART_CHANNELS 3 +#define S3C64XX_SPI_CHANNELS 2 + +#include <asm/hardware.h> + +#define ELFIN_CLOCK_POWER_BASE 0x7e00f000 + +/* Clock & Power Controller for mDirac3*/ +#define APLL_LOCK_OFFSET 0x00 +#define MPLL_LOCK_OFFSET 0x04 +#define EPLL_LOCK_OFFSET 0x08 +#define APLL_CON_OFFSET 0x0C +#define MPLL_CON_OFFSET 0x10 +#define EPLL_CON0_OFFSET 0x14 +#define EPLL_CON1_OFFSET 0x18 +#define CLK_SRC_OFFSET 0x1C +#define CLK_DIV0_OFFSET 0x20 +#define CLK_DIV1_OFFSET 0x24 +#define CLK_DIV2_OFFSET 0x28 +#define CLK_OUT_OFFSET 0x2C +#define HCLK_GATE_OFFSET 0x30 +#define PCLK_GATE_OFFSET 0x34 +#define SCLK_GATE_OFFSET 0x38 +#define AHB_CON0_OFFSET 0x100 +#define AHB_CON1_OFFSET 0x104 +#define AHB_CON2_OFFSET 0x108 +#define SELECT_DMA_OFFSET 0x110 +#define SW_RST_OFFSET 0x114 +#define SYS_ID_OFFSET 0x118 +#define MEM_SYS_CFG_OFFSET 0x120 +#define QOS_OVERRIDE0_OFFSET 0x124 +#define QOS_OVERRIDE1_OFFSET 0x128 +#define MEM_CFG_STAT_OFFSET 0x12C +#define PWR_CFG_OFFSET 0x804 +#define EINT_MASK_OFFSET 0x808 +#define NOR_CFG_OFFSET 0x810 +#define STOP_CFG_OFFSET 0x814 +#define SLEEP_CFG_OFFSET 0x818 +#define OSC_FREQ_OFFSET 0x820 +#define OSC_STABLE_OFFSET 0x824 +#define PWR_STABLE_OFFSET 0x828 +#define FPC_STABLE_OFFSET 0x82C +#define MTC_STABLE_OFFSET 0x830 +#define OTHERS_OFFSET 0x900 +#define RST_STAT_OFFSET 0x904 +#define WAKEUP_STAT_OFFSET 0x908 +#define BLK_PWR_STAT_OFFSET 0x90C +#define INF_REG0_OFFSET 0xA00 +#define INF_REG1_OFFSET 0xA04 +#define INF_REG2_OFFSET 0xA08 +#define INF_REG3_OFFSET 0xA0C +#define INF_REG4_OFFSET 0xA10 +#define INF_REG5_OFFSET 0xA14 +#define INF_REG6_OFFSET 0xA18 +#define INF_REG7_OFFSET 0xA1C + +#define OSC_CNT_VAL_OFFSET 0x824 +#define PWR_CNT_VAL_OFFSET 0x828 +#define FPC_CNT_VAL_OFFSET 0x82C +#define MTC_CNT_VAL_OFFSET 0x830 + +#define APLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) +#define MPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) +#define EPLL_LOCK_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) +#define APLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) +#define MPLL_CON_REG __REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) +#define EPLL_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) +#define EPLL_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) +#define CLK_SRC_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) +#define CLK_DIV0_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) +#define CLK_DIV1_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) +#define CLK_DIV2_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) +#define CLK_OUT_REG __REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) +#define HCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) +#define PCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) +#define SCLK_GATE_REG __REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) +#define AHB_CON0_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) +#define AHB_CON1_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) +#define AHB_CON2_REG __REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) +#define SELECT_DMA_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + SELECT_DMA_OFFSET) +#define SW_RST_REG __REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) +#define SYS_ID_REG __REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) +#define MEM_SYS_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MEM_SYS_CFG_OFFSET) +#define QOS_OVERRIDE0_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + QOS_OVERRIDE0_OFFSET) +#define QOS_OVERRIDE1_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + QOS_OVERRIDE1_OFFSET) +#define MEM_CFG_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MEM_CFG_STAT_OFFSET) +#define PWR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) +#define EINT_MASK_REG __REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) +#define NOR_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) +#define STOP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) +#define SLEEP_CFG_REG __REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) +#define OSC_FREQ_REG __REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) +#define OSC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + OSC_CNT_VAL_OFFSET) +#define PWR_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + PWR_CNT_VAL_OFFSET) +#define FPC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + FPC_CNT_VAL_OFFSET) +#define MTC_CNT_VAL_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + MTC_CNT_VAL_OFFSET) +#define OTHERS_REG __REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) +#define RST_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) +#define WAKEUP_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + WAKEUP_STAT_OFFSET) +#define BLK_PWR_STAT_REG __REG(ELFIN_CLOCK_POWER_BASE + \ + BLK_PWR_STAT_OFFSET) +#define INF_REG0_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) +#define INF_REG1_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) +#define INF_REG2_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) +#define INF_REG3_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) +#define INF_REG4_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) +#define INF_REG5_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) +#define INF_REG6_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) +#define INF_REG7_REG __REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) + +#define APLL_LOCK (ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET) +#define MPLL_LOCK (ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET) +#define EPLL_LOCK (ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET) +#define APLL_CON (ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET) +#define MPLL_CON (ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET) +#define EPLL_CON0 (ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET) +#define EPLL_CON1 (ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET) +#define CLK_SRC (ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET) +#define CLK_DIV0 (ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET) +#define CLK_DIV1 (ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET) +#define CLK_DIV2 (ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET) +#define CLK_OUT (ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET) +#define HCLK_GATE (ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET) +#define PCLK_GATE (ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET) +#define SCLK_GATE (ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET) +#define AHB_CON0 (ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET) +#define AHB_CON1 (ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET) +#define AHB_CON2 (ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET) +#define SELECT_DMA (ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET) +#define SW_RST (ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET) +#define SYS_ID (ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET) +#define MEM_SYS_CFG (ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET) +#define QOS_OVERRIDE0 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET) +#define QOS_OVERRIDE1 (ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET) +#define MEM_CFG_STAT (ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET) +#define PWR_CFG (ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET) +#define EINT_MASK (ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET) +#define NOR_CFG (ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET) +#define STOP_CFG (ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET) +#define SLEEP_CFG (ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET) +#define OSC_FREQ (ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET) +#define OSC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET) +#define PWR_CNT_VAL (ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET) +#define FPC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET) +#define MTC_CNT_VAL (ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET) +#define OTHERS (ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET) +#define RST_STAT (ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET) +#define WAKEUP_STAT (ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET) +#define BLK_PWR_STAT (ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET) +#define INF_REG0 (ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET) +#define INF_REG1 (ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET) +#define INF_REG2 (ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET) +#define INF_REG3 (ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET) +#define INF_REG4 (ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET) +#define INF_REG5 (ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET) +#define INF_REG6 (ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET) +#define INF_REG7 (ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET) + + +/* + * GPIO + */ +#define ELFIN_GPIO_BASE 0x7f008000 + +#define GPACON_OFFSET 0x00 +#define GPADAT_OFFSET 0x04 +#define GPAPUD_OFFSET 0x08 +#define GPACONSLP_OFFSET 0x0C +#define GPAPUDSLP_OFFSET 0x10 +#define GPBCON_OFFSET 0x20 +#define GPBDAT_OFFSET 0x04 +#define GPBPUD_OFFSET 0x08 +#define GPBCONSLP_OFFSET 0x0C +#define GPBPUDSLP_OFFSET 0x30 +#define GPCCON_OFFSET 0x40 +#define GPCDAT_OFFSET 0x44 +#define GPCPUD_OFFSET 0x48 +#define GPCCONSLP_OFFSET 0x4C +#define GPCPUDSLP_OFFSET 0x50 +#define GPDCON_OFFSET 0x60 +#define GPDDAT_OFFSET 0x64 +#define GPDPUD_OFFSET 0x68 +#define GPDCONSLP_OFFSET 0x6C +#define GPDPUDSLP_OFFSET 0x70 +#define GPECON_OFFSET 0x80 +#define GPEDAT_OFFSET 0x84 +#define GPEPUD_OFFSET 0x88 +#define GPECONSLP_OFFSET 0x8C +#define GPEPUDSLP_OFFSET 0x90 +#define GPFCON_OFFSET 0xA0 +#define GPFDAT_OFFSET 0xA4 +#define GPFPUD_OFFSET 0xA8 +#define GPFCONSLP_OFFSET 0xAC +#define GPFPUDSLP_OFFSET 0xB0 +#define GPGCON_OFFSET 0xC0 +#define GPGDAT_OFFSET 0xC4 +#define GPGPUD_OFFSET 0xC8 +#define GPGCONSLP_OFFSET 0xCC +#define GPGPUDSLP_OFFSET 0xD0 +#define GPHCON0_OFFSET 0xE0 +#define GPHCON1_OFFSET 0xE4 +#define GPHDAT_OFFSET 0xE8 +#define GPHPUD_OFFSET 0xEC +#define GPHCONSLP_OFFSET 0xF0 +#define GPHPUDSLP_OFFSET 0xF4 +#define GPICON_OFFSET 0x100 +#define GPIDAT_OFFSET 0x104 +#define GPIPUD_OFFSET 0x108 +#define GPICONSLP_OFFSET 0x10C +#define GPIPUDSLP_OFFSET 0x110 +#define GPJCON_OFFSET 0x120 +#define GPJDAT_OFFSET 0x124 +#define GPJPUD_OFFSET 0x128 +#define GPJCONSLP_OFFSET 0x12C +#define GPJPUDSLP_OFFSET 0x130 +#define MEM0DRVCON_OFFSET 0x1D0 +#define MEM1DRVCON_OFFSET 0x1D4 +#define GPKCON0_OFFSET 0x800 +#define GPKCON1_OFFSET 0x804 +#define GPKDAT_OFFSET 0x808 +#define GPKPUD_OFFSET 0x80C +#define GPLCON0_OFFSET 0x810 +#define GPLCON1_OFFSET 0x814 +#define GPLDAT_OFFSET 0x818 +#define GPLPUD_OFFSET 0x81C +#define GPMCON_OFFSET 0x820 +#define GPMDAT_OFFSET 0x824 +#define GPMPUD_OFFSET 0x828 +#define GPNCON_OFFSET 0x830 +#define GPNDAT_OFFSET 0x834 +#define GPNPUD_OFFSET 0x838 +#define GPOCON_OFFSET 0x140 +#define GPODAT_OFFSET 0x144 +#define GPOPUD_OFFSET 0x148 +#define GPOCONSLP_OFFSET 0x14C +#define GPOPUDSLP_OFFSET 0x150 +#define GPPCON_OFFSET 0x160 +#define GPPDAT_OFFSET 0x164 +#define GPPPUD_OFFSET 0x168 +#define GPPCONSLP_OFFSET 0x16C +#define GPPPUDSLP_OFFSET 0x170 +#define GPQCON_OFFSET 0x180 +#define GPQDAT_OFFSET 0x184 +#define GPQPUD_OFFSET 0x188 +#define GPQCONSLP_OFFSET 0x18C +#define GPQPUDSLP_OFFSET 0x190 + +#define EINTPEND_OFFSET 0x924 + +#define GPACON_REG __REG(ELFIN_GPIO_BASE + GPACON_OFFSET) +#define GPADAT_REG __REG(ELFIN_GPIO_BASE + GPADAT_OFFSET) +#define GPAPUD_REG __REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET) +#define GPACONSLP_REG __REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET) +#define GPAPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) +#define GPBCON_REG __REG(ELFIN_GPIO_BASE + GPBCON_OFFSET) +#define GPBDAT_REG __REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET) +#define GPBPUD_REG __REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET) +#define GPBCONSLP_REG __REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) +#define GPBPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) +#define GPCCON_REG __REG(ELFIN_GPIO_BASE + GPCCON_OFFSET) +#define GPCDAT_REG __REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET) +#define GPCPUD_REG __REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET) +#define GPCCONSLP_REG __REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) +#define GPCPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) +#define GPDCON_REG __REG(ELFIN_GPIO_BASE + GPDCON_OFFSET) +#define GPDDAT_REG __REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET) +#define GPDPUD_REG __REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET) +#define GPDCONSLP_REG __REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) +#define GPDPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) +#define GPECON_REG __REG(ELFIN_GPIO_BASE + GPECON_OFFSET) +#define GPEDAT_REG __REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET) +#define GPEPUD_REG __REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET) +#define GPECONSLP_REG __REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET) +#define GPEPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) +#define GPFCON_REG __REG(ELFIN_GPIO_BASE + GPFCON_OFFSET) +#define GPFDAT_REG __REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET) +#define GPFPUD_REG __REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET) +#define GPFCONSLP_REG __REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) +#define GPFPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) +#define GPGCON_REG __REG(ELFIN_GPIO_BASE + GPGCON_OFFSET) +#define GPGDAT_REG __REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET) +#define GPGPUD_REG __REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET) +#define GPGCONSLP_REG __REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) +#define GPGPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) +#define GPHCON0_REG __REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET) +#define GPHCON1_REG __REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET) +#define GPHDAT_REG __REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET) +#define GPHPUD_REG __REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET) +#define GPHCONSLP_REG __REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) +#define GPHPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) +#define GPICON_REG __REG(ELFIN_GPIO_BASE + GPICON_OFFSET) +#define GPIDAT_REG __REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET) +#define GPIPUD_REG __REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET) +#define GPICONSLP_REG __REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET) +#define GPIPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) +#define GPJCON_REG __REG(ELFIN_GPIO_BASE + GPJCON_OFFSET) +#define GPJDAT_REG __REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET) +#define GPJPUD_REG __REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET) +#define GPJCONSLP_REG __REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) +#define GPJPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) +#define GPKCON0_REG __REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET) +#define GPKCON1_REG __REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET) +#define GPKDAT_REG __REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET) +#define GPKPUD_REG __REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET) +#define GPLCON0_REG __REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET) +#define GPLCON1_REG __REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET) +#define GPLDAT_REG __REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET) +#define GPLPUD_REG __REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET) +#define GPMCON_REG __REG(ELFIN_GPIO_BASE + GPMCON_OFFSET) +#define GPMDAT_REG __REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET) +#define GPMPUD_REG __REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET) +#define GPNCON_REG __REG(ELFIN_GPIO_BASE + GPNCON_OFFSET) +#define GPNDAT_REG __REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET) +#define GPNPUD_REG __REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET) +#define GPOCON_REG __REG(ELFIN_GPIO_BASE + GPOCON_OFFSET) +#define GPODAT_REG __REG(ELFIN_GPIO_BASE + GPODAT_OFFSET) +#define GPOPUD_REG __REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET) +#define GPOCONSLP_REG __REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) +#define GPOPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) +#define GPPCON_REG __REG(ELFIN_GPIO_BASE + GPPCON_OFFSET) +#define GPPDAT_REG __REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET) +#define GPPPUD_REG __REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET) +#define GPPCONSLP_REG __REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) +#define GPPPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) +#define GPQCON_REG __REG(ELFIN_GPIO_BASE + GPQCON_OFFSET) +#define GPQDAT_REG __REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET) +#define GPQPUD_REG __REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET) +#define GPQCONSLP_REG __REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) +#define GPQPUDSLP_REG __REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) + +/* + * Bus Matrix + */ +#define ELFIN_MEM_SYS_CFG 0x7e00f120 + +#define GPACON (ELFIN_GPIO_BASE + GPACON_OFFSET) +#define GPADAT (ELFIN_GPIO_BASE + GPADAT_OFFSET) +#define GPAPUD (ELFIN_GPIO_BASE + GPAPUD_OFFSET) +#define GPACONSLP (ELFIN_GPIO_BASE + GPACONSLP_OFFSET) +#define GPAPUDSLP (ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET) +#define GPBCON (ELFIN_GPIO_BASE + GPBCON_OFFSET) +#define GPBDAT (ELFIN_GPIO_BASE + GPBDAT_OFFSET) +#define GPBPUD (ELFIN_GPIO_BASE + GPBPUD_OFFSET) +#define GPBCONSLP (ELFIN_GPIO_BASE + GPBCONSLP_OFFSET) +#define GPBPUDSLP (ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET) +#define GPCCON (ELFIN_GPIO_BASE + GPCCON_OFFSET) +#define GPCDAT (ELFIN_GPIO_BASE + GPCDAT_OFFSET) +#define GPCPUD (ELFIN_GPIO_BASE + GPCPUD_OFFSET) +#define GPCCONSLP (ELFIN_GPIO_BASE + GPCCONSLP_OFFSET) +#define GPCPUDSLP (ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET) +#define GPDCON (ELFIN_GPIO_BASE + GPDCON_OFFSET) +#define GPDDAT (ELFIN_GPIO_BASE + GPDDAT_OFFSET) +#define GPDPUD (ELFIN_GPIO_BASE + GPDPUD_OFFSET) +#define GPDCONSLP (ELFIN_GPIO_BASE + GPDCONSLP_OFFSET) +#define GPDPUDSLP (ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET) +#define GPECON (ELFIN_GPIO_BASE + GPECON_OFFSET) +#define GPEDAT (ELFIN_GPIO_BASE + GPEDAT_OFFSET) +#define GPEPUD (ELFIN_GPIO_BASE + GPEPUD_OFFSET) +#define GPECONSLP (ELFIN_GPIO_BASE + GPECONSLP_OFFSET) +#define GPEPUDSLP (ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET) +#define GPFCON (ELFIN_GPIO_BASE + GPFCON_OFFSET) +#define GPFDAT (ELFIN_GPIO_BASE + GPFDAT_OFFSET) +#define GPFPUD (ELFIN_GPIO_BASE + GPFPUD_OFFSET) +#define GPFCONSLP (ELFIN_GPIO_BASE + GPFCONSLP_OFFSET) +#define GPFPUDSLP (ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET) +#define GPGCON (ELFIN_GPIO_BASE + GPGCON_OFFSET) +#define GPGDAT (ELFIN_GPIO_BASE + GPGDAT_OFFSET) +#define GPGPUD (ELFIN_GPIO_BASE + GPGPUD_OFFSET) +#define GPGCONSLP (ELFIN_GPIO_BASE + GPGCONSLP_OFFSET) +#define GPGPUDSLP (ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET) +#define GPHCON0 (ELFIN_GPIO_BASE + GPHCON0_OFFSET) +#define GPHCON1 (ELFIN_GPIO_BASE + GPHCON1_OFFSET) +#define GPHDAT (ELFIN_GPIO_BASE + GPHDAT_OFFSET) +#define GPHPUD (ELFIN_GPIO_BASE + GPHPUD_OFFSET) +#define GPHCONSLP (ELFIN_GPIO_BASE + GPHCONSLP_OFFSET) +#define GPHPUDSLP (ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET) +#define GPICON (ELFIN_GPIO_BASE + GPICON_OFFSET) +#define GPIDAT (ELFIN_GPIO_BASE + GPIDAT_OFFSET) +#define GPIPUD (ELFIN_GPIO_BASE + GPIPUD_OFFSET) +#define GPICONSLP (ELFIN_GPIO_BASE + GPICONSLP_OFFSET) +#define GPIPUDSLP (ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET) +#define GPJCON (ELFIN_GPIO_BASE + GPJCON_OFFSET) +#define GPJDAT (ELFIN_GPIO_BASE + GPJDAT_OFFSET) +#define GPJPUD (ELFIN_GPIO_BASE + GPJPUD_OFFSET) +#define GPJCONSLP (ELFIN_GPIO_BASE + GPJCONSLP_OFFSET) +#define GPJPUDSLP (ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET) +#define GPKCON0 (ELFIN_GPIO_BASE + GPKCON0_OFFSET) +#define GPKCON1 (ELFIN_GPIO_BASE + GPKCON1_OFFSET) +#define GPKDAT (ELFIN_GPIO_BASE + GPKDAT_OFFSET) +#define GPKPUD (ELFIN_GPIO_BASE + GPKPUD_OFFSET) +#define GPLCON0 (ELFIN_GPIO_BASE + GPLCON0_OFFSET) +#define GPLCON1 (ELFIN_GPIO_BASE + GPLCON1_OFFSET) +#define GPLDAT (ELFIN_GPIO_BASE + GPLDAT_OFFSET) +#define GPLPUD (ELFIN_GPIO_BASE + GPLPUD_OFFSET) +#define GPMCON (ELFIN_GPIO_BASE + GPMCON_OFFSET) +#define GPMDAT (ELFIN_GPIO_BASE + GPMDAT_OFFSET) +#define GPMPUD (ELFIN_GPIO_BASE + GPMPUD_OFFSET) +#define GPNCON (ELFIN_GPIO_BASE + GPNCON_OFFSET) +#define GPNDAT (ELFIN_GPIO_BASE + GPNDAT_OFFSET) +#define GPNPUD (ELFIN_GPIO_BASE + GPNPUD_OFFSET) +#define GPOCON (ELFIN_GPIO_BASE + GPOCON_OFFSET) +#define GPODAT (ELFIN_GPIO_BASE + GPODAT_OFFSET) +#define GPOPUD (ELFIN_GPIO_BASE + GPOPUD_OFFSET) +#define GPOCONSLP (ELFIN_GPIO_BASE + GPOCONSLP_OFFSET) +#define GPOPUDSLP (ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET) +#define GPPCON (ELFIN_GPIO_BASE + GPPCON_OFFSET) +#define GPPDAT (ELFIN_GPIO_BASE + GPPDAT_OFFSET) +#define GPPPUD (ELFIN_GPIO_BASE + GPPPUD_OFFSET) +#define GPPCONSLP (ELFIN_GPIO_BASE + GPPCONSLP_OFFSET) +#define GPPPUDSLP (ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET) +#define GPQCON (ELFIN_GPIO_BASE + GPQCON_OFFSET) +#define GPQDAT (ELFIN_GPIO_BASE + GPQDAT_OFFSET) +#define GPQPUD (ELFIN_GPIO_BASE + GPQPUD_OFFSET) +#define GPQCONSLP (ELFIN_GPIO_BASE + GPQCONSLP_OFFSET) +#define GPQPUDSLP (ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET) + +/* + * Memory controller + */ +#define ELFIN_SROM_BASE 0x70000000 + +#define SROM_BW_REG __REG(ELFIN_SROM_BASE + 0x0) +#define SROM_BC0_REG __REG(ELFIN_SROM_BASE + 0x4) +#define SROM_BC1_REG __REG(ELFIN_SROM_BASE + 0x8) +#define SROM_BC2_REG __REG(ELFIN_SROM_BASE + 0xC) +#define SROM_BC3_REG __REG(ELFIN_SROM_BASE + 0x10) +#define SROM_BC4_REG __REG(ELFIN_SROM_BASE + 0x14) +#define SROM_BC5_REG __REG(ELFIN_SROM_BASE + 0x18) + +/* + * SDRAM Controller + */ +#define ELFIN_DMC0_BASE 0x7e000000 +#define ELFIN_DMC1_BASE 0x7e001000 + +#define INDEX_DMC_MEMC_STATUS 0x00 +#define INDEX_DMC_MEMC_CMD 0x04 +#define INDEX_DMC_DIRECT_CMD 0x08 +#define INDEX_DMC_MEMORY_CFG 0x0C +#define INDEX_DMC_REFRESH_PRD 0x10 +#define INDEX_DMC_CAS_LATENCY 0x14 +#define INDEX_DMC_T_DQSS 0x18 +#define INDEX_DMC_T_MRD 0x1C +#define INDEX_DMC_T_RAS 0x20 +#define INDEX_DMC_T_RC 0x24 +#define INDEX_DMC_T_RCD 0x28 +#define INDEX_DMC_T_RFC 0x2C +#define INDEX_DMC_T_RP 0x30 +#define INDEX_DMC_T_RRD 0x34 +#define INDEX_DMC_T_WR 0x38 +#define INDEX_DMC_T_WTR 0x3C +#define INDEX_DMC_T_XP 0x40 +#define INDEX_DMC_T_XSR 0x44 +#define INDEX_DMC_T_ESR 0x48 +#define INDEX_DMC_MEMORY_CFG2 0x4C +#define INDEX_DMC_CHIP_0_CFG 0x200 +#define INDEX_DMC_CHIP_1_CFG 0x204 +#define INDEX_DMC_CHIP_2_CFG 0x208 +#define INDEX_DMC_CHIP_3_CFG 0x20C +#define INDEX_DMC_USER_STATUS 0x300 +#define INDEX_DMC_USER_CONFIG 0x304 + +/* + * Memory Chip direct command + */ +#define DMC_NOP0 0x0c0000 +#define DMC_NOP1 0x1c0000 +#define DMC_PA0 0x000000 /* Precharge all */ +#define DMC_PA1 0x100000 +#define DMC_AR0 0x040000 /* Autorefresh */ +#define DMC_AR1 0x140000 +#define DMC_SDR_MR0 0x080032 /* MRS, CAS 3, Burst Length 4 */ +#define DMC_SDR_MR1 0x180032 +#define DMC_DDR_MR0 0x080162 +#define DMC_DDR_MR1 0x180162 +#define DMC_mDDR_MR0 0x080032 /* CAS 3, Burst Length 4 */ +#define DMC_mDDR_MR1 0x180032 +#define DMC_mSDR_EMR0 0x0a0000 /* EMRS, DS:Full, PASR:Full Array */ +#define DMC_mSDR_EMR1 0x1a0000 +#define DMC_DDR_EMR0 0x090000 +#define DMC_DDR_EMR1 0x190000 +#define DMC_mDDR_EMR0 0x0a0000 /* DS:Full, PASR:Full Array */ +#define DMC_mDDR_EMR1 0x1a0000 + +/* + * Definitions for memory configuration + * Set memory configuration + * active_chips = 1'b0 (1 chip) + * qos_master_chip = 3'b000(ARID[3:0]) + * memory burst = 3'b010(burst 4) + * stop_mem_clock = 1'b0(disable dynamical stop) + * auto_power_down = 1'b0(disable auto power-down mode) + * power_down_prd = 6'b00_0000(0 cycle for auto power-down) + * ap_bit = 1'b0 (bit position of auto-precharge is 10) + * row_bits = 3'b010(# row address 13) + * column_bits = 3'b010(# column address 10 ) + * + * Set user configuration + * 2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR + * + * Set chip select for chip [n] + * row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff + * CHIP_[n]_CFG=0x30F8, 30: ADDR[31:24], F8: Mask[31:24] + */ + +/* + * Nand flash controller + */ +#define ELFIN_NAND_BASE 0x70200000 + +#define NFCONF_OFFSET 0x00 +#define NFCONT_OFFSET 0x04 +#define NFCMMD_OFFSET 0x08 +#define NFADDR_OFFSET 0x0c +#define NFDATA_OFFSET 0x10 +#define NFMECCDATA0_OFFSET 0x14 +#define NFMECCDATA1_OFFSET 0x18 +#define NFSECCDATA0_OFFSET 0x1c +#define NFSBLK_OFFSET 0x20 +#define NFEBLK_OFFSET 0x24 +#define NFSTAT_OFFSET 0x28 +#define NFESTAT0_OFFSET 0x2c +#define NFESTAT1_OFFSET 0x30 +#define NFMECC0_OFFSET 0x34 +#define NFMECC1_OFFSET 0x38 +#define NFSECC_OFFSET 0x3c +#define NFMLCBITPT_OFFSET 0x40 + +#define NFCONF (ELFIN_NAND_BASE + NFCONF_OFFSET) +#define NFCONT (ELFIN_NAND_BASE + NFCONT_OFFSET) +#define NFCMMD (ELFIN_NAND_BASE + NFCMMD_OFFSET) +#define NFADDR (ELFIN_NAND_BASE + NFADDR_OFFSET) +#define NFDATA (ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFMECCDATA0 (ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) +#define NFMECCDATA1 (ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) +#define NFSECCDATA0 (ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) +#define NFSBLK (ELFIN_NAND_BASE + NFSBLK_OFFSET) +#define NFEBLK (ELFIN_NAND_BASE + NFEBLK_OFFSET) +#define NFSTAT (ELFIN_NAND_BASE + NFSTAT_OFFSET) +#define NFESTAT0 (ELFIN_NAND_BASE + NFESTAT0_OFFSET) +#define NFESTAT1 (ELFIN_NAND_BASE + NFESTAT1_OFFSET) +#define NFMECC0 (ELFIN_NAND_BASE + NFMECC0_OFFSET) +#define NFMECC1 (ELFIN_NAND_BASE + NFMECC1_OFFSET) +#define NFSECC (ELFIN_NAND_BASE + NFSECC_OFFSET) +#define NFMLCBITPT (ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) + +#define NFCONF_REG __REG(ELFIN_NAND_BASE + NFCONF_OFFSET) +#define NFCONT_REG __REG(ELFIN_NAND_BASE + NFCONT_OFFSET) +#define NFCMD_REG __REG(ELFIN_NAND_BASE + NFCMMD_OFFSET) +#define NFADDR_REG __REG(ELFIN_NAND_BASE + NFADDR_OFFSET) +#define NFDATA_REG __REG(ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFDATA8_REG __REGb(ELFIN_NAND_BASE + NFDATA_OFFSET) +#define NFMECCDATA0_REG __REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET) +#define NFMECCDATA1_REG __REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET) +#define NFSECCDATA0_REG __REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET) +#define NFSBLK_REG __REG(ELFIN_NAND_BASE + NFSBLK_OFFSET) +#define NFEBLK_REG __REG(ELFIN_NAND_BASE + NFEBLK_OFFSET) +#define NFSTAT_REG __REG(ELFIN_NAND_BASE + NFSTAT_OFFSET) +#define NFESTAT0_REG __REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET) +#define NFESTAT1_REG __REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET) +#define NFMECC0_REG __REG(ELFIN_NAND_BASE + NFMECC0_OFFSET) +#define NFMECC1_REG __REG(ELFIN_NAND_BASE + NFMECC1_OFFSET) +#define NFSECC_REG __REG(ELFIN_NAND_BASE + NFSECC_OFFSET) +#define NFMLCBITPT_REG __REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET) + +#define NFCONF_ECC_4BIT (1<<24) + +#define NFCONT_ECC_ENC (1<<18) +#define NFCONT_WP (1<<16) +#define NFCONT_MECCLOCK (1<<7) +#define NFCONT_SECCLOCK (1<<6) +#define NFCONT_INITMECC (1<<5) +#define NFCONT_INITSECC (1<<4) +#define NFCONT_INITECC (NFCONT_INITMECC | NFCONT_INITSECC) +#define NFCONT_CS_ALT (1<<2) +#define NFCONT_CS (1<<1) +#define NFCONT_ENABLE (1<<0) + +#define NFSTAT_ECCENCDONE (1<<7) +#define NFSTAT_ECCDECDONE (1<<6) +#define NFSTAT_RnB (1<<0) + +#define NFESTAT0_ECCBUSY (1<<31) + +/* + * Interrupt + */ +#define ELFIN_VIC0_BASE_ADDR 0x71200000 +#define ELFIN_VIC1_BASE_ADDR 0x71300000 +#define oINTMOD 0x0C /* VIC INT SELECT (IRQ or FIQ) */ +#define oINTUNMSK 0x10 /* VIC INT EN (write 1 to unmask) */ +#define oINTMSK 0x14 /* VIC INT EN CLEAR (write 1 to mask) */ +#define oINTSUBMSK 0x1C /* VIC SOFT INT CLEAR */ +#define oVECTADDR 0xF00 /* VIC ADDRESS */ + +/* + * Watchdog timer + */ +#define ELFIN_WATCHDOG_BASE 0x7E004000 + +#define WTCON_REG __REG(0x7E004004) +#define WTDAT_REG __REG(0x7E004008) +#define WTCNT_REG __REG(0x7E00400C) + + +/* + * UART + */ +#define ELFIN_UART_BASE 0x7F005000 + +#define ELFIN_UART0_OFFSET 0x0000 +#define ELFIN_UART1_OFFSET 0x0400 +#define ELFIN_UART2_OFFSET 0x0800 + +#define ULCON_OFFSET 0x00 +#define UCON_OFFSET 0x04 +#define UFCON_OFFSET 0x08 +#define UMCON_OFFSET 0x0C +#define UTRSTAT_OFFSET 0x10 +#define UERSTAT_OFFSET 0x14 +#define UFSTAT_OFFSET 0x18 +#define UMSTAT_OFFSET 0x1C +#define UTXH_OFFSET 0x20 +#define URXH_OFFSET 0x24 +#define UBRDIV_OFFSET 0x28 +#define UDIVSLOT_OFFSET 0x2C +#define UINTP_OFFSET 0x30 +#define UINTSP_OFFSET 0x34 +#define UINTM_OFFSET 0x38 + +#define ULCON0_REG __REG(0x7F005000) +#define UCON0_REG __REG(0x7F005004) +#define UFCON0_REG __REG(0x7F005008) +#define UMCON0_REG __REG(0x7F00500C) +#define UTRSTAT0_REG __REG(0x7F005010) +#define UERSTAT0_REG __REG(0x7F005014) +#define UFSTAT0_REG __REG(0x7F005018) +#define UMSTAT0_REG __REG(0x7F00501c) +#define UTXH0_REG __REG(0x7F005020) +#define URXH0_REG __REG(0x7F005024) +#define UBRDIV0_REG __REG(0x7F005028) +#define UDIVSLOT0_REG __REG(0x7F00502c) +#define UINTP0_REG __REG(0x7F005030) +#define UINTSP0_REG __REG(0x7F005034) +#define UINTM0_REG __REG(0x7F005038) + +#define ULCON1_REG __REG(0x7F005400) +#define UCON1_REG __REG(0x7F005404) +#define UFCON1_REG __REG(0x7F005408) +#define UMCON1_REG __REG(0x7F00540C) +#define UTRSTAT1_REG __REG(0x7F005410) +#define UERSTAT1_REG __REG(0x7F005414) +#define UFSTAT1_REG __REG(0x7F005418) +#define UMSTAT1_REG __REG(0x7F00541c) +#define UTXH1_REG __REG(0x7F005420) +#define URXH1_REG __REG(0x7F005424) +#define UBRDIV1_REG __REG(0x7F005428) +#define UDIVSLOT1_REG __REG(0x7F00542c) +#define UINTP1_REG __REG(0x7F005430) +#define UINTSP1_REG __REG(0x7F005434) +#define UINTM1_REG __REG(0x7F005438) + +#define UTRSTAT_TX_EMPTY (1 << 2) +#define UTRSTAT_RX_READY (1 << 0) +#define UART_ERR_MASK 0xF + +/* + * PWM timer + */ +#define ELFIN_TIMER_BASE 0x7F006000 + +#define TCFG0_REG __REG(0x7F006000) +#define TCFG1_REG __REG(0x7F006004) +#define TCON_REG __REG(0x7F006008) +#define TCNTB0_REG __REG(0x7F00600c) +#define TCMPB0_REG __REG(0x7F006010) +#define TCNTO0_REG __REG(0x7F006014) +#define TCNTB1_REG __REG(0x7F006018) +#define TCMPB1_REG __REG(0x7F00601c) +#define TCNTO1_REG __REG(0x7F006020) +#define TCNTB2_REG __REG(0x7F006024) +#define TCMPB2_REG __REG(0x7F006028) +#define TCNTO2_REG __REG(0x7F00602c) +#define TCNTB3_REG __REG(0x7F006030) +#define TCMPB3_REG __REG(0x7F006034) +#define TCNTO3_REG __REG(0x7F006038) +#define TCNTB4_REG __REG(0x7F00603c) +#define TCNTO4_REG __REG(0x7F006040) + +/* Fields */ +#define fTCFG0_DZONE Fld(8, 16) /* the dead zone length (=timer 0) */ +#define fTCFG0_PRE1 Fld(8, 8) /* prescaler value for time 2,3,4 */ +#define fTCFG0_PRE0 Fld(8, 0) /* prescaler value for time 0,1 */ +#define fTCFG1_MUX4 Fld(4, 16) +/* bits */ +#define TCFG0_DZONE(x) FInsrt((x), fTCFG0_DZONE) +#define TCFG0_PRE1(x) FInsrt((x), fTCFG0_PRE1) +#define TCFG0_PRE0(x) FInsrt((x), fTCFG0_PRE0) +#define TCON_4_AUTO (1 << 22) /* auto reload on/off for Timer 4 */ +#define TCON_4_UPDATE (1 << 21) /* manual Update TCNTB4 */ +#define TCON_4_ONOFF (1 << 20) /* 0: Stop, 1: start Timer 4 */ +#define COUNT_4_ON (TCON_4_ONOFF * 1) +#define COUNT_4_OFF (TCON_4_ONOFF * 0) +#define TCON_3_AUTO (1 << 19) /* auto reload on/off for Timer 3 */ +#define TIMER3_ATLOAD_ON (TCON_3_AUTO * 1) +#define TIMER3_ATLAOD_OFF FClrBit(TCON, TCON_3_AUTO) +#define TCON_3_INVERT (1 << 18) /* 1: Inverter on for TOUT3 */ +#define TIMER3_IVT_ON (TCON_3_INVERT * 1) +#define TIMER3_IVT_OFF (FClrBit(TCON, TCON_3_INVERT)) +#define TCON_3_MAN (1 << 17) /* manual Update TCNTB3,TCMPB3 */ +#define TIMER3_MANUP (TCON_3_MAN*1) +#define TIMER3_NOP (FClrBit(TCON, TCON_3_MAN)) +#define TCON_3_ONOFF (1 << 16) /* 0: Stop, 1: start Timer 3 */ +#define TIMER3_ON (TCON_3_ONOFF * 1) +#define TIMER3_OFF (FClrBit(TCON, TCON_3_ONOFF)) + +#if defined(CONFIG_CLK_400_100_50) +#define STARTUP_AMDIV 400 +#define STARTUP_MDIV 400 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_400_133_66) +#define STARTUP_AMDIV 400 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_533_133_66) +#define STARTUP_AMDIV 533 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#elif defined(CONFIG_CLK_667_133_66) +#define STARTUP_AMDIV 667 +#define STARTUP_MDIV 533 +#define STARTUP_PDIV 6 +#define STARTUP_SDIV 1 +#endif + +#define STARTUP_PCLKDIV 3 +#define STARTUP_HCLKX2DIV 1 +#define STARTUP_HCLKDIV 1 +#define STARTUP_MPLLDIV 1 +#define STARTUP_APLLDIV 0 + +#define CLK_DIV_VAL ((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \ + (STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV) +#define MPLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_MPLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_MDIV) + +#if defined(CONFIG_SYNC_MODE) +#define APLL_VAL ((1 << 31) | (STARTUP_MDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_MDIV) +#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ + (STARTUP_HCLKDIV + 1)) +#else +#define APLL_VAL ((1 << 31) | (STARTUP_AMDIV << 16) | \ + (STARTUP_PDIV << 8) | STARTUP_SDIV) +#define STARTUP_APLL (((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \ + STARTUP_PDIV) * STARTUP_AMDIV) +#define STARTUP_HCLK (STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \ + (STARTUP_HCLKDIV + 1)) +#endif + + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define DMC1_MEM_CFG 0x80010012 /* Chip1, Burst4, Row/Column bit */ +#define DMC1_MEM_CFG2 0xB45 +#define DMC1_CHIP0_CFG 0x150F8 /* 0x4000_0000 ~ 0x43ff_ffff (64MB) */ +#define DMC_DDR_32_CFG 0x0 /* 32bit, DDR */ + +/* Memory Parameters */ +/* DDR Parameters */ +#define DDR_tREFRESH 7800 /* ns */ +#define DDR_tRAS 45 /* ns (min: 45ns)*/ +#define DDR_tRC 68 /* ns (min: 67.5ns)*/ +#define DDR_tRCD 23 /* ns (min: 22.5ns)*/ +#define DDR_tRFC 80 /* ns (min: 80ns)*/ +#define DDR_tRP 23 /* ns (min: 22.5ns)*/ +#define DDR_tRRD 15 /* ns (min: 15ns)*/ +#define DDR_tWR 15 /* ns (min: 15ns)*/ +#define DDR_tXSR 120 /* ns (min: 120ns)*/ +#define DDR_CASL 3 /* CAS Latency 3 */ + +/* + * mDDR memory configuration + */ + +#define NS_TO_CLK(t) ((STARTUP_HCLK / 1000 * (t) - 1) / 1000000) + +#define DMC_DDR_BA_EMRS 2 +#define DMC_DDR_MEM_CASLAT 3 +/* 6 Set Cas Latency to 3 */ +#define DMC_DDR_CAS_LATENCY (DDR_CASL << 1) +/* Min 0.75 ~ 1.25 */ +#define DMC_DDR_t_DQSS 1 +/* Min 2 tck */ +#define DMC_DDR_t_MRD 2 +/* 7, Min 45ns */ +#define DMC_DDR_t_RAS (NS_TO_CLK(DDR_tRAS) + 1) +/* 10, Min 67.5ns */ +#define DMC_DDR_t_RC (NS_TO_CLK(DDR_tRC) + 1) +/* 4,5(TRM), Min 22.5ns */ +#define DMC_DDR_t_RCD (NS_TO_CLK(DDR_tRCD) + 1) +#define DMC_DDR_schedule_RCD ((DMC_DDR_t_RCD - 3) << 3) +/* 11,18(TRM) Min 80ns */ +#define DMC_DDR_t_RFC (NS_TO_CLK(DDR_tRFC) + 1) +#define DMC_DDR_schedule_RFC ((DMC_DDR_t_RFC - 3) << 5) +/* 4, 5(TRM) Min 22.5ns */ +#define DMC_DDR_t_RP (NS_TO_CLK(DDR_tRP) + 1) +#define DMC_DDR_schedule_RP ((DMC_DDR_t_RP - 3) << 3) +/* 3, Min 15ns */ +#define DMC_DDR_t_RRD (NS_TO_CLK(DDR_tRRD) + 1) +/* Min 15ns */ +#define DMC_DDR_t_WR (NS_TO_CLK(DDR_tWR) + 1) +#define DMC_DDR_t_WTR 2 +/* 1tck + tIS(1.5ns) */ +#define DMC_DDR_t_XP 2 +/* 17, Min 120ns */ +#define DMC_DDR_t_XSR (NS_TO_CLK(DDR_tXSR) + 1) +#define DMC_DDR_t_ESR DMC_DDR_t_XSR +/* TRM 2656 */ +#define DMC_DDR_REFRESH_PRD (NS_TO_CLK(DDR_tREFRESH)) +/* 2b01 : mDDR */ +#define DMC_DDR_USER_CONFIG 1 + +#ifndef __ASSEMBLY__ +enum s3c64xx_uarts_nr { + S3C64XX_UART0, + S3C64XX_UART1, + S3C64XX_UART2, +}; + +#include "s3c64x0.h" + +static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr) +{ + return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400)); +} +#endif + +#endif /*__S3C6400_H__*/ diff --git a/include/s3c64x0.h b/include/s3c64x0.h new file mode 100644 index 0000000000..0bbf1d0c43 --- /dev/null +++ b/include/s3c64x0.h @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2003 + * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : S3C64XX.h + * Version : 31.3.2003 + * + * common stuff for SAMSUNG S3C64XX SoC + ************************************************/ + +#ifndef __S3C64XX_H__ +#define __S3C64XX_H__ + +#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400) +#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration! +#endif + +#include <asm/types.h> + +/* UART (see manual chapter 11) */ +typedef struct { + volatile u32 ULCON; + volatile u32 UCON; + volatile u32 UFCON; + volatile u32 UMCON; + volatile u32 UTRSTAT; + volatile u32 UERSTAT; + volatile u32 UFSTAT; + volatile u32 UMSTAT; +#ifdef __BIG_ENDIAN + volatile u8 res1[3]; + volatile u8 UTXH; + volatile u8 res2[3]; + volatile u8 URXH; +#else /* Little Endian */ + volatile u8 UTXH; + volatile u8 res1[3]; + volatile u8 URXH; + volatile u8 res2[3]; +#endif + volatile u32 UBRDIV; +#ifdef __BIG_ENDIAN + volatile u8 res3[2]; + volatile u16 UDIVSLOT; +#else + volatile u16 UDIVSLOT; + volatile u8 res3[2]; +#endif +} s3c64xx_uart; + +/* PWM TIMER (see manual chapter 10) */ +typedef struct { + volatile u32 TCNTB; + volatile u32 TCMPB; + volatile u32 TCNTO; +} s3c64xx_timer; + +typedef struct { + volatile u32 TCFG0; + volatile u32 TCFG1; + volatile u32 TCON; + s3c64xx_timer ch[4]; + volatile u32 TCNTB4; + volatile u32 TCNTO4; +} s3c64xx_timers; + +#endif /*__S3C64XX_H__*/ diff --git a/lib_arm/board.c b/lib_arm/board.c index 6e3ef08800..5ade882a97 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -430,9 +430,9 @@ void start_armboot (void) /* Perform network card initialisation if necessary */ #ifdef CONFIG_DRIVER_TI_EMAC -extern void dm644x_eth_set_mac_addr (const u_int8_t *addr); +extern void davinci_eth_set_mac_addr (const u_int8_t *addr); if (getenv ("ethaddr")) { - dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr); + davinci_eth_set_mac_addr(gd->bd->bi_enetaddr); } #endif diff --git a/lib_m68k/board.c b/lib_m68k/board.c index e59c6b0859..4fee35aeab 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -63,6 +63,8 @@ #include <spi.h> #endif +#include <nand.h> + DECLARE_GLOBAL_DATA_PTR; static char *failed = "*** failed ***\n"; diff --git a/nand_spl/board/samsung/smdk6400/Makefile b/nand_spl/board/samsung/smdk6400/Makefile new file mode 100644 index 0000000000..ae9eb2a94d --- /dev/null +++ b/nand_spl/board/samsung/smdk6400/Makefile @@ -0,0 +1,106 @@ +# +# (C) Copyright 2006-2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +CONFIG_NAND_SPL = y + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o cpu_init.o lowlevel_init.o +COBJS = nand_boot.o nand_ecc.o s3c64xx.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)start.S: + @rm -f $@ + @ln -s $(TOPDIR)/cpu/arm1176/start.S $@ + +# from SoC directory +$(obj)cpu_init.S: + @rm -f $@ + @ln -s $(TOPDIR)/cpu/arm1176/s3c64xx/cpu_init.S $@ + +# from board directory +$(obj)lowlevel_init.S: + @rm -f $@ + @ln -s $(TOPDIR)/board/samsung/smdk6400/lowlevel_init.S $@ + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $@ + @ln -s $(TOPDIR)/nand_spl/nand_boot.c $@ + +# from drivers/mtd/nand directory +$(obj)nand_ecc.c: + @rm -f $@ + @ln -s $(TOPDIR)/drivers/mtd/nand/nand_ecc.c $@ + +$(obj)s3c64xx.c: + @rm -f $@ + @ln -s $(TOPDIR)/drivers/mtd/nand/s3c64xx.c $@ + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/samsung/smdk6400/config.mk b/nand_spl/board/samsung/smdk6400/config.mk new file mode 100644 index 0000000000..4b16230917 --- /dev/null +++ b/nand_spl/board/samsung/smdk6400/config.mk @@ -0,0 +1,40 @@ +# +# (C) Copyright 2006 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# Samsung S3C64xx Reference Platform (smdk6400) board + +# TEXT_BASE for SPL: +# +# On S3C64xx platforms the SPL is located in SRAM at 0. +# +# TEXT_BASE = 0 + +include $(TOPDIR)/board/$(BOARDDIR)/config.mk + +# PAD_TO used to generate a 4kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 4096 +PAD_TO := $(shell expr $$[$(TEXT_BASE) + 4096]) + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds new file mode 100644 index 0000000000..1bf022c030 --- /dev/null +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + start.o (.text) + cpu_init.o (.text) + nand_boot.o (.text) + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} @@ -576,7 +576,7 @@ extern int at91rm9200_miiphy_initialize(bd_t *bis); extern int emac4xx_miiphy_initialize(bd_t *bis); extern int mcf52x2_miiphy_initialize(bd_t *bis); extern int ns7520_miiphy_initialize(bd_t *bis); -extern int dm644x_eth_miiphy_initialize(bd_t *bis); +extern int davinci_eth_miiphy_initialize(bd_t *bis); int eth_initialize(bd_t *bis) @@ -599,7 +599,7 @@ int eth_initialize(bd_t *bis) ns7520_miiphy_initialize(bis); #endif #if defined(CONFIG_DRIVER_TI_EMAC) - dm644x_eth_miiphy_initialize(bis); + davinci_eth_miiphy_initialize(bis); #endif return 0; } |