summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/cpu/mpc8xx/Kconfig4
-rw-r--r--arch/powerpc/dts/Makefile1
-rw-r--r--arch/powerpc/dts/cmpc885.dts94
-rw-r--r--board/cssi/MAINTAINERS2
-rw-r--r--board/cssi/cmpc885/Kconfig23
-rw-r--r--board/cssi/cmpc885/Makefile10
-rw-r--r--board/cssi/cmpc885/cmpc885.c830
-rw-r--r--board/cssi/cmpc885/cmpc885.env7
-rw-r--r--board/cssi/cmpc885/nand.c47
-rw-r--r--board/cssi/cmpc885/sdram.c107
-rw-r--r--board/cssi/cmpc885/u-boot.lds95
-rw-r--r--configs/CMPC885_defconfig110
-rw-r--r--include/configs/cmpc885.h29
13 files changed, 1359 insertions, 0 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index 65293ae728..628d3617bc 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -11,6 +11,9 @@ choice
config TARGET_MCR3000
bool "Support MCR3000 board from CSSI"
+config TARGET_CMPC885
+ bool "Support CMPC885 board from CSSI"
+
endchoice
choice
@@ -86,4 +89,5 @@ config SYS_DER
source "board/cssi/mcr3000/Kconfig"
+source "board/cssi/cmpc885/Kconfig"
endmenu
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index a4b0d7ddc4..26b592b85d 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_TARGET_TUGE1) += kmtuge1.dtb
dtb-$(CONFIG_TARGET_TUXX1) += kmtuxa1.dtb
dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb
dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb
+dtb-$(CONFIG_TARGET_CMPC885) += cmpc885.dtb
include $(srctree)/scripts/Makefile.dts
diff --git a/arch/powerpc/dts/cmpc885.dts b/arch/powerpc/dts/cmpc885.dts
new file mode 100644
index 0000000000..adda0f3e9d
--- /dev/null
+++ b/arch/powerpc/dts/cmpc885.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * CMPC885 Device Tree Source
+ *
+ * Copyright 2020 CS Group
+ *
+ */
+
+/dts-v1/;
+
+/ {
+ model = "CMPC885";
+ compatible = "fsl, cmpc885", "fsl,mod885";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ stdout-path = &SERIAL;
+ };
+
+ WDT: watchdog@0 {
+ device_type = "watchdog";
+ compatible = "fsl,pq1-wdt";
+ };
+
+ SERIAL: serial {
+ compatible = "fsl,pq1-smc";
+ };
+
+ FEC1: fec@0 {
+ compatible = "fsl,pq1-fec1";
+ };
+
+ FEC2: fec@1 {
+ compatible = "fsl,pq1-fec2";
+ };
+
+ soc: immr@ff000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device-type = "soc";
+ compatible = "simple-bus";
+ ranges = <0 0xff000000 0x4000>;
+ reg = <0xff000000 0x00000200>;
+
+ CPM1_PIO_B: gpio-controller@ab8 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-b";
+ reg = <0xab8 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_D: gpio-controller@970 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-d";
+ reg = <0x970 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_A: gpio-controller@950 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-a";
+ reg = <0x950 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_C: gpio-controller@960 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-c";
+ reg = <0x960 0x10>;
+ gpio-controller;
+ };
+
+ CPM1_PIO_E: gpio-controller@ac8 {
+ #gpio-cells = <2>;
+ compatible = "fsl,cpm1-pario-bank-e";
+ reg = <0xac8 0x18>;
+ gpio-controller;
+ };
+
+ spi: spi@aa0 {
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <0>;
+ compatible = "fsl,mpc8xx-spi";
+ gpios = <&CPM1_PIO_B 21 1>; /* /EEPROM_CS ACTIVE_LOW */
+
+ eeprom@0 {
+ cell-index = <1>;
+ };
+ };
+ };
+};
diff --git a/board/cssi/MAINTAINERS b/board/cssi/MAINTAINERS
index e1c0baa708..d8e7b5e9b6 100644
--- a/board/cssi/MAINTAINERS
+++ b/board/cssi/MAINTAINERS
@@ -4,3 +4,5 @@ S: Maintained
F: board/cssi/
F: include/configs/mcr3000.h
F: configs/MCR3000_defconfig
+F: include/configs/cmpc885.h
+F: configs/CMPC885_defconfig
diff --git a/board/cssi/cmpc885/Kconfig b/board/cssi/cmpc885/Kconfig
new file mode 100644
index 0000000000..4a23f89aa1
--- /dev/null
+++ b/board/cssi/cmpc885/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_CMPC885
+
+config SYS_BOARD
+ default "cmpc885"
+
+config SYS_VENDOR
+ default "cssi"
+
+config SYS_CONFIG_NAME
+ default "cmpc885"
+
+config TEXT_BASE
+ default 0x40000000
+
+config CPLD_BASE
+ hex
+ default 0xc8000000
+
+config FPGA_BASE
+ hex
+ default 0xd0000000
+
+endif
diff --git a/board/cssi/cmpc885/Makefile b/board/cssi/cmpc885/Makefile
new file mode 100644
index 0000000000..6c055097cd
--- /dev/null
+++ b/board/cssi/cmpc885/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2010-2020 CS Group
+# Charles Frey <charles.frey@c-s.fr>
+# Christophe Leroy <christophe.leroy@c-s.fr>
+#
+
+obj-y += cmpc885.o
+obj-y += sdram.o
+obj-$(CONFIG_CMD_NAND) += nand.o
diff --git a/board/cssi/cmpc885/cmpc885.c b/board/cssi/cmpc885/cmpc885.c
new file mode 100644
index 0000000000..cde9a558ef
--- /dev/null
+++ b/board/cssi/cmpc885/cmpc885.c
@@ -0,0 +1,830 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Charles Frey <charles.frey@c-s.fr>
+ * Florent Trinh Thai <florent.trinh-thai@c-s.fr>
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ *
+ * Board specific routines for the CMPC885 board
+ */
+
+#include <env.h>
+#include <common.h>
+#include <mpc8xx.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <watchdog.h>
+#include <serial.h>
+#include <hang.h>
+#include <flash.h>
+#include <init.h>
+#include <fdt_support.h>
+#include <linux/delay.h>
+
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BOARD_CMPC885 "cmpc885"
+#define BOARD_MCR3000_2G "mcr3k_2g"
+
+#define TYPE_MCR 0x22
+
+#define ADDR_CPLD_R_RESET ((unsigned short __iomem *)CONFIG_CPLD_BASE)
+#define ADDR_CPLD_R_ETAT ((unsigned short __iomem *)(CONFIG_CPLD_BASE + 2))
+#define ADDR_CPLD_R_TYPE ((unsigned char __iomem *)(CONFIG_CPLD_BASE + 3))
+
+#define ADDR_FPGA_R_BASE ((unsigned char __iomem *)CONFIG_FPGA_BASE)
+#define ADDR_FPGA_R_ALARMES_IN ((unsigned char __iomem *)CONFIG_FPGA_BASE + 0x31)
+
+#define FPGA_R_ACQ_AL_FAV 0x04
+#define R_ETAT_PRES_BASE 0x0040
+
+#define R_RESET_STATUS 0x0400
+#define R_RST_STATUS 0x0004
+
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ const char *sync = "receive";
+
+ ft_cpu_setup(blob, bd);
+
+ /* BRG */
+ do_fixup_by_path_u32(blob, "/soc/cpm", "brg-frequency",
+ bd->bi_busfreq, 1);
+ /* MAC addr */
+ fdt_fixup_ethernet(blob);
+
+ /* Bus Frequency for CPM */
+ do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
+
+ /* E1 interface - Set data rate */
+ do_fixup_by_path_u32(blob, "/localbus/e1", "data-rate", 2, 1);
+
+ /* E1 interface - Set channel phase to 0 */
+ do_fixup_by_path_u32(blob, "/localbus/e1", "channel-phase", 0, 1);
+
+ /* E1 interface - rising edge sync pulse transmit */
+ do_fixup_by_path(blob, "/localbus/e1", "rising-edge-sync-pulse",
+ sync, strlen(sync), 1);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ serial_puts("Board: ");
+
+ /* Is a motherboard present ? */
+ if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+ switch (in_8(ADDR_FPGA_R_BASE)) {
+ case TYPE_MCR:
+ printf("MCR3000_2G (CS GROUP)\n");
+ break;
+ default:
+ printf("Unknown\n");
+ for (;;)
+ ;
+ break;
+ }
+ } else {
+ printf("CMPC885 (CS GROUP)\n");
+ }
+ return 0;
+}
+
+#define SPI_EEPROM_READ 0x03
+#define MAX_SPI_BYTES 0x20
+
+#define EE_OFF_MAC1 0x13
+#define EE_OFF_MAC2 0x19
+
+/* Reads MAC addresses from SPI EEPROM */
+static int setup_mac(void)
+{
+ struct udevice *eeprom;
+ struct spi_slave *slave;
+ char name[30], *str;
+ uchar din[MAX_SPI_BYTES];
+ uchar dout[MAX_SPI_BYTES] = {SPI_EEPROM_READ, 0, 0};
+ int bitlen = 256, cs = 0, mode = 0, bus = 0, ret;
+ unsigned long ident = 0x08005120;
+
+ snprintf(name, sizeof(name), "generic_%d:%d", bus, cs);
+
+ str = strdup(name);
+ if (!str)
+ return -1;
+
+ ret = uclass_get_device(UCLASS_SPI, 0, &eeprom);
+ if (ret) {
+ printf("Could not enable Serial Peripheral Interface (SPI).\n");
+ return -1;
+ }
+
+ ret = _spi_get_bus_and_cs(bus, cs, 1000000, mode, "spi_generic_drv", str, &eeprom, &slave);
+ if (ret)
+ return ret;
+
+ ret = spi_claim_bus(slave);
+
+ ret = spi_xfer(slave, bitlen, dout, din, SPI_XFER_BEGIN | SPI_XFER_END);
+ if (ret) {
+ printf("Error %d during SPI transaction\n", ret);
+ return ret;
+ }
+
+ if (memcmp(din + EE_OFF_MAC1, &ident, sizeof(ident)) == 0)
+ eth_env_set_enetaddr("ethaddr", din + EE_OFF_MAC1);
+
+ if (memcmp(din + EE_OFF_MAC2, &ident, sizeof(ident)) == 0)
+ eth_env_set_enetaddr("eth1addr", din + EE_OFF_MAC2);
+
+ spi_release_bus(slave);
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ u8 val;
+
+ val = in_8(ADDR_FPGA_R_BASE);
+
+ /* Verify mother board presence */
+ if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+ /* identify the type of mother board */
+ switch (val) {
+ case TYPE_MCR:
+ /* if at boot alarm button is pressed, delay boot */
+ if ((in_8(ADDR_FPGA_R_ALARMES_IN) & FPGA_R_ACQ_AL_FAV) == 0)
+ env_set("bootdelay", "60");
+
+ env_set("config", BOARD_MCR3000_2G);
+ env_set("hostname", BOARD_MCR3000_2G);
+ break;
+ default:
+ env_set("config", BOARD_CMPC885);
+ env_set("hostname", BOARD_CMPC885);
+ break;
+ }
+ } else {
+ printf("no mother board detected");
+ env_set("config", BOARD_CMPC885);
+ env_set("hostname", BOARD_CMPC885);
+ }
+
+ if (setup_mac())
+ printf("Error retrieving mac addresses\n");
+
+ /* Protection ON by default */
+ flash_protect(FLAG_PROTECT_SET, CFG_SYS_FLASH_BASE, 0xffffffff, &flash_info[0]);
+
+ return 0;
+}
+
+static void iop_setup_mcr(void)
+{
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ iop8xx_t __iomem *iop = &immr->im_ioport;
+ cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+ /* Wait reset on FPGA_F */
+ udelay(100);
+
+ /* We must initialize data before changing direction */
+ setbits_be16(&iop->iop_pcdat, 0x088E);
+ setbits_be16(&iop->iop_pddat, 0x0001);
+ setbits_be32(&cp->cp_pbdat, 0x00029510);
+ setbits_be32(&cp->cp_pedat, 0x00000002);
+
+ /*
+ * PAPAR[13] = 0 [0x0004] -> GPIO: ()
+ * PAPAR[12] = 0 [0x0008] -> GPIO: ()
+ * PAPAR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
+ * PAPAR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
+ * PAPAR[7] = 1 [0x0100] -> GPIO: (TDM_BCLK_MPC)
+ * PAPAR[6] = 1 [0x0200] -> GPIO: (CLK2)
+ */
+ clrsetbits_be16(&iop->iop_papar, 0x03CC, 0x03C0);
+
+ /*
+ * PBODR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+ */
+ setbits_be16(&cp->cp_pbodr, 0x00008000);
+
+ /*
+ * PBDIR[27] = 1 [0x00000010] -> GPIO: (WR_TEMP2)
+ * PBDIR[26] = 1 [0x00000020] -> GPIO: (BRG02)
+ * PBDIR[23] = 1 [0x00000100] -> GPIO: (CS_TEMP2)
+ * PBDIR[18] = 1 [0x00002000] -> GPIO: (RTS2)
+ * PBDIR[16] = 1 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+ * PBDIR[15] = 1 [0x00010000] -> GPIO: (BRG03)
+ * PBDIR[14] = 1 [0x00020000] -> GPIO: (CS_TEMP)
+ */
+ setbits_be32(&cp->cp_pbdir, 0x0003A130);
+
+ /*
+ * PBPAR[20] = 1 [0x00000800] -> GPIO: (SMRXD2)
+ * PBPAR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+ * PBPAR[16] = 0 [0x00008000] -> GPIO: (PROG_FPGA_MEZZ)
+ */
+ clrsetbits_be32(&cp->cp_pbpar, 0x0000C800, 0x00000800);
+
+ /*
+ * PCPAR[14] = 0 [0x0002] -> GPIO: (CS_POT2)
+ */
+ clrbits_be16(&iop->iop_pcpar, 0x0002);
+
+ /*
+ * PDPAR[14] = 1 [0x0002] -> GPIO: (TDM_FS_MPC)
+ * PDPAR[11] = 1 [0x0010] -> GPIO: (RXD3)
+ * PDPAR[10] = 1 [0x0020] -> GPIO: (TXD3)
+ * PDPAR[9] = 1 [0x0040] -> GPIO: (TXD4)
+ * PDPAR[7] = 1 [0x0100] -> GPIO: (RTS3)
+ * PDPAR[5] = 1 [0x0400] -> GPIO: (CLK8)
+ * PDPAR[3] = 1 [0x1000] -> GPIO: (CLK7)
+ */
+ setbits_be16(&iop->iop_pdpar, 0x1572);
+
+ /*
+ * PEPAR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+ * PEPAR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+ * PEPAR[25] = 1 [0x00000040] -> GPIO: (RXD4)
+ * PEPAR[24] = 1 [0x00000080] -> GPIO: (BRG01)
+ * PEPAR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+ * PEPAR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+ * PEPAR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+ * PEPAR[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+ * PEPAR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+ * PEPAR[17] = 1 [0x00004000] -> GPIO: (CLK5)
+ * PEPAR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+ * PEPAR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+ * PEPAR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+ */
+ clrsetbits_be32(&cp->cp_pepar, 0x0003DFF0, 0x0003DEF0);
+
+ /*
+ * PADIR[9] = 1 [0x0040] -> GPIO: (PCM_IN_12_MPC)
+ * PADIR[8] = 1 [0x0080] -> GPIO: (PCM_OUT_12_MPC)
+ * PADIR[5] = 1 [0x0400] -> GPIO: ()
+ */
+ setbits_be16(&iop->iop_padir, 0x04C0);
+
+ /*
+ * PCDIR[15] = 1 [0x0001] -> GPIO: (WP_EEPROM2)
+ * PCDIR[14] = 1 [0x0002] -> GPIO: (CS_POT2)
+ * PCDIR[13] = 1 [0x0004] -> GPIO: (CS_POT1)
+ * PCDIR[12] = 1 [0x0008] -> GPIO: (CS_EEPROM2)
+ * PCDIR[8] = 1 [0x0080] -> GPIO: (CS_CODEC_FAV)
+ * PCDIR[4] = 1 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+ */
+ setbits_be16(&iop->iop_pcdir, 0x088F);
+
+ /*
+ * PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
+ * PDDIR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
+ * PDDIR[2] = x [0x2000] -> Reserved
+ * PDDIR[1] = 0 [0x4000] -> ODR for PD10 : (TXD3)
+ * PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
+ */
+ clrsetbits_be16(&iop->iop_pddir, 0xC240, 0x0040);
+
+ /*
+ * PEDIR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+ * PEDIR[27] = 1 [0x00000010] -> GPIO: (R2_RXER)
+ * PEDIR[26] = 1 [0x00000020] -> GPIO: (R2_CRS_DV)
+ * PEDIR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+ * PEDIR[22] = 1 [0x00000200] -> GPIO: (R2_RXD1)
+ * PEDIR[21] = 1 [0x00000400] -> GPIO: (R2_RXD0)
+ * PEDIR[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+ * PEDIR[18] = 1 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+ * PEDIR[16] = 1 [0x00008000] -> GPIO: (R2_REF_CLK)
+ * PEDIR[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+ * PEDIR[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+ */
+ clrsetbits_be32(&cp->cp_pedir, 0x0003B732, 0x0003B632);
+
+ /*
+ * PAODR[10] = 1 [0x0020] -> GPIO: (INIT_FPGA_F)
+ */
+ setbits_be16(&iop->iop_paodr, 0x0020); // set_bit
+
+ /*
+ * PEODR[30] = 1 [0x00000002] -> GPIO: (FPGA_FIRMWARE)
+ * PEODR[18] = 1 [0x00002000] -> GPIO: (FPGA_RADIO)
+ */
+ setbits_be32(&cp->cp_peodr, 0x00002002);
+
+ /*
+ * PESO[24] = 1 [0x00000080] -> GPIO: (BRG01)
+ * PESO[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+ * PESO[20] = 1 [0x00000800] -> GPIO: (SMTXD2)
+ * PESO[19] = 1 [0x00001000] -> GPIO: (R2_TXEN)
+ * PESO[15] = 1 [0x00010000] -> GPIO: (R2_TXD1)
+ * PESO[14] = 1 [0x00020000] -> GPIO: (R2_TXD0)
+ */
+ clrsetbits_be32(&cp->cp_peso, 0x00031980, 0x00031880);
+
+ /* Disable CS for device */
+ /* PROGFPGA down */
+ clrbits_be32(&cp->cp_pbdat, 0x00008000);
+
+ /* PROGFPGA down */
+ clrbits_be32(&cp->cp_pedat, 0x00002000);
+ udelay(1); /* Wait more than 300ns */
+
+ /*
+ * We do not set the PROG signal of the C4E1 because
+ * there is a conflic with the CS of the EEPROM.
+ * I don't know why there is not the same problem
+ * with the FPGA_R
+ */
+
+ /* PROGFPGA up */
+ setbits_be32(&cp->cp_pedat, 0x00002000);
+}
+
+static void iop_setup_cmpc885(void)
+{
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ iop8xx_t __iomem *iop = &immr->im_ioport;
+ cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+ /* We must initialize data before changing direction */
+ out_be16(&iop->iop_pcdat, 0x0000);
+ out_be16(&iop->iop_pddat, 0x0001);
+
+ out_be32(&cp->cp_pbdat, 0x00021400);
+ out_be32(&cp->cp_pedat, 0x00000000);
+
+ /*
+ * PAPAR[13] = 0 [0x0004] -> GPIO: ()
+ * PAPAR[12] = 0 [0x0008] -> GPIO: ()
+ * PAPAR[9] = 0 [0x0040] -> GPIO: ()
+ * PAPAR[8] = 0 [0x0080] -> GPIO: ()
+ * PAPAR[7] = 0 [0x0100] -> GPIO: ()
+ * PAPAR[6] = 0 [0x0200] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_papar, 0x03CC);
+
+ /*
+ * PBPAR[20] = 0 [0x00000800] -> GPIO: ()
+ * PBPAR[17] = 0 [0x00004000] -> GPIO: ()
+ * PBPAR[16] = 0 [0x00008000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_pbpar, 0x0000C800);
+
+ /*
+ * PCPAR[14] = 0 [0x0002] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_pcpar, 0x0002);
+
+ /*
+ * PDPAR[14] = 0 [0x0002] -> GPIO: ()
+ * PDPAR[11] = 0 [0x0010] -> GPIO: ()
+ * PDPAR[10] = 0 [0x0020] -> GPIO: ()
+ * PDPAR[9] = 0 [0x0040] -> GPIO: ()
+ * PDPAR[7] = 0 [0x0100] -> GPIO: ()
+ * PDPAR[5] = 0 [0x0400] -> GPIO: ()
+ * PDPAR[3] = 0 [0x1000] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_pdpar, 0x1572);
+
+ /*
+ * PEPAR[27] = 0 [0x00000010] -> GPIO: ()
+ * PEPAR[26] = 0 [0x00000020] -> GPIO: ()
+ * PEPAR[25] = 0 [0x00000040] -> GPIO: ()
+ * PEPAR[24] = 0 [0x00000080] -> GPIO: ()
+ * PEPAR[23] = 0 [0x00000100] -> GPIO: ()
+ * PEPAR[22] = 0 [0x00000200] -> GPIO: ()
+ * PEPAR[21] = 0 [0x00000400] -> GPIO: ()
+ * PEPAR[20] = 0 [0x00000800] -> GPIO: ()
+ * PEPAR[19] = 0 [0x00001000] -> GPIO: ()
+ * PEPAR[17] = 0 [0x00004000] -> GPIO: ()
+ * PEPAR[16] = 0 [0x00008000] -> GPIO: ()
+ * PEPAR[15] = 0 [0x00010000] -> GPIO: ()
+ * PEPAR[14] = 0 [0x00020000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_pepar, 0x0003DFF0);
+
+ /*
+ * PADIR[9] = 0 [0x0040] -> GPIO: ()
+ * PADIR[8] = 0 [0x0080] -> GPIO: ()
+ * PADIR[5] = 0 [0x0400] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_padir, 0x04C0);
+
+ /*
+ * In/Out or per. Function 0/1
+ * PBDIR[27] = 0 [0x00000010] -> GPIO: ()
+ * PBDIR[26] = 0 [0x00000020] -> GPIO: ()
+ * PBDIR[23] = 0 [0x00000100] -> GPIO: ()
+ * PBDIR[17] = 0 [0x00004000] -> GPIO: ()
+ * PBDIR[16] = 0 [0x00008000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_pbdir, 0x0000C130);
+
+ /*
+ * PCDIR[15] = 0 [0x0001] -> GPIO: ()
+ * PCDIR[14] = 0 [0x0002] -> GPIO: ()
+ * PCDIR[13] = 0 [0x0004] -> GPIO: ()
+ * PCDIR[12] = 0 [0x0008] -> GPIO: ()
+ * PCDIR[8] = 0 [0x0080] -> GPIO: ()
+ * PCDIR[4] = 0 [0x0800] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_pcdir, 0x088F);
+
+ /*
+ * PDDIR[9] = 0 [0x0040] -> GPIO: ()
+ * PDDIR[6] = 0 [0x0200] -> GPIO: ()
+ * PDDIR[2] = x [0x2000] -> Reserved
+ * PDDIR[1] = 0 [0x4000] -> ODR for PD10 : ()
+ * PDDIR[0] = 0 [0x8000] -> ODR for PD8 : (R_MDC)
+ */
+ clrbits_be16(&iop->iop_pddir, 0xC240);
+
+ /*
+ * PEDIR[30] = 0 [0x00000002] -> GPIO: ()
+ * PEDIR[27] = 0 [0x00000010] -> GPIO: ()
+ * PEDIR[26] = 0 [0x00000020] -> GPIO: ()
+ * PEDIR[23] = 0 [0x00000100] -> GPIO: ()
+ * PEDIR[22] = 0 [0x00000200] -> GPIO: ()
+ * PEDIR[21] = 0 [0x00000400] -> GPIO: ()
+ * PEDIR[19] = 0 [0x00001000] -> GPIO: ()
+ * PEDIR[18] = 0 [0x00002000] -> GPIO: ()
+ * PEDIR[16] = 0 [0x00008000] -> GPIO: ()
+ * PEDIR[15] = 0 [0x00010000] -> GPIO: ()
+ * PEDIR[14] = 0 [0x00020000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_pedir, 0x0003B732);
+
+ /*
+ * PAODR[10] = 0 [0x0020] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_paodr, 0x0020);
+
+ /*
+ * PBODR[16] = 0 [0x00008000] -> GPIO: ()
+ */
+ clrbits_be16(&cp->cp_pbodr, 0x00008000);
+
+ /*
+ * PEODR[30] = 0 [0x00000002] -> GPIO: ()
+ * PEODR[18] = 0 [0x00002000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_peodr, 0x00002002);
+
+ /*
+ * PESO[24] = 0 [0x00000080] -> GPIO: ()
+ * PESO[23] = 0 [0x00000100] -> GPIO: ()
+ * PESO[20] = 0 [0x00000800] -> GPIO: ()
+ * PESO[19] = 0 [0x00001000] -> GPIO: ()
+ * PESO[15] = 0 [0x00010000] -> GPIO: ()
+ * PESO[14] = 0 [0x00020000] -> GPIO: ()
+ */
+ clrbits_be32(&cp->cp_peso, 0x00031980);
+}
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+/* Specific board initialization */
+int board_early_init_r(void)
+{
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ iop8xx_t __iomem *iop = &immr->im_ioport;
+ cpm8xx_t __iomem *cp = &immr->im_cpm;
+
+ /* MPC885 Port settings common to all boards */
+ setbits_be16(&iop->iop_padat, 0x0000);
+
+ /* Port A (MPC885 reference manual - 34.2) */
+ /*
+ * In/Out or per. Function 0/1
+ * PADIR[15] = 0 [0x0001] -> GPIO: (USB_RXD)
+ * PADIR[14] = 0 [0x0002] -> GPIO: (USB_OE)
+ * PADIR[13] = 0 [0x0004] -> GPIO: ()
+ * PADIR[12] = 0 [0x0008] -> GPIO: ()
+ * PADIR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
+ * PADIR[10] = 0 [0x0020] -> GPIO: ()
+ * PADIR[7] = 0 [0x0100] -> GPIO: ()
+ * PADIR[6] = 0 [0x0200] -> GPIO: ()
+ * PADIR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
+ * PADIR[3] = 0 [0x1000] -> GPIO: (R1_RXER)
+ * PADIR[2] = 0 [0x2000] -> GPIO: (R1_CRS_DV)
+ * PADIR[1] = 0 [0x4000] -> GPIO: (R1_RXD0)
+ * PADIR[0] = 0 [0x8000] -> GPIO: (R1_RXD1)
+ */
+ clrsetbits_be16(&iop->iop_padir, 0xFB3F, 0x0810);
+
+ /*
+ * Open drain or active output
+ * PAODR[15] = x [0x0001]
+ * PAODR[14] = 0 [0x0002]
+ * PAODR[13] = x [0x0004]
+ * PAODR[12] = 0 [0x0008]
+ * PAODR[11] = 0 [0x0010]
+ * PAODR[9] = 0 [0x0040]
+ * PAODR[8] = 0 [0x0080]
+ * PAODR[7] = 0 [0x0100]
+ */
+ clrbits_be16(&iop->iop_paodr, 0x01DF);
+
+ /*
+ * GPIO or per. Function
+ * PAPAR[15] = 1 [0x0001] -> GPIO: (USB_RXD)
+ * PAPAR[14] = 1 [0x0002] -> GPIO: (USB_OE)
+ * PAPAR[11] = 1 [0x0010] -> GPIO: (R1_TXD0)
+ * PAPAR[10] = 0 [0x0020] -> GPIO: (INIT_FPGA_F)
+ * PAPAR[5] = 0 [0x0400] -> GPIO: ()
+ * PAPAR[4] = 1 [0x0800] -> GPIO: (R1_TXD1)
+ * PAPAR[3] = 1 [0x1000] -> GPIO: (R1_RXER)
+ * PAPAR[2] = 1 [0x2000] -> GPIO: (R1_CRS_DV)
+ * PAPAR[1] = 1 [0x4000] -> GPIO: (R1_RXD0)
+ * PAPAR[0] = 1 [0x8000] -> GPIO: (R1_RXD1)
+ */
+ clrsetbits_be16(&iop->iop_papar, 0xFC33, 0xF813);
+
+ /* Port B (MPC885 reference manual - 34.3) */
+ /*
+ * In/Out or per. Function 0/1
+ * PBDIR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
+ * PBDIR[30] = 1 [0x00000002] -> GPIO: (CLK)
+ * PBDIR[29] = 1 [0x00000004] -> GPIO: (MOSI)
+ * PBDIR[28] = 1 [0x00000008] -> GPIO: (MISO)
+ * PBDIR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
+ * PBDIR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
+ * PBDIR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+ * PBDIR[21] = 1 [0x00000400] -> GPIO: (CS_EEPROM)
+ * PBDIR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
+ * PBDIR[19] = 1 [0x00001000] -> GPIO: (WR_TEMP)
+ * PBDIR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+ */
+ clrsetbits_be32(&cp->cp_pbdir, 0x00005ECF, 0x0000140E);
+
+ /*
+ * Open drain or active output
+ * PBODR[31] = 0 [0x00000001] -> GPIO: (R1_REF_CLK)
+ * PBODR[30] = 0 [0x00000002] -> GPIO: (CLK)
+ * PBODR[29] = 0 [0x00000004] -> GPIO: (MOSI)
+ * PBODR[28] = 0 [0x00000008] -> GPIO: (MISO)
+ * PBODR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
+ * PBODR[26] = 0 [0x00000020] -> GPIO: (BRG02)
+ * PBODR[25] = 0 [0x00000040] -> GPIO: (SMTXD1)
+ * PBODR[24] = 0 [0x00000080] -> GPIO: (SMRXD1)
+ * PBODR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
+ * PBODR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+ * PBODR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
+ * PBODR[20] = 0 [0x00000800] -> GPIO: (SMRXD2)
+ * PBODR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
+ * PBODR[18] = 0 [0x00002000] -> GPIO: (RTS2)
+ * PBODR[17] = 0 [0x00004000] -> GPIO: (DONE_FPGA_MEZZ)
+ */
+ clrbits_be16(&cp->cp_pbodr, 0x00007FFF);
+
+ /*
+ * GPIO or per. Function
+ * PBPAR[31] = 1 [0x00000001] -> GPIO: (R1_REF_CLK)
+ * PBPAR[30] = 1 [0x00000002] -> GPIO: (CLK)
+ * PBPAR[29] = 1 [0x00000004] -> GPIO: (MOSI)
+ * PBPAR[28] = 1 [0x00000008] -> GPIO: (MISO)
+ * PBPAR[27] = 0 [0x00000010] -> GPIO: (WR_TEMP2)
+ * PBPAR[26] = 0 [0x00000020] -> GPIO: (BRG02)
+ * PBPAR[25] = 1 [0x00000040] -> GPIO: (SMTXD1)
+ * PBPAR[24] = 1 [0x00000080] -> GPIO: (SMRXD1)
+ * PBPAR[23] = 0 [0x00000100] -> GPIO: (CS_TEMP2)
+ * PBPAR[22] = 0 [0x00000200] -> GPIO: (INIT_FPGA_MEZZ)
+ * PBPAR[21] = 0 [0x00000400] -> GPIO: (CS_EEPROM)
+ * PBPAR[19] = 0 [0x00001000] -> GPIO: (WR_TEMP)
+ * PBPAR[18] = 0 [0x00002000] -> GPIO: (RTS2)
+ * PBPAR[15] = 0 [0x00010000] -> GPIO: (BRG03)
+ * PBPAR[14] = 0 [0x00020000] -> GPIO: (CS_TEMP)
+ */
+ clrsetbits_be32(&cp->cp_pbpar, 0x000337FF, 0x000000CF);
+
+ /* Port C (MPC885 Reference Manual - 34.4) */
+ /*
+ * In/Out or per. Function 0/1
+ * PCDIR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+ * PCDIR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+ * PCDIR[9] = 0 [0x0040] -> GPIO: (CTS2)
+ * PCDIR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
+ * PCDIR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
+ * PCDIR[5] = 0 [0x0400] -> GPIO: (CTS3)
+ */
+ clrsetbits_be16(&iop->iop_pcdir, 0x0770, 0x0300);
+
+ /*
+ * GPIO or per. Function
+ * PCPAR[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
+ * PCPAR[13] = 0 [0x0004] -> GPIO: (CS_POT1)
+ * PCPAR[12] = 0 [0x0008] -> GPIO: (CS_EEPROM2)
+ * PCPAR[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+ * PCPAR[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+ * PCPAR[9] = 0 [0x0040] -> GPIO: (CTS2)
+ * PCPAR[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
+ * PCPAR[7] = 1 [0x0100] -> GPIO: (USB_TXP)
+ * PCPAR[6] = 1 [0x0200] -> GPIO: (USB_TXN)
+ * PCPAR[5] = 0 [0x0400] -> GPIO: (CTS3)
+ * PCPAR[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+ */
+ clrsetbits_be16(&iop->iop_pcpar, 0x0FFD, 0x0300);
+
+ /*
+ * Special Option register
+ * PCSO[15] = 0 [0x0001] -> GPIO: (WP_EEPROM2)
+ * PCSO[14] = 0 [0x0002] -> GPIO: (CS_POT2)
+ * PCSO[13] = x [0x0004] -> Reserved
+ * PCSO[12] = x [0x0008] -> Reserved
+ * PCSO[11] = 1 [0x0010] -> GPIO: (USB_RXP)
+ * PCSO[10] = 1 [0x0020] -> GPIO: (USB_RXN)
+ * PCSO[9] = 1 [0x0040] -> GPIO: (CTS2)
+ * PCSO[8] = 0 [0x0080] -> GPIO: (CS_CODEC_FAV)
+ * PCSO[7] = 0 [0x0100] -> GPIO: (USB_TXP)
+ * PCSO[6] = 0 [0x0200] -> GPIO: (USB_TXN)
+ * PCSO[5] = 1 [0x0400] -> GPIO: (CTS3)
+ * PCSO[4] = 0 [0x0800] -> GPIO: (CS_CODEC_RADIO)
+ */
+ clrsetbits_be16(&iop->iop_pcso, 0x0FF3, 0x0470);
+
+ /*
+ * Interrupt or IO
+ * PCINT[15] = 0 [0x0001] -> GPIO: ()
+ * PCINT[14] = 0 [0x0002] -> GPIO: ()
+ * PCINT[13] = 0 [0x0004] -> GPIO: ()
+ * PCINT[12] = 0 [0x0008] -> GPIO: ()
+ * PCINT[11] = 0 [0x0010] -> GPIO: (USB_RXP)
+ * PCINT[10] = 0 [0x0020] -> GPIO: (USB_RXN)
+ * PCINT[9] = 0 [0x0040] -> GPIO: ()
+ * PCINT[8] = 0 [0x0080] -> GPIO: ()
+ * PCINT[7] = 0 [0x0100] -> GPIO: (USB_TXP)
+ * PCINT[6] = 0 [0x0200] -> GPIO: (USB_TXN)
+ * PCINT[5] = 0 [0x0400] -> GPIO: ()
+ * PCINT[4] = 0 [0x0800] -> GPIO: ()
+ */
+ clrbits_be16(&iop->iop_pcint, 0x0FFF);
+
+ /* Port D (MPC885 Reference Manual - 34.5) */
+ /*
+ * In/Out or per. Function 0/1
+ * PDDIR[15] = 1 [0x0001] -> GPIO: (CS_NAND)
+ * PDDIR[14] = 0 [0x0002] -> GPIO: (TDM_FS_MPC)
+ * PDDIR[13] = 1 [0x0004] -> GPIO: (ALE_NAND)
+ * PDDIR[12] = 1 [0x0008] -> GPIO: (CLE_NAND)
+ * PDDIR[11] = 0 [0x0010] -> GPIO: (RXD3)
+ * PDDIR[10] = 0 [0x0020] -> GPIO: (TXD3)
+ * PDDIR[9] = 1 [0x0040] -> GPIO: (TXD4)
+ * PDDIR[8] = 0 [0x0080] -> GPIO: (R_MDC)
+ * PDDIR[7] = 0 [0x0100] -> GPIO: (RTS3)
+ * PDDIR[5] = 0 [0x0400] -> GPIO: (CLK8)
+ * PDDIR[4] = 0 [0x0800] -> GPIO: (CLK4)
+ * PDDIR[3] = 0 [0x1000] -> GPIO: (CLK7)
+ */
+ clrsetbits_be16(&iop->iop_pddir, 0x1DFF, 0x004D);
+
+ /*
+ * GPIO or per. Function
+ * PDPAR[15] = 0 [0x0001] -> GPIO: (CS_NAND)
+ * PDPAR[13] = 0 [0x0004] -> GPIO: (ALE_NAND)
+ * PDPAR[12] = 0 [0x0008] -> GPIO: (CLE_NAND)
+ * PDPAR[8] = 1 [0x0080] -> GPIO: (R_MDC)
+ * PDPAR[6] = 0 [0x0200] -> GPIO: (INIT_FPGA_RADIO)
+ * PDPAR[4] = 1 [0x0800] -> GPIO: (CLK4)
+ */
+ clrsetbits_be16(&iop->iop_pdpar, 0x0A8D, 0x0880);
+
+ /* Port E (MPC885 Reference Manual - 34.6) */
+ /*
+ * In/Out or per. Function 0/1
+ * PEDIR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+ * PEDIR[29] = 1 [0x00000004] -> GPIO: (USB_SPEED)
+ * PEDIR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
+ * PEDIR[25] = 0 [0x00000040] -> GPIO: (RXD4)
+ * PEDIR[24] = 0 [0x00000080] -> GPIO: (BRG01)
+ * PEDIR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
+ * PEDIR[17] = 0 [0x00004000] -> GPIO: (CLK5)
+ */
+ clrsetbits_be32(&cp->cp_pedir, 0x000048CD, 0x0000000C);
+
+ /*
+ * open drain or active output
+ * PEODR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+ * PEODR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+ * PEODR[28] = 1 [0x00000008] -> GPIO: (USB_SUSPEND)
+ * PEODR[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
+ * PEODR[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
+ * PEODR[25] = 0 [0x00000040] -> GPIO: (RXD4)
+ * PEODR[24] = 0 [0x00000080] -> GPIO: (BRG01)
+ * PEODR[23] = 0 [0x00000100] -> GPIO: (DONE_FPGA_RADIO)
+ * PEODR[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
+ * PEODR[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
+ * PEODR[20] = 0 [0x00000800] -> GPIO: (SMTXD2)
+ * PEODR[19] = 0 [0x00001000] -> GPIO: (R2_TXEN)
+ * PEODR[17] = 0 [0x00004000] -> GPIO: (CLK5)
+ * PEODR[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
+ */
+ clrsetbits_be32(&cp->cp_peodr, 0x0000DFFD, 0x00000008);
+
+ /*
+ * GPIO or per. Function
+ * PEPAR[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+ * PEPAR[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
+ * PEPAR[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+ * PEPAR[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
+ * PEPAR[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+ */
+ clrbits_be32(&cp->cp_pepar, 0x0000200F);
+
+ /*
+ * Special Option register
+ * PESO[31] = 0 [0x00000001] -> GPIO: (DONE_FPGA_FIRMWARE)
+ * PESO[30] = 0 [0x00000002] -> GPIO: (PROG_FPGA_FIRMWARE)
+ * PESO[29] = 0 [0x00000004] -> GPIO: (USB_SPEED)
+ * PESO[28] = 0 [0x00000008] -> GPIO: (USB_SUSPEND)
+ * PESO[27] = 0 [0x00000010] -> GPIO: (R2_RXER)
+ * PESO[26] = 0 [0x00000020] -> GPIO: (R2_CRS_DV)
+ * PESO[25] = 0 [0x00000040] -> GPIO: (RXD4)
+ * PESO[22] = 0 [0x00000200] -> GPIO: (R2_RXD1)
+ * PESO[21] = 0 [0x00000400] -> GPIO: (R2_RXD0)
+ * PESO[18] = 0 [0x00002000] -> GPIO: (PROG_FPGA_RADIO)
+ * PESO[17] = 0 [0x00004000] -> GPIO: (CLK5)
+ * PESO[16] = 0 [0x00008000] -> GPIO: (R2_REF_CLK)
+ */
+ clrbits_be32(&cp->cp_peso, 0x0000E67F);
+
+ /* Is a motherboard present ? */
+ if (in_be16(ADDR_CPLD_R_ETAT) & R_ETAT_PRES_BASE) {
+ /* Initialize signal PROG_FPGA_FIRMWARE */
+ out_be32(&cp->cp_pedat, 0x00000002);
+ out_be32(&cp->cp_peodr, 0x00000002);
+ out_be32(&cp->cp_pedir, 0x00000002);
+
+ /* Check if fpga firmware is loaded */
+ if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+ printf("Reloading FPGA firmware.\n");
+
+ /* Load fpga firmware */
+ /* Activate PROG_FPGA_FIRMWARE for 1 usec */
+ clrbits_be32(&cp->cp_pedat, 0x00000002);
+ udelay(1);
+ setbits_be32(&cp->cp_pedat, 0x00000002);
+
+ /* Wait 200 msec and check DONE_FPGA_FIRMWARE */
+ mdelay(200);
+ if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+ for (;;) {
+ printf("error loading firmware.\n");
+ mdelay(500);
+ }
+ }
+
+ /* Send a reset signal and wait for 20 msec */
+ clrbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
+ mdelay(20);
+ setbits_be16(ADDR_CPLD_R_RESET, R_RST_STATUS);
+ }
+
+ /* Wait 300 msec and check the reset state */
+ mdelay(300);
+ if (!(in_be16(ADDR_CPLD_R_RESET) & R_RESET_STATUS)) {
+ for (;;) {
+ printf("Could not reset FPGA.\n");
+ mdelay(500);
+ }
+ }
+
+ /* is FPGA firmware loaded ? */
+ if (!(in_be32(&cp->cp_pedat) & 0x00000001)) {
+ printf("Reloading FPGA firmware\n");
+
+ /* Load FPGA firmware */
+ /* Activate PROG_FPGA_FIRMWARE for 1 usec */
+ clrbits_be32(&cp->cp_pedat, 0x00000002);
+ udelay(1);
+ setbits_be32(&cp->cp_pedat, 0x00000002);
+
+ /* Wait 200ms before checking DONE_FPGA_FIRMWARE */
+ mdelay(200);
+ }
+
+ /* Identify the type of mother board */
+ switch (in_8(ADDR_FPGA_R_BASE)) {
+ case TYPE_MCR:
+ iop_setup_mcr();
+ break;
+
+ default:
+ break;
+ }
+ /* CMPC885 board alone */
+ } else {
+ iop_setup_cmpc885();
+ }
+
+ return 0;
+}
diff --git a/board/cssi/cmpc885/cmpc885.env b/board/cssi/cmpc885/cmpc885.env
new file mode 100644
index 0000000000..51ab5ce2cf
--- /dev/null
+++ b/board/cssi/cmpc885/cmpc885.env
@@ -0,0 +1,7 @@
+loadaddr=0x1a00000
+filename=cmpc885.itb
+console_args=console=ttyCPM0,115200N8
+loadkernel=ubi part nand0;ubifsmount ubi0;ubifsload ${loadaddr} /boot/${filename};ubifsumount; ubi detach
+flashboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ${ofl_args}; run loadkernel; bootm $loadaddr#$config
+tftpboot=setenv bootargs ${console_args} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off ${ofl_args}; tftp ${loadaddr} ${filename};bootm $loadaddr#$config
+update=echo 'Updating ubi image'; if tftp $loadaddr $ubifile; then nand erase.chip; nand write $loadaddr 0x00 $filesize; fi;
diff --git a/board/cssi/cmpc885/nand.c b/board/cssi/cmpc885/nand.c
new file mode 100644
index 0000000000..38100046df
--- /dev/null
+++ b/board/cssi/cmpc885/nand.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Florent Trinh Thai <florent.trinh-thai@c-s.fr>
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ * Charles Frey <charles.frey@c-s.fr>
+ */
+
+#include <config.h>
+#include <common.h>
+#include <nand.h>
+#include <linux/bitops.h>
+#include <linux/mtd/rawnand.h>
+#include <asm/io.h>
+
+#define BIT_CLE BIT(3)
+#define BIT_ALE BIT(2)
+#define BIT_NCE BIT(0)
+
+static u32 nand_mask(unsigned int ctrl)
+{
+ return ((ctrl & NAND_CLE) ? BIT_CLE : 0) |
+ ((ctrl & NAND_ALE) ? BIT_ALE : 0) |
+ (!(ctrl & NAND_NCE) ? BIT_NCE : 0);
+}
+
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
+{
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ struct nand_chip *chip = mtd_to_nand(mtdinfo);
+
+ if (ctrl & NAND_CTRL_CHANGE)
+ clrsetbits_be16(&immr->im_ioport.iop_pddat,
+ BIT_CLE | BIT_ALE | BIT_NCE, nand_mask(ctrl));
+
+ if (cmd != NAND_CMD_NONE)
+ out_8(chip->IO_ADDR_W, cmd);
+}
+
+int board_nand_init(struct nand_chip *chip)
+{
+ chip->chip_delay = 60;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->cmd_ctrl = nand_hwcontrol;
+
+ return 0;
+}
diff --git a/board/cssi/cmpc885/sdram.c b/board/cssi/cmpc885/sdram.c
new file mode 100644
index 0000000000..7349b85ed2
--- /dev/null
+++ b/board/cssi/cmpc885/sdram.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 CS Group
+ * Charles Frey <charles.frey@c-s.fr>
+ */
+
+#include <common.h>
+#include <linux/sizes.h>
+#include <linux/delay.h>
+#include <init.h>
+#include <asm/io.h>
+#include <mpc8xx.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ADDR_CPLD_R_TYPE ((unsigned char __iomem *)CONFIG_CPLD_BASE + 3)
+
+#define _NOT_USED_ 0xFFFFEC04
+
+static const uint sdram_table[] = {
+ /* DRAM - single read. (offset 0 in upm RAM) */
+ 0x0F0CEC04, 0x0FFFEC04, 0x00AF2C04, 0x0FFFEC00,
+ 0x0FFCE004, 0xFFFFEC05, _NOT_USED_, _NOT_USED_,
+
+ /* DRAM - burst read. (offset 8 in upm RAM) */
+ 0x0F0CEC04, 0x0FFFEC04, 0x00AF2C04, 0x00FFEC00,
+ 0x00FFEC00, 0x00FFEC00, 0x0FFCE000, 0x1FFFEC05,
+
+ /* DRAM - Precharge all banks. (offset 16 in upm RAM) */
+ _NOT_USED_, 0x0FFCE004, 0x1FFFEC05, _NOT_USED_,
+
+ /* DRAM - NOP. (offset 20 in upm RAM) */
+ 0x1FFFEC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* DRAM - single write. (offset 24 in upm RAM) */
+ 0x0F0CEC04, 0x0FFFEC00, 0x00AF2004, 0x0FFFEC04,
+ 0x0FFCE004, 0x0FFFEC04, 0xFFFFEC05, _NOT_USED_,
+
+ /* DRAM - burst write. (offset 32 in upm RAM) */
+ 0x0F0CEC04, 0x0FFFEC00, 0x00AF2000, 0x00FFEC00,
+ 0x00FFEC00, 0x00FFEC04, 0x0FFFEC04, 0x0FFCE004,
+ 0x1FFFEC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+
+ /* refresh (offset 48 in upm RAM) */
+ 0x0FFDE404, 0x0FFEAC04, 0x0FFD6C84, 0x0FFFEC04,
+ 0x0FFFEC04, 0x0FFFEC04, 0x0FFFEC04, 0x1FFFEC85,
+
+ /* init (offset 56 in upm RAM) */
+ 0x0FEEA874, 0x0FBD6474, 0x1FFFEC45, _NOT_USED_,
+
+ /* exception. (offset 60 in upm RAM) */
+ 0x0FFCE004, 0xFFFFEC05, _NOT_USED_, _NOT_USED_
+};
+
+/* SDRAM initialization */
+int dram_init(void)
+{
+ immap_t __iomem *immap = (immap_t __iomem *)CONFIG_SYS_IMMR;
+ memctl8xx_t __iomem *memctl = &immap->im_memctl;
+ u32 max_size, mamr;
+ u8 val;
+
+ printf("UPMA init for SDRAM (CAS latency 2), ");
+ printf("init address 0x%08x, size ", (int)dram_init);
+
+ /* Verify the SDRAM size of the board */
+ val = (in_8(ADDR_CPLD_R_TYPE) & 0x30) >> 4;
+
+ if (val == 0x03 || val == 0x00) {
+ max_size = 64 * SZ_1M; /* 64 Mo of SDRAM */
+ mamr = 0x20104000;
+ } else {
+ max_size = 128 * SZ_1M; /* 128 Mo of SDRAM */
+ mamr = 0x20206000;
+ }
+
+ /* Configure CS1 */
+ out_be32(&memctl->memc_or1,
+ ~(max_size - 1) | OR_CSNT_SAM | OR_ACS_DIV2);
+ out_be32(&memctl->memc_br1, CFG_SYS_SDRAM_BASE | BR_MS_UPMA | BR_V);
+
+ /* Configure UPMA for CS1 */
+ upmconfig(UPMA, (uint *)sdram_table, ARRAY_SIZE(sdram_table));
+
+ out_be16(&memctl->memc_mptpr, MPTPR_PTP_DIV32);
+ /* disable refresh */
+ out_be32(&memctl->memc_mamr, mamr);
+ udelay(100);
+
+ /* NOP to maintain DQM high */
+ out_be32(&memctl->memc_mcr, 0x80002114);
+ udelay(200);
+
+ out_be32(&memctl->memc_mcr, 0x80002111); /* PRECHARGE cmd */
+ out_be32(&memctl->memc_mcr, 0x80002830); /* AUTO REFRESH cmd */
+ out_be32(&memctl->memc_mar, 0x00000088);
+ out_be32(&memctl->memc_mcr, 0x80002138);
+
+ /* Enable refresh */
+ setbits_be32(&memctl->memc_mamr, MAMR_PTAE);
+
+ gd->ram_size = get_ram_size((long *)CFG_SYS_SDRAM_BASE, max_size);
+
+ return 0;
+}
diff --git a/board/cssi/cmpc885/u-boot.lds b/board/cssi/cmpc885/u-boot.lds
new file mode 100644
index 0000000000..53f616fcfe
--- /dev/null
+++ b/board/cssi/cmpc885/u-boot.lds
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2010-2020 CS Group
+ * Christophe Leroy <christophe.leroy@c-s.fr>
+ *
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by Yuli Barcohen <yuli@arabellasw.com>
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .text :
+ {
+ arch/powerpc/cpu/mpc8xx/start.o (.text)
+ arch/powerpc/cpu/mpc8xx/traps.o (.text*)
+ arch/powerpc/lib/built-in.o (.text*)
+ drivers/net/built-in.o (.text*)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ env/embedded.o (.text.environment)
+
+ *(.text)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ KEEP(*(.got))
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+
+ . = ALIGN(4);
+ __u_boot_list : {
+ KEEP(*(SORT(__u_boot_list*)));
+ }
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ /*
+ * _end - This is end of u-boot.bin image.
+ * dtb will be appended here to make u-boot-dtb.bin
+ */
+ _end = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.bss*)
+ *(.sbss*)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ __bss_end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/configs/CMPC885_defconfig b/configs/CMPC885_defconfig
new file mode 100644
index 0000000000..7dff6ff270
--- /dev/null
+++ b/configs/CMPC885_defconfig
@@ -0,0 +1,110 @@
+CONFIG_PPC=y
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x2000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="cmpc885"
+CONFIG_SYS_PROMPT="S3K> "
+CONFIG_ENV_ADDR=0x40004000
+CONFIG_MPC8xx=y
+CONFIG_TARGET_CMPC885=y
+CONFIG_MPC885=y
+CONFIG_8xx_GCLK_FREQ=132000000
+CONFIG_CMD_IMMAP=y
+CONFIG_SYS_SIUMCR=0x00620000
+CONFIG_SYS_SYPCR=0xFFFFFF8F
+CONFIG_SYS_TBSCR=0x00C3
+CONFIG_SYS_PISCR=0x0000
+CONFIG_SYS_PLPRCR_BOOL=y
+CONFIG_SYS_PLPRCR=0x374d4000
+CONFIG_SYS_SCCR=0x00420000
+CONFIG_SYS_SCCR_MASK=0x00000000
+CONFIG_SYS_DER=0x2002000F
+CONFIG_SYS_MONITOR_LEN=327680
+CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=5
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="\nEnter password - autoboot in %d sec...\n"
+CONFIG_AUTOBOOT_DELAY_STR="root"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run flashboot"
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_SYS_BOOTM_LEN=0x2000000
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MTD=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_DHCP=y
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_MII=y
+CONFIG_MII_INIT=y
+CONFIG_CMD_PING=y
+# CONFIG_CMD_SLEEP is not set
+CONFIG_CMD_MTDPARTS=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_USE_IPADDR=y
+CONFIG_IPADDR="192.168.0.3"
+CONFIG_USE_NETMASK=y
+CONFIG_NETMASK="255.255.255.0"
+CONFIG_USE_SERVERIP=y
+CONFIG_SERVERIP="192.168.0.1"
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_SYS_BR0_PRELIM_BOOL=y
+CONFIG_SYS_BR0_PRELIM=0x40000801
+CONFIG_SYS_OR0_PRELIM=0xFFC00924
+CONFIG_SYS_BR1_PRELIM_BOOL=y
+CONFIG_SYS_BR1_PRELIM=0x00000081
+CONFIG_SYS_OR1_PRELIM=0xFC000E00
+CONFIG_SYS_BR2_PRELIM_BOOL=y
+CONFIG_SYS_BR2_PRELIM=0xC0000401
+CONFIG_SYS_OR2_PRELIM=0xFFFF8142
+CONFIG_SYS_BR3_PRELIM_BOOL=y
+CONFIG_SYS_BR3_PRELIM=0xE0000801
+CONFIG_SYS_OR3_PRELIM=0xFF00010A
+CONFIG_SYS_BR4_PRELIM_BOOL=y
+CONFIG_SYS_BR4_PRELIM=0xD0000801
+CONFIG_SYS_OR4_PRELIM=0xFC000D08
+CONFIG_SYS_BR5_PRELIM_BOOL=y
+CONFIG_SYS_BR5_PRELIM=0xC8000801
+CONFIG_SYS_OR5_PRELIM=0xFFFF8D10
+CONFIG_SYS_BR6_PRELIM_BOOL=y
+CONFIG_SYS_BR6_PRELIM=0x80000801
+CONFIG_SYS_OR6_PRELIM=0xFFFF8908
+CONFIG_SYS_BR7_PRELIM_BOOL=y
+CONFIG_SYS_BR7_PRELIM=0xF0000001
+CONFIG_SYS_OR7_PRELIM=0xFFFF810A
+CONFIG_MPC8XX_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_SYS_MAX_FLASH_SECT=71
+CONFIG_MTD_RAW_NAND=y
+CONFIG_RMII=y
+CONFIG_MPC8XX_FEC=y
+CONFIG_FEC1_PHY=1
+CONFIG_FEC2_PHY=2
+# CONFIG_PCI is not set
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_MPC8XX_SPI=y
+CONFIG_WDT=y
+# CONFIG_REGEX is not set
+CONFIG_LZMA=y
diff --git a/include/configs/cmpc885.h b/include/configs/cmpc885.h
new file mode 100644
index 0000000000..4ce580cd14
--- /dev/null
+++ b/include/configs/cmpc885.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2022 CS Group
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Definitions for initial stack pointer and data area (in DPRAM) */
+#define CFG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
+#define CFG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
+
+/* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */
+#define CFG_SYS_SDRAM_BASE 0x00000000
+
+/* FLASH Configuration */
+#define CFG_SYS_FLASH_BASE 0x40000000
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 24 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_SYS_BOOTMAPSZ (32 << 20)
+
+/* NAND configuration part */
+#define CFG_SYS_NAND_BASE 0xC0000000
+
+#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-02 14:12:54 +0000