summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/exynos/clock.c272
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c74
-rw-r--r--arch/arm/dts/exynos5250.dtsi154
-rw-r--r--arch/arm/include/asm/arch-exynos/clk.h1
-rw-r--r--arch/arm/include/asm/arch-exynos/clock.h276
-rw-r--r--arch/arm/include/asm/arch-exynos/cpu.h48
-rw-r--r--arch/arm/include/asm/arch-exynos/dp_info.h2
-rw-r--r--arch/arm/include/asm/arch-exynos/gpio.h85
-rw-r--r--arch/arm/include/asm/arch-exynos/mipi_dsim.h7
-rw-r--r--arch/arm/include/asm/arch-exynos/periph.h33
-rw-r--r--arch/arm/include/asm/arch-exynos/pinmux.h8
-rw-r--r--arch/arm/include/asm/arch-exynos/sromc.h18
-rw-r--r--board/samsung/dts/exynos5250-smdk5250.dts69
-rw-r--r--board/samsung/smdk5250/smdk5250.c237
-rw-r--r--board/samsung/trats/trats.c2
-rw-r--r--common/cmd_sound.c2
-rw-r--r--doc/device-tree-bindings/exynos/isp-spi.txt22
-rw-r--r--doc/device-tree-bindings/exynos/sound.txt27
-rw-r--r--drivers/i2c/s3c24x0_i2c.c85
-rw-r--r--drivers/i2c/s3c24x0_i2c.h7
-rw-r--r--drivers/power/pmic/pmic_max77686.c37
-rw-r--r--drivers/sound/sound.c171
-rw-r--r--drivers/sound/wm8994.c74
-rw-r--r--drivers/sound/wm8994.h6
-rw-r--r--drivers/spi/exynos_spi.c96
-rw-r--r--drivers/usb/host/ehci-exynos.c92
-rw-r--r--drivers/video/exynos_dp.c2
-rw-r--r--drivers/video/exynos_fb.c7
-rw-r--r--drivers/video/exynos_fimd.c12
-rw-r--r--include/configs/exynos5250-dt.h321
-rw-r--r--include/configs/smdk5250.h278
-rw-r--r--include/configs/trats.h45
-rw-r--r--include/fdtdec.h9
-rw-r--r--include/i2c.h26
-rw-r--r--include/sound.h4
-rw-r--r--lib/fdtdec.c9
36 files changed, 2170 insertions, 448 deletions
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 74599798c4..956427c9eb 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -112,6 +112,36 @@ static unsigned long exynos4_get_pll_clk(int pllreg)
return exynos_get_pll_clk(pllreg, r, k);
}
+/* exynos4x12: return pll clock frequency */
+static unsigned long exynos4x12_get_pll_clk(int pllreg)
+{
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+ unsigned long r, k = 0;
+
+ switch (pllreg) {
+ case APLL:
+ r = readl(&clk->apll_con0);
+ break;
+ case MPLL:
+ r = readl(&clk->mpll_con0);
+ break;
+ case EPLL:
+ r = readl(&clk->epll_con0);
+ k = readl(&clk->epll_con1);
+ break;
+ case VPLL:
+ r = readl(&clk->vpll_con0);
+ k = readl(&clk->vpll_con1);
+ break;
+ default:
+ printf("Unsupported PLL (%d)\n", pllreg);
+ return 0;
+ }
+
+ return exynos_get_pll_clk(pllreg, r, k);
+}
+
/* exynos5: return pll clock frequency */
static unsigned long exynos5_get_pll_clk(int pllreg)
{
@@ -193,6 +223,28 @@ static unsigned long exynos4_get_arm_clk(void)
return armclk;
}
+/* exynos4x12: return ARM clock frequency */
+static unsigned long exynos4x12_get_arm_clk(void)
+{
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+ unsigned long div;
+ unsigned long armclk;
+ unsigned int core_ratio;
+ unsigned int core2_ratio;
+
+ div = readl(&clk->div_cpu0);
+
+ /* CORE_RATIO: [2:0], CORE2_RATIO: [30:28] */
+ core_ratio = (div >> 0) & 0x7;
+ core2_ratio = (div >> 28) & 0x7;
+
+ armclk = get_pll_clk(APLL) / (core_ratio + 1);
+ armclk /= (core2_ratio + 1);
+
+ return armclk;
+}
+
/* exynos5: return ARM clock frequency */
static unsigned long exynos5_get_arm_clk(void)
{
@@ -258,6 +310,20 @@ static unsigned long exynos4_get_pwm_clk(void)
return pclk;
}
+/* exynos4x12: return pwm clock frequency */
+static unsigned long exynos4x12_get_pwm_clk(void)
+{
+ unsigned long pclk, sclk;
+ unsigned int ratio;
+
+ sclk = get_pll_clk(MPLL);
+ ratio = 8;
+
+ pclk = sclk / (ratio + 1);
+
+ return pclk;
+}
+
/* exynos5: return pwm clock frequency */
static unsigned long exynos5_get_pwm_clk(void)
{
@@ -326,6 +392,51 @@ static unsigned long exynos4_get_uart_clk(int dev_index)
return uclk;
}
+/* exynos4x12: return uart clock frequency */
+static unsigned long exynos4x12_get_uart_clk(int dev_index)
+{
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+ unsigned long uclk, sclk;
+ unsigned int sel;
+ unsigned int ratio;
+
+ /*
+ * CLK_SRC_PERIL0
+ * UART0_SEL [3:0]
+ * UART1_SEL [7:4]
+ * UART2_SEL [8:11]
+ * UART3_SEL [12:15]
+ * UART4_SEL [16:19]
+ */
+ sel = readl(&clk->src_peril0);
+ sel = (sel >> (dev_index << 2)) & 0xf;
+
+ if (sel == 0x6)
+ sclk = get_pll_clk(MPLL);
+ else if (sel == 0x7)
+ sclk = get_pll_clk(EPLL);
+ else if (sel == 0x8)
+ sclk = get_pll_clk(VPLL);
+ else
+ return 0;
+
+ /*
+ * CLK_DIV_PERIL0
+ * UART0_RATIO [3:0]
+ * UART1_RATIO [7:4]
+ * UART2_RATIO [8:11]
+ * UART3_RATIO [12:15]
+ * UART4_RATIO [16:19]
+ */
+ ratio = readl(&clk->div_peril0);
+ ratio = (ratio >> (dev_index << 2)) & 0xf;
+
+ uclk = sclk / (ratio + 1);
+
+ return uclk;
+}
+
/* exynos5: return uart clock frequency */
static unsigned long exynos5_get_uart_clk(int dev_index)
{
@@ -373,6 +484,100 @@ static unsigned long exynos5_get_uart_clk(int dev_index)
return uclk;
}
+static unsigned long exynos4_get_mmc_clk(int dev_index)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ unsigned long uclk, sclk;
+ unsigned int sel, ratio, pre_ratio;
+ int shift;
+
+ sel = readl(&clk->src_fsys);
+ sel = (sel >> (dev_index << 2)) & 0xf;
+
+ if (sel == 0x6)
+ sclk = get_pll_clk(MPLL);
+ else if (sel == 0x7)
+ sclk = get_pll_clk(EPLL);
+ else if (sel == 0x8)
+ sclk = get_pll_clk(VPLL);
+ else
+ return 0;
+
+ switch (dev_index) {
+ case 0:
+ case 1:
+ ratio = readl(&clk->div_fsys1);
+ pre_ratio = readl(&clk->div_fsys1);
+ break;
+ case 2:
+ case 3:
+ ratio = readl(&clk->div_fsys2);
+ pre_ratio = readl(&clk->div_fsys2);
+ break;
+ case 4:
+ ratio = readl(&clk->div_fsys3);
+ pre_ratio = readl(&clk->div_fsys3);
+ break;
+ default:
+ return 0;
+ }
+
+ if (dev_index == 1 || dev_index == 3)
+ shift = 16;
+
+ ratio = (ratio >> shift) & 0xf;
+ pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
+ uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
+
+ return uclk;
+}
+
+static unsigned long exynos5_get_mmc_clk(int dev_index)
+{
+ struct exynos5_clock *clk =
+ (struct exynos5_clock *)samsung_get_base_clock();
+ unsigned long uclk, sclk;
+ unsigned int sel, ratio, pre_ratio;
+ int shift;
+
+ sel = readl(&clk->src_fsys);
+ sel = (sel >> (dev_index << 2)) & 0xf;
+
+ if (sel == 0x6)
+ sclk = get_pll_clk(MPLL);
+ else if (sel == 0x7)
+ sclk = get_pll_clk(EPLL);
+ else if (sel == 0x8)
+ sclk = get_pll_clk(VPLL);
+ else
+ return 0;
+
+ switch (dev_index) {
+ case 0:
+ case 1:
+ ratio = readl(&clk->div_fsys1);
+ pre_ratio = readl(&clk->div_fsys1);
+ break;
+ case 2:
+ case 3:
+ ratio = readl(&clk->div_fsys2);
+ pre_ratio = readl(&clk->div_fsys2);
+ break;
+ default:
+ return 0;
+ }
+
+ if (dev_index == 1 || dev_index == 3)
+ shift = 16;
+
+ ratio = (ratio >> shift) & 0xf;
+ pre_ratio = (pre_ratio >> (shift + 8)) & 0xff;
+ uclk = (sclk / (ratio + 1)) / (pre_ratio + 1);
+
+ return uclk;
+}
+
/* exynos4: set the mmc clock */
static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
{
@@ -386,6 +591,38 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
* MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
* CLK_DIV_FSYS2
* MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
+ * CLK_DIV_FSYS3
+ * MMC4_PRE_RATIO [15:8]
+ */
+ if (dev_index < 2) {
+ addr = (unsigned int)&clk->div_fsys1;
+ } else if (dev_index == 4) {
+ addr = (unsigned int)&clk->div_fsys3;
+ dev_index -= 4;
+ } else {
+ addr = (unsigned int)&clk->div_fsys2;
+ dev_index -= 2;
+ }
+
+ val = readl(addr);
+ val &= ~(0xff << ((dev_index << 4) + 8));
+ val |= (div & 0xff) << ((dev_index << 4) + 8);
+ writel(val, addr);
+}
+
+/* exynos4x12: set the mmc clock */
+static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
+{
+ struct exynos4x12_clock *clk =
+ (struct exynos4x12_clock *)samsung_get_base_clock();
+ unsigned int addr;
+ unsigned int val;
+
+ /*
+ * CLK_DIV_FSYS1
+ * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
+ * CLK_DIV_FSYS2
+ * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
*/
if (dev_index < 2) {
addr = (unsigned int)&clk->div_fsys1;
@@ -603,7 +840,7 @@ void exynos5_set_lcd_clk(void)
*/
cfg = readl(&clk->src_disp1_0);
cfg &= ~(0xf);
- cfg |= 0x8;
+ cfg |= 0x6;
writel(cfg, &clk->src_disp1_0);
/*
@@ -940,16 +1177,22 @@ unsigned long get_pll_clk(int pllreg)
{
if (cpu_is_exynos5())
return exynos5_get_pll_clk(pllreg);
- else
+ else {
+ if (proid_is_exynos4412())
+ return exynos4x12_get_pll_clk(pllreg);
return exynos4_get_pll_clk(pllreg);
+ }
}
unsigned long get_arm_clk(void)
{
if (cpu_is_exynos5())
return exynos5_get_arm_clk();
- else
+ else {
+ if (proid_is_exynos4412())
+ return exynos4x12_get_arm_clk();
return exynos4_get_arm_clk();
+ }
}
unsigned long get_i2c_clk(void)
@@ -968,24 +1211,41 @@ unsigned long get_pwm_clk(void)
{
if (cpu_is_exynos5())
return exynos5_get_pwm_clk();
- else
+ else {
+ if (proid_is_exynos4412())
+ return exynos4x12_get_pwm_clk();
return exynos4_get_pwm_clk();
+ }
}
unsigned long get_uart_clk(int dev_index)
{
if (cpu_is_exynos5())
return exynos5_get_uart_clk(dev_index);
- else
+ else {
+ if (proid_is_exynos4412())
+ return exynos4x12_get_uart_clk(dev_index);
return exynos4_get_uart_clk(dev_index);
+ }
+}
+
+unsigned long get_mmc_clk(int dev_index)
+{
+ if (cpu_is_exynos5())
+ return exynos5_get_mmc_clk(dev_index);
+ else
+ return exynos4_get_mmc_clk(dev_index);
}
void set_mmc_clk(int dev_index, unsigned int div)
{
if (cpu_is_exynos5())
exynos5_set_mmc_clk(dev_index, div);
- else
+ else {
+ if (proid_is_exynos4412())
+ exynos4x12_set_mmc_clk(dev_index, div);
exynos4_set_mmc_clk(dev_index, div);
+ }
}
unsigned long get_lcd_clk(void)
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 20a4b8414a..bd499b4761 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
+#include <fdtdec.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
@@ -370,6 +371,43 @@ static void exynos4_i2c_config(int peripheral, int flags)
}
}
+static int exynos4_mmc_config(int peripheral, int flags)
+{
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+ struct s5p_gpio_bank *bank, *bank_ext;
+ int i;
+
+ switch (peripheral) {
+ case PERIPH_ID_SDMMC0:
+ bank = &gpio2->k0;
+ bank_ext = &gpio2->k1;
+ break;
+ case PERIPH_ID_SDMMC2:
+ bank = &gpio2->k2;
+ bank_ext = &gpio2->k3;
+ break;
+ default:
+ return -1;
+ }
+ for (i = 0; i < 7; i++) {
+ if (i == 2)
+ continue;
+ s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
+ s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ }
+ if (flags & PINMUX_FLAG_8BIT_MODE) {
+ for (i = 3; i < 7; i++) {
+ s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
+ s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
+ s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+ }
+ }
+
+ return 0;
+}
+
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
@@ -383,6 +421,14 @@ static int exynos4_pinmux_config(int peripheral, int flags)
case PERIPH_ID_I2C7:
exynos4_i2c_config(peripheral, flags);
break;
+ case PERIPH_ID_SDMMC0:
+ case PERIPH_ID_SDMMC2:
+ return exynos4_mmc_config(peripheral, flags);
+ case PERIPH_ID_SDMMC1:
+ case PERIPH_ID_SDMMC3:
+ case PERIPH_ID_SDMMC4:
+ printf("SDMMC device %d not implemented\n", peripheral);
+ return -1;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
@@ -402,3 +448,31 @@ int exynos_pinmux_config(int peripheral, int flags)
return -1;
}
}
+
+#ifdef CONFIG_OF_CONTROL
+static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
+{
+ int err;
+ u32 cell[3];
+
+ err = fdtdec_get_int_array(blob, node, "interrupts", cell,
+ ARRAY_SIZE(cell));
+ if (err)
+ return PERIPH_ID_NONE;
+
+ /* check for invalid peripheral id */
+ if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0))
+ return cell[1];
+
+ debug(" invalid peripheral id\n");
+ return PERIPH_ID_NONE;
+}
+
+int pinmux_decode_periph_id(const void *blob, int node)
+{
+ if (cpu_is_exynos5())
+ return exynos5_pinmux_decode_periph_id(blob, node);
+ else
+ return PERIPH_ID_NONE;
+}
+#endif
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
new file mode 100644
index 0000000000..ed8c8dd606
--- /dev/null
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -0,0 +1,154 @@
+/*
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
+ * EXYNOS5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos5250";
+
+ sromc@12250000 {
+ compatible = "samsung,exynos-sromc";
+ reg = <0x12250000 0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c@12c60000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <0 56 0>;
+ };
+
+ i2c@12c70000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C70000 0x100>;
+ interrupts = <0 57 0>;
+ };
+
+ i2c@12c80000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C80000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c@12c90000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C90000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c@12ca0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CA0000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c@12cb0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CB0000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c@12cc0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CC0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c@12cd0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CD0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ sound@12d60000 {
+ compatible = "samsung,exynos-sound";
+ reg = <0x12d60000 0x20>;
+ };
+
+ spi@12d20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x12d20000 0x30>;
+ interrupts = <0 68 0>;
+ };
+
+ spi@12d30000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x12d30000 0x30>;
+ interrupts = <0 69 0>;
+ };
+
+ spi@12d40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x12d40000 0x30>;
+ clock-frequency = <50000000>;
+ interrupts = <0 70 0>;
+ };
+
+ spi@131a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x131a0000 0x30>;
+ interrupts = <0 129 0>;
+ };
+
+ spi@131b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x131b0000 0x30>;
+ interrupts = <0 130 0>;
+ };
+
+ ehci@12110000 {
+ compatible = "samsung,exynos-ehci";
+ reg = <0x12110000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ phy {
+ compatible = "samsung,exynos-usb-phy";
+ reg = <0x12130000 0x100>;
+ };
+ };
+
+};
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index cd12323509..1935b0b5b8 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -34,6 +34,7 @@ unsigned long get_arm_clk(void);
unsigned long get_i2c_clk(void);
unsigned long get_pwm_clk(void);
unsigned long get_uart_clk(int dev_index);
+unsigned long get_mmc_clk(int dev_index);
void set_mmc_clk(int dev_index, unsigned int div);
unsigned long get_lcd_clk(void);
void set_lcd_clk(void);
diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h
index ff6781aae4..9b56b4e51b 100644
--- a/arch/arm/include/asm/arch-exynos/clock.h
+++ b/arch/arm/include/asm/arch-exynos/clock.h
@@ -251,6 +251,282 @@ struct exynos4_clock {
unsigned int div_iem_l1;
};
+struct exynos4x12_clock {
+ unsigned char res1[0x4200];
+ unsigned int src_leftbus;
+ unsigned char res2[0x1fc];
+ unsigned int mux_stat_leftbus;
+ unsigned char res3[0xfc];
+ unsigned int div_leftbus;
+ unsigned char res4[0xfc];
+ unsigned int div_stat_leftbus;
+ unsigned char res5[0x1fc];
+ unsigned int gate_ip_leftbus;
+ unsigned char res6[0x12c];
+ unsigned int gate_ip_image;
+ unsigned char res7[0xcc];
+ unsigned int clkout_leftbus;
+ unsigned int clkout_leftbus_div_stat;
+ unsigned char res8[0x37f8];
+ unsigned int src_rightbus;
+ unsigned char res9[0x1fc];
+ unsigned int mux_stat_rightbus;
+ unsigned char res10[0xfc];
+ unsigned int div_rightbus;
+ unsigned char res11[0xfc];
+ unsigned int div_stat_rightbus;
+ unsigned char res12[0x1fc];
+ unsigned int gate_ip_rightbus;
+ unsigned char res13[0x15c];
+ unsigned int gate_ip_perir;
+ unsigned char res14[0x9c];
+ unsigned int clkout_rightbus;
+ unsigned int clkout_rightbus_div_stat;
+ unsigned char res15[0x3608];
+ unsigned int epll_lock;
+ unsigned char res16[0xc];
+ unsigned int vpll_lock;
+ unsigned char res17[0xec];
+ unsigned int epll_con0;
+ unsigned int epll_con1;
+ unsigned int epll_con2;
+ unsigned char res18[0x4];
+ unsigned int vpll_con0;
+ unsigned int vpll_con1;
+ unsigned int vpll_con2;
+ unsigned char res19[0xe4];
+ unsigned int src_top0;
+ unsigned int src_top1;
+ unsigned char res20[0x8];
+ unsigned int src_cam;
+ unsigned int src_tv;
+ unsigned int src_mfc;
+ unsigned int src_g3d;
+ unsigned char res21[0x4];
+ unsigned int src_lcd;
+ unsigned int src_isp;
+ unsigned int src_maudio;
+ unsigned int src_fsys;
+ unsigned char res22[0xc];
+ unsigned int src_peril0;
+ unsigned int src_peril1;
+ unsigned int src_cam1;
+ unsigned char res23[0xb4];
+ unsigned int src_mask_top;
+ unsigned char res24[0xc];
+ unsigned int src_mask_cam;
+ unsigned int src_mask_tv;
+ unsigned char res25[0xc];
+ unsigned int src_mask_lcd;
+ unsigned int src_mask_isp;
+ unsigned int src_mask_maudio;
+ unsigned int src_mask_fsys;
+ unsigned char res26[0xc];
+ unsigned int src_mask_peril0;
+ unsigned int src_mask_peril1;
+ unsigned char res27[0xb8];
+ unsigned int mux_stat_top0;
+ unsigned int mux_stat_top1;
+ unsigned char res28[0x10];
+ unsigned int mux_stat_mfc;
+ unsigned int mux_stat_g3d;
+ unsigned char res29[0x28];
+ unsigned int mux_stat_cam1;
+ unsigned char res30[0xb4];
+ unsigned int div_top;
+ unsigned char res31[0xc];
+ unsigned int div_cam;
+ unsigned int div_tv;
+ unsigned int div_mfc;
+ unsigned int div_g3d;
+ unsigned char res32[0x4];
+ unsigned int div_lcd;
+ unsigned int div_isp;
+ unsigned int div_maudio;
+ unsigned int div_fsys0;
+ unsigned int div_fsys1;
+ unsigned int div_fsys2;
+ unsigned int div_fsys3;
+ unsigned int div_peril0;
+ unsigned int div_peril1;
+ unsigned int div_peril2;
+ unsigned int div_peril3;
+ unsigned int div_peril4;
+ unsigned int div_peril5;
+ unsigned int div_cam1;
+ unsigned char res33[0x14];
+ unsigned int div2_ratio;
+ unsigned char res34[0x8c];
+ unsigned int div_stat_top;
+ unsigned char res35[0xc];
+ unsigned int div_stat_cam;
+ unsigned int div_stat_tv;
+ unsigned int div_stat_mfc;
+ unsigned int div_stat_g3d;
+ unsigned char res36[0x4];
+ unsigned int div_stat_lcd;
+ unsigned int div_stat_isp;
+ unsigned int div_stat_maudio;
+ unsigned int div_stat_fsys0;
+ unsigned int div_stat_fsys1;
+ unsigned int div_stat_fsys2;
+ unsigned int div_stat_fsys3;
+ unsigned int div_stat_peril0;
+ unsigned int div_stat_peril1;
+ unsigned int div_stat_peril2;
+ unsigned int div_stat_peril3;
+ unsigned int div_stat_peril4;
+ unsigned int div_stat_peril5;
+ unsigned int div_stat_cam1;
+ unsigned char res37[0x14];
+ unsigned int div2_stat;
+ unsigned char res38[0x29c];
+ unsigned int gate_ip_cam;
+ unsigned int gate_ip_tv;
+ unsigned int gate_ip_mfc;
+ unsigned int gate_ip_g3d;
+ unsigned char res39[0x4];
+ unsigned int gate_ip_lcd;
+ unsigned int gate_ip_isp;
+ unsigned char res40[0x4];
+ unsigned int gate_ip_fsys;
+ unsigned char res41[0x8];
+ unsigned int gate_ip_gps;
+ unsigned int gate_ip_peril;
+ unsigned char res42[0xc];
+ unsigned char res43[0x4];
+ unsigned char res44[0xc];
+ unsigned int gate_block;
+ unsigned char res45[0x8c];
+ unsigned int clkout_cmu_top;
+ unsigned int clkout_cmu_top_div_stat;
+ unsigned char res46[0x3600];
+ unsigned int mpll_lock;
+ unsigned char res47[0xfc];
+ unsigned int mpll_con0;
+ unsigned int mpll_con1;
+ unsigned char res48[0xf0];
+ unsigned int src_dmc;
+ unsigned char res49[0xfc];
+ unsigned int src_mask_dmc;
+ unsigned char res50[0xfc];
+ unsigned int mux_stat_dmc;
+ unsigned char res51[0xfc];
+ unsigned int div_dmc0;
+ unsigned int div_dmc1;
+ unsigned char res52[0xf8];
+ unsigned int div_stat_dmc0;
+ unsigned int div_stat_dmc1;
+ unsigned char res53[0xf8];
+ unsigned int gate_bus_dmc0;
+ unsigned int gate_bus_dmc1;
+ unsigned char res54[0x1f8];
+ unsigned int gate_ip_dmc0;
+ unsigned int gate_ip_dmc1;
+ unsigned char res55[0xf8];
+ unsigned int clkout_cmu_dmc;
+ unsigned int clkout_cmu_dmc_div_stat;
+ unsigned char res56[0x5f8];
+ unsigned int dcgidx_map0;
+ unsigned int dcgidx_map1;
+ unsigned int dcgidx_map2;
+ unsigned char res57[0x14];
+ unsigned int dcgperf_map0;
+ unsigned int dcgperf_map1;
+ unsigned char res58[0x18];
+ unsigned int dvcidx_map;
+ unsigned char res59[0x1c];
+ unsigned int freq_cpu;
+ unsigned int freq_dpm;
+ unsigned char res60[0x18];
+ unsigned int dvsemclk_en;
+ unsigned int maxperf;
+ unsigned char res61[0x8];
+ unsigned int dmc_freq_ctrl;
+ unsigned int dmc_pause_ctrl;
+ unsigned int dddrphy_lock_ctrl;
+ unsigned int c2c_state;
+ unsigned char res62[0x2f60];
+ unsigned int apll_lock;
+ unsigned char res63[0x8];
+ unsigned char res64[0xf4];
+ unsigned int apll_con0;
+ unsigned int apll_con1;
+ unsigned char res65[0xf8];
+ unsigned int src_cpu;
+ unsigned char res66[0x1fc];
+ unsigned int mux_stat_cpu;
+ unsigned char res67[0xfc];
+ unsigned int div_cpu0;
+ unsigned int div_cpu1;
+ unsigned char res68[0xf8];
+ unsigned int div_stat_cpu0;
+ unsigned int div_stat_cpu1;
+ unsigned char res69[0x2f8];
+ unsigned int clk_gate_ip_cpu;
+ unsigned char res70[0xfc];
+ unsigned int clkout_cmu_cpu;
+ unsigned int clkout_cmu_cpu_div_stat;
+ unsigned char res71[0x5f8];
+ unsigned int armclk_stopctrl;
+ unsigned int atclk_stopctrl;
+ unsigned char res72[0x10];
+ unsigned char res73[0x8];
+ unsigned int pwr_ctrl;
+ unsigned int pwr_ctrl2;
+ unsigned char res74[0xd8];
+ unsigned int apll_con0_l8;
+ unsigned int apll_con0_l7;
+ unsigned int apll_con0_l6;
+ unsigned int apll_con0_l5;
+ unsigned int apll_con0_l4;
+ unsigned int apll_con0_l3;
+ unsigned int apll_con0_l2;
+ unsigned int apll_con0_l1;
+ unsigned int iem_control;
+ unsigned char res75[0xdc];
+ unsigned int apll_con1_l8;
+ unsigned int apll_con1_l7;
+ unsigned int apll_con1_l6;
+ unsigned int apll_con1_l5;
+ unsigned int apll_con1_l4;
+ unsigned int apll_con1_l3;
+ unsigned int apll_con1_l2;
+ unsigned int apll_con1_l1;
+ unsigned char res76[0xe0];
+ unsigned int div_iem_l8;
+ unsigned int div_iem_l7;
+ unsigned int div_iem_l6;
+ unsigned int div_iem_l5;
+ unsigned int div_iem_l4;
+ unsigned int div_iem_l3;
+ unsigned int div_iem_l2;
+ unsigned int div_iem_l1;
+ unsigned char res77[0xe0];
+ unsigned int l2_status;
+ unsigned char res78[0xc];
+ unsigned int cpu_status;
+ unsigned char res79[0xc];
+ unsigned int ptm_status;
+ unsigned char res80[0x2edc];
+ unsigned int div_isp0;
+ unsigned int div_isp1;
+ unsigned char res81[0xf8];
+ unsigned int div_stat_isp0;
+ unsigned int div_stat_isp1;
+ unsigned char res82[0x3f8];
+ unsigned int gate_ip_isp0;
+ unsigned int gate_ip_isp1;
+ unsigned char res83[0x1f8];
+ unsigned int clkout_cmu_isp;
+ unsigned int clkout_cmu_ispd_div_stat;
+ unsigned char res84[0xf8];
+ unsigned int cmu_isp_spar0;
+ unsigned int cmu_isp_spar1;
+ unsigned int cmu_isp_spar2;
+ unsigned int cmu_isp_spar3;
+};
+
struct exynos5_clock {
unsigned int apll_lock;
unsigned char res1[0xfc];
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index f06af2eb85..eb34422353 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -27,7 +27,7 @@
#define EXYNOS_CPU_NAME "Exynos"
#define EXYNOS4_ADDR_BASE 0x10000000
-/* EXYNOS4 */
+/* EXYNOS4 Common*/
#define EXYNOS4_I2C_SPACING 0x10000
#define EXYNOS4_GPIO_PART3_BASE 0x03860000
@@ -63,7 +63,40 @@
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
-/* EXYNOS5 */
+/* EXYNOS4X12 */
+#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
+#define EXYNOS4X12_PRO_ID 0x10000000
+#define EXYNOS4X12_SYSREG_BASE 0x10010000
+#define EXYNOS4X12_POWER_BASE 0x10020000
+#define EXYNOS4X12_SWRESET 0x10020400
+#define EXYNOS4X12_USBPHY_CONTROL 0x10020704
+#define EXYNOS4X12_CLOCK_BASE 0x10030000
+#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
+#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
+#define EXYNOS4X12_DMC0_BASE 0x10600000
+#define EXYNOS4X12_DMC1_BASE 0x10610000
+#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
+#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000
+#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000
+#define EXYNOS4X12_FIMD_BASE 0x11C00000
+#define EXYNOS4X12_MIPI_DSIM_BASE 0x11C80000
+#define EXYNOS4X12_USBOTG_BASE 0x12480000
+#define EXYNOS4X12_MMC_BASE 0x12510000
+#define EXYNOS4X12_SROMC_BASE 0x12570000
+#define EXYNOS4X12_USB_HOST_EHCI_BASE 0x12580000
+#define EXYNOS4X12_USBPHY_BASE 0x125B0000
+#define EXYNOS4X12_UART_BASE 0x13800000
+#define EXYNOS4X12_I2C_BASE 0x13860000
+#define EXYNOS4X12_PWMTIMER_BASE 0x139D0000
+
+#define EXYNOS4X12_ADC_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_DP_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_MODEM_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_I2S_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
+
+/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
#define EXYNOS5_GPIO_PART4_BASE 0x03860000
@@ -154,17 +187,20 @@ static inline int proid_is_##type(void) \
}
IS_EXYNOS_TYPE(exynos4210, 0x4210)
+IS_EXYNOS_TYPE(exynos4412, 0x4412)
IS_EXYNOS_TYPE(exynos5250, 0x5250)
#define SAMSUNG_BASE(device, base) \
static inline unsigned int samsung_get_base_##device(void) \
{ \
- if (cpu_is_exynos4()) \
+ if (cpu_is_exynos4()) { \
+ if (proid_is_exynos4412()) \
+ return EXYNOS4X12_##base; \
return EXYNOS4_##base; \
- else if (cpu_is_exynos5()) \
+ } else if (cpu_is_exynos5()) { \
return EXYNOS5_##base; \
- else \
- return 0; \
+ } \
+ return 0; \
}
SAMSUNG_BASE(adc, ADC_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h
index 35694980fa..102b709bd7 100644
--- a/arch/arm/include/asm/arch-exynos/dp_info.h
+++ b/arch/arm/include/asm/arch-exynos/dp_info.h
@@ -211,4 +211,6 @@ unsigned int exynos_init_dp(void)
}
#endif
+void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd);
+
#endif /* _DP_INFO_H */
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index 4db8fd640e..cfe10246c5 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -79,6 +79,67 @@ struct exynos4_gpio_part3 {
struct s5p_gpio_bank z;
};
+struct exynos4x12_gpio_part1 {
+ struct s5p_gpio_bank a0;
+ struct s5p_gpio_bank a1;
+ struct s5p_gpio_bank b;
+ struct s5p_gpio_bank c0;
+ struct s5p_gpio_bank c1;
+ struct s5p_gpio_bank d0;
+ struct s5p_gpio_bank d1;
+ struct s5p_gpio_bank res1[0x5];
+ struct s5p_gpio_bank f0;
+ struct s5p_gpio_bank f1;
+ struct s5p_gpio_bank f2;
+ struct s5p_gpio_bank f3;
+ struct s5p_gpio_bank res2[0x2];
+ struct s5p_gpio_bank j0;
+ struct s5p_gpio_bank j1;
+};
+
+struct exynos4x12_gpio_part2 {
+ struct s5p_gpio_bank res1[0x2];
+ struct s5p_gpio_bank k0;
+ struct s5p_gpio_bank k1;
+ struct s5p_gpio_bank k2;
+ struct s5p_gpio_bank k3;
+ struct s5p_gpio_bank l0;
+ struct s5p_gpio_bank l1;
+ struct s5p_gpio_bank l2;
+ struct s5p_gpio_bank y0;
+ struct s5p_gpio_bank y1;
+ struct s5p_gpio_bank y2;
+ struct s5p_gpio_bank y3;
+ struct s5p_gpio_bank y4;
+ struct s5p_gpio_bank y5;
+ struct s5p_gpio_bank y6;
+ struct s5p_gpio_bank res2[0x3];
+ struct s5p_gpio_bank m0;
+ struct s5p_gpio_bank m1;
+ struct s5p_gpio_bank m2;
+ struct s5p_gpio_bank m3;
+ struct s5p_gpio_bank m4;
+ struct s5p_gpio_bank res3[0x48];
+ struct s5p_gpio_bank x0;
+ struct s5p_gpio_bank x1;
+ struct s5p_gpio_bank x2;
+ struct s5p_gpio_bank x3;
+};
+
+struct exynos4x12_gpio_part3 {
+ struct s5p_gpio_bank z;
+};
+
+struct exynos4x12_gpio_part4 {
+ struct s5p_gpio_bank v0;
+ struct s5p_gpio_bank v1;
+ struct s5p_gpio_bank res1[0x1];
+ struct s5p_gpio_bank v2;
+ struct s5p_gpio_bank v3;
+ struct s5p_gpio_bank res2[0x1];
+ struct s5p_gpio_bank v4;
+};
+
struct exynos5_gpio_part1 {
struct s5p_gpio_bank a0;
struct s5p_gpio_bank a1;
@@ -163,6 +224,30 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
- EXYNOS4_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
* GPIO_PER_BANK) + pin) + EXYNOS4_GPIO_PART1_MAX)
+#define exynos4x12_gpio_part1_get_nr(bank, pin) \
+ ((((((unsigned int) &(((struct exynos4x12_gpio_part1 *) \
+ EXYNOS4X12_GPIO_PART1_BASE)->bank)) \
+ - EXYNOS4X12_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin)
+
+#define EXYNOS4X12_GPIO_PART1_MAX ((sizeof(struct exynos4x12_gpio_part1) \
+ / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define exynos4x12_gpio_part2_get_nr(bank, pin) \
+ (((((((unsigned int) &(((struct exynos4x12_gpio_part2 *) \
+ EXYNOS4X12_GPIO_PART2_BASE)->bank)) \
+ - EXYNOS4X12_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART1_MAX)
+
+#define EXYNOS4X12_GPIO_PART2_MAX ((sizeof(struct exynos4x12_gpio_part2) \
+ / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define exynos4x12_gpio_part3_get_nr(bank, pin) \
+ (((((((unsigned int) &(((struct exynos4x12_gpio_part3 *) \
+ EXYNOS4X12_GPIO_PART3_BASE)->bank)) \
+ - EXYNOS4X12_GPIO_PART3_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin) + EXYNOS4X12_GPIO_PART2_MAX)
+
#define exynos5_gpio_part1_get_nr(bank, pin) \
((((((unsigned int) &(((struct exynos5_gpio_part1 *) \
EXYNOS5_GPIO_PART1_BASE)->bank)) \
diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
index 9a7cbeb599..c1c9a3578a 100644
--- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h
+++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h
@@ -358,7 +358,14 @@ struct mipi_dsim_lcd_driver {
void (*mipi_display_on)(struct mipi_dsim_device *dsim_dev);
};
+#ifdef CONFIG_EXYNOS_MIPI_DSIM
int exynos_mipi_dsi_init(void);
+#else
+static inline int exynos_mipi_dsi_init(void)
+{
+ return 0;
+}
+#endif
/*
* register mipi_dsim_lcd_driver object defined by lcd panel driver
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 13abd2d703..89bcdfc0cc 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -25,12 +25,17 @@
#define __ASM_ARM_ARCH_PERIPH_H
/*
- * Peripherals requiring clock/pinmux configuration. List will
+ * Peripherals required for pinmux configuration. List will
* grow with support for more devices getting added.
+ * Numbering based on interrupt table.
*
*/
enum periph_id {
- PERIPH_ID_I2C0,
+ PERIPH_ID_UART0 = 51,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_I2C0 = 56,
PERIPH_ID_I2C1,
PERIPH_ID_I2C2,
PERIPH_ID_I2C3,
@@ -38,22 +43,24 @@ enum periph_id {
PERIPH_ID_I2C5,
PERIPH_ID_I2C6,
PERIPH_ID_I2C7,
- PERIPH_ID_I2S1,
- PERIPH_ID_SDMMC0,
+ PERIPH_ID_SPI0 = 68,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SDMMC0 = 75,
PERIPH_ID_SDMMC1,
PERIPH_ID_SDMMC2,
PERIPH_ID_SDMMC3,
- PERIPH_ID_SDMMC4,
- PERIPH_ID_SROMC,
- PERIPH_ID_SPI0,
- PERIPH_ID_SPI1,
- PERIPH_ID_SPI2,
+ PERIPH_ID_I2S1 = 99,
+
+ /* Since following peripherals do
+ * not have shared peripheral interrupts (SPIs)
+ * they are numbered arbitiraly after the maximum
+ * SPIs Exynos has (128)
+ */
+ PERIPH_ID_SROMC = 128,
PERIPH_ID_SPI3,
PERIPH_ID_SPI4,
- PERIPH_ID_UART0,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
+ PERIPH_ID_SDMMC4,
PERIPH_ID_COUNT,
PERIPH_ID_NONE = -1,
diff --git a/arch/arm/include/asm/arch-exynos/pinmux.h b/arch/arm/include/asm/arch-exynos/pinmux.h
index 10ea736c7d..014eebc75d 100644
--- a/arch/arm/include/asm/arch-exynos/pinmux.h
+++ b/arch/arm/include/asm/arch-exynos/pinmux.h
@@ -55,4 +55,12 @@ enum {
*/
int exynos_pinmux_config(int peripheral, int flags);
+/**
+ * Decode the peripheral id using the interrpt numbers.
+ *
+ * @param blob Device tree blob
+ * @param node FDT I2C node to find
+ * @return peripheral id if ok, PERIPH_ID_NONE on error
+ */
+int pinmux_decode_periph_id(const void *blob, int node);
#endif
diff --git a/arch/arm/include/asm/arch-exynos/sromc.h b/arch/arm/include/asm/arch-exynos/sromc.h
index f616bcb37b..dc6aae2c50 100644
--- a/arch/arm/include/asm/arch-exynos/sromc.h
+++ b/arch/arm/include/asm/arch-exynos/sromc.h
@@ -48,4 +48,22 @@ struct s5p_sromc {
/* Configure the Band Width and Bank Control Regs for required SROMC Bank */
void s5p_config_sromc(u32 srom_bank, u32 srom_bw_conf, u32 srom_bc_conf);
+enum {
+ FDT_SROM_PMC,
+ FDT_SROM_TACP,
+ FDT_SROM_TAH,
+ FDT_SROM_TCOH,
+ FDT_SROM_TACC,
+ FDT_SROM_TCOS,
+ FDT_SROM_TACS,
+
+ FDT_SROM_TIMING_COUNT,
+};
+
+struct fdt_sromc {
+ u8 bank; /* srom bank number */
+ u8 width; /* bus width in bytes */
+ unsigned int timing[FDT_SROM_TIMING_COUNT]; /* timing parameters */
+};
+
#endif /* __ASM_ARCH_SROMC_H_ */
diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000000..cbfab6f97f
--- /dev/null
+++ b/board/samsung/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,69 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+ aliases {
+ i2c0 = "/i2c@12c60000";
+ i2c1 = "/i2c@12c70000";
+ i2c2 = "/i2c@12c80000";
+ i2c3 = "/i2c@12c90000";
+ i2c4 = "/i2c@12ca0000";
+ i2c5 = "/i2c@12cb0000";
+ i2c6 = "/i2c@12cc0000";
+ i2c7 = "/i2c@12cd0000";
+ spi0 = "/spi@12d20000";
+ spi1 = "/spi@12d30000";
+ spi2 = "/spi@12d40000";
+ spi3 = "/spi@131a0000";
+ spi4 = "/spi@131b0000";
+ };
+
+ sromc@12250000 {
+ bank = <1>;
+ srom-timing = <1 9 12 1 6 1 1>;
+ width = <2>;
+ lan@5000000 {
+ compatible = "smsc,lan9215", "smsc,lan";
+ reg = <0x5000000 0x100>;
+ phy-mode = "mii";
+ };
+ };
+
+ sound@12d60000 {
+ samsung,i2s-epll-clock-frequency = <192000000>;
+ samsung,i2s-sampling-rate = <48000>;
+ samsung,i2s-bits-per-sample = <16>;
+ samsung,i2s-channels = <2>;
+ samsung,i2s-lr-clk-framesize = <256>;
+ samsung,i2s-bit-clk-framesize = <32>;
+ samsung,codec-type = "wm8994";
+ };
+
+ i2c@12c70000 {
+ soundcodec@1a {
+ reg = <0x1a>;
+ compatible = "wolfson,wm8994-codec";
+ };
+ };
+
+ i2c@12c60000 {
+ pmic@9 {
+ reg = <0x9>;
+ compatible = "maxim,max77686_pmic";
+ };
+ };
+};
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 9c926d6ecf..7a5f132ebb 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -21,43 +21,35 @@
*/
#include <common.h>
+#include <fdtdec.h>
#include <asm/io.h>
#include <i2c.h>
+#include <lcd.h>
#include <netdev.h>
#include <spi.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/power.h>
#include <asm/arch/sromc.h>
+#include <asm/arch/dp_info.h>
#include <power/pmic.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SMC911X
-static int smc9115_pre_init(void)
+#ifdef CONFIG_USB_EHCI_EXYNOS
+int board_usb_vbus_init(void)
{
- u32 smc_bw_conf, smc_bc_conf;
- int err;
-
- /* Ethernet needs data bus width of 16 bits */
- smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK)
- | SROMC_BYTE_ENABLE(CONFIG_ENV_SROM_BANK);
+ struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
+ samsung_get_base_gpio_part1();
- smc_bc_conf = SROMC_BC_TACS(0x01) | SROMC_BC_TCOS(0x01)
- | SROMC_BC_TACC(0x06) | SROMC_BC_TCOH(0x01)
- | SROMC_BC_TAH(0x0C) | SROMC_BC_TACP(0x09)
- | SROMC_BC_PMC(0x01);
+ /* Enable VBUS power switch */
+ s5p_gpio_direction_output(&gpio1->x2, 6, 1);
- /* Select and configure the SROMC bank */
- err = exynos_pinmux_config(PERIPH_ID_SROMC,
- CONFIG_ENV_SROM_BANK | PINMUX_FLAG_16BIT);
- if (err) {
- debug("SROMC not configured\n");
- return err;
- }
+ /* VBUS turn ON time */
+ mdelay(3);
- s5p_config_sromc(CONFIG_ENV_SROM_BANK, smc_bw_conf, smc_bc_conf);
return 0;
}
#endif
@@ -68,6 +60,9 @@ int board_init(void)
#ifdef CONFIG_EXYNOS_SPI
spi_init();
#endif
+#ifdef CONFIG_USB_EHCI_EXYNOS
+ board_usb_vbus_init();
+#endif
return 0;
}
@@ -122,12 +117,94 @@ void dram_init_banksize(void)
PHYS_SDRAM_8_SIZE);
}
+#ifdef CONFIG_OF_CONTROL
+static int decode_sromc(const void *blob, struct fdt_sromc *config)
+{
+ int err;
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SROMC);
+ if (node < 0) {
+ debug("Could not find SROMC node\n");
+ return node;
+ }
+
+ config->bank = fdtdec_get_int(blob, node, "bank", 0);
+ config->width = fdtdec_get_int(blob, node, "width", 2);
+
+ err = fdtdec_get_int_array(blob, node, "srom-timing", config->timing,
+ FDT_SROM_TIMING_COUNT);
+ if (err < 0) {
+ debug("Could not decode SROMC configuration\n");
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ return 0;
+}
+#endif
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_SMC911X
- if (smc9115_pre_init())
+ u32 smc_bw_conf, smc_bc_conf;
+ struct fdt_sromc config;
+ fdt_addr_t base_addr;
+ int node;
+
+#ifdef CONFIG_OF_CONTROL
+ node = decode_sromc(gd->fdt_blob, &config);
+ if (node < 0) {
+ debug("%s: Could not find sromc configuration\n", __func__);
+ return 0;
+ }
+ node = fdtdec_next_compatible(gd->fdt_blob, node, COMPAT_SMSC_LAN9215);
+ if (node < 0) {
+ debug("%s: Could not find lan9215 configuration\n", __func__);
+ return 0;
+ }
+
+ /* We now have a node, so any problems from now on are errors */
+ base_addr = fdtdec_get_addr(gd->fdt_blob, node, "reg");
+ if (base_addr == FDT_ADDR_T_NONE) {
+ debug("%s: Could not find lan9215 address\n", __func__);
+ return -1;
+ }
+#else
+ /* Non-FDT configuration - bank number and timing parameters*/
+ config.bank = CONFIG_ENV_SROM_BANK;
+ config.width = 2;
+
+ config.timing[FDT_SROM_TACS] = 0x01;
+ config.timing[FDT_SROM_TCOS] = 0x01;
+ config.timing[FDT_SROM_TACC] = 0x06;
+ config.timing[FDT_SROM_TCOH] = 0x01;
+ config.timing[FDT_SROM_TAH] = 0x0C;
+ config.timing[FDT_SROM_TACP] = 0x09;
+ config.timing[FDT_SROM_PMC] = 0x01;
+ base_addr = CONFIG_SMC911X_BASE;
+#endif
+
+ /* Ethernet needs data bus width of 16 bits */
+ if (config.width != 2) {
+ debug("%s: Unsupported bus width %d\n", __func__,
+ config.width);
return -1;
- return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+ }
+ smc_bw_conf = SROMC_DATA16_WIDTH(config.bank)
+ | SROMC_BYTE_ENABLE(config.bank);
+
+ smc_bc_conf = SROMC_BC_TACS(config.timing[FDT_SROM_TACS]) |\
+ SROMC_BC_TCOS(config.timing[FDT_SROM_TCOS]) |\
+ SROMC_BC_TACC(config.timing[FDT_SROM_TACC]) |\
+ SROMC_BC_TCOH(config.timing[FDT_SROM_TCOH]) |\
+ SROMC_BC_TAH(config.timing[FDT_SROM_TAH]) |\
+ SROMC_BC_TACP(config.timing[FDT_SROM_TACP]) |\
+ SROMC_BC_PMC(config.timing[FDT_SROM_PMC]);
+
+ /* Select and configure the SROMC bank */
+ exynos_pinmux_config(PERIPH_ID_SROMC, config.bank);
+ s5p_config_sromc(config.bank, smc_bw_conf, smc_bc_conf);
+ return smc911x_initialize(0, base_addr);
#endif
return 0;
}
@@ -188,24 +265,6 @@ static int board_uart_init(void)
return 0;
}
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
-static int board_i2c_init(void)
-{
- int i, err;
-
- for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
- err = exynos_pinmux_config((PERIPH_ID_I2C0 + i),
- PINMUX_FLAG_NONE);
- if (err) {
- debug("I2C%d not configured\n", (PERIPH_ID_I2C0 + i));
- return err;
- }
- }
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- return 0;
-}
-#endif
-
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
@@ -216,8 +275,104 @@ int board_early_init_f(void)
return err;
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
- err = board_i2c_init();
+ board_i2c_init(gd->fdt_blob);
#endif
return err;
}
#endif
+
+#ifdef CONFIG_LCD
+void cfg_lcd_gpio(void)
+{
+ struct exynos5_gpio_part1 *gpio1 =
+ (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
+
+ /* For Backlight */
+ s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->b2, 0, 1);
+
+ /* LCD power on */
+ s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
+ s5p_gpio_set_value(&gpio1->x1, 5, 1);
+
+ /* Set Hotplug detect for DP */
+ s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+}
+
+vidinfo_t panel_info = {
+ .vl_freq = 60,
+ .vl_col = 2560,
+ .vl_row = 1600,
+ .vl_width = 2560,
+ .vl_height = 1600,
+ .vl_clkp = CONFIG_SYS_LOW,
+ .vl_hsp = CONFIG_SYS_LOW,
+ .vl_vsp = CONFIG_SYS_LOW,
+ .vl_dp = CONFIG_SYS_LOW,
+ .vl_bpix = 4, /* LCD_BPP = 2^4, for output conosle on LCD */
+
+ /* wDP panel timing infomation */
+ .vl_hspw = 32,
+ .vl_hbpd = 80,
+ .vl_hfpd = 48,
+
+ .vl_vspw = 6,
+ .vl_vbpd = 37,
+ .vl_vfpd = 3,
+ .vl_cmd_allow_len = 0xf,
+
+ .win_id = 3,
+ .cfg_gpio = cfg_lcd_gpio,
+ .backlight_on = NULL,
+ .lcd_power_on = NULL,
+ .reset_lcd = NULL,
+ .dual_lcd_enabled = 0,
+
+ .init_delay = 0,
+ .power_on_delay = 0,
+ .reset_delay = 0,
+ .interface_mode = FIMD_RGB_INTERFACE,
+ .dp_enabled = 1,
+};
+
+static struct edp_device_info edp_info = {
+ .disp_info = {
+ .h_res = 2560,
+ .h_sync_width = 32,
+ .h_back_porch = 80,
+ .h_front_porch = 48,
+ .v_res = 1600,
+ .v_sync_width = 6,
+ .v_back_porch = 37,
+ .v_front_porch = 3,
+ .v_sync_rate = 60,
+ },
+ .lt_info = {
+ .lt_status = DP_LT_NONE,
+ },
+ .video_info = {
+ .master_mode = 0,
+ .bist_mode = DP_DISABLE,
+ .bist_pattern = NO_PATTERN,
+ .h_sync_polarity = 0,
+ .v_sync_polarity = 0,
+ .interlaced = 0,
+ .color_space = COLOR_RGB,
+ .dynamic_range = VESA,
+ .ycbcr_coeff = COLOR_YCBCR601,
+ .color_depth = COLOR_8,
+ },
+};
+
+static struct exynos_dp_platform_data dp_platform_data = {
+ .phy_enable = set_dp_phy_ctrl,
+ .edp_dev_info = &edp_info,
+};
+
+void init_panel_info(vidinfo_t *vid)
+{
+ vid->rgb_mode = MODE_RGB_P,
+
+ exynos_set_dp_platform_data(&dp_platform_data);
+}
+#endif
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 4724029424..88d193de28 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -67,7 +67,7 @@ struct s3c_plat_otg_data s5pc210_otg_data;
int board_init(void)
{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SPL_ARGS_ADDR;
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
diff --git a/common/cmd_sound.c b/common/cmd_sound.c
index 459d1ebaf2..cfca9dd136 100644
--- a/common/cmd_sound.c
+++ b/common/cmd_sound.c
@@ -33,7 +33,7 @@ static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
int ret;
- ret = sound_init();
+ ret = sound_init(gd->fdt_blob);
if (ret) {
printf("Initialise Audio driver failed\n");
return CMD_RET_FAILURE;
diff --git a/doc/device-tree-bindings/exynos/isp-spi.txt b/doc/device-tree-bindings/exynos/isp-spi.txt
new file mode 100644
index 0000000000..b8086e82b1
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/isp-spi.txt
@@ -0,0 +1,22 @@
+Exynos ISP SPI Subsystem
+
+The device node for ISP SPI subsytem.
+Since Peripheral id in EXYNOS is decoded based on Interrupts, currently
+ISP SPI have no individual interrupts hence we add ad dummy interrupt node
+which will have a value beyond the maximum number of interrupts exynos5 can
+support.
+
+Required properties :
+ - compatible : Should be "samsung,exynos-spi" for spi.
+ - reg : Base adrress of the the subsystem.
+ - interrupts : A value which is beyond the maximum number of interrupts
+exynos5 can support.
+
+Example:
+spi@131a0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,exynos-spi";
+ reg = <0x131a0000 0x30>;
+ interrupts = <0 129 0>;
+};
diff --git a/doc/device-tree-bindings/exynos/sound.txt b/doc/device-tree-bindings/exynos/sound.txt
new file mode 100644
index 0000000000..98d1798d0c
--- /dev/null
+++ b/doc/device-tree-bindings/exynos/sound.txt
@@ -0,0 +1,27 @@
+Exynos Sound Subsystem
+
+The device node for sound subsytem which contains codec and i2s block
+that is a part of Exynos5250
+
+Required properties :
+ - compatible : Should be "samsung,exynos-sound" for sound
+ - samsung,i2s-epll-clock-frequency : epll clock output frequency in Hz
+ - samsung,i2s-sampling-rate : sampling rate, default is 48000
+ - samsung,i2s-bits-per-sample : sample width, defalut is 16 bit
+ - samsung,i2s-channels : nummber of channels, default is 2
+ - samsung,i2s-lr-clk-framesize : lr clock frame size
+ - samsung,i2s-bit-clk-framesize : bit clock frame size
+ - samsung,codec-type : sound codec type
+
+Example:
+
+sound@12d60000 {
+ compatible = "samsung,exynos-sound"
+ samsung,i2s-epll-clock-frequency = <192000000>;
+ samsung,i2s-sampling-rate = <48000>;
+ samsung,i2s-bits-per-sample = <16>;
+ samsung,i2s-channels = <2>;
+ samsung,i2s-lr-clk-framesize = <256>;
+ samsung,i2s-bit-clk-framesize = <32>;
+ samsung,codec-type = "wm8994";
+};
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 90d297a284..769a2ba5ba 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -27,9 +27,11 @@
*/
#include <common.h>
+#include <fdtdec.h>
#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/pinmux.h>
#else
#include <asm/arch/s3c24x0_cpu.h>
#endif
@@ -60,7 +62,16 @@
#define I2C_TIMEOUT 1 /* 1 second */
-static unsigned int g_current_bus; /* Stores Current I2C Bus */
+/*
+ * For SPL boot some boards need i2c before SDRAM is initialised so force
+ * variables to live in SRAM
+ */
+static unsigned int g_current_bus __attribute__((section(".data")));
+#ifdef CONFIG_OF_CONTROL
+static int i2c_busses __attribute__((section(".data")));
+static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
+ __attribute__((section(".data")));
+#endif
#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5)
static int GetI2CSDA(void)
@@ -512,4 +523,76 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
(i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
len) != 0);
}
+
+#ifdef CONFIG_OF_CONTROL
+void board_i2c_init(const void *blob)
+{
+ int node_list[CONFIG_MAX_I2C_NUM];
+ int count, i;
+
+ count = fdtdec_find_aliases_for_id(blob, "i2c",
+ COMPAT_SAMSUNG_S3C2440_I2C, node_list,
+ CONFIG_MAX_I2C_NUM);
+
+ for (i = 0; i < count; i++) {
+ struct s3c24x0_i2c_bus *bus;
+ int node = node_list[i];
+
+ if (node <= 0)
+ continue;
+ bus = &i2c_bus[i];
+ bus->regs = (struct s3c24x0_i2c *)
+ fdtdec_get_addr(blob, node, "reg");
+ bus->id = pinmux_decode_periph_id(blob, node);
+ bus->node = node;
+ bus->bus_num = i2c_busses++;
+ exynos_pinmux_config(bus->id, 0);
+ }
+}
+
+static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
+{
+ if (bus_idx < i2c_busses)
+ return &i2c_bus[bus_idx];
+
+ debug("Undefined bus: %d\n", bus_idx);
+ return NULL;
+}
+
+int i2c_get_bus_num_fdt(int node)
+{
+ int i;
+
+ for (i = 0; i < i2c_busses; i++) {
+ if (node == i2c_bus[i].node)
+ return i;
+ }
+
+ debug("%s: Can't find any matched I2C bus\n", __func__);
+ return -1;
+}
+
+int i2c_reset_port_fdt(const void *blob, int node)
+{
+ struct s3c24x0_i2c_bus *i2c;
+ int bus;
+
+ bus = i2c_get_bus_num_fdt(node);
+ if (bus < 0) {
+ debug("could not get bus for node %d\n", node);
+ return -1;
+ }
+
+ i2c = get_bus(bus);
+ if (!i2c) {
+ debug("get_bus() failed for node node %d\n", node);
+ return -1;
+ }
+
+ i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ return 0;
+}
+#endif
+
#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/i2c/s3c24x0_i2c.h b/drivers/i2c/s3c24x0_i2c.h
index 2dd4b06a23..a56d749dec 100644
--- a/drivers/i2c/s3c24x0_i2c.h
+++ b/drivers/i2c/s3c24x0_i2c.h
@@ -30,4 +30,11 @@ struct s3c24x0_i2c {
u32 iicds;
u32 iiclc;
};
+
+struct s3c24x0_i2c_bus {
+ int node; /* device tree node */
+ int bus_num; /* i2c bus number */
+ struct s3c24x0_i2c *regs;
+ int id;
+};
#endif /* _S3C24X0_I2C_H */
diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c
index fce0183afd..7fcb4c0bea 100644
--- a/drivers/power/pmic/pmic_max77686.c
+++ b/drivers/power/pmic/pmic_max77686.c
@@ -22,10 +22,14 @@
*/
#include <common.h>
+#include <fdtdec.h>
+#include <i2c.h>
#include <power/pmic.h>
#include <power/max77686_pmic.h>
#include <errno.h>
+DECLARE_GLOBAL_DATA_PTR;
+
int pmic_init(unsigned char bus)
{
static const char name[] = "MAX77686_PMIC";
@@ -36,13 +40,40 @@ int pmic_init(unsigned char bus)
return -ENOMEM;
}
- puts("Board PMIC init\n");
+#ifdef CONFIG_OF_CONTROL
+ const void *blob = gd->fdt_blob;
+ int node, parent;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_MAX77686_PMIC);
+ if (node < 0) {
+ debug("PMIC: No node for PMIC Chip in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+
+ p->bus = i2c_get_bus_num_fdt(parent);
+ if (p->bus < 0) {
+ debug("%s: Cannot find I2C bus\n", __func__);
+ return -1;
+ }
+ p->hw.i2c.addr = fdtdec_get_int(blob, node, "reg", 9);
+#else
+ p->bus = bus;
+ p->hw.i2c.addr = MAX77686_I2C_ADDR;
+#endif
+
p->name = name;
p->interface = PMIC_I2C;
p->number_of_regs = PMIC_NUM_OF_REGS;
- p->hw.i2c.addr = MAX77686_I2C_ADDR;
p->hw.i2c.tx_num = 1;
- p->bus = bus;
+
+ puts("Board PMIC init\n");
return 0;
}
diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c
index 4c74534c95..fa8432d48a 100644
--- a/drivers/sound/sound.c
+++ b/drivers/sound/sound.c
@@ -24,111 +24,159 @@
#include <malloc.h>
#include <common.h>
#include <asm/io.h>
+#include <libfdt.h>
+#include <fdtdec.h>
#include <i2c.h>
#include <i2s.h>
#include <sound.h>
-#include "wm8994.h"
#include <asm/arch/sound.h>
+#include "wm8994.h"
/* defines */
#define SOUND_400_HZ 400
#define SOUND_BITS_IN_BYTE 8
static struct i2stx_info g_i2stx_pri;
-static struct sound_codec_info g_codec_info;
/*
- * get_sound_fdt_values gets fdt values for i2s parameters
+ * get_sound_i2s_values gets values for i2s parameters
*
* @param i2stx_info i2s transmitter transfer param structure
- * @param blob FDT blob
- */
-static void get_sound_i2s_values(struct i2stx_info *i2s)
-{
- i2s->base_address = samsung_get_base_i2s();
- i2s->audio_pll_clk = I2S_PLL_CLK;
- i2s->samplingrate = I2S_SAMPLING_RATE;
- i2s->bitspersample = I2S_BITS_PER_SAMPLE;
- i2s->channels = I2S_CHANNELS;
- i2s->rfs = I2S_RFS;
- i2s->bfs = I2S_BFS;
-}
-
-/*
- * Gets fdt values for wm8994 config parameters
- *
- * @param pcodec_info codec information structure
- * @param blob FDT blob
- * @return int value, 0 for success
+ * @param blob FDT blob if enabled else NULL
*/
-static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info)
+static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
{
+#ifdef CONFIG_OF_CONTROL
+ int node;
int error = 0;
+ int base;
- switch (AUDIO_COMPAT) {
- case AUDIO_COMPAT_SPI:
- debug("%s: Support not added for SPI interface\n", __func__);
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_SAMSUNG_EXYNOS5_SOUND);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
return -1;
- break;
- case AUDIO_COMPAT_I2C:
- pcodec_info->i2c_bus = AUDIO_I2C_BUS;
- pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
- debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
- break;
- default:
- debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT);
+ }
+
+ /*
+ * Get the pre-defined sound specific values from FDT.
+ * All of these are expected to be correct otherwise
+ * wrong register values in i2s setup parameters
+ * may result in no sound play.
+ */
+ base = fdtdec_get_addr(blob, node, "reg");
+ if (base == FDT_ADDR_T_NONE) {
+ debug("%s: Missing i2s base\n", __func__);
return -1;
}
+ i2s->base_address = base;
+ i2s->audio_pll_clk = fdtdec_get_int(blob,
+ node, "samsung,i2s-epll-clock-frequency", -1);
+ error |= i2s->audio_pll_clk;
+ debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
+ i2s->samplingrate = fdtdec_get_int(blob,
+ node, "samsung,i2s-sampling-rate", -1);
+ error |= i2s->samplingrate;
+ debug("samplingrate = %d\n", i2s->samplingrate);
+ i2s->bitspersample = fdtdec_get_int(blob,
+ node, "samsung,i2s-bits-per-sample", -1);
+ error |= i2s->bitspersample;
+ debug("bitspersample = %d\n", i2s->bitspersample);
+ i2s->channels = fdtdec_get_int(blob,
+ node, "samsung,i2s-channels", -1);
+ error |= i2s->channels;
+ debug("channels = %d\n", i2s->channels);
+ i2s->rfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-lr-clk-framesize", -1);
+ error |= i2s->rfs;
+ debug("rfs = %d\n", i2s->rfs);
+ i2s->bfs = fdtdec_get_int(blob,
+ node, "samsung,i2s-bit-clk-framesize", -1);
+ error |= i2s->bfs;
+ debug("bfs = %d\n", i2s->bfs);
if (error == -1) {
- debug("fail to get wm8994 codec node properties\n");
+ debug("fail to get sound i2s node properties\n");
return -1;
}
-
+#else
+ i2s->base_address = samsung_get_base_i2s();
+ i2s->audio_pll_clk = I2S_PLL_CLK;
+ i2s->samplingrate = I2S_SAMPLING_RATE;
+ i2s->bitspersample = I2S_BITS_PER_SAMPLE;
+ i2s->channels = I2S_CHANNELS;
+ i2s->rfs = I2S_RFS;
+ i2s->bfs = I2S_BFS;
+#endif
return 0;
}
/*
- * Gets fdt values for codec config parameters
+ * Init codec
*
- * @param pcodec_info codec information structure
- * @param blob FDT blob
- * @return int value, 0 for success
+ * @param blob FDT blob
+ * @param pi2s_tx i2s parameters required by codec
+ * @return int value, 0 for success
*/
-static int get_sound_codec_values(struct sound_codec_info *pcodec_info)
+static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
{
- int error = 0;
+ int ret;
const char *codectype;
+#ifdef CONFIG_OF_CONTROL
+ int node;
- codectype = AUDIO_CODEC;
+ /* Get the node from FDT for sound */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS5_SOUND);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for sound in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+ /*
+ * Get the pre-defined sound codec specific values from FDT.
+ * All of these are expected to be correct otherwise sound
+ * can not be played
+ */
+ codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
+ debug("device = %s\n", codectype);
+#else
+ codectype = AUDIO_CODEC;
+#endif
if (!strcmp(codectype, "wm8994")) {
- pcodec_info->codec_type = CODEC_WM_8994;
- error = get_sound_wm8994_values(pcodec_info);
+ /* Check the codec type and initialise the same */
+ ret = wm8994_init(blob, WM8994_AIF2,
+ pi2s_tx->samplingrate,
+ (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+ pi2s_tx->bitspersample, pi2s_tx->channels);
} else {
- error = -1;
+ debug("%s: Unknown code type %s\n", __func__,
+ codectype);
+ return -1;
}
-
- if (error == -1) {
- debug("fail to get sound codec node properties\n");
+ if (ret) {
+ debug("%s: Codec init failed\n", __func__);
return -1;
}
return 0;
}
-int sound_init(void)
+int sound_init(const void *blob)
{
int ret;
struct i2stx_info *pi2s_tx = &g_i2stx_pri;
- struct sound_codec_info *pcodec_info = &g_codec_info;
/* Get the I2S Values */
- get_sound_i2s_values(pi2s_tx);
+ if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
+ debug(" FDT I2S values failed\n");
+ return -1;
+ }
- /* Get the codec Values */
- if (get_sound_codec_values(pcodec_info) < 0)
+ if (codec_init(blob, pi2s_tx) < 0) {
+ debug(" Codec init failed\n");
return -1;
+ }
ret = i2s_tx_init(pi2s_tx);
if (ret) {
@@ -137,21 +185,6 @@ int sound_init(void)
return ret;
}
- /* Check the codec type and initialise the same */
- if (pcodec_info->codec_type == CODEC_WM_8994) {
- ret = wm8994_init(pcodec_info, WM8994_AIF2,
- pi2s_tx->samplingrate,
- (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
- pi2s_tx->bitspersample, pi2s_tx->channels);
- } else {
- debug("%s: Unknown code type %d\n", __func__,
- pcodec_info->codec_type);
- return -1;
- }
- if (ret) {
- debug("%s: Codec init failed\n", __func__);
- return -1;
- }
return ret;
}
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
index 293903ada2..3b673b455a 100644
--- a/drivers/sound/wm8994.c
+++ b/drivers/sound/wm8994.c
@@ -26,9 +26,11 @@
#include <asm/io.h>
#include <common.h>
#include <div64.h>
+#include <fdtdec.h>
#include <i2c.h>
#include <i2s.h>
#include <sound.h>
+#include <asm/arch/sound.h>
#include "wm8994.h"
#include "wm8994_registers.h"
@@ -77,6 +79,7 @@ static int bclk_divs[] = {
static struct wm8994_priv g_wm8994_info;
static unsigned char g_wm8994_i2c_dev_addr;
+static struct sound_codec_info g_codec_info;
/*
* Initialise I2C for wm 8994
@@ -747,13 +750,80 @@ err:
return -1;
}
+/*
+ * Gets fdt values for wm8994 config parameters
+ *
+ * @param pcodec_info codec information structure
+ * @param blob FDT blob
+ * @return int value, 0 for success
+ */
+static int get_codec_values(struct sound_codec_info *pcodec_info,
+ const void *blob)
+{
+ int error = 0;
+#ifdef CONFIG_OF_CONTROL
+ enum fdt_compat_id compat;
+ int node;
+ int parent;
+
+ /* Get the node from FDT for codec */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC);
+ if (node <= 0) {
+ debug("EXYNOS_SOUND: No node for codec in device tree\n");
+ debug("node = %d\n", node);
+ return -1;
+ }
+
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+
+ compat = fdtdec_lookup(blob, parent);
+ switch (compat) {
+ case COMPAT_SAMSUNG_S3C2440_I2C:
+ pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+ error |= pcodec_info->i2c_bus;
+ debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+ pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+ "reg", 0);
+ error |= pcodec_info->i2c_dev_addr;
+ debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+ break;
+ default:
+ debug("%s: Unknown compat id %d\n", __func__, compat);
+ return -1;
+ }
+#else
+ pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+ pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+ debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+
+ pcodec_info->codec_type = CODEC_WM_8994;
+
+ if (error == -1) {
+ debug("fail to get wm8994 codec node properties\n");
+ return -1;
+ }
+
+ return 0;
+}
+
/*wm8994 Device Initialisation */
-int wm8994_init(struct sound_codec_info *pcodec_info,
- enum en_audio_interface aif_id,
+int wm8994_init(const void *blob, enum en_audio_interface aif_id,
int sampling_rate, int mclk_freq,
int bits_per_sample, unsigned int channels)
{
int ret = 0;
+ struct sound_codec_info *pcodec_info = &g_codec_info;
+
+ /* Get the codec Values */
+ if (get_codec_values(pcodec_info, blob) < 0) {
+ debug("FDT Codec values failed\n");
+ return -1;
+ }
/* shift the device address by 1 for 7 bit addressing */
g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h
index a8f0de18c5..a1e83353b4 100644
--- a/drivers/sound/wm8994.h
+++ b/drivers/sound/wm8994.h
@@ -69,8 +69,7 @@ enum wm8994_type {
/*
* intialise wm8994 sound codec device for the given configuration
*
- * @param pcodec_info pointer value of the sound codec info structure
- * parsed from device tree
+ * @param blob FDT node for codec values
* @param aif_id enum value of codec interface port in which
* soc i2s is connected
* @param sampling_rate Sampling rate ranges between from 8khz to 96khz
@@ -80,8 +79,7 @@ enum wm8994_type {
*
* @returns -1 for error and 0 Success.
*/
-int wm8994_init(struct sound_codec_info *pcodec_info,
- enum en_audio_interface aif_id,
+int wm8994_init(const void *blob, enum en_audio_interface aif_id,
int sampling_rate, int mclk_freq,
int bits_per_sample, unsigned int channels);
#endif /*__WM8994_H__ */
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index 3e6c18f87f..be60ada2ba 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -20,6 +20,7 @@
#include <common.h>
#include <malloc.h>
#include <spi.h>
+#include <fdtdec.h>
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
@@ -28,16 +29,20 @@
#include <asm/arch-exynos/spi.h>
#include <asm/io.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/* Information about each SPI controller */
struct spi_bus {
enum periph_id periph_id;
s32 frequency; /* Default clock frequency, -1 for none */
struct exynos_spi *regs;
int inited; /* 1 if this bus is ready for use */
+ int node;
};
/* A list of spi buses that we know about */
static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS];
+static unsigned int bus_count;
struct exynos_spi_slave {
struct spi_slave slave;
@@ -50,7 +55,7 @@ struct exynos_spi_slave {
static struct spi_bus *spi_get_bus(unsigned dev_index)
{
- if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS)
+ if (dev_index < bus_count)
return &spi_bus[dev_index];
debug("%s: invalid bus %d", __func__, dev_index);
@@ -347,21 +352,100 @@ static inline struct exynos_spi *get_spi_base(int dev_index)
(dev_index - 3);
}
+/*
+ * Read the SPI config from the device tree node.
+ *
+ * @param blob FDT blob to read from
+ * @param node Node offset to read from
+ * @param bus SPI bus structure to fill with information
+ * @return 0 if ok, or -FDT_ERR_NOTFOUND if something was missing
+ */
+static int spi_get_config(const void *blob, int node, struct spi_bus *bus)
+{
+ bus->node = node;
+ bus->regs = (struct exynos_spi *)fdtdec_get_addr(blob, node, "reg");
+ bus->periph_id = pinmux_decode_periph_id(blob, node);
+
+ if (bus->periph_id == PERIPH_ID_NONE) {
+ debug("%s: Invalid peripheral ID %d\n", __func__,
+ bus->periph_id);
+ return -FDT_ERR_NOTFOUND;
+ }
+
+ /* Use 500KHz as a suitable default */
+ bus->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+ 500000);
+
+ return 0;
+}
+
+/*
+ * Process a list of nodes, adding them to our list of SPI ports.
+ *
+ * @param blob fdt blob
+ * @param node_list list of nodes to process (any <=0 are ignored)
+ * @param count number of nodes to process
+ * @param is_dvc 1 if these are DVC ports, 0 if standard I2C
+ * @return 0 if ok, -1 on error
+ */
+static int process_nodes(const void *blob, int node_list[], int count)
+{
+ int i;
+
+ /* build the i2c_controllers[] for each controller */
+ for (i = 0; i < count; i++) {
+ int node = node_list[i];
+ struct spi_bus *bus;
+
+ if (node <= 0)
+ continue;
+
+ bus = &spi_bus[i];
+ if (spi_get_config(blob, node, bus)) {
+ printf("exynos spi_init: failed to decode bus %d\n",
+ i);
+ return -1;
+ }
+
+ debug("spi: controller bus %d at %p, periph_id %d\n",
+ i, bus->regs, bus->periph_id);
+ bus->inited = 1;
+ bus_count++;
+ }
+
+ return 0;
+}
+
/* Sadly there is no error return from this function */
void spi_init(void)
{
- int i;
+ int count;
+
+#ifdef CONFIG_OF_CONTROL
+ int node_list[EXYNOS5_SPI_NUM_CONTROLLERS];
+ const void *blob = gd->fdt_blob;
+
+ count = fdtdec_find_aliases_for_id(blob, "spi",
+ COMPAT_SAMSUNG_EXYNOS_SPI, node_list,
+ EXYNOS5_SPI_NUM_CONTROLLERS);
+ if (process_nodes(blob, node_list, count))
+ return;
+
+#else
struct spi_bus *bus;
- for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) {
- bus = &spi_bus[i];
- bus->regs = get_spi_base(i);
- bus->periph_id = PERIPH_ID_SPI0 + i;
+ for (count = 0; count < EXYNOS5_SPI_NUM_CONTROLLERS; count++) {
+ bus = &spi_bus[count];
+ bus->regs = get_spi_base(count);
+ bus->periph_id = PERIPH_ID_SPI0 + count;
/* Although Exynos5 supports upto 50Mhz speed,
* we are setting it to 10Mhz for safe side
*/
bus->frequency = 10000000;
bus->inited = 1;
+ bus->node = 0;
+ bus_count = EXYNOS5_SPI_NUM_CONTROLLERS;
}
+#endif
}
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index 9f0ed06a85..3ca4c5c331 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -21,13 +21,71 @@
*/
#include <common.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <malloc.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
+#include <asm-generic/errno.h>
+#include <linux/compat.h>
#include "ehci.h"
+/* Declare global data pointer */
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * Contains pointers to register base addresses
+ * for the usb controller.
+ */
+struct exynos_ehci {
+ struct exynos_usb_phy *usb;
+ unsigned int *hcd;
+};
+
+static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos)
+{
+ unsigned int node;
+ int depth;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_SAMSUNG_EXYNOS_EHCI);
+ if (node <= 0) {
+ debug("EHCI: Can't get device node for ehci\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Get the base address for EHCI controller from the device node
+ */
+ exynos->hcd = (unsigned int *)fdtdec_get_addr(blob, node, "reg");
+ if (exynos->hcd == NULL) {
+ debug("Can't get the EHCI register address\n");
+ return -ENXIO;
+ }
+
+ depth = 0;
+ node = fdtdec_next_compatible_subnode(blob, node,
+ COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth);
+ if (node <= 0) {
+ debug("EHCI: Can't get device node for usb-phy controller\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Get the base address for usbphy from the device node
+ */
+ exynos->usb = (struct exynos_usb_phy *)fdtdec_get_addr(blob, node,
+ "reg");
+ if (exynos->usb == NULL) {
+ debug("Can't get the usbphy register address\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
@@ -86,12 +144,20 @@ static void reset_usb_phy(struct exynos_usb_phy *usb)
*/
int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
- struct exynos_usb_phy *usb;
+ struct exynos_ehci *exynos = NULL;
+
+ exynos = (struct exynos_ehci *)
+ kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL);
+ if (!exynos) {
+ debug("failed to allocate exynos ehci context\n");
+ return -ENOMEM;
+ }
- usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
- setup_usb_phy(usb);
+ exynos_usb_parse_dt(gd->fdt_blob, exynos);
- *hccr = (struct ehci_hccr *)samsung_get_base_usb_ehci();
+ setup_usb_phy(exynos->usb);
+
+ *hccr = (struct ehci_hccr *)(exynos->hcd);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr
+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
@@ -99,6 +165,8 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
+ kfree(exynos);
+
return 0;
}
@@ -108,10 +176,20 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
*/
int ehci_hcd_stop(int index)
{
- struct exynos_usb_phy *usb;
+ struct exynos_ehci *exynos = NULL;
+
+ exynos = (struct exynos_ehci *)
+ kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL);
+ if (!exynos) {
+ debug("failed to allocate exynos ehci context\n");
+ return -ENOMEM;
+ }
+
+ exynos_usb_parse_dt(gd->fdt_blob, exynos);
+
+ reset_usb_phy(exynos->usb);
- usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
- reset_usb_phy(usb);
+ kfree(exynos);
return 0;
}
diff --git a/drivers/video/exynos_dp.c b/drivers/video/exynos_dp.c
index 53e410120a..d72fa565a7 100644
--- a/drivers/video/exynos_dp.c
+++ b/drivers/video/exynos_dp.c
@@ -857,7 +857,6 @@ unsigned int exynos_init_dp(void)
{
unsigned int ret;
struct edp_device_info *edp_info;
- struct edp_disp_info disp_info;
edp_info = kzalloc(sizeof(struct edp_device_info), GFP_KERNEL);
if (!edp_info) {
@@ -870,7 +869,6 @@ unsigned int exynos_init_dp(void)
debug("failed to get edp_info data.\n");
return -EFAULT;
}
- disp_info = edp_info->disp_info;
exynos_dp_disp_info(&edp_info->disp_info);
diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
index d9a3f9ab18..ee0ed06d6f 100644
--- a/drivers/video/exynos_fb.c
+++ b/drivers/video/exynos_fb.c
@@ -63,8 +63,12 @@ static void exynos_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
static void exynos_lcd_init(vidinfo_t *vid)
{
exynos_fimd_lcd_init(vid);
+
+ /* Enable flushing after LCD writes if requested */
+ lcd_set_flush_dcache(1);
}
+#ifdef CONFIG_CMD_BMP
static void draw_logo(void)
{
int x, y;
@@ -87,6 +91,7 @@ static void draw_logo(void)
addr = panel_info.logo_addr;
bmp_display(addr, x, y);
}
+#endif
static void lcd_panel_on(vidinfo_t *vid)
{
@@ -145,7 +150,9 @@ void lcd_enable(void)
if (panel_info.logo_on) {
memset(lcd_base, 0, panel_width * panel_height *
(NBITS(panel_info.vl_bpix) >> 3));
+#ifdef CONFIG_CMD_BMP
draw_logo();
+#endif
}
lcd_panel_on(&panel_info);
diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c
index 06eae2ed78..2efe6a61c2 100644
--- a/drivers/video/exynos_fimd.c
+++ b/drivers/video/exynos_fimd.c
@@ -88,14 +88,18 @@ static void exynos_fimd_set_par(unsigned int win_id)
/* DATAPATH is DMA */
cfg |= EXYNOS_WINCON_DATAPATH_DMA;
- /* bpp is 32 */
- cfg |= EXYNOS_WINCON_WSWP_ENABLE;
+ if (pvid->logo_on) /* To get proprietary LOGO */
+ cfg |= EXYNOS_WINCON_WSWP_ENABLE;
+ else /* To get output console on LCD */
+ cfg |= EXYNOS_WINCON_HAWSWP_ENABLE;
/* dma burst is 16 */
cfg |= EXYNOS_WINCON_BURSTLEN_16WORD;
- /* pixel format is unpacked RGB888 */
- cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888;
+ if (pvid->logo_on) /* To get proprietary LOGO */
+ cfg |= EXYNOS_WINCON_BPPMODE_24BPP_888;
+ else /* To get output console on LCD */
+ cfg |= EXYNOS_WINCON_BPPMODE_16BPP_565;
writel(cfg, (unsigned int)&fimd_ctrl->wincon0 +
EXYNOS_WINCON(win_id));
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
new file mode 100644
index 0000000000..cabd2f2524
--- /dev/null
+++ b/include/configs/exynos5250-dt.h
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG EXYNOS5250 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG /* in a SAMSUNG core */
+#define CONFIG_S5P /* S5P Family */
+#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
+#define CONFIG_SMDK5250 /* which is in a SMDK5250 */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Enable fdt support for Exynos5250 */
+#define CONFIG_ARCH_DEVICE_TREE exynos5250
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_SYS_DCACHE_OFF
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* input clock of PLL: SMDK5250 has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_SMDK5250 macro will be removed once added to mach-types */
+#define MACH_TYPE_SMDK5250 3774
+#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL3 /* use SERIAL 3 */
+#define CONFIG_BAUDRATE 115200
+#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
+
+/* Console configuration */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define EXYNOS_DEVICE_SETTINGS \
+ "stdin=serial\0" \
+ "stdout=serial,lcd\0" \
+ "stderr=serial,lcd\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXYNOS_DEVICE_SETTINGS
+
+#define TZPC_BASE_OFFSET 0x10000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_SDHCI
+#define CONFIG_S5P_SDHCI
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* PWM */
+#define CONFIG_PWM
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NET
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_EXYNOS
+#define CONFIG_USB_STORAGE
+
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR 0x02020030
+
+/* specific .lds file */
+#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds"
+#define CONFIG_SPL_TEXT_BASE 0x02023400
+#define CONFIG_SPL_MAX_SIZE (14 * 1024)
+
+#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "SMDK5250 # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_RD_LVL
+
+#define CONFIG_NR_DRAM_BANKS 8
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for SMDK5250"
+
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#define CONFIG_SECURE_BL1_ONLY
+
+/* Secure FW size configuration */
+#ifdef CONFIG_SECURE_BL1_ONLY
+#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
+#else
+#define CONFIG_SEC_FW_SIZE 0
+#endif
+
+/* Configuration of BL1, BL2, ENV Blocks on mmc */
+#define CONFIG_RES_BLOCK_SIZE (512)
+#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+
+#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
+#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
+#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
+#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
+
+#define OM_STAT (0x1f << 1)
+#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
+#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
+
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_IRAM_STACK 0x02050000
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+
+/* I2C */
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_HARD_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
+#define CONFIG_DRIVER_S3C24X0_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_MAX_I2C_NUM 8
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_I2C_EDID
+
+/* PMIC */
+#define CONFIG_PMIC
+#define CONFIG_PMIC_I2C
+#define CONFIG_PMIC_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS 1
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_MAX77686
+
+/* SPI */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_SPI_FLASH
+
+#ifdef CONFIG_SPI_FLASH
+#define CONFIG_EXYNOS_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 50000000
+#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#endif
+
+#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
+#define CONFIG_ENV_SPI_BUS 1
+#define CONFIG_ENV_SPI_MAX_HZ 50000000
+#endif
+
+/* Ethernet Controllor Driver */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE 0x5000000
+#define CONFIG_SMC911X_16_BIT
+#define CONFIG_ENV_SROM_BANK 1
+#endif /*CONFIG_CMD_NET*/
+
+/* Enable PXE Support */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PXE
+#define CONFIG_MENU
+#endif
+
+/* Sound */
+#define CONFIG_CMD_SOUND
+#ifdef CONFIG_CMD_SOUND
+#define CONFIG_SOUND
+#define CONFIG_I2S
+#define CONFIG_SOUND_WM8994
+#endif
+
+/* Enable devicetree support */
+#define CONFIG_OF_LIBFDT
+
+/* SHA hashing */
+#define CONFIG_CMD_HASH
+#define CONFIG_HASH_VERIFY
+#define CONFIG_SHA1
+#define CONFIG_SHA256
+
+/* Display */
+#define CONFIG_LCD
+#ifdef CONFIG_LCD
+#define CONFIG_EXYNOS_FB
+#define CONFIG_EXYNOS_DP
+#define LCD_XRES 2560
+#define LCD_YRES 1600
+#define LCD_BPP LCD_COLOR16
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 75c25c0034..81f83a8022 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -1,7 +1,7 @@
/*
- * Copyright (C) 2011 Samsung Electronics
+ * Copyright (C) 2012 Samsung Electronics
*
- * Configuration settings for the SAMSUNG SMDK5250 (EXYNOS5250) board.
+ * Configuration settings for the SAMSUNG SMDK5250 board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -22,274 +22,12 @@
* MA 02111-1307 USA
*/
-#ifndef __CONFIG_H
-#define __CONFIG_H
+#ifndef __CONFIG_SMDK_H
+#define __CONFIG_SMDK_H
-/* High Level Configuration Options */
-#define CONFIG_SAMSUNG /* in a SAMSUNG core */
-#define CONFIG_S5P /* S5P Family */
-#define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */
-#define CONFIG_SMDK5250 /* which is in a SMDK5250 */
+#include <configs/exynos5250-dt.h>
-#include <asm/arch/cpu.h> /* get chip and board defs */
+#undef CONFIG_DEFAULT_DEVICE_TREE
+#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Keep L2 Cache Disabled */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_TEXT_BASE 0x43E00000
-
-/* input clock of PLL: SMDK5250 has 24MHz input clock */
-#define CONFIG_SYS_CLK_FREQ 24000000
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
-
-/* MACH_TYPE_SMDK5250 macro will be removed once added to mach-types */
-#define MACH_TYPE_SMDK5250 3774
-#define CONFIG_MACH_TYPE MACH_TYPE_SMDK5250
-
-/* Power Down Modes */
-#define S5P_CHECK_SLEEP 0x00000BAD
-#define S5P_CHECK_DIDLE 0xBAD00000
-#define S5P_CHECK_LPA 0xABAD0000
-
-/* Offset for inform registers */
-#define INFORM0_OFFSET 0x800
-#define INFORM1_OFFSET 0x804
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
-
-/* select serial console configuration */
-#define CONFIG_SERIAL3 /* use SERIAL 3 */
-#define CONFIG_BAUDRATE 115200
-#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
-
-#define TZPC_BASE_OFFSET 0x10000
-
-/* SD/MMC configuration */
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MMC
-#define CONFIG_SDHCI
-#define CONFIG_S5P_SDHCI
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/* PWM */
-#define CONFIG_PWM
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/* Command definition*/
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NET
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_EXYNOS
-#define CONFIG_USB_STORAGE
-
-/* MMC SPL */
-#define CONFIG_SPL
-#define COPY_BL2_FNPTR_ADDR 0x02020030
-
-/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds"
-#define CONFIG_SPL_TEXT_BASE 0x02023400
-#define CONFIG_SPL_MAX_SIZE (14 * 1024)
-
-#define CONFIG_BOOTCOMMAND "mmc read 40007000 451 2000; bootm 40007000"
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT "SMDK5250 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_RD_LVL
-
-#define CONFIG_NR_DRAM_BANKS 8
-#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
-#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
-#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
-#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE
-#define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE))
-#define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE
-
-#define CONFIG_SYS_MONITOR_BASE 0x00000000
-
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_IDENT_STRING " for SMDK5250"
-
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#define CONFIG_SECURE_BL1_ONLY
-
-/* Secure FW size configuration */
-#ifdef CONFIG_SECURE_BL1_ONLY
-#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
-#else
-#define CONFIG_SEC_FW_SIZE 0
-#endif
-
-/* Configuration of BL1, BL2, ENV Blocks on mmc */
-#define CONFIG_RES_BLOCK_SIZE (512)
-#define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
-
-#define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
-#define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-#define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE)
-
-/* U-boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
-
-#define OM_STAT (0x1f << 1)
-#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
-#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_IRAM_STACK 0x02050000
-
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
-
-/* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_HARD_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000 /* 100 Kbps */
-#define CONFIG_DRIVER_S3C24X0_I2C
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_MAX_I2C_NUM 8
-#define CONFIG_SYS_I2C_SLAVE 0x0
-#define CONFIG_I2C_EDID
-
-/* PMIC */
-#define CONFIG_PMIC
-#define CONFIG_PMIC_I2C
-#define CONFIG_PMIC_MAX77686
-
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS 5
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS 1
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#endif
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_MAX77686
-
-/* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED 50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS 5
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS 1
-#define CONFIG_ENV_SPI_MAX_HZ 50000000
-#endif
-
-/* Ethernet Controllor Driver */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE 0x5000000
-#define CONFIG_SMC911X_16_BIT
-#define CONFIG_ENV_SROM_BANK 1
-#endif /*CONFIG_CMD_NET*/
-
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
-/* Sound */
-#define CONFIG_CMD_SOUND
-#ifdef CONFIG_CMD_SOUND
-#define CONFIG_SOUND
-#define CONFIG_I2S
-#define CONFIG_SOUND_WM8994
-#endif
-
-/* Enable devicetree support */
-#define CONFIG_OF_LIBFDT
-
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
-
-#endif /* __CONFIG_H */
+#endif /* __CONFIG_SMDK_H */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 6efee5c477..63745ac8f1 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -99,6 +99,7 @@
#define CONFIG_CMD_MMC
#define CONFIG_CMD_DFU
#define CONFIG_CMD_GPT
+#define CONFIG_CMD_SETEXPR
/* FAT */
#define CONFIG_CMD_FAT
@@ -144,9 +145,8 @@
"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
#define CONFIG_DFU_ALT \
- "dfu_alt_info=" \
"u-boot mmc 80 400;" \
- "uImage fat 0 2\0" \
+ "uImage ext4 0 2\0" \
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
@@ -165,20 +165,20 @@
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
"nfsboot=" \
- "set bootargs root=/dev/nfs rw " \
+ "setenv bootargs root=/dev/nfs rw " \
"nfsroot=${nfsroot},nolock,tcp " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
"; run bootk\0" \
"ramfsboot=" \
- "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
+ "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
"${console} ${meminfo} " \
"initrd=0x43000000,8M ramdisk=8192\0" \
"mmcboot=" \
- "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run loaduimage; bootm 0x40007FC0\0" \
- "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
+ "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
@@ -187,13 +187,31 @@
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
+ "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
- "mmcrootpart=3\0" \
+ "mmcrootpart=5\0" \
"opts=always_resume=1\0" \
"partitions=" PARTS_DEFAULT \
- CONFIG_DFU_ALT \
+ "dfu_alt_info=" CONFIG_DFU_ALT \
+ "spladdr=0x40000100\0" \
+ "splsize=0x200\0" \
+ "splfile=falcon.bin\0" \
+ "spl_export=" \
+ "setexpr spl_imgsize ${splsize} + 8 ;" \
+ "setexpr spl_imgaddr ${spladdr} - 8 ;" \
+ "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
+ "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
+ "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
+ "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
+ "spl export atags 0x40007FC0;" \
+ "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
+ "mw.l ${spl_addr_tmp} ${splsize};" \
+ "ext4write mmc ${mmcdev}:${mmcbootpart}" \
+ " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
+ "setenv spl_imgsize;" \
+ "setenv spl_imgaddr;" \
+ "setenv spl_addr_tmp;\0"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -234,6 +252,14 @@
#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */
#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/* EXT4 */
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+/* Falcon mode definitions */
+#define CONFIG_CMD_SPL
+#define CONFIG_SYS_SPL_ARGS_ADDR PHYS_SDRAM_1 + 0x100
/* GPT */
#define CONFIG_EFI_PARTITION
@@ -242,7 +268,6 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_CACHELINE_SIZE 32
-
#define CONFIG_SOFT_I2C
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_SYS_I2C_INIT_BOARD
diff --git a/include/fdtdec.h b/include/fdtdec.h
index 70d0e979d1..f77d195630 100644
--- a/include/fdtdec.h
+++ b/include/fdtdec.h
@@ -70,6 +70,15 @@ enum fdt_compat_id {
COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */
COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */
COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */
+ COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
+ COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
+ COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */
+ COMPAT_SAMSUNG_EXYNOS5_SOUND, /* Exynos Sound */
+ COMPAT_WOLFSON_WM8994_CODEC, /* Wolfson WM8994 Sound Codec */
+ COMPAT_SAMSUNG_EXYNOS_SPI, /* Exynos SPI */
+ COMPAT_SAMSUNG_EXYNOS_EHCI, /* Exynos EHCI controller */
+ COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
+ COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_COUNT,
};
diff --git a/include/i2c.h b/include/i2c.h
index 16f099d2ee..c60d07583b 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -262,4 +262,30 @@ extern int get_multi_scl_pin(void);
extern int get_multi_sda_pin(void);
extern int multi_i2c_init(void);
#endif
+
+/**
+ * Get FDT values for i2c bus.
+ *
+ * @param blob Device tree blbo
+ * @return the number of I2C bus
+ */
+void board_i2c_init(const void *blob);
+
+/**
+ * Find the I2C bus number by given a FDT I2C node.
+ *
+ * @param blob Device tree blbo
+ * @param node FDT I2C node to find
+ * @return the number of I2C bus (zero based), or -1 on error
+ */
+int i2c_get_bus_num_fdt(int node);
+
+/**
+ * Reset the I2C bus represented by the given a FDT I2C node.
+ *
+ * @param blob Device tree blbo
+ * @param node FDT I2C node to find
+ * @return 0 if port was reset, -1 if not found
+ */
+int i2c_reset_port_fdt(const void *blob, int node);
#endif /* _I2C_H_ */
diff --git a/include/sound.h b/include/sound.h
index ea0b1158f8..d73839d9f0 100644
--- a/include/sound.h
+++ b/include/sound.h
@@ -46,10 +46,10 @@ struct sound_codec_info {
/*
* Initialises audio sub system
- *
+ * @param blob Pointer of device tree node or NULL if none.
* @return int value 0 for success, -1 for error
*/
-int sound_init(void);
+int sound_init(const void *blob);
/*
* plays the pcm data buffer in pcm_data.h through i2s1 to make the
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 6dba4389f2..16921e14c9 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -45,6 +45,15 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"),
COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"),
COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"),
+ COMPAT(SMSC_LAN9215, "smsc,lan9215"),
+ COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
+ COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"),
+ COMPAT(SAMSUNG_EXYNOS5_SOUND, "samsung,exynos-sound"),
+ COMPAT(WOLFSON_WM8994_CODEC, "wolfson,wm8994-codec"),
+ COMPAT(SAMSUNG_EXYNOS_SPI, "samsung,exynos-spi"),
+ COMPAT(SAMSUNG_EXYNOS_EHCI, "samsung,exynos-ehci"),
+ COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
+ COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
};
const char *fdtdec_get_compatible(enum fdt_compat_id id)