summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/cpu/sa1100/timer.c2
-rw-r--r--board/sbc8641d/sbc8641d.c8
-rw-r--r--cmd/mem.c4
-rw-r--r--drivers/ata/sata_sil3114.c16
-rw-r--r--drivers/fpga/stratixII.c6
-rw-r--r--drivers/net/ax88180.c10
-rw-r--r--drivers/net/eepro100.c18
-rw-r--r--drivers/net/lan91c96.c10
-rw-r--r--drivers/net/smc91111.c22
-rw-r--r--drivers/qe/uec_phy.c6
-rw-r--r--drivers/rtc/ds1306.c26
-rw-r--r--drivers/video/mb862xx.c6
-rw-r--r--examples/standalone/smc91111_eeprom.c6
-rw-r--r--lib/time.c2
14 files changed, 71 insertions, 71 deletions
diff --git a/arch/arm/cpu/sa1100/timer.c b/arch/arm/cpu/sa1100/timer.c
index 8e20c96bcd..f2cbee5dca 100644
--- a/arch/arm/cpu/sa1100/timer.c
+++ b/arch/arm/cpu/sa1100/timer.c
@@ -23,7 +23,7 @@ ulong get_timer (ulong base)
return get_timer_masked ();
}
-void __udelay (unsigned long usec)
+void __udelay(unsigned long usec)
{
ulong tmo;
ulong endtime;
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index 2346564c7d..91867d4f3d 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -123,12 +123,12 @@ long int fixed_sdram (void)
asm ("sync;isync");
- udelay (500);
+ udelay(500);
ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
asm ("sync; isync");
- udelay (500);
+ udelay(500);
ddr = &immap->im_ddr2;
ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
@@ -154,12 +154,12 @@ long int fixed_sdram (void)
asm ("sync;isync");
- udelay (500);
+ udelay(500);
ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
asm ("sync; isync");
- udelay (500);
+ udelay(500);
#endif
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
diff --git a/cmd/mem.c b/cmd/mem.c
index 7f7957e74a..423e6c1056 100644
--- a/cmd/mem.c
+++ b/cmd/mem.c
@@ -189,7 +189,7 @@ static int do_mem_mdc(struct cmd_tbl *cmdtp, int flag, int argc,
/* delay for <count> ms... */
for (i=0; i<count; i++)
- udelay (1000);
+ udelay(1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
@@ -217,7 +217,7 @@ static int do_mem_mwc(struct cmd_tbl *cmdtp, int flag, int argc,
/* delay for <count> ms... */
for (i=0; i<count; i++)
- udelay (1000);
+ udelay(1000);
/* check for ctrl-c to abort... */
if (ctrlc()) {
diff --git a/drivers/ata/sata_sil3114.c b/drivers/ata/sata_sil3114.c
index 7e802170d8..7348566dd0 100644
--- a/drivers/ata/sata_sil3114.c
+++ b/drivers/ata/sata_sil3114.c
@@ -64,9 +64,9 @@ static int sata_bus_softreset (int num)
port[num].ctl_reg = 0x08; /*Default value of control reg */
writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
- udelay (10);
+ udelay(10);
writeb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
- udelay (10);
+ udelay(10);
writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
/* spec mandates ">= 2ms" before checking status.
@@ -121,7 +121,7 @@ static void sata_identify (int num, int dev)
cmd = ATA_CMD_ID_ATA; /*Device Identify Command */
writeb (cmd, port[num].ioaddr.command_addr);
readb (port[num].ioaddr.altstatus_addr);
- udelay (10);
+ udelay(10);
status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0);
if (status & ATA_ERR) {
@@ -194,7 +194,7 @@ static void set_Feature_cmd (int num, int dev)
writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr);
- udelay (50);
+ udelay(50);
msleep (150);
status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0);
@@ -392,7 +392,7 @@ static u8 wait_for_irq (int num, unsigned int max)
if (readl (port) & VND_TF_CNST_INTST) {
break;
}
- udelay (1000);
+ udelay(1000);
max--;
} while ((max > 0));
@@ -408,7 +408,7 @@ static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits,
if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) {
break;
}
- udelay (1000);
+ udelay(1000);
max--;
} while ((status & bits) && (max > 0));
@@ -429,7 +429,7 @@ static void msleep (int count)
int i;
for (i = 0; i < count; i++)
- udelay (1000);
+ udelay(1000);
}
/* Read up to 255 sectors
@@ -616,7 +616,7 @@ ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff)
output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS);
readb (port[num].ioaddr.altstatus_addr);
- udelay (50);
+ udelay(50);
++n;
++blknr;
diff --git a/drivers/fpga/stratixII.c b/drivers/fpga/stratixII.c
index 12d8dd19bf..4edbfe4ba8 100644
--- a/drivers/fpga/stratixII.c
+++ b/drivers/fpga/stratixII.c
@@ -116,9 +116,9 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
/* 2. Strat burn cycle by deasserting config for t_CFG and waiting t_CF2CK after reaserted */
fns->config (0, 1, cookie);
- udelay (5); /* nCONFIG low pulse width 2usec */
+ udelay(5); /* nCONFIG low pulse width 2usec */
fns->config (1, 1, cookie);
- udelay (100); /* nCONFIG high to first rising edge on DCLK */
+ udelay(100); /* nCONFIG high to first rising edge on DCLK */
/* 3. Start the Data cycle with clk deasserted */
bytecount = 0;
@@ -168,7 +168,7 @@ int StratixII_ps_fpp_load (Altera_desc * desc, void *buf, size_t bsize,
/* 4. Set one last clock and check conf done signal */
fns->clk (1, 1, cookie);
- udelay (100);
+ udelay(100);
if (!fns->done (cookie)) {
printf (" error!.\n");
fns->abort (cookie);
diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c
index d13eb11187..2715653cd4 100644
--- a/drivers/net/ax88180.c
+++ b/drivers/net/ax88180.c
@@ -118,7 +118,7 @@ static int ax88180_phy_reset (struct eth_device *dev)
/* Wait for the reset to complete, or time out (500 ms) */
while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) {
- udelay (1000);
+ udelay(1000);
if (--delay_cnt == 0) {
printf ("Failed to reset PHY!\n");
return -1;
@@ -177,7 +177,7 @@ static int ax88180_poll_tx_complete (struct eth_device *dev)
if ((tmpval & txbs_txdp) == 0)
break;
- udelay (100);
+ udelay(100);
}
if (TimeOutCnt)
@@ -342,7 +342,7 @@ static void ax88180_media_config (struct eth_device *dev)
if (bmsr_val & BMSR_LSTATUS) {
break;
}
- udelay (100);
+ udelay(100);
}
bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
@@ -364,7 +364,7 @@ static void ax88180_media_config (struct eth_device *dev)
if (bmsr_val & BMSR_ANEGCOMPLETE) {
break;
}
- udelay (100);
+ udelay(100);
}
} else
debug ("ax88180: Auto-negotiation is disabled.\n");
@@ -680,7 +680,7 @@ static void ax88180_read_mac_addr (struct eth_device *dev)
tmp_regval = INW (dev, PROMCTRL);
if ((tmp_regval & RELOAD_EEPROM) == 0)
break;
- udelay (1000);
+ udelay(1000);
}
/* Get MAC addresses */
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 2fe0ba6e20..36a9d4d91c 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -462,7 +462,7 @@ int eepro100_initialize (bd_t * bis)
*/
pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
- udelay (10 * 1000);
+ udelay(10 * 1000);
read_hw_addr (dev, bis);
}
@@ -480,10 +480,10 @@ static int eepro100_init (struct eth_device *dev, bd_t * bis)
/* Reset the ethernet controller
*/
OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
- udelay (20);
+ udelay(20);
OUTL (dev, I82559_RESET, SCBPort);
- udelay (20);
+ udelay(20);
if (!wait_for_eepro100 (dev)) {
printf ("Error: Can not reset ethernet controller.\n");
@@ -721,10 +721,10 @@ static void eepro100_halt (struct eth_device *dev)
/* Reset the ethernet controller
*/
OUTL (dev, I82559_SELECTIVE_RESET, SCBPort);
- udelay (20);
+ udelay(20);
OUTL (dev, I82559_RESET, SCBPort);
- udelay (20);
+ udelay(20);
if (!wait_for_eepro100 (dev)) {
printf ("Error: Can not reset ethernet controller.\n");
@@ -760,19 +760,19 @@ static int read_eeprom (struct eth_device *dev, int location, int addr_len)
short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
OUTW (dev, EE_ENB | dataval, SCBeeprom);
- udelay (1);
+ udelay(1);
OUTW (dev, EE_ENB | dataval | EE_SHIFT_CLK, SCBeeprom);
- udelay (1);
+ udelay(1);
}
OUTW (dev, EE_ENB, SCBeeprom);
for (i = 15; i >= 0; i--) {
OUTW (dev, EE_ENB | EE_SHIFT_CLK, SCBeeprom);
- udelay (1);
+ udelay(1);
retval = (retval << 1) |
((INW (dev, SCBeeprom) & EE_DATA_READ) ? 1 : 0);
OUTW (dev, EE_ENB, SCBeeprom);
- udelay (1);
+ udelay(1);
}
/* Terminate the EEPROM access. */
diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c
index c08bd21f95..1989b66a48 100644
--- a/drivers/net/lan91c96.c
+++ b/drivers/net/lan91c96.c
@@ -211,7 +211,7 @@ static void smc_reset(struct eth_device *dev)
SMC_SELECT_BANK(dev, 0);
SMC_outw(dev, LAN91C96_RCR_SOFT_RST, LAN91C96_RCR);
- udelay (10);
+ udelay(10);
/* Disable transmit and receive functionality */
SMC_outw(dev, 0, LAN91C96_RCR);
@@ -438,7 +438,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet,
/* wait for MMU getting ready (low) */
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (10);
+ udelay(10);
PRINTK2("MMU ready\n");
@@ -455,7 +455,7 @@ static int smc_send_packet(struct eth_device *dev, void *packet,
/* wait for MMU getting ready (low) */
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (10);
+ udelay(10);
PRINTK2 ("MMU ready\n");
}
@@ -600,13 +600,13 @@ static int smc_rcv(struct eth_device *dev)
}
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
/* error or good, tell the card to get rid of this packet */
SMC_outw(dev, LAN91C96_MMUCR_RELEASE_RX, LAN91C96_MMU);
while (SMC_inw(dev, LAN91C96_MMU) & LAN91C96_MMUCR_NO_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
if (!is_error) {
/* Pass the packet up to the protocol layers. */
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 5754c3106c..52bbf05a1e 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -266,7 +266,7 @@ static inline void smc_wait_mmu_release_complete (struct eth_device *dev)
/* assume bank 2 selected */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
if (++count > 200)
break;
}
@@ -318,7 +318,7 @@ static void smc_reset (struct eth_device *dev)
SMC_SELECT_BANK (dev, 0);
/* this should pause enough for the chip to be happy */
- udelay (10);
+ udelay(10);
/* Disable transmit and receive functionality */
SMC_outw (dev, RCR_CLEAR, RCR_REG);
@@ -333,7 +333,7 @@ static void smc_reset (struct eth_device *dev)
smc_wait_mmu_release_complete (dev);
SMC_outw (dev, MC_RESET, MMU_CMD_REG);
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY)
- udelay (1); /* Wait until not busy */
+ udelay(1); /* Wait until not busy */
/* Note: It doesn't seem that waiting for the MMU busy is needed here,
but this is a place where future chipsets _COULD_ break. Be wary
@@ -564,7 +564,7 @@ again:
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (10);
+ udelay(10);
}
PRINTK2 ("MMU ready\n");
@@ -583,7 +583,7 @@ again:
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
- udelay (10);
+ udelay(10);
}
PRINTK2 ("MMU ready\n");
@@ -957,19 +957,19 @@ static word smc_read_phy_register (struct eth_device *dev, byte phyreg)
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
@@ -1078,19 +1078,19 @@ static void smc_write_phy_register (struct eth_device *dev, byte phyreg,
for (i = 0; i < sizeof bits; ++i) {
/* Clock Low - output data */
SMC_outw (dev, mii_reg | bits[i], MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Clock Hi - input data */
SMC_outw (dev, mii_reg | bits[i] | MII_MCLK, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
bits[i] |= SMC_inw (dev, MII_REG) & MII_MDI;
}
/* Return to idle state */
/* Set clock to low, data to low, and output tristated */
SMC_outw (dev, mii_reg, MII_REG);
- udelay (SMC_PHY_CLOCK_DELAY);
+ udelay(SMC_PHY_CLOCK_DELAY);
/* Restore original bank select */
SMC_SELECT_BANK (dev, oldBank);
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 9425379794..1dae261509 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -875,7 +875,7 @@ void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
uec_phy_write(mii_info, 0x04, 0x01e1);
uec_phy_write(mii_info, 0x00, 0x9140);
uec_phy_write(mii_info, 0x00, 0x1000);
- udelay (100000);
+ mdelay(100);
uec_phy_write(mii_info, 0x00, 0x2900);
uec_phy_write(mii_info, 0x14, 0x0cd2);
uec_phy_write(mii_info, 0x00, 0xa100);
@@ -884,13 +884,13 @@ void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
uec_phy_write(mii_info, 0x04, 0x05e1);
uec_phy_write(mii_info, 0x00, 0xa100);
uec_phy_write(mii_info, 0x00, 0x2100);
- udelay (1000000);
+ mdelay(1000);
} else if (speed == SPEED_10) {
uec_phy_write(mii_info, 0x14, 0x8e40);
uec_phy_write(mii_info, 0x1b, 0x800b);
uec_phy_write(mii_info, 0x14, 0x0c82);
uec_phy_write(mii_info, 0x00, 0x8100);
- udelay (1000000);
+ mdelay(1000);
}
}
diff --git a/drivers/rtc/ds1306.c b/drivers/rtc/ds1306.c
index 02d617e09c..1bd1151e1b 100644
--- a/drivers/rtc/ds1306.c
+++ b/drivers/rtc/ds1306.c
@@ -71,7 +71,7 @@ int rtc_get (struct rtc_time *tmp)
/* Now we can enable the DS1306 RTC */
immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay (10);
+ udelay(10);
/* Shift out the address (0) of the time in the Clock Chip */
soft_spi_send (0);
@@ -105,7 +105,7 @@ int rtc_get (struct rtc_time *tmp)
/* Now we can disable the DS1306 RTC */
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay (10);
+ udelay(10);
rtc_calc_weekday(tmp); /* Determine the day of week */
@@ -127,7 +127,7 @@ int rtc_set (struct rtc_time *tmp)
/* Now we can enable the DS1306 RTC */
immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay (10);
+ udelay(10);
/* First disable write protect in the clock chip control register */
soft_spi_send (0x8F); /* send address of the control register */
@@ -135,11 +135,11 @@ int rtc_set (struct rtc_time *tmp)
/* Now disable the DS1306 to terminate the write */
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE;
- udelay (10);
+ udelay(10);
/* Now enable the DS1306 to initiate a new write */
immap->im_cpm.cp_pbdat |= PB_SPI_CE;
- udelay (10);
+ udelay(10);
/* Next, send the address of the clock time write registers */
soft_spi_send (0x80); /* send address of the first time register */
@@ -156,11 +156,11 @@ int rtc_set (struct rtc_time *tmp)
/* Now we can disable the Clock chip to terminate the burst write */
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay (10);
+ udelay(10);
/* Now we can enable the Clock chip to initiate a new write */
immap->im_cpm.cp_pbdat |= PB_SPI_CE; /* Enable DS1306 Chip */
- udelay (10);
+ udelay(10);
/* First we Enable write protect in the clock chip control register */
soft_spi_send (0x8F); /* send address of the control register */
@@ -168,7 +168,7 @@ int rtc_set (struct rtc_time *tmp)
/* Now disable the DS1306 */
immap->im_cpm.cp_pbdat &= ~PB_SPI_CE; /* Disable DS1306 Chip */
- udelay (10);
+ udelay(10);
/* Set standard MPC8xx clock to the same time so Linux will
* see the time even if it doesn't have a DS1306 clock driver.
@@ -204,7 +204,7 @@ static void init_spi (void)
immap->im_cpm.cp_pbdir |= (PB_SPIMOSI | PB_SPI_CE | PB_SPISCK);
immap->im_cpm.cp_pbdir &= ~PB_SPIMISO; /* Make MISO pin an input */
- udelay (10);
+ udelay(10);
}
/* ------------------------------------------------------------------------- */
@@ -227,10 +227,10 @@ static void soft_spi_send (unsigned char n)
immap->im_cpm.cp_pbdat |= PB_SPIMOSI; /* Set MOSI to 1 */
else
immap->im_cpm.cp_pbdat &= ~PB_SPIMOSI; /* Set MOSI to 0 */
- udelay (10);
+ udelay(10);
immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay (10);
+ udelay(10);
bitpos >>= 1; /* Shift for next bit position */
}
@@ -253,11 +253,11 @@ static unsigned char soft_spi_read (void)
/* Read 8 bits here */
for (i = 0; i < 8; i++) { /* Do 8 bits in loop */
immap->im_cpm.cp_pbdat |= PB_SPISCK; /* Raise SCK */
- udelay (10);
+ udelay(10);
if (immap->im_cpm.cp_pbdat & PB_SPIMISO) /* Get a bit of data */
spi_byte |= bitpos; /* Set data accordingly */
immap->im_cpm.cp_pbdat &= ~PB_SPISCK; /* Lower SCK */
- udelay (10);
+ udelay(10);
bitpos >>= 1; /* Shift for next bit position */
}
diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c
index 301c1f0df1..a3a7a8dd98 100644
--- a/drivers/video/mb862xx.c
+++ b/drivers/video/mb862xx.c
@@ -79,7 +79,7 @@ static void gdc_sw_reset (void)
GraphicDevice *dev = &mb862xx;
HOST_WR_REG (GC_SRST, 0x1);
- udelay (500);
+ udelay(500);
video_hw_init ();
}
@@ -222,9 +222,9 @@ unsigned int pci_video_init (void)
/* Setup clocks and memory mode for Coral-P(A) */
HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF);
- udelay (200);
+ udelay(200);
HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR);
- udelay (100);
+ udelay(100);
return dev->frameAdrs;
}
diff --git a/examples/standalone/smc91111_eeprom.c b/examples/standalone/smc91111_eeprom.c
index a43d14f396..631b1b04d6 100644
--- a/examples/standalone/smc91111_eeprom.c
+++ b/examples/standalone/smc91111_eeprom.c
@@ -237,7 +237,7 @@ void copy_from_eeprom (struct eth_device *dev)
CTL_RELOAD, CTL_REG);
i = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i)
- udelay (100);
+ udelay(100);
if (i == 0) {
printf ("Timeout Refreshing EEPROM registers\n");
} else {
@@ -318,7 +318,7 @@ int read_eeprom_reg (struct eth_device *dev, int reg)
CTL_RELOAD, CTL_REG);
timeout = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay (100);
+ udelay(100);
if (timeout == 0) {
printf ("Timeout Reading EEPROM register %02x\n", reg);
return 0;
@@ -341,7 +341,7 @@ int write_eeprom_reg (struct eth_device *dev, int value, int reg)
CTL_STORE, CTL_REG);
timeout = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay (100);
+ udelay(100);
if (timeout == 0) {
printf ("Timeout Writing EEPROM register %02x\n", reg);
return 0;
diff --git a/lib/time.c b/lib/time.c
index 3d6447d7c0..551698e36d 100644
--- a/lib/time.c
+++ b/lib/time.c
@@ -183,7 +183,7 @@ void udelay(unsigned long usec)
do {
WATCHDOG_RESET();
kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec;
- __udelay (kv);
+ __udelay(kv);
usec -= kv;
} while(usec);
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-27 03:34:36 +0000