diff options
136 files changed, 1760 insertions, 496 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 196d635bdd..fc4fad46ee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -241,6 +241,9 @@ F: include/dt-bindings/clock/qcom,ipq4019-gcc.h F: include/dt-bindings/reset/qcom,ipq4019-reset.h F: drivers/reset/reset-ipq4019.c F: drivers/phy/phy-qcom-ipq4019-usb.c +F: drivers/spi/spi-qup.c +F: drivers/net/mdio-ipq4019.c +F: drivers/rng/msm_rng.c ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X ARMADA-37XX ARMADA-7K/8K M: Stefan Roese <sr@denx.de> @@ -860,13 +860,13 @@ else BOARD_SIZE_CHECK = endif -ifneq ($(CONFIG_SPL_SIZE_LIMIT),0) +ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0) SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) else SPL_SIZE_CHECK = endif -ifneq ($(CONFIG_TPL_SIZE_LIMIT),0) +ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0) TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT)) else TPL_SIZE_CHECK = @@ -51,31 +51,28 @@ In case you have questions about, problems with or contributions for U-Boot, you should send a message to the U-Boot mailing list at <u-boot@lists.denx.de>. There is also an archive of previous traffic on the mailing list - please search the archive before asking FAQ's. -Please see http://lists.denx.de/pipermail/u-boot and -http://dir.gmane.org/gmane.comp.boot-loaders.u-boot - +Please see https://lists.denx.de/pipermail/u-boot and +https://marc.info/?l=u-boot Where to get source code: ========================= The U-Boot source code is maintained in the Git repository at -git://www.denx.de/git/u-boot.git ; you can browse it online at -http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=summary +https://gitlab.denx.de/u-boot/u-boot.git ; you can browse it online at +https://gitlab.denx.de/u-boot/u-boot -The "snapshot" links on this page allow you to download tarballs of +The "Tags" links on this page allow you to download tarballs of any version you might be interested in. Official releases are also -available for FTP download from the ftp://ftp.denx.de/pub/u-boot/ -directory. - -Pre-built (and tested) images are available from -ftp://ftp.denx.de/pub/u-boot/images/ +available from the DENX file server through HTTPS or FTP. +https://ftp.denx.de/pub/u-boot/ +ftp://ftp.denx.de/pub/u-boot/ Where we come from: =================== - start from 8xxrom sources -- create PPCBoot project (http://sourceforge.net/projects/ppcboot) +- create PPCBoot project (https://sourceforge.net/projects/ppcboot) - clean up code - make it easier to add custom boards - make it possible to add other [PowerPC] CPUs @@ -84,10 +81,10 @@ Where we come from: * S-Record download * network boot * ATA disk / SCSI ... boot -- create ARMBoot project (http://sourceforge.net/projects/armboot) +- create ARMBoot project (https://sourceforge.net/projects/armboot) - add other CPU families (starting with ARM) -- create U-Boot project (http://sourceforge.net/projects/u-boot) -- current project page: see http://www.denx.de/wiki/U-Boot +- create U-Boot project (https://sourceforge.net/projects/u-boot) +- current project page: see https://www.denx.de/wiki/U-Boot Names and Spelling: @@ -139,12 +136,12 @@ Directory Hierarchy: /mips Files generic to MIPS architecture /nds32 Files generic to NDS32 architecture /nios2 Files generic to Altera NIOS2 architecture - /openrisc Files generic to OpenRISC architecture /powerpc Files generic to PowerPC architecture /riscv Files generic to RISC-V architecture /sandbox Files generic to HW-independent "sandbox" /sh Files generic to SH architecture /x86 Files generic to x86 architecture + /xtensa Files generic to Xtensa architecture /api Machine/arch independent API for external apps /board Board dependent files /cmd U-Boot commands functions @@ -154,6 +151,7 @@ Directory Hierarchy: /doc Documentation (don't expect too much) /drivers Commonly used device drivers /dts Contains Makefile for building internal U-Boot fdt. +/env Environment files /examples Example code for standalone applications, etc. /fs Filesystem code (cramfs, ext2, jffs2, etc.) /include Header Files @@ -212,7 +210,7 @@ board. This allows feature development which is not board- or architecture- specific to be undertaken on a native platform. The sandbox is also used to run some of U-Boot's tests. -See doc/arch/index.rst for more details. +See doc/arch/sandbox.rst for more details. Board Initialisation Flow: @@ -608,7 +606,7 @@ The following options need to be configured: This setting is mandatory for all boards that have only one machine type and must be used to specify the machine type number as it appears in the ARM machine registry - (see http://www.arm.linux.org.uk/developer/machines/). + (see https://www.arm.linux.org.uk/developer/machines/). Only boards that have multiple machine types supported in a single configuration file and the machine type is runtime discoverable, do not have to use this setting. @@ -620,7 +618,7 @@ The following options need to be configured: serverip, gatewayip, hostname, othbootargs. It loads the vxWorks image pointed bootfile. - Note: If a "bootargs" environment is defined, it will overwride + Note: If a "bootargs" environment is defined, it will override the defaults discussed just above. - Cache Configuration: @@ -3021,7 +3019,7 @@ Building U-Boot has been tested in several native build environments and in many different cross environments. Of course we cannot support all possibly existing versions of cross development tools in all (potentially obsolete) versions. In case of tool chain problems we -recommend to use the ELDK (see http://www.denx.de/wiki/DULG/ELDK) +recommend to use the ELDK (see https://www.denx.de/wiki/DULG/ELDK) which is extensively used to build and test U-Boot. If you are not using a native environment, it is assumed that you @@ -4175,7 +4173,7 @@ consider minicom to be broken, and recommend not to use it. Under Unix, I recommend to use C-Kermit for general purpose use (and especially for kermit binary protocol download ("loadb" command), and use "cu" for S-Record download ("loads" command). See -http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. +https://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. for help with kermit. @@ -4343,7 +4341,7 @@ On ARM, the following registers are used: Note: on ARM, only R_ARM_RELATIVE relocations are supported. On Nios II, the ABI is documented here: - http://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf + https://www.altera.com/literature/hb/nios2/n2cpu_nii51016.pdf ==> U-Boot will use gp to hold a pointer to the global data @@ -4494,7 +4492,7 @@ int main(int argc, char *argv[]) while (learning) { Read the README file in the top level directory; - Read http://www.denx.de/twiki/bin/view/DULG/Manual; + Read https://www.denx.de/wiki/bin/view/DULG/Manual; Read applicable doc/README.*; Read the source, Luke; /* find . -name "*.[chS]" | xargs grep -i <keyword> */ @@ -4575,7 +4573,7 @@ Since the number of patches for U-Boot is growing, we need to establish some rules. Submissions which do not conform to these rules may be rejected, even when they contain important and valuable stuff. -Please see http://www.denx.de/wiki/U-Boot/Patches for details. +Please see https://www.denx.de/wiki/U-Boot/Patches for details. Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>; see https://lists.denx.de/listinfo/u-boot @@ -57,7 +57,7 @@ static int API_getc(va_list ap) if ((c = (int *)va_arg(ap, uintptr_t)) == NULL) return API_EINVAL; - *c = getc(); + *c = getchar(); return 0; } diff --git a/arch/arm/dts/ast2500-u-boot.dtsi b/arch/arm/dts/ast2500-u-boot.dtsi index 51a5244766..ea60e4c8db 100644 --- a/arch/arm/dts/ast2500-u-boot.dtsi +++ b/arch/arm/dts/ast2500-u-boot.dtsi @@ -16,7 +16,6 @@ rst: reset-controller { u-boot,dm-pre-reloc; compatible = "aspeed,ast2500-reset"; - aspeed,wdt = <&wdt1>; #reset-cells = <1>; }; @@ -27,7 +26,7 @@ 0x1e6e0200 0x1d4 >; #reset-cells = <1>; clocks = <&scu ASPEED_CLK_MPLL>; - resets = <&rst AST_RESET_SDRAM>; + resets = <&rst ASPEED_RESET_SDRAM>; }; ahb { @@ -41,7 +40,7 @@ reg = <0x1e740100>; #reset-cells = <1>; clocks = <&scu ASPEED_CLK_SDIO>; - resets = <&rst AST_RESET_SDIO>; + resets = <&rst ASPEED_RESET_SDIO>; }; sdhci1: sdhci@1e740200 { @@ -49,7 +48,7 @@ reg = <0x1e740200>; #reset-cells = <1>; clocks = <&scu ASPEED_CLK_SDIO>; - resets = <&rst AST_RESET_SDIO>; + resets = <&rst ASPEED_RESET_SDIO>; }; }; diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index e0e4188e5d..7a52ea2c4e 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -22,6 +22,7 @@ aliases { serial0 = &blsp1_uart1; + spi0 = &blsp1_spi1; }; reserved-memory { @@ -59,6 +60,13 @@ u-boot,dm-pre-reloc; }; + rng: rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + status = "disabled"; + }; + reset: gcc-reset@1800000 { compatible = "qcom,gcc-reset-ipq4019"; reg = <0x1800000 0x60000>; @@ -89,6 +97,45 @@ gpio-count = <100>; gpio-bank-name="soc"; #gpio-cells = <2>; + u-boot,dm-pre-reloc; + }; + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + u-boot,dm-pre-reloc; + }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq4019-mdio"; + reg = <0x90000 0x64>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; }; usb3_ss_phy: ssphy@9a000 { diff --git a/arch/arm/dts/socfpga_arria5_secu1.dts b/arch/arm/dts/socfpga_arria5_secu1.dts index 820e29ad6d..cfe3e67df4 100644 --- a/arch/arm/dts/socfpga_arria5_secu1.dts +++ b/arch/arm/dts/socfpga_arria5_secu1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2016-2020 ABB + * Copyright (C) 2016-2020 Hitachi Power Grids */ #include "socfpga_arria5.dtsi" @@ -8,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "ABB SoC SECU1 Board"; + model = "Hitachi PG SoC SECU1 Board"; compatible = "altr,socfpga-secu1", "altr,socfpga"; chosen { diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index a4fd077079..121ccfcc60 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -19,4 +19,10 @@ int HYPERVISOR_sched_op(int cmd, void *arg); int HYPERVISOR_event_channel_op(int cmd, void *arg); unsigned long HYPERVISOR_hvm_op(int op, void *arg); int HYPERVISOR_memory_op(unsigned int cmd, void *arg); + +static inline void xen_debug_putc(int c) +{ + register int v __asm__ ("x0") = c; + __asm__ __volatile__("hvc 0xfffe" : "=r" (v) : "0" (v)); +} #endif /* _ASM_ARM_XEN_HYPERCALL_H */ diff --git a/arch/arm/mach-ipq40xx/clock-ipq4019.c b/arch/arm/mach-ipq40xx/clock-ipq4019.c index 83a688e625..31ae9719e8 100644 --- a/arch/arm/mach-ipq40xx/clock-ipq4019.c +++ b/arch/arm/mach-ipq40xx/clock-ipq4019.c @@ -2,7 +2,7 @@ /* * Clock drivers for Qualcomm IPQ40xx * - * Copyright (c) 2019 Sartura Ltd. + * Copyright (c) 2020 Sartura Ltd. * * Author: Robert Marko <robert.marko@sartura.hr> * @@ -24,7 +24,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate) switch (clk->id) { case GCC_BLSP1_UART1_APPS_CLK: /*UART1*/ /* This clock is already initialized by SBL1 */ - return 0; + return 0; break; default: return 0; @@ -47,8 +47,25 @@ static ulong msm_clk_set_rate(struct clk *clk, ulong rate) return msm_set_rate(clk, rate); } +static int msm_enable(struct clk *clk) +{ + switch (clk->id) { + case GCC_BLSP1_QUP1_SPI_APPS_CLK: /*SPI1*/ + /* This clock is already initialized by SBL1 */ + return 0; + break; + case GCC_PRNG_AHB_CLK: /*PRNG*/ + /* This clock is already initialized by SBL1 */ + return 0; + break; + default: + return 0; + } +} + static struct clk_ops msm_clk_ops = { .set_rate = msm_clk_set_rate, + .enable = msm_enable, }; static const struct udevice_id msm_clk_ids[] = { diff --git a/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c b/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c index 06a57f2e5e..3e365f8cc8 100644 --- a/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c +++ b/arch/arm/mach-ipq40xx/pinctrl-ipq4019.c @@ -18,6 +18,13 @@ static const struct pinctrl_function msm_pinctrl_functions[] = { {"blsp_uart0_0", 1}, /* Only for GPIO:16,17 */ {"blsp_uart0_1", 2}, /* Only for GPIO:60,61 */ {"blsp_uart1", 1}, + {"blsp_spi0_0", 1}, /* Only for GPIO:12,13,14,15 */ + {"blsp_spi0_1", 2}, /* Only for GPIO:54,55,56,57 */ + {"blsp_spi1", 2}, + {"mdio_0", 1}, /* Only for GPIO6 */ + {"mdio_1", 2}, /* Only for GPIO53 */ + {"mdc_0", 1}, /* Only for GPIO7 */ + {"mdc_1", 2}, /* Only for GPIO52 */ }; static const char *ipq4019_get_function_name(struct udevice *dev, diff --git a/arch/powerpc/dts/km8309-uboot.dtsi b/arch/powerpc/dts/km8309-uboot.dtsi index c44ce7d8dc..a93bdb2d00 100644 --- a/arch/powerpc/dts/km8309-uboot.dtsi +++ b/arch/powerpc/dts/km8309-uboot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA 8309 U-Boot specific Device Tree Source parts + * Hitachi Power Grids 8309 U-Boot specific Device Tree Source parts * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/km8321-uboot.dtsi b/arch/powerpc/dts/km8321-uboot.dtsi index 348826057a..fd11fe63e0 100644 --- a/arch/powerpc/dts/km8321-uboot.dtsi +++ b/arch/powerpc/dts/km8321-uboot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA 8321 U-Boot specific Device Tree Source parts + * Hitachi Power Grids 8321 U-Boot specific Device Tree Source parts * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/km8321.dtsi b/arch/powerpc/dts/km8321.dtsi index e49361359d..6c36017563 100644 --- a/arch/powerpc/dts/km8321.dtsi +++ b/arch/powerpc/dts/km8321.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA km8321 common ports Device Tree Source + * Hitachi Power Grids km8321 common ports Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/km836x-uboot.dtsi b/arch/powerpc/dts/km836x-uboot.dtsi index ac5339eff6..5c78529c44 100644 --- a/arch/powerpc/dts/km836x-uboot.dtsi +++ b/arch/powerpc/dts/km836x-uboot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA km836x U-Boot specific Device Tree Source parts + * Hitachi Power Grids km836x U-Boot specific Device Tree Source parts * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/km836x.dtsi b/arch/powerpc/dts/km836x.dtsi index a8c83fc7e3..94b71cdcaa 100644 --- a/arch/powerpc/dts/km836x.dtsi +++ b/arch/powerpc/dts/km836x.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA km836x common ports Device Tree Source + * Hitachi Power Grids km836x common ports Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/kmcoge5ne-uboot.dtsi b/arch/powerpc/dts/kmcoge5ne-uboot.dtsi index 6a5e74f434..69392bbab0 100644 --- a/arch/powerpc/dts/kmcoge5ne-uboot.dtsi +++ b/arch/powerpc/dts/kmcoge5ne-uboot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA kmcoge5ne U-Boot specific Device Tree Source parts + * Hitachi Power Grids kmcoge5ne U-Boot specific Device Tree Source parts * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/kmcoge5ne.dts b/arch/powerpc/dts/kmcoge5ne.dts index 467e5bd9d2..0dad793b6a 100644 --- a/arch/powerpc/dts/kmcoge5ne.dts +++ b/arch/powerpc/dts/kmcoge5ne.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA KMCOGE5ne Device Tree Source + * Hitachi Power Grids KMCOGE5ne Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "kmcoge5ne"; - compatible = "ABB,kmcoge5ne"; + compatible = "hitachi,kmcoge5ne"; aliases { ethernet0 = &enet_admin; diff --git a/arch/powerpc/dts/kmeter1-uboot.dtsi b/arch/powerpc/dts/kmeter1-uboot.dtsi index 898fa7dc7a..5f63994aa2 100644 --- a/arch/powerpc/dts/kmeter1-uboot.dtsi +++ b/arch/powerpc/dts/kmeter1-uboot.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA kmeter1 U-Boot specific Device Tree Source parts + * Hitachi Power Grids kmeter1 U-Boot specific Device Tree Source parts * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * diff --git a/arch/powerpc/dts/kmeter1.dts b/arch/powerpc/dts/kmeter1.dts index f1f79952ab..a62ee18bb7 100644 --- a/arch/powerpc/dts/kmeter1.dts +++ b/arch/powerpc/dts/kmeter1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA KMETER1 Device Tree Source + * Hitachi Power Grids KMETER1 Device Tree Source * * 2008-2011 DENX Software Engineering GmbH * Copyright (C) 2020 Heiko Schocher <hs@denx.de> @@ -12,7 +12,7 @@ / { model = "KMETER1"; - compatible = "ABB,KMETER1"; + compatible = "keymile,KMETER1"; aliases { ethernet0 = &enet_piggy2; diff --git a/arch/powerpc/dts/kmopti2.dts b/arch/powerpc/dts/kmopti2.dts index 23e31872dd..b2d9f0fa75 100644 --- a/arch/powerpc/dts/kmopti2.dts +++ b/arch/powerpc/dts/kmopti2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA OPTI2 Device Tree Source + * Hitachi Power Grids OPTI2 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "KMOPTI2"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmsupc5.dts b/arch/powerpc/dts/kmsupc5.dts index 60ca0d3324..9736c18401 100644 --- a/arch/powerpc/dts/kmsupc5.dts +++ b/arch/powerpc/dts/kmsupc5.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA SUPC5 Device Tree Source + * Hitachi Power Grids SUPC5 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "SUPC5"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmsupm5.dts b/arch/powerpc/dts/kmsupm5.dts index 1cd11c3344..0687b4dea4 100644 --- a/arch/powerpc/dts/kmsupm5.dts +++ b/arch/powerpc/dts/kmsupm5.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA SUPM5 Device Tree Source + * Hitachi Power Grids SUPM5 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "SUPM5"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmtegr1.dts b/arch/powerpc/dts/kmtegr1.dts index c9b21cf500..d40d9716e5 100644 --- a/arch/powerpc/dts/kmtegr1.dts +++ b/arch/powerpc/dts/kmtegr1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA TEGR1 Device Tree Source + * Hitachi Power Grids TEGR1 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -10,7 +10,7 @@ / { model = "KMTEGR1"; - compatible = "ABB,kmpbec8309"; + compatible = "hitachi,kmpbec8309"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmtepr2.dts b/arch/powerpc/dts/kmtepr2.dts index 5a272ec6cb..7cf6aefe57 100644 --- a/arch/powerpc/dts/kmtepr2.dts +++ b/arch/powerpc/dts/kmtepr2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA TEPR2 Device Tree Source + * Hitachi Power Grids TEPR2 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "KMTEPR2"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmtuge1.dts b/arch/powerpc/dts/kmtuge1.dts index 8a7b5a42cb..41bb3623fb 100644 --- a/arch/powerpc/dts/kmtuge1.dts +++ b/arch/powerpc/dts/kmtuge1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA TUGE1 Device Tree Source + * Hitachi Power Grids TUGE1 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "TUGE1"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/dts/kmtuxa1.dts b/arch/powerpc/dts/kmtuxa1.dts index c2681c5efb..8b06a18f54 100644 --- a/arch/powerpc/dts/kmtuxa1.dts +++ b/arch/powerpc/dts/kmtuxa1.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * ABB PGGA TUXA1 Device Tree Source + * Hitachi Power Grids TUXA1 Device Tree Source * * Copyright (C) 2020 Heiko Schocher <hs@denx.de> * @@ -12,7 +12,7 @@ / { model = "TUXA1"; - compatible = "ABB,kmpbec8321"; + compatible = "hitachi,kmpbec8321"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/riscv/lib/andes_plmt.c b/arch/riscv/lib/andes_plmt.c index a28c14c1eb..cec86718c7 100644 --- a/arch/riscv/lib/andes_plmt.c +++ b/arch/riscv/lib/andes_plmt.c @@ -17,11 +17,9 @@ /* mtime register */ #define MTIME_REG(base) ((ulong)(base)) -static int andes_plmt_get_count(struct udevice *dev, u64 *count) +static u64 andes_plmt_get_count(struct udevice *dev) { - *count = readq((void __iomem *)MTIME_REG(dev->priv)); - - return 0; + return readq((void __iomem *)MTIME_REG(dev->priv)); } static const struct timer_ops andes_plmt_ops = { diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c index c9704c596f..a5572cb825 100644 --- a/arch/riscv/lib/sifive_clint.c +++ b/arch/riscv/lib/sifive_clint.c @@ -62,11 +62,9 @@ int riscv_get_ipi(int hart, int *pending) return 0; } -static int sifive_clint_get_count(struct udevice *dev, u64 *count) +static u64 sifive_clint_get_count(struct udevice *dev) { - *count = readq((void __iomem *)MTIME_REG(dev->priv)); - - return 0; + return readq((void __iomem *)MTIME_REG(dev->priv)); } static const struct timer_ops sifive_clint_ops = { diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index e20c017436..e5906906f3 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -37,26 +37,20 @@ config KM_RESERVED_PRAM config KM_CRAMFS_ADDR hex "CRAMFS Address" - default 0x2400000 if ARCH_KIRKWOOD - default 0xC00000 if MPC83xx - default 0x2000000 if MPC85xx + default 0x3000000 depends on !ARCH_SOCFPGA help Start address of the CRAMFS containing the Linux kernel. config KM_KERNEL_ADDR hex "Kernel Load Address" - default 0x2000000 if ARCH_KIRKWOOD - default 0x400000 if MPC83xx - default 0x1000000 if MPC85xx || ARCH_SOCFPGA + default 0x2000000 help Address where to load Linux kernel in RAM. config KM_FDT_ADDR hex "FDT Load Address" - default 0x23E0000 if ARCH_KIRKWOOD || ARCH_SOCFPGA - default 0xB80000 if MPC83xx - default 0x1F80000 if MPC85xx + default 0x2FC0000 help Address where to load flattened device tree in RAM. diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 8669715940..9eb000cca4 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -185,7 +185,7 @@ int dram_init(void) int checkboard(void) { - puts("Board: ABB " CONFIG_SYS_CONFIG_NAME); + puts("Board: Hitachi " CONFIG_SYS_CONFIG_NAME); if (piggy_present()) puts(" with PIGGY."); diff --git a/board/keymile/secu1/MAINTAINERS b/board/keymile/secu1/MAINTAINERS index 6ef1528412..3e40eef3cc 100644 --- a/board/keymile/secu1/MAINTAINERS +++ b/board/keymile/secu1/MAINTAINERS @@ -1,4 +1,4 @@ -ABB SECU1 BOARD +Hitachi Power Grids SECU1 BOARD M: Holger Brunck <holger.brunck@hitachi-powergrids.com> S: Maintained F: include/configs/socfpga_arria5_secu1.h diff --git a/board/keymile/secu1/Makefile b/board/keymile/secu1/Makefile index 4704d59e48..69531807ec 100644 --- a/board/keymile/secu1/Makefile +++ b/board/keymile/secu1/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2020 ABB +# (C) Copyright 2020 Hitachi Power Grids # # SPDX-License-Identifier: GPL-2.0+ # diff --git a/board/keymile/secu1/socfpga.c b/board/keymile/secu1/socfpga.c index dc04a21abe..6a4cb21786 100644 --- a/board/keymile/secu1/socfpga.c +++ b/board/keymile/secu1/socfpga.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2017-2020 ABB + * Copyright (C) 2017-2020 Hitachi Power Grids */ #include <common.h> #include <i2c.h> diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c index 18efe25751..1ba7b622e5 100644 --- a/cmd/bootmenu.c +++ b/cmd/bootmenu.c @@ -99,7 +99,7 @@ static void bootmenu_autoboot_loop(struct bootmenu_data *menu, } menu->delay = -1; - c = getc(); + c = getchar(); switch (c) { case '\e': @@ -141,7 +141,7 @@ static void bootmenu_loop(struct bootmenu_data *menu, mdelay(10); } - c = getc(); + c = getchar(); switch (*esc) { case 0: diff --git a/cmd/load.c b/cmd/load.c index 63a9414543..9a3a16979c 100644 --- a/cmd/load.c +++ b/cmd/load.c @@ -81,7 +81,7 @@ static int do_load_serial(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == '\r') + if (getchar() == '\r') break; } } @@ -102,7 +102,7 @@ static int do_load_serial(struct cmd_tbl *cmdtp, int flag, int argc, */ for (i=0; i<100; ++i) { if (tstc()) { - (void) getc(); + getchar(); } udelay(1000); } @@ -124,7 +124,7 @@ static int do_load_serial(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == 0x1B) /* ESC */ + if (getchar() == 0x1B) /* ESC */ break; } } @@ -212,7 +212,7 @@ static int read_record(char *buf, ulong len) --len; /* always leave room for terminating '\0' byte */ for (p=buf; p < buf+len; ++p) { - c = getc(); /* read character */ + c = getchar(); /* read character */ if (do_echo) putc(c); /* ... and echo it */ @@ -229,7 +229,7 @@ static int read_record(char *buf, ulong len) } /* Check for the console hangup (if any different from serial) */ - if (gd->jt->getc != getc) { + if (gd->jt->getc != getchar) { if (ctrlc()) { return (-1); } @@ -276,7 +276,7 @@ int do_save_serial(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == '\r') + if (getchar() == '\r') break; } } @@ -288,7 +288,7 @@ int do_save_serial(struct cmd_tbl *cmdtp, int flag, int argc, printf("## Ready for S-Record upload, press ENTER to proceed ...\n"); for (;;) { - if (getc() == '\r') + if (getchar() == '\r') break; } if (save_serial(offset, size)) { @@ -305,7 +305,7 @@ int do_save_serial(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == 0x1B) /* ESC */ + if (getchar() == 0x1B) /* ESC */ break; } } @@ -459,7 +459,7 @@ static int do_load_serial_bin(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == '\r') + if (getchar() == '\r') break; } } @@ -505,7 +505,7 @@ static int do_load_serial_bin(struct cmd_tbl *cmdtp, int flag, int argc, serial_setbrg(); udelay(50000); for (;;) { - if (getc() == 0x1B) /* ESC */ + if (getchar() == 0x1B) /* ESC */ break; } } @@ -528,7 +528,7 @@ static ulong load_serial_bin(ulong offset) */ for (i=0; i<100; ++i) { if (tstc()) { - (void) getc(); + getchar(); } udelay(1000); } @@ -831,7 +831,7 @@ static int k_recv(void) /* get a packet */ /* wait for the starting character or ^C */ for (;;) { - switch (getc ()) { + switch (getchar()) { case START_CHAR: /* start packet */ goto START; case ETX_CHAR: /* ^C waiting for packet */ @@ -843,13 +843,13 @@ static int k_recv(void) START: /* get length of packet */ sum = 0; - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; length = untochar(new_char); /* get sequence number */ - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -876,7 +876,7 @@ START: /* END NEW CODE */ /* get packet type */ - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -886,19 +886,19 @@ START: if (length == -2) { /* (length byte was 0, decremented twice) */ /* get the two length bytes */ - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; len_hi = untochar(new_char); - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; len_lo = untochar(new_char); length = len_hi * 95 + len_lo; /* check header checksum */ - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) @@ -908,7 +908,7 @@ START: } /* bring in rest of packet */ while (length > 1) { - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -925,13 +925,13 @@ START: } } /* get and validate checksum character */ - new_char = getc(); + new_char = getchar(); if ((new_char & 0xE0) == 0) goto packet_error; if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) goto packet_error; /* get END_CHAR */ - new_char = getc(); + new_char = getchar(); if (new_char != END_CHAR) { packet_error: /* restore state machines */ @@ -955,7 +955,7 @@ START: static int getcxmodem(void) { if (tstc()) - return (getc()); + return (getchar()); return -1; } static ulong load_serial_ymodem(ulong offset, int mode) diff --git a/common/Kconfig.boot b/common/Kconfig.boot index 4191bfb34d..522f5f3d6a 100644 --- a/common/Kconfig.boot +++ b/common/Kconfig.boot @@ -880,7 +880,7 @@ config USE_PREBOOT config PREBOOT string "preboot default value" depends on USE_PREBOOT && !USE_DEFAULT_ENV_FILE - default "usb start" if USB_KEYBOARD || USB_STORAGE + default "usb start" if USB_KEYBOARD default "" help This is the default of "preboot" environment variable. diff --git a/common/autoboot.c b/common/autoboot.c index 6d78716a26..e628baffb8 100644 --- a/common/autoboot.c +++ b/common/autoboot.c @@ -117,7 +117,7 @@ static int passwd_abort_sha256(uint64_t etime) return 0; } - presskey[presskey_len++] = getc(); + presskey[presskey_len++] = getchar(); /* Calculate sha256 upon each new char */ hash_block(algo_name, (const void *)presskey, @@ -189,12 +189,12 @@ static int passwd_abort_key(uint64_t etime) do { if (tstc()) { if (presskey_len < presskey_max) { - presskey[presskey_len++] = getc(); + presskey[presskey_len++] = getchar(); } else { for (i = 0; i < presskey_max - 1; i++) presskey[i] = presskey[i + 1]; - presskey[i] = getc(); + presskey[i] = getchar(); } } @@ -257,7 +257,7 @@ static int abortboot_single_key(int bootdelay) * Check if key already pressed */ if (tstc()) { /* we got a key press */ - (void) getc(); /* consume input */ + getchar(); /* consume input */ puts("\b\b\b 0"); abort = 1; /* don't auto boot */ } @@ -272,7 +272,7 @@ static int abortboot_single_key(int bootdelay) abort = 1; /* don't auto boot */ bootdelay = 0; /* no more delay */ - key = getc(); /* consume input */ + key = getchar();/* consume input */ if (IS_ENABLED(CONFIG_USE_AUTOBOOT_MENUKEY)) menukey = key; break; @@ -363,7 +363,8 @@ void autoboot_command(const char *s) { debug("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>"); - if (stored_bootdelay != -1 && s && !abortboot(stored_bootdelay)) { + if (s && (stored_bootdelay == -2 || + (stored_bootdelay != -1 && !abortboot(stored_bootdelay)))) { bool lock; int prev; diff --git a/common/board_f.c b/common/board_f.c index 62473abf79..9f441c44f1 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -392,6 +392,8 @@ static int reserve_video(void) ret = video_reserve(&addr); if (ret) return ret; + debug("Reserving %luk for video at: %08lx\n", + (unsigned long)gd->relocaddr - addr, addr); gd->relocaddr = addr; #elif defined(CONFIG_LCD) # ifdef CONFIG_FB_ADDR @@ -573,7 +575,9 @@ static int reserve_stacks(void) static int reserve_bloblist(void) { #ifdef CONFIG_BLOBLIST - gd->start_addr_sp = reserve_stack_aligned(CONFIG_BLOBLIST_SIZE); + /* Align to a 4KB boundary for easier reading of addresses */ + gd->start_addr_sp = ALIGN_DOWN(gd->start_addr_sp - CONFIG_BLOBLIST_SIZE, + 0x1000); gd->new_bloblist = map_sysmem(gd->start_addr_sp, CONFIG_BLOBLIST_SIZE); #endif diff --git a/common/cli_hush.c b/common/cli_hush.c index 5b1f119074..66995c255b 100644 --- a/common/cli_hush.c +++ b/common/cli_hush.c @@ -2170,14 +2170,6 @@ int set_local_var(const char *s, int flg_export) name=strdup(s); -#ifdef __U_BOOT__ - if (env_get(name) != NULL) { - printf ("ERROR: " - "There is a global environment variable with the same name.\n"); - free(name); - return -1; - } -#endif /* Assume when we enter this function that we are already in * NAME=VALUE format. So the first order of business is to * split 's' on the '=' into 'name' and 'value' */ diff --git a/common/cli_readline.c b/common/cli_readline.c index 1f1e28c6d8..47b876285c 100644 --- a/common/cli_readline.c +++ b/common/cli_readline.c @@ -68,7 +68,7 @@ static char *delete_char (char *buffer, char *p, int *colp, int *np, int plen) #define CREAD_HIST_CHAR ('!') #define getcmd_putch(ch) putc(ch) -#define getcmd_getch() getc() +#define getcmd_getch() getchar() #define getcmd_cbeep() getcmd_putch('\a') #define HIST_MAX 20 @@ -571,7 +571,7 @@ int cli_readline_into_buffer(const char *const prompt, char *buffer, return -2; /* timed out */ WATCHDOG_RESET(); /* Trigger watchdog, if needed */ - c = getc(); + c = getchar(); /* * Special character handling diff --git a/common/console.c b/common/console.c index 8e50af1f9d..3348436da6 100644 --- a/common/console.c +++ b/common/console.c @@ -131,7 +131,7 @@ static int console_setfile(int file, struct stdio_dev * dev) */ switch (file) { case stdin: - gd->jt->getc = getc; + gd->jt->getc = getchar; gd->jt->tstc = tstc; break; case stdout: @@ -179,7 +179,7 @@ struct stdio_dev **console_devices[MAX_FILES]; int cd_count[MAX_FILES]; /* - * This depends on tstc() always being called before getc(). + * This depends on tstc() always being called before getchar(). * This is guaranteed to be true because this routine is called * only from fgetc() which assures it. * No attempt is made to demultiplex multiple input sources. @@ -404,7 +404,7 @@ int fprintf(int file, const char *fmt, ...) /** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/ -int getc(void) +int getchar(void) { #ifdef CONFIG_DISABLE_CONSOLE if (gd->flags & GD_FLG_DISABLE_CONSOLE) @@ -663,7 +663,7 @@ int ctrlc(void) { if (!ctrlc_disabled && gd->have_console) { if (tstc()) { - switch (getc()) { + switch (getchar()) { case 0x03: /* ^C - Control C */ ctrlc_was_pressed = 1; return 1; @@ -685,10 +685,10 @@ int confirm_yesno(void) /* Flush input */ while (tstc()) - getc(); + getchar(); i = 0; while (i < sizeof(str_input)) { - str_input[i] = getc(); + str_input[i] = getchar(); putc(str_input[i]); if (str_input[i] == '\r') break; diff --git a/common/image.c b/common/image.c index 645bfef169..451fc689a8 100644 --- a/common/image.c +++ b/common/image.c @@ -801,14 +801,14 @@ static const char *unknown_msg(enum ih_category category) } /** - * get_cat_table_entry_name - translate entry id to long name + * genimg_get_cat_name - translate entry id to long name * @category: category to look up (enum ih_category) * @id: entry id to be translated * * This will scan the translation table trying to find the entry that matches * the given id. * - * @retur long entry name if translation succeeds; error string on failure + * @return long entry name if translation succeeds; error string on failure */ const char *genimg_get_cat_name(enum ih_category category, uint id) { @@ -825,14 +825,14 @@ const char *genimg_get_cat_name(enum ih_category category, uint id) } /** - * get_cat_table_entry_short_name - translate entry id to short name + * genimg_get_cat_short_name - translate entry id to short name * @category: category to look up (enum ih_category) * @id: entry id to be translated * * This will scan the translation table trying to find the entry that matches * the given id. * - * @retur short entry name if translation succeeds; error string on failure + * @return short entry name if translation succeeds; error string on failure */ const char *genimg_get_cat_short_name(enum ih_category category, uint id) { @@ -859,6 +859,24 @@ const char *genimg_get_cat_desc(enum ih_category category) } /** + * genimg_cat_has_id - check whether category has entry id + * @category: category to look up (enum ih_category) + * @id: entry id to be checked + * + * This will scan the translation table trying to find the entry that matches + * the given id. + * + * @return true if category has entry id; false if not + */ +bool genimg_cat_has_id(enum ih_category category, uint id) +{ + if (get_table_entry(table_info[category].table, id)) + return true; + + return false; +} + +/** * get_table_entry_name - translate entry id to long name * @table: pointer to a translation table for entries of a specific type * @msg: message to be returned when translation fails @@ -900,6 +918,12 @@ const char *genimg_get_type_name(uint8_t type) return (get_table_entry_name(uimage_type, "Unknown Image", type)); } +const char *genimg_get_comp_name(uint8_t comp) +{ + return (get_table_entry_name(uimage_comp, "Unknown Compression", + comp)); +} + static const char *genimg_get_short_name(const table_entry_t *table, int val) { table = get_table_entry(table, val); @@ -917,12 +941,6 @@ const char *genimg_get_type_short_name(uint8_t type) return genimg_get_short_name(uimage_type, type); } -const char *genimg_get_comp_name(uint8_t comp) -{ - return (get_table_entry_name(uimage_comp, "Unknown Compression", - comp)); -} - const char *genimg_get_comp_short_name(uint8_t comp) { return genimg_get_short_name(uimage_comp, comp); diff --git a/common/log.c b/common/log.c index 1b10f6f180..b7a6ebe298 100644 --- a/common/log.c +++ b/common/log.c @@ -21,6 +21,11 @@ static const char *log_cat_name[LOGC_COUNT - LOGC_NONE] = { "driver-model", "device-tree", "efi", + "alloc", + "sandbox", + "bloblist", + "devres", + "acpi", }; static const char *log_level_name[LOGL_COUNT] = { diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 620ea1e8b4..af47f5ce1c 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -37,9 +37,9 @@ config SPL_FRAMEWORK_BOARD_INIT_F config SPL_SIZE_LIMIT hex "Maximum size of SPL image" depends on SPL - default 69632 if ARCH_MX6 && !MX6_OCRAM_256KB - default 200704 if ARCH_MX6 && MX6_OCRAM_256KB - default 0 + default 0x11000 if ARCH_MX6 && !MX6_OCRAM_256KB + default 0x31000 if ARCH_MX6 && MX6_OCRAM_256KB + default 0x0 help Specifies the maximum length of the U-Boot SPL image. If this value is zero, it is ignored. @@ -1335,7 +1335,7 @@ if TPL config TPL_SIZE_LIMIT hex "Maximum size of TPL image" depends on TPL - default 0 + default 0x0 help Specifies the maximum length of the U-Boot TPL image. If this value is zero, it is ignored. diff --git a/common/spl/spl_ymodem.c b/common/spl/spl_ymodem.c index 284512478f..e979f780ad 100644 --- a/common/spl/spl_ymodem.c +++ b/common/spl/spl_ymodem.c @@ -32,7 +32,7 @@ struct ymodem_fit_info { static int getcymodem(void) { if (tstc()) - return (getc()); + return (getchar()); return -1; } diff --git a/common/xyzModem.c b/common/xyzModem.c index 6bf2375671..fc3459ebba 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -72,7 +72,7 @@ CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) } if (tstc ()) { - *c = getc (); + *c = getchar(); return 1; } return 0; diff --git a/configs/ethernut5_defconfig b/configs/ethernut5_defconfig index 9a07940278..9f57f34eab 100644 --- a/configs/ethernut5_defconfig +++ b/configs/ethernut5_defconfig @@ -66,6 +66,7 @@ CONFIG_SPI_FLASH_ATMEL=y CONFIG_SPI_FLASH_DATAFLASH=y CONFIG_PINCTRL=y CONFIG_PINCTRL_AT91=y +CONFIG_RTC_PCF8563=y CONFIG_DM_SERIAL=y CONFIG_ATMEL_USART=y CONFIG_SPI=y diff --git a/configs/firefly-rk3288_defconfig b/configs/firefly-rk3288_defconfig index dc290d5ec8..6c04123b2d 100644 --- a/configs/firefly-rk3288_defconfig +++ b/configs/firefly-rk3288_defconfig @@ -6,7 +6,7 @@ CONFIG_ENV_OFFSET=0x3F8000 CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_FIREFLY_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x80000 -CONFIG_SPL_SIZE_LIMIT=262144 +CONFIG_SPL_SIZE_LIMIT=0x40000 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-firefly" diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 383c8cd0e3..3f5824d76f 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -175,5 +175,6 @@ CONFIG_PHY_VITESSE=y CONFIG_MII=y CONFIG_TSEC_ENET=y # CONFIG_PCI is not set +CONFIG_RTC_PCF8563=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y diff --git a/configs/imxrt1020-evk_defconfig b/configs/imxrt1020-evk_defconfig index 61f99e9de6..9bddb69cd4 100644 --- a/configs/imxrt1020-evk_defconfig +++ b/configs/imxrt1020-evk_defconfig @@ -12,7 +12,7 @@ CONFIG_SPL_TEXT_BASE=0x20209000 CONFIG_TARGET_IMXRT1020_EVK=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_SIZE_LIMIT=131072 +CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="imxrt1020-evk" CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig index 7261382811..f639ea7623 100644 --- a/configs/imxrt1050-evk_defconfig +++ b/configs/imxrt1050-evk_defconfig @@ -14,7 +14,7 @@ CONFIG_SPL_TEXT_BASE=0x20209000 CONFIG_TARGET_IMXRT1050_EVK=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL_SIZE_LIMIT=131072 +CONFIG_SPL_SIZE_LIMIT=0x20000 CONFIG_SPL=y CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk" CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/ls1012aqds_qspi_defconfig b/configs/ls1012aqds_qspi_defconfig index 3c431af81b..1e8e3110f3 100644 --- a/configs/ls1012aqds_qspi_defconfig +++ b/configs/ls1012aqds_qspi_defconfig @@ -72,6 +72,7 @@ CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig index 2e79536e5c..dc405c725a 100644 --- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig +++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig @@ -61,6 +61,7 @@ CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y diff --git a/configs/ls1012aqds_tfa_defconfig b/configs/ls1012aqds_tfa_defconfig index 10d9a67d86..bf03216202 100644 --- a/configs/ls1012aqds_tfa_defconfig +++ b/configs/ls1012aqds_tfa_defconfig @@ -72,6 +72,7 @@ CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y CONFIG_DM_RTC=y +CONFIG_RTC_PCF8563=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y diff --git a/configs/ls2081ardb_defconfig b/configs/ls2081ardb_defconfig index f5cb3bc7da..39e5d7d421 100644 --- a/configs/ls2081ardb_defconfig +++ b/configs/ls2081ardb_defconfig @@ -51,6 +51,7 @@ CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_LAYERSCAPE_RC=y +CONFIG_RTC_PCF8563=y CONFIG_SCSI=y CONFIG_DM_SCSI=y CONFIG_CONS_INDEX=2 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig index 5c3589dc52..22714833cc 100644 --- a/configs/tinker-s-rk3288_defconfig +++ b/configs/tinker-s-rk3288_defconfig @@ -7,7 +7,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_ROCKCHIP_RK3288=y CONFIG_TARGET_TINKER_RK3288=y CONFIG_SPL_STACK_R_ADDR=0x800000 -CONFIG_SPL_SIZE_LIMIT=307200 +CONFIG_SPL_SIZE_LIMIT=0x4B000 CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker-s" diff --git a/doc/README.dfu b/doc/README.dfu index 4b9f883540..be53b5b393 100644 --- a/doc/README.dfu +++ b/doc/README.dfu @@ -121,7 +121,7 @@ Commands: "sf" (serial flash : NOR) cmd: dfu 0 sf <dev> each element in "dfu_alt_info" = - <name> ram <offset> <size> raw access to sf device + <name> raw <offset> <size> raw access to sf device <name> part <dev> <part_id> raw acces to partition <name> partubi <dev> <part_id> raw acces to ubi partition diff --git a/doc/api/index.rst b/doc/api/index.rst index 1c261bcb73..787b6778e5 100644 --- a/doc/api/index.rst +++ b/doc/api/index.rst @@ -12,4 +12,5 @@ U-Boot API documentation pinctrl rng serial + timer unicode diff --git a/doc/api/timer.rst b/doc/api/timer.rst new file mode 100644 index 0000000000..b0695174d7 --- /dev/null +++ b/doc/api/timer.rst @@ -0,0 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2020 Sean Anderson <seanga2@gmail.com> + +Timer Subsystem +=============== + +.. kernel-doc:: include/timer.h + :internal: diff --git a/doc/develop/logging.rst b/doc/develop/logging.rst index 7ce8482ab6..28340a4aac 100644 --- a/doc/develop/logging.rst +++ b/doc/develop/logging.rst @@ -83,11 +83,8 @@ Sometimes it is useful to turn on logging just in one file. You can use this #define LOG_DEBUG to enable building in of all logging statements in a single file. Put it at -the top of the file, before any #includes. - -To actually get U-Boot to output this you need to also set the default logging -level - e.g. set CONFIG_LOG_DEFAULT_LEVEL to 7 (LOGL_DEBUG) or more. Otherwise -debug output is suppressed and will not be generated. +the top of the file, before any #includes. This overrides any log-level setting +in U-Boot, including CONFIG_LOG_DEFAULT_LEVEL, but just for that file. Convenience functions @@ -111,6 +108,12 @@ LOG_CATEGORY, which you can only define once per file, above all #includes, e.g. #define LOG_CATEGORY LOGC_ALLOC +or + +.. code-block:: c + + #define LOG_CATEGORY UCLASS_SPI + Remember that all uclasses IDs are log categories too. diff --git a/doc/device-tree-bindings/spi/spi-qup.txt b/doc/device-tree-bindings/spi/spi-qup.txt new file mode 100644 index 0000000000..3697df2631 --- /dev/null +++ b/doc/device-tree-bindings/spi/spi-qup.txt @@ -0,0 +1,33 @@ +Qualcomm QUP SPI controller Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "qcom,spi-qup-v1.1.1", "qcom,spi-qup-v2.1.1" + or "qcom,spi-qup-v2.2.1" +- reg : Physical base address and size of SPI registers map. +- clock : Clock phandle (see clock bindings for details). +- #address-cells : Number of cells required to define a chip select + address on the SPI bus. Should be set to 1. +- #size-cells : Should be zero. +- pinctrl-names : Must be "default" +- pinctrl-n : At least one pinctrl phandle +- cs-gpios : Should specify GPIOs used for chipselects. + The gpios will be referred to as reg = <index> in the + SPI child nodes. + +Optional properties: +- num-cs : total number of chipselects + +Example: + + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x78b5000 0x600>; + clock = <&gcc 23>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "spi"; + pinctrl-0 = <&blsp_spi0>; + num-cs = <2>; + cs-gpios = <&soc_gpios 54 GPIO_ACTIVE_HIGH>, <&soc_gpios 4 GPIO_ACTIVE_HIGH>; + }; diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c index 7a5ee7a45f..f1becd20d8 100644 --- a/drivers/clk/clk-mux.c +++ b/drivers/clk/clk-mux.c @@ -150,32 +150,8 @@ static int clk_mux_set_parent(struct clk *clk, struct clk *parent) return 0; } -static ulong clk_mux_get_rate(struct clk *clk) -{ - struct clk_mux *mux = to_clk_mux(clk_dev_binded(clk) ? - dev_get_clk_ptr(clk->dev) : clk); - struct udevice *parent; - struct clk *pclk; - int err, index; - - index = clk_mux_get_parent(clk); - if (index >= mux->num_parents) - return -EFAULT; - - err = uclass_get_device_by_name(UCLASS_CLK, mux->parent_names[index], - &parent); - if (err) - return err; - - pclk = dev_get_clk_ptr(parent); - if (!pclk) - return -ENODEV; - - return clk_get_rate(pclk); -} - const struct clk_ops clk_mux_ops = { - .get_rate = clk_mux_get_rate, + .get_rate = clk_generic_get_rate, .set_parent = clk_mux_set_parent, }; diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c index 509b09845a..567d0a4b50 100644 --- a/drivers/core/syscon-uclass.c +++ b/drivers/core/syscon-uclass.c @@ -142,7 +142,7 @@ int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp) ret = uclass_first_device_drvdata(UCLASS_SYSCON, driver_data, devp); if (ret) - return log_msg_ret("find", ret); + return ret; return 0; } diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 84139b85c3..c02badd4a8 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -705,7 +705,7 @@ phys_size_t __fsl_ddr_sdram(fsl_ddr_info_t *pinfo) /* Compute it once normally. */ #ifdef CONFIG_FSL_DDR_INTERACTIVE - if (tstc() && (getc() == 'd')) { /* we got a key press of 'd' */ + if (tstc() && (getchar() == 'd')) { /* we got a key press of 'd' */ total_memory = fsl_ddr_interactive(pinfo, 0); } else if (fsl_ddr_interactive_env_var_exists()) { total_memory = fsl_ddr_interactive(pinfo, 1); diff --git a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h index 5bf3239921..ac9250f74e 100644 --- a/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h +++ b/drivers/ddr/marvell/a38x/ddr_ml_wrapper.h @@ -107,7 +107,7 @@ #define MV_NO_RESOURCE (0x13) /* Resource not available (memory ...) */ #define MV_FULL (0x14) /* Item is full (Queue or table etc...) */ #define MV_EMPTY (0x15) /* Item is empty (Queue or table etc...) */ -#define MV_INIT_ERROR (0x16) /* Error occured while INIT process */ +#define MV_INIT_ERROR (0x16) /* Error occurred while INIT process */ #define MV_HW_ERROR (0x17) /* Hardware error */ #define MV_TX_ERROR (0x18) /* Transmit operation not succeeded */ #define MV_RX_ERROR (0x19) /* Recieve operation not succeeded */ diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index 569a5d39b4..791f32e971 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -807,8 +807,8 @@ int designware_i2c_probe(struct udevice *bus) return -ENXIO; } - log_info("I2C bus %s version %#x\n", bus->name, - readl(&priv->regs->comp_version)); + log_debug("I2C bus %s version %#x\n", bus->name, + readl(&priv->regs->comp_version)); return __dw_i2c_init(priv->regs, 0, 0); } diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c46fa4efc5..a47700e313 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2192,7 +2192,7 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) return 0; error: mmc_set_signal_voltage(mmc, old_voltage); - /* if an error occured, revert to a safer bus mode */ + /* if an error occurred, revert to a safer bus mode */ mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH, EXT_CSD_BUS_WIDTH_1); mmc_select_mode(mmc, MMC_LEGACY); diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index 30fe7a0aa2..4f9fa7d0ec 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -1171,7 +1171,7 @@ skip_fall: internal_delay |= (1 << i); } - dev_err(dev, "Final internal delay: 0x%x\n", internal_delay); + dev_dbg(dev, "Final internal delay: 0x%x\n", internal_delay); internal_delay_phase = get_best_delay(dev, host, internal_delay); clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M, @@ -1179,7 +1179,7 @@ skip_fall: MSDC_PAD_TUNE_CMDRRDLY_S); skip_internal: - dev_err(dev, "Final cmd pad delay: %x\n", final_delay); + dev_dbg(dev, "Final cmd pad delay: %x\n", final_delay); return final_delay == 0xff ? -EIO : 0; } @@ -1265,7 +1265,7 @@ skip_fall: host->hs200_write_int_delay << MSDC_PAD_TUNE_DATWRDLY_S); - dev_err(dev, "Final data pad delay: %x\n", final_delay); + dev_dbg(dev, "Final data pad delay: %x\n", final_delay); return final_delay == 0xff ? -EIO : 0; } diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2beec2da41..3a5e036880 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -732,6 +732,13 @@ config MDIO_MUX_I2CREG an I2C chip. The board it was developed for uses a mux controlled by on-board FPGA which in turn is accessed as a chip over I2C. +config MDIO_IPQ4019 + bool "Qualcomm IPQ4019 MDIO interface support" + depends on DM_MDIO + help + This driver supports the MDIO interface found in Qualcomm + IPQ40xx series Soc-s. + config MVMDIO bool "Marvell MDIO interface support" depends on DM_MDIO diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 9f7a79ecb1..e3bdda359d 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -40,6 +40,7 @@ obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o +obj-$(CONFIG_MDIO_IPQ4019) += mdio-ipq4019.o obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o diff --git a/drivers/net/mdio-ipq4019.c b/drivers/net/mdio-ipq4019.c new file mode 100644 index 0000000000..bc68e1d506 --- /dev/null +++ b/drivers/net/mdio-ipq4019.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Qualcomm IPQ4019 MDIO driver + * + * Copyright (c) 2020 Sartura Ltd. + * + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + * Author: Robert Marko <robert.marko@sartura.hr> + * + * Based on Linux driver + */ + +#include <asm/io.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <linux/bitops.h> +#include <linux/iopoll.h> +#include <miiphy.h> +#include <phy.h> + +#define MDIO_MODE_REG 0x40 +#define MDIO_ADDR_REG 0x44 +#define MDIO_DATA_WRITE_REG 0x48 +#define MDIO_DATA_READ_REG 0x4c +#define MDIO_CMD_REG 0x50 +#define MDIO_CMD_ACCESS_BUSY BIT(16) +#define MDIO_CMD_ACCESS_START BIT(8) +#define MDIO_CMD_ACCESS_CODE_READ 0 +#define MDIO_CMD_ACCESS_CODE_WRITE 1 + +/* 0 = Clause 22, 1 = Clause 45 */ +#define MDIO_MODE_BIT BIT(8) + +#define IPQ4019_MDIO_TIMEOUT 10000 +#define IPQ4019_MDIO_SLEEP 10 + +struct ipq4019_mdio_priv { + phys_addr_t mdio_base; +}; + +static int ipq4019_mdio_wait_busy(struct ipq4019_mdio_priv *priv) +{ + unsigned int busy; + + return readl_poll_sleep_timeout(priv->mdio_base + MDIO_CMD_REG, busy, + (busy & MDIO_CMD_ACCESS_BUSY) == 0, IPQ4019_MDIO_SLEEP, + IPQ4019_MDIO_TIMEOUT); +} + +int ipq4019_mdio_read(struct udevice *dev, int addr, int devad, int reg) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Issue the phy address and reg */ + writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_READ; + + /* Issue read command */ + writel(cmd, priv->mdio_base + MDIO_CMD_REG); + + /* Wait read complete */ + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Read and return data */ + return readl(priv->mdio_base + MDIO_DATA_READ_REG); +} + +int ipq4019_mdio_write(struct udevice *dev, int addr, int devad, + int reg, u16 val) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int cmd; + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + /* Issue the phy addreass and reg */ + writel((addr << 8) | reg, priv->mdio_base + MDIO_ADDR_REG); + + /* Issue write data */ + writel(val, priv->mdio_base + MDIO_DATA_WRITE_REG); + + cmd = MDIO_CMD_ACCESS_START | MDIO_CMD_ACCESS_CODE_WRITE; + + /* Issue write command */ + writel(cmd, priv->mdio_base + MDIO_CMD_REG); + + /* Wait for write complete */ + + if (ipq4019_mdio_wait_busy(priv)) + return -ETIMEDOUT; + + return 0; +} + +static const struct mdio_ops ipq4019_mdio_ops = { + .read = ipq4019_mdio_read, + .write = ipq4019_mdio_write, +}; + +static int ipq4019_mdio_bind(struct udevice *dev) +{ + if (ofnode_valid(dev->node)) + device_set_name(dev, ofnode_get_name(dev->node)); + + return 0; +} + +static int ipq4019_mdio_probe(struct udevice *dev) +{ + struct ipq4019_mdio_priv *priv = dev_get_priv(dev); + unsigned int data; + + priv->mdio_base = dev_read_addr(dev); + if (priv->mdio_base == FDT_ADDR_T_NONE) + return -EINVAL; + + /* Enter Clause 22 mode */ + data = readl(priv->mdio_base + MDIO_MODE_REG); + data &= ~MDIO_MODE_BIT; + writel(data, priv->mdio_base + MDIO_MODE_REG); + + return 0; +} + +static const struct udevice_id ipq4019_mdio_ids[] = { + { .compatible = "qcom,ipq4019-mdio", }, + { } +}; + +U_BOOT_DRIVER(ipq4019_mdio) = { + .name = "ipq4019_mdio", + .id = UCLASS_MDIO, + .of_match = ipq4019_mdio_ids, + .bind = ipq4019_mdio_bind, + .probe = ipq4019_mdio_probe, + .ops = &ipq4019_mdio_ops, + .priv_auto_alloc_size = sizeof(struct ipq4019_mdio_priv), +}; diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index 38390c0d55..5a5d067046 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -394,7 +394,7 @@ bool stm32mp1_ddr_interactive(void *priv, unsigned long start = get_timer(0); while (1) { - if (tstc() && (getc() == 'd')) { + if (tstc() && (getchar() == 'd')) { next_step = STEP_DDR_RESET; break; } diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index b60e11f98b..33c2736554 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -72,15 +72,14 @@ config RESET_UNIPHIER Say Y if you want to control reset signals provided by System Control block, Media I/O block, Peripheral Block. -config AST2500_RESET +config RESET_AST2500 bool "Reset controller driver for AST2500 SoCs" - depends on DM_RESET && WDT_ASPEED + depends on DM_RESET default y if ASPEED_AST2500 help - Support for reset controller on AST2500 SoC. This controller uses - watchdog to reset different peripherals and thus only supports - resets that are supported by watchdog. The main limitation though - is that some reset signals, like I2C or MISC reset multiple devices. + Support for reset controller on AST2500 SoC. + Say Y if you want to control reset signals of different peripherals + through System Control Unit (SCU). config RESET_ROCKCHIP bool "Reset controller driver for Rockchip SoCs" diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 10a7973f82..fa52aa3329 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -14,7 +14,7 @@ obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o -obj-$(CONFIG_AST2500_RESET) += ast2500-reset.o +obj-$(CONFIG_RESET_AST2500) += reset-ast2500.o obj-$(CONFIG_RESET_ROCKCHIP) += reset-rockchip.o obj-$(CONFIG_RESET_MESON) += reset-meson.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git a/drivers/reset/ast2500-reset.c b/drivers/reset/ast2500-reset.c deleted file mode 100644 index beb5cd8fa8..0000000000 --- a/drivers/reset/ast2500-reset.c +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2017 Google, Inc - */ - -#include <common.h> -#include <dm.h> -#include <log.h> -#include <misc.h> -#include <reset.h> -#include <reset-uclass.h> -#include <wdt.h> -#include <asm/io.h> -#include <asm/arch/scu_ast2500.h> -#include <asm/arch/wdt.h> - -struct ast2500_reset_priv { - /* WDT used to perform resets. */ - struct udevice *wdt; - struct ast2500_scu *scu; -}; - -static int ast2500_ofdata_to_platdata(struct udevice *dev) -{ - struct ast2500_reset_priv *priv = dev_get_priv(dev); - int ret; - - ret = uclass_get_device_by_phandle(UCLASS_WDT, dev, "aspeed,wdt", - &priv->wdt); - if (ret) { - debug("%s: can't find WDT for reset controller", __func__); - return ret; - } - - return 0; -} - -static int ast2500_reset_assert(struct reset_ctl *reset_ctl) -{ - struct ast2500_reset_priv *priv = dev_get_priv(reset_ctl->dev); - u32 reset_mode, reset_mask; - bool reset_sdram; - int ret; - - /* - * To reset SDRAM, a specifal flag in SYSRESET register - * needs to be enabled first - */ - reset_mode = ast_reset_mode_from_flags(reset_ctl->id); - reset_mask = ast_reset_mask_from_flags(reset_ctl->id); - reset_sdram = reset_mode == WDT_CTRL_RESET_SOC && - (reset_mask & WDT_RESET_SDRAM); - - if (reset_sdram) { - ast_scu_unlock(priv->scu); - setbits_le32(&priv->scu->sysreset_ctrl1, - SCU_SYSRESET_SDRAM_WDT); - ret = wdt_expire_now(priv->wdt, reset_ctl->id); - clrbits_le32(&priv->scu->sysreset_ctrl1, - SCU_SYSRESET_SDRAM_WDT); - ast_scu_lock(priv->scu); - } else { - ret = wdt_expire_now(priv->wdt, reset_ctl->id); - } - - return ret; -} - -static int ast2500_reset_request(struct reset_ctl *reset_ctl) -{ - debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, - reset_ctl->dev, reset_ctl->id); - - return 0; -} - -static int ast2500_reset_probe(struct udevice *dev) -{ - struct ast2500_reset_priv *priv = dev_get_priv(dev); - - priv->scu = ast_get_scu(); - - return 0; -} - -static const struct udevice_id ast2500_reset_ids[] = { - { .compatible = "aspeed,ast2500-reset" }, - { } -}; - -struct reset_ops ast2500_reset_ops = { - .rst_assert = ast2500_reset_assert, - .request = ast2500_reset_request, -}; - -U_BOOT_DRIVER(ast2500_reset) = { - .name = "ast2500_reset", - .id = UCLASS_RESET, - .of_match = ast2500_reset_ids, - .probe = ast2500_reset_probe, - .ops = &ast2500_reset_ops, - .ofdata_to_platdata = ast2500_ofdata_to_platdata, - .priv_auto_alloc_size = sizeof(struct ast2500_reset_priv), -}; diff --git a/drivers/reset/reset-ast2500.c b/drivers/reset/reset-ast2500.c new file mode 100644 index 0000000000..e7b5c7deca --- /dev/null +++ b/drivers/reset/reset-ast2500.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2017 Google, Inc + * Copyright 2020 ASPEED Technology Inc. + */ + +#include <common.h> +#include <dm.h> +#include <log.h> +#include <misc.h> +#include <reset.h> +#include <reset-uclass.h> +#include <linux/err.h> +#include <asm/io.h> +#include <asm/arch/scu_ast2500.h> + +struct ast2500_reset_priv { + struct ast2500_scu *scu; +}; + +static int ast2500_reset_request(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + return 0; +} + +static int ast2500_reset_free(struct reset_ctl *reset_ctl) +{ + debug("%s(reset_ctl=%p) (dev=%p, id=%lu)\n", __func__, reset_ctl, + reset_ctl->dev, reset_ctl->id); + + return 0; +} + +static int ast2500_reset_assert(struct reset_ctl *reset_ctl) +{ + struct ast2500_reset_priv *priv = dev_get_priv(reset_ctl->dev); + struct ast2500_scu *scu = priv->scu; + + debug("%s: reset_ctl->id: %lu\n", __func__, reset_ctl->id); + + if (reset_ctl->id < 32) + setbits_le32(&scu->sysreset_ctrl1, BIT(reset_ctl->id)); + else + setbits_le32(&scu->sysreset_ctrl2, BIT(reset_ctl->id - 32)); + + return 0; +} + +static int ast2500_reset_deassert(struct reset_ctl *reset_ctl) +{ + struct ast2500_reset_priv *priv = dev_get_priv(reset_ctl->dev); + struct ast2500_scu *scu = priv->scu; + + debug("%s: reset_ctl->id: %lu\n", __func__, reset_ctl->id); + + if (reset_ctl->id < 32) + clrbits_le32(&scu->sysreset_ctrl1, BIT(reset_ctl->id)); + else + clrbits_le32(&scu->sysreset_ctrl2, BIT(reset_ctl->id - 32)); + + return 0; +} + +static int ast2500_reset_probe(struct udevice *dev) +{ + int rc; + struct ast2500_reset_priv *priv = dev_get_priv(dev); + struct udevice *scu_dev; + + /* get SCU base from clock device */ + rc = uclass_get_device_by_driver(UCLASS_CLK, + DM_GET_DRIVER(aspeed_ast2500_scu), &scu_dev); + if (rc) { + debug("%s: clock device not found, rc=%d\n", __func__, rc); + return rc; + } + + priv->scu = devfdt_get_addr_ptr(scu_dev); + if (IS_ERR_OR_NULL(priv->scu)) { + debug("%s: invalid SCU base pointer\n", __func__); + return PTR_ERR(priv->scu); + } + + return 0; +} + +static const struct udevice_id ast2500_reset_ids[] = { + { .compatible = "aspeed,ast2500-reset" }, + { } +}; + +struct reset_ops ast2500_reset_ops = { + .request = ast2500_reset_request, + .rfree = ast2500_reset_free, + .rst_assert = ast2500_reset_assert, + .rst_deassert = ast2500_reset_deassert, +}; + +U_BOOT_DRIVER(ast2500_reset) = { + .name = "ast2500_reset", + .id = UCLASS_RESET, + .of_match = ast2500_reset_ids, + .probe = ast2500_reset_probe, + .ops = &ast2500_reset_ops, + .priv_auto_alloc_size = sizeof(struct ast2500_reset_priv), +}; diff --git a/drivers/rng/Kconfig b/drivers/rng/Kconfig index e4b22d79eb..11001c8ae7 100644 --- a/drivers/rng/Kconfig +++ b/drivers/rng/Kconfig @@ -24,6 +24,13 @@ config RNG_SANDBOX Enable random number generator for sandbox. This is an emulation of a rng device. +config RNG_MSM + bool "Qualcomm SoCs Random Number Generator support" + depends on DM_RNG + help + This driver provides support for the Random Number + Generator hardware found on Qualcomm SoCs. + config RNG_STM32MP1 bool "Enable random number generator for STM32MP1" depends on ARCH_STM32MP diff --git a/drivers/rng/Makefile b/drivers/rng/Makefile index 44a0003917..8953406882 100644 --- a/drivers/rng/Makefile +++ b/drivers/rng/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_DM_RNG) += rng-uclass.o obj-$(CONFIG_RNG_MESON) += meson-rng.o obj-$(CONFIG_RNG_SANDBOX) += sandbox_rng.o +obj-$(CONFIG_RNG_MSM) += msm_rng.o obj-$(CONFIG_RNG_STM32MP1) += stm32mp1_rng.o obj-$(CONFIG_RNG_ROCKCHIP) += rockchip_rng.o diff --git a/drivers/rng/msm_rng.c b/drivers/rng/msm_rng.c new file mode 100644 index 0000000000..d51119303a --- /dev/null +++ b/drivers/rng/msm_rng.c @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * PRNG driver for Qualcomm IPQ40xx + * + * Copyright (c) 2020 Sartura Ltd. + * + * Author: Robert Marko <robert.marko@sartura.hr> + * + * Based on Linux driver + */ + +#include <asm/io.h> +#include <clk.h> +#include <common.h> +#include <dm.h> +#include <linux/bitops.h> +#include <rng.h> + +/* Device specific register offsets */ +#define PRNG_DATA_OUT 0x0000 +#define PRNG_STATUS 0x0004 +#define PRNG_LFSR_CFG 0x0100 +#define PRNG_CONFIG 0x0104 + +/* Device specific register masks and config values */ +#define PRNG_LFSR_CFG_MASK 0x0000ffff +#define PRNG_LFSR_CFG_CLOCKS 0x0000dddd +#define PRNG_CONFIG_HW_ENABLE BIT(1) +#define PRNG_STATUS_DATA_AVAIL BIT(0) + +#define MAX_HW_FIFO_DEPTH 16 +#define MAX_HW_FIFO_SIZE (MAX_HW_FIFO_DEPTH * 4) +#define WORD_SZ 4 + +struct msm_rng_priv { + phys_addr_t base; + struct clk clk; +}; + +static int msm_rng_read(struct udevice *dev, void *data, size_t len) +{ + struct msm_rng_priv *priv = dev_get_priv(dev); + size_t currsize = 0; + u32 *retdata = data; + size_t maxsize; + u32 val; + + /* calculate max size bytes to transfer back to caller */ + maxsize = min_t(size_t, MAX_HW_FIFO_SIZE, len); + + /* read random data from hardware */ + do { + val = readl_relaxed(priv->base + PRNG_STATUS); + if (!(val & PRNG_STATUS_DATA_AVAIL)) + break; + + val = readl_relaxed(priv->base + PRNG_DATA_OUT); + if (!val) + break; + + *retdata++ = val; + currsize += WORD_SZ; + + /* make sure we stay on 32bit boundary */ + if ((maxsize - currsize) < WORD_SZ) + break; + } while (currsize < maxsize); + + return 0; +} + +static int msm_rng_enable(struct msm_rng_priv *priv, int enable) +{ + u32 val; + + if (enable) { + /* Enable PRNG only if it is not already enabled */ + val = readl_relaxed(priv->base + PRNG_CONFIG); + if (val & PRNG_CONFIG_HW_ENABLE) { + val = readl_relaxed(priv->base + PRNG_LFSR_CFG); + val &= ~PRNG_LFSR_CFG_MASK; + val |= PRNG_LFSR_CFG_CLOCKS; + writel(val, priv->base + PRNG_LFSR_CFG); + + val = readl_relaxed(priv->base + PRNG_CONFIG); + val |= PRNG_CONFIG_HW_ENABLE; + writel(val, priv->base + PRNG_CONFIG); + } + } else { + val = readl_relaxed(priv->base + PRNG_CONFIG); + val &= ~PRNG_CONFIG_HW_ENABLE; + writel(val, priv->base + PRNG_CONFIG); + } + + return 0; +} + +static int msm_rng_probe(struct udevice *dev) +{ + struct msm_rng_priv *priv = dev_get_priv(dev); + + int ret; + + priv->base = dev_read_addr(dev); + if (priv->base == FDT_ADDR_T_NONE) + return -EINVAL; + + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) + return ret; + + ret = clk_enable(&priv->clk); + if (ret < 0) + return ret; + + return msm_rng_enable(priv, 1); +} + +static int msm_rng_remove(struct udevice *dev) +{ + struct msm_rng_priv *priv = dev_get_priv(dev); + + return msm_rng_enable(priv, 0); +} + +static const struct dm_rng_ops msm_rng_ops = { + .read = msm_rng_read, +}; + +static const struct udevice_id msm_rng_match[] = { + { .compatible = "qcom,prng", }, + {}, +}; + +U_BOOT_DRIVER(msm_rng) = { + .name = "msm-rng", + .id = UCLASS_RNG, + .of_match = msm_rng_match, + .ops = &msm_rng_ops, + .probe = msm_rng_probe, + .remove = msm_rng_remove, + .priv_auto_alloc_size = sizeof(struct msm_rng_priv), +}; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 59e2fc44ba..63662001c2 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -75,6 +75,12 @@ config RTC_ISL1208 This driver supports reading and writing the RTC/calendar and detects total power failures. +config RTC_PCF8563 + tristate "Philips PCF8563" + help + If you say yes here you get support for the Philips PCF8563 RTC + and compatible chips. + config RTC_RV3029 bool "Enable RV3029 driver" depends on DM_RTC diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b4805a2e4e..b6ba702bd3 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -401,11 +401,19 @@ config DEBUG_UART_MTK driver will be available until the real driver model serial is running. +config DEBUG_UART_XEN + bool "XEN Hypervisor Console" + depends on XEN_SERIAL + help + Select this to enable a debug UART using the serial_xen driver. You + will not have to provide any parameters to make this work. The driver + will be available until the real driver-model serial is running. + endchoice config DEBUG_UART_BASE hex "Base address of UART" - depends on DEBUG_UART + depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART_SANDBOX help This is the base address of your UART for memory-mapped UARTs. @@ -415,7 +423,7 @@ config DEBUG_UART_BASE config DEBUG_UART_CLOCK int "UART input clock" - depends on DEBUG_UART + depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART_SANDBOX help The UART input clock determines the speed of the internal UART @@ -427,7 +435,7 @@ config DEBUG_UART_CLOCK config DEBUG_UART_SHIFT int "UART register shift" - depends on DEBUG_UART + depends on DEBUG_UART && !DEBUG_UART_XEN default 0 if DEBUG_UART help Some UARTs (notably ns16550) support different register layouts diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 0027625ebf..f3c25d4216 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -413,7 +413,7 @@ static int on_baudrate(const char *name, const char *value, enum env_op op, if ((flags & H_INTERACTIVE) != 0) while (1) { - if (getc() == '\r') + if (getchar() == '\r') break; } diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 53358acb81..355659ba05 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -90,7 +90,7 @@ static int on_baudrate(const char *name, const char *value, enum env_op op, if ((flags & H_INTERACTIVE) != 0) while (1) { - if (getc() == '\r') + if (getchar() == '\r') break; } diff --git a/drivers/serial/serial_xen.c b/drivers/serial/serial_xen.c index ba6504b947..34c90ece40 100644 --- a/drivers/serial/serial_xen.c +++ b/drivers/serial/serial_xen.c @@ -5,6 +5,7 @@ */ #include <common.h> #include <cpu_func.h> +#include <debug_uart.h> #include <dm.h> #include <serial.h> #include <watchdog.h> @@ -15,11 +16,14 @@ #include <xen/events.h> #include <xen/interface/sched.h> +#include <xen/interface/xen.h> #include <xen/interface/hvm/hvm_op.h> #include <xen/interface/hvm/params.h> #include <xen/interface/io/console.h> #include <xen/interface/io/ring.h> +#include <asm/xen/hypercall.h> + DECLARE_GLOBAL_DATA_PTR; u32 console_evtchn; @@ -175,8 +179,22 @@ U_BOOT_DRIVER(serial_xen) = { .priv_auto_alloc_size = sizeof(struct xen_uart_priv), .probe = xen_serial_probe, .ops = &xen_serial_ops, -#if !CONFIG_IS_ENABLED(OF_CONTROL) .flags = DM_FLAG_PRE_RELOC, -#endif }; +#if defined(CONFIG_DEBUG_UART_XEN) +static inline void _debug_uart_init(void) {} + +static inline void _debug_uart_putc(int c) +{ +#if CONFIG_IS_ENABLED(ARM) + xen_debug_putc(c); +#else + /* the type cast should work on LE only */ + HYPERVISOR_console_io(CONSOLEIO_write, 1, (char *)&ch); +#endif +} + +DEBUG_UART_FUNCS + +#endif diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5df97c80fa..f7a9852565 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -271,6 +271,16 @@ config PL022_SPI controller. If you have an embedded system with an AMBA(R) bus and a PL022 controller, say Y or M here. +config SPI_QUP + bool "Qualcomm SPI controller with QUP interface" + depends on ARCH_IPQ40XX + help + Qualcomm Universal Peripheral (QUP) core is an AHB slave that + provides a common data path (an output FIFO and an input FIFO) + for serial peripheral interface (SPI) mini-core. SPI in master + mode supports up to 50MHz, up to four chip selects, programmable + data path from 4 bits to 32 bits and numerous protocol variants. + config RENESAS_RPC_SPI bool "Renesas RPC SPI driver" depends on RCAR_GEN3 || RZA1 diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index b5c9ff1af8..d9b5bd9b79 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_OCTEON_SPI) += octeon_spi.o obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o obj-$(CONFIG_PIC32_SPI) += pic32_spi.o obj-$(CONFIG_PL022_SPI) += pl022_spi.o +obj-$(CONFIG_SPI_QUP) += spi-qup.o obj-$(CONFIG_RENESAS_RPC_SPI) += renesas_rpc_spi.o obj-$(CONFIG_ROCKCHIP_SPI) += rk_spi.o obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c new file mode 100644 index 0000000000..6f8df55fa5 --- /dev/null +++ b/drivers/spi/spi-qup.c @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Qualcomm QUP SPI controller + * FIFO and Block modes supported, no DMA + * mode support + * + * Copyright (c) 2020 Sartura Ltd. + * + * Author: Robert Marko <robert.marko@sartura.hr> + * Author: Luka Kovacic <luka.kovacic@sartura.hr> + * + * Based on stock U-boot and Linux drivers + */ + +#include <asm/gpio.h> +#include <asm/io.h> +#include <clk.h> +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <linux/delay.h> +#include <spi.h> + +#define QUP_CONFIG 0x0000 +#define QUP_STATE 0x0004 +#define QUP_IO_M_MODES 0x0008 +#define QUP_SW_RESET 0x000c +#define QUP_OPERATIONAL 0x0018 +#define QUP_ERROR_FLAGS 0x001c +#define QUP_ERROR_FLAGS_EN 0x0020 +#define QUP_OPERATIONAL_MASK 0x0028 +#define QUP_HW_VERSION 0x0030 +#define QUP_MX_OUTPUT_CNT 0x0100 +#define QUP_OUTPUT_FIFO 0x0110 +#define QUP_MX_WRITE_CNT 0x0150 +#define QUP_MX_INPUT_CNT 0x0200 +#define QUP_MX_READ_CNT 0x0208 +#define QUP_INPUT_FIFO 0x0218 + +#define SPI_CONFIG 0x0300 +#define SPI_IO_CONTROL 0x0304 +#define SPI_ERROR_FLAGS 0x0308 +#define SPI_ERROR_FLAGS_EN 0x030c + +/* QUP_CONFIG fields */ +#define QUP_CONFIG_SPI_MODE BIT(8) +#define QUP_CONFIG_CLOCK_AUTO_GATE BIT(13) +#define QUP_CONFIG_NO_INPUT BIT(7) +#define QUP_CONFIG_NO_OUTPUT BIT(6) +#define QUP_CONFIG_N 0x001f + +/* QUP_STATE fields */ +#define QUP_STATE_VALID BIT(2) +#define QUP_STATE_RESET 0 +#define QUP_STATE_RUN 1 +#define QUP_STATE_PAUSE 3 +#define QUP_STATE_MASK 3 +#define QUP_STATE_CLEAR 2 + +/* QUP_IO_M_MODES fields */ +#define QUP_IO_M_PACK_EN BIT(15) +#define QUP_IO_M_UNPACK_EN BIT(14) +#define QUP_IO_M_INPUT_MODE_MASK_SHIFT 12 +#define QUP_IO_M_OUTPUT_MODE_MASK_SHIFT 10 +#define QUP_IO_M_INPUT_MODE_MASK (3 << QUP_IO_M_INPUT_MODE_MASK_SHIFT) +#define QUP_IO_M_OUTPUT_MODE_MASK (3 << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT) + +#define QUP_IO_M_OUTPUT_BLOCK_SIZE(x) (((x) & (0x03 << 0)) >> 0) +#define QUP_IO_M_OUTPUT_FIFO_SIZE(x) (((x) & (0x07 << 2)) >> 2) +#define QUP_IO_M_INPUT_BLOCK_SIZE(x) (((x) & (0x03 << 5)) >> 5) +#define QUP_IO_M_INPUT_FIFO_SIZE(x) (((x) & (0x07 << 7)) >> 7) + +#define QUP_IO_M_MODE_FIFO 0 +#define QUP_IO_M_MODE_BLOCK 1 +#define QUP_IO_M_MODE_DMOV 2 +#define QUP_IO_M_MODE_BAM 3 + +/* QUP_OPERATIONAL fields */ +#define QUP_OP_IN_BLOCK_READ_REQ BIT(13) +#define QUP_OP_OUT_BLOCK_WRITE_REQ BIT(12) +#define QUP_OP_MAX_INPUT_DONE_FLAG BIT(11) +#define QUP_OP_MAX_OUTPUT_DONE_FLAG BIT(10) +#define QUP_OP_IN_SERVICE_FLAG BIT(9) +#define QUP_OP_OUT_SERVICE_FLAG BIT(8) +#define QUP_OP_IN_FIFO_FULL BIT(7) +#define QUP_OP_OUT_FIFO_FULL BIT(6) +#define QUP_OP_IN_FIFO_NOT_EMPTY BIT(5) +#define QUP_OP_OUT_FIFO_NOT_EMPTY BIT(4) + +/* QUP_ERROR_FLAGS and QUP_ERROR_FLAGS_EN fields */ +#define QUP_ERROR_OUTPUT_OVER_RUN BIT(5) +#define QUP_ERROR_INPUT_UNDER_RUN BIT(4) +#define QUP_ERROR_OUTPUT_UNDER_RUN BIT(3) +#define QUP_ERROR_INPUT_OVER_RUN BIT(2) + +/* SPI_CONFIG fields */ +#define SPI_CONFIG_HS_MODE BIT(10) +#define SPI_CONFIG_INPUT_FIRST BIT(9) +#define SPI_CONFIG_LOOPBACK BIT(8) + +/* SPI_IO_CONTROL fields */ +#define SPI_IO_C_FORCE_CS BIT(11) +#define SPI_IO_C_CLK_IDLE_HIGH BIT(10) +#define SPI_IO_C_MX_CS_MODE BIT(8) +#define SPI_IO_C_CS_N_POLARITY_0 BIT(4) +#define SPI_IO_C_CS_SELECT(x) (((x) & 3) << 2) +#define SPI_IO_C_CS_SELECT_MASK 0x000c +#define SPI_IO_C_TRISTATE_CS BIT(1) +#define SPI_IO_C_NO_TRI_STATE BIT(0) + +/* SPI_ERROR_FLAGS and SPI_ERROR_FLAGS_EN fields */ +#define SPI_ERROR_CLK_OVER_RUN BIT(1) +#define SPI_ERROR_CLK_UNDER_RUN BIT(0) + +#define SPI_NUM_CHIPSELECTS 4 + +#define SPI_DELAY_THRESHOLD 1 +#define SPI_DELAY_RETRY 10 + +#define SPI_RESET_STATE 0 +#define SPI_RUN_STATE 1 +#define SPI_CORE_RESET 0 +#define SPI_CORE_RUNNING 1 + +#define DUMMY_DATA_VAL 0 +#define TIMEOUT_CNT 100 + +#define QUP_STATE_VALID_BIT 2 +#define QUP_CONFIG_MINI_CORE_MSK (0x0F << 8) +#define QUP_CONFIG_MINI_CORE_SPI BIT(8) +#define QUP_CONF_INPUT_MSK BIT(7) +#define QUP_CONF_INPUT_ENA (0 << 7) +#define QUP_CONF_NO_INPUT BIT(7) +#define QUP_CONF_OUTPUT_MSK BIT(6) +#define QUP_CONF_OUTPUT_ENA (0 << 6) +#define QUP_CONF_NO_OUTPUT BIT(6) +#define QUP_STATE_RUN_STATE 0x1 +#define QUP_STATE_RESET_STATE 0x0 +#define QUP_STATE_PAUSE_STATE 0x3 +#define SPI_BIT_WORD_MSK 0x1F +#define SPI_8_BIT_WORD 0x07 +#define LOOP_BACK_MSK BIT(8) +#define NO_LOOP_BACK (0 << 8) +#define SLAVE_OPERATION_MSK BIT(5) +#define SLAVE_OPERATION (0 << 5) +#define CLK_ALWAYS_ON (0 << 9) +#define MX_CS_MODE BIT(8) +#define CS_POLARITY_MASK BIT(4) +#define NO_TRI_STATE BIT(0) +#define FORCE_CS_MSK BIT(11) +#define FORCE_CS_EN BIT(11) +#define FORCE_CS_DIS (0 << 11) +#define OUTPUT_BIT_SHIFT_MSK BIT(16) +#define OUTPUT_BIT_SHIFT_EN BIT(16) +#define INPUT_BLOCK_MODE_MSK (0x03 << 12) +#define INPUT_BLOCK_MODE (0x01 << 12) +#define OUTPUT_BLOCK_MODE_MSK (0x03 << 10) +#define OUTPUT_BLOCK_MODE (0x01 << 10) +#define INPUT_BAM_MODE (0x3 << 12) +#define OUTPUT_BAM_MODE (0x3 << 10) +#define PACK_EN (0x1 << 15) +#define UNPACK_EN (0x1 << 14) +#define PACK_EN_MSK (0x1 << 15) +#define UNPACK_EN_MSK (0x1 << 14) +#define OUTPUT_SERVICE_MSK (0x1 << 8) +#define INPUT_SERVICE_MSK (0x1 << 9) +#define OUTPUT_SERVICE_DIS (0x1 << 8) +#define INPUT_SERVICE_DIS (0x1 << 9) +#define BLSP0_SPI_DEASSERT_WAIT_REG 0x0310 +#define QUP_DATA_AVAILABLE_FOR_READ BIT(5) +#define SPI_INPUT_BLOCK_SIZE 4 +#define SPI_OUTPUT_BLOCK_SIZE 4 +#define SPI_BITLEN_MSK 0x07 +#define MAX_COUNT_SIZE 0xffff + +struct qup_spi_priv { + phys_addr_t base; + struct clk clk; + u32 num_cs; + struct gpio_desc cs_gpios[SPI_NUM_CHIPSELECTS]; + bool cs_high; + u32 core_state; +}; + +static int qup_spi_set_cs(struct udevice *dev, unsigned int cs, bool enable) +{ + struct qup_spi_priv *priv = dev_get_priv(dev); + + debug("%s: cs=%d enable=%d\n", __func__, cs, enable); + + if (cs >= SPI_NUM_CHIPSELECTS) + return -ENODEV; + + if (!dm_gpio_is_valid(&priv->cs_gpios[cs])) + return -EINVAL; + + if (priv->cs_high) + enable = !enable; + + return dm_gpio_set_value(&priv->cs_gpios[cs], enable ? 1 : 0); +} + +/* + * Function to write data to OUTPUT FIFO + */ +static void qup_spi_write_byte(struct udevice *dev, unsigned char data) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + /* Wait for space in the FIFO */ + while ((readl(priv->base + QUP_OPERATIONAL) & QUP_OP_OUT_FIFO_FULL)) + udelay(1); + + /* Write the byte of data */ + writel(data, priv->base + QUP_OUTPUT_FIFO); +} + +/* + * Function to read data from Input FIFO + */ +static unsigned char qup_spi_read_byte(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + /* Wait for Data in FIFO */ + while (!(readl(priv->base + QUP_OPERATIONAL) & QUP_DATA_AVAILABLE_FOR_READ)) { + printf("Stuck at FIFO data wait\n"); + udelay(1); + } + + /* Read a byte of data */ + return readl(priv->base + QUP_INPUT_FIFO) & 0xff; +} + +/* + * Function to check wheather Input or Output FIFO + * has data to be serviced + */ +static int qup_spi_check_fifo_status(struct udevice *dev, u32 reg_addr) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + unsigned int count = TIMEOUT_CNT; + unsigned int status_flag; + unsigned int val; + + do { + val = readl(priv->base + reg_addr); + count--; + if (count == 0) + return -ETIMEDOUT; + + status_flag = ((val & QUP_OP_OUT_SERVICE_FLAG) | (val & QUP_OP_IN_SERVICE_FLAG)); + } while (!status_flag); + + return 0; +} + +/* + * Function to configure Input and Output enable/disable + */ +static void qup_spi_enable_io_config(struct udevice *dev, u32 write_cnt, u32 read_cnt) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + + if (write_cnt) { + clrsetbits_le32(priv->base + QUP_CONFIG, + QUP_CONF_OUTPUT_MSK, QUP_CONF_OUTPUT_ENA); + } else { + clrsetbits_le32(priv->base + QUP_CONFIG, + QUP_CONF_OUTPUT_MSK, QUP_CONF_NO_OUTPUT); + } + + if (read_cnt) { + clrsetbits_le32(priv->base + QUP_CONFIG, + QUP_CONF_INPUT_MSK, QUP_CONF_INPUT_ENA); + } else { + clrsetbits_le32(priv->base + QUP_CONFIG, + QUP_CONF_INPUT_MSK, QUP_CONF_NO_INPUT); + } +} + +static int check_bit_state(struct udevice *dev, u32 reg_addr, int bit_num, int val, + int us_delay) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + unsigned int count = TIMEOUT_CNT; + unsigned int bit_val = ((readl(priv->base + reg_addr) >> bit_num) & 0x01); + + while (bit_val != val) { + count--; + if (count == 0) + return -ETIMEDOUT; + udelay(us_delay); + bit_val = ((readl(priv->base + reg_addr) >> bit_num) & 0x01); + } + + return 0; +} + +/* + * Check whether QUPn State is valid + */ +static int check_qup_state_valid(struct udevice *dev) +{ + return check_bit_state(dev, QUP_STATE, QUP_STATE_VALID, 1, 1); +} + +/* + * Configure QUPn Core state + */ +static int qup_spi_config_spi_state(struct udevice *dev, unsigned int state) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + u32 val; + int ret; + + ret = check_qup_state_valid(dev); + if (ret != 0) + return ret; + + switch (state) { + case SPI_RUN_STATE: + /* Set the state to RUN */ + val = ((readl(priv->base + QUP_STATE) & ~QUP_STATE_MASK) + | QUP_STATE_RUN); + writel(val, priv->base + QUP_STATE); + ret = check_qup_state_valid(dev); + if (ret != 0) + return ret; + priv->core_state = SPI_CORE_RUNNING; + break; + case SPI_RESET_STATE: + /* Set the state to RESET */ + val = ((readl(priv->base + QUP_STATE) & ~QUP_STATE_MASK) + | QUP_STATE_RESET); + writel(val, priv->base + QUP_STATE); + ret = check_qup_state_valid(dev); + if (ret != 0) + return ret; + priv->core_state = SPI_CORE_RESET; + break; + default: + printf("Unsupported QUP SPI state: %d\n", state); + ret = -EINVAL; + break; + } + return ret; +} + +/* + * Function to read bytes number of data from the Input FIFO + */ +static int __qup_spi_blsp_spi_read(struct udevice *dev, u8 *data_buffer, unsigned int bytes) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + u32 val; + unsigned int i; + unsigned int read_bytes = bytes; + unsigned int fifo_count; + int ret = 0; + int state_config; + + /* Configure no of bytes to read */ + state_config = qup_spi_config_spi_state(dev, SPI_RESET_STATE); + if (state_config) + return state_config; + + /* Configure input and output enable */ + qup_spi_enable_io_config(dev, 0, read_bytes); + + writel(bytes, priv->base + QUP_MX_INPUT_CNT); + + state_config = qup_spi_config_spi_state(dev, SPI_RUN_STATE); + if (state_config) + return state_config; + + while (read_bytes) { + ret = qup_spi_check_fifo_status(dev, QUP_OPERATIONAL); + if (ret != 0) + goto out; + + val = readl(priv->base + QUP_OPERATIONAL); + if (val & QUP_OP_IN_SERVICE_FLAG) { + /* + * acknowledge to hw that software will + * read input data + */ + val &= QUP_OP_IN_SERVICE_FLAG; + writel(val, priv->base + QUP_OPERATIONAL); + + fifo_count = ((read_bytes > SPI_INPUT_BLOCK_SIZE) ? + SPI_INPUT_BLOCK_SIZE : read_bytes); + + for (i = 0; i < fifo_count; i++) { + *data_buffer = qup_spi_read_byte(dev); + data_buffer++; + read_bytes--; + } + } + } + +out: + /* + * Put the SPI Core back in the Reset State + * to end the transfer + */ + (void)qup_spi_config_spi_state(dev, SPI_RESET_STATE); + + return ret; +} + +static int qup_spi_blsp_spi_read(struct udevice *dev, u8 *data_buffer, unsigned int bytes) +{ + int length, ret; + + while (bytes) { + length = (bytes < MAX_COUNT_SIZE) ? bytes : MAX_COUNT_SIZE; + + ret = __qup_spi_blsp_spi_read(dev, data_buffer, length); + if (ret != 0) + return ret; + + data_buffer += length; + bytes -= length; + } + + return 0; +} + +/* + * Function to write data to the Output FIFO + */ +static int __qup_blsp_spi_write(struct udevice *dev, const u8 *cmd_buffer, unsigned int bytes) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + u32 val; + unsigned int i; + unsigned int write_len = bytes; + unsigned int read_len = bytes; + unsigned int fifo_count; + int ret = 0; + int state_config; + + state_config = qup_spi_config_spi_state(dev, SPI_RESET_STATE); + if (state_config) + return state_config; + + writel(bytes, priv->base + QUP_MX_OUTPUT_CNT); + writel(bytes, priv->base + QUP_MX_INPUT_CNT); + state_config = qup_spi_config_spi_state(dev, SPI_RUN_STATE); + if (state_config) + return state_config; + + /* Configure input and output enable */ + qup_spi_enable_io_config(dev, write_len, read_len); + + /* + * read_len considered to ensure that we read the dummy data for the + * write we performed. This is needed to ensure with WR-RD transaction + * to get the actual data on the subsequent read cycle that happens + */ + while (write_len || read_len) { + ret = qup_spi_check_fifo_status(dev, QUP_OPERATIONAL); + if (ret != 0) + goto out; + + val = readl(priv->base + QUP_OPERATIONAL); + if (val & QUP_OP_OUT_SERVICE_FLAG) { + /* + * acknowledge to hw that software will write + * expected output data + */ + val &= QUP_OP_OUT_SERVICE_FLAG; + writel(val, priv->base + QUP_OPERATIONAL); + + if (write_len > SPI_OUTPUT_BLOCK_SIZE) + fifo_count = SPI_OUTPUT_BLOCK_SIZE; + else + fifo_count = write_len; + + for (i = 0; i < fifo_count; i++) { + /* Write actual data to output FIFO */ + qup_spi_write_byte(dev, *cmd_buffer); + cmd_buffer++; + write_len--; + } + } + if (val & QUP_OP_IN_SERVICE_FLAG) { + /* + * acknowledge to hw that software + * will read input data + */ + val &= QUP_OP_IN_SERVICE_FLAG; + writel(val, priv->base + QUP_OPERATIONAL); + + if (read_len > SPI_INPUT_BLOCK_SIZE) + fifo_count = SPI_INPUT_BLOCK_SIZE; + else + fifo_count = read_len; + + for (i = 0; i < fifo_count; i++) { + /* Read dummy data for the data written */ + (void)qup_spi_read_byte(dev); + + /* Decrement the write count after reading the + * dummy data from the device. This is to make + * sure we read dummy data before we write the + * data to fifo + */ + read_len--; + } + } + } +out: + /* + * Put the SPI Core back in the Reset State + * to end the transfer + */ + (void)qup_spi_config_spi_state(dev, SPI_RESET_STATE); + + return ret; +} + +static int qup_spi_blsp_spi_write(struct udevice *dev, const u8 *cmd_buffer, unsigned int bytes) +{ + int length, ret; + + while (bytes) { + length = (bytes < MAX_COUNT_SIZE) ? bytes : MAX_COUNT_SIZE; + + ret = __qup_blsp_spi_write(dev, cmd_buffer, length); + if (ret != 0) + return ret; + + cmd_buffer += length; + bytes -= length; + } + + return 0; +} + +static int qup_spi_set_speed(struct udevice *dev, uint speed) +{ + return 0; +} + +static int qup_spi_set_mode(struct udevice *dev, uint mode) +{ + struct qup_spi_priv *priv = dev_get_priv(dev); + unsigned int clk_idle_state; + unsigned int input_first_mode; + u32 val; + + switch (mode) { + case SPI_MODE_0: + clk_idle_state = 0; + input_first_mode = SPI_CONFIG_INPUT_FIRST; + break; + case SPI_MODE_1: + clk_idle_state = 0; + input_first_mode = 0; + break; + case SPI_MODE_2: + clk_idle_state = 1; + input_first_mode = SPI_CONFIG_INPUT_FIRST; + break; + case SPI_MODE_3: + clk_idle_state = 1; + input_first_mode = 0; + break; + default: + printf("Unsupported spi mode: %d\n", mode); + return -EINVAL; + } + + if (mode & SPI_CS_HIGH) + priv->cs_high = true; + else + priv->cs_high = false; + + val = readl(priv->base + SPI_CONFIG); + val |= input_first_mode; + writel(val, priv->base + SPI_CONFIG); + + val = readl(priv->base + SPI_IO_CONTROL); + if (clk_idle_state) + val |= SPI_IO_C_CLK_IDLE_HIGH; + else + val &= ~SPI_IO_C_CLK_IDLE_HIGH; + + writel(val, priv->base + SPI_IO_CONTROL); + + return 0; +} + +static void qup_spi_reset(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + + /* Driver may not be probed yet */ + if (!priv) + return; + + writel(0x1, priv->base + QUP_SW_RESET); + udelay(5); +} + +static int qup_spi_hw_init(struct udevice *dev) +{ + struct udevice *bus = dev_get_parent(dev); + struct qup_spi_priv *priv = dev_get_priv(bus); + int ret; + + /* QUPn module configuration */ + qup_spi_reset(dev); + + /* Set the QUPn state */ + ret = qup_spi_config_spi_state(dev, SPI_RESET_STATE); + if (ret) + return ret; + + /* + * Configure Mini core to SPI core with Input Output enabled, + * SPI master, N = 8 bits + */ + clrsetbits_le32(priv->base + QUP_CONFIG, (QUP_CONFIG_MINI_CORE_MSK | + QUP_CONF_INPUT_MSK | + QUP_CONF_OUTPUT_MSK | + SPI_BIT_WORD_MSK), + (QUP_CONFIG_MINI_CORE_SPI | + QUP_CONF_INPUT_ENA | + QUP_CONF_OUTPUT_ENA | + SPI_8_BIT_WORD)); + + /* + * Configure Input first SPI protocol, + * SPI master mode and no loopback + */ + clrsetbits_le32(priv->base + SPI_CONFIG, (LOOP_BACK_MSK | + SLAVE_OPERATION_MSK), + (NO_LOOP_BACK | + SLAVE_OPERATION)); + + /* + * Configure SPI IO Control Register + * CLK_ALWAYS_ON = 0 + * MX_CS_MODE = 0 + * NO_TRI_STATE = 1 + */ + writel((CLK_ALWAYS_ON | NO_TRI_STATE), priv->base + SPI_IO_CONTROL); + + /* + * Configure SPI IO Modes. + * OUTPUT_BIT_SHIFT_EN = 1 + * INPUT_MODE = Block Mode + * OUTPUT MODE = Block Mode + */ + + clrsetbits_le32(priv->base + QUP_IO_M_MODES, (OUTPUT_BIT_SHIFT_MSK | + INPUT_BLOCK_MODE_MSK | + OUTPUT_BLOCK_MODE_MSK), + (OUTPUT_BIT_SHIFT_EN | + INPUT_BLOCK_MODE | + OUTPUT_BLOCK_MODE)); + + /* Disable Error mask */ + writel(0, priv->base + SPI_ERROR_FLAGS_EN); + writel(0, priv->base + QUP_ERROR_FLAGS_EN); + writel(0, priv->base + BLSP0_SPI_DEASSERT_WAIT_REG); + + return ret; +} + +static int qup_spi_claim_bus(struct udevice *dev) +{ + int ret; + + ret = qup_spi_hw_init(dev); + if (ret) + return -EIO; + + return 0; +} + +static int qup_spi_release_bus(struct udevice *dev) +{ + /* Reset the SPI hardware */ + qup_spi_reset(dev); + + return 0; +} + +static int qup_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + struct udevice *bus = dev_get_parent(dev); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); + unsigned int len; + const u8 *txp = dout; + u8 *rxp = din; + int ret = 0; + + if (bitlen & SPI_BITLEN_MSK) { + printf("Invalid bit length\n"); + return -EINVAL; + } + + len = bitlen >> 3; + + if (flags & SPI_XFER_BEGIN) { + ret = qup_spi_hw_init(dev); + if (ret != 0) + return ret; + + ret = qup_spi_set_cs(bus, slave_plat->cs, false); + if (ret != 0) + return ret; + } + + if (dout != NULL) { + ret = qup_spi_blsp_spi_write(dev, txp, len); + if (ret != 0) + return ret; + } + + if (din != NULL) { + ret = qup_spi_blsp_spi_read(dev, rxp, len); + if (ret != 0) + return ret; + } + + if (flags & SPI_XFER_END) { + ret = qup_spi_set_cs(bus, slave_plat->cs, true); + if (ret != 0) + return ret; + } + + return ret; +} + +static int qup_spi_probe(struct udevice *dev) +{ + struct qup_spi_priv *priv = dev_get_priv(dev); + int ret; + + priv->base = dev_read_addr(dev); + if (priv->base == FDT_ADDR_T_NONE) + return -EINVAL; + + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) + return ret; + + ret = clk_enable(&priv->clk); + if (ret < 0) + return ret; + + priv->num_cs = dev_read_u32_default(dev, "num-cs", 1); + + ret = gpio_request_list_by_name(dev, "cs-gpios", priv->cs_gpios, + priv->num_cs, GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE); + if (ret < 0) { + printf("Can't get %s cs gpios: %d\n", dev->name, ret); + return -EINVAL; + } + + return 0; +} + +static const struct dm_spi_ops qup_spi_ops = { + .claim_bus = qup_spi_claim_bus, + .release_bus = qup_spi_release_bus, + .xfer = qup_spi_xfer, + .set_speed = qup_spi_set_speed, + .set_mode = qup_spi_set_mode, + /* + * cs_info is not needed, since we require all chip selects to be + * in the device tree explicitly + */ +}; + +static const struct udevice_id qup_spi_ids[] = { + { .compatible = "qcom,spi-qup-v1.1.1", }, + { .compatible = "qcom,spi-qup-v2.1.1", }, + { .compatible = "qcom,spi-qup-v2.2.1", }, + { } +}; + +U_BOOT_DRIVER(spi_qup) = { + .name = "spi_qup", + .id = UCLASS_SPI, + .of_match = qup_spi_ids, + .ops = &qup_spi_ops, + .priv_auto_alloc_size = sizeof(struct qup_spi_priv), + .probe = qup_spi_probe, +}; diff --git a/drivers/timer/ag101p_timer.c b/drivers/timer/ag101p_timer.c index c011906b93..23ad5b2b67 100644 --- a/drivers/timer/ag101p_timer.c +++ b/drivers/timer/ag101p_timer.c @@ -62,14 +62,13 @@ struct atftmr_timer_platdata { struct atftmr_timer_regs *regs; }; -static int atftmr_timer_get_count(struct udevice *dev, u64 *count) +static u64 atftmr_timer_get_count(struct udevice *dev) { struct atftmr_timer_platdata *plat = dev->platdata; struct atftmr_timer_regs *const regs = plat->regs; u32 val; val = readl(®s->t3_counter); - *count = timer_conv_64(val); - return 0; + return timer_conv_64(val); } static int atftmr_timer_probe(struct udevice *dev) diff --git a/drivers/timer/altera_timer.c b/drivers/timer/altera_timer.c index 6cb2923e0b..ccc164ee17 100644 --- a/drivers/timer/altera_timer.c +++ b/drivers/timer/altera_timer.c @@ -32,7 +32,7 @@ struct altera_timer_platdata { struct altera_timer_regs *regs; }; -static int altera_timer_get_count(struct udevice *dev, u64 *count) +static u64 altera_timer_get_count(struct udevice *dev) { struct altera_timer_platdata *plat = dev->platdata; struct altera_timer_regs *const regs = plat->regs; @@ -44,9 +44,7 @@ static int altera_timer_get_count(struct udevice *dev, u64 *count) /* Read timer value */ val = readl(®s->snapl) & 0xffff; val |= (readl(®s->snaph) & 0xffff) << 16; - *count = timer_conv_64(~val); - - return 0; + return timer_conv_64(~val); } static int altera_timer_probe(struct udevice *dev) diff --git a/drivers/timer/arc_timer.c b/drivers/timer/arc_timer.c index 8c574ec5af..2dea9f40cb 100644 --- a/drivers/timer/arc_timer.c +++ b/drivers/timer/arc_timer.c @@ -26,7 +26,7 @@ struct arc_timer_priv { uint timer_id; }; -static int arc_timer_get_count(struct udevice *dev, u64 *count) +static u64 arc_timer_get_count(struct udevice *dev) { u32 val = 0; struct arc_timer_priv *priv = dev_get_priv(dev); @@ -39,9 +39,7 @@ static int arc_timer_get_count(struct udevice *dev, u64 *count) val = read_aux_reg(ARC_AUX_TIMER1_CNT); break; } - *count = timer_conv_64(val); - - return 0; + return timer_conv_64(val); } static int arc_timer_probe(struct udevice *dev) diff --git a/drivers/timer/ast_timer.c b/drivers/timer/ast_timer.c index e313249740..35369a4087 100644 --- a/drivers/timer/ast_timer.c +++ b/drivers/timer/ast_timer.c @@ -51,13 +51,11 @@ static int ast_timer_probe(struct udevice *dev) return 0; } -static int ast_timer_get_count(struct udevice *dev, u64 *count) +static u64 ast_timer_get_count(struct udevice *dev) { struct ast_timer_priv *priv = dev_get_priv(dev); - *count = AST_TMC_RELOAD_VAL - readl(&priv->tmc->status); - - return 0; + return AST_TMC_RELOAD_VAL - readl(&priv->tmc->status); } static int ast_timer_ofdata_to_platdata(struct udevice *dev) diff --git a/drivers/timer/atcpit100_timer.c b/drivers/timer/atcpit100_timer.c index 5d4ae68509..fcb8a45358 100644 --- a/drivers/timer/atcpit100_timer.c +++ b/drivers/timer/atcpit100_timer.c @@ -68,13 +68,12 @@ struct atcpit_timer_platdata { u32 *regs; }; -static int atcpit_timer_get_count(struct udevice *dev, u64 *count) +static u64 atcpit_timer_get_count(struct udevice *dev) { struct atcpit_timer_platdata *plat = dev_get_platdata(dev); u32 val; val = ~(REG32_TMR(CH_CNT(1))+0xffffffff); - *count = timer_conv_64(val); - return 0; + return timer_conv_64(val); } static int atcpit_timer_probe(struct udevice *dev) diff --git a/drivers/timer/atmel_pit_timer.c b/drivers/timer/atmel_pit_timer.c index 843d670b5e..9f0ad1d703 100644 --- a/drivers/timer/atmel_pit_timer.c +++ b/drivers/timer/atmel_pit_timer.c @@ -25,15 +25,13 @@ struct atmel_pit_platdata { struct atmel_pit_regs *regs; }; -static int atmel_pit_get_count(struct udevice *dev, u64 *count) +static u64 atmel_pit_get_count(struct udevice *dev) { struct atmel_pit_platdata *plat = dev_get_platdata(dev); struct atmel_pit_regs *const regs = plat->regs; u32 val = readl(®s->value_image); - *count = timer_conv_64(val); - - return 0; + return timer_conv_64(val); } static int atmel_pit_probe(struct udevice *dev) diff --git a/drivers/timer/cadence-ttc.c b/drivers/timer/cadence-ttc.c index e6b6dfe376..bebb2c2e90 100644 --- a/drivers/timer/cadence-ttc.c +++ b/drivers/timer/cadence-ttc.c @@ -57,13 +57,11 @@ ulong timer_get_boot_us(void) } #endif -static int cadence_ttc_get_count(struct udevice *dev, u64 *count) +static u64 cadence_ttc_get_count(struct udevice *dev) { struct cadence_ttc_priv *priv = dev_get_priv(dev); - *count = readl(&priv->regs->counter_val1); - - return 0; + return readl(&priv->regs->counter_val1); } static int cadence_ttc_probe(struct udevice *dev) diff --git a/drivers/timer/dw-apb-timer.c b/drivers/timer/dw-apb-timer.c index 35271b20c8..68bc258131 100644 --- a/drivers/timer/dw-apb-timer.c +++ b/drivers/timer/dw-apb-timer.c @@ -25,7 +25,7 @@ struct dw_apb_timer_priv { struct reset_ctl_bulk resets; }; -static int dw_apb_timer_get_count(struct udevice *dev, u64 *count) +static u64 dw_apb_timer_get_count(struct udevice *dev) { struct dw_apb_timer_priv *priv = dev_get_priv(dev); @@ -34,9 +34,7 @@ static int dw_apb_timer_get_count(struct udevice *dev, u64 *count) * requires the count to be incrementing. Invert the * result. */ - *count = timer_conv_64(~readl(priv->regs + DW_APB_CURR_VAL)); - - return 0; + return timer_conv_64(~readl(priv->regs + DW_APB_CURR_VAL)); } static int dw_apb_timer_probe(struct udevice *dev) diff --git a/drivers/timer/mchp-pit64b-timer.c b/drivers/timer/mchp-pit64b-timer.c index ead8c9b84a..ad962098b3 100644 --- a/drivers/timer/mchp-pit64b-timer.c +++ b/drivers/timer/mchp-pit64b-timer.c @@ -27,16 +27,14 @@ struct mchp_pit64b_priv { void __iomem *base; }; -static int mchp_pit64b_get_count(struct udevice *dev, u64 *count) +static u64 mchp_pit64b_get_count(struct udevice *dev) { struct mchp_pit64b_priv *priv = dev_get_priv(dev); u32 lsb = readl(priv->base + MCHP_PIT64B_TLSBR); u32 msb = readl(priv->base + MCHP_PIT64B_TMSBR); - *count = ((u64)msb << 32) | lsb; - - return 0; + return ((u64)msb << 32) | lsb; } static int mchp_pit64b_probe(struct udevice *dev) diff --git a/drivers/timer/mpc83xx_timer.c b/drivers/timer/mpc83xx_timer.c index ad8bb28e8b..ba7704225a 100644 --- a/drivers/timer/mpc83xx_timer.c +++ b/drivers/timer/mpc83xx_timer.c @@ -187,7 +187,7 @@ void wait_ticks(ulong ticks) WATCHDOG_RESET(); } -static int mpc83xx_timer_get_count(struct udevice *dev, u64 *count) +static u64 mpc83xx_timer_get_count(struct udevice *dev) { u32 tbu, tbl; @@ -201,9 +201,7 @@ static int mpc83xx_timer_get_count(struct udevice *dev, u64 *count) tbl = mftb(); } while (tbu != mftbu()); - *count = (tbu * 0x10000ULL) + tbl; - - return 0; + return (tbu * 0x10000ULL) + tbl; } static int mpc83xx_timer_probe(struct udevice *dev) diff --git a/drivers/timer/mtk_timer.c b/drivers/timer/mtk_timer.c index 69ed521811..74e9ea34ff 100644 --- a/drivers/timer/mtk_timer.c +++ b/drivers/timer/mtk_timer.c @@ -27,14 +27,12 @@ struct mtk_timer_priv { void __iomem *base; }; -static int mtk_timer_get_count(struct udevice *dev, u64 *count) +static u64 mtk_timer_get_count(struct udevice *dev) { struct mtk_timer_priv *priv = dev_get_priv(dev); u32 val = readl(priv->base + MTK_GPT4_CNT); - *count = timer_conv_64(val); - - return 0; + return timer_conv_64(val); } static int mtk_timer_probe(struct udevice *dev) diff --git a/drivers/timer/nomadik-mtu-timer.c b/drivers/timer/nomadik-mtu-timer.c index 7ff921385a..d7f7ca4eff 100644 --- a/drivers/timer/nomadik-mtu-timer.c +++ b/drivers/timer/nomadik-mtu-timer.c @@ -54,14 +54,12 @@ struct nomadik_mtu_priv { struct nomadik_mtu_timer_regs *timer; }; -static int nomadik_mtu_get_count(struct udevice *dev, u64 *count) +static u64 nomadik_mtu_get_count(struct udevice *dev) { struct nomadik_mtu_priv *priv = dev_get_priv(dev); /* Decrementing counter: invert the value */ - *count = timer_conv_64(~readl(&priv->timer->cv)); - - return 0; + return timer_conv_64(~readl(&priv->timer->cv)); } static int nomadik_mtu_probe(struct udevice *dev) diff --git a/drivers/timer/omap-timer.c b/drivers/timer/omap-timer.c index cf3d27b96b..4eecb3e64d 100644 --- a/drivers/timer/omap-timer.c +++ b/drivers/timer/omap-timer.c @@ -48,13 +48,11 @@ struct omap_timer_priv { struct omap_gptimer_regs *regs; }; -static int omap_timer_get_count(struct udevice *dev, u64 *count) +static u64 omap_timer_get_count(struct udevice *dev) { struct omap_timer_priv *priv = dev_get_priv(dev); - *count = timer_conv_64(readl(&priv->regs->tcrr)); - - return 0; + return timer_conv_64(readl(&priv->regs->tcrr)); } static int omap_timer_probe(struct udevice *dev) diff --git a/drivers/timer/ostm_timer.c b/drivers/timer/ostm_timer.c index bea97159eb..bb0636a071 100644 --- a/drivers/timer/ostm_timer.c +++ b/drivers/timer/ostm_timer.c @@ -27,13 +27,11 @@ struct ostm_priv { fdt_addr_t regs; }; -static int ostm_get_count(struct udevice *dev, u64 *count) +static u64 ostm_get_count(struct udevice *dev) { struct ostm_priv *priv = dev_get_priv(dev); - *count = timer_conv_64(readl(priv->regs + OSTM_CNT)); - - return 0; + return timer_conv_64(readl(priv->regs + OSTM_CNT)); } static int ostm_probe(struct udevice *dev) diff --git a/drivers/timer/riscv_timer.c b/drivers/timer/riscv_timer.c index 449fcfcfd5..21ae184057 100644 --- a/drivers/timer/riscv_timer.c +++ b/drivers/timer/riscv_timer.c @@ -16,22 +16,19 @@ #include <timer.h> #include <asm/csr.h> -static int riscv_timer_get_count(struct udevice *dev, u64 *count) +static u64 riscv_timer_get_count(struct udevice *dev) { - if (IS_ENABLED(CONFIG_64BIT)) { - *count = csr_read(CSR_TIME); - } else { - u32 hi, lo; + __maybe_unused u32 hi, lo; - do { - hi = csr_read(CSR_TIMEH); - lo = csr_read(CSR_TIME); - } while (hi != csr_read(CSR_TIMEH)); + if (IS_ENABLED(CONFIG_64BIT)) + return csr_read(CSR_TIME); - *count = ((u64)hi << 32) | lo; - } + do { + hi = csr_read(CSR_TIMEH); + lo = csr_read(CSR_TIME); + } while (hi != csr_read(CSR_TIMEH)); - return 0; + return ((u64)hi << 32) | lo; } static int riscv_timer_probe(struct udevice *dev) diff --git a/drivers/timer/rockchip_timer.c b/drivers/timer/rockchip_timer.c index 7a5a484252..53cdf09810 100644 --- a/drivers/timer/rockchip_timer.c +++ b/drivers/timer/rockchip_timer.c @@ -88,14 +88,13 @@ ulong timer_get_boot_us(void) } #endif -static int rockchip_timer_get_count(struct udevice *dev, u64 *count) +static u64 rockchip_timer_get_count(struct udevice *dev) { struct rockchip_timer_priv *priv = dev_get_priv(dev); uint64_t cntr = rockchip_timer_get_curr_value(priv->timer); /* timers are down-counting */ - *count = ~0ull - cntr; - return 0; + return ~0ull - cntr; } static int rockchip_clk_ofdata_to_platdata(struct udevice *dev) diff --git a/drivers/timer/sandbox_timer.c b/drivers/timer/sandbox_timer.c index 6a503c2f15..135c0f38a4 100644 --- a/drivers/timer/sandbox_timer.c +++ b/drivers/timer/sandbox_timer.c @@ -29,11 +29,9 @@ unsigned long notrace timer_early_get_rate(void) return SANDBOX_TIMER_RATE; } -static notrace int sandbox_timer_get_count(struct udevice *dev, u64 *count) +static notrace u64 sandbox_timer_get_count(struct udevice *dev) { - *count = timer_early_get_count(); - - return 0; + return timer_early_get_count(); } static int sandbox_timer_probe(struct udevice *dev) diff --git a/drivers/timer/sti-timer.c b/drivers/timer/sti-timer.c index ff42056abd..e6843ebb33 100644 --- a/drivers/timer/sti-timer.c +++ b/drivers/timer/sti-timer.c @@ -17,7 +17,7 @@ struct sti_timer_priv { struct globaltimer *global_timer; }; -static int sti_timer_get_count(struct udevice *dev, u64 *count) +static u64 sti_timer_get_count(struct udevice *dev) { struct sti_timer_priv *priv = dev_get_priv(dev); struct globaltimer *global_timer = priv->global_timer; @@ -34,9 +34,7 @@ static int sti_timer_get_count(struct udevice *dev, u64 *count) old = high; } timer = high; - *count = (u64)((timer << 32) | low); - - return 0; + return (u64)((timer << 32) | low); } static int sti_timer_probe(struct udevice *dev) diff --git a/drivers/timer/stm32_timer.c b/drivers/timer/stm32_timer.c index c57fa3f557..f517d5e61f 100644 --- a/drivers/timer/stm32_timer.c +++ b/drivers/timer/stm32_timer.c @@ -52,14 +52,12 @@ struct stm32_timer_priv { struct stm32_timer_regs *base; }; -static int stm32_timer_get_count(struct udevice *dev, u64 *count) +static u64 stm32_timer_get_count(struct udevice *dev) { struct stm32_timer_priv *priv = dev_get_priv(dev); struct stm32_timer_regs *regs = priv->base; - *count = readl(®s->cnt); - - return 0; + return readl(®s->cnt); } static int stm32_timer_probe(struct udevice *dev) diff --git a/drivers/timer/timer-uclass.c b/drivers/timer/timer-uclass.c index f8a092b8cb..62d0e860e8 100644 --- a/drivers/timer/timer-uclass.c +++ b/drivers/timer/timer-uclass.c @@ -34,7 +34,8 @@ int notrace timer_get_count(struct udevice *dev, u64 *count) if (!ops->get_count) return -ENOSYS; - return ops->get_count(dev, count); + *count = ops->get_count(dev); + return 0; } unsigned long notrace timer_get_rate(struct udevice *dev) diff --git a/drivers/timer/tsc_timer.c b/drivers/timer/tsc_timer.c index 93c959ff44..abc0a1da05 100644 --- a/drivers/timer/tsc_timer.c +++ b/drivers/timer/tsc_timer.c @@ -386,13 +386,11 @@ void __udelay(unsigned long usec) #endif } -static int tsc_timer_get_count(struct udevice *dev, u64 *count) +static u64 tsc_timer_get_count(struct udevice *dev) { u64 now_tick = rdtsc(); - *count = now_tick - gd->arch.tsc_base; - - return 0; + return now_tick - gd->arch.tsc_base; } static void tsc_timer_ensure_setup(bool early) diff --git a/drivers/tpm/cr50_i2c.c b/drivers/tpm/cr50_i2c.c index 64831a4223..a761e3d52f 100644 --- a/drivers/tpm/cr50_i2c.c +++ b/drivers/tpm/cr50_i2c.c @@ -494,13 +494,13 @@ static int process_reset(struct udevice *dev) continue; } - log_warning("TPM ready after %ld ms\n", get_timer(start)); + log_debug("TPM ready after %ld ms\n", get_timer(start)); return 0; } while (get_timer(start) < TIMEOUT_INIT_MS); - log_warning("TPM failed to reset after %ld ms, status: %#x\n", - get_timer(start), access); + log_err("TPM failed to reset after %ld ms, status: %#x\n", + get_timer(start), access); return -EPERM; } @@ -539,7 +539,7 @@ static int claim_locality(struct udevice *dev, int loc) log_err("Failed to claim locality\n"); return -EPERM; } - log_info("Claimed locality %d\n", loc); + log_debug("Claimed locality %d\n", loc); priv->locality = loc; return 0; @@ -577,7 +577,7 @@ static int cr50_i2c_cleanup(struct udevice *dev) { struct cr50_priv *priv = dev_get_priv(dev); - printf("%s: cleanup %d\n", __func__, priv->locality); + log_debug("cleanup %d\n", priv->locality); if (priv->locality != -1) release_locality(dev, 1); diff --git a/fs/btrfs/btrfs.c b/fs/btrfs/btrfs.c index cbf9dcffeb..e48972ffa2 100644 --- a/fs/btrfs/btrfs.c +++ b/fs/btrfs/btrfs.c @@ -150,7 +150,7 @@ int btrfs_ls(const char *path) } ret = btrfs_iter_dir(root, ino, show_dir); if (ret < 0) { - error("An error occured while listing directory %s", path); + error("An error occurred while listing directory %s", path); return ret; } return 0; @@ -257,7 +257,7 @@ int btrfs_read(const char *file, void *buf, loff_t offset, loff_t len, ret = btrfs_file_read(root, ino, offset, len, buf); if (ret < 0) { - error("An error occured while reading file %s", file); + error("An error occurred while reading file %s", file); return ret; } diff --git a/include/_exports.h b/include/_exports.h index 1e9ba86108..aeb666c847 100644 --- a/include/_exports.h +++ b/include/_exports.h @@ -8,7 +8,7 @@ #define EXPORT_FUNC(a, b, c, ...) #endif EXPORT_FUNC(get_version, unsigned long, get_version, void) - EXPORT_FUNC(getc, int, getc, void) + EXPORT_FUNC(getchar, int, getc, void) EXPORT_FUNC(tstc, int, tstc, void) EXPORT_FUNC(putc, void, putc, const char) EXPORT_FUNC(puts, void, puts, const char *) diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 3ae1894a98..82294cbdc5 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -496,7 +496,7 @@ int gpio_claim_vector(const int *gpio_num_array, const char *fmt); * @list_name: Name of GPIO list (e.g. "board-id-gpios") * @index: Index number of the GPIO in that list use request (0=first) * @desc: Returns GPIO description information. If there is no such - * GPIO, dev->dev will be NULL. + * GPIO, @desc->dev will be NULL. * @flags: Indicates the GPIO input/output settings (GPIOD_...) * @return 0 if OK, -ENOENT if the GPIO does not exist, -EINVAL if there is * something wrong with the list, or other -ve for another error (e.g. diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index d121b395df..b513b4bc68 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -92,7 +92,6 @@ /* RTC */ #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) -#define CONFIG_RTC_PCF8563 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 #endif diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index bcd8aee7c3..362e2892d1 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -168,7 +168,6 @@ #define CONFIG_SYS_FSL_I2C_SPEED 400000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x3100 -#define CONFIG_RTC_PCF8563 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index e9e3981060..c1968048a7 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -143,8 +143,7 @@ #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \ "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \ - "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \ - " bootfs${boot_bank}\0" \ + "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0" \ "uimage=" CONFIG_KM_UIMAGE_NAME \ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI @@ -160,6 +159,7 @@ "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0" \ "testbootcmd=setenv boot_bank ${test_bank}; " \ "run ${subbootcmds}; reset\0" \ + "env_version=1\0" \ "" #ifndef CONFIG_KM_DEF_ENV diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index fde8487178..7bfe12fecb 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -21,6 +21,9 @@ /* Reserve 4 MB for malloc */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +/* Increase max size of compressed kernel */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ + /****************************************************************************** * (PRAM usage) * ... ------------------------------------------------------- @@ -53,6 +56,7 @@ "protect on " __stringify(BOOTFLASH_START) " +${filesize}\0"\ "set_fdthigh=true\0" \ "checkfdt=true\0" \ + "bootm_mapsize=" __stringify(CONFIG_SYS_BOOTM_LEN) "\0" \ "" #endif /* __CONFIG_KEYMILE_POWERPC_H */ diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 79edfa728a..98e0ce1c24 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -35,6 +35,9 @@ /* Reserve 4 MB for malloc */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +/* Increase max size of compressed kernel */ +#define CONFIG_SYS_BOOTM_LEN (32 << 20) + #include "asm/arch/config.h" #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index fb3a83ce67..ec1254e747 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -125,10 +125,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); */ #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) -#define CONFIG_KM_CRAMFS_ADDR 0x2000000 -#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ -#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ - /* * Local Bus Definitions */ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 9498a03f40..df2a613eaf 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -50,7 +50,6 @@ * RTC configuration */ #define RTC -#define CONFIG_RTC_PCF8563 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ /* EEPROM */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index b7a7dc0a64..ab4214c265 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -279,7 +279,6 @@ unsigned long get_board_sys_clk(void); */ #define RTC #ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_RTC_PCF8563 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 #else #define CONFIG_RTC_DS3231 1 diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 2271f26a6b..c25d6bd82b 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2017-2020 ABB + * Copyright (C) 2017-2020 Hitachi Power Grids * */ #ifndef __CONFIG_SOCFPGA_SECU1_H__ diff --git a/include/display_options.h b/include/display_options.h index a0dabca2b8..049688e39e 100644 --- a/include/display_options.h +++ b/include/display_options.h @@ -24,7 +24,7 @@ void print_size(uint64_t size, const char *suffix); /** * print_freq() - Print a frequency with a suffix * - * Print frequencies as "x.xx GHz", "xxx KHz", etc as needed; allow for + * Print frequencies as "x.xx GHz", "xxx kHz", etc as needed; allow for * optional trailing string (like "\n") * * @freq: Frequency to print in Hz diff --git a/include/dm/uclass.h b/include/dm/uclass.h index 67ff7466c8..7188304304 100644 --- a/include/dm/uclass.h +++ b/include/dm/uclass.h @@ -224,7 +224,8 @@ int uclass_get_device_by_ofnode(enum uclass_id id, ofnode node, * * @id: uclass ID to look up * @phandle_id: the phandle id to look up - * @devp: Returns pointer to device (there is only one for each node) + * @devp: Returns pointer to device (there is only one for each node). NULL if + * there is no such device. * @return 0 if OK, -ENODEV if there is no device match the phandle, other * -ve on error */ diff --git a/include/dt-bindings/reset/ast2500-reset.h b/include/dt-bindings/reset/ast2500-reset.h index d1b6b23fc1..cc85a31edf 100644 --- a/include/dt-bindings/reset/ast2500-reset.h +++ b/include/dt-bindings/reset/ast2500-reset.h @@ -1,44 +1,49 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017 Google, Inc + * Copyright 2020 ASPEED Technology Inc. */ #ifndef _ABI_MACH_ASPEED_AST2500_RESET_H_ #define _ABI_MACH_ASPEED_AST2500_RESET_H_ -/* - * The values are intentionally layed out as flags in - * WDT reset parameter. - */ - -#define AST_RESET_SOC 0 -#define AST_RESET_CHIP 1 -#define AST_RESET_CPU (1 << 1) -#define AST_RESET_ARM (1 << 2) -#define AST_RESET_COPROC (1 << 3) -#define AST_RESET_SDRAM (1 << 4) -#define AST_RESET_AHB (1 << 5) -#define AST_RESET_I2C (1 << 6) -#define AST_RESET_MAC1 (1 << 7) -#define AST_RESET_MAC2 (1 << 8) -#define AST_RESET_GCRT (1 << 9) -#define AST_RESET_USB20 (1 << 10) -#define AST_RESET_USB11_HOST (1 << 11) -#define AST_RESET_USB11_HID (1 << 12) -#define AST_RESET_VIDEO (1 << 13) -#define AST_RESET_HAC (1 << 14) -#define AST_RESET_LPC (1 << 15) -#define AST_RESET_SDIO (1 << 16) -#define AST_RESET_MIC (1 << 17) -#define AST_RESET_CRT2D (1 << 18) -#define AST_RESET_PWM (1 << 19) -#define AST_RESET_PECI (1 << 20) -#define AST_RESET_JTAG (1 << 21) -#define AST_RESET_ADC (1 << 22) -#define AST_RESET_GPIO (1 << 23) -#define AST_RESET_MCTP (1 << 24) -#define AST_RESET_XDMA (1 << 25) -#define AST_RESET_SPI (1 << 26) -#define AST_RESET_MISC (1 << 27) +#define ASPEED_RESET_CRT1 (37) +#define ASPEED_RESET_RESERVED36 (36) +#define ASPEED_RESET_RESERVED35 (35) +#define ASPEED_RESET_RESERVED34 (34) +#define ASPEED_RESET_RESERVED33 (33) +#define ASPEED_RESET_RESERVED32 (32) +#define ASPEED_RESET_RESERVED31 (31) +#define ASPEED_RESET_RESERVED30 (30) +#define ASPEED_RESET_RESERVED29 (29) +#define ASPEED_RESET_RESERVED28 (28) +#define ASPEED_RESET_RESERVED27 (27) +#define ASPEED_RESET_RESERVED26 (26) +#define ASPEED_RESET_XDMA (25) +#define ASPEED_RESET_MCTP (24) +#define ASPEED_RESET_ADC (23) +#define ASPEED_RESET_JTAG_MASTER (22) +#define ASPEED_RESET_RESERVED21 (21) +#define ASPEED_RESET_RESERVED20 (20) +#define ASPEED_RESET_RESERVED19 (19) +#define ASPEED_RESET_MIC (18) +#define ASPEED_RESET_RESERVED17 (17) +#define ASPEED_RESET_SDIO (16) +#define ASPEED_RESET_UHCI (15) +#define ASPEED_RESET_EHCI_P1 (14) +#define ASPEED_RESET_CRT (13) +#define ASPEED_RESET_MAC2 (12) +#define ASPEED_RESET_MAC1 (11) +#define ASPEED_RESET_PECI (10) +#define ASPEED_RESET_PWM (9) +#define ASPEED_RESET_PCI_VGA (8) +#define ASPEED_RESET_2D (7) +#define ASPEED_RESET_VIDEO (6) +#define ASPEED_RESET_LPC_ESPI (5) +#define ASPEED_RESET_HACE (4) +#define ASPEED_RESET_EHCI_P2 (3) +#define ASPEED_RESET_I2C (2) +#define ASPEED_RESET_AHB (1) +#define ASPEED_RESET_SDRAM (0) #endif /* _ABI_MACH_ASPEED_AST2500_RESET_H_ */ diff --git a/include/image.h b/include/image.h index 10995b8e24..4094ee588a 100644 --- a/include/image.h +++ b/include/image.h @@ -563,11 +563,21 @@ int genimg_get_cat_count(enum ih_category category); /** * genimg_get_cat_desc() - Get the description of a category * + * @category: Category to check * @return the description of a category, e.g. "architecture". This * effectively converts the enum to a string. */ const char *genimg_get_cat_desc(enum ih_category category); +/** + * genimg_cat_has_id() - Check whether a category has an item + * + * @category: Category to check + * @id: Item ID + * @return true or false as to whether a category has an item + */ +bool genimg_cat_has_id(enum ih_category category, uint id); + int genimg_get_os_id(const char *name); int genimg_get_arch_id(const char *name); int genimg_get_type_id(const char *name); diff --git a/include/log.h b/include/log.h index 4acc087b2e..6de5e611c7 100644 --- a/include/log.h +++ b/include/log.h @@ -42,7 +42,9 @@ enum log_level_t { /** * Log categories supported. Most of these correspond to uclasses (i.e. - * enum uclass_id) but there are also some more generic categories + * enum uclass_id) but there are also some more generic categories. + * + * Remember to update log_cat_name[] after adding a new category. */ enum log_category_t { LOGC_FIRST = 0, /* First part mirrors UCLASS_... */ diff --git a/include/stdio.h b/include/stdio.h index aedf374452..039f7df689 100644 --- a/include/stdio.h +++ b/include/stdio.h @@ -5,7 +5,7 @@ #include <linux/compiler.h> /* stdin */ -int getc(void); +int getchar(void); int tstc(void); /* stdout */ diff --git a/include/timer.h b/include/timer.h index 8b9fa51c53..a044cb034e 100644 --- a/include/timer.h +++ b/include/timer.h @@ -6,12 +6,12 @@ #ifndef _TIMER_H_ #define _TIMER_H_ -/* - * dm_timer_init - initialize a timer for time keeping. On success +/** + * dm_timer_init() - initialize a timer for time keeping. On success * initializes gd->timer so that lib/timer can use it for future * referrence. * - * @return - 0 on success or error number + * Return: 0 on success or error number */ int dm_timer_init(void); @@ -30,49 +30,54 @@ int dm_timer_init(void); */ int timer_timebase_fallback(struct udevice *dev); -/* - * timer_conv_64 - convert 32-bit counter value to 64-bit - * +/** + * timer_conv_64() - convert 32-bit counter value to 64-bit * @count: 32-bit counter value - * @return: 64-bit counter value + * + * Return: 64-bit counter value */ u64 timer_conv_64(u32 count); -/* - * Get the current timer count - * +/** + * timer_get_count() - Get the current timer count * @dev: The timer device * @count: pointer that returns the current timer count - * @return: 0 if OK, -ve on error + * + * Return: 0 if OK, -ve on error */ int timer_get_count(struct udevice *dev, u64 *count); -/* - * Get the timer input clock frequency - * +/** + * timer_get_rate() - Get the timer input clock frequency * @dev: The timer device - * @return: the timer input clock frequency + * + * Return: the timer input clock frequency */ unsigned long timer_get_rate(struct udevice *dev); -/* +/** * struct timer_ops - Driver model timer operations * * The uclass interface is implemented by all timer devices which use * driver model. */ struct timer_ops { - /* - * Get the current timer count + /** + * @get_count: Get the current timer count * * @dev: The timer device - * @count: pointer that returns the current 64-bit timer count - * @return: 0 if OK, -ve on error + * + * This function may be called at any time after the driver is probed. + * All necessary initialization must be completed by the time probe() + * returns. The count returned by this functions should be monotonic. + * This function must succeed. + * + * Return: The current 64-bit timer count */ - int (*get_count)(struct udevice *dev, u64 *count); + u64 (*get_count)(struct udevice *dev); }; -/* +/** * struct timer_dev_priv - information about a device used by the uclass * * @clock_rate: the timer input clock frequency @@ -84,7 +89,7 @@ struct timer_dev_priv { /** * timer_early_get_count() - Implement timer_get_count() before driver model * - * If CONFIG_TIMER_EARLY is enabled, this function wil be called to return + * If ``CONFIG_TIMER_EARLY`` is enabled, this function wil be called to return * the current timer value before the proper driver model timer is ready. * It should be implemented by one of the timer values. This is mostly useful * for tracing. @@ -94,7 +99,7 @@ u64 timer_early_get_count(void); /** * timer_early_get_rate() - Get the timer rate before driver model * - * If CONFIG_TIMER_EARLY is enabled, this function wil be called to return + * If ``CONFIG_TIMER_EARLY`` is enabled, this function wil be called to return * the current timer rate in Hz before the proper driver model timer is ready. * It should be implemented by one of the timer values. This is mostly useful * for tracing. This corresponds to the clock_rate value in struct diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h index eec8ab75b9..a7c8ed781b 100644 --- a/include/xen/interface/xen.h +++ b/include/xen/interface/xen.h @@ -76,6 +76,12 @@ #define __HYPERVISOR_arch_6 54 #define __HYPERVISOR_arch_7 55 +/* + * Commands to HYPERVISOR_console_io(). + */ +#define CONSOLEIO_write 0 +#define CONSOLEIO_read 1 + #ifndef __ASSEMBLY__ typedef u16 domid_t; diff --git a/lib/charset.c b/lib/charset.c index a28034ee1f..5686d6fb59 100644 --- a/lib/charset.c +++ b/lib/charset.c @@ -104,7 +104,7 @@ static u8 read_console(void *data) { int ch; - ch = getc(); + ch = getchar(); if (ch < 0) ch = 0; return ch; diff --git a/lib/display_options.c b/lib/display_options.c index ea9977cc18..b2025eeb5c 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -54,7 +54,7 @@ void print_freq(uint64_t freq, const char *s) { unsigned long m = 0; uint32_t f; - static const char names[] = {'G', 'M', 'K'}; + static const char names[] = {'G', 'M', 'k'}; unsigned long d = 1e9; char c = 0; unsigned int i; diff --git a/lib/efi_loader/efi_console.c b/lib/efi_loader/efi_console.c index 426de77951..011accab78 100644 --- a/lib/efi_loader/efi_console.c +++ b/lib/efi_loader/efi_console.c @@ -76,7 +76,7 @@ static int term_get_char(s32 *c) if (timer_get_us() > timeout) return 1; - *c = getc(); + *c = getchar(); return 0; } @@ -269,7 +269,7 @@ static int query_console_serial(int *rows, int *cols) /* Empty input buffer */ while (tstc()) - getc(); + getchar(); /* * Not all terminals understand CSI [18t for querying the console size. @@ -634,13 +634,13 @@ static int analyze_modifiers(struct efi_key_state *key_state) { int c, mod = 0, ret = 0; - c = getc(); + c = getchar(); if (c != ';') { ret = c; if (c == '~') goto out; - c = getc(); + c = getchar(); } for (;;) { switch (c) { @@ -649,7 +649,7 @@ static int analyze_modifiers(struct efi_key_state *key_state) mod += c - '0'; /* fall through */ case ';': - c = getc(); + c = getchar(); break; default: goto out; @@ -692,25 +692,25 @@ static efi_status_t efi_cin_read_key(struct efi_key_data *key) * Xterm Control Sequences * https://www.xfree86.org/4.8.0/ctlseqs.html */ - ch = getc(); + ch = getchar(); switch (ch) { case cESC: /* ESC */ pressed_key.scan_code = 23; break; case 'O': /* F1 - F4, End */ - ch = getc(); + ch = getchar(); /* consider modifiers */ if (ch == 'F') { /* End */ pressed_key.scan_code = 6; break; } else if (ch < 'P') { set_shift_mask(ch - '0', &key->key_state); - ch = getc(); + ch = getchar(); } pressed_key.scan_code = ch - 'P' + 11; break; case '[': - ch = getc(); + ch = getchar(); switch (ch) { case 'A'...'D': /* up, down right, left */ pressed_key.scan_code = ch - 'A' + 1; @@ -868,7 +868,7 @@ static void efi_cin_check(void) static void efi_cin_empty_buffer(void) { while (tstc()) - getc(); + getchar(); key_available = false; } diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index dc4f0b050c..dabe329336 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1412,7 +1412,6 @@ CONFIG_RTC_MC13XXX CONFIG_RTC_MCFRRTC CONFIG_RTC_MCP79411 CONFIG_RTC_MXS -CONFIG_RTC_PCF8563 CONFIG_RTC_PT7C4338 CONFIG_RUN_FROM_DDR0 CONFIG_RUN_FROM_DDR1 diff --git a/test/dm/usb.c b/test/dm/usb.c index db4b8ba0f7..5d6ceefce0 100644 --- a/test/dm/usb.c +++ b/test/dm/usb.c @@ -427,7 +427,7 @@ static int dm_test_usb_keyb(struct unit_test_state *uts) for (c = pos->result; *c; ++c) { ut_asserteq(1, tstc()); - ut_asserteq(*c, getc()); + ut_asserteq(*c, getchar()); } ut_asserteq(0, tstc()); } diff --git a/tools/image-host.c b/tools/image-host.c index 8886beff17..7cef78eab8 100644 --- a/tools/image-host.c +++ b/tools/image-host.c @@ -293,8 +293,8 @@ static int fit_image_read_data(char *filename, unsigned char *data, /* Check file size */ if (sbuf.st_size != expected_size) { - printf("File %s don't have the expected size (size=%ld, expected=%d)\n", - filename, sbuf.st_size, expected_size); + printf("File %s don't have the expected size (size=%lld, expected=%d)\n", + filename, (long long)sbuf.st_size, expected_size); goto err; } @@ -308,8 +308,8 @@ static int fit_image_read_data(char *filename, unsigned char *data, /* Check that we have read all the file */ if (n != sbuf.st_size) { - printf("Can't read all file %s (read %zd bytes, expexted %ld)\n", - filename, n, sbuf.st_size); + printf("Can't read all file %s (read %zd bytes, expexted %lld)\n", + filename, n, (long long)sbuf.st_size); goto err; } diff --git a/tools/mkimage.c b/tools/mkimage.c index 43078d075c..e78608293e 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -51,8 +51,13 @@ static int show_valid_options(enum ih_category category) return -ENOMEM; /* Sort the names in order of short name for easier reading */ - for (item = 0; item < count; item++) - order[item] = item; + for (i = 0, item = 0; i < count; i++, item++) { + while (!genimg_cat_has_id(category, item) && i < count) { + item++; + count--; + } + order[i] = item; + } cur_category = category; qsort(order, count, sizeof(int), h_compare_category_name); |