diff options
64 files changed, 148 insertions, 148 deletions
diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c index 9d787197f3..c10571fa28 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9260_devices.c @@ -219,7 +219,7 @@ static const struct at91_port_plat at91sam9260_plat[] = { { ATMEL_BASE_PIOC, "PC" }, }; -U_BOOT_DEVICES(at91sam9260_gpios) = { +U_BOOT_DRVINFOS(at91sam9260_gpios) = { { "atmel_at91rm9200_gpio", &at91sam9260_plat[0] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[1] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[2] }, diff --git a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c index f503553b92..d517810c99 100644 --- a/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c +++ b/arch/arm/mach-at91/arm926ejs/at91sam9m10g45_devices.c @@ -175,7 +175,7 @@ static const struct at91_port_plat at91sam9260_plat[] = { { ATMEL_BASE_PIOE, "PE" }, }; -U_BOOT_DEVICES(at91sam9260_gpios) = { +U_BOOT_DRVINFOS(at91sam9260_gpios) = { { "atmel_at91rm9200_gpio", &at91sam9260_plat[0] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[1] }, { "atmel_at91rm9200_gpio", &at91sam9260_plat[2] }, diff --git a/arch/arm/mach-imx/mx6/soc.c b/arch/arm/mach-imx/mx6/soc.c index 1649f6d948..bf6dddfdc9 100644 --- a/arch/arm/mach-imx/mx6/soc.c +++ b/arch/arm/mach-imx/mx6/soc.c @@ -44,7 +44,7 @@ static const struct imx_thermal_plat imx6_thermal_plat = { .fuse_word = 6, }; -U_BOOT_DEVICE(imx6_thermal) = { +U_BOOT_DRVINFO(imx6_thermal) = { .name = "imx_thermal", .plat = &imx6_thermal_plat, }; diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 13593994f1..fda25ba66a 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -60,7 +60,7 @@ static const struct imx_thermal_plat imx7_thermal_plat = { .fuse_word = 3, }; -U_BOOT_DEVICE(imx7_thermal) = { +U_BOOT_DRVINFO(imx7_thermal) = { .name = "imx_thermal", .plat = &imx7_thermal_plat, }; diff --git a/arch/arm/mach-lpc32xx/devices.c b/arch/arm/mach-lpc32xx/devices.c index 04e026a8b7..e1e2e0d094 100644 --- a/arch/arm/mach-lpc32xx/devices.c +++ b/arch/arm/mach-lpc32xx/devices.c @@ -62,7 +62,7 @@ static const struct lpc32xx_hsuart_plat lpc32xx_hsuart[] = { }; #endif -U_BOOT_DEVICES(lpc32xx_uarts) = { +U_BOOT_DRVINFOS(lpc32xx_uarts) = { #if defined(CONFIG_LPC32XX_HSUART) { "lpc32xx_hsuart", &lpc32xx_hsuart[0], }, { "lpc32xx_hsuart", &lpc32xx_hsuart[1], }, @@ -124,7 +124,7 @@ void lpc32xx_i2c_init(unsigned int devnum) writel(ctrl, &clk->i2cclk_ctrl); } -U_BOOT_DEVICE(lpc32xx_gpios) = { +U_BOOT_DRVINFO(lpc32xx_gpios) = { .name = "gpio_lpc32xx" }; diff --git a/arch/arm/mach-omap2/am33xx/board.c b/arch/arm/mach-omap2/am33xx/board.c index b5f2b75e24..e17898d8fb 100644 --- a/arch/arm/mach-omap2/am33xx/board.c +++ b/arch/arm/mach-omap2/am33xx/board.c @@ -99,7 +99,7 @@ static const struct ns16550_plat am33xx_serial[] = { # endif }; -U_BOOT_DEVICES(am33xx_uarts) = { +U_BOOT_DRVINFOS(am33xx_uarts) = { { "ns16550_serial", &am33xx_serial[0] }, # ifdef CONFIG_SYS_NS16550_COM2 { "ns16550_serial", &am33xx_serial[1] }, @@ -119,7 +119,7 @@ static const struct omap_i2c_plat am33xx_i2c[] = { { I2C_BASE3, 100000, OMAP_I2C_REV_V2}, }; -U_BOOT_DEVICES(am33xx_i2c) = { +U_BOOT_DRVINFOS(am33xx_i2c) = { { "i2c_omap", &am33xx_i2c[0] }, { "i2c_omap", &am33xx_i2c[1] }, { "i2c_omap", &am33xx_i2c[2] }, @@ -138,7 +138,7 @@ static const struct omap_gpio_plat am33xx_gpio[] = { #endif }; -U_BOOT_DEVICES(am33xx_gpios) = { +U_BOOT_DRVINFOS(am33xx_gpios) = { { "gpio_omap", &am33xx_gpio[0] }, { "gpio_omap", &am33xx_gpio[1] }, { "gpio_omap", &am33xx_gpio[2] }, @@ -155,7 +155,7 @@ static const struct omap3_spi_plat omap3_spi_pdata = { .pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT, }; -U_BOOT_DEVICE(am33xx_spi) = { +U_BOOT_DRVINFO(am33xx_spi) = { .name = "omap3_spi", .plat = &omap3_spi_pdata, }; @@ -234,7 +234,7 @@ static struct ti_musb_plat usb1 = { }, }; -U_BOOT_DEVICES(am33xx_usbs) = { +U_BOOT_DRVINFOS(am33xx_usbs) = { #if CONFIG_AM335X_USB0_MODE == MUSB_PERIPHERAL { "ti-musb-peripheral", &usb0 }, #elif CONFIG_AM335X_USB0_MODE == MUSB_HOST diff --git a/arch/arm/mach-omap2/omap3/board.c b/arch/arm/mach-omap2/omap3/board.c index 6ffedd1769..4da8df47cc 100644 --- a/arch/arm/mach-omap2/omap3/board.c +++ b/arch/arm/mach-omap2/omap3/board.c @@ -47,7 +47,7 @@ static const struct omap_gpio_plat omap34xx_gpio[] = { { 5, OMAP34XX_GPIO6_BASE }, }; -U_BOOT_DEVICES(omap34xx_gpios) = { +U_BOOT_DRVINFOS(omap34xx_gpios) = { { "gpio_omap", &omap34xx_gpio[0] }, { "gpio_omap", &omap34xx_gpio[1] }, { "gpio_omap", &omap34xx_gpio[2] }, diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index bf01aa5ee8..9de9836c8d 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -264,7 +264,7 @@ static struct ns16550_plat ns16550_com1_pdata = { .fcr = UART_FCR_DEFVAL, }; -U_BOOT_DEVICE(ns16550_com1) = { +U_BOOT_DRVINFO(ns16550_com1) = { "ns16550_serial", &ns16550_com1_pdata }; #endif diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c index 48c4f32d6f..8569ad7c6f 100644 --- a/arch/arm/mach-tegra/board2.c +++ b/arch/arm/mach-tegra/board2.c @@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD /* TODO(sjg@chromium.org): Remove once SPL supports device tree */ -U_BOOT_DEVICE(tegra_gpios) = { +U_BOOT_DRVINFO(tegra_gpios) = { "gpio_tegra" }; #endif diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c index 21bea62e9b..3c56fa1c01 100644 --- a/board/armltd/integrator/integrator.c +++ b/board/armltd/integrator/integrator.c @@ -43,7 +43,7 @@ static const struct pl01x_serial_plat serial_plat = { #endif }; -U_BOOT_DEVICE(integrator_serials) = { +U_BOOT_DRVINFO(integrator_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/armltd/total_compute/total_compute.c b/board/armltd/total_compute/total_compute.c index 6263d0c361..da24b32333 100644 --- a/board/armltd/total_compute/total_compute.c +++ b/board/armltd/total_compute/total_compute.c @@ -15,7 +15,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = CONFIG_PL011_CLOCK, }; -U_BOOT_DEVICE(total_compute_serials) = { +U_BOOT_DRVINFO(total_compute_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 6df6bcd3cf..bd66d52cb7 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -26,7 +26,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = CONFIG_PL011_CLOCK, }; -U_BOOT_DEVICE(vexpress_serials) = { +U_BOOT_DRVINFO(vexpress_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/bluewater/gurnard/gurnard.c b/board/bluewater/gurnard/gurnard.c index a71b4eb733..17ecdb679e 100644 --- a/board/bluewater/gurnard/gurnard.c +++ b/board/bluewater/gurnard/gurnard.c @@ -420,7 +420,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, }; -U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/bluewater/snapper9260/snapper9260.c b/board/bluewater/snapper9260/snapper9260.c index 9e41a42263..58fab15c11 100644 --- a/board/bluewater/snapper9260/snapper9260.c +++ b/board/bluewater/snapper9260/snapper9260.c @@ -147,7 +147,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, }; -U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c index 29db51b026..c26793d76c 100644 --- a/board/cadence/xtfpga/xtfpga.c +++ b/board/cadence/xtfpga/xtfpga.c @@ -93,7 +93,7 @@ int misc_init_r(void) return 0; } -U_BOOT_DEVICE(sysreset) = { +U_BOOT_DRVINFO(sysreset) = { .name = "xtfpga_sysreset", }; @@ -104,7 +104,7 @@ static struct ethoc_eth_pdata ethoc_pdata = { .packet_base = CONFIG_SYS_ETHOC_BUFFER_ADDR, }; -U_BOOT_DEVICE(ethoc) = { +U_BOOT_DRVINFO(ethoc) = { .name = "ethoc", .plat = ðoc_pdata, }; diff --git a/board/cavium/thunderx/thunderx.c b/board/cavium/thunderx/thunderx.c index 22c4c72361..fd23472898 100644 --- a/board/cavium/thunderx/thunderx.c +++ b/board/cavium/thunderx/thunderx.c @@ -25,7 +25,7 @@ static const struct pl01x_serial_plat serial0 = { .skip_init = true, }; -U_BOOT_DEVICE(thunderx_serial0) = { +U_BOOT_DRVINFO(thunderx_serial0) = { .name = "serial_pl01x", .plat = &serial0, }; @@ -37,7 +37,7 @@ static const struct pl01x_serial_plat serial1 = { .skip_init = true, }; -U_BOOT_DEVICE(thunderx_serial1) = { +U_BOOT_DRVINFO(thunderx_serial1) = { .name = "serial_pl01x", .plat = &serial1, }; diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index bc3ce4d16c..7520e96e07 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -728,7 +728,7 @@ static struct mxc_serial_plat cm_fx6_mxc_serial_plat = { .reg = (struct mxc_uart *)UART4_BASE, }; -U_BOOT_DEVICE(cm_fx6_serial) = { +U_BOOT_DRVINFO(cm_fx6_serial) = { .name = "serial_mxc", .plat = &cm_fx6_mxc_serial_plat, }; diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index a8ece170ce..a08858550d 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -363,7 +363,7 @@ static const struct ns16550_plat serial_pdata = { .fcr = UART_FCR_DEFVAL, }; -U_BOOT_DEVICE(omapl138_uart) = { +U_BOOT_DRVINFO(omapl138_uart) = { .name = "ns16550_serial", .plat = &serial_pdata, }; @@ -379,7 +379,7 @@ static const struct davinci_mmc_plat mmc_plat = { .name = "da830-mmc", }, }; -U_BOOT_DEVICE(omapl138_mmc) = { +U_BOOT_DRVINFO(omapl138_mmc) = { .name = "ti_da830_mmc", .plat = &mmc_plat, }; diff --git a/board/freescale/ls1012afrdm/eth.c b/board/freescale/ls1012afrdm/eth.c index 85104ab22c..d2df9351ea 100644 --- a/board/freescale/ls1012afrdm/eth.c +++ b/board/freescale/ls1012afrdm/eth.c @@ -114,12 +114,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, }; -U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, }; -U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/ls1012aqds/eth.c b/board/freescale/ls1012aqds/eth.c index f6f43d2b13..8189f41bec 100644 --- a/board/freescale/ls1012aqds/eth.c +++ b/board/freescale/ls1012aqds/eth.c @@ -298,12 +298,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, }; -U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, }; -U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c index 5e923e5252..2241d061dd 100644 --- a/board/freescale/ls1012ardb/eth.c +++ b/board/freescale/ls1012ardb/eth.c @@ -160,12 +160,12 @@ static struct pfe_eth_pdata pfe_pdata1 = { }, }; -U_BOOT_DEVICE(ls1012a_pfe0) = { +U_BOOT_DRVINFO(ls1012a_pfe0) = { .name = "pfe_eth", .plat = &pfe_pdata0, }; -U_BOOT_DEVICE(ls1012a_pfe1) = { +U_BOOT_DRVINFO(ls1012a_pfe1) = { .name = "pfe_eth", .plat = &pfe_pdata1, }; diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 8d0115eace..70dd34e7ce 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -62,7 +62,7 @@ static struct pl01x_serial_plat serial0 = { .type = TYPE_PL011, }; -U_BOOT_DEVICE(nxp_serial0) = { +U_BOOT_DRVINFO(nxp_serial0) = { .name = "serial_pl01x", .plat = &serial0, }; @@ -72,7 +72,7 @@ static struct pl01x_serial_plat serial1 = { .type = TYPE_PL011, }; -U_BOOT_DEVICE(nxp_serial1) = { +U_BOOT_DRVINFO(nxp_serial1) = { .name = "serial_pl01x", .plat = &serial1, }; diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index c7224d1efe..048f624c35 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1375,7 +1375,7 @@ static struct mxc_serial_plat ventana_mxc_serial_plat = { .reg = (struct mxc_uart *)UART2_BASE, }; -U_BOOT_DEVICE(ventana_serial) = { +U_BOOT_DRVINFO(ventana_serial) = { .name = "serial_mxc", .plat = &ventana_mxc_serial_plat, }; diff --git a/board/hisilicon/hikey/hikey.c b/board/hisilicon/hikey/hikey.c index 0ac88306d0..65a8179adb 100644 --- a/board/hisilicon/hikey/hikey.c +++ b/board/hisilicon/hikey/hikey.c @@ -50,7 +50,7 @@ static const struct hikey_gpio_plat hi6220_gpio[] = { }; -U_BOOT_DEVICES(hi6220_gpios) = { +U_BOOT_DRVINFOS(hi6220_gpios) = { { "gpio_hi6220", &hi6220_gpio[0] }, { "gpio_hi6220", &hi6220_gpio[1] }, { "gpio_hi6220", &hi6220_gpio[2] }, @@ -89,7 +89,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 19200000 }; -U_BOOT_DEVICE(hikey_seriala) = { +U_BOOT_DRVINFO(hikey_seriala) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/hisilicon/hikey960/hikey960.c b/board/hisilicon/hikey960/hikey960.c index 04b8cde136..3fe4c60d02 100644 --- a/board/hisilicon/hikey960/hikey960.c +++ b/board/hisilicon/hikey960/hikey960.c @@ -32,7 +32,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 19200000 }; -U_BOOT_DEVICE(hikey960_serial0) = { +U_BOOT_DRVINFO(hikey960_serial0) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/hisilicon/poplar/poplar.c b/board/hisilicon/poplar/poplar.c index b8be4ce45a..bfb2c66a17 100644 --- a/board/hisilicon/poplar/poplar.c +++ b/board/hisilicon/poplar/poplar.c @@ -46,7 +46,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 75000000, }; -U_BOOT_DEVICE(poplar_serial) = { +U_BOOT_DRVINFO(poplar_serial) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 6a7da502dd..0932f62b9b 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -36,7 +36,7 @@ static const struct ns16550_plat igep_serial = { .fcr = UART_FCR_DEFVAL, }; -U_BOOT_DEVICE(igep_uart) = { +U_BOOT_DRVINFO(igep_uart) = { "ns16550_serial", &igep_serial }; diff --git a/board/lg/sniper/sniper.c b/board/lg/sniper/sniper.c index d11630b954..118ab269d6 100644 --- a/board/lg/sniper/sniper.c +++ b/board/lg/sniper/sniper.c @@ -37,7 +37,7 @@ static const struct ns16550_plat serial_omap_plat = { .fcr = UART_FCR_DEFVAL, }; -U_BOOT_DEVICE(sniper_serial) = { +U_BOOT_DRVINFO(sniper_serial) = { .name = "ns16550_serial", .plat = &serial_omap_plat }; diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index bafb6205bd..253ee3c7b2 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -709,7 +709,7 @@ static const struct omap_i2c_plat rx51_i2c[] = { { I2C_BASE3, 400000, OMAP_I2C_REV_V1 }, }; -U_BOOT_DEVICES(rx51_i2c) = { +U_BOOT_DRVINFOS(rx51_i2c) = { { "i2c_omap", &rx51_i2c[0] }, { "i2c_omap", &rx51_i2c[1] }, { "i2c_omap", &rx51_i2c[2] }, diff --git a/board/sandbox/sandbox.c b/board/sandbox/sandbox.c index 3235541a7d..d152703b15 100644 --- a/board/sandbox/sandbox.c +++ b/board/sandbox/sandbox.c @@ -23,7 +23,7 @@ gd_t *gd; #if !CONFIG_IS_ENABLED(OF_PLATDATA) /* Add a simple GPIO device */ -U_BOOT_DEVICE(gpio_sandbox) = { +U_BOOT_DRVINFO(gpio_sandbox) = { .name = "sandbox_gpio", }; #endif diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c index 1613c44929..25d85a8f17 100644 --- a/board/siemens/corvus/board.c +++ b/board/siemens/corvus/board.c @@ -318,7 +318,7 @@ static struct atmel_serial_plat at91sam9260_serial_plat = { .base_addr = ATMEL_BASE_DBGU, }; -U_BOOT_DEVICE(at91sam9260_serial) = { +U_BOOT_DRVINFO(at91sam9260_serial) = { .name = "serial_atmel", .plat = &at91sam9260_serial_plat, }; diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c index 3371973600..95e203ff0e 100644 --- a/board/st/stv0991/stv0991.c +++ b/board/st/stv0991/stv0991.c @@ -30,7 +30,7 @@ static const struct pl01x_serial_plat serial_plat = { .clock = 2700 * 1000, }; -U_BOOT_DEVICE(stv09911_serials) = { +U_BOOT_DRVINFO(stv09911_serials) = { .name = "serial_pl01x", .plat = &serial_plat, }; diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c index 42e1a80ec5..65fc60e2b4 100644 --- a/board/sysam/amcore/amcore.c +++ b/board/sysam/amcore/amcore.c @@ -113,7 +113,7 @@ static struct coldfire_serial_plat mcf5307_serial_plat = { .baudrate = CONFIG_BAUDRATE, }; -U_BOOT_DEVICE(coldfire_serial) = { +U_BOOT_DRVINFO(coldfire_serial) = { .name = "serial_coldfire", .plat = &mcf5307_serial_plat, }; diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 2aa385a937..40d2e0238f 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -927,7 +927,7 @@ struct eth_pdata cpsw_pdata = { .priv_pdata = &am335_eth_data, }; -U_BOOT_DEVICE(am335x_eth) = { +U_BOOT_DRVINFO(am335x_eth) = { .name = "eth_cpsw", .plat = &cpsw_pdata, }; @@ -972,7 +972,7 @@ static const struct omap_hsmmc_plat am335x_mmc0_plat = { .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, }; -U_BOOT_DEVICE(am335x_mmc0) = { +U_BOOT_DRVINFO(am335x_mmc0) = { .name = "omap_hsmmc", .plat = &am335x_mmc0_plat, }; @@ -986,7 +986,7 @@ static const struct omap_hsmmc_plat am335x_mmc1_plat = { .cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT, }; -U_BOOT_DEVICE(am335x_mmc1) = { +U_BOOT_DRVINFO(am335x_mmc1) = { .name = "omap_hsmmc", .plat = &am335x_mmc1_plat, }; diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 875383625d..0731fb7645 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -54,7 +54,7 @@ static const struct ns16550_plat devkit8000_serial = { .fcr = UART_FCR_DEFVAL, }; -U_BOOT_DEVICE(devkit8000_uart) = { +U_BOOT_DRVINFO(devkit8000_uart) = { "ns16550_serial", &devkit8000_serial }; diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index 362a750b19..5ae5274584 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -1149,7 +1149,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = true, }; -U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c index 056064f6b9..6ff55ce57b 100644 --- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c +++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c @@ -208,7 +208,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = 1, }; -U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri_imx6/colibri_imx6.c b/board/toradex/colibri_imx6/colibri_imx6.c index a82daad739..57d3e526b4 100644 --- a/board/toradex/colibri_imx6/colibri_imx6.c +++ b/board/toradex/colibri_imx6/colibri_imx6.c @@ -1091,7 +1091,7 @@ static struct mxc_serial_plat mxc_serial_plat = { .use_dte = true, }; -U_BOOT_DEVICE(mxc_serial) = { +U_BOOT_DRVINFO(mxc_serial) = { .name = "serial_mxc", .plat = &mxc_serial_plat, }; diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c index b9d0fb98af..645751a37e 100644 --- a/board/toradex/colibri_pxa270/colibri_pxa270.c +++ b/board/toradex/colibri_pxa270/colibri_pxa270.c @@ -133,7 +133,7 @@ static const struct pxa_mmc_plat mmc_plat = { .base = (struct pxa_mmc_regs *)MMC0_BASE, }; -U_BOOT_DEVICE(pxa_mmcs) = { +U_BOOT_DRVINFO(pxa_mmcs) = { .name = "pxa_mmc", .plat = &mmc_plat, }; @@ -146,7 +146,7 @@ static const struct pxa_serial_plat serial_plat = { .baudrate = CONFIG_BAUDRATE, }; -U_BOOT_DEVICE(pxa_serials) = { +U_BOOT_DRVINFO(pxa_serials) = { .name = "serial_pxa", .plat = &serial_plat, }; diff --git a/doc/driver-model/design.rst b/doc/driver-model/design.rst index f26e4f14df..ffed7d5f79 100644 --- a/doc/driver-model/design.rst +++ b/doc/driver-model/design.rst @@ -422,7 +422,7 @@ Device Tree While plat is useful, a more flexible way of providing device data is by using device tree. In U-Boot you should use this where possible. Avoid -sending patches which make use of the U_BOOT_DEVICE() macro unless strictly +sending patches which make use of the U_BOOT_DRVINFO() macro unless strictly necessary. With device tree we replace the above code with the following device tree @@ -436,7 +436,7 @@ fragment: sides = <4>; }; -This means that instead of having lots of U_BOOT_DEVICE() declarations in +This means that instead of having lots of U_BOOT_DRVINFO() declarations in the board file, we put these in the device tree. This approach allows a lot more generality, since the same board file can support many types of boards (e,g. with the same SoC) just by using different device trees. An added @@ -665,9 +665,9 @@ Bind stage U-Boot discovers devices using one of these two methods: -- Scan the U_BOOT_DEVICE() definitions. U-Boot looks up the name specified +- Scan the U_BOOT_DRVINFO() definitions. U-Boot looks up the name specified by each, to find the appropriate U_BOOT_DRIVER() definition. In this case, - there is no path by which driver_data may be provided, but the U_BOOT_DEVICE() + there is no path by which driver_data may be provided, but the U_BOOT_DRVINFO() may provide plat. - Scan through the device tree definitions. U-Boot looks at top-level @@ -685,7 +685,7 @@ driver's bind() method if one is defined. At this point all the devices are known, and bound to their drivers. There is a 'struct udevice' allocated for all devices. However, nothing has been activated (except for the root device). Each bound device that was created -from a U_BOOT_DEVICE() declaration will hold the plat pointer specified +from a U_BOOT_DRVINFO() declaration will hold the plat pointer specified in that declaration. For a bound device created from the device tree, plat will be NULL, but of_offset will be the offset of the device tree node that caused the device to be created. The uclass is set correctly for @@ -726,7 +726,7 @@ The steps are: 2. If plat_auto is non-zero, then the platform data space is allocated. This is only useful for device tree operation, since otherwise you would have to specific the platform data in the - U_BOOT_DEVICE() declaration. The space is allocated for the device and + U_BOOT_DRVINFO() declaration. The space is allocated for the device and zeroed. It will be accessible as dev->plat. 3. If the device's uclass specifies a non-zero per_device_auto, @@ -746,7 +746,7 @@ The steps are: do various calls like dev_read_u32(dev, ...) to access the node and store the resulting information into dev->plat. After this point, the device works the same way whether it was bound using a device tree node or - U_BOOT_DEVICE() structure. In either case, the platform data is now stored + U_BOOT_DRVINFO() structure. In either case, the platform data is now stored in the plat structure. Typically you will use the plat_auto feature to specify the size of the platform data structure, and U-Boot will automatically allocate and zero it for you before @@ -855,7 +855,7 @@ remove it. This performs the probe steps in reverse: 4. The device memory is freed (platform data, private data, uclass data, parent data). - Note: Because the platform data for a U_BOOT_DEVICE() is defined with a + Note: Because the platform data for a U_BOOT_DRVINFO() is defined with a static pointer, it is not de-allocated during the remove() method. For a device instantiated using the device tree data, the platform data will be dynamically allocated, and thus needs to be deallocated during the @@ -931,7 +931,7 @@ property can provide better control granularity on which device is bound before relocation. While with DM_FLAG_PRE_RELOC flag of the driver all devices with the same driver are bound, which requires allocation a large amount of memory. When device tree is not used, DM_FLAG_PRE_RELOC is the -only way for statically declared devices via U_BOOT_DEVICE() to be bound +only way for statically declared devices via U_BOOT_DRVINFO() to be bound prior to relocation. It is possible to limit this to specific relocation steps, by using diff --git a/doc/driver-model/of-plat.rst b/doc/driver-model/of-plat.rst index afa27c211c..39e6295aa0 100644 --- a/doc/driver-model/of-plat.rst +++ b/doc/driver-model/of-plat.rst @@ -21,7 +21,7 @@ SoCs require a 16KB SPL image which must include a full MMC stack. In this case the overhead of device tree access may be too great. It is possible to create platform data manually by defining C structures -for it, and reference that data in a U_BOOT_DEVICE() declaration. This +for it, and reference that data in a U_BOOT_DRVINFO() declaration. This bypasses the use of device tree completely, effectively creating a parallel configuration mechanism. But it is an available option for SPL. @@ -79,7 +79,7 @@ SPL/TPL and should be tested with: A new tool called 'dtoc' converts a device tree file either into a set of struct declarations, one for each compatible node, and a set of -U_BOOT_DEVICE() declarations along with the actual platform data for each +U_BOOT_DRVINFO() declarations along with the actual platform data for each device. As an example, consider this MMC node: .. code-block:: none @@ -155,7 +155,7 @@ and the following device declarations: .card_detect_delay = 0xc8, }; - U_BOOT_DEVICE(dwmmc_at_ff0c0000) = { + U_BOOT_DRVINFO(dwmmc_at_ff0c0000) = { .name = "rockchip_rk3288_dw_mshc", .plat = &dtv_dwmmc_at_ff0c0000, .plat_size = sizeof(dtv_dwmmc_at_ff0c0000), @@ -178,7 +178,7 @@ platform data in the driver. The of_to_plat() method should therefore do nothing in such a driver. Note that for the platform data to be matched with a driver, the 'name' -property of the U_BOOT_DEVICE() declaration has to match a driver declared +property of the U_BOOT_DRVINFO() declaration has to match a driver declared via U_BOOT_DRIVER(). This effectively means that a U_BOOT_DRIVER() with a 'name' corresponding to the devicetree 'compatible' string (after converting it to a valid name for C) is needed, so a dedicated driver is required for @@ -189,7 +189,7 @@ used to declare an alias for a driver name, typically a 'compatible' string. This macro produces no code, but it is by dtoc tool. The parent_idx is the index of the parent driver_info structure within its -linker list (instantiated by the U_BOOT_DEVICE() macro). This is used to support +linker list (instantiated by the U_BOOT_DRVINFO() macro). This is used to support dev_get_parent(). The dm_populate_phandle_data() is included to allow for fix-ups required by dtoc. It is not currently used. The values in 'clocks' are the index of the driver_info for the target device followed by any phandle @@ -339,7 +339,7 @@ prevents them being used inadvertently. All usage must be bracketed with The dt-plat.c file contains the device declarations and is is built in spl/dt-plat.c. It additionally contains the definition of dm_populate_phandle_data() which is responsible of filling the phandle -information by adding references to U_BOOT_DEVICE by using DM_GET_DEVICE +information by adding references to U_BOOT_DRVINFO by using DM_GET_DEVICE The pylibfdt Python module is used to access the devicetree. diff --git a/doc/driver-model/remoteproc-framework.rst b/doc/driver-model/remoteproc-framework.rst index edb09cc105..566495a21c 100644 --- a/doc/driver-model/remoteproc-framework.rst +++ b/doc/driver-model/remoteproc-framework.rst @@ -125,7 +125,7 @@ a simplified definition of a device is as follows: .driver_plat_data = &mydriver_data; }; - U_BOOT_DEVICE(proc_3_demo) = { + U_BOOT_DRVINFO(proc_3_demo) = { .name = "sandbox_test_proc", .plat = &proc_3_test, }; diff --git a/doc/driver-model/spi-howto.rst b/doc/driver-model/spi-howto.rst index f1c4167139..97fbf750cb 100644 --- a/doc/driver-model/spi-howto.rst +++ b/doc/driver-model/spi-howto.rst @@ -270,7 +270,7 @@ fills in the fields from device tree. Add the platform data [non-device-tree only] -------------------------------------------- -Specify this data in a U_BOOT_DEVICE() declaration in your board file: +Specify this data in a U_BOOT_DRVINFO() declaration in your board file: .. code-block:: c @@ -281,7 +281,7 @@ Specify this data in a U_BOOT_DEVICE() declaration in your board file: .deactivate_delay_us = ... }; - U_BOOT_DEVICE(board_spi0) = { + U_BOOT_DRVINFO(board_spi0) = { .name = "exynos_spi", .plat = &platdata_spi0, }; diff --git a/drivers/crypto/fsl/fsl_rsa.c b/drivers/crypto/fsl/fsl_rsa.c index ed2a54f6ec..897ee855ea 100644 --- a/drivers/crypto/fsl/fsl_rsa.c +++ b/drivers/crypto/fsl/fsl_rsa.c @@ -55,6 +55,6 @@ U_BOOT_DRIVER(fsl_rsa_mod_exp) = { .ops = &fsl_mod_exp_ops, }; -U_BOOT_DEVICE(fsl_rsa) = { +U_BOOT_DRVINFO(fsl_rsa) = { .name = "fsl_rsa_mod_exp", }; diff --git a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c index 4ce85b3224..7bed444c3f 100644 --- a/drivers/crypto/rsa_mod_exp/mod_exp_sw.c +++ b/drivers/crypto/rsa_mod_exp/mod_exp_sw.c @@ -35,6 +35,6 @@ U_BOOT_DRIVER(mod_exp_sw) = { .flags = DM_FLAG_PRE_RELOC, }; -U_BOOT_DEVICE(mod_exp_sw) = { +U_BOOT_DRVINFO(mod_exp_sw) = { .name = "mod_exp_sw", }; diff --git a/drivers/demo/demo-pdata.c b/drivers/demo/demo-pdata.c index b504c31373..818f77503a 100644 --- a/drivers/demo/demo-pdata.c +++ b/drivers/demo/demo-pdata.c @@ -20,27 +20,27 @@ static const struct dm_demo_pdata yellow_hexagon = { .sides = 6. }; -U_BOOT_DEVICE(demo0) = { +U_BOOT_DRVINFO(demo0) = { .name = "demo_shape_drv", .plat = &red_square, }; -U_BOOT_DEVICE(demo1) = { +U_BOOT_DRVINFO(demo1) = { .name = "demo_simple_drv", .plat = &red_square, }; -U_BOOT_DEVICE(demo2) = { +U_BOOT_DRVINFO(demo2) = { .name = "demo_shape_drv", .plat = &green_triangle, }; -U_BOOT_DEVICE(demo3) = { +U_BOOT_DRVINFO(demo3) = { .name = "demo_simple_drv", .plat = &yellow_hexagon, }; -U_BOOT_DEVICE(demo4) = { +U_BOOT_DRVINFO(demo4) = { .name = "demo_shape_drv", .plat = &yellow_hexagon, }; diff --git a/drivers/gpio/imx_rgpio2p.c b/drivers/gpio/imx_rgpio2p.c index a5a290a00c..0e2874ca95 100644 --- a/drivers/gpio/imx_rgpio2p.c +++ b/drivers/gpio/imx_rgpio2p.c @@ -158,7 +158,7 @@ static int imx_rgpio2p_bind(struct udevice *dev) /* * If plat already exsits, directly return. * Actually only when DT is not supported, plat - * is statically initialized in U_BOOT_DEVICES.Here + * is statically initialized in U_BOOT_DRVINFOS.Here * will return. */ if (plat) @@ -216,7 +216,7 @@ static const struct imx_rgpio2p_plat imx_plat[] = { { 5, (struct gpio_regs *)RGPIO2P_GPIO6_BASE_ADDR }, }; -U_BOOT_DEVICES(imx_rgpio2ps) = { +U_BOOT_DRVINFOS(imx_rgpio2ps) = { { "imx_rgpio2p", &imx_plat[0] }, { "imx_rgpio2p", &imx_plat[1] }, { "imx_rgpio2p", &imx_plat[2] }, diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 9fc217ae6a..6280fb5984 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -372,7 +372,7 @@ static const struct mxc_gpio_plat mxc_plat[] = { #endif }; -U_BOOT_DEVICES(mxc_gpios) = { +U_BOOT_DRVINFOS(mxc_gpios) = { { "gpio_mxc", &mxc_plat[0] }, { "gpio_mxc", &mxc_plat[1] }, { "gpio_mxc", &mxc_plat[2] }, diff --git a/drivers/remoteproc/sandbox_testproc.c b/drivers/remoteproc/sandbox_testproc.c index ee2ee73071..6836eca4c5 100644 --- a/drivers/remoteproc/sandbox_testproc.c +++ b/drivers/remoteproc/sandbox_testproc.c @@ -352,7 +352,7 @@ static struct dm_rproc_uclass_pdata proc_3_test = { .mem_type = RPROC_INTERNAL_MEMORY_MAPPED, }; -U_BOOT_DEVICE(proc_3_demo) = { +U_BOOT_DRVINFO(proc_3_demo) = { .name = "sandbox_test_proc", .plat = &proc_3_test, }; diff --git a/drivers/rtc/emul_rtc.c b/drivers/rtc/emul_rtc.c index 1dc80ca127..8f0e1ab5ac 100644 --- a/drivers/rtc/emul_rtc.c +++ b/drivers/rtc/emul_rtc.c @@ -91,6 +91,6 @@ U_BOOT_DRIVER(rtc_emul) = { .priv_auto = sizeof(struct emul_rtc), }; -U_BOOT_DEVICE(rtc_emul) = { +U_BOOT_DRVINFO(rtc_emul) = { .name = "rtc_emul", }; diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index 19368ba256..756738c2d2 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -241,7 +241,7 @@ static const struct sandbox_serial_plat platdata_non_fdt = { .colour = -1, }; -U_BOOT_DEVICE(serial_sandbox_non_fdt) = { +U_BOOT_DRVINFO(serial_sandbox_non_fdt) = { .name = "sandbox_serial", .plat = &platdata_non_fdt, }; diff --git a/drivers/sysreset/sysreset_sandbox.c b/drivers/sysreset/sysreset_sandbox.c index 8eca7d8bfd..08685823e9 100644 --- a/drivers/sysreset/sysreset_sandbox.c +++ b/drivers/sysreset/sysreset_sandbox.c @@ -47,7 +47,7 @@ static int sandbox_sysreset_request(struct udevice *dev, enum sysreset_t type) /* * If we have a device tree, the device we created from platform data - * (see the U_BOOT_DEVICE() declaration below) should not do anything. + * (see the U_BOOT_DRVINFO() declaration below) should not do anything. * If we are that device, return an error. */ if (state->fdt_fname && !dev_has_ofnode(dev)) @@ -135,7 +135,7 @@ U_BOOT_DRIVER(warm_sysreset_sandbox) = { #if !CONFIG_IS_ENABLED(OF_PLATDATA) /* This is here in case we don't have a device tree */ -U_BOOT_DEVICE(sysreset_sandbox_non_fdt) = { +U_BOOT_DRVINFO(sysreset_sandbox_non_fdt) = { .name = "sysreset_sandbox", }; #endif diff --git a/drivers/timer/sandbox_timer.c b/drivers/timer/sandbox_timer.c index 135c0f38a4..2075cd4edd 100644 --- a/drivers/timer/sandbox_timer.c +++ b/drivers/timer/sandbox_timer.c @@ -65,6 +65,6 @@ U_BOOT_DRIVER(sandbox_timer) = { }; /* This is here in case we don't have a device tree */ -U_BOOT_DEVICE(sandbox_timer_non_fdt) = { +U_BOOT_DRVINFO(sandbox_timer_non_fdt) = { .name = "sandbox_timer", }; diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c index 50657a77d3..a3e21aa5f1 100644 --- a/drivers/video/sunxi/sunxi_de2.c +++ b/drivers/video/sunxi/sunxi_de2.c @@ -319,7 +319,7 @@ U_BOOT_DRIVER(sunxi_de2) = { .flags = DM_FLAG_PRE_RELOC, }; -U_BOOT_DEVICE(sunxi_de2) = { +U_BOOT_DRVINFO(sunxi_de2) = { .name = "sunxi_de2" }; diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c b/drivers/video/sunxi/sunxi_dw_hdmi.c index 3e8d71538f..0b8cefc311 100644 --- a/drivers/video/sunxi/sunxi_dw_hdmi.c +++ b/drivers/video/sunxi/sunxi_dw_hdmi.c @@ -398,6 +398,6 @@ U_BOOT_DRIVER(sunxi_dw_hdmi) = { .priv_auto = sizeof(struct sunxi_dw_hdmi_priv), }; -U_BOOT_DEVICE(sunxi_dw_hdmi) = { +U_BOOT_DRVINFO(sunxi_dw_hdmi) = { .name = "sunxi_dw_hdmi" }; diff --git a/drivers/video/sunxi/sunxi_lcd.c b/drivers/video/sunxi/sunxi_lcd.c index dd2bb1f5fc..635edf6dd3 100644 --- a/drivers/video/sunxi/sunxi_lcd.c +++ b/drivers/video/sunxi/sunxi_lcd.c @@ -146,7 +146,7 @@ U_BOOT_DRIVER(sunxi_lcd) = { }; #ifdef CONFIG_MACH_SUN50I -U_BOOT_DEVICE(sunxi_lcd) = { +U_BOOT_DRVINFO(sunxi_lcd) = { .name = "sunxi_lcd" }; #endif diff --git a/dts/Kconfig b/dts/Kconfig index aeda542f98..71f50552e4 100644 --- a/dts/Kconfig +++ b/dts/Kconfig @@ -346,13 +346,13 @@ config SPL_OF_PLATDATA former can add 3KB or more to a Thumb 2 Image. This option enables generation of platform data from the device - tree as C code. This code creates devices using U_BOOT_DEVICE() + tree as C code. This code creates devices using U_BOOT_DRVINFO() declarations. The benefit is that it allows driver code to access the platform data directly in C structures, avoidin the libfdt overhead. This option works by generating C structure declarations for each - compatible string, then adding platform data and U_BOOT_DEVICE + compatible string, then adding platform data and U_BOOT_DRVINFO declarations for each node. See of-plat.txt for more information. config SPL_OF_PLATDATA_PARENT @@ -376,13 +376,13 @@ config TPL_OF_PLATDATA former can add 3KB or more to a Thumb 2 Image. This option enables generation of platform data from the device - tree as C code. This code creates devices using U_BOOT_DEVICE() + tree as C code. This code creates devices using U_BOOT_DRVINFO() declarations. The benefit is that it allows driver code to access the platform data directly in C structures, avoidin the libfdt overhead. This option works by generating C structure declarations for each - compatible string, then adding platform data and U_BOOT_DEVICE + compatible string, then adding platform data and U_BOOT_DRVINFO declarations for each node. See of-plat.txt for more information. config TPL_OF_PLATDATA_PARENT diff --git a/include/dm/device.h b/include/dm/device.h index 4469804a00..e16ba2405f 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -104,7 +104,7 @@ enum { * particular port or peripheral (essentially a driver instance). * * A device will come into existence through a 'bind' call, either due to - * a U_BOOT_DEVICE() macro (in which case plat is non-NULL) or a node + * a U_BOOT_DRVINFO() macro (in which case plat is non-NULL) or a node * in the device tree (in which case of_offset is >= 0). In the latter case * we translate the device tree information into plat in a function * implemented by the driver of_to_plat method (called just before the @@ -293,7 +293,7 @@ struct udevice_id { * platform data to be allocated in the device's ->plat pointer. * This is typically only useful for device-tree-aware drivers (those with * an of_match), since drivers which use plat will have the data - * provided in the U_BOOT_DEVICE() instantiation. + * provided in the U_BOOT_DRVINFO() instantiation. * @per_child_auto: Each device can hold private data owned by * its parent. If required this will be automatically allocated if this * value is non-zero. diff --git a/include/dm/lists.h b/include/dm/lists.h index 070bc9c19f..1a86552546 100644 --- a/include/dm/lists.h +++ b/include/dm/lists.h @@ -35,7 +35,7 @@ struct uclass_driver *lists_uclass_lookup(enum uclass_id id); /** * lists_bind_drivers() - search for and bind all drivers to parent * - * This searches the U_BOOT_DEVICE() structures and creates new devices for + * This searches the U_BOOT_DRVINFO() structures and creates new devices for * each one. The devices will have @parent as their parent. * * @parent: parent device (root) diff --git a/include/dm/platdata.h b/include/dm/platdata.h index d650fb3919..e2b16ce6e4 100644 --- a/include/dm/platdata.h +++ b/include/dm/platdata.h @@ -56,31 +56,31 @@ struct driver_rt { * is not feasible (e.g. serial driver in SPL where <8KB of SRAM is * available). U-Boot's driver model uses device tree for configuration. * - * When of-platdata is in use, U_BOOT_DEVICE() cannot be used outside of the + * When of-platdata is in use, U_BOOT_DRVINFO() cannot be used outside of the * dt-plat.c file created by dtoc */ #if CONFIG_IS_ENABLED(OF_PLATDATA) && !defined(DT_PLATDATA_C) -#define U_BOOT_DEVICE(__name) _Static_assert(false, \ - "Cannot use U_BOOT_DEVICE with of-platdata. Please use devicetree instead") +#define U_BOOT_DRVINFO(__name) _Static_assert(false, \ + "Cannot use U_BOOT_DRVINFO with of-platdata. Please use devicetree instead") #else -#define U_BOOT_DEVICE(__name) \ +#define U_BOOT_DRVINFO(__name) \ ll_entry_declare(struct driver_info, __name, driver_info) #endif /* Declare a list of devices. The argument is a driver_info[] array */ -#define U_BOOT_DEVICES(__name) \ +#define U_BOOT_DRVINFOS(__name) \ ll_entry_declare_list(struct driver_info, __name, driver_info) /** * Get a pointer to a given device info given its name * - * With the declaration U_BOOT_DEVICE(name), DM_GET_DEVICE(name) will return a + * With the declaration U_BOOT_DRVINFO(name), DM_GET_DEVICE(name) will return a * pointer to the struct driver_info created by that declaration. * * if OF_PLATDATA is enabled, from this it is possible to use the @dev member of * struct driver_info to find the device pointer itself. * - * TODO(sjg@chromium.org): U_BOOT_DEVICE() tells U-Boot to create a device, so + * TODO(sjg@chromium.org): U_BOOT_DRVINFO() tells U-Boot to create a device, so * the naming seems sensible, but DM_GET_DEVICE() is a bit of misnomer, since it * finds the driver_info record, not the device. * @@ -93,7 +93,7 @@ struct driver_rt { /** * dm_populate_phandle_data() - Populates phandle data in platda * - * This populates phandle data with an U_BOOT_DEVICE entry get by + * This populates phandle data with an U_BOOT_DRVINFO entry get by * DM_GET_DEVICE. The implementation of this function will be done * by dtoc when parsing dtb. */ diff --git a/include/dm/platform_data/spi_pl022.h b/include/dm/platform_data/spi_pl022.h index c5aa321291..7f74b3cbc5 100644 --- a/include/dm/platform_data/spi_pl022.h +++ b/include/dm/platform_data/spi_pl022.h @@ -3,7 +3,7 @@ * (C) Copyright 2018 * Quentin Schulz, Bootlin, quentin.schulz@bootlin.com * - * Structure for use with U_BOOT_DEVICE for pl022 SPI devices or to use + * Structure for use with U_BOOT_DRVINFO for pl022 SPI devices or to use * in of_to_plat. */ diff --git a/test/dm/core.c b/test/dm/core.c index 580d171e30..82b7a668dd 100644 --- a/test/dm/core.c +++ b/test/dm/core.c @@ -43,17 +43,17 @@ static const struct dm_test_pdata test_pdata_pre_reloc = { .ping_add = TEST_INTVAL_PRE_RELOC, }; -U_BOOT_DEVICE(dm_test_info1) = { +U_BOOT_DRVINFO(dm_test_info1) = { .name = "test_drv", .plat = &test_pdata[0], }; -U_BOOT_DEVICE(dm_test_info2) = { +U_BOOT_DRVINFO(dm_test_info2) = { .name = "test_drv", .plat = &test_pdata[1], }; -U_BOOT_DEVICE(dm_test_info3) = { +U_BOOT_DRVINFO(dm_test_info3) = { .name = "test_drv", .plat = &test_pdata[2], }; diff --git a/tools/dtoc/dtb_platdata.py b/tools/dtoc/dtb_platdata.py index 7bd1989113..ebe5132e14 100644 --- a/tools/dtoc/dtb_platdata.py +++ b/tools/dtoc/dtb_platdata.py @@ -713,14 +713,14 @@ class DtbPlatdata(): def _declare_device(self, var_name, struct_name, node_parent): """Add a device declaration to the output - This declares a U_BOOT_DEVICE() for the device being processed + This declares a U_BOOT_DRVINFO() for the device being processed Args: var_name (str): C name for the node struct_name (str): Name for the dt struct associated with the node node_parent (Node): Parent of the node (or None if none) """ - self.buf('U_BOOT_DEVICE(%s) = {\n' % var_name) + self.buf('U_BOOT_DRVINFO(%s) = {\n' % var_name) self.buf('\t.name\t\t= "%s",\n' % struct_name) self.buf('\t.plat\t= &%s%s,\n' % (VAL_PREFIX, var_name)) self.buf('\t.plat_size\t= sizeof(%s%s),\n' % (VAL_PREFIX, var_name)) @@ -783,14 +783,14 @@ class DtbPlatdata(): """Generate device defintions for the platform data This writes out C platform data initialisation data and - U_BOOT_DEVICE() declarations for each valid node. Where a node has + U_BOOT_DRVINFO() declarations for each valid node. Where a node has multiple compatible strings, a #define is used to make them equivalent. See the documentation in doc/driver-model/of-plat.rst for more information. """ self.out_header() - self.out('/* Allow use of U_BOOT_DEVICE() in this file */\n') + self.out('/* Allow use of U_BOOT_DRVINFO() in this file */\n') self.out('#define DT_PLATDATA_C\n') self.out('\n') self.out('#include <common.h>\n') diff --git a/tools/dtoc/test_dtoc.py b/tools/dtoc/test_dtoc.py index fb65f284ce..dbd4e3bf1d 100755 --- a/tools/dtoc/test_dtoc.py +++ b/tools/dtoc/test_dtoc.py @@ -44,7 +44,7 @@ C_HEADER = '''/* * This file was generated by dtoc from a .dtb (device tree binary) file. */ -/* Allow use of U_BOOT_DEVICE() in this file */ +/* Allow use of U_BOOT_DRVINFO() in this file */ #define DT_PLATDATA_C #include <common.h> @@ -214,7 +214,7 @@ struct dtd_sandbox_spl_test { /* Node /i2c@0 index 0 */ static struct dtd_sandbox_i2c_test dtv_i2c_at_0 = { }; -U_BOOT_DEVICE(i2c_at_0) = { +U_BOOT_DRVINFO(i2c_at_0) = { \t.name\t\t= "sandbox_i2c_test", \t.plat\t= &dtv_i2c_at_0, \t.plat_size\t= sizeof(dtv_i2c_at_0), @@ -226,7 +226,7 @@ static struct dtd_sandbox_pmic_test dtv_pmic_at_9 = { \t.low_power\t\t= true, \t.reg\t\t\t= {0x9, 0x0}, }; -U_BOOT_DEVICE(pmic_at_9) = { +U_BOOT_DRVINFO(pmic_at_9) = { \t.name\t\t= "sandbox_pmic_test", \t.plat\t= &dtv_pmic_at_9, \t.plat_size\t= sizeof(dtv_pmic_at_9), @@ -246,7 +246,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test = { \t.stringarray\t\t= {"multi-word", "message", ""}, \t.stringval\t\t= "message", }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -265,7 +265,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test2 = { \t.stringarray\t\t= {"another", "multi-word", "message"}, \t.stringval\t\t= "message2", }; -U_BOOT_DEVICE(spl_test2) = { +U_BOOT_DRVINFO(spl_test2) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test2, \t.plat_size\t= sizeof(dtv_spl_test2), @@ -278,7 +278,7 @@ static struct dtd_sandbox_spl_test dtv_spl_test3 = { \t\t0x0}, \t.stringarray\t\t= {"one", "", ""}, }; -U_BOOT_DEVICE(spl_test3) = { +U_BOOT_DRVINFO(spl_test3) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test3, \t.plat_size\t= sizeof(dtv_spl_test3), @@ -333,7 +333,7 @@ static struct dtd_sandbox_gpio dtv_gpios_at_0 = { \t.gpio_controller\t= true, \t.sandbox_gpio_count\t= 0x14, }; -U_BOOT_DEVICE(gpios_at_0) = { +U_BOOT_DRVINFO(gpios_at_0) = { \t.name\t\t= "sandbox_gpio", \t.plat\t= &dtv_gpios_at_0, \t.plat_size\t= sizeof(dtv_gpios_at_0), @@ -365,7 +365,7 @@ struct dtd_invalid { /* Node /spl-test index 0 */ static struct dtd_invalid dtv_spl_test = { }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "invalid", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -400,7 +400,7 @@ struct dtd_target { static struct dtd_target dtv_phandle2_target = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(phandle2_target) = { +U_BOOT_DRVINFO(phandle2_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle2_target, \t.plat_size\t= sizeof(dtv_phandle2_target), @@ -411,7 +411,7 @@ U_BOOT_DEVICE(phandle2_target) = { static struct dtd_target dtv_phandle3_target = { \t.intval\t\t\t= 0x2, }; -U_BOOT_DEVICE(phandle3_target) = { +U_BOOT_DRVINFO(phandle3_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle3_target, \t.plat_size\t= sizeof(dtv_phandle3_target), @@ -422,7 +422,7 @@ U_BOOT_DEVICE(phandle3_target) = { static struct dtd_target dtv_phandle_target = { \t.intval\t\t\t= 0x0, }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -437,7 +437,7 @@ static struct dtd_source dtv_phandle_source = { \t\t\t{1, {12, 13}}, \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source) = { +U_BOOT_DRVINFO(phandle_source) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source, \t.plat_size\t= sizeof(dtv_phandle_source), @@ -449,7 +449,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.clocks\t\t\t= { \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -487,7 +487,7 @@ struct dtd_target { /* Node /phandle-target index 1 */ static struct dtd_target dtv_phandle_target = { }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -499,7 +499,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.clocks\t\t\t= { \t\t\t{1, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -522,7 +522,7 @@ void dm_populate_phandle_data(void) { static struct dtd_target dtv_phandle2_target = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(phandle2_target) = { +U_BOOT_DRVINFO(phandle2_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle2_target, \t.plat_size\t= sizeof(dtv_phandle2_target), @@ -533,7 +533,7 @@ U_BOOT_DEVICE(phandle2_target) = { static struct dtd_target dtv_phandle3_target = { \t.intval\t\t\t= 0x2, }; -U_BOOT_DEVICE(phandle3_target) = { +U_BOOT_DRVINFO(phandle3_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle3_target, \t.plat_size\t= sizeof(dtv_phandle3_target), @@ -544,7 +544,7 @@ U_BOOT_DEVICE(phandle3_target) = { static struct dtd_target dtv_phandle_target = { \t.intval\t\t\t= 0x0, }; -U_BOOT_DEVICE(phandle_target) = { +U_BOOT_DRVINFO(phandle_target) = { \t.name\t\t= "target", \t.plat\t= &dtv_phandle_target, \t.plat_size\t= sizeof(dtv_phandle_target), @@ -559,7 +559,7 @@ static struct dtd_source dtv_phandle_source = { \t\t\t{1, {12, 13}}, \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source) = { +U_BOOT_DRVINFO(phandle_source) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source, \t.plat_size\t= sizeof(dtv_phandle_source), @@ -571,7 +571,7 @@ static struct dtd_source dtv_phandle_source2 = { \t.cd_gpios\t\t= { \t\t\t{4, {}},}, }; -U_BOOT_DEVICE(phandle_source2) = { +U_BOOT_DRVINFO(phandle_source2) = { \t.name\t\t= "source", \t.plat\t= &dtv_phandle_source2, \t.plat_size\t= sizeof(dtv_phandle_source2), @@ -629,7 +629,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -640,7 +640,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -651,7 +651,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x1234567890123456, 0x9876543210987654, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -684,7 +684,7 @@ struct dtd_test2 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -695,7 +695,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x12345678, 0x98765432, 0x2, 0x3}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -731,7 +731,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x123400000000, 0x5678}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -742,7 +742,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x1234567890123456, 0x98765432}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -753,7 +753,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x1234567890123456, 0x98765432, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -789,7 +789,7 @@ struct dtd_test3 { static struct dtd_test1 dtv_test1 = { \t.reg\t\t\t= {0x1234, 0x567800000000}, }; -U_BOOT_DEVICE(test1) = { +U_BOOT_DRVINFO(test1) = { \t.name\t\t= "test1", \t.plat\t= &dtv_test1, \t.plat_size\t= sizeof(dtv_test1), @@ -800,7 +800,7 @@ U_BOOT_DEVICE(test1) = { static struct dtd_test2 dtv_test2 = { \t.reg\t\t\t= {0x12345678, 0x9876543210987654}, }; -U_BOOT_DEVICE(test2) = { +U_BOOT_DRVINFO(test2) = { \t.name\t\t= "test2", \t.plat\t= &dtv_test2, \t.plat_size\t= sizeof(dtv_test2), @@ -811,7 +811,7 @@ U_BOOT_DEVICE(test2) = { static struct dtd_test3 dtv_test3 = { \t.reg\t\t\t= {0x12345678, 0x9876543210987654, 0x2, 0x3}, }; -U_BOOT_DEVICE(test3) = { +U_BOOT_DRVINFO(test3) = { \t.name\t\t= "test3", \t.plat\t= &dtv_test3, \t.plat_size\t= sizeof(dtv_test3), @@ -863,7 +863,7 @@ struct dtd_sandbox_spl_test { static struct dtd_sandbox_spl_test dtv_spl_test = { \t.intval\t\t\t= 0x1, }; -U_BOOT_DEVICE(spl_test) = { +U_BOOT_DRVINFO(spl_test) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test, \t.plat_size\t= sizeof(dtv_spl_test), @@ -874,7 +874,7 @@ U_BOOT_DEVICE(spl_test) = { static struct dtd_sandbox_spl_test dtv_spl_test2 = { \t.intarray\t\t= 0x5, }; -U_BOOT_DEVICE(spl_test2) = { +U_BOOT_DRVINFO(spl_test2) = { \t.name\t\t= "sandbox_spl_test", \t.plat\t= &dtv_spl_test2, \t.plat_size\t= sizeof(dtv_spl_test2), |