diff options
178 files changed, 5620 insertions, 2637 deletions
diff --git a/.travis.yml b/.travis.yml index a061f02399c..ed07d817fa4 100644 --- a/.travis.yml +++ b/.travis.yml @@ -42,7 +42,7 @@ install: - ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname` # prepare buildman environment - echo -e "[toolchain]\nroot = /usr" > ~/.buildman - - echo -e "arc = /tmp/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman + - echo -e "arc = /tmp/arc_gnu_2018.09_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman - echo -e "\n[toolchain-alias]\nsh = sh2\n" >> ~/.buildman - cat ~/.buildman - virtualenv /tmp/venv @@ -75,8 +75,8 @@ before_script: echo -e "\n[toolchain-alias]\nx86 = i386" >> ~/.buildman; fi - if [[ "${TOOLCHAIN}" == arc ]]; then - wget https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2017.09-release/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz && - tar -C /tmp -xf arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz; + wget https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2018.09-release/arc_gnu_2018.09_prebuilt_uclibc_le_archs_linux_install.tar.gz && + tar -C /tmp -xf arc_gnu_2018.09_prebuilt_uclibc_le_archs_linux_install.tar.gz; fi - if [[ "${TOOLCHAIN}" == *xtensa* ]]; then wget https://github.com/foss-xtensa/toolchain/releases/download/2018.02/x86_64-2018.02-${TOOLCHAIN}.tar.gz && diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bec46ce04e0..cb7ec580796 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -932,6 +932,7 @@ config ARCH_ZYNQMP_R5 select DM_SERIAL select OF_CONTROL imply CMD_DM + imply DM_USB_GADGET config ARCH_ZYNQMP bool "Xilinx ZynqMP based platform" @@ -949,6 +950,7 @@ config ARCH_ZYNQMP imply CMD_DM imply FAT_WRITE imply MP + imply DM_USB_GADGET config TEGRA bool "NVIDIA Tegra" diff --git a/arch/arm/dts/am335x-evm.dts b/arch/arm/dts/am335x-evm.dts index a6f20af648a..fe272075887 100644 --- a/arch/arm/dts/am335x-evm.dts +++ b/arch/arm/dts/am335x-evm.dts @@ -80,8 +80,6 @@ gpio_keys: volume_keys@0 { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; switch@9 { @@ -723,8 +721,8 @@ &mmc3 { /* these are on the crossbar and are outlined in the xbar-event-map element */ - dmas = <&edma 12 - &edma 13>; + dmas = <&edma 12 0 + &edma 13 0>; dma-names = "tx", "rx"; status = "okay"; vmmc-supply = <&wlan_en_reg>; diff --git a/arch/arm/dts/am335x-evmsk.dts b/arch/arm/dts/am335x-evmsk.dts index b3e9b61baeb..0767578aeeb 100644 --- a/arch/arm/dts/am335x-evmsk.dts +++ b/arch/arm/dts/am335x-evmsk.dts @@ -109,8 +109,6 @@ gpio_buttons: gpio_buttons@0 { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; switch@1 { label = "button0"; diff --git a/arch/arm/dts/am335x-pdu001-u-boot.dtsi b/arch/arm/dts/am335x-pdu001-u-boot.dtsi index fbb6a3ff6bb..84a07bdef46 100644 --- a/arch/arm/dts/am335x-pdu001-u-boot.dtsi +++ b/arch/arm/dts/am335x-pdu001-u-boot.dtsi @@ -29,10 +29,18 @@ u-boot,dm-pre-reloc; }; +&mmc1 { + u-boot,dm-pre-reloc; +}; + &mmc1_pins { u-boot,dm-pre-reloc; }; +&mmc2 { + u-boot,dm-pre-reloc; +}; + &mmc2_pins { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/am335x-pdu001.dts b/arch/arm/dts/am335x-pdu001.dts index 121e2c62070..3a5e9526635 100644 --- a/arch/arm/dts/am335x-pdu001.dts +++ b/arch/arm/dts/am335x-pdu001.dts @@ -576,7 +576,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; &sham { diff --git a/arch/arm/dts/am335x-pxm2.dtsi b/arch/arm/dts/am335x-pxm2.dtsi index 8d58cd4c917..d9243d5d3d9 100644 --- a/arch/arm/dts/am335x-pxm2.dtsi +++ b/arch/arm/dts/am335x-pxm2.dtsi @@ -50,8 +50,6 @@ gpio_keys: restart-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; restart0 { diff --git a/arch/arm/dts/am335x-rut.dts b/arch/arm/dts/am335x-rut.dts index c6cfbb8033e..a5716a929f6 100644 --- a/arch/arm/dts/am335x-rut.dts +++ b/arch/arm/dts/am335x-rut.dts @@ -36,8 +36,6 @@ gpio_keys: powerfail-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; pwr-fail0 { @@ -190,12 +188,8 @@ &epwmss1 { status = "okay"; - - ehrpwm1: ehrpwm@48302200 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&epwmss1_pins>; - }; + pinctrl-names = "default"; + pinctrl-0 = <&epwmss1_pins>; }; &gpmc { diff --git a/arch/arm/dts/am33xx-clocks.dtsi b/arch/arm/dts/am33xx-clocks.dtsi index afb4b3a7bab..95d5c9d136c 100644 --- a/arch/arm/dts/am33xx-clocks.dtsi +++ b/arch/arm/dts/am33xx-clocks.dtsi @@ -8,7 +8,7 @@ * published by the Free Software Foundation. */ &scm_clocks { - sys_clkin_ck: sys_clkin_ck { + sys_clkin_ck: sys_clkin_ck@40 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; @@ -163,7 +163,7 @@ clock-frequency = <12000000>; }; - dpll_core_ck: dpll_core_ck { + dpll_core_ck: dpll_core_ck@490 { #clock-cells = <0>; compatible = "ti,am3-dpll-core-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; @@ -176,7 +176,7 @@ clocks = <&dpll_core_ck>; }; - dpll_core_m4_ck: dpll_core_m4_ck { + dpll_core_m4_ck: dpll_core_m4_ck@480 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -185,7 +185,7 @@ ti,index-starts-at-one; }; - dpll_core_m5_ck: dpll_core_m5_ck { + dpll_core_m5_ck: dpll_core_m5_ck@484 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -194,7 +194,7 @@ ti,index-starts-at-one; }; - dpll_core_m6_ck: dpll_core_m6_ck { + dpll_core_m6_ck: dpll_core_m6_ck@4d8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_core_x2_ck>; @@ -203,14 +203,14 @@ ti,index-starts-at-one; }; - dpll_mpu_ck: dpll_mpu_ck { + dpll_mpu_ck: dpll_mpu_ck@488 { #clock-cells = <0>; compatible = "ti,am3-dpll-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0488>, <0x0420>, <0x042c>; }; - dpll_mpu_m2_ck: dpll_mpu_m2_ck { + dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a8 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_mpu_ck>; @@ -219,14 +219,14 @@ ti,index-starts-at-one; }; - dpll_ddr_ck: dpll_ddr_ck { + dpll_ddr_ck: dpll_ddr_ck@494 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0494>, <0x0434>, <0x0440>; }; - dpll_ddr_m2_ck: dpll_ddr_m2_ck { + dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a0 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_ddr_ck>; @@ -243,14 +243,14 @@ clock-div = <2>; }; - dpll_disp_ck: dpll_disp_ck { + dpll_disp_ck: dpll_disp_ck@498 { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x0498>, <0x0448>, <0x0454>; }; - dpll_disp_m2_ck: dpll_disp_m2_ck { + dpll_disp_m2_ck: dpll_disp_m2_ck@4a4 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_disp_ck>; @@ -260,14 +260,14 @@ ti,set-rate-parent; }; - dpll_per_ck: dpll_per_ck { + dpll_per_ck: dpll_per_ck@48c { #clock-cells = <0>; compatible = "ti,am3-dpll-no-gate-j-type-clock"; clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; reg = <0x048c>, <0x0470>, <0x049c>; }; - dpll_per_m2_ck: dpll_per_m2_ck { + dpll_per_m2_ck: dpll_per_m2_ck@4ac { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&dpll_per_ck>; @@ -292,14 +292,6 @@ clock-div = <4>; }; - cefuse_fck: cefuse_fck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <1>; - reg = <0x0a20>; - }; - clk_24mhz: clk_24mhz { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -316,14 +308,6 @@ clock-div = <732>; }; - clkdiv32k_ick: clkdiv32k_ick { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ck>; - ti,bit-shift = <1>; - reg = <0x014c>; - }; - l3_gclk: l3_gclk { #clock-cells = <0>; compatible = "fixed-factor-clock"; @@ -332,14 +316,14 @@ clock-div = <1>; }; - pruss_ocp_gclk: pruss_ocp_gclk { + pruss_ocp_gclk: pruss_ocp_gclk@530 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; reg = <0x0530>; }; - mmu_fck: mmu_fck { + mmu_fck: mmu_fck@914 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_core_m4_ck>; @@ -347,56 +331,56 @@ reg = <0x0914>; }; - timer1_fck: timer1_fck { + timer1_fck: timer1_fck@528 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; + clocks = <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; reg = <0x0528>; }; - timer2_fck: timer2_fck { + timer2_fck: timer2_fck@508 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0508>; }; - timer3_fck: timer3_fck { + timer3_fck: timer3_fck@50c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x050c>; }; - timer4_fck: timer4_fck { + timer4_fck: timer4_fck@510 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0510>; }; - timer5_fck: timer5_fck { + timer5_fck: timer5_fck@518 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0518>; }; - timer6_fck: timer6_fck { + timer6_fck: timer6_fck@51c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x051c>; }; - timer7_fck: timer7_fck { + timer7_fck: timer7_fck@504 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; + clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0504>; }; - usbotg_fck: usbotg_fck { + usbotg_fck: usbotg_fck@47c { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_per_ck>; @@ -412,7 +396,7 @@ clock-div = <2>; }; - ieee5000_fck: ieee5000_fck { + ieee5000_fck: ieee5000_fck@e4 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&dpll_core_m4_div2_ck>; @@ -420,10 +404,10 @@ reg = <0x00e4>; }; - wdt1_fck: wdt1_fck { + wdt1_fck: wdt1_fck@538 { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; + clocks = <&clk_rc32k_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x0538>; }; @@ -483,53 +467,21 @@ clock-div = <2>; }; - cpsw_cpts_rft_clk: cpsw_cpts_rft_clk { + cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@520 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; reg = <0x0520>; }; - gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck { + gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@53c { #clock-cells = <0>; compatible = "ti,mux-clock"; - clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; + clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; reg = <0x053c>; }; - gpio0_dbclk: gpio0_dbclk { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&gpio0_dbclk_mux_ck>; - ti,bit-shift = <18>; - reg = <0x0408>; - }; - - gpio1_dbclk: gpio1_dbclk { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00ac>; - }; - - gpio2_dbclk: gpio2_dbclk { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00b0>; - }; - - gpio3_dbclk: gpio3_dbclk { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&clkdiv32k_ick>; - ti,bit-shift = <18>; - reg = <0x00b4>; - }; - - lcd_gclk: lcd_gclk { + lcd_gclk: lcd_gclk@534 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; @@ -545,7 +497,7 @@ clock-div = <2>; }; - gfx_fclk_clksel_ck: gfx_fclk_clksel_ck { + gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@52c { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; @@ -553,7 +505,7 @@ reg = <0x052c>; }; - gfx_fck_div_ck: gfx_fck_div_ck { + gfx_fck_div_ck: gfx_fck_div_ck@52c { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&gfx_fclk_clksel_ck>; @@ -561,14 +513,14 @@ ti,max-div = <2>; }; - sysclkout_pre_ck: sysclkout_pre_ck { + sysclkout_pre_ck: sysclkout_pre_ck@700 { #clock-cells = <0>; compatible = "ti,mux-clock"; clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; reg = <0x0700>; }; - clkout2_div_ck: clkout2_div_ck { + clkout2_div_ck: clkout2_div_ck@700 { #clock-cells = <0>; compatible = "ti,divider-clock"; clocks = <&sysclkout_pre_ck>; @@ -577,59 +529,7 @@ reg = <0x0700>; }; - dbg_sysclk_ck: dbg_sysclk_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&sys_clkin_ck>; - ti,bit-shift = <19>; - reg = <0x0414>; - }; - - dbg_clka_ck: dbg_clka_ck { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&dpll_core_m4_ck>; - ti,bit-shift = <30>; - reg = <0x0414>; - }; - - stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; - ti,bit-shift = <22>; - reg = <0x0414>; - }; - - trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck { - #clock-cells = <0>; - compatible = "ti,mux-clock"; - clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; - ti,bit-shift = <20>; - reg = <0x0414>; - }; - - stm_clk_div_ck: stm_clk_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&stm_pmd_clock_mux_ck>; - ti,bit-shift = <27>; - ti,max-div = <64>; - reg = <0x0414>; - ti,index-power-of-two; - }; - - trace_clk_div_ck: trace_clk_div_ck { - #clock-cells = <0>; - compatible = "ti,divider-clock"; - clocks = <&trace_pmd_clk_mux_ck>; - ti,bit-shift = <24>; - ti,max-div = <64>; - reg = <0x0414>; - ti,index-power-of-two; - }; - - clkout2_ck: clkout2_ck { + clkout2_ck: clkout2_ck@700 { #clock-cells = <0>; compatible = "ti,gate-clock"; clocks = <&clkout2_div_ck>; @@ -638,9 +538,88 @@ }; }; -&prcm_clockdomains { - clk_24mhz_clkdm: clk_24mhz_clkdm { - compatible = "ti,clockdomain"; - clocks = <&clkdiv32k_ick>; +&prcm { + l4_per_cm: l4_per_cm@0 { + compatible = "ti,omap4-cm"; + reg = <0x0 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x200>; + + l4_per_clkctrl: clk@14 { + compatible = "ti,clkctrl"; + reg = <0x14 0x13c>; + #clock-cells = <2>; + }; + }; + + l4_wkup_cm: l4_wkup_cm@400 { + compatible = "ti,omap4-cm"; + reg = <0x400 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x400 0x100>; + + l4_wkup_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0xd4>; + #clock-cells = <2>; + }; + }; + + mpu_cm: mpu_cm@600 { + compatible = "ti,omap4-cm"; + reg = <0x600 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x600 0x100>; + + mpu_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0x4>; + #clock-cells = <2>; + }; + }; + + l4_rtc_cm: l4_rtc_cm@800 { + compatible = "ti,omap4-cm"; + reg = <0x800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x800 0x100>; + + l4_rtc_clkctrl: clk@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0x4>; + #clock-cells = <2>; + }; + }; + + gfx_l3_cm: gfx_l3_cm@900 { + compatible = "ti,omap4-cm"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x900 0x100>; + + gfx_l3_clkctrl: clk@4 { + compatible = "ti,clkctrl"; + reg = <0x4 0x4>; + #clock-cells = <2>; + }; + }; + + l4_cefuse_cm: l4_cefuse_cm@a00 { + compatible = "ti,omap4-cm"; + reg = <0xa00 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xa00 0x100>; + + l4_cefuse_clkctrl: clk@20 { + compatible = "ti,clkctrl"; + reg = <0x20 0x4>; + #clock-cells = <2>; + }; }; }; diff --git a/arch/arm/dts/am33xx.dtsi b/arch/arm/dts/am33xx.dtsi index 42345375e68..d3dd6a16e70 100644 --- a/arch/arm/dts/am33xx.dtsi +++ b/arch/arm/dts/am33xx.dtsi @@ -10,12 +10,14 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/am33xx.h> - -#include "skeleton.dtsi" +#include <dt-bindings/clock/am3.h> / { compatible = "ti,am33xx"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; aliases { i2c0 = &i2c0; @@ -27,14 +29,16 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; - d_can0 = &dcan0; - d_can1 = &dcan1; + d-can0 = &dcan0; + d-can1 = &dcan1; usb0 = &usb0; usb1 = &usb1; phy0 = &usb0_phy; phy1 = &usb1_phy; ethernet0 = &cpsw_emac0; ethernet1 = &cpsw_emac1; + spi0 = &spi0; + spi1 = &spi1; }; cpus { @@ -45,19 +49,7 @@ device_type = "cpu"; reg = <0>; - /* - * To consider voltage drop between PMIC and SoC, - * tolerance value is reduced to 2% from 4% and - * voltage value is increased as a precaution. - */ - operating-points = < - /* kHz uV */ - 720000 1285000 - 600000 1225000 - 500000 1125000 - 275000 1125000 - >; - voltage-tolerance = <2>; /* 2 percentage */ + operating-points-v2 = <&cpu0_opp_table>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -66,9 +58,84 @@ }; }; - pmu { + cpu0_opp_table: opp-table { + compatible = "operating-points-v2-ti-cpu"; + syscon = <&scm_conf>; + + /* + * The three following nodes are marked with opp-suspend + * because the can not be enabled simultaneously on a + * single SoC. + */ + opp50-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100-275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; + + pmu@4b000000 { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; + reg = <0x4b000000 0x1000000>; + ti,hwmods = "debugss"; }; /* @@ -80,6 +147,8 @@ mpu { compatible = "ti,omap3-mpu"; ti,hwmods = "mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; }; }; @@ -91,7 +160,6 @@ * the whole bus hierarchy. */ ocp { - u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -104,9 +172,21 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x280000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@200000 { - compatible = "ti,am3-prcm"; + compatible = "ti,am3-prcm", "simple-bus"; reg = <0x200000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x200000 0x4000>; prcm_clocks: clocks { #address-cells = <1>; @@ -122,6 +202,7 @@ reg = <0x210000 0x2000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x210000 0x2000>; am33xx_pinmux: pinmux@800 { @@ -129,15 +210,17 @@ reg = <0x800 0x238>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; }; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x800>; #address-cells = <1>; #size-cells = <1>; + ranges = <0 0 0x800>; scm_clocks: clocks { #address-cells = <1>; @@ -145,6 +228,22 @@ }; }; + wkup_m3_ipc: wkup_m3_ipc@1324 { + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&mailbox &mbox_wkupm3>; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + scm_clockdomains: clockdomains { }; }; @@ -158,12 +257,44 @@ }; edma: edma@49000000 { - compatible = "ti,edma3"; - ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; - reg = <0x49000000 0x10000>, - <0x44e10f90 0x40>; + compatible = "ti,edma3-tpcc"; + ti,hwmods = "tpcc"; + reg = <0x49000000 0x10000>; + reg-names = "edma3_cc"; interrupts = <12 13 14>; - #dma-cells = <1>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + + edma_tptc0: tptc@49800000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc0"; + reg = <0x49800000 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc1: tptc@49900000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc1"; + reg = <0x49900000 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + + edma_tptc2: tptc@49a00000 { + compatible = "ti,edma3-tptc"; + ti,hwmods = "tptc2"; + reg = <0x49a00000 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; }; gpio0: gpio@44e07000 { @@ -211,67 +342,61 @@ }; uart0: serial@44e09000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; reg = <0x44e09000 0x2000>; - reg-shift = <2>; interrupts = <72>; status = "disabled"; - dmas = <&edma 26>, <&edma 27>; + dmas = <&edma 26 0>, <&edma 27 0>; dma-names = "tx", "rx"; }; uart1: serial@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; reg = <0x48022000 0x2000>; - reg-shift = <2>; interrupts = <73>; status = "disabled"; - dmas = <&edma 28>, <&edma 29>; + dmas = <&edma 28 0>, <&edma 29 0>; dma-names = "tx", "rx"; }; uart2: serial@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; reg = <0x48024000 0x2000>; - reg-shift = <2>; interrupts = <74>; status = "disabled"; - dmas = <&edma 30>, <&edma 31>; + dmas = <&edma 30 0>, <&edma 31 0>; dma-names = "tx", "rx"; }; uart3: serial@481a6000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; reg = <0x481a6000 0x2000>; - reg-shift = <2>; interrupts = <44>; status = "disabled"; }; uart4: serial@481a8000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; reg = <0x481a8000 0x2000>; - reg-shift = <2>; interrupts = <45>; status = "disabled"; }; uart5: serial@481aa000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; reg = <0x481aa000 0x2000>; - reg-shift = <2>; interrupts = <46>; status = "disabled"; }; @@ -312,8 +437,8 @@ ti,dual-volt; ti,needs-special-reset; ti,needs-special-hs-handling; - dmas = <&edma 24 - &edma 25>; + dmas = <&edma_xbar 24 0 0 + &edma_xbar 25 0 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x48060000 0x1000>; @@ -324,8 +449,8 @@ compatible = "ti,omap4-hsmmc"; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&edma 2 - &edma 3>; + dmas = <&edma 2 0 + &edma 3 0>; dma-names = "tx", "rx"; interrupts = <28>; reg = <0x481d8000 0x1000>; @@ -377,7 +502,7 @@ status = "disabled"; }; - mailbox: mailbox@480C8000 { + mailbox: mailbox@480c8000 { compatible = "ti,omap4-mailbox"; reg = <0x480C8000 0x200>; interrupts = <77>; @@ -386,6 +511,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; @@ -397,6 +523,8 @@ interrupts = <67>; ti,hwmods = "timer1"; ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; }; timer2: timer@48040000 { @@ -404,6 +532,8 @@ reg = <0x48040000 0x400>; interrupts = <68>; ti,hwmods = "timer2"; + clocks = <&timer2_fck>; + clock-names = "fck"; }; timer3: timer@48042000 { @@ -451,6 +581,8 @@ interrupts = <75 76>; ti,hwmods = "rtc"; + clocks = <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>; + clock-names = "int-clk"; }; spi0: spi@48030000 { @@ -461,10 +593,10 @@ interrupts = <65>; ti,spi-num-cs = <2>; ti,hwmods = "spi0"; - dmas = <&edma 16 - &edma 17 - &edma 18 - &edma 19>; + dmas = <&edma 16 0 + &edma 17 0 + &edma 18 0 + &edma 19 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -477,10 +609,10 @@ interrupts = <125>; ti,spi-num-cs = <2>; ti,hwmods = "spi1"; - dmas = <&edma 42 - &edma 43 - &edma 44 - &edma 45>; + dmas = <&edma 42 0 + &edma 43 0 + &edma 44 0 + &edma 45 0>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -508,6 +640,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb0: usb@47401000 { @@ -556,6 +689,7 @@ reg-names = "phy"; status = "disabled"; ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; }; usb1: usb@47401800 { @@ -625,20 +759,24 @@ 0x48300200 0x48300200 0x80>; /* EHRPWM */ ecap0: ecap@48300100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <31>; interrupt-names = "ecap0"; - ti,hwmods = "ecap0"; status = "disabled"; }; - ehrpwm0: ehrpwm@48300200 { - compatible = "ti,am33xx-ehrpwm"; + ehrpwm0: pwm@48300200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; - ti,hwmods = "ehrpwm0"; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -655,20 +793,24 @@ 0x48302200 0x48302200 0x80>; /* EHRPWM */ ecap1: ecap@48302100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <47>; interrupt-names = "ecap1"; - ti,hwmods = "ecap1"; status = "disabled"; }; - ehrpwm1: ehrpwm@48302200 { - compatible = "ti,am33xx-ehrpwm"; + ehrpwm1: pwm@48302200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; - ti,hwmods = "ehrpwm1"; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -685,34 +827,36 @@ 0x48304200 0x48304200 0x80>; /* EHRPWM */ ecap2: ecap@48304100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <61>; interrupt-names = "ecap2"; - ti,hwmods = "ecap2"; status = "disabled"; }; - ehrpwm2: ehrpwm@48304200 { - compatible = "ti,am33xx-ehrpwm"; + ehrpwm2: pwm@48304200 { + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; - ti,hwmods = "ehrpwm2"; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; mac: ethernet@4a100000 { - compatible = "ti,cpsw"; + compatible = "ti,am335x-cpsw","ti,cpsw"; ti,hwmods = "cpgmac0"; clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; clock-names = "fck", "cpts"; cpdma_channels = <8>; ale_entries = <1024>; bd_ram_size = <0x2000>; - no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -734,7 +878,7 @@ status = "disabled"; davinci_mdio: mdio@4a101000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; @@ -763,14 +907,21 @@ ocmcram: ocmcram@40300000 { compatible = "mmio-sram"; reg = <0x40300000 0x10000>; /* 64k */ - }; + ranges = <0x0 0x40300000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; - wkup_m3: wkup_m3@44d00000 { - compatible = "ti,am3353-wkup-m3"; - reg = <0x44d00000 0x4000 /* M3 UMEM */ - 0x44d80000 0x2000>; /* M3 DMEM */ - ti,hwmods = "wkup_m3"; - ti,no-reset-on-init; + pm_sram_code: pm-sram-code@0 { + compatible = "ti,sram"; + reg = <0x0 0x1000>; + protect-exec; + }; + + pm_sram_data: pm-sram-data@1000 { + compatible = "ti,sram"; + reg = <0x1000 0x1000>; + pool; + }; }; elm: elm@48080000 { @@ -795,6 +946,8 @@ interrupts = <16>; ti,hwmods = "adc_tsc"; status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; tsc { compatible = "ti,am3359-tsc"; @@ -805,16 +958,32 @@ }; }; + emif: emif@4c000000 { + compatible = "ti,emif-am3352"; + reg = <0x4c000000 0x1000000>; + ti,hwmods = "emif"; + interrupts = <101>; + sram = <&pm_sram_code + &pm_sram_data>; + ti,no-idle; + }; + gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; ti,no-idle-on-init; reg = <0x50000000 0x2000>; interrupts = <100>; + dmas = <&edma 52 0>; + dma-names = "rxtx"; gpmc,num-cs = <7>; gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; status = "disabled"; }; @@ -823,7 +992,7 @@ ti,hwmods = "sham"; reg = <0x53100000 0x200>; interrupts = <109>; - dmas = <&edma 36>; + dmas = <&edma 36 0>; dma-names = "rx"; }; @@ -832,8 +1001,8 @@ ti,hwmods = "aes"; reg = <0x53500000 0xa0>; interrupts = <103>; - dmas = <&edma 6>, - <&edma 5>; + dmas = <&edma 6 0>, + <&edma 5 0>; dma-names = "tx", "rx"; }; @@ -846,12 +1015,12 @@ interrupts = <80>, <81>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 8>, - <&edma 9>; + dmas = <&edma 8 2>, + <&edma 9 2>; dma-names = "tx", "rx"; }; - mcasp1: mcasp@4803C000 { + mcasp1: mcasp@4803c000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp1"; reg = <0x4803C000 0x2000>, @@ -860,8 +1029,8 @@ interrupts = <82>, <83>; interrupt-names = "tx", "rx"; status = "disabled"; - dmas = <&edma 10>, - <&edma 11>; + dmas = <&edma 10 2>, + <&edma 11 2>; dma-names = "tx", "rx"; }; @@ -874,4 +1043,4 @@ }; }; -/include/ "am33xx-clocks.dtsi" +#include "am33xx-clocks.dtsi" diff --git a/arch/arm/dts/am3517-evm-ui.dtsi b/arch/arm/dts/am3517-evm-ui.dtsi new file mode 100644 index 00000000000..e841918c1c2 --- /dev/null +++ b/arch/arm/dts/am3517-evm-ui.dtsi @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + codec1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23_1>; + system-clock-frequency = <12000000>; + }; + }; + + codec2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master2>; + simple-audio-card,frame-master = <&sound_master2>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master2: simple-audio-card,codec { + sound-dai = <&tlv320aic23_2>; + system-clock-frequency = <12000000>; + }; + }; + + expander-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + record { + label = "Record"; + /* linux,code = <BTN_0>; */ + gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; + }; + + play { + label = "Play"; + linux,code = <KEY_PLAY>; + gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; + }; + + Stop { + label = "Stop"; + linux,code = <KEY_STOP>; + gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; + }; + + fwd { + label = "FWD"; + linux,code = <KEY_FASTFORWARD>; + gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; + }; + + rwd { + label = "RWD"; + linux,code = <KEY_REWIND>; + gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; + }; + + shift { + label = "Shift"; + linux,code = <KEY_LEFTSHIFT>; + gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; + }; + + Mode { + label = "Mode"; + linux,code = <BTN_MODE>; + gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; + }; + + Menu { + label = "Menu"; + linux,code = <KEY_MENU>; + gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; + }; + + Up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; + }; + + Down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c2 { + /* Audio codecs */ + tlv320aic23_1: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + tlv320aic23_2: codec@1b { + compatible = "ti,tlv320aic23"; + reg = <0x1b>; + #sound-dai-cells= <0>; + status = "okay"; + }; +}; + +&i2c3 { + /* Audio codecs */ + tlv320aic23_3: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + /* GPIO Expanders */ + tca6416_2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + tca6416_3: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + /* TVP5146 Analog Video decoder input */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&mcbsp1 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&omap3_pmx_core { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; +}; diff --git a/arch/arm/dts/am3517-evm.dts b/arch/arm/dts/am3517-evm.dts index 1d158cfda15..1e2bb68231a 100644 --- a/arch/arm/dts/am3517-evm.dts +++ b/arch/arm/dts/am3517-evm.dts @@ -9,6 +9,7 @@ #include "am3517.dtsi" #include "am3517-som.dtsi" +#include "am3517-evm-ui.dtsi" #include <dt-bindings/input/input.h> / { @@ -227,7 +228,7 @@ vmmc-supply = <&vmmc_fixed>; bus-width = <4>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ + cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ }; &mmc3 { diff --git a/arch/arm/dts/am3517-som.dtsi b/arch/arm/dts/am3517-som.dtsi index dae6e458e59..b1c988eed87 100644 --- a/arch/arm/dts/am3517-som.dtsi +++ b/arch/arm/dts/am3517-som.dtsi @@ -163,7 +163,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/dts/am4372.dtsi b/arch/arm/dts/am4372.dtsi index 3ffa8e016e0..6f60a32999a 100644 --- a/arch/arm/dts/am4372.dtsi +++ b/arch/arm/dts/am4372.dtsi @@ -108,8 +108,6 @@ compatible = "ti,am437-padconf", "pinctrl-single"; reg = <0x800 0x31c>; - #address-cells = <1>; - #size-cells = <0>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; @@ -119,8 +117,6 @@ scm_conf: scm_conf@0 { compatible = "syscon"; reg = <0x0 0x800>; - #address-cells = <1>; - #size-cells = <1>; scm_clocks: clocks { #address-cells = <1>; @@ -764,7 +760,8 @@ reg = <0x48038000 0x2000>, <0x46000000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <80>, <81>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 8>, @@ -778,7 +775,8 @@ reg = <0x4803C000 0x2000>, <0x46400000 0x400000>; reg-names = "mpu", "dat"; - interrupts = <82>, <83>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "tx", "rx"; status = "disabled"; dmas = <&edma 10>, @@ -807,6 +805,8 @@ gpmc,num-waitpins = <2>; #address-cells = <2>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; status = "disabled"; }; diff --git a/arch/arm/dts/am437x-idk-evm.dts b/arch/arm/dts/am437x-idk-evm.dts index e4546471654..28e3e1ba32a 100644 --- a/arch/arm/dts/am437x-idk-evm.dts +++ b/arch/arm/dts/am437x-idk-evm.dts @@ -106,8 +106,6 @@ compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_pins_default>; - #address-cells = <1>; - #size-cells = <0>; switch@0 { label = "power-button"; diff --git a/arch/arm/dts/armada-388-helios4-u-boot.dtsi b/arch/arm/dts/armada-388-helios4-u-boot.dtsi new file mode 100644 index 00000000000..4b20610d831 --- /dev/null +++ b/arch/arm/dts/armada-388-helios4-u-boot.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0+ + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + spi1 = &spi1; + }; +}; + +ð0 { + phy-reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; +}; + +&spi1 { + u-boot,dm-spl; +}; + +&w25q32 { + status = "okay"; + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi index 9869d729d34..d78d34d2135 100644 --- a/arch/arm/dts/bcm6858.dtsi +++ b/arch/arm/dts/bcm6858.dtsi @@ -75,7 +75,7 @@ u-boot,dm-pre-reloc; uart0: serial@ff800640 { - compatible = "brcm,bcm6858-uart"; + compatible = "brcm,bcm6345-uart"; reg = <0x0 0xff800640 0x0 0x18>; clocks = <&periph_osc>; diff --git a/arch/arm/dts/da850-evm.dts b/arch/arm/dts/da850-evm.dts index 0e82bb988fd..a3c9b346721 100644 --- a/arch/arm/dts/da850-evm.dts +++ b/arch/arm/dts/da850-evm.dts @@ -27,6 +27,65 @@ spi0 = &spi1; }; + backlight: backlight-pwm { + pinctrl-names = "default"; + pinctrl-0 = <&ecap2_pins>; + power-supply = <&backlight_lcd>; + compatible = "pwm-backlight"; + /* + * The PWM here corresponds to production hardware. The + * schematic needs to be 1015171 (15 March 2010), Rev A + * or newer. + */ + pwms = <&ecap2 0 50000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <7>; + }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, change the status below to 'disabled' then + * then change the status of the vpif below to 'okay' + */ + status = "okay"; + enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */ + + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <16>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <4>; + vsync-len = <11>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + vbat: fixedregulator0 { compatible = "regulator-fixed"; regulator-name = "vbat"; @@ -35,6 +94,15 @@ regulator-boot-on; }; + backlight_lcd: backlight-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_backlight_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */ + enable-active-high; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "DA850/OMAP-L138 EVM"; @@ -63,6 +131,14 @@ }; }; +&ecap2 { + status = "okay"; +}; + +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -93,6 +169,10 @@ }; }; +&sata { + status = "okay"; +}; + &serial0 { status = "okay"; }; @@ -109,6 +189,10 @@ status = "okay"; }; +&lcdc { + status = "okay"; +}; + &i2c0 { status = "okay"; clock-frequency = <100000>; @@ -137,6 +221,12 @@ gpio-controller; #gpio-cells = <2>; }; + tca6416_bb: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; }; &wdt { @@ -336,5 +426,10 @@ &vpif { pinctrl-names = "default"; pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>; - status = "okay"; + /* + * The vpif and the LCD are mutually exclusive. + * To enable VPIF, disable the ti,tilcdc,panel then + * change the status below to 'okay' + */ + status = "disabled"; }; diff --git a/arch/arm/dts/da850-lcdk.dts b/arch/arm/dts/da850-lcdk.dts index a1f4d6d5a56..0177e3ed20f 100644 --- a/arch/arm/dts/da850-lcdk.dts +++ b/arch/arm/dts/da850-lcdk.dts @@ -21,8 +21,8 @@ stdout-path = "serial2:115200n8"; }; - memory { - device_type = "memory"; + memory@c0000000 { + /* 128 MB DDR2 SDRAM @ 0xc0000000 */ reg = <0xc0000000 0x08000000>; }; @@ -123,6 +123,10 @@ }; }; +&ref_clk { + clock-frequency = <24000000>; +}; + &pmx_core { status = "okay"; @@ -175,6 +179,11 @@ status = "okay"; }; +&sata_refclk { + status = "okay"; + clock-frequency = <100000000>; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/dts/da850.dtsi b/arch/arm/dts/da850.dtsi index c66cf789536..47aa53ba6b9 100644 --- a/arch/arm/dts/da850.dtsi +++ b/arch/arm/dts/da850.dtsi @@ -7,10 +7,19 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x0>; + }; + arm { #address-cells = <1>; #size-cells = <1>; @@ -23,6 +32,25 @@ reg = <0xfffee000 0x2000>; }; }; + clocks: clocks { + ref_clk: ref_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ref_clk"; + }; + sata_refclk: sata_refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sata_refclk"; + status = "disabled"; + }; + usb_refclkin: usb_refclkin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "usb_refclkin"; + status = "disabled"; + }; + }; dsp: dsp@11800000 { compatible = "ti,da850-dsp"; reg = <0x11800000 0x40000>, @@ -33,6 +61,8 @@ reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig"; interrupt-parent = <&intc>; interrupts = <28>; + clocks = <&psc0 15>; + resets = <&psc0 15>; status = "disabled"; }; soc@1c00000 { @@ -43,17 +73,57 @@ ranges = <0x0 0x01c00000 0x400000>; interrupt-parent = <&intc>; + psc0: clock-controller@10000 { + compatible = "ti,da850-psc0"; + reg = <0x10000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>, + <&pll0_sysclk 4>, <&pll0_sysclk 6>, + <&async1_clk>; + clock-names = "pll0_sysclk1", "pll0_sysclk2", + "pll0_sysclk4", "pll0_sysclk6", + "async1"; + }; + pll0: clock-controller@11000 { + compatible = "ti,da850-pll0"; + reg = <0x11000 0x1000>; + clocks = <&ref_clk>, <&pll1_sysclk 3>; + clock-names = "clksrc", "extclksrc"; + + pll0_pllout: pllout { + #clock-cells = <0>; + }; + pll0_sysclk: sysclk { + #clock-cells = <1>; + }; + pll0_auxclk: auxclk { + #clock-cells = <0>; + }; + pll0_obsclk: obsclk { + #clock-cells = <0>; + }; + }; pmx_core: pinmux@14120 { compatible = "pinctrl-single"; reg = <0x14120 0x50>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 17 0x8>, + <&range 17 8 0x4>, + <&range 26 8 0x4>, + <&range 34 80 0x8>, + <&range 129 31 0x8>; status = "disabled"; + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + serial0_rtscts_pins: pinmux_serial0_rtscts_pins { pinctrl-single,bits = < /* UART0_RTS UART0_CTS */ @@ -264,8 +334,41 @@ usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; #phy-cells = <1>; + clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>; + clock-names = "usb0_clk48", "usb1_clk48"; status = "disabled"; }; + usb_phy_clk: usb-phy-clocks { + compatible = "ti,da830-usb-phy-clocks"; + #clock-cells = <1>; + clocks = <&psc1 1>, <&usb_refclkin>, + <&pll0_auxclk>; + clock-names = "fck", "usb_refclkin", "auxclk"; + }; + ehrpwm_tbclk: ehrpwm_tbclk { + compatible = "ti,da830-tbclksync"; + #clock-cells = <0>; + clocks = <&psc1 17>; + clock-names = "fck"; + }; + div4p5_clk: div4.5 { + compatible = "ti,da830-div4p5ena"; + #clock-cells = <0>; + clocks = <&pll0_pllout>; + clock-names = "pll0_pllout"; + }; + async1_clk: async1 { + compatible = "ti,da850-async1-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 3>, <&div4p5_clk>; + clock-names = "pll0_sysclk3", "div4.5"; + }; + async3_clk: async3 { + compatible = "ti,da850-async3-clksrc"; + #clock-cells = <0>; + clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>; + clock-names = "pll0_sysclk2", "pll1_sysclk2"; + }; }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; @@ -277,18 +380,21 @@ #dma-cells = <2>; ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>; + power-domains = <&psc0 0>; }; edma0_tptc0: tptc@8000 { compatible = "ti,edma3-tptc"; reg = <0x8000 0x400>; interrupts = <13>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 1>; }; edma0_tptc1: tptc@8400 { compatible = "ti,edma3-tptc"; reg = <0x8400 0x400>; interrupts = <32>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc0 2>; }; edma1: edma@230000 { compatible = "ti,edma3-tpcc"; @@ -300,12 +406,14 @@ #dma-cells = <2>; ti,tptcs = <&edma1_tptc0 7>; + power-domains = <&psc1 0>; }; edma1_tptc0: tptc@238000 { compatible = "ti,edma3-tptc"; reg = <0x238000 0x400>; interrupts = <95>; interrupt-names = "edm3_tcerrint"; + power-domains = <&psc1 21>; }; serial0: serial@42000 { compatible = "ti,da830-uart", "ns16550a"; @@ -313,6 +421,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <25>; + clocks = <&psc0 9>; + power-domains = <&psc0 9>; status = "disabled"; }; serial1: serial@10c000 { @@ -321,6 +431,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <53>; + clocks = <&psc1 12>; + power-domains = <&psc1 12>; status = "disabled"; }; serial2: serial@10d000 { @@ -329,6 +441,8 @@ reg-io-width = <4>; reg-shift = <2>; interrupts = <61>; + clocks = <&psc1 13>; + power-domains = <&psc1 13>; status = "disabled"; }; rtc0: rtc@23000 { @@ -336,6 +450,8 @@ reg = <0x23000 0x1000>; interrupts = <19 19>; + clocks = <&pll0_auxclk>; + clock-names = "int-clk"; status = "disabled"; }; i2c0: i2c@22000 { @@ -344,6 +460,7 @@ interrupts = <15>; #address-cells = <1>; #size-cells = <0>; + clocks = <&pll0_auxclk>; status = "disabled"; }; i2c1: i2c@228000 { @@ -352,11 +469,21 @@ interrupts = <51>; #address-cells = <1>; #size-cells = <0>; + clocks = <&psc1 11>; + power-domains = <&psc1 11>; status = "disabled"; }; + clocksource: timer@20000 { + compatible = "ti,da830-timer"; + reg = <0x20000 0x1000>; + interrupts = <12>, <13>; + interrupt-names = "tint12", "tint34"; + clocks = <&pll0_auxclk>; + }; wdt: wdt@21000 { compatible = "ti,davinci-wdt"; reg = <0x21000 0x1000>; + clocks = <&pll0_auxclk>; status = "disabled"; }; mmc0: mmc@40000 { @@ -367,12 +494,14 @@ interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; + clocks = <&psc0 5>; status = "disabled"; }; vpif: video@217000 { compatible = "ti,da850-vpif"; reg = <0x217000 0x1000>; interrupts = <92>; + power-domains = <&psc1 9>; status = "disabled"; /* VPIF capture port */ @@ -395,6 +524,7 @@ interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; + clocks = <&psc1 18>; status = "disabled"; }; ehrpwm0: pwm@300000 { @@ -402,6 +532,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x300000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ehrpwm1: pwm@302000 { @@ -409,6 +542,9 @@ "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x302000 0x2000>; + clocks = <&psc1 17>, <&ehrpwm_tbclk>; + clock-names = "fck", "tbclk"; + power-domains = <&psc1 17>; status = "disabled"; }; ecap0: ecap@306000 { @@ -416,6 +552,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x306000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap1: ecap@307000 { @@ -423,6 +562,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x307000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; ecap2: ecap@308000 { @@ -430,6 +572,9 @@ "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x308000 0x80>; + clocks = <&psc1 20>; + clock-names = "fck"; + power-domains = <&psc1 20>; status = "disabled"; }; spi0: spi@41000 { @@ -442,6 +587,8 @@ interrupts = <20>; dmas = <&edma0 14 0>, <&edma0 15 0>; dma-names = "rx", "tx"; + clocks = <&psc0 4>; + power-domains = <&psc0 4>; status = "disabled"; }; spi1: spi@30e000 { @@ -454,6 +601,8 @@ interrupts = <56>; dmas = <&edma0 18 0>, <&edma0 19 0>; dma-names = "rx", "tx"; + clocks = <&psc1 10>; + power-domains = <&psc1 10>; status = "disabled"; }; usb0: usb@200000 { @@ -465,6 +614,8 @@ dr_mode = "otg"; phys = <&usb_phy 0>; phy-names = "usb-phy"; + clocks = <&psc1 1>; + clock-ranges; status = "disabled"; #address-cells = <1>; @@ -488,6 +639,7 @@ interrupts = <58>; #dma-cells = <2>; #dma-channels = <4>; + power-domains = <&psc1 1>; status = "okay"; }; }; @@ -495,13 +647,31 @@ compatible = "ti,da850-ahci"; reg = <0x218000 0x2000>, <0x22c018 0x4>; interrupts = <67>; + clocks = <&psc1 8>, <&sata_refclk>; + clock-names = "fck", "refclk"; status = "disabled"; }; + pll1: clock-controller@21a000 { + compatible = "ti,da850-pll1"; + reg = <0x21a000 0x1000>; + clocks = <&ref_clk>; + clock-names = "clksrc"; + + pll1_sysclk: sysclk { + #clock-cells = <1>; + }; + pll1_obsclk: obsclk { + #clock-cells = <0>; + }; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; reg = <0x224000 0x1000>; + clocks = <&psc1 5>; + clock-names = "fck"; + power-domains = <&psc1 5>; status = "disabled"; }; eth0: ethernet@220000 { @@ -517,6 +687,8 @@ 35 36 >; + clocks = <&psc1 5>; + power-domains = <&psc1 5>; status = "disabled"; }; usb1: usb@225000 { @@ -525,6 +697,7 @@ interrupts = <59>; phys = <&usb_phy 1>; phy-names = "usb-phy"; + clocks = <&psc1 2>; status = "disabled"; }; gpio: gpio@226000 { @@ -532,16 +705,169 @@ gpio-controller; #gpio-cells = <2>; reg = <0x226000 0x1000>; - interrupts = <42 IRQ_TYPE_EDGE_BOTH - 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH - 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH - 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH - 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + interrupts = <42 43 44 45 46 47 48 49 50>; ti,ngpio = <144>; ti,davinci-gpio-unbanked = <0>; + clocks = <&psc1 3>; + clock-names = "gpio"; status = "disabled"; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&pmx_core 0 15 1>, + <&pmx_core 1 14 1>, + <&pmx_core 2 13 1>, + <&pmx_core 3 12 1>, + <&pmx_core 4 11 1>, + <&pmx_core 5 10 1>, + <&pmx_core 6 9 1>, + <&pmx_core 7 8 1>, + <&pmx_core 8 7 1>, + <&pmx_core 9 6 1>, + <&pmx_core 10 5 1>, + <&pmx_core 11 4 1>, + <&pmx_core 12 3 1>, + <&pmx_core 13 2 1>, + <&pmx_core 14 1 1>, + <&pmx_core 15 0 1>, + <&pmx_core 16 39 1>, + <&pmx_core 17 38 1>, + <&pmx_core 18 37 1>, + <&pmx_core 19 36 1>, + <&pmx_core 20 35 1>, + <&pmx_core 21 34 1>, + <&pmx_core 22 33 1>, + <&pmx_core 23 32 1>, + <&pmx_core 24 24 1>, + <&pmx_core 25 22 1>, + <&pmx_core 26 21 1>, + <&pmx_core 27 20 1>, + <&pmx_core 28 19 1>, + <&pmx_core 29 18 1>, + <&pmx_core 30 17 1>, + <&pmx_core 31 16 1>, + <&pmx_core 32 55 1>, + <&pmx_core 33 54 1>, + <&pmx_core 34 53 1>, + <&pmx_core 35 52 1>, + <&pmx_core 36 51 1>, + <&pmx_core 37 50 1>, + <&pmx_core 38 49 1>, + <&pmx_core 39 48 1>, + <&pmx_core 40 47 1>, + <&pmx_core 41 46 1>, + <&pmx_core 42 45 1>, + <&pmx_core 43 44 1>, + <&pmx_core 44 43 1>, + <&pmx_core 45 42 1>, + <&pmx_core 46 41 1>, + <&pmx_core 47 40 1>, + <&pmx_core 48 71 1>, + <&pmx_core 49 70 1>, + <&pmx_core 50 69 1>, + <&pmx_core 51 68 1>, + <&pmx_core 52 67 1>, + <&pmx_core 53 66 1>, + <&pmx_core 54 65 1>, + <&pmx_core 55 64 1>, + <&pmx_core 56 63 1>, + <&pmx_core 57 62 1>, + <&pmx_core 58 61 1>, + <&pmx_core 59 60 1>, + <&pmx_core 60 59 1>, + <&pmx_core 61 58 1>, + <&pmx_core 62 57 1>, + <&pmx_core 63 56 1>, + <&pmx_core 64 87 1>, + <&pmx_core 65 86 1>, + <&pmx_core 66 85 1>, + <&pmx_core 67 84 1>, + <&pmx_core 68 83 1>, + <&pmx_core 69 82 1>, + <&pmx_core 70 81 1>, + <&pmx_core 71 80 1>, + <&pmx_core 72 70 1>, + <&pmx_core 73 78 1>, + <&pmx_core 74 77 1>, + <&pmx_core 75 76 1>, + <&pmx_core 76 75 1>, + <&pmx_core 77 74 1>, + <&pmx_core 78 73 1>, + <&pmx_core 79 72 1>, + <&pmx_core 80 103 1>, + <&pmx_core 81 102 1>, + <&pmx_core 82 101 1>, + <&pmx_core 83 100 1>, + <&pmx_core 84 99 1>, + <&pmx_core 85 98 1>, + <&pmx_core 86 97 1>, + <&pmx_core 87 96 1>, + <&pmx_core 88 95 1>, + <&pmx_core 89 94 1>, + <&pmx_core 90 93 1>, + <&pmx_core 91 92 1>, + <&pmx_core 92 91 1>, + <&pmx_core 93 90 1>, + <&pmx_core 94 89 1>, + <&pmx_core 95 88 1>, + <&pmx_core 96 158 1>, + <&pmx_core 97 157 1>, + <&pmx_core 98 156 1>, + <&pmx_core 99 155 1>, + <&pmx_core 100 154 1>, + <&pmx_core 101 129 1>, + <&pmx_core 102 113 1>, + <&pmx_core 103 112 1>, + <&pmx_core 104 111 1>, + <&pmx_core 105 110 1>, + <&pmx_core 106 109 1>, + <&pmx_core 107 108 1>, + <&pmx_core 108 107 1>, + <&pmx_core 109 106 1>, + <&pmx_core 110 105 1>, + <&pmx_core 111 104 1>, + <&pmx_core 112 145 1>, + <&pmx_core 113 144 1>, + <&pmx_core 114 143 1>, + <&pmx_core 115 142 1>, + <&pmx_core 116 141 1>, + <&pmx_core 117 140 1>, + <&pmx_core 118 139 1>, + <&pmx_core 119 138 1>, + <&pmx_core 120 137 1>, + <&pmx_core 121 136 1>, + <&pmx_core 122 135 1>, + <&pmx_core 123 134 1>, + <&pmx_core 124 133 1>, + <&pmx_core 125 132 1>, + <&pmx_core 126 131 1>, + <&pmx_core 127 130 1>, + <&pmx_core 128 159 1>, + <&pmx_core 129 31 1>, + <&pmx_core 130 30 1>, + <&pmx_core 131 20 1>, + <&pmx_core 132 28 1>, + <&pmx_core 133 27 1>, + <&pmx_core 134 26 1>, + <&pmx_core 135 23 1>, + <&pmx_core 136 153 1>, + <&pmx_core 137 152 1>, + <&pmx_core 138 151 1>, + <&pmx_core 139 150 1>, + <&pmx_core 140 149 1>, + <&pmx_core 141 148 1>, + <&pmx_core 142 147 1>, + <&pmx_core 143 146 1>; + }; + psc1: clock-controller@227000 { + compatible = "ti,da850-psc1"; + reg = <0x227000 0x1000>; + #clock-cells = <1>; + #power-domain-cells = <1>; + clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>, + <&async3_clk>; + clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3"; + assigned-clocks = <&async3_clk>; + assigned-clock-parents = <&pll1_sysclk 2>; }; pinconf: pin-controller@22c00c { compatible = "ti,da850-pupd"; @@ -556,6 +882,7 @@ reg-names = "mpu", "dat"; interrupts = <54>; interrupt-names = "common"; + power-domains = <&psc1 7>; status = "disabled"; dmas = <&edma0 1 1>, <&edma0 0 1>; @@ -567,6 +894,9 @@ reg = <0x213000 0x1000>; interrupts = <52>; max-pixelclock = <37500>; + clocks = <&psc1 16>; + clock-names = "fck"; + power-domains = <&psc1 16>; status = "disabled"; }; }; @@ -578,6 +908,9 @@ reg = <0x68000000 0x00008000>; ranges = <0 0 0x60000000 0x08000000 1 0 0x68000000 0x00008000>; + clocks = <&psc0 3>; + clock-names = "aemif"; + clock-ranges; status = "disabled"; }; memctrl: memory-controller@b0000000 { diff --git a/arch/arm/dts/dm816x.dtsi b/arch/arm/dts/dm816x.dtsi index 276211e1ee5..fe58faf2f78 100644 --- a/arch/arm/dts/dm816x.dtsi +++ b/arch/arm/dts/dm816x.dtsi @@ -90,8 +90,6 @@ dm816x_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x50a>; - #address-cells = <1>; - #size-cells = <0>; #pinctrl-cells = <1>; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xf>; @@ -127,8 +125,6 @@ }; scrm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; }; scrm_clockdomains: clockdomains { diff --git a/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts index 4cd72b5e612..32d0dc371fc 100644 --- a/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts +++ b/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts @@ -15,18 +15,3 @@ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3"; }; - -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; diff --git a/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts index 2aca9111c69..24283739526 100644 --- a/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts +++ b/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts @@ -15,18 +15,3 @@ model = "LogicPD Zoom DM3730 SOM-LV Development Kit"; compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3"; }; - -&omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb2_2_pins>; - hsusb2_2_pins: pinmux_hsusb2_2_pins { - pinctrl-single,pins = < - OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ - OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ - OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ - OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ - OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ - OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ - >; - }; -}; diff --git a/arch/arm/dts/logicpd-som-lv.dtsi b/arch/arm/dts/logicpd-som-lv.dtsi index 03485509c82..98b682a8080 100644 --- a/arch/arm/dts/logicpd-som-lv.dtsi +++ b/arch/arm/dts/logicpd-som-lv.dtsi @@ -129,7 +129,7 @@ }; &mmc3 { - interrupts-extended = <&intc 94>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; @@ -232,20 +232,6 @@ >; }; - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - >; - }; - - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - >; - }; - tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ @@ -267,6 +253,33 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; +}; + +&omap3_pmx_core2 { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb2_2_pins>; + hsusb2_2_pins: pinmux_hsusb2_2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ + OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ + OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ + OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ + OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ + OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ + >; + }; }; &uart2 { diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts index 9d5d53fbe9c..c39cf2ca54d 100644 --- a/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/dts/logicpd-torpedo-37xx-devkit.dts @@ -35,7 +35,7 @@ * jumpering combinations for the long run. */ &mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>; diff --git a/arch/arm/dts/omap5-u-boot.dtsi b/arch/arm/dts/omap5-u-boot.dtsi index bf2684cb610..a6a7801a4b2 100644 --- a/arch/arm/dts/omap5-u-boot.dtsi +++ b/arch/arm/dts/omap5-u-boot.dtsi @@ -15,6 +15,10 @@ ocp { u-boot,dm-spl; + ocp2scp@4a080000 { + compatible = "ti,omap-ocp2scp", "simple-bus"; + }; + ocp2scp@4a090000 { compatible = "ti,omap-ocp2scp", "simple-bus"; }; diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts index f8b77011671..7a9b742d364 100644 --- a/arch/arm/dts/stm32mp157c-ed1.dts +++ b/arch/arm/dts/stm32mp157c-ed1.dts @@ -365,6 +365,14 @@ usb33d-supply = <&usb33>; }; +&hwspinlock { + status = "okay"; +}; + +&pinctrl { + hwlocks = <&hwspinlock 0>; +}; + &usbphyc_port0 { phy-supply = <&vdd_usb>; vdda1v1-supply = <®11>; diff --git a/arch/arm/dts/stm32mp157c.dtsi b/arch/arm/dts/stm32mp157c.dtsi index 33c5981869b..37cadfa30c9 100644 --- a/arch/arm/dts/stm32mp157c.dtsi +++ b/arch/arm/dts/stm32mp157c.dtsi @@ -690,6 +690,15 @@ status = "disabled"; }; + hwspinlock: hwspinlock@4c000000 { + compatible = "st,stm32-hwspinlock"; + #hwlock-cells = <1>; + reg = <0x4c000000 0x400>; + clocks = <&rcc HSEM>; + clock-names = "hwspinlock"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; diff --git a/arch/arm/include/asm/arch-stm32/gpio.h b/arch/arm/include/asm/arch-stm32/gpio.h index 84859b14479..570e80a6ba8 100644 --- a/arch/arm/include/asm/arch-stm32/gpio.h +++ b/arch/arm/include/asm/arch-stm32/gpio.h @@ -7,6 +7,8 @@ #ifndef _GPIO_H_ #define _GPIO_H_ +#define STM32_GPIOS_PER_BANK 16 + enum stm32_gpio_port { STM32_GPIO_PORT_A = 0, STM32_GPIO_PORT_B, @@ -109,6 +111,9 @@ struct stm32_gpio_regs { struct stm32_gpio_priv { struct stm32_gpio_regs *regs; + unsigned int gpio_range; }; +int stm32_offset_to_index(struct udevice *dev, unsigned int offset); + #endif /* _GPIO_H_ */ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 5df74728de1..12bc7fbe06e 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -160,7 +160,12 @@ static inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define in_be32(a) in_arch(l,be32,a) #define in_be16(a) in_arch(w,be16,a) +#define out_32(a,v) __raw_writel(v,a) +#define out_16(a,v) __raw_writew(v,a) #define out_8(a,v) __raw_writeb(v,a) + +#define in_32(a) __raw_readl(a) +#define in_16(a) __raw_readw(a) #define in_8(a) __raw_readb(a) #define clrbits(type, addr, clear) \ @@ -180,6 +185,10 @@ static inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define setbits_le32(addr, set) setbits(le32, addr, set) #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) +#define clrbits_32(addr, clear) clrbits(32, addr, clear) +#define setbits_32(addr, set) setbits(32, addr, set) +#define clrsetbits_32(addr, clear, set) clrsetbits(32, addr, clear, set) + #define clrbits_be16(addr, clear) clrbits(be16, addr, clear) #define setbits_be16(addr, set) setbits(be16, addr, set) #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) @@ -188,6 +197,10 @@ static inline void __raw_readsl(unsigned long addr, void *data, int longlen) #define setbits_le16(addr, set) setbits(le16, addr, set) #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) +#define clrbits_16(addr, clear) clrbits(16, addr, clear) +#define setbits_16(addr, set) setbits(16, addr, set) +#define clrsetbits_16(addr, clear, set) clrsetbits(16, addr, clear, set) + #define clrbits_8(addr, clear) clrbits(8, addr, clear) #define setbits_8(addr, set) setbits(8, addr, set) #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) diff --git a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds index eca78f8104a..b714e93b3b2 100644 --- a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +++ b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds @@ -48,3 +48,13 @@ SECTIONS __bss_end = .; } >.sdram } + +#if defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__image_copy_end - __start < (CONFIG_SPL_MAX_SIZE), \ + "SPL image too big"); +#endif + +#if defined(CONFIG_SPL_BSS_MAX_SIZE) +ASSERT(__bss_end - __bss_start < (CONFIG_SPL_BSS_MAX_SIZE), \ + "SPL image BSS too big"); +#endif diff --git a/arch/arm/mach-stm32mp/include/mach/gpio.h b/arch/arm/mach-stm32mp/include/mach/gpio.h index 5151150b8d8..5ca76d21ff1 100644 --- a/arch/arm/mach-stm32mp/include/mach/gpio.h +++ b/arch/arm/mach-stm32mp/include/mach/gpio.h @@ -8,6 +8,8 @@ #define _STM32_GPIO_H_ #include <asm/gpio.h> +#define STM32_GPIOS_PER_BANK 16 + enum stm32_gpio_port { STM32_GPIO_PORT_A = 0, STM32_GPIO_PORT_B, @@ -110,5 +112,9 @@ struct stm32_gpio_regs { struct stm32_gpio_priv { struct stm32_gpio_regs *regs; + unsigned int gpio_range; }; + +int stm32_offset_to_index(struct udevice *dev, unsigned int offset); + #endif /* _STM32_GPIO_H_ */ diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c index 5d91d7e2c12..dea42de833f 100644 --- a/arch/arm/mach-sunxi/pmic_bus.c +++ b/arch/arm/mach-sunxi/pmic_bus.c @@ -101,6 +101,9 @@ int pmic_bus_setbits(u8 reg, u8 bits) if (ret) return ret; + if ((val & bits) == bits) + return 0; + val |= bits; return pmic_bus_write(reg, val); } @@ -114,6 +117,9 @@ int pmic_bus_clrbits(u8 reg, u8 bits) if (ret) return ret; + if (!(val & bits)) + return 0; + val &= ~bits; return pmic_bus_write(reg, val); } diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 6722e18bc39..6b1c2692baa 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -460,6 +460,8 @@ test4 { compatible = "denx,u-boot-probe-test"; + first-syscon = <&syscon0>; + second-sys-ctrl = <&another_system_controller>; }; }; @@ -540,12 +542,12 @@ }; }; - syscon@0 { + syscon0: syscon@0 { compatible = "sandbox,syscon0"; reg = <0x10 16>; }; - syscon@1 { + another_system_controller: syscon@1 { compatible = "sandbox,syscon1"; reg = <0x20 5 0x28 6 @@ -742,6 +744,18 @@ pinctrl { compatible = "sandbox,pinctrl"; }; + + hwspinlock@0 { + compatible = "sandbox,hwspinlock"; + }; + + dma: dma { + compatible = "sandbox,dma"; + #dma-cells = <1>; + + dmas = <&dma 0>, <&dma 1>, <&dma 2>; + dma-names = "m2m", "tx0", "rx0"; + }; }; #include "sandbox_pmic.dtsi" diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h index 5a144851025..c724827f6cf 100644 --- a/arch/sandbox/include/asm/state.h +++ b/arch/sandbox/include/asm/state.h @@ -101,6 +101,7 @@ struct sandbox_state { ulong next_tag; /* Next address tag to allocate */ struct list_head mapmem_head; /* struct sandbox_mapmem_entry */ + bool hwspinlock; /* Hardware Spinlock status */ }; /* Minimum space we guarantee in the state FDT when calling read/write*/ diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a1c18d26e1d..e0520937751 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -729,13 +729,22 @@ config PCIE_ECAM_SIZE maximum number of PCI buses as defined by the PCI specification. config I8259_PIC - bool + bool "Enable Intel 8259 compatible interrupt controller" default y help Intel 8259 ISA compatible chipset incorporates two 8259 (master and slave) interrupt controllers. Include this to have U-Boot set up the interrupt correctly. +config APIC + bool "Enable Intel Advanced Programmable Interrupt Controller" + default y + help + The (A)dvanced (P)rogrammable (I)nterrupt (C)ontroller is responsible + for catching interrupts and distributing them to one or more CPU + cores. In most cases there are some LAPICs (local) for each core and + one I/O APIC. This conjunction is found on most modern x86 systems. + config PINCTRL_ICH6 bool help diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index f862d8c071e..54668aab240 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/ obj-$(CONFIG_INTEL_QUARK) += quark/ obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/ obj-$(CONFIG_INTEL_TANGIER) += tangier/ -obj-y += lapic.o ioapic.o +obj-$(CONFIG_APIC) += lapic.o ioapic.o obj-y += irq.o ifndef CONFIG_$(SPL_)X86_64 obj-$(CONFIG_SMP) += mp_init.o diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index aaf0d071924..4c6ed0bfb28 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -77,7 +77,8 @@ int last_stage_init(void) timestamp_add_to_bootstage(); /* start usb so that usb keyboard can be used as input device */ - usb_init(); + if (CONFIG_IS_ENABLED(USB_KEYBOARD)) + usb_init(); board_final_cleanup(); diff --git a/arch/x86/cpu/efi/payload.c b/arch/x86/cpu/efi/payload.c index c323c7b19a5..225aef7bf6a 100644 --- a/arch/x86/cpu/efi/payload.c +++ b/arch/x86/cpu/efi/payload.c @@ -166,7 +166,8 @@ int reserve_arch(void) int last_stage_init(void) { /* start usb so that usb keyboard can be used as input device */ - usb_init(); + if (CONFIG_IS_ENABLED(USB_KEYBOARD)) + usb_init(); return 0; } diff --git a/arch/x86/cpu/i386/interrupt.c b/arch/x86/cpu/i386/interrupt.c index ed8423e0799..1ea415b876d 100644 --- a/arch/x86/cpu/i386/interrupt.c +++ b/arch/x86/cpu/i386/interrupt.c @@ -264,7 +264,9 @@ int interrupt_init(void) i8259_init(); #endif +#ifdef CONFIG_APIC lapic_setup(); +#endif /* Initialize core interrupt and exception functionality of CPU */ cpu_init_interrupts(); diff --git a/arch/x86/include/asm/arch-tangier/acpi/platform.asl b/arch/x86/include/asm/arch-tangier/acpi/platform.asl index 7abea4bb96e..353b879918a 100644 --- a/arch/x86/include/asm/arch-tangier/acpi/platform.asl +++ b/arch/x86/include/asm/arch-tangier/acpi/platform.asl @@ -21,6 +21,19 @@ Method(_WAK, 1) Return (Package() {0, 0}) } +Scope (_SB) +{ + /* Real Time Clock */ + Device (RTC0) + { + Name (_HID, EisaId ("PNP0B00")) + Name (_CRS, ResourceTemplate() + { + IO(Decode16, 0x70, 0x70, 0x01, 0x08) + }) + } +} + /* ACPI global NVS */ #include "global_nvs.asl" diff --git a/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl b/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl index 48193ba9570..e166e510cb7 100644 --- a/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl +++ b/arch/x86/include/asm/arch-tangier/acpi/southcluster.asl @@ -295,16 +295,16 @@ Device (PCI0) Method (_CRS, 0, Serialized) { - Name (RBUF, ResourceTemplate () + Name (RBUF, ResourceTemplate() { - UartSerialBus (0x0001C200, DataBitsEight, StopBitsOne, + UartSerialBus(0x0001C200, DataBitsEight, StopBitsOne, 0xFC, LittleEndian, ParityTypeNone, FlowControlHardware, 0x20, 0x20, "\\_SB.PCI0.HSU0", 0, ResourceConsumer, , ) - GpioInt (Level, ActiveHigh, Exclusive, PullNone, 0, + GpioInt(Level, ActiveHigh, Exclusive, PullNone, 0, "\\_SB.PCI0.GPIO", 0, ResourceConsumer, , ) { 185 } - GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, + GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer, , ) { 184 } - GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, + GpioIo(Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.PCI0.GPIO", 0, ResourceConsumer, , ) { 71 } }) Return (RBUF) @@ -328,7 +328,7 @@ Device (FLIS) Name (_DDN, "Intel Merrifield Family-Level Interface Shim") Name (RBUF, ResourceTemplate() { - Memory32Fixed(ReadWrite, 0xFF0C0000, 0x00008000, ) + Memory32Fixed(ReadWrite, 0xFF0C0000, 0x00008000) PinGroup("spi5", ResourceProducer, ) { 90, 91, 92, 93, 94, 95, 96 } PinGroup("uart0", ResourceProducer, ) { 115, 116, 117, 118 } PinGroup("uart1", ResourceProducer, ) { 119, 120, 121, 122 } diff --git a/arch/x86/lib/interrupts.c b/arch/x86/lib/interrupts.c index 297067df710..39f8deaed13 100644 --- a/arch/x86/lib/interrupts.c +++ b/arch/x86/lib/interrupts.c @@ -64,7 +64,8 @@ void irq_install_handler(int irq, interrupt_handler_t *handler, void *arg) irq_handlers[irq].arg = arg; irq_handlers[irq].count = 0; - unmask_irq(irq); + if (CONFIG_IS_ENABLED(I8259_PIC)) + unmask_irq(irq); if (status) enable_interrupts(); @@ -83,7 +84,8 @@ void irq_free_handler(int irq) status = disable_interrupts(); - mask_irq(irq); + if (CONFIG_IS_ENABLED(I8259_PIC)) + mask_irq(irq); irq_handlers[irq].handler = NULL; irq_handlers[irq].arg = NULL; @@ -104,14 +106,16 @@ void do_irq(int hw_irq) } if (irq_handlers[irq].handler) { - mask_irq(irq); + if (CONFIG_IS_ENABLED(I8259_PIC)) + mask_irq(irq); irq_handlers[irq].handler(irq_handlers[irq].arg); irq_handlers[irq].count++; - unmask_irq(irq); - specific_eoi(irq); - + if (CONFIG_IS_ENABLED(I8259_PIC)) { + unmask_irq(irq); + specific_eoi(irq); + } } else { if ((irq & 7) != 7) { spurious_irq_cnt++; diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c index e05928f3222..dcbd4835b39 100644 --- a/board/8dtech/eco5pk/eco5pk.c +++ b/board/8dtech/eco5pk/eco5pk.c @@ -16,7 +16,7 @@ #include <asm/arch/emac_defs.h> #include <asm/gpio.h> #include <i2c.h> -#include <crc.h> +#include <u-boot/crc.h> #include <asm/mach-types.h> #include "eco5pk.h" diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index 160d30cd795..1f7650cb361 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -212,7 +212,7 @@ static struct mv_ddr_topology_map board_topology_map_1g = { SPEED_BIN_DDR_1600K, /* speed_bin */ MV_DDR_DEV_WIDTH_16BIT, /* memory_width */ MV_DDR_DIE_CAP_4GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_NORMAL, /* temperature */ MV_DDR_TIM_2T} }, /* timing */ @@ -234,7 +234,7 @@ static struct mv_ddr_topology_map board_topology_map_2g = { SPEED_BIN_DDR_1600K, /* speed_bin */ MV_DDR_DEV_WIDTH_16BIT, /* memory_width */ MV_DDR_DIE_CAP_8GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_NORMAL, /* temperature */ MV_DDR_TIM_2T} }, /* timing */ diff --git a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c index 92d7ae77f07..bc18fe6ddf4 100644 --- a/board/Marvell/db-88f6820-amc/db-88f6820-amc.c +++ b/board/Marvell/db-88f6820-amc/db-88f6820-amc.c @@ -67,7 +67,7 @@ static struct mv_ddr_topology_map board_topology_map = { SPEED_BIN_DDR_1866L, /* speed_bin */ MV_DDR_DEV_WIDTH_8BIT, /* memory_width */ MV_DDR_DIE_CAP_2GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_LOW, /* temperature */ MV_DDR_TIM_DEFAULT} }, /* timing */ diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c index a8cfe8af0a8..9368bce26ce 100644 --- a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c +++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c @@ -88,7 +88,7 @@ static struct mv_ddr_topology_map board_topology_map = { SPEED_BIN_DDR_1866L, /* speed_bin */ MV_DDR_DEV_WIDTH_8BIT, /* memory_width */ MV_DDR_DIE_CAP_4GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_LOW, /* temperature */ MV_DDR_TIM_DEFAULT} }, /* timing */ diff --git a/board/armadeus/apf27/apf27.c b/board/armadeus/apf27/apf27.c index 0f0c8a4a97d..bf2586d326a 100644 --- a/board/armadeus/apf27/apf27.c +++ b/board/armadeus/apf27/apf27.c @@ -16,8 +16,8 @@ #include <asm/arch/gpio.h> #include <asm/gpio.h> #include <linux/errno.h> +#include <u-boot/crc.h> #include "apf27.h" -#include "crc.h" #include "fpga.h" DECLARE_GLOBAL_DATA_PTR; diff --git a/board/gdsys/a38x/controlcenterdc.c b/board/gdsys/a38x/controlcenterdc.c index dd4c083fbd3..86051aedf8e 100644 --- a/board/gdsys/a38x/controlcenterdc.c +++ b/board/gdsys/a38x/controlcenterdc.c @@ -64,7 +64,7 @@ static struct mv_ddr_topology_map ddr_topology_map = { SPEED_BIN_DDR_1600K, /* speed_bin */ MV_DDR_DEV_WIDTH_16BIT, /* memory_width */ MV_DDR_DIE_CAP_4GBIT, /* mem_size */ - DDR_FREQ_533, /* frequency */ + MV_DDR_FREQ_533, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_LOW, /* temperature */ MV_DDR_TIM_DEFAULT} }, /* timing */ diff --git a/board/kobol/helios4/helios4.c b/board/kobol/helios4/helios4.c index 341678319a4..8c0864bcdd4 100644 --- a/board/kobol/helios4/helios4.c +++ b/board/kobol/helios4/helios4.c @@ -33,18 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #define BOARD_GPP_POL_LOW 0x0 #define BOARD_GPP_POL_MID 0x0 -/* IO expander on Marvell GP board includes e.g. fan enabling */ -struct marvell_io_exp { - u8 addr; - u8 val; -}; - -static struct marvell_io_exp io_exp[] = { - {6, 0xf9}, - {2, 0x46}, /* Assert reset signals and enable USB3 current limiter */ - {6, 0xb9} -}; - static struct serdes_map board_serdes_map[] = { {SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0}, {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, @@ -78,7 +66,7 @@ static struct mv_ddr_topology_map board_topology_map = { SPEED_BIN_DDR_1600K, /* speed_bin */ MV_DDR_DEV_WIDTH_16BIT, /* memory_width */ MV_DDR_DIE_CAP_8GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_LOW, /* temperature */ MV_DDR_TIM_DEFAULT} }, /* timing */ @@ -123,29 +111,9 @@ int board_early_init_f(void) int board_init(void) { - int i; - /* Address of boot parameters */ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; - /* Init I2C IO expanders */ - for (i = 0; i < ARRAY_SIZE(io_exp); i++) { - struct udevice *dev; - int ret; - - ret = i2c_get_chip_for_busnum(0, io_exp[i].addr, 1, &dev); - if (ret) { - printf("Cannot find I2C: %d\n", ret); - return 0; - } - - ret = dm_i2c_write(dev, io_exp[i].val, &io_exp[i].val, 1); - if (ret) { - printf("Failed to set IO expander via I2C\n"); - return -EIO; - } - } - return 0; } diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c index 4e1386c8a22..1742aa8921c 100644 --- a/board/solidrun/clearfog/clearfog.c +++ b/board/solidrun/clearfog/clearfog.c @@ -65,7 +65,7 @@ static struct mv_ddr_topology_map board_topology_map = { SPEED_BIN_DDR_1600K, /* speed_bin */ MV_DDR_DEV_WIDTH_16BIT, /* memory_width */ MV_DDR_DIE_CAP_4GBIT, /* mem_size */ - DDR_FREQ_800, /* frequency */ + MV_DDR_FREQ_800, /* frequency */ 0, 0, /* cas_wl cas_l */ MV_DDR_TEMP_LOW, /* temperature */ MV_DDR_TIM_DEFAULT} }, /* timing */ diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64 index bba2e01b60c..258921af22d 100644 --- a/board/sunxi/README.sunxi64 +++ b/board/sunxi/README.sunxi64 @@ -12,8 +12,13 @@ file describes how to make full use of the 64-bit capabilities. Quick Start / Overview ====================== - Build the ARM Trusted Firmware binary (see "ARM Trusted Firmware (ATF)" below) + $ cd /src/arm-trusted-firmware + $ make PLAT=sun50i_a64 DEBUG=1 bl31 - Build U-Boot (see "SPL/U-Boot" below) + $ export BL31=/path/to/bl31.bin + $ make pine64_plus_defconfig && make -j5 - Transfer to an uSD card (see "microSD card" below) + $ dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1 - Boot and enjoy! Building the firmware @@ -29,14 +34,18 @@ to build it first. ARM Trusted Firmware (ATF) ---------------------------- -Checkout the "allwinner" branch from the github repository [1] and build it: +Checkout the latest master branch from the official ATF repository [1] and +build it: $ export CROSS_COMPILE=aarch64-linux-gnu- -$ make PLAT=sun50iw1p1 DEBUG=1 bl31 -The resulting binary is build/sun50iw1p1/debug/bl31.bin. Either put the +$ make PLAT=sun50i_a64 DEBUG=1 bl31 +The resulting binary is build/sun50i_a64/debug/bl31.bin. Either put the location of this file into the BL31 environment variable or copy this to the root of your U-Boot build directory (or create a symbolic link). -$ export BL31=/src/arm-trusted-firmware/build/sun50iw1p1/debug/bl31.bin +$ export BL31=/src/arm-trusted-firmware/build/sun50i_a64/debug/bl31.bin (adjust the actual path accordingly) +The platform target "sun50i_a64" covers all boards with either an Allwinner +A64 or H5 SoC (since they are very similar). For boards with an Allwinner H6 +SoC use "sun50i_h6". If you run into size issues with the resulting U-Boot image file, it might help to use a release build, by using "DEBUG=0" when building bl31.bin. @@ -59,7 +68,8 @@ $ make pine64_plus_defconfig $ make This will build the SPL in spl/sunxi-spl.bin and a FIT image called u-boot.itb, -which contains the rest of the firmware. +which contains the rest of the firmware. u-boot-sunxi-with-spl.bin joins those +two components in one convenient image file. Boot process @@ -91,6 +101,9 @@ by using the USB-OTG interface and a host port on another computer. As the FEL mode is controlled by the boot ROM, it expects to be running in AArch32. For now the AArch64 SPL cannot properly return into FEL mode, so the feature is disabled in the configuration at the moment. +The repository in [3] contains FEL capable SPL binaries, built using an +off-tree branch to generate 32-bit ARM code (along with instructions +how to re-create them). microSD card ------------ @@ -165,6 +178,6 @@ Then write this image to a microSD card, replacing /dev/sdx with the right device file (see above): $ dd if=firmware.img of=/dev/sdx bs=8k seek=1 -[1] https://github.com/apritzel/arm-trusted-firmware.git +[1] https://github.com/ARM-software/arm-trusted-firmware.git [2] git://github.com/linux-sunxi/sunxi-tools.git [3] https://github.com/apritzel/pine64/ diff --git a/board/sunxi/board.c b/board/sunxi/board.c index 64ccbc7245f..917f5b18f6b 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -28,7 +28,7 @@ #endif #include <asm/gpio.h> #include <asm/io.h> -#include <crc.h> +#include <u-boot/crc.h> #include <environment.h> #include <linux/libfdt.h> #include <nand.h> @@ -637,13 +637,6 @@ void sunxi_board_init(void) power_failed |= axp_set_sw(IS_ENABLED(CONFIG_AXP_SW_ON)); #endif #endif - printf("DRAM:"); - gd->ram_size = sunxi_dram_init(); - printf(" %d MiB\n", (int)(gd->ram_size >> 20)); - if (!gd->ram_size) - hang(); - - sunxi_spl_store_dram_size(gd->ram_size); /* * Only clock up the CPU to full speed if we are reasonably @@ -652,7 +645,16 @@ void sunxi_board_init(void) if (!power_failed) clock_set_pll1(CONFIG_SYS_CLK_FREQ); else - printf("Failed to set core voltage! Can't set CPU frequency\n"); + printf("Error setting up the power controller.\n" + "CPU frequency not set.\n"); + + printf("DRAM:"); + gd->ram_size = sunxi_dram_init(); + printf(" %d MiB\n", (int)(gd->ram_size >> 20)); + if (!gd->ram_size) + hang(); + + sunxi_spl_store_dram_size(gd->ram_size); } #endif @@ -663,7 +665,7 @@ int g_dnl_board_usb_cable_connected(void) struct phy phy; int ret; - ret = uclass_get_device(UCLASS_USB_DEV_GENERIC, 0, &dev); + ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, 0, &dev); if (ret) { pr_err("%s: Cannot find USB device\n", __func__); return ret; diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 177a3246c3d..8dfb2eea43f 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -675,6 +675,19 @@ out: return; } +#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL) +static int device_okay(const char *path) +{ + int node; + + node = fdt_path_offset(gd->fdt_blob, path); + if (node < 0) + return 0; + + return fdtdec_get_is_enabled(gd->fdt_blob, node); +} +#endif + int board_late_init(void) { setup_board_eeprom_env(); @@ -714,6 +727,12 @@ int board_late_init(void) board_ti_set_ethaddr(2); #endif +#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL) + if (device_okay("/ocp/omap_dwc3_1@48880000")) + enable_usb_clocks(0); + if (device_okay("/ocp/omap_dwc3_2@488c0000")) + enable_usb_clocks(1); +#endif return 0; } @@ -864,93 +883,6 @@ int spl_start_uboot(void) } #endif -#ifdef CONFIG_USB_DWC3 -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_HIGH, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif /* CONFIG_USB_DWC3 */ - -#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - printf("port %d can't be used as device\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - break; - case 1: - if (init == USB_INIT_DEVICE) { -#ifdef CONFIG_USB_DWC3 - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); -#endif - } else { - printf("port %d can't be used as host\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ -#ifdef CONFIG_USB_DWC3 - switch (index) { - case 0: - case 1: - if (init == USB_INIT_DEVICE) { - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - } - break; - default: - printf("Invalid Controller Index\n"); - } -#endif - disable_usb_clocks(index); - return 0; -} -#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ - #ifdef CONFIG_DRIVER_TI_CPSW /* Delay value to add to calibrated value */ diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index bbe54450aee..d69641e3a05 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -646,6 +646,19 @@ int dram_init_banksize(void) return 0; } +#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL) +static int device_okay(const char *path) +{ + int node; + + node = fdt_path_offset(gd->fdt_blob, path); + if (node < 0) + return 0; + + return fdtdec_get_is_enabled(gd->fdt_blob, node); +} +#endif + int board_late_init(void) { #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG @@ -685,6 +698,12 @@ int board_late_init(void) if (board_is_dra71x_evm()) palmas_i2c_write_u8(LP873X_I2C_SLAVE_ADDR, 0x9, 0x7); #endif +#if CONFIG_IS_ENABLED(DM_USB) && CONFIG_IS_ENABLED(OF_CONTROL) + if (device_okay("/ocp/omap_dwc3_1@48880000")) + enable_usb_clocks(0); + if (device_okay("/ocp/omap_dwc3_2@488c0000")) + enable_usb_clocks(1); +#endif return 0; } @@ -896,110 +915,6 @@ const struct mmc_platform_fixups *platform_fixups_mmc(uint32_t addr) } #endif -#ifdef CONFIG_USB_DWC3 -static struct dwc3_device usb_otg_ss1 = { - .maximum_speed = USB_SPEED_SUPER, - .base = DRA7_USB_OTG_SS1_BASE, - .tx_fifo_resize = false, - .index = 0, -}; - -static struct dwc3_omap_device usb_otg_ss1_glue = { - .base = (void *)DRA7_USB_OTG_SS1_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 0, -}; - -static struct ti_usb_phy_device usb_phy1_device = { - .pll_ctrl_base = (void *)DRA7_USB3_PHY1_PLL_CTRL, - .usb2_phy_power = (void *)DRA7_USB2_PHY1_POWER, - .usb3_phy_power = (void *)DRA7_USB3_PHY1_POWER, - .index = 0, -}; - -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_SUPER, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss1.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - ti_usb_phy_uboot_init(&usb_phy1_device); - dwc3_omap_uboot_init(&usb_otg_ss1_glue); - dwc3_uboot_init(&usb_otg_ss1); - break; - case 1: - if (init == USB_INIT_DEVICE) { - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - } else { - usb_otg_ss2.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - } - - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - switch (index) { - case 0: - case 1: - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - break; - default: - printf("Invalid Controller Index\n"); - } - disable_usb_clocks(index); - return 0; -} - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif - #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) int spl_start_uboot(void) { diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 72709c0e413..3e06800608a 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -59,6 +59,11 @@ int dram_init(void) return 0; } +struct image_header *spl_get_load_buffer(ssize_t offset, size_t size) +{ + return (struct image_header *)(CONFIG_SYS_TEXT_BASE); +} + int board_init(void) { gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/cmd/bootmenu.c b/cmd/bootmenu.c index 979ac4a638d..7f88c1ed632 100644 --- a/cmd/bootmenu.c +++ b/cmd/bootmenu.c @@ -351,6 +351,12 @@ static struct bootmenu_data *bootmenu_create(int delay) } menu->count = i; + + if ((menu->active >= menu->count)||(menu->active < 0)) { //ensure active menuitem is inside menu + printf("active menuitem (%d) is outside menu (0..%d)\n",menu->active,menu->count-1); + menu->active=0; + } + return menu; cleanup: diff --git a/cmd/fastboot.c b/cmd/fastboot.c index ae3a5f627f1..0be83b78ac1 100644 --- a/cmd/fastboot.c +++ b/cmd/fastboot.c @@ -51,7 +51,7 @@ static int do_fastboot_usb(int argc, char *const argv[], return CMD_RET_FAILURE; } - ret = board_usb_init(controller_index, USB_INIT_DEVICE); + ret = usb_gadget_initialize(controller_index); if (ret) { pr_err("USB init failed: %d\n", ret); return CMD_RET_FAILURE; @@ -82,7 +82,7 @@ static int do_fastboot_usb(int argc, char *const argv[], exit: g_dnl_unregister(); g_dnl_clear_detach(); - board_usb_cleanup(controller_index, USB_INIT_DEVICE); + usb_gadget_release(controller_index); return ret; #else diff --git a/cmd/rockusb.c b/cmd/rockusb.c index 8206643b272..e0c1480d6d4 100644 --- a/cmd/rockusb.c +++ b/cmd/rockusb.c @@ -33,7 +33,7 @@ static int do_rockusb(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) dev_index = simple_strtoul(devnum, NULL, 0); rockusb_dev_init(devtype, dev_index); - ret = board_usb_init(controller_index, USB_INIT_DEVICE); + ret = usb_gadget_initialize(controller_index); if (ret) { printf("USB init failed: %d\n", ret); return CMD_RET_FAILURE; @@ -62,7 +62,7 @@ static int do_rockusb(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) exit: g_dnl_unregister(); g_dnl_clear_detach(); - board_usb_cleanup(controller_index, USB_INIT_DEVICE); + usb_gadget_release(controller_index); return ret; } diff --git a/cmd/thordown.c b/cmd/thordown.c index 2615adad750..ce3660d1747 100644 --- a/cmd/thordown.c +++ b/cmd/thordown.c @@ -30,7 +30,7 @@ int do_thor_down(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) goto done; int controller_index = simple_strtoul(usb_controller, NULL, 0); - ret = board_usb_init(controller_index, USB_INIT_DEVICE); + ret = usb_gadget_initialize(controller_index); if (ret) { pr_err("USB init failed: %d\n", ret); ret = CMD_RET_FAILURE; @@ -55,7 +55,7 @@ int do_thor_down(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) exit: g_dnl_unregister(); - board_usb_cleanup(controller_index, USB_INIT_DEVICE); + usb_gadget_release(controller_index); done: dfu_free_entities(); diff --git a/cmd/usb_gadget_sdp.c b/cmd/usb_gadget_sdp.c index ba1f66a5de5..808ed974fa7 100644 --- a/cmd/usb_gadget_sdp.c +++ b/cmd/usb_gadget_sdp.c @@ -20,7 +20,7 @@ static int do_sdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *usb_controller = argv[1]; int controller_index = simple_strtoul(usb_controller, NULL, 0); - board_usb_init(controller_index, USB_INIT_DEVICE); + usb_gadget_initialize(controller_index); g_dnl_clear_detach(); g_dnl_register("usb_dnl_sdp"); @@ -37,7 +37,7 @@ static int do_sdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) exit: g_dnl_unregister(); - board_usb_cleanup(controller_index, USB_INIT_DEVICE); + usb_gadget_release(controller_index); return ret; } diff --git a/cmd/usb_mass_storage.c b/cmd/usb_mass_storage.c index 0d551141e0d..753ae4f42a7 100644 --- a/cmd/usb_mass_storage.c +++ b/cmd/usb_mass_storage.c @@ -160,7 +160,7 @@ static int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag, controller_index = (unsigned int)(simple_strtoul( usb_controller, NULL, 0)); - if (board_usb_init(controller_index, USB_INIT_DEVICE)) { + if (usb_gadget_initialize(controller_index)) { pr_err("Couldn't init USB controller.\n"); rc = CMD_RET_FAILURE; goto cleanup_ums_init; @@ -231,7 +231,7 @@ static int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag, cleanup_register: g_dnl_unregister(); cleanup_board: - board_usb_cleanup(controller_index, USB_INIT_DEVICE); + usb_gadget_release(controller_index); cleanup_ums_init: ums_fini(); diff --git a/common/dfu.c b/common/dfu.c index 2620d3238b1..44d1484d3d2 100644 --- a/common/dfu.c +++ b/common/dfu.c @@ -23,9 +23,9 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget) bool dfu_reset = false; int ret, i = 0; - ret = board_usb_init(usbctrl_index, USB_INIT_DEVICE); + ret = usb_gadget_initialize(usbctrl_index); if (ret) { - pr_err("board usb init failed\n"); + pr_err("usb_gadget_initialize failed\n"); return CMD_RET_FAILURE; } g_dnl_clear_detach(); @@ -84,7 +84,7 @@ int run_usb_dnl_gadget(int usbctrl_index, char *usb_dnl_gadget) } exit: g_dnl_unregister(); - board_usb_cleanup(usbctrl_index, USB_INIT_DEVICE); + usb_gadget_release(usbctrl_index); if (dfu_reset) do_reset(NULL, 0, 0, NULL); diff --git a/common/hash.c b/common/hash.c index ef146513a07..413a5bfcdae 100644 --- a/common/hash.c +++ b/common/hash.c @@ -85,6 +85,33 @@ static int hash_finish_sha256(struct hash_algo *algo, void *ctx, void } #endif +static int hash_init_crc16_ccitt(struct hash_algo *algo, void **ctxp) +{ + uint16_t *ctx = malloc(sizeof(uint16_t)); + *ctx = 0; + *ctxp = ctx; + return 0; +} + +static int hash_update_crc16_ccitt(struct hash_algo *algo, void *ctx, + const void *buf, unsigned int size, + int is_last) +{ + *((uint16_t *)ctx) = crc16_ccitt(*((uint16_t *)ctx), buf, size); + return 0; +} + +static int hash_finish_crc16_ccitt(struct hash_algo *algo, void *ctx, + void *dest_buf, int size) +{ + if (size < algo->digest_size) + return -1; + + *((uint16_t *)dest_buf) = *((uint16_t *)ctx); + free(ctx); + return 0; +} + static int hash_init_crc32(struct hash_algo *algo, void **ctxp) { uint32_t *ctx = malloc(sizeof(uint32_t)); @@ -160,6 +187,15 @@ static struct hash_algo hash_algo[] = { }, #endif { + .name = "crc16-ccitt", + .digest_size = 2, + .chunk_size = CHUNKSZ, + .hash_func_ws = crc16_ccitt_wd_buf, + .hash_init = hash_init_crc16_ccitt, + .hash_update = hash_update_crc16_ccitt, + .hash_finish = hash_finish_crc16_ccitt, + }, + { .name = "crc32", .digest_size = 4, .chunk_size = CHUNKSZ_CRC32, diff --git a/common/main.c b/common/main.c index 9802bed229c..07b34bf2b05 100644 --- a/common/main.c +++ b/common/main.c @@ -24,15 +24,15 @@ static void run_preboot_environment_command(void) p = env_get("preboot"); if (p != NULL) { -# ifdef CONFIG_AUTOBOOT_KEYED - int prev = disable_ctrlc(1); /* disable Control C checking */ -# endif + int prev = 0; + + if (IS_ENABLED(CONFIG_AUTOBOOT_KEYED)) + prev = disable_ctrlc(1); /* disable Ctrl-C checking */ run_command_list(p, -1, 0); -# ifdef CONFIG_AUTOBOOT_KEYED - disable_ctrlc(prev); /* restore Control C checking */ -# endif + if (IS_ENABLED(CONFIG_AUTOBOOT_KEYED)) + disable_ctrlc(prev); /* restore Ctrl-C checking */ } #endif /* CONFIG_PREBOOT */ } @@ -44,17 +44,15 @@ void main_loop(void) bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop"); -#ifdef CONFIG_VERSION_VARIABLE - env_set("ver", version_string); /* set version variable */ -#endif /* CONFIG_VERSION_VARIABLE */ + if (IS_ENABLED(CONFIG_VERSION_VARIABLE)) + env_set("ver", version_string); /* set version variable */ cli_init(); run_preboot_environment_command(); -#if defined(CONFIG_UPDATE_TFTP) - update_tftp(0UL, NULL, NULL); -#endif /* CONFIG_UPDATE_TFTP */ + if (IS_ENABLED(CONFIG_UPDATE_TFTP)) + update_tftp(0UL, NULL, NULL); s = bootdelay_process(); if (cli_process_fdt(&s)) diff --git a/common/xyzModem.c b/common/xyzModem.c index 830fca83875..e5c65b480a2 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -24,7 +24,7 @@ #include <common.h> #include <xyzModem.h> #include <stdarg.h> -#include <crc.h> +#include <u-boot/crc.h> /* Assumption - run xyzModem protocol over the console port */ diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig index 467ca4efabf..dee8d028eef 100644 --- a/configs/A20-OLinuXino-Lime2-eMMC_defconfig +++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig @@ -26,7 +26,9 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_AXP_ALDO3_INRUSH_QUIRK=y CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index fa58a6dac87..0c04ae6491a 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -25,7 +25,9 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_RGMII=y CONFIG_MII=y CONFIG_SUN7I_GMAC=y +CONFIG_AXP_ALDO3_INRUSH_QUIRK=y CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y CONFIG_AXP_ALDO4_VOLT=2800 CONFIG_SCSI=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index 379b9580a21..419b41c1ee7 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -19,7 +19,6 @@ CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_EXT_SUPPORT is not set CONFIG_SPL_MTD_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set -# CONFIG_SPL_YMODEM_SUPPORT is not set # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y # CONFIG_CMD_SETEXPR is not set diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index 065efca633e..3cb38aff6ec 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -18,6 +18,7 @@ CONFIG_SPL_I2C_SUPPORT=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_SPL_YMODEM_SUPPORT=y +CONFIG_SPL_POWER_SUPPORT=y CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " @@ -37,6 +38,10 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-pdu001" CONFIG_SPL_DM=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y +CONFIG_BLK=y +CONFIG_SPL_BLK=y +CONFIG_DM_MMC=y +CONFIG_SPL_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_SDHCI=y CONFIG_PINCTRL=y diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 5242ab6f9f6..32a95ea52b6 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -50,6 +50,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y +CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_SPI_FLASH=y @@ -61,6 +62,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DRIVER_TI_CPSW=y CONFIG_MII=y +CONFIG_PHY=y +CONFIG_PIPE3_PHY=y +CONFIG_OMAP_USB2_PHY=y CONFIG_DM_PMIC=y CONFIG_PMIC_PALMAS=y CONFIG_DM_REGULATOR=y @@ -70,13 +74,15 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_TI_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_SPL_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_OMAP_USB_PHY=y +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index be4aa0f316c..6a057380295 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -53,6 +53,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=1 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y +CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_OMAP_HS=y CONFIG_DM_SPI_FLASH=y @@ -64,6 +65,9 @@ CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_ETH=y CONFIG_DRIVER_TI_CPSW=y CONFIG_MII=y +CONFIG_PHY=y +CONFIG_PIPE3_PHY=y +CONFIG_OMAP_USB2_PHY=y CONFIG_DM_PMIC=y CONFIG_PMIC_PALMAS=y CONFIG_DM_REGULATOR=y @@ -73,13 +77,15 @@ CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_TI_QSPI=y CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_SPL_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_OMAP_USB_PHY=y +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/bcm968580_ram_defconfig b/configs/bcm968580_ram_defconfig index abe90ee75fb..4e10175a501 100644 --- a/configs/bcm968580_ram_defconfig +++ b/configs/bcm968580_ram_defconfig @@ -30,7 +30,7 @@ CONFIG_SPECIFY_CONSOLE_INDEX=y CONFIG_CONS_INDEX=0 CONFIG_DM_SERIAL=y CONFIG_SERIAL_SEARCH_ALL=y -CONFIG_BCM6858_SERIAL=y +CONFIG_BCM6345_SERIAL=y CONFIG_SYSRESET=y CONFIG_REGEX=y # CONFIG_GENERATE_SMBIOS_TABLE is not set diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 27f6b5d981f..1d9509c03c2 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -56,6 +56,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y +CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y @@ -72,6 +73,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_SPL_PHY=y CONFIG_PIPE3_PHY=y +CONFIG_OMAP_USB2_PHY=y CONFIG_PMIC_PALMAS=y CONFIG_PMIC_LP873X=y CONFIG_DM_REGULATOR_FIXED=y @@ -87,14 +89,14 @@ CONFIG_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPL_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_XHCI_DRA7XX_INDEX=1 CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_OMAP_USB_PHY=y +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 651fc4fb427..f3be339fb53 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -56,6 +56,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_DM_GPIO=y CONFIG_PCF8575_GPIO=y CONFIG_DM_I2C=y +CONFIG_MISC=y CONFIG_DM_MMC=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y @@ -71,6 +72,7 @@ CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_SPL_PHY=y CONFIG_PIPE3_PHY=y +CONFIG_OMAP_USB2_PHY=y CONFIG_PMIC_PALMAS=y CONFIG_PMIC_LP873X=y CONFIG_DM_REGULATOR_FIXED=y @@ -86,14 +88,14 @@ CONFIG_TIMER=y CONFIG_OMAP_TIMER=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_SPL_DM_USB=y +CONFIG_DM_USB_GADGET=y +CONFIG_SPL_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_XHCI_DRA7XX_INDEX=1 CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_DWC3_OMAP=y -CONFIG_USB_DWC3_PHY_OMAP=y -CONFIG_OMAP_USB_PHY=y +CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" diff --git a/configs/evb-rk3328_defconfig b/configs/evb-rk3328_defconfig index 5b3bb8eae7b..f0221633fa8 100644 --- a/configs/evb-rk3328_defconfig +++ b/configs/evb-rk3328_defconfig @@ -49,6 +49,7 @@ CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYSRESET=y CONFIG_USB=y +CONFIG_USB_DWC3=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig index e30eb3d41cc..3bb4622fbee 100644 --- a/configs/helios4_defconfig +++ b/configs/helios4_defconfig @@ -6,8 +6,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_HELIOS4=y CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y -CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 @@ -20,11 +20,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x141 -CONFIG_SPL_I2C_SUPPORT=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y -CONFIG_CMD_PCI=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y @@ -38,18 +37,22 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_SCSI_AHCI=y +CONFIG_DM_GPIO=y +CONFIG_MVEBU_GPIO=y +CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0x1 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_MV=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_WINBOND=y -CONFIG_SPI_FLASH_MTD=y CONFIG_PHY_GIGE=y CONFIG_MVNETA=y CONFIG_MII=y -CONFIG_PCI=y CONFIG_SCSI=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 1a767854984..5b65c6157a0 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -96,6 +96,8 @@ CONFIG_BOARD=y CONFIG_BOARD_SANDBOX=y CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y +CONFIG_DM_HWSPINLOCK=y +CONFIG_HWSPINLOCK_SANDBOX=y CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y @@ -216,3 +218,6 @@ CONFIG_UT_TIME=y CONFIG_UT_DM=y CONFIG_UT_ENV=y CONFIG_UT_OVERLAY=y +CONFIG_DMA=y +CONFIG_DMA_CHANNELS=y +CONFIG_SANDBOX_DMA=y diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig index 1bf3a7c11fd..121e9628089 100644 --- a/configs/stm32f746-disco_defconfig +++ b/configs/stm32f746-disco_defconfig @@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_STM32=y CONFIG_SYS_TEXT_BASE=0x08008000 -CONFIG_SYS_MALLOC_F_LEN=0xC00 +CONFIG_SYS_MALLOC_F_LEN=0xE00 CONFIG_STM32F7=y CONFIG_TARGET_STM32F746_DISCO=y CONFIG_ENV_VARS_UBOOT_CONFIG=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 3bf75380890..c8409fd04e6 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -32,6 +32,8 @@ CONFIG_CMD_EXT4_WRITE=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_STM32_ADC=y +CONFIG_DM_HWSPINLOCK=y +CONFIG_HWSPINLOCK_STM32=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_LED=y diff --git a/drivers/Kconfig b/drivers/Kconfig index 4ac823d962e..e9fbadd13d5 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -40,6 +40,8 @@ source "drivers/fpga/Kconfig" source "drivers/gpio/Kconfig" +source "drivers/hwspinlock/Kconfig" + source "drivers/i2c/Kconfig" source "drivers/input/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 55de10926ef..c425831b584 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -113,4 +113,5 @@ obj-$(CONFIG_W1) += w1/ obj-$(CONFIG_W1_EEPROM) += w1-eeprom/ obj-$(CONFIG_MACH_PIC32) += ddr/microchip/ +obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock/ endif diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c index 04b369aa5a1..6d7a5140065 100644 --- a/drivers/clk/clk-uclass.c +++ b/drivers/clk/clk-uclass.c @@ -243,6 +243,10 @@ int clk_set_defaults(struct udevice *dev) { int ret; + /* If this not in SPL and pre-reloc state, don't take any action. */ + if (!(IS_ENABLED(CONFIG_SPL_BUILD) || (gd->flags & GD_FLG_RELOC))) + return 0; + debug("%s(%s)\n", __func__, dev_read_name(dev)); ret = clk_set_default_parents(dev); diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index 6a8c7b754fa..b7c5d34fe06 100644 --- a/drivers/clk/clk_stm32mp1.c +++ b/drivers/clk/clk_stm32mp1.c @@ -104,6 +104,7 @@ #define RCC_MP_APB2ENSETR 0XA08 #define RCC_MP_APB3ENSETR 0xA10 #define RCC_MP_AHB2ENSETR 0xA18 +#define RCC_MP_AHB3ENSETR 0xA20 #define RCC_MP_AHB4ENSETR 0xA28 /* used for most of SELR register */ @@ -534,6 +535,8 @@ static const struct stm32mp1_clk_gate stm32mp1_clk_gate[] = { STM32MP1_CLK_SET_CLR(RCC_MP_AHB2ENSETR, 8, USBO_K, _USBO_SEL), STM32MP1_CLK_SET_CLR(RCC_MP_AHB2ENSETR, 16, SDMMC3_K, _SDMMC3_SEL), + STM32MP1_CLK_SET_CLR(RCC_MP_AHB3ENSETR, 11, HSEM, _UNKNOWN_SEL), + STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 0, GPIOA, _UNKNOWN_SEL), STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 1, GPIOB, _UNKNOWN_SEL), STM32MP1_CLK_SET_CLR(RCC_MP_AHB4ENSETR, 2, GPIOC, _UNKNOWN_SEL), diff --git a/drivers/core/syscon-uclass.c b/drivers/core/syscon-uclass.c index 303e166a69c..661cf61d62a 100644 --- a/drivers/core/syscon-uclass.c +++ b/drivers/core/syscon-uclass.c @@ -53,6 +53,29 @@ static int syscon_pre_probe(struct udevice *dev) #endif } +struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev, + const char *name) +{ + struct udevice *syscon; + struct regmap *r; + int err; + + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev, + name, &syscon); + if (err) { + dev_dbg(dev, "unable to find syscon device\n"); + return ERR_PTR(err); + } + + r = syscon_get_regmap(syscon); + if (!r) { + dev_dbg(dev, "unable to find regmap\n"); + return ERR_PTR(-ENODEV); + } + + return r; +} + int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp) { struct udevice *dev; diff --git a/drivers/ddr/marvell/a38x/ddr3_debug.c b/drivers/ddr/marvell/a38x/ddr3_debug.c index 1eac0bcd2b2..f5fc964d6f8 100644 --- a/drivers/ddr/marvell/a38x/ddr3_debug.c +++ b/drivers/ddr/marvell/a38x/ddr3_debug.c @@ -4,6 +4,8 @@ */ #include "ddr3_init.h" +#include "mv_ddr_training_db.h" +#include "mv_ddr_regs.h" u8 is_reg_dump = 0; u8 debug_pbs = DEBUG_LEVEL_ERROR; @@ -83,7 +85,7 @@ void ddr3_hws_set_log_level(enum ddr_lib_debug_block block, u8 level) #endif /* SILENT_LIB */ #if defined(DDR_VIEWER_TOOL) -static char *convert_freq(enum hws_ddr_freq freq); +static char *convert_freq(enum mv_ddr_freq freq); #if defined(EXCLUDE_SWITCH_DEBUG) u32 ctrl_sweepres[ADLL_LENGTH][MAX_INTERFACE_NUM][MAX_BUS_NUM]; u32 ctrl_adll[MAX_CS_NUM * MAX_INTERFACE_NUM * MAX_BUS_NUM]; @@ -177,23 +179,6 @@ int ddr3_tip_init_config_func(u32 dev_num, } /* - * Read training result table - */ -int hws_ddr3_tip_read_training_result( - u32 dev_num, enum hws_result result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]) -{ - if (result == NULL) - return MV_BAD_PARAM; - - memcpy(result, training_result, - sizeof(enum hws_result) * - MAX_STAGE_LIMIT * - MAX_INTERFACE_NUM); - - return MV_OK; -} - -/* * Get training result info pointer */ enum hws_result *ddr3_tip_get_result_ptr(u32 stage) @@ -218,50 +203,50 @@ int ddr3_tip_get_device_info(u32 dev_num, struct ddr3_device_info *info_ptr) /* * Convert freq to character string */ -static char *convert_freq(enum hws_ddr_freq freq) +static char *convert_freq(enum mv_ddr_freq freq) { switch (freq) { - case DDR_FREQ_LOW_FREQ: - return "DDR_FREQ_LOW_FREQ"; + case MV_DDR_FREQ_LOW_FREQ: + return "MV_DDR_FREQ_LOW_FREQ"; - case DDR_FREQ_400: + case MV_DDR_FREQ_400: return "400"; - case DDR_FREQ_533: + case MV_DDR_FREQ_533: return "533"; - case DDR_FREQ_667: + case MV_DDR_FREQ_667: return "667"; - case DDR_FREQ_800: + case MV_DDR_FREQ_800: return "800"; - case DDR_FREQ_933: + case MV_DDR_FREQ_933: return "933"; - case DDR_FREQ_1066: + case MV_DDR_FREQ_1066: return "1066"; - case DDR_FREQ_311: + case MV_DDR_FREQ_311: return "311"; - case DDR_FREQ_333: + case MV_DDR_FREQ_333: return "333"; - case DDR_FREQ_467: + case MV_DDR_FREQ_467: return "467"; - case DDR_FREQ_850: + case MV_DDR_FREQ_850: return "850"; - case DDR_FREQ_900: + case MV_DDR_FREQ_900: return "900"; - case DDR_FREQ_360: - return "DDR_FREQ_360"; + case MV_DDR_FREQ_360: + return "MV_DDR_FREQ_360"; - case DDR_FREQ_1000: - return "DDR_FREQ_1000"; + case MV_DDR_FREQ_1000: + return "MV_DDR_FREQ_1000"; default: return "Unknown Frequency"; @@ -364,7 +349,7 @@ int ddr3_tip_print_log(u32 dev_num, u32 mem_addr) if ((is_validate_window_per_if != 0) || (is_validate_window_per_pup != 0)) { u32 is_pup_log = 0; - enum hws_ddr_freq freq; + enum mv_ddr_freq freq; freq = tm->interface_params[first_active_if].memory_freq; @@ -528,7 +513,7 @@ int ddr3_tip_print_stability_log(u32 dev_num) u8 if_id = 0, csindex = 0, bus_id = 0, idx = 0; u32 reg_data; u32 read_data[MAX_INTERFACE_NUM]; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); /* Title print */ @@ -844,8 +829,6 @@ u32 xsb_test_table[][8] = { 0xffffffff, 0xffffffff} }; -static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr); - int ddr3_tip_print_adll(void) { u32 bus_cnt = 0, if_id, data_p1, data_p2, ui_data3, dev_num = 0; @@ -877,353 +860,6 @@ int ddr3_tip_print_adll(void) return MV_OK; } -/* - * Set attribute value - */ -int ddr3_tip_set_atr(u32 dev_num, u32 flag_id, u32 value) -{ - int ret; - u32 *ptr_flag = NULL; - - ret = ddr3_tip_access_atr(dev_num, flag_id, value, &ptr_flag); - if (ptr_flag != NULL) { - printf("ddr3_tip_set_atr Flag ID 0x%x value is set to 0x%x (was 0x%x)\n", - flag_id, value, *ptr_flag); - *ptr_flag = value; - } else { - printf("ddr3_tip_set_atr Flag ID 0x%x value is set to 0x%x\n", - flag_id, value); - } - - return ret; -} - -/* - * Access attribute - */ -static int ddr3_tip_access_atr(u32 dev_num, u32 flag_id, u32 value, u32 **ptr) -{ - u32 tmp_val = 0, if_id = 0, pup_id = 0; - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - *ptr = NULL; - - switch (flag_id) { - case 0: - *ptr = (u32 *)&(tm->if_act_mask); - break; - - case 0x1: - *ptr = (u32 *)&mask_tune_func; - break; - - case 0x2: - low_freq = (enum hws_ddr_freq)value; - break; - - case 0x3: - medium_freq = (enum hws_ddr_freq)value; - break; - - case 0x4: - *ptr = (u32 *)&generic_init_controller; - break; - - case 0x8: - *ptr = (u32 *)&start_xsb_offset; - break; - - case 0x20: - *ptr = (u32 *)&is_rl_old; - break; - - case 0x21: - *ptr = (u32 *)&is_freq_old; - break; - - case 0x23: - *ptr = (u32 *)&is_dfs_disabled; - break; - - case 0x24: - *ptr = (u32 *)&is_pll_before_init; - break; - - case 0x25: - *ptr = (u32 *)&is_adll_calib_before_init; - break; - case 0x28: - *ptr = (u32 *)&is_tune_result; - break; - - case 0x29: - *ptr = (u32 *)&is_validate_window_per_if; - break; - - case 0x2a: - *ptr = (u32 *)&is_validate_window_per_pup; - break; - - case 0x30: - *ptr = (u32 *)&sweep_cnt; - break; - - case 0x31: - *ptr = (u32 *)&is_bist_reset_bit; - break; - - case 0x32: - *ptr = (u32 *)&is_dfs_in_init; - break; - - case 0x33: - *ptr = (u32 *)&g_zpodt_data; - break; - - case 0x34: - *ptr = (u32 *)&g_znodt_data; - break; - - case 0x35: - break; - - case 0x36: - *ptr = (u32 *)&(freq_val[DDR_FREQ_LOW_FREQ]); - break; - - case 0x37: - *ptr = (u32 *)&start_pattern; - break; - - case 0x38: - *ptr = (u32 *)&end_pattern; - break; - - case 0x39: - *ptr = (u32 *)&phy_reg0_val; - break; - - case 0x4a: - *ptr = (u32 *)&phy_reg1_val; - break; - - case 0x4b: - *ptr = (u32 *)&phy_reg2_val; - break; - - case 0x4c: - *ptr = (u32 *)&phy_reg3_val; - break; - - case 0x4e: - sweep_pattern = (enum hws_pattern)value; - break; - - case 0x51: - *ptr = (u32 *)&g_znri_data; - break; - - case 0x52: - *ptr = (u32 *)&g_zpri_data; - break; - - case 0x53: - *ptr = (u32 *)&finger_test; - break; - - case 0x54: - *ptr = (u32 *)&n_finger_start; - break; - - case 0x55: - *ptr = (u32 *)&n_finger_end; - break; - - case 0x56: - *ptr = (u32 *)&p_finger_start; - break; - - case 0x57: - *ptr = (u32 *)&p_finger_end; - break; - - case 0x58: - *ptr = (u32 *)&p_finger_step; - break; - - case 0x59: - *ptr = (u32 *)&n_finger_step; - break; - - case 0x5a: - *ptr = (u32 *)&g_znri_ctrl; - break; - - case 0x5b: - *ptr = (u32 *)&g_zpri_ctrl; - break; - - case 0x5c: - *ptr = (u32 *)&is_reg_dump; - break; - - case 0x5d: - *ptr = (u32 *)&vref_init_val; - break; - - case 0x5e: - *ptr = (u32 *)&mode_2t; - break; - - case 0x5f: - *ptr = (u32 *)&xsb_validate_type; - break; - - case 0x60: - *ptr = (u32 *)&xsb_validation_base_address; - break; - - case 0x67: - *ptr = (u32 *)&activate_select_before_run_alg; - break; - - case 0x68: - *ptr = (u32 *)&activate_deselect_after_run_alg; - break; - - case 0x69: - *ptr = (u32 *)&odt_additional; - break; - - case 0x70: - *ptr = (u32 *)&debug_mode; - break; - - case 0x71: - pbs_pattern = (enum hws_pattern)value; - break; - - case 0x72: - *ptr = (u32 *)&delay_enable; - break; - - case 0x73: - *ptr = (u32 *)&ck_delay; - break; - - case 0x75: - *ptr = (u32 *)&ca_delay; - break; - - case 0x100: - *ptr = (u32 *)&debug_dunit; - break; - - case 0x101: - debug_acc = (int)value; - break; - - case 0x102: - debug_training = (u8)value; - break; - - case 0x103: - debug_training_bist = (u8)value; - break; - - case 0x104: - debug_centralization = (u8)value; - break; - - case 0x105: - debug_training_ip = (u8)value; - break; - - case 0x106: - debug_leveling = (u8)value; - break; - - case 0x107: - debug_pbs = (u8)value; - break; - - case 0x108: - debug_training_static = (u8)value; - break; - - case 0x109: - debug_training_access = (u8)value; - break; - - - case 0x112: - *ptr = &start_pattern; - break; - - case 0x113: - *ptr = &end_pattern; - break; - - default: - if ((flag_id >= 0x200) && (flag_id < 0x210)) { - if_id = flag_id - 0x200; - *ptr = (u32 *)&(tm->interface_params - [if_id].memory_freq); - } else if ((flag_id >= 0x210) && (flag_id < 0x220)) { - if_id = flag_id - 0x210; - *ptr = (u32 *)&(tm->interface_params - [if_id].speed_bin_index); - } else if ((flag_id >= 0x220) && (flag_id < 0x230)) { - if_id = flag_id - 0x220; - *ptr = (u32 *)&(tm->interface_params - [if_id].bus_width); - } else if ((flag_id >= 0x230) && (flag_id < 0x240)) { - if_id = flag_id - 0x230; - *ptr = (u32 *)&(tm->interface_params - [if_id].memory_size); - } else if ((flag_id >= 0x240) && (flag_id < 0x250)) { - if_id = flag_id - 0x240; - *ptr = (u32 *)&(tm->interface_params - [if_id].cas_l); - } else if ((flag_id >= 0x250) && (flag_id < 0x260)) { - if_id = flag_id - 0x250; - *ptr = (u32 *)&(tm->interface_params - [if_id].cas_wl); - } else if ((flag_id >= 0x270) && (flag_id < 0x2cf)) { - if_id = (flag_id - 0x270) / MAX_BUS_NUM; - pup_id = (flag_id - 0x270) % MAX_BUS_NUM; - *ptr = (u32 *)&(tm->interface_params[if_id]. - as_bus_params[pup_id].is_ck_swap); - } else if ((flag_id >= 0x2d0) && (flag_id < 0x32f)) { - if_id = (flag_id - 0x2d0) / MAX_BUS_NUM; - pup_id = (flag_id - 0x2d0) % MAX_BUS_NUM; - *ptr = (u32 *)&(tm->interface_params[if_id]. - as_bus_params[pup_id].is_dqs_swap); - } else if ((flag_id >= 0x330) && (flag_id < 0x38f)) { - if_id = (flag_id - 0x330) / MAX_BUS_NUM; - pup_id = (flag_id - 0x330) % MAX_BUS_NUM; - *ptr = (u32 *)&(tm->interface_params[if_id]. - as_bus_params[pup_id].cs_bitmask); - } else if ((flag_id >= 0x390) && (flag_id < 0x3ef)) { - if_id = (flag_id - 0x390) / MAX_BUS_NUM; - pup_id = (flag_id - 0x390) % MAX_BUS_NUM; - *ptr = (u32 *)&(tm->interface_params - [if_id].as_bus_params - [pup_id].mirror_enable_bitmask); - } else if ((flag_id >= 0x500) && (flag_id <= 0x50f)) { - tmp_val = flag_id - 0x320; - *ptr = (u32 *)&(clamp_tbl[tmp_val]); - } else { - DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, - ("flag_id out of boundary %d\n", - flag_id)); - return MV_BAD_PARAM; - } - } - - return MV_OK; -} - #endif /* EXCLUDE_SWITCH_DEBUG */ #if defined(DDR_VIEWER_TOOL) @@ -1315,7 +951,7 @@ int ddr3_tip_run_sweep_test(int dev_num, u32 repeat_num, u32 direction, u32 reg; enum hws_access_type pup_access; u32 cs; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); @@ -1462,7 +1098,7 @@ int ddr3_tip_run_leveling_sweep_test(int dev_num, u32 repeat_num, u32 reg; enum hws_access_type pup_access; u32 cs; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); diff --git a/drivers/ddr/marvell/a38x/ddr3_init.c b/drivers/ddr/marvell/a38x/ddr3_init.c index 27dbf4f44b9..22c8f9ca54e 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.c +++ b/drivers/ddr/marvell/a38x/ddr3_init.c @@ -6,18 +6,6 @@ #include "ddr3_init.h" #include "mv_ddr_common.h" -/* - * Translates topology map definitions to real memory size in bits - * (per values in ddr3_training_ip_def.h) - */ -u32 mem_size[] = { - ADDR_SIZE_512MB, - ADDR_SIZE_1GB, - ADDR_SIZE_2GB, - ADDR_SIZE_4GB, - ADDR_SIZE_8GB -}; - static char *ddr_type = "DDR3"; /* @@ -37,8 +25,6 @@ static int mv_ddr_training_params_set(u8 dev_num); */ int ddr3_init(void) { - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - u32 octets_per_if_num; int status; int is_manual_cal_done; @@ -55,7 +41,7 @@ int ddr3_init(void) mv_ddr_early_init(); - if (mv_ddr_topology_map_update() == NULL) { + if (mv_ddr_topology_map_update()) { printf("mv_ddr: failed to update topology\n"); return MV_FAIL; } @@ -68,7 +54,6 @@ int ddr3_init(void) if (MV_OK != status) return status; - mv_ddr_mc_config(); is_manual_cal_done = mv_ddr_manual_cal_do(); @@ -101,76 +86,14 @@ int ddr3_init(void) mv_ddr_post_training_fixup(); - octets_per_if_num = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); - if (ddr3_if_ecc_enabled()) { - if (MV_DDR_IS_64BIT_DRAM_MODE(tm->bus_act_mask) || - MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(tm->bus_act_mask, octets_per_if_num)) - mv_ddr_mem_scrubbing(); - else - ddr3_new_tip_ecc_scrub(); - } + if (mv_ddr_is_ecc_ena()) + mv_ddr_mem_scrubbing(); printf("mv_ddr: completed successfully\n"); return MV_OK; } -uint64_t mv_ddr_get_memory_size_per_cs_in_bits(void) -{ - uint64_t memory_size_per_cs; - - u32 bus_cnt, num_of_active_bus = 0; - u32 num_of_sub_phys_per_ddr_unit = 0; - - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - u32 octets_per_if_num = ddr3_tip_dev_attr_get(DEV_NUM_0, MV_ATTR_OCTET_PER_INTERFACE); - - /* count the number of active bus */ - for (bus_cnt = 0; bus_cnt < octets_per_if_num - 1/* ignore ecc octet */; bus_cnt++) { - VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_cnt); - num_of_active_bus++; - } - - /* calculate number of sub-phys per ddr unit */ - if (tm->interface_params[0].bus_width/* supports only single interface */ == MV_DDR_DEV_WIDTH_16BIT) - num_of_sub_phys_per_ddr_unit = TWO_SUB_PHYS; - if (tm->interface_params[0].bus_width/* supports only single interface */ == MV_DDR_DEV_WIDTH_8BIT) - num_of_sub_phys_per_ddr_unit = SINGLE_SUB_PHY; - - /* calculate dram size per cs */ - memory_size_per_cs = (uint64_t)mem_size[tm->interface_params[0].memory_size] * (uint64_t)num_of_active_bus - / (uint64_t)num_of_sub_phys_per_ddr_unit * (uint64_t)MV_DDR_NUM_BITS_IN_BYTE; - - return memory_size_per_cs; -} - -uint64_t mv_ddr_get_total_memory_size_in_bits(void) -{ - uint64_t total_memory_size = 0; - uint64_t memory_size_per_cs = 0; - - /* get the number of cs */ - u32 max_cs = ddr3_tip_max_cs_get(DEV_NUM_0); - - memory_size_per_cs = mv_ddr_get_memory_size_per_cs_in_bits(); - total_memory_size = (uint64_t)max_cs * memory_size_per_cs; - - return total_memory_size; -} - -int ddr3_if_ecc_enabled(void) -{ - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask) || - DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask) || - DDR3_IS_ECC_PUP8_MODE(tm->bus_act_mask)) - return 1; - else - return 0; -} - /* * Name: mv_ddr_training_params_set * Desc: @@ -182,15 +105,9 @@ static int mv_ddr_training_params_set(u8 dev_num) { struct tune_train_params params; int status; - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - u32 if_id; u32 cs_num; - CHECK_STATUS(ddr3_tip_get_first_active_if - (dev_num, tm->if_act_mask, - &if_id)); - - CHECK_STATUS(calc_cs_num(dev_num, if_id, &cs_num)); + cs_num = mv_ddr_cs_num_get(); /* NOTE: do not remove any field initilization */ params.ck_delay = TUNE_TRAINING_PARAMS_CK_DELAY; diff --git a/drivers/ddr/marvell/a38x/ddr3_init.h b/drivers/ddr/marvell/a38x/ddr3_init.h index 382bd922f21..055516b67e9 100644 --- a/drivers/ddr/marvell/a38x/ddr3_init.h +++ b/drivers/ddr/marvell/a38x/ddr3_init.h @@ -7,9 +7,7 @@ #define _DDR3_INIT_H #include "ddr_ml_wrapper.h" -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) #include "mv_ddr_plat.h" -#endif #include "seq_exec.h" #include "ddr3_logging_def.h" @@ -32,14 +30,8 @@ return status; \ } -#define GET_MAX_VALUE(x, y) \ - ((x) > (y)) ? (x) : (y) - #define SUB_VERSION 0 -/* max number of devices supported by driver */ -#define MAX_DEVICE_NUM 1 - enum log_level { MV_LOG_LEVEL_0, MV_LOG_LEVEL_1, @@ -47,24 +39,26 @@ enum log_level { MV_LOG_LEVEL_3 }; +/* TODO: consider to move to misl phy driver */ +#define MISL_PHY_DRV_P_OFFS 0x7 +#define MISL_PHY_DRV_N_OFFS 0x0 +#define MISL_PHY_ODT_P_OFFS 0x6 +#define MISL_PHY_ODT_N_OFFS 0x0 + /* Globals */ extern u8 debug_training, debug_calibration, debug_ddr4_centralization, debug_tap_tuning, debug_dm_tuning; extern u8 is_reg_dump; extern u8 generic_init_controller; -/* list of allowed frequency listed in order of enum hws_ddr_freq */ -extern u32 freq_val[DDR_FREQ_LAST]; +/* list of allowed frequency listed in order of enum mv_ddr_freq */ extern u32 is_pll_old; -extern struct cl_val_per_freq cas_latency_table[]; extern struct pattern_info pattern_table[]; -extern struct cl_val_per_freq cas_write_latency_table[]; extern u8 debug_centralization, debug_training_ip, debug_training_bist, debug_pbs, debug_training_static, debug_leveling; extern struct hws_tip_config_func_db config_func_info[]; extern u8 twr_mask_table[]; extern u8 cl_mask_table[]; extern u8 cwl_mask_table[]; -extern u16 rfc_table[]; extern u32 speed_bin_table_t_rc[]; extern u32 speed_bin_table_t_rcd_t_rp[]; @@ -90,10 +84,10 @@ extern u32 mask_tune_func; extern u32 rl_version; extern int rl_mid_freq_wa; extern u8 calibration_update_control; /* 2 external only, 1 is internal only */ -extern enum hws_ddr_freq medium_freq; +extern enum mv_ddr_freq medium_freq; extern enum hws_result training_result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]; -extern enum hws_ddr_freq low_freq; +extern enum mv_ddr_freq low_freq; extern enum auto_tune_stage training_stage; extern u32 is_pll_before_init; extern u32 is_adll_calib_before_init; @@ -120,7 +114,7 @@ extern u32 odt_additional; extern u32 debug_mode; extern u32 debug_dunit; extern u32 clamp_tbl[]; -extern u32 freq_mask[MAX_DEVICE_NUM][DDR_FREQ_LAST]; +extern u32 freq_mask[MAX_DEVICE_NUM][MV_DDR_FREQ_LAST]; extern u32 maxt_poll_tries; extern u32 is_bist_reset_bit; @@ -139,7 +133,6 @@ extern u16 mask_results_dq_reg_map[]; extern u32 target_freq; extern u32 dfs_low_freq; -extern u32 mem_size[]; extern u32 nominal_avs; extern u32 extension_avs; @@ -154,13 +147,8 @@ int mv_ddr_early_init(void); int mv_ddr_early_init2(void); int ddr3_silicon_post_init(void); int ddr3_post_run_alg(void); -int ddr3_if_ecc_enabled(void); void ddr3_new_tip_ecc_scrub(void); -void mv_ddr_ver_print(void); -struct mv_ddr_topology_map *mv_ddr_topology_map_get(void); - -int ddr3_if_ecc_enabled(void); int ddr3_tip_reg_write(u32 dev_num, u32 reg_addr, u32 data); int ddr3_tip_reg_read(u32 dev_num, u32 reg_addr, u32 *data, u32 reg_mask); int ddr3_silicon_get_ddr_target_freq(u32 *ddr_freq); @@ -185,15 +173,20 @@ void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps); void ddr3_fast_path_static_cs_size_config(u32 cs_ena); u32 mv_board_id_index_get(u32 board_id); void ddr3_set_log_level(u32 n_log_level); -int calc_cs_num(u32 dev_num, u32 if_id, u32 *cs_num); int hws_ddr3_cs_base_adr_calc(u32 if_id, u32 cs, u32 *cs_base_addr); int ddr3_tip_print_pbs_result(u32 dev_num, u32 cs_num, enum pbs_dir pbs_mode); int ddr3_tip_clean_pbs_result(u32 dev_num, enum pbs_dir pbs_mode); - -u32 mv_ddr_init_freq_get(void); void mv_ddr_mc_config(void); int mv_ddr_mc_init(void); void mv_ddr_set_calib_controller(void); +/* TODO: consider to move to misl phy driver */ +unsigned int mv_ddr_misl_phy_drv_data_p_get(void); +unsigned int mv_ddr_misl_phy_drv_data_n_get(void); +unsigned int mv_ddr_misl_phy_drv_ctrl_p_get(void); +unsigned int mv_ddr_misl_phy_drv_ctrl_n_get(void); +unsigned int mv_ddr_misl_phy_odt_p_get(void); +unsigned int mv_ddr_misl_phy_odt_n_get(void); + #endif /* _DDR3_INIT_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_topology_def.h b/drivers/ddr/marvell/a38x/ddr3_topology_def.h deleted file mode 100644 index 1963bae3e62..00000000000 --- a/drivers/ddr/marvell/a38x/ddr3_topology_def.h +++ /dev/null @@ -1,78 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) Marvell International Ltd. and its affiliates - */ - -#ifndef _DDR3_TOPOLOGY_DEF_H -#define _DDR3_TOPOLOGY_DEF_H - -#define DEV_NUM_0 0 - -/* TOPOLOGY */ -enum hws_speed_bin { - SPEED_BIN_DDR_800D, - SPEED_BIN_DDR_800E, - SPEED_BIN_DDR_1066E, - SPEED_BIN_DDR_1066F, - SPEED_BIN_DDR_1066G, - SPEED_BIN_DDR_1333F, - SPEED_BIN_DDR_1333G, - SPEED_BIN_DDR_1333H, - SPEED_BIN_DDR_1333J, - SPEED_BIN_DDR_1600G, - SPEED_BIN_DDR_1600H, - SPEED_BIN_DDR_1600J, - SPEED_BIN_DDR_1600K, - SPEED_BIN_DDR_1866J, - SPEED_BIN_DDR_1866K, - SPEED_BIN_DDR_1866L, - SPEED_BIN_DDR_1866M, - SPEED_BIN_DDR_2133K, - SPEED_BIN_DDR_2133L, - SPEED_BIN_DDR_2133M, - SPEED_BIN_DDR_2133N, - - SPEED_BIN_DDR_1333H_EXT, - SPEED_BIN_DDR_1600K_EXT, - SPEED_BIN_DDR_1866M_EXT -}; - -enum hws_ddr_freq { - DDR_FREQ_LOW_FREQ, - DDR_FREQ_400, - DDR_FREQ_533, - DDR_FREQ_667, - DDR_FREQ_800, - DDR_FREQ_933, - DDR_FREQ_1066, - DDR_FREQ_311, - DDR_FREQ_333, - DDR_FREQ_467, - DDR_FREQ_850, - DDR_FREQ_600, - DDR_FREQ_300, - DDR_FREQ_900, - DDR_FREQ_360, - DDR_FREQ_1000, - DDR_FREQ_LAST, - DDR_FREQ_SAR -}; - -enum speed_bin_table_elements { - SPEED_BIN_TRCD, - SPEED_BIN_TRP, - SPEED_BIN_TRAS, - SPEED_BIN_TRC, - SPEED_BIN_TRRD1K, - SPEED_BIN_TRRD2K, - SPEED_BIN_TPD, - SPEED_BIN_TFAW1K, - SPEED_BIN_TFAW2K, - SPEED_BIN_TWTR, - SPEED_BIN_TRTP, - SPEED_BIN_TWR, - SPEED_BIN_TMOD, - SPEED_BIN_TXPDLL -}; - -#endif /* _DDR3_TOPOLOGY_DEF_H */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training.c b/drivers/ddr/marvell/a38x/ddr3_training.c index 799c5ba089a..c7be700d641 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training.c +++ b/drivers/ddr/marvell/a38x/ddr3_training.c @@ -5,6 +5,8 @@ #include "ddr3_init.h" #include "mv_ddr_common.h" +#include "mv_ddr_training_db.h" +#include "mv_ddr_regs.h" #define GET_CS_FROM_MASK(mask) (cs_mask2_num[mask]) #define CS_CBE_VALUE(cs_num) (cs_cbe_reg[cs_num]) @@ -14,8 +16,8 @@ u32 phy_reg0_val = 0; u32 phy_reg1_val = 8; u32 phy_reg2_val = 0; u32 phy_reg3_val = PARAM_UNDEFINED; -enum hws_ddr_freq low_freq = DDR_FREQ_LOW_FREQ; -enum hws_ddr_freq medium_freq; +enum mv_ddr_freq low_freq = MV_DDR_FREQ_LOW_FREQ; +enum mv_ddr_freq medium_freq; u32 debug_dunit = 0; u32 odt_additional = 1; u32 *dq_map_table = NULL; @@ -97,36 +99,9 @@ static int odt_test(u32 dev_num, enum hws_algo_type algo_type); #endif int adll_calibration(u32 dev_num, enum hws_access_type access_type, - u32 if_id, enum hws_ddr_freq frequency); + u32 if_id, enum mv_ddr_freq frequency); static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, - u32 if_id, enum hws_ddr_freq frequency); - -static struct page_element page_tbl[] = { - /* - * 8bits 16 bits - * page-size(K) page-size(K) mask - */ - { 1, 2, 2}, - /* 512M */ - { 1, 2, 3}, - /* 1G */ - { 1, 2, 0}, - /* 2G */ - { 1, 2, 4}, - /* 4G */ - { 2, 2, 5}, - /* 8G */ - {0, 0, 0}, /* TODO: placeholder for 16-Mbit die capacity */ - {0, 0, 0}, /* TODO: placeholder for 32-Mbit die capacity */ - {0, 0, 0}, /* TODO: placeholder for 12-Mbit die capacity */ - {0, 0, 0} /* TODO: placeholder for 24-Mbit die capacity */ - -}; - -struct page_element *mv_ddr_page_tbl_get(void) -{ - return &page_tbl[0]; -} + u32 if_id, enum mv_ddr_freq frequency); static u8 mem_size_config[MV_DDR_DIE_CAP_LAST] = { 0x2, /* 512Mbit */ @@ -204,7 +179,52 @@ struct mv_ddr_mr_data mr_data[] = { {MRS3_CMD, MR3_REG} }; -static int ddr3_tip_pad_inv(u32 dev_num, u32 if_id); +/* inverse pads */ +static int ddr3_tip_pad_inv(void) +{ + u32 sphy, data; + u32 sphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); + u32 ck_swap_ctrl_sphy; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + + for (sphy = 0; sphy < sphy_max; sphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, sphy); + if (tm->interface_params[0]. + as_bus_params[sphy].is_dqs_swap == 1) { + data = (INVERT_PAD << INV_PAD4_OFFS | + INVERT_PAD << INV_PAD5_OFFS); + /* dqs swap */ + ddr3_tip_bus_read_modify_write(0, ACCESS_TYPE_UNICAST, + 0, sphy, + DDR_PHY_DATA, + PHY_CTRL_PHY_REG, + data, data); + } + + if (tm->interface_params[0].as_bus_params[sphy]. + is_ck_swap == 1 && sphy == 0) { +/* TODO: move this code to per platform one */ +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) + /* clock swap for both cs0 and cs1 */ + data = (INVERT_PAD << INV_PAD2_OFFS | + INVERT_PAD << INV_PAD6_OFFS | + INVERT_PAD << INV_PAD4_OFFS | + INVERT_PAD << INV_PAD5_OFFS); + ck_swap_ctrl_sphy = CK_SWAP_CTRL_PHY_NUM; + ddr3_tip_bus_read_modify_write(0, ACCESS_TYPE_UNICAST, + 0, ck_swap_ctrl_sphy, + DDR_PHY_CONTROL, + PHY_CTRL_PHY_REG, + data, data); +#else /* !CONFIG_ARMADA_38X && !CONFIG_ARMADA_39X && !A70X0 && !A80X0 && !A3900 */ +#pragma message "unknown platform to configure ddr clock swap" +#endif + } + } + + return MV_OK; +} + static int ddr3_tip_rank_control(u32 dev_num, u32 if_id); /* @@ -244,6 +264,7 @@ int ddr3_tip_tune_training_params(u32 dev_num, if (params->g_rtt_park != PARAM_UNDEFINED) g_rtt_park = params->g_rtt_park; + DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("DGL parameters: 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", g_zpri_data, g_znri_data, g_zpri_ctrl, g_znri_ctrl, g_zpodt_data, g_znodt_data, @@ -309,44 +330,6 @@ int ddr3_tip_configure_cs(u32 dev_num, u32 if_id, u32 cs_num, u32 enable) } /* - * Calculate number of CS - */ -int calc_cs_num(u32 dev_num, u32 if_id, u32 *cs_num) -{ - u32 cs; - u32 bus_cnt; - u32 cs_count; - u32 cs_bitmask; - u32 curr_cs_num = 0; - u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - for (bus_cnt = 0; bus_cnt < octets_per_if_num; bus_cnt++) { - VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_cnt); - cs_count = 0; - cs_bitmask = tm->interface_params[if_id]. - as_bus_params[bus_cnt].cs_bitmask; - for (cs = 0; cs < MAX_CS_NUM; cs++) { - if ((cs_bitmask >> cs) & 1) - cs_count++; - } - - if (curr_cs_num == 0) { - curr_cs_num = cs_count; - } else if (cs_count != curr_cs_num) { - DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, - ("CS number is different per bus (IF %d BUS %d cs_num %d curr_cs_num %d)\n", - if_id, bus_cnt, cs_count, - curr_cs_num)); - return MV_NOT_SUPPORTED; - } - } - *cs_num = curr_cs_num; - - return MV_OK; -} - -/* * Init Controller Flow */ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_prm) @@ -356,7 +339,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ u32 t_ckclk = 0, t_wr = 0, t2t = 0; u32 data_value = 0, cs_cnt = 0, mem_mask = 0, bus_index = 0; - enum hws_speed_bin speed_bin_index = SPEED_BIN_DDR_2133N; + enum mv_ddr_speed_bin speed_bin_index = SPEED_BIN_DDR_2133N; u32 cs_mask = 0; u32 cl_value = 0, cwl_val = 0; u32 bus_cnt = 0, adll_tap = 0; @@ -364,8 +347,8 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ u32 data_read[MAX_INTERFACE_NUM]; u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - enum hws_ddr_freq freq = tm->interface_params[0].memory_freq; enum mv_ddr_timing timing; + enum mv_ddr_freq freq = tm->interface_params[0].memory_freq; DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, ("Init_controller, do_mrs_phy=%d, is_ctrl64_bit=%d\n", @@ -403,7 +386,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ speed_bin_index; /* t_ckclk is external clock */ - t_ckclk = (MEGA / freq_val[freq]); + t_ckclk = (MEGA / mv_ddr_freq_get(freq)); if (MV_DDR_IS_HALF_BUS_DRAM_MODE(tm->bus_act_mask, octets_per_if_num)) data_value = (0x4000 | 0 | 0x1000000) & ~(1 << 26); @@ -508,7 +491,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ * configure them both: The Bust_width it\92s the * Memory Bus width \96 x8 or x16 */ - for (cs_cnt = 0; cs_cnt < NUM_OF_CS; cs_cnt++) { + for (cs_cnt = 0; cs_cnt < MAX_CS_NUM; cs_cnt++) { ddr3_tip_configure_cs(dev_num, if_id, cs_cnt, ((cs_mask & (1 << cs_cnt)) ? 1 : 0)); @@ -534,7 +517,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ ("cl_value 0x%x cwl_val 0x%x\n", cl_value, cwl_val)); - t_wr = time_to_nclk(speed_bin_table + t_wr = time_to_nclk(mv_ddr_speed_bin_timing_get (speed_bin_index, SPEED_BIN_TWR), t_ckclk); @@ -612,8 +595,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ t2t = (timing == MV_DDR_TIM_2T) ? 1 : 0; } else { /* calculate number of CS (per interface) */ - CHECK_STATUS(calc_cs_num - (dev_num, if_id, &cs_num)); + cs_num = mv_ddr_cs_num_get(); t2t = (cs_num == 1) ? 0 : 1; } @@ -666,9 +648,8 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); CHECK_STATUS(ddr3_tip_rank_control(dev_num, if_id)); - if (init_cntr_prm->do_mrs_phy) { - CHECK_STATUS(ddr3_tip_pad_inv(dev_num, if_id)); - } + if (init_cntr_prm->do_mrs_phy) + ddr3_tip_pad_inv(); /* Pad calibration control - disable */ CHECK_STATUS(ddr3_tip_if_write @@ -682,7 +663,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, struct init_cntr_param *init_cntr_ if (delay_enable != 0) { - adll_tap = MEGA / (freq_val[freq] * 64); + adll_tap = MEGA / (mv_ddr_freq_get(freq) * 64); ddr3_tip_cmd_addr_init_delay(dev_num, adll_tap); } @@ -788,48 +769,6 @@ static int ddr3_tip_rank_control(u32 dev_num, u32 if_id) } /* - * PAD Inverse Flow - */ -static int ddr3_tip_pad_inv(u32 dev_num, u32 if_id) -{ - u32 bus_cnt, data_value, ck_swap_pup_ctrl; - u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - for (bus_cnt = 0; bus_cnt < octets_per_if_num; bus_cnt++) { - VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_cnt); - if (tm->interface_params[if_id]. - as_bus_params[bus_cnt].is_dqs_swap == 1) { - /* dqs swap */ - ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, - if_id, bus_cnt, - DDR_PHY_DATA, - PHY_CTRL_PHY_REG, 0xc0, - 0xc0); - } - - if (tm->interface_params[if_id]. - as_bus_params[bus_cnt].is_ck_swap == 1) { - if (bus_cnt <= 1) - data_value = 0x5 << 2; - else - data_value = 0xa << 2; - - /* mask equals data */ - /* ck swap pup is only control pup #0 ! */ - ck_swap_pup_ctrl = 0; - ddr3_tip_bus_read_modify_write(dev_num, ACCESS_TYPE_UNICAST, - if_id, ck_swap_pup_ctrl, - DDR_PHY_CONTROL, - PHY_CTRL_PHY_REG, - data_value, data_value); - } - } - - return MV_OK; -} - -/* * Algorithm Parameters Validation */ int ddr3_tip_validate_algo_var(u32 value, u32 fail_value, char *var_name) @@ -1182,7 +1121,7 @@ int ddr3_tip_bus_read_modify_write(u32 dev_num, enum hws_access_type access_type * ADLL Calibration */ int adll_calibration(u32 dev_num, enum hws_access_type access_type, - u32 if_id, enum hws_ddr_freq frequency) + u32 if_id, enum mv_ddr_freq frequency) { struct hws_tip_freq_config_info freq_config_info; u32 bus_cnt = 0; @@ -1229,7 +1168,7 @@ int adll_calibration(u32 dev_num, enum hws_access_type access_type, CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, DRAM_PHY_CFG_REG, 0, (0x80000000 | 0x40000000))); - mdelay(100 / (freq_val[frequency] / freq_val[DDR_FREQ_LOW_FREQ])); + mdelay(100 / (mv_ddr_freq_get(frequency)) / mv_ddr_freq_get(MV_DDR_FREQ_LOW_FREQ)); CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, DRAM_PHY_CFG_REG, (0x80000000 | 0x40000000), (0x80000000 | 0x40000000))); @@ -1255,7 +1194,7 @@ int adll_calibration(u32 dev_num, enum hws_access_type access_type, } int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, - u32 if_id, enum hws_ddr_freq frequency) + u32 if_id, enum mv_ddr_freq frequency) { u32 cl_value = 0, cwl_value = 0, mem_mask = 0, val = 0, bus_cnt = 0, t_wr = 0, t_ckclk = 0, @@ -1263,7 +1202,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, u32 end_if, start_if; u32 bus_index = 0; int is_dll_off = 0; - enum hws_speed_bin speed_bin_index = 0; + enum mv_ddr_speed_bin speed_bin_index = 0; struct hws_tip_freq_config_info freq_config_info; enum hws_result *flow_result = training_result[training_stage]; u32 adll_tap = 0; @@ -1274,12 +1213,13 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); unsigned int tclk; enum mv_ddr_timing timing = tm->interface_params[if_id].timing; + u32 freq = mv_ddr_freq_get(frequency); DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, ("dev %d access %d IF %d freq %d\n", dev_num, access_type, if_id, frequency)); - if (frequency == DDR_FREQ_LOW_FREQ) + if (frequency == MV_DDR_FREQ_LOW_FREQ) is_dll_off = 1; if (access_type == ACCESS_TYPE_MULTICAST) { start_if = 0; @@ -1318,7 +1258,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, cwl_value = tm->interface_params[if_id].cas_wl; } else if (tm->cfg_src == MV_DDR_CFG_SPD) { - tclk = 1000000 / freq_val[frequency]; + tclk = 1000000 / freq; cl_value = mv_ddr_cl_calc(tm->timing_data[MV_DDR_TAA_MIN], tclk); if (cl_value == 0) { printf("mv_ddr: unsupported cas latency value found\n"); @@ -1330,11 +1270,8 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, return MV_FAIL; } } else { - cl_value = - cas_latency_table[speed_bin_index].cl_val[frequency]; - cwl_value = - cas_write_latency_table[speed_bin_index]. - cl_val[frequency]; + cl_value = mv_ddr_cl_val_get(speed_bin_index, frequency); + cwl_value = mv_ddr_cwl_val_get(speed_bin_index, frequency); } DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, @@ -1342,11 +1279,9 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, dev_num, access_type, if_id, frequency, speed_bin_index)); - for (cnt_id = 0; cnt_id < DDR_FREQ_LAST; cnt_id++) { + for (cnt_id = 0; cnt_id < MV_DDR_FREQ_LAST; cnt_id++) { DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, - ("%d ", - cas_latency_table[speed_bin_index]. - cl_val[cnt_id])); + ("%d ", mv_ddr_cl_val_get(speed_bin_index, cnt_id))); } DEBUG_TRAINING_IP(DEBUG_LEVEL_TRACE, ("\n")); @@ -1420,7 +1355,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, t2t = (timing == MV_DDR_TIM_2T) ? 1 : 0; } else { /* Calculate number of CS per interface */ - CHECK_STATUS(calc_cs_num(dev_num, if_id, &cs_num)); + cs_num = mv_ddr_cs_num_get(); t2t = (cs_num == 1) ? 0 : 1; } @@ -1455,8 +1390,8 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, (dev_num, access_type, if_id, DFS_REG, (cwl_mask_table[cwl_value] << 12), 0x7000)); - t_ckclk = (MEGA / freq_val[frequency]); - t_wr = time_to_nclk(speed_bin_table + t_ckclk = (MEGA / freq); + t_wr = time_to_nclk(mv_ddr_speed_bin_timing_get (speed_bin_index, SPEED_BIN_TWR), t_ckclk); @@ -1517,7 +1452,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, (dev_num, access_type, if_id, DRAM_PHY_CFG_REG, 0, (0x80000000 | 0x40000000))); - mdelay(100 / (freq_val[frequency] / freq_val[DDR_FREQ_LOW_FREQ])); + mdelay(100 / (freq / mv_ddr_freq_get(MV_DDR_FREQ_LOW_FREQ))); CHECK_STATUS(ddr3_tip_if_write (dev_num, access_type, if_id, DRAM_PHY_CFG_REG, (0x80000000 | 0x40000000), @@ -1544,7 +1479,7 @@ int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type access_type, /* Set proper timing params before existing Self-Refresh */ ddr3_tip_set_timing(dev_num, access_type, if_id, frequency); if (delay_enable != 0) { - adll_tap = (is_dll_off == 1) ? 1000 : (MEGA / (freq_val[frequency] * 64)); + adll_tap = (is_dll_off == 1) ? 1000 : (MEGA / (freq * 64)); ddr3_tip_cmd_addr_init_delay(dev_num, adll_tap); } @@ -1682,7 +1617,7 @@ static int ddr3_tip_write_odt(u32 dev_num, enum hws_access_type access_type, * Set Timing values for training */ static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, - u32 if_id, enum hws_ddr_freq frequency) + u32 if_id, enum mv_ddr_freq frequency) { u32 t_ckclk = 0, t_ras = 0; u32 t_rcd = 0, t_rp = 0, t_wr = 0, t_wtr = 0, t_rrd = 0, t_rtp = 0, @@ -1690,66 +1625,63 @@ static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, t_r2w_w2r = 0x3, t_r2w_w2r_high = 0x1, t_w2w = 0x3; u32 refresh_interval_cnt, t_hclk, t_refi, t_faw, t_pd, t_xpdll; u32 val = 0, page_size = 0, mask = 0; - enum hws_speed_bin speed_bin_index; + enum mv_ddr_speed_bin speed_bin_index; enum mv_ddr_die_capacity memory_size = MV_DDR_DIE_CAP_2GBIT; struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - struct page_element *page_param = mv_ddr_page_tbl_get(); + u32 freq = mv_ddr_freq_get(frequency); speed_bin_index = tm->interface_params[if_id].speed_bin_index; memory_size = tm->interface_params[if_id].memory_size; - page_size = - (tm->interface_params[if_id].bus_width == - MV_DDR_DEV_WIDTH_8BIT) ? page_param[memory_size]. - page_size_8bit : page_param[memory_size].page_size_16bit; - t_ckclk = (MEGA / freq_val[frequency]); + page_size = mv_ddr_page_size_get(tm->interface_params[if_id].bus_width, memory_size); + t_ckclk = (MEGA / freq); /* HCLK in[ps] */ - t_hclk = MEGA / (freq_val[frequency] / config_func_info[dev_num].tip_get_clock_ratio(frequency)); + t_hclk = MEGA / (freq / config_func_info[dev_num].tip_get_clock_ratio(frequency)); t_refi = (tm->interface_params[if_id].interface_temp == MV_DDR_TEMP_HIGH) ? TREFI_HIGH : TREFI_LOW; t_refi *= 1000; /* psec */ refresh_interval_cnt = t_refi / t_hclk; /* no units */ if (page_size == 1) { - t_faw = speed_bin_table(speed_bin_index, SPEED_BIN_TFAW1K); + t_faw = mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TFAW1K); t_faw = time_to_nclk(t_faw, t_ckclk); t_faw = GET_MAX_VALUE(20, t_faw); } else { /* page size =2, we do not support page size 0.5k */ - t_faw = speed_bin_table(speed_bin_index, SPEED_BIN_TFAW2K); + t_faw = mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TFAW2K); t_faw = time_to_nclk(t_faw, t_ckclk); t_faw = GET_MAX_VALUE(28, t_faw); } - t_pd = GET_MAX_VALUE(t_ckclk * 3, speed_bin_table(speed_bin_index, SPEED_BIN_TPD)); + t_pd = GET_MAX_VALUE(t_ckclk * 3, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TPD)); t_pd = time_to_nclk(t_pd, t_ckclk); - t_xpdll = GET_MAX_VALUE(t_ckclk * 10, speed_bin_table(speed_bin_index, SPEED_BIN_TXPDLL)); + t_xpdll = GET_MAX_VALUE(t_ckclk * 10, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TXPDLL)); t_xpdll = time_to_nclk(t_xpdll, t_ckclk); - t_rrd = (page_size == 1) ? speed_bin_table(speed_bin_index, + t_rrd = (page_size == 1) ? mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRRD1K) : - speed_bin_table(speed_bin_index, SPEED_BIN_TRRD2K); + mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRRD2K); t_rrd = GET_MAX_VALUE(t_ckclk * 4, t_rrd); - t_rtp = GET_MAX_VALUE(t_ckclk * 4, speed_bin_table(speed_bin_index, + t_rtp = GET_MAX_VALUE(t_ckclk * 4, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRTP)); t_mod = GET_MAX_VALUE(t_ckclk * 12, 15000); - t_wtr = GET_MAX_VALUE(t_ckclk * 4, speed_bin_table(speed_bin_index, + t_wtr = GET_MAX_VALUE(t_ckclk * 4, mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TWTR)); - t_ras = time_to_nclk(speed_bin_table(speed_bin_index, + t_ras = time_to_nclk(mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRAS), t_ckclk); - t_rcd = time_to_nclk(speed_bin_table(speed_bin_index, + t_rcd = time_to_nclk(mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRCD), t_ckclk); - t_rp = time_to_nclk(speed_bin_table(speed_bin_index, + t_rp = time_to_nclk(mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TRP), t_ckclk); - t_wr = time_to_nclk(speed_bin_table(speed_bin_index, + t_wr = time_to_nclk(mv_ddr_speed_bin_timing_get(speed_bin_index, SPEED_BIN_TWR), t_ckclk); t_wtr = time_to_nclk(t_wtr, t_ckclk); t_rrd = time_to_nclk(t_rrd, t_ckclk); t_rtp = time_to_nclk(t_rtp, t_ckclk); - t_rfc = time_to_nclk(rfc_table[memory_size] * 1000, t_ckclk); + t_rfc = time_to_nclk(mv_ddr_rfc_get(memory_size) * 1000, t_ckclk); t_mod = time_to_nclk(t_mod, t_ckclk); /* SDRAM Timing Low */ @@ -1827,68 +1759,6 @@ static int ddr3_tip_set_timing(u32 dev_num, enum hws_access_type access_type, /* - * Mode Read - */ -int hws_ddr3_tip_mode_read(u32 dev_num, struct mode_info *mode_info) -{ - u32 ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - MR0_REG, mode_info->reg_mr0, MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - MR1_REG, mode_info->reg_mr1, MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - MR2_REG, mode_info->reg_mr2, MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - MR3_REG, mode_info->reg_mr2, MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - RD_DATA_SMPL_DLYS_REG, mode_info->read_data_sample, - MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - ret = ddr3_tip_if_read(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, - RD_DATA_RDY_DLYS_REG, mode_info->read_data_ready, - MASK_ALL_BITS); - if (ret != MV_OK) - return ret; - - return MV_OK; -} - -/* - * Get first active IF - */ -int ddr3_tip_get_first_active_if(u8 dev_num, u32 interface_mask, - u32 *interface_id) -{ - u32 if_id; - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - - for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { - VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); - if (interface_mask & (1 << if_id)) { - *interface_id = if_id; - break; - } - } - - return MV_OK; -} - -/* * Write CS Result */ int ddr3_tip_write_cs_result(u32 dev_num, u32 offset) @@ -2139,9 +2009,10 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) int ret = MV_OK; int adll_bypass_flag = 0; u32 if_id; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - enum hws_ddr_freq freq = tm->interface_params[0].memory_freq; + enum mv_ddr_freq freq = tm->interface_params[0].memory_freq; + unsigned int *freq_tbl = mv_ddr_freq_tbl_get(); #ifdef DDR_VIEWER_TOOL if (debug_training == DEBUG_LEVEL_TRACE) { @@ -2157,7 +2028,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) /* Set to 0 after each loop to avoid illegal value may be used */ effective_cs = 0; - freq_val[DDR_FREQ_LOW_FREQ] = dfs_low_freq; + freq_tbl[MV_DDR_FREQ_LOW_FREQ] = dfs_low_freq; if (is_pll_before_init != 0) { for (if_id = 0; if_id < MAX_INTERFACE_NUM; if_id++) { @@ -2220,7 +2091,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("SET_LOW_FREQ_MASK_BIT %d\n", - freq_val[low_freq])); + freq_tbl[low_freq])); ret = ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, low_freq); if (is_reg_dump != 0) @@ -2281,7 +2152,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) training_stage = SET_MEDIUM_FREQ; DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("SET_MEDIUM_FREQ_MASK_BIT %d\n", - freq_val[medium_freq])); + freq_tbl[medium_freq])); ret = ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, medium_freq); @@ -2299,7 +2170,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) training_stage = WRITE_LEVELING; DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("WRITE_LEVELING_MASK_BIT\n")); - if ((rl_mid_freq_wa == 0) || (freq_val[medium_freq] == 533)) { + if ((rl_mid_freq_wa == 0) || (freq_tbl[medium_freq] == 533)) { ret = ddr3_tip_dynamic_write_leveling(dev_num, 0); } else { /* Use old WL */ @@ -2341,7 +2212,7 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) training_stage = READ_LEVELING; DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("READ_LEVELING_MASK_BIT\n")); - if ((rl_mid_freq_wa == 0) || (freq_val[medium_freq] == 533)) { + if ((rl_mid_freq_wa == 0) || (freq_tbl[medium_freq] == 533)) { ret = ddr3_tip_dynamic_read_leveling(dev_num, medium_freq); } else { /* Use old RL */ @@ -2417,19 +2288,13 @@ static int ddr3_tip_ddr3_training_main_flow(u32 dev_num) training_stage = SET_TARGET_FREQ; DEBUG_TRAINING_IP(DEBUG_LEVEL_INFO, ("SET_TARGET_FREQ_MASK_BIT %d\n", - freq_val[tm-> + freq_tbl[tm-> interface_params[first_active_if]. memory_freq])); ret = ddr3_tip_freq_set(dev_num, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, tm->interface_params[first_active_if]. memory_freq); -#if defined(A70X0) || defined(A80X0) - if (apn806_rev_id_get() == APN806_REV_ID_A0) { - reg_write(0x6f812c, extension_avs); - reg_write(0x6f8130, nominal_avs); - } -#endif /* #if defined(A70X0) || defined(A80X0) */ if (is_reg_dump != 0) ddr3_tip_reg_dump(dev_num); if (ret != MV_OK) { @@ -2892,3 +2757,140 @@ int hws_ddr3_cs_base_adr_calc(u32 if_id, u32 cs, u32 *cs_base_addr) return MV_OK; } + +/* TODO: consider to move to misl phy driver */ +enum { + MISL_PHY_DRV_OHM_30 = 0xf, + MISL_PHY_DRV_OHM_48 = 0xa, + MISL_PHY_DRV_OHM_80 = 0x6, + MISL_PHY_DRV_OHM_120 = 0x4 +}; + +enum { + MISL_PHY_ODT_OHM_60 = 0x8, + MISL_PHY_ODT_OHM_80 = 0x6, + MISL_PHY_ODT_OHM_120 = 0x4, + MISL_PHY_ODT_OHM_240 = 0x2 +}; + +static unsigned int mv_ddr_misl_phy_drv_calc(unsigned int cfg) +{ + unsigned int val; + + switch (cfg) { + case MV_DDR_OHM_30: + val = MISL_PHY_DRV_OHM_30; + break; + case MV_DDR_OHM_48: + val = MISL_PHY_DRV_OHM_48; + break; + case MV_DDR_OHM_80: + val = MISL_PHY_DRV_OHM_80; + break; + case MV_DDR_OHM_120: + val = MISL_PHY_DRV_OHM_120; + break; + default: + val = PARAM_UNDEFINED; + } + + return val; +} + +static unsigned int mv_ddr_misl_phy_odt_calc(unsigned int cfg) +{ + unsigned int val; + + switch (cfg) { + case MV_DDR_OHM_60: + val = MISL_PHY_ODT_OHM_60; + break; + case MV_DDR_OHM_80: + val = MISL_PHY_ODT_OHM_80; + break; + case MV_DDR_OHM_120: + val = MISL_PHY_ODT_OHM_120; + break; + case MV_DDR_OHM_240: + val = MISL_PHY_ODT_OHM_240; + break; + default: + val = PARAM_UNDEFINED; + } + + return val; +} + +unsigned int mv_ddr_misl_phy_drv_data_p_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int drv_data_p = mv_ddr_misl_phy_drv_calc(tm->edata.phy_edata.drv_data_p); + + if (drv_data_p == PARAM_UNDEFINED) + printf("error: %s: unsupported drv_data_p parameter found\n", __func__); + + return drv_data_p; +} + +unsigned int mv_ddr_misl_phy_drv_data_n_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int drv_data_n = mv_ddr_misl_phy_drv_calc(tm->edata.phy_edata.drv_data_n); + + if (drv_data_n == PARAM_UNDEFINED) + printf("error: %s: unsupported drv_data_n parameter found\n", __func__); + + return drv_data_n; +} + +unsigned int mv_ddr_misl_phy_drv_ctrl_p_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int drv_ctrl_p = mv_ddr_misl_phy_drv_calc(tm->edata.phy_edata.drv_ctrl_p); + + if (drv_ctrl_p == PARAM_UNDEFINED) + printf("error: %s: unsupported drv_ctrl_p parameter found\n", __func__); + + return drv_ctrl_p; +} + +unsigned int mv_ddr_misl_phy_drv_ctrl_n_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int drv_ctrl_n = mv_ddr_misl_phy_drv_calc(tm->edata.phy_edata.drv_ctrl_n); + + if (drv_ctrl_n == PARAM_UNDEFINED) + printf("error: %s: unsupported drv_ctrl_n parameter found\n", __func__); + + return drv_ctrl_n; +} + +unsigned int mv_ddr_misl_phy_odt_p_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int cs_num = mv_ddr_cs_num_get(); + unsigned int odt_p = PARAM_UNDEFINED; + + if (cs_num > 0 && cs_num <= MAX_CS_NUM) + odt_p = mv_ddr_misl_phy_odt_calc(tm->edata.phy_edata.odt_p[cs_num - 1]); + + if (odt_p == PARAM_UNDEFINED) + printf("error: %s: unsupported odt_p parameter found\n", __func__); + + return odt_p; +} + +unsigned int mv_ddr_misl_phy_odt_n_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int cs_num = mv_ddr_cs_num_get(); + unsigned int odt_n = PARAM_UNDEFINED; + + if (cs_num > 0 && cs_num <= MAX_CS_NUM) + odt_n = mv_ddr_misl_phy_odt_calc(tm->edata.phy_edata.odt_n[cs_num - 1]); + + if (odt_n == PARAM_UNDEFINED) + printf("error: %s: unsupported odt_n parameter found\n", __func__); + + return odt_n; +} diff --git a/drivers/ddr/marvell/a38x/ddr3_training_bist.c b/drivers/ddr/marvell/a38x/ddr3_training_bist.c index e29b1713f9a..d388a172918 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_bist.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_bist.c @@ -4,6 +4,7 @@ */ #include "ddr3_init.h" +#include "mv_ddr_regs.h" static u32 bist_offset = 32; enum hws_pattern sweep_pattern = PATTERN_KILLER_DQ0; diff --git a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c index 03e5c9fdcea..648b37ef6f7 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_centralization.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_centralization.c @@ -4,6 +4,7 @@ */ #include "ddr3_init.h" +#include "mv_ddr_regs.h" #define VALIDATE_WIN_LENGTH(e1, e2, maxsize) \ (((e2) + 1 > (e1) + (u8)MIN_WINDOW_SIZE) && \ @@ -698,6 +699,8 @@ int ddr3_tip_print_centralization_result(u32 dev_num) u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + dev_num = dev_num; + printf("Centralization Results\n"); printf("I/F0 Result[0 - success 1-fail 2 - state_2 3 - state_3] ...\n"); for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) { diff --git a/drivers/ddr/marvell/a38x/ddr3_training_db.c b/drivers/ddr/marvell/a38x/ddr3_training_db.c index c0089f67f27..111a8586c6e 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_db.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_db.c @@ -3,11 +3,16 @@ * Copyright (C) Marvell International Ltd. and its affiliates */ -#include "ddr3_init.h" +#include "ddr_ml_wrapper.h" + +#include "ddr3_training_ip_flow.h" +#include "mv_ddr_topology.h" +#include "mv_ddr_training_db.h" +#include "ddr3_training_ip_db.h" /* Device attributes structures */ -enum mv_ddr_dev_attribute ddr_dev_attributes[MAX_DEVICE_NUM][MV_ATTR_LAST]; -int ddr_dev_attr_init_done[MAX_DEVICE_NUM] = { 0 }; +enum mv_ddr_dev_attribute ddr_dev_attributes[MV_ATTR_LAST]; +int ddr_dev_attr_init_done = 0; static inline u32 pattern_table_get_killer_word16(u8 dqs, u8 index); static inline u32 pattern_table_get_sso_word(u8 sso, u8 index); @@ -20,28 +25,38 @@ static inline u32 pattern_table_get_sso_xtalk_free_word16(u8 bit, u8 index); static inline u32 pattern_table_get_isi_word(u8 index); static inline u32 pattern_table_get_isi_word16(u8 index); -/* List of allowed frequency listed in order of enum hws_ddr_freq */ -u32 freq_val[DDR_FREQ_LAST] = { - 0, /*DDR_FREQ_LOW_FREQ */ - 400, /*DDR_FREQ_400, */ - 533, /*DDR_FREQ_533, */ - 666, /*DDR_FREQ_667, */ - 800, /*DDR_FREQ_800, */ - 933, /*DDR_FREQ_933, */ - 1066, /*DDR_FREQ_1066, */ - 311, /*DDR_FREQ_311, */ - 333, /*DDR_FREQ_333, */ - 467, /*DDR_FREQ_467, */ - 850, /*DDR_FREQ_850, */ - 600, /*DDR_FREQ_600 */ - 300, /*DDR_FREQ_300 */ - 900, /*DDR_FREQ_900 */ - 360, /*DDR_FREQ_360 */ - 1000 /*DDR_FREQ_1000 */ +/* List of allowed frequency listed in order of enum mv_ddr_freq */ +static unsigned int freq_val[MV_DDR_FREQ_LAST] = { + 0, /*MV_DDR_FREQ_LOW_FREQ */ + 400, /*MV_DDR_FREQ_400, */ + 533, /*MV_DDR_FREQ_533, */ + 666, /*MV_DDR_FREQ_667, */ + 800, /*MV_DDR_FREQ_800, */ + 933, /*MV_DDR_FREQ_933, */ + 1066, /*MV_DDR_FREQ_1066, */ + 311, /*MV_DDR_FREQ_311, */ + 333, /*MV_DDR_FREQ_333, */ + 467, /*MV_DDR_FREQ_467, */ + 850, /*MV_DDR_FREQ_850, */ + 600, /*MV_DDR_FREQ_600 */ + 300, /*MV_DDR_FREQ_300 */ + 900, /*MV_DDR_FREQ_900 */ + 360, /*MV_DDR_FREQ_360 */ + 1000 /*MV_DDR_FREQ_1000 */ }; -/* Table for CL values per frequency for each speed bin index */ -struct cl_val_per_freq cas_latency_table[] = { +unsigned int *mv_ddr_freq_tbl_get(void) +{ + return &freq_val[0]; +} + +u32 mv_ddr_freq_get(enum mv_ddr_freq freq) +{ + return freq_val[freq]; +} + +/* cas latency values per frequency for each speed bin index */ +static struct mv_ddr_cl_val_per_freq cl_table[] = { /* * 400M 667M 933M 311M 467M 600M 360 * 100M 533M 800M 1066M 333M 850M 900 @@ -97,8 +112,13 @@ struct cl_val_per_freq cas_latency_table[] = { { {6, 6, 7, 9, 11, 13, 0, 6, 6, 7, 13, 9, 6, 13, 6, 13} }, }; -/* Table for CWL values per speedbin index */ -struct cl_val_per_freq cas_write_latency_table[] = { +u32 mv_ddr_cl_val_get(u32 index, u32 freq) +{ + return cl_table[index].cl_val[freq]; +} + +/* cas write latency values per frequency for each speed bin index */ +static struct mv_ddr_cl_val_per_freq cwl_table[] = { /* * 400M 667M 933M 311M 467M 600M 360 * 100M 533M 800M 1066M 333M 850M 900 @@ -154,6 +174,11 @@ struct cl_val_per_freq cas_write_latency_table[] = { { {5, 5, 6, 7, 8, 9, 0, 5, 5, 6, 9, 7, 5, 9, 5, 9} }, }; +u32 mv_ddr_cwl_val_get(u32 index, u32 freq) +{ + return cwl_table[index].cl_val[freq]; +} + u8 twr_mask_table[] = { 10, 10, @@ -213,18 +238,23 @@ u8 cwl_mask_table[] = { }; /* RFC values (in ns) */ -u16 rfc_table[] = { - 90, /* 512M */ - 110, /* 1G */ - 160, /* 2G */ - 260, /* 4G */ - 350, /* 8G */ - 0, /* TODO: placeholder for 16-Mbit dev width */ - 0, /* TODO: placeholder for 32-Mbit dev width */ - 0, /* TODO: placeholder for 12-Mbit dev width */ - 0 /* TODO: placeholder for 24-Mbit dev width */ +static unsigned int rfc_table[] = { + 90, /* 512M */ + 110, /* 1G */ + 160, /* 2G */ + 260, /* 4G */ + 350, /* 8G */ + 0, /* TODO: placeholder for 16-Mbit dev width */ + 0, /* TODO: placeholder for 32-Mbit dev width */ + 0, /* TODO: placeholder for 12-Mbit dev width */ + 0 /* TODO: placeholder for 24-Mbit dev width */ }; +u32 mv_ddr_rfc_get(u32 mem) +{ + return rfc_table[mem]; +} + u32 speed_bin_table_t_rc[] = { 50000, 52500, @@ -358,8 +388,29 @@ static u8 pattern_vref_pattern_table_map[] = { 0xfe }; +static struct mv_ddr_page_element page_tbl[] = { + /* 8-bit, 16-bit page size */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 512M */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 1G */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 2G */ + {MV_DDR_PAGE_SIZE_1K, MV_DDR_PAGE_SIZE_2K}, /* 4G */ + {MV_DDR_PAGE_SIZE_2K, MV_DDR_PAGE_SIZE_2K}, /* 8G */ + {0, 0}, /* TODO: placeholder for 16-Mbit die capacity */ + {0, 0}, /* TODO: placeholder for 32-Mbit die capacity */ + {0, 0}, /* TODO: placeholder for 12-Mbit die capacity */ + {0, 0} /* TODO: placeholder for 24-Mbit die capacity */ +}; + +u32 mv_ddr_page_size_get(enum mv_ddr_dev_width bus_width, enum mv_ddr_die_capacity mem_size) +{ + if (bus_width == MV_DDR_DEV_WIDTH_8BIT) + return page_tbl[mem_size].page_size_8bit; + else + return page_tbl[mem_size].page_size_16bit; +} + /* Return speed Bin value for selected index and t* element */ -u32 speed_bin_table(u8 index, enum speed_bin_table_elements element) +unsigned int mv_ddr_speed_bin_timing_get(enum mv_ddr_speed_bin index, enum mv_ddr_speed_bin_timing element) { u32 result = 0; @@ -384,19 +435,19 @@ u32 speed_bin_table(u8 index, enum speed_bin_table_elements element) result = speed_bin_table_t_rc[index]; break; case SPEED_BIN_TRRD1K: - if (index < SPEED_BIN_DDR_800E) + if (index <= SPEED_BIN_DDR_800E) result = 10000; - else if (index < SPEED_BIN_DDR_1066G) + else if (index <= SPEED_BIN_DDR_1066G) result = 7500; - else if (index < SPEED_BIN_DDR_1600K) + else if (index <= SPEED_BIN_DDR_1600K) result = 6000; else result = 5000; break; case SPEED_BIN_TRRD2K: - if (index < SPEED_BIN_DDR_1066G) + if (index <= SPEED_BIN_DDR_1066G) result = 10000; - else if (index < SPEED_BIN_DDR_1600K) + else if (index <= SPEED_BIN_DDR_1600K) result = 7500; else result = 6000; @@ -410,23 +461,23 @@ u32 speed_bin_table(u8 index, enum speed_bin_table_elements element) result = 5000; break; case SPEED_BIN_TFAW1K: - if (index < SPEED_BIN_DDR_800E) + if (index <= SPEED_BIN_DDR_800E) result = 40000; - else if (index < SPEED_BIN_DDR_1066G) + else if (index <= SPEED_BIN_DDR_1066G) result = 37500; - else if (index < SPEED_BIN_DDR_1600K) + else if (index <= SPEED_BIN_DDR_1600K) result = 30000; - else if (index < SPEED_BIN_DDR_1866M) + else if (index <= SPEED_BIN_DDR_1866M) result = 27000; else result = 25000; break; case SPEED_BIN_TFAW2K: - if (index < SPEED_BIN_DDR_1066G) + if (index <= SPEED_BIN_DDR_1066G) result = 50000; - else if (index < SPEED_BIN_DDR_1333J) + else if (index <= SPEED_BIN_DDR_1333J) result = 45000; - else if (index < SPEED_BIN_DDR_1600K) + else if (index <= SPEED_BIN_DDR_1600K) result = 40000; else result = 35000; @@ -446,6 +497,9 @@ u32 speed_bin_table(u8 index, enum speed_bin_table_elements element) case SPEED_BIN_TXPDLL: result = 24000; break; + case SPEED_BIN_TXSDLL: + result = 512; + break; default: break; } @@ -608,7 +662,7 @@ static inline u32 pattern_table_get_static_pbs_word(u8 index) u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) { - u32 pattern; + u32 pattern = 0; struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); if (DDR3_IS_16BIT_DRAM_MODE(tm->bus_act_mask) == 0) { @@ -696,8 +750,8 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) pattern = pattern_table_get_isi_word(index); break; default: - DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("Error: %s: pattern type [%d] not supported\n", - __func__, (int)type)); + printf("error: %s: unsupported pattern type [%d] found\n", + __func__, (int)type); pattern = 0; break; } @@ -779,8 +833,8 @@ u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index) pattern = pattern_table_get_isi_word16(index); break; default: - DEBUG_TRAINING_IP(DEBUG_LEVEL_ERROR, ("Error: %s: pattern type [%d] not supported\n", - __func__, (int)type)); + printf("error: %s: unsupported pattern type [%d] found\n", + __func__, (int)type); pattern = 0; break; } @@ -795,23 +849,23 @@ void ddr3_tip_dev_attr_init(u32 dev_num) u32 attr_id; for (attr_id = 0; attr_id < MV_ATTR_LAST; attr_id++) - ddr_dev_attributes[dev_num][attr_id] = 0xFF; + ddr_dev_attributes[attr_id] = 0xFF; - ddr_dev_attr_init_done[dev_num] = 1; + ddr_dev_attr_init_done = 1; } u32 ddr3_tip_dev_attr_get(u32 dev_num, enum mv_ddr_dev_attribute attr_id) { - if (ddr_dev_attr_init_done[dev_num] == 0) + if (ddr_dev_attr_init_done == 0) ddr3_tip_dev_attr_init(dev_num); - return ddr_dev_attributes[dev_num][attr_id]; + return ddr_dev_attributes[attr_id]; } void ddr3_tip_dev_attr_set(u32 dev_num, enum mv_ddr_dev_attribute attr_id, u32 value) { - if (ddr_dev_attr_init_done[dev_num] == 0) + if (ddr_dev_attr_init_done == 0) ddr3_tip_dev_attr_init(dev_num); - ddr_dev_attributes[dev_num][attr_id] = value; + ddr_dev_attributes[attr_id] = value; } diff --git a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c index 6b8aae83d75..db0f8ad7fb5 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c @@ -4,6 +4,7 @@ */ #include "ddr3_init.h" +#include "mv_ddr_regs.h" #define VREF_INITIAL_STEP 3 #define VREF_SECOND_STEP 1 diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip.h b/drivers/ddr/marvell/a38x/ddr3_training_ip.h index 531103c1abd..056c21497c8 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip.h @@ -6,12 +6,8 @@ #ifndef _DDR3_TRAINING_IP_H_ #define _DDR3_TRAINING_IP_H_ -#include "ddr3_training_ip_def.h" #include "ddr_topology_def.h" -#include "ddr_training_ip_db.h" -#define MAX_CS_NUM 4 -#define MAX_TOTAL_BUS_NUM (MAX_INTERFACE_NUM * MAX_BUS_NUM) #define TIP_ENG_LOCK 0x02000000 #define TIP_TX_DLL_RANGE_MAX 64 @@ -112,40 +108,11 @@ struct pattern_info { u8 pattern_len; }; -/* CL value for each frequency */ -struct cl_val_per_freq { - u8 cl_val[DDR_FREQ_LAST]; -}; - struct cs_element { u8 cs_num; u8 num_of_cs; }; -struct mode_info { - /* 32 bits representing MRS bits */ - u32 reg_mr0[MAX_INTERFACE_NUM]; - u32 reg_mr1[MAX_INTERFACE_NUM]; - u32 reg_mr2[MAX_INTERFACE_NUM]; - u32 reg_m_r3[MAX_INTERFACE_NUM]; - /* - * Each element in array represent read_data_sample register delay for - * a specific interface. - * Each register, 4 bits[0+CS*8 to 4+CS*8] represent Number of DDR - * cycles from read command until data is ready to be fetched from - * the PHY, when accessing CS. - */ - u32 read_data_sample[MAX_INTERFACE_NUM]; - /* - * Each element in array represent read_data_sample register delay for - * a specific interface. - * Each register, 4 bits[0+CS*8 to 4+CS*8] represent the total delay - * from read command until opening the read mask, when accessing CS. - * This field defines the delay in DDR cycles granularity. - */ - u32 read_data_ready[MAX_INTERFACE_NUM]; -}; - struct hws_tip_freq_config_info { u8 is_supported; u8 bw_per_freq; @@ -173,12 +140,7 @@ int hws_ddr3_tip_init_controller(u32 dev_num, int hws_ddr3_tip_load_topology_map(u32 dev_num, struct mv_ddr_topology_map *topology); int hws_ddr3_tip_run_alg(u32 dev_num, enum hws_algo_type algo_type); -int hws_ddr3_tip_mode_read(u32 dev_num, struct mode_info *mode_info); -int hws_ddr3_tip_read_training_result(u32 dev_num, - enum hws_result result[MAX_STAGE_LIMIT][MAX_INTERFACE_NUM]); int ddr3_tip_is_pup_lock(u32 *pup_buf, enum hws_training_result read_mode); u8 ddr3_tip_get_buf_min(u8 *buf_ptr); u8 ddr3_tip_get_buf_max(u8 *buf_ptr); -uint64_t mv_ddr_get_memory_size_per_cs_in_bits(void); -uint64_t mv_ddr_get_total_memory_size_in_bits(void); #endif /* _DDR3_TRAINING_IP_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h index 2318ceba292..2a68669f36c 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_def.h @@ -75,32 +75,6 @@ #define GET_RESULT_STATE(res) (res) #define SET_RESULT_STATE(res, state) (res = state) -#define _1K 0x00000400 -#define _4K 0x00001000 -#define _8K 0x00002000 -#define _16K 0x00004000 -#define _32K 0x00008000 -#define _64K 0x00010000 -#define _128K 0x00020000 -#define _256K 0x00040000 -#define _512K 0x00080000 - -#define _1M 0x00100000 -#define _2M 0x00200000 -#define _4M 0x00400000 -#define _8M 0x00800000 -#define _16M 0x01000000 -#define _32M 0x02000000 -#define _64M 0x04000000 -#define _128M 0x08000000 -#define _256M 0x10000000 -#define _512M 0x20000000 - -#define _1G 0x40000000 -#define _2G 0x80000000 -#define _4G 0x100000000 -#define _8G 0x200000000 - #define ADDR_SIZE_512MB 0x04000000 #define ADDR_SIZE_1GB 0x08000000 #define ADDR_SIZE_2GB 0x10000000 @@ -126,11 +100,6 @@ enum hws_search_dir { HWS_SEARCH_DIR_LIMIT }; -enum hws_page_size { - PAGE_SIZE_1K, - PAGE_SIZE_2K -}; - enum hws_operation { OPERATION_READ = 0, OPERATION_WRITE = 1 diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c index 334c2906fdb..74417d61b4c 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.c @@ -4,6 +4,8 @@ */ #include "ddr3_init.h" +#include "mv_ddr_regs.h" +#include "ddr_training_ip_db.h" #define PATTERN_1 0x55555555 #define PATTERN_2 0xaaaaaaaa diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h index 8fbcff50bb2..2d40e68db86 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h @@ -8,6 +8,7 @@ #include "ddr3_training_ip_def.h" #include "ddr3_training_ip_flow.h" +#include "ddr3_training_ip_pbs.h" #define EDGE_1 0 #define EDGE_2 1 diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h index 6a9ef35f643..ab152cb455e 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h @@ -7,71 +7,17 @@ #define _DDR3_TRAINING_IP_FLOW_H_ #include "ddr3_training_ip.h" -#include "ddr3_training_ip_pbs.h" -#include "mv_ddr_regs.h" +#include "ddr3_training_ip_db.h" #define KILLER_PATTERN_LENGTH 32 #define EXT_ACCESS_BURST_LENGTH 8 -#define IS_ACTIVE(mask, id) \ - ((mask) & (1 << (id))) - -#define VALIDATE_ACTIVE(mask, id) \ - { \ - if (IS_ACTIVE(mask, id) == 0) \ - continue; \ - } - -#define IS_IF_ACTIVE(if_mask, if_id) \ - ((if_mask) & (1 << (if_id))) - -#define VALIDATE_IF_ACTIVE(mask, id) \ - { \ - if (IS_IF_ACTIVE(mask, id) == 0) \ - continue; \ - } - -#define IS_BUS_ACTIVE(if_mask , if_id) \ - (((if_mask) >> (if_id)) & 1) - -#define VALIDATE_BUS_ACTIVE(mask, id) \ - { \ - if (IS_BUS_ACTIVE(mask, id) == 0) \ - continue; \ - } - -#define DDR3_IS_ECC_PUP3_MODE(if_mask) \ - (((if_mask) == BUS_MASK_16BIT_ECC_PUP3) ? 1 : 0) - -#define DDR3_IS_ECC_PUP4_MODE(if_mask) \ - ((if_mask == BUS_MASK_32BIT_ECC || if_mask == BUS_MASK_16BIT_ECC) ? 1 : 0) - -#define DDR3_IS_16BIT_DRAM_MODE(mask) \ - ((mask == BUS_MASK_16BIT || mask == BUS_MASK_16BIT_ECC || mask == BUS_MASK_16BIT_ECC_PUP3) ? 1 : 0) - -#define DDR3_IS_ECC_PUP8_MODE(if_mask) \ - ((if_mask == MV_DDR_32BIT_ECC_PUP8_BUS_MASK || if_mask == MV_DDR_64BIT_ECC_PUP8_BUS_MASK) ? 1 : 0) - -#define MV_DDR_IS_64BIT_DRAM_MODE(mask) \ - ((((mask) & MV_DDR_64BIT_BUS_MASK) == MV_DDR_64BIT_BUS_MASK) || \ - (((mask) & MV_DDR_64BIT_ECC_PUP8_BUS_MASK) == MV_DDR_64BIT_ECC_PUP8_BUS_MASK) ? 1 : 0) - -#define MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(mask, octets_per_if_num/* FIXME: get from ATF */) \ - ((octets_per_if_num == 9/* FIXME: get from ATF */) && \ - ((mask == BUS_MASK_32BIT) || \ - (mask == MV_DDR_32BIT_ECC_PUP8_BUS_MASK)) ? 1 : 0) - -#define MV_DDR_IS_HALF_BUS_DRAM_MODE(mask, octets_per_if_num/* FIXME: get from ATF */) \ - (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(mask, octets_per_if_num) || DDR3_IS_16BIT_DRAM_MODE(mask)) - #define ECC_READ_BUS_0 0 #define ECC_PHY_ACCESS_3 3 #define ECC_PHY_ACCESS_4 4 #define ECC_PHY_ACCESS_8 8 -#define MEGA 1000000 #define BUS_WIDTH_IN_BITS 8 #define MAX_POLLING_ITERATIONS 1000000 -#define NUM_OF_CS 4 #define ADLL_LENGTH 32 #define GP_RSVD0_REG 0x182e0 @@ -92,8 +38,6 @@ */ /* nsec */ -#define TREFI_LOW 7800 -#define TREFI_HIGH 3900 #define AUTO_ZQC_TIMING 15384 enum mr_number { @@ -114,20 +58,11 @@ struct write_supp_result { int is_pup_fail; }; -struct page_element { - enum hws_page_size page_size_8bit; - /* page size in 8 bits bus width */ - enum hws_page_size page_size_16bit; - /* page size in 16 bits bus width */ - u32 ui_page_mask; - /* Mask used in register */ -}; - int ddr3_tip_write_leveling_static_config(u32 dev_num, u32 if_id, - enum hws_ddr_freq frequency, + enum mv_ddr_freq frequency, u32 *round_trip_delay_arr); int ddr3_tip_read_leveling_static_config(u32 dev_num, u32 if_id, - enum hws_ddr_freq frequency, + enum mv_ddr_freq frequency, u32 *total_round_trip_delay_arr); int ddr3_tip_if_write(u32 dev_num, enum hws_access_type interface_access, u32 if_id, u32 reg_addr, u32 data_value, u32 mask); @@ -149,7 +84,7 @@ int ddr3_tip_bus_write(u32 dev_num, enum hws_access_type e_interface_access, enum hws_ddr_phy e_phy_type, u32 reg_addr, u32 data_value); int ddr3_tip_freq_set(u32 dev_num, enum hws_access_type e_access, u32 if_id, - enum hws_ddr_freq memory_freq); + enum mv_ddr_freq memory_freq); int ddr3_tip_adjust_dqs(u32 dev_num); int ddr3_tip_init_controller(u32 dev_num); int ddr3_tip_ext_read(u32 dev_num, u32 if_id, u32 reg_addr, @@ -174,22 +109,12 @@ int ddr3_tip_configure_odpg(u32 dev_num, enum hws_access_type access_type, u32 tx_burst_size, u32 rx_phases, u32 delay_between_burst, u32 rd_mode, u32 cs_num, u32 addr_stress_jump, u32 single_pattern); -int ddr3_tip_set_atr(u32 dev_num, u32 flag_id, u32 value); int ddr3_tip_write_mrs_cmd(u32 dev_num, u32 *cs_mask_arr, enum mr_number mr_num, u32 data, u32 mask); int ddr3_tip_write_cs_result(u32 dev_num, u32 offset); -int ddr3_tip_get_first_active_if(u8 dev_num, u32 interface_mask, u32 *if_id); int ddr3_tip_reset_fifo_ptr(u32 dev_num); -int ddr3_tip_read_pup_value(u32 dev_num, - u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], - int reg_addr, u32 mask); -int ddr3_tip_read_adll_value(u32 dev_num, - u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], - u32 reg_addr, u32 mask); -int ddr3_tip_write_adll_value(u32 dev_num, - u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], - u32 reg_addr); -int ddr3_tip_tune_training_params(u32 dev_num, - struct tune_train_params *params); -struct page_element *mv_ddr_page_tbl_get(void); +int ddr3_tip_read_pup_value(u32 dev_num, u32 pup_values[], int reg_addr, u32 mask); +int ddr3_tip_read_adll_value(u32 dev_num, u32 pup_values[], u32 reg_addr, u32 mask); +int ddr3_tip_write_adll_value(u32 dev_num, u32 pup_values[], u32 reg_addr); +int ddr3_tip_tune_training_params(u32 dev_num, struct tune_train_params *params); #endif /* _DDR3_TRAINING_IP_FLOW_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h b/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h index f614d688c91..2df592e1b02 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_ip_prv_if.h @@ -28,15 +28,15 @@ typedef int (*HWS_TIP_DUNIT_REG_WRITE_FUNC_PTR)( u8 dev_num, enum hws_access_type interface_access, u32 if_id, u32 offset, u32 data, u32 mask); typedef int (*HWS_TIP_GET_FREQ_CONFIG_INFO)( - u8 dev_num, enum hws_ddr_freq freq, + u8 dev_num, enum mv_ddr_freq freq, struct hws_tip_freq_config_info *freq_config_info); typedef int (*HWS_TIP_GET_DEVICE_INFO)( u8 dev_num, struct ddr3_device_info *info_ptr); typedef int (*HWS_GET_CS_CONFIG_FUNC_PTR)( u8 dev_num, u32 cs_mask, struct hws_cs_config_info *cs_info); typedef int (*HWS_SET_FREQ_DIVIDER_FUNC_PTR)( - u8 dev_num, u32 if_id, enum hws_ddr_freq freq); -typedef int (*HWS_GET_INIT_FREQ)(u8 dev_num, enum hws_ddr_freq *freq); + u8 dev_num, u32 if_id, enum mv_ddr_freq freq); +typedef int (*HWS_GET_INIT_FREQ)(u8 dev_num, enum mv_ddr_freq *freq); typedef int (*HWS_TRAINING_IP_IF_WRITE_FUNC_PTR)( u32 dev_num, enum hws_access_type access_type, u32 dunit_id, u32 reg_addr, u32 data, u32 mask); @@ -54,7 +54,7 @@ typedef int (*HWS_TRAINING_IP_ALGO_RUN_FUNC_PTR)( u32 dev_num, enum hws_algo_type algo_type); typedef int (*HWS_TRAINING_IP_SET_FREQ_FUNC_PTR)( u32 dev_num, enum hws_access_type access_type, u32 if_id, - enum hws_ddr_freq frequency); + enum mv_ddr_freq frequency); typedef int (*HWS_TRAINING_IP_INIT_CONTROLLER_FUNC_PTR)( u32 dev_num, struct init_cntr_param *init_cntr_prm); typedef int (*HWS_TRAINING_IP_PBS_RX_FUNC_PTR)(u32 dev_num); @@ -64,7 +64,7 @@ typedef int (*HWS_TRAINING_IP_SELECT_CONTROLLER_FUNC_PTR)( typedef int (*HWS_TRAINING_IP_TOPOLOGY_MAP_LOAD_FUNC_PTR)( u32 dev_num, struct mv_ddr_topology_map *tm); typedef int (*HWS_TRAINING_IP_STATIC_CONFIG_FUNC_PTR)( - u32 dev_num, enum hws_ddr_freq frequency, + u32 dev_num, enum mv_ddr_freq frequency, enum hws_static_config_type static_config_type, u32 if_id); typedef int (*HWS_TRAINING_IP_EXTERNAL_READ_PTR)( u32 dev_num, u32 if_id, u32 ddr_addr, u32 num_bursts, u32 *data); diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c index 6248ffc3fb3..7f7df6794a9 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.c @@ -4,6 +4,9 @@ */ #include "ddr3_init.h" +#include "mv_ddr_training_db.h" +#include "ddr_training_ip_db.h" +#include "mv_ddr_regs.h" #define WL_ITERATION_NUM 10 @@ -24,33 +27,6 @@ static int ddr3_tip_wl_supp_align_phase_shift(u32 dev_num, u32 if_id, static int ddr3_tip_xsb_compare_test(u32 dev_num, u32 if_id, u32 bus_id, u32 edge_offset); -u32 ddr3_tip_max_cs_get(u32 dev_num) -{ - u32 c_cs, if_id, bus_id; - static u32 max_cs; - struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); - - if (!max_cs) { - CHECK_STATUS(ddr3_tip_get_first_active_if((u8)dev_num, - tm->if_act_mask, - &if_id)); - for (bus_id = 0; bus_id < octets_per_if_num; bus_id++) { - VALIDATE_BUS_ACTIVE(tm->bus_act_mask, bus_id); - break; - } - - for (c_cs = 0; c_cs < NUM_OF_CS; c_cs++) { - VALIDATE_ACTIVE(tm-> - interface_params[if_id].as_bus_params[bus_id]. - cs_bitmask, c_cs); - max_cs++; - } - } - - return max_cs; -} - enum { PASS, FAIL @@ -61,20 +37,20 @@ Dynamic read leveling int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq) { u32 data, mask; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); u32 bus_num, if_id, cl_val; - enum hws_speed_bin speed_bin_index; + enum mv_ddr_speed_bin speed_bin_index; /* save current CS value */ u32 cs_enable_reg_val[MAX_INTERFACE_NUM] = { 0 }; int is_any_pup_fail = 0; u32 data_read[MAX_INTERFACE_NUM + 1] = { 0 }; - u8 rl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; + u8 rl_values[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM]; struct pattern_info *pattern_table = ddr3_tip_get_pattern_table(); u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - for (effective_cs = 0; effective_cs < NUM_OF_CS; effective_cs++) + for (effective_cs = 0; effective_cs < MAX_CS_NUM; effective_cs++) for (bus_num = 0; bus_num < MAX_BUS_NUM; bus_num++) for (if_id = 0; if_id <= MAX_INTERFACE_NUM - 1; if_id++) rl_values[effective_cs][bus_num][if_id] = 0; @@ -143,8 +119,7 @@ int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq) VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); speed_bin_index = tm->interface_params[if_id].speed_bin_index; - cl_val = - cas_latency_table[speed_bin_index].cl_val[freq]; + cl_val = mv_ddr_cl_val_get(speed_bin_index, freq); data = (cl_val << 17) | (0x3 << 25); mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); CHECK_STATUS(ddr3_tip_if_write @@ -340,7 +315,7 @@ int ddr3_tip_dynamic_read_leveling(u32 dev_num, u32 freq) int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num) { u32 c_cs, if_id, cs_mask = 0; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); /* @@ -381,7 +356,7 @@ int ddr3_tip_legacy_dynamic_write_leveling(u32 dev_num) int ddr3_tip_legacy_dynamic_read_leveling(u32 dev_num) { u32 c_cs, if_id, cs_mask = 0; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); /* @@ -426,7 +401,7 @@ int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 freq) u32 curr_numb, curr_min_delay; int adll_array[3] = { 0, -0xa, 0x14 }; u32 phyreg3_arr[MAX_INTERFACE_NUM][MAX_BUS_NUM]; - enum hws_speed_bin speed_bin_index; + enum mv_ddr_speed_bin speed_bin_index; int is_any_pup_fail = 0; int break_loop = 0; u32 cs_enable_reg_val[MAX_INTERFACE_NUM]; /* save current CS value */ @@ -516,8 +491,7 @@ int ddr3_tip_dynamic_per_bit_read_leveling(u32 dev_num, u32 freq) VALIDATE_IF_ACTIVE(tm->if_act_mask, if_id); speed_bin_index = tm->interface_params[if_id].speed_bin_index; - cl_val = - cas_latency_table[speed_bin_index].cl_val[freq]; + cl_val = mv_ddr_cl_val_get(speed_bin_index, freq); data = (cl_val << 17) | (0x3 << 25); mask = (0xff << 9) | (0x1f << 17) | (0x3 << 25); CHECK_STATUS(ddr3_tip_if_write @@ -839,10 +813,10 @@ int ddr3_tip_dynamic_write_leveling(u32 dev_num, int phase_remove) u32 res_values[MAX_INTERFACE_NUM * MAX_BUS_NUM] = { 0 }; u32 test_res = 0; /* 0 - success for all pup */ u32 data_read[MAX_INTERFACE_NUM]; - u8 wl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM]; + u8 wl_values[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM]; u16 *mask_results_pup_reg_map = ddr3_tip_get_mask_results_pup_reg_map(); u32 cs_mask0[MAX_INTERFACE_NUM] = { 0 }; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); u32 octets_per_if_num = ddr3_tip_dev_attr_get(dev_num, MV_ATTR_OCTET_PER_INTERFACE); struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); @@ -1694,9 +1668,11 @@ enum rl_dqs_burst_state { RL_INSIDE, RL_BEHIND }; + + int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) { - enum rl_dqs_burst_state rl_state[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; + enum rl_dqs_burst_state rl_state[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; enum hws_ddr_phy subphy_type = DDR_PHY_DATA; struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); int cl_val = tm->interface_params[0].cas_l; @@ -1707,17 +1683,18 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) int init_pass_lock_num; int phase_delta; int min_phase, max_phase; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); - u32 rl_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; - u32 rl_min_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; - u32 rl_max_values[NUM_OF_CS][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; - u32 rl_val, rl_min_val[NUM_OF_CS], rl_max_val[NUM_OF_CS]; + unsigned int max_cs = mv_ddr_cs_num_get(); + u32 rl_values[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; + u32 rl_min_values[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; + u32 rl_max_values[MAX_CS_NUM][MAX_BUS_NUM][MAX_INTERFACE_NUM] = { { {0} } }; + u32 rl_val, rl_min_val[MAX_CS_NUM], rl_max_val[MAX_CS_NUM]; u32 reg_val_low, reg_val_high; - u32 reg_val, reg_mask; + u32 reg_val, reg_mask; uintptr_t test_addr = TEST_ADDR; + /* initialization */ - if (ddr3_if_ecc_enabled()) { + if (mv_ddr_is_ecc_ena()) { ddr3_tip_if_read(dev_num, ACCESS_TYPE_UNICAST, if_id, TRAINING_SW_2_REG, ®_val, MASK_ALL_BITS); reg_mask = (TRAINING_ECC_MUX_MASK << TRAINING_ECC_MUX_OFFS) | @@ -1753,6 +1730,7 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) /* search for dqs edges per subphy */ if_id = 0; for (effective_cs = 0; effective_cs < max_cs; effective_cs++) { + pass_lock_num = init_pass_lock_num; ddr3_tip_if_write(0, ACCESS_TYPE_MULTICAST, PARAM_NOT_CARE, ODPG_DATA_CTRL_REG, effective_cs << ODPG_DATA_CS_OFFS, @@ -1972,6 +1950,7 @@ int mv_ddr_rl_dqs_burst(u32 dev_num, u32 if_id, u32 freq) CHECK_STATUS(ddr3_tip_write_additional_odt_setting(dev_num, if_id)); } + /* reset read fifo assertion */ ddr3_tip_if_write(dev_num, ACCESS_TYPE_MULTICAST, if_id, SDRAM_CFG_REG, DATA_PUP_RD_RESET_ENA << DATA_PUP_RD_RESET_OFFS, diff --git a/drivers/ddr/marvell/a38x/ddr3_training_leveling.h b/drivers/ddr/marvell/a38x/ddr3_training_leveling.h index 96d945a33d6..6719fb83f51 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_leveling.h +++ b/drivers/ddr/marvell/a38x/ddr3_training_leveling.h @@ -11,6 +11,5 @@ int ddr3_tip_print_wl_supp_result(u32 dev_num); int ddr3_tip_calc_cs_mask(u32 dev_num, u32 if_id, u32 effective_cs, u32 *cs_mask); -u32 ddr3_tip_max_cs_get(u32 dev_num); #endif /* _DDR3_TRAINING_LEVELING_H_ */ diff --git a/drivers/ddr/marvell/a38x/ddr3_training_pbs.c b/drivers/ddr/marvell/a38x/ddr3_training_pbs.c index 0511026afbe..b7dfebd93cc 100644 --- a/drivers/ddr/marvell/a38x/ddr3_training_pbs.c +++ b/drivers/ddr/marvell/a38x/ddr3_training_pbs.c @@ -4,6 +4,9 @@ */ #include "ddr3_init.h" +#include "mv_ddr_training_db.h" +#include "mv_ddr_common.h" +#include "mv_ddr_regs.h" #define TYPICAL_PBS_VALUE 12 @@ -33,7 +36,7 @@ static u8 pup_state[MAX_INTERFACE_NUM][MAX_BUS_NUM]; int ddr3_tip_pbs(u32 dev_num, enum pbs_dir pbs_mode) { u32 res0[MAX_INTERFACE_NUM]; - int adll_tap = MEGA / freq_val[medium_freq] / 64; + int adll_tap = MEGA / mv_ddr_freq_get(medium_freq) / 64; int pad_num = 0; enum hws_search_dir search_dir = (pbs_mode == PBS_RX_MODE) ? HWS_HIGH2LOW : HWS_LOW2HIGH; @@ -921,7 +924,7 @@ int ddr3_tip_pbs_tx(u32 uidev_num) int ddr3_tip_print_all_pbs_result(u32 dev_num) { u32 curr_cs; - u32 max_cs = ddr3_tip_max_cs_get(dev_num); + unsigned int max_cs = mv_ddr_cs_num_get(); for (curr_cs = 0; curr_cs < max_cs; curr_cs++) { ddr3_tip_print_pbs_result(dev_num, curr_cs, PBS_RX_MODE); diff --git a/drivers/ddr/marvell/a38x/ddr_topology_def.h b/drivers/ddr/marvell/a38x/ddr_topology_def.h index 812224909ae..e6fe8a04289 100644 --- a/drivers/ddr/marvell/a38x/ddr_topology_def.h +++ b/drivers/ddr/marvell/a38x/ddr_topology_def.h @@ -7,16 +7,13 @@ #define _DDR_TOPOLOGY_DEF_H #include "ddr3_training_ip_def.h" -#include "ddr3_topology_def.h" - -#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) -#include "mv_ddr_plat.h" -#endif - #include "mv_ddr_topology.h" #include "mv_ddr_spd.h" #include "ddr3_logging_def.h" +#define MV_DDR_MAX_BUS_NUM 9 +#define MV_DDR_MAX_IFACE_NUM 1 + struct bus_params { /* Chip Select (CS) bitmask (bits 0-CS0, bit 1- CS1 ...) */ u8 cs_bitmask; @@ -36,10 +33,10 @@ struct bus_params { struct if_params { /* bus configuration */ - struct bus_params as_bus_params[MAX_BUS_NUM]; + struct bus_params as_bus_params[MV_DDR_MAX_BUS_NUM]; /* Speed Bin Table */ - enum hws_speed_bin speed_bin_index; + enum mv_ddr_speed_bin speed_bin_index; /* sdram device width */ enum mv_ddr_dev_width bus_width; @@ -48,7 +45,7 @@ struct if_params { enum mv_ddr_die_capacity memory_size; /* The DDR frequency for each interfaces */ - enum hws_ddr_freq memory_freq; + enum mv_ddr_freq memory_freq; /* * delay CAS Write Latency @@ -69,6 +66,37 @@ struct if_params { enum mv_ddr_timing timing; }; +/* memory electrical configuration */ +struct mv_ddr_mem_edata { + enum mv_ddr_rtt_nom_park_evalue rtt_nom; + enum mv_ddr_rtt_nom_park_evalue rtt_park[MAX_CS_NUM]; + enum mv_ddr_rtt_wr_evalue rtt_wr[MAX_CS_NUM]; + enum mv_ddr_dic_evalue dic; +}; + +/* phy electrical configuration */ +struct mv_ddr_phy_edata { + enum mv_ddr_ohm_evalue drv_data_p; + enum mv_ddr_ohm_evalue drv_data_n; + enum mv_ddr_ohm_evalue drv_ctrl_p; + enum mv_ddr_ohm_evalue drv_ctrl_n; + enum mv_ddr_ohm_evalue odt_p[MAX_CS_NUM]; + enum mv_ddr_ohm_evalue odt_n[MAX_CS_NUM]; +}; + +/* mac electrical configuration */ +struct mv_ddr_mac_edata { + enum mv_ddr_odt_cfg_evalue odt_cfg_pat; + enum mv_ddr_odt_cfg_evalue odt_cfg_wr; + enum mv_ddr_odt_cfg_evalue odt_cfg_rd; +}; + +struct mv_ddr_edata { + struct mv_ddr_mem_edata mem_edata; + struct mv_ddr_phy_edata phy_edata; + struct mv_ddr_mac_edata mac_edata; +}; + struct mv_ddr_topology_map { /* debug level configuration */ enum mv_ddr_debug_level debug_level; @@ -77,7 +105,7 @@ struct mv_ddr_topology_map { u8 if_act_mask; /* Controller configuration per interface */ - struct if_params interface_params[MAX_INTERFACE_NUM]; + struct if_params interface_params[MV_DDR_MAX_IFACE_NUM]; /* Bit mask for active buses */ u16 bus_act_mask; @@ -90,8 +118,67 @@ struct mv_ddr_topology_map { /* timing parameters */ unsigned int timing_data[MV_DDR_TDATA_LAST]; + + /* electrical configuration */ + struct mv_ddr_edata edata; + + /* electrical parameters */ + unsigned int electrical_data[MV_DDR_EDATA_LAST]; +}; + +enum mv_ddr_iface_mode { + MV_DDR_RAR_ENA, + MV_DDR_RAR_DIS, }; +enum mv_ddr_iface_state { + MV_DDR_IFACE_NRDY, /* not ready */ + MV_DDR_IFACE_INIT, /* init'd */ + MV_DDR_IFACE_RDY, /* ready */ + MV_DDR_IFACE_DNE /* does not exist */ +}; + +enum mv_ddr_validation { + MV_DDR_VAL_DIS, + MV_DDR_VAL_RX, + MV_DDR_VAL_TX, + MV_DDR_VAL_RX_TX +}; + +struct mv_ddr_iface { + /* base addr of ap ddr interface belongs to */ + unsigned int ap_base; + + /* ddr interface id */ + unsigned int id; + + /* ddr interface state */ + enum mv_ddr_iface_state state; + + /* ddr interface mode (rar enabled/disabled) */ + enum mv_ddr_iface_mode iface_mode; + + /* ddr interface base address */ + unsigned long long iface_base_addr; + + /* ddr interface size - ddr flow will update this parameter */ + unsigned long long iface_byte_size; + + /* ddr i2c spd data address */ + unsigned int spd_data_addr; + + /* ddr i2c spd page 0 select address */ + unsigned int spd_page_sel_addr; + + /* ddr interface validation mode */ + enum mv_ddr_validation validation; + + /* ddr interface topology map */ + struct mv_ddr_topology_map tm; +}; + +struct mv_ddr_iface *mv_ddr_iface_get(void); + /* DDR3 training global configuration parameters */ struct tune_train_params { u32 ck_delay; diff --git a/drivers/ddr/marvell/a38x/ddr_training_ip_db.h b/drivers/ddr/marvell/a38x/ddr_training_ip_db.h index e7de5aef0ca..f1b4d8efc0e 100644 --- a/drivers/ddr/marvell/a38x/ddr_training_ip_db.h +++ b/drivers/ddr/marvell/a38x/ddr_training_ip_db.h @@ -6,10 +6,8 @@ #ifndef _DDR_TRAINING_IP_DB_H_ #define _DDR_TRAINING_IP_DB_H_ -#include "ddr_topology_def.h" #include "ddr3_training_ip_db.h" -u32 speed_bin_table(u8 index, enum speed_bin_table_elements element); u32 pattern_table_get_word(u32 dev_num, enum hws_pattern type, u8 index); #endif /* _DDR3_TRAINING_IP_DB_H_ */ diff --git a/drivers/ddr/marvell/a38x/dram_if.h b/drivers/ddr/marvell/a38x/dram_if.h new file mode 100644 index 00000000000..4d0846489b9 --- /dev/null +++ b/drivers/ddr/marvell/a38x/dram_if.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016 Marvell International Ltd. + */ + +#ifndef _DRAM_IF_H_ +#define _DRAM_IF_H_ + +/* TODO: update atf to this new prototype */ +int dram_init(void); +void dram_mmap_config(void); +unsigned long long dram_iface_mem_sz_get(void); +#endif /* _DRAM_IF_H_ */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr_build_message.c b/drivers/ddr/marvell/a38x/mv_ddr_build_message.c index 2b49b77f730..cc6234fd406 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_build_message.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_build_message.c @@ -1,3 +1,3 @@ // SPDX-License-Identifier: GPL-2.0 const char mv_ddr_build_message[] = ""; -const char mv_ddr_version_string[] = "mv_ddr: mv_ddr-armada-17.10.4"; +const char mv_ddr_version_string[] = "mv_ddr: mv_ddr-armada-18.09.2"; diff --git a/drivers/ddr/marvell/a38x/mv_ddr_common.h b/drivers/ddr/marvell/a38x/mv_ddr_common.h index c71ff442edd..321a390c0d3 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_common.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_common.h @@ -9,10 +9,44 @@ extern const char mv_ddr_build_message[]; extern const char mv_ddr_version_string[]; -#define MV_DDR_NUM_BITS_IN_BYTE 8 -#define MV_DDR_MEGA_BITS (1024 * 1024) +#define _1K 0x00000400 +#define _4K 0x00001000 +#define _8K 0x00002000 +#define _16K 0x00004000 +#define _32K 0x00008000 +#define _64K 0x00010000 +#define _128K 0x00020000 +#define _256K 0x00040000 +#define _512K 0x00080000 + +#define _1M 0x00100000 +#define _2M 0x00200000 +#define _4M 0x00400000 +#define _8M 0x00800000 +#define _16M 0x01000000 +#define _32M 0x02000000 +#define _64M 0x04000000 +#define _128M 0x08000000 +#define _256M 0x10000000 +#define _512M 0x20000000 + +#define _1G 0x40000000 +#define _2G 0x80000000 +#define _4G 0x100000000 +#define _8G 0x200000000 +#define _16G 0x400000000 +#define _32G 0x800000000 +#define _64G 0x1000000000 +#define _128G 0x2000000000 + +#define MEGA 1000000 +#define MV_DDR_MEGABYTE (1024 * 1024) #define MV_DDR_32_BITS_MASK 0xffffffff +#define GET_MAX_VALUE(x, y) \ + (((x) > (y)) ? (x) : (y)) + +void mv_ddr_ver_print(void); unsigned int ceil_div(unsigned int x, unsigned int y); unsigned int time_to_nclk(unsigned int t, unsigned int tclk); int round_div(unsigned int dividend, unsigned int divisor, unsigned int *quotient); diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.c b/drivers/ddr/marvell/a38x/mv_ddr_plat.c index 2f318cb9ea7..cc7942d0ba3 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c @@ -4,7 +4,8 @@ */ #include "ddr3_init.h" - +#include "mv_ddr_training_db.h" +#include "mv_ddr_regs.h" #include "mv_ddr_sys_env_lib.h" #define DDR_INTERFACES_NUM 1 @@ -58,42 +59,42 @@ static struct dlb_config *sys_env_dlb_config_ptr_get(void) return &ddr3_dlb_config_table[0]; } -static u8 a38x_bw_per_freq[DDR_FREQ_LAST] = { - 0x3, /* DDR_FREQ_100 */ - 0x4, /* DDR_FREQ_400 */ - 0x4, /* DDR_FREQ_533 */ - 0x5, /* DDR_FREQ_667 */ - 0x5, /* DDR_FREQ_800 */ - 0x5, /* DDR_FREQ_933 */ - 0x5, /* DDR_FREQ_1066 */ - 0x3, /* DDR_FREQ_311 */ - 0x3, /* DDR_FREQ_333 */ - 0x4, /* DDR_FREQ_467 */ - 0x5, /* DDR_FREQ_850 */ - 0x5, /* DDR_FREQ_600 */ - 0x3, /* DDR_FREQ_300 */ - 0x5, /* DDR_FREQ_900 */ - 0x3, /* DDR_FREQ_360 */ - 0x5 /* DDR_FREQ_1000 */ +static u8 a38x_bw_per_freq[MV_DDR_FREQ_LAST] = { + 0x3, /* MV_DDR_FREQ_100 */ + 0x4, /* MV_DDR_FREQ_400 */ + 0x4, /* MV_DDR_FREQ_533 */ + 0x5, /* MV_DDR_FREQ_667 */ + 0x5, /* MV_DDR_FREQ_800 */ + 0x5, /* MV_DDR_FREQ_933 */ + 0x5, /* MV_DDR_FREQ_1066 */ + 0x3, /* MV_DDR_FREQ_311 */ + 0x3, /* MV_DDR_FREQ_333 */ + 0x4, /* MV_DDR_FREQ_467 */ + 0x5, /* MV_DDR_FREQ_850 */ + 0x5, /* MV_DDR_FREQ_600 */ + 0x3, /* MV_DDR_FREQ_300 */ + 0x5, /* MV_DDR_FREQ_900 */ + 0x3, /* MV_DDR_FREQ_360 */ + 0x5 /* MV_DDR_FREQ_1000 */ }; -static u8 a38x_rate_per_freq[DDR_FREQ_LAST] = { - 0x1, /* DDR_FREQ_100 */ - 0x2, /* DDR_FREQ_400 */ - 0x2, /* DDR_FREQ_533 */ - 0x2, /* DDR_FREQ_667 */ - 0x2, /* DDR_FREQ_800 */ - 0x3, /* DDR_FREQ_933 */ - 0x3, /* DDR_FREQ_1066 */ - 0x1, /* DDR_FREQ_311 */ - 0x1, /* DDR_FREQ_333 */ - 0x2, /* DDR_FREQ_467 */ - 0x2, /* DDR_FREQ_850 */ - 0x2, /* DDR_FREQ_600 */ - 0x1, /* DDR_FREQ_300 */ - 0x2, /* DDR_FREQ_900 */ - 0x1, /* DDR_FREQ_360 */ - 0x2 /* DDR_FREQ_1000 */ +static u8 a38x_rate_per_freq[MV_DDR_FREQ_LAST] = { + 0x1, /* MV_DDR_FREQ_100 */ + 0x2, /* MV_DDR_FREQ_400 */ + 0x2, /* MV_DDR_FREQ_533 */ + 0x2, /* MV_DDR_FREQ_667 */ + 0x2, /* MV_DDR_FREQ_800 */ + 0x3, /* MV_DDR_FREQ_933 */ + 0x3, /* MV_DDR_FREQ_1066 */ + 0x1, /* MV_DDR_FREQ_311 */ + 0x1, /* MV_DDR_FREQ_333 */ + 0x2, /* MV_DDR_FREQ_467 */ + 0x2, /* MV_DDR_FREQ_850 */ + 0x2, /* MV_DDR_FREQ_600 */ + 0x1, /* MV_DDR_FREQ_300 */ + 0x2, /* MV_DDR_FREQ_900 */ + 0x1, /* MV_DDR_FREQ_360 */ + 0x2 /* MV_DDR_FREQ_1000 */ }; static u16 a38x_vco_freq_per_sar_ref_clk_25_mhz[] = { @@ -177,10 +178,11 @@ static u32 dq_bit_map_2_phy_pin[] = { void mv_ddr_mem_scrubbing(void) { + ddr3_new_tip_ecc_scrub(); } static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, - enum hws_ddr_freq freq); + enum mv_ddr_freq freq); /* * Read temperature TJ value @@ -219,7 +221,7 @@ static u32 ddr3_ctrl_get_junc_temp(u8 dev_num) * Notes: * Returns: MV_OK if success, other error code if fail. */ -static int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum hws_ddr_freq freq, +static int ddr3_tip_a38x_get_freq_config(u8 dev_num, enum mv_ddr_freq freq, struct hws_tip_freq_config_info *freq_config_info) { @@ -377,13 +379,13 @@ static int ddr3_tip_a38x_select_ddr_controller(u8 dev_num, int enable) static u8 ddr3_tip_clock_mode(u32 frequency) { - if ((frequency == DDR_FREQ_LOW_FREQ) || (freq_val[frequency] <= 400)) + if ((frequency == MV_DDR_FREQ_LOW_FREQ) || (mv_ddr_freq_get(frequency) <= 400)) return 1; return 2; } -static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) +static int mv_ddr_sar_freq_get(int dev_num, enum mv_ddr_freq *freq) { u32 reg, ref_clk_satr; @@ -402,7 +404,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) reg)); /* fallthrough */ case 0x0: - *freq = DDR_FREQ_333; + *freq = MV_DDR_FREQ_333; break; case 0x3: DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, @@ -410,7 +412,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) reg)); /* fallthrough */ case 0x2: - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0xd: DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, @@ -418,10 +420,10 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) reg)); /* fallthrough */ case 0x4: - *freq = DDR_FREQ_533; + *freq = MV_DDR_FREQ_533; break; case 0x6: - *freq = DDR_FREQ_600; + *freq = MV_DDR_FREQ_600; break; case 0x11: case 0x14: @@ -430,7 +432,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) reg)); /* fallthrough */ case 0x8: - *freq = DDR_FREQ_667; + *freq = MV_DDR_FREQ_667; break; case 0x15: case 0x1b: @@ -439,16 +441,16 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) reg)); /* fallthrough */ case 0xc: - *freq = DDR_FREQ_800; + *freq = MV_DDR_FREQ_800; break; case 0x10: - *freq = DDR_FREQ_933; + *freq = MV_DDR_FREQ_933; break; case 0x12: - *freq = DDR_FREQ_900; + *freq = MV_DDR_FREQ_900; break; case 0x13: - *freq = DDR_FREQ_933; + *freq = MV_DDR_FREQ_933; break; default: *freq = 0; @@ -457,16 +459,16 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) } else { /* REFCLK 40MHz case */ switch (reg) { case 0x3: - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0x5: - *freq = DDR_FREQ_533; + *freq = MV_DDR_FREQ_533; break; case 0xb: - *freq = DDR_FREQ_800; + *freq = MV_DDR_FREQ_800; break; case 0x1e: - *freq = DDR_FREQ_900; + *freq = MV_DDR_FREQ_900; break; default: *freq = 0; @@ -477,7 +479,7 @@ static int mv_ddr_sar_freq_get(int dev_num, enum hws_ddr_freq *freq) return MV_OK; } -static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq) +static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum mv_ddr_freq *freq) { u32 reg, ref_clk_satr; @@ -493,37 +495,37 @@ static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq) case 0x0: case 0x1: /* Medium is same as TF to run PBS in this freq */ - *freq = DDR_FREQ_333; + *freq = MV_DDR_FREQ_333; break; case 0x2: case 0x3: /* Medium is same as TF to run PBS in this freq */ - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0x4: case 0xd: /* Medium is same as TF to run PBS in this freq */ - *freq = DDR_FREQ_533; + *freq = MV_DDR_FREQ_533; break; case 0x8: case 0x10: case 0x11: case 0x14: - *freq = DDR_FREQ_333; + *freq = MV_DDR_FREQ_333; break; case 0xc: case 0x15: case 0x1b: - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0x6: - *freq = DDR_FREQ_300; + *freq = MV_DDR_FREQ_300; break; case 0x12: - *freq = DDR_FREQ_360; + *freq = MV_DDR_FREQ_360; break; case 0x13: - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; default: *freq = 0; @@ -533,17 +535,17 @@ static int ddr3_tip_a38x_get_medium_freq(int dev_num, enum hws_ddr_freq *freq) switch (reg) { case 0x3: /* Medium is same as TF to run PBS in this freq */ - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0x5: /* Medium is same as TF to run PBS in this freq */ - *freq = DDR_FREQ_533; + *freq = MV_DDR_FREQ_533; break; case 0xb: - *freq = DDR_FREQ_400; + *freq = MV_DDR_FREQ_400; break; case 0x1e: - *freq = DDR_FREQ_360; + *freq = MV_DDR_FREQ_360; break; default: *freq = 0; @@ -682,7 +684,7 @@ static int mv_ddr_sw_db_init(u32 dev_num, u32 board_id) static int mv_ddr_training_mask_set(void) { struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); - enum hws_ddr_freq ddr_freq = tm->interface_params[0].memory_freq; + enum mv_ddr_freq ddr_freq = tm->interface_params[0].memory_freq; mask_tune_func = (SET_LOW_FREQ_MASK_BIT | LOAD_PATTERN_MASK_BIT | @@ -699,7 +701,7 @@ static int mv_ddr_training_mask_set(void) CENTRALIZATION_TX_MASK_BIT); rl_mid_freq_wa = 1; - if ((ddr_freq == DDR_FREQ_333) || (ddr_freq == DDR_FREQ_400)) { + if ((ddr_freq == MV_DDR_FREQ_333) || (ddr_freq == MV_DDR_FREQ_400)) { mask_tune_func = (WRITE_LEVELING_MASK_BIT | LOAD_PATTERN_2_MASK_BIT | WRITE_LEVELING_SUPP_MASK_BIT | @@ -712,7 +714,7 @@ static int mv_ddr_training_mask_set(void) } /* Supplementary not supported for ECC modes */ - if (1 == ddr3_if_ecc_enabled()) { + if (mv_ddr_is_ecc_ena()) { mask_tune_func &= ~WRITE_LEVELING_SUPP_TF_MASK_BIT; mask_tune_func &= ~WRITE_LEVELING_SUPP_MASK_BIT; mask_tune_func &= ~PBS_TX_MASK_BIT; @@ -734,11 +736,12 @@ void mv_ddr_set_calib_controller(void) } static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, - enum hws_ddr_freq frequency) + enum mv_ddr_freq frequency) { u32 divider = 0; u32 sar_val, ref_clk_satr; u32 async_val; + u32 freq = mv_ddr_freq_get(frequency); if (if_id != 0) { DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR, @@ -755,11 +758,11 @@ static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, ref_clk_satr = reg_read(DEVICE_SAMPLE_AT_RESET2_REG); if (((ref_clk_satr >> DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET) & 0x1) == DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ) - divider = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val] / freq_val[frequency]; + divider = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val] / freq; else - divider = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val] / freq_val[frequency]; + divider = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val] / freq; - if ((async_mode_at_tf == 1) && (freq_val[frequency] > 400)) { + if ((async_mode_at_tf == 1) && (freq > 400)) { /* Set async mode */ dunit_write(0x20220, 0x1000, 0x1000); dunit_write(0xe42f4, 0x200, 0x200); @@ -769,42 +772,38 @@ static int ddr3_tip_a38x_set_divider(u8 dev_num, u32 if_id, /* Set KNL values */ switch (frequency) { -#ifdef CONFIG_DDR3 - case DDR_FREQ_467: + case MV_DDR_FREQ_467: async_val = 0x806f012; break; - case DDR_FREQ_533: + case MV_DDR_FREQ_533: async_val = 0x807f012; break; - case DDR_FREQ_600: + case MV_DDR_FREQ_600: async_val = 0x805f00a; break; -#endif - case DDR_FREQ_667: + case MV_DDR_FREQ_667: async_val = 0x809f012; break; - case DDR_FREQ_800: + case MV_DDR_FREQ_800: async_val = 0x807f00a; break; -#ifdef CONFIG_DDR3 - case DDR_FREQ_850: + case MV_DDR_FREQ_850: async_val = 0x80cb012; break; -#endif - case DDR_FREQ_900: + case MV_DDR_FREQ_900: async_val = 0x80d7012; break; - case DDR_FREQ_933: + case MV_DDR_FREQ_933: async_val = 0x80df012; break; - case DDR_FREQ_1000: + case MV_DDR_FREQ_1000: async_val = 0x80ef012; break; - case DDR_FREQ_1066: + case MV_DDR_FREQ_1066: async_val = 0x80ff012; break; default: - /* set DDR_FREQ_667 as default */ + /* set MV_DDR_FREQ_667 as default */ async_val = 0x809f012; } dunit_write(0xe42f0, 0xffffffff, async_val); @@ -890,7 +889,7 @@ int mv_ddr_early_init(void) mv_ddr_sw_db_init(0, 0); - if (tm->interface_params[0].memory_freq != DDR_FREQ_SAR) + if (tm->interface_params[0].memory_freq != MV_DDR_FREQ_SAR) async_mode_at_tf = 1; return MV_OK; @@ -934,7 +933,7 @@ int ddr3_silicon_post_init(void) u32 mv_ddr_init_freq_get(void) { - enum hws_ddr_freq freq; + enum mv_ddr_freq freq; mv_ddr_sar_freq_get(0, &freq); diff --git a/drivers/ddr/marvell/a38x/mv_ddr_plat.h b/drivers/ddr/marvell/a38x/mv_ddr_plat.h index 9c5fdecd934..281d4c23013 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_plat.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.h @@ -6,6 +6,7 @@ #ifndef _MV_DDR_PLAT_H #define _MV_DDR_PLAT_H +#define MAX_DEVICE_NUM 1 #define MAX_INTERFACE_NUM 1 #define MAX_BUS_NUM 5 #define DDR_IF_CTRL_SUBPHYS_NUM 3 @@ -121,6 +122,9 @@ #define DLB_QUEUE_MAP_REG 0x1784 #define DLB_SPLIT_REG 0x1788 +/* ck swap control subphy number */ +#define CK_SWAP_CTRL_PHY_NUM 2 + /* Subphy result control per byte registers */ #define RESULT_CONTROL_BYTE_PUP_0_REG 0x1830 #define RESULT_CONTROL_BYTE_PUP_1_REG 0x1834 @@ -221,7 +225,7 @@ extern u16 odt_intercept[]; int mv_ddr_pre_training_soc_config(const char *ddr_type); int mv_ddr_post_training_soc_config(const char *ddr_type); void mv_ddr_mem_scrubbing(void); - +u32 mv_ddr_init_freq_get(void); void mv_ddr_odpg_enable(void); void mv_ddr_odpg_disable(void); void mv_ddr_odpg_done_clr(void); @@ -233,4 +237,5 @@ int mv_ddr_pre_training_fixup(void); int mv_ddr_post_training_fixup(void); int mv_ddr_manual_cal_do(void); int ddr3_calc_mem_cs_size(u32 cs, uint64_t *cs_size); + #endif /* _MV_DDR_PLAT_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr_regs.h b/drivers/ddr/marvell/a38x/mv_ddr_regs.h index ceda204a498..cf2a6c92e80 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_regs.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_regs.h @@ -134,6 +134,7 @@ #define SDRAM_OP_CMD_CS_BASE 8 #define SDRAM_OP_CMD_CS_OFFS(cs) (SDRAM_OP_CMD_CS_BASE + (cs)) #define SDRAM_OP_CMD_CS_MASK 0x1 +#define SDRAM_OP_CMD_ALL_CS_MASK 0xf enum { CMD_NORMAL, CMD_PRECHARGE, @@ -270,6 +271,10 @@ enum { #define ZQC_CFG_REG 0x15e4 #define DRAM_PHY_CFG_REG 0x15ec #define ODPG_CTRL_CTRL_REG 0x1600 +#define ODPG_CTRL_AUTO_REFRESH_OFFS 21 +#define ODPG_CTRL_AUTO_REFRESH_MASK 0x1 +#define ODPG_CTRL_AUTO_REFRESH_DIS 1 +#define ODPG_CTRL_AUTO_REFRESH_ENA 0 #define ODPG_DATA_CTRL_REG 0x1630 #define ODPG_WRBUF_WR_CTRL_OFFS 0 @@ -406,6 +411,20 @@ enum { #define CRX_PHY_REG(cs) (CRX_PHY_BASE + (cs) * 0x4) #define PHY_CTRL_PHY_REG 0x90 +#define INV_PAD0_OFFS 2 +#define INV_PAD1_OFFS 3 +#define INV_PAD2_OFFS 4 +#define INV_PAD3_OFFS 5 +#define INV_PAD4_OFFS 6 +#define INV_PAD5_OFFS 7 +#define INV_PAD6_OFFS 8 +#define INV_PAD7_OFFS 9 +#define INV_PAD8_OFFS 10 +#define INV_PAD9_OFFS 11 +#define INV_PAD10_OFFS 12 +#define INV_PAD_MASK 0x1 +#define INVERT_PAD 1 + #define ADLL_CFG0_PHY_REG 0x92 #define ADLL_CFG1_PHY_REG 0x93 #define ADLL_CFG2_PHY_REG 0x94 diff --git a/drivers/ddr/marvell/a38x/mv_ddr_spd.c b/drivers/ddr/marvell/a38x/mv_ddr_spd.c index e9e7f18098b..04dbfe94d66 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_spd.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_spd.c @@ -81,9 +81,6 @@ int mv_ddr_spd_timing_calc(union mv_ddr_spd_data *spd_data, unsigned int timing_ timing_data[MV_DDR_TWR_MIN] = (spd_data->byte_fields.byte_42 + (spd_data->byte_fields.byte_41.bit_fields.t_wr_min_msn << MV_DDR_SPD_MSB_OFFS)) * MV_DDR_SPD_DATA_MTB; - /* FIXME: wa: set twr to a default value, if it's unset on spd */ - if (timing_data[MV_DDR_TWR_MIN] == 0) - timing_data[MV_DDR_TWR_MIN] = 15000; /* t rcd min, ps */ calc_val = spd_data->byte_fields.byte_25 * MV_DDR_SPD_DATA_MTB + @@ -127,6 +124,13 @@ int mv_ddr_spd_timing_calc(union mv_ddr_spd_data *spd_data, unsigned int timing_ return 1; timing_data[MV_DDR_TRRD_L_MIN] = calc_val; + /* t ccd l min, ps */ + calc_val = spd_data->byte_fields.byte_40 * MV_DDR_SPD_DATA_MTB + + (signed char)spd_data->byte_fields.byte_117 * MV_DDR_SPD_DATA_FTB; + if (calc_val < 0) + return 1; + timing_data[MV_DDR_TCCD_L_MIN] = calc_val; + /* t faw min, ps */ timing_data[MV_DDR_TFAW_MIN] = (spd_data->byte_fields.byte_37 + (spd_data->byte_fields.byte_36.bit_fields.t_faw_min_msn << MV_DDR_SPD_MSB_OFFS)) * @@ -136,17 +140,11 @@ int mv_ddr_spd_timing_calc(union mv_ddr_spd_data *spd_data, unsigned int timing_ timing_data[MV_DDR_TWTR_S_MIN] = (spd_data->byte_fields.byte_44 + (spd_data->byte_fields.byte_43.bit_fields.t_wtr_s_min_msn << MV_DDR_SPD_MSB_OFFS)) * MV_DDR_SPD_DATA_MTB; - /* FIXME: wa: set twtr_s to a default value, if it's unset on spd */ - if (timing_data[MV_DDR_TWTR_S_MIN] == 0) - timing_data[MV_DDR_TWTR_S_MIN] = 2500; /* t wtr l min, ps */ timing_data[MV_DDR_TWTR_L_MIN] = (spd_data->byte_fields.byte_45 + (spd_data->byte_fields.byte_43.bit_fields.t_wtr_l_min_msn << MV_DDR_SPD_MSB_OFFS)) * MV_DDR_SPD_DATA_MTB; - /* FIXME: wa: set twtr_l to a default value, if it's unset on spd */ - if (timing_data[MV_DDR_TWTR_L_MIN] == 0) - timing_data[MV_DDR_TWTR_L_MIN] = 7500; return 0; } diff --git a/drivers/ddr/marvell/a38x/mv_ddr_topology.c b/drivers/ddr/marvell/a38x/mv_ddr_topology.c index f56ce067707..ef3b658a789 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_topology.c +++ b/drivers/ddr/marvell/a38x/mv_ddr_topology.c @@ -2,15 +2,16 @@ /* * Copyright (C) Marvell International Ltd. and its affiliates */ +#include "ddr_ml_wrapper.h" +#include "mv_ddr_plat.h" #include "mv_ddr_topology.h" #include "mv_ddr_common.h" #include "mv_ddr_spd.h" -#include "ddr3_init.h" #include "ddr_topology_def.h" #include "ddr3_training_ip_db.h" #include "ddr3_training_ip.h" - +#include "mv_ddr_training_db.h" unsigned int mv_ddr_cl_calc(unsigned int taa_min, unsigned int tclk) { @@ -32,54 +33,57 @@ unsigned int mv_ddr_cwl_calc(unsigned int tclk) cwl = 11; else if (tclk >= 833) cwl = 12; + else if (tclk >= 750) + cwl = 14; + else if (tclk >= 625) + cwl = 16; else cwl = 0; return cwl; } -struct mv_ddr_topology_map *mv_ddr_topology_map_update(void) +int mv_ddr_topology_map_update(void) { struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + struct if_params *iface_params = &(tm->interface_params[0]); unsigned int octets_per_if_num = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); - enum hws_speed_bin speed_bin_index; - enum hws_ddr_freq freq = DDR_FREQ_LAST; + enum mv_ddr_speed_bin speed_bin_index; + enum mv_ddr_freq freq = MV_DDR_FREQ_LAST; unsigned int tclk; unsigned char val = 0; int i; - - if (tm->interface_params[0].memory_freq == DDR_FREQ_SAR) - tm->interface_params[0].memory_freq = mv_ddr_init_freq_get(); + if (iface_params->memory_freq == MV_DDR_FREQ_SAR) + iface_params->memory_freq = mv_ddr_init_freq_get(); if (tm->cfg_src == MV_DDR_CFG_SPD) { /* check dram device type */ val = mv_ddr_spd_dev_type_get(&tm->spd_data); if (val != MV_DDR_SPD_DEV_TYPE_DDR4) { printf("mv_ddr: unsupported dram device type found\n"); - return NULL; + return -1; } /* update topology map with timing data */ if (mv_ddr_spd_timing_calc(&tm->spd_data, tm->timing_data) > 0) { printf("mv_ddr: negative timing data found\n"); - return NULL; + return -1; } /* update device width in topology map */ - tm->interface_params[0].bus_width = mv_ddr_spd_dev_width_get(&tm->spd_data); + iface_params->bus_width = mv_ddr_spd_dev_width_get(&tm->spd_data); /* update die capacity in topology map */ - tm->interface_params[0].memory_size = mv_ddr_spd_die_capacity_get(&tm->spd_data); + iface_params->memory_size = mv_ddr_spd_die_capacity_get(&tm->spd_data); /* update bus bit mask in topology map */ tm->bus_act_mask = mv_ddr_bus_bit_mask_get(); /* update cs bit mask in topology map */ val = mv_ddr_spd_cs_bit_mask_get(&tm->spd_data); - for (i = 0; i < octets_per_if_num; i++) { - tm->interface_params[0].as_bus_params[i].cs_bitmask = val; - } + for (i = 0; i < octets_per_if_num; i++) + iface_params->as_bus_params[i].cs_bitmask = val; /* check dram module type */ val = mv_ddr_spd_module_type_get(&tm->spd_data); @@ -93,48 +97,44 @@ struct mv_ddr_topology_map *mv_ddr_topology_map_update(void) break; default: printf("mv_ddr: unsupported dram module type found\n"); - return NULL; + return -1; } /* update mirror bit mask in topology map */ val = mv_ddr_spd_mem_mirror_get(&tm->spd_data); - for (i = 0; i < octets_per_if_num; i++) { - tm->interface_params[0].as_bus_params[i].mirror_enable_bitmask = val << 1; - } + for (i = 0; i < octets_per_if_num; i++) + iface_params->as_bus_params[i].mirror_enable_bitmask = val << 1; - tclk = 1000000 / freq_val[tm->interface_params[0].memory_freq]; + tclk = 1000000 / mv_ddr_freq_get(iface_params->memory_freq); /* update cas write latency (cwl) */ val = mv_ddr_cwl_calc(tclk); if (val == 0) { printf("mv_ddr: unsupported cas write latency value found\n"); - return NULL; + return -1; } - tm->interface_params[0].cas_wl = val; + iface_params->cas_wl = val; /* update cas latency (cl) */ mv_ddr_spd_supported_cls_calc(&tm->spd_data); val = mv_ddr_cl_calc(tm->timing_data[MV_DDR_TAA_MIN], tclk); if (val == 0) { printf("mv_ddr: unsupported cas latency value found\n"); - return NULL; + return -1; } - tm->interface_params[0].cas_l = val; + iface_params->cas_l = val; } else if (tm->cfg_src == MV_DDR_CFG_DEFAULT) { /* set cas and cas-write latencies per speed bin, if they unset */ - speed_bin_index = tm->interface_params[0].speed_bin_index; - freq = tm->interface_params[0].memory_freq; + speed_bin_index = iface_params->speed_bin_index; + freq = iface_params->memory_freq; - if (tm->interface_params[0].cas_l == 0) - tm->interface_params[0].cas_l = - cas_latency_table[speed_bin_index].cl_val[freq]; + if (iface_params->cas_l == 0) + iface_params->cas_l = mv_ddr_cl_val_get(speed_bin_index, freq); - if (tm->interface_params[0].cas_wl == 0) - tm->interface_params[0].cas_wl = - cas_write_latency_table[speed_bin_index].cl_val[freq]; + if (iface_params->cas_wl == 0) + iface_params->cas_wl = mv_ddr_cwl_val_get(speed_bin_index, freq); } - - return tm; + return 0; } unsigned short mv_ddr_bus_bit_mask_get(void) @@ -195,3 +195,150 @@ unsigned int mv_ddr_if_bus_width_get(void) return bus_width; } + +unsigned int mv_ddr_cs_num_get(void) +{ + unsigned int cs_num = 0; + unsigned int cs, sphy; + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + struct if_params *iface_params = &(tm->interface_params[0]); + unsigned int sphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); + + for (sphy = 0; sphy < sphy_max; sphy++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, sphy); + break; + } + + for (cs = 0; cs < MAX_CS_NUM; cs++) { + VALIDATE_ACTIVE(iface_params->as_bus_params[sphy].cs_bitmask, cs); + cs_num++; + } + + return cs_num; +} + +int mv_ddr_is_ecc_ena(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + + if (DDR3_IS_ECC_PUP4_MODE(tm->bus_act_mask) || + DDR3_IS_ECC_PUP3_MODE(tm->bus_act_mask) || + DDR3_IS_ECC_PUP8_MODE(tm->bus_act_mask)) + return 1; + else + return 0; +} + +/* translate topology map definition to real memory size in bits */ +static unsigned int mem_size[] = { + ADDR_SIZE_512MB, + ADDR_SIZE_1GB, + ADDR_SIZE_2GB, + ADDR_SIZE_4GB, + ADDR_SIZE_8GB + /* TODO: add capacity up to 256GB */ +}; + +unsigned long long mv_ddr_mem_sz_per_cs_get(void) +{ + unsigned long long mem_sz_per_cs; + unsigned int i, sphys, sphys_per_dunit; + unsigned int sphy_max = ddr3_tip_dev_attr_get(0, MV_ATTR_OCTET_PER_INTERFACE); + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + struct if_params *iface_params = &(tm->interface_params[0]); + + /* calc number of active subphys excl. ecc one */ + for (i = 0, sphys = 0; i < sphy_max - 1; i++) { + VALIDATE_BUS_ACTIVE(tm->bus_act_mask, i); + sphys++; + } + + /* calc number of subphys per ddr unit */ + if (iface_params->bus_width == MV_DDR_DEV_WIDTH_8BIT) + sphys_per_dunit = MV_DDR_ONE_SPHY_PER_DUNIT; + else if (iface_params->bus_width == MV_DDR_DEV_WIDTH_16BIT) + sphys_per_dunit = MV_DDR_TWO_SPHY_PER_DUNIT; + else { + printf("mv_ddr: unsupported bus width type found\n"); + return 0; + } + + /* calc dram size per cs */ + mem_sz_per_cs = (unsigned long long)mem_size[iface_params->memory_size] * + (unsigned long long)sphys / + (unsigned long long)sphys_per_dunit; + + return mem_sz_per_cs; +} + +unsigned long long mv_ddr_mem_sz_get(void) +{ + unsigned long long tot_mem_sz = 0; + unsigned long long mem_sz_per_cs = 0; + unsigned long long max_cs = mv_ddr_cs_num_get(); + + mem_sz_per_cs = mv_ddr_mem_sz_per_cs_get(); + tot_mem_sz = max_cs * mem_sz_per_cs; + + return tot_mem_sz; +} + +unsigned int mv_ddr_rtt_nom_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int rtt_nom = tm->edata.mem_edata.rtt_nom; + + if (rtt_nom >= MV_DDR_RTT_NOM_PARK_RZQ_LAST) { + printf("error: %s: unsupported rtt_nom parameter found\n", __func__); + rtt_nom = PARAM_UNDEFINED; + } + + return rtt_nom; +} + +unsigned int mv_ddr_rtt_park_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int cs_num = mv_ddr_cs_num_get(); + unsigned int rtt_park = MV_DDR_RTT_NOM_PARK_RZQ_LAST; + + if (cs_num > 0 && cs_num <= MAX_CS_NUM) + rtt_park = tm->edata.mem_edata.rtt_park[cs_num - 1]; + + if (rtt_park >= MV_DDR_RTT_NOM_PARK_RZQ_LAST) { + printf("error: %s: unsupported rtt_park parameter found\n", __func__); + rtt_park = PARAM_UNDEFINED; + } + + return rtt_park; +} + +unsigned int mv_ddr_rtt_wr_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int cs_num = mv_ddr_cs_num_get(); + unsigned int rtt_wr = MV_DDR_RTT_WR_RZQ_LAST; + + if (cs_num > 0 && cs_num <= MAX_CS_NUM) + rtt_wr = tm->edata.mem_edata.rtt_wr[cs_num - 1]; + + if (rtt_wr >= MV_DDR_RTT_WR_RZQ_LAST) { + printf("error: %s: unsupported rtt_wr parameter found\n", __func__); + rtt_wr = PARAM_UNDEFINED; + } + + return rtt_wr; +} + +unsigned int mv_ddr_dic_get(void) +{ + struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get(); + unsigned int dic = tm->edata.mem_edata.dic; + + if (dic >= MV_DDR_DIC_RZQ_LAST) { + printf("error: %s: unsupported dic parameter found\n", __func__); + dic = PARAM_UNDEFINED; + } + + return dic; +} diff --git a/drivers/ddr/marvell/a38x/mv_ddr_topology.h b/drivers/ddr/marvell/a38x/mv_ddr_topology.h index 7bef2d1e0e8..766f25db573 100644 --- a/drivers/ddr/marvell/a38x/mv_ddr_topology.h +++ b/drivers/ddr/marvell/a38x/mv_ddr_topology.h @@ -6,6 +6,75 @@ #ifndef _MV_DDR_TOPOLOGY_H #define _MV_DDR_TOPOLOGY_H +#define MAX_CS_NUM 4 + +enum mv_ddr_speed_bin { + SPEED_BIN_DDR_800D, + SPEED_BIN_DDR_800E, + SPEED_BIN_DDR_1066E, + SPEED_BIN_DDR_1066F, + SPEED_BIN_DDR_1066G, + SPEED_BIN_DDR_1333F, + SPEED_BIN_DDR_1333G, + SPEED_BIN_DDR_1333H, + SPEED_BIN_DDR_1333J, + SPEED_BIN_DDR_1600G, + SPEED_BIN_DDR_1600H, + SPEED_BIN_DDR_1600J, + SPEED_BIN_DDR_1600K, + SPEED_BIN_DDR_1866J, + SPEED_BIN_DDR_1866K, + SPEED_BIN_DDR_1866L, + SPEED_BIN_DDR_1866M, + SPEED_BIN_DDR_2133K, + SPEED_BIN_DDR_2133L, + SPEED_BIN_DDR_2133M, + SPEED_BIN_DDR_2133N, + + SPEED_BIN_DDR_1333H_EXT, + SPEED_BIN_DDR_1600K_EXT, + SPEED_BIN_DDR_1866M_EXT +}; + +enum mv_ddr_freq { + MV_DDR_FREQ_LOW_FREQ, + MV_DDR_FREQ_400, + MV_DDR_FREQ_533, + MV_DDR_FREQ_667, + MV_DDR_FREQ_800, + MV_DDR_FREQ_933, + MV_DDR_FREQ_1066, + MV_DDR_FREQ_311, + MV_DDR_FREQ_333, + MV_DDR_FREQ_467, + MV_DDR_FREQ_850, + MV_DDR_FREQ_600, + MV_DDR_FREQ_300, + MV_DDR_FREQ_900, + MV_DDR_FREQ_360, + MV_DDR_FREQ_1000, + MV_DDR_FREQ_LAST, + MV_DDR_FREQ_SAR +}; + +enum mv_ddr_speed_bin_timing { + SPEED_BIN_TRCD, + SPEED_BIN_TRP, + SPEED_BIN_TRAS, + SPEED_BIN_TRC, + SPEED_BIN_TRRD1K, + SPEED_BIN_TRRD2K, + SPEED_BIN_TPD, + SPEED_BIN_TFAW1K, + SPEED_BIN_TFAW2K, + SPEED_BIN_TWTR, + SPEED_BIN_TRTP, + SPEED_BIN_TWR, + SPEED_BIN_TMOD, + SPEED_BIN_TXPDLL, + SPEED_BIN_TXSDLL +}; + /* ddr bus masks */ #define BUS_MASK_32BIT 0xf #define BUS_MASK_32BIT_ECC 0x1f @@ -16,6 +85,12 @@ #define MV_DDR_64BIT_ECC_PUP8_BUS_MASK 0x1ff #define MV_DDR_32BIT_ECC_PUP8_BUS_MASK 0x10f +#define MV_DDR_CS_BITMASK_1CS 0x1 +#define MV_DDR_CS_BITMASK_2CS 0x3 + +#define MV_DDR_ONE_SPHY_PER_DUNIT 1 +#define MV_DDR_TWO_SPHY_PER_DUNIT 2 + /* source of ddr configuration data */ enum mv_ddr_cfg_src { MV_DDR_CFG_DEFAULT, /* based on data in mv_ddr_topology_map structure */ @@ -25,11 +100,6 @@ enum mv_ddr_cfg_src { MV_DDR_CFG_LAST }; -enum mv_ddr_num_of_sub_phys_per_ddr_unit { - SINGLE_SUB_PHY = 1, - TWO_SUB_PHYS = 2 -}; - enum mv_ddr_temperature { MV_DDR_TEMP_LOW, MV_DDR_TEMP_NORMAL, @@ -53,12 +123,78 @@ enum mv_ddr_timing_data { MV_DDR_TRAS_MIN, /* min active to precharge delay time (t ras min) */ MV_DDR_TRRD_S_MIN, /* min activate to activate delay time (t rrd_s min), diff bank group */ MV_DDR_TRRD_L_MIN, /* min activate to activate delay time (t rrd_l min), same bank group */ + MV_DDR_TCCD_L_MIN, /* min cas to cas delay time (t ccd_l min), same bank group */ MV_DDR_TFAW_MIN, /* min four activate window delay time (t faw min) */ MV_DDR_TWTR_S_MIN, /* min write to read time (t wtr s min), diff bank group */ MV_DDR_TWTR_L_MIN, /* min write to read time (t wtr l min), same bank group */ MV_DDR_TDATA_LAST }; +enum mv_ddr_electrical_data { + MV_DDR_CK_DLY, + MV_DDR_PHY_REG3, + MV_DDR_ZPRI_DATA, + MV_DDR_ZNRI_DATA, + MV_DDR_ZPRI_CTRL, + MV_DDR_ZNRI_CTRL, + MV_DDR_ZPODT_DATA, + MV_DDR_ZNODT_DATA, + MV_DDR_ZPODT_CTRL, + MV_DDR_ZNODT_CTRL, + MV_DDR_DIC, + MV_DDR_ODT_CFG, + MV_DDR_RTT_NOM, + MV_DDR_RTT_WR, + MV_DDR_RTT_PARK, + MV_DDR_EDATA_LAST +}; + +/* memory electrical configuration values */ +enum mv_ddr_rtt_nom_park_evalue { + MV_DDR_RTT_NOM_PARK_RZQ_DISABLE, + MV_DDR_RTT_NOM_PARK_RZQ_DIV4, /* 60-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV2, /* 120-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV6, /* 40-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV1, /* 240-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV5, /* 48-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV3, /* 80-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_DIV7, /* 34-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_NOM_PARK_RZQ_LAST +}; + +enum mv_ddr_rtt_wr_evalue { + MV_DDR_RTT_WR_DYN_ODT_OFF, + MV_DDR_RTT_WR_RZQ_DIV2, /* 120-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_WR_RZQ_DIV1, /* 240-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_WR_HIZ, + MV_DDR_RTT_WR_RZQ_DIV3, /* 80-Ohm; RZQ = 240-Ohm */ + MV_DDR_RTT_WR_RZQ_LAST +}; + +enum mv_ddr_dic_evalue { + MV_DDR_DIC_RZQ_DIV7, /* 34-Ohm; RZQ = 240-Ohm */ + MV_DDR_DIC_RZQ_DIV5, /* 48-Ohm; RZQ = 240-Ohm */ + MV_DDR_DIC_RZQ_LAST +}; + +/* phy electrical configuration values */ +enum mv_ddr_ohm_evalue { + MV_DDR_OHM_30 = 30, + MV_DDR_OHM_48 = 48, + MV_DDR_OHM_60 = 60, + MV_DDR_OHM_80 = 80, + MV_DDR_OHM_120 = 120, + MV_DDR_OHM_240 = 240, + MV_DDR_OHM_LAST +}; + +/* mac electrical configuration values */ +enum mv_ddr_odt_cfg_evalue { + MV_DDR_ODT_CFG_NORMAL, + MV_DDR_ODT_CFG_ALWAYS_ON, + MV_DDR_ODT_CFG_LAST +}; + enum mv_ddr_dev_width { /* sdram device width */ MV_DDR_DEV_WIDTH_4BIT, MV_DDR_DEV_WIDTH_8BIT, @@ -119,11 +255,75 @@ enum mv_ddr_die_count { MV_DDR_DIE_CNT_LAST }; +#define IS_ACTIVE(mask, id) \ + ((mask) & (1 << (id))) + +#define VALIDATE_ACTIVE(mask, id) \ + { \ + if (IS_ACTIVE(mask, id) == 0) \ + continue; \ + } + +#define IS_IF_ACTIVE(if_mask, if_id) \ + ((if_mask) & (1 << (if_id))) + +#define VALIDATE_IF_ACTIVE(mask, id) \ + { \ + if (IS_IF_ACTIVE(mask, id) == 0) \ + continue; \ + } + +#define IS_BUS_ACTIVE(if_mask , if_id) \ + (((if_mask) >> (if_id)) & 1) + +#define VALIDATE_BUS_ACTIVE(mask, id) \ + { \ + if (IS_BUS_ACTIVE(mask, id) == 0) \ + continue; \ + } + +#define DDR3_IS_ECC_PUP3_MODE(if_mask) \ + (((if_mask) == BUS_MASK_16BIT_ECC_PUP3) ? 1 : 0) + +#define DDR3_IS_ECC_PUP4_MODE(if_mask) \ + (((if_mask) == BUS_MASK_32BIT_ECC || \ + (if_mask) == BUS_MASK_16BIT_ECC) ? 1 : 0) + +#define DDR3_IS_16BIT_DRAM_MODE(mask) \ + (((mask) == BUS_MASK_16BIT || \ + (mask) == BUS_MASK_16BIT_ECC || \ + (mask) == BUS_MASK_16BIT_ECC_PUP3) ? 1 : 0) + +#define DDR3_IS_ECC_PUP8_MODE(if_mask) \ + (((if_mask) == MV_DDR_32BIT_ECC_PUP8_BUS_MASK || \ + (if_mask) == MV_DDR_64BIT_ECC_PUP8_BUS_MASK) ? 1 : 0) + +#define MV_DDR_IS_64BIT_DRAM_MODE(mask) \ + ((((mask) & MV_DDR_64BIT_BUS_MASK) == MV_DDR_64BIT_BUS_MASK) || \ + (((mask) & MV_DDR_64BIT_ECC_PUP8_BUS_MASK) == MV_DDR_64BIT_ECC_PUP8_BUS_MASK) ? 1 : 0) + +#define MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(mask, sphys) \ + (((sphys) == 9) && \ + (((mask) == BUS_MASK_32BIT) || \ + ((mask) == MV_DDR_32BIT_ECC_PUP8_BUS_MASK)) ? 1 : 0) + +#define MV_DDR_IS_HALF_BUS_DRAM_MODE(mask, sphys) \ + (MV_DDR_IS_32BIT_IN_64BIT_DRAM_MODE(mask, sphys) || \ + DDR3_IS_16BIT_DRAM_MODE(mask)) + +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void); unsigned int mv_ddr_cl_calc(unsigned int taa_min, unsigned int tclk); unsigned int mv_ddr_cwl_calc(unsigned int tclk); -struct mv_ddr_topology_map *mv_ddr_topology_map_update(void); -struct dram_config *mv_ddr_dram_config_update(void); +int mv_ddr_topology_map_update(void); unsigned short mv_ddr_bus_bit_mask_get(void); unsigned int mv_ddr_if_bus_width_get(void); +unsigned int mv_ddr_cs_num_get(void); +int mv_ddr_is_ecc_ena(void); +unsigned long long mv_ddr_mem_sz_per_cs_get(void); +unsigned long long mv_ddr_mem_sz_get(void); +unsigned int mv_ddr_rtt_nom_get(void); +unsigned int mv_ddr_rtt_park_get(void); +unsigned int mv_ddr_rtt_wr_get(void); +unsigned int mv_ddr_dic_get(void); #endif /* _MV_DDR_TOPOLOGY_H */ diff --git a/drivers/ddr/marvell/a38x/mv_ddr_training_db.h b/drivers/ddr/marvell/a38x/mv_ddr_training_db.h new file mode 100644 index 00000000000..838be4574d9 --- /dev/null +++ b/drivers/ddr/marvell/a38x/mv_ddr_training_db.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 Marvell International Ltd. + */ + +#ifndef _MV_DDR_TRAINING_DB_H +#define _MV_DDR_TRAINING_DB_H + +#include "mv_ddr_topology.h" + +/* in ns */ +#define TREFI_LOW 7800 +#define TREFI_HIGH 3900 + +enum mv_ddr_page_size { + MV_DDR_PAGE_SIZE_1K = 1, + MV_DDR_PAGE_SIZE_2K +}; + +struct mv_ddr_page_element { + /* 8-bit bus width page size */ + enum mv_ddr_page_size page_size_8bit; + /* 16-bit bus width page size */ + enum mv_ddr_page_size page_size_16bit; +}; + +/* cas latency value per frequency */ +struct mv_ddr_cl_val_per_freq { + unsigned int cl_val[MV_DDR_FREQ_LAST]; +}; + +u32 mv_ddr_rfc_get(u32 mem); +unsigned int *mv_ddr_freq_tbl_get(void); +u32 mv_ddr_freq_get(enum mv_ddr_freq freq); +u32 mv_ddr_page_size_get(enum mv_ddr_dev_width bus_width, enum mv_ddr_die_capacity mem_size); +unsigned int mv_ddr_speed_bin_timing_get(enum mv_ddr_speed_bin index, enum mv_ddr_speed_bin_timing element); +u32 mv_ddr_cl_val_get(u32 index, u32 freq); +u32 mv_ddr_cwl_val_get(u32 index, u32 freq); + +#endif /* _MV_DDR_TRAINING_DB_H */ diff --git a/drivers/ddr/marvell/a38x/xor.c b/drivers/ddr/marvell/a38x/xor.c index f859596d895..5fb9e216d38 100644 --- a/drivers/ddr/marvell/a38x/xor.c +++ b/drivers/ddr/marvell/a38x/xor.c @@ -4,6 +4,7 @@ */ #include "ddr3_init.h" +#include "mv_ddr_common.h" #include "xor_regs.h" /* defines */ @@ -339,16 +340,17 @@ void ddr3_new_tip_ecc_scrub(void) { u32 cs_c, max_cs; u32 cs_ena = 0; - u32 dev_num = 0; uint64_t total_mem_size, cs_mem_size = 0; printf("DDR Training Sequence - Start scrubbing\n"); - max_cs = ddr3_tip_max_cs_get(dev_num); + max_cs = mv_ddr_cs_num_get(); for (cs_c = 0; cs_c < max_cs; cs_c++) cs_ena |= 1 << cs_c; - /* assume that all CS have same size */ +#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) + /* all chip-selects are of same size */ ddr3_calc_mem_cs_size(0, &cs_mem_size); +#endif mv_sys_xor_init(max_cs, cs_ena, cs_mem_size, 0); total_mem_size = max_cs * cs_mem_size; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 4ee6afad35e..8a4162eccdb 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -12,6 +12,20 @@ config DMA buses that is used to transfer data to and from memory. The uclass interface is defined in include/dma.h. +config DMA_CHANNELS + bool "Enable DMA channels support" + depends on DMA + help + Enable channels support for DMA. Some DMA controllers have multiple + channels which can either transfer data to/from different devices. + +config SANDBOX_DMA + bool "Enable the sandbox DMA test driver" + depends on DMA && DMA_CHANNELS && SANDBOX + help + Enable support for a test DMA uclass implementation. It stimulates + DMA transfer by simple copying data between channels. + config TI_EDMA3 bool "TI EDMA3 driver" help diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 4eaef8ac651..aff31f986a1 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_DMA) += dma-uclass.o obj-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o obj-$(CONFIG_APBH_DMA) += apbh_dma.o obj-$(CONFIG_FSL_DMA) += fsl_dma.o +obj-$(CONFIG_SANDBOX_DMA) += sandbox-dma-test.o obj-$(CONFIG_TI_KSNAV) += keystone_nav.o keystone_nav_cfg.o obj-$(CONFIG_TI_EDMA3) += ti-edma3.o obj-$(CONFIG_DMA_LPC32XX) += lpc32xx_dma.o diff --git a/drivers/dma/dma-uclass.c b/drivers/dma/dma-uclass.c index a33f7d52dac..9c961cf1e2c 100644 --- a/drivers/dma/dma-uclass.c +++ b/drivers/dma/dma-uclass.c @@ -2,19 +2,192 @@ /* * Direct Memory Access U-Class driver * - * (C) Copyright 2015 - * Texas Instruments Incorporated, <www.ti.com> + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2015 - 2018 Texas Instruments Incorporated <www.ti.com> + * Written by Mugunthan V N <mugunthanvnm@ti.com> * * Author: Mugunthan V N <mugunthanvnm@ti.com> */ #include <common.h> -#include <dma.h> #include <dm.h> -#include <dm/uclass-internal.h> -#include <dm/device-internal.h> +#include <dm/read.h> +#include <dma-uclass.h> +#include <dt-structs.h> #include <errno.h> +#ifdef CONFIG_DMA_CHANNELS +static inline struct dma_ops *dma_dev_ops(struct udevice *dev) +{ + return (struct dma_ops *)dev->driver->ops; +} + +# if CONFIG_IS_ENABLED(OF_CONTROL) +static int dma_of_xlate_default(struct dma *dma, + struct ofnode_phandle_args *args) +{ + debug("%s(dma=%p)\n", __func__, dma); + + if (args->args_count > 1) { + pr_err("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) + dma->id = args->args[0]; + else + dma->id = 0; + + return 0; +} + +int dma_get_by_index(struct udevice *dev, int index, struct dma *dma) +{ + int ret; + struct ofnode_phandle_args args; + struct udevice *dev_dma; + const struct dma_ops *ops; + + debug("%s(dev=%p, index=%d, dma=%p)\n", __func__, dev, index, dma); + + assert(dma); + dma->dev = NULL; + + ret = dev_read_phandle_with_args(dev, "dmas", "#dma-cells", 0, index, + &args); + if (ret) { + pr_err("%s: dev_read_phandle_with_args failed: err=%d\n", + __func__, ret); + return ret; + } + + ret = uclass_get_device_by_ofnode(UCLASS_DMA, args.node, &dev_dma); + if (ret) { + pr_err("%s: uclass_get_device_by_ofnode failed: err=%d\n", + __func__, ret); + return ret; + } + + dma->dev = dev_dma; + + ops = dma_dev_ops(dev_dma); + + if (ops->of_xlate) + ret = ops->of_xlate(dma, &args); + else + ret = dma_of_xlate_default(dma, &args); + if (ret) { + pr_err("of_xlate() failed: %d\n", ret); + return ret; + } + + return dma_request(dev_dma, dma); +} + +int dma_get_by_name(struct udevice *dev, const char *name, struct dma *dma) +{ + int index; + + debug("%s(dev=%p, name=%s, dma=%p)\n", __func__, dev, name, dma); + dma->dev = NULL; + + index = dev_read_stringlist_search(dev, "dma-names", name); + if (index < 0) { + pr_err("dev_read_stringlist_search() failed: %d\n", index); + return index; + } + + return dma_get_by_index(dev, index, dma); +} +# endif /* OF_CONTROL */ + +int dma_request(struct udevice *dev, struct dma *dma) +{ + struct dma_ops *ops = dma_dev_ops(dev); + + debug("%s(dev=%p, dma=%p)\n", __func__, dev, dma); + + dma->dev = dev; + + if (!ops->request) + return 0; + + return ops->request(dma); +} + +int dma_free(struct dma *dma) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->free) + return 0; + + return ops->free(dma); +} + +int dma_enable(struct dma *dma) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->enable) + return -ENOSYS; + + return ops->enable(dma); +} + +int dma_disable(struct dma *dma) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->disable) + return -ENOSYS; + + return ops->disable(dma); +} + +int dma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->prepare_rcv_buf) + return -1; + + return ops->prepare_rcv_buf(dma, dst, size); +} + +int dma_receive(struct dma *dma, void **dst, void *metadata) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->receive) + return -ENOSYS; + + return ops->receive(dma, dst, metadata); +} + +int dma_send(struct dma *dma, void *src, size_t len, void *metadata) +{ + struct dma_ops *ops = dma_dev_ops(dma->dev); + + debug("%s(dma=%p)\n", __func__, dma); + + if (!ops->send) + return -ENOSYS; + + return ops->send(dma, src, len, metadata); +} +#endif /* CONFIG_DMA_CHANNELS */ + int dma_get_device(u32 transfer_type, struct udevice **devp) { struct udevice *dev; diff --git a/drivers/dma/sandbox-dma-test.c b/drivers/dma/sandbox-dma-test.c new file mode 100644 index 00000000000..8fcef1863e2 --- /dev/null +++ b/drivers/dma/sandbox-dma-test.c @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Direct Memory Access U-Class Simulation driver + * + * Copyright (C) 2018 Texas Instruments Incorporated <www.ti.com> + * + * Author: Grygorii Strashko <grygorii.strashko@ti.com> + */ + +#include <common.h> +#include <dm.h> +#include <dm/read.h> +#include <dma-uclass.h> +#include <dt-structs.h> +#include <errno.h> + +#define SANDBOX_DMA_CH_CNT 3 +#define SANDBOX_DMA_BUF_SIZE 1024 + +struct sandbox_dma_chan { + struct sandbox_dma_dev *ud; + char name[20]; + u32 id; + enum dma_direction dir; + bool in_use; + bool enabled; +}; + +struct sandbox_dma_dev { + struct device *dev; + u32 ch_count; + struct sandbox_dma_chan channels[SANDBOX_DMA_CH_CNT]; + uchar buf[SANDBOX_DMA_BUF_SIZE]; + uchar *buf_rx; + size_t data_len; + u32 meta; +}; + +static int sandbox_dma_transfer(struct udevice *dev, int direction, + void *dst, void *src, size_t len) +{ + memcpy(dst, src, len); + + return 0; +} + +static int sandbox_dma_of_xlate(struct dma *dma, + struct ofnode_phandle_args *args) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + debug("%s(dma id=%u)\n", __func__, args->args[0]); + + if (args->args[0] >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + + dma->id = args->args[0]; + + uc = &ud->channels[dma->id]; + + if (dma->id == 1) + uc->dir = DMA_MEM_TO_DEV; + else if (dma->id == 2) + uc->dir = DMA_DEV_TO_MEM; + else + uc->dir = DMA_MEM_TO_MEM; + debug("%s(dma id=%lu dir=%d)\n", __func__, dma->id, uc->dir); + + return 0; +} + +static int sandbox_dma_request(struct dma *dma) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + + uc = &ud->channels[dma->id]; + if (uc->in_use) + return -EBUSY; + + uc->in_use = true; + debug("%s(dma id=%lu in_use=%d)\n", __func__, dma->id, uc->in_use); + + return 0; +} + +static int sandbox_dma_free(struct dma *dma) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + + uc = &ud->channels[dma->id]; + if (!uc->in_use) + return -EINVAL; + + uc->in_use = false; + ud->buf_rx = NULL; + ud->data_len = 0; + debug("%s(dma id=%lu in_use=%d)\n", __func__, dma->id, uc->in_use); + + return 0; +} + +static int sandbox_dma_enable(struct dma *dma) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + + uc = &ud->channels[dma->id]; + if (!uc->in_use) + return -EINVAL; + if (uc->enabled) + return -EINVAL; + + uc->enabled = true; + debug("%s(dma id=%lu enabled=%d)\n", __func__, dma->id, uc->enabled); + + return 0; +} + +static int sandbox_dma_disable(struct dma *dma) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + + uc = &ud->channels[dma->id]; + if (!uc->in_use) + return -EINVAL; + if (!uc->enabled) + return -EINVAL; + + uc->enabled = false; + debug("%s(dma id=%lu enabled=%d)\n", __func__, dma->id, uc->enabled); + + return 0; +} + +static int sandbox_dma_send(struct dma *dma, + void *src, size_t len, void *metadata) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + if (!src || !metadata) + return -EINVAL; + + debug("%s(dma id=%lu)\n", __func__, dma->id); + + uc = &ud->channels[dma->id]; + if (uc->dir != DMA_MEM_TO_DEV) + return -EINVAL; + if (!uc->in_use) + return -EINVAL; + if (!uc->enabled) + return -EINVAL; + if (len >= SANDBOX_DMA_BUF_SIZE) + return -EINVAL; + + memcpy(ud->buf, src, len); + ud->data_len = len; + ud->meta = *((u32 *)metadata); + + debug("%s(dma id=%lu len=%zu meta=%08x)\n", + __func__, dma->id, len, ud->meta); + + return 0; +} + +static int sandbox_dma_receive(struct dma *dma, void **dst, void *metadata) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + struct sandbox_dma_chan *uc; + + if (dma->id >= SANDBOX_DMA_CH_CNT) + return -EINVAL; + if (!dst || !metadata) + return -EINVAL; + + uc = &ud->channels[dma->id]; + if (uc->dir != DMA_DEV_TO_MEM) + return -EINVAL; + if (!uc->in_use) + return -EINVAL; + if (!uc->enabled) + return -EINVAL; + if (!ud->data_len) + return 0; + + if (ud->buf_rx) { + memcpy(ud->buf_rx, ud->buf, ud->data_len); + *dst = ud->buf_rx; + } else { + memcpy(*dst, ud->buf, ud->data_len); + } + + *((u32 *)metadata) = ud->meta; + + debug("%s(dma id=%lu len=%zu meta=%08x %p)\n", + __func__, dma->id, ud->data_len, ud->meta, *dst); + + return ud->data_len; +} + +static int sandbox_dma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size) +{ + struct sandbox_dma_dev *ud = dev_get_priv(dma->dev); + + ud->buf_rx = dst; + + return 0; +} + +static const struct dma_ops sandbox_dma_ops = { + .transfer = sandbox_dma_transfer, + .of_xlate = sandbox_dma_of_xlate, + .request = sandbox_dma_request, + .free = sandbox_dma_free, + .enable = sandbox_dma_enable, + .disable = sandbox_dma_disable, + .send = sandbox_dma_send, + .receive = sandbox_dma_receive, + .prepare_rcv_buf = sandbox_dma_prepare_rcv_buf, +}; + +static int sandbox_dma_probe(struct udevice *dev) +{ + struct dma_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct sandbox_dma_dev *ud = dev_get_priv(dev); + int i, ret = 0; + + uc_priv->supported = DMA_SUPPORTS_MEM_TO_MEM | + DMA_SUPPORTS_MEM_TO_DEV | + DMA_SUPPORTS_DEV_TO_MEM; + + ud->ch_count = SANDBOX_DMA_CH_CNT; + ud->buf_rx = NULL; + ud->meta = 0; + ud->data_len = 0; + + pr_err("Number of channels: %u\n", ud->ch_count); + + for (i = 0; i < ud->ch_count; i++) { + struct sandbox_dma_chan *uc = &ud->channels[i]; + + uc->ud = ud; + uc->id = i; + sprintf(uc->name, "DMA chan%d\n", i); + uc->in_use = false; + uc->enabled = false; + } + + return ret; +} + +static const struct udevice_id sandbox_dma_ids[] = { + { .compatible = "sandbox,dma" }, + { } +}; + +U_BOOT_DRIVER(sandbox_dma) = { + .name = "sandbox-dma", + .id = UCLASS_DMA, + .of_match = sandbox_dma_ids, + .ops = &sandbox_dma_ops, + .probe = sandbox_dma_probe, + .priv_auto_alloc_size = sizeof(struct sandbox_dma_dev), +}; diff --git a/drivers/dma/ti-edma3.c b/drivers/dma/ti-edma3.c index 2131e10a408..7e11b13e45c 100644 --- a/drivers/dma/ti-edma3.c +++ b/drivers/dma/ti-edma3.c @@ -11,7 +11,7 @@ #include <asm/io.h> #include <common.h> #include <dm.h> -#include <dma.h> +#include <dma-uclass.h> #include <asm/omap_common.h> #include <asm/ti-common/ti-edma3.h> diff --git a/drivers/gpio/stm32f7_gpio.c b/drivers/gpio/stm32f7_gpio.c index a690c437ebc..f160b4e6895 100644 --- a/drivers/gpio/stm32f7_gpio.c +++ b/drivers/gpio/stm32f7_gpio.c @@ -15,17 +15,45 @@ #include <linux/errno.h> #include <linux/io.h> -#define STM32_GPIOS_PER_BANK 16 #define MODE_BITS(gpio_pin) (gpio_pin * 2) #define MODE_BITS_MASK 3 #define BSRR_BIT(gpio_pin, value) BIT(gpio_pin + (value ? 0 : 16)) +/* + * convert gpio offset to gpio index taking into account gpio holes + * into gpio bank + */ +int stm32_offset_to_index(struct udevice *dev, unsigned int offset) +{ + struct stm32_gpio_priv *priv = dev_get_priv(dev); + int idx = 0; + int i; + + for (i = 0; i < STM32_GPIOS_PER_BANK; i++) { + if (priv->gpio_range & BIT(i)) { + if (idx == offset) + return idx; + idx++; + } + } + /* shouldn't happen */ + return -EINVAL; +} + static int stm32_gpio_direction_input(struct udevice *dev, unsigned offset) { struct stm32_gpio_priv *priv = dev_get_priv(dev); struct stm32_gpio_regs *regs = priv->regs; - int bits_index = MODE_BITS(offset); - int mask = MODE_BITS_MASK << bits_index; + int bits_index; + int mask; + int idx; + + idx = stm32_offset_to_index(dev, offset); + if (idx < 0) + return idx; + + bits_index = MODE_BITS(idx); + mask = MODE_BITS_MASK << bits_index; clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_IN << bits_index); @@ -37,12 +65,20 @@ static int stm32_gpio_direction_output(struct udevice *dev, unsigned offset, { struct stm32_gpio_priv *priv = dev_get_priv(dev); struct stm32_gpio_regs *regs = priv->regs; - int bits_index = MODE_BITS(offset); - int mask = MODE_BITS_MASK << bits_index; + int bits_index; + int mask; + int idx; + + idx = stm32_offset_to_index(dev, offset); + if (idx < 0) + return idx; + + bits_index = MODE_BITS(idx); + mask = MODE_BITS_MASK << bits_index; clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_OUT << bits_index); - writel(BSRR_BIT(offset, value), ®s->bsrr); + writel(BSRR_BIT(idx, value), ®s->bsrr); return 0; } @@ -51,16 +87,26 @@ static int stm32_gpio_get_value(struct udevice *dev, unsigned offset) { struct stm32_gpio_priv *priv = dev_get_priv(dev); struct stm32_gpio_regs *regs = priv->regs; + int idx; + + idx = stm32_offset_to_index(dev, offset); + if (idx < 0) + return idx; - return readl(®s->idr) & BIT(offset) ? 1 : 0; + return readl(®s->idr) & BIT(idx) ? 1 : 0; } static int stm32_gpio_set_value(struct udevice *dev, unsigned offset, int value) { struct stm32_gpio_priv *priv = dev_get_priv(dev); struct stm32_gpio_regs *regs = priv->regs; + int idx; + + idx = stm32_offset_to_index(dev, offset); + if (idx < 0) + return idx; - writel(BSRR_BIT(offset, value), ®s->bsrr); + writel(BSRR_BIT(idx, value), ®s->bsrr); return 0; } @@ -69,10 +115,18 @@ static int stm32_gpio_get_function(struct udevice *dev, unsigned int offset) { struct stm32_gpio_priv *priv = dev_get_priv(dev); struct stm32_gpio_regs *regs = priv->regs; - int bits_index = MODE_BITS(offset); - int mask = MODE_BITS_MASK << bits_index; + int bits_index; + int mask; + int idx; u32 mode; + idx = stm32_offset_to_index(dev, offset); + if (idx < 0) + return idx; + + bits_index = MODE_BITS(idx); + mask = MODE_BITS_MASK << bits_index; + mode = (readl(®s->moder) & mask) >> bits_index; if (mode == STM32_GPIO_MODE_OUT) return GPIOF_OUTPUT; @@ -96,8 +150,12 @@ static int gpio_stm32_probe(struct udevice *dev) { struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); struct stm32_gpio_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args args; + struct clk clk; fdt_addr_t addr; const char *name; + int ret; + int i; addr = dev_read_addr(dev); if (addr == FDT_ADDR_T_NONE) @@ -108,14 +166,25 @@ static int gpio_stm32_probe(struct udevice *dev) if (!name) return -EINVAL; uc_priv->bank_name = name; - uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", - STM32_GPIOS_PER_BANK); - debug("%s, addr = 0x%p, bank_name = %s\n", __func__, (u32 *)priv->regs, - uc_priv->bank_name); -#ifdef CONFIG_CLK - struct clk clk; - int ret; + i = 0; + ret = dev_read_phandle_with_args(dev, "gpio-ranges", + NULL, 3, i, &args); + + while (ret != -ENOENT) { + priv->gpio_range |= GENMASK(args.args[2] + args.args[0] - 1, + args.args[0]); + + uc_priv->gpio_count += args.args[2]; + + ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, + ++i, &args); + } + + dev_dbg(dev, "addr = 0x%p bank_name = %s gpio_count = %d gpio_range = 0x%x\n", + (u32 *)priv->regs, uc_priv->bank_name, uc_priv->gpio_count, + priv->gpio_range); + ret = clk_get_by_index(dev, 0, &clk); if (ret < 0) return ret; @@ -127,7 +196,6 @@ static int gpio_stm32_probe(struct udevice *dev) return ret; } debug("clock enabled for device %s\n", dev->name); -#endif return 0; } diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig new file mode 100644 index 00000000000..96d4f5d6ca3 --- /dev/null +++ b/drivers/hwspinlock/Kconfig @@ -0,0 +1,24 @@ +menu "Hardware Spinlock Support" + +config DM_HWSPINLOCK + bool "Enable U-Boot hardware spinlock support" + help + This option enables U-Boot hardware spinlock support + +config HWSPINLOCK_SANDBOX + bool "Enable Hardware Spinlock support for Sandbox" + depends on SANDBOX && DM_HWSPINLOCK + help + Enable hardware spinlock support in Sandbox. This is a dummy device that + can be probed and support all the methods of HWSPINLOCK, but does not + really do anything. + +config HWSPINLOCK_STM32 + bool "Enable Hardware Spinlock support for STM32" + depends on ARCH_STM32MP && DM_HWSPINLOCK + help + Enable hardware spinlock support in STM32MP. Hardware spinlocks are + hardware mutex which provide a synchronisation mechanism for the + various processors on the SoC. + +endmenu diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile new file mode 100644 index 00000000000..289b12a2566 --- /dev/null +++ b/drivers/hwspinlock/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +# +# Copyright (C) 2018, STMicroelectronics - All Rights Reserved + +obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock-uclass.o +obj-$(CONFIG_HWSPINLOCK_SANDBOX) += sandbox_hwspinlock.o +obj-$(CONFIG_HWSPINLOCK_STM32) += stm32_hwspinlock.o diff --git a/drivers/hwspinlock/hwspinlock-uclass.c b/drivers/hwspinlock/hwspinlock-uclass.c new file mode 100644 index 00000000000..195f079707c --- /dev/null +++ b/drivers/hwspinlock/hwspinlock-uclass.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <dm.h> +#include <errno.h> +#include <hwspinlock.h> +#include <dm/device-internal.h> + +static inline const struct hwspinlock_ops * +hwspinlock_dev_ops(struct udevice *dev) +{ + return (const struct hwspinlock_ops *)dev->driver->ops; +} + +static int hwspinlock_of_xlate_default(struct hwspinlock *hws, + struct ofnode_phandle_args *args) +{ + if (args->args_count > 1) { + debug("Invaild args_count: %d\n", args->args_count); + return -EINVAL; + } + + if (args->args_count) + hws->id = args->args[0]; + else + hws->id = 0; + + return 0; +} + +int hwspinlock_get_by_index(struct udevice *dev, int index, + struct hwspinlock *hws) +{ + int ret; + struct ofnode_phandle_args args; + struct udevice *dev_hws; + const struct hwspinlock_ops *ops; + + assert(hws); + hws->dev = NULL; + + ret = dev_read_phandle_with_args(dev, "hwlocks", "#hwlock-cells", 1, + index, &args); + if (ret) { + dev_dbg(dev, "%s: dev_read_phandle_with_args: err=%d\n", + __func__, ret); + return ret; + } + + ret = uclass_get_device_by_ofnode(UCLASS_HWSPINLOCK, + args.node, &dev_hws); + if (ret) { + dev_dbg(dev, + "%s: uclass_get_device_by_of_offset failed: err=%d\n", + __func__, ret); + return ret; + } + + hws->dev = dev_hws; + + ops = hwspinlock_dev_ops(dev_hws); + + if (ops->of_xlate) + ret = ops->of_xlate(hws, &args); + else + ret = hwspinlock_of_xlate_default(hws, &args); + if (ret) + dev_dbg(dev, "of_xlate() failed: %d\n", ret); + + return ret; +} + +int hwspinlock_lock_timeout(struct hwspinlock *hws, unsigned int timeout) +{ + const struct hwspinlock_ops *ops; + ulong start; + int ret; + + assert(hws); + + if (!hws->dev) + return -EINVAL; + + ops = hwspinlock_dev_ops(hws->dev); + if (!ops->lock) + return -ENOSYS; + + start = get_timer(0); + do { + ret = ops->lock(hws->dev, hws->id); + if (!ret) + return ret; + + if (ops->relax) + ops->relax(hws->dev); + } while (get_timer(start) < timeout); + + return -ETIMEDOUT; +} + +int hwspinlock_unlock(struct hwspinlock *hws) +{ + const struct hwspinlock_ops *ops; + + assert(hws); + + if (!hws->dev) + return -EINVAL; + + ops = hwspinlock_dev_ops(hws->dev); + if (!ops->unlock) + return -ENOSYS; + + return ops->unlock(hws->dev, hws->id); +} + +static int hwspinlock_post_bind(struct udevice *dev) +{ +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + struct hwspinlock_ops *ops = device_get_ops(dev); + static int reloc_done; + + if (!reloc_done) { + if (ops->lock) + ops->lock += gd->reloc_off; + if (ops->unlock) + ops->unlock += gd->reloc_off; + if (ops->relax) + ops->relax += gd->reloc_off; + + reloc_done++; + } +#endif + return 0; +} + +UCLASS_DRIVER(hwspinlock) = { + .id = UCLASS_HWSPINLOCK, + .name = "hwspinlock", + .post_bind = hwspinlock_post_bind, +}; diff --git a/drivers/hwspinlock/sandbox_hwspinlock.c b/drivers/hwspinlock/sandbox_hwspinlock.c new file mode 100644 index 00000000000..be920f5f99d --- /dev/null +++ b/drivers/hwspinlock/sandbox_hwspinlock.c @@ -0,0 +1,56 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <dm.h> +#include <hwspinlock.h> +#include <asm/state.h> + +static int sandbox_lock(struct udevice *dev, int index) +{ + struct sandbox_state *state = state_get_current(); + + if (index != 0) + return -1; + + if (state->hwspinlock) + return -1; + + state->hwspinlock = true; + + return 0; +} + +static int sandbox_unlock(struct udevice *dev, int index) +{ + struct sandbox_state *state = state_get_current(); + + if (index != 0) + return -1; + + if (!state->hwspinlock) + return -1; + + state->hwspinlock = false; + + return 0; +} + +static const struct hwspinlock_ops sandbox_hwspinlock_ops = { + .lock = sandbox_lock, + .unlock = sandbox_unlock, +}; + +static const struct udevice_id sandbox_hwspinlock_ids[] = { + { .compatible = "sandbox,hwspinlock" }, + {} +}; + +U_BOOT_DRIVER(hwspinlock_sandbox) = { + .name = "hwspinlock_sandbox", + .id = UCLASS_HWSPINLOCK, + .of_match = sandbox_hwspinlock_ids, + .ops = &sandbox_hwspinlock_ops, +}; diff --git a/drivers/hwspinlock/stm32_hwspinlock.c b/drivers/hwspinlock/stm32_hwspinlock.c new file mode 100644 index 00000000000..a32bde4906d --- /dev/null +++ b/drivers/hwspinlock/stm32_hwspinlock.c @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <hwspinlock.h> +#include <asm/io.h> + +#define STM32_MUTEX_COREID BIT(8) +#define STM32_MUTEX_LOCK_BIT BIT(31) +#define STM32_MUTEX_NUM_LOCKS 32 + +struct stm32mp1_hws_priv { + fdt_addr_t base; +}; + +static int stm32mp1_lock(struct udevice *dev, int index) +{ + struct stm32mp1_hws_priv *priv = dev_get_priv(dev); + u32 status; + + if (index >= STM32_MUTEX_NUM_LOCKS) + return -EINVAL; + + status = readl(priv->base + index * sizeof(u32)); + if (status == (STM32_MUTEX_LOCK_BIT | STM32_MUTEX_COREID)) + return -EBUSY; + + writel(STM32_MUTEX_LOCK_BIT | STM32_MUTEX_COREID, + priv->base + index * sizeof(u32)); + + status = readl(priv->base + index * sizeof(u32)); + if (status != (STM32_MUTEX_LOCK_BIT | STM32_MUTEX_COREID)) + return -EINVAL; + + return 0; +} + +static int stm32mp1_unlock(struct udevice *dev, int index) +{ + struct stm32mp1_hws_priv *priv = dev_get_priv(dev); + + if (index >= STM32_MUTEX_NUM_LOCKS) + return -EINVAL; + + writel(STM32_MUTEX_COREID, priv->base + index * sizeof(u32)); + + return 0; +} + +static int stm32mp1_hwspinlock_probe(struct udevice *dev) +{ + struct stm32mp1_hws_priv *priv = dev_get_priv(dev); + struct clk clk; + int ret; + + priv->base = dev_read_addr(dev); + if (priv->base == FDT_ADDR_T_NONE) + return -EINVAL; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) + return ret; + + ret = clk_enable(&clk); + if (ret) + clk_free(&clk); + + return ret; +} + +static const struct hwspinlock_ops stm32mp1_hwspinlock_ops = { + .lock = stm32mp1_lock, + .unlock = stm32mp1_unlock, +}; + +static const struct udevice_id stm32mp1_hwspinlock_ids[] = { + { .compatible = "st,stm32-hwspinlock" }, + {} +}; + +U_BOOT_DRIVER(hwspinlock_stm32mp1) = { + .name = "hwspinlock_stm32mp1", + .id = UCLASS_HWSPINLOCK, + .of_match = stm32mp1_hwspinlock_ids, + .ops = &stm32mp1_hwspinlock_ops, + .probe = stm32mp1_hwspinlock_probe, + .priv_auto_alloc_size = sizeof(struct stm32mp1_hws_priv), +}; diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index a9d95fbd747..4f57990d9c4 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -10,7 +10,7 @@ #include <part.h> #include <mmc.h> #include <spi.h> -#include <crc.h> +#include <u-boot/crc.h> #include <linux/crc7.h> #include <asm/byteorder.h> diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c index 37749e01852..a0abb232992 100644 --- a/drivers/net/phy/aquantia.c +++ b/drivers/net/phy/aquantia.c @@ -8,7 +8,7 @@ #include <common.h> #include <dm.h> #include <phy.h> -#include <crc.h> +#include <u-boot/crc.h> #include <malloc.h> #include <asm/byteorder.h> #include <fs.h> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 14d82b93ed1..3921e39d7bc 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -155,4 +155,13 @@ config MSM8916_USB_PHY This PHY is found on qualcomm dragonboard410c development board. +config OMAP_USB2_PHY + bool "Support OMAP's USB2 PHY" + depends on PHY + depends on SYSCON + help + Support for the OMAP's USB2 PHY. + + This PHY is found on OMAP devices supporting USB2. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 8030d599e75..53dd5bd0f77 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -17,3 +17,4 @@ obj-$(CONFIG_PHY_RCAR_GEN3) += phy-rcar-gen3.o obj-$(CONFIG_PHY_STM32_USBPHYC) += phy-stm32-usbphyc.o obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o +obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o diff --git a/drivers/phy/omap-usb2-phy.c b/drivers/phy/omap-usb2-phy.c new file mode 100644 index 00000000000..fd20e8c1688 --- /dev/null +++ b/drivers/phy/omap-usb2-phy.c @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * OMAP USB2 PHY LAYER + * + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <errno.h> +#include <generic-phy.h> +#include <regmap.h> +#include <syscon.h> + +#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(0) + +#define OMAP_DEV_PHY_PD BIT(0) +#define OMAP_USB2_PHY_PD BIT(28) + +#define USB2PHY_DISCON_BYP_LATCH BIT(31) +#define USB2PHY_ANA_CONFIG1 (0x4c) + +DECLARE_GLOBAL_DATA_PTR; + +struct omap_usb2_phy { + struct regmap *pwr_regmap; + ulong flags; + void *phy_base; + u32 pwr_reg_offset; +}; + +struct usb_phy_data { + const char *label; + u8 flags; + u32 mask; + u32 power_on; + u32 power_off; +}; + +static const struct usb_phy_data omap5_usb2_data = { + .label = "omap5_usb2", + .flags = 0, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_data = { + .label = "dra7x_usb2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_DEV_PHY_PD, + .power_off = OMAP_DEV_PHY_PD, +}; + +static const struct usb_phy_data dra7x_usb2_phy2_data = { + .label = "dra7x_usb2_phy2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, + .mask = OMAP_USB2_PHY_PD, + .power_off = OMAP_USB2_PHY_PD, +}; + +static const struct udevice_id omap_usb2_id_table[] = { + { + .compatible = "ti,omap5-usb2", + .data = (ulong)&omap5_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2", + .data = (ulong)&dra7x_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2-phy2", + .data = (ulong)&dra7x_usb2_phy2_data, + }, + {}, +}; + +static int omap_usb_phy_power(struct phy *usb_phy, bool on) +{ + struct udevice *dev = usb_phy->dev; + const struct usb_phy_data *data; + const struct omap_usb2_phy *phy = dev_get_priv(dev); + u32 val; + int rc; + + data = (const struct usb_phy_data *)dev_get_driver_data(dev); + if (!data) + return -EINVAL; + + rc = regmap_read(phy->pwr_regmap, phy->pwr_reg_offset, &val); + if (rc) + return rc; + val &= ~data->mask; + if (on) + val |= data->power_on; + else + val |= data->power_off; + rc = regmap_write(phy->pwr_regmap, phy->pwr_reg_offset, val); + if (rc) + return rc; + + return 0; +} + +static int omap_usb2_phy_init(struct phy *usb_phy) +{ + struct udevice *dev = usb_phy->dev; + struct omap_usb2_phy *priv = dev_get_priv(dev); + u32 val; + + if (priv->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + /* + * + * Reduce the sensitivity of internal PHY by enabling the + * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This + * resolves issues with certain devices which can otherwise + * be prone to false disconnects. + * + */ + val = readl(priv->phy_base + USB2PHY_ANA_CONFIG1); + val |= USB2PHY_DISCON_BYP_LATCH; + writel(val, priv->phy_base + USB2PHY_ANA_CONFIG1); + } + + return 0; +} + +static int omap_usb2_phy_power_on(struct phy *usb_phy) +{ + return omap_usb_phy_power(usb_phy, true); +} + +static int omap_usb2_phy_power_off(struct phy *usb_phy) +{ + return omap_usb_phy_power(usb_phy, false); +} + +static int omap_usb2_phy_exit(struct phy *usb_phy) +{ + return omap_usb_phy_power(usb_phy, false); +} + +struct phy_ops omap_usb2_phy_ops = { + .init = omap_usb2_phy_init, + .power_on = omap_usb2_phy_power_on, + .power_off = omap_usb2_phy_power_off, + .exit = omap_usb2_phy_exit, +}; + +int omap_usb2_phy_probe(struct udevice *dev) +{ + int rc; + struct regmap *regmap; + struct omap_usb2_phy *priv = dev_get_priv(dev); + const struct usb_phy_data *data; + u32 tmp[2]; + + data = (const struct usb_phy_data *)dev_get_driver_data(dev); + if (!data) + return -EINVAL; + + if (data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + u32 base = dev_read_addr(dev); + + if (base == FDT_ADDR_T_NONE) + return -EINVAL; + priv->phy_base = (void *)base; + priv->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; + } + + regmap = syscon_regmap_lookup_by_phandle(dev, "syscon-phy-power"); + if (IS_ERR(regmap)) { + printf("can't get regmap (err %ld)\n", PTR_ERR(regmap)); + return PTR_ERR(regmap); + } + priv->pwr_regmap = regmap; + + rc = dev_read_u32_array(dev, "syscon-phy-power", tmp, 2); + if (rc) { + printf("couldn't get power reg. offset (err %d)\n", rc); + return rc; + } + priv->pwr_reg_offset = tmp[1]; + + return 0; +} + +U_BOOT_DRIVER(omap_usb2_phy) = { + .name = "omap_usb2_phy", + .id = UCLASS_PHY, + .of_match = omap_usb2_id_table, + .probe = omap_usb2_phy_probe, + .ops = &omap_usb2_phy_ops, + .priv_auto_alloc_size = sizeof(struct omap_usb2_phy), +}; diff --git a/drivers/phy/ti-pipe3-phy.c b/drivers/phy/ti-pipe3-phy.c index b22bbaf9851..e7e78e3c56d 100644 --- a/drivers/phy/ti-pipe3-phy.c +++ b/drivers/phy/ti-pipe3-phy.c @@ -141,7 +141,7 @@ static int omap_pipe3_dpll_program(struct omap_pipe3 *pipe3) omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val); val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; + val &= ~(PLL_SELFREQDCO_MASK | PLL_IDLE); val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val); @@ -265,10 +265,13 @@ static int pipe3_exit(struct phy *phy) return -EBUSY; } - val = readl(pipe3->pll_reset_reg); - writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); - mdelay(1); - writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + if (pipe3->pll_reset_reg) { + val = readl(pipe3->pll_reset_reg); + writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + mdelay(1); + writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg); + } + return 0; } @@ -331,9 +334,11 @@ static int pipe3_phy_probe(struct udevice *dev) if (!pipe3->power_reg) return -EINVAL; - pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset"); - if (!pipe3->pll_reset_reg) - return -EINVAL; + if (device_is_compatible(dev, "ti,phy-pipe3-sata")) { + pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset"); + if (!pipe3->pll_reset_reg) + return -EINVAL; + } pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev); @@ -350,8 +355,19 @@ static struct pipe3_dpll_map dpll_map_sata[] = { { }, /* Terminator */ }; +static struct pipe3_dpll_map dpll_map_usb[] = { + {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ + {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ + {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ + {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ + {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ + {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + static const struct udevice_id pipe3_phy_ids[] = { { .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata }, + { .compatible = "ti,omap-usb3", .data = (ulong)&dpll_map_usb}, { } }; diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg.c b/drivers/pinctrl/meson/pinctrl-meson-axg.c index a54fbce910a..3bbbe817b4a 100644 --- a/drivers/pinctrl/meson/pinctrl-meson-axg.c +++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c @@ -14,7 +14,7 @@ #include "pinctrl-meson-axg.h" -#define EE_OFF 14 +#define EE_OFF 15 /* emmc */ static const unsigned int emmc_nand_d0_pins[] = {BOOT_0}; @@ -893,17 +893,17 @@ static struct meson_pmx_func meson_axg_aobus_functions[] = { }; static struct meson_bank meson_axg_periphs_banks[] = { - /* name first last pullen pull dir out in */ - BANK("Z", GPIOZ_0, GPIOZ_10, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0), - BANK("BOOT", BOOT_0, BOOT_14, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0), - BANK("A", GPIOA_0, GPIOA_20, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0), - BANK("X", GPIOX_0, GPIOX_22, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0), - BANK("Y", GPIOY_0, GPIOY_15, 1, 0, 1, 0, 3, 0, 4, 0, 5, 0), + /* name first last pullen pull dir out in */ + BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_10, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0), + BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_14, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0), + BANK("A", PIN(GPIOA_0, EE_OFF), PIN(GPIOA_20, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0), + BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0), + BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_15, EE_OFF), 1, 0, 1, 0, 3, 0, 4, 0, 5, 0), }; static struct meson_bank meson_axg_aobus_banks[] = { - /* name first last pullen pull dir out in */ - BANK("AO", GPIOAO_0, GPIOAO_13, 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), + /* name first last pullen pull dir out in */ + BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 16, 0, 0, 0, 0, 0, 16, 1, 0), }; static struct meson_pmx_bank meson_axg_periphs_pmx_banks[] = { @@ -931,11 +931,11 @@ static struct meson_axg_pmx_data meson_axg_aobus_pmx_banks_data = { struct meson_pinctrl_data meson_axg_periphs_pinctrl_data = { .name = "periphs-banks", - .pin_base = 11, + .pin_base = 15, .groups = meson_axg_periphs_groups, .funcs = meson_axg_periphs_functions, .banks = meson_axg_periphs_banks, - .num_pins = 100, + .num_pins = 86, .num_groups = ARRAY_SIZE(meson_axg_periphs_groups), .num_funcs = ARRAY_SIZE(meson_axg_periphs_functions), .num_banks = ARRAY_SIZE(meson_axg_periphs_banks), diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c index 0bd6152803d..b539749752c 100644 --- a/drivers/pinctrl/meson/pinctrl-meson.c +++ b/drivers/pinctrl/meson/pinctrl-meson.c @@ -136,7 +136,7 @@ int meson_gpio_direction_input(struct udevice *dev, unsigned int offset) if (ret) return ret; - clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 1); + setbits_le32(priv->reg_gpio + reg, BIT(bit)); return 0; } @@ -152,7 +152,7 @@ int meson_gpio_direction_output(struct udevice *dev, if (ret) return ret; - clrsetbits_le32(priv->reg_gpio + reg, BIT(bit), 0); + clrbits_le32(priv->reg_gpio + reg, BIT(bit)); ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_OUT, ®, &bit); if (ret) diff --git a/drivers/pinctrl/pinctrl_stm32.c b/drivers/pinctrl/pinctrl_stm32.c index 6d4117d941f..24affe0414c 100644 --- a/drivers/pinctrl/pinctrl_stm32.c +++ b/drivers/pinctrl/pinctrl_stm32.c @@ -1,6 +1,7 @@ #include <common.h> #include <dm.h> #include <dm/pinctrl.h> +#include <hwspinlock.h> #include <asm/arch/gpio.h> #include <asm/gpio.h> #include <asm/io.h> @@ -14,8 +15,8 @@ DECLARE_GLOBAL_DATA_PTR; #define OTYPE_MSK 1 #define AFR_MASK 0xF -#ifndef CONFIG_SPL_BUILD struct stm32_pinctrl_priv { + struct hwspinlock hws; int pinctrl_ngpios; struct list_head gpio_dev; }; @@ -25,7 +26,7 @@ struct stm32_gpio_bank { struct list_head list; }; -#define MAX_PIN_PER_BANK 16 +#ifndef CONFIG_SPL_BUILD static char pin_name[PINNAME_SIZE]; #define PINMUX_MODE_COUNT 5 @@ -51,6 +52,39 @@ static int stm32_pinctrl_get_af(struct udevice *dev, unsigned int offset) return af; } +static int stm32_populate_gpio_dev_list(struct udevice *dev) +{ + struct stm32_pinctrl_priv *priv = dev_get_priv(dev); + struct udevice *gpio_dev; + struct udevice *child; + struct stm32_gpio_bank *gpio_bank; + int ret; + + /* + * parse pin-controller sub-nodes (ie gpio bank nodes) and fill + * a list with all gpio device reference which belongs to the + * current pin-controller. This list is used to find pin_name and + * pin muxing + */ + list_for_each_entry(child, &dev->child_head, sibling_node) { + ret = uclass_get_device_by_name(UCLASS_GPIO, child->name, + &gpio_dev); + if (ret < 0) + continue; + + gpio_bank = malloc(sizeof(*gpio_bank)); + if (!gpio_bank) { + dev_err(dev, "Not enough memory\n"); + return -ENOMEM; + } + + gpio_bank->gpio_dev = gpio_dev; + list_add_tail(&gpio_bank->list, &priv->gpio_dev); + } + + return 0; +} + static int stm32_pinctrl_get_pins_count(struct udevice *dev) { struct stm32_pinctrl_priv *priv = dev_get_priv(dev); @@ -64,6 +98,8 @@ static int stm32_pinctrl_get_pins_count(struct udevice *dev) if (priv->pinctrl_ngpios) return priv->pinctrl_ngpios; + if (list_empty(&priv->gpio_dev)) + stm32_populate_gpio_dev_list(dev); /* * walk through all banks to retrieve the pin-controller * pins number @@ -78,22 +114,34 @@ static int stm32_pinctrl_get_pins_count(struct udevice *dev) } static struct udevice *stm32_pinctrl_get_gpio_dev(struct udevice *dev, - unsigned int selector) + unsigned int selector, + unsigned int *idx) { struct stm32_pinctrl_priv *priv = dev_get_priv(dev); struct stm32_gpio_bank *gpio_bank; struct gpio_dev_priv *uc_priv; - int first_pin = 0; + int pin_count = 0; + + if (list_empty(&priv->gpio_dev)) + stm32_populate_gpio_dev_list(dev); /* look up for the bank which owns the requested pin */ list_for_each_entry(gpio_bank, &priv->gpio_dev, list) { uc_priv = dev_get_uclass_priv(gpio_bank->gpio_dev); - if (selector < (first_pin + uc_priv->gpio_count)) - /* we found the bank */ - return gpio_bank->gpio_dev; + if (selector < (pin_count + uc_priv->gpio_count)) { + /* + * we found the bank, convert pin selector to + * gpio bank index + */ + *idx = stm32_offset_to_index(gpio_bank->gpio_dev, + selector - pin_count); + if (*idx < 0) + return NULL; - first_pin += uc_priv->gpio_count; + return gpio_bank->gpio_dev; + } + pin_count += uc_priv->gpio_count; } return NULL; @@ -104,9 +152,10 @@ static const char *stm32_pinctrl_get_pin_name(struct udevice *dev, { struct gpio_dev_priv *uc_priv; struct udevice *gpio_dev; + unsigned int gpio_idx; /* look up for the bank which owns the requested pin */ - gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); + gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector, &gpio_idx); if (!gpio_dev) { snprintf(pin_name, PINNAME_SIZE, "Error"); } else { @@ -114,7 +163,7 @@ static const char *stm32_pinctrl_get_pin_name(struct udevice *dev, snprintf(pin_name, PINNAME_SIZE, "%s%d", uc_priv->bank_name, - selector % MAX_PIN_PER_BANK); + gpio_idx); } return pin_name; @@ -127,23 +176,21 @@ static int stm32_pinctrl_get_pin_muxing(struct udevice *dev, { struct udevice *gpio_dev; const char *label; - int gpio_pin; int mode; int af_num; + unsigned int gpio_idx; /* look up for the bank which owns the requested pin */ - gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector); + gpio_dev = stm32_pinctrl_get_gpio_dev(dev, selector, &gpio_idx); if (!gpio_dev) return -ENODEV; - /* translate pin-controller pin number to gpio pin number */ - gpio_pin = selector % MAX_PIN_PER_BANK; + mode = gpio_get_raw_function(gpio_dev, gpio_idx, &label); - mode = gpio_get_raw_function(gpio_dev, gpio_pin, &label); + dev_dbg(dev, "selector = %d gpio_idx = %d mode = %d\n", + selector, gpio_idx, mode); - dev_dbg(dev, "selector = %d gpio_pin = %d mode = %d\n", - selector, gpio_pin, mode); switch (mode) { case GPIOF_UNKNOWN: @@ -153,7 +200,7 @@ static int stm32_pinctrl_get_pin_muxing(struct udevice *dev, snprintf(buf, size, "%s", pinmux_mode[mode]); break; case GPIOF_FUNC: - af_num = stm32_pinctrl_get_af(gpio_dev, gpio_pin); + af_num = stm32_pinctrl_get_af(gpio_dev, gpio_idx); snprintf(buf, size, "%s %d", pinmux_mode[mode], af_num); break; case GPIOF_OUTPUT: @@ -166,53 +213,44 @@ static int stm32_pinctrl_get_pin_muxing(struct udevice *dev, return 0; } +#endif + int stm32_pinctrl_probe(struct udevice *dev) { struct stm32_pinctrl_priv *priv = dev_get_priv(dev); - struct udevice *gpio_dev; - struct udevice *child; - struct stm32_gpio_bank *gpio_bank; int ret; INIT_LIST_HEAD(&priv->gpio_dev); - /* - * parse pin-controller sub-nodes (ie gpio bank nodes) and fill - * a list with all gpio device reference which belongs to the - * current pin-controller. This list is used to find pin_name and - * pin muxing - */ - list_for_each_entry(child, &dev->child_head, sibling_node) { - ret = uclass_get_device_by_name(UCLASS_GPIO, child->name, - &gpio_dev); - if (ret < 0) - continue; - - gpio_bank = malloc(sizeof(*gpio_bank)); - if (!gpio_bank) { - dev_err(dev, "Not enough memory\n"); - return -ENOMEM; - } - - gpio_bank->gpio_dev = gpio_dev; - list_add_tail(&gpio_bank->list, &priv->gpio_dev); - } + /* hwspinlock property is optional, just log the error */ + ret = hwspinlock_get_by_index(dev, 0, &priv->hws); + if (ret) + debug("%s: hwspinlock_get_by_index may have failed (%d)\n", + __func__, ret); return 0; } -#endif static int stm32_gpio_config(struct gpio_desc *desc, const struct stm32_gpio_ctl *ctl) { struct stm32_gpio_priv *priv = dev_get_priv(desc->dev); struct stm32_gpio_regs *regs = priv->regs; + struct stm32_pinctrl_priv *ctrl_priv; + int ret; u32 index; if (!ctl || ctl->af > 15 || ctl->mode > 3 || ctl->otype > 1 || ctl->pupd > 2 || ctl->speed > 3) return -EINVAL; + ctrl_priv = dev_get_priv(dev_get_parent(desc->dev)); + ret = hwspinlock_lock_timeout(&ctrl_priv->hws, 10); + if (ret == -ETIME) { + dev_err(desc->dev, "HWSpinlock timeout\n"); + return ret; + } + index = (desc->offset & 0x07) * 4; clrsetbits_le32(®s->afr[desc->offset >> 3], AFR_MASK << index, ctl->af << index); @@ -227,6 +265,8 @@ static int stm32_gpio_config(struct gpio_desc *desc, index = desc->offset; clrsetbits_le32(®s->otyper, OTYPE_MSK << index, ctl->otype << index); + hwspinlock_unlock(&ctrl_priv->hws); + return 0; } @@ -393,8 +433,6 @@ U_BOOT_DRIVER(pinctrl_stm32) = { .of_match = stm32_pinctrl_ids, .ops = &stm32_pinctrl_ops, .bind = dm_scan_fdt_dev, -#ifndef CONFIG_SPL_BUILD .probe = stm32_pinctrl_probe, .priv_auto_alloc_size = sizeof(struct stm32_pinctrl_priv), -#endif }; diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1a3852442a8..9495dca33b9 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -197,6 +197,49 @@ config AXP_ALDO3_VOLT On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be 3.0V. +choice + prompt "axp pmic (a)ldo3 voltage rate control" + depends on AXP209_POWER + default AXP_ALDO3_VOLT_SLOPE_NONE + ---help--- + The AXP can slowly ramp up voltage to reduce the inrush current when + changing voltages. + Note, this does not apply when enabling/disabling LDO3. See + "axp pmic (a)ldo3 inrush quirk" below to enable a slew rate to limit + inrush current on broken board designs. + +config AXP_ALDO3_VOLT_SLOPE_NONE + bool "No voltage slope" + ---help--- + Tries to reach the next voltage setting near instantaneously. Measurements + indicate that this is about 0.0167 V/uS. + +config AXP_ALDO3_VOLT_SLOPE_16 + bool "1.6 mV per uS" + ---help--- + Increases the voltage by 1.6 mV per uS until the final voltage has + been reached. Note that the scaling is in 25 mV steps and thus + the slew rate in reality is about 25 mV/31.250 uS. + +config AXP_ALDO3_VOLT_SLOPE_08 + bool "0.8 mV per uS" + ---help--- + Increases the voltage by 0.8 mV per uS until the final voltage has + been reached. Note that the scaling is in 25 mV steps however and thus + the slew rate in reality is about 25 mV/15.625 uS. + This is the slowest supported rate. + +endchoice + +config AXP_ALDO3_INRUSH_QUIRK + bool "axp pmic (a)ldo3 inrush quirk" + depends on AXP209_POWER + default n + ---help--- + The reference design denotes a value of 4.7 uF for the output capacitor + of LDO3. Some boards have too high capacitance causing an inrush current + and resulting an AXP209 shutdown. + config AXP_ALDO4_VOLT int "axp pmic (a)ldo4 voltage" depends on AXP209_POWER diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c index 6de5ec68258..67b420910c9 100644 --- a/drivers/power/axp209.c +++ b/drivers/power/axp209.c @@ -9,6 +9,16 @@ #include <asm/arch/pmic_bus.h> #include <axp_pmic.h> +#ifdef CONFIG_AXP_ALDO3_VOLT_SLOPE_08 +# define AXP209_VRC_SLOPE AXP209_VRC_LDO3_800uV_uS +#endif +#ifdef CONFIG_AXP_ALDO3_VOLT_SLOPE_16 +# define AXP209_VRC_SLOPE AXP209_VRC_LDO3_1600uV_uS +#endif +#if defined CONFIG_AXP_ALDO3_VOLT_SLOPE_NONE || !defined AXP209_VRC_SLOPE +# define AXP209_VRC_SLOPE 0x00 +#endif + static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div) { if (mvolt < min) @@ -81,8 +91,7 @@ int axp_set_aldo2(unsigned int mvolt) if (rc) return rc; - /* LDO2 configuration is in upper 4 bits */ - reg = (reg & 0x0f) | (cfg << 4); + reg |= AXP209_LDO24_LDO2_SET(reg, cfg); rc = pmic_bus_write(AXP209_LDO24_VOLTAGE, reg); if (rc) return rc; @@ -99,10 +108,49 @@ int axp_set_aldo3(unsigned int mvolt) return pmic_bus_clrbits(AXP209_OUTPUT_CTRL, AXP209_OUTPUT_CTRL_LDO3); - if (mvolt == -1) - cfg = 0x80; /* determined by LDO3IN pin */ - else + /* + * Some boards have trouble reaching the target voltage without causing + * great inrush currents. To prevent this, boards can enable a certain + * slope to ramp up voltage. Note, this only works when changing an + * already active power rail. When toggling power on, the AXP ramps up + * steeply at 0.0167 V/uS. + */ + rc = pmic_bus_read(AXP209_VRC_DCDC2_LDO3, &cfg); + cfg = AXP209_VRC_LDO3_SLOPE_SET(cfg, AXP209_VRC_SLOPE); + rc |= pmic_bus_write(AXP209_VRC_DCDC2_LDO3, cfg); + + if (rc) + return rc; + +#ifdef CONFIG_AXP_ALDO3_INRUSH_QUIRK + /* + * On some boards, LDO3 has a too big capacitor installed. When + * turning on LDO3, this causes the AXP209 to shutdown on + * voltages over 1.9 volt. As a workaround, we enable LDO3 + * first with the lowest possible voltage. If this still causes + * high inrush currents, the voltage slope should be increased. + */ + rc = pmic_bus_read(AXP209_OUTPUT_CTRL, &cfg); + if (rc) + return rc; + + if (!(cfg & AXP209_OUTPUT_CTRL_LDO3)) { + rc = pmic_bus_write(AXP209_LDO3_VOLTAGE, 0x0); /* 0.7 Volt */ + mdelay(1); + rc |= pmic_bus_setbits(AXP209_OUTPUT_CTRL, + AXP209_OUTPUT_CTRL_LDO3); + + if (rc) + return rc; + } +#endif + + if (mvolt == -1) { + cfg = AXP209_LDO3_VOLTAGE_FROM_LDO3IN; + } else { cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25); + cfg = AXP209_LDO3_VOLTAGE_SET(cfg); + } rc = pmic_bus_write(AXP209_LDO3_VOLTAGE, cfg); if (rc) @@ -131,8 +179,7 @@ int axp_set_aldo4(unsigned int mvolt) if (rc) return rc; - /* LDO4 configuration is in lower 4 bits */ - reg = (reg & 0xf0) | (cfg << 0); + reg |= AXP209_LDO24_LDO4_SET(reg, cfg); rc = pmic_bus_write(AXP209_LDO24_VOLTAGE, reg); if (rc) return rc; @@ -153,10 +200,7 @@ int axp_init(void) if (rc) return rc; - /* Low 4 bits is chip version */ - ver &= 0x0f; - - if (ver != 0x1) + if ((ver & AXP209_CHIP_VERSION_MASK) != 0x1) return -EINVAL; /* Mask all interrupts */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3bcc61e7312..6252dd8c4b5 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -506,16 +506,10 @@ config BCM283X_PL011_SERIAL config BCM6345_SERIAL bool "Support for BCM6345 UART" - depends on DM_SERIAL && ARCH_BMIPS + depends on DM_SERIAL help Select this to enable UART on BCM6345 SoCs. -config BCM6858_SERIAL - bool "Support for BCM6858 UART" - depends on DM_SERIAL && ARCH_BCM6858 - help - Select this to enable UART on BCM6358 SoCs. - config FSL_LINFLEXUART bool "Freescale Linflex UART support" depends on DM_SERIAL diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index b6377b10768..2f8d065a4c2 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_AR933X_UART) += serial_ar933x.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o obj-$(CONFIG_BCM6345_SERIAL) += serial_bcm6345.o -obj-$(CONFIG_BCM6858_SERIAL) += serial_bcm6858.o obj-$(CONFIG_EFI_APP) += serial_efi.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o diff --git a/drivers/serial/serial_bcm6345.c b/drivers/serial/serial_bcm6345.c index a0e709a11e9..9ad8c770d51 100644 --- a/drivers/serial/serial_bcm6345.c +++ b/drivers/serial/serial_bcm6345.c @@ -89,26 +89,26 @@ struct bcm6345_serial_priv { /* enable rx & tx operation on uart */ static void bcm6345_serial_enable(void __iomem *base) { - setbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + setbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | + UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); } /* disable rx & tx operation on uart */ static void bcm6345_serial_disable(void __iomem *base) { - clrbits_be32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); + clrbits_32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | + UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); } /* clear all unread data in rx fifo and unsent data in tx fifo */ static void bcm6345_serial_flush(void __iomem *base) { /* empty rx and tx fifo */ - setbits_be32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK | - UART_CTL_RSTTXFIFO_MASK); + setbits_32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK | + UART_CTL_RSTTXFIFO_MASK); /* read any pending char to make sure all irq status are cleared */ - readl_be(base + UART_FIFO_REG); + readl(base + UART_FIFO_REG); } static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate) @@ -120,40 +120,40 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate) bcm6345_serial_flush(base); /* set uart control config */ - clrsetbits_be32(base + UART_CTL_REG, - /* clear rx timeout */ - UART_CTL_RXTIMEOUT_MASK | - /* clear stop bits */ - UART_CTL_STOPBITS_MASK | - /* clear bits per symbol */ - UART_CTL_BITSPERSYM_MASK | - /* clear xmit break */ - UART_CTL_XMITBRK_MASK | - /* clear reserved bit */ - UART_CTL_RSVD_MASK | - /* disable parity */ - UART_CTL_RXPAREN_MASK | - UART_CTL_TXPAREN_MASK | - /* disable loopback */ - UART_CTL_LOOPBACK_MASK, - /* set timeout to 5 */ - UART_CTL_RXTIMEOUT_5 | - /* set 8 bits/symbol */ - UART_CTL_BITSPERSYM_8 | - /* set 1 stop bit */ - UART_CTL_STOPBITS_1 | - /* set parity to even */ - UART_CTL_RXPAREVEN_MASK | - UART_CTL_TXPAREVEN_MASK); + clrsetbits_32(base + UART_CTL_REG, + /* clear rx timeout */ + UART_CTL_RXTIMEOUT_MASK | + /* clear stop bits */ + UART_CTL_STOPBITS_MASK | + /* clear bits per symbol */ + UART_CTL_BITSPERSYM_MASK | + /* clear xmit break */ + UART_CTL_XMITBRK_MASK | + /* clear reserved bit */ + UART_CTL_RSVD_MASK | + /* disable parity */ + UART_CTL_RXPAREN_MASK | + UART_CTL_TXPAREN_MASK | + /* disable loopback */ + UART_CTL_LOOPBACK_MASK, + /* set timeout to 5 */ + UART_CTL_RXTIMEOUT_5 | + /* set 8 bits/symbol */ + UART_CTL_BITSPERSYM_8 | + /* set 1 stop bit */ + UART_CTL_STOPBITS_1 | + /* set parity to even */ + UART_CTL_RXPAREVEN_MASK | + UART_CTL_TXPAREVEN_MASK); /* set uart fifo config */ - clrsetbits_be32(base + UART_FIFO_CFG_REG, - /* clear fifo config */ - UART_FIFO_CFG_RX_MASK | - UART_FIFO_CFG_TX_MASK, - /* set fifo config to 4 */ - UART_FIFO_CFG_RX_4 | - UART_FIFO_CFG_TX_4); + clrsetbits_32(base + UART_FIFO_CFG_REG, + /* clear fifo config */ + UART_FIFO_CFG_RX_MASK | + UART_FIFO_CFG_TX_MASK, + /* set fifo config to 4 */ + UART_FIFO_CFG_RX_4 | + UART_FIFO_CFG_TX_4); /* set baud rate */ val = ((clk / baudrate) >> 4); @@ -161,10 +161,10 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate) val = (val >> 1); else val = (val >> 1) - 1; - writel_be(val, base + UART_BAUD_REG); + writel(val, base + UART_BAUD_REG); /* clear interrupts */ - writel_be(0, base + UART_IR_REG); + writel(0, base + UART_IR_REG); /* enable uart */ bcm6345_serial_enable(base); @@ -175,7 +175,7 @@ static int bcm6345_serial_init(void __iomem *base, ulong clk, u32 baudrate) static int bcm6345_serial_pending(struct udevice *dev, bool input) { struct bcm6345_serial_priv *priv = dev_get_priv(dev); - u32 val = readl_be(priv->base + UART_IR_REG); + u32 val = readl(priv->base + UART_IR_REG); if (input) return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)); @@ -195,11 +195,11 @@ static int bcm6345_serial_putc(struct udevice *dev, const char ch) struct bcm6345_serial_priv *priv = dev_get_priv(dev); u32 val; - val = readl_be(priv->base + UART_IR_REG); + val = readl(priv->base + UART_IR_REG); if (!(val & UART_IR_STAT(UART_IR_TXEMPTY))) return -EAGAIN; - writel_be(ch, priv->base + UART_FIFO_REG); + writel(ch, priv->base + UART_FIFO_REG); return 0; } @@ -209,14 +209,13 @@ static int bcm6345_serial_getc(struct udevice *dev) struct bcm6345_serial_priv *priv = dev_get_priv(dev); u32 val; - val = readl_be(priv->base + UART_IR_REG); + val = readl(priv->base + UART_IR_REG); if (val & UART_IR_STAT(UART_IR_RXOVER)) - setbits_be32(priv->base + UART_CTL_REG, - UART_CTL_RSTRXFIFO_MASK); + setbits_32(priv->base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK); if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY))) return -EAGAIN; - val = readl_be(priv->base + UART_FIFO_REG); + val = readl(priv->base + UART_FIFO_REG); if (val & UART_FIFO_ANYERR_MASK) return -EAGAIN; @@ -277,7 +276,7 @@ static inline void _debug_uart_init(void) static inline void wait_xfered(void __iomem *base) { do { - u32 val = readl_be(base + UART_IR_REG); + u32 val = readl(base + UART_IR_REG); if (val & UART_IR_STAT(UART_IR_TXEMPTY)) break; } while (1); @@ -288,7 +287,7 @@ static inline void _debug_uart_putc(int ch) void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; wait_xfered(base); - writel_be(ch, base + UART_FIFO_REG); + writel(ch, base + UART_FIFO_REG); wait_xfered(base); } diff --git a/drivers/serial/serial_bcm6858.c b/drivers/serial/serial_bcm6858.c deleted file mode 100644 index 8aa37055f0b..00000000000 --- a/drivers/serial/serial_bcm6858.c +++ /dev/null @@ -1,300 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com> - * - * Derived from linux/drivers/tty/serial/bcm63xx_uart.c: - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * Derived from linux/drivers/tty/serial/serial_bcm6345.c - * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> - */ - -#include <clk.h> -#include <dm.h> -#include <debug_uart.h> -#include <errno.h> -#include <serial.h> -#include <asm/io.h> -#include <asm/types.h> - -/* UART Control register */ -#define UART_CTL_REG 0x0 -#define UART_CTL_RXTIMEOUT_MASK 0x1f -#define UART_CTL_RXTIMEOUT_5 0x5 -#define UART_CTL_RSTRXFIFO_SHIFT 6 -#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) -#define UART_CTL_RSTTXFIFO_SHIFT 7 -#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) -#define UART_CTL_STOPBITS_SHIFT 8 -#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_BITSPERSYM_SHIFT 12 -#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) -#define UART_CTL_BITSPERSYM_8 (0x3 << UART_CTL_BITSPERSYM_SHIFT) -#define UART_CTL_XMITBRK_SHIFT 14 -#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) -#define UART_CTL_RSVD_SHIFT 15 -#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) -#define UART_CTL_RXPAREVEN_SHIFT 16 -#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) -#define UART_CTL_RXPAREN_SHIFT 17 -#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) -#define UART_CTL_TXPAREVEN_SHIFT 18 -#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) -#define UART_CTL_TXPAREN_SHIFT 19 -#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) -#define UART_CTL_LOOPBACK_SHIFT 20 -#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) -#define UART_CTL_RXEN_SHIFT 21 -#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) -#define UART_CTL_TXEN_SHIFT 22 -#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) -#define UART_CTL_BRGEN_SHIFT 23 -#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) - -/* UART Baudword register */ -#define UART_BAUD_REG 0x4 - -/* UART FIFO Config register */ -#define UART_FIFO_CFG_REG 0x8 -#define UART_FIFO_CFG_RX_SHIFT 8 -#define UART_FIFO_CFG_RX_MASK (0xf << UART_FIFO_CFG_RX_SHIFT) -#define UART_FIFO_CFG_RX_4 (0x4 << UART_FIFO_CFG_RX_SHIFT) -#define UART_FIFO_CFG_TX_SHIFT 12 -#define UART_FIFO_CFG_TX_MASK (0xf << UART_FIFO_CFG_TX_SHIFT) -#define UART_FIFO_CFG_TX_4 (0x4 << UART_FIFO_CFG_TX_SHIFT) - -/* UART Interrupt register */ -#define UART_IR_REG 0x10 -#define UART_IR_STAT(x) (1 << (x)) -#define UART_IR_TXEMPTY 5 -#define UART_IR_RXOVER 7 -#define UART_IR_RXNOTEMPTY 11 - -/* UART FIFO register */ -#define UART_FIFO_REG 0x14 -#define UART_FIFO_VALID_MASK 0xff -#define UART_FIFO_FRAMEERR_SHIFT 8 -#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) -#define UART_FIFO_PARERR_SHIFT 9 -#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) -#define UART_FIFO_BRKDET_SHIFT 10 -#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) -#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ - UART_FIFO_PARERR_MASK | \ - UART_FIFO_BRKDET_MASK) - -struct bcm6858_serial_priv { - void __iomem *base; - ulong uartclk; -}; - -/* enable rx & tx operation on uart */ -static void bcm6858_serial_enable(void __iomem *base) -{ - setbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); -} - -/* disable rx & tx operation on uart */ -static void bcm6858_serial_disable(void __iomem *base) -{ - clrbits_le32(base + UART_CTL_REG, UART_CTL_BRGEN_MASK | - UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); -} - -/* clear all unread data in rx fifo and unsent data in tx fifo */ -static void bcm6858_serial_flush(void __iomem *base) -{ - /* empty rx and tx fifo */ - setbits_le32(base + UART_CTL_REG, UART_CTL_RSTRXFIFO_MASK | - UART_CTL_RSTTXFIFO_MASK); - - /* read any pending char to make sure all irq status are cleared */ - readl(base + UART_FIFO_REG); -} - -static int bcm6858_serial_init(void __iomem *base, ulong clk, u32 baudrate) -{ - u32 val; - - /* mask all irq and flush port */ - bcm6858_serial_disable(base); - bcm6858_serial_flush(base); - - /* set uart control config */ - clrsetbits_le32(base + UART_CTL_REG, - /* clear rx timeout */ - UART_CTL_RXTIMEOUT_MASK | - /* clear stop bits */ - UART_CTL_STOPBITS_MASK | - /* clear bits per symbol */ - UART_CTL_BITSPERSYM_MASK | - /* clear xmit break */ - UART_CTL_XMITBRK_MASK | - /* clear reserved bit */ - UART_CTL_RSVD_MASK | - /* disable parity */ - UART_CTL_RXPAREN_MASK | - UART_CTL_TXPAREN_MASK | - /* disable loopback */ - UART_CTL_LOOPBACK_MASK, - /* set timeout to 5 */ - UART_CTL_RXTIMEOUT_5 | - /* set 8 bits/symbol */ - UART_CTL_BITSPERSYM_8 | - /* set 1 stop bit */ - UART_CTL_STOPBITS_1 | - /* set parity to even */ - UART_CTL_RXPAREVEN_MASK | - UART_CTL_TXPAREVEN_MASK); - - /* set uart fifo config */ - clrsetbits_le32(base + UART_FIFO_CFG_REG, - /* clear fifo config */ - UART_FIFO_CFG_RX_MASK | - UART_FIFO_CFG_TX_MASK, - /* set fifo config to 4 */ - UART_FIFO_CFG_RX_4 | - UART_FIFO_CFG_TX_4); - - /* set baud rate */ - val = ((clk / baudrate) >> 4); - if (val & 0x1) - val = (val >> 1); - else - val = (val >> 1) - 1; - writel(val, base + UART_BAUD_REG); - - /* clear interrupts */ - writel(0, base + UART_IR_REG); - - /* enable uart */ - bcm6858_serial_enable(base); - - return 0; -} - -static int bcm6858_serial_pending(struct udevice *dev, bool input) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val = readl(priv->base + UART_IR_REG); - - if (input) - return !!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY)); - else - return !(val & UART_IR_STAT(UART_IR_TXEMPTY)); -} - -static int bcm6858_serial_setbrg(struct udevice *dev, int baudrate) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - - return bcm6858_serial_init(priv->base, priv->uartclk, baudrate); -} - -static int bcm6858_serial_putc(struct udevice *dev, const char ch) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val; - - val = readl(priv->base + UART_IR_REG); - if (!(val & UART_IR_STAT(UART_IR_TXEMPTY))) - return -EAGAIN; - - writel(ch, priv->base + UART_FIFO_REG); - - return 0; -} - -static int bcm6858_serial_getc(struct udevice *dev) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - u32 val; - - val = readl(priv->base + UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_RXOVER)) - setbits_le32(priv->base + UART_CTL_REG, - UART_CTL_RSTRXFIFO_MASK); - - if (!(val & UART_IR_STAT(UART_IR_RXNOTEMPTY))) - return -EAGAIN; - - val = readl(priv->base + UART_FIFO_REG); - if (val & UART_FIFO_ANYERR_MASK) - return -EAGAIN; - - return val & UART_FIFO_VALID_MASK; -} - -static int bcm6858_serial_probe(struct udevice *dev) -{ - struct bcm6858_serial_priv *priv = dev_get_priv(dev); - struct clk clk; - int ret; - - /* get address */ - priv->base = dev_remap_addr(dev); - if (!priv->base) - return -EINVAL; - - /* get clock rate */ - ret = clk_get_by_index(dev, 0, &clk); - if (ret < 0) - return ret; - priv->uartclk = clk_get_rate(&clk); - clk_free(&clk); - - /* initialize serial */ - return bcm6858_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE); -} - -static const struct dm_serial_ops bcm6858_serial_ops = { - .putc = bcm6858_serial_putc, - .pending = bcm6858_serial_pending, - .getc = bcm6858_serial_getc, - .setbrg = bcm6858_serial_setbrg, -}; - -static const struct udevice_id bcm6858_serial_ids[] = { - { .compatible = "brcm,bcm6858-uart" }, - { /* sentinel */ } -}; - -U_BOOT_DRIVER(bcm6858_serial) = { - .name = "bcm6858-uart", - .id = UCLASS_SERIAL, - .of_match = bcm6858_serial_ids, - .probe = bcm6858_serial_probe, - .priv_auto_alloc_size = sizeof(struct bcm6858_serial_priv), - .ops = &bcm6858_serial_ops, - .flags = DM_FLAG_PRE_RELOC, -}; - -#ifdef CONFIG_DEBUG_UART_BCM6858 -static inline void _debug_uart_init(void) -{ - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; - - bcm6858_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); -} - -static inline void wait_xfered(void __iomem *base) -{ - do { - u32 val = readl(base + UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - } while (1); -} - -static inline void _debug_uart_putc(int ch) -{ - void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; - - wait_xfered(base); - writel(ch, base + UART_FIFO_REG); - wait_xfered(base); -} - -DEBUG_UART_FUNCS -#endif diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c index ee6ad9c9e59..a31d73766dd 100644 --- a/drivers/serial/serial_omap.c +++ b/drivers/serial/serial_omap.c @@ -7,7 +7,6 @@ */ #include <common.h> -#include <debug_uart.h> #include <dm.h> #include <dt-structs.h> #include <ns16550.h> @@ -20,6 +19,47 @@ #ifdef CONFIG_DEBUG_UART_OMAP +#ifndef CONFIG_SYS_NS16550_IER +#define CONFIG_SYS_NS16550_IER 0x00 +#endif + +#define UART_MCRVAL 0x00 +#define UART_LCRVAL UART_LCR_8N1 + +static inline void serial_out_shift(void *addr, int shift, int value) +{ +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED + outb(value, (ulong)addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) + out_le32(addr, value); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) + out_be32(addr, value); +#elif defined(CONFIG_SYS_NS16550_MEM32) + writel(value, addr); +#elif defined(CONFIG_SYS_BIG_ENDIAN) + writeb(value, addr + (1 << shift) - 1); +#else + writeb(value, addr); +#endif +} + +static inline int serial_in_shift(void *addr, int shift) +{ +#ifdef CONFIG_SYS_NS16550_PORT_MAPPED + return inb((ulong)addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_LITTLE_ENDIAN) + return in_le32(addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) + return in_be32(addr); +#elif defined(CONFIG_SYS_NS16550_MEM32) + return readl(addr); +#elif defined(CONFIG_SYS_BIG_ENDIAN) + return readb(addr + (1 << shift) - 1); +#else + return readb(addr); +#endif +} + #include <debug_uart.h> static inline void _debug_uart_init(void) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index d456beb43fc..98f83433bed 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -52,6 +52,20 @@ config SPL_DM_USB depends on DM_USB default y +config DM_USB_GADGET + bool "Enable driver model for USB Gadget" + depends on DM_USB + help + Enable driver model for USB Gadget (Peripheral + mode) + +config SPL_DM_USB_GADGET + bool "Enable driver model for USB Gadget in sPL" + depends on SPL_DM_USB + help + Enable driver model for USB Gadget in SPL + (Peripheral mode) + source "drivers/usb/host/Kconfig" source "drivers/usb/dwc3/Kconfig" diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 943b7630eba..bbd8105c06f 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -38,10 +38,11 @@ config USB_DWC3_OMAP Say 'Y' here if you have one such device config USB_DWC3_GENERIC - bool "Xilinx ZynqMP and similar Platforms" - depends on DM_USB && USB_DWC3 + bool "Generic implementation of a DWC3 wrapper (aka dwc3 glue)" + depends on DM_USB && USB_DWC3 && MISC help - Some platforms can reuse this DWC3 generic implementation. + Select this for Xilinx ZynqMP and similar Platforms. + This wrapper supports Host and Peripheral operation modes. config USB_DWC3_UNIPHIER bool "DesignWare USB3 Host Support on UniPhier Platforms" diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f1ca6191ce4..56e2a046bf0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -19,7 +19,7 @@ #include <asm/dma-mapping.h> #include <linux/ioport.h> #include <dm.h> - +#include <generic-phy.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -789,8 +789,92 @@ MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("DesignWare USB3 DRD Controller Driver"); -#if CONFIG_IS_ENABLED(DM_USB) +#if CONFIG_IS_ENABLED(PHY) && CONFIG_IS_ENABLED(DM_USB) +int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys) +{ + int i, ret, count; + struct phy *usb_phys; + + /* Return if no phy declared */ + if (!dev_read_prop(dev, "phys", NULL)) + return 0; + count = dev_count_phandle_with_args(dev, "phys", "#phy-cells"); + if (count <= 0) + return count; + + usb_phys = devm_kcalloc(dev, count, sizeof(struct phy), + GFP_KERNEL); + if (!usb_phys) + return -ENOMEM; + + for (i = 0; i < count; i++) { + ret = generic_phy_get_by_index(dev, i, &usb_phys[i]); + if (ret && ret != -ENOENT) { + pr_err("Failed to get USB PHY%d for %s\n", + i, dev->name); + return ret; + } + } + + for (i = 0; i < count; i++) { + ret = generic_phy_init(&usb_phys[i]); + if (ret) { + pr_err("Can't init USB PHY%d for %s\n", + i, dev->name); + goto phys_init_err; + } + } + + for (i = 0; i < count; i++) { + ret = generic_phy_power_on(&usb_phys[i]); + if (ret) { + pr_err("Can't power USB PHY%d for %s\n", + i, dev->name); + goto phys_poweron_err; + } + } + + *array = usb_phys; + *num_phys = count; + return 0; + +phys_poweron_err: + for (i = count - 1; i >= 0; i--) + generic_phy_power_off(&usb_phys[i]); + for (i = 0; i < count; i++) + generic_phy_exit(&usb_phys[i]); + + return ret; + +phys_init_err: + for (; i >= 0; i--) + generic_phy_exit(&usb_phys[i]); + + return ret; +} + +int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys) +{ + int i, ret; + + for (i = 0; i < num_phys; i++) { + if (!generic_phy_valid(&usb_phys[i])) + continue; + + ret = generic_phy_power_off(&usb_phys[i]); + ret |= generic_phy_exit(&usb_phys[i]); + if (ret) { + pr_err("Can't shutdown USB PHY%d for %s\n", + i, dev->name); + } + } + + return 0; +} +#endif + +#if CONFIG_IS_ENABLED(DM_USB_GADGET) int dwc3_init(struct dwc3 *dwc) { int ret; @@ -841,5 +925,4 @@ void dwc3_remove(struct dwc3 *dwc) dwc3_core_exit(dwc); kfree(dwc->mem); } - #endif diff --git a/drivers/usb/dwc3/dwc3-generic.c b/drivers/usb/dwc3/dwc3-generic.c index 56c9fd657fb..bc6bba198e9 100644 --- a/drivers/usb/dwc3/dwc3-generic.c +++ b/drivers/usb/dwc3/dwc3-generic.c @@ -8,72 +8,89 @@ */ #include <common.h> +#include <asm-generic/io.h> #include <dm.h> #include <dm/device-internal.h> #include <dm/lists.h> -#include <linux/usb/otg.h> -#include <linux/compat.h> +#include <dwc3-uboot.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> #include <malloc.h> #include <usb.h> #include "core.h" #include "gadget.h" -#include "linux-compat.h" +#include <reset.h> +#include <clk.h> -DECLARE_GLOBAL_DATA_PTR; +#if CONFIG_IS_ENABLED(DM_USB_GADGET) +struct dwc3_generic_peripheral { + struct dwc3 dwc3; + struct phy *phys; + int num_phys; + fdt_addr_t base; +}; -int usb_gadget_handle_interrupts(int index) +int dm_usb_gadget_handle_interrupts(struct udevice *dev) { - struct dwc3 *priv; - struct udevice *dev; - int ret; - - ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev); - if (!dev || ret) { - pr_err("No USB device found\n"); - return -ENODEV; - } - - priv = dev_get_priv(dev); + struct dwc3_generic_peripheral *priv = dev_get_priv(dev); + struct dwc3 *dwc3 = &priv->dwc3; - dwc3_gadget_uboot_handle_interrupt(priv); + dwc3_gadget_uboot_handle_interrupt(dwc3); return 0; } static int dwc3_generic_peripheral_probe(struct udevice *dev) { - struct dwc3 *priv = dev_get_priv(dev); + int rc; + struct dwc3_generic_peripheral *priv = dev_get_priv(dev); + struct dwc3 *dwc3 = &priv->dwc3; - return dwc3_init(priv); + rc = dwc3_setup_phy(dev, &priv->phys, &priv->num_phys); + if (rc) + return rc; + + dwc3->regs = map_physmem(priv->base, DWC3_OTG_REGS_END, MAP_NOCACHE); + dwc3->regs += DWC3_GLOBALS_REGS_START; + dwc3->dev = dev; + + rc = dwc3_init(dwc3); + if (rc) { + unmap_physmem(dwc3->regs, MAP_NOCACHE); + return rc; + } + + return 0; } static int dwc3_generic_peripheral_remove(struct udevice *dev) { - struct dwc3 *priv = dev_get_priv(dev); + struct dwc3_generic_peripheral *priv = dev_get_priv(dev); + struct dwc3 *dwc3 = &priv->dwc3; - dwc3_remove(priv); + dwc3_remove(dwc3); + dwc3_shutdown_phy(dev, priv->phys, priv->num_phys); + unmap_physmem(dwc3->regs, MAP_NOCACHE); return 0; } static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev) { - struct dwc3 *priv = dev_get_priv(dev); + struct dwc3_generic_peripheral *priv = dev_get_priv(dev); + struct dwc3 *dwc3 = &priv->dwc3; int node = dev_of_offset(dev); - priv->regs = (void *)devfdt_get_addr(dev); - priv->regs += DWC3_GLOBALS_REGS_START; + priv->base = devfdt_get_addr(dev); - priv->maximum_speed = usb_get_maximum_speed(node); - if (priv->maximum_speed == USB_SPEED_UNKNOWN) { + dwc3->maximum_speed = usb_get_maximum_speed(node); + if (dwc3->maximum_speed == USB_SPEED_UNKNOWN) { pr_err("Invalid usb maximum speed\n"); return -ENODEV; } - priv->dr_mode = usb_get_dr_mode(node); - if (priv->dr_mode == USB_DR_MODE_UNKNOWN) { + dwc3->dr_mode = usb_get_dr_mode(node); + if (dwc3->dr_mode == USB_DR_MODE_UNKNOWN) { pr_err("Invalid usb mode setup\n"); return -ENODEV; } @@ -81,24 +98,112 @@ static int dwc3_generic_peripheral_ofdata_to_platdata(struct udevice *dev) return 0; } -static int dwc3_generic_peripheral_bind(struct udevice *dev) -{ - return device_probe(dev); -} - U_BOOT_DRIVER(dwc3_generic_peripheral) = { .name = "dwc3-generic-peripheral", - .id = UCLASS_USB_DEV_GENERIC, + .id = UCLASS_USB_GADGET_GENERIC, .ofdata_to_platdata = dwc3_generic_peripheral_ofdata_to_platdata, .probe = dwc3_generic_peripheral_probe, .remove = dwc3_generic_peripheral_remove, - .bind = dwc3_generic_peripheral_bind, - .platdata_auto_alloc_size = sizeof(struct usb_platdata), - .priv_auto_alloc_size = sizeof(struct dwc3), - .flags = DM_FLAG_ALLOC_PRIV_DMA, + .priv_auto_alloc_size = sizeof(struct dwc3_generic_peripheral), +}; +#endif + +struct dwc3_glue_data { + struct clk_bulk clks; + struct reset_ctl_bulk resets; + fdt_addr_t regs; }; -static int dwc3_generic_bind(struct udevice *parent) +struct dwc3_glue_ops { + void (*select_dr_mode)(struct udevice *dev, int index, + enum usb_dr_mode mode); +}; + +void dwc3_ti_select_dr_mode(struct udevice *dev, int index, + enum usb_dr_mode mode) +{ +#define USBOTGSS_UTMI_OTG_STATUS 0x0084 +#define USBOTGSS_UTMI_OTG_OFFSET 0x0480 + +/* UTMI_OTG_STATUS REGISTER */ +#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE BIT(31) +#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT BIT(9) +#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE BIT(8) +#define USBOTGSS_UTMI_OTG_STATUS_IDDIG BIT(4) +#define USBOTGSS_UTMI_OTG_STATUS_SESSEND BIT(3) +#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID BIT(2) +#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID BIT(1) +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + + u32 use_id_pin; + u32 host_mode; + u32 reg; + u32 utmi_mode; + u32 utmi_status_offset = USBOTGSS_UTMI_OTG_STATUS; + + struct dwc3_glue_data *glue = dev_get_platdata(dev); + void *base = map_physmem(glue->regs, 0x10000, MAP_NOCACHE); + + if (device_is_compatible(dev, "ti,am437x-dwc3")) + utmi_status_offset += USBOTGSS_UTMI_OTG_OFFSET; + + utmi_mode = dev_read_u32_default(dev, "utmi-mode", + DWC3_OMAP_UTMI_MODE_UNKNOWN); + if (utmi_mode != DWC3_OMAP_UTMI_MODE_HW) { + debug("%s: OTG is not supported. defaulting to PERIPHERAL\n", + dev->name); + mode = USB_DR_MODE_PERIPHERAL; + } + + switch (mode) { + case USB_DR_MODE_PERIPHERAL: + use_id_pin = 0; + host_mode = 0; + break; + case USB_DR_MODE_HOST: + use_id_pin = 0; + host_mode = 1; + break; + case USB_DR_MODE_OTG: + default: + use_id_pin = 1; + host_mode = 0; + break; + } + + reg = readl(base + utmi_status_offset); + + reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SW_MODE); + if (!use_id_pin) + reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE; + + writel(reg, base + utmi_status_offset); + + reg &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSEND | + USBOTGSS_UTMI_OTG_STATUS_VBUSVALID | + USBOTGSS_UTMI_OTG_STATUS_IDDIG); + + reg |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID | + USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT; + + if (!host_mode) + reg |= USBOTGSS_UTMI_OTG_STATUS_IDDIG | + USBOTGSS_UTMI_OTG_STATUS_VBUSVALID; + + writel(reg, base + utmi_status_offset); + + unmap_physmem(base, MAP_NOCACHE); +} + +struct dwc3_glue_ops ti_ops = { + .select_dr_mode = dwc3_ti_select_dr_mode, +}; + +static int dwc3_glue_bind(struct udevice *parent) { const void *fdt = gd->fdt_blob; int node; @@ -109,29 +214,32 @@ static int dwc3_generic_bind(struct udevice *parent) const char *name = fdt_get_name(fdt, node, NULL); enum usb_dr_mode dr_mode; struct udevice *dev; - const char *driver; + const char *driver = NULL; debug("%s: subnode name: %s\n", __func__, name); - if (strncmp(name, "dwc3@", 4)) - continue; dr_mode = usb_get_dr_mode(node); switch (dr_mode) { case USB_DR_MODE_PERIPHERAL: case USB_DR_MODE_OTG: +#if CONFIG_IS_ENABLED(DM_USB_GADGET) debug("%s: dr_mode: OTG or Peripheral\n", __func__); driver = "dwc3-generic-peripheral"; +#endif break; case USB_DR_MODE_HOST: debug("%s: dr_mode: HOST\n", __func__); - driver = "dwc3-generic-host"; + driver = "xhci-dwc3"; break; default: debug("%s: unsupported dr_mode\n", __func__); return -ENODEV; }; + if (!driver) + continue; + ret = device_bind_driver_to_node(parent, driver, name, offset_to_ofnode(node), &dev); if (ret) { @@ -144,14 +252,107 @@ static int dwc3_generic_bind(struct udevice *parent) return 0; } -static const struct udevice_id dwc3_generic_ids[] = { +static int dwc3_glue_reset_init(struct udevice *dev, + struct dwc3_glue_data *glue) +{ + int ret; + + ret = reset_get_bulk(dev, &glue->resets); + if (ret == -ENOTSUPP) + return 0; + else if (ret) + return ret; + + ret = reset_deassert_bulk(&glue->resets); + if (ret) { + reset_release_bulk(&glue->resets); + return ret; + } + + return 0; +} + +static int dwc3_glue_clk_init(struct udevice *dev, + struct dwc3_glue_data *glue) +{ + int ret; + + ret = clk_get_bulk(dev, &glue->clks); + if (ret == -ENOSYS) + return 0; + if (ret) + return ret; + +#if CONFIG_IS_ENABLED(CLK) + ret = clk_enable_bulk(&glue->clks); + if (ret) { + clk_release_bulk(&glue->clks); + return ret; + } +#endif + + return 0; +} + +static int dwc3_glue_probe(struct udevice *dev) +{ + struct dwc3_glue_ops *ops = (struct dwc3_glue_ops *)dev_get_driver_data(dev); + struct dwc3_glue_data *glue = dev_get_platdata(dev); + struct udevice *child = NULL; + int index = 0; + int ret; + + glue->regs = dev_read_addr(dev); + + ret = dwc3_glue_clk_init(dev, glue); + if (ret) + return ret; + + ret = dwc3_glue_reset_init(dev, glue); + if (ret) + return ret; + + ret = device_find_first_child(dev, &child); + if (ret) + return ret; + + while (child) { + enum usb_dr_mode dr_mode; + + dr_mode = usb_get_dr_mode(dev_of_offset(child)); + device_find_next_child(&child); + if (ops && ops->select_dr_mode) + ops->select_dr_mode(dev, index, dr_mode); + index++; + } + + return 0; +} + +static int dwc3_glue_remove(struct udevice *dev) +{ + struct dwc3_glue_data *glue = dev_get_platdata(dev); + + reset_release_bulk(&glue->resets); + + clk_release_bulk(&glue->clks); + + return dm_scan_fdt_dev(dev); +} + +static const struct udevice_id dwc3_glue_ids[] = { { .compatible = "xlnx,zynqmp-dwc3" }, + { .compatible = "ti,dwc3", .data = (ulong)&ti_ops }, { } }; U_BOOT_DRIVER(dwc3_generic_wrapper) = { .name = "dwc3-generic-wrapper", .id = UCLASS_MISC, - .of_match = dwc3_generic_ids, - .bind = dwc3_generic_bind, + .of_match = dwc3_glue_ids, + .bind = dwc3_glue_bind, + .probe = dwc3_glue_probe, + .remove = dwc3_glue_remove, + .platdata_auto_alloc_size = sizeof(struct dwc3_glue_data), + }; diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 4f68887b8d5..818efb3e8d7 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -12,7 +12,7 @@ * * commit c00552ebaf : Merge 3.18-rc7 into usb-next */ - +#include <common.h> #include <linux/kernel.h> #include <linux/list.h> diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 193583b437c..3b3d9af6810 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -100,9 +100,6 @@ struct eth_dev { struct usb_gadget *gadget; struct usb_request *req; /* for control responses */ struct usb_request *stat_req; /* for cdc & rndis status */ -#if CONFIG_IS_ENABLED(DM_USB) - struct udevice *usb_udev; -#endif u8 config; struct usb_ep *in_ep, *out_ep, *status_ep; @@ -2336,40 +2333,17 @@ fail: } /*-------------------------------------------------------------------------*/ - -#if CONFIG_IS_ENABLED(DM_USB) -int dm_usb_init(struct eth_dev *e_dev) -{ - struct udevice *dev = NULL; - int ret; - - ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &dev); - if (!dev || ret) { - pr_err("No USB device found\n"); - return -ENODEV; - } - - e_dev->usb_udev = dev; - - return ret; -} -#endif - static int _usb_eth_init(struct ether_priv *priv) { struct eth_dev *dev = &priv->ethdev; struct usb_gadget *gadget; unsigned long ts; + int ret; unsigned long timeout = USB_CONNECT_TIMEOUT; -#if CONFIG_IS_ENABLED(DM_USB) - if (dm_usb_init(dev)) { - pr_err("USB ether not found\n"); - return -ENODEV; - } -#else - board_usb_init(0, USB_INIT_DEVICE); -#endif + ret = usb_gadget_initialize(0); + if (ret) + return ret; /* Configure default mac-addresses for the USB ethernet device */ #ifdef CONFIG_USBNET_DEV_ADDR @@ -2541,9 +2515,7 @@ void _usb_eth_halt(struct ether_priv *priv) } usb_gadget_unregister_driver(&priv->eth_driver); -#if !CONFIG_IS_ENABLED(DM_USB) - board_usb_cleanup(0, USB_INIT_DEVICE); -#endif + usb_gadget_release(0); } #ifndef CONFIG_DM_ETH @@ -2699,7 +2671,7 @@ int usb_ether_init(void) struct udevice *usb_dev; int ret; - ret = uclass_first_device(UCLASS_USB_DEV_GENERIC, &usb_dev); + ret = uclass_first_device(UCLASS_USB_GADGET_GENERIC, &usb_dev); if (!usb_dev || ret) { pr_err("No USB device found\n"); return ret; diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index 449339f2c44..38ac2dd475e 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -2,4 +2,8 @@ # # USB peripheral controller drivers +ifndef CONFIG_$(SPL_)DM_USB_GADGET obj-$(CONFIG_USB_DWC3_GADGET) += udc-core.o +endif + +obj-$(CONFIG_$(SPL_)DM_USB_GADGET) += udc-uclass.o udc-core.o diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index f5c30dd7507..62b47781ddc 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -18,7 +18,8 @@ #include <asm/cache.h> #include <asm/dma-mapping.h> #include <common.h> - +#include <dm.h> +#include <dm/device-internal.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/udc/udc-uclass.c b/drivers/usb/gadget/udc/udc-uclass.c new file mode 100644 index 00000000000..062051857a9 --- /dev/null +++ b/drivers/usb/gadget/udc/udc-uclass.c @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com + * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> + */ + +#include <common.h> +#include <dm.h> +#include <dm/device-internal.h> +#include <linux/usb/gadget.h> + +#define MAX_UDC_DEVICES 4 +static struct udevice *dev_array[MAX_UDC_DEVICES]; +int usb_gadget_initialize(int index) +{ + int ret; + struct udevice *dev = NULL; + + if (index < 0 || index >= ARRAY_SIZE(dev_array)) + return -EINVAL; + if (dev_array[index]) + return 0; + ret = uclass_get_device(UCLASS_USB_GADGET_GENERIC, index, &dev); + if (!dev || ret) { + pr_err("No USB device found\n"); + return -ENODEV; + } + dev_array[index] = dev; + return 0; +} + +int usb_gadget_release(int index) +{ +#if CONFIG_IS_ENABLED(DM_DEVICE_REMOVE) + int ret; + if (index < 0 || index >= ARRAY_SIZE(dev_array)) + return -EINVAL; + + ret = device_remove(dev_array[index], DM_REMOVE_NORMAL); + if (!ret) + dev_array[index] = NULL; + return ret; +#else + return -ENOTSUPP; +#endif +} + +int usb_gadget_handle_interrupts(int index) +{ + if (index < 0 || index >= ARRAY_SIZE(dev_array)) + return -EINVAL; + return dm_usb_gadget_handle_interrupts(dev_array[index]); +} + +UCLASS_DRIVER(usb_gadget_generic) = { + .id = UCLASS_USB_GADGET_GENERIC, + .name = "usb_gadget_generic", +}; diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c index dd0d156027e..83b9f119e71 100644 --- a/drivers/usb/host/xhci-dwc3.c +++ b/drivers/usb/host/xhci-dwc3.c @@ -12,6 +12,7 @@ #include <fdtdec.h> #include <generic-phy.h> #include <usb.h> +#include <dwc3-uboot.h> #include "xhci.h" #include <asm/io.h> @@ -110,105 +111,21 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val) } #if CONFIG_IS_ENABLED(DM_USB) -static int xhci_dwc3_setup_phy(struct udevice *dev) -{ - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); - int i, ret, count; - - /* Return if no phy declared */ - if (!dev_read_prop(dev, "phys", NULL)) - return 0; - - count = dev_count_phandle_with_args(dev, "phys", "#phy-cells"); - if (count <= 0) - return count; - - plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy), - GFP_KERNEL); - if (!plat->usb_phys) - return -ENOMEM; - - for (i = 0; i < count; i++) { - ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]); - if (ret && ret != -ENOENT) { - pr_err("Failed to get USB PHY%d for %s\n", - i, dev->name); - return ret; - } - - ++plat->num_phys; - } - - for (i = 0; i < plat->num_phys; i++) { - ret = generic_phy_init(&plat->usb_phys[i]); - if (ret) { - pr_err("Can't init USB PHY%d for %s\n", - i, dev->name); - goto phys_init_err; - } - } - - for (i = 0; i < plat->num_phys; i++) { - ret = generic_phy_power_on(&plat->usb_phys[i]); - if (ret) { - pr_err("Can't power USB PHY%d for %s\n", - i, dev->name); - goto phys_poweron_err; - } - } - - return 0; - -phys_poweron_err: - for (; i >= 0; i--) - generic_phy_power_off(&plat->usb_phys[i]); - - for (i = 0; i < plat->num_phys; i++) - generic_phy_exit(&plat->usb_phys[i]); - - return ret; - -phys_init_err: - for (; i >= 0; i--) - generic_phy_exit(&plat->usb_phys[i]); - - return ret; -} - -static int xhci_dwc3_shutdown_phy(struct udevice *dev) -{ - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); - int i, ret; - - for (i = 0; i < plat->num_phys; i++) { - if (!generic_phy_valid(&plat->usb_phys[i])) - continue; - - ret = generic_phy_power_off(&plat->usb_phys[i]); - ret |= generic_phy_exit(&plat->usb_phys[i]); - if (ret) { - pr_err("Can't shutdown USB PHY%d for %s\n", - i, dev->name); - } - } - - return 0; -} - static int xhci_dwc3_probe(struct udevice *dev) { struct xhci_hcor *hcor; struct xhci_hccr *hccr; struct dwc3 *dwc3_reg; enum usb_dr_mode dr_mode; + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); int ret; hccr = (struct xhci_hccr *)((uintptr_t)dev_read_addr(dev)); hcor = (struct xhci_hcor *)((uintptr_t)hccr + HC_LENGTH(xhci_readl(&(hccr)->cr_capbase))); - ret = xhci_dwc3_setup_phy(dev); - if (ret) + ret = dwc3_setup_phy(dev, &plat->usb_phys, &plat->num_phys); + if (ret && (ret != -ENOTSUPP)) return ret; dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET); @@ -227,7 +144,9 @@ static int xhci_dwc3_probe(struct udevice *dev) static int xhci_dwc3_remove(struct udevice *dev) { - xhci_dwc3_shutdown_phy(dev); + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); + + dwc3_shutdown_phy(dev, plat->usb_phys, plat->num_phys); return xhci_deregister(dev); } diff --git a/drivers/usb/musb-new/omap2430.c b/drivers/usb/musb-new/omap2430.c index 58aed72b7d3..32743aa72c5 100644 --- a/drivers/usb/musb-new/omap2430.c +++ b/drivers/usb/musb-new/omap2430.c @@ -263,7 +263,7 @@ U_BOOT_DRIVER(omap2430_musb) = { #ifdef CONFIG_USB_MUSB_HOST .id = UCLASS_USB, #else - .id = UCLASS_USB_DEV_GENERIC, + .id = UCLASS_USB_GADGET_GENERIC, #endif .of_match = omap2430_musb_ids, .ofdata_to_platdata = omap2430_musb_ofdata_to_platdata, diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index 6cf9826cda1..d7170a3078c 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -535,7 +535,7 @@ U_BOOT_DRIVER(usb_musb) = { #ifdef CONFIG_USB_MUSB_HOST .id = UCLASS_USB, #else - .id = UCLASS_USB_DEV_GENERIC, + .id = UCLASS_USB_GADGET_GENERIC, #endif .of_match = sunxi_musb_ids, .probe = musb_usb_probe, diff --git a/drivers/w1/w1-uclass.c b/drivers/w1/w1-uclass.c index cb41b68eff1..042b3b5ce0a 100644 --- a/drivers/w1/w1-uclass.c +++ b/drivers/w1/w1-uclass.c @@ -84,10 +84,6 @@ static int w1_enumerate(struct udevice *bus) rn |= (tmp64 << i); } - /* last device or error, aborting here */ - if ((triplet_ret & 0x03) == 0x03) - last_device = true; - if ((triplet_ret & 0x03) != 0x03) { if (desc_bit == last_zero || last_zero < 0) { last_device = 1; diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 4bc3030ab88..ac8913e7192 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -571,6 +571,17 @@ static int get_fs_info(fsdata *mydata) mydata->sect_size, cur_part_info.blksz); return -1; } + if (mydata->clust_size == 0) { + printf("Error: FAT cluster size not set\n"); + return -1; + } + if ((unsigned int)mydata->clust_size * mydata->sect_size > + MAX_CLUSTSIZE) { + printf("Error: FAT cluster size too big (cs=%u, max=%u)\n", + (unsigned int)mydata->clust_size * mydata->sect_size, + MAX_CLUSTSIZE); + return -1; + } if (mydata->fatsize == 32) { mydata->data_begin = mydata->rootdir_sect - @@ -810,6 +821,9 @@ static dir_entry *extract_vfat_name(fat_itr *itr) slot2str((dir_slot *)dent, buf, &idx); + if (n + idx >= sizeof(itr->l_name)) + return NULL; + /* shift accumulated long-name up and copy new part in: */ memmove(itr->l_name + idx, itr->l_name, n); memcpy(itr->l_name, buf, idx); diff --git a/include/axp209.h b/include/axp209.h index b7de6ed73ca..f4f1b2fe56d 100644 --- a/include/axp209.h +++ b/include/axp209.h @@ -3,11 +3,14 @@ * (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net> */ +#include <linux/bitops.h> + enum axp209_reg { AXP209_POWER_STATUS = 0x00, AXP209_CHIP_VERSION = 0x03, AXP209_OUTPUT_CTRL = 0x12, AXP209_DCDC2_VOLTAGE = 0x23, + AXP209_VRC_DCDC2_LDO3 = 0x25, AXP209_DCDC3_VOLTAGE = 0x27, AXP209_LDO24_VOLTAGE = 0x28, AXP209_LDO3_VOLTAGE = 0x29, @@ -20,29 +23,64 @@ enum axp209_reg { AXP209_SHUTDOWN = 0x32, }; -#define AXP209_POWER_STATUS_ON_BY_DC (1 << 0) -#define AXP209_POWER_STATUS_VBUS_USABLE (1 << 4) +#define AXP209_POWER_STATUS_ON_BY_DC BIT(0) +#define AXP209_POWER_STATUS_VBUS_USABLE BIT(4) + +#define AXP209_CHIP_VERSION_MASK 0x0f + +#define AXP209_OUTPUT_CTRL_EXTEN BIT(0) +#define AXP209_OUTPUT_CTRL_DCDC3 BIT(1) +#define AXP209_OUTPUT_CTRL_LDO2 BIT(2) +#define AXP209_OUTPUT_CTRL_LDO4 BIT(3) +#define AXP209_OUTPUT_CTRL_DCDC2 BIT(4) +#define AXP209_OUTPUT_CTRL_LDO3 BIT(6) + +/* + * AXP209 datasheet contains wrong information about LDO3 VRC: + * - VRC is actually enabled when BIT(1) is True + * - VRC is actually not enabled by default (BIT(3) = 0 after reset) + */ +#define AXP209_VRC_LDO3_EN BIT(3) +#define AXP209_VRC_DCDC2_EN BIT(2) +#define AXP209_VRC_LDO3_800uV_uS (BIT(1) | AXP209_VRC_LDO3_EN) +#define AXP209_VRC_LDO3_1600uV_uS AXP209_VRC_LDO3_EN +#define AXP209_VRC_DCDC2_800uV_uS (BIT(0) | AXP209_VRC_DCDC2_EN) +#define AXP209_VRC_DCDC2_1600uV_uS AXP209_VRC_DCDC2_EN +#define AXP209_VRC_LDO3_MASK 0xa +#define AXP209_VRC_DCDC2_MASK 0x5 +#define AXP209_VRC_DCDC2_SLOPE_SET(reg, cfg) \ + (((reg) & ~AXP209_VRC_DCDC2_MASK) | \ + ((cfg) & AXP209_VRC_DCDC2_MASK)) +#define AXP209_VRC_LDO3_SLOPE_SET(reg, cfg) \ + (((reg) & ~AXP209_VRC_LDO3_MASK) | \ + ((cfg) & AXP209_VRC_LDO3_MASK)) + +#define AXP209_LDO24_LDO2_MASK 0xf0 +#define AXP209_LDO24_LDO4_MASK 0x0f +#define AXP209_LDO24_LDO2_SET(reg, cfg) \ + (((reg) & ~AXP209_LDO24_LDO2_MASK) | \ + (((cfg) << 4) & AXP209_LDO24_LDO2_MASK)) +#define AXP209_LDO24_LDO4_SET(reg, cfg) \ + (((reg) & ~AXP209_LDO24_LDO4_MASK) | \ + (((cfg) << 0) & AXP209_LDO24_LDO4_MASK)) -#define AXP209_OUTPUT_CTRL_EXTEN (1 << 0) -#define AXP209_OUTPUT_CTRL_DCDC3 (1 << 1) -#define AXP209_OUTPUT_CTRL_LDO2 (1 << 2) -#define AXP209_OUTPUT_CTRL_LDO4 (1 << 3) -#define AXP209_OUTPUT_CTRL_DCDC2 (1 << 4) -#define AXP209_OUTPUT_CTRL_LDO3 (1 << 6) +#define AXP209_LDO3_VOLTAGE_FROM_LDO3IN BIT(7) +#define AXP209_LDO3_VOLTAGE_MASK 0x7f +#define AXP209_LDO3_VOLTAGE_SET(x) ((x) & AXP209_LDO3_VOLTAGE_MASK) -#define AXP209_IRQ5_PEK_UP (1 << 6) -#define AXP209_IRQ5_PEK_DOWN (1 << 5) +#define AXP209_IRQ5_PEK_UP BIT(6) +#define AXP209_IRQ5_PEK_DOWN BIT(5) -#define AXP209_POWEROFF (1 << 7) +#define AXP209_POWEROFF BIT(7) /* For axp_gpio.c */ #define AXP_POWER_STATUS 0x00 -#define AXP_POWER_STATUS_VBUS_PRESENT (1 << 5) +#define AXP_POWER_STATUS_VBUS_PRESENT BIT(5) #define AXP_GPIO0_CTRL 0x90 #define AXP_GPIO1_CTRL 0x92 #define AXP_GPIO2_CTRL 0x93 -#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ -#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ -#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ +#define AXP_GPIO_CTRL_OUTPUT_LOW 0x00 /* Drive pin low */ +#define AXP_GPIO_CTRL_OUTPUT_HIGH 0x01 /* Drive pin high */ +#define AXP_GPIO_CTRL_INPUT 0x02 /* Input */ #define AXP_GPIO_STATE 0x94 -#define AXP_GPIO_STATE_OFFSET 4 +#define AXP_GPIO_STATE_OFFSET 4 diff --git a/include/configs/helios4.h b/include/configs/helios4.h index ce912ea3241..3157225f067 100644 --- a/include/configs/helios4.h +++ b/include/configs/helios4.h @@ -6,6 +6,8 @@ #ifndef _CONFIG_HELIOS4_H #define _CONFIG_HELIOS4_H +#include <linux/sizes.h> + /* * High Level Configuration Options (easy to change) */ @@ -23,6 +25,9 @@ /* SPI NOR flash default params, used by sf commands */ #define CONFIG_SF_DEFAULT_BUS 1 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 104000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 /* * SDIO/MMC Card Configuration @@ -43,28 +48,33 @@ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI +/* + * SPI Flash configuration for the environment access + */ +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED + +/* Environment in SPI NOR flash */ +#define CONFIG_ENV_SECT_SIZE SZ_64K +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET SZ_1M +#endif + +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC /* Environment in MMC */ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SECT_SIZE 0x200 -#define CONFIG_ENV_SIZE 0x10000 -/* - * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC - * boot image starts @ LBA-0. - * As result in MMC/eMMC case it will be a 1 sector gap between u-boot - * image and environment - */ -#define CONFIG_ENV_OFFSET 0xf0000 +#define CONFIG_ENV_SIZE 0x2000 +/* stay within first 1M */ +#define CONFIG_ENV_OFFSET (SZ_1M - CONFIG_ENV_SIZE) #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET +#endif #define CONFIG_PHY_MARVELL /* there is a marvell phy */ #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ -/* PCIe support */ -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PCI_MVEBU -#define CONFIG_PCI_SCAN_SHOW -#endif - /* Keep device tree and initrd in lower memory so the kernel can access them */ #define RELOCATION_LIMITS_ENV_SETTINGS \ "fdt_high=0x10000000\0" \ @@ -80,7 +90,13 @@ */ #define SPL_BOOT_SPI_NOR_FLASH 1 #define SPL_BOOT_SDIO_MMC_CARD 2 + +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI +#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SPI_NOR_FLASH +#endif +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD +#endif /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) @@ -99,12 +115,16 @@ #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH /* SPL related SPI defines */ +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS #endif #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD /* SPL related MMC defines */ +#define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS #ifdef CONFIG_SPL_BUILD diff --git a/include/crc.h b/include/crc.h deleted file mode 100644 index 2a00af5be46..00000000000 --- a/include/crc.h +++ /dev/null @@ -1,43 +0,0 @@ -/* SPDX-License-Identifier: eCos-2.0 */ -/* - *========================================================================== - * - * crc.h - * - * Interface for the CRC algorithms. - * - *========================================================================== - *========================================================================== - *#####DESCRIPTIONBEGIN#### - * - * Author(s): Andrew Lunn - * Contributors: Andrew Lunn - * Date: 2002-08-06 - * Purpose: - * Description: - * - * This code is part of eCos (tm). - * - *####DESCRIPTIONEND#### - * - *========================================================================== - */ - -#ifndef _SERVICES_CRC_CRC_H_ -#define _SERVICES_CRC_CRC_H_ - -#include <linux/types.h> - -#ifndef __externC -# ifdef __cplusplus -# define __externC extern "C" -# else -# define __externC extern -# endif -#endif - -/* 16 bit CRC with polynomial x^16+x^12+x^5+1 (CRC-CCITT) */ - -uint16_t crc16_ccitt(uint16_t crc_start, unsigned char *s, int len); - -#endif /* _SERVICES_CRC_CRC_H_ */ diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 62d9e2f404a..5d4e207fd1d 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -42,6 +42,7 @@ enum uclass_id { UCLASS_FIRMWARE, /* Firmware */ UCLASS_FS_FIRMWARE_LOADER, /* Generic loader */ UCLASS_GPIO, /* Bank of general-purpose I/O pins */ + UCLASS_HWSPINLOCK, /* Hardware semaphores */ UCLASS_I2C, /* I2C bus */ UCLASS_I2C_EEPROM, /* I2C EEPROM device */ UCLASS_I2C_GENERIC, /* Generic I2C device */ @@ -93,6 +94,7 @@ enum uclass_id { UCLASS_USB, /* USB bus */ UCLASS_USB_DEV_GENERIC, /* USB generic device */ UCLASS_USB_HUB, /* USB hub */ + UCLASS_USB_GADGET_GENERIC, /* USB generic device */ UCLASS_VIDEO, /* Video or LCD device */ UCLASS_VIDEO_BRIDGE, /* Video bridge, e.g. DisplayPort to LVDS */ UCLASS_VIDEO_CONSOLE, /* Text console driver for video device */ diff --git a/include/dma-uclass.h b/include/dma-uclass.h new file mode 100644 index 00000000000..31b43fb4b98 --- /dev/null +++ b/include/dma-uclass.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2015 - 2018 Texas Instruments Incorporated <www.ti.com> + * Written by Mugunthan V N <mugunthanvnm@ti.com> + * + */ + +#ifndef _DMA_UCLASS_H +#define _DMA_UCLASS_H + +/* See dma.h for background documentation. */ + +#include <dma.h> + +struct ofnode_phandle_args; + +/* + * struct dma_ops - Driver model DMA operations + * + * The uclass interface is implemented by all DMA devices which use + * driver model. + */ +struct dma_ops { +#ifdef CONFIG_DMA_CHANNELS + /** + * of_xlate - Translate a client's device-tree (OF) DMA specifier. + * + * The DMA core calls this function as the first step in implementing + * a client's dma_get_by_*() call. + * + * If this function pointer is set to NULL, the DMA core will use a + * default implementation, which assumes #dma-cells = <1>, and that + * the DT cell contains a simple integer DMA Channel. + * + * At present, the DMA API solely supports device-tree. If this + * changes, other xxx_xlate() functions may be added to support those + * other mechanisms. + * + * @dma: The dma struct to hold the translation result. + * @args: The dma specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct dma *dma, + struct ofnode_phandle_args *args); + /** + * request - Request a translated DMA. + * + * The DMA core calls this function as the second step in + * implementing a client's dma_get_by_*() call, following a successful + * xxx_xlate() call, or as the only step in implementing a client's + * dma_request() call. + * + * @dma: The DMA struct to request; this has been filled in by + * a previoux xxx_xlate() function call, or by the caller of + * dma_request(). + * @return 0 if OK, or a negative error code. + */ + int (*request)(struct dma *dma); + /** + * free - Free a previously requested dma. + * + * This is the implementation of the client dma_free() API. + * + * @dma: The DMA to free. + * @return 0 if OK, or a negative error code. + */ + int (*free)(struct dma *dma); + /** + * enable() - Enable a DMA Channel. + * + * @dma: The DMA Channel to manipulate. + * @return zero on success, or -ve error code. + */ + int (*enable)(struct dma *dma); + /** + * disable() - Disable a DMA Channel. + * + * @dma: The DMA Channel to manipulate. + * @return zero on success, or -ve error code. + */ + int (*disable)(struct dma *dma); + /** + * prepare_rcv_buf() - Prepare/Add receive DMA buffer. + * + * @dma: The DMA Channel to manipulate. + * @dst: The receive buffer pointer. + * @size: The receive buffer size + * @return zero on success, or -ve error code. + */ + int (*prepare_rcv_buf)(struct dma *dma, void *dst, size_t size); + /** + * receive() - Receive a DMA transfer. + * + * @dma: The DMA Channel to manipulate. + * @dst: The destination pointer. + * @metadata: DMA driver's specific data + * @return zero on success, or -ve error code. + */ + int (*receive)(struct dma *dma, void **dst, void *metadata); + /** + * send() - Send a DMA transfer. + * + * @dma: The DMA Channel to manipulate. + * @src: The source pointer. + * @len: Length of the data to be sent (number of bytes). + * @metadata: DMA driver's specific data + * @return zero on success, or -ve error code. + */ + int (*send)(struct dma *dma, void *src, size_t len, void *metadata); +#endif /* CONFIG_DMA_CHANNELS */ + /** + * transfer() - Issue a DMA transfer. The implementation must + * wait until the transfer is done. + * + * @dev: The DMA device + * @direction: direction of data transfer (should be one from + * enum dma_direction) + * @dst: The destination pointer. + * @src: The source pointer. + * @len: Length of the data to be copied (number of bytes). + * @return zero on success, or -ve error code. + */ + int (*transfer)(struct udevice *dev, int direction, void *dst, + void *src, size_t len); +}; + +#endif /* _DMA_UCLASS_H */ diff --git a/include/dma.h b/include/dma.h index 50e965241c0..d1c3d0df7d9 100644 --- a/include/dma.h +++ b/include/dma.h @@ -1,12 +1,17 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * (C) Copyright 2015 - * Texas Instruments Incorporated, <www.ti.com> + * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com> + * Copyright (C) 2015 - 2018 Texas Instruments Incorporated <www.ti.com> + * Written by Mugunthan V N <mugunthanvnm@ti.com> + * */ #ifndef _DMA_H_ #define _DMA_H_ +#include <linux/errno.h> +#include <linux/types.h> + /* * enum dma_direction - dma transfer direction indicator * @DMA_MEM_TO_MEM: Memcpy mode @@ -27,28 +32,6 @@ enum dma_direction { #define DMA_SUPPORTS_DEV_TO_DEV BIT(3) /* - * struct dma_ops - Driver model DMA operations - * - * The uclass interface is implemented by all DMA devices which use - * driver model. - */ -struct dma_ops { - /* - * Get the current timer count - * - * @dev: The DMA device - * @direction: direction of data transfer should be one from - enum dma_direction - * @dst: Destination pointer - * @src: Source pointer - * @len: Length of the data to be copied. - * @return: 0 if OK, -ve on error - */ - int (*transfer)(struct udevice *dev, int direction, void *dst, - void *src, size_t len); -}; - -/* * struct dma_dev_priv - information about a device used by the uclass * * @supported: mode of transfers that DMA can support, should be @@ -58,6 +41,257 @@ struct dma_dev_priv { u32 supported; }; +#ifdef CONFIG_DMA_CHANNELS +/** + * A DMA is a feature of computer systems that allows certain hardware + * subsystems to access main system memory, independent of the CPU. + * DMA channels are typically generated externally to the HW module + * consuming them, by an entity this API calls a DMA provider. This API + * provides a standard means for drivers to enable and disable DMAs, and to + * copy, send and receive data using DMA. + * + * A driver that implements UCLASS_DMA is a DMA provider. A provider will + * often implement multiple separate DMAs, since the hardware it manages + * often has this capability. dma_uclass.h describes the interface which + * DMA providers must implement. + * + * DMA consumers/clients are the HW modules driven by the DMA channels. This + * header file describes the API used by drivers for those HW modules. + * + * DMA consumer DMA_MEM_TO_DEV (transmit) usage example (based on networking). + * Note. dma_send() is sync operation always - it'll start transfer and will + * poll for it to complete: + * - get/request dma channel + * struct dma dma_tx; + * ret = dma_get_by_name(common->dev, "tx0", &dma_tx); + * if (ret) ... + * + * - enable dma channel + * ret = dma_enable(&dma_tx); + * if (ret) ... + * + * - dma transmit DMA_MEM_TO_DEV. + * struct ti_drv_packet_data packet_data; + * + * packet_data.opt1 = val1; + * packet_data.opt2 = val2; + * ret = dma_send(&dma_tx, packet, length, &packet_data); + * if (ret) .. + * + * DMA consumer DMA_DEV_TO_MEM (receive) usage example (based on networking). + * Note. dma_receive() is sync operation always - it'll start transfer + * (if required) and will poll for it to complete (or for any previously + * configured dev2mem transfer to complete): + * - get/request dma channel + * struct dma dma_rx; + * ret = dma_get_by_name(common->dev, "rx0", &dma_rx); + * if (ret) ... + * + * - enable dma channel + * ret = dma_enable(&dma_rx); + * if (ret) ... + * + * - dma receive DMA_DEV_TO_MEM. + * struct ti_drv_packet_data packet_data; + * + * len = dma_receive(&dma_rx, (void **)packet, &packet_data); + * if (ret < 0) ... + * + * DMA consumer DMA_DEV_TO_MEM (receive) zero-copy usage example (based on + * networking). Networking subsystem allows to configure and use few receive + * buffers (dev2mem), as Networking RX DMA channels usually implemented + * as streaming interface + * - get/request dma channel + * struct dma dma_rx; + * ret = dma_get_by_name(common->dev, "rx0", &dma_rx); + * if (ret) ... + * + * for (i = 0; i < RX_DESC_NUM; i++) { + * ret = dma_prepare_rcv_buf(&dma_rx, + * net_rx_packets[i], + * RX_BUF_SIZE); + * if (ret) ... + * } + * + * - enable dma channel + * ret = dma_enable(&dma_rx); + * if (ret) ... + * + * - dma receive DMA_DEV_TO_MEM. + * struct ti_drv_packet_data packet_data; + * + * len = dma_receive(&dma_rx, (void **)packet, &packet_data); + * if (ret < 0) .. + * + * -- process packet -- + * + * - return buffer back to DAM channel + * ret = dma_prepare_rcv_buf(&dma_rx, + * net_rx_packets[rx_next], + * RX_BUF_SIZE); + */ + +struct udevice; + +/** + * struct dma - A handle to (allowing control of) a single DMA. + * + * Clients provide storage for DMA handles. The content of the structure is + * managed solely by the DMA API and DMA drivers. A DMA struct is + * initialized by "get"ing the DMA struct. The DMA struct is passed to all + * other DMA APIs to identify which DMA channel to operate upon. + * + * @dev: The device which implements the DMA channel. + * @id: The DMA channel ID within the provider. + * + * Currently, the DMA API assumes that a single integer ID is enough to + * identify and configure any DMA channel for any DMA provider. If this + * assumption becomes invalid in the future, the struct could be expanded to + * either (a) add more fields to allow DMA providers to store additional + * information, or (b) replace the id field with an opaque pointer, which the + * provider would dynamically allocated during its .of_xlate op, and process + * during is .request op. This may require the addition of an extra op to clean + * up the allocation. + */ +struct dma { + struct udevice *dev; + /* + * Written by of_xlate. We assume a single id is enough for now. In the + * future, we might add more fields here. + */ + unsigned long id; +}; + +# if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DMA) +/** + * dma_get_by_index - Get/request a DMA by integer index. + * + * This looks up and requests a DMA. The index is relative to the client + * device; each device is assumed to have n DMAs associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device DMA indices to provider DMAs may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @index: The index of the DMA to request, within the client's list of + * DMA channels. + * @dma: A pointer to a DMA struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int dma_get_by_index(struct udevice *dev, int index, struct dma *dma); + +/** + * dma_get_by_name - Get/request a DMA by name. + * + * This looks up and requests a DMA. The name is relative to the client + * device; each device is assumed to have n DMAs associated with it somehow, + * and this function finds and requests one of them. The mapping of client + * device DMA names to provider DMAs may be via device-tree properties, + * board-provided mapping tables, or some other mechanism. + * + * @dev: The client device. + * @name: The name of the DMA to request, within the client's list of + * DMA channels. + * @dma: A pointer to a DMA struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int dma_get_by_name(struct udevice *dev, const char *name, struct dma *dma); +# else +static inline int dma_get_by_index(struct udevice *dev, int index, + struct dma *dma) +{ + return -ENOSYS; +} + +static inline int dma_get_by_name(struct udevice *dev, const char *name, + struct dma *dma) +{ + return -ENOSYS; +} +# endif + +/** + * dma_request - Request a DMA by provider-specific ID. + * + * This requests a DMA using a provider-specific ID. Generally, this function + * should not be used, since dma_get_by_index/name() provide an interface that + * better separates clients from intimate knowledge of DMA providers. + * However, this function may be useful in core SoC-specific code. + * + * @dev: The DMA provider device. + * @dma: A pointer to a DMA struct to initialize. The caller must + * have already initialized any field in this struct which the + * DMA provider uses to identify the DMA channel. + * @return 0 if OK, or a negative error code. + */ +int dma_request(struct udevice *dev, struct dma *dma); + +/** + * dma_free - Free a previously requested DMA. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @return 0 if OK, or a negative error code. + */ +int dma_free(struct dma *dma); + +/** + * dma_enable() - Enable (turn on) a DMA channel. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @return zero on success, or -ve error code. + */ +int dma_enable(struct dma *dma); + +/** + * dma_disable() - Disable (turn off) a DMA channel. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @return zero on success, or -ve error code. + */ +int dma_disable(struct dma *dma); + +/** + * dma_prepare_rcv_buf() - Prepare/add receive DMA buffer. + * + * It allows to implement zero-copy async DMA_DEV_TO_MEM (receive) transactions + * if supported by DMA providers. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @dst: The receive buffer pointer. + * @size: The receive buffer size + * @return zero on success, or -ve error code. + */ +int dma_prepare_rcv_buf(struct dma *dma, void *dst, size_t size); + +/** + * dma_receive() - Receive a DMA transfer. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @dst: The destination pointer. + * @metadata: DMA driver's channel specific data + * @return length of received data on success, or zero - no data, + * or -ve error code. + */ +int dma_receive(struct dma *dma, void **dst, void *metadata); + +/** + * dma_send() - Send a DMA transfer. + * + * @dma: A DMA struct that was previously successfully requested by + * dma_request/get_by_*(). + * @src: The source pointer. + * @len: Length of the data to be sent (number of bytes). + * @metadata: DMA driver's channel specific data + * @return zero on success, or -ve error code. + */ +int dma_send(struct dma *dma, void *src, size_t len, void *metadata); +#endif /* CONFIG_DMA_CHANNELS */ + /* * dma_get_device - get a DMA device which supports transfer * type of transfer_type diff --git a/include/dt-bindings/clock/am3.h b/include/dt-bindings/clock/am3.h new file mode 100644 index 00000000000..86a8806e214 --- /dev/null +++ b/include/dt-bindings/clock/am3.h @@ -0,0 +1,227 @@ +/* + * Copyright 2017 Texas Instruments, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __DT_BINDINGS_CLK_AM3_H +#define __DT_BINDINGS_CLK_AM3_H + +#define AM3_CLKCTRL_OFFSET 0x0 +#define AM3_CLKCTRL_INDEX(offset) ((offset) - AM3_CLKCTRL_OFFSET) + +/* XXX: Compatibility part begin, remove this once compatibility support is no longer needed */ + +/* l4_per clocks */ +#define AM3_L4_PER_CLKCTRL_OFFSET 0x14 +#define AM3_L4_PER_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_PER_CLKCTRL_OFFSET) +#define AM3_CPGMAC0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x14) +#define AM3_LCDC_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x18) +#define AM3_USB_OTG_HS_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x1c) +#define AM3_TPTC0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x24) +#define AM3_EMIF_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x28) +#define AM3_OCMCRAM_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x2c) +#define AM3_GPMC_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x30) +#define AM3_MCASP0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x34) +#define AM3_UART6_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x38) +#define AM3_MMC1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x3c) +#define AM3_ELM_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x40) +#define AM3_I2C3_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x44) +#define AM3_I2C2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x48) +#define AM3_SPI0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x4c) +#define AM3_SPI1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x50) +#define AM3_L4_LS_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x60) +#define AM3_MCASP1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x68) +#define AM3_UART2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x6c) +#define AM3_UART3_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x70) +#define AM3_UART4_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x74) +#define AM3_UART5_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x78) +#define AM3_TIMER7_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x7c) +#define AM3_TIMER2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x80) +#define AM3_TIMER3_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x84) +#define AM3_TIMER4_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x88) +#define AM3_RNG_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x90) +#define AM3_AES_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x94) +#define AM3_SHAM_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xa0) +#define AM3_GPIO2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xac) +#define AM3_GPIO3_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xb0) +#define AM3_GPIO4_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xb4) +#define AM3_TPCC_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xbc) +#define AM3_D_CAN0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xc0) +#define AM3_D_CAN1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xc4) +#define AM3_EPWMSS1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xcc) +#define AM3_EPWMSS0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xd4) +#define AM3_EPWMSS2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xd8) +#define AM3_L3_INSTR_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xdc) +#define AM3_L3_MAIN_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xe0) +#define AM3_PRUSS_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xe8) +#define AM3_TIMER5_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xec) +#define AM3_TIMER6_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xf0) +#define AM3_MMC2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xf4) +#define AM3_MMC3_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xf8) +#define AM3_TPTC1_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0xfc) +#define AM3_TPTC2_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x100) +#define AM3_SPINLOCK_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x10c) +#define AM3_MAILBOX_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x110) +#define AM3_L4_HS_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x120) +#define AM3_OCPWP_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x130) +#define AM3_CLKDIV32K_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x14c) + +/* l4_wkup clocks */ +#define AM3_L4_WKUP_CLKCTRL_OFFSET 0x4 +#define AM3_L4_WKUP_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_WKUP_CLKCTRL_OFFSET) +#define AM3_CONTROL_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0x4) +#define AM3_GPIO1_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0x8) +#define AM3_L4_WKUP_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xc) +#define AM3_DEBUGSS_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0x14) +#define AM3_WKUP_M3_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xb0) +#define AM3_UART1_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xb4) +#define AM3_I2C1_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xb8) +#define AM3_ADC_TSC_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xbc) +#define AM3_SMARTREFLEX0_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xc0) +#define AM3_TIMER1_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xc4) +#define AM3_SMARTREFLEX1_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xc8) +#define AM3_WD_TIMER2_CLKCTRL AM3_L4_WKUP_CLKCTRL_INDEX(0xd4) + +/* mpu clocks */ +#define AM3_MPU_CLKCTRL_OFFSET 0x4 +#define AM3_MPU_CLKCTRL_INDEX(offset) ((offset) - AM3_MPU_CLKCTRL_OFFSET) +#define AM3_MPU_CLKCTRL AM3_MPU_CLKCTRL_INDEX(0x4) + +/* l4_rtc clocks */ +#define AM3_RTC_CLKCTRL AM3_CLKCTRL_INDEX(0x0) + +/* gfx_l3 clocks */ +#define AM3_GFX_L3_CLKCTRL_OFFSET 0x4 +#define AM3_GFX_L3_CLKCTRL_INDEX(offset) ((offset) - AM3_GFX_L3_CLKCTRL_OFFSET) +#define AM3_GFX_CLKCTRL AM3_GFX_L3_CLKCTRL_INDEX(0x4) + +/* l4_cefuse clocks */ +#define AM3_L4_CEFUSE_CLKCTRL_OFFSET 0x20 +#define AM3_L4_CEFUSE_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_CEFUSE_CLKCTRL_OFFSET) +#define AM3_CEFUSE_CLKCTRL AM3_L4_CEFUSE_CLKCTRL_INDEX(0x20) + +/* XXX: Compatibility part end */ + +/* l4ls clocks */ +#define AM3_L4LS_CLKCTRL_OFFSET 0x38 +#define AM3_L4LS_CLKCTRL_INDEX(offset) ((offset) - AM3_L4LS_CLKCTRL_OFFSET) +#define AM3_L4LS_UART6_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x38) +#define AM3_L4LS_MMC1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x3c) +#define AM3_L4LS_ELM_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x40) +#define AM3_L4LS_I2C3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x44) +#define AM3_L4LS_I2C2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x48) +#define AM3_L4LS_SPI0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x4c) +#define AM3_L4LS_SPI1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x50) +#define AM3_L4LS_L4_LS_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x60) +#define AM3_L4LS_UART2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x6c) +#define AM3_L4LS_UART3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x70) +#define AM3_L4LS_UART4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x74) +#define AM3_L4LS_UART5_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x78) +#define AM3_L4LS_TIMER7_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x7c) +#define AM3_L4LS_TIMER2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x80) +#define AM3_L4LS_TIMER3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x84) +#define AM3_L4LS_TIMER4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x88) +#define AM3_L4LS_RNG_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x90) +#define AM3_L4LS_GPIO2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xac) +#define AM3_L4LS_GPIO3_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xb0) +#define AM3_L4LS_GPIO4_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xb4) +#define AM3_L4LS_D_CAN0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xc0) +#define AM3_L4LS_D_CAN1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xc4) +#define AM3_L4LS_EPWMSS1_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xcc) +#define AM3_L4LS_EPWMSS0_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xd4) +#define AM3_L4LS_EPWMSS2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xd8) +#define AM3_L4LS_TIMER5_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xec) +#define AM3_L4LS_TIMER6_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xf0) +#define AM3_L4LS_MMC2_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0xf4) +#define AM3_L4LS_SPINLOCK_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x10c) +#define AM3_L4LS_MAILBOX_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x110) +#define AM3_L4LS_OCPWP_CLKCTRL AM3_L4LS_CLKCTRL_INDEX(0x130) + +/* l3s clocks */ +#define AM3_L3S_CLKCTRL_OFFSET 0x1c +#define AM3_L3S_CLKCTRL_INDEX(offset) ((offset) - AM3_L3S_CLKCTRL_OFFSET) +#define AM3_L3S_USB_OTG_HS_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x1c) +#define AM3_L3S_GPMC_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x30) +#define AM3_L3S_MCASP0_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x34) +#define AM3_L3S_MCASP1_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0x68) +#define AM3_L3S_MMC3_CLKCTRL AM3_L3S_CLKCTRL_INDEX(0xf8) + +/* l3 clocks */ +#define AM3_L3_CLKCTRL_OFFSET 0x24 +#define AM3_L3_CLKCTRL_INDEX(offset) ((offset) - AM3_L3_CLKCTRL_OFFSET) +#define AM3_L3_TPTC0_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x24) +#define AM3_L3_EMIF_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x28) +#define AM3_L3_OCMCRAM_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x2c) +#define AM3_L3_AES_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x94) +#define AM3_L3_SHAM_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xa0) +#define AM3_L3_TPCC_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xbc) +#define AM3_L3_L3_INSTR_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xdc) +#define AM3_L3_L3_MAIN_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xe0) +#define AM3_L3_TPTC1_CLKCTRL AM3_L3_CLKCTRL_INDEX(0xfc) +#define AM3_L3_TPTC2_CLKCTRL AM3_L3_CLKCTRL_INDEX(0x100) + +/* l4hs clocks */ +#define AM3_L4HS_CLKCTRL_OFFSET 0x120 +#define AM3_L4HS_CLKCTRL_INDEX(offset) ((offset) - AM3_L4HS_CLKCTRL_OFFSET) +#define AM3_L4HS_L4_HS_CLKCTRL AM3_L4HS_CLKCTRL_INDEX(0x120) + +/* pruss_ocp clocks */ +#define AM3_PRUSS_OCP_CLKCTRL_OFFSET 0xe8 +#define AM3_PRUSS_OCP_CLKCTRL_INDEX(offset) ((offset) - AM3_PRUSS_OCP_CLKCTRL_OFFSET) +#define AM3_PRUSS_OCP_PRUSS_CLKCTRL AM3_PRUSS_OCP_CLKCTRL_INDEX(0xe8) + +/* cpsw_125mhz clocks */ +#define AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL AM3_CLKCTRL_INDEX(0x14) + +/* lcdc clocks */ +#define AM3_LCDC_CLKCTRL_OFFSET 0x18 +#define AM3_LCDC_CLKCTRL_INDEX(offset) ((offset) - AM3_LCDC_CLKCTRL_OFFSET) +#define AM3_LCDC_LCDC_CLKCTRL AM3_LCDC_CLKCTRL_INDEX(0x18) + +/* clk_24mhz clocks */ +#define AM3_CLK_24MHZ_CLKCTRL_OFFSET 0x14c +#define AM3_CLK_24MHZ_CLKCTRL_INDEX(offset) ((offset) - AM3_CLK_24MHZ_CLKCTRL_OFFSET) +#define AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL AM3_CLK_24MHZ_CLKCTRL_INDEX(0x14c) + +/* l4_wkup clocks */ +#define AM3_L4_WKUP_CONTROL_CLKCTRL AM3_CLKCTRL_INDEX(0x4) +#define AM3_L4_WKUP_GPIO1_CLKCTRL AM3_CLKCTRL_INDEX(0x8) +#define AM3_L4_WKUP_L4_WKUP_CLKCTRL AM3_CLKCTRL_INDEX(0xc) +#define AM3_L4_WKUP_UART1_CLKCTRL AM3_CLKCTRL_INDEX(0xb4) +#define AM3_L4_WKUP_I2C1_CLKCTRL AM3_CLKCTRL_INDEX(0xb8) +#define AM3_L4_WKUP_ADC_TSC_CLKCTRL AM3_CLKCTRL_INDEX(0xbc) +#define AM3_L4_WKUP_SMARTREFLEX0_CLKCTRL AM3_CLKCTRL_INDEX(0xc0) +#define AM3_L4_WKUP_TIMER1_CLKCTRL AM3_CLKCTRL_INDEX(0xc4) +#define AM3_L4_WKUP_SMARTREFLEX1_CLKCTRL AM3_CLKCTRL_INDEX(0xc8) +#define AM3_L4_WKUP_WD_TIMER2_CLKCTRL AM3_CLKCTRL_INDEX(0xd4) + +/* l3_aon clocks */ +#define AM3_L3_AON_CLKCTRL_OFFSET 0x14 +#define AM3_L3_AON_CLKCTRL_INDEX(offset) ((offset) - AM3_L3_AON_CLKCTRL_OFFSET) +#define AM3_L3_AON_DEBUGSS_CLKCTRL AM3_L3_AON_CLKCTRL_INDEX(0x14) + +/* l4_wkup_aon clocks */ +#define AM3_L4_WKUP_AON_CLKCTRL_OFFSET 0xb0 +#define AM3_L4_WKUP_AON_CLKCTRL_INDEX(offset) ((offset) - AM3_L4_WKUP_AON_CLKCTRL_OFFSET) +#define AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL AM3_L4_WKUP_AON_CLKCTRL_INDEX(0xb0) + +/* mpu clocks */ +#define AM3_MPU_MPU_CLKCTRL AM3_CLKCTRL_INDEX(0x4) + +/* l4_rtc clocks */ +#define AM3_L4_RTC_RTC_CLKCTRL AM3_CLKCTRL_INDEX(0x0) + +/* gfx_l3 clocks */ +#define AM3_GFX_L3_GFX_CLKCTRL AM3_CLKCTRL_INDEX(0x4) + +/* l4_cefuse clocks */ +#define AM3_L4_CEFUSE_CEFUSE_CLKCTRL AM3_CLKCTRL_INDEX(0x20) + +#endif diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h index 228ab3b1029..9941cc37a3c 100644 --- a/include/dwc3-uboot.h +++ b/include/dwc3-uboot.h @@ -38,4 +38,23 @@ struct dwc3_device { int dwc3_uboot_init(struct dwc3_device *dev); void dwc3_uboot_exit(int index); void dwc3_uboot_handle_interrupt(int index); + +struct phy; +#if CONFIG_IS_ENABLED(PHY) && CONFIG_IS_ENABLED(DM_USB) +int dwc3_setup_phy(struct udevice *dev, struct phy **array, int *num_phys); +int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, int num_phys); +#else +static inline int dwc3_setup_phy(struct udevice *dev, struct phy **array, + int *num_phys) +{ + return -ENOTSUPP; +} + +static inline int dwc3_shutdown_phy(struct udevice *dev, struct phy *usb_phys, + int num_phys) +{ + return -ENOTSUPP; +} +#endif + #endif /* __DWC3_UBOOT_H_ */ diff --git a/include/hwspinlock.h b/include/hwspinlock.h new file mode 100644 index 00000000000..99389c13c24 --- /dev/null +++ b/include/hwspinlock.h @@ -0,0 +1,140 @@ +/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#ifndef _HWSPINLOCK_H_ +#define _HWSPINLOCK_H_ + +/** + * Implement a hwspinlock uclass. + * Hardware spinlocks are used to perform hardware protection of + * critical sections and synchronisation between multiprocessors. + */ + +struct udevice; + +/** + * struct hwspinlock - A handle to (allowing control of) a single hardware + * spinlock. + * + * @dev: The device which implements the hardware spinlock. + * @id: The hardware spinlock ID within the provider. + */ +struct hwspinlock { + struct udevice *dev; + unsigned long id; +}; + +#if CONFIG_IS_ENABLED(DM_HWSPINLOCK) + +/** + * hwspinlock_get_by_index - Get a hardware spinlock by integer index + * + * This looks up and request a hardware spinlock. The index is relative to the + * client device; each device is assumed to have n hardware spinlock associated + * with it somehow, and this function finds and requests one of them. + * + * @dev: The client device. + * @index: The index of the hardware spinlock to request, within the + * client's list of hardware spinlock. + * @hws: A pointer to a hardware spinlock struct to initialize. + * @return 0 if OK, or a negative error code. + */ +int hwspinlock_get_by_index(struct udevice *dev, + int index, struct hwspinlock *hws); + +/** + * Lock the hardware spinlock + * + * @hws: A hardware spinlock struct that previously requested by + * hwspinlock_get_by_index + * @timeout: Timeout value in msecs + * @return: 0 if OK, -ETIMEDOUT if timeout, -ve on other errors + */ +int hwspinlock_lock_timeout(struct hwspinlock *hws, unsigned int timeout); + +/** + * Unlock the hardware spinlock + * + * @hws: A hardware spinlock struct that previously requested by + * hwspinlock_get_by_index + * @return: 0 if OK, -ve on error + */ +int hwspinlock_unlock(struct hwspinlock *hws); + +#else + +static inline int hwspinlock_get_by_index(struct udevice *dev, + int index, + struct hwspinlock *hws) +{ + return -ENOSYS; +} + +static inline int hwspinlock_lock_timeout(struct hwspinlock *hws, + int timeout) +{ + return -ENOSYS; +} + +static inline int hwspinlock_unlock(struct hwspinlock *hws) +{ + return -ENOSYS; +} + +#endif /* CONFIG_DM_HWSPINLOCK */ + +struct ofnode_phandle_args; + +/** + * struct hwspinlock_ops - Driver model hwspinlock operations + * + * The uclass interface is implemented by all hwspinlock devices which use + * driver model. + */ +struct hwspinlock_ops { + /** + * of_xlate - Translate a client's device-tree (OF) hardware specifier. + * + * The hardware core calls this function as the first step in + * implementing a client's hwspinlock_get_by_*() call. + * + * @hws: The hardware spinlock struct to hold the translation + * result. + * @args: The hardware spinlock specifier values from device tree. + * @return 0 if OK, or a negative error code. + */ + int (*of_xlate)(struct hwspinlock *hws, + struct ofnode_phandle_args *args); + + /** + * Lock the hardware spinlock + * + * @dev: hwspinlock Device + * @index: index of the lock to be used + * @return 0 if OK, -ve on error + */ + int (*lock)(struct udevice *dev, int index); + + /** + * Unlock the hardware spinlock + * + * @dev: hwspinlock Device + * @index: index of the lock to be unlocked + * @return 0 if OK, -ve on error + */ + int (*unlock)(struct udevice *dev, int index); + + /** + * Relax - optional + * Platform-specific relax method, called by hwspinlock core + * while spinning on a lock, between two successive call to + * lock + * + * @dev: hwspinlock Device + */ + void (*relax)(struct udevice *dev); +}; + +#endif /* _HWSPINLOCK_H_ */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index b824f13477b..497798a32a8 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -19,6 +19,7 @@ #define __LINUX_USB_GADGET_H #include <errno.h> +#include <usb.h> #include <linux/compat.h> #include <linux/list.h> @@ -926,4 +927,21 @@ extern void usb_ep_autoconfig_reset(struct usb_gadget *); extern int usb_gadget_handle_interrupts(int index); +#if CONFIG_IS_ENABLED(DM_USB_GADGET) +int usb_gadget_initialize(int index); +int usb_gadget_release(int index); +int dm_usb_gadget_handle_interrupts(struct udevice *dev); +#else +#include <usb.h> +static inline int usb_gadget_initialize(int index) +{ + return board_usb_init(index, USB_INIT_DEVICE); +} + +static inline int usb_gadget_release(int index) +{ + return board_usb_cleanup(index, USB_INIT_DEVICE); +} +#endif + #endif /* __LINUX_USB_GADGET_H */ diff --git a/include/spl.h b/include/spl.h index ee92832f0ae..ff4e6277d34 100644 --- a/include/spl.h +++ b/include/spl.h @@ -52,9 +52,9 @@ static inline bool u_boot_first_phase(void) /* A string name for SPL or TPL */ #ifdef CONFIG_SPL_BUILD # ifdef CONFIG_TPL_BUILD -# define SPL_TPL_NAME "tpl" +# define SPL_TPL_NAME "TPL" # else -# define SPL_TPL_NAME "spl" +# define SPL_TPL_NAME "SPL" # endif # define SPL_TPL_PROMPT SPL_TPL_NAME ": " #else diff --git a/include/syscon.h b/include/syscon.h index 2aa73e520af..3df96e32764 100644 --- a/include/syscon.h +++ b/include/syscon.h @@ -74,6 +74,19 @@ int syscon_get_by_driver_data(ulong driver_data, struct udevice **devp); struct regmap *syscon_get_regmap_by_driver_data(ulong driver_data); /** + * syscon_regmap_lookup_by_phandle() - Look up a controller by a phandle + * + * This operates by looking up the given name in the device (device + * tree property) of the device using the system controller. + * + * @dev: Device using the system controller + * @name: Name of property referring to the system controller + * @return A pointer to the regmap if found, ERR_PTR(-ve) on error + */ +struct regmap *syscon_regmap_lookup_by_phandle(struct udevice *dev, + const char *name); + +/** * syscon_get_first_range() - get the first memory range from a syscon regmap * * @driver_data: Driver data value to look up diff --git a/include/u-boot/crc.h b/include/u-boot/crc.h index e98cb46c90d..788ef29a17b 100644 --- a/include/u-boot/crc.h +++ b/include/u-boot/crc.h @@ -11,6 +11,20 @@ /* lib/crc8.c */ unsigned int crc8(unsigned int crc_start, const unsigned char *vptr, int len); +/* lib/crc16.c - 16 bit CRC with polynomial x^16+x^12+x^5+1 (CRC-CCITT) */ +uint16_t crc16_ccitt(uint16_t crc_start, const unsigned char *s, int len); +/** + * crc16_ccitt_wd_buf - Perform CRC16-CCIT on an input buffer and return the + * 16-bit result (network byte-order) in an output buffer + * + * @in: input buffer + * @len: input buffer length + * @out: output buffer (at least 2 bytes) + * @chunk_sz: ignored + */ +void crc16_ccitt_wd_buf(const uint8_t *in, uint len, + uint8_t *out, uint chunk_sz); + /* lib/crc32.c */ uint32_t crc32 (uint32_t, const unsigned char *, uint); uint32_t crc32_wd (uint32_t, const unsigned char *, uint, uint); diff --git a/lib/Makefile b/lib/Makefile index 8321355a44f..a6dd928a926 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -76,6 +76,7 @@ endif ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o +obj-$(CONFIG_$(SPL_TPL_)HASH_SUPPORT) += crc16.o obj-$(CONFIG_SPL_NET_SUPPORT) += net_utils.o endif obj-$(CONFIG_ADDR_MAP) += addr_map.o diff --git a/lib/crc16.c b/lib/crc16.c index 763ae33f341..f46ba727c9a 100644 --- a/lib/crc16.c +++ b/lib/crc16.c @@ -22,7 +22,12 @@ *========================================================================== */ -#include "crc.h" +#ifdef USE_HOSTCC +#include <arpa/inet.h> +#else +#include <common.h> +#endif +#include <u-boot/crc.h> /* Table of CRC constants - implements x^16+x^12+x^5+1 */ static const uint16_t crc16_tab[] = { @@ -60,14 +65,20 @@ static const uint16_t crc16_tab[] = { 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0, }; -uint16_t crc16_ccitt(uint16_t crc_start, unsigned char *buf, int len) +uint16_t crc16_ccitt(uint16_t cksum, const unsigned char *buf, int len) { - int i; - uint16_t cksum; - - cksum = crc_start; - for (i = 0; i < len; i++) + for (int i = 0; i < len; i++) cksum = crc16_tab[((cksum>>8) ^ *buf++) & 0xff] ^ (cksum << 8); return cksum; } + +void crc16_ccitt_wd_buf(const uint8_t *in, uint len, + uint8_t *out, uint chunk_sz) +{ + uint16_t crc; + + crc = crc16_ccitt(0, in, len); + crc = htons(crc); + memcpy(out, &crc, sizeof(crc)); +} diff --git a/test/dm/Makefile b/test/dm/Makefile index 213e0fda946..2c9081e4dd6 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_CLK) += clk.o obj-$(CONFIG_DM_ETH) += eth.o obj-$(CONFIG_FIRMWARE) += firmware.o obj-$(CONFIG_DM_GPIO) += gpio.o +obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock.o obj-$(CONFIG_DM_I2C) += i2c.o obj-$(CONFIG_LED) += led.o obj-$(CONFIG_DM_MAILBOX) += mailbox.o @@ -54,4 +55,5 @@ obj-$(CONFIG_DM_SERIAL) += serial.o obj-$(CONFIG_CPU) += cpu.o obj-$(CONFIG_TEE) += tee.o obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o +obj-$(CONFIG_DMA) += dma.o endif diff --git a/test/dm/dma.c b/test/dm/dma.c new file mode 100644 index 00000000000..b56d17731d5 --- /dev/null +++ b/test/dm/dma.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Direct Memory Access U-Class tests + * + * Copyright (C) 2018 Texas Instruments Incorporated <www.ti.com> + * Grygorii Strashko <grygorii.strashko@ti.com> + */ + +#include <common.h> +#include <dm.h> +#include <dm/test.h> +#include <dma.h> +#include <test/ut.h> + +static int dm_test_dma_m2m(struct unit_test_state *uts) +{ + struct udevice *dev; + struct dma dma_m2m; + u8 src_buf[512]; + u8 dst_buf[512]; + size_t len = 512; + int i; + + ut_assertok(uclass_get_device_by_name(UCLASS_DMA, "dma", &dev)); + ut_assertok(dma_get_by_name(dev, "m2m", &dma_m2m)); + + memset(dst_buf, 0, len); + for (i = 0; i < len; i++) + src_buf[i] = i; + + ut_assertok(dma_memcpy(dst_buf, src_buf, len)); + + ut_assertok(memcmp(src_buf, dst_buf, len)); + return 0; +} +DM_TEST(dm_test_dma_m2m, DM_TESTF_SCAN_FDT); + +static int dm_test_dma(struct unit_test_state *uts) +{ + struct udevice *dev; + struct dma dma_tx, dma_rx; + u8 src_buf[512]; + u8 dst_buf[512]; + void *dst_ptr; + size_t len = 512; + u32 meta1, meta2; + int i; + + ut_assertok(uclass_get_device_by_name(UCLASS_DMA, "dma", &dev)); + + ut_assertok(dma_get_by_name(dev, "tx0", &dma_tx)); + ut_assertok(dma_get_by_name(dev, "rx0", &dma_rx)); + + ut_assertok(dma_enable(&dma_tx)); + ut_assertok(dma_enable(&dma_rx)); + + memset(dst_buf, 0, len); + for (i = 0; i < len; i++) + src_buf[i] = i; + meta1 = 0xADADDEAD; + meta2 = 0; + dst_ptr = &dst_buf; + + ut_assertok(dma_send(&dma_tx, src_buf, len, &meta1)); + + ut_asserteq(len, dma_receive(&dma_rx, &dst_ptr, &meta2)); + ut_asserteq(0xADADDEAD, meta2); + + ut_assertok(dma_disable(&dma_tx)); + ut_assertok(dma_disable(&dma_rx)); + + ut_assertok(dma_free(&dma_tx)); + ut_assertok(dma_free(&dma_rx)); + ut_assertok(memcmp(src_buf, dst_buf, len)); + + return 0; +} +DM_TEST(dm_test_dma, DM_TESTF_SCAN_FDT); + +static int dm_test_dma_rx(struct unit_test_state *uts) +{ + struct udevice *dev; + struct dma dma_tx, dma_rx; + u8 src_buf[512]; + u8 dst_buf[512]; + void *dst_ptr; + size_t len = 512; + u32 meta1, meta2; + int i; + + ut_assertok(uclass_get_device_by_name(UCLASS_DMA, "dma", &dev)); + + ut_assertok(dma_get_by_name(dev, "tx0", &dma_tx)); + ut_assertok(dma_get_by_name(dev, "rx0", &dma_rx)); + + ut_assertok(dma_enable(&dma_tx)); + ut_assertok(dma_enable(&dma_rx)); + + memset(dst_buf, 0, len); + for (i = 0; i < len; i++) + src_buf[i] = i; + meta1 = 0xADADDEAD; + meta2 = 0; + dst_ptr = NULL; + + ut_assertok(dma_prepare_rcv_buf(&dma_tx, dst_buf, len)); + + ut_assertok(dma_send(&dma_tx, src_buf, len, &meta1)); + + ut_asserteq(len, dma_receive(&dma_rx, &dst_ptr, &meta2)); + ut_asserteq(0xADADDEAD, meta2); + ut_asserteq_ptr(dst_buf, dst_ptr); + + ut_assertok(dma_disable(&dma_tx)); + ut_assertok(dma_disable(&dma_rx)); + + ut_assertok(dma_free(&dma_tx)); + ut_assertok(dma_free(&dma_rx)); + ut_assertok(memcmp(src_buf, dst_buf, len)); + + return 0; +} +DM_TEST(dm_test_dma_rx, DM_TESTF_SCAN_FDT); diff --git a/test/dm/hwspinlock.c b/test/dm/hwspinlock.c new file mode 100644 index 00000000000..09ec38b4f37 --- /dev/null +++ b/test/dm/hwspinlock.c @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2018, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <dm.h> +#include <hwspinlock.h> +#include <asm/state.h> +#include <asm/test.h> +#include <dm/test.h> +#include <test/ut.h> + +/* Test that hwspinlock driver functions are called */ +static int dm_test_hwspinlock_base(struct unit_test_state *uts) +{ + struct sandbox_state *state = state_get_current(); + struct hwspinlock hws; + + ut_assertok(uclass_get_device(UCLASS_HWSPINLOCK, 0, &hws.dev)); + ut_assertnonnull(hws.dev); + ut_asserteq(false, state->hwspinlock); + + hws.id = 0; + ut_assertok(hwspinlock_lock_timeout(&hws, 1)); + ut_asserteq(true, state->hwspinlock); + + ut_assertok(hwspinlock_unlock(&hws)); + ut_asserteq(false, state->hwspinlock); + + ut_assertok(hwspinlock_lock_timeout(&hws, 1)); + ut_assertok(!hwspinlock_lock_timeout(&hws, 1)); + + ut_assertok(hwspinlock_unlock(&hws)); + ut_assertok(!hwspinlock_unlock(&hws)); + + return 0; +} + +DM_TEST(dm_test_hwspinlock_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/dm/syscon.c b/test/dm/syscon.c index 77c79285d93..a294dda02e7 100644 --- a/test/dm/syscon.c +++ b/test/dm/syscon.c @@ -6,6 +6,7 @@ #include <common.h> #include <dm.h> #include <syscon.h> +#include <regmap.h> #include <asm/test.h> #include <dm/test.h> #include <test/ut.h> @@ -43,3 +44,31 @@ static int dm_test_syscon_by_driver_data(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_syscon_by_driver_data, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); + +/* Test system controller by phandle */ +static int dm_test_syscon_by_phandle(struct unit_test_state *uts) +{ + struct udevice *dev; + struct regmap *map; + + ut_assertok(uclass_get_device_by_name(UCLASS_TEST_PROBE, "test4", + &dev)); + + ut_assertok_ptr(syscon_regmap_lookup_by_phandle(dev, "first-syscon")); + map = syscon_regmap_lookup_by_phandle(dev, "first-syscon"); + ut_assert(map); + ut_assert(!IS_ERR(map)); + ut_asserteq(1, map->range_count); + + ut_assertok_ptr(syscon_regmap_lookup_by_phandle(dev, + "second-sys-ctrl")); + map = syscon_regmap_lookup_by_phandle(dev, "second-sys-ctrl"); + ut_assert(map); + ut_assert(!IS_ERR(map)); + ut_asserteq(4, map->range_count); + + ut_assert(IS_ERR(syscon_regmap_lookup_by_phandle(dev, "not-present"))); + + return 0; +} +DM_TEST(dm_test_syscon_by_phandle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT); diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py index e044eb3ea1d..326b2ac51fb 100644 --- a/test/py/u_boot_console_base.py +++ b/test/py/u_boot_console_base.py @@ -16,7 +16,7 @@ import sys import u_boot_spawn # Regexes for text we expect U-Boot to send to the console. -pattern_u_boot_spl_signon = re.compile('(U-Boot spl \\d{4}\\.\\d{2}[^\r\n]*\\))') +pattern_u_boot_spl_signon = re.compile('(U-Boot SPL \\d{4}\\.\\d{2}[^\r\n]*\\))') pattern_u_boot_main_signon = re.compile('(U-Boot \\d{4}\\.\\d{2}[^\r\n]*\\))') pattern_stop_autoboot_prompt = re.compile('Hit any key to stop autoboot: ') pattern_unknown_command = re.compile('Unknown command \'.*\' - try \'help\'') diff --git a/tools/Makefile b/tools/Makefile index c93d17a42fd..c26b631560e 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -106,6 +106,7 @@ dumpimage-mkimage-objs := aisimage.o \ stm32image.o \ $(ROCKCHIP_OBS) \ socfpgaimage.o \ + lib/crc16.o \ lib/sha1.o \ lib/sha256.o \ common/hash.o \ |