diff options
209 files changed, 2282 insertions, 12780 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 12fa853cac..c43057484c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -104,8 +104,6 @@ Wolfgang Denk <wd@denx.de> ARIA MPC5121e - AMX860 MPC860 - ETX094 MPC850 FPS850L MPC850 FPS860L MPC860 ICU862 MPC862 @@ -116,7 +114,6 @@ Wolfgang Denk <wd@denx.de> IVMS8 MPC860 IVMS8_128 MPC860 IVMS8_256 MPC860 - LANTEC MPC850 LWMON MPC823 R360MPI MPC823 RRvision MPC823 @@ -128,7 +125,6 @@ Wolfgang Denk <wd@denx.de> TQM855L MPC855 TQM860L MPC860 TQM860L_FEC MPC860 - c2mon MPC855 hermes MPC860 lwmon MPC823 @@ -227,7 +223,6 @@ Wolfgang Grandegger <wg@denx.de> PN62 MPC8240 IPHASE4539 MPC8260 - SCM MPC8260 Anatolij Gustschin <agust@denx.de> @@ -543,7 +538,6 @@ Unknown / orphaned boards: FADS850SAR MPC8xx FADS860T MPC8xx GENIETV MPC8xx - IAD210 MPC8xx MBX MPC8xx MBX860T MPC8xx NX823 MPC8xx @@ -640,7 +640,7 @@ build_target() { fi if [ $BUILD_MANY == 1 ] ; then - ${MAKE} tidy + ${MAKE} -s tidy if [ -s ${LOG_DIR}/${target}.ERR ] ; then cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target} @@ -21,10 +21,10 @@ # MA 02111-1307 USA # -VERSION = 2012 -PATCHLEVEL = 10 +VERSION = 2013 +PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -260,7 +260,8 @@ LIBS-y += drivers/net/npe/libnpe.o endif LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o -LIBS-y += fs/cbfs/libcbfs.o \ +LIBS-y += fs/libfs.o \ + fs/cbfs/libcbfs.o \ fs/cramfs/libcramfs.o \ fs/ext4/libext4fs.o \ fs/fat/libfat.o \ @@ -811,9 +811,11 @@ The following options need to be configured: CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx CONFIG_CMD_EXPORTENV * export the environment + CONFIG_CMD_EXT2 * ext2 command support + CONFIG_CMD_EXT4 * ext4 command support CONFIG_CMD_SAVEENV saveenv CONFIG_CMD_FDC * Floppy Disk Support - CONFIG_CMD_FAT * FAT partition support + CONFIG_CMD_FAT * FAT command support CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support @@ -1043,6 +1045,9 @@ The following options need to be configured: devices. CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) + The environment variable 'scsidevs' is set to the number of + SCSI devices found during the last scan. + - NETWORK Support (PCI): CONFIG_E1000 Support for Intel 8254x/8257x gigabit chips. @@ -2186,8 +2191,8 @@ CBFS (Coreboot Filesystem) support following board configurations are known to be "pRAM-clean": - ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, - HERMES, IP860, RPXlite, LWMON, LANTEC, + IVMS8, IVML24, SPD8xx, TQM8xxL, + HERMES, IP860, RPXlite, LWMON, FLAGADM, TQM8260 - Error Recovery: @@ -2313,6 +2318,12 @@ CBFS (Coreboot Filesystem) support - CONFIG_SYS_VENDOR - CONFIG_SYS_SOC + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + + Define this in order to add variables describing certain + run-time determined information about the hardware to the + environment. These will be named board_name, board_rev. + - DataFlash Support: CONFIG_HAS_DATAFLASH diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c index e26fec1f95..16876aeea8 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -168,10 +168,6 @@ static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff }; #define tdm_extra_clk {TDM_PLL, 1} #define tdm1_clk {TDM_PLL, 2} -/* Optimization barrier */ -#define barrier() \ - __asm__ __volatile__("mov r0, r0\n" : : : "memory"); - static const struct lpsc_map lpsc_clk_map[] = { [TNETV107X_LPSC_ARM] = sys_arm1176_clk, [TNETV107X_LPSC_GEM] = sys_dsp_clk, diff --git a/arch/powerpc/cpu/74xx_7xx/traps.c b/arch/powerpc/cpu/74xx_7xx/traps.c index 7ae81eb7f3..a33e28368e 100644 --- a/arch/powerpc/cpu/74xx_7xx/traps.c +++ b/arch/powerpc/cpu/74xx_7xx/traps.c @@ -48,8 +48,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -69,8 +68,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void -show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -100,16 +98,14 @@ show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -152,8 +148,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -164,8 +159,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL; int i, j; @@ -190,8 +184,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -202,9 +195,7 @@ SoftEmuException(struct pt_regs *regs) panic("Software Emulation Exception"); } - -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -218,8 +209,7 @@ UnknownException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c index 786f4a5a7e..15468e5824 100644 --- a/arch/powerpc/cpu/mpc512x/traps.c +++ b/arch/powerpc/cpu/mpc512x/traps.c @@ -47,68 +47,65 @@ extern ulong get_effective_memsize(void); * Trap & Exception support */ -void -print_backtrace (unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; - puts ("Call backtrace: "); + puts("Call backtrace: "); while (sp) { if ((uint)sp > END_OF_MEM) break; i = sp[1]; if (cnt++ % 7 == 0) - putc ('\n'); - printf ("%08lX ", i); + putc('\n'); + printf("%08lX ", i); if (cnt > 32) break; sp = (unsigned long *) *sp; } - putc ('\n'); + putc('\n'); } -void show_regs (struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; - printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0); - putc ('\n'); + putc('\n'); for (i = 0; i < 32; i++) { if ((i % 8) == 0) { - printf ("GPR%02d: ", i); + printf("GPR%02d: ", i); } - printf ("%08lX ", regs->gpr[i]); + printf("%08lX ", regs->gpr[i]); if ((i % 8) == 7) { - putc ('\n'); + putc('\n'); } } } -void -_exception (int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Exception at pc %lx signal %d", regs->nip,signr); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception at pc %lx signal %d", regs->nip, signr); } -void -MachineCheckException (struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; + unsigned long fixup = search_exception_table(regs->nip); - if ((fixup = search_exception_table (regs->nip)) != 0) { + if (fixup) { regs->nip = fixup; return; } @@ -118,95 +115,90 @@ MachineCheckException (struct pt_regs *regs) return; #endif - puts ("Machine check.\nCaused by (from msr): "); - printf ("regs %p ",regs); + puts("Machine check.\nCaused by (from msr): "); + printf("regs %p ", regs); switch (regs->msr & 0x00FF0000) { case (0x80000000 >> 10): - puts ("Instruction cache parity signal\n"); + puts("Instruction cache parity signal\n"); break; case (0x80000000 >> 11): - puts ("Data cache parity signal\n"); + puts("Data cache parity signal\n"); break; case (0x80000000 >> 12): - puts ("Machine check signal\n"); + puts("Machine check signal\n"); break; case (0x80000000 >> 13): - puts ("Transfer error ack signal\n"); + puts("Transfer error ack signal\n"); break; case (0x80000000 >> 14): - puts ("Data parity signal\n"); + puts("Data parity signal\n"); break; case (0x80000000 >> 15): - puts ("Address parity signal\n"); + puts("Address parity signal\n"); break; default: - puts ("Unknown values in msr\n"); + puts("Unknown values in msr\n"); } - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); - panic ("machine check"); + panic("machine check"); } -void -AlignmentException (struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Alignment Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); } -void -ProgramCheckException (struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Program Check Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); } -void -SoftEmuException (struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Software Emulation Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); } -void -UnknownException (struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception (0, regs); + _exception(0, regs); } #ifdef CONFIG_CMD_BEDBUG -extern void do_bedbug_breakpoint (struct pt_regs *); +extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException (struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { - printf ("Debugger trap at @ %lx\n", regs->nip ); - show_regs (regs); + printf("Debugger trap at @ %lx\n", regs->nip); + show_regs(regs); #ifdef CONFIG_CMD_BEDBUG - do_bedbug_breakpoint (regs); + do_bedbug_breakpoint(regs); #endif } diff --git a/arch/powerpc/cpu/mpc5xx/traps.c b/arch/powerpc/cpu/mpc5xx/traps.c index e3ce11b2b3..90da73bc73 100644 --- a/arch/powerpc/cpu/mpc5xx/traps.c +++ b/arch/powerpc/cpu/mpc5xx/traps.c @@ -52,7 +52,7 @@ extern unsigned long search_exception_table(unsigned long); /* * Print stack backtrace */ -void print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -75,7 +75,7 @@ void print_backtrace(unsigned long *sp) /* * Print current registers */ -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", @@ -105,7 +105,7 @@ void show_regs(struct pt_regs * regs) /* * General exception handler routine */ -void _exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); diff --git a/arch/powerpc/cpu/mpc5xxx/traps.c b/arch/powerpc/cpu/mpc5xxx/traps.c index 5972f34579..438f8d3203 100644 --- a/arch/powerpc/cpu/mpc5xxx/traps.c +++ b/arch/powerpc/cpu/mpc5xxx/traps.c @@ -49,8 +49,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -70,7 +69,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -98,16 +97,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -152,8 +149,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -164,8 +160,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -176,8 +171,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -189,8 +183,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -205,8 +198,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -219,8 +211,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c index 13894c9050..19d6cb57cf 100644 --- a/arch/powerpc/cpu/mpc8220/traps.c +++ b/arch/powerpc/cpu/mpc8220/traps.c @@ -39,7 +39,7 @@ #include <asm/processor.h> /* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table (unsigned long); +extern unsigned long search_exception_table(unsigned long); /* THIS NEEDS CHANGING to use the board info structure. */ @@ -49,171 +49,166 @@ extern unsigned long search_exception_table (unsigned long); * Trap & Exception support */ -void print_backtrace (unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; - printf ("Call backtrace: "); + printf("Call backtrace: "); while (sp) { if ((uint) sp > END_OF_MEM) break; i = sp[1]; if (cnt++ % 7 == 0) - printf ("\n"); - printf ("%08lX ", i); + printf("\n"); + printf("%08lX ", i); if (cnt > 32) break; sp = (unsigned long *) *sp; } - printf ("\n"); + printf("\n"); } -void show_regs (struct pt_regs *regs) +void show_regs(struct pt_regs *regs) { int i; - printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0); - printf ("\n"); + printf("\n"); for (i = 0; i < 32; i++) { if ((i % 8) == 0) { - printf ("GPR%02d: ", i); + printf("GPR%02d: ", i); } - printf ("%08lX ", regs->gpr[i]); + printf("%08lX ", regs->gpr[i]); if ((i % 8) == 7) { - printf ("\n"); + printf("\n"); } } } -void _exception (int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Exception in kernel pc %lx signal %d", regs->nip, signr); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d", regs->nip, signr); } -void MachineCheckException (struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; + unsigned long fixup = search_exception_table(regs->nip); /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to * the PCI exception handler. */ - if ((fixup = search_exception_table (regs->nip)) != 0) { + if (fixup) { regs->nip = fixup; return; } #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Machine check in kernel mode.\n"); - printf ("Caused by (from msr): "); - printf ("regs %p ", regs); + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ", regs); /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */ switch (regs->msr & 0x000F0000) { case (0x80000000 >> 12): - printf ("Machine check signal - probably due to mm fault\n" + printf("Machine check signal - probably due to mm fault\n" "with mmu off\n"); break; case (0x80000000 >> 13): - printf ("Transfer error ack signal\n"); + printf("Transfer error ack signal\n"); break; case (0x80000000 >> 14): - printf ("Data parity signal\n"); + printf("Data parity signal\n"); break; case (0x80000000 >> 15): - printf ("Address parity signal\n"); + printf("Address parity signal\n"); break; default: - printf ("Unknown values in msr\n"); + printf("Unknown values in msr\n"); } - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("machine check"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("machine check"); } -void AlignmentException (struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Alignment Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Alignment Exception"); } -void ProgramCheckException (struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Program Check Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Program Check Exception"); } -void SoftEmuException (struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Software Emulation Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Software Emulation Exception"); } -void UnknownException (struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception (0, regs); + _exception(0, regs); } #if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint (struct pt_regs *); +extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void DebugException (struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { - printf ("Debugger trap at @ %lx\n", regs->nip); - show_regs (regs); + printf("Debugger trap at @ %lx\n", regs->nip); + show_regs(regs); #if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint (regs); + do_bedbug_breakpoint(regs); #endif } /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int addr_probe (uint * addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc824x/traps.c b/arch/powerpc/cpu/mpc824x/traps.c index 163b983340..9bcdd8f4ea 100644 --- a/arch/powerpc/cpu/mpc824x/traps.c +++ b/arch/powerpc/cpu/mpc824x/traps.c @@ -46,8 +46,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -67,7 +66,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -95,16 +94,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -142,24 +139,21 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -167,8 +161,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); @@ -179,8 +172,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -193,8 +185,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8260/traps.c b/arch/powerpc/cpu/mpc8260/traps.c index c116cdf69d..e1e68458e8 100644 --- a/arch/powerpc/cpu/mpc8260/traps.c +++ b/arch/powerpc/cpu/mpc8260/traps.c @@ -49,8 +49,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -70,7 +69,7 @@ print_backtrace(unsigned long *sp) putc ('\n'); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -96,8 +95,7 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -122,8 +120,7 @@ void dump_pci (void) } #endif -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -180,8 +177,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -192,8 +188,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -204,8 +199,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -217,8 +211,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -233,8 +226,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -247,8 +239,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c index 028c8f0d58..1f54781b7e 100644 --- a/arch/powerpc/cpu/mpc83xx/fdt.c +++ b/arch/powerpc/cpu/mpc83xx/fdt.c @@ -88,7 +88,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 }; path = fdt_path_offset(blob, prop); - prop = fdt_getprop(blob, path, "interrupts", 0); + prop = fdt_getprop(blob, path, "interrupts", + NULL); if (prop) fdt_setprop(blob, path, "interrupts", &tmp, sizeof(tmp)); @@ -100,7 +101,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 }; path = fdt_path_offset(blob, prop); - prop = fdt_getprop(blob, path, "interrupts", 0); + prop = fdt_getprop(blob, path, "interrupts", + NULL); if (prop) fdt_setprop(blob, path, "interrupts", &tmp, sizeof(tmp)); diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index fb0f7aad6d..b8c05d1592 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -52,7 +52,7 @@ typedef struct { mult_t vco_divider; } corecnf_t; -corecnf_t corecnf_tab[] = { +static corecnf_t corecnf_tab[] = { {_byp, _byp}, /* 0x00 */ {_byp, _byp}, /* 0x01 */ {_byp, _byp}, /* 0x02 */ @@ -531,7 +531,7 @@ ulong get_ddr_freq(ulong dummy) return gd->mem_clk; } -int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; diff --git a/arch/powerpc/cpu/mpc83xx/traps.c b/arch/powerpc/cpu/mpc83xx/traps.c index 9d71b8b730..53a1062ea8 100644 --- a/arch/powerpc/cpu/mpc83xx/traps.c +++ b/arch/powerpc/cpu/mpc83xx/traps.c @@ -42,8 +42,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -63,7 +62,7 @@ print_backtrace(unsigned long *sp) putc ('\n'); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -89,8 +88,7 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -114,8 +112,7 @@ void dump_pci (void) } #endif -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -174,8 +171,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -186,8 +182,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -198,8 +193,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -211,8 +205,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -227,8 +220,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -240,8 +232,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 736293c41d..f01804bbb9 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -182,7 +182,7 @@ static void enable_cpc(void) printf("Corenet Platform Cache: %d KB enabled\n", size); } -void invalidate_cpc(void) +static void invalidate_cpc(void) { int i; cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index e6b1b1b7ee..7f466ac6a9 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -489,7 +489,7 @@ static void wait_for_rstdone(unsigned int bank) } -void __soc_serdes_init(void) +static void __soc_serdes_init(void) { /* Allow for SoC-specific initialization in <SOC>_serdes.c */ }; diff --git a/arch/powerpc/cpu/mpc85xx/traps.c b/arch/powerpc/cpu/mpc85xx/traps.c index 78007177a1..476ae93594 100644 --- a/arch/powerpc/cpu/mpc85xx/traps.c +++ b/arch/powerpc/cpu/mpc85xx/traps.c @@ -82,8 +82,7 @@ extern void do_bedbug_breakpoint(struct pt_regs *); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -103,7 +102,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -131,24 +130,21 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -CritcalInputException(struct pt_regs *regs) +void CritcalInputException(struct pt_regs *regs) { panic("Critical Input Exception"); } int machinecheck_count = 0; int machinecheck_error = 0; -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; unsigned int mcsr, mcsrr0, mcsrr1, mcar; @@ -220,8 +216,7 @@ MachineCheckException(struct pt_regs *regs) } } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -233,8 +228,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { long esr_val; @@ -257,8 +251,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -PITException(struct pt_regs *regs) +void PITException(struct pt_regs *regs) { /* * Reset PIT interrupt @@ -271,9 +264,7 @@ PITException(struct pt_regs *regs) timer_interrupt(NULL); } - -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -285,8 +276,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -ExtIntException(struct pt_regs *regs) +void ExtIntException(struct pt_regs *regs) { volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); @@ -305,8 +295,7 @@ ExtIntException(struct pt_regs *regs) print_backtrace((unsigned long *)regs->gpr[1]); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -318,8 +307,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { return 0; } diff --git a/arch/powerpc/cpu/mpc86xx/traps.c b/arch/powerpc/cpu/mpc86xx/traps.c index 406403e512..50069d55f5 100644 --- a/arch/powerpc/cpu/mpc86xx/traps.c +++ b/arch/powerpc/cpu/mpc86xx/traps.c @@ -52,8 +52,7 @@ extern ulong get_effective_memsize(void); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -74,8 +73,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void -show_regs(struct pt_regs *regs) +void show_regs(struct pt_regs *regs) { int i; @@ -103,16 +101,14 @@ show_regs(struct pt_regs *regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d", regs->nip, signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -158,8 +154,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -170,8 +165,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL; int i, j; @@ -196,8 +190,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -208,8 +201,7 @@ SoftEmuException(struct pt_regs *regs) panic("Software Emulation Exception"); } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -226,8 +218,7 @@ UnknownException(struct pt_regs *regs) * If not present, return -1, * otherwise return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { return 0; } diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index b348a98c58..d7c9090941 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -460,7 +460,7 @@ static void fec_pin_init(int fecidx) #endif /* !CONFIG_RMII */ -#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210) +#elif !defined(CONFIG_ICU862) /* * Configure all of port D for MII. */ diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 2c93e24f3c..2ef77b4c14 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -473,20 +473,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) *((uint *) BCSR1) &= ~BCSR1_ETHEN; #endif /* MPC860ADS */ -#if defined(CONFIG_AMX860) - /* - * Port B is used to control the PHY,MC68160. - */ - immr->im_cpm.cp_pbdir |= - (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL); - - immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL; - immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL); - - immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN; - immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN; -#endif /* AMX860 */ - #ifdef CONFIG_RPXCLASSIC *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); @@ -542,7 +528,7 @@ static int scc_init (struct eth_device *dev, bd_t * bis) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC) +#elif defined(CONFIG_RPXCLASSIC) udelay (100000); /* wait 100 ms */ #endif diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c index 343dced31f..f0ab78daf9 100644 --- a/arch/powerpc/cpu/mpc8xx/traps.c +++ b/arch/powerpc/cpu/mpc8xx/traps.c @@ -52,8 +52,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -73,7 +72,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -101,16 +100,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -153,8 +150,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -165,8 +161,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -177,8 +172,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -190,8 +184,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -202,8 +195,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -215,8 +207,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 2c487cac20..e8613be393 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; -struct cpu_type cpu_type_list [] = { +static struct cpu_type cpu_type_list[] = { #if defined(CONFIG_MPC85xx) CPU_TYPE_ENTRY(8533, 8533, 1), CPU_TYPE_ENTRY(8535, 8535, 1), @@ -125,7 +125,7 @@ u32 compute_ppc_cpumask(void) #define compute_ppc_cpumask() 1 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ -struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0); +static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0); struct cpu_type *identify_cpu(u32 ver) { @@ -143,7 +143,7 @@ struct cpu_type *identify_cpu(u32 ver) /* * Return a 32-bit mask indicating which cores are present on this SOC. */ -u32 cpu_mask() +u32 cpu_mask(void) { ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; struct cpu_type *cpu = gd->cpu; @@ -162,7 +162,8 @@ u32 cpu_mask() /* * Return the number of cores on this SOC. */ -int cpu_numcores() { +int cpu_numcores(void) +{ struct cpu_type *cpu = gd->cpu; /* diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 5928eb8806..088cc0e855 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -28,7 +28,7 @@ #error "Undefined _DDR_ADDR" #endif -u32 fsl_ddr_get_version(void) +static u32 fsl_ddr_get_version(void) { ccsr_ddr_t *ddr; u32 ver_major_minor_errata; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 6a1f4e4e38..9adde31010 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -11,7 +11,8 @@ #include "ddr.h" -unsigned int +#if defined(CONFIG_FSL_DDR3) +static unsigned int compute_cas_latency_ddr3(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) @@ -65,6 +66,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, return 0; } +#endif /* * compute_lowest_common_dimm_parameters() diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index 023ac9ab30..c1fe5790a3 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -11,7 +11,7 @@ #ifdef CONFIG_MPC85xx /* Boards should provide their own version of this if they use lbc sdram */ -void __lbc_sdram_init(void) +static void __lbc_sdram_init(void) { /* Do nothing */ } diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c index 9baa7a16d1..dae19cba58 100644 --- a/arch/powerpc/cpu/ppc4xx/traps.c +++ b/arch/powerpc/cpu/ppc4xx/traps.c @@ -74,8 +74,7 @@ extern void do_bedbug_breakpoint(struct pt_regs *); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -95,7 +94,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -121,16 +120,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception"); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup, val; #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) @@ -312,8 +309,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -325,8 +321,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { long esr_val; @@ -349,8 +344,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -DecrementerPITException(struct pt_regs *regs) +void DecrementerPITException(struct pt_regs *regs) { /* * Reset PIT interrupt @@ -364,8 +358,7 @@ DecrementerPITException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -377,8 +370,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 9e208618d9..1f12c29ba8 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -127,7 +127,6 @@ static inline void isync(void) /* * Non ordered and non-swapping "raw" accessors */ -#define __iomem #define PCI_FIX_ADDR(addr) (addr) static inline unsigned char __raw_readb(const volatile void __iomem *addr) diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h index d570d7915e..e35d9b677a 100644 --- a/arch/powerpc/include/asm/ppc4xx-sdram.h +++ b/arch/powerpc/include/asm/ppc4xx-sdram.h @@ -1404,7 +1404,7 @@ struct sdram_timing { /* * Prototypes */ -inline void ppc4xx_ibm_ddr2_register_dump(void); +void ppc4xx_ibm_ddr2_register_dump(void); u32 mfdcr_any(u32); void mtdcr_any(u32, u32); u32 ddr_wrdtr(u32); diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index ebf400851a..1b051e11c4 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -163,7 +163,7 @@ static int init_baudrate(void) /***********************************************************************/ -void __board_add_ram_info(int use_default) +static void __board_add_ram_info(int use_default) { /* please define platform specific board_add_ram_info() */ } @@ -171,7 +171,7 @@ void __board_add_ram_info(int use_default) void board_add_ram_info(int) __attribute__ ((weak, alias("__board_add_ram_info"))); -int __board_flash_wp_on(void) +static int __board_flash_wp_on(void) { /* * Most flashes can't be detected when write protection is enabled, @@ -184,7 +184,7 @@ int __board_flash_wp_on(void) int board_flash_wp_on(void) __attribute__ ((weak, alias("__board_flash_wp_on"))); -void __cpu_secondary_init_r(void) +static void __cpu_secondary_init_r(void) { } @@ -262,7 +262,7 @@ static int init_func_watchdog_reset(void) * Initialization sequence */ -init_fnc_t *init_sequence[] = { +static init_fnc_t *init_sequence[] = { #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) probecpu, #endif @@ -345,7 +345,7 @@ ulong get_effective_memsize(void) #endif } -int __fixup_cpu(void) +static int __fixup_cpu(void) { return 0; } @@ -402,7 +402,7 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_POST post_bootmode_init(); - post_run(NULL, POST_ROM | post_bootmode_get(0)); + post_run(NULL, POST_ROM | post_bootmode_get(NULL)); #endif WATCHDOG_RESET(); diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 53dc4df3fe..ac5bd6d4f1 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -326,7 +326,7 @@ static int boot_body_linux(bootm_headers_t *images) return 0; } -__attribute__((noinline)) +noinline int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { int ret; diff --git a/arch/powerpc/lib/extable.c b/arch/powerpc/lib/extable.c index 7408d5c969..60983aea4c 100644 --- a/arch/powerpc/lib/extable.c +++ b/arch/powerpc/lib/extable.c @@ -63,8 +63,6 @@ search_one_table(const struct exception_table_entry *first, return 0; } -int ex_tab_message = 1; - unsigned long search_exception_table(unsigned long addr) { @@ -74,8 +72,7 @@ search_exception_table(unsigned long addr) ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr); /* if the serial port does not hang in exception, printf can be used */ #if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION) - if (ex_tab_message) - debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); + debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); #endif if (ret) return ret; diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile deleted file mode 100644 index b49f26da27..0000000000 --- a/board/c2mon/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o pcmcia.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c deleted file mode 100644 index 348dfa0af3..0000000000 --- a/board/c2mon/c2mon.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, - 0x1FF77C47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: TTTech C2MON "); - - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc (buf[i]); - } - - putc ('\n'); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long reg; - long int size8, size9; - long int size = 0; - - upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 2 the SDRAM bank 2 at physical address 0. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, - SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, - SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; - udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type - * For types > 128 MBit leave it at the current (fast) rate - */ - if (size < 0x02000000) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; - udelay (1000); - } - - /* - * Final mapping - */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - /* - * No bank 1 - * - * invalidate bank - */ - memctl->memc_br3 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - - udelay (10000); - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c deleted file mode 100644 index d33cb6ce43..0000000000 --- a/board/c2mon/flash.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -#ifndef CONFIG_ENV_ADDR -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000); - memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - &flash_info[1]); -#endif - } else { - memctl->memc_br1 = 0; /* invalidate bank */ - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c deleted file mode 100644 index 2267829039..0000000000 --- a/board/c2mon/pcmcia.c +++ /dev/null @@ -1,282 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <pcmcia.h> - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -#define PCMCIA_BOARD_MSG "C2MON" - -static void cfg_ports (void) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - ushort sreg; - - immap = (immap_t *)CONFIG_SYS_IMMR; - cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm)); - - /* - * Configure Port C for TPS2211 PC-Card Power-Interface Switch - * - * Switch off all voltages, assert shutdown - */ - sreg = immap->im_ioport.iop_pcdat; - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1); /* VAVPP => Hi-Z */ - sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1); /* 3V and 5V off */ - immap->im_ioport.iop_pcdat = sreg; - - immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS); - immap->im_ioport.iop_pcdir |= TPS2211_OUTPUTS; - - debug ("Set Port C: PAR: %04x DIR: %04x DAT: %04x\n", - immap->im_ioport.iop_pcpar, - immap->im_ioport.iop_pcdir, - immap->im_ioport.iop_pcdat); - - /* - * Configure Port B for TPS2211 PC-Card Power-Interface Switch - * - * Over-Current Input only - */ - cp->cp_pbpar &= ~(TPS2211_INPUTS); - cp->cp_pbdir &= ~(TPS2211_INPUTS); - - debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n", - cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat); -} - -int pcmcia_hardware_enable(int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - volatile sysconf8xx_t *sysp; - uint reg, pipr, mask; - ushort sreg; - int i; - - debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - udelay(10000); - - immap = (immap_t *)CONFIG_SYS_IMMR; - sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm)); - - /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */ - cfg_ports (); - - /* - * Configure SIUMCR to enable PCMCIA port B - * (VFLS[0:1] are not used for debugging, we connect FRZ# instead) - */ - sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */ - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK(_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Make sure there is a card in the slot, then configure the interface. - */ - udelay(10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__,__FUNCTION__, - &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) { - printf (" No Card found\n"); - return (1); - } - - /* - * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z - */ - mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); - pipr = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - pipr, - (reg&PCMCIA_VS1(slot))?"n":"ff", - (reg&PCMCIA_VS2(slot))?"n":"ff"); - - sreg = immap->im_ioport.iop_pcdat; - if ((pipr & mask) == mask) { - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */ - TPS2211_VCCD1); /* 5V on */ - sreg &= ~(TPS2211_VCCD0); /* 3V off */ - puts (" 5.0V card found: "); - } else { - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */ - TPS2211_VCCD0); /* 3V on */ - sreg &= ~(TPS2211_VCCD1); /* 5V off */ - puts (" 3.3V card found: "); - } - - debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n", - sreg, - ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off", - (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) ? "on" : "off" - ); - - immap->im_ioport.iop_pcdat = sreg; - - /* Wait 500 ms; use this to check for over-current */ - for (i=0; i<5000; ++i) { - if ((cp->cp_pbdat & TPS2211_OC) == 0) { - printf (" *** Overcurrent - Safety shutdown ***\n"); - immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1); - return (1); - } - udelay (100); - } - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - udelay(250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return (0); -} - - -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - u_long reg; - - debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - immap = (immap_t *)CONFIG_SYS_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - - /* Configure PCMCIA General Control Register */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - /* ALl voltages off / Hi-Z */ - immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 | - TPS2211_VCCD0 | TPS2211_VCCD1 ); - - udelay(10000); - - return (0); -} -#endif - - -int pcmcia_voltage_set(int slot, int vcc, int vpp) -{ - volatile immap_t *immap; - volatile pcmconf8xx_t *pcmp; - u_long reg; - ushort sreg; - - debug ("voltage_set: " - PCMCIA_BOARD_MSG - " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", - 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); - - immap = (immap_t *)CONFIG_SYS_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - /* - * Disable PCMCIA buffers (isolate the interface) - * and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Configure Port C pins for - * 5 Volts Enable and 3 Volts enable, - * Turn all power pins to Hi-Z - */ - debug ("PCMCIA power OFF\n"); - cfg_ports (); /* Enables switch, but all in Hi-Z */ - - sreg = immap->im_ioport.iop_pcdat; - sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */ - - switch(vcc) { - case 0: break; /* Switch off */ - case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */ - sreg &= ~TPS2211_VCCD1; - break; - case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */ - sreg |= TPS2211_VCCD1; - break; - default: goto done; - } - - /* Checking supported voltages */ - - debug ("PIPR: 0x%x --> %s\n", - pcmp->pcmc_pipr, - (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V"); - - immap->im_ioport.iop_pcdat = sreg; - -#ifdef DEBUG -{ - char *s; - - if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) { - s = "at 3.3V"; - } else if (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) { - s = "at 5.0V"; - } else { - s = "down"; - } - printf ("PCMCIA powered %s\n", s); -} -#endif - -done: - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", - slot+'A'); - return (0); -} - -#endif /* CONFIG_PCMCIA */ diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds deleted file mode 100644 index b854c180c4..0000000000 --- a/board/c2mon/u-boot.lds +++ /dev/null @@ -1,106 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - net/libnet.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug deleted file mode 100644 index 92796e6744..0000000000 --- a/board/c2mon/u-boot.lds.debug +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 69f15000db..fe5cf095fc 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -36,7 +36,6 @@ SECTIONS arch/powerpc/cpu/mpc8xx/traps.o (.text*) net/libnet.o (.text*) board/esteem192e/libesteem192e.o (.text*) - *(.text.*printf) . = env_offset; common/env_embedded.o (.text*) diff --git a/board/etx094/Makefile b/board/etx094/Makefile deleted file mode 100644 index 6dc495c361..0000000000 --- a/board/etx094/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c deleted file mode 100644 index abefe4a482..0000000000 --- a/board/etx094/etx094.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -static void read_hw_vers (void); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - - /* single read (offset 0x00 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04, - 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_, - - /* burst read (offset 0x08 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04, - 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00, - 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* single write (offset 0x18 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00, - 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_, - - /* burst write (offset 0x20 in upm ram) */ - - 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00, - 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05, - - /* init part1 (offset 0x28 in upm ram) */ - - 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34, - 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* refresh (offset 0x30 in upm ram) */ - - 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05, - - /* init part2 (offset 0x34 in upm ram) */ - - 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34, - 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_, - - /* exception (offset 0x3C in upm ram) */ - - 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, - -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test ETX ID string (ETX_xxx...) - * - * Return 1 always. - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: "); - -#ifdef SB_ETX094 - gd->board_type = 0; /* 0 = 2SDRAM-Device */ -#else - gd->board_type = 1; /* 1 = 1SDRAM-Device */ -#endif - - if (l < 0 || strncmp(buf, "ETX_", 4)) { - puts ("### No HW ID - assuming ETX_094\n"); - read_hw_vers (); - return (0); - } - - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc(buf[i]); - } - putc ('\n'); - - read_hw_vers (); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0, size_b1, size8, size9; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */ - - /* A3(SDRAM)=0 => Bursttype = Sequential - * A2-A0(SDRAM)=010 => Burst length = 4 - * A4-A6(SDRAM)=010 => CasLat=2 - */ - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - } - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */ - memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */ - udelay (1); - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */ - memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */ - udelay (1); - } - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; - udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - /* - * Check Bank 1 Memory Size - * use current column settings - * [9 column SDRAM may also be used in 8 column mode, - * but then only half the real size will be used.] - */ - size_b1 = - dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM, - SDRAM_MAX_SIZE); -/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ - } else { - size_b1 = 0; - } - - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type, both banks - * For types > 128 MBit leave it at the current (fast) rate - */ - if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */ - udelay (1000); - } - - /* - * Final mapping: map bigger bank first - */ - if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ - - memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = - (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b0 > 0) { - /* - * Position Bank 0 immediately above Bank 1 - */ - memctl->memc_or2 = - ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = - ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b1; - } else { - unsigned long reg; - - /* - * No bank 0 - * - * invalidate bank - */ - memctl->memc_br2 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - } - - } else { /* SDRAM Bank 0 is bigger - map first */ - - memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = - (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b1 > 0) { - /* - * Position Bank 1 immediately above Bank 0 - */ - memctl->memc_or3 = - ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = - ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b0; - } else { - unsigned long reg; - - /* - * No bank 1 - * - * invalidate bank - */ - memctl->memc_br3 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - } - } - - udelay (10000); - - return (size_b0 + size_b1); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -/* HW-ID Table (Bits: 2^9;2^7;2^5) */ -#define HW_ID_0 0x0000 -#define HW_ID_1 0x0020 -#define HW_ID_2 0x0080 -#define HW_ID_3 0x00a0 -#define HW_ID_4 0x0200 -#define HW_ID_5 0x0220 -#define HW_ID_6 0x0280 -#define HW_ID_7 0x02a0 - -void read_hw_vers () -{ - unsigned short rd_msk = 0x02A0; - - /* HW-ID pin-definition */ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - immr->im_ioport.iop_pddir &= ~(rd_msk); - immr->im_ioport.iop_pdpar &= ~(rd_msk); - - /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */ - - /* Check the HW-ID */ - printf ("HW-Version: "); - switch (immr->im_ioport.iop_pddat & rd_msk) { - case HW_ID_0: - printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n"); - break; - case HW_ID_1: - printf ("V0.9 / W50037-Q1-D6-1\n"); - break; - case HW_ID_2: - printf ("NOT USED - assuming ID#2\n"); - break; - case HW_ID_3: - printf ("NOT USED - assuming ID#3\n"); - break; - case HW_ID_4: - printf ("NOT USED - assuming ID#4\n"); - break; - case HW_ID_5: - printf ("NOT USED - assuming ID#5\n"); - break; - case HW_ID_6: - printf ("NOT USED - assuming ID#6\n"); - break; - case HW_ID_7: - printf ("NOT USED - assuming ID#7\n"); - break; - default: - printf ("###Error###\n"); - break; - } -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/etx094/flash.c b/board/etx094/flash.c deleted file mode 100644 index 0958e73d60..0000000000 --- a/board/etx094/flash.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long *addr, flash_info_t *info); -static int write_word(flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets(ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); -#ifdef CONFIG_FLASH_16BIT - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */ -#else - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - BR_MS_GPCM | BR_V; -#endif - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, - &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - memctl->memc_br1 = 0; /* invalidate bank 1 */ - - flash_info[0].size = size_b0; - - return size_b0; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00002000); - - return; - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ -#ifdef CONFIG_FLASH_16BIT - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000) - 0x00030000; -#else - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00020000) - 0x00060000; -#endif - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) - info->start[i] = base + i * 0x00020000; - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_SST200A: - printf("39xF200A (2M = 128K x 16)\n"); - break; - case FLASH_SST400A: - printf("39xF400A (4M = 256K x 16)\n"); - break; - case FLASH_SST800A: - printf("39xF800A (8M = 512K x 16)\n"); - break; - case FLASH_STM800AB: - printf("M29W800AB (8M = 512K x 16)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ -#ifdef CONFIG_FLASH_16BIT - vu_short *s_addr = (vu_short *)addr; - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x0090; - value = s_addr[0]; - value = value|(value<<16); -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00900090; - value = addr[0]; -#endif - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return 0; /* no or unknown flash */ - } -#ifdef CONFIG_FLASH_16BIT - value = s_addr[1]; - value = value|(value<<16); -#else - value = addr[1]; /* device ID */ -#endif - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; -#ifdef CONFIG_FLASH_16BIT - info->sector_count = 19; - info->size = 0x00100000; /* => 1 MB */ -#else - info->sector_count = 19; - info->size = 0x00200000; /* => 2 MB */ -#endif - break; - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; -#ifdef CONFIG_FLASH_16BIT - info->sector_count = 35; - info->size = 0x00200000; /* => 2 MB */ -#else - info->sector_count = 35; - info->size = 0x00400000; /* => 4 MB */ -#endif - - break; - case SST_ID_xF200A: - info->flash_id += FLASH_SST200A; - info->sector_count = 64; /* 39xF200A (2M = 128K x 16) */ - info->size = 0x00080000; - break; - case SST_ID_xF400A: - info->flash_id += FLASH_SST400A; - info->sector_count = 128; /* 39xF400A (4M = 256K x 16) */ - info->size = 0x00100000; - break; - case SST_ID_xF800A: - info->flash_id += FLASH_SST800A; - info->sector_count = 256; /* 39xF800A (8M = 512K x 16) */ - info->size = 0x00200000; - break; /* => 2 MB */ - case STM_ID_x800AB: - info->flash_id += FLASH_STM800AB; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return 0; /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00002000); - } else { /* AMD and Fujitsu types */ - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ -#ifdef CONFIG_FLASH_16BIT - - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + - (i * 0x00010000) - 0x00030000; -#else - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + - (i * 0x00020000) - 0x00060000; -#endif - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) - info->start[i] = base + i * 0x00020000; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* - * read sector protection at sector address: - * (A7 .. A0) = 0x02 - * D0 = 1 if protected - */ -#ifdef CONFIG_FLASH_16BIT - s_addr = (volatile unsigned short *)(info->start[i]); - info->protect[i] = s_addr[2] & 1; -#else - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; -#endif - } - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { -#ifdef CONFIG_FLASH_16BIT - s_addr = (volatile unsigned short *)(info->start[0]); - *s_addr = 0x00F0; /* reset bank */ -#else - addr = (volatile unsigned long *)info->start[0]; - *addr = 0x00F000F0; /* reset bank */ -#endif - - } - return info->size; -} - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long *)(info->start[0]); - int flag, prot, sect; - ulong start, now, last; -#ifdef CONFIG_FLASH_16BIT - vu_short *s_addr = (vu_short *)addr; -#endif - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } -/*#ifndef CONFIG_FLASH_16BIT - ulong type; - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return; - } -#endif*/ - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - start = get_timer(0); - last = start; - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ -#ifdef CONFIG_FLASH_16BIT - vu_short *s_sect_addr = (vu_short *)(info->start[sect]); -#else - vu_long *sect_addr = (vu_long *)(info->start[sect]); -#endif - /* Disable interrupts which might cause a timeout */ - flag = disable_interrupts(); - -#ifdef CONFIG_FLASH_16BIT - - /*printf("\ns_sect_addr=%x",s_sect_addr);*/ - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x0080; - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_sect_addr[0] = 0x0030; -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00800080; - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - sect_addr[0] = 0x00300030; -#endif - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - -#ifdef CONFIG_FLASH_16BIT - while ((s_sect_addr[0] & 0x0080) != 0x0080) { -#else - while ((sect_addr[0] & 0x00800080) != 0x00800080) { -#endif - now = get_timer(start); - if (now > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show every second that we're waiting */ - if ((now - last) > 1000) { - putc('.'); - last = now; - } - } - } - } - - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; -#ifdef CONFIG_FLASH_16BIT - s_addr[0] = 0x00F0; /* reset bank */ -#else - addr[0] = 0x00F000F0; /* reset bank */ -#endif - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - l = addr - wp; - - if (l != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - rc = write_word(info, wp, data); - - if (rc != 0) - return rc; - - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) - data = (data << 8) | *src++; - - rc = write_word(info, wp, data); - if (rc != 0) - return rc; - - wp += 4; - cnt -= 4; - } - - if (cnt == 0) - return 0; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - return write_word(info, wp, data); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word(flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - -#ifdef CONFIG_FLASH_16BIT - vu_short high_data; - vu_short low_data; - vu_short *s_addr = (vu_short *)addr; -#endif - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) - return 2; - -#ifdef CONFIG_FLASH_16BIT - /* Write the 16 higher-bits */ - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - high_data = ((data>>16) & 0x0000ffff); - - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x00A0; - - *((vu_short *)dest) = high_data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return 1; - } - - /* Write the 16 lower-bits */ -#endif - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); -#ifdef CONFIG_FLASH_16BIT - dest += 0x2; - low_data = (data & 0x0000ffff); - - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x00A0; - *((vu_short *)dest) = low_data; - -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00A000A0; - *((vu_long *)dest) = data; -#endif - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - -#ifdef CONFIG_FLASH_16BIT - while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) { -#else - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { -#endif - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return 1; - } - return 0; -} diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds deleted file mode 100644 index 56c3470bde..0000000000 --- a/board/etx094/u-boot.lds +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - *(.text.vsprintf) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index 276ae3c5cf..3c7502879b 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -237,13 +237,17 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -U_BOOT_CMD( - pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, - "Reset the board using the FPGA sequencer", +#ifdef CONFIG_SYS_LONGHELP +static char pixis_help_text[] = "- hard reset to default bank\n" "pixis_reset altbank - reset to alternate bank\n" #ifdef DEBUG "pixis_reset dump - display the PIXIS registers\n" #endif - "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n" + "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n"; +#endif + +U_BOOT_CMD( + pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, + "Reset the board using the FPGA sequencer", pixis_help_text ); diff --git a/board/freescale/m54418twr/u-boot.lds b/board/freescale/m54418twr/u-boot.lds index f341449346..36a4c264b9 100644 --- a/board/freescale/m54418twr/u-boot.lds +++ b/board/freescale/m54418twr/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 730ec4e734..1071803c79 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -70,22 +70,22 @@ int checkboard(void) #ifndef CONFIG_NAND_SPL static struct pci_region pci_regions[] = { { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + .bus_start = CONFIG_SYS_PCI1_MEM_BASE, + .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, + .size = CONFIG_SYS_PCI1_MEM_SIZE, + .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM + .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, + .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, + .size = CONFIG_SYS_PCI1_MMIO_SIZE, + .flags = PCI_REGION_MEM }, { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO + .bus_start = CONFIG_SYS_PCI1_IO_BASE, + .phys_start = CONFIG_SYS_PCI1_IO_PHYS, + .size = CONFIG_SYS_PCI1_IO_SIZE, + .flags = PCI_REGION_IO } }; diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c index 30676e1e1c..2a172ccdef 100644 --- a/board/freescale/mpc8568mds/bcsr.c +++ b/board/freescale/mpc8568mds/bcsr.c @@ -25,7 +25,7 @@ #include "bcsr.h" -void enable_8568mds_duart() +void enable_8568mds_duart(void) { volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060); volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070); @@ -36,21 +36,21 @@ void enable_8568mds_duart() bcsr[5] |= 0x01; /* Enable Duart in BCSR*/ } -void enable_8568mds_flash_write() +void enable_8568mds_flash_write(void) { volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] |= 0x01; } -void disable_8568mds_flash_write() +void disable_8568mds_flash_write(void) { volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] &= ~(0x01); } -void enable_8568mds_qe_mdio() +void enable_8568mds_qe_mdio(void) { u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c index b688e5cc73..37d0c5f9a9 100644 --- a/board/freescale/mpc8569mds/bcsr.c +++ b/board/freescale/mpc8569mds/bcsr.c @@ -25,17 +25,17 @@ #include "bcsr.h" -void enable_8569mds_flash_write() +void enable_8569mds_flash_write(void) { setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); } -void disable_8569mds_flash_write() +void disable_8569mds_flash_write(void) { clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); } -void enable_8569mds_qe_uec() +void enable_8569mds_qe_uec(void) { #if defined(CONFIG_SYS_UCC_RGMII_MODE) setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), @@ -60,7 +60,7 @@ void enable_8569mds_qe_uec() #endif } -void disable_8569mds_brd_eeprom_write_protect() +void disable_8569mds_brd_eeprom_write_protect(void) { clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT); } diff --git a/board/lantec/Makefile b/board/lantec/Makefile deleted file mode 100644 index 12e4aa6880..0000000000 --- a/board/lantec/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/lantec/flash.c b/board/lantec/flash.c deleted file mode 100644 index 97ed0542bf..0000000000 --- a/board/lantec/flash.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Derived from ../tqm8xx/flash.c - * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG] - */ - -#include <common.h> -#include <mpc8xx.h> - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM); - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0: " - "ID 0x%lx, Size = 0x%08lx = %ld MB\n", - flash_info[0].flash_id, - size_b0, size_b0<<20); - } - - DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM); - - size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]); - - DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - DEBUGF ("## Before remap: " - "BR0: 0x%08x OR0: 0x%08x " - "BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0, - memctl->memc_br1, memctl->memc_or1); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \ - BR_MS_GPCM | BR_PS_32 | BR_V; - - DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size_b0; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000); - memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_PS_32 | BR_V; - - DEBUGF("## BR5: 0x%08x OR5: 0x%08x\n", - memctl->memc_br5, memctl->memc_or5); - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_info[1].size = size_b1; - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[1]); -#endif - } else { - memctl->memc_br5 = 0; /* invalidate bank */ - memctl->memc_or5 = 0; /* invalidate bank */ - - DEBUGF("## DISABLE BR5: 0x%08x OR5: 0x%08x\n", - memctl->memc_br5, memctl->memc_or5); - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - flash_info[1].size = 0; - } - - DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c deleted file mode 100644 index 6d3486c48a..0000000000 --- a/board/lantec/lantec.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2001 - * Torsten Stevens, FHG IMS, stevens@ims.fhg.de - * Bruno Achauer, Exet AG, bruno@exet-ag.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Derived from ../tqm8xx/tqm8xx.c - */ - -#include <common.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, - 0x1ff77c47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, - 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test TQ ID string (TQM8xx...) - * If present, check for "L" type (no second DRAM bank), - * otherwise "L" type is assumed as default. - * - * Return 1 for "L" type, 0 else. - */ - -int checkboard (void) -{ - printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0; - int i; - - /* - * Configure UPMA for SDRAM - */ - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ; - - /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - /* initialize memory address register */ - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */ - - /* mode initialization (offset 5) */ - udelay (200); /* 0x80006105 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); - - /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - - udelay (1); /* 0x80006106 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); - - memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ - - udelay (200); - - /* Need at least 10 DRAM accesses to stabilize */ - for (i = 0; i < 10; ++i) { - volatile unsigned long *addr = - (volatile unsigned long *) SDRAM_BASE3_PRELIM; - unsigned long val; - - val = *(addr + i); - *(addr + i) = val; - } - - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = dram_size (CONFIG_SYS_MAMR_8COL, - (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE; - - /* - * Final mapping: - */ - - memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - udelay (1000); - - return (size_b0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds deleted file mode 100644 index 94118024bd..0000000000 --- a/board/lantec/u-boot.lds +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) - drivers/rtc/librtc.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug deleted file mode 100644 index e788f5c170..0000000000 --- a/board/lantec/u-boot.lds.debug +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c deleted file mode 100644 index 7325a93647..0000000000 --- a/board/siemens/IAD210/IAD210.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2001 - * Paul Geerinckx - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> -#include <net.h> -#include "atm.h" -#include <i2c.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -/* used PLD registers */ -# define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0) -# define PLD_EXT_RES (unsigned char *) (0x10000000 + 10) -# define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11) -# define PLD_EXT_LED (unsigned char *) (0x10000000 + 12) -# define PLD_EXT_X21 (unsigned char *) (0x10000000 + 13) - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */ - _NOT_USED_, - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0xFFFAF834, 0xFFE5B435, /* last */ - _NOT_USED_, - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00, - 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, - 0xF1AAF804, 0xFFA5F447, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84, - 0xFFAFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * MRS sequence (Offset 38 in UPMA RAM) - */ - 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */ - _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0xFFAFFC04, 0xFFAFFC05, /* last */ - _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; - long int size; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ - udelay (1); - - memctl->memc_mcr = 0x80004105; /* SDRAM precharge */ - udelay (1); - memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */ - udelay (1); - memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - */ - size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - - memctl->memc_mamr = CONFIG_SYS_MAMR; - udelay (1000); - - /* - * Final mapping - */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); - - udelay (10000); - - /* prepare pin multiplexing for fast ethernet */ - - atmLoad (); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ - - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - return (0); -} - -void board_serial_init (void) -{ - ; /* nothing to do here */ -} - -void board_ether_init (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; - - atmLoad (); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ -} - -int board_early_init_f (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - - /* configure the LED timing output pins - port A pin 4 */ - iop->iop_papar = 0x0800; - iop->iop_padir = 0x0800; - - /* start timer 2 for the 4hz LED blink rate */ - timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */ - timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */ - timers->cpmt_tgcr = 0x00000810; /* run timer 2 */ - - /* chip select for PLD access */ - memctl->memc_br6 = 0x10000401; - memctl->memc_or6 = 0xFC000908; - - /* PLD initial values ( set LEDs, remove reset on LXT) */ - - *PLD_GCR1_REG = 0x06; - *PLD_EXT_RES = 0xC0; - *PLD_EXT_FETH = 0x40; - *PLD_EXT_LED = 0xFF; - *PLD_EXT_X21 = 0x04; - return 0; -} - -static void board_get_enetaddr(uchar *addr) -{ - int i; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpm = &immap->im_cpm; - unsigned int rccrtmp; - - char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 }; - - for (i = 0; i < 6; i++) - addr[i] = default_mac_addr[i]; - - printf ("There is an error in the i2c driver .. /n"); - printf ("You need to fix it first....../n"); - - rccrtmp = cpm->cp_rccr; - cpm->cp_rccr |= 0x0020; - - i2c_reg_read (0xa0, 0); - printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n", - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0)); - - cpm->cp_rccr = rccrtmp; -} - -int misc_init_r(void) -{ - uchar enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile deleted file mode 100644 index bb81507815..0000000000 --- a/board/siemens/IAD210/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o atm.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c deleted file mode 100644 index 40aad0ac26..0000000000 --- a/board/siemens/IAD210/atm.c +++ /dev/null @@ -1,652 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <commproc.h> - -#include "atm.h" -#include <linux/stddef.h> - -#define SYNC __asm__("sync") -#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1))) - -#define FALSE 1 -#define TRUE 0 -#define OK 0 -#define ERROR -1 - -struct atm_connection_t g_conn[NUM_CONNECTIONS] = -{ - { NULL, 10, NULL, 10, NULL, NULL, NULL, NULL }, /* OAM */ -}; - -struct atm_driver_t g_atm = -{ - FALSE, /* loaded */ - FALSE, /* started */ - NULL, /* csram */ - 0, /* csram_size */ - NULL, /* am_top */ - NULL, /* ap_top */ - NULL, /* int_reload_ptr */ - NULL, /* int_serv_ptr */ - NULL, /* rbd_base_ptr */ - NULL, /* tbd_base_ptr */ - 0 /* linerate */ -}; - -char csram[1024]; /* more than enough for doing nothing*/ - -int atmLoad(void); -void atmUnload(void); -int atmMemInit(void); -void atmIntInit(void); -void atmApcInit(void); -void atmAmtInit(void); -void atmCpmInit(void); -void atmUtpInit(void); - -/***************************************************************************** - * - * FUNCTION NAME: atmLoad - * - * DESCRIPTION: Basic ATM initialization. - * - * PARAMETERS: none - * - * RETURNS: OK or ERROR - * - ****************************************************************************/ -int atmLoad() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile iop8xx_t *iop = &immap->im_ioport; - - timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */ - immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */ - iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */ - - if ( atmMemInit() != OK ) return ERROR; - - atmIntInit(); - atmApcInit(); - atmAmtInit(); - atmCpmInit(); - atmUtpInit(); - - g_atm.loaded = TRUE; - - return OK; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmUnload - * - * DESCRIPTION: Disables ATM and UTOPIA. - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmUnload() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile iop8xx_t *iop = &immap->im_ioport; - - timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */ - immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */ - iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */ - g_atm.loaded = FALSE; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmMemInit - * - * DESCRIPTION: - * - * The ATM driver uses the following resources: - * - * A. Memory in DPRAM to hold - * - * 1/ CT = Connection Table ( RCT & TCT ) - * 2/ TCTE = Transmit Connection Table Extension - * 3/ MPHYPT = Multi-PHY Pointing Table - * 4/ APCP = APC Parameter Table - * 5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 ) - * 6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR ) - * 7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR ) - * 8/ TQ = Transmit Queue - * 9/ AM = Address Matching Table - * 10/ AP = Address Pointing Table - * - * B. Memory in cache safe RAM to hold - * - * 1/ INT = Interrupt Queue - * 2/ RBD = Receive Buffer Descriptors - * 3/ TBD = Transmit Buffer Descriptors - * - * This function - * 1. clears the ATM DPRAM area, - * 2. Allocates and clears cache safe memory, - * 3. Initializes 'g_conn'. - * - * PARAMETERS: none - * - * RETURNS: OK or ERROR - * - ****************************************************************************/ -int atmMemInit() -{ - int i; - unsigned immr = CONFIG_SYS_IMMR; - int total_num_rbd = 0; - int total_num_tbd = 0; - - memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE); - - g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY; - - for ( i = 0; i < NUM_CONNECTIONS; ++i ) { - total_num_rbd += g_conn[i].num_rbd; - total_num_tbd += g_conn[i].num_tbd; - } - - g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4; - - g_atm.csram = &csram[0]; - memset(&(g_atm.csram), 0x00, g_atm.csram_size); - - g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4); - g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES); - g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd); - - g_conn[0].rbd_ptr = g_atm.rbd_base_ptr; - g_conn[0].tbd_ptr = g_atm.tbd_base_ptr; - g_conn[0].ct_ptr = CT_PTR(immr); - g_conn[0].tcte_ptr = TCTE_PTR(immr); - - return OK; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmIntInit - * - * DESCRIPTION: - * - * Initialization of the MPC860 ESAR Interrupt Queue. - * This function - * - clears all entries in the INT, - * - sets the WRAP bit of the last INT entry, - * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure - * to the first INT entry. - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARKS: - * - * - The INT resides in external cache safe memory. - * - The base address of the INT is stored in g_atm.int_reload_ptr. - * - The number of entries in the INT is given by NUM_INT_ENTRIES. - * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit(). - * - ****************************************************************************/ -void atmIntInit() -{ - int i; - for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0; - g_atm.int_reload_ptr[i] = INT_WRAP; - g_atm.int_serv_ptr = g_atm.int_reload_ptr; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmApcInit - * - * DESCRIPTION: - * - * This function initializes the following ATM Pace Controller related - * data structures: - * - * - 1 MPHY Pointing Table (contains only one entry) - * - 3 APC Parameter Tables (one PHY with 3 priorities) - * - 3 APC Tables (one table for each priority) - * - 1 Transmit Queue (one transmit queue per PHY) - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmApcInit() -{ - int i; - /* unsigned immr = CONFIG_SYS_IMMR; */ - uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR); - struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR); - uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR); - uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR); - /***************************************************/ - /* Initialize MPHY Pointing Table (only one entry) */ - /***************************************************/ - *mphypt_ptr = APCP_BASE; - - /********************************************/ - /* Initialize APC parameters for priority 1 */ - /********************************************/ - apcp_ptr->apct_base1 = APCT_PRIO_1_BASE; - apcp_ptr->apct_end1 = APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2; - apcp_ptr->apct_ptr1 = APCT_PRIO_1_BASE; - apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE; - apcp_ptr->etqbase = TQ_BASE; - apcp_ptr->etqend = TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2; - apcp_ptr->etqaptr = TQ_BASE; - apcp_ptr->etqtptr = TQ_BASE; - apcp_ptr->apc_mi = 8; - apcp_ptr->ncits = 0x0100; /* NCITS = 1 */ - apcp_ptr->apcnt = 0; - apcp_ptr->reserved1 = 0; - apcp_ptr->eapcst = 0x2009; /* LAST, ESAR, MPHY */ - apcp_ptr->ptp_counter = 0; - apcp_ptr->ptp_txch = 0; - apcp_ptr->reserved2 = 0; - - - /***************************************************/ - /* Initialize APC Tables with empty slots (0xFFFF) */ - /***************************************************/ - for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF; - - /************************/ - /* Clear Transmit Queue */ - /************************/ - for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmAmtInit - * - * DESCRIPTION: - * - * This function clears the first entry in the Address Matching Table and - * lets the first entry in the Address Pointing table point to the first - * entry in the TCT table (i.e. the raw cell channel). - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARKS: - * - * The values for the AMBASE, AMEND and APBASE registers in SAR parameter - * RAM are initialized by atmCpmInit(). - * - ****************************************************************************/ -void atmAmtInit() -{ - unsigned immr = CONFIG_SYS_IMMR; - - g_atm.am_top = AM_PTR(immr); - g_atm.ap_top = AP_PTR(immr); - - *(g_atm.ap_top--) = CT_BASE; - *(g_atm.am_top--) = 0; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmCpmInit - * - * DESCRIPTION: - * - * This function initializes the Utopia Interface Parameter RAM Map - * (SCC4, ATM Protocol) of the Communication Processor Modudule. - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmCpmInit() -{ - unsigned immr = CONFIG_SYS_IMMR; - - memset((char *)immr + 0x3F00, 0x00, 0xC0); - - /*-----------------------------------------------------------------*/ - /* RBDBASE - Receive buffer descriptors base address */ - /* The RBDs reside in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr; - - /*-----------------------------------------------------------------*/ - /* SRFCR - SAR receive function code */ - /* 0-2 rsvd = 000 */ - /* 3-4 BO = 11 Byte ordering (big endian). */ - /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */ - /* when the SDMA channel accesses memory. */ - /*-----------------------------------------------------------------*/ - *SRFCR(immr) = 0x18; - - /*-----------------------------------------------------------------*/ - /* SRSTATE - SAR receive status */ - /* 0 EXT = 0 Extended mode off. */ - /* 1 ACP = 0 Valid only if EXT = 1. */ - /* 2 EC = 0 Standard 53-byte ATM cell. */ - /* 3 SNC = 0 In sync. Must be set to 0 during initialization. */ - /* 4 ESAR = 1 Enhanced SAR functionality enabled. */ - /* 5 MCF = 1 Management Cell Filter active. */ - /* 6 SER = 0 UTOPIA mode. */ - /* 7 MPY = 1 Multiple PHY mode. */ - /*-----------------------------------------------------------------*/ - *SRSTATE(immr) = 0x0D; - - /*-----------------------------------------------------------------*/ - /* MRBLR - Maximum receive buffer length register. */ - /* Must be cleared for ATM operation (see also SMRBLR). */ - /*-----------------------------------------------------------------*/ - *MRBLR(immr) = 0; - - /*-----------------------------------------------------------------*/ - /* RSTATE - SCC internal receive state parameters */ - /* The first byte must be initialized with the value of SRFCR. */ - /*-----------------------------------------------------------------*/ - *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24; - - /*-----------------------------------------------------------------*/ - /* STFCR - SAR transmit function code */ - /* 0-2 rsvd = 000 */ - /* 3-4 BO = 11 Byte ordering (big endian). */ - /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */ - /* when the SDMA channel accesses memory. */ - /*-----------------------------------------------------------------*/ - *STFCR(immr) = 0x18; - - /*-----------------------------------------------------------------*/ - /* SRSTATE - SAR transmit status */ - /* 0 EXT = 0 : Extended mode off */ - /* 1 rsvd = 0 : */ - /* 2 EC = 0 : Standard 53-byte ATM cell */ - /* 3 rsvd = 0 : */ - /* 4 ESAR = 1 : Enhanced SAR functionality enabled */ - /* 5 rsvd = 0 : */ - /* 6 SER = 0 : UTOPIA mode */ - /* 7 MPY = 1 : Multiple PHY mode */ - /*-----------------------------------------------------------------*/ - *STSTATE(immr) = 0x09; - - /*-----------------------------------------------------------------*/ - /* TBDBASE - Transmit buffer descriptors base address */ - /* The TBDs reside in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr; - - /*-----------------------------------------------------------------*/ - /* TSTATE - SCC internal transmit state parameters */ - /* The first byte must be initialized with the value of STFCR. */ - /*-----------------------------------------------------------------*/ - *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24; - - /*-----------------------------------------------------------------*/ - /* CTBASE - Connection table base address */ - /* Offset from the beginning of DPRAM (64-byte aligned). */ - /*-----------------------------------------------------------------*/ - *CTBASE(immr) = CT_BASE; - - /*-----------------------------------------------------------------*/ - /* INTBASE - Interrupt queue base pointer. */ - /* The interrupt queue resides in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *INTBASE(immr) = (uint32)g_atm.int_reload_ptr; - - /*-----------------------------------------------------------------*/ - /* INTPTR - Pointer into interrupt queue. */ - /* Initialize to INTBASE. */ - /*-----------------------------------------------------------------*/ - *INTPTR(immr) = *INTBASE(immr); - - /*-----------------------------------------------------------------*/ - /* C_MASK - Constant mask for CRC32 */ - /* Must be initialized to 0xDEBB20E3. */ - /*-----------------------------------------------------------------*/ - *C_MASK(immr) = 0xDEBB20E3; - - /*-----------------------------------------------------------------*/ - /* INT_ICNT - Interrupt threshold value */ - /*-----------------------------------------------------------------*/ - *INT_ICNT(immr) = 1; - - /*-----------------------------------------------------------------*/ - /* INT_CNT - Interrupt counter */ - /* Initalize to INT_ICNT. Decremented for each interrupt entry */ - /* reported in the interrupt queue. On zero an interrupt is */ - /* signaled to the host by setting the GINT bit in the event */ - /* register. The counter is reinitialized with INT_ICNT. */ - /*-----------------------------------------------------------------*/ - *INT_CNT(immr) = *INT_ICNT(immr); - - /*-----------------------------------------------------------------*/ - /* SMRBLR - SAR maximum receive buffer length register. */ - /* Must be a multiple of 48 bytes. Common for all ATM connections. */ - /*-----------------------------------------------------------------*/ - *SMRBLR(immr) = SAR_RXB_SIZE; - - /*-----------------------------------------------------------------*/ - /* APCST - APC status register. */ - /* 0 rsvd 0 */ - /* 1-2 CSER 11 Initialize with the same value as NSER. */ - /* 3-4 NSER 11 Next serial or UTOPIA channel. */ - /* 5-7 rsvd 000 */ - /* 8-10 rsvd 000 */ - /* 11 rsvd 0 */ - /* 12 ESAR 1 UTOPIA Level 2 MPHY enabled. */ - /* 13 DIS 0 APC disable. Must be initiazed to 0. */ - /* 14 PL2 0 Not used. */ - /* 15 MPY 1 Multiple PHY mode on. */ - /*-----------------------------------------------------------------*/ - *APCST(immr) = 0x7809; - - /*-----------------------------------------------------------------*/ - /* APCPTR - Pointer to the APC parameter table */ - /* In MPHY master mode this parameter points to the MPHY pointing */ - /* table. 2-byte aligned. */ - /*-----------------------------------------------------------------*/ - *APCPTR(immr) = MPHYPT_BASE; - - /*-----------------------------------------------------------------*/ - /* HMASK - Header mask */ - /* Each incoming cell is masked with HMASK before being compared */ - /* to the entries in the address matching table. */ - /*-----------------------------------------------------------------*/ - *HMASK(immr) = AM_HMASK; - - /*-----------------------------------------------------------------*/ - /* AMBASE - Address matching table base address */ - /*-----------------------------------------------------------------*/ - *AMBASE(immr) = AM_BASE; - - /*-----------------------------------------------------------------*/ - /* AMEND - Address matching table end address */ - /*-----------------------------------------------------------------*/ - *AMEND(immr) = AM_BASE; - - /*-----------------------------------------------------------------*/ - /* APBASE - Address pointing table base address */ - /*-----------------------------------------------------------------*/ - *APBASE(immr) = AP_BASE; - - /*-----------------------------------------------------------------*/ - /* MPHYST - MPHY status register */ - /* 0-1 rsvd 00 */ - /* 2-6 NMPHY 00000 1 PHY */ - /* 7-9 rsvd 000 */ - /* 10-14 CMPHY 00000 Initialize with same value as NMPHY */ - /*-----------------------------------------------------------------*/ - *MPHYST(immr) = 0x0000; - - /*-----------------------------------------------------------------*/ - /* TCTEBASE - Transmit connection table extension base address */ - /* Offset from the beginning of DPRAM (32-byte aligned). */ - /*-----------------------------------------------------------------*/ - *TCTEBASE(immr) = TCTE_BASE; - - /*-----------------------------------------------------------------*/ - /* Clear not used registers. */ - /*-----------------------------------------------------------------*/ -} - -/***************************************************************************** - * - * FUNCTION NAME: atmUtpInit - * - * DESCRIPTION: - * - * This function initializes the ATM interface for - * - * - UTOPIA mode - * - muxed bus - * - master operation - * - multi PHY (because of a bug in the MPC860P rev. E.0) - * - internal clock = SYSCLK / 2 - * - * EXTERNAL EFFECTS: - * - * After calling this function, the MPC860ESAR UTOPIA bus is - * active and uses the following ports/pins: - * - * Port Pin Signal Description - * ------ --- ------- ------------------------------------------- - * PB[15] R17 TxClav Transmit cell available input/output signal - * PC[15] D16 RxClav Receive cell available input/output signal - * PD[15] U17 UTPB[0] UTOPIA bus bit 0 input/output signal - * PD[14] V19 UTPB[1] UTOPIA bus bit 1 input/output signal - * PD[13] V18 UTPB[2] UTOPIA bus bit 2 input/output signal - * PD[12] R16 UTPB[3] UTOPIA bus bit 3 input/output signal - * PD[11] T16 RXENB Receive enable input/output signal - * PD[10] W18 TXENB Transmit enable input/output signal - * PD[9] V17 UTPCLK UTOPIA clock input/output signal - * PD[7] T15 UTPB[4] UTOPIA bus bit 4 input/output signal - * PD[6] V16 UTPB[5] UTOPIA bus bit 5 input/output signal - * PD[5] U15 UTPB[6] UTOPIA bus bit 6 input/output signal - * PD[4] U16 UTPB[7] UTOPIA bus bit 7 input/output signal - * PD[3] W16 SOC Start of cell input/output signal - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARK: - * - * The ATM parameters and data structures must be configured before - * initializing the UTOPIA port. The UTOPIA port activates immediately - * upon initialization, and if its associated data structures are not - * initialized, the CPM will lock up. - * - ****************************************************************************/ -void atmUtpInit() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile car8xx_t *car = &immap->im_clkrst; - volatile cpm8xx_t *cpm = &immap->im_cpm; - int flag; - - flag = disable_interrupts(); - - /*-----------------------------------------------------------------*/ - /* SCCR - System Clock Control Register */ - /* */ - /* The UTOPIA clock can be selected to be internal clock or */ - /* external clock (selected by the UTOPIA mode register). */ - /* In case of internal clock, the UTOPIA clock is derived from */ - /* the system frequency divided by two dividers. */ - /* Bits 27-31 of the SCCR register are defined to control the */ - /* UTOPIA clock. */ - /* */ - /* SCCR[27:29] DFUTP Division factor. Divide the system clock */ - /* by 2^DFUTP. */ - /* SCCR[30:31] DFAUTP Additional division factor. Divide the */ - /* system clock by the following value: */ - /* 00 = divide by 1 */ - /* 00 = divide by 3 */ - /* 10 = divide by 5 */ - /* 11 = divide by 7 */ - /* */ - /* Note that the UTOPIA clock must be programmed as to operate */ - /* within the range SYSCLK/10 .. 50MHz. */ - /*-----------------------------------------------------------------*/ - car->car_sccr &= 0xFFFFFFE0; - car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */ - - /*-----------------------------------------------------------------*/ - /* RCCR - RISC Controller Configuration Register */ - /* */ - /* RCCR[8] DR1M IDMA Request 0 Mode */ - /* 0 = edge sensitive */ - /* 1 = level sensitive */ - /* RCCR[9] DR0M IDMA Request 0 Mode */ - /* 0 = edge sensitive */ - /* 1 = level sensitive */ - /* RCCR[10:11] DRQP IDMA Request Priority */ - /* 00 = IDMA req. have more prio. than SCCs */ - /* 01 = IDMA req. have less prio. then SCCs */ - /* 10 = IDMA requests have the lowest prio. */ - /* 11 = reserved */ - /* */ - /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */ - /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */ - /* higher priority. */ - /*-----------------------------------------------------------------*/ - cpm->cp_rccr &= 0xFF0F; - cpm->cp_rccr |= 0x00D0; - - /*-----------------------------------------------------------------*/ - /* Port B - TxClav Signal */ - /*-----------------------------------------------------------------*/ - cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */ - cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */ - - /*-----------------------------------------------------------------*/ - /* UTOPIA Mode Register */ - /* */ - /* - muxed bus (master operation only) */ - /* - multi PHY (because of a bug in the MPC860P rev.E.0) */ - /* - internal clock */ - /* - no loopback */ - /* - do no activate statistical counters */ - /*-----------------------------------------------------------------*/ - iop->utmode = 0x00000004; SYNC; - - /*-----------------------------------------------------------------*/ - /* Port D - UTOPIA Data and Control Signals */ - /* */ - /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals */ - /* 11 RXENB UTOPIA receive enable input/output signal */ - /* 10 TXENB UTOPIA transmit enable input/output signal */ - /* 9 TUPCLK UTOPIA clock input/output signal */ - /* 8 MII-MDC Used by MII in simult. MII and UTOPIA operation */ - /* 7-4 UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals */ - /* 3 SOC UTOPIA Start of cell input/output signal */ - /* 2 Reserved */ - /* 1 Enable UTOPIA mode */ - /* 0 Enable SAR */ - /*-----------------------------------------------------------------*/ - iop->iop_pdpar |= 0xDF7F; SYNC; - iop->iop_pddir &= 0x2080; SYNC; - - /*-----------------------------------------------------------------*/ - /* Port C - RxClav Signal */ - /*-----------------------------------------------------------------*/ - iop->iop_pcpar |= 0x0001; /* PCPAR[15] = 1 */ - iop->iop_pcdir &= 0xFFFE; /* PCDIR[15] = 0 */ - iop->iop_pcso &= 0xFFFE; /* PCSO[15] = 0 */ - - if (flag) - enable_interrupts(); -} diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h deleted file mode 100644 index cd5b45e869..0000000000 --- a/board/siemens/IAD210/atm.h +++ /dev/null @@ -1,287 +0,0 @@ -typedef unsigned char uint8; -typedef unsigned short uint16; -typedef unsigned int uint32; -typedef volatile unsigned char vuint8; -typedef volatile unsigned short vuint16; -typedef volatile unsigned int vuint32; - - -#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000 - -#define ATM_DPRAM_BEGIN (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000) -#define NUM_CONNECTIONS 1 -#define SAR_RXB_SIZE 1584 -#define AM_HMASK 0x0FFFFFF0 - -#define NUM_CT_ENTRIES (NUM_CONNECTIONS) -#define NUM_TCTE_ENTRIES (NUM_CONNECTIONS) -#define NUM_AM_ENTRIES (NUM_CONNECTIONS+1) -#define NUM_AP_ENTRIES (NUM_CONNECTIONS+1) -#define NUM_MPHYPT_ENTRIES 1 -#define NUM_APCP_ENTRIES 1 -#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */ -#define NUM_TQ_ENTRIES 12 - -#define SIZE_OF_CT_ENTRY 64 -#define SIZE_OF_TCTE_ENTRY 32 -#define SIZE_OF_AM_ENTRY 4 -#define SIZE_OF_AP_ENTRY 2 -#define SIZE_OF_MPHYPT_ENTRY 2 -#define SIZE_OF_APCP_ENTRY 32 -#define SIZE_OF_APCT_ENTRY 2 -#define SIZE_OF_TQ_ENTRY 2 - -#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64 */ -#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32 */ -#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32 */ -#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4 */ -#define AM_BASE (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY) -#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2 */ -#define AP_BASE (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY) -#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2 */ -#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2 */ -#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2 */ -#define ATM_DPRAM_SIZE ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN) - -#define CT_PTR(base) ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE)) -#define TCTE_PTR(base) ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE)) -#define AM_PTR(base) ((uint32 *)((char *)(base) + 0x2000 + AM_BASE)) -#define AP_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + AP_BASE)) -#define MPHYPT_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE)) -#define APCP_PTR(base) ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE)) -#define APCT1_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE)) -#define APCT2_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE)) -#define APCT3_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE)) -#define TQ_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE)) - -/* SAR registers */ -#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */ -#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */ -#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */ -#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */ -#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */ -#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */ -#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */ -#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */ -#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */ -#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */ -#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */ -#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */ -#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */ -#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */ -#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */ -#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */ -#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */ -#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */ -#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */ -#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */ -#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */ -#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */ -#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */ -#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */ -#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */ -#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */ -#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */ -#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */ -#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */ -#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */ -#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */ -#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */ -#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */ -#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */ -#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */ -#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */ -#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */ -#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */ -#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */ -#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */ -#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */ -#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */ -#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */ -#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */ -#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */ - -/* ESAR registers */ -#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */ -#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */ -#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */ -#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */ -#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */ -#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */ -#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */ -#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */ -#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */ - -/* UTOPIA Mode Register */ -#define UTMODE(base) (CAST(vuint32 *)(base + 0x0978)) - -/* SAR commands */ -#define TRANSMIT_CHANNEL_ACTIVATE_CMD 0x0FC1 -#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1 -#define STOP_TRANSMIT_CMD 0x2FC1 -#define RESTART_TRANSMIT_CMD 0x3FC1 -#define STOP_RECEIVE_CMD 0x4FC1 -#define RESTART_RECEIVE_CMD 0x5FC1 -#define APC_BYPASS_CMD 0x6FC1 -#define MEM_WRITE_CMD 0x7FC1 -#define CPCR_FLG 0x0001 - -/* INT flags */ -#define INT_VALID 0x80000000 -#define INT_WRAP 0x40000000 -#define INT_APCO 0x00800000 -#define INT_TQF 0x00200000 -#define INT_RXF 0x00080000 -#define INT_BSY 0x00040000 -#define INT_TXB 0x00020000 -#define INT_RXB 0x00010000 - -#define NUM_INT_ENTRIES 80 -#define SIZE_OF_INT_ENTRY 4 - -struct apc_params_t { - vuint16 apct_base1; /* APC Table - First Priority Base pointer */ - vuint16 apct_end1; /* First APC Table - Length */ - vuint16 apct_ptr1; /* First APC Table Pointer */ - vuint16 apct_sptr1; /* APC Table First Priority Service pointer */ - vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */ - vuint16 etqend; /* Enhanced Transmit Queue End pointer */ - vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */ - vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */ - vuint16 apc_mi; /* APC - Max Iteration */ - vuint16 ncits; /* Number of Cells In TimeSlot */ - vuint16 apcnt; /* APC - N Timer */ - vuint16 reserved1; /* reserved */ - vuint16 eapcst; /* APC status */ - vuint16 ptp_counter; /* PTP queue length */ - vuint16 ptp_txch; /* PTP channel */ - vuint16 reserved2; /* reserved */ -}; - -struct ct_entry_t { - /* RCT */ - unsigned fhnt:1; - unsigned pm_rct:1; - unsigned reserved0:6; - unsigned hec:1; - unsigned clp:1; - unsigned cng_ncrc:1; - unsigned inf_rct:1; - unsigned cngi_ptp:1; - unsigned cdis_rct:1; - unsigned aal_rct:2; - uint16 rbalen; - uint32 rcrc; - uint32 rb_ptr; - uint16 rtmlen; - uint16 rbd_ptr; - uint16 rbase; - uint16 tstamp; - uint16 imask; - unsigned ft:2; - unsigned nim:1; - unsigned reserved1:2; - unsigned rpmt:6; - unsigned reserved2:5; - uint8 reserved3[8]; - /* TCT */ - unsigned reserved4:1; - unsigned pm_tct:1; - unsigned reserved5:6; - unsigned pc:1; - unsigned reserved6:2; - unsigned inf_tct:1; - unsigned cr10:1; - unsigned cdis_tct:1; - unsigned aal_tct:2; - uint16 tbalen; - uint32 tcrc; - uint32 tb_ptr; - uint16 ttmlen; - uint16 tbd_ptr; - uint16 tbase; - unsigned reserved7:5; - unsigned tpmt:6; - unsigned reserved8:3; - unsigned avcf:1; - unsigned act:1; - uint32 chead; - uint16 apcl; - uint16 apcpr; - unsigned out:1; - unsigned bnr:1; - unsigned tservice:2; - unsigned apcp:12; - uint16 apcpf; -}; - -struct tcte_entry_t { - unsigned res1:4; - unsigned scr:12; - uint16 scrf; - uint16 bt; - uint16 buptrh; - uint32 buptrl; - unsigned vbr2:1; - unsigned res2:15; - uint16 oobr; - uint16 res3[8]; -}; - -#define SIZE_OF_RBD 12 -#define SIZE_OF_TBD 12 - -struct atm_bd_t { - vuint16 flags; - vuint16 length; - unsigned char *buffer_ptr; - vuint16 cpcs_uu_cpi; - vuint16 reserved; -}; - -/* BD flags */ -#define EMPTY 0x8000 -#define READY 0x8000 -#define WRAP 0x2000 -#define INTERRUPT 0x1000 -#define LAST 0x0800 -#define FIRST 0x0400 -#define OAM 0x0400 -#define CONTINUOUS 0x0200 -#define HEC_ERROR 0x0080 -#define CELL_LOSS 0x0040 -#define CONGESTION 0x0020 -#define ABORT 0x0010 -#define LEN_ERROR 0x0002 -#define CRC_ERROR 0x0001 - -struct atm_connection_t { - struct atm_bd_t *rbd_ptr; - int num_rbd; - struct atm_bd_t *tbd_ptr; - int num_tbd; - struct ct_entry_t *ct_ptr; - struct tcte_entry_t *tcte_ptr; - void *drv; - void (*notify) (void *drv, int event); -}; - -struct atm_driver_t { - int loaded; - int started; - char *csram; - int csram_size; - uint32 *am_top; - uint16 *ap_top; - uint32 *int_reload_ptr; - uint32 *int_serv_ptr; - struct atm_bd_t *rbd_base_ptr; - struct atm_bd_t *tbd_base_ptr; - unsigned linerate_in_bps; -}; - -extern struct atm_connection_t g_conn[NUM_CONNECTIONS]; -extern struct atm_driver_t g_atm; - -extern int atmLoad (void); -extern void atmUnload (void); diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c deleted file mode 100644 index c262e0f836..0000000000 --- a/board/siemens/IAD210/flash.c +++ /dev/null @@ -1,502 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size<<20); - } - - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds deleted file mode 100644 index c0f107319e..0000000000 --- a/board/siemens/IAD210/u-boot.lds +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - net/libnet.o (.text*) - drivers/rtc/librtc.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile deleted file mode 100644 index 07db9d44e5..0000000000 --- a/board/siemens/SCM/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx) -endif - -LIB = $(obj)lib$(BOARD).o - -COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \ - ../../tqc/tqm8xx/load_sernum_ethaddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c deleted file mode 100644 index 4a6d5382be..0000000000 --- a/board/siemens/SCM/flash.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Flash Routines for AMD devices on the TQM8260 board - * - *-------------------------------------------------------------------- - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -#define V_ULONG(a) (*(volatile unsigned long *)( a )) -#define V_BYTE(a) (*(volatile unsigned char *)( a )) - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ -void flash_reset (void) -{ - if (flash_info[0].flash_id != FLASH_UNKNOWN) { - V_ULONG (flash_info[0].start[0]) = 0x00F000F0; - V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0; - } -} - -/*----------------------------------------------------------------------- - */ -ulong flash_get_size (ulong baseaddr, flash_info_t * info) -{ - short i; - unsigned long flashtest_h, flashtest_l; - - /* Write auto select command sequence and test FLASH answer */ - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090; - - flashtest_h = V_ULONG (baseaddr); /* manufacturer ID */ - flashtest_l = V_ULONG (baseaddr + 4); - - switch ((int) flashtest_h) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - flashtest_h = V_ULONG (baseaddr + 8); /* device ID */ - flashtest_l = V_ULONG (baseaddr + 12); - if (flashtest_h != flashtest_l) { - info->flash_id = FLASH_UNKNOWN; - } else { - switch (flashtest_h) { - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_DL322T: - info->flash_id += FLASH_AMDL322T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL322B: - info->flash_id += FLASH_AMDL322B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323T: - info->flash_id += FLASH_AMDL323T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323B: - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_LV640U: - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x02000000; - break; /* 4 * 8 MB = 32 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* no or unknown flash */ - } - } - - if (flashtest_h == AMD_ID_LV640U) { - - /* set up sector start adress table (uniform sector type) */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = baseaddr + (i * 0x00040000); - - } else if (info->flash_id & FLASH_BTYPE) { - - /* set up sector start adress table (bottom sector type) */ - info->start[0] = baseaddr + 0x00000000; - info->start[1] = baseaddr + 0x00010000; - info->start[2] = baseaddr + 0x00018000; - info->start[3] = baseaddr + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000; - } - - } else { - - /* set up sector start adress table (top sector type) */ - i = info->sector_count - 1; - info->start[i--] = baseaddr + info->size - 0x00010000; - info->start[i--] = baseaddr + info->size - 0x00018000; - info->start[i--] = baseaddr + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = baseaddr + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - if ((V_ULONG (info->start[i] + 16) & 0x00010001) || - (V_ULONG (info->start[i] + 20) & 0x00010001)) { - info->protect[i] = 1; /* D0 = 1 if protected */ - } else { - info->protect[i] = 0; - } - } - - flash_reset (); - return (info->size); -} - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size_b0 = 0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here (only one bank) */ - - size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]); - if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 >> 20); - } - - /* - * protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); -#endif - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - case FLASH_MAN_FUJ: - printf ("FUJITSU "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM800T: - printf ("29LV800T (8 M, top sector)\n"); - break; - case FLASH_AM800B: - printf ("29LV800T (8 M, bottom sector)\n"); - break; - case FLASH_AM160T: - printf ("29LV160T (16 M, top sector)\n"); - break; - case FLASH_AM160B: - printf ("29LV160B (16 M, bottom sector)\n"); - break; - case FLASH_AMDL322T: - printf ("29DL322T (32 M, top sector)\n"); - break; - case FLASH_AMDL322B: - printf ("29DL322B (32 M, bottom sector)\n"); - break; - case FLASH_AMDL323T: - printf ("29DL323T (32 M, top sector)\n"); - break; - case FLASH_AMDL323B: - printf ("29DL323B (32 M, bottom sector)\n"); - break; - case FLASH_AM640U: - printf ("29LV640D (64 M, uniform sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - udelay (1000); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - V_ULONG (info->start[sect]) = 0x00300030; - V_ULONG (info->start[sect] + 4) = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 || - (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080) - { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - flash_reset (); - - printf (" done\n"); - return 0; -} - -static int write_dword (flash_info_t *, ulong, unsigned char *); - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong dp; - static unsigned char bb[8]; - int i, l, rc, cc = cnt; - - dp = (addr & ~7); /* get lower dword aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - dp) != 0) { - for (i = 0; i < 8; i++) - bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++; - if ((rc = write_dword (info, dp, bb)) != 0) { - return (rc); - } - dp += 8; - cc -= 8 - l; - } - - /* - * handle word aligned part - */ - while (cc >= 8) { - if ((rc = write_dword (info, dp, src)) != 0) { - return (rc); - } - dp += 8; - src += 8; - cc -= 8; - } - - if (cc <= 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - for (i = 0; i < 8; i++) { - bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i); - } - return (write_dword (info, dp, bb)); -} - -/*----------------------------------------------------------------------- - * Write a dword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) -{ - ulong start, cl, ch; - int flag, i; - - for (ch = 0, i = 0; i < 4; i++) - ch = (ch << 8) + *pdata++; /* high word */ - for (cl = 0, i = 0; i < 4; i++) - cl = (cl << 8) + *pdata++; /* low word */ - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *) dest) & ch) != ch - || (*((vu_long *) (dest + 4)) & cl) != cl) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest) = ch; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest + 4) = cl; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) || - ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c deleted file mode 100644 index acd9c1570f..0000000000 --- a/board/siemens/SCM/fpga_scm.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <mpc8260.h> -#include <common.h> -#include "../common/fpga.h" - -fpga_t fpga_list[] = { - {"FIOX", CONFIG_SYS_FIOX_BASE, - CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE} - , - {"FDOHM", CONFIG_SYS_FDOHM_BASE, - CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE} -}; -int fpga_count = sizeof (fpga_list) / sizeof (fpga_t); - - -ulong fpga_control (fpga_t * fpga, int cmd) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - switch (cmd) { - case FPGA_INIT_IS_HIGH: - immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */ - return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0; - - case FPGA_INIT_SET_LOW: - immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */ - immr->im_ioport.iop_pdatd &= ~fpga->init_mask; - break; - - case FPGA_INIT_SET_HIGH: - immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */ - immr->im_ioport.iop_pdatd |= fpga->init_mask; - break; - - case FPGA_PROG_SET_LOW: - immr->im_ioport.iop_pdatd &= ~fpga->prog_mask; - break; - - case FPGA_PROG_SET_HIGH: - immr->im_ioport.iop_pdatd |= fpga->prog_mask; - break; - - case FPGA_DONE_IS_HIGH: - return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0; - - case FPGA_READ_MODE: - break; - - case FPGA_LOAD_MODE: - break; - - case FPGA_GET_ID: - if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) { - ulong ver = - *(volatile ulong *) (fpga->conf_base + 0x10); - return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0); - } else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) { - return (*(volatile ushort *) fpga->conf_base) & 0xff; - } else { - return *(volatile ulong *) fpga->conf_base; - } - - case FPGA_INIT_PORTS: - immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */ - immr->im_ioport.iop_psord &= ~fpga->init_mask; - immr->im_ioport.iop_pdird &= ~fpga->init_mask; - - immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */ - immr->im_ioport.iop_psord &= ~fpga->prog_mask; - immr->im_ioport.iop_pdird |= fpga->prog_mask; - - immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */ - immr->im_ioport.iop_psord &= ~fpga->done_mask; - immr->im_ioport.iop_pdird &= ~fpga->done_mask; - - break; - - } - return 0; -} diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c deleted file mode 100644 index 461b56e3ff..0000000000 --- a/board/siemens/SCM/scm.c +++ /dev/null @@ -1,541 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <ioports.h> -#include <mpc8260.h> -#include <linux/compiler.h> - -#include "scm.h" - -DECLARE_GLOBAL_DATA_PTR; - -static void config_scoh_cs(void); -extern int fpga_init(void); - -#if 0 -#define DEBUGF(fmt,args...) printf (fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 1, 0, 0 }, - /* PA24 */ { 0, 0, 0, 1, 0, 0 }, - /* PA23 */ { 0, 0, 0, 1, 0, 0 }, - /* PA22 */ { 0, 0, 0, 1, 0, 0 }, - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1]*/ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 1, 0, 0 }, - /* PA12 */ { 0, 0, 0, 1, 0, 0 }, - /* PA11 */ { 0, 0, 0, 1, 0, 0 }, - /* PA10 */ { 0, 0, 0, 1, 0, 0 }, - /* PA9 */ { 1, 1, 1, 1, 0, 0 }, /* TDM_A1 L1TXD0 */ - /* PA8 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RXD0 */ - /* PA7 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1TSYNC */ - /* PA6 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RSYNC */ - /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* FIOX_FPGA_PR */ - /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* DOHM_FPGA_PR */ - /* PA3 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK4 */ - /* PA2 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK4 */ - /* PA1 */ { 0, 0, 0, 1, 0, 0 }, - /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* BUSY */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MIN */ - /* PB30 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MAJ */ - /* PB29 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MIN */ - /* PB28 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MAJ */ - /* PB27 */ { 0, 1, 0, 0, 0, 0 }, - /* PB26 */ { 0, 1, 0, 0, 0, 0 }, - /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* LED_GREEN_L */ - /* PB24 */ { 1, 0, 0, 1, 0, 0 }, /* LED_RED_L */ - /* PB23 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TXD */ - /* PB22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RXD */ - /* PB21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TSYNC */ - /* PB20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RSYNC */ - /* PB19 */ { 1, 0, 0, 0, 0, 0 }, /* UID */ - /* PB18 */ { 0, 1, 0, 0, 0, 0 }, - /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ - /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ - /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ - /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ - /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ - /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ - /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */ - /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */ - /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */ - /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */ - /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */ - /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */ - /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */ - /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK1 */ - /* PC30 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK1 */ - /* PC29 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK3 */ - /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK3 */ - /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK2 */ - /* PC26 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK2 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, - /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ - /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ - /* PC19 */ { 0, 1, 0, 0, 0, 0 }, - /* PC18 */ { 0, 1, 0, 0, 0, 0 }, - /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */ - /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */ - /* PC15 */ { 0, 0, 0, 1, 0, 0 }, - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* RES_PHY_L */ - /* PC12 */ { 0, 0, 0, 1, 0, 0 }, - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, - /* PC9 */ { 0, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TSYNC */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* FEP_RDY */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* UC4_ALARM_L */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* UC3_ALARM_L */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* UC2_ALARM_L */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* RES_MISC_L */ - /* PC2 */ { 0, 0, 0, 1, 0, 0 }, /* RES_OH_L */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* RES_DOHM_L */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* RES_FIOX_L */ - }, - - /* Port D configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_F */ - /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_F */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_D */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_D */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, - /* PD22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TXD */ - /* PD21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RXD */ - /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */ - /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPISEL */ - /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPICLK */ - /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSI */ - /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSO */ -#if defined(CONFIG_SOFT_I2C) - /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ - /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ -#else -#if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#else /* normal I/O port pins */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#endif -#endif - /* PD13 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TXD */ - /* PD12 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RXD */ - /* PD11 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TSYNC */ - /* PD10 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RSYNC */ - /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, - /* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_F */ - /* PD4 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_D */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* Check Board Identity: - */ -int checkboard (void) -{ - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - - puts ("Board: "); - - if (!i || strncmp (str, "TQM8260", 7)) { - puts ("### No HW ID - assuming TQM8260\n"); - return (0); - } - - puts (str); - putc ('\n'); - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) -{ - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; - ulong maxsize, size; - int i; - - /* We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff)) / 2; - - /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that - * we are configuring CS1 if base != 0 - */ - sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr; - orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1; - - *orx_ptr = orx; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ - - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; - - size = get_ram_size((long *)base, maxsize); - - *orx_ptr = orx | ~(size - 1); - - return (size); -} - -/* - * Test Power-On-Reset. - */ -int power_on_reset (void) -{ - /* Test Reset Status Register */ - return gd->reset_status & RSR_CSRS ? 0 : 1; -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - -#ifndef CONFIG_SYS_RAMBOOT - long size8, size9; -#endif - long psize, lsize; - - psize = 16 * 1024 * 1024; - lsize = 0; - - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - -#if 0 /* Just for debugging */ -#define prt_br_or(brX,orX) do { \ - ulong start = memctl->memc_ ## brX & 0xFFFF8000; \ - ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \ - printf ("\n" \ - #brX " 0x%08x " #orX " 0x%08x " \ - "==> 0x%08lx ... 0x%08lx = %ld MB\n", \ - memctl->memc_ ## brX, memctl->memc_ ## orX, \ - start, start+sizem, (sizem+1)>>20); \ - } while (0) - prt_br_or (br0, or0); - prt_br_or (br1, or1); - prt_br_or (br2, or2); - prt_br_or (br3, or3); -#endif - -#ifndef CONFIG_SYS_RAMBOOT - /* 60x SDRAM setup: - */ - size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - if (size8 < size9) { - psize = size9; - printf ("(60x:9COL - %ld MB, ", psize >> 20); - } else { - psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - printf ("(60x:8COL - %ld MB, ", psize >> 20); - } - - /* Local SDRAM setup: - */ -#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM - memctl->memc_lsrt = CONFIG_SYS_LSRT; - size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) SDRAM_BASE2_PRELIM); - size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL, - (uchar *) SDRAM_BASE2_PRELIM); - - if (size8 < size9) { - lsize = size9; - printf ("Local:9COL - %ld MB) using ", lsize >> 20); - } else { - lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) SDRAM_BASE2_PRELIM); - printf ("Local:8COL - %ld MB) using ", lsize >> 20); - } - -#if 0 - /* Set up BR2 so that the local SDRAM goes - * right after the 60x SDRAM - */ - memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) | - (CONFIG_SYS_SDRAM_BASE + psize); -#endif -#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */ -#endif /* CONFIG_SYS_RAMBOOT */ - - icache_enable (); - - config_scoh_cs (); - - return (psize); -} - -/* ------------------------------------------------------------------------- */ - -static void config_scoh_cs (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immr->im_memctl; - volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE; - __maybe_unused volatile uint tmp, i; - - /* Initialize OR3 / BR3 for CAN Bus Controller 0 */ - memctl->memc_or3 = CONFIG_SYS_CAN0_OR3; - memctl->memc_br3 = CONFIG_SYS_CAN0_BR3; - /* Initialize OR4 / BR4 for CAN Bus Controller 1 */ - memctl->memc_or4 = CONFIG_SYS_CAN1_OR4; - memctl->memc_br4 = CONFIG_SYS_CAN1_BR4; - - /* Initialize MAMR to write in the array at address 0x0 */ - memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS; - - /* Initialize UPMA for CAN: single read */ - memctl->memc_mdr = 0xcffeec00; - udelay (1); /* Necessary to have the data correct in the UPM array!!!! */ - /* The read on the CAN controller write the data of mdr in UPMA array. */ - /* The index to the array will be incremented automatically - through this read */ - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcfc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcfc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0xfffdec07; - udelay (1); - tmp = can->cpu_interface; - - - /* Initialize MAMR to write in the array at address 0x18 */ - memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS; - - /* Initialize UPMA for CAN: single write */ - memctl->memc_mdr = 0xfcffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00fffc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00fffc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x30ffec07; - udelay (1); - tmp = can->cpu_interface; - - /* Initialize MAMR */ - memctl->memc_mamr = MxMR_GPL_x4DIS; /* GPL_B4 ouput line Disable */ - - - /* Initialize OR5 / BR5 for the extended EEPROM Bank0 */ - memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5; - memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5; - /* Initialize OR6 / BR6 for the extended EEPROM Bank1 */ - memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6; - memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6; - - /* Initialize OR7 / BR7 for the Glue Logic */ - memctl->memc_or7 = CONFIG_SYS_FIOX_OR7; - memctl->memc_br7 = CONFIG_SYS_FIOX_BR7; - - /* Initialize OR8 / BR8 for the DOH Logic */ - memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8; - memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8; - - DEBUGF ("OR0 %08x BR0 %08x\n", memctl->memc_or0, memctl->memc_br0); - DEBUGF ("OR1 %08x BR1 %08x\n", memctl->memc_or1, memctl->memc_br1); - DEBUGF ("OR2 %08x BR2 %08x\n", memctl->memc_or2, memctl->memc_br2); - DEBUGF ("OR3 %08x BR3 %08x\n", memctl->memc_or3, memctl->memc_br3); - DEBUGF ("OR4 %08x BR4 %08x\n", memctl->memc_or4, memctl->memc_br4); - DEBUGF ("OR5 %08x BR5 %08x\n", memctl->memc_or5, memctl->memc_br5); - DEBUGF ("OR6 %08x BR6 %08x\n", memctl->memc_or6, memctl->memc_br6); - DEBUGF ("OR7 %08x BR7 %08x\n", memctl->memc_or7, memctl->memc_br7); - DEBUGF ("OR8 %08x BR8 %08x\n", memctl->memc_or8, memctl->memc_br8); - - DEBUGF ("UPMA addr 0x0\n"); - memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS; - for (i = 0; i < 0x8; i++) { - tmp = can->cpu_interface; - udelay (1); - DEBUGF (" %08x ", memctl->memc_mdr); - } - DEBUGF ("\nUPMA addr 0x18\n"); - memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS; - for (i = 0; i < 0x8; i++) { - tmp = can->cpu_interface; - udelay (1); - DEBUGF (" %08x ", memctl->memc_mdr); - } - DEBUGF ("\n"); - memctl->memc_mamr = MxMR_GPL_x4DIS; -} - -/* ------------------------------------------------------------------------- */ - -int misc_init_r (void) -{ - fpga_init (); - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h deleted file mode 100644 index cb5e03e581..0000000000 --- a/board/siemens/SCM/scm.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __SCM_H -#define __SCM_H - -/*----------------*/ -/* CAN Structures */ -/*----------------*/ - -/* Message */ -struct can_msg { - uchar ctrl_0; - uchar ctrl_1; - uchar arbit_0; - uchar arbit_1; - uchar arbit_2; - uchar arbit_3; - uchar config; - uchar data[8]; -} __attribute__ ((packed)); - -typedef struct can_msg can_msg_t; - -/* CAN Register */ -typedef struct can_reg { - uchar ctrl; - uchar status; - uchar cpu_interface; - uchar resv0; - ushort high_speed_rd; - ushort gbl_mask_std; - uint gbl_mask_extd; - uint msg15_mask; - can_msg_t msg1; - uchar clkout; - can_msg_t msg2; - uchar bus_config; - can_msg_t msg3; - uchar bit_timing_0; - can_msg_t msg4; - uchar bit_timing_1; - can_msg_t msg5; - uchar interrupt; - can_msg_t msg6; - uchar resv1; - can_msg_t msg7; - uchar resv2; - can_msg_t msg8; - uchar resv3; - can_msg_t msg9; - uchar p1conf; - can_msg_t msg10; - uchar p2conf; - can_msg_t msg11; - uchar p1in; - can_msg_t msg12; - uchar p2in; - can_msg_t msg13; - uchar p1out; - can_msg_t msg14; - uchar p2out; - can_msg_t msg15; - uchar ser_res_addr; - uchar resv_cs[0x8000-0x100]; /* 0x8000 is the min size for CS */ -} can_reg_t; - - -#endif /* __SCM_H */ diff --git a/board/siemens/common/README b/board/siemens/common/README deleted file mode 100644 index 7f1c8cd62d..0000000000 --- a/board/siemens/common/README +++ /dev/null @@ -1,27 +0,0 @@ -CCM/SCM-Ergaenzungen fuer U-Boot und Linux: -------------------------------------------- - -Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs: - - => help fpga - fpga fpga status [name] - print FPGA status - fpga reset [name] - reset FPGA - fpga load [name] addr - load FPGA configuration data - -Der Name kann beim CCM-Module auch weggelassen werden. -Die Laengenangabe und damit "puma_len" ist nicht mehr -noetig: - - => fpga load puma 40600000 - FPGA load PUMA: addr 40600000: (00000005)... done - -Die MTD-Partitionierung kann nun mittels "bootargs" ueber- -geben werden: - - => printenv addmtd - addmtd=setenv bootargs ${bootargs} - mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2) - -Die Portierung auf SMC ist natuerlich noch nicht getestet. - -Wolfgang Grandegger (04.06.2002) diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c deleted file mode 100644 index ef8bfde7f1..0000000000 --- a/board/siemens/common/fpga.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <command.h> -#include <linux/ctype.h> -#include <common.h> - -#include "fpga.h" - -int power_on_reset(void); - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - - -static int fpga_get_version(fpga_t* fpga, char* name) -{ - char vname[12]; - /* - * Net-list string format: - * "vvvvvvvvddddddddn...". - * Version Date Name - * "0000000322042002PUMA" = PUMA version 3 from 22.04.2002. - */ - if (strlen(name) < (16 + strlen(fpga->name))) - goto failure; - /* Check FPGA name */ - if (strcmp(&name[16], fpga->name) != 0) - goto failure; - /* Get version number */ - memcpy(vname, name, 8); - vname[8] = '\0'; - return simple_strtoul(vname, NULL, 16); - - failure: - printf("Image name %s is invalid\n", name); - return -1; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -static fpga_t* fpga_get(char* fpga_name) -{ - char name[FPGA_NAME_LEN]; - int i; - - if (strlen(fpga_name) >= FPGA_NAME_LEN) - goto failure; - for (i = 0; i < strlen(fpga_name); i++) - name[i] = toupper(fpga_name[i]); - name[i] = '\0'; - for (i = 0; i < fpga_count; i++) { - if (strcmp(name, fpga_list[i].name) == 0) - return &fpga_list[i]; - } - failure: - printf("FPGA: name %s is invalid\n", fpga_name); - return NULL; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -static void fpga_status (fpga_t* fpga) -{ - /* Check state */ - if (fpga_control(fpga, FPGA_DONE_IS_HIGH)) - printf ("%s is loaded (%08lx)\n", - fpga->name, fpga_control(fpga, FPGA_GET_ID)); - else - printf ("%s is NOT loaded\n", fpga->name); -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */ - -static int fpga_reset (fpga_t* fpga) -{ - int i; - - /* Set PROG to low and wait til INIT goes low */ - fpga_control(fpga, FPGA_PROG_SET_LOW); - for (i = 0; i < FPGA_RESET_TIMEOUT; i++) { - udelay (100); - if (!fpga_control(fpga, FPGA_INIT_IS_HIGH)) - break; - } - if (i == FPGA_RESET_TIMEOUT) - goto failure; - - /* Set PROG to high and wait til INIT goes high */ - fpga_control(fpga, FPGA_PROG_SET_HIGH); - for (i = 0; i < FPGA_RESET_TIMEOUT; i++) { - udelay (100); - if (fpga_control(fpga, FPGA_INIT_IS_HIGH)) - break; - } - if (i == FPGA_RESET_TIMEOUT) - goto failure; - - return 0; - failure: - return 1; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */ - -static int fpga_load (fpga_t* fpga, ulong addr, int checkall) -{ - volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base; - image_header_t *hdr = (image_header_t *)addr; - ulong len; - uchar *data; - char msg[32]; - int verify, i; - -#if defined(CONFIG_FIT) - if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { - puts ("Non legacy image format not supported\n"); - return -1; - } -#endif - - /* - * Check the image header and data of the net-list - */ - if (!image_check_magic (hdr)) { - strcpy (msg, "Bad Image Magic Number"); - goto failure; - } - - if (!image_check_hcrc (hdr)) { - strcpy (msg, "Bad Image Header CRC"); - goto failure; - } - - data = (uchar*)image_get_data (hdr); - len = image_get_data_size (hdr); - - verify = getenv_yesno ("verify"); - if (verify) { - if (!image_check_dcrc (hdr)) { - strcpy (msg, "Bad Image Data CRC"); - goto failure; - } - } - - if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0) - return 1; - - /* align length */ - if (len & 1) - ++len; - - /* - * Reset FPGA and wait for completion - */ - if (fpga_reset(fpga)) { - strcpy (msg, "Reset Timeout"); - goto failure; - } - - printf ("(%s)... ", image_get_name (hdr)); - /* - * Copy data to FPGA - */ - fpga_control (fpga, FPGA_LOAD_MODE); - while (len--) { - *fpga_addr = *data++; - } - fpga_control (fpga, FPGA_READ_MODE); - - /* - * Wait for completion and check error status if timeout - */ - for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) { - udelay (100); - if (fpga_control (fpga, FPGA_DONE_IS_HIGH)) - break; - } - if (i == FPGA_LOAD_TIMEOUT) { - if (fpga_control(fpga, FPGA_INIT_IS_HIGH)) - strcpy(msg, "Invalid Size"); - else - strcpy(msg, "CRC Error"); - goto failure; - } - - printf("done\n"); - return 0; - - failure: - - printf("ERROR: %s\n", msg); - return 1; -} - -#if defined(CONFIG_CMD_BSP) - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr = 0; - int i; - fpga_t* fpga; - - if (argc < 2) - goto failure; - - if (strncmp(argv[1], "stat", 4) == 0) { /* status */ - if (argc == 2) { - for (i = 0; i < fpga_count; i++) { - fpga_status (&fpga_list[i]); - } - } - else if (argc == 3) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - fpga_status (fpga); - } - else - goto failure; - } - else if (strcmp(argv[1],"load") == 0) { /* load */ - if (argc == 3 && fpga_count == 1) { - fpga = &fpga_list[0]; - } - else if (argc == 4) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - } - else - goto failure; - - addr = simple_strtoul(argv[argc-1], NULL, 16); - - printf ("FPGA load %s: addr %08lx: ", - fpga->name, addr); - fpga_load (fpga, addr, 1); - - } - else if (strncmp(argv[1], "rese", 4) == 0) { /* reset */ - if (argc == 2 && fpga_count == 1) { - fpga = &fpga_list[0]; - } - else if (argc == 3) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - } - else - goto failure; - - printf ("FPGA reset %s: ", fpga->name); - if (fpga_reset(fpga)) - printf ("ERROR: Timeout\n"); - else - printf ("done\n"); - } - else - goto failure; - - return 0; - - failure: - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - fpga, 4, 1, do_fpga, - "access FPGA(s)", - "fpga status [name] - print FPGA status\n" - "fpga reset [name] - reset FPGA\n" - "fpga load [name] addr - load FPGA configuration data" -); - -#endif - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -int fpga_init (void) -{ - ulong addr; - ulong new_id, old_id = 0; - image_header_t *hdr; - fpga_t* fpga; - int do_load, i, j; - char name[16], *s; - - /* - * Port setup for FPGA control - */ - for (i = 0; i < fpga_count; i++) { - fpga_control(&fpga_list[i], FPGA_INIT_PORTS); - } - - /* - * Load FPGA(s): a new net-list is loaded if the FPGA is - * empty, Power-on-Reset or the old one is not up-to-date - */ - for (i = 0; i < fpga_count; i++) { - fpga = &fpga_list[i]; - printf ("%s: ", fpga->name); - - for (j = 0; j < strlen(fpga->name); j++) - name[j] = tolower(fpga->name[j]); - name[j] = '\0'; - sprintf(name, "%s_addr", name); - addr = 0; - if ((s = getenv(name)) != NULL) - addr = simple_strtoul(s, NULL, 16); - - if (!addr) { - printf ("env. variable %s undefined\n", name); - return 1; - } - - hdr = (image_header_t *)addr; -#if defined(CONFIG_FIT) - if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { - puts ("Non legacy image format not supported\n"); - return -1; - } -#endif - - if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1) - return 1; - - do_load = 1; - - if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) { - old_id = fpga_control(fpga, FPGA_GET_ID); - if (new_id == old_id) - do_load = 0; - } - - if (do_load) { - printf ("loading "); - fpga_load (fpga, addr, 0); - } else { - printf ("loaded (%08lx)\n", old_id); - } - } - - return 0; -} diff --git a/board/siemens/common/fpga.h b/board/siemens/common/fpga.h deleted file mode 100644 index 2de25b0146..0000000000 --- a/board/siemens/common/fpga.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#ifndef _FPGA_H_ -#define _FPGA_H_ - -#define FPGA_INIT_IS_HIGH 0 -#define FPGA_INIT_SET_HIGH 1 -#define FPGA_INIT_SET_LOW 2 -#define FPGA_PROG_SET_HIGH 3 -#define FPGA_PROG_SET_LOW 4 -#define FPGA_DONE_IS_HIGH 5 -#define FPGA_READ_MODE 6 -#define FPGA_LOAD_MODE 7 -#define FPGA_GET_ID 8 -#define FPGA_INIT_PORTS 9 - -#define FPGA_NAME_LEN 8 -typedef struct { - char name[FPGA_NAME_LEN]; - ulong conf_base; - uint init_mask; - uint prog_mask; - uint done_mask; -} fpga_t; - -extern fpga_t fpga_list[]; -extern int fpga_count; - -ulong fpga_control (fpga_t* fpga, int cmd); - -#endif /* _FPGA_H_ */ diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index e5ad76e9a0..b56a801a4d 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -321,6 +321,26 @@ int board_init(void) return 0; } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + char safe_string[HDR_NAME_LEN + 1]; + + /* Now set variables based on the header. */ + strncpy(safe_string, (char *)header.name, sizeof(header.name)); + safe_string[sizeof(header.name)] = 0; + setenv("board_name", safe_string); + + strncpy(safe_string, (char *)header.version, sizeof(header.version)); + safe_string[sizeof(header.version)] = 0; + setenv("board_rev", safe_string); +#endif + + return 0; +} +#endif + #ifdef CONFIG_DRIVER_TI_CPSW static void cpsw_control(int enabled) { diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index 7cc41cd521..e1e1ccd482 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2012 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -41,8 +41,6 @@ SECTIONS drivers/net/libnet.o (.text*) drivers/pcmcia/libpcmcia.o (.text.pcmcia_on) drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable) - drivers/rtc/librtc.o (.text*) - drivers/misc/libmisc.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.ppcenv*) diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile deleted file mode 100644 index 12e4aa6880..0000000000 --- a/board/westel/amx860/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/westel/amx860/amx860.c b/board/westel/amx860/amx860.c deleted file mode 100644 index 91dcc0dcb3..0000000000 --- a/board/westel/amx860/amx860.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint edo_60ns[] = -{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04, - 0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_, - 0x8fffec24, 0x0ffbec04, 0x08f3ec04, 0x07f3ec08, - 0x08f3ec04, 0x07f3ec48, 0x08f3ec04, 0x07f3ec48, - 0x08f3ec04, 0x07f3ec48, 0x1ff7ec47, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c, - 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c, - 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06, - 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ }; - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: AMX860\n"); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */ - - upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint)); - -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_mptpr = 0x0400; /* divide by 16 */ -#else - memctl->memc_mptpr = 0x0200; -#endif - - memctl->memc_mamr = 0x30a21114; - memctl->memc_or2 = 0xffc00800; -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_br2 = 0x81; - - return (4 << 20); -#else - memctl->memc_or1 = 0xff000800; - memctl->memc_br1 = 0x00000081; - memctl->memc_br2 = 0x01000081; - - return (20 << 20); -#endif -} diff --git a/board/westel/amx860/flash.c b/board/westel/amx860/flash.c deleted file mode 100644 index fe8bce412b..0000000000 --- a/board/westel/amx860/flash.c +++ /dev/null @@ -1,637 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM); - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - -#if defined(FLASH_BASE1_PRELIM) && (FLASH_BASE1_PRELIM != 0) - DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM); - - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } -#else - size_b1 = 0; -#endif /* FLASH_BASE1_PRELIM */ - - DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - DEBUGF ("## Before remap: " - "BR0: 0x%08x OR0: 0x%08x " - "BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0, - memctl->memc_br1, memctl->memc_or1); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size_b0; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK); - memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_V; - - DEBUGF("## BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_info[1].size = size_b1; - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -# endif - -# ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[1]); -#endif - } else { -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_br1 = 0; /* invalidate bank */ - memctl->memc_or1 = 0; /* invalidate bank */ -#endif - - DEBUGF("## DISABLE BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - flash_info[1].size = 0; - } - - DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - /* set sector offsets for uniform sector type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00040000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - DEBUGF("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value); - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - DEBUGF("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value); - - switch (value) { - case AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds deleted file mode 100644 index 9b69d3d1e6..0000000000 --- a/board/westel/amx860/u-boot.lds +++ /dev/null @@ -1,107 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - board/westel/amx860/libamx860.o (.text*) - *(.text.*printf) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug deleted file mode 100644 index 3e075a85bd..0000000000 --- a/board/westel/amx860/u-boot.lds.debug +++ /dev/null @@ -1,138 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 25c53d40d2..4dd989383c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -633,7 +633,6 @@ PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freesca VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz mgcoge powerpc mpc8260 km82xx keymile - km82xx:MGCOGE mgcoge3ne powerpc mpc8260 km82xx keymile - km82xx:MGCOGE3NE -SCM powerpc mpc8260 - siemens TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x @@ -869,11 +868,8 @@ Adder87x powerpc mpc8xx adder - AdderII powerpc mpc8xx adder - - Adder:MPC852T AdderUSB powerpc mpc8xx adder - - Adder ADS860 powerpc mpc8xx fads -c2mon powerpc mpc8xx cogent_mpc8xx powerpc mpc8xx cogent -EP88x powerpc mpc8xx ep88x ESTEEM192E powerpc mpc8xx esteem192e -ETX094 powerpc mpc8xx etx094 FADS823 powerpc mpc8xx fads FADS850SAR powerpc mpc8xx fads FADS860T powerpc mpc8xx fads @@ -891,7 +887,6 @@ IVML24_256 powerpc mpc8xx ivm - IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M -LANTEC powerpc mpc8xx lantec lwmon powerpc mpc8xx MBX powerpc mpc8xx mbx8xx MBX860T powerpc mpc8xx mbx8xx @@ -938,7 +933,6 @@ KUP4K powerpc mpc8xx kup4k kup KUP4X powerpc mpc8xx kup4x kup ELPT860 powerpc mpc8xx elpt860 LEOX uc100 powerpc mpc8xx - manroland -IAD210 powerpc mpc8xx - siemens QS823 powerpc mpc8xx qs850 snmc QS850 powerpc mpc8xx qs850 snmc QS860T powerpc mpc8xx qs860t snmc @@ -964,7 +958,6 @@ TQM885D powerpc mpc8xx tqm8xx tqc TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01 virtlab2 powerpc mpc8xx tqm8xx tqc wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U -AMX860 powerpc mpc8xx amx860 westel csb272 powerpc ppc4xx csb472 powerpc ppc4xx G2000 powerpc ppc4xx g2000 diff --git a/common/Makefile b/common/Makefile index eac63605ce..9e43322211 100644 --- a/common/Makefile +++ b/common/Makefile @@ -90,11 +90,6 @@ COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o -ifdef CONFIG_CMD_EXT4 -COBJS-y += cmd_ext_common.o -else -COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o -endif COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o @@ -104,6 +99,7 @@ COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif +COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o diff --git a/common/cmd_boot.c b/common/cmd_boot.c index a799b338a4..d3836fdfd8 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -32,12 +32,13 @@ /* Allow ports to override the default behavior */ __attribute__((weak)) -unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[]) +unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, + char * const argv[]) { return entry (argc, argv); } -int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, rc; int rcode = 0; diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 83fa5d7bd8..d256ddfaa6 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -161,7 +161,7 @@ static boot_os_fn *boot_os[] = { bootm_headers_t images; /* pointers to os/initrd/fdt images */ /* Allow for arch specific config before we boot */ -void __arch_preboot_os(void) +static void __arch_preboot_os(void) { /* please define platform specific arch_preboot_os() */ } @@ -474,7 +474,7 @@ static cmd_tbl_t cmd_bootm_sub[] = { U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""), }; -int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, +static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int ret = 0; @@ -1013,9 +1013,8 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, return (void *)img_addr; } -U_BOOT_CMD( - bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, - "boot application image from memory", +#ifdef CONFIG_SYS_LONGHELP +static char bootm_help_text[] = "[addr [arg ...]]\n - boot application image stored in memory\n" "\tpassing arguments 'arg ...'; when booting a Linux kernel,\n" "\t'arg' can be the address of an initrd image\n" @@ -1048,7 +1047,12 @@ U_BOOT_CMD( "\tcmdline - OS specific command line processing/setup\n" "\tbdt - OS specific bd_t processing\n" "\tprep - OS specific prep before relocation or go\n" - "\tgo - start OS" + "\tgo - start OS"; +#endif + +U_BOOT_CMD( + bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, + "boot application image from memory", bootm_help_text ); /*******************************************************************/ @@ -1084,7 +1088,7 @@ U_BOOT_CMD( /* iminfo - print header info for a requested image */ /*******************************************************************/ #if defined(CONFIG_CMD_IMI) -int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int arg; ulong addr; @@ -1171,7 +1175,7 @@ U_BOOT_CMD( /* imls - list all images found in flash */ /*******************************************************************/ #if defined(CONFIG_CMD_IMLS) -int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { flash_info_t *info; int i, j; @@ -1643,9 +1647,8 @@ static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } -U_BOOT_CMD( - bootz, CONFIG_SYS_MAXARGS, 1, do_bootz, - "boot Linux zImage image from memory", +#ifdef CONFIG_SYS_LONGHELP +static char bootz_help_text[] = "[addr [initrd[:size]] [fdt]]\n" " - boot Linux zImage stored in memory\n" "\tThe argument 'initrd' is optional and specifies the address\n" @@ -1658,5 +1661,11 @@ U_BOOT_CMD( "\tuse a '-' for the second argument. If you do not pass a third\n" "\ta bd_info struct will be passed instead\n" #endif + ""; +#endif + +U_BOOT_CMD( + bootz, CONFIG_SYS_MAXARGS, 1, do_bootz, + "boot Linux zImage image from memory", bootz_help_text ); #endif /* CONFIG_CMD_BOOTZ */ diff --git a/common/cmd_console.c b/common/cmd_console.c index d8cad6b917..e8d9f11bde 100644 --- a/common/cmd_console.c +++ b/common/cmd_console.c @@ -29,7 +29,7 @@ #include <stdio_dev.h> extern void _do_coninfo (void); -int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char * const argv[]) +static int do_coninfo(cmd_tbl_t *cmd, int flag, int argc, char * const argv[]) { int l; struct list_head *list = stdio_get_list(); diff --git a/common/cmd_date.c b/common/cmd_date.c index 335bc05f2a..0ac032cf30 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -43,7 +43,7 @@ static const char * const weekdays[] = { int mk_date (const char *, struct rtc_time *); -int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct rtc_time tm; int rcode = 0; diff --git a/common/cmd_echo.c b/common/cmd_echo.c index 1e499fb0db..52123fee2a 100644 --- a/common/cmd_echo.c +++ b/common/cmd_echo.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i; int putnl = 1; diff --git a/common/cmd_exit.c b/common/cmd_exit.c index f3fc8f5e79..0f2ee4046f 100644 --- a/common/cmd_exit.c +++ b/common/cmd_exit.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int r; diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index c27d9c7ede..f25e22b0a8 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -37,15 +37,11 @@ /* * Ext2fs support */ -#include <common.h> -#include <ext_common.h> +#include <fs.h> int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (do_ext_ls(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT); } /****************************************************************************** @@ -53,10 +49,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) */ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (do_ext_load(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); } U_BOOT_CMD( @@ -71,5 +64,6 @@ U_BOOT_CMD( "load binary file from a Ext2 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext2 filesystem" + " to address 'addr' from ext2 filesystem.\n" + " All numeric parameters are assumed to be hex." ); diff --git a/common/cmd_ext4.c b/common/cmd_ext4.c index ca4656184c..dcf76a50cd 100644 --- a/common/cmd_ext4.c +++ b/common/cmd_ext4.c @@ -47,10 +47,10 @@ #include <image.h> #include <linux/ctype.h> #include <asm/byteorder.h> -#include <ext_common.h> #include <ext4fs.h> #include <linux/stat.h> #include <malloc.h> +#include <fs.h> #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) #include <usb.h> @@ -59,18 +59,12 @@ int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - if (do_ext_load(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); } int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - if (do_ext_ls(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT); } #if defined(CONFIG_CMD_EXT4_WRITE) @@ -107,7 +101,7 @@ int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc, /* mount the filesystem */ if (!ext4fs_mount(info.size)) { - printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part); + printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part); goto fail; } @@ -129,17 +123,18 @@ fail: U_BOOT_CMD(ext4write, 6, 1, do_ext4_write, "create a file in the root directory", "<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n" - " - create a file in / directory"); + " - create a file in / directory"); #endif U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls, "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'"); + " - list files from 'dev' on 'interface' in a 'directory'"); U_BOOT_CMD(ext4load, 6, 0, do_ext4_load, "load binary file from a Ext4 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" - " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext4 filesystem"); + " - load binary file 'filename' from 'dev' on 'interface'\n" + " to address 'addr' from ext4 filesystem.\n" + " All numeric parameters are assumed to be hex."); diff --git a/common/cmd_ext_common.c b/common/cmd_ext_common.c deleted file mode 100644 index 1952f4d1e1..0000000000 --- a/common/cmd_ext_common.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * (C) Copyright 2011 - 2012 Samsung Electronics - * EXT2/4 filesystem implementation in Uboot by - * Uma Shankar <uma.shankar@samsung.com> - * Manjunatha C Achar <a.manjunatha@samsung.com> - * - * Ext4fs support - * made from existing cmd_ext2.c file of Uboot - * - * (C) Copyright 2004 - * esd gmbh <www.esd-electronics.com> - * Reinhard Arlt <reinhard.arlt@esd-electronics.com> - * - * made from cmd_reiserfs by - * - * (C) Copyright 2003 - 2004 - * Sysgo Real-Time Solutions, AG <www.elinos.com> - * Pavel Bartusek <pba@sysgo.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Changelog: - * 0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c - * file in uboot. Added ext4fs ls load and write support. - */ - -#include <common.h> -#include <part.h> -#include <config.h> -#include <command.h> -#include <image.h> -#include <linux/ctype.h> -#include <asm/byteorder.h> -#include <ext_common.h> -#include <ext4fs.h> -#include <linux/stat.h> -#include <malloc.h> - -#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) -#include <usb.h> -#endif - -#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION) -#error DOS or EFI partition support must be selected -#endif - -#define DOS_PART_MAGIC_OFFSET 0x1fe -#define DOS_FS_TYPE_OFFSET 0x36 -#define DOS_FS32_TYPE_OFFSET 0x52 - -int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc, - char *const argv[]) -{ - char *filename = NULL; - int dev, part; - ulong addr = 0; - int filelen; - disk_partition_t info; - block_dev_desc_t *dev_desc; - char buf[12]; - unsigned long count; - const char *addr_str; - - count = 0; - addr = simple_strtoul(argv[3], NULL, 16); - filename = getenv("bootfile"); - switch (argc) { - case 3: - addr_str = getenv("loadaddr"); - if (addr_str != NULL) - addr = simple_strtoul(addr_str, NULL, 16); - else - addr = CONFIG_SYS_LOAD_ADDR; - - break; - case 4: - break; - case 5: - filename = argv[4]; - break; - case 6: - filename = argv[4]; - count = simple_strtoul(argv[5], NULL, 16); - break; - - default: - return cmd_usage(cmdtp); - } - - if (!filename) { - puts("** No boot file defined **\n"); - return 1; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - printf("Loading file \"%s\" from %s device %d%c%c\n", - filename, argv[1], dev, - part ? ':' : ' ', part ? part + '0' : ' '); - - ext4fs_set_blk_dev(dev_desc, &info); - - if (!ext4fs_mount(info.size)) { - printf("** Bad ext2 partition or disk - %s %d:%d **\n", - argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - filelen = ext4fs_open(filename); - if (filelen < 0) { - printf("** File not found %s\n", filename); - ext4fs_close(); - goto fail; - } - if ((count < filelen) && (count != 0)) - filelen = count; - - if (ext4fs_read((char *)addr, filelen) != filelen) { - printf("** Unable to read \"%s\" from %s %d:%d **\n", - filename, argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - ext4fs_close(); - /* Loading ok, update default load address */ - load_addr = addr; - - printf("%d bytes read\n", filelen); - sprintf(buf, "%X", filelen); - setenv("filesize", buf); - - return 0; -fail: - return 1; -} - -int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - const char *filename = "/"; - int dev; - int part; - block_dev_desc_t *dev_desc; - disk_partition_t info; - - if (argc < 2) - return cmd_usage(cmdtp); - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - if (argc == 4) - filename = argv[3]; - - dev = dev_desc->dev; - ext4fs_set_blk_dev(dev_desc, &info); - - if (!ext4fs_mount(info.size)) { - printf("** Bad ext2 partition or disk - %s %d:%d **\n", - argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - if (ext4fs_ls(filename)) { - printf("** Error extfs_ls() **\n"); - ext4fs_close(); - goto fail; - }; - - ext4fs_close(); - return 0; - -fail: - return 1; -} diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 5a5698b056..86be044725 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -31,54 +31,11 @@ #include <ata.h> #include <part.h> #include <fat.h> - +#include <fs.h> int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - long size; - unsigned long offset; - unsigned long count = 0; - unsigned long pos = 0; - char buf [12]; - block_dev_desc_t *dev_desc=NULL; - disk_partition_t info; - int part, dev; - - if (argc < 5) { - printf("usage: fatload <interface> [<dev[:part]>] " - "<addr> <filename> [bytes [pos]]\n"); - return 1; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { - printf("\n** Unable to use %s %d:%d for fatload **\n", - argv[1], dev, part); - return 1; - } - offset = simple_strtoul(argv[3], NULL, 16); - if (argc >= 6) - count = simple_strtoul(argv[5], NULL, 16); - if (argc >= 7) - pos = simple_strtoul(argv[6], NULL, 16); - size = file_fat_read_at(argv[4], pos, (unsigned char *)offset, count); - - if(size==-1) { - printf("\n** Unable to read \"%s\" from %s %d:%d **\n", - argv[4], argv[1], dev, part); - return 1; - } - - printf("\n%ld bytes read\n", size); - - sprintf(buf, "%lX", size); - setenv("filesize", buf); - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16); } @@ -91,39 +48,13 @@ U_BOOT_CMD( " 'pos' gives the file position to start loading from.\n" " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n" " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n" - " the load stops on end of file." + " the load stops on end of file.\n" + " All numeric parameters are assumed to be hex." ); -int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - char *filename = "/"; - int ret, dev, part; - block_dev_desc_t *dev_desc=NULL; - disk_partition_t info; - - if (argc < 2) { - printf("usage: fatls <interface> [<dev[:part]>] [directory]\n"); - return 0; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { - printf("\n** Unable to use %s %d:%d for fatls **\n", - argv[1], dev, part); - return 1; - } - if (argc == 4) - ret = file_fat_ls(argv[3]); - else - ret = file_fat_ls(filename); - - if(ret!=0) - printf("No Fat FS detected\n"); - return ret; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT); } U_BOOT_CMD( @@ -133,7 +64,8 @@ U_BOOT_CMD( " - list files from 'dev' on 'interface' in a 'directory'" ); -int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int dev, part; block_dev_desc_t *dev_desc; @@ -149,7 +81,7 @@ int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { + if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for fatinfo **\n", argv[1], dev, part); return 1; @@ -185,7 +117,7 @@ static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag, dev = dev_desc->dev; - if (fat_register_device(dev_desc, part) != 0) { + if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for fatwrite **\n", argv[1], dev, part); return 1; diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index a5e2cfcbfa..9e2de34737 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -95,7 +95,7 @@ static int fdt_value_setenv(const void *nodep, int len, const char *var) /* * Flattened Device Tree command, see the help for parameter definitions. */ -int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return CMD_RET_USAGE; @@ -375,7 +375,7 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* Get address */ char buf[11]; - sprintf(buf, "0x%08X", (uint32_t)nodep); + sprintf(buf, "0x%p", nodep); setenv(var, buf); } else if (subcmd[0] == 's') { /* Get size */ @@ -682,7 +682,7 @@ static int fdt_parse_prop(char * const *newval, int count, char *data, int *len) cp = newp; tmp = simple_strtoul(cp, &newp, 0); - *(uint32_t *)data = __cpu_to_be32(tmp); + *(__be32 *)data = __cpu_to_be32(tmp); data += 4; *len += 4; @@ -816,9 +816,9 @@ static void print_data(const void *data, int len) if ((len %4) == 0) { if (len > CONFIG_CMD_FDT_MAX_DUMP) - printf("* 0x%08x [0x%08x]", (unsigned int)data, len); + printf("* 0x%p [0x%08x]", data, len); else { - const u32 *p; + const __be32 *p; printf("<"); for (j = 0, p = data; j < len/4; j++) @@ -828,7 +828,7 @@ static void print_data(const void *data, int len) } } else { /* anything else... hexdump */ if (len > CONFIG_CMD_FDT_MAX_DUMP) - printf("* 0x%08x [0x%08x]", (unsigned int)data, len); + printf("* 0x%p [0x%08x]", data, len); else { const u8 *s; @@ -964,11 +964,9 @@ static int fdt_print(const char *pathp, char *prop, int depth) } /********************************************************************/ - -U_BOOT_CMD( - fdt, 255, 0, do_fdt, - "flattened device tree utility commands", - "addr <addr> [<length>] - Set the fdt location to <addr>\n" +#ifdef CONFIG_SYS_LONGHELP +static char fdt_help_text[] = + "addr <addr> [<length>] - Set the fdt location to <addr>\n" #ifdef CONFIG_OF_BOARD_SETUP "fdt boardsetup - Do board-specific set up\n" #endif @@ -992,5 +990,10 @@ U_BOOT_CMD( "fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n" " <start>/<end> - initrd start/end addr\n" "NOTE: Dereference aliases by omiting the leading '/', " - "e.g. fdt print ethernet0." + "e.g. fdt print ethernet0."; +#endif + +U_BOOT_CMD( + fdt, 255, 0, do_fdt, + "flattened device tree utility commands", fdt_help_text ); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index e55d366c65..687eb68db1 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -289,7 +289,7 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, } #endif /* CONFIG_SYS_NO_FLASH */ -int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_flinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifndef CONFIG_SYS_NO_FLASH ulong bank; @@ -321,7 +321,7 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_flerase(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifndef CONFIG_SYS_NO_FLASH flash_info_t *info = NULL; @@ -454,7 +454,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) } #endif /* CONFIG_SYS_NO_FLASH */ -int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_protect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int rcode = 0; #ifndef CONFIG_SYS_NO_FLASH diff --git a/common/cmd_fs.c b/common/cmd_fs.c new file mode 100644 index 0000000000..a681d03d1b --- /dev/null +++ b/common/cmd_fs.c @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * Inspired by cmd_ext_common.c, cmd_fat.c. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <command.h> +#include <fs.h> + +int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0); +} + +U_BOOT_CMD( + load, 7, 0, do_load_wrapper, + "load binary file from a filesystem", + "<interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]\n" + " - Load binary file 'filename' from partition 'part' on device\n" + " type 'interface' instance 'dev' to address 'addr' in memory.\n" + " 'bytes' gives the size to load in bytes.\n" + " If 'bytes' is 0 or omitted, the file is read until the end.\n" + " 'pos' gives the file byte position to start reading from.\n" + " If 'pos' is 0 or omitted, the file is read from the start.\n" + " All numeric parameters are assumed to be decimal,\n" + " unless specified otherwise using a leading \"0x\"." +); + +int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_ANY); +} + +U_BOOT_CMD( + ls, 4, 1, do_ls_wrapper, + "list files in a directory (default /)", + "<interface> [<dev[:part]> [directory]]\n" + " - List files in directory 'directory' of partition 'part' on\n" + " device type 'interface' instance 'dev'." +); diff --git a/common/cmd_help.c b/common/cmd_help.c index 3178a1aa42..f832a96971 100644 --- a/common/cmd_help.c +++ b/common/cmd_help.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd); const int len = ll_entry_count(cmd_tbl_t, cmd); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 82e63e1322..4438db594c 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -133,7 +133,7 @@ DECLARE_GLOBAL_DATA_PTR; #define DISP_LINE_LEN 16 /* implement possible board specific board init */ -void __def_i2c_init_board(void) +static void __def_i2c_init_board(void) { return; } @@ -141,14 +141,14 @@ void i2c_init_board(void) __attribute__((weak, alias("__def_i2c_init_board"))); /* TODO: Implement architecture-specific get/set functions */ -unsigned int __def_i2c_get_bus_speed(void) +static unsigned int __def_i2c_get_bus_speed(void) { return CONFIG_SYS_I2C_SPEED; } unsigned int i2c_get_bus_speed(void) __attribute__((weak, alias("__def_i2c_get_bus_speed"))); -int __def_i2c_set_bus_speed(unsigned int speed) +static int __def_i2c_set_bus_speed(unsigned int speed) { if (speed != CONFIG_SYS_I2C_SPEED) return -1; @@ -1376,10 +1376,8 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } /***************************************************/ - -U_BOOT_CMD( - i2c, 6, 1, do_i2c, - "I2C sub-system", +#ifdef CONFIG_SYS_LONGHELP +static char i2c_help_text[] = #if defined(CONFIG_I2C_MUX) "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " #endif /* CONFIG_I2C_MUX */ @@ -1399,7 +1397,13 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_SDRAM) "i2c sdram chip - print SDRAM configuration information\n" #endif - "i2c speed [speed] - show or set I2C bus speed" + "i2c speed [speed] - show or set I2C bus speed"; +#endif + +U_BOOT_CMD( + i2c, 6, 1, do_i2c, + "I2C sub-system", + i2c_help_text ); #if defined(CONFIG_I2C_MUX) diff --git a/common/cmd_ide.c b/common/cmd_ide.c index d508e9f75b..0105bdbb7f 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -96,7 +96,8 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len #ifdef CONFIG_ATAPI static void atapi_inquiry(block_dev_desc_t *dev_desc); -ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer); +static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, + void *buffer); #endif @@ -826,7 +827,7 @@ static void ide_ident(block_dev_desc_t *dev_desc) /* ------------------------------------------------------------------------- */ -ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) +ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { ulong n = 0; unsigned char c; @@ -840,7 +841,7 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) lba48 = 1; } #endif - debug("ide_read dev %d start %lX, blocks %lX buffer at %lX\n", + debug("ide_read dev %d start %lX, blocks " LBAF " buffer at %lX\n", device, blknr, blkcnt, (ulong) buffer); ide_led(DEVICE_LED(device), 1); /* LED on */ @@ -930,13 +931,8 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) - printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n", + printf("Error (no IRQ) dev %d blk %ld: status %#02x\n", device, blknr, c); -#else - printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n", - device, (ulong) blknr, c); -#endif break; } @@ -955,7 +951,7 @@ IDE_READ_E: /* ------------------------------------------------------------------------- */ -ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer) +ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer) { ulong n = 0; unsigned char c; @@ -1023,13 +1019,8 @@ ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer) if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) - printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n", + printf("Error (no IRQ) dev %d blk %ld: status %#02x\n", device, blknr, c); -#else - printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n", - device, (ulong) blknr, c); -#endif goto WR_OUT; } @@ -1518,13 +1509,13 @@ static void atapi_inquiry(block_dev_desc_t *dev_desc) #define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */ #define ATAPI_READ_MAX_BLOCK (ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE) -ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) +ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { ulong n = 0; unsigned char ccb[12]; /* Command descriptor block */ ulong cnt; - debug("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n", + debug("atapi_read dev %d start %lX, blocks " LBAF " buffer at %lX\n", device, blknr, blkcnt, (ulong) buffer); do { diff --git a/common/cmd_irq.c b/common/cmd_irq.c index 9f158ef6e3..1e82883bd4 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -24,7 +24,8 @@ #include <config.h> #include <command.h> -int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc != 2) diff --git a/common/cmd_itest.c b/common/cmd_itest.c index d5df758a1f..2c8e5d05e1 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -130,7 +130,7 @@ static int arithcomp (char *s, char *t, int op, int w) return (0); } -int binary_test (char *op, char *arg1, char *arg2, int w) +static int binary_test(char *op, char *arg1, char *arg2, int w) { int len, i; const op_tbl_t *optp; @@ -155,7 +155,7 @@ int binary_test (char *op, char *arg1, char *arg2, int w) } /* command line interface to the shell test */ -int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) +static int do_itest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int value, w; diff --git a/common/cmd_load.c b/common/cmd_load.c index f4d66deae3..2c8dab1a0a 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -34,15 +34,15 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_CMD_LOADB) -static ulong load_serial_ymodem (ulong offset); +static ulong load_serial_ymodem(ulong offset); #endif #if defined(CONFIG_CMD_LOADS) -static ulong load_serial (long offset); -static int read_record (char *buf, ulong len); +static ulong load_serial(long offset); +static int read_record(char *buf, ulong len); # if defined(CONFIG_CMD_SAVES) -static int save_serial (ulong offset, ulong size); -static int write_record (char *buf); +static int save_serial(ulong offset, ulong size); +static int write_record(char *buf); #endif static int do_echo = 1; @@ -51,7 +51,8 @@ static int do_echo = 1; /* -------------------------------------------------------------------- */ #if defined(CONFIG_CMD_LOADS) -int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { long offset = 0; ulong addr; @@ -82,11 +83,11 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) load_baudrate = current_baudrate; } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", load_baudrate); udelay(50000); gd->baudrate = load_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -99,9 +100,9 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ - printf ("## Ready for S-Record download ...\n"); + printf("## Ready for S-Record download ...\n"); - addr = load_serial (offset); + addr = load_serial(offset); /* * Gather any trailing characters (for instance, the ^D which @@ -116,21 +117,21 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (addr == ~0) { - printf ("## S-Record download aborted\n"); + printf("## S-Record download aborted\n"); rcode = 1; } else { - printf ("## Start Addr = 0x%08lX\n", addr); + printf("## Start Addr = 0x%08lX\n", addr); load_addr = addr; } #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -140,8 +141,7 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -static ulong -load_serial (long offset) +static ulong load_serial(long offset) { char record[SREC_MAXRECLEN + 1]; /* buffer for one S-Record */ char binbuf[SREC_MAXBINLEN]; /* buffer for binary data */ @@ -156,7 +156,7 @@ load_serial (long offset) int line_count = 0; while (read_record(record, SREC_MAXRECLEN + 1) >= 0) { - type = srec_decode (record, &binlen, &addr, binbuf); + type = srec_decode(record, &binlen, &addr, binbuf); if (type < 0) { return (~0); /* Invalid S-Record */ @@ -173,13 +173,13 @@ load_serial (long offset) rc = flash_write((char *)binbuf,store_addr,binlen); if (rc != 0) { - flash_perror (rc); + flash_perror(rc); return (~0); } } else #endif { - memcpy ((char *)(store_addr), binbuf, binlen); + memcpy((char *)(store_addr), binbuf, binlen); } if ((store_addr) < start_addr) start_addr = store_addr; @@ -189,15 +189,15 @@ load_serial (long offset) case SREC_END2: case SREC_END3: case SREC_END4: - udelay (10000); + udelay(10000); size = end_addr - start_addr + 1; - printf ("\n" + printf("\n" "## First Load Addr = 0x%08lX\n" "## Last Load Addr = 0x%08lX\n" "## Total Size = 0x%08lX = %ld Bytes\n", start_addr, end_addr, size, size ); - flush_cache (start_addr, size); + flush_cache(start_addr, size); sprintf(buf, "%lX", size); setenv("filesize", buf); return (addr); @@ -208,15 +208,14 @@ load_serial (long offset) } if (!do_echo) { /* print a '.' every 100 lines */ if ((++line_count % 100) == 0) - putc ('.'); + putc('.'); } } return (~0); /* Download aborted */ } -static int -read_record (char *buf, ulong len) +static int read_record(char *buf, ulong len) { char *p; char c; @@ -226,7 +225,7 @@ read_record (char *buf, ulong len) for (p=buf; p < buf+len; ++p) { c = getc(); /* read character */ if (do_echo) - putc (c); /* ... and echo it */ + putc(c); /* ... and echo it */ switch (c) { case '\r': @@ -280,11 +279,11 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) save_baudrate = current_baudrate; } if (save_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", save_baudrate); udelay(50000); gd->baudrate = save_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -297,24 +296,24 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ - printf ("## Ready for S-Record upload, press ENTER to proceed ...\n"); + printf("## Ready for S-Record upload, press ENTER to proceed ...\n"); for (;;) { if (getc() == '\r') break; } - if(save_serial (offset, size)) { - printf ("## S-Record upload aborted\n"); + if (save_serial(offset, size)) { + printf("## S-Record upload aborted\n"); } else { - printf ("## S-Record upload complete\n"); + printf("## S-Record upload complete\n"); } #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE if (save_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", (int)current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -329,7 +328,7 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #define SREC3_END "S70500000000FA\n" #define SREC_BYTES_PER_RECORD 16 -static int save_serial (ulong address, ulong count) +static int save_serial(ulong address, ulong count) { int i, c, reclen, checksum, length; char *hex = "0123456789ABCDEF"; @@ -384,8 +383,7 @@ static int save_serial (ulong address, ulong count) return(0); } -static int -write_record (char *buf) +static int write_record(char *buf) { char c; @@ -425,15 +423,16 @@ write_record (char *buf) static void set_kerm_bin_mode(unsigned long *); static int k_recv(void); -static ulong load_serial_bin (ulong offset); +static ulong load_serial_bin(ulong offset); -char his_eol; /* character he needs at end of packet */ -int his_pad_count; /* number of pad chars he needs */ -char his_pad_char; /* pad chars he needs */ -char his_quote; /* quote chars he'll use */ +static char his_eol; /* character he needs at end of packet */ +static int his_pad_count; /* number of pad chars he needs */ +static char his_pad_char; /* pad chars he needs */ +static char his_quote; /* quote chars he'll use */ -int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { ulong offset = 0; ulong addr; @@ -463,11 +462,11 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", load_baudrate); udelay(50000); gd->baudrate = load_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -476,37 +475,37 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } if (strcmp(argv[0],"loady")==0) { - printf ("## Ready for binary (ymodem) download " + printf("## Ready for binary (ymodem) download " "to 0x%08lX at %d bps...\n", offset, load_baudrate); - addr = load_serial_ymodem (offset); + addr = load_serial_ymodem(offset); } else { - printf ("## Ready for binary (kermit) download " + printf("## Ready for binary (kermit) download " "to 0x%08lX at %d bps...\n", offset, load_baudrate); - addr = load_serial_bin (offset); + addr = load_serial_bin(offset); if (addr == ~0) { load_addr = 0; - printf ("## Binary (kermit) download aborted\n"); + printf("## Binary (kermit) download aborted\n"); rcode = 1; } else { - printf ("## Start Addr = 0x%08lX\n", addr); + printf("## Start Addr = 0x%08lX\n", addr); load_addr = addr; } } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -517,13 +516,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } -static ulong load_serial_bin (ulong offset) +static ulong load_serial_bin(ulong offset) { int size, i; char buf[32]; - set_kerm_bin_mode ((ulong *) offset); - size = k_recv (); + set_kerm_bin_mode((ulong *) offset); + size = k_recv(); /* * Gather any trailing characters (for instance, the ^D which @@ -537,7 +536,7 @@ static ulong load_serial_bin (ulong offset) udelay(1000); } - flush_cache (offset, size); + flush_cache(offset, size); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); sprintf(buf, "%X", size); @@ -546,16 +545,16 @@ static ulong load_serial_bin (ulong offset) return offset; } -void send_pad (void) +static void send_pad(void) { int count = his_pad_count; while (count-- > 0) - putc (his_pad_char); + putc(his_pad_char); } /* converts escaped kermit char to binary char */ -char ktrans (char in) +static char ktrans(char in) { if ((in & 0x60) == 0x40) { return (char) (in & ~0x40); @@ -565,7 +564,7 @@ char ktrans (char in) return in; } -int chk1 (char *buffer) +static int chk1(char *buffer) { int total = 0; @@ -575,67 +574,67 @@ int chk1 (char *buffer) return (int) ((total + ((total >> 6) & 0x03)) & 0x3f); } -void s1_sendpacket (char *packet) +static void s1_sendpacket(char *packet) { - send_pad (); + send_pad(); while (*packet) { - putc (*packet++); + putc(*packet++); } } static char a_b[24]; -void send_ack (int n) +static void send_ack(int n) { a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); + a_b[1] = tochar(3); + a_b[2] = tochar(n); a_b[3] = ACK_TYPE; a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); + a_b[4] = tochar(chk1(&a_b[1])); a_b[5] = his_eol; a_b[6] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } -void send_nack (int n) +static void send_nack(int n) { a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); + a_b[1] = tochar(3); + a_b[2] = tochar(n); a_b[3] = NACK_TYPE; a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); + a_b[4] = tochar(chk1(&a_b[1])); a_b[5] = his_eol; a_b[6] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } -void (*os_data_init) (void); -void (*os_data_char) (char new_char); +static void (*os_data_init)(void); +static void (*os_data_char)(char new_char); static int os_data_state, os_data_state_saved; static char *os_data_addr, *os_data_addr_saved; static char *bin_start_address; -static void bin_data_init (void) +static void bin_data_init(void) { os_data_state = 0; os_data_addr = bin_start_address; } -static void os_data_save (void) +static void os_data_save(void) { os_data_state_saved = os_data_state; os_data_addr_saved = os_data_addr; } -static void os_data_restore (void) +static void os_data_restore(void) { os_data_state = os_data_state_saved; os_data_addr = os_data_addr_saved; } -static void bin_data_char (char new_char) +static void bin_data_char(char new_char) { switch (os_data_state) { case 0: /* data */ @@ -644,7 +643,7 @@ static void bin_data_char (char new_char) } } -static void set_kerm_bin_mode (unsigned long *addr) +static void set_kerm_bin_mode(unsigned long *addr) { bin_start_address = (char *) addr; os_data_init = bin_data_init; @@ -654,29 +653,29 @@ static void set_kerm_bin_mode (unsigned long *addr) /* k_data_* simply handles the kermit escape translations */ static int k_data_escape, k_data_escape_saved; -void k_data_init (void) +static void k_data_init(void) { k_data_escape = 0; - os_data_init (); + os_data_init(); } -void k_data_save (void) +static void k_data_save(void) { k_data_escape_saved = k_data_escape; - os_data_save (); + os_data_save(); } -void k_data_restore (void) +static void k_data_restore(void) { k_data_escape = k_data_escape_saved; - os_data_restore (); + os_data_restore(); } -void k_data_char (char new_char) +static void k_data_char(char new_char) { if (k_data_escape) { /* last char was escape - translate this character */ - os_data_char (ktrans (new_char)); + os_data_char(ktrans(new_char)); k_data_escape = 0; } else { if (new_char == his_quote) { @@ -684,18 +683,18 @@ void k_data_char (char new_char) k_data_escape = 1; } else { /* otherwise send this char as-is */ - os_data_char (new_char); + os_data_char(new_char); } } } #define SEND_DATA_SIZE 20 -char send_parms[SEND_DATA_SIZE]; -char *send_ptr; +static char send_parms[SEND_DATA_SIZE]; +static char *send_ptr; /* handle_send_packet interprits the protocol info and builds and sends an appropriate ack for what we can do */ -void handle_send_packet (int n) +static void handle_send_packet(int n) { int length = 3; int bytes; @@ -715,30 +714,30 @@ void handle_send_packet (int n) break; /* handle MAXL - max length */ /* ignore what he says - most I'll take (here) is 94 */ - a_b[++length] = tochar (94); + a_b[++length] = tochar(94); if (bytes-- <= 0) break; /* handle TIME - time you should wait for my packets */ /* ignore what he says - don't wait for my ack longer than 1 second */ - a_b[++length] = tochar (1); + a_b[++length] = tochar(1); if (bytes-- <= 0) break; /* handle NPAD - number of pad chars I need */ /* remember what he says - I need none */ - his_pad_count = untochar (send_parms[2]); - a_b[++length] = tochar (0); + his_pad_count = untochar(send_parms[2]); + a_b[++length] = tochar(0); if (bytes-- <= 0) break; /* handle PADC - pad chars I need */ /* remember what he says - I need none */ - his_pad_char = ktrans (send_parms[3]); + his_pad_char = ktrans(send_parms[3]); a_b[++length] = 0x40; /* He should ignore this */ if (bytes-- <= 0) break; /* handle EOL - end of line he needs */ /* remember what he says - I need CR */ - his_eol = untochar (send_parms[4]); - a_b[++length] = tochar (END_CHAR); + his_eol = untochar(send_parms[4]); + a_b[++length] = tochar(END_CHAR); if (bytes-- <= 0) break; /* handle QCTL - quote control char he'll use */ @@ -764,25 +763,25 @@ void handle_send_packet (int n) break; /* handle CAPAS - the capabilities mask */ /* ignore what he says - I only do long packets - I don't do windows */ - a_b[++length] = tochar (2); /* only long packets */ - a_b[++length] = tochar (0); /* no windows */ - a_b[++length] = tochar (94); /* large packet msb */ - a_b[++length] = tochar (94); /* large packet lsb */ + a_b[++length] = tochar(2); /* only long packets */ + a_b[++length] = tochar(0); /* no windows */ + a_b[++length] = tochar(94); /* large packet msb */ + a_b[++length] = tochar(94); /* large packet lsb */ } while (0); a_b[0] = START_CHAR; - a_b[1] = tochar (length); - a_b[2] = tochar (n); + a_b[1] = tochar(length); + a_b[2] = tochar(n); a_b[3] = ACK_TYPE; a_b[++length] = '\0'; - a_b[length] = tochar (chk1 (&a_b[1])); + a_b[length] = tochar(chk1(&a_b[1])); a_b[++length] = his_eol; a_b[++length] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } /* k_recv receives a OS Open image file over kermit line */ -static int k_recv (void) +static int k_recv(void) { char new_char; char k_state, k_state_saved; @@ -801,9 +800,9 @@ static int k_recv (void) /* initialize the k_recv and k_data state machine */ done = 0; k_state = 0; - k_data_init (); + k_data_init(); k_state_saved = k_state; - k_data_save (); + k_data_save(); n = 0; /* just to get rid of a warning */ last_n = -1; @@ -848,17 +847,17 @@ static int k_recv (void) START: /* get length of packet */ sum = 0; - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - length = untochar (new_char); + length = untochar(new_char); /* get sequence number */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - n = untochar (new_char); + n = untochar(new_char); --length; /* NEW CODE - check sequence numbers for retried packets */ @@ -871,17 +870,17 @@ START: if (n == last_n) { /* same sequence number, restore the previous state */ k_state = k_state_saved; - k_data_restore (); + k_data_restore(); } else { /* new sequence number, checkpoint the download */ last_n = n; k_state_saved = k_state; - k_data_save (); + k_data_save(); } /* END NEW CODE */ /* get packet type */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -891,29 +890,29 @@ START: if (length == -2) { /* (length byte was 0, decremented twice) */ /* get the two length bytes */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - len_hi = untochar (new_char); - new_char = getc (); + len_hi = untochar(new_char); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - len_lo = untochar (new_char); + len_lo = untochar(new_char); length = len_hi * 95 + len_lo; /* check header checksum */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) + if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) goto packet_error; sum += new_char & 0xff; /* --length; */ /* new length includes only data and block check to come */ } /* bring in rest of packet */ while (length > 1) { - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -930,26 +929,26 @@ START: } } /* get and validate checksum character */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) + if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) goto packet_error; /* get END_CHAR */ - new_char = getc (); + new_char = getc(); if (new_char != END_CHAR) { packet_error: /* restore state machines */ k_state = k_state_saved; - k_data_restore (); + k_data_restore(); /* send a negative acknowledge packet in */ - send_nack (n); + send_nack(n); } else if (k_state == SEND_TYPE) { /* crack the protocol parms, build an appropriate ack packet */ - handle_send_packet (n); + handle_send_packet(n); } else { /* send simple acknowledge packet in */ - send_ack (n); + send_ack(n); /* quit if end of transmission */ if (k_state == BREAK_TYPE) done = 1; @@ -963,7 +962,7 @@ static int getcxmodem(void) { return (getc()); return -1; } -static ulong load_serial_ymodem (ulong offset) +static ulong load_serial_ymodem(ulong offset) { int size; char buf[32]; @@ -976,19 +975,19 @@ static ulong load_serial_ymodem (ulong offset) size = 0; info.mode = xyzModem_ymodem; - res = xyzModem_stream_open (&info, &err); + res = xyzModem_stream_open(&info, &err); if (!res) { while ((res = - xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) { + xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0) { store_addr = addr + offset; size += res; addr += res; #ifndef CONFIG_SYS_NO_FLASH - if (addr2info (store_addr)) { + if (addr2info(store_addr)) { int rc; - rc = flash_write ((char *) ymodemBuf, + rc = flash_write((char *) ymodemBuf, store_addr, res); if (rc != 0) { flash_perror (rc); @@ -997,24 +996,24 @@ static ulong load_serial_ymodem (ulong offset) } else #endif { - memcpy ((char *) (store_addr), ymodemBuf, + memcpy((char *)(store_addr), ymodemBuf, res); } } } else { - printf ("%s\n", xyzModem_error (err)); + printf("%s\n", xyzModem_error(err)); } - xyzModem_stream_close (&err); - xyzModem_stream_terminate (false, &getcxmodem); + xyzModem_stream_close(&err); + xyzModem_stream_terminate(false, &getcxmodem); - flush_cache (offset, size); + flush_cache(offset, size); - printf ("## Total Size = 0x%08x = %d Bytes\n", size, size); - sprintf (buf, "%X", size); - setenv ("filesize", buf); + printf("## Total Size = 0x%08x = %d Bytes\n", size, size); + sprintf(buf, "%X", size); + setenv("filesize", buf); return offset; } @@ -1091,7 +1090,7 @@ U_BOOT_CMD( /* -------------------------------------------------------------------- */ #if defined(CONFIG_CMD_HWFLOW) -int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { extern int hwflow_onoff(int); diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c index 77d8df12c5..ff0063b30d 100644 --- a/common/cmd_mdio.c +++ b/common/cmd_mdio.c @@ -57,9 +57,9 @@ static int extract_range(char *input, int *plo, int *phi) return 0; } -int mdio_write_ranges(struct mii_dev *bus, int addrlo, - int addrhi, int devadlo, int devadhi, - int reglo, int reghi, unsigned short data) +static int mdio_write_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi, unsigned short data) { int addr, devad, reg; int err = 0; @@ -79,9 +79,9 @@ err_out: return err; } -int mdio_read_ranges(struct mii_dev *bus, int addrlo, - int addrhi, int devadlo, int devadhi, - int reglo, int reghi) +static int mdio_read_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi) { int addr, devad, reg; @@ -112,8 +112,8 @@ int mdio_read_ranges(struct mii_dev *bus, int addrlo, } /* The register will be in the form [a[-b].]x[-y] */ -int extract_reg_range(char *input, int *devadlo, int *devadhi, - int *reglo, int *reghi) +static int extract_reg_range(char *input, int *devadlo, int *devadhi, + int *reglo, int *reghi) { char *regstr; @@ -141,8 +141,8 @@ int extract_reg_range(char *input, int *devadlo, int *devadhi, return extract_range(regstr, reglo, reghi); } -int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, - int *addrlo, int *addrhi) +static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, + int *addrlo, int *addrhi) { struct phy_device *phydev; diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 18f0a3f50f..4d64cfffde 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -51,7 +51,7 @@ static ulong base_address = 0; * md{.b, .w, .l} {addr} {len} */ #define DISP_LINE_LEN 16 -int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, length; #if defined(CONFIG_HAS_DATAFLASH) @@ -147,16 +147,16 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return (rc); } -int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return mod_mem (cmdtp, 1, flag, argc, argv); } -int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_nm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return mod_mem (cmdtp, 0, flag, argc, argv); } -int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, writeval, count; int size; @@ -253,7 +253,7 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_MX_CYCLIC */ -int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr1, addr2, count, ngood; int size; @@ -323,7 +323,7 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, dest, count; int size; @@ -433,7 +433,8 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc > 1) { /* Set new base address. @@ -446,7 +447,8 @@ int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { ulong addr, length, i; int size; @@ -592,7 +594,8 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until * interrupted by ctrl-c or by a failure of one of the sub-tests. */ -int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { vu_long *addr, *start, *end; ulong val; @@ -612,7 +615,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_MEMTEST_SCRATCH) vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH; #else - vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */ + vu_long *dummy = NULL; /* yes, this is address 0x0, not NULL */ #endif int j; @@ -1054,7 +1057,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) #ifndef CONFIG_CRC32_VERIFY -int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, length; ulong crc; diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 3b47a0c095..dc2772e85d 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -27,7 +27,7 @@ #include <common.h> #include <command.h> -int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_sleep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong start = get_timer(0); ulong delay; @@ -38,10 +38,10 @@ int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ; while (get_timer(start) < delay) { - if (ctrlc ()) + if (ctrlc()) return (-1); - udelay (100); + udelay(100); } return 0; diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 79a1088f3b..62a1c224d3 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -115,7 +115,7 @@ static void print_mmcinfo(struct mmc *mmc) printf("Bus Width: %d-bit\n", mmc->bus_width); } -int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct mmc *mmc; @@ -147,7 +147,7 @@ U_BOOT_CMD( "- dislay info of the current MMC device" ); -int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { enum mmc_state state; @@ -269,7 +269,7 @@ int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr = (void *)simple_strtoul(argv[idx], NULL, 16); ++idx; } else - addr = 0; + addr = NULL; blk = simple_strtoul(argv[idx], NULL, 16); cnt = simple_strtoul(argv[idx + 1], NULL, 16); diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 4b27be4956..2143814d4f 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -23,7 +23,7 @@ #include <common.h> #include <command.h> -int +static int cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long cpuid; @@ -61,8 +61,14 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#ifdef CONFIG_SYS_LONGHELP +static char cpu_help_text[] = + "<num> reset - Reset cpu <num>\n" + "cpu <num> status - Status of cpu <num>\n" + "cpu <num> disable - Disable cpu <num>\n" + "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" #ifdef CONFIG_PPC -#define CPU_ARCH_HELP \ + "\n" " [args] : <pir> <r3> <r6>\n" \ " pir - processor id (if writeable)\n" \ " r3 - value for gpr 3\n" \ @@ -74,16 +80,10 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) " When cpu <num> is released r4 and r5 = 0.\n" \ " r7 will contain the size of the initial mapped area" #endif + ""; +#endif U_BOOT_CMD( cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd, - "Multiprocessor CPU boot manipulation and release", - "<num> reset - Reset cpu <num>\n" - "cpu <num> status - Status of cpu <num>\n" - "cpu <num> disable - Disable cpu <num>\n" - "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" -#ifdef CPU_ARCH_HELP - "\n" - CPU_ARCH_HELP -#endif + "Multiprocessor CPU boot manipulation and release", cpu_help_text ); diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 22688293ae..06fc171fe3 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -147,10 +147,10 @@ static char last_partition[PARTITION_MAXLEN]; extern void jffs2_free_cache(struct part_info *part); /* mtdids mapping list, filled by parse_ids() */ -struct list_head mtdids; +static struct list_head mtdids; /* device/partition list, parse_cmdline() parses into here */ -struct list_head devices; +static struct list_head devices; /* current active device and partition number */ struct mtd_device *current_mtd_dev = NULL; @@ -710,7 +710,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i * @param size a pointer to the size of the mtd device (output) * @return 0 if device is valid, 1 otherwise */ -int mtd_device_validate(u8 type, u8 num, u32 *size) +static int mtd_device_validate(u8 type, u8 num, u32 *size) { struct mtd_info *mtd = NULL; @@ -1042,7 +1042,8 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_ * @param dev_num parsed device number (output) * @return 0 on success, 1 otherwise */ -int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num) +int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, + u8 *dev_num) { const char *p = id; @@ -1884,7 +1885,7 @@ static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part * @param argv arguments list * @return 0 on success, 1 otherwise */ -int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { /* command line only */ struct mtd_device *dev; @@ -1922,7 +1923,8 @@ int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * @param argv arguments list * @return 0 on success, 1 otherwise */ -int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc == 2) { if (strcmp(argv[1], "default") == 0) { @@ -2046,9 +2048,8 @@ U_BOOT_CMD( " - change active partition (e.g. part-id = nand0,1)" ); -U_BOOT_CMD( - mtdparts, 6, 0, do_mtdparts, - "define flash/nand partitions", +#ifdef CONFIG_SYS_LONGHELP +static char mtdparts_help_text[] = "\n" " - list partition table\n" "mtdparts delall\n" @@ -2090,6 +2091,11 @@ U_BOOT_CMD( "<size> := standard linux memsize OR '-' to denote all remaining space\n" "<offset> := partition start offset within the device\n" "<name> := '(' NAME ')'\n" - "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)" + "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)"; +#endif + +U_BOOT_CMD( + mtdparts, 6, 0, do_mtdparts, + "define flash/nand partitions", mtdparts_help_text ); /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index e24ed7f9c4..4b1606972b 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -373,8 +373,7 @@ static void nand_print_and_set_info(int idx) { nand_info_t *nand = &nand_info[idx]; struct nand_chip *chip = nand->priv; - const int bufsz = 32; - char buf[bufsz]; + char buf[32]; printf("Device %d: ", idx); if (chip->numchips > 1) @@ -429,7 +428,7 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, return ret; } -int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i, ret = 0; ulong addr; @@ -781,9 +780,8 @@ usage: return CMD_RET_USAGE; } -U_BOOT_CMD( - nand, CONFIG_SYS_MAXARGS, 1, do_nand, - "NAND sub-system", +#ifdef CONFIG_SYS_LONGHELP +static char nand_help_text[] = "info - show available NAND devices\n" "nand device [dev] - show or set current device\n" "nand read - addr off|partition size\n" @@ -829,6 +827,12 @@ U_BOOT_CMD( "nand env.oob set off|partition - set enviromnent offset\n" "nand env.oob get - get environment offset" #endif + ""; +#endif + +U_BOOT_CMD( + nand, CONFIG_SYS_MAXARGS, 1, do_nand, + "NAND sub-system", nand_help_text ); static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, @@ -913,7 +917,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, return bootm_maybe_autostart(cmdtp, cmd); } -int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { char *boot_device = NULL; int idx; diff --git a/common/cmd_net.c b/common/cmd_net.c index a9ade8b927..3b93ef27c0 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -30,9 +30,9 @@ static int netboot_common(enum proto_t, cmd_tbl_t *, int, char * const []); -int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_bootp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return netboot_common (BOOTP, cmdtp, argc, argv); + return netboot_common(BOOTP, cmdtp, argc, argv); } U_BOOT_CMD( @@ -41,7 +41,7 @@ U_BOOT_CMD( "[loadAddress] [[hostIPaddr:]bootfilename]" ); -int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int ret; @@ -91,9 +91,9 @@ U_BOOT_CMD( #ifdef CONFIG_CMD_RARP -int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_rarpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return netboot_common (RARP, cmdtp, argc, argv); + return netboot_common(RARP, cmdtp, argc, argv); } U_BOOT_CMD( @@ -104,7 +104,7 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_DHCP) -int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_dhcp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return netboot_common(DHCP, cmdtp, argc, argv); } @@ -117,7 +117,7 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_NFS) -int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_nfs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return netboot_common(NFS, cmdtp, argc, argv); } @@ -129,29 +129,29 @@ U_BOOT_CMD( ); #endif -static void netboot_update_env (void) +static void netboot_update_env(void) { char tmp[22]; if (NetOurGatewayIP) { - ip_to_string (NetOurGatewayIP, tmp); - setenv ("gatewayip", tmp); + ip_to_string(NetOurGatewayIP, tmp); + setenv("gatewayip", tmp); } if (NetOurSubnetMask) { - ip_to_string (NetOurSubnetMask, tmp); - setenv ("netmask", tmp); + ip_to_string(NetOurSubnetMask, tmp); + setenv("netmask", tmp); } if (NetOurHostName[0]) - setenv ("hostname", NetOurHostName); + setenv("hostname", NetOurHostName); if (NetOurRootPath[0]) - setenv ("rootpath", NetOurRootPath); + setenv("rootpath", NetOurRootPath); if (NetOurIP) { - ip_to_string (NetOurIP, tmp); - setenv ("ipaddr", tmp); + ip_to_string(NetOurIP, tmp); + setenv("ipaddr", tmp); } #if !defined(CONFIG_BOOTP_SERVERIP) /* @@ -159,35 +159,35 @@ static void netboot_update_env (void) * could have set it */ if (NetServerIP) { - ip_to_string (NetServerIP, tmp); - setenv ("serverip", tmp); + ip_to_string(NetServerIP, tmp); + setenv("serverip", tmp); } #endif if (NetOurDNSIP) { - ip_to_string (NetOurDNSIP, tmp); - setenv ("dnsip", tmp); + ip_to_string(NetOurDNSIP, tmp); + setenv("dnsip", tmp); } #if defined(CONFIG_BOOTP_DNS2) if (NetOurDNS2IP) { - ip_to_string (NetOurDNS2IP, tmp); - setenv ("dnsip2", tmp); + ip_to_string(NetOurDNS2IP, tmp); + setenv("dnsip2", tmp); } #endif if (NetOurNISDomain[0]) - setenv ("domain", NetOurNISDomain); + setenv("domain", NetOurNISDomain); #if defined(CONFIG_CMD_SNTP) \ && defined(CONFIG_BOOTP_TIMEOFFSET) if (NetTimeOffset) { - sprintf (tmp, "%d", NetTimeOffset); - setenv ("timeoffset", tmp); + sprintf(tmp, "%d", NetTimeOffset); + setenv("timeoffset", tmp); } #endif #if defined(CONFIG_CMD_SNTP) \ && defined(CONFIG_BOOTP_NTPSERVER) if (NetNtpServerIP) { - ip_to_string (NetNtpServerIP, tmp); - setenv ("ntpserverip", tmp); + ip_to_string(NetNtpServerIP, tmp); + setenv("ntpserverip", tmp); } #endif } @@ -224,7 +224,7 @@ static int netboot_common(enum proto_t proto, cmd_tbl_t *cmdtp, int argc, break; case 3: load_addr = simple_strtoul(argv[1], NULL, 16); - copy_filename (BootFile, argv[2], sizeof(BootFile)); + copy_filename(BootFile, argv[2], sizeof(BootFile)); break; @@ -274,7 +274,7 @@ static int netboot_common(enum proto_t proto, cmd_tbl_t *cmdtp, int argc, } #if defined(CONFIG_CMD_PING) -int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_ping(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return -1; @@ -322,7 +322,7 @@ static void cdp_update_env(void) } -int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_cdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int r; @@ -345,27 +345,29 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_SNTP) -int do_sntp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *toff; if (argc < 2) { - NetNtpServerIP = getenv_IPaddr ("ntpserverip"); + NetNtpServerIP = getenv_IPaddr("ntpserverip"); if (NetNtpServerIP == 0) { - printf ("ntpserverip not set\n"); + printf("ntpserverip not set\n"); return (1); } } else { NetNtpServerIP = string_to_ip(argv[1]); if (NetNtpServerIP == 0) { - printf ("Bad NTP server IP address\n"); + printf("Bad NTP server IP address\n"); return (1); } } - toff = getenv ("timeoffset"); - if (toff == NULL) NetTimeOffset = 0; - else NetTimeOffset = simple_strtol (toff, NULL, 10); + toff = getenv("timeoffset"); + if (toff == NULL) + NetTimeOffset = 0; + else + NetTimeOffset = simple_strtol(toff, NULL, 10); if (NetLoop(SNTP) < 0) { printf("SNTP failed: host %pI4 not responding\n", diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 68c38f4e5c..006131f45c 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -136,7 +136,8 @@ static int env_print(char *name) return 0; } -int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int i; int rcode = 0; @@ -322,7 +323,7 @@ int env_check_apply(const char *name, const char *oldval, * Set a new environment variable, * or replace or delete an existing one. */ -int _do_env_set(int flag, int argc, char * const argv[]) +static int _do_env_set(int flag, int argc, char * const argv[]) { int i, len; char *name, *value, *s; @@ -435,7 +436,7 @@ int setenv_addr(const char *varname, const void *addr) } #ifndef CONFIG_SPL_BUILD -int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return CMD_RET_USAGE; @@ -514,7 +515,8 @@ int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Interactively edit an environment variable */ #if defined(CONFIG_CMD_EDITENV) -int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { char buffer[CONFIG_SYS_CBSIZE]; char *init_val; @@ -622,7 +624,8 @@ ulong getenv_ulong(const char *name, int base, ulong default_val) #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) -int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { printf("Saving Environment to %s...\n", env_name_spec); @@ -1020,9 +1023,8 @@ static int do_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } -U_BOOT_CMD( - env, CONFIG_SYS_MAXARGS, 1, do_env, - "environment handling commands", +#ifdef CONFIG_SYS_LONGHELP +static char env_help_text[] = #if defined(CONFIG_CMD_ASKENV) "ask name [message] [size] - ask for environment variable\nenv " #endif @@ -1047,7 +1049,12 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) "env save - save environment\n" #endif - "env set [-f] name [arg ...]\n" + "env set [-f] name [arg ...]\n"; +#endif + +U_BOOT_CMD( + env, CONFIG_SYS_MAXARGS, 1, do_env, + "environment handling commands", env_help_text ); /* diff --git a/common/cmd_pci.c b/common/cmd_pci.c index a1fe519f61..8550b64008 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -35,8 +35,6 @@ #include <asm/io.h> #include <pci.h> -unsigned char ShortPCIListing = 1; - /* * Follows routines for the output of infos about devices on PCI bus. */ @@ -408,7 +406,7 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag * pci modify[.b, .w, .l] bus.device.function [addr] * pci write[.b, .w, .l] bus.device.function addr value */ -int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr = 0, value = 0, size = 0; pci_dev_t bdf = 0; @@ -485,10 +483,8 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ - -U_BOOT_CMD( - pci, 5, 1, do_pci, - "list and access PCI Configuration Space", +#ifdef CONFIG_SYS_LONGHELP +static char pci_help_text[] = "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" #ifdef CONFIG_CMD_PCI_ENUM @@ -504,5 +500,10 @@ U_BOOT_CMD( "pci modify[.b, .w, .l] b.d.f address\n" " - modify, auto increment CFG address\n" "pci write[.b, .w, .l] b.d.f address value\n" - " - write to CFG address" + " - write to CFG address"; +#endif + +U_BOOT_CMD( + pci, 5, 1, do_pci, + "list and access PCI Configuration Space", pci_help_text ); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 908876ce45..08a6563448 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -37,7 +37,8 @@ extern void mpc86xx_reginfo(void); extern void mpc85xx_reginfo(void); #endif -int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { #if defined(CONFIG_8xx) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; diff --git a/common/cmd_sata.c b/common/cmd_sata.c index 3f98235a38..b401bd1024 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -28,7 +28,7 @@ #include <part.h> #include <sata.h> -int sata_curr_device = -1; +static int sata_curr_device = -1; block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; int __sata_initialize(void) @@ -67,7 +67,7 @@ block_dev_desc_t *sata_get_dev(int dev) } #endif -int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int rc = 0; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 22d0119814..266bfa6905 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -34,6 +34,9 @@ #include <image.h> #include <pci.h> +#ifdef CONFIG_SCSI_DEV_LIST +#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST +#else #ifdef CONFIG_SCSI_SYM53C8XX #define SCSI_VEND_ID 0x1000 #ifndef CONFIG_SCSI_DEV_ID @@ -49,8 +52,12 @@ #elif !defined(CONFIG_SCSI_AHCI_PLAT) #error no scsi device defined #endif +#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#endif - +#ifdef CONFIG_PCI +const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; +#endif static ccb tempccb; /* temporary scsi command buffer */ static unsigned char tempbuff[512]; /* temporary data buffer */ @@ -65,14 +72,19 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; * forward declerations of some Setup Routines */ void scsi_setup_test_unit_ready(ccb * pccb); -void scsi_setup_read_capacity(ccb * pccb); void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks); void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks); +static void scsi_setup_write_ext(ccb *pccb, unsigned long start, + unsigned short blocks); void scsi_setup_inquiry(ccb * pccb); void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); -ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer); +static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, + unsigned long *blksz); +static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer); +static ulong scsi_write(int device, ulong blknr, + lbaint_t blkcnt, const void *buffer); /********************************************************************************* @@ -82,7 +94,8 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer); void scsi_scan(int mode) { unsigned char i,perq,modi,lun; - unsigned long capacity,blksz; + lbaint_t capacity; + unsigned long blksz; ccb* pccb=(ccb *)&tempccb; if(mode==1) { @@ -102,6 +115,7 @@ void scsi_scan(int mode) scsi_dev_desc[i].dev=i; scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN; scsi_dev_desc[i].block_read=scsi_read; + scsi_dev_desc[i].block_write = scsi_write; } scsi_max_devs=0; for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) { @@ -146,16 +160,10 @@ void scsi_scan(int mode) scsi_print_error(pccb); continue; } - pccb->datalen=8; - scsi_setup_read_capacity(pccb); - if(scsi_exec(pccb)!=TRUE) { + if (scsi_read_capacity(pccb, &capacity, &blksz)) { scsi_print_error(pccb); continue; } - capacity=((unsigned long)tempbuff[0]<<24)|((unsigned long)tempbuff[1]<<16)| - ((unsigned long)tempbuff[2]<<8)|((unsigned long)tempbuff[3]); - blksz=((unsigned long)tempbuff[4]<<24)|((unsigned long)tempbuff[5]<<16)| - ((unsigned long)tempbuff[6]<<8)|((unsigned long)tempbuff[7]); scsi_dev_desc[scsi_max_devs].lba=capacity; scsi_dev_desc[scsi_max_devs].blksz=blksz; scsi_dev_desc[scsi_max_devs].type=perq; @@ -172,21 +180,52 @@ removable: scsi_curr_dev=0; else scsi_curr_dev = -1; + + printf("Found %d device(s).\n", scsi_max_devs); + setenv_ulong("scsidevs", scsi_max_devs); +} + +int scsi_get_disk_count(void) +{ + return scsi_max_devs; } #ifdef CONFIG_PCI void scsi_init(void) { int busdevfunc; + int i; + /* + * Find a device from the list, this driver will support a single + * controller. + */ + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + /* get PCI Device ID */ + busdevfunc = pci_find_device(scsi_device_list[i].vendor, + scsi_device_list[i].device, + 0); + if (busdevfunc != -1) + break; + } - busdevfunc=pci_find_device(SCSI_VEND_ID,SCSI_DEV_ID,0); /* get PCI Device ID */ - if(busdevfunc==-1) { - printf("Error SCSI Controller (%04X,%04X) not found\n",SCSI_VEND_ID,SCSI_DEV_ID); + if (busdevfunc == -1) { + printf("Error: SCSI Controller(s) "); + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + printf("%04X:%04X ", + scsi_device_list[i].vendor, + scsi_device_list[i].device); + } + printf("not found\n"); return; } #ifdef DEBUG else { - printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",SCSI_VEND_ID,SCSI_DEV_ID,(busdevfunc>>16)&0xFF,(busdevfunc>>11)&0x1F,(busdevfunc>>8)&0x7); + printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", + scsi_device_list[i].vendor, + scsi_device_list[i].device, + (busdevfunc >> 16) & 0xFF, + (busdevfunc >> 11) & 0x1F, + (busdevfunc >> 8) & 0x7); } #endif scsi_low_level_init(busdevfunc); @@ -305,6 +344,19 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr); printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); return 0; + } else if (strcmp(argv[1], "write") == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong blk = simple_strtoul(argv[3], NULL, 16); + ulong cnt = simple_strtoul(argv[4], NULL, 16); + ulong n; + printf("\nSCSI write: device %d block # %ld, " + "count %ld ... ", + scsi_curr_dev, blk, cnt); + n = scsi_write(scsi_curr_dev, blk, cnt, + (ulong *)addr); + printf("%ld blocks written: %s\n", n, + (n == cnt) ? "OK" : "ERROR"); + return 0; } } /* switch */ return CMD_RET_USAGE; @@ -316,9 +368,10 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */ -ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) +static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { - ulong start,blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; ccb* pccb=(ccb *)&tempccb; device&=0xff; @@ -329,7 +382,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) buf_addr=(unsigned long)buffer; start=blknr; blks=blkcnt; - debug ("\nscsi_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks,(unsigned long)buffer); + debug("\nscsi_read: dev %d startblk " LBAF + ", blccnt " LBAF " buffer %lx\n", + device, start, blks, (unsigned long)buffer); do { pccb->pdata=(unsigned char *)buf_addr; if(blks>SCSI_MAX_READ_BLK) { @@ -346,7 +401,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) start+=blks; blks=0; } - debug ("scsi_read_ext: startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); + debug("scsi_read_ext: startblk " LBAF + ", blccnt %x buffer %lx\n", + start, smallblks, buf_addr); if(scsi_exec(pccb)!=TRUE) { scsi_print_error(pccb); blkcnt-=blks; @@ -354,10 +411,65 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) } buf_addr+=pccb->datalen; } while(blks!=0); - debug ("scsi_read_ext: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); + debug("scsi_read_ext: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); return(blkcnt); } +/******************************************************************************* + * scsi_write + */ + +/* Almost the maximum amount of the scsi_ext command.. */ +#define SCSI_MAX_WRITE_BLK 0xFFFF + +static ulong scsi_write(int device, ulong blknr, + lbaint_t blkcnt, const void *buffer) +{ + lbaint_t start, blks; + uintptr_t buf_addr; + unsigned short smallblks; + ccb* pccb = (ccb *)&tempccb; + device &= 0xff; + /* Setup device + */ + pccb->target = scsi_dev_desc[device].target; + pccb->lun = scsi_dev_desc[device].lun; + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", + __func__, device, start, blks, (unsigned long)buffer); + do { + pccb->pdata = (unsigned char *)buf_addr; + if (blks > SCSI_MAX_WRITE_BLK) { + pccb->datalen = (scsi_dev_desc[device].blksz * + SCSI_MAX_WRITE_BLK); + smallblks = SCSI_MAX_WRITE_BLK; + scsi_setup_write_ext(pccb, start, smallblks); + start += SCSI_MAX_WRITE_BLK; + blks -= SCSI_MAX_WRITE_BLK; + } else { + pccb->datalen = scsi_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + scsi_setup_write_ext(pccb, start, smallblks); + start += blks; + blks = 0; + } + debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n", + __func__, start, smallblks, buf_addr); + if (scsi_exec(pccb) != TRUE) { + scsi_print_error(pccb); + blkcnt -= blks; + break; + } + buf_addr += pccb->datalen; + } while (blks != 0); + debug("%s: end startblk " LBAF ", blccnt %x buffer %lx\n", + __func__, start, smallblks, buf_addr); + return blkcnt; +} + /* copy src to dest, skipping leading and trailing blanks * and null terminate the string */ @@ -398,6 +510,67 @@ void scsi_trim_trail (unsigned char *str, unsigned int len) } } +int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) +{ + *capacity = 0; + + memset(pccb->cmd, 0, sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 8; + if (scsi_exec(pccb) != TRUE) + return 1; + + *capacity = ((lbaint_t)pccb->pdata[0] << 24) | + ((lbaint_t)pccb->pdata[1] << 16) | + ((lbaint_t)pccb->pdata[2] << 8) | + ((lbaint_t)pccb->pdata[3]); + + if (*capacity != 0xffffffff) { + /* Read capacity (10) was sufficient for this drive. */ + *blksz = ((unsigned long)pccb->pdata[4] << 24) | + ((unsigned long)pccb->pdata[5] << 16) | + ((unsigned long)pccb->pdata[6] << 8) | + ((unsigned long)pccb->pdata[7]); + return 0; + } + + /* Read capacity (10) was insufficient. Use read capacity (16). */ + + memset(pccb->cmd, 0, sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC16; + pccb->cmd[1] = 0x10; + pccb->cmdlen = 16; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 16; + if (scsi_exec(pccb) != TRUE) + return 1; + + *capacity = ((uint64_t)pccb->pdata[0] << 56) | + ((uint64_t)pccb->pdata[1] << 48) | + ((uint64_t)pccb->pdata[2] << 40) | + ((uint64_t)pccb->pdata[3] << 32) | + ((uint64_t)pccb->pdata[4] << 24) | + ((uint64_t)pccb->pdata[5] << 16) | + ((uint64_t)pccb->pdata[6] << 8) | + ((uint64_t)pccb->pdata[7]); + + *blksz = ((uint64_t)pccb->pdata[8] << 56) | + ((uint64_t)pccb->pdata[9] << 48) | + ((uint64_t)pccb->pdata[10] << 40) | + ((uint64_t)pccb->pdata[11] << 32) | + ((uint64_t)pccb->pdata[12] << 24) | + ((uint64_t)pccb->pdata[13] << 16) | + ((uint64_t)pccb->pdata[14] << 8) | + ((uint64_t)pccb->pdata[15]); + + return 0; +} + /************************************************************************************ * Some setup (fill-in) routines @@ -414,23 +587,6 @@ void scsi_setup_test_unit_ready(ccb * pccb) pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ } -void scsi_setup_read_capacity(ccb * pccb) -{ - pccb->cmd[0]=SCSI_RD_CAPAC; - pccb->cmd[1]=pccb->lun<<5; - pccb->cmd[2]=0; - pccb->cmd[3]=0; - pccb->cmd[4]=0; - pccb->cmd[5]=0; - pccb->cmd[6]=0; - pccb->cmd[7]=0; - pccb->cmd[8]=0; - pccb->cmd[9]=0; - pccb->cmdlen=10; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ - -} - void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ10; @@ -451,6 +607,27 @@ void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) pccb->cmd[7],pccb->cmd[8]); } +void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks) +{ + pccb->cmd[0] = SCSI_WRITE10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff; + pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff; + pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff; + pccb->cmd[5] = ((unsigned char) (start)) & 0xff; + pccb->cmd[6] = 0; + pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff; + pccb->cmd[8] = (unsigned char)blocks & 0xff; + pccb->cmd[9] = 0; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", + __func__, + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[7], pccb->cmd[8]); +} + void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ6; @@ -492,7 +669,9 @@ U_BOOT_CMD( "scsi device [dev] - show or set current device\n" "scsi part [dev] - print partition table of one or all SCSI devices\n" "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'" + " to memory address `addr'\n" + "scsi write addr blk# cnt - write `cnt' blocks starting at block\n" + " `blk#' from memory address `addr'" ); U_BOOT_CMD( diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 1b3edb7b02..7b140deea3 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -50,7 +50,7 @@ static ulong get_arg(char *s, int w) } } -int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong a, b; char buf[16]; diff --git a/common/cmd_source.c b/common/cmd_source.c index c4cde982a5..02a862cc5a 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -177,9 +177,8 @@ do_source (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -U_BOOT_CMD( - source, 2, 0, do_source, - "run script from memory", +#ifdef CONFIG_SYS_LONGHELP +static char source_help_text[] = "[addr]\n" "\t- run script starting at addr\n" "\t- A valid image header must be present" @@ -188,5 +187,11 @@ U_BOOT_CMD( "For FIT format uImage addr must include subimage\n" "unit name in the form of addr:<subimg_uname>" #endif + ""; +#endif + +U_BOOT_CMD( + source, 2, 0, do_source, + "run script from memory", source_help_text ); #endif diff --git a/common/cmd_test.c b/common/cmd_test.c index 6da06b9f78..d4ec18672e 100644 --- a/common/cmd_test.c +++ b/common/cmd_test.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char * const *ap; int left, adv, expr, last_expr, neg, last_cmp; @@ -150,7 +150,7 @@ U_BOOT_CMD( "[args..]" ); -int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return 1; } @@ -161,7 +161,7 @@ U_BOOT_CMD( NULL ); -int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return 0; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index c128455d74..8ad0b23058 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -40,7 +40,7 @@ static int usb_ether_curr_dev = -1; /* current ethernet device */ #endif /* some display routines (info command) */ -char *usb_get_class_desc(unsigned char dclass) +static char *usb_get_class_desc(unsigned char dclass) { switch (dclass) { case USB_CLASS_PER_INTERFACE: @@ -66,8 +66,8 @@ char *usb_get_class_desc(unsigned char dclass) } } -void usb_display_class_sub(unsigned char dclass, unsigned char subclass, - unsigned char proto) +static void usb_display_class_sub(unsigned char dclass, unsigned char subclass, + unsigned char proto) { switch (dclass) { case USB_CLASS_PER_INTERFACE: @@ -148,7 +148,7 @@ void usb_display_class_sub(unsigned char dclass, unsigned char subclass, } } -void usb_display_string(struct usb_device *dev, int index) +static void usb_display_string(struct usb_device *dev, int index) { ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256); @@ -158,7 +158,7 @@ void usb_display_string(struct usb_device *dev, int index) } } -void usb_display_desc(struct usb_device *dev) +static void usb_display_desc(struct usb_device *dev) { if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) { printf("%d: %s, USB Revision %x.%x\n", dev->devnum, @@ -192,8 +192,8 @@ void usb_display_desc(struct usb_device *dev) } -void usb_display_conf_desc(struct usb_configuration_descriptor *config, - struct usb_device *dev) +static void usb_display_conf_desc(struct usb_configuration_descriptor *config, + struct usb_device *dev) { printf(" Configuration: %d\n", config->bConfigurationValue); printf(" - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces, @@ -207,8 +207,8 @@ void usb_display_conf_desc(struct usb_configuration_descriptor *config, } } -void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, - struct usb_device *dev) +static void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, + struct usb_device *dev) { printf(" Interface: %d\n", ifdesc->bInterfaceNumber); printf(" - Alternate Setting %d, Endpoints: %d\n", @@ -224,7 +224,7 @@ void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, } } -void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) +static void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) { printf(" - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf, (epdesc->bEndpointAddress & 0x80) ? "In" : "Out"); @@ -249,7 +249,7 @@ void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) } /* main routine to diasplay the configs, interfaces and endpoints */ -void usb_display_config(struct usb_device *dev) +static void usb_display_config(struct usb_device *dev) { struct usb_config *config; struct usb_interface *ifdesc; @@ -280,7 +280,7 @@ static inline char *portspeed(int speed) } /* shows the device tree recursively */ -void usb_show_tree_graph(struct usb_device *dev, char *pre) +static void usb_show_tree_graph(struct usb_device *dev, char *pre) { int i, index; int has_child, last_child; @@ -340,7 +340,7 @@ void usb_show_tree_graph(struct usb_device *dev, char *pre) } /* main routine for the tree command */ -void usb_show_tree(struct usb_device *dev) +static void usb_show_tree(struct usb_device *dev) { char preamble[32]; @@ -353,7 +353,7 @@ void usb_show_tree(struct usb_device *dev) * usb boot command intepreter. Derived from diskboot */ #ifdef CONFIG_USB_STORAGE -int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return common_diskboot(cmdtp, "usb", argc, argv); } @@ -363,7 +363,7 @@ int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /****************************************************************************** * usb command intepreter */ -int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i; diff --git a/common/cmd_version.c b/common/cmd_version.c index e4b2ac1efc..ab4c560ae0 100644 --- a/common/cmd_version.c +++ b/common/cmd_version.c @@ -28,7 +28,7 @@ const char __weak version_string[] = U_BOOT_VERSION_STRING; -int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { printf("\n%s\n", version_string); #ifdef CC_VERSION_STRING diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index 0414589bad..42a7eba766 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -42,7 +42,7 @@ #define CONFIG_SYS_XIMG_LEN 0x800000 #endif -int +static int do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { ulong addr = load_addr; @@ -264,9 +264,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } -U_BOOT_CMD( - imxtract, 4, 1, do_imgextract, - "extract a part of a multi-image", +#ifdef CONFIG_SYS_LONGHELP +static char imgextract_help_text[] = "addr part [dest]\n" " - extract <part> from legacy image at <addr> and copy to <dest>" #if defined(CONFIG_FIT) @@ -274,4 +273,10 @@ U_BOOT_CMD( "addr uname [dest]\n" " - extract <uname> subimage from FIT image at <addr> and copy to <dest>" #endif + ""; +#endif + +U_BOOT_CMD( + imxtract, 4, 1, do_imgextract, + "extract a part of a multi-image", imgextract_help_text ); diff --git a/common/cmd_zfs.c b/common/cmd_zfs.c index d580f7bca0..1df0c4d72a 100644 --- a/common/cmd_zfs.c +++ b/common/cmd_zfs.c @@ -46,7 +46,7 @@ #define DOS_FS_TYPE_OFFSET 0x36 #define DOS_FS32_TYPE_OFFSET 0x52 -static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *filename = NULL; int dev; @@ -146,7 +146,7 @@ int zfs_print(const char *entry, const struct zfs_dirhook_info *data) -static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { const char *filename = "/"; int part; diff --git a/common/command.c b/common/command.c index 50c84292c1..f51df26bf9 100644 --- a/common/command.c +++ b/common/command.c @@ -40,8 +40,15 @@ int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int int i; int rcode = 0; + if (cmd_items > CONFIG_SYS_MAXARGS) { + printf("%s: cmd_items %d exceeds hardcoded limit %d." + " Recompile with higher CONFIG_SYS_MAXARGS?\n", + __func__, cmd_items, CONFIG_SYS_MAXARGS); + return -1; + } + if (argc == 1) { /*show list of commands */ - cmd_tbl_t *cmd_array[cmd_items]; + cmd_tbl_t *cmd_array[CONFIG_SYS_MAXARGS]; int i, j, swaps; /* Make array of commands from .uboot_cmd section */ diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 1d7e527b9d..b2f0a1ad52 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1465,7 +1465,7 @@ typedef struct malloc_chunk* mbinptr; #define IAV(i) bin_at(i), bin_at(i) static mbinptr av_[NAV * 2 + 2] = { - 0, 0, + NULL, NULL, IAV(0), IAV(1), IAV(2), IAV(3), IAV(4), IAV(5), IAV(6), IAV(7), IAV(8), IAV(9), IAV(10), IAV(11), IAV(12), IAV(13), IAV(14), IAV(15), IAV(16), IAV(17), IAV(18), IAV(19), IAV(20), IAV(21), IAV(22), IAV(23), @@ -2173,10 +2173,10 @@ Void_t* mALLOc(bytes) size_t bytes; /* check if mem_malloc_init() was run */ if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) { /* not initialized yet */ - return 0; + return NULL; } - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; nb = request2size(bytes); /* padded request size; */ @@ -2379,7 +2379,7 @@ Void_t* mALLOc(bytes) size_t bytes; /* Try to extend */ malloc_extend_top(nb); if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE) - return 0; /* propagate failure */ + return NULL; /* propagate failure */ } victim = top; @@ -2433,7 +2433,7 @@ void fREe(mem) Void_t* mem; mchunkptr fwd; /* misc temp for linking */ int islr; /* track whether merging with last_remainder */ - if (mem == 0) /* free(0) has no effect */ + if (mem == NULL) /* free(0) has no effect */ return; p = mem2chunk(mem); @@ -2579,10 +2579,10 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; if (bytes == 0) { fREe(oldmem); return 0; } #endif - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; /* realloc of null is supposed to be same as malloc */ - if (oldmem == 0) return mALLOc(bytes); + if (oldmem == NULL) return mALLOc(bytes); newp = oldp = mem2chunk(oldmem); newsize = oldsize = chunksize(oldp); @@ -2643,7 +2643,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; } else { - next = 0; + next = NULL; nextsize = 0; } @@ -2656,7 +2656,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* try forward + backward first to save a later consolidation */ - if (next != 0) + if (next != NULL) { /* into top */ if (next == top) @@ -2689,7 +2689,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; } /* backward only */ - if (prev != 0 && (long)(prevsize + newsize) >= (long)nb) + if (prev != NULL && (long)(prevsize + newsize) >= (long)nb) { unlink(prev, bck, fwd); newp = prev; @@ -2704,8 +2704,8 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; newmem = mALLOc (bytes); - if (newmem == 0) /* propagate failure */ - return 0; + if (newmem == NULL) /* propagate failure */ + return NULL; /* Avoid copy if newp is next chunk after oldp. */ /* (This can only happen when new chunk is sbrk'ed.) */ @@ -2783,7 +2783,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; mchunkptr remainder; /* spare room at end to split off */ long remainder_size; /* its size */ - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; /* If need less alignment than we give anyway, just relay to malloc */ @@ -2798,7 +2798,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; nb = request2size(bytes); m = (char*)(mALLOc(nb + alignment + MINSIZE)); - if (m == 0) return 0; /* propagate failure */ + if (m == NULL) return NULL; /* propagate failure */ p = mem2chunk(m); @@ -2923,10 +2923,10 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; #endif Void_t* mem = mALLOc (sz); - if ((long)n < 0) return 0; + if ((long)n < 0) return NULL; - if (mem == 0) - return 0; + if (mem == NULL) + return NULL; else { p = mem2chunk(mem); @@ -3072,7 +3072,7 @@ size_t malloc_usable_size(mem) Void_t* mem; #endif { mchunkptr p; - if (mem == 0) + if (mem == NULL) return 0; else { diff --git a/common/hush.c b/common/hush.c index 4c84c2f501..eb6c879c53 100644 --- a/common/hush.c +++ b/common/hush.c @@ -289,8 +289,7 @@ struct variables { char **global_argv; unsigned int global_argc; #endif -unsigned int last_return_code; -int nesting_level; +static unsigned int last_return_code; #ifndef __U_BOOT__ extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */ #endif @@ -2172,7 +2171,7 @@ int set_local_var(const char *s, int flg_export) * NAME=VALUE format. So the first order of business is to * split 's' on the '=' into 'name' and 'value' */ value = strchr(name, '='); - if (value==0 && ++value==0) { + if (value == NULL && ++value == NULL) { free(name); return -1; } @@ -2207,13 +2206,13 @@ int set_local_var(const char *s, int flg_export) result = -1; } else { cur->name = strdup(name); - if(cur->name == 0) { + if (cur->name == NULL) { free(cur); result = -1; } else { struct variables *bottom = top_vars; cur->value = strdup(value); - cur->next = 0; + cur->next = NULL; cur->flg_export = flg_export; cur->flg_read_only = 0; while(bottom->next) bottom=bottom->next; @@ -2246,7 +2245,7 @@ void unset_local_var(const char *name) if(strcmp(cur->name, name)==0) break; } - if(cur!=0) { + if (cur != NULL) { struct variables *next = top_vars; if(cur->flg_read_only) { error_msg("%s: readonly variable", name); @@ -2329,7 +2328,8 @@ static int setup_redirect(struct p_context *ctx, int fd, redir_type style, } #endif -struct pipe *new_pipe(void) { +static struct pipe *new_pipe(void) +{ struct pipe *pi; pi = xmalloc(sizeof(struct pipe)); pi->num_progs = 0; @@ -2387,7 +2387,7 @@ static struct reserved_combo reserved_list[] = { }; #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo)) -int reserved_word(o_string *dest, struct p_context *ctx) +static int reserved_word(o_string *dest, struct p_context *ctx) { struct reserved_combo *r; for (r=reserved_list; @@ -2924,8 +2924,8 @@ int parse_string(o_string *dest, struct p_context *ctx, const char *src) #endif /* return code is 0 for normal exit, 1 for syntax error */ -int parse_stream(o_string *dest, struct p_context *ctx, - struct in_str *input, int end_trigger) +static int parse_stream(o_string *dest, struct p_context *ctx, + struct in_str *input, int end_trigger) { unsigned int ch, m; #ifndef __U_BOOT__ @@ -3124,13 +3124,13 @@ int parse_stream(o_string *dest, struct p_context *ctx, return 0; } -void mapset(const unsigned char *set, int code) +static void mapset(const unsigned char *set, int code) { const unsigned char *s; for (s=set; *s; s++) map[*s] = code; } -void update_ifs_map(void) +static void update_ifs_map(void) { /* char *ifs and char map[256] are both globals. */ ifs = (uchar *)getenv("IFS"); @@ -3158,7 +3158,7 @@ void update_ifs_map(void) /* most recursion does not come through here, the exeception is * from builtin_source() */ -int parse_stream_outer(struct in_str *inp, int flag) +static int parse_stream_outer(struct in_str *inp, int flag) { struct p_context ctx; @@ -3292,7 +3292,7 @@ int u_boot_hush_start(void) top_vars = malloc(sizeof(struct variables)); top_vars->name = "HUSH_VERSION"; top_vars->value = "0.01"; - top_vars->next = 0; + top_vars->next = NULL; top_vars->flg_export = 0; top_vars->flg_read_only = 1; #ifdef CONFIG_NEEDS_MANUAL_RELOC @@ -3628,7 +3628,8 @@ static char * make_string(char ** inp) } #ifdef __U_BOOT__ -int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int i, k; int rcode = 0; diff --git a/common/image.c b/common/image.c index 750a98b6ba..df642e656c 100644 --- a/common/image.c +++ b/common/image.c @@ -1279,7 +1279,7 @@ void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) { void *fdt_blob = *of_flat_tree; - void *of_start = 0; + void *of_start = NULL; char *fdt_high; ulong of_len = 0; int err; @@ -1312,7 +1312,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) of_start = (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, (ulong)desired_addr); - if (of_start == 0) { + if (of_start == NULL) { puts("Failed using fdt_high value for Device Tree"); goto error; } @@ -1327,7 +1327,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) + getenv_bootm_low()); } - if (of_start == 0) { + if (of_start == NULL) { puts("device tree - allocation error\n"); goto error; } @@ -1703,7 +1703,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], return 0; error: - *of_flat_tree = 0; + *of_flat_tree = NULL; *of_size = 0; return 1; } diff --git a/common/main.c b/common/main.c index 9507cec88b..592ce077d2 100644 --- a/common/main.c +++ b/common/main.c @@ -505,13 +505,13 @@ void reset_cmd_timeout(void) #define HIST_MAX 20 #define HIST_SIZE CONFIG_SYS_CBSIZE -static int hist_max = 0; -static int hist_add_idx = 0; +static int hist_max; +static int hist_add_idx; static int hist_cur = -1; -unsigned hist_num = 0; +static unsigned hist_num; -char* hist_list[HIST_MAX]; -char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ +static char *hist_list[HIST_MAX]; +static char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) diff --git a/common/update.c b/common/update.c index 5b1a064c29..94d6a82aeb 100644 --- a/common/update.c +++ b/common/update.c @@ -37,6 +37,7 @@ #include <command.h> #include <flash.h> #include <net.h> +#include <net/tftp.h> #include <malloc.h> /* env variable holding the location of the update file */ diff --git a/common/usb_storage.c b/common/usb_storage.c index 0c2a4c718f..2d92ee1bb3 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -192,7 +192,7 @@ block_dev_desc_t *usb_stor_get_dev(int index) } #endif -void usb_show_progress(void) +static void usb_show_progress(void) { debug("."); } @@ -437,7 +437,7 @@ static int usb_stor_BBB_reset(struct us_data *us) result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0), US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5); + 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5); if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { USB_STOR_PRINTF("RESET:stall\n"); @@ -500,7 +500,7 @@ static int usb_stor_CB_reset(struct us_data *us) * Set up the command for a BBB device. Note that the actual SCSI * command is copied into cbw.CBWCDB. */ -int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) +static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) { int result; int actlen; @@ -548,7 +548,7 @@ int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) /* FIXME: we also need a CBI_command which sets up the completion * interrupt, and waits for it */ -int usb_stor_CB_comdat(ccb *srb, struct us_data *us) +static int usb_stor_CB_comdat(ccb *srb, struct us_data *us) { int result = 0; int dir_in, retry; @@ -617,7 +617,7 @@ int usb_stor_CB_comdat(ccb *srb, struct us_data *us) } -int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) +static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) { int timeout; @@ -626,7 +626,7 @@ int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) (void *) &us->ip_data, us->irqmaxp, us->irqinterval); timeout = 1000; while (timeout--) { - if ((volatile int *) us->ip_wanted == 0) + if ((volatile int *) us->ip_wanted == NULL) break; mdelay(10); } @@ -665,18 +665,18 @@ int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) #define USB_TRANSPORT_NOT_READY_RETRY 10 /* clear a stall on an endpoint - special for BBB devices */ -int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt) +static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt) { int result; /* ENDPOINT_HALT = 0, so set value to 0 */ result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0), USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, - 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5); + 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5); return result; } -int usb_stor_BBB_transport(ccb *srb, struct us_data *us) +static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) { int result, retry; int dir_in; @@ -798,7 +798,7 @@ again: return result; } -int usb_stor_CB_transport(ccb *srb, struct us_data *us) +static int usb_stor_CB_transport(ccb *srb, struct us_data *us) { int result, status; ccb *psrb; diff --git a/common/xyzModem.c b/common/xyzModem.c index a1f955b9d7..f30b0020a3 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -100,7 +100,7 @@ static struct #ifndef REDBOOT /*SB */ typedef int cyg_int32; -int +static int CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) { #define DELAY 20 @@ -118,7 +118,7 @@ CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) return 0; } -void +static void CYGACC_COMM_IF_PUTC (char x, char y) { putc (y); @@ -165,7 +165,7 @@ _tolower (char c) } /* Parse (scan) a number */ -bool +static bool parse_num (char *s, unsigned long *val, char **es, char *delim) { bool first = true; diff --git a/doc/README.ext4 b/doc/README.ext4 index b3ea8b776d..b7d0ad3930 100644 --- a/doc/README.ext4 +++ b/doc/README.ext4 @@ -1,15 +1,28 @@ This patch series adds support for ext4 ls,load and write features in uboot Journaling is supported for write feature. +To enable support for the ext4 (and ext2) filesystem implementation, +#define CONFIG_FS_EXT4 + +If you want write support, +#define CONFIG_EXT4_WRITE + To Enable ext2 ls and load commands, modify the board specific config file with #define CONFIG_CMD_EXT2 +This automatically defines CONFIG_FS_EXT4 for you. To Enable ext4 ls and load commands, modify the board specific config file with #define CONFIG_CMD_EXT4 +This automatically defines CONFIG_FS_EXT4 for you. To enable ext4 write command, modify the board specific config file with #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE +These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you. + +Also relevant are the generic filesystem commands, +#define CONFIG_CMD_FS_GENERIC +This does not automatically enable EXT4 support for you. Steps to test: diff --git a/doc/README.scrapyard b/doc/README.scrapyard index ed779e245f..2b868e6515 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,12 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de> +c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de> +ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de> +IAD210 powerpc mpc860 - - - +LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de> +SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> SX1 arm arm925t - - TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> diff --git a/doc/git-mailrc b/doc/git-mailrc index 7f60ef134a..6600c150dc 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -30,6 +30,7 @@ alias rbohmer Remy Bohmer <linux@bohmer.net> alias reinhardm Reinhard Meyer <u-boot@emk-elektronik.de> alias sbabic Stefano Babic <sbabic@denx.de> alias scottwood Scott Wood <scottwood@freescale.com> +alias sjg Simon Glass <sjg@chromium.org> alias smcnutt Scott McNutt <smcnutt@psyent.com> alias stroese Stefan Roese <sr@denx.de> alias vapier Mike Frysinger <vapier@gentoo.org> @@ -50,7 +51,7 @@ alias rmobile uboot, iwamatsu alias s3c samsung alias s5pc samsung alias samsung uboot, prom -alias tegra uboot, Simon Glass <sjg@chromium.org>, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> +alias tegra uboot, sjg, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> alias tegra2 tegra alias ti uboot, Tom Rini <trini@ti.com> @@ -84,7 +85,7 @@ alias ppc4xx uboot, stroese alias ppc7xx uboot, wd alias ppc74xx uboot, wd -alias sandbox Simon Glass <sjg@chromium.org> +alias sandbox sjg alias sb sandbox alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com> @@ -92,7 +93,7 @@ alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com> alias superh uboot, iwamatsu alias sh superh -alias x86 uboot, gruss +alias x86 uboot, sjg, gruss # Subsystem aliases alias cfi uboot, stroese diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 7b2ec505e1..8c785ae923 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -37,11 +37,28 @@ #include <linux/ctype.h> #include <ahci.h> +static int ata_io_flush(u8 port); + struct ahci_probe_ent *probe_ent = NULL; hd_driveid_t *ataid[AHCI_MAX_PORTS]; #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) +/* + * Some controllers limit number of blocks they can read/write at once. + * Contemporary SSD devices work much faster if the read/write size is aligned + * to a power of 2. Let's set default to 128 and allowing to be overwritten if + * needed. + */ +#ifndef MAX_SATA_BLOCKS_READ_WRITE +#define MAX_SATA_BLOCKS_READ_WRITE 0x80 +#endif + +/* Maximum timeouts for each event */ +#define WAIT_MS_SPINUP 10000 +#define WAIT_MS_DATAIO 5000 +#define WAIT_MS_FLUSH 5000 +#define WAIT_MS_LINKUP 4 static inline u32 ahci_port_base(u32 base, u32 port) { @@ -60,7 +77,39 @@ static void ahci_setup_port(struct ahci_ioports *port, unsigned long base, #define msleep(a) udelay(a * 1000) -#define ssleep(a) msleep(a * 1000) + +static void ahci_dcache_flush_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end); + flush_dcache_range(start, end); +} + +/* + * SATA controller DMAs to physical RAM. Ensure data from the + * controller is invalidated from dcache; next access comes from + * physical RAM. + */ +static void ahci_dcache_invalidate_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end); + invalidate_dcache_range(start, end); +} + +/* + * Ensure data for SATA controller is flushed out of dcache and + * written to physical memory. + */ +static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp) +{ + ahci_dcache_flush_range((unsigned long)pp->cmd_slot, + AHCI_PORT_PRIV_DMA_SZ); +} static int waiting_for_cmd_completed(volatile u8 *offset, int timeout_msec, @@ -84,13 +133,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) unsigned short vendor; #endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; - u32 tmp, cap_save; + u32 tmp, cap_save, cmd; int i, j; volatile u8 *port_mmio; + debug("ahci_host_init: start\n"); + cap_save = readl(mmio + HOST_CAP); cap_save &= ((1 << 28) | (1 << 17)); - cap_save |= (1 << 27); + cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */ /* global controller reset */ tmp = readl(mmio + HOST_CTL); @@ -100,13 +151,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* reset must complete within 1 second, or * the hardware should be considered fried. */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - debug("controller reset failed (0x%x)\n", tmp); - return -1; - } + i = 1000; + do { + udelay(1000); + tmp = readl(mmio + HOST_CTL); + if (!i--) { + debug("controller reset failed (0x%x)\n", tmp); + return -1; + } + } while (tmp & HOST_RESET); writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL); writel(cap_save, mmio + HOST_CAP); @@ -129,6 +182,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) debug("cap 0x%x port_map 0x%x n_ports %d\n", probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID) + probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID; + for (i = 0; i < probe_ent->n_ports; i++) { probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i); port_mmio = (u8 *) probe_ent->port[i].port_mmio; @@ -138,6 +194,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp = readl(port_mmio + PORT_CMD); if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | PORT_CMD_FIS_RX | PORT_CMD_START)) { + debug("Port %d is active. Deactivating.\n", i); tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | PORT_CMD_FIS_RX | PORT_CMD_START); writel_with_flush(tmp, port_mmio + PORT_CMD); @@ -148,16 +205,53 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) msleep(500); } - writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); - + /* Add the spinup command to whatever mode bits may + * already be on in the command register. + */ + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_FIS_RX; + cmd |= PORT_CMD_SPIN_UP; + writel_with_flush(cmd, port_mmio + PORT_CMD); + + /* Bring up SATA link. + * SATA link bringup time is usually less than 1 ms; only very + * rarely has it taken between 1-2 ms. Never seen it above 2 ms. + */ j = 0; - while (j < 100) { - msleep(10); + while (j < WAIT_MS_LINKUP) { tmp = readl(port_mmio + PORT_SCR_STAT); if ((tmp & 0xf) == 0x3) break; + udelay(1000); j++; } + if (j == WAIT_MS_LINKUP) { + printf("SATA link %d timeout.\n", i); + continue; + } else { + debug("SATA link ok.\n"); + } + + /* Clear error status */ + tmp = readl(port_mmio + PORT_SCR_ERR); + if (tmp) + writel(tmp, port_mmio + PORT_SCR_ERR); + + debug("Spinning up device on SATA port %d... ", i); + + j = 0; + while (j < WAIT_MS_SPINUP) { + tmp = readl(port_mmio + PORT_TFDATA); + if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ))) + break; + udelay(1000); + j++; + } + printf("Target spinup took %d ms.\n", j); + if (j == WAIT_MS_SPINUP) + debug("timeout.\n"); + else + debug("ok.\n"); tmp = readl(port_mmio + PORT_SCR_ERR); debug("PORT_SCR_ERR 0x%x\n", tmp); @@ -174,9 +268,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* set irq mask (enables interrupts) */ writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); - /*register linkup ports */ + /* register linkup ports */ tmp = readl(port_mmio + PORT_SCR_STAT); - debug("Port %d status: 0x%x\n", i, tmp); + debug("SATA port %d status: 0x%x\n", i, tmp); if ((tmp & 0xf) == 0x03) probe_ent->link_port_map |= (0x01 << i); } @@ -202,12 +296,13 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) u16 cc; #endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; - u32 vers, cap, impl, speed; + u32 vers, cap, cap2, impl, speed; const char *speed_s; const char *scc_s; vers = readl(mmio + HOST_VERSION); cap = probe_ent->cap; + cap2 = readl(mmio + HOST_CAP2); impl = probe_ent->port_map; speed = (cap >> 20) & 0xf; @@ -215,6 +310,8 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) speed_s = "1.5"; else if (speed == 2) speed_s = "3"; + else if (speed == 3) + speed_s = "6"; else speed_s = "?"; @@ -240,8 +337,9 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s); printf("flags: " - "%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n", + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s\n", cap & (1 << 31) ? "64bit " : "", cap & (1 << 30) ? "ncq " : "", cap & (1 << 28) ? "ilck " : "", @@ -252,9 +350,16 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) cap & (1 << 19) ? "nz " : "", cap & (1 << 18) ? "only " : "", cap & (1 << 17) ? "pmp " : "", + cap & (1 << 16) ? "fbss " : "", cap & (1 << 15) ? "pio " : "", cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : ""); + cap & (1 << 13) ? "part " : "", + cap & (1 << 7) ? "ccc " : "", + cap & (1 << 6) ? "ems " : "", + cap & (1 << 5) ? "sxs " : "", + cap2 & (1 << 2) ? "apst " : "", + cap2 & (1 << 1) ? "nvmp " : "", + cap2 & (1 << 0) ? "boh " : ""); } #ifndef CONFIG_SCSI_AHCI_PLAT @@ -277,8 +382,8 @@ static int ahci_init_one(pci_dev_t pdev) probe_ent->pio_mask = 0x1f; probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ - probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR, - PCI_REGION_MEM); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base); + debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base); /* Take from kernel: * JMicron-specific fixup: @@ -342,6 +447,7 @@ static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts) } +#ifdef CONFIG_AHCI_SETFEATURES_XFER static void ahci_set_feature(u8 port) { struct ahci_ioports *pp = &(probe_ent->port[port]); @@ -349,23 +455,26 @@ static void ahci_set_feature(u8 port) u32 cmd_fis_len = 5; /* five dwords */ u8 fis[20]; - /*set feature */ - memset(fis, 0, 20); + /* set feature */ + memset(fis, 0, sizeof(fis)); fis[0] = 0x27; fis[1] = 1 << 7; fis[2] = ATA_CMD_SETF; fis[3] = SETFEATURES_XFER; fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01; - memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis)); ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_dcache_flush_sata_cmd(pp); writel(1, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); - if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) { - printf("set feature error!\n"); + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { + printf("set feature error on port %d!\n", port); } } +#endif static int ahci_port_start(u8 port) @@ -397,25 +506,27 @@ static int ahci_port_start(u8 port) * First item in chunk of DMA memory: 32-slot command table, * 32 bytes each in size */ - pp->cmd_slot = (struct ahci_cmd_hdr *)mem; - debug("cmd_slot = %p\n", pp->cmd_slot); + pp->cmd_slot = + (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem); + debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot); mem += (AHCI_CMD_SLOT_SZ + 224); /* * Second item: Received-FIS area */ - pp->rx_fis = mem; + pp->rx_fis = virt_to_phys((void *)mem); mem += AHCI_RX_FIS_SZ; /* * Third item: data area for storing a single command * and its scatter-gather table */ - pp->cmd_tbl = mem; + pp->cmd_tbl = virt_to_phys((void *)mem); debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl); mem += AHCI_CMD_TBL_HDR; - pp->cmd_tbl_sg = (struct ahci_sg *)mem; + pp->cmd_tbl_sg = + (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem); writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR); @@ -431,8 +542,8 @@ static int ahci_port_start(u8 port) } -static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, - int buf_len) +static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf, + int buf_len, u8 is_write) { struct ahci_ioports *pp = &(probe_ent->port[port]); @@ -441,10 +552,10 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, u32 port_status; int sg_count; - debug("Enter get_ahci_device_data: for port %d\n", port); + debug("Enter %s: for port %d\n", __func__, port); if (port > probe_ent->n_ports) { - printf("Invaild port number %d\n", port); + printf("Invalid port number %d\n", port); return -1; } @@ -457,17 +568,22 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len); sg_count = ahci_fill_sg(port, buf, buf_len); - opts = (fis_len >> 2) | (sg_count << 16); + opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6); ahci_fill_cmd_slot(pp, opts); + ahci_dcache_flush_sata_cmd(pp); + ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); - if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) { + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { printf("timeout exit!\n"); return -1; } - debug("get_ahci_device_data: %d byte transferred.\n", - pp->cmd_slot->status); + + ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len); + debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status); return 0; } @@ -526,7 +642,7 @@ static int ata_scsiop_inquiry(ccb *pccb) if (pccb->datalen <= 35) return 0; - memset(fis, 0, 20); + memset(fis, 0, sizeof(fis)); /* Construct the FIS */ fis[0] = 0x27; /* Host to device FIS. */ fis[1] = 1 << 7; /* Command FIS. */ @@ -537,8 +653,8 @@ static int ata_scsiop_inquiry(ccb *pccb) if (!(tmpid = malloc(sizeof(hd_driveid_t)))) return -ENOMEM; - if (get_ahci_device_data(port, (u8 *) & fis, 20, - tmpid, sizeof(hd_driveid_t))) { + if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), tmpid, + sizeof(hd_driveid_t), 0)) { debug("scsi_ahci: SCSI inquiry command failure.\n"); return -EIO; } @@ -557,46 +673,91 @@ static int ata_scsiop_inquiry(ccb *pccb) /* - * SCSI READ10 command operation. + * SCSI READ10/WRITE10 command operation. */ -static int ata_scsiop_read10(ccb * pccb) +static int ata_scsiop_read_write(ccb *pccb, u8 is_write) { - u32 len = 0; + u32 lba = 0; + u16 blocks = 0; u8 fis[20]; + u8 *user_buffer = pccb->pdata; + u32 user_buffer_size = pccb->datalen; - len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]); + /* Retrieve the base LBA number from the ccb structure. */ + memcpy(&lba, pccb->cmd + 2, sizeof(lba)); + lba = be32_to_cpu(lba); - /* For 10-byte and 16-byte SCSI R/W commands, transfer + /* + * And the number of blocks. + * + * For 10-byte and 16-byte SCSI R/W commands, transfer * length 0 means transfer 0 block of data. * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. * * WARNING: one or two older ATA drives treat 0 as 0... */ - if (!len) - return 0; - memset(fis, 0, 20); + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); - /* Construct the FIS */ - fis[0] = 0x27; /* Host to device FIS. */ - fis[1] = 1 << 7; /* Command FIS. */ - fis[2] = ATA_CMD_RD_DMA; /* Command byte. */ - - /* LBA address, only support LBA28 in this driver */ - fis[4] = pccb->cmd[5]; - fis[5] = pccb->cmd[4]; - fis[6] = pccb->cmd[3]; - fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0; - - /* Sector Count */ - fis[12] = pccb->cmd[8]; - fis[13] = pccb->cmd[7]; - - /* Read from ahci */ - if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20, - pccb->pdata, pccb->datalen)) { - debug("scsi_ahci: SCSI READ10 command failure.\n"); - return -EIO; + debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n", + is_write ? "write" : "read", (unsigned)lba, blocks); + + /* Preset the FIS */ + memset(fis, 0, sizeof(fis)); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + /* Command byte (read/write). */ + fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + while (blocks) { + u16 now_blocks; /* number of blocks per iteration */ + u32 transfer_size; /* number of bytes per iteration */ + + now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks); + + transfer_size = ATA_BLOCKSIZE * now_blocks; + if (transfer_size > user_buffer_size) { + printf("scsi_ahci: Error: buffer too small.\n"); + return -EIO; + } + + /* LBA48 SATA command but only use 32bit address range within + * that. The next smaller command range (28bit) is too small. + */ + fis[4] = (lba >> 0) & 0xff; + fis[5] = (lba >> 8) & 0xff; + fis[6] = (lba >> 16) & 0xff; + fis[7] = 1 << 6; /* device reg: set LBA mode */ + fis[8] = ((lba >> 24) & 0xff); + fis[3] = 0xe0; /* features */ + + /* Block (sector) count */ + fis[12] = (now_blocks >> 0) & 0xff; + fis[13] = (now_blocks >> 8) & 0xff; + + /* Read/Write from ahci */ + if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, user_buffer_size, + is_write)) { + debug("scsi_ahci: SCSI %s10 command failure.\n", + is_write ? "WRITE" : "READ"); + return -EIO; + } + + /* If this transaction is a write, do a following flush. + * Writes in u-boot are so rare, and the logic to know when is + * the last write and do a flush only there is sufficiently + * difficult. Just do a flush after every write. This incurs, + * usually, one extra flush when the rare writes do happen. + */ + if (is_write) { + if (-EIO == ata_io_flush(pccb->target)) + return -EIO; + } + user_buffer += transfer_size; + user_buffer_size -= transfer_size; + blocks -= now_blocks; + lba += now_blocks; } return 0; @@ -609,6 +770,7 @@ static int ata_scsiop_read10(ccb * pccb) static int ata_scsiop_read_capacity10(ccb *pccb) { u32 cap; + u32 block_size; if (!ataid[pccb->target]) { printf("scsi_ahci: SCSI READ CAPACITY10 command failure. " @@ -618,11 +780,52 @@ static int ata_scsiop_read_capacity10(ccb *pccb) } cap = le32_to_cpu(ataid[pccb->target]->lba_capacity); + if (cap == 0xfffffff) { + unsigned short *cap48 = ataid[pccb->target]->lba48_capacity; + if (cap48[2] || cap48[3]) { + cap = 0xffffffff; + } else { + cap = (le16_to_cpu(cap48[1]) << 16) | + (le16_to_cpu(cap48[0])); + } + } + + cap = cpu_to_be32(cap); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be32((u32)512); + memcpy(&pccb->pdata[4], &block_size, 4); + + return 0; +} + + +/* + * SCSI READ CAPACITY16 command operation. + */ +static int ata_scsiop_read_capacity16(ccb *pccb) +{ + u64 cap; + u64 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY16 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI commmand INQUIRY firstly!\n"); + return -EPERM; + } + + cap = le32_to_cpu(ataid[pccb->target]->lba_capacity); + if (cap == 0xfffffff) { + memcpy(&cap, ataid[pccb->target]->lba48_capacity, sizeof(cap)); + cap = le64_to_cpu(cap); + } + + cap = cpu_to_be64(cap); memcpy(pccb->pdata, &cap, sizeof(cap)); - pccb->pdata[4] = pccb->pdata[5] = 0; - pccb->pdata[6] = 512 >> 8; - pccb->pdata[7] = 512 & 0xff; + block_size = cpu_to_be64((u64)512); + memcpy(&pccb->pdata[8], &block_size, 8); return 0; } @@ -643,11 +846,17 @@ int scsi_exec(ccb *pccb) switch (pccb->cmd[0]) { case SCSI_READ10: - ret = ata_scsiop_read10(pccb); + ret = ata_scsiop_read_write(pccb, 0); break; - case SCSI_RD_CAPAC: + case SCSI_WRITE10: + ret = ata_scsiop_read_write(pccb, 1); + break; + case SCSI_RD_CAPAC10: ret = ata_scsiop_read_capacity10(pccb); break; + case SCSI_RD_CAPAC16: + ret = ata_scsiop_read_capacity16(pccb); + break; case SCSI_TST_U_RDY: ret = ata_scsiop_test_unit_ready(pccb); break; @@ -685,7 +894,9 @@ void scsi_low_level_init(int busdevfunc) printf("Can not start port %d\n", i); continue; } +#ifdef CONFIG_AHCI_SETFEATURES_XFER ahci_set_feature((u8) i); +#endif } } } @@ -726,7 +937,9 @@ int ahci_init(u32 base) printf("Can not start port %d\n", i); continue; } +#ifdef CONFIG_AHCI_SETFEATURES_XFER ahci_set_feature((u8) i); +#endif } } err_out: @@ -734,6 +947,42 @@ err_out: } #endif +/* + * In the general case of generic rotating media it makes sense to have a + * flush capability. It probably even makes sense in the case of SSDs because + * one cannot always know for sure what kind of internal cache/flush mechanism + * is embodied therein. At first it was planned to invoke this after the last + * write to disk and before rebooting. In practice, knowing, a priori, which + * is the last write is difficult. Because writing to the disk in u-boot is + * very rare, this flush command will be invoked after every block write. + */ +static int ata_io_flush(u8 port) +{ + u8 fis[20]; + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + + /* Preset the FIS */ + memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_FLUSH_EXT; + + memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + ahci_fill_cmd_slot(pp, cmd_fis_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_FLUSH, 0x1)) { + debug("scsi_ahci: flush command timeout on port %d.\n", port); + return -EIO; + } + + return 0; +} + + void scsi_bus_reset(void) { /*Not implement*/ diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c index fda3389e8b..1f9d7b097c 100644 --- a/drivers/block/fsl_sata.c +++ b/drivers/block/fsl_sata.c @@ -56,25 +56,6 @@ static inline void sdelay(unsigned long sec) mdelay(1000); } -void dprint_buffer(unsigned char *buf, int len) -{ - int i, j; - - i = 0; - j = 0; - printf("\n\r"); - - for (i = 0; i < len; i++) { - printf("%02x ", *buf++); - j++; - if (j == 16) { - printf("\n\r"); - j = 0; - } - } - printf("\n\r"); -} - static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) { printf("Status FIS dump:\n\r"); @@ -94,7 +75,7 @@ static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) printf("sector_count_exp: %02x\n\r", s->sector_count_exp); } -static int ata_wait_register(volatile unsigned *addr, u32 mask, +static int ata_wait_register(unsigned __iomem *addr, u32 mask, u32 val, u32 timeout_msec) { int i; @@ -112,7 +93,7 @@ int init_sata(int dev) cmd_hdr_tbl_t *cmd_hdr; u32 cda; u32 val32; - fsl_sata_reg_t *reg; + fsl_sata_reg_t __iomem *reg; u32 sig; int i; fsl_sata_t *sata; @@ -287,42 +268,7 @@ int init_sata(int dev) return 0; } -/* Hardware reset, like Power-on and COMRESET */ -void fsl_sata_hardware_reset(u32 reg_base) -{ - fsl_sata_reg_t *reg = (fsl_sata_reg_t *)reg_base; - u32 scontrol; - - /* Disable the SATA interface and put PHY offline */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x304; - out_le32(®->scontrol, scontrol); - - /* No speed strict */ - scontrol = in_le32(®->scontrol); - scontrol = scontrol & ~0x0f0; - out_le32(®->scontrol, scontrol); - - /* Issue PHY wake/reset, Hardware_reset_asserted */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x301; - out_le32(®->scontrol, scontrol); - - mdelay(100); - - /* Resume PHY, COMRESET negated, the device initialize hardware - * and execute diagnostics, send good status-signature to host, - * which is D2H register FIS, and then the device enter idle state. - */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x300; - out_le32(®->scontrol, scontrol); - - mdelay(100); - return; -} - -static void fsl_sata_dump_regs(fsl_sata_reg_t *reg) +static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg) { printf("\n\rSATA: %08x\n\r", (u32)reg); printf("CQR: %08x\n\r", in_le32(®->cqr)); @@ -363,7 +309,7 @@ static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis u32 prde_count; u32 val32; u32 ttl; - fsl_sata_reg_t *reg = sata->reg_base; + fsl_sata_reg_t __iomem *reg = sata->reg_base; int i; /* Check xfer length */ @@ -620,7 +566,7 @@ static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_wr return blkcnt; } -void fsl_sata_flush_cache(int dev) +static void fsl_sata_flush_cache(int dev) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -664,7 +610,8 @@ static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int i return blkcnt; } -u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) +static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, + int is_write) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -707,7 +654,7 @@ u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write return blkcnt; } -void fsl_sata_flush_cache_ext(int dev) +static void fsl_sata_flush_cache_ext(int dev) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -721,12 +668,6 @@ void fsl_sata_flush_cache_ext(int dev) fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); } -/* Software reset, set SRST of the Device Control register */ -void fsl_sata_software_reset(int dev) -{ - return; -} - static void fsl_sata_init_wcache(int dev, u16 *id) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; @@ -757,7 +698,7 @@ static int fsl_sata_get_flush_ext(int dev) return sata->flush_ext; } -u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, +static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, const void *buffer, int is_write) { u32 start, blks; @@ -792,8 +733,8 @@ u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, return blkcnt; } -u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, const void *buffer, - int is_write) +static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, + const void *buffer, int is_write) { u32 start, blks; u8 *addr; diff --git a/drivers/block/fsl_sata.h b/drivers/block/fsl_sata.h index cecff68da3..a9c27bc868 100644 --- a/drivers/block/fsl_sata.h +++ b/drivers/block/fsl_sata.h @@ -176,10 +176,11 @@ typedef struct fsl_sata_reg { * Command Header Entry */ typedef struct cmd_hdr_entry { - u32 cda; /* Command Descriptor Address, 4 bytes aligned */ - u32 prde_fis_len; /* Number of PRD entries and FIS length */ - u32 ttl; /* Total transfer length */ - u32 attribute; /* the attribute of command */ + __le32 cda; /* Command Descriptor Address, + 4 bytes aligned */ + __le32 prde_fis_len; /* Number of PRD entries and FIS length */ + __le32 ttl; /* Total transfer length */ + __le32 attribute; /* the attribute of command */ } __attribute__ ((packed)) cmd_hdr_entry_t; #define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry) @@ -230,10 +231,10 @@ typedef struct cmd_hdr_tbl { * PRD entry - Physical Region Descriptor entry */ typedef struct prd_entry { - u32 dba; /* Data base address, 4 bytes aligned */ + __le32 dba; /* Data base address, 4 bytes aligned */ u32 res1; u32 res2; - u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ + __le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ } __attribute__ ((packed)) prd_entry_t; #define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry) diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c index 245b872f99..b70f04de8b 100644 --- a/drivers/block/sata_sil.c +++ b/drivers/block/sata_sil.c @@ -27,6 +27,7 @@ #include <fis.h> #include <sata.h> #include <libata.h> +#include <sata.h> #include "sata_sil.h" /* Convert sectorsize to wordsize */ @@ -369,8 +370,8 @@ static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt, return blkcnt; } -ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, - const void *buffer, int is_write) +static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) { ulong start, blks, max_blks; u8 *addr; @@ -397,8 +398,8 @@ ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, return blkcnt; } -ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, - const void *buffer, int is_write) +static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) { ulong start, blks, max_blks; u8 *addr; @@ -427,7 +428,7 @@ ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, return blkcnt; } -void sil_sata_cmd_flush_cache(int dev) +static void sil_sata_cmd_flush_cache(int dev) { struct sil_cmd_block cmdb, *pcmd = &cmdb; @@ -439,7 +440,7 @@ void sil_sata_cmd_flush_cache(int dev) sil_exec_cmd(dev, pcmd, 0); } -void sil_sata_cmd_flush_cache_ext(int dev) +static void sil_sata_cmd_flush_cache_ext(int dev) { struct sil_cmd_block cmdb, *pcmd = &cmdb; diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index 26494a3f89..0773e731eb 100644 --- a/drivers/fpga/cyclon2.c +++ b/drivers/fpga/cyclon2.c @@ -144,6 +144,8 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ + (*fn->config) (FALSE, TRUE, cookie); /* De-assert nCONFIG */ + udelay(100); (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ udelay(2); /* T_cfg > 2us */ diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c index a9afcb2dd6..e167852b83 100644 --- a/drivers/gpio/mpc83xx_gpio.c +++ b/drivers/gpio/mpc83xx_gpio.c @@ -163,7 +163,7 @@ int gpio_set_value(unsigned gpio, int value) } /* Configure GPIO registers early */ -void mpc83xx_gpio_init_f() +void mpc83xx_gpio_init_f(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -187,7 +187,7 @@ void mpc83xx_gpio_init_f() } /* Initialize GPIO soft-copies */ -void mpc83xx_gpio_init_r() +void mpc83xx_gpio_init_r(void) { #if MPC83XX_GPIO_CTRLRS >= 1 gpio_output_value[0] = CONFIG_MPC83XX_GPIO_0_INIT_VALUE; diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 5b017a910c..3cb232fdd1 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -214,7 +214,7 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, return speed; } -unsigned int get_i2c_clock(int bus) +static unsigned int get_i2c_clock(int bus) { if (bus) return gd->i2c2_clk; /* I2C2 clock */ diff --git a/drivers/input/input.c b/drivers/input/input.c index 98006679b3..04fa5f0bd2 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -110,7 +110,7 @@ static struct { /* Maximum number of output characters that an ANSI sequence expands to */ #define ANSI_CHAR_MAX 3 -int input_queue_ascii(struct input_config *config, int ch) +static int input_queue_ascii(struct input_config *config, int ch) { if (config->fifo_in + 1 == INPUT_BUFFER_LEN) { if (!config->fifo_out) diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index aa6a9f13ea..e93e38ac43 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -68,7 +68,7 @@ struct fsl_esdhc { }; /* Return the XFERTYP flags for a given command and data packet */ -uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) +static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) { uint xfertyp = 0; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 5fbf956302..5ffd8c59e6 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -47,7 +47,8 @@ int __board_mmc_getcd(struct mmc *mmc) { int board_mmc_getcd(struct mmc *mmc)__attribute__((weak, alias("__board_mmc_getcd"))); -int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) { struct mmc_data backup; int ret; @@ -108,7 +109,7 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) return ret; } -int mmc_send_status(struct mmc *mmc, int timeout) +static int mmc_send_status(struct mmc *mmc, int timeout) { struct mmc_cmd cmd; int err, retries = 5; @@ -152,7 +153,7 @@ int mmc_send_status(struct mmc *mmc, int timeout) return 0; } -int mmc_set_blocklen(struct mmc *mmc, int len) +static int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; @@ -345,7 +346,8 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) return blkcnt; } -int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) +static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, + lbaint_t blkcnt) { struct mmc_cmd cmd; struct mmc_data data; @@ -415,7 +417,7 @@ static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst) return blkcnt; } -int mmc_go_idle(struct mmc* mmc) +static int mmc_go_idle(struct mmc *mmc) { struct mmc_cmd cmd; int err; @@ -436,8 +438,7 @@ int mmc_go_idle(struct mmc* mmc) return 0; } -int -sd_send_op_cond(struct mmc *mmc) +static int sd_send_op_cond(struct mmc *mmc) { int timeout = 1000; int err; @@ -502,7 +503,7 @@ sd_send_op_cond(struct mmc *mmc) return 0; } -int mmc_send_op_cond(struct mmc *mmc) +static int mmc_send_op_cond(struct mmc *mmc) { int timeout = 10000; struct mmc_cmd cmd; @@ -566,7 +567,7 @@ int mmc_send_op_cond(struct mmc *mmc) } -int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) +static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) { struct mmc_cmd cmd; struct mmc_data data; @@ -588,7 +589,7 @@ int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) } -int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) +static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) { struct mmc_cmd cmd; int timeout = 1000; @@ -610,7 +611,7 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) } -int mmc_change_freq(struct mmc *mmc) +static int mmc_change_freq(struct mmc *mmc) { ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); char cardtype; @@ -680,7 +681,7 @@ int mmc_getcd(struct mmc *mmc) return cd; } -int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) +static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) { struct mmc_cmd cmd; struct mmc_data data; @@ -701,7 +702,7 @@ int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) } -int sd_change_freq(struct mmc *mmc) +static int sd_change_freq(struct mmc *mmc) { int err; struct mmc_cmd cmd; @@ -840,7 +841,7 @@ static const int multipliers[] = { 80, }; -void mmc_set_ios(struct mmc *mmc) +static void mmc_set_ios(struct mmc *mmc) { mmc->set_ios(mmc); } @@ -858,14 +859,14 @@ void mmc_set_clock(struct mmc *mmc, uint clock) mmc_set_ios(mmc); } -void mmc_set_bus_width(struct mmc *mmc, uint width) +static void mmc_set_bus_width(struct mmc *mmc, uint width) { mmc->bus_width = width; mmc_set_ios(mmc); } -int mmc_startup(struct mmc *mmc) +static int mmc_startup(struct mmc *mmc) { int err, width; uint mult, freq; @@ -1013,7 +1014,7 @@ int mmc_startup(struct mmc *mmc) if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { /* check ext_csd version and capacity */ err = mmc_send_ext_csd(mmc, ext_csd); - if (!err & (ext_csd[EXT_CSD_REV] >= 2)) { + if (!err && (ext_csd[EXT_CSD_REV] >= 2)) { /* * According to the JEDEC Standard, the value of * ext_csd's capacity is valid if the value is more @@ -1148,7 +1149,7 @@ int mmc_startup(struct mmc *mmc) return 0; } -int mmc_send_if_cond(struct mmc *mmc) +static int mmc_send_if_cond(struct mmc *mmc) { struct mmc_cmd cmd; int err; diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 43140f3647..b2dfc5369d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -752,8 +752,8 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) */ static flash_sect_t find_sector (flash_info_t * info, ulong addr) { - static flash_sect_t saved_sector = 0; /* previously found sector */ - static flash_info_t *saved_info = 0; /* previously used flash bank */ + static flash_sect_t saved_sector; /* previously found sector */ + static flash_info_t *saved_info; /* previously used flash bank */ flash_sect_t sector = saved_sector; if ((info != saved_info) || (sector >= info->sector_count)) @@ -1147,8 +1147,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) } if (use_flash_status_poll(info)) { - cfiword_t cword = (cfiword_t)0xffffffffffffffffULL; + cfiword_t cword; void *dest; + cword.ll = 0xffffffffffffffffULL; dest = flash_map(info, sect, 0); st = flash_status_poll(info, &cword, dest, info->erase_blk_tout, "erase"); @@ -1430,8 +1431,8 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) { - if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) && - (info->device_id == NUMONYX_256MBIT)) { + if (info->manufacturer_id == ((INTEL_MANUFACT & FLASH_VENDMASK) >> 16) + && info->device_id == NUMONYX_256MBIT) { /* * see errata called * "Numonyx Axcell P33/P30 Specification Update" :) @@ -1487,7 +1488,8 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) case CFI_CMDSET_AMD_EXTENDED: case CFI_CMDSET_AMD_STANDARD: /* U-Boot only checks the first byte */ - if (info->manufacturer_id == (uchar)ATM_MANUFACT) { + if (info->manufacturer_id == + ((ATM_MANUFACT & FLASH_VENDMASK) >> 16)) { if (prot) { flash_unlock_seq (info, 0); flash_write_cmd (info, 0, @@ -1505,7 +1507,8 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) 0, ATM_CMD_UNLOCK_SECT); } } - if (info->manufacturer_id == (uchar)AMD_MANUFACT) { + if (info->manufacturer_id == + ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) { int flag = disable_interrupts(); int lock_flag; @@ -1735,7 +1738,8 @@ static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); #ifdef CONFIG_SYS_FLASH_PROTECTION - if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) { + if (info->ext_addr && info->manufacturer_id == + ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) { ushort spus; /* read sector protect/unprotect scheme */ @@ -1854,7 +1858,7 @@ static void flash_read_cfi (flash_info_t *info, void *buf, p[i] = flash_read_uchar(info, start + i); } -void __flash_cmd_reset(flash_info_t *info) +static void __flash_cmd_reset(flash_info_t *info) { /* * We do not yet know what kind of commandset to use, so we issue diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 71f5027889..d3b71a50ad 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2601,6 +2601,7 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, int *maf_id, int *dev_id, const struct nand_flash_dev *type) { + const char *name; int i, maf_idx; u8 id_data[8]; int ret; @@ -2848,14 +2849,14 @@ ident_done: chip->cmdfunc = nand_command_lp; /* TODO onfi flash name */ - MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, - nand_manuf_ids[maf_idx].name, + name = type->name; #ifdef CONFIG_SYS_NAND_ONFI_DETECTION - chip->onfi_version ? chip->onfi_params.model : type->name); -#else - type->name); + if (chip->onfi_version) + name = chip->onfi_params.model; #endif + MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, + nand_manuf_ids[maf_idx].name, name); return type; } diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 81f0e0812b..097cf625b8 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -39,6 +39,7 @@ #include <asm/errno.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand_ecc.h> /* The PPC4xx NDFC uses Smart Media (SMC) bytes order */ #ifdef CONFIG_NAND_NDFC diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c index a7e26b0456..ab439b3e20 100644 --- a/drivers/mtd/ubi/crc32.c +++ b/drivers/mtd/ubi/crc32.c @@ -38,17 +38,9 @@ #include "crc32defs.h" #define CRC_LE_BITS 8 -# define __force -#ifndef __constant_cpu_to_le32 -#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) -#endif -#ifndef __constant_le32_to_cpu -#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) -#endif - #if CRC_LE_BITS == 8 -#define tole(x) __constant_cpu_to_le32(x) -#define tobe(x) __constant_cpu_to_be32(x) +#define tole(x) cpu_to_le32(x) +#define tobe(x) cpu_to_be32(x) #else #define tole(x) (x) #define tobe(x) (x) diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 82c787bf38..54b142f47d 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -46,7 +46,7 @@ static int num_controllers; TBICR_FULL_DUPLEX | TBICR_SPEED1_SET) /* Configure the TBI for SGMII operation */ -void dtsec_configure_serdes(struct fm_eth *priv) +static void dtsec_configure_serdes(struct fm_eth *priv) { #ifdef CONFIG_SYS_FMAN_V3 u32 value; diff --git a/drivers/net/fm/p1023.c b/drivers/net/fm/p1023.c index 9765da5b23..387d2a382d 100644 --- a/drivers/net/fm/p1023.c +++ b/drivers/net/fm/p1023.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1, [FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2, }; diff --git a/drivers/net/fm/p4080.c b/drivers/net/fm/p4080.c index 9dc6049c36..b04fd0f656 100644 --- a/drivers/net/fm/p4080.c +++ b/drivers/net/fm/p4080.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, diff --git a/drivers/net/fm/p5020.c b/drivers/net/fm/p5020.c index a7a6e43fe2..5391044833 100644 --- a/drivers/net/fm/p5020.c +++ b/drivers/net/fm/p5020.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, diff --git a/drivers/net/fm/tgec_phy.c b/drivers/net/fm/tgec_phy.c index 2d349ad037..2be69d7162 100644 --- a/drivers/net/fm/tgec_phy.c +++ b/drivers/net/fm/tgec_phy.c @@ -30,8 +30,8 @@ * until the write is done before it returns. All PHY configuration has to be * done through the TSEC1 MIIM regs */ -int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, - int regnum, u16 value) +static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value) { u32 mdio_ctl; u32 stat_val; @@ -72,8 +72,8 @@ int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, * Clears miimcom first. All PHY configuration has to be done through the * TSEC1 MIIM regs */ -int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, - int regnum) +static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum) { u32 mdio_ctl; u32 stat_val; @@ -114,7 +114,7 @@ int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, return in_be32(®s->mdio_data) & 0xffff; } -int tgec_mdio_reset(struct mii_dev *bus) +static int tgec_mdio_reset(struct mii_dev *bus) { return 0; } diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 0e1ced71c5..8bacbda719 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -51,8 +51,6 @@ #include "macb.h" -#define barrier() asm volatile("" ::: "memory") - #define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096 #define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128) #define CONFIG_SYS_MACB_TX_RING_SIZE 16 diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 798473dd68..9b3808bfa9 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -30,7 +30,7 @@ static int ar8021_config(struct phy_device *phydev) return 0; } -struct phy_driver AR8021_driver = { +static struct phy_driver AR8021_driver = { .name = "AR8021", .uid = 0x4dd040, .mask = 0xfffff0, diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index baef60f827..1ffa791dce 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -43,7 +43,7 @@ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement * hasn't changed, and > 0 if it has changed. */ -int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int oldadv, adv; @@ -118,7 +118,7 @@ int genphy_config_advert(struct phy_device *phydev) * Description: Configures MII_BMCR to force speed/duplex * to the values in phydev. Assumes that the values are valid. */ -int genphy_setup_forced(struct phy_device *phydev) +static int genphy_setup_forced(struct phy_device *phydev) { int err; int ctl = 0; @@ -465,7 +465,7 @@ int phy_register(struct phy_driver *drv) return 0; } -int phy_probe(struct phy_device *phydev) +static int phy_probe(struct phy_device *phydev) { int err = 0; @@ -488,7 +488,7 @@ static struct phy_driver *generic_for_interface(phy_interface_t interface) return &genphy_driver; } -struct phy_driver *get_phy_driver(struct phy_device *phydev, +static struct phy_driver *get_phy_driver(struct phy_device *phydev, phy_interface_t interface) { struct list_head *entry; @@ -505,8 +505,9 @@ struct phy_driver *get_phy_driver(struct phy_device *phydev, return generic_for_interface(interface); } -struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, - phy_interface_t interface) +static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, + int phy_id, + phy_interface_t interface) { struct phy_device *dev; @@ -549,7 +550,7 @@ struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, * Description: Reads the ID registers of the PHY at @addr on the * @bus, stores it in @phy_id and returns zero on success. */ -int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; @@ -581,8 +582,8 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) * Description: Reads the ID registers of the PHY at @addr on the * @bus, then allocates and returns the phy_device to represent it. */ -struct phy_device *get_phy_device(struct mii_dev *bus, int addr, - phy_interface_t interface) +static struct phy_device *get_phy_device(struct mii_dev *bus, int addr, + phy_interface_t interface) { u32 phy_id = 0x1fffffff; int i; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 0a0f40dbde..6c5cb99774 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -123,7 +123,7 @@ static int cis8204_config(struct phy_device *phydev) } /* Vitesse VSC8601 */ -int vsc8601_config(struct phy_device *phydev) +static int vsc8601_config(struct phy_device *phydev) { /* Configure some basic stuff */ #ifdef CONFIG_SYS_VSC8601_SKEWFIX diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index 6dc7ad52e4..1357edee6c 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -178,8 +178,6 @@ static void smc_phy_configure(struct eth_device *dev); * inx,outx functions fixed this problem. */ -#define barrier() __asm__ __volatile__("": : :"memory") - static inline word SMC_inw(struct eth_device *dev, dword offset) { word v; diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c index ada42c41f8..a5110e516d 100644 --- a/drivers/net/vsc7385.c +++ b/drivers/net/vsc7385.c @@ -16,6 +16,7 @@ #include <common.h> #include <asm/io.h> #include <asm/errno.h> +#include "vsc7385.h" /* * Upload a Vitesse VSC7385 firmware image to the hardware diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index ea8d734a9e..f53c2bf003 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -40,8 +40,6 @@ DECLARE_GLOBAL_DATA_PTR; #error "Bad: you didn't configure serial ..." #endif -#define barrier() asm volatile("" ::: "memory") - /* * The coefficient, used to calculate the baudrate on S3C6400 UARTs is * calculated as diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index 5fb38410a8..c1c0134bcb 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -92,21 +92,33 @@ static NS16550_t serial_ports[6] = { /* Multi serial device functions */ #define DECLARE_ESERIAL_FUNCTIONS(port) \ - int eserial##port##_init (void) {\ - int clock_divisor; \ - clock_divisor = calc_divisor(serial_ports[port-1]); \ - NS16550_init(serial_ports[port-1], clock_divisor); \ - return(0);}\ - void eserial##port##_setbrg (void) {\ - serial_setbrg_dev(port);}\ - int eserial##port##_getc (void) {\ - return serial_getc_dev(port);}\ - int eserial##port##_tstc (void) {\ - return serial_tstc_dev(port);}\ - void eserial##port##_putc (const char c) {\ - serial_putc_dev(port, c);}\ - void eserial##port##_puts (const char *s) {\ - serial_puts_dev(port, s);} + static int eserial##port##_init(void) \ + { \ + int clock_divisor; \ + clock_divisor = calc_divisor(serial_ports[port-1]); \ + NS16550_init(serial_ports[port-1], clock_divisor); \ + return 0 ; \ + } \ + static void eserial##port##_setbrg(void) \ + { \ + serial_setbrg_dev(port); \ + } \ + static int eserial##port##_getc(void) \ + { \ + return serial_getc_dev(port); \ + } \ + static int eserial##port##_tstc(void) \ + { \ + return serial_tstc_dev(port); \ + } \ + static void eserial##port##_putc(const char c) \ + { \ + serial_putc_dev(port, c); \ + } \ + static void eserial##port##_puts(const char *s) \ + { \ + serial_puts_dev(port, s); \ + } /* Serial device descriptor */ #define INIT_ESERIAL_STRUCTURE(port, __name) { \ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 1e187e5b52..8b24e00e27 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1978,8 +1978,8 @@ static int is_eth_addr_valid(char *str) p = q; } - if (i == 6) /* it looks ok */ - return 1; + /* Now check the contents. */ + return is_valid_ether_addr(ea); } return 0; } diff --git a/fs/Makefile b/fs/Makefile index b4db606236..d0ab3aec56 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -1,6 +1,7 @@ # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. # # See file CREDITS for list of people who contributed to this # project. @@ -20,24 +21,27 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# -subdirs-$(CONFIG_CMD_CBFS) += cbfs -subdirs-$(CONFIG_CMD_CRAMFS) := cramfs -subdirs-$(CONFIG_CMD_EXT4) += ext4 -ifndef CONFIG_CMD_EXT4 -subdirs-$(CONFIG_CMD_EXT2) += ext4 -endif -subdirs-$(CONFIG_CMD_FAT) += fat -subdirs-$(CONFIG_CMD_FDOS) += fdos -subdirs-$(CONFIG_CMD_JFFS2) += jffs2 -subdirs-$(CONFIG_CMD_REISER) += reiserfs -subdirs-$(CONFIG_YAFFS2) += yaffs2 -subdirs-$(CONFIG_CMD_UBIFS) += ubifs -subdirs-$(CONFIG_CMD_ZFS) += zfs - -SUBDIRS := $(subdirs-y) - -$(obj).depend all: - @for dir in $(SUBDIRS) ; do \ - $(MAKE) -C $$dir $@ ; done +include $(TOPDIR)/config.mk + +LIB = $(obj)libfs.o + +COBJS-y += fs.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index 82cd9ae16a..bb801f9054 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -30,11 +30,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)libext4fs.o AOBJS = -COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o -ifndef CONFIG_CMD_EXT4 -COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o -endif -COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o +COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o +COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y)) diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index d6d55b9fff..323875fa94 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -56,7 +56,7 @@ int ext4fs_indir3_blkno = -1; struct ext2_inode *g_parent_inode; static int symlinknest; -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n) { uint32_t res = size / n; diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h index f728134186..87cab168ee 100644 --- a/fs/ext4/ext4_common.h +++ b/fs/ext4/ext4_common.h @@ -37,7 +37,7 @@ #include <ext4fs.h> #include <malloc.h> #include <asm/errno.h> -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) #include "ext4_journal.h" #include "crc16.h" #endif @@ -71,7 +71,7 @@ int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode, int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name, struct ext2fs_node **fnode, int *ftype); -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n); int ext4fs_checksum_update(unsigned int i); int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags); diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 3a5ef20a4b..06536baf62 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -196,7 +196,7 @@ int ext4fs_read(char *buf, unsigned len) return ext4fs_read_file(ext4fs_file, 0, len, buf); } -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) static void ext4fs_update(void) { short i; diff --git a/fs/fat/Makefile b/fs/fat/Makefile index 02e6881670..969715bf9c 100644 --- a/fs/fat/Makefile +++ b/fs/fat/Makefile @@ -24,11 +24,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)libfat.o AOBJS = -COBJS-$(CONFIG_CMD_FAT) := fat.o +COBJS-$(CONFIG_FS_FAT) := fat.o COBJS-$(CONFIG_FAT_WRITE):= fat_write.o ifndef CONFIG_SPL_BUILD -COBJS-$(CONFIG_CMD_FAT) += file.o +COBJS-$(CONFIG_FS_FAT) += file.o endif SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 4a60a2503e..393c3781eb 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -46,7 +46,6 @@ static void downcase(char *str) } static block_dev_desc_t *cur_dev; -static unsigned int cur_part_nr; static disk_partition_t cur_part_info; #define DOS_BOOT_MAGIC_OFFSET 0x1fe @@ -62,43 +61,12 @@ static int disk_read(__u32 block, __u32 nr_blocks, void *buf) cur_part_info.start + block, nr_blocks, buf); } -int fat_register_device(block_dev_desc_t * dev_desc, int part_no) +int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz); - /* First close any currently found FAT filesystem */ - cur_dev = NULL; - -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - - /* Read the partition table, if present */ - if (!get_partition_info(dev_desc, part_no, &cur_part_info)) { - cur_dev = dev_desc; - cur_part_nr = part_no; - } -#endif - - /* Otherwise it might be a superfloppy (whole-disk FAT filesystem) */ - if (!cur_dev) { - if (part_no != 0) { - printf("** Partition %d not valid on device %d **\n", - part_no, dev_desc->dev); - return -1; - } - - cur_dev = dev_desc; - cur_part_nr = 1; - cur_part_info.start = 0; - cur_part_info.size = dev_desc->lba; - cur_part_info.blksz = dev_desc->blksz; - memset(cur_part_info.name, 0, sizeof(cur_part_info.name)); - memset(cur_part_info.type, 0, sizeof(cur_part_info.type)); - } + cur_dev = dev_desc; + cur_part_info = *info; /* Make sure it has a valid FAT header */ if (disk_read(0, 1, buffer) != 1) { @@ -122,6 +90,34 @@ int fat_register_device(block_dev_desc_t * dev_desc, int part_no) return -1; } +int fat_register_device(block_dev_desc_t *dev_desc, int part_no) +{ + disk_partition_t info; + + /* First close any currently found FAT filesystem */ + cur_dev = NULL; + + /* Read the partition table, if present */ + if (get_partition_info(dev_desc, part_no, &info)) { + if (part_no != 0) { + printf("** Partition %d not valid on device %d **\n", + part_no, dev_desc->dev); + return -1; + } + + info.start = 0; + info.size = dev_desc->lba; + info.blksz = dev_desc->blksz; + info.name[0] = 0; + info.type[0] = 0; + info.bootable = 0; +#ifdef CONFIG_PARTITION_UUIDS + info.uuid[0] = 0; +#endif + } + + return fat_set_blk_dev(dev_desc, &info); +} /* * Get the first occurence of a directory delimiter ('/' or '\') in a string. @@ -1239,8 +1235,7 @@ int file_fat_detectfs(void) vol_label[11] = '\0'; volinfo.fs_type[5] = '\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part_nr, - volinfo.fs_type, vol_label); + printf("Filesystem: %s \"%s\"\n", volinfo.fs_type, vol_label); return 0; } diff --git a/fs/fs.c b/fs/fs.c new file mode 100644 index 0000000000..ff360afd4b --- /dev/null +++ b/fs/fs.c @@ -0,0 +1,323 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <config.h> +#include <common.h> +#include <part.h> +#include <ext4fs.h> +#include <fat.h> +#include <fs.h> + +DECLARE_GLOBAL_DATA_PTR; + +static block_dev_desc_t *fs_dev_desc; +static disk_partition_t fs_partition; +static int fs_type = FS_TYPE_ANY; + +static inline int fs_ls_unsupported(const char *dirname) +{ + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +static inline int fs_read_unsupported(const char *filename, ulong addr, + int offset, int len) +{ + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +#ifdef CONFIG_FS_FAT +static int fs_probe_fat(void) +{ + return fat_set_blk_dev(fs_dev_desc, &fs_partition); +} + +static void fs_close_fat(void) +{ +} + +#define fs_ls_fat file_fat_ls + +static int fs_read_fat(const char *filename, ulong addr, int offset, int len) +{ + int len_read; + + len_read = file_fat_read_at(filename, offset, + (unsigned char *)addr, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} +#else +static inline int fs_probe_fat(void) +{ + return -1; +} + +static inline void fs_close_fat(void) +{ +} + +#define fs_ls_fat fs_ls_unsupported +#define fs_read_fat fs_read_unsupported +#endif + +#ifdef CONFIG_FS_EXT4 +static int fs_probe_ext(void) +{ + ext4fs_set_blk_dev(fs_dev_desc, &fs_partition); + + if (!ext4fs_mount(fs_partition.size)) { + ext4fs_close(); + return -1; + } + + return 0; +} + +static void fs_close_ext(void) +{ + ext4fs_close(); +} + +#define fs_ls_ext ext4fs_ls + +static int fs_read_ext(const char *filename, ulong addr, int offset, int len) +{ + int file_len; + int len_read; + + if (offset != 0) { + printf("** Cannot support non-zero offset **\n"); + return -1; + } + + file_len = ext4fs_open(filename); + if (file_len < 0) { + printf("** File not found %s **\n", filename); + ext4fs_close(); + return -1; + } + + if (len == 0) + len = file_len; + + len_read = ext4fs_read((char *)addr, len); + ext4fs_close(); + + if (len_read != len) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} +#else +static inline int fs_probe_ext(void) +{ + return -1; +} + +static inline void fs_close_ext(void) +{ +} + +#define fs_ls_ext fs_ls_unsupported +#define fs_read_ext fs_read_unsupported +#endif + +static struct { + int fstype; + int (*probe)(void); +} fstypes[] = { + { + .fstype = FS_TYPE_FAT, + .probe = fs_probe_fat, + }, + { + .fstype = FS_TYPE_EXT, + .probe = fs_probe_ext, + }, +}; + +int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype) +{ + int part, i; +#ifdef CONFIG_NEEDS_MANUAL_RELOC + static int relocated; + + if (!relocated) { + for (i = 0; i < ARRAY_SIZE(fstypes); i++) + fstypes[i].probe += gd->reloc_off; + relocated = 1; + } +#endif + + part = get_device_and_partition(ifname, dev_part_str, &fs_dev_desc, + &fs_partition, 1); + if (part < 0) + return -1; + + for (i = 0; i < ARRAY_SIZE(fstypes); i++) { + if ((fstype != FS_TYPE_ANY) && (fstype != fstypes[i].fstype)) + continue; + + if (!fstypes[i].probe()) { + fs_type = fstypes[i].fstype; + return 0; + } + } + + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +static void fs_close(void) +{ + switch (fs_type) { + case FS_TYPE_FAT: + fs_close_fat(); + break; + case FS_TYPE_EXT: + fs_close_ext(); + break; + default: + break; + } + + fs_type = FS_TYPE_ANY; +} + +int fs_ls(const char *dirname) +{ + int ret; + + switch (fs_type) { + case FS_TYPE_FAT: + ret = fs_ls_fat(dirname); + break; + case FS_TYPE_EXT: + ret = fs_ls_ext(dirname); + break; + default: + ret = fs_ls_unsupported(dirname); + break; + } + + fs_close(); + + return ret; +} + +int fs_read(const char *filename, ulong addr, int offset, int len) +{ + int ret; + + switch (fs_type) { + case FS_TYPE_FAT: + ret = fs_read_fat(filename, addr, offset, len); + break; + case FS_TYPE_EXT: + ret = fs_read_ext(filename, addr, offset, len); + break; + default: + ret = fs_read_unsupported(filename, addr, offset, len); + break; + } + + fs_close(); + + return ret; +} + +int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype, int cmdline_base) +{ + unsigned long addr; + const char *addr_str; + const char *filename; + unsigned long bytes; + unsigned long pos; + int len_read; + char buf[12]; + + if (argc < 2) + return CMD_RET_USAGE; + if (argc > 7) + return CMD_RET_USAGE; + + if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype)) + return 1; + + if (argc >= 4) { + addr = simple_strtoul(argv[3], NULL, cmdline_base); + } else { + addr_str = getenv("loadaddr"); + if (addr_str != NULL) + addr = simple_strtoul(addr_str, NULL, 16); + else + addr = CONFIG_SYS_LOAD_ADDR; + } + if (argc >= 5) { + filename = argv[4]; + } else { + filename = getenv("bootfile"); + if (!filename) { + puts("** No boot file defined **\n"); + return 1; + } + } + if (argc >= 6) + bytes = simple_strtoul(argv[5], NULL, cmdline_base); + else + bytes = 0; + if (argc >= 7) + pos = simple_strtoul(argv[6], NULL, cmdline_base); + else + pos = 0; + + len_read = fs_read(filename, addr, pos, bytes); + if (len_read <= 0) + return 1; + + printf("%d bytes read\n", len_read); + + sprintf(buf, "0x%x", len_read); + setenv("filesize", buf); + + return 0; +} + +int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype) +{ + if (argc < 2) + return CMD_RET_USAGE; + if (argc > 4) + return CMD_RET_USAGE; + + if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype)) + return 1; + + if (fs_ls(argc >= 4 ? argv[3] : "/")) + return 1; + + return 0; +} diff --git a/fs/yaffs2/ydirectenv.h b/fs/yaffs2/ydirectenv.h index c912b09a40..c2ffbfd56d 100644 --- a/fs/yaffs2/ydirectenv.h +++ b/fs/yaffs2/ydirectenv.h @@ -56,8 +56,6 @@ void yaffs_qsort(void *aa, size_t n, size_t es, #ifdef NO_inline #define inline -#else -#define inline __inline__ #endif #define cond_resched() do {} while (0) diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 360f723c84..2db45b1928 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -2002,49 +2002,6 @@ zfs_fetch_nvlist(device_t dev, char **nvlist) return err; } -static int -zfs_label(device_t device, char **label) -{ - char *nvlist; - int err; - struct zfs_data *data; - - data = zfs_mount(device); - if (!data) - return ZFS_ERR_BAD_FS; - - err = int_zfs_fetch_nvlist(data, &nvlist); - if (err) { - zfs_unmount(data); - return err; - } - - *label = zfs_nvlist_lookup_string(nvlist, ZPOOL_CONFIG_POOL_NAME); - free(nvlist); - zfs_unmount(data); - return ZFS_ERR_NONE; -} - -static int -zfs_uuid(device_t device, char **uuid) -{ - struct zfs_data *data; - - data = zfs_mount(device); - if (!data) - return ZFS_ERR_BAD_FS; - - *uuid = malloc(17); /* %016llx + nil */ - if (!*uuid) - return ZFS_ERR_OUT_OF_MEMORY; - - /* *uuid = xasprintf ("%016llx", (long long unsigned) data->pool_guid);*/ - snprintf(*uuid, 17, "%016llx", (long long unsigned) data->pool_guid); - zfs_unmount(data); - - return ZFS_ERR_NONE; -} - /* * zfs_open() locates a file in the rootpool by following the * MOS and places the dnode of the file in the memory address DNODE. @@ -2325,14 +2282,6 @@ zfs_ls(device_t device, const char *path, struct zfs_data *data; int err; int isfs; -#if 0 - char *label = NULL; - - zfs_label(device, &label); - if (label) - printf("ZPOOL label '%s'\n", - label); -#endif data = zfs_mount(device); if (!data) diff --git a/include/ahci.h b/include/ahci.h index c4fb9e79a5..babbdc656f 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -51,6 +51,7 @@ #define HOST_IRQ_STAT 0x08 /* interrupt status */ #define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ #define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ +#define HOST_CAP2 0x24 /* host capabilities, extended */ /* HOST_CTL bits */ #define HOST_RESET (1 << 0) /* reset controller; self-clear */ diff --git a/include/ata.h b/include/ata.h index 3b2d737e61..a614724b8e 100644 --- a/include/ata.h +++ b/include/ata.h @@ -114,6 +114,9 @@ #define ATA_CMD_WRITE_EXT 0x34 /* Write Sectores (with retries) with 48bit addressing */ #define ATA_CMD_VRFY_EXT 0x42 /* Read Verify (with retries) with 48bit addressing */ +#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */ +#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */ + /* * ATAPI Commands */ diff --git a/include/common.h b/include/common.h index b23e90b025..5e3c5eeee1 100644 --- a/include/common.h +++ b/include/common.h @@ -341,13 +341,9 @@ char *getenv (const char *); int getenv_f (const char *name, char *buf, unsigned len); ulong getenv_ulong(const char *name, int base, ulong default_val); int saveenv (void); -#ifdef CONFIG_PPC /* ARM version to be fixed! */ -int inline setenv (const char *, const char *); -#else int setenv (const char *, const char *); int setenv_ulong(const char *varname, ulong value); int setenv_addr(const char *varname, const void *addr); -#endif /* CONFIG_PPC */ #ifdef CONFIG_ARM # include <asm/mach-types.h> # include <asm/setup.h> diff --git a/include/commproc.h b/include/commproc.h index 8b8cc45dad..7ca28c8369 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -466,39 +466,6 @@ typedef struct scc_enet { #endif /* MPC860ADS */ -/*** AMX860 **********************************************/ - -#if defined(CONFIG_AMX860) - -/* This ENET stuff is for the AMX860 with ethernet on SCC1. - */ - -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 - -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0400) -#define PA_ENET_RCLK ((ushort)0x0800) - -#define PB_ENET_TENA ((uint)0x00001000) - -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003e) - -/* 68160 PHY control */ - -#define PB_ENET_ETHLOOP ((uint)0x00020000) -#define PB_ENET_TPFLDL ((uint)0x00010000) -#define PB_ENET_TPSQEL ((uint)0x00008000) -#define PD_ENET_ETH_EN ((ushort)0x0004) - -#endif /* CONFIG_AMX860 */ - /*** BSEIP **********************************************************/ #ifdef CONFIG_BSEIP @@ -547,38 +514,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00003400) #endif /* CONFIG_FLAGADM */ -/*** C2MON **********************************************************/ - -#ifdef CONFIG_C2MON - -# ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */ -# error "Ethernet on SCC not supported on C2MON Board!" -# else /* Use FEC for Fast Ethernet */ - -#undef SCC_ENET -#define FEC_ENET - -#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ -#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ -#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ -#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ -#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ -#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ -#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ -#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ -#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ -#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ -#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ -#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ -#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ - -#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ - -# endif /* CONFIG_FEC_ENET */ -#endif /* CONFIG_C2MON */ - -/*********************************************************************/ - /*** ELPT860 *********************************************************/ #ifdef CONFIG_ELPT860 @@ -828,33 +763,6 @@ typedef struct scc_enet { #endif /* CONFIG_HERMES */ -/*** IAD210 **********************************************************/ - -/* The IAD210 uses the FEC on a MPC860P for Ethernet */ - -#if defined(CONFIG_IAD210) - -# define FEC_ENET /* use FEC for Ethernet */ -# undef SCC_ENET - -# define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */ -# define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */ -# define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */ -# define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */ -# define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */ -# define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */ -# define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */ -# define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */ -# define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */ -# define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */ -# define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */ -# define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */ -# define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */ - -# define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */ - -#endif /* CONFIG_IAD210 */ - /*** ICU862 **********************************************************/ #if defined(CONFIG_ICU862) @@ -954,34 +862,6 @@ typedef struct scc_enet { #endif /* CONFIG_KUP4K */ - -/*** LANTEC *********************************************************/ - -#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2 -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */ -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000FF00) -#define SICR_ENET_CLKRT ((uint)0x00002E00) -#endif /* CONFIG_LANTEC v2 */ - /*** LWMON **********************************************************/ #if defined(CONFIG_LWMON) @@ -1373,15 +1253,14 @@ typedef struct scc_enet { #endif /* CONFIG_SXNI855T */ -/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/ +/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ - defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \ - defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \ - defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \ - defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \ - (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2) + defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \ + defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \ + defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \ + defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2) /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 430890c3fb..bfb9680d68 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -13,4 +13,17 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif +#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT) +#define CONFIG_FS_FAT +#endif + +#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \ + !defined(CONFIG_FS_EXT4) +#define CONFIG_FS_EXT4 +#endif + +#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE) +#define CONFIG_EXT4_WRITE +#endif + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h deleted file mode 100644 index e7a6c80f62..0000000000 --- a/include/configs/AMX860.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 -#define CONFIG_AMX860 1 - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */ -#undef CONFIG_8xx_CONS_SMC2 -#define CONFIG_8xx_CONS_SCC2 1 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#define MPC8XX_FACT 10 /* Multiply by 10 */ -#define MPC8XX_XIN 5000000 /* 5 MHz in */ -#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_BOOTCOMMAND \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" /* autoboot command */ - -#undef CONFIG_BOOTARGS - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * U-Boot for AMX board supports two types of memory extension - * modules: one that provides 4 MB flash memory, and another one with - * 16 MB EDO DRAM. - * - * The flash module swaps the CS0 and CS1 signals: if the module is - * installed, CS0 is connected to Flash on the module and CS1 is - * connected to the on-board Flash. This means that you must intall - * U-Boot when the Flash module is plugged in, if you plan to use - * it. - * - * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT - * must be defined. The DRAM module uses CS1. - * - * Only one of these modules may be installed at a time. If U-Boot - * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not - * work if the Flash extension module is installed instead of the - * DRAM module. - */ -#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - * - * Use 4 MB for without and 8 MB with 16 MB DRAM extension module - * (CONFIG_AMX_RAM_EXT) - */ -#ifdef CONFIG_AMX_RAM_EXT -# define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#else -# define CONFIG_SYS_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */ -#endif -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) - -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#ifndef CONFIG_AMX_RAM_EXT -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ -#endif - -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ - -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ -/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - -#define CONFIG_SYS_OR0_PRELIM 0xFFC00954 /* Real values for the board */ -#define CONFIG_SYS_BR0_PRELIM 0x40000001 /* Real values for the board */ - -#ifndef CONFIG_AMX_RAM_EXT -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM 0xFFC00954 /* Real values for the board */ -#define CONFIG_SYS_BR1_PRELIM 0x60000001 /* Real values for the board */ -#endif - -/* DSP ("Glue") Xilinx */ -#define CONFIG_SYS_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */ -#define CONFIG_SYS_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h deleted file mode 100644 index 2703625677..0000000000 --- a/include/configs/ETX094.h +++ /dev/null @@ -1,357 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_ETX094 1 /* ...on a ETX_094 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 57600 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */ -#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */ -#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */ - -#define CONFIG_ETHADDR 08:00:06:00:00:00 - -#ifdef CONFIG_ETHADDR -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 /* default MAC can be overwritten once */ -#endif - -#undef CONFIG_BOOTARGS -#define CONFIG_RAMBOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/ram rw ramdisk_size=4690 " \ - "U-Boot_version=U-Boot-1.0.x-Date " \ - "panic=1 " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" -#define CONFIG_NFSBOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG 1 /* watchdog enabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_FLASH_16BIT -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#else -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -#endif - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - leave PLL multiplication factor unchanged ! - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | \ - OR_SCY_2_CLK | OR_TRLX ) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - -#ifdef CONFIG_FLASH_16BIT /* 16 bit data port */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) -#else /* 32 bit data port */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32) -#endif /* CONFIG_FLASH_16BIT */ - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 23 /* start with divider for 100 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h deleted file mode 100644 index 94b05dce41..0000000000 --- a/include/configs/IAD210.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <mpc8xx_irq.h> - - -# ifdef DEBUG -# warning DEBUG Defined -# endif /* DEBUG */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC860 1 -#define CONFIG_IAD210 1 /* ...on a IAD210 module */ -#define CONFIG_MPC860T 1 -#define CONFIG_MPC862 1 - -#define CONFIG_SYS_TEXT_BASE 0x08000000 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#undef CONFIG_8xx_CONS_SMC1 -#undef CONFIG_8xx_CONS_SMC2 -#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 - - -# define MPC8XX_FACT 16 -# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */ -# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#if 0 -# define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -/* using this define saves us updating another source file */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -#undef CONFIG_BOOTARGS -/* #define CONFIG_BOOTCOMMAND \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" -*/ - -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/nfs" \ - "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ -# define CONFIG_FEC_ENET 1 /* use FEC ethernet */ -# define CONFIG_MII 1 -# define CONFIG_SYS_DISCOVER_PHY 1 -# define CONFIG_FEC_UTOPIA 1 -# define CONFIG_ETHADDR 08:00:06:26:A2:6D -# define CONFIG_IPADDR 192.168.28.128 -# define CONFIG_SERVERIP 139.10.137.138 -# define CONFIG_SYS_DISCOVER_PHY 1 - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -# define CONFIG_SYS_I2C_SPEED 50000 -# define CONFIG_SYS_I2C_SLAVE 0xDD -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 -#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined(DEBUG) -# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif - -# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 - -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \ - SCCR_DFLCD000 |SCCR_DFALCD00 ) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */ -#define CONFIG_SYS_RCCR 0x0020 - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* Because of the way the 860 starts up and assigns CS0 the -* entire address space, we have to set the memory controller -* differently. Normally, you write the option register -* first, and then enable the chip select by writing the -* base register. For CS0, you must write the base register -* first, followed by the option register. -*/ - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */ - -/* FLASH timing: - TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ - OR_SCY_3_CLK | OR_EHTR) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM | OR_BI | OR_ACS_DIV4) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X) - -#ifdef CONFIG_MPC860T - -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -#endif /* CONFIG_MPC860T */ - - -#endif /* __CONFIG_H */ diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h deleted file mode 100644 index c3855c332c..0000000000 --- a/include/configs/LANTEC.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2001 - * Torsten Stevens, FHG IMS, stevens@ims.fhg.de - * Bruno Achauer, Exet AG, bruno@exet-ag.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - * [derived from config_TQM850L.h] - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -/* - * Port assignments (CONFIG_LANTEC == 1): - * - SMC1: J11 (MDB) ? - * - SMC2: J6 (Feature connector) - * - SCC2: J9 (RJ45) - * - SCC3: J8 (Sub-D9) - * - * Port assignments (CONFIG_LANTEC == 2): TBD - */ - - -#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ -#define CONFIG_8xx_CONS_SCC3 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_XIMG - -#if !(CONFIG_LANTEC >= 2) - #undef CONFIG_CMD_DATE - #undef CONFIG_CMD_NET -#endif - - -#if CONFIG_LANTEC >= 2 -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK) - -/*----------------------------------------------------------------------- - * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX] - *----------------------------------------------------------------------- - */ -#define CONFIG_8xx_GCLK_FREQ 33000000 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ - /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 - /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/5 and OR0/5 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ - OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM) - -#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * Memory Periodic Timer Prescaler - */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL \ - ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 6c96111a7e..3be2f8ef33 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -350,7 +350,7 @@ #endif #if defined(CONFIG_SYS_NAND_BOOT) #define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_OFFSET 0x80000 #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 diff --git a/include/configs/SCM.h b/include/configs/SCM.h deleted file mode 100644 index 87d52babe6..0000000000 --- a/include/configs/SCM.h +++ /dev/null @@ -1,710 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ -#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */ -#define CONFIG_SCM 1 /* ...on a System Controller Module */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#if (CONFIG_TQM8260 <= 100) -# error "TQM8260 module revison not supported" -#endif - -/* We use a TQM8260 module with a 300MHz CPU */ -#define CONFIG_300MHz - -/* Define 60x busmode only if your TQM8260 has L2 cache! */ -#ifdef CONFIG_L2_CACHE -# define CONFIG_BUSMODE_60x 1 /* bus mode: 60x */ -#else -# undef CONFIG_BUSMODE_60x /* bus mode: 8260 */ -#endif - -/* The board with 300MHz CPU doesn't have L2 cache, but works in 60x bus mode */ -#ifdef CONFIG_300MHz -# define CONFIG_BUSMODE_60x -#endif - -#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * Software (bit-bang) I2C driver configuration - */ - -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_I2C_X - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#define CONFIG_CONS_ON_SMC /* define if console on SMC */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#ifdef CONFIG_82xx_CONS_SMC1 -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#endif -#ifdef CONFIG_82xx_CONS_SMC2 -#define CONFIG_CONS_INDEX 2 /* which serial channel for console */ -#endif - -#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */ -#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - * - * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the - * X.29 connector, and FCC2 is hardwired to the X.1 connector) - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK12 - * - Tx-CLK is CLK11 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) - -/* - * - Rx-CLK is CLK15 - * - Tx-CLK is CLK16 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */ - - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#ifndef CONFIG_300MHz -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 83333000 /* in Hz */ -#endif - -#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 230400 -#else -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_BSP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */ - -#define CONFIG_MISC_INIT_R /* have misc_init_r() function */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - - -/* What should the base address of the main FLASH be and how big is - * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk - * The main FLASH is whichever is connected to *CS0. - */ -#define CONFIG_SYS_FLASH0_BASE 0x40000000 -#define CONFIG_SYS_FLASH1_BASE 0x60000000 -#define CONFIG_SYS_FLASH0_SIZE 32 -#define CONFIG_SYS_FLASH1_SIZE 32 - -/* Flash bank size (for preliminary settings) - */ -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#if 0 -/* Start port with environment in flash; switch to EEPROM later */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x40000) -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#else -/* Final version: environment in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 2048 -#endif - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#if defined(CONFIG_266MHz) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \ - HRCW_MODCK_H0111) -#elif defined(CONFIG_300MHz) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \ - HRCW_MODCK_H0110) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS) -#endif - -/* no slaves so just fill with zeros */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * - * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM - * is mapped at SDRAM_BASE2_PRELIM. - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ - HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR RMR_CSRE - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#ifdef CONFIG_BUSMODE_60x -#define CONFIG_SYS_BCR (BCR_EBM|BCR_L2C|BCR_LETM|\ - BCR_NPQM0|BCR_NPQM1|BCR_NPQM2) /* 60x mode */ -#else -#define BCR_APD01 0x10000000 -#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */ -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#if 0 -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10) -#else -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10) -#endif - - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR 0 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 64 bit FLASH - * 1 60x SDRAM 64 bit SDRAM - * 2 Local SDRAM 32 bit SDRAM - * - */ - - /* Initialize SDRAM on local bus - */ -#define CONFIG_SYS_INIT_LOCAL_SDRAM - -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ - -/* Minimum mask to separate preliminary - * address ranges for CS[0:2] - */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */ -#define CONFIG_SYS_LOCAL_SDRAM_LIMIT (128<<20) /* less than 128 MB */ - -#define CONFIG_SYS_MPTPR 0x4000 - -/*----------------------------------------------------------------------------- - * Address for Mode Register Set (MRS) command - *----------------------------------------------------------------------------- - * In fact, the address is rather configuration data presented to the SDRAM on - * its address lines. Because the address lines may be mux'ed externally either - * for 8 column or 9 column devices, some bits appear twice in the 8260's - * address: - * - * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length | - * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 | - * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 | - * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 | - * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 | - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MRS_OFFS 0x00000110 - - -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxG_EHTR |\ - ORxG_TRLX) - - /* SDRAM on TQM8260 can have either 8 or 9 columns. - * The number affects configuration values. - */ - -/* Bank 1 - 60x bus SDRAM - */ -#define CONFIG_SYS_PSRT 0x20 -#define CONFIG_SYS_LSRT 0x20 -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL - - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A7 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\ - PSDMR_SDAM_A15_IS_A5 |\ - PSDMR_BSMA_A12_A14 |\ - PSDMR_SDA10_PBI1_A8 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_EAMUX |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A5 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\ - PSDMR_SDAM_A16_IS_A5 |\ - PSDMR_BSMA_A12_A14 |\ - PSDMR_SDA10_PBI1_A7 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_EAMUX |\ - PSDMR_CL_2) - -/* Bank 2 - Local bus SDRAM - */ -#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_SDRAM_L |\ - BRx_V) - -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL - -#define SDRAM_BASE2_PRELIM 0x80000000 - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR2_8COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A8 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_LSDMR_8COL (PSDMR_PBI |\ - PSDMR_SDAM_A15_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI1_A9 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR2_9COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A6 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_LSDMR_9COL (PSDMR_PBI |\ - PSDMR_SDAM_A16_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI1_A8 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_CL_2) - -#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */ - -#endif /* CONFIG_SYS_RAMBOOT */ - -#define CONFIG_SYS_CAN0_BASE 0xc0000000 -#define CONFIG_SYS_CAN1_BASE 0xc0008000 -#define CONFIG_SYS_FIOX_BASE 0xc0010000 -#define CONFIG_SYS_FDOHM_BASE 0xc0018000 -#define CONFIG_SYS_EXTPROM_BASE 0xc2000000 - -#define CONFIG_SYS_CAN_SIZE 0x00000100 -#define CONFIG_SYS_FIOX_SIZE 0x00000020 -#define CONFIG_SYS_FDOHM_SIZE 0x00002000 -#define CONFIG_SYS_EXTPROM_BANK_SIZE 0x01000000 - -#define EXT_EEPROM_MAX_FLASH_BANKS 0x02 - -/* CS3 - CAN 0 - */ -#define CONFIG_SYS_CAN0_BR3 ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_UPMA |\ - BRx_V) - -#define CONFIG_SYS_CAN0_OR3 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\ - ORxU_BI |\ - ORxU_EHTR_4IDLE) - -/* CS4 - CAN 1 - */ -#define CONFIG_SYS_CAN1_BR4 ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_UPMA |\ - BRx_V) - -#define CONFIG_SYS_CAN1_OR4 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\ - ORxU_BI |\ - ORxU_EHTR_4IDLE) - -/* CS5 - Extended PROM (16MB optional) - */ -#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\ - ORxG_CSNT |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS6 - Extended PROM (16MB optional) - */ -#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \ - CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\ - ORxG_CSNT |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS7 - FPGA FIOX: Glue Logic - */ -#define CONFIG_SYS_FIOX_BR7 ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_FIOX_OR7 (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE) |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS8 - FPGA DOH Master - */ -#define CONFIG_SYS_FDOHM_BR8 ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_FDOHM_OR8 (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE) |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - - -/* FPGA configuration */ -#define CONFIG_SYS_PD_FIOX_PROG (1 << (31- 5)) /* PD 5 */ -#define CONFIG_SYS_PD_FIOX_DONE (1 << (31-28)) /* PD 28 */ -#define CONFIG_SYS_PD_FIOX_INIT (1 << (31-29)) /* PD 29 */ - -#define CONFIG_SYS_PD_FDOHM_PROG (1 << (31- 4)) /* PD 4 */ -#define CONFIG_SYS_PD_FDOHM_DONE (1 << (31-26)) /* PD 26 */ -#define CONFIG_SYS_PD_FDOHM_INIT (1 << (31-27)) /* PD 27 */ - - -#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index cdb6697890..b6e48f8a63 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -29,6 +29,7 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_NO_FLASH #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM @@ -46,11 +47,14 @@ /* set to negative value for no autoboot */ #define CONFIG_BOOTDELAY 1 +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ "rdaddr=0x81000000\0" \ "bootfile=/boot/uImage\0" \ + "fdtfile=\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mmcdev=0\0" \ @@ -79,6 +83,13 @@ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ "bootm ${loadaddr}\0" \ + "findfdt="\ + "if test $board_name = A335BONE; then " \ + "setenv fdtfile am335x-bone.dtb; fi; " \ + "if test $board_name = A33515BB; then " \ + "setenv fdtfile am335x-evm.dtb; fi; " \ + "if test $board_name = A335X_SK; then " \ + "setenv fdtfile am335x-evmsk.dtb; fi\0" \ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h deleted file mode 100644 index 41ff00847a..0000000000 --- a/include/configs/c2mon.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC855 1 /* This is a MPC855 CPU */ -#define CONFIG_C2MON 1 /* ...on a C2MON module */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_80MHz 1 /* Running at 5 * 16 = 80 MHz */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_FEC_ENET 1 /* Use Fast Ethernet Controller */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ -#define CONFIG_SYS_PLPRCR \ - ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) -#else /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) -#endif /* CONFIG_80MHz */ - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#else /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif /* CONFIG_80MHz */ - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * PCMCIA Power Switch - * - * The C2MON uses a TPS2211A PC-Card Power-Interface Switch to - * control the voltages on the PCMCIA slot which is connected - * to Port C (all outputs) and Port B (Over-Current Input) - *----------------------------------------------------------------------- - */ - /* Output pins */ -#define TPS2211_VCCD0 0x0002 /* PC.14 */ -#define TPS2211_VCCD1 0x0004 /* PC.13 */ -#define TPS2211_VPPD0 0x0008 /* PC.12 */ -#define TPS2211_VPPD1 0x0010 /* PC.11 */ -#define TPS2211_OUTPUTS ( TPS2211_VCCD0 | TPS2211_VCCD1 | \ - TPS2211_VPPD0 | TPS2211_VPPD1 ) - - /* Input pins */ -#define TPS2211_OC 0x00000200 /* PB.22: Over-Current */ -#define TPS2211_INPUTS ( TPS2211_OC ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) -#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ -#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ -#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ -#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI) -#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \ - BR_PS_8 | BR_MS_UPMB | BR_V ) -#endif /* CONFIG_CAN_DRIVER */ - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 3df085be51..cc95e2be98 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -45,6 +45,28 @@ #undef CONFIG_WATCHDOG #undef CONFIG_HW_WATCHDOG +/* SATA AHCI storage */ + +#define CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SYS_64BIT_LBA +#define CONFIG_SATA_INTEL 1 +#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + /*----------------------------------------------------------------------- * Real Time Clock Configuration */ diff --git a/include/env_default.h b/include/env_default.h index 375e5ca15c..a1db73a2c5 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -118,6 +118,7 @@ const uchar default_environment[] = { "arch=" CONFIG_SYS_ARCH "\0" "cpu=" CONFIG_SYS_CPU "\0" "board=" CONFIG_SYS_BOARD "\0" + "board_name=" CONFIG_SYS_BOARD "\0" #ifdef CONFIG_SYS_VENDOR "vendor=" CONFIG_SYS_VENDOR "\0" #endif diff --git a/include/ext4fs.h b/include/ext4fs.h index 23298fcd7d..3b59d15aab 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -116,7 +116,7 @@ struct ext_filesystem { extern struct ext2_data *ext4fs_root; extern struct ext2fs_node *ext4fs_file; -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) extern struct ext2_inode *g_parent_inode; extern int gd_index; extern int gindex; diff --git a/include/ext_common.h b/include/ext_common.h index ce73857f8d..86373a6e50 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -195,7 +195,4 @@ int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc, int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); -int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc, - char *const argv[]); -int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); #endif diff --git a/include/fat.h b/include/fat.h index cc85b06395..706cd7a4bd 100644 --- a/include/fat.h +++ b/include/fat.h @@ -212,6 +212,7 @@ long file_fat_read_at(const char *filename, unsigned long pos, void *buffer, unsigned long maxsize); long file_fat_read(const char *filename, void *buffer, unsigned long maxsize); const char *file_getfsname(int idx); +int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); int fat_register_device(block_dev_desc_t *dev_desc, int part_no); int file_fat_write(const char *filename, void *buffer, unsigned long maxsize); diff --git a/include/fs.h b/include/fs.h new file mode 100644 index 0000000000..4f30a385a0 --- /dev/null +++ b/include/fs.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef _FS_H +#define _FS_H + +#include <common.h> + +#define FS_TYPE_ANY 0 +#define FS_TYPE_FAT 1 +#define FS_TYPE_EXT 2 + +/* + * Tell the fs layer which block device an partition to use for future + * commands. This also internally identifies the filesystem that is present + * within the partition. The identification process may be limited to a + * specific filesystem type by passing FS_* in the fstype parameter. + * + * Returns 0 on success. + * Returns non-zero if there is an error accessing the disk or partition, or + * no known filesystem type could be recognized on it. + */ +int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype); + +/* + * Print the list of files on the partition previously set by fs_set_blk_dev(), + * in directory "dirname". + * + * Returns 0 on success. Returns non-zero on error. + */ +int fs_ls(const char *dirname); + +/* + * Read file "filename" from the partition previously set by fs_set_blk_dev(), + * to address "addr", starting at byte offset "offset", and reading "len" + * bytes. "offset" may be 0 to read from the start of the file. "len" may be + * 0 to read the entire file. Note that not all filesystem types support + * either/both offset!=0 or len!=0. + * + * Returns number of bytes read on success. Returns <= 0 on error. + */ +int fs_read(const char *filename, ulong addr, int offset, int len); + +/* + * Common implementation for various filesystem commands, optionally limited + * to a specific filesystem type via the fstype parameter. + */ +int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype, int cmdline_base); +int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype); + +#endif /* _FS_H */ diff --git a/include/image.h b/include/image.h index 4e5863ff7f..0a895f2044 100644 --- a/include/image.h +++ b/include/image.h @@ -34,6 +34,7 @@ #define __IMAGE_H__ #include "compiler.h" +#include <asm/byteorder.h> #ifdef USE_HOSTCC @@ -183,13 +184,13 @@ * all data in network byte order (aka natural aka bigendian). */ typedef struct image_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ + __be32 ih_magic; /* Image Header Magic Number */ + __be32 ih_hcrc; /* Image Header CRC Checksum */ + __be32 ih_time; /* Image Creation Timestamp */ + __be32 ih_size; /* Image Data Size */ + __be32 ih_load; /* Data Load Address */ + __be32 ih_ep; /* Entry Point Address */ + __be32 ih_dcrc; /* Image Data CRC Checksum */ uint8_t ih_os; /* Operating System */ uint8_t ih_arch; /* CPU architecture */ uint8_t ih_type; /* Image Type */ diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h index 19b0c86e43..aaf77577c4 100644 --- a/include/linux/byteorder/big_endian.h +++ b/include/linux/byteorder/big_endian.h @@ -7,63 +7,104 @@ #ifndef __BIG_ENDIAN_BITFIELD #define __BIG_ENDIAN_BITFIELD #endif -#define __BYTE_ORDER __BIG_ENDIAN +#define __BYTE_ORDER __BIG_ENDIAN +#include <linux/compiler.h> +#include <linux/types.h> #include <linux/byteorder/swab.h> -#define __constant_htonl(x) ((__u32)(x)) -#define __constant_ntohl(x) ((__u32)(x)) -#define __constant_htons(x) ((__u16)(x)) -#define __constant_ntohs(x) ((__u16)(x)) -#define __constant_cpu_to_le64(x) ___swab64((x)) -#define __constant_le64_to_cpu(x) ___swab64((x)) -#define __constant_cpu_to_le32(x) ___swab32((x)) -#define __constant_le32_to_cpu(x) ___swab32((x)) -#define __constant_cpu_to_le16(x) ___swab16((x)) -#define __constant_le16_to_cpu(x) ___swab16((x)) -#define __constant_cpu_to_be64(x) ((__u64)(x)) -#define __constant_be64_to_cpu(x) ((__u64)(x)) -#define __constant_cpu_to_be32(x) ((__u32)(x)) -#define __constant_be32_to_cpu(x) ((__u32)(x)) -#define __constant_cpu_to_be16(x) ((__u16)(x)) -#define __constant_be16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_le64(x) __swab64((x)) -#define __le64_to_cpu(x) __swab64((x)) -#define __cpu_to_le32(x) __swab32((x)) -#define __le32_to_cpu(x) __swab32((x)) -#define __cpu_to_le16(x) __swab16((x)) -#define __le16_to_cpu(x) __swab16((x)) -#define __cpu_to_be64(x) ((__u64)(x)) -#define __be64_to_cpu(x) ((__u64)(x)) -#define __cpu_to_be32(x) ((__u32)(x)) -#define __be32_to_cpu(x) ((__u32)(x)) -#define __cpu_to_be16(x) ((__u16)(x)) -#define __be16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_le64p(x) __swab64p((x)) -#define __le64_to_cpup(x) __swab64p((x)) -#define __cpu_to_le32p(x) __swab32p((x)) -#define __le32_to_cpup(x) __swab32p((x)) -#define __cpu_to_le16p(x) __swab16p((x)) -#define __le16_to_cpup(x) __swab16p((x)) -#define __cpu_to_be64p(x) (*(__u64*)(x)) -#define __be64_to_cpup(x) (*(__u64*)(x)) -#define __cpu_to_be32p(x) (*(__u32*)(x)) -#define __be32_to_cpup(x) (*(__u32*)(x)) -#define __cpu_to_be16p(x) (*(__u16*)(x)) -#define __be16_to_cpup(x) (*(__u16*)(x)) +#define __constant_htonl(x) ((__force __be32)(__u32)(x)) +#define __constant_ntohl(x) ((__force __u32)(__be32)(x)) +#define __constant_htons(x) ((__force __be16)(__u16)(x)) +#define __constant_ntohs(x) ((__force __u16)(__be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x))) +#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x))) +#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x))) +#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)__swab64((x))) +#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)__swab32((x))) +#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)__swab16((x))) +#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __be16_to_cpu(x) ((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)__swab64p(p); +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)__swab32p(p); +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)__swab16p(p); +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return __swab16p((__u16 *)p); +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)*p; +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return (__force __u64)*p; +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)*p; +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return (__force __u32)*p; +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)*p; +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return (__force __u16)*p; +} #define __cpu_to_le64s(x) __swab64s((x)) #define __le64_to_cpus(x) __swab64s((x)) #define __cpu_to_le32s(x) __swab32s((x)) #define __le32_to_cpus(x) __swab32s((x)) #define __cpu_to_le16s(x) __swab16s((x)) #define __le16_to_cpus(x) __swab16s((x)) -#define __cpu_to_be64s(x) do {} while (0) -#define __be64_to_cpus(x) do {} while (0) -#define __cpu_to_be32s(x) do {} while (0) -#define __be32_to_cpus(x) do {} while (0) -#define __cpu_to_be16s(x) do {} while (0) -#define __be16_to_cpus(x) do {} while (0) +#define __cpu_to_be64s(x) do { (void)(x); } while (0) +#define __be64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be32s(x) do { (void)(x); } while (0) +#define __be32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be16s(x) do { (void)(x); } while (0) +#define __be16_to_cpus(x) do { (void)(x); } while (0) +#ifdef __KERNEL__ #include <linux/byteorder/generic.h> +#endif #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */ diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h index a46f3ecc12..a4cb3bfde5 100644 --- a/include/linux/byteorder/little_endian.h +++ b/include/linux/byteorder/little_endian.h @@ -9,54 +9,93 @@ #endif #define __BYTE_ORDER __LITTLE_ENDIAN +#include <linux/compiler.h> +#include <linux/types.h> #include <linux/byteorder/swab.h> -#define __constant_htonl(x) ___constant_swab32((x)) -#define __constant_ntohl(x) ___constant_swab32((x)) -#define __constant_htons(x) ___constant_swab16((x)) -#define __constant_ntohs(x) ___constant_swab16((x)) -#define __constant_cpu_to_le64(x) ((__u64)(x)) -#define __constant_le64_to_cpu(x) ((__u64)(x)) -#define __constant_cpu_to_le32(x) ((__u32)(x)) -#define __constant_le32_to_cpu(x) ((__u32)(x)) -#define __constant_cpu_to_le16(x) ((__u16)(x)) -#define __constant_le16_to_cpu(x) ((__u16)(x)) -#define __constant_cpu_to_be64(x) ___constant_swab64((x)) -#define __constant_be64_to_cpu(x) ___constant_swab64((x)) -#define __constant_cpu_to_be32(x) ___constant_swab32((x)) -#define __constant_be32_to_cpu(x) ___constant_swab32((x)) -#define __constant_cpu_to_be16(x) ___constant_swab16((x)) -#define __constant_be16_to_cpu(x) ___constant_swab16((x)) -#define __cpu_to_le64(x) ((__u64)(x)) -#define __le64_to_cpu(x) ((__u64)(x)) -#define __cpu_to_le32(x) ((__u32)(x)) -#define __le32_to_cpu(x) ((__u32)(x)) -#define __cpu_to_le16(x) ((__u16)(x)) -#define __le16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_be64(x) __swab64((x)) -#define __be64_to_cpu(x) __swab64((x)) -#define __cpu_to_be32(x) __swab32((x)) -#define __be32_to_cpu(x) __swab32((x)) -#define __cpu_to_be16(x) __swab16((x)) -#define __be16_to_cpu(x) __swab16((x)) -#define __cpu_to_le64p(x) (*(__u64*)(x)) -#define __le64_to_cpup(x) (*(__u64*)(x)) -#define __cpu_to_le32p(x) (*(__u32*)(x)) -#define __le32_to_cpup(x) (*(__u32*)(x)) -#define __cpu_to_le16p(x) (*(__u16*)(x)) -#define __le16_to_cpup(x) (*(__u16*)(x)) -#define __cpu_to_be64p(x) __swab64p((x)) -#define __be64_to_cpup(x) __swab64p((x)) -#define __cpu_to_be32p(x) __swab32p((x)) -#define __be32_to_cpup(x) __swab32p((x)) -#define __cpu_to_be16p(x) __swab16p((x)) -#define __be16_to_cpup(x) __swab16p((x)) -#define __cpu_to_le64s(x) do {} while (0) -#define __le64_to_cpus(x) do {} while (0) -#define __cpu_to_le32s(x) do {} while (0) -#define __le32_to_cpus(x) do {} while (0) -#define __cpu_to_le16s(x) do {} while (0) -#define __le16_to_cpus(x) do {} while (0) +#define __constant_htonl(x) ((__force __be32)___constant_swab32((x))) +#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x)) +#define __constant_htons(x) ((__force __be16)___constant_swab16((x))) +#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x))) +#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x))) +#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x))) +#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)__swab64((x))) +#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)__swab32((x))) +#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)__swab16((x))) +#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)*p; +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return (__force __u64)*p; +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)*p; +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return (__force __u32)*p; +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)*p; +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return (__force __u16)*p; +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)__swab64p(p); +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)__swab32p(p); +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)__swab16p(p); +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return __swab16p((__u16 *)p); +} +#define __cpu_to_le64s(x) do { (void)(x); } while (0) +#define __le64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le32s(x) do { (void)(x); } while (0) +#define __le32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le16s(x) do { (void)(x); } while (0) +#define __le16_to_cpus(x) do { (void)(x); } while (0) #define __cpu_to_be64s(x) __swab64s((x)) #define __be64_to_cpus(x) __swab64s((x)) #define __cpu_to_be32s(x) __swab32s((x)) @@ -64,6 +103,8 @@ #define __cpu_to_be16s(x) __swab16s((x)) #define __be16_to_cpus(x) __swab16s((x)) +#ifdef __KERNEL__ #include <linux/byteorder/generic.h> +#endif #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */ diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h index b1d570e528..bb4a046937 100644 --- a/include/linux/byteorder/swab.h +++ b/include/linux/byteorder/swab.h @@ -100,7 +100,7 @@ static __inline__ __attribute__((const)) __u16 __fswab16(__u16 x) { return __arch__swab16(x); } -static __inline__ __u16 __swab16p(__u16 *x) +static __inline__ __u16 __swab16p(const __u16 *x) { return __arch__swab16p(x); } @@ -113,7 +113,7 @@ static __inline__ __attribute__((const)) __u32 __fswab32(__u32 x) { return __arch__swab32(x); } -static __inline__ __u32 __swab32p(__u32 *x) +static __inline__ __u32 __swab32p(const __u32 *x) { return __arch__swab32p(x); } @@ -133,7 +133,7 @@ static __inline__ __attribute__((const)) __u64 __fswab64(__u64 x) return __arch__swab64(x); # endif } -static __inline__ __u64 __swab64p(__u64 *x) +static __inline__ __u64 __swab64p(const __u64 *x) { return __arch__swab64p(x); } diff --git a/include/linux/compat.h b/include/linux/compat.h index 593b07f4b5..e1338bf489 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -1,9 +1,6 @@ #ifndef _LINUX_COMPAT_H_ #define _LINUX_COMPAT_H_ -#define __user -#define __iomem - #define ndelay(x) udelay(1) #define printk printf diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h index 5991157065..8bdd23112b 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/linux/mtd/mtd-abi.h @@ -11,6 +11,8 @@ #include <linux/compat.h> #endif +#include <linux/compiler.h> + struct erase_info_user { uint32_t start; uint32_t length; diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 81e34c260f..c540f6100d 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -12,7 +12,9 @@ #include <linux/types.h> #endif +#ifndef __CHECKER__ #undef offsetof #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) +#endif #endif diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h index cc688e1eb1..02d97ff3df 100644 --- a/include/linux/unaligned/generic.h +++ b/include/linux/unaligned/generic.h @@ -1,9 +1,6 @@ #ifndef _LINUX_UNALIGNED_GENERIC_H #define _LINUX_UNALIGNED_GENERIC_H -/* define __force to nothing in U-Boot */ -#define __force - /* * Cause a link-time error if we try an unaligned access other than * 1,2,4 or 8 bytes long diff --git a/include/net.h b/include/net.h index 35393366d3..970d4d1fab 100644 --- a/include/net.h +++ b/include/net.h @@ -102,12 +102,13 @@ extern int eth_register(struct eth_device* dev);/* Register network device */ extern int eth_unregister(struct eth_device *dev);/* Remove network device */ extern void eth_try_another(int first_restart); /* Change the device */ extern void eth_set_current(void); /* set nterface to ethcur var */ + /* get the current device MAC */ +extern struct eth_device *eth_current; + static inline __attribute__((always_inline)) struct eth_device *eth_get_dev(void) { - extern struct eth_device *eth_current; - return eth_current; } extern struct eth_device *eth_get_dev_by_name(const char *devname); @@ -517,10 +518,10 @@ enum net_loop_state { NETLOOP_SUCCESS, NETLOOP_FAIL }; +extern enum net_loop_state net_state; + static inline void net_set_state(enum net_loop_state state) { - extern enum net_loop_state net_state; - debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state); net_state = state; } diff --git a/include/pcmcia.h b/include/pcmcia.h index ca0bf224f1..0cc7f3ba54 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -58,8 +58,6 @@ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ICU862) /* The ICU862 use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B -#elif defined(CONFIG_C2MON) /* The C2MON use SLOT_B */ -# define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ diff --git a/include/scsi.h b/include/scsi.h index 89ae45f8e8..9da764bdcf 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -150,6 +150,8 @@ typedef struct SCSI_cmd_block{ #define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */ #define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */ #define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */ +#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */ +#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */ #define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */ #define SCSI_READ_LONG 0x3E /* Read Long (O) */ #define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */ @@ -189,6 +191,8 @@ void scsi_low_level_init(int busdevfunc); void scsi_init(void); void scsi_scan(int mode); +/** @return the number of scsi disks */ +int scsi_get_disk_count(void); #define SCSI_IDENTIFY 0xC0 /* not used */ diff --git a/include/status_led.h b/include/status_led.h index c85c206772..da9fae9203 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -72,22 +72,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** ETX_094 ********************************************************/ -#elif defined(CONFIG_ETX094) - -# define STATUS_LED_PAR im_ioport.iop_pdpar -# define STATUS_LED_DIR im_ioport.iop_pddir -# undef STATUS_LED_ODR -# define STATUS_LED_DAT im_ioport.iop_pddat - -# define STATUS_LED_BIT 0x00000001 -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** GEN860T *********************************************************/ #elif defined(CONFIG_GEN860T) @@ -170,26 +154,6 @@ void status_led_set (int led, int state); # define STATUS_LED_GREEN 1 # define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ -/***** LANTEC *********************************************************/ -#elif defined(CONFIG_LANTEC) - -# define STATUS_LED_PAR im_ioport.iop_pdpar -# define STATUS_LED_DIR im_ioport.iop_pddir -# undef STATUS_LED_ODR -# define STATUS_LED_DAT im_ioport.iop_pddat - -# if CONFIG_LATEC < 2 -# define STATUS_LED_BIT 0x1000 -# else -# define STATUS_LED_BIT 0x0800 -# endif -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** ICU862 ********************************************************/ #elif defined(CONFIG_ICU862) diff --git a/include/u-boot/zlib.h b/include/u-boot/zlib.h index b611fe7c79..e23ceb50ca 100644 --- a/include/u-boot/zlib.h +++ b/include/u-boot/zlib.h @@ -505,7 +505,7 @@ typedef gz_header FAR *gz_headerp; #define Z_DEFLATED 8 /* The deflate compression method (the only one supported in this version) */ -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ +#define Z_NULL (void *)0 /* for initializing zalloc, zfree, opaque */ /* basic functions */ diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d7627632d0..b7a79c0e0c 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -28,7 +28,7 @@ /* some reluctance to put this into a new limits.h, so it is here */ #define INT_MAX ((int)(~0U>>1)) -const char hex_asc[] = "0123456789abcdef"; +static const char hex_asc[] = "0123456789abcdef"; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -395,7 +395,7 @@ static char *string(char *buf, char *end, char *s, int field_width, { int len, i; - if (s == 0) + if (s == NULL) s = "<NULL>"; len = strnlen(s, precision); @@ -495,9 +495,15 @@ static char *ip4_addr_string(char *buf, char *end, u8 *addr, int field_width, static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags) { + /* + * Being a boot loader, we explicitly allow pointers to + * (physical) address null. + */ +#if 0 if (!ptr) return string(buf, end, "(null)", field_width, precision, flags); +#endif #ifdef CONFIG_CMD_NET switch (*fmt) { diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c index dc9480d92f..b468441d73 100644 --- a/lib/zlib/adler32.c +++ b/lib/zlib/adler32.c @@ -54,10 +54,7 @@ #endif /* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; +uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len) { unsigned long sum2; unsigned n; diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c index 38f2f905e8..0700e04cb9 100644 --- a/lib/zlib/inffast.c +++ b/lib/zlib/inffast.c @@ -66,9 +66,8 @@ requires strm->avail_out >= 258 for each loop to avoid checking for output space. */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ +void inflate_fast(z_streamp strm, unsigned start) +/* start: inflate()'s starting value for strm->avail_out */ { struct inflate_state FAR *state; unsigned char FAR *in; /* local strm->next_in */ diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c index 1eef609de5..6411c47932 100644 --- a/lib/zlib/inflate.c +++ b/lib/zlib/inflate.c @@ -5,8 +5,7 @@ local void fixedtables OF((struct inflate_state FAR *state)); local int updatewindow OF((z_streamp strm, unsigned out)); -int ZEXPORT inflateReset(strm) -z_streamp strm; +int ZEXPORT inflateReset(z_streamp strm) { struct inflate_state FAR *state; @@ -31,11 +30,8 @@ z_streamp strm; return Z_OK; } -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; +int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version, + int stream_size) { struct inflate_state FAR *state; @@ -74,16 +70,12 @@ int stream_size; return inflateReset(strm); } -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; +int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size) { return inflateInit2_(strm, DEF_WBITS, version, stream_size); } -local void fixedtables(state) -struct inflate_state FAR *state; +local void fixedtables(struct inflate_state FAR *state) { state->lencode = lenfix; state->lenbits = 9; @@ -105,9 +97,7 @@ struct inflate_state FAR *state; output will fall in the output data, making match copies simpler and faster. The advantage may be dependent on the size of the processor's data caches. */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; +local int updatewindow(z_streamp strm, unsigned out) { struct inflate_state FAR *state; unsigned copy, dist; @@ -335,9 +325,7 @@ unsigned out; when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it will return Z_BUF_ERROR if it has not reached the end of the stream. */ -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; +int ZEXPORT inflate(z_streamp strm, int flush) { struct inflate_state FAR *state; unsigned char FAR *next; /* next input */ @@ -938,8 +926,7 @@ int flush; return ret; } -int ZEXPORT inflateEnd(strm) -z_streamp strm; +int ZEXPORT inflateEnd(z_streamp strm) { struct inflate_state FAR *state; if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c index c6d4c038dc..7474a52e7f 100644 --- a/lib/zlib/inftrees.c +++ b/lib/zlib/inftrees.c @@ -29,13 +29,9 @@ table index bits. It will differ if the request is greater than the longest code or if it is less than the shortest code. */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; +int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes, + code FAR * FAR *table, unsigned FAR *bits, + unsigned short FAR *work) { unsigned len; /* a code's length in bits */ unsigned sym; /* index of code symbols */ diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c index 65f9554747..14f6eb1e07 100644 --- a/lib/zlib/zutil.c +++ b/lib/zlib/zutil.c @@ -49,10 +49,7 @@ extern voidp calloc OF((uInt items, uInt size)); extern void free OF((voidpf ptr)); #endif -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; +voidpf zcalloc(voidpf opaque, unsigned items, unsigned size) { if (opaque) items += size - size; /* make compiler happy */ @@ -60,10 +57,7 @@ voidpf zcalloc (opaque, items, size) (voidpf)calloc(items, size); } -void zcfree (opaque, ptr, nb) - voidpf opaque; - voidpf ptr; - unsigned nb; +void zcfree(voidpf opaque, voidpf ptr, unsigned nb) { free(ptr); if (opaque) @@ -27,15 +27,15 @@ #endif IPaddr_t NetArpWaitPacketIP; -IPaddr_t NetArpWaitReplyIP; +static IPaddr_t NetArpWaitReplyIP; /* MAC address of waiting packet's destination */ uchar *NetArpWaitPacketMAC; int NetArpWaitTxPacketSize; ulong NetArpWaitTimerStart; int NetArpWaitTry; -uchar *NetArpTxPacket; /* THE ARP transmit packet */ -uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN]; +static uchar *NetArpTxPacket; /* THE ARP transmit packet */ +static uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN]; void ArpInit(void) { diff --git a/net/bootp.c b/net/bootp.c index cd5c5dd1d7..4300f1c2f1 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -41,9 +41,9 @@ ulong BootpID; int BootpTry; #if defined(CONFIG_CMD_DHCP) -dhcp_state_t dhcp_state = INIT; -unsigned long dhcp_leasetime; -IPaddr_t NetDHCPServerIP; +static dhcp_state_t dhcp_state = INIT; +static unsigned long dhcp_leasetime; +static IPaddr_t NetDHCPServerIP; static void DhcpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, unsigned len); @@ -180,7 +180,7 @@ IPaddr_t NetNtpServerIP; int NetTimeOffset; #endif -uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN]; +static uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN]; /* Receive packet */ uchar *NetRxPackets[PKTBUFSRX]; diff --git a/net/ping.h b/net/ping.h index fd8d8d9778..8c71be4fdf 100644 --- a/net/ping.h +++ b/net/ping.h @@ -8,8 +8,6 @@ * Copyright 2000-2002 Wolfgang Denk, wd@denx.de */ -#if defined(CONFIG_CMD_PING) - #ifndef __PING_H__ #define __PING_H__ @@ -31,4 +29,3 @@ void ping_start(void); void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len); #endif /* __PING_H__ */ -#endif diff --git a/net/tftp.h b/net/tftp.h index 18e4c9c25d..2b686e3ca6 100644 --- a/net/tftp.h +++ b/net/tftp.h @@ -22,6 +22,9 @@ void TftpStart(enum proto_t protocol); /* Begin TFTP get/put */ extern void TftpStartServer(void); /* Wait for incoming TFTP put */ #endif +extern ulong TftpRRQTimeoutMSecs; +extern int TftpRRQTimeoutCountMax; + /**********************************************************************/ #endif /* __TFTP_H__ */ diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index fcbb30067e..728f7e0a44 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -381,49 +381,6 @@ static void scc_init (int scc_index) immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC | SCC_PSMR_NIB22 | SCC_PSMR_LPB; -#if 0 - /* - * Configure Ethernet TENA Signal - */ - -#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA)) - immr->im_ioport.iop_pcpar |= PC_ENET_TENA; - immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA)) - immr->im_cpm.cp_pbpar |= PB_ENET_TENA; - immr->im_cpm.cp_pbdir |= PB_ENET_TENA; -#else -#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined -#endif - -#if defined(CONFIG_ADS) && defined(CONFIG_MPC860) - /* - * Port C is used to control the PHY,MC68160. - */ - immr->im_ioport.iop_pcdir |= - (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL); - - immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL; - immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL); - *((uint *) BCSR1) &= ~BCSR1_ETHEN; -#endif /* MPC860ADS */ - -#if defined(CONFIG_AMX860) - /* - * Port B is used to control the PHY,MC68160. - */ - immr->im_cpm.cp_pbdir |= - (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL); - - immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL; - immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL); - - immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN; - immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN; -#endif /* AMX860 */ - -#endif /* 0 */ - #ifdef CONFIG_RPXCLASSIC *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); @@ -449,7 +406,7 @@ static void scc_init (int scc_index) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC) +#elif defined(CONFIG_RPXCLASSIC) udelay (100000); /* wait 100 ms */ #endif } diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index ad280cc46c..f7ee75a25f 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -30,8 +30,8 @@ import gitutil from series import Series # Tags that we detect and remove -re_remove = re.compile('^BUG=|^TEST=|^Change-Id:|^Review URL:' - '|Reviewed-on:|Reviewed-by:') +re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:' + '|Reviewed-on:|Reviewed-by:|Commit-Ready:') # Lines which are allowed after a TEST= line re_allowed_after_test = re.compile('^Signed-off-by:') |