diff options
| -rw-r--r-- | arch/arm/dts/exynos4210-trats.dts | 9 | ||||
| -rw-r--r-- | arch/arm/dts/exynos4412-odroid.dts | 2 | ||||
| -rw-r--r-- | arch/arm/dts/exynos4412-trats2.dts | 18 | ||||
| -rw-r--r-- | board/samsung/trats/trats.c | 249 | ||||
| -rw-r--r-- | board/samsung/trats2/trats2.c | 104 | ||||
| -rw-r--r-- | configs/trats2_defconfig | 4 | ||||
| -rw-r--r-- | configs/trats_defconfig | 4 |
7 files changed, 85 insertions, 305 deletions
diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts index 69c0605184..ac422e4fc4 100644 --- a/arch/arm/dts/exynos4210-trats.dts +++ b/arch/arm/dts/exynos4210-trats.dts @@ -23,6 +23,7 @@ console = "/serial@13820000"; mmc0 = "/sdhci@12510000"; mmc2 = "/sdhci@12530000"; + i2c8 = &i2c_fg; }; fimd@11c00000 { @@ -113,6 +114,14 @@ dwmmc@12550000 { status = "disabled"; }; + + i2c_fg: fuel-gauge { + compatible = "i2c-gpio"; + gpios = <&gpy4 1 0>, /* sda */ + <&gpy4 0 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + status = "okay"; + }; }; &i2c_5 { diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 188cb939bb..8710747e38 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -213,7 +213,7 @@ buck8_reg: BUCK8 { regulator-name = "VCC_P3V3_2.85V"; - regulator-min-microvolt = <2850000>; + regulator-min-microvolt = <750000>; regulator-max-microvolt = <3300000>; }; }; diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts index 1fbcf8914f..fd9e48c899 100644 --- a/arch/arm/dts/exynos4412-trats2.dts +++ b/arch/arm/dts/exynos4412-trats2.dts @@ -27,6 +27,8 @@ i2c5 = "/i2c@138b0000"; i2c6 = "/i2c@138c0000"; i2c7 = "/i2c@138d0000"; + i2c8 = &i2c_fg; + i2c9 = &i2c_max77693; serial0 = "/serial@13800000"; console = "/serial@13820000"; mmc0 = "/sdhci@12510000"; @@ -34,6 +36,22 @@ mshc0 = "/dwmmc@12550000"; }; + i2c_fg: fuel-gauge { + compatible = "i2c-gpio"; + gpios = <&gpf1 5 0>, /* sda */ + <&gpf1 4 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + status = "okay"; + }; + + i2c_max77693: max77693 { + compatible = "i2c-gpio"; + gpio = <&gpm2 0 0>, /* sda */ + <&gpm2 1 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + status = "okay"; + }; + i2c@138d0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 7200c2ee0b..00059a1317 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -23,6 +23,7 @@ #include <power/max8997_muic.h> #include <power/battery.h> #include <power/max17042_fg.h> +#include <power/pmic.h> #include <libtizen.h> #include <usb.h> #include <usb_mass_storage.h> @@ -51,26 +52,6 @@ int exynos_init(void) return 0; } -void i2c_init_board(void) -{ -#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ - int err; - - /* I2C_5 -> PMIC */ - err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE); - if (err) { - debug("I2C%d not configured\n", (I2C_5)); - return; - } - - /* I2C_8 -> FG */ - gpio_request(EXYNOS4_GPIO_Y40, "i2c_clk"); - gpio_request(EXYNOS4_GPIO_Y41, "i2c_data"); - gpio_direction_output(EXYNOS4_GPIO_Y40, 1); - gpio_direction_output(EXYNOS4_GPIO_Y41, 1); -#endif -} - #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ static void trats_low_power_mode(void) { @@ -129,156 +110,6 @@ static void trats_low_power_mode(void) writel(0x0, &clk->gate_ip_image); /* IMAGE */ writel(0x0, &clk->gate_ip_gps); /* GPS */ } - -static int pmic_init_max8997(void) -{ - struct pmic *p = pmic_get("MAX8997_PMIC"); - int i = 0, ret = 0; - u32 val; - - if (pmic_probe(p)) - return -1; - - /* BUCK1 VARM: 1.2V */ - val = (1200000 - 650000) / 25000; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val); - val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val); - - /* BUCK2 VINT: 1.1V */ - val = (1100000 - 650000) / 25000; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val); - val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val); - - - /* BUCK3 G3D: 1.1V - OFF */ - ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val); - val &= ~ENBUCK; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val); - - val = (1100000 - 750000) / 50000; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val); - - /* BUCK4 CAMISP: 1.2V - OFF */ - ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val); - val &= ~ENBUCK; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val); - - val = (1200000 - 650000) / 25000; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val); - - /* BUCK5 VMEM: 1.2V */ - val = (1200000 - 650000) / 25000; - for (i = 0; i < 8; i++) - ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val); - - val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val); - - /* BUCK6 CAM AF: 2.8V */ - /* No Voltage Setting Register */ - /* GNSLCT 3.0X */ - val = GNSLCT; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val); - - /* BUCK7 VCC_SUB: 2.0V */ - val = (2000000 - 750000) / 50000; - ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val); - - /* LDO1 VADC: 3.3V */ - val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val); - - /* LDO1 Disable active discharging */ - ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val); - val &= ~LDO_ADE; - ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val); - - /* LDO2 VALIVE: 1.1V */ - val = max8997_reg_ldo(1100000) | EN_LDO; - ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val); - - /* LDO3 VUSB/MIPI: 1.1V */ - val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val); - - /* LDO4 VMIPI: 1.8V */ - val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val); - - /* LDO5 VHSIC: 1.2V */ - val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val); - - /* LDO6 VCC_1.8V_PDA: 1.8V */ - val = max8997_reg_ldo(1800000) | EN_LDO; - ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val); - - /* LDO7 CAM_ISP: 1.8V */ - val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val); - - /* LDO8 VDAC/VUSB: 3.3V */ - val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val); - - /* LDO9 VCC_2.8V_PDA: 2.8V */ - val = max8997_reg_ldo(2800000) | EN_LDO; - ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val); - - /* LDO10 VPLL: 1.1V */ - val = max8997_reg_ldo(1100000) | EN_LDO; - ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val); - - /* LDO11 TOUCH: 2.8V */ - val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val); - - /* LDO12 VTCAM: 1.8V */ - val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val); - - /* LDO13 VCC_3.0_LCD: 3.0V */ - val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val); - - /* LDO14 MOTOR: 3.0V */ - val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val); - - /* LDO15 LED_A: 2.8V */ - val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val); - - /* LDO16 CAM_SENSOR: 1.8V */ - val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val); - - /* LDO17 VTF: 2.8V */ - val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val); - - /* LDO18 TOUCH_LED 3.3V */ - val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */ - ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val); - - /* LDO21 VDDQ: 1.2V */ - val = max8997_reg_ldo(1200000) | EN_LDO; - ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val); - - /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */ - val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) | - ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2; - ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val); - - if (ret) { - puts("MAX8997 PMIC setting error!\n"); - return -1; - } - - return 0; -} #endif int exynos_power_init(void) @@ -295,9 +126,7 @@ int exynos_power_init(void) * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected * to logical I2C adapter 1 */ - ret = pmic_init(I2C_5); - ret |= pmic_init_max8997(); - ret |= power_fg_init(I2C_9); + ret = power_fg_init(I2C_9); ret |= power_muic_init(I2C_5); ret |= power_bat_init(0); if (ret) @@ -391,39 +220,59 @@ static void check_hw_revision(void) #ifdef CONFIG_USB_GADGET static int s5pc210_phy_control(int on) { -#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ - int ret = 0; - u32 val = 0; - struct pmic *p = pmic_get("MAX8997_PMIC"); - if (!p) - return -ENODEV; + struct udevice *dev; + int reg, ret; - if (pmic_probe(p)) - return -1; + ret = pmic_get("max8997-pmic", &dev); + if (ret) + return ret; if (on) { - ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, - ENSAFEOUT1, LDO_ON); - ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); - ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val); - - ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); - ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val); + reg = pmic_reg_read(dev, MAX8997_REG_SAFEOUTCTRL); + reg |= ENSAFEOUT1; + ret = pmic_reg_write(dev, MAX8997_REG_SAFEOUTCTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } + reg = pmic_reg_read(dev, MAX8997_REG_LDO3CTRL); + reg |= EN_LDO; + ret = pmic_reg_write(dev, MAX8997_REG_LDO3CTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } + reg = pmic_reg_read(dev, MAX8997_REG_LDO8CTRL); + reg |= EN_LDO; + ret = pmic_reg_write(dev, MAX8997_REG_LDO8CTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } } else { - ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); - ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val); - - ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); - ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val); - ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, - ENSAFEOUT1, LDO_OFF); - } + reg = pmic_reg_read(dev, MAX8997_REG_LDO8CTRL); + reg &= DIS_LDO; + ret = pmic_reg_write(dev, MAX8997_REG_LDO8CTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } + reg = pmic_reg_read(dev, MAX8997_REG_LDO3CTRL); + reg &= DIS_LDO; + ret = pmic_reg_write(dev, MAX8997_REG_LDO3CTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } + reg = pmic_reg_read(dev, MAX8997_REG_SAFEOUTCTRL); + reg &= ~ENSAFEOUT1; + ret = pmic_reg_write(dev, MAX8997_REG_SAFEOUTCTRL, reg); + if (ret) { + puts("MAX8997 setting error!\n"); + return ret; + } - if (ret) { - puts("MAX8997 LDO setting error!\n"); - return -1; } -#endif return 0; } diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c index 150503ec15..f9acbd3571 100644 --- a/board/samsung/trats2/trats2.c +++ b/board/samsung/trats2/trats2.c @@ -100,50 +100,6 @@ static void board_external_gpio_init(void) gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */ } -#ifdef CONFIG_SYS_I2C_INIT_BOARD -static void board_init_i2c(void) -{ - int err; - - /* I2C_7 */ - err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE); - if (err) { - debug("I2C%d not configured\n", (I2C_7)); - return; - } - - /* I2C_8 */ - gpio_request(EXYNOS4X12_GPIO_F14, "i2c8_clk"); - gpio_request(EXYNOS4X12_GPIO_F15, "i2c8_data"); - gpio_direction_output(EXYNOS4X12_GPIO_F14, 1); - gpio_direction_output(EXYNOS4X12_GPIO_F15, 1); - - /* I2C_9 */ - gpio_request(EXYNOS4X12_GPIO_M21, "i2c9_clk"); - gpio_request(EXYNOS4X12_GPIO_M20, "i2c9_data"); - gpio_direction_output(EXYNOS4X12_GPIO_M21, 1); - gpio_direction_output(EXYNOS4X12_GPIO_M20, 1); -} -#endif - -#ifdef CONFIG_SYS_I2C_SOFT -int get_soft_i2c_scl_pin(void) -{ - if (I2C_ADAP_HWNR) - return EXYNOS4X12_GPIO_M21; /* I2C9 */ - else - return EXYNOS4X12_GPIO_F14; /* I2C8 */ -} - -int get_soft_i2c_sda_pin(void) -{ - if (I2C_ADAP_HWNR) - return EXYNOS4X12_GPIO_M20; /* I2C9 */ - else - return EXYNOS4X12_GPIO_F15; /* I2C8 */ -} -#endif - int exynos_early_init_f(void) { board_external_gpio_init(); @@ -179,11 +135,6 @@ int exynos_power_init(void) struct power_battery *pb; struct pmic *p_chrg, *p_muic, *p_fg, *p_bat; -#ifdef CONFIG_SYS_I2C_INIT_BOARD - board_init_i2c(); -#endif - pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */ - pmic_init_max77686(); pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */ power_muic_init(I2C_10); /* I2C adapter 10 - bus name soft1 */ power_fg_init(I2C_9); /* I2C adapter 9 - bus name soft0 */ @@ -331,61 +282,6 @@ int g_dnl_board_usb_cable_connected(void) } #endif -#ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */ -static int pmic_init_max77686(void) -{ - struct pmic *p = pmic_get("MAX77686_PMIC"); - - if (pmic_probe(p)) - return -1; - - /* BUCK/LDO Output Voltage */ - max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 VTF_2.8V */ - max77686_set_ldo_voltage(p, 23, 3300000); /* LDO23 TSP_AVDD_3.3V*/ - max77686_set_ldo_voltage(p, 24, 1800000); /* LDO24 TSP_VDD_1.8V */ - - /* BUCK/LDO Output Mode */ - max77686_set_buck_mode(p, 1, OPMODE_STANDBY); /* BUCK1 VMIF_1.1V_AP */ - max77686_set_buck_mode(p, 2, OPMODE_ON); /* BUCK2 VARM_1.0V_AP */ - max77686_set_buck_mode(p, 3, OPMODE_ON); /* BUCK3 VINT_1.0V_AP */ - max77686_set_buck_mode(p, 4, OPMODE_ON); /* BUCK4 VG3D_1.0V_AP */ - max77686_set_buck_mode(p, 5, OPMODE_ON); /* BUCK5 VMEM_1.2V_AP */ - max77686_set_buck_mode(p, 6, OPMODE_ON); /* BUCK6 VCC_SUB_1.35V*/ - max77686_set_buck_mode(p, 7, OPMODE_ON); /* BUCK7 VCC_SUB_2.0V */ - max77686_set_buck_mode(p, 8, OPMODE_OFF); /* VMEM_VDDF_2.85V */ - max77686_set_buck_mode(p, 9, OPMODE_OFF); /* CAM_ISP_CORE_1.2V*/ - - max77686_set_ldo_mode(p, 1, OPMODE_LPM); /* LDO1 VALIVE_1.0V_AP*/ - max77686_set_ldo_mode(p, 2, OPMODE_STANDBY); /* LDO2 VM1M2_1.2V_AP */ - max77686_set_ldo_mode(p, 3, OPMODE_LPM); /* LDO3 VCC_1.8V_AP */ - max77686_set_ldo_mode(p, 4, OPMODE_LPM); /* LDO4 VCC_2.8V_AP */ - max77686_set_ldo_mode(p, 5, OPMODE_OFF); /* LDO5_VCC_1.8V_IO */ - max77686_set_ldo_mode(p, 6, OPMODE_STANDBY); /* LDO6 VMPLL_1.0V_AP */ - max77686_set_ldo_mode(p, 7, OPMODE_STANDBY); /* LDO7 VPLL_1.0V_AP */ - max77686_set_ldo_mode(p, 8, OPMODE_LPM); /* LDO8 VMIPI_1.0V_AP */ - max77686_set_ldo_mode(p, 9, OPMODE_OFF); /* CAM_ISP_MIPI_1.2*/ - max77686_set_ldo_mode(p, 10, OPMODE_LPM); /* LDO10 VMIPI_1.8V_AP*/ - max77686_set_ldo_mode(p, 11, OPMODE_STANDBY); /* LDO11 VABB1_1.8V_AP*/ - max77686_set_ldo_mode(p, 12, OPMODE_LPM); /* LDO12 VUOTG_3.0V_AP*/ - max77686_set_ldo_mode(p, 13, OPMODE_OFF); /* LDO13 VC2C_1.8V_AP */ - max77686_set_ldo_mode(p, 14, OPMODE_STANDBY); /* VABB02_1.8V_AP */ - max77686_set_ldo_mode(p, 15, OPMODE_STANDBY); /* LDO15 VHSIC_1.0V_AP*/ - max77686_set_ldo_mode(p, 16, OPMODE_STANDBY); /* LDO16 VHSIC_1.8V_AP*/ - max77686_set_ldo_mode(p, 17, OPMODE_OFF); /* CAM_SENSOR_CORE_1.2*/ - max77686_set_ldo_mode(p, 18, OPMODE_OFF); /* CAM_ISP_SEN_IO_1.8V*/ - max77686_set_ldo_mode(p, 19, OPMODE_OFF); /* LDO19 VT_CAM_1.8V */ - max77686_set_ldo_mode(p, 20, OPMODE_ON); /* LDO20 VDDQ_PRE_1.8V*/ - max77686_set_ldo_mode(p, 21, OPMODE_OFF); /* LDO21 VTF_2.8V */ - max77686_set_ldo_mode(p, 22, OPMODE_OFF); /* LDO22 VMEM_VDD_2.8V*/ - max77686_set_ldo_mode(p, 23, OPMODE_OFF); /* LDO23 TSP_AVDD_3.3V*/ - max77686_set_ldo_mode(p, 24, OPMODE_OFF); /* LDO24 TSP_VDD_1.8V */ - max77686_set_ldo_mode(p, 25, OPMODE_OFF); /* LDO25 VCC_3.3V_LCD */ - max77686_set_ldo_mode(p, 26, OPMODE_OFF); /*LDO26 VCC_3.0V_MOTOR*/ - - return 0; -} -#endif - /* * LCD */ diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index ab76aa30cd..6f9bdb28f4 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -34,11 +34,15 @@ CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y +CONFIG_DM_I2C_GPIO=y CONFIG_DFU_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_S5P=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_MAX77686=y +CONFIG_SYS_I2C_S3C24X0=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y diff --git a/configs/trats_defconfig b/configs/trats_defconfig index 7fe6c3d7bb..23024fdd6d 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -34,10 +34,14 @@ CONFIG_CMD_FS_GENERIC=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_DFU_MMC=y +CONFIG_DM_I2C_GPIO=y CONFIG_MMC_DW=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SDMA=y CONFIG_MMC_SDHCI_S5P=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_MAX8997=y +CONFIG_SYS_I2C_S3C24X0=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_GADGET=y |