diff options
| -rw-r--r-- | arch/arm/dts/tegra186-p2771-0000-a02.dts | 19 | ||||
| -rw-r--r-- | arch/arm/dts/tegra186-p2771-0000-b00.dts | 19 | ||||
| -rw-r--r-- | board/nvidia/p2771-0000/p2771-0000.c | 22 | ||||
| -rw-r--r-- | configs/p2771-0000-a02_defconfig | 5 | ||||
| -rw-r--r-- | configs/p2771-0000-b00_defconfig | 5 | ||||
| -rw-r--r-- | include/configs/p2771-0000.h | 5 |
6 files changed, 75 insertions, 0 deletions
diff --git a/arch/arm/dts/tegra186-p2771-0000-a02.dts b/arch/arm/dts/tegra186-p2771-0000-a02.dts index 5ed3817a41c..36a3c21a55d 100644 --- a/arch/arm/dts/tegra186-p2771-0000-a02.dts +++ b/arch/arm/dts/tegra186-p2771-0000-a02.dts @@ -10,4 +10,23 @@ cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_LOW>; power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_HIGH>; }; + + pcie-controller@10003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + status = "disabled"; + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; }; diff --git a/arch/arm/dts/tegra186-p2771-0000-b00.dts b/arch/arm/dts/tegra186-p2771-0000-b00.dts index 90c99c33ccc..0f1d0e83e80 100644 --- a/arch/arm/dts/tegra186-p2771-0000-b00.dts +++ b/arch/arm/dts/tegra186-p2771-0000-b00.dts @@ -10,4 +10,23 @@ cd-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; power-gpios = <&gpio_main TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; }; + + pcie-controller@10003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + status = "disabled"; + nvidia,num-lanes = <0>; + }; + + pci@3,0 { + status = "disabled"; + nvidia,num-lanes = <1>; + }; + }; }; diff --git a/board/nvidia/p2771-0000/p2771-0000.c b/board/nvidia/p2771-0000/p2771-0000.c index 0c828a20054..529ed9d4547 100644 --- a/board/nvidia/p2771-0000/p2771-0000.c +++ b/board/nvidia/p2771-0000/p2771-0000.c @@ -31,3 +31,25 @@ int tegra_board_init(void) return 0; } + +int tegra_pcie_board_init(void) +{ + struct udevice *dev; + uchar val; + int ret; + + /* Turn on MAX77620 LDO7 to 1.05V for PEX power */ + debug("%s: Set LDO7 for PEX power to 1.05V\n", __func__); + ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev); + if (ret) { + printf("%s: Cannot find MAX77620 I2C chip\n", __func__); + return -1; + } + /* 0xC5 for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */ + val = 0xC5; + ret = dm_i2c_write(dev, MAX77620_CNFG1_L7_REG, &val, 1); + if (ret) + printf("i2c_write 0 0x3c 0x31 failed: %d\n", ret); + + return 0; +} diff --git a/configs/p2771-0000-a02_defconfig b/configs/p2771-0000-a02_defconfig index 404f7acf7ef..5ce369c6d33 100644 --- a/configs/p2771-0000-a02_defconfig +++ b/configs/p2771-0000-a02_defconfig @@ -26,7 +26,12 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_RTL8169=y +CONFIG_E1000=y +CONFIG_PCI_TEGRA=y CONFIG_TEGRA186_BPMP_I2C=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_POWER_DOMAIN=y +CONFIG_TEGRA186_POWER_DOMAIN=y diff --git a/configs/p2771-0000-b00_defconfig b/configs/p2771-0000-b00_defconfig index ad35c99bbbc..27393f3a5d4 100644 --- a/configs/p2771-0000-b00_defconfig +++ b/configs/p2771-0000-b00_defconfig @@ -26,7 +26,12 @@ CONFIG_CMD_EXT4=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y +CONFIG_RTL8169=y +CONFIG_E1000=y +CONFIG_PCI_TEGRA=y CONFIG_TEGRA186_BPMP_I2C=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_DM_USB=y +CONFIG_POWER_DOMAIN=y +CONFIG_TEGRA186_POWER_DOMAIN=y diff --git a/include/configs/p2771-0000.h b/include/configs/p2771-0000.h index 3ce72086ce9..1f64405f119 100644 --- a/include/configs/p2771-0000.h +++ b/include/configs/p2771-0000.h @@ -28,6 +28,11 @@ #define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) +/* PCI host support */ +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_CMD_PCI + #include "tegra-common-post.h" /* Crystal is 38.4MHz. clk_m runs at half that rate */ |