diff options
| -rw-r--r-- | CHANGELOG | 7 | ||||
| -rw-r--r-- | include/configs/RPXlite.h | 68 |
2 files changed, 36 insertions, 39 deletions
diff --git a/CHANGELOG b/CHANGELOG index e2730cf01ce..a1a768d5851 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,13 @@ Changes since U-Boot 1.1.4: ====================================================================== +* RPXlite configuration fixes + - Use correct flash sector size + - Use correct memory test end address + - Add support for bzip2 compression + - Various small fixes + Patch by Yuli Barcohen, 05 Jun 2005 + * Memory configuration changes for ZPC.1900 board - Fix SDRAM timing on both local bus and 60x bus - Add support for second flash bank (SIMM) diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 6b650310994..48ada0ed9b6 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -21,10 +21,6 @@ * MA 02111-1307 USA */ -/* - * board/config.h - configuration options, board specific - */ - /* Yoo. Jonghoon, IPone, yooth@ipone.co.kr * U-Boot port on RPXlite board */ @@ -53,8 +49,6 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND \ "bootp; " \ @@ -65,6 +59,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) @@ -86,12 +81,14 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0040000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_RESET_ADDRESS 0x09900000 -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -120,16 +117,14 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFC00000 -/*%%% #define CFG_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ #else -#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CFG_MONITOR_BASE 0xFFF00000 -/*%%% #define CFG_MONITOR_BASE CFG_FLASH_BASE */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ /* * For booting Linux, the board info and command line data @@ -147,9 +142,13 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_DIRECT_FLASH_TFTP + #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CONFIG_ENV_OVERWRITE /*----------------------------------------------------------------------- * Cache Configuration @@ -352,12 +351,12 @@ #define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ #define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ +#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ +#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ #define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ #define BCSR0_COLTEST 0x20 #define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 +#define BCSR0_ETHEN 0x80 #define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ #define BCSR1_PCVCTL6 0x02 @@ -371,22 +370,13 @@ #define BCSR2_USBSPD 0x40 #define BCSR2_USBSUSP 0x80 -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ +#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ +#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ #define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - - -/* - * Environment setting - */ - -#define CONFIG_ETHADDR 00:10:EC:00:1D:0B -#define CONFIG_IPADDR 192.168.1.65 -#define CONFIG_SERVERIP 192.168.1.27 +#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ +#define BCSR3_D27 0x10 /* Dip Switch settings */ +#define BCSR3_D26 0x20 +#define BCSR3_D25 0x40 +#define BCSR3_D24 0x80 #endif /* __CONFIG_H */ |