diff options
-rw-r--r-- | CHANGELOG | 16 | ||||
-rw-r--r-- | board/pm826/pm826.c | 39 | ||||
-rw-r--r-- | common/cmd_eeprom.c | 2 | ||||
-rw-r--r-- | cpu/mpc8260/ether_fcc.c | 135 | ||||
-rw-r--r-- | include/configs/PM826.h | 41 | ||||
-rw-r--r-- | include/configs/TQM823L.h | 2 | ||||
-rw-r--r-- | include/configs/TQM850L.h | 2 | ||||
-rw-r--r-- | include/configs/TQM855L.h | 2 | ||||
-rw-r--r-- | include/configs/TQM860L.h | 2 | ||||
-rw-r--r-- | include/net.h | 24 | ||||
-rw-r--r-- | net/eth.c | 2 |
11 files changed, 189 insertions, 78 deletions
diff --git a/CHANGELOG b/CHANGELOG index c369c23dbb4..a497468f2b6 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,5 +1,19 @@ ====================================================================== -Changes since U-Boot 0.2.0: +Changes since U-Boot 0.2.1: +====================================================================== + +* Add dual ethernet support on PM826 + +* Add support for LXT971 PHY on PM826 + +* Patch by Tord Andersson, 16 Jan 2003: + Fix flash sector count for TQM8xxL + +* Fix I2C EEPROM problem on ICU862 board (would only write the first + 16 bytes out of each 32 byte block) + +====================================================================== +Changes for U-Boot 0.2.1: ====================================================================== * Add support for V37 board diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c index c59b0284094..3ba8ca990de 100644 --- a/board/pm826/pm826.c +++ b/board/pm826/pm826.c @@ -72,20 +72,27 @@ const iop_conf_t iop_conf_tab[4][32] = { /* Port B configuration */ { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* PB31 */ - /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* PB30 */ - /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* PB29 */ + /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 TX_ER */ + /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RX_DV */ + /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 TX_EN */ +#if defined(CONFIG_ETHER_ON_SCC) && (CONFIG_ETHER_INDEX == 1) +#ifdef CONFIG_ETHER_ON_FCC2 +#error "SCC1 conflicts with FCC2" +#endif /* PB28 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 TXD */ - /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* PB27 */ - /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* PB26 */ - /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* PB25 */ - /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* PB24 */ - /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* PB23 */ - /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* PB22 */ - /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* PB21 */ - /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* PB20 */ - /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* PB19 */ - /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* PB18 */ +#else + /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RX_ER */ +#endif + /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 COL */ + /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 CRS */ + /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 TxD[3] */ + /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 TxD[2] */ + /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 TxD[1] */ + /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 TxD[0] */ + /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RxD[0] */ + /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RxD[1] */ + /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RxD[2] */ + /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RxD[3] */ /* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */ /* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */ /* PB15 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RXD */ @@ -119,9 +126,9 @@ const iop_conf_t iop_conf_tab[4][32] = { /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* PC23 */ /* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 TXCK */ /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXCK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* PC20 */ - /* PC19 */ { 0, 1, 0, 0, 0, 0 }, /* PC19 */ - /* PC18 */ { 0, 1, 0, 0, 0, 0 }, /* PC18 */ + /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 TXCK(2) */ + /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RXCK */ + /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 TXCK */ /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ /* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */ /* PC15 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */ diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index 29e9faf2b23..32bab1a8c0a 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -288,7 +288,7 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn */ contr_reg[0] = 0; for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) { - if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1) + if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 0) break; /* got ack */ #if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS) udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c index 01ddf5ccba4..bd2fcc927f5 100644 --- a/cpu/mpc8260/ether_fcc.c +++ b/cpu/mpc8260/ether_fcc.c @@ -40,40 +40,61 @@ */ #include <common.h> +#include <malloc.h> #include <asm/cpm_8260.h> #include <mpc8260.h> -#include <net.h> #include <command.h> #include <config.h> +#include <net.h> -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) - -/*---------------------------------------------------------------------*/ -#if (CONFIG_ETHER_INDEX == 1) - -#define PROFF_ENET PROFF_FCC1 -#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK -#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK -#define CPM_CR_ENET_PAGE CPM_CR_FCC1_PAGE - -/*---------------------------------------------------------------------*/ -#elif (CONFIG_ETHER_INDEX == 2) - -#define PROFF_ENET PROFF_FCC2 -#define CPM_CR_ENET_SBLOCK CPM_CR_FCC2_SBLOCK -#define CPM_CR_ENET_PAGE CPM_CR_FCC2_PAGE +#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \ + defined(CONFIG_NET_MULTI) -/*---------------------------------------------------------------------*/ -#elif (CONFIG_ETHER_INDEX == 3) +static struct ether_fcc_info_s +{ + int ether_index; + int proff_enet; + ulong cpm_cr_enet_sblock; + ulong cpm_cr_enet_page; + ulong cmxfcr_mask; + ulong cmxfcr_value; +} + ether_fcc_info[] = +{ +#ifdef CONFIG_ETHER_ON_FCC1 +{ + 0, + PROFF_FCC1, + CPM_CR_FCC1_SBLOCK, + CPM_CR_FCC1_PAGE, + CFG_CMXFCR_MASK1, + CFG_CMXFCR_VALUE1 +}, +#endif -#define PROFF_ENET PROFF_FCC3 -#define CPM_CR_ENET_SBLOCK CPM_CR_FCC3_SBLOCK -#define CPM_CR_ENET_PAGE CPM_CR_FCC3_PAGE +#ifdef CONFIG_ETHER_ON_FCC2 +{ + 1, + PROFF_FCC2, + CPM_CR_FCC2_SBLOCK, + CPM_CR_FCC2_PAGE, + CFG_CMXFCR_MASK2, + CFG_CMXFCR_VALUE2 +}, +#endif -/*---------------------------------------------------------------------*/ -#else -#error "FCC Ethernet not correctly defined" +#ifdef CONFIG_ETHER_ON_FCC3 +{ + 2, + PROFF_FCC3, + CPM_CR_FCC3_SBLOCK, + CPM_CR_FCC3_PAGE, + CFG_CMXFCR_MASK3, + CFG_CMXFCR_VALUE3 +}, #endif +}; + /*---------------------------------------------------------------------*/ /* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ @@ -116,7 +137,7 @@ static RTXBD rtx __attribute__ ((aligned(8))); #error "rtx must be 64-bit aligned" #endif -int eth_send(volatile void *packet, int length) +static int fec_send(struct eth_device* dev, volatile void *packet, int length) { int i; int result = 0; @@ -156,7 +177,7 @@ out: return result; } -int eth_rx(void) +static int fec_recv(struct eth_device* dev) { int length; @@ -194,8 +215,9 @@ int eth_rx(void) } -int eth_init(bd_t *bis) +static int fec_init(struct eth_device* dev, bd_t *bis) { + struct ether_fcc_info_s * info = dev->priv; int i; volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile cpm8260_t *cp = &(immr->im_cpm); @@ -210,18 +232,18 @@ int eth_init(bd_t *bis) /* 28.9 - (3): connect FCC's tx and rx clocks */ immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~CFG_CMXFCR_MASK) | - CFG_CMXFCR_VALUE; + immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) | + info->cmxfcr_value; /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr = + immr->im_fcc[info->ether_index].fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC; + immr->im_fcc[info->ether_index].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC; /* 28.9 - (6): FDSR: Ethernet Syn */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fdsr = 0xD555; + immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555; /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ rxIdx = 0; @@ -246,7 +268,7 @@ int eth_init(bd_t *bis) rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; /* 28.9 - (7): initialise parameter ram */ - pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[PROFF_ENET]); + pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]); /* clear whole structure to make sure all reserved fields are zero */ memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); @@ -259,7 +281,7 @@ int eth_init(bd_t *bis) * can do this. Later, we will add resource management for * this area. */ - mem_addr = CPM_FCC_SPECIAL_BASE + ((CONFIG_ETHER_INDEX-1) * 64); + mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64); pram_ptr->fen_genfcc.fcc_riptr = mem_addr; pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; /* @@ -288,7 +310,7 @@ int eth_init(bd_t *bis) * it unique by setting a few bits in the upper byte of the * non-static part of the address. */ -#define ea bis->bi_enetaddr +#define ea eth_get_dev()->enetaddr pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; @@ -308,10 +330,10 @@ int eth_init(bd_t *bis) #endif /* 28.9 - (8): clear out events in FCCE */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fcce = ~0x0; + immr->im_fcc[info->ether_index].fcc_fcce = ~0x0; /* 28.9 - (9): FCCM: mask all events */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fccm = 0; + immr->im_fcc[info->ether_index].fcc_fccm = 0; /* 28.9 - (10-12): we don't use ethernet interrupts */ @@ -321,8 +343,8 @@ int eth_init(bd_t *bis) * than the manual describes because we have just now finished * the BD initialization. */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE, - CPM_CR_ENET_SBLOCK, + cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page, + info->cpm_cr_enet_sblock, 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG; do { @@ -330,18 +352,43 @@ int eth_init(bd_t *bis) } while (cp->cp_cpcr & CPM_CR_FLG); /* 28.9 - (14): enable tx/rx in gfmr */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; + immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; return 1; } -void eth_halt(void) +static void fec_halt(struct eth_device* dev) { + struct ether_fcc_info_s * info = dev->priv; volatile immap_t *immr = (immap_t *)CFG_IMMR; /* write GFMR: disable tx/rx */ - immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr &= + immr->im_fcc[info->ether_index].fcc_gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR); } -#endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET */ +int fec_initialize(bd_t *bis) +{ + struct eth_device* dev; + int i; + + for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) + { + dev = (struct eth_device*) malloc(sizeof *dev); + memset(dev, 0, sizeof *dev); + + sprintf(dev->name, "FCC%d ETHERNET", + ether_fcc_info[i].ether_index + 1); + dev->priv = ðer_fcc_info[i]; + dev->init = fec_init; + dev->halt = fec_halt; + dev->send = fec_send; + dev->recv = fec_recv; + + eth_register(dev); + } + + return 1; +} + +#endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET && CONFIG_NET_MULTI */ diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 13d7632700a..b56da695e82 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -38,6 +38,8 @@ #define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ #define CONFIG_PM826 1 /* ...on a PM8260 module */ +#undef CONFIG_DB_CR826_J30x_ON /* J30x jumpers on D.B. carrier */ + #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ @@ -93,33 +95,50 @@ /* * select ethernet configuration * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) + * if CONFIG_ETHER_ON_SCC is selected, then + * - CONFIG_ETHER_INDEX must be set to the channel number (1-4) + * - CONFIG_NET_MULTI must not be defined + * + * if CONFIG_ETHER_ON_FCC is selected, then + * - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected + * - CONFIG_NET_MULTI must be defined * * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be * defined elsewhere (as for the console), or CFG_CMD_NET must be removed * from CONFIG_COMMANDS to remove support for networking. */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ +#define CONFIG_NET_MULTI #undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ -#if (CONFIG_ETHER_INDEX == 1) +#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ +#define CONFIG_ETHER_INDEX 1 /* which SCC channel for ethernet */ + +#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ /* * - Rx-CLK is CLK11 * - Tx-CLK is CLK10 + */ +#define CONFIG_ETHER_ON_FCC1 +# define CFG_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) +#ifndef CONFIG_DB_CR826_J30x_ON +# define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10) +#else +# define CFG_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12) +#endif +/* + * - Rx-CLK is CLK15 + * - Tx-CLK is CLK14 + */ +#define CONFIG_ETHER_ON_FCC2 +# define CFG_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) +# define CFG_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) +/* * - RAM for BD/Buffers is on the 60x Bus (see 28-13) * - Enable Full Duplex in FSMR */ -# define CFG_CMXFCR_MASK (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10) # define CFG_CPMFCR_RAMTYPE 0 # define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) -#endif /* CONFIG_ETHER_INDEX */ - /* system clock rate (CLKIN) - equal to the 60x and local bus speed */ #define CONFIG_8260_CLKIN 64000000 /* in Hz */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index bff0cece07d..68363268280 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -178,7 +178,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index a326375ec14..71e08ce817c 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -170,7 +170,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index f204e01bdd7..ac0e28a15e9 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -170,7 +170,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index dc5eb3cb565..5564b2310e7 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -170,7 +170,7 @@ * FLASH organization */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ diff --git a/include/net.h b/include/net.h index 396f36e6df7..b4106fe5eb7 100644 --- a/include/net.h +++ b/include/net.h @@ -18,6 +18,30 @@ #define CONFIG_NET_MULTI #endif #endif + +#if !defined(CONFIG_NET_MULTI) && defined(CONFIG_8260) +#include <config.h> +#if defined(CONFIG_ETHER_ON_FCC) +#if defined(CONFIG_ETHER_ON_SCC) +#error "Ethernet not correctly defined" +#endif /* CONFIG_ETHER_ON_SCC */ +#define CONFIG_NET_MULTI +#if (CONFIG_ETHER_INDEX == 1) +#define CONFIG_ETHER_ON_FCC1 +# define CFG_CMXFCR_MASK1 CFG_CMXFCR_MASK +# define CFG_CMXFCR_VALUE1 CFG_CMXFCR_VALUE +#elif (CONFIG_ETHER_INDEX == 2) +#define CONFIG_ETHER_ON_FCC2 +# define CFG_CMXFCR_MASK2 CFG_CMXFCR_MASK +# define CFG_CMXFCR_VALUE2 CFG_CMXFCR_VALUE +#elif (CONFIG_ETHER_INDEX == 3) +#define CONFIG_ETHER_ON_FCC3 +# define CFG_CMXFCR_MASK3 CFG_CMXFCR_MASK +# define CFG_CMXFCR_VALUE3 CFG_CMXFCR_VALUE +#endif /* CONFIG_ETHER_INDEX */ +#endif /* CONFIG_ETHER_ON_FCC */ +#endif /* !CONFIG_NET_MULTI && CONFIG_8260 */ + #include <asm/byteorder.h> /* for nton* / ntoh* stuff */ diff --git a/net/eth.c b/net/eth.c index cb394337c8c..47699f1f0b6 100644 --- a/net/eth.c +++ b/net/eth.c @@ -119,7 +119,7 @@ int eth_initialize(bd_t *bis) #ifdef SCC_ENET scc_initialize(bis); #endif -#ifdef FEC_ENET +#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC) fec_initialize(bis); #endif |