summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG23
-rw-r--r--CREDITS5
-rw-r--r--MAINTAINERS4
-rw-r--r--MAKEALL30
-rw-r--r--Makefile34
-rw-r--r--README6
-rw-r--r--board/LEOX/elpt860/Makefile47
-rw-r--r--board/LEOX/elpt860/README.LEOX424
-rw-r--r--board/LEOX/elpt860/config.mk36
-rw-r--r--board/LEOX/elpt860/elpt860.c399
-rw-r--r--board/LEOX/elpt860/flash.c615
-rw-r--r--board/LEOX/elpt860/u-boot.lds146
-rw-r--r--board/LEOX/elpt860/u-boot.lds.debug140
-rw-r--r--board/cpc45/Makefile40
-rw-r--r--board/cpc45/config.mk36
-rw-r--r--board/cpc45/cpc45.c173
-rw-r--r--board/cpc45/flash.c493
-rw-r--r--board/cpc45/plx9030.c174
-rw-r--r--board/cpc45/u-boot.lds128
-rw-r--r--board/cu824/cu824.c10
-rw-r--r--board/emk/top860/config.mk24
-rw-r--r--board/innokom/flash.c109
-rw-r--r--board/ip860/ip860.c111
-rw-r--r--board/pm826/config.mk4
-rw-r--r--board/trab/flash.c9
-rw-r--r--board/trab/vfd.c42
-rw-r--r--board/v37/flash.c2
-rw-r--r--board/v37/v37.c2
-rw-r--r--common/cmd_fdos.c2
-rw-r--r--common/cmd_jffs2.c2
-rw-r--r--common/main.c4
-rw-r--r--cpu/mpc8xx/cpu_init.c2
-rw-r--r--doc/README-i3868
-rw-r--r--doc/README.IPHASE45396
-rw-r--r--include/asm-i386/u-boot-i386.h (renamed from include/asm-i386/ppcboot-i386.h)6
-rw-r--r--include/common.h2
-rw-r--r--include/commproc.h26
-rw-r--r--include/configs/CPC45.h448
-rw-r--r--include/configs/CPU86.h6
-rw-r--r--include/configs/CU824.h6
-rw-r--r--include/configs/ELPT860.h390
-rw-r--r--include/configs/IP860.h14
-rw-r--r--include/configs/PM826.h14
-rw-r--r--include/configs/PN62.h2
-rw-r--r--include/configs/RRvision.h2
-rw-r--r--include/configs/SPD823TS.h2
-rw-r--r--include/configs/TQM823L.h2
-rw-r--r--include/configs/TQM850L.h2
-rw-r--r--include/configs/TQM855L.h2
-rw-r--r--include/configs/TQM860L.h2
-rw-r--r--include/configs/lwmon.h2
-rw-r--r--lib_ppc/board.c10
-rw-r--r--rtc/Makefile2
-rw-r--r--rtc/ds164x.c200
-rw-r--r--tools/env/fw_env_main.c2
55 files changed, 4249 insertions, 183 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 81fc0729e3..1b36b41a40 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,11 +2,32 @@
Changes since U-Boot 0.2.2:
======================================================================
+* Patch by Josef Wagner, 12 Mar 2003:
+ - 16/32 MB and 50/80 MHz support with auto-detection for IP860
+ - ETH05 and BEDBUG support for CU824
+ - added support for MicroSys CPC45
+ - new BOOTROM/FLASH0 and DOC base for PM826
+
+* Patch by Robert Schwebel, 12 Mar 2003:
+ Fix the chpart command on innokom board
+
+* Name cleanup:
+ mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
+ s/PPCBoot/U-Boot/ in some files
+ s/pImage/uImage/ in some files
+
+* Patch by Detlev Zundel, 15 Jan 2003:
+ Fix '' command line quoting
+
+* Patch by The LEOX team, 19 Jan 2003:
+ - add support for the ELPT860 board
+ - add support for Dallas ds164x RTC
+
* Patches by David Müller, 31 Jan 2003:
- minimal setup for CardBus bridges
- add EEPROM read/write support in the CS8900 driver
- add support for the builtin I2C controller in the Samsung s3c24x0 chips
- - add support for MPL's VCMA9 (Samsung s3c2410 based) board
+ - add support for MPL's VCMA9 (Samsung s3c2410 based) board
* Patch by Steven Scholz, 04 Feb 2003:
add support for RTC DS1307
diff --git a/CREDITS b/CREDITS
index 77e609eda4..976044b7de 100644
--- a/CREDITS
+++ b/CREDITS
@@ -166,6 +166,11 @@ N: Thomas Lange
E: thomas@corelatus.com
D: Support for GTH board; lots of PCMCIA fixes
+N: The LEOX team
+E: team@leox.org
+D: Support for LEOX boards, DS164x RTC
+W: http://www.leox.org
+
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
diff --git a/MAINTAINERS b/MAINTAINERS
index a673cdcb64..292a290978 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -137,6 +137,10 @@ Thomas Lange <thomas@corelatus.com>
GTH MPC860
+The LEOX team <team@leox.org>
+
+ ELPT860 MPC860T
+
Eran Man <eran@nbase.co.il>
EVB64260_750CX MPC750CX
diff --git a/MAKEALL b/MAKEALL
index 45e44e723b..37d6c73219 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -16,18 +16,18 @@ LIST=""
LIST_8xx=" \
ADS860 AMX860 c2mon CCM \
- cogent_mpc8xx ESTEEM192E ETX094 FADS823 \
- FADS850SAR FADS860T FLAGADM FPS850L \
- GEN860T GENIETV GTH hermes \
- IAD210 ICU862_100MHz IP860 IVML24 \
- IVML24_128 IVML24_256 IVMS8 IVMS8_128 \
- IVMS8_256 KUP4K LANTEC lwmon \
- MBX MBX860T MHPC MVS1 \
- NETVIA NX823 pcu_e R360MPI \
- RPXClassic RPXlite RRvision SM850 \
- SPD823TS SXNI855T TOP860 TQM823L \
- TQM823L_LCD TQM850L TQM855L TQM860L \
- TQM860L_FEC TTTech v37 \
+ cogent_mpc8xx ESTEEM192E ETX094 ELPT860 \
+ FADS823 FADS850SAR FADS860T FLAGADM \
+ FPS850L GEN860T GENIETV GTH \
+ hermes IAD210 ICU862_100MHz IP860 \
+ IVML24 IVML24_128 IVML24_256 IVMS8 \
+ IVMS8_128 IVMS8_256 KUP4K LANTEC \
+ lwmon MBX MBX860T MHPC \
+ MVS1 NETVIA NX823 pcu_e \
+ R360MPI RPXClassic RPXlite RRvision \
+ SM850 SPD823TS SXNI855T TOP860 \
+ TQM823L TQM823L_LCD TQM850L TQM855L \
+ TQM860L TQM860L_FEC TTTech v37 \
"
#########################################################################
@@ -48,9 +48,9 @@ LIST_4xx=" \
#########################################################################
LIST_824x=" \
- BMW CU824 MOUSSE MUSENKI \
- OXC PN62 Sandpoint8240 Sandpoint8245 \
- utx8245 \
+ BMW CPC45 CU824 MOUSSE \
+ MUSENKI OXC PN62 Sandpoint8240 \
+ Sandpoint8245 utx8245 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index e77a747508..6e6a44d334 100644
--- a/Makefile
+++ b/Makefile
@@ -53,21 +53,6 @@ ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
else
-## #ifeq ($(CPU),mpc8xx)
-## CROSS_COMPILE = ppc_8xx-
-## #endif
-## #ifeq ($(CPU),ppc4xx)
-## #CROSS_COMPILE = ppc_4xx-
-## #endif
-## #ifeq ($(CPU),mpc824x)
-## #CROSS_COMPILE = ppc_82xx-
-## #endif
-## #ifeq ($(CPU),mpc8260)
-## #CROSS_COMPILE = ppc_82xx-
-## #endif
-## #ifeq ($(CPU),74xx_7xx)
-## #CROSS_COMPILE = ppc_74xx-)
-## #endif
ifeq ($(ARCH),ppc)
CROSS_COMPILE = ppc_8xx-
endif
@@ -202,6 +187,9 @@ CCM_config: unconfig
cogent_mpc8xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx cogent
+ELPT860_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+
ESTEEM192E_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx esteem192e
@@ -457,9 +445,24 @@ WALNUT405_config:unconfig
#########################################################################
## MPC824x Systems
#########################################################################
+xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
+CPC45_config \
+CPC45_ROMBOOT_config: unconfig
+ @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
+ @cd ./include ; \
+ if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+ echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+ echo "... booting from 8-bit flash" ; \
+ else \
+ echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+ echo "... booting from 64-bit flash" ; \
+ fi; \
+ echo "export CONFIG_BOOT_ROM" >> config.mk;
+
CU824_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x cu824
@@ -487,7 +490,6 @@ utx8245_config: unconfig
#########################################################################
## MPC8260 Systems
#########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
cogent_mpc8260_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 cogent
diff --git a/README b/README
index 0539d427d2..d70d2af29a 100644
--- a/README
+++ b/README
@@ -145,6 +145,8 @@ Directory Hierarchy:
- cpu/mpc8260 Files specific to Motorola MPC8260 CPU
- cpu/ppc4xx Files specific to IBM 4xx CPUs
+- board/LEOX/ Files specific to boards manufactured by The LEOX team
+- board/LEOX/elpt860 Files specific to ELPT860 boards
- board/RPXClassic
Files specific to RPXClassic boards
- board/RPXlite Files specific to RPXlite boards
@@ -338,7 +340,7 @@ The following options need to be configured:
CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto,
CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260,
CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L,
- CONFIG_V37
+ CONFIG_V37, CONFIG_ELPT860
ARM based boards:
-----------------
@@ -626,6 +628,7 @@ The following options need to be configured:
CONFIG_RTC_MC146818 - use MC146818 RTC
CONFIG_RTC_DS1307 - use Maxim, Inc. DS1307 RTC
CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC
+ CONFIG_RTC_DS164x - use Dallas DS164x RTC
- Timestamp Support:
@@ -1716,6 +1719,7 @@ configurations; the following names are supported:
FPS850L_config Sandpoint8240_config sbc8260_config
GENIETV_config TQM823L_config PIP405_config
GEN860T_config EBONY_config FPS860L_config
+ ELPT860_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile
new file mode 100644
index 0000000000..abca765d72
--- /dev/null
+++ b/board/LEOX/elpt860/Makefile
@@ -0,0 +1,47 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+# for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX
new file mode 100644
index 0000000000..9ace97b3e8
--- /dev/null
+++ b/board/LEOX/elpt860/README.LEOX
@@ -0,0 +1,424 @@
+=============================================================================
+
+ U-Boot port on the LEOX's ELPT860 CPU board
+ -------------------------------------------
+
+LEOX.org is about the development of free hardware and software resources
+ for system on chip.
+
+For more information, contact The LEOX team <team@leox.org>
+
+References:
+~~~~~~~~~~
+ 1) Get the last stable release from denx.de:
+ o ftp://ftp.denx.de/pub/u-boot/u-boot-0.2.0.tar.bz2
+ 2) Get the current CVS snapshot:
+ o cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+ o cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
+
+=============================================================================
+
+The ELPT860 CPU board has the following features:
+
+Processor: - MPC860T @ 50MHz
+ - PowerPC Core
+ - 65 MIPS
+ - Caches: D->4KB, I->4KB
+ - CPM: 4 SCCs, 2 SMCs
+ - Ethernet 10/100
+ - SPI, I2C, PCMCIA, Parallel
+
+CPU board: - DRAM: 16 MB
+ - FLASH: 512 KB + (2 * 4 MB)
+ - NVRAM: 128 KB
+ - 1 Serial link
+ - 2 Ethernet 10 BaseT Channels
+
+On power-up the processor jumps to the address of 0x02000100
+
+Thus, U-Boot is configured to reside in flash starting at the address of
+0x02001000. The environment space is located in NVRAM separately from
+U-Boot, at the address of 0x03000000.
+
+=============================================================================
+
+ U-Boot test results
+
+=============================================================================
+
+
+##################################################
+# Operation on the serial console (SMC1)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+ *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM: 16 MB
+FLASH: 512 kB
+In: serial
+Out: serial
+Err: serial
+Net: SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot: 0
+LEOX_elpt860: help
+askenv - get environment variables from stdin
+autoscr - run script from memory
+base - print or set address offset
+bdinfo - print Board Info structure
+bootm - boot application image from memory
+bootp - boot image via network using BootP/TFTP protocol
+bootd - boot default, i.e., run 'bootcmd'
+cmp - memory compare
+coninfo - print console devices and informations
+cp - memory copy
+crc32 - checksum calculation
+echo - echo args to console
+erase - erase FLASH memory
+flinfo - print FLASH memory information
+go - start application at address 'addr'
+help - print online help
+iminfo - print header information for application image
+loadb - load binary file over serial line (kermit mode)
+loads - load S-Record file over serial line
+loop - infinite loop on address range
+md - memory display
+mm - memory modify (auto-incrementing)
+mtest - simple RAM test
+mw - memory write (fill)
+nm - memory modify (constant address)
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+rarpboot- boot image via network using RARP/TFTP protocol
+reset - Perform RESET of the CPU
+run - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv - set environment variables
+sleep - delay execution for some time
+tftpboot- boot image via network using TFTP protocol
+ and env variables ipaddr and serverip
+version - print monitor version
+? - alias for 'help'
+
+##################################################
+# Environment Variables (CFG_ENV_IS_IN_NVRAM)
+##############################
+
+LEOX_elpt860: printenv
+bootdelay=5
+loads_echo=1
+baudrate=9600
+stdin=serial
+stdout=serial
+stderr=serial
+ethaddr=00:03:ca:00:64:df
+ipaddr=192.168.0.30
+netmask=255.255.255.0
+serverip=192.168.0.1
+nfsserverip=192.168.0.1
+preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
+gatewayip=192.168.0.1
+ramargs=setenv bootargs root=/dev/ram rw
+rootargs=setenv rootpath /tftp/$(ipaddr)
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
+addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
+nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
+bootcmd=run ramboot
+clocks_in_mhz=1
+
+Environment size: 730/16380 bytes
+
+##################################################
+# Flash Memory Information
+##############################
+
+LEOX_elpt860: flinfo
+
+Bank # 1: AMD AM29F040 (4 Mbits)
+ Size: 512 KB in 8 Sectors
+ Sector Start Addresses:
+ 02000000 (RO) 02010000 (RO) 02020000 (RO) 02030000 (RO) 02040000
+ 02050000 02060000 02070000
+
+##################################################
+# Board Information Structure
+##############################
+
+LEOX_elpt860: bdinfo
+memstart = 0x00000000
+memsize = 0x01000000
+flashstart = 0x02000000
+flashsize = 0x00080000
+flashoffset = 0x00030000
+sramstart = 0x00000000
+sramsize = 0x00000000
+immr_base = 0xFF000000
+bootflags = 0x00000001
+intfreq = 50 MHz
+busfreq = 50 MHz
+ethaddr = 00:03:ca:00:64:df
+IP addr = 192.168.0.30
+baudrate = 9600 bps
+
+##################################################
+# Image Download and run over serial port
+# hello_world (S-Record image)
+# ===> 1) Enter "loads" command into U-Boot monitor
+# ===> 2) From TeraTerm's bar menu, Select 'File/Send file...'
+# Then select 'hello_world.srec' with the file browser
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+ *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM: 16 MB
+FLASH: 512 kB
+In: serial
+Out: serial
+Err: serial
+Net: SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot: 0
+LEOX_elpt860: loads
+## Ready for S-Record download ...
+S804040004F3050154000501709905014C000501388D
+## First Load Addr = 0x00040000
+## Last Load Addr = 0x0005018B
+## Total Size = 0x0001018C = 65932 Bytes
+## Start Addr = 0x00040004
+LEOX_elpt860: go 40004 This is a test !!!
+## Starting application at 0x00040004 ...
+Hello World
+argc = 6
+argv[0] = "40004"
+argv[1] = "This"
+argv[2] = "is"
+argv[3] = "a"
+argv[4] = "test"
+argv[5] = "!!!"
+argv[6] = "<NULL>"
+Hit any key to exit ...
+
+## Application terminated, rc = 0x0
+
+##################################################
+# Image download and run over ethernet interface
+# Linux-2.4.4 (uImage) + Root filesystem mounted over NFS
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+ *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM: 16 MB
+FLASH: 512 kB
+In: serial
+Out: serial
+Err: serial
+Net: SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot: 0
+LEOX_elpt860: run nfsboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/uImage'.
+Load address: 0x400000
+Loading: #################################################################
+ #############################
+done
+Bytes transferred = 477294 (7486e hex)
+## Booting image at 00400000 ...
+ Image Name: Linux-2.4.4
+ Image Type: PowerPC Linux Kernel Image (gzip compressed)
+ Data Size: 477230 Bytes = 466 kB = 0 MB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Verifying Checksum ... OK
+ Uncompressing Kernel Image ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/nfs rw nfsroot=192.168.0.1:/tftp/192.168.0.30 ip=192.168.0.30:192.168.0.1:192.168.0.1:255.255.255.0::eth0:
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 14720k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 9701kB/3233kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+Looking up port of RPC 100003/2 on 192.168.0.1
+Looking up port of RPC 100005/2 on 192.168.0.1
+VFS: Mounted root (nfs filesystem).
+Freeing unused kernel memory: 44k init
+INIT: version 2.78 booting
+ Welcome to DENX Embedded Linux Environment
+ Press 'I' to enter interactive startup.
+Mounting proc filesystem: [ OK ]
+Configuring kernel parameters: [ OK ]
+Cannot access the Hardware Clock via any known method.
+Use the --debug option to see the details of our search for an access method.
+Setting clock : Wed Dec 31 19:00:11 EST 1969 [ OK ]
+Activating swap partitions: [ OK ]
+Setting hostname 192.168.0.30: [ OK ]
+Finding module dependencies:
+[ OK ]
+Checking filesystems
+Checking all file systems.
+[ OK ]
+Mounting local filesystems: [ OK ]
+Enabling swap space: [ OK ]
+INIT: Entering runlevel: 3
+Entering non-interactive startup
+Starting system logger: [ OK ]
+Starting kernel logger: [ OK ]
+Starting xinetd: [ OK ]
+
+192 login: root
+Last login: Wed Dec 31 19:00:41 on ttyS0
+bash-2.04#
+
+##################################################
+# Image download and run over ethernet interface
+# Linux-2.4.4 + Root filesystem mounted from RAM (pMulti)
+##############################
+
+U-Boot 0.2.2 (Jan 19 2003 - 11:08:39)
+
+CPU: XPC860xxZPnnB at 50 MHz: 4 kB I-Cache 4 kB D-Cache FEC present
+ *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
+Board: ### No HW ID - assuming ELPT860
+DRAM: 16 MB
+FLASH: 512 kB
+In: serial
+Out: serial
+Err: serial
+Net: SCC ETHERNET
+
+Type "run nfsboot" to mount root filesystem over NFS
+
+Hit any key to stop autoboot: 0
+LEOX_elpt860: run ramboot
+ARP broadcast 1
+TFTP from server 192.168.0.1; our IP address is 192.168.0.30
+Filename '/home/leox/pMulti'.
+Load address: 0x400000
+Loading: #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ #################################################################
+ ########################################################
+done
+Bytes transferred = 1947816 (1db8a8 hex)
+## Booting image at 00400000 ...
+ Image Name: linux-2.4.4-2002-03-21 Multiboot
+ Image Type: PowerPC Linux Multi-File Image (gzip compressed)
+ Data Size: 1947752 Bytes = 1902 kB = 1 MB
+ Load Address: 00000000
+ Entry Point: 00000000
+ Contents:
+ Image 0: 477230 Bytes = 466 kB = 0 MB
+ Image 1: 1470508 Bytes = 1436 kB = 1 MB
+ Verifying Checksum ... OK
+ Uncompressing Multi-File Image ... OK
+ Loading Ramdisk to 00e44000, end 00fab02c ... OK
+Linux version 2.4.4-rthal5 (leox@p5ak6650) (gcc version 2.95.3 20010315 (release/MontaVista)) #1 Wed Jul 3 10:23:53 CEST 2002
+On node 0 totalpages: 4096
+zone(0): 4096 pages.
+zone(1): 0 pages.
+zone(2): 0 pages.
+Kernel command line: root=/dev/ram rw
+rtsched version <20010618.1050.24>
+Decrementer Frequency: 3125000
+Warning: real time clock seems stuck!
+Calibrating delay loop... 49.76 BogoMIPS
+Memory: 13280k available (928k kernel code, 384k data, 44k init, 0k highmem)
+Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
+Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
+Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
+POSIX conformance testing by UNIFIX
+Linux NET4.0 for Linux 2.4
+Based upon Swansea University Computer Society NET3.039
+Starting kswapd v1.8
+CPM UART driver version 0.03
+ttyS0 on SMC1 at 0x0280, BRG1
+block: queued sectors max/low 8741kB/2913kB, 64 slots per queue
+RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
+eth0: CPM ENET Version 0.2 on SCC1, 00:03:ca:00:64:df
+RAMDISK: Compressed image found at block 0
+Freeing initrd memory: 1436k freed
+NET4: Linux TCP/IP 1.0 for NET4.0
+IP Protocols: ICMP, UDP, TCP
+IP: routing cache hash table of 512 buckets, 4Kbytes
+TCP: Hash tables configured (established 1024 bind 1024)
+IP-Config: Incomplete network configuration information.
+NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
+VFS: Mounted root (ext2 filesystem).
+Freeing unused kernel memory: 44k iné
+init started: BusyBox v0.60.2 (2002.07.01-12:06+0000) multi-call Configuring hostname
+Configuring lo...
+Configuring eth0...
+Configuring Gateway...
+
+Please press Enter to activate this console.
+
+ELPT860 login: root
+Password:
+Welcome to Linux-2.4.4 for ELPT CPU board (MPC860T @ 50MHz)
+
+ a8888b.
+ d888888b.
+ 8P"YP"Y88
+ _ _ 8|o||o|88
+ | | |_| 8' .88
+ | | _ ____ _ _ _ _ 8`._.' Y8.
+ | | | | _ \| | | |\ \/ / d/ `8b.
+ | |___ | | | | | |_| |/ \ .dP . Y8b.
+ |_____||_|_| |_|\____|\_/\_/ d8:' " `::88b.
+ d8" `Y88b
+ :8P ' :888
+ 8a. : _a88P
+ ._/"Yaa_ : .| 88P|
+ \ YP" `| 8P `.
+ / \._____.d| .'
+ `--..__)888888P`._.'
+login[21]: root login on `ttyS0'
+
+
+
+BusyBox v0.60.3 (2002.07.20-10:39+0000) Built-in shell (ash)
+Enter 'help' for a list of built-in commands.
+
+root@ELPT860:~ #
diff --git a/board/LEOX/elpt860/config.mk b/board/LEOX/elpt860/config.mk
new file mode 100644
index 0000000000..defc360800
--- /dev/null
+++ b/board/LEOX/elpt860/config.mk
@@ -0,0 +1,36 @@
+#######################################################################
+#
+# Copyright (C) 2000, 2001, 2002, 2003
+# The LEOX team <team@leox.org>, http://www.leox.org
+#
+# LEOX.org is about the development of free hardware and software resources
+# for system on chip.
+#
+# Description: U-Boot port on the LEOX's ELPT860 CPU board
+# ~~~~~~~~~~~
+#
+#######################################################################
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#######################################################################
+
+#
+# ELPT860 board
+#
+
+TEXT_BASE = 0x02000000
+#TEXT_BASE = 0x00FB0000
diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c
new file mode 100644
index 0000000000..25645462ff
--- /dev/null
+++ b/board/LEOX/elpt860/elpt860.c
@@ -0,0 +1,399 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+** for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following functions:
+** ------
+** int board_pre_init(void)
+** int checkboard(void)
+** long int initdram(int board_type)
+** called from 'board_init_f()' into 'common/board.c'
+**
+** void reset_phy(void)
+** called from 'board_init_r()' into 'common/board.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/* ------------------------------------------------------------------------- */
+
+static long int dram_size (long int, long int *, long int);
+
+/* ------------------------------------------------------------------------- */
+
+#define _NOT_USED_ 0xFFFFFFFF
+
+const uint init_sdram_table[] =
+{
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04,
+ 0xFFFFFC04, /* last */
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, /* last */
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04,
+ 0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34,
+ 0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */
+};
+
+const uint sdram_table[] =
+{
+ /*
+ * Single Read. (Offset 0 in UPMA RAM)
+ */
+ 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04,
+ 0xFF0FFC00, /* last */
+ /*
+ * SDRAM Initialization (offset 5 in UPMA RAM)
+ *
+ * This is no UPM entry point. The following definition uses
+ * the remaining space to establish an initialization
+ * sequence, which is executed by a RUN command.
+ *
+ */
+ 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */
+ /*
+ * Burst Read. (Offset 8 in UPMA RAM)
+ */
+ 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04,
+ 0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00,
+ 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04,
+ 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+ /*
+ * Single Write. (Offset 18 in UPMA RAM)
+ */
+ 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00,
+ 0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */
+ _NOT_USED_,
+ /*
+ * Burst Write. (Offset 20 in UPMA RAM)
+ */
+ 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00,
+ 0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04,
+ 0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04,
+ 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+ /*
+ * Refresh (Offset 30 in UPMA RAM)
+ */
+ 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+ 0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_,
+ 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */
+ /*
+ * Exception. (Offset 3c in UPMA RAM)
+ */
+ 0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */
+};
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PC4 0x0800
+
+#define CFG_DS1 CFG_PC4
+
+/*
+ * Very early board init code (fpga boot, etc.)
+ */
+int
+board_pre_init (void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ /*
+ * Light up the red led on ELPT860 pcb (DS1) (PCDAT)
+ */
+ immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */
+ immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */
+ immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */
+
+ return ( 0 ); /* success */
+}
+
+/*
+ * Check Board Identity:
+ *
+ * Test ELPT860 ID string
+ *
+ * Return 1 if no second DRAM bank, otherwise returns 0
+ */
+
+int
+checkboard (void)
+{
+ unsigned char *s = getenv("serial#");
+
+ if ( !s || strncmp(s, "ELPT860", 7) )
+ printf ("### No HW ID - assuming ELPT860\n");
+
+ return ( 0 ); /* success */
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int
+initdram (int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size8, size9;
+ long int size_b0 = 0;
+
+ /*
+ * This sequence initializes SDRAM chips on ELPT860 board
+ */
+ upmconfig(UPMA, (uint *)init_sdram_table,
+ sizeof(init_sdram_table)/sizeof(uint));
+
+ memctl->memc_mptpr = 0x0200;
+ memctl->memc_mamr = 0x18002111;
+
+ memctl->memc_mar = 0x00000088;
+ memctl->memc_mcr = 0x80002000; /* CS1: SDRAM bank 0 */
+
+ upmconfig(UPMA, (uint *)sdram_table,
+ sizeof(sdram_table)/sizeof(uint));
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+ /*
+ * The following value is used as an address (i.e. opcode) for
+ * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
+ * the port size is 32bit the SDRAM does NOT "see" the lower two
+ * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
+ * MICRON SDRAMs:
+ * -> 0 00 010 0 010
+ * | | | | +- Burst Length = 4
+ * | | | +----- Burst Type = Sequential
+ * | | +------- CAS Latency = 2
+ * | +----------- Operating Mode = Standard
+ * +-------------- Write Burst Mode = Programmed Burst Length
+ */
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+ * preliminary addresses - these have to be modified after the
+ * SDRAM size has been determined.
+ */
+ memctl->memc_or1 = CFG_OR1_PRELIM;
+ memctl->memc_br1 = CFG_BR1_PRELIM;
+
+ memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+
+ udelay (200);
+
+ /* perform SDRAM initializsation sequence */
+
+ memctl->memc_mcr = 0x80002105; /* CS1: SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mcr = 0x80002230; /* CS1: SDRAM bank 0 - execute twice */
+ udelay (1);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+
+ udelay (1000);
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+ size8 = dram_size (CFG_MAMR_8COL,
+ (ulong *) SDRAM_BASE1_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ udelay (1000);
+
+ /*
+ * try 9 column mode
+ */
+ size9 = dram_size (CFG_MAMR_9COL,
+ (ulong *) SDRAM_BASE1_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ if ( size8 < size9 ) /* leave configuration at 9 columns */
+ {
+ size_b0 = size9;
+ /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
+ }
+ else /* back to 8 columns */
+ {
+ size_b0 = size8;
+ memctl->memc_mamr = CFG_MAMR_8COL;
+ udelay (500);
+ /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
+ }
+
+ udelay (1000);
+
+ /*
+ * Adjust refresh rate depending on SDRAM type, both banks
+ * For types > 128 MBit leave it at the current (fast) rate
+ */
+ if ( size_b0 < 0x02000000 )
+ {
+ /* reduce to 15.6 us (62.4 us / quad) */
+ memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+ udelay (1000);
+ }
+
+ /*
+ * Final mapping: map bigger bank first
+ */
+ memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+ memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+ {
+ unsigned long reg;
+
+ /* adjust refresh rate depending on SDRAM type, one bank */
+ reg = memctl->memc_mptpr;
+ reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
+ memctl->memc_mptpr = reg;
+ }
+
+ udelay(10000);
+
+ return (size_b0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int
+dram_size (long int mamr_value,
+ long int *base,
+ long int maxsize)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile long int *addr;
+ ulong cnt, val;
+ ulong save[32]; /* to make test non-destructive */
+ unsigned char i = 0;
+
+ memctl->memc_mamr = mamr_value;
+
+ for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1)
+ {
+ addr = base + cnt; /* pointer arith! */
+
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ /* write 0 to base address */
+ addr = base;
+ save[i] = *addr;
+ *addr = 0;
+
+ /* check at base address */
+ if ( (val = *addr) != 0 )
+ {
+ *addr = save[i];
+
+ return (0);
+ }
+
+ for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1)
+ {
+ addr = base + cnt; /* pointer arith! */
+
+ val = *addr;
+ *addr = save[--i];
+
+ if ( val != (~cnt) )
+ {
+ return (cnt * sizeof(long));
+ }
+ }
+
+ return (maxsize);
+}
+
+/* ------------------------------------------------------------------------- */
+
+#define CFG_PA1 0x4000
+#define CFG_PA2 0x2000
+
+#define CFG_LBKs (CFG_PA2 | CFG_PA1)
+
+void
+reset_phy (void)
+{
+ volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+ /*
+ * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect
+ * and no AUI loopback
+ */
+ immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */
+ immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */
+ immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */
+}
diff --git a/board/LEOX/elpt860/flash.c b/board/LEOX/elpt860/flash.c
new file mode 100644
index 0000000000..a9238e16cf
--- /dev/null
+++ b/board/LEOX/elpt860/flash.c
@@ -0,0 +1,615 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+** for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+** Note 1: In this file, you have to provide the following variable:
+** ------
+** flash_info_t flash_info[CFG_MAX_FLASH_BANKS]
+** 'flash_info_t' structure is defined into 'include/flash.h'
+** and defined as extern into 'common/cmd_flash.c'
+**
+** Note 2: In this file, you have to provide the following functions:
+** ------
+** unsigned long flash_init(void)
+** called from 'board_init_r()' into 'common/board.c'
+**
+** void flash_print_info(flash_info_t *info)
+** called from 'do_flinfo()' into 'common/cmd_flash.c'
+**
+** int flash_erase(flash_info_t *info,
+** int s_first,
+** int s_last)
+** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c'
+**
+** int write_buff (flash_info_t *info,
+** uchar *src,
+** ulong addr,
+** ulong cnt)
+** called from 'flash_write()' into 'common/cmd_flash.c'
+*/
+
+#include <common.h>
+#include <mpc8xx.h>
+
+
+#ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * Internal Functions
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info);
+static ulong flash_get_size (volatile unsigned char *addr, flash_info_t *info);
+
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static int write_byte (flash_info_t *info, ulong dest, uchar data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long
+flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i)
+ {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM,
+ &flash_info[0]);
+
+ if ( flash_info[0].flash_id == FLASH_UNKNOWN )
+ {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V;
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size ((volatile unsigned char *)CFG_FLASH_BASE,
+ &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+ /* monitor protection ON by default */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* ENV protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE-1,
+ &flash_info[0]);
+#endif
+
+ flash_info[0].size = size_b0;
+
+ return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void
+flash_get_offsets (ulong base,
+ flash_info_t *info)
+{
+ int i;
+
+#define SECTOR_64KB 0x00010000
+
+ /* set up sector start adress table */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ info->start[i] = base + (i * SECTOR_64KB);
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void
+flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if ( info->flash_id == FLASH_UNKNOWN )
+ {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch ( info->flash_id & FLASH_VENDMASK )
+ {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_STM: printf ("STM (Thomson) "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch ( info->flash_id & FLASH_TYPEMASK )
+ {
+ case FLASH_AM040: printf ("AM29F040 (4 Mbits)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld KB in %d Sectors\n",
+ info->size >> 10, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i)
+ {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong
+flash_get_size (volatile unsigned char *addr,
+ flash_info_t *info)
+{
+ short i;
+ uchar value;
+ ulong base = (ulong)addr;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0x90;
+
+ value = addr[0];
+
+ switch ( value )
+ {
+ /* case AMD_MANUFACT: */
+ case 0x01:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ /* case FUJ_MANUFACT: */
+ case 0x04:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ /* case STM_MANUFACT: */
+ case 0x20:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+
+ switch ( value )
+ {
+ case STM_ID_F040B:
+ case AMD_ID_F040B:
+ info->flash_id += FLASH_AM040; /* 4 Mbits = 512k * 8 */
+ info->sector_count = 8;
+ info->size = 0x00080000;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+ }
+
+ /* set up sector start adress table */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ info->start[i] = base + (i * 0x00010000);
+ }
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++)
+ {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned char *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if ( info->flash_id != FLASH_UNKNOWN )
+ {
+ addr = (volatile unsigned char *)info->start[0];
+
+ *addr = 0xF0; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int
+flash_erase (flash_info_t *info,
+ int s_first,
+ int s_last)
+{
+ volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ( (s_first < 0) || (s_first > s_last) )
+ {
+ if ( info->flash_id == FLASH_UNKNOWN )
+ {
+ printf ("- missing\n");
+ }
+ else
+ {
+ printf ("- no sectors to erase\n");
+ }
+ return ( 1 );
+ }
+
+ if ( (info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP) )
+ {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return ( 1 );
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect)
+ {
+ if ( info->protect[sect] )
+ {
+ prot++;
+ }
+ }
+
+ if ( prot )
+ {
+ printf ("- Warning: %d protected sectors will not be erased!\n", prot);
+ }
+ else
+ {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0x80;
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++)
+ {
+ if (info->protect[sect] == 0) /* not protected */
+ {
+ addr = (volatile unsigned char *)(info->start[sect]);
+ addr[0] = 0x30;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if ( flag )
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if ( l_sect < 0 )
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (volatile unsigned char *)(info->start[l_sect]);
+ while ( (addr[0] & 0x80) != 0x80 )
+ {
+ if ( (now = get_timer(start)) > CFG_FLASH_ERASE_TOUT )
+ {
+ printf ("Timeout\n");
+ return ( 1 );
+ }
+ /* show that we're waiting */
+ if ( (now - last) > 1000 ) /* every second */
+ {
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned char *)info->start[0];
+ addr[0] = 0xF0; /* reset bank */
+
+ printf (" done\n");
+
+ return ( 0 );
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int
+write_buff (flash_info_t *info,
+ uchar *src,
+ ulong addr,
+ ulong cnt)
+{
+ ulong cp, wp, data;
+ uchar bdata;
+ int i, l, rc;
+
+ if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 )
+ {
+ /* Width of the data bus: 8 bits */
+
+ wp = addr;
+
+ while ( cnt )
+ {
+ bdata = *src++;
+
+ if ( (rc = write_byte(info, wp, bdata)) != 0 )
+ {
+ return (rc);
+ }
+
+ ++wp;
+ --cnt;
+ }
+
+ return ( 0 );
+ }
+ else
+ {
+ /* Width of the data bus: 32 bits */
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ( (l = addr - wp) != 0 )
+ {
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<4 && cnt>0; ++i)
+ {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<4; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ( (rc = write_word(info, wp, data)) != 0 )
+ {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while ( cnt >= 4 )
+ {
+ data = 0;
+ for (i=0; i<4; ++i)
+ {
+ data = (data << 8) | *src++;
+ }
+ if ( (rc = write_word(info, wp, data)) != 0 )
+ {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if ( cnt == 0 )
+ {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp)
+ {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<4; ++i, ++cp)
+ {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+ }
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_word (flash_info_t *info,
+ ulong dest,
+ ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ( (*((vu_long *)dest) & data) != data )
+ {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0x00AA00AA;
+ addr[0x02AA] = 0x00550055;
+ addr[0x0555] = 0x00A000A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if ( flag )
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) )
+ {
+ if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+ {
+ return (1);
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a byte to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int
+write_byte (flash_info_t *info,
+ ulong dest,
+ uchar data)
+{
+ volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ( (*((volatile unsigned char *)dest) & data) != data )
+ {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAA;
+ addr[0x02AA] = 0x55;
+ addr[0x0555] = 0xA0;
+
+ *((volatile unsigned char *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if ( flag )
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) )
+ {
+ if ( get_timer(start) > CFG_FLASH_WRITE_TOUT )
+ {
+ return (1);
+ }
+ }
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
new file mode 100644
index 0000000000..77945d0dd2
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -0,0 +1,146 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+** for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+ lib_generic/string.o (.text)
+ lib_ppc/cache.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_ppc/time.o (.text)
+ lib_ppc/ticks.o (.text)
+
+ . = env_offset;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/LEOX/elpt860/u-boot.lds.debug b/board/LEOX/elpt860/u-boot.lds.debug
new file mode 100644
index 0000000000..b81235fd4b
--- /dev/null
+++ b/board/LEOX/elpt860/u-boot.lds.debug
@@ -0,0 +1,140 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+** for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+
+ . = env_offset;
+ common/environment.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
new file mode 100644
index 0000000000..cc66e32e2f
--- /dev/null
+++ b/board/cpc45/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2001-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o plx9030.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $^
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/cpc45/config.mk b/board/cpc45/config.mk
new file mode 100644
index 0000000000..bf9d9debc6
--- /dev/null
+++ b/board/cpc45/config.mk
@@ -0,0 +1,36 @@
+#
+# (C) Copyright 2001-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# CPC45 board
+#
+
+
+ifeq ($(CONFIG_BOOT_ROM),y)
+ TEXT_BASE := 0xFFF00000
+ PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
+else
+ TEXT_BASE := 0xFFF00000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
new file mode 100644
index 0000000000..01067f53e6
--- /dev/null
+++ b/board/cpc45/cpc45.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+#include <pci.h>
+
+int sysControlDisplay(int digit, uchar ascii_code);
+extern void Plx9030Init(void);
+
+ /* We have to clear the initial data area here. Couldn't have done it
+ * earlier because DRAM had not been initialized.
+ */
+int board_pre_init(void)
+{
+
+ /* enable DUAL UART Mode on CPC45 */
+ *(uchar*)DUART_DCR |= 0x1; /* set DCM bit */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+/*
+ char revision = BOARD_REV;
+*/
+ ulong busfreq = get_bus_freq(0);
+ char buf[32];
+
+ printf("CPC45 ");
+/*
+ printf("Revision %d ", revision);
+*/
+ printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
+
+ return 0;
+}
+
+long int initdram(int board_type)
+{
+ int i, cnt;
+ volatile uchar * base = CFG_SDRAM_BASE;
+ volatile ulong * addr;
+ ulong save[32];
+ ulong val, ret = 0;
+
+ for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
+
+ addr = (volatile ulong *)base + cnt;
+ save[i++] = *addr;
+ *addr = ~cnt;
+ }
+
+ addr = (volatile ulong *)base;
+ save[i] = *addr;
+ *addr = 0;
+
+ if (*addr != 0) {
+ *addr = save[i];
+ goto Done;
+ }
+
+ for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
+ addr = (volatile ulong *)base + cnt;
+ val = *addr;
+ *addr = save[--i];
+ if (val != ~cnt) {
+ ulong new_bank0_end = cnt * sizeof(long) - 1;
+ ulong mear1 = mpc824x_mpc107_getreg(MEAR1);
+ ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
+ mear1 = (mear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+ emear1 = (emear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
+ mpc824x_mpc107_setreg(MEAR1, mear1);
+ mpc824x_mpc107_setreg(EMEAR1, emear1);
+
+ ret = cnt * sizeof(long);
+ goto Done;
+ }
+ }
+
+ ret = CFG_MAX_RAM_SIZE;
+Done:
+ return ret;
+}
+
+/*
+ * Initialize PCI Devices, report devices found.
+ */
+#ifndef CONFIG_PCI_PNP
+
+static struct pci_config_table pci_sandpoint_config_table[] = {
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+ { }
+};
+#endif
+
+
+struct pci_controller hose = {
+#ifndef CONFIG_PCI_PNP
+ config_table: pci_sandpoint_config_table,
+#endif
+};
+
+void pci_init_board(void)
+{
+ pci_mpc824x_init(&hose);
+
+ /* init PCI_to_LOCAL Bus BRIDGE */
+ Plx9030Init();
+
+ sysControlDisplay(0,' ');
+ sysControlDisplay(1,'C');
+ sysControlDisplay(2,'P');
+ sysControlDisplay(3,'C');
+ sysControlDisplay(4,' ');
+ sysControlDisplay(5,'4');
+ sysControlDisplay(6,'5');
+ sysControlDisplay(7,' ');
+
+}
+
+/**************************************************************************
+*
+* sysControlDisplay - controls one of the Alphanum. Display digits.
+*
+* This routine will write an ASCII character to the display digit requested.
+*
+* SEE ALSO:
+*
+* RETURNS: NA
+*/
+
+int sysControlDisplay
+ (
+ int digit, /* number of digit 0..7 */
+ uchar ascii_code /* ASCII code */
+ )
+{
+ if ((digit < 0) || (digit > 7))
+ return (-1);
+
+ *((volatile uchar*)(DISP_CHR_RAM + digit)) = ascii_code;
+
+ return (0);
+}
+
diff --git a/board/cpc45/flash.c b/board/cpc45/flash.c
new file mode 100644
index 0000000000..6e81b9c335
--- /dev/null
+++ b/board/cpc45/flash.c
@@ -0,0 +1,493 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <asm/processor.h>
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+#define FLASH_BANK_SIZE 0x800000
+#define MAIN_SECT_SIZE 0x40000
+#define PARAM_SECT_SIZE 0x8000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static int write_data (flash_info_t *info, ulong dest, ulong *data);
+static void write_via_fpu(vu_long *addr, ulong *data);
+static __inline__ unsigned long get_msr(void);
+static __inline__ void set_msr(unsigned long msr);
+
+/*---------------------------------------------------------------------*/
+#undef DEBUG_FLASH
+
+/*---------------------------------------------------------------------*/
+#ifdef DEBUG_FLASH
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+/*---------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ int i, j;
+ ulong size = 0;
+ uchar tempChar;
+
+ /* Enable flash writes on CPC45 */
+
+ tempChar = BOARD_CTRL;
+
+ tempChar |= (B_CTRL_FWPT_1 | B_CTRL_FWRE_1);
+
+ tempChar &= ~(B_CTRL_FWPT_0 | B_CTRL_FWRE_0);
+
+ BOARD_CTRL = tempChar;
+
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ vu_long *addr = (vu_long *)(CFG_FLASH_BASE + i * FLASH_BANK_SIZE);
+
+ addr[0] = 0x00900090;
+
+ DEBUGF ("Flash bank # %d:\n"
+ "\tManuf. ID @ 0x%08lX: 0x%08lX\n"
+ "\tDevice ID @ 0x%08lX: 0x%08lX\n",
+ i,
+ (ulong)(&addr[0]), addr[0],
+ (ulong)(&addr[2]), addr[2]);
+
+
+ if ((addr[0] == addr[1]) && (addr[0] == INTEL_MANUFACT) &&
+ (addr[2] == addr[3]) && (addr[2] == INTEL_ID_28F160F3T))
+ {
+
+ flash_info[i].flash_id = (FLASH_MAN_INTEL & FLASH_VENDMASK) |
+ (INTEL_ID_28F160F3T & FLASH_TYPEMASK);
+
+ } else {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ addr[0] = 0xFFFFFFFF;
+ goto Done;
+ }
+
+ DEBUGF ("flash_id = 0x%08lX\n", flash_info[i].flash_id);
+
+ addr[0] = 0xFFFFFFFF;
+
+ flash_info[i].size = FLASH_BANK_SIZE;
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ for (j = 0; j < flash_info[i].sector_count; j++) {
+ if (j > 30) {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ (MAIN_SECT_SIZE * 31) + (j - 31) * PARAM_SECT_SIZE;
+ } else {
+ flash_info[i].start[j] = CFG_FLASH_BASE +
+ i * FLASH_BANK_SIZE +
+ j * MAIN_SECT_SIZE;
+ }
+ }
+ size += flash_info[i].size;
+ }
+
+ /* Protect monitor and environment sectors
+ */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[1]);
+#else
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#endif
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+#if CFG_ENV_ADDR >= CFG_FLASH_BASE + FLASH_BANK_SIZE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[1]);
+#else
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+#endif
+
+Done:
+ return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ switch ((i = info->flash_id & FLASH_VENDMASK)) {
+ case (FLASH_MAN_INTEL & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor 0x%04x ", i);
+ break;
+ }
+
+ switch ((i = info->flash_id & FLASH_TYPEMASK)) {
+ case (INTEL_ID_28F160F3T & FLASH_TYPEMASK):
+ printf ("28F160F3T (16Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type 0x%04x\n", i);
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+Done:
+ return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ int flag, prot, sect;
+ ulong start, now, last;
+
+ DEBUGF ("Erase flash bank %d sect %d ... %d\n",
+ info - &flash_info[0], s_first, s_last);
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (FLASH_MAN_INTEL & FLASH_VENDMASK)) {
+ printf ("Can erase only Intel flash types - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ start = get_timer (0);
+ last = start;
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ vu_long *addr = (vu_long *)(info->start[sect]);
+
+ DEBUGF ("Erase sect %d @ 0x%08lX\n",
+ sect, (ulong)addr);
+
+ /* Disable interrupts which might cause a timeout
+ * here.
+ */
+ flag = disable_interrupts();
+
+ addr[0] = 0x00500050; /* clear status register */
+ addr[0] = 0x00200020; /* erase setup */
+ addr[0] = 0x00D000D0; /* erase confirm */
+
+ addr[1] = 0x00500050; /* clear status register */
+ addr[1] = 0x00200020; /* erase setup */
+ addr[1] = 0x00D000D0; /* erase confirm */
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ while (((addr[0] & 0x00800080) != 0x00800080) ||
+ ((addr[1] & 0x00800080) != 0x00800080) ) {
+ if ((now=get_timer(start)) >
+ CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ addr[0] = 0x00B000B0; /* suspend erase */
+ addr[0] = 0x00FF00FF; /* to read mode */
+ return 1;
+ }
+
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+ addr[0] = 0x00FF00FF;
+ }
+ }
+ printf (" done\n");
+ return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ * 4 - Flash not identified
+ */
+
+#define FLASH_WIDTH 8 /* flash bus width in bytes */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong wp, cp, msr;
+ int l, rc, i;
+ ulong data[2];
+ ulong *datah = &data[0];
+ ulong *datal = &data[1];
+
+ DEBUGF ("Flash write_buff: @ 0x%08lx, src 0x%08lx len %ld\n",
+ addr, (ulong)src, cnt);
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ return 4;
+ }
+
+ msr = get_msr();
+ set_msr(msr | MSR_FP);
+
+ wp = (addr & ~(FLASH_WIDTH-1)); /* get lower aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ *datah = *datal = 0;
+
+ for (i = 0, cp = wp; i < l; i++, cp++) {
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | (*(uchar *)cp);
+ }
+ for (; i < FLASH_WIDTH && cnt > 0; ++i) {
+ char tmp;
+
+ tmp = *src;
+
+ src++;
+
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | tmp;
+
+ --cnt; ++cp;
+ }
+
+ for (; cnt == 0 && i < FLASH_WIDTH; ++i, ++cp) {
+ if (i >= 4) {
+ *datah = (*datah << 8) |
+ ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datah << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_data(info, wp, data)) != 0) {
+ set_msr(msr);
+ return (rc);
+ }
+
+ wp += FLASH_WIDTH;
+ }
+
+ /*
+ * handle FLASH_WIDTH aligned part
+ */
+ while (cnt >= FLASH_WIDTH) {
+ *datah = *(ulong *)src;
+ *datal = *(ulong *)(src + 4);
+ if ((rc = write_data(info, wp, data)) != 0) {
+ set_msr(msr);
+ return (rc);
+ }
+ wp += FLASH_WIDTH;
+ cnt -= FLASH_WIDTH;
+ src += FLASH_WIDTH;
+ }
+
+ if (cnt == 0) {
+ set_msr(msr);
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ *datah = *datal = 0;
+ for (i = 0, cp = wp; i < FLASH_WIDTH && cnt > 0; ++i, ++cp) {
+ char tmp;
+
+ tmp = *src;
+
+ src++;
+
+ if (i >= 4) {
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | tmp;
+
+ --cnt;
+ }
+
+ for (; i < FLASH_WIDTH; ++i, ++cp) {
+ if (i >= 4) {
+ *datah = (*datah << 8) | ((*datal & 0xFF000000) >> 24);
+ }
+
+ *datal = (*datal << 8) | (*(uchar *)cp);
+ }
+
+ rc = write_data(info, wp, data);
+ set_msr(msr);
+
+ return (rc);
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_data (flash_info_t *info, ulong dest, ulong *data)
+{
+ vu_long *addr = (vu_long *)dest;
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if (((addr[0] & data[0]) != data[0]) ||
+ ((addr[1] & data[1]) != data[1]) ) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0] = 0x00400040; /* write setup */
+ write_via_fpu(addr, data);
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ start = get_timer (0);
+
+ while (((addr[0] & 0x00800080) != 0x00800080) ||
+ ((addr[1] & 0x00800080) != 0x00800080) ) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ addr[0] = 0x00FF00FF; /* restore read mode */
+ return (1);
+ }
+ }
+
+ addr[0] = 0x00FF00FF; /* restore read mode */
+
+ return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void write_via_fpu(vu_long *addr, ulong *data)
+{
+ __asm__ __volatile__ ("lfd 1, 0(%0)" : : "r" (data));
+ __asm__ __volatile__ ("stfd 1, 0(%0)" : : "r" (addr));
+}
+/*-----------------------------------------------------------------------
+ */
+static __inline__ unsigned long get_msr(void)
+{
+ unsigned long msr;
+
+ __asm__ __volatile__ ("mfmsr %0" : "=r" (msr) :);
+ return msr;
+}
+
+static __inline__ void set_msr(unsigned long msr)
+{
+ __asm__ __volatile__ ("mtmsr %0" : : "r" (msr));
+}
diff --git a/board/cpc45/plx9030.c b/board/cpc45/plx9030.c
new file mode 100644
index 0000000000..e337bd200b
--- /dev/null
+++ b/board/cpc45/plx9030.c
@@ -0,0 +1,174 @@
+/* Plx9030.c - system configuration module for PLX9030 PCI to Local Bus Bridge */
+/*
+ * (C) Copyright 2002-2003
+ * Josef Wagner, MicroSys GmbH, wagner@microsys.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Date Modification by
+ * ------- ---------------------------------------------- ---
+ * 30sep02 converted from VxWorks to LINUX wa
+*/
+
+
+/*
+DESCRIPTION
+
+This is the configuration module for the PLX9030 PCI to Local Bus Bridge.
+It configures the Chip select lines for SRAM (CS0), ST16C552 (CS1,CS2), Display and local
+registers (CS3) on CPC45.
+*/
+
+/* includes */
+
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/io.h>
+#include <pci.h>
+
+/* imports */
+
+
+/* defines */
+#define PLX9030_VENDOR_ID 0x10B5
+#define PLX9030_DEVICE_ID 0x9030
+
+#undef PLX_DEBUG
+
+/* PLX9030 register offsets */
+#define P9030_LAS0RR 0x00
+#define P9030_LAS1RR 0x04
+#define P9030_LAS2RR 0x08
+#define P9030_LAS3RR 0x0c
+#define P9030_EROMRR 0x10
+#define P9030_LAS0BA 0x14
+#define P9030_LAS1BA 0x18
+#define P9030_LAS2BA 0x1c
+#define P9030_LAS3BA 0x20
+#define P9030_EROMBA 0x24
+#define P9030_LAS0BRD 0x28
+#define P9030_LAS1BRD 0x2c
+#define P9030_LAS2BRD 0x30
+#define P9030_LAS3BRD 0x34
+#define P9030_EROMBRD 0x38
+#define P9030_CS0BASE 0x3C
+#define P9030_CS1BASE 0x40
+#define P9030_CS2BASE 0x44
+#define P9030_CS3BASE 0x48
+#define P9030_INTCSR 0x4c
+#define P9030_CNTRL 0x50
+#define P9030_GPIOC 0x54
+
+/* typedefs */
+
+
+/* locals */
+
+static struct pci_device_id supported[] = {
+ { PLX9030_VENDOR_ID, PLX9030_DEVICE_ID },
+ { }
+};
+
+/* forward declarations */
+void sysOutLong(ulong address, ulong value);
+
+
+/***************************************************************************
+*
+* Plx9030Init - init CS0..CS3 for CPC45
+*
+*
+* RETURNS: N/A
+*/
+
+void Plx9030Init (void)
+{
+ pci_dev_t devno;
+ ulong membaseCsr; /* base address of device memory space */
+ int idx = 0; /* general index */
+
+
+ /* find plx9030 device */
+
+ if ((devno = pci_find_devices(supported, idx++)) < 0)
+ {
+ printf("No PLX9030 device found !!\n");
+ return;
+ }
+
+
+#ifdef PLX_DEBUG
+ printf("PLX 9030 device found ! devno = 0x%x\n",devno);
+#endif
+
+ membaseCsr = PCI_PLX9030_MEMADDR;
+
+ /* set base address */
+ pci_write_config_dword(devno, PCI_BASE_ADDRESS_0, membaseCsr);
+
+ /* enable mapped memory and IO addresses */
+ pci_write_config_dword(devno,
+ PCI_COMMAND,
+ PCI_COMMAND_MEMORY |
+ PCI_COMMAND_MASTER);
+
+
+ /* configure GBIOC */
+ sysOutLong((membaseCsr + P9030_GPIOC), 0x00000FC0); /* CS2/CS3 enable */
+
+ /* configure CS0 (SRAM) */
+ sysOutLong((membaseCsr + P9030_LAS0BA), 0x00000001); /* enable space base */
+ sysOutLong((membaseCsr + P9030_LAS0RR), 0x0FE00000); /* 2 MByte */
+ sysOutLong((membaseCsr + P9030_LAS0BRD), 0x51928900); /* 4 wait states */
+ sysOutLong((membaseCsr + P9030_CS0BASE), 0x00100001); /* enable 2 MByte */
+ /* remap CS0 (SRAM) */
+ pci_write_config_dword(devno, PCI_BASE_ADDRESS_2, SRAM_BASE);
+
+ /* configure CS1 (ST16552 / CHAN A) */
+ sysOutLong((membaseCsr + P9030_LAS1BA), 0x00400001); /* enable space base */
+ sysOutLong((membaseCsr + P9030_LAS1RR), 0x0FFFFF00); /* 256 byte */
+ sysOutLong((membaseCsr + P9030_LAS1BRD), 0x55122900); /* 4 wait states */
+ sysOutLong((membaseCsr + P9030_CS1BASE), 0x00400081); /* enable 256 Byte */
+ /* remap CS1 (ST16552 / CHAN A) */
+ /* remap CS1 (ST16552 / CHAN A) */
+ pci_write_config_dword(devno, PCI_BASE_ADDRESS_3, ST16552_A_BASE);
+
+ /* configure CS2 (ST16552 / CHAN B) */
+ sysOutLong((membaseCsr + P9030_LAS2BA), 0x00800001); /* enable space base */
+ sysOutLong((membaseCsr + P9030_LAS2RR), 0x0FFFFF00); /* 256 byte */
+ sysOutLong((membaseCsr + P9030_LAS2BRD), 0x55122900); /* 4 wait states */
+ sysOutLong((membaseCsr + P9030_CS2BASE), 0x00800081); /* enable 256 Byte */
+ /* remap CS2 (ST16552 / CHAN B) */
+ pci_write_config_dword(devno, PCI_BASE_ADDRESS_4, ST16552_B_BASE);
+
+ /* configure CS3 (BCSR) */
+ sysOutLong((membaseCsr + P9030_LAS3BA), 0x00C00001); /* enable space base */
+ sysOutLong((membaseCsr + P9030_LAS3RR), 0x0FFFFF00); /* 256 byte */
+ sysOutLong((membaseCsr + P9030_LAS3BRD), 0x55357A80); /* 9 wait states */
+ sysOutLong((membaseCsr + P9030_CS3BASE), 0x00C00081); /* enable 256 Byte */
+ /* remap CS3 (DISPLAY and BCSR) */
+ pci_write_config_dword(devno, PCI_BASE_ADDRESS_5, BCSR_BASE);
+}
+
+void sysOutLong(ulong address, ulong value)
+{
+ *(ulong*)address = cpu_to_le32(value);
+}
+
diff --git a/board/cpc45/u-boot.lds b/board/cpc45/u-boot.lds
new file mode 100644
index 0000000000..611ac0a063
--- /dev/null
+++ b/board/cpc45/u-boot.lds
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc824x/start.o (.text)
+ lib_ppc/board.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = DEFINED(env_offset) ? env_offset : .;
+ common/environment.o (.text)
+
+ *(.text)
+
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
+
diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c
index a7c583cc38..f960ce51ea 100644
--- a/board/cu824/cu824.c
+++ b/board/cu824/cu824.c
@@ -98,11 +98,11 @@ Done:
*/
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_sandpoint_config_table[] = {
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN),
- pci_cfgfunc_config_device, { CFG_ETH_IOBASE,
- 0,
- PCI_COMMAND_IO | PCI_COMMAND_MASTER }},
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
+ pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
+ PCI_ENET0_MEMADDR,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+
{ }
};
#endif
diff --git a/board/emk/top860/config.mk b/board/emk/top860/config.mk
new file mode 100644
index 0000000000..95917a18b6
--- /dev/null
+++ b/board/emk/top860/config.mk
@@ -0,0 +1,24 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x80000000
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
index 5505bb549b..b56707d232 100644
--- a/board/innokom/flash.c
+++ b/board/innokom/flash.c
@@ -86,81 +86,79 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
*/
static struct part_info part;
+static int current_part = -1;
#ifdef CONFIG_MTD_INNOKOM_16MB
#ifdef CONFIG_MTD_INNOKOM_64MB
#error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
#endif
struct part_info* jffs2_part_info(int part_num) {
+ void *jffs2_priv_saved = part.jffs2_priv;
PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
+ if (current_part == part_num)
+ return &part;
+
/* u-boot partition */
if(part_num==0){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00000000;
part.size=256*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
/* primary OS+firmware partition */
if(part_num==1){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00040000;
part.size=768*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
-
+
/* secondary OS+firmware partition */
if(part_num==2){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00100000;
part.size=8*1024*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
/* data partition */
if(part_num==3){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00900000;
part.size=7*1024*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
-
+ }
+
+ if (current_part == part_num) {
+ part.usr_priv = &current_part;
+ part.jffs2_priv = jffs2_priv_saved;
return &part;
}
@@ -174,75 +172,72 @@ struct part_info* jffs2_part_info(int part_num) {
#error Please define only one CONFIG_MTD_INNOKOM_XXMB option.
#endif
struct part_info* jffs2_part_info(int part_num) {
+ void *jffs2_priv_saved = part.jffs2_priv;
PRINTK2("jffs2_part_info: part_num=%i\n",part_num);
+ if (current_part == part_num)
+ return &part;
+
/* u-boot partition */
if(part_num==0){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00000000;
part.size=256*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
/* primary OS+firmware partition */
if(part_num==1){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x00040000;
part.size=16*1024*1024-128*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
-
+
/* secondary OS+firmware partition */
if(part_num==2){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x01020000;
part.size=16*1024*1024-128*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
- return &part;
}
/* data partition */
if(part_num==3){
- if(part.usr_priv==(void*)1) return &part;
-
memset(&part, 0, sizeof(part));
-
+
part.offset=(char*)0x02000000;
part.size=32*1024*1024;
-
+
/* Mark the struct as ready */
- part.usr_priv=(void*)1;
+ current_part = part_num;
PRINTK("part.offset = 0x%08x\n",(unsigned int)part.offset);
PRINTK("part.size = 0x%08x\n",(unsigned int)part.size);
-
+ }
+
+ if (current_part == part_num) {
+ part.usr_priv = &current_part;
+ part.jffs2_priv = jffs2_priv_saved;
return &part;
}
@@ -336,13 +331,13 @@ void flash_print_info (flash_info_t *info)
return;
}
- printf(" Size: %ld MB in %d Sectors\n",
+ printf(" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
if ((i % 5) == 0) printf ("\n ");
-
+
printf (" %08lX%s", info->start[i],
info->protect[i] ? " (RO)" : " ");
}
@@ -371,7 +366,7 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
return ERR_UNKNOWN_FLASH_VENDOR;
-
+
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) prot++;
@@ -421,13 +416,13 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
goto outahere;
}
}
-
+
PRINTK("clearing status register\n");
- *addr = 0x0050;
+ *addr = 0x0050;
PRINTK("resetting to read mode");
- *addr = 0x00FF;
+ *addr = 0x00FF;
}
-
+
printf("ok.\n");
}
diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c
index 11f33279ee..a20c211055 100644
--- a/board/ip860/ip860.c
+++ b/board/ip860/ip860.c
@@ -28,7 +28,8 @@
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
-
+unsigned long ip860_get_dram_size(void);
+unsigned long ip860_get_clk_freq (void);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFFFFF
@@ -82,8 +83,22 @@ const uint sdram_table[] = {
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
+
/* ------------------------------------------------------------------------- */
+int board_pre_init(void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+/* init BCSR chipselect line for ip860_get_clk_freq() and ip860_get_dram_size() */
+ memctl->memc_or4 = CFG_OR4;
+ memctl->memc_br4 = CFG_BR4;
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
@@ -127,6 +142,7 @@ long int initdram (int board_type)
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size;
+ ulong refresh_val;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
@@ -134,7 +150,17 @@ long int initdram (int board_type)
/*
* Preliminary prescaler for refresh
*/
- memctl->memc_mptpr = 0x0400;
+ if (ip860_get_clk_freq() == 50000000)
+ {
+ memctl->memc_mptpr = 0x0400;
+ refresh_val = 0xC3000000;
+ }
+ else
+ {
+ memctl->memc_mptpr = 0x0200;
+ refresh_val = 0x9C000000;
+ }
+
memctl->memc_mar = 0x00000088;
@@ -151,18 +177,22 @@ long int initdram (int board_type)
/* perform SDRAM initializsation sequence */
- memctl->memc_mamr = 0xC3804114;
- memctl->memc_mcr = 0x80004105; /* run precharge pattern from loc 5 */
- udelay (1);
- memctl->memc_mamr = 0xC3804118;
- memctl->memc_mcr = 0x80004130; /* run refresh pattern 8 times */
+ memctl->memc_mamr = 0x00804114 | refresh_val;
+ memctl->memc_mcr = 0x80004105; /* run precharge pattern from loc 5 */
+ udelay(1);
+ memctl->memc_mamr = 0x00804118 | refresh_val;
+ memctl->memc_mcr = 0x80004130; /* run refresh pattern 8 times */
+
udelay (1000);
/*
* Check SDRAM Memory Size
*/
- size = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE, SDRAM_MAX_SIZE);
+ if (ip860_get_dram_size() == 16)
+ size = dram_size (refresh_val | 0x00804114, (ulong *)SDRAM_BASE, SDRAM_MAX_SIZE);
+ else
+ size = dram_size (refresh_val | 0x00906114, (ulong *)SDRAM_BASE, SDRAM_MAX_SIZE);
udelay (1000);
@@ -291,3 +321,68 @@ void reset_phy (void)
}
/* ------------------------------------------------------------------------- */
+
+unsigned long ip860_get_clk_freq(void)
+{
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+ ulong temp;
+ uchar sysclk;
+
+ if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */
+ sysclk = (bcsr->bd_rev & 0x18) >> 3;
+ else
+ sysclk = 0x00;
+
+ switch (sysclk)
+ {
+ case 0x00:
+ temp = 50000000;
+ break;
+
+ case 0x01:
+ temp = 80000000;
+ break;
+
+ default:
+ temp = 50000000;
+ break;
+ }
+
+ return (temp);
+
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+unsigned long ip860_get_dram_size(void)
+{
+ volatile ip860_bcsr_t *bcsr = (ip860_bcsr_t *)BCSR_BASE;
+ ulong temp;
+ uchar dram_size;
+
+ if ((bcsr->bd_status & 0x80) == 0x80) /* bd_rev valid ? */
+ dram_size = (bcsr->bd_rev & 0xE0) >> 5;
+ else
+ dram_size = 0x00; /* default is 16 MB */
+
+ switch (dram_size)
+ {
+ case 0x00:
+ temp = 16;
+ break;
+
+ case 0x01:
+ temp = 32;
+ break;
+
+ default:
+ temp = 16;
+ break;
+ }
+
+ return (temp);
+
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/pm826/config.mk b/board/pm826/config.mk
index 8502e3f107..d2ab4fe985 100644
--- a/board/pm826/config.mk
+++ b/board/pm826/config.mk
@@ -33,10 +33,10 @@
#
ifeq ($(CONFIG_BOOT_ROM),y)
- TEXT_BASE := 0x60000000
+ TEXT_BASE := 0xFF800000
PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
else
- TEXT_BASE := 0x40000000
+ TEXT_BASE := 0xFF000000
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
diff --git a/board/trab/flash.c b/board/trab/flash.c
index d86c4bf770..27c2a5b490 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -185,9 +185,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
return ERR_INVAL;
}
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FLASH_MAN_AMD & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (FLASH_MAN_AMD & FLASH_VENDMASK): break; /* OK */
+ case (FLASH_MAN_FUJ & FLASH_VENDMASK): break; /* OK */
+ default:
+ debug ("## flash_erase: unknown manufacturer\n");
+ return (ERR_UNKNOWN_FLASH_VENDOR);
}
prot = 0;
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index 5e601ef794..894e3157d6 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -55,7 +55,8 @@
#define BLAU 0x0C
#define VIOLETT 0X0D
-ulong frame_buf_size;
+/* MAGIC */
+#define FRAME_BUF_SIZE ((256*4*56)/8)
#define frame_buf_offs 4
/* Supported VFD Types */
@@ -75,19 +76,13 @@ void init_grid_ctrl(void)
ulong adr, grid_cycle;
unsigned int bit, display;
unsigned char temp, bit_nr;
- ulong val;
/*
* clear frame buffer (logical clear => set to "black")
*/
- if (gd->vfd_inv_data == 0)
- val = 0;
- else
- val = ~0;
-
- for (adr = gd->fb_base; adr <= (gd->fb_base+7168); adr += 4) {
- (*(volatile ulong*)(adr)) = val;
- }
+ memset ((void *)(gd->fb_base),
+ gd->vfd_inv_data ? 0xFF : 0,
+ FRAME_BUF_SIZE);
switch (gd->vfd_type) {
case VFD_TYPE_T119C:
@@ -97,8 +92,8 @@ void init_grid_ctrl(void)
(grid_cycle + 200) * 4 +
frame_buf_offs + display;
/* wrap arround if offset (see manual S3C2400) */
- if (bit>=frame_buf_size*8)
- bit = bit - (frame_buf_size * 8);
+ if (bit>=FRAME_BUF_SIZE*8)
+ bit = bit - (FRAME_BUF_SIZE * 8);
adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
@@ -114,8 +109,8 @@ void init_grid_ctrl(void)
else
bit = grid_cycle*256*4+200*4+frame_buf_offs+display-4; /* grid nr. 0 */
/* wrap arround if offset (see manual S3C2400) */
- if (bit>=frame_buf_size*8)
- bit = bit-(frame_buf_size*8);
+ if (bit>=FRAME_BUF_SIZE*8)
+ bit = bit-(FRAME_BUF_SIZE*8);
adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -135,8 +130,8 @@ void init_grid_ctrl(void)
(253 - grid_cycle) * 4 +
frame_buf_offs + display;
/* wrap arround if offset (see manual S3C2400) */
- if (bit>=frame_buf_size*8)
- bit = bit - (frame_buf_size * 8);
+ if (bit>=FRAME_BUF_SIZE*8)
+ bit = bit - (FRAME_BUF_SIZE * 8);
adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8);
bit_nr = bit % 8;
bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
@@ -151,8 +146,8 @@ void init_grid_ctrl(void)
bit = grid_cycle*256*4+(252-grid_cycle)*4+frame_buf_offs+display;
/* wrap arround if offset (see manual S3C2400) */
- if (bit>=frame_buf_size*8)
- bit = bit-(frame_buf_size*8);
+ if (bit>=FRAME_BUF_SIZE*8)
+ bit = bit-(FRAME_BUF_SIZE*8);
adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8);
bit_nr = bit%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -263,8 +258,8 @@ void create_vfd_table(void)
* wrap arround if offset
* (see manual S3C2400)
*/
- if (pixel>=frame_buf_size*8)
- pixel = pixel-(frame_buf_size*8);
+ if (pixel>=FRAME_BUF_SIZE*8)
+ pixel = pixel-(FRAME_BUF_SIZE*8);
adr = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8);
bit_nr = pixel%8;
bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
@@ -466,7 +461,7 @@ int drv_vfd_init(void)
/* frame buffer startadr */
rLCDSADDR1 = gd->fb_base >> 1;
/* frame buffer endadr */
- rLCDSADDR2 = (gd->fb_base + frame_buf_size) >> 1;
+ rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
rLCDSADDR3 = ((256/4));
debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
@@ -490,11 +485,8 @@ ulong vfd_setmem (ulong addr)
{
ulong size;
- /* MAGIC */
- frame_buf_size = (256*4*56)/8;
-
/* Round up to nearest full page */
- size = (frame_buf_size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
+ size = (FRAME_BUF_SIZE + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1);
debug ("Reserving %ldk for VFD Framebuffer at: %08lx\n", size>>10, addr);
diff --git a/board/v37/flash.c b/board/v37/flash.c
index 4de0e14757..cb0e676a13 100644
--- a/board/v37/flash.c
+++ b/board/v37/flash.c
@@ -23,7 +23,7 @@
/*
* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * PPCboot port on RPXlite board
+ * U-Boot port on RPXlite board
*
* Some of flash control words are modified. (from 2x16bit device
* to 4x8bit device)
diff --git a/board/v37/v37.c b/board/v37/v37.c
index 764aff7916..f463af8e12 100644
--- a/board/v37/v37.c
+++ b/board/v37/v37.c
@@ -23,7 +23,7 @@
/*
* Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * PPCboot port on RPXlite board
+ * U-Boot port on RPXlite board
*
* DRAM related UPMA register values are modified.
* See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c
index 763f4181ac..4b411b3d37 100644
--- a/common/cmd_fdos.c
+++ b/common/cmd_fdos.c
@@ -53,7 +53,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* pre-set Boot file name */
if ((name = getenv("bootfile")) == NULL) {
- name = "pImage";
+ name = "uImage";
}
switch (argc) {
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index fc1d9c40f2..8df80612a7 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -83,7 +83,7 @@ jffs2_part_info(int part_num)
int
do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- char *filename = "pImage";
+ char *filename = "uImage";
ulong offset = CFG_LOAD_ADDR;
int size;
struct part_info *part;
diff --git a/common/main.c b/common/main.c
index 401efcf854..9ee32a5804 100644
--- a/common/main.c
+++ b/common/main.c
@@ -640,8 +640,6 @@ static void process_macros (const char *input, char *output)
case 0: /* Waiting for (unescaped) $ */
if ((c == '\'') && (prev != '\\')) {
state = 3;
- if (inputcnt)
- inputcnt--;
break;
}
if ((c == '$') && (prev != '\\')) {
@@ -694,8 +692,6 @@ static void process_macros (const char *input, char *output)
case 3: /* Waiting for ' */
if ((c == '\'') && (prev != '\\')) {
state = 0;
- if (inputcnt)
- inputcnt--;
} else {
*(output++) = c;
outputcnt--;
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index c0ee5de2e9..4bd91f98ca 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -42,8 +42,8 @@ void cpu_init_f (volatile immap_t * immr)
{
#ifndef CONFIG_MBX
volatile memctl8xx_t *memctl = &immr->im_memctl;
- ulong reg;
#endif
+ ulong reg;
/* SYPCR - contains watchdog control (11-9) */
diff --git a/doc/README-i386 b/doc/README-i386
index 99b3e198c4..862f3f7a3a 100644
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -1,4 +1,4 @@
-This is my attempt to port PPCBoot to the i386 platform. This
+This is my attempt to port U-Boot to the i386 platform. This
work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
It is currently capable of booting a linux bzImage from flash on
@@ -28,13 +28,13 @@ To use this code on the CDP:
2) Program it in to the CDP flashbank with remon
- ppcboot.bin should be programmed att offset 0x7e000 and the kernel at
+ u-boot.bin should be programmed att offset 0x7e000 and the kernel at
offset 0. If you want to use a jffs2 root file system (not included here),
it should be programmed to offset 0x100000.
remon> z
remon> yi
- remon> ns ppcboot.bin 7e0000
+ remon> ns u-boot.bin 7e0000
remon> ns bzImage 0
remon> ns image.jffs2 100000
@@ -43,7 +43,7 @@ To use this code on the CDP:
remon> z
remon> g
-4) PPCboot should output some message and a prompt on the terminal, to
+4) U-Boot should output some message and a prompt on the terminal, to
start the kernel issue the following command:
BOOT> bootm
diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539
index d3db38ef54..9302ff5ce4 100644
--- a/doc/README.IPHASE4539
+++ b/doc/README.IPHASE4539
@@ -332,10 +332,10 @@ Linux:
$ make IPHASE4539_config
$ make oldconfig
$ make dep
- $ make pImage
- $ cp -p arch/ppc/mbxboot/pImage /tftpboot
+ $ make uImage
+ $ cp -p arch/ppc/mbxboot/uImage /tftpboot
- Load pImage via tftp and boot it.
+ Load uImage via tftp and boot it.
Flash organisation:
diff --git a/include/asm-i386/ppcboot-i386.h b/include/asm-i386/u-boot-i386.h
index 704526e2ff..6e5e059592 100644
--- a/include/asm-i386/ppcboot-i386.h
+++ b/include/asm-i386/u-boot-i386.h
@@ -21,8 +21,8 @@
* MA 02111-1307 USA
*/
-#ifndef _PPCBOOT_I386_H_
-#define _PPCBOOT_I386_H_ 1
+#ifndef _U_BOOT_I386_H_
+#define _U_BOOT_I386_H_ 1
/* for the following variables, see start.S */
extern ulong i386boot_start; /* code start (in flash) */
@@ -50,4 +50,4 @@ int board_init(void);
int dram_init (void);
-#endif /* _PPCBOOT_I386_H_ */
+#endif /* _U_BOOT_I386_H_ */
diff --git a/include/common.h b/include/common.h
index bce0132afc..ac2a57d9a3 100644
--- a/include/common.h
+++ b/include/common.h
@@ -149,7 +149,7 @@ void setenv (char *, char *);
# include <asm/u-boot-arm.h> /* ARM version to be fixed! */
#endif /* CONFIG_ARM */
#ifdef CONFIG_I386 /* x86 version to be fixed! */
-# include <asm/ppcboot-i386.h>
+# include <asm/u-boot-i386.h>
#endif /* CONFIG_I386 */
void pci_init (void);
diff --git a/include/commproc.h b/include/commproc.h
index 159c294f84..5ff82b71a8 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -595,6 +595,32 @@ typedef struct scc_enet {
#endif /* CONFIG_PCU_E, CONFIG_CCM */
+/*** ELPT860 *********************************************************/
+
+#ifdef CONFIG_ELPT860
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.
+ */
+# define PROFF_ENET PROFF_SCC1
+# define CPM_CR_ENET CPM_CR_CH_SCC1
+# define SCC_ENET 0
+
+# define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
+# define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
+# define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
+# define PA_ENET_TCLK ((ushort)0x0200) /* PA 6 */
+
+# define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
+# define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
+# define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK1) to
+ * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+# define SICR_ENET_MASK ((uint)0x000000FF)
+# define SICR_ENET_CLKRT ((uint)0x00000025)
+#endif /* CONFIG_ELPT860 */
+
/*** ESTEEM 192E **************************************************/
#ifdef CONFIG_ESTEEM192E
/* ESTEEM192E
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
new file mode 100644
index 0000000000..ed843d40a4
--- /dev/null
+++ b/include/configs/CPC45.h
@@ -0,0 +1,448 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the CPC45 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X 1
+#define CONFIG_MPC8245 1
+#define CONFIG_CPC45 1
+
+
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_PCI | \
+ 0 /* CFG_CMD_DATE */ )
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+
+#if 1
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x00100000 /* Default load address */
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE 0x00000000
+
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_FLASH_BASE 0xFF000000
+#else
+#define CFG_FLASH_BASE 0xFF800000
+#endif
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+#define CFG_EUMB_ADDR 0xFCE00000
+
+#define CFG_MONITOR_BASE TEXT_BASE
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+#define CFG_MEMTEST_START 0x00004000 /* memtest works on */
+#define CFG_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
+
+ /* Maximum amount of RAM.
+ */
+#define CFG_MAX_RAM_SIZE 0x10000000
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+ /* Size in bytes reserved for initial data
+ */
+#define CFG_GBL_DATA_SIZE 128
+
+#define CFG_INIT_RAM_ADDR 0x40000000
+#define CFG_INIT_RAM_END 0x1000
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE 1
+
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_NS16550_COM1 (CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2 (CFG_EUMB_ADDR + 0x4600)
+#define DUART_DCR (CFG_EUMB_ADDR + 0x4511)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ 33000000
+#define CFG_HZ 1000
+/*
+ * SDRAM Configuration Settings
+ * Please note: currently only 64 and 128 MB SDRAM size supported
+ * set CFG_SDRAM_SIZE to 64 or 128
+ * Memory configuration using SPD information stored on the SODIMMs
+ * not yet supported.
+ */
+
+#define CFG_SDRAM_SIZE 64 /* SDRAM size -- 64 or 128 MB supported */
+
+ /* Bit-field values for MCCR1.
+ */
+#define CFG_ROMNAL 0
+#define CFG_ROMFAL 7
+
+#if (CFG_SDRAM_SIZE == 64) /* 64 MB */
+#define CFG_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
+#elif (CFG_SDRAM_SIZE == 128) /* 128 MB */
+#define CFG_BANK0_ROW 2 /* SDRAM bank 7-0 row address */
+#else
+# error "SDRAM size not supported"
+#endif
+#define CFG_BANK1_ROW 0
+#define CFG_BANK2_ROW 0
+#define CFG_BANK3_ROW 0
+#define CFG_BANK4_ROW 0
+#define CFG_BANK5_ROW 0
+#define CFG_BANK6_ROW 0
+#define CFG_BANK7_ROW 0
+
+ /* Bit-field values for MCCR2.
+ */
+#define CFG_REFINT 430 /* Refresh interval */
+
+ /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+ */
+#define CFG_BSTOPRE 192
+
+ /* Bit-field values for MCCR3.
+ */
+#define CFG_REFREC 2 /* Refresh to activate interval */
+#define CFG_RDLAT 3 /* Data latancy from read command */
+
+ /* Bit-field values for MCCR4.
+ */
+#define CFG_PRETOACT 2 /* Precharge to activate interval */
+#define CFG_ACTTOPRE 5 /* Activate to Precharge interval */
+#define CFG_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
+#define CFG_SDMODE_WRAP 0 /* SDMODE wrap type */
+#define CFG_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
+#define CFG_ACTORW 2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM 1
+#define CFG_REGDIMM 0
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START 0x00000000
+#define CFG_BANK0_END (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE 1
+#define CFG_BANK1_START 0x3ff00000
+#define CFG_BANK1_END 0x3fffffff
+#define CFG_BANK1_ENABLE 0
+#define CFG_BANK2_START 0x3ff00000
+#define CFG_BANK2_END 0x3fffffff
+#define CFG_BANK2_ENABLE 0
+#define CFG_BANK3_START 0x3ff00000
+#define CFG_BANK3_END 0x3fffffff
+#define CFG_BANK3_ENABLE 0
+#define CFG_BANK4_START 0x3ff00000
+#define CFG_BANK4_END 0x3fffffff
+#define CFG_BANK4_ENABLE 0
+#define CFG_BANK5_START 0x3ff00000
+#define CFG_BANK5_END 0x3fffffff
+#define CFG_BANK5_ENABLE 0
+#define CFG_BANK6_START 0x3ff00000
+#define CFG_BANK6_END 0x3fffffff
+#define CFG_BANK6_ENABLE 0
+#define CFG_BANK7_START 0x3ff00000
+#define CFG_BANK7_END 0x3fffffff
+#define CFG_BANK7_ENABLE 0
+
+#define CFG_ODCR 0xff
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
+#define CFG_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */
+#define INTEL_ID_28F160F3T 0x88F388F3 /* 16M = 1M x 16 top boot sector */
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+ /* Warining: environment is not EMBEDDED in the ppcboot code.
+ * It's stored in flash separately.
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x7C0000)
+#define CFG_ENV_SIZE 0x4000 /* Size of the Environment */
+#define CFG_ENV_OFFSET 0 /* starting right at the beginning */
+#define CFG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define SRAM_END 0x801FFFFF
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Memory Map */
+/*---------------------------------------------------------------------*/
+#define SRAM_BASE 0x80000000 /* SRAM base address */
+#define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
+#define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
+#define BCSR_BASE 0x80600000 /* board control / status registers */
+#define DISPLAY_BASE 0x80600040 /* DISPLAY base */
+#define PCMCIA_MEM_BASE 0x81000000 /* PCMCIA memory window base */
+#define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
+
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Control/Status Registers */
+/*---------------------------------------------------------------------*/
+#define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
+#define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
+#define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
+#define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
+#define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
+#define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
+#define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
+#define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
+
+/* IRQ_ENA_1 bit definitions */
+#define I_ENA_1_IERA 0x80 /* INTA enable */
+#define I_ENA_1_IERB 0x40 /* INTB enable */
+#define I_ENA_1_IERC 0x20 /* INTC enable */
+#define I_ENA_1_IERD 0x10 /* INTD enable */
+
+/* IRQ_STAT_1 bit definitions */
+#define I_STAT_1_INTA 0x80 /* INTA status */
+#define I_STAT_1_INTB 0x40 /* INTB status */
+#define I_STAT_1_INTC 0x20 /* INTC status */
+#define I_STAT_1_INTD 0x10 /* INTD status */
+
+/* IRQ_ENA_2 bit definitions */
+#define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
+#define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
+#define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
+#define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
+#define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
+#define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
+#define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
+#define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
+
+/* IRQ_STAT_2 bit definitions */
+#define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
+#define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
+#define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
+#define I_STAT_2_RTC 0x10 /* RTC IRQ status */
+#define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
+#define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
+#define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
+#define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
+
+/* BOARD_CTRL bit definitions */
+#define USER_LEDS 2 /* 2 user LEDs */
+
+#if (USER_LEDS == 4)
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE 0x20 /* Flash write enable */
+#define B_CTRL_FWPT 0x10 /* Flash write protect */
+#define B_CTRL_LED3 0x08 /* LED 3 control */
+#define B_CTRL_LED2 0x04 /* LED 2 control */
+#define B_CTRL_LED1 0x02 /* LED 1 control */
+#define B_CTRL_LED0 0x01 /* LED 0 control */
+#else
+#define B_CTRL_WRSE 0x80
+#define B_CTRL_KRSE 0x40
+#define B_CTRL_FWRE_1 0x20 /* Flash write enable */
+#define B_CTRL_FWPT_1 0x10 /* Flash write protect */
+#define B_CTRL_LED1 0x08 /* LED 1 control */
+#define B_CTRL_LED0 0x04 /* LED 0 control */
+#define B_CTRL_FWRE_0 0x02 /* Flash write enable */
+#define B_CTRL_FWPT_0 0x01 /* Flash write protect */
+#endif
+
+/* BOARD_STAT bit definitions */
+#define B_STAT_WDGE 0x80
+#define B_STAT_WDGS 0x40
+#define B_STAT_WRST 0x20
+#define B_STAT_KRST 0x10
+#define B_STAT_CSW3 0x08 /* sitch bit 3 status */
+#define B_STAT_CSW2 0x04 /* sitch bit 2 status */
+#define B_STAT_CSW1 0x02 /* sitch bit 1 status */
+#define B_STAT_CSW0 0x01 /* sitch bit 0 status */
+
+/*---------------------------------------------------------------------*/
+/* Display addresses */
+/*---------------------------------------------------------------------*/
+#define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
+#define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
+#define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
+
+#define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
+#define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
+
+#define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
+#define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
+#define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
+#define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
+#define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
+#define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
+#define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
+#define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI /* Multi ethernet cards support */
+
+#define CONFIG_EEPRO100
+
+#define PCI_ENET0_IOADDR 0x00104000
+#define PCI_ENET0_MEMADDR 0x82000000
+#define PCI_PLX9030_MEMADDR 0x82100000
+#endif /* __CONFIG_H */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index ae8525f9b9..9712d479c1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -171,7 +171,7 @@
CFG_CMD_EEPROM | \
CFG_CMD_DATE | \
CFG_CMD_I2C | \
- CFG_CMD_DOC)
+ CFG_CMD_DOC )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -329,8 +329,8 @@
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_ENV_OFFSET 0
-#define CFG_ENV_SIZE 2048
+#define CFG_ENV_OFFSET 512
+#define CFG_ENV_SIZE (2048 - 512)
#endif
/*
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index ed38ef6446..40ba25a62c 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -60,9 +60,10 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_BEDBUG | \
CFG_CMD_DHCP | \
CFG_CMD_PCI | \
- 0/* CFG_CMD_DATE */ )
+ 0 /* CFG_CMD_DATE */ )
/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
*/
@@ -302,4 +303,7 @@
#define CFG_ETH_DEV_FN 0x7800
#define CFG_ETH_IOBASE 0x00104000
+#define CONFIG_EEPRO100
+#define PCI_ENET0_IOADDR 0x00104000
+#define PCI_ENET0_MEMADDR 0x80000000
#endif /* __CONFIG_H */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
new file mode 100644
index 0000000000..e9561b9eb4
--- /dev/null
+++ b/include/configs/ELPT860.h
@@ -0,0 +1,390 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+** for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860 1 /* It's a MPC860, in fact a 860T CPU */
+#define CONFIG_MPC860T 1
+#define CONFIG_ELPT860 1 /* ...on a LEOX's ELPT860 CPU board */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* Clock passed to Linux (<2.4.5) in MHz */
+#define CONFIG_8xx_GCLK_FREQ 50000000 /* MPC860T runs at 50MHz */
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+/* BOOT arguments */
+#define CONFIG_PREBOOT \
+ "echo;" \
+ "echo Type \"run nfsboot\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "rootargs=setenv rootpath /tftp/$(ipaddr)\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):eth0:off panic=1\0" \
+ "ramboot=tftp 400000 /home/paugaml/pMulti;" \
+ "run ramargs;bootm\0" \
+ "nfsboot=tftp 400000 /home/paugaml/uImage;" \
+ "run rootargs;run nfsargs;run addip;bootm\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run ramboot"
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+#undef CONFIG_RTC_MPC8xx /* internal RTC MPC8xx unused */
+#define CONFIG_RTC_DS164x 1 /* RTC is a Dallas DS1646 */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DATE )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "LEOX_elpt860: " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Environment Variables and Storages
+ */
+#define CONFIG_ENV_OVERWRITE 1 /* Allow Overwrite of serial# & ethaddr */
+
+#undef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */
+#undef CFG_ENV_IS_IN_EEPROM /* Environment is in I2C EEPROM */
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment is in FLASH */
+
+#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_ETHADDR 00:01:77:00:60:40
+#define CONFIG_IPADDR 192.168.0.30
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_SERVERIP 192.168.0.1
+#define CONFIG_GATEWAYIP 192.168.0.1
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x02000000
+#define CFG_NVRAM_BASE 0x03000000
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# if defined(DEBUG)
+# define CFG_MONITOR_LEN (320 << 10) /* Reserve 320 kB for Monitor */
+# else
+# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+# endif
+#else
+# if defined(DEBUG)
+# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+# else
+# define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+# endif
+#endif
+
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+# define CFG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */
+# define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
+#endif
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */
+#define CFG_NVRAM_SIZE ((128*1024)-8) /* clock regs resident in the */
+ /* 8 top NVRAM locations */
+
+#if defined(CFG_ENV_IS_IN_NVRAM)
+# define CFG_ENV_ADDR CFG_NVRAM_BASE /* Base address of NVRAM area */
+# define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP)
+#else
+# define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR (SIUMCR_DBGC11)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC
+ * enabled
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit - leave PLL multiplication factor unchanged !
+ */
+#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler
+ *-----------------------------------------------------------------------
+ *
+ */
+#ifdef DEBUG
+# define CFG_DER 0xFFE7400F /* Debug Enable Register */
+#else
+# define CFG_DER 0
+#endif
+
+/*
+ * Init Memory Controller:
+ * ~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * BR0 and OR0 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_PRELIM_OR_AM 0xFF000000 /* 16 MB between each CSx */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
+
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM CFG_SDRAM_BASE /* SDRAM bank #0 */
+#define SDRAM_MAX_SIZE 0x02000000 /* 32 MB MAX for CS1 */
+
+/* SDRAM timing: */
+#define CFG_OR_TIMING_SDRAM 0x00000000
+
+#define CFG_OR1_PRELIM ((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM )
+#define CFG_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * BR2 and OR2 (NVRAM)
+ *
+ */
+#define NVRAM_BASE1_PRELIM CFG_NVRAM_BASE /* NVRAM bank #0 */
+#define NVRAM_MAX_SIZE 0x00020000 /* 128 KB MAX for CS2 */
+
+#define CFG_OR2_PRELIM 0xFFF80160
+#define CFG_BR2_PRELIM ((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+/*-----------------------------------------------------------------------
+ * Internal Definitions
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/*
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 6fa2d19c2f..d7dce71e31 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -35,6 +35,7 @@
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
#define CONFIG_IP860 1 /* ...on a IP860 board */
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
#define CONFIG_BAUDRATE 9600
@@ -45,10 +46,6 @@
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \
"\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0"
-#define CONFIG_ETHADDR 00:30:bf:01:02:d2
-#define CONFIG_IPADDR 10.0.0.5
-#define CONFIG_SERVERIP 10.0.0.2
-
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp; " \
@@ -230,10 +227,13 @@
SIUMCR_DBGC11 | SIUMCR_MLRC10)
/*-----------------------------------------------------------------------
- * Clock Setting - the IP860 has no 32kHz clock, so automatic detection fails
+ * Clock Setting - get clock frequency from Board Revision Register
*-----------------------------------------------------------------------
*/
-#define CONFIG_8xx_GCLK_FREQ 50000000
+#ifndef __ASSEMBLY__
+extern unsigned long ip860_get_clk_freq (void);
+#endif
+#define CONFIG_8xx_GCLK_FREQ ip860_get_clk_freq()
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
@@ -430,6 +430,8 @@ typedef struct ip860_bcsr_s {
unsigned char wd_trigger; /* +1A Watchdog trigger register */
unsigned char reservedD;
unsigned char rmw_req; /* +1C RMW request register */
+ unsigned char reservedE;
+ unsigned char bd_rev; /* +1E Board Revision register */
} ip860_bcsr_t;
#endif /* __ASSEMBLY__ */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index b56da695e8..d95596cadf 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -158,9 +158,9 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_BEDBUG | \
CFG_CMD_DATE | \
+ CFG_CMD_DOC | \
CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_DOC)
+ CFG_CMD_I2C )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -211,11 +211,11 @@
* Flash and Boot ROM mapping
*/
-#define CFG_BOOTROM_BASE 0x60000000
+#define CFG_BOOTROM_BASE 0xFF800000
#define CFG_BOOTROM_SIZE 0x00080000
-#define CFG_FLASH0_BASE 0x40000000
+#define CFG_FLASH0_BASE 0xFF000000
#define CFG_FLASH0_SIZE 0x02000000
-#define CFG_DOC_BASE 0x60000000
+#define CFG_DOC_BASE 0xFF800000
#define CFG_DOC_SIZE 0x00100000
@@ -245,8 +245,8 @@
#define CFG_I2C_EEPROM_ADDR_LEN 1
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-#define CFG_ENV_OFFSET 0
-#define CFG_ENV_SIZE 2048
+#define CFG_ENV_OFFSET 512
+#define CFG_ENV_SIZE (2048 - 512)
#endif
/*-----------------------------------------------------------------------
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 0750116246..6c37208c05 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -70,7 +70,7 @@
"root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
"loadp 100000; bootm"
- /* "tftpboot 100000 pImage; bootm" */
+ /* "tftpboot 100000 uImage; bootm" */
#else
/* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index ad36c95603..acfe747cec 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -75,7 +75,7 @@
"setenv filesize;saveenv\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
- "kernel_img=/tftpboot/pImage\0" \
+ "kernel_img=/tftpboot/uImage\0" \
"kernel_load=tftp 200000 $(kernel_img)\0" \
"net_nfs=run kernel_load nfsargs addip addtty;bootm\0" \
"flash_nfs=run nfsargs addip addtty;bootm $(kernel_addr)\0" \
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index bbd5939f2f..9ad1839154 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -74,7 +74,7 @@
#define CONFIG_IPADDR 10.0.0.98
#define CONFIG_SERVERIP 10.0.0.1
#undef CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND "tftp 200000 pImage;bootm 200000"
+#define CONFIG_BOOTCOMMAND "tftp 200000 uImage;bootm 200000"
/*----------------------------------------------------------------------*/
/*
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 6836326828..cc51ce6674 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -71,7 +71,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860L/pImage\0" \
+ "bootfile=/tftpboot/TQM860L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
""
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 71e08ce817..60aacfb762 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -67,7 +67,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860L/pImage\0" \
+ "bootfile=/tftpboot/TQM860L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
""
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index ac0e28a15e..37363a25ff 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -67,7 +67,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860L/pImage\0" \
+ "bootfile=/tftpboot/TQM860L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
""
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 5564b2310e..0d0b8c3162 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -67,7 +67,7 @@
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
- "bootfile=/tftpboot/TQM860L/pImage\0" \
+ "bootfile=/tftpboot/TQM860L/uImage\0" \
"kernel_addr=40040000\0" \
"ramdisk_addr=40100000\0" \
""
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 66c79356f4..fa466007c9 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -97,7 +97,7 @@
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip add_wdt addfb add_misc;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
- "net_nfs=tftp 100000 /tftpboot/pImage.lwmon;" \
+ "net_nfs=tftp 100000 /tftpboot/uImage.lwmon;" \
"run nfsargs addip add_wdt addfb;bootm\0" \
"rootpath=/opt/eldk/ppc_8xx\0" \
"load=tftp 100000 /tftpboot/u-boot.bin\0" \
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index a6464f0016..c617049f58 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -635,12 +635,15 @@ void board_init_r (gd_t *id, ulong dest_addr)
icache_enable (); /* it's time to enable the instruction cache */
#endif
-#if defined(CONFIG_BAB7xx)
+#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
/*
- * Do pci configuration on BAB 7xx _before_ the flash
- * is initialised, because we need the ISA bridge there.
+ * Do PCI configuration on BAB7xx and CPC45 _before_ the flash
+ * gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
+ * bridge there.
*/
pci_init ();
+#endif
+#if defined(CONFIG_BAB7xx)
/*
* Initialise the ISA bridge
*/
@@ -821,6 +824,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
#if (CONFIG_COMMANDS & CFG_CMD_NET) && ( \
defined(CONFIG_CCM) || \
+ defined(CONFIG_ELPT860) || \
defined(CONFIG_EP8260) || \
defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
diff --git a/rtc/Makefile b/rtc/Makefile
index 5d6c7f557a..5e471a6fd6 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = librtc.a
OBJS = date.o \
- ds1302.o ds1306.o ds1307.o ds1337.o ds1556.o ds174x.o \
+ ds1302.o ds1306.o ds1307.o ds1337.o ds1556.o ds164x.o ds174x.o \
m41t11.o m48t35ax.o mc146818.o mk48t59.o \
mpc8xx.o pcf8563.o
diff --git a/rtc/ds164x.c b/rtc/ds164x.c
new file mode 100644
index 0000000000..3f329c73cc
--- /dev/null
+++ b/rtc/ds164x.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2002
+ * ARIO Data Networks, Inc. dchiu@ariodata.com
+ *
+ * modified for DS164x:
+ * The LEOX team <team@leox.org>, http://www.leox.org
+ *
+ * Based on MontaVista DS1743 code and U-Boot mc146818 code
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Date & Time support for the DS164x RTC
+ */
+
+/* #define RTC_DEBUG */
+
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+
+
+#if defined(CONFIG_RTC_DS164x) && (CONFIG_COMMANDS & CFG_CMD_DATE)
+
+static uchar rtc_read(unsigned int addr );
+static void rtc_write(unsigned int addr, uchar val);
+static uchar bin2bcd(unsigned int n);
+static unsigned bcd2bin(uchar c);
+
+#define RTC_EPOCH 2000 /* century */
+
+/*
+ * DS164x registers layout
+ */
+#define RTC_BASE ( CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE )
+
+#define RTC_YEAR ( RTC_BASE + 0x07 )
+#define RTC_MONTH ( RTC_BASE + 0x06 )
+#define RTC_DAY_OF_MONTH ( RTC_BASE + 0x05 )
+#define RTC_DAY_OF_WEEK ( RTC_BASE + 0x04 )
+#define RTC_HOURS ( RTC_BASE + 0x03 )
+#define RTC_MINUTES ( RTC_BASE + 0x02 )
+#define RTC_SECONDS ( RTC_BASE + 0x01 )
+#define RTC_CONTROL ( RTC_BASE + 0x00 )
+
+#define RTC_CONTROLA RTC_CONTROL /* W=bit6, R=bit5 */
+#define RTC_CA_WRITE 0x80
+#define RTC_CA_READ 0x40
+#define RTC_CONTROLB RTC_SECONDS /* OSC=bit7 */
+#define RTC_CB_OSC_DISABLE 0x80
+#define RTC_CONTROLC RTC_DAY_OF_WEEK /* FT=bit6 */
+#define RTC_CC_FREQ_TEST 0x40
+
+/* ------------------------------------------------------------------------- */
+
+void rtc_get( struct rtc_time *tmp )
+{
+ uchar sec, min, hour;
+ uchar mday, wday, mon, year;
+
+ uchar reg_a;
+
+ reg_a = rtc_read( RTC_CONTROLA );
+ /* lock clock registers for read */
+ rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_READ ));
+
+ sec = rtc_read( RTC_SECONDS );
+ min = rtc_read( RTC_MINUTES );
+ hour = rtc_read( RTC_HOURS );
+ mday = rtc_read( RTC_DAY_OF_MONTH );
+ wday = rtc_read( RTC_DAY_OF_WEEK );
+ mon = rtc_read( RTC_MONTH );
+ year = rtc_read( RTC_YEAR );
+
+ /* unlock clock registers after read */
+ rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_READ ));
+
+#ifdef RTC_DEBUG
+ printf( "Get RTC year: %02x mon: %02x mday: %02x wday: %02x "
+ "hr: %02x min: %02x sec: %02x\n",
+ year, mon, mday, wday,
+ hour, min, sec );
+#endif
+ tmp->tm_sec = bcd2bin( sec & 0x7F );
+ tmp->tm_min = bcd2bin( min & 0x7F );
+ tmp->tm_hour = bcd2bin( hour & 0x3F );
+ tmp->tm_mday = bcd2bin( mday & 0x3F );
+ tmp->tm_mon = bcd2bin( mon & 0x1F );
+ tmp->tm_wday = bcd2bin( wday & 0x07 );
+
+ /* glue year in century (2000) */
+ tmp->tm_year = bcd2bin( year ) + RTC_EPOCH;
+
+ tmp->tm_yday = 0;
+ tmp->tm_isdst= 0;
+#ifdef RTC_DEBUG
+ printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
+#endif
+}
+
+void rtc_set( struct rtc_time *tmp )
+{
+ uchar reg_a;
+
+#ifdef RTC_DEBUG
+ printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+#endif
+ /* lock clock registers for write */
+ reg_a = rtc_read( RTC_CONTROLA );
+ rtc_write( RTC_CONTROLA, ( reg_a | RTC_CA_WRITE ));
+
+ rtc_write( RTC_MONTH, bin2bcd( tmp->tm_mon ));
+
+ rtc_write( RTC_DAY_OF_WEEK, bin2bcd( tmp->tm_wday ));
+ rtc_write( RTC_DAY_OF_MONTH, bin2bcd( tmp->tm_mday ));
+ rtc_write( RTC_HOURS, bin2bcd( tmp->tm_hour ));
+ rtc_write( RTC_MINUTES, bin2bcd( tmp->tm_min ));
+ rtc_write( RTC_SECONDS, bin2bcd( tmp->tm_sec ));
+
+ /* break year in century */
+ rtc_write( RTC_YEAR, bin2bcd( tmp->tm_year % 100 ));
+
+ /* unlock clock registers after read */
+ rtc_write( RTC_CONTROLA, ( reg_a & ~RTC_CA_WRITE ));
+}
+
+void rtc_reset (void)
+{
+ uchar reg_a, reg_b;
+
+ reg_a = rtc_read( RTC_CONTROLA );
+ reg_b = rtc_read( RTC_CONTROLB );
+
+ if ( reg_b & RTC_CB_OSC_DISABLE )
+ {
+ printf( "real-time-clock was stopped. Now starting...\n" );
+ reg_a |= RTC_CA_WRITE;
+ reg_b &= ~RTC_CB_OSC_DISABLE;
+
+ rtc_write( RTC_CONTROLA, reg_a );
+ rtc_write( RTC_CONTROLB, reg_b );
+ }
+
+ /* make sure read/write clock register bits are cleared */
+ reg_a &= ~( RTC_CA_WRITE | RTC_CA_READ );
+ rtc_write( RTC_CONTROLA, reg_a );
+}
+
+/* ------------------------------------------------------------------------- */
+
+static uchar rtc_read( unsigned int addr )
+{
+ uchar val = *(volatile unsigned char*)(addr);
+
+#ifdef RTC_DEBUG
+ printf( "rtc_read: %x:%x\n", addr, val );
+#endif
+ return( val );
+}
+
+static void rtc_write( unsigned int addr, uchar val )
+{
+#ifdef RTC_DEBUG
+ printf( "rtc_write: %x:%x\n", addr, val );
+#endif
+ *(volatile unsigned char*)(addr) = val;
+}
+
+static unsigned bcd2bin (uchar n)
+{
+ return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F));
+}
+
+static unsigned char bin2bcd (unsigned int n)
+{
+ return (((n / 10) << 4) | (n % 10));
+}
+
+#endif /* CONFIG_RTC_DS164x && CFG_CMD_DATE */
diff --git a/tools/env/fw_env_main.c b/tools/env/fw_env_main.c
index 1c22e7143d..696e30efda 100644
--- a/tools/env/fw_env_main.c
+++ b/tools/env/fw_env_main.c
@@ -22,7 +22,7 @@
*/
/*
- * Command line user interface to firmware (=PPCBoot) environment.
+ * Command line user interface to firmware (=U-Boot) environment.
*
* Implements:
* fw_printenv [ name ... ]