summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README8
-rw-r--r--arch/arm/lib/bootm.c30
-rw-r--r--common/cmd_bootm.c141
-rw-r--r--include/config_cmd_all.h1
4 files changed, 171 insertions, 9 deletions
diff --git a/README b/README
index 92a11b4e11f..a9dc69bae05 100644
--- a/README
+++ b/README
@@ -3609,6 +3609,7 @@ go - start application at address 'addr'
run - run commands in an environment variable
bootm - boot application image from memory
bootp - boot image via network using BootP/TFTP protocol
+bootz - boot zImage from memory
tftpboot- boot image via network using TFTP protocol
and env variables "ipaddr" and "serverip"
(and eventually "gatewayip")
@@ -4429,6 +4430,13 @@ U-Boot supports the following image types:
useful when you configure U-Boot to use a real shell (hush)
as command interpreter.
+Booting the Linux zImage:
+-------------------------
+
+On some platforms, it's possible to boot Linux zImage. This is done
+using the "bootz" command. The syntax of "bootz" command is the same
+as the syntax of "bootm" command.
+
Standalone HOWTO:
=================
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 160ba551111..1c1bee6aeb1 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -359,3 +359,33 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
boot_jump_linux(images);
return 0;
}
+
+#ifdef CONFIG_CMD_BOOTZ
+
+struct zimage_header {
+ uint32_t code[9];
+ uint32_t zi_magic;
+ uint32_t zi_start;
+ uint32_t zi_end;
+};
+
+#define LINUX_ARM_ZIMAGE_MAGIC 0x016f2818
+
+int bootz_setup(void *image, void **start, void **end)
+{
+ struct zimage_header *zi = (struct zimage_header *)image;
+
+ if (zi->zi_magic != LINUX_ARM_ZIMAGE_MAGIC) {
+ puts("Bad Linux ARM zImage magic!\n");
+ return 1;
+ }
+
+ *start = (void *)zi->zi_start;
+ *end = (void *)zi->zi_end;
+
+ debug("Kernel image @ 0x%08x [ 0x%08x - 0x%08x ]\n",
+ (uint32_t)image, (uint32_t)*start, (uint32_t)*end);
+
+ return 0;
+}
+#endif /* CONFIG_CMD_BOOTZ */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index d88f6c0253a..5e5d572ebf2 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -169,25 +169,25 @@ void arch_preboot_os(void) __attribute__((weak, alias("__arch_preboot_os")));
#define IH_INITRD_ARCH IH_ARCH_DEFAULT
-static void bootm_start_lmb(void)
-{
#ifdef CONFIG_LMB
+static void boot_start_lmb(bootm_headers_t *images)
+{
ulong mem_start;
phys_size_t mem_size;
- lmb_init(&images.lmb);
+ lmb_init(&images->lmb);
mem_start = getenv_bootm_low();
mem_size = getenv_bootm_size();
- lmb_add(&images.lmb, (phys_addr_t)mem_start, mem_size);
+ lmb_add(&images->lmb, (phys_addr_t)mem_start, mem_size);
- arch_lmb_reserve(&images.lmb);
- board_lmb_reserve(&images.lmb);
+ arch_lmb_reserve(&images->lmb);
+ board_lmb_reserve(&images->lmb);
+}
#else
-# define lmb_reserve(lmb, base, size)
+static inline void boot_start_lmb(bootm_headers_t *images) { }
#endif
-}
static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
@@ -197,7 +197,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
memset((void *)&images, 0, sizeof(images));
images.verify = getenv_yesno("verify");
- bootm_start_lmb();
+ boot_start_lmb(&images);
bootstage_mark_name(BOOTSTAGE_ID_BOOTM_START, "bootm_start");
@@ -1518,3 +1518,126 @@ static int do_bootm_integrity(int flag, int argc, char * const argv[],
return 1;
}
#endif
+
+#ifdef CONFIG_CMD_BOOTZ
+
+static int __bootz_setup(void *image, void **start, void **end)
+{
+ /* Please define bootz_setup() for your platform */
+
+ puts("Your platform's zImage format isn't supported yet!\n");
+ return -1;
+}
+int bootz_setup(void *image, void **start, void **end)
+ __attribute__((weak, alias("__bootz_setup")));
+
+/*
+ * zImage booting support
+ */
+static int bootz_start(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[], bootm_headers_t *images)
+{
+ int ret;
+ void *zi_start, *zi_end;
+
+ memset(images, 0, sizeof(bootm_headers_t));
+
+ boot_start_lmb(images);
+
+ /* Setup Linux kernel zImage entry point */
+ if (argc < 2) {
+ images->ep = load_addr;
+ debug("* kernel: default image load address = 0x%08lx\n",
+ load_addr);
+ } else {
+ images->ep = simple_strtoul(argv[1], NULL, 16);
+ debug("* kernel: cmdline image address = 0x%08lx\n",
+ images->ep);
+ }
+
+ ret = bootz_setup((void *)images->ep, &zi_start, &zi_end);
+ if (ret != 0)
+ return 1;
+
+ lmb_reserve(&images->lmb, images->ep, zi_end - zi_start);
+
+ /* Find ramdisk */
+ ret = boot_get_ramdisk(argc, argv, images, IH_INITRD_ARCH,
+ &images->rd_start, &images->rd_end);
+ if (ret) {
+ puts("Ramdisk image is corrupt or invalid\n");
+ return 1;
+ }
+
+#if defined(CONFIG_OF_LIBFDT)
+ /* find flattened device tree */
+ ret = boot_get_fdt(flag, argc, argv, images,
+ &images->ft_addr, &images->ft_len);
+ if (ret) {
+ puts("Could not find a valid device tree\n");
+ return 1;
+ }
+
+ set_working_fdt_addr(images->ft_addr);
+#endif
+
+ return 0;
+}
+
+static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ ulong iflag;
+ bootm_headers_t images;
+
+ if (bootz_start(cmdtp, flag, argc, argv, &images))
+ return 1;
+
+ /*
+ * We have reached the point of no return: we are going to
+ * overwrite all exception vector code, so we cannot easily
+ * recover from any failures any more...
+ */
+ iflag = disable_interrupts();
+
+#if defined(CONFIG_CMD_USB)
+ /*
+ * turn off USB to prevent the host controller from writing to the
+ * SDRAM while Linux is booting. This could happen (at least for OHCI
+ * controller), because the HCCA (Host Controller Communication Area)
+ * lies within the SDRAM and the host controller writes continously to
+ * this area (as busmaster!). The HccaFrameNumber is for example
+ * updated every 1 ms within the HCCA structure in SDRAM! For more
+ * details see the OpenHCI specification.
+ */
+ usb_stop();
+#endif
+
+#ifdef CONFIG_SILENT_CONSOLE
+ fixup_silent_linux();
+#endif
+ arch_preboot_os();
+
+ do_bootm_linux(0, argc, argv, &images);
+#ifdef DEBUG
+ puts("\n## Control returned to monitor - resetting...\n");
+#endif
+ do_reset(cmdtp, flag, argc, argv);
+
+ return 1;
+}
+
+U_BOOT_CMD(
+ bootz, CONFIG_SYS_MAXARGS, 1, do_bootz,
+ "boot Linux zImage image from memory",
+ "[addr [initrd] [fdt]]\n - boot Linux zImage stored in memory\n"
+ "\tThe argument 'initrd' is optional and specifies the address\n"
+ "\tof the initrd in memory.\n"
+#if defined(CONFIG_OF_LIBFDT)
+ "\tWhen booting a Linux kernel which requires a flat device-tree\n"
+ "\ta third argument is required which is the address of the\n"
+ "\tdevice-tree blob. To boot that kernel without an initrd image,\n"
+ "\tuse a '-' for the second argument. If you do not pass a third\n"
+ "\ta bd_info struct will be passed instead\n"
+#endif
+);
+#endif /* CONFIG_CMD_BOOTZ */
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 9716f9cad47..2c6b8295fb8 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -20,6 +20,7 @@
#define CONFIG_CMD_BEDBUG /* Include BedBug Debugger */
#define CONFIG_CMD_BMP /* BMP support */
#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_BOOTZ /* boot zImage */
#define CONFIG_CMD_BSP /* Board Specific functions */
#define CONFIG_CMD_CACHE /* icache, dcache */
#define CONFIG_CMD_CDP /* Cisco Discovery Protocol */