summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG440
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL25
-rw-r--r--Makefile6
-rw-r--r--README10
-rw-r--r--board/amcc/katmai/Makefile51
-rw-r--r--board/amcc/katmai/cmd_katmai.c267
-rw-r--r--board/amcc/katmai/config.mk38
-rw-r--r--board/amcc/katmai/init.S108
-rw-r--r--board/amcc/katmai/katmai.c514
-rw-r--r--board/amcc/katmai/katmai.h65
-rw-r--r--board/amcc/katmai/u-boot.lds141
-rw-r--r--board/cray/L1/L1.c2
-rw-r--r--board/esd/common/auto_update.c3
-rw-r--r--board/esd/cpci750/cpci750.c22
-rw-r--r--board/esd/du405/du405.c2
-rw-r--r--board/lpc2292sodimm/lpc2292sodimm.c2
-rw-r--r--board/mcc200/auto_update.c187
-rw-r--r--board/mcc200/lcd.c31
-rw-r--r--board/motionpro/Makefile50
-rw-r--r--board/motionpro/config.mk30
-rw-r--r--board/motionpro/motionpro.c172
-rw-r--r--board/motionpro/u-boot.lds123
-rw-r--r--board/mpl/common/memtst.c2
-rw-r--r--board/mpl/mip405/mip405.c5
-rw-r--r--board/prodrive/p3mx/p3mx.h1
-rw-r--r--board/sandburst/common/ppc440gx_i2c.c7
-rw-r--r--board/sandburst/common/ppc440gx_i2c.h6
-rw-r--r--board/trab/auto_update.c1
-rw-r--r--board/xilinx/ml300/Makefile2
-rw-r--r--board/xilinx/ml300/ml300.c2
-rw-r--r--board/xilinx/ml300/serial.c3
-rw-r--r--board/xilinx/xilinx_enet/emac_adapter.c2
-rw-r--r--board/xilinx/xilinx_enet/xemac.h2
-rw-r--r--board/xilinx/xilinx_enet/xemac_g.c2
-rw-r--r--board/xilinx/xilinx_iic/iic_adapter.c2
-rw-r--r--common/Makefile3
-rw-r--r--common/cmd_ace.c267
-rw-r--r--common/cmd_date.c14
-rw-r--r--common/cmd_dtt.c12
-rw-r--r--common/cmd_ext2.c40
-rw-r--r--common/cmd_fat.c37
-rw-r--r--common/cmd_ide.c16
-rw-r--r--common/cmd_mem.c65
-rw-r--r--common/cmd_reiser.c40
-rw-r--r--common/cmd_scsi.c6
-rw-r--r--common/cmd_usb.c1
-rw-r--r--common/ft_build.c6
-rw-r--r--common/usb_storage.c7
-rw-r--r--cpu/mpc5xxx/fec.c8
-rw-r--r--cpu/ppc4xx/40x_spd_sdram.c469
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c (renamed from cpu/ppc4xx/spd_sdram.c)419
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c2759
-rw-r--r--cpu/ppc4xx/Makefile3
-rw-r--r--cpu/ppc4xx/cpu_init.c2
-rw-r--r--cpu/ppc4xx/i2c.c458
-rw-r--r--cpu/ppc4xx/speed.c13
-rw-r--r--cpu/ppc4xx/start.S57
-rw-r--r--cpu/ppc4xx/tlb.c184
-rw-r--r--cpu/pxa/mmc.c4
-rw-r--r--disk/part.c53
-rw-r--r--drivers/Makefile2
-rw-r--r--drivers/cfi_flash.c16
-rw-r--r--drivers/systemace.c252
-rw-r--r--dtt/adm1021.c13
-rw-r--r--include/405gp_i2c.h64
-rw-r--r--include/440_i2c.h71
-rw-r--r--include/4xx_i2c.h122
-rw-r--r--include/asm-arm/io.h4
-rw-r--r--include/asm-avr32/io.h4
-rw-r--r--include/asm-blackfin/io.h5
-rw-r--r--include/asm-i386/io.h4
-rw-r--r--include/asm-m68k/io.h9
-rw-r--r--include/asm-microblaze/io.h4
-rw-r--r--include/asm-mips/io.h4
-rw-r--r--include/asm-nios/io.h4
-rw-r--r--include/asm-nios2/io.h5
-rw-r--r--include/asm-ppc/io.h11
-rw-r--r--include/asm-ppc/mmu.h208
-rw-r--r--include/common.h1
-rw-r--r--include/configs/katmai.h415
-rw-r--r--include/configs/mcc200.h1
-rw-r--r--include/configs/mecp5200.h58
-rw-r--r--include/configs/motionpro.h305
-rw-r--r--include/configs/sc3.h2
-rw-r--r--include/configs/sequoia.h4
-rw-r--r--include/i2c.h10
-rw-r--r--include/ide.h6
-rw-r--r--include/part.h15
-rw-r--r--include/ppc405.h1
-rw-r--r--include/ppc440.h9
-rw-r--r--lib_generic/display_options.c70
92 files changed, 7523 insertions, 1446 deletions
diff --git a/CHANGELOG b/CHANGELOG
index ff386c9c3a0..6e26105c2a1 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,443 @@
+commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Tue Feb 27 12:40:16 2007 +0300
+
+ MCC200 update - add LCD Progress Indicator
+
+commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 22 07:43:34 2007 +0100
+
+ [PATCH] get_dev() now unconditionally uses manual relocation
+
+ Since the relocation fix is not included yet and we're not sure how
+ it will be added, this patch removes code that required relocation
+ to be fixed for now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 22 07:40:23 2007 +0100
+
+ [PATCH] Change systemace driver to select 8 & 16bit mode
+
+ As suggested by Grant Likely this patch enables the Xilinx SystemACE
+ driver to select 8 or 16bit mode upon startup.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Wed Feb 21 16:52:31 2007 +0100
+
+ [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
+
+ Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
+ is fully finished. The sync() is defined in each CPU's io.h file. For
+ those CPUs which do not need sync for now, a dummy sync() is defined in
+ their io.h as well.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+
+commit da04995c7dc6772013a9a0dc5c767f190c402478
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 21 13:44:34 2007 +0100
+
+ [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 751bb57107d78978ae08e697c3deba816f5be091
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:21:57 2007 +0100
+
+ [PATCH] Fix relocation problem with "new" get_dev() function
+
+ This patch enables the "new" get_dev() function for block devices
+ introduced by Grant Likely to be used on systems that still suffer
+ from the relocation problems (manual relocation neede because of
+ problems with linker script).
+
+ Hopefully we can resolve this relocation issue soon for all platform
+ so we don't need this additional code anymore.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d93e2212f962668b3dce091ff5edc33f2347fe37
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:17:42 2007 +0100
+
+ [PATCH] Update SystemACE driver for 16bit access
+
+ This patch removes some problems when the Xilinx SystemACE driver
+ is used with 16bit access on an big endian platform (like the
+ AMCC Katmai).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 13:15:40 2007 +0100
+
+ [PATCH] Clean up Katmai (440SPe) linker script
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:57:08 2007 +0100
+
+ [PATCH] Add support for the AMCC Katmai (440SPe) eval board
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:51:26 2007 +0100
+
+ [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
+
+ This patch switches to the desired I2C bus when the date/dtt
+ commands are called. This can be configured using the
+ CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:43:34 2007 +0100
+
+ [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
+
+ This patch adds support for the DDR2 controller used on the
+ 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
+ board and works fine with the following DIMM modules:
+
+ - Corsair CM2X512-5400C4 (512MByte per DIMM)
+ - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
+ - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
+
+ This patch also adds the nice functionality to dynamically
+ create the TLB entries for the SDRAM (tlb.c). So we should
+ never run into such problems with wrong (too short) TLB
+ initialization again on these platforms.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 36d830c9830379045f5daa9f542ac1c990c70068
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:35:42 2007 +0100
+
+ [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
+
+ Since the existing 4xx SPD SDRAM initialization routines for the
+ 405 SDRAM controller and the 440 DDR controller don't have much in
+ common this patch splits both drivers into different files.
+
+ This is in preparation for the 440 DDR2 controller support (440SP/e).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Feb 20 10:27:08 2007 +0100
+
+ [PATCH] PPC4xx: Add support for multiple I2C busses
+
+ This patch adds support for multiple I2C busses on the PPC4xx
+ platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
+ to make use of this feature.
+
+ It also merges the 405 and 440 i2c header files into one common
+ file 4xx_i2c.h.
+
+ Also the 4xx i2c reset procedure is reworked since I experienced
+ some problems with the first access on the 440SPe Katmai board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit eb867a76238fb38e952c37871b16d0d7fd61c95f
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:45 2007 +0100
+
+ [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
+
+ Block device read/write is anonymous data; there is no need to use a
+ typed pointer. void * is fine. Also add a hook for block_read functions
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 53758fa20e935cc87eeb0519ed365df753a6f289
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:38 2007 +0100
+
+ [PATCH 8_9] Add block_write hook to block_dev_desc_t
+
+ Preparation for future patches which support block device writing
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f4852ebe6ca946a509667eb68be42026f837be76
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:31 2007 +0100
+
+ [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
+
+ Register read/write does not need to be wrapped in a full function. The
+ patch replaces them with macros.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:23 2007 +0100
+
+ [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
+
+ The code in this file is not a command; it is a device driver. Put it in
+ the correct place. There are zero functional changes in this patch, it
+ only moves the file.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:16 2007 +0100
+
+ [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
+
+ This patch is in preparation of additional changes to the sysace driver.
+ May as well take this opportunity to fixup the inconsistent whitespace since
+ this file is about to undergo major changes anyway.
+
+ There are zero functional changes in this patch. It only cleans up the
+ the whitespace.
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 80ba981d940471fe7e539e64fa3d2bd80002beda
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:07 2007 +0100
+
+ [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
+
+ isprint is already defined in ctype.c
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:05:00 2007 +0100
+
+ [PATCH 3_9] Move buffer print code from md command to common function
+
+ Printing a buffer is a darn useful thing. Move the buffer print code
+ into print_buffer() in lib_generic/
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:04:52 2007 +0100
+
+ [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
+
+ Change the xilinx device drivers and board code to include config.h
+ instead of xparameters.h directly. config.h always includes the
+ correct xparameters file. This change reduces the posibility of
+ including the wrong file when adding a new xilinx board port
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
+Author: Grant Likely <grant.likely@secretlab.ca>
+Date: Tue Feb 20 09:04:34 2007 +0100
+
+ [PATCH 1_4] Merge common get_dev() routines for block devices
+
+ Each of the filesystem drivers duplicate the get_dev routine. This change
+ merges them into a single function in part.c
+
+ Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+
+commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Mon Feb 19 23:09:51 2007 +0100
+
+ MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
+ as root file system images.
+
+commit 489c696ae7211218961d159e43e722d74c36fcbc
+Author: Sergei Poselenov <sposelenov@emcraft.com>
+Date: Wed Feb 14 14:30:28 2007 +0300
+
+ MCC200: Extensions to Software Update Mechanism
+
+ Update / extend Software Update Mechanism for MCC200 board:
+
+ - Add support for rootfs image added. The environment variables
+ "rootfs_st" and "rootfs_nd" can be used to override the default
+ values of the image start and end.
+ - Remove excessive key check code.
+ - Code cleanup.
+
+commit 4be23a12f23f1372634edc3215137b09768b7949
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 19 08:23:15 2007 +0100
+
+ [PATCH] Update Sequoia EBC configuration (NOR FLASH)
+
+ As spotted by Matthias Fuchs, the READY input should not be
+ enabled for the NOR FLASH on the Sequoia board.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 497d012e5be0194e1084073d0081eb1a844796b2
+Author: Gary Jennejohn <garyj@pollux.denx.de>
+Date: Mon Feb 12 13:11:50 2007 +0100
+
+ LPC2292: patch from Siemens.
+
+commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Feb 10 08:49:31 2007 +0100
+
+ [PATCH] Add missing p3mx.h file to repository (ups)
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
+Author: Bartlomiej Sieka <tur@semihalf.com>
+Date: Fri Feb 9 10:45:42 2007 +0100
+
+ [Motion-PRO] Preliminary support for the Motion-PRO board.
+
+commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 7 16:51:08 2007 +0100
+
+ [PATCH] Update some AMCC 4xx board config files (set initrd_high)
+
+ Some boards that can have more than 768MBytes of SDRAM need to
+ set "initrd_high", so that the initrd can be accessed by the
+ Linux kernel.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 7372ca68227930d03cffa548310524cad5b96733
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 2 12:44:22 2007 +0100
+
+ [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
+
+ Previously the strapping DCR/SDR was read to determine if the internal PCI
+ arbiter is enabled or not. This strapping bit can be overridden, so now
+ the current status is read from the correct DCR/SDR register.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2aa54f651a42d198673318f07a20c89a43e4d197
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Feb 2 12:42:08 2007 +0100
+
+ [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Feb 1 13:22:41 2007 +0100
+
+ [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
+
+ When PCI PNP is enabled the pci pnp configuration routine is called
+ which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
+ problems with some PCI cards. For now disable the PCI PNP configuration.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2902fadade3be7659467e8d074048c6b7068f5c0
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:56:10 2007 +0100
+
+ [PATCH] Update 440EPx/440GRx cpu detection
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d5ea287b02a6945c3977410e364a879dd1a555c8
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:38:04 2007 +0100
+
+ [PATCH] Update esd cpci5200 files
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 16:37:34 2007 +0100
+
+ [PATCH] Add support for esd mecp5200 board
+
+ Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+
+commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Jan 31 12:38:50 2007 +0100
+
+ [PATCH] Remove unneccessary yellowstone board config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e802594b6fa1b166308820c276b96dc0d7cc731c
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 17:06:10 2007 +0100
+
+ [PATCH] Update Sequoia (440EPx) config file
+
+ The config file now handles the 2nd target, the Rainier (440GRx)
+ evaluation board better. Additionally the PPC input clock was
+ adjusted to match the correct value of 33.0 MHz.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 700200c67e73b83751418abe7815840dca8fd6cb
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 17:04:19 2007 +0100
+
+ [PATCH] Merge Yosemite & Yellowstone board ports
+
+ Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
+ share one config file and all board specific files. This way we
+ don't have to maintain two different sets of files for nearly
+ identical boards.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 15:01:49 2007 +0100
+
+ [PATCH] Update Prodrive SCPU (PDNB3 variant) board
+
+ SCPU doesn't use redundant environment in flash.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Jan 30 12:51:07 2007 +0100
+
+ [PATCH] alpr: Update alpr board config file
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f8db84f132b1e335f20f96138a1f09ed97b08664
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Tue Jan 30 00:50:40 2007 +0100
+
+ LPC2292 SODIMM port coding style cleanup.
+
commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
Author: Gary Jennejohn <garyj@pollux.denx.de>
Date: Wed Jan 24 12:16:56 2007 +0100
diff --git a/MAINTAINERS b/MAINTAINERS
index f90c5a65ff2..1d0a8dfdb31 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -288,6 +288,7 @@ Stefan Roese <sr@denx.de>
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
+ katmai PPC440SPe
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
diff --git a/MAKEALL b/MAKEALL
index f61517dda46..1772ae3579b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -37,9 +37,10 @@ LIST_5xx=" \
LIST_5xxx=" \
BC3450 cpci5200 EVAL5200 fo300 \
icecube_5100 icecube_5200 lite5200b mcc200 \
- mecp5200 o2dnt pf5200 PM520 \
- TB5200 Total5100 Total5200 Total5200_Rev2 \
- TQM5200 TQM5200_B TQM5200S v38b \
+ mecp5200 motionpro o2dnt pf5200 \
+ PM520 TB5200 Total5100 Total5200 \
+ Total5200_Rev2 TQM5200 TQM5200_B TQM5200S \
+ v38b \
"
#########################################################################
@@ -81,15 +82,15 @@ LIST_4xx=" \
CRAYL1 csb272 csb472 DASA_SIM \
DP405 DU405 ebony ERIC \
EXBITGEN G2000 HH405 HUB405 \
- JSE KAREF luan METROBOX \
- MIP405 MIP405T ML2 ml300 \
- ocotea OCRTC ORSG p3p440 \
- PCI405 pcs440ep PIP405 PLU405 \
- PMC405 PPChameleonEVB sbc405 sc3 \
- sequoia sequoia_nand taishan VOH405 \
- VOM405 W7OLMC W7OLMG walnut \
- WUH405 XPEDITE1K yellowstone yosemite \
- yucca \
+ JSE KAREF katmai luan \
+ METROBOX MIP405 MIP405T ML2 \
+ ml300 ocotea OCRTC ORSG \
+ p3p440 PCI405 pcs440ep PIP405 \
+ PLU405 PMC405 PPChameleonEVB sbc405 \
+ sc3 sequoia sequoia_nand taishan \
+ VOH405 VOM405 W7OLMC W7OLMG \
+ walnut WUH405 XPEDITE1K yellowstone \
+ yosemite yucca \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 49f0903ce0c..0bd03a2ae73 100644
--- a/Makefile
+++ b/Makefile
@@ -607,6 +607,9 @@ TQM5200_STK100_config: unconfig
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
+motionpro_config: unconfig
+ @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
+
#########################################################################
## MPC8xx Systems
@@ -1092,6 +1095,9 @@ JSE_config: unconfig
KAREF_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
+katmai_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
diff --git a/README b/README
index a8eaa5f2b1a..0ba9f5b9f12 100644
--- a/README
+++ b/README
@@ -1347,6 +1347,16 @@ The following options need to be configured:
If defined, then this indicates the I2C bus number for DDR SPD.
If not defined, then U-Boot assumes that SPD is on I2C bus 0.
+ CFG_RTC_BUS_NUM
+
+ If defined, then this indicates the I2C bus number for the RTC.
+ If not defined, then U-Boot assumes that RTC is on I2C bus 0.
+
+ CFG_DTT_BUS_NUM
+
+ If defined, then this indicates the I2C bus number for the DTT.
+ If not defined, then U-Boot assumes that DTT is on I2C bus 0.
+
CONFIG_FSL_I2C
Define this option if you want to use Freescale's I2C driver in
diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile
new file mode 100644
index 00000000000..d06a402d175
--- /dev/null
+++ b/board/amcc/katmai/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o cmd_katmai.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
new file mode 100644
index 00000000000..684f6a58637
--- /dev/null
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -0,0 +1,267 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/byteorder.h>
+
+static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ uchar chip;
+ ulong data;
+ int nbytes;
+ extern char console_buffer[];
+
+ char sysClock[4];
+ char cpuClock[4];
+ char plbClock[4];
+ char pcixClock[4];
+
+ if (argc < 3) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (strcmp(argv[2], "prom0") == 0)
+ chip = IIC0_BOOTPROM_ADDR;
+ else
+ chip = IIC0_ALT_BOOTPROM_ADDR;
+
+ do {
+ printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0))
+ nbytes=0;
+
+ strcpy(sysClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ do {
+ if (strcmp(sysClock, "66") == 0) {
+ printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+ } else {
+#ifdef CONFIG_STRESS
+ printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+#else
+ printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+#endif
+ }
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ } else {
+ if ((strcmp(console_buffer, "400") != 0) &
+ (strcmp(console_buffer, "500") != 0) &
+ (strcmp(console_buffer, "533") != 0)
+#ifdef CONFIG_STRESS
+ & (strcmp(console_buffer, "667") != 0)
+#endif
+ ) {
+ nbytes = 0;
+ }
+ }
+
+ strcpy(cpuClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ if (strcmp(cpuClock, "500") == 0)
+ strcpy(plbClock, "166");
+ else if (strcmp(cpuClock, "533") == 0)
+ strcpy(plbClock, "133");
+ else {
+ do {
+ if (strcmp(cpuClock, "400") == 0)
+ printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0)
+ printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+
+#endif
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if (strcmp(cpuClock, "400") == 0) {
+ if ((strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0))
+ nbytes = 0;
+ }
+#ifdef CONFIG_STRESS
+ if (strcmp(cpuClock, "667") == 0) {
+ if ((strcmp(console_buffer, "133") != 0) &
+ (strcmp(console_buffer, "166") != 0))
+ nbytes = 0;
+ }
+#endif
+ strcpy(plbClock, console_buffer);
+
+ } while (nbytes == 0);
+ }
+
+ do {
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ nbytes = readline (" ? ");
+
+ if (strcmp(console_buffer, "quit") == 0)
+ return 0;
+
+ if ((strcmp(console_buffer, "33") != 0) &
+ (strcmp(console_buffer, "66") != 0) &
+ (strcmp(console_buffer, "100") != 0) &
+ (strcmp(console_buffer, "133") != 0)) {
+ nbytes = 0;
+ }
+ strcpy(pcixClock, console_buffer);
+
+ } while (nbytes == 0);
+
+ printf("\nsys clk = %sMhz\n", sysClock);
+ printf("cpu clk = %sMhz\n", cpuClock);
+ printf("plb clk = %sMhz\n", plbClock);
+ printf("Pci-X clk = %sMhz\n", pcixClock);
+
+ do {
+ printf("\npress [y] to write I2C bootstrap \n");
+ printf("or [n] to abort. \n");
+ printf("Don't forget to set board switches \n");
+ printf("according to your choice before re-starting \n");
+ printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n");
+
+ nbytes = readline (" ? ");
+ if (strcmp(console_buffer, "n") == 0)
+ return 0;
+
+ } while (nbytes == 0);
+
+ if (strcmp(sysClock, "33") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x8678c206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8678c2c6;
+
+ if ((strcmp(cpuClock, "500") == 0))
+ data = 0x8778f2c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x87790252;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x87794256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x87794206;
+
+#endif
+ }
+ if (strcmp(sysClock, "66") == 0) {
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "100") == 0))
+ data = 0x84706206;
+
+ if ((strcmp(cpuClock, "400") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x847062c6;
+
+ if ((strcmp(cpuClock, "533") == 0))
+ data = 0x85708206;
+
+#ifdef CONFIG_STRESS
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "133") == 0))
+ data = 0x8570a256;
+
+ if ((strcmp(cpuClock, "667") == 0) &
+ (strcmp(plbClock, "166") == 0))
+ data = 0x8570a206;
+
+#endif
+ }
+
+#ifdef DEBUG
+ printf(" pin strap0 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap0 in %s\n", argv[2]);
+
+ if (strcmp(pcixClock, "33") == 0)
+ data = 0x00000701;
+
+ if (strcmp(pcixClock, "66") == 0)
+ data = 0x00000601;
+
+ if (strcmp(pcixClock, "100") == 0)
+ data = 0x00000501;
+
+ if (strcmp(pcixClock, "133") == 0)
+ data = 0x00000401;
+
+ if (strcmp(plbClock, "166") == 0)
+ data |= 0x05950000;
+ else
+ data |= 0x05A50000;
+
+#ifdef DEBUG
+ printf(" pin strap1 to write in i2c = %x\n", data);
+#endif /* DEBUG */
+
+ udelay(1000);
+ if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0)
+ printf("Error writing strap1 in %s\n", argv[2]);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ bootstrap, 3, 1, do_bootstrap,
+ "bootstrap - program the serial device strap\n",
+ "wrclk [prom0|prom1] - program the serial device strap\n"
+ );
diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk
new file mode 100644
index 00000000000..115c1aed053
--- /dev/null
+++ b/board/amcc/katmai/config.mk
@@ -0,0 +1,38 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440SPe Evaluation (Katmai) board
+#
+
+TEXT_BASE = 0xfffc0000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S
new file mode 100644
index 00000000000..f5900bcb7b5
--- /dev/null
+++ b/board/amcc/katmai/init.S
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+
+/**************************************************************************
+ * TLB table for revA
+ *************************************************************************/
+ .globl tlbtabA
+tlbtabA:
+ tlbtab_start
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
+
+/**************************************************************************
+ * TLB table for revB
+ *
+ * Notice: revB of the 440SPe chip is very strict about PLB real addresses
+ * and ranges to be mapped for config space: it seems to only work with
+ * d_nnnn_nnnn range (hangs the core upon config transaction attempts when
+ * set otherwise) while revA uses c_nnnn_nnnn.
+ *************************************************************************/
+ .globl tlbtabB
+tlbtabB:
+ tlbtab_start
+ tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G)
+
+ /*
+ * TLB entries for SDRAM are not needed on this platform.
+ * They are dynamically generated in the SPD DDR(2) detection
+ * routine.
+ */
+
+ tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+
+ tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+
+ tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I)
+ tlbtab_end
diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
new file mode 100644
index 00000000000..8704925a9cb
--- /dev/null
+++ b/board/amcc/katmai/katmai.c
@@ -0,0 +1,514 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <asm-ppc/io.h>
+
+#include "katmai.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
+
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
+int board_early_init_f (void)
+{
+ unsigned long mfr;
+ unsigned long pfc;
+
+ /*----------------------------------------------------------------------+
+ * Interrupt controller setup for the Katmai 440SPe Evaluation board.
+ *-----------------------------------------------------------------------+
+ *-----------------------------------------------------------------------+
+ * Interrupt | Source | Pol. | Sensi.| Crit. |
+ *-----------+-----------------------------------+-------+-------+-------+
+ * IRQ 00 | UART0 | High | Level | Non |
+ * IRQ 01 | UART1 | High | Level | Non |
+ * IRQ 02 | IIC0 | High | Level | Non |
+ * IRQ 03 | IIC1 | High | Level | Non |
+ * IRQ 04 | PCI0X0 MSG IN | High | Level | Non |
+ * IRQ 05 | PCI0X0 CMD Write | High | Level | Non |
+ * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non |
+ * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non |
+ * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non |
+ * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non |
+ * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non |
+ * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit |
+ * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non |
+ * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non |
+ * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non |
+ * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non |
+ * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non |
+ * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit |
+ * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non |
+ * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non |
+ * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non |
+ * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non |
+ * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non |
+ * IRQ 23 | I2O Inbound Doorbell | High | Level | Non |
+ * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non |
+ * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non |
+ * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non |
+ * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non |
+ * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non |
+ * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non |
+ * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non |
+ * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. |
+ *------------------------------------------------------------------------
+ * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non |
+ * IRQ 33 | MAL Serr | High | Level | Non |
+ * IRQ 34 | MAL Txde | High | Level | Non |
+ * IRQ 35 | MAL Rxde | High | Level | Non |
+ * IRQ 36 | DMC CE or DMC UE | High | Level | Non |
+ * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non |
+ * IRQ 38 | MAL TX EOB | High | Level | Non |
+ * IRQ 39 | MAL RX EOB | High | Level | Non |
+ * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non |
+ * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non |
+ * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non |
+ * IRQ 43 | L2 Cache | Risin | Edge | Non |
+ * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non |
+ * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non |
+ * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non |
+ * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
+ * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
+ * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non |
+ * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non |
+ * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non |
+ * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
+ * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non |
+ * IRQ 54 | DMA Error | High | Level | Non |
+ * IRQ 55 | DMA I2O Error | High | Level | Non |
+ * IRQ 56 | Serial ROM | High | Level | Non |
+ * IRQ 57 | PCIX0 Error | High | Edge | Non |
+ * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non |
+ * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non |
+ * IRQ 60 | EMAC0 Interrupt | High | Level | Non |
+ * IRQ 61 | EMAC0 Wake-up | High | Level | Non |
+ * IRQ 62 | Reserved | High | Level | Non |
+ * IRQ 63 | XOR | High | Level | Non |
+ *-----------------------------------------------------------------------
+ * IRQ 64 | PE0 AL | High | Level | Non |
+ * IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
+ * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 68 | PE0 TCR | High | Level | Non |
+ * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 70 | PE0 DCR Error | High | Level | Non |
+ * IRQ 71 | Reserved | N/A | N/A | Non |
+ * IRQ 72 | PE1 AL | High | Level | Non |
+ * IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
+ * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 76 | PE1 TCR | High | Level | Non |
+ * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 78 | PE1 DCR Error | High | Level | Non |
+ * IRQ 79 | Reserved | N/A | N/A | Non |
+ * IRQ 80 | PE2 AL | High | Level | Non |
+ * IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
+ * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
+ * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
+ * IRQ 84 | PE2 TCR | High | Level | Non |
+ * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
+ * IRQ 86 | PE2 DCR Error | High | Level | Non |
+ * IRQ 87 | Reserved | N/A | N/A | Non |
+ * IRQ 88 | External IRQ(5) | Progr | Progr | Non |
+ * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
+ * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
+ * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
+ * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
+ * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
+ * IRQ 94 | Reserved | N/A | N/A | Non |
+ * IRQ 95 | Reserved | N/A | N/A | Non |
+ *-----------------------------------------------------------------------
+ * IRQ 96 | PE0 INTA | High | Level | Non |
+ * IRQ 97 | PE0 INTB | High | Level | Non |
+ * IRQ 98 | PE0 INTC | High | Level | Non |
+ * IRQ 99 | PE0 INTD | High | Level | Non |
+ * IRQ 100 | PE1 INTA | High | Level | Non |
+ * IRQ 101 | PE1 INTB | High | Level | Non |
+ * IRQ 102 | PE1 INTC | High | Level | Non |
+ * IRQ 103 | PE1 INTD | High | Level | Non |
+ * IRQ 104 | PE2 INTA | High | Level | Non |
+ * IRQ 105 | PE2 INTB | High | Level | Non |
+ * IRQ 106 | PE2 INTC | High | Level | Non |
+ * IRQ 107 | PE2 INTD | Risin | Edge | Non |
+ * IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non |
+ * IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non |
+ * IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non |
+ * IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non |
+ * IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non |
+ * IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non |
+ * IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non |
+ * IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non |
+ * IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non |
+ * IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non |
+ * IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non |
+ * IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non |
+ * IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non |
+ * IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non |
+ * IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non |
+ * IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non |
+ * IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non |
+ * IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non |
+ * IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non |
+ * IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non |
+ *-----------+-----------------------------------+-------+-------+-------+ */
+ /*-------------------------------------------------------------------------+
+ * Put UICs in PowerPC440SPemode.
+ * Initialise UIC registers. Clear all interrupts. Disable all interrupts.
+ * Set critical interrupt values. Set interrupt polarities. Set interrupt
+ * trigger levels. Make bit 0 High priority. Clear all interrupts again.
+ *------------------------------------------------------------------------*/
+ mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic3er, 0x00000000); /* disable all interrupts */
+ mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */
+ mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */
+ mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/
+
+
+ mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic2er, 0x00000000); /* disable all interrupts*/
+ mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/
+ mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */
+ mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic2sr, 0x00000000); /* clear all interrupts */
+ mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */
+
+ mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/
+ mtdcr (uic1er, 0x00000000); /* disable all interrupts*/
+ mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */
+ mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/
+ mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/
+
+ mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */
+ mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */
+ mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/
+ mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/
+ mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */
+ mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
+ mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/
+
+/* SDR0_MFR should be part of Ethernet init */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ECS_MASK;
+/* mtsdr(sdr_mfr, mfr); */
+
+ /*
+ * Setup GPIO signalling per defines in katmai.h
+ */
+ pfc = PFC0_KATMAI;
+ mtsdr(SDR0_PFC0, pfc);
+
+ out32(GPIO0_OR_ADDR, GPIO_OR_KATMAI);
+ out32(GPIO0_ODR_ADDR, GPIO_ODR_KATMAI);
+ out32(GPIO0_TCR_ADDR, GPIO_TCR_KATMAI);
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char *s = getenv("serial#");
+
+ printf("Board: Katmai - AMCC 440SPe Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return 0;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*-------------------------------------------------------------------+
+ * The katmai board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*-------------------------------------------------------------------+
+ * Disable everything
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*-------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+ * strapping options to not support sizes such as 128/256 MB.
+ *-------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+ out32r( PCIX0_BAR0, 0 );
+
+ /*-------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *-------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+#if defined(CONFIG_PCI)
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The katmai board is always configured as host. */
+ return 1;
+}
+
+static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
+
+void pcie_setup_hoses(void)
+{
+ struct pci_controller *hose;
+ int i, bus;
+
+ /*
+ * assume we're called after the PCIX hose is initialized, which takes
+ * bus ID 0 and therefore start numbering PCIe's from 1.
+ */
+ bus = 1;
+ for (i = 0; i <= 2; i++) {
+#ifdef PCIE_ENDPOINT
+ if (ppc440spe_init_pcie_endport(i)) {
+#else
+ if (ppc440spe_init_pcie_rootport(i)) {
+#endif
+ printf("PCIE%d: initialization failed\n", i);
+ continue;
+ }
+
+ hose = &pcie_hose[i];
+ hose->first_busno = bus;
+ hose->last_busno = bus;
+ bus++;
+
+ /* setup mem resource */
+ pci_set_region(hose->regions + 0,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
+ CFG_PCIE_MEMSIZE,
+ PCI_REGION_MEM
+ );
+ hose->region_count = 1;
+ pci_register_hose(hose);
+
+#ifdef PCIE_ENDPOINT
+ ppc440spe_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+#else
+ ppc440spe_setup_pcie_rootpoint(hose, i);
+ /*
+ * Config access can only go down stream
+ */
+ hose->last_busno = pci_hose_scan(hose);
+#endif
+ }
+}
+#endif /* defined(CONFIG_PCI) */
+
+int misc_init_f (void)
+{
+ uint reg;
+#if defined(CONFIG_STRESS)
+ uint i ;
+ uint disp;
+#endif
+
+ /* minimal init for PCIe */
+#if 0 /* test-only: test endpoint at some time, for now rootpoint only */
+ /* pci express 0 Endpoint Mode */
+ mfsdr(SDR0_PE0DLPSET, reg);
+ reg &= (~0x00400000);
+ mtsdr(SDR0_PE0DLPSET, reg);
+#else
+ /* pci express 0 Rootpoint Mode */
+ mfsdr(SDR0_PE0DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE0DLPSET, reg);
+#endif
+ /* pci express 1 Rootpoint Mode */
+ mfsdr(SDR0_PE1DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE1DLPSET, reg);
+ /* pci express 2 Rootpoint Mode */
+ mfsdr(SDR0_PE2DLPSET, reg);
+ reg |= 0x00400000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+#if defined(CONFIG_STRESS)
+ /*
+ * All this setting done by linux only needed by stress an charac. test
+ * procedure
+ * PCIe 1 Rootpoint PCIe2 Endpoint
+ * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level
+ */
+ for (i=0,disp=0; i<8; i++,disp+=3) {
+ mfsdr(SDR0_PE0HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE0HSSSET1L0+disp, reg);
+ }
+
+ /*PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */
+ for (i=0,disp=0; i<4; i++,disp+=3) {
+ mfsdr(SDR0_PE1HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE1HSSSET1L0+disp, reg);
+ }
+
+ /*PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */
+ for (i=0,disp=0; i<4; i++,disp+=3) {
+ mfsdr(SDR0_PE2HSSSET1L0+disp, reg);
+ reg |= 0x33000000;
+ mtsdr(SDR0_PE2HSSSET1L0+disp, reg);
+ }
+
+ reg = 0x21242222;
+ mtsdr(SDR0_PE2UTLSET1, reg);
+ reg = 0x11000000;
+ mtsdr(SDR0_PE2UTLSET2, reg);
+ /* pci express 1 Endpoint Mode */
+ reg = 0x00004000;
+ mtsdr(SDR0_PE2DLPSET, reg);
+
+ mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+ return (ctrlc());
+}
+#endif
diff --git a/board/amcc/katmai/katmai.h b/board/amcc/katmai/katmai.h
new file mode 100644
index 00000000000..9d5b793f131
--- /dev/null
+++ b/board/amcc/katmai/katmai.h
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KATMAI_H_
+#define __KATMAI_H_
+
+/*----------------------------------------------------------------------------
+ * XX
+ * XXXX XX XXX XXX XXXX
+ * XX XX XX XX XX XX
+ * XX XXX XX XX XX XX XX
+ * XX XX XXXXX XX XX XX
+ * XXXX XX XXXX XXXX
+ * XXXX
+ *
+ * The 440SPe provices 32 bits of GPIO. By default all GPIO pins
+ * are disabled, and must be explicitly enabled by setting a
+ * bit in the SDR0_PFC0 indirect DCR. Each GPIO maps 1-to-1 with the
+ * corresponding bit in the SDR0_PFC0 register (note that bit numbers
+ * reflect the PowerPC convention where bit 0 is the most-significant
+ * bit).
+ *
+ * Katmai specific:
+ * RS232_RX_EN# is held HIGH during reset by hardware, keeping the
+ * RS232_CTS, DSR & DCD signals coming from the MAX3411 (U26) in
+ * Hi-Z condition. This prevents contention between the MAX3411 (U26)
+ * and 74CBTLV3125PG (U2) during reset.
+ *
+ * RS232_RX_EN# is connected as GPIO pin 30. Once the processor
+ * is released from reset, this pin must be configured as an output and
+ * then driven high to enable the receive signals from the UART transciever.
+ *----------------------------------------------------------------------------*/
+#define GPIO_ENABLE(gpio) (0x80000000 >> (gpio))
+
+#define PFC0_KATMAI GPIO_ENABLE(30)
+#define GPIO_OR_KATMAI GPIO_ENABLE(30) /* Drive all outputs low except GPIO 30 */
+#define GPIO_TCR_KATMAI GPIO_ENABLE(30)
+#define GPIO_ODR_KATMAI 0 /* Disable open drain for all outputs */
+
+#define GPIO0_OR_ADDR (CFG_PERIPHERAL_BASE + 0x700)
+#define GPIO0_TCR_ADDR (CFG_PERIPHERAL_BASE + 0x704)
+#define GPIO0_ODR_ADDR (CFG_PERIPHERAL_BASE + 0x718)
+#define GPIO0_IR_ADDR (CFG_PERIPHERAL_BASE + 0x71C)
+
+#endif /* __KATMAI_H_ */
diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds
new file mode 100644
index 00000000000..bf8fc5d3dab
--- /dev/null
+++ b/board/amcc/katmai/u-boot.lds
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/katmai/init.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index a7114eb074e..a0fac7fe5ab 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -23,7 +23,7 @@
#include <common.h>
#include <asm/processor.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
#include <command.h>
#include <rtc.h>
#include <post.h>
diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 5cd342332f5..001fd68da42 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -33,6 +33,7 @@
#include <asm/byteorder.h>
#include <linux/mtd/nand_legacy.h>
#include <fat.h>
+#include <part.h>
#include "auto_update.h"
@@ -71,8 +72,6 @@ extern int transfer_pic(unsigned char, unsigned char *, int, int);
extern int flash_sect_erase(ulong, ulong);
extern int flash_sect_protect (int, ulong, ulong);
extern int flash_write (char *, ulong, ulong);
-/* change char* to void* to shutup the compiler */
-extern block_dev_desc_t *get_dev (char*, int);
#if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY)
/* references to names in cmd_nand.c */
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 36bb7ce2c74..17e35689410 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -366,12 +366,12 @@ int misc_init_r ()
dcache_lock ();
#endif
if (flash_info[3].size < CFG_FLASH_INCREMENT) {
- unsigned int flash_offset;
+ unsigned int flash_offset;
unsigned int l;
flash_offset = CFG_FLASH_INCREMENT - flash_info[3].size;
for (l = 0; l < CFG_MAX_FLASH_SECT; l++) {
- if (flash_info[3].start[l] != 0) {
+ if (flash_info[3].start[l] != 0) {
flash_info[3].start[l] += flash_offset;
}
}
@@ -503,7 +503,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest)
{
asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
"stfd 0, 0(4)" /* *dest = fpr0 */
- : : : "fr0"); /* Clobbers fr0 */
+ : : : "fr0"); /* Clobbers fr0 */
return;
}
@@ -581,9 +581,9 @@ int mem_test_data (void)
move64 (&(pattern[i]), pmem);
move64 (pmem, &temp64);
- /* hi = (temp64>>32) & 0xffffffff; */
- /* lo = temp64 & 0xffffffff; */
- /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
hi = (pattern[i] >> 32) & 0xffffffff;
lo = pattern[i] & 0xffffffff;
@@ -856,11 +856,11 @@ int testdram (void)
}
#endif /* CFG_DRAM_TEST */
-/* ronen - the below functions are used by the bootm function */
+/* ronen - the below functions are used by the bootm function */
/* - we map the base register to fbe00000 (same mapping as in the LSP) */
/* - we turn off the RX gig dmas - to prevent the dma from overunning */
-/* the kernel data areas. */
-/* - we diable and invalidate the icache and dcache. */
+/* the kernel data areas. */
+/* - we diable and invalidate the icache and dcache. */
void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc)
{
u32 temp;
@@ -911,13 +911,11 @@ int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
GT_REG_READ(0x3d4, &reset_sample_high);
printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high);
- return(0);
+ return(0);
}
-
U_BOOT_CMD(
show_cfg, 1, 1, do_show_cfg,
"show_cfg- Show Marvell strapping register\n",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
);
-
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index a019ce42150..69432138d31 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -25,7 +25,7 @@
#include "du405.h"
#include <asm/processor.h>
#include <ppc4xx.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
#include <command.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c
index de04c663854..d212c63328b 100644
--- a/board/lpc2292sodimm/lpc2292sodimm.c
+++ b/board/lpc2292sodimm/lpc2292sodimm.c
@@ -46,7 +46,7 @@ int board_init (void)
gd->bd->bi_arch_number = 83;
/* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c
index f1bb7212848..90d03ec47a8 100644
--- a/board/mcc200/auto_update.c
+++ b/board/mcc200/auto_update.c
@@ -23,6 +23,7 @@
#include <image.h>
#include <asm/byteorder.h>
#include <usb.h>
+#include <part.h>
#ifdef CFG_HUSH_PARSER
#include <hush.h>
@@ -47,25 +48,6 @@
#error "must define CFG_CMD_FAT"
#endif
-/*
- * Check whether a USB memory stick is plugged in.
- * If one is found:
- * 1) if prepare.img ist found load it into memory. If it is
- * valid then run it.
- * 2) if preinst.img is found load it into memory. If it is
- * valid then run it. Update the EEPROM.
- * 3) if firmw_01.img is found load it into memory. If it is valid,
- * burn it into FLASH and update the EEPROM.
- * 4) if kernl_01.img is found load it into memory. If it is valid,
- * burn it into FLASH and update the EEPROM.
- * 5) if app.img is found load it into memory. If it is valid,
- * burn it into FLASH and update the EEPROM.
- * 6) if disk.img is found load it into memory. If it is valid,
- * burn it into FLASH and update the EEPROM.
- * 7) if postinst.img is found load it into memory. If it is
- * valid then run it. Update the EEPROM.
- */
-
#undef AU_DEBUG
#undef debug
@@ -78,6 +60,7 @@
/* possible names of files on the USB stick. */
#define AU_FIRMWARE "u-boot.img"
#define AU_KERNEL "kernel.img"
+#define AU_ROOTFS "rootfs.img"
struct flash_layout {
long start;
@@ -89,33 +72,47 @@ struct flash_layout {
#define AU_FL_FIRMWARE_ND 0xfC03FFFF
#define AU_FL_KERNEL_ST 0xfC0C0000
#define AU_FL_KERNEL_ND 0xfC1BFFFF
+#define AU_FL_ROOTFS_ST 0xFC1C0000
+#define AU_FL_ROOTFS_ND 0xFCFBFFFF
static int au_usb_stor_curr_dev; /* current device */
/* index of each file in the following arrays */
#define IDX_FIRMWARE 0
#define IDX_KERNEL 1
+#define IDX_ROOTFS 2
/* max. number of files which could interest us */
-#define AU_MAXFILES 2
+#define AU_MAXFILES 3
/* pointers to file names */
-char *aufile[AU_MAXFILES];
+char *aufile[AU_MAXFILES] = {
+ AU_FIRMWARE,
+ AU_KERNEL,
+ AU_ROOTFS
+};
/* sizes of flash areas for each file */
-long ausize[AU_MAXFILES];
+long ausize[AU_MAXFILES] = {
+ (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST,
+ (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST,
+ (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST,
+};
/* array of flash areas start and end addresses */
-struct flash_layout aufl_layout[AU_MAXFILES] = { \
- {AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, \
- {AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, \
+struct flash_layout aufl_layout[AU_MAXFILES] = {
+ { AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND, },
+ { AU_FL_KERNEL_ST, AU_FL_KERNEL_ND, },
+ { AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND, },
};
+ulong totsize;
+
/* where to load files into memory */
#define LOAD_ADDR ((unsigned char *)0x00200000)
-/* the app is the largest image */
-#define MAX_LOADSZ ausize[IDX_KERNEL]
+/* the root file system is the largest image */
+#define MAX_LOADSZ ausize[IDX_ROOTFS]
/*i2c address of the keypad status*/
#define I2C_PSOC_KEYPAD_ADDR 0x53
@@ -134,9 +131,12 @@ extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int);
extern int flash_sect_erase(ulong, ulong);
extern int flash_sect_protect (int, ulong, ulong);
extern int flash_write (char *, ulong, ulong);
-/* change char* to void* to shutup the compiler */
-extern block_dev_desc_t *get_dev (char*, int);
extern int u_boot_hush_start(void);
+#ifdef CONFIG_PROGRESSBAR
+extern void show_progress(int, int);
+extern void lcd_puts (char *);
+extern void lcd_enable(void);
+#endif
int au_check_cksum_valid(int idx, long nbytes)
{
@@ -162,8 +162,7 @@ int au_check_cksum_valid(int idx, long nbytes)
int au_check_header_valid(int idx, long nbytes)
{
image_header_t *hdr;
- unsigned long checksum;
- unsigned char buf[4];
+ unsigned long checksum, fsize;
hdr = (image_header_t *)LOAD_ADDR;
/* check the easy ones first */
@@ -176,10 +175,12 @@ int au_check_header_valid(int idx, long nbytes)
#endif
if (nbytes < sizeof(*hdr)) {
printf ("Image %s bad header SIZE\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC) {
printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
/* check the hdr CRC */
@@ -188,30 +189,46 @@ int au_check_header_valid(int idx, long nbytes)
if (crc32 (0, (uchar *)hdr, sizeof(*hdr)) != checksum) {
printf ("Image %s bad header checksum\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
hdr->ih_hcrc = htonl(checksum);
/* check the type - could do this all in one gigantic if() */
if ((idx == IDX_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) {
printf ("Image %s wrong type\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
if ((idx == IDX_KERNEL) && (hdr->ih_type != IH_TYPE_KERNEL)) {
printf ("Image %s wrong type\n", aufile[idx]);
+ ausize[idx] = 0;
+ return -1;
+ }
+ if ((idx == IDX_ROOTFS) &&
+ ( (hdr->ih_type != IH_TYPE_RAMDISK) && (hdr->ih_type != IH_TYPE_FILESYSTEM) )
+ ) {
+ printf ("Image %s wrong type\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
/* recycle checksum */
checksum = ntohl(hdr->ih_size);
- /* for kernel and app the image header must also fit into flash */
- if (idx != IDX_FIRMWARE)
+
+ fsize = checksum + sizeof(*hdr);
+ /* for kernel and ramdisk the image header must also fit into flash */
+ if (idx == IDX_KERNEL || hdr->ih_type == IH_TYPE_RAMDISK)
checksum += sizeof(*hdr);
+
/* check the size does not exceed space in flash. HUSH scripts */
- /* all have ausize[] set to 0 */
if ((ausize[idx] != 0) && (ausize[idx] < checksum)) {
printf ("Image %s is bigger than FLASH\n", aufile[idx]);
+ ausize[idx] = 0;
return -1;
}
- return 0;
+ /* Update with the real filesize */
+ ausize[idx] = fsize;
+
+ return checksum; /* return size to be written to flash */
}
int au_do_update(int idx, long sz)
@@ -256,8 +273,12 @@ int au_do_update(int idx, long sz)
debug ("flash_sect_erase(%lx, %lx);\n", start, end);
flash_sect_erase(start, end);
wait_ms(100);
+#ifdef CONFIG_PROGRESSBAR
+ show_progress(end - start, totsize);
+#endif
+
/* strip the header - except for the kernel and ramdisk */
- if (hdr->ih_type == IH_TYPE_KERNEL) {
+ if (hdr->ih_type == IH_TYPE_KERNEL || hdr->ih_type == IH_TYPE_RAMDISK) {
addr = (char *)hdr;
off = sizeof(*hdr);
nbytes = sizeof(*hdr) + ntohl(hdr->ih_size);
@@ -280,9 +301,13 @@ int au_do_update(int idx, long sz)
return -1;
}
- /* check the dcrc of the copy */
+#ifdef CONFIG_PROGRESSBAR
+ show_progress(nbytes, totsize);
+#endif
+
+ /* check the data CRC of the copy */
if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) {
- printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]);
+ printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]);
return -1;
}
@@ -302,10 +327,10 @@ int do_auto_update(void)
{
block_dev_desc_t *stor_dev;
long sz;
- int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc;
+ int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc;
char *env;
long start, end;
- char keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
+ uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0};
/*
* Read keypad status
@@ -317,14 +342,11 @@ int do_auto_update(void)
/*
* Check keypad
*/
- if ( !(keypad_status1[0] & KEYPAD_MASK_HI) ||
- (keypad_status1[0] != keypad_status2[0])) {
- return 0;
- }
if ( !(keypad_status1[1] & KEYPAD_MASK_LO) ||
(keypad_status1[1] != keypad_status2[1])) {
return 0;
}
+
au_usb_stor_curr_dev = -1;
/* start USB */
if (usb_stop() < 0) {
@@ -359,14 +381,6 @@ int do_auto_update(void)
debug ("file_fat_detectfs failed\n");
}
- /* initialize the array of file names */
- memset(aufile, 0, sizeof(aufile));
- aufile[IDX_FIRMWARE] = AU_FIRMWARE;
- aufile[IDX_KERNEL] = AU_KERNEL;
- /* initialize the array of flash sizes */
- memset(ausize, 0, sizeof(ausize));
- ausize[IDX_FIRMWARE] = (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST;
- ausize[IDX_KERNEL] = (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST;
/*
* now check whether start and end are defined using environment
* variables.
@@ -381,8 +395,8 @@ int do_auto_update(void)
end = simple_strtoul(env, NULL, 16);
if (start >= 0 && end && end > start) {
ausize[IDX_FIRMWARE] = (end + 1) - start;
- aufl_layout[0].start = start;
- aufl_layout[0].end = end;
+ aufl_layout[IDX_FIRMWARE].start = start;
+ aufl_layout[IDX_FIRMWARE].end = end;
}
start = -1;
end = 0;
@@ -394,32 +408,73 @@ int do_auto_update(void)
end = simple_strtoul(env, NULL, 16);
if (start >= 0 && end && end > start) {
ausize[IDX_KERNEL] = (end + 1) - start;
- aufl_layout[1].start = start;
- aufl_layout[1].end = end;
+ aufl_layout[IDX_KERNEL].start = start;
+ aufl_layout[IDX_KERNEL].end = end;
}
+ start = -1;
+ end = 0;
+ env = getenv("rootfs_st");
+ if (env != NULL)
+ start = simple_strtoul(env, NULL, 16);
+ env = getenv("rootfs_nd");
+ if (env != NULL)
+ end = simple_strtoul(env, NULL, 16);
+ if (start >= 0 && end && end > start) {
+ ausize[IDX_ROOTFS] = (end + 1) - start;
+ aufl_layout[IDX_ROOTFS].start = start;
+ aufl_layout[IDX_ROOTFS].end = end;
+ }
+
/* make certain that HUSH is runnable */
u_boot_hush_start();
/* make sure that we see CTRL-C and save the old state */
old_ctrlc = disable_ctrlc(0);
bitmap_first = 0;
- /* just loop thru all the possible files */
+
+ /* validate the images first */
for (i = 0; i < AU_MAXFILES; i++) {
+ ulong imsize;
/* just read the header */
sz = file_fat_read(aufile[i], LOAD_ADDR, sizeof(image_header_t));
debug ("read %s sz %ld hdr %d\n",
aufile[i], sz, sizeof(image_header_t));
if (sz <= 0 || sz < sizeof(image_header_t)) {
debug ("%s not found\n", aufile[i]);
+ ausize[i] = 0;
continue;
}
- if (au_check_header_valid(i, sz) < 0) {
+ /* au_check_header_valid() updates ausize[] */
+ if ((imsize = au_check_header_valid(i, sz)) < 0) {
debug ("%s header not valid\n", aufile[i]);
continue;
}
- sz = file_fat_read(aufile[i], LOAD_ADDR, MAX_LOADSZ);
+ /* totsize accounts for image size and flash erase size */
+ totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start));
+ }
+
+#ifdef CONFIG_PROGRESSBAR
+ if (totsize) {
+ lcd_puts(" Update in progress\n");
+ lcd_enable();
+ }
+#endif
+
+ /* just loop thru all the possible files */
+ for (i = 0; i < AU_MAXFILES && totsize; i++) {
+ if (!ausize[i]) {
+ continue;
+ }
+ sz = file_fat_read(aufile[i], LOAD_ADDR, ausize[i]);
+
debug ("read %s sz %ld hdr %d\n",
aufile[i], sz, sizeof(image_header_t));
+
+ if (sz != ausize[i]) {
+ printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz);
+ continue;
+ }
+
if (sz <= 0 || sz <= sizeof(image_header_t)) {
debug ("%s not found\n", aufile[i]);
continue;
@@ -443,8 +498,8 @@ int do_auto_update(void)
}
cnt++;
#ifdef AU_TEST_ONLY
- } while (res < 0 && cnt < 3);
- if (cnt < 3)
+ } while (res < 0 && cnt < (AU_MAXFILES + 1));
+ if (cnt < (AU_MAXFILES + 1))
#else
} while (res < 0);
#endif
@@ -452,6 +507,16 @@ int do_auto_update(void)
usb_stop();
/* restore the old state */
disable_ctrlc(old_ctrlc);
+#ifdef CONFIG_PROGRESSBAR
+ if (totsize) {
+ if (!res) {
+ lcd_puts("\n Update completed\n");
+ } else {
+ lcd_puts("\n Update error\n");
+ }
+ lcd_enable();
+ }
+#endif
return 0;
}
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
index b2625160a5e..98b86d1834f 100644
--- a/board/mcc200/lcd.c
+++ b/board/mcc200/lcd.c
@@ -24,13 +24,13 @@
#ifdef CONFIG_LCD
-#define SWAPPED_LCD
+#undef SWAPPED_LCD /* For the previous h/w version */
/*
* The name of the device used for communication
* with the PSoC.
*/
#define PSOC_PSC MPC5XXX_PSC2
-#define PSOC_BAUD 500000UL
+#define PSOC_BAUD 230400UL
#define RTS_ASSERT 1
#define RTS_NEGATE 0
@@ -181,10 +181,35 @@ void lcd_enable (void)
udelay (PSOC_WAIT_TIME);
}
if (!retries) {
- printf ("%s Error: PSoC doesn't respond on "
+ printf ("%s Warning: PSoC doesn't respond on "
"RTS NEGATE\n", __FUNCTION__);
}
return;
}
+#ifdef CONFIG_PROGRESSBAR
+
+#define FONT_WIDTH 8 /* the same as VIDEO_FONT_WIDTH in video_font.h */
+void show_progress (int size, int tot)
+{
+ int cnt;
+ int i;
+ static int rc = 0;
+
+ rc += size;
+
+ cnt = ((LCD_WIDTH/FONT_WIDTH) * rc) / tot;
+
+ rc -= (cnt * tot) / (LCD_WIDTH/FONT_WIDTH);
+
+ for (i = 0; i < cnt; i++) {
+ lcd_putc(0xdc);
+ }
+
+ if (cnt) {
+ lcd_enable(); /* MCC200-specific - send the framebuffer to PSoC */
+ }
+}
+
+#endif
#endif /* CONFIG_LCD */
diff --git a/board/motionpro/Makefile b/board/motionpro/Makefile
new file mode 100644
index 00000000000..698ead195cb
--- /dev/null
+++ b/board/motionpro/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/motionpro/config.mk b/board/motionpro/config.mk
new file mode 100644
index 00000000000..e7934d29c15
--- /dev/null
+++ b/board/motionpro/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2006-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Promess Motion-PRO
+#
+
+TEXT_BASE = 0xfff00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
new file mode 100644
index 00000000000..d60d23332b1
--- /dev/null
+++ b/board/motionpro/motionpro.c
@@ -0,0 +1,172 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * modified for Promess PRO - by Andy Joseph, andy@promessdev.com
+ * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
+ * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
+ * Also changed the refresh for 100Mhz operation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+
+/* Kollmorgen DPR initialization data */
+struct init_elem {
+ unsigned long addr;
+ unsigned len;
+ char *data;
+ } init_seq[] = {
+ {0x500003F2, 2, "\x86\x00"}, /* HW parameter */
+ {0x500003F0, 2, "\x00\x00"},
+ {0x500003EC, 4, "\x00\x80\xc1\x52"}, /* Magic word */
+ };
+
+/*
+ * Initialize Kollmorgen DPR
+ */
+static void kollmorgen_init(void)
+{
+ unsigned i, j;
+ vu_char *p;
+
+ for (i = 0; i < sizeof(init_seq) / sizeof(struct init_elem); ++i) {
+ p = (vu_char *)init_seq[i].addr;
+ for (j = 0; j < init_seq[i].len; ++j)
+ *(p + j) = *(init_seq[i].data + j);
+ }
+
+ printf("DPR: Kollmorgen DPR initialized\n");
+}
+
+
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ /* Now, when we are in RAM, disable Boot Chipselect and enable CS0 */
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25);
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16);
+
+ /* Initialize Kollmorgen DPR */
+ kollmorgen_init();
+
+ return 0;
+}
+
+
+#ifndef CFG_RAMBOOT
+/*
+ * Helper function to initialize SDRAM controller.
+ */
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
+ hi_addr_bit;
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
+ hi_addr_bit;
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* auto refresh, second time */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
+ hi_addr_bit;
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+}
+#endif /* !CFG_RAMBOOT */
+
+
+/*
+ * Initalize SDRAM - configure SDRAM controller, detect memory size.
+ */
+long int initdram (int board_type)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* configure SDRAM start/end for detection */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+
+ sdram_start(0);
+ test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
+ __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ /* let SDRAM CS1 start right after CS0 and disable it */
+ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;
+
+#else /* !CFG_RAMBOOT */
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13)
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ else
+ dramsize = 0;
+#endif /* CFG_RAMBOOT */
+
+ /* return total ram size */
+ return dramsize;
+}
+
+
+int checkboard (void)
+{
+ puts("Board: Promess Motion-PRO board\n");
+ return 0;
+}
diff --git a/board/motionpro/u-boot.lds b/board/motionpro/u-boot.lds
new file mode 100644
index 00000000000..8fa9c0f7ed5
--- /dev/null
+++ b/board/motionpro/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c
index ff1190ab212..1d28513d87e 100644
--- a/board/mpl/common/memtst.c
+++ b/board/mpl/common/memtst.c
@@ -48,7 +48,7 @@ int testdram (void)
#include <common.h>
#include <asm/processor.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 34f328999d1..4b1c1c06694 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -65,7 +65,7 @@
#include <common.h>
#include "mip405.h"
#include <asm/processor.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
#include <miiphy.h>
#include "../common/common_util.h"
#include <i2c.h>
@@ -73,9 +73,6 @@
DECLARE_GLOBAL_DATA_PTR;
-extern block_dev_desc_t * scsi_get_dev(int dev);
-extern block_dev_desc_t * ide_get_dev(int dev);
-
#undef SDRAM_DEBUG
#define ENABLE_ECC /* for ecc boards */
#define FALSE 0
diff --git a/board/prodrive/p3mx/p3mx.h b/board/prodrive/p3mx/p3mx.h
index 91071e92092..1caae6b9c15 100644
--- a/board/prodrive/p3mx/p3mx.h
+++ b/board/prodrive/p3mx/p3mx.h
@@ -31,4 +31,3 @@
#define LED_ORANGE 4
#endif /* __P3MX_H__ */
-
diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c
index 859dd7afe56..1e3dffb1ee1 100644
--- a/board/sandburst/common/ppc440gx_i2c.c
+++ b/board/sandburst/common/ppc440gx_i2c.c
@@ -27,13 +27,8 @@
*/
#include <common.h>
#include <ppc4xx.h>
-#if defined(CONFIG_440)
-# include <440_i2c.h>
-#else
-# include <405gp_i2c.h>
-#endif
+#include <4xx_i2c.h>
#include <i2c.h>
-#include <440_i2c.h>
#include <command.h>
#include "ppc440gx_i2c.h"
diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h
index cd4fc86661f..10000f5ba9b 100644
--- a/board/sandburst/common/ppc440gx_i2c.h
+++ b/board/sandburst/common/ppc440gx_i2c.h
@@ -27,11 +27,7 @@
*/
#include <common.h>
#include <ppc4xx.h>
-#if defined(CONFIG_440)
-# include <440_i2c.h>
-#else
-# include <405gp_i2c.h>
-#endif
+#include <4xx_i2c.h>
#include <i2c.h>
#ifdef CONFIG_HARD_I2C
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index d2c8d44a79f..f4074aecb11 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -203,7 +203,6 @@ extern int flash_write (char *, ulong, ulong);
/* change char* to void* to shutup the compiler */
extern int i2c_write_multiple (uchar, uint, int, void *, int);
extern int i2c_read_multiple (uchar, uint, int, void *, int);
-extern block_dev_desc_t *get_dev (char*, int);
extern int u_boot_hush_start(void);
int
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
index 02c22fbef1f..05ad23524f1 100644
--- a/board/xilinx/ml300/Makefile
+++ b/board/xilinx/ml300/Makefile
@@ -28,7 +28,7 @@ $(shell mkdir -p $(obj)../xilinx_enet)
$(shell mkdir -p $(obj)../xilinx_iic)
endif
-INCS := -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+INCS := -I../common -I../xilinx_enet -I../xilinx_iic
CFLAGS += $(INCS)
HOST_CFLAGS += $(INCS)
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index dad562f1c77..60f0bc24e78 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -38,9 +38,9 @@
*
*/
+#include <config.h>
#include <common.h>
#include <asm/processor.h>
-#include "xparameters.h"
#ifdef CFG_ENV_IS_IN_EEPROM
extern void convert_env(void);
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index c204b88e415..9b03f89eff4 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -40,8 +40,7 @@
#include <asm/processor.h>
#include <common.h>
#include <command.h>
-#include <configs/ml300.h>
-#include "xparameters.h"
+#include <config.h>
DECLARE_GLOBAL_DATA_PTR;
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
index b30e8976692..f159cb6e392 100644
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ b/board/xilinx/xilinx_enet/emac_adapter.c
@@ -37,9 +37,9 @@
*
******************************************************************************/
+#include <config.h>
#include <common.h>
#include <net.h>
-#include "xparameters.h"
#include "xemac.h"
#if defined(XPAR_EMAC_0_DEVICE_ID)
diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h
index ed704bf29b3..584cb7ac51e 100644
--- a/board/xilinx/xilinx_enet/xemac.h
+++ b/board/xilinx/xilinx_enet/xemac.h
@@ -257,9 +257,9 @@
/***************************** Include Files *********************************/
+#include <config.h>
#include "xbasic_types.h"
#include "xstatus.h"
-#include "xparameters.h"
#include "xpacket_fifo_v1_00_b.h" /* Uses v1.00b of Packet Fifo */
#include "xdma_channel.h"
diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c
index 9340f911f86..d9851574f73 100644
--- a/board/xilinx/xilinx_enet/xemac_g.c
+++ b/board/xilinx/xilinx_enet/xemac_g.c
@@ -43,7 +43,7 @@
*
*******************************************************************/
-#include "xparameters.h"
+#include <config.h>
#include "xemac.h"
/*
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 163fe1511db..37dce039164 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -37,10 +37,10 @@
*
******************************************************************************/
+#include <config.h>
#include <common.h>
#include <environment.h>
#include <net.h>
-#include "xparameters.h"
#ifdef CFG_ENV_IS_IN_EEPROM
#include <i2c.h>
diff --git a/common/Makefile b/common/Makefile
index 0106088e242..6f81c4abcf3 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -27,8 +27,7 @@ LIB = $(obj)libcommon.a
AOBJS =
-COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
- cmd_ace.o cmd_autoscript.o \
+COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \
cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
cmd_cache.o cmd_console.o \
cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
diff --git a/common/cmd_ace.c b/common/cmd_ace.c
deleted file mode 100644
index b6d61057fde..00000000000
--- a/common/cmd_ace.c
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * Copyright (c) 2004 Picture Elements, Inc.
- * Stephen Williams (XXXXXXXXXXXXXXXX)
- *
- * This source code is free software; you can redistribute it
- * and/or modify it in source code form under the terms of the GNU
- * General Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-#ident "$Id:$"
-
-/*
- * The Xilinx SystemACE chip support is activated by defining
- * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
- * to set the base address of the device. This code currently
- * assumes that the chip is connected via a byte-wide bus.
- *
- * The CONFIG_SYSTEMACE also adds to fat support the device class
- * "ace" that allows the user to execute "fatls ace 0" and the
- * like. This works by making the systemace_get_dev function
- * available to cmd_fat.c:get_dev and filling in a block device
- * description that has all the bits needed for FAT support to
- * read sectors.
- *
- * According to Xilinx technical support, before accessing the
- * SystemACE CF you need to set the following control bits:
- * FORCECFGMODE : 1
- * CFGMODE : 0
- * CFGSTART : 0
- */
-
-# include <common.h>
-# include <command.h>
-# include <systemace.h>
-# include <part.h>
-# include <asm/io.h>
-
-#ifdef CONFIG_SYSTEMACE
-
-/*
- * The ace_readw and writew functions read/write 16bit words, but the
- * offset value is the BYTE offset as most used in the Xilinx
- * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
- * to be the base address for the chip, usually in the local
- * peripheral bus.
- */
-static unsigned ace_readw(unsigned offset)
-{
-#if (CFG_SYSTEMACE_WIDTH == 8)
- u16 temp;
-
-#if !defined(__BIG_ENDIAN)
- temp =((u16)readb(CFG_SYSTEMACE_BASE+offset) << 8);
- temp |= (u16)readb(CFG_SYSTEMACE_BASE+offset+1);
-#else
- temp = (u16)readb(CFG_SYSTEMACE_BASE+offset);
- temp |=((u16)readb(CFG_SYSTEMACE_BASE+offset+1) << 8);
-#endif
- return temp;
-#else
- return readw(CFG_SYSTEMACE_BASE+offset);
-#endif
-}
-
-static void ace_writew(unsigned val, unsigned offset)
-{
-#if (CFG_SYSTEMACE_WIDTH == 8)
-#if !defined(__BIG_ENDIAN)
- writeb((u8)(val>>8), CFG_SYSTEMACE_BASE+offset);
- writeb((u8)val, CFG_SYSTEMACE_BASE+offset+1);
-#else
- writeb((u8)val, CFG_SYSTEMACE_BASE+offset);
- writeb((u8)(val>>8), CFG_SYSTEMACE_BASE+offset+1);
-#endif
-#else
- writew(val, CFG_SYSTEMACE_BASE+offset);
-#endif
-}
-
-/* */
-
-static unsigned long systemace_read(int dev,
- unsigned long start,
- unsigned long blkcnt,
- unsigned long *buffer);
-
-static block_dev_desc_t systemace_dev = {0};
-
-static int get_cf_lock(void)
-{
- int retry = 10;
-
- /* CONTROLREG = LOCKREG */
- unsigned val=ace_readw(0x18);
- val|=0x0002;
- ace_writew((val&0xffff), 0x18);
-
- /* Wait for MPULOCK in STATUSREG[15:0] */
- while (! (ace_readw(0x04) & 0x0002)) {
-
- if (retry < 0)
- return -1;
-
- udelay(100000);
- retry -= 1;
- }
-
- return 0;
-}
-
-static void release_cf_lock(void)
-{
- unsigned val=ace_readw(0x18);
- val&=~(0x0002);
- ace_writew((val&0xffff), 0x18);
-}
-
-block_dev_desc_t * systemace_get_dev(int dev)
-{
- /* The first time through this, the systemace_dev object is
- not yet initialized. In that case, fill it in. */
- if (systemace_dev.blksz == 0) {
- systemace_dev.if_type = IF_TYPE_UNKNOWN;
- systemace_dev.dev = 0;
- systemace_dev.part_type = PART_TYPE_UNKNOWN;
- systemace_dev.type = DEV_TYPE_HARDDISK;
- systemace_dev.blksz = 512;
- systemace_dev.removable = 1;
- systemace_dev.block_read = systemace_read;
-
- init_part(&systemace_dev);
-
- }
-
- return &systemace_dev;
-}
-
-/*
- * This function is called (by dereferencing the block_read pointer in
- * the dev_desc) to read blocks of data. The return value is the
- * number of blocks read. A zero return indicates an error.
- */
-static unsigned long systemace_read(int dev,
- unsigned long start,
- unsigned long blkcnt,
- unsigned long *buffer)
-{
- int retry;
- unsigned blk_countdown;
- unsigned char*dp = (unsigned char*)buffer;
- unsigned val;
-
- if (get_cf_lock() < 0) {
- unsigned status = ace_readw(0x04);
-
- /* If CFDETECT is false, card is missing. */
- if (! (status&0x0010)) {
- printf("** CompactFlash card not present. **\n");
- return 0;
- }
-
- printf("**** ACE locked away from me (STATUSREG=%04x)\n", status);
- return 0;
- }
-
-#ifdef DEBUG_SYSTEMACE
- printf("... systemace read %lu sectors at %lu\n", blkcnt, start);
-#endif
-
- retry = 2000;
- for (;;) {
- val = ace_readw(0x04);
-
- /* If CFDETECT is false, card is missing. */
- if (! (val & 0x0010)) {
- printf("**** ACE CompactFlash not found.\n");
- release_cf_lock();
- return 0;
- }
-
- /* If RDYFORCMD, then we are ready to go. */
- if (val & 0x0100)
- break;
-
- if (retry < 0) {
- printf("**** SystemACE not ready.\n");
- release_cf_lock();
- return 0;
- }
-
- udelay(1000);
- retry -= 1;
- }
-
- /* The SystemACE can only transfer 256 sectors at a time, so
- limit the current chunk of sectors. The blk_countdown
- variable is the number of sectors left to transfer. */
-
- blk_countdown = blkcnt;
- while (blk_countdown > 0) {
- unsigned trans = blk_countdown;
-
- if (trans > 256) trans = 256;
-
-#ifdef DEBUG_SYSTEMACE
- printf("... transfer %lu sector in a chunk\n", trans);
-#endif
- /* Write LBA block address */
- ace_writew((start>> 0) & 0xffff, 0x10);
- ace_writew((start>>16) & 0x00ff, 0x12);
-
- /* NOTE: in the Write Sector count below, a count of 0
- causes a transfer of 256, so &0xff gives the right
- value for whatever transfer count we want. */
-
- /* Write sector count | ReadMemCardData. */
- ace_writew((trans&0xff) | 0x0300, 0x14);
-
- /* Reset the configruation controller */
- val = ace_readw(0x18);
- val|=0x0080;
- ace_writew(val, 0x18);
-
- retry = trans * 16;
- while (retry > 0) {
- int idx;
-
- /* Wait for buffer to become ready. */
- while (! (ace_readw(0x04) & 0x0020)) {
- udelay(100);
- }
-
- /* Read 16 words of 2bytes from the sector buffer. */
- for (idx = 0 ; idx < 16 ; idx += 1) {
- unsigned short val = ace_readw(0x40);
- *dp++ = val & 0xff;
- *dp++ = (val>>8) & 0xff;
- }
-
- retry -= 1;
- }
-
- /* Clear the configruation controller reset */
- val = ace_readw(0x18);
- val&=~0x0080;
- ace_writew(val, 0x18);
-
- /* Count the blocks we transfer this time. */
- start += trans;
- blk_countdown -= trans;
- }
-
- release_cf_lock();
-
- return blkcnt;
-}
-#endif /* CONFIG_SYSTEMACE */
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 84932f75680..33d2e5661e4 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <command.h>
#include <rtc.h>
+#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -44,6 +45,11 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct rtc_time tm;
int rcode = 0;
+ int old_bus;
+
+ /* switch to correct I2C bus */
+ old_bus = I2C_GET_BUS();
+ I2C_SET_BUS(CFG_RTC_BUS_NUM);
switch (argc) {
case 2: /* set date & time */
@@ -56,7 +62,7 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
/* insert new date & time */
if (mk_date (argv[1], &tm) != 0) {
puts ("## Bad date format\n");
- return 1;
+ break;
}
/* and write to RTC */
rtc_set (&tm);
@@ -71,11 +77,15 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
"unknown " : RELOC(weekdays[tm.tm_wday]),
tm.tm_hour, tm.tm_min, tm.tm_sec);
- return 0;
+ break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
rcode = 1;
}
+
+ /* switch back to original I2C bus */
+ I2C_SET_BUS(old_bus);
+
return rcode;
}
diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c
index 9db64e9e3d1..4f7b049d792 100644
--- a/common/cmd_dtt.c
+++ b/common/cmd_dtt.c
@@ -28,19 +28,27 @@
#if (CONFIG_COMMANDS & CFG_CMD_DTT)
#include <dtt.h>
+#include <i2c.h>
int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int i;
unsigned char sensors[] = CONFIG_DTT_SENSORS;
+ int old_bus;
+
+ /* switch to correct I2C bus */
+ old_bus = I2C_GET_BUS();
+ I2C_SET_BUS(CFG_DTT_BUS_NUM);
/*
* Loop through sensors, read
* temperature, and output it.
*/
- for (i = 0; i < sizeof (sensors); i++) {
+ for (i = 0; i < sizeof (sensors); i++)
printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i]));
- }
+
+ /* switch back to original I2C bus */
+ I2C_SET_BUS(old_bus);
return 0;
} /* do_dtt() */
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index 5db42f2b0d6..94bd9b61e67 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -33,6 +33,7 @@
* Ext2fs support
*/
#include <common.h>
+#include <part.h>
#if (CONFIG_COMMANDS & CFG_CMD_EXT2)
#include <config.h>
@@ -57,41 +58,6 @@
#define PRINTF(fmt,args...)
#endif
-static block_dev_desc_t *get_dev (char* ifname, int dev)
-{
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
- if (strncmp(ifname,"ide",3)==0) {
- extern block_dev_desc_t * ide_get_dev(int dev);
- return((dev >= CFG_IDE_MAXDEVICE) ? NULL : ide_get_dev(dev));
- }
-#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
- if (strncmp(ifname,"scsi",4)==0) {
- extern block_dev_desc_t * scsi_get_dev(int dev);
- return((dev >= CFG_SCSI_MAXDEVICE) ? NULL : scsi_get_dev(dev));
- }
-#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE))
- if (strncmp(ifname,"usb",3)==0) {
- extern block_dev_desc_t * usb_stor_get_dev(int dev);
- return((dev >= USB_MAX_STOR_DEV) ? NULL : usb_stor_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_MMC)
- if (strncmp(ifname,"mmc",3)==0) {
- extern block_dev_desc_t * mmc_get_dev(int dev);
- return((dev >= 1) ? NULL : mmc_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_SYSTEMACE)
- if (strcmp(ifname,"ace")==0) {
- extern block_dev_desc_t * systemace_get_dev(int dev);
- return((dev >= 1) ? NULL : systemace_get_dev(dev));
- }
-#endif
- return(NULL);
-}
-
int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename = "/";
@@ -106,7 +72,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return(1);
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
- dev_desc=get_dev(argv[1],dev);
+ dev_desc = get_dev(argv[1],dev);
if (dev_desc == NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
@@ -210,7 +176,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
- dev_desc=get_dev(argv[1],dev);
+ dev_desc = get_dev(argv[1],dev);
if (dev_desc==NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return(1);
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 6844c103f22..afaf299569b 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -29,6 +29,7 @@
#include <s_record.h>
#include <net.h>
#include <ata.h>
+#include <part.h>
#if (CONFIG_COMMANDS & CFG_CMD_FAT)
@@ -37,42 +38,6 @@
#include <fat.h>
-block_dev_desc_t *get_dev (char* ifname, int dev)
-{
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
- if (strncmp(ifname,"ide",3)==0) {
- extern block_dev_desc_t * ide_get_dev(int dev);
- return(ide_get_dev(dev));
- }
-#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
- if (strncmp(ifname,"scsi",4)==0) {
- extern block_dev_desc_t * scsi_get_dev(int dev);
- return(scsi_get_dev(dev));
- }
-#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE))
- if (strncmp(ifname,"usb",3)==0) {
- extern block_dev_desc_t * usb_stor_get_dev(int dev);
- return(usb_stor_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_MMC)
- if (strncmp(ifname,"mmc",3)==0) {
- extern block_dev_desc_t * mmc_get_dev(int dev);
- return(mmc_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_SYSTEMACE)
- if (strcmp(ifname,"ace")==0) {
- extern block_dev_desc_t * systemace_get_dev(int dev);
- return(systemace_get_dev(dev));
- }
-#endif
- return NULL;
-}
-
-
int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
long size;
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index a4155029a7b..2e185cc4411 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -31,20 +31,26 @@
#include <command.h>
#include <image.h>
#include <asm/byteorder.h>
+
#if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
# include <pcmcia.h>
#endif
+
#ifdef CONFIG_8xx
# include <mpc8xx.h>
#endif
+
#ifdef CONFIG_MPC5xxx
#include <mpc5xxx.h>
#endif
+
#include <ide.h>
#include <ata.h>
+
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
+
#ifndef __PPC__
#include <asm/io.h>
#ifdef __MIPS__
@@ -182,7 +188,7 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
-ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
+ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer);
#endif
@@ -697,7 +703,7 @@ void ide_init (void)
block_dev_desc_t * ide_get_dev(int dev)
{
- return ((block_dev_desc_t *)&ide_dev_desc[dev]);
+ return (dev < CFG_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL;
}
@@ -1227,7 +1233,7 @@ static void ide_ident (block_dev_desc_t *dev_desc)
/* ------------------------------------------------------------------------- */
-ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
+ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
{
ulong n = 0;
unsigned char c;
@@ -1347,7 +1353,7 @@ IDE_READ_E:
/* ------------------------------------------------------------------------- */
-ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
+ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
{
ulong n = 0;
unsigned char c;
@@ -2009,7 +2015,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc)
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE /* max blocks */
-ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
+ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index d0fae6b24c2..fcbb0236d25 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -92,8 +92,9 @@ static ulong base_address = 0;
int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong addr, length;
- ulong i, nbytes, linebytes;
- u_char *cp;
+#if defined(CONFIG_HAS_DATAFLASH)
+ ulong nbytes, linebytes;
+#endif
int size;
int rc = 0;
@@ -128,6 +129,7 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
length = simple_strtoul(argv[2], NULL, 16);
}
+#if defined(CONFIG_HAS_DATAFLASH)
/* Print the lines.
*
* We buffer all read data, so we can make sure data is read only
@@ -136,64 +138,25 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
nbytes = length * size;
do {
char linebuf[DISP_LINE_LEN];
- uint *uip = (uint *)linebuf;
- ushort *usp = (ushort *)linebuf;
- u_char *ucp = (u_char *)linebuf;
-#ifdef CONFIG_HAS_DATAFLASH
- int rc;
-#endif
- printf("%08lx:", addr);
+ void* p;
linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
-#ifdef CONFIG_HAS_DATAFLASH
- if ((rc = read_dataflash(addr, (linebytes/size)*size, linebuf)) == DATAFLASH_OK){
- /* if outside dataflash */
- /*if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }*/
- for (i=0; i<linebytes; i+= size) {
- if (size == 4) {
- printf(" %08x", *uip++);
- } else if (size == 2) {
- printf(" %04x", *usp++);
- } else {
- printf(" %02x", *ucp++);
- }
- addr += size;
- }
+ rc = read_dataflash(addr, (linebytes/size)*size, linebuf);
+ p = (rc == DATAFLASH_OK) ? linebuf : (void*)addr;
+ print_buffer(addr, p, size, linebytes/size, DISP_LINE_LEN/size);
- } else { /* addr does not correspond to DataFlash */
-#endif
- for (i=0; i<linebytes; i+= size) {
- if (size == 4) {
- printf(" %08x", (*uip++ = *((uint *)addr)));
- } else if (size == 2) {
- printf(" %04x", (*usp++ = *((ushort *)addr)));
- } else {
- printf(" %02x", (*ucp++ = *((u_char *)addr)));
- }
- addr += size;
- }
-#ifdef CONFIG_HAS_DATAFLASH
- }
-#endif
- puts (" ");
- cp = (u_char *)linebuf;
- for (i=0; i<linebytes; i++) {
- if ((*cp < 0x20) || (*cp > 0x7e))
- putc ('.');
- else
- printf("%c", *cp);
- cp++;
- }
- putc ('\n');
nbytes -= linebytes;
+ addr += linebytes;
if (ctrlc()) {
rc = 1;
break;
}
} while (nbytes > 0);
+#else
+ /* Print the lines. */
+ print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size);
+ addr += size*length;
+#endif
dp_last_addr = addr;
dp_last_length = length;
diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c
index 508ffcbdac8..09c86e66d76 100644
--- a/common/cmd_reiser.c
+++ b/common/cmd_reiser.c
@@ -35,6 +35,7 @@
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <reiserfs.h>
+#include <part.h>
#ifndef CONFIG_DOS_PARTITION
#error DOS partition support must be selected
@@ -48,41 +49,6 @@
#define PRINTF(fmt,args...)
#endif
-static block_dev_desc_t *get_dev (char* ifname, int dev)
-{
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
- if (strncmp(ifname,"ide",3)==0) {
- extern block_dev_desc_t * ide_get_dev(int dev);
- return((dev >= CFG_IDE_MAXDEVICE) ? NULL : ide_get_dev(dev));
- }
-#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
- if (strncmp(ifname,"scsi",4)==0) {
- extern block_dev_desc_t * scsi_get_dev(int dev);
- return((dev >= CFG_SCSI_MAXDEVICE) ? NULL : scsi_get_dev(dev));
- }
-#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE))
- if (strncmp(ifname,"usb",3)==0) {
- extern block_dev_desc_t * usb_stor_get_dev(int dev);
- return((dev >= USB_MAX_STOR_DEV) ? NULL : usb_stor_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_MMC)
- if (strncmp(ifname,"mmc",3)==0) {
- extern block_dev_desc_t * mmc_get_dev(int dev);
- return((dev >= 1) ? NULL : mmc_get_dev(dev));
- }
-#endif
-#if defined(CONFIG_SYSTEMACE)
- if (strcmp(ifname,"ace")==0) {
- extern block_dev_desc_t * systemace_get_dev(int dev);
- return((dev >= 1) ? NULL : systemace_get_dev(dev));
- }
-#endif
- return NULL;
-}
-
int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename = "/";
@@ -97,7 +63,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
- dev_desc=get_dev(argv[1],dev);
+ dev_desc = get_dev(argv[1],dev);
if (dev_desc == NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
@@ -196,7 +162,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
- dev_desc=get_dev(argv[1],dev);
+ dev_desc = get_dev(argv[1],dev);
if (dev_desc==NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
return 1;
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index cc08743d5dc..da36ed9e1d1 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -74,7 +74,7 @@ void scsi_setup_inquiry(ccb * pccb);
void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer);
+ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer);
/*********************************************************************************
@@ -194,7 +194,7 @@ void scsi_init(void)
block_dev_desc_t * scsi_get_dev(int dev)
{
- return((block_dev_desc_t *)&scsi_dev_desc[dev]);
+ return (dev < CFG_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL;
}
@@ -424,7 +424,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer)
+ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
{
ulong start,blks, buf_addr;
unsigned short smallblks;
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index 28c05aa20ea..904df7159f4 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <command.h>
#include <asm/byteorder.h>
+#include <part.h>
#if (CONFIG_COMMANDS & CFG_CMD_USB)
diff --git a/common/ft_build.c b/common/ft_build.c
index 980e40f55d5..5a0575e89aa 100644
--- a/common/ft_build.c
+++ b/common/ft_build.c
@@ -29,6 +29,7 @@
#include <stddef.h>
#include <ft_build.h>
+#include <linux/ctype.h>
#undef DEBUG
@@ -180,11 +181,6 @@ void ft_finalize_tree(struct ft_cxt *cxt) {
bph->dt_strings_size = cxt->p_end - cxt->p;
}
-static inline int isprint(int c)
-{
- return c >= 0x20 && c <= 0x7e;
-}
-
static int is_printable_string(const void *data, int len)
{
const char *s = data;
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 06ea99b2f1a..196ceb73593 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -56,6 +56,7 @@
#if (CONFIG_COMMANDS & CFG_CMD_USB)
+#include <part.h>
#include <usb.h>
#ifdef CONFIG_USB_STORAGE
@@ -168,13 +169,13 @@ static struct us_data usb_stor[USB_MAX_STOR_DEV];
int usb_stor_get_info(struct usb_device *dev, struct us_data *us, block_dev_desc_t *dev_desc);
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss);
-unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer);
+unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer);
struct usb_device * usb_get_dev_index(int index);
void uhci_show_temp_int_td(void);
block_dev_desc_t *usb_stor_get_dev(int index)
{
- return &usb_dev_desc[index];
+ return (index < USB_MAX_STOR_DEV) ? &usb_dev_desc[index] : NULL;
}
@@ -940,7 +941,7 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor,
#define USB_MAX_READ_BLK 20
-unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer)
+unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer)
{
unsigned long start,blks, buf_addr;
unsigned short smallblks;
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 71c1bfab1a8..e6392340a94 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -880,10 +880,10 @@ int mpc5xxx_fec_initialize(bd_t * bis)
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
- defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \
- defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
- defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \
- defined(CONFIG_UC101)
+ defined(CONFIG_MCC200) || defined(CONFIG_MOTIONPRO) || \
+ defined(CONFIG_O2DNT) || defined(CONFIG_PM520) || \
+ defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) || \
+ defined(CONFIG_UC101) || defined(CONFIG_V38B)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
new file mode 100644
index 00000000000..19c4f764e39
--- /dev/null
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -0,0 +1,469 @@
+/*
+ * cpu/ppc4xx/40x_spd_sdram.c
+ * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
+ * SDRAM controller. Those are all current 405 PPC's.
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
+ *
+ * Based on code by:
+ *
+ * Kenneth Johansson ,Ericsson AB.
+ * kenneth.johansson@etx.ericsson.se
+ *
+ * hacked up by bill hunter. fixed so we could run before
+ * serial_init and console_init. previous version avoided this by
+ * running out of cache memory during serial/console init, then running
+ * this code later.
+ *
+ * (C) Copyright 2002
+ * Jun Gu, Artesyn Technology, jung@artesyncp.com
+ * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
+
+/*
+ * Set default values
+ */
+#ifndef CFG_I2C_SPEED
+#define CFG_I2C_SPEED 50000
+#endif
+
+#ifndef CFG_I2C_SLAVE
+#define CFG_I2C_SLAVE 0xFE
+#endif
+
+#define ONE_BILLION 1000000000
+
+#define SDRAM0_CFG_DCE 0x80000000
+#define SDRAM0_CFG_SRE 0x40000000
+#define SDRAM0_CFG_PME 0x20000000
+#define SDRAM0_CFG_MEMCHK 0x10000000
+#define SDRAM0_CFG_REGEN 0x08000000
+#define SDRAM0_CFG_ECCDD 0x00400000
+#define SDRAM0_CFG_EMDULR 0x00200000
+#define SDRAM0_CFG_DRW_SHIFT (31-6)
+#define SDRAM0_CFG_BRPF_SHIFT (31-8)
+
+#define SDRAM0_TR_CASL_SHIFT (31-8)
+#define SDRAM0_TR_PTA_SHIFT (31-13)
+#define SDRAM0_TR_CTP_SHIFT (31-15)
+#define SDRAM0_TR_LDF_SHIFT (31-17)
+#define SDRAM0_TR_RFTA_SHIFT (31-29)
+#define SDRAM0_TR_RCD_SHIFT (31-31)
+
+#define SDRAM0_RTR_SHIFT (31-15)
+#define SDRAM0_ECCCFG_SHIFT (31-11)
+
+/* SDRAM0_CFG enable macro */
+#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
+
+#define SDRAM0_BXCR_SZ_MASK 0x000e0000
+#define SDRAM0_BXCR_AM_MASK 0x0000e000
+
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
+
+#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+
+#ifdef CONFIG_SPDDRAM_SILENT
+# define SPD_ERR(x) do { return 0; } while (0)
+#else
+# define SPD_ERR(x) do { printf(x); return(0); } while (0)
+#endif
+
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+
+/* function prototypes */
+int spd_read(uint addr);
+
+
+/*
+ * This function is reading data from the DIMM module EEPROM over the SPD bus
+ * and uses that to program the sdram controller.
+ *
+ * This works on boards that has the same schematics that the AMCC walnut has.
+ *
+ * Input: null for default I2C spd functions or a pointer to a custom function
+ * returning spd_data.
+ */
+
+long int spd_sdram(int(read_spd)(uint addr))
+{
+ int tmp,row,col;
+ int total_size,bank_size,bank_code;
+ int ecc_on;
+ int mode;
+ int bank_cnt;
+
+ int sdram0_pmit=0x07c00000;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ int sdram0_besr0=-1;
+ int sdram0_besr1=-1;
+ int sdram0_eccesr=-1;
+#endif
+ int sdram0_ecccfg;
+
+ int sdram0_rtr=0;
+ int sdram0_tr=0;
+
+ int sdram0_b0cr;
+ int sdram0_b1cr;
+ int sdram0_b2cr;
+ int sdram0_b3cr;
+
+ int sdram0_cfg=0;
+
+ int t_rp;
+ int t_rcd;
+ int t_ras;
+ int t_rc;
+ int min_cas;
+
+ PPC405_SYS_INFO sys_info;
+ unsigned long bus_period_x_10;
+
+ /*
+ * get the board info
+ */
+ get_sys_info(&sys_info);
+ bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
+
+ if (read_spd == 0){
+ read_spd=spd_read;
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ }
+
+ /* Make shure we are using SDRAM */
+ if (read_spd(2) != 0x04) {
+ SPD_ERR("SDRAM - non SDRAM memory module found\n");
+ }
+
+ /* ------------------------------------------------------------------
+ * configure memory timing register
+ *
+ * data from DIMM:
+ * 27 IN Row Precharge Time ( t RP)
+ * 29 MIN RAS to CAS Delay ( t RCD)
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * -------------------------------------------------------------------*/
+
+ /*
+ * first figure out which cas latency mode to use
+ * use the min supported mode
+ */
+
+ tmp = read_spd(127) & 0x6;
+ if (tmp == 0x02) { /* only cas = 2 supported */
+ min_cas = 2;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
+ min_cas = 3;
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+ min_cas = 2;
+/* t_ck = read_spd(23); */
+/* t_ac = read_spd(24); */
+ } else {
+ SPD_ERR("SDRAM - unsupported CAS latency \n");
+ }
+
+ /* get some timing values, t_rp,t_rcd,t_ras,t_rc
+ */
+ t_rp = read_spd(27);
+ t_rcd = read_spd(29);
+ t_ras = read_spd(30);
+ t_rc = t_ras + t_rp;
+
+ /* The following timing calcs subtract 1 before deviding.
+ * this has effect of using ceiling instead of floor rounding,
+ * and also subtracting 1 to convert number to reg value
+ */
+ /* set up CASL */
+ sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
+ /* set up PTA */
+ sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
+ /* set up CTP */
+ tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
+ if (tmp < 1)
+ tmp = 1;
+ sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
+ /* set LDF = 2 cycles, reg value = 1 */
+ sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
+ /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
+ tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
+ if (tmp < 0)
+ tmp = 0;
+ if (tmp > 6)
+ tmp = 6;
+ sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
+ /* set RCD = t_rcd/bus_period*/
+ sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
+
+
+ /*------------------------------------------------------------------
+ * configure RTR register
+ * -------------------------------------------------------------------*/
+ row = read_spd(3);
+ col = read_spd(4);
+ tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
+ switch (tmp) {
+ case 0x00:
+ tmp = 15625;
+ break;
+ case 0x01:
+ tmp = 15625 / 4;
+ break;
+ case 0x02:
+ tmp = 15625 / 2;
+ break;
+ case 0x03:
+ tmp = 15625 * 2;
+ break;
+ case 0x04:
+ tmp = 15625 * 4;
+ break;
+ case 0x05:
+ tmp = 15625 * 8;
+ break;
+ default:
+ SPD_ERR("SDRAM - Bad refresh period \n");
+ }
+ /* convert from nsec to bus cycles */
+ tmp = (tmp * 10) / bus_period_x_10;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
+
+ /*------------------------------------------------------------------
+ * determine the number of banks used
+ * -------------------------------------------------------------------*/
+ /* byte 7:6 is module data width */
+ if (read_spd(7) != 0)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ tmp = read_spd(6);
+ if (tmp < 32)
+ SPD_ERR("SDRAM - unsupported module width\n");
+ else if (tmp < 64)
+ bank_cnt = 1; /* one bank per sdram side */
+ else if (tmp < 73)
+ bank_cnt = 2; /* need two banks per side */
+ else if (tmp < 161)
+ bank_cnt = 4; /* need four banks per side */
+ else
+ SPD_ERR("SDRAM - unsupported module width\n");
+
+ /* byte 5 is the module row count (refered to as dimm "sides") */
+ tmp = read_spd(5);
+ if (tmp == 1)
+ ;
+ else if (tmp==2)
+ bank_cnt *= 2;
+ else if (tmp==4)
+ bank_cnt *= 4;
+ else
+ bank_cnt = 8; /* 8 is an error code */
+
+ if (bank_cnt > 4) /* we only have 4 banks to work with */
+ SPD_ERR("SDRAM - unsupported module rows for this width\n");
+
+ /* now check for ECC ability of module. We only support ECC
+ * on 32 bit wide devices with 8 bit ECC.
+ */
+ if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
+ sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
+ ecc_on = 1;
+ } else {
+ sdram0_ecccfg = 0;
+ ecc_on = 0;
+ }
+
+ /*------------------------------------------------------------------
+ * calculate total size
+ * -------------------------------------------------------------------*/
+ /* calculate total size and do sanity check */
+ tmp = read_spd(31);
+ total_size = 1 << 22; /* total_size = 4MB */
+ /* now multiply 4M by the smallest device row density */
+ /* note that we don't support asymetric rows */
+ while (((tmp & 0x0001) == 0) && (tmp != 0)) {
+ total_size = total_size << 1;
+ tmp = tmp >> 1;
+ }
+ total_size *= read_spd(5); /* mult by module rows (dimm sides) */
+
+ /*------------------------------------------------------------------
+ * map rows * cols * banks to a mode
+ * -------------------------------------------------------------------*/
+
+ switch (row) {
+ case 11:
+ switch (col) {
+ case 8:
+ mode=4; /* mode 5 */
+ break;
+ case 9:
+ case 10:
+ mode=0; /* mode 1 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 12:
+ switch (col) {
+ case 8:
+ mode=3; /* mode 4 */
+ break;
+ case 9:
+ case 10:
+ mode=1; /* mode 2 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ case 13:
+ switch (col) {
+ case 8:
+ mode=5; /* mode 6 */
+ break;
+ case 9:
+ case 10:
+ if (read_spd(17) == 2)
+ mode = 6; /* mode 7 */
+ else
+ mode = 2; /* mode 3 */
+ break;
+ case 11:
+ mode = 2; /* mode 3 */
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+ break;
+ default:
+ SPD_ERR("SDRAM - unsupported mode\n");
+ }
+
+ /*------------------------------------------------------------------
+ * using the calculated values, compute the bank
+ * config register values.
+ * -------------------------------------------------------------------*/
+ sdram0_b1cr = 0;
+ sdram0_b2cr = 0;
+ sdram0_b3cr = 0;
+
+ /* compute the size of each bank */
+ bank_size = total_size / bank_cnt;
+ /* convert bank size to bank size code for ppc4xx
+ by takeing log2(bank_size) - 22 */
+ tmp = bank_size; /* start with tmp = bank_size */
+ bank_code = 0; /* and bank_code = 0 */
+ while (tmp > 1) { /* this takes log2 of tmp */
+ bank_code++; /* and stores result in bank_code */
+ tmp = tmp >> 1;
+ } /* bank_code is now log2(bank_size) */
+ bank_code -= 22; /* subtract 22 to get the code */
+
+ tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
+ sdram0_b0cr = (bank_size * 0) | tmp;
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ if (bank_cnt > 1)
+ sdram0_b2cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ sdram0_b1cr = (bank_size * 2) | tmp;
+ if (bank_cnt > 3)
+ sdram0_b3cr = (bank_size * 3) | tmp;
+#else
+ /* PPC405EP chip only supports two SDRAM banks */
+ if (bank_cnt > 1)
+ sdram0_b1cr = (bank_size * 1) | tmp;
+ if (bank_cnt > 2)
+ total_size = 2 * bank_size;
+#endif
+
+ /*
+ * enable sdram controller DCE=1
+ * enable burst read prefetch to 32 bytes BRPF=2
+ * leave other functions off
+ */
+
+ /*------------------------------------------------------------------
+ * now that we've done our calculations, we are ready to
+ * program all the registers.
+ * -------------------------------------------------------------------*/
+
+#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
+ /* disable memcontroller so updates work */
+ mtsdram0( mem_mcopt1, 0 );
+
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram0( mem_besra , sdram0_besr0 );
+ mtsdram0( mem_besrb , sdram0_besr1 );
+ mtsdram0( mem_ecccf , sdram0_ecccfg );
+ mtsdram0( mem_eccerr, sdram0_eccesr );
+#endif
+ mtsdram0( mem_rtr , sdram0_rtr );
+ mtsdram0( mem_pmit , sdram0_pmit );
+ mtsdram0( mem_mb0cf , sdram0_b0cr );
+ mtsdram0( mem_mb1cf , sdram0_b1cr );
+#ifndef CONFIG_405EP /* not on PPC405EP */
+ mtsdram0( mem_mb2cf , sdram0_b2cr );
+ mtsdram0( mem_mb3cf , sdram0_b3cr );
+#endif
+ mtsdram0( mem_sdtr1 , sdram0_tr );
+
+ /* SDRAM have a power on delay, 500 micro should do */
+ udelay(500);
+ sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
+ if (ecc_on)
+ sdram0_cfg |= SDRAM0_CFG_MEMCHK;
+ mtsdram0(mem_mcopt1, sdram0_cfg);
+
+ return (total_size);
+}
+
+int spd_read(uint addr)
+{
+ uchar data[2];
+
+ if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
+ return (int)data[0];
+ else
+ return 0;
+}
+
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/44x_spd_ddr.c
index c24456bea84..32d44dbe563 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -1,4 +1,8 @@
/*
+ * cpu/ppc4xx/44x_spd_ddr.c
+ * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
+ * DDR controller. Those are 440GP/GX/EP/GR.
+ *
* (C) Copyright 2001
* Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
*
@@ -43,7 +47,9 @@
#include <i2c.h>
#include <ppc4xx.h>
-#ifdef CONFIG_SPD_EEPROM
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR))
/*
* Set default values
@@ -58,414 +64,6 @@
#define ONE_BILLION 1000000000
-#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
-
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
-
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
-
-/* SDRAM0_CFG enable macro */
-#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
-
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
-
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
-
-#ifdef CONFIG_SPDDRAM_SILENT
-# define SPD_ERR(x) do { return 0; } while (0)
-#else
-# define SPD_ERR(x) do { printf(x); return(0); } while (0)
-#endif
-
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/* function prototypes */
-int spd_read(uint addr);
-
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * Input: null for default I2C spd functions or a pointer to a custom function
- * returning spd_data.
- */
-
-long int spd_sdram(int(read_spd)(uint addr))
-{
- int tmp,row,col;
- int total_size,bank_size,bank_code;
- int ecc_on;
- int mode;
- int bank_cnt;
-
- int sdram0_pmit=0x07c00000;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0=-1;
- int sdram0_besr1=-1;
- int sdram0_eccesr=-1;
-#endif
- int sdram0_ecccfg;
-
- int sdram0_rtr=0;
- int sdram0_tr=0;
-
- int sdram0_b0cr;
- int sdram0_b1cr;
- int sdram0_b2cr;
- int sdram0_b3cr;
-
- int sdram0_cfg=0;
-
- int t_rp;
- int t_rcd;
- int t_ras;
- int t_rc;
- int min_cas;
-
- PPC405_SYS_INFO sys_info;
- unsigned long bus_period_x_10;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- if (read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
- }
-
- /* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04) {
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
- /* ------------------------------------------------------------------
- * configure memory timing register
- *
- * data from DIMM:
- * 27 IN Row Precharge Time ( t RP)
- * 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- * -------------------------------------------------------------------*/
-
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
-
- tmp = read_spd(127) & 0x6;
- if (tmp == 0x02) { /* only cas = 2 supported */
- min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
- min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
- min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
- } else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
- }
-
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
-
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
- if (tmp < 1)
- tmp = 1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
- if (tmp < 0)
- tmp = 0;
- if (tmp > 6)
- tmp = 6;
- sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-
-
- /*------------------------------------------------------------------
- * configure RTR register
- * -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch (tmp) {
- case 0x00:
- tmp = 15625;
- break;
- case 0x01:
- tmp = 15625 / 4;
- break;
- case 0x02:
- tmp = 15625 / 2;
- break;
- case 0x03:
- tmp = 15625 * 2;
- break;
- case 0x04:
- tmp = 15625 * 4;
- break;
- case 0x05:
- tmp = 15625 * 8;
- break;
- default:
- SPD_ERR("SDRAM - Bad refresh period \n");
- }
- /* convert from nsec to bus cycles */
- tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-
- /*------------------------------------------------------------------
- * determine the number of banks used
- * -------------------------------------------------------------------*/
- /* byte 7:6 is module data width */
- if (read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
- tmp = read_spd(6);
- if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
- else if (tmp < 64)
- bank_cnt = 1; /* one bank per sdram side */
- else if (tmp < 73)
- bank_cnt = 2; /* need two banks per side */
- else if (tmp < 161)
- bank_cnt = 4; /* need four banks per side */
- else
- SPD_ERR("SDRAM - unsupported module width\n");
-
- /* byte 5 is the module row count (refered to as dimm "sides") */
- tmp = read_spd(5);
- if (tmp == 1)
- ;
- else if (tmp==2)
- bank_cnt *= 2;
- else if (tmp==4)
- bank_cnt *= 4;
- else
- bank_cnt = 8; /* 8 is an error code */
-
- if (bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
-
- /* now check for ECC ability of module. We only support ECC
- * on 32 bit wide devices with 8 bit ECC.
- */
- if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
- sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- } else {
- sdram0_ecccfg = 0;
- ecc_on = 0;
- }
-
- /*------------------------------------------------------------------
- * calculate total size
- * -------------------------------------------------------------------*/
- /* calculate total size and do sanity check */
- tmp = read_spd(31);
- total_size = 1 << 22; /* total_size = 4MB */
- /* now multiply 4M by the smallest device row density */
- /* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)) {
- total_size = total_size << 1;
- tmp = tmp >> 1;
- }
- total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-
- /*------------------------------------------------------------------
- * map rows * cols * banks to a mode
- * -------------------------------------------------------------------*/
-
- switch (row) {
- case 11:
- switch (col) {
- case 8:
- mode=4; /* mode 5 */
- break;
- case 9:
- case 10:
- mode=0; /* mode 1 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 12:
- switch (col) {
- case 8:
- mode=3; /* mode 4 */
- break;
- case 9:
- case 10:
- mode=1; /* mode 2 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 13:
- switch (col) {
- case 8:
- mode=5; /* mode 6 */
- break;
- case 9:
- case 10:
- if (read_spd(17) == 2)
- mode = 6; /* mode 7 */
- else
- mode = 2; /* mode 3 */
- break;
- case 11:
- mode = 2; /* mode 3 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
-
- /*------------------------------------------------------------------
- * using the calculated values, compute the bank
- * config register values.
- * -------------------------------------------------------------------*/
- sdram0_b1cr = 0;
- sdram0_b2cr = 0;
- sdram0_b3cr = 0;
-
- /* compute the size of each bank */
- bank_size = total_size / bank_cnt;
- /* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
- bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
- bank_code++; /* and stores result in bank_code */
- tmp = tmp >> 1;
- } /* bank_code is now log2(bank_size) */
- bank_code -= 22; /* subtract 22 to get the code */
-
- tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size * 0) | tmp;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- if (bank_cnt > 1)
- sdram0_b2cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- sdram0_b1cr = (bank_size * 2) | tmp;
- if (bank_cnt > 3)
- sdram0_b3cr = (bank_size * 3) | tmp;
-#else
- /* PPC405EP chip only supports two SDRAM banks */
- if (bank_cnt > 1)
- sdram0_b1cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- total_size = 2 * bank_size;
-#endif
-
- /*
- * enable sdram controller DCE=1
- * enable burst read prefetch to 32 bytes BRPF=2
- * leave other functions off
- */
-
- /*------------------------------------------------------------------
- * now that we've done our calculations, we are ready to
- * program all the registers.
- * -------------------------------------------------------------------*/
-
-#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data)
- /* disable memcontroller so updates work */
- mtsdram0( mem_mcopt1, 0 );
-
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_besra , sdram0_besr0 );
- mtsdram0( mem_besrb , sdram0_besr1 );
- mtsdram0( mem_ecccf , sdram0_ecccfg );
- mtsdram0( mem_eccerr, sdram0_eccesr );
-#endif
- mtsdram0( mem_rtr , sdram0_rtr );
- mtsdram0( mem_pmit , sdram0_pmit );
- mtsdram0( mem_mb0cf , sdram0_b0cr );
- mtsdram0( mem_mb1cf , sdram0_b1cr );
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram0( mem_mb2cf , sdram0_b2cr );
- mtsdram0( mem_mb3cf , sdram0_b3cr );
-#endif
- mtsdram0( mem_sdtr1 , sdram0_tr );
-
- /* SDRAM have a power on delay, 500 micro should do */
- udelay(500);
- sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if (ecc_on)
- sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram0(mem_mcopt1, sdram0_cfg);
-
- return (total_size);
-}
-
-int spd_read(uint addr)
-{
- uchar data[2];
-
- if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
- return (int)data[0];
- else
- return 0;
-}
-
-#else /* CONFIG_440 */
-
/*-----------------------------------------------------------------------------
| Memory Controller Options 0
+-----------------------------------------------------------------------------*/
@@ -1825,7 +1423,4 @@ void program_ecc (unsigned long num_bytes)
SDRAM_CFG0_MCHK_CHK);
}
}
-
-#endif /* CONFIG_440 */
-
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
new file mode 100644
index 00000000000..ab421196b94
--- /dev/null
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -0,0 +1,2759 @@
+/*
+ * cpu/ppc4xx/44x_spd_ddr2.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those are 440SP/SPe.
+ *
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT AMCC CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_SPD_EEPROM) && \
+ (defined(CONFIG_440SP) || defined(CONFIG_440SPE))
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define SDRAM_DDR1 1
+#define SDRAM_DDR2 2
+#define SDRAM_NONE 0
+
+#define MAXDIMMS 2
+#define MAXRANKS 4
+#define MAXBXCF 4
+#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
+
+#define ONE_BILLION 1000000000
+
+#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
+
+#if defined(DEBUG)
+static void ppc440sp_sdram_register_dump(void);
+#endif
+
+/*-----------------------------------------------------------------------------+
+ * Defines
+ *-----------------------------------------------------------------------------*/
+/* Defines for the Read Cycle Delay test */
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+
+/* Private Structure Definitions */
+
+/* enum only to ease code for cas latency setting */
+typedef enum ddr_cas_id {
+ DDR_CAS_2 = 20,
+ DDR_CAS_2_5 = 25,
+ DDR_CAS_3 = 30,
+ DDR_CAS_4 = 40,
+ DDR_CAS_5 = 50
+} ddr_cas_id_t;
+
+/*-----------------------------------------------------------------------------+
+ * Prototypes
+ *-----------------------------------------------------------------------------*/
+static unsigned long sdram_memsize(void);
+void program_tlb(u32 start, u32 size);
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas);
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas);
+static unsigned long is_ecc_enabled(void);
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+static void program_ecc_addr(unsigned long start_address,
+ unsigned long num_bytes);
+
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+static void test(void);
+#else
+static void DQS_calibration_process(void);
+#endif
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks);
+
+static u32 mfdcr_any(u32 dcr)
+{
+ u32 val;
+
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ val = mfdcr(SDRAM_R0BAS + 0);
+ break;
+ case SDRAM_R0BAS + 1:
+ val = mfdcr(SDRAM_R0BAS + 1);
+ break;
+ case SDRAM_R0BAS + 2:
+ val = mfdcr(SDRAM_R0BAS + 2);
+ break;
+ case SDRAM_R0BAS + 3:
+ val = mfdcr(SDRAM_R0BAS + 3);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ val = 0; /* just to satisfy the compiler */
+ }
+
+ return val;
+}
+
+static void mtdcr_any(u32 dcr, u32 val)
+{
+ switch (dcr) {
+ case SDRAM_R0BAS + 0:
+ mtdcr(SDRAM_R0BAS + 0, val);
+ break;
+ case SDRAM_R0BAS + 1:
+ mtdcr(SDRAM_R0BAS + 1, val);
+ break;
+ case SDRAM_R0BAS + 2:
+ mtdcr(SDRAM_R0BAS + 2, val);
+ break;
+ case SDRAM_R0BAS + 3:
+ mtdcr(SDRAM_R0BAS + 3, val);
+ break;
+ default:
+ printf("DCR %d not defined in case statement!!!\n", dcr);
+ }
+}
+
+static void wait_ddr_idle(void)
+{
+ u32 val;
+
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
+}
+
+static unsigned char spd_read(uchar chip, uint addr)
+{
+ unsigned char data[2];
+
+ if (i2c_probe(chip) == 0)
+ if (i2c_read(chip, addr, 1, data, 1) == 0)
+ return data[0];
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------------------+
+ * sdram_memsize
+ *-----------------------------------------------------------------------------*/
+static unsigned long sdram_memsize(void)
+{
+ unsigned long mem_size;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ unsigned long mb0cf;
+ unsigned long sdsz;
+ unsigned long i;
+
+ mem_size = 0;
+
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+ mfsdram(SDRAM_MCSTAT, mcstat);
+
+ /* DDR controller must be enabled and not in self-refresh. */
+ /* Otherwise memsize is zero. */
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+ for (i = 0; i < 4; i++) {
+ mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
+ /* Banks enabled */
+ if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+ sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
+
+ switch(sdsz) {
+ case SDRAM_RXBAS_SDSZ_8:
+ mem_size+=8;
+ break;
+ case SDRAM_RXBAS_SDSZ_16:
+ mem_size+=16;
+ break;
+ case SDRAM_RXBAS_SDSZ_32:
+ mem_size+=32;
+ break;
+ case SDRAM_RXBAS_SDSZ_64:
+ mem_size+=64;
+ break;
+ case SDRAM_RXBAS_SDSZ_128:
+ mem_size+=128;
+ break;
+ case SDRAM_RXBAS_SDSZ_256:
+ mem_size+=256;
+ break;
+ case SDRAM_RXBAS_SDSZ_512:
+ mem_size+=512;
+ break;
+ case SDRAM_RXBAS_SDSZ_1024:
+ mem_size+=1024;
+ break;
+ case SDRAM_RXBAS_SDSZ_2048:
+ mem_size+=2048;
+ break;
+ case SDRAM_RXBAS_SDSZ_4096:
+ mem_size+=4096;
+ break;
+ default:
+ mem_size=0;
+ break;
+ }
+ }
+ }
+ }
+
+ mem_size *= 1024 * 1024;
+ return(mem_size);
+}
+
+/*-----------------------------------------------------------------------------+
+ * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * Note: This routine runs from flash with a stack set up in the chip's
+ * sram space. It is important that the routine does not require .sbss, .bss or
+ * .data sections. It also cannot call routines that require these sections.
+ *-----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------
+ * Function: initdram
+ * Description: Configures SDRAM memory banks for DDR operation.
+ * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
+ * via the IIC bus and then configures the DDR SDRAM memory
+ * banks appropriately. If Auto Memory Configuration is
+ * not used, it is assumed that no DIMM is plugged
+ *-----------------------------------------------------------------------------*/
+long int initdram(int board_type)
+{
+ unsigned char spd0[MAX_SPD_BYTES];
+ unsigned char spd1[MAX_SPD_BYTES];
+ unsigned char *dimm_spd[MAXDIMMS];
+ unsigned long dimm_populated[MAXDIMMS];
+ unsigned char iic0_dimm_addr[MAXDIMMS];
+ unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned long val;
+ ddr_cas_id_t selected_cas;
+ unsigned long dram_size = 0;
+
+ num_dimm_banks = sizeof(iic0_dimm_addr);
+
+ /*------------------------------------------------------------------
+ * Set up an array of SPD matrixes.
+ *-----------------------------------------------------------------*/
+ dimm_spd[0] = spd0;
+ dimm_spd[1] = spd1;
+
+ /*------------------------------------------------------------------
+ * Set up an array of iic0 dimm addresses.
+ *-----------------------------------------------------------------*/
+ iic0_dimm_addr[0] = IIC0_DIMM0_ADDR;
+ iic0_dimm_addr[1] = IIC0_DIMM1_ADDR;
+
+ /*------------------------------------------------------------------
+ * Reset the DDR-SDRAM controller.
+ *-----------------------------------------------------------------*/
+ mtsdr(SDR0_SRST, 0x00200000);
+ mtsdr(SDR0_SRST, 0x00000000);
+
+ /*
+ * Make sure I2C controller is initialized
+ * before continuing.
+ */
+
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CFG_SPD_BUS_NUM);
+ i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+
+ /*------------------------------------------------------------------
+ * Clear out the serial presence detect buffers.
+ * Perform IIC reads from the dimm. Fill in the spds.
+ * Check to see if the dimm slots are populated
+ *-----------------------------------------------------------------*/
+ get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the memory type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the frequency supported for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the total rank number.
+ *-----------------------------------------------------------------*/
+ check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Check the voltage type for the dimms plugged.
+ *-----------------------------------------------------------------*/
+ check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Except Enabling of the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val &
+ ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
+ SDRAM_MCOPT2_ISIE_MASK))
+ | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
+ SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
+ SDRAM_MCOPT2_ISIE_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 1 register
+ * Note: Does not enable the memory controller.
+ *-----------------------------------------------------------------*/
+ program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM refresh register.
+ *-----------------------------------------------------------------*/
+ program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM mode register.
+ *-----------------------------------------------------------------*/
+ program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks, &selected_cas);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_WRDTR, val);
+ mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+ (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Clock Timing Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CLKTR, val);
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
+
+ /*------------------------------------------------------------------
+ * Program the BxCF registers.
+ *-----------------------------------------------------------------*/
+ program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM timing registers.
+ *-----------------------------------------------------------------*/
+ program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Set the Extended Mode register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MEMODE, val);
+ mtsdram(SDRAM_MEMODE,
+ (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
+ SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
+ (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
+ | SDRAM_MEMODE_RTT_75OHM | SDRAM_MEMODE_DQS_ENABLE));
+
+ /*------------------------------------------------------------------
+ * Program Initialization preload registers.
+ *-----------------------------------------------------------------*/
+ program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
+ selected_cas);
+
+ /*------------------------------------------------------------------
+ * Delay to ensure 200usec have elapsed since reset.
+ *-----------------------------------------------------------------*/
+ udelay(400);
+
+ /*------------------------------------------------------------------
+ * Set the memory queue core base addr.
+ *-----------------------------------------------------------------*/
+ program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+ /*------------------------------------------------------------------
+ * Program SDRAM controller options 2 register
+ * Enable the memory controller.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT2, val);
+ mtsdram(SDRAM_MCOPT2,
+ (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
+ SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
+ (SDRAM_MCOPT2_DCEN_ENABLE | SDRAM_MCOPT2_IPTR_EXECUTE));
+
+ /*------------------------------------------------------------------
+ * Wait for SDRAM_CFG0_DC_EN to complete.
+ *-----------------------------------------------------------------*/
+ do {
+ mfsdram(SDRAM_MCSTAT, val);
+ } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
+
+ /* get installed memory size */
+ dram_size = sdram_memsize();
+
+ /* and program tlb entries for this size (dynamic) */
+ program_tlb(0, dram_size);
+
+#if 1 /* TODO: ECC support will come later */
+ /*------------------------------------------------------------------
+ * If ecc is enabled, initialize the parity bits.
+ *-----------------------------------------------------------------*/
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#endif
+
+ /*------------------------------------------------------------------
+ * DQS calibration.
+ *-----------------------------------------------------------------*/
+ program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+
+#ifdef DEBUG
+ ppc440sp_sdram_register_dump();
+#endif
+
+ return dram_size;
+}
+
+static void get_spd_info(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_found;
+ unsigned char num_of_bytes;
+ unsigned char total_size;
+
+ dimm_found = FALSE;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ num_of_bytes = 0;
+ total_size = 0;
+
+ num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
+ debug("\nspd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], num_of_bytes);
+ total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
+ debug("spd_read(0x%x) returned %d\n",
+ iic0_dimm_addr[dimm_num], total_size);
+
+ if ((num_of_bytes != 0) && (total_size != 0)) {
+ dimm_populated[dimm_num] = TRUE;
+ dimm_found = TRUE;
+ debug("DIMM slot %lu: populated\n", dimm_num);
+ } else {
+ dimm_populated[dimm_num] = FALSE;
+ debug("DIMM slot %lu: Not populated\n", dimm_num);
+ }
+ }
+
+ if (dimm_found == FALSE) {
+ printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
+ hang();
+ }
+}
+
+#ifdef CONFIG_ADD_RAM_INFO
+void board_add_ram_info(int use_default)
+{
+ if (is_ecc_enabled())
+ puts(" (ECC enabled)");
+ else
+ puts(" (ECC not enabled)");
+}
+#endif
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that they
+ * really are DDR specific DIMMs.
+ *-----------------------------------------------------------------*/
+static void check_mem_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] == TRUE) {
+ dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
+ switch (dimm_type) {
+ case 1:
+ printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
+ "slot %d.\n", (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 2:
+ printf("ERROR: EDO DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 3:
+ printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 4:
+ printf("ERROR: SDRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 5:
+ printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 6:
+ printf("ERROR: SGRAM DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ case 7:
+ debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR1;
+ break;
+ case 8:
+ debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
+ dimm_populated[dimm_num] = SDRAM_DDR2;
+ break;
+ default:
+ printf("ERROR: Unknown DIMM detected in slot %d.\n",
+ (unsigned int)dimm_num);
+ printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ }
+ }
+ }
+ for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
+ if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
+ && (dimm_populated[dimm_num] != SDRAM_NONE)
+ && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
+ printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
+ hang();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies that
+ * frequency previously calculated is supported.
+ *-----------------------------------------------------------------*/
+static void check_frequency(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long tcyc_reg;
+ unsigned long cycle_time;
+ unsigned long calc_cycle_time;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ PPC440_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*
+ * calc_cycle_time is calculated from DDR frequency set by board/chip
+ * and is expressed in multiple of 10 picoseconds
+ * to match the way DIMM cycle time is calculated below.
+ */
+ calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ /*
+ * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
+ * the higher order nibble (bits 4-7) designates the cycle time
+ * to a granularity of 1ns;
+ * the value presented by the lower order nibble (bits 0-3)
+ * has a granularity of .1ns and is added to the value designated
+ * by the higher nibble. In addition, four lines of the lower order
+ * nibble are assigned to support +.25,+.33, +.66 and +.75.
+ */
+ /* Convert from hex to decimal */
+ if ((tcyc_reg & 0x0F) == 0x0D)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ else if ((tcyc_reg & 0x0F) == 0x0C)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
+ else if ((tcyc_reg & 0x0F) == 0x0B)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
+ else if ((tcyc_reg & 0x0F) == 0x0A)
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
+ else
+ cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+
+ if (cycle_time > (calc_cycle_time + 10)) {
+ /*
+ * the provided sdram cycle_time is too small
+ * for the available DIMM cycle_time.
+ * The additionnal 100ps is here to accept a small incertainty.
+ */
+ printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
+ "slot %d \n while calculated cycle time is %d ps.\n",
+ (unsigned int)(cycle_time*10),
+ (unsigned int)dimm_num,
+ (unsigned int)(calc_cycle_time*10));
+ printf("Replace the DIMM, or change DDR frequency via "
+ "strapping bits.\n\n");
+ hang();
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * For the memory DIMMs installed, this routine verifies two
+ * ranks/banks maximum are availables.
+ *-----------------------------------------------------------------*/
+static void check_rank_number(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long dimm_rank;
+ unsigned long total_rank = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ dimm_rank = (dimm_rank & 0x0F) +1;
+ else
+ dimm_rank = dimm_rank & 0x0F;
+
+
+ if (dimm_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with %d ranks in "
+ "slot %d is not supported.\n", dimm_rank, dimm_num);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ } else
+ total_rank += dimm_rank;
+ }
+ if (total_rank > MAXRANKS) {
+ printf("ERROR: DRAM DIMM detected with a total of %d ranks "
+ "for all slots.\n", (unsigned int)total_rank);
+ printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
+ printf("Remove one of the DIMM modules.\n\n");
+ hang();
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * only support 2.5V modules.
+ * This routine verifies this.
+ *-----------------------------------------------------------------*/
+static void check_voltage_type(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long voltage_type;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
+ switch (voltage_type) {
+ case 0x00:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 5.0 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ hang();
+ break;
+ case 0x01:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is LVTTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ hang();
+ break;
+ case 0x02:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 1.5 Volt.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ hang();
+ break;
+ case 0x03:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("This DIMM is 3.3 Volt/TTL.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ hang();
+ break;
+ case 0x04:
+ /* 2.5 Voltage only for DDR1 */
+ break;
+ case 0x05:
+ /* 1.8 Voltage only for DDR2 */
+ break;
+ default:
+ printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
+ printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
+ (unsigned int)dimm_num);
+ hang();
+ break;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_copt1.
+ *-----------------------------------------------------------------------------*/
+static void program_copt1(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long mcopt1;
+ unsigned long ecc_enabled;
+ unsigned long ecc = 0;
+ unsigned long data_width = 0;
+ unsigned long dimm_32bit;
+ unsigned long dimm_64bit;
+ unsigned long registered = 0;
+ unsigned long attribute = 0;
+ unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ unsigned long bankcount;
+ unsigned long ddrtype;
+ unsigned long val;
+
+ ecc_enabled = TRUE;
+ dimm_32bit = FALSE;
+ dimm_64bit = FALSE;
+ buf0 = FALSE;
+ buf1 = FALSE;
+
+ /*------------------------------------------------------------------
+ * Set memory controller options reg 1, SDRAM_MCOPT1.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, val);
+ mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
+ SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
+ SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
+ SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
+ SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
+ SDRAM_MCOPT1_DREF_MASK);
+
+ mcopt1 |= SDRAM_MCOPT1_QDEP;
+ mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
+ mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
+ mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ /* test ecc support */
+ ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
+ if (ecc != 0x02) /* ecc not supported */
+ ecc_enabled = FALSE;
+
+ /* test bank count */
+ bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
+ if (bankcount == 0x04) /* bank count = 4 */
+ mcopt1 |= SDRAM_MCOPT1_4_BANKS;
+ else /* bank count = 8 */
+ mcopt1 |= SDRAM_MCOPT1_8_BANKS;
+
+ /* test DDR type */
+ ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
+ /* test for buffered/unbuffered, registered, differential clocks */
+ registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
+ attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
+
+ /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
+ if (dimm_num == 0) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) { /* DDR2 always buffered */
+ /* TODO: what about above comments ? */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ } else {
+ /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf0 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf0 = TRUE;
+ }
+ }
+ }
+ else if (dimm_num == 1) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
+ if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
+ mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
+ if (registered == 1) {
+ /* DDR2 always buffered */
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ } else {
+ if ((attribute & 0x02) == 0x00) {
+ /* buffered not supported */
+ buf1 = FALSE;
+ } else {
+ mcopt1 |= SDRAM_MCOPT1_RDEN;
+ buf1 = TRUE;
+ }
+ }
+ }
+
+ /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
+ data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
+ (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
+
+ switch (data_width) {
+ case 72:
+ case 64:
+ dimm_64bit = TRUE;
+ break;
+ case 40:
+ case 32:
+ dimm_32bit = TRUE;
+ break;
+ default:
+ printf("WARNING: Detected a DIMM with a data width of %d bits.\n",
+ data_width);
+ printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
+ break;
+ }
+ }
+ }
+
+ /* verify matching properties */
+ if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
+ if (buf0 != buf1) {
+ printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
+ hang();
+ }
+ }
+
+ if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
+ printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
+ hang();
+ }
+ else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_64;
+ } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
+ mcopt1 |= SDRAM_MCOPT1_DMWD_32;
+ } else {
+ printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
+ hang();
+ }
+
+ if (ecc_enabled == TRUE)
+ mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
+ else
+ mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
+
+ mtsdram(SDRAM_MCOPT1, mcopt1);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_codt.
+ *-----------------------------------------------------------------------------*/
+static void program_codt(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long codt;
+ unsigned long modt0 = 0;
+ unsigned long modt1 = 0;
+ unsigned long modt2 = 0;
+ unsigned long modt3 = 0;
+ unsigned char dimm_num;
+ unsigned char dimm_rank;
+ unsigned char total_rank = 0;
+ unsigned char total_dimm = 0;
+ unsigned char dimm_type = 0;
+ unsigned char firstSlot = 0;
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Controller On Die Termination Register
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_CODT, codt);
+ codt |= (SDRAM_CODT_IO_NMODE
+ & (~SDRAM_CODT_DQS_SINGLE_END
+ & ~SDRAM_CODT_CKSE_SINGLE_END
+ & ~SDRAM_CODT_FEEBBACK_RCV_SINGLE_END
+ & ~SDRAM_CODT_FEEBBACK_DRV_SINGLE_END));
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
+ if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
+ dimm_rank = (dimm_rank & 0x0F) + 1;
+ dimm_type = SDRAM_DDR2;
+ } else {
+ dimm_rank = dimm_rank & 0x0F;
+ dimm_type = SDRAM_DDR1;
+ }
+
+ total_rank += dimm_rank;
+ total_dimm ++;
+ if ((dimm_num == 0) && (total_dimm == 1))
+ firstSlot = TRUE;
+ else
+ firstSlot = FALSE;
+ }
+ }
+ if (dimm_type == SDRAM_DDR2) {
+ codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
+ if ((total_dimm == 1) && (firstSlot == TRUE)) {
+ if (total_rank == 1) {
+ codt |= 0x00800000;
+ modt0 = 0x01000000;
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) {
+ codt |= 0x02800000;
+ modt0 = 0x06000000;
+ modt1 = 0x01800000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ } else {
+ if (total_rank == 1) {
+ codt |= 0x00800000;
+ modt0 = 0x01000000;
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 2) {
+ codt |= 0x02800000;
+ modt0 = 0x06000000;
+ modt1 = 0x01800000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+ }
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2) {
+ codt |= 0x08800000;
+ modt0 = 0x18000000;
+ modt1 = 0x00000000;
+ modt2 = 0x01800000;
+ modt3 = 0x00000000;
+ }
+ if (total_rank == 4) {
+ codt |= 0x2a800000;
+ modt0 = 0x18000000;
+ modt1 = 0x18000000;
+ modt2 = 0x01800000;
+ modt3 = 0x01800000;
+ }
+ }
+ } else {
+ codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
+ modt0 = 0x00000000;
+ modt1 = 0x00000000;
+ modt2 = 0x00000000;
+ modt3 = 0x00000000;
+
+ if (total_dimm == 1) {
+ if (total_rank == 1)
+ codt |= 0x00800000;
+ if (total_rank == 2)
+ codt |= 0x02800000;
+ }
+ if (total_dimm == 2) {
+ if (total_rank == 2)
+ codt |= 0x08800000;
+ if (total_rank == 4)
+ codt |= 0x2a800000;
+ }
+ }
+
+ debug("nb of dimm %d\n", total_dimm);
+ debug("nb of rank %d\n", total_rank);
+ if (total_dimm == 1)
+ debug("dimm in slot %d\n", firstSlot);
+
+ mtsdram(SDRAM_CODT, codt);
+ mtsdram(SDRAM_MODT0, modt0);
+ mtsdram(SDRAM_MODT1, modt1);
+ mtsdram(SDRAM_MODT2, modt2);
+ mtsdram(SDRAM_MODT3, modt3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_initplr.
+ *-----------------------------------------------------------------------------*/
+static void program_initplr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t selected_cas)
+{
+ unsigned long MR_CAS_value = 0;
+
+ /******************************************************
+ ** Assumption: if more than one DIMM, all DIMMs are the same
+ ** as already checked in check_memory_type
+ ******************************************************/
+
+ if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
+ mtsdram(SDRAM_INITPLR0, 0x81B80000);
+ mtsdram(SDRAM_INITPLR1, 0x81900400);
+ mtsdram(SDRAM_INITPLR2, 0x81810000);
+ mtsdram(SDRAM_INITPLR3, 0xff800162);
+ mtsdram(SDRAM_INITPLR4, 0x81900400);
+ mtsdram(SDRAM_INITPLR5, 0x86080000);
+ mtsdram(SDRAM_INITPLR6, 0x86080000);
+ mtsdram(SDRAM_INITPLR7, 0x81000062);
+ } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
+ switch (selected_cas) {
+ /*
+ * The CAS latency is a field of the Mode Reg
+ * that need to be set from caller input.
+ * CAS bits in Mode Reg are starting at bit 4 at least for the Micron DDR2
+ * this is the reason of the shift.
+ */
+ case DDR_CAS_3:
+ MR_CAS_value = 3 << 4;
+ break;
+ case DDR_CAS_4:
+ MR_CAS_value = 4 << 4;
+ break;
+ case DDR_CAS_5:
+ MR_CAS_value = 5 << 4;
+ break;
+ default:
+ printf("ERROR: ucode error on selected_cas value %d", (unsigned char)selected_cas);
+ hang();
+ break;
+ }
+
+ mtsdram(SDRAM_INITPLR0, 0xB5380000); /* NOP */
+ mtsdram(SDRAM_INITPLR1, 0x82100400); /* precharge 8 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR2, 0x80820000); /* EMR2 */
+ mtsdram(SDRAM_INITPLR3, 0x80830000); /* EMR3 */
+ mtsdram(SDRAM_INITPLR4, 0x80810000); /* EMR DLL ENABLE */
+ mtsdram(SDRAM_INITPLR5, 0x80800502 | MR_CAS_value); /* MR w/ DLL reset */
+ mtsdram(SDRAM_INITPLR6, 0x82100400); /* precharge 8 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR7, 0x8a080000); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR8, 0x8a080000); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR9, 0x8a080000); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR10, 0x8a080000); /* Refresh 50 DDR clock cycle */
+ mtsdram(SDRAM_INITPLR11, 0x80800402 | MR_CAS_value); /* MR w/o DLL reset */
+ mtsdram(SDRAM_INITPLR12, 0x80810380); /* EMR OCD Default */
+ mtsdram(SDRAM_INITPLR13, 0x80810000); /* EMR OCD Exit */
+ } else {
+ printf("ERROR: ucode error as unknown DDR type in program_initplr");
+ hang();
+ }
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_MMODE register.
+ * the selected_cas is an output parameter, that will be passed
+ * by caller to call the above program_initplr( )
+ *-----------------------------------------------------------------*/
+static void program_mode(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks,
+ ddr_cas_id_t *selected_cas)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_wr_ns;
+ unsigned long t_wr_clk;
+ unsigned long cas_bit;
+ unsigned long cas_index;
+ unsigned long sdram_freq;
+ unsigned long ddr_check;
+ unsigned long mmode;
+ unsigned long tcyc_reg;
+ unsigned long cycle_2_0_clk;
+ unsigned long cycle_2_5_clk;
+ unsigned long cycle_3_0_clk;
+ unsigned long cycle_4_0_clk;
+ unsigned long cycle_5_0_clk;
+ unsigned long max_2_0_tcyc_ns_x_100;
+ unsigned long max_2_5_tcyc_ns_x_100;
+ unsigned long max_3_0_tcyc_ns_x_100;
+ unsigned long max_4_0_tcyc_ns_x_100;
+ unsigned long max_5_0_tcyc_ns_x_100;
+ unsigned long cycle_time_ns_x_100[3];
+ PPC440_SYS_INFO board_cfg;
+ unsigned char cas_2_0_available;
+ unsigned char cas_2_5_available;
+ unsigned char cas_3_0_available;
+ unsigned char cas_4_0_available;
+ unsigned char cas_5_0_available;
+ unsigned long sdr_ddrpll;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_wr_ns = 0;
+ cas_2_0_available = TRUE;
+ cas_2_5_available = TRUE;
+ cas_3_0_available = TRUE;
+ cas_4_0_available = TRUE;
+ cas_5_0_available = TRUE;
+ max_2_0_tcyc_ns_x_100 = 10;
+ max_2_5_tcyc_ns_x_100 = 10;
+ max_3_0_tcyc_ns_x_100 = 10;
+ max_4_0_tcyc_ns_x_100 = 10;
+ max_5_0_tcyc_ns_x_100 = 10;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR1)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
+ cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
+
+ /* For a particular DIMM, grab the three CAS values it supports */
+ for (cas_index = 0; cas_index < 3; cas_index++) {
+ switch (cas_index) {
+ case 0:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
+ break;
+ case 1:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
+ break;
+ default:
+ tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
+ break;
+ }
+
+ if ((tcyc_reg & 0x0F) >= 10) {
+ if ((tcyc_reg & 0x0F) == 0x0D) {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
+ } else {
+ printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
+ "in slot %d\n", (unsigned int)dimm_num);
+ hang();
+ }
+ } else {
+ /* Convert from hex to decimal */
+ cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) +
+ ((tcyc_reg & 0x0F)*10);
+ }
+ }
+
+ /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
+ /* supported for a particular DIMM. */
+ cas_index = 0;
+
+ if (sdram_ddr1) {
+ /*
+ * DDR devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
+ */
+ if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_5_available = FALSE;
+ }
+
+ if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_2_0_available = FALSE;
+ }
+ } else {
+ /*
+ * DDR2 devices use the following bitmask for CAS latency:
+ * Bit 7 6 5 4 3 2 1 0
+ * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
+ */
+ if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_5_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_4_0_available = FALSE;
+ }
+
+ if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) {
+ max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]);
+ cas_index++;
+ } else {
+ if (cas_index != 0)
+ cas_index++;
+ cas_3_0_available = FALSE;
+ }
+ }
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM mode, SDRAM_MMODE
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MMODE, mmode);
+ mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
+
+ cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100);
+ cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100);
+ cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100);
+ cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100);
+ cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100);
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
+ *selected_cas = DDR_CAS_2;
+ } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
+ *selected_cas = DDR_CAS_2_5;
+ } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
+ hang();
+ }
+ } else { /* DDR2 */
+ if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
+ *selected_cas = DDR_CAS_3;
+ } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
+ *selected_cas = DDR_CAS_4;
+ } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
+ mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
+ *selected_cas = DDR_CAS_5;
+ } else {
+ printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
+ printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
+ printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
+ hang();
+ }
+ }
+
+ if (sdram_ddr1 == TRUE)
+ mmode |= SDRAM_MMODE_WR_DDR1;
+ else {
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ t_wr_ns = max(t_wr_ns,
+ spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
+ if (sdram_freq != ddr_check)
+ t_wr_clk++;
+
+ switch (t_wr_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
+ break;
+ case 4:
+ mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
+ break;
+ case 5:
+ mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
+ break;
+ default:
+ mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
+ break;
+ }
+ }
+
+ mtsdram(SDRAM_MMODE, mmode);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_rtr.
+ *-----------------------------------------------------------------------------*/
+static void program_rtr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ PPC440_SYS_INFO board_cfg;
+ unsigned long max_refresh_rate;
+ unsigned long dimm_num;
+ unsigned long refresh_rate_type;
+ unsigned long refresh_rate;
+ unsigned long rint;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+ unsigned long val;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Refresh Timing Register, SDRAM_RTR
+ *-----------------------------------------------------------------*/
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ max_refresh_rate = 0;
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+
+ refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
+ refresh_rate_type &= 0x7F;
+ switch (refresh_rate_type) {
+ case 0:
+ refresh_rate = 15625;
+ break;
+ case 1:
+ refresh_rate = 3906;
+ break;
+ case 2:
+ refresh_rate = 7812;
+ break;
+ case 3:
+ refresh_rate = 31250;
+ break;
+ case 4:
+ refresh_rate = 62500;
+ break;
+ case 5:
+ refresh_rate = 125000;
+ break;
+ default:
+ refresh_rate = 0;
+ printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
+ (unsigned int)dimm_num);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ break;
+ }
+
+ max_refresh_rate = max(max_refresh_rate, refresh_rate);
+ }
+ }
+
+ rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
+ mfsdram(SDRAM_RTR, val);
+ mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
+ (SDRAM_RTR_RINT_ENCODE(rint)));
+}
+
+/*------------------------------------------------------------------
+ * This routine programs the SDRAM_TRx registers.
+ *-----------------------------------------------------------------*/
+static void program_tr(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long sdram_ddr1;
+ unsigned long t_rp_ns;
+ unsigned long t_rcd_ns;
+ unsigned long t_rrd_ns;
+ unsigned long t_ras_ns;
+ unsigned long t_rc_ns;
+ unsigned long t_rfc_ns;
+ unsigned long t_wpc_ns;
+ unsigned long t_wtr_ns;
+ unsigned long t_rpc_ns;
+ unsigned long t_rp_clk;
+ unsigned long t_rcd_clk;
+ unsigned long t_rrd_clk;
+ unsigned long t_ras_clk;
+ unsigned long t_rc_clk;
+ unsigned long t_rfc_clk;
+ unsigned long t_wpc_clk;
+ unsigned long t_wtr_clk;
+ unsigned long t_rpc_clk;
+ unsigned long sdtr1, sdtr2, sdtr3;
+ unsigned long ddr_check;
+ unsigned long sdram_freq;
+ unsigned long sdr_ddrpll;
+
+ PPC440_SYS_INFO board_cfg;
+
+ /*------------------------------------------------------------------
+ * Get the board configuration info.
+ *-----------------------------------------------------------------*/
+ get_sys_info(&board_cfg);
+
+ mfsdr(sdr_ddr0, sdr_ddrpll);
+ sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+
+ /*------------------------------------------------------------------
+ * Handle the timing. We need to find the worst case timing of all
+ * the dimm modules installed.
+ *-----------------------------------------------------------------*/
+ t_rp_ns = 0;
+ t_rrd_ns = 0;
+ t_rcd_ns = 0;
+ t_ras_ns = 0;
+ t_rc_ns = 0;
+ t_rfc_ns = 0;
+ t_wpc_ns = 0;
+ t_wtr_ns = 0;
+ t_rpc_ns = 0;
+ sdram_ddr1 = TRUE;
+
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ if (dimm_populated[dimm_num] == SDRAM_DDR2)
+ sdram_ddr1 = TRUE;
+ else
+ sdram_ddr1 = FALSE;
+
+ t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
+ t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
+ t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
+ t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
+ t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
+ t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 1, SDRAM_TR1
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR1, sdtr1);
+ sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
+ SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
+
+ /* default values */
+ sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
+
+ /* normal operations */
+ sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
+ sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
+
+ mtsdram(SDRAM_SDTR1, sdtr1);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 2, SDRAM_TR2
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR2, sdtr2);
+ sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
+ SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
+ SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
+ SDRAM_SDTR2_RRD_MASK);
+
+ /*
+ * convert t_rcd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
+ if (sdram_freq != ddr_check)
+ t_rcd_clk++;
+
+ switch (t_rcd_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
+ break;
+ }
+
+ if (sdram_ddr1 == TRUE) { /* DDR1 */
+ if (sdram_freq < 200000000) {
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ } else {
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ }
+ } else { /* DDR2 */
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
+ t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
+ t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
+ }
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
+ if (sdram_freq != ddr_check)
+ t_wpc_clk++;
+
+ switch (t_wpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
+ if (sdram_freq != ddr_check)
+ t_wtr_clk++;
+
+ switch (t_wtr_clk) {
+ case 0:
+ case 1:
+ sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
+ break;
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
+ break;
+ }
+
+ /*
+ * convert from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
+ if (sdram_freq != ddr_check)
+ t_rpc_clk++;
+
+ switch (t_rpc_clk) {
+ case 0:
+ case 1:
+ case 2:
+ sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
+ break;
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
+ break;
+ }
+ }
+
+ /* default value */
+ sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
+
+ /*
+ * convert t_rrd from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
+ if (sdram_freq != ddr_check)
+ t_rrd_clk++;
+
+ if (t_rrd_clk == 3)
+ sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
+ else
+ sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
+
+ /*
+ * convert t_rp from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
+ if (sdram_freq != ddr_check)
+ t_rp_clk++;
+
+ switch (t_rp_clk) {
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
+ break;
+ case 4:
+ sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
+ break;
+ case 5:
+ sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
+ break;
+ case 6:
+ sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
+ break;
+ default:
+ sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
+ break;
+ }
+
+ mtsdram(SDRAM_SDTR2, sdtr2);
+
+ /*------------------------------------------------------------------
+ * Set the SDRAM Timing Reg 3, SDRAM_TR3
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_SDTR3, sdtr3);
+ sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
+ SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
+
+ /*
+ * convert t_ras from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
+ if (sdram_freq != ddr_check)
+ t_ras_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
+
+ /*
+ * convert t_rc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
+ if (sdram_freq != ddr_check)
+ t_rc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
+
+ /* default xcs value */
+ sdtr3 |= SDRAM_SDTR3_XCS;
+
+ /*
+ * convert t_rfc from nanoseconds to ddr clocks
+ * round up if necessary
+ */
+ t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
+ ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
+ if (sdram_freq != ddr_check)
+ t_rfc_clk++;
+
+ sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
+
+ mtsdram(SDRAM_SDTR3, sdtr3);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_bxcf.
+ *-----------------------------------------------------------------------------*/
+static void program_bxcf(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long num_col_addr;
+ unsigned long num_ranks;
+ unsigned long num_banks;
+ unsigned long mode;
+ unsigned long ind_rank;
+ unsigned long ind;
+ unsigned long ind_bank;
+ unsigned long bank_0_populated;
+
+ /*------------------------------------------------------------------
+ * Set the BxCF regs. First, wipe out the bank config registers.
+ *-----------------------------------------------------------------*/
+ mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF);
+ mtdcr(SDRAMC_CFGDATA, 0x00000000);
+ mtdcr(SDRAMC_CFGADDR, SDRAM_MB1CF);
+ mtdcr(SDRAMC_CFGDATA, 0x00000000);
+ mtdcr(SDRAMC_CFGADDR, SDRAM_MB2CF);
+ mtdcr(SDRAMC_CFGDATA, 0x00000000);
+ mtdcr(SDRAMC_CFGADDR, SDRAM_MB3CF);
+ mtdcr(SDRAMC_CFGDATA, 0x00000000);
+
+ mode = SDRAM_BXCF_M_BE_ENABLE;
+
+ bank_0_populated = 0;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) +1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
+
+ for (ind_bank = 0; ind_bank < 2; ind_bank++) {
+ if (num_banks == 4)
+ ind = 0;
+ else
+ ind = 5;
+ switch (num_col_addr) {
+ case 0x08:
+ mode |= (SDRAM_BXCF_M_AM_0 + ind);
+ break;
+ case 0x09:
+ mode |= (SDRAM_BXCF_M_AM_1 + ind);
+ break;
+ case 0x0A:
+ mode |= (SDRAM_BXCF_M_AM_2 + ind);
+ break;
+ case 0x0B:
+ mode |= (SDRAM_BXCF_M_AM_3 + ind);
+ break;
+ case 0x0C:
+ mode |= (SDRAM_BXCF_M_AM_4 + ind);
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for number of "
+ "column addresses: %d.\n", (unsigned int)num_col_addr);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
+ }
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
+ bank_0_populated = 1;
+
+ for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
+ mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF + ((dimm_num + bank_0_populated + ind_rank) << 2));
+ mtdcr(SDRAMC_CFGDATA, mode);
+ }
+ }
+ }
+}
+
+/*------------------------------------------------------------------
+ * program memory queue.
+ *-----------------------------------------------------------------*/
+static void program_memory_queue(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long dimm_num;
+ unsigned long rank_base_addr;
+ unsigned long rank_reg;
+ unsigned long rank_size_bytes;
+ unsigned long rank_size_id;
+ unsigned long num_ranks;
+ unsigned long baseadd_size;
+ unsigned long i;
+ unsigned long bank_0_populated = 0;
+
+ /*------------------------------------------------------------------
+ * Reset the rank_base_address.
+ *-----------------------------------------------------------------*/
+ rank_reg = SDRAM_R0BAS;
+
+ rank_base_addr = 0x00000000;
+
+ for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
+ if (dimm_populated[dimm_num] != SDRAM_NONE) {
+ num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
+ if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
+ num_ranks = (num_ranks & 0x0F) + 1;
+ else
+ num_ranks = num_ranks & 0x0F;
+
+ rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
+
+ /*------------------------------------------------------------------
+ * Set the sizes
+ *-----------------------------------------------------------------*/
+ baseadd_size = 0;
+ rank_size_bytes = 1024 * 1024 * rank_size_id;
+ switch (rank_size_id) {
+ case 0x02:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_8;
+ break;
+ case 0x04:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_16;
+ break;
+ case 0x08:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_32;
+ break;
+ case 0x10:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_64;
+ break;
+ case 0x20:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_128;
+ break;
+ case 0x40:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_256;
+ break;
+ case 0x80:
+ baseadd_size |= SDRAM_RXBAS_SDSZ_512;
+ break;
+ default:
+ printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
+ (unsigned int)dimm_num);
+ printf("ERROR: Unsupported value for the banksize: %d.\n",
+ (unsigned int)rank_size_id);
+ printf("Replace the DIMM module with a supported DIMM.\n\n");
+ hang();
+ }
+
+ if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
+ bank_0_populated = 1;
+
+ for (i = 0; i < num_ranks; i++) {
+ mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
+ (rank_base_addr & SDRAM_RXBAS_SDBA_MASK) |
+ baseadd_size);
+ rank_base_addr += rank_size_bytes;
+ }
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------------+
+ * is_ecc_enabled.
+ *-----------------------------------------------------------------------------*/
+static unsigned long is_ecc_enabled(void)
+{
+ unsigned long dimm_num;
+ unsigned long ecc;
+ unsigned long val;
+
+ ecc = 0;
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ mfsdram(SDRAM_MCOPT1, val);
+ ecc = max(ecc, SDRAM_MCOPT1_MCHK_CHK_DECODE(val));
+ }
+
+ return(ecc);
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_ecc.
+ *-----------------------------------------------------------------------------*/
+static void program_ecc(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long mcopt1;
+ unsigned long mcopt2;
+ unsigned long mcstat;
+ unsigned long dimm_num;
+ unsigned long ecc;
+
+ ecc = 0;
+ /* loop through all the DIMM slots on the board */
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ /* If a dimm is installed in a particular slot ... */
+ if (dimm_populated[dimm_num] != SDRAM_NONE)
+ ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
+ }
+ if (ecc == 0)
+ return;
+
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ mfsdram(SDRAM_MCOPT2, mcopt2);
+
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ /* DDR controller must be enabled and not in self-refresh. */
+ mfsdram(SDRAM_MCSTAT, mcstat);
+ if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
+ && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
+ && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
+ == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
+
+ program_ecc_addr(0, sdram_memsize());
+ }
+ }
+
+ return;
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_ecc_addr.
+ *-----------------------------------------------------------------------------*/
+static void program_ecc_addr(unsigned long start_address,
+ unsigned long num_bytes)
+{
+ unsigned long current_address;
+ unsigned long end_address;
+ unsigned long address_increment;
+ unsigned long mcopt1;
+
+ current_address = start_address;
+ mfsdram(SDRAM_MCOPT1, mcopt1);
+ if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ /* ECC bit set method for non-cached memory */
+ if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
+ address_increment = 4;
+ else
+ address_increment = 8;
+ end_address = current_address + num_bytes;
+
+ while (current_address < end_address) {
+ *((unsigned long *)current_address) = 0x00000000;
+ current_address += address_increment;
+ }
+ sync();
+ eieio();
+ wait_ddr_idle();
+
+ mtsdram(SDRAM_MCOPT1,
+ (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK);
+ sync();
+ eieio();
+ wait_ddr_idle();
+ }
+}
+
+/*-----------------------------------------------------------------------------+
+ * program_DQS_calibration.
+ *-----------------------------------------------------------------------------*/
+static void program_DQS_calibration(unsigned long *dimm_populated,
+ unsigned char *iic0_dimm_addr,
+ unsigned long num_dimm_banks)
+{
+ unsigned long val;
+
+#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
+ mtsdram(SDRAM_RQDC, 0x80000037);
+ mtsdram(SDRAM_RDCC, 0x40000000);
+ mtsdram(SDRAM_RFDC, 0x000001DF);
+
+ test();
+#else
+ /*------------------------------------------------------------------
+ * Program RDCC register
+ * Read sample cycle auto-update enable
+ *-----------------------------------------------------------------*/
+
+ /*
+ * Modified for the Katmai platform: with some DIMMs, the DDR2
+ * controller automatically selects the T2 read cycle, but this
+ * proves unreliable. Go ahead and force the DDR2 controller
+ * to use the T4 sample and disable the automatic update of the
+ * RDSS field.
+ */
+ mfsdram(SDRAM_RDCC, val);
+ mtsdram(SDRAM_RDCC,
+ (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
+ | (SDRAM_RDCC_RDSS_T4 | SDRAM_RDCC_RSAE_DISABLE));
+
+ /*------------------------------------------------------------------
+ * Program RQDC register
+ * Internal DQS delay mechanism enable
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
+
+ /*------------------------------------------------------------------
+ * Program RFDC register
+ * Set Feedback Fractional Oversample
+ * Auto-detect read sample cycle enable
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_RFDC, val);
+ mtsdram(SDRAM_RFDC,
+ (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
+ SDRAM_RFDC_RFFD_MASK))
+ | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0) |
+ SDRAM_RFDC_RFFD_ENCODE(0)));
+
+ DQS_calibration_process();
+#endif
+}
+
+static u32 short_mem_test(void)
+{
+ u32 *membase;
+ u32 bxcr_num;
+ u32 bxcf;
+ int i;
+ int j;
+ u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+
+ for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
+
+ /* Banks enabled */
+ if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+
+ /* Bank is enabled */
+ membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ break;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ if (j < NUMMEMWORDS)
+ break;
+ }
+ if (i < NUMMEMTESTS)
+ break;
+ } /* if bank enabled */
+ } /* for bxcf_num */
+
+ return bxcr_num;
+}
+
+#ifndef HARD_CODED_DQS
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void DQS_calibration_process(void)
+{
+ unsigned long ecc_temp;
+ unsigned long rfdc_reg;
+ unsigned long rffd;
+ unsigned long rqdc_reg;
+ unsigned long rqfd;
+ unsigned long bxcr_num;
+ unsigned long val;
+ long rqfd_average;
+ long rffd_average;
+ long max_start;
+ long min_end;
+ unsigned long begin_rqfd[MAXRANKS];
+ unsigned long begin_rffd[MAXRANKS];
+ unsigned long end_rqfd[MAXRANKS];
+ unsigned long end_rffd[MAXRANKS];
+ char window_found;
+ unsigned long dlycal;
+ unsigned long dly_val;
+ unsigned long max_pass_length;
+ unsigned long current_pass_length;
+ unsigned long current_fail_length;
+ unsigned long current_start;
+ long max_end;
+ unsigned char fail_found;
+ unsigned char pass_found;
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, ecc_temp);
+ ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
+ SDRAM_MCOPT1_MCHK_NON);
+
+ max_start = 0;
+ min_end = 0;
+ begin_rqfd[0] = 0;
+ begin_rffd[0] = 0;
+ begin_rqfd[1] = 0;
+ begin_rffd[1] = 0;
+ end_rqfd[0] = 0;
+ end_rffd[0] = 0;
+ end_rqfd[1] = 0;
+ end_rffd[1] = 0;
+ window_found = FALSE;
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
+ /* rqdc_reg = mfsdram(SDRAM_RQDC) & ~(SDRAM_RQDC_RQFD_MASK); */
+
+ /*
+ * get the delay line calibration register value
+ */
+ mfsdram(SDRAM_DLCR, dlycal);
+ dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
+
+ for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+ mfsdram(SDRAM_RFDC, rfdc_reg);
+ rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+ /* do the small memory test */
+ bxcr_num = short_mem_test();
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (bxcr_num == MAXBXCF) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rffd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rffd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (current_fail_length >= (dly_val >> 2)) {
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+ } /* for rffd */
+
+
+ /*------------------------------------------------------------------
+ * Set the average RFFD value
+ *-----------------------------------------------------------------*/
+ rffd_average = ((max_start + max_end) >> 1);
+
+ if (rffd_average < 0)
+ rffd_average = 0;
+
+ if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+ rffd_average = SDRAM_RFDC_RFFD_MAX;
+ /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
+ mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+ max_pass_length = 0;
+ max_start = 0;
+ max_end = 0;
+ current_pass_length = 0;
+ current_fail_length = 0;
+ current_start = 0;
+ window_found = FALSE;
+ fail_found = FALSE;
+ pass_found = FALSE;
+
+ for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+ mfsdram(SDRAM_RQDC, rqdc_reg);
+ rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+
+ /*------------------------------------------------------------------
+ * Set the timing reg for the test.
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+ /* do the small memory test */
+ bxcr_num = short_mem_test();
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (bxcr_num == MAXBXCF) {
+ if (fail_found == TRUE) {
+ pass_found = TRUE;
+ if (current_pass_length == 0)
+ current_start = rqfd;
+
+ current_fail_length = 0;
+ current_pass_length++;
+
+ if (current_pass_length > max_pass_length) {
+ max_pass_length = current_pass_length;
+ max_start = current_start;
+ max_end = rqfd;
+ }
+ }
+ } else {
+ current_pass_length = 0;
+ current_fail_length++;
+
+ if (fail_found == FALSE) {
+ fail_found = TRUE;
+ } else if (pass_found == TRUE) {
+ window_found = TRUE;
+ break;
+ }
+ }
+ }
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ hang();
+ }
+
+ rqfd_average = ((max_start + max_end) >> 1);
+
+ if (rqfd_average < 0)
+ rqfd_average = 0;
+
+ if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+ rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+ /*------------------------------------------------------------------
+ * Restore the ECC variable to what it originally was
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | ecc_temp);
+
+ mtsdram(SDRAM_RQDC,
+ (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+ SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+ mfsdram(SDRAM_DLCR, val);
+ debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RQDC, val);
+ debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ mfsdram(SDRAM_RFDC, val);
+ debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+}
+#else /* calibration test with hardvalues */
+/*-----------------------------------------------------------------------------+
+ * DQS_calibration_process.
+ *-----------------------------------------------------------------------------*/
+static void test(void)
+{
+ unsigned long dimm_num;
+ unsigned long ecc_temp;
+ unsigned long i, j;
+ unsigned long *membase;
+ unsigned long bxcf[MAXRANKS];
+ unsigned long val;
+ char window_found;
+ char begin_found[MAXDIMMS];
+ char end_found[MAXDIMMS];
+ char search_end[MAXDIMMS];
+ unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
+ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+ 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+ 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+ 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+ 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+ 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+ 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+ 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+ 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
+
+ /*------------------------------------------------------------------
+ * Test to determine the best read clock delay tuning bits.
+ *
+ * Before the DDR controller can be used, the read clock delay needs to be
+ * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+ * This value cannot be hardcoded into the program because it changes
+ * depending on the board's setup and environment.
+ * To do this, all delay values are tested to see if they
+ * work or not. By doing this, you get groups of fails with groups of
+ * passing values. The idea is to find the start and end of a passing
+ * window and take the center of it to use as the read clock delay.
+ *
+ * A failure has to be seen first so that when we hit a pass, we know
+ * that it is truely the start of the window. If we get passing values
+ * to start off with, we don't know if we are at the start of the window.
+ *
+ * The code assumes that a failure will always be found.
+ * If a failure is not found, there is no easy way to get the middle
+ * of the passing window. I guess we can pretty much pick any value
+ * but some values will be better than others. Since the lowest speed
+ * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+ * from experimentation it is safe to say you will always have a failure.
+ *-----------------------------------------------------------------*/
+ mfsdram(SDRAM_MCOPT1, ecc_temp);
+ ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
+ mfsdram(SDRAM_MCOPT1, val);
+ mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
+ SDRAM_MCOPT1_MCHK_NON);
+
+ window_found = FALSE;
+ begin_found[0] = FALSE;
+ end_found[0] = FALSE;
+ search_end[0] = FALSE;
+ begin_found[1] = FALSE;
+ end_found[1] = FALSE;
+ search_end[1] = FALSE;
+
+ for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+ mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
+
+ /* Banks enabled */
+ if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
+
+ /* Bank is enabled */
+ membase =
+ (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
+
+ /*------------------------------------------------------------------
+ * Run the short memory test.
+ *-----------------------------------------------------------------*/
+ for (i = 0; i < NUMMEMTESTS; i++) {
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ membase[j] = test[i][j];
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ for (j = 0; j < NUMMEMWORDS; j++) {
+ if (membase[j] != test[i][j]) {
+ ppcDcbf((u32)&(membase[j]));
+ break;
+ }
+ ppcDcbf((u32)&(membase[j]));
+ }
+ sync();
+ if (j < NUMMEMWORDS)
+ break;
+ }
+
+ /*------------------------------------------------------------------
+ * See if the rffd value passed.
+ *-----------------------------------------------------------------*/
+ if (i < NUMMEMTESTS) {
+ if ((end_found[dimm_num] == FALSE) &&
+ (search_end[dimm_num] == TRUE)) {
+ end_found[dimm_num] = TRUE;
+ }
+ if ((end_found[0] == TRUE) &&
+ (end_found[1] == TRUE))
+ break;
+ } else {
+ if (begin_found[dimm_num] == FALSE) {
+ begin_found[dimm_num] = TRUE;
+ search_end[dimm_num] = TRUE;
+ }
+ }
+ } else {
+ begin_found[dimm_num] = TRUE;
+ end_found[dimm_num] = TRUE;
+ }
+ }
+
+ if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
+ window_found = TRUE;
+
+ /*------------------------------------------------------------------
+ * Make sure we found the valid read passing window. Halt if not
+ *-----------------------------------------------------------------*/
+ if (window_found == FALSE) {
+ printf("ERROR: Cannot determine a common read delay for the "
+ "DIMM(s) installed.\n");
+ hang();
+ }
+
+ /*------------------------------------------------------------------
+ * Restore the ECC variable to what it originally was
+ *-----------------------------------------------------------------*/
+ mtsdram(SDRAM_MCOPT1,
+ (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
+ | ecc_temp);
+}
+#endif
+
+#if defined(DEBUG)
+static void ppc440sp_sdram_register_dump(void)
+{
+ unsigned int sdram_reg;
+ unsigned int sdram_data;
+ unsigned int dcr_data;
+
+ printf("\n Register Dump:\n");
+ sdram_reg = SDRAM_MCSTAT;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MCSTAT = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MCOPT1;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MCOPT1 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MCOPT2;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MCOPT2 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MODT0;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MODT0 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MODT1;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MODT1 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MODT2;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MODT2 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MODT3;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MODT3 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_CODT;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_CODT = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_VVPR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_VVPR = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_OPARS;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_OPARS = 0x%08X\n", sdram_data);
+ /*
+ * OPAR2 is only used as a trigger register.
+ * No data is contained in this register, and reading or writing
+ * to is can cause bad things to happen (hangs). Just skip it
+ * and report NA
+ * sdram_reg = SDRAM_OPAR2;
+ * mfsdram(sdram_reg, sdram_data);
+ * printf(" SDRAM_OPAR2 = 0x%08X\n", sdram_data);
+ */
+ printf(" SDRAM_OPART = N/A ");
+ sdram_reg = SDRAM_RTR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_RTR = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MB0CF;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MB0CF = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MB1CF;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MB1CF = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MB2CF;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MB2CF = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MB3CF;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MB3CF = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR0;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR0 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR1;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR1 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR2;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR2 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR3;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR3 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR4;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR4 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR5;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR5 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR6;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR6 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR7;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR7 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR8;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR8 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR9;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR9 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR10;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR10 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR11;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR11 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR12;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR12 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR13;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR13 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_INITPLR14;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR14 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_INITPLR15;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_INITPLR15 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_RQDC;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_RQDC = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_RFDC;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_RFDC = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_RDCC;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_RDCC = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_DLCR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_DLCR = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_CLKTR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_CLKTR = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_WRDTR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_WRDTR = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_SDTR1;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_SDTR1 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_SDTR2;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_SDTR2 = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_SDTR3;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_SDTR3 = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_MMODE;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MMODE = 0x%08X\n", sdram_data);
+ sdram_reg = SDRAM_MEMODE;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_MEMODE = 0x%08X", sdram_data);
+ sdram_reg = SDRAM_ECCCR;
+ mfsdram(sdram_reg, sdram_data);
+ printf(" SDRAM_ECCCR = 0x%08X\n\n", sdram_data);
+
+ dcr_data = mfdcr(SDRAM_R0BAS);
+ printf(" MQ0_B0BAS = 0x%08X", dcr_data);
+ dcr_data = mfdcr(SDRAM_R1BAS);
+ printf(" MQ1_B0BAS = 0x%08X\n", dcr_data);
+ dcr_data = mfdcr(SDRAM_R2BAS);
+ printf(" MQ2_B0BAS = 0x%08X", dcr_data);
+ dcr_data = mfdcr(SDRAM_R3BAS);
+ printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
+}
+#endif
+#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index baecf70352a..96f0f62eb60 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -31,7 +31,8 @@ COBJS = 405gp_pci.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o \
- spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
+ 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
+ tlb.o traps.o usb_ohci.o usbdev.o \
440spe_pcie.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index ae245910872..82ae4434b0b 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -314,7 +314,7 @@ cpu_init_f (void)
#endif
#if defined (CFG_EBC_CFG)
- mtebc(epcr, CFG_EBC_CFG);
+ mtebc(EBC0_CFG, CFG_EBC_CFG);
#endif
#if defined(CONFIG_WATCHDOG)
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index 7db1cd8046b..0b056a15de2 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -1,91 +1,100 @@
-/*****************************************************************************/
-/* I2C Bus interface initialisation and I2C Commands */
-/* for PPC405GP */
-/* Author : AS HARNOIS */
-/* Date : 13.Dec.00 */
-/*****************************************************************************/
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * based on work by Anne Sophie Harnois <anne-sophie.harnois@nextream.fr>
+ *
+ * (C) Copyright 2001
+ * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
#include <common.h>
#include <ppc4xx.h>
-#if defined(CONFIG_440)
-# include <440_i2c.h>
-#else
-# include <405gp_i2c.h>
-#endif
+#include <4xx_i2c.h>
#include <i2c.h>
+#include <asm-ppc/io.h>
#ifdef CONFIG_HARD_I2C
DECLARE_GLOBAL_DATA_PTR;
-#define IIC_OK 0
-#define IIC_NOK 1
-#define IIC_NOK_LA 2 /* Lost arbitration */
-#define IIC_NOK_ICT 3 /* Incomplete transfer */
-#define IIC_NOK_XFRA 4 /* Transfer aborted */
-#define IIC_NOK_DATA 5 /* No data in buffer */
-#define IIC_NOK_TOUT 6 /* Transfer timeout */
-
-#define IIC_TIMEOUT 1 /* 1 seconde */
-
+#if defined(CONFIG_I2C_MULTI_BUS)
+/* Initialize the bus pointer to whatever one the SPD EEPROM is on.
+ * Default is bus 0. This is necessary because the DDR initialization
+ * runs from ROM, and we can't switch buses because we can't modify
+ * the global variables.
+ */
+#ifdef CFG_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#else
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
+#endif
+#endif /* CONFIG_I2C_MULTI_BUS */
-static void _i2c_bus_reset (void)
+static void _i2c_bus_reset(void)
{
- int i, status;
+ int i;
+ u8 dc;
/* Reset status register */
/* write 1 in SCMP and IRQA to clear these fields */
- out8 (IIC_STS, 0x0A);
+ out_8((u8 *)IIC_STS, 0x0A);
/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
- out8 (IIC_EXTSTS, 0x8F);
- __asm__ volatile ("eieio");
-
- /*
- * Get current state, reset bus
- * only if no transfers are pending.
- */
- i = 10;
- do {
- /* Get status */
- status = in8 (IIC_STS);
- udelay (500); /* 500us */
- i--;
- } while ((status & IIC_STS_PT) && (i > 0));
- /* Soft reset controller */
- status = in8 (IIC_XTCNTLSS);
- out8 (IIC_XTCNTLSS, (status | IIC_XTCNTLSS_SRST));
- __asm__ volatile ("eieio");
-
- /* make sure where in initial state, data hi, clock hi */
- out8 (IIC_DIRECTCNTL, 0xC);
- for (i = 0; i < 10; i++) {
- if ((in8 (IIC_DIRECTCNTL) & 0x3) != 0x3) {
- /* clock until we get to known state */
- out8 (IIC_DIRECTCNTL, 0x8); /* clock lo */
- udelay (100); /* 100us */
- out8 (IIC_DIRECTCNTL, 0xC); /* clock hi */
- udelay (100); /* 100us */
- } else {
- break;
+ out_8((u8 *)IIC_EXTSTS, 0x8F);
+
+ /* Place chip in the reset state */
+ out_8((u8 *)IIC_XTCNTLSS, IIC_XTCNTLSS_SRST);
+
+ /* Check if bus is free */
+ dc = in_8((u8 *)IIC_DIRECTCNTL);
+ if (!DIRCTNL_FREE(dc)){
+ /* Try to set bus free state */
+ out_8((u8 *)IIC_DIRECTCNTL, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC);
+
+ /* Wait until we regain bus control */
+ for (i = 0; i < 100; ++i) {
+ dc = in_8((u8 *)IIC_DIRECTCNTL);
+ if (DIRCTNL_FREE(dc))
+ break;
+
+ /* Toggle SCL line */
+ dc ^= IIC_DIRCNTL_SCC;
+ out_8((u8 *)IIC_DIRECTCNTL, dc);
+ udelay(10);
+ dc ^= IIC_DIRCNTL_SCC;
+ out_8((u8 *)IIC_DIRECTCNTL, dc);
}
}
- /* send start condition */
- out8 (IIC_DIRECTCNTL, 0x4);
- udelay (1000); /* 1ms */
- /* send stop condition */
- out8 (IIC_DIRECTCNTL, 0xC);
- udelay (1000); /* 1ms */
- /* Unreset controller */
- out8 (IIC_XTCNTLSS, (status & ~IIC_XTCNTLSS_SRST));
- udelay (1000); /* 1ms */
+
+ /* Remove reset */
+ out_8((u8 *)IIC_XTCNTLSS, 0);
}
-void i2c_init (int speed, int slaveadd)
+void i2c_init(int speed, int slaveadd)
{
sys_info_t sysInfo;
unsigned long freqOPB;
int val, divisor;
+ int bus;
#ifdef CFG_I2C_INIT_BOARD
/* call board specific i2c bus reset routine before accessing the */
@@ -94,101 +103,100 @@ void i2c_init (int speed, int slaveadd)
i2c_init_board();
#endif
- /* Handle possible failed I2C state */
- /* FIXME: put this into i2c_init_board()? */
- _i2c_bus_reset ();
+ for (bus = 0; bus < CFG_MAX_I2C_BUS; bus++) {
+ I2C_SET_BUS(bus);
- /* clear lo master address */
- out8 (IIC_LMADR, 0);
+ /* Handle possible failed I2C state */
+ /* FIXME: put this into i2c_init_board()? */
+ _i2c_bus_reset();
- /* clear hi master address */
- out8 (IIC_HMADR, 0);
+ /* clear lo master address */
+ out_8((u8 *)IIC_LMADR, 0);
- /* clear lo slave address */
- out8 (IIC_LSADR, 0);
+ /* clear hi master address */
+ out_8((u8 *)IIC_HMADR, 0);
- /* clear hi slave address */
- out8 (IIC_HSADR, 0);
+ /* clear lo slave address */
+ out_8((u8 *)IIC_LSADR, 0);
- /* Clock divide Register */
- /* get OPB frequency */
- get_sys_info (&sysInfo);
- freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
- /* set divisor according to freqOPB */
- divisor = (freqOPB - 1) / 10000000;
- if (divisor == 0)
- divisor = 1;
- out8 (IIC_CLKDIV, divisor);
+ /* clear hi slave address */
+ out_8((u8 *)IIC_HSADR, 0);
- /* no interrupts */
- out8 (IIC_INTRMSK, 0);
+ /* Clock divide Register */
+ /* get OPB frequency */
+ get_sys_info(&sysInfo);
+ freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
+ /* set divisor according to freqOPB */
+ divisor = (freqOPB - 1) / 10000000;
+ if (divisor == 0)
+ divisor = 1;
+ out_8((u8 *)IIC_CLKDIV, divisor);
- /* clear transfer count */
- out8 (IIC_XFRCNT, 0);
+ /* no interrupts */
+ out_8((u8 *)IIC_INTRMSK, 0);
- /* clear extended control & stat */
- /* write 1 in SRC SRS SWC SWS to clear these fields */
- out8 (IIC_XTCNTLSS, 0xF0);
+ /* clear transfer count */
+ out_8((u8 *)IIC_XFRCNT, 0);
- /* Mode Control Register
- Flush Slave/Master data buffer */
- out8 (IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
- __asm__ volatile ("eieio");
+ /* clear extended control & stat */
+ /* write 1 in SRC SRS SWC SWS to clear these fields */
+ out_8((u8 *)IIC_XTCNTLSS, 0xF0);
+ /* Mode Control Register
+ Flush Slave/Master data buffer */
+ out_8((u8 *)IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
- val = in8(IIC_MDCNTL);
- __asm__ volatile ("eieio");
+ val = in_8((u8 *)IIC_MDCNTL);
- /* Ignore General Call, slave transfers are ignored,
- disable interrupts, exit unknown bus state, enable hold
- SCL
- 100kHz normaly or FastMode for 400kHz and above
- */
+ /* Ignore General Call, slave transfers are ignored,
+ * disable interrupts, exit unknown bus state, enable hold
+ * SCL 100kHz normaly or FastMode for 400kHz and above
+ */
- val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
- if( speed >= 400000 ){
- val |= IIC_MDCNTL_FSM;
- }
- out8 (IIC_MDCNTL, val);
+ val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
+ if (speed >= 400000)
+ val |= IIC_MDCNTL_FSM;
+ out_8((u8 *)IIC_MDCNTL, val);
- /* clear control reg */
- out8 (IIC_CNTL, 0x00);
- __asm__ volatile ("eieio");
+ /* clear control reg */
+ out_8((u8 *)IIC_CNTL, 0x00);
+ }
+ /* set to SPD bus as default bus upon powerup */
+ I2C_SET_BUS(CFG_SPD_BUS_NUM);
}
/*
- This code tries to use the features of the 405GP i2c
- controller. It will transfer up to 4 bytes in one pass
- on the loop. It only does out8(lbz) to the buffer when it
- is possible to do out16(lhz) transfers.
-
- cmd_type is 0 for write 1 for read.
-
- addr_len can take any value from 0-255, it is only limited
- by the char, we could make it larger if needed. If it is
- 0 we skip the address write cycle.
-
- Typical case is a Write of an addr followd by a Read. The
- IBM FAQ does not cover this. On the last byte of the write
- we don't set the creg CHT bit, and on the first bytes of the
- read we set the RPST bit.
-
- It does not support address only transfers, there must be
- a data part. If you want to write the address yourself, put
- it in the data pointer.
-
- It does not support transfer to/from address 0.
-
- It does not check XFRCNT.
-*/
-static
-int i2c_transfer(unsigned char cmd_type,
- unsigned char chip,
- unsigned char addr[],
- unsigned char addr_len,
- unsigned char data[],
- unsigned short data_len )
+ * This code tries to use the features of the 405GP i2c
+ * controller. It will transfer up to 4 bytes in one pass
+ * on the loop. It only does out_8((u8 *)lbz) to the buffer when it
+ * is possible to do out16(lhz) transfers.
+ *
+ * cmd_type is 0 for write 1 for read.
+ *
+ * addr_len can take any value from 0-255, it is only limited
+ * by the char, we could make it larger if needed. If it is
+ * 0 we skip the address write cycle.
+ *
+ * Typical case is a Write of an addr followd by a Read. The
+ * IBM FAQ does not cover this. On the last byte of the write
+ * we don't set the creg CHT bit, and on the first bytes of the
+ * read we set the RPST bit.
+ *
+ * It does not support address only transfers, there must be
+ * a data part. If you want to write the address yourself, put
+ * it in the data pointer.
+ *
+ * It does not support transfer to/from address 0.
+ *
+ * It does not check XFRCNT.
+ */
+static int i2c_transfer(unsigned char cmd_type,
+ unsigned char chip,
+ unsigned char addr[],
+ unsigned char addr_len,
+ unsigned char data[],
+ unsigned short data_len)
{
unsigned char* ptr;
int reading;
@@ -198,97 +206,88 @@ int i2c_transfer(unsigned char cmd_type,
int i;
uchar creg;
- if( data == 0 || data_len == 0 ){
- /*Don't support data transfer of no length or to address 0*/
+ if (data == 0 || data_len == 0) {
+ /* Don't support data transfer of no length or to address 0 */
printf( "i2c_transfer: bad call\n" );
return IIC_NOK;
}
- if( addr && addr_len ){
+ if (addr && addr_len) {
ptr = addr;
cnt = addr_len;
reading = 0;
- }else{
+ } else {
ptr = data;
cnt = data_len;
reading = cmd_type;
}
- /*Clear Stop Complete Bit*/
- out8(IIC_STS,IIC_STS_SCMP);
+ /* Clear Stop Complete Bit */
+ out_8((u8 *)IIC_STS, IIC_STS_SCMP);
/* Check init */
- i=10;
+ i = 10;
do {
/* Get status */
- status = in8(IIC_STS);
- __asm__ volatile("eieio");
+ status = in_8((u8 *)IIC_STS);
i--;
- } while ((status & IIC_STS_PT) && (i>0));
+ } while ((status & IIC_STS_PT) && (i > 0));
if (status & IIC_STS_PT) {
result = IIC_NOK_TOUT;
return(result);
}
- /*flush the Master/Slave Databuffers*/
- out8(IIC_MDCNTL, ((in8(IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
- /*need to wait 4 OPB clocks? code below should take that long*/
+ /* flush the Master/Slave Databuffers */
+ out_8((u8 *)IIC_MDCNTL, ((in_8((u8 *)IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
+ /* need to wait 4 OPB clocks? code below should take that long */
/* 7-bit adressing */
- out8(IIC_HMADR,0);
- out8(IIC_LMADR, chip);
- __asm__ volatile("eieio");
+ out_8((u8 *)IIC_HMADR, 0);
+ out_8((u8 *)IIC_LMADR, chip);
tran = 0;
result = IIC_OK;
creg = 0;
- while ( tran != cnt && (result == IIC_OK)) {
+ while (tran != cnt && (result == IIC_OK)) {
int bc,j;
/* Control register =
- Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
- Transfer is a sequence of transfers
- */
+ * Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
+ * Transfer is a sequence of transfers
+ */
creg |= IIC_CNTL_PT;
- bc = (cnt - tran) > 4 ? 4 :
- cnt - tran;
- creg |= (bc-1)<<4;
- /* if the real cmd type is write continue trans*/
- if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
+ bc = (cnt - tran) > 4 ? 4 : cnt - tran;
+ creg |= (bc - 1) << 4;
+ /* if the real cmd type is write continue trans */
+ if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt))
creg |= IIC_CNTL_CHT;
if (reading)
creg |= IIC_CNTL_READ;
- else {
- for(j=0; j<bc; j++) {
+ else
+ for(j=0; j < bc; j++)
/* Set buffer */
- out8(IIC_MDBUF,ptr[tran+j]);
- __asm__ volatile("eieio");
- }
- }
- out8(IIC_CNTL, creg );
- __asm__ volatile("eieio");
+ out_8((u8 *)IIC_MDBUF, ptr[tran+j]);
+ out_8((u8 *)IIC_CNTL, creg);
/* Transfer is in progress
- we have to wait for upto 5 bytes of data
- 1 byte chip address+r/w bit then bc bytes
- of data.
- udelay(10) is 1 bit time at 100khz
- Doubled for slop. 20 is too small.
- */
- i=2*5*8;
+ * we have to wait for upto 5 bytes of data
+ * 1 byte chip address+r/w bit then bc bytes
+ * of data.
+ * udelay(10) is 1 bit time at 100khz
+ * Doubled for slop. 20 is too small.
+ */
+ i = 2*5*8;
do {
/* Get status */
- status = in8(IIC_STS);
- __asm__ volatile("eieio");
- udelay (10);
+ status = in_8((u8 *)IIC_STS);
+ udelay(10);
i--;
- } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
- && (i>0));
+ } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && (i > 0));
if (status & IIC_STS_ERR) {
result = IIC_NOK;
- status = in8 (IIC_EXTSTS);
+ status = in_8((u8 *)IIC_EXTSTS);
/* Lost arbitration? */
if (status & IIC_EXTSTS_LA)
result = IIC_NOK_LA;
@@ -306,34 +305,32 @@ int i2c_transfer(unsigned char cmd_type,
/* Are there data in buffer */
if (status & IIC_STS_MDBS) {
/*
- even if we have data we have to wait 4OPB clocks
- for it to hit the front of the FIFO, after that
- we can just read. We should check XFCNT here and
- if the FIFO is full there is no need to wait.
- */
- udelay (1);
- for(j=0;j<bc;j++) {
- ptr[tran+j] = in8(IIC_MDBUF);
- __asm__ volatile("eieio");
- }
+ * even if we have data we have to wait 4OPB clocks
+ * for it to hit the front of the FIFO, after that
+ * we can just read. We should check XFCNT here and
+ * if the FIFO is full there is no need to wait.
+ */
+ udelay(1);
+ for (j=0; j<bc; j++)
+ ptr[tran+j] = in_8((u8 *)IIC_MDBUF);
} else
result = IIC_NOK_DATA;
}
creg = 0;
- tran+=bc;
- if( ptr == addr && tran == cnt ) {
+ tran += bc;
+ if (ptr == addr && tran == cnt) {
ptr = data;
cnt = data_len;
tran = 0;
reading = cmd_type;
- if( reading )
+ if (reading)
creg = IIC_CNTL_RPST;
}
}
return (result);
}
-int i2c_probe (uchar chip)
+int i2c_probe(uchar chip)
{
uchar buf[1];
@@ -344,21 +341,21 @@ int i2c_probe (uchar chip)
* address was <ACK>ed (i.e. there was a chip at that address which
* drove the data line low).
*/
- return(i2c_transfer (1, chip << 1, 0,0, buf, 1) != 0);
+ return (i2c_transfer(1, chip << 1, 0,0, buf, 1) != 0);
}
-int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
{
uchar xaddr[4];
int ret;
- if ( alen > 4 ) {
+ if (alen > 4) {
printf ("I2C read: addr len %d not supported\n", alen);
return 1;
}
- if ( alen > 0 ) {
+ if (alen > 0) {
xaddr[0] = (addr >> 24) & 0xFF;
xaddr[1] = (addr >> 16) & 0xFF;
xaddr[2] = (addr >> 8) & 0xFF;
@@ -378,10 +375,10 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
* still be one byte because the extra address bits are
* hidden in the chip address.
*/
- if( alen > 0 )
+ if (alen > 0)
chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- if( (ret = i2c_transfer( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
+ if ((ret = i2c_transfer(1, chip<<1, &xaddr[4-alen], alen, buffer, len)) != 0) {
if (gd->have_console)
printf( "I2c read: failed %d\n", ret);
return 1;
@@ -389,16 +386,17 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len)
return 0;
}
-int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
+int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
{
uchar xaddr[4];
- if ( alen > 4 ) {
+ if (alen > 4) {
printf ("I2C write: addr len %d not supported\n", alen);
return 1;
}
- if ( alen > 0 ) {
+
+ if (alen > 0) {
xaddr[0] = (addr >> 24) & 0xFF;
xaddr[1] = (addr >> 16) & 0xFF;
xaddr[2] = (addr >> 8) & 0xFF;
@@ -417,11 +415,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
* still be one byte because the extra address bits are
* hidden in the chip address.
*/
- if( alen > 0 )
+ if (alen > 0)
chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
#endif
- return (i2c_transfer( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
+ return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
}
/*-----------------------------------------------------------------------
@@ -433,7 +431,7 @@ uchar i2c_reg_read(uchar i2c_addr, uchar reg)
i2c_read(i2c_addr, reg, 1, &buf, 1);
- return(buf);
+ return (buf);
}
/*-----------------------------------------------------------------------
@@ -443,4 +441,38 @@ void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val)
{
i2c_write(i2c_addr, reg, 1, &val, 1);
}
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+/*
+ * Functions for multiple I2C bus handling
+ */
+unsigned int i2c_get_bus_num(void)
+{
+ return i2c_bus_num;
+}
+
+int i2c_set_bus_num(unsigned int bus)
+{
+ if (bus >= CFG_MAX_I2C_BUS)
+ return -1;
+
+ i2c_bus_num = bus;
+
+ return 0;
+}
+
+/* TODO: add 100/400k switching */
+unsigned int i2c_get_bus_speed(void)
+{
+ return CFG_I2C_SPEED;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+ if (speed != CFG_I2C_SPEED)
+ return -1;
+
+ return 0;
+}
+#endif /* CONFIG_I2C_MULTI_BUS */
#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 2d16a83420a..06220c34394 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -331,7 +331,7 @@ void get_sys_info (sys_info_t * sysInfo)
unsigned long m;
unsigned long prbdv0;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
unsigned long sys_freq;
unsigned long sys_per=0;
unsigned long msr;
@@ -348,7 +348,7 @@ void get_sys_info (sys_info_t * sysInfo)
/*-------------------------------------------------------------------------+
| Calculate the system clock speed from the period.
+-------------------------------------------------------------------------*/
- sys_freq=(ONE_BILLION/sys_per)*1000;
+ sys_freq = (ONE_BILLION / sys_per) * 1000;
#endif
/* Extract configured divisors */
@@ -385,17 +385,17 @@ void get_sys_info (sys_info_t * sysInfo)
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
sysInfo->freqVCOMhz = (m * sys_freq) ;
#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+ sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
#endif
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
/* Determine PCI Clock Period */
pci_clock_per = determine_pci_clock_per();
sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
@@ -408,7 +408,7 @@ void get_sys_info (sys_info_t * sysInfo)
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_YUCCA)
unsigned long determine_sysper(void)
{
unsigned int fpga_clocking_reg;
@@ -583,7 +583,6 @@ unsigned long determine_sysper(void)
}
return(sys_per);
-
}
/*-------------------------------------------------------------------------+
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8e000d30924..200f7b31adf 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1856,3 +1856,60 @@ pll_wait:
/* execution will continue from the poweron */
/* vector of 0xfffffffc */
#endif /* CONFIG_405EP */
+
+#if defined(CONFIG_440)
+#define function_prolog(func_name) .text; \
+ .align 2; \
+ .globl func_name; \
+ func_name:
+#define function_epilog(func_name) .type func_name,@function; \
+ .size func_name,.-func_name
+
+/*----------------------------------------------------------------------------+
+| mttlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb3)
+ TLBWE(4,3,2)
+ blr
+ function_epilog(mttlb3)
+
+/*----------------------------------------------------------------------------+
+| mftlb3.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb3)
+ TLBRE(3,3,2)
+ blr
+ function_epilog(mftlb3)
+
+/*----------------------------------------------------------------------------+
+| mttlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb2)
+ TLBWE(4,3,1)
+ blr
+ function_epilog(mttlb2)
+
+/*----------------------------------------------------------------------------+
+| mftlb2.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb2)
+ TLBRE(3,3,1)
+ blr
+ function_epilog(mftlb2)
+
+/*----------------------------------------------------------------------------+
+| mttlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mttlb1)
+ TLBWE(4,3,0)
+ blr
+ function_epilog(mttlb1)
+
+/*----------------------------------------------------------------------------+
+| mftlb1.
++----------------------------------------------------------------------------*/
+ function_prolog(mftlb1)
+ TLBRE(3,3,0)
+ blr
+ function_epilog(mftlb1)
+#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
new file mode 100644
index 00000000000..e26e6d40207
--- /dev/null
+++ b/cpu/ppc4xx/tlb.c
@@ -0,0 +1,184 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_440)
+
+#include <ppc4xx.h>
+#include <ppc440.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+
+typedef struct region {
+ unsigned long base;
+ unsigned long size;
+ unsigned long tlb_word2_i_value;
+} region_t;
+
+static int add_tlb_entry(unsigned long base_addr,
+ unsigned long tlb_word0_size_value,
+ unsigned long tlb_word2_i_value)
+{
+ int i;
+ unsigned long tlb_word0_value;
+ unsigned long tlb_word1_value;
+ unsigned long tlb_word2_value;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
+ break;
+ }
+ if (i >= PPC4XX_TLB_SIZE)
+ return -1;
+
+ /* Second, create the TLB entry */
+ tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE |
+ TLB_WORD0_TS_0 | tlb_word0_size_value;
+ tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0);
+ tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
+ TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
+ TLB_WORD2_W_DISABLE | tlb_word2_i_value |
+ TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
+ TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
+ TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
+ TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
+ TLB_WORD2_SR_ENABLE;
+
+ /* Wait for all memory accesses to complete */
+ sync();
+
+ /* Third, add the TLB entries */
+ mttlb1(i, tlb_word0_value);
+ mttlb2(i, tlb_word1_value);
+ mttlb3(i, tlb_word2_value);
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+
+ return 0;
+}
+
+static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size,
+ unsigned long tlb_word2_i_value)
+{
+ int rc;
+ int tlb_i;
+
+ tlb_i = tlb_word2_i_value;
+ while (mem_size != 0) {
+ rc = 0;
+ /* Add the TLB entries in to map the region. */
+ if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_256MB_SIZE)) {
+ /* Add a 256MB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
+ mem_size -= TLB_256MB_SIZE;
+ base_addr += TLB_256MB_SIZE;
+ }
+ } else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_16MB_SIZE)) {
+ /* Add a 16MB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
+ mem_size -= TLB_16MB_SIZE;
+ base_addr += TLB_16MB_SIZE;
+ }
+ } else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_1MB_SIZE)) {
+ /* Add a 1MB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
+ mem_size -= TLB_1MB_SIZE;
+ base_addr += TLB_1MB_SIZE;
+ }
+ } else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_256KB_SIZE)) {
+ /* Add a 256KB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
+ mem_size -= TLB_256KB_SIZE;
+ base_addr += TLB_256KB_SIZE;
+ }
+ } else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_64KB_SIZE)) {
+ /* Add a 64KB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
+ mem_size -= TLB_64KB_SIZE;
+ base_addr += TLB_64KB_SIZE;
+ }
+ } else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_16KB_SIZE)) {
+ /* Add a 16KB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
+ mem_size -= TLB_16KB_SIZE;
+ base_addr += TLB_16KB_SIZE;
+ }
+ } else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_4KB_SIZE)) {
+ /* Add a 4KB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
+ mem_size -= TLB_4KB_SIZE;
+ base_addr += TLB_4KB_SIZE;
+ }
+ } else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) &&
+ (mem_size >= TLB_1KB_SIZE)) {
+ /* Add a 1KB TLB entry */
+ if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
+ mem_size -= TLB_1KB_SIZE;
+ base_addr += TLB_1KB_SIZE;
+ }
+ } else {
+ printf("ERROR: no TLB size exists for the base address 0x%0X.\n",
+ base_addr);
+ }
+
+ if (rc != 0)
+ printf("ERROR: no TLB entries available for the base addr 0x%0X.\n",
+ base_addr);
+ }
+
+ return;
+}
+
+/*
+ * Program one (or multiple) TLB entries for one memory region
+ *
+ * Common usage for boards with SDRAM DIMM modules to dynamically
+ * configure the TLB's for the SDRAM
+ */
+void program_tlb(u32 start, u32 size)
+{
+ region_t region_array;
+
+ region_array.base = start;
+ region_array.size = size;
+ region_array.tlb_word2_i_value = TLB_WORD2_I_ENABLE; /* disable cache (for now) */
+
+ /* Call the routine to add in the tlb entries for the memory regions */
+ program_tlb_addr(region_array.base, region_array.size,
+ region_array.tlb_word2_i_value);
+
+ return;
+}
+
+#endif /* CONFIG_440 */
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index f7020eec951..0fbaa162fa0 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -37,7 +37,7 @@ static block_dev_desc_t mmc_dev;
block_dev_desc_t * mmc_get_dev(int dev)
{
- return ((block_dev_desc_t *)&mmc_dev);
+ return (dev == 0) ? &mmc_dev : NULL;
}
/*
@@ -363,7 +363,7 @@ mmc_write(uchar *src, ulong dst, int size)
ulong
/****************************************************/
-mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
+mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst)
/****************************************************/
{
int mmc_block_size = MMC_BLOCK_SIZE;
diff --git a/disk/part.c b/disk/part.c
index 2255e726cf5..9e8bd4fb889 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <command.h>
#include <ide.h>
+#include <part.h>
#undef PART_DEBUG
@@ -39,6 +40,58 @@
defined(CONFIG_MMC) || \
defined(CONFIG_SYSTEMACE) )
+struct block_drvr {
+ char *name;
+ block_dev_desc_t* (*get_dev)(int dev);
+};
+
+static const struct block_drvr block_drvr[] = {
+#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+ { .name = "ide", .get_dev = ide_get_dev, },
+#endif
+#if (CONFIG_COMMANDS & CFG_CMD_SCSI)
+ { .name = "scsi", .get_dev = scsi_get_dev, },
+#endif
+#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE))
+ { .name = "usb", .get_dev = usb_stor_get_dev, },
+#endif
+#if defined(CONFIG_MMC)
+ { .name = "mmc", .get_dev = mmc_get_dev, },
+#endif
+#if defined(CONFIG_SYSTEMACE)
+ { .name = "ace", .get_dev = systemace_get_dev, },
+#endif
+ { },
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+block_dev_desc_t *get_dev(char* ifname, int dev)
+{
+ const struct block_drvr *drvr = block_drvr;
+ block_dev_desc_t* (*reloc_get_dev)(int dev);
+
+ while (drvr->name) {
+ reloc_get_dev = drvr->get_dev + gd->reloc_off;
+ if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0)
+ return reloc_get_dev(dev);
+ drvr++;
+ }
+ return NULL;
+}
+#else
+block_dev_desc_t *get_dev(char* ifname, int dev)
+{
+ return NULL;
+}
+#endif
+
+#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
+ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
+ (CONFIG_COMMANDS & CFG_CMD_USB) || \
+ defined(CONFIG_MMC) || \
+ defined(CONFIG_SYSTEMACE) )
+
/* ------------------------------------------------------------------------- */
/*
* reports device info to the user
diff --git a/drivers/Makefile b/drivers/Makefile
index 6a3ea5da255..60ce3b489cc 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -44,7 +44,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \
serial.o serial_max3100.o \
serial_pl010.o serial_pl011.o serial_xuartlite.o \
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
- status_led.o sym53c8xx.o ahci.o \
+ status_led.o sym53c8xx.o systemace.o ahci.o \
ti_pci1410a.o tigon3.o tsec.o tsi108_eth.o\
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o \
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index 696f9a47ada..5579a1efc15 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -36,6 +36,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <asm/byteorder.h>
#include <environment.h>
#ifdef CFG_FLASH_CFI_DRIVER
@@ -931,27 +932,18 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.cp = cword.c;
-#ifdef CONFIG_BLACKFIN
- asm("ssync;");
-#endif
break;
case FLASH_CFI_16BIT:
debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
cmd, cword.w,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.wp = cword.w;
-#ifdef CONFIG_BLACKFIN
- asm("ssync;");
-#endif
break;
case FLASH_CFI_32BIT:
debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
cmd, cword.l,
info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
*addr.lp = cword.l;
-#ifdef CONFIG_BLACKFIN
- asm("ssync;");
-#endif
break;
case FLASH_CFI_64BIT:
#ifdef DEBUG
@@ -966,11 +958,11 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
}
#endif
*addr.llp = cword.ll;
-#ifdef CONFIG_BLACKFIN
- asm("ssync;");
-#endif
break;
}
+
+ /* Ensure all the instructions are fully finished */
+ sync();
}
static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
diff --git a/drivers/systemace.c b/drivers/systemace.c
new file mode 100644
index 00000000000..3848d9c59c2
--- /dev/null
+++ b/drivers/systemace.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ * Stephen Williams (XXXXXXXXXXXXXXXX)
+ *
+ * This source code is free software; you can redistribute it
+ * and/or modify it in source code form under the terms of the GNU
+ * General Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+/*
+ * The Xilinx SystemACE chip support is activated by defining
+ * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * to set the base address of the device. This code currently
+ * assumes that the chip is connected via a byte-wide bus.
+ *
+ * The CONFIG_SYSTEMACE also adds to fat support the device class
+ * "ace" that allows the user to execute "fatls ace 0" and the
+ * like. This works by making the systemace_get_dev function
+ * available to cmd_fat.c:get_dev and filling in a block device
+ * description that has all the bits needed for FAT support to
+ * read sectors.
+ *
+ * According to Xilinx technical support, before accessing the
+ * SystemACE CF you need to set the following control bits:
+ * FORCECFGMODE : 1
+ * CFGMODE : 0
+ * CFGSTART : 0
+ */
+
+#include <common.h>
+#include <command.h>
+#include <systemace.h>
+#include <part.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_SYSTEMACE
+
+/*
+ * The ace_readw and writew functions read/write 16bit words, but the
+ * offset value is the BYTE offset as most used in the Xilinx
+ * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * to be the base address for the chip, usually in the local
+ * peripheral bus.
+ */
+#if (CFG_SYSTEMACE_WIDTH == 8)
+#if !defined(__BIG_ENDIAN)
+#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
+ (readb(CFG_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
+ writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#else
+#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
+ (readb(CFG_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
+ writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#endif
+#else
+#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#endif
+
+/* */
+
+static unsigned long systemace_read(int dev, unsigned long start,
+ unsigned long blkcnt, void *buffer);
+
+static block_dev_desc_t systemace_dev = { 0 };
+
+static int get_cf_lock(void)
+{
+ int retry = 10;
+
+ /* CONTROLREG = LOCKREG */
+ unsigned val = ace_readw(0x18);
+ val |= 0x0002;
+ ace_writew((val & 0xffff), 0x18);
+
+ /* Wait for MPULOCK in STATUSREG[15:0] */
+ while (!(ace_readw(0x04) & 0x0002)) {
+
+ if (retry < 0)
+ return -1;
+
+ udelay(100000);
+ retry -= 1;
+ }
+
+ return 0;
+}
+
+static void release_cf_lock(void)
+{
+ unsigned val = ace_readw(0x18);
+ val &= ~(0x0002);
+ ace_writew((val & 0xffff), 0x18);
+}
+
+block_dev_desc_t *systemace_get_dev(int dev)
+{
+ /* The first time through this, the systemace_dev object is
+ not yet initialized. In that case, fill it in. */
+ if (systemace_dev.blksz == 0) {
+ systemace_dev.if_type = IF_TYPE_UNKNOWN;
+ systemace_dev.dev = 0;
+ systemace_dev.part_type = PART_TYPE_UNKNOWN;
+ systemace_dev.type = DEV_TYPE_HARDDISK;
+ systemace_dev.blksz = 512;
+ systemace_dev.removable = 1;
+ systemace_dev.block_read = systemace_read;
+
+ /*
+ * Ensure the correct bus mode (8/16 bits) gets enabled
+ */
+ ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+
+ init_part(&systemace_dev);
+
+ }
+
+ return &systemace_dev;
+}
+
+/*
+ * This function is called (by dereferencing the block_read pointer in
+ * the dev_desc) to read blocks of data. The return value is the
+ * number of blocks read. A zero return indicates an error.
+ */
+static unsigned long systemace_read(int dev, unsigned long start,
+ unsigned long blkcnt, void *buffer)
+{
+ int retry;
+ unsigned blk_countdown;
+ unsigned char *dp = buffer;
+ unsigned val;
+
+ if (get_cf_lock() < 0) {
+ unsigned status = ace_readw(0x04);
+
+ /* If CFDETECT is false, card is missing. */
+ if (!(status & 0x0010)) {
+ printf("** CompactFlash card not present. **\n");
+ return 0;
+ }
+
+ printf("**** ACE locked away from me (STATUSREG=%04x)\n",
+ status);
+ return 0;
+ }
+#ifdef DEBUG_SYSTEMACE
+ printf("... systemace read %lu sectors at %lu\n", blkcnt, start);
+#endif
+
+ retry = 2000;
+ for (;;) {
+ val = ace_readw(0x04);
+
+ /* If CFDETECT is false, card is missing. */
+ if (!(val & 0x0010)) {
+ printf("**** ACE CompactFlash not found.\n");
+ release_cf_lock();
+ return 0;
+ }
+
+ /* If RDYFORCMD, then we are ready to go. */
+ if (val & 0x0100)
+ break;
+
+ if (retry < 0) {
+ printf("**** SystemACE not ready.\n");
+ release_cf_lock();
+ return 0;
+ }
+
+ udelay(1000);
+ retry -= 1;
+ }
+
+ /* The SystemACE can only transfer 256 sectors at a time, so
+ limit the current chunk of sectors. The blk_countdown
+ variable is the number of sectors left to transfer. */
+
+ blk_countdown = blkcnt;
+ while (blk_countdown > 0) {
+ unsigned trans = blk_countdown;
+
+ if (trans > 256)
+ trans = 256;
+
+#ifdef DEBUG_SYSTEMACE
+ printf("... transfer %lu sector in a chunk\n", trans);
+#endif
+ /* Write LBA block address */
+ ace_writew((start >> 0) & 0xffff, 0x10);
+ ace_writew((start >> 16) & 0x0fff, 0x12);
+
+ /* NOTE: in the Write Sector count below, a count of 0
+ causes a transfer of 256, so &0xff gives the right
+ value for whatever transfer count we want. */
+
+ /* Write sector count | ReadMemCardData. */
+ ace_writew((trans & 0xff) | 0x0300, 0x14);
+
+ /* Reset the configruation controller */
+ val = ace_readw(0x18);
+ val |= 0x0080;
+ ace_writew(val, 0x18);
+
+ retry = trans * 16;
+ while (retry > 0) {
+ int idx;
+
+ /* Wait for buffer to become ready. */
+ while (!(ace_readw(0x04) & 0x0020)) {
+ udelay(100);
+ }
+
+ /* Read 16 words of 2bytes from the sector buffer. */
+ for (idx = 0; idx < 16; idx += 1) {
+ unsigned short val = ace_readw(0x40);
+ *dp++ = val & 0xff;
+ *dp++ = (val >> 8) & 0xff;
+ }
+
+ retry -= 1;
+ }
+
+ /* Clear the configruation controller reset */
+ val = ace_readw(0x18);
+ val &= ~0x0080;
+ ace_writew(val, 0x18);
+
+ /* Count the blocks we transfer this time. */
+ start += trans;
+ blk_countdown -= trans;
+ }
+
+ release_cf_lock();
+
+ return blkcnt;
+}
+#endif /* CONFIG_SYSTEMACE */
diff --git a/dtt/adm1021.c b/dtt/adm1021.c
index 14c38f0a83d..9f65cfb2740 100644
--- a/dtt/adm1021.c
+++ b/dtt/adm1021.c
@@ -144,12 +144,15 @@ dtt_init (void)
unsigned char sensors[] = CONFIG_DTT_SENSORS;
const char *const header = "DTT: ";
+ /* switch to correct I2C bus */
+ I2C_SET_BUS(CFG_DTT_BUS_NUM);
+
for (i = 0; i < sizeof(sensors); i++) {
- if (_dtt_init(sensors[i]) != 0)
- printf ("%s%d FAILED INIT\n", header, i+1);
- else
- printf ("%s%d is %i C\n", header, i+1,
- dtt_get_temp(sensors[i]));
+ if (_dtt_init(sensors[i]) != 0)
+ printf ("%s%d FAILED INIT\n", header, i+1);
+ else
+ printf ("%s%d is %i C\n", header, i+1,
+ dtt_get_temp(sensors[i]));
}
return (0);
diff --git a/include/405gp_i2c.h b/include/405gp_i2c.h
deleted file mode 100644
index 5a9a4975367..00000000000
--- a/include/405gp_i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-#ifndef _405gp_i2c_h_
-#define _405gp_i2c_h_
-
-#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500
-#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
-#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
-#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
-#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
-#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
-#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
-#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS)
-#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
-#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
-#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
-#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
-#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
-#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
-#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
-#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
-
-/* MDCNTL Register Bit definition */
-#define IIC_MDCNTL_HSCL 0x01
-#define IIC_MDCNTL_EUBS 0x02
-#define IIC_MDCNTL_EINT 0x04
-#define IIC_MDCNTL_ESM 0x08
-#define IIC_MDCNTL_FSM 0x10
-#define IIC_MDCNTL_EGC 0x20
-#define IIC_MDCNTL_FMDB 0x40
-#define IIC_MDCNTL_FSDB 0x80
-
-/* CNTL Register Bit definition */
-#define IIC_CNTL_PT 0x01
-#define IIC_CNTL_READ 0x02
-#define IIC_CNTL_CHT 0x04
-#define IIC_CNTL_RPST 0x08
-/* bit 2/3 for Transfer count*/
-#define IIC_CNTL_AMD 0x40
-#define IIC_CNTL_HMT 0x80
-
-/* STS Register Bit definition */
-#define IIC_STS_PT 0X01
-#define IIC_STS_IRQA 0x02
-#define IIC_STS_ERR 0X04
-#define IIC_STS_SCMP 0x08
-#define IIC_STS_MDBF 0x10
-#define IIC_STS_MDBS 0X20
-#define IIC_STS_SLPR 0x40
-#define IIC_STS_SSS 0x80
-
-/* EXTSTS Register Bit definition */
-#define IIC_EXTSTS_XFRA 0X01
-#define IIC_EXTSTS_ICT 0X02
-#define IIC_EXTSTS_LA 0X04
-
-/* XTCNTLSS Register Bit definition */
-#define IIC_XTCNTLSS_SRST 0x01
-#define IIC_XTCNTLSS_EPI 0x02
-#define IIC_XTCNTLSS_SDBF 0x04
-#define IIC_XTCNTLSS_SBDD 0x08
-#define IIC_XTCNTLSS_SWS 0x10
-#define IIC_XTCNTLSS_SWC 0x20
-#define IIC_XTCNTLSS_SRS 0x40
-#define IIC_XTCNTLSS_SRC 0x80
-#endif
diff --git a/include/440_i2c.h b/include/440_i2c.h
deleted file mode 100644
index 0c2bf362730..00000000000
--- a/include/440_i2c.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _440_i2c_h_
-#define _440_i2c_h_
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
-#else
-#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
-#endif /*CONFIG_440EP CONFIG_440GR*/
-
-#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
-#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
-#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
-#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
-#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
-#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
-#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
-#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS)
-#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
-#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
-#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
-#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
-#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
-#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
-#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
-#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
-
-/* MDCNTL Register Bit definition */
-#define IIC_MDCNTL_HSCL 0x01
-#define IIC_MDCNTL_EUBS 0x02
-#define IIC_MDCNTL_EINT 0x04
-#define IIC_MDCNTL_ESM 0x08
-#define IIC_MDCNTL_FSM 0x10
-#define IIC_MDCNTL_EGC 0x20
-#define IIC_MDCNTL_FMDB 0x40
-#define IIC_MDCNTL_FSDB 0x80
-
-/* CNTL Register Bit definition */
-#define IIC_CNTL_PT 0x01
-#define IIC_CNTL_READ 0x02
-#define IIC_CNTL_CHT 0x04
-#define IIC_CNTL_RPST 0x08
-/* bit 2/3 for Transfer count*/
-#define IIC_CNTL_AMD 0x40
-#define IIC_CNTL_HMT 0x80
-
-/* STS Register Bit definition */
-#define IIC_STS_PT 0X01
-#define IIC_STS_IRQA 0x02
-#define IIC_STS_ERR 0X04
-#define IIC_STS_SCMP 0x08
-#define IIC_STS_MDBF 0x10
-#define IIC_STS_MDBS 0X20
-#define IIC_STS_SLPR 0x40
-#define IIC_STS_SSS 0x80
-
-/* EXTSTS Register Bit definition */
-#define IIC_EXTSTS_XFRA 0X01
-#define IIC_EXTSTS_ICT 0X02
-#define IIC_EXTSTS_LA 0X04
-
-/* XTCNTLSS Register Bit definition */
-#define IIC_XTCNTLSS_SRST 0x01
-#define IIC_XTCNTLSS_EPI 0x02
-#define IIC_XTCNTLSS_SDBF 0x04
-#define IIC_XTCNTLSS_SBDD 0x08
-#define IIC_XTCNTLSS_SWS 0x10
-#define IIC_XTCNTLSS_SWC 0x20
-#define IIC_XTCNTLSS_SRS 0x40
-#define IIC_XTCNTLSS_SRC 0x80
-#endif
diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h
new file mode 100644
index 00000000000..66b7997419b
--- /dev/null
+++ b/include/4xx_i2c.h
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _4xx_i2c_h_
+#define _4xx_i2c_h_
+
+#define IIC_OK 0
+#define IIC_NOK 1
+#define IIC_NOK_LA 2 /* Lost arbitration */
+#define IIC_NOK_ICT 3 /* Incomplete transfer */
+#define IIC_NOK_XFRA 4 /* Transfer aborted */
+#define IIC_NOK_DATA 5 /* No data in buffer */
+#define IIC_NOK_TOUT 6 /* Transfer timeout */
+
+#define IIC_TIMEOUT 1 /* 1 second */
+
+#if defined(CONFIG_I2C_MULTI_BUS)
+#define I2C_BUS_OFFS (i2c_bus_num * 0x100)
+#else
+#define I2C_BUS_OFFS (0x000)
+#endif /* CONFIG_I2C_MULTI_BUS */
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS)
+#elif defined(CONFIG_440)
+/* all remaining 440 variants */
+#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS)
+#else
+/* all 405 variants */
+#define I2C_BASE_ADDR (0xEF600500 + I2C_BUS_OFFS)
+#endif
+
+#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR
+#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
+#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
+#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
+#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
+#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
+#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
+#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS)
+#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
+#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
+#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
+#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV)
+#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
+#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
+#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
+#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
+
+/* MDCNTL Register Bit definition */
+#define IIC_MDCNTL_HSCL 0x01
+#define IIC_MDCNTL_EUBS 0x02
+#define IIC_MDCNTL_EINT 0x04
+#define IIC_MDCNTL_ESM 0x08
+#define IIC_MDCNTL_FSM 0x10
+#define IIC_MDCNTL_EGC 0x20
+#define IIC_MDCNTL_FMDB 0x40
+#define IIC_MDCNTL_FSDB 0x80
+
+/* CNTL Register Bit definition */
+#define IIC_CNTL_PT 0x01
+#define IIC_CNTL_READ 0x02
+#define IIC_CNTL_CHT 0x04
+#define IIC_CNTL_RPST 0x08
+/* bit 2/3 for Transfer count*/
+#define IIC_CNTL_AMD 0x40
+#define IIC_CNTL_HMT 0x80
+
+/* STS Register Bit definition */
+#define IIC_STS_PT 0x01
+#define IIC_STS_IRQA 0x02
+#define IIC_STS_ERR 0x04
+#define IIC_STS_SCMP 0x08
+#define IIC_STS_MDBF 0x10
+#define IIC_STS_MDBS 0x20
+#define IIC_STS_SLPR 0x40
+#define IIC_STS_SSS 0x80
+
+/* EXTSTS Register Bit definition */
+#define IIC_EXTSTS_XFRA 0x01
+#define IIC_EXTSTS_ICT 0x02
+#define IIC_EXTSTS_LA 0x04
+
+/* XTCNTLSS Register Bit definition */
+#define IIC_XTCNTLSS_SRST 0x01
+#define IIC_XTCNTLSS_EPI 0x02
+#define IIC_XTCNTLSS_SDBF 0x04
+#define IIC_XTCNTLSS_SBDD 0x08
+#define IIC_XTCNTLSS_SWS 0x10
+#define IIC_XTCNTLSS_SWC 0x20
+#define IIC_XTCNTLSS_SRS 0x40
+#define IIC_XTCNTLSS_SRC 0x80
+
+/* IICx_DIRECTCNTL register */
+#define IIC_DIRCNTL_SDAC 0x08
+#define IIC_DIRCNTL_SCC 0x04
+#define IIC_DIRCNTL_MSDA 0x02
+#define IIC_DIRCNTL_MSC 0x01
+
+#define DIRCTNL_FREE(v) (((v) & 0x0f) == 0x0f)
+#endif
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 648a10dd923..47c18e7e869 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -29,6 +29,10 @@
#include <asm/arch/hardware.h>
#endif /* XXX###XXX */
+static inline void sync(void)
+{
+}
+
/*
* Generic virtual read/write. Note that we don't support half-word
* read/writes. We define __arch_*[bl] here, and leave __arch_*w
diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h
index e86c456ae1e..3c0d569233e 100644
--- a/include/asm-avr32/io.h
+++ b/include/asm-avr32/io.h
@@ -89,4 +89,8 @@ static __inline__ void * phys_to_virt(unsigned long address)
#endif /* __KERNEL__ */
+static inline void sync(void)
+{
+}
+
#endif /* __ASM_AVR32_IO_H */
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index e5b388e262b..fc27194a42e 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -25,6 +25,11 @@
#ifndef _BLACKFIN_IO_H
#define _BLACKFIN_IO_H
+static inline void sync(void)
+{
+ __asm__ __volatile__ asm("ssync" : : : "memory");
+}
+
#ifdef __KERNEL__
#include <linux/config.h>
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index 85d44aaa15b..e64d788fa75 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -201,4 +201,8 @@ __OUTS(b)
__OUTS(w)
__OUTS(l)
+static inline void sync(void)
+{
+}
+
#endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index 79a9626b550..7bbdefba760 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -1 +1,8 @@
-/* */
+#ifndef __ASM_M68K_IO_H_
+#define __ASM_M68K_IO_H_
+
+static inline void sync(void)
+{
+}
+
+#endif /* __ASM_M68K_IO_H_ */
diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h
index 33590454cfd..1c77ade4f1a 100644
--- a/include/asm-microblaze/io.h
+++ b/include/asm-microblaze/io.h
@@ -125,4 +125,8 @@ io_outsl (unsigned long port, const void *src, unsigned long count)
#define ioremap_writethrough(physaddr, size) (physaddr)
#define ioremap_fullcache(physaddr, size) (physaddr)
+static inline void sync(void)
+{
+}
+
#endif /* __MICROBLAZE_IO_H__ */
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 857fb0302ce..cd4d5dc9d9e 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -447,4 +447,8 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
#define dma_cache_wback(start,size) _dma_cache_wback(start,size)
#define dma_cache_inv(start,size) _dma_cache_inv(start,size)
+static inline void sync(void)
+{
+}
+
#endif /* _ASM_IO_H */
diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h
index 07499d966d5..d77695abb9e 100644
--- a/include/asm-nios/io.h
+++ b/include/asm-nios/io.h
@@ -97,4 +97,8 @@ static inline void outsl (unsigned long port, const void *src, unsigned long cou
while (count--) outl (*p++, port);
}
+static inline void sync(void)
+{
+}
+
#endif /* __ASM_NIOS_IO_H_ */
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index 0fab53bf0e9..5bb5322952f 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -24,7 +24,10 @@
#ifndef __ASM_NIOS2_IO_H_
#define __ASM_NIOS2_IO_H_
-#define sync() asm volatile ("sync" : : : "memory");
+static inline void sync(void)
+{
+ __asm__ __volatile__ ("sync" : : : "memory");
+}
extern unsigned char inb (unsigned char *port);
extern unsigned short inw (unsigned short *port);
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 8e5fe113cb3..bbc9ba0be65 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -95,8 +95,15 @@ extern void _outsl_ns(volatile u32 *port, const void *buf, int nl);
* Acts as a barrier to ensure all previous I/O accesses have
* completed before any further ones are issued.
*/
-#define eieio() __asm__ __volatile__ ("eieio" : : : "memory");
-#define sync() __asm__ __volatile__ ("sync" : : : "memory");
+static inline void eieio(void)
+{
+ __asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void sync(void)
+{
+ __asm__ __volatile__ ("sync" : : : "memory");
+}
/* Enforce in-order execution of data I/O.
* No distinction between read/write on PPC; use eieio for all three.
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 914f28b4617..b226825ee20 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -335,41 +335,6 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
* instructions.
*/
-#define TLB_LO 1
-#define TLB_HI 0
-
-#define TLB_DATA TLB_LO
-#define TLB_TAG TLB_HI
-
-/* Tag portion */
-
-#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
-#define TLB_PAGESZ_MASK 0x00000380
-#define TLB_PAGESZ(x) (((x) & 0x7) << 7)
-#define PAGESZ_1K 0
-#define PAGESZ_4K 1
-#define PAGESZ_16K 2
-#define PAGESZ_64K 3
-#define PAGESZ_256K 4
-#define PAGESZ_1M 5
-#define PAGESZ_4M 6
-#define PAGESZ_16M 7
-#define TLB_VALID 0x00000040 /* Entry is valid */
-
-/* Data portion */
-
-#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
-#define TLB_PERM_MASK 0x00000300
-#define TLB_EX 0x00000200 /* Instruction execution allowed */
-#define TLB_WR 0x00000100 /* Writes permitted */
-#define TLB_ZSEL_MASK 0x000000F0
-#define TLB_ZSEL(x) (((x) & 0xF) << 4)
-#define TLB_ATTR_MASK 0x0000000F
-#define TLB_W 0x00000008 /* Caching is write-through */
-#define TLB_I 0x00000004 /* Caching is inhibited */
-#define TLB_M 0x00000002 /* Memory is coherent */
-#define TLB_G 0x00000001 /* Memory is guarded from prefetch */
-
/*
* e500 support
*/
@@ -482,7 +447,162 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23)
#define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24)
-#ifdef CONFIG_440SPE
+#ifdef CONFIG_440
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn))
+#define TLB2(a) ((a) & 0x00000fbf)
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ;\
+0: mflr r0 ;\
+ mtlr r1 ;\
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/*----------------------------------------------------------------------------+
+| TLB specific defines.
++----------------------------------------------------------------------------*/
+#define TLB_256MB_ALIGN_MASK 0xF0000000
+#define TLB_16MB_ALIGN_MASK 0xFF000000
+#define TLB_1MB_ALIGN_MASK 0xFFF00000
+#define TLB_256KB_ALIGN_MASK 0xFFFC0000
+#define TLB_64KB_ALIGN_MASK 0xFFFF0000
+#define TLB_16KB_ALIGN_MASK 0xFFFFC000
+#define TLB_4KB_ALIGN_MASK 0xFFFFF000
+#define TLB_1KB_ALIGN_MASK 0xFFFFFC00
+#define TLB_256MB_SIZE 0x10000000
+#define TLB_16MB_SIZE 0x01000000
+#define TLB_1MB_SIZE 0x00100000
+#define TLB_256KB_SIZE 0x00040000
+#define TLB_64KB_SIZE 0x00010000
+#define TLB_16KB_SIZE 0x00004000
+#define TLB_4KB_SIZE 0x00001000
+#define TLB_1KB_SIZE 0x00000400
+
+#define TLB_WORD0_EPN_MASK 0xFFFFFC00
+#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_V_MASK 0x00000200
+#define TLB_WORD0_V_ENABLE 0x00000200
+#define TLB_WORD0_V_DISABLE 0x00000000
+#define TLB_WORD0_TS_MASK 0x00000100
+#define TLB_WORD0_TS_1 0x00000100
+#define TLB_WORD0_TS_0 0x00000000
+#define TLB_WORD0_SIZE_MASK 0x000000F0
+#define TLB_WORD0_SIZE_1KB 0x00000000
+#define TLB_WORD0_SIZE_4KB 0x00000010
+#define TLB_WORD0_SIZE_16KB 0x00000020
+#define TLB_WORD0_SIZE_64KB 0x00000030
+#define TLB_WORD0_SIZE_256KB 0x00000040
+#define TLB_WORD0_SIZE_1MB 0x00000050
+#define TLB_WORD0_SIZE_16MB 0x00000070
+#define TLB_WORD0_SIZE_256MB 0x00000090
+#define TLB_WORD0_TPAR_MASK 0x0000000F
+#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD1_RPN_MASK 0xFFFFFC00
+#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_PAR1_MASK 0x00000300
+#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define TLB_WORD1_PAR1_0 0x00000000
+#define TLB_WORD1_PAR1_1 0x00000100
+#define TLB_WORD1_PAR1_2 0x00000200
+#define TLB_WORD1_PAR1_3 0x00000300
+#define TLB_WORD1_ERPN_MASK 0x0000000F
+#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD2_PAR2_MASK 0xC0000000
+#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+#define TLB_WORD2_PAR2_0 0x00000000
+#define TLB_WORD2_PAR2_1 0x40000000
+#define TLB_WORD2_PAR2_2 0x80000000
+#define TLB_WORD2_PAR2_3 0xC0000000
+#define TLB_WORD2_U0_MASK 0x00008000
+#define TLB_WORD2_U0_ENABLE 0x00008000
+#define TLB_WORD2_U0_DISABLE 0x00000000
+#define TLB_WORD2_U1_MASK 0x00004000
+#define TLB_WORD2_U1_ENABLE 0x00004000
+#define TLB_WORD2_U1_DISABLE 0x00000000
+#define TLB_WORD2_U2_MASK 0x00002000
+#define TLB_WORD2_U2_ENABLE 0x00002000
+#define TLB_WORD2_U2_DISABLE 0x00000000
+#define TLB_WORD2_U3_MASK 0x00001000
+#define TLB_WORD2_U3_ENABLE 0x00001000
+#define TLB_WORD2_U3_DISABLE 0x00000000
+#define TLB_WORD2_W_MASK 0x00000800
+#define TLB_WORD2_W_ENABLE 0x00000800
+#define TLB_WORD2_W_DISABLE 0x00000000
+#define TLB_WORD2_I_MASK 0x00000400
+#define TLB_WORD2_I_ENABLE 0x00000400
+#define TLB_WORD2_I_DISABLE 0x00000000
+#define TLB_WORD2_M_MASK 0x00000200
+#define TLB_WORD2_M_ENABLE 0x00000200
+#define TLB_WORD2_M_DISABLE 0x00000000
+#define TLB_WORD2_G_MASK 0x00000100
+#define TLB_WORD2_G_ENABLE 0x00000100
+#define TLB_WORD2_G_DISABLE 0x00000000
+#define TLB_WORD2_E_MASK 0x00000080
+#define TLB_WORD2_E_ENABLE 0x00000080
+#define TLB_WORD2_E_DISABLE 0x00000000
+#define TLB_WORD2_UX_MASK 0x00000020
+#define TLB_WORD2_UX_ENABLE 0x00000020
+#define TLB_WORD2_UX_DISABLE 0x00000000
+#define TLB_WORD2_UW_MASK 0x00000010
+#define TLB_WORD2_UW_ENABLE 0x00000010
+#define TLB_WORD2_UW_DISABLE 0x00000000
+#define TLB_WORD2_UR_MASK 0x00000008
+#define TLB_WORD2_UR_ENABLE 0x00000008
+#define TLB_WORD2_UR_DISABLE 0x00000000
+#define TLB_WORD2_SX_MASK 0x00000004
+#define TLB_WORD2_SX_ENABLE 0x00000004
+#define TLB_WORD2_SX_DISABLE 0x00000000
+#define TLB_WORD2_SW_MASK 0x00000002
+#define TLB_WORD2_SW_ENABLE 0x00000002
+#define TLB_WORD2_SW_DISABLE 0x00000000
+#define TLB_WORD2_SR_MASK 0x00000001
+#define TLB_WORD2_SR_ENABLE 0x00000001
+#define TLB_WORD2_SR_DISABLE 0x00000000
+
/*----------------------------------------------------------------------------+
| Following instructions are not available in Book E mode of the GNU assembler.
+----------------------------------------------------------------------------*/
@@ -516,11 +636,15 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define MBAR_INST .long 0x7c000000|\
(854<<1)
-/*----------------------------------------------------------------------------+
-| Following instruction is not available in PPC405 mode of the GNU assembler.
-+----------------------------------------------------------------------------*/
-#define TLBRE(rt,ra,ws) .long 0x7c000000|\
- (rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+#ifndef __ASSEMBLY__
+/* Prototypes */
+void mttlb1(unsigned long index, unsigned long value);
+void mttlb2(unsigned long index, unsigned long value);
+void mttlb3(unsigned long index, unsigned long value);
+unsigned long mftlb1(unsigned long index);
+unsigned long mftlb2(unsigned long index);
+unsigned long mftlb3(unsigned long index);
+#endif /* __ASSEMBLY__ */
-#endif
+#endif /* CONFIG_440 */
#endif /* _PPC_MMU_H_ */
diff --git a/include/common.h b/include/common.h
index 982d6a8637f..b162dbd7cfc 100644
--- a/include/common.h
+++ b/include/common.h
@@ -187,6 +187,7 @@ void hang (void) __attribute__ ((noreturn));
long int initdram (int);
int display_options (void);
void print_size (ulong, const char *);
+int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen);
/* common/main.c */
void main_loop (void);
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
new file mode 100644
index 00000000000..c750e146569
--- /dev/null
+++ b/include/configs/katmai.h
@@ -0,0 +1,415 @@
+/*
+ * (C) Copyright 2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * katmai.h - configuration for AMCC Katmai (440SPe)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_KATMAI 1 /* Board is Katmai */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_440 1 /* ... PPC440 family */
+#define CONFIG_440SPE 1 /* Specifc SPe support */
+#undef CFG_DRAM_TEST /* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
+#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */
+
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xff000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */
+
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE
+
+#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */
+#define CFG_PCIE_MEMSIZE 0x01000000
+#define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */
+
+#define CFG_PCIE0_CFGBASE 0xc0000000
+#define CFG_PCIE0_XCFGBASE 0xc0000400
+#define CFG_PCIE1_CFGBASE 0xc0001000
+#define CFG_PCIE1_XCFGBASE 0xc0001400
+#define CFG_PCIE2_CFGBASE 0xc0002000
+#define CFG_PCIE2_XCFGBASE 0xc0002400
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
+
+#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI 1
+#undef CONFIG_UART1_CONSOLE
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses */
+#define IIC0_DIMM0_ADDR 0x51
+#define IIC0_DIMM1_ADDR 0x52
+#undef CONFIG_STRESS
+#undef ENABLE_ECC
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_SPD_BUS_NUM 0 /* The I2C bus for SPD */
+
+#define IIC0_BOOTPROM_ADDR 0x50
+#define IIC0_ALT_BOOTPROM_ADDR 0x54
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0x50)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11 1
+#define CFG_RTC_BUS_NUM 1 /* The I2C bus for RTC */
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */
+
+/* I2C DTT */
+#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
+#define CFG_DTT_BUS_NUM 1 /* The I2C bus for DTT */
+/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the ADM1021, the rest determines index into
+ * CFG_DTT_ADM1021 array below.
+ */
+#define CONFIG_DTT_SENSORS { 0, 1 }
+
+/*
+ * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For Katmai board:
+ * - only one ADM1021
+ * - i2c addr 0x18
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg
+ */
+#define CFG_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} }
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=katmai\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=katmai/uImage\0" \
+ "kernel_addr=fff10000\0" \
+ "ramdisk_addr=fff20000\0" \
+ "initrd_high=30000000\0" \
+ "load=tftp 200000 katmai/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b ${fileaddr} fffc0000 ${filesize};" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ "kozio=bootm ffc60000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_DTT | \
+ CFG_CMD_ELF | \
+ CFG_CMD_EXT2 | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_RESET_DELAY 1000
+#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* needed for NetConsole */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#undef CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ * NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+
+/*-----------------------------------------------------------------------
+ * Xilinx System ACE support
+ *----------------------------------------------------------------------*/
+#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */
+#define CFG_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */
+#define CFG_SYSTEMACE_BASE CFG_ACE_BASE
+#define CONFIG_DOS_PARTITION 1
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+
+/* Memory Bank 0 (Flash) initialization */
+#define CFG_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \
+ EBC_BXAP_TWT_ENCODE(7) | \
+ EBC_BXAP_BCE_DISABLE | \
+ EBC_BXAP_BCT_2TRANS | \
+ EBC_BXAP_CSN_ENCODE(0) | \
+ EBC_BXAP_OEN_ENCODE(0) | \
+ EBC_BXAP_WBN_ENCODE(0) | \
+ EBC_BXAP_WBF_ENCODE(0) | \
+ EBC_BXAP_TH_ENCODE(0) | \
+ EBC_BXAP_RE_DISABLED | \
+ EBC_BXAP_SOR_DELAYED | \
+ EBC_BXAP_BEM_WRITEONLY | \
+ EBC_BXAP_PEN_DISABLED)
+#define CFG_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | \
+ EBC_BXCR_BS_16MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (Xilinx System ACE controller) initialization */
+#define CFG_EBC_PB1AP 0x7F8FFE80
+#define CFG_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE) | \
+ EBC_BXCR_BS_1MB | \
+ EBC_BXCR_BU_RW | \
+ EBC_BXCR_BW_16BIT)
+
+/*-------------------------------------------------------------------------
+ * Initialize EBC CONFIG -
+ * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+ * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+ *-------------------------------------------------------------------------*/
+#define CFG_EBC_CFG (EBC_CFG_LE_UNLOCK | \
+ EBC_CFG_PTD_ENABLE | \
+ EBC_CFG_RTC_16PERCLK | \
+ EBC_CFG_ATC_PREVIOUS | \
+ EBC_CFG_DTC_PREVIOUS | \
+ EBC_CFG_CTC_PREVIOUS | \
+ EBC_CFG_OEO_PREVIOUS | \
+ EBC_CFG_EMC_DEFAULT | \
+ EBC_CFG_PME_DISABLE | \
+ EBC_CFG_PR_16)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index f60973b26d5..621a81c9c56 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -265,6 +265,7 @@
*/
#if !defined(CONFIG_PRS200)
#define CONFIG_LCD 1
+#define CONFIG_PROGRESSBAR 1
#endif
#if defined(CONFIG_LCD)
diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h
index ccb02933294..0c1029426c2 100644
--- a/include/configs/mecp5200.h
+++ b/include/configs/mecp5200.h
@@ -88,10 +88,10 @@
/* USB */
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#else
-#define ADD_USB_CMD 0
+#define ADD_USB_CMD 0
#endif
/*
@@ -100,7 +100,7 @@
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_EEPROM | \
CFG_CMD_FAT | \
- CFG_CMD_EXT2 | \
+ CFG_CMD_EXT2 | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_BSP | \
@@ -110,11 +110,11 @@
#include <cmd_confdefs.h>
#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
-# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT 1
# define CFG_LOWBOOT16 1
#endif
#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
-# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT 1
# define CFG_LOWBOOT08 1
#endif
@@ -131,20 +131,20 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
- "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
- "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
- "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
- "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
- "loadaddr=01000000\0" \
- "serverip=192.168.2.99\0" \
- "gatewayip=10.0.0.79\0" \
- "user=mu\0" \
- "target=mecp5200.esd\0" \
- "script=mecp5200.bat\0" \
- "image=/tftpboot/vxWorks_mecp5200\0" \
- "ipaddr=10.0.13.196\0" \
- "netmask=255.255.0.0\0" \
+ "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
+ "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
+ "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
+ "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
+ "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
+ "loadaddr=01000000\0" \
+ "serverip=192.168.2.99\0" \
+ "gatewayip=10.0.0.79\0" \
+ "user=mu\0" \
+ "target=mecp5200.esd\0" \
+ "script=mecp5200.bat\0" \
+ "image=/tftpboot/vxWorks_mecp5200\0" \
+ "ipaddr=10.0.13.196\0" \
+ "netmask=255.255.0.0\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_vxworks0"
@@ -171,12 +171,12 @@
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 5
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CFG_I2C_MULTI_EEPROMS 1
+#define CFG_I2C_MULTI_EEPROMS 1
/*
* Flash configuration
*/
#define CFG_FLASH_BASE 0xFFC00000
-#define CFG_FLASH_SIZE 0x00400000
+#define CFG_FLASH_SIZE 0x00400000
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000)
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 512
@@ -200,15 +200,15 @@
#define CONFIG_ENV_OVERWRITE 1
#endif
-#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */
-#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
-#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
+#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
#if 0
#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
#endif
-#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */
+#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
-#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
+#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */
/*
@@ -272,7 +272,7 @@
#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
@@ -339,7 +339,7 @@
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x005C)
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
#endif /* __CONFIG_H */
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
new file mode 100644
index 00000000000..5328e8d6b1c
--- /dev/null
+++ b/include/configs/motionpro.h
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2003-2007
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+/*
+ * High Level Configuration Options
+ */
+
+
+/* CPU and board */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
+#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
+
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_IMMAP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_MII | \
+ CFG_CMD_BEDBUG | \
+ CFG_CMD_NET | \
+ CFG_CMD_PING)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_NETCONSOLE 1 /* network console */
+#define CONFIG_BAUDRATE 115200
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_PHY_ADDR 0x2
+#define CONFIG_PHY_TYPE 0x79c874
+
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b"
+#define DEBUG_BOOTKEYS 0
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#undef CONFIG_BOOTARGS
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
+ "press \"<Esc><Esc>\" to stop\n"
+
+#define CONFIG_ETHADDR 00:50:C2:40:10:00
+#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+
+/*
+ * Default environment settings
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "sdram_test=0\0" \
+ "netdev=eth0\0" \
+ "hostname=motionpro\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.22\0" \
+ "serverip=192.168.1.1\0" \
+ "gatewayip=192.168.1.1\0" \
+ "kernel_addr=200000\0" \
+ "u-boot_addr=100000\0" \
+ "kernel_sector=20\0" \
+ "kernel_size=1000\0" \
+ "console=ttyS0,115200\0" \
+ "rootpath=/opt/eldk-4.1/ppc_6xx\0" \
+ "bootfile=/tftpboot/motionpro/uImage\0" \
+ "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
+ "load=tftp $(u-boot_addr) $(u-boot)\0" \
+ "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \
+ "cp.b $(u-boot_addr) fff00000 $(filesize);" \
+ "prot on fff00000 fff3ffff\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) console=$(console) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):" \
+ "$(netmask):$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;bootm $(kernel_addr) " \
+ "$(ramdisk_addr)\0" \
+ "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \
+ "bootm $(kernel_addr)\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "fstype=ext3\0" \
+ "fatargs=setenv bootargs init=/linuxrc rw\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run net_nfs"
+
+
+/*
+ * do board-specific init
+ */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
+
+/*
+ * Low level configuration
+ */
+
+
+/*
+ * Clock configuration: SYS_XTALIN = 25MHz
+ */
+#define CFG_MPC5XXX_CLKIN 25000000
+
+
+/*
+ * Memory map
+ */
+/*
+ * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
+ * Setting MBAR to otherwise will cause system hang when using SmartDMA such
+ * as network commands.
+ */
+#define CFG_MBAR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000
+
+/*
+ * If building for running out of SDRAM, then MBAR has been set up beforehand
+ * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
+ * MBAR, as given in the doccumentation.
+ */
+#if TEXT_BASE == 0x00100000
+#define CFG_DEFAULT_MBAR 0xf0000000
+#else /* TEXT_BASE != 0x00100000 */
+#define CFG_DEFAULT_MBAR 0x80000000
+#define CFG_LOWBOOT 1
+#endif /* TEXT_BASE == 0x00100000 */
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
+
+
+/*
+ * Chip selects configuration
+ */
+/* Boot Chipselect */
+#define CFG_BOOTCS_START CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG 0x03035D00
+
+/* Flash memory addressing */
+#define CFG_CS0_START CFG_FLASH_BASE
+#define CFG_CS0_SIZE CFG_FLASH_SIZE
+#define CFG_CS0_CFG CFG_BOOTCS_CFG
+
+/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
+#define CFG_CS1_START 0x50000000
+#define CFG_CS1_SIZE 0x10000
+#define CFG_CS1_CFG 0x05055800
+
+/* Local register access */
+#define CFG_CS2_START 0x50010000
+#define CFG_CS2_SIZE 0x10000
+#define CFG_CS2_CFG 0x05055800
+
+/* Anybus CompactCom Module memory addressing */
+#define CFG_CS3_START 0x50020000
+#define CFG_CS3_SIZE 0x10000
+#define CFG_CS3_CFG 0x05055800
+
+/* No burst and dead cycle = 2 for all CSs */
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x22222222
+
+
+/*
+ * SDRAM configuration
+ */
+/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */
+#define SDRAM_CONFIG1 0x52222600
+#define SDRAM_CONFIG2 0x88b70000
+#define SDRAM_CONTROL 0x50570000
+#define SDRAM_MODE 0x008d0000
+
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_BASE 0xff000000
+#define CFG_FLASH_SIZE 0x01000000
+#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+/* This has to be a multiple of the Flash sector size */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+#define CFG_ENV_SIZE 0x1000
+#define CFG_ENV_SECT_SIZE 0x10000
+
+
+/*
+ * Pin multiplexing configuration
+ */
+
+/* PSC1: UART1
+ * PSC2: GPIO (default)
+ * PSC3: GPIO (default)
+ * USB: 2xUART4/5
+ * Ethernet: Ethernet 100Mbit with MD
+ * Timer: CAN2/GPIO
+ * PSC6/IRDA: GPIO (default)
+ */
+#define CFG_GPS_PORT_CONFIG 0x1105a004
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */
+
+#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+
+
+/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
+#define CFG_RESET_ADDRESS 0xfff00100
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index b767449759d..f2f059863d8 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -115,7 +115,7 @@
":${hostname}:${netdev}:off panic=1\0" \
"flash_nfs=run nfsargs addip;" \
"bootm ${kernel_addr}\0" \
- "flash_nand=nand_args addip addcon;bootm ${kernel_addr}\0" \
+ "flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/sc3/uImage\0" \
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 098aa3f0a6e..29f3b408d27 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -391,7 +391,7 @@
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
/* Memory Bank 0 (NOR-FLASH) initialization */
-#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0AP 0x03017200
#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000)
/* Memory Bank 3 (NAND-FLASH) initialization */
@@ -400,7 +400,7 @@
#else
#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
/* Memory Bank 3 (NOR-FLASH) initialization */
-#define CFG_EBC_PB3AP 0x03017300
+#define CFG_EBC_PB3AP 0x03017200
#define CFG_EBC_PB3CR (CFG_FLASH | 0xda000)
/* Memory Bank 0 (NAND-FLASH) initialization */
diff --git a/include/i2c.h b/include/i2c.h
index a8f729afe01..54c6f9fbc6c 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -46,6 +46,16 @@
*/
#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
+#if defined(CONFIG_I2C_MULTI_BUS)
+#define CFG_MAX_I2C_BUS 2
+#define I2C_GET_BUS() i2c_get_bus_num()
+#define I2C_SET_BUS(a) i2c_set_bus_num(a)
+#else
+#define CFG_MAX_I2C_BUS 1
+#define I2C_GET_BUS() 0
+#define I2C_SET_BUS(a)
+#endif
+
/*
* Initialization, must be called once on start up, may be called
* repeatedly to change the speed and slave addresses.
diff --git a/include/ide.h b/include/ide.h
index dfef32f267d..6976a6c319c 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -48,8 +48,8 @@ typedef ulong lbaint_t;
* Function Prototypes
*/
-void ide_init (void);
-ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
-ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
+void ide_init(void);
+ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer);
#endif /* _IDE_H */
diff --git a/include/part.h b/include/part.h
index 318aa3cb3ff..29c03205f2d 100644
--- a/include/part.h
+++ b/include/part.h
@@ -22,6 +22,7 @@
*/
#ifndef _PART_H
#define _PART_H
+
#include <ide.h>
typedef struct block_dev_desc {
@@ -43,7 +44,11 @@ typedef struct block_dev_desc {
unsigned long (*block_read)(int dev,
unsigned long start,
lbaint_t blkcnt,
- unsigned long *buffer);
+ void *buffer);
+ unsigned long (*block_write)(int dev,
+ unsigned long start,
+ lbaint_t blkcnt,
+ const void *buffer);
}block_dev_desc_t;
/* Interface types: */
@@ -83,6 +88,14 @@ typedef struct disk_partition {
uchar type[32]; /* string type description */
} disk_partition_t;
+/* Misc _get_dev functions */
+block_dev_desc_t* get_dev(char* ifname, int dev);
+block_dev_desc_t* ide_get_dev(int dev);
+block_dev_desc_t* scsi_get_dev(int dev);
+block_dev_desc_t* usb_stor_get_dev(int dev);
+block_dev_desc_t* mmc_get_dev(int dev);
+block_dev_desc_t* systemace_get_dev(int dev);
+
/* disk/part.c */
int get_partition_info (block_dev_desc_t * dev_desc, int part, disk_partition_t *info);
void print_part (block_dev_desc_t *dev_desc);
diff --git a/include/ppc405.h b/include/ppc405.h
index e475fa54cdf..a49912cabb9 100644
--- a/include/ppc405.h
+++ b/include/ppc405.h
@@ -240,6 +240,7 @@
#define pbesr0 0x21 /* periph bus error status reg 0 */
#define pbesr1 0x22 /* periph bus error status reg 1 */
#define epcr 0x23 /* external periph control reg */
+#define EBC0_CFG 0x23 /* external bus configuration reg */
#ifdef CONFIG_405EP
/******************************************************************************
diff --git a/include/ppc440.h b/include/ppc440.h
index 91cff414af6..c24f5b7ab17 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -533,9 +533,12 @@
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
-#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
-#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
+#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
+#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
+#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
/*-----------------------------------------------------------------------------+
| Memory Controller Options 1
@@ -730,6 +733,7 @@
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
+#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
@@ -847,6 +851,7 @@
#define pbear 0x20 /* periph bus error addr reg */
#define pbesr 0x21 /* periph bus error status reg */
#define xbcfg 0x23 /* external bus configuration reg */
+#define EBC0_CFG 0x23 /* external bus configuration reg */
#define xbcid 0x24 /* external bus core id reg */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
diff --git a/lib_generic/display_options.c b/lib_generic/display_options.c
index 512e8980d9d..5ddd94fd5ac 100644
--- a/lib_generic/display_options.c
+++ b/lib_generic/display_options.c
@@ -21,7 +21,10 @@
* MA 02111-1307 USA
*/
+#include <config.h>
#include <common.h>
+#include <linux/ctype.h>
+#include <asm/io.h>
int display_options (void)
{
@@ -65,3 +68,70 @@ void print_size (ulong size, const char *s)
}
printf (" %cB%s", c, s);
}
+
+/*
+ * Print data buffer in hex and ascii form to the terminal.
+ *
+ * data reads are buffered so that each memory address is only read once.
+ * Useful when displaying the contents of volatile registers.
+ *
+ * parameters:
+ * addr: Starting address to display at start of line
+ * data: pointer to data buffer
+ * width: data value width. May be 1, 2, or 4.
+ * count: number of values to display
+ * linelen: Number of values to print per line; specify 0 for default length
+ */
+#define MAX_LINE_LENGTH_BYTES (64)
+#define DEFAULT_LINE_LENGTH_BYTES (16)
+int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen)
+{
+ uint8_t linebuf[MAX_LINE_LENGTH_BYTES];
+ uint32_t *uip = (void*)linebuf;
+ uint16_t *usp = (void*)linebuf;
+ uint8_t *ucp = (void*)linebuf;
+ int i;
+
+ if (linelen*width > MAX_LINE_LENGTH_BYTES)
+ linelen = MAX_LINE_LENGTH_BYTES / width;
+ if (linelen < 1)
+ linelen = DEFAULT_LINE_LENGTH_BYTES / width;
+
+ while (count) {
+ printf("%08lx:", addr);
+
+ /* check for overflow condition */
+ if (count < linelen)
+ linelen = count;
+
+ /* Copy from memory into linebuf and print hex values */
+ for (i = 0; i < linelen; i++) {
+ if (width == 4) {
+ uip[i] = *(volatile uint32_t *)data;
+ printf(" %08x", uip[i]);
+ } else if (width == 2) {
+ usp[i] = *(volatile uint16_t *)data;
+ printf(" %04x", usp[i]);
+ } else {
+ ucp[i] = *(volatile uint8_t *)data;
+ printf(" %02x", ucp[i]);
+ }
+ data += width;
+ }
+
+ /* Print data in ASCII characters */
+ puts(" ");
+ for (i = 0; i < linelen * width; i++)
+ putc(isprint(ucp[i]) && (ucp[i] < 0x80) ? ucp[i] : '.');
+ putc ('\n');
+
+ /* update references */
+ addr += linelen * width;
+ count -= linelen;
+
+ if (ctrlc())
+ return -1;
+ }
+
+ return 0;
+}