diff options
-rw-r--r-- | Makefile | 6 | ||||
-rw-r--r-- | board/imx31_phycore/imx31_phycore.c | 57 | ||||
-rw-r--r-- | common/lcd.c | 100 | ||||
-rw-r--r-- | drivers/gpio/Makefile | 3 | ||||
-rw-r--r-- | drivers/gpio/mx31_gpio.c | 73 | ||||
-rw-r--r-- | drivers/spi/mxc_spi.c | 93 | ||||
-rw-r--r-- | drivers/video/Makefile | 2 | ||||
-rw-r--r-- | drivers/video/mx3fb.c | 856 | ||||
-rw-r--r-- | drivers/video/s6e63d6.c | 76 | ||||
-rw-r--r-- | include/asm-arm/arch-mx31/mx31-regs.h | 16 | ||||
-rw-r--r-- | include/asm-arm/arch-mx31/mx31.h | 20 | ||||
-rw-r--r-- | include/configs/imx31_phycore.h | 23 | ||||
-rw-r--r-- | include/lcd.h | 21 | ||||
-rw-r--r-- | include/s6e63d6.h | 37 |
14 files changed, 1325 insertions, 58 deletions
@@ -3029,8 +3029,12 @@ apollon_config : unconfig imx31_litekit_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31 +imx31_phycore_eet_config \ imx31_phycore_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31 + @if [ -n "$(findstring _eet_,$@)" ]; then \ + echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ + fi + @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31 mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c index ae93444a163..93a5c40d77e 100644 --- a/board/imx31_phycore/imx31_phycore.c +++ b/board/imx31_phycore/imx31_phycore.c @@ -23,6 +23,7 @@ #include <common.h> +#include <s6e63d6.h> #include <asm/arch/mx31.h> #include <asm/arch/mx31-regs.h> @@ -66,6 +67,62 @@ int board_init (void) return 0; } +#ifdef BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_S6E63D6 + struct s6e63d6 data = { + /* + * See comment in mxc_spi.c::decode_cs() for .cs field format. + * We use GPIO 57 as a chipselect for the S6E63D6 and chipselect + * 2 of the SPI controller #1, since it is unused. + */ + .cs = 2 | (57 << 8), + .bus = 0, + .id = 0, + }; + int ret; + + /* SPI1 */ + mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK); + mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B); + mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI); + mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO); + mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B); + mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B); + mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B); + + /* start SPI1 clock */ + __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2); + + /* GPIO 57 */ + /* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */ + mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO)); + + /* SPI1 CS2 is free */ + ret = s6e63d6_init(&data); + if (ret) + return ret; + + /* + * This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC + * OLED display connected to a S6E63D6 SPI display controller in the + * 18 bit RGB mode + */ + s6e63d6_index(&data, 2); + s6e63d6_param(&data, 0x0182); + s6e63d6_index(&data, 3); + s6e63d6_param(&data, 0x8130); + s6e63d6_index(&data, 0x10); + s6e63d6_param(&data, 0x0000); + s6e63d6_index(&data, 5); + s6e63d6_param(&data, 0x0001); + s6e63d6_index(&data, 0x22); +#endif + return 0; +} +#endif + int checkboard (void) { printf("Board: Phytec phyCore i.MX31\n"); diff --git a/common/lcd.c b/common/lcd.c index 2bcdba22577..d238fdde858 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -84,7 +84,7 @@ extern void lcd_enable (void); static void *lcd_logo (void); -#if LCD_BPP == LCD_COLOR8 +#if (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) extern void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue); #endif @@ -622,19 +622,15 @@ void bitmap_plot (int x, int y) */ int lcd_display_bitmap(ulong bmp_image, int x, int y) { -#ifdef CONFIG_ATMEL_LCD - uint *cmap; -#elif !defined(CONFIG_MCC200) - ushort *cmap; -#endif + ushort *cmap = NULL, *cmap_base = NULL; ushort i, j; uchar *fb; bmp_image_t *bmp=(bmp_image_t *)bmp_image; uchar *bmap; ushort padded_line; - unsigned long width, height; + unsigned long width, height, byte_width; unsigned long pwidth = panel_info.vl_col; - unsigned colors,bpix; + unsigned colors, bpix, bmp_bpix; unsigned long compression; #if defined(CONFIG_PXA250) struct pxafb_info *fbi = &panel_info.pxa; @@ -647,22 +643,24 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) (bmp->header.signature[1]=='M'))) { printf ("Error: no valid bmp image at %lx\n", bmp_image); return 1; -} + } width = le32_to_cpu (bmp->header.width); height = le32_to_cpu (bmp->header.height); - colors = 1<<le16_to_cpu (bmp->header.bit_count); + bmp_bpix = le16_to_cpu(bmp->header.bit_count); + colors = 1 << bmp_bpix; compression = le32_to_cpu (bmp->header.compression); bpix = NBITS(panel_info.vl_bpix); - if ((bpix != 1) && (bpix != 8)) { - printf ("Error: %d bit/pixel mode not supported by U-Boot\n", - bpix); + if ((bpix != 1) && (bpix != 8) && (bpix != 16)) { + printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n", + bpix, bmp_bpix); return 1; } - if (bpix != le16_to_cpu(bmp->header.bit_count)) { + /* We support displaying 8bpp BMPs on 16bpp LCDs */ + if (bpix != bmp_bpix && (bmp_bpix != 8 || bpix != 16)) { printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n", bpix, le16_to_cpu(bmp->header.bit_count)); @@ -674,17 +672,17 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) #if !defined(CONFIG_MCC200) /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */ - if (bpix==8) { + if (bmp_bpix == 8) { #if defined(CONFIG_PXA250) cmap = (ushort *)fbi->palette; #elif defined(CONFIG_MPC823) cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]); -#elif defined(CONFIG_ATMEL_LCD) - cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0)); -#else -# error "Don't know location of color map" +#elif !defined(CONFIG_ATMEL_LCD) + cmap = panel_info.cmap; #endif + cmap_base = cmap; + /* Set color map */ for (i=0; i<colors; ++i) { bmp_color_table_entry_t cte = bmp->color_table[i]; @@ -698,10 +696,10 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) #else *cmap = colreg; #endif -#if defined(CONFIG_PXA250) - cmap++; -#elif defined(CONFIG_MPC823) +#if defined(CONFIG_MPC823) cmap--; +#else + cmap++; #endif #else /* CONFIG_ATMEL_LCD */ lcd_setcolreg(i, cte.red, cte.green, cte.blue); @@ -738,17 +736,59 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset); fb = (uchar *) (lcd_base + (y + height - 1) * lcd_line_length + x); - for (i = 0; i < height; ++i) { - WATCHDOG_RESET(); - for (j = 0; j < width ; j++) + + switch (bmp_bpix) { + case 1: /* pass through */ + case 8: + if (bpix != 16) + byte_width = width; + else + byte_width = width * 2; + + for (i = 0; i < height; ++i) { + WATCHDOG_RESET(); + for (j = 0; j < width; j++) { + if (bpix != 16) { #if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD) - *(fb++) = *(bmap++); + *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) - *(fb++)=255-*(bmap++); + *(fb++) = 255 - *(bmap++); #endif - bmap += (width - padded_line); - fb -= (width + lcd_line_length); - } + } else { + *(uint16_t *)fb = cmap_base[*(bmap++)]; + fb += sizeof(uint16_t) / sizeof(*fb); + } + } + bmap += (width - padded_line); + fb -= (byte_width + lcd_line_length); + } + break; + +#if defined(CONFIG_BMP_16BPP) + case 16: + for (i = 0; i < height; ++i) { + WATCHDOG_RESET(); + for (j = 0; j < width; j++) { +#if defined(CONFIG_ATMEL_LCD_BGR555) + *(fb++) = ((bmap[0] & 0x1f) << 2) | + (bmap[1] & 0x03); + *(fb++) = (bmap[0] & 0xe0) | + ((bmap[1] & 0x7c) >> 2); + bmap += 2; +#else + *(fb++) = *(bmap++); + *(fb++) = *(bmap++); +#endif + } + bmap += (padded_line - width) * 2; + fb -= (width * 2 + lcd_line_length); + } + break; +#endif /* CONFIG_BMP_16BPP */ + + default: + break; + }; return (0); } diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index dd618ed71c7..f10144fe711 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -25,7 +25,8 @@ include $(TOPDIR)/config.mk LIB := $(obj)libgpio.a -COBJS-$(CONFIG_PCA953X) += pca953x.o +COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o +COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c new file mode 100644 index 00000000000..737aafa8228 --- /dev/null +++ b/drivers/gpio/mx31_gpio.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> + +/* GPIO port description */ +static unsigned long gpio_ports[] = { + [0] = GPIO1_BASE, + [1] = GPIO2_BASE, + [2] = GPIO3_BASE, +}; + +int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction) +{ + unsigned int port = gpio >> 5; + u32 l; + + if (port >= ARRAY_SIZE(gpio_ports)) + return 1; + + gpio &= 0x1f; + + l = __REG(gpio_ports[port] + GPIO_GDIR); + switch (direction) { + case MX31_GPIO_DIRECTION_OUT: + l |= 1 << gpio; + break; + case MX31_GPIO_DIRECTION_IN: + l &= ~(1 << gpio); + } + __REG(gpio_ports[port] + GPIO_GDIR) = l; + + return 0; +} + +void mx31_gpio_set(unsigned int gpio, unsigned int value) +{ + unsigned int port = gpio >> 5; + u32 l; + + if (port >= ARRAY_SIZE(gpio_ports)) + return; + + gpio &= 0x1f; + + l = __REG(gpio_ports[port] + GPIO_DR); + if (value) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + __REG(gpio_ports[port] + GPIO_DR) = l; +} diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 5957ada3a4a..fad98403a19 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -21,6 +21,7 @@ #include <common.h> #include <malloc.h> #include <spi.h> +#include <asm/errno.h> #include <asm/io.h> #ifdef CONFIG_MX27 @@ -32,6 +33,8 @@ #else +#include <asm/arch/mx31.h> + #define MXC_CSPIRXDATA 0x00 #define MXC_CSPITXDATA 0x04 #define MXC_CSPICTRL 0x08 @@ -68,6 +71,7 @@ struct mxc_spi_slave { struct spi_slave slave; unsigned long base; u32 ctrl_reg; + int gpio; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -85,26 +89,33 @@ static inline void reg_write(unsigned long addr, u32 val) *(volatile unsigned long*)addr = val; } -static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen) +static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen, + unsigned long flags) { struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL); - if (MXC_CSPICTRL_BITCOUNT(bitlen - 1) != (cfg_reg & MXC_CSPICTRL_BITCOUNT(31))) { - cfg_reg = (cfg_reg & ~MXC_CSPICTRL_BITCOUNT(31)) | - MXC_CSPICTRL_BITCOUNT(bitlen - 1); - reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg); - } + mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(31)) | + MXC_CSPICTRL_BITCOUNT(bitlen - 1); - reg_write(mxcs->base + MXC_CSPITXDATA, data); + if (cfg_reg != mxcs->ctrl_reg) + reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg); - cfg_reg |= MXC_CSPICTRL_XCH; + if (mxcs->gpio > 0 && (flags & SPI_XFER_BEGIN)) + mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL); - reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg); + reg_write(mxcs->base + MXC_CSPITXDATA, data); + + reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_XCH); while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH) ; + if (mxcs->gpio > 0 && (flags & SPI_XFER_END)) { + mx31_gpio_set(mxcs->gpio, + !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL)); + } + return reg_read(mxcs->base + MXC_CSPIRXDATA); } @@ -122,8 +133,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout; i < n_blks; - i++, in_l++, out_l++, bitlen -= 32) - *in_l = spi_xchg_single(slave, *out_l, bitlen); + i++, in_l++, out_l++, bitlen -= 32) { + u32 data = spi_xchg_single(slave, *out_l, bitlen, flags); + + /* Check if we're only transfering 8 or 16 bits */ + if (!i) { + if (bitlen < 9) + *(u8 *)din = data; + else if (bitlen < 17) + *(u16 *)din = data; + } + } return 0; } @@ -132,16 +152,55 @@ void spi_init(void) { } +static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) +{ + int ret; + + /* + * Some SPI devices require active chip-select over multiple + * transactions, we achieve this using a GPIO. Still, the SPI + * controller has to be configured to use one of its own chipselects. + * To use this feature you have to call spi_setup_slave() with + * cs = internal_cs | (gpio << 8), and you have to use some unused + * on this SPI controller cs between 0 and 3. + */ + if (cs > 3) { + mxcs->gpio = cs >> 8; + cs &= 3; + ret = mx31_gpio_direction(mxcs->gpio, MX31_GPIO_DIRECTION_OUT); + if (ret) { + printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); + return -EINVAL; + } + } else { + mxcs->gpio = -1; + } + + return cs; +} + struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { unsigned int ctrl_reg; struct mxc_spi_slave *mxcs; + int ret; - if (bus >= sizeof(spi_bases) / sizeof(spi_bases[0]) || - cs > 3) + if (bus >= ARRAY_SIZE(spi_bases)) return NULL; + mxcs = malloc(sizeof(struct mxc_spi_slave)); + if (!mxcs) + return NULL; + + ret = decode_cs(mxcs, cs); + if (ret < 0) { + free(mxcs); + return NULL; + } + + cs = ret; + ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) | MXC_CSPICTRL_BITCOUNT(31) | MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */ @@ -155,10 +214,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (mode & SPI_CS_HIGH) ctrl_reg |= MXC_CSPICTRL_SSPOL; - mxcs = malloc(sizeof(struct mxc_spi_slave)); - if (!mxcs) - return NULL; - mxcs->slave.bus = bus; mxcs->slave.cs = cs; mxcs->base = spi_bases[bus]; @@ -169,7 +224,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, void spi_free_slave(struct spi_slave *slave) { - free(slave); + struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); + + free(mxcs); } int spi_claim_bus(struct spi_slave *slave) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 7fba29fbcce..bc0085269c7 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -28,8 +28,10 @@ LIB := $(obj)libvideo.a COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o +COBJS-$(CONFIG_S6E63D6) += s6e63d6.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o +COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c new file mode 100644 index 00000000000..1e1d507652a --- /dev/null +++ b/drivers/video/mx3fb.c @@ -0,0 +1,856 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <lcd.h> +#include <asm/arch/mx31.h> +#include <asm/arch/mx31-regs.h> +#include <asm/errno.h> + +DECLARE_GLOBAL_DATA_PTR; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +short console_col; +short console_row; + +void lcd_initcolregs(void) +{ +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ +} + +void lcd_disable(void) +{ +} + +void lcd_panel_disable(void) +{ +} + +#define msleep(a) udelay(a * 1000) + +#define XRES 240 +#define YRES 320 +#define PANEL_TYPE IPU_PANEL_TFT +#define PIXEL_CLK 185925 +#define PIXEL_FMT IPU_PIX_FMT_RGB666 +#define H_START_WIDTH 9 /* left_margin */ +#define H_SYNC_WIDTH 1 /* hsync_len */ +#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */ +#define V_START_WIDTH 7 /* upper_margin */ +#define V_SYNC_WIDTH 1 /* vsync_len */ +#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */ +#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL) +#define IF_CONF 0 +#define IF_CLK_DIV 0x175 + +#define LCD_COLOR_IPU LCD_COLOR16 + +static ushort colormap[256]; + +vidinfo_t panel_info = { + .vl_col = XRES, + .vl_row = YRES, + .vl_bpix = LCD_COLOR_IPU, + .cmap = colormap, +}; + +#define BIT_PER_PIXEL NBITS(LCD_COLOR_IPU) + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* More formats can be copied from the Linux driver if needed */ +enum pixel_fmt { + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, +}; + +struct pixel_fmt_cfg { + u32 b0; + u32 b1; + u32 b2; + u32 acc; +}; + +static struct pixel_fmt_cfg fmt_cfg[] = { + [IPU_PIX_FMT_RGB24] = { + 0x1600AAAA, 0x00E05555, 0x00070000, 3, + }, + [IPU_PIX_FMT_RGB666] = { + 0x0005000F, 0x000B000F, 0x0011000F, 1, + }, + [IPU_PIX_FMT_BGR666] = { + 0x0011000F, 0x000B000F, 0x0005000F, 1, + }, + [IPU_PIX_FMT_RGB565] = { + 0x0004003F, 0x000A000F, 0x000F003F, 1, + } +}; + +enum ipu_panel { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +}; + +/* IPU Common registers */ +/* IPU_CONF and its bits already defined in mx31-regs.h */ +#define IPU_CHA_BUF0_RDY (0x04 + IPU_BASE) +#define IPU_CHA_BUF1_RDY (0x08 + IPU_BASE) +#define IPU_CHA_DB_MODE_SEL (0x0C + IPU_BASE) +#define IPU_CHA_CUR_BUF (0x10 + IPU_BASE) +#define IPU_FS_PROC_FLOW (0x14 + IPU_BASE) +#define IPU_FS_DISP_FLOW (0x18 + IPU_BASE) +#define IPU_TASKS_STAT (0x1C + IPU_BASE) +#define IPU_IMA_ADDR (0x20 + IPU_BASE) +#define IPU_IMA_DATA (0x24 + IPU_BASE) +#define IPU_INT_CTRL_1 (0x28 + IPU_BASE) +#define IPU_INT_CTRL_2 (0x2C + IPU_BASE) +#define IPU_INT_CTRL_3 (0x30 + IPU_BASE) +#define IPU_INT_CTRL_4 (0x34 + IPU_BASE) +#define IPU_INT_CTRL_5 (0x38 + IPU_BASE) +#define IPU_INT_STAT_1 (0x3C + IPU_BASE) +#define IPU_INT_STAT_2 (0x40 + IPU_BASE) +#define IPU_INT_STAT_3 (0x44 + IPU_BASE) +#define IPU_INT_STAT_4 (0x48 + IPU_BASE) +#define IPU_INT_STAT_5 (0x4C + IPU_BASE) +#define IPU_BRK_CTRL_1 (0x50 + IPU_BASE) +#define IPU_BRK_CTRL_2 (0x54 + IPU_BASE) +#define IPU_BRK_STAT (0x58 + IPU_BASE) +#define IPU_DIAGB_CTRL (0x5C + IPU_BASE) + +/* Image Converter Registers */ +#define IC_CONF (0x88 + IPU_BASE) +#define IC_PRP_ENC_RSC (0x8C + IPU_BASE) +#define IC_PRP_VF_RSC (0x90 + IPU_BASE) +#define IC_PP_RSC (0x94 + IPU_BASE) +#define IC_CMBP_1 (0x98 + IPU_BASE) +#define IC_CMBP_2 (0x9C + IPU_BASE) +#define PF_CONF (0xA0 + IPU_BASE) +#define IDMAC_CONF (0xA4 + IPU_BASE) +#define IDMAC_CHA_EN (0xA8 + IPU_BASE) +#define IDMAC_CHA_PRI (0xAC + IPU_BASE) +#define IDMAC_CHA_BUSY (0xB0 + IPU_BASE) + +/* Image Converter Register bits */ +#define IC_CONF_PRPENC_EN 0x00000001 +#define IC_CONF_PRPENC_CSC1 0x00000002 +#define IC_CONF_PRPENC_ROT_EN 0x00000004 +#define IC_CONF_PRPVF_EN 0x00000100 +#define IC_CONF_PRPVF_CSC1 0x00000200 +#define IC_CONF_PRPVF_CSC2 0x00000400 +#define IC_CONF_PRPVF_CMB 0x00000800 +#define IC_CONF_PRPVF_ROT_EN 0x00001000 +#define IC_CONF_PP_EN 0x00010000 +#define IC_CONF_PP_CSC1 0x00020000 +#define IC_CONF_PP_CSC2 0x00040000 +#define IC_CONF_PP_CMB 0x00080000 +#define IC_CONF_PP_ROT_EN 0x00100000 +#define IC_CONF_IC_GLB_LOC_A 0x10000000 +#define IC_CONF_KEY_COLOR_EN 0x20000000 +#define IC_CONF_RWS_EN 0x40000000 +#define IC_CONF_CSI_MEM_WR_EN 0x80000000 + +/* SDC Registers */ +#define SDC_COM_CONF (0xB4 + IPU_BASE) +#define SDC_GW_CTRL (0xB8 + IPU_BASE) +#define SDC_FG_POS (0xBC + IPU_BASE) +#define SDC_BG_POS (0xC0 + IPU_BASE) +#define SDC_CUR_POS (0xC4 + IPU_BASE) +#define SDC_PWM_CTRL (0xC8 + IPU_BASE) +#define SDC_CUR_MAP (0xCC + IPU_BASE) +#define SDC_HOR_CONF (0xD0 + IPU_BASE) +#define SDC_VER_CONF (0xD4 + IPU_BASE) +#define SDC_SHARP_CONF_1 (0xD8 + IPU_BASE) +#define SDC_SHARP_CONF_2 (0xDC + IPU_BASE) + +/* Register bits */ +#define SDC_COM_TFT_COLOR 0x00000001UL +#define SDC_COM_FG_EN 0x00000010UL +#define SDC_COM_GWSEL 0x00000020UL +#define SDC_COM_GLB_A 0x00000040UL +#define SDC_COM_KEY_COLOR_G 0x00000080UL +#define SDC_COM_BG_EN 0x00000200UL +#define SDC_COM_SHARP 0x00001000UL + +#define SDC_V_SYNC_WIDTH_L 0x00000001UL + +/* Display Interface registers */ +#define DI_DISP_IF_CONF (0x0124 + IPU_BASE) +#define DI_DISP_SIG_POL (0x0128 + IPU_BASE) +#define DI_SER_DISP1_CONF (0x012C + IPU_BASE) +#define DI_SER_DISP2_CONF (0x0130 + IPU_BASE) +#define DI_HSP_CLK_PER (0x0134 + IPU_BASE) +#define DI_DISP0_TIME_CONF_1 (0x0138 + IPU_BASE) +#define DI_DISP0_TIME_CONF_2 (0x013C + IPU_BASE) +#define DI_DISP0_TIME_CONF_3 (0x0140 + IPU_BASE) +#define DI_DISP1_TIME_CONF_1 (0x0144 + IPU_BASE) +#define DI_DISP1_TIME_CONF_2 (0x0148 + IPU_BASE) +#define DI_DISP1_TIME_CONF_3 (0x014C + IPU_BASE) +#define DI_DISP2_TIME_CONF_1 (0x0150 + IPU_BASE) +#define DI_DISP2_TIME_CONF_2 (0x0154 + IPU_BASE) +#define DI_DISP2_TIME_CONF_3 (0x0158 + IPU_BASE) +#define DI_DISP3_TIME_CONF (0x015C + IPU_BASE) +#define DI_DISP0_DB0_MAP (0x0160 + IPU_BASE) +#define DI_DISP0_DB1_MAP (0x0164 + IPU_BASE) +#define DI_DISP0_DB2_MAP (0x0168 + IPU_BASE) +#define DI_DISP0_CB0_MAP (0x016C + IPU_BASE) +#define DI_DISP0_CB1_MAP (0x0170 + IPU_BASE) +#define DI_DISP0_CB2_MAP (0x0174 + IPU_BASE) +#define DI_DISP1_DB0_MAP (0x0178 + IPU_BASE) +#define DI_DISP1_DB1_MAP (0x017C + IPU_BASE) +#define DI_DISP1_DB2_MAP (0x0180 + IPU_BASE) +#define DI_DISP1_CB0_MAP (0x0184 + IPU_BASE) +#define DI_DISP1_CB1_MAP (0x0188 + IPU_BASE) +#define DI_DISP1_CB2_MAP (0x018C + IPU_BASE) +#define DI_DISP2_DB0_MAP (0x0190 + IPU_BASE) +#define DI_DISP2_DB1_MAP (0x0194 + IPU_BASE) +#define DI_DISP2_DB2_MAP (0x0198 + IPU_BASE) +#define DI_DISP2_CB0_MAP (0x019C + IPU_BASE) +#define DI_DISP2_CB1_MAP (0x01A0 + IPU_BASE) +#define DI_DISP2_CB2_MAP (0x01A4 + IPU_BASE) +#define DI_DISP3_B0_MAP (0x01A8 + IPU_BASE) +#define DI_DISP3_B1_MAP (0x01AC + IPU_BASE) +#define DI_DISP3_B2_MAP (0x01B0 + IPU_BASE) +#define DI_DISP_ACC_CC (0x01B4 + IPU_BASE) +#define DI_DISP_LLA_CONF (0x01B8 + IPU_BASE) +#define DI_DISP_LLA_DATA (0x01BC + IPU_BASE) + +/* DI_DISP_SIG_POL bits */ +#define DI_D3_VSYNC_POL (1 << 28) +#define DI_D3_HSYNC_POL (1 << 27) +#define DI_D3_DRDY_SHARP_POL (1 << 26) +#define DI_D3_CLK_POL (1 << 25) +#define DI_D3_DATA_POL (1 << 24) + +/* DI_DISP_IF_CONF bits */ +#define DI_D3_CLK_IDLE (1 << 26) +#define DI_D3_CLK_SEL (1 << 25) +#define DI_D3_DATAMSK (1 << 24) + +#define IOMUX_PADNUM_MASK 0x1ff +#define IOMUX_GPIONUM_SHIFT 9 +#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT) + +#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK) + +#define IOMUX_MODE_L(pin, mode) IOMUX_MODE(((pin) + 0xc) ^ 3, mode) + +enum lcd_pin { + MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19), + MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20), + MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21), + MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22), + MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23), + + MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33), + MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34), + MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35), + + MX31_PIN_LD17 = IOMUX_PIN(0xff, 37), + MX31_PIN_LD16 = IOMUX_PIN(0xff, 38), + MX31_PIN_LD15 = IOMUX_PIN(0xff, 39), + MX31_PIN_LD14 = IOMUX_PIN(0xff, 40), + MX31_PIN_LD13 = IOMUX_PIN(0xff, 41), + MX31_PIN_LD12 = IOMUX_PIN(0xff, 42), + MX31_PIN_LD11 = IOMUX_PIN(0xff, 43), + MX31_PIN_LD10 = IOMUX_PIN(0xff, 44), + MX31_PIN_LD9 = IOMUX_PIN(0xff, 45), + MX31_PIN_LD8 = IOMUX_PIN(0xff, 46), + MX31_PIN_LD7 = IOMUX_PIN(0xff, 47), + MX31_PIN_LD6 = IOMUX_PIN(0xff, 48), + MX31_PIN_LD5 = IOMUX_PIN(0xff, 49), + MX31_PIN_LD4 = IOMUX_PIN(0xff, 50), + MX31_PIN_LD3 = IOMUX_PIN(0xff, 51), + MX31_PIN_LD2 = IOMUX_PIN(0xff, 52), + MX31_PIN_LD1 = IOMUX_PIN(0xff, 53), + MX31_PIN_LD0 = IOMUX_PIN(0xff, 54), +}; + +struct chan_param_mem_planar { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 res1:2; + u32 nsb:1; + u32 lnpb:6; + u32 ubo_l:11; + + u32 ubo_h:15; + u32 vbo_l:17; + + u32 vbo_h:9; + u32 res2:3; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 res6:30; +} __attribute__ ((packed)); + +struct chan_param_mem_interleaved { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 sce:1; + u32 res1:1; + u32 nsb:1; + u32 lnpb:6; + u32 sx:10; + u32 sy_l:1; + + u32 sy_h:9; + u32 ns:10; + u32 sm:10; + u32 sdx_l:3; + + u32 sdx_h:2; + u32 sdy:5; + u32 sdrx:1; + u32 sdry:1; + u32 sdr1:1; + u32 res2:2; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 scc:1; + u32 ofs0:5; + u32 ofs1:5; + u32 ofs2:5; + u32 ofs3:5; + u32 wid0:3; + u32 wid1:3; + u32 wid2:3; + + u32 wid3:3; + u32 dec_sel:1; + u32 res6:28; +} __attribute__ ((packed)); + +union chan_param_mem { + struct chan_param_mem_planar pp; + struct chan_param_mem_interleaved ip; +}; + +static inline u32 reg_read(unsigned long reg) +{ + return __REG(reg); +} + +static inline void reg_write(u32 value, unsigned long reg) +{ + __REG(reg) = value; +} + +/* + * sdc_init_panel() - initialize a synchronous LCD panel. + * @width: width of panel in pixels. + * @height: height of panel in pixels. + * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_init_panel(u16 width, u16 height, enum pixel_fmt pixel_fmt) +{ + u32 reg; + uint32_t old_conf; + + /* Init panel size and blanking periods */ + reg = ((H_SYNC_WIDTH - 1) << 26) | + ((u32)(width + H_START_WIDTH + H_END_WIDTH - 1) << 16); + reg_write(reg, SDC_HOR_CONF); + + reg = ((V_SYNC_WIDTH - 1) << 26) | SDC_V_SYNC_WIDTH_L | + ((u32)(height + V_START_WIDTH + V_END_WIDTH - 1) << 16); + reg_write(reg, SDC_VER_CONF); + + switch (PANEL_TYPE) { + case IPU_PANEL_SHARP_TFT: + reg_write(0x00FD0102L, SDC_SHARP_CONF_1); + reg_write(0x00F500F4L, SDC_SHARP_CONF_2); + reg_write(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + case IPU_PANEL_TFT: + reg_write(SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + default: + return -EINVAL; + } + + /* Init clocking */ + + /* + * Calculate divider: fractional part is 4 bits so simply multiple by + * 2^4 to get fractional part, as long as we stay under ~250MHz and on + * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz + */ + + reg_write((((IF_CLK_DIV / 8) - 1) << 22) | + IF_CLK_DIV, DI_DISP3_TIME_CONF); + + /* DI settings */ + old_conf = reg_read(DI_DISP_IF_CONF) & 0x78FFFFFF; + reg_write(old_conf | IF_CONF, DI_DISP_IF_CONF); + + old_conf = reg_read(DI_DISP_SIG_POL) & 0xE0FFFFFF; + reg_write(old_conf | SIG_POL, DI_DISP_SIG_POL); + + reg_write(fmt_cfg[pixel_fmt].b0, DI_DISP3_B0_MAP); + reg_write(fmt_cfg[pixel_fmt].b1, DI_DISP3_B1_MAP); + reg_write(fmt_cfg[pixel_fmt].b2, DI_DISP3_B2_MAP); + reg_write(reg_read(DI_DISP_ACC_CC) | + ((fmt_cfg[pixel_fmt].acc - 1) << 12), DI_DISP_ACC_CC); + + return 0; +} + +static void ipu_ch_param_set_size(union chan_param_mem *params, + uint32_t pixel_fmt, uint16_t width, + uint16_t height, uint16_t stride) +{ + params->pp.fw = width - 1; + params->pp.fh_l = height - 1; + params->pp.fh_h = (height - 1) >> 8; + params->pp.sl = stride - 1; + + /* See above, for further formats see the Linux driver */ + switch (pixel_fmt) { + case IPU_PIX_FMT_RGB565: + params->ip.bpp = 2; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 5; /* Green bit offset */ + params->ip.ofs2 = 11; /* Blue bit offset */ + params->ip.ofs3 = 16; /* Alpha bit offset */ + params->ip.wid0 = 4; /* Red bit width - 1 */ + params->ip.wid1 = 5; /* Green bit width - 1 */ + params->ip.wid2 = 4; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_RGB24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 16; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 0; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + default: + break; + } + + params->pp.nsb = 1; +} + +static void ipu_ch_param_set_buffer(union chan_param_mem *params, + void *buf0, void *buf1) +{ + params->pp.eba0 = (u32)buf0; + params->pp.eba1 = (u32)buf1; +} + +static void ipu_write_param_mem(uint32_t addr, uint32_t *data, + uint32_t num_words) +{ + for (; num_words > 0; num_words--) { + reg_write(addr, IPU_IMA_ADDR); + reg_write(*data++, IPU_IMA_DATA); + addr++; + if ((addr & 0x7) == 5) { + addr &= ~0x7; /* set to word 0 */ + addr += 8; /* increment to next row */ + } + } +} + +static uint32_t bpp_to_pixfmt(int bpp) +{ + switch (bpp) { + case 16: + return IPU_PIX_FMT_RGB565; + default: + return 0; + } +} + +static uint32_t dma_param_addr(enum ipu_channel channel) +{ + /* Channel Parameter Memory */ + return 0x10000 | (channel << 4); +} + +static void ipu_init_channel_buffer(enum ipu_channel channel, void *fbmem) +{ + union chan_param_mem params = {}; + uint32_t reg; + uint32_t stride_bytes; + + stride_bytes = (XRES * ((BIT_PER_PIXEL + 7) / 8) + 3) & ~3; + + /* Build parameter memory data for DMA channel */ + ipu_ch_param_set_size(¶ms, bpp_to_pixfmt(BIT_PER_PIXEL), + XRES, YRES, stride_bytes); + ipu_ch_param_set_buffer(¶ms, fbmem, NULL); + params.pp.bam = 0; + /* Some channels (rotation) have restriction on burst length */ + + switch (channel) { + case IDMAC_SDC_0: + /* In original code only IPU_PIX_FMT_RGB565 was setting burst */ + params.pp.npb = 16 - 1; + break; + default: + break; + } + + ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10); + + /* Disable double-buffering */ + reg = reg_read(IPU_CHA_DB_MODE_SEL); + reg &= ~(1UL << channel); + reg_write(reg, IPU_CHA_DB_MODE_SEL); +} + +static void ipu_channel_set_priority(enum ipu_channel channel, + int prio) +{ + u32 reg = reg_read(IDMAC_CHA_PRI); + + if (prio) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + reg_write(reg, IDMAC_CHA_PRI); +} + +/* + * ipu_enable_channel() - enable an IPU channel. + * @channel: channel ID. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_enable_channel(enum ipu_channel channel) +{ + uint32_t reg; + + /* Reset to buffer 0 */ + reg_write(1UL << channel, IPU_CHA_CUR_BUF); + + switch (channel) { + case IDMAC_SDC_0: + ipu_channel_set_priority(channel, 1); + break; + default: + break; + } + + reg = reg_read(IDMAC_CHA_EN); + reg_write(reg | (1UL << channel), IDMAC_CHA_EN); + + return 0; +} + +static int ipu_update_channel_buffer(enum ipu_channel channel, void *buf) +{ + uint32_t reg; + + reg = reg_read(IPU_CHA_BUF0_RDY); + if (reg & (1UL << channel)) + return -EACCES; + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */ + reg_write(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR); + reg_write((u32)buf, IPU_IMA_DATA); + + return 0; +} + +static int idmac_tx_submit(enum ipu_channel channel, void *buf) +{ + int ret; + + ipu_init_channel_buffer(channel, buf); + + + /* ipu_idmac.c::ipu_submit_channel_buffers() */ + ret = ipu_update_channel_buffer(channel, buf); + if (ret < 0) + return ret; + + /* ipu_idmac.c::ipu_select_buffer() */ + /* Mark buffer 0 as ready. */ + reg_write(1UL << channel, IPU_CHA_BUF0_RDY); + + + ret = ipu_enable_channel(channel); + return ret; +} + +static void sdc_enable_channel(void *fbmem) +{ + int ret; + u32 reg; + + ret = idmac_tx_submit(IDMAC_SDC_0, fbmem); + + /* mx3fb.c::sdc_fb_init() */ + if (ret >= 0) { + reg = reg_read(SDC_COM_CONF); + reg_write(reg | SDC_COM_BG_EN, SDC_COM_CONF); + } + + /* + * Attention! Without this msleep the channel keeps generating + * interrupts. Next sdc_set_brightness() is going to be called + * from mx3fb_blank(). + */ + msleep(2); +} + +/* + * mx3fb_set_par() - set framebuffer parameters and change the operating mode. + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_par(void) +{ + int ret; + + ret = sdc_init_panel(XRES, YRES, PIXEL_FMT); + if (ret < 0) + return ret; + + reg_write((H_START_WIDTH << 16) | V_START_WIDTH, SDC_BG_POS); + + return 0; +} + +/* References in this function refer to respective Linux kernel sources */ +void lcd_enable(void) +{ + u32 reg; + + /* pcm037.c::mxc_board_init() */ + + /* Display Interface #3 */ + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD0, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD1, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD2, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD3, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD4, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD5, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD6, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD7, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD8, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD9, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD10, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD11, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD12, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD13, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD14, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD15, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD16, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD17, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_VSYNC3, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_HSYNC, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_FPSHIFT, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_DRDY0, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_REV, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_CONTRAST, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_SPL, MUX_CTL_FUNC)); + mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_CLS, MUX_CTL_FUNC)); + + + /* ipu_idmac.c::ipu_probe() */ + + /* Start the clock */ + __REG(CCM_CGR1) = __REG(CCM_CGR1) | (3 << 22); + + + /* ipu_idmac.c::ipu_idmac_init() */ + + /* Service request counter to maximum - shouldn't be needed */ + reg_write(0x00000070, IDMAC_CONF); + + + /* ipu_idmac.c::ipu_init_channel() */ + + /* Enable IPU sub modules */ + reg = reg_read(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN; + reg_write(reg, IPU_CONF); + + + /* mx3fb.c::init_fb_chan() */ + + /* set Display Interface clock period */ + reg_write(0x00100010L, DI_HSP_CLK_PER); + /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ + + + /* mx3fb.c::sdc_set_brightness() */ + + /* This might be board-specific */ + reg_write(0x03000000UL | 255 << 16, SDC_PWM_CTRL); + + + /* mx3fb.c::sdc_set_global_alpha() */ + + /* Use global - not per-pixel - Alpha-blending */ + reg = reg_read(SDC_GW_CTRL) & 0x00FFFFFFL; + reg_write(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL); + + reg = reg_read(SDC_COM_CONF); + reg_write(reg | SDC_COM_GLB_A, SDC_COM_CONF); + + + /* mx3fb.c::sdc_set_color_key() */ + + /* Disable colour-keying for background */ + reg = reg_read(SDC_COM_CONF) & + ~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G); + reg_write(reg, SDC_COM_CONF); + + + mx3fb_set_par(); + + sdc_enable_channel(lcd_base); + + /* + * Linux driver calls sdc_set_brightness() here again, + * once is enough for us + */ +} + +void lcd_ctrl_init(void *lcdbase) +{ + u32 mem_len = XRES * YRES * BIT_PER_PIXEL / 8; + /* + * We rely on lcdbase being a physical address, i.e., either MMU off, + * or 1-to-1 mapping. Might want to add some virt2phys here. + */ + if (!lcdbase) + return; + + memset(lcdbase, 0, mem_len); +} + +ulong calc_fbsize(void) +{ + return ((panel_info.vl_col * panel_info.vl_row * + NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE; +} + +int overwrite_console(void) +{ + /* Keep stdout / stderr on serial, our LCD is for splashscreen only */ + return 1; +} diff --git a/drivers/video/s6e63d6.c b/drivers/video/s6e63d6.c new file mode 100644 index 00000000000..d163506634f --- /dev/null +++ b/drivers/video/s6e63d6.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <spi.h> +#include <s6e63d6.h> + +/* + * Each transfer is performed as: + * 1. chip-select active + * 2. send 8-bit start code + * 3. send 16-bit data + * 4. chip-select inactive + */ +static int send_word(struct s6e63d6 *data, u8 rs, u16 word) +{ + /* + * The start byte looks like (binary): + * 01110<ID><RS><R/W> + * RS is 0 for index or 1 for data, and R/W is 0 for write. + */ + u32 buf8 = 0x70 | data->id | (rs & 2); + u32 buf16 = cpu_to_le16(word); + u32 buf_in; + int err; + + err = spi_xfer(data->slave, 8, &buf8, &buf_in, SPI_XFER_BEGIN); + if (err) + return err; + + return spi_xfer(data->slave, 16, &buf16, &buf_in, SPI_XFER_END); +} + +/* Index and param differ in Register Select bit */ +int s6e63d6_index(struct s6e63d6 *data, u8 idx) +{ + return send_word(data, 0, idx); +} + +int s6e63d6_param(struct s6e63d6 *data, u16 param) +{ + return send_word(data, 2, param); +} + +int s6e63d6_init(struct s6e63d6 *data) +{ + if (data->id != 0 && data->id != 4) { + printf("s6e63d6: invalid ID %u\n", data->id); + return 1; + } + + data->slave = spi_setup_slave(data->bus, data->cs, 100000, SPI_MODE_3); + if (!data->slave) + return 1; + + return 0; +} diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h index 3cdaa024787..a8a05c873de 100644 --- a/include/asm-arm/arch-mx31/mx31-regs.h +++ b/include/asm-arm/arch-mx31/mx31-regs.h @@ -134,7 +134,14 @@ #define MUX_CTL_CSPI2_SS0 0x85 #define MUX_CTL_CSPI2_SS1 0x86 #define MUX_CTL_CSPI2_SS2 0x87 +#define MUX_CTL_CSPI1_SS2 0x88 +#define MUX_CTL_CSPI1_SCLK 0x89 +#define MUX_CTL_CSPI1_SPI_RDY 0x8a #define MUX_CTL_CSPI2_MOSI 0x8b +#define MUX_CTL_CSPI1_MOSI 0x8c +#define MUX_CTL_CSPI1_MISO 0x8d +#define MUX_CTL_CSPI1_SS0 0x8e +#define MUX_CTL_CSPI1_SS1 0x8f /* * Helper macros for the MUX_[contact name]__[pin function] macros @@ -160,6 +167,15 @@ IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC) #define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC) +#define MUX_CSPI1_SS0__CSPI1_SS0_B IOMUX_MODE(MUX_CTL_CSPI1_SS0, MUX_CTL_FUNC) +#define MUX_CSPI1_SS1__CSPI1_SS1_B IOMUX_MODE(MUX_CTL_CSPI1_SS1, MUX_CTL_FUNC) +#define MUX_CSPI1_SS2__CSPI1_SS2_B IOMUX_MODE(MUX_CTL_CSPI1_SS2, MUX_CTL_FUNC) +#define MUX_CSPI1_MOSI__CSPI1_MOSI IOMUX_MODE(MUX_CTL_CSPI1_MOSI, MUX_CTL_FUNC) +#define MUX_CSPI1_MISO__CSPI1_MISO IOMUX_MODE(MUX_CTL_CSPI1_MISO, MUX_CTL_FUNC) +#define MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B \ + IOMUX_MODE(MUX_CTL_CSPI1_SPI_RDY, MUX_CTL_FUNC) +#define MUX_CSPI1_SCLK__CSPI1_CLK IOMUX_MODE(MUX_CTL_CSPI1_SCLK, MUX_CTL_FUNC) + #define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1) #define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1) diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h index 0552c27ce65..1d475dde7ef 100644 --- a/include/asm-arm/arch-mx31/mx31.h +++ b/include/asm-arm/arch-mx31/mx31.h @@ -27,4 +27,24 @@ extern u32 mx31_get_ipg_clk(void); extern void mx31_gpio_mux(unsigned long mode); +enum mx31_gpio_direction { + MX31_GPIO_DIRECTION_IN, + MX31_GPIO_DIRECTION_OUT, +}; + +#ifdef CONFIG_MX31_GPIO +extern int mx31_gpio_direction(unsigned int gpio, + enum mx31_gpio_direction direction); +extern void mx31_gpio_set(unsigned int gpio, unsigned int value); +#else +static inline int mx31_gpio_direction(unsigned int gpio, + enum mx31_gpio_direction direction) +{ + return 1; +} +static inline void mx31_gpio_set(unsigned int gpio, unsigned int value) +{ +} +#endif + #endif /* __ASM_ARCH_MX31_H */ diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index f0d28ee05f3..2dd9e92f878 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -178,4 +178,27 @@ #undef CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_DEV "nor0" +/* EET platform additions */ +#ifdef CONFIG_IMX31_PHYCORE_EET +#define BOARD_LATE_INIT + +#define CONFIG_MX31_GPIO 1 + +#define CONFIG_HARD_SPI 1 +#define CONFIG_MXC_SPI 1 +#define CONFIG_CMD_SPI + +#define CONFIG_S6E63D6 1 + +#define CONFIG_LCD 1 +#define CONFIG_VIDEO_MX3 1 +#define CONFIG_SYS_WHITE_ON_BLACK 1 +#define LCD_BPP LCD_COLOR8 +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 + +#define CONFIG_SPLASH_SCREEN 1 +#define CONFIG_CMD_BMP 1 +#endif + #endif /* __CONFIG_H */ diff --git a/include/lcd.h b/include/lcd.h index 512221e9c46..f054cac05f7 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -148,14 +148,6 @@ typedef struct vidinfo { extern vidinfo_t panel_info; -#elif defined(CONFIG_MCC200) -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 160) */ - ushort vl_row; /* Number of rows (i.e. 100) */ - - u_char vl_bpix; /* Bits per pixel, 0 = 1 */ -} vidinfo_t; - #elif defined(CONFIG_ATMEL_LCD) typedef struct vidinfo { @@ -183,6 +175,19 @@ typedef struct vidinfo { extern vidinfo_t panel_info; +#else + +typedef struct vidinfo { + ushort vl_col; /* Number of columns (i.e. 160) */ + ushort vl_row; /* Number of rows (i.e. 100) */ + + u_char vl_bpix; /* Bits per pixel, 0 = 1 */ + + ushort *cmap; /* Pointer to the colormap */ + + void *priv; /* Pointer to driver-specific data */ +} vidinfo_t; + #endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */ /* Video functions */ diff --git a/include/s6e63d6.h b/include/s6e63d6.h new file mode 100644 index 00000000000..9f17fc0fbf8 --- /dev/null +++ b/include/s6e63d6.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2009 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _S6E63D6_H_ +#define _S6E63D6_H_ + +struct s6e63d6 { + unsigned int bus; + unsigned int cs; + unsigned int id; + struct spi_slave *slave; +}; + +extern int s6e63d6_init(struct s6e63d6 *data); +extern int s6e63d6_index(struct s6e63d6 *data, u8 idx); +extern int s6e63d6_param(struct s6e63d6 *data, u16 param); + +#endif |