summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/omap-common/timer.c9
-rw-r--r--arch/arm/cpu/armv7/omap4/board.c11
-rw-r--r--arch/arm/include/asm/arch-omap3/cpu.h3
-rw-r--r--arch/arm/include/asm/arch-omap3/i2c.h4
-rw-r--r--arch/arm/include/asm/arch-omap4/cpu.h3
-rw-r--r--arch/arm/include/asm/arch-omap4/mux_omap4.h344
-rw-r--r--arch/arm/include/asm/arch-omap4/omap4.h2
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h1
-rw-r--r--board/ti/panda/panda.c26
-rw-r--r--board/ti/panda/panda.h265
-rw-r--r--board/ti/sdp4430/sdp.c26
-rw-r--r--board/ti/sdp4430/sdp.h265
-rw-r--r--drivers/i2c/omap24xx_i2c.c31
-rw-r--r--drivers/i2c/omap24xx_i2c.h4
-rw-r--r--drivers/power/Makefile1
-rw-r--r--drivers/power/twl6030.c78
-rw-r--r--drivers/usb/musb/omap3.c16
-rw-r--r--drivers/usb/musb/omap3.h3
-rw-r--r--include/configs/omap4_panda.h26
-rw-r--r--include/configs/omap4_sdp4430.h26
-rw-r--r--include/twl6030.h91
21 files changed, 1210 insertions, 25 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c
index 69e285ff1dd..6b8cf7ba2dc 100644
--- a/arch/arm/cpu/armv7/omap-common/timer.c
+++ b/arch/arm/cpu/armv7/omap-common/timer.c
@@ -41,12 +41,8 @@ static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE;
/*
* Nothing really to do with interrupts, just starts up a counter.
- * We run the counter with 13MHz, divided by 8, resulting in timer
- * frequency of 1.625MHz. With 32bit counter register, counter
- * overflows in ~44min
*/
-/* 13MHz / 8 = 1.625MHz */
#define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV))
#define TIMER_LOAD_VAL 0xffffffff
@@ -84,11 +80,6 @@ void set_timer(ulong t)
/* delay x useconds */
void __udelay(unsigned long usec)
{
-#if defined(CONFIG_OMAP44XX)
- /* TODO temporary hack until OMAP4 clock setup routines are present */
- if (usec > 1000)
- usec = usec/1000;
-#endif
long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
unsigned long now, last = readl(&timer_base->tcrr);
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 5bf717303d8..2e80d1fbf73 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -88,3 +88,14 @@ int checkboard(void)
return 0;
}
+/*
+* This function is called by start_armboot. You can reliably use static
+* data. Any boot-time function that require static data should be
+* called from here
+*/
+int arch_cpu_init(void)
+{
+ set_muxconf_regs();
+ return 0;
+}
+
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index c072c27bbf0..390b0079451 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -483,4 +483,7 @@ struct pm {
#define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000)
#define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000)
+/* MUSB base */
+#define MUSB_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap3/i2c.h b/arch/arm/include/asm/arch-omap3/i2c.h
index 7a4a73aa913..d2e7488fd1b 100644
--- a/arch/arm/include/asm/arch-omap3/i2c.h
+++ b/arch/arm/include/asm/arch-omap3/i2c.h
@@ -34,7 +34,9 @@ struct i2c {
unsigned short stat; /* 0x08 */
unsigned short res3;
unsigned short iv; /* 0x0C */
- unsigned short res4[3];
+ unsigned short res4;
+ unsigned short syss; /* 0x10 */
+ unsigned short res4a;
unsigned short buf; /* 0x14 */
unsigned short res5;
unsigned short cnt; /* 0x18 */
diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h
index c056b9501b8..7d5748acd4d 100644
--- a/arch/arm/include/asm/arch-omap4/cpu.h
+++ b/arch/arm/include/asm/arch-omap4/cpu.h
@@ -139,4 +139,7 @@ struct watchdog {
#define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000)
#define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000)
+/* MUSB base */
+#define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000)
+
#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap4/mux_omap4.h b/arch/arm/include/asm/arch-omap4/mux_omap4.h
new file mode 100644
index 00000000000..019574b09f5
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/mux_omap4.h
@@ -0,0 +1,344 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_OMAP4_H_
+#define _MUX_OMAP4_H_
+
+#include <asm/types.h>
+
+struct pad_conf_entry {
+
+ u16 offset;
+
+ u16 val;
+
+} __attribute__ ((packed));
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD (1 << 12)
+#define OFF_PU (3 << 12)
+#define OFF_OUT_PTD (0 << 10)
+#define OFF_OUT_PTU (2 << 10)
+#define OFF_IN (1 << 10)
+#define OFF_OUT (0 << 10)
+#define OFF_EN (1 << 9)
+#else
+#define OFF_PD (0 << 12)
+#define OFF_PU (0 << 12)
+#define OFF_OUT_PTD (0 << 10)
+#define OFF_OUT_PTU (0 << 10)
+#define OFF_IN (0 << 10)
+#define OFF_OUT (0 << 10)
+#define OFF_EN (0 << 9)
+#endif
+
+#define IEN (1 << 8)
+#define IDIS (0 << 8)
+#define PTU (3 << 3)
+#define PTD (1 << 3)
+#define EN (1 << 3)
+#define DIS (0 << 3)
+
+#define M0 0
+#define M1 1
+#define M2 2
+#define M3 3
+#define M4 4
+#define M5 5
+#define M6 6
+#define M7 7
+
+#define SAFE_MODE M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD 0
+#define OFF_IN_PU 0
+#define OFF_OUT_PD 0
+#define OFF_OUT_PU 0
+#endif
+
+#define CORE_REVISION 0x0000
+#define CORE_HWINFO 0x0004
+#define CORE_SYSCONFIG 0x0010
+#define GPMC_AD0 0x0040
+#define GPMC_AD1 0x0042
+#define GPMC_AD2 0x0044
+#define GPMC_AD3 0x0046
+#define GPMC_AD4 0x0048
+#define GPMC_AD5 0x004A
+#define GPMC_AD6 0x004C
+#define GPMC_AD7 0x004E
+#define GPMC_AD8 0x0050
+#define GPMC_AD9 0x0052
+#define GPMC_AD10 0x0054
+#define GPMC_AD11 0x0056
+#define GPMC_AD12 0x0058
+#define GPMC_AD13 0x005A
+#define GPMC_AD14 0x005C
+#define GPMC_AD15 0x005E
+#define GPMC_A16 0x0060
+#define GPMC_A17 0x0062
+#define GPMC_A18 0x0064
+#define GPMC_A19 0x0066
+#define GPMC_A20 0x0068
+#define GPMC_A21 0x006A
+#define GPMC_A22 0x006C
+#define GPMC_A23 0x006E
+#define GPMC_A24 0x0070
+#define GPMC_A25 0x0072
+#define GPMC_NCS0 0x0074
+#define GPMC_NCS1 0x0076
+#define GPMC_NCS2 0x0078
+#define GPMC_NCS3 0x007A
+#define GPMC_NWP 0x007C
+#define GPMC_CLK 0x007E
+#define GPMC_NADV_ALE 0x0080
+#define GPMC_NOE 0x0082
+#define GPMC_NWE 0x0084
+#define GPMC_NBE0_CLE 0x0086
+#define GPMC_NBE1 0x0088
+#define GPMC_WAIT0 0x008A
+#define GPMC_WAIT1 0x008C
+#define C2C_DATA11 0x008E
+#define C2C_DATA12 0x0090
+#define C2C_DATA13 0x0092
+#define C2C_DATA14 0x0094
+#define C2C_DATA15 0x0096
+#define HDMI_HPD 0x0098
+#define HDMI_CEC 0x009A
+#define HDMI_DDC_SCL 0x009C
+#define HDMI_DDC_SDA 0x009E
+#define CSI21_DX0 0x00A0
+#define CSI21_DY0 0x00A2
+#define CSI21_DX1 0x00A4
+#define CSI21_DY1 0x00A6
+#define CSI21_DX2 0x00A8
+#define CSI21_DY2 0x00AA
+#define CSI21_DX3 0x00AC
+#define CSI21_DY3 0x00AE
+#define CSI21_DX4 0x00B0
+#define CSI21_DY4 0x00B2
+#define CSI22_DX0 0x00B4
+#define CSI22_DY0 0x00B6
+#define CSI22_DX1 0x00B8
+#define CSI22_DY1 0x00BA
+#define CAM_SHUTTER 0x00BC
+#define CAM_STROBE 0x00BE
+#define CAM_GLOBALRESET 0x00C0
+#define USBB1_ULPITLL_CLK 0x00C2
+#define USBB1_ULPITLL_STP 0x00C4
+#define USBB1_ULPITLL_DIR 0x00C6
+#define USBB1_ULPITLL_NXT 0x00C8
+#define USBB1_ULPITLL_DAT0 0x00CA
+#define USBB1_ULPITLL_DAT1 0x00CC
+#define USBB1_ULPITLL_DAT2 0x00CE
+#define USBB1_ULPITLL_DAT3 0x00D0
+#define USBB1_ULPITLL_DAT4 0x00D2
+#define USBB1_ULPITLL_DAT5 0x00D4
+#define USBB1_ULPITLL_DAT6 0x00D6
+#define USBB1_ULPITLL_DAT7 0x00D8
+#define USBB1_HSIC_DATA 0x00DA
+#define USBB1_HSIC_STROBE 0x00DC
+#define USBC1_ICUSB_DP 0x00DE
+#define USBC1_ICUSB_DM 0x00E0
+#define SDMMC1_CLK 0x00E2
+#define SDMMC1_CMD 0x00E4
+#define SDMMC1_DAT0 0x00E6
+#define SDMMC1_DAT1 0x00E8
+#define SDMMC1_DAT2 0x00EA
+#define SDMMC1_DAT3 0x00EC
+#define SDMMC1_DAT4 0x00EE
+#define SDMMC1_DAT5 0x00F0
+#define SDMMC1_DAT6 0x00F2
+#define SDMMC1_DAT7 0x00F4
+#define ABE_MCBSP2_CLKX 0x00F6
+#define ABE_MCBSP2_DR 0x00F8
+#define ABE_MCBSP2_DX 0x00FA
+#define ABE_MCBSP2_FSX 0x00FC
+#define ABE_MCBSP1_CLKX 0x00FE
+#define ABE_MCBSP1_DR 0x0100
+#define ABE_MCBSP1_DX 0x0102
+#define ABE_MCBSP1_FSX 0x0104
+#define ABE_PDM_UL_DATA 0x0106
+#define ABE_PDM_DL_DATA 0x0108
+#define ABE_PDM_FRAME 0x010A
+#define ABE_PDM_LB_CLK 0x010C
+#define ABE_CLKS 0x010E
+#define ABE_DMIC_CLK1 0x0110
+#define ABE_DMIC_DIN1 0x0112
+#define ABE_DMIC_DIN2 0x0114
+#define ABE_DMIC_DIN3 0x0116
+#define UART2_CTS 0x0118
+#define UART2_RTS 0x011A
+#define UART2_RX 0x011C
+#define UART2_TX 0x011E
+#define HDQ_SIO 0x0120
+#define I2C1_SCL 0x0122
+#define I2C1_SDA 0x0124
+#define I2C2_SCL 0x0126
+#define I2C2_SDA 0x0128
+#define I2C3_SCL 0x012A
+#define I2C3_SDA 0x012C
+#define I2C4_SCL 0x012E
+#define I2C4_SDA 0x0130
+#define MCSPI1_CLK 0x0132
+#define MCSPI1_SOMI 0x0134
+#define MCSPI1_SIMO 0x0136
+#define MCSPI1_CS0 0x0138
+#define MCSPI1_CS1 0x013A
+#define MCSPI1_CS2 0x013C
+#define MCSPI1_CS3 0x013E
+#define UART3_CTS_RCTX 0x0140
+#define UART3_RTS_SD 0x0142
+#define UART3_RX_IRRX 0x0144
+#define UART3_TX_IRTX 0x0146
+#define SDMMC5_CLK 0x0148
+#define SDMMC5_CMD 0x014A
+#define SDMMC5_DAT0 0x014C
+#define SDMMC5_DAT1 0x014E
+#define SDMMC5_DAT2 0x0150
+#define SDMMC5_DAT3 0x0152
+#define MCSPI4_CLK 0x0154
+#define MCSPI4_SIMO 0x0156
+#define MCSPI4_SOMI 0x0158
+#define MCSPI4_CS0 0x015A
+#define UART4_RX 0x015C
+#define UART4_TX 0x015E
+#define USBB2_ULPITLL_CLK 0x0160
+#define USBB2_ULPITLL_STP 0x0162
+#define USBB2_ULPITLL_DIR 0x0164
+#define USBB2_ULPITLL_NXT 0x0166
+#define USBB2_ULPITLL_DAT0 0x0168
+#define USBB2_ULPITLL_DAT1 0x016A
+#define USBB2_ULPITLL_DAT2 0x016C
+#define USBB2_ULPITLL_DAT3 0x016E
+#define USBB2_ULPITLL_DAT4 0x0170
+#define USBB2_ULPITLL_DAT5 0x0172
+#define USBB2_ULPITLL_DAT6 0x0174
+#define USBB2_ULPITLL_DAT7 0x0176
+#define USBB2_HSIC_DATA 0x0178
+#define USBB2_HSIC_STROBE 0x017A
+#define UNIPRO_TX0 0x017C
+#define UNIPRO_TY0 0x017E
+#define UNIPRO_TX1 0x0180
+#define UNIPRO_TY1 0x0182
+#define UNIPRO_TX2 0x0184
+#define UNIPRO_TY2 0x0186
+#define UNIPRO_RX0 0x0188
+#define UNIPRO_RY0 0x018A
+#define UNIPRO_RX1 0x018C
+#define UNIPRO_RY1 0x018E
+#define UNIPRO_RX2 0x0190
+#define UNIPRO_RY2 0x0192
+#define USBA0_OTG_CE 0x0194
+#define USBA0_OTG_DP 0x0196
+#define USBA0_OTG_DM 0x0198
+#define FREF_CLK1_OUT 0x019A
+#define FREF_CLK2_OUT 0x019C
+#define SYS_NIRQ1 0x019E
+#define SYS_NIRQ2 0x01A0
+#define SYS_BOOT0 0x01A2
+#define SYS_BOOT1 0x01A4
+#define SYS_BOOT2 0x01A6
+#define SYS_BOOT3 0x01A8
+#define SYS_BOOT4 0x01AA
+#define SYS_BOOT5 0x01AC
+#define DPM_EMU0 0x01AE
+#define DPM_EMU1 0x01B0
+#define DPM_EMU2 0x01B2
+#define DPM_EMU3 0x01B4
+#define DPM_EMU4 0x01B6
+#define DPM_EMU5 0x01B8
+#define DPM_EMU6 0x01BA
+#define DPM_EMU7 0x01BC
+#define DPM_EMU8 0x01BE
+#define DPM_EMU9 0x01C0
+#define DPM_EMU10 0x01C2
+#define DPM_EMU11 0x01C4
+#define DPM_EMU12 0x01C6
+#define DPM_EMU13 0x01C8
+#define DPM_EMU14 0x01CA
+#define DPM_EMU15 0x01CC
+#define DPM_EMU16 0x01CE
+#define DPM_EMU17 0x01D0
+#define DPM_EMU18 0x01D2
+#define DPM_EMU19 0x01D4
+#define WAKEUPEVENT_0 0x01D8
+#define WAKEUPEVENT_1 0x01DC
+#define WAKEUPEVENT_2 0x01E0
+#define WAKEUPEVENT_3 0x01E4
+#define WAKEUPEVENT_4 0x01E8
+#define WAKEUPEVENT_5 0x01EC
+#define WAKEUPEVENT_6 0x01F0
+
+#define WKUP_REVISION 0x0000
+#define WKUP_HWINFO 0x0004
+#define WKUP_SYSCONFIG 0x0010
+#define PAD0_SIM_IO 0x0040
+#define PAD1_SIM_CLK 0x0042
+#define PAD0_SIM_RESET 0x0044
+#define PAD1_SIM_CD 0x0046
+#define PAD0_SIM_PWRCTRL 0x0048
+#define PAD1_SR_SCL 0x004A
+#define PAD0_SR_SDA 0x004C
+#define PAD1_FREF_XTAL_IN 0x004E
+#define PAD0_FREF_SLICER_IN 0x0050
+#define PAD1_FREF_CLK_IOREQ 0x0052
+#define PAD0_FREF_CLK0_OUT 0x0054
+#define PAD1_FREF_CLK3_REQ 0x0056
+#define PAD0_FREF_CLK3_OUT 0x0058
+#define PAD1_FREF_CLK4_REQ 0x005A
+#define PAD0_FREF_CLK4_OUT 0x005C
+#define PAD1_SYS_32K 0x005E
+#define PAD0_SYS_NRESPWRON 0x0060
+#define PAD1_SYS_NRESWARM 0x0062
+#define PAD0_SYS_PWR_REQ 0x0064
+#define PAD1_SYS_PWRON_RESET 0x0066
+#define PAD0_SYS_BOOT6 0x0068
+#define PAD1_SYS_BOOT7 0x006A
+#define PAD0_JTAG_NTRST 0x006C
+#define PAD1_JTAG_TCK 0x006D
+#define PAD0_JTAG_RTCK 0x0070
+#define PAD1_JTAG_TMS_TMSC 0x0072
+#define PAD0_JTAG_TDI 0x0074
+#define PAD1_JTAG_TDO 0x0076
+#define PADCONF_WAKEUPEVENT_0 0x007C
+#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0
+#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4
+#define PADCONF_MODE 0x05A8
+#define CONTROL_XTAL_OSCILLATOR 0x05AC
+#define CONTROL_CONTROL_I2C_2 0x0604
+#define CONTROL_CONTROL_JTAG 0x0608
+#define CONTROL_CONTROL_SYS 0x060C
+#define CONTROL_SPARE_RW 0x0614
+#define CONTROL_SPARE_R 0x0618
+#define CONTROL_SPARE_R_C0 0x061C
+
+#endif /* _MUX_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index 5243ea8e7fe..79ff22cf316 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -44,6 +44,8 @@
/* CONTROL */
#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
+#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000)
+#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000)
/* UART */
#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index c6fab002fb9..ad0c640dfd8 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -32,6 +32,7 @@ void gpmc_init(void);
void watchdog_init(void);
u32 get_device_type(void);
void invalidate_dcache(u32);
+void set_muxconf_regs(void);
extern const struct omap_sysinfo sysinfo;
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 917bbec5ec1..1b8153ba825 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -24,6 +24,8 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
+#include "panda.h"
+
DECLARE_GLOBAL_DATA_PTR;
const struct omap_sysinfo sysinfo = {
@@ -61,3 +63,27 @@ int misc_init_r(void)
{
return 0;
}
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+ for (i = 0; i < size; i++, pad++)
+ writew(pad->val, base + pad->offset);
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the board.
+ */
+void set_muxconf_regs(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
+ sizeof(core_padconf_array) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
+ sizeof(wkup_padconf_array) /
+ sizeof(struct pad_conf_entry));
+}
diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h
new file mode 100644
index 00000000000..8f6a6b1a6b8
--- /dev/null
+++ b/board/ti/panda/panda.h
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PANDA_H_
+#define _PANDA_H_
+
+#include <asm/io.h>
+#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array[] = {
+ {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+ {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+ {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+ {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+ {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+ {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+ {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+ {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+ {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
+ {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
+ {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
+ {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */
+ {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */
+ {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */
+ {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */
+ {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */
+ {GPMC_A16, (M3)}, /* gpio_40 */
+ {GPMC_A17, (PTD | M3)}, /* gpio_41 */
+ {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */
+ {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
+ {GPMC_A20, (IEN | M3)}, /* gpio_44 */
+ {GPMC_A21, (M3)}, /* gpio_45 */
+ {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
+ {GPMC_A24, (PTD | M3)}, /* gpio_48 */
+ {GPMC_A25, (PTD | M3)}, /* gpio_49 */
+ {GPMC_NCS0, (M3)}, /* gpio_50 */
+ {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */
+ {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */
+ {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */
+ {GPMC_NWP, (M3)}, /* gpio_54 */
+ {GPMC_CLK, (PTD | M3)}, /* gpio_55 */
+ {GPMC_NADV_ALE, (M3)}, /* gpio_56 */
+ {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+ {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+ {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
+ {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
+ {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
+ {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {C2C_DATA11, (PTD | M3)}, /* gpio_100 */
+ {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
+ {C2C_DATA14, (M1)}, /* dsi2_te0 */
+ {C2C_DATA15, (PTD | M3)}, /* gpio_104 */
+ {HDMI_HPD, (M0)}, /* hdmi_hpd */
+ {HDMI_CEC, (M0)}, /* hdmi_cec */
+ {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */
+ {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */
+ {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
+ {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
+ {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
+ {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
+ {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
+ {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
+ {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */
+ {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */
+ {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */
+ {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */
+ {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
+ {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
+ {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
+ {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
+ {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
+ {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
+ {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
+ {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+ {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
+ {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
+ {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
+ {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
+ {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
+ {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
+ {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
+ {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
+ {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
+ {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
+ {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
+ {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
+ {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+ {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+ {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+ {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+ {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+ {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+ {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+ {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+ {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+ {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+ {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
+ {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
+ {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
+ {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
+ {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
+ {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
+ {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
+ {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
+ {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
+ {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
+ {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
+ {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
+ {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
+ {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
+ {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
+ {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
+ {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
+ {UART2_RTS, (M0)}, /* uart2_rts */
+ {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
+ {UART2_TX, (M0)}, /* uart2_tx */
+ {HDQ_SIO, (M3)}, /* gpio_127 */
+ {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+ {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+ {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+ {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+ {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+ {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+ {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+ {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
+ {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
+ {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
+ {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
+ {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
+ {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
+ {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
+ {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
+ {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+ {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+ {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+ {UART3_TX_IRTX, (M0)}, /* uart3_tx */
+ {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
+ {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
+ {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
+ {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
+ {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
+ {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
+ {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
+ {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
+ {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
+ {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
+ {UART4_RX, (IEN | M0)}, /* uart4_rx */
+ {UART4_TX, (M0)}, /* uart4_tx */
+ {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
+ {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
+ {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
+ {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */
+ {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */
+ {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */
+ {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */
+ {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */
+ {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */
+ {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */
+ {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
+ {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
+ {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
+ {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
+ {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
+ {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
+ {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */
+ {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */
+ {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
+ {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
+ {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
+ {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */
+ {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */
+ {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */
+ {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
+ {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
+ {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
+ {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
+ {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
+ {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
+ {SYS_BOOT1, (M3)}, /* gpio_185 */
+ {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
+ {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT4, (M3)}, /* gpio_188 */
+ {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
+ {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
+ {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
+ {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */
+ {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */
+ {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */
+ {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */
+ {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */
+ {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */
+ {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */
+ {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */
+ {DPM_EMU10, (IEN | M5)}, /* dispc2_de */
+ {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */
+ {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */
+ {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
+ {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
+ {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
+ {DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */
+ {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
+ {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
+ {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
+};
+
+const struct pad_conf_entry wkup_padconf_array[] = {
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
+ {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+};
+
+#endif
+
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 8ed7873fde2..7039bd559b3 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -25,6 +25,8 @@
#include <common.h>
#include <asm/arch/sys_proto.h>
+#include "sdp.h"
+
DECLARE_GLOBAL_DATA_PTR;
const struct omap_sysinfo sysinfo = {
@@ -62,3 +64,27 @@ int misc_init_r(void)
{
return 0;
}
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+ for (i = 0; i < size; i++, pad++)
+ writew(pad->val, base + pad->offset);
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the board.
+ */
+void set_muxconf_regs(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
+ sizeof(core_padconf_array) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
+ sizeof(wkup_padconf_array) /
+ sizeof(struct pad_conf_entry));
+}
diff --git a/board/ti/sdp4430/sdp.h b/board/ti/sdp4430/sdp.h
new file mode 100644
index 00000000000..803e3d307bf
--- /dev/null
+++ b/board/ti/sdp4430/sdp.h
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDP_H_
+#define _SDP_H_
+
+#include <asm/io.h>
+#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array[] = {
+ {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+ {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+ {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+ {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+ {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+ {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+ {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+ {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+ {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
+ {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
+ {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
+ {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */
+ {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */
+ {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */
+ {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */
+ {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */
+ {GPMC_A16, (M3)}, /* gpio_40 */
+ {GPMC_A17, (PTD | M3)}, /* gpio_41 */
+ {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */
+ {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
+ {GPMC_A20, (IEN | M3)}, /* gpio_44 */
+ {GPMC_A21, (M3)}, /* gpio_45 */
+ {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
+ {GPMC_A24, (PTD | M3)}, /* gpio_48 */
+ {GPMC_A25, (PTD | M3)}, /* gpio_49 */
+ {GPMC_NCS0, (M3)}, /* gpio_50 */
+ {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */
+ {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */
+ {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */
+ {GPMC_NWP, (M3)}, /* gpio_54 */
+ {GPMC_CLK, (PTD | M3)}, /* gpio_55 */
+ {GPMC_NADV_ALE, (M3)}, /* gpio_56 */
+ {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+ {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+ {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
+ {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
+ {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
+ {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {C2C_DATA11, (PTD | M3)}, /* gpio_100 */
+ {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
+ {C2C_DATA14, (M1)}, /* dsi2_te0 */
+ {C2C_DATA15, (PTD | M3)}, /* gpio_104 */
+ {HDMI_HPD, (M0)}, /* hdmi_hpd */
+ {HDMI_CEC, (M0)}, /* hdmi_cec */
+ {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */
+ {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */
+ {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
+ {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
+ {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
+ {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
+ {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
+ {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
+ {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */
+ {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */
+ {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */
+ {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */
+ {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
+ {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
+ {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
+ {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
+ {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
+ {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
+ {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
+ {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
+ {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
+ {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
+ {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
+ {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
+ {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
+ {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
+ {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
+ {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
+ {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
+ {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
+ {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
+ {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
+ {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+ {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+ {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+ {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+ {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+ {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+ {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+ {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+ {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+ {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+ {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
+ {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
+ {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
+ {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
+ {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
+ {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
+ {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
+ {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
+ {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
+ {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
+ {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
+ {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
+ {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
+ {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
+ {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
+ {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
+ {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
+ {UART2_RTS, (M0)}, /* uart2_rts */
+ {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
+ {UART2_TX, (M0)}, /* uart2_tx */
+ {HDQ_SIO, (M3)}, /* gpio_127 */
+ {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+ {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+ {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+ {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+ {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+ {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+ {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+ {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
+ {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
+ {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
+ {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
+ {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
+ {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
+ {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
+ {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
+ {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+ {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+ {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+ {UART3_TX_IRTX, (M0)}, /* uart3_tx */
+ {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
+ {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
+ {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
+ {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
+ {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
+ {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
+ {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
+ {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
+ {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
+ {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
+ {UART4_RX, (IEN | M0)}, /* uart4_rx */
+ {UART4_TX, (M0)}, /* uart4_tx */
+ {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
+ {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
+ {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
+ {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */
+ {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */
+ {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */
+ {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */
+ {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */
+ {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */
+ {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */
+ {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
+ {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
+ {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
+ {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
+ {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
+ {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
+ {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */
+ {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */
+ {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
+ {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
+ {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
+ {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */
+ {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */
+ {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */
+ {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
+ {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
+ {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
+ {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
+ {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
+ {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
+ {SYS_BOOT1, (M3)}, /* gpio_185 */
+ {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
+ {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT4, (M3)}, /* gpio_188 */
+ {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
+ {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
+ {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
+ {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */
+ {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */
+ {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */
+ {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */
+ {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */
+ {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */
+ {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */
+ {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */
+ {DPM_EMU10, (IEN | M5)}, /* dispc2_de */
+ {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */
+ {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */
+ {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
+ {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
+ {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
+ {DPM_EMU16, (M3)}, /* gpio_27 */
+ {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
+ {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
+ {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
+};
+
+const struct pad_conf_entry wkup_padconf_array[] = {
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+ {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
+ {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+};
+
+#endif
+
diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 3256133dc2e..7c98f150d74 100644
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -27,6 +27,8 @@
#include "omap24xx_i2c.h"
+#define I2C_TIMEOUT 10
+
static void wait_for_bb (void);
static u16 wait_for_pin (void);
static void flush_fifo(void);
@@ -41,6 +43,7 @@ void i2c_init (int speed, int slaveadd)
int psc, fsscll, fssclh;
int hsscll = 0, hssclh = 0;
u32 scll, sclh;
+ int timeout = I2C_TIMEOUT;
/* Only handle standard, fast and high speeds */
if ((speed != OMAP_I2C_STANDARD) &&
@@ -102,15 +105,24 @@ void i2c_init (int speed, int slaveadd)
sclh = (unsigned int)fssclh;
}
- writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
- udelay(1000);
- writew(0x0, &i2c_base->sysc); /* will probably self clear but */
-
if (readw (&i2c_base->con) & I2C_CON_EN) {
writew (0, &i2c_base->con);
udelay (50000);
}
+ writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */
+ udelay(1000);
+
+ writew(I2C_CON_EN, &i2c_base->con);
+ while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) {
+ if (timeout <= 0) {
+ printf("ERROR: Timeout in soft-reset\n");
+ return;
+ }
+ udelay(1000);
+ }
+
+ writew(0, &i2c_base->con);
writew(psc, &i2c_base->psc);
writew(scll, &i2c_base->scll);
writew(sclh, &i2c_base->sclh);
@@ -159,15 +171,14 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
}
if (!i2c_error) {
- /* free bus, otherwise we can't use a combined transction */
- writew (0, &i2c_base->con);
- while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) {
+ writew (I2C_CON_EN, &i2c_base->con);
+ while (readw(&i2c_base->stat) &
+ (I2C_STAT_XRDY | I2C_STAT_ARDY)) {
udelay (10000);
/* Have to clear pending interrupt to clear I2C_STAT */
writew (0xFFFF, &i2c_base->stat);
}
- wait_for_bb ();
/* set slave address */
writew (devaddr, &i2c_base->sa);
/* read one byte from slave */
@@ -191,8 +202,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
if (!i2c_error) {
writew (I2C_CON_EN, &i2c_base->con);
- while (readw (&i2c_base->stat)
- || (readw (&i2c_base->con) & I2C_CON_MST)) {
+ while (readw (&i2c_base->stat) &
+ (I2C_STAT_RRDY | I2C_STAT_ARDY)) {
udelay (10000);
writew (0xFFFF, &i2c_base->stat);
}
diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h
index 92a3416e0e3..650e33a8887 100644
--- a/drivers/i2c/omap24xx_i2c.h
+++ b/drivers/i2c/omap24xx_i2c.h
@@ -85,6 +85,10 @@
#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
+/* I2C System Status Register (I2C_SYSS): */
+
+#define I2C_SYSS_RDONE (1 << 0) /* Internel reset monitoring */
+
#define I2C_SCLL_SCLL 0
#define I2C_SCLL_SCLL_M 0xFF
#define I2C_SCLL_HSSCLL 8
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index dd0651466fd..db531738379 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libpower.a
COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o
+COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
new file mode 100644
index 00000000000..cf1da6b6a23
--- /dev/null
+++ b/drivers/power/twl6030.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <config.h>
+#ifdef CONFIG_TWL6030_POWER
+
+#include <twl6030.h>
+
+/* Functions to read and write from TWL6030 */
+static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg)
+{
+ return i2c_write(chip_no, reg, 1, &val, 1);
+}
+
+static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+{
+ return i2c_read(chip_no, reg, 1, val, 1);
+}
+
+void twl6030_start_usb_charging(void)
+{
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500,
+ CHARGERUSB_VICHRG);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE,
+ CHARGERUSB_CINLIMIT);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP,
+ CONTROLLER_INT_MASK);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG,
+ CHARGERUSB_INT_MASK);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0,
+ CHARGERUSB_VOREG);
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100,
+ CHARGERUSB_CTRL2);
+ /* Enable USB charging */
+ twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER,
+ CONTROLLER_CTRL1);
+ return;
+}
+
+void twl6030_init_battery_charging(void)
+{
+ twl6030_start_usb_charging();
+ return;
+}
+
+void twl6030_usb_device_settings()
+{
+ u8 data = 0;
+
+ /* Select APP Group and set state to ON */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE);
+
+ twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2);
+ data |= 0x10;
+
+ /* Select the input supply for VBUS regulator */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2);
+}
+#endif
diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c
index a983552357c..c7876ed094b 100644
--- a/drivers/usb/musb/omap3.c
+++ b/drivers/usb/musb/omap3.c
@@ -31,6 +31,7 @@
*/
#include <twl4030.h>
+#include <twl6030.h>
#include "omap3.h"
static int platform_needs_initialization = 1;
@@ -65,7 +66,12 @@ static struct omap3_otg_regs *otg;
#define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001
+/* OMAP4430 has an internal PHY, use it */
+#ifdef CONFIG_OMAP4430
+#define OMAP3_OTG_INTERFSEL_OMAP 0x0000
+#else
#define OMAP3_OTG_INTERFSEL_OMAP 0x0001
+#endif
#define OMAP3_OTG_FORCESTDBY_STANDBY 0x0001
@@ -105,6 +111,11 @@ int musb_platform_init(void)
goto end;
}
#endif
+
+#ifdef CONFIG_TWL6030_POWER
+ twl6030_usb_device_settings();
+#endif
+
otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE;
/* Set OTG to always be on */
@@ -122,6 +133,11 @@ int musb_platform_init(void)
#ifdef CONFIG_OMAP3_EVM
musb_cfg.extvbus = omap3_evm_need_extvbus();
#endif
+
+#ifdef CONFIG_OMAP4430
+ u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C);
+ *usbotghs_control = 0x15;
+#endif
platform_needs_initialization = 0;
}
diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h
index 2886d7e7048..b2acdf4bc6a 100644
--- a/drivers/usb/musb/omap3.h
+++ b/drivers/usb/musb/omap3.h
@@ -31,10 +31,11 @@
#ifndef _MUSB_OMAP3_H_
#define _MUSB_OMAP3_H_
+#include <asm/arch/cpu.h>
#include "musb_core.h"
/* Base address of MUSB registers */
-#define MENTOR_USB0_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000)
+#define MENTOR_USB0_BASE MUSB_BASE
/* Base address of OTG registers */
#define OMAP3_OTG_BASE (MENTOR_USB0_BASE + 0x400)
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index b1e40a38f61..a0d27a437d5 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -35,6 +35,7 @@
#define CONFIG_OMAP44XX 1 /* which is a 44XX */
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
#define CONFIG_PANDA 1 /* working with Panda */
+#define CONFIG_ARCH_CPU_INIT
/* Get CPU defs */
#include <asm/arch/cpu.h>
@@ -102,12 +103,29 @@
#define CONFIG_DRIVER_OMAP34XX_I2C 1
#define CONFIG_I2C_MULTI_BUS 1
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER 1
+
/* MMC */
#define CONFIG_MMC 1
#define CONFIG_OMAP3_MMC 1
#define CONFIG_SYS_MMC_SET_DEV 1
#define CONFIG_DOS_PARTITION 1
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "OMAP4 Panda"
+
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
@@ -135,16 +153,21 @@
* Environment setup
*/
+#define CONFIG_BOOTDELAY 3
+
/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
"mmcdev=1\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -162,7 +185,6 @@
"else " \
"if run loaduimage; then " \
"run mmcboot; " \
- "else run nandboot; " \
"fi; " \
"fi; " \
"fi"
@@ -195,7 +217,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x80000000
/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT1_BASE
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 81215544480..d5439f988a3 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -36,6 +36,7 @@
#define CONFIG_OMAP44XX 1 /* which is a 44XX */
#define CONFIG_OMAP4430 1 /* which is in a 4430 */
#define CONFIG_4430SDP 1 /* working with SDP */
+#define CONFIG_ARCH_CPU_INIT
/* Get CPU defs */
#include <asm/arch/cpu.h>
@@ -103,12 +104,29 @@
#define CONFIG_DRIVER_OMAP34XX_I2C 1
#define CONFIG_I2C_MULTI_BUS 1
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER 1
+
/* MMC */
#define CONFIG_MMC 1
#define CONFIG_OMAP3_MMC 1
#define CONFIG_SYS_MMC_SET_DEV 1
#define CONFIG_DOS_PARTITION 1
+/* USB */
+#define CONFIG_MUSB_UDC 1
+#define CONFIG_USB_OMAP3 1
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE 1
+#define CONFIG_USB_TTY 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+/* Change these to suit your needs */
+#define CONFIG_USBD_VENDORID 0x0451
+#define CONFIG_USBD_PRODUCTID 0x5678
+#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
+#define CONFIG_USBD_PRODUCT_NAME "SDP4430"
+
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
@@ -136,16 +154,21 @@
* Environment setup
*/
+#define CONFIG_BOOTDELAY 3
+
/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
"mmcdev=1\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
@@ -163,7 +186,6 @@
"else " \
"if run loaduimage; then " \
"run mmcboot; " \
- "else run nandboot; " \
"fi; " \
"fi; " \
"fi"
@@ -196,7 +218,7 @@
#define CONFIG_SYS_LOAD_ADDR 0x80000000
/* Use General purpose timer 1 */
-#define CONFIG_SYS_TIMERBASE GPT1_BASE
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ 1000
diff --git a/include/twl6030.h b/include/twl6030.h
new file mode 100644
index 00000000000..54923ab2e4b
--- /dev/null
+++ b/include/twl6030.h
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+/* I2C chip addresses */
+#define TWL6030_CHIP_PM 0x48
+
+#define TWL6030_CHIP_USB 0x49
+#define TWL6030_CHIP_ADC 0x49
+#define TWL6030_CHIP_CHARGER 0x49
+#define TWL6030_CHIP_PWM 0x49
+
+/* Battery CHARGER REGISTERS */
+#define CONTROLLER_INT_MASK 0xE0
+#define CONTROLLER_CTRL1 0xE1
+#define CONTROLLER_WDG 0xE2
+#define CONTROLLER_STAT1 0xE3
+#define CHARGERUSB_INT_STATUS 0xE4
+#define CHARGERUSB_INT_MASK 0xE5
+#define CHARGERUSB_STATUS_INT1 0xE6
+#define CHARGERUSB_STATUS_INT2 0xE7
+#define CHARGERUSB_CTRL1 0xE8
+#define CHARGERUSB_CTRL2 0xE9
+#define CHARGERUSB_CTRL3 0xEA
+#define CHARGERUSB_STAT1 0xEB
+#define CHARGERUSB_VOREG 0xEC
+#define CHARGERUSB_VICHRG 0xED
+#define CHARGERUSB_CINLIMIT 0xEE
+#define CHARGERUSB_CTRLLIMIT1 0xEF
+
+/* CHARGERUSB_VICHRG */
+#define CHARGERUSB_VICHRG_500 0x4
+#define CHARGERUSB_VICHRG_1500 0xE
+/* CHARGERUSB_CINLIMIT */
+#define CHARGERUSB_CIN_LIMIT_100 0x1
+#define CHARGERUSB_CIN_LIMIT_300 0x5
+#define CHARGERUSB_CIN_LIMIT_500 0x9
+#define CHARGERUSB_CIN_LIMIT_NONE 0xF
+/* CONTROLLER_INT_MASK */
+#define MVAC_FAULT (1 << 6)
+#define MAC_EOC (1 << 5)
+#define MBAT_REMOVED (1 << 4)
+#define MFAULT_WDG (1 << 3)
+#define MBAT_TEMP (1 << 2)
+#define MVBUS_DET (1 << 1)
+#define MVAC_DET (1 << 0)
+/* CHARGERUSB_INT_MASK */
+#define MASK_MCURRENT_TERM (1 << 3)
+#define MASK_MCHARGERUSB_STAT (1 << 2)
+#define MASK_MCHARGERUSB_THMREG (1 << 1)
+#define MASK_MCHARGERUSB_FAULT (1 << 0)
+/* CHARGERUSB_VOREG */
+#define CHARGERUSB_VOREG_3P52 0x01
+#define CHARGERUSB_VOREG_4P0 0x19
+#define CHARGERUSB_VOREG_4P2 0x23
+#define CHARGERUSB_VOREG_4P76 0x3F
+/* CHARGERUSB_CTRL2 */
+#define CHARGERUSB_CTRL2_VITERM_50 (0 << 5)
+#define CHARGERUSB_CTRL2_VITERM_100 (1 << 5)
+#define CHARGERUSB_CTRL2_VITERM_150 (2 << 5)
+/* CONTROLLER_CTRL1 */
+#define CONTROLLER_CTRL1_EN_CHARGER (1 << 4)
+#define CONTROLLER_CTRL1_SEL_CHARGER (1 << 3)
+
+#define VUSB_CFG_STATE 0xA2
+#define MISC2 0xE5
+
+void twl6030_init_battery_charging(void);
+void twl6030_usb_device_settings(void);