diff options
149 files changed, 2041 insertions, 7586 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index d7cd09c138e..a79903747ac 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -198,6 +198,14 @@ Siddarth Gore <gores@marvell.com> guruplug ARM926EJS (Kirkwood SoC) +Paul Gortmaker <paul.gortmaker@windriver.com> + + sbc8349 MPC8349 + sbc8540 MPC8540 + sbc8548 MPC8548 + sbc8560 MPC8560 + sbc8641d MPC8641D + Frank Gottschling <fgottschling@eltec.de> MHPC MPC8xx @@ -212,11 +220,6 @@ Wolfgang Grandegger <wg@denx.de> IPHASE4539 MPC8260 SCM MPC8260 -Joe Hamman <joe.hamman@embeddedspecialties.com> - - sbc8548 MPC8548 - sbc8641d MPC8641D - Klaus Heydeck <heydeck@kieback-peter.de> KUP4K MPC855 @@ -256,10 +259,6 @@ Sangmoon Kim <dogoil@etinsys.com> debris MPC8245 KVME080 MPC8245 -Robert Lazarski <robertlazarski@gmail.com> - - ATUM8548 MPC8548 - The LEOX team <team@leox.org> ELPT860 MPC860T @@ -2787,6 +2787,24 @@ Low Level (hardware related) configuration options: Disable PCI-Express on systems where it is supported but not required. +- CONFIG_SYS_SRIO: + Chip has SRIO or not + +- CONFIG_SRIO1: + Board has SRIO 1 port available + +- CONFIG_SRIO2: + Board has SRIO 2 port available + +- CONFIG_SYS_SRIOn_MEM_VIRT: + Virtual Address of SRIO port 'n' memory region + +- CONFIG_SYS_SRIOn_MEM_PHYS: + Physical Address of SRIO port 'n' memory region + +- CONFIG_SYS_SRIOn_MEM_SIZE: + Size of SRIO port 'n' memory region + - CONFIG_SPD_EEPROM Get DDR timing information from an I2C EEPROM. Common with pluggable memory modules such as SODIMMs diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 63d79233d5a..af7bc09b919 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -66,8 +66,6 @@ COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_FSL_CORENET) += liodn.o COBJS-$(CONFIG_MP) += mp.o -COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o -COBJS-$(CONFIG_P1022) += p1022_serdes.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_FSL_CORENET) += portals.o @@ -77,6 +75,22 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o + +# SoC specific SERDES support +COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o +COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o +COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o +COBJS-$(CONFIG_MPC8568) += mpc8568_serdes.o +COBJS-$(CONFIG_MPC8569) += mpc8569_serdes.o +COBJS-$(CONFIG_MPC8572) += mpc8572_serdes.o +COBJS-$(CONFIG_P1011) += p1021_serdes.o +COBJS-$(CONFIG_P1012) += p1021_serdes.o +COBJS-$(CONFIG_P1013) += p1013_serdes.o +COBJS-$(CONFIG_P1020) += p1021_serdes.o +COBJS-$(CONFIG_P1021) += p1021_serdes.o +COBJS-$(CONFIG_P1022) += p1022_serdes.o +COBJS-$(CONFIG_P2010) += p2020_serdes.o +COBJS-$(CONFIG_P2020) += p2020_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS = $(COBJS-y) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index d73f3d7f148..7dfa596f03d 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -47,6 +47,28 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) puts("Work-around for Erratum CPU22 enabled\n"); #endif +#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN) + puts("Work-around for DDR MSYNC_IN Erratum enabled\n"); +#endif +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111) + puts("Work-around for Erratum ESDHC111 enabled\n"); +#endif +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) + puts("Work-around for Erratum ESDHC135 enabled\n"); +#endif +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) + puts("Work-around for Erratum ESDHC136 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002 + puts("Work-around for Erratum CPC-A002 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003 + puts("Work-around for Erratum CPC-A003 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001 + puts("Work-around for Erratum ELBC-A001 enabled\n"); +#endif + return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 55ee36d0bc7..4ef9be1b228 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -34,6 +34,7 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/fsl_lbc.h> #include <post.h> #include <asm/processor.h> #include <asm/fsl_ddr_sdram.h> @@ -286,6 +287,57 @@ void mpc85xx_reginfo(void) print_lbc_regs(); } +/* Common ddr init for non-corenet fsl 85xx platforms */ +#ifndef CONFIG_FSL_CORENET +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = 0; + +#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN) + { + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned int x = 10; + unsigned int i; + + /* + * Work around to stabilize DDR DLL + */ + out_be32(&gur->ddrdllcr, 0x81000000); + asm("sync;isync;msync"); + udelay(200); + while (in_be32(&gur->ddrdllcr) != 0x81000100) { + setbits_be32(&gur->devdisr, 0x00010000); + for (i = 0; i < x; i++) + ; + clrbits_be32(&gur->devdisr, 0x00010000); + x++; + } + } +#endif + +#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) + dram_size = fsl_ddr_sdram(); +#else + dram_size = fixed_sdram(); +#endif + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(dram_size); +#endif + + /* Some boards also have sdram on the lbc */ + lbc_sdram_init(); + + puts("DDR: "); + return dram_size; +} +#endif + #if CONFIG_POST & CONFIG_SYS_POST_MEMORY /* Board-specific functions defined in each board's ddr.c */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 4b8faa5daf3..8ece9700972 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2003 Motorola Inc. * Modified by Xianghua Xiao, X.Xiao@motorola.com @@ -40,6 +40,8 @@ DECLARE_GLOBAL_DATA_PTR; +extern void srio_init(void); + #ifdef CONFIG_QE extern qe_iop_conf_t qe_iop_conf_tab[]; extern void qe_config_iopin(u8 port, u8 pin, int dir, @@ -140,6 +142,13 @@ static void enable_cpc(void) u32 cpccfg0 = in_be32(&cpc->cpccfg0); size += CPC_CFG0_SZ_K(cpccfg0); +#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A002 + setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_TAG_ECC_SCRUB_DIS); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003 + setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS); +#endif + out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE); /* Read back to sync write */ in_be32(&cpc->cpccsr0); @@ -232,6 +241,12 @@ void cpu_init_f (void) invalidate_cpc(); } +/* Implement a dummy function for those platforms w/o SERDES */ +static void __fsl_serdes__init(void) +{ + return ; +} +__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); /* * Initialize L2 as cache. @@ -375,15 +390,25 @@ int cpu_init_r(void) qe_reset(); #endif -#if defined(CONFIG_SYS_HAS_SERDES) /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); + +#ifdef CONFIG_SYS_SRIO + srio_init(); #endif #if defined(CONFIG_MP) setup_mp(); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 + { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } +#endif + #ifdef CONFIG_SYS_LBC_LCRR /* * Modify the CLKDIV field of LCRR register to improve the writing diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 53e05965548..00fa7529965 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -38,6 +38,7 @@ DECLARE_GLOBAL_DATA_PTR; extern void ft_qe_setup(void *blob); extern void ft_fixup_num_cores(void *blob); +extern void ft_srio_setup(void *blob); #ifdef CONFIG_MP #include "mp.h" @@ -478,4 +479,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_fixup_qportals(blob); #endif + +#ifdef CONFIG_SYS_SRIO + ft_srio_setup(blob); +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c new file mode 100644 index 00000000000..7c490972a55 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/mpc8544_serdes.c @@ -0,0 +1,95 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 8 +#define SRDS2_MAX_LANES 4 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, + [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, + [0x4] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, + [0x5] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, + [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, + [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, +}; + +static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x1] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3}, + [0x3] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3}, + [0x5] = {NONE, NONE, SGMII_TSEC1, SGMII_TSEC3}, + [0x6] = {PCIE3, NONE, NONE, NONE}, + [0x7] = {PCIE3, NONE, SGMII_TSEC1, SGMII_TSEC3}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } + + if (pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS) + serdes2_prtcl_map &= ~(1 << SGMII_TSEC1); + + if (pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS) + serdes2_prtcl_map &= ~(1 << SGMII_TSEC3); +} diff --git a/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c new file mode 100644 index 00000000000..76288cd568e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/mpc8548_serdes.c @@ -0,0 +1,65 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 8 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x4] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x5] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x6] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds1_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL] = %x\n", srds1_cfg); + + if (srds1_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL] = %d\n", srds1_cfg); + return ; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds1_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c new file mode 100644 index 00000000000..258263739f2 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/mpc8568_serdes.c @@ -0,0 +1,65 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 8 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x4] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x5] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x6] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c new file mode 100644 index 00000000000..f480c2609d6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/mpc8569_serdes.c @@ -0,0 +1,74 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x0] = {PCIE1, NONE, NONE, NONE}, + [0x1] = {SRIO1, SRIO2, SGMII_TSEC1, SGMII_TSEC2}, + [0x2] = {SRIO1, SRIO2, SGMII_TSEC1, SGMII_TSEC2}, + [0x3] = {SRIO1, SRIO2, NONE, NONE}, + [0x4] = {PCIE1, NONE, SGMII_TSEC1, SGMII_TSEC2}, + [0x5] = {PCIE1, PCIE1, SGMII_TSEC1, SGMII_TSEC2}, + [0x6] = {PCIE1, NONE, SRIO1, SRIO2}, + [0x7] = {PCIE1, PCIE1, SRIO1, SRIO2}, + [0x8] = {PCIE1, PCIE1, SRIO1, SRIO2}, + [0x9] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xa] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xb] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xc] = {PCIE1, SRIO1, SGMII_TSEC1, SGMII_TSEC2}, + [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c b/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c new file mode 100644 index 00000000000..2ff5d9a060a --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/mpc8572_serdes.c @@ -0,0 +1,81 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 8 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, NONE, NONE}, + [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}, + [0x6] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE3, PCIE3}, + [0xb] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0xc] = {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}, + [0xd] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0xe] = {NONE, NONE, NONE, NONE, SRIO1, SRIO1, SRIO1, SRIO1}, + [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + serdes1_prtcl_map |= (1 << SGMII_TSEC1); + + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + serdes1_prtcl_map |= (1 << SGMII_TSEC2); + + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + serdes1_prtcl_map |= (1 << SGMII_TSEC3); + + if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + serdes1_prtcl_map |= (1 << SGMII_TSEC4); +} diff --git a/arch/powerpc/cpu/mpc85xx/p1021_serdes.c b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c new file mode 100644 index 00000000000..457ab5dca87 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p1021_serdes.c @@ -0,0 +1,64 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x0] = {PCIE1, NONE, NONE, NONE}, + [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0xe] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3}, + [0xf] = {PCIE1, PCIE1, SGMII_TSEC2, SGMII_TSEC3}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/p2020_serdes.c b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c new file mode 100644 index 00000000000..389ff6bd280 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p2020_serdes.c @@ -0,0 +1,73 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x0] = {PCIE1, NONE, NONE, NONE}, + [0x2] = {PCIE1, PCIE2, PCIE3, PCIE3}, + [0x4] = {PCIE1, PCIE1, PCIE3, PCIE3}, + [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x7] = {SRIO2, SRIO1, NONE, NONE}, + [0x8] = {SRIO2, SRIO2, SRIO2, SRIO2}, + [0x9] = {SRIO2, SRIO2, SRIO2, SRIO2}, + [0xa] = {SRIO2, SRIO2, SRIO2, SRIO2}, + [0xb] = {SRIO2, SRIO1, SGMII_TSEC2, SGMII_TSEC3}, + [0xc] = {SRIO2, SRIO1, SGMII_TSEC2, SGMII_TSEC3}, + [0xd] = {PCIE1, SRIO1, SGMII_TSEC2, SGMII_TSEC3}, + [0xe] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3}, + [0xf] = {PCIE1, PCIE1, SGMII_TSEC2, SGMII_TSEC3}, +}; + +int is_serdes_configured(enum srds_prtcl prtcl) +{ + return (1 << prtcl) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 945c1b84779..fa98af64b54 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc. * Copyright (C) 2003 Motorola,Inc. * * See file CREDITS for list of people who contributed to this @@ -753,7 +753,7 @@ dcache_disable: lis r4,0 ori r4,r4,L1CSR0_DCE andc r3,r3,r4 - mtspr L1CSR0,r0 + mtspr L1CSR0,r3 isync blr diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index e3a71aec5c4..31143ba5300 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -250,10 +250,14 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; + unsigned int wimge = 0; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; u64 size, memsize = (u64)memsize_in_meg << 20; +#ifdef CONFIG_SYS_PPC_DDR_WIMGE + wimge = CONFIG_SYS_PPC_DDR_WIMGE; +#endif size = min(memsize, CONFIG_MAX_MEM_MAPPED); /* Convert (4^max) kB to (2^max) bytes */ @@ -277,7 +281,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) tlb_size = (camsize - 10) / 2; set_tlb(1, ram_tlb_address, p_addr, - MAS3_SX|MAS3_SW|MAS3_SR, 0, + MAS3_SX|MAS3_SW|MAS3_SR, wimge, 0, ram_tlb_index, tlb_size, 1); size -= 1ULL << camsize; diff --git a/arch/powerpc/cpu/mpc86xx/Makefile b/arch/powerpc/cpu/mpc86xx/Makefile index 5b7d80a5bd6..b4ef286afe3 100644 --- a/arch/powerpc/cpu/mpc86xx/Makefile +++ b/arch/powerpc/cpu/mpc86xx/Makefile @@ -42,6 +42,8 @@ COBJS-$(CONFIG_MPC8641) += ddr-8641.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-y += interrupts.o COBJS-$(CONFIG_MP) += mp.o +COBJS-$(CONFIG_MPC8610) += mpc8610_serdes.o +COBJS-$(CONFIG_MPC8641) += mpc8641_serdes.o COBJS-y += speed.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) diff --git a/arch/powerpc/cpu/mpc86xx/cpu_init.c b/arch/powerpc/cpu/mpc86xx/cpu_init.c index 82c216ba5d1..802202478aa 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc86xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2004,2009 Freescale Semiconductor, Inc. + * Copyright 2004,2009-2011 Freescale Semiconductor, Inc. * Jeff Brown * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -31,8 +31,10 @@ #include <mpc86xx.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> #include <asm/mp.h> +extern void srio_init(void); void setup_bats(void); DECLARE_GLOBAL_DATA_PTR; @@ -76,6 +78,13 @@ void cpu_init_f(void) */ int cpu_init_r(void) { + /* needs to be in ram since code uses global static vars */ + fsl_serdes_init(); + +#ifdef CONFIG_SYS_SRIO + srio_init(); +#endif + #if defined(CONFIG_MP) setup_mp(); #endif diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index ff89ee554c4..61f5110b7d2 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2008,2010 Freescale Semiconductor, Inc. + * Copyright 2008, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,6 +14,7 @@ DECLARE_GLOBAL_DATA_PTR; extern void ft_fixup_num_cores(void *blob); +extern void ft_srio_setup(void *blob); void ft_cpu_setup(void *blob, bd_t *bd) { @@ -58,4 +59,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) ft_fixup_num_cores(blob); #endif + +#ifdef CONFIG_SYS_SRIO + ft_srio_setup(blob); +#endif } diff --git a/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c b/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c new file mode 100644 index 00000000000..0dc1975bf9b --- /dev/null +++ b/arch/powerpc/cpu/mpc86xx/mpc8610_serdes.c @@ -0,0 +1,85 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_86xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 4 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x1] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x4] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x7] = {NONE, NONE, NONE, NONE}, +}; + +static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x0] = {PCIE2, PCIE2, PCIE2, PCIE2}, + [0x4] = {PCIE2, PCIE2, PCIE2, PCIE2}, + [0x7] = {NONE, NONE, NONE, NONE}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; + ccsr_gur_t *gur = &immap->im_gur; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC8610_PORDEVSR_IO_SEL) >> + MPC8610_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c b/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c new file mode 100644 index 00000000000..3ae9069f1b8 --- /dev/null +++ b/arch/powerpc/cpu/mpc86xx/mpc8641_serdes.c @@ -0,0 +1,94 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_86xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 +#define SRDS2_MAX_LANES 4 + +static u32 serdes1_prtcl_map, serdes2_prtcl_map; + +static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = { + [0x2] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x3] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x5] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x6] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0x7] = {PCIE1, PCIE1, PCIE1, PCIE1}, + [0xf] = {PCIE1, PCIE1, PCIE1, PCIE1}, +}; + +static u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = { + [0x3] = {PCIE2, PCIE2, PCIE2, PCIE2}, + [0x5] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0x6] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0x7] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0x9] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xa] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xb] = {SRIO1, SRIO1, SRIO1, SRIO1}, + [0xe] = {PCIE2, PCIE2, PCIE2, PCIE2}, + [0xf] = {PCIE2, PCIE2, PCIE2, PCIE2}, +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + int ret = (1 << device) & serdes1_prtcl_map; + + if (ret) + return ret; + + return (1 << device) & serdes2_prtcl_map; +} + +void fsl_serdes_init(void) +{ + immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; + ccsr_gur_t *gur = &immap->im_gur; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC8641_PORDEVSR_IO_SEL) >> + MPC8641_PORDEVSR_IO_SEL_SHIFT; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } + + if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + for (lane = 0; lane < SRDS2_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane]; + serdes2_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index ab80dd77230..5dfd65b8824 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -12,11 +12,11 @@ LIB = $(obj)lib8xxx.o ifneq ($(CPU),mpc83xx) COBJS-y += cpu.o -COBJS-$(CONFIG_PCI) += pci_cfg.o endif COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o +COBJS-$(CONFIG_SYS_SRIO) += srio.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 6d582e97d47..e3888ff6eff 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -469,8 +469,9 @@ phys_size_t fsl_ddr_sdram(void) /* Check for 4G or more. Bad. */ if (total_memory >= (1ull << 32)) { printf("Detected %lld MB of memory\n", total_memory >> 20); - printf("This U-Boot only supports < 4G of DDR\n"); - printf("You could rebuild it with CONFIG_PHYS_64BIT\n"); + printf(" This U-Boot only supports < 4G of DDR\n"); + printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); + printf(" "); /* re-align to match init_func_ram print */ total_memory = CONFIG_MAX_MEM_MAPPED; } #endif diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 774c0e4b42f..c641e850684 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -1,5 +1,5 @@ /* - * Copyright 2008, 2010 Freescale Semiconductor, Inc. + * Copyright 2008, 2010-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -387,3 +387,23 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) "Memory controller interleaving disabled.\n"); } } + +int fsl_use_spd(void) +{ + int use_spd = 0; + +#ifdef CONFIG_DDR_SPD + /* if hwconfig is not enabled, or "sdram" is not defined, use spd */ + if (hwconfig_sub("fsl_ddr", "sdram")) { + if (hwconfig_subarg_cmp("fsl_ddr", "sdram", "spd")) + use_spd = 1; + else if (hwconfig_subarg_cmp("fsl_ddr", "sdram", "fixed")) + use_spd = 0; + else + use_spd = 1; + } else + use_spd = 1; +#endif + + return use_spd; +} diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 54e60bb1aef..0c166fd6c9c 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -28,6 +28,7 @@ #include <fdt_support.h> #include <asm/mp.h> #include <asm/fsl_enet.h> +#include <asm/fsl_serdes.h> #if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) static int ft_del_cpuhandle(void *blob, int cpuhandle) @@ -239,3 +240,23 @@ int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc) return fdt_setprop_string(blob, offset, "phy-connection-type", fsl_phy_enet_if_str[phyc]); } + +#ifdef CONFIG_SYS_SRIO +void ft_srio_setup(void *blob) +{ +#ifdef CONFIG_SRIO1 + if (!is_serdes_configured(SRIO1)) { + fdt_del_node_and_alias(blob, "rio0"); + } +#else + fdt_del_node_and_alias(blob, "rio0"); +#endif +#ifdef CONFIG_SRIO2 + if (!is_serdes_configured(SRIO2)) { + fdt_del_node_and_alias(blob, "rio1"); + } +#else + fdt_del_node_and_alias(blob, "rio1"); +#endif +} +#endif diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index fcef40c5b8b..7598ebf4574 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -9,6 +9,16 @@ #include <common.h> #include <asm/fsl_lbc.h> +#ifdef CONFIG_MPC85xx +/* Boards should provide their own version of this if they use lbc sdram */ +void __lbc_sdram_init(void) +{ + /* Do nothing */ +} +void lbc_sdram_init(void) __attribute__((weak, alias("__lbc_sdram_init"))); +#endif + + void print_lbc_regs(void) { int i; @@ -24,6 +34,11 @@ void init_early_memctl_regs(void) { uint init_br1 = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_ELBC_A001 + /* Set the local bus monitor timeout value to the maximum */ + clrsetbits_be32(&(LBC_BASE_ADDR)->lbcr, LBCR_BMT|LBCR_BMTPS, 0xf); +#endif + #ifdef CONFIG_MPC85xx /* if cs1 is already set via debugger, leave cs0/cs1 alone */ if (get_lbc_br(1) & BR_V) diff --git a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c b/arch/powerpc/cpu/mpc8xxx/pci_cfg.c deleted file mode 100644 index 53236a36f81..00000000000 --- a/arch/powerpc/cpu/mpc8xxx/pci_cfg.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <pci.h> - -struct pci_info { - u32 cfg; -}; - -/* The cfg field is a bit mask in which each bit represents the value of - * cfg_IO_ports[] signal and the bit is set if the interface would be - * enabled based on the value of cfg_IO_ports[] signal - * - * On MPC86xx/PQ3 based systems: - * we extract cfg_IO_ports from GUTS register PORDEVSR - * - * cfg_IO_ports only exist on systems w/PCIe (we set cfg 0 for systems - * without PCIe) - */ - -#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8560) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI] = { - .cfg = 0, - }, -}; -#elif defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI] = { - .cfg = 0, - }, -}; -#elif defined(CONFIG_MPC8536) -static struct pci_info pci_config_info[] = -{ -}; -#elif defined(CONFIG_MPC8544) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI] = { - .cfg = 0, - }, - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) | - (1 << 6) | (1 << 7), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7), - }, - [LAW_TRGT_IF_PCIE_3] = { - .cfg = (1 << 6) | (1 << 7), - }, -}; -#elif defined(CONFIG_MPC8548) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI_1] = { - .cfg = 0, - }, - [LAW_TRGT_IF_PCI_2] = { - .cfg = 0, - }, - /* PCI_2 is always host and we dont use iosel to determine enable/disable */ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 3) | (1 << 4) | (1 << 7), - }, -}; -#elif defined(CONFIG_MPC8568) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI] = { - .cfg = 0, - }, - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 3) | (1 << 4) | (1 << 7), - }, -}; -#elif defined(CONFIG_MPC8569) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) | - (1 << 8) | (1 << 0xc) | (1 << 0xf), - }, -}; -#elif defined(CONFIG_MPC8572) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 2) | (1 << 3) | (1 << 7) | - (1 << 0xb) | (1 << 0xc) | (1 << 0xf), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 3) | (1 << 7), - }, - [LAW_TRGT_IF_PCIE_3] = { - .cfg = (1 << 7), - }, -}; -#elif defined(CONFIG_MPC8610) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCI_1] = { - .cfg = 0, - }, - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 1) | (1 << 4), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 0) | (1 << 4), - }, -}; -#elif defined(CONFIG_MPC8641) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) | - (1 << 7) | (1 << 0xf), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 3) | (1 << 0xe) | (1 << 0xf), - }, -}; -#elif defined(CONFIG_P1011) || defined(CONFIG_P1020) || \ - defined(CONFIG_P1012) || defined(CONFIG_P1021) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 0) | (1 << 6) | (1 << 0xe) | (1 << 0xf), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 0xe), - }, -}; -#elif defined(CONFIG_P1013) || defined(CONFIG_P1022) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xa) | - (1 << 0xb) | (1 << 0xd) | (1 << 0xe) | - (1 << 0xf) | (1 << 0x15) | (1 << 0x16) | - (1 << 0x17) | (1 << 0x18) | (1 << 0x19) | - (1 << 0x1a) | (1 << 0x1b) | (1 << 0x1c) | - (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 1) | (1 << 6) | (1 << 7) | (1 << 9) | - (1 << 0xd) | (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | - (1 << 0x18) | (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b), - }, - [LAW_TRGT_IF_PCIE_3] = { - .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) | (1 << 9) | - (1 << 0xa) | (1 << 0xb) | (1 << 0xd) | (1 << 0x15) | - (1 << 0x16) | (1 << 0x17) | (1 << 0x18) | (1 << 0x1c), - }, -}; -#elif defined(CONFIG_P2010) || defined(CONFIG_P2020) -static struct pci_info pci_config_info[] = -{ - [LAW_TRGT_IF_PCIE_1] = { - .cfg = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6) | - (1 << 0xd) | (1 << 0xe) | (1 << 0xf), - }, - [LAW_TRGT_IF_PCIE_2] = { - .cfg = (1 << 2) | (1 << 0xe), - }, - [LAW_TRGT_IF_PCIE_3] = { - .cfg = (1 << 2) | (1 << 4), - }, -}; -#elif defined(CONFIG_FSL_CORENET) -#else -#error Need to define pci_config_info for processor -#endif - -#ifndef CONFIG_FSL_CORENET -int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel) -{ - return ((1 << io_sel) & pci_config_info[trgt].cfg); -} -#endif diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c new file mode 100644 index 00000000000..e46d328067d --- /dev/null +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -0,0 +1,86 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> + +#if defined(CONFIG_FSL_CORENET) + #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 + #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 + #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR +#elif defined(CONFIG_MPC85xx) + #define _DEVDISR_SRIO1 MPC85xx_DEVDISR_SRIO + #define _DEVDISR_SRIO2 MPC85xx_DEVDISR_SRIO + #define _DEVDISR_RMU MPC85xx_DEVDISR_RMSG + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR +#elif defined(CONFIG_MPC86xx) + #define _DEVDISR_SRIO1 MPC86xx_DEVDISR_SRIO + #define _DEVDISR_SRIO2 MPC86xx_DEVDISR_SRIO + #define _DEVDISR_RMU MPC86xx_DEVDISR_RMSG + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \ + (&((immap_t *)CONFIG_SYS_IMMR)->im_gur) +#else +#error "No defines for DEVDISR_SRIO" +#endif + +void srio_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; + int srio1_used = 0, srio2_used = 0; + + if (is_serdes_configured(SRIO1)) { + set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS, + law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE), + LAW_TRGT_IF_RIO_1); + srio1_used = 1; + printf("SRIO1: enabled\n"); + } else { + printf("SRIO1: disabled\n"); + } + +#ifdef CONFIG_SRIO2 + if (is_serdes_configured(SRIO2)) { + set_next_law(CONFIG_SYS_SRIO2_MEM_PHYS, + law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE), + LAW_TRGT_IF_RIO_2); + srio2_used = 1; + printf("SRIO2: enabled\n"); + } else { + printf("SRIO2: disabled\n"); + } +#endif + +#ifdef CONFIG_FSL_CORENET + /* On FSL_CORENET devices we can disable individual ports */ + if (!srio1_used) + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); + if (!srio2_used) + setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); +#endif + + /* neither port is used - disable everything */ + if (!srio1_used && !srio2_used) { + setbits_be32(&gur->devdisr, _DEVDISR_SRIO1); + setbits_be32(&gur->devdisr, _DEVDISR_SRIO2); + setbits_be32(&gur->devdisr, _DEVDISR_RMU); + } +} diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 17d4b319bcb..3de2113bdad 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -1,5 +1,5 @@ /* - * Copyright 2008-2010 Freescale Semiconductor, Inc. + * Copyright 2008-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -213,6 +213,20 @@ typedef struct memctl_options_s { } memctl_options_t; extern phys_size_t fsl_ddr_sdram(void); +extern int fsl_use_spd(void); + +/* + * The 85xx boards have a common prototype for fixed_sdram so put the + * declaration here. + */ +#ifdef CONFIG_MPC85xx +extern phys_size_t fixed_sdram(void); +#endif + +#if defined(CONFIG_DDR_ECC) +extern void ddr_enable_ecc(unsigned int dram_size); +#endif + typedef struct fixed_ddr_parm{ int min_freq; diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index 0e255ffce80..6a4279ce987 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -90,6 +90,7 @@ enum law_trgt_if { #define LAW_TRGT_IF_PCI_1 LAW_TRGT_IF_PCI #define LAW_TRGT_IF_PCIX LAW_TRGT_IF_PCI #define LAW_TRGT_IF_PCIE_2 LAW_TRGT_IF_PCI_2 +#define LAW_TRGT_IF_RIO_1 LAW_TRGT_IF_RIO #ifdef CONFIG_MPC8641 #define LAW_TRGT_IF_PCIE_1 LAW_TRGT_IF_PCI diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 82d24ab13f8..8695a6269af 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2008,2010 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008,2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -16,6 +16,10 @@ #include <config.h> #include <common.h> +#ifdef CONFIG_MPC85xx +void lbc_sdram_init(void); +#endif + /* BR - Base Registers */ #define BR0 0x5000 /* Register offset to immr */ @@ -291,6 +295,8 @@ #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 +#define LBCR_BMTPS 0x0000000F +#define LBCR_BMTPS_SHIFT 0 /* LCRR - Clock Ratio Register */ diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index dc5c579e1ae..0a98bdee361 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -22,15 +22,13 @@ #define __FSL_PCI_H_ #include <asm/fsl_law.h> - -int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel); +#include <asm/fsl_serdes.h> +#include <pci.h> int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); -void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data); void fsl_pci_config_unlock(struct pci_controller *hose); -void ft_fsl_pci_setup(void *blob, const char *pci_compat, - struct pci_controller *hose, unsigned long ctrl_addr); +void ft_fsl_pci_setup(void *blob, const char *compat, unsigned long ctrl_addr); /* * Common PCI/PCIE Register structure for mpc85xx and mpc86xx @@ -173,8 +171,12 @@ struct fsl_pci_info { int pci_num; }; +void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info); int fsl_pci_init_port(struct fsl_pci_info *pci_info, struct pci_controller *hose, int busno); +int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, + struct fsl_pci_info *pci_info); +int fsl_pcie_init_board(int busno); #define SET_STD_PCI_INFO(x, num) \ { \ @@ -203,54 +205,18 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, } #define __FT_FSL_PCI_SETUP(blob, compat, num) \ - ft_fsl_pci_setup(blob, compat, &pci##num##_hose, \ - CONFIG_SYS_PCI##num##_ADDR) - -#define __FT_FSL_PCI_DEL(blob, compat, num) \ - ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCI##num##_ADDR) + ft_fsl_pci_setup(blob, compat, CONFIG_SYS_PCI##num##_ADDR) #define __FT_FSL_PCIE_SETUP(blob, compat, num) \ - ft_fsl_pci_setup(blob, compat, &pcie##num##_hose, \ - CONFIG_SYS_PCIE##num##_ADDR) - -#define __FT_FSL_PCIE_DEL(blob, compat, num) \ - ft_fsl_pci_setup(blob, compat, NULL, CONFIG_SYS_PCIE##num##_ADDR) + ft_fsl_pci_setup(blob, compat, CONFIG_SYS_PCIE##num##_ADDR) -#ifdef CONFIG_PCI1 #define FT_FSL_PCI1_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 1) -#else -#define FT_FSL_PCI1_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 1) -#endif - -#ifdef CONFIG_PCI2 #define FT_FSL_PCI2_SETUP __FT_FSL_PCI_SETUP(blob, FSL_PCI_COMPAT, 2) -#else -#define FT_FSL_PCI2_SETUP __FT_FSL_PCI_DEL(blob, FSL_PCI_COMPAT, 2) -#endif -#ifdef CONFIG_PCIE1 #define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 1) -#else -#define FT_FSL_PCIE1_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 1) -#endif - -#ifdef CONFIG_PCIE2 #define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 2) -#else -#define FT_FSL_PCIE2_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 2) -#endif - -#ifdef CONFIG_PCIE3 #define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 3) -#else -#define FT_FSL_PCIE3_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 3) -#endif - -#ifdef CONFIG_PCIE4 #define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_SETUP(blob, FSL_PCIE_COMPAT, 4) -#else -#define FT_FSL_PCIE4_SETUP __FT_FSL_PCIE_DEL(blob, FSL_PCIE_COMPAT, 4) -#endif #if defined(CONFIG_FSL_CORENET) #define FSL_PCIE_COMPAT "fsl,p4080-pcie" @@ -259,6 +225,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, FT_FSL_PCIE2_SETUP; \ FT_FSL_PCIE3_SETUP; \ FT_FSL_PCIE4_SETUP; +#define FT_FSL_PCIE_SETUP FT_FSL_PCI_SETUP #elif defined(CONFIG_MPC85xx) #define FSL_PCI_COMPAT "fsl,mpc8540-pci" #define FSL_PCIE_COMPAT "fsl,mpc8548-pcie" @@ -268,6 +235,10 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, FT_FSL_PCIE1_SETUP; \ FT_FSL_PCIE2_SETUP; \ FT_FSL_PCIE3_SETUP; +#define FT_FSL_PCIE_SETUP \ + FT_FSL_PCIE1_SETUP; \ + FT_FSL_PCIE2_SETUP; \ + FT_FSL_PCIE3_SETUP; #elif defined(CONFIG_MPC86xx) #define FSL_PCI_COMPAT "fsl,mpc8610-pci" #define FSL_PCIE_COMPAT "fsl,mpc8641-pcie" diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 30c64ebb17d..b96dec7cef4 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1,7 +1,7 @@ /* * MPC85xx Internal Memory Map * - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * Copyright(c) 2002,2003 Motorola Inc. * Xianghua Xiao (x.xiao@motorola.com) @@ -1619,6 +1619,8 @@ typedef struct cpc_corenet { #define CPC_SRCR0_SRAMEN 0x00000001 #define CPC_ERRDIS_TMHITDIS 0x00000080 /* multi-way hit disable */ #define CPC_HDBCR0_CDQ_SPEC_DIS 0x08000000 +#define CPC_HDBCR0_TAG_ECC_SCRUB_DIS 0x01000000 +#define CPC_HDBCR0_DATA_ECC_SCRUB_DIS 0x00400000 #endif /* CONFIG_SYS_FSL_CPC */ /* Global Utilities Block */ diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h index 4e60cbb7a8c..cc338e4739f 100644 --- a/arch/powerpc/include/asm/immap_86xx.h +++ b/arch/powerpc/include/asm/immap_86xx.h @@ -1,7 +1,7 @@ /* * MPC86xx Internal Memory Map * - * Copyright 2004 Freescale Semiconductor + * Copyright 2004, 2011 Freescale Semiconductor * Jeff Brown (Jeffrey@freescale.com) * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -1205,6 +1205,8 @@ typedef struct ccsr_gur { #define MPC86xx_DEVDISR_PCI1 0x80000000 #define MPC86xx_DEVDISR_PCIE1 0x40000000 #define MPC86xx_DEVDISR_PCIE2 0x20000000 +#define MPC86xx_DEVDISR_SRIO 0x00080000 +#define MPC86xx_DEVDISR_RMSG 0x00040000 #define MPC86xx_DEVDISR_CPU0 0x00008000 #define MPC86xx_DEVDISR_CPU1 0x00004000 #define MPC86xx_RSTCR_HRST_REQ 0x00000002 diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 9cafe85f191..71fafa30da0 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1030,8 +1030,8 @@ #define SVR_8555 0x807100 #define SVR_8555_E 0x807900 #define SVR_8560 0x807000 -#define SVR_8567 0x807600 -#define SVR_8567_E 0x807E00 +#define SVR_8567 0x807501 +#define SVR_8567_E 0x807D01 #define SVR_8568 0x807500 #define SVR_8568_E 0x807D00 #define SVR_8569 0x808000 diff --git a/board/atum8548/Makefile b/board/atum8548/Makefile deleted file mode 100644 index 0bb9ec86ece..00000000000 --- a/board/atum8548/Makefile +++ /dev/null @@ -1,57 +0,0 @@ -# -# Copyright 2004 Freescale Semiconductor. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += law.o -COBJS-y += tlb.o -COBJS-$(CONFIG_FSL_DDR2) += ddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c deleted file mode 100644 index 9403e4b02fd..00000000000 --- a/board/atum8548/atum8548.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Copyright 2007 - * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com - * - * Copyright 2007 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/io.h> -#include <asm/mmu.h> -#include <spd_sdram.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> - -long int fixed_sdram(void); - -int board_early_init_f (void) -{ - return 0; -} - -int checkboard (void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); - - if ((uint)&gur->porpllsr != 0xe00e0000) { - printf("immap size error %lx\n",(ulong)&gur->porpllsr); - } - printf ("Board: ATUM8548\n"); - - lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ - lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ - ecm->eedr = 0xffffffff; /* Clear ecm errors */ - ecm->eeer = 0xffffffff; /* Enable ecm errors */ - - return 0; -} - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -long int fixed_sdram (void) -{ - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - #if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - ddr->err_sbe = 0x00ff0000; - #endif - asm("sync;isync;msync"); - udelay(500); - #if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); - #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - #endif - asm("sync; isync; msync"); - udelay(500); - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_SPD_EEPROM) - puts("fsl_ddr_sdram\n"); - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - puts("fixed_sdram\n"); - dram_size = fixed_sdram (); -#endif - - puts(" DDR: "); - return dram_size; -} - -#if defined(CONFIG_SYS_DRAM_TEST) -int -testdram(void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("Testing DRAM from 0x%08x to 0x%08x\n", - CONFIG_SYS_MEMTEST_START, - CONFIG_SYS_MEMTEST_END); - - printf("DRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) { - printf ("DRAM test attempting to write 0xaaaaaaaa at: %08x\n", (uint) p); - *p = 0xaaaaaaaa; - } - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("DRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("DRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("DRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("DRAM test passed.\n"); - return 0; -} -#endif - -#ifdef CONFIG_PCI1 -static struct pci_controller pci1_hose; -#endif - -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif - -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -void pci_init_board(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[3]; - u32 devdisr, pordevsr, io_sel; - u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - porpllsr = in_be32(&gur->porpllsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - - /* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */ - setbits_be32(&gur->clkocr, MPC85xx_ATUM_CLKOCR); - - if (io_sel & 1) { - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) - printf("eTSEC1 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - printf("eTSEC2 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - printf("eTSEC3 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) - printf("eTSEC4 is in sgmii mode.\n"); - } - -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); -#ifdef CONFIG_SYS_PCIE1_MEM_BUS2 - /* outbound memory */ - pci_set_region(&pcie1_hose.regions[0], - CONFIG_SYS_PCIE1_MEM_BUS2, - CONFIG_SYS_PCIE1_MEM_PHYS2, - CONFIG_SYS_PCIE1_MEM_SIZE2, - PCI_REGION_MEM); - - pcie1_hose.region_count = 1; -#endif - printf ("PCIE1: connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif - -#ifdef CONFIG_PCI1 - pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */ - pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ - pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; - pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; - - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); - printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", - (pci_32) ? 32 : 64, - (pci_speed == 33333000) ? "33" : - (pci_speed == 66666000) ? "66" : "unknown", - pci_clk_sel ? "sync" : "async", - pci_agent ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pci1_hose, first_free_busno); - } else { - printf("PCI1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ -#endif - -#ifdef CONFIG_PCI2 - if (!(devdisr & MPC85xx_DEVDISR_PCI2)) { - SET_STD_PCI_INFO(pci_info[num], 2); - pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs); - - puts("PCI2\n"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pci1_hose, first_free_busno); - } else { - printf("PCI2: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */ -#endif -} - - -int last_stage_init(void) -{ - int ic = icache_status (); - printf ("icache_status: %d\n", ic); - return 0; -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/atum8548/ddr.c b/board/atum8548/ddr.c deleted file mode 100644 index ab64fa88f26..00000000000 --- a/board/atum8548/ddr.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <i2c.h> - -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> - -static void -get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); -} - -unsigned int fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - -void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - - if (ctrl_num) { - printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); - return; - } - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - get_spd(&(ctrl_dimms_spd[i]), SPD_EEPROM_ADDRESS); - } -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for clock adjust: - * - number of chips on bus - * - position of slot - * - DDR1 vs. DDR2? - * - ??? - * - * This needs to be determined on a board-by-board basis. - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - popts->clk_adjust = 7; - - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 10; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/atum8548/law.c b/board/atum8548/law.c deleted file mode 100644 index 724b1bf0b69..00000000000 --- a/board/atum8548/law.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xa000_0000 0xbfff_ffff PCIe MEM 512M - * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe10f_ffff PCI1 IO 1M - * 0xe280_0000 0xe20f_ffff PCI2 IO 1M - * 0xe300_0000 0xe30f_ffff PCIe IO 1M - * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - * - * LAW 0 is reserved for boot mapping - */ - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), - /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ - SET_LAW(CONFIG_SYS_LBC_CACHE_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/atum8548/tlb.c b/board/atum8548/tlb.c deleted file mode 100644 index ef7942cb1bf..00000000000 --- a/board/atum8548/tlb.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 Initializations */ - /* - * TLB 0, 1: 128M Non-cacheable, guarded - * 0xf8000000 128M FLASH - * Out of reset this entry is only 4K. - */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x4000000, CONFIG_SYS_FLASH_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 2: 1G Non-cacheable, guarded - * 0x80000000 1G PCI1/PCIE 8,9,a,b - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI_PHYS, CONFIG_SYS_PCI_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_1G, 1), - - /* - * TLB 3, 4: 512M Non-cacheable, guarded - * 0xc0000000 1G PCI2 - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS, CONFIG_SYS_PCI2_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI2_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 1M PCI1 IO - * 0xe210_0000 1M PCI2 IO - * 0xe300_0000 1M PCIe IO - */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_64M, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index f183cf61d24..232dc7297a0 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -157,34 +157,10 @@ static const char *serdes_clock_to_string(u32 clock) int misc_init_r(void) { serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; - __maybe_unused ccsr_gur_t *gur; u32 actual[NUM_SRDS_BANKS]; unsigned int i; u8 sw3; - gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#ifdef CONFIG_SRIO1 - if (is_serdes_configured(SRIO1)) { - set_next_law(CONFIG_SYS_RIO1_MEM_PHYS, LAW_SIZE_256M, - LAW_TRGT_IF_RIO_1); - } else { - printf (" SRIO1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); /* disable */ -#endif - -#ifdef CONFIG_SRIO2 - if (is_serdes_configured(SRIO2)) { - set_next_law(CONFIG_SYS_RIO2_MEM_PHYS, LAW_SIZE_256M, - LAW_TRGT_IF_RIO_2); - } else { - printf (" SRIO2: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); /* disable */ -#endif - /* Warn if the expected SERDES reference clocks don't match the * actual reference clocks. This needs to be done after calling * p4080_erratum_serdes8(), since that function may modify the clocks. @@ -217,24 +193,6 @@ void board_lmb_reserve(struct lmb *lmb) } #endif -void ft_srio_setup(void *blob) -{ -#ifdef CONFIG_SRIO1 - if (!is_serdes_configured(SRIO1)) { - fdt_del_node_and_alias(blob, "rio0"); - } -#else - fdt_del_node_and_alias(blob, "rio0"); -#endif -#ifdef CONFIG_SRIO2 - if (!is_serdes_configured(SRIO2)) { - fdt_del_node_and_alias(blob, "rio1"); - } -#else - fdt_del_node_and_alias(blob, "rio1"); -#endif -} - void ft_board_setup(void *blob, bd_t *bd) { phys_addr_t base; @@ -242,8 +200,6 @@ void ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); - ft_srio_setup(blob); - base = getenv_bootm_low(); size = getenv_bootm_size(); diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index 2ee018868bd..85b6c78efb1 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -288,24 +288,10 @@ void fsl_ddr_board_options(memctl_options_t *popts, phys_size_t initdram(int board_type) { phys_size_t dram_size; - int use_spd = 0; puts("Initializing...."); -#ifdef CONFIG_DDR_SPD - /* if hwconfig is not enabled, or "sdram" is not defined, use spd */ - if (hwconfig_sub("fsl_ddr", "sdram")) { - if (hwconfig_subarg_cmp("fsl_ddr", "sdram", "spd")) - use_spd = 1; - else if (hwconfig_subarg_cmp("fsl_ddr", "sdram", "fixed")) - use_spd = 0; - else - use_spd = 1; - } else - use_spd = 1; -#endif - - if (use_spd) { + if (fsl_use_spd()) { puts("using SPD\n"); dram_size = fsl_ddr_sdram(); } else { diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c index 775b623ccbb..18a75de8c10 100644 --- a/board/freescale/corenet_ds/pci.c +++ b/board/freescale/corenet_ds/pci.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -28,123 +28,9 @@ #include <fdt_support.h> #include <asm/fsl_serdes.h> -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - -#ifdef CONFIG_PCIE4 -static struct pci_controller pcie4_hose; -#endif - void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[4]; - u32 devdisr; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - - debug (" pci_init_board: devdisr=%x\n", devdisr); - -#ifdef CONFIG_PCIE1 - pcie_configured = is_serdes_configured(PCIE1); - - if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE1)) { - set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, - LAW_TRGT_IF_PCIE_1); - set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_1); - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "End Point" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - pcie_configured = is_serdes_configured(PCIE2); - - if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE2)) { - set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, - LAW_TRGT_IF_PCIE_2); - set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_2); - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to Slot 3 as %s (base addr %lx)\n", - pcie_ep ? "End Point" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE3 - pcie_configured = is_serdes_configured(PCIE3); - - if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE3)) { - set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, - LAW_TRGT_IF_PCIE_3); - set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_3); - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "End Point" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); - } else { - printf("PCIE3: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE4 - pcie_configured = is_serdes_configured(PCIE4); - - if (pcie_configured && !(devdisr & FSL_CORENET_DEVDISR_PCIE4)) { - set_next_law(CONFIG_SYS_PCIE4_MEM_PHYS, LAW_SIZE_512M, - LAW_TRGT_IF_PCIE_4); - set_next_law(CONFIG_SYS_PCIE4_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_4); - SET_STD_PCIE_INFO(pci_info[num], 4); - pcie_ep = fsl_setup_hose(&pcie4_hose, pci_info[num].regs); - printf("PCIE4: connected to as %s (base addr %lx)\n", - pcie_ep ? "End Point" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie4_hose, first_free_busno); - } else { - printf("PCIE4: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE4); /* disable */ -#endif + fsl_pcie_init_board(0); } void pci_of_setup(void *blob, bd_t *bd) diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index cf92ba1211f..f83f629d468 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -42,8 +42,6 @@ #include "../common/sgmii_riser.h" -phys_size_t fixed_sdram(void); - int board_early_init_f (void) { #ifdef CONFIG_MMC @@ -98,25 +96,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_SPD_EEPROM) /* * Fixed sdram init -- doesn't use serial presence detect. @@ -177,133 +156,35 @@ phys_size_t fixed_sdram (void) static struct pci_controller pci1_hose; #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - #ifdef CONFIG_PCI void pci_init_board(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[4]; - u32 devdisr, pordevsr, io_sel, sdrs2_io_sel; + struct fsl_pci_info pci_info; + u32 devdisr, pordevsr; u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; - int first_free_busno = 0; - int num = 0; + int first_free_busno; - int pcie_ep, pcie_configured; + first_free_busno = fsl_pcie_init_board(0); +#ifdef CONFIG_PCI1 devdisr = in_be32(&gur->devdisr); pordevsr = in_be32(&gur->pordevsr); porpllsr = in_be32(&gur->porpllsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - sdrs2_io_sel = (pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; - - debug(" pci_init_board: devdisr=%x, sdrs2_io_sel=%x, io_sel=%x\n", - devdisr, sdrs2_io_sel, io_sel); - - if (sdrs2_io_sel == 7) - printf("Serdes2 disalbed\n"); - else if (sdrs2_io_sel == 4) { - printf("eTSEC1 is in sgmii mode.\n"); - printf("eTSEC3 is in sgmii mode.\n"); - } else if (sdrs2_io_sel == 6) - printf("eTSEC1 is in sgmii mode.\n"); - - puts("\n"); -#ifdef CONFIG_PCIE3 - pcie_configured = is_serdes_configured(PCIE3); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ - set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, - LAW_TRGT_IF_PCIE_3); - set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_3); - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected to Slot3 as %s (base address %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); - } else { - printf("PCIE3: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - pcie_configured = is_serdes_configured(PCIE1); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_128M, - LAW_TRGT_IF_PCIE_1); - set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_1); - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot1 as %s (base address %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - pcie_configured = is_serdes_configured(PCIE2); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ - set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_128M, - LAW_TRGT_IF_PCIE_2); - set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCIE_2); - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to Slot 2 as %s (base address %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCI1 pci_speed = 66666000; pci_32 = 1; pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - set_next_law(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, - LAW_TRGT_IF_PCI); - set_next_law(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, - LAW_TRGT_IF_PCI); - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : @@ -311,9 +192,9 @@ void pci_init_board(void) pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", - pci_info[num].regs); + pci_info.regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI: disabled\n"); @@ -354,14 +235,12 @@ int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET struct tsec_info_struct tsec_info[2]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; - uint sdrs2_io_sel = - (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); - if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) { + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].phyaddr = 0; tsec_info[num].flags |= TSEC_SGMII; } @@ -369,7 +248,8 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (sdrs2_io_sel == 4) { + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].phyaddr = 1; tsec_info[num].flags |= TSEC_SGMII; } @@ -382,8 +262,10 @@ int board_eth_init(bd_t *bis) } #ifdef CONFIG_FSL_SGMII_RISER - if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) + if (is_serdes_configured(SGMII_TSEC1) || + is_serdes_configured(SGMII_TSEC3)) { fsl_sgmii_riser_init(tsec_info, num); + } #endif tsec_eth_init(bis, tsec_info, num); diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index d354a26f69a..c75585e28c0 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -39,8 +39,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram(void); int checkboard (void) { @@ -61,54 +59,6 @@ int checkboard (void) return 0; } - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* - * Work around to stabilize DDR DLL - */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * Initialize SDRAM. - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - - /* * Initialize Local Bus */ @@ -172,15 +122,14 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ - -void -sdram_init(void) +void lbc_sdram_init(void) { volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - puts(" SDRAM: "); - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers @@ -232,7 +181,7 @@ sdram_init(void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); diff --git a/board/freescale/mpc8540ads/tlb.c b/board/freescale/mpc8540ads/tlb.c index a9925d54277..adcc0ade0ab 100644 --- a/board/freescale/mpc8540ads/tlb.c +++ b/board/freescale/mpc8540ads/tlb.c @@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_64M, 1), -#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 59ec60446e9..0d3752d56e5 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -42,7 +42,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); /* * I/O Port configuration table @@ -242,48 +241,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -334,8 +291,7 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) @@ -345,9 +301,9 @@ sdram_init(void) uint cpu_board_rev; uint lsdmr_common; - puts(" SDRAM: "); - - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index 3d308c8e502..59e03fc92d1 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -28,15 +28,7 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), SET_LAW(CONFIG_SYS_LBC_NONCACHE_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - /* contains both PCIE3 MEM & IO space */ - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_PCIE_3), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 31c3fad869f..a48c8155c50 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -28,6 +28,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <miiphy.h> #include <libfdt.h> @@ -67,35 +68,10 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - - dram_size = fsl_ddr_sdram(); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - #ifdef CONFIG_PCIE3 static struct pci_controller pcie3_hose; #endif @@ -103,11 +79,10 @@ static struct pci_controller pcie3_hose; void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[4]; + struct fsl_pci_info pci_info; u32 devdisr, pordevsr, io_sel; u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; int first_free_busno = 0; - int num = 0; int pcie_ep, pcie_configured; @@ -118,21 +93,18 @@ void pci_init_board(void) debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - if (io_sel & 1) { - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) - printf("eTSEC1 is in sgmii mode.\n"); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - printf("eTSEC3 is in sgmii mode.\n"); - } puts("\n"); #ifdef CONFIG_PCIE3 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); + pcie_configured = is_serdes_configured(PCIE3); if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); -#ifdef CONFIG_SYS_PCIE3_MEM_BUS2 + /* contains both PCIE3 MEM & IO space */ + set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_4M, + LAW_TRGT_IF_PCIE_3); + SET_STD_PCIE_INFO(pci_info, 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info.regs); + /* outbound memory */ pci_set_region(&pcie3_hose.regions[0], CONFIG_SYS_PCIE3_MEM_BUS2, @@ -141,11 +113,11 @@ void pci_init_board(void) PCI_REGION_MEM); pcie3_hose.region_count = 1; -#endif + printf("PCIE3: connected to ULI as %s (base addr %lx)\n", pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + pci_info.regs); + first_free_busno = fsl_pci_init_port(&pci_info, &pcie3_hose, first_free_busno); /* @@ -162,64 +134,17 @@ void pci_init_board(void) #endif #ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); -#ifdef CONFIG_SYS_PCIE1_MEM_BUS2 - /* outbound memory */ - pci_set_region(&pcie1_hose.regions[0], - CONFIG_SYS_PCIE1_MEM_BUS2, - CONFIG_SYS_PCIE1_MEM_PHYS2, - CONFIG_SYS_PCIE1_MEM_SIZE2, - PCI_REGION_MEM); - - pcie1_hose.region_count = 1; -#endif - printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); + SET_STD_PCIE_INFO(pci_info, 1); + first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE1, &pci_info); #else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ + setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ #endif #ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); -#ifdef CONFIG_SYS_PCIE2_MEM_BUS2 - /* outbound memory */ - pci_set_region(&pcie2_hose.regions[0], - CONFIG_SYS_PCIE2_MEM_BUS2, - CONFIG_SYS_PCIE2_MEM_PHYS2, - CONFIG_SYS_PCIE2_MEM_SIZE2, - PCI_REGION_MEM); - - pcie2_hose.region_count = 1; -#endif - printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } - - puts("\n"); + SET_STD_PCIE_INFO(pci_info, 2); + first_free_busno = fsl_pcie_init_ctrl(first_free_busno, devdisr, PCIE2, &pci_info); #else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ + setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCI1 @@ -229,8 +154,13 @@ void pci_init_board(void) pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : @@ -238,9 +168,9 @@ void pci_init_board(void) pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", - pci_info[num].regs); + pci_info.regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI: disabled\n"); @@ -252,7 +182,6 @@ void pci_init_board(void) #endif } - int last_stage_init(void) { return 0; @@ -323,20 +252,22 @@ int board_eth_init(bd_t *bis) { #ifdef CONFIG_TSEC_ENET struct tsec_info_struct tsec_info[2]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; int num = 0; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif @@ -346,8 +277,10 @@ int board_eth_init(bd_t *bis) return 0; } - if (io_sel & 1) + if (is_serdes_configured(SGMII_TSEC1) || + is_serdes_configured(SGMII_TSEC3)) { fsl_sgmii_riser_init(tsec_info, num); + } tsec_eth_init(bis, tsec_info, num); diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c index 98748aa478c..5b6943da9e6 100644 --- a/board/freescale/mpc8548cds/law.c +++ b/board/freescale/mpc8548cds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -51,23 +51,12 @@ */ struct law_entry law_table[] = { -#ifdef CONFIG_SYS_PCI1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI), -#endif #ifdef CONFIG_SYS_PCI2_MEM_PHYS SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_2), #endif -#ifdef CONFIG_SYS_PCIE1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), -#endif /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_RIO_MEM_PHYS - SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index 14c902cb960..f5c799b9f9d 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -29,6 +29,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <miiphy.h> #include <libfdt.h> @@ -41,7 +42,6 @@ DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); -void sdram_init(void); int checkboard (void) { @@ -74,43 +74,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -148,8 +111,7 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) @@ -159,9 +121,9 @@ sdram_init(void) uint cpu_board_rev; uint lsdmr_common; - puts(" SDRAM: "); - - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers @@ -253,20 +215,13 @@ static struct pci_controller pci1_hose = { static struct pci_controller pci2_hose; #endif /* CONFIG_PCI2 */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[4]; + struct fsl_pci_info pci_info; u32 devdisr, pordevsr, io_sel; u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; devdisr = in_be32(&gur->devdisr); pordevsr = in_be32(&gur->pordevsr); @@ -282,8 +237,13 @@ void pci_init_board(void) pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : @@ -291,9 +251,9 @@ void pci_init_board(void) pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", - pci_info[num].regs); + pci_info.regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); #ifdef CONFIG_PCIX_CHECK @@ -331,26 +291,7 @@ void pci_init_board(void) setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */ #endif /* CONFIG_PCI2 */ -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(first_free_busno); } int last_stage_init(void) diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c index 2267ad7478c..b2c1b31af65 100644 --- a/board/freescale/mpc8548cds/tlb.c +++ b/board/freescale/mpc8548cds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -58,21 +58,20 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1G, 1), -#ifdef CONFIG_SYS_RIO_MEM_PHYS /* * TLB 2: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT, CONFIG_SYS_RIO_MEM_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT, CONFIG_SYS_SRIO1_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), /* * TLB 3: 256M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_VIRT + 0x10000000, CONFIG_SYS_RIO_MEM_PHYS + 0x10000000, + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO1_MEM_VIRT + 0x10000000, CONFIG_SYS_SRIO1_MEM_PHYS + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), -#endif + /* * TLB 5: 64M Non-cacheable, guarded * 0xe000_0000 1M CCSRBAR diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index edaba26f533..60d1758afea 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -40,7 +40,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); #endif void local_bus_init(void); -void sdram_init(void); /* * I/O Port configuration table @@ -240,50 +239,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -334,8 +289,7 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) @@ -345,9 +299,9 @@ sdram_init(void) uint cpu_board_rev; uint lsdmr_common; - puts(" SDRAM: "); - - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 2ae0459fec0..1a165bff869 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -44,8 +44,6 @@ extern void ddr_enable_ecc(unsigned int dram_size); void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram(void); /* @@ -266,54 +264,6 @@ int checkboard (void) return 0; } - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* - * Work around to stabilize DDR DLL - */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - - dram_size *= 0x100000; -#else - dram_size = fixed_sdram(); -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - /* - * Initialize SDRAM. - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - - /* * Initialize Local Bus */ @@ -377,15 +327,14 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ - -void -sdram_init(void) +void lbc_sdram_init(void) { volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - puts(" SDRAM: "); - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers @@ -437,7 +386,7 @@ sdram_init(void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #ifndef CONFIG_SYS_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); diff --git a/board/freescale/mpc8560ads/tlb.c b/board/freescale/mpc8560ads/tlb.c index a9925d54277..adcc0ade0ab 100644 --- a/board/freescale/mpc8560ads/tlb.c +++ b/board/freescale/mpc8560ads/tlb.c @@ -106,25 +106,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_16K, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 8, 9: 128M DDR - * 0x00000000 64M DDR System memory - * 0x04000000 64M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ -#error("Update the number of table entries in tlb1_entry") - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_64M, 1), -#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c index 3114e8a173e..c5cf7ba812a 100644 --- a/board/freescale/mpc8568mds/law.c +++ b/board/freescale/mpc8568mds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2010-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -50,11 +50,6 @@ */ struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), /* LBC window - maps 256M. That's SDRAM, BCSR, PIBs, and Flash */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index d74fcac9835..5cda81c318e 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -29,6 +29,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <i2c.h> #include <ioports.h> @@ -100,7 +101,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { }; void local_bus_init(void); -void sdram_init(void); int board_early_init_f (void) { @@ -137,43 +137,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay(200); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -208,8 +171,7 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) @@ -218,9 +180,9 @@ sdram_init(void) uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; - puts(" SDRAM: "); - - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); + puts("LBC SDRAM: "); + print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + "\n "); /* * Setup SDRAM Base and Option Registers @@ -304,10 +266,6 @@ static struct pci_controller pci1_hose = { }; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - /* * pib_init() -- Initialize the PCA9555 IO expander on the PIB board */ @@ -354,13 +312,11 @@ pib_init(void) void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[2]; + int first_free_busno = 0; +#ifdef CONFIG_PCI1 + struct fsl_pci_info pci_info; u32 devdisr, pordevsr, io_sel; u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; devdisr = in_be32(&gur->devdisr); pordevsr = in_be32(&gur->pordevsr); @@ -369,15 +325,19 @@ void pci_init_board(void) debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); -#ifdef CONFIG_PCI1 pci_speed = 66666000; pci_32 = 1; pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : @@ -385,9 +345,9 @@ void pci_init_board(void) pci_clk_sel ? "sync" : "async", pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter", - pci_info[num].regs); + pci_info.regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI: disabled\n"); @@ -398,26 +358,7 @@ void pci_init_board(void) setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ #endif -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(first_free_busno); } #endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8569mds/law.c b/board/freescale/mpc8569mds/law.c index 60eea45a845..4f4a93b8f8a 100644 --- a/board/freescale/mpc8569mds/law.c +++ b/board/freescale/mpc8569mds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -51,10 +51,7 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR), #endif - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index dc0884e7bf1..ecda2229902 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -31,6 +31,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <spd_sdram.h> #include <i2c.h> @@ -44,8 +45,6 @@ #include "../common/pq-mds-pib.h" #endif -phys_size_t fixed_sdram(void); - const qe_iop_conf_t qe_iop_conf_tab[] = { /* QE_MUX_MDC */ {2, 31, 1, 0, 1}, /* QE_MUX_MDC */ @@ -244,40 +243,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - volatile ccsr_gur_t *gur = - (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - out_be32(&gur->ddrdllcr, 0x81000000); - udelay(200); -#endif - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_SPD_EEPROM) phys_size_t fixed_sdram(void) { @@ -553,51 +518,14 @@ static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd) clrbits_8(&bcsr[17], BCSR17_nUSBEN); } -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - #ifdef CONFIG_PCI void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[1]; - u32 devdisr, pordevsr, io_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - #if defined(CONFIG_PQ_MDS_PIB) pib_init(); #endif -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif - + fsl_pcie_init_board(0); } #endif /* CONFIG_PCI */ diff --git a/board/freescale/mpc8572ds/config.mk b/board/freescale/mpc8572ds/config.mk index 5413921a20e..7fd64123df5 100644 --- a/board/freescale/mpc8572ds/config.mk +++ b/board/freescale/mpc8572ds/config.mk @@ -1,5 +1,5 @@ # -# Copyright 2007-2008 Freescale Semiconductor, Inc. +# Copyright 2007-2008,2010 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -23,4 +23,10 @@ # # mpc8572ds board # +ifndef NAND_SPL +ifeq ($(CONFIG_NAND), y) +LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds +endif +endif + RESET_VECTOR_ADDRESS = 0xeffffffc diff --git a/board/freescale/mpc8572ds/law.c b/board/freescale/mpc8572ds/law.c index e13bb533661..7c63f847d3c 100644 --- a/board/freescale/mpc8572ds/law.c +++ b/board/freescale/mpc8572ds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,12 +29,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 120f35c2c84..4b2ef4e5e6c 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -30,6 +30,7 @@ #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> #include <asm/io.h> +#include <asm/fsl_serdes.h> #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> @@ -38,8 +39,6 @@ #include "../common/sgmii_riser.h" -long int fixed_sdram(void); - int checkboard (void) { u8 vboot; @@ -73,23 +72,6 @@ int checkboard (void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_SPD_EEPROM - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} #if !defined(CONFIG_SPD_EEPROM) /* @@ -147,116 +129,34 @@ phys_size_t fixed_sdram (void) #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - #ifdef CONFIG_PCI void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[3]; - u32 devdisr, pordevsr, io_sel, temp32; - int first_free_busno = 0; - int num = 0; + struct pci_controller *hose; + + fsl_pcie_init_board(0); + + hose = find_hose_by_cfg_addr((void *)(CONFIG_SYS_PCIE3_ADDR)); + + if (hose) { + u32 temp32; + u8 uli_busno = hose->first_busno + 2; - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) - printf("eTSEC1 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - printf("eTSEC2 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - printf("eTSEC3 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) - printf("eTSEC4 is in sgmii mode.\n"); - - puts("\n"); -#ifdef CONFIG_PCIE3 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){ - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); /* * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. * Device 1d has the first on-board memory BAR. */ - pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0), + pci_hose_read_config_dword(hose, PCI_BDF(uli_busno, 0x1d, 0), PCI_BASE_ADDRESS_1, &temp32); + if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { - void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), + void *p = pci_mem_to_virt(PCI_BDF(uli_busno, 0x1d, 0), temp32, 4, 0); debug(" uli1572 read to %p\n", p); in_be32(p); } - } else { - printf("PCIE3: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){ - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif } #endif @@ -288,31 +188,38 @@ int board_early_init_r(void) int board_eth_init(bd_t *bis) { struct tsec_info_struct tsec_info[4]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; #ifdef CONFIG_TSEC1 SET_STD_TSEC_INFO(tsec_info[num], 1); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS)) + if (is_serdes_configured(SGMII_TSEC1)) { + puts("eTSEC1 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC2 SET_STD_TSEC_INFO(tsec_info[num], 2); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (is_serdes_configured(SGMII_TSEC2)) { + puts("eTSEC2 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC4 SET_STD_TSEC_INFO(tsec_info[num], 4); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS)) + if (is_serdes_configured(SGMII_TSEC4)) { + puts("eTSEC4 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c index 6a2a0b57f53..575bdb55ab8 100644 --- a/board/freescale/mpc8572ds/tlb.c +++ b/board/freescale/mpc8572ds/tlb.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -85,6 +85,18 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_4K, 1), + +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, + CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 9, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_256K, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8610hpcd/law.c b/board/freescale/mpc8610hpcd/law.c index 0fc83848472..26e41b6ab72 100644 --- a/board/freescale/mpc8610hpcd/law.c +++ b/board/freescale/mpc8610hpcd/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008,2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -31,14 +31,8 @@ struct law_entry law_table[] = { #if !defined(CONFIG_SPD_EEPROM) SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR_1), #endif - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), SET_LAW(PIXIS_BASE, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_FLASH_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_PCI_1) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c index 61a635de78d..d7dd470c3ff 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c @@ -27,6 +27,7 @@ #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <i2c.h> #include <asm/io.h> #include <libfdt.h> @@ -212,82 +213,34 @@ config_table:pci_mpc86xxcts_config_table }; #endif /* CONFIG_PCI */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - void pci_init_board(void) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; - struct fsl_pci_info pci_info[3]; - u32 devdisr, pordevsr, io_sel; - int first_free_busno = 0; - int num = 0; - - int pci_agent, pcie_ep, pcie_configured; + struct fsl_pci_info pci_info; + u32 devdisr, pordevsr; + int first_free_busno; + int pci_agent; devdisr = in_be32(&gur->devdisr); pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC8610_PORDEVSR_IO_SEL) - >> MPC8610_PORDEVSR_IO_SEL_SHIFT; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE1); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){ - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to Slot as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCIE2); /* disable */ -#endif + first_free_busno = fsl_pcie_init_board(0); #ifdef CONFIG_PCI1 if (!(devdisr & MPC86xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI: connected to PCI slots as %s" \ " (base address %lx)\n", pci_agent ? "Agent" : "Host", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + pci_info.regs); + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI: disabled\n"); @@ -297,6 +250,8 @@ void pci_init_board(void) #else setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_PCI1); /* disable */ #endif + + fsl_pcie_init_board(first_free_busno); } #if defined(CONFIG_OF_BOARD_SETUP) diff --git a/board/freescale/mpc8641hpcn/law.c b/board/freescale/mpc8641hpcn/law.c index 8c8ce9585a3..08f1eb25adf 100644 --- a/board/freescale/mpc8641hpcn/law.c +++ b/board/freescale/mpc8641hpcn/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008,2010 Freescale Semiconductor, Inc. + * Copyright 2008,2010-2011 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -53,14 +53,6 @@ struct law_entry law_table[] = { #if !defined(CONFIG_SPD_EEPROM) SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1), #endif -#ifdef CONFIG_PCI - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI_2), -#elif defined(CONFIG_RIO) - SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO), -#endif SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 882ff0bf2d1..166ff0c97b0 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -26,6 +26,7 @@ #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <libfdt.h> #include <fdt_support.h> @@ -126,66 +127,18 @@ fixed_sdram(void) } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -#if defined(CONFIG_PCI) -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif /* CONFIG_PCIE2 */ - -int first_free_busno = 0; - void pci_init_board(void) { - struct fsl_pci_info pci_info[2]; - int pcie_ep; - int num = 0; + fsl_pcie_init_board(0); #ifdef CONFIG_PCIE1 - volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) - >> MPC8641_PORDEVSR_IO_SEL_SHIFT; - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - /* * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. */ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000))); - - } else { - puts("PCIE1: disabled\n"); - } -#else - puts("PCIE1: disabled\n"); #endif /* CONFIG_PCIE1 */ - -#ifdef CONFIG_PCIE2 - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); -#else - puts("PCIE2: disabled\n"); -#endif /* CONFIG_PCIE2 */ - } diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 7cb549b1bfb..0ea0bdf28e9 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -76,19 +76,6 @@ int checkboard(void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing....\n"); - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000) * 0x100000; - - puts(" DDR: "); - return dram_size; -} - #define CONFIG_TFP410_I2C_ADDR 0x38 /* Masks for the SSI_TDM and AUDCLK bits of the ngPIXIS BRDCFG1 register. */ @@ -200,7 +187,7 @@ static u8 serdes_dev_slot[][SATA2 + 1] = { * Returns the name of the slot to which the PCIe or SATA controller is * connected */ -const char *serdes_slot_name(enum srds_prtcl device) +const char *board_serdes_name(enum srds_prtcl device) { ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; u32 pordevsr = in_be32(&gur->pordevsr); @@ -215,73 +202,10 @@ const char *serdes_slot_name(enum srds_prtcl device) return "Nothing"; } -static void configure_pcie(struct fsl_pci_info *info, - struct pci_controller *hose, - const char *connected) -{ - static int bus_number = 0; - int is_endpoint; - - set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); - set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); - is_endpoint = fsl_setup_hose(hose, info->regs); - printf("PCIE%u: connected to %s as %s (base addr %lx)\n", - info->pci_num, connected, - is_endpoint ? "Endpoint" : "Root Complex", info->regs); - bus_number = fsl_pci_init_port(info, hose, bus_number); -} - -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - #ifdef CONFIG_PCI void pci_init_board(void) { - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - struct fsl_pci_info pci_info; - u32 devdisr = in_be32(&gur->devdisr); - -#ifdef CONFIG_PCIE1 - if (is_serdes_configured(PCIE1) && !(devdisr & MPC85xx_DEVDISR_PCIE)) { - SET_STD_PCIE_INFO(pci_info, 1); - configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1)); - } else { - printf("PCIE1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif - -#ifdef CONFIG_PCIE2 - if (is_serdes_configured(PCIE2) && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { - SET_STD_PCIE_INFO(pci_info, 2); - configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2)); - } else { - printf("PCIE2: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE3 - if (is_serdes_configured(PCIE3) && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { - SET_STD_PCIE_INFO(pci_info, 3); - configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3)); - } else { - printf("PCIE3: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ -#endif + fsl_pcie_init_board(0); } #endif diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 15b46b0da15..e54fde25309 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -239,19 +239,6 @@ phys_size_t fixed_sdram (void) fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); return ddr_size; } - -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - dram_size = fixed_sdram(); - set_ddr_laws(0, dram_size, LAW_TRGT_IF_DDR_1); - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts("DDR: "); - return dram_size; -} diff --git a/board/freescale/p1_p2_rdb/law.c b/board/freescale/p1_p2_rdb/law.c index 1320d5da041..4c80fa6ed41 100644 --- a/board/freescale/p1_p2_rdb/law.c +++ b/board/freescale/p1_p2_rdb/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -26,10 +26,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 1c4c0200e8a..440fcb924a6 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -26,6 +26,7 @@ #include <asm/mmu.h> #include <asm/cache.h> #include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <miiphy.h> #include <libfdt.h> @@ -166,10 +167,8 @@ int board_early_init_r(void) int board_eth_init(bd_t *bis) { struct tsec_info_struct tsec_info[4]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; char *tmp; - u32 pordevsr; unsigned int vscfw_addr; #ifdef CONFIG_TSEC1 @@ -182,9 +181,10 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - pordevsr = in_be32(&gur->pordevsr); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif if (!num) { diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index 2a2d6b702fb..bd1a91e313a 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -24,6 +24,7 @@ #include <command.h> #include <pci.h> #include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <asm/fsl_pci.h> #include <libfdt.h> @@ -31,71 +32,9 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[2]; - u32 devdisr, pordevsr, io_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - printf("eTSEC2 is in sgmii mode.\n"); - - puts("\n"); -#ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(0); } void ft_pci_board_setup(void *blob) diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c index 28ed2ed5ee8..91642a9837e 100644 --- a/board/freescale/p2020ds/law.c +++ b/board/freescale/p2020ds/law.c @@ -1,5 +1,5 @@ /* - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2010 Freescale Semiconductor, Inc. * * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,12 +29,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3), SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), }; diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index b05ef989b91..8546aa903f0 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -30,6 +30,7 @@ #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> #include <asm/io.h> +#include <asm/fsl_serdes.h> #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> @@ -43,8 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; -phys_size_t fixed_sdram(void); - int checkboard(void) { u8 sw; @@ -69,31 +68,6 @@ int checkboard(void) return 0; } -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = 0; - - puts("Initializing...."); - -#ifdef CONFIG_DDR_SPD - dram_size = fsl_ddr_sdram(); -#else - dram_size = fixed_sdram(); - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - dram_size, - LAW_TRGT_IF_DDR) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; -#endif - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - puts(" DDR: "); - return dram_size; -} - #if !defined(CONFIG_DDR_SPD) /* * Fixed sdram init -- doesn't use serial presence detect. @@ -169,123 +143,22 @@ phys_size_t fixed_sdram(void) udelay(500); #endif + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE * 1024 * 1024, + LAW_TRGT_IF_DDR) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + }; + return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; } #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif - -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - #ifdef CONFIG_PCI void pci_init_board(void) { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[3]; - u32 devdisr, pordevsr, io_sel; - int first_free_busno = 0; - int num = 0; - - int pcie_ep, pcie_configured; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) - printf("eTSEC2 is in sgmii mode.\n"); - if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) - printf("eTSEC3 is in sgmii mode.\n"); - - puts("\n"); -#ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) { - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected to ULI as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - - /* - * The workaround doesn't work on p2020 because the location - * we try and read isn't valid on p2020, fix this later - */ -#if 0 - /* - * Activate ULI1575 legacy chip by performing a fake - * memory access. Needed to make ULI RTC work. - * Device 1d has the first on-board memory BAR. - */ - - pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0), - PCI_BASE_ADDRESS_1, &temp32); - if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) { - void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0), - temp32, 4, 0); - debug(" uli1575 read to %p\n", p); - in_be32(p); - } -#endif - } else { - printf("PCIE2: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */ -#endif - -#ifdef CONFIG_PCIE3 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) { - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); - } else { - printf("PCIE3: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */ -#endif - -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(0); } #endif @@ -317,7 +190,6 @@ int board_early_init_r(void) int board_eth_init(bd_t *bis) { struct tsec_info_struct tsec_info[4]; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int num = 0; #ifdef CONFIG_TSEC1 @@ -326,14 +198,18 @@ int board_eth_init(bd_t *bis) #endif #ifdef CONFIG_TSEC2 SET_STD_TSEC_INFO(tsec_info[num], 2); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS)) + if (is_serdes_configured(SGMII_TSEC2)) { + puts("eTSEC2 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; + } num++; #endif #ifdef CONFIG_TSEC3 SET_STD_TSEC_INFO(tsec_info[num], 3); - if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS)) + if (is_serdes_configured(SGMII_TSEC3)) { + puts("eTSEC3 is in sgmii mode.\n"); tsec_info[num].flags |= TSEC_SGMII; +} num++; #endif diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile deleted file mode 100644 index 5eccfab69ee..00000000000 --- a/board/mpc8540eval/Makefile +++ /dev/null @@ -1,54 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += law.o -COBJS-y += tlb.o -COBJS-y += flash.o -COBJS-$(CONFIG_FSL_DDR1) += ddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mpc8540eval/ddr.c b/board/mpc8540eval/ddr.c deleted file mode 100644 index 7850794d64f..00000000000 --- a/board/mpc8540eval/ddr.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <i2c.h> - -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> - -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/mpc8540eval/flash.c b/board/mpc8540eval/flash.c deleted file mode 100644 index 9df5bd9a4c0..00000000000 --- a/board/mpc8540eval/flash.c +++ /dev/null @@ -1,894 +0,0 @@ -/* - * (C) Copyright 2003 Motorola Inc. - * Xianghua Xiao,(X.Xiao@motorola.com) - * - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2001, Stuart Hughes, Lineo Inc, stuarth@lineo.com - * Add support the Sharp chips on the mpc8260ads. - * I started with board/ip860/flash.c and made changes I found in - * the MTD project by David Schleef. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#if !defined(CONFIG_SYS_NO_FLASH) - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/* - * The variable should be in the flash info structure. Since it - * is only used in this board specific file it is declared here. - * In the future I think an endian flag should be part of the - * flash_info_t structure. (Ron Alder) - */ -static ulong big_endian = 0; - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_block (flash_info_t *info, uchar * src, ulong dest, ulong cnt); -static int write_short (flash_info_t *info, ulong dest, ushort data); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static int clear_block_lock_bit(flash_info_t *info, vu_long * addr); -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size; - int i; - - /* Init: enable write, - * or we cannot even write flash commands - */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - - /* set the default sector offset */ - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size<<20); - } - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size; - -#if !defined(CONFIG_RAM_AS_FLASH) -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif -#endif - return (size); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("Intel "); break; - case FLASH_MAN_SHARP: printf ("Sharp "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F016SV: printf ("28F016SV (16 Mbit, 32 x 64k)\n"); - break; - case FLASH_28F160S3: printf ("28F160S3 (16 Mbit, 32 x 512K)\n"); - break; - case FLASH_28F320S3: printf ("28F320S3 (32 Mbit, 64 x 512K)\n"); - break; - case FLASH_LH28F016SCT: printf ("28F016SC (16 Mbit, 32 x 64K)\n"); - break; - case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 64 x 128K)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - - /* only deal with 16 bit and 32 bit port width, 16bit chip */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value,va,vb,vc,vd; - ulong base = (ulong)addr; - ulong sector_offset; - -#ifdef DEBUG - printf("Check flash at 0x%08x\n",(uint)addr); -#endif - /* Write "Intelligent Identifier" command: read Manufacturer ID */ - *addr = 0x90909090; - udelay(20); - asm("sync"); - -#ifndef CONFIG_SYS_FLASH_CFI - printf("Not define CONFIG_SYS_FLASH_CFI\n"); - return (0); -#else - value = addr[0]; - va=(value & 0xFF000000)>>24; - vb=(value & 0x00FF0000)>>16; - vc=(value & 0x0000FF00)>>8; - vd=(value & 0x000000FF); - if ((va==0) && (vb==0)) { - printf("cannot identify Flash\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - else if ((va==0) && (vb!=0)) { - big_endian = 1; - info->chipwidth = FLASH_CFI_BY16; - if(vb == vd) info->portwidth = FLASH_CFI_32BIT; - else info->portwidth = FLASH_CFI_16BIT; - } - else if ((va!=0) && (vb==0)) { - big_endian = 0; - info->chipwidth = FLASH_CFI_BY16; - if(va == vc) info->portwidth = FLASH_CFI_32BIT; - else info->portwidth = FLASH_CFI_16BIT; - } - else if ((va!=0) && (vb!=0)) { - big_endian = 1; /* no meaning for 8bit chip */ - info->chipwidth = FLASH_CFI_BY8; - if(va == vb) info->portwidth = FLASH_CFI_16BIT; - else info->portwidth = FLASH_CFI_8BIT; - } -#ifdef DEBUG - switch (info->portwidth) { - case FLASH_CFI_8BIT: - printf("port width is 8 bit.\n"); - break; - case FLASH_CFI_16BIT: - printf("port width is 16 bit, "); - break; - case FLASH_CFI_32BIT: - printf("port width is 32 bit, "); - break; - } - switch (info->chipwidth) { - case FLASH_CFI_BY16: - printf("chip width is 16 bit, "); - switch (big_endian) { - case 0: - printf("Little Endian.\n"); - break; - case 1: - printf("Big Endian.\n"); - break; - } - break; - } -#endif -#endif /*#ifdef CONFIG_SYS_FLASH_CFI*/ - - if (big_endian==0) value = (addr[0] & 0xFF000000) >>8; - else value = (addr[0] & 0x00FF0000); -#ifdef DEBUG - printf("manufacturer=0x%x\n",(uint)(value>>16)); -#endif - switch (value) { - case MT_MANUFACT & 0xFFFF0000: /* SHARP, MT or => Intel */ - case INTEL_ALT_MANU & 0xFFFF0000: - info->flash_id = FLASH_MAN_INTEL; - break; - default: - printf("unknown manufacturer: %x\n", (unsigned int)value); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - if (info->portwidth==FLASH_CFI_16BIT) { - switch (big_endian) { - case 0: - value = (addr[0] & 0x0000FF00)>>8; - break; - case 1: - value = (addr[0] & 0x000000FF); - break; - } - } - else if (info->portwidth == FLASH_CFI_32BIT) { - switch (big_endian) { - case 0: - value = (addr[1] & 0x0000FF00)>>8; - break; - case 1: - value = (addr[1] & 0x000000FF); - break; - } - } - -#ifdef DEBUG - printf("deviceID=0x%x\n",(uint)value); -#endif - switch (value) { - case (INTEL_ID_28F016S & 0x0000FFFF): - info->flash_id += FLASH_28F016SV; - info->sector_count = 32; - sector_offset = 0x10000; - break; /* => 2 MB */ - - case (INTEL_ID_28F160S3 & 0x0000FFFF): - info->flash_id += FLASH_28F160S3; - info->sector_count = 32; - sector_offset = 0x10000; - break; /* => 2 MB */ - - case (INTEL_ID_28F320S3 & 0x0000FFFF): - info->flash_id += FLASH_28F320S3; - info->sector_count = 64; - sector_offset = 0x10000; - break; /* => 4 MB */ - - case (INTEL_ID_28F640J3A & 0x0000FFFF): - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - sector_offset = 0x20000; - break; /* => 8 MB */ - - case SHARP_ID_28F016SCL & 0x0000FFFF: - case SHARP_ID_28F016SCZ & 0x0000FFFF: - info->flash_id = FLASH_MAN_SHARP | FLASH_LH28F016SCT; - info->sector_count = 32; - sector_offset = 0x10000; - break; /* => 2 MB */ - - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - sector_offset = sector_offset * (info->portwidth / info->chipwidth); - info->size = info->sector_count * sector_offset; - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base; - base += sector_offset; - /* don't know how to check sector protection */ - info->protect[i] = 0; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (vu_long *)info->start[0]; - *addr = 0xFFFFFF; /* reset bank to read array mode */ - asm("sync"); - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong start, now, last, ready, erase_err_status; - - if (big_endian == 1) { - ready = 0x0080; - erase_err_status = 0x00a0; - } - else { - ready = 0x8000; - erase_err_status = 0xa000; - } - if ((info->portwidth / info->chipwidth)==2) { - ready += (ready <<16); - erase_err_status += (erase_err_status <<16); - } - -#ifdef DEBUG - printf ("\nReady flag is 0x%lx\nErase error flag is 0x%lx", ready, erase_err_status); -#endif - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ( ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_INTEL) - && ((info->flash_id & FLASH_VENDMASK) != FLASH_MAN_SHARP) ) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - -#ifdef DEBUG - printf("\nFlash Erase:\n"); -#endif - /* Make Sure Block Lock Bit is not set. */ - if(clear_block_lock_bit(info, (vu_long *)(info->start[s_first]))){ - return 1; - } - - /* Start erase on unprotected sectors */ -#if defined(DEBUG) - printf("Begin to erase now,s_first=0x%x s_last=0x%x...\n",s_first,s_last); -#endif - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - vu_short *addr16 = (vu_short *)(info->start[sect]); - vu_long *addr = (vu_long *)(info->start[sect]); - printf("."); - switch (info->portwidth) { - case FLASH_CFI_16BIT: - asm("sync"); - last = start = get_timer (0); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - /* Reset Array */ - *addr16 = 0xffff; - asm("sync"); - /* Clear Status Register */ - *addr16 = 0x5050; - asm("sync"); - /* Single Block Erase Command */ - *addr16 = 0x2020; - asm("sync"); - /* Confirm */ - *addr16 = 0xD0D0; - asm("sync"); - if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { - /* Resume Command, as per errata update */ - *addr16 = 0xD0D0; - asm("sync"); - } - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - /* wait at least 80us - let's wait 1 ms */ - *addr16 = 0x7070; - udelay (1000); - while ((*addr16 & ready) != ready) { - if((*addr16 & erase_err_status)== erase_err_status){ - printf("Error in Block Erase - Lock Bit may be set!\n"); - printf("Status Register = 0x%X\n", (uint)*addr16); - *addr16 = 0xFFFF; /* reset bank */ - asm("sync"); - return 1; - } - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr16 = 0xFFFF; /* reset bank */ - asm("sync"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - /* reset to read mode */ - *addr16 = 0xFFFF; - asm("sync"); - break; - case FLASH_CFI_32BIT: - asm("sync"); - last = start = get_timer (0); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - /* Reset Array */ - *addr = 0xffffffff; - asm("sync"); - /* Clear Status Register */ - *addr = 0x50505050; - asm("sync"); - /* Single Block Erase Command */ - *addr = 0x20202020; - asm("sync"); - /* Confirm */ - *addr = 0xD0D0D0D0; - asm("sync"); - if((info->flash_id & FLASH_TYPEMASK) != FLASH_LH28F016SCT) { - /* Resume Command, as per errata update */ - *addr = 0xD0D0D0D0; - asm("sync"); - } - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - /* wait at least 80us - let's wait 1 ms */ - *addr = 0x70707070; - udelay (1000); - while ((*addr & ready) != ready) { - if((*addr & erase_err_status)==erase_err_status){ - printf("Error in Block Erase - Lock Bit may be set!\n"); - printf("Status Register = 0x%X\n", (uint)*addr); - *addr = 0xFFFFFFFF; /* reset bank */ - asm("sync"); - return 1; - } - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = 0xFFFFFFFF; /* reset bank */ - asm("sync"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - /* reset to read mode */ - *addr = 0xFFFFFFFF; - asm("sync"); - break; - } /* end switch */ - } /* end if */ - } /* end for */ - - printf ("flash erase done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -#define FLASH_BLOCK_SIZE 32 - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data, count, temp; -/* ulong temp[FLASH_BLOCK_SIZE/4];*/ - int i, l, rc; - - count = cnt; - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - cp = wp; - /* handle unaligned block bytes , flash block size = 16bytes */ - wp = (cp+FLASH_BLOCK_SIZE-1) & ~(FLASH_BLOCK_SIZE-1); - if ((wp-cp)>=cnt) { - if ((rc = write_block(info,src,cp,wp-cp)) !=0) - return (rc); - src += wp-cp; - cnt -= wp-cp; - } - /* handle aligned block bytes */ - temp = 0; - printf("\n"); - while ( cnt >= FLASH_BLOCK_SIZE) { - if ((rc = write_block(info,src,cp,FLASH_BLOCK_SIZE)) !=0) { - return (rc); - } - src += FLASH_BLOCK_SIZE; - cp += FLASH_BLOCK_SIZE; - cnt -= FLASH_BLOCK_SIZE; - if (((count-cnt)>>10)>temp) { - temp=(count-cnt)>>10; - printf("\r%lu KB",temp); - } - } - printf("\n"); - wp = cp; - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} -#undef FLASH_BLOCK_SIZE - -/*----------------------------------------------------------------------- - * Write block to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * -1 Error - */ -static int write_block(flash_info_t *info, uchar * src, ulong dest, ulong cnt) -{ - vu_short *baddr, *addr = (vu_short *)dest; - ushort data; - ulong start, now, xsr,csr, ready; - int flag; - - if (cnt==0) return 0; - else if(cnt != (cnt& ~1)) return -1; - - /* Check if Flash is (sufficiently) erased */ - data = * src; - data = (data<<8) | *(src+1); - if ((*addr & data) != data) { - return (2); - } - if (big_endian == 1) { - ready = 0x0080; - } - else { - ready = 0x8000; - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - do { - /* Write Command */ - *addr = 0xe8e8; - asm("sync"); - xsr = *addr; - asm("sync"); - } while (!(xsr & ready)); /*wait until read */ - /*write count=BLOCK SIZE -1 */ - data=(cnt>>1)-1; - data=(data<<8)|data; - *addr = data; /* word mode, cnt/2 */ - asm("sync"); - baddr = addr; - while(cnt) { - data = * src++; - data = (data<<8) | *src++; - asm("sync"); - *baddr = data; - asm("sync"); - ++baddr; - cnt = cnt -2; - } - *addr = 0xd0d0; /* confirm write */ - start = get_timer(0); - asm("sync"); - if (flag) - enable_interrupts(); - /* data polling for D7 */ - flag = 0; - while (((csr = *addr) & ready) != ready) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - } - if (csr & 0x4040) { - printf ("CSR indicates write error (%04lx) at %08lx\n", - csr, (ulong)addr); - flag = 1; - } - /* Clear Status Registers Command */ - *addr = 0x5050; - asm("sync"); - /* Reset to read array mode */ - *addr = 0xFFFF; - asm("sync"); - return (flag); -} - - -/*----------------------------------------------------------------------- - * Write a short word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_short (flash_info_t *info, ulong dest, ushort data) -{ - vu_short *addr = (vu_short *)dest; - ulong start, now, csr, ready; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Write Command */ - *addr = 0x1010; - start = get_timer (0); - asm("sync"); - /* Write Data */ - *addr = data; - asm("sync"); - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - if (big_endian == 1) { - ready = 0x0080; - } - else { - ready = 0x8000; - } - /* data polling for D7 */ - flag = 0; - while (((csr = *addr) & ready) != ready) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - } - if (csr & 0x4040) { - printf ("CSR indicates write error (%04lx) at %08lx\n", - csr, (ulong)addr); - flag = 1; - } - /* Clear Status Registers Command */ - *addr = 0x5050; - asm("sync"); - /* Reset to read array mode */ - *addr = 0xFFFF; - asm("sync"); - return (flag); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)dest; - ulong start, csr, ready; - int flag=0; - - switch (info->portwidth) { - case FLASH_CFI_32BIT: - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - if (big_endian == 1) { - ready = 0x0080; - } - else { - ready = 0x8000; - } - if ((info->portwidth / info->chipwidth)==2) { - ready += (ready <<16); - } - else { - ready = ready << 16; - } - /* Write Command */ - *addr = 0x10101010; - asm("sync"); - /* Write Data */ - *addr = data; - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - /* data polling for D7 */ - start = get_timer (0); - flag = 0; - while (((csr = *addr) & ready) != ready) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - } - if (csr & 0x40404040) { - printf ("CSR indicates write error (%08lx) at %08lx\n", csr, (ulong)addr); - flag = 1; - } - /* Clear Status Registers Command */ - *addr = 0x50505050; - asm("sync"); - /* Reset to read array mode */ - *addr = 0xFFFFFFFF; - asm("sync"); - break; - case FLASH_CFI_16BIT: - flag = write_short (info, dest, (unsigned short) (data>>16)); - if (flag == 0) - flag = write_short (info, dest+2, (unsigned short) (data)); - break; - } - return (flag); -} - -/*----------------------------------------------------------------------- - * Clear Block Lock Bit, returns: - * 0 - OK - * 1 - Timeout - */ - -static int clear_block_lock_bit(flash_info_t * info, vu_long * addr) -{ - ulong start, now, ready; - - /* Reset Array */ - *addr = 0xffffffff; - asm("sync"); - /* Clear Status Register */ - *addr = 0x50505050; - asm("sync"); - - *addr = 0x60606060; - asm("sync"); - *addr = 0xd0d0d0d0; - asm("sync"); - - - if (big_endian == 1) { - ready = 0x0080; - } - else { - ready = 0x8000; - } - if ((info->portwidth / info->chipwidth)==2) { - ready += (ready <<16); - } - else { - ready = ready << 16; - } -#ifdef DEBUG - printf ("%s: Ready flag is 0x%8lx\n", __FUNCTION__, ready); -#endif - *addr = 0x70707070; /* read status */ - start = get_timer (0); - while((*addr & ready) != ready){ - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout on clearing Block Lock Bit\n"); - *addr = 0xFFFFFFFF; /* reset bank */ - asm("sync"); - return 1; - } - } - return 0; -} - -#endif /* !CONFIG_SYS_NO_FLASH */ diff --git a/board/mpc8540eval/law.c b/board/mpc8540eval/law.c deleted file mode 100644 index 9926d25ef1e..00000000000 --- a/board/mpc8540eval/law.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* LAW(Local Access Window) configuration: - * 0000_0000-0800_0000: DDR(128M) -or- larger - * f000_0000-f3ff_ffff: PCI(256M) - * f400_0000-f7ff_ffff: RapidIO(128M) - * f800_0000-ffff_ffff: localbus(128M) - * f800_0000-fbff_ffff: LBC SDRAM(64M) - * fc00_0000-fdef_ffff: LBC BCSR,RTC,etc(31M) - * fdf0_0000-fdff_ffff: CCSRBAR(1M) - * fe00_0000-ffff_ffff: Flash(32M) - * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access - * Window. - * Note: If flash is 8M at default position(last 8M),no LAW needed. - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), -#ifndef CONFIG_RAM_AS_FLASH - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC), -#endif -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c deleted file mode 100644 index 054d644d951..00000000000 --- a/board/mpc8540eval/mpc8540eval.c +++ /dev/null @@ -1,230 +0,0 @@ -/* - * (C) Copyright 2002,2003, Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> -#include <spd_sdram.h> - -long int fixed_sdram (void); - -int board_pre_init (void) -{ -#if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); - - pci->peer &= 0xffffffdf; /* disable master abort */ -#endif - return 0; -} - -int checkboard (void) -{ - sys_info_t sysinfo; - - get_sys_info (&sysinfo); - - printf ("Board: Freescale MPC8540EVAL Board\n"); - printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor[0] / 1000000); - printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000); - printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000); - if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \ - || (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) { - printf ("\tLBC: %lu MHz\n", - sysinfo.freqSystemBus / 1000000/(CONFIG_SYS_LBC_LCRR & 0x0f)); - } else { - printf("\tLBC: unknown\n"); - } - printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); - return (0); -} - -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if !defined(CONFIG_RAM_AS_FLASH) - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - sys_info_t sysinfo; - uint temp_lbcdll = 0; -#endif -#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif - -#if defined(CONFIG_DDR_DLL) - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - return dram_size; -#endif - -#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */ - get_sys_info(&sysinfo); - /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ - if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV) < 66000000) { - lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; - } else { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; - udelay(200); - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; - asm("sync;isync;msync"); - } - set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ - set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; - asm("sync"); - * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; - asm("sync"); - * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; - asm("sync"); - * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; - asm("sync"); - * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; - asm("sync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; - asm("sync"); - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; - asm("sync"); -#endif - -#if defined(CONFIG_DDR_ECC) - { - /* Initialize all of memory for ECC, then - * enable errors */ - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); - - /* Enable errors for ECC */ - ddr->err_disable = 0x00000000; - asm("sync;isync;msync"); - } -#endif - - return dram_size; -} - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test passed.\n"); - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -long int fixed_sdram (void) -{ -#ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; -#if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - ddr->err_sbe = 0x00ff0000; -#endif - asm("sync;isync;msync"); - udelay(500); -#if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); -#else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; -#endif - asm("sync; isync; msync"); - udelay(500); -#endif - return (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024); -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -int board_eth_init(bd_t *bis) -{ - /* - * This board either has PCI NICs or uses the CPU's TSECs - * pci_eth_init() will return 0 if no NICs found, so in that case - * returning -1 will force cpu_eth_init() to be called. - */ - int num = pci_eth_init(bis); - return (num <= 0 ? -1 : num); -} diff --git a/board/mpc8540eval/tlb.c b/board/mpc8540eval/tlb.c deleted file mode 100644 index 06092f89bab..00000000000 --- a/board/mpc8540eval/tlb.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - #if defined(CONFIG_SYS_FLASH_PORT_WIDTH_16) - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_4M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x400000, CONFIG_SYS_FLASH_BASE + 0x400000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_4M, 1), - #else - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_16M, 1), - #endif - - #if !defined(CONFIG_SPD_EEPROM) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 4, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x4000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), - #endif - - SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, - #if defined(CONFIG_RAM_AS_FLASH) - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - #else - MAS3_SX|MAS3_SW|MAS3_SR, 0, - #endif - 0, 6, BOOKE_PAGESZ_64M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_16K, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_BCSR, CONFIG_SYS_BCSR, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_16K, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/pm854/Makefile b/board/pm854/Makefile deleted file mode 100644 index 9f623a29d2f..00000000000 --- a/board/pm854/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += law.o -COBJS-y += tlb.o -COBJS-$(CONFIG_FSL_DDR1) += ddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/pm854/ddr.c b/board/pm854/ddr.c deleted file mode 100644 index 7850794d64f..00000000000 --- a/board/pm854/ddr.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <i2c.h> - -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> - -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/pm854/law.c b/board/pm854/law.c deleted file mode 100644 index ac21d7a270e..00000000000 --- a/board/pm854/law.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff BCSR 1M - * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - /* This is not so much the SDRAM map as it is the whole localbus map. */ - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c deleted file mode 100644 index 0b8ea8192c9..00000000000 --- a/board/pm854/pm854.c +++ /dev/null @@ -1,298 +0,0 @@ - /* - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003, Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <pci.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> -#include <spd_sdram.h> - -#if defined(CONFIG_DDR_ECC) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram(void); - - -int board_early_init_f (void) -{ -#if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); - - pci->peer &= 0xffffffdf; /* disable master abort */ -#endif - - return 0; -} - -int checkboard (void) -{ - puts("Board: MicroSys PM854\n"); - -#ifdef CONFIG_PCI - printf("PCI1: 32 bit, %d MHz (compiled)\n", - CONFIG_SYS_CLK_FREQ / 1000000); -#else - printf("PCI1: disabled\n"); -#endif - - /* - * Initialize local bus. - */ - local_bus_init(); - - return 0; -} - - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int i,x; - - x = 10; - - /* - * Work around to stabilize DDR DLL - */ - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay (200); - while (gur->ddrdllcr != 0x81000100) - { - gur->devdisr = gur->devdisr | 0x00010000; - asm("sync;isync;msync"); - for (i=0; i<x; i++) - ; - gur->devdisr = gur->devdisr & 0xfff7ffff; - asm("sync;isync;msync"); - x++; - } - } -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - -#if defined(CONFIG_DDR_ECC) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - puts(" DDR: "); - return dram_size; -} - - -/* - * Initialize Local Bus - */ - -void -local_bus_init(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - uint clkdiv; - uint lbc_hz; - sys_info_t sysinfo; - - /* - * Errata LBC11. - * Fix Local Bus clock glitch when DLL is enabled. - * - * If localbus freq is < 66MHz, DLL bypass mode must be used. - * If localbus freq is > 133MHz, DLL can be safely enabled. - * Between 66 and 133, the DLL is enabled with an override workaround. - */ - - get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; - - if (lbc_hz < 66) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ - - } else if (lbc_hz >= 133) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ - - } else { - /* - * On REV1 boards, need to change CLKDIV before enable DLL. - * Default CLKDIV is 8, change it to 4 temporarily. - */ - uint pvr = get_pvr(); - uint temp_lbcdll = 0; - - if (pvr == PVR_85xx_REV1) { - /* FIXME: Justify the high bit here. */ - lbc->lcrr = 0x10000004; - } - - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ - udelay(200); - - /* - * Sample LBC DLL ctrl reg, upshift it to set the - * override bits. - */ - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); - asm("sync;isync;msync"); - } -} - - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test passed.\n"); - return 0; -} -#endif - - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -long int fixed_sdram (void) -{ - #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - #if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - ddr->err_sbe = 0x00ff0000; - #endif - asm("sync;isync;msync"); - udelay(500); - #if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); - #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - #endif - asm("sync; isync; msync"); - udelay(500); - #endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_pm854_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - } }, - { } -}; -#endif - - -static struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_pm854_config_table, -#endif -}; - -#endif /* CONFIG_PCI */ - - -void -pci_init_board(void) -{ -#ifdef CONFIG_PCI - pci_mpc85xx_init(&hose); -#endif /* CONFIG_PCI */ -} - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); /* Intialize TSECs first */ - return pci_eth_init(bis); -} diff --git a/board/pm854/tlb.c b/board/pm854/tlb.c deleted file mode 100644 index 5e74e2ded13..00000000000 --- a/board/pm854/tlb.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* - * TLB 0: 64M Non-cacheable, guarded - * 0xfc000000 64M FLASH (8,16,32 or 64 MB) - * Out of reset this entry is only 4K. - */ - SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_16M, 1), - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 6, BOOKE_PAGESZ_64M, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 7: 256M DDR - * 0x00000000 256M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_256M, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/pm856/Makefile b/board/pm856/Makefile deleted file mode 100644 index 9f623a29d2f..00000000000 --- a/board/pm856/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS-y += $(BOARD).o -COBJS-y += law.o -COBJS-y += tlb.o -COBJS-$(CONFIG_FSL_DDR1) += ddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/pm856/ddr.c b/board/pm856/ddr.c deleted file mode 100644 index 7850794d64f..00000000000 --- a/board/pm856/ddr.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <i2c.h> - -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> - -static void -get_spd(ddr1_spd_eeprom_t *spd, unsigned char i2c_address) -{ - i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr1_spd_eeprom_t)); -} - - -unsigned int -fsl_ddr_get_mem_data_rate(void) -{ - return get_ddr_freq(0); -} - - -void -fsl_ddr_get_spd(ddr1_spd_eeprom_t *ctrl_dimms_spd, - unsigned int ctrl_num) -{ - unsigned int i; - unsigned int i2c_address = 0; - - for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { - if (ctrl_num == 0 && i == 0) { - i2c_address = SPD_EEPROM_ADDRESS; - } - get_spd(&(ctrl_dimms_spd[i]), i2c_address); - } -} - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/pm856/law.c b/board/pm856/law.c deleted file mode 100644 index ac21d7a270e..00000000000 --- a/board/pm856/law.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* - * LAW(Local Access Window) configuration: - * - * 0x0000_0000 0x7fff_ffff DDR 2G - * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M - * 0xc000_0000 0xdfff_ffff RapidIO 512M - * 0xe000_0000 0xe000_ffff CCSR 1M - * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M - * 0xf000_0000 0xf7ff_ffff SDRAM 128M - * 0xf800_0000 0xf80f_ffff BCSR 1M - * 0xfc00_0000 0xffff_ffff FLASH (boot bank) 64M - * - * Notes: - * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window. - * If flash is 8M at default position (last 8M), no LAW needed. - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - /* This is not so much the SDRAM map as it is the whole localbus map. */ - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_RIO), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c deleted file mode 100644 index 4e059b08594..00000000000 --- a/board/pm856/pm856.c +++ /dev/null @@ -1,453 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2003,Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> -#include <ioports.h> -#include <spd_sdram.h> -#include <miiphy.h> -#include <netdev.h> - -#if defined(CONFIG_DDR_ECC) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -void local_bus_init(void); -long int fixed_sdram(void); - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ - /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ - /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ - /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ - /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ - /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ - /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ - /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ - /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ - /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ - /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ - /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ - /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ - /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ - /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ - /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* FREERUN */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ - /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ - /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ - /* PC15 */ { 0, 1, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 1, 0, 0, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 0, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* PD28 */ - /* PD27 */ { 1, 1, 0, 1, 0, 0 }, /* PD27 */ - /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* PD26 */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - - -int board_early_init_f (void) -{ - return 0; -} - -void reset_phy (void) -{ -} - - -int checkboard (void) -{ - puts("Board: MicroSys PM856\n"); - -#ifdef CONFIG_PCI - printf("PCI1: 32 bit, %d MHz (compiled)\n", - CONFIG_SYS_CLK_FREQ / 1000000); -#else - printf("PCI1: disabled\n"); -#endif - - /* - * Initialize local bus. - */ - local_bus_init(); - - return 0; -} - - -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int i,x; - - x = 10; - - /* - * Work around to stabilize DDR DLL - */ - gur->ddrdllcr = 0x81000000; - asm("sync;isync;msync"); - udelay (200); - while (gur->ddrdllcr != 0x81000100) - { - gur->devdisr = gur->devdisr | 0x00010000; - asm("sync;isync;msync"); - for (i=0; i<x; i++) - ; - gur->devdisr = gur->devdisr & 0xfff7ffff; - asm("sync;isync;msync"); - x++; - } - } -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - -#if defined(CONFIG_DDR_ECC) - /* - * Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - puts(" DDR: "); - return dram_size; -} - - -/* - * Initialize Local Bus - */ - -void -local_bus_init(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - - uint clkdiv; - uint lbc_hz; - sys_info_t sysinfo; - - /* - * Errata LBC11. - * Fix Local Bus clock glitch when DLL is enabled. - * - * If localbus freq is < 66MHz, DLL bypass mode must be used. - * If localbus freq is > 133MHz, DLL can be safely enabled. - * Between 66 and 133, the DLL is enabled with an override workaround. - */ - - get_sys_info(&sysinfo); - clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; - - if (lbc_hz < 66) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ - - } else if (lbc_hz >= 133) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ - - } else { - /* - * On REV1 boards, need to change CLKDIV before enable DLL. - * Default CLKDIV is 8, change it to 4 temporarily. - */ - uint pvr = get_pvr(); - uint temp_lbcdll = 0; - - if (pvr == PVR_85xx_REV1) { - /* FIXME: Justify the high bit here. */ - lbc->lcrr = 0x10000004; - } - - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */ - udelay(200); - - /* - * Sample LBC DLL ctrl reg, upshift it to set the - * override bits. - */ - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000); - asm("sync;isync;msync"); - } -} - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test passed.\n"); - return 0; -} -#endif - - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -long int fixed_sdram (void) -{ - #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - #if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - ddr->err_sbe = 0x00ff0000; - #endif - asm("sync;isync;msync"); - udelay(500); - #if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); - #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - #endif - asm("sync; isync; msync"); - udelay(500); - #endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found. - */ - -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc85xxads_config_table[] = { - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, { PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER - } }, - { } -}; -#endif - - -static struct pci_controller hose = { -#ifndef CONFIG_PCI_PNP - config_table: pci_mpc85xxads_config_table, -#endif -}; - -#endif /* CONFIG_PCI */ - - -void -pci_init_board(void) -{ -#ifdef CONFIG_PCI - pci_mpc85xx_init(&hose); -#endif /* CONFIG_PCI */ -} - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); /* Intialize TSECs first */ - return pci_eth_init(bis); -} diff --git a/board/pm856/tlb.c b/board/pm856/tlb.c deleted file mode 100644 index 5e74e2ded13..00000000000 --- a/board/pm856/tlb.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* - * TLB 0: 64M Non-cacheable, guarded - * 0xfc000000 64M FLASH (8,16,32 or 64 MB) - * Out of reset this entry is only 4K. - */ - SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_16M, 1), - - /* - * TLB 1: 256M Non-cacheable, guarded - * 0x80000000 256M PCI1 MEM First half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 2: 256M Non-cacheable, guarded - * 0x90000000 256M PCI1 MEM Second half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 3: 256M Non-cacheable, guarded - * 0xc0000000 256M Rapid IO MEM First half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 4: 256M Non-cacheable, guarded - * 0xd0000000 256M Rapid IO MEM Second half - */ - SET_TLB_ENTRY(1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, CONFIG_SYS_RIO_MEM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - /* - * TLB 5: 64M Non-cacheable, guarded - * 0xe000_0000 1M CCSRBAR - * 0xe200_0000 16M PCI1 IO - */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 6: 64M Cacheable, non-guarded - * 0xf000_0000 64M LBC SDRAM - */ - SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 6, BOOKE_PAGESZ_64M, 1), - -#if !defined(CONFIG_SPD_EEPROM) - /* - * TLB 7: 256M DDR - * 0x00000000 256M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_256M, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/sbc8548/law.c b/board/sbc8548/law.c index 6d1efc0c69e..5fa9db02f5a 100644 --- a/board/sbc8548/law.c +++ b/board/sbc8548/law.c @@ -50,14 +50,6 @@ struct law_entry law_table[] = { #ifndef CONFIG_SPD_EEPROM SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR), #endif -#ifdef CONFIG_SYS_PCI1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI), -#endif -#ifdef CONFIG_SYS_PCIE1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), -#endif /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 272428fbf80..e1a3ea36e95 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -32,6 +32,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <spd_sdram.h> #include <netdev.h> #include <tsec.h> @@ -42,8 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; void local_bus_init(void); -void sdram_init(void); -long int fixed_sdram (void); int board_early_init_f (void) { @@ -68,47 +67,6 @@ int checkboard (void) return 0; } -phys_size_t -initdram(int board_type) -{ - long dram_size = 0; - - puts("Initializing\n"); - -#if defined(CONFIG_DDR_DLL) - { - /* - * Work around to stabilize DDR DLL MSYNC_IN. - * Errata DDR9 seems to have been fixed. - * This is now the workaround for Errata DDR11: - * Override DLL = 1, Course Adj = 1, Tap Select = 0 - */ - - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - out_be32(&gur->ddrdllcr, 0x81000000); - asm("sync;isync;msync"); - udelay(200); - } -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - - /* - * SDRAM Initialization - */ - sdram_init(); - - puts(" DDR: "); - return dram_size; -} - /* * Initialize Local Bus */ @@ -146,8 +104,7 @@ local_bus_init(void) /* * Initialize SDRAM memory on the Local Bus. */ -void -sdram_init(void) +void lbc_sdram_init(void) { #if defined(CONFIG_SYS_LBC_SDRAM_SIZE) @@ -267,7 +224,7 @@ testdram(void) * fixed_sdram init -- doesn't use serial presence detect. * assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); @@ -309,33 +266,19 @@ long int fixed_sdram (void) static struct pci_controller pci1_hose; #endif /* CONFIG_PCI1 */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - - #ifdef CONFIG_PCI void pci_init_board(void) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info[2]; - u32 devdisr, pordevsr, porpllsr, io_sel; int first_free_busno = 0; - int num = 0; - -#ifdef CONFIG_PCIE1 - int pcie_configured; -#endif - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - porpllsr = in_be32(&gur->porpllsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug(" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); #ifdef CONFIG_PCI1 + struct fsl_pci_info pci_info; + u32 devdisr = in_be32(&gur->devdisr); + u32 pordevsr = in_be32(&gur->pordevsr); + u32 porpllsr = in_be32(&gur->porpllsr); + if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; @@ -349,8 +292,13 @@ pci_init_board(void) pci_clk_sel ? "sync" : "async", pci_arb ? "arbiter" : "external-arbiter"); - SET_STD_PCI_INFO(pci_info[num], 1); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI: disabled\n"); @@ -363,22 +311,7 @@ pci_init_board(void) setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */ -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){ - SET_STD_PCIE_INFO(pci_info[num], 1); - printf("PCIE: base address %lx\n", pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */ -#endif + fsl_pcie_init_board(first_free_busno); } #endif diff --git a/board/sbc8548/tlb.c b/board/sbc8548/tlb.c index 38bdeb37c30..bb4c05210cc 100644 --- a/board/sbc8548/tlb.c +++ b/board/sbc8548/tlb.c @@ -65,44 +65,34 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 1, BOOKE_PAGESZ_1G, 1), /* - * TLB 2: 256M Cacheable, non-guarded - * 0x0 256M DDR SDRAM - */ -#if !defined(CONFIG_SPD_EEPROM) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 2, BOOKE_PAGESZ_256M, 1), -#endif - - /* - * TLB 3: 64M Non-cacheable, guarded + * TLB 2: 64M Non-cacheable, guarded * 0xe0000000 1M CCSRBAR * 0xe2000000 8M PCI1 IO * 0xe2800000 8M PCIe IO */ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_64M, 1), + 0, 2, BOOKE_PAGESZ_64M, 1), /* - * TLB 4: 64M Cacheable, non-guarded + * TLB 3: 64M Cacheable, non-guarded * 0xf0000000 64M LBC SDRAM First half */ SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 4, BOOKE_PAGESZ_64M, 1), + 0, 3, BOOKE_PAGESZ_64M, 1), /* - * TLB 5: 64M Cacheable, non-guarded + * TLB 4: 64M Cacheable, non-guarded * 0xf4000000 64M LBC SDRAM Second half */ SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000, MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), + 0, 4, BOOKE_PAGESZ_64M, 1), /* - * TLB 6: 16M Cacheable, non-guarded + * TLB 5: 16M Cacheable, non-guarded * 0xf8000000 1M 7-segment LED display * 0xf8100000 1M User switches * 0xf8300000 1M Board revision @@ -110,24 +100,24 @@ struct fsl_e_tlb_entry tlb_table[] = { */ SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_16M, 1), + 0, 5, BOOKE_PAGESZ_16M, 1), /* - * TLB 7: 4M Non-cacheable, guarded + * TLB 6: 4M Non-cacheable, guarded * 0xfb800000 4M 1st 4MB block of 64MB user FLASH */ SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_4M, 1), + 0, 6, BOOKE_PAGESZ_4M, 1), /* - * TLB 8: 4M Non-cacheable, guarded + * TLB 7: 4M Non-cacheable, guarded * 0xfbc00000 4M 2nd 4MB block of 64MB user FLASH */ SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000, CONFIG_SYS_ALT_FLASH + 0x400000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_4M, 1), + 0, 7, BOOKE_PAGESZ_4M, 1), }; diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 7bf81799e51..c5fe92e0615 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -38,8 +38,6 @@ #include <libfdt.h> #include <fdt_support.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -263,95 +261,6 @@ int checkboard (void) } -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if 0 -#if !defined(CONFIG_RAM_AS_FLASH) - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - sys_info_t sysinfo; - uint temp_lbcdll = 0; -#endif -#endif /* 0 */ -#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif -#if defined(CONFIG_DDR_DLL) - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); -#endif - -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = fixed_sdram (); -#endif - -#if 0 -#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */ - get_sys_info(&sysinfo); - /* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */ - if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) { - lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000; - } else { -#if defined(CONFIG_MPC85xx_REV1) /* need change CLKDIV before enable DLL */ - lbc->lcrr = 0x10000004; /* default CLKDIV is 8, change it to 4 temporarily */ -#endif - lbc->lcrr = CONFIG_SYS_LBC_LCRR & 0x7fffffff; - udelay(200); - temp_lbcdll = gur->lbcdllcr; - gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000; - asm("sync;isync;msync"); - } - set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); /* 64MB SDRAM */ - set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_3; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; - asm("sync"); - (unsigned int) * (ulong *)0 = 0x000000ff; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; - asm("sync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; - asm("sync"); - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; - asm("sync"); -#endif -#endif - -#if defined(CONFIG_DDR_ECC) - { - /* Initialize all of memory for ECC, then - * enable errors */ - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - - dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); - - /* Enable errors for ECC */ - ddr->err_disable = 0x00000000; - asm("sync;isync;msync"); - } -#endif - - return dram_size; -} - - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { @@ -390,7 +299,7 @@ int testdram (void) /************************************************************************* * fixed sdram init -- doesn't use serial presence detect. ************************************************************************/ -long int fixed_sdram (void) +phys_size_t fixed_sdram(void) { #define CONFIG_SYS_DDR_CONTROL 0xc2000000 diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c index 705e1c2964f..14259d6a10e 100644 --- a/board/sbc8641d/law.c +++ b/board/sbc8641d/law.c @@ -49,13 +49,8 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, LAW_SIZE_256M, LAW_TRGT_IF_DDR_2), #endif - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI_2), SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI_2), SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_RIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c index 5bf2364ee2d..5c30b2676e4 100644 --- a/board/sbc8641d/sbc8641d.c +++ b/board/sbc8641d/sbc8641d.c @@ -35,6 +35,7 @@ #include <asm/immap_86xx.h> #include <asm/fsl_pci.h> #include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> #include <libfdt.h> #include <fdt_support.h> @@ -180,72 +181,11 @@ long int fixed_sdram (void) * Initialize PCI Devices, report devices found. */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_fsl86xxads_config_table[] = { - {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_IDSEL_NUMBER, PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}}, - {} -}; -#endif - -static struct pci_controller pcie1_hose = { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc86xxcts_config_table -#endif -}; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif /* CONFIG_PCIE2 */ - -int first_free_busno = 0; - void pci_init_board(void) { - struct fsl_pci_info pci_info[2]; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR; - volatile ccsr_gur_t *gur = &immap->im_gur; - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL) - >> MPC8641_PORDEVSR_IO_SEL_SHIFT; - int pcie_ep; - int num = 0; - -#ifdef CONFIG_PCIE1 - int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - puts("PCIE1: disabled\n"); - } -#else - puts("PCIE1: disabled\n"); -#endif /* CONFIG_PCIE1 */ - -#ifdef CONFIG_PCIE2 - - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected as %s (base addr %lx)\n", - pcie_ep ? "Endpoint" : "Root Complex", - pci_info[num].regs); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); -#else - puts("PCIE2: disabled\n"); -#endif /* CONFIG_PCIE2 */ + fsl_pcie_init_board(0); } +#endif /* CONFIG_PCI */ #if defined(CONFIG_OF_BOARD_SETUP) diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index 029ba029810..c8235f4a9b4 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -39,7 +39,7 @@ * so this should be extended for other future boards * using this routine! */ -long int sdram_setup(int casl) +phys_size_t fixed_sdram(void) { volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); @@ -77,19 +77,6 @@ long int sdram_setup(int casl) } #endif -phys_size_t initdram (int board_type) -{ - long dram_size = 0; -#if defined(CONFIG_SPD_EEPROM) - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#else - dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL); -#endif - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/stx/stxgp3/stxgp3.c b/board/stx/stxgp3/stxgp3.c index 1ed340efe7c..de22bf5e0af 100644 --- a/board/stx/stxgp3/stxgp3.c +++ b/board/stx/stxgp3/stxgp3.c @@ -40,8 +40,6 @@ #include <spd_sdram.h> #include <miiphy.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -277,36 +275,6 @@ show_activity(int flag) next_led_update += (get_tbclk() / 4); } -phys_size_t -initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) - /* Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) diff --git a/board/stx/stxssa/stxssa.c b/board/stx/stxssa/stxssa.c index 6cd28a34b9f..83ffcd2b924 100644 --- a/board/stx/stxssa/stxssa.c +++ b/board/stx/stxssa/stxssa.c @@ -41,8 +41,6 @@ #include <miiphy.h> #include <netdev.h> -long int fixed_sdram (void); - /* * I/O Port configuration table * @@ -294,37 +292,6 @@ show_activity(int flag) next_led_update += (get_tbclk() / 4); } -phys_size_t -initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - uint temp_ddrdll = 0; - - /* Work around to stabilize DDR DLL */ - temp_ddrdll = gur->ddrdllcr; - gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000; - asm("sync;isync;msync"); - } -#endif - - dram_size = fsl_ddr_sdram(); - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - -#if defined(CONFIG_DDR_ECC) - /* Initialize and enable DDR ECC. - */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} - - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/tqc/tqm85xx/law.c b/board/tqc/tqm85xx/law.c index e684ba2c2a4..c596303c5db 100644 --- a/board/tqc/tqm85xx/law.c +++ b/board/tqc/tqm85xx/law.c @@ -67,20 +67,13 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_2G, LAW_TRGT_IF_DDR), - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_3_SIZE, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_PCI), -#ifdef CONFIG_PCIE1 - SET_LAW(CONFIG_SYS_PCIE1_MEM_BUS, LAW_5_SIZE, LAW_TRGT_IF_PCIE_1), -#else /* !CONFIG_PCIE1 */ +#ifndef CONFIG_PCIE1 SET_LAW(CONFIG_SYS_RIO_MEM_BASE, LAW_5_SIZE, LAW_TRGT_IF_RIO), #endif /* CONFIG_PCIE1 */ #if defined(CONFIG_CAN_DRIVER) || defined(CONFIG_NAND) SET_LAW(CONFIG_SYS_CAN_BASE, LAW_SIZE_16M, LAW_TRGT_IF_LBC), #endif /* CONFIG_CAN_DRIVER || CONFIG_NAND */ -#ifdef CONFIG_PCIE1 - SET_LAW(CONFIG_SYS_PCIE1_IO_BUS, LAW_SIZE_16M, LAW_TRGT_IF_PCIE_1), -#endif /* CONFIG_PCIE */ }; int num_law_entries = ARRAY_SIZE (law_table); diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c index 503c5e5306d..b2d31853516 100644 --- a/board/tqc/tqm85xx/sdram.c +++ b/board/tqc/tqm85xx/sdram.c @@ -65,6 +65,7 @@ sdram_conf_t ddr_cs_conf[] = { #define N_DDR_CS_CONF (sizeof(ddr_cs_conf) / sizeof(ddr_cs_conf[0])) int cas_latency (void); +static phys_size_t sdram_setup(int); /* * Autodetect onboard DDR SDRAM on 85xx platforms @@ -73,7 +74,26 @@ int cas_latency (void); * so this should be extended for other future boards * using this routine! */ -long int sdram_setup (int casl) +phys_size_t fixed_sdram(void) +{ + int casl = 0; + phys_size_t dram_size = 0; + + casl = cas_latency(); + dram_size = sdram_setup(casl); + if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) { + /* + * Try again with default CAS latency + */ + printf("Problem with CAS lantency, using default CL %d/10!\n", + CONFIG_DDR_DEFAULT_CL); + dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL); + puts(" "); + } + return dram_size; +} + +static phys_size_t sdram_setup(int casl) { int i; volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); @@ -374,54 +394,6 @@ long int sdram_setup (int casl) return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0; } -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - int casl; - -#if defined(CONFIG_DDR_DLL) - /* - * This DLL-Override only used on TQM8540 and TQM8560 - */ - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int i, x; - - x = 10; - - /* - * Work around to stabilize DDR DLL - */ - gur->ddrdllcr = 0x81000000; - asm ("sync; isync; msync"); - udelay (200); - while (gur->ddrdllcr != 0x81000100) { - gur->devdisr = gur->devdisr | 0x00010000; - asm ("sync; isync; msync"); - for (i = 0; i < x; i++) - ; - gur->devdisr = gur->devdisr & 0xfff7ffff; - asm ("sync; isync; msync"); - x++; - } - } -#endif - - casl = cas_latency (); - dram_size = sdram_setup (casl); - if ((dram_size == 0) && (casl != CONFIG_DDR_DEFAULT_CL)) { - /* - * Try again with default CAS latency - */ - printf ("Problem with CAS lantency, using default CL %d/10!\n", - CONFIG_DDR_DEFAULT_CL); - dram_size = sdram_setup (CONFIG_DDR_DEFAULT_CL); - puts (" "); - } - - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index 75dd348aa52..f9f8cc9a01e 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 6, BOOKE_PAGESZ_64M, 1), - -#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE) - /* - * TLB 7+8: 2G DDR, cache enabled - * 0x00000000 2G DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1G, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1), -#else - /* - * TLB 7+8: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), -#endif #ifdef CONFIG_PCIE1 /* * TLB 9: 16M Non-cacheable, guarded @@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 7, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 8+9: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 9, BOOKE_PAGESZ_256M, 1), - #ifdef CONFIG_PCIE1 /* * TLB 10: 16M Non-cacheable, guarded diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 527af6dd2ee..99b13311cef 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -38,6 +38,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_pci.h> #include <asm/io.h> +#include <asm/fsl_serdes.h> #include <linux/compiler.h> #include <ioports.h> #include <flash.h> @@ -540,33 +541,29 @@ void local_bus_init (void) static struct pci_controller pci1_hose; #endif /* CONFIG_PCI1 */ -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif /* CONFIG_PCIE1 */ - void pci_init_board (void) { - struct fsl_pci_info pci_info[2]; + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int first_free_busno = 0; - int num = 0; +#ifdef CONFIG_PCI1 + struct fsl_pci_info pci_info; int pcie_ep; - __maybe_unused int pcie_configured; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u32 devdisr = in_be32(&gur->devdisr); - u32 pordevsr = in_be32(&gur->pordevsr); - __maybe_unused uint io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> - MPC85xx_PORDEVSR_IO_SEL_SHIFT; -#ifdef CONFIG_PCI1 uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32; uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB; uint pci_speed = CONFIG_SYS_CLK_FREQ; /* PCI PSPEED in [4:5] */ uint pci_clk_sel = in_be32(&gur->porpllsr) & MPC85xx_PORDEVSR_PCI1_SPD; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI1: %d bit, %s MHz, %s, %s, %s\n", (pci_32) ? 32 : 64, (pci_speed == 33333333) ? "33" : @@ -574,7 +571,7 @@ void pci_init_board (void) pci_clk_sel ? "sync" : "async", pcie_ep ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); #ifdef CONFIG_PCIX_CHECK if (!(in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1)) { @@ -597,22 +594,7 @@ void pci_init_board (void) setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); #endif -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected as %s\n", - pcie_ep ? "Endpoint" : "Root Complex"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); -#endif /* CONFIG_PCIE1 */ + fsl_pcie_init_board(first_free_busno); } #ifdef CONFIG_OF_BOARD_SETUP diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index 7604f626bbc..39d105fcdd0 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -33,8 +33,6 @@ COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o -COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o -COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o diff --git a/board/xes/common/fsl_8xxx_ddr.c b/board/xes/common/fsl_8xxx_ddr.c deleted file mode 100644 index 81ee70d5a14..00000000000 --- a/board/xes/common/fsl_8xxx_ddr.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright 2008 Extreme Engineering Solutions, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/mmu.h> - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void ddr_enable_ecc(unsigned int dram_size); -#endif - -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size = fsl_ddr_sdram(); - -#ifdef CONFIG_MPC85xx - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; -#endif - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - /* Initialize and enable DDR ECC */ - ddr_enable_ecc(dram_size); -#endif - - return dram_size; -} diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index 4a0965bf08d..28c83c7ca43 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -24,6 +24,7 @@ #include <common.h> #include <pci.h> #include <asm/fsl_pci.h> +#include <asm/fsl_serdes.h> #include <asm/io.h> #include <linux/compiler.h> #include <libfdt.h> @@ -33,59 +34,16 @@ #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; #endif -#ifdef CONFIG_PCIE1 -static struct pci_controller pcie1_hose; -#endif -#ifdef CONFIG_PCIE2 -static struct pci_controller pcie2_hose; -#endif -#ifdef CONFIG_PCIE3 -static struct pci_controller pcie3_hose; -#endif - -/* - * 85xx and 86xx share naming conventions, but different layout. - * Correlate names to CPU-specific values to share common - * PCI code. - */ -#if defined(CONFIG_MPC85xx) -#define MPC8xxx_DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE -#define MPC8xxx_DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2 -#define MPC8xxx_DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3 -#define MPC8xxx_PORDEVSR_IO_SEL MPC85xx_PORDEVSR_IO_SEL -#define MPC8xxx_PORDEVSR_IO_SEL_SHIFT MPC85xx_PORDEVSR_IO_SEL_SHIFT -#define MPC8xxx_PORBMSR_HA MPC85xx_PORBMSR_HA -#define MPC8xxx_PORBMSR_HA_SHIFT MPC85xx_PORBMSR_HA_SHIFT -#elif defined(CONFIG_MPC86xx) -#define MPC8xxx_DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIEX1 -#define MPC8xxx_DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIEX2 -#define MPC8xxx_DEVDISR_PCIE3 0 /* 8641 doesn't have PCIe3 */ -#define MPC8xxx_PORDEVSR_IO_SEL MPC8641_PORDEVSR_IO_SEL -#define MPC8xxx_PORDEVSR_IO_SEL_SHIFT MPC8641_PORDEVSR_IO_SEL_SHIFT -#define MPC8xxx_PORBMSR_HA MPC8641_PORBMSR_HA -#define MPC8xxx_PORBMSR_HA_SHIFT MPC8641_PORBMSR_HA_SHIFT -#endif void pci_init_board(void) { - struct fsl_pci_info pci_info[3]; int first_free_busno = 0; - int num = 0; - int pcie_ep; - __maybe_unused int pcie_configured; -#if defined(CONFIG_MPC85xx) +#ifdef CONFIG_PCI1 + int pcie_ep; + struct fsl_pci_info pci_info; volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#elif defined(CONFIG_MPC86xx) - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile ccsr_gur_t *gur = &immap->im_gur; -#endif u32 devdisr = in_be32(&gur->devdisr); - u32 pordevsr = in_be32(&gur->pordevsr); - __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >> - MPC8xxx_PORDEVSR_IO_SEL_SHIFT; - -#ifdef CONFIG_PCI1 uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD; uint pci_32 = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_PCI32; uint pci_arb = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_ARB; @@ -93,8 +51,13 @@ void pci_init_board(void) uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000; if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); + SET_STD_PCI_INFO(pci_info, 1); + set_next_law(pci_info.mem_phys, + law_size_bits(pci_info.mem_size), pci_info.law); + set_next_law(pci_info.io_phys, + law_size_bits(pci_info.io_size), pci_info.law); + + pcie_ep = fsl_setup_hose(&pci1_hose, pci_info.regs); printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n", pci_32 ? 32 : 64, pcix ? "PCIX" : "PCI", @@ -103,66 +66,18 @@ void pci_init_board(void) pcie_ep ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], + first_free_busno = fsl_pci_init_port(&pci_info, &pci1_hose, first_free_busno); } else { printf("PCI1: disabled\n"); } #elif defined CONFIG_MPC8548 + volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); /* PCI1 not present on MPC8572 */ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); #endif -#ifdef CONFIG_PCIE1 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); - - if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { - SET_STD_PCIE_INFO(pci_info[num], 1); - pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); - printf("PCIE1: connected as %s\n", - pcie_ep ? "Endpoint" : "Root Complex"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); - } else { - printf("PCIE1: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1); -#endif /* CONFIG_PCIE1 */ - -#ifdef CONFIG_PCIE2 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); - - if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { - SET_STD_PCIE_INFO(pci_info[num], 2); - pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); - printf("PCIE2: connected as %s\n", - pcie_ep ? "Endpoint" : "Root Complex"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); - } else { - printf("PCIE2: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2); -#endif /* CONFIG_PCIE2 */ - -#ifdef CONFIG_PCIE3 - pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); - - if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { - SET_STD_PCIE_INFO(pci_info[num], 3); - pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); - printf("PCIE3: connected as %s\n", - pcie_ep ? "Endpoint" : "Root Complex"); - first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); - } else { - printf("PCIE3: disabled\n"); - } -#else - setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3); -#endif /* CONFIG_PCIE3 */ + fsl_pcie_init_board(first_free_busno); } #if defined(CONFIG_OF_BOARD_SETUP) diff --git a/board/xes/xpedite517x/law.c b/board/xes/xpedite517x/law.c index 0b7d9ef8d18..df23df1bab1 100644 --- a/board/xes/xpedite517x/law.c +++ b/board/xes/xpedite517x/law.c @@ -39,14 +39,6 @@ struct law_entry law_table[] = { /* NAND LAW covers 2 NAND flashes */ SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_512K, LAW_TRGT_IF_LBC), #endif -#ifdef CONFIG_SYS_PCIE1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), -#endif -#ifdef CONFIG_SYS_PCIE2_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite517x/xpedite517x.c b/board/xes/xpedite517x/xpedite517x.c index 0f7fa6c43ab..572a9080047 100644 --- a/board/xes/xpedite517x/xpedite517x.c +++ b/board/xes/xpedite517x/xpedite517x.c @@ -22,6 +22,7 @@ #include <common.h> #include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> #include <asm/mmu.h> #include <asm/io.h> #include <fdt_support.h> @@ -71,6 +72,18 @@ int board_early_init_r(void) return 0; } +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size = fsl_ddr_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* Initialize and enable DDR ECC */ + ddr_enable_ecc(dram_size); +#endif + + return dram_size; +} + #if defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/xes/xpedite520x/law.c b/board/xes/xpedite520x/law.c index bbfcb9da83c..5c1fcd2b171 100644 --- a/board/xes/xpedite520x/law.c +++ b/board/xes/xpedite520x/law.c @@ -38,14 +38,6 @@ struct law_entry law_table[] = { /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */ SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -#if CONFIG_SYS_PCI1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCI1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCI_1), - SET_LAW(CONFIG_SYS_PCI1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_1), -#endif -#if CONFIG_SYS_PCI2_MEM_PHYS - SET_LAW(CONFIG_SYS_PCI2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI_2), - SET_LAW(CONFIG_SYS_PCI2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCI_2), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite537x/law.c b/board/xes/xpedite537x/law.c index daee676c426..54c28dad39a 100644 --- a/board/xes/xpedite537x/law.c +++ b/board/xes/xpedite537x/law.c @@ -37,18 +37,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_PCIE1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), -#endif -#ifdef CONFIG_SYS_PCIE2_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), -#endif -#ifdef CONFIG_SYS_PCIE3_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite550x/law.c b/board/xes/xpedite550x/law.c index 4d4445d3108..66f1cf9cd02 100644 --- a/board/xes/xpedite550x/law.c +++ b/board/xes/xpedite550x/law.c @@ -37,18 +37,6 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_PCIE1_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), - SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), -#endif -#ifdef CONFIG_SYS_PCIE2_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), - SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), -#endif -#ifdef CONFIG_SYS_PCIE3_MEM_PHYS - SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_3), - SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_3), -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/boards.cfg b/boards.cfg index 0574bb2044d..3497408f38c 100644 --- a/boards.cfg +++ b/boards.cfg @@ -441,14 +441,6 @@ MVBLM7 powerpc mpc83xx mvblm7 matrix_ SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP TQM834x powerpc mpc83xx tqm834x tqc -ATUM8548 powerpc mpc85xx atum8548 -MPC8540EVAL powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M -MPC8540EVAL_33 powerpc mpc85xx mpc8540eval - - MPC8540EVAL -MPC8540EVAL_33_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:PCI_SLAVE -MPC8540EVAL_66 powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M -MPC8540EVAL_66_slave powerpc mpc85xx mpc8540eval - - MPC8540EVAL:SYSCLK_66M,PCI_SLAVE -PM854 powerpc mpc85xx pm854 -PM856 powerpc mpc85xx pm856 sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 @@ -481,6 +473,7 @@ MPC8569MDS_ATM powerpc mpc85xx mpc8569mds freesca MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freescale - MPC8569MDS:NAND MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT +MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND P1011RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011 P1011RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,NAND P1011RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1011,SDCARD diff --git a/doc/README.atum8548 b/doc/README.atum8548 deleted file mode 100644 index 4eb56bae2fc..00000000000 --- a/doc/README.atum8548 +++ /dev/null @@ -1,29 +0,0 @@ -Building U-Boot ---------------- - -The ATUM8548 code is known to build using ELDK 4.1. - -$ make ATUM8548_config -Configuring for ATUM8548 board... -$ make - -Using Flash ------------ - -The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000). - -The BDI2000 commands for copying u-boot into flash are -as follows: - - erase 0xFFF80000 0x4000 0x20 - prog 0xfff80000 uboot.bin bin - -Booting Linux -------------- - -U-boot/kermit commands for booting linux via NFS - assumming the proper -bootargs are set - are as follows: - - tftp 1000000 uImage.atum - tftp c00000 mpc8548atum.dtb - bootm 1000000 - c00000 diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index 046f981cf0d..d059a979817 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -144,8 +144,8 @@ Updated 13-July-2004 Jon Loeliger also manual config the DDR after undef this definition. CONFIG_DDR_ECC only for ECC DDR module - CONFIG_DDR_DLL DLL fix on some ADS boards needed for more - stability. + CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN DLL fix on some ADS boards needed + for more stability. CONFIG_HAS_FEC If an FEC is on chip, set to 1, else 0. Other than the above definitions, the rest in the config files are diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 40b136c1764..d01c926c455 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -1,5 +1,5 @@ /* - * Copyright 2007,2010 Freescale Semiconductor, Inc + * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc * Andy Fleming * * Based vaguely on the pxa mmc code: @@ -79,6 +79,9 @@ uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) if (data->blocks > 1) { xfertyp |= XFERTYP_MSBSEL; xfertyp |= XFERTYP_BCEN; +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111 + xfertyp |= XFERTYP_AC12EN; +#endif } if (data->flags & MMC_DATA_READ) @@ -234,6 +237,11 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111 + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + return 0; +#endif + esdhc_write32(®s->irqstat, -1); sync(); @@ -464,6 +472,11 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) voltage_caps = 0; caps = regs->hostcapblt; + +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135 + caps = caps & ~(ESDHC_HOSTCAPBLT_SRS | + ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30); +#endif if (caps & ESDHC_HOSTCAPBLT_VS18) voltage_caps |= MMC_VDD_165_195; if (caps & ESDHC_HOSTCAPBLT_VS30) @@ -508,17 +521,19 @@ int fsl_esdhc_mmc_init(bd_t *bis) void fdt_fixup_esdhc(void *blob, bd_t *bd) { const char *compat = "fsl,esdhc"; - const char *status = "okay"; +#ifdef CONFIG_FSL_ESDHC_PIN_MUX if (!hwconfig("esdhc")) { - status = "disabled"; - goto out; + do_fixup_by_compat(blob, compat, "status", "disabled", + 8 + 1, 1); + return; } +#endif do_fixup_by_compat_u32(blob, compat, "clock-frequency", gd->sdhc_clk, 1); -out: - do_fixup_by_compat(blob, compat, "status", status, - strlen(status) + 1, 1); + + do_fixup_by_compat(blob, compat, "status", "okay", + 4 + 1, 1); } #endif diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 5b34dcbb0fe..6c168c141ca 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -18,6 +18,8 @@ */ #include <common.h> +#include <malloc.h> +#include <asm/fsl_serdes.h> DECLARE_GLOBAL_DATA_PTR; @@ -215,8 +217,10 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } -void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) +void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) { + u32 cfg_addr = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_addr; + u32 cfg_data = (u32)&((ccsr_fsl_pci_t *)pci_info->regs)->cfg_data; u16 temp16; u32 temp32; int enabled, r, inbound = 0; @@ -233,10 +237,6 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) u64 out_hi = 0, out_lo = -1ULL; u32 pcicsrbar, pcicsrbar_sz; -#ifdef DEBUG - int neg_link_w; -#endif - pci_setup_indirect(hose, cfg_addr, cfg_data); /* Handle setup of outbound windows first */ @@ -352,20 +352,20 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data) #endif if (!enabled) { - debug("....PCIE link error. Skipping scan." - "LTSSM=0x%02x\n", ltssm); + /* Let the user know there's no PCIe link */ + printf("no link, regs @ 0x%lx\n", pci_info->regs); hose->last_busno = hose->first_busno; return; } out_be32(&pci->pme_msg_det, 0xffffffff); out_be32(&pci->pme_msg_int_en, 0xffffffff); -#ifdef DEBUG + + /* Print the negotiated PCIe link width */ pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16); - neg_link_w = (temp16 & 0x3f0 ) >> 4; - printf("...PCIE LTSSM=0x%x, Negotiated link width=%d\n", - ltssm, neg_link_w); -#endif + printf("x%d, regs @ 0x%lx\n", (temp16 & 0x3f0 ) >> 4, + pci_info->regs); + hose->current_busno++; /* Start scan with secondary */ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno); } @@ -474,7 +474,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, hose->region_count = r - hose->regions; hose->first_busno = busno; - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); + fsl_pci_init(hose, pci_info); if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); @@ -483,7 +483,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ? - "E" : "", pci_info->pci_num, + "e" : "", pci_info->pci_num, hose->first_busno, hose->last_busno); return(hose->last_busno + 1); @@ -513,16 +513,169 @@ void fsl_pci_config_unlock(struct pci_controller *hose) } } +#if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || \ + defined(CONFIG_PCIE3) || defined(CONFIG_PCIE4) +int fsl_configure_pcie(struct fsl_pci_info *info, + struct pci_controller *hose, + const char *connected, int busno) +{ + int is_endpoint; + + set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law); + set_next_law(info->io_phys, law_size_bits(info->io_size), info->law); + + is_endpoint = fsl_setup_hose(hose, info->regs); + printf("PCIe%u: %s", info->pci_num, + is_endpoint ? "Endpoint" : "Root Complex"); + if (connected) + printf(" of %s", connected); + puts(", "); + + return fsl_pci_init_port(info, hose, busno); +} + +#if defined(CONFIG_FSL_CORENET) + #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 + #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 + #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 + #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR +#elif defined(CONFIG_MPC85xx) + #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE + #define _DEVDISR_PCIE2 MPC85xx_DEVDISR_PCIE2 + #define _DEVDISR_PCIE3 MPC85xx_DEVDISR_PCIE3 + #define _DEVDISR_PCIE4 0 + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR +#elif defined(CONFIG_MPC86xx) + #define _DEVDISR_PCIE1 MPC86xx_DEVDISR_PCIE1 + #define _DEVDISR_PCIE2 MPC86xx_DEVDISR_PCIE2 + #define _DEVDISR_PCIE3 0 + #define _DEVDISR_PCIE4 0 + #define CONFIG_SYS_MPC8xxx_GUTS_ADDR \ + (&((immap_t *)CONFIG_SYS_IMMR)->im_gur) +#else +#error "No defines for DEVDISR_PCIE" +#endif + +/* Implement a dummy function for those platforms w/o SERDES */ +static const char *__board_serdes_name(enum srds_prtcl device) +{ + switch (device) { +#ifdef CONFIG_SYS_PCIE1_NAME + case PCIE1: + return CONFIG_SYS_PCIE1_NAME; +#endif +#ifdef CONFIG_SYS_PCIE2_NAME + case PCIE2: + return CONFIG_SYS_PCIE2_NAME; +#endif +#ifdef CONFIG_SYS_PCIE3_NAME + case PCIE3: + return CONFIG_SYS_PCIE3_NAME; +#endif +#ifdef CONFIG_SYS_PCIE4_NAME + case PCIE4: + return CONFIG_SYS_PCIE4_NAME; +#endif + default: + return NULL; + } + + return NULL; +} + +__attribute__((weak, alias("__board_serdes_name"))) const char * +board_serdes_name(enum srds_prtcl device); + +static u32 devdisr_mask[] = { + _DEVDISR_PCIE1, + _DEVDISR_PCIE2, + _DEVDISR_PCIE3, + _DEVDISR_PCIE4, +}; + +int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, + struct fsl_pci_info *pci_info) +{ + struct pci_controller *hose; + int num = dev - PCIE1; + + hose = calloc(1, sizeof(struct pci_controller)); + if (!hose) + return busno; + + if (is_serdes_configured(dev) && !(devdisr & devdisr_mask[num])) { + busno = fsl_configure_pcie(pci_info, hose, + board_serdes_name(dev), busno); + } else { + printf("PCIe%d: disabled\n", num + 1); + } + + return busno; +} + +int fsl_pcie_init_board(int busno) +{ + struct fsl_pci_info pci_info; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; + u32 devdisr = in_be32(&gur->devdisr); + +#ifdef CONFIG_PCIE1 + SET_STD_PCIE_INFO(pci_info, 1); + busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ +#endif + +#ifdef CONFIG_PCIE2 + SET_STD_PCIE_INFO(pci_info, 2); + busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ +#endif + +#ifdef CONFIG_PCIE3 + SET_STD_PCIE_INFO(pci_info, 3); + busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */ +#endif + +#ifdef CONFIG_PCIE4 + SET_STD_PCIE_INFO(pci_info, 4); + busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); +#else + setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */ +#endif + + return busno; +} +#else +int fsl_pcie_init_ctrl(int busno, u32 devdisr, enum srds_prtcl dev, + struct fsl_pci_info *pci_info) +{ + return busno; +} + +int fsl_pcie_init_board(int busno) +{ + return busno; +} +#endif + #ifdef CONFIG_OF_BOARD_SETUP #include <libfdt.h> #include <fdt_support.h> void ft_fsl_pci_setup(void *blob, const char *pci_compat, - struct pci_controller *hose, unsigned long ctrl_addr) + unsigned long ctrl_addr) { int off; u32 bus_range[2]; phys_addr_t p_ctrl_addr = (phys_addr_t)ctrl_addr; + struct pci_controller *hose; + + hose = find_hose_by_cfg_addr((void *)(ctrl_addr)); /* convert ctrl_addr to true physical address */ p_ctrl_addr = (phys_addr_t)ctrl_addr - CONFIG_SYS_CCSRBAR; diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 702ac678260..cdfc4fb01af 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -165,6 +165,18 @@ struct pci_controller *pci_bus_to_hose (int bus) return NULL; } +struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr) +{ + struct pci_controller *hose; + + for (hose = hose_head; hose; hose = hose->next) { + if (hose->cfg_addr == cfg_addr) + return hose; + } + + return NULL; +} + int pci_last_busno(void) { struct pci_controller *hose = hose_head; diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h deleted file mode 100644 index 78757ecced2..00000000000 --- a/include/configs/ATUM8548.h +++ /dev/null @@ -1,443 +0,0 @@ -/* - * Copyright 2007 - * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com - * - * Copyright 2004, 2007 Freescale Semiconductor. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * atum8548 board configuration file - * - * Please refer to doc/README.atum8548 for more info. - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* Debug Options, Disable in production -#define ET_DEBUG 1 -#define CONFIG_PANIC_HANG 1 -#define DEBUG 1 -*/ - -/* CPLD Configuration Options */ -#define MPC85xx_ATUM_CLKOCR 0x80000002 - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ -#define CONFIG_MPC8548 1 /* MPC8548 specific */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfff80000 -#endif - -#define CONFIG_PCI 1 /* enable any pci type devices */ -#define CONFIG_PCI1 1 /* PCI controller 1 */ -#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCI2 1 /* PCI controller 2 */ -#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ - -#define CONFIG_TSEC_ENET 1 /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_SYS_CLK_FREQ 33000000 - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -/* - * Only possible on E500 Version 2 or newer cores. - */ -#define CONFIG_ENABLE_36BIT_PHYS 1 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#define CONFIG_CMD_SDRAM 1 /* SDRAM DIMM SPD info printout */ -#define CONFIG_ENABLE_36BIT_PHYS 1 -#undef CONFIG_SYS_DRAM_TEST -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - -#define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR2 -#undef CONFIG_FSL_DDR_INTERACTIVE -#define CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -/* Manually set up DDR parameters */ -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f /* 0-1024 */ -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000102 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x38355322 -#define CONFIG_SYS_DDR_TIMING_2 0x039048c7 -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x00000432 -#define CONFIG_SYS_DDR_INTERVAL 0x05150100 -#define DDR_SDRAM_CFG 0x43000000 - -#undef CONFIG_CLOCKS_IN_MHZ - -/* - * Local Bus Definitions - */ - -/* - * FLASH on the Local Bus - * based on flash chip S29GL01GP - * One bank, 128M, using the CFI driver. - * Boot from BR0 bank at 0xf800_0000 - * - * BR0: - * Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0 - * Port Size = 16 bits = BRx[19:20] = 10 - * Use GPCM = BRx[24:26] = 000 - * Valid = BRx[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001 BR0 - * - * OR0: - * Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0 - * Reserved ORx[17:18] = 00 - * CSNT = ORx[20] = 1 - * ACS = half cycle delay = ORx[21:22] = 11 - * SCY = 6 = ORx[24:27] = 0110 - * TRLX = use relaxed timing = ORx[29] = 1 - * EAD = use external address latch delay = OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65 ORx - */ - -#define CONFIG_SYS_BOOT_BLOCK 0xf8000000 /* boot TLB block */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK /* start of FLASH 128M */ - -#define CONFIG_SYS_BR0_PRELIM 0xf8001001 - -#define CONFIG_SYS_OR0_PRELIM 0xf8000E65 - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 512000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 8000 /* Flash Write Timeout (ms) */ - - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* - * Flash on the LocalBus - */ -#define CONFIG_SYS_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ - -/* Memory */ -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ -#define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */ - -#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BUS -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 -#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ - -#ifdef CONFIG_PCI2 -#define CONFIG_SYS_PCI2_MEM_BUS 0xC0000000 -#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BUS -#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCI2_IO_PHYS 0xe2800000 -#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ -#endif - -#ifdef CONFIG_PCIE1 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xe3000000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ -#endif - - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#if defined(CONFIG_PCI) - -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif /* CONFIG_PCI */ - -#if defined(CONFIG_TSEC_ENET) - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC1" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC2" -#define CONFIG_TSEC4 1 -#define CONFIG_TSEC4_NAME "eTSEC3" -#undef CONFIG_MPC85XX_FEC - -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC3_PHY_ADDR 2 -#define TSEC4_PHY_ADDR 3 - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 -#define TSEC4_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define TSEC3_FLAGS TSEC_GIGABIT -#define TSEC4_FLAGS TSEC_GIGABIT - -/* Options are: eTSEC[0-3] */ -#define CONFIG_ETHPRIME "eTSEC2" -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#endif /* CONFIG_TSEC_ENET */ - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ -#define CONFIG_ENV_SIZE 0x2000 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:00:FD -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD -#define CONFIG_HAS_ETH3 -#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD -#endif - -#define CONFIG_IPADDR 10.101.43.142 - -#define CONFIG_HOSTNAME atum -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE /tftpboot/uImage.atum -#define CONFIG_UBOOTPATH /tftpboot/uboot.bin /* TFTP server */ - -#define CONFIG_SERVERIP 10.101.43.10 -#define CONFIG_GATEWAYIP 10.101.45.1 -#define CONFIG_NETMASK 255.255.248.0 - -#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr - $dtbaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $dtbaddr $dtbfile;" \ - "bootm $loadaddr $ramdiskaddr $dtbaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index c237991adc5..abccfd6439e 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -509,6 +509,7 @@ extern int board_pci_host_broken(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 385c7c321b0..ea3056b93f7 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -517,6 +517,7 @@ #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 5c5be0ce919..d1ae35db0de 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2009,2010 Freescale Semiconductor, Inc. + * Copyright 2007-2009,2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -78,7 +78,6 @@ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ #define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ @@ -145,7 +144,6 @@ #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD -#undef CONFIG_DDR_DLL #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -486,6 +484,7 @@ #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 1" #define CONFIG_SYS_PCIE1_MEM_VIRT 0x90000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xf8000000 @@ -505,6 +504,7 @@ #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 2" #define CONFIG_SYS_PCIE2_MEM_VIRT 0x98000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xf8000000 @@ -524,6 +524,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address 8000 */ +#define CONFIG_SYS_PCIE3_NAME "Slot 3" #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 @@ -717,6 +718,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 9386f648859..8b3aff8e066 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2011 Freescale Semiconductor. * (C) Copyright 2002,2003 Motorola,Inc. * Xianghua Xiao <X.Xiao@motorola.com> * @@ -424,6 +424,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h deleted file mode 100644 index a9689498149..00000000000 --- a/include/configs/MPC8540EVAL.h +++ /dev/null @@ -1,362 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Modified by Lunsheng Wang, lunsheng@sohu.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* mpc8540eval board configuration file */ -/* please refer to doc/README.mpc85xxads for more info */ -/* make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC8540 1 /* MPC8540 specific */ -#define CONFIG_MPC8540EVAL 1 /* MPC8540EVAL board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xfff80000 - -#undef CONFIG_PCI /* pci ethernet support */ -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you only need a flash-boot image(u-boot.bin),if unsure undef this. - * Not availabe for EVAL board - */ -#undef CONFIG_RAM_AS_FLASH - -/* sysclk for MPC8540EVAL */ -#if defined(CONFIG_SYSCLK_66M) - /* - * the oscillator on board is 66Mhz - * can also get 66M clock from external PCI - */ - #define CONFIG_SYS_CLK_FREQ 66000000 -#else - #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -#if defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) -#error "You can only use either PCI Ethernet Card or TSEC Ethernet, not both." -#endif - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is now 256MB */ - -#if defined(CONFIG_RAM_AS_FLASH) -#define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ -#else -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 0MB */ - -#if defined(CONFIG_RAM_AS_FLASH) -#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 16M */ -#define CONFIG_SYS_BR0_PRELIM 0xf8001801 /* port size 32bit */ -#else /* Boot from real Flash */ -#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ -#define CONFIG_SYS_BR0_PRELIM 0xff801001 /* port size 16bit */ -#endif - -#define CONFIG_SYS_OR0_PRELIM 0xff806f67 /* 8MB Flash */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Timeout for Flash Erase (in ms)*/ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/ -#define CONFIG_SYS_FLASH_CFI 1 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#define CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ - -#undef CONFIG_CLOCKS_IN_MHZ - -/* local bus definitions */ -#define CONFIG_SYS_BR2_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CONFIG_SYS_OR2_PRELIM 0xfc006901 -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* local bus freq divider*/ -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_SYS_LBC_LSRT 0x20000000 -#define CONFIG_SYS_LBC_MRTPR 0x20000000 -#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723 -#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 -#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 - -#if defined(CONFIG_RAM_AS_FLASH) -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ -#else -#define CONFIG_SYS_BR4_PRELIM 0xf8000801 /* 32KB, 8-bit wide for ADS config reg */ -#endif -#define CONFIG_SYS_OR4_PRELIM 0xffffe1f1 -#define CONFIG_SYS_BCSR (CONFIG_SYS_BR4_PRELIM & 0xffff8000) - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* General PCI */ -#define CONFIG_SYS_PCI_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCI_MEM_SIZE 0x20000000 -#define CONFIG_SYS_PCI_IO_BASE 0xe2000000 - -#if defined(CONFIG_PCI) -#define CONFIG_NET_MULTI -#undef CONFIG_EEPRO100 -#define CONFIG_TULIP -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#if !defined(CONFIG_PCI_PNP) -#define PCI_ENET0_IOADDR 0xe0000000 -#define PCI_ENET0_MEMADDR 0xe0000000 -#define PCI_IDSEL_NUMBER 0x0c /*slot0->3(IDSEL)=12->15*/ -#endif -#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0008 -#elif defined(CONFIG_TSEC_ENET) -#define CONFIG_NET_MULTI 1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_HAS_ETH0 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_HAS_ETH1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define CONFIG_MPC85XX_FEC 1 -#define CONFIG_HAS_ETH2 -#define CONFIG_MPC85XX_FEC_NAME "FEC" -#define TSEC1_PHY_ADDR 7 -#define TSEC2_PHY_ADDR 4 -#define FEC_PHY_ADDR 2 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define FEC_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT -#define FEC_FLAGS 0 - -/* Options are: TSEC[0-1], FEC */ -#define CONFIG_ETHPRIME "TSEC0" - -#define CONFIG_PHY_M88E1011 1 /* GigaBit Ether PHY */ -#define INTEL_LXT971_PHY 1 -#endif - -/* Environment */ -#ifndef CONFIG_SYS_RAMBOOT -#if defined(CONFIG_RAM_AS_FLASH) -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) -#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ -#endif -#define CONFIG_ENV_SIZE 0x2000 -#else -/* #define CONFIG_SYS_NO_FLASH 1 */ /* Flash is not usable now */ -#define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200" -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" -#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "MPC8540EVAL=> "/* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/*****************************/ -/* Environment Configuration */ -/*****************************/ -/* The mac addresses for all ethernet interface */ -/* NOTE: change below for your network setting!!! */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:01:af:07:9b:8a -#define CONFIG_ETH1ADDR 00:01:af:07:9b:8b -#define CONFIG_ETH2ADDR 00:01:af:07:9b:8c -#endif - -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE your.uImage - -#define CONFIG_SERVERIP 192.168.101.1 -#define CONFIG_IPADDR 192.168.101.11 -#define CONFIG_GATEWAYIP 192.168.101.0 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ - -#define CONFIG_HOSTNAME MPC8540EVAL - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index 12ce6f7e66b..7101230e54f 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -436,6 +436,7 @@ extern unsigned long get_clock_freq(void); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index e94822e5b83..62bac6d64f3 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007, 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -268,6 +268,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 1, tgtid 1, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_VIRT 0x80000000 #define CONFIG_SYS_PCIE2_MEM_BUS 0x80000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x80000000 @@ -278,6 +279,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2,tgtid 2, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 @@ -288,6 +290,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 3, direct to uli, tgtid 3, Base address b000 */ +#define CONFIG_SYS_PCIE3_NAME "ULI" #define CONFIG_SYS_PCIE3_MEM_VIRT 0xb0000000 #define CONFIG_SYS_PCIE3_MEM_BUS 0xb0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xb0000000 @@ -453,6 +456,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index b221a5cc9a9..43e2c2eb17c 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007 Freescale Semiconductor. + * Copyright 2004, 2007, 2010-2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -40,10 +40,12 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 #endif +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ + #define CONFIG_PCI /* enable any pci type devices */ #define CONFIG_PCI1 /* PCI controller 1 */ #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ -#undef CONFIG_RIO #undef CONFIG_PCI2 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ @@ -89,7 +91,7 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -353,6 +355,7 @@ extern unsigned long get_clock_freq(void); #endif #ifdef CONFIG_PCIE1 +#define CONFIG_SYS_PCIE1_NAME "Slot" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 @@ -363,14 +366,13 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ #endif -#ifdef CONFIG_RIO /* * RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_VIRT 0xC0000000 -#define CONFIG_SYS_RIO_MEM_BUS 0xC0000000 -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ -#endif +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ #ifdef CONFIG_LEGACY #define BRIDGE_ID 17 @@ -493,6 +495,7 @@ extern unsigned long get_clock_freq(void); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index 334a4106d2d..106034db423 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -434,6 +434,7 @@ extern unsigned long get_clock_freq(void); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 744e4a395f8..15ebb6f1674 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2011 Freescale Semiconductor. * (C) Copyright 2002,2003 Motorola,Inc. * Xianghua Xiao <X.Xiao@motorola.com> * @@ -465,6 +465,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 281918bdc9e..3674e495c5c 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor. + * Copyright 2004-2007, 2010-2011 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -35,6 +35,9 @@ #define CONFIG_SYS_TEXT_BASE 0xfff80000 +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ + #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCI1 1 /* PCI controller */ #define CONFIG_PCIE1 1 /* PCIE controller */ @@ -82,7 +85,6 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -294,6 +296,7 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ +#define CONFIG_SYS_PCIE1_NAME "Slot" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 @@ -303,9 +306,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ -#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ #ifdef CONFIG_QE /* @@ -451,6 +455,7 @@ extern unsigned long get_clock_freq(void); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 9620fd0012d..9e24e129072 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -35,6 +35,9 @@ #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ + #define CONFIG_PCI 1 /* Disable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controller */ #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ @@ -122,7 +125,6 @@ extern unsigned long get_clock_freq(void); #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -263,12 +265,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ #endif -/* - * SDRAM on the LocalBus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ @@ -352,6 +348,7 @@ extern unsigned long get_clock_freq(void); * General PCI * Memory Addresses are mapped 1-1. I/O is mapped from 0 */ +#define CONFIG_SYS_PCIE1_NAME "Slot" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 @@ -361,9 +358,10 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ -#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000 -#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_BUS 0xC0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BUS +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ #ifdef CONFIG_QE /* @@ -561,6 +559,7 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC +#define CONFIG_FSL_ESDHC_PIN_MUX #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC @@ -594,8 +593,8 @@ extern unsigned long get_clock_freq(void); * have to be in the first 16 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) - /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 1ee95aed289..ea15831b732 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2008,2010 Freescale Semiconductor, Inc. + * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -33,6 +33,25 @@ #define CONFIG_PHYS_64BIT #endif +#ifdef CONFIG_NAND +#define CONFIG_NAND_U_BOOT +#define CONFIG_RAMBOOT_NAND +#ifdef CONFIG_NAND_SPL +#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ +#else +#define CONFIG_SYS_TEXT_BASE 0xf8f82000 +#endif /* CONFIG_NAND_SPL */ +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ #define CONFIG_E500 1 /* BOOKE e500 family */ @@ -41,10 +60,6 @@ #define CONFIG_MPC8572DS 1 #define CONFIG_MP 1 /* support multiple processors */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 -#endif - #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ @@ -81,10 +96,21 @@ #define CONFIG_PANIC_HANG /* do not reset board on panic */ /* + * Config the L2 Cache as L2 SRAM + */ +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#else +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#endif +#define CONFIG_SYS_L2_SIZE (512 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) + +/* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */ @@ -93,13 +119,18 @@ #endif #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ +#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL) +#define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR +#else +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#endif + /* DDR Setup */ #define CONFIG_VERY_BIG_RAM #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_DDR_SPD -#undef CONFIG_DDR_DLL #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -177,8 +208,11 @@ #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 + +#define CONFIG_FLASH_BR_PRELIM \ + (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ + | BR_PS_16 | BR_V) +#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7 #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 @@ -193,7 +227,12 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#if defined(CONFIG_RAMBOOT_NAND) +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#else +#undef CONFIG_SYS_RAMBOOT +#endif #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -246,6 +285,8 @@ #define PIXIS_VWATCH 0x24 /* Watchdog Register */ #define PIXIS_LED 0x25 /* LED Register */ +#define PIXIS_SPD_SYSCLK_MASK 0x7 /* SYSCLK option */ + /* old pixis referenced names */ #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ @@ -277,12 +318,22 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ +#ifndef CONFIG_NAND_SPL #define CONFIG_SYS_NAND_BASE 0xffa00000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull #else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif +#else +#define CONFIG_SYS_NAND_BASE 0xfff00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif +#endif + #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ CONFIG_SYS_NAND_BASE + 0x40000, \ CONFIG_SYS_NAND_BASE + 0x80000,\ @@ -293,6 +344,17 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +/* NAND boot: 4K NAND loader config */ +#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) +#define CONFIG_SYS_NAND_U_BOOT_START \ + (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) +#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) +#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) + + /* NAND flash config */ #define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ @@ -308,9 +370,17 @@ | OR_FCM_TRLX \ | OR_FCM_EHTR) +#ifdef CONFIG_RAMBOOT_NAND +#define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR2_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR2_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ +#else +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ - +#endif #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ @@ -341,6 +411,9 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} @@ -394,6 +467,7 @@ */ /* controller 3, direct to uli, tgtid 3, Base address 8000 */ +#define CONFIG_SYS_PCIE3_NAME "ULI" #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 @@ -413,6 +487,7 @@ #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 @@ -432,6 +507,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 @@ -546,14 +622,25 @@ /* * Environment */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 -#define CONFIG_ENV_ADDR 0xfff80000 + +#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_RAMBOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET ((512 * 1024)\ + + CONFIG_SYS_NAND_BLOCK_SIZE) +#endif + #else -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) + #define CONFIG_ENV_IS_IN_FLASH 1 + #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 + #define CONFIG_ENV_ADDR 0xfff80000 + #else + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) + #endif + #define CONFIG_ENV_SIZE 0x2000 + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -605,6 +692,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 17dac6c74f0..03ee394b398 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007, 2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -276,6 +276,7 @@ #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ /* controller 1, Base address 0xa000 */ +#define CONFIG_SYS_PCIE1_NAME "ULI" #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ @@ -284,6 +285,7 @@ #define CONFIG_SYS_PCIE1_IO_SIZE 0x00100000 /* 1M */ /* controller 2, Base Address 0x9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 #define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index ab3ae5b2e38..0cca603ff75 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -1,5 +1,5 @@ /* - * Copyright 2006, 2010 Freescale Semiconductor. + * Copyright 2006, 2010-2011 Freescale Semiconductor. * * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) * @@ -57,18 +57,14 @@ */ #define CONFIG_SYS_SCRATCH_VA 0xe0000000 -/* - * set this to enable Rapid IO. PCI and RIO are mutually exclusive - */ -/*#define CONFIG_RIO 1*/ +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ -#ifndef CONFIG_RIO /* RIO/PCI are mutually exclusive */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (ULI bridge) */ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot) */ #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ -#endif #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ @@ -319,19 +315,20 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_BASE 0x80000000 /* base address */ +#define CONFIG_SYS_SRIO1_MEM_BASE 0x80000000 /* base address */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_RIO_MEM_PHYS 0x0000000c00000000ULL +#define CONFIG_SYS_SRIO1_MEM_PHYS 0x0000000c00000000ULL #else -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE #endif -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ /* * General PCI * Addresses are mapped 1-1. */ +#define CONFIG_SYS_PCIE1_NAME "ULI" #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 @@ -513,18 +510,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #else /* CONFIG_RIO */ -#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \ +#define CONFIG_SYS_DBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT | \ BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M \ +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M \ | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_RIO_MEM_PHYS) \ +#define CONFIG_SYS_IBAT2L (BAT_PHYS_ADDR(CONFIG_SYS_SRIO1_MEM_PHYS) \ | BATL_PP_RW | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \ +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U #endif diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 7e6c40fc6fe..2b8fc7deca2 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> * Timur Tabi <timur@freescale.com> * @@ -34,7 +34,6 @@ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_SYS_HAS_SERDES /* has SERDES */ #define CONFIG_PHYS_64BIT #define CONFIG_ENABLE_36BIT_PHYS @@ -401,6 +400,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 2dfee3d1bd0..80b0b40091c 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -146,7 +146,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_FSL_DDR2 #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_DLL #define CONFIG_MEM_INIT_VALUE 0xDeadBeef @@ -359,6 +358,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ /* controller 2, Slot 2, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "Slot 1" #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 @@ -369,6 +369,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 @@ -541,6 +542,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20)/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 0af21528d9a..b6e3260d3de 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2010 Freescale Semiconductor, Inc. + * Copyright 2007-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -45,6 +45,10 @@ #define CONFIG_SYS_TEXT_BASE 0xeff80000 #endif +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ #define CONFIG_PCI 1 /* Enable PCI/PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ @@ -394,6 +398,7 @@ */ /* controller 3, Slot 1, tgtid 3, Base address b000 */ +#define CONFIG_SYS_PCIE3_NAME "Slot 1" #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 @@ -413,6 +418,7 @@ #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ /* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "ULI" #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 @@ -432,6 +438,7 @@ #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 1, Slot 2, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 2" #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 @@ -469,6 +476,24 @@ #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET #endif +/* SRIO1 uses the same window as PCIE2 mem window */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 512M */ + +/* SRIO2 uses the same window as PCIE1 mem window */ +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x20000000 /* 512M */ + #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -608,6 +633,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index 21b48e9c46b..5c818c90387 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -35,7 +35,14 @@ #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC136 + #define CONFIG_SYS_P4080_ERRATUM_CPU22 +#define CONFIG_SYS_FSL_ERRATUM_CPC_A002 +#define CONFIG_SYS_FSL_ERRATUM_CPC_A003 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 +#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #include "corenet_ds.h" diff --git a/include/configs/PM854.h b/include/configs/PM854.h deleted file mode 100644 index 1e2089fb5a9..00000000000 --- a/include/configs/PM854.h +++ /dev/null @@ -1,426 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * pm854 board configuration file - * - * Please refer to doc/README.mpc85xx for more info. - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC8540 1 /* MPC8540 specific */ -#define CONFIG_PM854 1 /* PM854 board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xfff80000 - -#define CONFIG_PCI -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33000000 - * 66000000 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - */ - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66000000 -#endif - - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ -#define CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x58 /* CTLR 0 DIMM 0 */ - -/* Manually set up DDR parameters */ -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256 MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f /* 0-256MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000102 -#define CONFIG_SYS_DDR_TIMING_1 0x47444321 -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ -#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */ - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */ - -#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of 32 MB FLASH */ -#define CONFIG_SYS_BR0_PRELIM 0xfe001801 /* port size 32bit */ - -#define CONFIG_SYS_OR0_PRELIM 0xfe006f67 /* 32 MB Flash */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#undef CONFIG_CLOCKS_IN_MHZ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ - - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#if defined(CONFIG_PCI) - -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#define CONFIG_EEPRO100 -#define CONFIG_E1000 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_TSEC_ENET) - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -#define CONFIG_MPC85XX_FEC 1 -#define CONFIG_MPC85XX_FEC_NAME "FEC" -#define FEC_PHY_ADDR 3 -#define FEC_PHYIDX 0 -#define FEC_FLAGS 0 - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 1 -#define CONFIG_HAS_ETH2 1 - -#endif /* CONFIG_TSEC_ENET */ - - -/* - * Environment - */ -#ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x80000) - #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ -#define CONFIG_LOOPW - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:40:42:01:00:00 -#define CONFIG_ETH1ADDR 00:40:42:01:00:01 -#define CONFIG_ETH2ADDR 00:40:42:01:00:02 -#endif - - -#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx -#define CONFIG_BOOTFILE pm854/uImage - -#define CONFIG_HOSTNAME pm854 -#define CONFIG_IPADDR 192.168.0.103 -#define CONFIG_SERVERIP 192.168.0.64 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=pm854/uRamdisk\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/PM856.h b/include/configs/PM856.h deleted file mode 100644 index d3e8f412e21..00000000000 --- a/include/configs/PM856.h +++ /dev/null @@ -1,429 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * MicroSys PM856 board configuration file - * - * Please refer to doc/README.mpc85xx for more info. - * - * Make sure you change the MAC address and other network params first, - * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* High Level Configuration Options */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC8560 1 /* MPC8560 specific */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ -#define CONFIG_PM856 1 /* PM856 board specific */ - -#define CONFIG_SYS_TEXT_BASE 0xfff80000 - -#define CONFIG_PCI -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -/* - * sysclk for MPC85xx - * - * Two valid values are: - * 33000000 - * 66000000 - * - * Most PCI cards are still 33Mhz, so in the presence of PCI, 33MHz - * is likely the desired value here, so that is now the default. - * The board, however, can run at 66MHz. In any event, this value - * must match the settings of some switches. Details can be found - * in the README.mpc85xxads. - */ - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66000000 -#endif - - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ - -#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - - -/* - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - */ -#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ -#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ -#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD -#define CONFIG_DDR_DLL /* possible DLL fix needed */ -#define CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */ - -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x58 /* CTLR 0 DIMM 0 */ - -/* Manually set up DDR parameters */ -#define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256 MB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f /* 0-256MB */ -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80000102 -#define CONFIG_SYS_DDR_TIMING_1 0x47444321 -#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ -#define CONFIG_SYS_DDR_CONTROL 0xc2008000 /* unbuffered,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ -#define CONFIG_SYS_DDR_INTERVAL 0x045b0100 /* autocharge,no open page */ - -/* - * SDRAM on the Local Bus - */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ -#define CONFIG_SYS_LBC_SDRAM_SIZE 0 /* LBC SDRAM is 0 MB */ - -#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ -#define CONFIG_SYS_BR0_PRELIM 0xfe001801 /* port size 32bit */ - -#define CONFIG_SYS_OR0_PRELIM 0xfe006f67 /* 32MB Flash */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#undef CONFIG_CLOCKS_IN_MHZ - - -/* - * Local Bus Definitions - */ - -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer prescal*/ - - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x58 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ - -/* - * General PCI - * Addresses are mapped 1-1. - */ -#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 -#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE -#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCI1_IO_BASE 0xe2000000 -#define CONFIG_SYS_PCI1_IO_PHYS CONFIG_SYS_PCI1_IO_BASE -#define CONFIG_SYS_PCI1_IO_SIZE 0x1000000 /* 16M */ - -#if defined(CONFIG_PCI) - -#define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#undef CONFIG_EEPRO100 -#undef CONFIG_TULIP - -#if !defined(CONFIG_PCI_PNP) - #define PCI_ENET0_IOADDR 0xe0000000 - #define PCI_ENET0_MEMADDR 0xe0000000 - #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ -#endif - -#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ - -#endif /* CONFIG_PCI */ - - -#if defined(CONFIG_TSEC_ENET) - -#ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 -#endif - -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0 -#define TSEC2_PHY_ADDR 1 -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -#endif /* CONFIG_TSEC_ENET */ - -#define CONFIG_ETHPRIME "TSEC0" - -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ - - -/* - * - Rx-CLK is CLK15 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ -#define CONFIG_ETHER_ON_FCC3 -#define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK) -#define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14) -#define CONFIG_SYS_CPMFCR_RAMTYPE 0 -#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) - -/* - * Environment - */ -#ifndef CONFIG_SYS_RAMBOOT - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x80000) - #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ -#define CONFIG_LOOPW - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - - -/* - * Environment Configuration - */ - -/* The mac addresses for all ethernet interface */ -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -#define CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:40:42:01:00:00 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:40:42:01:00:01 -#define CONFIG_HAS_ETH2 -#define CONFIG_ETH2ADDR 00:40:42:01:00:02 -#endif - - -#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx -#define CONFIG_BOOTFILE pm856/uImage - -#define CONFIG_HOSTNAME pm856 -#define CONFIG_IPADDR 192.168.0.103 -#define CONFIG_SERVERIP 192.168.0.64 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_NETMASK 255.255.255.0 - -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=pm856/uRamdisk\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index fd9bacc4994..72559c0c023 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -118,7 +118,7 @@ #undef CONFIG_DDR_SPD #if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ #endif #undef CONFIG_DDR_ECC /* only for ECC DDR module */ diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 890d6d9d4cc..79a958dc2ae 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -147,6 +147,10 @@ * DDR Setup */ #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#if defined(CONFIG_TQM_BIGFLASH) || \ + (!defined(CONFIG_TQM8548_AG) && !defined(CONFIG_TQM8548_BE)) +#define CONFIG_SYS_PPC_DDR_WIMGE (MAS2_I | MAS2_G) +#endif #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #ifdef CONFIG_TQM8548_AG #define CONFIG_VERY_BIG_RAM @@ -158,7 +162,7 @@ #if defined(CONFIG_TQM8540) || defined(CONFIG_TQM8560) /* TQM8540 & 8560 need DLL-override */ -#define CONFIG_DDR_DLL /* DLL fix needed */ +#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ #define CONFIG_DDR_DEFAULT_CL 25 /* CAS latency 2,5 */ #endif /* CONFIG_TQM8540 || CONFIG_TQM8560 */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 454a30a040c..23bbd42af27 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -50,8 +50,8 @@ #define CONFIG_PCIE3 /* PCIE controler 3 */ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_SYS_HAS_SERDES /* has SERDES */ +#define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ @@ -266,21 +266,21 @@ /* * RapidIO */ -#define CONFIG_SYS_RIO1_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_RIO1_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull #else -#define CONFIG_SYS_RIO1_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 #endif -#define CONFIG_SYS_RIO1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_RIO2_MEM_VIRT 0xb0000000 +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_RIO2_MEM_PHYS 0xc30000000ull +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull #else -#define CONFIG_SYS_RIO2_MEM_PHYS 0xb0000000 +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 #endif -#define CONFIG_SYS_RIO2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* * General PCI @@ -532,6 +532,7 @@ * the maximum mapped by the Linux kernel during initialization. */ #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ #ifdef CONFIG_CMD_KGDB #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 101c5d943d3..435b148f3c3 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -116,7 +116,7 @@ #undef CONFIG_DDR_SPD #if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ #endif #undef CONFIG_DDR_ECC /* only for ECC DDR module */ diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 90d84eba8ae..8d9f931b7f0 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -57,6 +57,9 @@ */ #define CONFIG_SYS_SCRATCH_VA 0xe8000000 +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ + #define CONFIG_PCI 1 /* Enable PCIE */ #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ @@ -297,9 +300,9 @@ /* * RapidIO MMU */ -#define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ -#define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE -#define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ +#define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000 /* base address */ +#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */ /* * General PCI @@ -417,10 +420,10 @@ * BAT2 512M Cache-inhibited, guarded * 0xc000_0000 512M RapidIO Memory */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW \ +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \ | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U /* diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index c2497ad09c1..fc3881d22ba 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -123,7 +123,7 @@ #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#define CONFIG_DDR_DLL /* possible DLL fix needed */ +#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 996120a02b1..d5dd94f5515 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -135,7 +135,6 @@ #undef CONFIG_FSL_DDR_INTERACTIVE #undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef diff --git a/include/pci.h b/include/pci.h index c4560060317..e80b6bdf506 100644 --- a/include/pci.h +++ b/include/pci.h @@ -511,6 +511,7 @@ extern int pci_hose_write_config_word_via_dword(struct pci_controller *hose, extern void *pci_map_bar(pci_dev_t pdev, int bar, int flags); extern void pci_register_hose(struct pci_controller* hose); extern struct pci_controller* pci_bus_to_hose(int bus); +extern struct pci_controller *find_hose_by_cfg_addr(void *cfg_addr); extern int pci_hose_scan(struct pci_controller *hose); extern int pci_hose_scan_bus(struct pci_controller *hose, int bus); diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile new file mode 100644 index 00000000000..e2181e96914 --- /dev/null +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -0,0 +1,133 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# Copyright 2009-2010 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +NAND_SPL := y +CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 +PAD_TO := 0xfff01000 + +include $(TOPDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o resetvec.o +COBJS = cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \ + nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +$(obj)cache.c: + @rm -f $(obj)cache.c + ln -sf $(SRCTREE)/arch/powerpc/lib/cache.c $(obj)cache.c + +$(obj)cpu_init_early.c: + @rm -f $(obj)cpu_init_early.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c + +$(obj)cpu_init_nand.c: + @rm -f $(obj)cpu_init_nand.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c + +$(obj)fsl_law.c: + @rm -f $(obj)fsl_law.c + ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c + +$(obj)law.c: + @rm -f $(obj)law.c + ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c + +$(obj)nand_boot_fsl_elbc.c: + @rm -f $(obj)nand_boot_fsl_elbc.c + ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \ + $(obj)nand_boot_fsl_elbc.c + +$(obj)ns16550.c: + @rm -f $(obj)ns16550.c + ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/$(CPUDIR)/resetvec.S $(obj)resetvec.S + +$(obj)fixed_ivor.S: + @rm -f $(obj)fixed_ivor.S + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S + +$(obj)start.S: $(obj)fixed_ivor.S + @rm -f $(obj)start.S + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/start.S $(obj)start.S + +$(obj)tlb.c: + @rm -f $(obj)tlb.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/tlb.c $(obj)tlb.c + +$(obj)tlb_table.c: + @rm -f $(obj)tlb_table.c + ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c + +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c +endif + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/freescale/mpc8572ds/nand_boot.c b/nand_spl/board/freescale/mpc8572ds/nand_boot.c new file mode 100644 index 00000000000..7ca4d4dd387 --- /dev/null +++ b/nand_spl/board/freescale/mpc8572ds/nand_boot.c @@ -0,0 +1,82 @@ +/* + * Copyright 2009-2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <ns16550.h> +#include <asm/io.h> +#include <nand.h> + +u32 sysclk_tbl[] = { + 33333000, 39999600, 49999500, 66666000, + 83332500, 99999000, 133332000, 166665000 +}; + +void board_init_f(ulong bootflag) +{ + int px_spd; + u32 plat_ratio, bus_clk, sys_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + +#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM) + /* for FPGA */ + set_lbc_br(3, CONFIG_SYS_BR3_PRELIM); + set_lbc_or(3, CONFIG_SYS_OR3_PRELIM); +#else +#error CONFIG_SYS_BR3_PRELIM, CONFIG_SYS_OR3_PRELIM must be defined +#endif + + /* initialize selected port with appropriate baud rate */ + px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); + sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + bus_clk = sys_clk * plat_ratio / 2; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); + + puts("\nNAND boot... "); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, + CONFIG_SYS_NAND_U_BOOT_RELOC); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + nand_boot(); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); + + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} |