summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/microblaze/cpu/start.S60
-rw-r--r--arch/microblaze/include/asm/byteorder.h4
-rw-r--r--arch/microblaze/lib/board.c12
-rw-r--r--board/xilinx/microblaze-generic/microblaze-generic.c13
-rw-r--r--include/configs/microblaze-generic.h236
5 files changed, 207 insertions, 118 deletions
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 2e9a08dc54d..7f6043413e3 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -32,6 +32,22 @@ _start:
mts rmsr, r0 /* disable cache */
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
+
+ /* Find-out if u-boot is running on BIG/LITTLE endian platform
+ * There are some steps which is necessary to keep in mind:
+ * 1. Setup offset value to r6
+ * 2. Store word offset value to address 0x0
+ * 3. Load just byte from address 0x0
+ * 4a) LITTLE endian - r10 contains 0x2 because it is the smallest
+ * value that's why is on address 0x0
+ * 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
+ */
+ addik r6, r0, 0x2 /* BIG/LITTLE endian offset */
+ swi r6, r0, 0
+ lbui r10, r0, 0
+ swi r6, r0, 0x40
+ swi r10, r0, 0x50
+
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
swi r6, r0, 0x0 /* reset address */
@@ -75,26 +91,52 @@ _start:
/* user_vector_exception */
addik r6, r0, _exception_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0xa
- shi r6, r0, 0xe
+ /*
+ * BIG ENDIAN memory map for user exception
+ * 0x8: 0xB000XXXX
+ * 0xC: 0xB808XXXX
+ *
+ * then it is necessary to count address for storing the most significant
+ * 16bits from _exception_handler address and copy it to
+ * 0xa address. Big endian use offset in r10=0 that's why is it just
+ * 0xa address. The same is done for the least significant 16 bits
+ * for 0xe address.
+ *
+ * LITTLE ENDIAN memory map for user exception
+ * 0x8: 0xXXXX00B0
+ * 0xC: 0xXXXX08B8
+ *
+ * Offset is for little endian setup to 0x2. rsubi instruction decrease
+ * address value to ensure that points to proper place which is
+ * 0x8 for the most significant 16 bits and
+ * 0xC for the least significant 16 bits
+ */
+ lhu r7, r1, r10
+ rsubi r8, r10, 0xa
+ sh r7, r0, r8
+ rsubi r8, r10, 0xe
+ sh r6, r0, r8
#endif
#ifdef CONFIG_SYS_INTC_0
/* interrupt_handler */
addik r6, r0, _interrupt_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0x12
- shi r6, r0, 0x16
+ lhu r7, r1, r10
+ rsubi r8, r10, 0x12
+ sh r7, r0, r8
+ rsubi r8, r10, 0x16
+ sh r6, r0, r8
#endif
/* hardware exception */
addik r6, r0, _hw_exception_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0x22
- shi r6, r0, 0x26
+ lhu r7, r1, r10
+ rsubi r8, r10, 0x22
+ sh r7, r0, r8
+ rsubi r8, r10, 0x26
+ sh r6, r0, r8
/* enable instruction and data cache */
mfs r12, rmsr
diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h
index a4a75b7a6dc..b2757a41f8a 100644
--- a/arch/microblaze/include/asm/byteorder.h
+++ b/arch/microblaze/include/asm/byteorder.h
@@ -50,6 +50,10 @@ static __inline__ __u16 ___arch__swab16 (__u16 half_word)
#endif /* __GNUC__ */
+#ifdef __MICROBLAZEEL__
+#include <linux/byteorder/little_endian.h>
+#else
#include <linux/byteorder/big_endian.h>
+#endif
#endif /* __MICROBLAZE_BYTEORDER_H__ */
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 3ff5c17d244..0ce040e9efc 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -31,6 +31,7 @@
#include <version.h>
#include <watchdog.h>
#include <stdio_dev.h>
+#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -42,6 +43,7 @@ extern int gpio_init (void);
#ifdef CONFIG_SYS_INTC_0
extern int interrupts_init (void);
#endif
+
#if defined(CONFIG_CMD_NET)
extern int eth_init (bd_t * bis);
#endif
@@ -165,8 +167,14 @@ void board_init (void)
#if defined(CONFIG_CMD_NET)
/* IP Address */
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- eth_init (bd);
+ bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+ printf("Net: ");
+ eth_initialize(gd->bd);
+
+ uchar enetaddr[6];
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ printf("MAC: %pM\n", enetaddr);
#endif
/* main_loop */
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index 838f1315b3f..744384c1d3a 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <config.h>
+#include <netdev.h>
#include <asm/microblaze_intc.h>
#include <asm/asm.h>
@@ -66,3 +67,15 @@ int fsl_init2 (void) {
return 0;
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ /*
+ * This board either has PCI NICs or uses the CPU's TSECs
+ * pci_eth_init() will return 0 if no NICs found, so in that case
+ * returning -1 will force cpu_eth_init() to be called.
+ */
+#ifdef CONFIG_XILINX_EMACLITE
+ return xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR);
+#endif
+}
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 9b1569a6d47..c30cc4cbc86 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007-2008 Michal Simek
+ * (C) Copyright 2007-2010 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
@@ -27,31 +27,33 @@
#include "../board/xilinx/microblaze-generic/xparameters.h"
-#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+/* MicroBlaze CPU */
+#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
- #define CONFIG_XILINX_UARTLITE
- #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
- #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
- #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
- #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
+# define CONFIG_XILINX_UARTLITE
+# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
- #define CONFIG_SYS_NS16550 1
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_REG_SIZE -4
- #define CONFIG_CONS_INDEX 1
- #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
- #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
- #define CONFIG_BAUDRATE 115200
-
- /* The following table includes the supported baudrates */
- #define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
- #define CONSOLE_ARG "console=console=ttyS0,115200\0"
+# define CONFIG_SYS_NS16550 1
+# define CONFIG_SYS_NS16550_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_CONS_INDEX 1
+# define CONFIG_SYS_NS16550_COM1 \
+ (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+# define CONFIG_BAUDRATE 115200
+
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+# define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
- #error Undefined uart
+# error Undefined uart
#endif
/* setting reset address */
@@ -59,41 +61,41 @@
/* ethernet */
#ifdef XILINX_EMACLITE_BASEADDR
- #define CONFIG_XILINX_EMACLITE 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_EMACLITE 1
+# define CONFIG_SYS_ENET
#elif XILINX_LLTEMAC_BASEADDR
- #define CONFIG_XILINX_LL_TEMAC 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_LL_TEMAC 1
+# define CONFIG_SYS_ENET
#endif
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
- #define CONFIG_SYS_GPIO_0 1
- #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+# define CONFIG_SYS_GPIO_0 1
+# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0 1
- #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+# define CONFIG_SYS_INTC_0 1
+# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
- #if (XILINX_TIMER_IRQ != -1)
- #define CONFIG_SYS_TIMER_0 1
- #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
- #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
- #define FREQUENCE XILINX_CLOCK_FREQ
- #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
- #endif
+# if (XILINX_TIMER_IRQ != -1)
+# define CONFIG_SYS_TIMER_0 1
+# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+# define FREQUENCE XILINX_CLOCK_FREQ
+# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+# endif
#elif XILINX_CLOCK_FREQ
- #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
- #error BAD CLOCK FREQ
+# error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
@@ -135,15 +137,20 @@
/* global pointer */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */
/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \
+ - CONFIG_SYS_GBL_DATA_SIZE)
/* monitor code */
-#define SIZE 0x40000
+#define SIZE 0x40000
#define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_BASE \
+ (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_END \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN SIZE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_BASE \
+ (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
/* stack */
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
@@ -152,55 +159,62 @@
#define FLASH
#ifdef FLASH
- #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
- #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
- #define CONFIG_SYS_FLASH_CFI 1
- #define CONFIG_FLASH_CFI_DRIVER 1
- #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
-
- #ifdef RAMENV
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
- #else /* !RAMENV */
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x20000
- #endif /* !RAMBOOT */
+# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
+# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
+# define CONFIG_SYS_FLASH_CFI 1
+# define CONFIG_FLASH_CFI_DRIVER 1
+/* ?empty sector */
+# define CONFIG_SYS_FLASH_EMPTY_INFO 1
+/* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* max number of sectors on one chip */
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
+
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* !RAMENV */
+# define CONFIG_ENV_IS_IN_FLASH 1
+/* 128K(one sector) for env */
+# define CONFIG_ENV_SECT_SIZE 0x20000
+# define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+# define CONFIG_ENV_SIZE 0x20000
+# endif /* !RAMBOOT */
#else /* !FLASH */
- /* ENV in RAM */
- #define CONFIG_SYS_NO_FLASH 1
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
+/* ENV in RAM */
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
#endif /* !FLASH */
/* system ace */
#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
+# define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+# define SYSTEMACE_CONFIG_FPGA
+# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+# define CONFIG_DOS_PARTITION
#endif
#if defined(XILINX_USE_ICACHE)
- #define CONFIG_ICACHE
+# define CONFIG_ICACHE
#else
- #undef CONFIG_ICACHE
+# undef CONFIG_ICACHE
#endif
#if defined(XILINX_USE_DCACHE)
- #define CONFIG_DCACHE
+# define CONFIG_DCACHE
#else
- #undef CONFIG_DCACHE
+# undef CONFIG_DCACHE
#endif
/*
@@ -222,36 +236,39 @@
#define CONFIG_CMD_ECHO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
- #define CONFIG_CMD_CACHE
+# define CONFIG_CMD_CACHE
#else
- #undef CONFIG_CMD_CACHE
+# undef CONFIG_CMD_CACHE
#endif
#ifndef CONFIG_SYS_ENET
- #undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NET
+# undef CONFIG_NET_MULTI
#else
- #define CONFIG_CMD_PING
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_NET_MULTI
#endif
#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_FLASH
- #define CONFIG_CMD_IMLS
- #define CONFIG_CMD_JFFS2
-
- #if !defined(RAMENV)
- #define CONFIG_CMD_SAVEENV
- #define CONFIG_CMD_SAVES
- #endif
+# define CONFIG_CMD_ECHO
+# define CONFIG_CMD_FLASH
+# define CONFIG_CMD_IMLS
+# define CONFIG_CMD_JFFS2
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVEENV
+# define CONFIG_CMD_SAVES
+# endif
#else
- #undef CONFIG_CMD_IMLS
- #undef CONFIG_CMD_FLASH
- #undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_IMLS
+# undef CONFIG_CMD_FLASH
+# undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -259,21 +276,26 @@
#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=ml401-0"
+#define MTDIDS_DEFAULT "nor0=flash-0"
/* default mtd partition table */
-#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\
+#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
"256k(env),3m(kernel),1m(romfs),"\
"1m(cramfs),-(jffs2)"
#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
-#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+/* size of console buffer */
+#define CONFIG_SYS_CBSIZE 512
+ /* print buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
@@ -290,9 +312,9 @@
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
- "nor0=ml401-0\0"\
- "mtdparts=mtdparts=ml401-0:"\
+#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
+ "nor0=flash-0\0"\
+ "mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
"1m(romfs),1m(cramfs),-(jffs2)\0"
@@ -301,7 +323,7 @@
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#endif /* __CONFIG_H */
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-05 21:52:27 +0000