summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README4
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c5
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h1
-rw-r--r--board/freescale/t104xrdb/spl.c4
-rw-r--r--include/configs/T104xRDB.h10
5 files changed, 20 insertions, 4 deletions
diff --git a/README b/README
index 66770b6485..0c892d8a43 100644
--- a/README
+++ b/README
@@ -409,6 +409,10 @@ The following options need to be configured:
Enables a workaround for IFC erratum A003399. It is only
requred during NOR boot.
+ CONFIG_A008044_WORKAROUND
+ Enables a workaround for T1040/T1042 erratum A008044. It is only
+ requred during NAND boot and valid for Rev 1.0 SoC revision
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index fe3eb06324..b134096f90 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -313,7 +313,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A005434
puts("Work-around for Erratum A-005434 enabled\n");
#endif
-
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008044) && \
+ defined(CONFIG_A008044_WORKAROUND)
+ puts("Work-around for Erratum A-008044 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7860b40884..bcce5a3ab7 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -769,6 +769,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_SYS_FSL_ERRATUM_A008044
#define CONFIG_SYS_FMAN_V3
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
index 3822a37738..75d9d9c5fa 100644
--- a/board/freescale/t104xrdb/spl.c
+++ b/board/freescale/t104xrdb/spl.c
@@ -34,12 +34,12 @@ unsigned long get_board_ddr_clk(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, uart_clk;
-#ifdef CONFIG_SPL_NAND_BOOT
+#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
u32 porsr1, pinctl;
#endif
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#ifdef CONFIG_SPL_NAND_BOOT
+#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
/*
* There is T1040 SoC issue where NOR, FPGA are inaccessible during
* NAND boot because IFC signals > IFC_AD7 are not enabled.
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 216f34f75b..6f41dcec2a 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -13,6 +13,9 @@
#define CONFIG_T104xRDB
#define CONFIG_PHYS_64BIT
+#define CONFIG_E500 /* BOOKE e500 family */
+#include <asm/config_mpc85xx.h>
+
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
#ifdef CONFIG_T1040RDB
@@ -93,7 +96,6 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */
@@ -386,6 +388,12 @@
#define CONFIG_SYS_RAMBOOT
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008044
+#if defined(CONFIG_NAND)
+#define CONFIG_A008044_WORKAROUND
+#endif
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R