summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/altera/cyclone5-socdk/socfpga.c40
-rw-r--r--include/configs/socfpga_cyclone5_socdk.h7
2 files changed, 0 insertions, 47 deletions
diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c
index 0fbbc3456ca..ccb1b4b063e 100644
--- a/board/altera/cyclone5-socdk/socfpga.c
+++ b/board/altera/cyclone5-socdk/socfpga.c
@@ -12,10 +12,6 @@
#include <usb/dwc2_udc.h>
#include <usb_mass_storage.h>
-#include <micrel.h>
-#include <netdev.h>
-#include <phy.h>
-
DECLARE_GLOBAL_DATA_PTR;
void s_init(void) {}
@@ -31,42 +27,6 @@ int board_init(void)
return 0;
}
-/*
- * PHY configuration
- */
-#ifdef CONFIG_PHY_MICREL_KSZ9021
-int board_phy_config(struct phy_device *phydev)
-{
- int ret;
- /*
- * These skew settings for the KSZ9021 ethernet phy is required for ethernet
- * to work reliably on most flavors of cyclone5 boards.
- */
- ret = ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
- 0x0);
- if (ret)
- return ret;
-
- ret = ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
- 0x0);
- if (ret)
- return ret;
-
- ret = ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
- 0xf0f0);
- if (ret)
- return ret;
-
- if (phydev->drv->config)
- return phydev->drv->config(phydev);
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_USB_GADGET
struct dwc2_plat_otg_data socfpga_otg_data = {
.regs_otg = CONFIG_USB_DWC2_REG_ADDR,
diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h
index 67bb35fa074..5e4a7098049 100644
--- a/include/configs/socfpga_cyclone5_socdk.h
+++ b/include/configs/socfpga_cyclone5_socdk.h
@@ -47,15 +47,8 @@
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
-
-/* PHY */
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
-#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
-#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
-#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
-#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
-
#endif
#define CONFIG_ENV_IS_IN_MMC