diff options
51 files changed, 71 insertions, 168 deletions
@@ -368,8 +368,10 @@ The following options need to be configured: * Adds the "fdt" command * The bootm command automatically updates the fdt - OF_CPU - The proper name of the cpus node. - OF_SOC - The proper name of the soc node. + OF_CPU - The proper name of the cpus node (only required for + MPC512X and MPC5xxx based boards). + OF_SOC - The proper name of the soc node (only required for + MPC512X and MPC5xxx based boards). OF_TBCLK - The timebase frequency. OF_STDOUT_PATH - The path to the console device @@ -3008,14 +3010,6 @@ Some configuration options can be set using Environment Variables: configuration from the BOOTP server, but not try to load any image using TFTP - autoscript - if set to "yes" commands like "loadb", "loady", - "bootp", "tftpb", "rarpboot" and "nfs" will attempt - to automatically run script images (by internally - calling "source"). - - autoscript_uname - if script image is in a format (FIT) this - variable is used to get script subimage unit name. - autostart - if set to "yes", an image loaded using the "bootp", "rarpboot", "tftpboot" or "diskboot" commands will be automatically started (by internally calling diff --git a/board/LEOX/elpt860/README.LEOX b/board/LEOX/elpt860/README.LEOX index 25524af69c..e8ab86717d 100644 --- a/board/LEOX/elpt860/README.LEOX +++ b/board/LEOX/elpt860/README.LEOX @@ -68,7 +68,6 @@ Type "run nfsboot" to mount root filesystem over NFS Hit any key to stop autoboot: 0 LEOX_elpt860: help askenv - get environment variables from stdin -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bootm - boot application image from memory @@ -100,6 +99,7 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory tftpboot- boot image via network using TFTP protocol and env variables ipaddr and serverip version - print monitor version diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c index 2c89d62f61..568fdf5f2e 100644 --- a/board/linkstation/ide.c +++ b/board/linkstation/ide.c @@ -54,11 +54,13 @@ int ide_preinit (void) if (devbusfn == -1) devbusfn = pci_find_device(PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0); if (devbusfn != -1) { + u32 ide_bus_offset32; + status = 0; pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, - (u32 *) &ide_bus_offset[0]); - ide_bus_offset[0] &= 0xfffffffe; + &ide_bus_offset32); + ide_bus_offset[0] = ide_bus_offset32 & 0xfffffffe; ide_bus_offset[0] = pci_hose_bus_to_phys(&hose, ide_bus_offset[0] & 0xfffffffe, PCI_REGION_IO); diff --git a/board/matrix_vision/mvbc_p/mvbc_p_autoscript b/board/matrix_vision/mvbc_p/mvbc_p_autoscript index 1102354d68..9b21f30ece 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p_autoscript +++ b/board/matrix_vision/mvbc_p/mvbc_p_autoscript @@ -26,7 +26,7 @@ if test ${oprofile} = yes; then setenv addprofile setenv bootargs \${bootargs} profile=\${profile} fi -if test ${autoscr_boot} != no; +if test ${autoscript_boot} != no; then if test ${netboot} = yes; then @@ -44,5 +44,5 @@ then echo "=== bootfromflash ===" run cpdtb rundtb bootfromflash else - echo "=== boot stopped with autoscr_boot no ===" + echo "=== boot stopped with autoscript_boot no ===" fi diff --git a/board/matrix_vision/mvblm7/mvblm7_autoscript b/board/matrix_vision/mvblm7/mvblm7_autoscript index 6f9357fd0d..dc385fde79 100644 --- a/board/matrix_vision/mvblm7/mvblm7_autoscript +++ b/board/matrix_vision/mvblm7/mvblm7_autoscript @@ -21,7 +21,7 @@ setenv set_static_nm setenv netmask \${static_netmask} setenv set_static_gw setenv gatewayip \${static_gateway} setenv set_ip setenv ip \${ipaddr}::\${gatewayip}:\${netmask} setenv ramparam setenv bootargs root=/dev/ram0 ro rootfstype=squashfs -if test ${autoscr_boot} != no; +if test ${autoscript_boot} != no; then if test ${netboot} = yes; then @@ -39,5 +39,5 @@ then echo "=== bootfromflash ===" run cpdtb rundtb bootfromflash else - echo "=== boot stopped with autoscr_boot no ===" + echo "=== boot stopped with autoscript_boot no ===" fi diff --git a/board/musenki/README b/board/musenki/README index 135a01aa0b..084ab54ff7 100644 --- a/board/musenki/README +++ b/board/musenki/README @@ -34,7 +34,6 @@ Out: serial Err: serial Hit any key to stop autoboot: 0 => help -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bootm - boot application image from memory @@ -67,6 +66,7 @@ reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables +source - run script from memory tftpboot- boot image via network using TFTP protocol and env variables ipaddr and serverip version - print monitor version diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index a989351722..43295d6e36 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -152,24 +152,6 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) rcode = do_bootm (cmdtp, 0, 1, local_args); } -#ifdef CONFIG_SOURCE - if (load_addr) { - char *s; - - if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running \"source\" command at addr 0x%08lX", - load_addr); - - s = getenv ("autoscript_uname"); - if (s) - printf (":%s ...\n", s); - else - puts (" ...\n"); - - rcode = source (load_addr, s); - } - } -#endif return rcode; } diff --git a/common/cmd_load.c b/common/cmd_load.c index 73fbf743c9..d6bbb786da 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -513,24 +513,6 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } -#ifdef CONFIG_SOURCE - if (load_addr) { - char *s; - - if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running \"source\" command at addr 0x%08lX", - load_addr); - - s = getenv ("autoscript_uname"); - if (s) - printf (":%s ...\n", s); - else - puts (" ...\n"); - - rcode = source (load_addr, s); - } - } -#endif return rcode; } diff --git a/common/cmd_net.c b/common/cmd_net.c index 88f4e5bae5..b80a7ad8e3 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -222,21 +222,6 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) rcode = do_bootm (cmdtp, 0, 1, local_args); } -#ifdef CONFIG_SOURCE - if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { - printf ("Running \"source\" command at addr 0x%08lX", - load_addr); - - s = getenv ("autoscript_uname"); - if (s) - printf (":%s ...\n", s); - else - puts (" ...\n"); - - show_boot_progress (83); - rcode = source (load_addr, s); - } -#endif if (rcode < 0) show_boot_progress (-83); else diff --git a/common/cmd_source.c b/common/cmd_source.c index 965b8b1b04..1424d3038c 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -236,22 +236,4 @@ U_BOOT_CMD( "unit name in the form of addr:<subimg_uname>" #endif ); - -/* - * Keep for now for backward compatibility; - * remove later when support for "autoscr" goes away. - */ -static int -do_autoscr (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - printf ("\n### WARNING ### " - "\"autoscr\" is deprecated, use \"source\" instead ###\n\n"); - return do_source (cmdtp, flag, argc, argv); -} - -U_BOOT_CMD( - autoscr, 2, 0, do_autoscr, - "DEPRECATED - use \"source\" command instead", - "" -); #endif diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539 index defad3009f..b804e069a1 100644 --- a/doc/README.IPHASE4539 +++ b/doc/README.IPHASE4539 @@ -54,7 +54,6 @@ connector as follows: ------------------------------------------------------------------------------ => help -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure bootm - boot application image from memory @@ -88,6 +87,7 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory tftpboot- boot image via network using TFTP protocol and env variables ipaddr and serverip version - print monitor version diff --git a/doc/README.m52277evb b/doc/README.m52277evb index bec77b48aa..40f9028c6f 100644 --- a/doc/README.m52277evb +++ b/doc/README.m52277evb @@ -184,7 +184,6 @@ baudrate = 115200 bps -> -> help ? - alias for 'help' -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' @@ -227,5 +226,6 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory version - print monitor version -> diff --git a/doc/README.m5373evb b/doc/README.m5373evb index 0bd1101c79..5591748933 100644 --- a/doc/README.m5373evb +++ b/doc/README.m5373evb @@ -195,7 +195,6 @@ baudrate = 115200 bps -> -> help ? - alias for 'help' -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' @@ -243,6 +242,7 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory tftpboot- boot image via network using TFTP protocol version - print monitor version -> tftp 0x40800000 uImage diff --git a/doc/README.m54455evb b/doc/README.m54455evb index b769ff9957..1888e16625 100644 --- a/doc/README.m54455evb +++ b/doc/README.m54455evb @@ -276,7 +276,6 @@ baudrate = 115200 bps -> -> help ? - alias for 'help' -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' @@ -332,6 +331,7 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory tftpboot- boot image via network using TFTP protocol version - print monitor version ->bootm 4000000 diff --git a/doc/README.m5475evb b/doc/README.m5475evb index 936c01815a..f3a1d7b28b 100644 --- a/doc/README.m5475evb +++ b/doc/README.m5475evb @@ -215,7 +215,6 @@ ip_addr = 192.162.1.2 baudrate = 115200 bps -> ? ? - alias for 'help' -autoscr - run script from memory base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' @@ -260,6 +259,7 @@ run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sleep - delay execution for some time +source - run script from memory tftpboot- boot image via network using TFTP protocol usb - USB sub-system usbboot - boot from USB device diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index 0238d97d2f..5fe21e863f 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -26,25 +26,6 @@ Who: Ben Warren <biggerbadderben@gmail.com> --------------------------- -What: "autoscr" command -When: Release 2009-09 - -Why: "autosrc" is an ugly and completely non-standard name. - The "autoscr" command is deprecated and will be replaced by - - the "source" command as used by other shells such as bash. - - Starting with March 2009, both commands will be supported for - a transition period of 6 months after which "autoscr" will be - removed. During the transition period existing scripts and - environment variable names remain untouched for maximum - compatibiltiy; thse will be changed when support for the - "autoscr" command get's finally dropped. - -Who: Peter Tyser <ptyser@xes-inc.com> - ---------------------------- - What: GPL cleanup When: August 2009 Why: Over time, a couple of files have sneaked in into the U-Boot diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 856cb36c0c..7fd8a35479 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -334,6 +334,7 @@ static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_ERASE2: case NAND_CMD_READID: case NAND_CMD_STATUS: + case NAND_CMD_RESET: break; default: diff --git a/include/configs/CCM.h b/include/configs/CCM.h index d1c293ff0a..3f4a2c103e 100644 --- a/include/configs/CCM.h +++ b/include/configs/CCM.h @@ -37,6 +37,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU ... */ #define CONFIG_CCM 1 /* on a Card Controller Module */ +#define CONFIG_MISC_INIT_R /* Call misc_init_r() */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index fca6de0c6b..d131aeaf43 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -38,6 +38,7 @@ #define CONFIG_CPCI405 1 /* ...on a CPCI405 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index fd04566089..07c4e35995 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -40,6 +40,7 @@ #undef CONFIG_CPCI405_6U /* enable this for 6U boards */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index d718ed40a3..c78552bbd4 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -40,6 +40,7 @@ #define CONFIG_CPCI405AB 1 /* ...and special AB version */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 09df47082b..59e0778f6a 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -39,6 +39,7 @@ #define CONFIG_CPCI405_VER2 1 /* ...version 2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h index ff58ea9223..0f56302003 100644 --- a/include/configs/ELPT860.h +++ b/include/configs/ELPT860.h @@ -57,6 +57,7 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* BOOT arguments */ #define CONFIG_PREBOOT \ diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 4c4af054b2..147a8b267d 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -125,8 +125,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_CPU "PowerPC,8247@0" -#define OF_SOC "soc@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc@f0000000/serial8250@e0008000" diff --git a/include/configs/IP860.h b/include/configs/IP860.h index 125aa6c802..be63ea5736 100644 --- a/include/configs/IP860.h +++ b/include/configs/IP860.h @@ -36,6 +36,7 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_IP860 1 /* ...on a IP860 board */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index cd100df057..1a4924e1e6 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -52,6 +52,8 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_8xx_GCLK_FREQ 50331648 +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ + #define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ #if 0 diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index 125cb4b203..256cabd036 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -49,6 +49,8 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 115200 +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ + #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_8xx_GCLK_FREQ 50331648 diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h index 942a4cc487..39b8b8fce4 100644 --- a/include/configs/MPC8260ADS.h +++ b/include/configs/MPC8260ADS.h @@ -81,6 +81,7 @@ #endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* allow serial and ethaddr to be overwritten */ #define CONFIG_ENV_OVERWRITE @@ -209,7 +210,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 #if defined(CONFIG_OF_LIBFDT) -#define OF_CPU "cpu@0" #define OF_TBCLK (bd->bi_busfreq / 4) #endif diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h index 4fd86d3923..b0162c3971 100644 --- a/include/configs/MPC8266ADS.h +++ b/include/configs/MPC8266ADS.h @@ -54,6 +54,7 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* allow serial and ethaddr to be overwritten */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index c1a1a6d923..8ddce5c699 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -48,6 +48,7 @@ #undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ #define CONFIG_ENV_OVERWRITE #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* * sysclk for MPC85xx diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 0c228cb5a0..8f6b16b93b 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -73,8 +73,8 @@ #define MV_INITRD_LENGTH 0x00400000 #define MV_SCRATCH_ADDR 0x00000000 #define MV_SCRATCH_LENGTH MV_INITRD_LENGTH -#define MV_SOURCE_ADDR 0xff840000 -#define MV_SOURCE_ADDR2 0xff850000 +#define MV_SCRIPT_ADDR 0xff840000 +#define MV_SCRIPT_ADDR2 0xff850000 #define MV_DTB_ADDR 0xfffc0000 #define CONFIG_SHOW_BOOT_PROGRESS 1 @@ -130,9 +130,9 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 1000 -#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then source ${autoscr_addr}; \ - else source ${autoscr_addr2}; \ +#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; \ + then source ${script_addr}; \ + else source ${script_addr2}; \ fi;" #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" @@ -150,8 +150,8 @@ "fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ + "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0" \ + "script_addr2=" MK_STR(MV_SCRIPT_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index 80334bd607..9835567838 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -399,8 +399,8 @@ #define MV_FPGA_SIZE 0 #define MV_KERNEL_ADDR 0xff810000 #define MV_INITRD_ADDR 0xffb00000 -#define MV_SOURCE_ADDR 0xff804000 -#define MV_SOURCE_ADDR2 0xff806000 +#define MV_SCRIPT_ADDR 0xff804000 +#define MV_SCRIPT_ADDR2 0xff806000 #define MV_DTB_ADDR 0xff808000 #define MV_INITRD_LENGTH 0x00400000 @@ -410,9 +410,9 @@ #define MV_DTB_ADDR_RAM 0x00600000 #define MV_INITRD_ADDR_RAM 0x01000000 -#define CONFIG_BOOTCOMMAND "if imi ${autoscr_addr}; \ - then source ${autoscr_addr}; \ - else source ${autoscr_addr2}; \ +#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; \ + then source ${script_addr}; \ + else source ${script_addr2}; \ fi;" #define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs" @@ -425,8 +425,8 @@ "fpga=0\0" \ "fpgadata=" MK_STR(MV_FPGA_DATA) "\0" \ "fpgadatasize=" MK_STR(MV_FPGA_SIZE) "\0" \ - "autoscr_addr=" MK_STR(MV_SOURCE_ADDR) "\0" \ - "autoscr_addr2=" MK_STR(MV_SOURCE_ADDR2) "\0" \ + "script_addr=" MK_STR(MV_SCRIPT_ADDR) "\0" \ + "script_addr2=" MK_STR(MV_SCRIPT_ADDR2) "\0" \ "mv_kernel_addr=" MK_STR(MV_KERNEL_ADDR) "\0" \ "mv_kernel_addr_ram=" MK_STR(MV_KERNEL_ADDR_RAM) "\0" \ "mv_initrd_addr=" MK_STR(MV_INITRD_ADDR) "\0" \ diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index e97ef9565a..da962f3b93 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -189,6 +189,7 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ /* * Miscellaneous configurable options diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 7239f8409d..272b5dd56c 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -77,6 +77,7 @@ #undef CONFIG_BTB /* toggle branch predition */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index 4181a400e8..fa77882cfd 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -36,6 +36,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_SPD823TS 1 /* ...on a SPD823TS board */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE diff --git a/include/configs/W7OLMC.h b/include/configs/W7OLMC.h index 40e4735b68..c0179150c2 100644 --- a/include/configs/W7OLMC.h +++ b/include/configs/W7OLMC.h @@ -40,6 +40,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/W7OLMG.h b/include/configs/W7OLMG.h index a62f1b4d57..1d4ad13ed3 100644 --- a/include/configs/W7OLMG.h +++ b/include/configs/W7OLMG.h @@ -40,6 +40,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_F 1 /* and misc_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* and misc_init_r() */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h index c580230225..566565aad2 100644 --- a/include/configs/cogent_mpc8260.h +++ b/include/configs/cogent_mpc8260.h @@ -38,6 +38,7 @@ #define CONFIG_CPM2 1 /* Has a CPM2 */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_MISC_INIT_R /* Use misc_init_r() */ /* Cogent Modular Architecture options */ #define CONFIG_CMA282 1 /* ...on a CMA282 CPU module */ diff --git a/include/configs/cogent_mpc8xx.h b/include/configs/cogent_mpc8xx.h index 17bd9a0274..750c0df0c5 100644 --- a/include/configs/cogent_mpc8xx.h +++ b/include/configs/cogent_mpc8xx.h @@ -37,6 +37,7 @@ #define CONFIG_COGENT 1 /* using Cogent Modular Architecture */ #define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_MISC_INIT_R /* Use misc_init_r() */ /* Cogent Modular Architecture options */ #define CONFIG_CMA286_60_OLD 1 /* ...on an old CMA286-60 CPU module */ diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 0cc1b3b59c..80c41a4968 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -171,7 +171,7 @@ "kernel_addr_r=200000\0" \ "fdt_addr_r=600000\0" \ "ram_ws=800000 \0" \ - "autoscr_ws=780000 \0" \ + "script_ws=780000 \0" \ "fdt_file=" xstr(CONFIG_HOSTNAME) "/" \ xstr(CONFIG_HOSTNAME) ".dtb\0" \ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \ @@ -253,8 +253,8 @@ "set_new_esw_script=setenv new_esw_script " \ "new_esw_0x${IVM_BoardId}_0x${IVM_HWKey}.scr \0" \ "new_esw=run set_new_esw_script; " \ - "tftp ${autoscr_ws} ${new_esw_script}; " \ - "iminfo ${autoscr_ws}; source ${autoscr_ws} \0" \ + "tftp ${script_ws} ${new_esw_script}; " \ + "iminfo ${script_ws}; source ${script_ws} \0" \ "bootlimit=0 \0" \ CONFIG_KM_DEF_ENV_IOMUX \ CONFIG_KM_DEF_ENV_PRIVATE \ diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 2feb3ae31d..16b464cf6d 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -96,8 +96,6 @@ #define CONFIG_OF_LIBFDT 1 -#define OF_CPU "PowerPC,603e" -#define OF_SOC "soc10x@80000000" #define OF_STDOUT_PATH "/soc10x/serial@80004600" /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 8f00773216..be20d72909 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -47,8 +47,9 @@ #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 #endif -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f() */ +#define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init() */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ #define CONFIG_LCD 1 /* use LCD controller ... */ #define CONFIG_HLD1045 1 /* ... with a HLD1045 display */ diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h index b955749d8f..55d1fc90fc 100644 --- a/include/configs/mgcoge.h +++ b/include/configs/mgcoge.h @@ -347,8 +347,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_CPU "PowerPC,8247@0" -#define OF_SOC "soc@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 4f98ba41a5..be12186aca 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -79,7 +79,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_CPU "PowerPC,7448@0" #define OF_TSI "tsi108@c0000000" #define OF_TBCLK (bd->bi_busfreq / 8) #define OF_STDOUT_PATH "/tsi108@c0000000/serial@7808" diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h index ae033b2da5..c94daa3d03 100644 --- a/include/configs/muas3001.h +++ b/include/configs/muas3001.h @@ -405,8 +405,6 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_OF_BOARD_SETUP 1 -#define OF_CPU "PowerPC,8270@0" -#define OF_SOC "soc@f0000000" #define OF_TBCLK (bd->bi_busfreq / 4) #if defined(CONFIG_MUAS_DEV_BOARD) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h index 6517381170..3aee206ad7 100644 --- a/include/configs/pcu_e.h +++ b/include/configs/pcu_e.h @@ -42,6 +42,9 @@ #define CONFIG_MPC860T 1 #define CONFIG_PCU_E 1 /* ...on a PCU E board */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ + #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 4fa501da5e..46c94bf16b 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -71,6 +71,7 @@ #undef CONFIG_BTB /* toggle branch predition */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 7e00ab8c71..57637607af 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -63,6 +63,7 @@ #define CONFIG_405GP 1 #define CONFIG_BOARD_EARLY_INIT_F 1 +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */ /* * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index 0424e2978e..86b231ca8e 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -66,6 +66,7 @@ #define CONFIG_BTB /* toggle branch predition */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index d16262b6cf..585436604f 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -509,7 +509,6 @@ typedef unsigned int led_id_t; /* pass open firmware flattened device tree */ #define CONFIG_OF_LIBFDT 1 -#define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) #endif /* __CONFIG_H */ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index e8509ee0e8..f9dbdb9a86 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -921,17 +921,7 @@ void board_init_r (gd_t *id, ulong dest_addr) /* Initialize the console (after the relocation and devices init) */ console_init_r (); -#if defined(CONFIG_CCM) || \ - defined(CONFIG_COGENT) || \ - defined(CONFIG_CPCI405) || \ - defined(CONFIG_EVB64260) || \ - defined(CONFIG_KUP4K) || \ - defined(CONFIG_KUP4X) || \ - defined(CONFIG_LWMON) || \ - defined(CONFIG_PCU_E) || \ - defined(CONFIG_SC3) || \ - defined(CONFIG_W7O) || \ - defined(CONFIG_MISC_INIT_R) +#if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ misc_init_r (); #endif @@ -1010,22 +1000,7 @@ void board_init_r (gd_t *id, ulong dest_addr) eth_initialize (bd); #endif -#if defined(CONFIG_CMD_NET) && ( \ - defined(CONFIG_CCM) || \ - defined(CONFIG_ELPT860) || \ - defined(CONFIG_EP8260) || \ - defined(CONFIG_IP860) || \ - defined(CONFIG_IVML24) || \ - defined(CONFIG_IVMS8) || \ - defined(CONFIG_MPC8260ADS) || \ - defined(CONFIG_MPC8266ADS) || \ - defined(CONFIG_MPC8560ADS) || \ - defined(CONFIG_PCU_E) || \ - defined(CONFIG_RPXSUPER) || \ - defined(CONFIG_STXGP3) || \ - defined(CONFIG_SPD823TS) || \ - defined(CONFIG_RESET_PHY_R) ) - +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) WATCHDOG_RESET (); debug ("Reset Ethernet PHY\n"); reset_phy (); |