diff options
| -rw-r--r-- | arch/arm/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi | 62 | ||||
| -rw-r--r-- | arch/arm/dts/stm32mp157c-ev1.dts | 101 | ||||
| -rw-r--r-- | board/st/stm32mp1/README | 53 | ||||
| -rw-r--r-- | configs/stm32mp15_basic_defconfig | 3 |
5 files changed, 215 insertions, 7 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 016c54da77..09adf5eab1 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -541,7 +541,8 @@ dtb-$(CONFIG_ARCH_ASPEED) += ast2500-evb.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb dtb-$(CONFIG_TARGET_STM32MP1) += \ - stm32mp157c-ed1.dtb + stm32mp157c-ed1.dtb \ + stm32mp157c-ev1.dtb targets += $(dtb-y) diff --git a/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi new file mode 100644 index 0000000000..2f4de3a066 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright : STMicroelectronics 2018 + */ + +#include "stm32mp157c-ed1-u-boot.dtsi" + +/ { + aliases { + spi0 = &qspi; + i2c1 = &i2c2; + i2c4 = &i2c5; + }; +}; + +&flash0 { + compatible = "spi-flash"; +}; + +&flash1 { + compatible = "spi-flash"; +}; + +&v3v3 { + regulator-always-on; +}; + +/* SPL part **************************************/ +&qspi { + u-boot,dm-spl; +}; + +&qspi_clk_pins_a { + u-boot,dm-spl; + pins { + u-boot,dm-spl; + }; +}; + +&qspi_bk1_pins_a { + u-boot,dm-spl; + pins1 { + u-boot,dm-spl; + }; + pins2 { + u-boot,dm-spl; + }; +}; + +&qspi_bk2_pins_a { + u-boot,dm-spl; + pins1 { + u-boot,dm-spl; + }; + pins2 { + u-boot,dm-spl; + }; +}; + +&flash0 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts new file mode 100644 index 0000000000..d6934f74e0 --- /dev/null +++ b/arch/arm/dts/stm32mp157c-ev1.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2017 - All Rights Reserved + * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. + */ +/dts-v1/; + +#include "stm32mp157c-ed1.dts" + +/ { + model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; + compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157"; + +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: mx66l51235l@0 { + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + flash1: mx66l51235l@1 { + reg = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&timers2 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm2_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@1 { + status = "okay"; + }; +}; + +&timers8 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm8_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@7 { + status = "okay"; + }; +}; + +&timers12 { + status = "disabled"; + pwm { + pinctrl-0 = <&pwm12_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + timer@11 { + status = "okay"; + }; +}; + +&usbphyc { + status = "okay"; +}; diff --git a/board/st/stm32mp1/README b/board/st/stm32mp1/README index 7d7ad8bd2a..174e6db148 100644 --- a/board/st/stm32mp1/README +++ b/board/st/stm32mp1/README @@ -29,9 +29,12 @@ Everything is supported in Linux but U-Boot is limited to: And the necessary drivers 1. I2C 2. STPMU1 -3. Clock, Reset +2. STPMU1 (PMIC and regulator) +3. Clock, Reset, Sysreset +4. Fuse Currently the following boards are supported: ++ stm32mp157c-ev1 + stm32mp157c-ed1 3. Boot Sequences @@ -61,6 +64,9 @@ Each board is configurated only with the associated device tree. You need to select the appropriate device tree for your board, the supported device trees for stm32mp157 are: ++ ev1: eval board with pmic stpmu1 (ev1 = mother board + daughter ed1) + dts: stm32mp157c-ev1 + + ed1: daughter board with pmic stpmu1 dts: stm32mp157c-ed1 @@ -98,6 +104,11 @@ the supported device trees for stm32mp157 are: example: + basic boot on ev1 + # export KBUILD_OUTPUT=stm32mp15_basic + # make stm32mp15_basic_defconfig + # make DEVICE_TREE=stm32mp157c-ev1 all + basic boot on ed1 # export KBUILD_OUTPUT=stm32mp15_basic # make stm32mp15_basic_defconfig @@ -105,7 +116,7 @@ the supported device trees for stm32mp157 are: 6. Output files - BootRom and ATF expect binaries with STM32 image header + BootRom and TF-A expect binaries with STM32 image header SPL expects file with U-Boot uImage header So in the output directory (selected by KBUILD_OUTPUT), @@ -150,8 +161,8 @@ Then the minimal GPT partition is: ----- ------- --------- ------------- | Num | Name | Size | Content | ----- ------- -------- -------------- - | 1 | fsbl1 | 256 KiB | ATF or SPL | - | 2 | fsbl2 | 256 KiB | ATF or SPL | + | 1 | fsbl1 | 256 KiB | TF-A or SPL | + | 2 | fsbl2 | 256 KiB | TF-A or SPL | | 3 | ssbl | enought | U-Boot | | * | - | - | Boot/Rootfs| ----- ------- --------- ------------- @@ -176,7 +187,9 @@ for example: with gpt table with 128 entries -n 3:1058:5153 -c 3:ssbl \ -p /dev/<SDCard dev> - you can add other partition for kernel (rootfs for example) + you can add other partitions for kernel + one partition rootfs for example: + -n 3:5154: -c 4:rootfs c) copy the FSBL (2 times) and SSBL file on the correct partition. in this example in partition 1 to 3 @@ -223,3 +236,33 @@ b) copy U-Boot in first GPT partition of eMMC # mmc write ${fileaddr} ${partstart} ${partsize} To boot from eMMC, select BootPinMode = 0 1 0 and reset. + +9. MAC Address +============== + +Please read doc/README.enetaddr for the implementation guidelines for mac id +usage. Basically, environment has precedence over board specific storage. + +Mac id storage and retrieval in stm32mp otp : +- OTP_57[31:0] = MAC_ADDR[31:0] +- OTP_58[15:0] = MAC_ADDR[47:32] + +To program a MAC address on virgin OTP words above, you can use the fuse command +on bank 0 to access to internal OTP: + + example to set mac address "12:34:56:78:9a:bc" + + 1- Write OTP + STM32MP> fuse prog -y 0 57 0x78563412 0x0000bc9a + + 2- Read OTP + STM32MP> fuse sense 0 57 2 + Sensing bank 0: + Word 0x00000039: 78563412 0000bc9a + + 3- next REBOOT : + ### Setting environment from OTP MAC address = "12:34:56:78:9a:bc" + + 4 check env update + STM32MP> print ethaddr + ethaddr=12:34:56:78:9a:bc diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 3a94db52ab..87f60be00d 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -4,7 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL=y CONFIG_TARGET_STM32MP1=y -CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ed1" +CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 @@ -31,6 +31,7 @@ CONFIG_DM_I2C=y CONFIG_SYS_I2C_STM32F7=y CONFIG_DM_MMC=y CONFIG_STM32_SDMMC2=y +# CONFIG_PINCTRL_FULL is not set # CONFIG_SPL_PINCTRL_FULL is not set CONFIG_DM_PMIC=y # CONFIG_SPL_PMIC_CHILDREN is not set |