diff options
220 files changed, 20053 insertions, 5901 deletions
@@ -512,7 +512,7 @@ config SYS_TEXT_BASE config SYS_CLK_FREQ - depends on ARC || ARCH_SUNXI + depends on ARC || ARCH_SUNXI || MPC83xx int "CPU clock frequency" help TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 0b1629ba62..c2c577f60c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -39,6 +39,12 @@ config MPC8xx endchoice +config HIGH_BATS + bool "Enable high BAT registers" + help + Enable BATs (block address translation registers) 4-7 on machines + that support them. + source "arch/powerpc/cpu/mpc83xx/Kconfig" source "arch/powerpc/cpu/mpc85xx/Kconfig" source "arch/powerpc/cpu/mpc86xx/Kconfig" diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 571cf8fc2e..b99288aa83 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -10,38 +10,66 @@ choice config TARGET_MPC8308_P1M bool "Support mpc8308_p1m" + select ARCH_MPC8308 config TARGET_SBC8349 bool "Support sbc8349" + select ARCH_MPC8349 config TARGET_VE8313 bool "Support ve8313" + select ARCH_MPC8313 config TARGET_VME8349 bool "Support vme8349" + select ARCH_MPC8349 + +config TARGET_CADDY2 + bool "Support caddy2" + select ARCH_MPC8349 config TARGET_MPC8308RDB bool "Support MPC8308RDB" + select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 -config TARGET_MPC8313ERDB - bool "Support MPC8313ERDB" +config TARGET_MPC8313ERDB_NOR + bool "Support MPC8313ERDB_NOR" + select ARCH_MPC8313 + select BOARD_EARLY_INIT_F + select SUPPORT_SPL + +config TARGET_MPC8313ERDB_NAND + bool "Support MPC8313ERDB_NAND" + select ARCH_MPC8313 select BOARD_EARLY_INIT_F select SUPPORT_SPL config TARGET_MPC8315ERDB bool "Support MPC8315ERDB" + select ARCH_MPC8315 select BOARD_EARLY_INIT_F config TARGET_MPC8323ERDB bool "Support MPC8323ERDB" + select ARCH_MPC832X config TARGET_MPC832XEMDS bool "Support MPC832XEMDS" + select ARCH_MPC832X select BOARD_EARLY_INIT_F config TARGET_MPC8349EMDS bool "Support MPC8349EMDS" + select ARCH_MPC8349 + select BOARD_EARLY_INIT_F + select SYS_FSL_DDR + select SYS_FSL_DDR_BE + select SYS_FSL_HAS_DDR2 + +config TARGET_MPC8349EMDS_SDRAM + bool "Support MPC8349EMDS_SDRAM" + select ARCH_MPC8349 select BOARD_EARLY_INIT_F select SYS_FSL_DDR select SYS_FSL_DDR_BE @@ -49,53 +77,272 @@ config TARGET_MPC8349EMDS config TARGET_MPC8349ITX bool "Support MPC8349ITX" + select ARCH_MPC8349 imply CMD_IRQ config TARGET_MPC837XEMDS bool "Support MPC837XEMDS" + select ARCH_MPC837X select BOARD_EARLY_INIT_F imply CMD_SATA imply FSL_SATA config TARGET_MPC837XERDB bool "Support MPC837XERDB" + select ARCH_MPC837X select BOARD_EARLY_INIT_F config TARGET_IDS8313 bool "Support ids8313" + select ARCH_MPC8313 select DM imply CMD_DM -config TARGET_KM8360 - bool "Support km8360" +config TARGET_KMETER1 + bool "Support kmeter1" + select ARCH_MPC8360 + imply CMD_CRAMFS + imply CMD_DIAG + imply FS_CRAMFS + +config TARGET_KMCOGE5NE + bool "Support kmcoge5ne" + select ARCH_MPC8360 imply CMD_CRAMFS imply CMD_DIAG imply FS_CRAMFS config TARGET_SUVD3 bool "Support suvd3" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMVECT1 + bool "Support kmvect1" + select ARCH_MPC8309 + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMTEGR1 + bool "Support kmtegr1" + select ARCH_MPC8309 imply CMD_CRAMFS imply FS_CRAMFS config TARGET_TUXX1 bool "Support tuxx1" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMSUPX5 + bool "Support kmsupx5" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_TUGE1 + bool "Support tuge1" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMOPTI2 + bool "Support kmopti2" + select ARCH_MPC832X + imply CMD_CRAMFS + imply FS_CRAMFS + +config TARGET_KMTEPR2 + bool "Support kmtepr2" + select ARCH_MPC832X imply CMD_CRAMFS imply FS_CRAMFS config TARGET_TQM834X bool "Support TQM834x" + select ARCH_MPC8349 config TARGET_HRCON bool "Support hrcon" + select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 config TARGET_STRIDER bool "Support strider" + select ARCH_MPC8308 select SYS_FSL_ERRATUM_ESDHC111 imply CMD_PCA953X +config TARGET_GAZERBEAM + bool "Support gazerbeam" + select ARCH_MPC8308 + select SYS_FSL_ERRATUM_ESDHC111 + imply ENV_IS_IN_FLASH + help + The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH + Systementwicklung based on the NXP MPC8308 SoC for usage in KVM + appliances. + + Features include: + * Two gigabit ethernet ports + * Multiple USB ports (depending on variant) + * Several gigabit ethernet or optical fiber ports (depending on + variant) + * Several display port inputs and outputs, and supporting redrivers + (depending on variant) + * Several FPGAs with custom logic (depending on variant) + +endchoice + +config MPC83XX_QUICC_ENGINE + bool + +# TODO: Imply MPC83xx PCI driver +config MPC83XX_PCI_SUPPORT + bool + +# TODO: Imply TSEC driver +config MPC83XX_TSEC1_SUPPORT + bool + +config MPC83XX_TSEC2_SUPPORT + bool + +config MPC83XX_PCIE1_SUPPORT + bool + +config MPC83XX_PCIE2_SUPPORT + bool + +config MPC83XX_SDHC_SUPPORT + bool + +config MPC83XX_SATA_SUPPORT + bool + +config MPC83XX_SECOND_I2C_SUPPORT + bool + +config MPC83XX_LDP_PIN + bool + +config ARCH_MPC830X + bool + select MPC83XX_SDHC_SUPPORT + +config ARCH_MPC8308 + bool + select ARCH_MPC830X + select MPC83XX_TSEC1_SUPPORT + select MPC83XX_TSEC2_SUPPORT + select MPC83XX_PCIE1_SUPPORT + select MPC83XX_SECOND_I2C_SUPPORT + +config ARCH_MPC8309 + bool + select ARCH_MPC830X + select MPC83XX_QUICC_ENGINE + select MPC83XX_PCI_SUPPORT + select MPC83XX_SECOND_I2C_SUPPORT + +config ARCH_MPC831X + bool + select MPC83XX_PCI_SUPPORT + select MPC83XX_TSEC1_SUPPORT + select MPC83XX_TSEC2_SUPPORT + +config ARCH_MPC8313 + bool + select ARCH_MPC831X + select MPC83XX_SECOND_I2C_SUPPORT + +config ARCH_MPC8315 + bool + select ARCH_MPC831X + select MPC83XX_PCIE1_SUPPORT + select MPC83XX_PCIE2_SUPPORT + select MPC83XX_SATA_SUPPORT + +config ARCH_MPC832X + bool + select MPC83XX_QUICC_ENGINE + select MPC83XX_PCI_SUPPORT + +config ARCH_MPC834X + bool + +config ARCH_MPC8349 + bool + select ARCH_MPC834X + select MPC83XX_PCI_SUPPORT + select MPC83XX_TSEC1_SUPPORT + select MPC83XX_TSEC2_SUPPORT + select MPC83XX_LDP_PIN + select MPC83XX_SECOND_I2C_SUPPORT + +config ARCH_MPC8360 + bool + select MPC83XX_QUICC_ENGINE + select MPC83XX_PCI_SUPPORT + select MPC83XX_LDP_PIN + select MPC83XX_SECOND_I2C_SUPPORT + +config ARCH_MPC837X + bool + select MPC83XX_PCI_SUPPORT + select MPC83XX_TSEC1_SUPPORT + select MPC83XX_TSEC2_SUPPORT + select MPC83XX_PCIE1_SUPPORT + select MPC83XX_PCIE2_SUPPORT + select MPC83XX_SDHC_SUPPORT + select MPC83XX_SATA_SUPPORT + select MPC83XX_LDP_PIN + select MPC83XX_SECOND_I2C_SUPPORT + +config SYS_IMMR + hex "Value for IMMR" + default 0xE0000000 + help + Address for the Internal Memory-Mapped Registers (IMMR) window used + to configure the features of the SoC. + +source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig" +source "arch/powerpc/cpu/mpc83xx/bats/Kconfig" +source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig" +source "arch/powerpc/cpu/mpc83xx/hid/Kconfig" +source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig" +source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig" +source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig" + +menu "Legacy options" + +if ARCH_MPC8349 + +#TODO(mario.six@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT +choice + prompt "PMC slot configuration" + +config PCI_ALL_PCI1 + bool "All PMC slots on PCI1" + +config PCI_ONE_PCI1 + bool "First PMC1 on PCI1" + +config PCI_TWO_PCI1 + bool "First two PMC1 on PCI1" + endchoice +config PCI_64BIT + bool "PMC2 is 64bit" + +endif + +endmenu + source "board/esd/vme8349/Kconfig" source "board/freescale/mpc8308rdb/Kconfig" source "board/freescale/mpc8313erdb/Kconfig" diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index aa4affa911..304029977e 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -29,7 +29,9 @@ obj-y += interrupts.o obj-y += ecc.o obj-$(CONFIG_QE) += qe_io.o obj-$(CONFIG_FSL_SERDES) += serdes.o +ifndef CONFIG_ARCH_MPC8308 obj-$(CONFIG_PCI) += pci.o +endif obj-$(CONFIG_PCIE) += pcie.o obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/arch/powerpc/cpu/mpc83xx/arbiter/Kconfig b/arch/powerpc/cpu/mpc83xx/arbiter/Kconfig new file mode 100644 index 0000000000..f562476da8 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/arbiter/Kconfig @@ -0,0 +1,139 @@ +menu "Arbiter" + +choice + prompt "Pipeline depth" + +config ACR_PIPE_DEP_UNSET + bool "Don't set value" + +config ACR_PIPE_DEP_1 + bool "1" + +config ACR_PIPE_DEP_2 + bool "2" + +config ACR_PIPE_DEP_3 + bool "3" + +config ACR_PIPE_DEP_4 + bool "4" + +endchoice + +choice + prompt "Repeat count" + +config ACR_RPTCNT_UNSET + bool "Don't set value" + +config ACR_RPTCNT_1 + bool "1" + +config ACR_RPTCNT_2 + bool "2" + +config ACR_RPTCNT_3 + bool "3" + +config ACR_RPTCNT_4 + bool "4" + +config ACR_RPTCNT_5 + bool "5" + +config ACR_RPTCNT_6 + bool "6" + +config ACR_RPTCNT_7 + bool "7" + +config ACR_RPTCNT_8 + bool "8" + +endchoice + +choice + prompt "Address parking" + +config ACR_APARK_UNSET + bool "Don't set value" + +config ACR_APARK_MASTER + bool "Park to master" + +config ACR_APARK_LAST + bool "Park to last owner" + +config ACR_APARK_DISABLE + bool "Disabled" + +endchoice + +choice + prompt "Parking master" + +config ACR_PARKM_UNSET + bool "Don't set value" + +config ACR_PARKM_E300 + bool "e300 core" + +config ACR_PARKM_TSEC_1_2 + bool "TSEC1, TSEC2" + +config ACR_PARKM_USB_I2C1_BOOT + bool "USB/I2C1_BOOT" + +config ACR_PARKM_DMA_ESDHC_USB + bool "DMA, ESDHC, USB" + +config ACR_PARKM_PEX + bool "PCI Express" + +if MPC83XX_QUICC_ENGINE + +config ACR_PARKM_ENC_CORE + bool "Encryption core" + +endif + +endchoice + +config ACR_PIPE_DEP + hex + default 0x0 if ACR_PIPE_DEP_UNSET + default 0x0 if ACR_PIPE_DEP_1 + default 0x10000 if ACR_PIPE_DEP_2 + default 0x20000 if ACR_PIPE_DEP_3 + default 0x30000 if ACR_PIPE_DEP_4 + +config ACR_RPTCNT + hex + default 0x0 if ACR_RPTCNT_UNSET + default 0x0 if ACR_RPTCNT_1 + default 0x100 if ACR_RPTCNT_2 + default 0x200 if ACR_RPTCNT_3 + default 0x300 if ACR_RPTCNT_4 + default 0x400 if ACR_RPTCNT_5 + default 0x500 if ACR_RPTCNT_6 + default 0x600 if ACR_RPTCNT_7 + default 0x700 if ACR_RPTCNT_8 + +config ACR_APARK + hex + default 0x0 if ACR_APARK_UNSET + default 0x0 if ACR_APARK_MASTER + default 0x10 if ACR_APARK_LAST + default 0x20 if ACR_APARK_DISABLE + +config ACR_PARKM + hex + default 0x0 if ACR_PARKM_UNSET + default 0x0 if ACR_PARKM_E300 + default 0x2 if ACR_PARKM_TSEC_1_2 + default 0x3 if ACR_PARKM_USB_I2C1_BOOT + default 0x4 if ACR_PARKM_DMA_ESDHC_USB + default 0x5 if ACR_PARKM_PEX + default 0x5 if ACR_PARKM_ENC_CORE + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/arbiter/arbiter.h b/arch/powerpc/cpu/mpc83xx/arbiter/arbiter.h new file mode 100644 index 0000000000..10a47e4987 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/arbiter/arbiter.h @@ -0,0 +1,28 @@ + const __be32 acr_mask = +#ifndef CONFIG_ACR_PIPE_DEP_UNSET + ACR_PIPE_DEP | +#endif +#ifndef CONFIG_ACR_RPTCNT_UNSET + ACR_RPTCNT | +#endif +#ifndef CONFIG_ACR_APARK_UNSET + ACR_APARK | +#endif +#ifndef CONFIG_ACR_PARKM_UNSET + ACR_PARKM | +#endif + 0; + const __be32 acr_val = +#ifndef CONFIG_ACR_PIPE_DEP_UNSET + CONFIG_ACR_PIPE_DEP | +#endif +#ifndef CONFIG_ACR_RPTCNT_UNSET + CONFIG_ACR_RPTCNT | +#endif +#ifndef CONFIG_ACR_APARK_UNSET + CONFIG_ACR_APARK | +#endif +#ifndef CONFIG_ACR_PARKM_UNSET + CONFIG_ACR_PARKM | +#endif + 0; diff --git a/arch/powerpc/cpu/mpc83xx/bats/Kconfig b/arch/powerpc/cpu/mpc83xx/bats/Kconfig new file mode 100644 index 0000000000..218920cfc9 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/bats/Kconfig @@ -0,0 +1,1311 @@ +menu "BATS setup" + +menuconfig BAT0 + bool "BAT0" + +if BAT0 + +config BAT0_NAME + string "Identifier" + +config BAT0_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT0_LENGTH_128_KBYTES + bool "128 kb" + +config BAT0_LENGTH_256_KBYTES + bool "256 kb" + +config BAT0_LENGTH_512_KBYTES + bool "512 kb" + +config BAT0_LENGTH_1_MBYTES + bool "1 mb" + +config BAT0_LENGTH_2_MBYTES + bool "2 mb" + +config BAT0_LENGTH_4_MBYTES + bool "4 mb" + +config BAT0_LENGTH_8_MBYTES + bool "8 mb" + +config BAT0_LENGTH_16_MBYTES + bool "16 mb" + +config BAT0_LENGTH_32_MBYTES + bool "32 mb" + +config BAT0_LENGTH_64_MBYTES + bool "64 mb" + +config BAT0_LENGTH_128_MBYTES + bool "128 mb" + +config BAT0_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT0_ACCESS_NONE + bool "No access" + +config BAT0_ACCESS_RO + bool "Read-only" + +config BAT0_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT0_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT0_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT0_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT0_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT0_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT0_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT0_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT0_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT0_USER_MODE_VALID + bool "User mode valid" + +config BAT0_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT0_LENGTH + hex + default 0x00000000 if BAT0_LENGTH_128_KBYTES + default 0x00000004 if BAT0_LENGTH_256_KBYTES + default 0x0000000c if BAT0_LENGTH_512_KBYTES + default 0x0000001c if BAT0_LENGTH_1_MBYTES + default 0x0000003c if BAT0_LENGTH_2_MBYTES + default 0x0000007c if BAT0_LENGTH_4_MBYTES + default 0x000000fc if BAT0_LENGTH_8_MBYTES + default 0x000001fc if BAT0_LENGTH_16_MBYTES + default 0x000003fc if BAT0_LENGTH_32_MBYTES + default 0x000007fc if BAT0_LENGTH_64_MBYTES + default 0x00000ffc if BAT0_LENGTH_128_MBYTES + default 0x00001ffc if BAT0_LENGTH_256_MBYTES + +config BAT0_PAGE_PROTECTION + hex + default 0x0 if BAT0_ACCESS_NONE + default 0x1 if BAT0_ACCESS_RO + default 0x2 if BAT0_ACCESS_RW + +config BAT0_WIMG_ICACHE + hex + default 0x0 if !BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x8 if !BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x10 if !BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x18 if !BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x20 if !BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x28 if !BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x30 if !BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x38 if !BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x40 if BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x48 if BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x50 if BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x58 if BAT0_ICACHE_WRITETHROUGH && !BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x60 if BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x68 if BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && !BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + default 0x70 if BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && !BAT0_ICACHE_GUARDED + default 0x78 if BAT0_ICACHE_WRITETHROUGH && BAT0_ICACHE_INHIBITED && BAT0_ICACHE_MEMORYCOHERENCE && BAT0_ICACHE_GUARDED + +config BAT0_WIMG_DCACHE + hex + default 0x0 if !BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x8 if !BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x10 if !BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x18 if !BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x20 if !BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x28 if !BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x30 if !BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x38 if !BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x40 if BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x48 if BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x50 if BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x58 if BAT0_DCACHE_WRITETHROUGH && !BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x60 if BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x68 if BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && !BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + default 0x70 if BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && !BAT0_DCACHE_GUARDED + default 0x78 if BAT0_DCACHE_WRITETHROUGH && BAT0_DCACHE_INHIBITED && BAT0_DCACHE_MEMORYCOHERENCE && BAT0_DCACHE_GUARDED + +config BAT0_VALID_BITS + hex + default 0x0 if !BAT0_SUPERVISOR_MODE_VALID && !BAT0_USER_MODE_VALID + default 0x1 if !BAT0_SUPERVISOR_MODE_VALID && BAT0_USER_MODE_VALID + default 0x2 if BAT0_SUPERVISOR_MODE_VALID && !BAT0_USER_MODE_VALID + default 0x3 if BAT0_SUPERVISOR_MODE_VALID && BAT0_USER_MODE_VALID + +menuconfig BAT1 + bool "BAT1" + +if BAT1 + +config BAT1_NAME + string "Identifier" + +config BAT1_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT1_LENGTH_128_KBYTES + bool "128 kb" + +config BAT1_LENGTH_256_KBYTES + bool "256 kb" + +config BAT1_LENGTH_512_KBYTES + bool "512 kb" + +config BAT1_LENGTH_1_MBYTES + bool "1 mb" + +config BAT1_LENGTH_2_MBYTES + bool "2 mb" + +config BAT1_LENGTH_4_MBYTES + bool "4 mb" + +config BAT1_LENGTH_8_MBYTES + bool "8 mb" + +config BAT1_LENGTH_16_MBYTES + bool "16 mb" + +config BAT1_LENGTH_32_MBYTES + bool "32 mb" + +config BAT1_LENGTH_64_MBYTES + bool "64 mb" + +config BAT1_LENGTH_128_MBYTES + bool "128 mb" + +config BAT1_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT1_ACCESS_NONE + bool "No access" + +config BAT1_ACCESS_RO + bool "Read-only" + +config BAT1_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT1_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT1_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT1_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT1_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT1_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT1_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT1_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT1_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT1_USER_MODE_VALID + bool "User mode valid" + +config BAT1_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT1_LENGTH + hex + default 0x00000000 if BAT1_LENGTH_128_KBYTES + default 0x00000004 if BAT1_LENGTH_256_KBYTES + default 0x0000000c if BAT1_LENGTH_512_KBYTES + default 0x0000001c if BAT1_LENGTH_1_MBYTES + default 0x0000003c if BAT1_LENGTH_2_MBYTES + default 0x0000007c if BAT1_LENGTH_4_MBYTES + default 0x000000fc if BAT1_LENGTH_8_MBYTES + default 0x000001fc if BAT1_LENGTH_16_MBYTES + default 0x000003fc if BAT1_LENGTH_32_MBYTES + default 0x000007fc if BAT1_LENGTH_64_MBYTES + default 0x00000ffc if BAT1_LENGTH_128_MBYTES + default 0x00001ffc if BAT1_LENGTH_256_MBYTES + +config BAT1_PAGE_PROTECTION + hex + default 0x0 if BAT1_ACCESS_NONE + default 0x1 if BAT1_ACCESS_RO + default 0x2 if BAT1_ACCESS_RW + +config BAT1_WIMG_ICACHE + hex + default 0x0 if !BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x8 if !BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x10 if !BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x18 if !BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x20 if !BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x28 if !BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x30 if !BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x38 if !BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x40 if BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x48 if BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x50 if BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x58 if BAT1_ICACHE_WRITETHROUGH && !BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x60 if BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x68 if BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && !BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + default 0x70 if BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && !BAT1_ICACHE_GUARDED + default 0x78 if BAT1_ICACHE_WRITETHROUGH && BAT1_ICACHE_INHIBITED && BAT1_ICACHE_MEMORYCOHERENCE && BAT1_ICACHE_GUARDED + +config BAT1_WIMG_DCACHE + hex + default 0x0 if !BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x8 if !BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x10 if !BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x18 if !BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x20 if !BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x28 if !BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x30 if !BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x38 if !BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x40 if BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x48 if BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x50 if BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x58 if BAT1_DCACHE_WRITETHROUGH && !BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x60 if BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x68 if BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && !BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + default 0x70 if BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && !BAT1_DCACHE_GUARDED + default 0x78 if BAT1_DCACHE_WRITETHROUGH && BAT1_DCACHE_INHIBITED && BAT1_DCACHE_MEMORYCOHERENCE && BAT1_DCACHE_GUARDED + +config BAT1_VALID_BITS + hex + default 0x0 if !BAT1_SUPERVISOR_MODE_VALID && !BAT1_USER_MODE_VALID + default 0x1 if !BAT1_SUPERVISOR_MODE_VALID && BAT1_USER_MODE_VALID + default 0x2 if BAT1_SUPERVISOR_MODE_VALID && !BAT1_USER_MODE_VALID + default 0x3 if BAT1_SUPERVISOR_MODE_VALID && BAT1_USER_MODE_VALID + +menuconfig BAT2 + bool "BAT2" + +if BAT2 + +config BAT2_NAME + string "Identifier" + +config BAT2_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT2_LENGTH_128_KBYTES + bool "128 kb" + +config BAT2_LENGTH_256_KBYTES + bool "256 kb" + +config BAT2_LENGTH_512_KBYTES + bool "512 kb" + +config BAT2_LENGTH_1_MBYTES + bool "1 mb" + +config BAT2_LENGTH_2_MBYTES + bool "2 mb" + +config BAT2_LENGTH_4_MBYTES + bool "4 mb" + +config BAT2_LENGTH_8_MBYTES + bool "8 mb" + +config BAT2_LENGTH_16_MBYTES + bool "16 mb" + +config BAT2_LENGTH_32_MBYTES + bool "32 mb" + +config BAT2_LENGTH_64_MBYTES + bool "64 mb" + +config BAT2_LENGTH_128_MBYTES + bool "128 mb" + +config BAT2_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT2_ACCESS_NONE + bool "No access" + +config BAT2_ACCESS_RO + bool "Read-only" + +config BAT2_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT2_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT2_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT2_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT2_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT2_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT2_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT2_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT2_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT2_USER_MODE_VALID + bool "User mode valid" + +config BAT2_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT2_LENGTH + hex + default 0x00000000 if BAT2_LENGTH_128_KBYTES + default 0x00000004 if BAT2_LENGTH_256_KBYTES + default 0x0000000c if BAT2_LENGTH_512_KBYTES + default 0x0000001c if BAT2_LENGTH_1_MBYTES + default 0x0000003c if BAT2_LENGTH_2_MBYTES + default 0x0000007c if BAT2_LENGTH_4_MBYTES + default 0x000000fc if BAT2_LENGTH_8_MBYTES + default 0x000001fc if BAT2_LENGTH_16_MBYTES + default 0x000003fc if BAT2_LENGTH_32_MBYTES + default 0x000007fc if BAT2_LENGTH_64_MBYTES + default 0x00000ffc if BAT2_LENGTH_128_MBYTES + default 0x00001ffc if BAT2_LENGTH_256_MBYTES + +config BAT2_PAGE_PROTECTION + hex + default 0x0 if BAT2_ACCESS_NONE + default 0x1 if BAT2_ACCESS_RO + default 0x2 if BAT2_ACCESS_RW + +config BAT2_WIMG_ICACHE + hex + default 0x0 if !BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x8 if !BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x10 if !BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x18 if !BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x20 if !BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x28 if !BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x30 if !BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x38 if !BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x40 if BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x48 if BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x50 if BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x58 if BAT2_ICACHE_WRITETHROUGH && !BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x60 if BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x68 if BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && !BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + default 0x70 if BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && !BAT2_ICACHE_GUARDED + default 0x78 if BAT2_ICACHE_WRITETHROUGH && BAT2_ICACHE_INHIBITED && BAT2_ICACHE_MEMORYCOHERENCE && BAT2_ICACHE_GUARDED + +config BAT2_WIMG_DCACHE + hex + default 0x0 if !BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x8 if !BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x10 if !BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x18 if !BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x20 if !BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x28 if !BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x30 if !BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x38 if !BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x40 if BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x48 if BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x50 if BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x58 if BAT2_DCACHE_WRITETHROUGH && !BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x60 if BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x68 if BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && !BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + default 0x70 if BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && !BAT2_DCACHE_GUARDED + default 0x78 if BAT2_DCACHE_WRITETHROUGH && BAT2_DCACHE_INHIBITED && BAT2_DCACHE_MEMORYCOHERENCE && BAT2_DCACHE_GUARDED + +config BAT2_VALID_BITS + hex + default 0x0 if !BAT2_SUPERVISOR_MODE_VALID && !BAT2_USER_MODE_VALID + default 0x1 if !BAT2_SUPERVISOR_MODE_VALID && BAT2_USER_MODE_VALID + default 0x2 if BAT2_SUPERVISOR_MODE_VALID && !BAT2_USER_MODE_VALID + default 0x3 if BAT2_SUPERVISOR_MODE_VALID && BAT2_USER_MODE_VALID + +menuconfig BAT3 + bool "BAT3" + +if BAT3 + +config BAT3_NAME + string "Identifier" + +config BAT3_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT3_LENGTH_128_KBYTES + bool "128 kb" + +config BAT3_LENGTH_256_KBYTES + bool "256 kb" + +config BAT3_LENGTH_512_KBYTES + bool "512 kb" + +config BAT3_LENGTH_1_MBYTES + bool "1 mb" + +config BAT3_LENGTH_2_MBYTES + bool "2 mb" + +config BAT3_LENGTH_4_MBYTES + bool "4 mb" + +config BAT3_LENGTH_8_MBYTES + bool "8 mb" + +config BAT3_LENGTH_16_MBYTES + bool "16 mb" + +config BAT3_LENGTH_32_MBYTES + bool "32 mb" + +config BAT3_LENGTH_64_MBYTES + bool "64 mb" + +config BAT3_LENGTH_128_MBYTES + bool "128 mb" + +config BAT3_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT3_ACCESS_NONE + bool "No access" + +config BAT3_ACCESS_RO + bool "Read-only" + +config BAT3_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT3_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT3_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT3_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT3_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT3_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT3_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT3_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT3_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT3_USER_MODE_VALID + bool "User mode valid" + +config BAT3_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT3_LENGTH + hex + default 0x00000000 if BAT3_LENGTH_128_KBYTES + default 0x00000004 if BAT3_LENGTH_256_KBYTES + default 0x0000000c if BAT3_LENGTH_512_KBYTES + default 0x0000001c if BAT3_LENGTH_1_MBYTES + default 0x0000003c if BAT3_LENGTH_2_MBYTES + default 0x0000007c if BAT3_LENGTH_4_MBYTES + default 0x000000fc if BAT3_LENGTH_8_MBYTES + default 0x000001fc if BAT3_LENGTH_16_MBYTES + default 0x000003fc if BAT3_LENGTH_32_MBYTES + default 0x000007fc if BAT3_LENGTH_64_MBYTES + default 0x00000ffc if BAT3_LENGTH_128_MBYTES + default 0x00001ffc if BAT3_LENGTH_256_MBYTES + +config BAT3_PAGE_PROTECTION + hex + default 0x0 if BAT3_ACCESS_NONE + default 0x1 if BAT3_ACCESS_RO + default 0x2 if BAT3_ACCESS_RW + +config BAT3_WIMG_ICACHE + hex + default 0x0 if !BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x8 if !BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x10 if !BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x18 if !BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x20 if !BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x28 if !BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x30 if !BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x38 if !BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x40 if BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x48 if BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x50 if BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x58 if BAT3_ICACHE_WRITETHROUGH && !BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x60 if BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x68 if BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && !BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + default 0x70 if BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && !BAT3_ICACHE_GUARDED + default 0x78 if BAT3_ICACHE_WRITETHROUGH && BAT3_ICACHE_INHIBITED && BAT3_ICACHE_MEMORYCOHERENCE && BAT3_ICACHE_GUARDED + +config BAT3_WIMG_DCACHE + hex + default 0x0 if !BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x8 if !BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x10 if !BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x18 if !BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x20 if !BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x28 if !BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x30 if !BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x38 if !BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x40 if BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x48 if BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x50 if BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x58 if BAT3_DCACHE_WRITETHROUGH && !BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x60 if BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x68 if BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && !BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + default 0x70 if BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && !BAT3_DCACHE_GUARDED + default 0x78 if BAT3_DCACHE_WRITETHROUGH && BAT3_DCACHE_INHIBITED && BAT3_DCACHE_MEMORYCOHERENCE && BAT3_DCACHE_GUARDED + +config BAT3_VALID_BITS + hex + default 0x0 if !BAT3_SUPERVISOR_MODE_VALID && !BAT3_USER_MODE_VALID + default 0x1 if !BAT3_SUPERVISOR_MODE_VALID && BAT3_USER_MODE_VALID + default 0x2 if BAT3_SUPERVISOR_MODE_VALID && !BAT3_USER_MODE_VALID + default 0x3 if BAT3_SUPERVISOR_MODE_VALID && BAT3_USER_MODE_VALID + +if HIGH_BATS + +menuconfig BAT4 + bool "BAT4" + +if BAT4 + +config BAT4_NAME + string "Identifier" + +config BAT4_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT4_LENGTH_128_KBYTES + bool "128 kb" + +config BAT4_LENGTH_256_KBYTES + bool "256 kb" + +config BAT4_LENGTH_512_KBYTES + bool "512 kb" + +config BAT4_LENGTH_1_MBYTES + bool "1 mb" + +config BAT4_LENGTH_2_MBYTES + bool "2 mb" + +config BAT4_LENGTH_4_MBYTES + bool "4 mb" + +config BAT4_LENGTH_8_MBYTES + bool "8 mb" + +config BAT4_LENGTH_16_MBYTES + bool "16 mb" + +config BAT4_LENGTH_32_MBYTES + bool "32 mb" + +config BAT4_LENGTH_64_MBYTES + bool "64 mb" + +config BAT4_LENGTH_128_MBYTES + bool "128 mb" + +config BAT4_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT4_ACCESS_NONE + bool "No access" + +config BAT4_ACCESS_RO + bool "Read-only" + +config BAT4_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT4_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT4_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT4_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT4_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT4_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT4_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT4_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT4_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT4_USER_MODE_VALID + bool "User mode valid" + +config BAT4_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT4_LENGTH + hex + default 0x00000000 if BAT4_LENGTH_128_KBYTES + default 0x00000004 if BAT4_LENGTH_256_KBYTES + default 0x0000000c if BAT4_LENGTH_512_KBYTES + default 0x0000001c if BAT4_LENGTH_1_MBYTES + default 0x0000003c if BAT4_LENGTH_2_MBYTES + default 0x0000007c if BAT4_LENGTH_4_MBYTES + default 0x000000fc if BAT4_LENGTH_8_MBYTES + default 0x000001fc if BAT4_LENGTH_16_MBYTES + default 0x000003fc if BAT4_LENGTH_32_MBYTES + default 0x000007fc if BAT4_LENGTH_64_MBYTES + default 0x00000ffc if BAT4_LENGTH_128_MBYTES + default 0x00001ffc if BAT4_LENGTH_256_MBYTES + +config BAT4_PAGE_PROTECTION + hex + default 0x0 if BAT4_ACCESS_NONE + default 0x1 if BAT4_ACCESS_RO + default 0x2 if BAT4_ACCESS_RW + +config BAT4_WIMG_ICACHE + hex + default 0x0 if !BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x8 if !BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x10 if !BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x18 if !BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x20 if !BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x28 if !BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x30 if !BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x38 if !BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x40 if BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x48 if BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x50 if BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x58 if BAT4_ICACHE_WRITETHROUGH && !BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x60 if BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x68 if BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && !BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + default 0x70 if BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && !BAT4_ICACHE_GUARDED + default 0x78 if BAT4_ICACHE_WRITETHROUGH && BAT4_ICACHE_INHIBITED && BAT4_ICACHE_MEMORYCOHERENCE && BAT4_ICACHE_GUARDED + +config BAT4_WIMG_DCACHE + hex + default 0x0 if !BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x8 if !BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x10 if !BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x18 if !BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x20 if !BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x28 if !BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x30 if !BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x38 if !BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x40 if BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x48 if BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x50 if BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x58 if BAT4_DCACHE_WRITETHROUGH && !BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x60 if BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x68 if BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && !BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + default 0x70 if BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && !BAT4_DCACHE_GUARDED + default 0x78 if BAT4_DCACHE_WRITETHROUGH && BAT4_DCACHE_INHIBITED && BAT4_DCACHE_MEMORYCOHERENCE && BAT4_DCACHE_GUARDED + +config BAT4_VALID_BITS + hex + default 0x0 if !BAT4_SUPERVISOR_MODE_VALID && !BAT4_USER_MODE_VALID + default 0x1 if !BAT4_SUPERVISOR_MODE_VALID && BAT4_USER_MODE_VALID + default 0x2 if BAT4_SUPERVISOR_MODE_VALID && !BAT4_USER_MODE_VALID + default 0x3 if BAT4_SUPERVISOR_MODE_VALID && BAT4_USER_MODE_VALID + +menuconfig BAT5 + bool "BAT5" + +if BAT5 + +config BAT5_NAME + string "Identifier" + +config BAT5_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT5_LENGTH_128_KBYTES + bool "128 kb" + +config BAT5_LENGTH_256_KBYTES + bool "256 kb" + +config BAT5_LENGTH_512_KBYTES + bool "512 kb" + +config BAT5_LENGTH_1_MBYTES + bool "1 mb" + +config BAT5_LENGTH_2_MBYTES + bool "2 mb" + +config BAT5_LENGTH_4_MBYTES + bool "4 mb" + +config BAT5_LENGTH_8_MBYTES + bool "8 mb" + +config BAT5_LENGTH_16_MBYTES + bool "16 mb" + +config BAT5_LENGTH_32_MBYTES + bool "32 mb" + +config BAT5_LENGTH_64_MBYTES + bool "64 mb" + +config BAT5_LENGTH_128_MBYTES + bool "128 mb" + +config BAT5_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT5_ACCESS_NONE + bool "No access" + +config BAT5_ACCESS_RO + bool "Read-only" + +config BAT5_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT5_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT5_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT5_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT5_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT5_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT5_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT5_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT5_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT5_USER_MODE_VALID + bool "User mode valid" + +config BAT5_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT5_LENGTH + hex + default 0x00000000 if BAT5_LENGTH_128_KBYTES + default 0x00000004 if BAT5_LENGTH_256_KBYTES + default 0x0000000c if BAT5_LENGTH_512_KBYTES + default 0x0000001c if BAT5_LENGTH_1_MBYTES + default 0x0000003c if BAT5_LENGTH_2_MBYTES + default 0x0000007c if BAT5_LENGTH_4_MBYTES + default 0x000000fc if BAT5_LENGTH_8_MBYTES + default 0x000001fc if BAT5_LENGTH_16_MBYTES + default 0x000003fc if BAT5_LENGTH_32_MBYTES + default 0x000007fc if BAT5_LENGTH_64_MBYTES + default 0x00000ffc if BAT5_LENGTH_128_MBYTES + default 0x00001ffc if BAT5_LENGTH_256_MBYTES + +config BAT5_PAGE_PROTECTION + hex + default 0x0 if BAT5_ACCESS_NONE + default 0x1 if BAT5_ACCESS_RO + default 0x2 if BAT5_ACCESS_RW + +config BAT5_WIMG_ICACHE + hex + default 0x0 if !BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x8 if !BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x10 if !BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x18 if !BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x20 if !BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x28 if !BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x30 if !BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x38 if !BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x40 if BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x48 if BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x50 if BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x58 if BAT5_ICACHE_WRITETHROUGH && !BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x60 if BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x68 if BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && !BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + default 0x70 if BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && !BAT5_ICACHE_GUARDED + default 0x78 if BAT5_ICACHE_WRITETHROUGH && BAT5_ICACHE_INHIBITED && BAT5_ICACHE_MEMORYCOHERENCE && BAT5_ICACHE_GUARDED + +config BAT5_WIMG_DCACHE + hex + default 0x0 if !BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x8 if !BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x10 if !BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x18 if !BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x20 if !BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x28 if !BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x30 if !BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x38 if !BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x40 if BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x48 if BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x50 if BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x58 if BAT5_DCACHE_WRITETHROUGH && !BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x60 if BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x68 if BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && !BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + default 0x70 if BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && !BAT5_DCACHE_GUARDED + default 0x78 if BAT5_DCACHE_WRITETHROUGH && BAT5_DCACHE_INHIBITED && BAT5_DCACHE_MEMORYCOHERENCE && BAT5_DCACHE_GUARDED + +config BAT5_VALID_BITS + hex + default 0x0 if !BAT5_SUPERVISOR_MODE_VALID && !BAT5_USER_MODE_VALID + default 0x1 if !BAT5_SUPERVISOR_MODE_VALID && BAT5_USER_MODE_VALID + default 0x2 if BAT5_SUPERVISOR_MODE_VALID && !BAT5_USER_MODE_VALID + default 0x3 if BAT5_SUPERVISOR_MODE_VALID && BAT5_USER_MODE_VALID + +menuconfig BAT6 + bool "BAT6" + +if BAT6 + +config BAT6_NAME + string "Identifier" + +config BAT6_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT6_LENGTH_128_KBYTES + bool "128 kb" + +config BAT6_LENGTH_256_KBYTES + bool "256 kb" + +config BAT6_LENGTH_512_KBYTES + bool "512 kb" + +config BAT6_LENGTH_1_MBYTES + bool "1 mb" + +config BAT6_LENGTH_2_MBYTES + bool "2 mb" + +config BAT6_LENGTH_4_MBYTES + bool "4 mb" + +config BAT6_LENGTH_8_MBYTES + bool "8 mb" + +config BAT6_LENGTH_16_MBYTES + bool "16 mb" + +config BAT6_LENGTH_32_MBYTES + bool "32 mb" + +config BAT6_LENGTH_64_MBYTES + bool "64 mb" + +config BAT6_LENGTH_128_MBYTES + bool "128 mb" + +config BAT6_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT6_ACCESS_NONE + bool "No access" + +config BAT6_ACCESS_RO + bool "Read-only" + +config BAT6_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT6_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT6_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT6_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT6_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT6_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT6_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT6_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT6_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT6_USER_MODE_VALID + bool "User mode valid" + +config BAT6_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT6_LENGTH + hex + default 0x00000000 if BAT6_LENGTH_128_KBYTES + default 0x00000004 if BAT6_LENGTH_256_KBYTES + default 0x0000000c if BAT6_LENGTH_512_KBYTES + default 0x0000001c if BAT6_LENGTH_1_MBYTES + default 0x0000003c if BAT6_LENGTH_2_MBYTES + default 0x0000007c if BAT6_LENGTH_4_MBYTES + default 0x000000fc if BAT6_LENGTH_8_MBYTES + default 0x000001fc if BAT6_LENGTH_16_MBYTES + default 0x000003fc if BAT6_LENGTH_32_MBYTES + default 0x000007fc if BAT6_LENGTH_64_MBYTES + default 0x00000ffc if BAT6_LENGTH_128_MBYTES + default 0x00001ffc if BAT6_LENGTH_256_MBYTES + +config BAT6_PAGE_PROTECTION + hex + default 0x0 if BAT6_ACCESS_NONE + default 0x1 if BAT6_ACCESS_RO + default 0x2 if BAT6_ACCESS_RW + +config BAT6_WIMG_ICACHE + hex + default 0x0 if !BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x8 if !BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x10 if !BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x18 if !BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x20 if !BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x28 if !BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x30 if !BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x38 if !BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x40 if BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x48 if BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x50 if BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x58 if BAT6_ICACHE_WRITETHROUGH && !BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x60 if BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x68 if BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && !BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + default 0x70 if BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && !BAT6_ICACHE_GUARDED + default 0x78 if BAT6_ICACHE_WRITETHROUGH && BAT6_ICACHE_INHIBITED && BAT6_ICACHE_MEMORYCOHERENCE && BAT6_ICACHE_GUARDED + +config BAT6_WIMG_DCACHE + hex + default 0x0 if !BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x8 if !BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x10 if !BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x18 if !BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x20 if !BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x28 if !BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x30 if !BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x38 if !BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x40 if BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x48 if BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x50 if BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x58 if BAT6_DCACHE_WRITETHROUGH && !BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x60 if BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x68 if BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && !BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + default 0x70 if BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && !BAT6_DCACHE_GUARDED + default 0x78 if BAT6_DCACHE_WRITETHROUGH && BAT6_DCACHE_INHIBITED && BAT6_DCACHE_MEMORYCOHERENCE && BAT6_DCACHE_GUARDED + +config BAT6_VALID_BITS + hex + default 0x0 if !BAT6_SUPERVISOR_MODE_VALID && !BAT6_USER_MODE_VALID + default 0x1 if !BAT6_SUPERVISOR_MODE_VALID && BAT6_USER_MODE_VALID + default 0x2 if BAT6_SUPERVISOR_MODE_VALID && !BAT6_USER_MODE_VALID + default 0x3 if BAT6_SUPERVISOR_MODE_VALID && BAT6_USER_MODE_VALID + +menuconfig BAT7 + bool "BAT7" + +if BAT7 + +config BAT7_NAME + string "Identifier" + +config BAT7_BASE + hex "Base" + +choice + prompt "Block length" + +config BAT7_LENGTH_128_KBYTES + bool "128 kb" + +config BAT7_LENGTH_256_KBYTES + bool "256 kb" + +config BAT7_LENGTH_512_KBYTES + bool "512 kb" + +config BAT7_LENGTH_1_MBYTES + bool "1 mb" + +config BAT7_LENGTH_2_MBYTES + bool "2 mb" + +config BAT7_LENGTH_4_MBYTES + bool "4 mb" + +config BAT7_LENGTH_8_MBYTES + bool "8 mb" + +config BAT7_LENGTH_16_MBYTES + bool "16 mb" + +config BAT7_LENGTH_32_MBYTES + bool "32 mb" + +config BAT7_LENGTH_64_MBYTES + bool "64 mb" + +config BAT7_LENGTH_128_MBYTES + bool "128 mb" + +config BAT7_LENGTH_256_MBYTES + bool "256 mb" +endchoice + +choice + prompt "Protection mode" + +config BAT7_ACCESS_NONE + bool "No access" + +config BAT7_ACCESS_RO + bool "Read-only" + +config BAT7_ACCESS_RW + bool "Read-write" + +endchoice + +config BAT7_ICACHE_WRITETHROUGH + bool "I-cache Write-through" + +config BAT7_ICACHE_INHIBITED + bool "I-cache Inhibited" + +config BAT7_ICACHE_MEMORYCOHERENCE + bool "I-cache Memory coherence" + +config BAT7_ICACHE_GUARDED + bool "I-cache Guarded" + +config BAT7_DCACHE_WRITETHROUGH + bool "D-cache Write-through" + +config BAT7_DCACHE_INHIBITED + bool "D-cache Inhibited" + +config BAT7_DCACHE_MEMORYCOHERENCE + bool "D-cache Memory coherence" + +config BAT7_DCACHE_GUARDED + bool "D-cache Guarded" + +config BAT7_USER_MODE_VALID + bool "User mode valid" + +config BAT7_SUPERVISOR_MODE_VALID + bool "Supervisor mode valid" + +endif + +config BAT7_LENGTH + hex + default 0x00000000 if BAT7_LENGTH_128_KBYTES + default 0x00000004 if BAT7_LENGTH_256_KBYTES + default 0x0000000c if BAT7_LENGTH_512_KBYTES + default 0x0000001c if BAT7_LENGTH_1_MBYTES + default 0x0000003c if BAT7_LENGTH_2_MBYTES + default 0x0000007c if BAT7_LENGTH_4_MBYTES + default 0x000000fc if BAT7_LENGTH_8_MBYTES + default 0x000001fc if BAT7_LENGTH_16_MBYTES + default 0x000003fc if BAT7_LENGTH_32_MBYTES + default 0x000007fc if BAT7_LENGTH_64_MBYTES + default 0x00000ffc if BAT7_LENGTH_128_MBYTES + default 0x00001ffc if BAT7_LENGTH_256_MBYTES + +config BAT7_PAGE_PROTECTION + hex + default 0x0 if BAT7_ACCESS_NONE + default 0x1 if BAT7_ACCESS_RO + default 0x2 if BAT7_ACCESS_RW + +config BAT7_WIMG_ICACHE + hex + default 0x0 if !BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x8 if !BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x10 if !BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x18 if !BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x20 if !BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x28 if !BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x30 if !BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x38 if !BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x40 if BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x48 if BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x50 if BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x58 if BAT7_ICACHE_WRITETHROUGH && !BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x60 if BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x68 if BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && !BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + default 0x70 if BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && !BAT7_ICACHE_GUARDED + default 0x78 if BAT7_ICACHE_WRITETHROUGH && BAT7_ICACHE_INHIBITED && BAT7_ICACHE_MEMORYCOHERENCE && BAT7_ICACHE_GUARDED + +config BAT7_WIMG_DCACHE + hex + default 0x0 if !BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x8 if !BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x10 if !BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x18 if !BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x20 if !BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x28 if !BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x30 if !BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x38 if !BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x40 if BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x48 if BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x50 if BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x58 if BAT7_DCACHE_WRITETHROUGH && !BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x60 if BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x68 if BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && !BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + default 0x70 if BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && !BAT7_DCACHE_GUARDED + default 0x78 if BAT7_DCACHE_WRITETHROUGH && BAT7_DCACHE_INHIBITED && BAT7_DCACHE_MEMORYCOHERENCE && BAT7_DCACHE_GUARDED + +config BAT7_VALID_BITS + hex + default 0x0 if !BAT7_SUPERVISOR_MODE_VALID && !BAT7_USER_MODE_VALID + default 0x1 if !BAT7_SUPERVISOR_MODE_VALID && BAT7_USER_MODE_VALID + default 0x2 if BAT7_SUPERVISOR_MODE_VALID && !BAT7_USER_MODE_VALID + default 0x3 if BAT7_SUPERVISOR_MODE_VALID && BAT7_USER_MODE_VALID + +endif + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/bats/bats.h b/arch/powerpc/cpu/mpc83xx/bats/bats.h new file mode 100644 index 0000000000..f0754c2351 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/bats/bats.h @@ -0,0 +1,223 @@ +#ifdef CONFIG_BAT0 +#define CONFIG_SYS_IBAT0L (\ + (CONFIG_BAT0_BASE) |\ + (CONFIG_BAT0_PAGE_PROTECTION) |\ + (CONFIG_BAT0_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT0U (\ + (CONFIG_BAT0_BASE) |\ + (CONFIG_BAT0_LENGTH) |\ + (CONFIG_BAT0_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT0L (\ + (CONFIG_BAT0_BASE) |\ + (CONFIG_BAT0_PAGE_PROTECTION) |\ + (CONFIG_BAT0_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT0U (\ + (CONFIG_BAT0_BASE) |\ + (CONFIG_BAT0_LENGTH) |\ + (CONFIG_BAT0_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT0L (0) +#define CONFIG_SYS_IBAT0U (0) +#define CONFIG_SYS_DBAT0L (0) +#define CONFIG_SYS_DBAT0U (0) +#endif /* CONFIG_BAT0 */ + +#ifdef CONFIG_BAT1 +#define CONFIG_SYS_IBAT1L (\ + (CONFIG_BAT1_BASE) |\ + (CONFIG_BAT1_PAGE_PROTECTION) |\ + (CONFIG_BAT1_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT1U (\ + (CONFIG_BAT1_BASE) |\ + (CONFIG_BAT1_LENGTH) |\ + (CONFIG_BAT1_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT1L (\ + (CONFIG_BAT1_BASE) |\ + (CONFIG_BAT1_PAGE_PROTECTION) |\ + (CONFIG_BAT1_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT1U (\ + (CONFIG_BAT1_BASE) |\ + (CONFIG_BAT1_LENGTH) |\ + (CONFIG_BAT1_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT1L (0) +#define CONFIG_SYS_IBAT1U (0) +#define CONFIG_SYS_DBAT1L (0) +#define CONFIG_SYS_DBAT1U (0) +#endif /* CONFIG_BAT1 */ + +#ifdef CONFIG_BAT2 +#define CONFIG_SYS_IBAT2L (\ + (CONFIG_BAT2_BASE) |\ + (CONFIG_BAT2_PAGE_PROTECTION) |\ + (CONFIG_BAT2_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT2U (\ + (CONFIG_BAT2_BASE) |\ + (CONFIG_BAT2_LENGTH) |\ + (CONFIG_BAT2_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT2L (\ + (CONFIG_BAT2_BASE) |\ + (CONFIG_BAT2_PAGE_PROTECTION) |\ + (CONFIG_BAT2_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT2U (\ + (CONFIG_BAT2_BASE) |\ + (CONFIG_BAT2_LENGTH) |\ + (CONFIG_BAT2_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT2L (0) +#define CONFIG_SYS_IBAT2U (0) +#define CONFIG_SYS_DBAT2L (0) +#define CONFIG_SYS_DBAT2U (0) +#endif /* CONFIG_BAT2 */ + +#ifdef CONFIG_BAT3 +#define CONFIG_SYS_IBAT3L (\ + (CONFIG_BAT3_BASE) |\ + (CONFIG_BAT3_PAGE_PROTECTION) |\ + (CONFIG_BAT3_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT3U (\ + (CONFIG_BAT3_BASE) |\ + (CONFIG_BAT3_LENGTH) |\ + (CONFIG_BAT3_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT3L (\ + (CONFIG_BAT3_BASE) |\ + (CONFIG_BAT3_PAGE_PROTECTION) |\ + (CONFIG_BAT3_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT3U (\ + (CONFIG_BAT3_BASE) |\ + (CONFIG_BAT3_LENGTH) |\ + (CONFIG_BAT3_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT3L (0) +#define CONFIG_SYS_IBAT3U (0) +#define CONFIG_SYS_DBAT3L (0) +#define CONFIG_SYS_DBAT3U (0) +#endif /* CONFIG_BAT3 */ + +#ifdef CONFIG_BAT4 +#define CONFIG_SYS_IBAT4L (\ + (CONFIG_BAT4_BASE) |\ + (CONFIG_BAT4_PAGE_PROTECTION) |\ + (CONFIG_BAT4_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT4U (\ + (CONFIG_BAT4_BASE) |\ + (CONFIG_BAT4_LENGTH) |\ + (CONFIG_BAT4_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT4L (\ + (CONFIG_BAT4_BASE) |\ + (CONFIG_BAT4_PAGE_PROTECTION) |\ + (CONFIG_BAT4_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT4U (\ + (CONFIG_BAT4_BASE) |\ + (CONFIG_BAT4_LENGTH) |\ + (CONFIG_BAT4_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT4L (0) +#define CONFIG_SYS_IBAT4U (0) +#define CONFIG_SYS_DBAT4L (0) +#define CONFIG_SYS_DBAT4U (0) +#endif /* CONFIG_BAT4 */ + +#ifdef CONFIG_BAT5 +#define CONFIG_SYS_IBAT5L (\ + (CONFIG_BAT5_BASE) |\ + (CONFIG_BAT5_PAGE_PROTECTION) |\ + (CONFIG_BAT5_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT5U (\ + (CONFIG_BAT5_BASE) |\ + (CONFIG_BAT5_LENGTH) |\ + (CONFIG_BAT5_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT5L (\ + (CONFIG_BAT5_BASE) |\ + (CONFIG_BAT5_PAGE_PROTECTION) |\ + (CONFIG_BAT5_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT5U (\ + (CONFIG_BAT5_BASE) |\ + (CONFIG_BAT5_LENGTH) |\ + (CONFIG_BAT5_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT5L (0) +#define CONFIG_SYS_IBAT5U (0) +#define CONFIG_SYS_DBAT5L (0) +#define CONFIG_SYS_DBAT5U (0) +#endif /* CONFIG_BAT5 */ + +#ifdef CONFIG_BAT6 +#define CONFIG_SYS_IBAT6L (\ + (CONFIG_BAT6_BASE) |\ + (CONFIG_BAT6_PAGE_PROTECTION) |\ + (CONFIG_BAT6_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT6U (\ + (CONFIG_BAT6_BASE) |\ + (CONFIG_BAT6_LENGTH) |\ + (CONFIG_BAT6_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT6L (\ + (CONFIG_BAT6_BASE) |\ + (CONFIG_BAT6_PAGE_PROTECTION) |\ + (CONFIG_BAT6_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT6U (\ + (CONFIG_BAT6_BASE) |\ + (CONFIG_BAT6_LENGTH) |\ + (CONFIG_BAT6_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT6L (0) +#define CONFIG_SYS_IBAT6U (0) +#define CONFIG_SYS_DBAT6L (0) +#define CONFIG_SYS_DBAT6U (0) +#endif /* CONFIG_BAT6 */ + +#ifdef CONFIG_BAT7 +#define CONFIG_SYS_IBAT7L (\ + (CONFIG_BAT7_BASE) |\ + (CONFIG_BAT7_PAGE_PROTECTION) |\ + (CONFIG_BAT7_WIMG_ICACHE) \ + ) +#define CONFIG_SYS_IBAT7U (\ + (CONFIG_BAT7_BASE) |\ + (CONFIG_BAT7_LENGTH) |\ + (CONFIG_BAT7_VALID_BITS) \ + ) +#define CONFIG_SYS_DBAT7L (\ + (CONFIG_BAT7_BASE) |\ + (CONFIG_BAT7_PAGE_PROTECTION) |\ + (CONFIG_BAT7_WIMG_DCACHE) \ + ) +#define CONFIG_SYS_DBAT7U (\ + (CONFIG_BAT7_BASE) |\ + (CONFIG_BAT7_LENGTH) |\ + (CONFIG_BAT7_VALID_BITS) \ + ) +#else +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L (0) +#define CONFIG_SYS_DBAT7U (0) +#endif /* CONFIG_BAT7 */ diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index b29f271e9b..3048ecf34a 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -18,7 +18,7 @@ #include <tsec.h> #include <netdev.h> #include <fsl_esdhc.h> -#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x) +#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_ARCH_MPC831X) #include <linux/immap_qe.h> #include <asm/io.h> #endif @@ -133,18 +133,18 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #ifdef MPC83xx_RESET /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~( MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); + msr = mfmsr(); + msr &= ~(MSR_EE | MSR_IR | MSR_DR); + mtmsr(msr); /* enable Reset Control Reg */ immap->reset.rpr = 0x52535445; - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); + sync(); + isync(); /* confirm Reset Control Reg is enabled */ - while(!((immap->reset.rcer) & RCER_CRE)); + while(!((immap->reset.rcer) & RCER_CRE)) + ; udelay(200); @@ -156,10 +156,9 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */ /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - + msr = mfmsr(); msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); + mtmsr(msr); /* * Trying to execute the next instruction at a non-existing address @@ -199,6 +198,7 @@ void watchdog_reset (void) } #endif +#ifndef CONFIG_DM_ETH /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() @@ -214,6 +214,7 @@ int cpu_eth_init(bd_t *bis) #endif return 0; } +#endif /* !CONFIG_DM_ETH */ /* * Initializes on-chip MMC controllers. @@ -227,3 +228,21 @@ int cpu_mmc_init(bd_t *bis) return 0; #endif } + +void ppcDWstore(unsigned int *addr, unsigned int *value) +{ + asm("lfd 1, 0(%1)\n\t" + "stfd 1, 0(%0)" + : + : "r" (addr), "r" (value) + : "memory"); +} + +void ppcDWload(unsigned int *addr, unsigned int *ret) +{ + asm("lfd 1, 0(%0)\n\t" + "stfd 1, 0(%1)" + : + : "r" (addr), "r" (ret) + : "memory"); +} diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 1555205e06..af8facad53 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -12,6 +12,12 @@ #include <usb/ehci-ci.h> #endif +#include "lblaw/lblaw.h" +#include "elbc/elbc.h" +#include "sysio/sysio.h" +#include "arbiter/arbiter.h" +#include "initreg/initreg.h" + DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_QE @@ -47,62 +53,6 @@ static void config_qe_ioports(void) */ void cpu_init_f (volatile immap_t * im) { - __be32 acr_mask = -#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ - ACR_PIPE_DEP | -#endif -#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ - ACR_RPTCNT | -#endif -#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ - ACR_APARK | -#endif -#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ - ACR_PARKM | -#endif - 0; - __be32 acr_val = -#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) | -#endif -#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) | -#endif -#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */ - (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) | -#endif -#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */ - (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) | -#endif - 0; - __be32 spcr_mask = -#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */ - SPCR_OPT | -#endif -#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ - SPCR_TSECEP | -#endif -#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ - SPCR_TSEC1EP | -#endif -#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ - SPCR_TSEC2EP | -#endif - 0; - __be32 spcr_val = -#ifdef CONFIG_SYS_SPCR_OPT - (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) | -#endif -#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */ - (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) | -#endif -#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */ - (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) | -#endif -#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */ - (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) | -#endif - 0; __be32 sccr_mask = #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */ SCCR_ENCCM | @@ -179,28 +129,6 @@ void cpu_init_f (volatile immap_t * im) (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | #endif 0; - __be32 lcrr_mask = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */ - LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - LCRR_CLKDIV | -#endif - 0; - __be32 lcrr_val = -#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */ - CONFIG_SYS_LCRR_DBYP | -#endif -#ifdef CONFIG_SYS_LCRR_EADC - CONFIG_SYS_LCRR_EADC | -#endif -#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */ - CONFIG_SYS_LCRR_CLKDIV | -#endif - 0; /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); @@ -240,7 +168,7 @@ void cpu_init_f (volatile immap_t * im) /* System General Purpose Register */ #ifdef CONFIG_SYS_SICRH -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313) +#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8313) /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, &im->sysconf.sicrh); @@ -312,7 +240,7 @@ void cpu_init_f (volatile immap_t * im) im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; #endif -#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x) +#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_ARCH_MPC831X) uint32_t temp; struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index 73f0be2a30..10e9b96add 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -191,8 +191,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } ddr->err_disable = val; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); return 0; } else if (strcmp(argv[1], "errdetectclr") == 0) { val = ddr->err_detect; @@ -249,8 +249,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) printf("Incorrect command\n"); ddr->ecc_err_inject = val; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); return 0; } else if (strcmp(argv[1], "mirror") == 0) { val = ddr->ecc_err_inject; @@ -282,26 +282,26 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* enable injects */ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); /* write memory location injecting errors */ ppcDWstore((u32 *) i, pattern); - __asm__ __volatile__("sync"); + sync(); /* disable injects */ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); /* read data, this generates ECC error */ ppcDWload((u32 *) i, ret); - __asm__ __volatile__("sync"); + sync(); /* re-initialize memory, double word write the location again, * generates new ECC code this time */ ppcDWstore((u32 *) i, writeback); - __asm__ __volatile__("sync"); + sync(); } enable_interrupts(); return 0; @@ -321,29 +321,29 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* enable injects */ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); /* write memory location injecting errors */ *(u32 *) i = 0xfedcba98UL; - __asm__ __volatile__("sync"); + sync(); /* sub double word write, * bus will read-modify-write, * generates ECC error */ *((u32 *) i + 1) = 0x76543210UL; - __asm__ __volatile__("sync"); + sync(); /* disable injects */ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN; - __asm__ __volatile__("sync"); - __asm__ __volatile__("isync"); + sync(); + isync(); /* re-initialize memory, * double word write the location again, * generates new ECC code this time */ ppcDWstore((u32 *) i, writeback); - __asm__ __volatile__("sync"); + sync(); } enable_interrupts(); return 0; diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig new file mode 100644 index 0000000000..74c4ff3ed4 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig @@ -0,0 +1,32 @@ +menu "ELBC register setup" + +choice + prompt "OR/BR for NAND SPL" + +config ELBC_BR_OR_NAND_PRELIM_NONE + bool "None" + +config ELBC_BR_OR_NAND_PRELIM_0 + bool "0" + +config ELBC_BR_OR_NAND_PRELIM_1 + bool "1" + +config ELBC_BR_OR_NAND_PRELIM_2 + bool "2" + +config ELBC_BR_OR_NAND_PRELIM_3 + bool "3" + +config ELBC_BR_OR_NAND_PRELIM_4 + bool "4" + +endchoice + +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3" +source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4" + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 new file mode 100644 index 0000000000..23e81ab0bf --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR0_OR0 + bool "ELBC BR0/OR0" + +if ELBC_BR0_OR0 + +config BR0_OR0_NAME + string "Identifier" + +config BR0_OR0_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR0_PORTSIZE_8BIT + bool "8-bit" + +config BR0_PORTSIZE_16BIT + depends on !BR0_MACHINE_FCM + bool "16-bit" + + +config BR0_PORTSIZE_32BIT + depends on !BR0_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR0_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR0_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR0_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR0_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR0_WRITE_PROTECT + bool "Write-protect" + +config BR0_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR0_MACHINE_GPCM + bool "GPCM" + +config BR0_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR0_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR0_MACHINE_UPMA + select BR0_MACHINE_UPM + bool "UPM (A)" + +config BR0_MACHINE_UPMB + select BR0_MACHINE_UPM + bool "UPM (B)" + +config BR0_MACHINE_UPMC + select BR0_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR0_ATOMIC_NONE + bool "No atomic operations" + +config BR0_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR0_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM || BR0_MACHINE_UPM || BR0_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR0_AM_32_KBYTES + depends on !BR0_MACHINE_SDRAM + bool "32 kb" + +config OR0_AM_64_KBYTES + bool "64 kb" + +config OR0_AM_128_KBYTES + bool "128 kb" + +config OR0_AM_256_KBYTES + bool "256 kb" + +config OR0_AM_512_KBYTES + bool "512 kb" + +config OR0_AM_1_MBYTES + bool "1 mb" + +config OR0_AM_2_MBYTES + bool "2 mb" + +config OR0_AM_4_MBYTES + bool "4 mb" + +config OR0_AM_8_MBYTES + bool "8 mb" + +config OR0_AM_16_MBYTES + bool "16 mb" + +config OR0_AM_32_MBYTES + bool "32 mb" + +config OR0_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_256_MBYTES + bool "256 mb" + +config OR0_AM_512_MBYTES + depends on BR0_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR0_AM_1_GBYTES + bool "1 gb" + +config OR0_AM_2_GBYTES + depends on BR0_MACHINE_FCM + bool "2 gb" + +config OR0_AM_4_GBYTES + depends on BR0_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR0_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR0_BCTLD_ASSERTED + bool "Asserted" + +config OR0_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR0_SCY_0 + bool "No wait states" + +config OR0_SCY_1 + bool "1 wait state" + +config OR0_SCY_2 + bool "2 wait states" + +config OR0_SCY_3 + bool "3 wait states" + +config OR0_SCY_4 + bool "4 wait states" + +config OR0_SCY_5 + bool "5 wait states" + +config OR0_SCY_6 + bool "6 wait states" + +config OR0_SCY_7 + bool "7 wait states" + +config OR0_SCY_8 + depends on BR0_MACHINE_GPCM + bool "8 wait states" + +config OR0_SCY_9 + depends on BR0_MACHINE_GPCM + bool "9 wait states" + +config OR0_SCY_10 + depends on BR0_MACHINE_GPCM + bool "10 wait states" + +config OR0_SCY_11 + depends on BR0_MACHINE_GPCM + bool "11 wait states" + +config OR0_SCY_12 + depends on BR0_MACHINE_GPCM + bool "12 wait states" + +config OR0_SCY_13 + depends on BR0_MACHINE_GPCM + bool "13 wait states" + +config OR0_SCY_14 + depends on BR0_MACHINE_GPCM + bool "14 wait states" + +config OR0_SCY_15 + depends on BR0_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR0_MACHINE_GPCM || BR0_MACHINE_FCM + +if BR0_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR0_CSNT_NORMAL + bool "Normal" + +config OR0_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR0_ACS_SAME_TIME + bool "At the same time" + +config OR0_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR0_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR0_XACS_NORMAL + bool "Normal" + +config OR0_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR0_SETA_INTERNAL + bool "Access is terminated internally" + +config OR0_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR0_MACHINE_GPCM + +if BR0_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR0_PGS_SMALL + bool "Small page device" + +config OR0_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR0_CSCT_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 cycle" + +config OR0_CSCT_2_CYCLE + depends on OR0_TRLX_RELAXED + bool "2 cycles" + +config OR0_CSCT_4_CYCLE + depends on OR0_TRLX_NORMAL + bool "4 cycles" + +config OR0_CSCT_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR0_CST_COINCIDENT + depends on OR0_TRLX_NORMAL + bool "Coincident with any command" + +config OR0_CST_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.25 clocks after" + +config OR0_CST_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks after" + +config OR0_CST_ONE_CLOCK + depends on OR0_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR0_CHT_HALF_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.5 clocks before" + +config OR0_CHT_ONE_CLOCK + depends on OR0_TRLX_NORMAL + bool "1 clock before" + +config OR0_CHT_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "1.5 clocks before" + +config OR0_CHT_TWO_CLOCK + depends on OR0_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR0_RST_THREE_QUARTER_CLOCK + depends on OR0_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR0_RST_ONE_HALF_CLOCK + depends on OR0_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR0_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR0_MACHINE_FCM + +if BR0_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR0_BI_BURSTSUPPORT + bool "Support burst access" + +config OR0_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR0_MACHINE_UPM + +if BR0_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR0_COLS_7 + bool "7" + +config OR0_COLS_8 + bool "8" + +config OR0_COLS_9 + bool "9" + +config OR0_COLS_10 + bool "10" + +config OR0_COLS_11 + bool "11" + +config OR0_COLS_12 + bool "12" + +config OR0_COLS_13 + bool "13" + +config OR0_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR0_ROWS_9 + bool "9" + +config OR0_ROWS_10 + bool "10" + +config OR0_ROWS_11 + bool "11" + +config OR0_ROWS_12 + bool "12" + +config OR0_ROWS_13 + bool "13" + +config OR0_ROWS_14 + bool "14" + +config OR0_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR0_PMSEL_BTB + bool "Back-to-back" + +config OR0_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR0_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR0_TRLX_NORMAL + bool "Normal" + +config OR0_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR0_EHTR_NORMAL + depends on OR0_TRLX_NORMAL + bool "Normal" + +config OR0_EHTR_1_CYCLE + depends on OR0_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR0_EHTR_4_CYCLE + depends on OR0_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR0_EHTR_8_CYCLE + depends on OR0_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR0_EAD_NONE + bool "None" + +config OR0_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR0_OR0 + +config BR0_PORTSIZE + hex + default 0x800 if BR0_PORTSIZE_8BIT + default 0x1000 if BR0_PORTSIZE_16BIT + default 0x1800 if BR0_PORTSIZE_32BIT + +config BR0_ERRORCHECKING + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if BR0_ERRORCHECKING_DISABLED + default 0x200 if BR0_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR0_ERRORCHECKING_BOTH + +config BR0_WRITE_PROTECT_BIT + hex + default 0x0 if !BR0_WRITE_PROTECT + default 0x100 if BR0_WRITE_PROTECT + +config BR0_MACHINE + hex + default 0x0 if BR0_MACHINE_GPCM + default 0x20 if BR0_MACHINE_FCM + default 0x60 if BR0_MACHINE_SDRAM + default 0x80 if BR0_MACHINE_UPMA + default 0xa0 if BR0_MACHINE_UPMB + default 0xc0 if BR0_MACHINE_UPMC + +config BR0_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR0_ATOMIC_NONE + default 0x4 if BR0_ATOMIC_RAWA + default 0x8 if BR0_ATOMIC_WARA + +config BR0_VALID_BIT + hex + default 0x0 if !ELBC_BR0_OR0 + default 0x1 if ELBC_BR0_OR0 + +config OR0_AM + hex + default 0xffff8000 if OR0_AM_32_KBYTES && !BR0_MACHINE_SDRAM + default 0xffff0000 if OR0_AM_64_KBYTES + default 0xfffe0000 if OR0_AM_128_KBYTES + default 0xfffc0000 if OR0_AM_256_KBYTES + default 0xfff80000 if OR0_AM_512_KBYTES + default 0xfff00000 if OR0_AM_1_MBYTES + default 0xffe00000 if OR0_AM_2_MBYTES + default 0xffc00000 if OR0_AM_4_MBYTES + default 0xff800000 if OR0_AM_8_MBYTES + default 0xff000000 if OR0_AM_16_MBYTES + default 0xfe000000 if OR0_AM_32_MBYTES + default 0xfc000000 if OR0_AM_64_MBYTES + default 0xf8000000 if OR0_AM_128_MBYTES + default 0xf0000000 if OR0_AM_256_MBYTES + default 0xe0000000 if OR0_AM_512_MBYTES + default 0xc0000000 if OR0_AM_1_GBYTES + default 0x80000000 if OR0_AM_2_GBYTES + default 0x00000000 if OR0_AM_4_GBYTES + +config OR0_XAM + hex + default 0x0 if !OR0_XAM_SET + default 0x6000 if OR0_XAM_SET + +config OR0_BCTLD + hex + default 0x0 if OR0_BCTLD_ASSERTED + default 0x1000 if OR0_BCTLD_NOT_ASSERTED + +config OR0_BI + hex + default 0x0 if !BR0_MACHINE_UPM + default 0x0 if OR0_BI_BURSTSUPPORT + default 0x100 if OR0_BI_BURSTINHIBIT + +config OR0_COLS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_COLS_7 + default 0x400 if OR0_COLS_8 + default 0x800 if OR0_COLS_9 + default 0xc00 if OR0_COLS_10 + default 0x1000 if OR0_COLS_11 + default 0x1400 if OR0_COLS_12 + default 0x1800 if OR0_COLS_13 + default 0x1c00 if OR0_COLS_14 + +config OR0_ROWS + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_ROWS_9 + default 0x40 if OR0_ROWS_10 + default 0x80 if OR0_ROWS_11 + default 0xc0 if OR0_ROWS_12 + default 0x100 if OR0_ROWS_13 + default 0x140 if OR0_ROWS_14 + default 0x180 if OR0_ROWS_15 + +config OR0_PMSEL + hex + default 0x0 if !BR0_MACHINE_SDRAM + default 0x0 if OR0_PMSEL_BTB + default 0x20 if OR0_PMSEL_KEPT_OPEN + +config OR0_SCY + hex + default 0x0 if !BR0_MACHINE_GPCM && !BR0_MACHINE_FCM + default 0x0 if OR0_SCY_0 + default 0x10 if OR0_SCY_1 + default 0x20 if OR0_SCY_2 + default 0x30 if OR0_SCY_3 + default 0x40 if OR0_SCY_4 + default 0x50 if OR0_SCY_5 + default 0x60 if OR0_SCY_6 + default 0x70 if OR0_SCY_7 + default 0x80 if OR0_SCY_8 + default 0x90 if OR0_SCY_9 + default 0xa0 if OR0_SCY_10 + default 0xb0 if OR0_SCY_11 + default 0xc0 if OR0_SCY_12 + default 0xd0 if OR0_SCY_13 + default 0xe0 if OR0_SCY_14 + default 0xf0 if OR0_SCY_15 + +config OR0_PGS + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_PGS_SMALL + default 0x400 if OR0_PGS_LARGE + +config OR0_CSCT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CSCT_1_CYCLE + default 0x0 if OR0_CSCT_2_CYCLE + default 0x200 if OR0_CSCT_4_CYCLE + default 0x200 if OR0_CSCT_8_CYCLE + +config OR0_CST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CST_COINCIDENT + default 0x100 if OR0_CST_QUARTER_CLOCK + default 0x0 if OR0_CST_HALF_CLOCK + default 0x100 if OR0_CST_ONE_CLOCK + +config OR0_CHT + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_CHT_HALF_CLOCK + default 0x80 if OR0_CHT_ONE_CLOCK + default 0x0 if OR0_CHT_ONE_HALF_CLOCK + default 0x80 if OR0_CHT_TWO_CLOCK + +config OR0_RST + hex + default 0x0 if !BR0_MACHINE_FCM + default 0x0 if OR0_RST_THREE_QUARTER_CLOCK + default 0x8 if OR0_RST_ONE_CLOCK + default 0x0 if OR0_RST_ONE_HALF_CLOCK + +config OR0_CSNT + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_CSNT_NORMAL + default 0x800 if OR0_CSNT_EARLIER + +config OR0_ACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_ACS_SAME_TIME + default 0x400 if OR0_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR0_ACS_HALF_CYCLE_EARLIER + +config OR0_XACS + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_XACS_NORMAL + default 0x100 if OR0_XACS_EXTENDED + +config OR0_SETA + hex + default 0x0 if !BR0_MACHINE_GPCM + default 0x0 if OR0_SETA_INTERNAL + default 0x8 if OR0_SETA_EXTERNAL + +config OR0_TRLX + hex + default 0x0 if OR0_TRLX_NORMAL + default 0x4 if OR0_TRLX_RELAXED + +config OR0_EHTR + hex + default 0x0 if OR0_EHTR_NORMAL + default 0x2 if OR0_EHTR_1_CYCLE + default 0x0 if OR0_EHTR_4_CYCLE + default 0x2 if OR0_EHTR_8_CYCLE + +config OR0_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR0_EAD_NONE + default 0x1 if OR0_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 new file mode 100644 index 0000000000..08dcc7dd2b --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR1_OR1 + bool "ELBC BR1/OR1" + +if ELBC_BR1_OR1 + +config BR1_OR1_NAME + string "Identifier" + +config BR1_OR1_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR1_PORTSIZE_8BIT + bool "8-bit" + +config BR1_PORTSIZE_16BIT + depends on !BR1_MACHINE_FCM + bool "16-bit" + + +config BR1_PORTSIZE_32BIT + depends on !BR1_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR1_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR1_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR1_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR1_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR1_WRITE_PROTECT + bool "Write-protect" + +config BR1_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR1_MACHINE_GPCM + bool "GPCM" + +config BR1_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR1_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR1_MACHINE_UPMA + select BR1_MACHINE_UPM + bool "UPM (A)" + +config BR1_MACHINE_UPMB + select BR1_MACHINE_UPM + bool "UPM (B)" + +config BR1_MACHINE_UPMC + select BR1_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR1_ATOMIC_NONE + bool "No atomic operations" + +config BR1_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR1_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM || BR1_MACHINE_UPM || BR1_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR1_AM_32_KBYTES + depends on !BR1_MACHINE_SDRAM + bool "32 kb" + +config OR1_AM_64_KBYTES + bool "64 kb" + +config OR1_AM_128_KBYTES + bool "128 kb" + +config OR1_AM_256_KBYTES + bool "256 kb" + +config OR1_AM_512_KBYTES + bool "512 kb" + +config OR1_AM_1_MBYTES + bool "1 mb" + +config OR1_AM_2_MBYTES + bool "2 mb" + +config OR1_AM_4_MBYTES + bool "4 mb" + +config OR1_AM_8_MBYTES + bool "8 mb" + +config OR1_AM_16_MBYTES + bool "16 mb" + +config OR1_AM_32_MBYTES + bool "32 mb" + +config OR1_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_256_MBYTES + bool "256 mb" + +config OR1_AM_512_MBYTES + depends on BR1_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR1_AM_1_GBYTES + bool "1 gb" + +config OR1_AM_2_GBYTES + depends on BR1_MACHINE_FCM + bool "2 gb" + +config OR1_AM_4_GBYTES + depends on BR1_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR1_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR1_BCTLD_ASSERTED + bool "Asserted" + +config OR1_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR1_SCY_0 + bool "No wait states" + +config OR1_SCY_1 + bool "1 wait state" + +config OR1_SCY_2 + bool "2 wait states" + +config OR1_SCY_3 + bool "3 wait states" + +config OR1_SCY_4 + bool "4 wait states" + +config OR1_SCY_5 + bool "5 wait states" + +config OR1_SCY_6 + bool "6 wait states" + +config OR1_SCY_7 + bool "7 wait states" + +config OR1_SCY_8 + depends on BR1_MACHINE_GPCM + bool "8 wait states" + +config OR1_SCY_9 + depends on BR1_MACHINE_GPCM + bool "9 wait states" + +config OR1_SCY_10 + depends on BR1_MACHINE_GPCM + bool "10 wait states" + +config OR1_SCY_11 + depends on BR1_MACHINE_GPCM + bool "11 wait states" + +config OR1_SCY_12 + depends on BR1_MACHINE_GPCM + bool "12 wait states" + +config OR1_SCY_13 + depends on BR1_MACHINE_GPCM + bool "13 wait states" + +config OR1_SCY_14 + depends on BR1_MACHINE_GPCM + bool "14 wait states" + +config OR1_SCY_15 + depends on BR1_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR1_MACHINE_GPCM || BR1_MACHINE_FCM + +if BR1_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR1_CSNT_NORMAL + bool "Normal" + +config OR1_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR1_ACS_SAME_TIME + bool "At the same time" + +config OR1_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR1_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR1_XACS_NORMAL + bool "Normal" + +config OR1_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR1_SETA_INTERNAL + bool "Access is terminated internally" + +config OR1_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR1_MACHINE_GPCM + +if BR1_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR1_PGS_SMALL + bool "Small page device" + +config OR1_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR1_CSCT_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 cycle" + +config OR1_CSCT_2_CYCLE + depends on OR1_TRLX_RELAXED + bool "2 cycles" + +config OR1_CSCT_4_CYCLE + depends on OR1_TRLX_NORMAL + bool "4 cycles" + +config OR1_CSCT_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR1_CST_COINCIDENT + depends on OR1_TRLX_NORMAL + bool "Coincident with any command" + +config OR1_CST_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.25 clocks after" + +config OR1_CST_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks after" + +config OR1_CST_ONE_CLOCK + depends on OR1_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR1_CHT_HALF_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.5 clocks before" + +config OR1_CHT_ONE_CLOCK + depends on OR1_TRLX_NORMAL + bool "1 clock before" + +config OR1_CHT_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "1.5 clocks before" + +config OR1_CHT_TWO_CLOCK + depends on OR1_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR1_RST_THREE_QUARTER_CLOCK + depends on OR1_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR1_RST_ONE_HALF_CLOCK + depends on OR1_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR1_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR1_MACHINE_FCM + +if BR1_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR1_BI_BURSTSUPPORT + bool "Support burst access" + +config OR1_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR1_MACHINE_UPM + +if BR1_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR1_COLS_7 + bool "7" + +config OR1_COLS_8 + bool "8" + +config OR1_COLS_9 + bool "9" + +config OR1_COLS_10 + bool "10" + +config OR1_COLS_11 + bool "11" + +config OR1_COLS_12 + bool "12" + +config OR1_COLS_13 + bool "13" + +config OR1_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR1_ROWS_9 + bool "9" + +config OR1_ROWS_10 + bool "10" + +config OR1_ROWS_11 + bool "11" + +config OR1_ROWS_12 + bool "12" + +config OR1_ROWS_13 + bool "13" + +config OR1_ROWS_14 + bool "14" + +config OR1_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR1_PMSEL_BTB + bool "Back-to-back" + +config OR1_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR1_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR1_TRLX_NORMAL + bool "Normal" + +config OR1_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR1_EHTR_NORMAL + depends on OR1_TRLX_NORMAL + bool "Normal" + +config OR1_EHTR_1_CYCLE + depends on OR1_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR1_EHTR_4_CYCLE + depends on OR1_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR1_EHTR_8_CYCLE + depends on OR1_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR1_EAD_NONE + bool "None" + +config OR1_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR1_OR1 + +config BR1_PORTSIZE + hex + default 0x800 if BR1_PORTSIZE_8BIT + default 0x1000 if BR1_PORTSIZE_16BIT + default 0x1800 if BR1_PORTSIZE_32BIT + +config BR1_ERRORCHECKING + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if BR1_ERRORCHECKING_DISABLED + default 0x200 if BR1_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR1_ERRORCHECKING_BOTH + +config BR1_WRITE_PROTECT_BIT + hex + default 0x0 if !BR1_WRITE_PROTECT + default 0x100 if BR1_WRITE_PROTECT + +config BR1_MACHINE + hex + default 0x0 if BR1_MACHINE_GPCM + default 0x20 if BR1_MACHINE_FCM + default 0x60 if BR1_MACHINE_SDRAM + default 0x80 if BR1_MACHINE_UPMA + default 0xa0 if BR1_MACHINE_UPMB + default 0xc0 if BR1_MACHINE_UPMC + +config BR1_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR1_ATOMIC_NONE + default 0x4 if BR1_ATOMIC_RAWA + default 0x8 if BR1_ATOMIC_WARA + +config BR1_VALID_BIT + hex + default 0x0 if !ELBC_BR1_OR1 + default 0x1 if ELBC_BR1_OR1 + +config OR1_AM + hex + default 0xffff8000 if OR1_AM_32_KBYTES && !BR1_MACHINE_SDRAM + default 0xffff0000 if OR1_AM_64_KBYTES + default 0xfffe0000 if OR1_AM_128_KBYTES + default 0xfffc0000 if OR1_AM_256_KBYTES + default 0xfff80000 if OR1_AM_512_KBYTES + default 0xfff00000 if OR1_AM_1_MBYTES + default 0xffe00000 if OR1_AM_2_MBYTES + default 0xffc00000 if OR1_AM_4_MBYTES + default 0xff800000 if OR1_AM_8_MBYTES + default 0xff000000 if OR1_AM_16_MBYTES + default 0xfe000000 if OR1_AM_32_MBYTES + default 0xfc000000 if OR1_AM_64_MBYTES + default 0xf8000000 if OR1_AM_128_MBYTES + default 0xf0000000 if OR1_AM_256_MBYTES + default 0xe0000000 if OR1_AM_512_MBYTES + default 0xc0000000 if OR1_AM_1_GBYTES + default 0x80000000 if OR1_AM_2_GBYTES + default 0x00000000 if OR1_AM_4_GBYTES + +config OR1_XAM + hex + default 0x0 if !OR1_XAM_SET + default 0x6000 if OR1_XAM_SET + +config OR1_BCTLD + hex + default 0x0 if OR1_BCTLD_ASSERTED + default 0x1000 if OR1_BCTLD_NOT_ASSERTED + +config OR1_BI + hex + default 0x0 if !BR1_MACHINE_UPM + default 0x0 if OR1_BI_BURSTSUPPORT + default 0x100 if OR1_BI_BURSTINHIBIT + +config OR1_COLS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_COLS_7 + default 0x400 if OR1_COLS_8 + default 0x800 if OR1_COLS_9 + default 0xc00 if OR1_COLS_10 + default 0x1000 if OR1_COLS_11 + default 0x1400 if OR1_COLS_12 + default 0x1800 if OR1_COLS_13 + default 0x1c00 if OR1_COLS_14 + +config OR1_ROWS + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_ROWS_9 + default 0x40 if OR1_ROWS_10 + default 0x80 if OR1_ROWS_11 + default 0xc0 if OR1_ROWS_12 + default 0x100 if OR1_ROWS_13 + default 0x140 if OR1_ROWS_14 + default 0x180 if OR1_ROWS_15 + +config OR1_PMSEL + hex + default 0x0 if !BR1_MACHINE_SDRAM + default 0x0 if OR1_PMSEL_BTB + default 0x20 if OR1_PMSEL_KEPT_OPEN + +config OR1_SCY + hex + default 0x0 if !BR1_MACHINE_GPCM && !BR1_MACHINE_FCM + default 0x0 if OR1_SCY_0 + default 0x10 if OR1_SCY_1 + default 0x20 if OR1_SCY_2 + default 0x30 if OR1_SCY_3 + default 0x40 if OR1_SCY_4 + default 0x50 if OR1_SCY_5 + default 0x60 if OR1_SCY_6 + default 0x70 if OR1_SCY_7 + default 0x80 if OR1_SCY_8 + default 0x90 if OR1_SCY_9 + default 0xa0 if OR1_SCY_10 + default 0xb0 if OR1_SCY_11 + default 0xc0 if OR1_SCY_12 + default 0xd0 if OR1_SCY_13 + default 0xe0 if OR1_SCY_14 + default 0xf0 if OR1_SCY_15 + +config OR1_PGS + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_PGS_SMALL + default 0x400 if OR1_PGS_LARGE + +config OR1_CSCT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CSCT_1_CYCLE + default 0x0 if OR1_CSCT_2_CYCLE + default 0x200 if OR1_CSCT_4_CYCLE + default 0x200 if OR1_CSCT_8_CYCLE + +config OR1_CST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CST_COINCIDENT + default 0x100 if OR1_CST_QUARTER_CLOCK + default 0x0 if OR1_CST_HALF_CLOCK + default 0x100 if OR1_CST_ONE_CLOCK + +config OR1_CHT + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_CHT_HALF_CLOCK + default 0x80 if OR1_CHT_ONE_CLOCK + default 0x0 if OR1_CHT_ONE_HALF_CLOCK + default 0x80 if OR1_CHT_TWO_CLOCK + +config OR1_RST + hex + default 0x0 if !BR1_MACHINE_FCM + default 0x0 if OR1_RST_THREE_QUARTER_CLOCK + default 0x8 if OR1_RST_ONE_CLOCK + default 0x0 if OR1_RST_ONE_HALF_CLOCK + +config OR1_CSNT + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_CSNT_NORMAL + default 0x800 if OR1_CSNT_EARLIER + +config OR1_ACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_ACS_SAME_TIME + default 0x400 if OR1_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR1_ACS_HALF_CYCLE_EARLIER + +config OR1_XACS + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_XACS_NORMAL + default 0x100 if OR1_XACS_EXTENDED + +config OR1_SETA + hex + default 0x0 if !BR1_MACHINE_GPCM + default 0x0 if OR1_SETA_INTERNAL + default 0x8 if OR1_SETA_EXTERNAL + +config OR1_TRLX + hex + default 0x0 if OR1_TRLX_NORMAL + default 0x4 if OR1_TRLX_RELAXED + +config OR1_EHTR + hex + default 0x0 if OR1_EHTR_NORMAL + default 0x2 if OR1_EHTR_1_CYCLE + default 0x0 if OR1_EHTR_4_CYCLE + default 0x2 if OR1_EHTR_8_CYCLE + +config OR1_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR1_EAD_NONE + default 0x1 if OR1_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 new file mode 100644 index 0000000000..298d87f5e0 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR2_OR2 + bool "ELBC BR2/OR2" + +if ELBC_BR2_OR2 + +config BR2_OR2_NAME + string "Identifier" + +config BR2_OR2_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR2_PORTSIZE_8BIT + bool "8-bit" + +config BR2_PORTSIZE_16BIT + depends on !BR2_MACHINE_FCM + bool "16-bit" + + +config BR2_PORTSIZE_32BIT + depends on !BR2_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR2_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR2_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR2_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR2_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR2_WRITE_PROTECT + bool "Write-protect" + +config BR2_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR2_MACHINE_GPCM + bool "GPCM" + +config BR2_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR2_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR2_MACHINE_UPMA + select BR2_MACHINE_UPM + bool "UPM (A)" + +config BR2_MACHINE_UPMB + select BR2_MACHINE_UPM + bool "UPM (B)" + +config BR2_MACHINE_UPMC + select BR2_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR2_ATOMIC_NONE + bool "No atomic operations" + +config BR2_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR2_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM || BR2_MACHINE_UPM || BR2_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR2_AM_32_KBYTES + depends on !BR2_MACHINE_SDRAM + bool "32 kb" + +config OR2_AM_64_KBYTES + bool "64 kb" + +config OR2_AM_128_KBYTES + bool "128 kb" + +config OR2_AM_256_KBYTES + bool "256 kb" + +config OR2_AM_512_KBYTES + bool "512 kb" + +config OR2_AM_1_MBYTES + bool "1 mb" + +config OR2_AM_2_MBYTES + bool "2 mb" + +config OR2_AM_4_MBYTES + bool "4 mb" + +config OR2_AM_8_MBYTES + bool "8 mb" + +config OR2_AM_16_MBYTES + bool "16 mb" + +config OR2_AM_32_MBYTES + bool "32 mb" + +config OR2_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_256_MBYTES + bool "256 mb" + +config OR2_AM_512_MBYTES + depends on BR2_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR2_AM_1_GBYTES + bool "1 gb" + +config OR2_AM_2_GBYTES + depends on BR2_MACHINE_FCM + bool "2 gb" + +config OR2_AM_4_GBYTES + depends on BR2_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR2_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR2_BCTLD_ASSERTED + bool "Asserted" + +config OR2_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR2_SCY_0 + bool "No wait states" + +config OR2_SCY_1 + bool "1 wait state" + +config OR2_SCY_2 + bool "2 wait states" + +config OR2_SCY_3 + bool "3 wait states" + +config OR2_SCY_4 + bool "4 wait states" + +config OR2_SCY_5 + bool "5 wait states" + +config OR2_SCY_6 + bool "6 wait states" + +config OR2_SCY_7 + bool "7 wait states" + +config OR2_SCY_8 + depends on BR2_MACHINE_GPCM + bool "8 wait states" + +config OR2_SCY_9 + depends on BR2_MACHINE_GPCM + bool "9 wait states" + +config OR2_SCY_10 + depends on BR2_MACHINE_GPCM + bool "10 wait states" + +config OR2_SCY_11 + depends on BR2_MACHINE_GPCM + bool "11 wait states" + +config OR2_SCY_12 + depends on BR2_MACHINE_GPCM + bool "12 wait states" + +config OR2_SCY_13 + depends on BR2_MACHINE_GPCM + bool "13 wait states" + +config OR2_SCY_14 + depends on BR2_MACHINE_GPCM + bool "14 wait states" + +config OR2_SCY_15 + depends on BR2_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR2_MACHINE_GPCM || BR2_MACHINE_FCM + +if BR2_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR2_CSNT_NORMAL + bool "Normal" + +config OR2_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR2_ACS_SAME_TIME + bool "At the same time" + +config OR2_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR2_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR2_XACS_NORMAL + bool "Normal" + +config OR2_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR2_SETA_INTERNAL + bool "Access is terminated internally" + +config OR2_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR2_MACHINE_GPCM + +if BR2_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR2_PGS_SMALL + bool "Small page device" + +config OR2_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR2_CSCT_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 cycle" + +config OR2_CSCT_2_CYCLE + depends on OR2_TRLX_RELAXED + bool "2 cycles" + +config OR2_CSCT_4_CYCLE + depends on OR2_TRLX_NORMAL + bool "4 cycles" + +config OR2_CSCT_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR2_CST_COINCIDENT + depends on OR2_TRLX_NORMAL + bool "Coincident with any command" + +config OR2_CST_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.25 clocks after" + +config OR2_CST_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks after" + +config OR2_CST_ONE_CLOCK + depends on OR2_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR2_CHT_HALF_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.5 clocks before" + +config OR2_CHT_ONE_CLOCK + depends on OR2_TRLX_NORMAL + bool "1 clock before" + +config OR2_CHT_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "1.5 clocks before" + +config OR2_CHT_TWO_CLOCK + depends on OR2_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR2_RST_THREE_QUARTER_CLOCK + depends on OR2_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR2_RST_ONE_HALF_CLOCK + depends on OR2_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR2_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR2_MACHINE_FCM + +if BR2_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR2_BI_BURSTSUPPORT + bool "Support burst access" + +config OR2_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR2_MACHINE_UPM + +if BR2_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR2_COLS_7 + bool "7" + +config OR2_COLS_8 + bool "8" + +config OR2_COLS_9 + bool "9" + +config OR2_COLS_10 + bool "10" + +config OR2_COLS_11 + bool "11" + +config OR2_COLS_12 + bool "12" + +config OR2_COLS_13 + bool "13" + +config OR2_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR2_ROWS_9 + bool "9" + +config OR2_ROWS_10 + bool "10" + +config OR2_ROWS_11 + bool "11" + +config OR2_ROWS_12 + bool "12" + +config OR2_ROWS_13 + bool "13" + +config OR2_ROWS_14 + bool "14" + +config OR2_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR2_PMSEL_BTB + bool "Back-to-back" + +config OR2_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR2_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR2_TRLX_NORMAL + bool "Normal" + +config OR2_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR2_EHTR_NORMAL + depends on OR2_TRLX_NORMAL + bool "Normal" + +config OR2_EHTR_1_CYCLE + depends on OR2_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR2_EHTR_4_CYCLE + depends on OR2_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR2_EHTR_8_CYCLE + depends on OR2_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR2_EAD_NONE + bool "None" + +config OR2_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR2_OR2 + +config BR2_PORTSIZE + hex + default 0x800 if BR2_PORTSIZE_8BIT + default 0x1000 if BR2_PORTSIZE_16BIT + default 0x1800 if BR2_PORTSIZE_32BIT + +config BR2_ERRORCHECKING + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if BR2_ERRORCHECKING_DISABLED + default 0x200 if BR2_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR2_ERRORCHECKING_BOTH + +config BR2_WRITE_PROTECT_BIT + hex + default 0x0 if !BR2_WRITE_PROTECT + default 0x100 if BR2_WRITE_PROTECT + +config BR2_MACHINE + hex + default 0x0 if BR2_MACHINE_GPCM + default 0x20 if BR2_MACHINE_FCM + default 0x60 if BR2_MACHINE_SDRAM + default 0x80 if BR2_MACHINE_UPMA + default 0xa0 if BR2_MACHINE_UPMB + default 0xc0 if BR2_MACHINE_UPMC + +config BR2_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR2_ATOMIC_NONE + default 0x4 if BR2_ATOMIC_RAWA + default 0x8 if BR2_ATOMIC_WARA + +config BR2_VALID_BIT + hex + default 0x0 if !ELBC_BR2_OR2 + default 0x1 if ELBC_BR2_OR2 + +config OR2_AM + hex + default 0xffff8000 if OR2_AM_32_KBYTES && !BR2_MACHINE_SDRAM + default 0xffff0000 if OR2_AM_64_KBYTES + default 0xfffe0000 if OR2_AM_128_KBYTES + default 0xfffc0000 if OR2_AM_256_KBYTES + default 0xfff80000 if OR2_AM_512_KBYTES + default 0xfff00000 if OR2_AM_1_MBYTES + default 0xffe00000 if OR2_AM_2_MBYTES + default 0xffc00000 if OR2_AM_4_MBYTES + default 0xff800000 if OR2_AM_8_MBYTES + default 0xff000000 if OR2_AM_16_MBYTES + default 0xfe000000 if OR2_AM_32_MBYTES + default 0xfc000000 if OR2_AM_64_MBYTES + default 0xf8000000 if OR2_AM_128_MBYTES + default 0xf0000000 if OR2_AM_256_MBYTES + default 0xe0000000 if OR2_AM_512_MBYTES + default 0xc0000000 if OR2_AM_1_GBYTES + default 0x80000000 if OR2_AM_2_GBYTES + default 0x00000000 if OR2_AM_4_GBYTES + +config OR2_XAM + hex + default 0x0 if !OR2_XAM_SET + default 0x6000 if OR2_XAM_SET + +config OR2_BCTLD + hex + default 0x0 if OR2_BCTLD_ASSERTED + default 0x1000 if OR2_BCTLD_NOT_ASSERTED + +config OR2_BI + hex + default 0x0 if !BR2_MACHINE_UPM + default 0x0 if OR2_BI_BURSTSUPPORT + default 0x100 if OR2_BI_BURSTINHIBIT + +config OR2_COLS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_COLS_7 + default 0x400 if OR2_COLS_8 + default 0x800 if OR2_COLS_9 + default 0xc00 if OR2_COLS_10 + default 0x1000 if OR2_COLS_11 + default 0x1400 if OR2_COLS_12 + default 0x1800 if OR2_COLS_13 + default 0x1c00 if OR2_COLS_14 + +config OR2_ROWS + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_ROWS_9 + default 0x40 if OR2_ROWS_10 + default 0x80 if OR2_ROWS_11 + default 0xc0 if OR2_ROWS_12 + default 0x100 if OR2_ROWS_13 + default 0x140 if OR2_ROWS_14 + default 0x180 if OR2_ROWS_15 + +config OR2_PMSEL + hex + default 0x0 if !BR2_MACHINE_SDRAM + default 0x0 if OR2_PMSEL_BTB + default 0x20 if OR2_PMSEL_KEPT_OPEN + +config OR2_SCY + hex + default 0x0 if !BR2_MACHINE_GPCM && !BR2_MACHINE_FCM + default 0x0 if OR2_SCY_0 + default 0x10 if OR2_SCY_1 + default 0x20 if OR2_SCY_2 + default 0x30 if OR2_SCY_3 + default 0x40 if OR2_SCY_4 + default 0x50 if OR2_SCY_5 + default 0x60 if OR2_SCY_6 + default 0x70 if OR2_SCY_7 + default 0x80 if OR2_SCY_8 + default 0x90 if OR2_SCY_9 + default 0xa0 if OR2_SCY_10 + default 0xb0 if OR2_SCY_11 + default 0xc0 if OR2_SCY_12 + default 0xd0 if OR2_SCY_13 + default 0xe0 if OR2_SCY_14 + default 0xf0 if OR2_SCY_15 + +config OR2_PGS + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_PGS_SMALL + default 0x400 if OR2_PGS_LARGE + +config OR2_CSCT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CSCT_1_CYCLE + default 0x0 if OR2_CSCT_2_CYCLE + default 0x200 if OR2_CSCT_4_CYCLE + default 0x200 if OR2_CSCT_8_CYCLE + +config OR2_CST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CST_COINCIDENT + default 0x100 if OR2_CST_QUARTER_CLOCK + default 0x0 if OR2_CST_HALF_CLOCK + default 0x100 if OR2_CST_ONE_CLOCK + +config OR2_CHT + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_CHT_HALF_CLOCK + default 0x80 if OR2_CHT_ONE_CLOCK + default 0x0 if OR2_CHT_ONE_HALF_CLOCK + default 0x80 if OR2_CHT_TWO_CLOCK + +config OR2_RST + hex + default 0x0 if !BR2_MACHINE_FCM + default 0x0 if OR2_RST_THREE_QUARTER_CLOCK + default 0x8 if OR2_RST_ONE_CLOCK + default 0x0 if OR2_RST_ONE_HALF_CLOCK + +config OR2_CSNT + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_CSNT_NORMAL + default 0x800 if OR2_CSNT_EARLIER + +config OR2_ACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_ACS_SAME_TIME + default 0x400 if OR2_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR2_ACS_HALF_CYCLE_EARLIER + +config OR2_XACS + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_XACS_NORMAL + default 0x100 if OR2_XACS_EXTENDED + +config OR2_SETA + hex + default 0x0 if !BR2_MACHINE_GPCM + default 0x0 if OR2_SETA_INTERNAL + default 0x8 if OR2_SETA_EXTERNAL + +config OR2_TRLX + hex + default 0x0 if OR2_TRLX_NORMAL + default 0x4 if OR2_TRLX_RELAXED + +config OR2_EHTR + hex + default 0x0 if OR2_EHTR_NORMAL + default 0x2 if OR2_EHTR_1_CYCLE + default 0x0 if OR2_EHTR_4_CYCLE + default 0x2 if OR2_EHTR_8_CYCLE + +config OR2_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR2_EAD_NONE + default 0x1 if OR2_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 new file mode 100644 index 0000000000..963831bfcb --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR3_OR3 + bool "ELBC BR3/OR3" + +if ELBC_BR3_OR3 + +config BR3_OR3_NAME + string "Identifier" + +config BR3_OR3_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR3_PORTSIZE_8BIT + bool "8-bit" + +config BR3_PORTSIZE_16BIT + depends on !BR3_MACHINE_FCM + bool "16-bit" + + +config BR3_PORTSIZE_32BIT + depends on !BR3_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR3_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR3_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR3_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR3_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR3_WRITE_PROTECT + bool "Write-protect" + +config BR3_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR3_MACHINE_GPCM + bool "GPCM" + +config BR3_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR3_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR3_MACHINE_UPMA + select BR3_MACHINE_UPM + bool "UPM (A)" + +config BR3_MACHINE_UPMB + select BR3_MACHINE_UPM + bool "UPM (B)" + +config BR3_MACHINE_UPMC + select BR3_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR3_ATOMIC_NONE + bool "No atomic operations" + +config BR3_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR3_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM || BR3_MACHINE_UPM || BR3_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR3_AM_32_KBYTES + depends on !BR3_MACHINE_SDRAM + bool "32 kb" + +config OR3_AM_64_KBYTES + bool "64 kb" + +config OR3_AM_128_KBYTES + bool "128 kb" + +config OR3_AM_256_KBYTES + bool "256 kb" + +config OR3_AM_512_KBYTES + bool "512 kb" + +config OR3_AM_1_MBYTES + bool "1 mb" + +config OR3_AM_2_MBYTES + bool "2 mb" + +config OR3_AM_4_MBYTES + bool "4 mb" + +config OR3_AM_8_MBYTES + bool "8 mb" + +config OR3_AM_16_MBYTES + bool "16 mb" + +config OR3_AM_32_MBYTES + bool "32 mb" + +config OR3_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_256_MBYTES + bool "256 mb" + +config OR3_AM_512_MBYTES + depends on BR3_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR3_AM_1_GBYTES + bool "1 gb" + +config OR3_AM_2_GBYTES + depends on BR3_MACHINE_FCM + bool "2 gb" + +config OR3_AM_4_GBYTES + depends on BR3_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR3_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR3_BCTLD_ASSERTED + bool "Asserted" + +config OR3_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR3_SCY_0 + bool "No wait states" + +config OR3_SCY_1 + bool "1 wait state" + +config OR3_SCY_2 + bool "2 wait states" + +config OR3_SCY_3 + bool "3 wait states" + +config OR3_SCY_4 + bool "4 wait states" + +config OR3_SCY_5 + bool "5 wait states" + +config OR3_SCY_6 + bool "6 wait states" + +config OR3_SCY_7 + bool "7 wait states" + +config OR3_SCY_8 + depends on BR3_MACHINE_GPCM + bool "8 wait states" + +config OR3_SCY_9 + depends on BR3_MACHINE_GPCM + bool "9 wait states" + +config OR3_SCY_10 + depends on BR3_MACHINE_GPCM + bool "10 wait states" + +config OR3_SCY_11 + depends on BR3_MACHINE_GPCM + bool "11 wait states" + +config OR3_SCY_12 + depends on BR3_MACHINE_GPCM + bool "12 wait states" + +config OR3_SCY_13 + depends on BR3_MACHINE_GPCM + bool "13 wait states" + +config OR3_SCY_14 + depends on BR3_MACHINE_GPCM + bool "14 wait states" + +config OR3_SCY_15 + depends on BR3_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR3_MACHINE_GPCM || BR3_MACHINE_FCM + +if BR3_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR3_CSNT_NORMAL + bool "Normal" + +config OR3_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR3_ACS_SAME_TIME + bool "At the same time" + +config OR3_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR3_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR3_XACS_NORMAL + bool "Normal" + +config OR3_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR3_SETA_INTERNAL + bool "Access is terminated internally" + +config OR3_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR3_MACHINE_GPCM + +if BR3_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR3_PGS_SMALL + bool "Small page device" + +config OR3_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR3_CSCT_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 cycle" + +config OR3_CSCT_2_CYCLE + depends on OR3_TRLX_RELAXED + bool "2 cycles" + +config OR3_CSCT_4_CYCLE + depends on OR3_TRLX_NORMAL + bool "4 cycles" + +config OR3_CSCT_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR3_CST_COINCIDENT + depends on OR3_TRLX_NORMAL + bool "Coincident with any command" + +config OR3_CST_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.25 clocks after" + +config OR3_CST_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks after" + +config OR3_CST_ONE_CLOCK + depends on OR3_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR3_CHT_HALF_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.5 clocks before" + +config OR3_CHT_ONE_CLOCK + depends on OR3_TRLX_NORMAL + bool "1 clock before" + +config OR3_CHT_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "1.5 clocks before" + +config OR3_CHT_TWO_CLOCK + depends on OR3_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR3_RST_THREE_QUARTER_CLOCK + depends on OR3_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR3_RST_ONE_HALF_CLOCK + depends on OR3_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR3_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR3_MACHINE_FCM + +if BR3_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR3_BI_BURSTSUPPORT + bool "Support burst access" + +config OR3_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR3_MACHINE_UPM + +if BR3_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR3_COLS_7 + bool "7" + +config OR3_COLS_8 + bool "8" + +config OR3_COLS_9 + bool "9" + +config OR3_COLS_10 + bool "10" + +config OR3_COLS_11 + bool "11" + +config OR3_COLS_12 + bool "12" + +config OR3_COLS_13 + bool "13" + +config OR3_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR3_ROWS_9 + bool "9" + +config OR3_ROWS_10 + bool "10" + +config OR3_ROWS_11 + bool "11" + +config OR3_ROWS_12 + bool "12" + +config OR3_ROWS_13 + bool "13" + +config OR3_ROWS_14 + bool "14" + +config OR3_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR3_PMSEL_BTB + bool "Back-to-back" + +config OR3_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR3_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR3_TRLX_NORMAL + bool "Normal" + +config OR3_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR3_EHTR_NORMAL + depends on OR3_TRLX_NORMAL + bool "Normal" + +config OR3_EHTR_1_CYCLE + depends on OR3_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR3_EHTR_4_CYCLE + depends on OR3_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR3_EHTR_8_CYCLE + depends on OR3_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR3_EAD_NONE + bool "None" + +config OR3_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR3_OR3 + +config BR3_PORTSIZE + hex + default 0x800 if BR3_PORTSIZE_8BIT + default 0x1000 if BR3_PORTSIZE_16BIT + default 0x1800 if BR3_PORTSIZE_32BIT + +config BR3_ERRORCHECKING + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if BR3_ERRORCHECKING_DISABLED + default 0x200 if BR3_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR3_ERRORCHECKING_BOTH + +config BR3_WRITE_PROTECT_BIT + hex + default 0x0 if !BR3_WRITE_PROTECT + default 0x100 if BR3_WRITE_PROTECT + +config BR3_MACHINE + hex + default 0x0 if BR3_MACHINE_GPCM + default 0x20 if BR3_MACHINE_FCM + default 0x60 if BR3_MACHINE_SDRAM + default 0x80 if BR3_MACHINE_UPMA + default 0xa0 if BR3_MACHINE_UPMB + default 0xc0 if BR3_MACHINE_UPMC + +config BR3_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR3_ATOMIC_NONE + default 0x4 if BR3_ATOMIC_RAWA + default 0x8 if BR3_ATOMIC_WARA + +config BR3_VALID_BIT + hex + default 0x0 if !ELBC_BR3_OR3 + default 0x1 if ELBC_BR3_OR3 + +config OR3_AM + hex + default 0xffff8000 if OR3_AM_32_KBYTES && !BR3_MACHINE_SDRAM + default 0xffff0000 if OR3_AM_64_KBYTES + default 0xfffe0000 if OR3_AM_128_KBYTES + default 0xfffc0000 if OR3_AM_256_KBYTES + default 0xfff80000 if OR3_AM_512_KBYTES + default 0xfff00000 if OR3_AM_1_MBYTES + default 0xffe00000 if OR3_AM_2_MBYTES + default 0xffc00000 if OR3_AM_4_MBYTES + default 0xff800000 if OR3_AM_8_MBYTES + default 0xff000000 if OR3_AM_16_MBYTES + default 0xfe000000 if OR3_AM_32_MBYTES + default 0xfc000000 if OR3_AM_64_MBYTES + default 0xf8000000 if OR3_AM_128_MBYTES + default 0xf0000000 if OR3_AM_256_MBYTES + default 0xe0000000 if OR3_AM_512_MBYTES + default 0xc0000000 if OR3_AM_1_GBYTES + default 0x80000000 if OR3_AM_2_GBYTES + default 0x00000000 if OR3_AM_4_GBYTES + +config OR3_XAM + hex + default 0x0 if !OR3_XAM_SET + default 0x6000 if OR3_XAM_SET + +config OR3_BCTLD + hex + default 0x0 if OR3_BCTLD_ASSERTED + default 0x1000 if OR3_BCTLD_NOT_ASSERTED + +config OR3_BI + hex + default 0x0 if !BR3_MACHINE_UPM + default 0x0 if OR3_BI_BURSTSUPPORT + default 0x100 if OR3_BI_BURSTINHIBIT + +config OR3_COLS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_COLS_7 + default 0x400 if OR3_COLS_8 + default 0x800 if OR3_COLS_9 + default 0xc00 if OR3_COLS_10 + default 0x1000 if OR3_COLS_11 + default 0x1400 if OR3_COLS_12 + default 0x1800 if OR3_COLS_13 + default 0x1c00 if OR3_COLS_14 + +config OR3_ROWS + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_ROWS_9 + default 0x40 if OR3_ROWS_10 + default 0x80 if OR3_ROWS_11 + default 0xc0 if OR3_ROWS_12 + default 0x100 if OR3_ROWS_13 + default 0x140 if OR3_ROWS_14 + default 0x180 if OR3_ROWS_15 + +config OR3_PMSEL + hex + default 0x0 if !BR3_MACHINE_SDRAM + default 0x0 if OR3_PMSEL_BTB + default 0x20 if OR3_PMSEL_KEPT_OPEN + +config OR3_SCY + hex + default 0x0 if !BR3_MACHINE_GPCM && !BR3_MACHINE_FCM + default 0x0 if OR3_SCY_0 + default 0x10 if OR3_SCY_1 + default 0x20 if OR3_SCY_2 + default 0x30 if OR3_SCY_3 + default 0x40 if OR3_SCY_4 + default 0x50 if OR3_SCY_5 + default 0x60 if OR3_SCY_6 + default 0x70 if OR3_SCY_7 + default 0x80 if OR3_SCY_8 + default 0x90 if OR3_SCY_9 + default 0xa0 if OR3_SCY_10 + default 0xb0 if OR3_SCY_11 + default 0xc0 if OR3_SCY_12 + default 0xd0 if OR3_SCY_13 + default 0xe0 if OR3_SCY_14 + default 0xf0 if OR3_SCY_15 + +config OR3_PGS + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_PGS_SMALL + default 0x400 if OR3_PGS_LARGE + +config OR3_CSCT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CSCT_1_CYCLE + default 0x0 if OR3_CSCT_2_CYCLE + default 0x200 if OR3_CSCT_4_CYCLE + default 0x200 if OR3_CSCT_8_CYCLE + +config OR3_CST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CST_COINCIDENT + default 0x100 if OR3_CST_QUARTER_CLOCK + default 0x0 if OR3_CST_HALF_CLOCK + default 0x100 if OR3_CST_ONE_CLOCK + +config OR3_CHT + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_CHT_HALF_CLOCK + default 0x80 if OR3_CHT_ONE_CLOCK + default 0x0 if OR3_CHT_ONE_HALF_CLOCK + default 0x80 if OR3_CHT_TWO_CLOCK + +config OR3_RST + hex + default 0x0 if !BR3_MACHINE_FCM + default 0x0 if OR3_RST_THREE_QUARTER_CLOCK + default 0x8 if OR3_RST_ONE_CLOCK + default 0x0 if OR3_RST_ONE_HALF_CLOCK + +config OR3_CSNT + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_CSNT_NORMAL + default 0x800 if OR3_CSNT_EARLIER + +config OR3_ACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_ACS_SAME_TIME + default 0x400 if OR3_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR3_ACS_HALF_CYCLE_EARLIER + +config OR3_XACS + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_XACS_NORMAL + default 0x100 if OR3_XACS_EXTENDED + +config OR3_SETA + hex + default 0x0 if !BR3_MACHINE_GPCM + default 0x0 if OR3_SETA_INTERNAL + default 0x8 if OR3_SETA_EXTERNAL + +config OR3_TRLX + hex + default 0x0 if OR3_TRLX_NORMAL + default 0x4 if OR3_TRLX_RELAXED + +config OR3_EHTR + hex + default 0x0 if OR3_EHTR_NORMAL + default 0x2 if OR3_EHTR_1_CYCLE + default 0x0 if OR3_EHTR_4_CYCLE + default 0x2 if OR3_EHTR_8_CYCLE + +config OR3_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR3_EAD_NONE + default 0x1 if OR3_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 new file mode 100644 index 0000000000..0063dab962 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4 @@ -0,0 +1,733 @@ +menuconfig ELBC_BR4_OR4 + bool "ELBC BR4/OR4" + +if ELBC_BR4_OR4 + +config BR4_OR4_NAME + string "Identifier" + +config BR4_OR4_BASE + hex "Port base" + +choice + prompt "Port size" + +config BR4_PORTSIZE_8BIT + bool "8-bit" + +config BR4_PORTSIZE_16BIT + depends on !BR4_MACHINE_FCM + bool "16-bit" + + +config BR4_PORTSIZE_32BIT + depends on !BR4_MACHINE_FCM + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + bool "32-bit" + +endchoice + +if BR4_MACHINE_FCM + +choice + prompt "Data Error Checking" + +config BR4_ERRORCHECKING_DISABLED + bool "Disabled" + +config BR4_ERRORCHECKING_ECC_CHECKING + bool "ECC checking / No ECC generation" + +config BR4_ERRORCHECKING_BOTH + bool "ECC checking and generation" + +endchoice + +endif + +config BR4_WRITE_PROTECT + bool "Write-protect" + +config BR4_MACHINE_UPM + bool + +choice + prompt "Machine select" + +config BR4_MACHINE_GPCM + bool "GPCM" + +config BR4_MACHINE_FCM + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "FCM" + +config BR4_MACHINE_SDRAM + depends on ARCH_MPC8349 || ARCH_MPC8360 + bool "SDRAM" + +config BR4_MACHINE_UPMA + select BR4_MACHINE_UPM + bool "UPM (A)" + +config BR4_MACHINE_UPMB + select BR4_MACHINE_UPM + bool "UPM (B)" + +config BR4_MACHINE_UPMC + select BR4_MACHINE_UPM + bool "UPM (C)" + +endchoice + +if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360 + +choice + prompt "Atomic operations" + +config BR4_ATOMIC_NONE + bool "No atomic operations" + +config BR4_ATOMIC_RAWA + bool "Read-after-write-atomic" + +config BR4_ATOMIC_WARA + bool "Write-after-read-atomic" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM || BR4_MACHINE_UPM || BR4_MACHINE_SDRAM + +choice + prompt "Address mask" + +config OR4_AM_32_KBYTES + depends on !BR4_MACHINE_SDRAM + bool "32 kb" + +config OR4_AM_64_KBYTES + bool "64 kb" + +config OR4_AM_128_KBYTES + bool "128 kb" + +config OR4_AM_256_KBYTES + bool "256 kb" + +config OR4_AM_512_KBYTES + bool "512 kb" + +config OR4_AM_1_MBYTES + bool "1 mb" + +config OR4_AM_2_MBYTES + bool "2 mb" + +config OR4_AM_4_MBYTES + bool "4 mb" + +config OR4_AM_8_MBYTES + bool "8 mb" + +config OR4_AM_16_MBYTES + bool "16 mb" + +config OR4_AM_32_MBYTES + bool "32 mb" + +config OR4_AM_64_MBYTES + bool "64 mb" + +# XXX: Some boards define 128MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_128_MBYTES + bool "128 mb" + +# XXX: Some boards define 256MB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_256_MBYTES + bool "256 mb" + +config OR4_AM_512_MBYTES + depends on BR4_MACHINE_FCM + bool "512 mb" + +# XXX: Some boards define 1GB AM with GPCM, even though it should not be +# possible according to the manuals +config OR4_AM_1_GBYTES + bool "1 gb" + +config OR4_AM_2_GBYTES + depends on BR4_MACHINE_FCM + bool "2 gb" + +config OR4_AM_4_GBYTES + depends on BR4_MACHINE_FCM + bool "4 gb" + +endchoice + +config OR4_XAM_SET + bool "Set unused bytes after address mask" +choice + prompt "Buffer control disable" + +config OR4_BCTLD_ASSERTED + bool "Asserted" + +config OR4_BCTLD_NOT_ASSERTED + bool "Not asserted" + +endchoice + +endif + +if BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +choice + prompt "Cycle length in bus clocks" + +config OR4_SCY_0 + bool "No wait states" + +config OR4_SCY_1 + bool "1 wait state" + +config OR4_SCY_2 + bool "2 wait states" + +config OR4_SCY_3 + bool "3 wait states" + +config OR4_SCY_4 + bool "4 wait states" + +config OR4_SCY_5 + bool "5 wait states" + +config OR4_SCY_6 + bool "6 wait states" + +config OR4_SCY_7 + bool "7 wait states" + +config OR4_SCY_8 + depends on BR4_MACHINE_GPCM + bool "8 wait states" + +config OR4_SCY_9 + depends on BR4_MACHINE_GPCM + bool "9 wait states" + +config OR4_SCY_10 + depends on BR4_MACHINE_GPCM + bool "10 wait states" + +config OR4_SCY_11 + depends on BR4_MACHINE_GPCM + bool "11 wait states" + +config OR4_SCY_12 + depends on BR4_MACHINE_GPCM + bool "12 wait states" + +config OR4_SCY_13 + depends on BR4_MACHINE_GPCM + bool "13 wait states" + +config OR4_SCY_14 + depends on BR4_MACHINE_GPCM + bool "14 wait states" + +config OR4_SCY_15 + depends on BR4_MACHINE_GPCM + bool "15 wait states" + +endchoice + +endif # BR4_MACHINE_GPCM || BR4_MACHINE_FCM + +if BR4_MACHINE_GPCM + +choice + prompt "Chip select negotiation time" + +config OR4_CSNT_NORMAL + bool "Normal" + +config OR4_CSNT_EARLIER + bool "Earlier" + +endchoice + +choice + prompt "Address to chip-select setup" + +config OR4_ACS_SAME_TIME + bool "At the same time" + +config OR4_ACS_HALF_CYCLE_EARLIER + bool "Half of a bus clock cycle earlier" + +config OR4_ACS_QUARTER_CYCLE_EARLIER + bool "Half/Quarter of a bus clock cycle earlier" + +endchoice + +choice + prompt "Extra address to check-select setup" + +config OR4_XACS_NORMAL + bool "Normal" + +config OR4_XACS_EXTENDED + bool "Extended" + +endchoice + +choice + prompt "External address termination" + +config OR4_SETA_INTERNAL + bool "Access is terminated internally" + +config OR4_SETA_EXTERNAL + bool "Access is terminated externally" + +endchoice + +endif # BR4_MACHINE_GPCM + +if BR4_MACHINE_FCM + +choice + prompt "NAND Flash EEPROM page size" + +config OR4_PGS_SMALL + bool "Small page device" + +config OR4_PGS_LARGE + bool "Large page device" + +endchoice + +choice + prompt "Chip select to command time" + +config OR4_CSCT_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 cycle" + +config OR4_CSCT_2_CYCLE + depends on OR4_TRLX_RELAXED + bool "2 cycles" + +config OR4_CSCT_4_CYCLE + depends on OR4_TRLX_NORMAL + bool "4 cycles" + +config OR4_CSCT_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 cycles" + +endchoice + +choice + prompt "Command setup time" + +config OR4_CST_COINCIDENT + depends on OR4_TRLX_NORMAL + bool "Coincident with any command" + +config OR4_CST_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.25 clocks after" + +config OR4_CST_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks after" + +config OR4_CST_ONE_CLOCK + depends on OR4_TRLX_RELAXED + bool "1 clock after" + +endchoice + +choice + prompt "Command hold time" + +config OR4_CHT_HALF_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.5 clocks before" + +config OR4_CHT_ONE_CLOCK + depends on OR4_TRLX_NORMAL + bool "1 clock before" + +config OR4_CHT_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "1.5 clocks before" + +config OR4_CHT_TWO_CLOCK + depends on OR4_TRLX_RELAXED + bool "2 clocks before" + +endchoice + +choice + prompt "Reset setup time" + +config OR4_RST_THREE_QUARTER_CLOCK + depends on OR4_TRLX_NORMAL + bool "0.75 clocks prior" + +config OR4_RST_ONE_HALF_CLOCK + depends on OR4_TRLX_RELAXED + bool "0.5 clocks prior" + +config OR4_RST_ONE_CLOCK + bool "1 clock prior" + +endchoice + +endif # BR4_MACHINE_FCM + +if BR4_MACHINE_UPM + +choice + prompt "Burst inhibit" + +config OR4_BI_BURSTSUPPORT + bool "Support burst access" + +config OR4_BI_BURSTINHIBIT + bool "Inhibit burst access" + +endchoice + +endif # BR4_MACHINE_UPM + +if BR4_MACHINE_SDRAM + +choice + prompt "Number of column address lines" + +config OR4_COLS_7 + bool "7" + +config OR4_COLS_8 + bool "8" + +config OR4_COLS_9 + bool "9" + +config OR4_COLS_10 + bool "10" + +config OR4_COLS_11 + bool "11" + +config OR4_COLS_12 + bool "12" + +config OR4_COLS_13 + bool "13" + +config OR4_COLS_14 + bool "14" + +endchoice + +choice + prompt "Number of rows address lines" + +config OR4_ROWS_9 + bool "9" + +config OR4_ROWS_10 + bool "10" + +config OR4_ROWS_11 + bool "11" + +config OR4_ROWS_12 + bool "12" + +config OR4_ROWS_13 + bool "13" + +config OR4_ROWS_14 + bool "14" + +config OR4_ROWS_15 + bool "15" + +endchoice + +choice + prompt "Page mode select" + +config OR4_PMSEL_BTB + bool "Back-to-back" + +config OR4_PMSEL_KEPT_OPEN + bool "Page kept open until page miss or refresh" + +endchoice + +endif # BR4_MACHINE_SDRAM + +choice + prompt "Relaxed timing" + +config OR4_TRLX_NORMAL + bool "Normal" + +config OR4_TRLX_RELAXED + bool "Relaxed" + +endchoice + +choice + prompt "Extended hold time" + +config OR4_EHTR_NORMAL + depends on OR4_TRLX_NORMAL + bool "Normal" + +config OR4_EHTR_1_CYCLE + depends on OR4_TRLX_NORMAL + bool "1 idle clock cycle inserted" + +config OR4_EHTR_4_CYCLE + depends on OR4_TRLX_RELAXED + bool "4 idle clock cycles inserted" + +config OR4_EHTR_8_CYCLE + depends on OR4_TRLX_RELAXED + bool "8 idle clock cycles inserted" + +endchoice + +if !ARCH_MPC8308 + +choice + prompt "External address latch delay" + +config OR4_EAD_NONE + bool "None" + +config OR4_EAD_EXTRA + bool "Extra" + +endchoice + +endif # !ARCH_MPC8308 + +endif # ELBC_BR4_OR4 + +config BR4_PORTSIZE + hex + default 0x800 if BR4_PORTSIZE_8BIT + default 0x1000 if BR4_PORTSIZE_16BIT + default 0x1800 if BR4_PORTSIZE_32BIT + +config BR4_ERRORCHECKING + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if BR4_ERRORCHECKING_DISABLED + default 0x200 if BR4_ERRORCHECKING_ECC_CHECKING + default 0x400 if BR4_ERRORCHECKING_BOTH + +config BR4_WRITE_PROTECT_BIT + hex + default 0x0 if !BR4_WRITE_PROTECT + default 0x100 if BR4_WRITE_PROTECT + +config BR4_MACHINE + hex + default 0x0 if BR4_MACHINE_GPCM + default 0x20 if BR4_MACHINE_FCM + default 0x60 if BR4_MACHINE_SDRAM + default 0x80 if BR4_MACHINE_UPMA + default 0xa0 if BR4_MACHINE_UPMB + default 0xc0 if BR4_MACHINE_UPMC + +config BR4_ATOMIC + hex + default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360 + default 0x0 if BR4_ATOMIC_NONE + default 0x4 if BR4_ATOMIC_RAWA + default 0x8 if BR4_ATOMIC_WARA + +config BR4_VALID_BIT + hex + default 0x0 if !ELBC_BR4_OR4 + default 0x1 if ELBC_BR4_OR4 + +config OR4_AM + hex + default 0xffff8000 if OR4_AM_32_KBYTES && !BR4_MACHINE_SDRAM + default 0xffff0000 if OR4_AM_64_KBYTES + default 0xfffe0000 if OR4_AM_128_KBYTES + default 0xfffc0000 if OR4_AM_256_KBYTES + default 0xfff80000 if OR4_AM_512_KBYTES + default 0xfff00000 if OR4_AM_1_MBYTES + default 0xffe00000 if OR4_AM_2_MBYTES + default 0xffc00000 if OR4_AM_4_MBYTES + default 0xff800000 if OR4_AM_8_MBYTES + default 0xff000000 if OR4_AM_16_MBYTES + default 0xfe000000 if OR4_AM_32_MBYTES + default 0xfc000000 if OR4_AM_64_MBYTES + default 0xf8000000 if OR4_AM_128_MBYTES + default 0xf0000000 if OR4_AM_256_MBYTES + default 0xe0000000 if OR4_AM_512_MBYTES + default 0xc0000000 if OR4_AM_1_GBYTES + default 0x80000000 if OR4_AM_2_GBYTES + default 0x00000000 if OR4_AM_4_GBYTES + +config OR4_XAM + hex + default 0x0 if !OR4_XAM_SET + default 0x6000 if OR4_XAM_SET + +config OR4_BCTLD + hex + default 0x0 if OR4_BCTLD_ASSERTED + default 0x1000 if OR4_BCTLD_NOT_ASSERTED + +config OR4_BI + hex + default 0x0 if !BR4_MACHINE_UPM + default 0x0 if OR4_BI_BURSTSUPPORT + default 0x100 if OR4_BI_BURSTINHIBIT + +config OR4_COLS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_COLS_7 + default 0x400 if OR4_COLS_8 + default 0x800 if OR4_COLS_9 + default 0xc00 if OR4_COLS_10 + default 0x1000 if OR4_COLS_11 + default 0x1400 if OR4_COLS_12 + default 0x1800 if OR4_COLS_13 + default 0x1c00 if OR4_COLS_14 + +config OR4_ROWS + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_ROWS_9 + default 0x40 if OR4_ROWS_10 + default 0x80 if OR4_ROWS_11 + default 0xc0 if OR4_ROWS_12 + default 0x100 if OR4_ROWS_13 + default 0x140 if OR4_ROWS_14 + default 0x180 if OR4_ROWS_15 + +config OR4_PMSEL + hex + default 0x0 if !BR4_MACHINE_SDRAM + default 0x0 if OR4_PMSEL_BTB + default 0x20 if OR4_PMSEL_KEPT_OPEN + +config OR4_SCY + hex + default 0x0 if !BR4_MACHINE_GPCM && !BR4_MACHINE_FCM + default 0x0 if OR4_SCY_0 + default 0x10 if OR4_SCY_1 + default 0x20 if OR4_SCY_2 + default 0x30 if OR4_SCY_3 + default 0x40 if OR4_SCY_4 + default 0x50 if OR4_SCY_5 + default 0x60 if OR4_SCY_6 + default 0x70 if OR4_SCY_7 + default 0x80 if OR4_SCY_8 + default 0x90 if OR4_SCY_9 + default 0xa0 if OR4_SCY_10 + default 0xb0 if OR4_SCY_11 + default 0xc0 if OR4_SCY_12 + default 0xd0 if OR4_SCY_13 + default 0xe0 if OR4_SCY_14 + default 0xf0 if OR4_SCY_15 + +config OR4_PGS + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_PGS_SMALL + default 0x400 if OR4_PGS_LARGE + +config OR4_CSCT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CSCT_1_CYCLE + default 0x0 if OR4_CSCT_2_CYCLE + default 0x200 if OR4_CSCT_4_CYCLE + default 0x200 if OR4_CSCT_8_CYCLE + +config OR4_CST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CST_COINCIDENT + default 0x100 if OR4_CST_QUARTER_CLOCK + default 0x0 if OR4_CST_HALF_CLOCK + default 0x100 if OR4_CST_ONE_CLOCK + +config OR4_CHT + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_CHT_HALF_CLOCK + default 0x80 if OR4_CHT_ONE_CLOCK + default 0x0 if OR4_CHT_ONE_HALF_CLOCK + default 0x80 if OR4_CHT_TWO_CLOCK + +config OR4_RST + hex + default 0x0 if !BR4_MACHINE_FCM + default 0x0 if OR4_RST_THREE_QUARTER_CLOCK + default 0x8 if OR4_RST_ONE_CLOCK + default 0x0 if OR4_RST_ONE_HALF_CLOCK + +config OR4_CSNT + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_CSNT_NORMAL + default 0x800 if OR4_CSNT_EARLIER + +config OR4_ACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_ACS_SAME_TIME + default 0x400 if OR4_ACS_QUARTER_CYCLE_EARLIER + default 0x600 if OR4_ACS_HALF_CYCLE_EARLIER + +config OR4_XACS + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_XACS_NORMAL + default 0x100 if OR4_XACS_EXTENDED + +config OR4_SETA + hex + default 0x0 if !BR4_MACHINE_GPCM + default 0x0 if OR4_SETA_INTERNAL + default 0x8 if OR4_SETA_EXTERNAL + +config OR4_TRLX + hex + default 0x0 if OR4_TRLX_NORMAL + default 0x4 if OR4_TRLX_RELAXED + +config OR4_EHTR + hex + default 0x0 if OR4_EHTR_NORMAL + default 0x2 if OR4_EHTR_1_CYCLE + default 0x0 if OR4_EHTR_4_CYCLE + default 0x2 if OR4_EHTR_8_CYCLE + +config OR4_EAD + hex + default 0x0 if ARCH_MPC8308 + default 0x0 if OR4_EAD_NONE + default 0x1 if OR4_EAD_EXTRA diff --git a/arch/powerpc/cpu/mpc83xx/elbc/elbc.h b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h new file mode 100644 index 0000000000..245fe7c6fb --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/elbc/elbc.h @@ -0,0 +1,186 @@ +#ifdef CONFIG_ELBC_BR0_OR0 +#define CONFIG_SYS_BR0_PRELIM (\ + CONFIG_BR0_OR0_BASE |\ + CONFIG_BR0_PORTSIZE |\ + CONFIG_BR0_ERRORCHECKING |\ + CONFIG_BR0_WRITE_PROTECT_BIT |\ + CONFIG_BR0_MACHINE |\ + CONFIG_BR0_ATOMIC |\ + CONFIG_BR0_VALID_BIT \ +) +#define CONFIG_SYS_OR0_PRELIM (\ + CONFIG_OR0_AM |\ + CONFIG_OR0_XAM |\ + CONFIG_OR0_BCTLD |\ + CONFIG_OR0_BI |\ + CONFIG_OR0_COLS |\ + CONFIG_OR0_ROWS |\ + CONFIG_OR0_PMSEL |\ + CONFIG_OR0_SCY |\ + CONFIG_OR0_PGS |\ + CONFIG_OR0_CSCT |\ + CONFIG_OR0_CST |\ + CONFIG_OR0_CHT |\ + CONFIG_OR0_RST |\ + CONFIG_OR0_CSNT |\ + CONFIG_OR0_ACS |\ + CONFIG_OR0_XACS |\ + CONFIG_OR0_SETA |\ + CONFIG_OR0_TRLX |\ + CONFIG_OR0_EHTR |\ + CONFIG_OR0_EAD \ +) +#endif /* CONFIG_ELBC_BR0_OR0 */ + +#ifdef CONFIG_ELBC_BR1_OR1 +#define CONFIG_SYS_BR1_PRELIM (\ + CONFIG_BR1_OR1_BASE |\ + CONFIG_BR1_PORTSIZE |\ + CONFIG_BR1_ERRORCHECKING |\ + CONFIG_BR1_WRITE_PROTECT_BIT |\ + CONFIG_BR1_MACHINE |\ + CONFIG_BR1_ATOMIC |\ + CONFIG_BR1_VALID_BIT \ +) +#define CONFIG_SYS_OR1_PRELIM (\ + CONFIG_OR1_AM |\ + CONFIG_OR1_XAM |\ + CONFIG_OR1_BCTLD |\ + CONFIG_OR1_BI |\ + CONFIG_OR1_COLS |\ + CONFIG_OR1_ROWS |\ + CONFIG_OR1_PMSEL |\ + CONFIG_OR1_SCY |\ + CONFIG_OR1_PGS |\ + CONFIG_OR1_CSCT |\ + CONFIG_OR1_CST |\ + CONFIG_OR1_CHT |\ + CONFIG_OR1_RST |\ + CONFIG_OR1_CSNT |\ + CONFIG_OR1_ACS |\ + CONFIG_OR1_XACS |\ + CONFIG_OR1_SETA |\ + CONFIG_OR1_TRLX |\ + CONFIG_OR1_EHTR |\ + CONFIG_OR1_EAD \ +) +#endif /* CONFIG_ELBC_BR1_OR1 */ + +#ifdef CONFIG_ELBC_BR2_OR2 +#define CONFIG_SYS_BR2_PRELIM (\ + CONFIG_BR2_OR2_BASE |\ + CONFIG_BR2_PORTSIZE |\ + CONFIG_BR2_ERRORCHECKING |\ + CONFIG_BR2_WRITE_PROTECT_BIT |\ + CONFIG_BR2_MACHINE |\ + CONFIG_BR2_ATOMIC |\ + CONFIG_BR2_VALID_BIT \ +) +#define CONFIG_SYS_OR2_PRELIM (\ + CONFIG_OR2_AM |\ + CONFIG_OR2_XAM |\ + CONFIG_OR2_BCTLD |\ + CONFIG_OR2_BI |\ + CONFIG_OR2_COLS |\ + CONFIG_OR2_ROWS |\ + CONFIG_OR2_PMSEL |\ + CONFIG_OR2_SCY |\ + CONFIG_OR2_PGS |\ + CONFIG_OR2_CSCT |\ + CONFIG_OR2_CST |\ + CONFIG_OR2_CHT |\ + CONFIG_OR2_RST |\ + CONFIG_OR2_CSNT |\ + CONFIG_OR2_ACS |\ + CONFIG_OR2_XACS |\ + CONFIG_OR2_SETA |\ + CONFIG_OR2_TRLX |\ + CONFIG_OR2_EHTR |\ + CONFIG_OR2_EAD \ +) +#endif /* CONFIG_ELBC_BR2_OR2 */ + +#ifdef CONFIG_ELBC_BR3_OR3 +#define CONFIG_SYS_BR3_PRELIM (\ + CONFIG_BR3_OR3_BASE |\ + CONFIG_BR3_PORTSIZE |\ + CONFIG_BR3_ERRORCHECKING |\ + CONFIG_BR3_WRITE_PROTECT_BIT |\ + CONFIG_BR3_MACHINE |\ + CONFIG_BR3_ATOMIC |\ + CONFIG_BR3_VALID_BIT \ +) +#define CONFIG_SYS_OR3_PRELIM (\ + CONFIG_OR3_AM |\ + CONFIG_OR3_XAM |\ + CONFIG_OR3_BCTLD |\ + CONFIG_OR3_BI |\ + CONFIG_OR3_COLS |\ + CONFIG_OR3_ROWS |\ + CONFIG_OR3_PMSEL |\ + CONFIG_OR3_SCY |\ + CONFIG_OR3_PGS |\ + CONFIG_OR3_CSCT |\ + CONFIG_OR3_CST |\ + CONFIG_OR3_CHT |\ + CONFIG_OR3_RST |\ + CONFIG_OR3_CSNT |\ + CONFIG_OR3_ACS |\ + CONFIG_OR3_XACS |\ + CONFIG_OR3_SETA |\ + CONFIG_OR3_TRLX |\ + CONFIG_OR3_EHTR |\ + CONFIG_OR3_EAD \ +) +#endif /* CONFIG_ELBC_BR3_OR3 */ + +#ifdef CONFIG_ELBC_BR4_OR4 +#define CONFIG_SYS_BR4_PRELIM (\ + CONFIG_BR4_OR4_BASE |\ + CONFIG_BR4_PORTSIZE |\ + CONFIG_BR4_ERRORCHECKING |\ + CONFIG_BR4_WRITE_PROTECT_BIT |\ + CONFIG_BR4_MACHINE |\ + CONFIG_BR4_ATOMIC |\ + CONFIG_BR4_VALID_BIT \ +) +#define CONFIG_SYS_OR4_PRELIM (\ + CONFIG_OR4_AM |\ + CONFIG_OR4_XAM |\ + CONFIG_OR4_BCTLD |\ + CONFIG_OR4_BI |\ + CONFIG_OR4_COLS |\ + CONFIG_OR4_ROWS |\ + CONFIG_OR4_PMSEL |\ + CONFIG_OR4_SCY |\ + CONFIG_OR4_PGS |\ + CONFIG_OR4_CSCT |\ + CONFIG_OR4_CST |\ + CONFIG_OR4_CHT |\ + CONFIG_OR4_RST |\ + CONFIG_OR4_CSNT |\ + CONFIG_OR4_ACS |\ + CONFIG_OR4_XACS |\ + CONFIG_OR4_SETA |\ + CONFIG_OR4_TRLX |\ + CONFIG_OR4_EHTR |\ + CONFIG_OR4_EAD \ +) +#endif /* CONFIG_ELBC_BR4_OR4 */ + +#if defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_0) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_1) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_2) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR2_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR2_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_3) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR3_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR3_PRELIM +#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_4) +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR4_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR4_PRELIM +#endif diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c index 0ecafd708f..b487e31cc0 100644 --- a/arch/powerpc/cpu/mpc83xx/fdt.c +++ b/arch/powerpc/cpu/mpc83xx/fdt.c @@ -16,7 +16,7 @@ extern void ft_qe_setup(void *blob); DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_BOOTCOUNT_LIMIT) && \ - (defined(CONFIG_QE) && !defined(CONFIG_MPC831x)) + (defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X)) #include <linux/immap_qe.h> void fdt_fixup_muram (void *blob) @@ -52,7 +52,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\ defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5) -#ifdef CONFIG_MPC8313 +#ifdef CONFIG_ARCH_MPC8313 /* * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1 * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers, @@ -116,14 +116,14 @@ void ft_cpu_setup(void *blob, bd_t *bd) #endif #ifdef CONFIG_SYS_NS16550 - do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); + do_fixup_by_compat_u32(blob, "ns16550", + "clock-frequency", get_serial_clock(), 1); #endif fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #if defined(CONFIG_BOOTCOUNT_LIMIT) && \ - (defined(CONFIG_QE) && !defined(CONFIG_MPC831x)) + (defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X)) fdt_fixup_muram (blob); #endif } diff --git a/arch/powerpc/cpu/mpc83xx/hid/Kconfig b/arch/powerpc/cpu/mpc83xx/hid/Kconfig new file mode 100644 index 0000000000..c367ad2ce1 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/hid/Kconfig @@ -0,0 +1,565 @@ +menu "HID setup" + +menu "HID0 initial" + +config HID0_INIT_EMCP + bool "Enable machine check int on mcp" + +config HID0_INIT_ECPE + bool "Enable cache parity errors" + +config HID0_INIT_EBA + bool "Enable address parity checking" + +config HID0_INIT_EBD + bool "Enable data parity checking" + +choice + prompt "HID0 clock configuration" + +config HID0_INIT_CLKOUT_OFF + bool "Clock output off" + +config HID0_INIT_CLKOUT_CORE_HALF + bool "Core clock / 2" + +config HID0_INIT_CLKOUT_CORE + bool "Core clock" + +config HID0_INIT_CLKOUT_BUS + bool "Bus clock" + +endchoice + +config HID0_INIT_PAR + bool "Disable precharge of artry_out" + +config HID0_INIT_DOZE + bool "Enable doze mode" + +config HID0_INIT_NAP + bool "Enable nap mode" + +config HID0_INIT_SLEEP + bool "Enable sleep mode" + +config HID0_INIT_DPM + bool "Enable dynamic power management" + +config HID0_INIT_ICE + bool "Enable instruction cache" + +config HID0_INIT_DCE + bool "Enable data cache" + +config HID0_INIT_ILOCK + bool "Lock instruction cache" + +config HID0_INIT_DLOCK + bool "Lock data cache" + +config HID0_INIT_ICFI + bool "Flash invalidate instruction cache" + +config HID0_INIT_DCFI + bool "Flash invalidate data cache" + +config HID0_INIT_IFEM + bool "Enable m bit on bus for instruction fetches" + +config HID0_INIT_DECAREN + bool "Decrementer auto reload" + +config HID0_INIT_FBIOB + bool "Force indirect branch on the bus" + +config HID0_INIT_ABE + bool "Enable address broadcast" + +config HID0_INIT_NOOPTI + bool "No-op data cache touch intructions" + +endmenu + +menu "HID0 final" + +config HID0_FINAL_EMCP + bool "Enable machine check int on mcp" + +config HID0_FINAL_ECPE + bool "Enable cache parity errors" + +config HID0_FINAL_EBA + bool "Enable address parity checking" + +config HID0_FINAL_EBD + bool "Enable data parity checking" + +choice + prompt "HID0 clock configuration" + +config HID0_FINAL_CLKOUT_OFF + bool "Clock output off" + +config HID0_FINAL_CLKOUT_CORE_HALF + bool "Core clock / 2" + +config HID0_FINAL_CLKOUT_CORE + bool "Core clock" + +config HID0_FINAL_CLKOUT_BUS + bool "Bus clock" + +endchoice + +config HID0_FINAL_PAR + bool "Disable precharge of artry_out" + +config HID0_FINAL_DOZE + bool "Enable doze mode" + +config HID0_FINAL_NAP + bool "Enable nap mode" + +config HID0_FINAL_SLEEP + bool "Enable sleep mode" + +config HID0_FINAL_DPM + bool "Enable dynamic power management" + +config HID0_FINAL_ICE + bool "Enable instruction cache" + +config HID0_FINAL_DCE + bool "Enable data cache" + +config HID0_FINAL_ILOCK + bool "Lock instruction cache" + +config HID0_FINAL_DLOCK + bool "Lock data cache" + +config HID0_FINAL_ICFI + bool "Flash invalidate instruction cache" + +config HID0_FINAL_DCFI + bool "Flash invalidate data cache" + +config HID0_FINAL_IFEM + bool "Enable m bit on bus for instruction fetches" + +config HID0_FINAL_DECAREN + bool "Decrementer auto reload" + +config HID0_FINAL_FBIOB + bool "Force indirect branch on the bus" + +config HID0_FINAL_ABE + bool "Enable address broadcast" + +config HID0_FINAL_NOOPTI + bool "No-op data cache touch intructions" + +endmenu + +config HID0_INIT_EMCP_BIT + hex + default 0x0 if !HID0_INIT_EMCP + default 0x80000000 if HID0_INIT_EMCP + +config HID0_INIT_ECPE_BIT + hex + default 0x0 if !HID0_INIT_ECPE + default 0x40000000 if HID0_INIT_ECPE + +config HID0_INIT_EBA_BIT + hex + default 0x0 if !HID0_INIT_EBA + default 0x20000000 if HID0_INIT_EBA + +config HID0_INIT_EBD_BIT + hex + default 0x0 if !HID0_INIT_EBD + default 0x10000000 if HID0_INIT_EBD + +config HID0_INIT_CLKOUT + hex + default 0x0 if HID0_INIT_CLKOUT_OFF + default 0x8000000 if HID0_INIT_CLKOUT_CORE_HALF + default 0x2000000 if HID0_INIT_CLKOUT_CORE + default 0xa000000 if HID0_INIT_CLKOUT_BUS + +config HID0_INIT_PAR_BIT + hex + default 0x0 if !HID0_INIT_PAR + default 0x1000000 if HID0_INIT_PAR + +config HID0_INIT_DOZE_BIT + hex + default 0x0 if !HID0_INIT_DOZE + default 0x800000 if HID0_INIT_DOZE + +config HID0_INIT_NAP_BIT + hex + default 0x0 if !HID0_INIT_NAP + default 0x400000 if HID0_INIT_NAP + +config HID0_INIT_SLEEP_BIT + hex + default 0x0 if !HID0_INIT_SLEEP + default 0x200000 if HID0_INIT_SLEEP + +config HID0_INIT_DPM_BIT + hex + default 0x0 if !HID0_INIT_DPM + default 0x100000 if HID0_INIT_DPM + +config HID0_INIT_ICE_BIT + hex + default 0x0 if !HID0_INIT_ICE + default 0x8000 if HID0_INIT_ICE + +config HID0_INIT_DCE_BIT + hex + default 0x0 if !HID0_INIT_DCE + default 0x4000 if HID0_INIT_DCE + +config HID0_INIT_ILOCK_BIT + hex + default 0x0 if !HID0_INIT_ILOCK + default 0x2000 if HID0_INIT_ILOCK + +config HID0_INIT_DLOCK_BIT + hex + default 0x0 if !HID0_INIT_DLOCK + default 0x1000 if HID0_INIT_DLOCK + +config HID0_INIT_ICFI_BIT + hex + default 0x0 if !HID0_INIT_ICFI + default 0x800 if HID0_INIT_ICFI + +config HID0_INIT_DCFI_BIT + hex + default 0x0 if !HID0_INIT_DCFI + default 0x400 if HID0_INIT_DCFI + +config HID0_INIT_IFEM_BIT + hex + default 0x0 if !HID0_INIT_IFEM + default 0x80 if HID0_INIT_IFEM + +config HID0_INIT_DECAREN_BIT + hex + default 0x0 if !HID0_INIT_DECAREN + default 0x40 if HID0_INIT_DECAREN + +config HID0_INIT_FBIOB_BIT + hex + default 0x0 if !HID0_INIT_FBIOB + default 0x10 if HID0_INIT_FBIOB + +config HID0_INIT_ABE_BIT + hex + default 0x0 if !HID0_INIT_ABE + default 0x8 if HID0_INIT_ABE + +config HID0_INIT_NOOPTI_BIT + hex + default 0x0 if !HID0_INIT_NOOPTI + default 0x1 if HID0_INIT_NOOPTI + +config HID0_FINAL_EMCP_BIT + hex + default 0x0 if !HID0_FINAL_EMCP + default 0x80000000 if HID0_FINAL_EMCP + +config HID0_FINAL_ECPE_BIT + hex + default 0x0 if !HID0_FINAL_ECPE + default 0x40000000 if HID0_FINAL_ECPE + +config HID0_FINAL_EBA_BIT + hex + default 0x0 if !HID0_FINAL_EBA + default 0x20000000 if HID0_FINAL_EBA + +config HID0_FINAL_EBD_BIT + hex + default 0x0 if !HID0_FINAL_EBD + default 0x10000000 if HID0_FINAL_EBD + +config HID0_FINAL_CLKOUT + hex + default 0x0 if HID0_FINAL_CLKOUT_OFF + default 0x8000000 if HID0_FINAL_CLKOUT_CORE_HALF + default 0x2000000 if HID0_FINAL_CLKOUT_CORE + default 0xa000000 if HID0_FINAL_CLKOUT_BUS + +config HID0_FINAL_SBCLK_BIT + hex + default 0x0 if !HID0_FINAL_SBCLK + default 0x8000000 if HID0_FINAL_SBCLK + +config HID0_FINAL_ECLK_BIT + hex + default 0x0 if !HID0_FINAL_ECLK + default 0x2000000 if HID0_FINAL_ECLK + +config HID0_FINAL_PAR_BIT + hex + default 0x0 if !HID0_FINAL_PAR + default 0x1000000 if HID0_FINAL_PAR + +config HID0_FINAL_DOZE_BIT + hex + default 0x0 if !HID0_FINAL_DOZE + default 0x800000 if HID0_FINAL_DOZE + +config HID0_FINAL_NAP_BIT + hex + default 0x0 if !HID0_FINAL_NAP + default 0x400000 if HID0_FINAL_NAP + +config HID0_FINAL_SLEEP_BIT + hex + default 0x0 if !HID0_FINAL_SLEEP + default 0x200000 if HID0_FINAL_SLEEP + +config HID0_FINAL_DPM_BIT + hex + default 0x0 if !HID0_FINAL_DPM + default 0x100000 if HID0_FINAL_DPM + +config HID0_FINAL_ICE_BIT + hex + default 0x0 if !HID0_FINAL_ICE + default 0x8000 if HID0_FINAL_ICE + +config HID0_FINAL_DCE_BIT + hex + default 0x0 if !HID0_FINAL_DCE + default 0x4000 if HID0_FINAL_DCE + +config HID0_FINAL_ILOCK_BIT + hex + default 0x0 if !HID0_FINAL_ILOCK + default 0x2000 if HID0_FINAL_ILOCK + +config HID0_FINAL_DLOCK_BIT + hex + default 0x0 if !HID0_FINAL_DLOCK + default 0x1000 if HID0_FINAL_DLOCK + +config HID0_FINAL_ICFI_BIT + hex + default 0x0 if !HID0_FINAL_ICFI + default 0x800 if HID0_FINAL_ICFI + +config HID0_FINAL_DCFI_BIT + hex + default 0x0 if !HID0_FINAL_DCFI + default 0x400 if HID0_FINAL_DCFI + +config HID0_FINAL_IFEM_BIT + hex + default 0x0 if !HID0_FINAL_IFEM + default 0x80 if HID0_FINAL_IFEM + +config HID0_FINAL_DECAREN_BIT + hex + default 0x0 if !HID0_FINAL_DECAREN + default 0x40 if HID0_FINAL_DECAREN + +config HID0_FINAL_FBIOB_BIT + hex + default 0x0 if !HID0_FINAL_FBIOB + default 0x10 if HID0_FINAL_FBIOB + +config HID0_FINAL_ABE_BIT + hex + default 0x0 if !HID0_FINAL_ABE + default 0x8 if HID0_FINAL_ABE + +config HID0_FINAL_NOOPTI_BIT + hex + default 0x0 if !HID0_FINAL_NOOPTI + default 0x1 if HID0_FINAL_NOOPTI + +menu "HID2" + +config HID2_LET + bool "True little-endian mode" + +config HID2_IFEB + bool "Instruction fetch burst extension" + +config HID2_MESISTATE + bool "MESI state enable" + +config HID2_IFEC + bool "Instruction fetch cancel extension" + +config HID2_EBQS + bool "BIU queue sharing" + +config HID2_EBPX + bool "BIU pipeline extension" + +if !ARCH_MPC8360 + +config HID2_ELRW + bool "Weighted LRU" + +config HID2_NOKS + bool "No kill for snoop" + +endif + +config HID2_HBE + bool "High bat enable" + +choice + prompt "Instruction cache way-lock" + +config HID2_IWLCK_NONE + bool "No ways locked" + +config HID2_IWLCK_0 + bool "Way 0 locked" + +config HID2_IWLCK_1 + bool "Way 0 through 1 locked" + +config HID2_IWLCK_2 + bool "Way 0 through 2 locked" + +if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + +config HID2_IWLCK_3 + bool "Way 0 through 3 locked" + +config HID2_IWLCK_4 + bool "Way 0 through 4 locked" + +config HID2_IWLCK_5 + bool "Way 0 through 5 locked" + +config HID2_IWLCK_6 + bool "Way 0 through 6 locked" + +endif + +endchoice + +config HID2_ICWP + bool "Instruction cache way protection" + +choice + prompt "Data cache way-lock" + +config HID2_DWLCK_NONE + bool "No ways locked" + +config HID2_DWLCK_0 + bool "Way 0 locked" + +config HID2_DWLCK_1 + bool "Way 0 through 1 locked" + +config HID2_DWLCK_2 + bool "Way 0 through 2 locked" + +if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379 + +config HID2_DWLCK_3 + bool "Way 0 through 3 locked" + +config HID2_DWLCK_4 + bool "Way 0 through 4 locked" + +config HID2_DWLCK_5 + bool "Way 0 through 5 locked" + +config HID2_DWLCK_6 + bool "Way 0 through 6 locked" + +endif + +endchoice + +config HID2_LET_BIT + hex + default 0x0 if !HID2_LET + default 0x8000000 if HID2_LET + +config HID2_IFEB_BIT + hex + default 0x0 if !HID2_IFEB + default 0x4000000 if HID2_IFEB + +config HID2_MESISTATE_BIT + hex + default 0x0 if !HID2_MESISTATE + default 0x1000000 if HID2_MESISTATE + +config HID2_IFEC_BIT + hex + default 0x0 if !HID2_IFEC + default 0x800000 if HID2_IFEC + +config HID2_EBQS_BIT + hex + default 0x0 if !HID2_EBQS + default 0x400000 if HID2_EBQS + +config HID2_EBPX_BIT + hex + default 0x0 if !HID2_EBPX + default 0x200000 if HID2_EBPX + +config HID2_ELRW_BIT + hex + default 0x0 if !HID2_ELRW + default 0x100000 if HID2_ELRW + +config HID2_NOKS_BIT + hex + default 0x0 if !HID2_NOKS + default 0x80000 if HID2_NOKS + +config HID2_HBE_BIT + hex + default 0x0 if !HID2_HBE + default 0x40000 if HID2_HBE + +config HID2_IWLCK + hex + default 0x0 if HID2_IWLCK_NONE + default 0x2000 if HID2_IWLCK_0 + default 0x4000 if HID2_IWLCK_1 + default 0x6000 if HID2_IWLCK_2 + default 0x8000 if HID2_IWLCK_3 + default 0xA000 if HID2_IWLCK_4 + default 0xC000 if HID2_IWLCK_5 + default 0xE000 if HID2_IWLCK_6 + +config HID2_ICWP_BIT + hex + default 0x0 if !HID2_ICWP + default 0x1000 if HID2_ICWP + +config HID2_DWLCK + hex + default 0x0 if HID2_DWLCK_NONE + default 0x20 if HID2_DWLCK_0 + default 0x40 if HID2_DWLCK_1 + default 0x60 if HID2_DWLCK_2 + default 0x80 if HID2_DWLCK_3 + default 0xA0 if HID2_DWLCK_4 + default 0xC0 if HID2_DWLCK_5 + default 0xE0 if HID2_DWLCK_6 + +endmenu + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/hid/hid.h b/arch/powerpc/cpu/mpc83xx/hid/hid.h new file mode 100644 index 0000000000..9f5260c012 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/hid/hid.h @@ -0,0 +1,72 @@ +#define CONFIG_SYS_HID0_FINAL ( \ + CONFIG_HID0_FINAL_ABE_BIT |\ + CONFIG_HID0_FINAL_CLKOUT |\ + CONFIG_HID0_FINAL_DCE_BIT |\ + CONFIG_HID0_FINAL_DCFI_BIT |\ + CONFIG_HID0_FINAL_DECAREN_BIT |\ + CONFIG_HID0_FINAL_DLOCK_BIT |\ + CONFIG_HID0_FINAL_DOZE_BIT |\ + CONFIG_HID0_FINAL_DPM_BIT |\ + CONFIG_HID0_FINAL_EBA_BIT |\ + CONFIG_HID0_FINAL_EBD_BIT |\ + CONFIG_HID0_FINAL_ECLK_BIT |\ + CONFIG_HID0_FINAL_ECPE_BIT |\ + CONFIG_HID0_FINAL_EMCP_BIT |\ + CONFIG_HID0_FINAL_FBIOB_BIT |\ + CONFIG_HID0_FINAL_ICE_BIT |\ + CONFIG_HID0_FINAL_ICFI_BIT |\ + CONFIG_HID0_FINAL_IFEM_BIT |\ + CONFIG_HID0_FINAL_ILOCK_BIT |\ + CONFIG_HID0_FINAL_NAP_BIT |\ + CONFIG_HID0_FINAL_NOOPTI_BIT |\ + CONFIG_HID0_FINAL_PAR_BIT |\ + CONFIG_HID0_FINAL_SBCLK_BIT |\ + CONFIG_HID0_FINAL_SLEEP_BIT \ +) + +#define CONFIG_SYS_HID0_INIT ( \ + CONFIG_HID0_INIT_ABE_BIT |\ + CONFIG_HID0_INIT_CLKOUT |\ + CONFIG_HID0_INIT_DCE_BIT |\ + CONFIG_HID0_INIT_DCFI_BIT |\ + CONFIG_HID0_INIT_DECAREN_BIT |\ + CONFIG_HID0_INIT_DLOCK_BIT |\ + CONFIG_HID0_INIT_DOZE_BIT |\ + CONFIG_HID0_INIT_DPM_BIT |\ + CONFIG_HID0_INIT_EBA_BIT |\ + CONFIG_HID0_INIT_EBD_BIT |\ + CONFIG_HID0_INIT_ECPE_BIT |\ + CONFIG_HID0_INIT_EMCP_BIT |\ + CONFIG_HID0_INIT_FBIOB_BIT |\ + CONFIG_HID0_INIT_ICE_BIT |\ + CONFIG_HID0_INIT_ICFI_BIT |\ + CONFIG_HID0_INIT_IFEM_BIT |\ + CONFIG_HID0_INIT_ILOCK_BIT |\ + CONFIG_HID0_INIT_NAP_BIT |\ + CONFIG_HID0_INIT_NOOPTI_BIT |\ + CONFIG_HID0_INIT_PAR_BIT |\ + CONFIG_HID0_INIT_SLEEP_BIT \ +) + +#ifdef CONFIG_TARGET_IDS8313 +/* IDS8313 defines a reserved bit; keep to not break compatibility */ +#define CONFIG_HID2_SPECIAL 0x00020000 +#else +#define CONFIG_HID2_SPECIAL 0x0 +#endif + +#define CONFIG_SYS_HID2 ( \ + CONFIG_HID2_LET_BIT |\ + CONFIG_HID2_IFEB_BIT |\ + CONFIG_HID2_MESISTATE_BIT |\ + CONFIG_HID2_IFEC_BIT |\ + CONFIG_HID2_EBQS_BIT |\ + CONFIG_HID2_EBPX_BIT |\ + CONFIG_HID2_ELRW_BIT |\ + CONFIG_HID2_NOKS_BIT |\ + CONFIG_HID2_HBE_BIT |\ + CONFIG_HID2_IWLCK |\ + CONFIG_HID2_ICWP_BIT |\ + CONFIG_HID2_DWLCK |\ + CONFIG_HID2_SPECIAL \ +) diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig new file mode 100644 index 0000000000..c657a47b11 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/hrcw/Kconfig @@ -0,0 +1,816 @@ +menu "Reset Configuration Word" + +choice + prompt "Local bus memory controller clock mode" + +config LBMC_CLOCK_MODE_1_1 + bool "1 : 1" + +config LBMC_CLOCK_MODE_1_2 + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X + bool "1 : 2" + +endchoice + +choice + prompt "DDR SDRAM memory controller clock mode" + +config DDR_MC_CLOCK_MODE_1_2 + bool "1 : 2" + +config DDR_MC_CLOCK_MODE_1_1 + depends on ARCH_MPC8315 || ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X + bool "1 : 1" + +endchoice + +if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349 + +choice + prompt "System PLL VCO division" + +config SYSTEM_PLL_VCO_DIV_1 + depends on !ARCH_MPC837X + bool "1" + +config SYSTEM_PLL_VCO_DIV_2 + bool "2" + +config SYSTEM_PLL_VCO_DIV_4 + depends on !ARCH_MPC831X + bool "4" + +config SYSTEM_PLL_VCO_DIV_8 + depends on !ARCH_MPC831X + bool "8" + +endchoice + +endif + +choice + prompt "System PLL multiplication factor" + +config SYSTEM_PLL_FACTOR_2_1 + bool "2 : 1" + +config SYSTEM_PLL_FACTOR_3_1 + bool "3 : 1" + +config SYSTEM_PLL_FACTOR_4_1 + bool "4 : 1" + +config SYSTEM_PLL_FACTOR_5_1 + bool "5 : 1" + +config SYSTEM_PLL_FACTOR_6_1 + bool "6 : 1" + +config SYSTEM_PLL_FACTOR_7_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "7 : 1" + +config SYSTEM_PLL_FACTOR_8_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "8 : 1" + +config SYSTEM_PLL_FACTOR_9_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "9 : 1" + +config SYSTEM_PLL_FACTOR_10_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "10 : 1" + +config SYSTEM_PLL_FACTOR_11_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "11 : 1" + +config SYSTEM_PLL_FACTOR_12_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "12 : 1" + +config SYSTEM_PLL_FACTOR_13_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "13 : 1" + +config SYSTEM_PLL_FACTOR_14_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "14 : 1" + +config SYSTEM_PLL_FACTOR_15_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X + bool "15 : 1" + +config SYSTEM_PLL_FACTOR_16_1 + depends on ARCH_MPC8349 || ARCH_MPV8360 + bool "16 : 1" + +endchoice + +config CORE_PLL_BYPASS + bool "Core PLL bypassed" + +if !CORE_PLL_BYPASS + +choice + prompt "Core PLL Ratio" + +config CORE_PLL_RATIO_1_1 + bool "1 : 1" + +config CORE_PLL_RATIO_15_1 + bool "1.5 : 1" + +config CORE_PLL_RATIO_2_1 + bool "2 : 1" + +config CORE_PLL_RATIO_25_1 + bool "2.5 : 1" + +config CORE_PLL_RATIO_3_1 + bool "3 : 1" + +endchoice + +choice + prompt "Core PLL VCO Divider" + +config CORE_PLL_VCO_DIVIDER_2 + bool "2" + +config CORE_PLL_VCO_DIVIDER_4 + bool "4" + +config CORE_PLL_VCO_DIVIDER_8 + depends on !ARCH_MPC8315 + bool "8" + +endchoice + +endif + +if MPC83XX_QUICC_ENGINE + +choice + prompt "QUICC Engine PLL VCO Divider" + +config QUICC_VCO_DIVIDER_2 + bool "2" + +config QUICC_VCO_DIVIDER_4 + bool "4" + +config QUICC_VCO_DIVIDER_8 + depends on ARCH_MPC8309 + bool "8" + +endchoice + +choice + prompt "QUICC Engine PLL division factor" + +config QUICC_DIV_FACTOR_1 + bool "1" + +config QUICC_DIV_FACTOR_2 + bool "2" + +endchoice + +choice + prompt "QUICC Engine PLL multiplication factor" + +config QUICC_MULT_FACTOR_2 + bool "2" + +config QUICC_MULT_FACTOR_3 + bool "3" + +config QUICC_MULT_FACTOR_4 + bool "4" + +config QUICC_MULT_FACTOR_5 + bool "5" + +config QUICC_MULT_FACTOR_6 + bool "6" + +config QUICC_MULT_FACTOR_7 + bool "7" + +config QUICC_MULT_FACTOR_8 + bool "8" + +config QUICC_MULT_FACTOR_9 + depends on ARCH_MPC8360 + bool "9" + +config QUICC_MULT_FACTOR_10 + depends on ARCH_MPC8360 + bool "10" + +config QUICC_MULT_FACTOR_11 + depends on ARCH_MPC8360 + bool "11" + +config QUICC_MULT_FACTOR_12 + depends on ARCH_MPC8360 + bool "12" + +config QUICC_MULT_FACTOR_13 + depends on ARCH_MPC8360 + bool "13" + +config QUICC_MULT_FACTOR_14 + depends on ARCH_MPC8360 + bool "14" + +config QUICC_MULT_FACTOR_15 + depends on ARCH_MPC8360 + bool "15" + +config QUICC_MULT_FACTOR_16 + depends on ARCH_MPC8360 + bool "16" + +config QUICC_MULT_FACTOR_17 + depends on ARCH_MPC8360 + bool "17" + +config QUICC_MULT_FACTOR_18 + depends on ARCH_MPC8360 + bool "18" + +config QUICC_MULT_FACTOR_19 + depends on ARCH_MPC8360 + bool "19" + +config QUICC_MULT_FACTOR_20 + depends on ARCH_MPC8360 + bool "20" + +config QUICC_MULT_FACTOR_21 + depends on ARCH_MPC8360 + bool "21" + +config QUICC_MULT_FACTOR_22 + depends on ARCH_MPC8360 + bool "22" + +config QUICC_MULT_FACTOR_23 + depends on ARCH_MPC8360 + bool "23" + +config QUICC_MULT_FACTOR_24 + depends on ARCH_MPC8360 + bool "24" + +config QUICC_MULT_FACTOR_25 + depends on ARCH_MPC8360 + bool "25" + +config QUICC_MULT_FACTOR_26 + depends on ARCH_MPC8360 + bool "26" + +config QUICC_MULT_FACTOR_27 + depends on ARCH_MPC8360 + bool "27" + +config QUICC_MULT_FACTOR_28 + depends on ARCH_MPC8360 + bool "28" + +config QUICC_MULT_FACTOR_29 + depends on ARCH_MPC8360 + bool "29" + +config QUICC_MULT_FACTOR_30 + depends on ARCH_MPC8360 + bool "30" + +config QUICC_MULT_FACTOR_31 + depends on ARCH_MPC8360 + bool "31" + +endchoice + +endif + +if MPC83XX_PCI_SUPPORT + +choice + prompt "PCI host mode" + +config PCI_HOST_MODE_DISABLE + bool "Disabled" + +config PCI_HOST_MODE_ENABLE + bool "Enabled" + +endchoice + +if ARCH_MPC8349 + +choice + prompt "PCI 64-bit mode" + +config PCI_64BIT_MODE_DISABLE + bool "Disabled" + +config PCI_64BIT_MODE_ENABLE + bool "Enabled" + +endchoice + +endif + +choice + prompt "PCI internal arbiter 1 mode" + +config PCI_INT_ARBITER1_DISABLE + bool "Disabled" + +config PCI_INT_ARBITER1_ENABLE + bool "Enabled" + +endchoice + +if ARCH_MPC8349 + +choice + prompt "PCI internal arbiter 2 mode" + +config PCI_INT_ARBITER2_DISABLE + bool "Disabled" + +config PCI_INT_ARBITER2_ENABLE + bool "Enabled" + +endchoice + +endif + +if ARCH_MPC8360 + +choice + prompt "PCI clock output drive" + +config PCI_CLOCK_OUTPUT_DRIVE_DISABLE + bool "Disabled" + +config PCI_CLOCK_OUTPUT_DRIVE_ENABLE + bool "Enabled" + +endchoice + +endif + +endif + +choice + prompt "Core disable mode" + +config CORE_DISABLE_MODE_OFF + bool "Off" + +config CORE_DISABLE_MODE_ON + bool "On" + +endchoice + +choice + prompt "Boot Memory Space" + +config BOOT_MEMORY_SPACE_HIGH + bool "High" + +config BOOT_MEMORY_SPACE_LOW + bool "Low" + +endchoice + +choice + prompt "Boot Sequencer Configuration" + +config BOOT_SEQUENCER_DISABLED + bool "Disabled" + +config BOOT_SEQUENCER_NORMAL_I2C + bool "Normal I2C" + +config BOOT_SEQUENCER_EXTENDED_I2C + bool "Extended I2C" + +endchoice + +choice + prompt "Software Watchdog" + +config SOFTWARE_WATCHDOG_DISABLED + bool "Disabled" + +config SOFTWARE_WATCHDOG_ENABLED + bool "Enabled" + +endchoice + +choice + prompt "Boot ROM interface location" + +config BOOT_ROM_INTERFACE_DDR_SDRAM + bool "DDR_SDRAM" + +config BOOT_ROM_INTERFACE_PCI1 + depends on MPC83XX_PCI_SUPPORT + bool "PCI1" + +config BOOT_ROM_INTERFACE_PCI2 + depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349 + bool "PCI2" + +config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM + depends on ARCH_MPC837X + bool "PCI2" + +config BOOT_ROM_INTERFACE_ESDHC + depends on ARCH_MPC8309 + bool "eSDHC" + +config BOOT_ROM_INTERFACE_SPI + depends on ARCH_MPC8309 + bool "SPI" + +config BOOT_ROM_INTERFACE_GPCM_8BIT + bool "Local bus GPCM - 8-bit ROM" + +config BOOT_ROM_INTERFACE_GPCM_16BIT + bool "Local bus GPCM - 16-bit ROM" + +config BOOT_ROM_INTERFACE_GPCM_32BIT + depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X + bool "Local bus GPCM - 32-bit ROM" + +config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "Local bus NAND Flash- 8-bit small page ROM" + +config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE + depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360 + bool "Local bus NAND Flash- 8-bit large page ROM" + +endchoice + +if MPC83XX_TSEC1_SUPPORT + +choice + prompt "TSEC1 mode" + +config TSEC1_MODE_MII + depends on !ARCH_MPC8349 + bool "MII" + +config TSEC1_MODE_RMII + depends on ARCH_MPC831X && !ARCH_MPC8349 + bool "RMII" + +config TSEC1_MODE_RGMII + bool "RGMII" + +config TSEC1_MODE_RTBI + depends on ARCH_MPC831X || ARCH_MPC837X + bool "RTBI" + +config TSEC1_MODE_GMII + depends on ARCH_MPC8349 + bool "GMII" + +config TSEC1_MODE_TBI + depends on ARCH_MPC8349 + bool "TBI" + +config TSEC1_MODE_SGMII + depends on ARCH_MPC831X || ARCH_MPC837X + bool "SGMII" + +endchoice + +endif + +if MPC83XX_TSEC2_SUPPORT + +choice + prompt "TSEC2 mode" + +config TSEC2_MODE_MII + depends on !ARCH_MPC8349 + bool "MII" + +config TSEC2_MODE_RMII + depends on ARCH_MPC831X && !ARCH_MPC8349 + bool "RMII" + +config TSEC2_MODE_RGMII + bool "RGMII" + +config TSEC2_MODE_RTBI + depends on ARCH_MPC831X || ARCH_MPC837X + bool "RTBI" + +config TSEC2_MODE_GMII + depends on ARCH_MPC8349 + bool "GMII" + +config TSEC2_MODE_TBI + depends on ARCH_MPC8349 + bool "TBI" + +config TSEC2_MODE_SGMII + depends on ARCH_MPC831X || ARCH_MPC837X + bool "SGMII" + +endchoice + +endif + +choice + prompt "True litle-endian mode" + +config TRUE_LITTLE_ENDIAN_BIG_ENDIAN + bool "Big-endian" + +config TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN + bool "Little-endian" + +endchoice + +if ARCH_MPC8360 + +choice + prompt "Secondary DDR IO" + +config SECONDARY_DDR_IO_DISABLE + bool "Disable" + +config SECONDARY_DDR_IO_ENABLE + bool "Enable" + +endchoice + +endif + +if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360 + +choice + prompt "LALE timing" + +config LALE_TIMING_NORMAL + bool "Normal" + +config LALE_TIMING_EARLIER + bool "Earlier" + +endchoice + +endif + +if MPC83XX_LDP_PIN + +choice + prompt "LDP pin mux state" + +config LDP_PIN_MUX_STATE_1 + bool "Inital value 1" + +config LDP_PIN_MUX_STATE_0 + bool "Inital value 0" + +endchoice + +endif + +endmenu + +config LBMC_CLOCK_MODE + int + default 0 if LBMC_CLOCK_MODE_1_1 + default 1 if LBMC_CLOCK_MODE_1_2 + +config DDR_MC_CLOCK_MODE + int + default 1 if DDR_MC_CLOCK_MODE_1_2 + default 0 if DDR_MC_CLOCK_MODE_1_1 + +config SYSTEM_PLL_VCO_DIV + int + default 0 if ARCH_MPC8349 || ARCH_MPC832X + default 2 if ARCH_MPC8313 + default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X + default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X + default 2 if SYSTEM_PLL_VCO_DIV_8 && !ARCH_MPC8360 && !ARCH_MPC837X + default 0 if SYSTEM_PLL_VCO_DIV_4 && (ARCH_MPC8360 || ARCH_MPC837X) + default 1 if SYSTEM_PLL_VCO_DIV_8 && (ARCH_MPC8360 || ARCH_MPC837X) + default 2 if SYSTEM_PLL_VCO_DIV_2 && (ARCH_MPC8360 || ARCH_MPC837X) + default 3 if SYSTEM_PLL_VCO_DIV_1 + +config SYSTEM_PLL_FACTOR + int + default 2 if SYSTEM_PLL_FACTOR_2_1 + default 3 if SYSTEM_PLL_FACTOR_3_1 + default 4 if SYSTEM_PLL_FACTOR_4_1 + default 5 if SYSTEM_PLL_FACTOR_5_1 + default 6 if SYSTEM_PLL_FACTOR_6_1 + default 7 if SYSTEM_PLL_FACTOR_7_1 + default 8 if SYSTEM_PLL_FACTOR_8_1 + default 9 if SYSTEM_PLL_FACTOR_9_1 + default 10 if SYSTEM_PLL_FACTOR_10_1 + default 11 if SYSTEM_PLL_FACTOR_11_1 + default 12 if SYSTEM_PLL_FACTOR_12_1 + default 13 if SYSTEM_PLL_FACTOR_13_1 + default 14 if SYSTEM_PLL_FACTOR_14_1 + default 15 if SYSTEM_PLL_FACTOR_15_1 + default 0 if SYSTEM_PLL_FACTOR_16_1 + +config CORE_PLL_RATIO + hex + default 0x0 if CORE_PLL_BYPASS + default 0x02 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_2 + default 0x22 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_4 + default 0x42 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_8 + default 0x03 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_2 + default 0x23 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_4 + default 0x43 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_8 + default 0x04 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_2 + default 0x24 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_4 + default 0x44 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_8 + default 0x05 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_2 + default 0x25 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_4 + default 0x45 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_8 + default 0x06 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_2 + default 0x26 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_4 + default 0x46 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_8 + +config CORE_DISABLE_MODE + int + default 0 if CORE_DISABLE_MODE_OFF + default 1 if CORE_DISABLE_MODE_ON + +config BOOT_MEMORY_SPACE + int + default 0 if BOOT_MEMORY_SPACE_LOW + default 1 if BOOT_MEMORY_SPACE_HIGH + +config BOOT_SEQUENCER + int + default 0 if BOOT_SEQUENCER_DISABLED + default 1 if BOOT_SEQUENCER_NORMAL_I2C + default 2 if BOOT_SEQUENCER_EXTENDED_I2C + +config SOFTWARE_WATCHDOG + int + default 0 if SOFTWARE_WATCHDOG_DISABLED + default 1 if SOFTWARE_WATCHDOG_ENABLED + +config BOOT_ROM_INTERFACE + hex + default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM + default 0x4 if BOOT_ROM_INTERFACE_PCI1 + default 0x8 if BOOT_ROM_INTERFACE_PCI2 + default 0x8 if BOOT_ROM_INTERFACE_ESDHC + default 0xc if BOOT_ROM_INTERFACE_SPI + default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM + default 0x14 if BOOT_ROM_INTERFACE_GPCM_8BIT + default 0x18 if BOOT_ROM_INTERFACE_GPCM_16BIT + default 0x1c if BOOT_ROM_INTERFACE_GPCM_32BIT + default 0x5 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL + default 0x15 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE + +config TSEC1_MODE + hex + default 0x0 if !MPC83XX_TSEC1_SUPPORT + default 0x0 if TSEC1_MODE_MII + default 0x1 if TSEC1_MODE_RMII + default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349 + default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349 + default 0x6 if TSEC1_MODE_SGMII + default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349 + default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349 + default 0x2 if TSEC1_MODE_GMII + default 0x3 if TSEC1_MODE_TBI + +config TSEC2_MODE + hex + default 0x0 if !MPC83XX_TSEC2_SUPPORT + default 0x0 if TSEC2_MODE_MII + default 0x1 if TSEC2_MODE_RMII + default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349 + default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349 + default 0x6 if TSEC2_MODE_SGMII + default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349 + default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349 + default 0x2 if TSEC2_MODE_GMII + default 0x3 if TSEC2_MODE_TBI + +config SECONDARY_DDR_IO + int + default 0 if !ARCH_MPC8360 + default 0 if SECONDARY_DDR_IO_DISABLE + default 1 if SECONDARY_DDR_IO_ENABLE + +config TRUE_LITTLE_ENDIAN + int + default 0 if TRUE_LITTLE_ENDIAN_BIG_ENDIAN + default 1 if TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN + +config LALE_TIMING + int + default 0 if ARCH_MPC830X || ARCH_MPC837X + default 0 if LALE_TIMING_NORMAL + default 1 if LALE_TIMING_EARLIER + +config LDP_PIN_MUX_STATE + int + default 0 if !MPC83XX_LDP_PIN + default 0 if LDP_PIN_MUX_STATE_1 + default 1 if LDP_PIN_MUX_STATE_0 + +config QUICC_VCO_DIVIDER + int + default 0 if !MPC83XX_QUICC_ENGINE + default 0 if QUICC_VCO_DIVIDER_2 && ARCH_MPC8309 + default 1 if QUICC_VCO_DIVIDER_4 && ARCH_MPC8309 + default 2 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8309 + default 2 if QUICC_VCO_DIVIDER_2 && (ARCH_MPC832X || ARCH_MPC8360) + default 0 if QUICC_VCO_DIVIDER_4 && (ARCH_MPC832X || ARCH_MPC8360) + default 1 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8360 + +config QUICC_DIV_FACTOR + int + default 0 if !MPC83XX_QUICC_ENGINE + default 0 if QUICC_DIV_FACTOR_1 + default 1 if QUICC_DIV_FACTOR_2 + +config QUICC_MULT_FACTOR + int + default 0 if !MPC83XX_QUICC_ENGINE + default 2 if QUICC_MULT_FACTOR_2 + default 3 if QUICC_MULT_FACTOR_3 + default 4 if QUICC_MULT_FACTOR_4 + default 5 if QUICC_MULT_FACTOR_5 + default 6 if QUICC_MULT_FACTOR_6 + default 7 if QUICC_MULT_FACTOR_7 + default 8 if QUICC_MULT_FACTOR_8 + default 9 if QUICC_MULT_FACTOR_9 + default 10 if QUICC_MULT_FACTOR_10 + default 11 if QUICC_MULT_FACTOR_11 + default 12 if QUICC_MULT_FACTOR_12 + default 13 if QUICC_MULT_FACTOR_13 + default 14 if QUICC_MULT_FACTOR_14 + default 15 if QUICC_MULT_FACTOR_15 + default 16 if QUICC_MULT_FACTOR_16 + default 17 if QUICC_MULT_FACTOR_17 + default 18 if QUICC_MULT_FACTOR_18 + default 19 if QUICC_MULT_FACTOR_19 + default 20 if QUICC_MULT_FACTOR_20 + default 21 if QUICC_MULT_FACTOR_21 + default 22 if QUICC_MULT_FACTOR_22 + default 23 if QUICC_MULT_FACTOR_23 + default 24 if QUICC_MULT_FACTOR_24 + default 25 if QUICC_MULT_FACTOR_25 + default 26 if QUICC_MULT_FACTOR_26 + default 27 if QUICC_MULT_FACTOR_27 + default 28 if QUICC_MULT_FACTOR_28 + default 29 if QUICC_MULT_FACTOR_29 + default 30 if QUICC_MULT_FACTOR_30 + default 31 if QUICC_MULT_FACTOR_31 + +config PCI_HOST_MODE + int + default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308 + default 0 if PCI_HOST_MODE_DISABLE + default 1 if PCI_HOST_MODE_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless + +config PCI_64BIT_MODE + int + default 0 if !ARCH_MPC8349 + default 0 if PCI_64BIT_MODE_DISABLE + default 1 if PCI_64BIT_MODE_ENABLE + +config PCI_INT_ARBITER1 + int + default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308 + default 0 if PCI_INT_ARBITER1_DISABLE + default 1 if PCI_INT_ARBITER1_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless + +config PCI_INT_ARBITER2 + int + default 0 if !ARCH_MPC8349 + default 0 if PCI_INT_ARBITER2_DISABLE + default 1 if PCI_INT_ARBITER2_ENABLE + +config PCI_CLOCK_OUTPUT_DRIVE + int + default 0 if !ARCH_MPC8360 + default 0 if PCI_CLOCK_OUTPUT_DRIVE_DISABLE + default 1 if PCI_CLOCK_OUTPUT_DRIVE_ENABLE diff --git a/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h new file mode 100644 index 0000000000..7d66ba726b --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h @@ -0,0 +1,37 @@ +#ifdef CONFIG_ARCH_MPC8349 +#define TSEC1_MODE_SHIFT 17 +#define TSEC2_MODE_SHIFT 19 +#else +#define TSEC1_MODE_SHIFT 18 +#define TSEC2_MODE_SHIFT 21 +#endif + +#define CONFIG_SYS_HRCW_LOW (\ + (CONFIG_LBMC_CLOCK_MODE << (31 - 0)) |\ + (CONFIG_DDR_MC_CLOCK_MODE << (31 - 1)) |\ + (CONFIG_SYSTEM_PLL_VCO_DIV << (31 - 3)) |\ + (CONFIG_SYSTEM_PLL_FACTOR << (31 - 7)) |\ + (CONFIG_CORE_PLL_RATIO << (31 - 15)) |\ + (CONFIG_QUICC_VCO_DIVIDER << (31 - 25)) |\ + (CONFIG_QUICC_DIV_FACTOR << (31 - 26)) |\ + (CONFIG_QUICC_MULT_FACTOR << (31 - 31)) \ + ) + +#define CONFIG_SYS_HRCW_HIGH (\ + (CONFIG_PCI_HOST_MODE << (31 - 0)) |\ + (CONFIG_PCI_64BIT_MODE << (31 - 1)) |\ + (CONFIG_PCI_INT_ARBITER1 << (31 - 2)) |\ + (CONFIG_PCI_INT_ARBITER2 << (31 - 3)) |\ + (CONFIG_PCI_CLOCK_OUTPUT_DRIVE << (31 - 3)) |\ + (CONFIG_CORE_DISABLE_MODE << (31 - 4)) |\ + (CONFIG_BOOT_MEMORY_SPACE << (31 - 5)) |\ + (CONFIG_BOOT_SEQUENCER << (31 - 7)) |\ + (CONFIG_SOFTWARE_WATCHDOG << (31 - 8)) |\ + (CONFIG_BOOT_ROM_INTERFACE << (31 - 13)) |\ + (CONFIG_TSEC1_MODE << (31 - TSEC1_MODE_SHIFT)) |\ + (CONFIG_TSEC2_MODE << (31 - TSEC2_MODE_SHIFT)) |\ + (CONFIG_SECONDARY_DDR_IO << (31 - 27)) |\ + (CONFIG_TRUE_LITTLE_ENDIAN << (31 - 28)) |\ + (CONFIG_LALE_TIMING << (31 - 29)) |\ + (CONFIG_LDP_PIN_MUX_STATE << (31 - 30)) \ + ) diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig new file mode 100644 index 0000000000..a6b42a29af --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig @@ -0,0 +1,6 @@ +menu "Initial register configuration" + +source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr" +source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr" + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr new file mode 100644 index 0000000000..e6b6130de2 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr @@ -0,0 +1,139 @@ +menu "LCRR - Clock Ratio Register register" + +if !ARCH_MPC8309 && !ARCH_MPC831X && !ARCH_MPC832X + +choice + prompt "DLL bypass" + +config LCRR_DBYP_UNSET + bool "Don't set value" + +config LCRR_DBYP_PLL_ENABLED + bool "PLL enabled" + +config LCRR_DBYP_PLL_BYPASSED + bool "PLL bypassed" + +endchoice + +endif + +if ARCH_MPC834X || ARCH_MPC8360 + +choice + prompt "Additional delay cycles for SDRAM control signals" + +config LCRR_BUFCMDC_UNSET + bool "Don't set value" + +config LCRR_BUFCMDC_4 + bool "4" + +config LCRR_BUFCMDC_1 + bool "1" + +config LCRR_BUFCMDC_2 + bool "2" + +config LCRR_BUFCMDC_3 + bool "3" + +endchoice + +choice + prompt "Extended CAS latency" + +config LCRR_ECL_UNSET + bool "Don't set value" + +config LCRR_ECL_4 + bool "4" + +config LCRR_ECL_5 + bool "5" + +config LCRR_ECL_6 + bool "6" + +config LCRR_ECL_7 + bool "7" + +endchoice + +endif # ARCH_MPC834X || ARCH_MPC8360 + +if !ARCH_MPC8308 + +choice + prompt "External address delay cycles" + +config LCRR_EADC_UNSET + bool "Don't set value" + +config LCRR_EADC_4 + bool "4" + +config LCRR_EADC_1 + bool "1" + +config LCRR_EADC_2 + bool "2" + +config LCRR_EADC_3 + bool "3" + +endchoice + +endif # !ARCH_MPC8308 + +choice + prompt "System clock divider" + +config LCRR_CLKDIV_UNSET + bool "Don't set value" + +config LCRR_CLKDIV_2 + bool "2" + +config LCRR_CLKDIV_4 + bool "4" + +config LCRR_CLKDIV_8 + bool "8" + +endchoice + +config LCRR_DBYP + hex + default 0x0 if LCRR_DBYP_UNSET || LCRR_DBYP_PLL_ENABLED + default 0x80000000 if LCRR_DBYP_PLL_BYPASSED + +config LCRR_BUFCMDC + hex + default 0x0 if LCRR_BUFCMDC_4 || LCRR_BUFCMDC_UNSET + default 0x10000000 if LCRR_BUFCMDC_1 + default 0x20000000 if LCRR_BUFCMDC_2 + default 0x30000000 if LCRR_BUFCMDC_3 + +config LCRR_ECL + hex + default 0x0 if LCRR_ECL_4 || LCRR_ECL_UNSET + default 0x1000000 if LCRR_ECL_5 + default 0x2000000 if LCRR_ECL_6 + default 0x3000000 if LCRR_ECL_7 + +config LCRR_EADC + hex + default 0x0 if LCRR_EADC_4 || LCRR_EADC_UNSET + default 0x10000 if LCRR_EADC_1 + default 0x20000 if LCRR_EADC_2 + default 0x30000 if LCRR_EADC_3 + +config LCRR_CLKDIV + hex + default 0x0 if LCRR_CLKDIV_UNSET + default 0x2 if LCRR_CLKDIV_2 + default 0x4 if LCRR_CLKDIV_4 + default 0x8 if LCRR_CLKDIV_8 + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr new file mode 100644 index 0000000000..f32309e6c0 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr @@ -0,0 +1,115 @@ +menu "SPCR - System priority and configuration register" + +choice + prompt "Optimize" + +config SPCR_OPT_UNSET + bool "Don't set value" + +config SPCR_OPT_NONE + bool "No performance enhancement" + +config SPCR_OPT_SPEC_READ + bool "Performance enhancement by speculative read" + +endchoice + +if ARCH_MPC8308 || ARCH_MPC831X || ARCH_MPC837X + +choice + prompt "TSEC emergency priority" + +config SPCR_TSECEP_UNSET + bool "Don't set value" + +config SPCR_TSECEP_0 + bool "Level 0 (lowest priority)" + +config SPCR_TSECEP_1 + bool "Level 1" + +config SPCR_TSECEP_2 + bool "Level 2" + +config SPCR_TSECEP_3 + bool "Level 3 (highest priority)" + +endchoice + +endif + +if ARCH_MPC8349 + +choice + prompt "TSEC1 emergency priority" + +config SPCR_TSEC1EP_UNSET + bool "Don't set value" + +config SPCR_TSEC1EP_0 + bool "Level 0 (lowest priority)" + +config SPCR_TSEC1EP_1 + bool "Level 1" + +config SPCR_TSEC1EP_2 + bool "Level 2" + +config SPCR_TSEC1EP_3 + bool "Level 3 (highest priority)" + +endchoice + +choice + prompt "TSEC2 emergency priority" + +config SPCR_TSEC2EP_UNSET + bool "Don't set value" + +config SPCR_TSEC2EP_0 + bool "Level 0 (lowest priority)" + +config SPCR_TSEC2EP_1 + bool "Level 1" + +config SPCR_TSEC2EP_2 + bool "Level 2" + +config SPCR_TSEC2EP_3 + bool "Level 3 (highest priority)" + +endchoice + +endif + +config SPCR_OPT + hex + default 0x0 if SPCR_OPT_UNSET + default 0x0 if SPCR_OPT_NONE + default 0x800000 if SPCR_OPT_SPEC_READ + +config SPCR_TSECEP + hex + default 0x0 if SPCR_TSECEP_UNSET + default 0x0 if SPCR_TSECEP_0 + default 0x100 if SPCR_TSECEP_1 + default 0x200 if SPCR_TSECEP_2 + default 0x300 if SPCR_TSECEP_3 + +config SPCR_TSEC1EP + hex + default 0x0 if SPCR_TSEC1EP_UNSET + default 0x0 if SPCR_TSEC1EP_0 + default 0x100 if SPCR_TSEC1EP_1 + default 0x200 if SPCR_TSEC1EP_2 + default 0x300 if SPCR_TSEC1EP_3 + +config SPCR_TSEC2EP + hex + default 0x0 if SPCR_TSEC2EP_UNSET + default 0x0 if SPCR_TSEC2EP_0 + default 0x1 if SPCR_TSEC2EP_1 + default 0x2 if SPCR_TSEC2EP_2 + default 0x3 if SPCR_TSEC2EP_3 + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/initreg/initreg.h b/arch/powerpc/cpu/mpc83xx/initreg/initreg.h new file mode 100644 index 0000000000..63aa5c9466 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/initreg/initreg.h @@ -0,0 +1,79 @@ +#define SPCR_PCIHPE_MASK 0x10000000 +#define SPCR_PCIPR_MASK 0x03000000 +#define SPCR_OPT_MASK 0x00800000 +#define SPCR_TBEN_MASK 0x00400000 +#define SPCR_COREPR_MASK 0x00300000 +#define SPCR_TSEC1DP_MASK 0x00003000 +#define SPCR_TSEC1BDP_MASK 0x00000C00 +#define SPCR_TSEC1EP_MASK 0x00000300 +#define SPCR_TSEC2DP_MASK 0x00000030 +#define SPCR_TSEC2BDP_MASK 0x0000000C +#define SPCR_TSEC2EP_MASK 0x00000003 +#define SPCR_TSECDP_MASK 0x00003000 +#define SPCR_TSECBDP_MASK 0x00000C00 +#define SPCR_TSECEP_MASK 0x00000300 + + const __be32 spcr_mask = +#if defined(CONFIG_SPCR_OPT) && !defined(CONFIG_SPCR_OPT_UNSET) + SPCR_OPT_MASK | +#endif +#if defined(CONFIG_SPCR_TSECEP) && !defined(CONFIG_SPCR_TSECEP_UNSET) + SPCR_TSECEP_MASK | +#endif +#if defined(CONFIG_SPCR_TSEC1EP) && !defined(CONFIG_SPCR_TSEC1EP_UNSET) + SPCR_TSEC1EP_MASK | +#endif +#if defined(CONFIG_SPCR_TSEC2EP) && !defined(CONFIG_SPCR_TSEC2EP_UNSET) + SPCR_TSEC2EP_MASK | +#endif + 0; + const __be32 spcr_val = +#if defined(CONFIG_SPCR_OPT) && !defined(CONFIG_SPCR_OPT_UNSET) + CONFIG_SPCR_OPT | +#endif +#if defined(CONFIG_SPCR_TSECEP) && !defined(CONFIG_SPCR_TSECEP_UNSET) + CONFIG_SPCR_TSECEP | +#endif +#if defined(CONFIG_SPCR_TSEC1EP) && !defined(CONFIG_SPCR_TSEC1EP_UNSET) + CONFIG_SPCR_TSEC1EP | +#endif +#if defined(CONFIG_SPCR_TSEC2EP) && !defined(CONFIG_SPCR_TSEC2EP_UNSET) + CONFIG_SPCR_TSEC2EP | +#endif + 0; + + const __be32 lcrr_mask = +#if defined(CONFIG_LCRR_DBYP) && !defined(CONFIG_LCRR_DBYP_UNSET) + LCRR_DBYP | +#endif +#if defined(CONFIG_LCRR_BUFCMDC) && !defined(CONFIG_LCRR_BUFCMDC_UNSET) + LCRR_BUFCMDC | +#endif +#if defined(CONFIG_LCRR_ECL) && !defined(CONFIG_LCRR_ECL_UNSET) + LCRR_ECL | +#endif +#if defined(CONFIG_LCRR_EADC) && !defined(CONFIG_LCRR_EADC_UNSET) + LCRR_EADC | +#endif +#if defined(CONFIG_LCRR_CLKDIV) && !defined(CONFIG_LCRR_CLKDIV_UNSET) + LCRR_CLKDIV | +#endif + 0; + + const __be32 lcrr_val = +#if defined(CONFIG_LCRR_DBYP) && !defined(CONFIG_LCRR_DBYP_UNSET) + CONFIG_LCRR_DBYP | +#endif +#if defined(CONFIG_LCRR_BUFCMDC) && !defined(CONFIG_LCRR_BUFCMDC_UNSET) + CONFIG_LCRR_BUFCMDC | +#endif +#if defined(CONFIG_LCRR_ECL) && !defined(CONFIG_LCRR_ECL_UNSET) + CONFIG_LCRR_ECL | +#endif +#if defined(CONFIG_LCRR_EADC) && !defined(CONFIG_LCRR_EADC_UNSET) + CONFIG_LCRR_EADC | +#endif +#if defined(CONFIG_LCRR_CLKDIV) && !defined(CONFIG_LCRR_CLKDIV_UNSET) + CONFIG_LCRR_CLKDIV | +#endif + 0; diff --git a/arch/powerpc/cpu/mpc83xx/lblaw/Kconfig b/arch/powerpc/cpu/mpc83xx/lblaw/Kconfig new file mode 100644 index 0000000000..b20f68b77a --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/lblaw/Kconfig @@ -0,0 +1,519 @@ +menu "LBLAW setup" + +choice + prompt "NAND LAWBAR for NAND SPL" + +config NAND_LBLAWBAR_PRELIM_NONE + bool "None" + +config NAND_LBLAWBAR_PRELIM_0 + bool "0" + depends on LBLAW0 + +config NAND_LBLAWBAR_PRELIM_1 + bool "1" + depends on LBLAW1 + +config NAND_LBLAWBAR_PRELIM_2 + bool "2" + depends on LBLAW2 + +config NAND_LBLAWBAR_PRELIM_3 + bool "3" + depends on LBLAW3 + +endchoice + +menuconfig LBLAW0 + bool "LBLAW0" + +if LBLAW0 + +config LBLAW0_ENABLE + bool "Window enable" + default "y" + +if !LBLAW0_ENABLE + +config LBLAW0_BASE + hex + default 0x0 + +endif + +if LBLAW0_ENABLE + +config LBLAW0_NAME + string "Identifier" + +config LBLAW0_BASE + hex "Window base" + +choice + prompt "Window size" + +config LBLAW0_LENGTH_4_KBYTES + bool "4 kb" + +config LBLAW0_LENGTH_8_KBYTES + bool "8 kb" + +config LBLAW0_LENGTH_16_KBYTES + bool "16 kb" + +config LBLAW0_LENGTH_32_KBYTES + bool "32 kb" + +config LBLAW0_LENGTH_64_KBYTES + bool "64 kb" + +config LBLAW0_LENGTH_128_KBYTES + bool "128 kb" + +config LBLAW0_LENGTH_256_KBYTES + bool "256 kb" + +config LBLAW0_LENGTH_512_KBYTES + bool "512 kb" + +config LBLAW0_LENGTH_1_MBYTES + bool "1 mb" + +config LBLAW0_LENGTH_2_MBYTES + bool "2 mb" + +config LBLAW0_LENGTH_4_MBYTES + bool "4 mb" + +config LBLAW0_LENGTH_8_MBYTES + bool "8 mb" + +config LBLAW0_LENGTH_16_MBYTES + bool "16 mb" + +config LBLAW0_LENGTH_32_MBYTES + bool "32 mb" + +config LBLAW0_LENGTH_64_MBYTES + bool "64 mb" + +config LBLAW0_LENGTH_128_MBYTES + bool "128 mb" + +config LBLAW0_LENGTH_256_MBYTES + bool "256 mb" + +config LBLAW0_LENGTH_512_MBYTES + bool "512 mb" + +config LBLAW0_LENGTH_1_GBYTES + bool "1 gb" + +config LBLAW0_LENGTH_2_GBYTES + bool "2 gb" + +endchoice + +endif # LBLAW0_ENABLE + +endif # LBLAW0 + +config LBLAW0_ENABLE_BIT + hex + default 0x0 if !LBLAW0_ENABLE + default 0x80000000 if LBLAW0_ENABLE + +config LBLAW0_LENGTH + hex + default 0x0 if !LBLAW0_ENABLE + default 0x0000000B if LBLAW0_LENGTH_4_KBYTES + default 0x0000000C if LBLAW0_LENGTH_8_KBYTES + default 0x0000000D if LBLAW0_LENGTH_16_KBYTES + default 0x0000000E if LBLAW0_LENGTH_32_KBYTES + default 0x0000000F if LBLAW0_LENGTH_64_KBYTES + default 0x00000010 if LBLAW0_LENGTH_128_KBYTES + default 0x00000011 if LBLAW0_LENGTH_256_KBYTES + default 0x00000012 if LBLAW0_LENGTH_512_KBYTES + default 0x00000013 if LBLAW0_LENGTH_1_MBYTES + default 0x00000014 if LBLAW0_LENGTH_2_MBYTES + default 0x00000015 if LBLAW0_LENGTH_4_MBYTES + default 0x00000016 if LBLAW0_LENGTH_8_MBYTES + default 0x00000017 if LBLAW0_LENGTH_16_MBYTES + default 0x00000018 if LBLAW0_LENGTH_32_MBYTES + default 0x00000019 if LBLAW0_LENGTH_64_MBYTES + default 0x0000001A if LBLAW0_LENGTH_128_MBYTES + default 0x0000001B if LBLAW0_LENGTH_256_MBYTES + default 0x0000001C if LBLAW0_LENGTH_512_MBYTES + default 0x0000001D if LBLAW0_LENGTH_1_GBYTES + default 0x0000001E if LBLAW0_LENGTH_2_GBYTES + +menuconfig LBLAW1 + bool "LBLAW1" + +if LBLAW1 + +config LBLAW1_ENABLE + bool "Window enable" + default "y" + +if !LBLAW1_ENABLE + +config LBLAW1_BASE + hex + default 0x0 + +endif + +if LBLAW1_ENABLE + +config LBLAW1_NAME + string "Identifier" + +config LBLAW1_BASE + hex "Window base" + +choice + prompt "Window size" + +config LBLAW1_LENGTH_4_KBYTES + bool "4 kb" + +config LBLAW1_LENGTH_8_KBYTES + bool "8 kb" + +config LBLAW1_LENGTH_16_KBYTES + bool "16 kb" + +config LBLAW1_LENGTH_32_KBYTES + bool "32 kb" + +config LBLAW1_LENGTH_64_KBYTES + bool "64 kb" + +config LBLAW1_LENGTH_128_KBYTES + bool "128 kb" + +config LBLAW1_LENGTH_256_KBYTES + bool "256 kb" + +config LBLAW1_LENGTH_512_KBYTES + bool "512 kb" + +config LBLAW1_LENGTH_1_MBYTES + bool "1 mb" + +config LBLAW1_LENGTH_2_MBYTES + bool "2 mb" + +config LBLAW1_LENGTH_4_MBYTES + bool "4 mb" + +config LBLAW1_LENGTH_8_MBYTES + bool "8 mb" + +config LBLAW1_LENGTH_16_MBYTES + bool "16 mb" + +config LBLAW1_LENGTH_32_MBYTES + bool "32 mb" + +config LBLAW1_LENGTH_64_MBYTES + bool "64 mb" + +config LBLAW1_LENGTH_128_MBYTES + bool "128 mb" + +config LBLAW1_LENGTH_256_MBYTES + bool "256 mb" + +config LBLAW1_LENGTH_512_MBYTES + bool "512 mb" + +config LBLAW1_LENGTH_1_GBYTES + bool "1 gb" + +config LBLAW1_LENGTH_2_GBYTES + bool "2 gb" + +endchoice + +endif # LBLAW1_ENABLE + +endif # LBLAW1 + +config LBLAW1_ENABLE_BIT + hex + default 0x0 if !LBLAW1_ENABLE + default 0x80000000 if LBLAW1_ENABLE + +config LBLAW1_LENGTH + hex + default 0x0 if !LBLAW1_ENABLE + default 0x0000000B if LBLAW1_LENGTH_4_KBYTES + default 0x0000000C if LBLAW1_LENGTH_8_KBYTES + default 0x0000000D if LBLAW1_LENGTH_16_KBYTES + default 0x0000000E if LBLAW1_LENGTH_32_KBYTES + default 0x0000000F if LBLAW1_LENGTH_64_KBYTES + default 0x00000010 if LBLAW1_LENGTH_128_KBYTES + default 0x00000011 if LBLAW1_LENGTH_256_KBYTES + default 0x00000012 if LBLAW1_LENGTH_512_KBYTES + default 0x00000013 if LBLAW1_LENGTH_1_MBYTES + default 0x00000014 if LBLAW1_LENGTH_2_MBYTES + default 0x00000015 if LBLAW1_LENGTH_4_MBYTES + default 0x00000016 if LBLAW1_LENGTH_8_MBYTES + default 0x00000017 if LBLAW1_LENGTH_16_MBYTES + default 0x00000018 if LBLAW1_LENGTH_32_MBYTES + default 0x00000019 if LBLAW1_LENGTH_64_MBYTES + default 0x0000001A if LBLAW1_LENGTH_128_MBYTES + default 0x0000001B if LBLAW1_LENGTH_256_MBYTES + default 0x0000001C if LBLAW1_LENGTH_512_MBYTES + default 0x0000001D if LBLAW1_LENGTH_1_GBYTES + default 0x0000001E if LBLAW1_LENGTH_2_GBYTES + +menuconfig LBLAW2 + bool "LBLAW2" + +if LBLAW2 + +config LBLAW2_ENABLE + bool "Window enable" + default "y" + +if !LBLAW2_ENABLE + +config LBLAW2_BASE + hex + default 0x0 + +endif + +if LBLAW2_ENABLE + +config LBLAW2_NAME + string "Identifier" + +config LBLAW2_BASE + hex "Window base" + +choice + prompt "Window size" + +config LBLAW2_LENGTH_4_KBYTES + bool "4 kb" + +config LBLAW2_LENGTH_8_KBYTES + bool "8 kb" + +config LBLAW2_LENGTH_16_KBYTES + bool "16 kb" + +config LBLAW2_LENGTH_32_KBYTES + bool "32 kb" + +config LBLAW2_LENGTH_64_KBYTES + bool "64 kb" + +config LBLAW2_LENGTH_128_KBYTES + bool "128 kb" + +config LBLAW2_LENGTH_256_KBYTES + bool "256 kb" + +config LBLAW2_LENGTH_512_KBYTES + bool "512 kb" + +config LBLAW2_LENGTH_1_MBYTES + bool "1 mb" + +config LBLAW2_LENGTH_2_MBYTES + bool "2 mb" + +config LBLAW2_LENGTH_4_MBYTES + bool "4 mb" + +config LBLAW2_LENGTH_8_MBYTES + bool "8 mb" + +config LBLAW2_LENGTH_16_MBYTES + bool "16 mb" + +config LBLAW2_LENGTH_32_MBYTES + bool "32 mb" + +config LBLAW2_LENGTH_64_MBYTES + bool "64 mb" + +config LBLAW2_LENGTH_128_MBYTES + bool "128 mb" + +config LBLAW2_LENGTH_256_MBYTES + bool "256 mb" + +config LBLAW2_LENGTH_512_MBYTES + bool "512 mb" + +config LBLAW2_LENGTH_1_GBYTES + bool "1 gb" + +config LBLAW2_LENGTH_2_GBYTES + bool "2 gb" + +endchoice + +endif # LBLAW2_ENABLE + +endif # LBLAW2 + +config LBLAW2_ENABLE_BIT + hex + default 0x0 if !LBLAW2_ENABLE + default 0x80000000 if LBLAW2_ENABLE + +config LBLAW2_LENGTH + hex + default 0x0 if !LBLAW2_ENABLE + default 0x0000000B if LBLAW2_LENGTH_4_KBYTES + default 0x0000000C if LBLAW2_LENGTH_8_KBYTES + default 0x0000000D if LBLAW2_LENGTH_16_KBYTES + default 0x0000000E if LBLAW2_LENGTH_32_KBYTES + default 0x0000000F if LBLAW2_LENGTH_64_KBYTES + default 0x00000010 if LBLAW2_LENGTH_128_KBYTES + default 0x00000011 if LBLAW2_LENGTH_256_KBYTES + default 0x00000012 if LBLAW2_LENGTH_512_KBYTES + default 0x00000013 if LBLAW2_LENGTH_1_MBYTES + default 0x00000014 if LBLAW2_LENGTH_2_MBYTES + default 0x00000015 if LBLAW2_LENGTH_4_MBYTES + default 0x00000016 if LBLAW2_LENGTH_8_MBYTES + default 0x00000017 if LBLAW2_LENGTH_16_MBYTES + default 0x00000018 if LBLAW2_LENGTH_32_MBYTES + default 0x00000019 if LBLAW2_LENGTH_64_MBYTES + default 0x0000001A if LBLAW2_LENGTH_128_MBYTES + default 0x0000001B if LBLAW2_LENGTH_256_MBYTES + default 0x0000001C if LBLAW2_LENGTH_512_MBYTES + default 0x0000001D if LBLAW2_LENGTH_1_GBYTES + default 0x0000001E if LBLAW2_LENGTH_2_GBYTES + +menuconfig LBLAW3 + bool "LBLAW3" + +if LBLAW3 + +config LBLAW3_ENABLE + bool "Window enable" + default "y" + +if !LBLAW3_ENABLE + +config LBLAW3_BASE + hex + default 0x0 + +endif + +if LBLAW3_ENABLE + +config LBLAW3_NAME + string "Identifier" + +config LBLAW3_BASE + hex "Window base" + +choice + prompt "Window size" + +config LBLAW3_LENGTH_4_KBYTES + bool "4 kb" + +config LBLAW3_LENGTH_8_KBYTES + bool "8 kb" + +config LBLAW3_LENGTH_16_KBYTES + bool "16 kb" + +config LBLAW3_LENGTH_32_KBYTES + bool "32 kb" + +config LBLAW3_LENGTH_64_KBYTES + bool "64 kb" + +config LBLAW3_LENGTH_128_KBYTES + bool "128 kb" + +config LBLAW3_LENGTH_256_KBYTES + bool "256 kb" + +config LBLAW3_LENGTH_512_KBYTES + bool "512 kb" + +config LBLAW3_LENGTH_1_MBYTES + bool "1 mb" + +config LBLAW3_LENGTH_2_MBYTES + bool "2 mb" + +config LBLAW3_LENGTH_4_MBYTES + bool "4 mb" + +config LBLAW3_LENGTH_8_MBYTES + bool "8 mb" + +config LBLAW3_LENGTH_16_MBYTES + bool "16 mb" + +config LBLAW3_LENGTH_32_MBYTES + bool "32 mb" + +config LBLAW3_LENGTH_64_MBYTES + bool "64 mb" + +config LBLAW3_LENGTH_128_MBYTES + bool "128 mb" + +config LBLAW3_LENGTH_256_MBYTES + bool "256 mb" + +config LBLAW3_LENGTH_512_MBYTES + bool "512 mb" + +config LBLAW3_LENGTH_1_GBYTES + bool "1 gb" + +config LBLAW3_LENGTH_2_GBYTES + bool "2 gb" + +endchoice + +endif # LBLAW3_ENABLE + +endif # LBLAW3 + +config LBLAW3_ENABLE_BIT + hex + default 0x0 if !LBLAW3_ENABLE + default 0x80000000 if LBLAW3_ENABLE + +config LBLAW3_LENGTH + hex + default 0x0 if !LBLAW3_ENABLE + default 0x0000000B if LBLAW3_LENGTH_4_KBYTES + default 0x0000000C if LBLAW3_LENGTH_8_KBYTES + default 0x0000000D if LBLAW3_LENGTH_16_KBYTES + default 0x0000000E if LBLAW3_LENGTH_32_KBYTES + default 0x0000000F if LBLAW3_LENGTH_64_KBYTES + default 0x00000010 if LBLAW3_LENGTH_128_KBYTES + default 0x00000011 if LBLAW3_LENGTH_256_KBYTES + default 0x00000012 if LBLAW3_LENGTH_512_KBYTES + default 0x00000013 if LBLAW3_LENGTH_1_MBYTES + default 0x00000014 if LBLAW3_LENGTH_2_MBYTES + default 0x00000015 if LBLAW3_LENGTH_4_MBYTES + default 0x00000016 if LBLAW3_LENGTH_8_MBYTES + default 0x00000017 if LBLAW3_LENGTH_16_MBYTES + default 0x00000018 if LBLAW3_LENGTH_32_MBYTES + default 0x00000019 if LBLAW3_LENGTH_64_MBYTES + default 0x0000001A if LBLAW3_LENGTH_128_MBYTES + default 0x0000001B if LBLAW3_LENGTH_256_MBYTES + default 0x0000001C if LBLAW3_LENGTH_512_MBYTES + default 0x0000001D if LBLAW3_LENGTH_1_GBYTES + default 0x0000001E if LBLAW3_LENGTH_2_GBYTES + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/lblaw/lblaw.h b/arch/powerpc/cpu/mpc83xx/lblaw/lblaw.h new file mode 100644 index 0000000000..6972afcc2c --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/lblaw/lblaw.h @@ -0,0 +1,55 @@ +#if defined(CONFIG_LBLAW0) +#define CONFIG_SYS_LBLAWBAR0_PRELIM \ + CONFIG_LBLAW0_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM (\ + CONFIG_LBLAW0_ENABLE_BIT |\ + CONFIG_LBLAW0_LENGTH \ +) +#endif + +#if defined(CONFIG_LBLAW1) +#define CONFIG_SYS_LBLAWBAR1_PRELIM \ + CONFIG_LBLAW1_BASE +#define CONFIG_SYS_LBLAWAR1_PRELIM (\ + CONFIG_LBLAW1_ENABLE_BIT |\ + CONFIG_LBLAW1_LENGTH \ +) +#endif + +#if defined(CONFIG_LBLAW2) +#define CONFIG_SYS_LBLAWBAR2_PRELIM \ + CONFIG_LBLAW2_BASE +#define CONFIG_SYS_LBLAWAR2_PRELIM (\ + CONFIG_LBLAW2_ENABLE_BIT |\ + CONFIG_LBLAW2_LENGTH \ +) +#endif + +#if defined(CONFIG_LBLAW3) +#define CONFIG_SYS_LBLAWBAR3_PRELIM \ + CONFIG_LBLAW3_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (\ + CONFIG_LBLAW3_ENABLE_BIT |\ + CONFIG_LBLAW3_LENGTH \ +) +#endif + +#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_0 +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM +#endif + +#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_1 +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM +#endif + +#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_2 +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR2_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR2_PRELIM +#endif + +#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_3 +#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR3_PRELIM +#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR3_PRELIM +#endif diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index d3f979f3c4..b500ddd3f3 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -174,6 +174,41 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg, #endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */ +int get_pcie_clk(int index) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 pci_sync_in; + u8 spmf; + u8 clkin_div; + u32 sccr; + u32 csb_clk; + u32 testval; + + clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); + sccr = im->clk.sccr; + pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div); + spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; + csb_clk = pci_sync_in * (1 + clkin_div) * spmf; + + if (index) + testval = (sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT; + else + testval = (sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT; + + switch (testval) { + case 0: + return 0; + case 1: + return csb_clk; + case 2: + return csb_clk / 2; + case 3: + return csb_clk / 3; + } + + return 0; +} + static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) { immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; @@ -269,11 +304,9 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) /* Hose configure header is memory-mapped */ hose_cfg_base = (void *)pex; - get_clocks(); /* Configure the PCIE controller core clock ratio */ out_le32(hose_cfg_base + PEX_GCLK_RATIO, - (((bus ? gd->arch.pciexp2_clk : gd->arch.pciexp1_clk) - / 1000000) * 16) / 333); + ((get_pcie_clk(bus) / 1000000) * 16) / 333); udelay(1000000); /* Do Type 1 bridge configuration */ diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c index 328a018eb6..8b5ecdb9ad 100644 --- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c +++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c @@ -31,7 +31,7 @@ void board_add_ram_info(int use_default) printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_16) puts(", 16-bit"); else if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_32) @@ -281,7 +281,7 @@ long int spd_sdram() /* * Set up LAWBAR for all of DDR. */ - ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + ecm->bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size)); debug("DDR:bar=0x%08x\n", ecm->bar); debug("DDR:ar=0x%08x\n", ecm->ar); @@ -426,7 +426,7 @@ long int spd_sdram() /* * Errata DDR6 work around: input enable 2 cycles earlier. - * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2. + * including MPC834X Rev1.0/1.1 and MPC8360 Rev1.1/1.2. */ if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){ if (caslat == 2) @@ -436,7 +436,7 @@ long int spd_sdram() else if (caslat == 4) ddr->debug_reg = 0x202c0000; /* CL=3.0 */ - __asm__ __volatile__ ("sync"); + sync(); debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg); } @@ -765,7 +765,8 @@ long int spd_sdram() #endif debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); - asm("sync;isync"); + sync(); + isync(); udelay(600); @@ -834,7 +835,8 @@ long int spd_sdram() #endif /* Enable controller, and GO! */ ddr->sdram_cfg = sdram_cfg; - asm("sync;isync"); + sync(); + isync(); udelay(500); debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg); @@ -843,6 +845,22 @@ long int spd_sdram() #endif /* CONFIG_SPD_EEPROM */ #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) +static inline u32 mftbu(void) +{ + u32 rval; + + asm volatile("mftbu %0" : "=r" (rval)); + return rval; +} + +static inline u32 mftb(void) +{ + u32 rval; + + asm volatile("mftb %0" : "=r" (rval)); + return rval; +} + /* * Use timebase counter, get_timer() is not available * at this point of initialization yet. @@ -858,9 +876,9 @@ static __inline__ unsigned long get_tbms (void) /* get the timebase ticks */ do { - asm volatile ("mftbu %0":"=r" (tbu1):); - asm volatile ("mftb %0":"=r" (tbl):); - asm volatile ("mftbu %0":"=r" (tbu2):); + tbu1 = mftbu(); + tbl = mftb(); + tbu2 = mftbu(); } while (tbu1 != tbu2); /* convert ticks to ms */ @@ -897,7 +915,7 @@ void ddr_enable_ecc(unsigned int dram_size) for (p = 0; p < (u64*)(size); p++) { ppcDWstore((u32*)p, pattern); } - __asm__ __volatile__ ("sync"); + sync(); #endif t_end = get_tbms(); @@ -922,8 +940,8 @@ void ddr_enable_ecc(unsigned int dram_size) /* Enable errors for ECC */ ddr->err_disable &= ECC_ERROR_ENABLE; - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); + sync(); + isync(); } #endif /* CONFIG_DDR_ECC */ diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index 39bc1c5340..e118a10fa8 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -85,35 +85,35 @@ int get_clocks(void) u32 lcrr; u32 csb_clk; -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) u32 usbdr_clk; #endif -#ifdef CONFIG_MPC834x +#ifdef CONFIG_ARCH_MPC834X u32 usbmph_clk; #endif u32 core_clk; u32 i2c1_clk; -#if !defined(CONFIG_MPC832x) +#if !defined(CONFIG_ARCH_MPC832X) u32 i2c2_clk; #endif -#if defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC8315) u32 tdm_clk; #endif #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif -#if !defined(CONFIG_MPC8309) +#if !defined(CONFIG_ARCH_MPC8309) u32 enc_clk; #endif u32 lbiu_clk; u32 lclk_clk; u32 mem_clk; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) u32 mem_sec_clk; #endif #if defined(CONFIG_QE) @@ -122,12 +122,12 @@ int get_clocks(void) u32 qe_clk; u32 brg_clk; #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) u32 pciexp1_clk; u32 pciexp2_clk; #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) u32 sata_clk; #endif @@ -137,8 +137,8 @@ int get_clocks(void) clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT); if (im->reset.rcwh & HRCWH_PCI_HOST) { -#if defined(CONFIG_83XX_CLKIN) - pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div); +#if defined(CONFIG_SYS_CLK_FREQ) + pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div); #else pci_sync_in = 0xDEADBEEF; #endif @@ -155,8 +155,8 @@ int get_clocks(void) sccr = im->clk.sccr; -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) { case 0: tsec1_clk = 0; @@ -176,8 +176,8 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { case 0: usbdr_clk = 0; @@ -197,8 +197,8 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) { case 0: tsec2_clk = 0; @@ -216,7 +216,7 @@ int get_clocks(void) /* unknown SCCR_TSEC2CM value */ return -4; } -#elif defined(CONFIG_MPC8313) +#elif defined(CONFIG_ARCH_MPC8313) tsec2_clk = tsec1_clk; if (!(sccr & SCCR_TSEC1ON)) @@ -225,7 +225,7 @@ int get_clocks(void) tsec2_clk = 0; #endif -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) { case 0: usbmph_clk = 0; @@ -252,7 +252,7 @@ int get_clocks(void) return -6; } #endif -#if !defined(CONFIG_MPC8309) +#if !defined(CONFIG_ARCH_MPC8309) switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { case 0: enc_clk = 0; @@ -291,7 +291,7 @@ int get_clocks(void) return -8; } #endif -#if defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC8315) switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) { case 0: tdm_clk = 0; @@ -311,27 +311,27 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) i2c1_clk = tsec2_clk; -#elif defined(CONFIG_MPC8360) +#elif defined(CONFIG_ARCH_MPC8360) i2c1_clk = csb_clk; -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_ARCH_MPC832X) i2c1_clk = enc_clk; -#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) +#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) i2c1_clk = enc_clk; #elif defined(CONFIG_FSL_ESDHC) i2c1_clk = sdhc_clk; -#elif defined(CONFIG_MPC837x) +#elif defined(CONFIG_ARCH_MPC837X) i2c1_clk = enc_clk; -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) i2c1_clk = csb_clk; #endif -#if !defined(CONFIG_MPC832x) +#if !defined(CONFIG_ARCH_MPC832X) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) { case 0: pciexp1_clk = 0; @@ -369,7 +369,7 @@ int get_clocks(void) } #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) { case 0: sata_clk = 0; @@ -407,7 +407,7 @@ int get_clocks(void) (1 + ((im->clk.spmr & SPMR_DDRCM) >> SPMR_DDRCM_SHIFT)); corepll = (im->clk.spmr & SPMR_COREPLL) >> SPMR_COREPLL_SHIFT; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) mem_sec_clk = csb_clk * (1 + ((im->clk.spmr & SPMR_LBIUCM) >> SPMR_LBIUCM_SHIFT)); #endif @@ -448,18 +448,18 @@ int get_clocks(void) #endif gd->arch.csb_clk = csb_clk; -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) gd->arch.tsec1_clk = tsec1_clk; gd->arch.tsec2_clk = tsec2_clk; gd->arch.usbdr_clk = usbdr_clk; -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) gd->arch.usbdr_clk = usbdr_clk; #endif -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) gd->arch.usbmph_clk = usbmph_clk; #endif -#if defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC8315) gd->arch.tdm_clk = tdm_clk; #endif #if defined(CONFIG_FSL_ESDHC) @@ -467,28 +467,28 @@ int get_clocks(void) #endif gd->arch.core_clk = core_clk; gd->arch.i2c1_clk = i2c1_clk; -#if !defined(CONFIG_MPC832x) +#if !defined(CONFIG_ARCH_MPC832X) gd->arch.i2c2_clk = i2c2_clk; #endif -#if !defined(CONFIG_MPC8309) +#if !defined(CONFIG_ARCH_MPC8309) gd->arch.enc_clk = enc_clk; #endif gd->arch.lbiu_clk = lbiu_clk; gd->arch.lclk_clk = lclk_clk; gd->mem_clk = mem_clk; -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) gd->arch.mem_sec_clk = mem_sec_clk; #endif #if defined(CONFIG_QE) gd->arch.qe_clk = qe_clk; gd->arch.brg_clk = brg_clk; #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) gd->arch.pciexp1_clk = pciexp1_clk; gd->arch.pciexp2_clk = pciexp2_clk; #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) gd->arch.sata_clk = sata_clk; #endif gd->pci_clk = pci_sync_in; @@ -516,6 +516,11 @@ ulong get_ddr_freq(ulong dummy) return gd->mem_clk; } +int get_serial_clock(void) +{ + return get_bus_freq(0); +} + static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; @@ -536,21 +541,21 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->arch.lclk_clk)); printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk)); -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->arch.mem_sec_clk)); #endif -#if !defined(CONFIG_MPC8309) +#if !defined(CONFIG_ARCH_MPC8309) printf(" SEC: %-4s MHz\n", strmhz(buf, gd->arch.enc_clk)); #endif printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->arch.i2c1_clk)); -#if !defined(CONFIG_MPC832x) +#if !defined(CONFIG_ARCH_MPC832X) printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->arch.i2c2_clk)); #endif -#if defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC8315) printf(" TDM: %-4s MHz\n", strmhz(buf, gd->arch.tdm_clk)); #endif @@ -558,30 +563,30 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->arch.sdhc_clk)); #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->arch.tsec1_clk)); printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->arch.tsec2_clk)); printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->arch.usbdr_clk)); -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->arch.usbdr_clk)); #endif -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->arch.usbmph_clk)); #endif -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->arch.pciexp1_clk)); printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->arch.pciexp2_clk)); #endif -#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) printf(" SATA: %-4s MHz\n", strmhz(buf, gd->arch.sata_clk)); #endif diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 746f1febba..133f7abc31 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -6,6 +6,9 @@ #include <common.h> #include <mpc83xx.h> +#include "lblaw/lblaw.h" +#include "elbc/elbc.h" + DECLARE_GLOBAL_DATA_PTR; /* @@ -24,16 +27,16 @@ void cpu_init_f (volatile immap_t * im) /* system performance tweaking */ -#ifdef CONFIG_SYS_ACR_PIPE_DEP +#ifndef CONFIG_ACR_PIPE_DEP_UNSET /* Arbiter pipeline depth */ im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); + CONFIG_ACR_PIPE_DEP; #endif -#ifdef CONFIG_SYS_ACR_RPTCNT +#ifndef CONFIG_ACR_RPTCNT_UNSET /* Arbiter repeat count */ im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) | - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT); + CONFIG_ACR_RPTCNT; #endif #ifdef CONFIG_SYS_SPCR_OPT @@ -89,3 +92,11 @@ void puts(const char *str) while (*str) putc(*str++); } + +ulong get_bus_freq(ulong dummy) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u8 spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; + + return CONFIG_SYS_CLK_FREQ * spmf; +} diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index c00bb31363..f4a8a766c3 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -24,6 +24,10 @@ #include <asm/mmu.h> #include <asm/u-boot.h> +#include "hrcw/hrcw.h" +#include "bats/bats.h" +#include "hid/hid.h" + /* We don't want the MMU yet. */ #undef MSR_KERNEL @@ -115,18 +119,6 @@ disable_addr_trans: mtspr SRR1, r3 rfi - .globl ppcDWstore -ppcDWstore: - lfd 1, 0(r4) - stfd 1, 0(r3) - blr - - .globl ppcDWload -ppcDWload: - lfd 1, 0(r3) - stfd 1, 0(r4) - blr - #ifndef CONFIG_DEFAULT_IMMR #error CONFIG_DEFAULT_IMMR must be defined #endif /* CONFIG_DEFAULT_IMMR */ diff --git a/arch/powerpc/cpu/mpc83xx/sysio/Kconfig b/arch/powerpc/cpu/mpc83xx/sysio/Kconfig new file mode 100644 index 0000000000..9e1f158712 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/sysio/Kconfig @@ -0,0 +1,7 @@ +menu "System I/O configuration" + +if ARCH_MPC8308 +source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308" +endif + +endmenu diff --git a/arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308 b/arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308 new file mode 100644 index 0000000000..de62171b30 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308 @@ -0,0 +1,323 @@ +choice + prompt "SPI group" + +config SICR_SPI_SPI + bool "SPI" + +config SICR_SPI_MSRCID + bool "MSRCID" + +config SICR_SPI_LSRCID + bool "LSRCID" + +endchoice + +choice + prompt "UART group" + +config SICR_UART_SPI + bool "UART" + +config SICR_UART_MSRCID + bool "MSRCID" + +config SICR_UART_LSRCID + bool "LSRCID" + +endchoice + +choice + prompt "IRQ group" + +config SICR_IRQ_SPI + bool "IRQ" + +config SICR_IRQ_MCP_CKSTOP + bool "MCP/CKSTOP" + +config SICR_IRQ_INTA + bool "INTA" + +endchoice + +choice + prompt "I2C2 group" + +config SICR_I2C2_I2C + bool "IRQ" + +config SICR_I2C2_CKSTOP + bool "CKSTOP" + +endchoice + +choice + prompt "ETSEC1 A group" + +config SICR_ETSEC1_A_TSEC2 + bool "TSEC1" + +config SICR_ETSEC1_A_TSEC_GTX_CLK125 + bool "TSEC1 GTX_CLK125" + +endchoice + +choice + prompt "eSDHC A group" + +config SICR_ESDHC_A_SD + bool "SD" + +config SICR_ESDHC_A_GTM + bool "GTM" + +config SICR_ESDHC_A_GPIO + bool "GPIO" + +endchoice + +choice + prompt "eSDHC B group" + +config SICR_ESDHC_B_SD + bool "SD" + +config SICR_ESDHC_B_GTM + bool "GTM" + +config SICR_ESDHC_B_GPIO + bool "GPIO" + +endchoice + +choice + prompt "eSDHC C group" + +config SICR_ESDHC_C_SD + bool "SD" + +config SICR_ESDHC_C_GTM + bool "GTM" + +config SICR_ESDHC_C_GPIO + bool "GPIO" + +endchoice + +choice + prompt "GPIO A group" + +config SICR_GPIO_A_GPIO + bool "GPIO" + +config SICR_GPIO_A_TSEC2 + bool "TSEC2" + +endchoice + +choice + prompt "GPIO B group" + +config SICR_GPIO_B_GPIO + bool "GPIO" + +config SICR_GPIO_B_TSEC2 + bool "TSEC2" + +config SICR_GPIO_B_TSEC_GTX_CLK125 + bool "TSEC2 GTX_CLK125" + +endchoice + +choice + prompt "IEEE1588 A group" + +config SICR_IEEE1588_A_TSEC + bool "TSEC" + +config SICR_IEEE1588_A_GPIO + bool "GPIO" + +endchoice + +choice + prompt "USB group" + +config SICR_USB_TSEC + bool "USB" + +endchoice + +choice + prompt "GTM group" + +config SICR_GTM_TSEC + bool "GTM" + +config SICR_GTM_GPIO + bool "GPIO" + +endchoice + +choice + prompt "IEEE1588 B group" + +config SICR_IEEE1588_B_GPIO + bool "GPIO" + +endchoice + +choice + prompt "ETSEC2 group" + +config SICR_ETSEC2_TSEC2 + bool "TSEC2" + +config SICR_ETSEC2_GPIO + bool "GPIO" + +endchoice + +choice + prompt "GPIO selection" + +config SICR_GPIOSEL_GPIO + bool "GPIO_A, GPIO_B" + +config SICR_GPIOSEL_IEEE1588 + bool "IEEE1588_A, IEEE1588_B, ETSEC2" + +endchoice + +choice + prompt "IEEE1588 timer output buffer impedance" + +config SICR_TMROBI_3_3_V + bool "40 Ohm, 3.3V" + +config SICR_TMROBI_2_5_V + bool "40 Ohm, 2.5V" + +endchoice + +choice + prompt "TSEC1 output buffer impedance" + +config SICR_TMSOBI1_3_3_V + bool "40 Ohm, 3.3V" + +config SICR_TMSOBI1_2_5_V + bool "40 Ohm, 2.5V" + +endchoice + +choice + prompt "TSEC2 output buffer impedance" + +config SICR_TMSOBI2_3_3_V + bool "40 Ohm, 3.3V" + +config SICR_TMSOBI2_2_5_V + bool "40 Ohm, 2.5V" + +endchoice + +config SICRL_SPI + hex + default 0x0 if SICR_SPI_SPI + default 0x10000000 if SICR_SPI_MSRCID + default 0x30000000 if SICR_SPI_LSRCID + +config SICRL_UART + hex + default 0x0 if SICR_UART_SPI + default 0x4000000 if SICR_UART_MSRCID + default 0xc000000 if SICR_UART_LSRCID + +config SICRL_IRQ + hex + default 0x0 if SICR_IRQ_SPI + default 0x1000000 if SICR_IRQ_MCP_CKSTOP + default 0x3000000 if SICR_IRQ_INTA + +config SICRL_I2C2 + hex + default 0x0 if SICR_I2C2_I2C + default 0x100000 if SICR_I2C2_CKSTOP + +config SICRL_ETSEC1_A + hex + default 0x0 if SICR_ETSEC1_A_TSEC2 + default 0x40 if SICR_ETSEC1_A_TSEC_GTX_CLK125 + +config SICRH_ESDHC_A + hex + default 0x0 if SICR_ESDHC_A_SD + default 0x40000000 if SICR_ESDHC_A_GTM + default 0xc0000000 if SICR_ESDHC_A_GPIO + +config SICRH_ESDHC_B + hex + default 0x0 if SICR_ESDHC_B_SD + default 0x10000000 if SICR_ESDHC_B_GTM + default 0x30000000 if SICR_ESDHC_B_GPIO + +config SICRH_ESDHC_C + hex + default 0x0 if SICR_ESDHC_C_SD + default 0x4000000 if SICR_ESDHC_C_GTM + default 0xc000000 if SICR_ESDHC_C_GPIO + +config SICRH_GPIO_A + hex + default 0x0 if SICR_GPIO_A_GPIO + default 0x1000000 if SICR_GPIO_A_TSEC2 + +config SICRH_GPIO_B + hex + default 0x0 if SICR_GPIO_B_GPIO + default 0x400000 if SICR_GPIO_B_TSEC2 + default 0x800000 if SICR_GPIO_B_TSEC_GTX_CLK125 + +config SICRH_IEEE1588_A + hex + default 0x100000 if SICR_IEEE1588_A_TSEC + default 0x300000 if SICR_IEEE1588_A_GPIO + +config SICRH_USB + hex + default 0x40000 if SICR_USB_TSEC + +config SICRH_GTM + hex + default 0x10000 if SICR_GTM_TSEC + default 0x30000 if SICR_GTM_GPIO + +config SICRH_IEEE1588_B + hex + default 0xc000 if SICR_IEEE1588_B_GPIO + +config SICRH_ETSEC2 + hex + default 0x1000 if SICR_ETSEC2_TSEC2 + default 0x3000 if SICR_ETSEC2_GPIO + +config SICRH_GPIOSEL + hex + default 0x0 if SICR_GPIOSEL_GPIO + default 0x100 if SICR_GPIOSEL_IEEE1588 + +config SICRH_TMROBI + hex + default 0x0 if SICR_TMROBI_3_3_V + default 0x10 if SICR_TMROBI_2_5_V + +config SICRH_TMSOBI1 + hex + default 0x0 if SICR_TMSOBI1_3_3_V + default 0x2 if SICR_TMSOBI1_2_5_V + +config SICRH_TMSOBI2 + hex + default 0x0 if SICR_TMSOBI2_3_3_V + default 0x1 if SICR_TMSOBI2_2_5_V diff --git a/arch/powerpc/cpu/mpc83xx/sysio/sysio.h b/arch/powerpc/cpu/mpc83xx/sysio/sysio.h new file mode 100644 index 0000000000..f8c2f104c1 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/sysio/sysio.h @@ -0,0 +1,32 @@ +#ifdef CONFIG_ARCH_MPC8308 + +#ifndef CONFIG_SYS_SICRL +#define CONFIG_SYS_SICRL (\ + CONFIG_SICRL_SPI |\ + CONFIG_SICRL_UART |\ + CONFIG_SICRL_IRQ |\ + CONFIG_SICRL_I2C2 |\ + CONFIG_SICRL_ETSEC1_A \ +) +#endif + +#ifndef CONFIG_SYS_SICRH +#define CONFIG_SYS_SICRH (\ + CONFIG_SICRH_ESDHC_A |\ + CONFIG_SICRH_ESDHC_B |\ + CONFIG_SICRH_ESDHC_C |\ + CONFIG_SICRH_GPIO_A |\ + CONFIG_SICRH_GPIO_B |\ + CONFIG_SICRH_IEEE1588_A |\ + CONFIG_SICRH_USB |\ + CONFIG_SICRH_GTM |\ + CONFIG_SICRH_IEEE1588_B |\ + CONFIG_SICRH_ETSEC2 |\ + CONFIG_SICRH_GPIOSEL |\ + CONFIG_SICRH_TMROBI |\ + CONFIG_SICRH_TMSOBI1 |\ + CONFIG_SICRH_TMSOBI2 \ +) +#endif + +#endif diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index 37a13fd8c2..d10f528da4 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -52,6 +52,12 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; + /* + * _end - This is end of u-boot.bin image. + * dtb will be appended here to make u-boot-dtb.bin + */ + _end = .; + . = ALIGN(4096); __init_begin = .; .text.init : { *(.text.init) } diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index 13545fc6ad..c43732f7c5 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -6,6 +6,10 @@ #include <common.h> #include <asm/fsl_lbc.h> +#ifdef CONFIG_MPC83xx +#include "../mpc83xx/elbc/elbc.h" +#endif + #ifdef CONFIG_MPC85xx /* Boards should provide their own version of this if they use lbc sdram */ static void __lbc_sdram_init(void) diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c index 23cc5a32ac..d81af70f44 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -131,10 +131,10 @@ static int pamu_config_ppaace(uint32_t liodn, uint64_t win_addr, set_bf(ppaace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL); } - asm volatile("sync" : : : "memory"); + sync(); /* Mark the ppace entry valid */ ppaace->addr_bitfields |= PAACE_V_VALID; - asm volatile("sync" : : : "memory"); + sync(); return 0; } @@ -279,7 +279,7 @@ int pamu_init(void) out_be32(®s->splah, spaact_lim >> 32); out_be32(®s->splal, (uint32_t)spaact_lim); } - asm volatile("sync" : : : "memory"); + sync(); base_addr += PAMU_OFFSET; } @@ -294,7 +294,7 @@ void pamu_enable(void) for (i = 0; i < CONFIG_NUM_PAMU; i++) { setbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE); - asm volatile("sync" : : : "memory"); + sync(); base_addr += PAMU_OFFSET; } } @@ -318,7 +318,7 @@ void pamu_reset(void) out_be32(®s->splal, 0); clrbits_be32((void *)regs + PAMU_PCR_OFFSET, PAMU_PCR_PE); - asm volatile("sync" : : : "memory"); + sync(); base_addr += PAMU_OFFSET; } } @@ -331,7 +331,7 @@ void pamu_disable(void) for (i = 0; i < CONFIG_NUM_PAMU; i++) { clrbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE); - asm volatile("sync" : : : "memory"); + sync(); base_addr += PAMU_OFFSET; } } diff --git a/arch/powerpc/dts/.gitignore b/arch/powerpc/dts/.gitignore new file mode 100644 index 0000000000..b60ed208c7 --- /dev/null +++ b/arch/powerpc/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile index f080a96891..6a28f802c2 100644 --- a/arch/powerpc/dts/Makefile +++ b/arch/powerpc/dts/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb +dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb targets += $(dtb-y) diff --git a/arch/powerpc/dts/gazerbeam.dts b/arch/powerpc/dts/gazerbeam.dts new file mode 100644 index 0000000000..96c03c77ae --- /dev/null +++ b/arch/powerpc/dts/gazerbeam.dts @@ -0,0 +1,602 @@ +/* + * Gazerbeam CON Device Tree Source + * + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include "gdsys/mpc8308.dtsi" + +/include/ "gdsys/gazerbeam-base.dtsi" + +/include/ "gdsys/soc/i2c/cirrus-audio-codec.dtsi" +/include/ "gdsys/soc/i2c/dallas-rtc.dtsi" +/include/ "gdsys/soc/lbc/gazerbeam.dtsi" +/include/ "gdsys/soc/nor/flash-80k-partition.dtsi" + +&board_lbc { + FPGA0:iocon_uart@1,0 { + reg = <0x1 0x0 0x100000>; + little-endian; + interrupts = <48 0x8>; + interrupt-parent = <&ipic>; + }; + + FPGA1:iocon_uart@2,0 { + reg = <0x2 0x0 0x100000>; + little-endian; + interrupts = <17 0x8>; + interrupt-parent = <&ipic>; + }; +}; + +&FPGA0 { + compatible = "gdsys,iocon_fpga"; + #gpio-cells = <2>; + gpio-controller; + bus = <&FPGA0BUS>; + unit_id = <0>; + fpga-type = <1>; + usb_base = <0x0080>; + audio_base = <0x0040>; + timebase_base = <0x013c>; + + /* + * for every interrupt source there must be a dataset specifying + * 1. type (1: standard) + * 2. status register offset + * 3. mask register offset + * 4. default mask + */ + fpga_interrupt_sources = + <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */ + <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */ + /* + * for every interrupt there must be a dataset specifying + * 1. type (1: status, 2: event) + * 2. interrupt source index + * 3. interrupt register bit + * 4. mask register bit + */ + #fpga_interrupt_map-cells = <4>; + fpga_interrupt_map = + <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */ + <1 0 0 0>, /* 1: VIDEO 0 */ + <1 0 1 1>, /* 2: VIDEO 1 */ + <1 0 2 2>, /* 3: VIDEO IC 0 */ + <1 0 3 3>, /* 4: VIDEO IC 1 */ + <1 0 4 4>, /* 5: IIC MAIN */ + <1 0 6 6>, /* 6: IIC VIDEO 0 */ + <1 0 7 7>, /* 7: IIC VIDEO 1 */ + <1 1 0 0>, /* 8: OSD 0 */ + <1 1 1 1>, /* 9: OSD 1 */ + <1 1 2 2>, /* 10: SPDIF 0 */ + <1 1 3 3>, /* 11: SPDIF 1 */ + <1 0 12 12>, /* 12: COMM 0 */ + <1 0 13 13>, /* 13: COMM 1 */ + <1 0 10 10>, /* 14: COMM 2 */ + <1 0 11 11>, /* 15: COMM 3 */ + <2 0 5 5>, /* 16: MDIO */ + <1 0 8 8>, /* 17: PHY */ + <1 1 4 4>, /* 18: RS232 */ + <1 1 5 5>, /* 19: AUDIO */ + <1 1 8 8>, /* 20: PROC_AUDIO */ + <1 1 7 7>, /* 21: USB/ETH-UART INT */ + <2 1 10 10>, /* 22: AXI Bridge 0 */ + <2 1 11 11>, /* 23: AXI Bridge 1 */ + <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */ + <>; +}; + +&FPGA1 { + compatible = "gdsys,iocon_fpga"; + #gpio-cells = <2>; + gpio-controller; + bus = <&FPGA1BUS>; + unit_id = <1>; + fpga-type = <1>; + usb_base = <0x0070>; + audio_base = <0x0040>; + timebase_base = <0x013c>; + + /* + * for every interrupt source there must be a dataset specifying + * 1. type (1: standard) + * 2. status register offset + * 3. mask register offset + * 4. default mask + */ + fpga_interrupt_sources = + <1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */ + <1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */ + /* + * for every interrupt there must be a dataset specifying + * 1. type (1: status, 2: event) + * 2. interrupt source index + * 3. interrupt register bit + * 4. mask register bit + */ + #fpga_interrupt_map-cells = <4>; + fpga_interrupt_map = + <1 0 14 14>, /* 0: EXTENDED_INTERRUPT */ + <1 0 0 0>, /* 1: VIDEO 0 */ + <1 0 1 1>, /* 2: VIDEO 1 */ + <1 0 2 2>, /* 3: VIDEO IC 0 */ + <1 0 3 3>, /* 4: VIDEO IC 1 */ + <1 0 4 4>, /* 5: IIC MAIN */ + <1 0 6 6>, /* 6: IIC VIDEO 0 */ + <1 0 7 7>, /* 7: IIC VIDEO 1 */ + <1 1 0 0>, /* 8: OSD 0 */ + <1 1 1 1>, /* 9: OSD 1 */ + <1 1 2 2>, /* 10: SPDIF 0 */ + <1 1 3 3>, /* 11: SPDIF 1 */ + <1 0 12 12>, /* 12: COMM 0 */ + <1 0 13 13>, /* 13: COMM 1 */ + <1 0 10 10>, /* 14: COMM 2 */ + <1 0 11 11>, /* 15: COMM 3 */ + <2 0 5 5>, /* 16: MDIO */ + <1 0 8 8>, /* 17: PHY */ + <1 1 4 4>, /* 18: RS232 */ + <1 1 5 5>, /* 19: AUDIO */ + <1 1 8 8>, /* 20: PROC_AUDIO */ + <1 1 7 7>, /* 21: USB/ETH-UART INT */ + <2 1 10 10>, /* 22: AXI Bridge 0 */ + <2 1 11 11>, /* 23: AXI Bridge 1 */ + <2 1 9 9>, /* 24: USB/ETH-Secondary IIC */ + <>; +}; + +/ { + FPGA0BUS: fpga0bus { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x00002000>; + + compatible = "gdsys,soc"; + + fpga0_rs232 { + compatible = "gdsys,ihs_trans_rs232"; + reg = <0x50 0x08>; + little-endian; + }; + + fpga0_uart_usb { + compatible = "gdsys,ihs_simple_uart"; + reg = <0xa0 0x08>; + little-endian; + fpga_interrupts = <21>; + line = <0>; + }; + + fpga0_iic_main { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x60 0x10>; + little-endian; + fpga_interrupts = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_dp_video0_redriver: fpga0_dp_video0_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2c>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + fpga0_dp_video1_redriver: fpga0_dp_video1_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2e>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + ads1015@4b { + compatible = "ti,ads1015"; + reg = <0x4b>; + }; + }; + + fpga0_video0 { + compatible = "gdsys,ihs_video_out"; + reg = <0x100 0x40>; + little-endian; + fpga_interrupts = <1 8>; /* VIDEO OSD */ + osd_base = <0x180>; + osd_buffer_base = <0x1000>; + spdif_audio_base = <0x1e0>; + video_index = <0>; + video_id = <0>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga0_dp_video0>; + clk_gen = <&fpga0_video0_clkgen>; + ddc_ci = <&fpga0_dp_video0>; + }; + + fpga0_iic_video0 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x1c0 0x10>; + little-endian; + fpga_interrupts = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_video0_clkgen: fpga0_video0_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <0>; + }; + }; + + fpga0_axi_video0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x170 0x10>; + little-endian; + fpga_interrupts = <22>; + + fpga0_dp_video0: fpga0_dp_video0 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga0_dp_video0_redriver>; + video_id = <0>; + }; + }; + + fpga0_video1 { + compatible = "gdsys,ihs_video_out"; + reg = <0x200 0x40>; + little-endian; + fpga_interrupts = <2 9>; /* VIDEO OSD */ + osd_base = <0x280>; + osd_buffer_base = <0x2000>; + spdif_audio_base = <0x2e0>; + video_index = <1>; + video_id = <1>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga0_dp_video1>; + clk_gen = <&fpga0_video1_clkgen>; + ddc_ci = <&fpga0_dp_video1>; + }; + + fpga0_iic_video1 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x2c0 0x10>; + little-endian; + fpga_interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_video1_clkgen: fpga0_video1_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <1>; + }; + }; + + fpga0_axi_video1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x270 0x10>; + little-endian; + fpga_interrupts = <23>; + + fpga0_dp_video1: fpga0_dp_video1 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga0_dp_video1_redriver>; + video_id = <1>; + }; + }; + + fpga0_iic_usb { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0xb0 0x10>; + little-endian; + fpga_interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + fpga0_ep0 { + compatible = "gdsys,io-endpoint"; + reg = < 0x020 0x10 + 0x320 0x10 + 0x340 0x10 + 0x360 0x10>; + little-endian; + irq-model-local; + fpga_interrupts = <12 13 14 15>; + pollcycle = <200>; + nprot_channel = <16>; + uart_line = <0>; + ep_index = <0>; + line_protocol = <1>; + }; + + fpga0_mdio { + compatible = "gdsys,ihs_mdiomaster"; + reg = <0x0058 0x10>; + little-endian; + fpga_interrupts = <16>; + #address-cells = <1>; + #size-cells = <0>; + + fpga0_phy0 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <0>; + }; + fpga0_phy1 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <1>; + }; + fpga0_phy2 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <2>; + }; + fpga0_phy3 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <3>; + }; + }; + + }; + + + FPGA1BUS: fpga1bus { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x00002000>; + + compatible = "gdsys,soc"; + + fpga1_uart_usb { + compatible = "gdsys,ihs_simple_uart"; + reg = <0xa0 0x08>; + little-endian; + fpga_interrupts = <21>; + line = <4>; /* TODO check and FIX */ + }; + + fpga1_iic_main { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x60 0x10>; + little-endian; + fpga_interrupts = <5>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_dp_video0_redriver: fpga1_dp_video0_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2c>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + fpga1_dp_video1_redriver: fpga1_dp_video1_redriver { + compatible = "ti,sn75dp130"; + reg = <0x2e>; + eq-i2c-enable = <3 2 1 0 + 3 2 1 0 + 3 2 1 0 + 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */ + }; + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + ads1015@4b { + compatible = "ti,ads1015"; + reg = <0x4b>; + }; + }; + + fpga1_video0 { + compatible = "gdsys,ihs_video_out"; + reg = <0x100 0x40>; + little-endian; + fpga_interrupts = <1 8>; /* VIDEO OSD */ + osd_base = <0x180>; + osd_buffer_base = <0x1000>; + spdif_audio_base = <0x1e0>; + video_index = <0>; + video_id = <4>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga1_dp_video0>; + clk_gen = <&fpga1_video0_clkgen>; + ddc_ci = <&fpga1_dp_video0>; + }; + + fpga1_iic_video0 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x1c0 0x10>; + little-endian; + fpga_interrupts = <6>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_video0_clkgen: fpga1_video0_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <4>; + }; + }; + + fpga1_axi_video0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x170 0x10>; + little-endian; + fpga_interrupts = <22>; + + fpga1_dp_video0: fpga1_dp_video0 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga1_dp_video0_redriver>; + video_id = <4>; + }; + }; + + fpga1_video1 { + compatible = "gdsys,ihs_video_out"; + reg = <0x200 0x40>; + little-endian; + fpga_interrupts = <2 9>; /* VIDEO OSD */ + osd_base = <0x280>; + osd_buffer_base = <0x2000>; + spdif_audio_base = <0x2e0>; + video_index = <1>; + video_id = <5>; + fpga-force-pos-pol; + sync-source; + fpga-pb-pixels = <2730>; /* 8192 / 3 */ + fpga-ra-lines = <2>; + video_tx = <&fpga1_dp_video1>; + clk_gen = <&fpga1_video1_clkgen>; + ddc_ci = <&fpga1_dp_video1>; + }; + + fpga1_iic_video1 { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0x2c0 0x10>; + little-endian; + fpga_interrupts = <7>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_video1_clkgen: fpga1_video1_clkgen { + compatible = "idt,ics8n3qv01"; + reg = <0x6e>; + channel = <5>; + }; + }; + + fpga1_axi_video1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "gdsys,ihs_axi"; + reg = <0x270 0x10>; + little-endian; + fpga_interrupts = <23>; + + fpga1_dp_video1: fpga1_dp_video1 { + compatible = "gdsys,logicore_dp_tx"; + reg = <0x44a10000 0x1000>; + little-endian; + redriver = <&fpga1_dp_video1_redriver>; + video_id = <5>; + }; + }; + + fpga1_iic_usb { + compatible = "gdsys,ihs_i2cmaster"; + reg = <0xb0 0x10>; + little-endian; + fpga_interrupts = <24>; + #address-cells = <1>; + #size-cells = <0>; + + pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + + fpga1_ep0 { + compatible = "gdsys,io-endpoint"; + reg = < 0x020 0x10 + 0x320 0x10 + 0x340 0x10 + 0x360 0x10>; + little-endian; + irq-model-local; + fpga_interrupts = <12 13 14 15>; + pollcycle = <200>; + nprot_channel = <17>; + uart_line = <1>; + ep_index = <0>; + line_protocol = <1>; + }; + + fpga1_mdio { + compatible = "gdsys,ihs_mdiomaster"; + reg = <0x0058 0x10>; + little-endian; + fpga_interrupts = <16>; + #address-cells = <1>; + #size-cells = <0>; + + fpga1_phy0 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <0>; + }; + fpga1_phy1 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <1>; + }; + fpga1_phy2 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <2>; + }; + fpga1_phy3 { + compatible = "ethernet-phy-ieee802.3-c45"; + device_type ="ethernet-phy"; + reg = <3>; + }; + }; + + }; + +}; + +#include "gdsys/gazerbeam-uboot.dtsi" diff --git a/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi new file mode 100644 index 0000000000..aca05f2cd0 --- /dev/null +++ b/arch/powerpc/dts/gdsys/gazerbeam-base.dtsi @@ -0,0 +1,185 @@ +/* + * Gazerbeam Device Tree Source + * + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "gdsys,gazerbeam"; + compatible = "fsl,mpc8308rdb"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + memory { + device_type = "memory"; + }; +}; + +&enet1 { + status = "okay"; +}; + +&IIC { + fsl,preserve-clocking; + + at97sc3205t@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; + + lm77@48 { + compatible = "national,lm77"; + reg = <0x48>; + }; + + ads1015@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + }; + + lm77@4a { + compatible = "national,lm77"; + reg = <0x4a>; + }; + + emc2305@2e { + compatible = "smsc,emc2305"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2e>; + fan@0 { + reg = <0>; + }; + fan@1 { + reg = <1>; + }; + fan@2 { + reg = <2>; + }; + fan@3 { + reg = <3>; + }; + fan@4 { + reg = <4>; + }; + }; + + emc2305@4c { + compatible = "smsc,emc2305"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4c>; + fan@0 { + reg = <0>; + }; + fan@1 { + reg = <1>; + }; + fan@2 { + reg = <2>; + }; + fan@3 { + reg = <3>; + }; + fan@4 { + reg = <4>; + }; + }; + + at24c512@54 { + compatible = "atmel,24c512"; + reg = <0x54>; + }; + + /* PPC-Board */ + pca9698@22 { + compatible = "nxp,pca9698"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* IO-Board */ + pca9698@20 { + compatible = "nxp,pca9698"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&IIC2 { + fsl,preserve-clocking; + + status = "okay"; + + /* MC2/SC-Board */ + GPIO_VB0: pca9698@20 { + compatible = "nxp,pca9698"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + + /* MC4-Board */ + GPIO_VB1: pca9698@22 { + compatible = "nxp,pca9698"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&SPI { + gpios = < /*SPI-CSS-FPGA-U-FLASH#*/ &gpio0 8 0 + /*SPI-CSS-FPGA-O-FLASH#*/ &gpio0 6 0 + /*SPI-CSS-STDP1_U-FLASH#*/ &gpio0 12 0 + /*SPI-CSS-STDP2_U-FLASH#*/ &gpio0 11 0 + /*SPI-CSS-STDP1_O-FLASH#*/ &gpio0 15 0 + /*SPI-CSS-STDP2_O-FLASH#*/ &gpio0 3 0>; + + m25p16@0 { + compatible = "st,n25q128a11"; + reg = <0x0>; + spi-max-frequency = <20000000>; + }; + + m25p16@1 { + compatible = "st,n25q128a11"; + reg = <0x1>; + spi-max-frequency = <20000000>; + }; + + m25p16@2 { + compatible = "st,m25p40"; + reg = <0x2>; + spi-max-frequency = <20000000>; + }; + + m25p16@3 { + compatible = "st,m25p40"; + reg = <0x3>; + spi-max-frequency = <20000000>; + }; + + m25p16@4 { + compatible = "st,m25p40"; + reg = <0x4>; + spi-max-frequency = <20000000>; + }; + + m25p16@5 { + compatible = "st,m25p40"; + reg = <0x5>; + spi-max-frequency = <20000000>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/gazerbeam-uboot.dtsi b/arch/powerpc/dts/gdsys/gazerbeam-uboot.dtsi new file mode 100644 index 0000000000..1c4977f20f --- /dev/null +++ b/arch/powerpc/dts/gdsys/gazerbeam-uboot.dtsi @@ -0,0 +1,250 @@ +#include <dt-bindings/memory/mpc83xx-sdram.h> +#include <dt-bindings/clk/mpc83xx-clk.h> + +/ { + aliases { + i2c0 = &IIC; + i2c1 = &IIC2; + i2c2 = "/fpga0bus/fpga0_iic_main"; + i2c3 = "/fpga0bus/fpga0_iic_video0"; + i2c4 = "/fpga0bus/fpga0_iic_video1"; + i2c5 = "/fpga0bus/fpga0_iic_usb"; + gdsys_soc0 = "/fpga0bus"; + gdsys_soc1 = "/fpga1bus"; + ioep0 = "/fpga0bus/fpga0_ep0"; + ioep1 = "/fpga0bus/fpga1_ep0"; + }; + + chosen { + stdout-path = &serial1; + }; + + cpus { + compatible = "cpu_bus"; + u-boot,dm-pre-reloc; + + PowerPC,8308@0 { + compatible = "fsl,mpc8308"; + clocks = <&socclocks MPC83XX_CLK_CORE + &socclocks MPC83XX_CLK_CSB>; + u-boot,dm-pre-reloc; + }; + }; + + board { + compatible = "gdsys,board_gazerbeam"; + csb = <&board_soc>; + serdes = <&SERDES>; + rxaui0 = <&RXAUI0_0>; + rxaui1 = <&RXAUI0_1>; + rxaui2 = <&RXAUI0_2>; + rxaui3 = <&RXAUI0_3>; + rxaui4 = <&RXAUI1_0>; + rxaui5 = <&RXAUI1_1>; + rxaui6 = <&RXAUI1_2>; + rxaui7 = <&RXAUI1_3>; + fpga0 = <&FPGA0>; + fpga1 = <&FPGA1>; + ioep0 = <&IOEP0>; + ioep1 = <&IOEP1>; + + ver-gpios = <&PPCPCA 12 0 + &PPCPCA 13 0 + &PPCPCA 14 0 + &PPCPCA 15 0>; + + /* MC2/SC-Board */ + var-gpios-mc2 = <&GPIO_VB0 0 0 /* VAR-MC_SC */ + &GPIO_VB0 11 0>; /* VAR-CON */ + /* MC4-Board */ + var-gpios-mc4 = <&GPIO_VB1 0 0 /* VAR-MC_SC */ + &GPIO_VB1 11 0>; /* VAR-CON */ + + reset-gpios = <&gpio0 1 0 &gpio0 2 1>; + }; + + socclocks: clocks { + compatible = "fsl,mpc8308-clk"; + #clock-cells = <1>; + u-boot,dm-pre-reloc; + }; + + timer { + compatible = "fsl,mpc83xx-timer"; + clocks = <&socclocks MPC83XX_CLK_CSB>; + }; +}; + +&FPGA0 { + reset-gpios = <&PPCPCA 26 0>; + done-gpios = <&GPIO_VB0 19 0>; +}; + +&FPGA1 { + status = "disable"; +}; + +&FPGA0BUS { + ranges = <0x0 0xe0600000 0x00004000>; + fpga = <&FPGA0>; + + fpga0_video0 { + mode = "640_480_60"; + + status = "disabled"; + }; + + RXAUI0_0: fpga0_rxaui@fc0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fc0 0x10>; + }; + + fpga0_iic_video0 { + status = "disabled"; + }; + + fpga0_axi_video0 { + status = "disabled"; + }; + + fpga0_video1 { + mode = "640_480_60"; + status = "disabled"; + }; + + fpga0_iic_video1 { + status = "disabled"; + }; + + fpga0_axi_video1 { + status = "disabled"; + }; + + IOEP0: fpga0_ep0 { + }; + + RXAUI0_1: fpga0_rxaui@fd0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fd0 0x10>; + }; + + RXAUI0_2: fpga0_rxaui@fe0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fe0 0x10>; + }; + + RXAUI0_3: fpga0_rxaui@ff0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0ff0 0x10>; + }; +}; + +&FPGA1BUS { + ranges = <0x0 0xe0700000 0x00004000>; + fpga = <&FPGA1>; + + status = "disable"; + + fpga1_video0 { + mode = "640_480_60"; + }; + + RXAUI1_0: fpga0_rxaui@fc0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fc0 0x10>; + }; + + fpga1_video1 { + mode = "640_480_60"; + }; + + IOEP1: fpga1_ep0 { + }; + + RXAUI1_1: fpga0_rxaui@fd0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fd0 0x10>; + }; + + RXAUI1_2: fpga0_rxaui@fe0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0fe0 0x10>; + }; + + RXAUI1_3: fpga0_rxaui@ff0 { + compatible = "gdsys,rxaui_ctrl"; + reg = <0x0ff0 0x10>; + }; +}; + +&board_soc { + u-boot,dm-pre-reloc; + clocks = <&socclocks MPC83XX_CLK_CSB>; + + memory@2000 { + u-boot,dm-pre-reloc; + }; + + sdhc@2e000 { + clocks = <&socclocks MPC83XX_CLK_SDHC>; + clock-names = "per"; + }; + + SERDES: serdes@e3000 { + reg = <0xe3000 0x200>; + compatible = "fsl,mpc83xx-serdes"; + proto = "pex"; + serdes-clk = <100>; + vdd; + }; +}; + +&IIC { + clocks = <&socclocks MPC83XX_CLK_I2C1>; + + PPCPCA: pca9698@20 { + label = "ppc"; + }; + + IOPCA: pca9698@22 { + label = "io"; + }; + + at97sc3205t@29 { + u-boot,i2c-offset-len = <0>; + }; +}; + +&IIC2 { + clocks = <&socclocks MPC83XX_CLK_I2C2>; + + GPIO_VB0: pca9698@20 { + label = "mc2-sc"; + }; + + GPIO_VB1: pca9698@22 { + label = "mc4"; + }; +}; + +&board_soc { + u-boot,dm-pre-reloc; +}; + +&GPIO_VB0 { + u-boot,dm-pre-reloc; +}; + +&serial0 { + clocks = <&socclocks MPC83XX_CLK_CSB>; + u-boot,dm-pre-reloc; +}; + +&serial1 { + clocks = <&socclocks MPC83XX_CLK_CSB>; + u-boot,dm-pre-reloc; +}; + +&pci0 { + clocks = <&socclocks MPC83XX_CLK_PCIEXP1>; +}; diff --git a/arch/powerpc/dts/gdsys/mpc8308.dtsi b/arch/powerpc/dts/gdsys/mpc8308.dtsi new file mode 100644 index 0000000000..23e7403d91 --- /dev/null +++ b/arch/powerpc/dts/gdsys/mpc8308.dtsi @@ -0,0 +1,354 @@ +/* + * Basic platform for gdsys mpc8308 based devices + * + * (C) Copyright 2014 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * based on mpc8308rdb + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +#include <dt-bindings/memory/mpc83xx-sdram.h> + +/ { + compatible = "fsl,mpc8308rdb"; + + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + memory { + device_type = "memory"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + board_lbc: localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + }; + + board_soc: immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + memory@2000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc83xx-mem-controller"; + reg = <0x2000 0x1000>; + device_type = "memory"; + + driver_software_override = <DSO_ENABLE>; + p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>; + n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>; + odt_termination_value = <ODT_TERMINATION_150_OHM>; + ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>; + + clock_adjust = <CLOCK_ADJUST_05>; + + read_to_write = <0>; + write_to_read = <0>; + read_to_read = <0>; + write_to_write = <0>; + active_powerdown_exit = <2>; + precharge_powerdown_exit = <6>; + odt_powerdown_exit = <8>; + mode_reg_set_cycle = <2>; + + precharge_to_activate = <2>; + activate_to_precharge = <6>; + activate_to_readwrite = <2>; + mcas_latency = <CASLAT_40>; + refresh_recovery = <17>; + last_data_to_precharge = <2>; + activate_to_activate = <2>; + last_write_data_to_read = <2>; + + additive_latency = <0>; + mcas_to_preamble_override = <READ_LAT_PLUS_1_2>; + write_latency = <3>; + read_to_precharge = <2>; + write_cmd_to_write_data = <CLOCK_DELAY_1_2>; + minimum_cke_pulse_width = <3>; + four_activates_window = <5>; + + self_refresh = <SREN_ENABLE>; + sdram_type = <TYPE_DDR2>; + databus_width = <DATA_BUS_WIDTH_32>; + + force_self_refresh = <MODE_NORMAL>; + dll_reset = <DLL_RESET_ENABLE>; + dqs_config = <DQS_TRUE>; + odt_config = <ODT_ASSERT_READS>; + posted_refreshes = <1>; + + refresh_interval = <2084>; + precharge_interval = <256>; + + sdmode = <0x0242>; + esdmode = <0x0440>; + + ram@0 { + reg = <0x0 0x0 0x8000000>; + compatible = "nanya,nt5tu64m16hg"; + + odt_rd_cfg = <ODT_RD_NEVER>; + odt_wr_cfg = <ODT_WR_ONLY_CURRENT>; + bank_bits = <3>; + row_bits = <13>; + col_bits = <10>; + }; + }; + + IIC:i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + IIC2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + status = "disabled"; + }; + + SPI:spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + sdhc@2e000 { + compatible = "fsl,esdhc", "fsl,mpc8308-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,auto-cmd12; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio0: gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy1 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + phy2: ethernet-phy@0 { + reg = <0x0>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar", "fsl,tsec"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + status = "disabled"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi new file mode 100644 index 0000000000..9787e09648 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi @@ -0,0 +1,6 @@ +&IIC { + cs4265@4f { + compatible = "cirrus,cs4265"; + reg = <0x0000004f>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi new file mode 100644 index 0000000000..336bdcaf2e --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi @@ -0,0 +1,6 @@ +&IIC { + ds1339@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; diff --git a/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi new file mode 100644 index 0000000000..5ff58c28e5 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi @@ -0,0 +1,5 @@ +&board_lbc { + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00003000 + 0x2 0x0 0xe0700000 0x00003000>; +}; diff --git a/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi new file mode 100644 index 0000000000..c6cc1409e0 --- /dev/null +++ b/arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi @@ -0,0 +1,20 @@ +&board_lbc { + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x100000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x80000>; + }; + env@80000 { + reg = <0x80000 0x10000>; + }; + env1@90000 { + reg = <0x90000 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/include/asm/arch-mpc83xx/clock.h b/arch/powerpc/include/asm/arch-mpc83xx/clock.h new file mode 100644 index 0000000000..d57e93c2df --- /dev/null +++ b/arch/powerpc/include/asm/arch-mpc83xx/clock.h @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2018 + * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_POWERPC_CLOCK_H +#define __ASM_POWERPC_CLOCK_H + +/* Make fsl_esdhc driver happy */ +enum mxc_clock { + MXC_ESDHC_CLK, +}; + +DECLARE_GLOBAL_DATA_PTR; + +uint mxc_get_clock(int clk) +{ + return gd->arch.sdhc_clk; +} +#endif /* __ASM_POWERPC_CLOCK_H */ diff --git a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h index 57f783ba14..385d651d20 100644 --- a/arch/powerpc/include/asm/arch-mpc83xx/gpio.h +++ b/arch/powerpc/include/asm/arch-mpc83xx/gpio.h @@ -6,10 +6,10 @@ /* * The MCP83xx's 1-2 GPIO controllers each with 32 bits. */ -#if defined(CONFIG_MPC8313) || defined(CONFIG_MPC8308) || \ - defined(CONFIG_MPC8315) +#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \ + defined(CONFIG_ARCH_MPC8315) #define MPC83XX_GPIO_CTRLRS 1 -#elif defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) #define MPC83XX_GPIO_CTRLRS 2 #else #define MPC83XX_GPIO_CTRLRS 0 @@ -17,7 +17,15 @@ #define MAX_NUM_GPIOS (32 * MPC83XX_GPIO_CTRLRS) +struct mpc8xxx_gpio_plat { + ulong addr; + unsigned long size; + uint ngpios; +}; + +#ifndef DM_GPIO void mpc83xx_gpio_init_f(void); void mpc83xx_gpio_init_r(void); +#endif /* DM_GPIO */ #endif /* MPC83XX_GPIO_H_ */ diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index b076d5e838..bf352d9a56 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -43,10 +43,10 @@ void lbc_sdram_init(void); #define BR_MSEL 0x000000E0 #define BR_MSEL_SHIFT 5 #define BR_MS_GPCM 0x00000000 /* GPCM */ -#if !defined(CONFIG_MPC834x) && !defined(CONFIG_MPC8360) +#if !defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_ARCH_MPC8360) #define BR_MS_FCM 0x00000020 /* FCM */ #endif -#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8360) #define BR_MS_SDRAM 0x00000060 /* SDRAM */ #elif defined(CONFIG_MPC85xx) #define BR_MS_SDRAM 0x00000000 /* SDRAM */ @@ -54,7 +54,7 @@ void lbc_sdram_init(void); #define BR_MS_UPMA 0x00000080 /* UPMA */ #define BR_MS_UPMB 0x000000A0 /* UPMB */ #define BR_MS_UPMC 0x000000C0 /* UPMC */ -#if !defined(CONFIG_MPC834x) +#if !defined(CONFIG_ARCH_MPC834X) #define BR_ATOM 0x0000000C #define BR_ATOM_SHIFT 2 #endif @@ -67,7 +67,7 @@ void lbc_sdram_init(void); #define UPMB 1 #define UPMC 2 -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V) #else #define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V) @@ -133,7 +133,7 @@ void lbc_sdram_init(void); #define OR_GPCM_EHTR_SHIFT 1 #define OR_GPCM_EHTR_CLEAR 0x00000000 #define OR_GPCM_EHTR_SET 0x00000002 -#if !defined(CONFIG_MPC8308) +#if !defined(CONFIG_ARCH_MPC8308) #define OR_GPCM_EAD 0x00000001 #define OR_GPCM_EAD_SHIFT 0 #endif @@ -428,14 +428,17 @@ void lbc_sdram_init(void); #define LSDMR_BSMA1516 (3 << (31 - 10)) #define LSDMR_BSMA1617 (4 << (31 - 10)) #define LSDMR_RFCR5 (3 << (31 - 16)) +#define LSDMR_RFCR8 (5 << (31 - 16)) #define LSDMR_RFCR16 (7 << (31 - 16)) #define LSDMR_PRETOACT3 (3 << (31 - 19)) +#define LSDMR_PRETOACT6 (5 << (31 - 19)) #define LSDMR_PRETOACT7 (7 << (31 - 19)) #define LSDMR_ACTTORW3 (3 << (31 - 22)) #define LSDMR_ACTTORW7 (7 << (31 - 22)) #define LSDMR_ACTTORW6 (6 << (31 - 22)) #define LSDMR_BL8 (1 << (31 - 23)) #define LSDMR_WRC2 (2 << (31 - 27)) +#define LSDMR_WRC3 (3 << (31 - 27)) #define LSDMR_WRC4 (0 << (31 - 27)) #define LSDMR_BUFCMD (1 << (31 - 29)) #define LSDMR_CL3 (3 << (31 - 31)) diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index d00cee95fb..b6e4dd6c80 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -35,35 +35,35 @@ struct arch_global_data { #else /* There are other clocks in the MPC83XX */ u32 csb_clk; -# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) +# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; -# elif defined(CONFIG_MPC8309) +# elif defined(CONFIG_ARCH_MPC8309) u32 usbdr_clk; # endif -# if defined(CONFIG_MPC834x) +# if defined(CONFIG_ARCH_MPC834X) u32 usbmph_clk; -# endif /* CONFIG_MPC834x */ -# if defined(CONFIG_MPC8315) +# endif /* CONFIG_ARCH_MPC834X */ +# if defined(CONFIG_ARCH_MPC8315) u32 tdm_clk; # endif u32 core_clk; u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; -# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) u32 pciexp1_clk; u32 pciexp2_clk; # endif -# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315) +# if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315) u32 sata_clk; # endif -# if defined(CONFIG_MPC8360) +# if defined(CONFIG_ARCH_MPC8360) u32 mem_sec_clk; -# endif /* CONFIG_MPC8360 */ +# endif /* CONFIG_ARCH_MPC8360 */ #endif #endif #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index afef36f262..d02da6495c 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -59,12 +59,12 @@ typedef struct sysconf83xx { u32 obir; /* Output Buffer Impedance Register */ u8 res8[0xC]; u32 pecr1; /* PCI Express control register 1 */ -#if defined(CONFIG_MPC830x) +#if defined(CONFIG_ARCH_MPC830X) u32 sdhccr; /* eSDHC Control Registers for MPC830x */ #else u32 pecr2; /* PCI Express control register 2 */ #endif -#if defined(CONFIG_MPC8309) +#if defined(CONFIG_ARCH_MPC8309) u32 can_dbg_ctrl; u32 res9a; u32 gpr1; @@ -604,7 +604,7 @@ typedef struct serdes83xx { * On Chip ROM */ typedef struct rom83xx { -#if defined(CONFIG_MPC8309) +#if defined(CONFIG_ARCH_MPC8309) u8 mem[0x8000]; #else u8 mem[0x10000]; @@ -625,7 +625,7 @@ typedef struct tdmdmac83xx { u8 fixme[0x2000]; } tdmdmac83xx_t; -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -666,7 +666,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#ifndef CONFIG_MPC834x +#ifndef CONFIG_ARCH_MPC834X #ifdef CONFIG_HAS_FSL_MPH_USB #define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 /* use the MPH controller */ #define CONFIG_SYS_MPC83xx_USB2_OFFSET 0 @@ -679,7 +679,7 @@ typedef struct immap { #define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 #endif -#elif defined(CONFIG_MPC8313) +#elif defined(CONFIG_ARCH_MPC8313) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -714,7 +714,7 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) +#elif defined(CONFIG_ARCH_MPC8315) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -729,8 +729,8 @@ typedef struct immap { gpio83xx_t gpio[1]; /* General purpose I/O module */ u8 res0[0x1300]; ddr83xx_t ddr; /* DDR Memory Controller Memory */ - fsl_i2c_t i2c[2]; /* I2C Controllers */ - u8 res1[0x1300]; + fsl_i2c_t i2c[1]; /* I2C Controllers */ + u8 res1[0x1400]; duart83xx_t duart[2]; /* DUART */ u8 res2[0x900]; fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ @@ -759,7 +759,43 @@ typedef struct immap { u8 res12[0x1CF00]; } immap_t; -#elif defined(CONFIG_MPC837x) +#elif defined(CONFIG_ARCH_MPC8308) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[1]; /* Global Timers Module */ + u8 res0[0x100]; + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[1]; /* General purpose I/O module */ + u8 res1[0x1300]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res2[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res3[0x900]; + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ + u8 res4[0x1000]; + spi8xxx_t spi; /* Serial Peripheral Interface */ + u8 res5[0x1000]; + pex83xx_t pciexp[1]; /* PCI Express Controller */ + u8 res6[0x19000]; + usb83xx_t usb[1]; /* USB DR Controller */ + tsec83xx_t tsec[2]; + u8 res7[0x6000]; + tdmdmac83xx_t tdmdmac; /* TDM DMAC */ + sdhc83xx_t sdhc; /* SDHC Controller */ + u8 res8[0xb4000]; + serdes83xx_t serdes[1]; /* SerDes Registers */ + u8 res9[0x1CF00]; +} immap_t; + +#elif defined(CONFIG_ARCH_MPC837X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -803,7 +839,7 @@ typedef struct immap { rom83xx_t rom; /* On Chip ROM */ } immap_t; -#elif defined(CONFIG_MPC8360) +#elif defined(CONFIG_ARCH_MPC8360) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -843,7 +879,7 @@ typedef struct immap { u8 qe[0x100000]; /* QE block */ } immap_t; -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_ARCH_MPC832X) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -879,7 +915,7 @@ typedef struct immap { u8 res8[0xC0000]; u8 qe[0x100000]; /* QE block */ } immap_t; -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ @@ -946,7 +982,7 @@ typedef struct immap { #endif #define CONFIG_SYS_MPC83xx_USB1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB1_OFFSET) -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define CONFIG_SYS_MPC83xx_USB2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB2_OFFSET) #endif diff --git a/arch/powerpc/include/asm/mpc8xxx_spi.h b/arch/powerpc/include/asm/mpc8xxx_spi.h index 432be05469..b583a3269d 100644 --- a/arch/powerpc/include/asm/mpc8xxx_spi.h +++ b/arch/powerpc/include/asm/mpc8xxx_spi.h @@ -10,11 +10,11 @@ #include <asm/types.h> -#if defined(CONFIG_MPC8308) || \ - defined(CONFIG_MPC8313) || \ - defined(CONFIG_MPC8315) || \ - defined(CONFIG_MPC834x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || \ + defined(CONFIG_ARCH_MPC8313) || \ + defined(CONFIG_ARCH_MPC8315) || \ + defined(CONFIG_ARCH_MPC834X) || \ + defined(CONFIG_ARCH_MPC837X) typedef struct spi8xxx { u8 res0[0x20]; /* 0x0-0x01f reserved */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index f97ce48cc2..e03ab21f59 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1203,127 +1203,7 @@ int fsl_qoriq_dsp_core_to_cluster(unsigned int core); #endif #endif - -/* what kind of prep workstation we are */ -extern int _prep_type; -/* - * This is used to identify the board type from a given PReP board - * vendor. Board revision is also made available. - */ -extern unsigned char ucSystemType; -extern unsigned char ucBoardRev; -extern unsigned char ucBoardRevMaj, ucBoardRevMin; - struct task_struct; -void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp); -void release_thread(struct task_struct *); - -/* - * Create a new kernel thread. - */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - -/* - * Bus types - */ -#define EISA_bus 0 -#define EISA_bus__is_a_macro /* for versions in ksyms.c */ -#define MCA_bus 0 -#define MCA_bus__is_a_macro /* for versions in ksyms.c */ - -/* Lazy FPU handling on uni-processor */ -extern struct task_struct *last_task_used_math; -extern struct task_struct *last_task_used_altivec; - -/* - * this is the minimum allowable io space due to the location - * of the io areas on prep (first one at 0x80000000) but - * as soon as I get around to remapping the io areas with the BATs - * to match the mac we can raise this. -- Cort - */ -#define TASK_SIZE (0x80000000UL) - -/* This decides where the kernel will search for a free chunk of vm - * space during mmap's. - */ -#define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3) - -typedef struct { - unsigned long seg; -} mm_segment_t; - -struct thread_struct { - unsigned long ksp; /* Kernel stack pointer */ - unsigned long wchan; /* Event task is sleeping on */ - struct pt_regs *regs; /* Pointer to saved register state */ - mm_segment_t fs; /* for get_fs() validation */ - void *pgdir; /* root of page-table tree */ - signed long last_syscall; - double fpr[32]; /* Complete floating point set */ - unsigned long fpscr_pad; /* fpr ... fpscr must be contiguous */ - unsigned long fpscr; /* Floating point status */ -#ifdef CONFIG_ALTIVEC - vector128 vr[32]; /* Complete AltiVec set */ - vector128 vscr; /* AltiVec status */ - unsigned long vrsave; -#endif /* CONFIG_ALTIVEC */ -}; - -#define INIT_SP (sizeof(init_stack) + (unsigned long) &init_stack) - -#define INIT_THREAD { \ - INIT_SP, /* ksp */ \ - 0, /* wchan */ \ - (struct pt_regs *)INIT_SP - 1, /* regs */ \ - KERNEL_DS, /*fs*/ \ - swapper_pg_dir, /* pgdir */ \ - 0, /* last_syscall */ \ - {0}, 0, 0 \ -} - -/* - * Note: the vm_start and vm_end fields here should *not* - * be in kernel space. (Could vm_end == vm_start perhaps?) - */ -#define INIT_MMAP { &init_mm, 0, 0x1000, NULL, \ - PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \ - 1, NULL, NULL } - -/* - * Return saved PC of a blocked thread. For now, this is the "user" PC - */ -static inline unsigned long thread_saved_pc(struct thread_struct *t) -{ - return (t->regs) ? t->regs->nip : 0; -} - -#define copy_segments(tsk, mm) do { } while (0) -#define release_segments(mm) do { } while (0) -#define forget_segments() do { } while (0) - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.regs->nip) -#define KSTK_ESP(tsk) ((tsk)->thread.regs->gpr[1]) - -/* - * NOTE! The task struct and the stack go together - */ -#define THREAD_SIZE (2*PAGE_SIZE) -#define alloc_task_struct() \ - ((struct task_struct *) __get_free_pages(GFP_KERNEL,1)) -#define free_task_struct(p) free_pages((unsigned long)(p),1) -#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count) - -/* in process.c - for early bootup debug -- Cort */ -int ll_printk(const char *, ...); -void ll_puts(const char *); - -#define init_task (init_task_union.task) -#define init_stack (init_task_union.stack) - -/* In misc.c */ -void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); #ifndef CONFIG_CPU_MPC83XX int prt_83xx_rsr(void); diff --git a/board/esd/vme8349/Kconfig b/board/esd/vme8349/Kconfig index b8d9432dcc..ef2af40f7e 100644 --- a/board/esd/vme8349/Kconfig +++ b/board/esd/vme8349/Kconfig @@ -10,3 +10,16 @@ config SYS_CONFIG_NAME default "vme8349" endif + +if TARGET_CADDY2 + +config SYS_BOARD + default "vme8349" + +config SYS_VENDOR + default "esd" + +config SYS_CONFIG_NAME + default "caddy2" + +endif diff --git a/board/esd/vme8349/vme8349.c b/board/esd/vme8349/vme8349.c index 45ad3a83ee..4c220fa8e1 100644 --- a/board/esd/vme8349/vme8349.c +++ b/board/esd/vme8349/vme8349.c @@ -38,7 +38,7 @@ int dram_init(void) return -ENXIO; /* DDR SDRAM - Main memory */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; msize = spd_sdram(); @@ -60,7 +60,7 @@ int dram_init(void) int checkboard(void) { -#ifdef VME_CADDY2 +#ifdef CONFIG_TARGET_CADDY2 puts("Board: esd VME-CADDY/2\n"); #else puts("Board: esd VME-CPU/8349\n"); @@ -69,7 +69,7 @@ int checkboard(void) return 0; } -#ifdef VME_CADDY2 +#ifdef CONFIG_TARGET_CADDY2 int board_eth_init(bd_t *bis) { return pci_eth_init(bis); @@ -102,7 +102,7 @@ int misc_init_r() * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2 * and VME-CADDY/2) have different SDRAM configurations. */ -#ifdef VME_CADDY2 +#ifdef CONFIG_TARGET_CADDY2 #define SMALL_RAM 0xff #define LARGE_RAM 0x00 #else @@ -165,7 +165,7 @@ static spd_eeprom_t default_spd_eeprom = { SPD_VAL(0x7e, 0x1d), /* 63 */ { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' }, SPD_VAL(0x00, 0x00), /* 72 */ -#ifdef VME_CADDY2 +#ifdef CONFIG_TARGET_CADDY2 { "vme-caddy/2 ram " } #else { "vme-cpu/2 ram " } diff --git a/board/freescale/common/pq-mds-pib.c b/board/freescale/common/pq-mds-pib.c index d152a7821f..ae66039857 100644 --- a/board/freescale/common/pq-mds-pib.c +++ b/board/freescale/common/pq-mds-pib.c @@ -36,7 +36,7 @@ int pib_init(void) i2c_write(0x26, 0x6, 1, &val8, 1); val8 = 0x34; i2c_write(0x26, 0x7, 1, &val8, 1); -#if defined(CONFIG_MPC832XEMDS) +#if defined(CONFIG_TARGET_MPC832XEMDS) val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */ #else val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */ @@ -55,7 +55,7 @@ int pib_init(void) eieio(); -#if defined(CONFIG_MPC832XEMDS) +#if defined(CONFIG_TARGET_MPC832XEMDS) printf("PCI 32bit bus on PMC2 &PMC3\n"); #else printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n"); @@ -76,7 +76,7 @@ int pib_init(void) eieio(); printf("QOC3 ATM card on PMC0\n"); -#elif defined(CONFIG_MPC832XEMDS) +#elif defined(CONFIG_TARGET_MPC832XEMDS) val8 = 0; i2c_write(0x26, 0x7, 1, &val8, 1); val8 = 0xf7; diff --git a/board/freescale/mpc8308rdb/sdram.c b/board/freescale/mpc8308rdb/sdram.c index e64b3107b5..317e63ea6a 100644 --- a/board/freescale/mpc8308rdb/sdram.c +++ b/board/freescale/mpc8308rdb/sdram.c @@ -33,7 +33,7 @@ static long fixed_sdram(void) u32 msize_log2 = __ilog2(msize); out_be32(&im->sysconf.ddrlaw[0].bar, - CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000); + CONFIG_SYS_SDRAM_BASE & 0xfffff000); out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); @@ -61,7 +61,7 @@ static long fixed_sdram(void) setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); sync(); - return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); + return get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); } int dram_init(void) diff --git a/board/freescale/mpc8313erdb/Kconfig b/board/freescale/mpc8313erdb/Kconfig index 145608feab..b6332a1368 100644 --- a/board/freescale/mpc8313erdb/Kconfig +++ b/board/freescale/mpc8313erdb/Kconfig @@ -1,4 +1,4 @@ -if TARGET_MPC8313ERDB +if TARGET_MPC8313ERDB_NOR config SYS_BOARD default "mpc8313erdb" @@ -7,6 +7,19 @@ config SYS_VENDOR default "freescale" config SYS_CONFIG_NAME - default "MPC8313ERDB" + default "MPC8313ERDB_NOR" + +endif + +if TARGET_MPC8313ERDB_NAND + +config SYS_BOARD + default "mpc8313erdb" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "MPC8313ERDB_NAND" endif diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 5e074e3d87..c8e30a0947 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -47,7 +47,7 @@ static long fixed_sdram(void) volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; @@ -57,12 +57,12 @@ static long fixed_sdram(void) */ __udelay(50000); -#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) #warning Chip select bounds is only configurable in 16MB increments #endif im->ddr.csbnds[0].csbnds = - ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_DDR_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & + ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & CSBNDS_EA); im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; @@ -109,8 +109,9 @@ int dram_init(void) msize = fixed_sdram(); /* Local Bus setup lbcr and mrtpr */ - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + lbc->lbcr = (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF); + /* LB refresh timer prescal, 266MHz/32 */ + lbc->mrtpr = 0x20000000; sync(); #ifndef CONFIG_SYS_8313ERDB_BROKEN_PMC diff --git a/board/freescale/mpc8315erdb/MAINTAINERS b/board/freescale/mpc8315erdb/MAINTAINERS index 5a67b40993..cdac1ac2ee 100644 --- a/board/freescale/mpc8315erdb/MAINTAINERS +++ b/board/freescale/mpc8315erdb/MAINTAINERS @@ -4,3 +4,4 @@ S: Orphan (since 2018-05) F: board/freescale/mpc8315erdb/ F: include/configs/MPC8315ERDB.h F: configs/MPC8315ERDB_defconfig +F: configs/MPC8315ERDB_NANDSPL_defconfig diff --git a/board/freescale/mpc8315erdb/sdram.c b/board/freescale/mpc8315erdb/sdram.c index b9f94c8332..2f0f29a0e5 100644 --- a/board/freescale/mpc8315erdb/sdram.c +++ b/board/freescale/mpc8315erdb/sdram.c @@ -44,7 +44,7 @@ static long fixed_sdram(void) u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 772688186b..2dc6d7f5f5 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -79,7 +79,7 @@ int dram_init(void) return -ENXIO; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; msize = fixed_sdram(); diff --git a/board/freescale/mpc832xemds/mpc832xemds.c b/board/freescale/mpc832xemds/mpc832xemds.c index 869538feb9..61b95c601e 100644 --- a/board/freescale/mpc832xemds/mpc832xemds.c +++ b/board/freescale/mpc832xemds/mpc832xemds.c @@ -98,7 +98,7 @@ int dram_init(void) return -ENXIO; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; msize = fixed_sdram(); diff --git a/board/freescale/mpc8349emds/Kconfig b/board/freescale/mpc8349emds/Kconfig index 51f0b34f39..d154118079 100644 --- a/board/freescale/mpc8349emds/Kconfig +++ b/board/freescale/mpc8349emds/Kconfig @@ -10,3 +10,16 @@ config SYS_CONFIG_NAME default "MPC8349EMDS" endif + +if TARGET_MPC8349EMDS_SDRAM + +config SYS_BOARD + default "mpc8349emds" + +config SYS_VENDOR + default "freescale" + +config SYS_CONFIG_NAME + default "MPC8349EMDS_SDRAM" + +endif diff --git a/board/freescale/mpc8349emds/MAINTAINERS b/board/freescale/mpc8349emds/MAINTAINERS index e6648d66a0..a8f26a9a31 100644 --- a/board/freescale/mpc8349emds/MAINTAINERS +++ b/board/freescale/mpc8349emds/MAINTAINERS @@ -4,3 +4,6 @@ S: Orphan (since 2018-05) F: board/freescale/mpc8349emds/ F: include/configs/MPC8349EMDS.h F: configs/MPC8349EMDS_defconfig +F: configs/MPC8349EMDS_SDRAM_defconfig +F: configs/MPC8349EMDS_PCI64_defconfig +F: configs/MPC8349EMDS_SLAVE_defconfig diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index d40ed3742e..913b5843e9 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -56,7 +56,7 @@ int dram_init(void) return -ENXIO; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) #ifndef CONFIG_SYS_FSL_DDR2 msize = spd_sdram() * 1024 * 1024; @@ -91,7 +91,7 @@ int fixed_sdram(void) u32 ddr_size = msize << 20; /* DDR size in bytes */ u32 ddr_size_log2 = __ilog2(ddr_size); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); #if (CONFIG_SYS_DDR_SIZE != 256) @@ -112,12 +112,12 @@ int fixed_sdram(void) im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; #else -#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) #warning Chip select bounds is only configurable in 16MB increments #endif im->ddr.csbnds[2].csbnds = - ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >> CSBNDS_EA_SHIFT) & CSBNDS_EA); im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; @@ -183,28 +183,36 @@ void sdram_init(void) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - + const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 | + LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 | + LSDMR_WRC3 | LSDMR_CL3; /* * Setup SDRAM Base and Option Registers, already done in cpu_init.c */ /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; - lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->lbcr = 0x00000000; + /* LB refresh timer prescal, 266MHz/32 */ + lbc->mrtpr = 0x20000000; + /* LB sdram refresh timer, about 6us */ + lbc->lsrt = 0x32000000; asm("sync"); /* * Configure the SDRAM controller Machine Mode Register. */ - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + /* 0x40636733; normal operation */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; + + /* 0x68636733; precharge all the banks */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + /* 0x48636733; auto refresh */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; asm("sync"); /*1 times*/ *sdram_addr = 0xff; @@ -232,12 +240,13 @@ void sdram_init(void) udelay(100); /* 0x58636733; mode register write operation */ - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; + lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ + /* 0x40636733; normal operation */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; asm("sync"); *sdram_addr = 0xff; udelay(100); diff --git a/board/freescale/mpc8349emds/pci.c b/board/freescale/mpc8349emds/pci.c index a2feda855f..005190ed87 100644 --- a/board/freescale/mpc8349emds/pci.c +++ b/board/freescale/mpc8349emds/pci.c @@ -77,11 +77,11 @@ void pib_init(void) i2c_write(0x26, 0x6, 1, &val8, 1); val8 = 0x34; i2c_write(0x26, 0x7, 1, &val8, 1); -#if defined(PCI_64BIT) +#if defined(CONFIG_PCI_64BIT) val8 = 0xf4; /* PMC2:PCI1/64-bit */ -#elif defined(PCI_ALL_PCI1) +#elif defined(CONFIG_PCI_ALL_PCI1) val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ -#elif defined(PCI_ONE_PCI1) +#elif defined(CONFIG_PCI_ONE_PCI1) val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ #else val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ @@ -98,11 +98,11 @@ void pib_init(void) i2c_write(0x27, 0x3, 1, &val8, 1); asm("eieio"); -#if defined(PCI_64BIT) +#if defined(CONFIG_PCI_64BIT) printf("PCI1: 64-bit on PMC2\n"); -#elif defined(PCI_ALL_PCI1) +#elif defined(CONFIG_PCI_ALL_PCI1) printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); -#elif defined(PCI_ONE_PCI1) +#elif defined(CONFIG_PCI_ONE_PCI1) printf("PCI1: 32-bit on PMC1\n"); printf("PCI2: 32-bit on PMC2, PMC3\n"); #else diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 3bdec1c400..81b3f00b56 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -19,6 +19,9 @@ #include <linux/libfdt.h> #endif +#include "../../../arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h" +#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h" + DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_SPD_EEPROM @@ -34,14 +37,14 @@ int fixed_sdram(void) im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; -#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) #warning Chip select bounds is only configurable in 16MB increments #endif im->ddr.csbnds[0].csbnds = - ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >> CSBNDS_EA_SHIFT) & CSBNDS_EA); im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; @@ -129,7 +132,7 @@ int dram_init(void) return -ENXIO; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; #ifdef CONFIG_SPD_EEPROM msize = spd_sdram(); #else @@ -152,7 +155,7 @@ int dram_init(void) int checkboard(void) { -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX puts("Board: Freescale MPC8349E-mITX\n"); #else puts("Board: Freescale MPC8349E-mITX-GP\n"); diff --git a/board/freescale/mpc837xemds/MAINTAINERS b/board/freescale/mpc837xemds/MAINTAINERS index 8386aa7297..ce9c446f2d 100644 --- a/board/freescale/mpc837xemds/MAINTAINERS +++ b/board/freescale/mpc837xemds/MAINTAINERS @@ -4,4 +4,5 @@ S: Orphan (since 2018-05) F: board/freescale/mpc837xemds/ F: include/configs/MPC837XEMDS.h F: configs/MPC837XEMDS_defconfig +F: configs/MPC837XEMDS_SLAVE_defconfig F: configs/MPC837XEMDS_HOST_defconfig diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 09a046dff8..16922087c0 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -252,7 +252,7 @@ int fixed_sdram(void) u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); #if (CONFIG_SYS_DDR_SIZE != 512) diff --git a/board/freescale/mpc837xerdb/MAINTAINERS b/board/freescale/mpc837xerdb/MAINTAINERS index 81b4eed5ed..9f44a37a0d 100644 --- a/board/freescale/mpc837xerdb/MAINTAINERS +++ b/board/freescale/mpc837xerdb/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/freescale/mpc837xerdb/ F: include/configs/MPC837XERDB.h F: configs/MPC837XERDB_defconfig +F: configs/MPC837XERDB_SLAVE_defconfig diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index d9a47b90b2..18f396aac8 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -95,7 +95,7 @@ int fixed_sdram(void) u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; u32 msize_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index af9058a5d7..7dfe104561 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -5,16 +5,13 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o -obj-$(CONFIG_IO) += miiphybb.o -obj-$(CONFIG_IO64) += miiphybb.o -obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o -obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o -obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o -obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o -obj-$(CONFIG_STRIDER) += fanctrl.o +obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o +obj-$(CONFIG_TARGET_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o +obj-$(CONFIG_TARGET_STRIDER) += fanctrl.o obj-$(CONFIG_STRIDER_CON) += osd.o obj-$(CONFIG_STRIDER_CON_DP) += osd.o +obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o ifdef CONFIG_OSD obj-$(CONFIG_GDSYS_LEGACY_OSD_CMDS) += osd_cmd.o diff --git a/board/gdsys/common/adv7611.c b/board/gdsys/common/adv7611.c index c416bf1dc4..06cdc05825 100644 --- a/board/gdsys/common/adv7611.c +++ b/board/gdsys/common/adv7611.c @@ -4,6 +4,8 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <i2c.h> @@ -174,3 +176,5 @@ out: return res; } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/ch7301.c b/board/gdsys/common/ch7301.c index 1234149f42..5e42467651 100644 --- a/board/gdsys/common/ch7301.c +++ b/board/gdsys/common/ch7301.c @@ -6,6 +6,8 @@ /* Chrontel CH7301C DVI Transmitter */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <asm/io.h> #include <errno.h> @@ -61,3 +63,5 @@ int ch7301_probe(unsigned screen, bool power) return 0; } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/cmd_ioloop.c b/board/gdsys/common/cmd_ioloop.c index 8e2f4071ef..05a14ff103 100644 --- a/board/gdsys/common/cmd_ioloop.c +++ b/board/gdsys/common/cmd_ioloop.c @@ -10,34 +10,53 @@ #include <gdsys_fpga.h> +#ifndef CONFIG_GDSYS_LEGACY_DRIVERS +#include <dm.h> +#include <misc.h> +#include <regmap.h> +#include <board.h> + +#include "../../../drivers/misc/gdsys_soc.h" +#include "../../../drivers/misc/gdsys_ioep.h" +#include "../../../drivers/misc/ihs_fpga.h" + +const int HEADER_WORDS = sizeof(struct io_generic_packet) / 2; +#endif /* !CONFIG_GDSYS_LEGACY_DRIVERS */ + +enum status_print_type { + STATUS_LOUD = 0, + STATUS_SILENT = 1, +}; + +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS enum { - STATE_TX_PACKET_BUILDING = 1<<0, - STATE_TX_TRANSMITTING = 1<<1, - STATE_TX_BUFFER_FULL = 1<<2, - STATE_TX_ERR = 1<<3, - STATE_RECEIVE_TIMEOUT = 1<<4, - STATE_PROC_RX_STORE_TIMEOUT = 1<<5, - STATE_PROC_RX_RECEIVE_TIMEOUT = 1<<6, - STATE_RX_DIST_ERR = 1<<7, - STATE_RX_LENGTH_ERR = 1<<8, - STATE_RX_FRAME_CTR_ERR = 1<<9, - STATE_RX_FCS_ERR = 1<<10, - STATE_RX_PACKET_DROPPED = 1<<11, - STATE_RX_DATA_LAST = 1<<12, - STATE_RX_DATA_FIRST = 1<<13, - STATE_RX_DATA_AVAILABLE = 1<<15, + STATE_TX_PACKET_BUILDING = BIT(0), + STATE_TX_TRANSMITTING = BIT(1), + STATE_TX_BUFFER_FULL = BIT(2), + STATE_TX_ERR = BIT(3), + STATE_RECEIVE_TIMEOUT = BIT(4), + STATE_PROC_RX_STORE_TIMEOUT = BIT(5), + STATE_PROC_RX_RECEIVE_TIMEOUT = BIT(6), + STATE_RX_DIST_ERR = BIT(7), + STATE_RX_LENGTH_ERR = BIT(8), + STATE_RX_FRAME_CTR_ERR = BIT(9), + STATE_RX_FCS_ERR = BIT(10), + STATE_RX_PACKET_DROPPED = BIT(11), + STATE_RX_DATA_LAST = BIT(12), + STATE_RX_DATA_FIRST = BIT(13), + STATE_RX_DATA_AVAILABLE = BIT(15), }; enum { - CTRL_PROC_RECEIVE_ENABLE = 1<<12, - CTRL_FLUSH_TRANSMIT_BUFFER = 1<<15, + IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = BIT(5), + IRQ_CPU_PACKET_TRANSMITTED_EVENT = BIT(6), + IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = BIT(7), + IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = BIT(8), }; enum { - IRQ_CPU_TRANSMITBUFFER_FREE_STATUS = 1<<5, - IRQ_CPU_PACKET_TRANSMITTED_EVENT = 1<<6, - IRQ_NEW_CPU_PACKET_RECEIVED_EVENT = 1<<7, - IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS = 1<<8, + CTRL_PROC_RECEIVE_ENABLE = BIT(12), + CTRL_FLUSH_TRANSMIT_BUFFER = BIT(15), }; struct io_generic_packet { @@ -47,12 +66,17 @@ struct io_generic_packet { u8 bc; u16 packet_length; } __attribute__((__packed__)); +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ unsigned long long rx_ctr; unsigned long long tx_ctr; unsigned long long err_ctr; +#ifndef CONFIG_GDSYS_LEGACY_DRIVERS +struct udevice *dev; +#endif /* !CONFIG_GDSYS_LEGACY_DRIVERS */ -static void io_check_status(unsigned int fpga, u16 status, bool silent) +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS +static void io_check_status(uint fpga, u16 status, enum status_print_type type) { u16 mask = STATE_RX_DIST_ERR | STATE_RX_LENGTH_ERR | STATE_RX_FRAME_CTR_ERR | STATE_RX_FCS_ERR | @@ -66,7 +90,37 @@ static void io_check_status(unsigned int fpga, u16 status, bool silent) err_ctr++; FPGA_SET_REG(fpga, ep.rx_tx_status, status); - if (silent) + if (type == STATUS_SILENT) + return; + + if (status & STATE_RX_PACKET_DROPPED) + printf("RX_PACKET_DROPPED, status %04x\n", status); + + if (status & STATE_RX_DIST_ERR) + printf("RX_DIST_ERR\n"); + if (status & STATE_RX_LENGTH_ERR) + printf("RX_LENGTH_ERR\n"); + if (status & STATE_RX_FRAME_CTR_ERR) + printf("RX_FRAME_CTR_ERR\n"); + if (status & STATE_RX_FCS_ERR) + printf("RX_FCS_ERR\n"); + + if (status & STATE_TX_ERR) + printf("TX_ERR\n"); +} +#else +static void io_check_status(struct udevice *dev, enum status_print_type type) +{ + u16 status = 0; + int ret; + + ret = misc_call(dev, 0, NULL, 0, &status, 0); + if (!ret) + return; + + err_ctr++; + + if (type != STATUS_LOUD) return; if (status & STATE_RX_PACKET_DROPPED) @@ -84,10 +138,12 @@ static void io_check_status(unsigned int fpga, u16 status, bool silent) if (status & STATE_TX_ERR) printf("TX_ERR\n"); } +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ -static void io_send(unsigned int fpga, unsigned int size) +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS +static void io_send(uint fpga, uint size) { - unsigned int k; + uint k; struct io_generic_packet packet = { .source_address = 1, .packet_type = 1, @@ -106,10 +162,31 @@ static void io_send(unsigned int fpga, unsigned int size) tx_ctr++; } +#else +static void io_send(struct udevice *dev, uint size) +{ + uint k; + u16 buffer[HEADER_WORDS + 128]; + struct io_generic_packet header = { + .source_address = 1, + .packet_type = 1, + .packet_length = size, + }; + const uint words = (size + 1) / 2; + + memcpy(buffer, &header, 2 * HEADER_WORDS); + for (k = 0; k < words; ++k) + buffer[k + HEADER_WORDS] = (2 * k + 1) + ((2 * k) << 8); + + misc_write(dev, 0, buffer, HEADER_WORDS + words); + + tx_ctr++; +} +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ -static void io_receive(unsigned int fpga) +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS +static void io_receive(uint fpga) { - unsigned int k = 0; u16 rx_tx_status; FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); @@ -123,17 +200,25 @@ static void io_receive(unsigned int fpga) FPGA_GET_REG(fpga, ep.receive_data, &rx); FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); - - ++k; } } +#else +static void io_receive(struct udevice *dev) +{ + u16 buffer[HEADER_WORDS + 128]; -static void io_reflect(unsigned int fpga) + if (!misc_read(dev, 0, buffer, 0)) + rx_ctr++; +} +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ + +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS +static void io_reflect(uint fpga) { u16 buffer[128]; - unsigned int k = 0; - unsigned int n; + uint k = 0; + uint n; u16 rx_tx_status; FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); @@ -157,7 +242,22 @@ static void io_reflect(unsigned int fpga) tx_ctr++; } +#else +static void io_reflect(struct udevice *dev) +{ + u16 buffer[HEADER_WORDS + 128]; + struct io_generic_packet *header; + if (misc_read(dev, 0, buffer, 0)) + return; + + header = (struct io_generic_packet *)&buffer; + + misc_write(dev, 0, buffer, HEADER_WORDS + header->packet_length); +} +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ + +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS /* * FPGA io-endpoint reflector * @@ -166,8 +266,8 @@ static void io_reflect(unsigned int fpga) */ int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - unsigned int fpga; - unsigned int rate = 0; + uint fpga; + uint rate = 0; unsigned long long last_seen = 0; if (argc < 2) @@ -181,10 +281,10 @@ int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (argc > 2) rate = simple_strtoul(argv[2], NULL, 10); - /* enable receive path */ + /* Enable receive path */ FPGA_SET_REG(fpga, ep.rx_tx_control, CTRL_PROC_RECEIVE_ENABLE); - /* set device address to dummy 1*/ + /* Set device address to dummy 1*/ FPGA_SET_REG(fpga, ep.device_address, 1); rx_ctr = 0; tx_ctr = 0; err_ctr = 0; @@ -196,7 +296,7 @@ int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) FPGA_GET_REG(fpga, top_interrupt, &top_int); FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); - io_check_status(fpga, rx_tx_status, true); + io_check_status(fpga, rx_tx_status, STATUS_SILENT); if ((top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) && (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS)) io_reflect(fpga); @@ -214,19 +314,71 @@ int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#else +/* + * FPGA io-endpoint reflector + * + * Syntax: + * ioreflect {reportrate} + */ +int do_ioreflect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *fpga; + struct regmap *map; + uint rate = 0; + unsigned long long last_seen = 0; + if (!dev) { + printf("No device selected\n"); + return 1; + } + + gdsys_soc_get_fpga(dev, &fpga); + regmap_init_mem(dev_ofnode(dev), &map); + + /* Enable receive path */ + misc_set_enabled(dev, true); + + rx_ctr = 0; tx_ctr = 0; err_ctr = 0; + + while (1) { + uint top_int; + + ihs_fpga_get(map, top_interrupt, &top_int); + io_check_status(dev, STATUS_SILENT); + if ((top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) && + (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS)) + io_reflect(dev); + + if (rate) { + if (!(tx_ctr % rate) && (tx_ctr != last_seen)) + printf("refl %llu, err %llu\n", tx_ctr, + err_ctr); + last_seen = tx_ctr; + } + + if (ctrlc()) + break; + } + + return 0; +} +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ + +#define DISP_LINE_LEN 16 + +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS /* * FPGA io-endpoint looptest * * Syntax: * ioloop {fpga} {size} {rate} */ -#define DISP_LINE_LEN 16 int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - unsigned int fpga; - unsigned int size; - unsigned int rate = 0; + uint fpga; + uint size; + uint rate = 0; if (argc < 3) return CMD_RET_USAGE; @@ -262,7 +414,7 @@ int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) FPGA_GET_REG(fpga, top_interrupt, &top_int); FPGA_GET_REG(fpga, ep.rx_tx_status, &rx_tx_status); - io_check_status(fpga, rx_tx_status, false); + io_check_status(fpga, rx_tx_status, STATUS_LOUD); if (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS) io_send(fpga, size); if (top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) @@ -273,15 +425,130 @@ int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) break; udelay(1000000 / rate); if (!(tx_ctr % rate)) - printf("d %lld, tx %llu, rx %llu, err %llu\n", + printf("d %llu, tx %llu, rx %llu, err %llu\n", + tx_ctr - rx_ctr, tx_ctr, rx_ctr, + err_ctr); + } + } + + return 0; +} +#else +/* + * FPGA io-endpoint looptest + * + * Syntax: + * ioloop {size} {rate} + */ +int do_ioloop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + uint size; + uint rate = 0; + struct udevice *fpga; + struct regmap *map; + + if (!dev) { + printf("No device selected\n"); + return 1; + } + + gdsys_soc_get_fpga(dev, &fpga); + regmap_init_mem(dev_ofnode(dev), &map); + + if (argc < 2) + return CMD_RET_USAGE; + + /* + * packet size is specified since argc > 1 + */ + size = simple_strtoul(argv[2], NULL, 10); + + /* + * If another parameter, it is the test rate in packets per second. + */ + if (argc > 2) + rate = simple_strtoul(argv[3], NULL, 10); + + /* Enable receive path */ + misc_set_enabled(dev, true); + + rx_ctr = 0; tx_ctr = 0; err_ctr = 0; + + while (1) { + uint top_int; + + if (ctrlc()) + break; + + ihs_fpga_get(map, top_interrupt, &top_int); + + io_check_status(dev, STATUS_LOUD); + if (top_int & IRQ_CPU_TRANSMITBUFFER_FREE_STATUS) + io_send(dev, size); + if (top_int & IRQ_CPU_RECEIVE_DATA_AVAILABLE_STATUS) + io_receive(dev); + + if (rate) { + udelay(1000000 / rate); + if (!(tx_ctr % rate)) + printf("d %llu, tx %llu, rx %llu, err %llu\n", tx_ctr - rx_ctr, tx_ctr, rx_ctr, err_ctr); } } + return 0; +} +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ + +#ifndef CONFIG_GDSYS_LEGACY_DRIVERS +int do_iodev(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct udevice *ioep = NULL; + struct udevice *board; + char name[8]; + int ret; + + if (board_get(&board)) + return CMD_RET_FAILURE; + + if (argc > 1) { + int i = simple_strtoul(argv[1], NULL, 10); + + snprintf(name, sizeof(name), "ioep%d", i); + + ret = uclass_get_device_by_phandle(UCLASS_MISC, board, name, &ioep); + + if (ret || !ioep) { + printf("Invalid IOEP %d\n", i); + return CMD_RET_FAILURE; + } + + dev = ioep; + } else { + int i = 0; + + while (1) { + snprintf(name, sizeof(name), "ioep%d", i); + + ret = uclass_get_device_by_phandle(UCLASS_MISC, board, name, &ioep); + + if (ret || !ioep) + break; + + printf("IOEP %d:\t%s\n", i++, ioep->name); + } + + if (dev) + printf("\nSelected IOEP: %s\n", dev->name); + else + puts("\nNo IOEP selected.\n"); + } return 0; } +#endif /* !CONFIG_GDSYS_LEGACY_DRIVERS */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS U_BOOT_CMD( ioloop, 4, 0, do_ioloop, "fpga io-endpoint looptest", @@ -293,3 +560,22 @@ U_BOOT_CMD( "fpga io-endpoint reflector", "fpga reportrate" ); +#else +U_BOOT_CMD( + ioloop, 3, 0, do_ioloop, + "fpga io-endpoint looptest", + "packetsize [packets/sec]" +); + +U_BOOT_CMD( + ioreflect, 2, 0, do_ioreflect, + "fpga io-endpoint reflector", + "reportrate" +); + +U_BOOT_CMD( + iodev, 2, 0, do_iodev, + "fpga io-endpoint listing/selection", + "[ioep device to select]" +); +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index 69d4b8c333..9ca69ebcbb 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -6,6 +6,8 @@ /* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <asm/io.h> #include <errno.h> @@ -155,3 +157,5 @@ int dp501_probe(unsigned screen, bool power) return 0; } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/fanctrl.c b/board/gdsys/common/fanctrl.c index 5e776831db..27c875cbec 100644 --- a/board/gdsys/common/fanctrl.c +++ b/board/gdsys/common/fanctrl.c @@ -4,6 +4,8 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <i2c.h> @@ -29,3 +31,5 @@ void init_fan_controller(u8 addr) val = i2c_reg_read(addr, FAN_CONFIG) | 0x04; i2c_reg_write(addr, FAN_CONFIG, val); } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/fpga.c b/board/gdsys/common/fpga.c index f189e5fbd1..5ba6613ed5 100644 --- a/board/gdsys/common/fpga.c +++ b/board/gdsys/common/fpga.c @@ -4,6 +4,8 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <gdsys_fpga.h> @@ -22,3 +24,5 @@ int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) return 0; } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/ihs_mdio.c b/board/gdsys/common/ihs_mdio.c index b17e8db91b..f160a57cc2 100644 --- a/board/gdsys/common/ihs_mdio.c +++ b/board/gdsys/common/ihs_mdio.c @@ -11,6 +11,7 @@ #include <gdsys_fpga.h> #else #include <fdtdec.h> +#include <dm.h> #include <regmap.h> #endif @@ -28,7 +29,7 @@ static inline u16 read_reg(struct udevice *fpga, uint base, uint addr) struct regmap *map; u8 *ptr; - regmap_init_mem(fpga, &map); + regmap_init_mem(dev_ofnode(fpga), &map); ptr = regmap_get_range(map, 0); return in_le16((u16 *)(ptr + base + addr)); @@ -40,7 +41,7 @@ static inline void write_reg(struct udevice *fpga, uint base, uint addr, struct regmap *map; u8 *ptr; - regmap_init_mem(fpga, &map); + regmap_init_mem(dev_ofnode(fpga), &map); ptr = regmap_get_range(map, 0); out_le16((u16 *)(ptr + base + addr), val); diff --git a/board/gdsys/common/ioep-fpga.c b/board/gdsys/common/ioep-fpga.c index 8e10501247..066222c563 100644 --- a/board/gdsys/common/ioep-fpga.c +++ b/board/gdsys/common/ioep-fpga.c @@ -4,233 +4,586 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <gdsys_fpga.h> -enum { - UNITTYPE_MAIN_SERVER = 0, - UNITTYPE_MAIN_USER = 1, - UNITTYPE_VIDEO_SERVER = 2, - UNITTYPE_VIDEO_USER = 3, +enum pcb_video_type { + PCB_DVI_SL, + PCB_DP_165MPIX, + PCB_DP_300MPIX, + PCB_HDMI, + PCB_DP_1_2, + PCB_HDMI_2_0, }; -enum { - UNITTYPEPCB_DVI = 0, - UNITTYPEPCB_DP_165 = 1, - UNITTYPEPCB_DP_300 = 2, - UNITTYPEPCB_HDMI = 3, +enum pcb_transmission_type { + PCB_CAT_1G, + PCB_FIBER_3G, + PCB_CAT_10G, + PCB_FIBER_10G, }; -enum { - COMPRESSION_NONE = 0, - COMPRESSION_TYPE_1 = 1, - COMPRESSION_TYPE_1_2 = 3, - COMPRESSION_TYPE_1_2_3 = 7, +enum carrier_speed { + CARRIER_SPEED_1G, + CARRIER_SPEED_3G, + CARRIER_SPEED_2_5G = CARRIER_SPEED_3G, + CARRIER_SPEED_10G, }; -enum { - AUDIO_NONE = 0, - AUDIO_TX = 1, - AUDIO_RX = 2, - AUDIO_RXTX = 3, +enum ram_config { + RAM_DDR2_32BIT_295MBPS, + RAM_DDR3_32BIT_590MBPS, + RAM_DDR3_48BIT_590MBPS, + RAM_DDR3_64BIT_1800MBPS, + RAM_DDR3_48BIT_1800MBPS, }; -enum { - SYSCLK_147456 = 0, +enum sysclock { + SYSCLK_147456, }; -enum { - RAM_DDR2_32 = 0, - RAM_DDR3_32 = 1, - RAM_DDR3_48 = 2, +struct fpga_versions { + bool video_channel; + bool con_side; + enum pcb_video_type pcb_video_type; + enum pcb_transmission_type pcb_transmission_type; + unsigned int hw_version; }; -enum { - CARRIER_SPEED_1G = 0, - CARRIER_SPEED_2_5G = 1, +struct fpga_features { + u8 video_channels; + u8 carriers; + enum carrier_speed carrier_speed; + enum ram_config ram_config; + enum sysclock sysclock; + + bool pcm_tx; + bool pcm_rx; + bool spdif_tx; + bool spdif_rx; + bool usb2; + bool rs232; + bool compression_type1; + bool compression_type2; + bool compression_type3; + bool interlace; + bool osd; + bool compression_pipes; }; -bool ioep_fpga_has_osd(unsigned int fpga) +#ifdef CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM + +static int get_versions(unsigned int fpga, struct fpga_versions *versions) { - u16 fpga_features; - unsigned feature_osd; + enum { + VERSIONS_FPGA_VIDEO_CHANNEL = BIT(12), + VERSIONS_FPGA_CON_SIDE = BIT(13), + VERSIONS_FPGA_SC = BIT(14), + VERSIONS_PCB_CON = BIT(9), + VERSIONS_PCB_SC = BIT(8), + VERSIONS_PCB_VIDEO_MASK = 0x3 << 6, + VERSIONS_PCB_VIDEO_DP_1_2 = 0x0 << 6, + VERSIONS_PCB_VIDEO_HDMI_2_0 = 0x1 << 6, + VERSIONS_PCB_TRANSMISSION_MASK = 0x3 << 4, + VERSIONS_PCB_TRANSMISSION_FIBER_10G = 0x0 << 4, + VERSIONS_PCB_TRANSMISSION_CAT_10G = 0x1 << 4, + VERSIONS_PCB_TRANSMISSION_FIBER_3G = 0x2 << 4, + VERSIONS_PCB_TRANSMISSION_CAT_1G = 0x3 << 4, + VERSIONS_HW_VER_MASK = 0xf << 0, + }; + u16 raw_versions; + + memset(versions, 0, sizeof(struct fpga_versions)); + + FPGA_GET_REG(fpga, versions, &raw_versions); + + versions->video_channel = raw_versions & VERSIONS_FPGA_VIDEO_CHANNEL; + versions->con_side = raw_versions & VERSIONS_FPGA_CON_SIDE; + + switch (raw_versions & VERSIONS_PCB_VIDEO_MASK) { + case VERSIONS_PCB_VIDEO_DP_1_2: + versions->pcb_video_type = PCB_DP_1_2; + break; + + case VERSIONS_PCB_VIDEO_HDMI_2_0: + versions->pcb_video_type = PCB_HDMI_2_0; + break; + } + + switch (raw_versions & VERSIONS_PCB_TRANSMISSION_MASK) { + case VERSIONS_PCB_TRANSMISSION_FIBER_10G: + versions->pcb_transmission_type = PCB_FIBER_10G; + break; + + case VERSIONS_PCB_TRANSMISSION_CAT_10G: + versions->pcb_transmission_type = PCB_CAT_10G; + break; + + case VERSIONS_PCB_TRANSMISSION_FIBER_3G: + versions->pcb_transmission_type = PCB_FIBER_3G; + break; + + case VERSIONS_PCB_TRANSMISSION_CAT_1G: + versions->pcb_transmission_type = PCB_CAT_1G; + break; - FPGA_GET_REG(0, fpga_features, &fpga_features); - feature_osd = fpga_features & (1<<11); + } - return feature_osd; + versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK; + + return 0; } -void ioep_fpga_print_info(unsigned int fpga) +static int get_features(unsigned int fpga, struct fpga_features *features) { - u16 versions; - u16 fpga_version; - u16 fpga_features; - unsigned unit_type; - unsigned unit_type_pcb_video; - unsigned feature_compression; - unsigned feature_osd; - unsigned feature_audio; - unsigned feature_sysclock; - unsigned feature_ramconfig; - unsigned feature_carrier_speed; - unsigned feature_carriers; - unsigned feature_video_channels; - - FPGA_GET_REG(fpga, versions, &versions); - FPGA_GET_REG(fpga, fpga_version, &fpga_version); - FPGA_GET_REG(fpga, fpga_features, &fpga_features); - - unit_type = (versions & 0xf000) >> 12; - unit_type_pcb_video = (versions & 0x01c0) >> 6; - feature_compression = (fpga_features & 0xe000) >> 13; - feature_osd = fpga_features & (1<<11); - feature_audio = (fpga_features & 0x0600) >> 9; - feature_sysclock = (fpga_features & 0x0180) >> 7; - feature_ramconfig = (fpga_features & 0x0060) >> 5; - feature_carrier_speed = fpga_features & (1<<4); - feature_carriers = (fpga_features & 0x000c) >> 2; - feature_video_channels = fpga_features & 0x0003; - - switch (unit_type) { - case UNITTYPE_MAIN_SERVER: - case UNITTYPE_MAIN_USER: - printf("Mainchannel"); + enum { + FEATURE_SPDIF_RX = BIT(15), + FEATURE_SPDIF_TX = BIT(14), + FEATURE_PCM_RX = BIT(13), + FEATURE_PCM_TX = BIT(12), + FEATURE_RAM_MASK = GENMASK(11, 8), + FEATURE_RAM_DDR2_32BIT_295MBPS = 0x0 << 8, + FEATURE_RAM_DDR3_32BIT_590MBPS = 0x1 << 8, + FEATURE_RAM_DDR3_48BIT_590MBPS = 0x2 << 8, + FEATURE_RAM_DDR3_64BIT_1800MBPS = 0x3 << 8, + FEATURE_RAM_DDR3_48BIT_1800MBPS = 0x4 << 8, + FEATURE_CARRIER_SPEED_MASK = GENMASK(7, 6), + FEATURE_CARRIER_SPEED_1G = 0x0 << 6, + FEATURE_CARRIER_SPEED_2_5G = 0x1 << 6, + FEATURE_CARRIER_SPEED_10G = 0x2 << 6, + FEATURE_CARRIERS_MASK = GENMASK(5, 4), + FEATURE_CARRIERS_0 = 0x0 << 4, + FEATURE_CARRIERS_1 = 0x1 << 4, + FEATURE_CARRIERS_2 = 0x2 << 4, + FEATURE_CARRIERS_4 = 0x3 << 4, + FEATURE_USB2 = BIT(3), + FEATURE_VIDEOCHANNELS_MASK = GENMASK(2, 0), + FEATURE_VIDEOCHANNELS_0 = 0x0 << 0, + FEATURE_VIDEOCHANNELS_1 = 0x1 << 0, + FEATURE_VIDEOCHANNELS_1_1 = 0x2 << 0, + FEATURE_VIDEOCHANNELS_2 = 0x3 << 0, + }; + + enum { + EXT_FEATURE_OSD = BIT(15), + EXT_FEATURE_ETHERNET = BIT(9), + EXT_FEATURE_INTERLACE = BIT(8), + EXT_FEATURE_RS232 = BIT(7), + EXT_FEATURE_COMPRESSION_PERF_MASK = GENMASK(6, 4), + EXT_FEATURE_COMPRESSION_PERF_1X = 0x0 << 4, + EXT_FEATURE_COMPRESSION_PERF_2X = 0x1 << 4, + EXT_FEATURE_COMPRESSION_PERF_4X = 0x2 << 4, + EXT_FEATURE_COMPRESSION_TYPE1 = BIT(0), + EXT_FEATURE_COMPRESSION_TYPE2 = BIT(1), + EXT_FEATURE_COMPRESSION_TYPE3 = BIT(2), + }; + + u16 raw_features; + u16 raw_extended_features; + + memset(features, 0, sizeof(struct fpga_features)); + + FPGA_GET_REG(fpga, fpga_features, &raw_features); + FPGA_GET_REG(fpga, fpga_ext_features, &raw_extended_features); + + switch (raw_features & FEATURE_VIDEOCHANNELS_MASK) { + case FEATURE_VIDEOCHANNELS_0: + features->video_channels = 0; break; - case UNITTYPE_VIDEO_SERVER: - case UNITTYPE_VIDEO_USER: - printf("Videochannel"); + case FEATURE_VIDEOCHANNELS_1: + features->video_channels = 1; break; - default: - printf("UnitType %d(not supported)", unit_type); + case FEATURE_VIDEOCHANNELS_1_1: + case FEATURE_VIDEOCHANNELS_2: + features->video_channels = 2; break; - } + }; - switch (unit_type) { - case UNITTYPE_MAIN_SERVER: - case UNITTYPE_VIDEO_SERVER: - printf(" Server"); - if (versions & (1<<4)) - printf(" UC"); + switch (raw_features & FEATURE_CARRIERS_MASK) { + case FEATURE_CARRIERS_0: + features->carriers = 0; break; - case UNITTYPE_MAIN_USER: - case UNITTYPE_VIDEO_USER: - printf(" User"); + case FEATURE_CARRIERS_1: + features->carriers = 1; break; - default: + case FEATURE_CARRIERS_2: + features->carriers = 2; + break; + + case FEATURE_CARRIERS_4: + features->carriers = 4; break; } - if (versions & (1<<5)) - printf(" Fiber"); - else - printf(" CAT"); + switch (raw_features & FEATURE_CARRIER_SPEED_MASK) { + case FEATURE_CARRIER_SPEED_1G: + features->carrier_speed = CARRIER_SPEED_1G; + break; + case FEATURE_CARRIER_SPEED_2_5G: + features->carrier_speed = CARRIER_SPEED_2_5G; + break; + case FEATURE_CARRIER_SPEED_10G: + features->carrier_speed = CARRIER_SPEED_10G; + break; + } - switch (unit_type_pcb_video) { - case UNITTYPEPCB_DVI: - printf(" DVI,"); + switch (raw_features & FEATURE_RAM_MASK) { + case FEATURE_RAM_DDR2_32BIT_295MBPS: + features->ram_config = RAM_DDR2_32BIT_295MBPS; break; - case UNITTYPEPCB_DP_165: - printf(" DP 165MPix/s,"); + case FEATURE_RAM_DDR3_32BIT_590MBPS: + features->ram_config = RAM_DDR3_32BIT_590MBPS; break; - case UNITTYPEPCB_DP_300: - printf(" DP 300MPix/s,"); + case FEATURE_RAM_DDR3_48BIT_590MBPS: + features->ram_config = RAM_DDR3_48BIT_590MBPS; break; - case UNITTYPEPCB_HDMI: - printf(" HDMI,"); + case FEATURE_RAM_DDR3_64BIT_1800MBPS: + features->ram_config = RAM_DDR3_64BIT_1800MBPS; + break; + + case FEATURE_RAM_DDR3_48BIT_1800MBPS: + features->ram_config = RAM_DDR3_48BIT_1800MBPS; break; } - printf(" FPGA V %d.%02d\n features:", - fpga_version / 100, fpga_version % 100); + features->pcm_tx = raw_features & FEATURE_PCM_TX; + features->pcm_rx = raw_features & FEATURE_PCM_RX; + features->spdif_tx = raw_features & FEATURE_SPDIF_TX; + features->spdif_rx = raw_features & FEATURE_SPDIF_RX; + features->usb2 = raw_features & FEATURE_USB2; + features->rs232 = raw_extended_features & EXT_FEATURE_RS232; + features->compression_type1 = raw_extended_features & EXT_FEATURE_COMPRESSION_TYPE1; + features->compression_type2 = raw_extended_features & EXT_FEATURE_COMPRESSION_TYPE2; + features->compression_type3 = raw_extended_features & EXT_FEATURE_COMPRESSION_TYPE3; + features->interlace = raw_extended_features & EXT_FEATURE_INTERLACE; + features->osd = raw_extended_features & EXT_FEATURE_OSD; + features->compression_pipes = raw_extended_features & EXT_FEATURE_COMPRESSION_PERF_MASK; + + return 0; +} + +#else + +static int get_versions(unsigned int fpga, struct fpga_versions *versions) +{ + enum { + /* HW version encoding is a mess, leave it for the moment */ + VERSIONS_HW_VER_MASK = 0xf << 0, + VERSIONS_PIX_CLOCK_GEN_IDT8N3QV01 = BIT(4), + VERSIONS_SFP = BIT(5), + VERSIONS_VIDEO_MASK = 0x7 << 6, + VERSIONS_VIDEO_DVI = 0x0 << 6, + VERSIONS_VIDEO_DP_165 = 0x1 << 6, + VERSIONS_VIDEO_DP_300 = 0x2 << 6, + VERSIONS_VIDEO_HDMI = 0x3 << 6, + VERSIONS_UT_MASK = 0xf << 12, + VERSIONS_UT_MAIN_SERVER = 0x0 << 12, + VERSIONS_UT_MAIN_USER = 0x1 << 12, + VERSIONS_UT_VIDEO_SERVER = 0x2 << 12, + VERSIONS_UT_VIDEO_USER = 0x3 << 12, + }; + u16 raw_versions; + + memset(versions, 0, sizeof(struct fpga_versions)); + + FPGA_GET_REG(fpga, versions, &raw_versions); + + switch (raw_versions & VERSIONS_UT_MASK) { + case VERSIONS_UT_MAIN_SERVER: + versions->video_channel = false; + versions->con_side = false; + break; + + case VERSIONS_UT_MAIN_USER: + versions->video_channel = false; + versions->con_side = true; + break; + case VERSIONS_UT_VIDEO_SERVER: + versions->video_channel = true; + versions->con_side = false; + break; - switch (feature_compression) { - case COMPRESSION_NONE: - printf(" no compression"); + case VERSIONS_UT_VIDEO_USER: + versions->video_channel = true; + versions->con_side = true; break; - case COMPRESSION_TYPE_1: - printf(" compression type1(delta)"); + } + + switch (raw_versions & VERSIONS_VIDEO_MASK) { + case VERSIONS_VIDEO_DVI: + versions->pcb_video_type = PCB_DVI_SL; break; - case COMPRESSION_TYPE_1_2: - printf(" compression type1(delta), type2(inline)"); + case VERSIONS_VIDEO_DP_165: + versions->pcb_video_type = PCB_DP_165MPIX; break; - case COMPRESSION_TYPE_1_2_3: - printf(" compression type1(delta), type2(inline), type3(intempo)"); + case VERSIONS_VIDEO_DP_300: + versions->pcb_video_type = PCB_DP_300MPIX; break; - default: - printf(" compression %d(not supported)", feature_compression); + case VERSIONS_VIDEO_HDMI: + versions->pcb_video_type = PCB_HDMI; break; } - printf(", %sosd", feature_osd ? "" : "no "); + versions->hw_version = raw_versions & VERSIONS_HW_VER_MASK; - switch (feature_audio) { - case AUDIO_NONE: - printf(", no audio"); + if (raw_versions & VERSIONS_SFP) + versions->pcb_transmission_type = PCB_FIBER_3G; + else + versions->pcb_transmission_type = PCB_CAT_1G; + + return 0; +} + +static int get_features(unsigned int fpga, struct fpga_features *features) +{ + enum { + FEATURE_CARRIER_SPEED_2_5 = BIT(4), + FEATURE_RAM_MASK = 0x7 << 5, + FEATURE_RAM_DDR2_32BIT = 0x0 << 5, + FEATURE_RAM_DDR3_32BIT = 0x1 << 5, + FEATURE_RAM_DDR3_48BIT = 0x2 << 5, + FEATURE_PCM_AUDIO_TX = BIT(9), + FEATURE_PCM_AUDIO_RX = BIT(10), + FEATURE_OSD = BIT(11), + FEATURE_USB20 = BIT(12), + FEATURE_COMPRESSION_MASK = 7 << 13, + FEATURE_COMPRESSION_TYPE1 = 0x1 << 13, + FEATURE_COMPRESSION_TYPE1_TYPE2 = 0x3 << 13, + FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3 = 0x7 << 13, + }; + + enum { + EXTENDED_FEATURE_SPDIF_AUDIO_TX = BIT(0), + EXTENDED_FEATURE_SPDIF_AUDIO_RX = BIT(1), + EXTENDED_FEATURE_RS232 = BIT(2), + EXTENDED_FEATURE_COMPRESSION_PIPES = BIT(3), + EXTENDED_FEATURE_INTERLACE = BIT(4), + }; + + u16 raw_features; +#ifdef GDSYS_LEGACY_DRIVERS + u16 raw_extended_features; +#endif + + memset(features, 0, sizeof(struct fpga_features)); + + FPGA_GET_REG(fpga, fpga_features, &raw_features); +#ifdef GDSYS_LEGACY_DRIVERS + FPGA_GET_REG(fpga, fpga_ext_features, &raw_extended_features); +#endif + + features->video_channels = raw_features & 0x3; + features->carriers = (raw_features >> 2) & 0x3; + + features->carrier_speed = (raw_features & FEATURE_CARRIER_SPEED_2_5) + ? CARRIER_SPEED_2_5G : CARRIER_SPEED_1G; + + switch (raw_features & FEATURE_RAM_MASK) { + case FEATURE_RAM_DDR2_32BIT: + features->ram_config = RAM_DDR2_32BIT_295MBPS; break; - case AUDIO_TX: - printf(", audio tx"); + case FEATURE_RAM_DDR3_32BIT: + features->ram_config = RAM_DDR3_32BIT_590MBPS; break; - case AUDIO_RX: - printf(", audio rx"); + case FEATURE_RAM_DDR3_48BIT: + features->ram_config = RAM_DDR3_48BIT_590MBPS; break; + } - case AUDIO_RXTX: - printf(", audio rx+tx"); + features->pcm_tx = raw_features & FEATURE_PCM_AUDIO_TX; + features->pcm_rx = raw_features & FEATURE_PCM_AUDIO_RX; +#ifdef GDSYS_LEGACY_DRIVERS + features->spdif_tx = raw_extended_features & EXTENDED_FEATURE_SPDIF_AUDIO_TX; + features->spdif_rx = raw_extended_features & EXTENDED_FEATURE_SPDIF_AUDIO_RX; +#endif + + features->usb2 = raw_features & FEATURE_USB20; +#ifdef GDSYS_LEGACY_DRIVERS + features->rs232 = raw_extended_features & EXTENDED_FEATURE_RS232; +#endif + + features->compression_type1 = false; + features->compression_type2 = false; + features->compression_type3 = false; + switch (raw_features & FEATURE_COMPRESSION_MASK) { + case FEATURE_COMPRESSION_TYPE1_TYPE2_TYPE3: + features->compression_type3 = true; + case FEATURE_COMPRESSION_TYPE1_TYPE2: + features->compression_type2 = true; + case FEATURE_COMPRESSION_TYPE1: + features->compression_type1 = true; break; + } + +#ifdef GDSYS_LEGACY_DRIVERS + features->interlace = raw_extended_features & EXTENDED_FEATURE_INTERLACE; +#endif + features->osd = raw_features & FEATURE_OSD; +#ifdef GDSYS_LEGACY_DRIVERS + features->compression_pipes = raw_extended_features & EXTENDED_FEATURE_COMPRESSION_PIPES; +#endif - default: - printf(", audio %d(not supported)", feature_audio); + return 0; +} + +#endif + +bool ioep_fpga_has_osd(unsigned int fpga) +{ + struct fpga_features features; + + get_features(fpga, &features); + + return features.osd; +} + +void ioep_fpga_print_info(unsigned int fpga) +{ + u16 fpga_version; + struct fpga_versions versions; + struct fpga_features features; + + FPGA_GET_REG(fpga, fpga_version, &fpga_version); + get_versions(fpga, &versions); + get_features(fpga, &features); + + if (versions.video_channel) + printf("Videochannel"); + else + printf("Mainchannel"); + + if (versions.con_side) + printf(" User"); + else + printf(" Server"); + +// FIXME +#if 0 + if (versions & (1<<4)) + printf(" UC"); +#endif + + switch(versions.pcb_transmission_type) { + case PCB_CAT_1G: + case PCB_CAT_10G: + printf(" CAT"); + break; + case PCB_FIBER_3G: + case PCB_FIBER_10G: + printf(" Fiber"); + break; + }; + + switch (versions.pcb_video_type) { + case PCB_DVI_SL: + printf(" DVI,"); + break; + case PCB_DP_165MPIX: + printf(" DP 165MPix/s,"); + break; + case PCB_DP_300MPIX: + printf(" DP 300MPix/s,"); + break; + case PCB_HDMI: + printf(" HDMI,"); + break; + case PCB_DP_1_2: + printf(" DP 1.2,"); + break; + case PCB_HDMI_2_0: + printf(" HDMI 2.0,"); break; } + printf(" FPGA V %d.%02d\n features: ", + fpga_version / 100, fpga_version % 100); + + if (!features.compression_type1 && + !features.compression_type2 && + !features.compression_type3) + printf("no compression, "); + + if (features.compression_type1) + printf("type1, "); + + if (features.compression_type2) + printf("type2, "); + + if (features.compression_type3) + printf("type3, "); + + printf("%sosd", features.osd ? "" : "no "); + + if (features.pcm_rx && features.pcm_tx) + printf(", pcm rx+tx"); + else if(features.pcm_rx) + printf(", pcm rx"); + else if(features.pcm_tx) + printf(", pcm tx"); + + if (features.spdif_rx && features.spdif_tx) + printf(", spdif rx+tx"); + else if(features.spdif_rx) + printf(", spdif rx"); + else if(features.spdif_tx) + printf(", spdif tx"); + puts(",\n "); - switch (feature_sysclock) { + switch (features.sysclock) { case SYSCLK_147456: printf("clock 147.456 MHz"); break; - - default: - printf("clock %d(not supported)", feature_sysclock); - break; } - switch (feature_ramconfig) { - case RAM_DDR2_32: + switch (features.ram_config) { + case RAM_DDR2_32BIT_295MBPS: printf(", RAM 32 bit DDR2"); break; - - case RAM_DDR3_32: + case RAM_DDR3_32BIT_590MBPS: printf(", RAM 32 bit DDR3"); break; - - case RAM_DDR3_48: + case RAM_DDR3_48BIT_590MBPS: + case RAM_DDR3_48BIT_1800MBPS: printf(", RAM 48 bit DDR3"); break; - - default: - printf(", RAM %d(not supported)", feature_ramconfig); + case RAM_DDR3_64BIT_1800MBPS: + printf(", RAM 64 bit DDR3"); break; } - printf(", %d carrier(s) %s", feature_carriers, - feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s"); + printf(", %d carrier(s)", features.carriers); - printf(", %d video channel(s)\n", feature_video_channels); + switch(features.carrier_speed) { + case CARRIER_SPEED_1G: + printf(", 1Gbit/s"); + break; + case CARRIER_SPEED_3G: + printf(", 3Gbit/s"); + break; + case CARRIER_SPEED_10G: + printf(", 10Gbit/s"); + break; + } + + printf(", %d video channel(s)\n", features.video_channels); } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/mclink.c b/board/gdsys/common/mclink.c index bf89d4e292..c43d24b26d 100644 --- a/board/gdsys/common/mclink.c +++ b/board/gdsys/common/mclink.c @@ -4,6 +4,8 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <asm/io.h> #include <errno.h> @@ -134,3 +136,5 @@ int mclink_receive(u8 slave, u16 addr, u16 *data) return 0; } + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */ diff --git a/board/gdsys/common/miiphybb.c b/board/gdsys/common/miiphybb.c deleted file mode 100644 index 042835d6af..0000000000 --- a/board/gdsys/common/miiphybb.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2010 - * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc - */ - -#include <common.h> -#include <miiphy.h> - -#include <asm/io.h> - -struct io_bb_pinset { - int mdio; - int mdc; -}; - -static int io_bb_mii_init(struct bb_miiphy_bus *bus) -{ - return 0; -} - -static int io_bb_mdio_active(struct bb_miiphy_bus *bus) -{ - struct io_bb_pinset *pins = bus->priv; - - out_be32((void *)GPIO0_TCR, - in_be32((void *)GPIO0_TCR) | pins->mdio); - - return 0; -} - -static int io_bb_mdio_tristate(struct bb_miiphy_bus *bus) -{ - struct io_bb_pinset *pins = bus->priv; - - out_be32((void *)GPIO0_TCR, - in_be32((void *)GPIO0_TCR) & ~pins->mdio); - - return 0; -} - -static int io_bb_set_mdio(struct bb_miiphy_bus *bus, int v) -{ - struct io_bb_pinset *pins = bus->priv; - - if (v) - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | pins->mdio); - else - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) & ~pins->mdio); - - return 0; -} - -static int io_bb_get_mdio(struct bb_miiphy_bus *bus, int *v) -{ - struct io_bb_pinset *pins = bus->priv; - - *v = ((in_be32((void *)GPIO0_IR) & pins->mdio) != 0); - - return 0; -} - -static int io_bb_set_mdc(struct bb_miiphy_bus *bus, int v) -{ - struct io_bb_pinset *pins = bus->priv; - - if (v) - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | pins->mdc); - else - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) & ~pins->mdc); - - return 0; -} - -static int io_bb_delay(struct bb_miiphy_bus *bus) -{ - udelay(1); - - return 0; -} - -struct io_bb_pinset io_bb_pinsets[] = { - { - .mdio = CONFIG_SYS_MDIO_PIN, - .mdc = CONFIG_SYS_MDC_PIN, - }, -#ifdef CONFIG_SYS_GBIT_MII1_BUSNAME - { - .mdio = CONFIG_SYS_MDIO1_PIN, - .mdc = CONFIG_SYS_MDC1_PIN, - }, -#endif -}; - -struct bb_miiphy_bus bb_miiphy_buses[] = { - { - .name = CONFIG_SYS_GBIT_MII_BUSNAME, - .init = io_bb_mii_init, - .mdio_active = io_bb_mdio_active, - .mdio_tristate = io_bb_mdio_tristate, - .set_mdio = io_bb_set_mdio, - .get_mdio = io_bb_get_mdio, - .set_mdc = io_bb_set_mdc, - .delay = io_bb_delay, - .priv = &io_bb_pinsets[0], - }, -#ifdef CONFIG_SYS_GBIT_MII1_BUSNAME - { - .name = CONFIG_SYS_GBIT_MII1_BUSNAME, - .init = io_bb_mii_init, - .mdio_active = io_bb_mdio_active, - .mdio_tristate = io_bb_mdio_tristate, - .set_mdio = io_bb_set_mdio, - .get_mdio = io_bb_get_mdio, - .set_mdc = io_bb_set_mdc, - .delay = io_bb_delay, - .priv = &io_bb_pinsets[1], - }, -#endif -}; - -int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 392d0059da..10c4329146 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -4,6 +4,8 @@ * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc */ +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS + #include <common.h> #include <i2c.h> #include <malloc.h> @@ -497,3 +499,5 @@ U_BOOT_CMD( "size_x(max. " __stringify(MAX_X_CHARS) ") size_y(max. " __stringify(MAX_Y_CHARS) ")\n" ); + +#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
\ No newline at end of file diff --git a/board/gdsys/common/phy.c b/board/gdsys/common/phy.c index c4b2256da3..d40c08d9e9 100644 --- a/board/gdsys/common/phy.c +++ b/board/gdsys/common/phy.c @@ -45,8 +45,6 @@ struct mii_setupcmd fixup_88e1518[] = { { MIICMD_SET, 16, 0x214d }, { MIICMD_SET, 17, 0xcc0c }, { MIICMD_SET, 16, 0x2159 }, - { MIICMD_SET, 22, 0x00fb }, - { MIICMD_SET, 7, 0xc00d }, { MIICMD_SET, 22, 0x0000 }, }; diff --git a/board/gdsys/mpc8308/Kconfig b/board/gdsys/mpc8308/Kconfig index 9d99f68692..30811889fb 100644 --- a/board/gdsys/mpc8308/Kconfig +++ b/board/gdsys/mpc8308/Kconfig @@ -4,6 +4,35 @@ config GDSYS_LEGACY_OSD_CMDS Use the 'osdw', 'osdp', and 'osdsize' legacy commands required by gdsys devices. +config GDSYS_LEGACY_DRIVERS + bool + help + Enable the gdsys legacy drivers under board/gdsys/common. If this + option is not set, all relevant DM drivers must be configured for the + device in question. + +config SYS_FPGA0_BASE + hex + default E0600000 + help + The base address of the first FPGA's register map. + +config SYS_FPGA0_SIZE + hex + default 1 + help + The base address of the first FPGA's register map. + +config SYS_FPGA1_BASE + hex + help + The base address of the second FPGA's register map. + +config SYS_FPGA1_SIZE + hex + help + The base address of the second FPGA's register map. + if TARGET_HRCON config SYS_BOARD @@ -18,6 +47,9 @@ config SYS_CONFIG_NAME config GDSYS_LEGACY_OSD_CMDS default y +config GDSYS_LEGACY_DRIVERS + default y + endif if TARGET_STRIDER @@ -33,9 +65,60 @@ config SYS_CONFIG_NAME config GDSYS_LEGACY_OSD_CMDS default y + +config GDSYS_LEGACY_DRIVERS + default y + +endif + +if TARGET_GAZERBEAM + +config SYS_BOARD + default "mpc8308" + +config SYS_VENDOR + default "gdsys" + +config SYS_CONFIG_NAME + default "gazerbeam" + +config SYS_FPGA1_BASE + default E0700000 + +config SYS_FPGA1_SIZE + default 1 + +config GDSYS_LEGACY_OSD_CMDS + default y endif +if TARGET_HRCON || TARGET_STRIDER || TARGET_GAZERBEAM + +choice + prompt "FPGA flavor selection" + +config SYS_FPGA_FLAVOR_LEGACY + bool "Legacy flavor" + help + This enables support for the gdsys pre-Gazerbeam FPGA memory layout. + +config SYS_FPGA_FLAVOR_GAZERBEAM + bool "Gazerbeam flavor" + help + This enables support for the gdsys FPGA memory layout of the + Gazerbeam board. + +endchoice + +config EXTENDED_FEATURES + bool "FPGA extended features" + depends on GDSYS_LEGACY_DRIVERS + help + Enable support for the extended features field of the IHS FPGA. + config CMD_IOLOOP bool "Enable 'ioloop' and 'ioreflect' commands" help These commands provide FPGA tests. + +endif diff --git a/board/gdsys/mpc8308/MAINTAINERS b/board/gdsys/mpc8308/MAINTAINERS index 755b9a2385..ed1b6fa106 100644 --- a/board/gdsys/mpc8308/MAINTAINERS +++ b/board/gdsys/mpc8308/MAINTAINERS @@ -6,7 +6,9 @@ F: include/configs/hrcon.h F: configs/hrcon_defconfig F: configs/hrcon_dh_defconfig F: include/configs/strider.h +F: configs/strider_defconfig F: configs/strider_cpu_defconfig F: configs/strider_cpu_dp_defconfig F: configs/strider_con_defconfig F: configs/strider_con_dp_defconfig +F: configs/gazerbeam_defconfig diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile index 60d2232573..9af5fe04d1 100644 --- a/board/gdsys/mpc8308/Makefile +++ b/board/gdsys/mpc8308/Makefile @@ -4,5 +4,6 @@ # Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc obj-y := mpc8308.o sdram.o -obj-$(CONFIG_HRCON) += hrcon.o -obj-$(CONFIG_STRIDER) += strider.o +obj-$(CONFIG_TARGET_HRCON) += hrcon.o +obj-$(CONFIG_TARGET_STRIDER) += strider.o +obj-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.o diff --git a/board/gdsys/mpc8308/gazerbeam.c b/board/gdsys/mpc8308/gazerbeam.c new file mode 100644 index 0000000000..cd621744d2 --- /dev/null +++ b/board/gdsys/mpc8308/gazerbeam.c @@ -0,0 +1,179 @@ +/* + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <board.h> +#include <dm.h> +#include <fdt_support.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <misc.h> +#include <tpm-v1.h> +#include <video_osd.h> + +#include "../common/ihs_mdio.h" +#include "../../../drivers/board/gazerbeam.h" + +DECLARE_GLOBAL_DATA_PTR; + +struct ihs_mdio_info ihs_mdio_info[] = { + { .fpga = NULL, .name = "ihs0", .base = 0x58 }, + { .fpga = NULL, .name = "ihs1", .base = 0x58 }, +}; + +static int get_tpm(struct udevice **devp) +{ + int rc; + + rc = uclass_first_device_err(UCLASS_TPM, devp); + if (rc) { + printf("Could not find TPM (ret=%d)\n", rc); + return CMD_RET_FAILURE; + } + + return 0; +} + +int board_early_init_r(void) +{ + struct udevice *board; + struct udevice *serdes; + int mc = 0; + int con = 0; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + /* Initialize serdes */ + uclass_get_device_by_phandle(UCLASS_MISC, board, "serdes", &serdes); + + if (board_detect(board)) + puts("Device information detection failed.\n"); + + board_get_int(board, BOARD_MULTICHANNEL, &mc); + board_get_int(board, BOARD_VARIANT, &con); + + if (mc == 2 || mc == 1) + dev_disable_by_path("/immr@e0000000/i2c@3100/pca9698@22"); + + if (mc == 4) { + dev_disable_by_path("/immr@e0000000/i2c@3100/pca9698@20"); + dev_enable_by_path("/localbus@e0005000/iocon_uart@2,0"); + dev_enable_by_path("/fpga1bus"); + } + + if (mc == 2 || con == VAR_CON) { + dev_enable_by_path("/fpga0bus/fpga0_video1"); + dev_enable_by_path("/fpga0bus/fpga0_iic_video1"); + dev_enable_by_path("/fpga0bus/fpga0_axi_video1"); + } + + if (con == VAR_CON) { + dev_enable_by_path("/fpga0bus/fpga0_video0"); + dev_enable_by_path("/fpga0bus/fpga0_iic_video0"); + dev_enable_by_path("/fpga0bus/fpga0_axi_video0"); + } + + return 0; +} + +int checkboard(void) +{ + struct udevice *board; + char *s = env_get("serial#"); + int mc = 0; + int con = 0; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + board_get_int(board, BOARD_MULTICHANNEL, &mc); + board_get_int(board, BOARD_VARIANT, &con); + + puts("Board: Gazerbeam "); + printf("%s ", mc == 4 ? "MC4" : mc == 2 ? "MC2" : "SC"); + printf("%s", con == VAR_CON ? "CON" : "CPU"); + + if (s) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void display_osd_info(struct udevice *osd, + struct video_osd_info *osd_info) +{ + printf("OSD-%s: Digital-OSD version %01d.%02d, %d x %d characters\n", + osd->name, osd_info->major_version, osd_info->minor_version, + osd_info->width, osd_info->height); +} + +int last_stage_init(void) +{ + int fpga_hw_rev = 0; + int i; + struct udevice *board; + struct udevice *osd; + struct video_osd_info osd_info; + struct udevice *tpm; + int ret; + + if (board_get(&board)) + puts("Could not find board information device.\n"); + + if (board) { + int res = board_get_int(board, BOARD_HWVERSION, &fpga_hw_rev); + + if (res) + printf("Could not determind FPGA HW revision (res = %d)\n", res); + } + + env_set_ulong("fpga_hw_rev", fpga_hw_rev); + + ret = get_tpm(&tpm); + if (ret || tpm_init(tpm) || tpm_startup(tpm, TPM_ST_CLEAR) || + tpm_continue_self_test(tpm)) { + printf("TPM init failed\n"); + } + + if (fpga_hw_rev >= 4) { + for (i = 0; i < 4; i++) { + struct udevice *rxaui; + char name[8]; + + snprintf(name, sizeof(name), "rxaui%d", i); + /* Disable RXAUI polarity inversion */ + ret = uclass_get_device_by_phandle(UCLASS_MISC, board, name, &rxaui); + if (!ret) + misc_set_enabled(rxaui, false); + } + } + + for (uclass_first_device(UCLASS_VIDEO_OSD, &osd); + osd; + uclass_next_device(&osd)) { + video_osd_get_info(osd, &osd_info); + display_osd_info(osd, &osd_info); + } + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fsl_fdt_fixup_dr_usb(blob, bd); + fdt_fixup_esdhc(blob, bd); + + return 0; +} +#endif diff --git a/board/gdsys/mpc8308/hrcon.c b/board/gdsys/mpc8308/hrcon.c index 2d709dee94..d14a28ec94 100644 --- a/board/gdsys/mpc8308/hrcon.c +++ b/board/gdsys/mpc8308/hrcon.c @@ -35,11 +35,11 @@ #define MAX_MUX_CHANNELS 2 enum { - MCFPGA_DONE = 1 << 0, - MCFPGA_INIT_N = 1 << 1, - MCFPGA_PROGRAM_N = 1 << 2, - MCFPGA_UPDATE_ENABLE_N = 1 << 3, - MCFPGA_RESET_N = 1 << 4, + MCFPGA_DONE = BIT(0), + MCFPGA_INIT_N = BIT(1), + MCFPGA_PROGRAM_N = BIT(2), + MCFPGA_UPDATE_ENABLE_N = BIT(3), + MCFPGA_RESET_N = BIT(4), }; enum { @@ -47,7 +47,7 @@ enum { GPIO_MDIO = 1 << 15, }; -unsigned int mclink_fpgacount; +uint mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; struct { @@ -107,7 +107,7 @@ int checkboard(void) printf("HRCon %s", hw_type_cat ? "CAT" : "Fiber"); - if (s != NULL) { + if (s) { puts(", serial# "); puts(s); } @@ -120,12 +120,11 @@ int checkboard(void) int last_stage_init(void) { int slaves; - unsigned int k; - unsigned int mux_ch; - unsigned char mclink_controllers[] = { 0x3c, 0x3d, 0x3e }; + uint k; + uchar mclink_controllers[] = { 0x3c, 0x3d, 0x3e }; u16 fpga_features; bool hw_type_cat = pca9698_get_value(0x20, 20); - bool ch0_rgmii2_present = false; + bool ch0_rgmii2_present; FPGA_GET_REG(0, fpga_features, &fpga_features); @@ -137,16 +136,16 @@ int last_stage_init(void) /* wait for FPGA done, then reset FPGA */ for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { - unsigned int ctr = 0; + uint ctr = 0; if (i2c_probe(mclink_controllers[k])) continue; while (!(pca953x_get_val(mclink_controllers[k]) & MCFPGA_DONE)) { - udelay(100000); + mdelay(100); if (ctr++ > 5) { - printf("no done for mclink_controller %d\n", k); + printf("no done for mclink_controller %u\n", k); break; } } @@ -159,8 +158,10 @@ int last_stage_init(void) } if (hw_type_cat) { + uint mux_ch; int retval; struct mii_dev *mdiodev = mdio_alloc(); + if (!mdiodev) return -ENOMEM; strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN); @@ -179,7 +180,7 @@ int last_stage_init(void) } /* give slave-PLLs and Parade DP501 some time to be up and running */ - udelay(500000); + mdelay(500); mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; slaves = mclink_probe(); @@ -207,6 +208,7 @@ int last_stage_init(void) if (hw_type_cat) { int retval; struct mii_dev *mdiodev = mdio_alloc(); + if (!mdiodev) return -ENOMEM; strncpy(mdiodev->name, bb_miiphy_buses[k].name, @@ -233,17 +235,17 @@ int last_stage_init(void) * provide access to fpga gpios and controls (for I2C bitbang) * (these may look all too simple but make iocon.h much more readable) */ -void fpga_gpio_set(unsigned int bus, int pin) +void fpga_gpio_set(uint bus, int pin) { FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.set, pin); } -void fpga_gpio_clear(unsigned int bus, int pin) +void fpga_gpio_clear(uint bus, int pin) { FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, gpio.clear, pin); } -int fpga_gpio_get(unsigned int bus, int pin) +int fpga_gpio_get(uint bus, int pin) { u16 val; @@ -252,7 +254,7 @@ int fpga_gpio_get(unsigned int bus, int pin) return val & pin; } -void fpga_control_set(unsigned int bus, int pin) +void fpga_control_set(uint bus, int pin) { u16 val; @@ -260,7 +262,7 @@ void fpga_control_set(unsigned int bus, int pin) FPGA_SET_REG(bus >= 4 ? (bus - 4) : bus, control, val | pin); } -void fpga_control_clear(unsigned int bus, int pin) +void fpga_control_clear(uint bus, int pin) { u16 val; @@ -273,7 +275,7 @@ void mpc8308_init(void) pca9698_direction_output(0x20, 4, 1); } -void mpc8308_set_fpga_reset(unsigned state) +void mpc8308_set_fpga_reset(uint state) { pca9698_set_value(0x20, 4, state ? 0 : 1); } @@ -285,11 +287,11 @@ void mpc8308_setup_hw(void) /* * set "startup-finished"-gpios */ - setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12))); - setbits_be32(&immr->gpio[0].dat, 1 << (31-12)); + setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12)); + setbits_gpio0_out(BIT(31 - 12)); } -int mpc8308_get_fpga_done(unsigned fpga) +int mpc8308_get_fpga_done(uint fpga) { return pca9698_get_value(0x20, 19); } @@ -367,7 +369,7 @@ int ft_board_setup(void *blob, bd_t *bd) */ struct fpga_mii { - unsigned fpga; + uint fpga; int mdio; } fpga_mii[] = { { 0, 1}, @@ -494,5 +496,4 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { }, }; -int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); +int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses); diff --git a/board/gdsys/mpc8308/mpc8308.c b/board/gdsys/mpc8308/mpc8308.c index 0112244fc7..ae77fc2fd1 100644 --- a/board/gdsys/mpc8308/mpc8308.c +++ b/board/gdsys/mpc8308/mpc8308.c @@ -24,14 +24,34 @@ DECLARE_GLOBAL_DATA_PTR; -int get_fpga_state(unsigned dev) +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS +/* as gpio output status cannot be read back, we have to buffer it locally */ +u32 gpio0_out; + +void setbits_gpio0_out(u32 mask) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + + gpio0_out |= mask; + out_be32(&immr->gpio[0].dat, gpio0_out); +} + +void clrbits_gpio0_out(u32 mask) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + + gpio0_out &= ~mask; + out_be32(&immr->gpio[0].dat, gpio0_out); +} + +int get_fpga_state(uint dev) { return gd->arch.fpga_state[dev]; } int board_early_init_f(void) { - unsigned k; + uint k; for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) gd->arch.fpga_state[k] = 0; @@ -41,8 +61,8 @@ int board_early_init_f(void) int board_early_init_r(void) { - unsigned k; - unsigned ctr; + uint k; + uint ctr; for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) gd->arch.fpga_state[k] = 0; @@ -59,7 +79,7 @@ int board_early_init_r(void) for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { ctr = 0; while (!mpc8308_get_fpga_done(k)) { - udelay(100000); + mdelay(100); if (ctr++ > 5) { gd->arch.fpga_state[k] |= FPGA_STATE_DONE_FAILED; @@ -86,7 +106,7 @@ int board_early_init_r(void) if (val == REFLECTION_TESTPATTERN_INV) break; - udelay(100000); + mdelay(100); if (ctr++ > 5) { gd->arch.fpga_state[k] |= FPGA_STATE_REFLECTION_FAILED; @@ -97,3 +117,4 @@ int board_early_init_r(void) return 0; } +#endif diff --git a/board/gdsys/mpc8308/mpc8308.h b/board/gdsys/mpc8308/mpc8308.h index dc07d564eb..1e4f24fb2a 100644 --- a/board/gdsys/mpc8308/mpc8308.h +++ b/board/gdsys/mpc8308/mpc8308.h @@ -1,6 +1,9 @@ #ifndef __MPC8308_H_ #define __MPC8308_H_ +void setbits_gpio0_out(u32 mask); +void clrbits_gpio0_out(u32 mask); + /* functions to be provided by board implementation */ void mpc8308_init(void); void mpc8308_set_fpga_reset(unsigned state); diff --git a/board/gdsys/mpc8308/sdram.c b/board/gdsys/mpc8308/sdram.c index 5ced8eb081..2a77fed270 100644 --- a/board/gdsys/mpc8308/sdram.c +++ b/board/gdsys/mpc8308/sdram.c @@ -11,6 +11,8 @@ * board\freescale\mpc8315erdb\sdram.c */ +#ifndef CONFIG_MPC83XX_SDRAM + #include <common.h> #include <mpc83xx.h> #include <spd_sdram.h> @@ -34,7 +36,7 @@ static long fixed_sdram(void) u32 msize_log2 = __ilog2(msize); out_be32(&im->sysconf.ddrlaw[0].bar, - CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000); + CONFIG_SYS_SDRAM_BASE & 0xfffff000); out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); @@ -62,7 +64,7 @@ static long fixed_sdram(void) setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); sync(); - return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); + return get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); } int dram_init(void) @@ -81,3 +83,5 @@ int dram_init(void) return 0; } + +#endif /* !CONFIG_MPC83XX_SDRAM */ diff --git a/board/gdsys/mpc8308/strider.c b/board/gdsys/mpc8308/strider.c index fa26585296..1fdea675bd 100644 --- a/board/gdsys/mpc8308/strider.c +++ b/board/gdsys/mpc8308/strider.c @@ -50,7 +50,7 @@ enum { GPIO_MDIO = 1 << 15, }; -unsigned int mclink_fpgacount; +uint mclink_fpgacount; struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; struct { @@ -110,7 +110,7 @@ int checkboard(void) printf("Strider %s", hw_type_cat ? "CAT" : "Fiber"); - if (s != NULL) { + if (s) { puts(", serial# "); puts(s); } @@ -123,17 +123,17 @@ int checkboard(void) int last_stage_init(void) { int slaves; - unsigned int k; - unsigned int mux_ch; - unsigned char mclink_controllers_dvi[] = { 0x3c, 0x3d, 0x3e }; + uint k; + uint mux_ch; + uchar mclink_controllers_dvi[] = { 0x3c, 0x3d, 0x3e }; #ifdef CONFIG_STRIDER_CPU - unsigned char mclink_controllers_dp[] = { 0x24, 0x25, 0x26 }; + uchar mclink_controllers_dp[] = { 0x24, 0x25, 0x26 }; #endif bool hw_type_cat = pca9698_get_value(0x20, 18); #ifdef CONFIG_STRIDER_CON_DP bool is_dh = pca9698_get_value(0x20, 25); #endif - bool ch0_sgmii2_present = false; + bool ch0_sgmii2_present; /* Turn on Analog Devices ADV7611 */ pca9698_direction_output(0x20, 8, 0); @@ -146,8 +146,8 @@ int last_stage_init(void) /* wait for FPGA done, then reset FPGA */ for (k = 0; k < ARRAY_SIZE(mclink_controllers_dvi); ++k) { - unsigned int ctr = 0; - unsigned char *mclink_controllers = mclink_controllers_dvi; + uint ctr = 0; + uchar *mclink_controllers = mclink_controllers_dvi; #ifdef CONFIG_STRIDER_CPU if (i2c_probe(mclink_controllers[k])) { @@ -161,7 +161,7 @@ int last_stage_init(void) #endif while (!(pca953x_get_val(mclink_controllers[k]) & MCFPGA_DONE)) { - udelay(100000); + mdelay(100); if (ctr++ > 5) { printf("no done for mclink_controller %d\n", k); break; @@ -178,6 +178,7 @@ int last_stage_init(void) if (hw_type_cat) { int retval; struct mii_dev *mdiodev = mdio_alloc(); + if (!mdiodev) return -ENOMEM; strncpy(mdiodev->name, bb_miiphy_buses[0].name, MDIO_NAME_LEN); @@ -196,7 +197,7 @@ int last_stage_init(void) } /* give slave-PLLs and Parade DP501 some time to be up and running */ - udelay(500000); + mdelay(500); mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; slaves = mclink_probe(); @@ -235,7 +236,7 @@ int last_stage_init(void) for (k = 1; k <= slaves; ++k) FPGA_SET_REG(k, extended_control, 0x10); /* enable video */ - udelay(500000); + mdelay(500); #endif for (k = 1; k <= slaves; ++k) { @@ -260,6 +261,7 @@ int last_stage_init(void) if (hw_type_cat) { int retval; struct mii_dev *mdiodev = mdio_alloc(); + if (!mdiodev) return -ENOMEM; strncpy(mdiodev->name, bb_miiphy_buses[k].name, @@ -286,17 +288,17 @@ int last_stage_init(void) * provide access to fpga gpios (for I2C bitbang) * (these may look all too simple but make iocon.h much more readable) */ -void fpga_gpio_set(unsigned int bus, int pin) +void fpga_gpio_set(uint bus, int pin) { FPGA_SET_REG(bus, gpio.set, pin); } -void fpga_gpio_clear(unsigned int bus, int pin) +void fpga_gpio_clear(uint bus, int pin) { FPGA_SET_REG(bus, gpio.clear, pin); } -int fpga_gpio_get(unsigned int bus, int pin) +int fpga_gpio_get(uint bus, int pin) { u16 val; @@ -306,7 +308,7 @@ int fpga_gpio_get(unsigned int bus, int pin) } #ifdef CONFIG_STRIDER_CON_DP -void fpga_control_set(unsigned int bus, int pin) +void fpga_control_set(uint bus, int pin) { u16 val; @@ -314,7 +316,7 @@ void fpga_control_set(unsigned int bus, int pin) FPGA_SET_REG(bus, control, val | pin); } -void fpga_control_clear(unsigned int bus, int pin) +void fpga_control_clear(uint bus, int pin) { u16 val; @@ -328,7 +330,7 @@ void mpc8308_init(void) pca9698_direction_output(0x20, 26, 1); } -void mpc8308_set_fpga_reset(unsigned state) +void mpc8308_set_fpga_reset(uint state) { pca9698_set_value(0x20, 26, state ? 0 : 1); } @@ -340,11 +342,11 @@ void mpc8308_setup_hw(void) /* * set "startup-finished"-gpios */ - setbits_be32(&immr->gpio[0].dir, (1 << (31-11)) | (1 << (31-12))); - setbits_be32(&immr->gpio[0].dat, 1 << (31-12)); + setbits_be32(&immr->gpio[0].dir, BIT(31 - 11) | BIT(31 - 12)); + setbits_gpio0_out(BIT(31 - 12)); } -int mpc8308_get_fpga_done(unsigned fpga) +int mpc8308_get_fpga_done(uint fpga) { return pca9698_get_value(0x20, 20); } @@ -422,7 +424,7 @@ int ft_board_setup(void *blob, bd_t *bd) */ struct fpga_mii { - unsigned fpga; + uint fpga; int mdio; } fpga_mii[] = { { 0, 1}, @@ -549,5 +551,4 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { }, }; -int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / - sizeof(bb_miiphy_buses[0]); +int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses); diff --git a/board/gdsys/p1022/Kconfig b/board/gdsys/p1022/Kconfig index 8514d086b9..f5154271d1 100644 --- a/board/gdsys/p1022/Kconfig +++ b/board/gdsys/p1022/Kconfig @@ -1,3 +1,10 @@ +config GDSYS_LEGACY_DRIVERS + bool + help + Enable the gdsys legacy drivers under board/gdsys/common. If this + option is not set, all relevant DM drivers must be configured for the + device in question. + if TARGET_CONTROLCENTERD config SYS_BOARD @@ -9,4 +16,7 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "controlcenterd" +config GDSYS_LEGACY_DRIVERS + default y + endif diff --git a/board/ids/ids8313/ids8313.c b/board/ids/ids8313/ids8313.c index d547af4b05..caa36064f0 100644 --- a/board/ids/ids8313/ids8313.c +++ b/board/ids/ids8313/ids8313.c @@ -57,7 +57,7 @@ int fixed_sdram(unsigned long config) u32 msize_log2 = __ilog2(msize); out_be32(&im->sysconf.ddrlaw[0].bar, - (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); + (CONFIG_SYS_SDRAM_BASE & 0xfffff000)); out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); sync(); @@ -96,7 +96,7 @@ int fixed_sdram(unsigned long config) setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); /* now check the real size */ disable_addr_trans(); - msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); + msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); enable_addr_trans(); #endif return msize; @@ -129,8 +129,8 @@ int dram_init(void) msize = setup_sdram(); - out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); - out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); + out_be32(&lbc->lbcr, (0x00040000 | (0xFF << LBCR_BMT_SHIFT) | 0xF)); + out_be32(&lbc->mrtpr, 0x20000000); sync(); gd->ram_size = msize; diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index d6c594c96a..fbbbb17034 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -1,4 +1,4 @@ -if TARGET_KM8360 +if TARGET_KMETER1 config SYS_BOARD default "km83xx" @@ -7,7 +7,46 @@ config SYS_VENDOR default "keymile" config SYS_CONFIG_NAME - default "km8360" + default "kmeter1" + +endif + +if TARGET_KMCOGE5NE + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmcoge5ne" + +endif + +if TARGET_KMVECT1 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmvect1" + +endif + +if TARGET_KMTEGR1 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmtegr1" endif @@ -36,3 +75,55 @@ config SYS_CONFIG_NAME default "tuxx1" endif + +if TARGET_KMSUPX5 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmsupx5" + +endif + +if TARGET_TUGE1 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "tuge1" + +endif + +if TARGET_KMOPTI2 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmopti2" + +endif + +if TARGET_KMTEPR2 + +config SYS_BOARD + default "km83xx" + +config SYS_VENDOR + default "keymile" + +config SYS_CONFIG_NAME + default "kmtepr2" + +endif diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 4818a4994a..880ce67fa6 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -33,7 +33,7 @@ static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; const qe_iop_conf_t qe_iop_conf_tab[] = { /* port pin dir open_drain assign */ -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) /* MDIO */ {0, 1, 3, 0, 2}, /* MDIO */ {0, 2, 1, 0, 1}, /* MDC */ @@ -56,7 +56,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 2, 1, 0, 1}, /* UART2_RTS */ {5, 3, 2, 0, 2}, /* UART2_SIN */ {5, 1, 2, 0, 3}, /* UART2_CTS */ -#elif !defined(CONFIG_MPC8309) +#elif !defined(CONFIG_ARCH_MPC8309) /* Local Bus */ {0, 16, 1, 0, 3}, /* LA00 */ {0, 17, 1, 0, 3}, /* LA01 */ @@ -148,7 +148,7 @@ int board_early_init_r(void) u32 *mxmr = &lbc->mamr; #endif -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) unsigned short svid; /* * Because of errata in the UCCs, we have to write to the reserved @@ -271,7 +271,7 @@ int last_stage_init(void) } #endif -#if defined(CONFIG_KMCOGE5NE) +#if defined(CONFIG_TARGET_KMCOGE5NE) struct bfticu_iomap *base = (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE; u8 dip_switch = in_8((u8 *)&(base->mswitch)) & BFTICU_DIPSWITCH_MASK; @@ -311,7 +311,7 @@ static int fixed_sdram(void) msize = CONFIG_SYS_DDR_SIZE << 20; disable_addr_trans(); - msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize); + msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); enable_addr_trans(); msize /= (1024 * 1024); if (CONFIG_SYS_DDR_SIZE != msize) { @@ -338,7 +338,7 @@ int dram_init(void) return -ENXIO; out_be32(&im->sysconf.ddrlaw[0].bar, - CONFIG_SYS_DDR_BASE & LAWBAR_BAR); + CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR); msize = fixed_sdram(); #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) diff --git a/board/mpc8308_p1m/sdram.c b/board/mpc8308_p1m/sdram.c index 4118c019cc..baf70d8807 100644 --- a/board/mpc8308_p1m/sdram.c +++ b/board/mpc8308_p1m/sdram.c @@ -29,7 +29,7 @@ static long fixed_sdram(void) u32 msize_log2 = __ilog2(msize); out_be32(&im->sysconf.ddrlaw[0].bar, - CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000); + CONFIG_SYS_SDRAM_BASE & 0xfffff000); out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); @@ -57,7 +57,7 @@ static long fixed_sdram(void) setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); sync(); - return get_ram_size(CONFIG_SYS_DDR_SDRAM_BASE, msize); + return get_ram_size(CONFIG_SYS_SDRAM_BASE, msize); } int dram_init(void) diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index b8ba29ac6d..a647de6b11 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -45,7 +45,7 @@ int dram_init(void) return -1; /* DDR SDRAM - Main SODIMM */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) msize = spd_sdram(); #else @@ -79,19 +79,19 @@ int fixed_sdram(void) u32 ddr_size = msize << 20; /* DDR size in bytes */ u32 ddr_size_log2 = __ilog2(msize); - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); #if (CONFIG_SYS_DDR_SIZE != 256) #warning Currently any ddr size other than 256 is not supported #endif -#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) #warning Chip select bounds is only configurable in 16MB increments #endif im->ddr.csbnds[2].csbnds = - ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_SDRAM_BASE + ddr_size - 1) >> CSBNDS_EA_SHIFT) & CSBNDS_EA); im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; @@ -147,6 +147,9 @@ void sdram_init(void) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile fsl_lbc_t *lbc = &immap->im_lbc; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; + const u32 lsdmr_common = LSDMR_RFEN | LSDMR_BSMA1516 | LSDMR_RFCR8 | + LSDMR_PRETOACT6 | LSDMR_ACTTORW3 | LSDMR_BL8 | + LSDMR_WRC3 | LSDMR_CL3; puts("\n SDRAM on Local Bus: "); print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); @@ -156,22 +159,27 @@ void sdram_init(void) */ /* setup mtrpt, lsrt and lbcr for LB bus */ - lbc->lbcr = CONFIG_SYS_LBC_LBCR; - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; - lbc->lsrt = CONFIG_SYS_LBC_LSRT; + lbc->lbcr = 0x00000000; + /* LB refresh timer prescal, 266MHz/32 */ + lbc->mrtpr = 0x20000000; + /* LB sdram refresh timer, about 6us */ + lbc->lsrt = 0x32000000; asm("sync"); /* * Configure the SDRAM controller Machine Mode Register. */ - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ + /* 0x40636733; normal operation */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */ + /* 0x68636733; precharge all the banks */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL; asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */ + /* 0x48636733; auto refresh */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH; asm("sync"); /*1 times*/ *sdram_addr = 0xff; @@ -199,12 +207,13 @@ void sdram_init(void) udelay(100); /* 0x58636733; mode register write operation */ - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4; + lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW; asm("sync"); *sdram_addr = 0xff; udelay(100); - lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */ + /* 0x40636733; normal operation */ + lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL; asm("sync"); *sdram_addr = 0xff; udelay(100); diff --git a/board/tqc/tqm834x/pci.c b/board/tqc/tqm834x/pci.c index 34c68ac463..c9b05e44c2 100644 --- a/board/tqc/tqm834x/pci.c +++ b/board/tqc/tqm834x/pci.c @@ -71,7 +71,7 @@ pci_init_board(void) reg32 = 0xff000000; #endif if (clk->spmr & SPMR_CKID) { - /* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR + /* PCI Clock is half CONFIG_SYS_CLK_FREQ so need to set up OCCR * fields accordingly */ reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR); diff --git a/board/tqc/tqm834x/tqm834x.c b/board/tqc/tqm834x/tqm834x.c index 7c92f4f54c..04941b26be 100644 --- a/board/tqc/tqm834x/tqm834x.c +++ b/board/tqc/tqm834x/tqm834x.c @@ -72,13 +72,13 @@ int dram_init(void) int cs; /* during size detection, set up the max DDRLAW size */ - im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE; + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_SDRAM_BASE; im->sysconf.ddrlaw[0].ar = (LAWAR_EN | LAWAR_SIZE_2G); /* set CS bounds to maximum size */ for(cs = 0; cs < 4; ++cs) { set_cs_bounds(cs, - CONFIG_SYS_DDR_BASE + (cs * DDR_MAX_SIZE_PER_CS), + CONFIG_SYS_SDRAM_BASE + (cs * DDR_MAX_SIZE_PER_CS), DDR_MAX_SIZE_PER_CS); set_cs_config(cs, INITIAL_CS_CONFIG); @@ -102,7 +102,7 @@ int dram_init(void) debug("\nDetecting Bank%d\n", cs); bank_size = get_ddr_bank_size(cs, - (long *)(CONFIG_SYS_DDR_BASE + size)); + (long *)(CONFIG_SYS_SDRAM_BASE + size)); size += bank_size; debug("DDR Bank%d size: %ld MiB\n\n", cs, bank_size >> 20); @@ -235,8 +235,8 @@ static int detect_num_flash_banks(void) debug("Number of flash banks detected: %d\n", cfi_flash_num_flash_banks); /* set OR0 and BR0 */ - set_lbc_or(0, CONFIG_SYS_OR_TIMING_FLASH | - (-(total_size) & OR_GPCM_AM)); + set_lbc_or(0, OR_GPCM_CSNT | OR_GPCM_ACS_DIV4 | OR_GPCM_SCY_5 | + OR_GPCM_TRLX | (-(total_size) & OR_GPCM_AM)); set_lbc_br(0, (CONFIG_SYS_FLASH_BASE & BR_BA) | (BR_MS_GPCM | BR_PS_32 | BR_V)); diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c index f0fc1fe3b3..1559ff210d 100644 --- a/board/ve8313/ve8313.c +++ b/board/ve8313/ve8313.c @@ -38,7 +38,7 @@ static long fixed_sdram(void) u32 msize_log2 = __ilog2(msize); out_be32(&im->sysconf.ddrlaw[0].bar, - (CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000)); + (CONFIG_SYS_SDRAM_BASE & 0xfffff000)); out_be32(&im->sysconf.ddrlaw[0].ar, (LBLAWAR_EN | (msize_log2 - 1))); out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); @@ -48,12 +48,12 @@ static long fixed_sdram(void) */ __udelay(50000); -#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#if ((CONFIG_SYS_SDRAM_BASE & 0x00FFFFFF) != 0) #warning Chip select bounds is only configurable in 16MB increments #endif out_be32(&im->ddr.csbnds[0].csbnds, - ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | - (((CONFIG_SYS_DDR_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & + ((CONFIG_SYS_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & CSBNDS_EA)); out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); @@ -80,7 +80,7 @@ static long fixed_sdram(void) /* now check the real size */ disable_addr_trans (); - msize = get_ram_size (CONFIG_SYS_DDR_BASE, msize); + msize = get_ram_size (CONFIG_SYS_SDRAM_BASE, msize); enable_addr_trans (); #endif @@ -100,8 +100,8 @@ int dram_init(void) msize = fixed_sdram(); /* Local Bus setup lbcr and mrtpr */ - out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); - out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR); + out_be32(&lbc->lbcr, 0x00040000); + out_be32(&lbc->mrtpr, 0x20000000); sync(); /* return total bus SDRAM size(bytes) -- DDR */ diff --git a/cmd/binop.c b/cmd/binop.c index 787f7a26ea..116a2c0d55 100644 --- a/cmd/binop.c +++ b/cmd/binop.c @@ -2,6 +2,7 @@ #include <common.h> #include <command.h> +#include <hexdump.h> #include <malloc.h> #include <mapmem.h> #include <linux/ctype.h> @@ -26,43 +27,20 @@ void write_to_env_var(char *varname, u8 *result, ulong len) str_ptr += 2; } *str_ptr = '\0'; - setenv(varname, str_output); + env_set(varname, str_output); free(str_output); } -void decode_hexstring(char *hexstr, u8 *result) -{ - int i; - int acc = 0; - - for (i = 0; i < strlen(hexstr); ++i) { - char d = hexstr[i]; - int value; - - if (isdigit(d)) - value = (d - '0'); - else - value = (islower(d) ? toupper(d) : d) - 'A' + 10; - - if (i % 2 == 0) { - acc = value * 16; - } else { - result[i / 2] = acc + value; - acc = 0; - } - } -} - void read_from_env_var(char *varname, u8 *result) { char *str_value; - str_value = getenv(varname); + str_value = env_get(varname); if (str_value) - decode_hexstring(str_value, result); + hex2bin(result, str_value, strlen(str_value) / 2); else - decode_hexstring(varname, result); + hex2bin(result, varname, strlen(varname) / 2); } void read_from_mem(ulong addr, u8 *result, ulong len) diff --git a/configs/MPC8308RDB_defconfig b/configs/MPC8308RDB_defconfig index 06657b2bfe..1a38ebd549 100644 --- a/configs/MPC8308RDB_defconfig +++ b/configs/MPC8308RDB_defconfig @@ -1,7 +1,80 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_MPC8308RDB=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y +CONFIG_SICR_GPIO_A_TSEC2=y +CONFIG_SICR_GPIO_B_TSEC_GTX_CLK125=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y CONFIG_OF_BOARD_SETUP=y @@ -30,3 +103,41 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385_BASE" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y diff --git a/configs/MPC8313ERDB_33_defconfig b/configs/MPC8313ERDB_33_defconfig index 3bb680c217..04eb29ab9e 100644 --- a/configs/MPC8313ERDB_33_defconfig +++ b/configs/MPC8313ERDB_33_defconfig @@ -1,7 +1,84 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8313ERDB_NOR=y +CONFIG_SYSTEM_PLL_FACTOR_5_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO_BASE" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2800000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xFA000000 +CONFIG_LBLAW3_NAME="BCSR" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" @@ -32,3 +109,55 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE2800000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8313ERDB_66_defconfig b/configs/MPC8313ERDB_66_defconfig index bb26a9e381..8bbeb97778 100644 --- a/configs/MPC8313ERDB_66_defconfig +++ b/configs/MPC8313ERDB_66_defconfig @@ -1,7 +1,83 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666667 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8313ERDB_NOR=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO_BASE" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2800000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xFA000000 +CONFIG_LBLAW3_NAME="BCSR" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" @@ -32,3 +108,55 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_1=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE2800000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8313ERDB_NAND_33_defconfig b/configs/MPC8313ERDB_NAND_33_defconfig index 44865711c2..29b12d0040 100644 --- a/configs/MPC8313ERDB_NAND_33_defconfig +++ b/configs/MPC8313ERDB_NAND_33_defconfig @@ -2,8 +2,85 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0x00100000 CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8313ERDB_NAND=y +CONFIG_SYSTEM_PLL_FACTOR_5_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO_BASE" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_NAND_LBLAWBAR_PRELIM_1=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2800000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xFA000000 +CONFIG_LBLAW3_NAME="BCSR" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_33MHZ" @@ -40,3 +117,55 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="NAND" +CONFIG_BR0_OR0_BASE=0xE2800000 +CONFIG_BR0_ERRORCHECKING_BOTH=y +CONFIG_BR0_MACHINE_FCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_32_KBYTES=y +CONFIG_OR0_SCY_1=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_CHT_TWO_CLOCK=y +CONFIG_OR0_CSCT_8_CYCLE=y +CONFIG_OR0_CST_ONE_CLOCK=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FLASH" +CONFIG_BR1_OR1_BASE=0xFE000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_8_MBYTES=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_9=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8313ERDB_NAND_66_defconfig b/configs/MPC8313ERDB_NAND_66_defconfig index 83f0f6d01b..2dc31edccb 100644 --- a/configs/MPC8313ERDB_NAND_66_defconfig +++ b/configs/MPC8313ERDB_NAND_66_defconfig @@ -2,8 +2,84 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0x00100000 CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y +CONFIG_SYS_CLK_FREQ=66666667 CONFIG_MPC83xx=y -CONFIG_TARGET_MPC8313ERDB=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8313ERDB_NAND=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO_BASE" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_NAND_LBLAWBAR_PRELIM_1=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2800000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xFA000000 +CONFIG_LBLAW3_NAME="BCSR" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_66MHZ" @@ -40,3 +116,55 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR_OR_NAND_PRELIM_0=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="NAND" +CONFIG_BR0_OR0_BASE=0xE2800000 +CONFIG_BR0_ERRORCHECKING_BOTH=y +CONFIG_BR0_MACHINE_FCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_32_KBYTES=y +CONFIG_OR0_SCY_1=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_CHT_TWO_CLOCK=y +CONFIG_OR0_CSCT_8_CYCLE=y +CONFIG_OR0_CST_ONE_CLOCK=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FLASH" +CONFIG_BR1_OR1_BASE=0xFE000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_8_MBYTES=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_9=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="BCSR" +CONFIG_BR3_OR3_BASE=0xFA000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8315ERDB_defconfig b/configs/MPC8315ERDB_defconfig index b45369e626..08b5cc5086 100644 --- a/configs/MPC8315ERDB_defconfig +++ b/configs/MPC8315ERDB_defconfig @@ -1,7 +1,88 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666667 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8315ERDB=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_32_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="PCI_MEM_PHYS" +CONFIG_BAT4_BASE=0x80000000 +CONFIG_BAT4_LENGTH_256_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="PCI_MMIO_PHYS" +CONFIG_BAT5_BASE=0x90000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -35,3 +116,32 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC8323ERDB_defconfig b/configs/MPC8323ERDB_defconfig index a1227bfdad..8ea942d7d9 100644 --- a/configs/MPC8323ERDB_defconfig +++ b/configs/MPC8323ERDB_defconfig @@ -1,7 +1,81 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666667 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8323ERDB=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_32_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="PCI_MEM_PHYS" +CONFIG_BAT5_BASE=0x80000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI1_MMIO_PHYS" +CONFIG_BAT6_BASE=0x90000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_INHIBITED=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_OPT_SPEC_READ=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -20,3 +94,19 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC832XEMDS_ATM_defconfig b/configs/MPC832XEMDS_ATM_defconfig index e4c44d90a9..c39f449da9 100644 --- a/configs/MPC832XEMDS_ATM_defconfig +++ b/configs/MPC832XEMDS_ATM_defconfig @@ -1,7 +1,76 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="BCSR" +CONFIG_BAT2_BASE=0xF8000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xFE000000 +CONFIG_BAT3_LENGTH_32_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF8008000 +CONFIG_LBLAW3_NAME="PIB" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PQ_MDS_PIB=1,PQ_MDS_PIB_ATM=1" @@ -21,3 +90,58 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC832XEMDS_HOST_33_defconfig b/configs/MPC832XEMDS_HOST_33_defconfig index 2b03a56245..0e65d21bdb 100644 --- a/configs/MPC832XEMDS_HOST_33_defconfig +++ b/configs/MPC832XEMDS_HOST_33_defconfig @@ -1,7 +1,96 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="BCSR" +CONFIG_BAT2_BASE=0xF8000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xFE000000 +CONFIG_BAT3_LENGTH_32_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI_MEM_PHYS" +CONFIG_BAT6_BASE=0x80000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="PCI1_MMIO_PHYS" +CONFIG_BAT7_BASE=0x90000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF8008000 +CONFIG_LBLAW3_NAME="PIB" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCI_33M,PQ_MDS_PIB=1" @@ -21,3 +110,58 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC832XEMDS_HOST_66_defconfig b/configs/MPC832XEMDS_HOST_66_defconfig index 4aa34dc331..472384fa14 100644 --- a/configs/MPC832XEMDS_HOST_66_defconfig +++ b/configs/MPC832XEMDS_HOST_66_defconfig @@ -1,7 +1,96 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="BCSR" +CONFIG_BAT2_BASE=0xF8000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xFE000000 +CONFIG_BAT3_LENGTH_32_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI_MEM_PHYS" +CONFIG_BAT6_BASE=0x80000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="PCI1_MMIO_PHYS" +CONFIG_BAT7_BASE=0x90000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF8008000 +CONFIG_LBLAW3_NAME="PIB" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCI_66M,PQ_MDS_PIB=1" @@ -21,3 +110,58 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC832XEMDS_SLAVE_defconfig b/configs/MPC832XEMDS_SLAVE_defconfig index 332088934a..ec8a94cd2a 100644 --- a/configs/MPC832XEMDS_SLAVE_defconfig +++ b/configs/MPC832XEMDS_SLAVE_defconfig @@ -1,7 +1,93 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="BCSR" +CONFIG_BAT2_BASE=0xF8000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xFE000000 +CONFIG_BAT3_LENGTH_32_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI_MEM_PHYS" +CONFIG_BAT6_BASE=0x80000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="PCI1_MMIO_PHYS" +CONFIG_BAT7_BASE=0x90000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF8008000 +CONFIG_LBLAW3_NAME="PIB" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE" @@ -21,3 +107,58 @@ CONFIG_SYS_FLASH_PROTECTION=y CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC832XEMDS_defconfig b/configs/MPC832XEMDS_defconfig index f3ec967b3c..8a26001f7f 100644 --- a/configs/MPC832XEMDS_defconfig +++ b/configs/MPC832XEMDS_defconfig @@ -1,7 +1,76 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC832XEMDS=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="BCSR" +CONFIG_BAT2_BASE=0xF8000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xFE000000 +CONFIG_BAT3_LENGTH_32_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF8008000 +CONFIG_LBLAW3_NAME="PIB" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -20,3 +89,58 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="PIB1" +CONFIG_BR2_OR2_BASE=0xF8008000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_XAM_SET=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PIB2" +CONFIG_BR3_OR3_BASE=0xF8010000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_XAM_SET=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/MPC8349EMDS_PCI64_defconfig b/configs/MPC8349EMDS_PCI64_defconfig new file mode 100644 index 0000000000..35b394ba6a --- /dev/null +++ b/configs/MPC8349EMDS_PCI64_defconfig @@ -0,0 +1,108 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 +CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8349EMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_64BIT_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2400000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=6 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +# CONFIG_MMC is not set +CONFIG_MTD_NOR_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_TSEC_ENET=y +# CONFIG_PCI is not set +CONFIG_SYS_NS16550=y +CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349EMDS_SDRAM_defconfig b/configs/MPC8349EMDS_SDRAM_defconfig new file mode 100644 index 0000000000..936458a441 --- /dev/null +++ b/configs/MPC8349EMDS_SDRAM_defconfig @@ -0,0 +1,117 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 +CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8349EMDS_SDRAM=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2400000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="SDRAM" +CONFIG_LBLAW2_LENGTH_64_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="SDRAM" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_PORTSIZE_32BIT=y +CONFIG_BR2_MACHINE_SDRAM=y +CONFIG_OR2_COLS_9=y +CONFIG_OR2_ROWS_13=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_PCI_ONE_PCI1=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=6 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +# CONFIG_MMC is not set +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_PHY_MARVELL=y +CONFIG_NETDEVICES=y +CONFIG_TSEC_ENET=y +# CONFIG_PCI is not set +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_MPC8XXX_SPI=y +CONFIG_OF_LIBFDT=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349EMDS_SLAVE_defconfig b/configs/MPC8349EMDS_SLAVE_defconfig new file mode 100644 index 0000000000..9649967bf0 --- /dev/null +++ b/configs/MPC8349EMDS_SLAVE_defconfig @@ -0,0 +1,108 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666666 +CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_MPC8349EMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_64BIT_MODE_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2400000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y +CONFIG_PCI_ONE_PCI1=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE" +CONFIG_BOOTDELAY=6 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +# CONFIG_MMC is not set +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_NETDEVICES=y +CONFIG_TSEC_ENET=y +# CONFIG_PCI is not set +CONFIG_SYS_NS16550=y +CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349EMDS_defconfig b/configs/MPC8349EMDS_defconfig index 41a1d9609b..bb0d166e4d 100644 --- a/configs/MPC8349EMDS_defconfig +++ b/configs/MPC8349EMDS_defconfig @@ -1,7 +1,66 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8349EMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE2400000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y +CONFIG_PCI_ONE_PCI1=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -24,3 +83,29 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MPC8XXX_SPI=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xE2400000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349ITXGP_defconfig b/configs/MPC8349ITXGP_defconfig index 95d807bac0..eddb72b1e0 100644 --- a/configs/MPC8349ITXGP_defconfig +++ b/configs/MPC8349ITXGP_defconfig @@ -1,9 +1,111 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8349ITX=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="PCI2_MEM" +CONFIG_BAT3_BASE=0xA0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="PCI2_MMIO" +CONFIG_BAT4_BASE=0xB0000000 +CONFIG_BAT4_LENGTH_256_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_INHIBITED=y +CONFIG_BAT4_ICACHE_GUARDED=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="VSC7385" +CONFIG_LBLAW1_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF0000000 +CONFIG_LBLAW3_NAME="CF" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFE000000" CONFIG_BOOTDELAY=6 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitxgp:eth0:off console=ttyS0,115200" @@ -29,3 +131,52 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349ITX_LOWBOOT_defconfig b/configs/MPC8349ITX_LOWBOOT_defconfig index 5166723548..b394da3a05 100644 --- a/configs/MPC8349ITX_LOWBOOT_defconfig +++ b/configs/MPC8349ITX_LOWBOOT_defconfig @@ -1,10 +1,110 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8349ITX=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="PCI2_MEM" +CONFIG_BAT3_BASE=0xA0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="PCI2_MMIO" +CONFIG_BAT4_BASE=0xB0000000 +CONFIG_BAT4_LENGTH_256_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_INHIBITED=y +CONFIG_BAT4_ICACHE_GUARDED=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="VSC7385" +CONFIG_LBLAW1_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF0000000 +CONFIG_LBLAW3_NAME="CF" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" CONFIG_BOOTDELAY=6 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200" @@ -39,3 +139,52 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC8349ITX_defconfig b/configs/MPC8349ITX_defconfig index 55e593c115..274fbddf99 100644 --- a/configs/MPC8349ITX_defconfig +++ b/configs/MPC8349ITX_defconfig @@ -1,10 +1,109 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFEF00000 +CONFIG_SYS_CLK_FREQ=66666666 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8349ITX=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="PCI2_MEM" +CONFIG_BAT3_BASE=0xA0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="PCI2_MMIO" +CONFIG_BAT4_BASE=0xB0000000 +CONFIG_BAT4_LENGTH_256_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_INHIBITED=y +CONFIG_BAT4_ICACHE_GUARDED=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="STACK_IN_DCACHE" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_16_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="VSC7385" +CONFIG_LBLAW1_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xF0000000 +CONFIG_LBLAW3_NAME="CF" +CONFIG_LBLAW3_LENGTH_64_KBYTES=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSEC1EP_3=y +CONFIG_SPCR_TSEC2EP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="MPC8349ITX" CONFIG_BOOTDELAY=6 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="root=/dev/nfs rw nfsroot=:/nfsroot/rootfs ip=::::mpc8349emitx:eth0:off console=ttyS0,115200" @@ -39,3 +138,52 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_16_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="VSC7385" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="LED" +CONFIG_BR2_OR2_BASE=0xF9000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_2_MBYTES=y +CONFIG_OR2_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_9=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CF" +CONFIG_BR3_OR3_BASE=0xF0000000 +CONFIG_BR3_MACHINE_UPMA=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BI_BURSTINHIBIT=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/MPC837XEMDS_HOST_defconfig b/configs/MPC837XEMDS_HOST_defconfig index 4ac95735b2..6e6fc54d51 100644 --- a/configs/MPC837XEMDS_HOST_defconfig +++ b/configs/MPC837XEMDS_HOST_defconfig @@ -1,7 +1,112 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC837XEMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_6_1=y +CONFIG_CORE_PLL_RATIO_15_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="IMMR" +CONFIG_BAT2_BASE=0xE0000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="BCSR" +CONFIG_BAT3_BASE=0xF8000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_INHIBITED=y +CONFIG_BAT3_ICACHE_GUARDED=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="FLASH" +CONFIG_BAT4_BASE=0xFE000000 +CONFIG_BAT4_LENGTH_32_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI_MEM" +CONFIG_BAT6_BASE=0x80000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="PCI_MMIO" +CONFIG_BAT7_BASE=0x90000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xE0600000 +CONFIG_LBLAW3_NAME="NAND" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -32,3 +137,46 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/MPC837XEMDS_SLAVE_defconfig b/configs/MPC837XEMDS_SLAVE_defconfig new file mode 100644 index 0000000000..421e176226 --- /dev/null +++ b/configs/MPC837XEMDS_SLAVE_defconfig @@ -0,0 +1,135 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 +CONFIG_MPC83xx=y +CONFIG_TARGET_MPC837XEMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_6_1=y +CONFIG_CORE_PLL_RATIO_15_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="IMMR" +CONFIG_BAT2_BASE=0xE0000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="BCSR" +CONFIG_BAT3_BASE=0xF8000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_INHIBITED=y +CONFIG_BAT3_ICACHE_GUARDED=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xE0600000 +CONFIG_LBLAW3_NAME="NAND" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE" +CONFIG_BOOTDELAY=6 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_TSEC_ENET=y +# CONFIG_PCI is not set +CONFIG_SYS_NS16550=y +CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/MPC837XEMDS_defconfig b/configs/MPC837XEMDS_defconfig index 9ee8c7d880..cd03f3ff9e 100644 --- a/configs/MPC837XEMDS_defconfig +++ b/configs/MPC837XEMDS_defconfig @@ -1,7 +1,92 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC837XEMDS=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_6_1=y +CONFIG_CORE_PLL_RATIO_15_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="IMMR" +CONFIG_BAT2_BASE=0xE0000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="BCSR" +CONFIG_BAT3_BASE=0xF8000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_INHIBITED=y +CONFIG_BAT3_ICACHE_GUARDED=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="FLASH" +CONFIG_BAT4_BASE=0xFE000000 +CONFIG_BAT4_LENGTH_32_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACK_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF8000000 +CONFIG_LBLAW1_NAME="BCSR" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xE0600000 +CONFIG_LBLAW3_NAME="NAND" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -28,3 +113,46 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="BCSR" +CONFIG_BR1_OR1_BASE=0xF8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="NAND" +CONFIG_BR3_OR3_BASE=0xE0600000 +CONFIG_BR3_ERRORCHECKING_BOTH=y +CONFIG_BR3_MACHINE_FCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_BCTLD_NOT_ASSERTED=y +CONFIG_OR3_RST_ONE_CLOCK=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_CHT_TWO_CLOCK=y +CONFIG_OR3_CST_ONE_CLOCK=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/MPC837XERDB_SLAVE_defconfig b/configs/MPC837XERDB_SLAVE_defconfig new file mode 100644 index 0000000000..c90ebc8d7e --- /dev/null +++ b/configs/MPC837XERDB_SLAVE_defconfig @@ -0,0 +1,136 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666667 +CONFIG_MPC83xx=y +CONFIG_TARGET_MPC837XERDB=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_5_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="IMMR" +CONFIG_BAT2_BASE=0xE0000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="L2_SWITCH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_INHIBITED=y +CONFIG_BAT3_ICACHE_GUARDED=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="PCISLAVE,PCIE" +CONFIG_BOOTDELAY=6 +CONFIG_HUSH_PARSER=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SATA=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_DATE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_FSL_SATA=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_TSEC_ENET=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/MPC837XERDB_defconfig b/configs/MPC837XERDB_defconfig index 45b68e9092..95f4796281 100644 --- a/configs/MPC837XERDB_defconfig +++ b/configs/MPC837XERDB_defconfig @@ -1,9 +1,115 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=66666667 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC837XERDB=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_5_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="IMMR" +CONFIG_BAT2_BASE=0xE0000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="L2_SWITCH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_INHIBITED=y +CONFIG_BAT3_ICACHE_GUARDED=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="FLASH" +CONFIG_BAT4_BASE=0xFE000000 +CONFIG_BAT4_LENGTH_32_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_DCACHE_INHIBITED=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="STACH_IN_DCACHE" +CONFIG_BAT5_BASE=0xE6000000 +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="PCI_MEM" +CONFIG_BAT6_BASE=0x80000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="PCI_MMIO" +CONFIG_BAT7_BASE=0x90000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xF0000000 +CONFIG_LBLAW2_NAME="VSC7385" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="PCIE" CONFIG_BOOTDELAY=6 CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y @@ -33,3 +139,41 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_9=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_EHTR_1_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_1=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="VSC7385" +CONFIG_BR2_OR2_BASE=0xF0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_15=y +CONFIG_OR2_SETA_EXTERNAL=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/MPC8610HPCD_defconfig b/configs/MPC8610HPCD_defconfig index cfdfa9011f..80ea441aa3 100644 --- a/configs/MPC8610HPCD_defconfig +++ b/configs/MPC8610HPCD_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xfff00000 CONFIG_MPC86xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8610HPCD=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y diff --git a/configs/MPC8641HPCN_36BIT_defconfig b/configs/MPC8641HPCN_36BIT_defconfig index 4b924c08b3..81901f7a28 100644 --- a/configs/MPC8641HPCN_36BIT_defconfig +++ b/configs/MPC8641HPCN_36BIT_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xeff00000 CONFIG_MPC86xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8641HPCN=y CONFIG_PHYS_64BIT=y CONFIG_OF_BOARD_SETUP=y diff --git a/configs/MPC8641HPCN_defconfig b/configs/MPC8641HPCN_defconfig index 52fba9750d..497d398c83 100644 --- a/configs/MPC8641HPCN_defconfig +++ b/configs/MPC8641HPCN_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xeff00000 CONFIG_MPC86xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_MPC8641HPCN=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y diff --git a/configs/TQM834x_defconfig b/configs/TQM834x_defconfig index e1a7a06306..9d9f105f75 100644 --- a/configs/TQM834x_defconfig +++ b/configs/TQM834x_defconfig @@ -1,7 +1,110 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0x80000000 +CONFIG_SYS_CLK_FREQ=66666000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_TQM834X=y +CONFIG_SYS_IMMR=0xff400000 +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="SDRAM_UPPER" +CONFIG_BAT1_BASE=0x10000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="STACK_IN_DCACHE" +CONFIG_BAT2_BASE=0x20000000 +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="PCI_MEM_BASE" +CONFIG_BAT3_BASE=0x90000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="PCI_MMIO" +CONFIG_BAT4_BASE=0xA0000000 +CONFIG_BAT4_LENGTH_256_MBYTES=y +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_ICACHE_GUARDED=y +CONFIG_BAT4_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT4_DCACHE_GUARDED=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="PCI_IO" +CONFIG_BAT5_BASE=0xE2000000 +CONFIG_BAT5_LENGTH_16_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="IMMR" +CONFIG_BAT6_BASE=0xFF400000 +CONFIG_BAT6_LENGTH_1_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_INHIBITED=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="FLASH" +CONFIG_BAT7_BASE=0x80000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0x80000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_1_GBYTES=y +CONFIG_LBLAW1=y +# CONFIG_LBLAW1_ENABLE is not set +CONFIG_LBLAW2=y +# CONFIG_LBLAW2_ENABLE is not set +CONFIG_LBLAW3=y +# CONFIG_LBLAW3_ENABLE is not set +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -34,3 +137,15 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0x80000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_32BIT=y +CONFIG_OR0_AM_1_GBYTES=y +CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_8=y diff --git a/configs/caddy2_defconfig b/configs/caddy2_defconfig index 5fec4f8d49..192c3442ce 100644 --- a/configs/caddy2_defconfig +++ b/configs/caddy2_defconfig @@ -1,10 +1,81 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFFF00000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_VME8349=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_CADDY2=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="UNKNOWN" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFFC00000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_4_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF0000000 +CONFIG_LBLAW1_NAME="WINDOW1" +CONFIG_LBLAW1_LENGTH_256_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="CADDY2" CONFIG_BOOTDELAY=6 CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y @@ -24,3 +95,24 @@ CONFIG_E1000=y CONFIG_BAUDRATE=9600 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFFC00000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_4_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="WINDOW1" +CONFIG_BR1_OR1_BASE=0xF0000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_32BIT=y +CONFIG_OR1_AM_256_KBYTES=y +CONFIG_OR1_SETA_EXTERNAL=y diff --git a/configs/gazerbeam_defconfig b/configs/gazerbeam_defconfig new file mode 100644 index 0000000000..346b1b2eaa --- /dev/null +++ b/configs/gazerbeam_defconfig @@ -0,0 +1,196 @@ +CONFIG_PPC=y +CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_MALLOC_F_LEN=0x600 +CONFIG_IDENT_STRING=" gazerbeam 0.01" +CONFIG_SYS_CLK_FREQ=33333333 +CONFIG_MPC83xx=y +CONFIG_TARGET_GAZERBEAM=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="INIT_RAM" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xE0700000 +CONFIG_LBLAW2_NAME="FPGA1" +CONFIG_LBLAW2_LENGTH_1_MBYTES=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA0" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="FPGA1" +CONFIG_BR2_OR2_BASE=0xE0700000 +CONFIG_BR2_PORTSIZE_16BIT=y +CONFIG_OR2_AM_1_MBYTES=y +CONFIG_OR2_SCY_5=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y +CONFIG_SICR_GPIO_A_TSEC2=y +CONFIG_SICR_GPIO_B_TSEC_GTX_CLK125=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y +CONFIG_SYS_FPGA_FLAVOR_GAZERBEAM=y +CONFIG_CMD_IOLOOP=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=5 +# CONFIG_CONSOLE_MUX is not set +CONFIG_SYS_CONSOLE_INFO_QUIET=y +CONFIG_DISPLAY_CPUINFO=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_HUSH_PARSER=y +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_CMD_CPU=y +CONFIG_CMD_BINOP=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_AXI=y +# CONFIG_CMD_SETEXPR is not set +# CONFIG_CMD_NFS is not set +CONFIG_CMD_MII=y +CONFIG_CMD_MII_DRIVER=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_HASH=y +CONFIG_CMD_TPM=y +CONFIG_CMD_EXT2=y +CONFIG_DOS_PARTITION=y +CONFIG_OF_CONTROL=y +CONFIG_OF_LIVE=y +CONFIG_DEFAULT_DEVICE_TREE="gazerbeam" +CONFIG_DM=y +CONFIG_REGMAP=y +CONFIG_AXI=y +CONFIG_IHS_AXI=y +CONFIG_CLK=y +CONFIG_ICS8N3QV01=y +CONFIG_CPU=y +CONFIG_CPU_MPC83XX=y +CONFIG_BOARD=y +CONFIG_BOARD_GAZERBEAM=y +CONFIG_DM_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_MPC8XXX_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_FSL=y +CONFIG_SYS_I2C_IHS=y +CONFIG_MISC=y +CONFIG_GDSYS_RXAUI_CTRL=y +CONFIG_GDSYS_IOEP=y +CONFIG_MPC83XX_SERDES=y +CONFIG_GDSYS_SOC=y +CONFIG_IHS_FPGA=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_CFI_FLASH=y +CONFIG_SYS_FLASH_PROTECTION=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_PHYLIB_10G=y +CONFIG_PHY_MARVELL=y +CONFIG_DM_ETH=y +CONFIG_TSEC_ENET=y +# CONFIG_PCI is not set +CONFIG_RAM=y +CONFIG_MPC83XX_SDRAM=y +CONFIG_DM_RESET=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_MCP83XX=y +CONFIG_TIMER=y +CONFIG_MPC83XX_TIMER=y +CONFIG_TPM_ATMEL_TWI=y +CONFIG_TPM_AUTH_SESSIONS=y +# CONFIG_TPM_V2 is not set +CONFIG_DM_VIDEO=y +CONFIG_DISPLAY=y +CONFIG_LOGICORE_DP_TX=y +CONFIG_OSD=y +CONFIG_IHS_VIDEO_OUT=y +CONFIG_TPM=y diff --git a/configs/hrcon_defconfig b/configs/hrcon_defconfig index 7605c56619..bc4c2a91fb 100644 --- a/configs/hrcon_defconfig +++ b/configs/hrcon_defconfig @@ -1,8 +1,75 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" hrcon 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -38,3 +105,31 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/hrcon_dh_defconfig b/configs/hrcon_dh_defconfig index bc51a5d02a..af93aef1be 100644 --- a/configs/hrcon_dh_defconfig +++ b/configs/hrcon_dh_defconfig @@ -1,8 +1,75 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" hrcon dh 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_HRCON=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_RGMII=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC_GTX_CLK125=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -36,3 +103,31 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_15=y +CONFIG_OR1_XACS_EXTENDED=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/ids8313_defconfig b/configs/ids8313_defconfig index 0d055e395d..d9b1642671 100644 --- a/configs/ids8313_defconfig +++ b/configs/ids8313_defconfig @@ -1,7 +1,81 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFFF00000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_IDS8313=y +CONFIG_SYS_IMMR=0xF0000000 +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_8BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="INITRAM" +CONFIG_BAT1_BASE=0xFD000000 +CONFIG_BAT1_LENGTH_256_KBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFF800000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR" +CONFIG_BAT5_BASE=0xF0000000 +CONFIG_BAT5_LENGTH_128_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="NAND_MRAM_CPLD" +CONFIG_BAT6_BASE=0xE0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_NAND_LBLAWBAR_PRELIM_1=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFF800000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE1000000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xE2000000 +CONFIG_LBLAW2_NAME="MRAM" +CONFIG_LBLAW2_LENGTH_128_KBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xE3000000 +CONFIG_LBLAW3_NAME="CPLD" +CONFIG_LBLAW3_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_FIT=y CONFIG_FIT_SIGNATURE=y CONFIG_IMAGE_FORMAT_LEGACY=y @@ -51,3 +125,50 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MPC8XXX_SPI=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_8BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_10=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0xE1000000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_PGS_LARGE=y +CONFIG_OR1_RST_ONE_CLOCK=y +CONFIG_OR1_SCY_4=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_OR1_CSCT_8_CYCLE=y +CONFIG_OR1_CST_ONE_CLOCK=y +CONFIG_OR1_EHTR_8_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="MRAM" +CONFIG_BR2_OR2_BASE=0xE2000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_SCY_7=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="CPLD" +CONFIG_BR3_OR3_BASE=0xE3000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_32_KBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_1=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/kmcoge5ne_defconfig b/configs/kmcoge5ne_defconfig index cb47b0b7fd..941efcdf9a 100644 --- a/configs/kmcoge5ne_defconfig +++ b/configs/kmcoge5ne_defconfig @@ -1,10 +1,118 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_KM8360=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMCOGE5NE=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_VCO_DIV_4=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_6=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_LALE_TIMING_EARLIER=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM_LOWER" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="PAXE" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="BFTIC3" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="SDRAM_UPPER" +CONFIG_BAT7_BASE=0x10000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_INHIBITED=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_INHIBITED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xA0000000 +CONFIG_LBLAW3_NAME="PAXE" +CONFIG_LBLAW3_LENGTH_512_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMCOGE5NE" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -42,3 +150,48 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_64_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PAXE" +CONFIG_BR3_OR3_BASE=0xA0000000 +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_ELBC_BR4_OR4=y +CONFIG_BR4_OR4_NAME="BFTIC3" +CONFIG_BR4_OR4_BASE=0xB0000000 +CONFIG_BR4_PORTSIZE_8BIT=y +CONFIG_OR4_AM_256_MBYTES=y +CONFIG_OR4_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR4_CSNT_EARLIER=y +CONFIG_OR4_EAD_EXTRA=y +CONFIG_OR4_SCY_2=y +CONFIG_OR4_TRLX_RELAXED=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y +CONFIG_LCRR_EADC_2=y diff --git a/configs/kmeter1_defconfig b/configs/kmeter1_defconfig index 0c3fadfcf8..4929a6039b 100644 --- a/configs/kmeter1_defconfig +++ b/configs/kmeter1_defconfig @@ -1,10 +1,91 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_KM8360=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMETER1=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_VCO_DIV_4=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_6=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_LALE_TIMING_EARLIER=y +CONFIG_LDP_PIN_MUX_STATE_0=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="PAXE" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xA0000000 +CONFIG_LBLAW3_NAME="PAXE" +CONFIG_LBLAW3_LENGTH_512_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMETER1" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +122,38 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_64_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="PAXE" +CONFIG_BR3_OR3_BASE=0xA0000000 +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y +CONFIG_LCRR_EADC_2=y diff --git a/configs/kmopti2_defconfig b/configs/kmopti2_defconfig index e8e821fb80..afe424b8df 100644 --- a/configs/kmopti2_defconfig +++ b/configs/kmopti2_defconfig @@ -1,10 +1,106 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_TUXX1=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMOPTI2=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMOPTI2" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +137,48 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_4=y +CONFIG_OR3_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/kmsupx5_defconfig b/configs/kmsupx5_defconfig index 86e2bd9237..1a78680bd0 100644 --- a/configs/kmsupx5_defconfig +++ b/configs/kmsupx5_defconfig @@ -1,10 +1,92 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_TUXX1=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMSUPX5=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMSUPX5" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +123,40 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/kmtegr1_defconfig b/configs/kmtegr1_defconfig index 40181758e9..d874149fe3 100644 --- a/configs/kmtegr1_defconfig +++ b/configs/kmtegr1_defconfig @@ -1,7 +1,91 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_SUVD3=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMTEGR1=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1" @@ -43,3 +127,36 @@ CONFIG_SYS_FLASH_CFI=y CONFIG_SYS_NS16550=y CONFIG_BCH=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_5=y +CONFIG_OR3_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/kmtepr2_defconfig b/configs/kmtepr2_defconfig index 6170dc3f16..32d098028a 100644 --- a/configs/kmtepr2_defconfig +++ b/configs/kmtepr2_defconfig @@ -1,10 +1,106 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_TUXX1=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMTEPR2=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMTEPR2" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +137,48 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_SCY_4=y +CONFIG_OR3_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig index 74b688fb5f..26d9a7cf7a 100644 --- a/configs/kmvect1_defconfig +++ b/configs/kmvect1_defconfig @@ -1,7 +1,105 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_SUVD3=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_KMVECT1=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="KMVECT1" @@ -42,3 +140,43 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_UPMA=y +CONFIG_BR2_PORTSIZE_16BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_3=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/mpc8308_p1m_defconfig b/configs/mpc8308_p1m_defconfig index 114ffeeddb..0789ecd586 100644 --- a/configs/mpc8308_p1m_defconfig +++ b/configs/mpc8308_p1m_defconfig @@ -1,7 +1,76 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFC000000 +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_MPC8308_P1M=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFC000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACKINDCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFC000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_64_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xFBFF0000 +CONFIG_LBLAW1_NAME="SJA1000" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xFBFF8000 +CONFIG_LBLAW2_NAME="CPLD" +CONFIG_LBLAW2_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ESDHC_A_GPIO=y +CONFIG_SICR_ESDHC_B_GPIO=y +CONFIG_SICR_ESDHC_C_GTM=y +CONFIG_SICR_GPIO_A_TSEC2=y +CONFIG_SICR_GPIO_B_TSEC2=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=5 @@ -24,3 +93,34 @@ CONFIG_MII=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFC000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_64_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_4=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="SJA1000" +CONFIG_BR1_OR1_BASE=0xFBFF0000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_EHTR_1_CYCLE=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="CPLD" +CONFIG_BR2_OR2_BASE=0xFBFF8000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_32_KBYTES=y +CONFIG_OR2_SCY_4=y +CONFIG_OR2_EHTR_1_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/sbc8349_PCI_33_defconfig b/configs/sbc8349_PCI_33_defconfig index 02d5185124..a363070dd8 100644 --- a/configs/sbc8349_PCI_33_defconfig +++ b/configs/sbc8349_PCI_33_defconfig @@ -1,7 +1,78 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFF800000 +CONFIG_SYS_CLK_FREQ=33000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_SBC8349=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_8_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_64BIT_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFF800000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_PCI_64BIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCI_33M" @@ -21,3 +92,19 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/sbc8349_PCI_66_defconfig b/configs/sbc8349_PCI_66_defconfig index 945c5229b9..215f31df28 100644 --- a/configs/sbc8349_PCI_66_defconfig +++ b/configs/sbc8349_PCI_66_defconfig @@ -1,7 +1,78 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFF800000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_SBC8349=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_64BIT_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFF800000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_PCI_64BIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="PCI_66M" @@ -21,3 +92,19 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/sbc8349_defconfig b/configs/sbc8349_defconfig index 82379e67d2..d492b861d5 100644 --- a/configs/sbc8349_defconfig +++ b/configs/sbc8349_defconfig @@ -1,7 +1,57 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFF800000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_SBC8349=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_PCI_INT_ARBITER2_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="LBC_INITRAM_FLASH" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFF800000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -20,3 +70,19 @@ CONFIG_TSEC_ENET=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFF800000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/sbc8641d_defconfig b/configs/sbc8641d_defconfig index d1ffea5afb..47cec18a95 100644 --- a/configs/sbc8641d_defconfig +++ b/configs/sbc8641d_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xfff00000 CONFIG_MPC86xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_SBC8641D=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y diff --git a/configs/strider_con_defconfig b/configs/strider_con_defconfig index 24c793dfc5..9f05b5693f 100644 --- a/configs/strider_con_defconfig +++ b/configs/strider_con_defconfig @@ -1,8 +1,74 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" strider con 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC2=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -41,3 +107,28 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/strider_con_dp_defconfig b/configs/strider_con_dp_defconfig index c70d99a7e6..a1f9662518 100644 --- a/configs/strider_con_dp_defconfig +++ b/configs/strider_con_dp_defconfig @@ -1,8 +1,74 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" strider con dp 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC2=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -41,3 +107,28 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/strider_cpu_defconfig b/configs/strider_cpu_defconfig index fef58848af..2477ee5ca4 100644 --- a/configs/strider_cpu_defconfig +++ b/configs/strider_cpu_defconfig @@ -1,8 +1,74 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" strider cpu 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC2=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -41,3 +107,28 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/strider_cpu_dp_defconfig b/configs/strider_cpu_dp_defconfig index fc8f39eb54..da16d5dbfa 100644 --- a/configs/strider_cpu_dp_defconfig +++ b/configs/strider_cpu_dp_defconfig @@ -1,8 +1,74 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 CONFIG_IDENT_STRING=" strider cpu dp 0.01" +CONFIG_SYS_CLK_FREQ=33333333 CONFIG_MPC83xx=y CONFIG_TARGET_STRIDER=y +CONFIG_SYSTEM_PLL_VCO_DIV_2=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_3_1=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC2_MODE_RGMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="DDR" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_128_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMRBAR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_8_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="FLASH" +CONFIG_BAT2_BASE=0xFE000000 +CONFIG_BAT2_LENGTH_8_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="STACK_IN_DCACHE" +CONFIG_BAT3_BASE=0xE6000000 +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_8_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE0600000 +CONFIG_LBLAW1_NAME="FPGA0" +CONFIG_LBLAW1_LENGTH_1_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_DPM=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_SICR_ETSEC1_A_TSEC2=y +CONFIG_SICR_GPIO_A_GPIO=y +CONFIG_SICR_GPIO_B_GPIO=y +CONFIG_SICR_IEEE1588_A_GPIO=y +CONFIG_SICR_GTM_GPIO=y +CONFIG_SICR_ETSEC2_GPIO=y +CONFIG_SICR_GPIOSEL_IEEE1588=y +CONFIG_SICR_TMSOBI1_2_5_V=y +CONFIG_SICR_TMSOBI2_2_5_V=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_SPCR_TSECEP_3=y CONFIG_CMD_IOLOOP=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -41,3 +107,28 @@ CONFIG_TSEC_ENET=y CONFIG_CONS_INDEX=2 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_8_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="FPGA" +CONFIG_BR1_OR1_BASE=0xE0600000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_16BIT=y +CONFIG_OR1_AM_1_MBYTES=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_SCY_5=y +CONFIG_OR1_XAM_SET=y +CONFIG_OR1_EHTR_NORMAL=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/suvd3_defconfig b/configs/suvd3_defconfig index e6b97b866d..c970cde05e 100644 --- a/configs/suvd3_defconfig +++ b/configs/suvd3_defconfig @@ -1,7 +1,104 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_SUVD3=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SUVD3" @@ -41,3 +138,43 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_UPMA=y +CONFIG_BR2_PORTSIZE_16BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_3=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/tuge1_defconfig b/configs/tuge1_defconfig index e5826719b9..550f524a3c 100644 --- a/configs/tuge1_defconfig +++ b/configs/tuge1_defconfig @@ -1,10 +1,92 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y -CONFIG_TARGET_TUXX1=y +CONFIG_HIGH_BATS=y +CONFIG_TARGET_TUGE1=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="TUGE1" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +123,40 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/tuxx1_defconfig b/configs/tuxx1_defconfig index 204d3e4f68..d5ec8e5bf2 100644 --- a/configs/tuxx1_defconfig +++ b/configs/tuxx1_defconfig @@ -1,10 +1,106 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xF0000000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_TUXX1=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_QUICC_MULT_FACTOR_3=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_INHIBITED=y +CONFIG_BAT0_ICACHE_GUARDED=y +CONFIG_BAT0_DCACHE_INHIBITED=y +CONFIG_BAT0_DCACHE_GUARDED=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="IMMR" +CONFIG_BAT1_BASE=0xE0000000 +CONFIG_BAT1_LENGTH_4_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_INHIBITED=y +CONFIG_BAT1_ICACHE_GUARDED=y +CONFIG_BAT1_DCACHE_INHIBITED=y +CONFIG_BAT1_DCACHE_GUARDED=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="KMBEC_FPGA" +CONFIG_BAT2_BASE=0xE8000000 +CONFIG_BAT2_LENGTH_128_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT3=y +CONFIG_BAT3_NAME="FLASH" +CONFIG_BAT3_BASE=0xF0000000 +CONFIG_BAT3_LENGTH_256_MBYTES=y +CONFIG_BAT3_ACCESS_RW=y +CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT3_DCACHE_INHIBITED=y +CONFIG_BAT3_DCACHE_GUARDED=y +CONFIG_BAT3_USER_MODE_VALID=y +CONFIG_BAT3_SUPERVISOR_MODE_VALID=y +CONFIG_BAT4=y +CONFIG_BAT4_NAME="STACK_IN_DCACHE" +CONFIG_BAT4_BASE=0xE6000000 +CONFIG_BAT4_ACCESS_RW=y +CONFIG_BAT4_USER_MODE_VALID=y +CONFIG_BAT4_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="APP1" +CONFIG_BAT5_BASE=0xA0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="APP2" +CONFIG_BAT6_BASE=0xB0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_INHIBITED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF0000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_256_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xE8000000 +CONFIG_LBLAW1_NAME="KMBEC_FPGA" +CONFIG_LBLAW1_LENGTH_128_MBYTES=y +CONFIG_LBLAW2=y +CONFIG_LBLAW2_BASE=0xA0000000 +CONFIG_LBLAW2_NAME="APP1" +CONFIG_LBLAW2_LENGTH_256_MBYTES=y +CONFIG_LBLAW3=y +CONFIG_LBLAW3_BASE=0xB0000000 +CONFIG_LBLAW3_NAME="APP2" +CONFIG_LBLAW3_LENGTH_256_MBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y +CONFIG_ACR_APARK_MASTER=y +CONFIG_ACR_PARKM_USB_I2C1_BOOT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="TUXX1" CONFIG_MISC_INIT_R=y CONFIG_VERSION_VARIABLE=y CONFIG_BOARD_EARLY_INIT_R=y @@ -41,3 +137,51 @@ CONFIG_SYS_FLASH_CFI=y # CONFIG_PCI is not set CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF0000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_256_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="KMBEC_FPGA" +CONFIG_BR1_OR1_BASE=0xE8000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_128_MBYTES=y +CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR1_CSNT_EARLIER=y +CONFIG_OR1_EAD_EXTRA=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="APP1" +CONFIG_BR2_OR2_BASE=0xA0000000 +CONFIG_BR2_MACHINE_GPCM=y +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_256_MBYTES=y +CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_2=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_4_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="APP2" +CONFIG_BR3_OR3_BASE=0xB0000000 +CONFIG_BR3_MACHINE_GPCM=y +CONFIG_BR3_PORTSIZE_8BIT=y +CONFIG_OR3_AM_256_MBYTES=y +CONFIG_OR3_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_SCY_2=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_4_CYCLE=y +CONFIG_LCRR_DBYP_PLL_BYPASSED=y +CONFIG_LCRR_EADC_1=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/ve8313_defconfig b/configs/ve8313_defconfig index 584aafb08f..0a9521b251 100644 --- a/configs/ve8313_defconfig +++ b/configs/ve8313_defconfig @@ -1,7 +1,84 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFE000000 +CONFIG_SYS_CLK_FREQ=32000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_VE8313=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_25_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_LALE_TIMING_EARLIER=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO_BCSR" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="INITRAM_FLASH" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_GUARDED=y +CONFIG_BAT6_DCACHE_GUARDED=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_BAT7=y +CONFIG_BAT7_NAME="FPGA_SRAM_NAND" +CONFIG_BAT7_BASE=0x60000000 +CONFIG_BAT7_LENGTH_256_MBYTES=y +CONFIG_BAT7_ACCESS_RW=y +CONFIG_BAT7_ICACHE_GUARDED=y +CONFIG_BAT7_DCACHE_GUARDED=y +CONFIG_BAT7_USER_MODE_VALID=y +CONFIG_BAT7_SUPERVISOR_MODE_VALID=y +CONFIG_NAND_LBLAWBAR_PRELIM_1=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xFE000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_32_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0x61000000 +CONFIG_LBLAW1_NAME="NAND" +CONFIG_LBLAW1_LENGTH_32_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_ACR_PIPE_DEP_4=y +CONFIG_ACR_RPTCNT_4=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -23,3 +100,50 @@ CONFIG_PHY_MARVELL=y CONFIG_TSEC_ENET=y CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xFE000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_32_MBYTES=y +CONFIG_OR0_ACS_QUARTER_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_5=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="NAND" +CONFIG_BR1_OR1_BASE=0x61000000 +CONFIG_BR1_ERRORCHECKING_BOTH=y +CONFIG_BR1_MACHINE_FCM=y +CONFIG_BR1_PORTSIZE_8BIT=y +CONFIG_OR1_AM_32_KBYTES=y +CONFIG_OR1_BCTLD_NOT_ASSERTED=y +CONFIG_OR1_RST_ONE_CLOCK=y +CONFIG_OR1_SCY_2=y +CONFIG_OR1_TRLX_RELAXED=y +CONFIG_OR1_CHT_TWO_CLOCK=y +CONFIG_ELBC_BR2_OR2=y +CONFIG_BR2_OR2_NAME="NVRAM" +CONFIG_BR2_OR2_BASE=0x60000000 +CONFIG_BR2_PORTSIZE_8BIT=y +CONFIG_OR2_AM_128_KBYTES=y +CONFIG_OR2_CSNT_EARLIER=y +CONFIG_OR2_EAD_EXTRA=y +CONFIG_OR2_SCY_3=y +CONFIG_OR2_XACS_EXTENDED=y +CONFIG_OR2_TRLX_RELAXED=y +CONFIG_OR2_EHTR_8_CYCLE=y +CONFIG_ELBC_BR3_OR3=y +CONFIG_BR3_OR3_NAME="SRAM" +CONFIG_BR3_OR3_BASE=0x62000000 +CONFIG_BR3_PORTSIZE_16BIT=y +CONFIG_OR3_AM_32_MBYTES=y +CONFIG_OR3_CSNT_EARLIER=y +CONFIG_OR3_EAD_EXTRA=y +CONFIG_OR3_SCY_15=y +CONFIG_OR3_XACS_EXTENDED=y +CONFIG_OR3_TRLX_RELAXED=y +CONFIG_OR3_EHTR_8_CYCLE=y +CONFIG_LCRR_EADC_3=y +CONFIG_LCRR_CLKDIV_2=y diff --git a/configs/vme8349_defconfig b/configs/vme8349_defconfig index a7d81a3a0f..24bbba1aa7 100644 --- a/configs/vme8349_defconfig +++ b/configs/vme8349_defconfig @@ -1,7 +1,80 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xFFF00000 +CONFIG_SYS_CLK_FREQ=66000000 CONFIG_MPC83xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_VME8349=y +CONFIG_DDR_MC_CLOCK_MODE_1_1=y +CONFIG_SYSTEM_PLL_FACTOR_4_1=y +CONFIG_CORE_PLL_RATIO_2_1=y +CONFIG_PCI_HOST_MODE_ENABLE=y +CONFIG_PCI_64BIT_MODE_ENABLE=y +CONFIG_PCI_INT_ARBITER1_ENABLE=y +CONFIG_BOOT_MEMORY_SPACE_LOW=y +CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y +CONFIG_TSEC1_MODE_GMII=y +CONFIG_TSEC2_MODE_GMII=y +CONFIG_BAT0=y +CONFIG_BAT0_NAME="SDRAM" +CONFIG_BAT0_BASE=0x00000000 +CONFIG_BAT0_LENGTH_256_MBYTES=y +CONFIG_BAT0_ACCESS_RW=y +CONFIG_BAT0_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT0_USER_MODE_VALID=y +CONFIG_BAT0_SUPERVISOR_MODE_VALID=y +CONFIG_BAT1=y +CONFIG_BAT1_NAME="PCI1_MEM" +CONFIG_BAT1_BASE=0x80000000 +CONFIG_BAT1_LENGTH_256_MBYTES=y +CONFIG_BAT1_ACCESS_RW=y +CONFIG_BAT1_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT1_USER_MODE_VALID=y +CONFIG_BAT1_SUPERVISOR_MODE_VALID=y +CONFIG_BAT2=y +CONFIG_BAT2_NAME="PCI1_MMIO" +CONFIG_BAT2_BASE=0x90000000 +CONFIG_BAT2_LENGTH_256_MBYTES=y +CONFIG_BAT2_ACCESS_RW=y +CONFIG_BAT2_ICACHE_INHIBITED=y +CONFIG_BAT2_ICACHE_GUARDED=y +CONFIG_BAT2_DCACHE_INHIBITED=y +CONFIG_BAT2_DCACHE_GUARDED=y +CONFIG_BAT2_USER_MODE_VALID=y +CONFIG_BAT2_SUPERVISOR_MODE_VALID=y +CONFIG_BAT5=y +CONFIG_BAT5_NAME="IMMR_PCIIO" +CONFIG_BAT5_BASE=0xE0000000 +CONFIG_BAT5_LENGTH_256_MBYTES=y +CONFIG_BAT5_ACCESS_RW=y +CONFIG_BAT5_ICACHE_INHIBITED=y +CONFIG_BAT5_ICACHE_GUARDED=y +CONFIG_BAT5_DCACHE_INHIBITED=y +CONFIG_BAT5_DCACHE_GUARDED=y +CONFIG_BAT5_USER_MODE_VALID=y +CONFIG_BAT5_SUPERVISOR_MODE_VALID=y +CONFIG_BAT6=y +CONFIG_BAT6_NAME="UNKNOWN" +CONFIG_BAT6_BASE=0xF0000000 +CONFIG_BAT6_LENGTH_256_MBYTES=y +CONFIG_BAT6_ACCESS_RW=y +CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_DCACHE_MEMORYCOHERENCE=y +CONFIG_BAT6_USER_MODE_VALID=y +CONFIG_BAT6_SUPERVISOR_MODE_VALID=y +CONFIG_LBLAW0=y +CONFIG_LBLAW0_BASE=0xF8000000 +CONFIG_LBLAW0_NAME="FLASH" +CONFIG_LBLAW0_LENGTH_128_MBYTES=y +CONFIG_LBLAW1=y +CONFIG_LBLAW1_BASE=0xF0000000 +CONFIG_LBLAW1_NAME="WINDOW1" +CONFIG_LBLAW1_LENGTH_256_KBYTES=y +CONFIG_HID0_FINAL_EMCP=y +CONFIG_HID0_FINAL_ICE=y +CONFIG_HID2_HBE=y +CONFIG_PCI_64BIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_BOOTDELAY=6 @@ -24,3 +97,25 @@ CONFIG_TSEC_ENET=y CONFIG_BAUDRATE=9600 CONFIG_SYS_NS16550=y CONFIG_OF_LIBFDT=y +CONFIG_ELBC_BR0_OR0=y +CONFIG_BR0_OR0_NAME="FLASH" +CONFIG_BR0_OR0_BASE=0xF8000000 +CONFIG_BR0_MACHINE_GPCM=y +CONFIG_BR0_PORTSIZE_16BIT=y +CONFIG_OR0_AM_128_MBYTES=y +CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y +CONFIG_OR0_CSNT_EARLIER=y +CONFIG_OR0_EAD_EXTRA=y +CONFIG_OR0_SCY_15=y +CONFIG_OR0_XACS_EXTENDED=y +CONFIG_OR0_XAM_SET=y +CONFIG_OR0_TRLX_RELAXED=y +CONFIG_OR0_EHTR_8_CYCLE=y +CONFIG_ELBC_BR1_OR1=y +CONFIG_BR1_OR1_NAME="WINDOW1" +CONFIG_BR1_OR1_BASE=0xF0000000 +CONFIG_BR1_MACHINE_GPCM=y +CONFIG_BR1_PORTSIZE_32BIT=y +CONFIG_OR1_AM_256_KBYTES=y +CONFIG_OR1_SETA_EXTERNAL=y +CONFIG_LCRR_CLKDIV_4=y diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index d2d8313da6..cad95d338e 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -1,6 +1,7 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xfff00000 CONFIG_MPC86xx=y +CONFIG_HIGH_BATS=y CONFIG_TARGET_XPEDITE517X=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y diff --git a/drivers/board/gazerbeam.c b/drivers/board/gazerbeam.c index 481cce8e80..85de4e440c 100644 --- a/drivers/board/gazerbeam.c +++ b/drivers/board/gazerbeam.c @@ -61,7 +61,7 @@ static int _read_board_variant_data(struct udevice *dev) struct udevice *i2c_bus; struct udevice *dummy; char *listname; - int mc4, mc2, sc, con; + int mc4, mc2, sc, mc2_sc, con; int gpio_num; int res; @@ -78,16 +78,16 @@ static int _read_board_variant_data(struct udevice *dev) return -EIO; } - mc2 = !dm_i2c_probe(i2c_bus, MC2_EXPANDER_ADDR, 0, &dummy); + mc2_sc = !dm_i2c_probe(i2c_bus, MC2_EXPANDER_ADDR, 0, &dummy); mc4 = !dm_i2c_probe(i2c_bus, MC4_EXPANDER_ADDR, 0, &dummy); - if (mc2 && mc4) { + if (mc2_sc && mc4) { debug("%s: Board hardware configuration inconsistent.\n", dev->name); return -EINVAL; } - listname = mc2 ? "var-gpios-mc2" : "var-gpios-mc4"; + listname = mc2_sc ? "var-gpios-mc2" : "var-gpios-mc4"; gpio_num = gpio_request_list_by_name(dev, listname, priv->var_gpios, ARRAY_SIZE(priv->var_gpios), @@ -105,12 +105,7 @@ static int _read_board_variant_data(struct udevice *dev) return sc; } - con = dm_gpio_get_value(&priv->var_gpios[CON_GPIO_NO]); - if (con < 0) { - debug("%s: Error while reading 'con' GPIO (err = %d)", - dev->name, con); - return con; - } + mc2 = mc2_sc ? (sc ? 0 : 1) : 0; if ((sc && mc2) || (sc && mc4) || (!sc && !mc2 && !mc4)) { debug("%s: Board hardware configuration inconsistent.\n", @@ -118,6 +113,13 @@ static int _read_board_variant_data(struct udevice *dev) return -EINVAL; } + con = dm_gpio_get_value(&priv->var_gpios[CON_GPIO_NO]); + if (con < 0) { + debug("%s: Error while reading 'con' GPIO (err = %d)", + dev->name, con); + return con; + } + priv->variant = con ? VAR_CON : VAR_CPU; priv->multichannel = mc4 ? 4 : (mc2 ? 2 : (sc ? 1 : 0)); diff --git a/drivers/clk/mpc83xx_clk.c b/drivers/clk/mpc83xx_clk.c index 489004190e..32d2db9eda 100644 --- a/drivers/clk/mpc83xx_clk.c +++ b/drivers/clk/mpc83xx_clk.c @@ -275,6 +275,12 @@ static ulong mpc83xx_clk_get_rate(struct clk *clk) return priv->speed[clk->id]; } +static int mpc83xx_clk_enable(struct clk *clk) +{ + /* MPC83xx clocks are always enabled */ + return 0; +} + int get_clocks(void) { /* Empty implementation to keep the prototype in common.h happy */ @@ -301,6 +307,7 @@ int get_serial_clock(void) const struct clk_ops mpc83xx_clk_ops = { .request = mpc83xx_clk_request, .get_rate = mpc83xx_clk_get_rate, + .enable = mpc83xx_clk_enable, }; static const struct udevice_id mpc83xx_clk_match[] = { diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 6d018fde2b..e1f69a1d25 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -23,8 +23,12 @@ * 0x80_8000_0000 ~ 0xff_ffff_ffff */ #ifndef CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY +#ifdef CONFIG_MPC83xx +#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_SDRAM_BASE +#else #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_DDR_SDRAM_BASE #endif +#endif #ifdef CONFIG_PPC #include <asm/fsl_law.h> diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index 0922fe9bb1..f7b59d36f9 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -8,8 +8,7 @@ #include <i2c.h> #ifdef CONFIG_DM_I2C #include <dm.h> -#include <fpgamap.h> -#include "../misc/gdsys_soc.h" +#include <regmap.h> #else #include <gdsys_fpga.h> #endif @@ -18,18 +17,24 @@ #ifdef CONFIG_DM_I2C struct ihs_i2c_priv { uint speed; - phys_addr_t addr; + struct regmap *map; }; -enum { - REG_INTERRUPT_STATUS = 0x00, - REG_INTERRUPT_ENABLE_CONTROL = 0x02, - REG_WRITE_MAILBOX_EXT = 0x04, - REG_WRITE_MAILBOX = 0x06, - REG_READ_MAILBOX_EXT = 0x08, - REG_READ_MAILBOX = 0x0A, +struct ihs_i2c_regs { + u16 interrupt_status; + u16 interrupt_enable_control; + u16 write_mailbox_ext; + u16 write_mailbox; + u16 read_mailbox_ext; + u16 read_mailbox; }; +#define ihs_i2c_set(map, member, val) \ + regmap_set(map, struct ihs_i2c_regs, member, val) + +#define ihs_i2c_get(map, member, valp) \ + regmap_get(map, struct ihs_i2c_regs, member, valp) + #else /* !CONFIG_DM_I2C */ DECLARE_GLOBAL_DATA_PTR; @@ -92,14 +97,10 @@ static int wait_for_int(bool read) uint ctr = 0; #ifdef CONFIG_DM_I2C struct ihs_i2c_priv *priv = dev_get_priv(dev); - struct udevice *fpga; - - gdsys_soc_get_fpga(dev, &fpga); #endif #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_GET_REG(interrupt_status, &val); #endif @@ -107,17 +108,18 @@ static int wait_for_int(bool read) while (!(val & (I2CINT_ERROR_EV | (read ? I2CINT_RECEIVE_EV : I2CINT_TRANSMIT_EV)))) { udelay(10); - if (ctr++ > 5000) - return 1; + if (ctr++ > 5000) { + debug("%s: timed out\n", __func__); + return -ETIMEDOUT; + } #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_GET_REG(interrupt_status, &val); #endif } - return (val & I2CINT_ERROR_EV) ? 1 : 0; + return (val & I2CINT_ERROR_EV) ? -EIO : 0; } #ifdef CONFIG_DM_I2C @@ -130,20 +132,16 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, { u16 val; u16 data; + int res; #ifdef CONFIG_DM_I2C struct ihs_i2c_priv *priv = dev_get_priv(dev); - struct udevice *fpga; - - gdsys_soc_get_fpga(dev, &fpga); #endif /* Clear interrupt status */ data = I2CINT_ERROR_EV | I2CINT_RECEIVE_EV | I2CINT_TRANSMIT_EV; #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_INTERRUPT_STATUS, &data, - FPGAMAP_SIZE_16); - fpgamap_read(fpga, priv->addr + REG_INTERRUPT_STATUS, &val, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, interrupt_status, data); + ihs_i2c_get(priv->map, interrupt_status, &val); #else I2C_SET_REG(interrupt_status, data); I2C_GET_REG(interrupt_status, &val); @@ -156,8 +154,7 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, if (len > 1) val |= buffer[1] << 8; #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX_EXT, &val, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, write_mailbox_ext, val); #else I2C_SET_REG(write_mailbox_ext, val); #endif @@ -170,24 +167,27 @@ static int ihs_i2c_transfer(uchar chip, uchar *buffer, int len, bool read, | (is_last ? 0 : I2CMB_HOLD_BUS); #ifdef CONFIG_DM_I2C - fpgamap_write(fpga, priv->addr + REG_WRITE_MAILBOX, &data, - FPGAMAP_SIZE_16); + ihs_i2c_set(priv->map, write_mailbox, data); #else I2C_SET_REG(write_mailbox, data); #endif #ifdef CONFIG_DM_I2C - if (wait_for_int(dev, read)) + res = wait_for_int(dev, read); #else - if (wait_for_int(read)) + res = wait_for_int(read); #endif - return 1; + if (res) { + if (res == -ETIMEDOUT) + debug("%s: time out while waiting for event\n", __func__); + + return res; + } /* If we want to read, get the bytes from the mailbox */ if (read) { #ifdef CONFIG_DM_I2C - fpgamap_read(fpga, priv->addr + REG_READ_MAILBOX_EXT, &val, - FPGAMAP_SIZE_16); + ihs_i2c_get(priv->map, read_mailbox_ext, &val); #else I2C_GET_REG(read_mailbox_ext, &val); #endif @@ -206,19 +206,21 @@ static int ihs_i2c_send_buffer(uchar chip, u8 *data, int len, bool hold_bus, int read) #endif { + int res; + while (len) { int transfer = min(len, 2); bool is_last = len <= transfer; #ifdef CONFIG_DM_I2C - if (ihs_i2c_transfer(dev, chip, data, transfer, read, - hold_bus ? false : is_last)) - return 1; + res = ihs_i2c_transfer(dev, chip, data, transfer, read, + hold_bus ? false : is_last); #else - if (ihs_i2c_transfer(chip, data, transfer, read, - hold_bus ? false : is_last)) - return 1; + res = ihs_i2c_transfer(chip, data, transfer, read, + hold_bus ? false : is_last); #endif + if (res) + return res; data += transfer; len -= transfer; @@ -249,14 +251,19 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr, int alen, uchar *buffer, int len, int read) #endif { + int res; + /* Don't hold the bus if length of data to send/receive is zero */ + if (len <= 0) + return -EINVAL; + #ifdef CONFIG_DM_I2C - if (len <= 0 || ihs_i2c_address(dev, chip, addr, alen, len)) - return 1; + res = ihs_i2c_address(dev, chip, addr, alen, len); #else - if (len <= 0 || ihs_i2c_address(chip, addr, alen, len)) - return 1; + res = ihs_i2c_address(chip, addr, alen, len); #endif + if (res) + return res; #ifdef CONFIG_DM_I2C return ihs_i2c_send_buffer(dev, chip, buffer, len, false, read); @@ -270,11 +277,8 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, u8 *addr, int ihs_i2c_probe(struct udevice *bus) { struct ihs_i2c_priv *priv = dev_get_priv(bus); - int addr; - - addr = dev_read_u32_default(bus, "reg", -1); - priv->addr = addr; + regmap_init_mem(dev_ofnode(bus), &priv->map); return 0; } @@ -284,7 +288,7 @@ static int ihs_i2c_set_bus_speed(struct udevice *bus, uint speed) struct ihs_i2c_priv *priv = dev_get_priv(bus); if (speed != priv->speed && priv->speed != 0) - return 1; + return -EINVAL; priv->speed = speed; @@ -301,8 +305,8 @@ static int ihs_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs) * actucal data) or one message (just data) */ if (nmsgs > 2 || nmsgs == 0) { - debug("%s: Only one or two messages are supported.", __func__); - return -1; + debug("%s: Only one or two messages are supported\n", __func__); + return -ENOTSUPP; } omsg = nmsgs == 1 ? &dummy : msg; @@ -322,9 +326,11 @@ static int ihs_i2c_probe_chip(struct udevice *bus, u32 chip_addr, u32 chip_flags) { uchar buffer[2]; + int res; - if (ihs_i2c_transfer(bus, chip_addr, buffer, 0, I2COP_READ, true)) - return 1; + res = ihs_i2c_transfer(bus, chip_addr, buffer, 0, I2COP_READ, true); + if (res) + return res; return 0; } @@ -366,9 +372,11 @@ static void ihs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) static int ihs_i2c_probe(struct i2c_adapter *adap, uchar chip) { uchar buffer[2]; + int res; - if (ihs_i2c_transfer(chip, buffer, 0, I2COP_READ, true)) - return 1; + res = ihs_i2c_transfer(chip, buffer, 0, I2COP_READ, true); + if (res) + return res; return 0; } @@ -399,7 +407,7 @@ static unsigned int ihs_i2c_set_bus_speed(struct i2c_adapter *adap, unsigned int speed) { if (speed != adap->speed) - return 1; + return -EINVAL; return speed; } diff --git a/drivers/misc/gdsys_rxaui_ctrl.c b/drivers/misc/gdsys_rxaui_ctrl.c index 9a63c329bc..c56abce4d4 100644 --- a/drivers/misc/gdsys_rxaui_ctrl.c +++ b/drivers/misc/gdsys_rxaui_ctrl.c @@ -29,6 +29,7 @@ struct gdsys_rxaui_ctrl_regs { struct gdsys_rxaui_ctrl_priv { struct regmap *map; + bool state; }; int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) @@ -36,6 +37,8 @@ int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) struct gdsys_rxaui_ctrl_priv *priv = dev_get_priv(dev); u16 state; + priv->state = !priv->state; + rxaui_ctrl_get(priv->map, ctrl_1, &state); if (val) @@ -45,7 +48,7 @@ int gdsys_rxaui_set_polarity_inversion(struct udevice *dev, bool val) rxaui_ctrl_set(priv->map, ctrl_1, state); - return 0; + return !priv->state; } static const struct misc_ops gdsys_rxaui_ctrl_ops = { @@ -56,7 +59,9 @@ int gdsys_rxaui_ctrl_probe(struct udevice *dev) { struct gdsys_rxaui_ctrl_priv *priv = dev_get_priv(dev); - regmap_init_mem(dev, &priv->map); + regmap_init_mem(dev_ofnode(dev), &priv->map); + + priv->state = false; return 0; } diff --git a/drivers/mtd/nand/raw/fsl_elbc_spl.c b/drivers/mtd/nand/raw/fsl_elbc_spl.c index 30c3308940..099d86427c 100644 --- a/drivers/mtd/nand/raw/fsl_elbc_spl.c +++ b/drivers/mtd/nand/raw/fsl_elbc_spl.c @@ -14,6 +14,10 @@ #include <asm/fsl_lbc.h> #include <nand.h> +#ifdef CONFIG_MPC83xx +#include "../../../arch/powerpc/cpu/mpc83xx/elbc/elbc.h" +#endif + #define WINDOW_SIZE 8192 static void nand_wait(void) diff --git a/drivers/pci/pci_auto.c b/drivers/pci/pci_auto.c index d7237f6eee..1a3bf70834 100644 --- a/drivers/pci/pci_auto.c +++ b/drivers/pci/pci_auto.c @@ -359,7 +359,8 @@ int dm_pciauto_config_device(struct udevice *dev) PCI_DEV(dm_pci_get_bdf(dev))); break; #endif -#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349) +#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \ + !defined(CONFIG_TARGET_CADDY2) case PCI_CLASS_BRIDGE_OTHER: /* * The host/PCI bridge 1 seems broken in 8349 - it presents diff --git a/drivers/pci/pci_auto_old.c b/drivers/pci/pci_auto_old.c index e705a3072e..b566705c9d 100644 --- a/drivers/pci/pci_auto_old.c +++ b/drivers/pci/pci_auto_old.c @@ -376,7 +376,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev) PCI_DEV(dev)); break; #endif -#if defined(CONFIG_MPC834x) && !defined(CONFIG_VME8349) +#if defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_TARGET_VME8349) && \ + !defined(CONFIG_TARGET_CADDY2) case PCI_CLASS_BRIDGE_OTHER: /* * The host/PCI bridge 1 seems broken in 8349 - it presents diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 70d02d3f93..505ae9b45f 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -119,7 +119,7 @@ static void qe_sdma_init(void) */ static u8 thread_snum[] = { /* Evthreads 16-29 are not supported in MPC8309 */ -#if !defined(CONFIG_MPC8309) +#if !defined(CONFIG_ARCH_MPC8309) 0x04, 0x05, 0x0c, 0x0d, 0x14, 0x15, 0x1c, 0x1d, 0x24, 0x25, 0x2c, 0x2d, diff --git a/drivers/ram/mpc83xx_sdram.c b/drivers/ram/mpc83xx_sdram.c index 441baeb6f1..f03d0428b2 100644 --- a/drivers/ram/mpc83xx_sdram.c +++ b/drivers/ram/mpc83xx_sdram.c @@ -169,8 +169,8 @@ static int mpc83xx_sdram_static_init(ofnode node, u32 cs, u32 mapaddr, u32 size) odt_rd_cfg = ofnode_read_u32_default(node, "odt_rd_cfg", 0); switch (odt_rd_cfg) { case ODT_RD_ONLY_OTHER_DIMM: - if (!IS_ENABLED(CONFIG_MPC8360) && - !IS_ENABLED(CONFIG_MPC837x)) { + if (!IS_ENABLED(CONFIG_ARCH_MPC8360) && + !IS_ENABLED(CONFIG_ARCH_MPC837X)) { debug("%s: odt_rd_cfg value %d invalid.\n", ofnode_get_name(node), odt_rd_cfg); return -EINVAL; @@ -179,10 +179,10 @@ static int mpc83xx_sdram_static_init(ofnode node, u32 cs, u32 mapaddr, u32 size) case ODT_RD_NEVER: case ODT_RD_ONLY_CURRENT: case ODT_RD_ONLY_OTHER_CS: - if (!IS_ENABLED(CONFIG_MPC830x) && - !IS_ENABLED(CONFIG_MPC831x) && - !IS_ENABLED(CONFIG_MPC8360) && - !IS_ENABLED(CONFIG_MPC837x)) { + if (!IS_ENABLED(CONFIG_ARCH_MPC830X) && + !IS_ENABLED(CONFIG_ARCH_MPC831X) && + !IS_ENABLED(CONFIG_ARCH_MPC8360) && + !IS_ENABLED(CONFIG_ARCH_MPC837X)) { debug("%s: odt_rd_cfg value %d invalid.\n", ofnode_get_name(node), odt_rd_cfg); return -EINVAL; @@ -200,8 +200,8 @@ static int mpc83xx_sdram_static_init(ofnode node, u32 cs, u32 mapaddr, u32 size) odt_wr_cfg = ofnode_read_u32_default(node, "odt_wr_cfg", 0); switch (odt_wr_cfg) { case ODT_WR_ONLY_OTHER_DIMM: - if (!IS_ENABLED(CONFIG_MPC8360) && - !IS_ENABLED(CONFIG_MPC837x)) { + if (!IS_ENABLED(CONFIG_ARCH_MPC8360) && + !IS_ENABLED(CONFIG_ARCH_MPC837X)) { debug("%s: odt_wr_cfg value %d invalid.\n", ofnode_get_name(node), odt_wr_cfg); return -EINVAL; @@ -210,10 +210,10 @@ static int mpc83xx_sdram_static_init(ofnode node, u32 cs, u32 mapaddr, u32 size) case ODT_WR_NEVER: case ODT_WR_ONLY_CURRENT: case ODT_WR_ONLY_OTHER_CS: - if (!IS_ENABLED(CONFIG_MPC830x) && - !IS_ENABLED(CONFIG_MPC831x) && - !IS_ENABLED(CONFIG_MPC8360) && - !IS_ENABLED(CONFIG_MPC837x)) { + if (!IS_ENABLED(CONFIG_ARCH_MPC830X) && + !IS_ENABLED(CONFIG_ARCH_MPC831X) && + !IS_ENABLED(CONFIG_ARCH_MPC8360) && + !IS_ENABLED(CONFIG_ARCH_MPC837X)) { debug("%s: odt_wr_cfg value %d invalid.\n", ofnode_get_name(node), odt_wr_cfg); return -EINVAL; diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index 3827ea464b..85d7ff6c52 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -12,8 +12,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #ifdef CONFIG_MMC #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -30,92 +28,15 @@ #define CONFIG_VSC7385_ENET /* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz - * We choose the A type silicon as default, so the core is 400Mhz. - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_CORE_TO_CSB_3X1) -/* - * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits - * in 8308's HRCWH according to the manual, but original Freescale's - * code has them and I've expirienced some problems using the board - * with BDI3000 attached when I've tried to set these bits to zero - * (UART doesn't work after the 'reset run' command). - */ -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH (\ - SICRH_ESDHC_A_SD |\ - SICRH_ESDHC_B_SD |\ - SICRH_ESDHC_C_SD |\ - SICRH_GPIO_A_TSEC2 |\ - SICRH_GPIO_B_TSEC2_GTX_CLK125 |\ - SICRH_IEEE1588_A_GPIO |\ - SICRH_USB |\ - SICRH_GTM_GPIO |\ - SICRH_IEEE1588_B_GPIO |\ - SICRH_ETSEC2_CRS |\ - SICRH_GPIOSEL_1 |\ - SICRH_TMROBI_V3P3 |\ - SICRH_TSOBI1_V2P5 |\ - SICRH_TSOBI2_V2P5) /* 0x01b7d103 */ -#define CONFIG_SYS_SICRL (\ - SICRL_SPI_PF0 |\ - SICRL_UART_PF0 |\ - SICRL_IRQ_PF0 |\ - SICRL_I2C2_PF0 |\ - SICRL_ETSEC1_GTX_CLK125) /* 0x00000040 */ - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * SERDES */ #define CONFIG_FSL_SERDES #define CONFIG_FSL_SERDES1 0xe3000 /* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -201,13 +122,6 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -/* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -215,22 +129,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ @@ -244,45 +142,14 @@ */ #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) /* 0x00008000 */ -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit Port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) /* 0xFFFF8396 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - #ifdef CONFIG_VSC7385_ENET #define CONFIG_TSEC2 /* VSC7385 Base address on CS2 */ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8-bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xF0000801 */ -#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) /* 0xFFFE09FF */ -/* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -/* Access window size 128K */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) /* The flash address and size of the VSC7385 firmware image */ #define CONFIG_VSC7385_IMAGE 0xFE7FE000 #define CONFIG_VSC7385_IMAGE_SIZE 8192 @@ -419,52 +286,6 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* * Environment Configuration */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB_NAND.h index cfa5b56524..4153d609be 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB_NAND.h @@ -13,11 +13,7 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC831x 1 -#define CONFIG_MPC8313 1 -#define CONFIG_MPC8313ERDB 1 -#ifdef CONFIG_NAND #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -42,8 +38,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ #endif -#endif /* CONFIG_NAND */ - #ifndef CONFIG_SYS_MONITOR_BASE #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif @@ -60,19 +54,7 @@ #define CONFIG_VSC7385_ENET #define CONFIG_TSEC2 -#ifdef CONFIG_SYS_66MHZ -#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ -#elif defined(CONFIG_SYS_33MHZ) -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#else -#error Unknown oscillator frequency. -#endif - -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -#define CONFIG_SYS_IMMR 0xE0000000 - -#if defined(CONFIG_NAND) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_SPL_BUILD) #define CONFIG_DEFAULT_IMMR CONFIG_SYS_IMMR #endif @@ -85,9 +67,6 @@ */ #define CONFIG_SYS_8313ERDB_BROKEN_PMC 1 -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ - /* * Device configurations */ @@ -107,9 +86,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ /* * Manually set up DDR parameters, as this board does not @@ -186,21 +163,6 @@ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR \ - | OR_GPCM_EAD) - /* 0xFF006FF7 TODO SLOW 16 MB flash size */ - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE - /* 16 MB window size */ -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ @@ -224,20 +186,8 @@ #define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ -/* - * Local Bus LCRR and LBCR regs - */ -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR (0x00040000 /* TODO */ \ - | (0xFF << LBCR_BMT_SHIFT) \ - | 0xF) /* 0x0004ff0f */ - - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /*TODO */ - /* drivers/mtd/nand/raw/nand.c */ -#if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SPL_BUILD) #define CONFIG_SYS_NAND_BASE 0xFFF00000 #else #define CONFIG_SYS_NAND_BASE 0xE2800000 @@ -250,59 +200,14 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 #define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM \ - (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF8396 */ - -#ifdef CONFIG_NAND -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#else -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM -#endif - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM /* local bus write LED / read status buffer (BCSR) mapping */ #define CONFIG_SYS_BCSR_ADDR 0xFA000000 #define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ /* map at 0xFA000000 on LCS3 */ -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_BCSR_ADDR \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - /* 0xFA000801 */ -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_BCSR_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFF8FF7 */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_BCSR_ADDR -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) /* Vitesse 7385 */ @@ -312,23 +217,6 @@ #define CONFIG_SYS_VSC7385_BASE 0xF0000000 #define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_VSC7385_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFE09FF */ - - /* Access window base at VSC7385 base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) #endif @@ -409,25 +297,12 @@ /* * Environment */ -#if defined(CONFIG_NAND) - #define CONFIG_ENV_OFFSET (512 * 1024) - #define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE - #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - #define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) - #define CONFIG_ENV_OFFSET_REDUND \ - (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) -#elif !defined(CONFIG_SYS_RAMBOOT) - #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ - #define CONFIG_ENV_SIZE 0x2000 - -/* Address and size of Redundant Environment Sector */ -#else - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif +#define CONFIG_ENV_OFFSET (512 * 1024) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_RANGE (CONFIG_ENV_SECT_SIZE * 4) +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ @@ -461,134 +336,13 @@ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ -#ifdef CONFIG_SYS_66MHZ - -/* 66MHz IN, 133MHz CSB, 266 DDR, 266 CORE */ -/* 0x62040000 */ -#define CONFIG_SYS_HRCW_LOW (\ - 0x20000000 /* reserved, must be set */ |\ - HRCWL_DDRCM |\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_CSB_TO_CLKIN_2X1 |\ - HRCWL_CORE_TO_CSB_2X1) - -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2) - -#elif defined(CONFIG_SYS_33MHZ) - -/* 33MHz IN, 165MHz CSB, 330 DDR, 330 CORE */ -/* 0x65040000 */ -#define CONFIG_SYS_HRCW_LOW (\ - 0x20000000 /* reserved, must be set */ |\ - HRCWL_DDRCM |\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_CSB_TO_CLKIN_5X1 |\ - HRCWL_CORE_TO_CSB_2X1) - -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 5) - -#endif - -#define CONFIG_SYS_HRCW_HIGH_BASE (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN) - -#ifdef CONFIG_NAND -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_ROM_LOC_NAND_SP_8BIT |\ - HRCWH_RL_EXT_NAND) -#else -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY) -#endif +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) /* System IO Config */ #define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ /* Enable Internal USB Phy and GPIO on LCD Connector */ #define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC) -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) - -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI @ 0x80000000 */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI2 not supported on 8313 */ -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - /* * Environment Configuration */ diff --git a/include/configs/MPC8313ERDB_NOR.h b/include/configs/MPC8313ERDB_NOR.h new file mode 100644 index 0000000000..ff8dedf03e --- /dev/null +++ b/include/configs/MPC8313ERDB_NOR.h @@ -0,0 +1,377 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006, 2010. + */ +/* + * mpc8313epb board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_ELBC 1 + +/* + * On-board devices + * + * TSEC1 is VSC switch + * TSEC2 is SoC TSEC + */ +#define CONFIG_VSC7385_ENET +#define CONFIG_TSEC2 + +#define CONFIG_SYS_MEMTEST_START 0x00001000 +#define CONFIG_SYS_MEMTEST_END 0x07f00000 + +/* Early revs of this board will lock up hard when attempting + * to access the PMC registers, unless a JTAG debugger is + * connected, or some resistor modifications are made. + */ +#define CONFIG_SYS_8313ERDB_BROKEN_PMC 1 + +/* + * Device configurations + */ + +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + +#define CONFIG_TSEC1 + +/* The flash address and size of the VSC7385 firmware image */ +#define CONFIG_VSC7385_IMAGE 0xFE7FE000 +#define CONFIG_VSC7385_IMAGE_SIZE 8192 + +#endif + +/* + * DDR Setup + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ + +/* + * Manually set up DDR parameters, as this board does not + * seem to have the SPD connected to I2C. + */ +#define CONFIG_SYS_DDR_SIZE 128 /* MB */ +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ODT_RD_NEVER \ + | CSCONFIG_ODT_WR_ONLY_CURRENT \ + | CSCONFIG_ROW_BIT_13 \ + | CSCONFIG_COL_BIT_10) + /* 0x80010102 */ + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ + | (0 << TIMING_CFG0_WRT_SHIFT) \ + | (0 << TIMING_CFG0_RRT_SHIFT) \ + | (0 << TIMING_CFG0_WWT_SHIFT) \ + | (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ + | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ + | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) + /* 0x00220802 */ +#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ + | (8 << TIMING_CFG1_ACTTOPRE_SHIFT) \ + | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ + | (5 << TIMING_CFG1_CASLAT_SHIFT) \ + | (10 << TIMING_CFG1_REFREC_SHIFT) \ + | (3 << TIMING_CFG1_WRREC_SHIFT) \ + | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ + | (2 << TIMING_CFG1_WRTORD_SHIFT)) + /* 0x3835a322 */ +#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ + | (5 << TIMING_CFG2_CPO_SHIFT) \ + | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ + | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ + | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ + | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ + | (6 << TIMING_CFG2_FOUR_ACT_SHIFT)) + /* 0x129048c6 */ /* P9-45,may need tuning */ +#define CONFIG_SYS_DDR_INTERVAL ((1296 << SDRAM_INTERVAL_REFINT_SHIFT) \ + | (1280 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) + /* 0x05100500 */ +#if defined(CONFIG_DDR_2T_TIMING) +#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_32 \ + | SDRAM_CFG_2T_EN) + /* 0x43088000 */ +#else +#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ + | SDRAM_CFG_SDRAM_TYPE_DDR2 \ + | SDRAM_CFG_DBW_32) + /* 0x43080000 */ +#endif +#define CONFIG_SYS_SDRAM_CFG2 0x00401000 +/* set burst length to 8 for 32-bit data path */ +#define CONFIG_SYS_DDR_MODE ((0x4448 << SDRAM_MODE_ESD_SHIFT) \ + | (0x0632 << SDRAM_MODE_SD_SHIFT)) + /* 0x44480632 */ +#define CONFIG_SYS_DDR_MODE_2 0x8000C000 + +#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 + /*0x02000000*/ +#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ + | DDRCDR_PZ_NOMZ \ + | DDRCDR_NZ_NOMZ \ + | DDRCDR_M_ODR) + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 /* sectors per device */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && \ + !defined(CONFIG_SPL_BUILD) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ + +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* drivers/mtd/nand/nand.c */ +#define CONFIG_SYS_NAND_BASE 0xE2800000 + +#define CONFIG_MTD_PARTITION + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_NAND_FSL_ELBC 1 +#define CONFIG_SYS_NAND_BLOCK_SIZE 16384 +#define CONFIG_SYS_NAND_WINDOW_SIZE (32 * 1024) + +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM + +/* local bus write LED / read status buffer (BCSR) mapping */ +#define CONFIG_SYS_BCSR_ADDR 0xFA000000 +#define CONFIG_SYS_BCSR_SIZE (32 * 1024) /* 0x00008000 */ + /* map at 0xFA000000 on LCS3 */ +/* Vitesse 7385 */ + +#ifdef CONFIG_VSC7385_ENET + + /* VSC7385 Base address on LCS2 */ +#define CONFIG_SYS_VSC7385_BASE 0xF0000000 +#define CONFIG_SYS_VSC7385_SIZE (128 * 1024) /* 0x00020000 */ + + +#endif + +#define CONFIG_MPC83XX_GPIO 1 + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ + +/* + * TSEC + */ + +#define CONFIG_GMII /* MII PHY management */ + +#ifdef CONFIG_TSEC1 +#define CONFIG_HAS_ETH0 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define TSEC1_PHY_ADDR 0x1c +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC1_PHYIDX 0 +#endif + +#ifdef CONFIG_TSEC2 +#define CONFIG_HAS_ETH1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define TSEC2_PHY_ADDR 4 +#define TSEC2_FLAGS TSEC_GIGABIT +#define TSEC2_PHYIDX 0 +#endif + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC1" + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1337 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* + * Environment + */ +#if !defined(CONFIG_SYS_RAMBOOT) + #define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ + #define CONFIG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#else + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + + /* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) + +/* System IO Config */ +#define CONFIG_SYS_SICRH (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */ + /* Enable Internal USB Phy and GPIO on LCD Connector */ +#define CONFIG_SYS_SICRL (SICRL_USBDR_10 | SICRL_LBC) + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_NETDEV "eth1" + +#define CONFIG_HOSTNAME "mpc8313erdb" +#define CONFIG_ROOTPATH "/nfs/root/path" +#define CONFIG_BOOTFILE "uImage" + /* U-Boot image on TFTP server */ +#define CONFIG_UBOOTPATH "u-boot.bin" +#define CONFIG_FDTFILE "mpc8313erdb.dtb" + + /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=" CONFIG_NETDEV "\0" \ + "ethprime=TSEC1\0" \ + "uboot=" CONFIG_UBOOTPATH "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "erase " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ + " $filesize; " \ + "protect on " __stringify(CONFIG_SYS_TEXT_BASE) \ + " +$filesize; " \ + "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) \ + " $filesize\0" \ + "fdtaddr=780000\0" \ + "fdtfile=" CONFIG_FDTFILE "\0" \ + "console=ttyS0\0" \ + "setbootargs=setenv bootargs " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \ + "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:"\ + "$netdev:off " \ + "root=$rootdev rw console=$console,$baudrate $othbootargs\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv rootdev /dev/nfs;" \ + "run setbootargs;" \ + "run setipargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv rootdev /dev/ram;" \ + "run setbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 0ccf4acb82..521c5ca6ee 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -22,49 +22,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC831x 1 /* MPC831x CPU family */ -#define CONFIG_MPC8315 1 /* MPC8315 CPU specific */ -#define CONFIG_MPC8315ERDB 1 /* MPC8315ERDB board specific */ - -/* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, CORE = 400MHz, DDRC = 266MHz, LBC = 133MHz - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_2X1 |\ - HRCWL_CORE_TO_CSB_3X1) -#define CONFIG_SYS_HRCW_HIGH_BASE (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LALE_NORMAL) - -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_ROM_LOC_NAND_SP_8BIT |\ - HRCWH_RL_EXT_NAND) -#else -#define CONFIG_SYS_HRCW_HIGH (CONFIG_SYS_HRCW_HIGH_BASE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY) -#endif /* * System IO Config @@ -75,23 +32,9 @@ #define CONFIG_HWCONFIG /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -173,13 +116,7 @@ #define CONFIG_SYS_GBL_DATA_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 -#define CONFIG_FSL_ELBC 1 +#define CONFIG_FSL_ELBC /* * FLASH on the Local Bus @@ -189,24 +126,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is 8M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ /* 127 64KB sectors and 8 8KB top sectors per device */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -238,31 +157,11 @@ #define CONFIG_SYS_NAND_U_BOOT_OFFS 16384 #define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM \ - (P2SZ_TO_AM(CONFIG_SYS_NAND_WINDOW_SIZE) \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF8396 */ - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM + + +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM #if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE && \ !defined(CONFIG_NAND_SPL) @@ -276,7 +175,7 @@ */ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2) +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} @@ -438,97 +337,8 @@ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* * MMU Setup */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_128M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \ - | BATU_BL_8M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#define CONFIG_SYS_IBAT6L 0 -#define CONFIG_SYS_IBAT6U 0 -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -#define CONFIG_SYS_IBAT7L 0 -#define CONFIG_SYS_IBAT7U 0 -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 578202f3be..418c6729e1 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -14,40 +14,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC832x 1 /* MPC832x CPU specific */ - -/* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN -#endif - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CSB_TO_CLKIN_2X1 |\ - HRCWL_CORE_TO_CSB_2_5X1 |\ - HRCWL_CE_PLL_VCO_DIV_2 |\ - HRCWL_CE_PLL_DIV_1X1 |\ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LALE_NORMAL) /* * System IO Config @@ -55,24 +21,9 @@ #define CONFIG_SYS_SICRL 0x00000000 /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * System performance - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -/* (0-1) Optimize transactions between CSB and the SEC and QUICC Engine block */ -#define CONFIG_SYS_SPCR_OPT 1 - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #undef CONFIG_SPD_EEPROM #if defined(CONFIG_SPD_EEPROM) @@ -163,36 +114,12 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFE006FF7 */ + #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -323,109 +250,6 @@ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \ - | BATU_BL_4M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#else -#define CONFIG_SYS_IBAT5L (0) -#define CONFIG_SYS_IBAT5U (0) -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#endif - -/* Nothing in BAT7 */ -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if (CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index 8f11d9b3a4..df9cc48417 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -11,58 +11,6 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC832x 1 /* MPC832x CPU specific */ -#define CONFIG_MPC832XEMDS 1 /* MPC832XEMDS board specific */ - -/* - * System Clock Setup - */ -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ -#else -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66000000 -#endif - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CSB_TO_CLKIN_2X1 |\ - HRCWL_CORE_TO_CSB_2X1 |\ - HRCWL_CE_PLL_VCO_DIV_2 |\ - HRCWL_CE_PLL_DIV_1X1 |\ - HRCWL_CE_TO_PLL_1X3) - -#ifdef CONFIG_PCISLAVE -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT |\ - HRCWH_PCI1_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LALE_NORMAL) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LALE_NORMAL) -#endif /* * System IO Config @@ -70,16 +18,9 @@ #define CONFIG_SYS_SICRL 0x00000000 /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */ #undef CONFIG_SPD_EEPROM @@ -173,36 +114,11 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 16 /* FLASH size is 16M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfe006ff7 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ @@ -214,22 +130,7 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFFE9F7 */ + /* * Windows to access PIB via local bus @@ -237,45 +138,16 @@ /* PIB window base 0xF8008000 */ #define CONFIG_SYS_PIB_BASE 0xF8008000 #define CONFIG_SYS_PIB_WINDOW_SIZE (32 * 1024) -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PIB_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) /* * CS2 on Local Bus, to PIB */ -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_PIB_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8008801 */ -#define CONFIG_SYS_OR2_PRELIM (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ + /* * CS3 on Local Bus, to PIB */ -#define CONFIG_SYS_BR3_PRELIM ((CONFIG_SYS_PIB_BASE + \ - CONFIG_SYS_PIB_WINDOW_SIZE) \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8010801 */ -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(CONFIG_SYS_PIB_WINDOW_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffffe9f7 */ + /* * Serial Port @@ -404,116 +276,6 @@ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR \ - | BATU_BL_4M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* BCSR: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_BCSR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_BCSR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI1_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI1_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index bda477cc16..7640d7610d 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -16,31 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC834x 1 /* MPC834x family */ -#define CONFIG_MPC8349 1 /* MPC8349 specific */ - -#define CONFIG_PCI_66M -#ifdef CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ -#endif - -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 66666666 /* in Hz */ -#endif /* CONFIG_PCISLAVE */ - -#ifndef CONFIG_SYS_CLK_FREQ -#ifdef CONFIG_PCI_66M -#define CONFIG_SYS_CLK_FREQ 66000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 -#else -#define CONFIG_SYS_CLK_FREQ 33000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 -#endif -#endif - -#define CONFIG_SYS_IMMR 0xE0000000 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ @@ -77,9 +52,7 @@ */ #undef CONFIG_DDR_32BIT -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) #undef CONFIG_DDR_2T_TIMING @@ -146,23 +119,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -184,20 +140,7 @@ */ #define CONFIG_SYS_BCSR 0xE2400000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0x00000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) - /* 0xFFFFE8F0 */ + #define CONFIG_SYS_INIT_RAM_LOCK 1 #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ @@ -211,92 +154,6 @@ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* - * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory. - * if board has SRDAM on local bus, you can define CONFIG_SYS_LB_SDRAM - */ -#undef CONFIG_SYS_LB_SDRAM - -#ifdef CONFIG_SYS_LB_SDRAM -/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port-size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 - */ - -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LBC_SDRAM_BASE \ - | BR_PS_32 /* 32-bit port */ \ - | BR_MS_SDRAM /* MSEL = SDRAM */ \ - | BR_V) /* Valid */ - /* 0xF0001861 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 - */ - -#define CONFIG_SYS_OR2_PRELIM (OR_AM_64MB \ - | OR_SDRAM_XAM \ - | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ - | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ - | OR_SDRAM_EAD) - /* 0xFC006901 */ - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -#define CONFIG_SYS_LBC_LSDMR_COMMON (LSDMR_RFEN \ - | LSDMR_BSMA1516 \ - | LSDMR_RFCR8 \ - | LSDMR_PRETOACT6 \ - | LSDMR_ACTTORW3 \ - | LSDMR_BL8 \ - | LSDMR_WRC3 \ - | LSDMR_CL3) - -/* - * SDRAM Controller configuration sequence. - */ -#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) -#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) -#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) -#endif - -/* * Serial Port */ #define CONFIG_SYS_NS16550_SERIAL @@ -363,13 +220,6 @@ #if defined(CONFIG_PCI) -#define PCI_ONE_PCI1 -#if defined(PCI_64BIT) -#undef PCI_ALL_PCI1 -#undef PCI_TWO_PCI1 -#undef PCI_ONE_PCI1 -#endif - #define CONFIG_83XX_PCI_STREAMING #undef CONFIG_EEPRO100 @@ -463,93 +313,9 @@ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ -#if 1 /*528/264*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) -#elif 0 /*396/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_3X1) -#elif 0 /*264/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_2X1) -#elif 0 /*132/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_1X1) -#elif 0 /*264/264 */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_1X1) -#endif - -#ifdef CONFIG_PCISLAVE -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT |\ - HRCWH_64_BIT_PCI |\ - HRCWH_PCI1_ARBITER_DISABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#if defined(PCI_64BIT) -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_64_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif /* PCI_64BIT */ -#endif /* CONFIG_PCISLAVE */ - /* * System performance */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ -#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ @@ -557,115 +323,10 @@ #define CONFIG_SYS_SICRH 0 #define CONFIG_SYS_SICRL SICRL_LDP_A -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE) - -/* #define CONFIG_SYS_HID0_FINAL (\ - HID0_ENABLE_INSTRUCTION_CACHE |\ - HID0_ENABLE_M_BIT |\ - HID0_ENABLE_ADDRESS_BROADCAST) */ - -#define CONFIG_SYS_HID2 HID2_HBE -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI @ 0x80000000 */ #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L (0) -#define CONFIG_SYS_IBAT1U (0) -#define CONFIG_SYS_IBAT2L (0) -#define CONFIG_SYS_IBAT2U (0) -#endif - -#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) #endif -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h new file mode 100644 index 0000000000..493f6df187 --- /dev/null +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -0,0 +1,455 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2006-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +/* + * mpc8349emds board configuration file + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ + +#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x00100000 + +/* + * DDR Setup + */ +#define CONFIG_DDR_ECC /* support DDR ECC function */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * SYS_FSL_DDR2 is selected in Kconfig to use unified DDR driver + * unselect it to use old spd_sdram.c + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x52 +#define SPD_EEPROM_ADDRESS2 0x51 +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ + | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#undef CONFIG_DDR_2T_TIMING + +/* + * DDRCDR - DDR Control Driver Register + */ +#define CONFIG_SYS_DDRCDR_VALUE 0x80080001 + +#if defined(CONFIG_SPD_EEPROM) +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ +#else +/* + * Manually set up DDR parameters + */ +#define CONFIG_SYS_DDR_SIZE 256 /* MB */ +#if defined(CONFIG_DDR_II) +#define CONFIG_SYS_DDRCDR 0x80080001 +#define CONFIG_SYS_DDR_CS2_BNDS 0x0000000f +#define CONFIG_SYS_DDR_CS2_CONFIG 0x80330102 +#define CONFIG_SYS_DDR_TIMING_0 0x00220802 +#define CONFIG_SYS_DDR_TIMING_1 0x38357322 +#define CONFIG_SYS_DDR_TIMING_2 0x2f9048c8 +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CONFIG_SYS_DDR_CLK_CNTL 0x02000000 +#define CONFIG_SYS_DDR_MODE 0x47d00432 +#define CONFIG_SYS_DDR_MODE2 0x8000c000 +#define CONFIG_SYS_DDR_INTERVAL 0x03cf0080 +#define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#else +#define CONFIG_SYS_DDR_CS2_CONFIG (CSCONFIG_EN \ + | CSCONFIG_ROW_BIT_13 \ + | CSCONFIG_COL_BIT_10) +#define CONFIG_SYS_DDR_TIMING_1 0x36332321 +#define CONFIG_SYS_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CONFIG_SYS_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ + +#if defined(CONFIG_DDR_32BIT) +/* set burst length to 8 for 32-bit data path */ + /* DLL,normal,seq,4/2.5, 8 burst len */ +#define CONFIG_SYS_DDR_MODE 0x00000023 +#else +/* the default burst length is 4 - for 64-bit data path */ + /* DLL,normal,seq,4/2.5, 4 burst len */ +#define CONFIG_SYS_DDR_MODE 0x00000022 +#endif +#endif +#endif + +/* + * SDRAM on the Local Bus + */ +#define CONFIG_SYS_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ +#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 32 /* max flash size in MB */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#else +#undef CONFIG_SYS_RAMBOOT +#endif + +/* + * BCSR register on local bus 32KB, 8-bit wide for MDS config reg + */ +#define CONFIG_SYS_BCSR 0xE2400000 + /* Access window base at BCSR base */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ + +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ + +/* + * The MPC834xEA MDS for 834xE rev3.1 may not be assembled SDRAM memory. + */ + +/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ +/* + * Base Register 2 and Option Register 2 configure SDRAM. + * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. + * + * For BR2, need: + * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 + * port-size = 32-bits = BR2[19:20] = 11 + * no parity checking = BR2[21:22] = 00 + * SDRAM for MSEL = BR2[24:26] = 011 + * Valid = BR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 + */ + +/* + * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. + * + * For OR2, need: + * 64MB mask for AM, OR2[0:7] = 1111 1100 + * XAM, OR2[17:18] = 11 + * 9 columns OR2[19-21] = 010 + * 13 rows OR2[23-25] = 100 + * EAD set for extra time OR[31] = 1 + * + * 0 4 8 12 16 20 24 28 + * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 + */ + + + /* LB sdram refresh timer, about 6us */ +#define CONFIG_SYS_LBC_LSRT 0x32000000 + /* LB refresh timer prescal, 266MHz/32 */ +#define CONFIG_SYS_LBC_MRTPR 0x20000000 + +#define CONFIG_SYS_LBC_LSDMR_COMMON (LSDMR_RFEN \ + | LSDMR_BSMA1516 \ + | LSDMR_RFCR8 \ + | LSDMR_PRETOACT6 \ + | LSDMR_ACTTORW3 \ + | LSDMR_BL8 \ + | LSDMR_WRC3 \ + | LSDMR_CL3) + +/* + * SDRAM Controller configuration sequence. + */ +#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) +#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) +#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) +#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) +#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } + +/* SPI */ +#undef CONFIG_SOFT_SPI /* SPI bit-banged */ + +/* GPIOs. Used as SPI chip selects */ +#define CONFIG_SYS_GPIO1_PRELIM +#define CONFIG_SYS_GPIO1_DIR 0xC0000000 /* SPI CS on 0, LED on 1 */ +#define CONFIG_SYS_GPIO1_DAT 0xC0000000 /* Both are active LOW */ + +/* TSEC */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) + +/* USB */ +#define CONFIG_SYS_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE +#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 +#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE +#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 +#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ + +#if defined(CONFIG_PCI) + +#define CONFIG_83XX_PCI_STREAMING + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xFIXME + #define PCI_ENET0_MEMADDR 0xFIXME + #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ +#endif + +#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + +/* + * TSEC configuration + */ + +#if defined(CONFIG_TSEC_ENET) + +#define CONFIG_GMII 1 /* MII PHY management */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * Environment + */ +#ifndef CONFIG_SYS_RAMBOOT + #define CONFIG_ENV_ADDR \ + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CONFIG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#else + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +/* + * System performance + */ +#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ +#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ +#define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ +#define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ + +/* System IO Config */ +#define CONFIG_SYS_SICRH 0 +#define CONFIG_SYS_SICRL SICRL_LDP_A + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH0 +#endif + +#define CONFIG_HOSTNAME "mpc8349emds" +#define CONFIG_ROOTPATH "/nfsroot/rootfs" +#define CONFIG_BOOTFILE "uImage" + +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=mpc8349emds\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ + "update=protect off fe000000 fe03ffff; " \ + "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"\ + "upd=run load update\0" \ + "fdtaddr=780000\0" \ + "fdtfile=mpc834x_mds.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ + "$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 111023b7be..a3f704c73b 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -39,25 +39,13 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) -#define CONFIG_SYS_LOWBOOT -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ -#define CONFIG_MPC8349 /* MPC8349 specific */ - -#define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ - #define CONFIG_MISC_INIT_F /* * On-board devices */ -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX /* The CF card interface on the back of the board */ #define CONFIG_COMPACT_FLASH #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ @@ -154,9 +142,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_83XX_DDR_USES_CS0 #define CONFIG_SYS_MEMTEST_START 0x1000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x2000 @@ -218,23 +204,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * BRx, ORx, LBLAWBARx, and LBLAWARx */ -/* Flash */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_16MB) /* Vitesse 7385 */ @@ -242,39 +211,12 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) #endif -/* LED */ #define CONFIG_SYS_LED_BASE 0xF9000000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LED_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) -#define CONFIG_SYS_OR2_PRELIM (OR_AM_2MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) + /* Compact Flash */ @@ -282,14 +224,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_CF_BASE 0xF0000000 -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CF_BASE \ - | BR_PS_16 \ - | BR_MS_UPMA \ - | BR_V) -#define CONFIG_SYS_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CF_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) #endif @@ -317,21 +251,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ /* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32*/ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* * Serial Port */ #define CONFIG_SYS_NS16550_SERIAL @@ -394,13 +313,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define CONFIG_PCI_66M -#ifdef CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#endif - /* TSEC */ #ifdef CONFIG_TSEC_ENET @@ -471,48 +383,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) - -#ifdef CONFIG_SYS_LOWBOOT -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* * System performance */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ -#define CONFIG_SYS_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ -#define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ #define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ @@ -526,108 +399,6 @@ boards, we say we have two, but don't display a message if we find only one. */ /* USB DR as device + USB MPH as host */ #define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) -#define CONFIG_SYS_HID0_INIT 0x00000000 -#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE - -#define CONFIG_SYS_HID2 HID2_HBE -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI */ -#ifdef CONFIG_PCI -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L 0 -#define CONFIG_SYS_IBAT1U 0 -#define CONFIG_SYS_IBAT2L 0 -#define CONFIG_SYS_IBAT2U 0 -#endif - -#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L 0 -#define CONFIG_SYS_IBAT3U 0 -#define CONFIG_SYS_IBAT4L 0 -#define CONFIG_SYS_IBAT4U 0 -#endif - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L 0 -#define CONFIG_SYS_IBAT7U 0 - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif @@ -645,7 +416,7 @@ boards, we say we have two, but don't display a message if we find only one. */ /* U-Boot image on TFTP server */ #define CONFIG_UBOOTPATH "u-boot.bin" -#ifdef CONFIG_MPC8349ITX +#ifdef CONFIG_TARGET_MPC8349ITX #define CONFIG_FDTFILE "mpc8349emitx.dtb" #else #define CONFIG_FDTFILE "mpc8349emitxgp.dtb" diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 50f6df5844..724f8afb76 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -11,70 +11,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC837x 1 /* MPC837x CPU specific */ -#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ - -/* - * System Clock Setup - */ -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 66000000 /* in HZ */ -#else -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ 66000000 -#endif - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66MHz, then - * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_6X1 |\ - HRCWL_CORE_TO_CSB_1_5X1) - -#ifdef CONFIG_PCISLAVE -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT |\ - HRCWH_PCI1_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LDP_CLEAR) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LDP_CLEAR) -#endif - -/* Arbiter Configuration Register */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ - -/* System Priority Control Register */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */ /* * IP blocks clock configuration @@ -97,16 +33,9 @@ #define CONFIG_HWCONFIG /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_83XX_DDR_USES_CS0 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN \ @@ -205,12 +134,6 @@ #define CONFIG_SYS_GBL_DATA_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 -#define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_FSL_ELBC 1 /* @@ -219,24 +142,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFE000FF7 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -250,23 +155,6 @@ */ #define CONFIG_SYS_BCSR 0xF8000000 /* Access window base at BCSR base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF8000801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFFFFE9F7 */ /* * NAND Flash on the Local Bus @@ -275,23 +163,7 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32KB \ - | OR_FCM_BCTLD \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_RST \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - /* 0xFFFF919E */ - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + /* * Serial Port @@ -469,123 +341,6 @@ extern int board_pci_host_broken(void); #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR \ - | BATU_BL_8M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* BCSR: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_BCSR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_BCSR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 4ddd62ddbb..13a7682958 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -12,8 +12,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC837x 1 /* MPC837x CPU specific */ -#define CONFIG_MPC837XERDB 1 #define CONFIG_HWCONFIG @@ -22,70 +20,9 @@ */ #define CONFIG_VSC7385_ENET -/* - * System Clock Setup - */ -#ifdef CONFIG_PCISLAVE -#define CONFIG_83XX_PCICLK 66666667 /* in HZ */ -#else -#define CONFIG_83XX_CLKIN 66666667 /* in Hz */ -#define CONFIG_PCIE -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN -#endif - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_5X1 |\ - HRCWL_CORE_TO_CSB_2X1) - -#ifdef CONFIG_PCISLAVE -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT |\ - HRCWH_PCI1_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LDP_CLEAR) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN |\ - HRCWH_LDP_CLEAR) -#endif - /* System performance - define the value i.e. CONFIG_SYS_XXX */ -/* Arbiter Configuration Register */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ - -/* System Priority Control Regsiter */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1&2 emergency priority (0-3) */ - /* System Clock Configuration Register */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ @@ -103,11 +40,6 @@ #define CONFIG_SYS_OBIR 0x30100000 /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * Device configurations */ @@ -126,9 +58,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x03000000 #define CONFIG_SYS_83XX_DDR_USES_CS0 @@ -228,12 +158,6 @@ #define CONFIG_SYS_GBL_DATA_OFFSET \ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 -#define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_FSL_ELBC 1 /* @@ -244,20 +168,6 @@ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_9 \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFF800191 */ #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ @@ -270,20 +180,7 @@ * NAND Flash on the Local Bus */ #define CONFIG_SYS_NAND_BASE 0xE0600000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_DECC_CHK_GEN /* Use HW ECC */ \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + /* Vitesse 7385 */ @@ -291,24 +188,6 @@ #ifdef CONFIG_VSC7385_ENET -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_VSC7385_BASE \ - | BR_PS_8 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF0000801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_SETA \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfffe09ff */ - - /* Access Base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_VSC7385_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) #endif @@ -483,124 +362,6 @@ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) - -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR \ - | BATU_BL_8M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* L2 Switch: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_VSC7385_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_VSC7385_BASE \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_32M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_PCI -/* PCI MEM space: cacheable */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -/* PCI MMIO space: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -#endif - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index b534d4758b..04f55e3990 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -43,7 +43,6 @@ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported & enabled */ #define CONFIG_ALTIVEC 1 /* diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9318b190ae..8c01891e26 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -45,7 +45,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_SYS_NUM_ADDR_MAP 8 /* Number of addr map slots = 8 dbats */ #define CONFIG_ALTIVEC 1 diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 0942b872ac..0da34d05af 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -15,26 +15,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC834x 1 /* MPC834x specific */ -#define CONFIG_MPC8349 1 /* MPC8349 specific */ - -/* IMMR Base Address Register, use Freescale default: 0xff400000 */ -#define CONFIG_SYS_IMMR 0xff400000 - -/* System clock. Primary input clock when in PCI host mode */ -#define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ - -/* - * Local Bus LCRR - * LCRR: DLL bypass, Clock divider is 8 - * - * for CSB = 266 MHz it gives LCB clock frequency = 33 MHz - * - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 /* board pre init: do not call, nothing to do */ @@ -44,9 +24,7 @@ * DDR Setup */ /* DDR is system memory*/ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 #define DDR_CASLAT_25 /* CASLAT set to 2.5 */ #undef CONFIG_DDR_ECC /* only for ECC DDR module */ #undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup */ @@ -81,43 +59,16 @@ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ -/* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BR_BA) \ - | BR_MS_GPCM \ - | BR_PS_32 \ - | BR_V) - -/* FLASH timing (0x0000_0c54) */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV4 \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX) - -#define CONFIG_SYS_PRELIM_OR_AM OR_AM_1GB /* OR addr mask: 1 GiB */ - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM \ - | CONFIG_SYS_OR_TIMING_FLASH) - -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_1GB) - - /* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE /* disable remaining mappings */ #define CONFIG_SYS_BR1_PRELIM 0x00000000 #define CONFIG_SYS_OR1_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR1_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x00000000 #define CONFIG_SYS_BR2_PRELIM 0x00000000 #define CONFIG_SYS_OR2_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR2_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x00000000 #define CONFIG_SYS_BR3_PRELIM 0x00000000 #define CONFIG_SYS_OR3_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWBAR3_PRELIM 0x00000000 -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x00000000 /* * Monitor config @@ -265,150 +216,15 @@ /* Initial Memory map for Linux */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) - -#if defined(PCI_64BIT) -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_64_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* System IO Config */ #define CONFIG_SYS_SICRH 0 #define CONFIG_SYS_SICRL SICRL_LDP_A -/* i-cache and d-cache disabled */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (CONFIG_SYS_HID0_INIT | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR 0 - 512M */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_BASE + 0x10000000 \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_BASE + 0x10000000 \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* stack in DCACHE @ 512M (no backing mem) */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_INIT_RAM_ADDR \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_INIT_RAM_ADDR \ - | BATU_BL_128K \ - | BATU_VS \ - | BATU_VP) - /* PCI */ #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_PCI1_IO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_PCI1_IO_BASE \ - | BATU_BL_16M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) -#define CONFIG_SYS_IBAT5L (0) -#define CONFIG_SYS_IBAT5U (0) #endif -/* IMMRBAR */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_IMMR \ - | BATU_BL_1M \ - | BATU_VS \ - | BATU_VP) - -/* FLASH */ -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_FLASH_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_FLASH_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/caddy2.h b/include/configs/caddy2.h new file mode 100644 index 0000000000..15ac17985f --- /dev/null +++ b/include/configs/caddy2.h @@ -0,0 +1,334 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * esd vme8349 U-Boot configuration file + * Copyright (c) 2008, 2009 esd gmbh Hannover Germany + * + * (C) Copyright 2006-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * reinhard.arlt@esd-electronics.de + * Based on the MPC8349EMDS config. + */ + +/* + * vme8349 board configuration file. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ + +/* Don't enable PCI2 on vme834x - it doesn't exist physically. */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ + +#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x00100000 + +/* + * DDR Setup + */ +#define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_READ_SPD vme8349_read_spd +#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT + +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is sys memory*/ +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ + | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_DDR_2T_TIMING +#define CONFIG_SYS_DDRCDR (DDRCDR_DHC_EN \ + | DDRCDR_ODT \ + | DDRCDR_Q_DRN) + /* 0x80080001 */ + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ + + +#define CONFIG_SYS_WINDOW1_BASE 0xf0000000 + + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */ + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#else +#undef CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */ + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Malloc size */ + +#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } +/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */ + +#define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */ + +/* TSEC */ +#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) +#define CONFIG_SYS_TSEC2_OFFSET 0x25000 +#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET) + +/* + * General PCI + * Addresses are mapped 1-1. + */ +#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE +#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 +#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE +#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 +#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ + +#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE +#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000 +#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE +#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000 +#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ + +#if defined(CONFIG_PCI) + +#undef CONFIG_EEPRO100 +#undef CONFIG_TULIP + +#if !defined(CONFIG_PCI_PNP) + #define PCI_ENET0_IOADDR 0xFIXME + #define PCI_ENET0_MEMADDR 0xFIXME + #define PCI_IDSEL_NUMBER 0xFIXME +#endif + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + +#endif /* CONFIG_PCI */ + +/* + * TSEC configuration + */ + +#if defined(CONFIG_TSEC_ENET) + +#define CONFIG_GMII /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 +#define CONFIG_TSEC2_NAME "TSEC1" +#define CONFIG_PHY_M88E1111 +#define TSEC1_PHY_ADDR 0x08 +#define TSEC2_PHY_ADDR 0x10 +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" + +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#ifndef CONFIG_SYS_RAMBOOT + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000) + #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ + #define CONFIG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#else + #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) + #define CONFIG_ENV_SIZE 0x2000 +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE + +/* + * Command line configuration. + */ +#define CONFIG_SYS_RTC_BUS_NUM 0x01 +#define CONFIG_SYS_I2C_RTC_ADDR 0x32 +#define CONFIG_RTC_RX8025 + +/* Pass Ethernet MAC to VxWorks */ +#define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0 + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Init Memory map for Linux*/ + +#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ + +/* System IO Config */ +#define CONFIG_SYS_SICRH 0 +#define CONFIG_SYS_SICRL SICRL_LDP_A + +#define CONFIG_SYS_GPIO1_PRELIM +#define CONFIG_SYS_GPIO1_DIR 0x00100000 +#define CONFIG_SYS_GPIO1_DAT 0x00100000 + +#define CONFIG_SYS_GPIO2_PRELIM +#define CONFIG_SYS_GPIO2_DIR 0x78900000 +#define CONFIG_SYS_GPIO2_DAT 0x70100000 + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#endif + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_TSEC_ENET) +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_HOSTNAME "VME8349" +#define CONFIG_ROOTPATH "/tftpboot/rootfs" +#define CONFIG_BOOTFILE "uImage" + +#define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=vme8349\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \ + "update=protect off fff00000 fff3ffff; " \ + "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \ + "upd=run load update\0" \ + "fdtaddr=780000\0" \ + "fdtfile=vme8349.dtb\0" \ + "" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ + "$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#ifndef __ASSEMBLY__ +int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len); +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h new file mode 100644 index 0000000000..11d367a151 --- /dev/null +++ b/include/configs/gazerbeam.h @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2015 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * DDR Setup + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ +/* TODO: Check: Can this be unified with CONFIG_SYS_SDRAM_BASE? */ +#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_SDRAM_BASE + +/* + * Memory test + * TODO: Migrate! + */ +#define CONFIG_SYS_MEMTEST_START 0x00001000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x07e00000 + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/* + * Environment + */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 + +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ + +/* TODO: Turn into string option and migrate to Kconfig */ +#define CONFIG_HOSTNAME "gazerbeam" +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" + +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS1\0" \ + "u-boot=u-boot.bin\0" \ + "kernel_addr=1000000\0" \ + "fdt_addr=C00000\0" \ + "fdtfile=hrcon.dtb\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " __stringify(CONFIG_SYS_MONITOR_BASE)\ + " +${filesize};cp.b ${fileaddr} " \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp ${kernel_addr} $bootfile;" \ + "tftp ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_MMCBOOTCOMMAND \ + "setenv bootargs root=/dev/mmcblk0p3 rw rootwait " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "ext2load mmc 0:2 ${kernel_addr} $bootfile;" \ + "ext2load mmc 0:2 ${fdt_addr} $fdtfile;" \ + "bootm ${kernel_addr} - ${fdt_addr}" + +#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h index 52e62778a3..6e6c1714ce 100644 --- a/include/configs/hrcon.h +++ b/include/configs/hrcon.h @@ -12,100 +12,19 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ -#define CONFIG_HRCON 1 /* HRCON board specific */ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR /* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz - * We choose the A type silicon as default, so the core is 400Mhz. - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_CORE_TO_CSB_3X1) -/* - * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits - * in 8308's HRCWH according to the manual, but original Freescale's - * code has them and I've expirienced some problems using the board - * with BDI3000 attached when I've tried to set these bits to zero - * (UART doesn't work after the 'reset run' command). - */ -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_RGMII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH (\ - SICRH_ESDHC_A_SD |\ - SICRH_ESDHC_B_SD |\ - SICRH_ESDHC_C_SD |\ - SICRH_GPIO_A_GPIO |\ - SICRH_GPIO_B_GPIO |\ - SICRH_IEEE1588_A_GPIO |\ - SICRH_USB |\ - SICRH_GTM_GPIO |\ - SICRH_IEEE1588_B_GPIO |\ - SICRH_ETSEC2_GPIO |\ - SICRH_GPIOSEL_1 |\ - SICRH_TMROBI_V3P3 |\ - SICRH_TSOBI1_V2P5 |\ - SICRH_TSOBI2_V2P5) /* 0x0037f103 */ -#define CONFIG_SYS_SICRL (\ - SICRL_SPI_PF0 |\ - SICRL_UART_PF0 |\ - SICRL_IRQ_PF0 |\ - SICRL_I2C2_PF0 |\ - SICRL_ETSEC1_GTX_CLK125) /* 0x00000000 */ - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * SERDES */ #define CONFIG_FSL_SERDES #define CONFIG_FSL_SERDES1 0xe3000 /* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -192,13 +111,6 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -/* * FLASH on the Local Bus */ #if 1 @@ -210,22 +122,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -233,30 +129,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -/* - * FPGA - */ -#define CONFIG_SYS_FPGA0_BASE 0xE0600000 -#define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ - -/* Window base at FPGA base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) - -#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 #define CONFIG_SYS_FPGA_COUNT 1 @@ -515,52 +387,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* * Environment Configuration */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 7e4c497fe0..b1d01c58f9 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -14,56 +14,17 @@ /* * High Level Configuration Options */ -#define CONFIG_MPC831x -#define CONFIG_MPC8313 - #define CONFIG_FSL_ELBC #define CONFIG_BOOT_RETRY_TIME 900 #define CONFIG_BOOT_RETRY_MIN 30 #define CONFIG_RESET_TO_RETRY -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -#define CONFIG_SYS_IMMR 0xF0000000 - -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.000MHz, then - * CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz - */ -#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_CSB_TO_CLKIN_2X1 |\ - HRCWL_CORE_TO_CSB_2X1) - -#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_8BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_MII |\ - HRCWH_TSEC2M_IN_MII |\ - HRCWH_BIG_ENDIAN) - #define CONFIG_SYS_SICRH 0x00000000 #define CONFIG_SYS_SICRL (SICRL_LBC | SICRL_SPI_D) #define CONFIG_HWCONFIG -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK |\ - HID0_ENABLE_INSTRUCTION_CACHE |\ - HID0_DISABLE_DYNAMIC_POWER_MANAGMENT) - -#define CONFIG_SYS_HID2 (HID2_HBE | 0x00020000) - /* * Definitions for initial stack pointer and data area (in DCACHE ) */ @@ -76,25 +37,12 @@ #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* - * Local Bus LCRR and LBCR regs - */ -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR (0x00040000 |\ - (0xFF << LBCR_BMT_SHIFT) |\ - 0xF) - -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* * Internal Definitions */ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* * Manually set up DDR parameters, @@ -169,20 +117,7 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 #define CONFIG_SYS_FLASH_SIZE 8 -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016 -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - OR_GPCM_SCY_10 |\ - OR_GPCM_EHTR |\ - OR_GPCM_TRLX |\ - OR_GPCM_CSNT |\ - OR_GPCM_EAD) #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 @@ -200,60 +135,24 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) #define NAND_CACHE_PAGES 64 -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) |\ - (2<<BR_DECC_SHIFT) |\ - BR_PS_8 |\ - BR_MS_FCM |\ - BR_V) - -#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 |\ - OR_FCM_PGS |\ - OR_FCM_CSCT |\ - OR_FCM_CST |\ - OR_FCM_CHT |\ - OR_FCM_SCY_4 |\ - OR_FCM_TRLX |\ - OR_FCM_EHTR |\ - OR_FCM_RST) /* * MRAM setup */ #define CONFIG_SYS_MRAM_BASE 0xE2000000 #define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */ #define CONFIG_SYS_OR_TIMING_MRAM -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM 0xFFFE0C74 /* * CPLD setup */ #define CONFIG_SYS_CPLD_BASE 0xE3000000 #define CONFIG_SYS_CPLD_SIZE 0x8000 -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E #define CONFIG_SYS_OR_TIMING_MRAM -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE |\ - BR_PS_8 |\ - BR_MS_GPCM |\ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8814 /* * HW-Watchdog @@ -304,90 +203,12 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) -#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2) +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)) #define CONFIG_HAS_FSL_DR_USB #define CONFIG_SYS_SCCR_USBDRCM 3 /* - * BAT's - */ -#define CONFIG_HIGH_BATS - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE |\ - BATL_PP_10) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE |\ - BATU_BL_256M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* Initial RAM @ 0xFD000000 */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR |\ - BATL_PP_10 |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR |\ - BATU_BL_256K |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH @ 0xFF800000 */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE |\ - BATL_PP_10 |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE |\ - BATU_BL_8M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE |\ - BATL_PP_10 |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* IMMRBAR @ 0xF0000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR |\ - BATL_PP_10 |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR |\ - BATU_BL_128M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */ -#define CONFIG_SYS_IBAT6L (0xE0000000 |\ - BATL_PP_10 |\ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xE0000000 |\ - BATU_BL_256M |\ - BATU_VS |\ - BATU_VP) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -/* * U-Boot environment setup */ #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km-mpc8309.h index 0e0b1b4605..e89b7af061 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km-mpc8309.h @@ -1,26 +1,17 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2012 Keymile AG - * Gerlando Falauto <gerlando.falauto@keymile.com> - * - * Based on km8321-common.h, see respective copyright notice for credits - */ - -#ifndef __CONFIG_KM8309_COMMON_H -#define __CONFIG_KM8309_COMMON_H - /* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_QE 1 /* Has QE */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ #define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -/* include common defines/options for all 83xx Keymile boards */ -#include "km83xx-common.h" +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66000000 +#define CONFIG_SYS_CLK_FREQ 66000000 +#define CONFIG_83XX_PCICLK 66000000 /* QE microcode/firmware address */ #define CONFIG_SYS_QE_FMAN_FW_IN_NOR @@ -74,28 +65,6 @@ #define CONFIG_SYS_GP2DIR 0xFF000000 #define CONFIG_SYS_GP2ODR 0x00000000 -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ - HRCWL_DDR_TO_SCB_CLK_2X1 | \ - HRCWL_CSB_TO_CLKIN_2X1 | \ - HRCWL_CORE_TO_CSB_2X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT | \ - HRCWH_PCI_ARBITER_DISABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_NORMAL) - #define CONFIG_SYS_DDRCDR (\ DDRCDR_EN | \ DDRCDR_PZ_MAXZ | \ @@ -156,21 +125,13 @@ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP 0x80000000 -#define CONFIG_SYS_LCRR_EADC 0x00010000 -#define CONFIG_SYS_LCRR_CLKDIV 0x00000002 - -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* - * MMU Setup - */ -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#endif /* __CONFIG_KM8309_COMMON_H */ +/* ethernet port connected to piggy (UEC2) */ +#define CONFIG_HAS_ETH1 +#define CONFIG_UEC_ETH2 +#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0 +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km-mpc832x.h index 41b3ba2842..3c2173d364 100644 --- a/include/configs/km/km8321-common.h +++ b/include/configs/km/km-mpc832x.h @@ -1,65 +1,34 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu <daveliu@freescale.com> - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada <peterb@logicpd.com> - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * (C) Copyright 2008 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * (C) Copyright 2010 - * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com - * - * (C) Copyright 2010-2011 - * Thomas Reufer, KEYMILE Ltd, thomas.reufer@keymile.com - */ - -#ifndef __CONFIG_KM8321_COMMON_H -#define __CONFIG_KM8321_COMMON_H - /* * High Level Configuration Options */ #define CONFIG_QE /* Has QE */ -#define CONFIG_MPC832x /* MPC832x CPU specific */ #define CONFIG_KM8321 /* Keymile PBEC8321 board specific */ -#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" - -/* include common defines/options for all 83xx Keymile boards */ -#include "km83xx-common.h" +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66000000 +#define CONFIG_SYS_CLK_FREQ 66000000 +#define CONFIG_83XX_PCICLK 66000000 /* - * System IO Config + * QE UEC ethernet configuration */ -#define CONFIG_SYS_SICRL SICRL_IRQ_CKS +#define CONFIG_UEC_ETH1 /* GETH1 */ +#define UEC_VERBOSE_DEBUG 1 + +#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0 +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 /* - * Hardware Reset Configuration Word + * System IO Config */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ - HRCWL_DDR_TO_SCB_CLK_2X1 | \ - HRCWL_CSB_TO_CLKIN_2X1 | \ - HRCWL_CORE_TO_CSB_2_5X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X3) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_AGENT | \ - HRCWH_PCI_ARBITER_DISABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_NORMAL) +#define CONFIG_SYS_SICRL SICRL_IRQ_CKS #define CONFIG_SYS_DDRCDR (\ DDRCDR_EN | \ @@ -120,21 +89,3 @@ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP 0x80000000 -#define CONFIG_SYS_LCRR_EADC 0x00010000 -#define CONFIG_SYS_LCRR_CLKDIV 0x00000002 - -#define CONFIG_SYS_LBC_LBCR 0x00000000 - -/* - * MMU Setup - */ -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#endif /* __CONFIG_KM8321_COMMON_H */ diff --git a/include/configs/km/km-mpc8360.h b/include/configs/km/km-mpc8360.h new file mode 100644 index 0000000000..8f26e059e9 --- /dev/null +++ b/include/configs/km/km-mpc8360.h @@ -0,0 +1,91 @@ +/* KMBEC FPGA (PRIO) */ +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 64 + +/* + * High Level Configuration Options + */ +#define CONFIG_QE /* Has QE */ + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH1 /* GETH1 */ +#define UEC_VERBOSE_DEBUG 1 + +#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0 +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 + +/* + * System IO Setup + */ +#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) + +/** + * DDR RAM settings + */ +#define CONFIG_SYS_DDR_SDRAM_CFG (\ + SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_SREN | \ + SDRAM_CFG_HSE) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 + +#define CONFIG_SYS_DDR_CLK_CNTL (\ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + +#define CONFIG_SYS_DDR_INTERVAL (\ + (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x203 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f + +#define CONFIG_SYS_DDRCDR (\ + DDRCDR_EN | \ + DDRCDR_Q_DRN) +#define CONFIG_SYS_DDR_MODE 0x47860452 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 (\ + (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 (\ + (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* + * PAXE on the local bus CS3 + */ +#define CONFIG_SYS_PAXE_BASE 0xA0000000 +#define CONFIG_SYS_PAXE_SIZE 256 diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h new file mode 100644 index 0000000000..455e5236de --- /dev/null +++ b/include/configs/km/km-mpc83xx.h @@ -0,0 +1,160 @@ +/* + * Internal Definitions + */ +#define BOOTFLASH_START 0xF0000000 + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* + * DDR Setup + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ +#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */ + +#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ + DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) + +#define CFG_83XX_DDR_USES_CS0 + +/* + * Manually set up DDR parameters + */ +#define CONFIG_DDR_II +#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ + +/* + * The reserved memory + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_FLASH_BASE 0xF0000000 + +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +#define CONFIG_SYS_RAMBOOT +#endif + +/* Reserve 768 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) + +/* + * Initial RAM Base Address Setup + */ +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +/* + * Init Local Bus Memory Controller: + * + * Bank Bus Machine PortSz Size Device + * ---- --- ------- ------ ----- ------ + * 0 Local GPCM 16 bit 256MB FLASH + * 1 Local GPCM 8 bit 128MB GPIO/PIGGY + * + */ + +/* + * FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600) + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_NUM_I2C_BUSES 4 +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 200000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_SPEED 200000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ + {1, {I2C_NULL_HOP} } } + +#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ + +#if defined(CONFIG_CMD_NAND) +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE +#endif + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* + * Environment + */ + +#ifndef CONFIG_SYS_RAMBOOT +#ifndef CONFIG_ENV_ADDR +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#endif +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ +#ifndef CONFIG_ENV_OFFSET +#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) +#endif + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#else /* CFG_SYS_RAMBOOT */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#endif /* CFG_SYS_RAMBOOT */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif + +#ifndef CONFIG_KM_DEF_ARCH +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_DEF_ARCH \ + "newenv=" \ + "prot off " __stringify(CONFIG_ENV_ADDR) " +0x40000 && " \ + "era " __stringify(CONFIG_ENV_ADDR) " +0x40000\0" \ + "unlock=yes\0" \ + "" + +#if defined(CONFIG_UEC_ETH) +#define CONFIG_HAS_ETH0 +#endif + +/* + * QE UEC ethernet configuration + */ +#define CONFIG_UEC_ETH +#define CONFIG_ETHPRIME "UEC0" diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h deleted file mode 100644 index a76f606e3e..0000000000 --- a/include/configs/km/km83xx-common.h +++ /dev/null @@ -1,296 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_KM83XX_H -#define __CONFIG_KM83XX_H - -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" -#include "km-powerpc.h" - -/* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 66000000 -#define CONFIG_SYS_CLK_FREQ 66000000 -#define CONFIG_83XX_PCICLK 66000000 - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* - * Bus Arbitration Configuration Register (ACR) - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* pipeline depth 4 transactions */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* 4 consecutive transactions */ -#define CONFIG_SYS_ACR_APARK 0 /* park bus to master (below) */ -#define CONFIG_SYS_ACR_PARKM 3 /* parking master = QuiccEngine */ - -/* - * DDR Setup - */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_SDRAM_BASE2 (CONFIG_SYS_SDRAM_BASE + 0x10000000) /* +256M */ - -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CFG_83XX_DDR_USES_CS0 - -/* - * Manually set up DDR parameters - */ -#define CONFIG_DDR_II -#define CONFIG_SYS_DDR_SIZE 2048 /* MB */ - -/* - * The reserved memory - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#define CONFIG_SYS_FLASH_BASE 0xF0000000 - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT -#endif - -/* Reserve 768 kB for Mon */ -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) - -/* - * Initial RAM Base Address Setup - */ -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* - * Init Local Bus Memory Controller: - * - * Bank Bus Machine PortSz Size Device - * ---- --- ------- ------ ----- ------ - * 0 Local GPCM 16 bit 256MB FLASH - * 1 Local GPCM 8 bit 128MB GPIO/PIGGY - * - */ -/* - * FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -/* - * PRIO1/PIGGY on the local bus CS1 - */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_KMBEC_FPGA_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_KMBEC_FPGA_BASE | \ - BR_PS_8 | /* 8 bit port size */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_KMBEC_FPGA_SIZE) | \ - OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | OR_GPCM_EAD) - -/* - * Serial Port - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) - -/* - * QE UEC ethernet configuration - */ -#define CONFIG_UEC_ETH -#define CONFIG_ETHPRIME "UEC0" - -#if !defined(CONFIG_MPC8309) -#define CONFIG_UEC_ETH1 /* GETH1 */ -#define UEC_VERBOSE_DEBUG 1 -#endif - -#ifdef CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR 0 -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif - -/* - * Environment - */ - -#ifndef CONFIG_SYS_RAMBOOT -#ifndef CONFIG_ENV_ADDR -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#endif -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ -#ifndef CONFIG_ENV_OFFSET -#define CONFIG_ENV_OFFSET (CONFIG_SYS_MONITOR_LEN) -#endif - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#else /* CFG_SYS_RAMBOOT */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) -#define CONFIG_ENV_SIZE 0x2000 -#endif /* CFG_SYS_RAMBOOT */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_NUM_I2C_BUSES 4 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 200000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 200000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {1, {I2C_NULL_HOP} } } - -#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE -#endif - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR & PCI IO: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* PRIO1, PIGGY: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_KMBEC_FPGA_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_KMBEC_FPGA_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U - -/* - * Internal Definitions - */ -#define BOOTFLASH_START 0xF0000000 - -#define CONFIG_KM_CONSOLE_TTY "ttyS0" - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -#ifndef CONFIG_KM_DEF_ARCH -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ARCH \ - "newenv=" \ - "prot off "__stringify(CONFIG_ENV_ADDR)" +0x40000 && " \ - "era "__stringify(CONFIG_ENV_ADDR)" +0x40000\0" \ - "unlock=yes\0" \ - "" - -#if defined(CONFIG_UEC_ETH) -#define CONFIG_HAS_ETH0 -#endif - -#endif /* __CONFIG_KM83XX_H */ diff --git a/include/configs/km8360.h b/include/configs/km8360.h deleted file mode 100644 index feb8a9a16d..0000000000 --- a/include/configs/km8360.h +++ /dev/null @@ -1,271 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012 - * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com> - * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com> - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* KMBEC FPGA (PRIO) */ -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 64 - -#if defined CONFIG_KMETER1 -#define CONFIG_HOSTNAME "kmeter1" -#define CONFIG_KM_BOARD_NAME "kmeter1" -#define CONFIG_KM_DEF_NETDEV "netdev=eth2\0" -#elif defined CONFIG_KMCOGE5NE -#define CONFIG_HOSTNAME "kmcoge5ne" -#define CONFIG_KM_BOARD_NAME "kmcoge5ne" -#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" -#define CONFIG_NAND_ECC_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" -#else -#error ("Board not supported") -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_QE /* Has QE */ -#define CONFIG_MPC8360 /* MPC8360 CPU specific */ - -/* include common defines/options for all 83xx Keymile boards */ -#include "km/km83xx-common.h" - -/* - * System IO Setup - */ -#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) - -/* - * Hardware Reset Configuration Word - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_CSB_TO_CLKIN_4X1 | \ - HRCWL_CORE_TO_CSB_2X1 | \ - HRCWL_CE_PLL_VCO_DIV_2 | \ - HRCWL_CE_TO_PLL_1X6) - -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE | \ - HRCWH_SW_WATCHDOG_DISABLE | \ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_EARLY | \ - HRCWH_LDP_CLEAR) - -/** - * DDR RAM settings - */ -#define CONFIG_SYS_DDR_SDRAM_CFG (\ - SDRAM_CFG_SDRAM_TYPE_DDR2 | \ - SDRAM_CFG_SREN | \ - SDRAM_CFG_HSE) - -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 - -#ifdef CONFIG_KMCOGE5NE -/** - * KMCOGE5NE has 512 MB RAM - */ -#define CONFIG_SYS_DDR_CS0_CONFIG (\ - CSCONFIG_EN | \ - CSCONFIG_AP | \ - CSCONFIG_ODT_WR_ONLY_CURRENT | \ - CSCONFIG_BANK_BIT_3 | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10) -#else -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ - CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_ODT_WR_ONLY_CURRENT) -#endif - -#define CONFIG_SYS_DDR_CLK_CNTL (\ - DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) - -#define CONFIG_SYS_DDR_INTERVAL (\ - (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ - (0x203 << SDRAM_INTERVAL_REFINT_SHIFT)) - -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f - -#define CONFIG_SYS_DDRCDR (\ - DDRCDR_EN | \ - DDRCDR_Q_DRN) -#define CONFIG_SYS_DDR_MODE 0x47860452 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 - -#define CONFIG_SYS_DDR_TIMING_0 (\ - (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ - (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ - (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ - (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ - (0 << TIMING_CFG0_WWT_SHIFT) | \ - (0 << TIMING_CFG0_RRT_SHIFT) | \ - (0 << TIMING_CFG0_WRT_SHIFT) | \ - (0 << TIMING_CFG0_RWT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ - (2 << TIMING_CFG1_WRTORD_SHIFT) | \ - (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ - (3 << TIMING_CFG1_WRREC_SHIFT) | \ - (7 << TIMING_CFG1_REFREC_SHIFT) | \ - (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ - (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ - (3 << TIMING_CFG1_PRETOACT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_2 (\ - (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \ - (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ - (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ - (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ - (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ - (5 << TIMING_CFG2_CPO_SHIFT) | \ - (0 << TIMING_CFG2_ADD_LAT_SHIFT)) - -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_2 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 - -/* - * PAXE on the local bus CS3 - */ -#define CONFIG_SYS_PAXE_BASE 0xA0000000 -#define CONFIG_SYS_PAXE_SIZE 256 - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_PAXE_BASE - -#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000001C /* 512MB window size */ - -#define CONFIG_SYS_BR3_PRELIM (\ - CONFIG_SYS_PAXE_BASE | \ - (1 << BR_PS_SHIFT) | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (\ - MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX | \ - OR_GPCM_EAD) - -#ifdef CONFIG_KMCOGE5NE -/* - * BFTIC3 on the local bus CS4 - */ -#define CONFIG_SYS_BFTIC3_BASE 0xB0000000 -#define CONFIG_SYS_BFTIC3_SIZE 256 - -#define CONFIG_SYS_BR4_PRELIM (\ - CONFIG_SYS_BFTIC3_BASE |\ - (1 << BR_PS_SHIFT) | \ - BR_V) - -#define CONFIG_SYS_OR4_PRELIM (\ - MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 |\ - OR_GPCM_SCY_2 |\ - OR_GPCM_TRLX |\ - OR_GPCM_EAD) -#endif - -/* - * MMU Setup - */ - -/* PAXE: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (\ - CONFIG_SYS_PAXE_BASE | \ - BATL_PP_10 | \ - BATL_MEMCOHERENCE) - -#define CONFIG_SYS_IBAT5U (\ - CONFIG_SYS_PAXE_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) - -#define CONFIG_SYS_DBAT5L (\ - CONFIG_SYS_PAXE_BASE | \ - BATL_PP_10 | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#ifdef CONFIG_KMCOGE5NE -/* BFTIC3: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT6L (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATL_PP_10 | \ - BATL_MEMCOHERENCE) - -#define CONFIG_SYS_IBAT6U (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) - -#define CONFIG_SYS_DBAT6L (\ - CONFIG_SYS_BFTIC3_BASE | \ - BATL_PP_10 | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* DDR/LBC SDRAM next 256M: cacheable */ -#define CONFIG_SYS_IBAT7L (\ - CONFIG_SYS_SDRAM_BASE2 |\ - BATL_PP_10 |\ - BATL_CACHEINHIBIT |\ - BATL_GUARDEDSTORAGE) - -#define CONFIG_SYS_IBAT7U (\ - CONFIG_SYS_SDRAM_BASE2 |\ - BATU_BL_256M |\ - BATU_VS |\ - BATU_VP) -/* enable POST tests */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) -#define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ -#define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END -#define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ -#define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ - -#else -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#endif - -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - -#endif /* CONFIG */ diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h new file mode 100644 index 0000000000..fc78b27cbb --- /dev/null +++ b/include/configs/kmcoge5ne.h @@ -0,0 +1,60 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2012 + * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com> + * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_HOSTNAME "kmcoge5ne" +#define CONFIG_KM_BOARD_NAME "kmcoge5ne" +#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" +#define CONFIG_NAND_ECC_BCH +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ + +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc8360.h" + +/* + * System Clock Setup + */ +#define CONFIG_83XX_CLKIN 66000000 +#define CONFIG_SYS_CLK_FREQ 66000000 +#define CONFIG_83XX_PCICLK 66000000 + +/** + * KMCOGE5NE has 512 MB RAM + */ +#define CONFIG_SYS_DDR_CS0_CONFIG (\ + CSCONFIG_EN | \ + CSCONFIG_AP | \ + CSCONFIG_ODT_WR_ONLY_CURRENT | \ + CSCONFIG_BANK_BIT_3 | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) + +/* + * BFTIC3 on the local bus CS4 + */ +#define CONFIG_SYS_BFTIC3_BASE 0xB0000000 +#define CONFIG_SYS_BFTIC3_SIZE 256 + +/* enable POST tests */ +#define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) +#define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ +#define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END +#define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ +#define CONFIG_TESTPIN_MASK 0x20 /* for kmcoge5ne */ + +#endif /* CONFIG */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h new file mode 100644 index 0000000000..bfa7ca27c7 --- /dev/null +++ b/include/configs/kmeter1.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2012 + * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com> + * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_HOSTNAME "kmeter1" +#define CONFIG_KM_BOARD_NAME "kmeter1" +#define CONFIG_KM_DEF_NETDEV "netdev=eth2\0" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc8360.h" + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 + +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10 | \ + CSCONFIG_ODT_WR_ONLY_CURRENT) +#endif /* CONFIG */ diff --git a/include/configs/kmopti2.h b/include/configs/kmopti2.h new file mode 100644 index 0000000000..67e864fc98 --- /dev/null +++ b/include/configs/kmopti2.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010-2013 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_KM_BOARD_NAME "kmopti2" +#define CONFIG_HOSTNAME "kmopti2" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/kmsupx5.h b/include/configs/kmsupx5.h new file mode 100644 index 0000000000..ba33e6074b --- /dev/null +++ b/include/configs/kmsupx5.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010-2013 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_KM_BOARD_NAME "kmsupx5" +#define CONFIG_HOSTNAME "kmsupx5" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h new file mode 100644 index 0000000000..701eb53f63 --- /dev/null +++ b/include/configs/kmtegr1.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_HOSTNAME "kmtegr1" +#define CONFIG_KM_BOARD_NAME "kmtegr1" +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +#define CONFIG_ENV_ADDR 0xF0100000 +#define CONFIG_ENV_OFFSET 0x100000 + +#define CONFIG_NAND_ECC_BCH +#define CONFIG_NAND_KMETER1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc8309.h" + +/* must be after the include because KMBEC_FPGA is otherwise undefined */ +#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/kmtepr2.h b/include/configs/kmtepr2.h new file mode 100644 index 0000000000..e0c907d11a --- /dev/null +++ b/include/configs/kmtepr2.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010-2013 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_KM_BOARD_NAME "kmtepr2" +#define CONFIG_HOSTNAME "kmtepr2" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h new file mode 100644 index 0000000000..6e5d50700c --- /dev/null +++ b/include/configs/kmvect1.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2010 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_HOSTNAME "kmvect1" +#define CONFIG_KM_BOARD_NAME "kmvect1" +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc8309.h" + +#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ + 0x0000c000 | \ + MxMR_WLFx_2X) +/* + * QE UEC ethernet configuration + */ +#define CONFIG_MV88E6352_SWITCH +#define CONFIG_KM_MVEXTSW_ADDR 0x10 + +/* ethernet port connected to simple switch 88e6122 (UEC0) */ +#define CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 + +#define CONFIG_FIXED_PHY 0xFFFFFFFF +#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ +#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ + {devnum, speed, duplex} +#define CONFIG_SYS_FIXED_PHY_PORTS \ + CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) + +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 + +#endif /* __CONFIG_H */ diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 98f030388c..3ce4b705b7 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -12,8 +12,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ /* * On-board devices @@ -23,69 +21,6 @@ #define CONFIG_TSEC1 #define CONFIG_TSEC2 -/* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz - * We choose the A type silicon as default, so the core is 400Mhz. - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_CORE_TO_CSB_3X1) -/* - * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits - * in 8308's HRCWH according to the manual, but original Freescale's - * code has them and I've expirienced some problems using the board - * with BDI3000 attached when I've tried to set these bits to zero - * (UART doesn't work after the 'reset run' command). - */ -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_MII |\ - HRCWH_TSEC2M_IN_MII |\ - HRCWH_BIG_ENDIAN) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH (\ - SICRH_ESDHC_A_GPIO |\ - SICRH_ESDHC_B_GPIO |\ - SICRH_ESDHC_C_GTM |\ - SICRH_GPIO_A_TSEC2 |\ - SICRH_GPIO_B_TSEC2_TX_CLK |\ - SICRH_IEEE1588_A_GPIO |\ - SICRH_USB |\ - SICRH_GTM_GPIO |\ - SICRH_IEEE1588_B_GPIO |\ - SICRH_ETSEC2_CRS |\ - SICRH_GPIOSEL_1 |\ - SICRH_TMROBI_V3P3 |\ - SICRH_TSOBI1_V3P3 |\ - SICRH_TSOBI2_V3P3) /* 0xf577d100 */ -#define CONFIG_SYS_SICRL (\ - SICRL_SPI_PF0 |\ - SICRL_UART_PF0 |\ - SICRL_IRQ_PF0 |\ - SICRL_I2C2_PF0 |\ - SICRL_ETSEC1_TX_CLK) /* 0x00000000 */ - #define CONFIG_SYS_GPIO1_PRELIM /* GPIO Default input/output settings */ #define CONFIG_SYS_GPIO1_DIR 0x7AAF8C00 @@ -96,29 +31,15 @@ #define CONFIG_SYS_GPIO1_DAT 0x08008C00 /* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * SERDES */ #define CONFIG_FSL_SERDES #define CONFIG_FSL_SERDES1 0xe3000 /* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -205,13 +126,6 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -/* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -219,22 +133,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFC000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 64 /* FLASH size is 64M */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_4 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 @@ -248,33 +146,13 @@ * SJA1000 CAN controller on Local Bus */ #define CONFIG_SYS_SJA1000_BASE 0xFBFF0000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_SJA1000_BASE \ - | BR_PS_8 /* 8 bit port size */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_EHTR_SET) - /* 0xFFFF8052 */ - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_SJA1000_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + /* * CPLD on Local Bus */ #define CONFIG_SYS_CPLD_BASE 0xFBFF8000 -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_CPLD_BASE \ - | BR_PS_8 /* 8 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB \ - | OR_GPCM_SCY_4 \ - | OR_GPCM_EHTR_SET) - /* 0xFFFF8042 */ - -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) + /* * Serial Port @@ -386,52 +264,6 @@ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* * Environment Configuration */ diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 9074be80f1..d2053cc059 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -18,36 +18,10 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC834x 1 /* MPC834x family */ -#define CONFIG_MPC8349 1 /* MPC8349 specific */ /* Don't enable PCI2 on sbc834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ -/* - * The default if PCI isn't enabled, or if no PCI clk setting is given - * is 66MHz; this is what the board defaults to when the PCI slot is - * physically empty. The board will automatically (i.e w/o jumpers) - * clock down to 33MHz if you insert a 33MHz PCI card. - */ -#ifdef CONFIG_PCI_33M -#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ -#else /* 66M */ -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#ifdef CONFIG_PCI_33M -#define CONFIG_SYS_CLK_FREQ 33000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 -#else /* 66M */ -#define CONFIG_SYS_CLK_FREQ 66000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 -#endif -#endif - -#define CONFIG_SYS_IMMR 0xE0000000 - #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00100000 @@ -72,9 +46,7 @@ */ #undef CONFIG_DDR_32BIT -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) #define CONFIG_DDR_2T_TIMING @@ -122,25 +94,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 8 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xFF806FF7 */ - - /* window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 64 /* sectors per device */ @@ -170,88 +123,8 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserved for malloc */ -/* - * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ -#ifdef CONFIG_SYS_LB_SDRAM -/* Local bus BR2, OR2 definition for SDRAM if soldered on the board*/ -/* - * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. - * - * For BR2, need: - * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 - * port-size = 32-bits = BR2[19:20] = 11 - * no parity checking = BR2[21:22] = 00 - * SDRAM for MSEL = BR2[24:26] = 011 - * Valid = BR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 - */ - -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_LBC_SDRAM_BASE \ - | BR_PS_32 \ - | BR_MS_SDRAM \ - | BR_V) - /* 0xF0001861 */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_LBC_SDRAM_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_64MB) - -/* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. - * - * For OR2, need: - * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 - * 9 columns OR2[19-21] = 010 - * 13 rows OR2[23-25] = 100 - * EAD set for extra time OR[31] = 1 - * - * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 - */ - -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_LBC_SDRAM_SIZE) \ - | OR_SDRAM_XAM \ - | ((9 - OR_SDRAM_MIN_COLS) << OR_SDRAM_COLS_SHIFT) \ - | ((13 - OR_SDRAM_MIN_ROWS) << OR_SDRAM_ROWS_SHIFT) \ - | OR_SDRAM_EAD) - /* 0xFC006901 */ - - /* LB sdram refresh timer, about 6us */ -#define CONFIG_SYS_LBC_LSRT 0x32000000 - /* LB refresh timer prescal, 266MHz/32 */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -#define CONFIG_SYS_LBC_LSDMR_COMMON (LSDMR_RFEN \ - | LSDMR_BSMA1516 \ - | LSDMR_RFCR8 \ - | LSDMR_PRETOACT6 \ - | LSDMR_ACTTORW3 \ - | LSDMR_BL8 \ - | LSDMR_WRC3 \ - | LSDMR_CL3) - -/* - * SDRAM Controller configuration sequence. - */ -#define CONFIG_SYS_LBC_LSDMR_1 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) -#define CONFIG_SYS_LBC_LSDMR_2 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_3 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) -#define CONFIG_SYS_LBC_LSDMR_4 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) -#define CONFIG_SYS_LBC_LSDMR_5 (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_NORMAL) -#endif - /* * Serial Port */ @@ -309,14 +182,6 @@ #if defined(CONFIG_PCI) -#define PCI_64BIT -#define PCI_ONE_PCI1 -#if defined(PCI_64BIT) -#undef PCI_ALL_PCI1 -#undef PCI_TWO_PCI1 -#undef PCI_ONE_PCI1 -#endif - #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -400,185 +265,14 @@ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ -#if 1 /*528/264*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) -#elif 0 /*396/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_3X1) -#elif 0 /*264/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_2X1) -#elif 0 /*132/132*/ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_1X1) -#elif 0 /*264/264 */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X4 |\ - HRCWL_CORE_TO_CSB_1X1) -#endif - -#if defined(PCI_64BIT) -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_64_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* System IO Config */ #define CONFIG_SYS_SICRH 0 #define CONFIG_SYS_SICRL SICRL_LDP_A -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK \ - | HID0_ENABLE_INSTRUCTION_CACHE) - -/* #define CONFIG_SYS_HID0_FINAL (\ - HID0_ENABLE_INSTRUCTION_CACHE |\ - HID0_ENABLE_M_BIT |\ - HID0_ENABLE_ADDRESS_BROADCAST) */ - -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* PCI @ 0x80000000 */ #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L (0) -#define CONFIG_SYS_IBAT1U (0) -#define CONFIG_SYS_IBAT2L (0) -#define CONFIG_SYS_IBAT2U (0) #endif -#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) -#endif - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* LBC SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_LBC_SDRAM_BASE \ - | BATL_PP_RW \ - | BATL_MEMCOHERENCE \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_LBC_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index e9e264b40b..d1535b6fac 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -45,7 +45,6 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/ #undef CONFIG_DDR_ECC /* only for ECC DDR module */ diff --git a/include/configs/strider.h b/include/configs/strider.h index 972543d6bd..8b942e3446 100644 --- a/include/configs/strider.h +++ b/include/configs/strider.h @@ -12,100 +12,19 @@ * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 family */ -#define CONFIG_MPC83xx 1 /* MPC83xx family */ -#define CONFIG_MPC830x 1 /* MPC830x family */ -#define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ -#define CONFIG_STRIDER 1 /* STRIDER board specific */ #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR /* - * System Clock Setup - */ -#define CONFIG_83XX_CLKIN 33333333 /* in Hz */ -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -/* - * Hardware Reset Configuration Word - * if CLKIN is 66.66MHz, then - * CSB = 133MHz, DDRC = 266MHz, LBC = 133MHz - * We choose the A type silicon as default, so the core is 400Mhz. - */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_2X1 |\ - HRCWL_SVCOD_DIV_2 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ - HRCWL_CORE_TO_CSB_3X1) -/* - * There are neither HRCWH_PCI_HOST nor HRCWH_PCI1_ARBITER_ENABLE bits - * in 8308's HRCWH according to the manual, but original Freescale's - * code has them and I've expirienced some problems using the board - * with BDI3000 attached when I've tried to set these bits to zero - * (UART doesn't work after the 'reset run' command). - */ -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0XFFF00100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_RL_EXT_LEGACY |\ - HRCWH_TSEC1M_IN_MII |\ - HRCWH_TSEC2M_IN_RGMII |\ - HRCWH_BIG_ENDIAN) - -/* - * System IO Config - */ -#define CONFIG_SYS_SICRH (\ - SICRH_ESDHC_A_SD |\ - SICRH_ESDHC_B_SD |\ - SICRH_ESDHC_C_SD |\ - SICRH_GPIO_A_GPIO |\ - SICRH_GPIO_B_GPIO |\ - SICRH_IEEE1588_A_GPIO |\ - SICRH_USB |\ - SICRH_GTM_GPIO |\ - SICRH_IEEE1588_B_GPIO |\ - SICRH_ETSEC2_GPIO |\ - SICRH_GPIOSEL_1 |\ - SICRH_TMROBI_V3P3 |\ - SICRH_TSOBI1_V2P5 |\ - SICRH_TSOBI2_V2P5) /* 0x0037f103 */ -#define CONFIG_SYS_SICRL (\ - SICRL_SPI_PF0 |\ - SICRL_UART_PF0 |\ - SICRL_IRQ_PF0 |\ - SICRL_I2C2_PF0 |\ - SICRL_ETSEC1_TX_CLK) /* 0x00000000 */ - -/* - * IMMR new address - */ -#define CONFIG_SYS_IMMR 0xE0000000 - -/* * SERDES */ #define CONFIG_FSL_SERDES #define CONFIG_FSL_SERDES1 0xe3000 /* - * Arbiter Setup - */ -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ -#define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC emergency priority is highest */ - -/* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ | DDRCDR_PZ_LOZ \ @@ -192,13 +111,6 @@ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* - * Local Bus Configuration & Clock Setup - */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -/* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT @@ -208,22 +120,6 @@ #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ #define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_8MB) - -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 135 @@ -231,29 +127,6 @@ #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -/* - * FPGA - */ -#define CONFIG_SYS_FPGA0_BASE 0xE0600000 -#define CONFIG_SYS_FPGA0_SIZE 1 /* FPGA size is 1M */ - -/* Window base at FPGA base */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_FPGA0_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_1MB) - -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FPGA0_BASE \ - | BR_PS_16 /* 16 bit port */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_OR1_PRELIM (MEG_TO_AM(CONFIG_SYS_FPGA0_SIZE) \ - | OR_UPM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX_CLEAR \ - | OR_GPCM_EHTR_CLEAR) - -#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE #define CONFIG_SYS_FPGA_DONE(k) 0x0010 #define CONFIG_SYS_FPGA_COUNT 1 @@ -547,52 +420,6 @@ void fpga_control_clear(unsigned int bus, int pin); #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ /* - * Core HID Setup - */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE | \ - HID0_ENABLE_DYNAMIC_POWER_MANAGMENT) -#define CONFIG_SYS_HID2 HID2_HBE - -/* - * MMU Setup - */ - -/* DDR: cache cacheable */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U - -/* IMMRBAR, PCI IO and FPGA: cache-inhibit and guarded */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_IMMR | BATU_BL_8M | BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U - -/* FLASH: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE | BATU_BL_8M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U - -/* Stack in dcache: cacheable, no memory coherence */ -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* * Environment Configuration */ diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index 3e88c9000c..1705f9cafb 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -20,171 +20,16 @@ * High Level Configuration Options */ -/* This needs to be set prior to including km/km83xx-common.h */ - -#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ #define CONFIG_HOSTNAME "suvd3" -#define CONFIG_KM_BOARD_NAME "suvd3" -/* include common defines/options for all 8321 Keymile boards */ -#include "km/km8321-common.h" - -#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ -#define CONFIG_HOSTNAME "kmvect1" -#define CONFIG_KM_BOARD_NAME "kmvect1" -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" - -#elif defined(CONFIG_KMTEGR1) /* TEGR1 board specific */ -#define CONFIG_HOSTNAME "kmtegr1" -#define CONFIG_KM_BOARD_NAME "kmtegr1" -#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" -#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" - -#define CONFIG_ENV_ADDR 0xF0100000 -#define CONFIG_ENV_OFFSET 0x100000 - -#define CONFIG_NAND_ECC_BCH -#define CONFIG_NAND_KMETER1 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 - -/* include common defines/options for all 8309 Keymile boards */ -#include "km/km8309-common.h" -/* must be after the include because KMBEC_FPGA is otherwise undefined */ -#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ - -#else -#error Supported boards are: SUVD3, KMVECT1, KMTEGR1 -#endif - -#define CONFIG_SYS_APP1_BASE 0xA0000000 -#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#define CONFIG_SYS_APP2_BASE 0xB0000000 -#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ - -/* EEprom support */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 - -/* - * Init Local Bus Memory Controller: - * - * Bank Bus Machine PortSz Size Device - * ---- --- ------- ------ ----- ------ - * 2 Local UPMA 16 bit 256MB APP1 - * 3 Local GPCM 16 bit 256MB APP2 - * - */ - -#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) -/* - * APP1 on the local bus CS2 - */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_16 | \ - BR_MS_UPMA | \ - BR_V) -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE)) +#define CONFIG_KM_BOARD_NAME "suvd3" -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_3 | \ - OR_GPCM_TRLX_SET) +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) - -#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_SCY_5 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) - -#endif /* CONFIG_KMTEGR1 */ - -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -/* - * MMU Setup - */ -#if defined(CONFIG_SUVD3) || defined(CONFIG_KMVECT1) -/* APP1: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#elif defined(CONFIG_KMTEGR1) -#define CONFIG_SYS_IBAT5L (0) -#define CONFIG_SYS_IBAT5U (0) -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#endif /* CONFIG_KMTEGR1 */ - -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -/* - * QE UEC ethernet configuration - */ -#if defined(CONFIG_KMVECT1) -#define CONFIG_MV88E6352_SWITCH -#define CONFIG_KM_MVEXTSW_ADDR 0x10 - -/* ethernet port connected to simple switch 88e6122 (UEC0) */ -#define CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 - -#define CONFIG_FIXED_PHY 0xFFFFFFFF -#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ -#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ - {devnum, speed, duplex} -#define CONFIG_SYS_FIXED_PHY_PORTS \ - CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) - -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 */ - -#if defined(CONFIG_KMVECT1) || defined(CONFIG_KMTEGR1) -/* ethernet port connected to piggy (UEC2) */ -#define CONFIG_HAS_ETH1 -#define CONFIG_UEC_ETH2 -#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 -#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC2_PHY_ADDR 0 -#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII -#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 -#endif /* CONFIG_KMVECT1 || CONFIG_KMTEGR1 */ - #endif /* __CONFIG_H */ diff --git a/include/configs/tuge1.h b/include/configs/tuge1.h new file mode 100644 index 0000000000..808538ef9d --- /dev/null +++ b/include/configs/tuge1.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. + * Dave Liu <daveliu@freescale.com> + * + * Copyright (C) 2007 Logic Product Development, Inc. + * Peter Barada <peterb@logicpd.com> + * + * Copyright (C) 2007 MontaVista Software, Inc. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * (C) Copyright 2008 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2010-2013 + * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com + * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_KM_BOARD_NAME "tuge1" +#define CONFIG_HOSTNAME "tuge1" + +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index f22d73b8d3..0eb673a947 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -23,174 +23,17 @@ /* * High Level Configuration Options */ -#if defined(CONFIG_KMSUPX5) -#define CONFIG_KM_BOARD_NAME "kmsupx5" -#define CONFIG_HOSTNAME "kmsupx5" -#elif defined(CONFIG_TUGE1) -#define CONFIG_KM_BOARD_NAME "tuge1" -#define CONFIG_HOSTNAME "tuge1" -#elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */ #define CONFIG_KM_BOARD_NAME "tuxx1" #define CONFIG_HOSTNAME "tuxx1" -#elif defined(CONFIG_KMOPTI2) -#define CONFIG_KM_BOARD_NAME "kmopti2" -#define CONFIG_HOSTNAME "kmopti2" -#elif defined(CONFIG_KMTEPR2) -#define CONFIG_KM_BOARD_NAME "kmtepr2" -#define CONFIG_HOSTNAME "kmtepr2" -#else -#error ("Board not supported") -#endif -/* include common defines/options for all 8321 Keymile boards */ -#include "km/km8321-common.h" - -#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ -#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) -#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ -#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ -#endif - -/* - * Init Local Bus Memory Controller: - * Device on board - * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 - * ----------------------------------------------------------------------------- - * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE - * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) - * - * Device on board (continued) - * Bank Bus Machine PortSz Size KMTEPR2 - * ----------------------------------------------------------------------------- - * 2 Local GPCM 8 bit 256MB NVRAM - * 3 Local GPCM 8 bit 256MB TEP2 (16 bit) - */ - -#if defined(CONFIG_KMTEPRO2) -/* - * Configuration for C2 (NVRAM) on the local bus - */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_XACS | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_SET | \ - OR_GPCM_EAD) -#else -/* - * Configuration for C2 on the local bus - */ -/* Window base at flash base */ -#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_APP1_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR2_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_APP1_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_APP1_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV4 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR | \ - OR_GPCM_EAD) -#endif - -#if defined(CONFIG_TUXX1) -/* - * Configuration for C3 on the local bus - */ -/* Access window base at PINC3 base */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -/* Window size: 256 MB */ -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) - -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_8 | \ - BR_MS_GPCM | \ - BR_V) - -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_CSNT | \ - OR_GPCM_ACS_DIV2 | \ - OR_GPCM_SCY_2 | \ - OR_GPCM_TRLX_SET | \ - OR_GPCM_EHTR_CLEAR) +/* include common defines/options for all Keymile boards */ +#include "km/keymile-common.h" +#include "km/km-powerpc.h" +#include "km/km-mpc83xx.h" +#include "km/km-mpc832x.h" #define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ 0x0000c000 | \ MxMR_WLFx_2X) -#endif - -#if defined(CONFIG_KMOPTI2) || defined(CONFIG_KMTEPR2) -/* - * Configuration for C3 on the local bus - */ -#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE -#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) -#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ - BR_PS_16 | \ - BR_MS_GPCM | \ - BR_V) -#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ - OR_GPCM_SCY_4 | \ - OR_GPCM_TRLX_CLEAR | \ - OR_GPCM_EHTR_CLEAR) -#endif - -/* - * MMU Setup - */ -/* APP1: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_APP1_BASE | \ - BATL_PP_RW | \ - BATL_MEMCOHERENCE) -/* 512M should also include APP2... */ -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_APP1_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT5L (CONFIG_SYS_APP1_BASE | \ - BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U - -#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5) -#define CONFIG_SYS_IBAT6L (0) -#define CONFIG_SYS_IBAT6U (0) -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#else -/* APP2: icache cacheable, but dcache-inhibit and guarded */ -#define CONFIG_SYS_IBAT6L (CONFIG_SYS_APP2_BASE | \ - BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (CONFIG_SYS_APP2_BASE | \ - BATU_BL_256M | \ - BATU_VS | \ - BATU_VP) -#define CONFIG_SYS_DBAT6L (CONFIG_SYS_APP2_BASE | \ - BATL_PP_RW | \ - BATL_CACHEINHIBIT | \ - BATL_GUARDEDSTORAGE) -#endif -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U - -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U #endif /* __CONFIG_H */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index 85f678e5c4..66f771d818 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -16,8 +16,6 @@ * High Level Configuration Options */ #define CONFIG_E300 1 -#define CONFIG_MPC831x 1 -#define CONFIG_MPC8313 1 #define CONFIG_PCI_INDIRECT_BRIDGE 1 #define CONFIG_FSL_ELBC 1 @@ -26,18 +24,9 @@ * On-board devices * */ -#define CONFIG_83XX_CLKIN 32000000 /* in Hz */ - -#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN - -#define CONFIG_SYS_IMMR 0xE0000000 - #define CONFIG_SYS_MEMTEST_START 0x00001000 #define CONFIG_SYS_MEMTEST_END 0x07000000 -#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */ -#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */ - /* * Device configurations */ @@ -45,9 +34,7 @@ /* * DDR Setup */ -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory*/ /* * Manually set up DDR parameters, as this board does not @@ -117,21 +104,6 @@ #define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ -#define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ - | BR_PS_16 /* 16 bit */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV4 \ - | OR_GPCM_SCY_5 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EAD) - /* 0xfe000c55 */ - -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) - #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ @@ -157,16 +129,6 @@ #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* - * Local Bus LCRR and LBCR regs - */ -#define CONFIG_SYS_LCRR_EADC LCRR_EADC_3 -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 - -#define CONFIG_SYS_LBC_LBCR 0x00040000 - -#define CONFIG_SYS_LBC_MRTPR 0x20000000 - -/* * NAND settings */ #define CONFIG_SYS_NAND_BASE 0x61000000 @@ -174,58 +136,13 @@ #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 -#define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ - | BR_PS_8 \ - | BR_DECC_CHK_GEN \ - | BR_MS_FCM \ - | BR_V) /* valid */ - /* 0x61000c21 */ -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ - | OR_FCM_BCTLD \ - | OR_FCM_CHT \ - | OR_FCM_SCY_2 \ - | OR_FCM_RST \ - | OR_FCM_TRLX) - /* 0xffff90ac */ - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM - -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) - -#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM -#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM - -/* CS2 NvRAM */ -#define CONFIG_SYS_BR2_PRELIM (0x60000000 \ - | BR_PS_8 \ - | BR_V) - /* 0x60000801 */ -#define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_3 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfffe0937 */ -/* local bus read write buffer mapping SRAM@0x64000000 */ -#define CONFIG_SYS_BR3_PRELIM (0x62000000 \ - | BR_PS_16 \ - | BR_V) - /* 0x62001001 */ - -#define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB \ - | OR_GPCM_CSNT \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xfe0009f7 */ + + +/* Still needed for spl_minimal.c */ +#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM +#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM + + /* * Serial Port @@ -315,25 +232,6 @@ /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -/* 0x64050000 */ -#define CONFIG_SYS_HRCW_LOW (\ - 0x20000000 /* reserved, must be set */ |\ - HRCWL_DDRCM |\ - HRCWL_CSB_TO_CLKIN_4X1 | \ - HRCWL_CORE_TO_CSB_2_5X1) - -/* 0xa0600004 */ -#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \ - HRCWH_PCI_ARBITER_ENABLE | \ - HRCWH_CORE_ENABLE | \ - HRCWH_FROM_0X00000100 | \ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT | \ - HRCWH_TSEC1M_IN_MII | \ - HRCWH_BIG_ENDIAN | \ - HRCWH_LALE_EARLY) - /* System IO Config */ #define CONFIG_SYS_SICRH (0x01000000 | \ SICRH_ETSEC2_B | \ @@ -353,84 +251,6 @@ SICRL_ETSEC2_A) /* 0x33fc0003) */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) - -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -#if defined(CONFIG_PCI) -/* PCI @ 0x80000000 */ -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L (0) -#define CONFIG_SYS_IBAT1U (0) -#define CONFIG_SYS_IBAT2L (0) -#define CONFIG_SYS_IBAT2U (0) -#endif - -/* PCI2 not supported on 8313 */ -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ - | BATL_PP_RW \ - | BATL_CACHEINHIBIT \ - | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ - | BATU_BL_256M \ - | BATU_VS \ - | BATU_VP) - -/* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -/* FPGA, SRAM, NAND @ 0x60000000 */ -#define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #define CONFIG_NETDEV eth0 #define CONFIG_HOSTNAME "ve8313" diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index 805f7d3df6..1c3430d849 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -18,42 +18,13 @@ #define __CONFIG_H /* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_CADDY2 -#define VME_CADDY2 -#endif - -/* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC834x 1 /* MPC834x family */ -#define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_VME8349 1 /* ESD VME8349 board specific */ /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ -#define CONFIG_PCI_66M -#ifdef CONFIG_PCI_66M -#define CONFIG_83XX_CLKIN 66000000 /* in Hz */ -#else -#define CONFIG_83XX_CLKIN 33000000 /* in Hz */ -#endif - -#ifndef CONFIG_SYS_CLK_FREQ -#ifdef CONFIG_PCI_66M -#define CONFIG_SYS_CLK_FREQ 66000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 -#else -#define CONFIG_SYS_CLK_FREQ 33000000 -#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 -#endif -#endif - -#define CONFIG_SYS_IMMR 0xE0000000 - #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */ #define CONFIG_SYS_MEMTEST_END 0x00100000 @@ -80,9 +51,7 @@ */ #undef CONFIG_DDR_32BIT -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* DDR is sys memory*/ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \ | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) #define CONFIG_DDR_2T_TIMING @@ -94,59 +63,12 @@ /* * FLASH on the Local Bus */ -#ifdef VME_CADDY2 -#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16bit */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xffc06ff7 */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_4MB) -#else #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ -#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ - BR_PS_16 | /* 16bit */ \ - BR_MS_GPCM | /* MSEL = GPCM */ \ - BR_V) /* valid */ - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ - | OR_GPCM_XAM \ - | OR_GPCM_CSNT \ - | OR_GPCM_ACS_DIV2 \ - | OR_GPCM_XACS \ - | OR_GPCM_SCY_15 \ - | OR_GPCM_TRLX_SET \ - | OR_GPCM_EHTR_SET \ - | OR_GPCM_EAD) - /* 0xf8006ff7 */ -#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_128MB) -#endif + #define CONFIG_SYS_WINDOW1_BASE 0xf0000000 -#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_WINDOW1_BASE \ - | BR_PS_32 \ - | BR_MS_GPCM \ - | BR_V) - /* 0xF0001801 */ -#define CONFIG_SYS_OR1_PRELIM (OR_AM_256KB \ - | OR_GPCM_SETA) - /* 0xfffc0208 */ -#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_WINDOW1_BASE -#define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_256KB) + #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ @@ -174,15 +96,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */ #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Malloc size */ -/* - * Local Bus LCRR and LBCR regs - * LCRR: no DLL bypass, Clock divider is 4 - * External Local Bus rate is - * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV - */ -#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 -#define CONFIG_SYS_LBC_LBCR 0x00000000 - #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */ /* @@ -244,14 +157,6 @@ #if defined(CONFIG_PCI) -#define PCI_64BIT -#define PCI_ONE_PCI1 -#if defined(PCI_64BIT) -#undef PCI_ALL_PCI1 -#undef PCI_TWO_PCI1 -#undef PCI_ONE_PCI1 -#endif - #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -341,51 +246,10 @@ #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */ -#define CONFIG_SYS_HRCW_LOW (\ - HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ - HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN |\ - HRCWL_VCO_1X2 |\ - HRCWL_CORE_TO_CSB_2X1) - -#if defined(PCI_64BIT) -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_64_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_DISABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#else -#define CONFIG_SYS_HRCW_HIGH (\ - HRCWH_PCI_HOST |\ - HRCWH_32_BIT_PCI |\ - HRCWH_PCI1_ARBITER_ENABLE |\ - HRCWH_PCI2_ARBITER_ENABLE |\ - HRCWH_CORE_ENABLE |\ - HRCWH_FROM_0X00000100 |\ - HRCWH_BOOTSEQ_DISABLE |\ - HRCWH_SW_WATCHDOG_DISABLE |\ - HRCWH_ROM_LOC_LOCAL_16BIT |\ - HRCWH_TSEC1M_IN_GMII |\ - HRCWH_TSEC2M_IN_GMII) -#endif - /* System IO Config */ #define CONFIG_SYS_SICRH 0 #define CONFIG_SYS_SICRL SICRL_LDP_A -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ENABLE_INSTRUCTION_CACHE) - -#define CONFIG_SYS_HID2 HID2_HBE - #define CONFIG_SYS_GPIO1_PRELIM #define CONFIG_SYS_GPIO1_DIR 0x00100000 #define CONFIG_SYS_GPIO1_DAT 0x00100000 @@ -394,84 +258,10 @@ #define CONFIG_SYS_GPIO2_DIR 0x78900000 #define CONFIG_SYS_GPIO2_DAT 0x70100000 -#define CONFIG_HIGH_BATS /* High BATs supported */ - -/* DDR @ 0x00000000 */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) - -/* PCI @ 0x80000000 */ #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#else -#define CONFIG_SYS_IBAT1L (0) -#define CONFIG_SYS_IBAT1U (0) -#define CONFIG_SYS_IBAT2L (0) -#define CONFIG_SYS_IBAT2U (0) #endif -#ifdef CONFIG_MPC83XX_PCI2 -#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_RW | \ - BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \ - BATU_VS | BATU_VP) -#else -#define CONFIG_SYS_IBAT3L (0) -#define CONFIG_SYS_IBAT3U (0) -#define CONFIG_SYS_IBAT4L (0) -#define CONFIG_SYS_IBAT4U (0) -#endif - -/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */ -#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_RW | \ - BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) -#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \ - BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#if (CONFIG_SYS_DDR_SIZE == 512) -#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ - BATL_PP_RW | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \ - BATU_BL_256M | BATU_VS | BATU_VP) -#else -#define CONFIG_SYS_IBAT7L (0) -#define CONFIG_SYS_IBAT7U (0) -#endif - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U -#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L -#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U -#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L -#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L -#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U -#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L -#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #endif diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index 2d2a87a719..1ef803b020 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_FORM_3U_VPX 1 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ #define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ #define CONFIG_ALTIVEC 1 #define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index db4424d3f8..6d38a83d90 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -7,6 +7,7 @@ #ifndef __GDSYS_FPGA_H #define __GDSYS_FPGA_H +#ifdef CONFIG_GDSYS_LEGACY_DRIVERS int init_func_fpga(void); enum { @@ -33,6 +34,7 @@ extern struct ihs_fpga *fpga_ptr[]; &fpga_ptr[ix]->fld, \ offsetof(struct ihs_fpga, fld), \ val) +#endif struct ihs_gpio { u16 read; @@ -86,82 +88,7 @@ struct ihs_fpga { }; #endif -#ifdef CONFIG_IO -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_features; /* 0x0004 */ - u16 fpga_version; /* 0x0006 */ - u16 reserved_0[5]; /* 0x0008 */ - u16 quad_serdes_reset; /* 0x0012 */ - u16 reserved_1[8181]; /* 0x0014 */ - u16 reflection_high; /* 0x3ffe */ -}; -#endif - -#ifdef CONFIG_IO64 -struct ihs_fpga_channel { - u16 status_int; - u16 config_int; - u16 switch_connect_config; - u16 tx_destination; -}; - -struct ihs_fpga_hicb { - u16 status_int; - u16 config_int; -}; - -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_features; /* 0x0004 */ - u16 fpga_version; /* 0x0006 */ - u16 reserved_0[5]; /* 0x0008 */ - u16 quad_serdes_reset; /* 0x0012 */ - u16 reserved_1[502]; /* 0x0014 */ - struct ihs_fpga_channel ch[32]; /* 0x0400 */ - struct ihs_fpga_channel hicb_ch[32]; /* 0x0500 */ - u16 reserved_2[7487]; /* 0x0580 */ - u16 reflection_high; /* 0x3ffe */ -}; -#endif - -#ifdef CONFIG_IOCON -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_version; /* 0x0004 */ - u16 fpga_features; /* 0x0006 */ - u16 reserved_0[1]; /* 0x0008 */ - u16 top_interrupt; /* 0x000a */ - u16 reserved_1[4]; /* 0x000c */ - struct ihs_gpio gpio; /* 0x0014 */ - u16 mpc3w_control; /* 0x001a */ - u16 reserved_2[2]; /* 0x001c */ - struct ihs_io_ep ep; /* 0x0020 */ - u16 reserved_3[9]; /* 0x002e */ - struct ihs_i2c i2c0; /* 0x0040 */ - u16 reserved_4[10]; /* 0x004c */ - u16 mc_int; /* 0x0060 */ - u16 mc_int_en; /* 0x0062 */ - u16 mc_status; /* 0x0064 */ - u16 mc_control; /* 0x0066 */ - u16 mc_tx_data; /* 0x0068 */ - u16 mc_tx_address; /* 0x006a */ - u16 mc_tx_cmd; /* 0x006c */ - u16 mc_res; /* 0x006e */ - u16 mc_rx_cmd_status; /* 0x0070 */ - u16 mc_rx_data; /* 0x0072 */ - u16 reserved_5[69]; /* 0x0074 */ - u16 reflection_high; /* 0x00fe */ - struct ihs_osd osd0; /* 0x0100 */ - u16 reserved_6[889]; /* 0x010e */ - u16 videomem0[2048]; /* 0x0800 */ -}; -#endif - -#if defined(CONFIG_HRCON) || defined(CONFIG_STRIDER_CON_DP) +#if defined(CONFIG_TARGET_HRCON) || defined(CONFIG_STRIDER_CON_DP) struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ @@ -270,25 +197,4 @@ struct ihs_fpga { }; #endif -#ifdef CONFIG_DLVISION_10G -struct ihs_fpga { - u16 reflection_low; /* 0x0000 */ - u16 versions; /* 0x0002 */ - u16 fpga_version; /* 0x0004 */ - u16 fpga_features; /* 0x0006 */ - u16 reserved_0[10]; /* 0x0008 */ - u16 extended_interrupt; /* 0x001c */ - u16 reserved_1[29]; /* 0x001e */ - u16 mpc3w_control; /* 0x0058 */ - u16 reserved_2[3]; /* 0x005a */ - struct ihs_i2c i2c0; /* 0x0060 */ - u16 reserved_3[2]; /* 0x006c */ - struct ihs_i2c i2c1; /* 0x0070 */ - u16 reserved_4[194]; /* 0x007c */ - struct ihs_osd osd0; /* 0x0200 */ - u16 reserved_5[761]; /* 0x020e */ - u16 videomem0[2048]; /* 0x0800 */ -}; -#endif - #endif diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h index 51800096b2..022771fff5 100644 --- a/include/linux/immap_qe.h +++ b/include/linux/immap_qe.h @@ -12,11 +12,11 @@ #define __IMMAP_QE_H__ #ifdef CONFIG_MPC83xx -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) #define QE_MURAM_SIZE 0xc000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC832X) || defined(CONFIG_ARCH_MPC8309) #define QE_MURAM_SIZE 0x4000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 diff --git a/include/mpc83xx.h b/include/mpc83xx.h index a4c5bd3837..c2a185321a 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -55,7 +55,7 @@ #define SPRIDR_PARTID 0xFFFF0000 /* Part Id */ #define SPRIDR_REVID 0x0000FFFF /* Revision Id */ -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8) #define REVID_MINOR(spridr) (spridr & 0x000000FF) #else @@ -108,7 +108,7 @@ #define SPCR_COREPR 0x00300000 #define SPCR_COREPR_SHIFT (31-11) -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) /* SPCR bits - MPC8349 specific */ /* TSEC1 data priority */ #define SPCR_TSEC1DP 0x00003000 @@ -129,9 +129,9 @@ #define SPCR_TSEC2EP 0x00000003 #define SPCR_TSEC2EP_SHIFT (31-31) -#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) -/* SPCR bits - MPC8308, MPC831x and MPC837x specific */ +#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) +/* SPCR bits - MPC8308, MPC831x and MPC837X specific */ /* TSEC data priority */ #define SPCR_TSECDP 0x00003000 #define SPCR_TSECDP_SHIFT (31-19) @@ -145,7 +145,7 @@ /* SICRL/H - System I/O Configuration Register Low/High */ -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) /* SICRL bits - MPC8349 specific */ #define SICRL_LDP_A 0x80000000 #define SICRL_USB1 0x40000000 @@ -191,7 +191,7 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 -#elif defined(CONFIG_MPC8360) +#elif defined(CONFIG_ARCH_MPC8360) /* SICRL bits - MPC8360 specific */ #define SICRL_LDP_A 0xC0000000 #define SICRL_LCLK_1 0x10000000 @@ -208,7 +208,7 @@ #define SICRH_UC2E1OBI 0x00000002 #define SICRH_UC2E2OBI 0x00000001 -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_ARCH_MPC832X) /* SICRL bits - MPC832x specific */ #define SICRL_LDP_LCS_A 0x80000000 #define SICRL_IRQ_CKS 0x20000000 @@ -216,7 +216,7 @@ #define SICRL_URT_CTPR 0x06000000 #define SICRL_IRQ_CTPR 0x00C00000 -#elif defined(CONFIG_MPC8313) +#elif defined(CONFIG_ARCH_MPC8313) /* SICRL bits - MPC8313 specific */ #define SICRL_LBC 0x30000000 #define SICRL_UART 0x0C000000 @@ -248,7 +248,7 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 -#elif defined(CONFIG_MPC8315) +#elif defined(CONFIG_ARCH_MPC8315) /* SICRL bits - MPC8315 specific */ #define SICRL_DMA_CH0 0xc0000000 #define SICRL_DMA_SPI 0x30000000 @@ -283,8 +283,8 @@ #define SICRH_TSOBI1 0x00000002 #define SICRH_TSOBI2 0x00000001 -#elif defined(CONFIG_MPC837x) -/* SICRL bits - MPC837x specific */ +#elif defined(CONFIG_ARCH_MPC837X) +/* SICRL bits - MPC837X specific */ #define SICRL_USB_A 0xC0000000 #define SICRL_USB_B 0x30000000 #define SICRL_USB_B_SD 0x20000000 @@ -314,7 +314,7 @@ #define SICRL_LDP_A 0x00000002 #define SICRL_LDP_B 0x00000001 -/* SICRH bits - MPC837x specific */ +/* SICRH bits - MPC837X specific */ #define SICRH_DDR 0x80000000 #define SICRH_TSEC1_A 0x10000000 #define SICRH_TSEC1_B 0x08000000 @@ -336,7 +336,7 @@ #define SICRH_SPI 0x00000003 #define SICRH_SPI_SD 0x00000001 -#elif defined(CONFIG_MPC8308) +#elif defined(CONFIG_ARCH_MPC8308) /* SICRL bits - MPC8308 specific */ #define SICRL_SPI_PF0 (0 << 28) #define SICRL_SPI_PF1 (1 << 28) @@ -384,7 +384,7 @@ #define SICRH_TSOBI2_V3P3 (0 << 0) #define SICRH_TSOBI2_V2P5 (1 << 0) -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) /* SICR_1 */ #define SICR_1_UART1_UART1S (0 << (30-2)) #define SICR_1_UART1_UART1RTS (1 << (30-2)) @@ -593,7 +593,7 @@ #define HRCWL_CORE_TO_CSB_2_5X1 0x00050000 #define HRCWL_CORE_TO_CSB_3X1 0x00060000 -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_ARCH_MPC8360) || defined(CONFIG_ARCH_MPC832X) #define HRCWL_CEVCOD 0x000000C0 #define HRCWL_CEVCOD_SHIFT 6 #define HRCWL_CE_PLL_VCO_DIV_4 0x00000000 @@ -639,7 +639,7 @@ #define HRCWL_CE_TO_PLL_1X30 0x0000001E #define HRCWL_CE_TO_PLL_1X31 0x0000001F -#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) +#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) #define HRCWL_SVCOD 0x30000000 #define HRCWL_SVCOD_SHIFT 28 #define HRCWL_SVCOD_DIV_2 0x00000000 @@ -647,14 +647,14 @@ #define HRCWL_SVCOD_DIV_8 0x20000000 #define HRCWL_SVCOD_DIV_1 0x30000000 -#elif defined(CONFIG_MPC837x) +#elif defined(CONFIG_ARCH_MPC837X) #define HRCWL_SVCOD 0x30000000 #define HRCWL_SVCOD_SHIFT 28 #define HRCWL_SVCOD_DIV_4 0x00000000 #define HRCWL_SVCOD_DIV_8 0x10000000 #define HRCWL_SVCOD_DIV_2 0x20000000 #define HRCWL_SVCOD_DIV_1 0x30000000 -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) #define HRCWL_CEVCOD 0x000000C0 #define HRCWL_CEVCOD_SHIFT 6 @@ -720,7 +720,7 @@ #define HRCWH_PCI_HOST_SHIFT 31 #define HRCWH_PCI_AGENT 0x00000000 -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define HRCWH_32_BIT_PCI 0x00000000 #define HRCWH_64_BIT_PCI 0x40000000 #endif @@ -731,11 +731,11 @@ #define HRCWH_PCI_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI_ARBITER_ENABLE 0x20000000 -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define HRCWH_PCI2_ARBITER_DISABLE 0x00000000 #define HRCWH_PCI2_ARBITER_ENABLE 0x10000000 -#elif defined(CONFIG_MPC8360) +#elif defined(CONFIG_ARCH_MPC8360) #define HRCWH_PCICKDRV_DISABLE 0x00000000 #define HRCWH_PCICKDRV_ENABLE 0x10000000 #endif @@ -755,18 +755,18 @@ #define HRCWH_ROM_LOC_DDR_SDRAM 0x00000000 #define HRCWH_ROM_LOC_PCI1 0x00100000 -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define HRCWH_ROM_LOC_PCI2 0x00200000 #endif -#if defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC837X) #define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000 #endif #define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000 #define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000 #define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000 -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) #define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000 #define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000 #define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000 @@ -790,7 +790,7 @@ #define HRCWH_TSEC2M_IN_SGMII 0x00001800 #endif -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define HRCWH_TSEC1M_IN_RGMII 0x00000000 #define HRCWH_TSEC1M_IN_RTBI 0x00004000 #define HRCWH_TSEC1M_IN_GMII 0x00008000 @@ -801,7 +801,7 @@ #define HRCWH_TSEC2M_IN_TBI 0x00003000 #endif -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) #define HRCWH_SECONDARY_DDR_DISABLE 0x00000000 #define HRCWH_SECONDARY_DDR_ENABLE 0x00000010 #endif @@ -818,8 +818,8 @@ /* * RSR - Reset Status Register */ -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ - defined(CONFIG_MPC837x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \ + defined(CONFIG_ARCH_MPC837X) #define RSR_RSTSRC 0xF0000000 /* Reset source */ #define RSR_RSTSRC_SHIFT 28 #else @@ -937,8 +937,8 @@ #define SCCR_PCICM 0x00010000 #define SCCR_PCICM_SHIFT 16 -#if defined(CONFIG_MPC834x) -/* SCCR bits - MPC834x specific */ +#if defined(CONFIG_ARCH_MPC834X) +/* SCCR bits - MPC834X specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -965,7 +965,7 @@ #define SCCR_USBCM_2 0x00A00000 #define SCCR_USBCM_3 0x00F00000 -#elif defined(CONFIG_MPC8313) +#elif defined(CONFIG_ARCH_MPC8313) /* TSEC1 bits are for TSEC2 as well */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 @@ -986,7 +986,7 @@ #define SCCR_USBDRCM_2 0x00200000 #define SCCR_USBDRCM_3 0x00300000 -#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) +#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) /* SCCR bits - MPC8315/MPC8308 specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 @@ -1032,8 +1032,8 @@ #define SCCR_TDMCM_2 0x00000020 #define SCCR_TDMCM_3 0x00000030 -#elif defined(CONFIG_MPC837x) -/* SCCR bits - MPC837x specific */ +#elif defined(CONFIG_ARCH_MPC837X) +/* SCCR bits - MPC837X specific */ #define SCCR_TSEC1CM 0xc0000000 #define SCCR_TSEC1CM_SHIFT 30 #define SCCR_TSEC1CM_0 0x00000000 @@ -1071,7 +1071,7 @@ #define SCCR_SATACM_1 0x00000055 #define SCCR_SATACM_2 0x000000aa #define SCCR_SATACM_3 0x000000ff -#elif defined(CONFIG_MPC8309) +#elif defined(CONFIG_ARCH_MPC8309) /* SCCR bits - MPC8309 specific */ #define SCCR_SDHCCM 0x0c000000 #define SCCR_SDHCCM_SHIFT 26 @@ -1117,7 +1117,7 @@ */ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 -#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) +#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) #define CSCONFIG_ODT_RD_NEVER 0x00000000 #define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000 #define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000 @@ -1126,10 +1126,10 @@ #define CSCONFIG_ODT_WR_ONLY_CURRENT 0x00010000 #define CSCONFIG_ODT_WR_ONLY_OTHER_CS 0x00020000 #define CSCONFIG_ODT_WR_ALL 0x00040000 -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_ARCH_MPC832X) #define CSCONFIG_ODT_RD_CFG 0x00400000 #define CSCONFIG_ODT_WR_CFG 0x00040000 -#elif defined(CONFIG_MPC8360) || defined(CONFIG_MPC837x) +#elif defined(CONFIG_ARCH_MPC8360) || defined(CONFIG_ARCH_MPC837X) #define CSCONFIG_ODT_RD_NEVER 0x00000000 #define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000 #define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000 @@ -1239,14 +1239,14 @@ #define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000 #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) +#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) #define SDRAM_CFG_DBW_MASK 0x00180000 #define SDRAM_CFG_DBW_16 0x00100000 #define SDRAM_CFG_DBW_32 0x00080000 #else #define SDRAM_CFG_32_BE 0x00080000 #endif -#if !defined(CONFIG_MPC8308) +#if !defined(CONFIG_ARCH_MPC8308) #define SDRAM_CFG_8_BE 0x00040000 #endif #define SDRAM_CFG_NCAP 0x00020000 diff --git a/include/post.h b/include/post.h index 08a771e405..eb218acde5 100644 --- a/include/post.h +++ b/include/post.h @@ -21,7 +21,7 @@ #define _POST_WORD_ADDR CONFIG_SYS_POST_WORD_ADDR #else -#if defined(CONFIG_MPC8360) +#if defined(CONFIG_ARCH_MPC8360) #include <linux/immap_qe.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h index e4579a5bec..efb2eec5ce 100644 --- a/include/usb/ehci-ci.h +++ b/include/usb/ehci-ci.h @@ -147,7 +147,7 @@ #if defined(CONFIG_MPC83xx) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC83xx_USB1_ADDR -#if defined(CONFIG_MPC834x) +#if defined(CONFIG_ARCH_MPC834X) #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC83xx_USB2_ADDR #else #define CONFIG_SYS_FSL_USB2_ADDR 0 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index b16bc6ae34..5ec4ffbeae 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -733,7 +733,6 @@ CONFIG_HDBOOT CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_HETROGENOUS_CLUSTERS CONFIG_HIDE_LOGO_VERSION -CONFIG_HIGH_BATS CONFIG_HIKEY_GPIO CONFIG_HITACHI_SX14 CONFIG_HOSTNAME @@ -881,7 +880,6 @@ CONFIG_HPS_SDR_CTRLCFG_RFIFOCMAP_RFIFOCMAP CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL CONFIG_HPS_SDR_CTRLCFG_STATICCFG_USEECCASDATA CONFIG_HPS_SDR_CTRLCFG_WFIFOCMAP_WFIFOCMAP -CONFIG_HRCON CONFIG_HRCON_DH CONFIG_HRCON_FANS CONFIG_HSMMC2_8BIT @@ -1220,23 +1218,6 @@ CONFIG_MMC_SPI_SPEED CONFIG_MMC_SUNXI_SLOT CONFIG_MMU CONFIG_MONITOR_IS_IN_RAM -CONFIG_MPC8308 -CONFIG_MPC8309 -CONFIG_MPC830x -CONFIG_MPC8313 -CONFIG_MPC8313ERDB -CONFIG_MPC8315 -CONFIG_MPC8315ERDB -CONFIG_MPC831x -CONFIG_MPC832XEMDS -CONFIG_MPC832x -CONFIG_MPC8349 -CONFIG_MPC8349ITX -CONFIG_MPC834x -CONFIG_MPC8360 -CONFIG_MPC837XEMDS -CONFIG_MPC837XERDB -CONFIG_MPC837x CONFIG_MPC83XX_GPIO CONFIG_MPC83XX_GPIO_0_INIT_DIRECTION CONFIG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN @@ -1913,7 +1894,6 @@ CONFIG_STANDALONE_LOAD_ADDR CONFIG_STATIC_BOARD_REV CONFIG_STD_DEVICES_SETTINGS CONFIG_STM32_FLASH -CONFIG_STRIDER CONFIG_STRIDER_CON CONFIG_STRIDER_CON_DP CONFIG_STRIDER_CPU @@ -1939,10 +1919,6 @@ CONFIG_SYS_64BIT_VSPRINTF CONFIG_SYS_66MHZ CONFIG_SYS_8313ERDB_BROKEN_PMC CONFIG_SYS_83XX_DDR_USES_CS0 -CONFIG_SYS_ACR_APARK -CONFIG_SYS_ACR_PARKM -CONFIG_SYS_ACR_PIPE_DEP -CONFIG_SYS_ACR_RPTCNT CONFIG_SYS_ADDRESS_MAP_A CONFIG_SYS_ADV7611_I2C CONFIG_SYS_ALT_BOOT @@ -1959,10 +1935,6 @@ CONFIG_SYS_AMASK4 CONFIG_SYS_AMASK5 CONFIG_SYS_AMASK6 CONFIG_SYS_AMASK7 -CONFIG_SYS_APP1_BASE -CONFIG_SYS_APP1_SIZE -CONFIG_SYS_APP2_BASE -CONFIG_SYS_APP2_SIZE CONFIG_SYS_ARM_CACHE_WRITETHROUGH CONFIG_SYS_AT91_CPU_NAME CONFIG_SYS_AT91_MAIN_CLOCK @@ -2278,7 +2250,6 @@ CONFIG_SYS_DDRCDR_VALUE CONFIG_SYS_DDRD CONFIG_SYS_DDRTC CONFIG_SYS_DDRUA -CONFIG_SYS_DDR_BASE CONFIG_SYS_DDR_BLOCK1_SIZE CONFIG_SYS_DDR_BLOCK2_BASE CONFIG_SYS_DDR_CDR_1 @@ -2952,9 +2923,6 @@ CONFIG_SYS_GPSR2_VAL CONFIG_SYS_GPSR3_VAL CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HELP_CMD_WIDTH -CONFIG_SYS_HID0_FINAL -CONFIG_SYS_HID0_INIT -CONFIG_SYS_HID2 CONFIG_SYS_HIGH CONFIG_SYS_HMI_BASE CONFIG_SYS_HOSTNAME @@ -3228,27 +3196,8 @@ CONFIG_SYS_LBC_NONCACHE_BASE CONFIG_SYS_LBC_SDRAM_BASE CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_SIZE -CONFIG_SYS_LBLAWAR0_PRELIM -CONFIG_SYS_LBLAWAR1_PRELIM -CONFIG_SYS_LBLAWAR2_PRELIM -CONFIG_SYS_LBLAWAR3_PRELIM -CONFIG_SYS_LBLAWAR4_PRELIM -CONFIG_SYS_LBLAWAR5_PRELIM -CONFIG_SYS_LBLAWAR6_PRELIM -CONFIG_SYS_LBLAWAR7_PRELIM -CONFIG_SYS_LBLAWBAR0_PRELIM -CONFIG_SYS_LBLAWBAR1_PRELIM -CONFIG_SYS_LBLAWBAR2_PRELIM -CONFIG_SYS_LBLAWBAR3_PRELIM -CONFIG_SYS_LBLAWBAR4_PRELIM -CONFIG_SYS_LBLAWBAR5_PRELIM -CONFIG_SYS_LBLAWBAR6_PRELIM -CONFIG_SYS_LBLAWBAR7_PRELIM CONFIG_SYS_LB_SDRAM CONFIG_SYS_LCD_BASE -CONFIG_SYS_LCRR_CLKDIV -CONFIG_SYS_LCRR_DBYP -CONFIG_SYS_LCRR_EADC CONFIG_SYS_LDB_CLOCK CONFIG_SYS_LDSCRIPT CONFIG_SYS_LED_BASE @@ -4128,7 +4077,6 @@ CONFIG_SYS_SPANSION_BOOT CONFIG_SYS_SPCR_OPT CONFIG_SYS_SPCR_TSEC1EP CONFIG_SYS_SPCR_TSEC2EP -CONFIG_SYS_SPCR_TSECEP CONFIG_SYS_SPD_BUS_NUM CONFIG_SYS_SPI0 CONFIG_SYS_SPI0_NUM_CS |