diff options
-rw-r--r-- | drivers/block/Makefile | 1 | ||||
-rw-r--r-- | drivers/block/ata_piix.c | 717 | ||||
-rw-r--r-- | drivers/block/ata_piix.h | 71 |
3 files changed, 0 insertions, 789 deletions
diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 8697da4262b..f161c01c67d 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -6,7 +6,6 @@ # obj-$(CONFIG_SCSI_AHCI) += ahci.o -obj-$(CONFIG_ATA_PIIX) += ata_piix.o obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o obj-$(CONFIG_FSL_SATA) += fsl_sata.o obj-$(CONFIG_IDE_FTIDE020) += ftide020.o diff --git a/drivers/block/ata_piix.c b/drivers/block/ata_piix.c deleted file mode 100644 index 30426842cc4..00000000000 --- a/drivers/block/ata_piix.c +++ /dev/null @@ -1,717 +0,0 @@ -/* - * Copyright (C) Procsys. All rights reserved. - * Author: Mushtaq Khan <mushtaq_k@procsys.com> - * <mushtaqk_921@yahoo.co.in> - * - * SPDX-License-Identifier: GPL-2.0+ - * - * with the reference to ata_piix driver in kernel 2.4.32 - */ - -/* - * This file contains SATA controller and SATA drive initialization functions - */ - -#include <common.h> -#include <asm/io.h> -#include <pci.h> -#include <command.h> -#include <config.h> -#include <asm/byteorder.h> -#include <part.h> -#include <ide.h> -#include <ata.h> -#include <sata.h> - -#define DEBUG_SATA 0 /* For debug prints set DEBUG_SATA to 1 */ - -#define SATA_DECL -#define DRV_DECL /* For file specific declarations */ -#include "ata_piix.h" - -/* Macros realted to PCI */ -#define PCI_SATA_BUS 0x00 -#define PCI_SATA_DEV 0x1f -#define PCI_SATA_FUNC 0x02 - -#define PCI_SATA_BASE1 0x10 -#define PCI_SATA_BASE2 0x14 -#define PCI_SATA_BASE3 0x18 -#define PCI_SATA_BASE4 0x1c -#define PCI_SATA_BASE5 0x20 -#define PCI_PMR 0x90 -#define PCI_PI 0x09 -#define PCI_PCS 0x92 -#define PCI_DMA_CTL 0x48 - -#define PORT_PRESENT (1<<0) -#define PORT_ENABLED (1<<4) - -u32 bdf; -u32 iobase1; /* Primary cmd block */ -u32 iobase2; /* Primary ctl block */ -u32 iobase3; /* Sec cmd block */ -u32 iobase4; /* sec ctl block */ -u32 iobase5; /* BMDMA*/ - -int pci_sata_init(void) -{ - u32 bus = PCI_SATA_BUS; - u32 dev = PCI_SATA_DEV; - u32 fun = PCI_SATA_FUNC; - u16 cmd = 0; - u8 lat = 0, pcibios_max_latency = 0xff; - u8 pmr; /* Port mapping reg */ - u8 pi; /* Prgming Interface reg */ - - bdf = PCI_BDF(bus, dev, fun); - pci_read_config_dword(bdf, PCI_SATA_BASE1, &iobase1); - pci_read_config_dword(bdf, PCI_SATA_BASE2, &iobase2); - pci_read_config_dword(bdf, PCI_SATA_BASE3, &iobase3); - pci_read_config_dword(bdf, PCI_SATA_BASE4, &iobase4); - pci_read_config_dword(bdf, PCI_SATA_BASE5, &iobase5); - - if ((iobase1 == 0xFFFFFFFF) || (iobase2 == 0xFFFFFFFF) || - (iobase3 == 0xFFFFFFFF) || (iobase4 == 0xFFFFFFFF) || - (iobase5 == 0xFFFFFFFF)) { - /* ERROR */ - printf("error no base addr for SATA controller\n"); - return 1; - } - - iobase1 &= 0xFFFFFFFE; - iobase2 &= 0xFFFFFFFE; - iobase3 &= 0xFFFFFFFE; - iobase4 &= 0xFFFFFFFE; - iobase5 &= 0xFFFFFFFE; - - /* check for mode */ - pci_read_config_byte(bdf, PCI_PMR, &pmr); - if (pmr > 1) { - puts("combined mode not supported\n"); - return 1; - } - - pci_read_config_byte(bdf, PCI_PI, &pi); - if ((pi & 0x05) != 0x05) { - puts("Sata is in Legacy mode\n"); - return 1; - } else - puts("sata is in Native mode\n"); - - /* MASTER CFG AND IO CFG */ - pci_read_config_word(bdf, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; - pci_write_config_word(bdf, PCI_COMMAND, cmd); - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); - - return 0; -} - -int sata_bus_probe(int port_no) -{ - int orig_mask, mask; - u16 pcs; - - mask = (PORT_PRESENT << port_no); - pci_read_config_word(bdf, PCI_PCS, &pcs); - orig_mask = (int) pcs & 0xff; - if ((orig_mask & mask) != mask) - return 0; - else - return 1; -} - -int init_sata(int dev) -{ - static int done; - u8 i, rv = 0; - - if (!done) - done = 1; - else - return 0; - - rv = pci_sata_init(); - if (rv == 1) { - puts("pci initialization failed\n"); - return 1; - } - - port[0].port_no = 0; - port[0].ioaddr.cmd_addr = iobase1; - port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr = - iobase2 | ATA_PCI_CTL_OFS; - port[0].ioaddr.bmdma_addr = iobase5; - - port[1].port_no = 1; - port[1].ioaddr.cmd_addr = iobase3; - port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr = - iobase4 | ATA_PCI_CTL_OFS; - port[1].ioaddr.bmdma_addr = iobase5 + 0x8; - - for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) - sata_port(&port[i].ioaddr); - - for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) { - if (!(sata_bus_probe(i))) { - port[i].port_state = 0; - printf("SATA#%d port is not present\n", i); - } else { - printf("SATA#%d port is present\n", i); - if (sata_bus_softreset(i)) - port[i].port_state = 0; - else - port[i].port_state = 1; - } - } - - for (i = 0; i < CONFIG_SYS_SATA_MAXBUS; i++) { - u8 j, devno; - - if (port[i].port_state == 0) - continue; - for (j = 0; j < CONFIG_SYS_SATA_DEVS_PER_BUS; j++) { - sata_identify(i, j); - set_Feature_cmd(i, j); - devno = i * CONFIG_SYS_SATA_DEVS_PER_BUS + j; - if ((sata_dev_desc[devno].lba > 0) && - (sata_dev_desc[devno].blksz > 0)) { - dev_print(&sata_dev_desc[devno]); - /* initialize partition type */ - init_part(&sata_dev_desc[devno]); - } - } - } - return 0; -} - -int reset_sata(int dev) -{ - return 0; -} - -static inline u8 sata_inb(unsigned long ioaddr) -{ - return inb(ioaddr); -} - -static inline void sata_outb(unsigned char val, unsigned long ioaddr) -{ - outb(val, ioaddr); -} - -static void output_data(struct sata_ioports *ioaddr, ulong * sect_buf, - int words) -{ - outsw(ioaddr->data_addr, sect_buf, words << 1); -} - -static int input_data(struct sata_ioports *ioaddr, ulong * sect_buf, int words) -{ - insw(ioaddr->data_addr, sect_buf, words << 1); - return 0; -} - -static void sata_cpy(unsigned char *dst, unsigned char *src, unsigned int len) -{ - unsigned char *end, *last; - - last = dst; - end = src + len - 1; - - /* reserve space for '\0' */ - if (len < 2) - goto OUT; - - /* skip leading white space */ - while ((*src) && (src < end) && (*src == ' ')) - ++src; - - /* copy string, omitting trailing white space */ - while ((*src) && (src < end)) { - *dst++ = *src; - if (*src++ != ' ') - last = dst; - } -OUT: - *last = '\0'; -} - -int sata_bus_softreset(int num) -{ - u8 dev = 0, status = 0, i; - - port[num].dev_mask = 0; - - for (i = 0; i < CONFIG_SYS_SATA_DEVS_PER_BUS; i++) { - if (!(sata_devchk(&port[num].ioaddr, i))) { - debug("dev_chk failed for dev#%d\n", i); - } else { - port[num].dev_mask |= (1 << i); - debug("dev_chk passed for dev#%d\n", i); - } - } - - if (!(port[num].dev_mask)) { - printf("no devices on port%d\n", num); - return 1; - } - - dev_select(&port[num].ioaddr, dev); - - port[num].ctl_reg = 0x08; /* Default value of control reg */ - sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr); - udelay(10); - sata_outb(port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr); - udelay(10); - sata_outb(port[num].ctl_reg, port[num].ioaddr.ctl_addr); - - /* - * spec mandates ">= 2ms" before checking status. - * We wait 150ms, because that was the magic delay used for - * ATAPI devices in Hale Landis's ATADRVR, for the period of time - * between when the ATA command register is written, and then - * status is checked. Because waiting for "a while" before - * checking status is fine, post SRST, we perform this magic - * delay here as well. - */ - mdelay(150); - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 300); - while ((status & ATA_BUSY)) { - mdelay(100); - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 3); - } - - if (status & ATA_BUSY) - printf("ata%u is slow to respond,plz be patient\n", num); - - while ((status & ATA_BUSY)) { - mdelay(100); - status = sata_chk_status(&port[num].ioaddr); - } - - if (status & ATA_BUSY) { - printf("ata%u failed to respond : bus reset failed\n", num); - return 1; - } - return 0; -} - -void sata_identify(int num, int dev) -{ - u8 cmd = 0, status = 0; - u8 devno = num * CONFIG_SYS_SATA_DEVS_PER_BUS + dev; - u16 iobuf[ATA_SECT_SIZE]; - u64 n_sectors = 0; - u8 mask = 0; - - memset(iobuf, 0, sizeof(iobuf)); - hd_driveid_t *iop = (hd_driveid_t *) iobuf; - - if (dev == 0) - mask = 0x01; - else - mask = 0x02; - - if (!(port[num].dev_mask & mask)) { - printf("dev%d is not present on port#%d\n", dev, num); - return; - } - - printf("port=%d dev=%d\n", num, dev); - - dev_select(&port[num].ioaddr, dev); - - status = 0; - cmd = ATA_CMD_IDENT; /* Device Identify Command */ - sata_outb(cmd, port[num].ioaddr.command_addr); - sata_inb(port[num].ioaddr.altstatus_addr); - udelay(10); - - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 1000); - if (status & ATA_ERR) { - puts("\ndevice not responding\n"); - port[num].dev_mask &= ~mask; - return; - } - - input_data(&port[num].ioaddr, (ulong *) iobuf, ATA_SECTORWORDS); - - debug("\nata%u: dev %u cfg 49:%04x 82:%04x 83:%04x 84:%04x85:%04x" - "86:%04x" "87:%04x 88:%04x\n", num, dev, iobuf[49], - iobuf[82], iobuf[83], iobuf[84], iobuf[85], iobuf[86], - iobuf[87], iobuf[88]); - - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(iobuf) || !ata_id_has_lba(iobuf)) - debug("ata%u: no dma/lba\n", num); - ata_dump_id(iobuf); - - if (ata_id_has_lba48(iobuf)) - n_sectors = ata_id_u64(iobuf, 100); - else - n_sectors = ata_id_u32(iobuf, 60); - debug("no. of sectors %u\n", ata_id_u64(iobuf, 100)); - debug("no. of sectors %u\n", ata_id_u32(iobuf, 60)); - - if (n_sectors == 0) { - port[num].dev_mask &= ~mask; - return; - } - - sata_cpy((unsigned char *)sata_dev_desc[devno].revision, iop->fw_rev, - sizeof(sata_dev_desc[devno].revision)); - sata_cpy((unsigned char *)sata_dev_desc[devno].vendor, iop->model, - sizeof(sata_dev_desc[devno].vendor)); - sata_cpy((unsigned char *)sata_dev_desc[devno].product, iop->serial_no, - sizeof(sata_dev_desc[devno].product)); - strswab(sata_dev_desc[devno].revision); - strswab(sata_dev_desc[devno].vendor); - - if ((iop->config & 0x0080) == 0x0080) - sata_dev_desc[devno].removable = 1; - else - sata_dev_desc[devno].removable = 0; - - sata_dev_desc[devno].lba = iop->lba_capacity; - debug("lba=0x%x", sata_dev_desc[devno].lba); - -#ifdef CONFIG_LBA48 - if (iop->command_set_2 & 0x0400) { - sata_dev_desc[devno].lba48 = 1; - lba = (unsigned long long) iop->lba48_capacity[0] | - ((unsigned long long) iop->lba48_capacity[1] << 16) | - ((unsigned long long) iop->lba48_capacity[2] << 32) | - ((unsigned long long) iop->lba48_capacity[3] << 48); - } else { - sata_dev_desc[devno].lba48 = 0; - } -#endif - - /* assuming HD */ - sata_dev_desc[devno].type = DEV_TYPE_HARDDISK; - sata_dev_desc[devno].blksz = ATA_BLOCKSIZE; - sata_dev_desc[devno].log2blksz = LOG2(sata_dev_desc[devno].blksz); - sata_dev_desc[devno].lun = 0; /* just to fill something in... */ -} - -void set_Feature_cmd(int num, int dev) -{ - u8 mask = 0x00, status = 0; - - if (dev == 0) - mask = 0x01; - else - mask = 0x02; - - if (!(port[num].dev_mask & mask)) { - debug("dev%d is not present on port#%d\n", dev, num); - return; - } - - dev_select(&port[num].ioaddr, dev); - - sata_outb(SETFEATURES_XFER, port[num].ioaddr.feature_addr); - sata_outb(XFER_PIO_4, port[num].ioaddr.nsect_addr); - sata_outb(0, port[num].ioaddr.lbal_addr); - sata_outb(0, port[num].ioaddr.lbam_addr); - sata_outb(0, port[num].ioaddr.lbah_addr); - - sata_outb(ATA_DEVICE_OBS, port[num].ioaddr.device_addr); - sata_outb(ATA_CMD_SETF, port[num].ioaddr.command_addr); - - udelay(50); - mdelay(150); - - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 5000); - if ((status & (ATA_STAT_BUSY | ATA_STAT_ERR))) { - printf("Error : status 0x%02x\n", status); - port[num].dev_mask &= ~mask; - } -} - -void sata_port(struct sata_ioports *ioport) -{ - ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA; - ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR; - ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE; - ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT; - ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL; - ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM; - ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH; - ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE; - ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS; - ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD; -} - -int sata_devchk(struct sata_ioports *ioaddr, int dev) -{ - u8 nsect, lbal; - - dev_select(ioaddr, dev); - - sata_outb(0x55, ioaddr->nsect_addr); - sata_outb(0xaa, ioaddr->lbal_addr); - - sata_outb(0xaa, ioaddr->nsect_addr); - sata_outb(0x55, ioaddr->lbal_addr); - - sata_outb(0x55, ioaddr->nsect_addr); - sata_outb(0xaa, ioaddr->lbal_addr); - - nsect = sata_inb(ioaddr->nsect_addr); - lbal = sata_inb(ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return 1; /* we found a device */ - else - return 0; /* nothing found */ -} - -void dev_select(struct sata_ioports *ioaddr, int dev) -{ - u8 tmp = 0; - - if (dev == 0) - tmp = ATA_DEVICE_OBS; - else - tmp = ATA_DEVICE_OBS | ATA_DEV1; - - sata_outb(tmp, ioaddr->device_addr); - sata_inb(ioaddr->altstatus_addr); - udelay(5); -} - -u8 sata_busy_wait(struct sata_ioports *ioaddr, int bits, unsigned int max) -{ - u8 status; - - do { - udelay(1000); - status = sata_chk_status(ioaddr); - max--; - } while ((status & bits) && (max > 0)); - - return status; -} - -u8 sata_chk_status(struct sata_ioports *ioaddr) -{ - return sata_inb(ioaddr->status_addr); -} - - -ulong sata_read(int device, ulong blknr, lbaint_t blkcnt, void *buff) -{ - ulong n = 0, *buffer = (ulong *)buff; - u8 dev = 0, num = 0, mask = 0, status = 0; - -#ifdef CONFIG_LBA48 - unsigned char lba48 = 0; - - if (blknr & 0x0000fffff0000000) { - if (!sata_dev_desc[devno].lba48) { - printf("Drive doesn't support 48-bit addressing\n"); - return 0; - } - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - /* Port Number */ - num = device / CONFIG_SYS_SATA_DEVS_PER_BUS; - /* dev on the port */ - if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS) - dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS; - else - dev = device; - - if (dev == 0) - mask = 0x01; - else - mask = 0x02; - - if (!(port[num].dev_mask & mask)) { - printf("dev%d is not present on port#%d\n", dev, num); - return 0; - } - - /* Select device */ - dev_select(&port[num].ioaddr, dev); - - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500); - if (status & ATA_BUSY) { - printf("ata%u failed to respond\n", port[num].port_no); - return n; - } - while (blkcnt-- > 0) { - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500); - if (status & ATA_BUSY) { - printf("ata%u failed to respond\n", 0); - return n; - } -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - sata_outb(0, port[num].ioaddr.nsect_addr); - sata_outb((blknr >> 24) & 0xFF, - port[num].ioaddr.lbal_addr); - sata_outb((blknr >> 32) & 0xFF, - port[num].ioaddr.lbam_addr); - sata_outb((blknr >> 40) & 0xFF, - port[num].ioaddr.lbah_addr); - } -#endif - sata_outb(1, port[num].ioaddr.nsect_addr); - sata_outb(((blknr) >> 0) & 0xFF, - port[num].ioaddr.lbal_addr); - sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); - sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); - -#ifdef CONFIG_LBA48 - if (lba48) { - sata_outb(ATA_LBA, port[num].ioaddr.device_addr); - sata_outb(ATA_CMD_READ_EXT, - port[num].ioaddr.command_addr); - } else -#endif - { - sata_outb(ATA_LBA | ((blknr >> 24) & 0xF), - port[num].ioaddr.device_addr); - sata_outb(ATA_CMD_READ, - port[num].ioaddr.command_addr); - } - - mdelay(50); - /* may take up to 4 sec */ - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000); - - if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) - != ATA_STAT_DRQ) { - u8 err = 0; - - printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n", - device, (ulong) blknr, status); - err = sata_inb(port[num].ioaddr.error_addr); - printf("Error reg = 0x%x\n", err); - return n; - } - input_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS); - sata_inb(port[num].ioaddr.altstatus_addr); - udelay(50); - - ++n; - ++blknr; - buffer += ATA_SECTORWORDS; - } - return n; -} - -ulong sata_write(int device, ulong blknr, lbaint_t blkcnt, const void *buff) -{ - ulong n = 0, *buffer = (ulong *)buff; - unsigned char status = 0, num = 0, dev = 0, mask = 0; - -#ifdef CONFIG_LBA48 - unsigned char lba48 = 0; - - if (blknr & 0x0000fffff0000000) { - if (!sata_dev_desc[devno].lba48) { - printf("Drive doesn't support 48-bit addressing\n"); - return 0; - } - /* more than 28 bits used, use 48bit mode */ - lba48 = 1; - } -#endif - /* Port Number */ - num = device / CONFIG_SYS_SATA_DEVS_PER_BUS; - /* dev on the Port */ - if (device >= CONFIG_SYS_SATA_DEVS_PER_BUS) - dev = device - CONFIG_SYS_SATA_DEVS_PER_BUS; - else - dev = device; - - if (dev == 0) - mask = 0x01; - else - mask = 0x02; - - /* Select device */ - dev_select(&port[num].ioaddr, dev); - - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500); - if (status & ATA_BUSY) { - printf("ata%u failed to respond\n", port[num].port_no); - return n; - } - - while (blkcnt-- > 0) { - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 500); - if (status & ATA_BUSY) { - printf("ata%u failed to respond\n", - port[num].port_no); - return n; - } -#ifdef CONFIG_LBA48 - if (lba48) { - /* write high bits */ - sata_outb(0, port[num].ioaddr.nsect_addr); - sata_outb((blknr >> 24) & 0xFF, - port[num].ioaddr.lbal_addr); - sata_outb((blknr >> 32) & 0xFF, - port[num].ioaddr.lbam_addr); - sata_outb((blknr >> 40) & 0xFF, - port[num].ioaddr.lbah_addr); - } -#endif - sata_outb(1, port[num].ioaddr.nsect_addr); - sata_outb((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr); - sata_outb((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr); - sata_outb((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr); -#ifdef CONFIG_LBA48 - if (lba48) { - sata_outb(ATA_LBA, port[num].ioaddr.device_addr); - sata_outb(ATA_CMD_WRITE_EXT, - port[num].ioaddr.command_addr); - } else -#endif - { - sata_outb(ATA_LBA | ((blknr >> 24) & 0xF), - port[num].ioaddr.device_addr); - sata_outb(ATA_CMD_WRITE, - port[num].ioaddr.command_addr); - } - - mdelay(50); - /* may take up to 4 sec */ - status = sata_busy_wait(&port[num].ioaddr, ATA_BUSY, 4000); - if ((status & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) - != ATA_STAT_DRQ) { - printf("Error no DRQ dev %d blk %ld: sts 0x%02x\n", - device, (ulong) blknr, status); - return n; - } - - output_data(&port[num].ioaddr, buffer, ATA_SECTORWORDS); - sata_inb(port[num].ioaddr.altstatus_addr); - udelay(50); - - ++n; - ++blknr; - buffer += ATA_SECTORWORDS; - } - return n; -} - -int scan_sata(int dev) -{ - return 0; -} diff --git a/drivers/block/ata_piix.h b/drivers/block/ata_piix.h deleted file mode 100644 index 6c68ea2f018..00000000000 --- a/drivers/block/ata_piix.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ATA_PIIX_H__ -#define __ATA_PIIX_H__ - -struct sata_ioports { - unsigned long cmd_addr; - unsigned long data_addr; - unsigned long error_addr; - unsigned long feature_addr; - unsigned long nsect_addr; - unsigned long lbal_addr; - unsigned long lbam_addr; - unsigned long lbah_addr; - unsigned long device_addr; - unsigned long status_addr; - unsigned long command_addr; - unsigned long altstatus_addr; - unsigned long ctl_addr; - unsigned long bmdma_addr; - unsigned long scr_addr; -}; - -struct sata_port { - unsigned char port_no; /* primary=0, secondary=1 */ - struct sata_ioports ioaddr; /* ATA cmd/ctl/dma reg blks */ - unsigned char ctl_reg; - unsigned char last_ctl; - unsigned char port_state; /* 1-port is available and */ - /* 0-port is not available */ - unsigned char dev_mask; -}; - -/***********SATA LIBRARY SPECIFIC DEFINITIONS AND DECLARATIONS**************/ -#ifdef SATA_DECL /* SATA library specific declarations */ -inline void ata_dump_id(u16 *id) -{ - debug("49 = 0x%04x " - "53 = 0x%04x " - "63 = 0x%04x " - "64 = 0x%04x " - "75 = 0x%04x\n", id[49], id[53], id[63], id[64], id[75]); - debug("80 = 0x%04x " - "81 = 0x%04x " - "82 = 0x%04x " - "83 = 0x%04x " - "84 = 0x%04x\n", id[80], id[81], id[82], id[83], id[84]); - debug("88 = 0x%04x " "93 = 0x%04x\n", id[88], id[93]); -} -#endif - -#ifdef SATA_DECL /*SATA library specific declarations */ -int sata_bus_softreset(int num); -void sata_identify(int num, int dev); -void sata_port(struct sata_ioports *ioport); -void set_Feature_cmd(int num, int dev); -int sata_devchk(struct sata_ioports *ioaddr, int dev); -void dev_select(struct sata_ioports *ioaddr, int dev); -u8 sata_busy_wait(struct sata_ioports *ioaddr, int bits, unsigned int max); -u8 sata_chk_status(struct sata_ioports *ioaddr); -#endif - -/************DRIVER SPECIFIC DEFINITIONS AND DECLARATIONS**************/ - -#ifdef DRV_DECL /* Driver specific declaration */ -int init_sata(int dev); -#endif - -#ifdef DRV_DECL /* Defines Driver Specific variables */ -struct sata_port port[CONFIG_SYS_SATA_MAXBUS]; -#endif - -#endif /* __ATA_PIIX_H__ */ |