diff options
-rw-r--r-- | drivers/usb/gadget/bcm_udc_otg_phy.c | 2 | ||||
-rw-r--r-- | drivers/usb/gadget/s3c_udc_otg.c | 1 | ||||
-rw-r--r-- | drivers/usb/gadget/s3c_udc_otg_phy.c | 1 | ||||
-rw-r--r-- | drivers/usb/gadget/s3c_udc_otg_priv.h | 102 | ||||
-rw-r--r-- | include/usb/s3c_udc.h | 94 |
5 files changed, 108 insertions, 92 deletions
diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c b/drivers/usb/gadget/bcm_udc_otg_phy.c index 936247e94af..c58388c639e 100644 --- a/drivers/usb/gadget/bcm_udc_otg_phy.c +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c @@ -9,7 +9,7 @@ #include <asm/io.h> #include <asm/arch/sysmap.h> -#include <usb/s3c_udc.h> +#include "s3c_udc_otg_priv.h" #include "bcm_udc_otg.h" void otg_phy_init(struct dwc2_udc *dev) diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c index 00d03f32cd2..99c6a1b1a76 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include "s3c_udc_otg_regs.h" +#include "s3c_udc_otg_priv.h" #include <usb/lin_gadget_compat.h> /***********************************************************/ diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c b/drivers/usb/gadget/s3c_udc_otg_phy.c index ffc930c9110..169f8e4dbbf 100644 --- a/drivers/usb/gadget/s3c_udc_otg_phy.c +++ b/drivers/usb/gadget/s3c_udc_otg_phy.c @@ -33,6 +33,7 @@ #include <asm/mach-types.h> #include "s3c_udc_otg_regs.h" +#include "s3c_udc_otg_priv.h" #include <usb/lin_gadget_compat.h> #include <usb/s3c_udc.h> diff --git a/drivers/usb/gadget/s3c_udc_otg_priv.h b/drivers/usb/gadget/s3c_udc_otg_priv.h new file mode 100644 index 00000000000..567fb4e263f --- /dev/null +++ b/drivers/usb/gadget/s3c_udc_otg_priv.h @@ -0,0 +1,102 @@ +/* + * Samsung S3C on-chip full/high speed USB device controllers + * Copyright (C) 2005 for Samsung Electronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __S3C_UDC_OTG_PRIV__ +#define __S3C_UDC_OTG_PRIV__ + +#include <asm/errno.h> +#include <linux/sizes.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <linux/list.h> +#include <usb/lin_gadget_compat.h> +#include <usb/s3c_udc.h> + +/*-------------------------------------------------------------------------*/ +/* DMA bounce buffer size, 16K is enough even for mass storage */ +#define DMA_BUFFER_SIZE (16*SZ_1K) + +#define EP0_FIFO_SIZE 64 +#define EP_FIFO_SIZE 512 +#define EP_FIFO_SIZE2 1024 +/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */ +#define S3C_MAX_ENDPOINTS 4 +#define S3C_MAX_HW_ENDPOINTS 16 + +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 +#define WAIT_FOR_COMPLETE 5 +#define WAIT_FOR_OUT_COMPLETE 6 +#define WAIT_FOR_IN_COMPLETE 7 +#define WAIT_FOR_NULL_COMPLETE 8 + +#define TEST_J_SEL 0x1 +#define TEST_K_SEL 0x2 +#define TEST_SE0_NAK_SEL 0x3 +#define TEST_PACKET_SEL 0x4 +#define TEST_FORCE_ENABLE_SEL 0x5 + +/* ************************************************************************* */ +/* IO + */ + +enum ep_type { + ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt +}; + +struct s3c_ep { + struct usb_ep ep; + struct dwc2_udc *dev; + + const struct usb_endpoint_descriptor *desc; + struct list_head queue; + unsigned long pio_irqs; + int len; + void *dma_buf; + + u8 stopped; + u8 bEndpointAddress; + u8 bmAttributes; + + enum ep_type ep_type; + int fifo_num; +}; + +struct s3c_request { + struct usb_request req; + struct list_head queue; +}; + +struct dwc2_udc { + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct s3c_plat_otg_data *pdata; + + int ep0state; + struct s3c_ep ep[S3C_MAX_ENDPOINTS]; + + unsigned char usb_address; + + unsigned req_pending:1, req_std:1; +}; + +extern struct dwc2_udc *the_controller; + +#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN) +#define ep_index(EP) ((EP)->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) + +extern void otg_phy_init(struct dwc2_udc *dev); +extern void otg_phy_off(struct dwc2_udc *dev); + +extern void s3c_udc_ep_set_stall(struct s3c_ep *ep); + +#endif /* __S3C_UDC_OTG_PRIV__ */ diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h index f6c3a8693c4..67c3e9112dd 100644 --- a/include/usb/s3c_udc.h +++ b/include/usb/s3c_udc.h @@ -9,99 +9,8 @@ #ifndef __S3C_USB_GADGET #define __S3C_USB_GADGET -#include <asm/errno.h> -#include <linux/sizes.h> -#include <linux/usb/ch9.h> -#include <linux/usb/gadget.h> -#include <linux/list.h> -#include <usb/lin_gadget_compat.h> - #define PHY0_SLEEP (1 << 5) -/*-------------------------------------------------------------------------*/ -/* DMA bounce buffer size, 16K is enough even for mass storage */ -#define DMA_BUFFER_SIZE (16*SZ_1K) - -#define EP0_FIFO_SIZE 64 -#define EP_FIFO_SIZE 512 -#define EP_FIFO_SIZE2 1024 -/* ep0-control, ep1in-bulk, ep2out-bulk, ep3in-int */ -#define S3C_MAX_ENDPOINTS 4 -#define S3C_MAX_HW_ENDPOINTS 16 - -#define WAIT_FOR_SETUP 0 -#define DATA_STATE_XMIT 1 -#define DATA_STATE_NEED_ZLP 2 -#define WAIT_FOR_OUT_STATUS 3 -#define DATA_STATE_RECV 4 -#define WAIT_FOR_COMPLETE 5 -#define WAIT_FOR_OUT_COMPLETE 6 -#define WAIT_FOR_IN_COMPLETE 7 -#define WAIT_FOR_NULL_COMPLETE 8 - -#define TEST_J_SEL 0x1 -#define TEST_K_SEL 0x2 -#define TEST_SE0_NAK_SEL 0x3 -#define TEST_PACKET_SEL 0x4 -#define TEST_FORCE_ENABLE_SEL 0x5 - -/* ************************************************************************* */ -/* IO - */ - -enum ep_type { - ep_control, ep_bulk_in, ep_bulk_out, ep_interrupt -}; - -struct s3c_ep { - struct usb_ep ep; - struct dwc2_udc *dev; - - const struct usb_endpoint_descriptor *desc; - struct list_head queue; - unsigned long pio_irqs; - int len; - void *dma_buf; - - u8 stopped; - u8 bEndpointAddress; - u8 bmAttributes; - - enum ep_type ep_type; - int fifo_num; -}; - -struct s3c_request { - struct usb_request req; - struct list_head queue; -}; - -struct dwc2_udc { - struct usb_gadget gadget; - struct usb_gadget_driver *driver; - - struct s3c_plat_otg_data *pdata; - - int ep0state; - struct s3c_ep ep[S3C_MAX_ENDPOINTS]; - - unsigned char usb_address; - - unsigned req_pending:1, req_std:1; -}; - -extern struct dwc2_udc *the_controller; - -#define ep_is_in(EP) (((EP)->bEndpointAddress&USB_DIR_IN) == USB_DIR_IN) -#define ep_index(EP) ((EP)->bEndpointAddress&0xF) -#define ep_maxpacket(EP) ((EP)->ep.maxpacket) - -extern void otg_phy_init(struct dwc2_udc *dev); -extern void otg_phy_off(struct dwc2_udc *dev); - -extern void s3c_udc_ep_set_stall(struct s3c_ep *ep); -extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata); - struct s3c_plat_otg_data { int (*phy_control)(int on); unsigned int regs_phy; @@ -110,4 +19,7 @@ struct s3c_plat_otg_data { unsigned int usb_flags; unsigned int usb_gusbcfg; }; + +extern int s3c_udc_probe(struct s3c_plat_otg_data *pdata); + #endif |