summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG13
-rw-r--r--board/dbau1x00/lowlevel_init.S5
-rw-r--r--common/cmd_flash.c15
-rw-r--r--include/configs/dbau1x00.h7
4 files changed, 27 insertions, 13 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 97f729c9787..20f72e89b5a 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,6 +1,19 @@
======================================================================
Changes since U-Boot 1.1.4:
======================================================================
+* Fix dbau1x00 Board
+ - Fix dbau1x00 boards broken by dbau1550 patch
+ PLL:s were not set for boards other than 1550.
+ Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+ Default boot is now bootp for cards other than 1550.
+ Patch by Thomas Lange Aug 10 2005
+
+* Fixes common/cmd_flash.c:
+
+ - fix some compiler/parser error, if using m68k tool chain
+ - optical fix for protect on/off all messages, if using more
+ then one bank
+ Patch by Jens Scharsig, 28 July 2005
* Fix Quad UART mapping on MCC200 board due to new HW revision
diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S
index 7afd5840c86..14a78465f36 100644
--- a/board/dbau1x00/lowlevel_init.S
+++ b/board/dbau1x00/lowlevel_init.S
@@ -185,6 +185,8 @@ tlbloop:
bne t0, t2, tlbloop
nop
+#endif /* CONFIG_DBAU1550 */
+
/* First setup pll:s to make serial work ok */
/* We have a 12 MHz crystal */
li t0, SYS_CPUPLL
@@ -205,6 +207,7 @@ tlbloop:
sw t1, 0(t0) /* aux pll */
sync
+#ifdef CONFIG_DBAU1550
/* Static memory controller */
/* RCE0 - can not change while fetching, do so from icache */
move t2, ra /* Store return address */
@@ -237,7 +240,7 @@ noCacheJump:
sw t1, 0(t0)
#else /* CONFIG_DBAU1550 */
li t0, MEM_STTIME0
- li t1, 0x00014C0F
+ li t1, 0x040181D7
sw t1, 0(t0)
/* RCE0 AMD 29LV640M MirrorBit Flash */
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 201f4e33d44..cb1c5bb432b 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -125,13 +125,16 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl)
static int
addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
{
- char len_used = 0; /* indicates if the "start +length" form used */
char *ep;
+ char len_used; /* indicates if the "start +length" form used */
+ char found;
+ ulong bank;
*addr_first = simple_strtoul(arg1, &ep, 16);
if (ep == arg1 || *ep != '\0')
return -1;
+ len_used = 0;
if (arg2 && *arg2 == '+'){
len_used = 1;
++arg2;
@@ -142,9 +145,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
return -1;
if (len_used){
- char found = 0;
- ulong bank;
-
/*
* *addr_last has the length, compute correct *addr_last
* XXX watch out for the integer overflow! Right now it is
@@ -159,6 +159,7 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last)
*/
/* find the end addr of the sector where the *addr_last is */
+ found = 0;
for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){
int i;
flash_info_t *info = &flash_info[bank];
@@ -506,12 +507,10 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
info->protect[i] = p;
#endif /* CFG_FLASH_PROTECTION */
}
- }
-
#if defined(CFG_FLASH_PROTECTION)
- if (!rcode) puts (" done\n");
+ if (!rcode) puts (" done\n");
#endif /* CFG_FLASH_PROTECTION */
-
+ }
return rcode;
}
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 0a10e3c75b4..4cc5085293b 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -81,8 +81,7 @@
CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \
CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C))
#else /* CONFIG_DBAU1550 */
-/* Boot from Compact flash partition 2 as default */
-#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm"
+#define CONFIG_BOOTCOMMAND "bootp;bootm"
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \
~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
@@ -133,8 +132,6 @@
#define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */
#define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */
-#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
-
#else /* CONFIG_DBAU1550 */
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
@@ -145,6 +142,8 @@
#endif /* CONFIG_DBAU1550 */
+#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2}
+
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1