diff options
-rw-r--r-- | board/ronetix/pm9263/led.c | 9 | ||||
-rw-r--r-- | board/ronetix/pm9263/pm9263.c | 42 | ||||
-rw-r--r-- | boards.cfg | 2 | ||||
-rw-r--r-- | include/configs/pm9263.h | 17 |
4 files changed, 35 insertions, 35 deletions
diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c index 4e585a47517..d6eb69f04ad 100644 --- a/board/ronetix/pm9263/led.c +++ b/board/ronetix/pm9263/led.c @@ -24,17 +24,16 @@ */ #include <common.h> -#include <asm/arch/at91sam9263.h> #include <asm/arch/at91_pmc.h> -#include <asm/arch/at91_pio.h> -#include <asm/arch/io.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> void coloured_LED_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable clock */ - writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer); + writel(1 << ATMEL_ID_PIOB, &pmc->pcer); at91_set_pio_output(CONFIG_RED_LED, 1); at91_set_pio_output(CONFIG_GREEN_LED, 1); diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c index 8071600081b..cfc9847ccc6 100644 --- a/board/ronetix/pm9263/pm9263.c +++ b/board/ronetix/pm9263/pm9263.c @@ -26,16 +26,14 @@ #include <common.h> #include <asm/sizes.h> -#include <asm/arch/at91sam9263.h> +#include <asm/io.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/at91_matrix.h> -#include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/io.h> -#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> #include <lcd.h> #include <atmel_lcdc.h> #include <dataflash.h> @@ -55,8 +53,8 @@ DECLARE_GLOBAL_DATA_PTR; static void pm9263_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC0; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; /* Enable CS3 */ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; @@ -95,7 +93,7 @@ static void pm9263_nand_hw_init(void) #ifdef CONFIG_MACB static void pm9263_macb_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* * PB27 enables the 50MHz oscillator for Ethernet PHY @@ -106,7 +104,7 @@ static void pm9263_macb_hw_init(void) at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */ /* Enable clock */ - writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer); + writel(1 << ATMEL_ID_EMAC, &pmc->pcer); /* * Disable pull-up on: @@ -145,7 +143,7 @@ vidinfo_t panel_info = { vl_vsync_len: 1, vl_upper_margin:1, vl_lower_margin:0, - mmio: AT91SAM9263_LCDC_BASE, + mmio: ATMEL_BASE_LCDC, }; void lcd_enable(void) @@ -168,8 +166,8 @@ static int pm9263_lcd_hw_psram_init(void) { volatile uint16_t x; unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC1; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; /* Enable CS3 3.3v, no pull-ups */ csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC | @@ -249,7 +247,7 @@ static int pm9263_lcd_hw_psram_init(void) static void pm9263_lcd_hw_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ @@ -275,7 +273,7 @@ static void pm9263_lcd_hw_init(void) at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer); + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); /* Power Control */ at91_set_pio_output(AT91_PIO_PORTA, 22, 1); @@ -285,9 +283,9 @@ static void pm9263_lcd_hw_init(void) /* initialize te PSRAM */ int stat = pm9263_lcd_hw_psram_init(); - gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE; + gd->fb_base = (stat == 0) ? PHYS_PSRAM : ATMEL_BASE_SRAM0; #else - gd->fb_base = AT91SAM9263_SRAM0_BASE; + gd->fb_base = ATMEL_BASE_SRAM0; #endif } @@ -341,14 +339,14 @@ void lcd_show_board_info(void) int board_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; /* Enable Ctrlc */ console_init_f(); - writel((1 << AT91SAM9263_ID_PIOA) | - (1 << AT91SAM9263_ID_PIOCDE) | - (1 << AT91SAM9263_ID_PIOB), + writel((1 << ATMEL_ID_PIOA) | + (1 << ATMEL_ID_PIOCDE) | + (1 << ATMEL_ID_PIOB), &pmc->pcer); /* arch number of AT91SAM9263EK-Board */ @@ -357,7 +355,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91_serial_hw_init(); + at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND pm9263_nand_hw_init(); #endif @@ -400,7 +398,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01); #endif return rc; } @@ -417,7 +415,7 @@ int checkboard (void) ss = "(PSRAM)"; break; - case AT91SAM9263_SRAM0_BASE: + case ATMEL_BASE_SRAM0: ss = "(Internal SRAM)"; break; diff --git a/boards.cfg b/boards.cfg index c3d72eb5789..716435466eb 100644 --- a/boards.cfg +++ b/boards.cfg @@ -123,7 +123,7 @@ meesc_dataflash arm arm926ejs meesc esd otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261 -pm9263 arm arm926ejs - ronetix at91 +pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263 da830evm arm arm926ejs da8xxevm davinci davinci da850evm arm arm926ejs da8xxevm davinci davinci hawkboard arm arm926ejs da8xxevm davinci davinci diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 96e12f24cee..1e282d2016c 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -28,6 +28,12 @@ #ifndef __CONFIG_H #define __CONFIG_H +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + /* ARM asynchronous clock */ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -36,16 +42,15 @@ #define MASTER_PLL_MUL 65 #define MAIN_PLL_DIV 2 /* 2 or 4 */ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ #define CONFIG_SYS_HZ 1000 -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/ +#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263" #define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */ #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ #define CONFIG_SYS_TEXT_BASE 0 -#define CONFIG_AT91FAMILY /* clocks */ #define CONFIG_SYS_MOR_VAL \ @@ -170,10 +175,8 @@ */ #define CONFIG_AT91_GPIO 1 #define CONFIG_ATMEL_USART 1 -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 1 /* USART 3 is DBGU */ +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS /* LCD */ #define CONFIG_LCD 1 |