summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rwxr-xr-xMAKEALL4
-rw-r--r--arch/mips/cpu/mips32/incaip/Makefile9
-rw-r--r--arch/mips/cpu/mips32/incaip/asc_serial.c300
-rw-r--r--arch/mips/cpu/mips32/incaip/asc_serial.h177
-rw-r--r--arch/mips/cpu/mips32/incaip/config.mk8
-rw-r--r--arch/mips/cpu/mips32/incaip/incaip_clock.c100
-rw-r--r--arch/mips/cpu/mips32/incaip/incaip_wdt.S55
-rw-r--r--arch/mips/include/asm/inca-ip.h2430
-rw-r--r--arch/mips/include/asm/u-boot-mips.h2
-rw-r--r--arch/mips/lib/board.c3
-rw-r--r--board/incaip/Makefile9
-rw-r--r--board/incaip/README57
-rw-r--r--board/incaip/config.mk16
-rw-r--r--board/incaip/flash.c655
-rw-r--r--board/incaip/incaip.c110
-rw-r--r--board/incaip/lowlevel_init.S287
-rw-r--r--boards.cfg4
-rw-r--r--doc/README.scrapyard1
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/inca-ip_sw.c793
-rw-r--r--include/common.h3
-rw-r--r--include/configs/incaip.h177
-rw-r--r--include/netdev.h1
23 files changed, 1 insertions, 5201 deletions
diff --git a/MAKEALL b/MAKEALL
index 705a0bb5e1..c54240ced6 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -419,10 +419,6 @@ LIST_arm="$(targets_by_arch arm | \
#########################################################################
LIST_mips4kc=" \
- incaip \
- incaip_100MHz \
- incaip_133MHz \
- incaip_150MHz \
qemu_mips \
vct_platinum \
vct_platinum_small \
diff --git a/arch/mips/cpu/mips32/incaip/Makefile b/arch/mips/cpu/mips32/incaip/Makefile
deleted file mode 100644
index 7341a4a3e8..0000000000
--- a/arch/mips/cpu/mips32/incaip/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = incaip_wdt.o
-obj-y += incaip_clock.o asc_serial.o
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c
deleted file mode 100644
index 6f0e4f2520..0000000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * (INCA) ASC UART support
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/inca-ip.h>
-#include <serial.h>
-#include <linux/compiler.h>
-#include "asc_serial.h"
-
-
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-extern uint incaip_get_fpiclk(void);
-
-static int serial_setopt (void);
-
-/* pointer to ASC register base address */
-static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC;
-
-/******************************************************************************
-*
-* serial_init - initialize a INCAASC channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-static int asc_serial_init(void)
-{
- /* we have to set PMU.EN13 bit to enable an ASC device*/
- INCAASC_PMU_ENABLE(13);
-
- /* and we have to set CLC register*/
- CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
- SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
-
- /* initialy we are in async mode */
- pAsc->asc_con = ASCCON_M_8ASYNC;
-
- /* select input port */
- pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-
- /* TXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
- ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL);
- /* enable TXFIFO */
- SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
-
- /* RXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
- ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL);
- /* enable RXFIFO */
- SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-
- /* enable error signals */
- SET_BIT(pAsc->asc_con, ASCCON_FEN);
- SET_BIT(pAsc->asc_con, ASCCON_OEN);
-
- /* acknowledge ASC interrupts */
- ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL);
-
- /* disable ASC interrupts */
- ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL);
-
- /* set FIFOs into the transparent mode */
- SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN);
- SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN);
-
- /* set baud rate */
- serial_setbrg();
-
- /* set the options */
- serial_setopt();
-
- return 0;
-}
-
-static void asc_serial_setbrg(void)
-{
- ulong uiReloadValue, fdv;
- ulong f_ASC;
-
- f_ASC = incaip_get_fpiclk();
-
-#ifndef INCAASC_USE_FDV
- fdv = 2;
- uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
- fdv = INCAASC_FDV_HIGH_BAUDRATE;
- uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
- if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
- {
-#ifndef INCAASC_USE_FDV
- fdv = 3;
- uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1;
-#else
- fdv = INCAASC_FDV_LOW_BAUDRATE;
- uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1;
-#endif /* INCAASC_USE_FDV */
-
- if ( (uiReloadValue < 0) || (uiReloadValue > 8191) )
- {
- return; /* can't impossibly generate that baud rate */
- }
- }
-
- /* Disable Baud Rate Generator; BG should only be written when R=0 */
- CLEAR_BIT(pAsc->asc_con, ASCCON_R);
-
-#ifndef INCAASC_USE_FDV
- /*
- * Disable Fractional Divider (FDE)
- * Divide clock by reload-value + constant (BRS)
- */
- /* FDE = 0 */
- CLEAR_BIT(pAsc->asc_con, ASCCON_FDE);
-
- if ( fdv == 2 )
- CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */
- else
- SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */
-
-#else /* INCAASC_USE_FDV */
-
- /* Enable Fractional Divider */
- SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
-
- /* Set fractional divider value */
- pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
-
-#endif /* INCAASC_USE_FDV */
-
- /* Set reload value in BG */
- pAsc->asc_bg = uiReloadValue;
-
- /* Enable Baud Rate Generator */
- SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */
-}
-
-/*******************************************************************************
-*
-* serial_setopt - set the serial options
-*
-* Set the channel operating mode to that specified. Following options
-* are supported: CREAD, CSIZE, PARENB, and PARODD.
-*
-* Note, this routine disables the transmitter. The calling routine
-* may have to re-enable it.
-*
-* RETURNS:
-* Returns 0 to indicate success, otherwise -1 is returned
-*/
-
-static int serial_setopt (void)
-{
- ulong con;
-
- switch ( ASC_OPTIONS & ASCOPT_CSIZE )
- {
- /* 7-bit-data */
- case ASCOPT_CS7:
- con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */
- break;
-
- /* 8-bit-data */
- case ASCOPT_CS8:
- if ( ASC_OPTIONS & ASCOPT_PARENB )
- con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */
- else
- con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */
- break;
-
- /*
- * only 7 and 8-bit frames are supported
- * if we don't use IOCTL extensions
- */
- default:
- return -1;
- }
-
- if ( ASC_OPTIONS & ASCOPT_STOPB )
- SET_BIT(con, ASCCON_STP); /* 2 stop bits */
- else
- CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */
-
- if ( ASC_OPTIONS & ASCOPT_PARENB )
- SET_BIT(con, ASCCON_PEN); /* enable parity checking */
- else
- CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */
-
- if ( ASC_OPTIONS & ASCOPT_PARODD )
- SET_BIT(con, ASCCON_ODD); /* odd parity */
- else
- CLEAR_BIT(con, ASCCON_ODD); /* even parity */
-
- if ( ASC_OPTIONS & ASCOPT_CREAD )
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */
-
- pAsc->asc_con |= con;
-
- return 0;
-}
-
-static void asc_serial_putc(const char c)
-{
- uint txFl = 0;
-
- if (c == '\n') serial_putc ('\r');
-
- /* check do we have a free space in the TX FIFO */
- /* get current filling level */
- do
- {
- txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
- }
- while ( txFl == INCAASC_TXFIFO_FULL );
-
- pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-
- /* check for errors */
- if ( pAsc->asc_con & ASCCON_OE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
- return;
- }
-}
-
-static int asc_serial_getc(void)
-{
- ulong symbol_mask;
- char c;
-
- while (!serial_tstc());
-
- symbol_mask =
- ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
-
- c = (char)(pAsc->asc_rbuf & symbol_mask);
-
- return c;
-}
-
-static int asc_serial_tstc(void)
-{
- int res = 1;
-
- if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
- {
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_FE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_PE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_OE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
- res = 0;
- }
-
- return res;
-}
-
-static struct serial_device asc_serial_drv = {
- .name = "asc_serial",
- .start = asc_serial_init,
- .stop = NULL,
- .setbrg = asc_serial_setbrg,
- .putc = asc_serial_putc,
- .puts = default_serial_puts,
- .getc = asc_serial_getc,
- .tstc = asc_serial_tstc,
-};
-
-void asc_serial_initialize(void)
-{
- serial_register(&asc_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
- return &asc_serial_drv;
-}
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h
deleted file mode 100644
index 7ffdcfaf8b..0000000000
--- a/arch/mips/cpu/mips32/incaip/asc_serial.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/* incaAscSio.h - (INCA) ASC UART tty driver header */
-
-#ifndef __INCincaAscSioh
-#define __INCincaAscSioh
-
-#include <asm/inca-ip.h>
-
-/* channel operating modes */
-#define ASCOPT_CSIZE 0x00000003
-#define ASCOPT_CS7 0x00000001
-#define ASCOPT_CS8 0x00000002
-#define ASCOPT_PARENB 0x00000004
-#define ASCOPT_STOPB 0x00000008
-#define ASCOPT_PARODD 0x00000010
-#define ASCOPT_CREAD 0x00000020
-
-#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY 0
-
-/* use fractional divider for baudrate settings */
-#define INCAASC_USE_FDV
-
-#ifdef INCAASC_USE_FDV
- #define INCAASC_FDV_LOW_BAUDRATE 71
- #define INCAASC_FDV_HIGH_BAUDRATE 453
-#endif /*INCAASC_USE_FDV*/
-
-
-#define INCAASC_TXFIFO_FL 1
-#define INCAASC_RXFIFO_FL 1
-#define INCAASC_TXFIFO_FULL 16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */
-
-#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */
-#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */
-#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */
-#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X) \
- *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR 0x00000001
-#define ASCCLC_DISS 0x00000002
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0007
- #define ASCCON_M_8SYNC 0x0
- #define ASCCON_M_8ASYNC 0x1
- #define ASCCON_M_8IRDAASYNC 0x2
- #define ASCCON_M_7ASYNCPAR 0x3
- #define ASCCON_M_9ASYNC 0x4
- #define ASCCON_M_8WAKEUPASYNC 0x5
- #define ASCCON_M_8ASYNCPAR 0x7
-#define ASCCON_STP 0x0008
-#define ASCCON_REN 0x0010
-#define ASCCON_PEN 0x0020
-#define ASCCON_FEN 0x0040
-#define ASCCON_OEN 0x0080
-#define ASCCON_PE 0x0100
-#define ASCCON_FE 0x0200
-#define ASCCON_OE 0x0400
-#define ASCCON_FDE 0x0800
-#define ASCCON_ODD 0x1000
-#define ASCCON_BRS 0x2000
-#define ASCCON_LB 0x4000
-#define ASCCON_R 0x8000
-
-/* WHBCON register's bits and bitfields */
-#define ASCWHBCON_CLRREN 0x0010
-#define ASCWHBCON_SETREN 0x0020
-#define ASCWHBCON_CLRPE 0x0100
-#define ASCWHBCON_CLRFE 0x0200
-#define ASCWHBCON_CLROE 0x0400
-#define ASCWHBCON_SETPE 0x0800
-#define ASCWHBCON_SETFE 0x1000
-#define ASCWHBCON_SETOE 0x2000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN 0x0001
-#define ASCABCON_AUREN 0x0002
-#define ASCABCON_ABSTEN 0x0004
-#define ASCABCON_ABDETEN 0x0008
-#define ASCABCON_FCDETEN 0x0010
-#define ASCABCON_EMMASK 0x0300
- #define ASCABCON_EMOFF 8
- #define ASCABCON_EM_DISAB 0x0
- #define ASCABCON_EM_DURAB 0x1
- #define ASCABCON_EM_ALWAYS 0x2
-#define ASCABCON_TXINV 0x0400
-#define ASCABCON_RXINV 0x0800
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK 0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_SETABEN 0x0001
-#define ASCWHBABCON_CLRABEN 0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET 0x0001
-#define ASCABSTAT_FCCDET 0x0002
-#define ASCABSTAT_SCSDET 0x0004
-#define ASCABSTAT_SCCDET 0x0008
-#define ASCABSTAT_DETWAIT 0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET 0x0001
-#define ASCWHBABSTAT_SETFCSDET 0x0002
-#define ASCWHBABSTAT_CLRFCCDET 0x0004
-#define ASCWHBABSTAT_SETFCCDET 0x0008
-#define ASCWHBABSTAT_CLRSCSDET 0x0010
-#define ASCWHBABSTAT_SETSCSDET 0x0020
-#define ASCWHBABSTAT_SETSCCDET 0x0040
-#define ASCWHBABSTAT_CLRSCCDET 0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXTMEN 0x0004
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXTMEN 0x0004
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT);
-
-typedef struct /* incaAsc_t */
-{
- volatile unsigned long asc_clc; /*0x0000*/
- volatile unsigned long asc_pisel; /*0x0004*/
- volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/
- volatile unsigned long asc_con; /*0x0010*/
- volatile unsigned long asc_bg; /*0x0014*/
- volatile unsigned long asc_fdv; /*0x0018*/
- volatile unsigned long asc_pmw; /* not used */ /*0x001C*/
- volatile unsigned long asc_tbuf; /*0x0020*/
- volatile unsigned long asc_rbuf; /*0x0024*/
- volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/
- volatile unsigned long asc_abcon; /*0x0030*/
- volatile unsigned long asc_abstat; /* not used */ /*0x0034*/
- volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/
- volatile unsigned long asc_rxfcon; /*0x0040*/
- volatile unsigned long asc_txfcon; /*0x0044*/
- volatile unsigned long asc_fstat; /*0x0048*/
- volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/
- volatile unsigned long asc_whbcon; /*0x0050*/
- volatile unsigned long asc_whbabcon; /*0x0054*/
- volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/
-
-} incaAsc_t;
-
-#endif /* __INCincaAscSioh */
diff --git a/arch/mips/cpu/mips32/incaip/config.mk b/arch/mips/cpu/mips32/incaip/config.mk
deleted file mode 100644
index 5c89129d8c..0000000000
--- a/arch/mips/cpu/mips32/incaip/config.mk
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2011
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-PLATFORM_CPPFLAGS += -mtune=4kc
diff --git a/arch/mips/cpu/mips32/incaip/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c
deleted file mode 100644
index efada9f6f8..0000000000
--- a/arch/mips/cpu/mips32/incaip/incaip_clock.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-
-/*******************************************************************************
-*
-* get_cpuclk - returns the frequency of the CPU.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS:
-* 150.000.000 for 150 MHz
-* 133.333.333 for 133 MHz (= 400MHz/3)
-* 100.000.000 for 100 MHz (= 400MHz/4)
-* NOTE:
-* This functions should be used by the hardware driver to get the correct
-* frequency of the CPU. Don't use the macros, which are set to init the CPU
-* frequency in the ROM code.
-*/
-uint incaip_get_cpuclk (void)
-{
- /*-------------------------------------------------------------------------*/
- /* CPU Clock Input Multiplexer (MUX I) */
- /* Multiplexer MUX I selects the maximum input clock to the CPU. */
- /*-------------------------------------------------------------------------*/
- if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) &
- INCA_IP_CGU_CGU_MUXCR_MUXI) {
- /* MUX I set to 150 MHz clock */
- return 150000000;
- } else {
- /* MUX I set to 100/133 MHz clock */
- if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) {
- /* Division value is 1/3, maximum CPU operating */
- /* frequency is 133.3 MHz */
- return 133333333;
- } else {
- /* Division value is 1/4, maximum CPU operating */
- /* frequency is 100 MHz */
- return 100000000;
- }
- }
-}
-
-/*******************************************************************************
-*
-* get_fpiclk - returns the frequency of the FPI bus.
-*
-* Gets the value directly from the INCA-IP hardware.
-*
-* RETURNS: Frquency in Hz
-*
-* NOTE:
-* This functions should be used by the hardware driver to get the correct
-* frequency of the CPU. Don't use the macros, which are set to init the CPU
-* frequency in the ROM code.
-* The calculation for the
-*/
-uint incaip_get_fpiclk (void)
-{
- uint clkCPU;
-
- clkCPU = incaip_get_cpuclk ();
-
- switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) {
- case 0x4:
- return clkCPU >> 1; /* devided by 2 */
- break;
- case 0x8:
- return clkCPU >> 2; /* devided by 4 */
- break;
- default:
- return clkCPU;
- break;
- }
-}
-
-int incaip_set_cpuclk (void)
-{
- extern void ebu_init(long);
- extern void cgu_init(long);
- extern void sdram_init(long);
- char tmp[64];
- ulong cpuclk;
-
- if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) {
- cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
- cgu_init (cpuclk);
- ebu_init (cpuclk);
- sdram_init (cpuclk);
- }
-
- return 0;
-}
diff --git a/arch/mips/cpu/mips32/incaip/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S
deleted file mode 100644
index b15320a57c..0000000000
--- a/arch/mips/cpu/mips32/incaip/incaip_wdt.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * INCA-IP Watchdog timer management code.
- *
- * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <config.h>
-#include <asm/regdef.h>
-
-
-#define WD_BASE 0xb8000000
-#define WD_CON0(value) 0x0020(value)
-#define WD_CON1(value) 0x0024(value)
-#define WD_DISABLE 0x00000008
-#define WD_ENABLE 0x00000000
-#define WD_WRITE_PW 0xFFFC00F8
-#define WD_WRITE_ENDINIT 0xFFFC00F3
-#define WD_WRITE_INIT 0xFFFC00F2
-
-
- .globl disable_incaip_wdt
-disable_incaip_wdt:
- li t0, WD_BASE
-
- /* Calculate password.
- */
- lw t2, WD_CON1(t0)
- and t2, 0xC
-
- lw t3, WD_CON0(t0)
- and t3, 0xFFFFFF01
-
- or t3, t2
- or t3, 0xF0
-
- sw t3, WD_CON0(t0) /* write password */
-
- /* Clear ENDINIT.
- */
- li t1, WD_WRITE_INIT
- sw t1, WD_CON0(t0)
-
-
- li t1, WD_DISABLE
- sw t1, WD_CON1(t0) /* disable watchdog */
- li t1, WD_WRITE_PW
- sw t1, WD_CON0(t0) /* write password */
- li t1, WD_WRITE_ENDINIT
- sw t1, WD_CON0(t0) /* end command */
-
- jr ra
- nop
diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h
deleted file mode 100644
index 5f03e2aa20..0000000000
--- a/arch/mips/include/asm/inca-ip.h
+++ /dev/null
@@ -1,2430 +0,0 @@
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-
-/***********************************************************************/
-/* Module : WDT register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_WDT (0xB8000000)
-/***********************************************************************/
-
-
-/***Reset Status Register Power On***/
-#define INCA_IP_WDT_RST_SR ((volatile u32*)(INCA_IP_WDT+ 0x0014))
-
-/***Reset Request Register***/
-#define INCA_IP_WDT_RST_REQ ((volatile u32*)(INCA_IP_WDT+ 0x0010))
-#define INCA_IP_WDT_RST_REQ_SWBOOT (1 << 24)
-#define INCA_IP_WDT_RST_REQ_SWCFG (1 << 16)
-#define INCA_IP_WDT_RST_REQ_RRPHY (1 << 5)
-#define INCA_IP_WDT_RST_REQ_RRHSP (1 << 4)
-#define INCA_IP_WDT_RST_REQ_RRFPI (1 << 3)
-#define INCA_IP_WDT_RST_REQ_RREXT (1 << 2)
-#define INCA_IP_WDT_RST_REQ_RRDSP (1 << 1)
-#define INCA_IP_WDT_RST_REQ_RRCPU (1 << 0)
-
-/***NMI Status Register***/
-#define INCA_IP_WDT_NMISR ((volatile u32*)(INCA_IP_WDT+ 0x002C))
-#define INCA_IP_WDT_NMISR_NMIWDT (1 << 2)
-#define INCA_IP_WDT_NMISR_NMIPLL (1 << 1)
-#define INCA_IP_WDT_NMISR_NMIEXT (1 << 0)
-
-/***Manufacturer Identification Register***/
-#define INCA_IP_WDT_MANID ((volatile u32*)(INCA_IP_WDT+ 0x0070))
-#define INCA_IP_WDT_MANID_MANUF (value) (((( 1 << 11) - 1) & (value)) << 5)
-
-/***Chip Identification Register***/
-#define INCA_IP_WDT_CHIPID ((volatile u32*)(INCA_IP_WDT+ 0x0074))
-#define INCA_IP_WDT_CHIPID_VERSION (value) (((( 1 << 4) - 1) & (value)) << 28)
-#define INCA_IP_WDT_CHIPID_PART_NUMBER (value) (((( 1 << 16) - 1) & (value)) << 12)
-#define INCA_IP_WDT_CHIPID_MANID (value) (((( 1 << 11) - 1) & (value)) << 1)
-
-/***Redesign Tracing Identification Register***/
-#define INCA_IP_WDT_RTID ((volatile u32*)(INCA_IP_WDT+ 0x0078))
-#define INCA_IP_WDT_RTID_LC (1 << 15)
-#define INCA_IP_WDT_RTID_RIX (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Watchdog Timer Control Register 0***/
-#define INCA_IP_WDT_WDT_CON0 ((volatile u32*)(INCA_IP_WDT+ 0x0020))
-
-/***Watchdog Timer Control Register 1***/
-#define INCA_IP_WDT_WDT_CON1 ((volatile u32*)(INCA_IP_WDT+ 0x0024))
-#define INCA_IP_WDT_WDT_CON1_WDTDR (1 << 3)
-#define INCA_IP_WDT_WDT_CON1_WDTIR (1 << 2)
-
-/***Watchdog Timer Status Register***/
-#define INCA_IP_WDT_WDT_SR ((volatile u32*)(INCA_IP_WDT+ 0x0028))
-#define INCA_IP_WDT_WDT_SR_WDTTIM (value) (((( 1 << 16) - 1) & (value)) << 16)
-#define INCA_IP_WDT_WDT_SR_WDTPR (1 << 5)
-#define INCA_IP_WDT_WDT_SR_WDTTO (1 << 4)
-#define INCA_IP_WDT_WDT_SR_WDTDS (1 << 3)
-#define INCA_IP_WDT_WDT_SR_WDTIS (1 << 2)
-#define INCA_IP_WDT_WDT_SR_WDTOE (1 << 1)
-#define INCA_IP_WDT_WDT_SR_WDTAE (1 << 0)
-
-/***********************************************************************/
-/* Module : CGU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_CGU (0xBF107000)
-/***********************************************************************/
-
-
-/***CGU PLL1 Control Register***/
-#define INCA_IP_CGU_CGU_PLL1CR ((volatile u32*)(INCA_IP_CGU+ 0x0008))
-#define INCA_IP_CGU_CGU_PLL1CR_SWRST (1 << 31)
-#define INCA_IP_CGU_CGU_PLL1CR_EN (1 << 30)
-#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16)
-#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***CGU PLL0 Control Register***/
-#define INCA_IP_CGU_CGU_PLL0CR ((volatile u32*)(INCA_IP_CGU+ 0x0000))
-#define INCA_IP_CGU_CGU_PLL0CR_SWRST (1 << 31)
-#define INCA_IP_CGU_CGU_PLL0CR_EN (1 << 30)
-#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16)
-#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***CGU PLL0 Status Register***/
-#define INCA_IP_CGU_CGU_PLL0SR ((volatile u32*)(INCA_IP_CGU+ 0x0004))
-#define INCA_IP_CGU_CGU_PLL0SR_LOCK (1 << 31)
-#define INCA_IP_CGU_CGU_PLL0SR_RCF (1 << 29)
-#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP (1 << 15)
-
-/***CGU PLL1 Status Register***/
-#define INCA_IP_CGU_CGU_PLL1SR ((volatile u32*)(INCA_IP_CGU+ 0x000C))
-#define INCA_IP_CGU_CGU_PLL1SR_LOCK (1 << 31)
-#define INCA_IP_CGU_CGU_PLL1SR_RCF (1 << 29)
-#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP (1 << 15)
-
-/***CGU Divider Control Register***/
-#define INCA_IP_CGU_CGU_DIVCR ((volatile u32*)(INCA_IP_CGU+ 0x0010))
-
-/***CGU Multiplexer Control Register***/
-#define INCA_IP_CGU_CGU_MUXCR ((volatile u32*)(INCA_IP_CGU+ 0x0014))
-#define INCA_IP_CGU_CGU_MUXCR_SWRST (1 << 31)
-#define INCA_IP_CGU_CGU_MUXCR_MUXII (1 << 1)
-#define INCA_IP_CGU_CGU_MUXCR_MUXI (1 << 0)
-
-/***CGU Fractional Divider Control Register***/
-#define INCA_IP_CGU_CGU_FDCR ((volatile u32*)(INCA_IP_CGU+ 0x0018))
-#define INCA_IP_CGU_CGU_FDCR_FDEN (1 << 31)
-#define INCA_IP_CGU_CGU_FDCR_INTEGER (value) (((( 1 << 12) - 1) & (value)) << 16)
-#define INCA_IP_CGU_CGU_FDCR_FRACTION (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : PMU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_PMU (0xBF102000)
-/***********************************************************************/
-
-
-/***PM Global Enable Register***/
-#define INCA_IP_PMU_PM_GEN ((volatile u32*)(INCA_IP_PMU+ 0x0000))
-#define INCA_IP_PMU_PM_GEN_EN16 (1 << 16)
-#define INCA_IP_PMU_PM_GEN_EN15 (1 << 15)
-#define INCA_IP_PMU_PM_GEN_EN14 (1 << 14)
-#define INCA_IP_PMU_PM_GEN_EN13 (1 << 13)
-#define INCA_IP_PMU_PM_GEN_EN12 (1 << 12)
-#define INCA_IP_PMU_PM_GEN_EN11 (1 << 11)
-#define INCA_IP_PMU_PM_GEN_EN10 (1 << 10)
-#define INCA_IP_PMU_PM_GEN_EN9 (1 << 9)
-#define INCA_IP_PMU_PM_GEN_EN8 (1 << 8)
-#define INCA_IP_PMU_PM_GEN_EN7 (1 << 7)
-#define INCA_IP_PMU_PM_GEN_EN6 (1 << 6)
-#define INCA_IP_PMU_PM_GEN_EN5 (1 << 5)
-#define INCA_IP_PMU_PM_GEN_EN4 (1 << 4)
-#define INCA_IP_PMU_PM_GEN_EN3 (1 << 3)
-#define INCA_IP_PMU_PM_GEN_EN2 (1 << 2)
-#define INCA_IP_PMU_PM_GEN_EN0 (1 << 0)
-
-/***PM Power Down Enable Register***/
-#define INCA_IP_PMU_PM_PDEN ((volatile u32*)(INCA_IP_PMU+ 0x0008))
-#define INCA_IP_PMU_PM_PDEN_EN16 (1 << 16)
-#define INCA_IP_PMU_PM_PDEN_EN15 (1 << 15)
-#define INCA_IP_PMU_PM_PDEN_EN14 (1 << 14)
-#define INCA_IP_PMU_PM_PDEN_EN13 (1 << 13)
-#define INCA_IP_PMU_PM_PDEN_EN12 (1 << 12)
-#define INCA_IP_PMU_PM_PDEN_EN11 (1 << 11)
-#define INCA_IP_PMU_PM_PDEN_EN10 (1 << 10)
-#define INCA_IP_PMU_PM_PDEN_EN9 (1 << 9)
-#define INCA_IP_PMU_PM_PDEN_EN8 (1 << 8)
-#define INCA_IP_PMU_PM_PDEN_EN7 (1 << 7)
-#define INCA_IP_PMU_PM_PDEN_EN5 (1 << 5)
-#define INCA_IP_PMU_PM_PDEN_EN4 (1 << 4)
-#define INCA_IP_PMU_PM_PDEN_EN3 (1 << 3)
-#define INCA_IP_PMU_PM_PDEN_EN2 (1 << 2)
-#define INCA_IP_PMU_PM_PDEN_EN0 (1 << 0)
-
-/***PM Wake-Up from Power Down Register***/
-#define INCA_IP_PMU_PM_WUP ((volatile u32*)(INCA_IP_PMU+ 0x0010))
-#define INCA_IP_PMU_PM_WUP_WUP16 (1 << 16)
-#define INCA_IP_PMU_PM_WUP_WUP15 (1 << 15)
-#define INCA_IP_PMU_PM_WUP_WUP14 (1 << 14)
-#define INCA_IP_PMU_PM_WUP_WUP13 (1 << 13)
-#define INCA_IP_PMU_PM_WUP_WUP12 (1 << 12)
-#define INCA_IP_PMU_PM_WUP_WUP11 (1 << 11)
-#define INCA_IP_PMU_PM_WUP_WUP10 (1 << 10)
-#define INCA_IP_PMU_PM_WUP_WUP9 (1 << 9)
-#define INCA_IP_PMU_PM_WUP_WUP8 (1 << 8)
-#define INCA_IP_PMU_PM_WUP_WUP7 (1 << 7)
-#define INCA_IP_PMU_PM_WUP_WUP5 (1 << 5)
-#define INCA_IP_PMU_PM_WUP_WUP4 (1 << 4)
-#define INCA_IP_PMU_PM_WUP_WUP3 (1 << 3)
-#define INCA_IP_PMU_PM_WUP_WUP2 (1 << 2)
-#define INCA_IP_PMU_PM_WUP_WUP0 (1 << 0)
-
-/***PM Control Register***/
-#define INCA_IP_PMU_PM_CR ((volatile u32*)(INCA_IP_PMU+ 0x0014))
-#define INCA_IP_PMU_PM_CR_AWEN (1 << 31)
-#define INCA_IP_PMU_PM_CR_SWRST (1 << 30)
-#define INCA_IP_PMU_PM_CR_SWCR (1 << 2)
-#define INCA_IP_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : BCU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_BCU (0xB8000100)
-/***********************************************************************/
-
-
-/***BCU Control Register (0010H)***/
-#define INCA_IP_BCU_BCU_CON ((volatile u32*)(INCA_IP_BCU+ 0x0010))
-#define INCA_IP_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_BCU_BCU_CON_SPE (1 << 19)
-#define INCA_IP_BCU_BCU_CON_PSE (1 << 18)
-#define INCA_IP_BCU_BCU_CON_DBG (1 << 16)
-#define INCA_IP_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***BCU Error Control Capture Register (0020H)***/
-#define INCA_IP_BCU_BCU_ECON ((volatile u32*)(INCA_IP_BCU+ 0x0020))
-#define INCA_IP_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define INCA_IP_BCU_BCU_ECON_RDN (1 << 23)
-#define INCA_IP_BCU_BCU_ECON_WRN (1 << 22)
-#define INCA_IP_BCU_BCU_ECON_SVM (1 << 21)
-#define INCA_IP_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19)
-#define INCA_IP_BCU_BCU_ECON_ABT (1 << 18)
-#define INCA_IP_BCU_BCU_ECON_RDY (1 << 17)
-#define INCA_IP_BCU_BCU_ECON_TOUT (1 << 16)
-#define INCA_IP_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0)
-#define INCA_IP_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28)
-
-/***BCU Error Address Capture Register (0024 H)***/
-#define INCA_IP_BCU_BCU_EADD ((volatile u32*)(INCA_IP_BCU+ 0x0024))
-#define INCA_IP_BCU_BCU_EADD_FPIADR
-
-/***BCU Error Data Capture Register (0028H)***/
-#define INCA_IP_BCU_BCU_EDAT ((volatile u32*)(INCA_IP_BCU+ 0x0028))
-#define INCA_IP_BCU_BCU_EDAT_FPIDAT
-
-/***********************************************************************/
-/* Module : MBC register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_MBC (0xBF103000)
-/***********************************************************************/
-
-
-/***Mailbox CPU Configuration Register***/
-#define INCA_IP_MBC_MBC_CFG ((volatile u32*)(INCA_IP_MBC+ 0x0080))
-#define INCA_IP_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_MBC_MBC_CFG_RES (1 << 5)
-#define INCA_IP_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1)
-#define INCA_IP_MBC_MBC_CFG_SIZE (1 << 0)
-
-/***Mailbox CPU Interrupt Status Register***/
-#define INCA_IP_MBC_MBC_ISR ((volatile u32*)(INCA_IP_MBC+ 0x0084))
-#define INCA_IP_MBC_MBC_ISR_B3DA (1 << 31)
-#define INCA_IP_MBC_MBC_ISR_B2DA (1 << 30)
-#define INCA_IP_MBC_MBC_ISR_B1E (1 << 29)
-#define INCA_IP_MBC_MBC_ISR_B0E (1 << 28)
-#define INCA_IP_MBC_MBC_ISR_WDT (1 << 27)
-#define INCA_IP_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask Register***/
-#define INCA_IP_MBC_MBC_MSK ((volatile u32*)(INCA_IP_MBC+ 0x0088))
-#define INCA_IP_MBC_MBC_MSK_B3DA (1 << 31)
-#define INCA_IP_MBC_MBC_MSK_B2DA (1 << 30)
-#define INCA_IP_MBC_MBC_MSK_B1E (1 << 29)
-#define INCA_IP_MBC_MBC_MSK_B0E (1 << 28)
-#define INCA_IP_MBC_MBC_MSK_WDT (1 << 27)
-#define INCA_IP_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 01 Register***/
-#define INCA_IP_MBC_MBC_MSK01 ((volatile u32*)(INCA_IP_MBC+ 0x008C))
-#define INCA_IP_MBC_MBC_MSK01_B3DA (1 << 31)
-#define INCA_IP_MBC_MBC_MSK01_B2DA (1 << 30)
-#define INCA_IP_MBC_MBC_MSK01_B1E (1 << 29)
-#define INCA_IP_MBC_MBC_MSK01_B0E (1 << 28)
-#define INCA_IP_MBC_MBC_MSK01_WDT (1 << 27)
-#define INCA_IP_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 10 Register***/
-#define INCA_IP_MBC_MBC_MSK10 ((volatile u32*)(INCA_IP_MBC+ 0x0090))
-#define INCA_IP_MBC_MBC_MSK10_B3DA (1 << 31)
-#define INCA_IP_MBC_MBC_MSK10_B2DA (1 << 30)
-#define INCA_IP_MBC_MBC_MSK10_B1E (1 << 29)
-#define INCA_IP_MBC_MBC_MSK10_B0E (1 << 28)
-#define INCA_IP_MBC_MBC_MSK10_WDT (1 << 27)
-#define INCA_IP_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Short Command Register***/
-#define INCA_IP_MBC_MBC_CMD ((volatile u32*)(INCA_IP_MBC+ 0x0094))
-#define INCA_IP_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***Mailbox CPU Input Data of Buffer 0***/
-#define INCA_IP_MBC_MBC_ID0 ((volatile u32*)(INCA_IP_MBC+ 0x0000))
-#define INCA_IP_MBC_MBC_ID0_INDATA
-
-/***Mailbox CPU Input Data of Buffer 1***/
-#define INCA_IP_MBC_MBC_ID1 ((volatile u32*)(INCA_IP_MBC+ 0x0020))
-#define INCA_IP_MBC_MBC_ID1_INDATA
-
-/***Mailbox CPU Output Data of Buffer 2***/
-#define INCA_IP_MBC_MBC_OD2 ((volatile u32*)(INCA_IP_MBC+ 0x0040))
-#define INCA_IP_MBC_MBC_OD2_OUTDATA
-
-/***Mailbox CPU Output Data of Buffer 3***/
-#define INCA_IP_MBC_MBC_OD3 ((volatile u32*)(INCA_IP_MBC+ 0x0060))
-#define INCA_IP_MBC_MBC_OD3_OUTDATA
-
-/***Mailbox CPU Control Register of Buffer 0***/
-#define INCA_IP_MBC_MBC_CR0 ((volatile u32*)(INCA_IP_MBC+ 0x0004))
-#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 1***/
-#define INCA_IP_MBC_MBC_CR1 ((volatile u32*)(INCA_IP_MBC+ 0x0024))
-#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 2***/
-#define INCA_IP_MBC_MBC_CR2 ((volatile u32*)(INCA_IP_MBC+ 0x0044))
-#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 3***/
-#define INCA_IP_MBC_MBC_CR3 ((volatile u32*)(INCA_IP_MBC+ 0x0064))
-#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Free Space of Buffer 0***/
-#define INCA_IP_MBC_MBC_FS0 ((volatile u32*)(INCA_IP_MBC+ 0x0008))
-#define INCA_IP_MBC_MBC_FS0_FS
-
-/***Mailbox CPU Free Space of Buffer 1***/
-#define INCA_IP_MBC_MBC_FS1 ((volatile u32*)(INCA_IP_MBC+ 0x0028))
-#define INCA_IP_MBC_MBC_FS1_FS
-
-/***Mailbox CPU Free Space of Buffer 2***/
-#define INCA_IP_MBC_MBC_FS2 ((volatile u32*)(INCA_IP_MBC+ 0x0048))
-#define INCA_IP_MBC_MBC_FS2_FS
-
-/***Mailbox CPU Free Space of Buffer 3***/
-#define INCA_IP_MBC_MBC_FS3 ((volatile u32*)(INCA_IP_MBC+ 0x0068))
-#define INCA_IP_MBC_MBC_FS3_FS
-
-/***Mailbox CPU Data Available in Buffer 0***/
-#define INCA_IP_MBC_MBC_DA0 ((volatile u32*)(INCA_IP_MBC+ 0x000C))
-#define INCA_IP_MBC_MBC_DA0_DA
-
-/***Mailbox CPU Data Available in Buffer 1***/
-#define INCA_IP_MBC_MBC_DA1 ((volatile u32*)(INCA_IP_MBC+ 0x002C))
-#define INCA_IP_MBC_MBC_DA1_DA
-
-/***Mailbox CPU Data Available in Buffer 2***/
-#define INCA_IP_MBC_MBC_DA2 ((volatile u32*)(INCA_IP_MBC+ 0x004C))
-#define INCA_IP_MBC_MBC_DA2_DA
-
-/***Mailbox CPU Data Available in Buffer 3***/
-#define INCA_IP_MBC_MBC_DA3 ((volatile u32*)(INCA_IP_MBC+ 0x006C))
-#define INCA_IP_MBC_MBC_DA3_DA
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
-#define INCA_IP_MBC_MBC_IABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0010))
-#define INCA_IP_MBC_MBC_IABS0_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
-#define INCA_IP_MBC_MBC_IABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0030))
-#define INCA_IP_MBC_MBC_IABS1_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
-#define INCA_IP_MBC_MBC_IABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0050))
-#define INCA_IP_MBC_MBC_IABS2_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
-#define INCA_IP_MBC_MBC_IABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0070))
-#define INCA_IP_MBC_MBC_IABS3_IABS
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
-#define INCA_IP_MBC_MBC_ITMP0 ((volatile u32*)(INCA_IP_MBC+ 0x0014))
-#define INCA_IP_MBC_MBC_ITMP0_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
-#define INCA_IP_MBC_MBC_ITMP1 ((volatile u32*)(INCA_IP_MBC+ 0x0034))
-#define INCA_IP_MBC_MBC_ITMP1_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
-#define INCA_IP_MBC_MBC_ITMP2 ((volatile u32*)(INCA_IP_MBC+ 0x0054))
-#define INCA_IP_MBC_MBC_ITMP2_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
-#define INCA_IP_MBC_MBC_ITMP3 ((volatile u32*)(INCA_IP_MBC+ 0x0074))
-#define INCA_IP_MBC_MBC_ITMP3_ITMP
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
-#define INCA_IP_MBC_MBC_OABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0018))
-#define INCA_IP_MBC_MBC_OABS0_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
-#define INCA_IP_MBC_MBC_OABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0038))
-#define INCA_IP_MBC_MBC_OABS1_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
-#define INCA_IP_MBC_MBC_OABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0058))
-#define INCA_IP_MBC_MBC_OABS2_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
-#define INCA_IP_MBC_MBC_OABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0078))
-#define INCA_IP_MBC_MBC_OABS3_OABS
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
-#define INCA_IP_MBC_MBC_OTMP0 ((volatile u32*)(INCA_IP_MBC+ 0x001C))
-#define INCA_IP_MBC_MBC_OTMP0_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
-#define INCA_IP_MBC_MBC_OTMP1 ((volatile u32*)(INCA_IP_MBC+ 0x003C))
-#define INCA_IP_MBC_MBC_OTMP1_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
-#define INCA_IP_MBC_MBC_OTMP2 ((volatile u32*)(INCA_IP_MBC+ 0x005C))
-#define INCA_IP_MBC_MBC_OTMP2_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
-#define INCA_IP_MBC_MBC_OTMP3 ((volatile u32*)(INCA_IP_MBC+ 0x007C))
-#define INCA_IP_MBC_MBC_OTMP3_OTMP
-
-/***DSP Control Register***/
-#define INCA_IP_MBC_DCTRL ((volatile u32*)(INCA_IP_MBC+ 0x00A0))
-#define INCA_IP_MBC_DCTRL_BA (1 << 0)
-#define INCA_IP_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1)
-#define INCA_IP_MBC_DCTRL_IDL (1 << 4)
-#define INCA_IP_MBC_DCTRL_RES (1 << 15)
-
-/***DSP Status Register***/
-#define INCA_IP_MBC_DSTA ((volatile u32*)(INCA_IP_MBC+ 0x00A4))
-#define INCA_IP_MBC_DSTA_IDLE (1 << 0)
-#define INCA_IP_MBC_DSTA_PD (1 << 1)
-
-/***DSP Test 1 Register***/
-#define INCA_IP_MBC_DTST1 ((volatile u32*)(INCA_IP_MBC+ 0x00A8))
-#define INCA_IP_MBC_DTST1_ABORT (1 << 0)
-#define INCA_IP_MBC_DTST1_HWF32 (1 << 1)
-#define INCA_IP_MBC_DTST1_HWF4M (1 << 2)
-#define INCA_IP_MBC_DTST1_HWFOP (1 << 3)
-
-/***********************************************************************/
-/* Module : Switch register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_Switch (0xBF104000)
-/***********************************************************************/
-
-
-/***Unknown Destination Register***/
-#define INCA_IP_Switch_UN_DEST ((volatile u32*)(INCA_IP_Switch+ 0x0000))
-#define INCA_IP_Switch_UN_DEST_CB (1 << 8)
-#define INCA_IP_Switch_UN_DEST_LB (1 << 7)
-#define INCA_IP_Switch_UN_DEST_PB (1 << 6)
-#define INCA_IP_Switch_UN_DEST_CM (1 << 5)
-#define INCA_IP_Switch_UN_DEST_LM (1 << 4)
-#define INCA_IP_Switch_UN_DEST_PM (1 << 3)
-#define INCA_IP_Switch_UN_DEST_CU (1 << 2)
-#define INCA_IP_Switch_UN_DEST_LU (1 << 1)
-#define INCA_IP_Switch_UN_DEST_PU (1 << 0)
-
-/***VLAN Control Register***/
-#define INCA_IP_Switch_VLAN_CTRL ((volatile u32*)(INCA_IP_Switch+ 0x0004))
-#define INCA_IP_Switch_VLAN_CTRL_SC (1 << 6)
-#define INCA_IP_Switch_VLAN_CTRL_SL (1 << 5)
-#define INCA_IP_Switch_VLAN_CTRL_SP (1 << 4)
-#define INCA_IP_Switch_VLAN_CTRL_TC (1 << 3)
-#define INCA_IP_Switch_VLAN_CTRL_TL (1 << 2)
-#define INCA_IP_Switch_VLAN_CTRL_TP (1 << 1)
-#define INCA_IP_Switch_VLAN_CTRL_VA (1 << 0)
-
-/***PC VLAN Configuration Register***/
-#define INCA_IP_Switch_PC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0008))
-#define INCA_IP_Switch_PC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
-
-/***LAN VLAN Configuration Register***/
-#define INCA_IP_Switch_LAN_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x000C))
-#define INCA_IP_Switch_LAN_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
-
-/***CPU VLAN Configuration Register***/
-#define INCA_IP_Switch_CPU_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0010))
-#define INCA_IP_Switch_CPU_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0)
-
-/***Priority CoS Mapping Register***/
-#define INCA_IP_Switch_PRI_CoS ((volatile u32*)(INCA_IP_Switch+ 0x0014))
-#define INCA_IP_Switch_PRI_CoS_P7 (1 << 7)
-#define INCA_IP_Switch_PRI_CoS_P6 (1 << 6)
-#define INCA_IP_Switch_PRI_CoS_P5 (1 << 5)
-#define INCA_IP_Switch_PRI_CoS_P4 (1 << 4)
-#define INCA_IP_Switch_PRI_CoS_P3 (1 << 3)
-#define INCA_IP_Switch_PRI_CoS_P2 (1 << 2)
-#define INCA_IP_Switch_PRI_CoS_P1 (1 << 1)
-#define INCA_IP_Switch_PRI_CoS_P0 (1 << 0)
-
-/***Spanning Tree Port Status Register***/
-#define INCA_IP_Switch_ST_PT ((volatile u32*)(INCA_IP_Switch+ 0x0018))
-#define INCA_IP_Switch_ST_PT_CPS (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_Switch_ST_PT_LPS (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_Switch_ST_PT_PPS (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***ARL Control Register***/
-#define INCA_IP_Switch_ARL_CTL ((volatile u32*)(INCA_IP_Switch+ 0x001C))
-#define INCA_IP_Switch_ARL_CTL_CHCC (1 << 15)
-#define INCA_IP_Switch_ARL_CTL_CHCL (1 << 14)
-#define INCA_IP_Switch_ARL_CTL_CHCP (1 << 13)
-#define INCA_IP_Switch_ARL_CTL_CC (1 << 12)
-#define INCA_IP_Switch_ARL_CTL_CL (1 << 11)
-#define INCA_IP_Switch_ARL_CTL_CP (1 << 10)
-#define INCA_IP_Switch_ARL_CTL_CG (1 << 9)
-#define INCA_IP_Switch_ARL_CTL_PS (1 << 8)
-#define INCA_IP_Switch_ARL_CTL_MRO (1 << 7)
-#define INCA_IP_Switch_ARL_CTL_SRC (1 << 6)
-#define INCA_IP_Switch_ARL_CTL_ATS (1 << 5)
-#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value) (((( 1 << 3) - 1) & (value)) << 2)
-#define INCA_IP_Switch_ARL_CTL_MAF (1 << 1)
-#define INCA_IP_Switch_ARL_CTL_ENL (1 << 0)
-#define INCA_IP_Switch_ARL_CTL_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
-
-/***CPU Access Control Register***/
-#define INCA_IP_Switch_CPU_ACTL ((volatile u32*)(INCA_IP_Switch+ 0x0020))
-#define INCA_IP_Switch_CPU_ACTL_RA (1 << 31)
-#define INCA_IP_Switch_CPU_ACTL_RW (1 << 30)
-#define INCA_IP_Switch_CPU_ACTL_Res (value) (((( 1 << 21) - 1) & (value)) << 9)
-#define INCA_IP_Switch_CPU_ACTL_AVA (1 << 8)
-#define INCA_IP_Switch_CPU_ACTL_IDX (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***CPU Access Data Register 1***/
-#define INCA_IP_Switch_DATA1 ((volatile u32*)(INCA_IP_Switch+ 0x0024))
-#define INCA_IP_Switch_DATA1_Data (value) (((( 1 << 24) - 1) & (value)) << 0)
-
-/***CPU Access Data Register 2***/
-#define INCA_IP_Switch_DATA2 ((volatile u32*)(INCA_IP_Switch+ 0x0028))
-#define INCA_IP_Switch_DATA2_Data
-
-/***CPU Port Control Register***/
-#define INCA_IP_Switch_CPU_PCTL ((volatile u32*)(INCA_IP_Switch+ 0x002C))
-#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value) (((( 1 << 3) - 1) & (value)) << 11)
-#define INCA_IP_Switch_CPU_PCTL_DAC (1 << 10)
-#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value) (((( 1 << 3) - 1) & (value)) << 7)
-#define INCA_IP_Switch_CPU_PCTL_MAM (1 << 6)
-#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_Switch_CPU_PCTL_MAC (1 << 2)
-#define INCA_IP_Switch_CPU_PCTL_EML (1 << 1)
-#define INCA_IP_Switch_CPU_PCTL_EDL (1 << 0)
-#define INCA_IP_Switch_CPU_PCTL_Res (value) (((( 1 << 18) - 1) & (value)) << 14)
-
-/***DSCP CoS Mapping Register 1***/
-#define INCA_IP_Switch_DSCP_COS1 ((volatile u32*)(INCA_IP_Switch+ 0x0030))
-#define INCA_IP_Switch_DSCP_COS1_DSCP
-
-/***DSCP CoS Mapping Register 1***/
-#define INCA_IP_Switch_DSCP_COS2 ((volatile u32*)(INCA_IP_Switch+ 0x0034))
-#define INCA_IP_Switch_DSCP_COS2_DSCP
-
-/***PC WFQ Control Register***/
-#define INCA_IP_Switch_PC_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0080))
-#define INCA_IP_Switch_PC_WFQ_CTL_P1 (1 << 9)
-#define INCA_IP_Switch_PC_WFQ_CTL_P0 (1 << 8)
-#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
-#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
-#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***PC TX Control Register***/
-#define INCA_IP_Switch_PC_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0084))
-#define INCA_IP_Switch_PC_TX_CTL_ELR (1 << 1)
-#define INCA_IP_Switch_PC_TX_CTL_EER (1 << 0)
-
-/***LAN WFQ Control Register***/
-#define INCA_IP_Switch_LAN_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0100))
-#define INCA_IP_Switch_LAN_WFQ_CTL_P1 (1 << 9)
-#define INCA_IP_Switch_LAN_WFQ_CTL_P0 (1 << 8)
-#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
-#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
-#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***LAN TX Control Register***/
-#define INCA_IP_Switch_LAN_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0104))
-#define INCA_IP_Switch_LAN_TX_CTL_ELR (1 << 1)
-#define INCA_IP_Switch_LAN_TX_CTL_EER (1 << 0)
-
-/***CPU WFQ Control Register***/
-#define INCA_IP_Switch_CPU_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0180))
-#define INCA_IP_Switch_CPU_WFQ_CTL_P1 (1 << 9)
-#define INCA_IP_Switch_CPU_WFQ_CTL_P0 (1 << 8)
-#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5)
-#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2)
-#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***PM PC RX Watermark Register***/
-#define INCA_IP_Switch_PC_WM ((volatile u32*)(INCA_IP_Switch+ 0x0200))
-#define INCA_IP_Switch_PC_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_Switch_PC_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP_Switch_PC_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_Switch_PC_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***PM LAN RX Watermark Register***/
-#define INCA_IP_Switch_LAN_WM ((volatile u32*)(INCA_IP_Switch+ 0x0204))
-#define INCA_IP_Switch_LAN_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_Switch_LAN_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP_Switch_LAN_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_Switch_LAN_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***PM CPU RX Watermark Register***/
-#define INCA_IP_Switch_CPU_WM ((volatile u32*)(INCA_IP_Switch+ 0x0208))
-#define INCA_IP_Switch_CPU_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_Switch_CPU_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP_Switch_CPU_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_Switch_CPU_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***PM CPU RX Watermark Register***/
-#define INCA_IP_Switch_GBL_WM ((volatile u32*)(INCA_IP_Switch+ 0x020C))
-#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***PM Control Register***/
-#define INCA_IP_Switch_PM_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0210))
-#define INCA_IP_Switch_PM_CTL_GDN (1 << 3)
-#define INCA_IP_Switch_PM_CTL_CDN (1 << 2)
-#define INCA_IP_Switch_PM_CTL_LDN (1 << 1)
-#define INCA_IP_Switch_PM_CTL_PDN (1 << 0)
-
-/***PM Header Control Register***/
-#define INCA_IP_Switch_PMAC_HD_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0280))
-#define INCA_IP_Switch_PMAC_HD_CTL_RL2 (1 << 21)
-#define INCA_IP_Switch_PMAC_HD_CTL_RC (1 << 20)
-#define INCA_IP_Switch_PMAC_HD_CTL_CM (1 << 19)
-#define INCA_IP_Switch_PMAC_HD_CTL_CV (1 << 18)
-#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value) (((( 1 << 16) - 1) & (value)) << 2)
-#define INCA_IP_Switch_PMAC_HD_CTL_TAG (1 << 1)
-#define INCA_IP_Switch_PMAC_HD_CTL_ADD (1 << 0)
-
-/***PM Source Address Register 1***/
-#define INCA_IP_Switch_PMAC_SA1 ((volatile u32*)(INCA_IP_Switch+ 0x0284))
-#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***PM Source Address Register 2***/
-#define INCA_IP_Switch_PMAC_SA2 ((volatile u32*)(INCA_IP_Switch+ 0x0288))
-#define INCA_IP_Switch_PMAC_SA2_SA_31_0
-
-/***PM Dest Address Register 1***/
-#define INCA_IP_Switch_PMAC_DA1 ((volatile u32*)(INCA_IP_Switch+ 0x028C))
-#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***PM Dest Address Register 2***/
-#define INCA_IP_Switch_PMAC_DA2 ((volatile u32*)(INCA_IP_Switch+ 0x0290))
-#define INCA_IP_Switch_PMAC_DA2_DA_31_0
-
-/***PM VLAN Register***/
-#define INCA_IP_Switch_PMAC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0294))
-#define INCA_IP_Switch_PMAC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 13)
-#define INCA_IP_Switch_PMAC_VLAN_CFI (1 << 12)
-#define INCA_IP_Switch_PMAC_VLAN_VLANID (value) (((( 1 << 12) - 1) & (value)) << 0)
-
-/***PM TX IPG Counter Register***/
-#define INCA_IP_Switch_PMAC_TX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x0298))
-#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***PM RX IPG Counter Register***/
-#define INCA_IP_Switch_PMAC_RX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x029C))
-#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Mirror Register***/
-#define INCA_IP_Switch_MRR ((volatile u32*)(INCA_IP_Switch+ 0x0300))
-#define INCA_IP_Switch_MRR_MRR (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_Switch_MRR_EC (1 << 5)
-#define INCA_IP_Switch_MRR_EL (1 << 4)
-#define INCA_IP_Switch_MRR_EP (1 << 3)
-#define INCA_IP_Switch_MRR_IC (1 << 2)
-#define INCA_IP_Switch_MRR_IL (1 << 1)
-#define INCA_IP_Switch_MRR_IP (1 << 0)
-
-/***Packet Length Register***/
-#define INCA_IP_Switch_PKT_LEN ((volatile u32*)(INCA_IP_Switch+ 0x0304))
-#define INCA_IP_Switch_PKT_LEN_ADD (1 << 11)
-#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value) (((( 1 << 11) - 1) & (value)) << 0)
-
-/***MDIO Access Register***/
-#define INCA_IP_Switch_MDIO_ACC ((volatile u32*)(INCA_IP_Switch+ 0x0480))
-#define INCA_IP_Switch_MDIO_ACC_RA (1 << 31)
-#define INCA_IP_Switch_MDIO_ACC_RW (1 << 30)
-#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value) (((( 1 << 5) - 1) & (value)) << 21)
-#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value) (((( 1 << 5) - 1) & (value)) << 16)
-#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***Ethernet PHY Register***/
-#define INCA_IP_Switch_EPHY ((volatile u32*)(INCA_IP_Switch+ 0x0484))
-#define INCA_IP_Switch_EPHY_SL (1 << 7)
-#define INCA_IP_Switch_EPHY_SP (1 << 6)
-#define INCA_IP_Switch_EPHY_LL (1 << 5)
-#define INCA_IP_Switch_EPHY_LP (1 << 4)
-#define INCA_IP_Switch_EPHY_DL (1 << 3)
-#define INCA_IP_Switch_EPHY_DP (1 << 2)
-#define INCA_IP_Switch_EPHY_PL (1 << 1)
-#define INCA_IP_Switch_EPHY_PP (1 << 0)
-
-/***Pause Write Enable Register***/
-#define INCA_IP_Switch_PWR_EN ((volatile u32*)(INCA_IP_Switch+ 0x0488))
-#define INCA_IP_Switch_PWR_EN_PL (1 << 1)
-#define INCA_IP_Switch_PWR_EN_PP (1 << 0)
-
-/***MDIO Configuration Register***/
-#define INCA_IP_Switch_MDIO_CFG ((volatile u32*)(INCA_IP_Switch+ 0x048C))
-#define INCA_IP_Switch_MDIO_CFG_MDS (value) (((( 1 << 2) - 1) & (value)) << 14)
-#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value) (((( 1 << 5) - 1) & (value)) << 9)
-#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value) (((( 1 << 5) - 1) & (value)) << 4)
-#define INCA_IP_Switch_MDIO_CFG_UEP (1 << 3)
-#define INCA_IP_Switch_MDIO_CFG_PS (1 << 2)
-#define INCA_IP_Switch_MDIO_CFG_PT (1 << 1)
-#define INCA_IP_Switch_MDIO_CFG_UMM (1 << 0)
-
-/***Clock Configuration Register***/
-#define INCA_IP_Switch_CLK_CFG ((volatile u32*)(INCA_IP_Switch+ 0x0500))
-#define INCA_IP_Switch_CLK_CFG_ARL_ID (1 << 9)
-#define INCA_IP_Switch_CLK_CFG_CPU_ID (1 << 8)
-#define INCA_IP_Switch_CLK_CFG_LAN_ID (1 << 7)
-#define INCA_IP_Switch_CLK_CFG_PC_ID (1 << 6)
-#define INCA_IP_Switch_CLK_CFG_SE_ID (1 << 5)
-
-/***********************************************************************/
-/* Module : SSC1 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_SSC1 (0xB8000500)
-/***********************************************************************/
-
-
-/***Control Register (Programming Mode)***/
-#define INCA_IP_SSC1_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
-#define INCA_IP_SSC1_SCC_CON_PRG_EN (1 << 15)
-#define INCA_IP_SSC1_SCC_CON_PRG_MS (1 << 14)
-#define INCA_IP_SSC1_SCC_CON_PRG_AREN (1 << 12)
-#define INCA_IP_SSC1_SCC_CON_PRG_BEN (1 << 11)
-#define INCA_IP_SSC1_SCC_CON_PRG_PEN (1 << 10)
-#define INCA_IP_SSC1_SCC_CON_PRG_REN (1 << 9)
-#define INCA_IP_SSC1_SCC_CON_PRG_TEN (1 << 8)
-#define INCA_IP_SSC1_SCC_CON_PRG_LB (1 << 7)
-#define INCA_IP_SSC1_SCC_CON_PRG_PO (1 << 6)
-#define INCA_IP_SSC1_SCC_CON_PRG_PH (1 << 5)
-#define INCA_IP_SSC1_SCC_CON_PRG_HB (1 << 4)
-#define INCA_IP_SSC1_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***SCC Control Register (Operating Mode)***/
-#define INCA_IP_SSC1_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC1+ 0x0010))
-#define INCA_IP_SSC1_SCC_CON_OPR_EN (1 << 15)
-#define INCA_IP_SSC1_SCC_CON_OPR_MS (1 << 14)
-#define INCA_IP_SSC1_SCC_CON_OPR_BSY (1 << 12)
-#define INCA_IP_SSC1_SCC_CON_OPR_BE (1 << 11)
-#define INCA_IP_SSC1_SCC_CON_OPR_PE (1 << 10)
-#define INCA_IP_SSC1_SCC_CON_OPR_RE (1 << 9)
-#define INCA_IP_SSC1_SCC_CON_OPR_TE (1 << 8)
-#define INCA_IP_SSC1_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***SSC Write Hardware Modified Control Register***/
-#define INCA_IP_SSC1_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC1+ 0x0040))
-#define INCA_IP_SSC1_SSC_WHBCON_SETBE (1 << 15)
-#define INCA_IP_SSC1_SSC_WHBCON_SETPE (1 << 14)
-#define INCA_IP_SSC1_SSC_WHBCON_SETRE (1 << 13)
-#define INCA_IP_SSC1_SSC_WHBCON_SETTE (1 << 12)
-#define INCA_IP_SSC1_SSC_WHBCON_CLRBE (1 << 11)
-#define INCA_IP_SSC1_SSC_WHBCON_CLRPE (1 << 10)
-#define INCA_IP_SSC1_SSC_WHBCON_CLRRE (1 << 9)
-#define INCA_IP_SSC1_SSC_WHBCON_CLRTE (1 << 8)
-
-/***SSC Baudrate Timer Reload Register***/
-#define INCA_IP_SSC1_SSC_BR ((volatile u32*)(INCA_IP_SSC1+ 0x0014))
-#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Transmitter Buffer Register***/
-#define INCA_IP_SSC1_SSC_TB ((volatile u32*)(INCA_IP_SSC1+ 0x0020))
-#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Receiver Buffer Register***/
-#define INCA_IP_SSC1_SSC_RB ((volatile u32*)(INCA_IP_SSC1+ 0x0024))
-#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Receive FIFO Control Register***/
-#define INCA_IP_SSC1_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0030))
-#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN (1 << 2)
-#define INCA_IP_SSC1_SSC_RXFCON_RXFLU (1 << 1)
-#define INCA_IP_SSC1_SSC_RXFCON_RXFEN (1 << 0)
-
-/***SSC Transmit FIFO Control Register***/
-#define INCA_IP_SSC1_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0034))
-#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN (1 << 2)
-#define INCA_IP_SSC1_SSC_TXFCON_TXFLU (1 << 1)
-#define INCA_IP_SSC1_SSC_TXFCON_TXFEN (1 << 0)
-
-/***SSC FIFO Status Register***/
-#define INCA_IP_SSC1_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC1+ 0x0038))
-#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***SSC Clock Control Register***/
-#define INCA_IP_SSC1_SSC_CLC ((volatile u32*)(INCA_IP_SSC1+ 0x0000))
-#define INCA_IP_SSC1_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_SSC1_SSC_CLC_DISS (1 << 1)
-#define INCA_IP_SSC1_SSC_CLC_DISR (1 << 0)
-
-/***********************************************************************/
-/* Module : SSC2 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_SSC2 (0xB8000600)
-/***********************************************************************/
-
-
-/***Control Register (Programming Mode)***/
-#define INCA_IP_SSC2_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
-#define INCA_IP_SSC2_SCC_CON_PRG_EN (1 << 15)
-#define INCA_IP_SSC2_SCC_CON_PRG_MS (1 << 14)
-#define INCA_IP_SSC2_SCC_CON_PRG_AREN (1 << 12)
-#define INCA_IP_SSC2_SCC_CON_PRG_BEN (1 << 11)
-#define INCA_IP_SSC2_SCC_CON_PRG_PEN (1 << 10)
-#define INCA_IP_SSC2_SCC_CON_PRG_REN (1 << 9)
-#define INCA_IP_SSC2_SCC_CON_PRG_TEN (1 << 8)
-#define INCA_IP_SSC2_SCC_CON_PRG_LB (1 << 7)
-#define INCA_IP_SSC2_SCC_CON_PRG_PO (1 << 6)
-#define INCA_IP_SSC2_SCC_CON_PRG_PH (1 << 5)
-#define INCA_IP_SSC2_SCC_CON_PRG_HB (1 << 4)
-#define INCA_IP_SSC2_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***SCC Control Register (Operating Mode)***/
-#define INCA_IP_SSC2_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC2+ 0x0010))
-#define INCA_IP_SSC2_SCC_CON_OPR_EN (1 << 15)
-#define INCA_IP_SSC2_SCC_CON_OPR_MS (1 << 14)
-#define INCA_IP_SSC2_SCC_CON_OPR_BSY (1 << 12)
-#define INCA_IP_SSC2_SCC_CON_OPR_BE (1 << 11)
-#define INCA_IP_SSC2_SCC_CON_OPR_PE (1 << 10)
-#define INCA_IP_SSC2_SCC_CON_OPR_RE (1 << 9)
-#define INCA_IP_SSC2_SCC_CON_OPR_TE (1 << 8)
-#define INCA_IP_SSC2_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***SSC Write Hardware Modified Control Register***/
-#define INCA_IP_SSC2_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC2+ 0x0040))
-#define INCA_IP_SSC2_SSC_WHBCON_SETBE (1 << 15)
-#define INCA_IP_SSC2_SSC_WHBCON_SETPE (1 << 14)
-#define INCA_IP_SSC2_SSC_WHBCON_SETRE (1 << 13)
-#define INCA_IP_SSC2_SSC_WHBCON_SETTE (1 << 12)
-#define INCA_IP_SSC2_SSC_WHBCON_CLRBE (1 << 11)
-#define INCA_IP_SSC2_SSC_WHBCON_CLRPE (1 << 10)
-#define INCA_IP_SSC2_SSC_WHBCON_CLRRE (1 << 9)
-#define INCA_IP_SSC2_SSC_WHBCON_CLRTE (1 << 8)
-
-/***SSC Baudrate Timer Reload Register***/
-#define INCA_IP_SSC2_SSC_BR ((volatile u32*)(INCA_IP_SSC2+ 0x0014))
-#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Transmitter Buffer Register***/
-#define INCA_IP_SSC2_SSC_TB ((volatile u32*)(INCA_IP_SSC2+ 0x0020))
-#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Receiver Buffer Register***/
-#define INCA_IP_SSC2_SSC_RB ((volatile u32*)(INCA_IP_SSC2+ 0x0024))
-#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***SSC Receive FIFO Control Register***/
-#define INCA_IP_SSC2_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0030))
-#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN (1 << 2)
-#define INCA_IP_SSC2_SSC_RXFCON_RXFLU (1 << 1)
-#define INCA_IP_SSC2_SSC_RXFCON_RXFEN (1 << 0)
-
-/***SSC Transmit FIFO Control Register***/
-#define INCA_IP_SSC2_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0034))
-#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN (1 << 2)
-#define INCA_IP_SSC2_SSC_TXFCON_TXFLU (1 << 1)
-#define INCA_IP_SSC2_SSC_TXFCON_TXFEN (1 << 0)
-
-/***SSC FIFO Status Register***/
-#define INCA_IP_SSC2_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC2+ 0x0038))
-#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***SSC Clock Control Register***/
-#define INCA_IP_SSC2_SSC_CLC ((volatile u32*)(INCA_IP_SSC2+ 0x0000))
-#define INCA_IP_SSC2_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_SSC2_SSC_CLC_DISS (1 << 1)
-#define INCA_IP_SSC2_SSC_CLC_DISR (1 << 0)
-
-/***********************************************************************/
-/* Module : EBU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_EBU (0xB8000200)
-/***********************************************************************/
-
-
-/***EBU Clock Control Register***/
-#define INCA_IP_EBU_EBU_CLC ((volatile u32*)(INCA_IP_EBU+ 0x0000))
-#define INCA_IP_EBU_EBU_CLC_DISS (1 << 1)
-#define INCA_IP_EBU_EBU_CLC_DISR (1 << 0)
-
-/***EBU Global Control Register***/
-#define INCA_IP_EBU_EBU_CON ((volatile u32*)(INCA_IP_EBU+ 0x0010))
-#define INCA_IP_EBU_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20)
-#define INCA_IP_EBU_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16)
-#define INCA_IP_EBU_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_EBU_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_EBU_EBU_CON_ARBSYNC (1 << 5)
-#define INCA_IP_EBU_EBU_CON_1 (1 << 3)
-
-/***EBU Address Select Register 0***/
-#define INCA_IP_EBU_EBU_ADDSEL0 ((volatile u32*)(INCA_IP_EBU+ 0x0020))
-#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE (1 << 1)
-#define INCA_IP_EBU_EBU_ADDSEL0_REGEN (1 << 0)
-
-/***EBU Address Select Register 1***/
-#define INCA_IP_EBU_EBU_ADDSEL1 ((volatile u32*)(INCA_IP_EBU+ 0x0024))
-#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE (1 << 1)
-#define INCA_IP_EBU_EBU_ADDSEL1_REGEN (1 << 0)
-
-/***EBU Address Select Register 2***/
-#define INCA_IP_EBU_EBU_ADDSEL2 ((volatile u32*)(INCA_IP_EBU+ 0x0028))
-#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE (1 << 1)
-#define INCA_IP_EBU_EBU_ADDSEL2_REGEN (1 << 0)
-
-/***EBU Bus Configuration Register 0***/
-#define INCA_IP_EBU_EBU_BUSCON0 ((volatile u32*)(INCA_IP_EBU+ 0x0060))
-#define INCA_IP_EBU_EBU_BUSCON0_WRDIS (1 << 31)
-#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define INCA_IP_EBU_EBU_BUSCON0_WAITINV (1 << 19)
-#define INCA_IP_EBU_EBU_BUSCON0_SETUP (1 << 18)
-#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 1***/
-#define INCA_IP_EBU_EBU_BUSCON1 ((volatile u32*)(INCA_IP_EBU+ 0x0064))
-#define INCA_IP_EBU_EBU_BUSCON1_WRDIS (1 << 31)
-#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define INCA_IP_EBU_EBU_BUSCON1_WAITINV (1 << 19)
-#define INCA_IP_EBU_EBU_BUSCON1_SETUP (1 << 18)
-#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 2***/
-#define INCA_IP_EBU_EBU_BUSCON2 ((volatile u32*)(INCA_IP_EBU+ 0x0068))
-#define INCA_IP_EBU_EBU_BUSCON2_WRDIS (1 << 31)
-#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define INCA_IP_EBU_EBU_BUSCON2_WAITINV (1 << 19)
-#define INCA_IP_EBU_EBU_BUSCON2_SETUP (1 << 18)
-#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : SDRAM register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_SDRAM (0xBF800000)
-/***********************************************************************/
-
-
-/***MC Access Error Cause Register***/
-#define INCA_IP_SDRAM_MC_ERRCAUSE ((volatile u32*)(INCA_IP_SDRAM+ 0x0100))
-#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
-#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN)
-
-/***MC Access Error Address Register***/
-#define INCA_IP_SDRAM_MC_ERRADDR ((volatile u32*)(INCA_IP_SDRAM+ 0x0108))
-#define INCA_IP_SDRAM_MC_ERRADDR_ADDR
-
-/***MC I/O General Purpose Register***/
-#define INCA_IP_SDRAM_MC_IOGP ((volatile u32*)(INCA_IP_SDRAM+ 0x0800))
-#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28)
-#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20)
-#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define INCA_IP_SDRAM_MC_IOGP_CPS (1 << 11)
-#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***MC Self Refresh Register***/
-#define INCA_IP_SDRAM_MC_SELFRFSH ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00))
-#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
-#define INCA_IP_SDRAM_MC_SELFRFSH_PWD (1 << 0)
-#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2)
-
-/***MC Enable Register***/
-#define INCA_IP_SDRAM_MC_CTRLENA ((volatile u32*)(INCA_IP_SDRAM+ 0x1000))
-#define INCA_IP_SDRAM_MC_CTRLENA_ENA (1 << 0)
-#define INCA_IP_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1)
-
-/***MC Mode Register Setup Code***/
-#define INCA_IP_SDRAM_MC_MRSCODE ((volatile u32*)(INCA_IP_SDRAM+ 0x1008))
-#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7)
-#define INCA_IP_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4)
-#define INCA_IP_SDRAM_MC_MRSCODE_WT (1 << 3)
-#define INCA_IP_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***MC Configuration Data-word Width Register***/
-#define INCA_IP_SDRAM_MC_CFGDW ((volatile u32*)(INCA_IP_SDRAM+ 0x1010))
-#define INCA_IP_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define INCA_IP_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4)
-
-/***MC Configuration Physical Bank 0 Register***/
-#define INCA_IP_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP_SDRAM+ 0x1018))
-#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define INCA_IP_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16)
-
-/***MC Latency Register***/
-#define INCA_IP_SDRAM_MC_LATENCY ((volatile u32*)(INCA_IP_SDRAM+ 0x1038))
-#define INCA_IP_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define INCA_IP_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20)
-
-/***MC Refresh Cycle Time Register***/
-#define INCA_IP_SDRAM_MC_TREFRESH ((volatile u32*)(INCA_IP_SDRAM+ 0x1040))
-#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0)
-#define INCA_IP_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
-
-/***********************************************************************/
-/* Module : GPTU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_GPTU (0xB8000300)
-/***********************************************************************/
-
-
-/***GPT Clock Control Register***/
-#define INCA_IP_GPTU_GPT_CLC ((volatile u32*)(INCA_IP_GPTU+ 0x0000))
-#define INCA_IP_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_GPTU_GPT_CLC_DISS (1 << 1)
-#define INCA_IP_GPTU_GPT_CLC_DISR (1 << 0)
-
-/***GPT Timer 3 Control Register***/
-#define INCA_IP_GPTU_GPT_T3CON ((volatile u32*)(INCA_IP_GPTU+ 0x0014))
-#define INCA_IP_GPTU_GPT_T3CON_T3RDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_T3CON_T3EDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define INCA_IP_GPTU_GPT_T3CON_T3OTL (1 << 10)
-#define INCA_IP_GPTU_GPT_T3CON_T3UD (1 << 7)
-#define INCA_IP_GPTU_GPT_T3CON_T3R (1 << 6)
-#define INCA_IP_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write Hardware Modified Timer 3 Control Register
-If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define INCA_IP_GPTU_GPT_WHBT3CON ((volatile u32*)(INCA_IP_GPTU+ 0x004C))
-#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12)
-#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11)
-#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10)
-
-/***GPT Timer 2 Control Register***/
-#define INCA_IP_GPTU_GPT_T2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0010))
-#define INCA_IP_GPTU_GPT_T2CON_TxRDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_T2CON_TxEDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS (1 << 12)
-#define INCA_IP_GPTU_GPT_T2CON_TxRC (1 << 9)
-#define INCA_IP_GPTU_GPT_T2CON_TxUD (1 << 7)
-#define INCA_IP_GPTU_GPT_T2CON_TxR (1 << 6)
-#define INCA_IP_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Control Register***/
-#define INCA_IP_GPTU_GPT_T4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0018))
-#define INCA_IP_GPTU_GPT_T4CON_TxRDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_T4CON_TxEDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS (1 << 12)
-#define INCA_IP_GPTU_GPT_T4CON_TxRC (1 << 9)
-#define INCA_IP_GPTU_GPT_T4CON_TxUD (1 << 7)
-#define INCA_IP_GPTU_GPT_T4CON_TxR (1 << 6)
-#define INCA_IP_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 2 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define INCA_IP_GPTU_GPT_WHBT2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0048))
-#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12)
-
-/***GPT Write HW Modified Timer 4 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define INCA_IP_GPTU_GPT_WHBT4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0050))
-#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15)
-#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14)
-#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13)
-#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12)
-
-/***GPT Capture Reload Register***/
-#define INCA_IP_GPTU_GPT_CAPREL ((volatile u32*)(INCA_IP_GPTU+ 0x0030))
-#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 2 Register***/
-#define INCA_IP_GPTU_GPT_T2 ((volatile u32*)(INCA_IP_GPTU+ 0x0034))
-#define INCA_IP_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 3 Register***/
-#define INCA_IP_GPTU_GPT_T3 ((volatile u32*)(INCA_IP_GPTU+ 0x0038))
-#define INCA_IP_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Register***/
-#define INCA_IP_GPTU_GPT_T4 ((volatile u32*)(INCA_IP_GPTU+ 0x003C))
-#define INCA_IP_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 5 Register***/
-#define INCA_IP_GPTU_GPT_T5 ((volatile u32*)(INCA_IP_GPTU+ 0x0040))
-#define INCA_IP_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Register***/
-#define INCA_IP_GPTU_GPT_T6 ((volatile u32*)(INCA_IP_GPTU+ 0x0044))
-#define INCA_IP_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Control Register***/
-#define INCA_IP_GPTU_GPT_T6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0020))
-#define INCA_IP_GPTU_GPT_T6CON_T6SR (1 << 15)
-#define INCA_IP_GPTU_GPT_T6CON_T6CLR (1 << 14)
-#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define INCA_IP_GPTU_GPT_T6CON_T6OTL (1 << 10)
-#define INCA_IP_GPTU_GPT_T6CON_T6UD (1 << 7)
-#define INCA_IP_GPTU_GPT_T6CON_T6R (1 << 6)
-#define INCA_IP_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 6 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define INCA_IP_GPTU_GPT_WHBT6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0054))
-#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11)
-#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10)
-
-/***GPT Timer 5 Control Register***/
-#define INCA_IP_GPTU_GPT_T5CON ((volatile u32*)(INCA_IP_GPTU+ 0x001C))
-#define INCA_IP_GPTU_GPT_T5CON_T5SC (1 << 15)
-#define INCA_IP_GPTU_GPT_T5CON_T5CLR (1 << 14)
-#define INCA_IP_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12)
-#define INCA_IP_GPTU_GPT_T5CON_T5CC (1 << 11)
-#define INCA_IP_GPTU_GPT_T5CON_CT3 (1 << 10)
-#define INCA_IP_GPTU_GPT_T5CON_T5RC (1 << 9)
-#define INCA_IP_GPTU_GPT_T5CON_T5UDE (1 << 8)
-#define INCA_IP_GPTU_GPT_T5CON_T5UD (1 << 7)
-#define INCA_IP_GPTU_GPT_T5CON_T5R (1 << 6)
-#define INCA_IP_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : IOM register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_IOM (0xBF105000)
-/***********************************************************************/
-
-
-/***Receive FIFO***/
-#define INCA_IP_IOM_RFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000))
-#define INCA_IP_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Transmit FIFO***/
-#define INCA_IP_IOM_XFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000))
-#define INCA_IP_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Interrupt Status Register HDLC***/
-#define INCA_IP_IOM_ISTAH ((volatile u32*)(INCA_IP_IOM+ 0x0080))
-#define INCA_IP_IOM_ISTAH_RME (1 << 7)
-#define INCA_IP_IOM_ISTAH_RPF (1 << 6)
-#define INCA_IP_IOM_ISTAH_RFO (1 << 5)
-#define INCA_IP_IOM_ISTAH_XPR (1 << 4)
-#define INCA_IP_IOM_ISTAH_XMR (1 << 3)
-#define INCA_IP_IOM_ISTAH_XDU (1 << 2)
-
-/***Interrupt Mask Register HDLC***/
-#define INCA_IP_IOM_MASKH ((volatile u32*)(INCA_IP_IOM+ 0x0080))
-#define INCA_IP_IOM_MASKH_RME (1 << 7)
-#define INCA_IP_IOM_MASKH_RPF (1 << 6)
-#define INCA_IP_IOM_MASKH_RFO (1 << 5)
-#define INCA_IP_IOM_MASKH_XPR (1 << 4)
-#define INCA_IP_IOM_MASKH_XMR (1 << 3)
-#define INCA_IP_IOM_MASKH_XDU (1 << 2)
-
-/***Status Register***/
-#define INCA_IP_IOM_STAR ((volatile u32*)(INCA_IP_IOM+ 0x0084))
-#define INCA_IP_IOM_STAR_XDOV (1 << 7)
-#define INCA_IP_IOM_STAR_XFW (1 << 6)
-#define INCA_IP_IOM_STAR_RACI (1 << 3)
-#define INCA_IP_IOM_STAR_XACI (1 << 1)
-
-/***Command Register***/
-#define INCA_IP_IOM_CMDR ((volatile u32*)(INCA_IP_IOM+ 0x0084))
-#define INCA_IP_IOM_CMDR_RMC (1 << 7)
-#define INCA_IP_IOM_CMDR_RRES (1 << 6)
-#define INCA_IP_IOM_CMDR_XTF (1 << 3)
-#define INCA_IP_IOM_CMDR_XME (1 << 1)
-#define INCA_IP_IOM_CMDR_XRES (1 << 0)
-
-/***Mode Register***/
-#define INCA_IP_IOM_MODEH ((volatile u32*)(INCA_IP_IOM+ 0x0088))
-#define INCA_IP_IOM_MODEH_MDS2 (1 << 7)
-#define INCA_IP_IOM_MODEH_MDS1 (1 << 6)
-#define INCA_IP_IOM_MODEH_MDS0 (1 << 5)
-#define INCA_IP_IOM_MODEH_RAC (1 << 3)
-#define INCA_IP_IOM_MODEH_DIM2 (1 << 2)
-#define INCA_IP_IOM_MODEH_DIM1 (1 << 1)
-#define INCA_IP_IOM_MODEH_DIM0 (1 << 0)
-
-/***Extended Mode Register***/
-#define INCA_IP_IOM_EXMR ((volatile u32*)(INCA_IP_IOM+ 0x008C))
-#define INCA_IP_IOM_EXMR_XFBS (1 << 7)
-#define INCA_IP_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5)
-#define INCA_IP_IOM_EXMR_SRA (1 << 4)
-#define INCA_IP_IOM_EXMR_XCRC (1 << 3)
-#define INCA_IP_IOM_EXMR_RCRC (1 << 2)
-#define INCA_IP_IOM_EXMR_ITF (1 << 0)
-
-/***SAPI1 Register***/
-#define INCA_IP_IOM_SAP1 ((volatile u32*)(INCA_IP_IOM+ 0x0094))
-#define INCA_IP_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define INCA_IP_IOM_SAP1_MHA (1 << 0)
-
-/***Receive Frame Byte Count Low***/
-#define INCA_IP_IOM_RBCL ((volatile u32*)(INCA_IP_IOM+ 0x0098))
-#define INCA_IP_IOM_RBCL_RBC(value) (1 << value)
-
-
-/***SAPI2 Register***/
-#define INCA_IP_IOM_SAP2 ((volatile u32*)(INCA_IP_IOM+ 0x0098))
-#define INCA_IP_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define INCA_IP_IOM_SAP2_MLA (1 << 0)
-
-/***Receive Frame Byte Count High***/
-#define INCA_IP_IOM_RBCH ((volatile u32*)(INCA_IP_IOM+ 0x009C))
-#define INCA_IP_IOM_RBCH_OV (1 << 4)
-#define INCA_IP_IOM_RBCH_RBC11 (1 << 3)
-#define INCA_IP_IOM_RBCH_RBC10 (1 << 2)
-#define INCA_IP_IOM_RBCH_RBC9 (1 << 1)
-#define INCA_IP_IOM_RBCH_RBC8 (1 << 0)
-
-/***TEI1 Register 1***/
-#define INCA_IP_IOM_TEI1 ((volatile u32*)(INCA_IP_IOM+ 0x009C))
-#define INCA_IP_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define INCA_IP_IOM_TEI1_EA (1 << 0)
-
-/***Receive Status Register***/
-#define INCA_IP_IOM_RSTA ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
-#define INCA_IP_IOM_RSTA_VFR (1 << 7)
-#define INCA_IP_IOM_RSTA_RDO (1 << 6)
-#define INCA_IP_IOM_RSTA_CRC (1 << 5)
-#define INCA_IP_IOM_RSTA_RAB (1 << 4)
-#define INCA_IP_IOM_RSTA_SA1 (1 << 3)
-#define INCA_IP_IOM_RSTA_SA0 (1 << 2)
-#define INCA_IP_IOM_RSTA_TA (1 << 0)
-#define INCA_IP_IOM_RSTA_CR (1 << 1)
-
-/***TEI2 Register***/
-#define INCA_IP_IOM_TEI2 ((volatile u32*)(INCA_IP_IOM+ 0x00A0))
-#define INCA_IP_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define INCA_IP_IOM_TEI2_EA (1 << 0)
-
-/***Test Mode Register HDLC***/
-#define INCA_IP_IOM_TMH ((volatile u32*)(INCA_IP_IOM+ 0x00A4))
-#define INCA_IP_IOM_TMH_TLP (1 << 0)
-
-/***Command/Indication Receive 0***/
-#define INCA_IP_IOM_CIR0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
-#define INCA_IP_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_IOM_CIR0_CIC0 (1 << 3)
-#define INCA_IP_IOM_CIR0_CIC1 (1 << 2)
-#define INCA_IP_IOM_CIR0_SG (1 << 1)
-#define INCA_IP_IOM_CIR0_BAS (1 << 0)
-
-/***Command/Indication Transmit 0***/
-#define INCA_IP_IOM_CIX0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8))
-#define INCA_IP_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define INCA_IP_IOM_CIX0_TBA2 (1 << 3)
-#define INCA_IP_IOM_CIX0_TBA1 (1 << 2)
-#define INCA_IP_IOM_CIX0_TBA0 (1 << 1)
-#define INCA_IP_IOM_CIX0_BAC (1 << 0)
-
-/***Command/Indication Receive 1***/
-#define INCA_IP_IOM_CIR1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
-#define INCA_IP_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-
-/***Command/Indication Transmit 1***/
-#define INCA_IP_IOM_CIX1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC))
-#define INCA_IP_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define INCA_IP_IOM_CIX1_CICW (1 << 1)
-#define INCA_IP_IOM_CIX1_CI1E (1 << 0)
-
-/***Controller Data Access Reg. (CH10)***/
-#define INCA_IP_IOM_CDA10 ((volatile u32*)(INCA_IP_IOM+ 0x0100))
-#define INCA_IP_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH11)***/
-#define INCA_IP_IOM_CDA11 ((volatile u32*)(INCA_IP_IOM+ 0x0104))
-#define INCA_IP_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH20)***/
-#define INCA_IP_IOM_CDA20 ((volatile u32*)(INCA_IP_IOM+ 0x0108))
-#define INCA_IP_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH21)***/
-#define INCA_IP_IOM_CDA21 ((volatile u32*)(INCA_IP_IOM+ 0x010C))
-#define INCA_IP_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define INCA_IP_IOM_CDA_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0110))
-#define INCA_IP_IOM_CDA_TSDP10_DPS (1 << 7)
-#define INCA_IP_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define INCA_IP_IOM_CDA_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0114))
-#define INCA_IP_IOM_CDA_TSDP11_DPS (1 << 7)
-#define INCA_IP_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define INCA_IP_IOM_CDA_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0118))
-#define INCA_IP_IOM_CDA_TSDP20_DPS (1 << 7)
-#define INCA_IP_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define INCA_IP_IOM_CDA_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x011C))
-#define INCA_IP_IOM_CDA_TSDP21_DPS (1 << 7)
-#define INCA_IP_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define INCA_IP_IOM_CO_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0120))
-#define INCA_IP_IOM_CO_TSDP10_DPS (1 << 7)
-#define INCA_IP_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define INCA_IP_IOM_CO_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0124))
-#define INCA_IP_IOM_CO_TSDP11_DPS (1 << 7)
-#define INCA_IP_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define INCA_IP_IOM_CO_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0128))
-#define INCA_IP_IOM_CO_TSDP20_DPS (1 << 7)
-#define INCA_IP_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define INCA_IP_IOM_CO_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x012C))
-#define INCA_IP_IOM_CO_TSDP21_DPS (1 << 7)
-#define INCA_IP_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define INCA_IP_IOM_CDA1_CR ((volatile u32*)(INCA_IP_IOM+ 0x0138))
-#define INCA_IP_IOM_CDA1_CR_EN_TBM (1 << 5)
-#define INCA_IP_IOM_CDA1_CR_EN_I1 (1 << 4)
-#define INCA_IP_IOM_CDA1_CR_EN_I0 (1 << 3)
-#define INCA_IP_IOM_CDA1_CR_EN_O1 (1 << 2)
-#define INCA_IP_IOM_CDA1_CR_EN_O0 (1 << 1)
-#define INCA_IP_IOM_CDA1_CR_SWAP (1 << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define INCA_IP_IOM_CDA2_CR ((volatile u32*)(INCA_IP_IOM+ 0x013C))
-#define INCA_IP_IOM_CDA2_CR_EN_TBM (1 << 5)
-#define INCA_IP_IOM_CDA2_CR_EN_I1 (1 << 4)
-#define INCA_IP_IOM_CDA2_CR_EN_I0 (1 << 3)
-#define INCA_IP_IOM_CDA2_CR_EN_O1 (1 << 2)
-#define INCA_IP_IOM_CDA2_CR_EN_O0 (1 << 1)
-#define INCA_IP_IOM_CDA2_CR_SWAP (1 << 0)
-
-/***Control Register B-Channel Data***/
-#define INCA_IP_IOM_BCHA_CR ((volatile u32*)(INCA_IP_IOM+ 0x0144))
-#define INCA_IP_IOM_BCHA_CR_EN_BC2 (1 << 4)
-#define INCA_IP_IOM_BCHA_CR_EN_BC1 (1 << 3)
-
-/***Control Register B-Channel Data***/
-#define INCA_IP_IOM_BCHB_CR ((volatile u32*)(INCA_IP_IOM+ 0x0148))
-#define INCA_IP_IOM_BCHB_CR_EN_BC2 (1 << 4)
-#define INCA_IP_IOM_BCHB_CR_EN_BC1 (1 << 3)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define INCA_IP_IOM_DCI_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C))
-#define INCA_IP_IOM_DCI_CR_DPS_CI1 (1 << 7)
-#define INCA_IP_IOM_DCI_CR_EN_CI1 (1 << 6)
-#define INCA_IP_IOM_DCI_CR_EN_D (1 << 5)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define INCA_IP_IOM_DCIC_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C))
-#define INCA_IP_IOM_DCIC_CR_DPS_CI0 (1 << 7)
-#define INCA_IP_IOM_DCIC_CR_EN_CI0 (1 << 6)
-#define INCA_IP_IOM_DCIC_CR_DPS_D (1 << 5)
-
-/***Control Reg. Serial Data Strobe x***/
-#define INCA_IP_IOM_SDS_CR ((volatile u32*)(INCA_IP_IOM+ 0x0154))
-#define INCA_IP_IOM_SDS_CR_ENS_TSS (1 << 7)
-#define INCA_IP_IOM_SDS_CR_ENS_TSS_1 (1 << 6)
-#define INCA_IP_IOM_SDS_CR_ENS_TSS_3 (1 << 5)
-#define INCA_IP_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Control Register IOM Data***/
-#define INCA_IP_IOM_IOM_CR ((volatile u32*)(INCA_IP_IOM+ 0x015C))
-#define INCA_IP_IOM_IOM_CR_SPU (1 << 7)
-#define INCA_IP_IOM_IOM_CR_CI_CS (1 << 5)
-#define INCA_IP_IOM_IOM_CR_TIC_DIS (1 << 4)
-#define INCA_IP_IOM_IOM_CR_EN_BCL (1 << 3)
-#define INCA_IP_IOM_IOM_CR_CLKM (1 << 2)
-#define INCA_IP_IOM_IOM_CR_Res (1 << 1)
-#define INCA_IP_IOM_IOM_CR_DIS_IOM (1 << 0)
-
-/***Synchronous Transfer Interrupt***/
-#define INCA_IP_IOM_STI ((volatile u32*)(INCA_IP_IOM+ 0x0160))
-#define INCA_IP_IOM_STI_STOV21 (1 << 7)
-#define INCA_IP_IOM_STI_STOV20 (1 << 6)
-#define INCA_IP_IOM_STI_STOV11 (1 << 5)
-#define INCA_IP_IOM_STI_STOV10 (1 << 4)
-#define INCA_IP_IOM_STI_STI21 (1 << 3)
-#define INCA_IP_IOM_STI_STI20 (1 << 2)
-#define INCA_IP_IOM_STI_STI11 (1 << 1)
-#define INCA_IP_IOM_STI_STI10 (1 << 0)
-
-/***Acknowledge Synchronous Transfer Interrupt***/
-#define INCA_IP_IOM_ASTI ((volatile u32*)(INCA_IP_IOM+ 0x0160))
-#define INCA_IP_IOM_ASTI_ACK21 (1 << 3)
-#define INCA_IP_IOM_ASTI_ACK20 (1 << 2)
-#define INCA_IP_IOM_ASTI_ACK11 (1 << 1)
-#define INCA_IP_IOM_ASTI_ACK10 (1 << 0)
-
-/***Mask Synchronous Transfer Interrupt***/
-#define INCA_IP_IOM_MSTI ((volatile u32*)(INCA_IP_IOM+ 0x0164))
-#define INCA_IP_IOM_MSTI_STOV21 (1 << 7)
-#define INCA_IP_IOM_MSTI_STOV20 (1 << 6)
-#define INCA_IP_IOM_MSTI_STOV11 (1 << 5)
-#define INCA_IP_IOM_MSTI_STOV10 (1 << 4)
-#define INCA_IP_IOM_MSTI_STI21 (1 << 3)
-#define INCA_IP_IOM_MSTI_STI20 (1 << 2)
-#define INCA_IP_IOM_MSTI_STI11 (1 << 1)
-#define INCA_IP_IOM_MSTI_STI10 (1 << 0)
-
-/***Configuration Register for Serial Data Strobes***/
-#define INCA_IP_IOM_SDS_CONF ((volatile u32*)(INCA_IP_IOM+ 0x0168))
-#define INCA_IP_IOM_SDS_CONF_SDS_BCL (1 << 0)
-
-/***Monitoring CDA Bits***/
-#define INCA_IP_IOM_MCDA ((volatile u32*)(INCA_IP_IOM+ 0x016C))
-#define INCA_IP_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : ASC register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_ASC (0xB8000400)
-/***********************************************************************/
-
-
-/***ASC Port Input Select Register***/
-#define INCA_IP_ASC_ASC_PISEL ((volatile u32*)(INCA_IP_ASC+ 0x0004))
-#define INCA_IP_ASC_ASC_PISEL_RIS (1 << 0)
-
-/***ASC Control Register***/
-#define INCA_IP_ASC_ASC_CON ((volatile u32*)(INCA_IP_ASC+ 0x0010))
-#define INCA_IP_ASC_ASC_CON_R (1 << 15)
-#define INCA_IP_ASC_ASC_CON_LB (1 << 14)
-#define INCA_IP_ASC_ASC_CON_BRS (1 << 13)
-#define INCA_IP_ASC_ASC_CON_ODD (1 << 12)
-#define INCA_IP_ASC_ASC_CON_FDE (1 << 11)
-#define INCA_IP_ASC_ASC_CON_OE (1 << 10)
-#define INCA_IP_ASC_ASC_CON_FE (1 << 9)
-#define INCA_IP_ASC_ASC_CON_PE (1 << 8)
-#define INCA_IP_ASC_ASC_CON_OEN (1 << 7)
-#define INCA_IP_ASC_ASC_CON_FEN (1 << 6)
-#define INCA_IP_ASC_ASC_CON_PENRXDI (1 << 5)
-#define INCA_IP_ASC_ASC_CON_REN (1 << 4)
-#define INCA_IP_ASC_ASC_CON_STP (1 << 3)
-#define INCA_IP_ASC_ASC_CON_M (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***ASC Write Hardware Modified Control Register***/
-#define INCA_IP_ASC_ASC_WHBCON ((volatile u32*)(INCA_IP_ASC+ 0x0050))
-#define INCA_IP_ASC_ASC_WHBCON_SETOE (1 << 13)
-#define INCA_IP_ASC_ASC_WHBCON_SETFE (1 << 12)
-#define INCA_IP_ASC_ASC_WHBCON_SETPE (1 << 11)
-#define INCA_IP_ASC_ASC_WHBCON_CLROE (1 << 10)
-#define INCA_IP_ASC_ASC_WHBCON_CLRFE (1 << 9)
-#define INCA_IP_ASC_ASC_WHBCON_CLRPE (1 << 8)
-#define INCA_IP_ASC_ASC_WHBCON_SETREN (1 << 5)
-#define INCA_IP_ASC_ASC_WHBCON_CLRREN (1 << 4)
-
-/***ASC Baudrate Timer/Reload Register***/
-#define INCA_IP_ASC_ASC_BTR ((volatile u32*)(INCA_IP_ASC+ 0x0014))
-#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value) (((( 1 << 13) - 1) & (value)) << 0)
-
-/***ASC Fractional Divider Register***/
-#define INCA_IP_ASC_ASC_FDV ((volatile u32*)(INCA_IP_ASC+ 0x0018))
-#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC IrDA Pulse Mode/Width Register***/
-#define INCA_IP_ASC_ASC_PMW ((volatile u32*)(INCA_IP_ASC+ 0x001C))
-#define INCA_IP_ASC_ASC_PMW_IRPW (1 << 8)
-#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***ASC Transmit Buffer Register***/
-#define INCA_IP_ASC_ASC_TBUF ((volatile u32*)(INCA_IP_ASC+ 0x0020))
-#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Receive Buffer Register***/
-#define INCA_IP_ASC_ASC_RBUF ((volatile u32*)(INCA_IP_ASC+ 0x0024))
-#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Autobaud Control Register***/
-#define INCA_IP_ASC_ASC_ABCON ((volatile u32*)(INCA_IP_ASC+ 0x0030))
-#define INCA_IP_ASC_ASC_ABCON_RXINV (1 << 11)
-#define INCA_IP_ASC_ASC_ABCON_TXINV (1 << 10)
-#define INCA_IP_ASC_ASC_ABCON_ABEM (value) (((( 1 << 2) - 1) & (value)) << 8)
-#define INCA_IP_ASC_ASC_ABCON_FCDETEN (1 << 4)
-#define INCA_IP_ASC_ASC_ABCON_ABDETEN (1 << 3)
-#define INCA_IP_ASC_ASC_ABCON_ABSTEN (1 << 2)
-#define INCA_IP_ASC_ASC_ABCON_AUREN (1 << 1)
-#define INCA_IP_ASC_ASC_ABCON_ABEN (1 << 0)
-
-/***Receive FIFO Control Register***/
-#define INCA_IP_ASC_RXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0040))
-#define INCA_IP_ASC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_ASC_RXFCON_RXTMEN (1 << 2)
-#define INCA_IP_ASC_RXFCON_RXFFLU (1 << 1)
-#define INCA_IP_ASC_RXFCON_RXFEN (1 << 0)
-
-/***Transmit FIFO Control Register***/
-#define INCA_IP_ASC_TXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0044))
-#define INCA_IP_ASC_TXFCON_TXFITL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_ASC_TXFCON_TXTMEN (1 << 2)
-#define INCA_IP_ASC_TXFCON_TXFFLU (1 << 1)
-#define INCA_IP_ASC_TXFCON_TXFEN (1 << 0)
-
-/***FIFO Status Register***/
-#define INCA_IP_ASC_FSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0048))
-#define INCA_IP_ASC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP_ASC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***ASC Write HW Modified Autobaud Control Register***/
-#define INCA_IP_ASC_ASC_WHBABCON ((volatile u32*)(INCA_IP_ASC+ 0x0054))
-#define INCA_IP_ASC_ASC_WHBABCON_SETABEN (1 << 1)
-#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN (1 << 0)
-
-/***ASC Autobaud Status Register***/
-#define INCA_IP_ASC_ASC_ABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0034))
-#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT (1 << 4)
-#define INCA_IP_ASC_ASC_ABSTAT_SCCDET (1 << 3)
-#define INCA_IP_ASC_ASC_ABSTAT_SCSDET (1 << 2)
-#define INCA_IP_ASC_ASC_ABSTAT_FCCDET (1 << 1)
-#define INCA_IP_ASC_ASC_ABSTAT_FCSDET (1 << 0)
-
-/***ASC Write HW Modified Autobaud Status Register***/
-#define INCA_IP_ASC_ASC_WHBABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0058))
-#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT (1 << 9)
-#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT (1 << 8)
-#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET (1 << 7)
-#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET (1 << 6)
-#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET (1 << 5)
-#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET (1 << 4)
-#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET (1 << 3)
-#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET (1 << 2)
-#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET (1 << 1)
-#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET (1 << 0)
-
-/***ASC Clock Control Register***/
-#define INCA_IP_ASC_ASC_CLC ((volatile u32*)(INCA_IP_ASC+ 0x0000))
-#define INCA_IP_ASC_ASC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_ASC_ASC_CLC_DISS (1 << 1)
-#define INCA_IP_ASC_ASC_CLC_DISR (1 << 0)
-
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_DMA (0xBF108000)
-/***********************************************************************/
-
-
-/***DMA RX Channel 0 Command Register***/
-#define INCA_IP_DMA_DMA_RXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0800))
-#define INCA_IP_DMA_DMA_RXCCR0_LBE (1 << 31)
-#define INCA_IP_DMA_DMA_RXCCR0_HPEN (1 << 30)
-#define INCA_IP_DMA_DMA_RXCCR0_INIT (1 << 2)
-#define INCA_IP_DMA_DMA_RXCCR0_OFF (1 << 1)
-#define INCA_IP_DMA_DMA_RXCCR0_HR (1 << 0)
-
-/***DMA RX Channel 1 Command Register***/
-#define INCA_IP_DMA_DMA_RXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0804))
-#define INCA_IP_DMA_DMA_RXCCR1_LBE (1 << 31)
-#define INCA_IP_DMA_DMA_RXCCR1_HPEN (1 << 30)
-#define INCA_IP_DMA_DMA_RXCCR1_INIT (1 << 2)
-#define INCA_IP_DMA_DMA_RXCCR1_OFF (1 << 1)
-#define INCA_IP_DMA_DMA_RXCCR1_HR (1 << 0)
-
-/***DMA Receive Interrupt Status Register***/
-#define INCA_IP_DMA_DMA_RXISR ((volatile u32*)(INCA_IP_DMA+ 0x0808))
-#define INCA_IP_DMA_DMA_RXISR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8)
-#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_DMA_DMA_RXISR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_DMA_DMA_RXISR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_DMA_DMA_RXISR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***DMA Receive Interrupt Mask Register***/
-#define INCA_IP_DMA_DMA_RXIMR ((volatile u32*)(INCA_IP_DMA+ 0x080C))
-#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8)
-#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define INCA_IP_DMA_DMA_RXIMR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_DMA_DMA_RXIMR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_DMA_DMA_RXIMR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***DMA First Receive Descriptor Addr. for Rx Channel 0
-***/
-#define INCA_IP_DMA_DMA_RXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x0810))
-#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***DMA First Receive Descriptor Addr. for Rx Channel 1
-***/
-#define INCA_IP_DMA_DMA_RXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x0814))
-#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***DMA Receive Channel Polling Time***/
-#define INCA_IP_DMA_DMA_RXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x0818))
-#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 30)
-#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 28)
-#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***DMA TX Channel 0 Command Register (Voice Port)***/
-#define INCA_IP_DMA_DMA_TXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0880))
-#define INCA_IP_DMA_DMA_TXCCR0_LBE (1 << 31)
-#define INCA_IP_DMA_DMA_TXCCR0_HPEN (1 << 30)
-#define INCA_IP_DMA_DMA_TXCCR0_HR (1 << 2)
-#define INCA_IP_DMA_DMA_TXCCR0_OFF (1 << 1)
-#define INCA_IP_DMA_DMA_TXCCR0_INIT (1 << 0)
-
-/***DMA TX Channel 1 Command Register (Mangmt Port)***/
-#define INCA_IP_DMA_DMA_TXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0884))
-#define INCA_IP_DMA_DMA_TXCCR1_LBE (1 << 31)
-#define INCA_IP_DMA_DMA_TXCCR1_HPEN (1 << 30)
-#define INCA_IP_DMA_DMA_TXCCR1_HR (1 << 2)
-#define INCA_IP_DMA_DMA_TXCCR1_OFF (1 << 1)
-#define INCA_IP_DMA_DMA_TXCCR1_INIT (1 << 0)
-
-/***DMA TX Channel 2 Command Register (SSC Port)***/
-#define INCA_IP_DMA_DMA_TXCCR2 ((volatile u32*)(INCA_IP_DMA+ 0x0888))
-#define INCA_IP_DMA_DMA_TXCCR2_LBE (1 << 31)
-#define INCA_IP_DMA_DMA_TXCCR2_HPEN (1 << 30)
-#define INCA_IP_DMA_DMA_TXCCR2_HBF (1 << 29)
-#define INCA_IP_DMA_DMA_TXCCR2_HR (1 << 2)
-#define INCA_IP_DMA_DMA_TXCCR2_OFF (1 << 1)
-#define INCA_IP_DMA_DMA_TXCCR2_INIT (1 << 0)
-
-/***DMA First Receive Descriptor Addr. for Tx Channel 0
-***/
-#define INCA_IP_DMA_DMA_TXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x08A0))
-#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***DMA First Receive Descriptor Addr. for Tx Channel 1
-***/
-#define INCA_IP_DMA_DMA_TXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x08A4))
-#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***DMA First Receive Descriptor Addr. for Tx Channel 2
-***/
-#define INCA_IP_DMA_DMA_TXFRDA2 ((volatile u32*)(INCA_IP_DMA+ 0x08A8))
-#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***DMA Transmit Channel Arbitration Register***/
-#define INCA_IP_DMA_DMA_TXWGT ((volatile u32*)(INCA_IP_DMA+ 0x08C0))
-#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***DMA Transmit Channel Polling Time***/
-#define INCA_IP_DMA_DMA_TXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x08C4))
-#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value) (((( 1 << 2) - 1) & (value)) << 30)
-#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 28)
-#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 26)
-#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***DMA Transmit Interrupt Status Register***/
-#define INCA_IP_DMA_DMA_TXISR ((volatile u32*)(INCA_IP_DMA+ 0x08C8))
-#define INCA_IP_DMA_DMA_TXISR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_DMA_DMA_TXISR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9)
-#define INCA_IP_DMA_DMA_TXISR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define INCA_IP_DMA_DMA_TXISR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***DMA Transmit Interrupt Mask Register***/
-#define INCA_IP_DMA_DMA_TXIMR ((volatile u32*)(INCA_IP_DMA+ 0x08CC))
-#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_DMA_DMA_TXIMR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9)
-#define INCA_IP_DMA_DMA_TXIMR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define INCA_IP_DMA_DMA_TXIMR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : Debug register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_Debug (0xBF106000)
-/***********************************************************************/
-
-
-/***MCD Break Bus Switch Register***/
-#define INCA_IP_Debug_MCD_BBS ((volatile u32*)(INCA_IP_Debug+ 0x0000))
-#define INCA_IP_Debug_MCD_BBS_BTP1 (1 << 19)
-#define INCA_IP_Debug_MCD_BBS_BTP0 (1 << 18)
-#define INCA_IP_Debug_MCD_BBS_BSP1 (1 << 17)
-#define INCA_IP_Debug_MCD_BBS_BSP0 (1 << 16)
-#define INCA_IP_Debug_MCD_BBS_BT5EN (1 << 15)
-#define INCA_IP_Debug_MCD_BBS_BT4EN (1 << 14)
-#define INCA_IP_Debug_MCD_BBS_BT5 (1 << 13)
-#define INCA_IP_Debug_MCD_BBS_BT4 (1 << 12)
-#define INCA_IP_Debug_MCD_BBS_BS5EN (1 << 7)
-#define INCA_IP_Debug_MCD_BBS_BS4EN (1 << 6)
-#define INCA_IP_Debug_MCD_BBS_BS5 (1 << 5)
-#define INCA_IP_Debug_MCD_BBS_BS4 (1 << 4)
-
-/***MCD Multiplexer Control Register***/
-#define INCA_IP_Debug_MCD_MCR ((volatile u32*)(INCA_IP_Debug+ 0x0008))
-#define INCA_IP_Debug_MCD_MCR_MUX5 (1 << 4)
-#define INCA_IP_Debug_MCD_MCR_MUX4 (1 << 3)
-#define INCA_IP_Debug_MCD_MCR_MUX1 (1 << 0)
-
-/***********************************************************************/
-/* Module : TSF register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_TSF (0xB8000900)
-/***********************************************************************/
-
-
-/***TSF Configuration Register (0000H)***/
-#define INCA_IP_TSF_TSF_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0000))
-#define INCA_IP_TSF_TSF_CONF_PWMEN (1 << 2)
-#define INCA_IP_TSF_TSF_CONF_LEDEN (1 << 1)
-#define INCA_IP_TSF_TSF_CONF_KEYEN (1 << 0)
-
-/***Key scan Configuration Register (0004H)***/
-#define INCA_IP_TSF_KEY_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0004))
-#define INCA_IP_TSF_KEY_CONF_SL (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Scan Register Line 0 and 1 (0008H)***/
-#define INCA_IP_TSF_SREG01 ((volatile u32*)(INCA_IP_TSF+ 0x0008))
-#define INCA_IP_TSF_SREG01_RES1x (value) (((( 1 << 12) - 1) & (value)) << 16)
-#define INCA_IP_TSF_SREG01_RES0x (value) (((( 1 << 13) - 1) & (value)) << 0)
-
-/***Scan Register Line 2 and 3 (000CH)***/
-#define INCA_IP_TSF_SREG23 ((volatile u32*)(INCA_IP_TSF+ 0x000C))
-#define INCA_IP_TSF_SREG23_RES3x (value) (((( 1 << 10) - 1) & (value)) << 16)
-#define INCA_IP_TSF_SREG23_RES2x (value) (((( 1 << 11) - 1) & (value)) << 0)
-
-/***Scan Register Line 4, 5 and 6 (0010H)***/
-#define INCA_IP_TSF_SREG456 ((volatile u32*)(INCA_IP_TSF+ 0x0010))
-#define INCA_IP_TSF_SREG456_RES6x (value) (((( 1 << 7) - 1) & (value)) << 24)
-#define INCA_IP_TSF_SREG456_RES5x (value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP_TSF_SREG456_RES4x (value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***Scan Register Line 7 to 12 (0014H)***/
-#define INCA_IP_TSF_SREG7to12 ((volatile u32*)(INCA_IP_TSF+ 0x0014))
-#define INCA_IP_TSF_SREG7to12_RES12x (1 << 28)
-#define INCA_IP_TSF_SREG7to12_RES11x (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define INCA_IP_TSF_SREG7to12_RES10x (value) (((( 1 << 3) - 1) & (value)) << 20)
-#define INCA_IP_TSF_SREG7to12_RES9x (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_TSF_SREG7to12_RES8x (value) (((( 1 << 5) - 1) & (value)) << 8)
-#define INCA_IP_TSF_SREG7to12_RES7x (value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***LEDMUX Configuration Register (0018H)***/
-#define INCA_IP_TSF_LEDMUX_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0018))
-#define INCA_IP_TSF_LEDMUX_CONF_ETL1 (1 << 25)
-#define INCA_IP_TSF_LEDMUX_CONF_ESTA1 (1 << 24)
-#define INCA_IP_TSF_LEDMUX_CONF_EDPX1 (1 << 23)
-#define INCA_IP_TSF_LEDMUX_CONF_EACT1 (1 << 22)
-#define INCA_IP_TSF_LEDMUX_CONF_ESPD1 (1 << 21)
-#define INCA_IP_TSF_LEDMUX_CONF_ETL0 (1 << 20)
-#define INCA_IP_TSF_LEDMUX_CONF_ESTA0 (1 << 19)
-#define INCA_IP_TSF_LEDMUX_CONF_EDPX0 (1 << 18)
-#define INCA_IP_TSF_LEDMUX_CONF_EACT0 (1 << 17)
-#define INCA_IP_TSF_LEDMUX_CONF_ESPD0 (1 << 16)
-#define INCA_IP_TSF_LEDMUX_CONF_INV (1 << 1)
-#define INCA_IP_TSF_LEDMUX_CONF_NCOL (1 << 0)
-
-/***LED Register (001CH)***/
-#define INCA_IP_TSF_LED_REG ((volatile u32*)(INCA_IP_TSF+ 0x001C))
-#define INCA_IP_TSF_LED_REG_Lxy (value) (((( 1 << 24) - 1) & (value)) << 0)
-
-/***Pulse Width Modulator 1 and 2 Register (0020H)***/
-#define INCA_IP_TSF_PWM12 ((volatile u32*)(INCA_IP_TSF+ 0x0020))
-#define INCA_IP_TSF_PWM12_PW2PW1 (value) (((( 1 << NaN) - 1) & (value)) << NaN)
-
-/***********************************************************************/
-/* Module : Ports register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_Ports (0xB8000A00)
-/***********************************************************************/
-
-
-/***Port 1 Data Output Register (0020H)***/
-#define INCA_IP_Ports_P1_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0020))
-#define INCA_IP_Ports_P1_OUT_P(value) (1 << value)
-
-
-/***Port 2 Data Output Register (0040H)***/
-#define INCA_IP_Ports_P2_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0040))
-#define INCA_IP_Ports_P2_OUT_P(value) (1 << value)
-
-
-/***Port 1 Data Input Register (0024H)***/
-#define INCA_IP_Ports_P1_IN ((volatile u32*)(INCA_IP_Ports+ 0x0024))
-#define INCA_IP_Ports_P1_IN_P(value) (1 << value)
-
-
-/***Port 2 Data Input Register (0044H)***/
-#define INCA_IP_Ports_P2_IN ((volatile u32*)(INCA_IP_Ports+ 0x0044))
-#define INCA_IP_Ports_P2_IN_P(value) (1 << value)
-
-
-/***Port 1 Direction Register (0028H)***/
-#define INCA_IP_Ports_P1_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0028))
-#define INCA_IP_Ports_P1_DIR_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P1_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***Port 2 Direction Register (0048H)***/
-#define INCA_IP_Ports_P2_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0048))
-#define INCA_IP_Ports_P2_DIR_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P2_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***Port 0 Alternate Function Select Register 0 (000C H)
-***/
-#define INCA_IP_Ports_P0_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x000C))
-#define INCA_IP_Ports_P0_ALTSEL_Port0P(value) (1 << value)
-
-
-/***Port 1 Alternate Function Select Register 0 (002C H)
-***/
-#define INCA_IP_Ports_P1_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x002C))
-#define INCA_IP_Ports_P1_ALTSEL_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P1_ALTSEL_Port2P(value) (1 << value)
-
-
-/***Port 2 Alternate Function Select Register 0 (004C H)
-***/
-#define INCA_IP_Ports_P2_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x004C))
-#define INCA_IP_Ports_P2_ALTSEL_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P2_ALTSEL_Port2P(value) (1 << value)
-
-
-/***Port 0 Input Schmitt-Trigger Off Register (0010 H)
-***/
-#define INCA_IP_Ports_P0_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0010))
-#define INCA_IP_Ports_P0_STOFF_Port0P(value) (1 << value)
-
-
-/***Port 1 Input Schmitt-Trigger Off Register (0030 H)
-***/
-#define INCA_IP_Ports_P1_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0030))
-#define INCA_IP_Ports_P1_STOFF_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P1_STOFF_Port2P(value) (1 << value)
-
-
-/***Port 2 Input Schmitt-Trigger Off Register (0050 H)
-***/
-#define INCA_IP_Ports_P2_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0050))
-#define INCA_IP_Ports_P2_STOFF_Port1P(value) (1 << value)
-
-#define INCA_IP_Ports_P2_STOFF_Port2P(value) (1 << value)
-
-
-/***Port 2 Open Drain Control Register (0054H)***/
-#define INCA_IP_Ports_P2_OD ((volatile u32*)(INCA_IP_Ports+ 0x0054))
-#define INCA_IP_Ports_P2_OD_Port2P(value) (1 << value)
-
-
-/***Port 0 Pull Up Device Enable Register (0018 H)***/
-#define INCA_IP_Ports_P0_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0018))
-#define INCA_IP_Ports_P0_PUDEN_Port0P(value) (1 << value)
-
-
-/***Port 2 Pull Up Device Enable Register (0058 H)***/
-#define INCA_IP_Ports_P2_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0058))
-#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value)
-
-#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value)
-
-
-/***Port 0 Pull Up/Pull Down Select Register (001C H)***/
-#define INCA_IP_Ports_P0_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x001C))
-#define INCA_IP_Ports_P0_PUDSEL_Port0P(value) (1 << value)
-
-
-/***Port 2 Pull Up/Pull Down Select Register (005C H)***/
-#define INCA_IP_Ports_P2_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x005C))
-#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value)
-
-#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value)
-
-
-/***********************************************************************/
-/* Module : DES/3DES register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_DES_3DES (0xB8000800)
-/***********************************************************************/
-
-
-/***DES Input Data High Register***/
-#define INCA_IP_DES_3DES_DES_IHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000))
-#define INCA_IP_DES_3DES_DES_IHR_IH(value) (1 << value)
-
-
-/***DES Input Data Low Register***/
-#define INCA_IP_DES_3DES_DES_ILR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004))
-#define INCA_IP_DES_3DES_DES_ILR_IL(value) (1 << value)
-
-
-/***DES Key #1 High Register***/
-#define INCA_IP_DES_3DES_DES_K1HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008))
-#define INCA_IP_DES_3DES_DES_K1HR_K1H(value) (1 << value)
-
-
-/***DES Key #1 Low Register***/
-#define INCA_IP_DES_3DES_DES_K1LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C))
-#define INCA_IP_DES_3DES_DES_K1LR_K1L(value) (1 << value)
-
-
-/***DES Key #2 High Register***/
-#define INCA_IP_DES_3DES_DES_K2HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010))
-#define INCA_IP_DES_3DES_DES_K2HR_K2H(value) (1 << value)
-
-
-/***DES Key #2 Low Register***/
-#define INCA_IP_DES_3DES_DES_K2LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014))
-#define INCA_IP_DES_3DES_DES_K2LR_K2L(value) (1 << value)
-
-
-/***DES Key #3 High Register***/
-#define INCA_IP_DES_3DES_DES_K3HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018))
-#define INCA_IP_DES_3DES_DES_K3HR_K3H(value) (1 << value)
-
-
-/***DES Key #3 Low Register***/
-#define INCA_IP_DES_3DES_DES_K3LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C))
-#define INCA_IP_DES_3DES_DES_K3LR_K3L(value) (1 << value)
-
-
-/***DES Initialization Vector High Register***/
-#define INCA_IP_DES_3DES_DES_IVHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020))
-#define INCA_IP_DES_3DES_DES_IVHR_IVH(value) (1 << value)
-
-
-/***DES Initialization Vector Low Register***/
-#define INCA_IP_DES_3DES_DES_IVLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024))
-#define INCA_IP_DES_3DES_DES_IVLR_IVL(value) (1 << value)
-
-
-/***DES Control Register***/
-#define INCA_IP_DES_3DES_DES_CONTROLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028))
-#define INCA_IP_DES_3DES_DES_CONTROLR_KRE (1 << 31)
-#define INCA_IP_DES_3DES_DES_CONTROLR_DAU (1 << 16)
-#define INCA_IP_DES_3DES_DES_CONTROLR_F(value) (1 << value)
-
-#define INCA_IP_DES_3DES_DES_CONTROLR_O(value) (1 << value)
-
-#define INCA_IP_DES_3DES_DES_CONTROLR_GO (1 << 8)
-#define INCA_IP_DES_3DES_DES_CONTROLR_STP (1 << 7)
-#define INCA_IP_DES_3DES_DES_CONTROLR_IEN (1 << 6)
-#define INCA_IP_DES_3DES_DES_CONTROLR_BUS (1 << 5)
-#define INCA_IP_DES_3DES_DES_CONTROLR_SM (1 << 4)
-#define INCA_IP_DES_3DES_DES_CONTROLR_E_D (1 << 3)
-#define INCA_IP_DES_3DES_DES_CONTROLR_M(value) (1 << value)
-
-
-/***DES Output Data High Register***/
-#define INCA_IP_DES_3DES_DES_OHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C))
-#define INCA_IP_DES_3DES_DES_OHR_OH(value) (1 << value)
-
-
-/***DES Output Data Low Register***/
-#define INCA_IP_DES_3DES_DES_OLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030))
-#define INCA_IP_DES_3DES_DES_OLR_OL(value) (1 << value)
-
-
-/***********************************************************************/
-/* Module : AES register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_AES (0xB8000880)
-/***********************************************************************/
-
-
-/***AES Input Data 3 Register***/
-#define INCA_IP_AES_AES_ID3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_ID3R_I(value) (1 << value)
-
-
-/***AES Input Data 2 Register***/
-#define INCA_IP_AES_AES_ID2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_ID2R_I(value) (1 << value)
-
-
-/***AES Input Data 1 Register***/
-#define INCA_IP_AES_AES_ID1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_ID1R_I(value) (1 << value)
-
-
-/***AES Input Data 0 Register***/
-#define INCA_IP_AES_AES_ID0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_ID0R_I(value) (1 << value)
-
-
-/***AES Output Data 3 Register***/
-#define INCA_IP_AES_AES_OD3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_OD3R_O(value) (1 << value)
-
-
-/***AES Output Data 2 Register***/
-#define INCA_IP_AES_AES_OD2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_OD2R_O(value) (1 << value)
-
-
-/***AES Output Data 1 Register***/
-#define INCA_IP_AES_AES_OD1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_OD1R_O(value) (1 << value)
-
-
-/***AES Output Data 0 Register***/
-#define INCA_IP_AES_AES_OD0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_OD0R_O(value) (1 << value)
-
-
-/***AES Key 7 Register***/
-#define INCA_IP_AES_AES_K7R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K7R_K(value) (1 << value)
-
-
-/***AES Key 6 Register***/
-#define INCA_IP_AES_AES_K6R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K6R_K(value) (1 << value)
-
-
-/***AES Key 5 Register***/
-#define INCA_IP_AES_AES_K5R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K5R_K(value) (1 << value)
-
-
-/***AES Key 4 Register***/
-#define INCA_IP_AES_AES_K4R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K4R_K(value) (1 << value)
-
-
-/***AES Key 3 Register***/
-#define INCA_IP_AES_AES_K3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K3R_K(value) (1 << value)
-
-
-/***AES Key 2 Register***/
-#define INCA_IP_AES_AES_K2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K2R_K(value) (1 << value)
-
-
-/***AES Key 1 Register***/
-#define INCA_IP_AES_AES_K1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K1R_K(value) (1 << value)
-
-
-/***AES Key 0 Register***/
-#define INCA_IP_AES_AES_K0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_K0R_K(value) (1 << value)
-
-
-/***AES Initialization Vector 3 Register***/
-#define INCA_IP_AES_AES_IV3R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_IV3R_IV(value) (1 << value)
-
-
-/***AES Initialization Vector 2 Register***/
-#define INCA_IP_AES_AES_IV2R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_IV2R_IV(value) (1 << value)
-
-
-/***AES Initialization Vector 1 Register***/
-#define INCA_IP_AES_AES_IV1R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_IV1R_IV(value) (1 << value)
-
-
-/***AES Initialization Vector 0 Register***/
-#define INCA_IP_AES_AES_IV0R ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_IV0R_IV (value) (((( 1 << 32) - 1) &(value)) << 0)
-
-/***AES Control Register***/
-#define INCA_IP_AES_AES_CONTROLR ((volatile u32*)(INCA_IP_AES+ 0x0000))
-#define INCA_IP_AES_AES_CONTROLR_KRE (1 << 31)
-#define INCA_IP_AES_AES_CONTROLR_DAU (1 << 16)
-#define INCA_IP_AES_AES_CONTROLR_PNK (1 << 15)
-#define INCA_IP_AES_AES_CONTROLR_F(value) (1 << value)
-
-#define INCA_IP_AES_AES_CONTROLR_O(value) (1 << value)
-
-#define INCA_IP_AES_AES_CONTROLR_GO (1 << 8)
-#define INCA_IP_AES_AES_CONTROLR_STP (1 << 7)
-#define INCA_IP_AES_AES_CONTROLR_IEN (1 << 6)
-#define INCA_IP_AES_AES_CONTROLR_BUS (1 << 5)
-#define INCA_IP_AES_AES_CONTROLR_SM (1 << 4)
-#define INCA_IP_AES_AES_CONTROLR_E_D (1 << 3)
-#define INCA_IP_AES_AES_CONTROLR_KV (1 << 2)
-#define INCA_IP_AES_AES_CONTROLR_K(value) (1 << value)
-
-
-/***********************************************************************/
-/* Module : I²C register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_IIC (0xB8000700)
-/***********************************************************************/
-
-
-/***I²C Port Input Select Register***/
-#define INCA_IP_IIC_IIC_PISEL ((volatile u32*)(INCA_IP_IIC+ 0x0004))
-#define INCA_IP_IIC_IIC_PISEL_SDAIS(value) (1 << value)
-
-#define INCA_IP_IIC_IIC_PISEL_SCLIS(value) (1 << value)
-
-
-/***I²C Clock Control Register***/
-#define INCA_IP_IIC_IIC_CLC ((volatile u32*)(INCA_IP_IIC+ 0x0000))
-#define INCA_IP_IIC_IIC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_CLC_DISS (1 << 1)
-#define INCA_IP_IIC_IIC_CLC_DISR (1 << 0)
-
-/***I²C System Control Register***/
-#define INCA_IP_IIC_IIC_SYSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
-#define INCA_IP_IIC_IIC_SYSCON_0_WMEN (1 << 31)
-#define INCA_IP_IIC_IIC_SYSCON_0_CI (value) (((( 1 << 2) - 1) & (value)) << 26)
-#define INCA_IP_IIC_IIC_SYSCON_0_STP (1 << 25)
-#define INCA_IP_IIC_IIC_SYSCON_0_IGE (1 << 24)
-#define INCA_IP_IIC_IIC_SYSCON_0_TRX (1 << 23)
-#define INCA_IP_IIC_IIC_SYSCON_0_INT (1 << 22)
-#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS (1 << 21)
-#define INCA_IP_IIC_IIC_SYSCON_0_BUM (1 << 20)
-#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
-#define INCA_IP_IIC_IIC_SYSCON_0_RSC (1 << 17)
-#define INCA_IP_IIC_IIC_SYSCON_0_M10 (1 << 16)
-#define INCA_IP_IIC_IIC_SYSCON_0_RMEN (1 << 15)
-#define INCA_IP_IIC_IIC_SYSCON_0_CO (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_SYSCON_0_IRQE (1 << 7)
-#define INCA_IP_IIC_IIC_SYSCON_0_IRQP (1 << 6)
-#define INCA_IP_IIC_IIC_SYSCON_0_IRQD (1 << 5)
-#define INCA_IP_IIC_IIC_SYSCON_0_BB (1 << 4)
-#define INCA_IP_IIC_IIC_SYSCON_0_LRB (1 << 3)
-#define INCA_IP_IIC_IIC_SYSCON_0_SLA (1 << 2)
-#define INCA_IP_IIC_IIC_SYSCON_0_AL (1 << 1)
-#define INCA_IP_IIC_IIC_SYSCON_0_ADR (1 << 0)
-
-/***I²C System Control Register***/
-#define INCA_IP_IIC_IIC_SYSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
-#define INCA_IP_IIC_IIC_SYSCON_1_RM (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define INCA_IP_IIC_IIC_SYSCON_1_TRX (1 << 23)
-#define INCA_IP_IIC_IIC_SYSCON_1_INT (1 << 22)
-#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS (1 << 21)
-#define INCA_IP_IIC_IIC_SYSCON_1_BUM (1 << 20)
-#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
-#define INCA_IP_IIC_IIC_SYSCON_1_RSC (1 << 17)
-#define INCA_IP_IIC_IIC_SYSCON_1_M10 (1 << 16)
-#define INCA_IP_IIC_IIC_SYSCON_1_RMEN (1 << 15)
-#define INCA_IP_IIC_IIC_SYSCON_1_CO (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_SYSCON_1_IRQE (1 << 7)
-#define INCA_IP_IIC_IIC_SYSCON_1_IRQP (1 << 6)
-#define INCA_IP_IIC_IIC_SYSCON_1_IRQD (1 << 5)
-#define INCA_IP_IIC_IIC_SYSCON_1_BB (1 << 4)
-#define INCA_IP_IIC_IIC_SYSCON_1_LRB (1 << 3)
-#define INCA_IP_IIC_IIC_SYSCON_1_SLA (1 << 2)
-#define INCA_IP_IIC_IIC_SYSCON_1_AL (1 << 1)
-#define INCA_IP_IIC_IIC_SYSCON_1_ADR (1 << 0)
-
-/***I²C System Control Register***/
-#define INCA_IP_IIC_IIC_SYSCON_2 ((volatile u32*)(INCA_IP_IIC+ 0x0010))
-#define INCA_IP_IIC_IIC_SYSCON_2_WMEN (1 << 31)
-#define INCA_IP_IIC_IIC_SYSCON_2_CI (value) (((( 1 << 2) - 1) & (value)) << 26)
-#define INCA_IP_IIC_IIC_SYSCON_2_STP (1 << 25)
-#define INCA_IP_IIC_IIC_SYSCON_2_IGE (1 << 24)
-#define INCA_IP_IIC_IIC_SYSCON_2_TRX (1 << 23)
-#define INCA_IP_IIC_IIC_SYSCON_2_INT (1 << 22)
-#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS (1 << 21)
-#define INCA_IP_IIC_IIC_SYSCON_2_BUM (1 << 20)
-#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value) (((( 1 << 2) - 1) & (value)) << 18)
-#define INCA_IP_IIC_IIC_SYSCON_2_RSC (1 << 17)
-#define INCA_IP_IIC_IIC_SYSCON_2_M10 (1 << 16)
-#define INCA_IP_IIC_IIC_SYSCON_2_WM (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_SYSCON_2_IRQE (1 << 7)
-#define INCA_IP_IIC_IIC_SYSCON_2_IRQP (1 << 6)
-#define INCA_IP_IIC_IIC_SYSCON_2_IRQD (1 << 5)
-#define INCA_IP_IIC_IIC_SYSCON_2_BB (1 << 4)
-#define INCA_IP_IIC_IIC_SYSCON_2_LRB (1 << 3)
-#define INCA_IP_IIC_IIC_SYSCON_2_SLA (1 << 2)
-#define INCA_IP_IIC_IIC_SYSCON_2_AL (1 << 1)
-#define INCA_IP_IIC_IIC_SYSCON_2_ADR (1 << 0)
-
-/***I²C Write Hardware Modified System Control Register
-***/
-#define INCA_IP_IIC_IIC_WHBSYSCON ((volatile u32*)(INCA_IP_IIC+ 0x0020))
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN (1 << 31)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN (1 << 30)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP (1 << 26)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP (1 << 25)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX (1 << 24)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX (1 << 23)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS (1 << 22)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS (1 << 21)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM (1 << 20)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM (1 << 19)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC (1 << 17)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC (1 << 16)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN (1 << 15)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN (1 << 14)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE (1 << 10)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP (1 << 9)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD (1 << 8)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE (1 << 7)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP (1 << 6)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD (1 << 5)
-#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL (1 << 2)
-#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL (1 << 1)
-
-/***I²C Bus Control Register***/
-#define INCA_IP_IIC_IIC_BUSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
-#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD (1 << 31)
-#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value) (((( 1 << 10) - 1) & (value)) << 16)
-#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value) (1 << value)
-
-#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value) (1 << value)
-
-
-/***I²C Bus Control Register***/
-#define INCA_IP_IIC_IIC_BUSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0014))
-#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD (1 << 31)
-#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value) (((( 1 << 7) - 1) & (value)) << 17)
-#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value) (1 << value)
-
-#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value) (1 << value)
-
-
-/***I²C Receive Transmit Buffer***/
-#define INCA_IP_IIC_IIC_RTB ((volatile u32*)(INCA_IP_IIC+ 0x0018))
-#define INCA_IP_IIC_IIC_RTB_RTB(value) (1 << value)
-
-
-/***********************************************************************/
-/* Module : FB register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_FB (0xBF880000)
-/***********************************************************************/
-
-
-/***FB Access Error Cause Register***/
-#define INCA_IP_FB_FB_ERRCAUSE ((volatile u32*)(INCA_IP_FB+ 0x0100))
-#define INCA_IP_FB_FB_ERRCAUSE_ERR (1 << 31)
-#define INCA_IP_FB_FB_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***FB Access Error Address Register***/
-#define INCA_IP_FB_FB_ERRADDR ((volatile u32*)(INCA_IP_FB+ 0x0108))
-#define INCA_IP_FB_FB_ERRADDR_ADDR
-
-/***FB Configuration Register***/
-#define INCA_IP_FB_FB_CFG ((volatile u32*)(INCA_IP_FB+ 0x0800))
-#define INCA_IP_FB_FB_CFG_SVM (1 << 0)
-
-/***********************************************************************/
-/* Module : SRAM register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_SRAM (0xBF980000)
-/***********************************************************************/
-
-
-/***SRAM Size Register***/
-#define INCA_IP_SRAM_SRAM_SIZE ((volatile u32*)(INCA_IP_SRAM+ 0x0800))
-#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : BIU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_BIU (0xBFA80000)
-/***********************************************************************/
-
-
-/***BIU Identification Register***/
-#define INCA_IP_BIU_BIU_ID ((volatile u32*)(INCA_IP_BIU+ 0x0000))
-#define INCA_IP_BIU_BIU_ID_ARCH (1 << 16)
-#define INCA_IP_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define INCA_IP_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***BIU Access Error Cause Register***/
-#define INCA_IP_BIU_BIU_ERRCAUSE ((volatile u32*)(INCA_IP_BIU+ 0x0100))
-#define INCA_IP_BIU_BIU_ERRCAUSE_ERR (1 << 31)
-#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***BIU Access Error Address Register***/
-#define INCA_IP_BIU_BIU_ERRADDR ((volatile u32*)(INCA_IP_BIU+ 0x0108))
-#define INCA_IP_BIU_BIU_ERRADDR_ADDR
-
-/***********************************************************************/
-/* Module : ICU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP_ICU (0xBF101000)
-/***********************************************************************/
-
-
-/***IM0 Interrupt Status Register***/
-#define INCA_IP_ICU_IM0_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0000))
-#define INCA_IP_ICU_IM0_ISR_IR(value) (1 << value)
-
-
-/***IM1 Interrupt Status Register***/
-#define INCA_IP_ICU_IM1_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0200))
-#define INCA_IP_ICU_IM1_ISR_IR(value) (1 << value)
-
-
-/***IM2 Interrupt Status Register***/
-#define INCA_IP_ICU_IM2_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0400))
-#define INCA_IP_ICU_IM2_ISR_IR(value) (1 << value)
-
-
-/***IM0 Interrupt Enable Register***/
-#define INCA_IP_ICU_IM0_IER ((volatile u32*)(INCA_IP_ICU+ 0x0008))
-#define INCA_IP_ICU_IM0_IER_IR(value) (1 << value)
-
-
-/***IM1 Interrupt Enable Register***/
-#define INCA_IP_ICU_IM1_IER ((volatile u32*)(INCA_IP_ICU+ 0x0208))
-#define INCA_IP_ICU_IM1_IER_IR(value) (1 << value)
-
-
-/***IM2 Interrupt Enable Register***/
-#define INCA_IP_ICU_IM2_IER ((volatile u32*)(INCA_IP_ICU+ 0x0408))
-#define INCA_IP_ICU_IM2_IER_IR(value) (1 << value)
-
-
-/***IM0 Interrupt Output Status Register***/
-#define INCA_IP_ICU_IM0_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0010))
-#define INCA_IP_ICU_IM0_IOSR_IR(value) (1 << value)
-
-
-/***IM1 Interrupt Output Status Register***/
-#define INCA_IP_ICU_IM1_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0210))
-#define INCA_IP_ICU_IM1_IOSR_IR(value) (1 << value)
-
-
-/***IM2 Interrupt Output Status Register***/
-#define INCA_IP_ICU_IM2_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0410))
-#define INCA_IP_ICU_IM2_IOSR_IR(value) (1 << value)
-
-
-/***IM0 Interrupt Request Set Register***/
-#define INCA_IP_ICU_IM0_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0018))
-#define INCA_IP_ICU_IM0_IRSR_IR(value) (1 << value)
-
-
-/***IM1 Interrupt Request Set Register***/
-#define INCA_IP_ICU_IM1_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0218))
-#define INCA_IP_ICU_IM1_IRSR_IR(value) (1 << value)
-
-
-/***IM2 Interrupt Request Set Register***/
-#define INCA_IP_ICU_IM2_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0418))
-#define INCA_IP_ICU_IM2_IRSR_IR(value) (1 << value)
-
-
-/***External Interrupt Control Register***/
-#define INCA_IP_ICU_ICU_EICR ((volatile u32*)(INCA_IP_ICU+ 0x0B00))
-#define INCA_IP_ICU_ICU_EICR_EII5 (value) (((( 1 << 3) - 1) & (value)) << 20)
-#define INCA_IP_ICU_ICU_EICR_EII4 (value) (((( 1 << 3) - 1) & (value)) << 16)
-#define INCA_IP_ICU_ICU_EICR_EII3 (value) (((( 1 << 3) - 1) & (value)) << 12)
-#define INCA_IP_ICU_ICU_EICR_EII2 (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define INCA_IP_ICU_ICU_EICR_EII1 (value) (((( 1 << 3) - 1) & (value)) << 4)
-#define INCA_IP_ICU_ICU_EICR_EII0 (value) (((( 1 << 3) - 1) & (value)) << 0)
diff --git a/arch/mips/include/asm/u-boot-mips.h b/arch/mips/include/asm/u-boot-mips.h
index 9f3cce9a62..a5b2fc08f8 100644
--- a/arch/mips/include/asm/u-boot-mips.h
+++ b/arch/mips/include/asm/u-boot-mips.h
@@ -21,5 +21,3 @@ static inline unsigned long image_copy_end(void)
extern char __image_copy_end[];
return (unsigned long) &__image_copy_end;
}
-
-extern int incaip_set_cpuclk(void);
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index 317c8258de..3200d87e30 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -103,9 +103,6 @@ init_fnc_t *init_sequence[] = {
board_early_init_f,
timer_init,
env_init, /* initialize environment */
-#ifdef CONFIG_INCA_IP
- incaip_set_cpuclk, /* set cpu clock according to env. variable */
-#endif
init_baudrate, /* initialize baudrate settings */
serial_init, /* serial communications setup */
console_init_f,
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
deleted file mode 100644
index 602d30ecee..0000000000
--- a/board/incaip/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = incaip.o flash.o
-obj-y += lowlevel_init.o
diff --git a/board/incaip/README b/board/incaip/README
deleted file mode 100644
index 132915292e..0000000000
--- a/board/incaip/README
+++ /dev/null
@@ -1,57 +0,0 @@
-
-Flash programming on the INCA-IP board is complicated because of the
-EBU swapping unit. A BDI2000 can be used for flash programming only
-if the EBU swapping unit is enabled; otherwise it will not detect the
-flash memory. But the EBU swapping unit is disadbled after reset, so
-if you program some code to flash with the swapping unit on, it will
-not be runnable with the swapping unit off.
-
-The consequence is that you have to write a pre-swapped image to
-flash using the BDI2000. A simple host-side tool "inca-swap-bytes" is
-provided in the "tools/" directory. Use it as follows:
-
- bash$ ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
-
-Note that the current BDI config file _disables_ the EBU swapping
-unit for the flash bank 0. To enable it, (this is required for the
-BDI flash commands to work) uncomment the following line in the
-config file:
-
- ;WM32 0xb8000260 0x404161ff ; Swapping unit enabled
-
-and comment out
-
- WM32 0xb8000260 0x004161ff ; Swapping unit disabled
-
-Alternatively, you can use "mm 0xb8000260 <value>" commands to
-enable/disable the swapping unit manually.
-
-Just for reference, here is the complete sequence of actions we took
-to install a U-Boot image into flash.
-
- 1. ./inca-swap-bytes <u-boot.bin >u-boot.bin.swp
-
- 2. From BDI:
-
- mm 0xb8000260 0x404161ff
- erase 0xb0000000
- erase 0xb0010000
- prog 0xb0000000 /tftpboot/INCA/u-boot.bin.swp bin
- mm 0xb8000260 0x004161ff
- go 0xb0000000
-
-
-Ethernet autonegotiation needs some time to complete. Instead of
-delaying the boot process in all cases, we just start the
-autonegotiation process when U-Boot comes up and that is all. Most
-likely, it will complete by the time the network transfer is
-attempted for the first time. In the worst case, if a transfer is
-attempted before the autonegotiation is complete, just a single
-packet would be lost resulting in a single timeout error, and then
-the transfer would proceed normally. So the time that we would have
-lost unconditionally waiting for the autonegotiation to complete, we
-have to wait only if the file transfer is started immediately after
-reset. We've verified that this works for all the clock
-configurations.
-
-(C) 2003 Wolfgang Denk
diff --git a/board/incaip/config.mk b/board/incaip/config.mk
deleted file mode 100644
index e854f8e655..0000000000
--- a/board/incaip/config.mk
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#
-# INCA-IP board with MIPS 4Kc CPU core
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xB0000000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80100000
diff --git a/board/incaip/flash.c b/board/incaip/flash.c
deleted file mode 100644
index a786ac9327..0000000000
--- a/board/incaip/flash.c
+++ /dev/null
@@ -1,655 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/inca-ip.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-#if 0
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02aa
-#else
-#define FLASH_CYCLE1 0x0554
-#define FLASH_CYCLE2 0x02ab
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2;
- ulong * buscon = (ulong *)
- ((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2);
-
- /* Disable write protection */
- *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS;
-
-#if 1
- memset(&flash_info[i], 0, sizeof(flash_info_t));
-#endif
-
- flash_info[i].size =
- flash_get_size((FPW *)flashbase, &flash_info[i]);
-
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
- i, flash_info[i].size);
- }
-
- size += flash_info[i].size;
- }
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- FPWV *base = (FPWV *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW)0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW)0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- }
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set up sector start address table (uniform sector type) */
- for( i = 0; i < info->sector_count; i++ )
- info->start[i] = base + (i * sect_size);
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->start[0] <= base && base < info->start[0] + info->size)
- break;
- }
-
- return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- char *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- }
- else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf (fmt, bootletter, boottype);
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- switch (addr[1] & 0xff) {
-
- case (uchar)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar)INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
-
- case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- case (FPW)INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof(FPW)/2);
- break; /* => 1 or 2 MB */
-
- case (FPW)INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof(FPW)/2);
- break; /* => 1 or 2 MB */
-
- case (FPW)INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof(FPW)/2);
- break; /* => 2 or 4 MB */
-
- case (FPW)INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof(FPW)/2);
- break; /* => 2 or 4 MB */
-
- case (FPW)INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break; /* => 4 or 8 MB */
-
- case (FPW)INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break; /* => 4 or 8 MB */
-
- case (FPW)INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- case (FPW)INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets((ulong)addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_AM640U:
- break;
- case FLASH_UNKNOWN:
- default:
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- last = get_timer(0);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr = (FPWV *)(info->start[sect]);
- if (intel) {
- *addr = (FPW)0x00500050; /* clear status register */
- *addr = (FPW)0x00200020; /* erase setup */
- *addr = (FPW)0x00D000D0; /* erase confirm */
- }
- else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *)(info->start[0]);
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- *addr = (FPW)0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay (1000);
-
- while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW)0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */
- putc ('.');
- last = get_timer(0);
- }
- }
-
- /* show that we're waiting */
- if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */
- putc ('.');
- last = get_timer(0);
- }
-
- flash_reset(info); /* reset to read mode */
- }
-
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof(data), left -= sizeof(data) - bytes) {
-
- bytes = addr & (sizeof(data) - 1);
- addr &= ~(sizeof(data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof(data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left )
- data += *((uchar *)addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd(info, (FPWV *)addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel(info, (FPWV *)addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf ("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
-
- base = (FPWV *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00F000F0; /* reset bank */
- res = 1;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *dest = (FPW)0x00500050; /* clear status register */
- *dest = (FPW)0x00FF00FF; /* make sure in read mode */
- *dest = (FPW)0x00400040; /* program setup */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW)0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW)0x00500050; /* clear status register */
- *dest = (FPW)0x00FF00FF; /* make sure in read mode */
-
- return (res);
-}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
deleted file mode 100644
index 217b8afa34..0000000000
--- a/board/incaip/incaip.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/addrspace.h>
-#include <asm/inca-ip.h>
-#include <asm/io.h>
-#include <asm/reboot.h>
-
-extern uint incaip_get_cpuclk(void);
-
-void _machine_restart(void)
-{
- *INCA_IP_WDT_RST_REQ = 0x3f;
-}
-
-static ulong max_sdram_size(void)
-{
- /* The only supported SDRAM data width is 16bit.
- */
-#define CONFIG_SYS_DW 2
-
- /* The only supported number of SDRAM banks is 4.
- */
-#define CONFIG_SYS_NB 4
-
- ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0;
- int cols = cfgpb0 & 0xF;
- int rows = (cfgpb0 & 0xF0) >> 4;
- ulong size = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB;
-
- return size;
-}
-
-phys_size_t initdram(int board_type)
-{
- int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0;
- ulong size, max_size = 0;
- ulong our_address;
-
- asm volatile ("move %0, $25" : "=r" (our_address) :);
-
- /* Can't probe for RAM size unless we are running from Flash.
- */
- if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
- {
- return max_sdram_size();
- }
-
- for (cols = 0x8; cols <= 0xC; cols++)
- {
- for (rows = 0xB; rows <= 0xD; rows++)
- {
- *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
- (rows << 4) | cols;
- size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
- max_sdram_size());
-
- if (size > max_size)
- {
- best_val = *INCA_IP_SDRAM_MC_CFGPB0;
- max_size = size;
- }
- }
- }
-
- *INCA_IP_SDRAM_MC_CFGPB0 = best_val;
- return max_size;
-}
-
-int checkboard (void)
-{
- unsigned long chipid = *INCA_IP_WDT_CHIPID;
- int part_num;
-
- puts ("Board: INCA-IP ");
- part_num = (chipid >> 12) & 0xffff;
- switch (part_num) {
- case 0xc0:
- printf ("Standard Version, ");
- break;
- case 0xc1:
- printf ("Basic Version, ");
- break;
- default:
- printf ("Unknown Part Number 0x%x ", part_num);
- break;
- }
-
- printf ("Chip V1.%ld, ", (chipid >> 28));
-
- printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000);
-
- set_io_port_base(0);
-
- return 0;
-}
-
-#if defined(CONFIG_INCA_IP_SWITCH)
-int board_eth_init(bd_t *bis)
-{
- return inca_switch_initialize(bis);
-}
-#endif
diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S
deleted file mode 100644
index b6cf6a9960..0000000000
--- a/board/incaip/lowlevel_init.S
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Memory sub-system initialization code for INCA-IP development board.
- *
- * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <asm/regdef.h>
-
-
-#define EBU_MODUL_BASE 0xB8000200
-#define EBU_CLC(value) 0x0000(value)
-#define EBU_CON(value) 0x0010(value)
-#define EBU_ADDSEL0(value) 0x0020(value)
-#define EBU_ADDSEL1(value) 0x0024(value)
-#define EBU_ADDSEL2(value) 0x0028(value)
-#define EBU_BUSCON0(value) 0x0060(value)
-#define EBU_BUSCON1(value) 0x0064(value)
-#define EBU_BUSCON2(value) 0x0068(value)
-
-#define MC_MODUL_BASE 0xBF800000
-#define MC_ERRCAUSE(value) 0x0100(value)
-#define MC_ERRADDR(value) 0x0108(value)
-#define MC_IOGP(value) 0x0800(value)
-#define MC_SELFRFSH(value) 0x0A00(value)
-#define MC_CTRLENA(value) 0x1000(value)
-#define MC_MRSCODE(value) 0x1008(value)
-#define MC_CFGDW(value) 0x1010(value)
-#define MC_CFGPB0(value) 0x1018(value)
-#define MC_LATENCY(value) 0x1038(value)
-#define MC_TREFRESH(value) 0x1040(value)
-
-#define CGU_MODUL_BASE 0xBF107000
-#define CGU_PLL1CR(value) 0x0008(value)
-#define CGU_DIVCR(value) 0x0010(value)
-#define CGU_MUXCR(value) 0x0014(value)
-#define CGU_PLL1SR(value) 0x000C(value)
-
- .set noreorder
-
-
-/*
- * void ebu_init(long)
- *
- * a0 has the clock value we are going to run at
- */
- .globl ebu_init
- .ent ebu_init
-ebu_init:
-__ebu_init:
-
- li t1, EBU_MODUL_BASE
- li t2, 0xA0000041
- sw t2, EBU_ADDSEL0(t1)
- li t2, 0xA0800041
- sw t2, EBU_ADDSEL2(t1)
- li t2, 0xBE0000F1
- sw t2, EBU_ADDSEL1(t1)
-
- li t3, 100000000
- beq a0, t3, 1f
- nop
- li t3, 133000000
- beq a0, t3, 2f
- nop
- li t3, 150000000
- beq a0, t3, 2f
- nop
- b 3f
- nop
-
- /* 100 MHz */
-1:
- li t2, 0x8841417D
- sw t2, EBU_BUSCON0(t1)
- sw t2, EBU_BUSCON2(t1)
- li t2, 0x684142BD
- b 3f
- sw t2, EBU_BUSCON1(t1) /* delay slot */
-
- /* 133 or 150 MHz */
-2:
- li t2, 0x8841417E
- sw t2, EBU_BUSCON0(t1)
- sw t2, EBU_BUSCON2(t1)
- li t2, 0x684143FD
- sw t2, EBU_BUSCON1(t1)
-3:
- jr ra
- nop
-
- .end ebu_init
-
-
-/*
- * void cgu_init(long)
- *
- * a0 has the clock value
- */
- .globl cgu_init
- .ent cgu_init
-cgu_init:
-__cgu_init:
-
- li t1, CGU_MODUL_BASE
-
- li t3, 100000000
- beq a0, t3, 1f
- nop
- li t3, 133000000
- beq a0, t3, 2f
- nop
- li t3, 150000000
- beq a0, t3, 3f
- nop
- b 5f
- nop
-
- /* 100 MHz clock */
-1:
- li t2, 0x80000014
- sw t2, CGU_DIVCR(t1)
- li t2, 0x80000000
- sw t2, CGU_MUXCR(t1)
- li t2, 0x800B0001
- b 5f
- sw t2, CGU_PLL1CR(t1) /* delay slot */
-
- /* 133 MHz clock */
-2:
- li t2, 0x80000054
- sw t2, CGU_DIVCR(t1)
- li t2, 0x80000000
- sw t2, CGU_MUXCR(t1)
- li t2, 0x800B0001
- b 5f
- sw t2, CGU_PLL1CR(t1) /* delay slot */
-
- /* 150 MHz clock */
-3:
- li t2, 0x80000017
- sw t2, CGU_DIVCR(t1)
- li t2, 0xC00B0001
- sw t2, CGU_PLL1CR(t1)
- li t3, 0x80000000
-4:
- lw t2, CGU_PLL1SR(t1)
- and t2, t2, t3
- beq t2, zero, 4b
- nop
- li t2, 0x80000001
- sw t2, CGU_MUXCR(t1)
-5:
- jr ra
- nop
-
- .end cgu_init
-
-
-/*
- * void sdram_init(long)
- *
- * a0 has the clock value
- */
- .globl sdram_init
- .ent sdram_init
-sdram_init:
-__sdram_init:
-
- li t1, MC_MODUL_BASE
-
-#if 0
- /* Disable memory controller before changing any of its registers */
- sw zero, MC_CTRLENA(t1)
-#endif
-
- li t2, 100000000
- beq a0, t2, 1f
- nop
- li t2, 133000000
- beq a0, t2, 2f
- nop
- li t2, 150000000
- beq a0, t2, 3f
- nop
- b 5f
- nop
-
- /* 100 MHz clock */
-1:
- /* Set clock ratio (clkrat=1:1, rddel=3) */
- li t2, 0x00000003
- sw t2, MC_IOGP(t1)
-
- /* Set sdram refresh rate (4K/64ms @ 100MHz) */
- li t2, 0x0000061A
- b 4f
- sw t2, MC_TREFRESH(t1)
-
- /* 133 MHz clock */
-2:
- /* Set clock ratio (clkrat=1:1, rddel=3) */
- li t2, 0x00000003
- sw t2, MC_IOGP(t1)
-
- /* Set sdram refresh rate (4K/64ms @ 133MHz) */
- li t2, 0x00000822
- b 4f
- sw t2, MC_TREFRESH(t1)
-
- /* 150 MHz clock */
-3:
- /* Set clock ratio (clkrat=3:2, rddel=4) */
- li t2, 0x00000014
- sw t2, MC_IOGP(t1)
-
- /* Set sdram refresh rate (4K/64ms @ 150MHz) */
- li t2, 0x00000927
- sw t2, MC_TREFRESH(t1)
-
-4:
- /* Clear Error log registers */
- sw zero, MC_ERRCAUSE(t1)
- sw zero, MC_ERRADDR(t1)
-
- /* Clear Power-down registers */
- sw zero, MC_SELFRFSH(t1)
-
- /* Set CAS Latency */
- li t2, 0x00000020 /* CL = 2 */
- sw t2, MC_MRSCODE(t1)
-
- /* Set word width to 16 bit */
- li t2, 0x2
- sw t2, MC_CFGDW(t1)
-
- /* Set CS0 to SDRAM parameters */
- li t2, 0x000014C9
- sw t2, MC_CFGPB0(t1)
-
- /* Set SDRAM latency parameters */
- li t2, 0x00026325 /* BC PC100 */
- sw t2, MC_LATENCY(t1)
-
-5:
- /* Finally enable the controller */
- li t2, 0x00000001
- sw t2, MC_CTRLENA(t1)
-
- jr ra
- nop
-
- .end sdram_init
-
-
- .globl lowlevel_init
- .ent lowlevel_init
-lowlevel_init:
-
- /* Disable Watchdog.
- */
- la t9, disable_incaip_wdt
- jalr t9
- nop
-
- /* EBU, CGU and SDRAM Initialization.
- */
- li a0, CONFIG_CPU_CLOCK_RATE
- move t0, ra
-
- /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init()
- * modify t0 and a0.
- */
- bal __cgu_init
- nop
- bal __ebu_init
- nop
- bal __sdram_init
- nop
- move ra, t0
-
- jr ra
- nop
-
- .end lowlevel_init
diff --git a/boards.cfg b/boards.cfg
index c83aff3b14..f1f699458b 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -519,10 +519,6 @@ Active mips mips32 au1x00 - dbau1x00
Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange <thomas@corelatus.se>
Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 -
-Active mips mips32 incaip - incaip incaip - Wolfgang Denk <wd@denx.de>
-Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk <wd@denx.de>
-Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk <wd@denx.de>
-Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk <wd@denx.de>
Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN -
Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN -
Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes <uboot@andestech.com>
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 15c39e7675..f9742e7d49 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -125,3 +125,4 @@ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwar
adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com>
R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com>
CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+incaip mips mips32 - 2014-04-17 Wolfgang Denk <wd@denx.de>
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 7f9ce90a6d..c25b3c93ce 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GRETH) += greth.o
-obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o
diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c
deleted file mode 100644
index cdfbfa67d8..0000000000
--- a/drivers/net/inca-ip_sw.c
+++ /dev/null
@@ -1,793 +0,0 @@
-/*
- * INCA-IP internal switch ethernet driver.
- *
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-
-#include <common.h>
-
-#include <malloc.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/inca-ip.h>
-#include <asm/addrspace.h>
-
-
-#define NUM_RX_DESC PKTBUFSRX
-#define NUM_TX_DESC 3
-#define TOUT_LOOP 1000000
-
-
-#define DELAY udelay(10000)
- /* Sometimes the store word instruction hangs while writing to one
- * of the Switch registers. Moving the instruction into a separate
- * function somehow makes the problem go away.
- */
-static void SWORD(volatile u32 * reg, u32 value)
-{
- *reg = value;
-}
-
-#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
-#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
-#define SW_WRITE_REG(reg, value) \
- SWORD(reg, value);\
- DELAY;\
- SWORD(reg, value);
-
-#define SW_READ_REG(reg, value) \
- value = (u32)*((volatile u32*)reg);\
- DELAY;\
- value = (u32)*((volatile u32*)reg);
-
-#define INCA_DMA_TX_POLLING_TIME 0x07
-#define INCA_DMA_RX_POLLING_TIME 0x07
-
-#define INCA_DMA_TX_HOLD 0x80000000
-#define INCA_DMA_TX_EOP 0x40000000
-#define INCA_DMA_TX_SOP 0x20000000
-#define INCA_DMA_TX_ICPT 0x10000000
-#define INCA_DMA_TX_IEOP 0x08000000
-
-#define INCA_DMA_RX_C 0x80000000
-#define INCA_DMA_RX_SOP 0x40000000
-#define INCA_DMA_RX_EOP 0x20000000
-
-#define INCA_SWITCH_PHY_SPEED_10H 0x1
-#define INCA_SWITCH_PHY_SPEED_10F 0x5
-#define INCA_SWITCH_PHY_SPEED_100H 0x2
-#define INCA_SWITCH_PHY_SPEED_100F 0x6
-
-/************************ Auto MDIX settings ************************/
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
-#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT
-#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16
-
-#define WAIT_SIGNAL_RETRIES 100
-#define WAIT_LINK_RETRIES 100
-#define LINK_RETRY_DELAY 2000 /* ms */
-/********************************************************************/
-
-typedef struct
-{
- union {
- struct {
- volatile u32 HOLD :1;
- volatile u32 ICpt :1;
- volatile u32 IEop :1;
- volatile u32 offset :3;
- volatile u32 reserved0 :4;
- volatile u32 NFB :22;
- }field;
-
- volatile u32 word;
- }params;
-
- volatile u32 nextRxDescPtr;
-
- volatile u32 RxDataPtr;
-
- union {
- struct {
- volatile u32 C :1;
- volatile u32 Sop :1;
- volatile u32 Eop :1;
- volatile u32 reserved3 :12;
- volatile u32 NBT :17;
- }field;
-
- volatile u32 word;
- }status;
-
-} inca_rx_descriptor_t;
-
-
-typedef struct
-{
- union {
- struct {
- volatile u32 HOLD :1;
- volatile u32 Eop :1;
- volatile u32 Sop :1;
- volatile u32 ICpt :1;
- volatile u32 IEop :1;
- volatile u32 reserved0 :5;
- volatile u32 NBA :22;
- }field;
-
- volatile u32 word;
- }params;
-
- volatile u32 nextTxDescPtr;
-
- volatile u32 TxDataPtr;
-
- volatile u32 C :1;
- volatile u32 reserved3 :31;
-
-} inca_tx_descriptor_t;
-
-
-static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
-static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
-
-static int tx_new, rx_new, tx_hold, rx_hold;
-static int tx_old_hold = -1;
-static int initialized = 0;
-
-
-static int inca_switch_init(struct eth_device *dev, bd_t * bis);
-static int inca_switch_send(struct eth_device *dev, void *packet, int length);
-static int inca_switch_recv(struct eth_device *dev);
-static void inca_switch_halt(struct eth_device *dev);
-static void inca_init_switch_chip(void);
-static void inca_dma_init(void);
-static int inca_amdix(void);
-
-
-int inca_switch_initialize(bd_t * bis)
-{
- struct eth_device *dev;
-
-#if 0
- printf("Entered inca_switch_initialize()\n");
-#endif
-
- if (!(dev = (struct eth_device *) malloc (sizeof *dev))) {
- printf("Failed to allocate memory\n");
- return 0;
- }
- memset(dev, 0, sizeof(*dev));
-
- inca_dma_init();
-
- inca_init_switch_chip();
-
-#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
- inca_amdix();
-#endif
-
- sprintf(dev->name, "INCA-IP Switch");
- dev->init = inca_switch_init;
- dev->halt = inca_switch_halt;
- dev->send = inca_switch_send;
- dev->recv = inca_switch_recv;
-
- eth_register(dev);
-
-#if 0
- printf("Leaving inca_switch_initialize()\n");
-#endif
-
- return 0;
-}
-
-
-static int inca_switch_init(struct eth_device *dev, bd_t * bis)
-{
- int i;
- u32 v, regValue;
- u16 wTmp;
-
-#if 0
- printf("Entering inca_switch_init()\n");
-#endif
-
- /* Set MAC address.
- */
- wTmp = (u16)dev->enetaddr[0];
- regValue = (wTmp << 8) | dev->enetaddr[1];
-
- SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
-
- wTmp = (u16)dev->enetaddr[2];
- regValue = (wTmp << 8) | dev->enetaddr[3];
- regValue = regValue << 16;
- wTmp = (u16)dev->enetaddr[4];
- regValue |= (wTmp<<8) | dev->enetaddr[5];
-
- SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
-
- /* Initialize the descriptor rings.
- */
- for (i = 0; i < NUM_RX_DESC; i++) {
- inca_rx_descriptor_t * rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[i]);
- memset(rx_desc, 0, sizeof(rx_ring[i]));
-
- /* Set maximum size of receive buffer.
- */
- rx_desc->params.field.NFB = PKTSIZE_ALIGN;
-
- /* Set the offset of the receive buffer. Zero means
- * that the offset mechanism is not used.
- */
- rx_desc->params.field.offset = 0;
-
- /* Check if it is the last descriptor.
- */
- if (i == (NUM_RX_DESC - 1)) {
- /* Let the last descriptor point to the first
- * one.
- */
- rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(rx_ring);
- } else {
- /* Set the address of the next descriptor.
- */
- rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(&rx_ring[i+1]);
- }
-
- rx_desc->RxDataPtr = (u32)CKSEG1ADDR(NetRxPackets[i]);
- }
-
-#if 0
- printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
- printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
-#endif
-
- for (i = 0; i < NUM_TX_DESC; i++) {
- inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[i]);
-
- memset(tx_desc, 0, sizeof(tx_ring[i]));
-
- tx_desc->params.word = 0;
- tx_desc->params.field.HOLD = 1;
- tx_desc->C = 1;
-
- /* Check if it is the last descriptor.
- */
- if (i == (NUM_TX_DESC - 1)) {
- /* Let the last descriptor point to the
- * first one.
- */
- tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(tx_ring);
- } else {
- /* Set the address of the next descriptor.
- */
- tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(&tx_ring[i+1]);
- }
- }
-
- /* Initialize RxDMA.
- */
- DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
- debug("RX status = 0x%08X\n", v);
-
- /* Writing to the FRDA of CHANNEL.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
-
- /* Writing to the COMMAND REG.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT);
-
- /* Initialize TxDMA.
- */
- DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
- debug("TX status = 0x%08X\n", v);
-
- /* Writing to the FRDA of CHANNEL.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
-
- tx_new = rx_new = 0;
-
- tx_hold = NUM_TX_DESC - 1;
- rx_hold = NUM_RX_DESC - 1;
-
-#if 0
- rx_ring[rx_hold].params.field.HOLD = 1;
-#endif
- /* enable spanning tree forwarding, enable the CPU port */
- /* ST_PT:
- * CPS (CPU port status) 0x3 (forwarding)
- * LPS (LAN port status) 0x3 (forwarding)
- * PPS (PC port status) 0x3 (forwarding)
- */
- SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
-
-#if 0
- printf("Leaving inca_switch_init()\n");
-#endif
-
- return 0;
-}
-
-
-static int inca_switch_send(struct eth_device *dev, void *packet, int length)
-{
- int i;
- int res = -1;
- u32 command;
- u32 regValue;
- inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_new]);
-
-#if 0
- printf("Entered inca_switch_send()\n");
-#endif
-
- if (length <= 0) {
- printf ("%s: bad packet size: %d\n", dev->name, length);
- goto Done;
- }
-
- for(i = 0; tx_desc->C == 0; i++) {
- if (i >= TOUT_LOOP) {
- printf("%s: tx error buffer not ready\n", dev->name);
- goto Done;
- }
- }
-
- if (tx_old_hold >= 0) {
- ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_old_hold]))->params.field.HOLD = 1;
- }
- tx_old_hold = tx_hold;
-
- tx_desc->params.word =
- (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
-
- tx_desc->C = 0;
- tx_desc->TxDataPtr = (u32)packet;
- tx_desc->params.field.NBA = length;
-
- ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->params.field.HOLD = 0;
-
- tx_hold = tx_new;
- tx_new = (tx_new + 1) % NUM_TX_DESC;
-
-
- if (! initialized) {
- command = INCA_IP_DMA_DMA_TXCCR0_INIT;
- initialized = 1;
- } else {
- command = INCA_IP_DMA_DMA_TXCCR0_HR;
- }
-
- DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
- regValue |= command;
-#if 0
- printf("regValue = 0x%x\n", regValue);
-#endif
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
-
-#if 1
- for(i = 0; ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->C == 0; i++) {
- if (i >= TOUT_LOOP) {
- printf("%s: tx buffer not ready\n", dev->name);
- goto Done;
- }
- }
-#endif
- res = length;
-Done:
-#if 0
- printf("Leaving inca_switch_send()\n");
-#endif
- return res;
-}
-
-
-static int inca_switch_recv(struct eth_device *dev)
-{
- int length = 0;
- inca_rx_descriptor_t * rx_desc;
-
-#if 0
- printf("Entered inca_switch_recv()\n");
-#endif
-
- for (;;) {
- rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_new]);
-
- if (rx_desc->status.field.C == 0) {
- break;
- }
-
-#if 0
- rx_ring[rx_new].params.field.HOLD = 1;
-#endif
-
- if (! rx_desc->status.field.Eop) {
- printf("Partly received packet!!!\n");
- break;
- }
-
- length = rx_desc->status.field.NBT;
- rx_desc->status.word &=
- ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
-#if 0
-{
- int i;
- for (i=0;i<length - 4;i++) {
- if (i % 16 == 0) printf("\n%04x: ", i);
- printf("%02X ", NetRxPackets[rx_new][i]);
- }
- printf("\n");
-}
-#endif
-
- if (length) {
-#if 0
- printf("Received %d bytes\n", length);
-#endif
- NetReceive((void*)CKSEG1ADDR(NetRxPackets[rx_new]), length - 4);
- } else {
-#if 1
- printf("Zero length!!!\n");
-#endif
- }
-
-
- ((inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_hold]))->params.field.HOLD = 0;
-
- rx_hold = rx_new;
-
- rx_new = (rx_new + 1) % NUM_RX_DESC;
- }
-
-#if 0
- printf("Leaving inca_switch_recv()\n");
-#endif
-
- return length;
-}
-
-
-static void inca_switch_halt(struct eth_device *dev)
-{
-#if 0
- printf("Entered inca_switch_halt()\n");
-#endif
-
-#if 1
- initialized = 0;
-#endif
-#if 1
- /* Disable forwarding to the CPU port.
- */
- SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
-
- /* Close RxDMA channel.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
-
- /* Close TxDMA channel.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
-
-
-#endif
-#if 0
- printf("Leaving inca_switch_halt()\n");
-#endif
-}
-
-
-static void inca_init_switch_chip(void)
-{
- u32 regValue;
-
- /* To workaround a problem with collision counter
- * (see Errata sheet).
- */
- SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
- SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
-
-#if 1
- /* init MDIO configuration:
- * MDS (Poll speed): 0x01 (4ms)
- * PHY_LAN_ADDR: 0x06
- * PHY_PC_ADDR: 0x05
- * UEP (Use External PHY): 0x00 (Internal PHY is used)
- * PS (Port Select): 0x00 (PT/UMM for LAN)
- * PT (PHY Test): 0x00 (no test mode)
- * UMM (Use MDIO Mode): 0x00 (state machine is disabled)
- */
- SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
-
- /* init PHY:
- * SL (Auto Neg. Speed for LAN)
- * SP (Auto Neg. Speed for PC)
- * LL (Link Status for LAN)
- * LP (Link Status for PC)
- * DL (Duplex Status for LAN)
- * DP (Duplex Status for PC)
- * PL (Auto Neg. Pause Status for LAN)
- * PP (Auto Neg. Pause Status for PC)
- */
- SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
-
- /* MDIO_ACC:
- * RA (Request/Ack) 0x01 (Request)
- * RW (Read/Write) 0x01 (Write)
- * PHY_ADDR 0x05 (PC)
- * REG_ADDR 0x00 (PHY_BCR: basic control register)
- * PHY_DATA 0x8000
- * Reset - software reset
- * LB (loop back) - normal
- * SS (speed select) - 10 Mbit/s
- * ANE (auto neg. enable) - enable
- * PD (power down) - normal
- * ISO (isolate) - normal
- * RAN (restart auto neg.) - normal
- * DM (duplex mode) - half duplex
- * CT (collision test) - enable
- */
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000);
-
- /* MDIO_ACC:
- * RA (Request/Ack) 0x01 (Request)
- * RW (Read/Write) 0x01 (Write)
- * PHY_ADDR 0x06 (LAN)
- * REG_ADDR 0x00 (PHY_BCR: basic control register)
- * PHY_DATA 0x8000
- * Reset - software reset
- * LB (loop back) - normal
- * SS (speed select) - 10 Mbit/s
- * ANE (auto neg. enable) - enable
- * PD (power down) - normal
- * ISO (isolate) - normal
- * RAN (restart auto neg.) - normal
- * DM (duplex mode) - half duplex
- * CT (collision test) - enable
- */
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000);
-
-#endif
-
- /* Make sure the CPU port is disabled for now. We
- * don't want packets to get stacked for us until
- * we enable DMA and are prepared to receive them.
- */
- SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
-
- SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
-
- /* CRC GEN is enabled.
- */
- regValue |= 0x00000200;
- SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
-
- /* ADD TAG is disabled.
- */
- SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
- regValue &= ~0x00000002;
- SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
-}
-
-
-static void inca_dma_init(void)
-{
- /* Switch off all DMA channels.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
-
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
-
- /* Setup TX channel polling time.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
-
- /* Setup RX channel polling time.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
-
- /* ERRATA: write reset value into the DMA RX IMR register.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
-
- /* Just in case: disable all transmit interrupts also.
- */
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
-
- DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
- DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
-}
-
-#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
-static int inca_amdix(void)
-{
- u32 phyReg1 = 0;
- u32 phyReg4 = 0;
- u32 phyReg5 = 0;
- u32 phyReg6 = 0;
- u32 phyReg31 = 0;
- u32 regEphy = 0;
- int mdi_flag;
- int retries;
-
- /* Setup GPIO pins.
- */
- *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
- *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
-
-#if 0
- /* Wait for signal.
- */
- retries = WAIT_SIGNAL_RETRIES;
- while (--retries) {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (17 << 16)); /* PHY_MCSR */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
- } while (phyReg1 & (1 << 31));
-
- if (phyReg1 & (1 << 1)) {
- /* Signal detected */
- break;
- }
- }
-
- if (!retries)
- goto Fail;
-#endif
-
- /* Set MDI mode.
- */
- *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
- mdi_flag = 1;
-
- /* Wait for link.
- */
- retries = WAIT_LINK_RETRIES;
- while (--retries) {
- udelay(LINK_RETRY_DELAY * 1000);
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (1 << 16)); /* PHY_BSR */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
- } while (phyReg1 & (1 << 31));
-
- if (phyReg1 & (1 << 2)) {
- /* Link is up */
- break;
- } else if (mdi_flag) {
- /* Set MDIX mode */
- *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
- mdi_flag = 0;
- } else {
- /* Set MDI mode */
- *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
- mdi_flag = 1;
- }
- }
-
- if (!retries) {
- goto Fail;
- } else {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (1 << 16)); /* PHY_BSR */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
- } while (phyReg1 & (1 << 31));
-
- /* Auto-negotiation / Parallel detection complete
- */
- if (phyReg1 & (1 << 5)) {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (31 << 16)); /* PHY_SCSR */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
- } while (phyReg31 & (1 << 31));
-
- switch ((phyReg31 >> 2) & 0x7) {
- case INCA_SWITCH_PHY_SPEED_10H:
- /* 10Base-T Half-duplex */
- regEphy = 0;
- break;
- case INCA_SWITCH_PHY_SPEED_10F:
- /* 10Base-T Full-duplex */
- regEphy = INCA_IP_Switch_EPHY_DL;
- break;
- case INCA_SWITCH_PHY_SPEED_100H:
- /* 100Base-TX Half-duplex */
- regEphy = INCA_IP_Switch_EPHY_SL;
- break;
- case INCA_SWITCH_PHY_SPEED_100F:
- /* 100Base-TX Full-duplex */
- regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
- break;
- }
-
- /* In case of Auto-negotiation,
- * update the negotiated PAUSE support status
- */
- if (phyReg1 & (1 << 3)) {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (6 << 16)); /* MII_EXPANSION */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
- } while (phyReg6 & (1 << 31));
-
- /* We are Autoneg-able.
- * Is Link partner also able to autoneg?
- */
- if (phyReg6 & (1 << 0)) {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (4 << 16)); /* MII_ADVERTISE */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
- } while (phyReg4 & (1 << 31));
-
- /* We advertise PAUSE capab.
- * Does link partner also advertise it?
- */
- if (phyReg4 & (1 << 10)) {
- SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
- (0x1 << 31) | /* RA */
- (0x0 << 30) | /* Read */
- (0x6 << 21) | /* LAN */
- (5 << 16)); /* MII_LPA */
- do {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
- } while (phyReg5 & (1 << 31));
-
- /* Link partner is PAUSE capab.
- */
- if (phyReg5 & (1 << 10)) {
- regEphy |= INCA_IP_Switch_EPHY_PL;
- }
- }
- }
-
- }
-
- /* Link is up */
- regEphy |= INCA_IP_Switch_EPHY_LL;
-
- SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
- }
- }
-
- return 0;
-
-Fail:
- printf("No Link on LAN port\n");
- return -1;
-}
-#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */
diff --git a/include/common.h b/include/common.h
index baf361b3e5..5fb0bb2d3d 100644
--- a/include/common.h
+++ b/include/common.h
@@ -681,9 +681,6 @@ ulong get_UCLK (void);
#if defined(CONFIG_LH7A40X)
ulong get_PLLCLK (void);
#endif
-#if defined CONFIG_INCA_IP
-uint incaip_get_cpuclk (void);
-#endif
#if defined(CONFIG_IMX)
ulong get_systemPLLCLK(void);
ulong get_FCLK(void);
diff --git a/include/configs/incaip.h b/include/configs/incaip.h
deleted file mode 100644
index e11d1843b9..0000000000
--- a/include/configs/incaip.h
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * This file contains the configuration parameters for the INCA-IP board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */
-
-#define CONFIG_XWAY_SWAP_BYTES
-
-/*
- * Clock for the MIPS core (MHz)
- * allowed values: 100000000, 133000000, and 150000000 (default)
- */
-#ifndef CONFIG_CPU_CLOCK_RATE
-#define CONFIG_CPU_CLOCK_RATE 150000000
-#endif
-
-#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */
-
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off\0" \
- "addmisc=setenv bootargs ${bootargs} " \
- "console=ttyS0,${baudrate} " \
- "ethaddr=${ethaddr} " \
- "panic=1\0" \
- "flash_nfs=run nfsargs addip addmisc;" \
- "bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addmisc;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 80500000 ${bootfile};" \
- "run nfsargs addip addmisc;bootm\0" \
- "rootpath=/opt/eldk/mips_4KC\0" \
- "bootfile=/tftpboot/INCA/uImage\0" \
- "kernel_addr=B0040000\0" \
- "ramdisk_addr=B0100000\0" \
- "u-boot=/tftpboot/INCA/u-boot.bin\0" \
- "load=tftp 80500000 ${u-boot}\0" \
- "update=protect off 1:0-2;era 1:0-2;" \
- "cp.b 80500000 B0000000 ${filesize}\0" \
- ""
-#define CONFIG_BOOTCOMMAND "run flash_self"
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "INCA-IP # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-
-#define CONFIG_SYS_MALLOC_LEN 128*1024
-
-#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
-
-#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2)
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-
-#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */
-
-#define CONFIG_SYS_MEMTEST_START 0x80100000
-#define CONFIG_SYS_MEMTEST_END 0x80800000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */
-
-/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-
-#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR 0xB0030000
-#define CONFIG_ENV_SIZE 0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_INCA_IP_SWITCH
-#define CONFIG_INCA_IP_SWITCH_AMDIX
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, use all space on the device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor1"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0"
-#define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \
- "64k(env)," \
- "768k(linux)," \
- "1m@3m(rootfs)," \
- "768k(linux2)," \
- "3m@5m(rootfs2)"
-*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_DCACHE_SIZE 4096
-#define CONFIG_SYS_ICACHE_SIZE 4096
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#endif /* __CONFIG_H */
diff --git a/include/netdev.h b/include/netdev.h
index 32b5073ef0..e211f1841f 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -54,7 +54,6 @@ int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
-int inca_switch_initialize(bd_t *bis);
int ks8695_eth_initialize(void);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);