diff options
54 files changed, 2496 insertions, 999 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 64a168a7460..33821b8707f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -530,6 +530,11 @@ Dave Peverley <dpeverley@mpc-data.co.uk> omap730p2 ARM926EJS +Stelian Pop <stelian.pop@leadtechdesign.com> + + at91cap9adk ARM926EJS (AT91CAP9 SoC) + at91sam9260ek ARM926EJS (AT91SAM9260 SoC) + Stefan Roese <sr@denx.de> ixdpg425 xscale @@ -452,6 +452,7 @@ LIST_ARM7=" \ LIST_ARM9=" \ at91cap9adk \ at91rm9200dk \ + at91sam9260ek \ cmc_pu2 \ ap920t \ ap922_XA10 \ @@ -463,6 +464,8 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + csb637 \ + kb9202 \ lpd7a400 \ m501sk \ mp2usb \ @@ -472,6 +475,7 @@ LIST_ARM9=" \ omap1510inn \ omap1610h2 \ omap1610inn \ + omap5912osk \ omap730p2 \ sbc2410x \ scb9328 \ @@ -2308,11 +2308,14 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$ xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1))) at91cap9adk_config : unconfig - @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9 + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91sam9 at91rm9200dk_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200 +at91sam9260ek_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs at91sam9260ek atmel at91sam9 + cmc_pu2_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200 diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index 359fdab6002..3961030359f 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -25,10 +25,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := at91cap9adk.o led.o nand.o +COBJS-y += at91cap9adk.o +COBJS-y += led.o +COBJS-$(CONFIG_CMD_NAND) += nand.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 52e62deaedf..24861ba49de 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -23,7 +23,13 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91cap9_matrix.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -40,126 +46,106 @@ DECLARE_GLOBAL_DATA_PTR; static void at91cap9_serial_hw_init(void) { #ifdef CONFIG_USART0 - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA22_TXD0 | AT91C_PA23_RXD0; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US0; + at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); #endif #ifdef CONFIG_USART1 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_TXD1 | AT91C_PD1_RXD1; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US1; + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); #endif #ifdef CONFIG_USART2 - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD2_TXD2 | AT91C_PD3_RXD2; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_US2; + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); #endif #ifdef CONFIG_USART3 /* DBGU */ - AT91C_BASE_PIOC->PIO_PDR = AT91C_PC31_DTXD | AT91C_PC30_DRXD; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); #endif - - } static void at91cap9_nor_hw_init(void) { - /* Ensure EBI supply is 3.3V */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_SUP_3V3; + unsigned long csa; + /* Ensure EBI supply is 3.3V */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS0 for parallel flash */ - AT91C_BASE_SMC->SMC_SETUP0 = AT91C_FLASH_NWE_SETUP | - AT91C_FLASH_NCS_WR_SETUP | - AT91C_FLASH_NRD_SETUP | - AT91C_FLASH_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE0 = AT91C_FLASH_NWE_PULSE | - AT91C_FLASH_NCS_WR_PULSE | - AT91C_FLASH_NRD_PULSE | - AT91C_FLASH_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE0 = AT91C_FLASH_NWE_CYCLE | - AT91C_FLASH_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL0 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_BAT_BYTE_WRITE | - AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | - (AT91C_SMC_TDF & (1 << 16)); + at91_sys_write(AT91_SMC_SETUP(0), + AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) | + AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2)); + at91_sys_write(AT91_SMC_PULSE(0), + AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) | + AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10)); + at91_sys_write(AT91_SMC_CYCLE(0), + AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + at91_sys_write(AT91_SMC_MODE(0), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | + AT91_SMC_DBW_16 | AT91_SMC_TDF_(1)); } #ifdef CONFIG_CMD_NAND static void at91cap9_nand_hw_init(void) { + unsigned long csa; + /* Enable CS3 */ - AT91C_BASE_CCFG->CCFG_EBICSA |= AT91C_EBI_CS3A_SM | AT91C_EBI_SUP_3V3; + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA | + AT91_MATRIX_EBI_VDDIOMSEL_3_3V); /* Configure SMC CS3 for NAND/SmartMedia */ - AT91C_BASE_SMC->SMC_SETUP3 = AT91C_SM_NWE_SETUP | - AT91C_SM_NCS_WR_SETUP | - AT91C_SM_NRD_SETUP | - AT91C_SM_NCS_RD_SETUP; - - AT91C_BASE_SMC->SMC_PULSE3 = AT91C_SM_NWE_PULSE | - AT91C_SM_NCS_WR_PULSE | - AT91C_SM_NRD_PULSE | - AT91C_SM_NCS_RD_PULSE; - - AT91C_BASE_SMC->SMC_CYCLE3 = AT91C_SM_NWE_CYCLE | - AT91C_SM_NRD_CYCLE; - - AT91C_BASE_SMC->SMC_CTRL3 = AT91C_SMC_READMODE | - AT91C_SMC_WRITEMODE | - AT91C_SMC_NWAITM_NWAIT_DISABLE | - AT91C_SMC_DBW_WIDTH_EIGTH_BITS | - AT91C_SM_TDF; - - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) | + AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(1)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); /* RDY/BSY is not connected */ /* Enable NandFlash */ - AT91C_BASE_PIOD->PIO_PER = AT91C_PIO_PD15; - AT91C_BASE_PIOD->PIO_OER = AT91C_PIO_PD15; + at91_set_gpio_output(AT91_PIN_PD15, 1); } #endif #ifdef CONFIG_HAS_DATAFLASH static void at91cap9_spi_hw_init(void) { - AT91C_BASE_PIOD->PIO_BSR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - AT91C_BASE_PIOD->PIO_PDR = AT91C_PD0_SPI0_NPCS2D | - AT91C_PD1_SPI0_NPCS3D; - - AT91C_BASE_PIOA->PIO_ASR = AT91C_PA28_SPI0_NPCS3A; - AT91C_BASE_PIOA->PIO_BSR = AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA28_SPI0_NPCS3A | - AT91C_PA4_SPI0_NPCS2A | - AT91C_PA1_SPI0_MOSI | - AT91C_PA0_SPI0_MISO | - AT91C_PA3_SPI0_NPCS1 | - AT91C_PA5_SPI0_NPCS0 | - AT91C_PA2_SPI0_SPCK; - - /* Enable Clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI0; + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0); } #endif #ifdef CONFIG_MACB static void at91cap9_macb_hw_init(void) { - unsigned int gpio; - /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_EMAC; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC); /* * Disable pull-up on: @@ -169,54 +155,59 @@ static void at91cap9_macb_hw_init(void) * * PHY has internal pull-down */ - AT91C_BASE_PIOB->PIO_PPUDR = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); /* Need to reset PHY -> 500ms reset */ - AT91C_BASE_RSTC->RSTC_RMR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - (AT91C_RSTC_ERSTL & (0x0D << 8)) | - AT91C_RSTC_URSTEN; - AT91C_BASE_RSTC->RSTC_RCR = (AT91C_RSTC_KEY & (0xA5 << 24)) | - AT91C_RSTC_EXTRST; + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); /* Wait for end hardware reset */ - while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL)); + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); /* Re-enable pull-up */ - AT91C_BASE_PIOB->PIO_PPUER = AT91C_PB22_E_RXDV | - AT91C_PB25_E_RX0 | - AT91C_PB26_E_RX1; - -#ifdef CONFIG_RMII - gpio = AT91C_PB30_E_MDIO | - AT91C_PB29_E_MDC | - AT91C_PB21_E_TXCK | - AT91C_PB27_E_RXER | - AT91C_PB25_E_RX0 | - AT91C_PB22_E_RXDV | - AT91C_PB26_E_RX1 | - AT91C_PB28_E_TXEN | - AT91C_PB23_E_TX0 | - AT91C_PB24_E_TX1; - AT91C_BASE_PIOB->PIO_ASR = gpio; - AT91C_BASE_PIOB->PIO_BSR = 0; - AT91C_BASE_PIOB->PIO_PDR = gpio; -#else -#error AT91CAP9A-DK works only in RMII mode + writel(pin_to_mask(AT91_PIN_PB22) | + pin_to_mask(AT91_PIN_PB25) | + pin_to_mask(AT91_PIN_PB26), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ #endif - /* Unlock EMAC, 3 0 2 1 sequence */ #define MP_MAC_KEY0 0x5969cb2a #define MP_MAC_KEY1 0xb4a1872e #define MP_MAC_KEY2 0x05683fbc #define MP_MAC_KEY3 0x3634fba4 #define UNLOCK_MAC 0x00000008 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_MAC_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_MAC_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_MAC_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_MAC_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_MAC; + writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40); } #endif @@ -229,11 +220,11 @@ static void at91cap9_uhp_hw_init(void) #define MP_OHCI_KEY2 0x4823efbc #define MP_OHCI_KEY3 0x8651aae4 #define UNLOCK_OHCI 0x00000010 - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x3c)) = MP_OHCI_KEY3; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x38)) = MP_OHCI_KEY2; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x30)) = MP_OHCI_KEY0; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x34)) = MP_OHCI_KEY1; - *((AT91_REG *)((AT91_REG) MP_BLOCK_3_BASE + 0x40)) = UNLOCK_OHCI; + writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c); + writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38); + writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30); + writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34); + writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40); } #endif diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c index 8588a91a13e..04de1392047 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/board/atmel/at91cap9adk/led.c @@ -23,58 +23,55 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/at91cap9.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> -#define RED_LED AT91C_PIO_PC29 /* this is the power led */ -#define GREEN_LED AT91C_PIO_PA10 /* this is the user1 led */ -#define YELLOW_LED AT91C_PIO_PA11 /* this is the user1 led */ +#define RED_LED AT91_PIN_PC29 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ void red_LED_on(void) { - AT91C_BASE_PIOC->PIO_SODR = RED_LED; + at91_set_gpio_value(RED_LED, 1); } void red_LED_off(void) { - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_value(RED_LED, 0); } void green_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 0); } void green_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED; + at91_set_gpio_value(GREEN_LED, 1); } void yellow_LED_on(void) { - AT91C_BASE_PIOA->PIO_CODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 0); } void yellow_LED_off(void) { - AT91C_BASE_PIOA->PIO_SODR = YELLOW_LED; + at91_set_gpio_value(YELLOW_LED, 1); } void coloured_LED_init(void) { /* Enable clock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_PIOABCD; + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOA->PIO_PER = GREEN_LED | YELLOW_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOA->PIO_OER = GREEN_LED | YELLOW_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOA->PIO_SODR = GREEN_LED | YELLOW_LED; + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); - /* Disable peripherals on LEDs */ - AT91C_BASE_PIOC->PIO_PER = RED_LED; - /* Enable pins as outputs */ - AT91C_BASE_PIOC->PIO_OER = RED_LED; - /* Turn all LEDs OFF */ - AT91C_BASE_PIOC->PIO_CODR = RED_LED; + at91_set_gpio_output(RED_LED, 0); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); } diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c index 2f021262784..c72b0244bd3 100644 --- a/board/atmel/at91cap9adk/nand.c +++ b/board/atmel/at91cap9adk/nand.c @@ -25,9 +25,9 @@ */ #include <common.h> -#include <asm/arch/hardware.h> - -#ifdef CONFIG_CMD_NAND +#include <asm/arch/at91cap9.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> #include <nand.h> @@ -51,10 +51,10 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd) IO_ADDR_W |= MASK_ALE; break; case NAND_CTL_CLRNCE: - AT91C_BASE_PIOD->PIO_SODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 1); break; case NAND_CTL_SETNCE: - AT91C_BASE_PIOD->PIO_CODR = AT91C_PIO_PD15; + at91_set_gpio_value(AT91_PIN_PD15, 0); break; } this->IO_ADDR_W = (void *) IO_ADDR_W; @@ -68,4 +68,3 @@ int board_nand_init(struct nand_chip *nand) return 0; } -#endif diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile new file mode 100644 index 00000000000..8a629b9c8f8 --- /dev/null +++ b/board/atmel/at91sam9260ek/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += at91sam9260ek.o +COBJS-y += led.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c new file mode 100644 index 00000000000..a55468e30d0 --- /dev/null +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91sam9260_matrix.h> +#include <asm/arch/at91sam926x_mc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void at91sam9260ek_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void at91sam9260ek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PC13, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PC14, 1); +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void at91sam9260ek_spi_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ + at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ + + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); +} +#endif + +#ifdef CONFIG_MACB +static void at91sam9260ek_macb_hw_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PA17) => PHY normal mode (not Test mode) + * ERX0 (PA14) => PHY ADDR0 + * ERX1 (PA15) => PHY ADDR1 + * ERX2 (PA25) => PHY ADDR2 + * ERX3 (PA26) => PHY ADDR3 + * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUDR); + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Restore NRST value */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0 << 8) | + AT91_RSTC_URSTEN); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PA14) | + pin_to_mask(AT91_PIN_PA15) | + pin_to_mask(AT91_PIN_PA17) | + pin_to_mask(AT91_PIN_PA25) | + pin_to_mask(AT91_PIN_PA26) | + pin_to_mask(AT91_PIN_PA28), + pin_to_controller(AT91_PIN_PA0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ + at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ +#endif + +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91sam9260ek_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9260ek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91sam9260ek_spi_hw_init(); +#endif +#ifdef CONFIG_MACB + at91sam9260ek_macb_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif diff --git a/board/atmel/at91sam9260ek/config.mk b/board/atmel/at91sam9260ek/config.mk new file mode 100644 index 00000000000..ff2cfd170bb --- /dev/null +++ b/board/atmel/at91sam9260ek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c new file mode 100644 index 00000000000..4c53742e50e --- /dev/null +++ b/board/atmel/at91sam9260ek/led.c @@ -0,0 +1,64 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PA9 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); +} diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c new file mode 100644 index 00000000000..abb788afe7b --- /dev/null +++ b/board/atmel/at91sam9260ek/nand.c @@ -0,0 +1,76 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9260.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + case NAND_CTL_CLRNCE: + at91_set_gpio_value(AT91_PIN_PC14, 1); + break; + case NAND_CTL_SETNCE: + at91_set_gpio_value(AT91_PIN_PC14, 0); + break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +static int at91sam9260ek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PC13); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; + nand->hwcontrol = at91sam9260ek_nand_hwcontrol; + nand->dev_ready = at91sam9260ek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds new file mode 100644 index 00000000000..05a6d83d565 --- /dev/null +++ b/board/atmel/at91sam9260ek/u-boot.lds @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/m501sk/memsetup.S b/board/m501sk/memsetup.S index 9e174b5b8fc..6aea723f91f 100644 --- a/board/m501sk/memsetup.S +++ b/board/m501sk/memsetup.S @@ -52,8 +52,8 @@ #define MC_AASR_VAL 0x00000000 #define EBI_CFGR 0xFFFFFF64 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR 0xFFFFFF70 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0 0xFFFFFF70 +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR 0xFFFFFC28 @@ -141,8 +141,8 @@ SMRDATA: .word MC_AASR_VAL .word EBI_CFGR .word EBI_CFGR_VAL - .word SMC2_CSR - .word SMC2_CSR_VAL + .word SMC_CSR0 + .word SMC_CSR0_VAL .word PLLAR .word PLLAR_VAL .word PLLBR diff --git a/common/cmd_flash.c b/common/cmd_flash.c index f56443e25e3..db5dec9049a 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -41,6 +41,7 @@ int find_dev_and_part(const char *id, struct mtd_device **dev, u8 *part_num, struct part_info **part); #endif +#ifndef CFG_NO_FLASH extern flash_info_t flash_info[]; /* info for FLASH chips */ /* @@ -275,15 +276,19 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, return rcode; } +#endif /* CFG_NO_FLASH */ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH ulong bank; +#endif #ifdef CONFIG_HAS_DATAFLASH dataflash_print_info(); #endif +#ifndef CFG_NO_FLASH if (argc == 1) { /* print info for all FLASH banks */ for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) { printf ("\nBank # %ld: ", bank+1); @@ -301,11 +306,13 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } printf ("\nBank # %ld: ", bank); flash_print_info (&flash_info[bank-1]); +#endif /* CFG_NO_FLASH */ return 0; } int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH flash_info_t *info; ulong bank, addr_first, addr_last; int n, sect_first, sect_last; @@ -397,8 +404,12 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) rcode = flash_sect_erase(addr_first, addr_last); return rcode; +#else + return 0; +#endif /* CFG_NO_FLASH */ } +#ifndef CFG_NO_FLASH int flash_sect_erase (ulong addr_first, ulong addr_last) { flash_info_t *info; @@ -439,12 +450,17 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) } return rcode; } +#endif /* CFG_NO_FLASH */ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { +#ifndef CFG_NO_FLASH flash_info_t *info; - ulong bank, addr_first, addr_last; - int i, p, n, sect_first, sect_last; + ulong bank; + int i, n, sect_first, sect_last; +#endif /* CFG_NO_FLASH */ + ulong addr_first, addr_last; + int p; #if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_JFFS2_CMDLINE) struct mtd_device *dev; struct part_info *part; @@ -487,6 +503,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } #endif +#ifndef CFG_NO_FLASH if (strcmp(argv[2], "all") == 0) { for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) { info = &flash_info[bank-1]; @@ -611,10 +628,11 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } rcode = flash_sect_protect (p, addr_first, addr_last); +#endif /* CFG_NO_FLASH */ return rcode; } - +#ifndef CFG_NO_FLASH int flash_sect_protect (int p, ulong addr_first, ulong addr_last) { flash_info_t *info; @@ -667,6 +685,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) } return rcode; } +#endif /* CFG_NO_FLASH */ /**************************************************/ diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 4262e26a615..d6d7a5b77f9 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -492,7 +492,11 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } /* Check if we are copying from DataFlash to RAM */ - if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){ + if (addr_dataflash(addr) && !addr_dataflash(dest) +#ifndef CFG_NO_FLASH + && (addr2info(dest) == NULL) +#endif + ){ int rc; rc = read_dataflash(addr, count * size, (char *) dest); if (rc != 1) { diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S index 1902bd02c5d..98363eb4005 100644 --- a/cpu/arm920t/at91rm9200/lowlevel_init.S +++ b/cpu/arm920t/at91rm9200/lowlevel_init.S @@ -46,7 +46,7 @@ #define MC_ASR 0xFFFFFF04 #define MC_AASR 0xFFFFFF08 #define EBI_CFGR 0xFFFFFF64 -#define SMC2_CSR 0xFFFFFF70 +#define SMC_CSR0 0xFFFFFF70 /* clocks */ #define PLLAR 0xFFFFFC28 @@ -146,8 +146,8 @@ SMRDATA: .word MC_AASR_VAL .word EBI_CFGR .word EBI_CFGR_VAL - .word SMC2_CSR - .word SMC2_CSR_VAL + .word SMC_CSR0 + .word SMC_CSR0_VAL .word PLLAR .word PLLAR_VAL .word PLLBR diff --git a/cpu/arm926ejs/at91cap9/spi.c b/cpu/arm926ejs/at91cap9/spi.c deleted file mode 100644 index 0953820bdf6..00000000000 --- a/cpu/arm926ejs/at91cap9/spi.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Driver for ATMEL DataFlash support - * Author : Hamid Ikdoumi (Atmel) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <config.h> -#include <common.h> -#include <asm/hardware.h> - -#ifdef CONFIG_HAS_DATAFLASH -#include <dataflash.h> - -/* Max Value = 10MHz to be compliant to the Continuous Array Read function */ -#define AT91C_SPI_CLK 10000000 - -/* AC Characteristics: DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -#define DATAFLASH_TCSS (0xFA << 16) -#define DATAFLASH_TCHS (0x8 << 24) - -#define AT91C_TIMEOUT_WRDY 200000 -#define AT91C_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ - -void AT91F_SpiInit(void) -{ - /* Reset the SPI */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SWRST; - - /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI0->SPI_MR = - AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; - - /* Configure CS0 */ - AT91C_BASE_SPI0->SPI_CSR[0] = - AT91C_SPI_CPOL | - (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -} - -void AT91F_SpiEnable(int cs) -{ - switch (cs) { - case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS0_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - case 3: - AT91C_BASE_SPI0->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI0->SPI_MR |= - ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - } - - /* SPI_Enable */ - AT91C_BASE_SPI0->SPI_CR = AT91C_SPI_SPIEN; -} - -unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -{ - unsigned int timeout; - - pDesc->state = BUSY; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI0->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt; - AT91C_BASE_SPI0->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt; - - /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI0->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI0->SPI_TCR = pDesc->tx_cmd_size; - - if (pDesc->tx_data_size != 0) { - /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI0->SPI_RNPR = (unsigned int)pDesc->rx_data_pt; - AT91C_BASE_SPI0->SPI_TNPR = (unsigned int)pDesc->tx_data_pt; - - /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI0->SPI_RNCR = pDesc->rx_data_size; - AT91C_BASE_SPI0->SPI_TNCR = pDesc->tx_data_size; - } - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked(); - timeout = 0; - - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while (!(AT91C_BASE_SPI0->SPI_SR & AT91C_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); - AT91C_BASE_SPI0->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - pDesc->state = IDLE; - - if (timeout >= CFG_SPI_WRITE_TOUT) { - printf("Error Timeout\n\r"); - return DATAFLASH_ERROR; - } - - return DATAFLASH_OK; -} -#endif diff --git a/cpu/arm926ejs/at91cap9/Makefile b/cpu/arm926ejs/at91sam9/Makefile index bf15e1edb33..203abc28e14 100644 --- a/cpu/arm926ejs/at91cap9/Makefile +++ b/cpu/arm926ejs/at91sam9/Makefile @@ -25,11 +25,14 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).a -COBJS = ether.o timer.o spi.o usb.o +COBJS-y += ether.o +COBJS-y += timer.o +COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o +COBJS-y += usb.o SOBJS = lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) all: $(obj).depend $(LIB) diff --git a/cpu/arm926ejs/at91cap9/config.mk b/cpu/arm926ejs/at91sam9/config.mk index ca2cae181bc..ca2cae181bc 100644 --- a/cpu/arm926ejs/at91cap9/config.mk +++ b/cpu/arm926ejs/at91sam9/config.mk diff --git a/cpu/arm926ejs/at91cap9/ether.c b/cpu/arm926ejs/at91sam9/ether.c index b7958d5aba1..e4f56012aa1 100644 --- a/cpu/arm926ejs/at91cap9/ether.c +++ b/cpu/arm926ejs/at91sam9/ether.c @@ -23,13 +23,13 @@ */ #include <common.h> -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/hardware.h> extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET) -void at91cap9_eth_initialize(bd_t *bi) +void at91sam9_eth_initialize(bd_t *bi) { - macb_eth_initialize(0, (void *)AT91C_BASE_MACB, 0x00); + macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00); } #endif diff --git a/cpu/arm926ejs/at91cap9/lowlevel_init.S b/cpu/arm926ejs/at91sam9/lowlevel_init.S index 24d950cf74e..40a3f6aaef6 100644 --- a/cpu/arm926ejs/at91cap9/lowlevel_init.S +++ b/cpu/arm926ejs/at91sam9/lowlevel_init.S @@ -1,5 +1,5 @@ /* - * AT91CAP9 setup stuff + * AT91CAP9/SAM9 setup stuff * * (C) Copyright 2007-2008 * Stelian Pop <stelian.pop <at> leadtechdesign.com> diff --git a/cpu/arm926ejs/at91sam9/spi.c b/cpu/arm926ejs/at91sam9/spi.c new file mode 100644 index 00000000000..c9fe6d8a3fc --- /dev/null +++ b/cpu/arm926ejs/at91sam9/spi.c @@ -0,0 +1,157 @@ +/* + * Driver for ATMEL DataFlash support + * Author : Hamid Ikdoumi (Atmel) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/at91_spi.h> + +#include <dataflash.h> + +#define AT91_SPI_PCS0_DATAFLASH_CARD 0xE /* Chip Select 0: NPCS0%1110 */ +#define AT91_SPI_PCS1_DATAFLASH_CARD 0xD /* Chip Select 0: NPCS0%1101 */ +#define AT91_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3: NPCS3%0111 */ + +void AT91F_SpiInit(void) +{ + /* Reset the SPI */ + writel(AT91_SPI_SWRST, AT91_BASE_SPI + AT91_SPI_CR); + + /* Configure SPI in Master Mode with No CS selected !!! */ + writel(AT91_SPI_MSTR | AT91_SPI_MODFDIS | AT91_SPI_PCS, + AT91_BASE_SPI + AT91_SPI_MR); + + /* Configure CS0 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(0)); + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 + /* Configure CS1 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(1)); +#endif + +#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 + /* Configure CS3 */ + writel(AT91_SPI_NCPHA | + (AT91_SPI_DLYBS & DATAFLASH_TCSS) | + (AT91_SPI_DLYBCT & DATAFLASH_TCHS) | + ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), + AT91_BASE_SPI + AT91_SPI_CSR(3)); +#endif + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); + + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_SPIENS)); + + /* + * Add tempo to get SPI in a safe state. + * Should not be needed for new silicon (Rev B) + */ + udelay(500000); + readl(AT91_BASE_SPI + AT91_SPI_SR); + readl(AT91_BASE_SPI + AT91_SPI_RDR); + +} + +void AT91F_SpiEnable(int cs) +{ + unsigned long mode; + + switch (cs) { + case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS0_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 1: /* Configure SPI CS1 for Serial DataFlash AT45DBxx */ + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS1_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + case 3: + mode = readl(AT91_BASE_SPI + AT91_SPI_MR); + mode &= 0xFFF0FFFF; + writel(mode | ((AT91_SPI_PCS3_DATAFLASH_CARD<<16) & AT91_SPI_PCS), + AT91_BASE_SPI + AT91_SPI_MR); + break; + } + + /* SPI_Enable */ + writel(AT91_SPI_SPIEN, AT91_BASE_SPI + AT91_SPI_CR); +} + +unsigned int AT91F_SpiWrite1(AT91PS_DataflashDesc pDesc); + +unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) +{ + unsigned int timeout; + + pDesc->state = BUSY; + + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + + /* Initialize the Transmit and Receive Pointer */ + writel((unsigned int)pDesc->rx_cmd_pt, AT91_BASE_SPI + AT91_SPI_RPR); + writel((unsigned int)pDesc->tx_cmd_pt, AT91_BASE_SPI + AT91_SPI_TPR); + + /* Intialize the Transmit and Receive Counters */ + writel(pDesc->rx_cmd_size, AT91_BASE_SPI + AT91_SPI_RCR); + writel(pDesc->tx_cmd_size, AT91_BASE_SPI + AT91_SPI_TCR); + + if (pDesc->tx_data_size != 0) { + /* Initialize the Next Transmit and Next Receive Pointer */ + writel((unsigned int)pDesc->rx_data_pt, AT91_BASE_SPI + AT91_SPI_RNPR); + writel((unsigned int)pDesc->tx_data_pt, AT91_BASE_SPI + AT91_SPI_TNPR); + + /* Intialize the Next Transmit and Next Receive Counters */ + writel(pDesc->rx_data_size, AT91_BASE_SPI + AT91_SPI_RNCR); + writel(pDesc->tx_data_size, AT91_BASE_SPI + AT91_SPI_TNCR); + } + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + timeout = 0; + + writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); + while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && + ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); + writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); + pDesc->state = IDLE; + + if (timeout >= CFG_SPI_WRITE_TOUT) { + printf("Error Timeout\n\r"); + return DATAFLASH_ERROR; + } + + return DATAFLASH_OK; +} diff --git a/cpu/arm926ejs/at91cap9/timer.c b/cpu/arm926ejs/at91sam9/timer.c index 4110e15b5cc..4e794662865 100644 --- a/cpu/arm926ejs/at91cap9/timer.c +++ b/cpu/arm926ejs/at91sam9/timer.c @@ -24,36 +24,35 @@ #include <common.h> #include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/io.h> /* - * We're using the AT91CAP9 PITC in 32 bit mode, by + * We're using the AT91CAP9/SAM9 PITC in 32 bit mode, by * setting the 20 bit counter period to its maximum (0xfffff). */ #define TIMER_LOAD_VAL 0xfffff -#define READ_RESET_TIMER (AT91C_BASE_PITC->PITC_PIVR) -#define READ_TIMER (AT91C_BASE_PITC->PITC_PIIR) +#define READ_RESET_TIMER at91_sys_read(AT91_PIT_PIVR) +#define READ_TIMER at91_sys_read(AT91_PIT_PIIR) #define TIMER_FREQ (AT91C_MASTER_CLOCK << 4) #define TICKS_TO_USEC(ticks) ((ticks) / 6) ulong get_timer_masked(void); ulong resettime; -AT91PS_PITC p_pitc; - /* nothing really to do with interrupts, just starts up a counter. */ -int interrupt_init(void) +int timer_init(void) { /* * Enable PITC Clock * The clock is already enabled for system controller in boot */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SYS; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); /* Enable PITC */ - AT91C_BASE_PITC->PITC_PIMR = AT91C_PITC_PITEN; - - /* Load PITC_PIMR with the right timer value */ - AT91C_BASE_PITC->PITC_PIMR |= TIMER_LOAD_VAL; + at91_sys_write(AT91_PIT_MR, TIMER_LOAD_VAL | AT91_PIT_PITEN); reset_timer_masked(); @@ -67,6 +66,7 @@ int interrupt_init(void) static inline ulong get_timer_raw(void) { ulong now = READ_TIMER; + if (now >= resettime) return now - resettime; else @@ -129,20 +129,20 @@ unsigned long long get_ticks(void) ulong get_tbclk(void) { ulong tbclk; + tbclk = CFG_HZ; return tbclk; } /* - * Reset the cpu by setting up the watchdog timer and let him time out - * on the AT91CAP9ADK board + * Reset the cpu by setting up the watchdog timer and let him time out. */ void reset_cpu(ulong ignored) { /* this is the way Linux does it */ - AT91C_BASE_RSTC->RSTC_RCR = (0xA5 << 24) | - AT91C_RSTC_PROCRST | - AT91C_RSTC_PERRST; + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | + AT91_RSTC_PROCRST | + AT91_RSTC_PERRST); while (1); /* Never reached */ diff --git a/cpu/arm926ejs/at91cap9/usb.c b/cpu/arm926ejs/at91sam9/usb.c index 69da5f3a92c..d678897dc71 100644 --- a/cpu/arm926ejs/at91cap9/usb.c +++ b/cpu/arm926ejs/at91sam9/usb.c @@ -24,15 +24,16 @@ #include <common.h> #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) -#ifdef CONFIG_AT91CAP9 #include <asm/arch/hardware.h> +#include <asm/arch/io.h> +#include <asm/arch/at91_pmc.h> int usb_cpu_init(void) { /* Enable USB host clock. */ - AT91C_BASE_PMC->PMC_SCER = AT91C_PMC_UHP; - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_UHP; + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP); return 0; } @@ -40,8 +41,8 @@ int usb_cpu_init(void) int usb_cpu_stop(void) { /* Disable USB host clock. */ - AT91C_BASE_PMC->PMC_PCDR = 1 << AT91C_ID_UHP; - AT91C_BASE_PMC->PMC_SCDR = AT91C_PMC_UHP; + at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP); + at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP); return 0; } @@ -50,5 +51,4 @@ int usb_cpu_init_fail(void) return usb_cpu_stop(); } -#endif /* CONFIG_AT91CAP9 */ #endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ diff --git a/cpu/arm926ejs/interrupts.c b/cpu/arm926ejs/interrupts.c index 0971fea8143..1819f6b0787 100644 --- a/cpu/arm926ejs/interrupts.c +++ b/cpu/arm926ejs/interrupts.c @@ -38,7 +38,7 @@ #include <common.h> #include <arm926ejs.h> -#if defined(CONFIG_INTEGRATOR) || defined(CONFIG_AT91CAP9ADK) +#ifdef CONFIG_INTEGRATOR /* Timer functionality supplied by Integrator board (AP or CP) */ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 952e9198437..ff932a1b6bf 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -23,17 +23,17 @@ include $(TOPDIR)/config.mk -LIB := $(obj)libmtd.a +LIB := $(obj)libmtd.a COBJS-y += at45.o COBJS-y += cfi_flash.o -COBJS-y += dataflash.o +COBJS-$(CONFIG_HAS_DATAFLASH) += dataflash.o COBJS-y += mw_eeprom.o COBJS-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o COBJS := $(COBJS-y) -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) all: $(LIB) diff --git a/drivers/mtd/dataflash.c b/drivers/mtd/dataflash.c index 36c99a04995..d8f78f20a8a 100644 --- a/drivers/mtd/dataflash.c +++ b/drivers/mtd/dataflash.c @@ -19,7 +19,6 @@ */ #include <common.h> #include <config.h> -#ifdef CONFIG_HAS_DATAFLASH #include <asm/hardware.h> #include <dataflash.h> @@ -31,7 +30,7 @@ struct dataflash_addr { int cs; }; -#ifdef CONFIG_AT91SAM9260EK +#if defined(CONFIG_AT91SAM9260EK) struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ {CFG_DATAFLASH_LOGIC_ADDR_CS1, 1} @@ -48,51 +47,13 @@ struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { #endif /*define the area offsets*/ -#if defined(CONFIG_AT91SAM9261EK) || defined(CONFIG_AT91SAM9260EK) || \ - defined(CONFIG_AT91SAM9263EK) || defined(CONFIG_AT91CAP9ADK) -#if defined(CONFIG_NEW_PARTITION) dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x00003FFF, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment */ - {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x0003DE00, 0x00041FFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "MON"}, /* Room for alternative boot monitor */ - {0x00042000, 0x0018BFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x0003DDFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x0003DE00, 0x0023DE3F, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x0023DE40, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, }; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x3fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x4000, 0x7fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x8000, 0x37fff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x38000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif -#elif defined(CONFIG_NEW_PARTITION) -/*define the area offsets*/ -/* Invalid partitions should be defined with start > end */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA*CFG_MAX_DATAFLASH_BANKS] = { - {0x00000000, 0x000083ff, FLAG_PROTECT_SET, 0, "Bootstrap"}, /* ROM code */ - {0x00008400, 0x00020fff, FLAG_PROTECT_SET, 0, "U-Boot"}, /* u-boot code */ - {0x00021000, 0x000293ff, FLAG_PROTECT_CLEAR, 0, "Environment"}, /* u-boot environment 8Kb */ - {0x00029400, 0x00041fff, FLAG_PROTECT_INVALID, 0, "<Unused>"}, /* Rest of Sector 1 */ - {0x00042000, 0x0018Bfff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "OS"}, /* data area size to tune */ - {0x0018C000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "FS"}, /* data area size to tune */ - - {0x00000000, 0xffffffff, FLAG_PROTECT_CLEAR, FLAG_SETENV, "Data"}, /* data area */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ - {0xffffffff, 0x00000000, FLAG_PROTECT_INVALID, 0, "<Invalid>"}, /* Invalid */ -}; -#else -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0, 0x7fff, FLAG_PROTECT_SET}, /* ROM code */ - {0x8000, 0x1ffff, FLAG_PROTECT_SET}, /* u-boot code */ - {0x20000, 0x27fff, FLAG_PROTECT_CLEAR}, /* u-boot environment */ - {0x28000, 0x1fffff, FLAG_PROTECT_CLEAR}, /* data area size to tune */ -}; -#endif extern void AT91F_SpiInit (void); extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc); @@ -108,7 +69,7 @@ int AT91F_DataflashInit (void) { int i, j; int dfcode; - int part = 0; + int part; int last_part; int found[CFG_MAX_DATAFLASH_BANKS]; unsigned char protected; @@ -181,7 +142,8 @@ int AT91F_DataflashInit (void) (dataflash_info[i].Device.pages_number * dataflash_info[i].Device.pages_size)-1; - last_part=0; + part = 0; + last_part = 0; /* set the area addresses */ for(j = 0; j<NB_DATAFLASH_AREA; j++) { if(found[i]!=0) { @@ -224,6 +186,7 @@ int AT91F_DataflashSetEnv (void) unsigned char env; unsigned char s[32]; /* Will fit a long int in hex */ unsigned long start; + for (i = 0, part= 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { for(j = 0; j<NB_DATAFLASH_AREA; j++) { env = area_list[part].setenv; @@ -297,9 +260,8 @@ void dataflash_print_info (void) } } - /*---------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashSelect */ +/* Function Name : AT91F_DataflashSelect */ /* Object : Select the correct device */ /*---------------------------------------------------------------------------*/ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, @@ -326,7 +288,7 @@ AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash, } /*---------------------------------------------------------------------------*/ -/* Function Name : addr_dataflash */ +/* Function Name : addr_dataflash */ /* Object : Test if address is valid */ /*---------------------------------------------------------------------------*/ int addr_dataflash (unsigned long addr) @@ -344,8 +306,9 @@ int addr_dataflash (unsigned long addr) return addr_valid; } + /*---------------------------------------------------------------------------*/ -/* Function Name : size_dataflash */ +/* Function Name : size_dataflash */ /* Object : Test if address is valid regarding the size */ /*---------------------------------------------------------------------------*/ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, @@ -361,13 +324,15 @@ int size_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr, return 1; } + /*---------------------------------------------------------------------------*/ -/* Function Name : prot_dataflash */ +/* Function Name : prot_dataflash */ /* Object : Test if destination area is protected */ /*---------------------------------------------------------------------------*/ int prot_dataflash (AT91PS_DataFlash pdataFlash, unsigned long addr) { -int area; + int area; + /* find area */ for (area=0; area < NB_DATAFLASH_AREA; area++) { if ((addr >= pdataFlash->pDevice->area_list[area].start) && @@ -385,6 +350,7 @@ int area; return 1; } + /*--------------------------------------------------------------------------*/ /* Function Name : dataflash_real_protect */ /* Object : protect/unprotect area */ @@ -392,7 +358,8 @@ int area; int dataflash_real_protect (int flag, unsigned long start_addr, unsigned long end_addr) { -int i,j, area1, area2, addr_valid = 0; + int i,j, area1, area2, addr_valid = 0; + /* find dataflash */ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { if ((((int) start_addr) & 0xF0000000) == @@ -435,7 +402,7 @@ int i,j, area1, area2, addr_valid = 0; } /*---------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ +/* Function Name : read_dataflash */ /* Object : dataflash memory read */ /*---------------------------------------------------------------------------*/ int read_dataflash (unsigned long addr, unsigned long size, char *result) @@ -454,9 +421,8 @@ int read_dataflash (unsigned long addr, unsigned long size, char *result) return (AT91F_DataFlashRead (pFlash, AddrToRead, size, result)); } - /*---------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ +/* Function Name : write_dataflash */ /* Object : write a block in dataflash */ /*---------------------------------------------------------------------------*/ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, @@ -483,7 +449,6 @@ int write_dataflash (unsigned long addr_dest, unsigned long addr_src, AddrToWrite, size); } - void dataflash_perror (int err) { switch (err) { @@ -509,5 +474,3 @@ void dataflash_perror (int err) break; } } - -#endif diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 9c98338f746..703784ee0dc 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -417,13 +417,13 @@ static int macb_init(struct eth_device *netdev, bd_t *bd) /* choose RMII or MII mode. This depends on the board */ #ifdef CONFIG_RMII -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, 0); #endif #else -#ifdef CONFIG_AT91CAP9ADK +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) macb_writel(macb, USRIO, MACB_BIT(CLKEN)); #else macb_writel(macb, USRIO, MACB_BIT(MII)); diff --git a/include/asm-arm/arch-at91cap9/AT91CAP9.h b/include/asm-arm/arch-at91cap9/AT91CAP9.h deleted file mode 100644 index 02ef9a85929..00000000000 --- a/include/asm-arm/arch-at91cap9/AT91CAP9.h +++ /dev/null @@ -1,518 +0,0 @@ -/* - * (C) Copyright 2008 - * AT91CAP9 definitions - * Author : ATMEL AT91 application group - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef AT91CAP9_H -#define AT91CAP9_H - -typedef volatile unsigned int AT91_REG; - -/* Static Memory Controller */ -typedef struct _AT91S_SMC { - AT91_REG SMC_SETUP0; /* Setup Register for CS 0 */ - AT91_REG SMC_PULSE0; /* Pulse Register for CS 0 */ - AT91_REG SMC_CYCLE0; /* Cycle Register for CS 0 */ - AT91_REG SMC_CTRL0; /* Control Register for CS 0 */ - AT91_REG SMC_SETUP1; /* Setup Register for CS 1 */ - AT91_REG SMC_PULSE1; /* Pulse Register for CS 1 */ - AT91_REG SMC_CYCLE1; /* Cycle Register for CS 1 */ - AT91_REG SMC_CTRL1; /* Control Register for CS 1 */ - AT91_REG SMC_SETUP2; /* Setup Register for CS 2 */ - AT91_REG SMC_PULSE2; /* Pulse Register for CS 2 */ - AT91_REG SMC_CYCLE2; /* Cycle Register for CS 2 */ - AT91_REG SMC_CTRL2; /* Control Register for CS 2 */ - AT91_REG SMC_SETUP3; /* Setup Register for CS 3 */ - AT91_REG SMC_PULSE3; /* Pulse Register for CS 3 */ - AT91_REG SMC_CYCLE3; /* Cycle Register for CS 3 */ - AT91_REG SMC_CTRL3; /* Control Register for CS 3 */ - AT91_REG SMC_SETUP4; /* Setup Register for CS 4 */ - AT91_REG SMC_PULSE4; /* Pulse Register for CS 4 */ - AT91_REG SMC_CYCLE4; /* Cycle Register for CS 4 */ - AT91_REG SMC_CTRL4; /* Control Register for CS 4 */ - AT91_REG SMC_SETUP5; /* Setup Register for CS 5 */ - AT91_REG SMC_PULSE5; /* Pulse Register for CS 5 */ - AT91_REG SMC_CYCLE5; /* Cycle Register for CS 5 */ - AT91_REG SMC_CTRL5; /* Control Register for CS 5 */ - AT91_REG SMC_SETUP6; /* Setup Register for CS 6 */ - AT91_REG SMC_PULSE6; /* Pulse Register for CS 6 */ - AT91_REG SMC_CYCLE6; /* Cycle Register for CS 6 */ - AT91_REG SMC_CTRL6; /* Control Register for CS 6 */ - AT91_REG SMC_SETUP7; /* Setup Register for CS 7 */ - AT91_REG SMC_PULSE7; /* Pulse Register for CS 7 */ - AT91_REG SMC_CYCLE7; /* Cycle Register for CS 7 */ - AT91_REG SMC_CTRL7; /* Control Register for CS 7 */ -} AT91S_SMC, *AT91PS_SMC; - -/* SMC_SETUP : (SMC Offset: 0x0) Setup Register for CS x */ -#define AT91C_SMC_NWESETUP (0x3F << 0) /* NWE Setup Length */ -#define AT91C_SMC_NCSSETUPWR (0x3F << 8) /* NCS Setup Length for WRite */ -#define AT91C_SMC_NRDSETUP (0x3F << 16) /* NRD Setup Length */ -#define AT91C_SMC_NCSSETUPRD (0x3F << 24) /* NCS Setup Length for ReaD */ -/* SMC_PULSE : (SMC Offset: 0x4) Pulse Register for CS x */ -#define AT91C_SMC_NWEPULSE (0x7F << 0) /* NWE Pulse Length */ -#define AT91C_SMC_NCSPULSEWR (0x7F << 8) /* NCS Pulse Length for WRite */ -#define AT91C_SMC_NRDPULSE (0x7F << 16) /* NRD Pulse Length */ -#define AT91C_SMC_NCSPULSERD (0x7F << 24) /* NCS Pulse Length for ReaD */ -/* SMC_CYC : (SMC Offset: 0x8) Cycle Register for CS x */ -#define AT91C_SMC_NWECYCLE (0x1FF << 0) /* Total Write Cycle Length */ -#define AT91C_SMC_NRDCYCLE (0x1FF << 16) /* Total Read Cycle Length */ -/* SMC_CTRL : (SMC Offset: 0xc) Control Register for CS x */ -#define AT91C_SMC_READMODE (0x1 << 0) /* Read Mode */ -#define AT91C_SMC_WRITEMODE (0x1 << 1) /* Write Mode */ -#define AT91C_SMC_NWAITM (0x3 << 5) /* NWAIT Mode */ - /* External NWAIT disabled */ -#define AT91C_SMC_NWAITM_NWAIT_DISABLE (0x0 << 5) - /* External NWAIT enabled in frozen mode */ -#define AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN (0x2 << 5) - /* External NWAIT enabled in ready mode */ -#define AT91C_SMC_NWAITM_NWAIT_ENABLE_READY (0x3 << 5) -#define AT91C_SMC_BAT (0x1 << 8) /* Byte Access Type */ - /* - * Write controled by ncs, nbs0, nbs1, nbs2, nbs3. - * Read controled by ncs, nrd, nbs0, nbs1, nbs2, nbs3. - */ -#define AT91C_SMC_BAT_BYTE_SELECT (0x0 << 8) - /* - * Write controled by ncs, nwe0, nwe1, nwe2, nwe3. - * Read controled by ncs and nrd. - */ -#define AT91C_SMC_BAT_BYTE_WRITE (0x1 << 8) -#define AT91C_SMC_DBW (0x3 << 12) /* Data Bus Width */ -#define AT91C_SMC_DBW_WIDTH_EIGTH_BITS (0x0 << 12) -#define AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS (0x1 << 12) -#define AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS (0x2 << 12) -#define AT91C_SMC_TDF (0xF << 16) /* Data Float Time */ -#define AT91C_SMC_TDFEN (0x1 << 20) /* TDF Enabled */ -#define AT91C_SMC_PMEN (0x1 << 24) /* Page Mode Enabled */ -#define AT91C_SMC_PS (0x3 << 28) /* Page Size */ -#define AT91C_SMC_PS_SIZE_FOUR_BYTES (0x0 << 28) -#define AT91C_SMC_PS_SIZE_EIGHT_BYTES (0x1 << 28) -#define AT91C_SMC_PS_SIZE_SIXTEEN_BYTES (0x2 << 28) -#define AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES (0x3 << 28) -/* SMC_SETUP : (SMC Offset: 0x10) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x14) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x18) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x1c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x20) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x24) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x28) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x2c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x30) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x34) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x38) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x3c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x40) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x44) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x48) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x4c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x50) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x54) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x58) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x5c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x60) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x64) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x */ -/* SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x */ -/* SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x */ -/* SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x */ -/* SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x */ - -/* AHB CCFG */ -typedef struct _AT91S_CCFG { - AT91_REG Reserved0[1]; - AT91_REG CCFG_MPBS0; /* MPB Slave 0 */ - AT91_REG CCFG_UDPHS; /* AHB Periphs */ - AT91_REG CCFG_MPBS1; /* MPB Slave 1 */ - AT91_REG CCFG_EBICSA; /* EBI Chip Select Assignement */ - AT91_REG Reserved1[2]; - AT91_REG CCFG_MPBS2; /* MPB Slave 2 */ - AT91_REG CCFG_MPBS3; /* MPB Slave 3 */ - AT91_REG CCFG_BRIDGE; /* APB Bridge */ - AT91_REG Reserved2[49]; - AT91_REG CCFG_MATRIXVERSION;/* Version */ -} AT91S_CCFG, *AT91PS_CCFG; - -/* CCFG_UDPHS : (CCFG Offset: 0x8) UDPHS Configuration */ -#define AT91C_CCFG_UDPHS_UDP_SELECT (0x1 << 31) /* UDPHS or UDP */ -#define AT91C_CCFG_UDPHS_UDP_SELECT_UDPHS (0x0 << 31) -#define AT91C_CCFG_UDPHS_UDP_SELECT_UDP (0x1 << 31) -/* CCFG_EBICSA : (CCFG Offset: 0x10) EBI Chip Select Assignement Register */ -#define AT91C_EBI_CS1A (0x1 << 1) /* CS1 Assignment */ -#define AT91C_EBI_CS1A_SMC (0x0 << 1) -#define AT91C_EBI_CS1A_BCRAMC (0x1 << 1) -#define AT91C_EBI_CS3A (0x1 << 3) /* CS 3 Assignment */ -#define AT91C_EBI_CS3A_SMC (0x0 << 3) -#define AT91C_EBI_CS3A_SM (0x1 << 3) -#define AT91C_EBI_CS4A (0x1 << 4) /* CS4 Assignment */ -#define AT91C_EBI_CS4A_SMC (0x0 << 4) -#define AT91C_EBI_CS4A_CF (0x1 << 4) -#define AT91C_EBI_CS5A (0x1 << 5) /* CS 5 Assignment */ -#define AT91C_EBI_CS5A_SMC (0x0 << 5) -#define AT91C_EBI_CS5A_CF (0x1 << 5) -#define AT91C_EBI_DBPUC (0x1 << 8) /* Data Bus Pull-up */ -#define AT91C_EBI_DDRPUC (0x1 << 9) /* DDDR DQS Pull-up */ -#define AT91C_EBI_SUP (0x1 << 16) /* EBI Supply */ -#define AT91C_EBI_SUP_1V8 (0x0 << 16) -#define AT91C_EBI_SUP_3V3 (0x1 << 16) -#define AT91C_EBI_LP (0x1 << 17) /* EBI Low Power */ -#define AT91C_EBI_LP_LOW_DRIVE (0x0 << 17) -#define AT91C_EBI_LP_STD_DRIVE (0x1 << 17) -#define AT91C_CCFG_DDR_SDR_SELECT (0x1 << 31) /* DDR or SDR */ -#define AT91C_CCFG_DDR_SDR_SELECT_DDR (0x0 << 31) -#define AT91C_CCFG_DDR_SDR_SELECT_SDR (0x1 << 31) -/* CCFG_BRIDGE : (CCFG Offset: 0x24) BRIDGE Configuration */ -#define AT91C_CCFG_AES_TDES_SELECT (0x1 << 31) /* AES or TDES */ -#define AT91C_CCFG_AES_TDES_SELECT_AES (0x0 << 31) -#define AT91C_CCFG_AES_TDES_SELECT_TDES (0x1 << 31) - -/* PIO controller */ -typedef struct _AT91S_PIO { - AT91_REG PIO_PER; /* PIO Enable Register */ - AT91_REG PIO_PDR; /* PIO Disable Register */ - AT91_REG PIO_PSR; /* PIO Status Register */ - AT91_REG Reserved0[1]; - AT91_REG PIO_OER; /* Output Enable Register */ - AT91_REG PIO_ODR; /* Output Disable Register */ - AT91_REG PIO_OSR; /* Output Status Register */ - AT91_REG Reserved1[1]; - AT91_REG PIO_IFER; /* Input Filter Enable Register */ - AT91_REG PIO_IFDR; /* Input Filter Disable Register */ - AT91_REG PIO_IFSR; /* Input Filter Status Register */ - AT91_REG Reserved2[1]; - AT91_REG PIO_SODR; /* Set Output Data Register */ - AT91_REG PIO_CODR; /* Clear Output Data Register */ - AT91_REG PIO_ODSR; /* Output Data Status Register */ - AT91_REG PIO_PDSR; /* Pin Data Status Register */ - AT91_REG PIO_IER; /* Interrupt Enable Register */ - AT91_REG PIO_IDR; /* Interrupt Disable Register */ - AT91_REG PIO_IMR; /* Interrupt Mask Register */ - AT91_REG PIO_ISR; /* Interrupt Status Register */ - AT91_REG PIO_MDER; /* Multi-driver Enable Register */ - AT91_REG PIO_MDDR; /* Multi-driver Disable Register */ - AT91_REG PIO_MDSR; /* Multi-driver Status Register */ - AT91_REG Reserved3[1]; - AT91_REG PIO_PPUDR; /* Pull-up Disable Register */ - AT91_REG PIO_PPUER; /* Pull-up Enable Register */ - AT91_REG PIO_PPUSR; /* Pull-up Status Register */ - AT91_REG Reserved4[1]; - AT91_REG PIO_ASR; /* Select A Register */ - AT91_REG PIO_BSR; /* Select B Register */ - AT91_REG PIO_ABSR; /* AB Select Status Register */ - AT91_REG Reserved5[9]; - AT91_REG PIO_OWER; /* Output Write Enable Register */ - AT91_REG PIO_OWDR; /* Output Write Disable Register */ - AT91_REG PIO_OWSR; /* Output Write Status Register */ -} AT91S_PIO, *AT91PS_PIO; - -/* Power Management Controller */ -typedef struct _AT91S_PMC { - AT91_REG PMC_SCER; /* System Clock Enable Register */ - AT91_REG PMC_SCDR; /* System Clock Disable Register */ - AT91_REG PMC_SCSR; /* System Clock Status Register */ - AT91_REG Reserved0[1]; - AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */ - AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */ - AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */ - AT91_REG PMC_UCKR; /* UTMI Clock Configuration Register */ - AT91_REG PMC_MOR; /* Main Oscillator Register */ - AT91_REG PMC_MCFR; /* Main Clock Frequency Register */ - AT91_REG PMC_PLLAR; /* PLL A Register */ - AT91_REG PMC_PLLBR; /* PLL B Register */ - AT91_REG PMC_MCKR; /* Master Clock Register */ - AT91_REG Reserved1[3]; - AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */ - AT91_REG PMC_IER; /* Interrupt Enable Register */ - AT91_REG PMC_IDR; /* Interrupt Disable Register */ - AT91_REG PMC_SR; /* Status Register */ - AT91_REG PMC_IMR; /* Interrupt Mask Register */ -} AT91S_PMC, *AT91PS_PMC; - -/* PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register */ -#define AT91C_PMC_PCK (0x1 << 0) /* Processor Clock */ -#define AT91C_PMC_OTG (0x1 << 5) /* USB OTG Clock */ -#define AT91C_PMC_UHP (0x1 << 6) /* USB Host Port Clock */ -#define AT91C_PMC_UDP (0x1 << 7) /* USB Device Port Clock */ -#define AT91C_PMC_PCK0 (0x1 << 8) /* Programmable Clock Output */ -#define AT91C_PMC_PCK1 (0x1 << 9) /* Programmable Clock Output */ -#define AT91C_PMC_PCK2 (0x1 << 10) /* Programmable Clock Output */ -#define AT91C_PMC_PCK3 (0x1 << 11) /* Programmable Clock Output */ -/* PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register */ -/* PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register */ -/* CKGR_UCKR : (PMC Offset: 0x1c) UTMI Clock Configuration Register */ -/* CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register */ -/* CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register */ -/* CKGR_PLLAR : (PMC Offset: 0x28) PLL A Register */ -/* CKGR_PLLBR : (PMC Offset: 0x2c) PLL B Register */ -/* PMC_MCKR : (PMC Offset: 0x30) Master Clock Register */ -#define AT91C_PMC_CSS (0x3 << 0) /* Clock Selection */ -#define AT91C_PMC_CSS_SLOW_CLK (0x0 << 0) /* Slow Clk */ -#define AT91C_PMC_CSS_MAIN_CLK (0x1 << 0) /* Main Clk */ -#define AT91C_PMC_CSS_PLLA_CLK (0x2 << 0) /* PLL A Clk */ -#define AT91C_PMC_CSS_PLLB_CLK (0x3 << 0) /* PLL B Clk */ -#define AT91C_PMC_PRES (0x7 << 2) /* Clock Prescaler */ -#define AT91C_PMC_PRES_CLK (0x0 << 2) -#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) -#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) -#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) -#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) -#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) -#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) -#define AT91C_PMC_MDIV (0x3 << 8) /* Master Clock Division */ -#define AT91C_PMC_MDIV_1 (0x0 << 8) -#define AT91C_PMC_MDIV_2 (0x1 << 8) -#define AT91C_PMC_MDIV_4 (0x2 << 8) -/* PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register */ -/* PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register */ -#define AT91C_PMC_MOSCS (0x1 << 0) /* MOSC mask */ -#define AT91C_PMC_LOCKA (0x1 << 1) /* PLL A mask */ -#define AT91C_PMC_LOCKB (0x1 << 2) /* PLL B mask */ -#define AT91C_PMC_MCKRDY (0x1 << 3) /* Master mask */ -#define AT91C_PMC_LOCKU (0x1 << 6) /* PLL UTMI mask */ -#define AT91C_PMC_PCK0RDY (0x1 << 8) /* PCK0_RDY mask */ -#define AT91C_PMC_PCK1RDY (0x1 << 9) /* PCK1_RDY mask */ -#define AT91C_PMC_PCK2RDY (0x1 << 10) /* PCK2_RDY mask */ -#define AT91C_PMC_PCK3RDY (0x1 << 11) /* PCK3_RDY mask */ -/* PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register */ -/* PMC_SR : (PMC Offset: 0x68) PMC Status Register */ -/* PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register */ - -/* Reset controller */ -typedef struct _AT91S_RSTC { - AT91_REG RSTC_RCR; /* Reset Control Register */ - AT91_REG RSTC_RSR; /* Reset Status Register */ - AT91_REG RSTC_RMR; /* Reset Mode Register */ -} AT91S_RSTC, *AT91PS_RSTC; - -/* RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register */ -#define AT91C_RSTC_PROCRST (0x1 << 0) /* Processor Reset */ -#define AT91C_RSTC_ICERST (0x1 << 1) /* ICE Interface Reset */ -#define AT91C_RSTC_PERRST (0x1 << 2) /* Peripheral Reset */ -#define AT91C_RSTC_EXTRST (0x1 << 3) /* External Reset */ -#define AT91C_RSTC_KEY (0xFF << 24) /* Password */ -/* RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register */ -#define AT91C_RSTC_URSTS (0x1 << 0) /* User Reset Status */ -#define AT91C_RSTC_RSTTYP (0x7 << 8) /* Reset Type */ -#define AT91C_RSTC_RSTTYP_GENERAL (0x0 << 8) -#define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) -#define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) -#define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) -#define AT91C_RSTC_RSTTYP_USER (0x4 << 8) -#define AT91C_RSTC_NRSTL (0x1 << 16) /* NRST pin level */ -#define AT91C_RSTC_SRCMP (0x1 << 17) /* Software Rst in Progress. */ -/* RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register */ -#define AT91C_RSTC_URSTEN (0x1 << 0) /* User Reset Enable */ -#define AT91C_RSTC_URSTIEN (0x1 << 4) /* User Reset Int. Enable */ -#define AT91C_RSTC_ERSTL (0xF << 8) /* User Reset Enable */ - -/* Periodic Timer Controller */ -typedef struct _AT91S_PITC { - AT91_REG PITC_PIMR; /* Period Interval Mode Register */ - AT91_REG PITC_PISR; /* Period Interval Status Register */ - AT91_REG PITC_PIVR; /* Period Interval Value Register */ - AT91_REG PITC_PIIR; /* Period Interval Image Register */ -} AT91S_PITC, *AT91PS_PITC; - -/* PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register */ -#define AT91C_PITC_PIV (0xFFFFF << 0) /* Periodic Interval Value */ -#define AT91C_PITC_PITEN (0x1 << 24) /* PIT Enable */ -#define AT91C_PITC_PITIEN (0x1 << 25) /* PIT Interrupt Enable */ -/* PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register */ -#define AT91C_PITC_PITS (0x1 << 0) /* PIT Status */ -/* PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register */ -#define AT91C_PITC_CPIV (0xFFFFF << 0) /* Current Value */ -#define AT91C_PITC_PICNT (0xFFF << 20) /* Periodic Interval Counter */ -/* PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register */ - -/* Serial Paraller Interface */ -typedef struct _AT91S_SPI { - AT91_REG SPI_CR; /* Control Register */ - AT91_REG SPI_MR; /* Mode Register */ - AT91_REG SPI_RDR; /* Receive Data Register */ - AT91_REG SPI_TDR; /* Transmit Data Register */ - AT91_REG SPI_SR; /* Status Register */ - AT91_REG SPI_IER; /* Interrupt Enable Register */ - AT91_REG SPI_IDR; /* Interrupt Disable Register */ - AT91_REG SPI_IMR; /* Interrupt Mask Register */ - AT91_REG Reserved0[4]; - AT91_REG SPI_CSR[4]; /* Chip Select Register */ - AT91_REG Reserved1[48]; - AT91_REG SPI_RPR; /* Receive Pointer Register */ - AT91_REG SPI_RCR; /* Receive Counter Register */ - AT91_REG SPI_TPR; /* Transmit Pointer Register */ - AT91_REG SPI_TCR; /* Transmit Counter Register */ - AT91_REG SPI_RNPR; /* Receive Next Pointer Register */ - AT91_REG SPI_RNCR; /* Receive Next Counter Register */ - AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */ - AT91_REG SPI_TNCR; /* Transmit Next Counter Register */ - AT91_REG SPI_PTCR; /* PDC Transfer Control Register */ - AT91_REG SPI_PTSR; /* PDC Transfer Status Register */ -} AT91S_SPI, *AT91PS_SPI; - -/* SPI_CR : (SPI Offset: 0x0) SPI Control Register */ -#define AT91C_SPI_SPIEN (0x1 << 0) /* SPI Enable */ -#define AT91C_SPI_SPIDIS (0x1 << 1) /* SPI Disable */ -#define AT91C_SPI_SWRST (0x1 << 7) /* SPI Software reset */ -#define AT91C_SPI_LASTXFER (0x1 << 24) /* SPI Last Transfer */ -/* SPI_MR : (SPI Offset: 0x4) SPI Mode Register */ -#define AT91C_SPI_MSTR (0x1 << 0) /* Master/Slave Mode */ -#define AT91C_SPI_PS (0x1 << 1) /* Peripheral Select */ -#define AT91C_SPI_PS_FIXED (0x0 << 1) -#define AT91C_SPI_PS_VARIABLE (0x1 << 1) -#define AT91C_SPI_PCSDEC (0x1 << 2) /* Chip Select Decode */ -#define AT91C_SPI_FDIV (0x1 << 3) /* Clock Selection */ -#define AT91C_SPI_MODFDIS (0x1 << 4) /* Mode Fault Detection */ -#define AT91C_SPI_LLB (0x1 << 7) /* Clock Selection */ -#define AT91C_SPI_PCS (0xF << 16) /* Peripheral Chip Select */ -#define AT91C_SPI_DLYBCS (0xFF << 24) /* Delay Between Chip Selects */ -/* SPI_RDR : (SPI Offset: 0x8) Receive Data Register */ -#define AT91C_SPI_RD (0xFFFF << 0) /* Receive Data */ -#define AT91C_SPI_RPCS (0xF << 16) /* Peripheral CS Status */ -/* SPI_TDR : (SPI Offset: 0xc) Transmit Data Register */ -#define AT91C_SPI_TD (0xFFFF << 0) /* Transmit Data */ -#define AT91C_SPI_TPCS (0xF << 16) /* Peripheral CS Status */ -/* SPI_SR : (SPI Offset: 0x10) Status Register */ -#define AT91C_SPI_RDRF (0x1 << 0) /* Receive Data Register Full */ -#define AT91C_SPI_TDRE (0x1 << 1) /* Trans. Data Register Empty */ -#define AT91C_SPI_MODF (0x1 << 2) /* Mode Fault Error */ -#define AT91C_SPI_OVRES (0x1 << 3) /* Overrun Error Status */ -#define AT91C_SPI_ENDRX (0x1 << 4) /* End of Receiver Transfer */ -#define AT91C_SPI_ENDTX (0x1 << 5) /* End of Receiver Transfer */ -#define AT91C_SPI_RXBUFF (0x1 << 6) /* RXBUFF Interrupt */ -#define AT91C_SPI_TXBUFE (0x1 << 7) /* TXBUFE Interrupt */ -#define AT91C_SPI_NSSR (0x1 << 8) /* NSSR Interrupt */ -#define AT91C_SPI_TXEMPTY (0x1 << 9) /* TXEMPTY Interrupt */ -#define AT91C_SPI_SPIENS (0x1 << 16) /* Enable Status */ -/* SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register */ -/* SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register */ -/* SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register */ -/* SPI_CSR : (SPI Offset: 0x30) Chip Select Register */ -#define AT91C_SPI_CPOL (0x1 << 0) /* Clock Polarity */ -#define AT91C_SPI_NCPHA (0x1 << 1) /* Clock Phase */ -#define AT91C_SPI_CSAAT (0x1 << 3) /* CS Active After Transfer */ -#define AT91C_SPI_BITS (0xF << 4) /* Bits Per Transfer */ -#define AT91C_SPI_BITS_8 (0x0 << 4) /* 8 Bits */ -#define AT91C_SPI_BITS_9 (0x1 << 4) /* 9 Bits */ -#define AT91C_SPI_BITS_10 (0x2 << 4) /* 10 Bits */ -#define AT91C_SPI_BITS_11 (0x3 << 4) /* 11 Bits */ -#define AT91C_SPI_BITS_12 (0x4 << 4) /* 12 Bits */ -#define AT91C_SPI_BITS_13 (0x5 << 4) /* 13 Bits */ -#define AT91C_SPI_BITS_14 (0x6 << 4) /* 14 Bits */ -#define AT91C_SPI_BITS_15 (0x7 << 4) /* 15 Bits */ -#define AT91C_SPI_BITS_16 (0x8 << 4) /* 16 Bits */ -#define AT91C_SPI_SCBR (0xFF << 8) /* Serial Clock Baud Rate */ -#define AT91C_SPI_DLYBS (0xFF << 16) /* Delay Before SPCK */ -#define AT91C_SPI_DLYBCT (0xFF << 24) /* Delay Between Transfers */ -/* SPI_PTCR : PDC Transfer Control Register */ -#define AT91C_PDC_RXTEN (0x1 << 0) /* Receiver Transfer Enable */ -#define AT91C_PDC_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */ -#define AT91C_PDC_TXTEN (0x1 << 8) /* Transm. Transfer Enable */ -#define AT91C_PDC_TXTDIS (0x1 << 9) /* Transm. Transfer Disable */ - -/* PIO definitions */ -#define AT91C_PIO_PA0 (1 << 0) /* Pin Controlled by PA0 */ -#define AT91C_PA0_SPI0_MISO AT91C_PIO_PA0 -#define AT91C_PIO_PA1 (1 << 1) /* Pin Controlled by PA1 */ -#define AT91C_PA1_SPI0_MOSI AT91C_PIO_PA1 -#define AT91C_PIO_PA2 (1 << 2) /* Pin Controlled by PA2 */ -#define AT91C_PA2_SPI0_SPCK AT91C_PIO_PA2 -#define AT91C_PIO_PA3 (1 << 3) /* Pin Controlled by PA3 */ -#define AT91C_PA3_SPI0_NPCS1 AT91C_PIO_PA3 -#define AT91C_PIO_PA4 (1 << 4) /* Pin Controlled by PA4 */ -#define AT91C_PA4_SPI0_NPCS2A AT91C_PIO_PA4 -#define AT91C_PIO_PA5 (1 << 5) /* Pin Controlled by PA5 */ -#define AT91C_PA5_SPI0_NPCS0 AT91C_PIO_PA5 -#define AT91C_PIO_PA10 (1 << 10) /* Pin Controlled by PA10 */ -#define AT91C_PIO_PA11 (1 << 11) /* Pin Controlled by PA11 */ -#define AT91C_PIO_PA22 (1 << 22) /* Pin Controlled by PA22 */ -#define AT91C_PA22_TXD0 AT91C_PIO_PA22 -#define AT91C_PIO_PA23 (1 << 23) /* Pin Controlled by PA23 */ -#define AT91C_PA23_RXD0 AT91C_PIO_PA23 -#define AT91C_PIO_PA28 (1 << 28) /* Pin Controlled by PA28 */ -#define AT91C_PA28_SPI0_NPCS3A AT91C_PIO_PA28 -#define AT91C_PIO_PB21 (1 << 21) /* Pin Controlled by PB21 */ -#define AT91C_PB21_E_TXCK AT91C_PIO_PB21 -#define AT91C_PIO_PB22 (1 << 22) /* Pin Controlled by PB22 */ -#define AT91C_PB22_E_RXDV AT91C_PIO_PB22 -#define AT91C_PIO_PB23 (1 << 23) /* Pin Controlled by PB23 */ -#define AT91C_PB23_E_TX0 AT91C_PIO_PB23 -#define AT91C_PIO_PB24 (1 << 24) /* Pin Controlled by PB24 */ -#define AT91C_PB24_E_TX1 AT91C_PIO_PB24 -#define AT91C_PIO_PB25 (1 << 25) /* Pin Controlled by PB25 */ -#define AT91C_PB25_E_RX0 AT91C_PIO_PB25 -#define AT91C_PIO_PB26 (1 << 26) /* Pin Controlled by PB26 */ -#define AT91C_PB26_E_RX1 AT91C_PIO_PB26 -#define AT91C_PIO_PB27 (1 << 27) /* Pin Controlled by PB27 */ -#define AT91C_PB27_E_RXER AT91C_PIO_PB27 -#define AT91C_PIO_PB28 (1 << 28) /* Pin Controlled by PB28 */ -#define AT91C_PB28_E_TXEN AT91C_PIO_PB28 -#define AT91C_PIO_PB29 (1 << 29) /* Pin Controlled by PB29 */ -#define AT91C_PB29_E_MDC AT91C_PIO_PB29 -#define AT91C_PIO_PB30 (1 << 30) /* Pin Controlled by PB30 */ -#define AT91C_PB30_E_MDIO AT91C_PIO_PB30 -#define AT91C_PIO_PB31 (1 << 31) /* Pin Controlled by PB31 */ -#define AT91C_PIO_PC29 (1 << 29) /* Pin Controlled by PC29 */ -#define AT91C_PIO_PC30 (1 << 30) /* Pin Controlled by PC30 */ -#define AT91C_PC30_DRXD AT91C_PIO_PC30 -#define AT91C_PIO_PC31 (1 << 31) /* Pin Controlled by PC31 */ -#define AT91C_PC31_DTXD AT91C_PIO_PC31 -#define AT91C_PIO_PD0 (1 << 0) /* Pin Controlled by PD0 */ -#define AT91C_PD0_TXD1 AT91C_PIO_PD0 -#define AT91C_PD0_SPI0_NPCS2D AT91C_PIO_PD0 -#define AT91C_PIO_PD1 (1 << 1) /* Pin Controlled by PD1 */ -#define AT91C_PD1_RXD1 AT91C_PIO_PD1 -#define AT91C_PD1_SPI0_NPCS3D AT91C_PIO_PD1 -#define AT91C_PIO_PD2 (1 << 2) /* Pin Controlled by PD2 */ -#define AT91C_PD2_TXD2 AT91C_PIO_PD2 -#define AT91C_PIO_PD3 (1 << 3) /* Pin Controlled by PD3 */ -#define AT91C_PD3_RXD2 AT91C_PIO_PD3 -#define AT91C_PIO_PD15 (1 << 15) /* Pin Controlled by PD15 */ - -/* Peripheral ID */ -#define AT91C_ID_SYS 1 /* System Controller */ -#define AT91C_ID_PIOABCD 2 /* Parallel IO Controller A, B, C, D */ -#define AT91C_ID_US0 8 /* USART 0 */ -#define AT91C_ID_US1 9 /* USART 1 */ -#define AT91C_ID_US2 10 /* USART 2 */ -#define AT91C_ID_SPI0 15 /* Serial Peripheral Interface 0 */ -#define AT91C_ID_EMAC 22 /* Ethernet Mac */ -#define AT91C_ID_UHP 29 /* USB Host Port */ - -/* Base addresses */ -#define AT91C_BASE_SMC ((AT91PS_SMC) 0xFFFFE800) /* SMC */ -#define AT91C_BASE_CCFG ((AT91PS_CCFG) 0xFFFFEB10) /* CCFG */ -#define AT91C_BASE_DBGU ((unsigned long)0xFFFFEE00) /* DBGU */ -#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF200) /* PIOA */ -#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF400) /* PIOB */ -#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF600) /* PIOC */ -#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFF800) /* PIOD */ -#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* PMC */ -#define AT91C_BASE_RSTC ((AT91PS_RSTC) 0xFFFFFD00) /* RSTC */ -#define AT91C_BASE_PITC ((AT91PS_PITC) 0xFFFFFD30) /* PITC */ -#define AT91C_BASE_US0 ((unsigned long)0xFFF8C000) /* US0 */ -#define AT91C_BASE_US1 ((unsigned long)0xFFF90000) /* US1 */ -#define AT91C_BASE_US2 ((unsigned long)0xFFF94000) /* US2 */ -#define AT91C_BASE_SPI0 ((AT91PS_SPI) 0xFFFA4000) /* SPI0 */ -#define AT91C_BASE_MACB ((unsigned long)0xFFFBC000) /* MACB */ - -#endif diff --git a/include/asm-arm/arch-at91cap9/hardware.h b/include/asm-arm/arch-at91cap9/hardware.h deleted file mode 100644 index ec0a67163de..00000000000 --- a/include/asm-arm/arch-at91cap9/hardware.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * (C) Copyright 2007 - * Stelian Pop <stelian.pop <at> leadtechdesign.com> - * Lead Tech Design <www.leadtechdesign.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/sizes.h> - -#include <asm/arch/AT91CAP9.h> - -/* - * container_of - cast a member of a structure out to the containing structure - * - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - */ -#define container_of(ptr, type, member) ({ \ - const typeof(((type *)0)->member) *__mptr = (ptr); \ - (type *)((char *)__mptr - offsetof(type, member)); }) - -#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pio.h b/include/asm-arm/arch-at91sam9/at91_pio.h new file mode 100644 index 00000000000..84c3866d309 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pio.h @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-at91/at91_pio.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Parallel I/O Controller (PIO) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIO_H +#define AT91_PIO_H + +#define PIO_PER 0x00 /* Enable Register */ +#define PIO_PDR 0x04 /* Disable Register */ +#define PIO_PSR 0x08 /* Status Register */ +#define PIO_OER 0x10 /* Output Enable Register */ +#define PIO_ODR 0x14 /* Output Disable Register */ +#define PIO_OSR 0x18 /* Output Status Register */ +#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ +#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ +#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ +#define PIO_SODR 0x30 /* Set Output Data Register */ +#define PIO_CODR 0x34 /* Clear Output Data Register */ +#define PIO_ODSR 0x38 /* Output Data Status Register */ +#define PIO_PDSR 0x3c /* Pin Data Status Register */ +#define PIO_IER 0x40 /* Interrupt Enable Register */ +#define PIO_IDR 0x44 /* Interrupt Disable Register */ +#define PIO_IMR 0x48 /* Interrupt Mask Register */ +#define PIO_ISR 0x4c /* Interrupt Status Register */ +#define PIO_MDER 0x50 /* Multi-driver Enable Register */ +#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ +#define PIO_MDSR 0x58 /* Multi-driver Status Register */ +#define PIO_PUDR 0x60 /* Pull-up Disable Register */ +#define PIO_PUER 0x64 /* Pull-up Enable Register */ +#define PIO_PUSR 0x68 /* Pull-up Status Register */ +#define PIO_ASR 0x70 /* Peripheral A Select Register */ +#define PIO_BSR 0x74 /* Peripheral B Select Register */ +#define PIO_ABSR 0x78 /* AB Status Register */ +#define PIO_OWER 0xa0 /* Output Write Enable Register */ +#define PIO_OWDR 0xa4 /* Output Write Disable Register */ +#define PIO_OWSR 0xa8 /* Output Write Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pit.h b/include/asm-arm/arch-at91sam9/at91_pit.h new file mode 100644 index 00000000000..5026325a5ae --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pit.h @@ -0,0 +1,29 @@ +/* + * include/asm-arm/arch-at91/at91_pit.h + * + * Periodic Interval Timer (PIT) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PIT_H +#define AT91_PIT_H + +#define AT91_PIT_MR (AT91_PIT + 0x00) /* Mode Register */ +#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */ +#define AT91_PIT_PITEN (1 << 24) /* Timer Enabled */ +#define AT91_PIT_PIV (0xfffff) /* Periodic Interval Value */ + +#define AT91_PIT_SR (AT91_PIT + 0x04) /* Status Register */ +#define AT91_PIT_PITS (1 << 0) /* Timer Status */ + +#define AT91_PIT_PIVR (AT91_PIT + 0x08) /* Periodic Interval Value Register */ +#define AT91_PIT_PIIR (AT91_PIT + 0x0c) /* Periodic Interval Image Register */ +#define AT91_PIT_PICNT (0xfff << 20) /* Interval Counter */ +#define AT91_PIT_CPIV (0xfffff) /* Inverval Value */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_pmc.h b/include/asm-arm/arch-at91sam9/at91_pmc.h new file mode 100644 index 00000000000..52cd8e5dabc --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_pmc.h @@ -0,0 +1,99 @@ +/* + * include/asm-arm/arch-at91/at91_pmc.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Power Management Controller (PMC) - System peripherals registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_PMC_H +#define AT91_PMC_H + +#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */ +#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */ + +#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */ +#define AT91_PMC_PCK (1 << 0) /* Processor Clock */ +#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ +#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */ +#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */ +#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */ +#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */ +#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */ +#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */ +#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */ + +#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */ +#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */ +#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */ + +#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */ + +#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */ +#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */ +#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [AT91SAM926x only] */ +#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */ + +#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */ +#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */ +#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */ + +#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */ +#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */ +#define AT91_PMC_DIV (0xff << 0) /* Divider */ +#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */ +#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */ +#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */ +#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */ +#define AT91_PMC_USBDIV_1 (0 << 28) +#define AT91_PMC_USBDIV_2 (1 << 28) +#define AT91_PMC_USBDIV_4 (2 << 28) +#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */ + +#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */ +#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */ +#define AT91_PMC_CSS_SLOW (0 << 0) +#define AT91_PMC_CSS_MAIN (1 << 0) +#define AT91_PMC_CSS_PLLA (2 << 0) +#define AT91_PMC_CSS_PLLB (3 << 0) +#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ +#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_2 (1 << 2) +#define AT91_PMC_PRES_4 (2 << 2) +#define AT91_PMC_PRES_8 (3 << 2) +#define AT91_PMC_PRES_16 (4 << 2) +#define AT91_PMC_PRES_32 (5 << 2) +#define AT91_PMC_PRES_64 (6 << 2) +#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */ +#define AT91_PMC_MDIV_1 (0 << 8) +#define AT91_PMC_MDIV_2 (1 << 8) +#define AT91_PMC_MDIV_3 (2 << 8) +#define AT91_PMC_MDIV_4 (3 << 8) + +#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */ + +#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */ +#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */ +#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */ +#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */ +#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */ +#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */ +#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */ +#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */ +#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ +#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ +#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_rstc.h b/include/asm-arm/arch-at91sam9/at91_rstc.h new file mode 100644 index 00000000000..fb8d1618a23 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_rstc.h @@ -0,0 +1,38 @@ +/* + * include/asm-arm/arch-at91/at91_rstc.h + * + * Reset Controller (RSTC) - System peripherals regsters. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_RSTC_H +#define AT91_RSTC_H + +#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ +#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ +#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ +#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ + +#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ +#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ +#define AT91_RSTC_RSTTYP_GENERAL (0 << 8) +#define AT91_RSTC_RSTTYP_WAKEUP (1 << 8) +#define AT91_RSTC_RSTTYP_WATCHDOG (2 << 8) +#define AT91_RSTC_RSTTYP_SOFTWARE (3 << 8) +#define AT91_RSTC_RSTTYP_USER (4 << 8) +#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ +#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ + +#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ +#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ +#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91_spi.h b/include/asm-arm/arch-at91sam9/at91_spi.h new file mode 100644 index 00000000000..aaad92621c8 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91_spi.h @@ -0,0 +1,105 @@ +/* + * include/asm-arm/arch-at91/at91_spi.h + * + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) SAN People + * + * Serial Peripheral Interface (SPI) registers. + * Based on AT91RM9200 datasheet revision E. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91_SPI_H +#define AT91_SPI_H + +#define AT91_SPI_CR 0x00 /* Control Register */ +#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ +#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ +#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_MR 0x04 /* Mode Register */ +#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ +#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ +#define AT91_SPI_PS_FIXED (0 << 1) +#define AT91_SPI_PS_VARIABLE (1 << 1) +#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ +#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ +#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ +#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ + +#define AT91_SPI_RDR 0x08 /* Receive Data Register */ +#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ + +#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ +#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ +#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ +#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ + +#define AT91_SPI_SR 0x10 /* Status Register */ +#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ +#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ +#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ +#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ +#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ +#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ +#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ +#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ +#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ +#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ +#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ + +#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ +#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ +#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ + +#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ +#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ +#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ +#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ +#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ +#define AT91_SPI_BITS_8 (0 << 4) +#define AT91_SPI_BITS_9 (1 << 4) +#define AT91_SPI_BITS_10 (2 << 4) +#define AT91_SPI_BITS_11 (3 << 4) +#define AT91_SPI_BITS_12 (4 << 4) +#define AT91_SPI_BITS_13 (5 << 4) +#define AT91_SPI_BITS_14 (6 << 4) +#define AT91_SPI_BITS_15 (7 << 4) +#define AT91_SPI_BITS_16 (8 << 4) +#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ +#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ +#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ + +#define AT91_SPI_RPR 0x0100 /* Receive Pointer Register */ + +#define AT91_SPI_RCR 0x0104 /* Receive Counter Register */ + +#define AT91_SPI_TPR 0x0108 /* Transmit Pointer Register */ + +#define AT91_SPI_TCR 0x010c /* Transmit Counter Register */ + +#define AT91_SPI_RNPR 0x0110 /* Receive Next Pointer Register */ + +#define AT91_SPI_RNCR 0x0114 /* Receive Next Counter Register */ + +#define AT91_SPI_TNPR 0x0118 /* Transmit Next Pointer Register */ + +#define AT91_SPI_TNCR 0x011c /* Transmit Next Counter Register */ + +#define AT91_SPI_PTCR 0x0120 /* PDC Transfer Control Register */ +#define AT91_SPI_RXTEN (0x1 << 0) /* Receiver Transfer Enable */ +#define AT91_SPI_RXTDIS (0x1 << 1) /* Receiver Transfer Disable */ +#define AT91_SPI_TXTEN (0x1 << 8) /* Transmitter Transfer Enable */ +#define AT91_SPI_TXTDIS (0x1 << 9) /* Transmitter Transfer Disable */ + +#define AT91_SPI_PTSR 0x0124 /* PDC Transfer Status Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91cap9.h b/include/asm-arm/arch-at91sam9/at91cap9.h new file mode 100644 index 00000000000..e16909c641d --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91cap9.h @@ -0,0 +1,125 @@ +/* + * include/asm-arm/arch-at91/at91cap9.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2007 Atmel Corporation. + * + * Common definitions. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_H +#define AT91CAP9_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ +#define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ +#define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ +#define AT91CAP9_ID_MPB2 5 /* MP Block Peripheral 2 */ +#define AT91CAP9_ID_MPB3 6 /* MP Block Peripheral 3 */ +#define AT91CAP9_ID_MPB4 7 /* MP Block Peripheral 4 */ +#define AT91CAP9_ID_US0 8 /* USART 0 */ +#define AT91CAP9_ID_US1 9 /* USART 1 */ +#define AT91CAP9_ID_US2 10 /* USART 2 */ +#define AT91CAP9_ID_MCI0 11 /* Multimedia Card Interface 0 */ +#define AT91CAP9_ID_MCI1 12 /* Multimedia Card Interface 1 */ +#define AT91CAP9_ID_CAN 13 /* CAN */ +#define AT91CAP9_ID_TWI 14 /* Two-Wire Interface */ +#define AT91CAP9_ID_SPI0 15 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SPI1 16 /* Serial Peripheral Interface 0 */ +#define AT91CAP9_ID_SSC0 17 /* Serial Synchronous Controller 0 */ +#define AT91CAP9_ID_SSC1 18 /* Serial Synchronous Controller 1 */ +#define AT91CAP9_ID_AC97C 19 /* AC97 Controller */ +#define AT91CAP9_ID_TCB 20 /* Timer Counter 0, 1 and 2 */ +#define AT91CAP9_ID_PWMC 21 /* Pulse Width Modulation Controller */ +#define AT91CAP9_ID_EMAC 22 /* Ethernet */ +#define AT91CAP9_ID_AESTDES 23 /* Advanced Encryption Standard, Triple DES */ +#define AT91CAP9_ID_ADC 24 /* Analog-to-Digital Converter */ +#define AT91CAP9_ID_ISI 25 /* Image Sensor Interface */ +#define AT91CAP9_ID_LCDC 26 /* LCD Controller */ +#define AT91CAP9_ID_DMA 27 /* DMA Controller */ +#define AT91CAP9_ID_UDPHS 28 /* USB High Speed Device Port */ +#define AT91CAP9_ID_UHP 29 /* USB Host Port */ +#define AT91CAP9_ID_IRQ0 30 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91CAP9_ID_IRQ1 31 /* Advanced Interrupt Controller (IRQ1) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91CAP9_BASE_UDPHS 0xfff78000 +#define AT91CAP9_BASE_TCB0 0xfff7c000 +#define AT91CAP9_BASE_TC0 0xfff7c000 +#define AT91CAP9_BASE_TC1 0xfff7c040 +#define AT91CAP9_BASE_TC2 0xfff7c080 +#define AT91CAP9_BASE_MCI0 0xfff80000 +#define AT91CAP9_BASE_MCI1 0xfff84000 +#define AT91CAP9_BASE_TWI 0xfff88000 +#define AT91CAP9_BASE_US0 0xfff8c000 +#define AT91CAP9_BASE_US1 0xfff90000 +#define AT91CAP9_BASE_US2 0xfff94000 +#define AT91CAP9_BASE_SSC0 0xfff98000 +#define AT91CAP9_BASE_SSC1 0xfff9c000 +#define AT91CAP9_BASE_AC97C 0xfffa0000 +#define AT91CAP9_BASE_SPI0 0xfffa4000 +#define AT91CAP9_BASE_SPI1 0xfffa8000 +#define AT91CAP9_BASE_CAN 0xfffac000 +#define AT91CAP9_BASE_PWMC 0xfffb8000 +#define AT91CAP9_BASE_EMAC 0xfffbc000 +#define AT91CAP9_BASE_ADC 0xfffc0000 +#define AT91CAP9_BASE_ISI 0xfffc4000 +#define AT91_BASE_SYS 0xffffe200 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe200 - AT91_BASE_SYS) +#define AT91_BCRAMC (0xffffe400 - AT91_BASE_SYS) +#define AT91_DDRSDRC (0xffffe600 - AT91_BASE_SYS) +#define AT91_SMC (0xffffe800 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffeb10 - AT91_BASE_SYS) +#define AT91_DMA (0xffffec00 - AT91_BASE_SYS) +#define AT91_DBGU (0xffffee00 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOD (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91CAP9_BASE_US0 +#define AT91_USART1 AT91CAP9_BASE_US1 +#define AT91_USART2 AT91CAP9_BASE_US2 + +/* + * Internal Memory. + */ +#define AT91CAP9_SRAM_BASE 0x00100000 /* Internal SRAM base address */ +#define AT91CAP9_SRAM_SIZE (32 * SZ_1K) /* Internal SRAM size (32Kb) */ + +#define AT91CAP9_ROM_BASE 0x00400000 /* Internal ROM base address */ +#define AT91CAP9_ROM_SIZE (32 * SZ_1K) /* Internal ROM size (32Kb) */ + +#define AT91CAP9_LCDC_BASE 0x00500000 /* LCD Controller */ +#define AT91CAP9_UDPHS_BASE 0x00600000 /* USB High Speed Device Port */ +#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ + +#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91cap9_matrix.h b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h new file mode 100644 index 00000000000..a641686b6c3 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91cap9_matrix.h @@ -0,0 +1,132 @@ +/* + * include/asm-arm/arch-at91/at91cap9_matrix.h + * + * Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com> + * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> + * Copyright (C) 2006 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91CAP9 datasheet revision B (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91CAP9_MATRIX_H +#define AT91CAP9_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */ +#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */ +#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */ +#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */ +#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */ +#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */ +#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */ +#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */ +#define AT91_MATRIX_SCFG8 (AT91_MATRIX + 0x60) /* Slave Configuration Register 8 */ +#define AT91_MATRIX_SCFG9 (AT91_MATRIX + 0x64) /* Slave Configuration Register 9 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */ +#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */ +#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */ +#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */ +#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */ +#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */ +#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */ +#define AT91_MATRIX_PRAS8 (AT91_MATRIX + 0xC0) /* Priority Register A for Slave 8 */ +#define AT91_MATRIX_PRBS8 (AT91_MATRIX + 0xC4) /* Priority Register B for Slave 8 */ +#define AT91_MATRIX_PRAS9 (AT91_MATRIX + 0xC8) /* Priority Register A for Slave 9 */ +#define AT91_MATRIX_PRBS9 (AT91_MATRIX + 0xCC) /* Priority Register B for Slave 9 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ +#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ +#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */ +#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */ +#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */ +#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */ +#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB2 (1 << 2) +#define AT91_MATRIX_RCB3 (1 << 3) +#define AT91_MATRIX_RCB4 (1 << 4) +#define AT91_MATRIX_RCB5 (1 << 5) +#define AT91_MATRIX_RCB6 (1 << 6) +#define AT91_MATRIX_RCB7 (1 << 7) +#define AT91_MATRIX_RCB8 (1 << 8) +#define AT91_MATRIX_RCB9 (1 << 9) +#define AT91_MATRIX_RCB10 (1 << 10) +#define AT91_MATRIX_RCB11 (1 << 11) + +#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ +#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) +#define AT91_MATRIX_EBI_CS1A_BCRAMC (1 << 1) +#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3) +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4) +#define AT91_MATRIX_EBI_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5) +#define AT91_MATRIX_EBI_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_EBI_DQSPDC (1 << 9) /* Data Qualifier Strobe Pull-Down Configuration */ +#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16) + +#define AT91_MPBS2_SFR (AT91_MATRIX + 0x12C) /* MPBlock Slave 2 Special Function Register */ +#define AT91_MPBS3_SFR (AT91_MATRIX + 0x130) /* MPBlock Slave 3 Special Function Register */ +#define AT91_APB_SFR (AT91_MATRIX + 0x134) /* APB Bridge Special Function Register */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9260.h b/include/asm-arm/arch-at91sam9/at91sam9260.h new file mode 100644 index 00000000000..1bf45989b5f --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9260.h @@ -0,0 +1,124 @@ +/* + * include/asm-arm/arch-at91/at91sam9260.h + * + * (C) 2006 Andrew Victor + * + * Common definitions. + * Based on AT91SAM9260 datasheet revision A (Preliminary). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_H +#define AT91SAM9260_H + +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ +#define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ +#define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ +#define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ +#define AT91SAM9260_ID_ADC 5 /* Analog-to-Digital Converter */ +#define AT91SAM9260_ID_US0 6 /* USART 0 */ +#define AT91SAM9260_ID_US1 7 /* USART 1 */ +#define AT91SAM9260_ID_US2 8 /* USART 2 */ +#define AT91SAM9260_ID_MCI 9 /* Multimedia Card Interface */ +#define AT91SAM9260_ID_UDP 10 /* USB Device Port */ +#define AT91SAM9260_ID_TWI 11 /* Two-Wire Interface */ +#define AT91SAM9260_ID_SPI0 12 /* Serial Peripheral Interface 0 */ +#define AT91SAM9260_ID_SPI1 13 /* Serial Peripheral Interface 1 */ +#define AT91SAM9260_ID_SSC 14 /* Serial Synchronous Controller */ +#define AT91SAM9260_ID_TC0 17 /* Timer Counter 0 */ +#define AT91SAM9260_ID_TC1 18 /* Timer Counter 1 */ +#define AT91SAM9260_ID_TC2 19 /* Timer Counter 2 */ +#define AT91SAM9260_ID_UHP 20 /* USB Host port */ +#define AT91SAM9260_ID_EMAC 21 /* Ethernet */ +#define AT91SAM9260_ID_ISI 22 /* Image Sensor Interface */ +#define AT91SAM9260_ID_US3 23 /* USART 3 */ +#define AT91SAM9260_ID_US4 24 /* USART 4 */ +#define AT91SAM9260_ID_US5 25 /* USART 5 */ +#define AT91SAM9260_ID_TC3 26 /* Timer Counter 3 */ +#define AT91SAM9260_ID_TC4 27 /* Timer Counter 4 */ +#define AT91SAM9260_ID_TC5 28 /* Timer Counter 5 */ +#define AT91SAM9260_ID_IRQ0 29 /* Advanced Interrupt Controller (IRQ0) */ +#define AT91SAM9260_ID_IRQ1 30 /* Advanced Interrupt Controller (IRQ1) */ +#define AT91SAM9260_ID_IRQ2 31 /* Advanced Interrupt Controller (IRQ2) */ + +/* + * User Peripheral physical base addresses. + */ +#define AT91SAM9260_BASE_TCB0 0xfffa0000 +#define AT91SAM9260_BASE_TC0 0xfffa0000 +#define AT91SAM9260_BASE_TC1 0xfffa0040 +#define AT91SAM9260_BASE_TC2 0xfffa0080 +#define AT91SAM9260_BASE_UDP 0xfffa4000 +#define AT91SAM9260_BASE_MCI 0xfffa8000 +#define AT91SAM9260_BASE_TWI 0xfffac000 +#define AT91SAM9260_BASE_US0 0xfffb0000 +#define AT91SAM9260_BASE_US1 0xfffb4000 +#define AT91SAM9260_BASE_US2 0xfffb8000 +#define AT91SAM9260_BASE_SSC 0xfffbc000 +#define AT91SAM9260_BASE_ISI 0xfffc0000 +#define AT91SAM9260_BASE_EMAC 0xfffc4000 +#define AT91SAM9260_BASE_SPI0 0xfffc8000 +#define AT91SAM9260_BASE_SPI1 0xfffcc000 +#define AT91SAM9260_BASE_US3 0xfffd0000 +#define AT91SAM9260_BASE_US4 0xfffd4000 +#define AT91SAM9260_BASE_US5 0xfffd8000 +#define AT91SAM9260_BASE_TCB1 0xfffdc000 +#define AT91SAM9260_BASE_TC3 0xfffdc000 +#define AT91SAM9260_BASE_TC4 0xfffdc040 +#define AT91SAM9260_BASE_TC5 0xfffdc080 +#define AT91SAM9260_BASE_ADC 0xfffe0000 +#define AT91_BASE_SYS 0xffffe800 + +/* + * System Peripherals (offset from AT91_BASE_SYS) + */ +#define AT91_ECC (0xffffe800 - AT91_BASE_SYS) +#define AT91_SDRAMC (0xffffea00 - AT91_BASE_SYS) +#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) +#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) +#define AT91_CCFG (0xffffef10 - AT91_BASE_SYS) +#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) +#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) +#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) +#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) +#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) +#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) +#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) +#define AT91_SHDWC (0xfffffd10 - AT91_BASE_SYS) +#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) +#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) +#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) +#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) + +#define AT91_USART0 AT91SAM9260_BASE_US0 +#define AT91_USART1 AT91SAM9260_BASE_US1 +#define AT91_USART2 AT91SAM9260_BASE_US2 +#define AT91_USART3 AT91SAM9260_BASE_US3 +#define AT91_USART4 AT91SAM9260_BASE_US4 +#define AT91_USART5 AT91SAM9260_BASE_US5 + +/* + * Internal Memory. + */ +#define AT91SAM9260_ROM_BASE 0x00100000 /* Internal ROM base address */ +#define AT91SAM9260_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ + +#define AT91SAM9260_SRAM0_BASE 0x00200000 /* Internal SRAM 0 base address */ +#define AT91SAM9260_SRAM0_SIZE SZ_4K /* Internal SRAM 0 size (4Kb) */ +#define AT91SAM9260_SRAM1_BASE 0x00300000 /* Internal SRAM 1 base address */ +#define AT91SAM9260_SRAM1_SIZE SZ_4K /* Internal SRAM 1 size (4Kb) */ + +#define AT91SAM9260_UHP_BASE 0x00500000 /* USB Host controller */ + +#define AT91SAM9XE_FLASH_BASE 0x00200000 /* Internal FLASH base address */ +#define AT91SAM9XE_SRAM_BASE 0x00300000 /* Internal SRAM base address */ + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h new file mode 100644 index 00000000000..a8e9fec6c73 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam9260_matrix.h @@ -0,0 +1,78 @@ +/* + * include/asm-arm/arch-at91/at91sam9260_matrix.h + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + * Based on AT91SAM9260 datasheet revision B. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM9260_MATRIX_H +#define AT91SAM9260_MATRIX_H + +#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ +#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ +#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ +#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ +#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ +#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ +#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ +#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ +#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ +#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ +#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ +#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ +#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */ +#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ +#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ +#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ +#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ +#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ +#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ +#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ +#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ +#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ +#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ +#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ + +#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ +#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ + +#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ +#define AT91_MATRIX_CS3A_SMC (0 << 3) +#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) +#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ +#define AT91_MATRIX_CS4A_SMC (0 << 4) +#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) +#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ +#define AT91_MATRIX_CS5A_SMC (0 << 5) +#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) +#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ +#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */ +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) + +#endif diff --git a/include/asm-arm/arch-at91sam9/at91sam926x_mc.h b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h new file mode 100644 index 00000000000..041138f809d --- /dev/null +++ b/include/asm-arm/arch-at91sam9/at91sam926x_mc.h @@ -0,0 +1,140 @@ +/* + * include/asm-arm/arch-at91/at91sam926x_mc.h + * + * Memory Controllers (SMC, SDRAMC) - System peripherals registers. + * Based on AT91SAM9261 datasheet revision D. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef AT91SAM926x_MC_H +#define AT91SAM926x_MC_H + +/* SDRAM Controller (SDRAMC) registers */ +#define AT91_SDRAMC_MR (AT91_SDRAMC + 0x00) /* SDRAM Controller Mode Register */ +#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */ +#define AT91_SDRAMC_MODE_NORMAL 0 +#define AT91_SDRAMC_MODE_NOP 1 +#define AT91_SDRAMC_MODE_PRECHARGE 2 +#define AT91_SDRAMC_MODE_LMR 3 +#define AT91_SDRAMC_MODE_REFRESH 4 +#define AT91_SDRAMC_MODE_EXT_LMR 5 +#define AT91_SDRAMC_MODE_DEEP 6 + +#define AT91_SDRAMC_TR (AT91_SDRAMC + 0x04) /* SDRAM Controller Refresh Timer Register */ +#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */ + +#define AT91_SDRAMC_CR (AT91_SDRAMC + 0x08) /* SDRAM Controller Configuration Register */ +#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */ +#define AT91_SDRAMC_NC_8 (0 << 0) +#define AT91_SDRAMC_NC_9 (1 << 0) +#define AT91_SDRAMC_NC_10 (2 << 0) +#define AT91_SDRAMC_NC_11 (3 << 0) +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR_11 (0 << 2) +#define AT91_SDRAMC_NR_12 (1 << 2) +#define AT91_SDRAMC_NR_13 (2 << 2) +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB_2 (0 << 4) +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_CAS_1 (1 << 5) +#define AT91_SDRAMC_CAS_2 (2 << 5) +#define AT91_SDRAMC_CAS_3 (3 << 5) +#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */ +#define AT91_SDRAMC_DBW_32 (0 << 7) +#define AT91_SDRAMC_DBW_16 (1 << 7) +#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */ +#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */ +#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */ +#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */ +#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */ +#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */ + +#define AT91_SDRAMC_LPR (AT91_SDRAMC + 0x10) /* SDRAM Controller Low Power Register */ +#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */ +#define AT91_SDRAMC_LPCB_DISABLE 0 +#define AT91_SDRAMC_LPCB_SELF_REFRESH 1 +#define AT91_SDRAMC_LPCB_POWER_DOWN 2 +#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3 +#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */ +#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ +#define AT91_SDRAMC_DS (3 << 10) /* Drive Strenght */ +#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ +#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12) +#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12) +#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12) + +#define AT91_SDRAMC_IER (AT91_SDRAMC + 0x14) /* SDRAM Controller Interrupt Enable Register */ +#define AT91_SDRAMC_IDR (AT91_SDRAMC + 0x18) /* SDRAM Controller Interrupt Disable Register */ +#define AT91_SDRAMC_IMR (AT91_SDRAMC + 0x1C) /* SDRAM Controller Interrupt Mask Register */ +#define AT91_SDRAMC_ISR (AT91_SDRAMC + 0x20) /* SDRAM Controller Interrupt Status Register */ +#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */ + +#define AT91_SDRAMC_MDR (AT91_SDRAMC + 0x24) /* SDRAM Memory Device Register */ +#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */ +#define AT91_SDRAMC_MD_SDRAM 0 +#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1 + +/* Static Memory Controller (SMC) registers */ +#define AT91_SMC_SETUP(n) (AT91_SMC + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ +#define AT91_SMC_NWESETUP_(x) ((x) << 0) +#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ +#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) +#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ +#define AT91_SMC_NRDSETUP_(x) ((x) << 16) +#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ +#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) + +#define AT91_SMC_PULSE(n) (AT91_SMC + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ +#define AT91_SMC_NWEPULSE_(x) ((x) << 0) +#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ +#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) +#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ +#define AT91_SMC_NRDPULSE_(x) ((x) << 16) +#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ +#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) + +#define AT91_SMC_CYCLE(n) (AT91_SMC + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ +#define AT91_SMC_NWECYCLE_(x) ((x) << 0) +#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ +#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) + +#define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ +#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) +#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ +#define AT91_SMC_BAT_SELECT (0 << 8) +#define AT91_SMC_BAT_WRITE (1 << 8) +#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ +#define AT91_SMC_DBW_8 (0 << 12) +#define AT91_SMC_DBW_16 (1 << 12) +#define AT91_SMC_DBW_32 (2 << 12) +#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ +#define AT91_SMC_TDF_(x) ((x) << 16) +#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ +#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ +#define AT91_SMC_PS (3 << 28) /* Page Size */ +#define AT91_SMC_PS_4 (0 << 28) +#define AT91_SMC_PS_8 (1 << 28) +#define AT91_SMC_PS_16 (2 << 28) +#define AT91_SMC_PS_32 (3 << 28) + +#if defined(AT91_SMC1) /* The AT91SAM9263 has 2 Static Memory contollers */ +#define AT91_SMC1_SETUP(n) (AT91_SMC1 + 0x00 + ((n)*0x10)) /* Setup Register for CS n */ +#define AT91_SMC1_PULSE(n) (AT91_SMC1 + 0x04 + ((n)*0x10)) /* Pulse Register for CS n */ +#define AT91_SMC1_CYCLE(n) (AT91_SMC1 + 0x08 + ((n)*0x10)) /* Cycle Register for CS n */ +#define AT91_SMC1_MODE(n) (AT91_SMC1 + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ +#endif + +#endif diff --git a/include/asm-arm/arch-at91cap9/clk.h b/include/asm-arm/arch-at91sam9/clk.h index ca65a2a8521..86da9a6e099 100644 --- a/include/asm-arm/arch-at91cap9/clk.h +++ b/include/asm-arm/arch-at91sam9/clk.h @@ -28,12 +28,12 @@ static inline unsigned long get_macb_pclk_rate(unsigned int dev_id) { - return AT91C_MASTER_CLOCK; + return AT91_MASTER_CLOCK; } static inline unsigned long get_usart_clk_rate(unsigned int dev_id) { - return AT91C_MASTER_CLOCK; + return AT91_MASTER_CLOCK; } #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/include/asm-arm/arch-at91sam9/gpio.h b/include/asm-arm/arch-at91sam9/gpio.h new file mode 100644 index 00000000000..2500eae2a4a --- /dev/null +++ b/include/asm-arm/arch-at91sam9/gpio.h @@ -0,0 +1,366 @@ +/* + * include/asm-arm/arch-at91/gpio.h + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_AT91_GPIO_H +#define __ASM_ARCH_AT91_GPIO_H + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/at91_pio.h> + +#define PIN_BASE 32 + +#define MAX_GPIO_BANKS 5 + +/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */ + +#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0) +#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1) +#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2) +#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3) +#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4) +#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5) +#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6) +#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7) +#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8) +#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9) +#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10) +#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11) +#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12) +#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13) +#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14) +#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15) +#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16) +#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17) +#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18) +#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19) +#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20) +#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21) +#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22) +#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23) +#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24) +#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25) +#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26) +#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27) +#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28) +#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29) +#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30) +#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31) + +#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0) +#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1) +#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2) +#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3) +#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4) +#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5) +#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6) +#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7) +#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8) +#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9) +#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10) +#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11) +#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12) +#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13) +#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14) +#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15) +#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16) +#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17) +#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18) +#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19) +#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20) +#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21) +#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22) +#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23) +#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24) +#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25) +#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26) +#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27) +#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28) +#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29) +#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30) +#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31) + +#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0) +#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1) +#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2) +#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3) +#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4) +#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5) +#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6) +#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7) +#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8) +#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9) +#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10) +#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11) +#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12) +#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13) +#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14) +#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15) +#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16) +#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17) +#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18) +#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19) +#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20) +#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21) +#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22) +#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23) +#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24) +#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25) +#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26) +#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27) +#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28) +#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29) +#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30) +#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31) + +#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0) +#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1) +#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2) +#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3) +#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4) +#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5) +#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6) +#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7) +#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8) +#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9) +#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10) +#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11) +#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12) +#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13) +#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14) +#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15) +#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16) +#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17) +#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18) +#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19) +#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20) +#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21) +#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22) +#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23) +#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24) +#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25) +#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26) +#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27) +#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28) +#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29) +#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30) +#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31) + +#define AT91_PIN_PE0 (PIN_BASE + 0x80 + 0) +#define AT91_PIN_PE1 (PIN_BASE + 0x80 + 1) +#define AT91_PIN_PE2 (PIN_BASE + 0x80 + 2) +#define AT91_PIN_PE3 (PIN_BASE + 0x80 + 3) +#define AT91_PIN_PE4 (PIN_BASE + 0x80 + 4) +#define AT91_PIN_PE5 (PIN_BASE + 0x80 + 5) +#define AT91_PIN_PE6 (PIN_BASE + 0x80 + 6) +#define AT91_PIN_PE7 (PIN_BASE + 0x80 + 7) +#define AT91_PIN_PE8 (PIN_BASE + 0x80 + 8) +#define AT91_PIN_PE9 (PIN_BASE + 0x80 + 9) +#define AT91_PIN_PE10 (PIN_BASE + 0x80 + 10) +#define AT91_PIN_PE11 (PIN_BASE + 0x80 + 11) +#define AT91_PIN_PE12 (PIN_BASE + 0x80 + 12) +#define AT91_PIN_PE13 (PIN_BASE + 0x80 + 13) +#define AT91_PIN_PE14 (PIN_BASE + 0x80 + 14) +#define AT91_PIN_PE15 (PIN_BASE + 0x80 + 15) +#define AT91_PIN_PE16 (PIN_BASE + 0x80 + 16) +#define AT91_PIN_PE17 (PIN_BASE + 0x80 + 17) +#define AT91_PIN_PE18 (PIN_BASE + 0x80 + 18) +#define AT91_PIN_PE19 (PIN_BASE + 0x80 + 19) +#define AT91_PIN_PE20 (PIN_BASE + 0x80 + 20) +#define AT91_PIN_PE21 (PIN_BASE + 0x80 + 21) +#define AT91_PIN_PE22 (PIN_BASE + 0x80 + 22) +#define AT91_PIN_PE23 (PIN_BASE + 0x80 + 23) +#define AT91_PIN_PE24 (PIN_BASE + 0x80 + 24) +#define AT91_PIN_PE25 (PIN_BASE + 0x80 + 25) +#define AT91_PIN_PE26 (PIN_BASE + 0x80 + 26) +#define AT91_PIN_PE27 (PIN_BASE + 0x80 + 27) +#define AT91_PIN_PE28 (PIN_BASE + 0x80 + 28) +#define AT91_PIN_PE29 (PIN_BASE + 0x80 + 29) +#define AT91_PIN_PE30 (PIN_BASE + 0x80 + 30) +#define AT91_PIN_PE31 (PIN_BASE + 0x80 + 31) + +static unsigned long at91_pios[] = { + AT91_PIOA, + AT91_PIOB, + AT91_PIOC, +#ifdef AT91_PIOD + AT91_PIOD, +#ifdef AT91_PIOE + AT91_PIOE +#endif +#endif +}; + +static inline void *pin_to_controller(unsigned pin) +{ + pin -= PIN_BASE; + pin /= 32; + return (void *)(AT91_BASE_SYS + at91_pios[pin]); +} + +static inline unsigned pin_to_mask(unsigned pin) +{ + pin -= PIN_BASE; + return 1 << (pin % 32); +} + +/* + * mux the pin to the "GPIO" peripheral role. + */ +static inline int at91_set_GPIO_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * mux the pin to the "A" internal peripheral role. + */ +static inline int at91_set_A_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ASR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} + +/* + * mux the pin to the "B" internal peripheral role. + */ +static inline int at91_set_B_periph(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_BSR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and + * configure it for an input. + */ +static inline int at91_set_gpio_input(unsigned pin, int use_pullup) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), + * and configure it for an output. + */ +static inline int at91_set_gpio_output(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + __raw_writel(mask, pio + PIO_PER); + return 0; +} + +/* + * enable/disable the glitch filter; mostly used with IRQ handling. + */ +static inline int at91_set_deglitch(unsigned pin, int is_on) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); + return 0; +} + +/* + * enable/disable the multi-driver; This is only valid for output and + * allows the output pin to run as an open collector output. + */ +static inline int at91_set_multi_drive(unsigned pin, int is_on) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); + return 0; +} + +static inline int gpio_direction_input(unsigned pin) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + PIO_ODR); + return 0; +} + +static inline int gpio_direction_output(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!(__raw_readl(pio + PIO_PSR) & mask)) + return -EINVAL; + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + return 0; +} + +/* + * assuming the pin is muxed as a gpio output, set its value. + */ +static inline int at91_set_gpio_value(unsigned pin, int value) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + return 0; +} + +/* + * read the pin's value (works even if it's not muxed as a gpio). + */ +static inline int at91_get_gpio_value(unsigned pin) +{ + void *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + u32 pdsr; + + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} + +#endif diff --git a/include/asm-arm/arch-at91sam9/hardware.h b/include/asm-arm/arch-at91sam9/hardware.h new file mode 100644 index 00000000000..80b334f36e3 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/hardware.h @@ -0,0 +1,56 @@ +/* + * include/asm-arm/arch-at91/hardware.h + * + * Copyright (C) 2003 SAN People + * Copyright (C) 2003 ATMEL + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <asm/sizes.h> + +#if defined(CONFIG_AT91RM9200) +#include <asm/arch/at91rm9200.h> +#elif defined(CONFIG_AT91SAM9260) +#include <asm/arch/at91sam9260.h> +#define AT91_BASE_EMAC AT91SAM9260_BASE_EMAC +#define AT91_BASE_SPI AT91SAM9260_BASE_SPI0 +#define AT91_ID_UHP AT91SAM9260_ID_UHP +#define AT91_PMC_UHP AT91SAM926x_PMC_UHP +#elif defined(CONFIG_AT91SAM9261) +#include <asm/arch/at91sam9261.h> +#elif defined(CONFIG_AT91SAM9263) +#include <asm/arch/at91sam9263.h> +#elif defined(CONFIG_AT91SAM9RL) +#include <asm/arch/at91sam9rl.h> +#elif defined(CONFIG_AT91CAP9) +#include <asm/arch/at91cap9.h> +#define AT91_BASE_EMAC AT91CAP9_BASE_EMAC +#define AT91_BASE_SPI AT91CAP9_BASE_SPI0 +#define AT91_ID_UHP AT91CAP9_ID_UHP +#define AT91_PMC_UHP AT91CAP9_PMC_UHP +#elif defined(CONFIG_AT91X40) +#include <asm/arch/at91x40.h> +#else +#error "Unsupported AT91 processor" +#endif + +/* + * container_of - cast a member of a structure out to the containing structure + * + * @ptr: the pointer to the member. + * @type: the type of the container struct this is embedded in. + * @member: the name of the member within the struct. + */ +#define container_of(ptr, type, member) ({ \ + const typeof(((type *)0)->member) *__mptr = (ptr); \ + (type *)((char *)__mptr - offsetof(type, member)); }) + +#endif diff --git a/include/asm-arm/arch-at91sam9/io.h b/include/asm-arm/arch-at91sam9/io.h new file mode 100644 index 00000000000..be9e9abe569 --- /dev/null +++ b/include/asm-arm/arch-at91sam9/io.h @@ -0,0 +1,40 @@ +/* + * include/asm-arm/arch-at91/io.h + * + * Copyright (C) 2003 SAN People + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <asm/io.h> + +static inline unsigned int at91_sys_read(unsigned int reg_offset) +{ + void *addr = (void *)AT91_BASE_SYS; + + return __raw_readl(addr + reg_offset); +} + +static inline void at91_sys_write(unsigned int reg_offset, unsigned long value) +{ + void *addr = (void *)AT91_BASE_SYS; + + __raw_writel(value, addr + reg_offset); +} + +#endif diff --git a/include/asm-arm/arch-at91cap9/memory-map.h b/include/asm-arm/arch-at91sam9/memory-map.h index eee7bd6d1b2..da988224617 100644 --- a/include/asm-arm/arch-at91cap9/memory-map.h +++ b/include/asm-arm/arch-at91sam9/memory-map.h @@ -24,11 +24,11 @@ #ifndef __ASM_ARM_ARCH_MEMORYMAP_H__ #define __ASM_ARM_ARCH_MEMORYMAP_H__ -#include <asm/arch/AT91CAP9.h> +#include <asm/arch/hardware.h> -#define USART0_BASE AT91C_BASE_US0 -#define USART1_BASE AT91C_BASE_US1 -#define USART2_BASE AT91C_BASE_US2 -#define USART3_BASE AT91C_BASE_DBGU +#define USART0_BASE AT91_USART0 +#define USART1_BASE AT91_USART1 +#define USART2_BASE AT91_USART2 +#define USART3_BASE (AT91_BASE_SYS + AT91_DBGU) #endif /* __ASM_ARM_ARCH_MEMORYMAP_H__ */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index f0dfd71aef4..dab21d0c0a0 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stelian Pop <stelian.pop <at> leadtechdesign.com> * Lead Tech Design <www.leadtechdesign.com> * @@ -28,8 +28,8 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ -#define AT91C_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ +#define AT91_MAIN_CLOCK 200000000 /* from 12 MHz crystal */ +#define AT91_MASTER_CLOCK 100000000 /* peripheral = main / 2 */ #define CFG_HZ 1000000 /* 1us resolution */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ @@ -46,19 +46,9 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SKIP_RELOCATE_UBOOT -#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) -#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ - -#define CONFIG_BAUDRATE 115200 - /* * Hardware drivers */ - #define CONFIG_ATMEL_USART 1 #undef CONFIG_USART0 #undef CONFIG_USART1 @@ -104,7 +94,9 @@ #define CFG_SPI_WRITE_TOUT (5*CFG_HZ) #define CFG_MAX_DATAFLASH_BANKS 1 #define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -#define CONFIG_NEW_PARTITION 1 +#define AT91_SPI_CLK 20000000 +#define DATAFLASH_TCSS (0xFA << 16) +#define DATAFLASH_TCHS (0x8 << 24) /* NOR flash */ #define CFG_FLASH_CFI 1 @@ -114,39 +106,11 @@ #define CFG_MAX_FLASH_SECT 256 #define CFG_MAX_FLASH_BANKS 1 -#define AT91C_FLASH_NWE_SETUP (4 << 0) -#define AT91C_FLASH_NCS_WR_SETUP (2 << 8) -#define AT91C_FLASH_NRD_SETUP (4 << 16) -#define AT91C_FLASH_NCS_RD_SETUP (2 << 24) - -#define AT91C_FLASH_NWE_PULSE (8 << 0) -#define AT91C_FLASH_NCS_WR_PULSE (10 << 8) -#define AT91C_FLASH_NRD_PULSE (8 << 16) -#define AT91C_FLASH_NCS_RD_PULSE (10 << 24) - -#define AT91C_FLASH_NWE_CYCLE (16 << 0) -#define AT91C_FLASH_NRD_CYCLE (16 << 16) - /* NAND flash */ #define NAND_MAX_CHIPS 1 #define CFG_MAX_NAND_DEVICE 1 #define CFG_NAND_BASE 0x40000000 -#define AT91C_SM_NWE_SETUP (2 << 0) -#define AT91C_SM_NCS_WR_SETUP (1 << 8) -#define AT91C_SM_NRD_SETUP (2 << 16) -#define AT91C_SM_NCS_RD_SETUP (1 << 24) - -#define AT91C_SM_NWE_PULSE (4 << 0) -#define AT91C_SM_NCS_WR_PULSE (6 << 8) -#define AT91C_SM_NRD_PULSE (4 << 16) -#define AT91C_SM_NCS_RD_PULSE (6 << 24) - -#define AT91C_SM_NWE_CYCLE (8 << 0) -#define AT91C_SM_NRD_CYCLE (8 << 16) - -#define AT91C_SM_TDF (1 << 16) - /* Ethernet */ #define CONFIG_MACB 1 #define CONFIG_RMII 1 @@ -159,15 +123,14 @@ #define LITTLEENDIAN 1 #define CONFIG_DOS_PARTITION 1 #define CFG_USB_OHCI_CPU_INIT 1 -#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91C_BASE_UHP */ +#define CFG_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */ #define CFG_USB_OHCI_SLOT_NAME "at91cap9" #define CFG_USB_OHCI_MAX_ROOT_PORTS 2 - #define CFG_LOAD_ADDR 0x72000000 /* load address */ #define CFG_MEMTEST_START PHYS_SDRAM -#define CFG_MEMTEST_END 0x73000000 +#define CFG_MEMTEST_END 0x73e00000 #define CFG_USE_DATAFLASH 1 #undef CFG_USE_NORFLASH @@ -194,6 +157,7 @@ #endif +#define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } #define CFG_PROMPT "U-Boot> " @@ -203,6 +167,13 @@ #define CFG_LONGHELP 1 #define CONFIG_CMDLINE_EDITING 1 +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + #define CONFIG_STACKSIZE (32*1024) /* regular stack */ #ifdef CONFIG_USE_IRQ diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 5b7212a68f9..951ce160a45 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -51,7 +51,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h new file mode 100644 index 00000000000..96d1b8dff3a --- /dev/null +++ b/include/configs/at91sam9260ek.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop <at> leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * Configuation settings for the AT91SAM9260EK board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* ARM asynchronous clock */ +#define AT91_MAIN_CLOCK 198656000 /* from 18.432 MHz crystal */ +#define AT91_MASTER_CLOCK 99328000 /* peripheral = main / 2 */ +#define CFG_HZ 1000000 /* 1us resolution */ + +#define AT91_SLOW_CLOCK 32768 /* slow clock */ + +#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ +#define CONFIG_AT91SAM9260 1 /* It's an Atmel AT91SAM9260 SoC*/ +#define CONFIG_AT91SAM9260EK 1 /* on an AT91SAM9260EK Board */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ + "root=/dev/mtdblock0 rw rootfstype=jffs2" + +/* #define CONFIG_ENV_OVERWRITE 1 */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_AUTOSCRIPT +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */ + +/* DataFlash */ +#define CONFIG_HAS_DATAFLASH 1 +#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) +#define CFG_MAX_DATAFLASH_BANKS 2 +#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ +#define CFG_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ +#define AT91_SPI_CLK 33000000 +#define DATAFLASH_TCSS (0x1a << 16) +#define DATAFLASH_TCHS (0x1 << 24) + +/* NAND flash */ +#define NAND_MAX_CHIPS 1 +#define CFG_MAX_NAND_DEVICE 1 +#define CFG_NAND_BASE 0x40000000 + +/* NOR flash - no real flash on this board */ +#define CFG_NO_FLASH 1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_RESET_PHY_R 1 + +/* USB */ +#define CONFIG_USB_OHCI_NEW 1 +#define LITTLEENDIAN 1 +#define CONFIG_DOS_PARTITION 1 +#define CFG_USB_OHCI_CPU_INIT 1 +#define CFG_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CFG_USB_OHCI_SLOT_NAME "at91sam9260" +#define CFG_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CFG_LOAD_ADDR 0x22000000 /* load address */ + +#define CFG_MEMTEST_START PHYS_SDRAM +#define CFG_MEMTEST_END 0x23e00000 + +#undef CFG_USE_DATAFLASH_CS0 +#define CFG_USE_DATAFLASH_CS1 1 +#undef CFG_USE_NANDFLASH + +#ifdef CFG_USE_DATAFLASH_CS0 + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xC003DE00 0x22000000 0x200040; bootm" + +#elif CFG_USE_DATAFLASH_CS1 + +/* bootstrap + u-boot + env + linux in dataflash on CS1 */ +#define CFG_ENV_IS_IN_DATAFLASH 1 +#define CFG_MONITOR_BASE (CFG_DATAFLASH_LOGIC_ADDR_CS1 + 0x8400) +#define CFG_ENV_OFFSET 0x4200 +#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS1 + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x4200 +#define CONFIG_BOOTCOMMAND "cp.b 0xD003DE00 0x22000000 0x200040; bootm" + +#else /* CFG_USE_NANDFLASH */ + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x60000 +#define CFG_ENV_OFFSET_REDUND 0x80000 +#define CFG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" + +#endif + +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#define CFG_PROMPT "U-Boot> " +#define CFG_CBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#define ROUND(A, B) (((A) + (B)) & ~((B) - 1)) +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN ROUND(3 * CFG_ENV_SIZE + 128*1024, 0x1000) +#define CFG_GBL_DATA_SIZE 128 /* 128 bytes for initial data */ + +#define CONFIG_STACKSIZE (32*1024) /* regular stack */ + +#ifdef CONFIG_USE_IRQ +#error CONFIG_USE_IRQ not supported +#endif + +#endif diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index d22d3505799..bce5fcd82f5 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -50,7 +50,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */ diff --git a/include/configs/csb637.h b/include/configs/csb637.h index f93c3bcd6f3..e9c6d8e7aec 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -51,7 +51,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */ diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 294221f9416..2eb4af1554d 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -55,7 +55,7 @@ #define MC_ASR_VAL 0x00000000 #define MC_AASR_VAL 0x00000000 #define EBI_CFGR_VAL 0x00000000 -#define SMC2_CSR_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ +#define SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ /* clocks */ #define PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ diff --git a/include/dataflash.h b/include/dataflash.h index fbd5e17f44c..68f0324158c 100644 --- a/include/dataflash.h +++ b/include/dataflash.h @@ -38,11 +38,7 @@ #include "config.h" /*number of protected area*/ -#ifdef CONFIG_NEW_PARTITION -# define NB_DATAFLASH_AREA 6 -#else -# define NB_DATAFLASH_AREA 4 -#endif +#define NB_DATAFLASH_AREA 5 #ifdef CFG_NO_FLASH diff --git a/net/eth.c b/net/eth.c index 3b86f879d26..c4f24c64b63 100644 --- a/net/eth.c +++ b/net/eth.c @@ -64,7 +64,7 @@ extern int greth_initialize(bd_t *); extern int atngw100_eth_initialize(bd_t *); extern int mcffec_initialize(bd_t*); extern int mcdmafec_initialize(bd_t*); -extern int at91cap9_eth_initialize(bd_t *); +extern int at91sam9_eth_initialize(bd_t *); #ifdef CONFIG_API extern void (*push_packet)(volatile void *, int); @@ -288,8 +288,8 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_FSLDMAFEC) mcdmafec_initialize(bis); #endif -#if defined(CONFIG_AT91CAP9) - at91cap9_eth_initialize(bis); +#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) + at91sam9_eth_initialize(bis); #endif if (!eth_devices) { |