diff options
744 files changed, 5931 insertions, 5930 deletions
diff --git a/.checkpatch.conf b/.checkpatch.conf index 9e40ea060b..c368d41472 100644 --- a/.checkpatch.conf +++ b/.checkpatch.conf @@ -4,7 +4,7 @@ # Temporary for false positive in checkpatch --ignore COMPLEX_MACRO -# For CONFIG_SYS_I2C_NOPROBES +# For CFG_SYS_I2C_NOPROBES --ignore MULTISTATEMENT_MACRO_USE_DO_WHILE # For simple_strtoul @@ -264,8 +264,8 @@ config HAS_CUSTOM_SYS_INIT_SP_ADDR default y if TFABOOT help Typically, we use an initial stack pointer address that is calculated - by taking the statically defined CONFIG_SYS_INIT_RAM_ADDR, adding the - statically defined CONFIG_SYS_INIT_RAM_SIZE and then subtracting the + by taking the statically defined CFG_SYS_INIT_RAM_ADDR, adding the + statically defined CFG_SYS_INIT_RAM_SIZE and then subtracting the build-time constant of GENERATED_GBL_DATA_SIZE. On MIPS a different but statica calculation is performed. However, some platforms will take a different approach. Say Y here to define the address statically @@ -333,7 +333,7 @@ config SPL_SYS_MALLOC_F_LEN particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. - It is possible to enable CONFIG_SYS_SPL_MALLOC_START to start a new + It is possible to enable CFG_SYS_SPL_MALLOC_START to start a new malloc() region in SDRAM once it is inited. config TPL_SYS_MALLOC_F_LEN @@ -1138,10 +1138,10 @@ endif $(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\ $(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG)) $(call deprecated,CONFIG_DM_I2C,I2C drivers,v2022.04,$(CONFIG_SYS_I2C_LEGACY)) - @# CONFIG_SYS_TIMER_RATE has brackets in it for some boards which + @# CFG_SYS_TIMER_RATE has brackets in it for some boards which @# confuses this rule. Use if() to send just a single character which @# is enable to tell 'deprecated' that one of these symbols exists - $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CONFIG_SYS_TIMER_RATE)$(CONFIG_SYS_TIMER_COUNTER)),x)) + $(call deprecated,CONFIG_TIMER,Timer drivers,v2023.01,$(if $(strip $(CFG_SYS_TIMER_RATE)$(CFG_SYS_TIMER_COUNTER)),x)) $(call deprecated,CONFIG_DM_SERIAL,Serial drivers,v2023.04,$(CONFIG_SERIAL)) $(call deprecated,CONFIG_DM_SCSI,SCSI drivers,v2023.04,$(CONFIG_SCSI)) @# Check that this build does not use CONFIG options that we do not @@ -1361,8 +1361,8 @@ u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE # U-Boot entry point, needed for booting of full-blown U-Boot # from the SPL U-Boot version. # -ifndef CONFIG_SYS_UBOOT_START -CONFIG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE) +ifndef CFG_SYS_UBOOT_START +CFG_SYS_UBOOT_START := $(CONFIG_TEXT_BASE) endif # Boards with more complex image requirements can provide an .its source file @@ -1387,7 +1387,7 @@ endif ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -p $(CONFIG_FIT_EXTERNAL_OFFSET) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(DEVICE_TREE))) \ @@ -1395,10 +1395,10 @@ MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtbo,$(subst ",,$(CONFIG_OF_OVERLAY_LIST))) else MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log endif @@ -1429,7 +1429,7 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ UBOOT_BIN := u-boot.bin MKIMAGEFLAGS_u-boot-lzma.img = -A $(ARCH) -T standalone -C lzma -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" u-boot.bin.lzma: u-boot.bin FORCE @@ -341,7 +341,7 @@ The following options need to be configured: CFG_SYS_FSL_DDR_SDRAM_BASE_PHY Physical address from the view of DDR controllers. It is the - same as CONFIG_SYS_DDR_SDRAM_BASE for all Power SoCs. But + same as CFG_SYS_DDR_SDRAM_BASE for all Power SoCs. But it could be different for ARM SoCs. - MIPS CPU options: @@ -352,7 +352,7 @@ The following options need to be configured: be swapped if a flash programmer is used. - ARM options: - CONFIG_SYS_EXCEPTION_VECTORS_HIGH + CFG_SYS_EXCEPTION_VECTORS_HIGH Select high exception vectors of the ARM core, e.g., do not clear the V bit of the c1 register of CP15. @@ -415,7 +415,7 @@ The following options need to be configured: the defaults discussed just above. - Cache Configuration for ARM: - CONFIG_SYS_PL310_BASE - Physical base address of PL310 + CFG_SYS_PL310_BASE - Physical base address of PL310 controller register space - Serial Ports: @@ -485,7 +485,7 @@ The following options need to be configured: - GPIO Support: CONFIG_PCA953X - use NXP's PCA953X series I2C GPIO - The CONFIG_SYS_I2C_PCA953X_WIDTH option specifies a list of + The CFG_SYS_I2C_PCA953X_WIDTH option specifies a list of chip-ngpio pairs that tell the PCA953X driver the number of pins supported by a particular chip. @@ -927,21 +927,21 @@ The following options need to be configured: CONFIG_SYS_I2C_DIRECT_BUS define this, if you don't use i2c muxes on your hardware. - if CONFIG_SYS_I2C_MAX_HOPS is not defined or == 0 you can + if CFG_SYS_I2C_MAX_HOPS is not defined or == 0 you can omit this define. - CONFIG_SYS_I2C_MAX_HOPS + CFG_SYS_I2C_MAX_HOPS define how many muxes are maximal consecutively connected on one i2c bus. If you not use i2c muxes, omit this define. - CONFIG_SYS_I2C_BUSES + CFG_SYS_I2C_BUSES hold a list of buses you want to use, only used if CONFIG_SYS_I2C_DIRECT_BUS is not defined, for example - a board with CONFIG_SYS_I2C_MAX_HOPS = 1 and + a board with CFG_SYS_I2C_MAX_HOPS = 1 and CFG_SYS_NUM_I2C_BUSES = 9: - CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \ + CFG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 1}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 2}}}, \ {0, {{I2C_MUX_PCA9547, 0x70, 3}}}, \ @@ -1044,7 +1044,7 @@ The following options need to be configured: active. To switch to a different bus, use the 'i2c dev' command. Note that bus numbering is zero-based. - CONFIG_SYS_I2C_NOPROBES + CFG_SYS_I2C_NOPROBES This option specifies a list of I2C devices that will be skipped when the 'i2c probe' command is issued. If CONFIG_I2C_MULTI_BUS @@ -1053,16 +1053,16 @@ The following options need to be configured: e.g. #undef CONFIG_I2C_MULTI_BUS - #define CONFIG_SYS_I2C_NOPROBES {0x50,0x68} + #define CFG_SYS_I2C_NOPROBES {0x50,0x68} will skip addresses 0x50 and 0x68 on a board with one I2C bus #define CONFIG_I2C_MULTI_BUS - #define CONFIG_SYS_I2C_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} + #define CFG_SYS_I2C_NOPROBES {{0,0x50},{0,0x68},{1,0x54}} will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1 - CONFIG_SYS_RTC_BUS_NUM + CFG_SYS_RTC_BUS_NUM If defined, then this indicates the I2C bus number for the RTC. If not defined, then U-Boot assumes that RTC is on I2C bus 0. @@ -1120,19 +1120,19 @@ The following options need to be configured: configuration if the INIT_B line goes low (which indicated a CRC error). - CONFIG_SYS_FPGA_WAIT_INIT + CFG_SYS_FPGA_WAIT_INIT Maximum time to wait for the INIT_B line to de-assert after PROB_B has been de-asserted during a Virtex II FPGA configuration sequence. The default time is 500 ms. - CONFIG_SYS_FPGA_WAIT_BUSY + CFG_SYS_FPGA_WAIT_BUSY Maximum time to wait for BUSY to de-assert during Virtex II FPGA configuration. The default is 5 ms. - CONFIG_SYS_FPGA_WAIT_CONFIG + CFG_SYS_FPGA_WAIT_CONFIG Time to wait after FPGA configuration. The default is 200 ms. @@ -1429,12 +1429,12 @@ Configuration Settings: - CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to prompt for user input. -- CONFIG_SYS_BAUDRATE_TABLE: +- CFG_SYS_BAUDRATE_TABLE: List of legal baudrate settings for this board. -- CONFIG_SYS_MEM_RESERVE_SECURE +- CFG_SYS_MEM_RESERVE_SECURE Only implemented for ARMv8 for now. - If defined, the size of CONFIG_SYS_MEM_RESERVE_SECURE memory + If defined, the size of CFG_SYS_MEM_RESERVE_SECURE memory is substracted from total RAM and won't be reported to OS. This memory can be used as secure memory. A variable gd->arch.secure_ram is used to track the location. In systems @@ -1444,7 +1444,7 @@ Configuration Settings: - CFG_SYS_SDRAM_BASE: Physical start address of SDRAM. _Must_ be 0 here. -- CONFIG_SYS_FLASH_BASE: +- CFG_SYS_FLASH_BASE: Physical start address of Flash memory. - CONFIG_SYS_MALLOC_LEN: @@ -1468,16 +1468,16 @@ Configuration Settings: boards which do not use the full malloc in SPL (which is enabled with CONFIG_SYS_SPL_MALLOC). -- CONFIG_SYS_BOOTMAPSZ: +- CFG_SYS_BOOTMAPSZ: Maximum size of memory mapped by the startup code of the Linux kernel; all data that must be processed by the Linux kernel (bd_info, boot arguments, FDT blob if used) must be put below this limit, unless "bootm_low" environment variable is defined and non-zero. In such case all data for the Linux kernel must be between "bootm_low" - and "bootm_low" + CONFIG_SYS_BOOTMAPSZ. The environment + and "bootm_low" + CFG_SYS_BOOTMAPSZ. The environment variable "bootm_mapsize" will override the value of - CONFIG_SYS_BOOTMAPSZ. If CONFIG_SYS_BOOTMAPSZ is undefined, + CFG_SYS_BOOTMAPSZ. If CFG_SYS_BOOTMAPSZ is undefined, then the value in "bootm_size" will be used instead. - CONFIG_SYS_BOOT_GET_CMDLINE: @@ -1638,11 +1638,11 @@ Low Level (hardware related) configuration options: Default (power-on reset) physical address of CCSR on Freescale PowerPC SOCs. -- CONFIG_SYS_CCSRBAR: +- CFG_SYS_CCSRBAR: Virtual address of CCSR. On a 32-bit build, this is typically the same value as CONFIG_SYS_CCSRBAR_DEFAULT. -- CONFIG_SYS_CCSRBAR_PHYS: +- CFG_SYS_CCSRBAR_PHYS: Physical address of CCSR. CCSR can be relocated to a new physical address, if desired. In this case, this macro should be set to that address. Otherwise, it should be set to the @@ -1650,17 +1650,17 @@ Low Level (hardware related) configuration options: is typically relocated on 36-bit builds. It is recommended that this macro be defined via the _HIGH and _LOW macros: - #define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH - * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW) + #define CFG_SYS_CCSRBAR_PHYS ((CFG_SYS_CCSRBAR_PHYS_HIGH + * 1ull) << 32 | CFG_SYS_CCSRBAR_PHYS_LOW) -- CONFIG_SYS_CCSRBAR_PHYS_HIGH: - Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS. This value is typically +- CFG_SYS_CCSRBAR_PHYS_HIGH: + Bits 33-36 of CFG_SYS_CCSRBAR_PHYS. This value is typically either 0 (32-bit build) or 0xF (36-bit build). This macro is used in assembly code, so it must not contain typecasts or integer size suffixes (e.g. "ULL"). -- CONFIG_SYS_CCSRBAR_PHYS_LOW: - Lower 32-bits of CONFIG_SYS_CCSRBAR_PHYS. This macro is +- CFG_SYS_CCSRBAR_PHYS_LOW: + Lower 32-bits of CFG_SYS_CCSRBAR_PHYS. This macro is used in assembly code, so it must not contain typecasts or integer size suffixes (e.g. "ULL"). @@ -1668,7 +1668,7 @@ Low Level (hardware related) configuration options: DO NOT CHANGE unless you know exactly what you're doing! (11-4) [MPC8xx systems only] -- CONFIG_SYS_INIT_RAM_ADDR: +- CFG_SYS_INIT_RAM_ADDR: Start address of memory area that can be used for initial data and stack; please note that this must be @@ -2737,7 +2737,7 @@ locked as (mis-) used as memory, etc. cause you grief during the initial boot! It is frequently not used. - CONFIG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere + CFG_SYS_INIT_RAM_ADDR should be somewhere that won't interfere with your processor/board/system design. The default value you will find in any recent u-boot distribution in walnut.h should work for you. I'd set it to a value larger diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 5a1536539d..9e76a4a9e0 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -18,7 +18,7 @@ #include <linux/linkage.h> #ifndef CONFIG_SYS_PHY_UBOOT_BASE -#define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE +#define CONFIG_SYS_PHY_UBOOT_BASE CFG_SYS_UBOOT_BASE #endif /* diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index aca7793c57..c882bd39ea 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -95,7 +95,7 @@ flush_dcache: mrc p15, 0, r0, c1, c0, 0 bic r0, r0, #0x00000300 /* clear bits 9:8 (---- --RS) */ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */ -#ifdef CONFIG_SYS_EXCEPTION_VECTORS_HIGH +#ifdef CFG_SYS_EXCEPTION_VECTORS_HIGH orr r0, r0, #0x00002000 /* set bit 13 (--V- ----) */ #else bic r0, r0, #0x00002000 /* clear bit 13 (--V- ----) */ diff --git a/arch/arm/cpu/armv7/arch_timer.c b/arch/arm/cpu/armv7/arch_timer.c index d96406f762..17bd53dae8 100644 --- a/arch/arm/cpu/armv7/arch_timer.c +++ b/arch/arm/cpu/armv7/arch_timer.c @@ -14,7 +14,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_SYS_HZ_CLOCK +#ifndef CFG_SYS_HZ_CLOCK static inline u32 read_cntfrq(void) { u32 frq; @@ -29,8 +29,8 @@ int timer_init(void) gd->arch.tbl = 0; gd->arch.tbu = 0; -#ifdef CONFIG_SYS_HZ_CLOCK - gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK; +#ifdef CFG_SYS_HZ_CLOCK + gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK; #else gd->arch.timer_rate_hz = read_cntfrq(); #endif diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index d09c21d5d9..25e4b49c70 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -313,9 +313,9 @@ int cpu_eth_init(struct bd_info *bis) int arch_cpu_init(void) { - void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); void *rcpm2_base = - (void *)(CONFIG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET); + (void *)(CFG_SYS_DCSRBAR + DCSR_RCPM2_BLOCK_OFFSET); struct ccsr_scfg *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR; u32 state; diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 0e7d5fa06d..599b7e18ef 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -183,7 +183,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) off = fdt_node_offset_by_compat_reg(blob, FSL_IFC_COMPAT, - CONFIG_SYS_IFC_ADDR); + CFG_SYS_IFC_ADDR); fdt_set_node_status(blob, off, FDT_STATUS_DISABLED); #else off = fdt_node_offset_by_compat_reg(blob, FSL_QSPI_COMPAT, diff --git a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c index 954fa5f8b4..dbb0766a9c 100644 --- a/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c +++ b/arch/arm/cpu/armv7/ls102xa/ls102xa_psci.c @@ -42,7 +42,7 @@ static void __secure ls1_save_ddr_head(void) static void __secure ls1_fsm_setup(void) { - void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *dcsr_epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); void *dcsr_rcpm_base = (void *)SYS_FSL_DCSR_RCPM_ADDR; out_be32(dcsr_rcpm_base + DCSR_RCPM_CSTTACR0, 0x00001001); @@ -118,7 +118,7 @@ static void __secure ls1_delay(unsigned int loop) static void __secure ls1_start_fsm(void) { - void *dcsr_epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); + void *dcsr_epu_base = (void *)(CFG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); void *ccsr_gic_base = (void *)SYS_FSL_GIC_ADDR; struct ccsr_scfg __iomem *scfg = (void *)CFG_SYS_FSL_SCFG_ADDR; struct ccsr_ddr __iomem *ddr = (void *)CFG_SYS_FSL_DDR_ADDR; diff --git a/arch/arm/cpu/armv7/stv0991/timer.c b/arch/arm/cpu/armv7/stv0991/timer.c index 67764ccf66..f7cc45772f 100644 --- a/arch/arm/cpu/armv7/stv0991/timer.c +++ b/arch/arm/cpu/armv7/stv0991/timer.c @@ -18,7 +18,7 @@ static struct stv0991_cgu_regs *const stv0991_cgu_regs = \ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR); #define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING) -#define GPT_RESOLUTION (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) +#define GPT_RESOLUTION (CFG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) DECLARE_GLOBAL_DATA_PTR; @@ -67,7 +67,7 @@ void __udelay(unsigned long usec) { ulong tmo; ulong start = get_timer_masked(); - ulong tenudelcnt = CONFIG_SYS_HZ_CLOCK / (1000 * 100); + ulong tenudelcnt = CFG_SYS_HZ_CLOCK / (1000 * 100); ulong rndoff; rndoff = (usec % 10) ? 1 : 0; diff --git a/arch/arm/cpu/armv7m/systick-timer.c b/arch/arm/cpu/armv7m/systick-timer.c index 556eaf8c74..c30af4ff7a 100644 --- a/arch/arm/cpu/armv7m/systick-timer.c +++ b/arch/arm/cpu/armv7m/systick-timer.c @@ -18,7 +18,7 @@ * The number of reference clock ticks that correspond to 10ms is normally * defined in the SysTick Calibration register's TENMS field. However, on some * devices this is wrong, so this driver allows the clock rate to be defined - * using CONFIG_SYS_HZ_CLOCK. + * using CFG_SYS_HZ_CLOCK. */ #include <common.h> @@ -76,10 +76,10 @@ int timer_init(void) /* * If the TENMS field is inexact or wrong, specify the clock rate using - * CONFIG_SYS_HZ_CLOCK. + * CFG_SYS_HZ_CLOCK. */ -#if defined(CONFIG_SYS_HZ_CLOCK) - gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK; +#if defined(CFG_SYS_HZ_CLOCK) + gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK; #else gd->arch.timer_rate_hz = (cal & SYSTICK_CAL_TENMS_MASK) * 100; #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index bbaa91f0e1..99413ef52e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -114,7 +114,7 @@ static struct mm_region early_map[] = { CONFIG_SYS_FSL_IFC_SIZE1 - CONFIG_SYS_FSL_IFC_SIZE1_1, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE }, - { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1, + { CFG_SYS_FLASH_BASE, CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_SIZE1, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE }, @@ -130,9 +130,9 @@ static struct mm_region early_map[] = { PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, #ifdef CONFIG_FSL_IFC - /* Map IFC region #2 up to CONFIG_SYS_FLASH_BASE for NAND boot */ + /* Map IFC region #2 up to CFG_SYS_FLASH_BASE for NAND boot */ { CONFIG_SYS_FSL_IFC_BASE2, CONFIG_SYS_FSL_IFC_BASE2, - CONFIG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2, + CFG_SYS_FLASH_BASE - CONFIG_SYS_FSL_IFC_BASE2, PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE }, #endif @@ -391,7 +391,7 @@ static struct mm_region final_map[] = { PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, #endif -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE {}, /* space holder for secure mem */ #endif {}, @@ -445,7 +445,7 @@ static inline void early_mmu_setup(void) if (el == 3) gd->arch.tlb_addr = CFG_SYS_FSL_OCRAM_BASE; else - gd->arch.tlb_addr = CONFIG_SYS_DDR_SDRAM_BASE; + gd->arch.tlb_addr = CFG_SYS_DDR_SDRAM_BASE; gd->arch.tlb_fillptr = gd->arch.tlb_addr; gd->arch.tlb_size = EARLY_PGTABLE_SIZE; @@ -568,7 +568,7 @@ static inline void final_mmu_setup(void) } } -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) { if (el == 3) { /* @@ -580,7 +580,7 @@ static inline void final_mmu_setup(void) gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff; final_map[index].virt = gd->arch.secure_ram & ~0x3; final_map[index].phys = final_map[index].virt; - final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE; + final_map[index].size = CFG_SYS_MEM_RESERVE_SECURE; final_map[index].attrs = PTE_BLOCK_OUTER_SHARE; gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED; tlb_addr_save = gd->arch.tlb_addr; @@ -1323,10 +1323,10 @@ phys_size_t get_effective_memsize(void) ea_size = gd->ram_size; } -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE /* Check if we have enough space for secure memory */ - if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE) - ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE; + if (ea_size > CFG_SYS_MEM_RESERVE_SECURE) + ea_size -= CFG_SYS_MEM_RESERVE_SECURE; else printf("Error: No enough space for secure memory.\n"); #endif @@ -1433,7 +1433,7 @@ int dram_init_banksize(void) * gd->arch.secure_ram should be done to avoid running it repeatedly. */ -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) { debug("No need to run again, skip %s\n", __func__); @@ -1442,11 +1442,11 @@ int dram_init_banksize(void) #endif gd->bd->bi_dram[0].start = CFG_SYS_SDRAM_BASE; - if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) { - gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + if (gd->ram_size > CFG_SYS_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CFG_SYS_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CFG_SYS_DDR_BLOCK2_BASE; gd->bd->bi_dram[1].size = gd->ram_size - - CONFIG_SYS_DDR_BLOCK1_SIZE; + CFG_SYS_DDR_BLOCK1_SIZE; #ifdef CONFIG_SYS_DDR_BLOCK3_BASE if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) { gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE; @@ -1458,17 +1458,17 @@ int dram_init_banksize(void) } else { gd->bd->bi_dram[0].size = gd->ram_size; } -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE if (gd->bd->bi_dram[0].size > - CONFIG_SYS_MEM_RESERVE_SECURE) { + CFG_SYS_MEM_RESERVE_SECURE) { gd->bd->bi_dram[0].size -= - CONFIG_SYS_MEM_RESERVE_SECURE; + CFG_SYS_MEM_RESERVE_SECURE; gd->arch.secure_ram = gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size; gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED; - gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE; + gd->ram_size -= CFG_SYS_MEM_RESERVE_SECURE; } -#endif /* CONFIG_SYS_MEM_RESERVE_SECURE */ +#endif /* CFG_SYS_MEM_RESERVE_SECURE */ #if defined(CONFIG_RESV_RAM) && !defined(CONFIG_SPL_BUILD) /* Assign memory for MC */ @@ -1520,7 +1520,7 @@ int dram_init_banksize(void) } #endif -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE debug("%s is called. gd->ram_size is reduced to %lu\n", __func__, (ulong)gd->ram_size); #endif @@ -1580,7 +1580,7 @@ void update_early_mmu_table(void) } else { mmu_change_region_attr( CFG_SYS_SDRAM_BASE, - CONFIG_SYS_DDR_BLOCK1_SIZE, + CFG_SYS_DDR_BLOCK1_SIZE, PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS | @@ -1589,10 +1589,10 @@ void update_early_mmu_table(void) #ifndef CONFIG_SYS_DDR_BLOCK2_SIZE #error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE" #endif - if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE > + if (gd->ram_size - CFG_SYS_DDR_BLOCK1_SIZE > CONFIG_SYS_DDR_BLOCK2_SIZE) { mmu_change_region_attr( - CONFIG_SYS_DDR_BLOCK2_BASE, + CFG_SYS_DDR_BLOCK2_BASE, CONFIG_SYS_DDR_BLOCK2_SIZE, PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE | @@ -1601,7 +1601,7 @@ void update_early_mmu_table(void) mmu_change_region_attr( CONFIG_SYS_DDR_BLOCK3_BASE, gd->ram_size - - CONFIG_SYS_DDR_BLOCK1_SIZE - + CFG_SYS_DDR_BLOCK1_SIZE - CONFIG_SYS_DDR_BLOCK2_SIZE, PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE | @@ -1611,9 +1611,9 @@ void update_early_mmu_table(void) #endif { mmu_change_region_attr( - CONFIG_SYS_DDR_BLOCK2_BASE, + CFG_SYS_DDR_BLOCK2_BASE, gd->ram_size - - CONFIG_SYS_DDR_BLOCK1_SIZE, + CFG_SYS_DDR_BLOCK1_SIZE, PTE_BLOCK_MEMTYPE(MT_NORMAL) | PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS | diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 index 9119d60ffb..6f3fe7ca6e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 @@ -116,10 +116,10 @@ Flash Layout Environment Variables ===================== mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined - the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + the value CFG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. mcmemsize: MC DRAM block size in hex. If this variable is not defined, the value - CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. mcinitcmd: This environment variable is defined to initiate MC and DPL deployment from the location where it is stored(NOR, NAND, SD, SATA, USB)during diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c index 4880a313ea..e3c3fc6bfb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1043_ids.c @@ -10,7 +10,7 @@ #include <fsl_sec.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c index e47d3af85e..333d7e2fa2 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/ls1046_ids.c @@ -9,7 +9,7 @@ #include <asm/arch-fsl-layerscape/fsl_portals.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), SET_QP_INFO(FSL_DPAA1_STREAM_ID_END, 0), diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c index 89a6262c12..359cbc0430 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c @@ -531,7 +531,7 @@ static void erratum_a010539(void) porsr1 = in_be32(&gur->porsr1); porsr1 &= ~FSL_CHASSIS2_CCSR_PORSR1_RCW_MASK; - out_be32((void *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), + out_be32((void *)(CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), porsr1); out_be32((void *)(CFG_SYS_FSL_SCFG_ADDR + 0x1a8), 0xffffffff); #endif @@ -643,8 +643,8 @@ void init_pfe_scfg_dcfg_regs(void) out_be32(&scfg->rd_qos1, (unsigned int)(SCFG_RD_QOS1_PFE1_QOS | SCFG_RD_QOS1_PFE2_QOS)); - ecccr2 = in_be32(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2); - out_be32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2, + ecccr2 = in_be32(CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2); + out_be32((void *)CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_ECCCR2, ecccr2 | (unsigned int)DISABLE_PFE_ECC); } #endif diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index 3a4b665f24..61fced451e 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -116,7 +116,7 @@ void board_init_f(ulong dummy) #endif dram_init(); #ifdef CONFIG_SPL_FSL_LS_PPA -#ifndef CONFIG_SYS_MEM_RESERVE_SECURE +#ifndef CFG_SYS_MEM_RESERVE_SECURE #error Need secure RAM for PPA #endif /* diff --git a/arch/arm/cpu/armv8/sec_firmware.c b/arch/arm/cpu/armv8/sec_firmware.c index 540436ba02..c0e8726346 100644 --- a/arch/arm/cpu/armv8/sec_firmware.c +++ b/arch/arm/cpu/armv8/sec_firmware.c @@ -198,7 +198,7 @@ static int sec_firmware_load_image(const void *sec_firmware_img, goto out; } -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE /* * The SEC Firmware must be stored in secure memory. * Append SEC Firmware to secure mmu table. @@ -211,7 +211,7 @@ static int sec_firmware_load_image(const void *sec_firmware_img, sec_firmware_addr = (gd->arch.secure_ram & MEM_RESERVE_SECURE_ADDR_MASK) + gd->arch.tlb_size; #else -#error "The CONFIG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support" +#error "The CFG_SYS_MEM_RESERVE_SECURE must be defined when enabled SEC Firmware support" #endif /* Align SEC Firmware base address to 4K */ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 0669222fed..c9c72e3271 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -20,13 +20,13 @@ * Reserve secure memory * To be aligned with MMU block size */ -#define CONFIG_SYS_MEM_RESERVE_SECURE (66 * 1024 * 1024) /* 66MB */ +#define CFG_SYS_MEM_RESERVE_SECURE (66 * 1024 * 1024) /* 66MB */ #define SPL_TLB_SETBACK 0x1000000 /* 16MB under effective memory top */ #ifdef CONFIG_ARCH_LS2080A #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4, 4 } #define SRDS_MAX_LANES 8 -#define CONFIG_SYS_PAGE_SIZE 0x10000 +#define CFG_SYS_PAGE_SIZE 0x10000 #ifndef L1_CACHE_BYTES #define L1_CACHE_SHIFT 6 #define L1_CACHE_BYTES BIT(L1_CACHE_SHIFT) @@ -37,8 +37,8 @@ #define CFG_SYS_FSL_OCRAM_SIZE 0x00020000 /* Real size 128K */ /* DDR */ -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0x06000000 @@ -96,7 +96,7 @@ #elif defined(CONFIG_ARCH_LS1088A) #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } -#define CONFIG_SYS_PAGE_SIZE 0x10000 +#define CFG_SYS_PAGE_SIZE 0x10000 #define SRDS_MAX_LANES 4 #define SRDS_BITS_PER_LANE 4 @@ -122,8 +122,8 @@ #define SMMU_BASE 0x05000000 /* GR0 Base */ /* DDR */ -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE /* DCFG - GUR */ #define CFG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ @@ -141,15 +141,15 @@ #endif #define CFG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1, 4, 4, 4, 4 } -#define CONFIG_SYS_PAGE_SIZE 0x10000 +#define CFG_SYS_PAGE_SIZE 0x10000 #define CFG_SYS_FSL_OCRAM_BASE 0x18000000 /* initial RAM */ #define SYS_FSL_OCRAM_SPACE_SIZE 0x00200000 /* 2M space */ #define CFG_SYS_FSL_OCRAM_SIZE 0x00040000 /* Real size 256K */ /* DDR */ -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0x06000000 @@ -192,8 +192,8 @@ #define SMMU_BASE 0x05000000 /* GR0 Base */ /* DDR */ -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE /* SEC */ @@ -212,8 +212,8 @@ #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 7 #define CFG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 @@ -251,15 +251,15 @@ #elif defined(CONFIG_ARCH_LS1012A) #define GICD_BASE 0x01401000 #define GICC_BASE 0x01402000 -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE #elif defined(CONFIG_ARCH_LS1046A) #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 8 #define CFG_SYS_NUM_FM1_10GEC 2 -#define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE +#define CFG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) +#define CONFIG_MAX_MEM_MAPPED CFG_SYS_DDR_BLOCK1_SIZE /* SMMU Defintions */ #define SMMU_BASE 0x09000000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h index 9cddb41a89..d5f63f4a7e 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_icid.h @@ -75,7 +75,7 @@ void fdt_fixup_icid(void *blob); #define SET_USB_ICID(usb_num, compat, streamid) \ SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\ - CONFIG_SYS_XHCI_USB##usb_num##_ADDR) + CFG_SYS_XHCI_USB##usb_num##_ADDR) #define SET_SATA_ICID(compat, streamid) \ SET_SCFG_ICID(compat, streamid, sata_icid,\ @@ -142,7 +142,7 @@ extern int fman_icid_tbl_sz; #define SET_USB_ICID(usb_num, compat, streamid) \ SET_GUR_ICID(compat, streamid, usb##usb_num##_amqr,\ - CONFIG_SYS_XHCI_USB##usb_num##_ADDR) + CFG_SYS_XHCI_USB##usb_num##_ADDR) #define SET_SATA_ICID(sata_num, compat, streamid) \ SET_GUR_ICID(compat, streamid, sata##sata_num##_amqr, \ diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 64dc7c88b7..9794db0449 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -11,11 +11,11 @@ #include <linux/bitops.h> #endif -#define CONFIG_SYS_DCSRBAR 0x20000000 -#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00140000) +#define CFG_SYS_DCSRBAR 0x20000000 +#define CFG_SYS_DCSR_DCFG_ADDR (CFG_SYS_DCSRBAR + 0x00140000) #define CFG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) -#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) +#define CFG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000) #define CFG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) #define CFG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) @@ -30,37 +30,37 @@ #define CFG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011c0600) #define CFG_SYS_NS16550_COM3 (CONFIG_SYS_IMMR + 0x011d0500) #define CFG_SYS_NS16550_COM4 (CONFIG_SYS_IMMR + 0x011d0600) -#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000) -#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000) -#define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000) +#define CFG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000) +#define CFG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000) +#define CFG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000) #define CFG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CFG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) -#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0xe90000) -#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0xe80200) - -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0x508000000 -#define CONFIG_SYS_BMAN_MEM_PHYS (0xf00000000ull + \ - CONFIG_SYS_BMAN_MEM_BASE) -#define CONFIG_SYS_BMAN_MEM_SIZE 0x08000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x10000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x10000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0x3E80 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0x500000000 -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_MEM_SIZE 0x08000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x10000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0x3680 +#define CFG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0xe90000) +#define CFG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0xe80200) + +#define CFG_SYS_BMAN_NUM_PORTALS 10 +#define CFG_SYS_BMAN_MEM_BASE 0x508000000 +#define CFG_SYS_BMAN_MEM_PHYS (0xf00000000ull + \ + CFG_SYS_BMAN_MEM_BASE) +#define CFG_SYS_BMAN_MEM_SIZE 0x08000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x10000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x10000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0x3E80 +#define CFG_SYS_QMAN_NUM_PORTALS 10 +#define CFG_SYS_QMAN_MEM_BASE 0x500000000 +#define CFG_SYS_QMAN_MEM_PHYS CFG_SYS_QMAN_MEM_BASE +#define CFG_SYS_QMAN_MEM_SIZE 0x08000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x10000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0x3680 #define CFG_SYS_FSL_TIMER_ADDR 0x02b00000 @@ -134,20 +134,20 @@ #define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */ #define TP_INIT_PER_CLUSTER 4 -#ifndef CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR 0x01000000 +#ifndef CFG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0x01000000 #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#ifndef CFG_SYS_CCSRBAR_PHYS_HIGH +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0 #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_LOW 0x01000000 +#ifndef CFG_SYS_CCSRBAR_PHYS_LOW +#define CFG_SYS_CCSRBAR_PHYS_LOW 0x01000000 #endif -#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ - CONFIG_SYS_CCSRBAR_PHYS_LOW) +#define CFG_SYS_CCSRBAR_PHYS ((CFG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ + CFG_SYS_CCSRBAR_PHYS_LOW) struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index cd112402e0..ca5e33379b 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -33,7 +33,7 @@ #define FSL_ESDHC1_BASE_ADDR CFG_SYS_FSL_ESDHC_ADDR #define FSL_ESDHC2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01150000) #ifndef CONFIG_NXP_LSCH3_2 -#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000) +#define CFG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000) #endif #define CFG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500) #define CFG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011C0600) @@ -67,8 +67,8 @@ #define GPIO4_GPDIR_ADDR (GPIO4_BASE_ADDR + 0x0) #define GPIO4_GPDAT_ADDR (GPIO4_BASE_ADDR + 0x8) -#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) -#define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000) +#define CFG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) +#define CFG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02110000) /* TZ Address Space Controller Definitions */ #define TZASC1_BASE 0x01100000 /* as per CCSR map. */ @@ -105,7 +105,7 @@ #define GPU_BASE_ADDR (CONFIG_SYS_IMMR + 0x0e0c0000) /* SFP */ -#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200) +#define CFG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200) /* SEC */ #define CFG_SYS_FSL_SEC_OFFSET 0x07000000ull @@ -173,7 +173,7 @@ #endif /* Security Monitor */ -#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000) +#define CFG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000) /* MMU 500 */ #define SMMU_SCR0 (SMMU_BASE + 0x0) diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 6de431f6bb..3ad78cb1e6 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -23,7 +23,7 @@ #define CFG_SYS_NS16550_CLK 13000000 #endif -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ { 9600, 19200, 38400, 57600, 115200, 230400, 460800 } /* NAND */ @@ -49,7 +49,7 @@ /* USB OHCI */ #if defined(CONFIG_USB_OHCI_LPC32XX) -#define CONFIG_SYS_USB_OHCI_REGS_BASE USB_BASE +#define CFG_SYS_USB_OHCI_REGS_BASE USB_BASE #endif #endif /* _LPC32XX_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 62026bda9e..6413a307d2 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -11,36 +11,36 @@ #define OCRAM_BASE_S_ADDR 0x10010000 #define OCRAM_S_SIZE 0x00010000 -#define CONFIG_SYS_DCSRBAR 0x20000000 +#define CFG_SYS_DCSRBAR 0x20000000 -#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000) -#define SYS_FSL_DCSR_RCPM_ADDR (CONFIG_SYS_DCSRBAR + 0x00222000) +#define CFG_SYS_DCSR_DCFG_ADDR (CFG_SYS_DCSRBAR + 0x00220000) +#define SYS_FSL_DCSR_RCPM_ADDR (CFG_SYS_DCSRBAR + 0x00222000) #define SYS_FSL_GIC_ADDR (CONFIG_SYS_IMMR + 0x00400000) #define CFG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) #define CFG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000) -#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) +#define CFG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define CFG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) #define CFG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) #define CFG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000) #define CFG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000) -#define CONFIG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000) -#define CONFIG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200) +#define CFG_SYS_SEC_MON_ADDR (CONFIG_SYS_IMMR + 0x00e90000) +#define CFG_SYS_SFP_ADDR (CONFIG_SYS_IMMR + 0x00e80200) #define CFG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000) #define CFG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) #define CFG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000) #define CFG_SYS_FSL_RCPM_ADDR (CONFIG_SYS_IMMR + 0x00ee2000) #define CFG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CFG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) -#define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) +#define CFG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) #define CFG_SYS_FSL_SEC_OFFSET 0x00700000 #define CFG_SYS_FSL_JR0_OFFSET 0x00710000 -#define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 -#define CONFIG_SYS_MDIO1_OFFSET 0x01d24000 +#define CFG_SYS_TSEC1_OFFSET 0x01d10000 +#define CFG_SYS_MDIO1_OFFSET 0x01d24000 -#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) -#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_MDIO1_OFFSET) #define SCTR_BASE_ADDR (CONFIG_SYS_IMMR + 0x01b00000) diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index b0acf67798..a0c3da7f46 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -42,24 +42,24 @@ #define DCFG_DCSR_PORCR1 0 -#ifndef CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR CONFIG_SYS_IMMR +#ifndef CFG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR CONFIG_SYS_IMMR #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#ifndef CFG_SYS_CCSRBAR_PHYS_HIGH #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0xf #else -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0 #endif #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR +#ifndef CFG_SYS_CCSRBAR_PHYS_LOW +#define CFG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_IMMR #endif -#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ - CONFIG_SYS_CCSRBAR_PHYS_LOW) +#define CFG_SYS_CCSRBAR_PHYS ((CFG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ + CFG_SYS_CCSRBAR_PHYS_LOW) struct sys_info { unsigned long freq_processor[CONFIG_MAX_CPUS]; diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h index fb5ded8907..acd8c69f69 100644 --- a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h +++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h @@ -12,14 +12,14 @@ { .compat = name, \ .id = { idA }, .num_ids = 1, \ .reg_offset = off + CONFIG_SYS_IMMR, \ - .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + .compat_offset = compatoff + CFG_SYS_CCSRBAR_PHYS, \ } #define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \ { .compat = name, \ .id = { idA, idB }, .num_ids = 2, \ .reg_offset = off + CONFIG_SYS_IMMR, \ - .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + .compat_offset = compatoff + CFG_SYS_CCSRBAR_PHYS, \ } /* diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index d5c0ed8e6c..a0ab3a0e66 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -899,9 +899,9 @@ struct esdc_regs { * Generic timer support */ #ifdef CONFIG_MX31_CLK32 -#define CONFIG_SYS_TIMER_RATE CONFIG_MX31_CLK32 +#define CFG_SYS_TIMER_RATE CONFIG_MX31_CLK32 #else -#define CONFIG_SYS_TIMER_RATE 32768 +#define CFG_SYS_TIMER_RATE 32768 #endif #endif /* __ASM_ARCH_MX31_IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h index 5b12d90d58..eb1ddca600 100644 --- a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h +++ b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h @@ -36,6 +36,6 @@ struct gpt_regs *const gpt1_regs_ptr = #define GPT_FREE_RUNNING 0xFFFF /* Timer, HZ specific defines */ -#define CONFIG_SYS_HZ_CLOCK ((27 * 1000 * 1000) / GPT_PRESCALER_128) +#define CFG_SYS_HZ_CLOCK ((27 * 1000 * 1000) / GPT_PRESCALER_128) #endif diff --git a/arch/arm/include/asm/arch-sunxi/i2c.h b/arch/arm/include/asm/arch-sunxi/i2c.h index 3525f22e7d..241b44928a 100644 --- a/arch/arm/include/asm/arch-sunxi/i2c.h +++ b/arch/arm/include/asm/arch-sunxi/i2c.h @@ -18,6 +18,6 @@ #endif /* This is abp0-clk on sun4i/5i/7i / abp1-clk on sun6i/sun8i which is 24MHz */ -#define CONFIG_SYS_TCLK 24000000 +#define CFG_SYS_TCLK 24000000 #endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index cd6112dfcd..9e746e380a 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -54,7 +54,7 @@ struct arch_global_data { unsigned long tlb_emerg; #endif #endif -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE #define MEM_RESERVE_SECURE_SECURED 0x1 #define MEM_RESERVE_SECURE_MAINTAINED 0x2 #define MEM_RESERVE_SECURE_ADDR_MASK (~0x3) diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c index 826e09e72c..5e6eaad968 100644 --- a/arch/arm/lib/bdinfo.c +++ b/arch/arm/lib/bdinfo.c @@ -29,7 +29,7 @@ void arch_print_bdinfo(void) struct bd_info *bd = gd->bd; bdinfo_print_num_l("arch_number", bd->bi_arch_number); -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE if (gd->arch.secure_ram & MEM_RESERVE_SECURE_SECURED) { bdinfo_print_num_ll("Secure ram", gd->arch.secure_ram & diff --git a/arch/arm/lib/cache-pl310.c b/arch/arm/lib/cache-pl310.c index bbaaaa4157..d05314ee57 100644 --- a/arch/arm/lib/cache-pl310.c +++ b/arch/arm/lib/cache-pl310.c @@ -11,7 +11,7 @@ #include <config.h> #include <common.h> -struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; +struct pl310_regs *const pl310 = (struct pl310_regs *)CFG_SYS_PL310_BASE; static void pl310_cache_sync(void) { diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index a2bf2e57b9..1a589c7e2a 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -152,7 +152,7 @@ __weak int arm_reserve_mmu(void) debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr, gd->arch.tlb_addr + gd->arch.tlb_size); -#ifdef CONFIG_SYS_MEM_RESERVE_SECURE +#ifdef CFG_SYS_MEM_RESERVE_SECURE /* * Record allocated tlb_addr in case gd->tlb_addr to be overwritten * with location within secure ram. diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index a54c84b062..7cf7d1636f 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -83,8 +83,8 @@ */ _start: -#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG - .word CONFIG_SYS_DV_NOR_BOOT_CFG +#ifdef CFG_SYS_DV_NOR_BOOT_CFG + .word CFG_SYS_DV_NOR_BOOT_CFG #endif ARM_VECTORS #endif /* !defined(CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK) */ diff --git a/arch/arm/mach-at91/arm920t/clock.c b/arch/arm/mach-at91/arm920t/clock.c index c7440278d8..09ac66d619 100644 --- a/arch/arm/mach-at91/arm920t/clock.c +++ b/arch/arm/mach-at91/arm920t/clock.c @@ -26,7 +26,7 @@ static unsigned long at91_css_to_rate(unsigned long css) { switch (css) { case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; + return CFG_SYS_AT91_SLOW_CLOCK; case AT91_PMC_MCKR_CSS_MAIN: return gd->arch.main_clk_rate_hz; case AT91_PMC_MCKR_CSS_PLLA: @@ -107,7 +107,7 @@ int at91_clock_init(unsigned long main_clock) { unsigned freq, mckr; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#ifndef CFG_SYS_AT91_MAIN_CLOCK unsigned tmp; /* * When the bootloader initialized the main oscillator correctly, @@ -120,7 +120,7 @@ int at91_clock_init(unsigned long main_clock) tmp = readl(&pmc->mcfr); } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + main_clock = tmp * (CFG_SYS_AT91_SLOW_CLOCK / 16); } #endif gd->arch.main_clk_rate_hz = main_clock; diff --git a/arch/arm/mach-at91/arm920t/cpu.c b/arch/arm/mach-at91/arm920t/cpu.c index 44c079c0fd..9bf03fd68e 100644 --- a/arch/arm/mach-at91/arm920t/cpu.c +++ b/arch/arm/mach-at91/arm920t/cpu.c @@ -16,11 +16,11 @@ #include <asm/arch/hardware.h> #include <asm/arch/clk.h> -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#ifndef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 0 #endif int arch_cpu_init(void) { - return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); + return at91_clock_init(CFG_SYS_AT91_MAIN_CLOCK); } diff --git a/arch/arm/mach-at91/arm920t/lowlevel_init.S b/arch/arm/mach-at91/arm920t/lowlevel_init.S index 3b91a0cba3..6b7d3cbc71 100644 --- a/arch/arm/mach-at91/arm920t/lowlevel_init.S +++ b/arch/arm/mach-at91/arm920t/lowlevel_init.S @@ -94,11 +94,11 @@ SMRDATA: .word AT91_ASM_MC_SMC_CSR0 .word CONFIG_SYS_SMC_CSR0_VAL .word AT91_ASM_PMC_PLLAR - .word CONFIG_SYS_PLLAR_VAL + .word CFG_SYS_PLLAR_VAL .word AT91_ASM_PMC_PLLBR .word CONFIG_SYS_PLLBR_VAL .word AT91_ASM_PMC_MCKR - .word CONFIG_SYS_MCKR_VAL + .word CFG_SYS_MCKR_VAL SMRDATAE: /* here there's a delay */ SMRDATA1: @@ -107,17 +107,17 @@ SMRDATA1: .word AT91_ASM_PIOC_BSR .word CONFIG_SYS_PIOC_BSR_VAL .word AT91_ASM_PIOC_PDR - .word CONFIG_SYS_PIOC_PDR_VAL + .word CFG_SYS_PIOC_PDR_VAL .word AT91_ASM_MC_EBI_CSA .word CONFIG_SYS_EBI_CSA_VAL .word AT91_ASM_MC_SDRAMC_CR - .word CONFIG_SYS_SDRC_CR_VAL + .word CFG_SYS_SDRC_CR_VAL .word AT91_ASM_MC_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL + .word CFG_SYS_SDRC_MR_VAL .word CFG_SYS_SDRAM .word CFG_SYS_SDRAM_VAL .word AT91_ASM_MC_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL1 + .word CFG_SYS_SDRC_MR_VAL1 .word CFG_SYS_SDRAM .word CFG_SYS_SDRAM_VAL .word CFG_SYS_SDRAM @@ -135,15 +135,15 @@ SMRDATA1: .word CFG_SYS_SDRAM .word CFG_SYS_SDRAM_VAL .word AT91_ASM_MC_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL2 + .word CFG_SYS_SDRC_MR_VAL2 .word CFG_SYS_SDRAM1 .word CFG_SYS_SDRAM_VAL .word AT91_ASM_MC_SDRAMC_TR - .word CONFIG_SYS_SDRC_TR_VAL + .word CFG_SYS_SDRC_TR_VAL .word CFG_SYS_SDRAM .word CFG_SYS_SDRAM_VAL .word AT91_ASM_MC_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL3 + .word CFG_SYS_SDRC_MR_VAL3 .word CFG_SYS_SDRAM .word CFG_SYS_SDRAM_VAL SMRDATA1E: diff --git a/arch/arm/mach-at91/arm920t/timer.c b/arch/arm/mach-at91/arm920t/timer.c index c400e87813..8ef5764e31 100644 --- a/arch/arm/mach-at91/arm920t/timer.c +++ b/arch/arm/mach-at91/arm920t/timer.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; /* the number of clocks per CONFIG_SYS_HZ */ -#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ) +#define TIMER_LOAD_VAL (CFG_SYS_HZ_CLOCK/CONFIG_SYS_HZ) int timer_init(void) { @@ -92,7 +92,7 @@ void __udelay(unsigned long usec) u32 endtime; signed long diff; - tmo = CONFIG_SYS_HZ_CLOCK / 1000; + tmo = CFG_SYS_HZ_CLOCK / 1000; tmo *= usec; tmo /= 1000; diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index c68e0c0c3c..013daf43b7 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -26,7 +26,7 @@ static unsigned long at91_css_to_rate(unsigned long css) { switch (css) { case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; + return CFG_SYS_AT91_SLOW_CLOCK; case AT91_PMC_MCKR_CSS_MAIN: return gd->arch.main_clk_rate_hz; case AT91_PMC_MCKR_CSS_PLLA: @@ -115,7 +115,7 @@ int at91_clock_init(unsigned long main_clock) { unsigned freq, mckr; at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#ifndef CFG_SYS_AT91_MAIN_CLOCK unsigned tmp; /* * When the bootloader initialized the main oscillator correctly, @@ -128,7 +128,7 @@ int at91_clock_init(unsigned long main_clock) tmp = readl(&pmc->mcfr); } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + main_clock = tmp * (CFG_SYS_AT91_SLOW_CLOCK / 16); } #endif gd->arch.main_clk_rate_hz = main_clock; diff --git a/arch/arm/mach-at91/arm926ejs/cpu.c b/arch/arm/mach-at91/arm926ejs/cpu.c index 761edb6df5..5e84b0a40e 100644 --- a/arch/arm/mach-at91/arm926ejs/cpu.c +++ b/arch/arm/mach-at91/arm926ejs/cpu.c @@ -15,13 +15,13 @@ #include <asm/arch/at91_gpbr.h> #include <asm/arch/clk.h> -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#ifndef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 0 #endif int arch_cpu_init(void) { - return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); + return at91_clock_init(CFG_SYS_AT91_MAIN_CLOCK); } void arch_preboot_os(void) diff --git a/arch/arm/mach-at91/arm926ejs/lowlevel_init.S b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S index ecfe589e45..e159a74eea 100644 --- a/arch/arm/mach-at91/arm926ejs/lowlevel_init.S +++ b/arch/arm/mach-at91/arm926ejs/lowlevel_init.S @@ -21,8 +21,8 @@ #ifdef CONFIG_ATMEL_LEGACY #include <asm/arch/at91sam9_matrix.h> #endif -#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL -#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL +#ifndef CFG_SYS_MATRIX_EBICSA_VAL +#define CFG_SYS_MATRIX_EBICSA_VAL CFG_SYS_MATRIX_EBI0CSA_VAL #endif .globl lowlevel_init @@ -67,7 +67,7 @@ POS1: ldr r1, =(AT91_ASM_PMC_MOR) ldr r2, =(AT91_ASM_PMC_SR) /* Main oscillator Enable register PMC_MOR: */ - ldr r0, =CONFIG_SYS_MOR_VAL + ldr r0, =CFG_SYS_MOR_VAL str r0, [r1] /* Reading the PMC Status to detect when the Main Oscillator is enabled */ @@ -85,7 +85,7 @@ MOSCS_Loop: * ---------------------------------------------------------------------------- */ ldr r1, =(AT91_ASM_PMC_PLLAR) - ldr r0, =CONFIG_SYS_PLLAR_VAL + ldr r0, =CFG_SYS_PLLAR_VAL str r0, [r1] /* Reading the PMC Status register to detect when the PLLA is locked */ @@ -105,7 +105,7 @@ MOSCS_Loop1: ldr r1, =(AT91_ASM_PMC_MCKR) /* -Master Clock Controller register PMC_MCKR */ - ldr r0, =CONFIG_SYS_MCKR1_VAL + ldr r0, =CFG_SYS_MCKR1_VAL str r0, [r1] /* Reading the PMC Status to detect when the Master clock is ready */ @@ -116,7 +116,7 @@ MCKRDY_Loop: cmp r3, #AT91_PMC_IXR_MCKRDY bne MCKRDY_Loop - ldr r0, =CONFIG_SYS_MCKR2_VAL + ldr r0, =CFG_SYS_MCKR2_VAL str r0, [r1] /* Reading the PMC Status to detect when the Master clock is ready */ @@ -158,53 +158,53 @@ SDRAM_setup_end: SMRDATA: .word AT91_ASM_WDT_MR - .word CONFIG_SYS_WDTC_WDMR_VAL + .word CFG_SYS_WDTC_WDMR_VAL /* configure PIOx as EBI0 D[16-31] */ #if defined(CONFIG_AT91SAM9263) .word AT91_ASM_PIOD_PDR - .word CONFIG_SYS_PIOD_PDR_VAL1 + .word CFG_SYS_PIOD_PDR_VAL1 .word AT91_ASM_PIOD_PUDR - .word CONFIG_SYS_PIOD_PPUDR_VAL + .word CFG_SYS_PIOD_PPUDR_VAL .word AT91_ASM_PIOD_ASR - .word CONFIG_SYS_PIOD_PPUDR_VAL + .word CFG_SYS_PIOD_PPUDR_VAL #elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \ || defined(CONFIG_AT91SAM9G20) .word AT91_ASM_PIOC_PDR - .word CONFIG_SYS_PIOC_PDR_VAL1 + .word CFG_SYS_PIOC_PDR_VAL1 .word AT91_ASM_PIOC_PUDR - .word CONFIG_SYS_PIOC_PPUDR_VAL + .word CFG_SYS_PIOC_PPUDR_VAL #endif .word AT91_ASM_MATRIX_CSA0 - .word CONFIG_SYS_MATRIX_EBICSA_VAL + .word CFG_SYS_MATRIX_EBICSA_VAL /* flash */ .word AT91_ASM_SMC_MODE0 - .word CONFIG_SYS_SMC0_MODE0_VAL + .word CFG_SYS_SMC0_MODE0_VAL .word AT91_ASM_SMC_CYCLE0 - .word CONFIG_SYS_SMC0_CYCLE0_VAL + .word CFG_SYS_SMC0_CYCLE0_VAL .word AT91_ASM_SMC_PULSE0 - .word CONFIG_SYS_SMC0_PULSE0_VAL + .word CFG_SYS_SMC0_PULSE0_VAL .word AT91_ASM_SMC_SETUP0 - .word CONFIG_SYS_SMC0_SETUP0_VAL + .word CFG_SYS_SMC0_SETUP0_VAL SMRDATA1: .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL1 + .word CFG_SYS_SDRC_MR_VAL1 .word AT91_ASM_SDRAMC_TR - .word CONFIG_SYS_SDRC_TR_VAL1 + .word CFG_SYS_SDRC_TR_VAL1 .word AT91_ASM_SDRAMC_CR - .word CONFIG_SYS_SDRC_CR_VAL + .word CFG_SYS_SDRC_CR_VAL .word AT91_ASM_SDRAMC_MDR - .word CONFIG_SYS_SDRC_MDR_VAL + .word CFG_SYS_SDRC_MDR_VAL .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL2 + .word CFG_SYS_SDRC_MR_VAL2 .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL1 .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL3 + .word CFG_SYS_SDRC_MR_VAL3 .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL2 .word CFG_SYS_SDRAM_BASE @@ -222,20 +222,20 @@ SMRDATA1: .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL9 .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL4 + .word CFG_SYS_SDRC_MR_VAL4 .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL10 .word AT91_ASM_SDRAMC_MR - .word CONFIG_SYS_SDRC_MR_VAL5 + .word CFG_SYS_SDRC_MR_VAL5 .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL11 .word AT91_ASM_SDRAMC_TR - .word CONFIG_SYS_SDRC_TR_VAL2 + .word CFG_SYS_SDRC_TR_VAL2 .word CFG_SYS_SDRAM_BASE .word CFG_SYS_SDRAM_VAL12 /* User reset enable*/ .word AT91_ASM_RSTC_MR - .word CONFIG_SYS_RSTC_RMR_VAL + .word CFG_SYS_RSTC_RMR_VAL #ifdef CONFIG_SYS_MATRIX_MCFG_REMAP /* MATRIX_MCFG - REMAP all masters */ .word AT91_ASM_MATRIX_MCFG diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c index aa6bb6bf31..6bfa02d1d0 100644 --- a/arch/arm/mach-at91/armv7/clock.c +++ b/arch/arm/mach-at91/armv7/clock.c @@ -28,7 +28,7 @@ static unsigned long at91_css_to_rate(unsigned long css) { switch (css) { case AT91_PMC_MCKR_CSS_SLOW: - return CONFIG_SYS_AT91_SLOW_CLOCK; + return CFG_SYS_AT91_SLOW_CLOCK; case AT91_PMC_MCKR_CSS_MAIN: return gd->arch.main_clk_rate_hz; case AT91_PMC_MCKR_CSS_PLLA: @@ -58,7 +58,7 @@ int at91_clock_init(unsigned long main_clock) { unsigned freq, mckr; struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#ifndef CFG_SYS_AT91_MAIN_CLOCK unsigned tmp; /* * When the bootloader initialized the main oscillator correctly, @@ -71,7 +71,7 @@ int at91_clock_init(unsigned long main_clock) tmp = readl(&pmc->mcfr); } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); tmp &= AT91_PMC_MCFR_MAINF_MASK; - main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + main_clock = tmp * (CFG_SYS_AT91_SLOW_CLOCK / 16); } #endif gd->arch.main_clk_rate_hz = main_clock; @@ -271,7 +271,7 @@ u32 at91_get_periph_generated_clk(u32 id) clk_source = regval & AT91_PMC_PCR_GCKCSS; switch (clk_source) { case AT91_PMC_PCR_GCKCSS_SLOW_CLK: - freq = CONFIG_SYS_AT91_SLOW_CLOCK; + freq = CFG_SYS_AT91_SLOW_CLOCK; break; case AT91_PMC_PCR_GCKCSS_MAIN_CLK: freq = gd->arch.main_clk_rate_hz; diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 9b3753491e..616621a1f9 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -18,8 +18,8 @@ #include <asm/arch/at91_gpbr.h> #include <asm/arch/clk.h> -#ifndef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#ifndef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 0 #endif int arch_cpu_init(void) @@ -27,7 +27,7 @@ int arch_cpu_init(void) #if defined(CONFIG_CLK_CCF) return 0; #else - return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); + return at91_clock_init(CFG_SYS_AT91_MAIN_CLOCK); #endif } diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 2daeb4fef8..103db26953 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -128,7 +128,7 @@ #define ATMEL_BASE_CS7 0x80000000 /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c +#define CFG_SYS_TIMER_COUNTER 0xfffffd3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index d5de8d5551..2b252f1e1e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -112,7 +112,7 @@ #define ATMEL_BASE_CS7 0x80000000 /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c +#define CFG_SYS_TIMER_COUNTER 0xfffffd3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index c9fff934da..0aa1862567 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -127,7 +127,7 @@ #define ATMEL_BASE_CS7 0x80000000 /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c +#define CFG_SYS_TIMER_COUNTER 0xfffffd3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 588032582b..22116f375b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -132,7 +132,7 @@ #define ATMEL_BASE_CS7 0x80000000 /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c +#define CFG_SYS_TIMER_COUNTER 0xfffffd3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 8f9155c9ea..b2c074e93e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -112,7 +112,7 @@ #define ATMEL_BASE_CS5 0x60000000 /* Compact Flash Slot 1 */ /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c +#define CFG_SYS_TIMER_COUNTER 0xfffffd3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index e3c494c5d5..0efb4a9f6d 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -162,7 +162,7 @@ #endif /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffe3c +#define CFG_SYS_TIMER_COUNTER 0xfffffe3c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/sam9x60.h b/arch/arm/mach-at91/include/mach/sam9x60.h index c08d19c691..47c7c7209e 100644 --- a/arch/arm/mach-at91/include/mach/sam9x60.h +++ b/arch/arm/mach-at91/include/mach/sam9x60.h @@ -140,7 +140,7 @@ #define ATMEL_CPU_NAME get_cpu_name() /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffe4c +#define CFG_SYS_TIMER_COUNTER 0xfffffe4c /* * Other misc defines diff --git a/arch/arm/mach-at91/include/mach/sama5d2.h b/arch/arm/mach-at91/include/mach/sama5d2.h index 5ff20e9573..567cdd3cba 100644 --- a/arch/arm/mach-at91/include/mach/sama5d2.h +++ b/arch/arm/mach-at91/include/mach/sama5d2.h @@ -238,7 +238,7 @@ #define cpu_is_sama5d2 _cpu_is_sama5d2 /* PIT Timer(PIT_PIIR) */ -#define CONFIG_SYS_TIMER_COUNTER 0xf804803c +#define CFG_SYS_TIMER_COUNTER 0xf804803c #ifndef __ASSEMBLY__ unsigned int get_chip_id(void); diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 83f18a8148..9efcf5f4fa 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -185,7 +185,7 @@ #define CPU_HAS_PCR /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfffffe3c +#define CFG_SYS_TIMER_COUNTER 0xfffffe3c /* * PMECC table in ROM diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index e2edb6a51b..9c80286ade 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -217,7 +217,7 @@ (get_extension_chip_id() == ARCH_EXID_SAMA5D44)) /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c +#define CFG_SYS_TIMER_COUNTER 0xfc06863c /* * No PMECC Galois table in ROM diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index ea19ec322e..dfba9f730c 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -101,17 +101,17 @@ void board_init_f(ulong dummy) at91_pllicpr_init(0x00); /* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */ - at91_plla_init(CONFIG_SYS_AT91_PLLA); + at91_plla_init(CFG_SYS_AT91_PLLA); /* PCK = PLLA = 2 * MCK */ - at91_mck_init(CONFIG_SYS_MCKR); + at91_mck_init(CFG_SYS_MCKR); /* Switch MCK on PLLA output */ - at91_mck_init(CONFIG_SYS_MCKR_CSS); + at91_mck_init(CFG_SYS_MCKR_CSS); -#if defined(CONFIG_SYS_AT91_PLLB) +#if defined(CFG_SYS_AT91_PLLB) /* Configure PLLB */ - at91_pllb_init(CONFIG_SYS_AT91_PLLB); + at91_pllb_init(CFG_SYS_AT91_PLLB); #endif /* Enable External Reset */ @@ -120,7 +120,7 @@ void board_init_f(ulong dummy) /* Initialize matrix */ matrix_init(); - gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK; + gd->arch.mck_rate_hz = CFG_SYS_MASTER_CLOCK; /* * init timer long enough for using in spl. */ diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index 217ed12e31..a30c4f6c07 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -124,7 +124,7 @@ void board_init_f(ulong dummy) /* PMC configuration */ at91_pmc_init(); - at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); + at91_clock_init(CFG_SYS_AT91_MAIN_CLOCK); matrix_init(); diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c index 0f68f9fe59..dae60262f5 100644 --- a/arch/arm/mach-davinci/cpu.c +++ b/arch/arm/mach-davinci/cpu.c @@ -42,7 +42,7 @@ int clk_get(enum davinci_clk_ids id) int pll_out; unsigned int pll_base; - pll_out = CONFIG_SYS_OSCIN_FREQ; + pll_out = CFG_SYS_OSCIN_FREQ; if (id == DAVINCI_AUXCLK_CLKID) goto out; diff --git a/arch/arm/mach-davinci/da850_lowlevel.c b/arch/arm/mach-davinci/da850_lowlevel.c index 2319ac6d56..08c8f59252 100644 --- a/arch/arm/mach-davinci/da850_lowlevel.c +++ b/arch/arm/mach-davinci/da850_lowlevel.c @@ -185,9 +185,9 @@ static int da850_ddr_setup(void) setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN); } setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN); - writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); + writel(CFG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr); - if (CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { + if (CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT)) { /* DDR2 */ clrbits_le32(&davinci_syscfg1_regs->ddr_slew, (1 << DDR_SLEW_DDR_PDENA_BIT) | @@ -211,19 +211,19 @@ static int da850_ddr_setup(void) * At the same time, set the TIMUNLOCK bit to allow changing * the timing registers */ - tmp = CONFIG_SYS_DA850_DDR2_SDBCR; + tmp = CFG_SYS_DA850_DDR2_SDBCR; tmp &= ~DV_DDR_BOOTUNLOCK; tmp |= DV_DDR_TIMUNLOCK; writel(tmp, &dv_ddr2_regs_ctrl->sdbcr); /* write memory configuration and timing */ - if (!(CONFIG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { + if (!(CFG_SYS_DA850_DDR2_SDBCR & (1 << DV_DDR_SDCR_DDR2EN_SHIFT))) { /* MOBILE DDR only*/ - writel(CONFIG_SYS_DA850_DDR2_SDBCR2, + writel(CFG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2); } - writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); - writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); + writel(CFG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr); + writel(CFG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2); /* clear the TIMUNLOCK bit and write the value of the CL field */ tmp &= ~DV_DDR_TIMUNLOCK; @@ -233,7 +233,7 @@ static int da850_ddr_setup(void) * LPMODEN and MCLKSTOPEN must be set! * Without this bits set, PSC don;t switch states !! */ - writel(CONFIG_SYS_DA850_DDR2_SDRCR | + writel(CFG_SYS_DA850_DDR2_SDRCR | (1 << DV_DDR_SRCR_LPMODEN_SHIFT) | (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT), &dv_ddr2_regs_ctrl->sdrcr); @@ -246,7 +246,7 @@ static int da850_ddr_setup(void) /* disable self refresh */ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_MCLKSTOPEN); - writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); + writel(CFG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr); return 0; } @@ -265,7 +265,7 @@ int arch_cpu_init(void) writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1); dv_maskbits(&davinci_syscfg_regs->suspsrc, - CONFIG_SYS_DA850_SYSCFG_SUSPSRC); + CFG_SYS_DA850_SYSCFG_SUSPSRC); /* configure pinmux settings */ if (davinci_configure_pin_mux_items(pinmuxes, pinmuxes_size)) @@ -273,8 +273,8 @@ int arch_cpu_init(void) #if defined(CONFIG_SYS_DA850_PLL_INIT) /* PLL setup */ - da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM); - da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM); + da850_pll_init(davinci_pllc0_regs, CFG_SYS_DA850_PLL0_PLLM); + da850_pll_init(davinci_pllc1_regs, CFG_SYS_DA850_PLL1_PLLM); #endif /* setup CSn config */ #if defined(CONFIG_SYS_DA850_CS2CFG) diff --git a/arch/arm/mach-davinci/timer.c b/arch/arm/mach-davinci/timer.c index 43e0574901..83c190b620 100644 --- a/arch/arm/mach-davinci/timer.c +++ b/arch/arm/mach-davinci/timer.c @@ -32,7 +32,7 @@ DECLARE_GLOBAL_DATA_PTR; static struct davinci_timer * const timer = - (struct davinci_timer *)CONFIG_SYS_TIMERBASE; + (struct davinci_timer *)CFG_SYS_TIMERBASE; #define TIMER_LOAD_VAL 0xffffffff @@ -47,7 +47,7 @@ int timer_init(void) writel(0x0, &timer->tim34); writel(TIMER_LOAD_VAL, &timer->prd34); writel(2 << 22, &timer->tcr); - gd->arch.timer_rate_hz = CONFIG_SYS_HZ_CLOCK / TIM_CLK_DIV; + gd->arch.timer_rate_hz = CFG_SYS_HZ_CLOCK / TIM_CLK_DIV; gd->arch.timer_reset_value = 0; return(0); diff --git a/arch/arm/mach-exynos/spl_boot.c b/arch/arm/mach-exynos/spl_boot.c index f518539057..553dac75b6 100644 --- a/arch/arm/mach-exynos/spl_boot.c +++ b/arch/arm/mach-exynos/spl_boot.c @@ -141,7 +141,7 @@ static void exynos_spi_copy(unsigned int uboot_size, unsigned int uboot_addr) { int upto, todo; int i, timeout = 100; - struct exynos_spi *regs = (struct exynos_spi *)CONFIG_SYS_SPI_BASE; + struct exynos_spi *regs = (struct exynos_spi *)CFG_SYS_SPI_BASE; set_spi_clk(PERIPH_ID_SPI1, 50000000); /* set spi clock to 50Mhz */ /* set the spi1 GPIO */ diff --git a/arch/arm/mach-imx/image-container.c b/arch/arm/mach-imx/image-container.c index 0e76786482..06ee608c4a 100644 --- a/arch/arm/mach-imx/image-container.c +++ b/arch/arm/mach-imx/image-container.c @@ -248,13 +248,13 @@ unsigned long spl_nor_get_uboot_base(void) int end; /* Calculate the image set end, - * if it is less than CONFIG_SYS_UBOOT_BASE(0x8281000), - * we use CONFIG_SYS_UBOOT_BASE + * if it is less than CFG_SYS_UBOOT_BASE(0x8281000), + * we use CFG_SYS_UBOOT_BASE * Otherwise, use the calculated address */ end = get_imageset_end((void *)NULL, QSPI_NOR_DEV); - if (end <= CONFIG_SYS_UBOOT_BASE) - end = CONFIG_SYS_UBOOT_BASE; + if (end <= CFG_SYS_UBOOT_BASE) + end = CFG_SYS_UBOOT_BASE; else end = ROUND(end, SZ_1K); diff --git a/arch/arm/mach-imx/mx5/lowlevel_init.S b/arch/arm/mach-imx/mx5/lowlevel_init.S index b42cc3e9e4..6ec38dcfa4 100644 --- a/arch/arm/mach-imx/mx5/lowlevel_init.S +++ b/arch/arm/mach-imx/mx5/lowlevel_init.S @@ -205,7 +205,7 @@ setup_pll_func: /* Switch peripheral to PLL 3 */ ldr r0, =CCM_BASE_ADDR - ldr r1, =0x000010C0 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000010C0 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] ldr r1, =0x13239145 str r1, [r0, #CLKCTL_CBCDR] @@ -215,7 +215,7 @@ setup_pll_func: ldr r0, =CCM_BASE_ADDR ldr r1, =0x19239145 str r1, [r0, #CLKCTL_CBCDR] - ldr r1, =0x000020C0 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C0 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] setup_pll PLL3_BASE_ADDR, 216 @@ -240,10 +240,10 @@ setup_pll_func: /* setup the rest */ /* Use lp_apm (24MHz) source for perclk */ - ldr r1, =0x000020C2 | CONFIG_SYS_DDR_CLKSEL + ldr r1, =0x000020C2 | CFG_SYS_DDR_CLKSEL str r1, [r0, #CLKCTL_CBCMR] /* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */ - ldr r1, =CONFIG_SYS_CLKTL_CBCDR + ldr r1, =CFG_SYS_CLKTL_CBCDR str r1, [r0, #CLKCTL_CBCDR] /* Restore the default values in the Gate registers */ @@ -378,7 +378,7 @@ ENTRY(lowlevel_init) mov r10, lr mov r4, #0 /* Fix R4 to 0 */ -#if defined(CONFIG_SYS_MAIN_PWR_ON) +#if defined(CFG_SYS_MAIN_PWR_ON) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #1 << 23 diff --git a/arch/arm/mach-k3/config_secure.mk b/arch/arm/mach-k3/config_secure.mk index 9cc1f9eb24..7bc8af813a 100644 --- a/arch/arm/mach-k3/config_secure.mk +++ b/arch/arm/mach-k3/config_secure.mk @@ -30,7 +30,7 @@ tispl.bin_HS: $(obj)/u-boot-spl-nodtb.bin_HS $(patsubst %,$(obj)/dts/%.dtb_HS,$( $(call if_changed,mkfitimage) MKIMAGEFLAGS_u-boot.img_HS = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST))) diff --git a/arch/arm/mach-keystone/cmd_mon.c b/arch/arm/mach-keystone/cmd_mon.c index 4734e4c714..dc97bac855 100644 --- a/arch/arm/mach-keystone/cmd_mon.c +++ b/arch/arm/mach-keystone/cmd_mon.c @@ -23,7 +23,7 @@ static int do_mon_install(struct cmd_tbl *cmdtp, int flag, int argc, if (argc < 2) return CMD_RET_USAGE; - freq = CONFIG_SYS_HZ_CLOCK; + freq = CFG_SYS_HZ_CLOCK; addr = hextoul(argv[1], NULL); diff --git a/arch/arm/mach-keystone/include/mach/hardware.h b/arch/arm/mach-keystone/include/mach/hardware.h index 98a8f058df..424c32a4be 100644 --- a/arch/arm/mach-keystone/include/mach/hardware.h +++ b/arch/arm/mach-keystone/include/mach/hardware.h @@ -263,7 +263,7 @@ typedef volatile unsigned int *dv_reg_p; /* MSMC segment size shift bits */ #define KS2_MSMC_SEG_SIZE_SHIFT 12 #define KS2_MSMC_MAP_SEG_NUM (2 << (30 - KS2_MSMC_SEG_SIZE_SHIFT)) -#define KS2_MSMC_DST_SEG_BASE (CONFIG_SYS_LPAE_SDRAM_BASE >> \ +#define KS2_MSMC_DST_SEG_BASE (CFG_SYS_LPAE_SDRAM_BASE >> \ KS2_MSMC_SEG_SIZE_SHIFT) /* Device speed */ diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index 5186f6e4f9..a2781e25a2 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -52,8 +52,8 @@ /* Use common timer */ #ifndef CONFIG_TIMER -#define CONFIG_SYS_TIMER_COUNTER (MVEBU_TIMER_BASE + 0x14) -#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_TCLK +#define CFG_SYS_TIMER_COUNTER (MVEBU_TIMER_BASE + 0x14) +#define CFG_SYS_TIMER_RATE CFG_SYS_TCLK #endif #endif /* _KW_CONFIG_H */ diff --git a/arch/arm/mach-kirkwood/include/mach/kw88f6192.h b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h index c44eacfc1b..d3a3a83657 100644 --- a/arch/arm/mach-kirkwood/include/mach/kw88f6192.h +++ b/arch/arm/mach-kirkwood/include/mach/kw88f6192.h @@ -15,6 +15,6 @@ #define KW_REGS_PHY_BASE KW88F6192_REGS_PHYS_BASE /* TCLK Core Clock defination */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +#define CFG_SYS_TCLK 166000000 /* 166MHz */ #endif /* _CONFIG_KW88F6192_H */ diff --git a/arch/arm/mach-kirkwood/include/mach/kw88f6281.h b/arch/arm/mach-kirkwood/include/mach/kw88f6281.h index f86cd0bb60..7f8e156a6b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kw88f6281.h +++ b/arch/arm/mach-kirkwood/include/mach/kw88f6281.h @@ -15,7 +15,7 @@ #define KW_REGS_PHY_BASE KW88F6281_REGS_PHYS_BASE /* TCLK Core Clock definition */ -#define CONFIG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(21)) ? \ +#define CFG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(21)) ? \ 166666667 : 200000000) #endif /* _ASM_ARCH_KW88F6281_H */ diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c index 1f8cdf8744..67ad5e5907 100644 --- a/arch/arm/mach-mvebu/cpu.c +++ b/arch/arm/mach-mvebu/cpu.c @@ -659,7 +659,7 @@ void enable_caches(void) void v7_outer_cache_enable(void) { struct pl310_regs *const pl310 = - (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + (struct pl310_regs *)CFG_SYS_PL310_BASE; /* The L2 cache is already disabled at this point */ @@ -691,7 +691,7 @@ void v7_outer_cache_enable(void) void v7_outer_cache_disable(void) { struct pl310_regs *const pl310 = - (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + (struct pl310_regs *)CFG_SYS_PL310_BASE; clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN); } diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index 3b9618852c..e6383d4a86 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -54,7 +54,7 @@ #define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) #define MVEBU_L2_CACHE_BASE (MVEBU_REGISTER(0x08000)) -#define CONFIG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE +#define CFG_SYS_PL310_BASE MVEBU_L2_CACHE_BASE #define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) #define MVEBU_TWSI1_BASE (MVEBU_REGISTER(0x11100)) #define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) @@ -146,7 +146,7 @@ #define BOOT_FROM_UART 0x30 #define BOOT_FROM_SPI 0x38 -#define CONFIG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(20)) ? \ +#define CFG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(20)) ? \ 200000000 : 166000000) #elif defined(CONFIG_ARMADA_38X) /* SAR values for Armada 38x */ @@ -169,7 +169,7 @@ #define BOOT_FROM_MMC 0x30 #define BOOT_FROM_MMC_ALT 0x31 -#define CONFIG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(15)) ? \ +#define CFG_SYS_TCLK ((readl(CONFIG_SAR_REG) & BIT(15)) ? \ 200000000 : 250000000) #elif defined(CONFIG_ARMADA_MSYS) /* SAR values for MSYS */ @@ -188,7 +188,7 @@ #define BOOT_FROM_UART 0x2 #define BOOT_FROM_SPI 0x3 -#define CONFIG_SYS_TCLK 200000000 /* 200MHz */ +#define CFG_SYS_TCLK 200000000 /* 200MHz */ #elif defined(CONFIG_ARMADA_XP) /* SAR values for Armada XP */ #define CONFIG_SAR_REG (MVEBU_REGISTER(0x18230)) @@ -209,7 +209,7 @@ #define BOOT_FROM_UART 0x2 #define BOOT_FROM_SPI 0x3 -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ +#define CFG_SYS_TCLK 250000000 /* 250MHz */ #endif #endif /* _MVEBU_SOC_H */ diff --git a/arch/arm/mach-mvebu/lowlevel.S b/arch/arm/mach-mvebu/lowlevel.S index 60c2072c35..6c9783aa63 100644 --- a/arch/arm/mach-mvebu/lowlevel.S +++ b/arch/arm/mach-mvebu/lowlevel.S @@ -35,10 +35,10 @@ ENTRY(arch_very_early_init) * Disable L2 cache * * NOTE: Internal registers are still at address INTREG_BASE_ADDR_REG - * but CONFIG_SYS_PL310_BASE is already calculated from base + * but CFG_SYS_PL310_BASE is already calculated from base * address SOC_REGS_PHY_BASE. */ - ldr r1, =(CONFIG_SYS_PL310_BASE - SOC_REGS_PHY_BASE + INTREG_BASE_ADDR_REG) + ldr r1, =(CFG_SYS_PL310_BASE - SOC_REGS_PHY_BASE + INTREG_BASE_ADDR_REG) ldr r0, [r1, #L2X0_CTRL_OFF] bic r0, #L2X0_CTRL_EN str r0, [r1, #L2X0_CTRL_OFF] diff --git a/arch/arm/mach-npcm/npcm7xx/l2_cache_pl310.c b/arch/arm/mach-npcm/npcm7xx/l2_cache_pl310.c index cba2e342dc..ed4b1ca5c9 100644 --- a/arch/arm/mach-npcm/npcm7xx/l2_cache_pl310.c +++ b/arch/arm/mach-npcm/npcm7xx/l2_cache_pl310.c @@ -11,7 +11,7 @@ void l2_pl310_init(void); void set_pl310_ctrl(u32 enable) { - struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + struct pl310_regs *const pl310 = (struct pl310_regs *)CFG_SYS_PL310_BASE; writel(enable, &pl310->pl310_ctrl); } diff --git a/arch/arm/mach-omap2/config_secure.mk b/arch/arm/mach-omap2/config_secure.mk index f76262bb0c..24ddcdb961 100644 --- a/arch/arm/mach-omap2/config_secure.mk +++ b/arch/arm/mach-omap2/config_secure.mk @@ -102,7 +102,7 @@ u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin FORCE ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot_HS.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ - -a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ + -a $(CONFIG_TEXT_BASE) -e $(CFG_SYS_UBOOT_START) \ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb_HS,$(subst ",,$(CONFIG_OF_LIST))) diff --git a/arch/arm/mach-omap2/mem-common.c b/arch/arm/mach-omap2/mem-common.c index 803dc7fb71..19197482aa 100644 --- a/arch/arm/mach-omap2/mem-common.c +++ b/arch/arm/mach-omap2/mem-common.c @@ -124,11 +124,11 @@ void set_gpmc_cs0(int flash_type) #if defined(CONFIG_NOR) case MTD_DEV_TYPE_NOR: gpmc_regs = gpmc_regs_nor; - base = CONFIG_SYS_FLASH_BASE; - size = (CONFIG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M : - ((CONFIG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M : - ((CONFIG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M : - ((CONFIG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M : + base = CFG_SYS_FLASH_BASE; + size = (CFG_SYS_FLASH_SIZE > 0x08000000) ? GPMC_SIZE_256M : + ((CFG_SYS_FLASH_SIZE > 0x04000000) ? GPMC_SIZE_128M : + ((CFG_SYS_FLASH_SIZE > 0x02000000) ? GPMC_SIZE_64M : + ((CFG_SYS_FLASH_SIZE > 0x01000000) ? GPMC_SIZE_32M : GPMC_SIZE_16M))); break; #endif @@ -142,7 +142,7 @@ void set_gpmc_cs0(int flash_type) #if defined(CONFIG_CMD_ONENAND) case MTD_DEV_TYPE_ONENAND: gpmc_regs = gpmc_regs_onenand; - base = CONFIG_SYS_ONENAND_BASE; + base = CFG_SYS_ONENAND_BASE; size = GPMC_SIZE_128M; break; #endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 00d91c1013..71fdf5bf48 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; -static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; +static struct gptimer *timer_base = (struct gptimer *)CFG_SYS_TIMERBASE; static ulong get_timer_masked(void); /* diff --git a/arch/arm/mach-orion5x/include/mach/mv88f5182.h b/arch/arm/mach-orion5x/include/mach/mv88f5182.h index 0e9fe0dc51..ee0aa94bf2 100644 --- a/arch/arm/mach-orion5x/include/mach/mv88f5182.h +++ b/arch/arm/mach-orion5x/include/mach/mv88f5182.h @@ -18,6 +18,6 @@ #define ORION5X_REGS_PHY_BASE F88F5182_REGS_PHYS_BASE /* TCLK Core Clock defination */ -#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ +#define CFG_SYS_TCLK 166000000 /* 166MHz */ #endif /* _CONFIG_88F5182_H */ diff --git a/arch/arm/mach-orion5x/timer.c b/arch/arm/mach-orion5x/timer.c index d7ea2e3943..b373e59e6f 100644 --- a/arch/arm/mach-orion5x/timer.c +++ b/arch/arm/mach-orion5x/timer.c @@ -74,7 +74,7 @@ struct orion5x_tmr_registers *orion5x_tmr_regs = static inline ulong read_timer(void) { return readl(CNTMR_VAL_REG(UBOOT_CNTR)) - / (CONFIG_SYS_TCLK / 1000); + / (CFG_SYS_TCLK / 1000); } DECLARE_GLOBAL_DATA_PTR; @@ -92,7 +92,7 @@ static ulong get_timer_masked(void) } else { /* we have an overflow ... */ timestamp += lastdec + - (TIMER_LOAD_VAL / (CONFIG_SYS_TCLK / 1000)) - now; + (TIMER_LOAD_VAL / (CFG_SYS_TCLK / 1000)) - now; } lastdec = now; @@ -115,7 +115,7 @@ void __udelay(unsigned long usec) ulong delayticks; current = uboot_cntr_val(); - delayticks = (usec * (CONFIG_SYS_TCLK / 1000000)); + delayticks = (usec * (CFG_SYS_TCLK / 1000000)); if (current < delayticks) { delayticks -= current; diff --git a/arch/arm/mach-rmobile/include/mach/r8a7790.h b/arch/arm/mach-rmobile/include/mach/r8a7790.h index 28669e3c77..485ea7e28d 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7790.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7790.h @@ -24,7 +24,7 @@ #define MSTP11_BITS 0x00000000 /* SDHI */ -#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 4 +#define CFG_SYS_SH_SDHI_NR_CHANNEL 4 #define R8A7790_CUT_ES2X 2 #define IS_R8A7790_ES2() \ diff --git a/arch/arm/mach-rmobile/include/mach/r8a7791.h b/arch/arm/mach-rmobile/include/mach/r8a7791.h index 37d134c5bf..2006ad58a5 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7791.h @@ -14,7 +14,7 @@ */ /* SDHI */ -#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 +#define CFG_SYS_SH_SDHI_NR_CHANNEL 3 #define DBSC3_1_QOS_R0_BASE 0xE67A1000 #define DBSC3_1_QOS_R1_BASE 0xE67A1100 diff --git a/arch/arm/mach-rmobile/include/mach/r8a7792.h b/arch/arm/mach-rmobile/include/mach/r8a7792.h index 06db64af6c..cc1b00db33 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7792.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7792.h @@ -24,6 +24,6 @@ #define MSTP11_BITS 0x00000008 /* SDHI */ -#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 1 +#define CFG_SYS_SH_SDHI_NR_CHANNEL 1 #endif /* __ASM_ARCH_R8A7792_H */ diff --git a/arch/arm/mach-rmobile/include/mach/r8a7793.h b/arch/arm/mach-rmobile/include/mach/r8a7793.h index 85f59d9771..02f4286ef1 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7793.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7793.h @@ -15,7 +15,7 @@ */ /* SDHI */ -#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 +#define CFG_SYS_SH_SDHI_NR_CHANNEL 3 #define DBSC3_1_QOS_R0_BASE 0xE67A1000 #define DBSC3_1_QOS_R1_BASE 0xE67A1100 diff --git a/arch/arm/mach-rmobile/include/mach/r8a7794.h b/arch/arm/mach-rmobile/include/mach/r8a7794.h index 2bd6e469c8..a2a949d4d6 100644 --- a/arch/arm/mach-rmobile/include/mach/r8a7794.h +++ b/arch/arm/mach-rmobile/include/mach/r8a7794.h @@ -24,7 +24,7 @@ #define MSTP11_BITS 0x000001C0 /* SDHI */ -#define CONFIG_SYS_SH_SDHI_NR_CHANNEL 3 +#define CFG_SYS_SH_SDHI_NR_CHANNEL 3 #define R8A7794_CUT_ES2 2 #define IS_R8A7794_ES2() \ diff --git a/arch/arm/mach-rmobile/timer.c b/arch/arm/mach-rmobile/timer.c index ba06535e4c..293c23b5e2 100644 --- a/arch/arm/mach-rmobile/timer.c +++ b/arch/arm/mach-rmobile/timer.c @@ -40,8 +40,8 @@ static u64 get_time_us(void) { u64 timer = get_cpu_global_timer(); - timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1)); - do_div(timer, CLK2MHZ(CONFIG_SYS_CPU_CLK)); + timer = ((timer << 2) + (CLK2MHZ(CFG_SYS_CPU_CLK) >> 1)); + do_div(timer, CLK2MHZ(CFG_SYS_CPU_CLK)); return timer; } @@ -65,7 +65,7 @@ void __udelay(unsigned long usec) u64 wait; start = get_cpu_global_timer(); - wait = (u64)((usec * CLK2MHZ(CONFIG_SYS_CPU_CLK)) >> 2); + wait = (u64)((usec * CLK2MHZ(CFG_SYS_CPU_CLK)) >> 2); do { current = get_cpu_global_timer(); } while ((current - start) < wait); @@ -83,5 +83,5 @@ unsigned long long get_ticks(void) ulong get_tbclk(void) { - return (ulong)(CONFIG_SYS_CPU_CLK >> 2); + return (ulong)(CFG_SYS_CPU_CLK >> 2); } diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c index 9c19157de7..5b5a81a255 100644 --- a/arch/arm/mach-socfpga/misc.c +++ b/arch/arm/mach-socfpga/misc.c @@ -34,7 +34,7 @@ phys_addr_t socfpga_sysmgr_base __section(".data"); #ifdef CONFIG_SYS_L2_PL310 static const struct pl310_regs *const pl310 = - (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + (struct pl310_regs *)CFG_SYS_PL310_BASE; #endif struct bsel bsel_str[] = { diff --git a/arch/arm/mach-socfpga/misc_arria10.c b/arch/arm/mach-socfpga/misc_arria10.c index 7ce888d197..93c9e8b0fb 100644 --- a/arch/arm/mach-socfpga/misc_arria10.c +++ b/arch/arm/mach-socfpga/misc_arria10.c @@ -60,7 +60,7 @@ static Altera_desc altera_fpga[] = { #if defined(CONFIG_SPL_BUILD) static struct pl310_regs *const pl310 = - (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + (struct pl310_regs *)CFG_SYS_PL310_BASE; static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base = (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS; @@ -256,7 +256,7 @@ void dram_bank_mmu_setup(int bank) /* If we're still in OCRAM, don't set the XN bit on it */ if (!(gd->flags & GD_FLG_RELOC)) { set_section_dcache( - CONFIG_SYS_INIT_RAM_ADDR >> MMU_SECTION_SHIFT, + CFG_SYS_INIT_RAM_ADDR >> MMU_SECTION_SHIFT, DCACHE_WRITETHROUGH); } diff --git a/arch/arm/mach-socfpga/misc_gen5.c b/arch/arm/mach-socfpga/misc_gen5.c index 4edf4f9b5c..e7500c16f7 100644 --- a/arch/arm/mach-socfpga/misc_gen5.c +++ b/arch/arm/mach-socfpga/misc_gen5.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; static struct pl310_regs *const pl310 = - (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + (struct pl310_regs *)CFG_SYS_PL310_BASE; static struct nic301_registers *nic301_regs = (struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS; static struct scu_registers *scu_regs = diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c index 2c567edd50..9edbbf4a29 100644 --- a/arch/arm/mach-socfpga/spl_a10.c +++ b/arch/arm/mach-socfpga/spl_a10.c @@ -41,7 +41,7 @@ DECLARE_GLOBAL_DATA_PTR; #define BOOTROM_SHARED_MEM_SIZE 0x800 /* 2KB */ -#define BOOTROM_SHARED_MEM_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ +#define BOOTROM_SHARED_MEM_ADDR (CFG_SYS_INIT_RAM_ADDR + \ SOCFPGA_PHYS_OCRAM_SIZE - \ BOOTROM_SHARED_MEM_SIZE) #define RST_STATUS_SHARED_ADDR (BOOTROM_SHARED_MEM_ADDR + 0x438) diff --git a/arch/arm/mach-socfpga/timer.c b/arch/arm/mach-socfpga/timer.c index a58f1cf9d3..d9e8c84bfc 100644 --- a/arch/arm/mach-socfpga/timer.c +++ b/arch/arm/mach-socfpga/timer.c @@ -10,7 +10,7 @@ #define TIMER_LOAD_VAL 0xFFFFFFFF -static const struct socfpga_timer *timer_base = (void *)CONFIG_SYS_TIMERBASE; +static const struct socfpga_timer *timer_base = (void *)CFG_SYS_TIMERBASE; /* * Timer initialization diff --git a/arch/arm/mach-u8500/cache.c b/arch/arm/mach-u8500/cache.c index f9fd4fe7d3..05a91346a8 100644 --- a/arch/arm/mach-u8500/cache.c +++ b/arch/arm/mach-u8500/cache.c @@ -22,7 +22,7 @@ void enable_caches(void) #ifdef CONFIG_SYS_L2_PL310 void v7_outer_cache_disable(void) { - struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE; + struct pl310_regs *const pl310 = (struct pl310_regs *)CFG_SYS_PL310_BASE; /* * Linux expects the L2 cache to be turned off by the bootloader. diff --git a/arch/arm/mach-uniphier/arm32/timer.c b/arch/arm/mach-uniphier/arm32/timer.c index a40bdf1705..58247c2738 100644 --- a/arch/arm/mach-uniphier/arm32/timer.c +++ b/arch/arm/mach-uniphier/arm32/timer.c @@ -10,7 +10,7 @@ #include "arm-mpcore.h" #define PERIPHCLK (50 * 1000 * 1000) /* 50 MHz */ -#define PRESCALER ((PERIPHCLK) / (CONFIG_SYS_TIMER_RATE) - 1) +#define PRESCALER ((PERIPHCLK) / (CFG_SYS_TIMER_RATE) - 1) static void *get_global_timer_base(void) { diff --git a/arch/arm/mach-versatile/timer.c b/arch/arm/mach-versatile/timer.c index 739cb2997a..b471412186 100644 --- a/arch/arm/mach-versatile/timer.c +++ b/arch/arm/mach-versatile/timer.c @@ -36,9 +36,9 @@ int timer_init (void) ulong tmr_ctrl_val; /* 1st disable the Timer */ - tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); + tmr_ctrl_val = *(volatile ulong *)(CFG_SYS_TIMERBASE + 8); tmr_ctrl_val &= ~TIMER_ENABLE; - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; + *(volatile ulong *)(CFG_SYS_TIMERBASE + 8) = tmr_ctrl_val; /* * The Timer Control Register has one Undefined/Shouldn't Use Bit @@ -52,11 +52,11 @@ int timer_init (void) * Tmr Siz : 16 Bit Counter * Tmr in Wrapping Mode */ - tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); + tmr_ctrl_val = *(volatile ulong *)(CFG_SYS_TIMERBASE + 8); tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT ); tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S); - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; + *(volatile ulong *)(CFG_SYS_TIMERBASE + 8) = tmr_ctrl_val; return 0; } diff --git a/arch/m68k/cpu/mcf523x/cpu.c b/arch/m68k/cpu/mcf523x/cpu.c index e44656db5f..6d87908965 100644 --- a/arch/m68k/cpu/mcf523x/cpu.c +++ b/arch/m68k/cpu/mcf523x/cpu.c @@ -92,7 +92,7 @@ int watchdog_init(void) u32 wdog_module = 0; /* set timeout and enable watchdog */ - wdog_module = ((CONFIG_SYS_CLK / CONFIG_SYS_HZ) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module = ((CFG_SYS_CLK / CONFIG_SYS_HZ) * CONFIG_WATCHDOG_TIMEOUT); wdog_module |= (wdog_module / 8192); out_be16(&wdp->mr, wdog_module); diff --git a/arch/m68k/cpu/mcf523x/cpu_init.c b/arch/m68k/cpu/mcf523x/cpu_init.c index 87effa71dc..10be73822f 100644 --- a/arch/m68k/cpu/mcf523x/cpu_init.c +++ b/arch/m68k/cpu/mcf523x/cpu_init.c @@ -47,36 +47,36 @@ void cpu_init_f(void) out_be16(&wdog->cr, 0); #endif - out_be32(&scm->rambar, CONFIG_SYS_INIT_RAM_ADDR | SCM_RAMBAR_BDE); + out_be32(&scm->rambar, CFG_SYS_INIT_RAM_ADDR | SCM_RAMBAR_BDE); /* Port configuration */ out_8(&gpio->par_cs, 0); -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) - out_be_fbcs_reg(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be_fbcs_reg(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) && defined(CFG_SYS_CS0_CTRL)) + out_be_fbcs_reg(&fbcs->csar0, CFG_SYS_CS0_BASE); + out_be_fbcs_reg(&fbcs->cscr0, CFG_SYS_CS0_CTRL); + out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK); #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) && defined(CFG_SYS_CS1_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS_CS1); - out_be_fbcs_reg(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be_fbcs_reg(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); + out_be_fbcs_reg(&fbcs->csar1, CFG_SYS_CS1_BASE); + out_be_fbcs_reg(&fbcs->cscr1, CFG_SYS_CS1_CTRL); + out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) && defined(CFG_SYS_CS2_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS_CS2); - out_be_fbcs_reg(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be_fbcs_reg(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); + out_be_fbcs_reg(&fbcs->csar2, CFG_SYS_CS2_BASE); + out_be_fbcs_reg(&fbcs->cscr2, CFG_SYS_CS2_CTRL); + out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) && defined(CFG_SYS_CS3_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS_CS3); - out_be_fbcs_reg(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be_fbcs_reg(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); + out_be_fbcs_reg(&fbcs->csar3, CFG_SYS_CS3_BASE); + out_be_fbcs_reg(&fbcs->cscr3, CFG_SYS_CS3_CTRL); + out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) @@ -108,8 +108,8 @@ void cpu_init_f(void) #endif #ifdef CONFIG_SYS_I2C_FSL - CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR; - CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; + CFG_SYS_I2C_PINMUX_REG &= CFG_SYS_I2C_PINMUX_CLR; + CFG_SYS_I2C_PINMUX_REG |= CFG_SYS_I2C_PINMUX_SET; #endif icache_enable(); diff --git a/arch/m68k/cpu/mcf523x/speed.c b/arch/m68k/cpu/mcf523x/speed.c index f41f977d7f..6b08a12af0 100644 --- a/arch/m68k/cpu/mcf523x/speed.c +++ b/arch/m68k/cpu/mcf523x/speed.c @@ -29,7 +29,7 @@ int get_clocks(void) while (!(in_be32(&pll->synsr) & PLL_SYNSR_LOCK)) ; - gd->bus_clk = CONFIG_SYS_CLK; + gd->bus_clk = CFG_SYS_CLK; gd->cpu_clk = (gd->bus_clk * 2); #ifdef CONFIG_SYS_I2C_FSL diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index 4c9c96d783..d2a21c3279 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -91,10 +91,10 @@ _start: move.w #0x2700,%sr /* Mask off Interrupt */ /* Set vector base register at the beginning of the Flash */ - move.l #CONFIG_SYS_FLASH_BASE, %d0 + move.l #CFG_SYS_FLASH_BASE, %d0 movec %d0, %VBR - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 /* invalidate and disable cache */ @@ -116,7 +116,7 @@ _start: move.l #__got_start, %a5 /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE), %sp /* * if configured, malloc_f arena will be reserved first, diff --git a/arch/m68k/cpu/mcf52x2/cpu.c b/arch/m68k/cpu/mcf52x2/cpu.c index 8f72ef567f..d21d82fef7 100644 --- a/arch/m68k/cpu/mcf52x2/cpu.c +++ b/arch/m68k/cpu/mcf52x2/cpu.c @@ -132,11 +132,11 @@ int print_cpuinfo(void) if (cpu_model) printf("CPU: Freescale ColdFire MCF%s rev. %hu, at %s MHz\n", - cpu_model, prn, strmhz(buf, CONFIG_SYS_CLK)); + cpu_model, prn, strmhz(buf, CFG_SYS_CLK)); else printf("CPU: Unknown - Freescale ColdFire MCF5271 family" " (PIN: 0x%x) rev. %hu, at %s MHz\n", - pin, prn, strmhz(buf, CONFIG_SYS_CLK)); + pin, prn, strmhz(buf, CFG_SYS_CLK)); return 0; } @@ -284,7 +284,7 @@ int print_cpuinfo(void) char buf[32]; printf("CPU: Freescale Coldfire MCF5275 at %s MHz\n", - strmhz(buf, CONFIG_SYS_CLK)); + strmhz(buf, CFG_SYS_CLK)); return 0; }; #endif /* CONFIG_DISPLAY_CPUINFO */ @@ -370,7 +370,7 @@ int print_cpuinfo(void) char buf[32]; printf("CPU: Freescale Coldfire MCF5249 at %s MHz\n", - strmhz(buf, CONFIG_SYS_CLK)); + strmhz(buf, CFG_SYS_CLK)); return 0; } #endif /* CONFIG_DISPLAY_CPUINFO */ @@ -394,7 +394,7 @@ int print_cpuinfo(void) unsigned char resetsource = mbar_readLong(SIM_RSR); printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", - strmhz(buf, CONFIG_SYS_CLK)); + strmhz(buf, CFG_SYS_CLK)); if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { printf("Reset:%s%s\n", diff --git a/arch/m68k/cpu/mcf52x2/cpu_init.c b/arch/m68k/cpu/mcf52x2/cpu_init.c index 9d4a10f028..99eb61f167 100644 --- a/arch/m68k/cpu/mcf52x2/cpu_init.c +++ b/arch/m68k/cpu/mcf52x2/cpu_init.c @@ -36,31 +36,31 @@ void init_fbcs(void) { fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS); -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ - && defined(CONFIG_SYS_CS0_CTRL)) - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) \ + && defined(CFG_SYS_CS0_CTRL)) + out_be32(&fbcs->csar0, CFG_SYS_CS0_BASE); + out_be32(&fbcs->cscr0, CFG_SYS_CS0_CTRL); + out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK); #else #warning "Chip Select 0 are not initialized/used" #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ - && defined(CONFIG_SYS_CS1_CTRL)) - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) \ + && defined(CFG_SYS_CS1_CTRL)) + out_be32(&fbcs->csar1, CFG_SYS_CS1_BASE); + out_be32(&fbcs->cscr1, CFG_SYS_CS1_CTRL); + out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ - && defined(CONFIG_SYS_CS2_CTRL)) - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) \ + && defined(CFG_SYS_CS2_CTRL)) + out_be32(&fbcs->csar2, CFG_SYS_CS2_BASE); + out_be32(&fbcs->cscr2, CFG_SYS_CS2_CTRL); + out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ - && defined(CONFIG_SYS_CS3_CTRL)) - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) \ + && defined(CFG_SYS_CS3_CTRL)) + out_be32(&fbcs->csar3, CFG_SYS_CS3_BASE); + out_be32(&fbcs->cscr3, CFG_SYS_CS3_CTRL); + out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ && defined(CONFIG_SYS_CS4_CTRL)) @@ -214,9 +214,9 @@ void cpu_init_f(void) init_fbcs(); #ifdef CONFIG_SYS_I2C_FSL - CONFIG_SYS_I2C_PINMUX_REG = - CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR; - CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; + CFG_SYS_I2C_PINMUX_REG = + CFG_SYS_I2C_PINMUX_REG & CFG_SYS_I2C_PINMUX_CLR; + CFG_SYS_I2C_PINMUX_REG |= CFG_SYS_I2C_PINMUX_SET; #ifdef CONFIG_SYS_I2C2_OFFSET CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR; CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET; @@ -335,21 +335,21 @@ void cpu_init_f(void) * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR); + sysctrl_t *sysctrl = (sysctrl_t *) (CFG_SYS_MBAR); gpio_t *gpio = (gpio_t *) (MMAP_GPIO); csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS); - out_be16(&sysctrl->sc_scr, CONFIG_SYS_SCR); - out_be16(&sysctrl->sc_spr, CONFIG_SYS_SPR); + out_be16(&sysctrl->sc_scr, CFG_SYS_SCR); + out_be16(&sysctrl->sc_spr, CFG_SYS_SPR); /* Setup Ports: */ - out_be32(&gpio->gpio_pacnt, CONFIG_SYS_PACNT); - out_be16(&gpio->gpio_paddr, CONFIG_SYS_PADDR); - out_be16(&gpio->gpio_padat, CONFIG_SYS_PADAT); - out_be32(&gpio->gpio_pbcnt, CONFIG_SYS_PBCNT); - out_be16(&gpio->gpio_pbddr, CONFIG_SYS_PBDDR); - out_be16(&gpio->gpio_pbdat, CONFIG_SYS_PBDAT); - out_be32(&gpio->gpio_pdcnt, CONFIG_SYS_PDCNT); + out_be32(&gpio->gpio_pacnt, CFG_SYS_PACNT); + out_be16(&gpio->gpio_paddr, CFG_SYS_PADDR); + out_be16(&gpio->gpio_padat, CFG_SYS_PADAT); + out_be32(&gpio->gpio_pbcnt, CFG_SYS_PBCNT); + out_be16(&gpio->gpio_pbddr, CFG_SYS_PBDDR); + out_be16(&gpio->gpio_pbdat, CFG_SYS_PBDAT); + out_be32(&gpio->gpio_pdcnt, CFG_SYS_PDCNT); /* Memory Controller: */ out_be32(&csctrl->cs_br0, CONFIG_SYS_BR0_PRELIM); @@ -472,8 +472,8 @@ void cpu_init_f(void) #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_SYS_I2C_FSL - CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR; - CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; + CFG_SYS_I2C_PINMUX_REG &= CFG_SYS_I2C_PINMUX_CLR; + CFG_SYS_I2C_PINMUX_REG |= CFG_SYS_I2C_PINMUX_SET; #endif /* enable instruction cache now */ @@ -560,8 +560,8 @@ void cpu_init_f(void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ MCFCLOCK_SYNCR = - MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | - MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD); + MCFCLOCK_SYNCR_MFD(CFG_SYS_MFD) | + MCFCLOCK_SYNCR_RFD(CFG_SYS_RFD); while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; MCFGPIO_PBCDPAR = 0xc0; @@ -573,17 +573,17 @@ void cpu_init_f(void) #ifdef CONFIG_SYS_PFPAR MCFGPIO_PFPAR = CONFIG_SYS_PFPAR; #endif -#ifdef CONFIG_SYS_PJPAR - MCFGPIO_PJPAR = CONFIG_SYS_PJPAR; +#ifdef CFG_SYS_PJPAR + MCFGPIO_PJPAR = CFG_SYS_PJPAR; #endif #ifdef CONFIG_SYS_PSDPAR MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR; #endif -#ifdef CONFIG_SYS_PASPAR - MCFGPIO_PASPAR = CONFIG_SYS_PASPAR; +#ifdef CFG_SYS_PASPAR + MCFGPIO_PASPAR = CFG_SYS_PASPAR; #endif -#ifdef CONFIG_SYS_PEHLPAR - MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; +#ifdef CFG_SYS_PEHLPAR + MCFGPIO_PEHLPAR = CFG_SYS_PEHLPAR; #endif #ifdef CONFIG_SYS_PQSPAR MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR; @@ -600,15 +600,15 @@ void cpu_init_f(void) #ifdef CONFIG_SYS_PTDPAR MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR; #endif -#ifdef CONFIG_SYS_PUAPAR - MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR; +#ifdef CFG_SYS_PUAPAR + MCFGPIO_PUAPAR = CFG_SYS_PUAPAR; #endif #if defined(CONFIG_SYS_DDRD) MCFGPIO_DDRD = CONFIG_SYS_DDRD; #endif -#ifdef CONFIG_SYS_DDRUA - MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; +#ifdef CFG_SYS_DDRUA + MCFGPIO_DDRUA = CFG_SYS_DDRUA; #endif /* FlexBus Chipselect */ @@ -652,10 +652,10 @@ int fecpin_setclear(fec_info_t *info, int setclear) { if (setclear) { MCFGPIO_PASPAR |= 0x0F00; - MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; + MCFGPIO_PEHLPAR = CFG_SYS_PEHLPAR; } else { MCFGPIO_PASPAR &= 0xF0FF; - MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR; + MCFGPIO_PEHLPAR &= ~CFG_SYS_PEHLPAR; } return 0; } @@ -678,12 +678,12 @@ void cpu_init_f(void) * which is their primary function. * ~Jeremy */ - mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC); - mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC); - mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN); - mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN); - mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT); - mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT); + mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_SYS_GPIO_FUNC); + mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_SYS_GPIO1_FUNC); + mbar2_writeLong(MCFSIM_GPIO_EN, CFG_SYS_GPIO_EN); + mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_SYS_GPIO1_EN); + mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_SYS_GPIO_OUT); + mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_SYS_GPIO1_OUT); /* * dBug Compliance: diff --git a/arch/m68k/cpu/mcf52x2/speed.c b/arch/m68k/cpu/mcf52x2/speed.c index 045908a13d..6c7628252b 100644 --- a/arch/m68k/cpu/mcf52x2/speed.c +++ b/arch/m68k/cpu/mcf52x2/speed.c @@ -23,19 +23,19 @@ int get_clocks(void) #if defined(CONFIG_M5208) pll_t *pll = (pll_t *) MMAP_PLL; - out_8(&pll->odr, CONFIG_SYS_PLL_ODR); - out_8(&pll->fdr, CONFIG_SYS_PLL_FDR); + out_8(&pll->odr, CFG_SYS_PLL_ODR); + out_8(&pll->fdr, CFG_SYS_PLL_FDR); #endif #if defined(CONFIG_M5249) || defined(CONFIG_M5253) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; -#ifndef CONFIG_SYS_PLL_BYPASS +#ifndef CFG_SYS_PLL_BYPASS #ifdef CONFIG_M5249 /* Setup the PLL to run at the specified speed */ -#ifdef CONFIG_SYS_FAST_CLK +#ifdef CFG_SYS_FAST_CLK pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ #else pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ @@ -43,7 +43,7 @@ int get_clocks(void) #endif /* CONFIG_M5249 */ #ifdef CONFIG_M5253 - pllcr = CONFIG_SYS_PLLCR; + pllcr = CFG_SYS_PLLCR; #endif /* CONFIG_M5253 */ cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ @@ -52,7 +52,7 @@ int get_clocks(void) pllcr ^= 0x00000001; /* Set pll bypass to 1 */ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CONFIG_SYS_PLL_BYPASS */ +#endif /* #ifndef CFG_SYS_PLL_BYPASS */ #endif /* CONFIG_M5249 || CONFIG_M5253 */ @@ -68,7 +68,7 @@ int get_clocks(void) ; #endif - gd->cpu_clk = CONFIG_SYS_CLK; + gd->cpu_clk = CFG_SYS_CLK; #if defined(CONFIG_M5208) || defined(CONFIG_M5249) || defined(CONFIG_M5253) || \ defined(CONFIG_M5271) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index 6dddbe76f3..d48d0192ee 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -35,7 +35,7 @@ */ _vectors: .long 0x00000000 /* Flash offset is 0 until we setup CS0 */ -#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) +#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) .long _start - CONFIG_TEXT_BASE #else .long _START @@ -81,9 +81,9 @@ _vectors: .text -#if defined(CONFIG_SYS_INT_FLASH_BASE) && \ +#if defined(CFG_SYS_INT_FLASH_BASE) && \ (defined(CONFIG_M5282) || defined(CONFIG_M5281)) -#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) +#if (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) .long 0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */ .long 0xFFFFFFFF /* all sectors protected */ .long 0x00000000 /* supervisor/User restriction */ @@ -100,53 +100,53 @@ _start: #if defined(CONFIG_M5208) /* Initialize RAMBAR: locate SRAM and validate it */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 #endif #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) /* set MBAR address + valid flag */ - move.l #(CONFIG_SYS_MBAR + 1), %d0 + move.l #(CFG_SYS_MBAR + 1), %d0 move.c %d0, %MBAR /*** The 5249 has MBAR2 as well ***/ -#ifdef CONFIG_SYS_MBAR2 +#ifdef CFG_SYS_MBAR2 /* Get MBAR2 address */ - move.l #(CONFIG_SYS_MBAR2 + 1), %d0 + move.l #(CFG_SYS_MBAR2 + 1), %d0 /* Set MBAR2 */ movec %d0, #0xc0e #endif - move.l #(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + 1), %d0 movec %d0, %RAMBAR0 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* set MBAR address + valid flag */ - move.l #(CONFIG_SYS_MBAR + 1), %d0 + move.l #(CFG_SYS_MBAR + 1), %d0 move.l %d0, 0x40000000 /* Initialize RAMBAR1: locate SRAM and validate it */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + 0x21), %d0 movec %d0, %RAMBAR1 #if defined(CONFIG_M5282) -#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) +#if (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) /* * Setup code in SRAM to initialize FLASHBAR, * if start from internal Flash */ - move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0 - move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2 + move.l #(_flashbar_setup-CFG_SYS_INT_FLASH_BASE), %a0 + move.l #(_flashbar_setup_end-CFG_SYS_INT_FLASH_BASE), %a1 + move.l #(CFG_SYS_INIT_RAM_ADDR), %a2 _copy_flash: move.l (%a0)+, (%a2)+ cmp.l %a0, %a1 bgt.s _copy_flash - jmp CONFIG_SYS_INIT_RAM_ADDR + jmp CFG_SYS_INIT_RAM_ADDR _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ - move.l #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0 + move.l #(CFG_SYS_INT_FLASH_BASE + CFG_SYS_INT_FLASH_ENABLE), %d0 movec %d0, %FLASHBAR jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: @@ -154,9 +154,9 @@ _flashbar_setup_end: _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ - move.l #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0 + move.l #(CFG_SYS_INT_FLASH_BASE + CFG_SYS_INT_FLASH_ENABLE), %d0 movec %d0, %FLASHBAR -#endif /* (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */ +#endif /* (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) */ #endif #endif @@ -165,22 +165,22 @@ _after_flashbar_copy: * therefore no VBR to set */ #if !defined(CONFIG_MONITOR_IS_IN_RAM) -#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) - move.l #CONFIG_SYS_INT_FLASH_BASE, %d0 +#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) + move.l #CFG_SYS_INT_FLASH_BASE, %d0 #else - move.l #CONFIG_SYS_FLASH_BASE, %d0 + move.l #CFG_SYS_FLASH_BASE, %d0 #endif movec %d0, %VBR #endif #ifdef CONFIG_M5275 /* set MBAR address + valid flag */ - move.l #(CONFIG_SYS_MBAR + 1), %d0 + move.l #(CFG_SYS_MBAR + 1), %d0 move.l %d0, 0x40000000 /* movec %d0, %MBAR */ /* Initialize RAMBAR: locate SRAM and validate it */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + 0x21), %d0 movec %d0, %RAMBAR1 #endif @@ -195,7 +195,7 @@ _after_flashbar_copy: move.l #__got_start, %a5 /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE), %sp /* * if configured, malloc_f arena will be reserved first, diff --git a/arch/m68k/cpu/mcf530x/cpu.c b/arch/m68k/cpu/mcf530x/cpu.c index 0659bf6558..53a25d8362 100644 --- a/arch/m68k/cpu/mcf530x/cpu.c +++ b/arch/m68k/cpu/mcf530x/cpu.c @@ -33,7 +33,7 @@ int print_cpuinfo(void) char buf[32]; printf("CPU: Freescale Coldfire MCF5307 at %s MHz\n", - strmhz(buf, CONFIG_SYS_CPU_CLK)); + strmhz(buf, CFG_SYS_CPU_CLK)); return 0; } #endif /* CONFIG_DISPLAY_CPUINFO */ diff --git a/arch/m68k/cpu/mcf530x/cpu_init.c b/arch/m68k/cpu/mcf530x/cpu_init.c index 83529408eb..dad47d87ab 100644 --- a/arch/m68k/cpu/mcf530x/cpu_init.c +++ b/arch/m68k/cpu/mcf530x/cpu_init.c @@ -40,35 +40,35 @@ void init_csm(void) { csm_t *csm = (csm_t *)(MMAP_CSM); -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && \ - defined(CONFIG_SYS_CS0_CTRL)) - out_be16(&csm->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&csm->csmr0, CONFIG_SYS_CS0_MASK); - out_be16(&csm->cscr0, CONFIG_SYS_CS0_CTRL); - MCF5307_SP_ERR_FIX(CONFIG_SYS_CS0_BASE, csm->csmr0); +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) && \ + defined(CFG_SYS_CS0_CTRL)) + out_be16(&csm->csar0, CFG_SYS_CS0_BASE); + out_be32(&csm->csmr0, CFG_SYS_CS0_MASK); + out_be16(&csm->cscr0, CFG_SYS_CS0_CTRL); + MCF5307_SP_ERR_FIX(CFG_SYS_CS0_BASE, csm->csmr0); #else #warning "Chip Select 0 are not initialized/used" #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && \ - defined(CONFIG_SYS_CS1_CTRL)) - out_be16(&csm->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&csm->csmr1, CONFIG_SYS_CS1_MASK); - out_be16(&csm->cscr1, CONFIG_SYS_CS1_CTRL); - MCF5307_SP_ERR_FIX(CONFIG_SYS_CS1_BASE, csm->csmr1); +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) && \ + defined(CFG_SYS_CS1_CTRL)) + out_be16(&csm->csar1, CFG_SYS_CS1_BASE); + out_be32(&csm->csmr1, CFG_SYS_CS1_MASK); + out_be16(&csm->cscr1, CFG_SYS_CS1_CTRL); + MCF5307_SP_ERR_FIX(CFG_SYS_CS1_BASE, csm->csmr1); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && \ - defined(CONFIG_SYS_CS2_CTRL)) - out_be16(&csm->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&csm->csmr2, CONFIG_SYS_CS2_MASK); - out_be16(&csm->cscr2, CONFIG_SYS_CS2_CTRL); - MCF5307_SP_ERR_FIX(CONFIG_SYS_CS2_BASE, csm->csmr2); +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) && \ + defined(CFG_SYS_CS2_CTRL)) + out_be16(&csm->csar2, CFG_SYS_CS2_BASE); + out_be32(&csm->csmr2, CFG_SYS_CS2_MASK); + out_be16(&csm->cscr2, CFG_SYS_CS2_CTRL); + MCF5307_SP_ERR_FIX(CFG_SYS_CS2_BASE, csm->csmr2); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && \ - defined(CONFIG_SYS_CS3_CTRL)) - out_be16(&csm->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&csm->csmr3, CONFIG_SYS_CS3_MASK); - out_be16(&csm->cscr3, CONFIG_SYS_CS3_CTRL); - MCF5307_SP_ERR_FIX(CONFIG_SYS_CS3_BASE, csm->csmr3); +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) && \ + defined(CFG_SYS_CS3_CTRL)) + out_be16(&csm->csar3, CFG_SYS_CS3_BASE); + out_be32(&csm->csmr3, CFG_SYS_CS3_MASK); + out_be16(&csm->cscr3, CFG_SYS_CS3_CTRL); + MCF5307_SP_ERR_FIX(CFG_SYS_CS3_BASE, csm->csmr3); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && \ defined(CONFIG_SYS_CS4_CTRL)) diff --git a/arch/m68k/cpu/mcf530x/speed.c b/arch/m68k/cpu/mcf530x/speed.c index 03d9abeb18..c8d079016f 100644 --- a/arch/m68k/cpu/mcf530x/speed.c +++ b/arch/m68k/cpu/mcf530x/speed.c @@ -16,8 +16,8 @@ DECLARE_GLOBAL_DATA_PTR; int get_clocks(void) { #if defined(CONFIG_M5307) - gd->bus_clk = CONFIG_SYS_CLK; - gd->cpu_clk = CONFIG_SYS_CPU_CLK; + gd->bus_clk = CFG_SYS_CLK; + gd->cpu_clk = CFG_SYS_CPU_CLK; #endif return 0; diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S index 644c372bdd..dbe2b54e41 100644 --- a/arch/m68k/cpu/mcf530x/start.S +++ b/arch/m68k/cpu/mcf530x/start.S @@ -39,7 +39,7 @@ _vectors: /* Flash offset is 0 until we setup CS0 */ .long 0x00000000 #if defined(CONFIG_M5307) && \ - (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) + (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) .long _start - CONFIG_TEXT_BASE #else .long _START @@ -92,10 +92,10 @@ _start: move.w #0x2700,%sr /* set MBAR address + valid flag */ - move.l #(CONFIG_SYS_MBAR + 1), %d0 + move.l #(CFG_SYS_MBAR + 1), %d0 move.c %d0, %MBAR - move.l #(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + 1), %d0 move.c %d0, %RAMBAR /* DS 4.8.2 (Cache Organization) invalidate and disable cache */ @@ -110,7 +110,7 @@ _start: * therefore no VBR to set */ #if !defined(CONFIG_MONITOR_IS_IN_RAM) - move.l #CONFIG_SYS_FLASH_BASE, %d0 + move.l #CFG_SYS_FLASH_BASE, %d0 movec %d0, %VBR #endif @@ -125,7 +125,7 @@ _start: move.l #__got_start, %a5 /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE), %sp /* * if configured, malloc_f arena will be reserved first, diff --git a/arch/m68k/cpu/mcf532x/cpu.c b/arch/m68k/cpu/mcf532x/cpu.c index 1dadffd4ca..8a48d73475 100644 --- a/arch/m68k/cpu/mcf532x/cpu.c +++ b/arch/m68k/cpu/mcf532x/cpu.c @@ -131,7 +131,7 @@ int watchdog_init(void) u32 wdog_module = 0; /* set timeout and enable watchdog */ - wdog_module = ((CONFIG_SYS_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); + wdog_module = ((CFG_SYS_CLK / 1000) * CONFIG_WATCHDOG_TIMEOUT); #ifdef CONFIG_M5329 out_be16(&wdp->mr, wdog_module / 8192); #else diff --git a/arch/m68k/cpu/mcf532x/cpu_init.c b/arch/m68k/cpu/mcf532x/cpu_init.c index 1311f3967c..844d2cd760 100644 --- a/arch/m68k/cpu/mcf532x/cpu_init.c +++ b/arch/m68k/cpu/mcf532x/cpu_init.c @@ -37,34 +37,34 @@ void cpu_init_f(void) out_be32(&scm1->pacrf, 0); out_be32(&scm1->pacrg, 0); -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ - && defined(CONFIG_SYS_CS0_CTRL)) +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) \ + && defined(CFG_SYS_CS0_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS0_CS0); - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); + out_be32(&fbcs->csar0, CFG_SYS_CS0_BASE); + out_be32(&fbcs->cscr0, CFG_SYS_CS0_CTRL); + out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK); #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ - && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) \ + && defined(CFG_SYS_CS1_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS1_CS1); - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); + out_be32(&fbcs->csar1, CFG_SYS_CS1_BASE); + out_be32(&fbcs->cscr1, CFG_SYS_CS1_CTRL); + out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ - && defined(CONFIG_SYS_CS2_CTRL)) - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) \ + && defined(CFG_SYS_CS2_CTRL)) + out_be32(&fbcs->csar2, CFG_SYS_CS2_BASE); + out_be32(&fbcs->cscr2, CFG_SYS_CS2_CTRL); + out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ - && defined(CONFIG_SYS_CS3_CTRL)) - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) \ + && defined(CFG_SYS_CS3_CTRL)) + out_be32(&fbcs->csar3, CFG_SYS_CS3_BASE); + out_be32(&fbcs->cscr3, CFG_SYS_CS3_CTRL); + out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ @@ -102,8 +102,8 @@ int cpu_init_r(void) rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE); rtcex_t *rtcex = (rtcex_t *) &rtc->extended; - out_be32(&rtcex->gocu, CONFIG_SYS_RTC_CNT); - out_be32(&rtcex->gocl, CONFIG_SYS_RTC_SETUP); + out_be32(&rtcex->gocu, CFG_SYS_RTC_CNT); + out_be32(&rtcex->gocl, CFG_SYS_RTC_SETUP); #endif #ifdef CONFIG_MCFFEC @@ -236,36 +236,36 @@ void cpu_init_f(void) /* Port configuration */ out_8(&gpio->par_cs, 0); -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \ - && defined(CONFIG_SYS_CS0_CTRL)) - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) \ + && defined(CFG_SYS_CS0_CTRL)) + out_be32(&fbcs->csar0, CFG_SYS_CS0_BASE); + out_be32(&fbcs->cscr0, CFG_SYS_CS0_CTRL); + out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK); #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \ - && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) \ + && defined(CFG_SYS_CS1_CTRL)) /* Latch chipselect */ setbits_8(&gpio->par_cs, GPIO_PAR_CS1); - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); + out_be32(&fbcs->csar1, CFG_SYS_CS1_BASE); + out_be32(&fbcs->cscr1, CFG_SYS_CS1_CTRL); + out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \ - && defined(CONFIG_SYS_CS2_CTRL)) +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) \ + && defined(CFG_SYS_CS2_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS2); - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); + out_be32(&fbcs->csar2, CFG_SYS_CS2_BASE); + out_be32(&fbcs->cscr2, CFG_SYS_CS2_CTRL); + out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \ - && defined(CONFIG_SYS_CS3_CTRL)) +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) \ + && defined(CFG_SYS_CS3_CTRL)) setbits_8(&gpio->par_cs, GPIO_PAR_CS3); - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); + out_be32(&fbcs->csar3, CFG_SYS_CS3_BASE); + out_be32(&fbcs->cscr3, CFG_SYS_CS3_CTRL); + out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \ @@ -327,7 +327,7 @@ void uart_port_conf(int port) clrbits_8(&gpio->par_feci2c, 0x00ff); setbits_8(&gpio->par_feci2c, GPIO_PAR_FECI2C_SCL_UTXD2 | GPIO_PAR_FECI2C_SDA_URXD2); -#elif defined(CONFIG_SYS_UART2_ALT3_GPIO) +#elif defined(CFG_SYS_UART2_ALT3_GPIO) clrbits_be16(&gpio->par_ssi, 0x0f00); setbits_be16(&gpio->par_ssi, GPIO_PAR_SSI_RXD(2) | GPIO_PAR_SSI_TXD(2)); diff --git a/arch/m68k/cpu/mcf532x/speed.c b/arch/m68k/cpu/mcf532x/speed.c index dac2229f72..32ffac0813 100644 --- a/arch/m68k/cpu/mcf532x/speed.c +++ b/arch/m68k/cpu/mcf532x/speed.c @@ -252,7 +252,7 @@ int clock_pll(int fsys, int flags) /* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks(void) { - gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000; + gd->bus_clk = clock_pll(CFG_SYS_CLK / 1000, 0) * 1000; gd->cpu_clk = (gd->bus_clk * 3); #ifdef CONFIG_SYS_I2C_FSL diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index 2672891916..72a2f99b7d 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -98,11 +98,11 @@ _start: #if !defined(CONFIG_MONITOR_IS_IN_RAM) /* Set vector base register at the beginning of the Flash */ - move.l #CONFIG_SYS_FLASH_BASE, %d0 + move.l #CFG_SYS_FLASH_BASE, %d0 movec %d0, %VBR #endif - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 /* invalidate and disable cache */ @@ -131,7 +131,7 @@ _start: move.l #__got_start, %a5 /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE), %sp /* * if configured, malloc_f arena will be reserved first, diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c index 9b3f9f0fe1..1ce244872f 100644 --- a/arch/m68k/cpu/mcf5445x/cpu_init.c +++ b/arch/m68k/cpu/mcf5445x/cpu_init.c @@ -29,30 +29,30 @@ void init_fbcs(void) fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; #if !defined(CONFIG_SERIAL_BOOT) -#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) - out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); - out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); - out_be32(&fbcs->csmr0, CONFIG_SYS_CS0_MASK); +#if (defined(CFG_SYS_CS0_BASE) && defined(CFG_SYS_CS0_MASK) && defined(CFG_SYS_CS0_CTRL)) + out_be32(&fbcs->csar0, CFG_SYS_CS0_BASE); + out_be32(&fbcs->cscr0, CFG_SYS_CS0_CTRL); + out_be32(&fbcs->csmr0, CFG_SYS_CS0_MASK); #endif #endif -#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL)) +#if (defined(CFG_SYS_CS1_BASE) && defined(CFG_SYS_CS1_MASK) && defined(CFG_SYS_CS1_CTRL)) /* Latch chipselect */ - out_be32(&fbcs->csar1, CONFIG_SYS_CS1_BASE); - out_be32(&fbcs->cscr1, CONFIG_SYS_CS1_CTRL); - out_be32(&fbcs->csmr1, CONFIG_SYS_CS1_MASK); + out_be32(&fbcs->csar1, CFG_SYS_CS1_BASE); + out_be32(&fbcs->cscr1, CFG_SYS_CS1_CTRL); + out_be32(&fbcs->csmr1, CFG_SYS_CS1_MASK); #endif -#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL)) - out_be32(&fbcs->csar2, CONFIG_SYS_CS2_BASE); - out_be32(&fbcs->cscr2, CONFIG_SYS_CS2_CTRL); - out_be32(&fbcs->csmr2, CONFIG_SYS_CS2_MASK); +#if (defined(CFG_SYS_CS2_BASE) && defined(CFG_SYS_CS2_MASK) && defined(CFG_SYS_CS2_CTRL)) + out_be32(&fbcs->csar2, CFG_SYS_CS2_BASE); + out_be32(&fbcs->cscr2, CFG_SYS_CS2_CTRL); + out_be32(&fbcs->csmr2, CFG_SYS_CS2_MASK); #endif -#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL)) - out_be32(&fbcs->csar3, CONFIG_SYS_CS3_BASE); - out_be32(&fbcs->cscr3, CONFIG_SYS_CS3_CTRL); - out_be32(&fbcs->csmr3, CONFIG_SYS_CS3_MASK); +#if (defined(CFG_SYS_CS3_BASE) && defined(CFG_SYS_CS3_MASK) && defined(CFG_SYS_CS3_CTRL)) + out_be32(&fbcs->csar3, CFG_SYS_CS3_BASE); + out_be32(&fbcs->cscr3, CFG_SYS_CS3_CTRL); + out_be32(&fbcs->csmr3, CFG_SYS_CS3_MASK); #endif #if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL)) @@ -208,14 +208,14 @@ void cpu_init_f(void) /* FlexBus Chipselect */ init_fbcs(); -#ifdef CONFIG_SYS_CS0_BASE +#ifdef CFG_SYS_CS0_BASE /* * now the flash base address is no longer at 0 (Newer ColdFire family * boot at address 0 instead of 0xFFnn_nnnn). The vector table must * also move to the new location. */ - if (CONFIG_SYS_CS0_BASE != 0) - setvbr(CONFIG_SYS_CS0_BASE); + if (CFG_SYS_CS0_BASE != 0) + setvbr(CFG_SYS_CS0_BASE); #endif icache_enable(); diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index aea8f3090f..a083c3d45d 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -27,10 +27,10 @@ #if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) + CFG_SYS_INIT_RAM_ADDR) #define ASM_DRAMINIT_N (asm_dram_init - CONFIG_TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_TEXT_BASE + \ - CONFIG_SYS_INIT_RAM_ADDR) + CFG_SYS_INIT_RAM_ADDR) #endif .text @@ -123,18 +123,18 @@ asm_dram_init: #ifdef CONFIG_SYS_NAND_BOOT /* for assembly stack */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- #endif #ifdef CONFIG_CF_SBF - move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 + move.l #CFG_SYS_INIT_RAM_ADDR, %d0 movec %d0, %VBR - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 /* initialize general use internal ram */ @@ -145,7 +145,7 @@ asm_dram_init: move.l %d0, (%a2) /* invalidate and disable cache */ - move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 + move.l #(CFG_SYS_ICACHE_INV + CFG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -153,17 +153,17 @@ asm_dram_init: movec %d0, %ACR2 movec %d0, %ACR3 - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- -#ifdef CONFIG_SYS_CS0_BASE +#ifdef CFG_SYS_CS0_BASE /* Must disable global address */ move.l #0xFC008000, %a1 - move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #(CFG_SYS_CS0_BASE), (%a1) move.l #0xFC008008, %a1 - move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #(CFG_SYS_CS0_CTRL), (%a1) move.l #0xFC008004, %a1 - move.l #(CONFIG_SYS_CS0_MASK), (%a1) + move.l #(CFG_SYS_CS0_MASK), (%a1) #endif #endif /* CONFIG_CF_SBF */ @@ -216,8 +216,8 @@ asm_dspi_init: move.l (%a1)+, %d5 move.l (%a1), %a4 - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 - move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_SBFHDR_DATA_OFFSET), %a0 + move.l #(CFG_SYS_SBFHDR_SIZE), %d4 move.l #0xFC05C02C, %a1 /* dspi status */ @@ -334,14 +334,14 @@ asm_nand_init: movec %d0, %ACR2 movec %d0, %ACR3 -#ifdef CONFIG_SYS_CS0_BASE +#ifdef CFG_SYS_CS0_BASE /* Must disable global address */ move.l #0xFC008000, %a1 - move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #(CFG_SYS_CS0_BASE), (%a1) move.l #0xFC008008, %a1 - move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #(CFG_SYS_CS0_CTRL), (%a1) move.l #0xFC008004, %a1 - move.l #(CONFIG_SYS_CS0_MASK), (%a1) + move.l #(CFG_SYS_CS0_MASK), (%a1) #endif /* NAND port configuration */ @@ -442,10 +442,10 @@ _start: move.w #0x2700,%sr /* Mask off Interrupt */ /* Set vector base register at the beginning of the Flash */ - move.l #CONFIG_SYS_FLASH_BASE, %d0 + move.l #CFG_SYS_FLASH_BASE, %d0 movec %d0, %VBR - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 /* initialize general use internal ram */ @@ -456,7 +456,7 @@ _start: move.l %d0, (%a2) /* invalidate and disable cache */ - move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 + move.l #(CFG_SYS_ICACHE_INV + CFG_SYS_DCACHE_INV), %d0 movec %d0, %CACR /* Invalidate cache */ move.l #0, %d0 movec %d0, %ACR0 @@ -464,7 +464,7 @@ _start: movec %d0, %ACR2 movec %d0, %ACR3 #else - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_CTRL), %d0 movec %d0, %RAMBAR1 #endif @@ -472,7 +472,7 @@ _start: move.l #__got_start, %a5 /* setup stack initially on top of internal static ram */ - move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE), %sp + move.l #(CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE), %sp /* * if configured, malloc_f arena will be reserved first, diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index ceb462f438..c05356fc93 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -135,28 +135,28 @@ #endif /* CONFIG_CF_V4 */ -#ifndef CONFIG_SYS_CACHE_ICACR -#define CONFIG_SYS_CACHE_ICACR 0 +#ifndef CFG_SYS_CACHE_ICACR +#define CFG_SYS_CACHE_ICACR 0 #endif -#ifndef CONFIG_SYS_CACHE_DCACR -#ifdef CONFIG_SYS_CACHE_ICACR -#define CONFIG_SYS_CACHE_DCACR CONFIG_SYS_CACHE_ICACR +#ifndef CFG_SYS_CACHE_DCACR +#ifdef CFG_SYS_CACHE_ICACR +#define CFG_SYS_CACHE_DCACR CFG_SYS_CACHE_ICACR #else -#define CONFIG_SYS_CACHE_DCACR 0 +#define CFG_SYS_CACHE_DCACR 0 #endif #endif -#ifndef CONFIG_SYS_CACHE_ACR0 -#define CONFIG_SYS_CACHE_ACR0 0 +#ifndef CFG_SYS_CACHE_ACR0 +#define CFG_SYS_CACHE_ACR0 0 #endif -#ifndef CONFIG_SYS_CACHE_ACR1 -#define CONFIG_SYS_CACHE_ACR1 0 +#ifndef CFG_SYS_CACHE_ACR1 +#define CFG_SYS_CACHE_ACR1 0 #endif -#ifndef CONFIG_SYS_CACHE_ACR2 -#define CONFIG_SYS_CACHE_ACR2 0 +#ifndef CFG_SYS_CACHE_ACR2 +#define CFG_SYS_CACHE_ACR2 0 #endif #ifndef CONFIG_SYS_CACHE_ACR3 diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index 672aa0bb14..dab8b26a70 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -14,7 +14,7 @@ #include <asm/m520x.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ #ifdef CONFIG_MCFTMR @@ -37,7 +37,7 @@ #include <asm/m5235.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) /* Timer */ #ifdef CONFIG_MCFTMR @@ -59,7 +59,7 @@ #include <asm/immap_5249.h> #include <asm/m5249.h> -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC) #define CONFIG_SYS_NUM_IRQS (64) @@ -82,7 +82,7 @@ #include <asm/m5249.h> #include <asm/m5253.h> -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC) #define CONFIG_SYS_NUM_IRQS (64) @@ -105,7 +105,7 @@ #include <asm/m5271.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) /* Timer */ #ifdef CONFIG_MCFTMR @@ -128,7 +128,7 @@ #include <asm/m5272.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC) #define CONFIG_SYS_NUM_IRQS (64) @@ -152,7 +152,7 @@ #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) #define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC0) #define CONFIG_SYS_NUM_IRQS (192) @@ -175,7 +175,7 @@ #include <asm/m5282.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x40)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC0) #define CONFIG_SYS_NUM_IRQS (128) @@ -198,7 +198,7 @@ #include <asm/m5307.h> #define CONFIG_SYS_UART_BASE (MMAP_UART0 + \ - (CONFIG_SYS_UART_PORT * 0x40)) + (CFG_SYS_UART_PORT * 0x40)) #define CONFIG_SYS_INTR_BASE (MMAP_INTC) #define CONFIG_SYS_NUM_IRQS (64) @@ -223,7 +223,7 @@ #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) #define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ #ifdef CONFIG_MCFTMR @@ -246,7 +246,7 @@ #include <asm/m5329.h> #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC) -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x4000)) /* Timer */ #ifdef CONFIG_MCFTMR @@ -271,12 +271,12 @@ #define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) #define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) -#if (CONFIG_SYS_UART_PORT < 4) +#if (CFG_SYS_UART_PORT < 4) #define CONFIG_SYS_UART_BASE (MMAP_UART0 + \ - (CONFIG_SYS_UART_PORT * 0x4000)) + (CFG_SYS_UART_PORT * 0x4000)) #else #define CONFIG_SYS_UART_BASE (MMAP_UART4 + \ - ((CONFIG_SYS_UART_PORT - 4) * 0x4000)) + ((CFG_SYS_UART_PORT - 4) * 0x4000)) #endif #define MMAP_DSPI MMAP_DSPI0 @@ -320,7 +320,7 @@ #define FEC1_TX_INIT 31 #endif -#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x100)) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + (CFG_SYS_UART_PORT * 0x100)) #ifdef CONFIG_SLTTMR #define CONFIG_SYS_UDELAY_BASE (MMAP_SLT1) @@ -339,7 +339,7 @@ #ifdef CONFIG_PCI #define CFG_SYS_PCI_BAR0 (0x40000000) #define CFG_SYS_PCI_BAR1 (CFG_SYS_SDRAM_BASE) -#define CFG_SYS_PCI_TBATR0 (CONFIG_SYS_MBAR) +#define CFG_SYS_PCI_TBATR0 (CFG_SYS_MBAR) #define CFG_SYS_PCI_TBATR1 (CFG_SYS_SDRAM_BASE) #endif #endif /* CONFIG_M547x */ diff --git a/arch/m68k/include/asm/immap_520x.h b/arch/m68k/include/asm/immap_520x.h index bb1237453f..7c7443b968 100644 --- a/arch/m68k/include/asm/immap_520x.h +++ b/arch/m68k/include/asm/immap_520x.h @@ -9,32 +9,32 @@ #ifndef __IMMAP_520X__ #define __IMMAP_520X__ -#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000) -#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00030000) -#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040000) -#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00054000) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x0005C000) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000) -#define MMAP_EPORT0 (CONFIG_SYS_MBAR + 0x00088000) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x0008C000) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00090000) -#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000A8000) +#define MMAP_SCM1 (CFG_SYS_MBAR + 0x00000000) +#define MMAP_XBS (CFG_SYS_MBAR + 0x00004000) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00008000) +#define MMAP_FEC0 (CFG_SYS_MBAR + 0x00030000) +#define MMAP_SCM2 (CFG_SYS_MBAR + 0x00040000) +#define MMAP_EDMA (CFG_SYS_MBAR + 0x00044000) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00048000) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00054000) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00058000) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x0005C000) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00060000) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00064000) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00068000) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00070000) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00074000) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00078000) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x0007C000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00080000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00084000) +#define MMAP_EPORT0 (CFG_SYS_MBAR + 0x00088000) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x0008C000) +#define MMAP_PLL (CFG_SYS_MBAR + 0x00090000) +#define MMAP_RCM (CFG_SYS_MBAR + 0x000A0000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x000A0004) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x000A4000) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x000A8000) #include <asm/coldfire/crossbar.h> #include <asm/coldfire/edma.h> diff --git a/arch/m68k/include/asm/immap_5235.h b/arch/m68k/include/asm/immap_5235.h index 27d905ef94..a1825c2a94 100644 --- a/arch/m68k/include/asm/immap_5235.h +++ b/arch/m68k/include/asm/immap_5235.h @@ -9,42 +9,42 @@ #ifndef __IMMAP_5235__ #define __IMMAP_5235__ -#define MMAP_SCM (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DMA0 (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_DMA1 (CONFIG_SYS_MBAR + 0x00000110) -#define MMAP_DMA2 (CONFIG_SYS_MBAR + 0x00000120) -#define MMAP_DMA3 (CONFIG_SYS_MBAR + 0x00000130) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000240) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00000300) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000340) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000400) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000440) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00000480) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x000004C0) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000C00) -#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x00000D00) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00000F00) -#define MMAP_FEC (CONFIG_SYS_MBAR + 0x00001000) -#define MMAP_FECFIFO (CONFIG_SYS_MBAR + 0x00001400) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00100000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x00110000) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00120000) -#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00130000) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x00140000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00150000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00160000) -#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00170000) -#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x00180000) -#define MMAP_MDHA (CONFIG_SYS_MBAR + 0x00190000) -#define MMAP_RNG (CONFIG_SYS_MBAR + 0x001A0000) -#define MMAP_SKHA (CONFIG_SYS_MBAR + 0x001B0000) -#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x001C0000) -#define MMAP_ETPU (CONFIG_SYS_MBAR + 0x001D0000) -#define MMAP_CAN2 (CONFIG_SYS_MBAR + 0x001F0000) +#define MMAP_SCM (CFG_SYS_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_SYS_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_SYS_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_SYS_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_SYS_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00000280) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_SYS_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_SYS_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_SYS_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00100000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x00110000) +#define MMAP_PLL (CFG_SYS_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_SYS_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_SYS_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_SYS_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_SYS_MBAR + 0x00190000) +#define MMAP_RNG (CFG_SYS_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_SYS_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_SYS_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_SYS_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_SYS_MBAR + 0x001F0000) #include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> diff --git a/arch/m68k/include/asm/immap_5249.h b/arch/m68k/include/asm/immap_5249.h index b599ca6e81..aa4c3ef42f 100644 --- a/arch/m68k/include/asm/immap_5249.h +++ b/arch/m68k/include/asm/immap_5249.h @@ -8,13 +8,13 @@ #ifndef __IMMAP_5249__ #define __IMMAP_5249__ -#define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000140) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000180) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x000001C0) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000400) +#define MMAP_INTC (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000400) #include <asm/coldfire/flexbus.h> #include <asm/coldfire/qspi.h> diff --git a/arch/m68k/include/asm/immap_5253.h b/arch/m68k/include/asm/immap_5253.h index 883782aa97..1ab7243dfd 100644 --- a/arch/m68k/include/asm/immap_5253.h +++ b/arch/m68k/include/asm/immap_5253.h @@ -9,20 +9,20 @@ #ifndef __IMMAP_5253__ #define __IMMAP_5253__ -#define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000140) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000180) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x000001C0) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_I2C0 (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000400) -#define MMAP_CAN0 (CONFIG_SYS_MBAR + 0x00010000) -#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x00011000) +#define MMAP_INTC (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_I2C0 (CFG_SYS_MBAR + 0x00000280) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000400) +#define MMAP_CAN0 (CFG_SYS_MBAR + 0x00010000) +#define MMAP_CAN1 (CFG_SYS_MBAR + 0x00011000) -#define MMAP_PAR (CONFIG_SYS_MBAR2 + 0x0000019C) -#define MMAP_I2C1 (CONFIG_SYS_MBAR2 + 0x00000440) -#define MMAP_UART2 (CONFIG_SYS_MBAR2 + 0x00000C00) +#define MMAP_PAR (CFG_SYS_MBAR2 + 0x0000019C) +#define MMAP_I2C1 (CFG_SYS_MBAR2 + 0x00000440) +#define MMAP_UART2 (CFG_SYS_MBAR2 + 0x00000C00) #include <asm/coldfire/ata.h> #include <asm/coldfire/flexbus.h> diff --git a/arch/m68k/include/asm/immap_5271.h b/arch/m68k/include/asm/immap_5271.h index 27d7861399..a5bf18c4b8 100644 --- a/arch/m68k/include/asm/immap_5271.h +++ b/arch/m68k/include/asm/immap_5271.h @@ -9,42 +9,42 @@ #ifndef __IMMAP_5271__ #define __IMMAP_5271__ -#define MMAP_SCM (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DMA0 (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_DMA1 (CONFIG_SYS_MBAR + 0x00000110) -#define MMAP_DMA2 (CONFIG_SYS_MBAR + 0x00000120) -#define MMAP_DMA3 (CONFIG_SYS_MBAR + 0x00000130) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000240) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00000300) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000340) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000400) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000440) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00000480) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x000004C0) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000C00) -#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x00000D00) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00000F00) -#define MMAP_FEC (CONFIG_SYS_MBAR + 0x00001000) -#define MMAP_FECFIFO (CONFIG_SYS_MBAR + 0x00001400) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00100000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x00110000) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00120000) -#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00130000) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x00140000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00150000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00160000) -#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00170000) -#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x00180000) -#define MMAP_MDHA (CONFIG_SYS_MBAR + 0x00190000) -#define MMAP_RNG (CONFIG_SYS_MBAR + 0x001A0000) -#define MMAP_SKHA (CONFIG_SYS_MBAR + 0x001B0000) -#define MMAP_CAN1 (CONFIG_SYS_MBAR + 0x001C0000) -#define MMAP_ETPU (CONFIG_SYS_MBAR + 0x001D0000) -#define MMAP_CAN2 (CONFIG_SYS_MBAR + 0x001F0000) +#define MMAP_SCM (CFG_SYS_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_SYS_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_SYS_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_SYS_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_SYS_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00000280) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_SYS_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_SYS_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_SYS_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00100000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x00110000) +#define MMAP_PLL (CFG_SYS_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_SYS_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_SYS_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_SYS_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_SYS_MBAR + 0x00190000) +#define MMAP_RNG (CFG_SYS_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_SYS_MBAR + 0x001B0000) +#define MMAP_CAN1 (CFG_SYS_MBAR + 0x001C0000) +#define MMAP_ETPU (CFG_SYS_MBAR + 0x001D0000) +#define MMAP_CAN2 (CFG_SYS_MBAR + 0x001F0000) #include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> diff --git a/arch/m68k/include/asm/immap_5272.h b/arch/m68k/include/asm/immap_5272.h index cd7b67256c..c5c3cc7512 100644 --- a/arch/m68k/include/asm/immap_5272.h +++ b/arch/m68k/include/asm/immap_5272.h @@ -8,24 +8,24 @@ #ifndef __IMMAP_5272__ #define __IMMAP_5272__ -#define MMAP_CFG (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000020) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x000000A0) -#define MMAP_PWM (CONFIG_SYS_MBAR + 0x000000C0) -#define MMAP_DMA0 (CONFIG_SYS_MBAR + 0x000000E0) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000140) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000180) -#define MMAP_TMR0 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_TMR1 (CONFIG_SYS_MBAR + 0x00000220) -#define MMAP_TMR2 (CONFIG_SYS_MBAR + 0x00000240) -#define MMAP_TMR3 (CONFIG_SYS_MBAR + 0x00000260) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_PLIC (CONFIG_SYS_MBAR + 0x00000300) -#define MMAP_FEC (CONFIG_SYS_MBAR + 0x00000840) -#define MMAP_USB (CONFIG_SYS_MBAR + 0x00001000) +#define MMAP_CFG (CFG_SYS_MBAR + 0x00000000) +#define MMAP_INTC (CFG_SYS_MBAR + 0x00000020) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000040) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00000080) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x000000A0) +#define MMAP_PWM (CFG_SYS_MBAR + 0x000000C0) +#define MMAP_DMA0 (CFG_SYS_MBAR + 0x000000E0) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00000100) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000140) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x00000180) +#define MMAP_TMR0 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_TMR1 (CFG_SYS_MBAR + 0x00000220) +#define MMAP_TMR2 (CFG_SYS_MBAR + 0x00000240) +#define MMAP_TMR3 (CFG_SYS_MBAR + 0x00000260) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x00000280) +#define MMAP_PLIC (CFG_SYS_MBAR + 0x00000300) +#define MMAP_FEC (CFG_SYS_MBAR + 0x00000840) +#define MMAP_USB (CFG_SYS_MBAR + 0x00001000) #include <asm/coldfire/pwm.h> diff --git a/arch/m68k/include/asm/immap_5275.h b/arch/m68k/include/asm/immap_5275.h index 8b1a08b4f2..9b8d71d30d 100644 --- a/arch/m68k/include/asm/immap_5275.h +++ b/arch/m68k/include/asm/immap_5275.h @@ -10,44 +10,44 @@ #ifndef __IMMAP_5275__ #define __IMMAP_5275__ -#define MMAP_SCM (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DMA0 (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_DMA1 (CONFIG_SYS_MBAR + 0x00000110) -#define MMAP_DMA2 (CONFIG_SYS_MBAR + 0x00000120) -#define MMAP_DMA3 (CONFIG_SYS_MBAR + 0x00000130) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000240) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00000300) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000340) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000400) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000440) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00000480) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x000004C0) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000C00) -#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x00000D00) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00000F00) -#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00001000) -#define MMAP_FEC0FIFO (CONFIG_SYS_MBAR + 0x00001400) -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00001800) -#define MMAP_FEC1FIFO (CONFIG_SYS_MBAR + 0x00001C00) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00100000) -#define MMAP_RCM (CONFIG_SYS_MBAR + 0x00110000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x00110004) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00120000) -#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00130000) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x00140000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00150000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00160000) -#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00170000) -#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x00180000) -#define MMAP_MDHA (CONFIG_SYS_MBAR + 0x00190000) -#define MMAP_RNG (CONFIG_SYS_MBAR + 0x001A0000) -#define MMAP_SKHA (CONFIG_SYS_MBAR + 0x001B0000) -#define MMAP_USB (CONFIG_SYS_MBAR + 0x001C0000) -#define MMAP_PWM0 (CONFIG_SYS_MBAR + 0x001D0000) +#define MMAP_SCM (CFG_SYS_MBAR + 0x00000000) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_SYS_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_SYS_MBAR + 0x00000110) +#define MMAP_DMA2 (CFG_SYS_MBAR + 0x00000120) +#define MMAP_DMA3 (CFG_SYS_MBAR + 0x00000130) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00000280) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_SYS_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00000F00) +#define MMAP_FEC0 (CFG_SYS_MBAR + 0x00001000) +#define MMAP_FEC0FIFO (CFG_SYS_MBAR + 0x00001400) +#define MMAP_FEC1 (CFG_SYS_MBAR + 0x00001800) +#define MMAP_FEC1FIFO (CFG_SYS_MBAR + 0x00001C00) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00100000) +#define MMAP_RCM (CFG_SYS_MBAR + 0x00110000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x00110004) +#define MMAP_PLL (CFG_SYS_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_SYS_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_SYS_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_SYS_MBAR + 0x00180000) +#define MMAP_MDHA (CFG_SYS_MBAR + 0x00190000) +#define MMAP_RNG (CFG_SYS_MBAR + 0x001A0000) +#define MMAP_SKHA (CFG_SYS_MBAR + 0x001B0000) +#define MMAP_USB (CFG_SYS_MBAR + 0x001C0000) +#define MMAP_PWM0 (CFG_SYS_MBAR + 0x001D0000) #include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> diff --git a/arch/m68k/include/asm/immap_5282.h b/arch/m68k/include/asm/immap_5282.h index d7c68f5749..f810a4dd5c 100644 --- a/arch/m68k/include/asm/immap_5282.h +++ b/arch/m68k/include/asm/immap_5282.h @@ -8,42 +8,42 @@ #ifndef __IMMAP_5282__ #define __IMMAP_5282__ -#define MMAP_SCM (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_SDRAMC (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DMA0 (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_DMA1 (CONFIG_SYS_MBAR + 0x00000140) -#define MMAP_DMA2 (CONFIG_SYS_MBAR + 0x00000180) -#define MMAP_DMA3 (CONFIG_SYS_MBAR + 0x000001C0) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000240) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00000280) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00000300) -#define MMAP_QSPI (CONFIG_SYS_MBAR + 0x00000340) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000400) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000440) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00000480) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x000004C0) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00000C00) -#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x00000D00) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00000F00) -#define MMAP_FEC (CONFIG_SYS_MBAR + 0x00001000) -#define MMAP_FECFIFO (CONFIG_SYS_MBAR + 0x00001400) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00100000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x00110000) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x00120000) -#define MMAP_EPORT (CONFIG_SYS_MBAR + 0x00130000) -#define MMAP_WDOG (CONFIG_SYS_MBAR + 0x00140000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00150000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00160000) -#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00170000) -#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x00180000) -#define MMAP_QADC (CONFIG_SYS_MBAR + 0x00190000) -#define MMAP_GPTMRA (CONFIG_SYS_MBAR + 0x001A0000) -#define MMAP_GPTMRB (CONFIG_SYS_MBAR + 0x001B0000) -#define MMAP_CAN (CONFIG_SYS_MBAR + 0x001C0000) -#define MMAP_CFMC (CONFIG_SYS_MBAR + 0x001D0000) -#define MMAP_CFMMEM (CONFIG_SYS_MBAR + 0x04000000) +#define MMAP_SCM (CFG_SYS_MBAR + 0x00000000) +#define MMAP_SDRAMC (CFG_SYS_MBAR + 0x00000040) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DMA0 (CFG_SYS_MBAR + 0x00000100) +#define MMAP_DMA1 (CFG_SYS_MBAR + 0x00000140) +#define MMAP_DMA2 (CFG_SYS_MBAR + 0x00000180) +#define MMAP_DMA3 (CFG_SYS_MBAR + 0x000001C0) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000240) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00000280) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00000300) +#define MMAP_QSPI (CFG_SYS_MBAR + 0x00000340) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000400) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000440) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00000480) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x000004C0) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00000C00) +#define MMAP_INTC1 (CFG_SYS_MBAR + 0x00000D00) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00000F00) +#define MMAP_FEC (CFG_SYS_MBAR + 0x00001000) +#define MMAP_FECFIFO (CFG_SYS_MBAR + 0x00001400) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00100000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x00110000) +#define MMAP_PLL (CFG_SYS_MBAR + 0x00120000) +#define MMAP_EPORT (CFG_SYS_MBAR + 0x00130000) +#define MMAP_WDOG (CFG_SYS_MBAR + 0x00140000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00150000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00160000) +#define MMAP_PIT2 (CFG_SYS_MBAR + 0x00170000) +#define MMAP_PIT3 (CFG_SYS_MBAR + 0x00180000) +#define MMAP_QADC (CFG_SYS_MBAR + 0x00190000) +#define MMAP_GPTMRA (CFG_SYS_MBAR + 0x001A0000) +#define MMAP_GPTMRB (CFG_SYS_MBAR + 0x001B0000) +#define MMAP_CAN (CFG_SYS_MBAR + 0x001C0000) +#define MMAP_CFMC (CFG_SYS_MBAR + 0x001D0000) +#define MMAP_CFMMEM (CFG_SYS_MBAR + 0x04000000) #include <asm/coldfire/eport.h> #include <asm/coldfire/flexbus.h> diff --git a/arch/m68k/include/asm/immap_5301x.h b/arch/m68k/include/asm/immap_5301x.h index 29e60863bf..e1f7858b10 100644 --- a/arch/m68k/include/asm/immap_5301x.h +++ b/arch/m68k/include/asm/immap_5301x.h @@ -9,46 +9,46 @@ #ifndef __IMMAP_5301X__ #define __IMMAP_5301X__ -#define MMAP_SCM1 (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_XBS (CONFIG_SYS_MBAR + 0x00004000) -#define MMAP_FBCS (CONFIG_SYS_MBAR + 0x00008000) -#define MMAP_MPU (CONFIG_SYS_MBAR + 0x00014000) -#define MMAP_FEC0 (CONFIG_SYS_MBAR + 0x00030000) -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00034000) -#define MMAP_SCM2 (CONFIG_SYS_MBAR + 0x00040000) -#define MMAP_EDMA (CONFIG_SYS_MBAR + 0x00044000) -#define MMAP_INTC0 (CONFIG_SYS_MBAR + 0x00048000) -#define MMAP_INTC1 (CONFIG_SYS_MBAR + 0x0004C000) -#define MMAP_INTCACK (CONFIG_SYS_MBAR + 0x00054000) -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00058000) -#define MMAP_DSPI (CONFIG_SYS_MBAR + 0x0005C000) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x00060000) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00064000) -#define MMAP_UART2 (CONFIG_SYS_MBAR + 0x00068000) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00070000) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00074000) -#define MMAP_DTMR2 (CONFIG_SYS_MBAR + 0x00078000) -#define MMAP_DTMR3 (CONFIG_SYS_MBAR + 0x0007C000) -#define MMAP_PIT0 (CONFIG_SYS_MBAR + 0x00080000) -#define MMAP_PIT1 (CONFIG_SYS_MBAR + 0x00084000) -#define MMAP_PIT2 (CONFIG_SYS_MBAR + 0x00088000) -#define MMAP_PIT3 (CONFIG_SYS_MBAR + 0x0008C000) -#define MMAP_EPORT0 (CONFIG_SYS_MBAR + 0x00090000) -#define MMAP_EPORT1 (CONFIG_SYS_MBAR + 0x00094000) -#define MMAP_VOICOD (CONFIG_SYS_MBAR + 0x0009C000) -#define MMAP_RCM (CONFIG_SYS_MBAR + 0x000A0000) -#define MMAP_CCM (CONFIG_SYS_MBAR + 0x000A0004) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x000A4000) -#define MMAP_RTC (CONFIG_SYS_MBAR + 0x000A8000) -#define MMAP_SIM (CONFIG_SYS_MBAR + 0x000AC000) -#define MMAP_USBOTG (CONFIG_SYS_MBAR + 0x000B0000) -#define MMAP_USBH (CONFIG_SYS_MBAR + 0x000B4000) -#define MMAP_SDRAM (CONFIG_SYS_MBAR + 0x000B8000) -#define MMAP_SSI (CONFIG_SYS_MBAR + 0x000BC000) -#define MMAP_PLL (CONFIG_SYS_MBAR + 0x000C0000) -#define MMAP_RNG (CONFIG_SYS_MBAR + 0x000C4000) -#define MMAP_IIM (CONFIG_SYS_MBAR + 0x000C8000) -#define MMAP_ESDHC (CONFIG_SYS_MBAR + 0x000CC000) +#define MMAP_SCM1 (CFG_SYS_MBAR + 0x00000000) +#define MMAP_XBS (CFG_SYS_MBAR + 0x00004000) +#define MMAP_FBCS (CFG_SYS_MBAR + 0x00008000) +#define MMAP_MPU (CFG_SYS_MBAR + 0x00014000) +#define MMAP_FEC0 (CFG_SYS_MBAR + 0x00030000) +#define MMAP_FEC1 (CFG_SYS_MBAR + 0x00034000) +#define MMAP_SCM2 (CFG_SYS_MBAR + 0x00040000) +#define MMAP_EDMA (CFG_SYS_MBAR + 0x00044000) +#define MMAP_INTC0 (CFG_SYS_MBAR + 0x00048000) +#define MMAP_INTC1 (CFG_SYS_MBAR + 0x0004C000) +#define MMAP_INTCACK (CFG_SYS_MBAR + 0x00054000) +#define MMAP_I2C (CFG_SYS_MBAR + 0x00058000) +#define MMAP_DSPI (CFG_SYS_MBAR + 0x0005C000) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x00060000) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00064000) +#define MMAP_UART2 (CFG_SYS_MBAR + 0x00068000) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00070000) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00074000) +#define MMAP_DTMR2 (CFG_SYS_MBAR + 0x00078000) +#define MMAP_DTMR3 (CFG_SYS_MBAR + 0x0007C000) +#define MMAP_PIT0 (CFG_SYS_MBAR + 0x00080000) +#define MMAP_PIT1 (CFG_SYS_MBAR + 0x00084000) +#define MMAP_PIT2 (CFG_SYS_MBAR + 0x00088000) +#define MMAP_PIT3 (CFG_SYS_MBAR + 0x0008C000) +#define MMAP_EPORT0 (CFG_SYS_MBAR + 0x00090000) +#define MMAP_EPORT1 (CFG_SYS_MBAR + 0x00094000) +#define MMAP_VOICOD (CFG_SYS_MBAR + 0x0009C000) +#define MMAP_RCM (CFG_SYS_MBAR + 0x000A0000) +#define MMAP_CCM (CFG_SYS_MBAR + 0x000A0004) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x000A4000) +#define MMAP_RTC (CFG_SYS_MBAR + 0x000A8000) +#define MMAP_SIM (CFG_SYS_MBAR + 0x000AC000) +#define MMAP_USBOTG (CFG_SYS_MBAR + 0x000B0000) +#define MMAP_USBH (CFG_SYS_MBAR + 0x000B4000) +#define MMAP_SDRAM (CFG_SYS_MBAR + 0x000B8000) +#define MMAP_SSI (CFG_SYS_MBAR + 0x000BC000) +#define MMAP_PLL (CFG_SYS_MBAR + 0x000C0000) +#define MMAP_RNG (CFG_SYS_MBAR + 0x000C4000) +#define MMAP_IIM (CFG_SYS_MBAR + 0x000C8000) +#define MMAP_ESDHC (CFG_SYS_MBAR + 0x000CC000) #include <asm/coldfire/crossbar.h> #include <asm/coldfire/dspi.h> diff --git a/arch/m68k/include/asm/immap_5307.h b/arch/m68k/include/asm/immap_5307.h index 930e0899e8..d6442d95b4 100644 --- a/arch/m68k/include/asm/immap_5307.h +++ b/arch/m68k/include/asm/immap_5307.h @@ -7,15 +7,15 @@ #ifndef __IMMAP_5307__ #define __IMMAP_5307__ -#define MMAP_SIM (CONFIG_SYS_MBAR + 0x00000000) -#define MMAP_INTC (CONFIG_SYS_MBAR + 0x00000040) -#define MMAP_CSM (CONFIG_SYS_MBAR + 0x00000080) -#define MMAP_DRAMC (CONFIG_SYS_MBAR + 0x00000100) -#define MMAP_DTMR0 (CONFIG_SYS_MBAR + 0x00000140) -#define MMAP_DTMR1 (CONFIG_SYS_MBAR + 0x00000180) -#define MMAP_UART0 (CONFIG_SYS_MBAR + 0x000001C0) -#define MMAP_UART1 (CONFIG_SYS_MBAR + 0x00000200) -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000244) +#define MMAP_SIM (CFG_SYS_MBAR + 0x00000000) +#define MMAP_INTC (CFG_SYS_MBAR + 0x00000040) +#define MMAP_CSM (CFG_SYS_MBAR + 0x00000080) +#define MMAP_DRAMC (CFG_SYS_MBAR + 0x00000100) +#define MMAP_DTMR0 (CFG_SYS_MBAR + 0x00000140) +#define MMAP_DTMR1 (CFG_SYS_MBAR + 0x00000180) +#define MMAP_UART0 (CFG_SYS_MBAR + 0x000001C0) +#define MMAP_UART1 (CFG_SYS_MBAR + 0x00000200) +#define MMAP_GPIO (CFG_SYS_MBAR + 0x00000244) typedef struct sim { u8 rsr; diff --git a/arch/m68k/include/asm/m5249.h b/arch/m68k/include/asm/m5249.h index 9303629e4b..afafb4e547 100644 --- a/arch/m68k/include/asm/m5249.h +++ b/arch/m68k/include/asm/m5249.h @@ -14,14 +14,14 @@ /* * useful definitions for reading/writing MBAR offset memory */ -#define mbar_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) -#define mbar_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y -#define mbar2_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) -#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) = y -#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR2 + x)) = y -#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR2 + x)) = y +#define mbar_readLong(x) *((volatile unsigned long *) (CFG_SYS_MBAR + x)) +#define mbar_writeLong(x,y) *((volatile unsigned long *) (CFG_SYS_MBAR + x)) = y +#define mbar_writeShort(x,y) *((volatile unsigned short *) (CFG_SYS_MBAR + x)) = y +#define mbar_writeByte(x,y) *((volatile unsigned char *) (CFG_SYS_MBAR + x)) = y +#define mbar2_readLong(x) *((volatile unsigned long *) (CFG_SYS_MBAR2 + x)) +#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CFG_SYS_MBAR2 + x)) = y +#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CFG_SYS_MBAR2 + x)) = y +#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CFG_SYS_MBAR2 + x)) = y /* * Size of internal RAM diff --git a/arch/m68k/include/asm/m5271.h b/arch/m68k/include/asm/m5271.h index 7ebeddbb68..e63b42c00d 100644 --- a/arch/m68k/include/asm/m5271.h +++ b/arch/m68k/include/asm/m5271.h @@ -11,12 +11,12 @@ #ifndef _MCF5271_H_ #define _MCF5271_H_ -#define mbar_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) -#define mbar_readShort(x) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) -#define mbar_readByte(x) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) -#define mbar_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y +#define mbar_readLong(x) *((volatile unsigned long *) (CFG_SYS_MBAR + x)) +#define mbar_readShort(x) *((volatile unsigned short *) (CFG_SYS_MBAR + x)) +#define mbar_readByte(x) *((volatile unsigned char *) (CFG_SYS_MBAR + x)) +#define mbar_writeLong(x,y) *((volatile unsigned long *) (CFG_SYS_MBAR + x)) = y +#define mbar_writeShort(x,y) *((volatile unsigned short *) (CFG_SYS_MBAR + x)) = y +#define mbar_writeByte(x,y) *((volatile unsigned char *) (CFG_SYS_MBAR + x)) = y #define MCF_FMPLL_SYNCR 0x120000 #define MCF_FMPLL_SYNSR 0x120004 diff --git a/arch/m68k/include/asm/m5282.h b/arch/m68k/include/asm/m5282.h index 0c91cf491e..180f20386f 100644 --- a/arch/m68k/include/asm/m5282.h +++ b/arch/m68k/include/asm/m5282.h @@ -108,112 +108,112 @@ /* General Purpose I/O Module GPIO */ -#define MCFGPIO_PORTA (*(vu_char *) (CONFIG_SYS_MBAR+0x100000)) -#define MCFGPIO_PORTB (*(vu_char *) (CONFIG_SYS_MBAR+0x100001)) -#define MCFGPIO_PORTC (*(vu_char *) (CONFIG_SYS_MBAR+0x100002)) -#define MCFGPIO_PORTD (*(vu_char *) (CONFIG_SYS_MBAR+0x100003)) -#define MCFGPIO_PORTE (*(vu_char *) (CONFIG_SYS_MBAR+0x100004)) -#define MCFGPIO_PORTF (*(vu_char *) (CONFIG_SYS_MBAR+0x100005)) -#define MCFGPIO_PORTG (*(vu_char *) (CONFIG_SYS_MBAR+0x100006)) -#define MCFGPIO_PORTH (*(vu_char *) (CONFIG_SYS_MBAR+0x100007)) -#define MCFGPIO_PORTJ (*(vu_char *) (CONFIG_SYS_MBAR+0x100008)) -#define MCFGPIO_PORTDD (*(vu_char *) (CONFIG_SYS_MBAR+0x100009)) -#define MCFGPIO_PORTEH (*(vu_char *) (CONFIG_SYS_MBAR+0x10000A)) -#define MCFGPIO_PORTEL (*(vu_char *) (CONFIG_SYS_MBAR+0x10000B)) -#define MCFGPIO_PORTAS (*(vu_char *) (CONFIG_SYS_MBAR+0x10000C)) -#define MCFGPIO_PORTQS (*(vu_char *) (CONFIG_SYS_MBAR+0x10000D)) -#define MCFGPIO_PORTSD (*(vu_char *) (CONFIG_SYS_MBAR+0x10000E)) -#define MCFGPIO_PORTTC (*(vu_char *) (CONFIG_SYS_MBAR+0x10000F)) -#define MCFGPIO_PORTTD (*(vu_char *) (CONFIG_SYS_MBAR+0x100010)) -#define MCFGPIO_PORTUA (*(vu_char *) (CONFIG_SYS_MBAR+0x100011)) - -#define MCFGPIO_DDRA (*(vu_char *) (CONFIG_SYS_MBAR+0x100014)) -#define MCFGPIO_DDRB (*(vu_char *) (CONFIG_SYS_MBAR+0x100015)) -#define MCFGPIO_DDRC (*(vu_char *) (CONFIG_SYS_MBAR+0x100016)) -#define MCFGPIO_DDRD (*(vu_char *) (CONFIG_SYS_MBAR+0x100017)) -#define MCFGPIO_DDRE (*(vu_char *) (CONFIG_SYS_MBAR+0x100018)) -#define MCFGPIO_DDRF (*(vu_char *) (CONFIG_SYS_MBAR+0x100019)) -#define MCFGPIO_DDRG (*(vu_char *) (CONFIG_SYS_MBAR+0x10001A)) -#define MCFGPIO_DDRH (*(vu_char *) (CONFIG_SYS_MBAR+0x10001B)) -#define MCFGPIO_DDRJ (*(vu_char *) (CONFIG_SYS_MBAR+0x10001C)) -#define MCFGPIO_DDRDD (*(vu_char *) (CONFIG_SYS_MBAR+0x10001D)) -#define MCFGPIO_DDREH (*(vu_char *) (CONFIG_SYS_MBAR+0x10001E)) -#define MCFGPIO_DDREL (*(vu_char *) (CONFIG_SYS_MBAR+0x10001F)) -#define MCFGPIO_DDRAS (*(vu_char *) (CONFIG_SYS_MBAR+0x100020)) -#define MCFGPIO_DDRQS (*(vu_char *) (CONFIG_SYS_MBAR+0x100021)) -#define MCFGPIO_DDRSD (*(vu_char *) (CONFIG_SYS_MBAR+0x100022)) -#define MCFGPIO_DDRTC (*(vu_char *) (CONFIG_SYS_MBAR+0x100023)) -#define MCFGPIO_DDRTD (*(vu_char *) (CONFIG_SYS_MBAR+0x100024)) -#define MCFGPIO_DDRUA (*(vu_char *) (CONFIG_SYS_MBAR+0x100025)) - -#define MCFGPIO_PORTAP (*(vu_char *) (CONFIG_SYS_MBAR+0x100028)) -#define MCFGPIO_PORTBP (*(vu_char *) (CONFIG_SYS_MBAR+0x100029)) -#define MCFGPIO_PORTCP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002A)) -#define MCFGPIO_PORTDP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002B)) -#define MCFGPIO_PORTEP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002C)) -#define MCFGPIO_PORTFP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002D)) -#define MCFGPIO_PORTGP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002E)) -#define MCFGPIO_PORTHP (*(vu_char *) (CONFIG_SYS_MBAR+0x10002F)) -#define MCFGPIO_PORTJP (*(vu_char *) (CONFIG_SYS_MBAR+0x100030)) -#define MCFGPIO_PORTDDP (*(vu_char *) (CONFIG_SYS_MBAR+0x100031)) -#define MCFGPIO_PORTEHP (*(vu_char *) (CONFIG_SYS_MBAR+0x100032)) -#define MCFGPIO_PORTELP (*(vu_char *) (CONFIG_SYS_MBAR+0x100033)) -#define MCFGPIO_PORTASP (*(vu_char *) (CONFIG_SYS_MBAR+0x100034)) -#define MCFGPIO_PORTQSP (*(vu_char *) (CONFIG_SYS_MBAR+0x100035)) -#define MCFGPIO_PORTSDP (*(vu_char *) (CONFIG_SYS_MBAR+0x100036)) -#define MCFGPIO_PORTTCP (*(vu_char *) (CONFIG_SYS_MBAR+0x100037)) -#define MCFGPIO_PORTTDP (*(vu_char *) (CONFIG_SYS_MBAR+0x100038)) -#define MCFGPIO_PORTUAP (*(vu_char *) (CONFIG_SYS_MBAR+0x100039)) - -#define MCFGPIO_SETA (*(vu_char *) (CONFIG_SYS_MBAR+0x100028)) -#define MCFGPIO_SETB (*(vu_char *) (CONFIG_SYS_MBAR+0x100029)) -#define MCFGPIO_SETC (*(vu_char *) (CONFIG_SYS_MBAR+0x10002A)) -#define MCFGPIO_SETD (*(vu_char *) (CONFIG_SYS_MBAR+0x10002B)) -#define MCFGPIO_SETE (*(vu_char *) (CONFIG_SYS_MBAR+0x10002C)) -#define MCFGPIO_SETF (*(vu_char *) (CONFIG_SYS_MBAR+0x10002D)) -#define MCFGPIO_SETG (*(vu_char *) (CONFIG_SYS_MBAR+0x10002E)) -#define MCFGPIO_SETH (*(vu_char *) (CONFIG_SYS_MBAR+0x10002F)) -#define MCFGPIO_SETJ (*(vu_char *) (CONFIG_SYS_MBAR+0x100030)) -#define MCFGPIO_SETDD (*(vu_char *) (CONFIG_SYS_MBAR+0x100031)) -#define MCFGPIO_SETEH (*(vu_char *) (CONFIG_SYS_MBAR+0x100032)) -#define MCFGPIO_SETEL (*(vu_char *) (CONFIG_SYS_MBAR+0x100033)) -#define MCFGPIO_SETAS (*(vu_char *) (CONFIG_SYS_MBAR+0x100034)) -#define MCFGPIO_SETQS (*(vu_char *) (CONFIG_SYS_MBAR+0x100035)) -#define MCFGPIO_SETSD (*(vu_char *) (CONFIG_SYS_MBAR+0x100036)) -#define MCFGPIO_SETTC (*(vu_char *) (CONFIG_SYS_MBAR+0x100037)) -#define MCFGPIO_SETTD (*(vu_char *) (CONFIG_SYS_MBAR+0x100038)) -#define MCFGPIO_SETUA (*(vu_char *) (CONFIG_SYS_MBAR+0x100039)) - -#define MCFGPIO_CLRA (*(vu_char *) (CONFIG_SYS_MBAR+0x10003C)) -#define MCFGPIO_CLRB (*(vu_char *) (CONFIG_SYS_MBAR+0x10003D)) -#define MCFGPIO_CLRC (*(vu_char *) (CONFIG_SYS_MBAR+0x10003E)) -#define MCFGPIO_CLRD (*(vu_char *) (CONFIG_SYS_MBAR+0x10003F)) -#define MCFGPIO_CLRE (*(vu_char *) (CONFIG_SYS_MBAR+0x100040)) -#define MCFGPIO_CLRF (*(vu_char *) (CONFIG_SYS_MBAR+0x100041)) -#define MCFGPIO_CLRG (*(vu_char *) (CONFIG_SYS_MBAR+0x100042)) -#define MCFGPIO_CLRH (*(vu_char *) (CONFIG_SYS_MBAR+0x100043)) -#define MCFGPIO_CLRJ (*(vu_char *) (CONFIG_SYS_MBAR+0x100044)) -#define MCFGPIO_CLRDD (*(vu_char *) (CONFIG_SYS_MBAR+0x100045)) -#define MCFGPIO_CLREH (*(vu_char *) (CONFIG_SYS_MBAR+0x100046)) -#define MCFGPIO_CLREL (*(vu_char *) (CONFIG_SYS_MBAR+0x100047)) -#define MCFGPIO_CLRAS (*(vu_char *) (CONFIG_SYS_MBAR+0x100048)) -#define MCFGPIO_CLRQS (*(vu_char *) (CONFIG_SYS_MBAR+0x100049)) -#define MCFGPIO_CLRSD (*(vu_char *) (CONFIG_SYS_MBAR+0x10004A)) -#define MCFGPIO_CLRTC (*(vu_char *) (CONFIG_SYS_MBAR+0x10004B)) -#define MCFGPIO_CLRTD (*(vu_char *) (CONFIG_SYS_MBAR+0x10004C)) -#define MCFGPIO_CLRUA (*(vu_char *) (CONFIG_SYS_MBAR+0x10004D)) - -#define MCFGPIO_PBCDPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100050)) -#define MCFGPIO_PFPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100051)) -#define MCFGPIO_PEPAR (*(vu_short *)(CONFIG_SYS_MBAR+0x100052)) -#define MCFGPIO_PJPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100054)) -#define MCFGPIO_PSDPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100055)) -#define MCFGPIO_PASPAR (*(vu_short *)(CONFIG_SYS_MBAR+0x100056)) -#define MCFGPIO_PEHLPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100058)) -#define MCFGPIO_PQSPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x100059)) -#define MCFGPIO_PTCPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x10005A)) -#define MCFGPIO_PTDPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x10005B)) -#define MCFGPIO_PUAPAR (*(vu_char *) (CONFIG_SYS_MBAR+0x10005C)) +#define MCFGPIO_PORTA (*(vu_char *) (CFG_SYS_MBAR+0x100000)) +#define MCFGPIO_PORTB (*(vu_char *) (CFG_SYS_MBAR+0x100001)) +#define MCFGPIO_PORTC (*(vu_char *) (CFG_SYS_MBAR+0x100002)) +#define MCFGPIO_PORTD (*(vu_char *) (CFG_SYS_MBAR+0x100003)) +#define MCFGPIO_PORTE (*(vu_char *) (CFG_SYS_MBAR+0x100004)) +#define MCFGPIO_PORTF (*(vu_char *) (CFG_SYS_MBAR+0x100005)) +#define MCFGPIO_PORTG (*(vu_char *) (CFG_SYS_MBAR+0x100006)) +#define MCFGPIO_PORTH (*(vu_char *) (CFG_SYS_MBAR+0x100007)) +#define MCFGPIO_PORTJ (*(vu_char *) (CFG_SYS_MBAR+0x100008)) +#define MCFGPIO_PORTDD (*(vu_char *) (CFG_SYS_MBAR+0x100009)) +#define MCFGPIO_PORTEH (*(vu_char *) (CFG_SYS_MBAR+0x10000A)) +#define MCFGPIO_PORTEL (*(vu_char *) (CFG_SYS_MBAR+0x10000B)) +#define MCFGPIO_PORTAS (*(vu_char *) (CFG_SYS_MBAR+0x10000C)) +#define MCFGPIO_PORTQS (*(vu_char *) (CFG_SYS_MBAR+0x10000D)) +#define MCFGPIO_PORTSD (*(vu_char *) (CFG_SYS_MBAR+0x10000E)) +#define MCFGPIO_PORTTC (*(vu_char *) (CFG_SYS_MBAR+0x10000F)) +#define MCFGPIO_PORTTD (*(vu_char *) (CFG_SYS_MBAR+0x100010)) +#define MCFGPIO_PORTUA (*(vu_char *) (CFG_SYS_MBAR+0x100011)) + +#define MCFGPIO_DDRA (*(vu_char *) (CFG_SYS_MBAR+0x100014)) +#define MCFGPIO_DDRB (*(vu_char *) (CFG_SYS_MBAR+0x100015)) +#define MCFGPIO_DDRC (*(vu_char *) (CFG_SYS_MBAR+0x100016)) +#define MCFGPIO_DDRD (*(vu_char *) (CFG_SYS_MBAR+0x100017)) +#define MCFGPIO_DDRE (*(vu_char *) (CFG_SYS_MBAR+0x100018)) +#define MCFGPIO_DDRF (*(vu_char *) (CFG_SYS_MBAR+0x100019)) +#define MCFGPIO_DDRG (*(vu_char *) (CFG_SYS_MBAR+0x10001A)) +#define MCFGPIO_DDRH (*(vu_char *) (CFG_SYS_MBAR+0x10001B)) +#define MCFGPIO_DDRJ (*(vu_char *) (CFG_SYS_MBAR+0x10001C)) +#define MCFGPIO_DDRDD (*(vu_char *) (CFG_SYS_MBAR+0x10001D)) +#define MCFGPIO_DDREH (*(vu_char *) (CFG_SYS_MBAR+0x10001E)) +#define MCFGPIO_DDREL (*(vu_char *) (CFG_SYS_MBAR+0x10001F)) +#define MCFGPIO_DDRAS (*(vu_char *) (CFG_SYS_MBAR+0x100020)) +#define MCFGPIO_DDRQS (*(vu_char *) (CFG_SYS_MBAR+0x100021)) +#define MCFGPIO_DDRSD (*(vu_char *) (CFG_SYS_MBAR+0x100022)) +#define MCFGPIO_DDRTC (*(vu_char *) (CFG_SYS_MBAR+0x100023)) +#define MCFGPIO_DDRTD (*(vu_char *) (CFG_SYS_MBAR+0x100024)) +#define MCFGPIO_DDRUA (*(vu_char *) (CFG_SYS_MBAR+0x100025)) + +#define MCFGPIO_PORTAP (*(vu_char *) (CFG_SYS_MBAR+0x100028)) +#define MCFGPIO_PORTBP (*(vu_char *) (CFG_SYS_MBAR+0x100029)) +#define MCFGPIO_PORTCP (*(vu_char *) (CFG_SYS_MBAR+0x10002A)) +#define MCFGPIO_PORTDP (*(vu_char *) (CFG_SYS_MBAR+0x10002B)) +#define MCFGPIO_PORTEP (*(vu_char *) (CFG_SYS_MBAR+0x10002C)) +#define MCFGPIO_PORTFP (*(vu_char *) (CFG_SYS_MBAR+0x10002D)) +#define MCFGPIO_PORTGP (*(vu_char *) (CFG_SYS_MBAR+0x10002E)) +#define MCFGPIO_PORTHP (*(vu_char *) (CFG_SYS_MBAR+0x10002F)) +#define MCFGPIO_PORTJP (*(vu_char *) (CFG_SYS_MBAR+0x100030)) +#define MCFGPIO_PORTDDP (*(vu_char *) (CFG_SYS_MBAR+0x100031)) +#define MCFGPIO_PORTEHP (*(vu_char *) (CFG_SYS_MBAR+0x100032)) +#define MCFGPIO_PORTELP (*(vu_char *) (CFG_SYS_MBAR+0x100033)) +#define MCFGPIO_PORTASP (*(vu_char *) (CFG_SYS_MBAR+0x100034)) +#define MCFGPIO_PORTQSP (*(vu_char *) (CFG_SYS_MBAR+0x100035)) +#define MCFGPIO_PORTSDP (*(vu_char *) (CFG_SYS_MBAR+0x100036)) +#define MCFGPIO_PORTTCP (*(vu_char *) (CFG_SYS_MBAR+0x100037)) +#define MCFGPIO_PORTTDP (*(vu_char *) (CFG_SYS_MBAR+0x100038)) +#define MCFGPIO_PORTUAP (*(vu_char *) (CFG_SYS_MBAR+0x100039)) + +#define MCFGPIO_SETA (*(vu_char *) (CFG_SYS_MBAR+0x100028)) +#define MCFGPIO_SETB (*(vu_char *) (CFG_SYS_MBAR+0x100029)) +#define MCFGPIO_SETC (*(vu_char *) (CFG_SYS_MBAR+0x10002A)) +#define MCFGPIO_SETD (*(vu_char *) (CFG_SYS_MBAR+0x10002B)) +#define MCFGPIO_SETE (*(vu_char *) (CFG_SYS_MBAR+0x10002C)) +#define MCFGPIO_SETF (*(vu_char *) (CFG_SYS_MBAR+0x10002D)) +#define MCFGPIO_SETG (*(vu_char *) (CFG_SYS_MBAR+0x10002E)) +#define MCFGPIO_SETH (*(vu_char *) (CFG_SYS_MBAR+0x10002F)) +#define MCFGPIO_SETJ (*(vu_char *) (CFG_SYS_MBAR+0x100030)) +#define MCFGPIO_SETDD (*(vu_char *) (CFG_SYS_MBAR+0x100031)) +#define MCFGPIO_SETEH (*(vu_char *) (CFG_SYS_MBAR+0x100032)) +#define MCFGPIO_SETEL (*(vu_char *) (CFG_SYS_MBAR+0x100033)) +#define MCFGPIO_SETAS (*(vu_char *) (CFG_SYS_MBAR+0x100034)) +#define MCFGPIO_SETQS (*(vu_char *) (CFG_SYS_MBAR+0x100035)) +#define MCFGPIO_SETSD (*(vu_char *) (CFG_SYS_MBAR+0x100036)) +#define MCFGPIO_SETTC (*(vu_char *) (CFG_SYS_MBAR+0x100037)) +#define MCFGPIO_SETTD (*(vu_char *) (CFG_SYS_MBAR+0x100038)) +#define MCFGPIO_SETUA (*(vu_char *) (CFG_SYS_MBAR+0x100039)) + +#define MCFGPIO_CLRA (*(vu_char *) (CFG_SYS_MBAR+0x10003C)) +#define MCFGPIO_CLRB (*(vu_char *) (CFG_SYS_MBAR+0x10003D)) +#define MCFGPIO_CLRC (*(vu_char *) (CFG_SYS_MBAR+0x10003E)) +#define MCFGPIO_CLRD (*(vu_char *) (CFG_SYS_MBAR+0x10003F)) +#define MCFGPIO_CLRE (*(vu_char *) (CFG_SYS_MBAR+0x100040)) +#define MCFGPIO_CLRF (*(vu_char *) (CFG_SYS_MBAR+0x100041)) +#define MCFGPIO_CLRG (*(vu_char *) (CFG_SYS_MBAR+0x100042)) +#define MCFGPIO_CLRH (*(vu_char *) (CFG_SYS_MBAR+0x100043)) +#define MCFGPIO_CLRJ (*(vu_char *) (CFG_SYS_MBAR+0x100044)) +#define MCFGPIO_CLRDD (*(vu_char *) (CFG_SYS_MBAR+0x100045)) +#define MCFGPIO_CLREH (*(vu_char *) (CFG_SYS_MBAR+0x100046)) +#define MCFGPIO_CLREL (*(vu_char *) (CFG_SYS_MBAR+0x100047)) +#define MCFGPIO_CLRAS (*(vu_char *) (CFG_SYS_MBAR+0x100048)) +#define MCFGPIO_CLRQS (*(vu_char *) (CFG_SYS_MBAR+0x100049)) +#define MCFGPIO_CLRSD (*(vu_char *) (CFG_SYS_MBAR+0x10004A)) +#define MCFGPIO_CLRTC (*(vu_char *) (CFG_SYS_MBAR+0x10004B)) +#define MCFGPIO_CLRTD (*(vu_char *) (CFG_SYS_MBAR+0x10004C)) +#define MCFGPIO_CLRUA (*(vu_char *) (CFG_SYS_MBAR+0x10004D)) + +#define MCFGPIO_PBCDPAR (*(vu_char *) (CFG_SYS_MBAR+0x100050)) +#define MCFGPIO_PFPAR (*(vu_char *) (CFG_SYS_MBAR+0x100051)) +#define MCFGPIO_PEPAR (*(vu_short *)(CFG_SYS_MBAR+0x100052)) +#define MCFGPIO_PJPAR (*(vu_char *) (CFG_SYS_MBAR+0x100054)) +#define MCFGPIO_PSDPAR (*(vu_char *) (CFG_SYS_MBAR+0x100055)) +#define MCFGPIO_PASPAR (*(vu_short *)(CFG_SYS_MBAR+0x100056)) +#define MCFGPIO_PEHLPAR (*(vu_char *) (CFG_SYS_MBAR+0x100058)) +#define MCFGPIO_PQSPAR (*(vu_char *) (CFG_SYS_MBAR+0x100059)) +#define MCFGPIO_PTCPAR (*(vu_char *) (CFG_SYS_MBAR+0x10005A)) +#define MCFGPIO_PTDPAR (*(vu_char *) (CFG_SYS_MBAR+0x10005B)) +#define MCFGPIO_PUAPAR (*(vu_char *) (CFG_SYS_MBAR+0x10005C)) /* Bit level definitions and macros */ #define MCFGPIO_PORT7 (0x80) @@ -310,25 +310,25 @@ /* System Conrol Module SCM */ -#define MCFSCM_RAMBAR (*(vu_long *) (CONFIG_SYS_MBAR+0x00000008)) -#define MCFSCM_CRSR (*(vu_char *) (CONFIG_SYS_MBAR+0x00000010)) -#define MCFSCM_CWCR (*(vu_char *) (CONFIG_SYS_MBAR+0x00000011)) -#define MCFSCM_LPICR (*(vu_char *) (CONFIG_SYS_MBAR+0x00000012)) -#define MCFSCM_CWSR (*(vu_char *) (CONFIG_SYS_MBAR+0x00000013)) - -#define MCFSCM_MPARK (*(vu_long *) (CONFIG_SYS_MBAR+0x0000001C)) -#define MCFSCM_MPR (*(vu_char *) (CONFIG_SYS_MBAR+0x00000020)) -#define MCFSCM_PACR0 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000024)) -#define MCFSCM_PACR1 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000025)) -#define MCFSCM_PACR2 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000026)) -#define MCFSCM_PACR3 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000027)) -#define MCFSCM_PACR4 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000028)) -#define MCFSCM_PACR5 (*(vu_char *) (CONFIG_SYS_MBAR+0x0000002A)) -#define MCFSCM_PACR6 (*(vu_char *) (CONFIG_SYS_MBAR+0x0000002B)) -#define MCFSCM_PACR7 (*(vu_char *) (CONFIG_SYS_MBAR+0x0000002C)) -#define MCFSCM_PACR8 (*(vu_char *) (CONFIG_SYS_MBAR+0x0000002E)) -#define MCFSCM_GPACR0 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000030)) -#define MCFSCM_GPACR1 (*(vu_char *) (CONFIG_SYS_MBAR+0x00000031)) +#define MCFSCM_RAMBAR (*(vu_long *) (CFG_SYS_MBAR+0x00000008)) +#define MCFSCM_CRSR (*(vu_char *) (CFG_SYS_MBAR+0x00000010)) +#define MCFSCM_CWCR (*(vu_char *) (CFG_SYS_MBAR+0x00000011)) +#define MCFSCM_LPICR (*(vu_char *) (CFG_SYS_MBAR+0x00000012)) +#define MCFSCM_CWSR (*(vu_char *) (CFG_SYS_MBAR+0x00000013)) + +#define MCFSCM_MPARK (*(vu_long *) (CFG_SYS_MBAR+0x0000001C)) +#define MCFSCM_MPR (*(vu_char *) (CFG_SYS_MBAR+0x00000020)) +#define MCFSCM_PACR0 (*(vu_char *) (CFG_SYS_MBAR+0x00000024)) +#define MCFSCM_PACR1 (*(vu_char *) (CFG_SYS_MBAR+0x00000025)) +#define MCFSCM_PACR2 (*(vu_char *) (CFG_SYS_MBAR+0x00000026)) +#define MCFSCM_PACR3 (*(vu_char *) (CFG_SYS_MBAR+0x00000027)) +#define MCFSCM_PACR4 (*(vu_char *) (CFG_SYS_MBAR+0x00000028)) +#define MCFSCM_PACR5 (*(vu_char *) (CFG_SYS_MBAR+0x0000002A)) +#define MCFSCM_PACR6 (*(vu_char *) (CFG_SYS_MBAR+0x0000002B)) +#define MCFSCM_PACR7 (*(vu_char *) (CFG_SYS_MBAR+0x0000002C)) +#define MCFSCM_PACR8 (*(vu_char *) (CFG_SYS_MBAR+0x0000002E)) +#define MCFSCM_GPACR0 (*(vu_char *) (CFG_SYS_MBAR+0x00000030)) +#define MCFSCM_GPACR1 (*(vu_char *) (CFG_SYS_MBAR+0x00000031)) #define MCFSCM_CRSR_EXT (0x80) #define MCFSCM_CRSR_CWDR (0x20) @@ -337,8 +337,8 @@ /* Reset Controller Module RCM */ -#define MCFRESET_RCR (*(vu_char *) (CONFIG_SYS_MBAR+0x00110000)) -#define MCFRESET_RSR (*(vu_char *) (CONFIG_SYS_MBAR+0x00110001)) +#define MCFRESET_RCR (*(vu_char *) (CFG_SYS_MBAR+0x00110000)) +#define MCFRESET_RSR (*(vu_char *) (CFG_SYS_MBAR+0x00110001)) #define MCFRESET_RCR_SOFTRST (0x80) #define MCFRESET_RCR_FRCRSTOUT (0x40) @@ -360,9 +360,9 @@ /* Chip Configuration Module CCM */ -#define MCFCCM_CCR (*(vu_short *)(CONFIG_SYS_MBAR+0x00110004)) -#define MCFCCM_RCON (*(vu_short *)(CONFIG_SYS_MBAR+0x00110008)) -#define MCFCCM_CIR (*(vu_short *)(CONFIG_SYS_MBAR+0x0011000A)) +#define MCFCCM_CCR (*(vu_short *)(CFG_SYS_MBAR+0x00110004)) +#define MCFCCM_RCON (*(vu_short *)(CFG_SYS_MBAR+0x00110008)) +#define MCFCCM_CIR (*(vu_short *)(CFG_SYS_MBAR+0x0011000A)) /* Bit level definitions and macros */ #define MCFCCM_CCR_LOAD (0x8000) @@ -377,18 +377,18 @@ /* Clock Module */ -#define MCFCLOCK_SYNCR (*(vu_short *)(CONFIG_SYS_MBAR+0x120000)) -#define MCFCLOCK_SYNSR (*(vu_char *) (CONFIG_SYS_MBAR+0x120002)) +#define MCFCLOCK_SYNCR (*(vu_short *)(CFG_SYS_MBAR+0x120000)) +#define MCFCLOCK_SYNSR (*(vu_char *) (CFG_SYS_MBAR+0x120002)) #define MCFCLOCK_SYNCR_MFD(x) (((x)&0x0007)<<12) #define MCFCLOCK_SYNCR_RFD(x) (((x)&0x0007)<<8) #define MCFCLOCK_SYNSR_LOCK 0x08 -#define MCFSDRAMC_DCR (*(vu_short *)(CONFIG_SYS_MBAR+0x00000040)) -#define MCFSDRAMC_DACR0 (*(vu_long *) (CONFIG_SYS_MBAR+0x00000048)) -#define MCFSDRAMC_DMR0 (*(vu_long *) (CONFIG_SYS_MBAR+0x0000004c)) -#define MCFSDRAMC_DACR1 (*(vu_long *) (CONFIG_SYS_MBAR+0x00000050)) -#define MCFSDRAMC_DMR1 (*(vu_long *) (CONFIG_SYS_MBAR+0x00000054)) +#define MCFSDRAMC_DCR (*(vu_short *)(CFG_SYS_MBAR+0x00000040)) +#define MCFSDRAMC_DACR0 (*(vu_long *) (CFG_SYS_MBAR+0x00000048)) +#define MCFSDRAMC_DMR0 (*(vu_long *) (CFG_SYS_MBAR+0x0000004c)) +#define MCFSDRAMC_DACR1 (*(vu_long *) (CFG_SYS_MBAR+0x00000050)) +#define MCFSDRAMC_DMR1 (*(vu_long *) (CFG_SYS_MBAR+0x00000054)) #define MCFSDRAMC_DCR_NAM (0x2000) #define MCFSDRAMC_DCR_COC (0x1000) @@ -418,60 +418,60 @@ #define MCFSDRAMC_DMR_UD (0x00000002) #define MCFSDRAMC_DMR_V (0x00000001) -#define MCFWTM_WCR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140000)) -#define MCFWTM_WMR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140002)) -#define MCFWTM_WCNTR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140004)) -#define MCFWTM_WSR (*(vu_short *)(CONFIG_SYS_MBAR+0x00140006)) +#define MCFWTM_WCR (*(vu_short *)(CFG_SYS_MBAR+0x00140000)) +#define MCFWTM_WMR (*(vu_short *)(CFG_SYS_MBAR+0x00140002)) +#define MCFWTM_WCNTR (*(vu_short *)(CFG_SYS_MBAR+0x00140004)) +#define MCFWTM_WSR (*(vu_short *)(CFG_SYS_MBAR+0x00140006)) /********************************************************************* * General Purpose Timer (GPT) Module *********************************************************************/ -#define MCFGPTA_GPTIOS (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0000)) -#define MCFGPTA_GPTCFORC (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0001)) -#define MCFGPTA_GPTOC3M (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0002)) -#define MCFGPTA_GPTOC3D (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0003)) -#define MCFGPTA_GPTCNT (*(vu_short *)(CONFIG_SYS_MBAR+0x1A0004)) -#define MCFGPTA_GPTSCR1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0006)) -#define MCFGPTA_GPTTOV (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0008)) -#define MCFGPTA_GPTCTL1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0009)) -#define MCFGPTA_GPTCTL2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A000B)) -#define MCFGPTA_GPTIE (*(vu_char *)(CONFIG_SYS_MBAR+0x1A000C)) -#define MCFGPTA_GPTSCR2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A000D)) -#define MCFGPTA_GPTFLG1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A000E)) -#define MCFGPTA_GPTFLG2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1A000F)) -#define MCFGPTA_GPTC0 (*(vu_short *)(CONFIG_SYS_MBAR+0x1A0010)) -#define MCFGPTA_GPTC1 (*(vu_short *)(CONFIG_SYS_MBAR+0x1A0012)) -#define MCFGPTA_GPTC2 (*(vu_short *)(CONFIG_SYS_MBAR+0x1A0014)) -#define MCFGPTA_GPTC3 (*(vu_short *)(CONFIG_SYS_MBAR+0x1A0016)) -#define MCFGPTA_GPTPACTL (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0018)) -#define MCFGPTA_GPTPAFLG (*(vu_char *)(CONFIG_SYS_MBAR+0x1A0019)) -#define MCFGPTA_GPTPACNT (*(vu_short *)(CONFIG_SYS_MBAR+0x1A001A)) -#define MCFGPTA_GPTPORT (*(vu_char *)(CONFIG_SYS_MBAR+0x1A001D)) -#define MCFGPTA_GPTDDR (*(vu_char *)(CONFIG_SYS_MBAR+0x1A001E)) - -#define MCFGPTB_GPTIOS (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0000)) -#define MCFGPTB_GPTCFORC (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0001)) -#define MCFGPTB_GPTOC3M (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0002)) -#define MCFGPTB_GPTOC3D (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0003)) -#define MCFGPTB_GPTCNT (*(vu_short *)(CONFIG_SYS_MBAR+0x1B0004)) -#define MCFGPTB_GPTSCR1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0006)) -#define MCFGPTB_GPTTOV (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0008)) -#define MCFGPTB_GPTCTL1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0009)) -#define MCFGPTB_GPTCTL2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B000B)) -#define MCFGPTB_GPTIE (*(vu_char *)(CONFIG_SYS_MBAR+0x1B000C)) -#define MCFGPTB_GPTSCR2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B000D)) -#define MCFGPTB_GPTFLG1 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B000E)) -#define MCFGPTB_GPTFLG2 (*(vu_char *)(CONFIG_SYS_MBAR+0x1B000F)) -#define MCFGPTB_GPTC0 (*(vu_short *)(CONFIG_SYS_MBAR+0x1B0010)) -#define MCFGPTB_GPTC1 (*(vu_short *)(CONFIG_SYS_MBAR+0x1B0012)) -#define MCFGPTB_GPTC2 (*(vu_short *)(CONFIG_SYS_MBAR+0x1B0014)) -#define MCFGPTB_GPTC3 (*(vu_short *)(CONFIG_SYS_MBAR+0x1B0016)) -#define MCFGPTB_GPTPACTL (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0018)) -#define MCFGPTB_GPTPAFLG (*(vu_char *)(CONFIG_SYS_MBAR+0x1B0019)) -#define MCFGPTB_GPTPACNT (*(vu_short *)(CONFIG_SYS_MBAR+0x1B001A)) -#define MCFGPTB_GPTPORT (*(vu_char *)(CONFIG_SYS_MBAR+0x1B001D)) -#define MCFGPTB_GPTDDR (*(vu_char *)(CONFIG_SYS_MBAR+0x1B001E)) +#define MCFGPTA_GPTIOS (*(vu_char *)(CFG_SYS_MBAR+0x1A0000)) +#define MCFGPTA_GPTCFORC (*(vu_char *)(CFG_SYS_MBAR+0x1A0001)) +#define MCFGPTA_GPTOC3M (*(vu_char *)(CFG_SYS_MBAR+0x1A0002)) +#define MCFGPTA_GPTOC3D (*(vu_char *)(CFG_SYS_MBAR+0x1A0003)) +#define MCFGPTA_GPTCNT (*(vu_short *)(CFG_SYS_MBAR+0x1A0004)) +#define MCFGPTA_GPTSCR1 (*(vu_char *)(CFG_SYS_MBAR+0x1A0006)) +#define MCFGPTA_GPTTOV (*(vu_char *)(CFG_SYS_MBAR+0x1A0008)) +#define MCFGPTA_GPTCTL1 (*(vu_char *)(CFG_SYS_MBAR+0x1A0009)) +#define MCFGPTA_GPTCTL2 (*(vu_char *)(CFG_SYS_MBAR+0x1A000B)) +#define MCFGPTA_GPTIE (*(vu_char *)(CFG_SYS_MBAR+0x1A000C)) +#define MCFGPTA_GPTSCR2 (*(vu_char *)(CFG_SYS_MBAR+0x1A000D)) +#define MCFGPTA_GPTFLG1 (*(vu_char *)(CFG_SYS_MBAR+0x1A000E)) +#define MCFGPTA_GPTFLG2 (*(vu_char *)(CFG_SYS_MBAR+0x1A000F)) +#define MCFGPTA_GPTC0 (*(vu_short *)(CFG_SYS_MBAR+0x1A0010)) +#define MCFGPTA_GPTC1 (*(vu_short *)(CFG_SYS_MBAR+0x1A0012)) +#define MCFGPTA_GPTC2 (*(vu_short *)(CFG_SYS_MBAR+0x1A0014)) +#define MCFGPTA_GPTC3 (*(vu_short *)(CFG_SYS_MBAR+0x1A0016)) +#define MCFGPTA_GPTPACTL (*(vu_char *)(CFG_SYS_MBAR+0x1A0018)) +#define MCFGPTA_GPTPAFLG (*(vu_char *)(CFG_SYS_MBAR+0x1A0019)) +#define MCFGPTA_GPTPACNT (*(vu_short *)(CFG_SYS_MBAR+0x1A001A)) +#define MCFGPTA_GPTPORT (*(vu_char *)(CFG_SYS_MBAR+0x1A001D)) +#define MCFGPTA_GPTDDR (*(vu_char *)(CFG_SYS_MBAR+0x1A001E)) + +#define MCFGPTB_GPTIOS (*(vu_char *)(CFG_SYS_MBAR+0x1B0000)) +#define MCFGPTB_GPTCFORC (*(vu_char *)(CFG_SYS_MBAR+0x1B0001)) +#define MCFGPTB_GPTOC3M (*(vu_char *)(CFG_SYS_MBAR+0x1B0002)) +#define MCFGPTB_GPTOC3D (*(vu_char *)(CFG_SYS_MBAR+0x1B0003)) +#define MCFGPTB_GPTCNT (*(vu_short *)(CFG_SYS_MBAR+0x1B0004)) +#define MCFGPTB_GPTSCR1 (*(vu_char *)(CFG_SYS_MBAR+0x1B0006)) +#define MCFGPTB_GPTTOV (*(vu_char *)(CFG_SYS_MBAR+0x1B0008)) +#define MCFGPTB_GPTCTL1 (*(vu_char *)(CFG_SYS_MBAR+0x1B0009)) +#define MCFGPTB_GPTCTL2 (*(vu_char *)(CFG_SYS_MBAR+0x1B000B)) +#define MCFGPTB_GPTIE (*(vu_char *)(CFG_SYS_MBAR+0x1B000C)) +#define MCFGPTB_GPTSCR2 (*(vu_char *)(CFG_SYS_MBAR+0x1B000D)) +#define MCFGPTB_GPTFLG1 (*(vu_char *)(CFG_SYS_MBAR+0x1B000E)) +#define MCFGPTB_GPTFLG2 (*(vu_char *)(CFG_SYS_MBAR+0x1B000F)) +#define MCFGPTB_GPTC0 (*(vu_short *)(CFG_SYS_MBAR+0x1B0010)) +#define MCFGPTB_GPTC1 (*(vu_short *)(CFG_SYS_MBAR+0x1B0012)) +#define MCFGPTB_GPTC2 (*(vu_short *)(CFG_SYS_MBAR+0x1B0014)) +#define MCFGPTB_GPTC3 (*(vu_short *)(CFG_SYS_MBAR+0x1B0016)) +#define MCFGPTB_GPTPACTL (*(vu_char *)(CFG_SYS_MBAR+0x1B0018)) +#define MCFGPTB_GPTPAFLG (*(vu_char *)(CFG_SYS_MBAR+0x1B0019)) +#define MCFGPTB_GPTPACNT (*(vu_short *)(CFG_SYS_MBAR+0x1B001A)) +#define MCFGPTB_GPTPORT (*(vu_char *)(CFG_SYS_MBAR+0x1B001D)) +#define MCFGPTB_GPTDDR (*(vu_char *)(CFG_SYS_MBAR+0x1B001E)) /* Bit level definitions and macros */ #define MCFGPT_GPTIOS_IOS3 (0x08) @@ -556,7 +556,7 @@ /* Coldfire Flash Module CFM */ -#define MCFCFM_MCR (*(vu_short *)(CONFIG_SYS_MBAR+0x1D0000)) +#define MCFCFM_MCR (*(vu_short *)(CFG_SYS_MBAR+0x1D0000)) #define MCFCFM_MCR_LOCK (0x0400) #define MCFCFM_MCR_PVIE (0x0200) #define MCFCFM_MCR_AEIE (0x0100) @@ -564,23 +564,23 @@ #define MCFCFM_MCR_CCIE (0x0040) #define MCFCFM_MCR_KEYACC (0x0020) -#define MCFCFM_CLKD (*(vu_char *)(CONFIG_SYS_MBAR+0x1D0002)) +#define MCFCFM_CLKD (*(vu_char *)(CFG_SYS_MBAR+0x1D0002)) -#define MCFCFM_SEC (*(vu_long*) (CONFIG_SYS_MBAR+0x1D0008)) +#define MCFCFM_SEC (*(vu_long*) (CFG_SYS_MBAR+0x1D0008)) #define MCFCFM_SEC_KEYEN (0x80000000) #define MCFCFM_SEC_SECSTAT (0x40000000) -#define MCFCFM_PROT (*(vu_long*) (CONFIG_SYS_MBAR+0x1D0010)) -#define MCFCFM_SACC (*(vu_long*) (CONFIG_SYS_MBAR+0x1D0014)) -#define MCFCFM_DACC (*(vu_long*) (CONFIG_SYS_MBAR+0x1D0018)) -#define MCFCFM_USTAT (*(vu_char*) (CONFIG_SYS_MBAR+0x1D0020)) +#define MCFCFM_PROT (*(vu_long*) (CFG_SYS_MBAR+0x1D0010)) +#define MCFCFM_SACC (*(vu_long*) (CFG_SYS_MBAR+0x1D0014)) +#define MCFCFM_DACC (*(vu_long*) (CFG_SYS_MBAR+0x1D0018)) +#define MCFCFM_USTAT (*(vu_char*) (CFG_SYS_MBAR+0x1D0020)) #define MCFCFM_USTAT_CBEIF 0x80 #define MCFCFM_USTAT_CCIF 0x40 #define MCFCFM_USTAT_PVIOL 0x20 #define MCFCFM_USTAT_ACCERR 0x10 #define MCFCFM_USTAT_BLANK 0x04 -#define MCFCFM_CMD (*(vu_char*) (CONFIG_SYS_MBAR+0x1D0024)) +#define MCFCFM_CMD (*(vu_char*) (CFG_SYS_MBAR+0x1D0024)) #define MCFCFM_CMD_ERSVER 0x05 #define MCFCFM_CMD_PGERSVER 0x06 #define MCFCFM_CMD_PGM 0x20 diff --git a/arch/m68k/lib/bdinfo.c b/arch/m68k/lib/bdinfo.c index 7eca6725a6..0b4629f1c8 100644 --- a/arch/m68k/lib/bdinfo.c +++ b/arch/m68k/lib/bdinfo.c @@ -16,7 +16,7 @@ int arch_setup_bdinfo(void) { struct bd_info *bd = gd->bd; - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ + bd->bi_mbar_base = CFG_SYS_MBAR; /* base of internal registers */ bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ @@ -38,7 +38,7 @@ void arch_print_bdinfo(void) struct bd_info *bd = gd->bd; bdinfo_print_mhz("busfreq", bd->bi_busfreq); -#if defined(CONFIG_SYS_MBAR) +#if defined(CFG_SYS_MBAR) bdinfo_print_num_l("mbar", bd->bi_mbar_base); #endif bdinfo_print_mhz("cpufreq", bd->bi_intfreq); diff --git a/arch/m68k/lib/cache.c b/arch/m68k/lib/cache.c index aa2b93e0e0..4ddda69f5a 100644 --- a/arch/m68k/lib/cache.c +++ b/arch/m68k/lib/cache.c @@ -34,18 +34,18 @@ void icache_enable(void) *cf_icache_status = 1; #if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) - __asm__ __volatile__("movec %0, %%acr2"::"r"(CONFIG_SYS_CACHE_ACR2)); + __asm__ __volatile__("movec %0, %%acr2"::"r"(CFG_SYS_CACHE_ACR2)); __asm__ __volatile__("movec %0, %%acr3"::"r"(CONFIG_SYS_CACHE_ACR3)); #if defined(CONFIG_CF_V4E) __asm__ __volatile__("movec %0, %%acr6"::"r"(CONFIG_SYS_CACHE_ACR6)); __asm__ __volatile__("movec %0, %%acr7"::"r"(CONFIG_SYS_CACHE_ACR7)); #endif #else - __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); - __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); + __asm__ __volatile__("movec %0, %%acr0"::"r"(CFG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CFG_SYS_CACHE_ACR1)); #endif - __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_ICACR)); + __asm__ __volatile__("movec %0, %%cacr"::"r"(CFG_SYS_CACHE_ICACR)); } void icache_disable(void) @@ -72,9 +72,9 @@ void icache_invalid(void) { u32 temp; - temp = CONFIG_SYS_ICACHE_INV; + temp = CFG_SYS_ICACHE_INV; if (*cf_icache_status) - temp |= CONFIG_SYS_CACHE_ICACR; + temp |= CFG_SYS_CACHE_ICACR; __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); } @@ -89,15 +89,15 @@ void dcache_enable(void) *cf_dcache_status = 1; #if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) - __asm__ __volatile__("movec %0, %%acr0"::"r"(CONFIG_SYS_CACHE_ACR0)); - __asm__ __volatile__("movec %0, %%acr1"::"r"(CONFIG_SYS_CACHE_ACR1)); + __asm__ __volatile__("movec %0, %%acr0"::"r"(CFG_SYS_CACHE_ACR0)); + __asm__ __volatile__("movec %0, %%acr1"::"r"(CFG_SYS_CACHE_ACR1)); #if defined(CONFIG_CF_V4E) __asm__ __volatile__("movec %0, %%acr4"::"r"(CONFIG_SYS_CACHE_ACR4)); __asm__ __volatile__("movec %0, %%acr5"::"r"(CONFIG_SYS_CACHE_ACR5)); #endif #endif - __asm__ __volatile__("movec %0, %%cacr"::"r"(CONFIG_SYS_CACHE_DCACR)); + __asm__ __volatile__("movec %0, %%cacr"::"r"(CFG_SYS_CACHE_DCACR)); } void dcache_disable(void) @@ -124,11 +124,11 @@ void dcache_invalid(void) #if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) u32 temp; - temp = CONFIG_SYS_DCACHE_INV; + temp = CFG_SYS_DCACHE_INV; if (*cf_dcache_status) - temp |= CONFIG_SYS_CACHE_DCACR; + temp |= CFG_SYS_CACHE_DCACR; if (*cf_icache_status) - temp |= CONFIG_SYS_CACHE_ICACR; + temp |= CFG_SYS_CACHE_ICACR; __asm__ __volatile__("movec %0, %%cacr"::"r"(temp)); #endif diff --git a/arch/mips/mach-mtmips/mt7621/spl/start.S b/arch/mips/mach-mtmips/mt7621/spl/start.S index 6b9f253952..7063f32610 100644 --- a/arch/mips/mach-mtmips/mt7621/spl/start.S +++ b/arch/mips/mach-mtmips/mt7621/spl/start.S @@ -19,7 +19,7 @@ #ifndef CONFIG_SYS_INIT_SP_ADDR #define CONFIG_SYS_INIT_SP_ADDR (CFG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_SP_OFFSET) + CFG_SYS_INIT_SP_OFFSET) #endif #define SP_ADDR_TEMP 0xbe10dff0 diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 33835eeec2..63c2729411 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -77,10 +77,10 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ SCCR_TSECCM | #endif -#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ +#ifdef CFG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ SCCR_TSEC1CM | #endif -#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ +#ifdef CFG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ SCCR_TSEC2CM | #endif #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ @@ -92,10 +92,10 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ SCCR_USBMPHCM | #endif -#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ +#ifdef CFG_SYS_SCCR_USBDRCM /* USB DR clock mode */ SCCR_USBDRCM | #endif -#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ +#ifdef CFG_SYS_SCCR_SATACM /* SATA controller clock mode */ SCCR_SATACM | #endif 0; @@ -115,11 +115,11 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */ (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) | #endif -#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ - (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | +#ifdef CFG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */ + (CFG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) | #endif -#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ - (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | +#ifdef CFG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */ + (CFG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) | #endif #ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */ (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) | @@ -130,11 +130,11 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */ (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) | #endif -#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */ - (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | +#ifdef CFG_SYS_SCCR_USBDRCM /* USB DR clock mode */ + (CFG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) | #endif -#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */ - (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | +#ifdef CFG_SYS_SCCR_SATACM /* SATA controller clock mode */ + (CFG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) | #endif 0; @@ -175,26 +175,26 @@ void cpu_init_f (volatile immap_t * im) setbits_be32(&im->sysconf.spcr, SPCR_TBEN); /* System General Purpose Register */ -#ifdef CONFIG_SYS_SICRH +#ifdef CFG_SYS_SICRH #if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8313) /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */ - __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH, + __raw_writel((im->sysconf.sicrh & 0x0000000C) | CFG_SYS_SICRH, &im->sysconf.sicrh); #else - __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh); + __raw_writel(CFG_SYS_SICRH, &im->sysconf.sicrh); #endif #endif -#ifdef CONFIG_SYS_SICRL - __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); +#ifdef CFG_SYS_SICRL + __raw_writel(CFG_SYS_SICRL, &im->sysconf.sicrl); #endif -#ifdef CONFIG_SYS_GPR1 - __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1); +#ifdef CFG_SYS_GPR1 + __raw_writel(CFG_SYS_GPR1, &im->sysconf.gpr1); #endif -#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ - __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); +#ifdef CFG_SYS_DDRCDR /* DDR control driver register */ + __raw_writel(CFG_SYS_DDRCDR, &im->sysconf.ddrcdr); #endif -#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */ - __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir); +#ifdef CFG_SYS_OBIR /* Output buffer impedance register */ + __raw_writel(CFG_SYS_OBIR, &im->sysconf.obir); #endif #if !defined(CONFIG_PINCTRL) diff --git a/arch/powerpc/cpu/mpc83xx/spd_sdram.c b/arch/powerpc/cpu/mpc83xx/spd_sdram.c index 6d1c6b055c..4f982b8303 100644 --- a/arch/powerpc/cpu/mpc83xx/spd_sdram.c +++ b/arch/powerpc/cpu/mpc83xx/spd_sdram.c @@ -59,9 +59,9 @@ void board_add_ram_info(int use_default) printf(", %s MHz)", strmhz(buf, gd->mem_clk)); -#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE) +#if defined(CONFIG_SYS_LB_SDRAM) && defined(CFG_SYS_LBC_SDRAM_SIZE) puts("\nSDRAM: "); - print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); + print_size (CFG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)"); #endif } @@ -204,12 +204,12 @@ long int spd_sdram() return 0; } -#ifdef CONFIG_SYS_DDRCDR_VALUE +#ifdef CFG_SYS_DDRCDR_VALUE /* * Adjust DDR II IO voltage biasing. It just makes it work. */ if(spd.mem_type == SPD_MEMTYPE_DDR2) { - immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; + immap->sysconf.ddrcdr = CFG_SYS_DDRCDR_VALUE; } udelay(50000); #endif @@ -693,7 +693,7 @@ long int spd_sdram() ddr->sdram_mode = (0 | (1 << (16 + 10)) /* DQS Differential disable */ -#ifdef CONFIG_SYS_DDR_MODE_WEAK +#ifdef CFG_SYS_DDR_MODE_WEAK | (1 << (16 + 1)) /* weak driver (~60%) */ #endif | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */ @@ -767,8 +767,8 @@ long int spd_sdram() debug("DDR: sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg2); } -#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */ - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; +#ifdef CFG_SYS_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */ + ddr->sdram_clk_cntl = CFG_SYS_DDR_SDRAM_CLK_CNTL; #endif debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl); diff --git a/arch/powerpc/cpu/mpc83xx/spl_minimal.c b/arch/powerpc/cpu/mpc83xx/spl_minimal.c index 8fcf20854e..7cc0383afb 100644 --- a/arch/powerpc/cpu/mpc83xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc83xx/spl_minimal.c @@ -54,12 +54,12 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.spcr |= SPCR_TBEN; /* DDR control driver register */ -#ifdef CONFIG_SYS_DDRCDR - im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR; +#ifdef CFG_SYS_DDRCDR + im->sysconf.ddrcdr = CFG_SYS_DDRCDR; #endif /* Output buffer impedance register */ -#ifdef CONFIG_SYS_OBIR - im->sysconf.obir = CONFIG_SYS_OBIR; +#ifdef CFG_SYS_OBIR + im->sysconf.obir = CFG_SYS_OBIR; #endif /* diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 8a351b927c..52326f0ec1 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -246,7 +246,7 @@ in_flash: #if CONFIG_VAL(SYS_MALLOC_F_LEN) -#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif @@ -486,7 +486,7 @@ init_e300_core: /* time t 10 */ #if defined(CONFIG_WATCHDOG) /* Initialise the Watchdog values and reset it (if req) */ /*------------------------------------------------------*/ - lis r4, CONFIG_SYS_WATCHDOG_VALUE + lis r4, CFG_SYS_WATCHDOG_VALUE ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) stw r4, SWCRR(r3) @@ -1048,10 +1048,10 @@ trap_init: lock_ram_in_cache: /* Allocate Initial RAM in data cache. */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ - (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 + lis r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@h + ori r3, r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@l + li r4, ((CFG_SYS_INIT_RAM_SIZE & ~31) + \ + (CFG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: dcbz r0, r3 @@ -1070,10 +1070,10 @@ lock_ram_in_cache: .globl unlock_ram_in_cache unlock_ram_in_cache: /* invalidate the INIT_RAM section */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l - li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \ - (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 + lis r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@h + ori r3, r3, (CFG_SYS_INIT_RAM_ADDR & ~31)@l + li r4, ((CFG_SYS_INIT_RAM_SIZE & ~31) + \ + (CFG_SYS_INIT_RAM_ADDR & 31) + 31) / 32 mtctr r4 1: icbi r0, r3 dcbi r0, r3 @@ -1122,14 +1122,14 @@ map_flash_by_law1: * LBIU Local Access Widow 0 will not cover this memory space. So, we * need another window to map in it. */ - lis r4, (CONFIG_SYS_FLASH_BASE)@h - ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l - stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */ + lis r4, (CFG_SYS_FLASH_BASE)@h + ori r4, r4, (CFG_SYS_FLASH_BASE)@l + stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_SYS_FLASH_BASE */ - /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */ + /* Store 0x80000012 + log2(CFG_SYS_FLASH_SIZE) into LBLAWAR1 */ lis r4, (0x80000012)@h ori r4, r4, (0x80000012)@l - li r5, CONFIG_SYS_FLASH_SIZE + li r5, CFG_SYS_FLASH_SIZE 1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ addi r4, r4, 1 bne 1b @@ -1150,24 +1150,24 @@ remap_flash_by_law0: lwz r4, BR0(r3) li r5, 0x7FFF and r4, r4, r5 - lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h - ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l + lis r5, (CFG_SYS_FLASH_BASE & 0xFFFF8000)@h + ori r5, r5, (CFG_SYS_FLASH_BASE & 0xFFFF8000)@l or r5, r5, r4 - stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */ + stw r5, BR0(r3) /* r5 <= (CFG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */ lwz r4, OR0(r3) - lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1) + lis r5, ~((CFG_SYS_FLASH_SIZE << 4) - 1) or r4, r4, r5 stw r4, OR0(r3) - lis r4, (CONFIG_SYS_FLASH_BASE)@h - ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l - stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */ + lis r4, (CFG_SYS_FLASH_BASE)@h + ori r4, r4, (CFG_SYS_FLASH_BASE)@l + stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_SYS_FLASH_BASE */ - /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */ + /* Store 0x80000012 + log2(CFG_SYS_FLASH_SIZE) into LBLAWAR0 */ lis r4, (0x80000012)@h ori r4, r4, (0x80000012)@l - li r5, CONFIG_SYS_FLASH_SIZE + li r5, CFG_SYS_FLASH_SIZE 1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */ addi r4, r4, 1 bne 1b diff --git a/arch/powerpc/cpu/mpc83xx/sysio/sysio.h b/arch/powerpc/cpu/mpc83xx/sysio/sysio.h index f8c2f104c1..b2f98074fc 100644 --- a/arch/powerpc/cpu/mpc83xx/sysio/sysio.h +++ b/arch/powerpc/cpu/mpc83xx/sysio/sysio.h @@ -1,7 +1,7 @@ #ifdef CONFIG_ARCH_MPC8308 -#ifndef CONFIG_SYS_SICRL -#define CONFIG_SYS_SICRL (\ +#ifndef CFG_SYS_SICRL +#define CFG_SYS_SICRL (\ CONFIG_SICRL_SPI |\ CONFIG_SICRL_UART |\ CONFIG_SICRL_IRQ |\ @@ -10,8 +10,8 @@ ) #endif -#ifndef CONFIG_SYS_SICRH -#define CONFIG_SYS_SICRH (\ +#ifndef CFG_SYS_SICRH +#define CFG_SYS_SICRH (\ CONFIG_SICRH_ESDHC_A |\ CONFIG_SICRH_ESDHC_B |\ CONFIG_SICRH_ESDHC_C |\ diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 3dccc0e106..013a171ed8 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 27, 1, 0), SET_QP_INFO(2, 28, 1, 0), diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index ed890114ec..c7d473d4a1 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -23,7 +23,7 @@ */ static void check_erratum_a4849(uint32_t svr) { - void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000; + void __iomem *dcsr = (void *)CFG_SYS_DCSRBAR + 0xb0000; unsigned int i; #if defined(CONFIG_ARCH_P2041) || defined(CONFIG_ARCH_P3041) @@ -120,7 +120,7 @@ static void check_erratum_a4580(uint32_t svr) */ static void check_erratum_a007212(void) { - u32 __iomem *plldgdcr = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20); + u32 __iomem *plldgdcr = (void *)(CFG_SYS_DCSRBAR + 0x21c20); if (in_be32(plldgdcr) & 0x1fe) { /* check if PLL ratio is set by workaround */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 6acd31d284..74ad7483dc 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -417,7 +417,7 @@ void print_reginfo(void) /* Common ddr init for non-corenet fsl 85xx platforms */ #ifndef CONFIG_FSL_CORENET #if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \ - !defined(CONFIG_SYS_INIT_L2_ADDR) + !defined(CFG_SYS_INIT_L2_ADDR) int dram_init(void) { #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) || \ @@ -486,7 +486,7 @@ int dram_init(void) #endif /* CONFIG_SYS_RAMBOOT */ #endif -#if CONFIG_POST & CONFIG_SYS_POST_MEMORY +#if CONFIG_POST & CFG_SYS_POST_MEMORY /* Board-specific functions defined in each board's ddr.c */ void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd, @@ -591,7 +591,7 @@ static void dump_spd_ddr_reg(void) /* invalid the TLBs for DDR and setup new ones to cover p_addr */ static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset) { - u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE; + u32 vstart = CFG_SYS_DDR_SDRAM_BASE; unsigned long epn; u32 tsize, valid, ptr; int ddr_esel; @@ -624,8 +624,8 @@ int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset) phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED); #if !defined(CONFIG_PHYS_64BIT) || \ - !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \ - (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) + !defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \ + (CFG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) test_cap = p_size; #else test_cap = gd->ram_size; @@ -635,7 +635,7 @@ int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset) p_size = min(test_cap - p_addr, CONFIG_MAX_MEM_MAPPED); if (reset_tlb(p_addr, p_size, phys_offset) == -1) return -1; - *vstart = CONFIG_SYS_DDR_SDRAM_BASE; + *vstart = CFG_SYS_DDR_SDRAM_BASE; *size = (u32) p_size; printf("Testing 0x%08llx - 0x%08llx\n", (u64)(*vstart) + (*phys_offset), @@ -651,13 +651,13 @@ int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset) { phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED); - *vstart = CONFIG_SYS_DDR_SDRAM_BASE; + *vstart = CFG_SYS_DDR_SDRAM_BASE; *size = (u32) p_size; /* CONFIG_MAX_MEM_MAPPED < 4G */ *phys_offset = 0; #if !defined(CONFIG_PHYS_64BIT) || \ - !defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \ - (CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) + !defined(CFG_SYS_INIT_RAM_ADDR_PHYS) || \ + (CFG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull) if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) { puts("Cannot test more than "); print_size(CONFIG_MAX_MEM_MAPPED, diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 2c320b202e..f07e8ab388 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -165,7 +165,7 @@ void disable_cpc_sram(void) for (i = 0; i < CFG_SYS_NUM_CPC; i++, cpc++) { if (in_be32(&cpc->cpcsrcr0) & CPC_SRCR0_SRAMEN) { /* find and disable LAW of SRAM */ - struct law_entry law = find_law(CONFIG_SYS_INIT_L3_ADDR); + struct law_entry law = find_law(CFG_SYS_INIT_L3_ADDR); if (law.index == -1) { printf("\nFatal error happened\n"); @@ -315,15 +315,15 @@ void fsl_erratum_a007212_workaround(void) { ccsr_gur_t __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); u32 ddr_pll_ratio; - u32 __iomem *plldgdcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c20); - u32 __iomem *plldadcr1 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c28); - u32 __iomem *dpdovrcr4 = (void *)(CONFIG_SYS_DCSRBAR + 0x21e80); + u32 __iomem *plldgdcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c20); + u32 __iomem *plldadcr1 = (void *)(CFG_SYS_DCSRBAR + 0x21c28); + u32 __iomem *dpdovrcr4 = (void *)(CFG_SYS_DCSRBAR + 0x21e80); #if (CONFIG_SYS_NUM_DDR_CTLRS >= 2) - u32 __iomem *plldgdcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c40); - u32 __iomem *plldadcr2 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c48); + u32 __iomem *plldgdcr2 = (void *)(CFG_SYS_DCSRBAR + 0x21c40); + u32 __iomem *plldadcr2 = (void *)(CFG_SYS_DCSRBAR + 0x21c48); #if (CONFIG_SYS_NUM_DDR_CTLRS >= 3) - u32 __iomem *plldgdcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c60); - u32 __iomem *plldadcr3 = (void *)(CONFIG_SYS_DCSRBAR + 0x21c68); + u32 __iomem *plldgdcr3 = (void *)(CFG_SYS_DCSRBAR + 0x21c60); + u32 __iomem *plldadcr3 = (void *)(CFG_SYS_DCSRBAR + 0x21c68); #endif #endif /* @@ -378,7 +378,7 @@ void fsl_erratum_a007212_workaround(void) ulong cpu_init_f(void) { extern void m8560_cpm_reset (void); -#ifdef CONFIG_SYS_DCSRBAR_PHYS +#ifdef CFG_SYS_DCSRBAR_PHYS ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); #endif #if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT) @@ -403,7 +403,7 @@ ulong cpu_init_f(void) #if defined(CONFIG_NXP_ESBC) && !defined(CONFIG_SYS_RAMBOOT) /* Disable the LAW created for NOR flash by the PBI commands */ - law = find_law(CONFIG_SYS_PBI_FLASH_BASE); + law = find_law(CFG_SYS_PBI_FLASH_BASE); if (law.index != -1) disable_law(law.index); @@ -430,7 +430,7 @@ ulong cpu_init_f(void) /* Invalidate the CPC before DDR gets enabled */ invalidate_cpc(); - #ifdef CONFIG_SYS_DCSRBAR_PHYS + #ifdef CFG_SYS_DCSRBAR_PHYS /* set DCSRCR so that DCSR space is 1G */ setbits_be32(&gur->dcsrcr, FSL_CORENET_DCSR_SZ_1G); in_be32(&gur->dcsrcr); @@ -533,7 +533,7 @@ int l2cache_init(void) asm("msync;isync"); cache_ctl = l2cache->l2ctl; -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L2_ADDR) if (cache_ctl & MPC85xx_L2CTL_L2E) { /* Clear L2 SRAM memory-mapped base address */ out_be32(&l2cache->l2srbar0, 0x0); @@ -590,15 +590,15 @@ int l2cache_init(void) if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) { puts("already enabled"); -#if defined(CONFIG_SYS_INIT_L2_ADDR) && defined(CONFIG_SYS_FLASH_BASE) +#if defined(CFG_SYS_INIT_L2_ADDR) && defined(CFG_SYS_FLASH_BASE) u32 l2srbar = l2cache->l2srbar0; if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE - && l2srbar >= CONFIG_SYS_FLASH_BASE) { - l2srbar = CONFIG_SYS_INIT_L2_ADDR; + && l2srbar >= CFG_SYS_FLASH_BASE) { + l2srbar = CFG_SYS_INIT_L2_ADDR; l2cache->l2srbar0 = l2srbar; - printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR); + printf(", moving to 0x%08x", CFG_SYS_INIT_L2_ADDR); } -#endif /* CONFIG_SYS_INIT_L2_ADDR */ +#endif /* CFG_SYS_INIT_L2_ADDR */ puts("\n"); } else { asm("msync;isync"); @@ -625,9 +625,9 @@ int l2cache_init(void) #endif /* enable the cache */ - mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0); + mtspr(SPRN_L2CSR0, CFG_SYS_INIT_L2CSR0); - if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { + if (CFG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E)) ; print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n"); @@ -656,7 +656,7 @@ skip_l2: int cpu_init_r(void) { __maybe_unused u32 svr = get_svr(); -#ifdef CONFIG_SYS_LBC_LCRR +#ifdef CFG_SYS_LBC_LCRR fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; #endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) @@ -763,13 +763,13 @@ int cpu_init_r(void) #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 if (IS_SVR_REV(svr, 1, 0)) { int i; - __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c; + __be32 *p = (void __iomem *)CFG_SYS_DCSRBAR + 0xb004c; for (i = 0; i < 12; i++) { p += i + (i > 5 ? 11 : 0); out_be32(p, 0x2); } - p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108; + p = (void __iomem *)CFG_SYS_DCSRBAR + 0xb0108; out_be32(p, 0x34); } #endif @@ -799,18 +799,18 @@ int cpu_init_r(void) { if (SVR_MAJ(svr) < 3) { void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + p = (void *)CFG_SYS_DCSRBAR + 0x20520; setbits_be32(p, 1 << (31 - 14)); } } #endif -#ifdef CONFIG_SYS_LBC_LCRR +#ifdef CFG_SYS_LBC_LCRR /* * Modify the CLKDIV field of LCRR register to improve the writing * speed for NOR flash. */ - clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR); + clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CFG_SYS_LBC_LCRR); __raw_readl(&lbc->lcrr); isync(); #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 @@ -850,7 +850,7 @@ int cpu_init_r(void) */ if (IS_SVR_REV(get_svr(), 1, 0)) { struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *) - (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET); + (CFG_SYS_DCSRBAR + CFG_SYS_DCSR_DCFG_OFFSET); setbits_be32(&dcfg->ecccr1, (DCSR_DCFG_ECC_DISABLE_USB1 | DCSR_DCFG_ECC_DISABLE_USB2)); diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 18bfa2aed1..a67f37e3af 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -17,15 +17,15 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_A003399_NOR_WORKAROUND void setup_ifc(void) { - struct fsl_ifc ifc_regs = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + struct fsl_ifc ifc_regs = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL}; u32 _mas0, _mas1, _mas2, _mas3, _mas7; - phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS; + phys_addr_t flash_phys = CFG_SYS_FLASH_BASE_PHYS; /* * Adjust the TLB we were running out of to match the phys addr of the * chip select we are adjusting and will return to. */ - flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024; + flash_phys += (~CFG_SYS_AMASK0) + 1 - 4*1024*1024; _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15); _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT | @@ -52,7 +52,7 @@ void setup_ifc(void) * * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * bacause flash's physical address is going to change as - * CONFIG_SYS_FLASH_BASE_PHYS. + * CFG_SYS_FLASH_BASE_PHYS. */ _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(CONFIG_SYS_PPC_E500_DEBUG_TLB); @@ -72,9 +72,9 @@ void setup_ifc(void) #endif /* Change flash's physical address */ - ifc_out32(&(ifc_regs.gregs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0); - ifc_out32(&(ifc_regs.gregs->csor_cs[0].csor), CONFIG_SYS_CSOR0); - ifc_out32(&(ifc_regs.gregs->amask_cs[0].amask), CONFIG_SYS_AMASK0); + ifc_out32(&(ifc_regs.gregs->cspr_cs[0].cspr), CFG_SYS_CSPR0); + ifc_out32(&(ifc_regs.gregs->csor_cs[0].csor), CFG_SYS_CSOR0); + ifc_out32(&(ifc_regs.gregs->amask_cs[0].amask), CFG_SYS_AMASK0); return; } @@ -101,7 +101,7 @@ void cpu_init_early_f(void *fdt) #ifdef CONFIG_ARCH_QEMU_E500 /* - * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, + * CFG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, * so we need to populate it before it accesses it. */ gd->fdt_blob = fdt; @@ -109,9 +109,9 @@ void cpu_init_early_f(void *fdt) mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13); mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M); - mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G); - mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR); - mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS); + mas2 = FSL_BOOKE_MAS2(CFG_SYS_CCSRBAR, MAS2_I|MAS2_G); + mas3 = FSL_BOOKE_MAS3(CFG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(CFG_SYS_CCSRBAR_PHYS); write_tlb(mas0, mas1, mas2, mas3, mas7); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 32348b4e14..a7e1df104d 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -144,14 +144,14 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) } #ifdef CONFIG_DEEP_SLEEP #ifdef CONFIG_SPL_MMC_BOOT - off = fdt_add_mem_rsv(blob, CONFIG_SYS_MMC_U_BOOT_START, - CONFIG_SYS_MMC_U_BOOT_SIZE); + off = fdt_add_mem_rsv(blob, CFG_SYS_MMC_U_BOOT_START, + CFG_SYS_MMC_U_BOOT_SIZE); if (off < 0) printf("Failed to reserve memory for SD deep sleep: %s\n", fdt_strerror(off)); #elif defined(CONFIG_SPL_SPI_BOOT) - off = fdt_add_mem_rsv(blob, CONFIG_SYS_SPI_FLASH_U_BOOT_START, - CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE); + off = fdt_add_mem_rsv(blob, CFG_SYS_SPI_FLASH_U_BOOT_START, + CFG_SYS_SPI_FLASH_U_BOOT_SIZE); if (off < 0) printf("Failed to reserve memory for SPI deep sleep: %s\n", fdt_strerror(off)); @@ -448,7 +448,7 @@ void fdt_add_enet_stashing(void *fdt) static void ft_fixup_clks(void *blob, const char *compat, u32 offset, unsigned long freq) { - phys_addr_t phys = offset + CONFIG_SYS_CCSRBAR_PHYS; + phys_addr_t phys = offset + CFG_SYS_CCSRBAR_PHYS; int off = fdt_node_offset_by_compat_reg(blob, compat, phys); if (off >= 0) { @@ -679,17 +679,17 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) ft_fixup_dpaa_clks(blob); -#if defined(CONFIG_SYS_BMAN_MEM_PHYS) +#if defined(CFG_SYS_BMAN_MEM_PHYS) fdt_portal(blob, "fsl,bman-portal", "bman-portals", - (u64)CONFIG_SYS_BMAN_MEM_PHYS, - CONFIG_SYS_BMAN_MEM_SIZE); + (u64)CFG_SYS_BMAN_MEM_PHYS, + CFG_SYS_BMAN_MEM_SIZE); fdt_fixup_bportals(blob); #endif -#if defined(CONFIG_SYS_QMAN_MEM_PHYS) +#if defined(CFG_SYS_QMAN_MEM_PHYS) fdt_portal(blob, "fsl,qman-portal", "qman-portals", - (u64)CONFIG_SYS_QMAN_MEM_PHYS, - CONFIG_SYS_QMAN_MEM_SIZE); + (u64)CFG_SYS_QMAN_MEM_PHYS, + CFG_SYS_QMAN_MEM_SIZE); fdt_fixup_qportals(blob); #endif @@ -737,7 +737,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) * beginning of CCSR. */ #define CCSR_VIRT_TO_PHYS(x) \ - (CONFIG_SYS_CCSRBAR_PHYS + ((x) - CONFIG_SYS_CCSRBAR)) + (CFG_SYS_CCSRBAR_PHYS + ((x) - CFG_SYS_CCSRBAR)) static void msg(const char *name, uint64_t uaddr, uint64_t daddr) { @@ -783,8 +783,8 @@ int ft_verify_fdt(void *fdt) return 0; } - if (addr != CONFIG_SYS_CCSRBAR_PHYS) { - msg("CCSR", CONFIG_SYS_CCSRBAR_PHYS, addr); + if (addr != CFG_SYS_CCSRBAR_PHYS) { + msg("CCSR", CFG_SYS_CCSRBAR_PHYS, addr); /* No point in checking anything else */ return 0; } @@ -818,12 +818,12 @@ int ft_verify_fdt(void *fdt) * the 'reg' property to be wrong, so check it here. For now, we * only check for "fsl,elbc" nodes. */ -#ifdef CONFIG_SYS_LBC_ADDR +#ifdef CFG_SYS_LBC_ADDR off = fdt_node_offset_by_compatible(fdt, -1, "fsl,elbc"); if (off > 0) { const fdt32_t *reg = fdt_getprop(fdt, off, "reg", NULL); if (reg) { - uint64_t uaddr = CCSR_VIRT_TO_PHYS(CONFIG_SYS_LBC_ADDR); + uint64_t uaddr = CCSR_VIRT_TO_PHYS(CFG_SYS_LBC_ADDR); addr = fdt_translate_address(fdt, off, reg); if (uaddr != addr) { diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 3a6ce32f7e..9b6577e547 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -203,7 +203,7 @@ void serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift, memset(serdes_prtcl_map, 0, sizeof(u8) * SERDES_PRCTL_COUNT); #ifdef CONFIG_SYS_FSL_ERRATUM_A007186 struct ccsr_sfp_regs __iomem *sfp_regs = - (struct ccsr_sfp_regs __iomem *)(CONFIG_SYS_SFP_ADDR); + (struct ccsr_sfp_regs __iomem *)(CFG_SYS_SFP_ADDR); u32 pll_num, pll_status, bc, dc, fc, pll_cr_upd, pll_cr0, pll_cr1; u32 bc_status, fc_status, dc_status, pll_sr2; serdes_corenet_t __iomem *srds_regs = (void *)sd_addr; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 437ecde615..7c2de02c4c 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -264,9 +264,9 @@ void serdes_reset_rx(enum srds_prtcl device) } #endif -#ifndef CONFIG_SYS_DCSRBAR_PHYS -#define CONFIG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ -#define CONFIG_SYS_DCSRBAR 0x80000000 +#ifndef CFG_SYS_DCSRBAR_PHYS +#define CFG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ +#define CFG_SYS_DCSRBAR 0x80000000 #define __DCSR_NOT_DEFINED_BY_CONFIG #endif @@ -315,16 +315,16 @@ static void enable_bank(ccsr_gur_t *gur, int bank) */ { #ifdef __DCSR_NOT_DEFINED_BY_CONFIG - struct law_entry law = find_law(CONFIG_SYS_DCSRBAR_PHYS); + struct law_entry law = find_law(CFG_SYS_DCSRBAR_PHYS); int law_index; if (law.index == -1) - law_index = set_next_law(CONFIG_SYS_DCSRBAR_PHYS, + law_index = set_next_law(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_DCSR); else - set_law(law.index, CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, + set_law(law.index, CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_DCSR); #endif - u32 *p = (void *)CONFIG_SYS_DCSRBAR + 0x20114; + u32 *p = (void *)CFG_SYS_DCSRBAR + 0x20114; out_be32(p, rcw5); #ifdef __DCSR_NOT_DEFINED_BY_CONFIG if (law.index == -1) diff --git a/arch/powerpc/cpu/mpc85xx/p2041_ids.c b/arch/powerpc/cpu/mpc85xx/p2041_ids.c index 2b790868e1..540a6e6e19 100644 --- a/arch/powerpc/cpu/mpc85xx/p2041_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p2041_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 2, 1, 0), SET_QP_INFO(3, 4, 2, 1), diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c index 7db05d9672..8f645258a5 100644 --- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 2, 1, 0), SET_QP_INFO(3, 4, 2, 1), diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c index ba54b0310a..db41116202 100644 --- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO( 1, 2, 1, 0), SET_QP_INFO( 3, 4, 2, 1), diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c index 6f11c81aba..bd05eae255 100644 --- a/arch/powerpc/cpu/mpc85xx/p5040_ids.c +++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 2, 1, 0), SET_QP_INFO(3, 4, 2, 1), diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index d37e1ccf1e..391751ce1e 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -276,8 +276,8 @@ __secondary_start_page: mtspr SPRN_L2CSR1,r3 #endif - lis r3,CONFIG_SYS_INIT_L2CSR0@h - ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l + lis r3,CFG_SYS_INIT_L2CSR0@h + ori r3,r3,CFG_SYS_INIT_L2CSR0@l mtspr SPRN_L2CSR0,r3 isync 2: diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index e2bdc2f9f1..a6e352ceab 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -218,22 +218,22 @@ void get_sys_info(sys_info_t *sys_info) #ifndef CONFIG_PME_PLAT_CLK_DIV switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { case 1: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK]; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK]; break; case 2: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 2; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK] / 2; break; case 3: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 3; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK] / 3; break; case 4: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK] / 4; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK] / 4; break; case 6: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 2; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK + 1] / 2; break; case 7: - sys_info->freq_pme = freq_c_pll[CONFIG_SYS_PME_CLK + 1] / 3; + sys_info->freq_pme = freq_c_pll[CFG_SYS_PME_CLK + 1] / 3; break; default: printf("Error: Unknown PME clock select!\n"); @@ -243,7 +243,7 @@ void get_sys_info(sys_info_t *sys_info) } #else - sys_info->freq_pme = sys_info->freq_systembus / CONFIG_SYS_PME_CLK; + sys_info->freq_pme = sys_info->freq_systembus / CFG_SYS_PME_CLK; #endif #endif @@ -380,25 +380,25 @@ void get_sys_info(sys_info_t *sys_info) #ifndef CONFIG_FM_PLAT_CLK_DIV switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { case 1: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK]; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK]; break; case 2: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 2; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK] / 2; break; case 3: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 3; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK] / 3; break; case 4: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK] / 4; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK] / 4; break; case 5: sys_info->freq_fman[0] = sys_info->freq_systembus; break; case 6: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 2; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK + 1] / 2; break; case 7: - sys_info->freq_fman[0] = freq_c_pll[CONFIG_SYS_FM1_CLK + 1] / 3; + sys_info->freq_fman[0] = freq_c_pll[CFG_SYS_FM1_CLK + 1] / 3; break; default: printf("Error: Unknown FMan1 clock select!\n"); @@ -407,31 +407,31 @@ void get_sys_info(sys_info_t *sys_info) break; } #if (CFG_SYS_NUM_FMAN) == 2 -#ifdef CONFIG_SYS_FM2_CLK +#ifdef CFG_SYS_FM2_CLK #define FM2_CLK_SEL 0x00000038 #define FM2_CLK_SHIFT 3 rcw_tmp = in_be32(&gur->rcwsr[15]); switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { case 1: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1]; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK + 1]; break; case 2: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 2; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK + 1] / 2; break; case 3: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 3; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK + 1] / 3; break; case 4: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK + 1] / 4; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK + 1] / 4; break; case 5: sys_info->freq_fman[1] = sys_info->freq_systembus; break; case 6: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 2; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK] / 2; break; case 7: - sys_info->freq_fman[1] = freq_c_pll[CONFIG_SYS_FM2_CLK] / 3; + sys_info->freq_fman[1] = freq_c_pll[CFG_SYS_FM2_CLK] / 3; break; default: printf("Error: Unknown FMan2 clock select!\n"); @@ -442,7 +442,7 @@ void get_sys_info(sys_info_t *sys_info) #endif #endif /* CFG_SYS_NUM_FMAN == 2 */ #else - sys_info->freq_fman[0] = sys_info->freq_systembus / CONFIG_SYS_FM1_CLK; + sys_info->freq_fman[0] = sys_info->freq_systembus / CFG_SYS_FM1_CLK; #endif #endif diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index 47df3c2ce1..ce2b9c2166 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -14,10 +14,10 @@ DECLARE_GLOBAL_DATA_PTR; ulong cpu_init_f(void) { -#ifdef CONFIG_SYS_INIT_L2_ADDR +#ifdef CFG_SYS_INIT_L2_ADDR ccsr_l2cache_t *l2cache = (void *)CFG_SYS_MPC85xx_L2_ADDR; - out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR); + out_be32(&l2cache->l2srbar0, CFG_SYS_INIT_L2_ADDR); /* set MBECCDIS=1, SBECCDIS=1 */ out_be32(&l2cache->l2errdis, diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 5341756974..562b6993b9 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -128,7 +128,7 @@ bootsect: .Lconf_pair_start: .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2SRBAR0 /* Address: L2 memory-mapped SRAM base addr 0 */ - .long CONFIG_SYS_INIT_L2_ADDR + .long CFG_SYS_INIT_L2_ADDR .long CONFIG_SYS_CCSRBAR_DEFAULT + CFG_SYS_MPC85xx_L2_OFFSET + MPC85xx_L2ERRDIS /* Address: L2 cache error disable */ .long MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC @@ -428,12 +428,12 @@ l2_disabled: mtspr SPRN_BUCSR,r0 #endif -#if defined(CONFIG_SYS_INIT_DBCR) +#if defined(CFG_SYS_INIT_DBCR) lis r1,0xffff ori r1,r1,0xffff mtspr DBSR,r1 /* Clear all status bits */ - lis r0,CONFIG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */ - ori r0,r0,CONFIG_SYS_INIT_DBCR@l + lis r0,CFG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */ + ori r0,r0,CFG_SYS_INIT_DBCR@l mtspr DBCR0,r0 #endif @@ -573,34 +573,34 @@ nexti: mflr r1 /* R1 = our PC */ * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for * long-term TLBs, so we use TLB0 here. */ -#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CFG_SYS_CCSRBAR_PHYS) -#if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW) -#error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined." +#if !defined(CFG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CFG_SYS_CCSRBAR_PHYS_LOW) +#error "CFG_SYS_CCSRBAR_PHYS_HIGH and CFG_SYS_CCSRBAR_PHYS_LOW) must be defined." #endif create_ccsr_new_tlb: /* * Create a TLB for the new location of CCSR. Register R8 is reserved - * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR). + * for the virtual address of this TLB (CFG_SYS_CCSRBAR). */ - lis r8, CONFIG_SYS_CCSRBAR@h - ori r8, r8, CONFIG_SYS_CCSRBAR@l - lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h - ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l + lis r8, CFG_SYS_CCSRBAR@h + ori r8, r8, CFG_SYS_CCSRBAR@l + lis r9, (CFG_SYS_CCSRBAR + 0x1000)@h + ori r9, r9, (CFG_SYS_CCSRBAR + 0x1000)@l create_tlb0_entry 0, \ 0, BOOKE_PAGESZ_4K, \ - CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ - CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ - CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + CFG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CFG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CFG_SYS_CCSRBAR_PHYS_HIGH, r3 /* * Create a TLB for the current location of CCSR. Register R9 is reserved - * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). + * for the virtual address of this TLB (CFG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: create_tlb0_entry 1, \ 0, BOOKE_PAGESZ_4K, \ - CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CFG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ 0, r3 /* The default CCSR address is always a 32-bit number */ @@ -634,7 +634,7 @@ infinite_debug_loop: #ifdef CONFIG_FSL_CORENET -#define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) +#define CCSR_LAWBARH0 (CFG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_4K 0xb #define CCSRBAR_LAWAR (LAW_EN | (0x1e << 20) | LAW_SIZE_4K) #define CCSRAR_C 0x80000000 /* Commit */ @@ -644,10 +644,10 @@ create_temp_law: * On CoreNet systems, we create the temporary LAW using a special LAW * target ID of 0x1e. LAWBARH is at offset 0xc00 in CCSR. */ - lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h - ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r0, CFG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CFG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CFG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CFG_SYS_CCSRBAR_PHYS_LOW@l lis r2, CCSRBAR_LAWAR@h ori r2, r2, CCSRBAR_LAWAR@l @@ -683,10 +683,10 @@ read_old_ccsrbar: * instruction. */ write_new_ccsrbar: - lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h - ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l + lis r0, CFG_SYS_CCSRBAR_PHYS_HIGH@h + ori r0, r0, CFG_SYS_CCSRBAR_PHYS_HIGH@l + lis r1, CFG_SYS_CCSRBAR_PHYS_LOW@h + ori r1, r1, CFG_SYS_CCSRBAR_PHYS_LOW@l lis r2, CCSRAR_C@h ori r2, r2, CCSRAR_C@l @@ -723,9 +723,9 @@ write_new_ccsrbar: lwz r0, 0(r9) isync -/* CONFIG_SYS_CCSRBAR_PHYS right shifted by 12 */ -#define CCSRBAR_PHYS_RS12 ((CONFIG_SYS_CCSRBAR_PHYS_HIGH << 20) | \ - (CONFIG_SYS_CCSRBAR_PHYS_LOW >> 12)) +/* CFG_SYS_CCSRBAR_PHYS right shifted by 12 */ +#define CCSRBAR_PHYS_RS12 ((CFG_SYS_CCSRBAR_PHYS_HIGH << 20) | \ + (CFG_SYS_CCSRBAR_PHYS_LOW >> 12)) /* Write the new value to CCSRBAR. */ lis r0, CCSRBAR_PHYS_RS12@h @@ -752,10 +752,10 @@ write_new_ccsrbar: /* Delete the temporary TLBs */ delete_temp_tlbs: - delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 - delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 0, CFG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CFG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 -#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ +#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CFG_SYS_CCSRBAR_PHYS) */ #if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) create_ccsr_l2_tlb: @@ -765,14 +765,14 @@ create_ccsr_l2_tlb: */ create_tlb0_entry 0, \ 0, BOOKE_PAGESZ_4K, \ - CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ - CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ - CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + CFG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CFG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CFG_SYS_CCSRBAR_PHYS_HIGH, r3 enable_l2_cluster_l2: /* enable L2 cache */ - lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h - ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + lis r3, (CFG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CFG_SYS_CCSRBAR + 0xC20000)@l li r4, 33 /* stash id */ stw r4, 4(r3) lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h @@ -813,7 +813,7 @@ enable_l2_cluster_l2: beq 1b delete_ccsr_l2_tlb: - delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 0, CFG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif /* @@ -863,7 +863,7 @@ delete_ccsr_l2_tlb: andi. r1,r3,L1CSR0_DCE@l beq 2b #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 -#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) +#define DCSR_LAWBARH0 (CFG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 #define DCSRBAR_LAWAR (LAW_EN | (0x1d << 20) | LAW_SIZE_1M) @@ -884,13 +884,13 @@ delete_ccsr_l2_tlb: rlwimi r0, r8, 16, MAS0_ESEL_MSK lis r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@h ori r1, r1, FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)@l - lis r7, CONFIG_SYS_CCSRBAR@h - ori r7, r7, CONFIG_SYS_CCSRBAR@l + lis r7, CFG_SYS_CCSRBAR@h + ori r7, r7, CFG_SYS_CCSRBAR@l ori r2, r7, MAS2_I|MAS2_G - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l - lis r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r4, r4, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + lis r3, FSL_BOOKE_MAS3(CFG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h + ori r3, r3, FSL_BOOKE_MAS3(CFG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l + lis r4, CFG_SYS_CCSRBAR_PHYS_HIGH@h + ori r4, r4, CFG_SYS_CCSRBAR_PHYS_HIGH@l mtspr MAS0, r0 mtspr MAS1, r1 mtspr MAS2, r2 @@ -1132,7 +1132,7 @@ create_init_ram_area: create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + CFG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 /* @@ -1148,7 +1148,7 @@ create_init_ram_area: create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ CONFIG_VAL(SYS_MONITOR_BASE) & 0xfff00000, MAS2_I|MAS2_G, \ - CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + CFG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #else @@ -1164,19 +1164,19 @@ create_init_ram_area: #endif /* create a temp mapping in AS=1 to the stack */ -#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ - defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) +#if defined(CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ + defined(CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH) create_tlb1_entry 14, \ 1, BOOKE_PAGESZ_16K, \ - CONFIG_SYS_INIT_RAM_ADDR, 0, \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + CFG_SYS_INIT_RAM_ADDR, 0, \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 #else create_tlb1_entry 14, \ 1, BOOKE_PAGESZ_16K, \ - CONFIG_SYS_INIT_RAM_ADDR, 0, \ - CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + CFG_SYS_INIT_RAM_ADDR, 0, \ + CFG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #endif @@ -1194,8 +1194,8 @@ switch_as: /* Allocate Initial RAM in data cache. */ - lis r3,CONFIG_SYS_INIT_RAM_ADDR@h - ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l + lis r3,CFG_SYS_INIT_RAM_ADDR@h + ori r3,r3,CFG_SYS_INIT_RAM_ADDR@l mfspr r2, L1CFG0 andi. r2, r2, 0x1ff /* cache size * 1024 / (2 * L1 line size) */ @@ -1230,11 +1230,11 @@ switch_as: .globl _start_cont _start_cont: /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/ - lis r3,(CONFIG_SYS_INIT_RAM_ADDR)@h - ori r3,r3,((CONFIG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ + lis r3,(CFG_SYS_INIT_RAM_ADDR)@h + ori r3,r3,((CFG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ #if CONFIG_VAL(SYS_MALLOC_F_LEN) -#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CONFIG_SYS_INIT_RAM_SIZE +#if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif @@ -1243,8 +1243,8 @@ _start_cont: #endif /* End of RAM */ - lis r4,(CONFIG_SYS_INIT_RAM_ADDR)@h - ori r4,r4,(CONFIG_SYS_INIT_RAM_SIZE)@l + lis r4,(CFG_SYS_INIT_RAM_ADDR)@h + ori r4,r4,(CFG_SYS_INIT_RAM_SIZE)@l li r0,0 @@ -1826,8 +1826,8 @@ trap_init: .globl unlock_ram_in_cache unlock_ram_in_cache: /* invalidate the INIT_RAM section */ - lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h - ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l + lis r3,(CFG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h + ori r3,r3,(CFG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l mfspr r4,L1CFG0 andi. r4,r4,0x1ff slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT) @@ -1844,8 +1844,8 @@ unlock_ram_in_cache: sync /* Invalidate the TLB entries for the cache */ - lis r3,CONFIG_SYS_INIT_RAM_ADDR@h - ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l + lis r3,CFG_SYS_INIT_RAM_ADDR@h + ori r3,r3,CFG_SYS_INIT_RAM_ADDR@l tlbivax 0,r3 addi r3,r3,0x1000 tlbivax 0,r3 diff --git a/arch/powerpc/cpu/mpc85xx/t1024_ids.c b/arch/powerpc/cpu/mpc85xx/t1024_ids.c index d2744bb9f8..bab076b2b1 100644 --- a/arch/powerpc/cpu/mpc85xx/t1024_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1024_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 27, 1, 0), SET_QP_INFO(2, 28, 1, 0), diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c index 99b52bacda..59f4f9c669 100644 --- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 27, 1, 0), SET_QP_INFO(2, 28, 1, 0), diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c index 17521dc3a4..390bb11537 100644 --- a/arch/powerpc/cpu/mpc85xx/t2080_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 27, 1, 0), SET_QP_INFO(2, 28, 1, 0), diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index 8fe4e96a11..37ea7788cc 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -8,7 +8,7 @@ #include <asm/fsl_liodn.h> #ifdef CONFIG_SYS_DPAA_QBMAN -struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { +struct qportal_info qp_info[CFG_SYS_QMAN_NUM_PORTALS] = { /* dqrr liodn, frame data liodn, liodn off, sdest */ SET_QP_INFO(1, 27, 1, 0), SET_QP_INFO(2, 28, 1, 0), diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 81e60722f9..5d21bef587 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -302,7 +302,7 @@ uint64_t tlb_map_range(ulong v_addr, phys_addr_t p_addr, uint64_t size, unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { - unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; + unsigned int ram_tlb_address = (unsigned int)CFG_SYS_DDR_SDRAM_BASE; u64 memsize = (u64)memsize_in_meg << 20; u64 size; @@ -324,13 +324,13 @@ unsigned int setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg) { return - setup_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg); + setup_ddr_tlbs_phys(CFG_SYS_DDR_SDRAM_BASE, memsize_in_meg); } /* Invalidate the DDR TLBs for the requested size */ void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { - u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE; + u32 vstart = CFG_SYS_DDR_SDRAM_BASE; unsigned long epn; u32 tsize, valid, ptr; phys_addr_t rpn = 0; @@ -351,7 +351,7 @@ void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) void clear_ddr_tlbs(unsigned int memsize_in_meg) { - clear_ddr_tlbs_phys(CONFIG_SYS_DDR_SDRAM_BASE, memsize_in_meg); + clear_ddr_tlbs_phys(CFG_SYS_DDR_SDRAM_BASE, memsize_in_meg); } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index f28826c5d1..d918b4395b 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -64,7 +64,7 @@ SECTIONS _end = .; #if CONFIG_IS_ENABLED(SYS_MPC85XX_NO_RESETVEC) -#if defined(CONFIG_SDCARD) && !defined(CONFIG_SYS_MMC_U_BOOT_OFFS) +#if defined(CONFIG_SDCARD) && !defined(CFG_SYS_MMC_U_BOOT_OFFS) mmc_u_boot_offs = .; #endif #endif @@ -101,7 +101,7 @@ SECTIONS .resetvec IMAGE_TEXT_BASE + RESET_VECTOR_OFFSET : { KEEP(*(.resetvec)) } = 0xffff -#if defined(CONFIG_SDCARD) && !defined(CONFIG_SYS_MMC_U_BOOT_OFFS) +#if defined(CONFIG_SDCARD) && !defined(CFG_SYS_MMC_U_BOOT_OFFS) mmc_u_boot_offs = .; #endif #endif diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index 0ebb7b33a8..1f1107e61d 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -141,8 +141,8 @@ in_flash: mtspr DER, r2 /* set up the stack on top of internal DPRAM */ - lis r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)@h - ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)@l + lis r3, (CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE)@h + ori r3, r3, (CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE)@l stw r0, -4(r3) stw r0, -8(r3) addi r1, r3, -8 diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c index 1101b9138f..1c051d1898 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_pamu.c @@ -230,7 +230,7 @@ static int pamu_config_spaace(uint32_t liodn, int pamu_init(void) { - u32 base_addr = CONFIG_SYS_PAMU_ADDR; + u32 base_addr = CFG_SYS_PAMU_ADDR; struct ccsr_pamu *regs; u32 i = 0; u64 ppaact_phys, ppaact_lim, ppaact_size; @@ -292,7 +292,7 @@ int pamu_init(void) void pamu_enable(void) { u32 i = 0; - u32 base_addr = CONFIG_SYS_PAMU_ADDR; + u32 base_addr = CFG_SYS_PAMU_ADDR; for (i = 0; i < CONFIG_NUM_PAMU; i++) { setbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE); @@ -304,7 +304,7 @@ void pamu_enable(void) void pamu_reset(void) { u32 i = 0; - u32 base_addr = CONFIG_SYS_PAMU_ADDR; + u32 base_addr = CFG_SYS_PAMU_ADDR; struct ccsr_pamu *regs; for (i = 0; i < CONFIG_NUM_PAMU; i++) { @@ -328,7 +328,7 @@ void pamu_reset(void) void pamu_disable(void) { u32 i = 0; - u32 base_addr = CONFIG_SYS_PAMU_ADDR; + u32 base_addr = CFG_SYS_PAMU_ADDR; for (i = 0; i < CONFIG_NUM_PAMU; i++) { diff --git a/arch/powerpc/cpu/mpc8xxx/pamu_table.c b/arch/powerpc/cpu/mpc8xxx/pamu_table.c index 71496ab294..caad6670cc 100644 --- a/arch/powerpc/cpu/mpc8xxx/pamu_table.c +++ b/arch/powerpc/cpu/mpc8xxx/pamu_table.c @@ -21,17 +21,17 @@ void construct_pamu_addr_table(struct pamu_addr_tbl *tbl, int *num_entries) tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1; i++; -#ifdef CONFIG_SYS_FLASH_BASE_PHYS +#ifdef CFG_SYS_FLASH_BASE_PHYS tbl->start_addr[i] = - (uint64_t)virt_to_phys((void *)CONFIG_SYS_FLASH_BASE_PHYS); + (uint64_t)virt_to_phys((void *)CFG_SYS_FLASH_BASE_PHYS); tbl->size[i] = 256 * 1024 * 1024; /* 256MB flash */ tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1; i++; #endif -#if (defined(CONFIG_SPL_BUILD) && (CONFIG_SYS_INIT_L3_VADDR)) +#if (defined(CONFIG_SPL_BUILD) && (CFG_SYS_INIT_L3_VADDR)) tbl->start_addr[i] = - (uint64_t)virt_to_phys((void *)CONFIG_SYS_INIT_L3_VADDR); + (uint64_t)virt_to_phys((void *)CFG_SYS_INIT_L3_VADDR); tbl->size[i] = 256 * 1024; /* 256K CPC flash */ tbl->end_addr[i] = tbl->start_addr[i] + tbl->size[i] - 1; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 2edf0d6f83..d9e5a7d621 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -43,9 +43,9 @@ #elif defined(CONFIG_ARCH_P1023) #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 2 -#define CONFIG_SYS_QMAN_NUM_PORTALS 3 -#define CONFIG_SYS_BMAN_NUM_PORTALS 3 -#define CONFIG_SYS_FM_MURAM_SIZE 0x10000 +#define CFG_SYS_QMAN_NUM_PORTALS 3 +#define CFG_SYS_BMAN_NUM_PORTALS 3 +#define CFG_SYS_FM_MURAM_SIZE 0x10000 /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_ARCH_P1024) @@ -68,7 +68,7 @@ #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 5 #define CFG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CFG_SYS_FM_MURAM_SIZE 0x28000 #define CFG_SYS_FSL_SRIO_MAX_PORTS 2 #define CFG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -78,7 +78,7 @@ #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 5 #define CFG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CFG_SYS_FM_MURAM_SIZE 0x28000 #define CFG_SYS_FSL_SRIO_MAX_PORTS 2 #define CFG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -90,7 +90,7 @@ #define CFG_SYS_NUM_FM2_DTSEC 4 #define CFG_SYS_NUM_FM1_10GEC 1 #define CFG_SYS_NUM_FM2_10GEC 1 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CFG_SYS_FM_MURAM_SIZE 0x28000 #define CFG_SYS_FSL_SRIO_MAX_PORTS 2 #define CFG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -103,7 +103,7 @@ #define CFG_SYS_NUM_FM1_10GEC 1 #define CFG_SYS_NUM_FM2_DTSEC 5 #define CFG_SYS_NUM_FM2_10GEC 1 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CFG_SYS_FM_MURAM_SIZE 0x28000 #define CFG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #elif defined(CONFIG_ARCH_BSC9131) @@ -134,11 +134,11 @@ #define CFG_SYS_FSL_SRDS_3 #define CFG_SYS_FSL_SRDS_4 #define CFG_SYS_NUM_FMAN 2 -#define CONFIG_SYS_PME_CLK 0 +#define CFG_SYS_PME_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_SYS_FM1_CLK 3 -#define CONFIG_SYS_FM2_CLK 3 -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CFG_SYS_FM1_CLK 3 +#define CFG_SYS_FM2_CLK 3 +#define CFG_SYS_FM_MURAM_SIZE 0x60000 #define CFG_SYS_FSL_SRIO_MAX_PORTS 2 #define CFG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -147,9 +147,9 @@ #define CONFIG_SYS_FSL_SRDS_1 #define CONFIG_SYS_FSL_SRDS_2 #define CFG_SYS_NUM_FMAN 1 -#define CONFIG_SYS_FM1_CLK 0 +#define CFG_SYS_FM1_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CFG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_ARCH_B4860 #define CONFIG_MAX_DSP_CPUS 12 @@ -173,11 +173,11 @@ #define CFG_SYS_NUM_FMAN 1 #define CFG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_PME_PLAT_CLK_DIV 2 -#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV +#define CFG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_FM_PLAT_CLK_DIV 1 -#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV -#define CONFIG_SYS_FM_MURAM_SIZE 0x30000 +#define CFG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV +#define CFG_SYS_FM_MURAM_SIZE 0x30000 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 @@ -191,9 +191,9 @@ #define CFG_SYS_NUM_FM1_10GEC 1 #define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_SYS_FM1_CLK 0 +#define CFG_SYS_FM1_CLK 0 #define CONFIG_QBMAN_CLK_DIV 1 -#define CONFIG_SYS_FM_MURAM_SIZE 0x30000 +#define CFG_SYS_FM_MURAM_SIZE 0x30000 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 @@ -212,10 +212,10 @@ #define CFG_SYS_FSL_SRIO_IB_WIN_NUM 5 #endif #define CONFIG_PME_PLAT_CLK_DIV 1 -#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV -#define CONFIG_SYS_FM1_CLK 0 +#define CFG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV +#define CFG_SYS_FM1_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 -#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CFG_SYS_FM_MURAM_SIZE 0x28000 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 5038cb9f59..a03f091c30 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -469,7 +469,7 @@ extern void print_lbc_regs(void); extern void init_early_memctl_regs(void); extern void upmconfig(uint upm, uint *table, uint size); -#define LBC_BASE_ADDR ((fsl_lbc_t *)CONFIG_SYS_LBC_ADDR) +#define LBC_BASE_ADDR ((fsl_lbc_t *)CFG_SYS_LBC_ADDR) #define get_lbc_lcrr() (in_be32(&(LBC_BASE_ADDR)->lcrr)) #define get_lbc_lbcr() (in_be32(&(LBC_BASE_ADDR)->lbcr)) #define get_lbc_br(i) (in_be32(&(LBC_BASE_ADDR)->bank[i].br)) diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index de85bcfdcf..0af3d8902a 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -18,15 +18,15 @@ struct srio_liodn_id_table { #define SET_SRIO_LIODN_1(port, idA) \ { .id = { idA }, .num_ids = 1, .portid = port, \ .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \ - + CFG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ + + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \ } #define SET_SRIO_LIODN_2(port, idA, idB) \ { .id = { idA, idB }, .num_ids = 2, .portid = port, \ .reg_offset[0] = offsetof(ccsr_gur_t, rio##port##liodnr) \ - + CFG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ + + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \ .reg_offset[1] = offsetof(ccsr_gur_t, rio##port##maintliodnr) \ - + CFG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ + + CFG_SYS_MPC85xx_GUTS_OFFSET + CFG_SYS_CCSRBAR, \ } #define SET_SRIO_LIODN_BASE(port, id_a) \ @@ -70,22 +70,22 @@ extern void fdt_fixup_liodn(void *blob); { .compat[0] = name1, \ .compat[1] = name2, \ .id = { idA }, .num_ids = 1, \ - .reg_offset = off + CONFIG_SYS_CCSRBAR, \ - .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + .reg_offset = off + CFG_SYS_CCSRBAR, \ + .compat_offset = compatoff + CFG_SYS_CCSRBAR_PHYS, \ } #define SET_LIODN_ENTRY_1(name, idA, off, compatoff) \ { .compat = name, \ .id = { idA }, .num_ids = 1, \ - .reg_offset = off + CONFIG_SYS_CCSRBAR, \ - .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + .reg_offset = off + CFG_SYS_CCSRBAR, \ + .compat_offset = compatoff + CFG_SYS_CCSRBAR_PHYS, \ } #define SET_LIODN_ENTRY_2(name, idA, idB, off, compatoff) \ { .compat = name, \ .id = { idA, idB }, .num_ids = 2, \ - .reg_offset = off + CONFIG_SYS_CCSRBAR, \ - .compat_offset = compatoff + CONFIG_SYS_CCSRBAR_PHYS, \ + .reg_offset = off + CFG_SYS_CCSRBAR, \ + .compat_offset = compatoff + CFG_SYS_CCSRBAR_PHYS, \ } #define SET_GUTS_LIODN(compat, liodn, name, compatoff) \ diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 3e707600f2..e8b2680206 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -9,11 +9,11 @@ #ifdef CONFIG_NXP_ESBC #if defined(CONFIG_FSL_CORENET) -#define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000 +#define CFG_SYS_PBI_FLASH_BASE 0xc0000000 #else -#define CONFIG_SYS_PBI_FLASH_BASE 0xce000000 +#define CFG_SYS_PBI_FLASH_BASE 0xce000000 #endif -#define CONFIG_SYS_PBI_FLASH_WINDOW 0xcff80000 +#define CFG_SYS_PBI_FLASH_WINDOW 0xcff80000 #if defined(CONFIG_TARGET_T2080QDS) || \ defined(CONFIG_TARGET_T2080RDB) || \ @@ -21,18 +21,18 @@ defined(CONFIG_TARGET_T1042D4RDB) || \ defined(CONFIG_TARGET_T1042RDB_PI) || \ defined(CONFIG_ARCH_T1024) -#undef CONFIG_SYS_INIT_L3_ADDR -#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 +#undef CFG_SYS_INIT_L3_ADDR +#define CFG_SYS_INIT_L3_ADDR 0xbff00000 #endif #if defined(CONFIG_RAMBOOT_PBL) -#undef CONFIG_SYS_INIT_L3_ADDR -#ifdef CONFIG_SYS_INIT_L3_VADDR -#define CONFIG_SYS_INIT_L3_ADDR \ - (CONFIG_SYS_INIT_L3_VADDR & ~0xFFF00000) | \ +#undef CFG_SYS_INIT_L3_ADDR +#ifdef CFG_SYS_INIT_L3_VADDR +#define CFG_SYS_INIT_L3_ADDR \ + (CFG_SYS_INIT_L3_VADDR & ~0xFFF00000) | \ 0xbff00000 #else -#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 +#define CFG_SYS_INIT_L3_ADDR 0xbff00000 #endif #endif diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 8e18202670..19774f3053 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -871,11 +871,11 @@ struct ccsr_gpio { #define CFG_SYS_MPC83xx_ESDHC_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC83xx_ESDHC_OFFSET) -#define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) +#define CFG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 -#define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CFG_SYS_TSEC1_OFFSET 0x24000 +#define CFG_SYS_MDIO1_OFFSET 0x24000 -#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) -#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_MDIO1_OFFSET) #endif /* __IMMAP_83xx__ */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 9ae698743e..283fdf3b45 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2445,10 +2445,10 @@ struct ccsr_pman { #ifdef CONFIG_SYS_FSL_SFP_VER_3_0 /* In SFPv3, OSPR register is now at offset 0x200. * * So directly mapping sfp register map to this address */ -#define CONFIG_SYS_OSPR_OFFSET 0x200 -#define CONFIG_SYS_SFP_OFFSET (0xE8000 + CONFIG_SYS_OSPR_OFFSET) +#define CFG_SYS_OSPR_OFFSET 0x200 +#define CFG_SYS_SFP_OFFSET (0xE8000 + CFG_SYS_OSPR_OFFSET) #else -#define CONFIG_SYS_SFP_OFFSET 0xE8000 +#define CFG_SYS_SFP_OFFSET 0xE8000 #endif #define CFG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 #define CFG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 @@ -2489,7 +2489,7 @@ struct ccsr_pman { #define CFG_SYS_MPC85xx_SATA2_OFFSET 0x221000 #define CFG_SYS_FSL_SEC_OFFSET 0x300000 #define CFG_SYS_FSL_JR0_OFFSET 0x301000 -#define CONFIG_SYS_SEC_MON_OFFSET 0x314000 +#define CFG_SYS_SEC_MON_OFFSET 0x314000 #define CFG_SYS_FSL_CORENET_PME_OFFSET 0x316000 #define CFG_SYS_FSL_QMAN_OFFSET 0x318000 #define CFG_SYS_FSL_BMAN_OFFSET 0x31a000 @@ -2542,13 +2542,13 @@ struct ccsr_pman { #define CFG_SYS_MPC85xx_USB1_PHY_OFFSET 0xE5000 #define CFG_SYS_MPC85xx_USB2_PHY_OFFSET 0xE5100 #ifdef CONFIG_TSECV2 -#define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#define CFG_SYS_TSEC1_OFFSET 0xB0000 #elif defined(CONFIG_TSECV2_1) -#define CONFIG_SYS_TSEC1_OFFSET 0x10000 +#define CFG_SYS_TSEC1_OFFSET 0x10000 #else -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CFG_SYS_TSEC1_OFFSET 0x24000 #endif -#define CONFIG_SYS_MDIO1_OFFSET 0x24000 +#define CFG_SYS_MDIO1_OFFSET 0x24000 #define CFG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 #if defined(CONFIG_ARCH_C29X) #define CFG_SYS_FSL_SEC_OFFSET 0x80000 @@ -2559,8 +2559,8 @@ struct ccsr_pman { #endif #define CFG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CFG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 -#define CONFIG_SYS_SEC_MON_OFFSET 0xE6000 -#define CONFIG_SYS_SFP_OFFSET 0xE7000 +#define CFG_SYS_SEC_MON_OFFSET 0xE6000 +#define CFG_SYS_SFP_OFFSET 0xE7000 #define CFG_SYS_FSL_QMAN_OFFSET 0x88000 #define CFG_SYS_FSL_BMAN_OFFSET 0x8a000 #define CFG_SYS_FSL_FM1_OFFSET 0x100000 @@ -2574,9 +2574,9 @@ struct ccsr_pman { #define CFG_SYS_FSL_SRIO_OFFSET 0xC0000 #define CFG_SYS_FSL_CPC_ADDR \ - (CONFIG_SYS_CCSRBAR + CFG_SYS_FSL_CPC_OFFSET) + (CFG_SYS_CCSRBAR + CFG_SYS_FSL_CPC_OFFSET) #define CFG_SYS_FSL_SCFG_ADDR \ - (CONFIG_SYS_CCSRBAR + CFG_SYS_FSL_SCFG_OFFSET) + (CFG_SYS_CCSRBAR + CFG_SYS_FSL_SCFG_OFFSET) #define CFG_SYS_FSL_QMAN_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_FSL_QMAN_OFFSET) #define CFG_SYS_FSL_BMAN_ADDR \ @@ -2603,9 +2603,9 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CFG_SYS_MPC8xxx_DDR2_OFFSET) #define CFG_SYS_FSL_DDR3_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC8xxx_DDR3_OFFSET) -#define CONFIG_SYS_LBC_ADDR \ +#define CFG_SYS_LBC_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_LBC_OFFSET) -#define CONFIG_SYS_IFC_ADDR \ +#define CFG_SYS_IFC_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_IFC_OFFSET) #define CFG_SYS_MPC85xx_ESPI_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_ESPI_OFFSET) @@ -2659,7 +2659,7 @@ struct ccsr_pman { (CONFIG_SYS_IMMR + CFG_SYS_FSL_FM2_OFFSET) #define CFG_SYS_FSL_SRIO_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_FSL_SRIO_OFFSET) -#define CONFIG_SYS_PAMU_ADDR \ +#define CFG_SYS_PAMU_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_FSL_PAMU_OFFSET) #define CFG_SYS_PCIE1_ADDR \ @@ -2667,14 +2667,14 @@ struct ccsr_pman { #define CFG_SYS_PCIE2_ADDR \ (CONFIG_SYS_IMMR + CFG_SYS_MPC85xx_PCIE2_OFFSET) -#define CONFIG_SYS_SFP_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_SFP_OFFSET) +#define CFG_SYS_SFP_ADDR \ + (CONFIG_SYS_IMMR + CFG_SYS_SFP_OFFSET) -#define CONFIG_SYS_SEC_MON_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_SEC_MON_OFFSET) +#define CFG_SYS_SEC_MON_ADDR \ + (CONFIG_SYS_IMMR + CFG_SYS_SEC_MON_OFFSET) -#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) -#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_TSEC1_OFFSET) +#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CFG_SYS_MDIO1_OFFSET) #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 struct ccsr_cluster_l2 { @@ -2735,7 +2735,7 @@ struct ccsr_cluster_l2 { (CONFIG_SYS_IMMR + CFG_SYS_FSL_CLUSTER_1_L2_OFFSET) #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ -#define CONFIG_SYS_DCSR_DCFG_OFFSET 0X20000 +#define CFG_SYS_DCSR_DCFG_OFFSET 0X20000 struct dcsr_dcfg_regs { u8 res_0[0x520]; u32 ecccr1; diff --git a/arch/powerpc/lib/spl.c b/arch/powerpc/lib/spl.c index d4a6057527..b638ea7be6 100644 --- a/arch/powerpc/lib/spl.c +++ b/arch/powerpc/lib/spl.c @@ -23,7 +23,7 @@ void __noreturn jump_to_image_linux(struct spl_image_info *spl_image) image_entry_arg_t image_entry = (image_entry_arg_t)spl_image->entry_point; - image_entry(spl_image->arg, 0, 0, EPAPR_MAGIC, CONFIG_SYS_BOOTMAPSZ, + image_entry(spl_image->arg, 0, 0, EPAPR_MAGIC, CFG_SYS_BOOTMAPSZ, 0, 0); } #endif /* CONFIG_SPL_OS_BOOT */ diff --git a/arch/sh/include/asm/config.h b/arch/sh/include/asm/config.h index 99d8797a54..03c196fec3 100644 --- a/arch/sh/include/asm/config.h +++ b/arch/sh/include/asm/config.h @@ -9,7 +9,7 @@ #include <asm/processor.h> /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 4) +#define CFG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ +#define CFG_SYS_TIMER_RATE (get_board_sys_clk() / 4) #endif diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index c11101b44e..1eb97ac5bb 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -144,7 +144,7 @@ static void x86_phys_memset_page(phys_addr_t map_addr, uintptr_t offset, int c, /* Make sure the window is below U-Boot. */ assert(window + LARGE_PAGE_SIZE < - gd->relocaddr - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_STACK_SIZE); + gd->relocaddr - CONFIG_SYS_MALLOC_LEN - CFG_SYS_STACK_SIZE); /* Map the page into the window and then memset the appropriate part. */ x86_phys_map_page(window, map_addr, 1); memset((void *)(window + offset), c, size); diff --git a/arch/xtensa/include/asm/addrspace.h b/arch/xtensa/include/asm/addrspace.h index 3b27f9308a..920b5fd26b 100644 --- a/arch/xtensa/include/asm/addrspace.h +++ b/arch/xtensa/include/asm/addrspace.h @@ -22,8 +22,8 @@ * The actual location of memory and IO is the board property. */ -#define IOADDR(x) (CONFIG_SYS_IO_BASE + (x)) -#define MEMADDR(x) (CONFIG_SYS_MEMORY_BASE + (x)) +#define IOADDR(x) (CFG_SYS_IO_BASE + (x)) +#define MEMADDR(x) (CFG_SYS_MEMORY_BASE + (x)) #define PHYSADDR(x) ((x) - XCHAL_VECBASE_RESET_VADDR + \ XCHAL_VECBASE_RESET_PADDR) diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c index f9a37e7215..ea49c7a99c 100644 --- a/board/BuS/eb_cpu5282/eb_cpu5282.c +++ b/board/BuS/eb_cpu5282/eb_cpu5282.c @@ -26,7 +26,7 @@ DECLARE_GLOBAL_DATA_PTR; int checkboard (void) { puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n"); -#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) +#if (CONFIG_TEXT_BASE == CFG_SYS_INT_FLASH_BASE) puts(" Boot from Internal FLASH\n"); #endif return 0; @@ -38,7 +38,7 @@ int dram_init(void) size = 0; MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 | - MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4); + MCFSDRAMC_DCR_RC((15 * CFG_SYS_CLK / 1000000) >> 4); asm (" nop"); #ifdef CFG_SYS_SDRAM_BASE0 MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CFG_SYS_SDRAM_BASE0)| @@ -94,7 +94,7 @@ int dram_init(void) return 0; } -#if defined(CONFIG_SYS_DRAM_TEST) +#if defined(CFG_SYS_DRAM_TEST) int testdram(void) { uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c index 695d6f6ed4..9170913400 100644 --- a/board/LaCie/net2big_v2/net2big_v2.c +++ b/board/LaCie/net2big_v2/net2big_v2.c @@ -88,7 +88,7 @@ int board_init(void) #if defined(CONFIG_MISC_INIT_R) -#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_G762_ADDR) +#if defined(CONFIG_CMD_I2C) && defined(CFG_SYS_I2C_G762_ADDR) /* * Start I2C fan (GMT G762 controller) */ @@ -100,11 +100,11 @@ static void init_fan(void) /* Enable open-loop and PWM modes */ data = 0x20; - if (i2c_write(CONFIG_SYS_I2C_G762_ADDR, + if (i2c_write(CFG_SYS_I2C_G762_ADDR, G762_REG_FAN_CMD1, 1, &data, 1) != 0) goto err; data = 0; - if (i2c_write(CONFIG_SYS_I2C_G762_ADDR, + if (i2c_write(CFG_SYS_I2C_G762_ADDR, G762_REG_SET_CNT, 1, &data, 1) != 0) goto err; /* @@ -124,18 +124,18 @@ static void init_fan(void) * Start fan at low speed (2800 RPM): */ data = 0x08; - if (i2c_write(CONFIG_SYS_I2C_G762_ADDR, + if (i2c_write(CFG_SYS_I2C_G762_ADDR, G762_REG_SET_OUT, 1, &data, 1) != 0) goto err; return; err: printf("Error: failed to start I2C fan @%02x\n", - CONFIG_SYS_I2C_G762_ADDR); + CFG_SYS_I2C_G762_ADDR); } #else static void init_fan(void) {} -#endif /* CONFIG_CMD_I2C && CONFIG_SYS_I2C_G762_ADDR */ +#endif /* CONFIG_CMD_I2C && CFG_SYS_I2C_G762_ADDR */ #if defined(CONFIG_NET2BIG_V2) && defined(CONFIG_KIRKWOOD_GPIO) /* diff --git a/board/Synology/common/legacy.c b/board/Synology/common/legacy.c index 06f964f53a..a0bace7b46 100644 --- a/board/Synology/common/legacy.c +++ b/board/Synology/common/legacy.c @@ -56,8 +56,8 @@ void setup_board_tags(struct tag **in_params) t = (struct tag_mv_uboot *)¶ms->u; t->uboot_version = VER_NUM | syno_board_id(); - t->tclk = CONFIG_SYS_TCLK; - t->sysclk = CONFIG_SYS_TCLK * 2; + t->tclk = CFG_SYS_TCLK; + t->sysclk = CFG_SYS_TCLK * 2; t->isusbhost = usb_port_modes(); for (i = 0; i < ETHADDR_MAX; i++) { diff --git a/board/armltd/integrator/timer.c b/board/armltd/integrator/timer.c index d220b877d6..9db5135a8f 100644 --- a/board/armltd/integrator/timer.c +++ b/board/armltd/integrator/timer.c @@ -41,10 +41,10 @@ static unsigned long long div_clock = DIV_CLOCK_INIT; static unsigned long long div_timer = 1; /* Divisor to convert timer reading * change to U-Boot ticks */ -/* CONFIG_SYS_HZ = CONFIG_SYS_HZ_CLOCK/(div_clock * div_timer) */ +/* CONFIG_SYS_HZ = CFG_SYS_HZ_CLOCK/(div_clock * div_timer) */ static ulong timestamp; /* U-Boot ticks since startup */ -#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) +#define READ_TIMER (*(volatile ulong *)(CFG_SYS_TIMERBASE+4)) /* all function return values in U-Boot ticks i.e. (1/CONFIG_SYS_HZ) sec * - unless otherwise stated @@ -55,7 +55,7 @@ static ulong timestamp; /* U-Boot ticks since startup */ int timer_init (void) { /* Load timer with initial value */ - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL; + *(volatile ulong *)(CFG_SYS_TIMERBASE + 0) = TIMER_LOAD_VAL; #ifdef CONFIG_ARCH_CINTEGRATOR /* Set timer to be * enabled 1 @@ -66,7 +66,7 @@ int timer_init (void) * 32 bit 1 * wrapping 0 */ - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x000000C2; + *(volatile ulong *)(CFG_SYS_TIMERBASE + 8) = 0x000000C2; #else /* Set timer to be * enabled 1 @@ -75,7 +75,7 @@ int timer_init (void) * divider 256 10 * XX 00 */ - *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = 0x00000088; + *(volatile ulong *)(CFG_SYS_TIMERBASE + 8) = 0x00000088; #endif /* init the timestamp */ @@ -85,7 +85,7 @@ int timer_init (void) /* start "advancing" time stamp from 0 */ timestamp = 0L; - div_timer = CONFIG_SYS_HZ_CLOCK; + div_timer = CFG_SYS_HZ_CLOCK; do_div(div_timer, CONFIG_SYS_HZ); do_div(div_timer, div_clock); @@ -156,7 +156,7 @@ unsigned long long get_ticks(void) */ ulong get_tbclk(void) { - unsigned long long tmp = CONFIG_SYS_HZ_CLOCK; + unsigned long long tmp = CFG_SYS_HZ_CLOCK; do_div(tmp, div_clock); diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index af326dc6f4..4ca544f101 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -108,7 +108,7 @@ unsigned long __section(".data") prior_stage_fdt_address[2]; #define JUNO_FLASH_SEC_SIZE (256 * 1024) static phys_addr_t find_dtb_in_nor_flash(const char *partname) { - phys_addr_t sector = CONFIG_SYS_FLASH_BASE; + phys_addr_t sector = CFG_SYS_FLASH_BASE; int i; for (i = 0; @@ -140,7 +140,7 @@ static phys_addr_t find_dtb_in_nor_flash(const char *partname) imginfo = sector + JUNO_FLASH_SEC_SIZE - 0x30 - reg; reg = readl(imginfo + 0x54); - return CONFIG_SYS_FLASH_BASE + + return CFG_SYS_FLASH_BASE + reg * JUNO_FLASH_SEC_SIZE; } } diff --git a/board/cadence/xtfpga/xtfpga.c b/board/cadence/xtfpga/xtfpga.c index ade7f9d120..f38f5564a0 100644 --- a/board/cadence/xtfpga/xtfpga.c +++ b/board/cadence/xtfpga/xtfpga.c @@ -58,8 +58,8 @@ unsigned long get_board_sys_clk(void) * else non-zero (hang). */ -#ifdef CONFIG_SYS_FPGAREG_FREQ - return (*(volatile unsigned long *)CONFIG_SYS_FPGAREG_FREQ); +#ifdef CFG_SYS_FPGAREG_FREQ + return (*(volatile unsigned long *)CFG_SYS_FPGAREG_FREQ); #else /* early Tensilica bitstreams lack this reg, but most run at 50 MHz */ return 50000000; @@ -90,7 +90,7 @@ int misc_init_r(void) if (s == 0) { unsigned int x; char s[] = __stringify(CONFIG_ETHBASE); - x = (*(volatile u32 *)CONFIG_SYS_FPGAREG_DIPSW) + x = (*(volatile u32 *)CFG_SYS_FPGAREG_DIPSW) & FPGAREG_MAC_MASK; sprintf(&s[15], "%02x", x); env_set("ethaddr", s); @@ -106,9 +106,9 @@ U_BOOT_DRVINFO(sysreset) = { static struct ethoc_eth_pdata ethoc_pdata = { .eth_pdata = { - .iobase = CONFIG_SYS_ETHOC_BASE, + .iobase = CFG_SYS_ETHOC_BASE, }, - .packet_base = CONFIG_SYS_ETHOC_BUFFER_ADDR, + .packet_base = CFG_SYS_ETHOC_BUFFER_ADDR, }; U_BOOT_DRVINFO(ethoc) = { diff --git a/board/cavium/thunderx/atf.c b/board/cavium/thunderx/atf.c index 1a039c53c1..37340fe970 100644 --- a/board/cavium/thunderx/atf.c +++ b/board/cavium/thunderx/atf.c @@ -187,7 +187,7 @@ static void atf_print_part_table(void) int ret; char *ptype; - struct storage_partition *part = (void *)CONFIG_SYS_LOWMEM_BASE; + struct storage_partition *part = (void *)CFG_SYS_LOWMEM_BASE; pcount = atf_get_pcount(); diff --git a/board/cavium/thunderx/thunderx.c b/board/cavium/thunderx/thunderx.c index a8f8c78558..ab20825ed3 100644 --- a/board/cavium/thunderx/thunderx.c +++ b/board/cavium/thunderx/thunderx.c @@ -20,7 +20,7 @@ #include <dm/platform_data/serial_pl01x.h> static const struct pl01x_serial_plat serial0 = { - .base = CONFIG_SYS_SERIAL0, + .base = CFG_SYS_SERIAL0, .type = TYPE_PL011, .clock = 0, .skip_init = true, @@ -32,7 +32,7 @@ U_BOOT_DRVINFO(thunderx_serial0) = { }; static const struct pl01x_serial_plat serial1 = { - .base = CONFIG_SYS_SERIAL1, + .base = CFG_SYS_SERIAL1, .type = TYPE_PL011, .clock = 0, .skip_init = true, diff --git a/board/cobra5272/flash.c b/board/cobra5272/flash.c index 5d15ed4e69..8416af163a 100644 --- a/board/cobra5272/flash.c +++ b/board/cobra5272/flash.c @@ -12,7 +12,7 @@ #include <uuid.h> #include <linux/delay.h> -#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE +#define PHYS_FLASH_1 CFG_SYS_FLASH_BASE #define FLASH_BANK_SIZE 0x200000 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; @@ -102,8 +102,8 @@ unsigned long flash_init(void) } flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]); + CFG_SYS_FLASH_BASE, + CFG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]); return size; } @@ -117,8 +117,8 @@ unsigned long flash_init(void) #define CMD_PROGRAM 0x00A0 #define CMD_UNLOCK_BYPASS 0x0020 -#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1))) -#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1))) +#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_SYS_FLASH_BASE + (0x00000555<<1))) +#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_SYS_FLASH_BASE + (0x000002AA<<1))) #define BIT_ERASE_DONE 0x0080 #define BIT_RDY_MASK 0x0080 diff --git a/board/cortina/presidio-asic/lowlevel_init.S b/board/cortina/presidio-asic/lowlevel_init.S index cbf8134346..8d8842ebed 100644 --- a/board/cortina/presidio-asic/lowlevel_init.S +++ b/board/cortina/presidio-asic/lowlevel_init.S @@ -27,7 +27,7 @@ skip_smp_setup: #if defined(CONFIG_SOC_CA8277B) /* Enable CPU Timer */ - ldr x0, =CONFIG_SYS_TIMER_BASE + ldr x0, =CFG_SYS_TIMER_BASE mov x1, #1 str w1, [x0] #endif diff --git a/board/cortina/presidio-asic/presidio.c b/board/cortina/presidio-asic/presidio.c index f344622b02..aae0a5dac0 100644 --- a/board/cortina/presidio-asic/presidio.c +++ b/board/cortina/presidio-asic/presidio.c @@ -84,7 +84,7 @@ int board_init(void) unsigned int reg_data, jtag_id; /* Enable timer */ - writel(1, CONFIG_SYS_TIMER_BASE); + writel(1, CFG_SYS_TIMER_BASE); /* Enable snoop in CCI400 slave port#4 */ writel(3, 0xF5595000); diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index 2436aab71c..e3a0f266a4 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -371,20 +371,20 @@ int rmii_hw_init(void) /* Set polarity to non-inverted */ buf[0] = 0x0; buf[1] = 0x0; - ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 4, 1, buf, 2); + ret = i2c_write(CFG_SYS_I2C_EXPANDER_ADDR, 4, 1, buf, 2); if (ret) { printf("\nExpander @ 0x%02x write FAILED!!!\n", - CONFIG_SYS_I2C_EXPANDER_ADDR); + CFG_SYS_I2C_EXPANDER_ADDR); return ret; } /* Configure P07-P05 as outputs */ buf[0] = 0x1f; buf[1] = 0xff; - ret = i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 6, 1, buf, 2); + ret = i2c_write(CFG_SYS_I2C_EXPANDER_ADDR, 6, 1, buf, 2); if (ret) { printf("\nExpander @ 0x%02x write FAILED!!!\n", - CONFIG_SYS_I2C_EXPANDER_ADDR); + CFG_SYS_I2C_EXPANDER_ADDR); } /* For Ethernet RMII selection @@ -392,16 +392,16 @@ int rmii_hw_init(void) * P06(SelB)=1 * P05(SelC)=1 */ - if (i2c_read(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { + if (i2c_read(CFG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { printf("\nExpander @ 0x%02x read FAILED!!!\n", - CONFIG_SYS_I2C_EXPANDER_ADDR); + CFG_SYS_I2C_EXPANDER_ADDR); } buf[0] &= 0x1f; buf[0] |= (0 << 7) | (1 << 6) | (1 << 5); - if (i2c_write(CONFIG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { + if (i2c_write(CFG_SYS_I2C_EXPANDER_ADDR, 2, 1, buf, 1)) { printf("\nExpander @ 0x%02x write FAILED!!!\n", - CONFIG_SYS_I2C_EXPANDER_ADDR); + CFG_SYS_I2C_EXPANDER_ADDR); } /* Set the output as high */ diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c index 913c2ea166..ceb0d2cf0a 100644 --- a/board/egnite/ethernut5/ethernut5.c +++ b/board/egnite/ethernut5/ethernut5.c @@ -193,6 +193,6 @@ int board_mmc_init(struct bd_info *bd) int board_mmc_getcd(struct mmc *mmc) { - return !at91_get_pio_value(CONFIG_SYS_MMC_CD_PIN); + return !at91_get_pio_value(CFG_SYS_MMC_CD_PIN); } #endif diff --git a/board/emulation/qemu-ppce500/qemu-ppce500.c b/board/emulation/qemu-ppce500/qemu-ppce500.c index a4254250bb..a39bcb4fa0 100644 --- a/board/emulation/qemu-ppce500/qemu-ppce500.c +++ b/board/emulation/qemu-ppce500/qemu-ppce500.c @@ -41,7 +41,7 @@ static void *get_fdt_virt(void) if (gd->flags & GD_FLG_RELOC) return (void *)gd->fdt_blob; else - return (void *)CONFIG_SYS_TMPVIRT; + return (void *)CFG_SYS_TMPVIRT; } static uint64_t get_fdt_phys(void) @@ -163,7 +163,7 @@ int misc_init_r(void) * U-Boot is relocated to RAM already, let's delete the temporary FDT * virtual-physical mapping that was used in the pre-relocation phase. */ - disable_tlb(find_tlb_idx((void *)CONFIG_SYS_TMPVIRT, 1)); + disable_tlb(find_tlb_idx((void *)CFG_SYS_TMPVIRT, 1)); /* * Detect the presence of the platform bus node, and @@ -248,7 +248,7 @@ void init_tlbs(void) init_used_tlb_cams(); /* Create a dynamic AS=0 CCSRBAR mapping */ - assert(!tlb_map_range(CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + assert(!tlb_map_range(CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, 1024 * 1024, TLB_MAP_IO)); /* Create a RAM map that spans all accessible RAM */ diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c index 2304e9e8ec..21f4ba98b5 100644 --- a/board/esd/meesc/meesc.c +++ b/board/esd/meesc/meesc.c @@ -240,7 +240,7 @@ int misc_init_r(void) if (str && (strcmp(str, "4") == 0)) { writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) | AT91SAM9_PMC_MDIV_4, &pmc->mckr); - at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); + at91_clock_init(CFG_SYS_AT91_MAIN_CLOCK); serial_setbrg(); /* Notify the user that the clock is not default */ printf("Setting master clock to %s MHz\n", diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c index d31ad02656..9ca350ed46 100644 --- a/board/freescale/common/fsl_chain_of_trust.c +++ b/board/freescale/common/fsl_chain_of_trust.c @@ -43,7 +43,7 @@ int fsl_check_boot_mode_secure(void) { uint32_t val; - struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_sfp_regs *sfp_regs = (void *)(CFG_SYS_SFP_ADDR); struct ccsr_gur __iomem *gur = (void *)(CONFIG_DCFG_ADDR); val = sfp_in32(&sfp_regs->ospr) & ITS_MASK; diff --git a/board/freescale/common/fsl_validate.c b/board/freescale/common/fsl_validate.c index 3424d49208..285ed9afcc 100644 --- a/board/freescale/common/fsl_validate.c +++ b/board/freescale/common/fsl_validate.c @@ -85,7 +85,7 @@ int get_csf_base_addr(u32 *csf_addr, u32 *flash_base_addr) { struct ccsr_gur __iomem *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); u32 csf_hdr_addr = in_be32(&gur->scratchrw[0]); - u32 csf_flash_offset = csf_hdr_addr & ~(CONFIG_SYS_PBI_FLASH_BASE); + u32 csf_flash_offset = csf_hdr_addr & ~(CFG_SYS_PBI_FLASH_BASE); u32 flash_addr, addr; int found = 0; int i = 0; @@ -160,7 +160,7 @@ static int get_ie_info_addr(uintptr_t *ie_addr) */ #if defined(CONFIG_FSL_TRUST_ARCH_v1) && defined(CONFIG_FSL_CORENET) sg_tbl = (struct fsl_secboot_sg_table *) - (((u32)hdr->psgtable & ~(CONFIG_SYS_PBI_FLASH_BASE)) + + (((u32)hdr->psgtable & ~(CFG_SYS_PBI_FLASH_BASE)) + flash_base_addr); #else sg_tbl = (struct fsl_secboot_sg_table *)(uintptr_t)(csf_addr + @@ -170,7 +170,7 @@ static int get_ie_info_addr(uintptr_t *ie_addr) /* IE Key Table is the first entry in the SG Table */ #if defined(CONFIG_MPC85xx) *ie_addr = (uintptr_t)((sg_tbl->src_addr & - ~(CONFIG_SYS_PBI_FLASH_BASE)) + + ~(CFG_SYS_PBI_FLASH_BASE)) + flash_base_addr); #else *ie_addr = (uintptr_t)sg_tbl->src_addr; @@ -203,7 +203,7 @@ static u32 check_srk(struct fsl_secboot_img_priv *img) /* This function returns ospr's key_revoc values.*/ static u32 get_key_revoc(void) { - struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_sfp_regs *sfp_regs = (void *)(CFG_SYS_SFP_ADDR); return (sfp_in32(&sfp_regs->ospr) & OSPR_KEY_REVOC_MASK) >> OSPR_KEY_REVOC_SHIFT; } @@ -342,7 +342,7 @@ static inline u32 get_key_len(struct fsl_secboot_img_priv *img) */ static void fsl_secboot_header_verification_failure(void) { - struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_sfp_regs *sfp_regs = (void *)(CFG_SYS_SFP_ADDR); /* 29th bit of OSPR is ITS */ u32 its = sfp_in32(&sfp_regs->ospr) >> 2; @@ -367,7 +367,7 @@ static void fsl_secboot_header_verification_failure(void) */ static void fsl_secboot_image_verification_failure(void) { - struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_sfp_regs *sfp_regs = (void *)(CFG_SYS_SFP_ADDR); u32 its = (sfp_in32(&sfp_regs->ospr) & ITS_MASK) >> ITS_BIT; @@ -871,7 +871,7 @@ static int secboot_init(struct fsl_secboot_img_priv **img_ptr) int fsl_secboot_validate(uintptr_t haddr, char *arg_hash_str, uintptr_t *img_addr_ptr) { - struct ccsr_sfp_regs *sfp_regs = (void *)(CONFIG_SYS_SFP_ADDR); + struct ccsr_sfp_regs *sfp_regs = (void *)(CFG_SYS_SFP_ADDR); ulong hash[SHA256_BYTES/sizeof(ulong)]; char hash_str[NUM_HEX_CHARS + 1]; struct fsl_secboot_img_priv *img; diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c index 8951fae32d..1a1e9343d2 100644 --- a/board/freescale/common/p_corenet/law.c +++ b/board/freescale/common/p_corenet/law.c @@ -11,12 +11,12 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN), #endif #ifdef PIXIS_BASE_PHYS SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), @@ -24,9 +24,9 @@ struct law_entry law_table[] = { #ifdef CPLD_BASE_PHYS SET_LAW(CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS +#ifdef CFG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c index 7302b76066..1a2d9cbfc0 100644 --- a/board/freescale/common/p_corenet/tlb.c +++ b/board/freescale/common/p_corenet/tlb.c @@ -11,20 +11,20 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), #ifdef CPLD_BASE @@ -41,25 +41,25 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) #if !defined(CONFIG_NXP_ESBC) /* * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the * SRAM is at 0xfff00000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), #else /* * *I*G - L3SRAM. When L3 is used as 1M SRAM, in case of Secure Boot - * the physical address of the SRAM is at CONFIG_SYS_INIT_L3_ADDR, + * the physical address of the SRAM is at CFG_SYS_INIT_L3_ADDR, * and virtual address is CONFIG_SYS_MONITOR_BASE */ SET_TLB_ENTRY(1, CONFIG_SYS_MONITOR_BASE & 0xfff00000, - CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, + CFG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), #endif @@ -80,13 +80,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -112,26 +112,26 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 6, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x00100000, + CFG_SYS_BMAN_MEM_PHYS + 0x00100000, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_1M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SW|MAS3_SR, 0, 0, 11, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x00100000, + CFG_SYS_QMAN_MEM_PHYS + 0x00100000, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 12, BOOKE_PAGESZ_1M, 1), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 13, BOOKE_PAGESZ_4M, 1), #endif diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 2bb838cea6..da2c1de078 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -29,15 +29,15 @@ #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #endif -#ifdef CONFIG_SYS_I2C_FPGA_ADDR +#ifdef CFG_SYS_I2C_FPGA_ADDR u8 qixis_read_i2c(unsigned int reg) { #if !CONFIG_IS_ENABLED(DM_I2C) - return i2c_reg_read(CONFIG_SYS_I2C_FPGA_ADDR, reg); + return i2c_reg_read(CFG_SYS_I2C_FPGA_ADDR, reg); #else struct udevice *dev; - if (i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev)) + if (i2c_get_chip_for_busnum(0, CFG_SYS_I2C_FPGA_ADDR, 1, &dev)) return 0xff; return dm_i2c_reg_read(dev, reg); @@ -48,11 +48,11 @@ void qixis_write_i2c(unsigned int reg, u8 value) { u8 val = value; #if !CONFIG_IS_ENABLED(DM_I2C) - i2c_reg_write(CONFIG_SYS_I2C_FPGA_ADDR, reg, val); + i2c_reg_write(CFG_SYS_I2C_FPGA_ADDR, reg, val); #else struct udevice *dev; - if (!i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev)) + if (!i2c_get_chip_for_busnum(0, CFG_SYS_I2C_FPGA_ADDR, 1, &dev)) dm_i2c_reg_write(dev, reg, val); #endif diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index af76327e4d..784046ac4e 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -100,12 +100,12 @@ u16 qixis_read_minor(void); char *qixis_read_time(char *result); char *qixis_read_tag(char *buf); const char *byte_to_binary_mask(u8 val, u8 mask, char *buf); -#ifdef CONFIG_SYS_I2C_FPGA_ADDR +#ifdef CFG_SYS_I2C_FPGA_ADDR u8 qixis_read_i2c(unsigned int reg); void qixis_write_i2c(unsigned int reg, u8 value); #endif -#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR) +#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CFG_SYS_I2C_FPGA_ADDR) #define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg)) #define QIXIS_WRITE(reg, value) \ qixis_write_i2c(offsetof(struct qixis, reg), value) @@ -114,7 +114,7 @@ void qixis_write_i2c(unsigned int reg, u8 value); #define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value) #endif -#ifdef CONFIG_SYS_I2C_FPGA_ADDR +#ifdef CFG_SYS_I2C_FPGA_ADDR #define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg)) #define QIXIS_WRITE_I2C(reg, value) \ qixis_write_i2c(offsetof(struct qixis, reg), value) diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c index f17a6c186d..194b5d2729 100644 --- a/board/freescale/ls1012aqds/ls1012aqds.c +++ b/board/freescale/ls1012aqds/ls1012aqds.c @@ -117,7 +117,7 @@ int misc_init_r(void) struct udevice *dev; int ret; - ret = i2c_get_chip_for_busnum(bus_num, CONFIG_SYS_I2C_FPGA_ADDR, + ret = i2c_get_chip_for_busnum(bus_num, CFG_SYS_I2C_FPGA_ADDR, 1, &dev); if (ret) { printf("%s: Cannot find udev for a bus %d\n", __func__, @@ -128,7 +128,7 @@ int misc_init_r(void) #else i2c_set_bus_num(bus_num); - i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); + i2c_write(CFG_SYS_I2C_FPGA_ADDR, 0x5a, 1, &mux_sdhc_cd, 1); #endif return 0; diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index d0674d014a..d5cb731209 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -196,7 +196,7 @@ void board_init_f(ulong dummy) porsr1 = in_be32(&gur->porsr1); pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) | DCFG_CCSR_PORSR1_RCW_SRC_I2C); - out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), + out_be32((unsigned int *)(CFG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1), pinctl); #endif diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 8b74d45823..4f5834347d 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -98,7 +98,7 @@ struct cpld_data { #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) static void cpld_show(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); printf("CPLD: V%x.%x\nPCBA: V%x.0\nVBank: %d\n", in_8(&cpld_data->cpld_ver) & VERSION_MASK, @@ -248,7 +248,7 @@ int board_eth_init(struct bd_info *bis) static void convert_serdes_mux(int type, int need_reset) { char current_serdes; - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); current_serdes = cpld_data->serdes_mux; @@ -322,7 +322,7 @@ int config_serdes_mux(void) #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) int config_board_mux(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); int conflict_flag; conflict_flag = 0; @@ -610,7 +610,7 @@ u16 flash_read16(void *addr) && !defined(CONFIG_SPL_BUILD) static void convert_flash_bank(char bank) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); printf("Now switch to boot from flash bank %d.\n", bank); cpld_data->soft_mux_on = CPLD_SET_BOOT_BANK; @@ -644,7 +644,7 @@ U_BOOT_CMD( static int cpld_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); if (argc > 2) return CMD_RET_USAGE; @@ -671,7 +671,7 @@ U_BOOT_CMD( static void print_serdes_mux(void) { char current_serdes; - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); current_serdes = cpld_data->serdes_mux; diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c index 5fe40c4bdb..841d8b59bb 100644 --- a/board/freescale/ls1043aqds/ls1043aqds.c +++ b/board/freescale/ls1043aqds/ls1043aqds.c @@ -57,8 +57,8 @@ enum { struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { { "nor0", - CONFIG_SYS_NOR0_CSPR, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR0_CSPR, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -71,8 +71,8 @@ struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor1", - CONFIG_SYS_NOR1_CSPR, - CONFIG_SYS_NOR1_CSPR_EXT, + CFG_SYS_NOR1_CSPR, + CFG_SYS_NOR1_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -97,15 +97,15 @@ struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, - CONFIG_SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_AMASK, + CFG_SYS_FPGA_CSOR, { - CONFIG_SYS_FPGA_FTIM0, - CONFIG_SYS_FPGA_FTIM1, - CONFIG_SYS_FPGA_FTIM2, - CONFIG_SYS_FPGA_FTIM3 + CFG_SYS_FPGA_FTIM0, + CFG_SYS_FPGA_FTIM1, + CFG_SYS_FPGA_FTIM2, + CFG_SYS_FPGA_FTIM3 }, } }; @@ -126,8 +126,8 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor0", - CONFIG_SYS_NOR0_CSPR, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR0_CSPR, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -139,8 +139,8 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor1", - CONFIG_SYS_NOR1_CSPR, - CONFIG_SYS_NOR1_CSPR_EXT, + CFG_SYS_NOR1_CSPR, + CFG_SYS_NOR1_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -152,15 +152,15 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, - CONFIG_SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_AMASK, + CFG_SYS_FPGA_CSOR, { - CONFIG_SYS_FPGA_FTIM0, - CONFIG_SYS_FPGA_FTIM1, - CONFIG_SYS_FPGA_FTIM2, - CONFIG_SYS_FPGA_FTIM3 + CFG_SYS_FPGA_FTIM0, + CFG_SYS_FPGA_FTIM1, + CFG_SYS_FPGA_FTIM2, + CFG_SYS_FPGA_FTIM3 }, } }; diff --git a/board/freescale/ls1043ardb/cpld.c b/board/freescale/ls1043ardb/cpld.c index 232035638b..9db3aa5860 100644 --- a/board/freescale/ls1043ardb/cpld.c +++ b/board/freescale/ls1043ardb/cpld.c @@ -12,14 +12,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index a8a7263a65..741a4d64ea 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -60,15 +60,15 @@ struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "cpld", - CONFIG_SYS_CPLD_CSPR, - CONFIG_SYS_CPLD_CSPR_EXT, - CONFIG_SYS_CPLD_AMASK, - CONFIG_SYS_CPLD_CSOR, + CFG_SYS_CPLD_CSPR, + CFG_SYS_CPLD_CSPR_EXT, + CFG_SYS_CPLD_AMASK, + CFG_SYS_CPLD_CSOR, { - CONFIG_SYS_CPLD_FTIM0, - CONFIG_SYS_CPLD_FTIM1, - CONFIG_SYS_CPLD_FTIM2, - CONFIG_SYS_CPLD_FTIM3 + CFG_SYS_CPLD_FTIM0, + CFG_SYS_CPLD_FTIM1, + CFG_SYS_CPLD_FTIM2, + CFG_SYS_CPLD_FTIM3 }, } }; @@ -102,15 +102,15 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "cpld", - CONFIG_SYS_CPLD_CSPR, - CONFIG_SYS_CPLD_CSPR_EXT, - CONFIG_SYS_CPLD_AMASK, - CONFIG_SYS_CPLD_CSOR, + CFG_SYS_CPLD_CSPR, + CFG_SYS_CPLD_CSPR_EXT, + CFG_SYS_CPLD_AMASK, + CFG_SYS_CPLD_CSOR, { - CONFIG_SYS_CPLD_FTIM0, - CONFIG_SYS_CPLD_FTIM1, - CONFIG_SYS_CPLD_FTIM2, - CONFIG_SYS_CPLD_FTIM3 + CFG_SYS_CPLD_FTIM0, + CFG_SYS_CPLD_FTIM1, + CFG_SYS_CPLD_FTIM2, + CFG_SYS_CPLD_FTIM3 }, } }; diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c index 97d71dbf2a..3d0881643c 100644 --- a/board/freescale/ls1046aqds/ls1046aqds.c +++ b/board/freescale/ls1046aqds/ls1046aqds.c @@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR; struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { { "nor0", - CONFIG_SYS_NOR0_CSPR, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR0_CSPR, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -55,8 +55,8 @@ struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor1", - CONFIG_SYS_NOR1_CSPR, - CONFIG_SYS_NOR1_CSPR_EXT, + CFG_SYS_NOR1_CSPR, + CFG_SYS_NOR1_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -81,15 +81,15 @@ struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, - CONFIG_SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_AMASK, + CFG_SYS_FPGA_CSOR, { - CONFIG_SYS_FPGA_FTIM0, - CONFIG_SYS_FPGA_FTIM1, - CONFIG_SYS_FPGA_FTIM2, - CONFIG_SYS_FPGA_FTIM3 + CFG_SYS_FPGA_FTIM0, + CFG_SYS_FPGA_FTIM1, + CFG_SYS_FPGA_FTIM2, + CFG_SYS_FPGA_FTIM3 }, } }; @@ -110,8 +110,8 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor0", - CONFIG_SYS_NOR0_CSPR, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR0_CSPR, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -123,8 +123,8 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "nor1", - CONFIG_SYS_NOR1_CSPR, - CONFIG_SYS_NOR1_CSPR_EXT, + CFG_SYS_NOR1_CSPR, + CFG_SYS_NOR1_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -136,15 +136,15 @@ struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, - CONFIG_SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_AMASK, + CFG_SYS_FPGA_CSOR, { - CONFIG_SYS_FPGA_FTIM0, - CONFIG_SYS_FPGA_FTIM1, - CONFIG_SYS_FPGA_FTIM2, - CONFIG_SYS_FPGA_FTIM3 + CFG_SYS_FPGA_FTIM0, + CFG_SYS_FPGA_FTIM1, + CFG_SYS_FPGA_FTIM2, + CFG_SYS_FPGA_FTIM3 }, } }; diff --git a/board/freescale/ls1046ardb/cpld.c b/board/freescale/ls1046ardb/cpld.c index 548601a5ae..ee19d4ff8a 100644 --- a/board/freescale/ls1046ardb/cpld.c +++ b/board/freescale/ls1046ardb/cpld.c @@ -12,14 +12,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c index ff3abc8302..0d3f22ce2b 100644 --- a/board/freescale/ls1088a/ls1088a.c +++ b/board/freescale/ls1088a/ls1088a.c @@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR; struct ifc_regs ifc_cfg_ifc_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { { "nor0", - CONFIG_SYS_NOR0_CSPR_EARLY, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR0_CSPR_EARLY, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK, CFG_SYS_NOR_CSOR, { @@ -52,13 +52,13 @@ struct ifc_regs ifc_cfg_ifc_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { CFG_SYS_NOR_FTIM3 }, 0, - CONFIG_SYS_NOR0_CSPR, + CFG_SYS_NOR0_CSPR, 0, }, { "nor1", - CONFIG_SYS_NOR1_CSPR_EARLY, - CONFIG_SYS_NOR0_CSPR_EXT, + CFG_SYS_NOR1_CSPR_EARLY, + CFG_SYS_NOR0_CSPR_EXT, CFG_SYS_NOR_AMASK_EARLY, CFG_SYS_NOR_CSOR, { @@ -68,7 +68,7 @@ struct ifc_regs ifc_cfg_ifc_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { CFG_SYS_NOR_FTIM3 }, 0, - CONFIG_SYS_NOR1_CSPR, + CFG_SYS_NOR1_CSPR, CFG_SYS_NOR_AMASK, }, { @@ -86,10 +86,10 @@ struct ifc_regs ifc_cfg_ifc_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSOR, { SYS_FPGA_CS_FTIM0, SYS_FPGA_CS_FTIM1, @@ -121,10 +121,10 @@ struct ifc_regs ifc_cfg_qspi_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { }, { "fpga", - CONFIG_SYS_FPGA_CSPR, - CONFIG_SYS_FPGA_CSPR_EXT, + CFG_SYS_FPGA_CSPR, + CFG_SYS_FPGA_CSPR_EXT, SYS_FPGA_AMASK, - CONFIG_SYS_FPGA_CSOR, + CFG_SYS_FPGA_CSOR, { SYS_FPGA_CS_FTIM0, SYS_FPGA_CS_FTIM1, @@ -746,12 +746,12 @@ int set_serdes_volt(int svdd) /* Read the BRDCFG54 via CLPD */ #if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_read(CONFIG_SYS_I2C_FPGA_ADDR, + ret = i2c_read(CFG_SYS_I2C_FPGA_ADDR, QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1); #else struct udevice *dev; - ret = i2c_get_chip_for_busnum(0, CONFIG_SYS_I2C_FPGA_ADDR, 1, &dev); + ret = i2c_get_chip_for_busnum(0, CFG_SYS_I2C_FPGA_ADDR, 1, &dev); if (!ret) ret = dm_i2c_read(dev, QIXIS_BRDCFG4_OFFSET, (void *)&brdcfg4, 1); @@ -766,7 +766,7 @@ int set_serdes_volt(int svdd) /* Write to the BRDCFG4 */ #if !CONFIG_IS_ENABLED(DM_I2C) - ret = i2c_write(CONFIG_SYS_I2C_FPGA_ADDR, + ret = i2c_write(CFG_SYS_I2C_FPGA_ADDR, QIXIS_BRDCFG4_OFFSET, 1, (void *)&brdcfg4, 1); #else ret = dm_i2c_write(dev, QIXIS_BRDCFG4_OFFSET, diff --git a/board/freescale/ls2080aqds/README b/board/freescale/ls2080aqds/README index 971633c9c8..a4cb1a6cac 100644 --- a/board/freescale/ls2080aqds/README +++ b/board/freescale/ls2080aqds/README @@ -118,10 +118,10 @@ Kernel.itb 0x01000000 0x08000 Environment Variables --------------------- - mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined - the value CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. + the value CFG_SYS_LS_MC_BOOT_TIMEOUT_MS will be assumed. - mcmemsize: MC DRAM block size. If this variable is not defined - the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. + the value CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. Booting Linux flavors which do not support 48-bit VA (< Linux 3.18) ------------------------------------------------------------------- diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 5df85722d1..91db618227 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -217,7 +217,7 @@ int board_init(void) #ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT #if CONFIG_IS_ENABLED(DM_I2C) - rtc_enable_32khz_output(0, CONFIG_SYS_I2C_RTC_ADDR); + rtc_enable_32khz_output(0, CFG_SYS_I2C_RTC_ADDR); #else rtc_enable_32khz_output(); #endif diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c index 437675517e..cf5b1ee46e 100644 --- a/board/freescale/lx2160a/lx2160a.c +++ b/board/freescale/lx2160a/lx2160a.c @@ -57,9 +57,9 @@ DECLARE_GLOBAL_DATA_PTR; static struct pl01x_serial_plat serial0 = { #if CONFIG_CONS_INDEX == 0 - .base = CONFIG_SYS_SERIAL0, + .base = CFG_SYS_SERIAL0, #elif CONFIG_CONS_INDEX == 1 - .base = CONFIG_SYS_SERIAL1, + .base = CFG_SYS_SERIAL1, #else #error "Unsupported console index value." #endif @@ -72,7 +72,7 @@ U_BOOT_DRVINFO(nxp_serial0) = { }; static struct pl01x_serial_plat serial1 = { - .base = CONFIG_SYS_SERIAL1, + .base = CFG_SYS_SERIAL1, .type = TYPE_PL011, }; diff --git a/board/freescale/m5249evb/m5249evb.c b/board/freescale/m5249evb/m5249evb.c index efff055140..d67db24d58 100644 --- a/board/freescale/m5249evb/m5249evb.c +++ b/board/freescale/m5249evb/m5249evb.c @@ -26,7 +26,7 @@ int checkboard (void) { /* * Set LED on */ - val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED; + val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CFG_SYS_GPIO1_LED; mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */ return 0; @@ -42,13 +42,13 @@ int dram_init(void) * RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1 */ -#ifdef CONFIG_SYS_FAST_CLK +#ifdef CFG_SYS_FAST_CLK /* * Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39 */ mbar_writeShort(MCFSIM_DCR, 0x8239); -#elif CONFIG_SYS_PLL_BYPASS +#elif CFG_SYS_PLL_BYPASS /* * Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K) * SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02 diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c index bff1ac5fb1..fbd4835416 100644 --- a/board/freescale/m5253demo/flash.c +++ b/board/freescale/m5253demo/flash.c @@ -42,7 +42,7 @@ ulong flash_init(void) ulong size = 0; ulong fbase = 0; - fbase = (ulong) CONFIG_SYS_FLASH_BASE; + fbase = (ulong) CFG_SYS_FLASH_BASE; flash_get_size((FPWV *) fbase, &flash_info[0]); flash_get_offsets((ulong) fbase, &flash_info[0]); fbase += flash_info[0].size; @@ -64,9 +64,9 @@ int flash_get_offsets(ulong base, flash_info_t * info) info->start[0] = base; info->protect[0] = 0; - for (i = 1; i < CONFIG_SYS_SST_SECT; i++) { + for (i = 1; i < CFG_SYS_SST_SECT; i++) { info->start[i] = info->start[i - 1] - + CONFIG_SYS_SST_SECTSZ; + + CFG_SYS_SST_SECTSZ; info->protect[i] = 0; } } @@ -162,8 +162,8 @@ ulong flash_get_size(FPWV * addr, flash_info_t * info) info->sector_count = 0; info->size = 0; - info->sector_count = CONFIG_SYS_SST_SECT; - info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ; + info->sector_count = CFG_SYS_SST_SECT; + info->size = CFG_SYS_SST_SECT * CFG_SYS_SST_SECTSZ; /* reset ID mode */ *addr = (FPWV) 0x00F000F0; @@ -222,7 +222,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) start = get_timer(0); - if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) { + if ((s_last - s_first) == (CFG_SYS_SST_SECT - 1)) { if (prot == 0) { addr = (FPWV *) info->start[0]; @@ -259,7 +259,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) enable_interrupts(); return 0; - } else if (prot == CONFIG_SYS_SST_SECT) { + } else if (prot == CFG_SYS_SST_SECT) { return 1; } } @@ -282,7 +282,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) flag = disable_interrupts(); - base = (FPWV *) (CONFIG_SYS_FLASH_BASE); /* First sector */ + base = (FPWV *) (CFG_SYS_FLASH_BASE); /* First sector */ base[FLASH_CYCLE1] = 0x00AA; /* unlock */ base[FLASH_CYCLE2] = 0x0055; /* unlock */ @@ -411,7 +411,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data) return (2); } - base = (FPWV *) (CONFIG_SYS_FLASH_BASE); + base = (FPWV *) (CFG_SYS_FLASH_BASE); /* Disable interrupts which might cause a timeout here */ flag = disable_interrupts(); diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index 179a2a242a..c1cff52fb3 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -36,7 +36,7 @@ int dram_init(void) if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) { u32 RC, temp; - RC = (CONFIG_SYS_CLK / 1000000) >> 1; + RC = (CFG_SYS_CLK / 1000000) >> 1; RC = (RC * 15) >> 4; /* Initialize DRAM Control Register: DCR */ @@ -113,7 +113,7 @@ void ide_set_reset(int idereset) mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); #define CALC_TIMING(t) (t + period - 1) / period - period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */ + period = 1000000000 / (CFG_SYS_CLK / 2); /* period in ns */ /*ata->ton = CALC_TIMING (180); */ out_8(&ata->t1, CALC_TIMING(piotms[2][0])); diff --git a/board/freescale/m53017evb/README b/board/freescale/m53017evb/README index 0de36a7f74..34f05f3fdc 100644 --- a/board/freescale/m53017evb/README +++ b/board/freescale/m53017evb/README @@ -68,7 +68,7 @@ CONFIG_M53015 -- define for MCF53015 CPUs CONFIG_M53017EVB -- define for M53017EVB board CONFIG_MCFUART -- define to use common CF Uart driver -CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 +CFG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFRTC -- define to use common CF RTC driver @@ -96,11 +96,11 @@ CONFIG_SYS_I2C_SLAVE -- define for I2C slave address CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset CONFIG_SYS_IMMR -- define for MBAR offset -CONFIG_SYS_MBAR -- define MBAR offset +CFG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support -CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM +CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5301x internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index a10c365ec3..d921eef8b6 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -23,7 +23,7 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd_to_nand(mtdinfo); - volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; + volatile u16 *nCE = (u16 *) CFG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; diff --git a/board/freescale/m5373evb/README b/board/freescale/m5373evb/README index bfbcd5dc81..7240648796 100644 --- a/board/freescale/m5373evb/README +++ b/board/freescale/m5373evb/README @@ -67,7 +67,7 @@ CONFIG_M5373 -- define for all Freescale MCF5373 CPUs CONFIG_M5373EVB -- define for M5373EVB board CONFIG_MCFUART -- define to use common CF Uart driver -CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 +CFG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 CONFIG_BAUDRATE -- define UART baudrate CONFIG_MCFRTC -- define to use common CF RTC driver @@ -95,11 +95,11 @@ CONFIG_SYS_I2C_SLAVE -- define for I2C slave address CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset CONFIG_SYS_IMMR -- define for MBAR offset -CONFIG_SYS_MBAR -- define MBAR offset +CFG_SYS_MBAR -- define MBAR offset CONFIG_MONITOR_IS_IN_RAM -- Not support -CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM +CFG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c index fdf3e0ac1b..6d825a66e3 100644 --- a/board/freescale/m5373evb/nand.c +++ b/board/freescale/m5373evb/nand.c @@ -23,7 +23,7 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd_to_nand(mtdinfo); - volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR; + volatile u16 *nCE = (u16 *) CFG_SYS_LATCH_ADDR; if (ctrl & NAND_CTRL_CHANGE) { ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 85d43cccd1..4a14554026 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -22,7 +22,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SYS_DRAM_TEST) +#if defined(CFG_SYS_DRAM_TEST) int testdram(void) { @@ -103,25 +103,25 @@ int fixed_sdram(void) im->sysconf.ddrlaw[0].bar = CFG_SYS_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1); - im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE; + im->sysconf.ddrcdr = CFG_SYS_DDRCDR_VALUE; udelay(50000); - im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL; + im->ddr.sdram_clk_cntl = CFG_SYS_DDR_SDRAM_CLK_CNTL; udelay(1000); - im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.csbnds[0].csbnds = CFG_SYS_DDR_CS0_BNDS; + im->ddr.cs_config[0] = CFG_SYS_DDR_CS0_CONFIG; udelay(1000); - im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG; - im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2; - im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE; - im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2; - im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; + im->ddr.timing_cfg_0 = CFG_SYS_DDR_TIMING_0; + im->ddr.timing_cfg_1 = CFG_SYS_DDR_TIMING_1; + im->ddr.timing_cfg_2 = CFG_SYS_DDR_TIMING_2; + im->ddr.timing_cfg_3 = CFG_SYS_DDR_TIMING_3; + im->ddr.sdram_cfg = CFG_SYS_DDR_SDRAM_CFG; + im->ddr.sdram_cfg2 = CFG_SYS_DDR_SDRAM_CFG2; + im->ddr.sdram_mode = CFG_SYS_DDR_MODE; + im->ddr.sdram_mode2 = CFG_SYS_DDR_MODE2; + im->ddr.sdram_interval = CFG_SYS_DDR_INTERVAL; sync(); udelay(1000); diff --git a/board/freescale/mpc8548cds/law.c b/board/freescale/mpc8548cds/law.c index d194388991..7b6ef5b11c 100644 --- a/board/freescale/mpc8548cds/law.c +++ b/board/freescale/mpc8548cds/law.c @@ -12,7 +12,7 @@ struct law_entry law_table[] = { /* LBC window - maps 256M */ - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_LBC_SDRAM_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index e4c951feb5..73e024eaa0 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -103,11 +103,11 @@ void lbc_sdram_init(void) uint idx; volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; + uint *sdram_addr = (uint *)CFG_SYS_LBC_SDRAM_BASE; uint lsdmr_common; puts("LBC SDRAM: "); - print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, + print_size(CFG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n"); /* @@ -115,17 +115,17 @@ void lbc_sdram_init(void) */ set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); - lbc->lbcr = CONFIG_SYS_LBC_LBCR; + lbc->lbcr = CFG_SYS_LBC_LBCR; asm("msync"); - lbc->lsrt = CONFIG_SYS_LBC_LSRT; - lbc->mrtpr = CONFIG_SYS_LBC_MRTPR; + lbc->lsrt = CFG_SYS_LBC_LSRT; + lbc->mrtpr = CFG_SYS_LBC_MRTPR; asm("msync"); /* * MPC8548 uses "new" 15-16 style addressing. */ - lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; + lsdmr_common = CFG_SYS_LBC_LSDMR_COMMON; lsdmr_common |= LSDMR_BSMA1516; /* diff --git a/board/freescale/mpc8548cds/tlb.c b/board/freescale/mpc8548cds/tlb.c index 9c8e948600..994a32dd92 100644 --- a/board/freescale/mpc8548cds/tlb.c +++ b/board/freescale/mpc8548cds/tlb.c @@ -11,16 +11,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, CFG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024 , CFG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024 , CFG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024 , CFG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -29,7 +29,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * Entry 0: * FLASH(cover boot page) 16M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_16M, 1), @@ -37,7 +37,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * Entry 1: * CCSRBAR 1M Non-cacheable, guarded */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), @@ -45,8 +45,8 @@ struct fsl_e_tlb_entry tlb_table[] = { * Entry 2: * LBC SDRAM 64M Cacheable, non-guarded */ - SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, - CONFIG_SYS_LBC_SDRAM_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_LBC_SDRAM_BASE, + CFG_SYS_LBC_SDRAM_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 2, BOOKE_PAGESZ_64M, 1), diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 4f27d3e8ec..d447ad840a 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -42,7 +42,7 @@ u32 get_board_rev(void) int rev = readl(&fuse->gp[6]); - if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) + if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR)) rev = 0; return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; @@ -81,7 +81,7 @@ static int power_init(void) int ret; struct pmic *p; - if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { + if (!i2c_probe(CFG_SYS_DIALOG_PMIC_I2C_ADDR)) { ret = pmic_dialog_init(I2C_PMIC); if (ret) return ret; diff --git a/board/freescale/p1010rdb/law.c b/board/freescale/p1010rdb/law.c index 2dcee79b3a..13fc2fa2e3 100644 --- a/board/freescale/p1010rdb/law.c +++ b/board/freescale/p1010rdb/law.c @@ -8,8 +8,8 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), }; diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index ab3b2e3e69..0f014823c9 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -83,7 +83,7 @@ struct cpld_data { int board_early_init_f(void) { ccsr_gpio_t *pgpio = (void *)(CFG_SYS_MPC85xx_GPIO_ADDR); - struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL}; /* Clock configuration to access CPLD using IFC(GPCM) */ setbits_be32(&ifc.gregs->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); /* @@ -97,7 +97,7 @@ int board_early_init_f(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -118,12 +118,12 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_16M, 1); set_tlb(1, flashbase + 0x1000000, - CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000, + CFG_SYS_FLASH_BASE_PHYS + 0x1000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel+1, BOOKE_PAGESZ_16M, 1); return 0; @@ -138,7 +138,7 @@ int config_board_mux(int ctrl_type) struct udevice *dev; int ret; #if defined(CONFIG_TARGET_P1010RDB_PA) - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); ret = i2c_get_chip_for_busnum(I2C_PCA9557_BUS_NUM, I2C_PCA9557_ADDR1, 1, &dev); @@ -254,7 +254,7 @@ int config_board_mux(int ctrl_type) #endif #else #if defined(CONFIG_TARGET_P1010RDB_PA) - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); switch (ctrl_type) { case MUX_TYPE_IFC: @@ -404,7 +404,7 @@ int i2c_pca9557_read(int type) int checkboard(void) { struct cpu_type *cpu; - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); u8 val; cpu = gd->arch.cpu; diff --git a/board/freescale/p1010rdb/spl.c b/board/freescale/p1010rdb/spl.c index 9bf948cb5c..e450f626e0 100644 --- a/board/freescale/p1010rdb/spl.c +++ b/board/freescale/p1010rdb/spl.c @@ -29,7 +29,7 @@ void board_init_f(ulong bootflag) { u32 plat_ratio; ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR; - struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL}; console_init_f(); diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c index 5e1fa70bca..265cde81a3 100644 --- a/board/freescale/p1010rdb/tlb.c +++ b/board/freescale/p1010rdb/tlb.c @@ -8,19 +8,19 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, CFG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CFG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CFG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CFG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -36,17 +36,17 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), #ifndef CONFIG_SPL_BUILD - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, - CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE + 0x1000000, + CFG_SYS_FLASH_BASE_PHYS + 0x1000000, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 3, BOOKE_PAGESZ_16M, 1), @@ -64,7 +64,7 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G - Board CPLD */ - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_256K, 1), @@ -73,14 +73,14 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_1M, 1), #if defined(CONFIG_SYS_RAMBOOT) || !CONFIG_IS_ENABLED(COMMON_INIT_DDR) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 8, BOOKE_PAGESZ_1G, 1), #endif -#ifdef CONFIG_SYS_INIT_L2_ADDR +#ifdef CFG_SYS_INIT_L2_ADDR /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L2_ADDR, CFG_SYS_INIT_L2_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, 0, 11, BOOKE_PAGESZ_256K, 1) #endif diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index f896fd7ccc..5f16779aba 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -201,7 +201,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, } #endif /* CONFIG_SYS_DDR_RAW_TIMING */ -#ifdef CONFIG_SYS_DDR_CS0_BNDS +#ifdef CFG_SYS_DDR_CS0_BNDS /* Fixed sdram init -- doesn't use serial presence detect. */ phys_size_t fixed_sdram(void) { @@ -209,35 +209,35 @@ phys_size_t fixed_sdram(void) char buf[32]; size_t ddr_size; fsl_ddr_cfg_regs_t ddr_cfg_regs = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, + .cs[0].bnds = CFG_SYS_DDR_CS0_BNDS, + .cs[0].config = CFG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CFG_SYS_DDR_CS0_CONFIG_2, #if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2, + .cs[1].bnds = CFG_SYS_DDR_CS1_BNDS, + .cs[1].config = CFG_SYS_DDR_CS1_CONFIG, + .cs[1].config_2 = CFG_SYS_DDR_CS1_CONFIG_2, #endif - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2, - .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL, + .timing_cfg_3 = CFG_SYS_DDR_TIMING_3, + .timing_cfg_0 = CFG_SYS_DDR_TIMING_0, + .timing_cfg_1 = CFG_SYS_DDR_TIMING_1, + .timing_cfg_2 = CFG_SYS_DDR_TIMING_2, + .ddr_sdram_cfg = CFG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CFG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CFG_SYS_DDR_MODE_1, + .ddr_sdram_mode_2 = CFG_SYS_DDR_MODE_2, + .ddr_sdram_md_cntl = CFG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CFG_SYS_DDR_INTERVAL, .ddr_data_init = 0xdeadbeef, /* Poison value */ - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, - .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 + .ddr_sdram_clk_cntl = CFG_SYS_DDR_CLK_CTRL, + .ddr_init_addr = CFG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CFG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CFG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CFG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CFG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CFG_SYS_DDR_WRLVL_CONTROL, + .ddr_sr_cntr = CFG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CFG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CFG_SYS_DDR_RCW_2 }; get_sys_info(&sysinfo); @@ -248,7 +248,7 @@ phys_size_t fixed_sdram(void) fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + if (set_ddr_laws(CFG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { printf("ERROR setting Local Access Windows for DDR\n"); return 0; diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c index 8f3f4840e6..6085984eab 100644 --- a/board/freescale/p1_p2_rdb_pc/law.c +++ b/board/freescale/p1_p2_rdb_pc/law.c @@ -8,11 +8,11 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #ifdef CONFIG_VSC7385_ENET - SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC), #endif diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 2999c85d0a..ab79724429 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -90,20 +90,20 @@ void board_reset_prepare(void) * This ensures that external watchdog does not trigger * another reset or possible infinite reset loop. */ - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); out_8(&cpld_data->wd_cfg, CPLD_WD_CFG); in_8(&cpld_data->wd_cfg); /* Read back to sync write */ } void board_reset_last(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); out_8(&cpld_data->system_rst, 1); } void board_cpld_init(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); u8 prev_wd_cfg = in_8(&cpld_data->wd_cfg); out_8(&cpld_data->wd_cfg, CPLD_WD_CFG); @@ -226,7 +226,7 @@ int board_early_init_f(void) int checkboard(void) { - struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + struct cpld_data *cpld_data = (void *)(CFG_SYS_CPLD_BASE); ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); u8 in, out, invert, io_config, val; int bus_num = CONFIG_SYS_SPD_BUS_NUM; @@ -246,7 +246,7 @@ int checkboard(void) struct udevice *dev; int ret; - ret = i2c_get_chip_for_busnum(bus_num, CONFIG_SYS_I2C_PCA9557_ADDR, + ret = i2c_get_chip_for_busnum(bus_num, CFG_SYS_I2C_PCA9557_ADDR, 1, &dev); if (ret) { printf("%s: Cannot find udev for a bus %d\n", __func__, @@ -264,10 +264,10 @@ int checkboard(void) #else /* Non DM I2C support - will be removed */ i2c_set_bus_num(bus_num); - if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 || - i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 || - i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 2, 1, &invert, 1) < 0 || - i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) { + if (i2c_read(CFG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 || + i2c_read(CFG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 || + i2c_read(CFG_SYS_I2C_PCA9557_ADDR, 2, 1, &invert, 1) < 0 || + i2c_read(CFG_SYS_I2C_PCA9557_ADDR, 3, 1, &io_config, 1) < 0) { printf("Error reading i2c boot information!\n"); return 0; /* Don't want to hang() on this error */ } @@ -319,7 +319,7 @@ int checkboard(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); #ifdef CONFIG_VSC7385_ENET unsigned int vscfw_addr; @@ -344,7 +344,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */ 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 4cc5e01f57..94773969e9 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -8,20 +8,20 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -32,14 +32,14 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 0, BOOKE_PAGESZ_4K, 1), /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), #ifndef CONFIG_SPL_BUILD /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_64M, 1), @@ -57,13 +57,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #ifdef CONFIG_VSC7385_ENET /* *I*G - VSC7385 Switch */ - SET_TLB_ENTRY(1, CONFIG_SYS_VSC7385_BASE, CONFIG_SYS_VSC7385_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_VSC7385_BASE, CFG_SYS_VSC7385_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_1M, 1), #endif #endif /* not SPL */ - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), @@ -76,27 +76,27 @@ struct fsl_e_tlb_entry tlb_table[] = { #if defined(CONFIG_SYS_RAMBOOT) || !CONFIG_IS_ENABLED(COMMON_INIT_DDR) /* **M** - 1G DDR for eSDHC/eSPI/NAND boot */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 8, BOOKE_PAGESZ_1G, 1), #if defined(CONFIG_TARGET_P1020RDB_PD) /* **M** - 2G DDR on P1020MBG, map the second 1G */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE + 0x40000000, + CFG_SYS_DDR_SDRAM_BASE + 0x40000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 9, BOOKE_PAGESZ_1G, 1), #endif #endif /* RAMBOOT/SPL */ -#ifdef CONFIG_SYS_INIT_L2_ADDR +#ifdef CFG_SYS_INIT_L2_ADDR /* ***G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L2_ADDR, CFG_SYS_INIT_L2_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, 0, 11, BOOKE_PAGESZ_256K, 1), #if CONFIG_SYS_L2_SIZE >= (256 << 10) - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L2_ADDR + 0x40000, + CFG_SYS_INIT_L2_ADDR_PHYS + 0x40000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, 0, 12, BOOKE_PAGESZ_256K, 1) #endif diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c index 23ec32b7f9..3e12c816ab 100644 --- a/board/freescale/p2041rdb/eth.c +++ b/board/freescale/p2041rdb/eth.c @@ -35,10 +35,10 @@ static u8 lane_to_slot[] = { }; static int riser_phy_addr[] = { - CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, - CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, - CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, - CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, + CFG_SYS_FM1_DTSEC1_RISER_PHY_ADDR, + CFG_SYS_FM1_DTSEC2_RISER_PHY_ADDR, + CFG_SYS_FM1_DTSEC3_RISER_PHY_ADDR, + CFG_SYS_FM1_DTSEC4_RISER_PHY_ADDR, }; /* @@ -101,12 +101,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, slot = lane_to_slot[lane]; if (slot) { sprintf(phy, "phy_sgmii_%x", - CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + CFG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + (port - FM1_DTSEC1)); fdt_set_phy_handle(fdt, compat, addr, phy); } else { sprintf(phy, "phy_sgmii_%x", - CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + CFG_SYS_FM1_DTSEC1_PHY_ADDR + (port - FM1_DTSEC1)); fdt_set_phy_handle(fdt, compat, addr, phy); } @@ -158,9 +158,9 @@ int board_eth_init(struct bd_info *bis) * is RGMII, we'll also override its PHY address later. We assume that * DTSEC4 and DTSEC5 are used for RGMII. */ - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, CFG_SYS_FM1_DTSEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, CFG_SYS_FM1_DTSEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, CFG_SYS_FM1_DTSEC3_PHY_ADDR); for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CFG_SYS_NUM_FM1_DTSEC; i++) { int idx = i - FM1_DTSEC1; @@ -180,8 +180,8 @@ int board_eth_init(struct bd_info *bis) case PHY_INTERFACE_MODE_RGMII_ID: /* Only DTSEC4 and DTSEC5 can be routed to RGMII */ fm_info_set_phy_address(i, i == FM1_DTSEC5 ? - CONFIG_SYS_FM1_DTSEC5_PHY_ADDR : - CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); + CFG_SYS_FM1_DTSEC5_PHY_ADDR : + CFG_SYS_FM1_DTSEC4_PHY_ADDR); break; default: printf("Fman1: DTSEC%u set to unknown interface %i\n", @@ -198,7 +198,7 @@ int board_eth_init(struct bd_info *bis) slot = lane_to_slot[lane]; if (slot) fm_info_set_phy_address(FM1_10GEC1, - CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + CFG_SYS_FM1_10GEC1_PHY_ADDR); } fm_info_set_mdio(FM1_10GEC1, diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 1b1263091e..575259b19c 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -119,7 +119,7 @@ void board_config_lanes_mux(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -140,7 +140,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); diff --git a/board/freescale/t102xrdb/cpld.c b/board/freescale/t102xrdb/cpld.c index 47c3b1627e..17a6226caf 100644 --- a/board/freescale/t102xrdb/cpld.c +++ b/board/freescale/t102xrdb/cpld.c @@ -14,14 +14,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index 818c20cf1b..1b41739899 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -222,7 +222,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, #if defined(CONFIG_DEEP_SLEEP) void board_mem_sleep_setup(void) { - void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; + void __iomem *cpld_base = (void *)CFG_SYS_CPLD_BASE; /* does not provide HW signals for power management */ clrbits_8(cpld_base + 0x17, 0x40); diff --git a/board/freescale/t102xrdb/law.c b/board/freescale/t102xrdb/law.c index 850ece0110..d636bef325 100644 --- a/board/freescale/t102xrdb/law.c +++ b/board/freescale/t102xrdb/law.c @@ -9,19 +9,19 @@ struct law_entry law_table[] = { #ifdef CONFIG_MTD_NOR_FLASH - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif -#ifdef CONFIG_SYS_CPLD_BASE_PHYS - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_CPLD_BASE_PHYS + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index f777f5a2fe..baa59615b3 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -130,8 +130,8 @@ int board_early_init_f(void) int board_early_init_r(void) { -#ifdef CONFIG_SYS_FLASH_BASE - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; +#ifdef CFG_SYS_FLASH_BASE + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -150,7 +150,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); #endif diff --git a/board/freescale/t102xrdb/tlb.c b/board/freescale/t102xrdb/tlb.c index 74744c8ab0..2519a9e4db 100644 --- a/board/freescale/t102xrdb/tlb.c +++ b/board/freescale/t102xrdb/tlb.c @@ -8,31 +8,31 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) /* * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the * SRAM is at 0xfffc0000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_256K, 1), #else @@ -42,13 +42,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -64,27 +64,27 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 4, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 5, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_16M, 1), #endif #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 9, BOOKE_PAGESZ_4M, 1), #endif @@ -93,18 +93,18 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_64K, 1), #endif -#ifdef CONFIG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, +#ifdef CFG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 11, BOOKE_PAGESZ_256K, 1), #endif #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 12, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE + 0x40000000, + CFG_SYS_DDR_SDRAM_BASE + 0x40000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 13, BOOKE_PAGESZ_1G, 1) #endif diff --git a/board/freescale/t104xrdb/cpld.c b/board/freescale/t104xrdb/cpld.c index ac34095f3b..9ac57bbd83 100644 --- a/board/freescale/t104xrdb/cpld.c +++ b/board/freescale/t104xrdb/cpld.c @@ -7,7 +7,7 @@ * * The following macros need to be defined: * - * CONFIG_SYS_CPLD_BASE-The virtual address of the base of the CPLD register map + * CFG_SYS_CPLD_BASE-The virtual address of the base of the CPLD register map */ #include <common.h> @@ -18,14 +18,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index 539a36d2a9..02ddb66141 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -115,7 +115,7 @@ found: #if defined(CONFIG_DEEP_SLEEP) void board_mem_sleep_setup(void) { - void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; + void __iomem *cpld_base = (void *)CFG_SYS_CPLD_BASE; /* does not provide HW signals for power management */ clrbits_8(cpld_base + 0x17, 0x40); diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index 5ce24b4096..fe51d68c7b 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -49,7 +49,7 @@ int board_eth_init(struct bd_info *bis) * DTSEC3 */ fm_info_set_phy_address(FM1_DTSEC3, - CONFIG_SYS_SGMII1_PHY_ADDR); + CFG_SYS_SGMII1_PHY_ADDR); break; #endif #ifdef CONFIG_TARGET_T1042RDB @@ -59,7 +59,7 @@ int board_eth_init(struct bd_info *bis) fm_info_set_phy_address(i, 0); /* T1042RDB only supports SGMII on DTSEC3 */ fm_info_set_phy_address(FM1_DTSEC3, - CONFIG_SYS_SGMII1_PHY_ADDR); + CFG_SYS_SGMII1_PHY_ADDR); break; #endif #ifdef CONFIG_TARGET_T1042D4RDB @@ -68,11 +68,11 @@ int board_eth_init(struct bd_info *bis) * & DTSEC3 */ if (FM1_DTSEC1 == i) - phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR; + phy_addr = CFG_SYS_SGMII1_PHY_ADDR; if (FM1_DTSEC2 == i) - phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR; + phy_addr = CFG_SYS_SGMII2_PHY_ADDR; if (FM1_DTSEC3 == i) - phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR; + phy_addr = CFG_SYS_SGMII3_PHY_ADDR; fm_info_set_phy_address(i, phy_addr); break; #endif @@ -81,9 +81,9 @@ int board_eth_init(struct bd_info *bis) case PHY_INTERFACE_MODE_RGMII_RXID: case PHY_INTERFACE_MODE_RGMII_ID: if (FM1_DTSEC4 == i) - phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; + phy_addr = CFG_SYS_RGMII1_PHY_ADDR; if (FM1_DTSEC5 == i) - phy_addr = CONFIG_SYS_RGMII2_PHY_ADDR; + phy_addr = CFG_SYS_RGMII2_PHY_ADDR; fm_info_set_phy_address(i, phy_addr); break; case PHY_INTERFACE_MODE_QSGMII: @@ -112,7 +112,7 @@ int board_eth_init(struct bd_info *bis) if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) { for (i = 0; i < 4; i++) { bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i; + phy_addr = CFG_SYS_FM1_QSGMII11_PHY_ADDR + i; phy_int = PHY_INTERFACE_MODE_QSGMII; vsc9953_port_info_set_mdio(i, bus); @@ -124,7 +124,7 @@ int board_eth_init(struct bd_info *bis) if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) { for (i = 4; i < 8; i++) { bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); - phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; + phy_addr = CFG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; phy_int = PHY_INTERFACE_MODE_QSGMII; vsc9953_port_info_set_mdio(i, bus); diff --git a/board/freescale/t104xrdb/law.c b/board/freescale/t104xrdb/law.c index 2f00d80106..a0d6eb5b27 100644 --- a/board/freescale/t104xrdb/law.c +++ b/board/freescale/t104xrdb/law.c @@ -9,19 +9,19 @@ struct law_entry law_table[] = { #ifdef CONFIG_MTD_NOR_FLASH - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif -#ifdef CONFIG_SYS_CPLD_BASE_PHYS - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_CPLD_BASE_PHYS + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c index 66a142b3ad..dd8283f3c6 100644 --- a/board/freescale/t104xrdb/spl.c +++ b/board/freescale/t104xrdb/spl.c @@ -46,7 +46,7 @@ void board_init_f(ulong bootflag) porsr1 = in_be32(&gur->porsr1); pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) | 0x24800000); - out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000), + out_be32((unsigned int *)(CFG_SYS_DCSRBAR + 0x20000), pinctl); } #endif diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index 7d3fd291a0..45ebdd3000 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -62,8 +62,8 @@ int board_early_init_f(void) int board_early_init_r(void) { -#ifdef CONFIG_SYS_FLASH_BASE - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; +#ifdef CFG_SYS_FLASH_BASE + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -84,7 +84,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); #endif diff --git a/board/freescale/t104xrdb/tlb.c b/board/freescale/t104xrdb/tlb.c index 905e4771c9..10be580b81 100644 --- a/board/freescale/t104xrdb/tlb.c +++ b/board/freescale/t104xrdb/tlb.c @@ -8,32 +8,32 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) && \ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) && \ !defined(CONFIG_NXP_ESBC) /* * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the * SRAM is at 0xfffc0000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_256K, 1), @@ -44,8 +44,8 @@ struct fsl_e_tlb_entry tlb_table[] = { * and virtual address is 0xfffc0000 */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_VADDR, - CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_VADDR, + CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_256K, 1), #else @@ -55,13 +55,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -77,27 +77,27 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 4, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 5, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_16M, 1), #endif #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 9, BOOKE_PAGESZ_4M, 1), #endif @@ -111,18 +111,18 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_64K, 1), #endif -#ifdef CONFIG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, +#ifdef CFG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 11, BOOKE_PAGESZ_256K, 1), #endif #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 12, BOOKE_PAGESZ_1G, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE + 0x40000000, + CFG_SYS_DDR_SDRAM_BASE + 0x40000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 13, BOOKE_PAGESZ_1G, 1) #endif diff --git a/board/freescale/t208xqds/law.c b/board/freescale/t208xqds/law.c index f97467e844..3cdd493768 100644 --- a/board/freescale/t208xqds/law.c +++ b/board/freescale/t208xqds/law.c @@ -11,19 +11,19 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif #ifdef QIXIS_BASE_PHYS SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS +#ifdef CFG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 82710cf897..8be55e52e5 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -282,7 +282,7 @@ static void esdhc_adapter_card_ident(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -303,7 +303,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); diff --git a/board/freescale/t208xqds/tlb.c b/board/freescale/t208xqds/tlb.c index f2448e86c0..3d220afc16 100644 --- a/board/freescale/t208xqds/tlb.c +++ b/board/freescale/t208xqds/tlb.c @@ -11,31 +11,31 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) /* * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the * SRAM is at 0xfff00000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) @@ -54,13 +54,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -92,27 +92,27 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 11, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 12, BOOKE_PAGESZ_16M, 1), #endif #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 13, BOOKE_PAGESZ_32M, 1), #endif @@ -143,7 +143,7 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 19, BOOKE_PAGESZ_2G, 1) #endif diff --git a/board/freescale/t208xrdb/cpld.c b/board/freescale/t208xrdb/cpld.c index b9ba62adff..933fa0decc 100644 --- a/board/freescale/t208xrdb/cpld.c +++ b/board/freescale/t208xrdb/cpld.c @@ -11,14 +11,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/t208xrdb/law.c b/board/freescale/t208xrdb/law.c index 3ff4c773d5..53a1369450 100644 --- a/board/freescale/t208xrdb/law.c +++ b/board/freescale/t208xrdb/law.c @@ -11,19 +11,19 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif -#ifdef CONFIG_SYS_CPLD_BASE_PHYS - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_CPLD_BASE_PHYS + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS +#ifdef CFG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index 1c8017b593..04cb313e8c 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -77,7 +77,7 @@ int checkboard(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -96,7 +96,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); diff --git a/board/freescale/t208xrdb/tlb.c b/board/freescale/t208xrdb/tlb.c index 45c27c0812..688a208c62 100644 --- a/board/freescale/t208xrdb/tlb.c +++ b/board/freescale/t208xrdb/tlb.c @@ -11,31 +11,31 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) /* * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the * SRAM is at 0xfff00000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) @@ -54,13 +54,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -92,27 +92,27 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 7, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 11, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 12, BOOKE_PAGESZ_16M, 1), #endif #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 13, BOOKE_PAGESZ_32M, 1), #endif @@ -126,8 +126,8 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif -#ifdef CONFIG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, +#ifdef CFG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), #endif @@ -142,7 +142,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 18, BOOKE_PAGESZ_1M, 1), #endif #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 19, BOOKE_PAGESZ_2G, 1) #endif diff --git a/board/freescale/t4rdb/cpld.c b/board/freescale/t4rdb/cpld.c index d484509bc2..8b1012086e 100644 --- a/board/freescale/t4rdb/cpld.c +++ b/board/freescale/t4rdb/cpld.c @@ -9,7 +9,7 @@ * * The following macros need to be defined: * - * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CFG_SYS_CPLD_BASE - The virtual address of the base of the * CPLD register map * */ @@ -22,14 +22,14 @@ u8 cpld_read(unsigned int reg) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; return in_8(p + reg); } void cpld_write(unsigned int reg, u8 value) { - void *p = (void *)CONFIG_SYS_CPLD_BASE; + void *p = (void *)CFG_SYS_CPLD_BASE; out_8(p + reg, value); } diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c index 438589604f..43eeb884e2 100644 --- a/board/freescale/t4rdb/law.c +++ b/board/freescale/t4rdb/law.c @@ -8,19 +8,19 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif -#ifdef CONFIG_SYS_CPLD_BASE_PHYS - SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CFG_SYS_CPLD_BASE_PHYS + SET_LAW(CFG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS +#ifdef CFG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CFG_SYS_NAND_BASE_PHYS SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index 20ce7523e5..0bd0ba9396 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -54,7 +54,7 @@ int checkboard(void) int board_early_init_r(void) { - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -75,7 +75,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c index c57af3046f..f5af893c2d 100644 --- a/board/freescale/t4rdb/tlb.c +++ b/board/freescale/t4rdb/tlb.c @@ -8,29 +8,29 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), /* TLB 1 */ /* *I*** - Covers boot page */ -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) +#if defined(CONFIG_SYS_RAMBOOT) && defined(CFG_SYS_INIT_L3_ADDR) /* * *I*G - L3SRAM. When L3 is used as 512K SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + SET_TLB_ENTRY(1, CFG_SYS_INIT_L3_ADDR, CFG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_512K, 1), #else @@ -40,13 +40,13 @@ struct fsl_e_tlb_entry tlb_table[] = { #endif /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), @@ -73,28 +73,28 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 6, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ -#ifdef CONFIG_SYS_BMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, +#ifdef CFG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 9, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 10, BOOKE_PAGESZ_16M, 1), #endif -#ifdef CONFIG_SYS_QMAN_MEM_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, +#ifdef CFG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 11, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 12, BOOKE_PAGESZ_16M, 1), #endif #endif -#ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, +#ifdef CFG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 13, BOOKE_PAGESZ_32M, 1), #endif @@ -108,13 +108,13 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif -#ifdef CONFIG_SYS_CPLD_BASE - SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, +#ifdef CFG_SYS_CPLD_BASE + SET_TLB_ENTRY(1, CFG_SYS_CPLD_BASE, CFG_SYS_CPLD_BASE_PHYS, MAS3_SW|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), #endif #if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, 0, 18, BOOKE_PAGESZ_2G, 1) #endif diff --git a/board/gdsys/mpc8308/sdram.c b/board/gdsys/mpc8308/sdram.c index 4889a6a4f3..4fac146353 100644 --- a/board/gdsys/mpc8308/sdram.c +++ b/board/gdsys/mpc8308/sdram.c @@ -40,26 +40,26 @@ static long fixed_sdram(void) out_be32(&im->sysconf.ddrlaw[0].bar, CFG_SYS_SDRAM_BASE & 0xfffff000); out_be32(&im->sysconf.ddrlaw[0].ar, LBLAWAR_EN | (msize_log2 - 1)); - out_be32(&im->sysconf.ddrcdr, CONFIG_SYS_DDRCDR_VALUE); + out_be32(&im->sysconf.ddrcdr, CFG_SYS_DDRCDR_VALUE); out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); - out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); + out_be32(&im->ddr.cs_config[0], CFG_SYS_DDR_CS0_CONFIG); /* Currently we use only one CS, so disable the other bank. */ out_be32(&im->ddr.cs_config[1], 0); - out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL); - out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); + out_be32(&im->ddr.sdram_clk_cntl, CFG_SYS_DDR_SDRAM_CLK_CNTL); + out_be32(&im->ddr.timing_cfg_3, CFG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.timing_cfg_1, CFG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CFG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_0, CFG_SYS_DDR_TIMING_0); - out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); - out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); - out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); + out_be32(&im->ddr.sdram_cfg, CFG_SYS_DDR_SDRAM_CFG); + out_be32(&im->ddr.sdram_cfg2, CFG_SYS_DDR_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CFG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CFG_SYS_DDR_MODE2); - out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); + out_be32(&im->ddr.sdram_interval, CFG_SYS_DDR_INTERVAL); sync(); /* enable DDR controller */ diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 6c5e6fbbcb..f1599306e6 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -82,7 +82,7 @@ int onenand_board_init(struct mtd_info *mtd) { if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) { struct onenand_chip *this = mtd->priv; - this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->base = (void *)CFG_SYS_ONENAND_BASE; return 0; } return 1; diff --git a/board/keymile/common/qrio.c b/board/keymile/common/qrio.c index 5401bddf06..b433f69675 100644 --- a/board/keymile/common/qrio.c +++ b/board/keymile/common/qrio.c @@ -20,7 +20,7 @@ void show_qrio(void) { - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; u16 id_rev = in_be16(qrio_base + ID_REV_OFF); printf("QRIO: id = %u, revision = %u\n", @@ -33,7 +33,7 @@ bool qrio_get_selftest_pin(void) { u8 slftest; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; slftest = in_8(qrio_base + SLFTEST_OFF); @@ -46,7 +46,7 @@ bool qrio_get_pgy_pres_pin(void) { u8 pgy_pres; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; pgy_pres = in_8(qrio_base + BPRTH_OFF); @@ -57,7 +57,7 @@ int qrio_get_gpio(u8 port_off, u8 gpio_nr) { u32 gprt; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; gprt = in_be32(qrio_base + port_off + GPRT_OFF); @@ -68,7 +68,7 @@ void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value) { u32 gprt, mask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; mask = 1U << gpio_nr; @@ -85,7 +85,7 @@ void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value) { u32 direct, mask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; mask = 1U << gpio_nr; @@ -100,7 +100,7 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr) { u32 direct, mask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; mask = 1U << gpio_nr; @@ -113,7 +113,7 @@ void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) { u32 direct, mask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; mask = 1U << gpio_nr; @@ -133,7 +133,7 @@ void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) void qrio_wdmask(u8 bit, bool wden) { u16 wdmask; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; wdmask = in_be16(qrio_base + WDMASK_OFF); @@ -150,7 +150,7 @@ void qrio_wdmask(u8 bit, bool wden) void qrio_prst(u8 bit, bool en, bool wden) { u16 prst; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; qrio_wdmask(bit, wden); @@ -170,7 +170,7 @@ void qrio_prstcfg(u8 bit, u8 mode) { unsigned long prstcfg; u8 i; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; prstcfg = in_be32(qrio_base + PRSTCFG_OFF); @@ -191,7 +191,7 @@ void qrio_prstcfg(u8 bit, u8 mode) void qrio_set_leds(void) { u8 ctrlh; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; /* set UNIT LED to RED and BOOT LED to ON */ ctrlh = in_8(qrio_base + CTRLH_OFF); @@ -205,7 +205,7 @@ void qrio_set_leds(void) void qrio_enable_app_buffer(void) { u8 ctrll; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; /* enable application buffer */ ctrll = in_8(qrio_base + CTRLL_OFF); @@ -219,7 +219,7 @@ void qrio_enable_app_buffer(void) void qrio_cpuwd_flag(bool flag) { u8 reason1; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; reason1 = in_8(qrio_base + REASON1_OFF); if (flag) @@ -246,7 +246,7 @@ void qrio_cpuwd_flag(bool flag) bool qrio_reason_unitrst(void) { u16 reason; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; reason = in_be16(qrio_base + REASON1_OFF); @@ -258,7 +258,7 @@ bool qrio_reason_unitrst(void) void qrio_uprstreq(u8 mode) { u32 rstcfg; - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; rstcfg = in_8(qrio_base + RSTCFG_OFF); @@ -277,7 +277,7 @@ void qrio_uprstreq(u8 mode) ulong early_bootcount_load(void) { - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; u16 id_rev = in_be16(qrio_base + ID_REV_OFF); u8 id = (id_rev >> 8) & 0xff; u8 rev = id_rev & 0xff; @@ -295,7 +295,7 @@ ulong early_bootcount_load(void) void early_bootcount_store(ulong ebootcount) { - void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + void __iomem *qrio_base = (void *)CFG_SYS_QRIO_BASE; u16 id_rev = in_be16(qrio_base + ID_REV_OFF); u8 id = (id_rev >> 8) & 0xff; u8 rev = id_rev & 0xff; diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index ddd8f7a13e..88afc76bbb 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -40,7 +40,7 @@ static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; static int piggy_present(void) { struct km_bec_fpga __iomem *base = - (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; + (struct km_bec_fpga __iomem *)CFG_SYS_KMBEC_FPGA_BASE; return in_8(&base->bprth) & PIGGY_PRESENT; } @@ -53,7 +53,7 @@ int ethernet_present(void) int board_early_init_r(void) { struct km_bec_fpga *base = - (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; + (struct km_bec_fpga *)CFG_SYS_KMBEC_FPGA_BASE; #if defined(CONFIG_ARCH_MPC8360) unsigned short svid; @@ -126,18 +126,18 @@ static int fixed_sdram(void) u32 ddr_size_log2; out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e)); - out_be32(&im->ddr.csbnds[0].csbnds, (CONFIG_SYS_DDR_CS0_BNDS) | 0x7f); - out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG); - out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2); - out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE); - out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2); - out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL); - out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL); + out_be32(&im->ddr.csbnds[0].csbnds, (CFG_SYS_DDR_CS0_BNDS) | 0x7f); + out_be32(&im->ddr.cs_config[0], CFG_SYS_DDR_CS0_CONFIG); + out_be32(&im->ddr.timing_cfg_0, CFG_SYS_DDR_TIMING_0); + out_be32(&im->ddr.timing_cfg_1, CFG_SYS_DDR_TIMING_1); + out_be32(&im->ddr.timing_cfg_2, CFG_SYS_DDR_TIMING_2); + out_be32(&im->ddr.timing_cfg_3, CFG_SYS_DDR_TIMING_3); + out_be32(&im->ddr.sdram_cfg, CFG_SYS_DDR_SDRAM_CFG); + out_be32(&im->ddr.sdram_cfg2, CFG_SYS_DDR_SDRAM_CFG2); + out_be32(&im->ddr.sdram_mode, CFG_SYS_DDR_MODE); + out_be32(&im->ddr.sdram_mode2, CFG_SYS_DDR_MODE2); + out_be32(&im->ddr.sdram_interval, CFG_SYS_DDR_INTERVAL); + out_be32(&im->ddr.sdram_clk_cntl, CFG_SYS_DDR_CLK_CNTL); udelay(200); setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN); @@ -215,7 +215,7 @@ int post_hotkeys_pressed(void) { int testpin = 0; struct km_bec_fpga *base = - (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; + (struct km_bec_fpga *)CFG_SYS_KMBEC_FPGA_BASE; int testpin_reg = in_8(&base->CONFIG_TESTPIN_REG); testpin = (testpin_reg & CONFIG_TESTPIN_MASK) != 0; debug("post_hotkeys_pressed: %d\n", !testpin); diff --git a/board/keymile/kmcent2/kmcent2.c b/board/keymile/kmcent2/kmcent2.c index 6a1711092b..9f68c215f3 100644 --- a/board/keymile/kmcent2/kmcent2.c +++ b/board/keymile/kmcent2/kmcent2.c @@ -44,7 +44,7 @@ int checkboard(void) int board_early_init_f(void) { - struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL}; ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); bool cpuwd_flag = false; @@ -141,7 +141,7 @@ int board_early_init_r(void) { int ret = 0; - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const unsigned int flashbase = CFG_SYS_FLASH_BASE; int flash_esel = find_tlb_idx((void *)flashbase, 1); /* @@ -162,7 +162,7 @@ int board_early_init_r(void) disable_tlb(flash_esel); } - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + set_tlb(1, flashbase, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, flash_esel, BOOKE_PAGESZ_256M, 1); diff --git a/board/keymile/kmcent2/law.c b/board/keymile/kmcent2/law.c index b04a8e20dc..ec3bb8fe80 100644 --- a/board/keymile/kmcent2/law.c +++ b/board/keymile/kmcent2/law.c @@ -10,12 +10,12 @@ #include <asm/fsl_law.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), + SET_LAW(CFG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), + SET_LAW(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), + SET_LAW(CFG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), SET_LAW(CFG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), - SET_LAW(CONFIG_SYS_QRIO_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), + SET_LAW(CFG_SYS_QRIO_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), SET_LAW(SYS_LAWAPP_BASE_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_IFC), /* other application LAW are not used in u-boot */ }; diff --git a/board/keymile/kmcent2/tlb.c b/board/keymile/kmcent2/tlb.c index 0f6dc6063a..41b24e3943 100644 --- a/board/keymile/kmcent2/tlb.c +++ b/board/keymile/kmcent2/tlb.c @@ -11,20 +11,20 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, - CONFIG_SYS_INIT_RAM_ADDR_PHYS, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, + CFG_SYS_INIT_RAM_ADDR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024, + CFG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -35,13 +35,13 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 0, BOOKE_PAGESZ_4K, 1), /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 1, BOOKE_PAGESZ_16M, 1), /* *I*G* - Flash, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE_PHYS, MAS3_SX | MAS3_SR, MAS2_W | MAS2_G, 0, 2, BOOKE_PAGESZ_128M, 1), @@ -56,22 +56,22 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 4, BOOKE_PAGESZ_256K, 1), /* Bman/Qman */ - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE, CFG_SYS_BMAN_MEM_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 5, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_BMAN_MEM_BASE + 0x01000000, + CFG_SYS_BMAN_MEM_PHYS + 0x01000000, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 6, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE, CFG_SYS_QMAN_MEM_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + SET_TLB_ENTRY(1, CFG_SYS_QMAN_MEM_BASE + 0x01000000, + CFG_SYS_QMAN_MEM_PHYS + 0x01000000, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 8, BOOKE_PAGESZ_16M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_DCSRBAR, CFG_SYS_DCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 9, BOOKE_PAGESZ_4M, 1), @@ -80,11 +80,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 10, BOOKE_PAGESZ_64K, 1), /* QRIO */ - SET_TLB_ENTRY(1, CONFIG_SYS_QRIO_BASE, CONFIG_SYS_QRIO_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_QRIO_BASE, CFG_SYS_QRIO_BASE_PHYS, MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 11, BOOKE_PAGESZ_64K, 1), /* MRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_MRAM_BASE, SYS_MRAM_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_MRAM_BASE, SYS_MRAM_BASE_PHYS, MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 12, BOOKE_PAGESZ_128M, 1), /* BFTIC */ @@ -96,7 +96,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * in cpu_init_f, so do not use them here!!. */ /* PAXE */ - SET_TLB_ENTRY(1, CONFIG_SYS_PAXE_BASE, SYS_PAXE_BASE_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_PAXE_BASE, SYS_PAXE_BASE_PHYS, MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 16, BOOKE_PAGESZ_128M, 1) }; diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c index 1a7fa3fc1e..e005ece469 100644 --- a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c +++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c @@ -52,7 +52,7 @@ int board_early_init_f(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR; struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR; - struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + struct fsl_ifc ifc = {(void *)CFG_SYS_IFC_ADDR, (void *)NULL}; /* Disable unused MCK1 */ setbits_be32(&gur->ddrclkdr, 2); diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index fa95886fa3..238b9637ba 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -232,7 +232,7 @@ int board_init(void) gpmc_init(); #if defined(CONFIG_CMD_ONENAND) enable_gpmc_cs_config(gpmc_regs_onenandrx51, &gpmc_cfg->cs[0], - CONFIG_SYS_ONENAND_BASE, GPMC_SIZE_256M); + CFG_SYS_ONENAND_BASE, GPMC_SIZE_256M); #endif /* Enable the clks & power */ per_clocks_enable(); diff --git a/board/samsung/goni/onenand.c b/board/samsung/goni/onenand.c index 9f21795437..c67c107b16 100644 --- a/board/samsung/goni/onenand.c +++ b/board/samsung/goni/onenand.c @@ -14,7 +14,7 @@ int onenand_board_init(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; - this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->base = (void *)CFG_SYS_ONENAND_BASE; this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; this->chip_probe = s5pc110_chip_probe; diff --git a/board/samsung/universal_c210/onenand.c b/board/samsung/universal_c210/onenand.c index 37e911c430..265a2cde4b 100644 --- a/board/samsung/universal_c210/onenand.c +++ b/board/samsung/universal_c210/onenand.c @@ -13,7 +13,7 @@ int onenand_board_init(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; - this->base = (void *)CONFIG_SYS_ONENAND_BASE; + this->base = (void *)CFG_SYS_ONENAND_BASE; this->options |= ONENAND_RUNTIME_BADBLOCK_CHECK; this->chip_probe = s5pc210_chip_probe; diff --git a/board/siemens/smartweb/smartweb.c b/board/siemens/smartweb/smartweb.c index 3d0f7341a3..15044c7d0e 100644 --- a/board/siemens/smartweb/smartweb.c +++ b/board/siemens/smartweb/smartweb.c @@ -246,7 +246,7 @@ void mem_init(void) setting.cr = SDRAM_BASE_CONF; setting.mdr = AT91_SDRAMC_MD_SDRAM; - setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000; + setting.tr = (CFG_SYS_MASTER_CLOCK * 7) / 1000000; /* * I write here directly in this register, because this diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 1eee972d49..ad44a7c0d2 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -168,7 +168,7 @@ void sdramc_configure(unsigned int mask) at91_sdram_hw_init(); setting.cr = SDRAM_BASE_CONF | mask; setting.mdr = AT91_SDRAMC_MD_SDRAM; - setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000; + setting.tr = (CFG_SYS_MASTER_CLOCK * 7) / 1000000; writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC | AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL, diff --git a/board/socrates/law.c b/board/socrates/law.c index 840941b63e..e4427ecff1 100644 --- a/board/socrates/law.c +++ b/board/socrates/law.c @@ -30,12 +30,12 @@ */ struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), - SET_LAW(CONFIG_SYS_LBC_FLASH_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), -#if defined(CONFIG_SYS_FPGA_BASE) - SET_LAW(CONFIG_SYS_FPGA_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), + SET_LAW(CFG_SYS_LBC_FLASH_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), +#if defined(CFG_SYS_FPGA_BASE) + SET_LAW(CFG_SYS_FPGA_BASE, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif - SET_LAW(CONFIG_SYS_LIME_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_SYS_LIME_BASE, LAW_SIZE_64M, LAW_TRGT_IF_LBC), }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c index ad49999dc2..61402a554b 100644 --- a/board/socrates/sdram.c +++ b/board/socrates/sdram.c @@ -34,20 +34,20 @@ phys_size_t fixed_sdram(void) ddr->cs0_config = 0; ddr->sdram_cfg = 0; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONFIG_2; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CONTROL; + ddr->cs0_bnds = CFG_SYS_DDR_CS0_BNDS; + ddr->cs0_config = CFG_SYS_DDR_CS0_CONFIG; + ddr->timing_cfg_0 = CFG_SYS_DDR_TIMING_0; + ddr->timing_cfg_1 = CFG_SYS_DDR_TIMING_1; + ddr->timing_cfg_2 = CFG_SYS_DDR_TIMING_2; + ddr->sdram_mode = CFG_SYS_DDR_MODE; + ddr->sdram_interval = CFG_SYS_DDR_INTERVAL; + ddr->sdram_cfg_2 = CFG_SYS_DDR_CONFIG_2; + ddr->sdram_clk_cntl = CFG_SYS_DDR_CLK_CONTROL; asm ("sync;isync;msync"); udelay(1000); - ddr->sdram_cfg = CONFIG_SYS_DDR_CONFIG; + ddr->sdram_cfg = CFG_SYS_DDR_CONFIG; asm ("sync; isync; msync"); udelay(1000); @@ -62,7 +62,7 @@ phys_size_t fixed_sdram(void) } #endif -#if defined(CONFIG_SYS_DRAM_TEST) +#if defined(CFG_SYS_DRAM_TEST) int testdram(void) { uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index eaba87542e..9c4dd186fc 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -83,7 +83,7 @@ int misc_init_r (void) /* * Check if boot FLASH isn't max size */ - if (gd->bd->bi_flashsize < (0 - CONFIG_SYS_FLASH0)) { + if (gd->bd->bi_flashsize < (0 - CFG_SYS_FLASH0)) { set_lbc_or(0, gd->bd->bi_flashstart | (CONFIG_SYS_OR0_PRELIM & 0x00007fff)); set_lbc_br(0, gd->bd->bi_flashstart | @@ -98,7 +98,7 @@ int misc_init_r (void) /* * Check if only one FLASH bank is available */ - if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { + if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CFG_SYS_FLASH0)) { set_lbc_or(1, 0); set_lbc_br(1, 0); @@ -143,7 +143,7 @@ void local_bus_init (void) sys_info_t sysinfo; uint clkdiv; uint lbc_mhz; - uint lcrr = CONFIG_SYS_LBC_LCRR; + uint lcrr = CFG_SYS_LBC_LCRR; get_sys_info (&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; @@ -204,8 +204,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) /* Fixup FPGA mapping */ val[i++] = 3; /* chip select number */ val[i++] = 0; /* always 0 */ - val[i++] = CONFIG_SYS_FPGA_BASE; - val[i++] = CONFIG_SYS_FPGA_SIZE; + val[i++] = CFG_SYS_FPGA_BASE; + val[i++] = CFG_SYS_FPGA_SIZE; rc = fdt_find_and_setprop(blob, "/localbus", "ranges", val, i * sizeof(u32), 1); diff --git a/board/socrates/tlb.c b/board/socrates/tlb.c index 1ab403d145..631f6c3407 100644 --- a/board/socrates/tlb.c +++ b/board/socrates/tlb.c @@ -14,16 +14,16 @@ struct fsl_e_tlb_entry tlb_table[] = { /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR, CFG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 4 * 1024 , CFG_SYS_INIT_RAM_ADDR + 4 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 8 * 1024 , CFG_SYS_INIT_RAM_ADDR + 8 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + SET_TLB_ENTRY(0, CFG_SYS_INIT_RAM_ADDR + 12 * 1024 , CFG_SYS_INIT_RAM_ADDR + 12 * 1024, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), @@ -33,7 +33,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xfc000000 64M FLASH * Out of reset this entry is only 4K. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE, + SET_TLB_ENTRY(1, CFG_SYS_FLASH_BASE, CFG_SYS_FLASH_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_64M, 1), @@ -53,12 +53,12 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 3, BOOKE_PAGESZ_256M, 1), -#if defined(CONFIG_SYS_FPGA_BASE) +#if defined(CFG_SYS_FPGA_BASE) /* * TLB 4: 1M Non-cacheable, guarded * 0xc0000000 1M FPGA and NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_FPGA_BASE, CONFIG_SYS_FPGA_BASE, + SET_TLB_ENTRY(1, CFG_SYS_FPGA_BASE, CFG_SYS_FPGA_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_1M, 1), #endif @@ -70,7 +70,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * (0xcbfc0000 256K LIME GDC MMIO) * MMIO is relocatable and could be at 0xcbfc0000 */ - SET_TLB_ENTRY(1, CONFIG_SYS_LIME_BASE, CONFIG_SYS_LIME_BASE, + SET_TLB_ENTRY(1, CFG_SYS_LIME_BASE, CFG_SYS_LIME_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 5, BOOKE_PAGESZ_64M, 1), @@ -79,7 +79,7 @@ struct fsl_e_tlb_entry tlb_table[] = { * 0xe000_0000 1M CCSRBAR * 0xe200_0000 16M PCI1 IO */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + SET_TLB_ENTRY(1, CFG_SYS_CCSRBAR, CFG_SYS_CCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_64M, 1), @@ -91,11 +91,11 @@ struct fsl_e_tlb_entry tlb_table[] = { * Make sure the TLB count at the top of this table is correct. * Likely it needs to be increased by two for these entries. */ - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE, CFG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_256M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + SET_TLB_ENTRY(1, CFG_SYS_DDR_SDRAM_BASE + 0x10000000, CFG_SYS_DDR_SDRAM_BASE + 0x10000000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 8, BOOKE_PAGESZ_256M, 1), #endif diff --git a/board/sysam/amcore/amcore.c b/board/sysam/amcore/amcore.c index 5426fc4ffd..429f886771 100644 --- a/board/sysam/amcore/amcore.c +++ b/board/sysam/amcore/amcore.c @@ -77,7 +77,7 @@ int dram_init(void) * DCR * set proper RC as per specification */ - RC = (CONFIG_SYS_CPU_CLK / 1000000) >> 1; + RC = (CFG_SYS_CPU_CLK / 1000000) >> 1; RC = (RC * 15) >> 4; /* 0x8000 is the faster option */ diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 34818736a4..1683f780a3 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -121,7 +121,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) /* adjust memory start address for LPAE */ if (lpae) { start[0] -= CFG_SYS_SDRAM_BASE; - start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; + start[0] += CFG_SYS_LPAE_SDRAM_BASE; } if ((size[0] == 0x80000000) && (ddr3a_size != 0)) { @@ -175,11 +175,11 @@ void ft_board_setup_ex(void *blob, struct bd_info *bd) if (prop1 && prop2) { initrd_start = __be64_to_cpu(*prop1); initrd_start -= CFG_SYS_SDRAM_BASE; - initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_start += CFG_SYS_LPAE_SDRAM_BASE; initrd_start = __cpu_to_be64(initrd_start); initrd_end = __be64_to_cpu(*prop2); initrd_end -= CFG_SYS_SDRAM_BASE; - initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_end += CFG_SYS_LPAE_SDRAM_BASE; initrd_end = __cpu_to_be64(initrd_end); err = fdt_delprop(blob, nodeoffset, @@ -223,7 +223,7 @@ void ft_board_setup_ex(void *blob, struct bd_info *bd) if (size) { *reserve_start -= CFG_SYS_SDRAM_BASE; *reserve_start += - CONFIG_SYS_LPAE_SDRAM_BASE; + CFG_SYS_LPAE_SDRAM_BASE; *reserve_start = __cpu_to_be64(*reserve_start); } else { diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 929668ebaa..09cbd6bf71 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -146,7 +146,7 @@ int board_init(void) gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM; gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ - tca642x_set_inital_state(CONFIG_SYS_I2C_TCA642X_ADDR, tca642x_init); + tca642x_set_inital_state(CFG_SYS_I2C_TCA642X_ADDR, tca642x_init); return 0; } diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c index 9d921032ea..bc7e5c5764 100644 --- a/board/xes/common/fsl_8xxx_misc.c +++ b/board/xes/common/fsl_8xxx_misc.c @@ -13,7 +13,7 @@ */ int board_flash_wp_on(void) { - if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + if (pca953x_get_val(CFG_SYS_I2C_PCA953X_ADDR0) & CONFIG_SYS_PCA953X_NVM_WP) return 1; @@ -30,7 +30,7 @@ uint get_board_derivative(void) #if defined(CONFIG_MPC85xx) volatile ccsr_gur_t *gur = (void *)CFG_SYS_MPC85xx_GUTS_ADDR; #elif defined(CONFIG_MPC86xx) - volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR; + volatile immap_t *immap = (immap_t *)CFG_SYS_CCSRBAR; volatile ccsr_gur_t *gur = &immap->im_gur; #endif diff --git a/boot/Kconfig b/boot/Kconfig index 4a001bcee8..668270cc66 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -654,7 +654,7 @@ config SYS_MONITOR_BASE default TEXT_BASE help The physical start address of boot monitor code (which is the same as - CONFIG_TEXT_BASE when linking) and the same as CONFIG_SYS_FLASH_BASE + CONFIG_TEXT_BASE when linking) and the same as CFG_SYS_FLASH_BASE when booting from flash. config SPL_SYS_MONITOR_BASE diff --git a/boot/image-board.c b/boot/image-board.c index 8813be544b..0fd63291d3 100644 --- a/boot/image-board.c +++ b/boot/image-board.c @@ -161,8 +161,8 @@ phys_size_t env_get_bootm_mapsize(void) return tmp; } -#if defined(CONFIG_SYS_BOOTMAPSZ) - return CONFIG_SYS_BOOTMAPSZ; +#if defined(CFG_SYS_BOOTMAPSZ) + return CFG_SYS_BOOTMAPSZ; #else return env_get_bootm_size(); #endif diff --git a/cmd/date.c b/cmd/date.c index 0e2dfbc4fc..58505e6e1d 100644 --- a/cmd/date.c +++ b/cmd/date.c @@ -51,10 +51,10 @@ static int do_date(struct cmd_tbl *cmdtp, int flag, int argc, } #elif CONFIG_IS_ENABLED(SYS_I2C_LEGACY) old_bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_RTC_BUS_NUM); + i2c_set_bus_num(CFG_SYS_RTC_BUS_NUM); #else old_bus = I2C_GET_BUS(); - I2C_SET_BUS(CONFIG_SYS_RTC_BUS_NUM); + I2C_SET_BUS(CFG_SYS_RTC_BUS_NUM); #endif switch (argc) { @@ -97,19 +97,19 @@ static uint i2c_mm_last_alen; * When multiple buses are present, the list is an array of bus-address * pairs. The following macros take care of this */ -#if defined(CONFIG_SYS_I2C_NOPROBES) +#if defined(CFG_SYS_I2C_NOPROBES) #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) static struct { uchar bus; uchar addr; -} i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; +} i2c_no_probes[] = CFG_SYS_I2C_NOPROBES; #define GET_BUS_NUM i2c_get_bus_num() #define COMPARE_BUS(b,i) (i2c_no_probes[(i)].bus == (b)) #define COMPARE_ADDR(a,i) (i2c_no_probes[(i)].addr == (a)) #define NO_PROBE_ADDR(i) i2c_no_probes[(i)].addr #else /* single bus */ -static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; +static uchar i2c_no_probes[] = CFG_SYS_I2C_NOPROBES; #define GET_BUS_NUM 0 #define COMPARE_BUS(b,i) ((b) == 0) /* Make compiler happy */ #define COMPARE_ADDR(a,i) (i2c_no_probes[(i)] == (a)) @@ -912,7 +912,7 @@ static int do_i2c_probe(struct cmd_tbl *cmdtp, int flag, int argc, int j; int addr = -1; int found = 0; -#if defined(CONFIG_SYS_I2C_NOPROBES) +#if defined(CFG_SYS_I2C_NOPROBES) int k, skip; unsigned int bus = GET_BUS_NUM; #endif /* NOPROBES */ @@ -932,7 +932,7 @@ static int do_i2c_probe(struct cmd_tbl *cmdtp, int flag, int argc, if ((0 <= addr) && (j != addr)) continue; -#if defined(CONFIG_SYS_I2C_NOPROBES) +#if defined(CFG_SYS_I2C_NOPROBES) skip = 0; for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) { if (COMPARE_BUS(bus, k) && COMPARE_ADDR(j, k)) { @@ -955,7 +955,7 @@ static int do_i2c_probe(struct cmd_tbl *cmdtp, int flag, int argc, } putc ('\n'); -#if defined(CONFIG_SYS_I2C_NOPROBES) +#if defined(CFG_SYS_I2C_NOPROBES) puts ("Excluded chip addresses:"); for (k = 0; k < ARRAY_SIZE(i2c_no_probes); k++) { if (COMPARE_BUS(bus,k)) @@ -1702,7 +1702,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc, #ifndef CONFIG_SYS_I2C_DIRECT_BUS int j; - for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + for (j = 0; j < CFG_SYS_I2C_MAX_HOPS; j++) { if (i2c_bus[i].next_hop[j].chip == 0) break; printf("->%s@0x%2x:%d", @@ -1737,7 +1737,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc, printf("Bus %d:\t%s", i, I2C_ADAP_NR(i)->name); #ifndef CONFIG_SYS_I2C_DIRECT_BUS int j; - for (j = 0; j < CONFIG_SYS_I2C_MAX_HOPS; j++) { + for (j = 0; j < CFG_SYS_I2C_MAX_HOPS; j++) { if (i2c_bus[i].next_hop[j].chip == 0) break; printf("->%s@0x%2x:%d", diff --git a/common/board_f.c b/common/board_f.c index aab1130763..e027248db5 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -900,9 +900,9 @@ static const init_fnc_t init_sequence_f[] = { post_init_f, #endif INIT_FUNC_WATCHDOG_RESET -#if defined(CONFIG_SYS_DRAM_TEST) +#if defined(CFG_SYS_DRAM_TEST) testdram, -#endif /* CONFIG_SYS_DRAM_TEST */ +#endif /* CFG_SYS_DRAM_TEST */ INIT_FUNC_WATCHDOG_RESET #ifdef CONFIG_POST diff --git a/common/board_r.c b/common/board_r.c index f7fb7df54a..347bb7f7c0 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -346,7 +346,7 @@ static int initr_flash(void) * NOTE: Maybe we should add some schedule()? XXX */ if (env_get_yesno("flashchecksum") == 1) { - const uchar *flash_base = (const uchar *)CONFIG_SYS_FLASH_BASE; + const uchar *flash_base = (const uchar *)CFG_SYS_FLASH_BASE; printf(" CRC: %08X", crc32(0, flash_base, @@ -356,8 +356,8 @@ static int initr_flash(void) putc('\n'); /* update start of FLASH memory */ -#ifdef CONFIG_SYS_FLASH_BASE - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; +#ifdef CFG_SYS_FLASH_BASE + bd->bi_flashstart = CFG_SYS_FLASH_BASE; #endif /* size of FLASH memory (final value) */ bd->bi_flashsize = flash_size; @@ -370,7 +370,7 @@ static int initr_flash(void) #if defined(CONFIG_OXC) || defined(CONFIG_RMU) /* flash mapped at end of memory map */ bd->bi_flashoffset = CONFIG_TEXT_BASE + flash_size; -#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE +#elif CONFIG_SYS_MONITOR_BASE == CFG_SYS_FLASH_BASE bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */ #endif return 0; diff --git a/common/spl/Kconfig.nxp b/common/spl/Kconfig.nxp index 8da85539af..fc696cf0ce 100644 --- a/common/spl/Kconfig.nxp +++ b/common/spl/Kconfig.nxp @@ -26,7 +26,7 @@ config SPL_SYS_CCSR_DO_NOT_RELOCATE bool "Ensures that CCSR is not relocated" depends on PPC help - If this is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a + If this is defined, then CFG_SYS_CCSRBAR_PHYS will be forced to a value that ensures that CCSR is not relocated. config TPL_SYS_CCSR_DO_NOT_RELOCATE @@ -59,7 +59,7 @@ config SPL_RELOC_TEXT_BASE config SPL_RELOC_STACK hex "Address of the start of the stack SPL will use after relocation." help - If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting + If unspecified, this is equal to CFG_SYS_SPL_MALLOC_START. Starting address of the malloc pool used in SPL. When this option is set the full malloc is used in SPL and it is set up by spl_init() and before that, the simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. diff --git a/common/spl/spl.c b/common/spl/spl.c index 22d2a0621e..1d2e8fda72 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -43,8 +43,8 @@ DECLARE_GLOBAL_DATA_PTR; DECLARE_BINMAN_MAGIC_SYM; -#ifndef CONFIG_SYS_UBOOT_START -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#ifndef CFG_SYS_UBOOT_START +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE #endif u32 *boot_params_ptr = NULL; @@ -250,7 +250,7 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image) spl_image->entry_point = u_boot_pos; spl_image->load_addr = u_boot_pos; } else { - spl_image->entry_point = CONFIG_SYS_UBOOT_START; + spl_image->entry_point = CFG_SYS_UBOOT_START; spl_image->load_addr = CONFIG_TEXT_BASE; } spl_image->os = IH_OS_U_BOOT; diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index c1ed31e367..08da7fed88 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -828,7 +828,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, } /* - * If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's + * If a platform does not provide CFG_SYS_UBOOT_START, U-Boot's * Makefile will set it to 0 and it will end up as the entry point * here. What it actually means is: use the load address. */ diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index eaa95fb9b5..1ef5e41262 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -20,7 +20,7 @@ static ulong spl_nor_load_read(struct spl_load_info *load, ulong sector, unsigned long __weak spl_nor_get_uboot_base(void) { - return CONFIG_SYS_UBOOT_BASE; + return CFG_SYS_UBOOT_BASE; } static int spl_nor_load_image(struct spl_image_info *spl_image, diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index da6742416e..2aff025f76 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -31,7 +31,7 @@ static int spi_load_image_os(struct spl_image_info *spl_image, int err; /* Read for a header, parse or error out. */ - spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, sizeof(*header), + spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS, sizeof(*header), (void *)header); if (image_get_magic(header) != IH_MAGIC) @@ -41,12 +41,12 @@ static int spi_load_image_os(struct spl_image_info *spl_image, if (err) return err; - spi_flash_read(flash, CONFIG_SYS_SPI_KERNEL_OFFS, + spi_flash_read(flash, CFG_SYS_SPI_KERNEL_OFFS, spl_image->size, (void *)spl_image->load_addr); /* Read device tree. */ - spi_flash_read(flash, CONFIG_SYS_SPI_ARGS_OFFS, - CONFIG_SYS_SPI_ARGS_SIZE, + spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, + CFG_SYS_SPI_ARGS_SIZE, (void *)CONFIG_SYS_SPL_ARGS_ADDR); return 0; diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c index fb804f0208..bcac25cd02 100644 --- a/common/spl/spl_ubi.c +++ b/common/spl/spl_ubi.c @@ -31,7 +31,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image, #ifdef CONFIG_SPL_ONENAND_SUPPORT case BOOT_DEVICE_ONENAND: info.read = onenand_spl_read_block; - info.peb_size = CONFIG_SYS_ONENAND_BLOCK_SIZE; + info.peb_size = CFG_SYS_ONENAND_BLOCK_SIZE; break; #endif default: diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c index 1258d85e63..77c23ba059 100644 --- a/common/spl/spl_xip.c +++ b/common/spl/spl_xip.c @@ -25,6 +25,6 @@ static int spl_xip(struct spl_image_info *spl_image, } #endif return(spl_parse_image_header(spl_image, bootdev, - (const struct legacy_img_hdr *)CONFIG_SYS_UBOOT_BASE)); + (const struct legacy_img_hdr *)CFG_SYS_UBOOT_BASE)); } SPL_LOAD_IMAGE_METHOD("XIP", 0, BOOT_DEVICE_XIP, spl_xip); diff --git a/doc/README.atmel_mci b/doc/README.atmel_mci index 00e64ba0c7..0b6d2c53db 100644 --- a/doc/README.atmel_mci +++ b/doc/README.atmel_mci @@ -60,7 +60,7 @@ int board_mmc_init(struct bd_info *bd) /* this is a weak define that we are overriding */ int board_mmc_getcd(struct mmc *mmc) { - return !at91_get_gpio_value(CONFIG_SYS_MMC_CD_PIN); + return !at91_get_gpio_value(CFG_SYS_MMC_CD_PIN); } #endif @@ -70,5 +70,5 @@ and the board definition files needs: /* SD/MMC card */ #define CONFIG_GENERIC_ATMEL_MCI 1 #define CONFIG_ATMEL_MCI_PORTB 1 /* Atmel XE-EK uses port B */ -#define CONFIG_SYS_MMC_CD_PIN AT91_PIN_PC9 +#define CFG_SYS_MMC_CD_PIN AT91_PIN_PC9 #define CONFIG_CMD_MMC 1 diff --git a/doc/README.cfi b/doc/README.cfi index ad52850818..3818574702 100644 --- a/doc/README.cfi +++ b/doc/README.cfi @@ -35,12 +35,12 @@ In addition, the t3corp board defines the routine thusly: void flash_cmd_reset(flash_info_t *info) { /* - * FLASH at address CONFIG_SYS_FLASH_BASE is a Spansion chip and + * FLASH at address CFG_SYS_FLASH_BASE is a Spansion chip and * needs the Spansion type reset commands. The other flash chip * is located behind a FPGA (Xilinx DS617) and needs the Intel type * reset command. */ - if (info->start[0] == CONFIG_SYS_FLASH_BASE) + if (info->start[0] == CFG_SYS_FLASH_BASE) flash_write_cmd(info, 0, 0, AMD_CMD_RESET); else flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); diff --git a/doc/README.davinci b/doc/README.davinci index 607531af2a..326efa0a2d 100644 --- a/doc/README.davinci +++ b/doc/README.davinci @@ -75,7 +75,7 @@ http://www.ti.com/tool/TMDXLCDK138 Davinci special defines ======================= -CONFIG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode +CFG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode need a "NOR Boot Configuration Word" stored in the NOR Flash. This define adds this. More Info about this, see: diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index 82fea6201d..767614cbc6 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -11,7 +11,7 @@ Configuration options CONFIG_USB_OHCI_NEW: enable the new OHCI driver - CONFIG_SYS_USB_OHCI_REGS_BASE: defines the base address of the OHCI + CFG_SYS_USB_OHCI_REGS_BASE: defines the base address of the OHCI registers CONFIG_SYS_USB_OHCI_SLOT_NAME: slot name diff --git a/doc/README.mpc85xx b/doc/README.mpc85xx index 3c6ebbdb0e..bafffe6dc5 100644 --- a/doc/README.mpc85xx +++ b/doc/README.mpc85xx @@ -59,13 +59,13 @@ A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot 3) TLB entry for the stack during AS1 Location : Lable "create_init_ram_area" TLB Entry : 14 - EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR + EPN -->RPN : CFG_SYS_INIT_RAM_ADDR --> CFG_SYS_INIT_RAM_ADDR Properties : 16K, AS1, IPROT 4) TLB entry for CCSRBAR during AS1 execution Location : cpu_init_early_f TLB Entry : 13 - EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR + EPN -->RPN : CFG_SYS_CCSRBAR --> CFG_SYS_CCSRBAR Properties : 1M, AS1, I, G 5) Invalidate unproctected TLB Entries @@ -84,7 +84,7 @@ A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot 8) Update Flash's TLB entry Location : Board_init_r TLB entry : Search from TLB entries - EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS + EPN -->RPN : CFG_SYS_FLASH_BASE --> CFG_SYS_FLASH_BASE_PHYS Properties : Board specific size, AS0, I, G, IPROT @@ -94,7 +94,7 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot Location : Label "_start" TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB #if defined(CONFIG_NXP_ESBC) - EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW + EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CFG_SYS_PBI_FLASH_WINDOW Properties : 1M, AS1, I, G, IPROT #else EPN -->RPN : CONFIG_SYS_MONITOR_BASE & 0xffc00000 --> 0xffc00000 @@ -105,7 +105,7 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot Location : Label "create_init_ram_area" TLB Entry : 15 #if defined(CONFIG_NXP_ESBC) - EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW + EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CFG_SYS_PBI_FLASH_WINDOW Properties : 1M, AS1, I, G, IPROT #else EPN -->RPN : CONFIG_SYS_MONITOR_BASE & 0xffc00000 --> 0xffc00000 @@ -115,13 +115,13 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot 3) TLB entry for the stack during AS1 Location : Lable "create_init_ram_area" TLB Entry : 14 - EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR + EPN -->RPN : CFG_SYS_INIT_RAM_ADDR --> CFG_SYS_INIT_RAM_ADDR Properties : 16K, AS1, IPROT 4) TLB entry for CCSRBAR during AS1 execution Location : cpu_init_early_f TLB Entry : 13 - EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR + EPN -->RPN : CFG_SYS_CCSRBAR --> CFG_SYS_CCSRBAR Properties : 1M, AS1, I, G 5) TLB entry for Errata workaround CONFIG_SYS_FSL_ERRATUM_IFC_A003399 @@ -162,5 +162,5 @@ B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot 12) Update Flash's TLB entry Location : Board_init_r TLB entry : Search from TLB entries - EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS + EPN -->RPN : CFG_SYS_FLASH_BASE --> CFG_SYS_FLASH_BASE_PHYS Properties : Board specific size, AS0, I, G, IPROT diff --git a/doc/README.nand b/doc/README.nand index a3c3ab4b95..3765751253 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -134,7 +134,7 @@ Configuration Options: chip.IO_ADDR_R = ...; chip.IO_ADDR_W = ...; - if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_CHIPS, NULL)) + if (nand_scan_ident(mtd, CFG_SYS_MAX_NAND_CHIPS, NULL)) error out /* diff --git a/doc/README.serial_multi b/doc/README.serial_multi index c9049fd01d..0446fe9593 100644 --- a/doc/README.serial_multi +++ b/doc/README.serial_multi @@ -35,7 +35,7 @@ just after switching the console: setenv sout serial_scc; setenv baudrate 38400 After that press 'enter' at the SCC console. Note that baudrates <38400 -are not allowed on LWMON with watchdog enabled (see CONFIG_SYS_BAUDRATE_TABLE in +are not allowed on LWMON with watchdog enabled (see CFG_SYS_BAUDRATE_TABLE in include/configs/lwmon.h). diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst index 584503eb12..770327fea2 100644 --- a/doc/arch/m68k.rst +++ b/doc/arch/m68k.rst @@ -112,16 +112,16 @@ CONFIG_M5272: Other options, generally set inside include/configs/<boardname>.h, they may apply to one or more cpu for the ColdFire family: -CONFIG_SYS_MBAR: +CFG_SYS_MBAR: defines the base address of the MCF5272 configuration registers -CONFIG_SYS_SCR: +CFG_SYS_SCR: defines the contents of the System Configuration Register -CONFIG_SYS_SPR: +CFG_SYS_SPR: defines the contents of the System Protection Register -CONFIG_SYS_MFD: +CFG_SYS_MFD: defines the PLL Multiplication Factor Divider (see table 9-4 of MCF user manual) -CONFIG_SYS_RFD: +CFG_SYS_RFD: defines the PLL Reduce Frequency Devider (see table 9-4 of MCF user manual) CONFIG_SYS_CSx_BASE: @@ -136,9 +136,9 @@ CONFIG_SYS_CSx_RO: if set to 0 chip select x is read/write else chip select is read only CONFIG_SYS_CSx_WS: defines the number of wait states of chip select x -CONFIG_SYS_CACHE_ICACR: +CFG_SYS_CACHE_ICACR: cache-related registers config -CONFIG_SYS_CACHE_DCACR: +CFG_SYS_CACHE_DCACR: cache-related registers config CONFIG_SYS_CACHE_ACRX: cache-related registers config @@ -162,7 +162,7 @@ CFG_SYS_SDRAM_EMOD: these options are used. CONFIG_MCFUART: defines enabling of ColdFire UART driver -CONFIG_SYS_UART_PORT: +CFG_SYS_UART_PORT: defines the UART port to be used (only a single UART can be actually enabled) -CONFIG_SYS_SBFHDR_SIZE: +CFG_SYS_SBFHDR_SIZE: size of the prepended SBF header, if any diff --git a/doc/develop/driver-model/migration.rst b/doc/develop/driver-model/migration.rst index 43665de64f..fe1ae210de 100644 --- a/doc/develop/driver-model/migration.rst +++ b/doc/develop/driver-model/migration.rst @@ -99,7 +99,7 @@ The I2C subsystem has supported the driver model since early 2015. Maintainers should submit patches switching over to using CONFIG_DM_I2C and other base driver model options in time for inclusion in the 2021.10 release. -CONFIG_SYS_TIMER_RATE and CONFIG_SYS_TIMER_COUNTER +CFG_SYS_TIMER_RATE and CFG_SYS_TIMER_COUNTER -------------------------------------------------- Deadline: 2023.01 diff --git a/doc/device-tree-bindings/video/exynos-dp.txt b/doc/device-tree-bindings/video/exynos-dp.txt index 464a85302e..273d8fc796 100644 --- a/doc/device-tree-bindings/video/exynos-dp.txt +++ b/doc/device-tree-bindings/video/exynos-dp.txt @@ -30,9 +30,9 @@ Optional properties: 8(WHITE_GRAY_BALCKBAR_64),9(MOBILE_WHITEBAR_32), 10(MOBILE_WHITEBAR_64) samsung,h-sync-polarity: Horizontal Sync polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,v-sync-polarity: Vertical Sync polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,interlaced: Progressive if 0, else Interlaced samsung,color-space: input video data format COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2 diff --git a/doc/device-tree-bindings/video/exynos-fb.txt b/doc/device-tree-bindings/video/exynos-fb.txt index b022f6163f..bff0cecfcf 100644 --- a/doc/device-tree-bindings/video/exynos-fb.txt +++ b/doc/device-tree-bindings/video/exynos-fb.txt @@ -23,15 +23,15 @@ Board(panel specific): samsung,vl-height: Height of display area in mm samsung,vl-clkp: Clock polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,vl-oep: Output Enable polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,vl-hsp: Horizontal Sync polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,vl-vsp: Vertical Sync polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,vl-dp: Data polarity - CONFIG_SYS_LOW if defined, else CONFIG_SYS_HIGH + CFG_SYS_LOW if defined, else CONFIG_SYS_HIGH samsung,vl-cmd-allow-len: Wait end of frame samsung,winid: Window number on which data is to be displayed diff --git a/doc/imx/common/imx5.txt b/doc/imx/common/imx5.txt index ea0e144ced..6c8c2e594f 100644 --- a/doc/imx/common/imx5.txt +++ b/doc/imx/common/imx5.txt @@ -16,7 +16,7 @@ i.MX5x SoCs. of frequency deviation), avoiding system failure, or at least decreasing the likelihood of system failure. -1.2 CONFIG_SYS_MAIN_PWR_ON: Trigger MAIN_PWR_ON upon startup. +1.2 CFG_SYS_MAIN_PWR_ON: Trigger MAIN_PWR_ON upon startup. This option should be enabled for boards having a SYS_ON_OFF_CTL signal connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the reference designs. diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst index 15897f63dd..83f210d2d0 100644 --- a/doc/usage/environment.rst +++ b/doc/usage/environment.rst @@ -162,7 +162,7 @@ bootm_low for use by the bootm command. See also "bootm_size" environment variable. Address defined by "bootm_low" is also the base of the initial memory mapping for the Linux - kernel -- see the description of CONFIG_SYS_BOOTMAPSZ and + kernel -- see the description of CFG_SYS_BOOTMAPSZ and bootm_mapsize. bootm_mapsize @@ -170,7 +170,7 @@ bootm_mapsize This variable is given as a hexadecimal number and it defines the size of the memory region starting at base address bootm_low that is accessible by the Linux kernel - during early boot. If unset, CONFIG_SYS_BOOTMAPSZ is used + during early boot. If unset, CFG_SYS_BOOTMAPSZ is used as the default value if it is defined, and bootm_size is used otherwise. @@ -228,7 +228,7 @@ initrd_high is usually what you want since it allows for maximum initrd size. If for some reason you want to make sure that the initrd image is loaded below the - CONFIG_SYS_BOOTMAPSZ limit, you can set this environment + CFG_SYS_BOOTMAPSZ limit, you can set this environment variable to a value of "no" or "off" or "0". Alternatively, you can set it to a maximum upper address to use (U-Boot will still check that it diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 8d6424c9da..570252d186 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -83,7 +83,7 @@ config BOOTCOUNT_I2C bool "Boot counter on I2C device" help Enable support for the bootcounter on an i2c (like RTC) device. - CONFIG_SYS_I2C_RTC_ADDR = i2c chip address + CFG_SYS_I2C_RTC_ADDR = i2c chip address CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for the bootcounter. diff --git a/drivers/bootcount/bootcount_i2c.c b/drivers/bootcount/bootcount_i2c.c index 496741d63f..b3ac67ea35 100644 --- a/drivers/bootcount/bootcount_i2c.c +++ b/drivers/bootcount/bootcount_i2c.c @@ -17,7 +17,7 @@ void bootcount_store(ulong a) buf[0] = BC_MAGIC; buf[1] = (a & 0xff); - ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, + ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, CONFIG_BOOTCOUNT_ALEN, buf, 2); if (ret != 0) puts("Error writing bootcount\n"); @@ -28,7 +28,7 @@ ulong bootcount_load(void) unsigned char buf[3]; int ret; - ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, + ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, CONFIG_BOOTCOUNT_ALEN, buf, 2); if (ret != 0) { puts("Error loading bootcount\n"); diff --git a/drivers/clk/at91/compat.c b/drivers/clk/at91/compat.c index b2bfb529cc..2fdc2fbd55 100644 --- a/drivers/clk/at91/compat.c +++ b/drivers/clk/at91/compat.c @@ -150,7 +150,7 @@ static int at91_slow_clk_enable(struct clk *clk) static ulong at91_slow_clk_get_rate(struct clk *clk) { - return CONFIG_SYS_AT91_SLOW_CLOCK; + return CFG_SYS_AT91_SLOW_CLOCK; } static struct clk_ops at91_slow_clk_ops = { diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index b79e99b63d..8fde77c23e 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -14,7 +14,7 @@ config SPL_DM help Enable driver model in SPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + full malloc() enabled by CFG_SYS_SPL_MALLOC_START, consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. In that case you must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses @@ -27,7 +27,7 @@ config TPL_DM help Enable driver model in TPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + full malloc() enabled by CFG_SYS_SPL_MALLOC_START, consider using CONFIG_TPL_SYS_MALLOC_SIMPLE. In that case you must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses @@ -42,7 +42,7 @@ config VPL_DM help Enable driver model in VPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + full malloc() enabled by CFG_SYS_SPL_MALLOC_START, consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. config DM_WARN diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index 4975dbb821..cd332718b6 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -22,7 +22,7 @@ /* * CFG_SYS_FSL_DDR_SDRAM_BASE_PHY is the physical address from the view - * of DDR controllers. It is the same as CONFIG_SYS_DDR_SDRAM_BASE for + * of DDR controllers. It is the same as CFG_SYS_DDR_SDRAM_BASE for * all Power SoCs. But it could be different for ARM SoCs. For example, * fsl_lsch3 has a mapping mechanism to map DDR memory to ranges (in order) of * 0x00_8000_0000 ~ 0x00_ffff_ffff @@ -32,7 +32,7 @@ #ifdef CONFIG_MPC83xx #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY CFG_SYS_SDRAM_BASE #else -#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY CFG_SYS_DDR_SDRAM_BASE #endif #endif diff --git a/drivers/fpga/ACEX1K.c b/drivers/fpga/ACEX1K.c index a1ff47035b..ca49ee40a7 100644 --- a/drivers/fpga/ACEX1K.c +++ b/drivers/fpga/ACEX1K.c @@ -24,8 +24,8 @@ #define CONFIG_FPGA_DELAY() #endif -#ifndef CONFIG_SYS_FPGA_WAIT -#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10 /* 100 ms */ +#ifndef CFG_SYS_FPGA_WAIT +#define CFG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10 /* 100 ms */ #endif static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize); @@ -138,7 +138,7 @@ static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) ts = get_timer (0); /* get current time */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for STATUS to go high.\n"); (*fn->abort) (cookie); return FPGA_FAIL; diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index f264ff8c0e..3eed461e1e 100644 --- a/drivers/fpga/cyclon2.c +++ b/drivers/fpga/cyclon2.c @@ -22,8 +22,8 @@ #define CONFIG_FPGA_DELAY() #endif -#ifndef CONFIG_SYS_FPGA_WAIT -#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ / 10 /* 100 ms */ +#ifndef CFG_SYS_FPGA_WAIT +#define CFG_SYS_FPGA_WAIT CONFIG_SYS_HZ / 10 /* 100 ms */ #endif static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize); @@ -130,7 +130,7 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) ts = get_timer(0); /* get current time */ do { CONFIG_FPGA_DELAY(); - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts("** Timeout waiting for STATUS to go high.\n"); (*fn->abort) (cookie); diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c index f72dfdec94..57a4532f73 100644 --- a/drivers/fpga/spartan2.c +++ b/drivers/fpga/spartan2.c @@ -21,8 +21,8 @@ #define CONFIG_FPGA_DELAY() #endif -#ifndef CONFIG_SYS_FPGA_WAIT -#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ +#ifndef CFG_SYS_FPGA_WAIT +#define CFG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ #endif static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize); @@ -149,7 +149,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Now wait for INIT and BUSY to go high */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ return FPGA_FAIL; @@ -182,7 +182,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) CONFIG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for BUSY to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ return FPGA_FAIL; @@ -214,7 +214,7 @@ static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) CONFIG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ ret_val = FPGA_FAIL; @@ -333,7 +333,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) ts = get_timer (0); /* get current time */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); return FPGA_FAIL; } @@ -347,7 +347,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Now wait for INIT to go high */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); return FPGA_FAIL; } @@ -404,7 +404,7 @@ static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) putc ('*'); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); ret_val = FPGA_FAIL; break; diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index b7a063a95f..fdec89bb81 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -26,8 +26,8 @@ #define CONFIG_FPGA_DELAY() #endif -#ifndef CONFIG_SYS_FPGA_WAIT -#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ +#ifndef CFG_SYS_FPGA_WAIT +#define CFG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ #endif static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize); @@ -154,7 +154,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Now wait for INIT and BUSY to go high */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ return FPGA_FAIL; @@ -187,7 +187,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) CONFIG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for BUSY to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ return FPGA_FAIL; @@ -221,7 +221,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) CONFIG_FPGA_DELAY (); (*fn->clk) (true, true, cookie); /* Assert the clock pin */ - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); (*fn->abort) (cookie); /* abort the burn */ ret_val = FPGA_FAIL; @@ -340,7 +340,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) ts = get_timer (0); /* get current time */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to start.\n"); if (*fn->abort) (*fn->abort) (cookie); @@ -356,7 +356,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) /* Now wait for INIT to go high */ do { CONFIG_FPGA_DELAY (); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for INIT to clear.\n"); if (*fn->abort) (*fn->abort) (cookie); @@ -423,7 +423,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) putc ('*'); - if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ + if (get_timer (ts) > CFG_SYS_FPGA_WAIT) { /* check the time */ puts ("** Timeout waiting for DONE to clear.\n"); ret_val = FPGA_FAIL; break; diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index 0d536f0d04..8871deaea6 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -49,8 +49,8 @@ * which yields 11.44 mS. So let's make it bigger in order to handle * an XC2V1000, if anyone can ever get ahold of one. */ -#ifndef CONFIG_SYS_FPGA_WAIT_INIT -#define CONFIG_SYS_FPGA_WAIT_INIT CONFIG_SYS_HZ / 2 /* 500 ms */ +#ifndef CFG_SYS_FPGA_WAIT_INIT +#define CFG_SYS_FPGA_WAIT_INIT CONFIG_SYS_HZ / 2 /* 500 ms */ #endif /* @@ -58,15 +58,15 @@ * This is normally not necessary since for most reasonable configuration * clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary. */ -#ifndef CONFIG_SYS_FPGA_WAIT_BUSY -#define CONFIG_SYS_FPGA_WAIT_BUSY CONFIG_SYS_HZ / 200 /* 5 ms*/ +#ifndef CFG_SYS_FPGA_WAIT_BUSY +#define CFG_SYS_FPGA_WAIT_BUSY CONFIG_SYS_HZ / 200 /* 5 ms*/ #endif /* Default timeout for waiting for FPGA to enter operational mode after * configuration data has been written. */ -#ifndef CONFIG_SYS_FPGA_WAIT_CONFIG -#define CONFIG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ / 5 /* 200 ms */ +#ifndef CFG_SYS_FPGA_WAIT_CONFIG +#define CFG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ / 5 /* 200 ms */ #endif static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize); @@ -190,9 +190,9 @@ static int virtex2_slave_pre(xilinx_virtex2_slave_fns *fn, int cookie) udelay(10); ts = get_timer(0); do { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT_INIT) { printf("%s:%d: ** Timeout after %d ticks waiting for INIT to assert.\n", - __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_INIT); + __func__, __LINE__, CFG_SYS_FPGA_WAIT_INIT); (*fn->abort)(cookie); return FPGA_FAIL; } @@ -209,9 +209,9 @@ static int virtex2_slave_pre(xilinx_virtex2_slave_fns *fn, int cookie) ts = get_timer(0); do { CONFIG_FPGA_DELAY(); - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_INIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT_INIT) { printf("%s:%d: ** Timeout after %d ticks waiting for INIT to deassert.\n", - __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_INIT); + __func__, __LINE__, CFG_SYS_FPGA_WAIT_INIT); (*fn->abort)(cookie); return FPGA_FAIL; } @@ -260,9 +260,9 @@ static int virtex2_slave_post(xilinx_virtex2_slave_fns *fn, break; } - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT_CONFIG) { printf("%s:%d: ** Timeout after %d ticks waiting for DONE to assert and INIT to deassert\n", - __func__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG); + __func__, __LINE__, CFG_SYS_FPGA_WAIT_CONFIG); (*fn->abort)(cookie); ret_val = FPGA_FAIL; break; @@ -350,10 +350,10 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) #ifdef CONFIG_SYS_FPGA_CHECK_BUSY ts = get_timer(0); while ((*fn->busy)(cookie)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT_BUSY) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT_BUSY) { printf("%s:%d: ** Timeout after %d ticks waiting for BUSY to deassert\n", __func__, __LINE__, - CONFIG_SYS_FPGA_WAIT_BUSY); + CFG_SYS_FPGA_WAIT_BUSY); (*fn->abort)(cookie); return FPGA_FAIL; } diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 0c83df46da..53dd780a6c 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -36,8 +36,8 @@ #define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002 #define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001 -#ifndef CONFIG_SYS_FPGA_WAIT -#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ +#ifndef CFG_SYS_FPGA_WAIT +#define CFG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ #endif #ifndef CONFIG_SYS_FPGA_PROG_TIME @@ -232,7 +232,7 @@ static int zynq_dma_xfer_init(bitstream_type bstype) /* Polling the PCAP_INIT status for Reset */ ts = get_timer(0); while (readl(&devcfg_base->status) & DEVCFG_STATUS_PCFG_INIT) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { printf("%s: Timeout wait for INIT to clear\n", __func__); return FPGA_FAIL; @@ -246,7 +246,7 @@ static int zynq_dma_xfer_init(bitstream_type bstype) ts = get_timer(0); while (!(readl(&devcfg_base->status) & DEVCFG_STATUS_PCFG_INIT)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { printf("%s: Timeout wait for INIT to set\n", __func__); return FPGA_FAIL; @@ -400,7 +400,7 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize, /* Check FPGA configuration completion */ ts = get_timer(0); while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { printf("%s: Timeout wait for FPGA to config\n", __func__); return FPGA_FAIL; @@ -484,7 +484,7 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, /* Check FPGA configuration completion */ ts = get_timer(0); while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { printf("%s: Timeout wait for FPGA to config\n", __func__); return FPGA_FAIL; @@ -561,7 +561,7 @@ int zynq_decrypt_load(u32 srcaddr, u32 srclen, u32 dstaddr, u32 dstlen, /* Check FPGA configuration completion */ ts = get_timer(0); while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { - if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + if (get_timer(ts) > CFG_SYS_FPGA_WAIT) { printf("%s: Timeout wait for FPGA to config\n", __func__); return FPGA_FAIL; diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 2fd2996798..b5ed35256e 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -14,8 +14,8 @@ #include <pca953x.h> /* Default to an address that hopefully won't corrupt other i2c devices */ -#ifndef CONFIG_SYS_I2C_PCA953X_ADDR -#define CONFIG_SYS_I2C_PCA953X_ADDR (~0) +#ifndef CFG_SYS_I2C_PCA953X_ADDR +#define CFG_SYS_I2C_PCA953X_ADDR (~0) #endif enum { @@ -26,14 +26,14 @@ enum { PCA953X_CMD_INVERT, }; -#ifdef CONFIG_SYS_I2C_PCA953X_WIDTH +#ifdef CFG_SYS_I2C_PCA953X_WIDTH struct pca953x_chip_ngpio { uint8_t chip; uint8_t ngpio; }; static struct pca953x_chip_ngpio pca953x_chip_ngpios[] = - CONFIG_SYS_I2C_PCA953X_WIDTH; + CFG_SYS_I2C_PCA953X_WIDTH; /* * Determine the number of GPIO pins supported. If we don't know we assume @@ -204,7 +204,7 @@ static struct cmd_tbl cmd_pca953x[] = { static int do_pca953x(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR; + static uint8_t chip = CFG_SYS_I2C_PCA953X_ADDR; int ret = CMD_RET_USAGE, val; ulong ul_arg2 = 0; ulong ul_arg3 = 0; diff --git a/drivers/gpio/tca642x.c b/drivers/gpio/tca642x.c index 7f67f96b0e..b07496e6e4 100644 --- a/drivers/gpio/tca642x.c +++ b/drivers/gpio/tca642x.c @@ -52,7 +52,7 @@ static int tca642x_reg_write(uchar chip, uint8_t addr, int ret; org_bus_num = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); + i2c_set_bus_num(CFG_SYS_I2C_TCA642X_BUS_NUM); if (i2c_read(chip, addr, 1, (uint8_t *)&valw, 1)) { printf("Could not read before writing\n"); @@ -76,7 +76,7 @@ static int tca642x_reg_read(uchar chip, uint8_t addr, uint8_t *data) int ret = 0; org_bus_num = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_I2C_TCA642X_BUS_NUM); + i2c_set_bus_num(CFG_SYS_I2C_TCA642X_BUS_NUM); if (i2c_read(chip, addr, 1, (u8 *)&valw, 1)) { ret = -1; goto error; @@ -242,7 +242,7 @@ static struct cmd_tbl cmd_tca642x[] = { static int do_tca642x(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) { - static uchar chip = CONFIG_SYS_I2C_TCA642X_ADDR; + static uchar chip = CFG_SYS_I2C_TCA642X_ADDR; int ret = CMD_RET_USAGE, val; int gpio_bank = 0; uint8_t bank_shift; diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c index ae177227de..25ef937dc0 100644 --- a/drivers/i2c/davinci_i2c.c +++ b/drivers/i2c/davinci_i2c.c @@ -91,7 +91,7 @@ static uint _davinci_i2c_setspeed(struct i2c_regs *i2c_base, psc = 2; /* SCLL + SCLH */ - div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; + div = (CFG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; REG(&(i2c_base->i2c_psc)) = psc; /* 27MHz / (2 + 1) = 9MHz */ REG(&(i2c_base->i2c_scll)) = (div * 50) / 100; /* 50% Duty */ REG(&(i2c_base->i2c_sclh)) = div - REG(&(i2c_base->i2c_scll)); diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index edbcd83b64..187db92b75 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -41,7 +41,7 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_M68K -#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR +#define CONFIG_SYS_IMMR CFG_SYS_MBAR #endif #if !CONFIG_IS_ENABLED(DM_I2C) diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index c3f6a1251f..7f65db2320 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -35,7 +35,7 @@ struct i2c_adapter *i2c_get_adapter(int index) #if !defined(CONFIG_SYS_I2C_DIRECT_BUS) struct i2c_bus_hose i2c_bus[CFG_SYS_NUM_I2C_BUSES] = - CONFIG_SYS_I2C_BUSES; + CFG_SYS_I2C_BUSES; #endif DECLARE_GLOBAL_DATA_PTR; @@ -114,7 +114,7 @@ static int i2c_mux_set_all(void) /* Connect requested bus if behind muxes */ if (i2c_bus_tmp->next_hop[0].chip != 0) { /* Set all muxes along the path to that bus */ - for (i = 0; i < CONFIG_SYS_I2C_MAX_HOPS; i++) { + for (i = 0; i < CFG_SYS_I2C_MAX_HOPS; i++) { int ret; if (i2c_bus_tmp->next_hop[i].chip == 0) @@ -143,7 +143,7 @@ static int i2c_mux_disconnect_all(void) /* Disconnect current bus (turn off muxes if any) */ if ((i2c_bus_tmp->next_hop[0].chip != 0) && (I2C_ADAP->init_done != 0)) { - i = CONFIG_SYS_I2C_MAX_HOPS; + i = CFG_SYS_I2C_MAX_HOPS; do { uint8_t chip; int ret; diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c index 4edcba2911..b9b0ff1c39 100644 --- a/drivers/i2c/kona_i2c.c +++ b/drivers/i2c/kona_i2c.c @@ -129,7 +129,7 @@ struct bcm_kona_i2c_dev { #define DEF_DEVICE(num) \ {(void *)CONFIG_SYS_I2C_BASE##num, DEF_SPD, &std_cfg_table[DEF_SPD_ENUM]} -static struct bcm_kona_i2c_dev g_i2c_devs[CONFIG_SYS_MAX_I2C_BUS] = { +static struct bcm_kona_i2c_dev g_i2c_devs[CFG_SYS_MAX_I2C_BUS] = { #ifdef CONFIG_SYS_I2C_BASE0 DEF_DEVICE(0), #endif diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index f48a4f25aa..a9c7d6e1bc 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -42,7 +42,7 @@ DECLARE_GLOBAL_DATA_PTR; #endif /* CONFIG_DM_I2C */ /* - * On SUNXI, we get CONFIG_SYS_TCLK from this include, so we want to + * On SUNXI, we get CFG_SYS_TCLK from this include, so we want to * always have it. */ #if CONFIG_IS_ENABLED(DM_I2C) && defined(CONFIG_ARCH_SUNXI) @@ -427,9 +427,9 @@ static int twsi_stop(struct mvtwsi_registers *twsi, uint tick) static uint twsi_calc_freq(const int n, const int m) { #ifdef CONFIG_ARCH_SUNXI - return CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n)); + return CFG_SYS_TCLK / (10 * (m + 1) * (1 << n)); #else - return CONFIG_SYS_TCLK / (10 * (m + 1) * (2 << n)); + return CFG_SYS_TCLK / (10 * (m + 1) * (2 << n)); #endif } diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index f80ff5383b..9a1599dcd9 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -39,8 +39,8 @@ DECLARE_GLOBAL_DATA_PTR; #define VF610_I2C_REGSHIFT 0 #define I2C_EARLY_INIT_INDEX 0 -#ifdef CONFIG_SYS_I2C_IFDR_DIV -#define I2C_IFDR_DIV_CONSERVATIVE CONFIG_SYS_I2C_IFDR_DIV +#ifdef CFG_SYS_I2C_IFDR_DIV +#define I2C_IFDR_DIV_CONSERVATIVE CFG_SYS_I2C_IFDR_DIV #else #define I2C_IFDR_DIV_CONSERVATIVE 0x7e #endif diff --git a/drivers/misc/fsl_ifc.c b/drivers/misc/fsl_ifc.c index 8fdaacd5e0..58b0058736 100644 --- a/drivers/misc/fsl_ifc.c +++ b/drivers/misc/fsl_ifc.c @@ -12,37 +12,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { { "cs0", -#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0) - CONFIG_SYS_CSPR0, -#ifdef CONFIG_SYS_CSPR0_EXT - CONFIG_SYS_CSPR0_EXT, +#if defined(CFG_SYS_CSPR0) && defined(CFG_SYS_CSOR0) + CFG_SYS_CSPR0, +#ifdef CFG_SYS_CSPR0_EXT + CFG_SYS_CSPR0_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK0 - CONFIG_SYS_AMASK0, +#ifdef CFG_SYS_AMASK0 + CFG_SYS_AMASK0, #else 0, #endif - CONFIG_SYS_CSOR0, + CFG_SYS_CSOR0, { - CONFIG_SYS_CS0_FTIM0, - CONFIG_SYS_CS0_FTIM1, - CONFIG_SYS_CS0_FTIM2, - CONFIG_SYS_CS0_FTIM3, + CFG_SYS_CS0_FTIM0, + CFG_SYS_CS0_FTIM1, + CFG_SYS_CS0_FTIM2, + CFG_SYS_CS0_FTIM3, }, -#ifdef CONFIG_SYS_CSOR0_EXT - CONFIG_SYS_CSOR0_EXT, +#ifdef CFG_SYS_CSOR0_EXT + CFG_SYS_CSOR0_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR0_FINAL - CONFIG_SYS_CSPR0_FINAL, +#ifdef CFG_SYS_CSPR0_FINAL + CFG_SYS_CSPR0_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK0_FINAL - CONFIG_SYS_AMASK0_FINAL, +#ifdef CFG_SYS_AMASK0_FINAL + CFG_SYS_AMASK0_FINAL, #else 0, #endif @@ -52,37 +52,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 2 { "cs1", -#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) - CONFIG_SYS_CSPR1, -#ifdef CONFIG_SYS_CSPR1_EXT - CONFIG_SYS_CSPR1_EXT, +#if defined(CFG_SYS_CSPR1) && defined(CFG_SYS_CSOR1) + CFG_SYS_CSPR1, +#ifdef CFG_SYS_CSPR1_EXT + CFG_SYS_CSPR1_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK1 - CONFIG_SYS_AMASK1, +#ifdef CFG_SYS_AMASK1 + CFG_SYS_AMASK1, #else 0, #endif - CONFIG_SYS_CSOR1, + CFG_SYS_CSOR1, { - CONFIG_SYS_CS1_FTIM0, - CONFIG_SYS_CS1_FTIM1, - CONFIG_SYS_CS1_FTIM2, - CONFIG_SYS_CS1_FTIM3, + CFG_SYS_CS1_FTIM0, + CFG_SYS_CS1_FTIM1, + CFG_SYS_CS1_FTIM2, + CFG_SYS_CS1_FTIM3, }, -#ifdef CONFIG_SYS_CSOR1_EXT - CONFIG_SYS_CSOR1_EXT, +#ifdef CFG_SYS_CSOR1_EXT + CFG_SYS_CSOR1_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR1_FINAL - CONFIG_SYS_CSPR1_FINAL, +#ifdef CFG_SYS_CSPR1_FINAL + CFG_SYS_CSPR1_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK1_FINAL - CONFIG_SYS_AMASK1_FINAL, +#ifdef CFG_SYS_AMASK1_FINAL + CFG_SYS_AMASK1_FINAL, #else 0, #endif @@ -93,37 +93,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 3 { "cs2", -#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) - CONFIG_SYS_CSPR2, -#ifdef CONFIG_SYS_CSPR2_EXT - CONFIG_SYS_CSPR2_EXT, +#if defined(CFG_SYS_CSPR2) && defined(CFG_SYS_CSOR2) + CFG_SYS_CSPR2, +#ifdef CFG_SYS_CSPR2_EXT + CFG_SYS_CSPR2_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK2 - CONFIG_SYS_AMASK2, +#ifdef CFG_SYS_AMASK2 + CFG_SYS_AMASK2, #else 0, #endif - CONFIG_SYS_CSOR2, + CFG_SYS_CSOR2, { - CONFIG_SYS_CS2_FTIM0, - CONFIG_SYS_CS2_FTIM1, - CONFIG_SYS_CS2_FTIM2, - CONFIG_SYS_CS2_FTIM3, + CFG_SYS_CS2_FTIM0, + CFG_SYS_CS2_FTIM1, + CFG_SYS_CS2_FTIM2, + CFG_SYS_CS2_FTIM3, }, -#ifdef CONFIG_SYS_CSOR2_EXT - CONFIG_SYS_CSOR2_EXT, +#ifdef CFG_SYS_CSOR2_EXT + CFG_SYS_CSOR2_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR2_FINAL - CONFIG_SYS_CSPR2_FINAL, +#ifdef CFG_SYS_CSPR2_FINAL + CFG_SYS_CSPR2_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK2_FINAL - CONFIG_SYS_AMASK2_FINAL, +#ifdef CFG_SYS_AMASK2_FINAL + CFG_SYS_AMASK2_FINAL, #else 0, #endif @@ -134,37 +134,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 4 { "cs3", -#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) - CONFIG_SYS_CSPR3, -#ifdef CONFIG_SYS_CSPR3_EXT - CONFIG_SYS_CSPR3_EXT, +#if defined(CFG_SYS_CSPR3) && defined(CFG_SYS_CSOR3) + CFG_SYS_CSPR3, +#ifdef CFG_SYS_CSPR3_EXT + CFG_SYS_CSPR3_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK3 - CONFIG_SYS_AMASK3, +#ifdef CFG_SYS_AMASK3 + CFG_SYS_AMASK3, #else 0, #endif - CONFIG_SYS_CSOR3, + CFG_SYS_CSOR3, { - CONFIG_SYS_CS3_FTIM0, - CONFIG_SYS_CS3_FTIM1, - CONFIG_SYS_CS3_FTIM2, - CONFIG_SYS_CS3_FTIM3, + CFG_SYS_CS3_FTIM0, + CFG_SYS_CS3_FTIM1, + CFG_SYS_CS3_FTIM2, + CFG_SYS_CS3_FTIM3, }, -#ifdef CONFIG_SYS_CSOR3_EXT - CONFIG_SYS_CSOR3_EXT, +#ifdef CFG_SYS_CSOR3_EXT + CFG_SYS_CSOR3_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR3_FINAL - CONFIG_SYS_CSPR3_FINAL, +#ifdef CFG_SYS_CSPR3_FINAL + CFG_SYS_CSPR3_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK3_FINAL - CONFIG_SYS_AMASK3_FINAL, +#ifdef CFG_SYS_AMASK3_FINAL + CFG_SYS_AMASK3_FINAL, #else 0, #endif @@ -175,37 +175,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 5 { "cs4", -#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4) - CONFIG_SYS_CSPR4, -#ifdef CONFIG_SYS_CSPR4_EXT - CONFIG_SYS_CSPR4_EXT, +#if defined(CFG_SYS_CSPR4) && defined(CFG_SYS_CSOR4) + CFG_SYS_CSPR4, +#ifdef CFG_SYS_CSPR4_EXT + CFG_SYS_CSPR4_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK4 - CONFIG_SYS_AMASK4, +#ifdef CFG_SYS_AMASK4 + CFG_SYS_AMASK4, #else 0, #endif - CONFIG_SYS_CSOR4, + CFG_SYS_CSOR4, { - CONFIG_SYS_CS4_FTIM0, - CONFIG_SYS_CS4_FTIM1, - CONFIG_SYS_CS4_FTIM2, - CONFIG_SYS_CS4_FTIM3, + CFG_SYS_CS4_FTIM0, + CFG_SYS_CS4_FTIM1, + CFG_SYS_CS4_FTIM2, + CFG_SYS_CS4_FTIM3, }, -#ifdef CONFIG_SYS_CSOR4_EXT - CONFIG_SYS_CSOR4_EXT, +#ifdef CFG_SYS_CSOR4_EXT + CFG_SYS_CSOR4_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR4_FINAL - CONFIG_SYS_CSPR4_FINAL, +#ifdef CFG_SYS_CSPR4_FINAL + CFG_SYS_CSPR4_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK4_FINAL - CONFIG_SYS_AMASK4_FINAL, +#ifdef CFG_SYS_AMASK4_FINAL + CFG_SYS_AMASK4_FINAL, #else 0, #endif @@ -257,37 +257,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 7 { "cs6", -#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6) - CONFIG_SYS_CSPR6, -#ifdef CONFIG_SYS_CSPR6_EXT - CONFIG_SYS_CSPR6_EXT, +#if defined(CFG_SYS_CSPR6) && defined(CFG_SYS_CSOR6) + CFG_SYS_CSPR6, +#ifdef CFG_SYS_CSPR6_EXT + CFG_SYS_CSPR6_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK6 - CONFIG_SYS_AMASK6, +#ifdef CFG_SYS_AMASK6 + CFG_SYS_AMASK6, #else 0, #endif - CONFIG_SYS_CSOR6, + CFG_SYS_CSOR6, { - CONFIG_SYS_CS6_FTIM0, - CONFIG_SYS_CS6_FTIM1, - CONFIG_SYS_CS6_FTIM2, - CONFIG_SYS_CS6_FTIM3, + CFG_SYS_CS6_FTIM0, + CFG_SYS_CS6_FTIM1, + CFG_SYS_CS6_FTIM2, + CFG_SYS_CS6_FTIM3, }, -#ifdef CONFIG_SYS_CSOR6_EXT - CONFIG_SYS_CSOR6_EXT, +#ifdef CFG_SYS_CSOR6_EXT + CFG_SYS_CSOR6_EXT, #else 0, #endif -#ifdef CONFIG_SYS_CSPR6_FINAL - CONFIG_SYS_CSPR6_FINAL, +#ifdef CFG_SYS_CSPR6_FINAL + CFG_SYS_CSPR6_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK6_FINAL - CONFIG_SYS_AMASK6_FINAL, +#ifdef CFG_SYS_AMASK6_FINAL + CFG_SYS_AMASK6_FINAL, #else 0, #endif @@ -298,37 +298,37 @@ struct ifc_regs ifc_cfg_default_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = { #if CONFIG_SYS_FSL_IFC_BANK_COUNT >= 8 { "cs7", -#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7) - CONFIG_SYS_CSPR7, -#ifdef CONFIG_SYS_CSPR7_EXT - CONFIG_SYS_CSPR7_EXT, +#if defined(CFG_SYS_CSPR7) && defined(CFG_SYS_CSOR7) + CFG_SYS_CSPR7, +#ifdef CFG_SYS_CSPR7_EXT + CFG_SYS_CSPR7_EXT, #else 0, #endif -#ifdef CONFIG_SYS_AMASK7 - CONFIG_SYS_AMASK7, +#ifdef CFG_SYS_AMASK7 + CFG_SYS_AMASK7, #else 0, #endif - CONFIG_SYS_CSOR7, -#ifdef CONFIG_SYS_CSOR7_EXT - CONFIG_SYS_CSOR7_EXT, + CFG_SYS_CSOR7, +#ifdef CFG_SYS_CSOR7_EXT + CFG_SYS_CSOR7_EXT, #else 0, #endif { - CONFIG_SYS_CS7_FTIM0, - CONFIG_SYS_CS7_FTIM1, - CONFIG_SYS_CS7_FTIM2, - CONFIG_SYS_CS7_FTIM3, + CFG_SYS_CS7_FTIM0, + CFG_SYS_CS7_FTIM1, + CFG_SYS_CS7_FTIM2, + CFG_SYS_CS7_FTIM3, }, -#ifdef CONFIG_SYS_CSPR7_FINAL - CONFIG_SYS_CSPR7_FINAL, +#ifdef CFG_SYS_CSPR7_FINAL + CFG_SYS_CSPR7_FINAL, #else 0, #endif -#ifdef CONFIG_SYS_AMASK7_FINAL - CONFIG_SYS_AMASK7_FINAL, +#ifdef CFG_SYS_AMASK7_FINAL + CFG_SYS_AMASK7_FINAL, #else 0, #endif @@ -412,91 +412,91 @@ void init_final_memctl_regs(void) #else void init_early_memctl_regs(void) { -#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0) - set_ifc_ftim(IFC_CS0, IFC_FTIM0, CONFIG_SYS_CS0_FTIM0); - set_ifc_ftim(IFC_CS0, IFC_FTIM1, CONFIG_SYS_CS0_FTIM1); - set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2); - set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3); +#if defined(CFG_SYS_CSPR0) && defined(CFG_SYS_CSOR0) + set_ifc_ftim(IFC_CS0, IFC_FTIM0, CFG_SYS_CS0_FTIM0); + set_ifc_ftim(IFC_CS0, IFC_FTIM1, CFG_SYS_CS0_FTIM1); + set_ifc_ftim(IFC_CS0, IFC_FTIM2, CFG_SYS_CS0_FTIM2); + set_ifc_ftim(IFC_CS0, IFC_FTIM3, CFG_SYS_CS0_FTIM3); #ifndef CONFIG_A003399_NOR_WORKAROUND -#ifdef CONFIG_SYS_CSPR0_EXT - set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT); +#ifdef CFG_SYS_CSPR0_EXT + set_ifc_cspr_ext(IFC_CS0, CFG_SYS_CSPR0_EXT); #endif -#ifdef CONFIG_SYS_CSOR0_EXT - set_ifc_csor_ext(IFC_CS0, CONFIG_SYS_CSOR0_EXT); +#ifdef CFG_SYS_CSOR0_EXT + set_ifc_csor_ext(IFC_CS0, CFG_SYS_CSOR0_EXT); #endif - set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0); - set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); - set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0); + set_ifc_cspr(IFC_CS0, CFG_SYS_CSPR0); + set_ifc_amask(IFC_CS0, CFG_SYS_AMASK0); + set_ifc_csor(IFC_CS0, CFG_SYS_CSOR0); #endif #endif -#ifdef CONFIG_SYS_CSPR1_EXT - set_ifc_cspr_ext(IFC_CS1, CONFIG_SYS_CSPR1_EXT); +#ifdef CFG_SYS_CSPR1_EXT + set_ifc_cspr_ext(IFC_CS1, CFG_SYS_CSPR1_EXT); #endif -#ifdef CONFIG_SYS_CSOR1_EXT - set_ifc_csor_ext(IFC_CS1, CONFIG_SYS_CSOR1_EXT); +#ifdef CFG_SYS_CSOR1_EXT + set_ifc_csor_ext(IFC_CS1, CFG_SYS_CSOR1_EXT); #endif -#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1) - set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0); - set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1); - set_ifc_ftim(IFC_CS1, IFC_FTIM2, CONFIG_SYS_CS1_FTIM2); - set_ifc_ftim(IFC_CS1, IFC_FTIM3, CONFIG_SYS_CS1_FTIM3); +#if defined(CFG_SYS_CSPR1) && defined(CFG_SYS_CSOR1) + set_ifc_ftim(IFC_CS1, IFC_FTIM0, CFG_SYS_CS1_FTIM0); + set_ifc_ftim(IFC_CS1, IFC_FTIM1, CFG_SYS_CS1_FTIM1); + set_ifc_ftim(IFC_CS1, IFC_FTIM2, CFG_SYS_CS1_FTIM2); + set_ifc_ftim(IFC_CS1, IFC_FTIM3, CFG_SYS_CS1_FTIM3); - set_ifc_csor(IFC_CS1, CONFIG_SYS_CSOR1); - set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1); - set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1); + set_ifc_csor(IFC_CS1, CFG_SYS_CSOR1); + set_ifc_amask(IFC_CS1, CFG_SYS_AMASK1); + set_ifc_cspr(IFC_CS1, CFG_SYS_CSPR1); #endif -#ifdef CONFIG_SYS_CSPR2_EXT - set_ifc_cspr_ext(IFC_CS2, CONFIG_SYS_CSPR2_EXT); +#ifdef CFG_SYS_CSPR2_EXT + set_ifc_cspr_ext(IFC_CS2, CFG_SYS_CSPR2_EXT); #endif -#ifdef CONFIG_SYS_CSOR2_EXT - set_ifc_csor_ext(IFC_CS2, CONFIG_SYS_CSOR2_EXT); +#ifdef CFG_SYS_CSOR2_EXT + set_ifc_csor_ext(IFC_CS2, CFG_SYS_CSOR2_EXT); #endif -#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2) - set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0); - set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1); - set_ifc_ftim(IFC_CS2, IFC_FTIM2, CONFIG_SYS_CS2_FTIM2); - set_ifc_ftim(IFC_CS2, IFC_FTIM3, CONFIG_SYS_CS2_FTIM3); +#if defined(CFG_SYS_CSPR2) && defined(CFG_SYS_CSOR2) + set_ifc_ftim(IFC_CS2, IFC_FTIM0, CFG_SYS_CS2_FTIM0); + set_ifc_ftim(IFC_CS2, IFC_FTIM1, CFG_SYS_CS2_FTIM1); + set_ifc_ftim(IFC_CS2, IFC_FTIM2, CFG_SYS_CS2_FTIM2); + set_ifc_ftim(IFC_CS2, IFC_FTIM3, CFG_SYS_CS2_FTIM3); - set_ifc_csor(IFC_CS2, CONFIG_SYS_CSOR2); - set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2); - set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2); + set_ifc_csor(IFC_CS2, CFG_SYS_CSOR2); + set_ifc_amask(IFC_CS2, CFG_SYS_AMASK2); + set_ifc_cspr(IFC_CS2, CFG_SYS_CSPR2); #endif -#ifdef CONFIG_SYS_CSPR3_EXT - set_ifc_cspr_ext(IFC_CS3, CONFIG_SYS_CSPR3_EXT); +#ifdef CFG_SYS_CSPR3_EXT + set_ifc_cspr_ext(IFC_CS3, CFG_SYS_CSPR3_EXT); #endif -#ifdef CONFIG_SYS_CSOR3_EXT - set_ifc_csor_ext(IFC_CS3, CONFIG_SYS_CSOR3_EXT); +#ifdef CFG_SYS_CSOR3_EXT + set_ifc_csor_ext(IFC_CS3, CFG_SYS_CSOR3_EXT); #endif -#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3) - set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0); - set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1); - set_ifc_ftim(IFC_CS3, IFC_FTIM2, CONFIG_SYS_CS3_FTIM2); - set_ifc_ftim(IFC_CS3, IFC_FTIM3, CONFIG_SYS_CS3_FTIM3); +#if defined(CFG_SYS_CSPR3) && defined(CFG_SYS_CSOR3) + set_ifc_ftim(IFC_CS3, IFC_FTIM0, CFG_SYS_CS3_FTIM0); + set_ifc_ftim(IFC_CS3, IFC_FTIM1, CFG_SYS_CS3_FTIM1); + set_ifc_ftim(IFC_CS3, IFC_FTIM2, CFG_SYS_CS3_FTIM2); + set_ifc_ftim(IFC_CS3, IFC_FTIM3, CFG_SYS_CS3_FTIM3); - set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3); - set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3); - set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3); + set_ifc_cspr(IFC_CS3, CFG_SYS_CSPR3); + set_ifc_amask(IFC_CS3, CFG_SYS_AMASK3); + set_ifc_csor(IFC_CS3, CFG_SYS_CSOR3); #endif -#ifdef CONFIG_SYS_CSPR4_EXT - set_ifc_cspr_ext(IFC_CS4, CONFIG_SYS_CSPR4_EXT); +#ifdef CFG_SYS_CSPR4_EXT + set_ifc_cspr_ext(IFC_CS4, CFG_SYS_CSPR4_EXT); #endif -#ifdef CONFIG_SYS_CSOR4_EXT - set_ifc_csor_ext(IFC_CS4, CONFIG_SYS_CSOR4_EXT); +#ifdef CFG_SYS_CSOR4_EXT + set_ifc_csor_ext(IFC_CS4, CFG_SYS_CSOR4_EXT); #endif -#if defined(CONFIG_SYS_CSPR4) && defined(CONFIG_SYS_CSOR4) - set_ifc_ftim(IFC_CS4, IFC_FTIM0, CONFIG_SYS_CS4_FTIM0); - set_ifc_ftim(IFC_CS4, IFC_FTIM1, CONFIG_SYS_CS4_FTIM1); - set_ifc_ftim(IFC_CS4, IFC_FTIM2, CONFIG_SYS_CS4_FTIM2); - set_ifc_ftim(IFC_CS4, IFC_FTIM3, CONFIG_SYS_CS4_FTIM3); +#if defined(CFG_SYS_CSPR4) && defined(CFG_SYS_CSOR4) + set_ifc_ftim(IFC_CS4, IFC_FTIM0, CFG_SYS_CS4_FTIM0); + set_ifc_ftim(IFC_CS4, IFC_FTIM1, CFG_SYS_CS4_FTIM1); + set_ifc_ftim(IFC_CS4, IFC_FTIM2, CFG_SYS_CS4_FTIM2); + set_ifc_ftim(IFC_CS4, IFC_FTIM3, CFG_SYS_CS4_FTIM3); - set_ifc_cspr(IFC_CS4, CONFIG_SYS_CSPR4); - set_ifc_amask(IFC_CS4, CONFIG_SYS_AMASK4); - set_ifc_csor(IFC_CS4, CONFIG_SYS_CSOR4); + set_ifc_cspr(IFC_CS4, CFG_SYS_CSPR4); + set_ifc_amask(IFC_CS4, CFG_SYS_AMASK4); + set_ifc_csor(IFC_CS4, CFG_SYS_CSOR4); #endif #ifdef CONFIG_SYS_CSPR5_EXT @@ -516,66 +516,66 @@ void init_early_memctl_regs(void) set_ifc_csor(IFC_CS5, CONFIG_SYS_CSOR5); #endif -#ifdef CONFIG_SYS_CSPR6_EXT - set_ifc_cspr_ext(IFC_CS6, CONFIG_SYS_CSPR6_EXT); +#ifdef CFG_SYS_CSPR6_EXT + set_ifc_cspr_ext(IFC_CS6, CFG_SYS_CSPR6_EXT); #endif -#ifdef CONFIG_SYS_CSOR6_EXT - set_ifc_csor_ext(IFC_CS6, CONFIG_SYS_CSOR6_EXT); +#ifdef CFG_SYS_CSOR6_EXT + set_ifc_csor_ext(IFC_CS6, CFG_SYS_CSOR6_EXT); #endif -#if defined(CONFIG_SYS_CSPR6) && defined(CONFIG_SYS_CSOR6) - set_ifc_ftim(IFC_CS6, IFC_FTIM0, CONFIG_SYS_CS6_FTIM0); - set_ifc_ftim(IFC_CS6, IFC_FTIM1, CONFIG_SYS_CS6_FTIM1); - set_ifc_ftim(IFC_CS6, IFC_FTIM2, CONFIG_SYS_CS6_FTIM2); - set_ifc_ftim(IFC_CS6, IFC_FTIM3, CONFIG_SYS_CS6_FTIM3); +#if defined(CFG_SYS_CSPR6) && defined(CFG_SYS_CSOR6) + set_ifc_ftim(IFC_CS6, IFC_FTIM0, CFG_SYS_CS6_FTIM0); + set_ifc_ftim(IFC_CS6, IFC_FTIM1, CFG_SYS_CS6_FTIM1); + set_ifc_ftim(IFC_CS6, IFC_FTIM2, CFG_SYS_CS6_FTIM2); + set_ifc_ftim(IFC_CS6, IFC_FTIM3, CFG_SYS_CS6_FTIM3); - set_ifc_cspr(IFC_CS6, CONFIG_SYS_CSPR6); - set_ifc_amask(IFC_CS6, CONFIG_SYS_AMASK6); - set_ifc_csor(IFC_CS6, CONFIG_SYS_CSOR6); + set_ifc_cspr(IFC_CS6, CFG_SYS_CSPR6); + set_ifc_amask(IFC_CS6, CFG_SYS_AMASK6); + set_ifc_csor(IFC_CS6, CFG_SYS_CSOR6); #endif -#ifdef CONFIG_SYS_CSPR7_EXT - set_ifc_cspr_ext(IFC_CS7, CONFIG_SYS_CSPR7_EXT); +#ifdef CFG_SYS_CSPR7_EXT + set_ifc_cspr_ext(IFC_CS7, CFG_SYS_CSPR7_EXT); #endif -#ifdef CONFIG_SYS_CSOR7_EXT - set_ifc_csor_ext(IFC_CS7, CONFIG_SYS_CSOR7_EXT); +#ifdef CFG_SYS_CSOR7_EXT + set_ifc_csor_ext(IFC_CS7, CFG_SYS_CSOR7_EXT); #endif -#if defined(CONFIG_SYS_CSPR7) && defined(CONFIG_SYS_CSOR7) - set_ifc_ftim(IFC_CS7, IFC_FTIM0, CONFIG_SYS_CS7_FTIM0); - set_ifc_ftim(IFC_CS7, IFC_FTIM1, CONFIG_SYS_CS7_FTIM1); - set_ifc_ftim(IFC_CS7, IFC_FTIM2, CONFIG_SYS_CS7_FTIM2); - set_ifc_ftim(IFC_CS7, IFC_FTIM3, CONFIG_SYS_CS7_FTIM3); +#if defined(CFG_SYS_CSPR7) && defined(CFG_SYS_CSOR7) + set_ifc_ftim(IFC_CS7, IFC_FTIM0, CFG_SYS_CS7_FTIM0); + set_ifc_ftim(IFC_CS7, IFC_FTIM1, CFG_SYS_CS7_FTIM1); + set_ifc_ftim(IFC_CS7, IFC_FTIM2, CFG_SYS_CS7_FTIM2); + set_ifc_ftim(IFC_CS7, IFC_FTIM3, CFG_SYS_CS7_FTIM3); - set_ifc_cspr(IFC_CS7, CONFIG_SYS_CSPR7); - set_ifc_amask(IFC_CS7, CONFIG_SYS_AMASK7); - set_ifc_csor(IFC_CS7, CONFIG_SYS_CSOR7); + set_ifc_cspr(IFC_CS7, CFG_SYS_CSPR7); + set_ifc_amask(IFC_CS7, CFG_SYS_AMASK7); + set_ifc_csor(IFC_CS7, CFG_SYS_CSOR7); #endif } void init_final_memctl_regs(void) { -#ifdef CONFIG_SYS_CSPR0_FINAL - set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0_FINAL); +#ifdef CFG_SYS_CSPR0_FINAL + set_ifc_cspr(IFC_CS0, CFG_SYS_CSPR0_FINAL); #endif -#ifdef CONFIG_SYS_AMASK0_FINAL - set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0); +#ifdef CFG_SYS_AMASK0_FINAL + set_ifc_amask(IFC_CS0, CFG_SYS_AMASK0); #endif -#ifdef CONFIG_SYS_CSPR1_FINAL - set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1_FINAL); +#ifdef CFG_SYS_CSPR1_FINAL + set_ifc_cspr(IFC_CS1, CFG_SYS_CSPR1_FINAL); #endif -#ifdef CONFIG_SYS_AMASK1_FINAL - set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1_FINAL); +#ifdef CFG_SYS_AMASK1_FINAL + set_ifc_amask(IFC_CS1, CFG_SYS_AMASK1_FINAL); #endif -#ifdef CONFIG_SYS_CSPR2_FINAL - set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2_FINAL); +#ifdef CFG_SYS_CSPR2_FINAL + set_ifc_cspr(IFC_CS2, CFG_SYS_CSPR2_FINAL); #endif -#ifdef CONFIG_SYS_AMASK2_FINAL - set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2); +#ifdef CFG_SYS_AMASK2_FINAL + set_ifc_amask(IFC_CS2, CFG_SYS_AMASK2); #endif -#ifdef CONFIG_SYS_CSPR3_FINAL - set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3_FINAL); +#ifdef CFG_SYS_CSPR3_FINAL + set_ifc_cspr(IFC_CS3, CFG_SYS_CSPR3_FINAL); #endif -#ifdef CONFIG_SYS_AMASK3_FINAL - set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3); +#ifdef CFG_SYS_AMASK3_FINAL + set_ifc_amask(IFC_CS3, CFG_SYS_AMASK3); #endif } #endif diff --git a/drivers/misc/fsl_portals.c b/drivers/misc/fsl_portals.c index 9c4b4d7e46..6b831281e9 100644 --- a/drivers/misc/fsl_portals.c +++ b/drivers/misc/fsl_portals.c @@ -20,25 +20,25 @@ #endif #include <fsl_qbman.h> -#define MAX_BPORTALS (CONFIG_SYS_BMAN_CINH_SIZE / CONFIG_SYS_BMAN_SP_CINH_SIZE) -#define MAX_QPORTALS (CONFIG_SYS_QMAN_CINH_SIZE / CONFIG_SYS_QMAN_SP_CINH_SIZE) +#define MAX_BPORTALS (CFG_SYS_BMAN_CINH_SIZE / CFG_SYS_BMAN_SP_CINH_SIZE) +#define MAX_QPORTALS (CFG_SYS_QMAN_CINH_SIZE / CFG_SYS_QMAN_SP_CINH_SIZE) void setup_qbman_portals(void) { - void __iomem *bpaddr = (void *)CONFIG_SYS_BMAN_CINH_BASE + - CONFIG_SYS_BMAN_SWP_ISDR_REG; - void __iomem *qpaddr = (void *)CONFIG_SYS_QMAN_CINH_BASE + - CONFIG_SYS_QMAN_SWP_ISDR_REG; + void __iomem *bpaddr = (void *)CFG_SYS_BMAN_CINH_BASE + + CFG_SYS_BMAN_SWP_ISDR_REG; + void __iomem *qpaddr = (void *)CFG_SYS_QMAN_CINH_BASE + + CFG_SYS_QMAN_SWP_ISDR_REG; struct ccsr_qman *qman = (void *)CFG_SYS_FSL_QMAN_ADDR; /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */ #ifdef CONFIG_PHYS_64BIT - out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32)); + out_be32(&qman->qcsp_bare, (u32)(CFG_SYS_QMAN_MEM_PHYS >> 32)); #endif - out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS); + out_be32(&qman->qcsp_bar, (u32)CFG_SYS_QMAN_MEM_PHYS); #ifdef CONFIG_FSL_CORENET int i; - for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) { + for (i = 0; i < CFG_SYS_QMAN_NUM_PORTALS; i++) { u8 sdest = qp_info[i].sdest; u16 fliodn = qp_info[i].fliodn; u16 dliodn = qp_info[i].dliodn; @@ -53,7 +53,7 @@ void setup_qbman_portals(void) #if defined(CONFIG_ARCH_LS1043A) || defined(CONFIG_ARCH_LS1046A) int i; - for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) { + for (i = 0; i < CFG_SYS_QMAN_NUM_PORTALS; i++) { u8 sdest = qp_info[i].sdest; u16 ficid = qp_info[i].ficid; u16 dicid = qp_info[i].dicid; @@ -68,10 +68,10 @@ void setup_qbman_portals(void) #endif /* Change default state of BMan ISDR portals to all 1s */ - inhibit_portals(bpaddr, CONFIG_SYS_BMAN_NUM_PORTALS, MAX_BPORTALS, - CONFIG_SYS_BMAN_SP_CINH_SIZE); - inhibit_portals(qpaddr, CONFIG_SYS_QMAN_NUM_PORTALS, MAX_QPORTALS, - CONFIG_SYS_QMAN_SP_CINH_SIZE); + inhibit_portals(bpaddr, CFG_SYS_BMAN_NUM_PORTALS, MAX_BPORTALS, + CFG_SYS_BMAN_SP_CINH_SIZE); + inhibit_portals(qpaddr, CFG_SYS_QMAN_NUM_PORTALS, MAX_QPORTALS, + CFG_SYS_QMAN_SP_CINH_SIZE); } void inhibit_portals(void __iomem *addr, int max_portals, diff --git a/drivers/misc/fsl_sec_mon.c b/drivers/misc/fsl_sec_mon.c index 321bd27fd3..3597ee2224 100644 --- a/drivers/misc/fsl_sec_mon.c +++ b/drivers/misc/fsl_sec_mon.c @@ -10,7 +10,7 @@ static u32 get_sec_mon_state(void) { struct ccsr_sec_mon_regs *sec_mon_regs = (void *) - (CONFIG_SYS_SEC_MON_ADDR); + (CFG_SYS_SEC_MON_ADDR); return sec_mon_in32(&sec_mon_regs->hp_stat) & HPSR_SSM_ST_MASK; } @@ -19,7 +19,7 @@ static int set_sec_mon_state_non_sec(void) u32 sts; int timeout = 10; struct ccsr_sec_mon_regs *sec_mon_regs = (void *) - (CONFIG_SYS_SEC_MON_ADDR); + (CFG_SYS_SEC_MON_ADDR); sts = get_sec_mon_state(); @@ -120,7 +120,7 @@ static int set_sec_mon_state_soft_fail(void) u32 sts; int timeout = 10; struct ccsr_sec_mon_regs *sec_mon_regs = (void *) - (CONFIG_SYS_SEC_MON_ADDR); + (CFG_SYS_SEC_MON_ADDR); printf("SEC_MON state transitioning to Soft Fail.\n"); sec_mon_setbits32(&sec_mon_regs->hp_com, HPCOMR_SW_FSV); diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c index aa00d7e201..6d7c0cff22 100644 --- a/drivers/mmc/fsl_esdhc_spl.c +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -9,7 +9,7 @@ #include <mmc.h> #include <malloc.h> -#ifndef CONFIG_SYS_MMC_U_BOOT_OFFS +#ifndef CFG_SYS_MMC_U_BOOT_OFFS extern uchar mmc_u_boot_offs[]; #endif @@ -97,7 +97,7 @@ void __noreturn mmc_boot(void) } #ifdef CONFIG_FSL_CORENET - offset = CONFIG_SYS_MMC_U_BOOT_OFFS; + offset = CFG_SYS_MMC_U_BOOT_OFFS; #else sector = 0; again: @@ -153,16 +153,16 @@ again: val = *(tmp_buf + blk_off + ESDHC_BOOT_IMAGE_ADDR + i); offset = (offset << 8) + val; } -#ifndef CONFIG_SYS_MMC_U_BOOT_OFFS +#ifndef CFG_SYS_MMC_U_BOOT_OFFS offset += (ulong)&mmc_u_boot_offs - CONFIG_SPL_TEXT_BASE; #else - offset += CONFIG_SYS_MMC_U_BOOT_OFFS; + offset += CFG_SYS_MMC_U_BOOT_OFFS; #endif #endif /* * Load U-Boot image from mmc into RAM */ - code_len = CONFIG_SYS_MMC_U_BOOT_SIZE; + code_len = CFG_SYS_MMC_U_BOOT_SIZE; blk_start = offset / mmc->read_bl_len; blk_off = offset % mmc->read_bl_len; blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len + 1; @@ -176,7 +176,7 @@ again: blk_start++; } err = mmc->block_dev.block_read(&mmc->block_dev, blk_start, blk_cnt, - (uchar *)CONFIG_SYS_MMC_U_BOOT_DST + + (uchar *)CFG_SYS_MMC_U_BOOT_DST + (blk_off ? (mmc->read_bl_len - blk_off) : 0)); if (err != blk_cnt) { puts("spl: mmc read failed!!\n"); @@ -189,18 +189,18 @@ again: * after SDHC DMA transfer. */ if (blk_off) - memcpy((uchar *)CONFIG_SYS_MMC_U_BOOT_DST, + memcpy((uchar *)CFG_SYS_MMC_U_BOOT_DST, tmp_buf + blk_off, mmc->read_bl_len - blk_off); /* * Clean d-cache and invalidate i-cache, to * make sure that no stale data is executed. */ - flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE); + flush_cache(CFG_SYS_MMC_U_BOOT_DST, CFG_SYS_MMC_U_BOOT_SIZE); /* * Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START; + uboot = (void *)CFG_SYS_MMC_U_BOOT_START; (*uboot)(); } diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 607a22368c..d91819acfd 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -24,8 +24,8 @@ #include <asm/arch/hardware.h> #include "atmel_mci.h" -#ifndef CONFIG_SYS_MMC_CLK_OD -# define CONFIG_SYS_MMC_CLK_OD 150000 +#ifndef CFG_SYS_MMC_CLK_OD +# define CFG_SYS_MMC_CLK_OD 150000 #endif #define MMC_DEFAULT_BLKLEN 512 @@ -448,9 +448,9 @@ static int mci_init(struct mmc *mmc) /* Set default clocks and blocklen */ #ifdef CONFIG_DM_MMC - mci_set_mode(dev, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); + mci_set_mode(dev, CFG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); #else - mci_set_mode(mmc, CONFIG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); + mci_set_mode(mmc, CFG_SYS_MMC_CLK_OD, MMC_DEFAULT_BLKLEN); #endif return 0; diff --git a/drivers/mmc/sh_sdhi.c b/drivers/mmc/sh_sdhi.c index b2d0fac963..3ce7cbf71f 100644 --- a/drivers/mmc/sh_sdhi.c +++ b/drivers/mmc/sh_sdhi.c @@ -761,7 +761,7 @@ int sh_sdhi_init(unsigned long addr, int ch, unsigned long quirks) struct mmc *mmc; struct sh_sdhi_host *host = NULL; - if (ch >= CONFIG_SYS_SH_SDHI_NR_CHANNEL) + if (ch >= CFG_SYS_SH_SDHI_NR_CHANNEL) return -ENODEV; host = malloc(sizeof(struct sh_sdhi_host)); diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index d34d8ee976..c1cdd2cbc3 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -53,7 +53,7 @@ * AMD/Spansion Application Note: Migration from Single-byte to Three-byte * Device IDs, Publication Number 25538 Revision A, November 8, 2001 * - * Define CONFIG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between + * Define CFG_SYS_WRITE_SWAPPED_DATA, if you have to swap the Bytes between * reading and writing ... (yes there is such a Hardware). */ @@ -119,14 +119,14 @@ phys_addr_t cfi_flash_bank_addr(int i) #else __weak phys_addr_t cfi_flash_bank_addr(int i) { - return ((phys_addr_t [])CONFIG_SYS_FLASH_BANKS_LIST)[i]; + return ((phys_addr_t [])CFG_SYS_FLASH_BANKS_LIST)[i]; } #endif __weak unsigned long cfi_flash_bank_size(int i) { -#ifdef CONFIG_SYS_FLASH_BANKS_SIZES - return ((unsigned long [])CONFIG_SYS_FLASH_BANKS_SIZES)[i]; +#ifdef CFG_SYS_FLASH_BANKS_SIZES + return ((unsigned long [])CFG_SYS_FLASH_BANKS_SIZES)[i]; #else return 0; #endif @@ -178,7 +178,7 @@ __maybe_weak u64 flash_read64(void *addr) */ #if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || \ (defined(CONFIG_SYS_MONITOR_BASE) && \ - (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)) + (CONFIG_SYS_MONITOR_BASE >= CFG_SYS_FLASH_BASE)) static flash_info_t *flash_get_info(ulong base) { int i; @@ -227,7 +227,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) int i; int cword_offset; int cp_offset; -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) || defined(CFG_SYS_WRITE_SWAPPED_DATA) u32 cmd_le = cpu_to_le32(cmd); #endif uchar val; @@ -235,7 +235,7 @@ static void flash_make_cmd(flash_info_t *info, u32 cmd, void *cmdbuf) for (i = info->portwidth; i > 0; i--) { cword_offset = (info->portwidth - i) % info->chipwidth; -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) || defined(CFG_SYS_WRITE_SWAPPED_DATA) cp_offset = info->portwidth - i; val = *((uchar *)&cmd_le + cword_offset); #else @@ -292,7 +292,7 @@ static inline uchar flash_read_uchar(flash_info_t *info, uint offset) uchar retval; cp = flash_map(info, 0, offset); -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) || defined(CFG_SYS_WRITE_SWAPPED_DATA) retval = flash_read8(cp); #else retval = flash_read8(cp + info->portwidth - 1); @@ -335,7 +335,7 @@ static ulong flash_read_long (flash_info_t *info, flash_sect_t sect, for (x = 0; x < 4 * info->portwidth; x++) debug("addr[%x] = 0x%x\n", x, flash_read8(addr + x)); #endif -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) || defined(CFG_SYS_WRITE_SWAPPED_DATA) retval = ((flash_read8(addr) << 16) | (flash_read8(addr + info->portwidth) << 24) | (flash_read8(addr + 2 * info->portwidth)) | @@ -580,7 +580,7 @@ static int flash_status_check(flash_info_t *info, flash_sect_t sector, #endif /* Wait for command completion */ -#ifdef CONFIG_SYS_LOW_RES_TIMER +#ifdef CFG_SYS_LOW_RES_TIMER reset_timer(); #endif start = get_timer(0); @@ -673,7 +673,7 @@ static int flash_status_poll(flash_info_t *info, void *src, void *dst, #endif /* Wait for command completion */ -#ifdef CONFIG_SYS_LOW_RES_TIMER +#ifdef CFG_SYS_LOW_RES_TIMER reset_timer(); #endif start = get_timer(0); @@ -713,7 +713,7 @@ static int flash_status_poll(flash_info_t *info, void *src, void *dst, */ static void flash_add_byte(flash_info_t *info, cfiword_t *cword, uchar c) { -#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_SYS_WRITE_SWAPPED_DATA) unsigned short w; unsigned int l; unsigned long long ll; @@ -724,7 +724,7 @@ static void flash_add_byte(flash_info_t *info, cfiword_t *cword, uchar c) cword->w8 = c; break; case FLASH_CFI_16BIT: -#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_SYS_WRITE_SWAPPED_DATA) w = c; w <<= 8; cword->w16 = (cword->w16 >> 8) | w; @@ -733,7 +733,7 @@ static void flash_add_byte(flash_info_t *info, cfiword_t *cword, uchar c) #endif break; case FLASH_CFI_32BIT: -#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_SYS_WRITE_SWAPPED_DATA) l = c; l <<= 24; cword->w32 = (cword->w32 >> 8) | l; @@ -742,7 +742,7 @@ static void flash_add_byte(flash_info_t *info, cfiword_t *cword, uchar c) #endif break; case FLASH_CFI_64BIT: -#if defined(__LITTLE_ENDIAN) && !defined(CONFIG_SYS_WRITE_SWAPPED_DATA) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_SYS_WRITE_SWAPPED_DATA) ll = c; ll <<= 56; cword->w64 = (cword->w64 >> 8) | ll; @@ -2359,7 +2359,7 @@ static void flash_protect_default(void) /* Monitor protection ON by default */ #if defined(CONFIG_SYS_MONITOR_BASE) && \ - (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE) && \ + (CONFIG_SYS_MONITOR_BASE >= CFG_SYS_FLASH_BASE) && \ (!defined(CONFIG_MONITOR_IS_IN_RAM)) flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index 59de325640..18abd75441 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -780,10 +780,10 @@ static void fsl_ifc_ctrl_init(void) ver = ifc_in32(&ifc_ctrl->regs.gregs->ifc_rev); if (ver >= FSL_IFC_V2_0_0) ifc_ctrl->regs.rregs = - (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_64KOFFSET; + (void *)CFG_SYS_IFC_ADDR + IFC_RREGS_64KOFFSET; else ifc_ctrl->regs.rregs = - (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_4KOFFSET; + (void *)CFG_SYS_IFC_ADDR + IFC_RREGS_4KOFFSET; /* clear event registers */ ifc_out32(&ifc_ctrl->regs.rregs->ifc_nand.nand_evter_stat, ~0U); diff --git a/drivers/mtd/nand/raw/fsl_ifc_spl.c b/drivers/mtd/nand/raw/fsl_ifc_spl.c index 7d4b77dd11..3b464ce10c 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_spl.c +++ b/drivers/mtd/nand/raw/fsl_ifc_spl.c @@ -54,14 +54,14 @@ static inline int check_read_ecc(uchar *buf, u32 *eccstat, static inline struct fsl_ifc_runtime *runtime_regs_address(void) { - struct fsl_ifc regs = {(void *)CONFIG_SYS_IFC_ADDR, NULL}; + struct fsl_ifc regs = {(void *)CFG_SYS_IFC_ADDR, NULL}; int ver = 0; ver = ifc_in32(®s.gregs->ifc_rev); if (ver >= FSL_IFC_V2_0_0) - regs.rregs = (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_64KOFFSET; + regs.rregs = (void *)CFG_SYS_IFC_ADDR + IFC_RREGS_64KOFFSET; else - regs.rregs = (void *)CONFIG_SYS_IFC_ADDR + IFC_RREGS_4KOFFSET; + regs.rregs = (void *)CFG_SYS_IFC_ADDR + IFC_RREGS_4KOFFSET; return regs.rregs; } @@ -108,7 +108,7 @@ static inline int bad_block(uchar *marker, int port_size) int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) { - struct fsl_ifc_fcm *gregs = (void *)CONFIG_SYS_IFC_ADDR; + struct fsl_ifc_fcm *gregs = (void *)CFG_SYS_IFC_ADDR; struct fsl_ifc_runtime *ifc = NULL; uchar *buf = (uchar *)CFG_SYS_NAND_BASE; int page_size; diff --git a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c index 5bc5301d63..a884c65d18 100644 --- a/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c +++ b/drivers/mtd/nand/raw/lpc32xx_nand_mlc.c @@ -84,8 +84,8 @@ struct lpc32xx_nand_mlc_registers { static struct lpc32xx_nand_mlc_registers __iomem *lpc32xx_nand_mlc_registers = (struct lpc32xx_nand_mlc_registers __iomem *)MLC_NAND_BASE; -#if !defined(CONFIG_SYS_MAX_NAND_CHIPS) -#define CONFIG_SYS_MAX_NAND_CHIPS 1 +#if !defined(CFG_SYS_MAX_NAND_CHIPS) +#define CFG_SYS_MAX_NAND_CHIPS 1 #endif #define clkdiv(v, w, o) (((1+(clk/v)) & w) << o) @@ -586,7 +586,7 @@ void board_nand_init(void) lpc32xx_nand_init(); /* identify chip */ - ret = nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_CHIPS, NULL); + ret = nand_scan_ident(mtd, CFG_SYS_MAX_NAND_CHIPS, NULL); if (ret) { pr_err("nand_scan_ident returned %i", ret); return; diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c index ab6f1a8be3..2699958a5d 100644 --- a/drivers/mtd/onenand/onenand_spl.c +++ b/drivers/mtd/onenand/onenand_spl.c @@ -49,12 +49,12 @@ static inline int onenand_bufferram_address(int block) static inline uint16_t onenand_readw(uint32_t addr) { - return readw(CONFIG_SYS_ONENAND_BASE + addr); + return readw(CFG_SYS_ONENAND_BASE + addr); } static inline void onenand_writew(uint16_t value, uint32_t addr) { - writew(value, CONFIG_SYS_ONENAND_BASE + addr); + writew(value, CFG_SYS_ONENAND_BASE + addr); } static enum onenand_spl_pagesize onenand_spl_get_geometry(void) @@ -82,7 +82,7 @@ static enum onenand_spl_pagesize onenand_spl_get_geometry(void) static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, enum onenand_spl_pagesize pagesize) { - const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM; + const uint32_t addr = CFG_SYS_ONENAND_BASE + ONENAND_DATARAM; uint32_t offset; onenand_writew(onenand_block_address(block), diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c index 3a8c7b867e..04791df69b 100644 --- a/drivers/mtd/onenand/onenand_uboot.c +++ b/drivers/mtd/onenand/onenand_uboot.c @@ -35,7 +35,7 @@ void onenand_init(void) /* It's used for some board init required */ err = onenand_board_init(&onenand_mtd); #else - onenand_chip.base = (void *) CONFIG_SYS_ONENAND_BASE; + onenand_chip.base = (void *) CFG_SYS_ONENAND_BASE; #endif if (!err && !(onenand_scan(&onenand_mtd, 1))) { diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c index 5c41d7558c..dfc35d6eab 100644 --- a/drivers/mtd/spi/fsl_espi_spl.c +++ b/drivers/mtd/spi/fsl_espi_spl.c @@ -49,8 +49,8 @@ void fsl_spi_boot(void) } #ifdef CONFIG_FSL_CORENET - offset = CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; - code_len = CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE; + offset = CFG_SYS_SPI_FLASH_U_BOOT_OFFS; + code_len = CFG_SYS_SPI_FLASH_U_BOOT_SIZE; #else /* * Load U-Boot image from SPI flash into RAM @@ -66,7 +66,7 @@ void fsl_spi_boot(void) flash->page_size, (void *)buf); offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR); /* Skip spl code */ - offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + offset += CFG_SYS_SPI_FLASH_U_BOOT_OFFS; /* Get the code size from offset 0x48 */ code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE); /* Skip spl code */ @@ -76,7 +76,7 @@ void fsl_spi_boot(void) printf("Loading second stage boot loader "); while (copy_len <= code_len) { spi_flash_read(flash, offset + copy_len, 0x2000, - (void *)(CONFIG_SYS_SPI_FLASH_U_BOOT_DST + (void *)(CFG_SYS_SPI_FLASH_U_BOOT_DST + copy_len)); copy_len = copy_len + 0x2000; putc('.'); @@ -85,7 +85,7 @@ void fsl_spi_boot(void) /* * Jump to U-Boot image */ - flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len); - uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START; + flush_cache(CFG_SYS_SPI_FLASH_U_BOOT_DST, code_len); + uboot = (void *)CFG_SYS_SPI_FLASH_U_BOOT_START; (*uboot)(); } diff --git a/drivers/mtd/stm32_flash.c b/drivers/mtd/stm32_flash.c index 95afa2d6bc..4523344ba6 100644 --- a/drivers/mtd/stm32_flash.c +++ b/drivers/mtd/stm32_flash.c @@ -39,7 +39,7 @@ unsigned long flash_init(void) for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { flash_info[i].flash_id = FLASH_STM32; flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; - flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 20); + flash_info[i].start[0] = CFG_SYS_FLASH_BASE + (i << 20); flash_info[i].size = sect_sz_kb[0]; for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) { flash_info[i].start[j] = flash_info[i].start[j - 1] diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index c23e0c0770..c8381cc713 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -128,7 +128,7 @@ static void dtsec_init_phy(struct fm_eth *fm_eth) struct dtsec *regs = (struct dtsec *)CFG_SYS_FSL_FM1_DTSEC1_ADDR; /* Assign a Physical address to the TBI */ - out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); + out_be32(®s->tbipa, CFG_SYS_TBIPA_VALUE); #endif if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII || diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 1d3b7aa058..c476cb3120 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -67,9 +67,9 @@ static void fm_init_muram(int fm_idx, void *reg) void *base = reg; muram[fm_idx].base = base; - muram[fm_idx].size = CONFIG_SYS_FM_MURAM_SIZE; + muram[fm_idx].size = CFG_SYS_FM_MURAM_SIZE; muram[fm_idx].alloc = base + FM_MURAM_RES_SIZE; - muram[fm_idx].top = base + CONFIG_SYS_FM_MURAM_SIZE; + muram[fm_idx].top = base + CFG_SYS_FM_MURAM_SIZE; } /* diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 8443cbb6b6..618c1bccbe 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -244,9 +244,9 @@ int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) { int off; uint32_t ph; - phys_addr_t paddr = CONFIG_SYS_CCSRBAR_PHYS + info->compat_offset; + phys_addr_t paddr = CFG_SYS_CCSRBAR_PHYS + info->compat_offset; #ifndef CONFIG_SYS_FMAN_V3 - u64 dtsec1_addr = (u64)CONFIG_SYS_CCSRBAR_PHYS + + u64 dtsec1_addr = (u64)CFG_SYS_CCSRBAR_PHYS + CFG_SYS_FSL_FM1_DTSEC1_OFFSET; #endif diff --git a/drivers/net/fsl-mc/dpio/qbman_sys.h b/drivers/net/fsl-mc/dpio/qbman_sys.h index 8be38e11a8..ff998d49dc 100644 --- a/drivers/net/fsl-mc/dpio/qbman_sys.h +++ b/drivers/net/fsl-mc/dpio/qbman_sys.h @@ -256,12 +256,12 @@ static inline int qbman_swp_sys_init(struct qbman_swp_sys *s, s->addr_cena = d->cena_bar; s->addr_cinh = d->cinh_bar; - s->cena = (void *)valloc(CONFIG_SYS_PAGE_SIZE); + s->cena = (void *)valloc(CFG_SYS_PAGE_SIZE); if (!s->cena) { printf("Could not allocate page for cena shadow\n"); return -1; } - memset((void *)s->cena, 0x00, CONFIG_SYS_PAGE_SIZE); + memset((void *)s->cena, 0x00, CFG_SYS_PAGE_SIZE); #ifdef QBMAN_CHECKING /* We should never be asked to initialise for a portal that isn't in diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 68833f9ddd..69da465eaa 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -54,7 +54,7 @@ static int mc_memset_resv_ram; static struct mc_version mc_ver_info; static int mc_boot_status = -1; static int mc_dpl_applied = -1; -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET static int mc_aiop_applied = -1; #endif struct fsl_mc_io *root_mc_io = NULL; @@ -500,13 +500,13 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpc_addr) int dpc_size; #endif -#ifdef CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET - BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET > 0xffffffff); +#ifdef CFG_SYS_LS_MC_DRAM_DPC_OFFSET + BUILD_BUG_ON((CFG_SYS_LS_MC_DRAM_DPC_OFFSET & 0x3) != 0 || + CFG_SYS_LS_MC_DRAM_DPC_OFFSET > 0xffffffff); - mc_dpc_offset = CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET; + mc_dpc_offset = CFG_SYS_LS_MC_DRAM_DPC_OFFSET; #else -#error "CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET not defined" +#error "CFG_SYS_LS_MC_DRAM_DPC_OFFSET not defined" #endif /* @@ -531,7 +531,7 @@ static int load_mc_dpc(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpc_addr) } dpc_size = fdt_totalsize(dpc_fdt_hdr); - if (dpc_size > CONFIG_SYS_LS_MC_DPC_MAX_LENGTH) { + if (dpc_size > CFG_SYS_LS_MC_DPC_MAX_LENGTH) { printf("\nfsl-mc: ERROR: Bad DPC image (too large: %d)\n", dpc_size); return -EINVAL; @@ -576,13 +576,13 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr) int dpl_size; #endif -#ifdef CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET - BUILD_BUG_ON((CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || - CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); +#ifdef CFG_SYS_LS_MC_DRAM_DPL_OFFSET + BUILD_BUG_ON((CFG_SYS_LS_MC_DRAM_DPL_OFFSET & 0x3) != 0 || + CFG_SYS_LS_MC_DRAM_DPL_OFFSET > 0xffffffff); - mc_dpl_offset = CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET; + mc_dpl_offset = CFG_SYS_LS_MC_DRAM_DPL_OFFSET; #else -#error "CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET not defined" +#error "CFG_SYS_LS_MC_DRAM_DPL_OFFSET not defined" #endif /* @@ -603,7 +603,7 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr) } dpl_size = fdt_totalsize(dpl_fdt_hdr); - if (dpl_size > CONFIG_SYS_LS_MC_DPL_MAX_LENGTH) { + if (dpl_size > CFG_SYS_LS_MC_DPL_MAX_LENGTH) { printf("\nfsl-mc: ERROR: Bad DPL image (too large: %d)\n", dpl_size); return -EINVAL; @@ -624,7 +624,7 @@ static int load_mc_dpl(u64 mc_ram_addr, size_t mc_ram_size, u64 mc_dpl_addr) */ static unsigned long get_mc_boot_timeout_ms(void) { - unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + unsigned long timeout_ms = CFG_SYS_LS_MC_BOOT_TIMEOUT_MS; char *timeout_ms_env_var = env_get(MC_BOOT_TIMEOUT_ENV_VAR); @@ -636,14 +636,14 @@ static unsigned long get_mc_boot_timeout_ms(void) "\' environment variable: %lu\n", timeout_ms); - timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS; + timeout_ms = CFG_SYS_LS_MC_BOOT_TIMEOUT_MS; } } return timeout_ms; } -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET __weak bool soc_has_aiop(void) { @@ -666,12 +666,12 @@ static int load_mc_aiop_img(u64 aiop_fw_addr) #ifdef CONFIG_SYS_LS_MC_DPC_IN_DDR printf("MC AIOP is preloaded to %#llx\n", mc_ram_addr + - CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET); + CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET); #else aiop_img = (void *)aiop_fw_addr; mc_copy_image("MC AIOP image", - (u64)aiop_img, CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH, - mc_ram_addr + CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET); + (u64)aiop_img, CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH, + mc_ram_addr + CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET); #endif mc_aiop_applied = 0; @@ -896,7 +896,7 @@ int get_mc_boot_status(void) return mc_boot_status; } -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET int get_aiop_apply_status(void) { return mc_aiop_applied; @@ -938,14 +938,14 @@ u64 mc_get_dram_addr(void) */ unsigned long mc_get_dram_block_size(void) { - unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; + unsigned long dram_block_size = CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE; char *dram_block_size_env_var = env_get(MC_MEM_SIZE_ENV_VAR); if (dram_block_size_env_var) { dram_block_size = hextoul(dram_block_size_env_var, NULL); - if (dram_block_size < CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) { + if (dram_block_size < CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE) { printf("fsl-mc: WARNING: Invalid value for \'" MC_MEM_SIZE_ENV_VAR "\' environment variable: %lu\n", @@ -1838,7 +1838,7 @@ static int do_fsl_mc(struct cmd_tbl *cmdtp, int flag, int argc, case 's': { char sub_cmd; u64 mc_fw_addr, mc_dpc_addr; -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET u64 aiop_fw_addr; #endif if (argc < 3) @@ -1864,7 +1864,7 @@ static int do_fsl_mc(struct cmd_tbl *cmdtp, int flag, int argc, err = mc_init_object(); break; -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET case 'a': if (argc < 4) goto usage; diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c index 6825f9e27c..cc61a10740 100644 --- a/drivers/net/fsl_mcdmafec.c +++ b/drivers/net/fsl_mcdmafec.c @@ -43,11 +43,11 @@ DECLARE_GLOBAL_DATA_PTR; static void init_eth_info(struct fec_info_dma *info) { /* setup Receive and Transmit buffer descriptor */ -#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM +#ifdef CFG_SYS_FEC_BUF_USE_SRAM static u32 tmp; if (info->index == 0) - tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; + tmp = CFG_SYS_INIT_RAM_ADDR + 0x1000; else info->rxbd = (cbd_t *)DBUF_LENGTH; @@ -59,7 +59,7 @@ static void init_eth_info(struct fec_info_dma *info) tmp = (u32)info->txbd; info->txbuf = (char *)((u32)info->txbuf + tmp + - (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); + (CFG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); tmp = (u32)info->txbuf; #else info->rxbd = @@ -67,7 +67,7 @@ static void init_eth_info(struct fec_info_dma *info) (PKTBUFSRX * sizeof(cbd_t))); info->txbd = (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, - (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); + (CFG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); info->txbuf = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH); #endif @@ -283,15 +283,15 @@ static int fec_init(struct udevice *dev) /* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) * Settings: Last, Tx CRC */ - for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) { + for (i = 0; i < CFG_SYS_TX_ETH_BUFFER; i++) { info->txbd[i].cbd_sc = 0; info->txbd[i].cbd_datlen = 0; info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); } - info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP; + info->txbd[CFG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP; info->used_tbd_idx = 0; - info->clean_tbd_num = CONFIG_SYS_TX_ETH_BUFFER; + info->clean_tbd_num = CFG_SYS_TX_ETH_BUFFER; /* Set Rx FIFO alarm and granularity value */ fecp->rfcr = 0x0c000000; @@ -352,7 +352,7 @@ static int mcdmafec_send(struct udevice *dev, void *packet, int length) miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status); /* process all the consumed TBDs */ - while (info->clean_tbd_num < CONFIG_SYS_TX_ETH_BUFFER) { + while (info->clean_tbd_num < CFG_SYS_TX_ETH_BUFFER) { p_used_tbd = &info->txbd[info->used_tbd_idx]; if (p_used_tbd->cbd_sc & BD_ENET_TX_READY) { #ifdef ET_DEBUG @@ -363,7 +363,7 @@ static int mcdmafec_send(struct udevice *dev, void *packet, int length) } /* clean this buffer descriptor */ - if (info->used_tbd_idx == (CONFIG_SYS_TX_ETH_BUFFER - 1)) + if (info->used_tbd_idx == (CFG_SYS_TX_ETH_BUFFER - 1)) p_used_tbd->cbd_sc = BD_ENET_TX_WRAP; else p_used_tbd->cbd_sc = 0; @@ -371,7 +371,7 @@ static int mcdmafec_send(struct udevice *dev, void *packet, int length) /* update some indeces for a correct handling of TBD ring */ info->clean_tbd_num++; info->used_tbd_idx = (info->used_tbd_idx + 1) - % CONFIG_SYS_TX_ETH_BUFFER; + % CFG_SYS_TX_ETH_BUFFER; } /* Check for valid length of data. */ @@ -389,7 +389,7 @@ static int mcdmafec_send(struct udevice *dev, void *packet, int length) p_tbd->cbd_datlen = length; p_tbd->cbd_bufaddr = (u32)packet; p_tbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY; - info->tx_idx = (info->tx_idx + 1) % CONFIG_SYS_TX_ETH_BUFFER; + info->tx_idx = (info->tx_idx + 1) % CFG_SYS_TX_ETH_BUFFER; /* Enable DMA transmit task */ MCD_continDma(info->tx_task); @@ -524,8 +524,8 @@ static int mcdmafec_probe(struct udevice *dev) if (val) info->tx_init = fdt32_to_cpu(*val); -#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM - u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; +#ifdef CFG_SYS_FEC_BUF_USE_SRAM + u32 tmp = CFG_SYS_INIT_RAM_ADDR + 0x1000; #endif init_eth_info(info); diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 4dd848932b..ec1fae9688 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -39,11 +39,11 @@ DECLARE_GLOBAL_DATA_PTR; static void init_eth_info(struct fec_info_s *info) { -#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM +#ifdef CFG_SYS_FEC_BUF_USE_SRAM static u32 tmp; if (info->index == 0) - tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; + tmp = CFG_SYS_INIT_RAM_ADDR + 0x1000; else info->rxbd = (cbd_t *)DBUF_LENGTH; @@ -56,7 +56,7 @@ static void init_eth_info(struct fec_info_s *info) tmp = (u32)info->txbd; info->txbuf = (char *)((u32)info->txbuf + tmp + - (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); + (CFG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); tmp = (u32)info->txbuf; #else info->rxbd = @@ -387,7 +387,7 @@ static int mcffec_send(struct udevice *dev, void *packet, int length) /* Activate transmit Buffer Descriptor polling */ fecp->tdar = 0x01000000; /* Descriptor polling active */ -#ifndef CONFIG_SYS_FEC_BUF_USE_SRAM +#ifndef CFG_SYS_FEC_BUF_USE_SRAM /* * FEC unable to initial transmit data packet. * A nop will ensure the descriptor polling active completed. diff --git a/drivers/net/qe/uec.h b/drivers/net/qe/uec.h index 32b7d3e561..551d7061cc 100644 --- a/drivers/net/qe/uec.h +++ b/drivers/net/qe/uec.h @@ -605,10 +605,10 @@ enum uec_num_of_threads { #define STD_UEC_INFO(num) \ { \ .uf_info = { \ - .ucc_num = CONFIG_SYS_UEC##num##_UCC_NUM,\ - .rx_clock = CONFIG_SYS_UEC##num##_RX_CLK, \ - .tx_clock = CONFIG_SYS_UEC##num##_TX_CLK, \ - .eth_type = CONFIG_SYS_UEC##num##_ETH_TYPE,\ + .ucc_num = CFG_SYS_UEC##num##_UCC_NUM,\ + .rx_clock = CFG_SYS_UEC##num##_RX_CLK, \ + .tx_clock = CFG_SYS_UEC##num##_TX_CLK, \ + .eth_type = CFG_SYS_UEC##num##_ETH_TYPE,\ }, \ .num_threads_tx = UEC_NUM_OF_THREADS_1, \ .num_threads_rx = UEC_NUM_OF_THREADS_1, \ @@ -616,9 +616,9 @@ enum uec_num_of_threads { .risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \ .tx_bd_ring_len = 16, \ .rx_bd_ring_len = 16, \ - .phy_address = CONFIG_SYS_UEC##num##_PHY_ADDR, \ - .enet_interface_type = CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \ - .speed = CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \ + .phy_address = CFG_SYS_UEC##num##_PHY_ADDR, \ + .enet_interface_type = CFG_SYS_UEC##num##_INTERFACE_TYPE, \ + .speed = CFG_SYS_UEC##num##_INTERFACE_SPEED, \ } struct uec_inf { diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index d69a9ff477..8b6f034ea1 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -764,7 +764,7 @@ static int tsec_initialize(struct bd_info *bis, priv->phyregs_sgmii = tsec_info->miiregs_sgmii; priv->phyaddr = tsec_info->phyaddr; - priv->tbiaddr = CONFIG_SYS_TBIPA_VALUE; + priv->tbiaddr = CFG_SYS_TBIPA_VALUE; priv->flags = tsec_info->flags; strcpy(dev->name, tsec_info->devname); @@ -832,7 +832,7 @@ int tsec_probe(struct udevice *dev) struct eth_pdata *pdata = dev_get_plat(dev); struct tsec_private *priv = dev_get_priv(dev); struct ofnode_phandle_args phandle_args; - u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; + u32 tbiaddr = CFG_SYS_TBIPA_VALUE; struct tsec_data *data; ofnode parent, child; fdt_addr_t reg; diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c index af8d99cefb..09883f06be 100644 --- a/drivers/net/vsc7385.c +++ b/drivers/net/vsc7385.c @@ -39,13 +39,13 @@ int vsc7385_upload_firmware(void *firmware, unsigned int size) u8 *fw = firmware; unsigned int i; - u32 *gloreset = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c050); - u32 *icpu_ctrl = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c040); - u32 *icpu_addr = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c044); - u32 *icpu_data = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c048); - u32 *icpu_rom_map = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c070); + u32 *gloreset = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c050); + u32 *icpu_ctrl = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c040); + u32 *icpu_addr = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c044); + u32 *icpu_data = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c048); + u32 *icpu_rom_map = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c070); #ifdef DEBUG - u32 *chipid = (u32 *) (CONFIG_SYS_VSC7385_BASE + 0x1c060); + u32 *chipid = (u32 *) (CFG_SYS_VSC7385_BASE + 0x1c060); #endif out_be32(gloreset, 3); diff --git a/drivers/power/power_dialog.c b/drivers/power/power_dialog.c index e286dd108f..ad7aaf35a9 100644 --- a/drivers/power/power_dialog.c +++ b/drivers/power/power_dialog.c @@ -24,7 +24,7 @@ int pmic_dialog_init(unsigned char bus) p->number_of_regs = DIALOG_NUM_OF_REGS; p->interface = PMIC_I2C; - p->hw.i2c.addr = CONFIG_SYS_DIALOG_PMIC_I2C_ADDR; + p->hw.i2c.addr = CFG_SYS_DIALOG_PMIC_I2C_ADDR; p->hw.i2c.tx_num = 1; p->bus = bus; diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h index 83461c024c..63371e71bf 100644 --- a/drivers/qe/uec.h +++ b/drivers/qe/uec.h @@ -605,10 +605,10 @@ enum uec_num_of_threads { #define STD_UEC_INFO(num) \ { \ .uf_info = { \ - .ucc_num = CONFIG_SYS_UEC##num##_UCC_NUM,\ - .rx_clock = CONFIG_SYS_UEC##num##_RX_CLK, \ - .tx_clock = CONFIG_SYS_UEC##num##_TX_CLK, \ - .eth_type = CONFIG_SYS_UEC##num##_ETH_TYPE,\ + .ucc_num = CFG_SYS_UEC##num##_UCC_NUM,\ + .rx_clock = CFG_SYS_UEC##num##_RX_CLK, \ + .tx_clock = CFG_SYS_UEC##num##_TX_CLK, \ + .eth_type = CFG_SYS_UEC##num##_ETH_TYPE,\ }, \ .num_threads_tx = UEC_NUM_OF_THREADS_1, \ .num_threads_rx = UEC_NUM_OF_THREADS_1, \ @@ -616,9 +616,9 @@ enum uec_num_of_threads { .risc_rx = QE_RISC_ALLOCATION_RISC1_AND_RISC2, \ .tx_bd_ring_len = 16, \ .rx_bd_ring_len = 16, \ - .phy_address = CONFIG_SYS_UEC##num##_PHY_ADDR, \ - .enet_interface_type = CONFIG_SYS_UEC##num##_INTERFACE_TYPE, \ - .speed = CONFIG_SYS_UEC##num##_INTERFACE_SPEED, \ + .phy_address = CFG_SYS_UEC##num##_PHY_ADDR, \ + .enet_interface_type = CFG_SYS_UEC##num##_INTERFACE_TYPE, \ + .speed = CFG_SYS_UEC##num##_INTERFACE_SPEED, \ } struct uec_inf { diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 9d429c832f..fcf06d1032 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -52,7 +52,7 @@ * * Some boards do not have a PHY for each ethernet port. These ports are known * as Fixed PHY (or PHY-less) ports. For such ports, set the appropriate - * CONFIG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address) + * CFG_SYS_UECx_PHY_ADDR equal to CONFIG_FIXED_PHY_ADDR (an unused address) * When the drver tries to identify the PHYs, CONFIG_FIXED_PHY will be returned * and the driver will search CONFIG_SYS_FIXED_PHY_PORTS to find what network * speed and duplex should be for the port. @@ -61,10 +61,10 @@ * #define CONFIG_FIXED_PHY 0xFFFFFFFF * #define CONFIG_SYS_FIXED_PHY_ADDR 0x1E (pick an unused phy address) * - * #define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR - * #define CONFIG_SYS_UEC2_PHY_ADDR 0x02 - * #define CONFIG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR - * #define CONFIG_SYS_UEC4_PHY_ADDR 0x04 + * #define CFG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR + * #define CFG_SYS_UEC2_PHY_ADDR 0x02 + * #define CFG_SYS_UEC3_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR + * #define CFG_SYS_UEC4_PHY_ADDR 0x04 * * #define CONFIG_SYS_FIXED_PHY_PORT(name,speed,duplex) \ * {name, speed, duplex}, diff --git a/drivers/rtc/ds1307.c b/drivers/rtc/ds1307.c index 40ca66bdce..0e9d3d24dd 100644 --- a/drivers/rtc/ds1307.c +++ b/drivers/rtc/ds1307.c @@ -80,8 +80,8 @@ enum ds_type { #endif /*---------------------------------------------------------------------*/ -#ifndef CONFIG_SYS_I2C_RTC_ADDR -# define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#ifndef CFG_SYS_I2C_RTC_ADDR +# define CFG_SYS_I2C_RTC_ADDR 0x68 #endif #if defined(CONFIG_RTC_DS1307) && (CONFIG_SYS_I2C_SPEED > 100000) @@ -212,13 +212,13 @@ void rtc_reset (void) static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } #endif /* !CONFIG_DM_RTC */ diff --git a/drivers/rtc/ds1337.c b/drivers/rtc/ds1337.c index 486c01f9ba..2c780ab8ed 100644 --- a/drivers/rtc/ds1337.c +++ b/drivers/rtc/ds1337.c @@ -184,13 +184,13 @@ void rtc_reset (void) static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } #else static uchar rtc_read(struct udevice *dev, uchar reg) diff --git a/drivers/rtc/ds1374.c b/drivers/rtc/ds1374.c index 9f2647d707..89442f9386 100644 --- a/drivers/rtc/ds1374.c +++ b/drivers/rtc/ds1374.c @@ -29,8 +29,8 @@ #endif /*---------------------------------------------------------------------*/ -#ifndef CONFIG_SYS_I2C_RTC_ADDR -# define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#ifndef CFG_SYS_I2C_RTC_ADDR +# define CFG_SYS_I2C_RTC_ADDR 0x68 #endif #if defined(CONFIG_RTC_DS1374) && (CONFIG_SYS_I2C_SPEED > 400000) @@ -194,21 +194,21 @@ void rtc_reset (void){ */ static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write(uchar reg, uchar val, bool set) { if (set == true) { - val |= i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg); - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + val |= i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } else { - val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg) & ~val; - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + val = i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg) & ~val; + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } } static void rtc_write_raw (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c index 5b72e86768..bd32ed2dbf 100644 --- a/drivers/rtc/ds3231.c +++ b/drivers/rtc/ds3231.c @@ -164,13 +164,13 @@ void rtc_enable_32khz_output(void) static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } #else static int ds3231_rtc_get(struct udevice *dev, struct rtc_time *tmp) diff --git a/drivers/rtc/m41t62.c b/drivers/rtc/m41t62.c index 8be532c3e3..66a0faa0ec 100644 --- a/drivers/rtc/m41t62.c +++ b/drivers/rtc/m41t62.c @@ -319,7 +319,7 @@ int rtc_get(struct rtc_time *tm) { u8 buf[M41T62_DATETIME_REG_SIZE]; - i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE); + i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE); m41t62_update_rtc_time(tm, buf); return 0; @@ -329,10 +329,10 @@ int rtc_set(struct rtc_time *tm) { u8 buf[M41T62_DATETIME_REG_SIZE]; - i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE); + i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE); m41t62_set_rtc_buf(tm, buf); - if (i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, buf, + if (i2c_write(CFG_SYS_I2C_RTC_ADDR, 0, 1, buf, M41T62_DATETIME_REG_SIZE)) { printf("I2C write failed in %s()\n", __func__); return -1; @@ -349,8 +349,8 @@ void rtc_reset(void) * M41T82: Make sure HT (Halt Update) bit is cleared. * This bit is 0 in M41T62 so its save to clear it always. */ - i2c_read(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1); + i2c_read(CFG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1); val &= ~M41T80_ALHOUR_HT; - i2c_write(CONFIG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1); + i2c_write(CFG_SYS_I2C_RTC_ADDR, M41T62_REG_ALARM_HOUR, 1, &val, 1); } #endif /* CONFIG_DM_RTC */ diff --git a/drivers/rtc/max6900.c b/drivers/rtc/max6900.c index 11928839dc..e03a87f94d 100644 --- a/drivers/rtc/max6900.c +++ b/drivers/rtc/max6900.c @@ -16,20 +16,20 @@ #include <i2c.h> #include <linux/delay.h> -#ifndef CONFIG_SYS_I2C_RTC_ADDR -#define CONFIG_SYS_I2C_RTC_ADDR 0x50 +#ifndef CFG_SYS_I2C_RTC_ADDR +#define CFG_SYS_I2C_RTC_ADDR 0x50 #endif /* ------------------------------------------------------------------------- */ static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); udelay(2500); } diff --git a/drivers/rtc/pcf8563.c b/drivers/rtc/pcf8563.c index 19faefba7c..91a412440b 100644 --- a/drivers/rtc/pcf8563.c +++ b/drivers/rtc/pcf8563.c @@ -111,12 +111,12 @@ void rtc_reset (void) static uchar rtc_read (uchar reg) { - return (i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, reg)); + return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg)); } static void rtc_write (uchar reg, uchar val) { - i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val); } #else static int pcf8563_rtc_get(struct udevice *dev, struct rtc_time *tmp) diff --git a/drivers/rtc/pt7c4338.c b/drivers/rtc/pt7c4338.c index c987494b66..e0a7bd3662 100644 --- a/drivers/rtc/pt7c4338.c +++ b/drivers/rtc/pt7c4338.c @@ -53,12 +53,12 @@ /****** Helper functions ****************************************/ static u8 rtc_read(u8 reg) { - return i2c_reg_read(CONFIG_SYS_I2C_RTC_ADDR, reg); + return i2c_reg_read(CFG_SYS_I2C_RTC_ADDR, reg); } static void rtc_write(u8 reg, u8 val) { - i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, reg, val); + i2c_reg_write(CFG_SYS_I2C_RTC_ADDR, reg, val); } /****************************************************************/ diff --git a/drivers/rtc/rs5c372.c b/drivers/rtc/rs5c372.c index 97ec001aef..6b1c23ca5d 100644 --- a/drivers/rtc/rs5c372.c +++ b/drivers/rtc/rs5c372.c @@ -39,8 +39,8 @@ static unsigned int rtc_debug = DEBUG; #define rtc_debug 0 /* gcc will remove all the debug code for us */ #endif -#ifndef CONFIG_SYS_I2C_RTC_ADDR -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 +#ifndef CFG_SYS_I2C_RTC_ADDR +#define CFG_SYS_I2C_RTC_ADDR 0x32 #endif #define RS5C372_RAM_SIZE 0x10 @@ -63,7 +63,7 @@ rs5c372_readram(unsigned char *buf, int len) { int ret; - ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len); + ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, len); if (ret != 0) { printf("%s: failed to read\n", __FUNCTION__); return ret; @@ -103,7 +103,7 @@ rs5c372_enable(void) buf[14] = 0; /* reg. 13 */ buf[15] = 0; /* reg. 14 */ buf[16] = USE_24HOUR_MODE; /* reg. 15 */ - ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1); + ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, RS5C372_RAM_SIZE+1); if (ret != 0) { printf("%s: failed\n", __FUNCTION__); return; @@ -204,7 +204,7 @@ int rtc_set (struct rtc_time *tmp) memset(buf, 0, sizeof(buf)); /* only read register 15 */ - ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1); + ret = i2c_read(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1); if (ret == 0) { /* need to save register 15 */ @@ -233,7 +233,7 @@ int rtc_set (struct rtc_time *tmp) printf("WARNING: year should be between 1970 and 2069!\n"); buf[7] = bin2bcd(tmp->tm_year % 100); - ret = i2c_write(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8); + ret = i2c_write(CFG_SYS_I2C_RTC_ADDR, 0, 0, buf, 8); if (ret != 0) { printf("rs5c372_set_datetime(), i2c_master_send() returned %d\n",ret); return -1; diff --git a/drivers/rtc/rx8010sj.c b/drivers/rtc/rx8010sj.c index d513561b82..bf93b55774 100644 --- a/drivers/rtc/rx8010sj.c +++ b/drivers/rtc/rx8010sj.c @@ -33,8 +33,8 @@ #endif /*---------------------------------------------------------------------*/ -#ifndef CONFIG_SYS_I2C_RTC_ADDR -# define CONFIG_SYS_I2C_RTC_ADDR 0x32 +#ifndef CFG_SYS_I2C_RTC_ADDR +# define CFG_SYS_I2C_RTC_ADDR 0x32 #endif /* @@ -313,7 +313,7 @@ static int rx8010sj_rtc_reset(DEV_TYPE *dev) int rtc_get(struct rtc_time *tm) { struct ludevice dev = { - .chip = CONFIG_SYS_I2C_RTC_ADDR, + .chip = CFG_SYS_I2C_RTC_ADDR, }; return rx8010sj_rtc_get(&dev, tm); @@ -322,7 +322,7 @@ int rtc_get(struct rtc_time *tm) int rtc_set(struct rtc_time *tm) { struct ludevice dev = { - .chip = CONFIG_SYS_I2C_RTC_ADDR, + .chip = CFG_SYS_I2C_RTC_ADDR, }; return rx8010sj_rtc_set(&dev, tm); @@ -331,7 +331,7 @@ int rtc_set(struct rtc_time *tm) void rtc_reset(void) { struct ludevice dev = { - .chip = CONFIG_SYS_I2C_RTC_ADDR, + .chip = CFG_SYS_I2C_RTC_ADDR, }; rx8010sj_rtc_reset(&dev); @@ -340,7 +340,7 @@ void rtc_reset(void) void rtc_init(void) { struct ludevice dev = { - .chip = CONFIG_SYS_I2C_RTC_ADDR, + .chip = CFG_SYS_I2C_RTC_ADDR, }; rx8010sj_rtc_init(&dev); diff --git a/drivers/rtc/x1205.c b/drivers/rtc/x1205.c index ce23427b17..4a8d1c5903 100644 --- a/drivers/rtc/x1205.c +++ b/drivers/rtc/x1205.c @@ -77,7 +77,7 @@ static void rtc_write(int reg, u8 val) { - i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1); + i2c_write(CFG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1); } /* @@ -89,7 +89,7 @@ int rtc_get(struct rtc_time *tm) { u8 buf[8]; - i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8); + i2c_read(CFG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8); debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, " "mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n", diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 83cda1f204..8a489a2e3f 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -25,7 +25,7 @@ DECLARE_GLOBAL_DATA_PTR; /* * Table with supported baudrates (defined in config_xyz.h) */ -static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; +static const unsigned long baudrate_table[] = CFG_SYS_BAUDRATE_TABLE; #if CONFIG_IS_ENABLED(SERIAL_PRESENT) static int serial_check_stdout(const void *blob, struct udevice **devp) diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 6cdbb89841..4d54965094 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -22,7 +22,7 @@ static struct serial_device *serial_current; /* * Table with supported baudrates (defined in config_xyz.h) */ -static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; +static const unsigned long baudrate_table[] = CFG_SYS_BAUDRATE_TABLE; /** * serial_null() - Void registration routine of a serial driver @@ -459,7 +459,7 @@ void default_serial_puts(const char *s) } #if CONFIG_POST & CONFIG_SYS_POST_UART -static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE; +static const int bauds[] = CFG_SYS_BAUDRATE_TABLE; /** * uart_post_test() - Test the currently selected serial port using POST diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 0ee6171108..9ebc4ed48f 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -225,7 +225,7 @@ static int __davinci_spi_claim_bus(struct davinci_spi_slave *ds, int cs) SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0); /* setup format */ - scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; + scalar = ((CFG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF; /* * Use following format: @@ -314,7 +314,7 @@ static int davinci_spi_set_speed(struct udevice *bus, uint max_hz) struct davinci_spi_slave *ds = dev_get_priv(bus); debug("%s speed %u\n", __func__, max_hz); - if (max_hz > CONFIG_SYS_SPI_CLK / 2) + if (max_hz > CFG_SYS_SPI_CLK / 2) return -EINVAL; ds->freq = max_hz; diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index bc5da0a1e6..2bb7390bbf 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -131,7 +131,7 @@ static int mvebu_spi_set_speed(struct udevice *bus, uint hz) * follows: * SPI actual frequency = core_clk / (SPR * (2 ^ SPPR)) */ - divider = DIV_ROUND_UP(CONFIG_SYS_TCLK, hz); + divider = DIV_ROUND_UP(CFG_SYS_TCLK, hz); if (divider < 16) { /* This is the easy case, divider is less than 16 */ spr = divider; @@ -205,7 +205,7 @@ static void mvebu_spi_50mhz_ac_timing_erratum(struct udevice *bus, uint mode) data = readl(®->timing1); data &= ~KW_SPI_TMISO_SAMPLE_MASK; - if (CONFIG_SYS_TCLK == 250000000 && + if (CFG_SYS_TCLK == 250000000 && mode & SPI_CPOL && mode & SPI_CPHA) data |= KW_SPI_TMISO_SAMPLE_2; diff --git a/drivers/sysreset/sysreset_xtfpga.c b/drivers/sysreset/sysreset_xtfpga.c index ad1781e6c0..84fbc79016 100644 --- a/drivers/sysreset/sysreset_xtfpga.c +++ b/drivers/sysreset/sysreset_xtfpga.c @@ -15,8 +15,8 @@ static int xtfpga_reset_request(struct udevice *dev, enum sysreset_t type) { switch (type) { case SYSRESET_COLD: - writel(CONFIG_SYS_FPGAREG_RESET_CODE, - CONFIG_SYS_FPGAREG_RESET); + writel(CFG_SYS_FPGAREG_RESET_CODE, + CFG_SYS_FPGAREG_RESET); break; default: return -EPROTONOSUPPORT; diff --git a/drivers/timer/arm_global_timer.c b/drivers/timer/arm_global_timer.c index 065f10bb74..2e50d9fbc5 100644 --- a/drivers/timer/arm_global_timer.c +++ b/drivers/timer/arm_global_timer.c @@ -59,7 +59,7 @@ static int arm_global_timer_probe(struct udevice *dev) return ret; uc_priv->clock_rate = ret; } else { - uc_priv->clock_rate = CONFIG_SYS_HZ_CLOCK; + uc_priv->clock_rate = CFG_SYS_HZ_CLOCK; } /* init timer */ diff --git a/drivers/timer/imx-gpt-timer.c b/drivers/timer/imx-gpt-timer.c index 72be297754..9c3b64ae5b 100644 --- a/drivers/timer/imx-gpt-timer.c +++ b/drivers/timer/imx-gpt-timer.c @@ -28,9 +28,9 @@ #define GPT_CLKSRC_IPG_CLK (1 << 6) #define GPT_CLKSRC_IPG_CLK_24M (5 << 6) -/* If CONFIG_SYS_HZ_CLOCK not specified et's default to 3Mhz */ -#ifndef CONFIG_SYS_HZ_CLOCK -#define CONFIG_SYS_HZ_CLOCK 3000000 +/* If CFG_SYS_HZ_CLOCK not specified et's default to 3Mhz */ +#ifndef CFG_SYS_HZ_CLOCK +#define CFG_SYS_HZ_CLOCK 3000000 #endif struct imx_gpt_timer_regs { @@ -60,7 +60,7 @@ static u64 imx_gpt_timer_get_count(struct udevice *dev) static int imx_gpt_setup(struct imx_gpt_timer_regs *regs, u32 rate) { - u32 prescaler = (rate / CONFIG_SYS_HZ_CLOCK) - 1; + u32 prescaler = (rate / CFG_SYS_HZ_CLOCK) - 1; /* Reset the timer */ setbits_le32(®s->cr, GPT_CR_SWR); @@ -138,7 +138,7 @@ static int imx_gpt_timer_probe(struct udevice *dev) return ret; } - uc_priv->clock_rate = CONFIG_SYS_HZ_CLOCK; + uc_priv->clock_rate = CFG_SYS_HZ_CLOCK; return 0; } diff --git a/drivers/timer/orion-timer.c b/drivers/timer/orion-timer.c index d0eab3ce78..d588f0cbcd 100644 --- a/drivers/timer/orion-timer.c +++ b/drivers/timer/orion-timer.c @@ -72,7 +72,7 @@ unsigned long notrace timer_early_get_rate(void) if (IS_ENABLED(CONFIG_ARCH_MVEBU)) return MVEBU_TIMER_FIXED_RATE_25MHZ; else - return CONFIG_SYS_TCLK; + return CFG_SYS_TCLK; } /** @@ -117,7 +117,7 @@ static int orion_timer_probe(struct udevice *dev) if (type == INPUT_CLOCK_25MHZ) uc_priv->clock_rate = MVEBU_TIMER_FIXED_RATE_25MHZ; else - uc_priv->clock_rate = CONFIG_SYS_TCLK; + uc_priv->clock_rate = CFG_SYS_TCLK; orion_timer_init(priv->base, type); return 0; diff --git a/drivers/timer/stm32_timer.c b/drivers/timer/stm32_timer.c index f07251e54c..1213a14ef1 100644 --- a/drivers/timer/stm32_timer.c +++ b/drivers/timer/stm32_timer.c @@ -97,11 +97,11 @@ static int stm32_timer_probe(struct udevice *dev) rate = clk_get_rate(&clk); /* we set timer prescaler to obtain a 1MHz timer counter frequency */ - psc = (rate / CONFIG_SYS_HZ_CLOCK) - 1; + psc = (rate / CFG_SYS_HZ_CLOCK) - 1; writel(psc, ®s->psc); /* Set timer frequency to 1MHz */ - uc_priv->clock_rate = CONFIG_SYS_HZ_CLOCK; + uc_priv->clock_rate = CFG_SYS_HZ_CLOCK; /* Configure timer for auto-reload */ setbits_le32(®s->cr1, CR1_ARPE); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 9acef5ee4f..3f4418198c 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1993,7 +1993,7 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) gohci.disabled = 1; gohci.sleeping = 0; gohci.irq = -1; - gohci.regs = (struct ohci_regs *)CONFIG_SYS_USB_OHCI_REGS_BASE; + gohci.regs = (struct ohci_regs *)CFG_SYS_USB_OHCI_REGS_BASE; gohci.flags = 0; gohci.slot_name = CONFIG_SYS_USB_OHCI_SLOT_NAME; diff --git a/drivers/video/imx/ipu_common.c b/drivers/video/imx/ipu_common.c index 54d1efc8f5..b0a99c9cd5 100644 --- a/drivers/video/imx/ipu_common.c +++ b/drivers/video/imx/ipu_common.c @@ -221,13 +221,13 @@ static struct clk ipu_clk = { .usecount = 0, }; -#if !defined CONFIG_SYS_LDB_CLOCK -#define CONFIG_SYS_LDB_CLOCK 65000000 +#if !defined CFG_SYS_LDB_CLOCK +#define CFG_SYS_LDB_CLOCK 65000000 #endif static struct clk ldb_clk = { .name = "ldb_clk", - .rate = CONFIG_SYS_LDB_CLOCK, + .rate = CFG_SYS_LDB_CLOCK, .usecount = 0, }; diff --git a/env/Kconfig b/env/Kconfig index 24111dfaf4..4e506ae262 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -140,7 +140,7 @@ config ENV_IS_IN_FLASH type flash chips the second sector can be used: the offset for this sector is given here. - CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE. + CONFIG_ENV_OFFSET is used relative to CFG_SYS_FLASH_BASE. CONFIG_ENV_ADDR: diff --git a/env/embedded.c b/env/embedded.c index 9f26e6cad9..27fb45bf8c 100644 --- a/env/embedded.c +++ b/env/embedded.c @@ -92,6 +92,6 @@ unsigned long env_size __UBOOT_ENV_SECTION__(env_size) = sizeof(env_t); /* * Add in absolutes. */ -GEN_ABS(env_offset, (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)); +GEN_ABS(env_offset, (CONFIG_ENV_ADDR - CFG_SYS_FLASH_BASE)); #endif /* ENV_IS_EMBEDDED */ diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 17c76bcf3d..d60f494b58 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -17,8 +17,8 @@ #endif #endif -#ifndef CONFIG_SYS_BAUDRATE_TABLE -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#ifndef CFG_SYS_BAUDRATE_TABLE +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6dfa3dd0f0..246437a51e 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -13,7 +13,7 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 5000 @@ -41,11 +41,11 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ -#define CONFIG_SYS_PLL_ODR 0x36 -#define CONFIG_SYS_PLL_FDR 0x7D +#define CFG_SYS_CLK 166666666 /* CPU Core Clock */ +#define CFG_SYS_PLL_ODR 0x36 +#define CFG_SYS_PLL_FDR 0x7D -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -53,9 +53,9 @@ * You should know what you are doing if you make changes here. */ /* Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x221 /* * Start addresses for the final memory configuration @@ -75,14 +75,14 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* * Configuration for environment @@ -95,15 +95,15 @@ /* Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -117,8 +117,8 @@ * CS4 - Available * CS5 - Available */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x007F0001 -#define CONFIG_SYS_CS0_CTRL 0x00001FA0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x007F0001 +#define CFG_SYS_CS0_CTRL 0x00001FA0 #endif /* _M5208EVBE_H */ diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index e28662c6e5..128ef50b47 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -18,14 +18,14 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (gpio->par_qspi) -#define CONFIG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) -#define CONFIG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) +#define CFG_SYS_I2C_PINMUX_REG (gpio->par_qspi) +#define CFG_SYS_I2C_PINMUX_CLR ~(GPIO_PAR_FECI2C_SCL_MASK | GPIO_PAR_FECI2C_SDA_MASK) +#define CFG_SYS_I2C_PINMUX_SET (GPIO_PAR_FECI2C_SCL_I2CSCL | GPIO_PAR_FECI2C_SDA_I2CSDA) /* this must be included AFTER the definition of CONFIG COMMANDS (if any) */ #ifdef CONFIG_MCFFEC @@ -50,10 +50,10 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 75000000 -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 +#define CFG_SYS_CLK 75000000 +#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 2 -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /* * Low Level Configuration Settings @@ -63,9 +63,9 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x21 +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x21 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -81,16 +81,16 @@ * the maximum mapped by the Linux kernel during initialization ?? */ /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) +#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -104,15 +104,15 @@ * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -130,13 +130,13 @@ * CS7 - Available */ #ifdef CONFIG_NORFLASH_PS32BIT -# define CONFIG_SYS_CS0_BASE 0xFFC00000 -# define CONFIG_SYS_CS0_MASK 0x003f0001 -# define CONFIG_SYS_CS0_CTRL 0x00001D00 +# define CFG_SYS_CS0_BASE 0xFFC00000 +# define CFG_SYS_CS0_MASK 0x003f0001 +# define CFG_SYS_CS0_CTRL 0x00001D00 #else -# define CONFIG_SYS_CS0_BASE 0xFFE00000 -# define CONFIG_SYS_CS0_MASK 0x001f0001 -# define CONFIG_SYS_CS0_CTRL 0x00001D80 +# define CFG_SYS_CS0_BASE 0xFFE00000 +# define CFG_SYS_CS0_MASK 0x001f0001 +# define CFG_SYS_CS0_CTRL 0x00001D80 #endif #endif /* _M5329EVB_H */ diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index f1da278d51..0e38eeb4a3 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -18,7 +18,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ @@ -26,9 +26,9 @@ * Clock configuration: enable only one of the following options */ -#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ -#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ -#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ +#undef CFG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ /* * Low Level Configuration Settings @@ -36,14 +36,14 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ -#define CONFIG_SYS_MBAR2 0x80000000 +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR2 0x80000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ @@ -56,7 +56,7 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) +#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) #if 0 /* test-only */ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ @@ -67,33 +67,33 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +# define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_FLASH_BASE | \ CF_ADDRMASK(2) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ +#define CFG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ CF_CACR_DBWE) /*----------------------------------------------------------------------- @@ -101,25 +101,25 @@ */ /* CS0 - AMD Flash, address 0xffc00000 */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ +#define CFG_SYS_CS0_BASE 0xffe00000 +#define CFG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ -#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ +#define CFG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ /* CS1 - FPGA, address 0xe0000000 */ -#define CONFIG_SYS_CS1_BASE 0xe0000000 -#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ -#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ +#define CFG_SYS_CS1_BASE 0xe0000000 +#define CFG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ -#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ +#define CFG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ #endif /* M5249 */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index bd3c57d143..7e37c6d119 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -8,7 +8,7 @@ #include <linux/stringify.h> -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* Configuration for environment @@ -20,7 +20,7 @@ env/embedded.o(.text*); #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300) +# define CONFIG_DM9000_BASE (CFG_SYS_CS1_BASE | 0x300) # define DM9000_IO CONFIG_DM9000_BASE # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG @@ -45,18 +45,18 @@ #define CONFIG_HOSTNAME "M5253DEMO" /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) -#define CONFIG_SYS_I2C_PINMUX_SET (0) - -#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ -#define CONFIG_SYS_FAST_CLK -#ifdef CONFIG_SYS_FAST_CLK -# define CONFIG_SYS_PLLCR 0x1243E054 -# define CONFIG_SYS_CLK 140000000 +#define CFG_SYS_I2C_PINMUX_REG (*(u32 *) (CFG_SYS_MBAR+0x19C)) +#define CFG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) +#define CFG_SYS_I2C_PINMUX_SET (0) + +#undef CFG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_SYS_FAST_CLK +#ifdef CFG_SYS_FAST_CLK +# define CFG_SYS_PLLCR 0x1243E054 +# define CFG_SYS_CLK 140000000 #else -# define CONFIG_SYS_PLLCR 0x135a4140 -# define CONFIG_SYS_CLK 70000000 +# define CFG_SYS_PLLCR 0x135a4140 +# define CFG_SYS_CLK 70000000 #endif /* @@ -65,14 +65,14 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ -#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ /* * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /* * Start addresses for the final memory configuration @@ -87,10 +87,10 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) +#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) #define FLASH_SST6401B 0x200 #define SST_ID_xF6401B 0x236D236D @@ -101,45 +101,45 @@ * Amd/Atmel use 0x30 for sector erase, SST use 0x50. * 0x30 is block erase in SST */ -# define CONFIG_SYS_FLASH_SIZE 0x800000 +# define CFG_SYS_FLASH_SIZE 0x800000 #else -# define CONFIG_SYS_SST_SECT 2048 -# define CONFIG_SYS_SST_SECTSZ 0x1000 +# define CFG_SYS_SST_SECT 2048 +# define CFG_SYS_SST_SECTSZ 0x1000 #endif /* Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_FLASH_BASE | \ CF_ADDRMASK(8) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ +#define CFG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ CF_CACR_DBWE) -#define CONFIG_SYS_CS0_BASE 0xFF800000 -#define CONFIG_SYS_CS0_MASK 0x007F0021 -#define CONFIG_SYS_CS0_CTRL 0x00001D80 +#define CFG_SYS_CS0_BASE 0xFF800000 +#define CFG_SYS_CS0_MASK 0x007F0021 +#define CFG_SYS_CS0_CTRL 0x00001D80 -#define CONFIG_SYS_CS1_BASE 0xE0000000 -#define CONFIG_SYS_CS1_MASK 0x00000001 -#define CONFIG_SYS_CS1_CTRL 0x00003DD8 +#define CFG_SYS_CS1_BASE 0xE0000000 +#define CFG_SYS_CS1_MASK 0x00000001 +#define CFG_SYS_CS1_CTRL 0x00003DD8 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ -#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ +#define CFG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ #endif /* _M5253DEMO_H */ diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 7c3bc032bf..847b4c2593 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -17,7 +17,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 10000 /* timeout in milliseconds */ @@ -51,22 +51,22 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 66000000 +#define CFG_SYS_CLK 66000000 /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ -#define CONFIG_SYS_SCR 0x0003 -#define CONFIG_SYS_SPR 0xffff +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_SCR 0x0003 +#define CFG_SYS_SPR 0xffff /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -75,35 +75,35 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 4 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 +#define CFG_SYS_FLASH_BASE 0xffe00000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /* * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -111,11 +111,11 @@ /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_PACNT 0x00000000 -#define CONFIG_SYS_PADDR 0x0000 -#define CONFIG_SYS_PADAT 0x0000 -#define CONFIG_SYS_PBCNT 0x55554155 /* Ethernet/UART configuration */ -#define CONFIG_SYS_PBDDR 0x0000 -#define CONFIG_SYS_PBDAT 0x0000 -#define CONFIG_SYS_PDCNT 0x00000000 +#define CFG_SYS_PACNT 0x00000000 +#define CFG_SYS_PADDR 0x0000 +#define CFG_SYS_PADAT 0x0000 +#define CFG_SYS_PBCNT 0x55554155 /* Ethernet/UART configuration */ +#define CFG_SYS_PBDDR 0x0000 +#define CFG_SYS_PBDAT 0x0000 +#define CFG_SYS_PDCNT 0x00000000 #endif /* _M5272C3_H */ diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 4eb4abea72..ff9f853589 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,7 +21,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -34,9 +34,9 @@ /* Available command configuration */ /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) -#define CONFIG_SYS_I2C_PINMUX_SET (0x000F) +#define CFG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) +#define CFG_SYS_I2C_PINMUX_CLR (0xFFF0) +#define CFG_SYS_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC # define CONFIG_OVERWRITE_ETHADDR_ONCE @@ -54,7 +54,7 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 150000000 +#define CFG_SYS_CLK 150000000 /* * Low Level Configuration Settings @@ -62,13 +62,13 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -77,34 +77,34 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_SYS_FLASH_SIZE 0x200000 +#define CFG_SYS_FLASH_SIZE 0x200000 /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -112,12 +112,12 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CFG_SYS_CS0_BASE 0xffe00000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x001F0001 -#define CONFIG_SYS_CS1_BASE 0x30000000 -#define CONFIG_SYS_CS1_CTRL 0x00001900 -#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CFG_SYS_CS1_BASE 0x30000000 +#define CFG_SYS_CS1_CTRL 0x00001900 +#define CFG_SYS_CS1_MASK 0x00070001 #endif /* _M5275EVB_H */ diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index eda394467e..bde9e770e5 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -17,7 +17,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ @@ -49,25 +49,25 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 64000000 +#define CFG_SYS_CLK 64000000 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CFG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -76,65 +76,65 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xf0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE +#define CFG_SYS_INT_FLASH_BASE 0xf0000000 +#define CFG_SYS_INT_FLASH_ENABLE 0x21 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +# define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ CF_CACR_CEIB | CF_CACR_DBWE | \ CF_CACR_EUSP) /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xFFE00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CFG_SYS_CS0_BASE 0xFFE00000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x001F0001 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ -#define CONFIG_SYS_PADDR 0x0000000 -#define CONFIG_SYS_PADAT 0x0000000 +#define CFG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_SYS_PADDR 0x0000000 +#define CFG_SYS_PADAT 0x0000000 -#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CONFIG_SYS_PBDDR 0x0000000 -#define CONFIG_SYS_PBDAT 0x0000000 +#define CFG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_SYS_PBDDR 0x0000000 +#define CFG_SYS_PBDAT 0x0000000 -#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ -#define CONFIG_SYS_DDRUA 0x05 -#define CONFIG_SYS_PJPAR 0xFF +#define CFG_SYS_PEHLPAR 0xC0 +#define CFG_SYS_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_SYS_DDRUA 0x05 +#define CFG_SYS_PJPAR 0xFF #endif /* _CONFIG_M5282EVB_H */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 159993a46b..0e9ba4c3ad 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -18,17 +18,17 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 5000 #ifdef CONFIG_MCFFEC -# define CONFIG_SYS_TX_ETH_BUFFER 8 -# define CONFIG_SYS_FEC_BUF_USE_SRAM +# define CFG_SYS_TX_ETH_BUFFER 8 +# define CFG_SYS_FEC_BUF_USE_SRAM #endif -#define CONFIG_SYS_RTC_CNT (0x8000) -#define CONFIG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN) +#define CFG_SYS_RTC_CNT (0x8000) +#define CFG_SYS_RTC_SETUP (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN) /* I2C */ @@ -54,10 +54,10 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 80000000 -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 +#define CFG_SYS_CLK 80000000 +#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 /* * Low Level Configuration Settings @@ -67,9 +67,9 @@ /* * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x20000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x221 /* * Start addresses for the final memory configuration @@ -89,17 +89,17 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI # define CONFIG_FLASH_SPANSION_S29WS_N 1 -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ #endif -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -113,15 +113,15 @@ * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) /*----------------------------------------------------------------------- @@ -135,12 +135,12 @@ * CS4 - Available * CS5 - Available */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS0_CTRL 0x00001FA0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x00FF0001 +#define CFG_SYS_CS0_CTRL 0x00001FA0 -#define CONFIG_SYS_CS1_BASE 0xC0000000 -#define CONFIG_SYS_CS1_MASK 0x00070001 -#define CONFIG_SYS_CS1_CTRL 0x00001FA0 +#define CFG_SYS_CS1_BASE 0xC0000000 +#define CFG_SYS_CS1_MASK 0x00070001 +#define CFG_SYS_CS1_CTRL 0x00001FA0 #endif /* _M53017EVB_H */ diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index d7ece63934..8f83810f16 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -18,7 +18,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ @@ -46,12 +46,12 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 80000000 -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 +#define CFG_SYS_CLK 80000000 +#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 -#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000) +#define CFG_SYS_LATCH_ADDR (CFG_SYS_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -61,9 +61,9 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x221 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -83,22 +83,22 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif #ifdef CONFIG_CMD_NAND -# define CFG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE +# define CFG_SYS_NAND_BASE CFG_SYS_CS2_BASE # define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 #endif -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -112,15 +112,15 @@ * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) /*----------------------------------------------------------------------- @@ -134,18 +134,18 @@ * CS4 - Available * CS5 - Available */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x007f0001 -#define CONFIG_SYS_CS0_CTRL 0x00001fa0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x007f0001 +#define CFG_SYS_CS0_CTRL 0x00001fa0 -#define CONFIG_SYS_CS1_BASE 0x10000000 -#define CONFIG_SYS_CS1_MASK 0x001f0001 -#define CONFIG_SYS_CS1_CTRL 0x002A3780 +#define CFG_SYS_CS1_BASE 0x10000000 +#define CFG_SYS_CS1_MASK 0x001f0001 +#define CFG_SYS_CS1_CTRL 0x002A3780 #ifdef CONFIG_CMD_NAND -#define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK (16 << 20) -#define CONFIG_SYS_CS2_CTRL 0x00001f60 +#define CFG_SYS_CS2_BASE 0x20000000 +#define CFG_SYS_CS2_MASK (16 << 20) +#define CFG_SYS_CS2_CTRL 0x00001f60 #endif #endif /* _M5329EVB_H */ diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index b2fc6923e0..43c642edeb 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -20,7 +20,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #define CONFIG_WATCHDOG_TIMEOUT 3360 /* timeout in ms, max is 3.36 sec */ @@ -48,12 +48,12 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_CLK 80000000 -#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 +#define CFG_SYS_CLK 80000000 +#define CFG_SYS_CPU_CLK CFG_SYS_CLK * 3 -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 -#define CONFIG_SYS_LATCH_ADDR (CONFIG_SYS_CS1_BASE + 0x80000) +#define CFG_SYS_LATCH_ADDR (CFG_SYS_CS1_BASE + 0x80000) /* * Low Level Configuration Settings @@ -63,9 +63,9 @@ /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_CTRL 0x221 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -85,20 +85,20 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ #endif -# define CFG_SYS_NAND_BASE CONFIG_SYS_CS2_BASE +# define CFG_SYS_NAND_BASE CFG_SYS_CS2_BASE # define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } # define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -112,15 +112,15 @@ * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) /*----------------------------------------------------------------------- @@ -134,16 +134,16 @@ * CS4 - Available * CS5 - Available */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x007f0001 -#define CONFIG_SYS_CS0_CTRL 0x00001fa0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x007f0001 +#define CFG_SYS_CS0_CTRL 0x00001fa0 -#define CONFIG_SYS_CS1_BASE 0x10000000 -#define CONFIG_SYS_CS1_MASK 0x001f0001 -#define CONFIG_SYS_CS1_CTRL 0x002A3780 +#define CFG_SYS_CS1_BASE 0x10000000 +#define CFG_SYS_CS1_MASK 0x001f0001 +#define CFG_SYS_CS1_CTRL 0x002A3780 -#define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK (16 << 20) -#define CONFIG_SYS_CS2_CTRL 0x00001f60 +#define CFG_SYS_CS2_BASE 0x20000000 +#define CFG_SYS_CS2_MASK (16 << 20) +#define CFG_SYS_CS2_CTRL 0x00001f60 #endif /* _M5373EVB_H */ diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 2e7140cd86..232cf9e998 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -59,21 +59,21 @@ /* Miscellaneous configurable options */ /* Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800) -#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800) +#define CFG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800) +#define CFG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800) /* RAM configuration (note that CFG_SYS_SDRAM_BASE must be zero) */ #define CFG_SYS_SDRAM_BASE 0x00000000 /* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE CONFIG_TEXT_BASE +#define CFG_SYS_FLASH_BASE CONFIG_TEXT_BASE /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Environment Configuration */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index d9627e393d..85c080cf27 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -25,20 +25,20 @@ */ /* System Clock Configuration Register */ -#define CONFIG_SYS_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ -#define CONFIG_SYS_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ -#define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */ +#define CFG_SYS_SCCR_TSEC1CM 1 /* eTSEC1 clock mode (0-3) */ +#define CFG_SYS_SCCR_TSEC2CM 1 /* eTSEC2 clock mode (0-3) */ +#define CFG_SYS_SCCR_SATACM SCCR_SATACM_2 /* SATA1-4 clock mode (0-3) */ /* * System IO Config */ -#define CONFIG_SYS_SICRH 0x08200000 -#define CONFIG_SYS_SICRL 0x00000000 +#define CFG_SYS_SICRH 0x08200000 +#define CFG_SYS_SICRL 0x00000000 /* * Output Buffer Impedance */ -#define CONFIG_SYS_OBIR 0x30100000 +#define CFG_SYS_OBIR 0x30100000 /* * Device configurations @@ -60,9 +60,9 @@ * DDR Setup */ #define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x03000000 +#define CFG_SYS_DDR_SDRAM_CLK_CNTL 0x03000000 -#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN) +#define CFG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN | DDRCDR_ODT | DDRCDR_Q_DRN) #undef CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ @@ -70,14 +70,14 @@ * Manually set up DDR parameters */ #define CFG_SYS_SDRAM_SIZE 0x10000000 /* 256 MiB */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ +#define CFG_SYS_DDR_CS0_BNDS 0x0000000f +#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ | CSCONFIG_ODT_WR_ONLY_CURRENT \ | CSCONFIG_ROW_BIT_13 \ | CSCONFIG_COL_BIT_10) -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ +#define CFG_SYS_DDR_TIMING_3 0x00000000 +#define CFG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ | (0 << TIMING_CFG0_WRT_SHIFT) \ | (0 << TIMING_CFG0_RRT_SHIFT) \ | (0 << TIMING_CFG0_WWT_SHIFT) \ @@ -86,7 +86,7 @@ | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) /* 0x00260802 */ /* DDR400 */ -#define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ +#define CFG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \ | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ | (7 << TIMING_CFG1_CASLAT_SHIFT) \ @@ -95,7 +95,7 @@ | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ | (2 << TIMING_CFG1_WRTORD_SHIFT)) /* 0x3937d322 */ -#define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ +#define CFG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ | (5 << TIMING_CFG2_CPO_SHIFT) \ | (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ | (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ @@ -104,23 +104,23 @@ | (8 << TIMING_CFG2_FOUR_ACT_SHIFT)) /* 0x02984cc8 */ -#define CONFIG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \ +#define CFG_SYS_DDR_INTERVAL ((1024 << SDRAM_INTERVAL_REFINT_SHIFT) \ | (0 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) /* 0x06090100 */ -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ +#define CFG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SREN \ | SDRAM_CFG_SDRAM_TYPE_DDR2) /* 0x43000000 */ -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ -#define CONFIG_SYS_DDR_MODE ((0x0406 << SDRAM_MODE_ESD_SHIFT) \ +#define CFG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ +#define CFG_SYS_DDR_MODE ((0x0406 << SDRAM_MODE_ESD_SHIFT) \ | (0x0442 << SDRAM_MODE_SD_SHIFT)) /* 0x04400442 */ /* DDR400 */ -#define CONFIG_SYS_DDR_MODE2 0x00000000 +#define CFG_SYS_DDR_MODE2 0x00000000 /* * Memory test */ -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ +#undef CFG_SYS_DRAM_TEST /* memory test, takes time */ /* * The reserved memory @@ -129,14 +129,14 @@ /* * Initial RAM Base Address Setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ /* * FLASH on the Local Bus */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ -#define CONFIG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */ +#define CFG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_SYS_FLASH_SIZE 8 /* max FLASH size is 32M */ /* * NAND Flash on the Local Bus @@ -146,14 +146,14 @@ /* Vitesse 7385 */ -#define CONFIG_SYS_VSC7385_BASE 0xF0000000 +#define CFG_SYS_VSC7385_BASE 0xF0000000 /* * Serial Port */ #define CFG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} #define CFG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) @@ -165,13 +165,13 @@ #define CONFIG_FSL_SERDES2 0xe3100 /* I2C */ -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x51} } +#define CFG_SYS_I2C_NOPROBES { {0, 0x51} } /* * Config on-board RTC */ #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ /* * General PCI @@ -198,7 +198,7 @@ #ifdef CONFIG_TSEC1 #define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_SYS_TSEC1_OFFSET 0x24000 +#define CFG_SYS_TSEC1_OFFSET 0x24000 #define TSEC1_PHY_ADDR 2 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) #define TSEC1_PHYIDX 0 @@ -226,7 +226,7 @@ * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ /* * Environment Configuration diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 25b4fe0c7d..ff02c2cd84 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -28,16 +28,16 @@ * Only possible on E500 Version 2 or newer cores. */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0xe0000000 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* I2C addresses of SPD EEPROMs */ #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ @@ -112,32 +112,32 @@ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ +#define CFG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfff000000ull +#define CFG_SYS_FLASH_BASE_PHYS 0xfff000000ull #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_FLASH_BANKS_LIST \ - {CONFIG_SYS_FLASH_BASE_PHYS + 0x800000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST \ + {CFG_SYS_FLASH_BASE_PHYS + 0x800000, CFG_SYS_FLASH_BASE_PHYS} #define CONFIG_HWCONFIG /* enable hwconfig */ /* * SDRAM on the Local Bus */ -#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull +#define CFG_SYS_LBC_SDRAM_BASE_PHYS 0xff0000000ull #else -#define CONFIG_SYS_LBC_SDRAM_BASE_PHYS CONFIG_SYS_LBC_SDRAM_BASE +#define CFG_SYS_LBC_SDRAM_BASE_PHYS CFG_SYS_LBC_SDRAM_BASE #endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ +#define CFG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* * Base Register 2 and Option Register 2 configure SDRAM. - * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. + * The SDRAM base address, CFG_SYS_LBC_SDRAM_BASE, is 0xf0000000. * * For BR2, need: * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 @@ -149,12 +149,12 @@ * 0 4 8 12 16 20 24 28 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 * - * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into + * FIXME: CFG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ /* - * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64. + * The SDRAM size in MB, CFG_SYS_LBC_SDRAM_SIZE, is 64. * * For OR2, need: * 64MB mask for AM, OR2[0:7] = 1111 1100 @@ -167,10 +167,10 @@ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 */ -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ +#define CFG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ +#define CFG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ /* * Common settings for all Local Bus SDRAM commands. @@ -178,7 +178,7 @@ * or BSMA1617 (for CPU 1.0) (old) * is OR'ed in too. */ -#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ +#define CFG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ | LSDMR_PRETOACT7 \ | LSDMR_ACTTORW7 \ | LSDMR_BL8 \ @@ -226,25 +226,25 @@ #define CADMUS_BASE_ADDR_PHYS CADMUS_BASE_ADDR #endif -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port */ #define CFG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600) /* * I2C */ #if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } +#define CFG_SYS_I2C_NOPROBES { {0, 0x69} } #endif /* @@ -326,7 +326,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ /* * Environment Configuration diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 21491b9f97..a8af0a101c 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -16,10 +16,10 @@ #include <asm/config_mpc85xx.h> #ifdef CONFIG_SDCARD -#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CFG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CFG_SYS_MMC_U_BOOT_START (0x11000000) +#define CFG_SYS_MMC_U_BOOT_OFFS (96 << 10) #endif #ifdef CONFIG_SPIFLASH @@ -27,10 +27,10 @@ #define CONFIG_RAMBOOT_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc #else -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) #endif #endif @@ -111,11 +111,11 @@ extern unsigned long get_sdram_size(void); #endif #define CFG_SYS_SDRAM_SIZE get_sdram_size() /* DDR size */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0xffe00000 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* * Memory map @@ -136,15 +136,15 @@ extern unsigned long get_sdram_size(void); */ /* NOR Flash on IFC */ -#define CONFIG_SYS_FLASH_BASE 0xee000000 +#define CFG_SYS_FLASH_BASE 0xee000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -161,7 +161,7 @@ extern unsigned long get_sdram_size(void); FTIM2_NOR_TWP(0x1c) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* CFI for NOR Flash */ @@ -237,85 +237,85 @@ extern unsigned long get_sdram_size(void); /* Set up IFC registers for boot location NOR/NAND */ #if defined(CONFIG_MTD_RAW_NAND) || defined(CONFIG_NAND_SECBOOT) -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif /* CPLD on IFC */ -#define CONFIG_SYS_CPLD_BASE 0xffb00000 +#define CFG_SYS_CPLD_BASE 0xffb00000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffb00000ull +#define CFG_SYS_CPLD_BASE_PHYS 0xfffb00000ull #else -#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE +#define CFG_SYS_CPLD_BASE_PHYS CFG_SYS_CPLD_BASE #endif -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR3 0x0 +#define CFG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR3 0x0 /* CPLD Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 +#define CFG_SYS_CS3_FTIM3 0x0 -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 /* End of used area in RAM */ -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Config the L2 Cache as L2 SRAM */ #if defined(CONFIG_SPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xD0000000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xD0000000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #else -#define CONFIG_SYS_INIT_L2_ADDR 0xD0000000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xD0000000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #endif #endif #endif @@ -324,11 +324,11 @@ extern unsigned long get_sdram_size(void); #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600) /* I2C */ #define I2C_PCA9557_ADDR1 0x18 @@ -343,7 +343,7 @@ extern unsigned long get_sdram_size(void); /* RTC */ #define CONFIG_RTC_PT7C4338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* * SPI interface will not be available in case of NAND boot SPI CS0 will be @@ -393,7 +393,7 @@ extern unsigned long get_sdram_size(void); */ #if defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#define SPL_ENV_ADDR (CFG_SYS_INIT_L2_ADDR + (160 << 10)) #endif #endif @@ -410,7 +410,7 @@ extern unsigned long get_sdram_size(void); * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ /* * Environment Configuration diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index c3ef216333..1e02855fef 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -39,32 +39,32 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ +#define CONFIG_POST CFG_SYS_POST_MEMORY /* test POST memory test */ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CFG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ +#define CFG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ CONFIG_RAMBOOT_TEXT_BASE) #else -#define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR +#define CFG_SYS_INIT_L3_ADDR_PHYS CFG_SYS_INIT_L3_ADDR #endif #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull #endif /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define SPD_EEPROM_ADDRESS 0x52 #define CFG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ @@ -74,18 +74,18 @@ */ /* Set the local bus clock 1/8 of platform clock */ -#define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 +#define CFG_SYS_LBC_LCRR LCRR_CLKDIV_8 /* * This board doesn't have a promjet connector. * However, it uses commone corenet board LAW and TLB. * It is necessary to use the same start address with proper offset. */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CFG_SYS_FLASH_BASE 0xe0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull +#define CFG_SYS_FLASH_BASE_PHYS 0xfe0000000ull #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif #define CONFIG_FSL_CPLD @@ -130,28 +130,28 @@ | OR_FCM_EHTR) #endif /* CONFIG_NAND_FSL_ELBC */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS + 0x8000000} #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW CFG_SYS_INIT_RAM_ADDR /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) #else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#define CFG_SYS_INIT_RAM_ADDR_PHYS CFG_SYS_INIT_RAM_ADDR +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW CFG_SYS_INIT_RAM_ADDR_PHYS #endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -159,13 +159,13 @@ */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* I2C */ @@ -244,52 +244,52 @@ #define CFG_SYS_PCIE3_MEM_PHYS 0xc40000000ull /* Qman/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_NUM_PORTALS 10 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull #else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_MEM_PHYS CFG_SYS_BMAN_MEM_BASE #endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#define CFG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 10 +#define CFG_SYS_QMAN_MEM_BASE 0xf4200000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#define CFG_SYS_QMAN_MEM_PHYS 0xff4200000ull #else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#define CFG_SYS_QMAN_MEM_PHYS CFG_SYS_QMAN_MEM_BASE #endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_MEM_SIZE 0x00200000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 #ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 -#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 -#define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 -#define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 +#define CFG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 +#define CFG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 +#define CFG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 +#define CFG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 +#define CFG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 -#define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c -#define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d -#define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e -#define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f +#define CFG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c +#define CFG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d +#define CFG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e +#define CFG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0 +#define CFG_SYS_FM1_10GEC1_PHY_ADDR 0 -#define CONFIG_SYS_TBIPA_VALUE 8 +#define CFG_SYS_TBIPA_VALUE 8 #endif #ifdef CONFIG_MMC @@ -305,7 +305,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ /* * Environment Configuration diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index 417b9ae7b2..bad34d9771 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -12,7 +12,7 @@ /* * NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CFG_SYS_NS16550_CLK CFG_SYS_TCLK #define CFG_SYS_NS16550_COM1 KW_UART0_BASE /* @@ -32,7 +32,7 @@ * U-Boot bootcode configuration */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ /* size in bytes reserved for initial data */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 87b68227a0..9a9663b34b 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -12,7 +12,7 @@ /* * NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CFG_SYS_NS16550_CLK CFG_SYS_TCLK #define CFG_SYS_NS16550_COM1 KW_UART0_BASE /* @@ -37,7 +37,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ /* size in bytes reserved for initial data */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index b567b63980..b5fb0a9b52 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -29,18 +29,18 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST (0x30000000) +#define CFG_SYS_MMC_U_BOOT_START (0x30000000) +#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -93,7 +93,7 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -101,20 +101,20 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull #endif /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #if defined(CONFIG_TARGET_T1024RDB) #define SPD_EEPROM_ADDRESS 0x51 #define CFG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ @@ -125,15 +125,15 @@ /* * IFC Definitions */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 +#define CFG_SYS_FLASH_BASE 0xe8000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0xf) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -160,30 +160,30 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} #ifdef CONFIG_TARGET_T1024RDB /* CPLD on IFC */ -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) -#define CONFIG_SYS_CSPR2_EXT (0xf) -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ +#define CFG_SYS_CPLD_BASE 0xffdf0000 +#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) +#define CFG_SYS_CSPR2_EXT (0xf) +#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR2 0x0 +#define CFG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR2 0x0 /* CPLD Timing parameters for IFC CS2 */ -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ +#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS2_FTIM3 0x0 +#define CFG_SYS_CS2_FTIM3 0x0 #endif /* NAND Flash on IFC */ @@ -235,72 +235,72 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) #else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#define CFG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW CFG_SYS_INIT_RAM_ADDR_PHYS #endif -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* I2C */ @@ -315,7 +315,7 @@ */ #define RTC #define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* * eSPI - Enhanced SPI @@ -363,36 +363,37 @@ /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_NUM_PORTALS 10 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull #else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_MEM_PHYS CFG_SYS_BMAN_MEM_BASE #endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 10 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull #else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#define CFG_SYS_QMAN_MEM_PHYS CFG_SYS_QMAN_MEM_BASE #endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 + #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN @@ -421,7 +422,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 37dfe32e21..bee4b704a2 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -36,18 +36,18 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST (0x30000000) +#define CFG_SYS_MMC_U_BOOT_START (0x30000000) +#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) #endif #endif @@ -63,7 +63,7 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif @@ -71,24 +71,24 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 /* - * For Secure Boot CONFIG_SYS_INIT_L3_ADDR will be redefined and hence - * Physical address (CONFIG_SYS_INIT_L3_ADDR) and virtual address - * (CONFIG_SYS_INIT_L3_VADDR) will be different. + * For Secure Boot CFG_SYS_INIT_L3_ADDR will be redefined and hence + * Physical address (CFG_SYS_INIT_L3_ADDR) and virtual address + * (CFG_SYS_INIT_L3_VADDR) will be different. */ -#define CONFIG_SYS_INIT_L3_VADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_VADDR 0xFFFC0000 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define SPD_EEPROM_ADDRESS 0x51 @@ -97,11 +97,11 @@ /* * IFC Definitions */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE 0xe8000000 +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) #define CFG_SYS_NOR_CSPR_EXT (0xf) -#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ +#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -128,7 +128,7 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} /* CPLD on IFC */ #define CPLD_LBMAP_MASK 0x3F @@ -157,25 +157,25 @@ #define CPLD_INT_MASK_TDMR2 0x01 #endif -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) -#define CONFIG_SYS_CSPR2_EXT (0xf) -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ +#define CFG_SYS_CPLD_BASE 0xffdf0000 +#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) +#define CFG_SYS_CSPR2_EXT (0xf) +#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR2 0x0 +#define CFG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR2 0x0 /* CPLD Timing parameters for IFC CS2 */ -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ +#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS2_FTIM3 0x0 +#define CFG_SYS_CS2_FTIM3 0x0 /* NAND Flash on IFC */ #define CFG_SYS_NAND_BASE 0xff800000 @@ -213,55 +213,55 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -269,13 +269,13 @@ */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 @@ -289,7 +289,7 @@ */ #define RTC #define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /*DVI encoder*/ #define CONFIG_HDMI_ENCODER_I2C_ADDR 0x75 @@ -344,58 +344,58 @@ /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_BMAN_NUM_PORTALS 10 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 10 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_FMAN_ENET #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1042RDB) -#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 +#define CFG_SYS_SGMII1_PHY_ADDR 0x03 #elif defined(CONFIG_TARGET_T1040D4RDB) -#define CONFIG_SYS_SGMII1_PHY_ADDR 0x01 +#define CFG_SYS_SGMII1_PHY_ADDR 0x01 #elif defined(CONFIG_TARGET_T1042D4RDB) -#define CONFIG_SYS_SGMII1_PHY_ADDR 0x02 -#define CONFIG_SYS_SGMII2_PHY_ADDR 0x03 -#define CONFIG_SYS_SGMII3_PHY_ADDR 0x01 +#define CFG_SYS_SGMII1_PHY_ADDR 0x02 +#define CFG_SYS_SGMII2_PHY_ADDR 0x03 +#define CFG_SYS_SGMII3_PHY_ADDR 0x01 #endif #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB) -#define CONFIG_SYS_RGMII1_PHY_ADDR 0x04 -#define CONFIG_SYS_RGMII2_PHY_ADDR 0x05 +#define CFG_SYS_RGMII1_PHY_ADDR 0x04 +#define CFG_SYS_RGMII2_PHY_ADDR 0x05 #else -#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 -#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02 +#define CFG_SYS_RGMII1_PHY_ADDR 0x01 +#define CFG_SYS_RGMII2_PHY_ADDR 0x02 #endif /* Enable VSC9953 L2 Switch driver on T1040 SoC */ #if defined(CONFIG_TARGET_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB) #define CONFIG_VSC9953 #ifdef CONFIG_TARGET_T1040RDB -#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 -#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 +#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x04 +#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x08 #else -#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 -#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c +#define CFG_SYS_FM1_QSGMII11_PHY_ADDR 0x08 +#define CFG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c #endif #endif #endif @@ -409,7 +409,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Dynamic MTD Partition support with mtdparts diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 798822e503..be8c30db26 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -31,18 +31,18 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) +#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST (0x00200000) +#define CFG_SYS_MMC_U_BOOT_START (0x00200000) +#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -69,18 +69,18 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 @@ -90,16 +90,16 @@ /* * IFC Definitions */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ +#define CFG_SYS_FLASH_BASE 0xe0000000 +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) +#define CFG_SYS_NOR0_CSPR_EXT (0xf) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR1_CSPR_EXT (0xf) +#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -121,8 +121,8 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} #define QIXIS_BASE 0xffdf0000 #define QIXIS_LBMAP_SWITCH 6 @@ -141,23 +141,23 @@ #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) -#define CONFIG_SYS_CSPR3_EXT (0xf) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ +#define CFG_SYS_CSPR3_EXT (0xf) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CSOR3 0x0 +#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CFG_SYS_CSOR3 0x0 /* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 +#define CFG_SYS_CS3_FTIM3 0x0 /* NAND Flash on IFC */ #define CFG_SYS_NAND_BASE 0xff800000 @@ -195,81 +195,81 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 #endif #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Serial Port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* * I2C @@ -360,28 +360,28 @@ /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 18 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 18 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_BMAN_NUM_PORTALS 18 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 18 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN @@ -418,7 +418,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index ea366b671c..795873f423 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -31,18 +31,18 @@ #ifdef CONFIG_SPIFLASH #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000) +#define CFG_SYS_SPI_FLASH_U_BOOT_START (0x00200000) +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) #endif #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000) -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST (0x00200000) +#define CFG_SYS_MMC_U_BOOT_START (0x00200000) +#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -69,18 +69,18 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 @@ -90,10 +90,10 @@ /* * IFC Definitions */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_FLASH_BASE 0xe8000000 +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) +#define CFG_SYS_NOR0_CSPR_EXT (0xf) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -116,29 +116,29 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS } +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS } /* CPLD on IFC */ -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) -#define CONFIG_SYS_CSPR2_EXT (0xf) -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ +#define CFG_SYS_CPLD_BASE 0xffdf0000 +#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) +#define CFG_SYS_CSPR2_EXT (0xf) +#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR2 0x0 +#define CFG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR2 0x0 /* CPLD Timing parameters for IFC CS2 */ -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ +#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS2_FTIM3 0x0 +#define CFG_SYS_CS2_FTIM3 0x0 /* NAND Flash on IFC */ #define CFG_SYS_NAND_BASE 0xff800000 @@ -176,65 +176,65 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Serial Port */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* * I2C @@ -319,28 +319,28 @@ /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 18 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 18 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_BMAN_NUM_PORTALS 18 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 18 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN @@ -384,7 +384,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index cc86c9d4a5..ffd5645493 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -24,10 +24,10 @@ #ifdef CONFIG_SDCARD #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 -#define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 -#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST 0x00200000 +#define CFG_SYS_MMC_U_BOOT_START 0x00200000 +#define CFG_SYS_MMC_U_BOOT_OFFS (260 << 10) #endif #endif @@ -51,39 +51,39 @@ /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 #define SPL_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* * IFC Definitions */ -#define CONFIG_SYS_FLASH_BASE 0xe0000000 -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE 0xe0000000 +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ #define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -91,13 +91,13 @@ */ #define CFG_SYS_NS16550_CLK (get_bus_freq(0)/2) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CFG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CFG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x11C500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x11C600) +#define CFG_SYS_NS16550_COM3 (CFG_SYS_CCSRBAR+0x11D500) +#define CFG_SYS_NS16550_COM4 (CFG_SYS_CCSRBAR+0x11D600) /* I2C */ @@ -135,7 +135,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration @@ -159,14 +159,14 @@ /* * IFC Definitions */ -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ +#define CFG_SYS_NOR0_CSPR_EXT (0xf) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR1_CSPR_EXT (0xf) +#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -188,8 +188,8 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CFG_SYS_FLASH_BASE_PHYS} /* NAND Flash on IFC */ #define CFG_SYS_NAND_BASE 0xff800000 @@ -227,71 +227,71 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 /* CPLD on IFC */ -#define CONFIG_SYS_CPLD_BASE 0xffdf0000 -#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) -#define CONFIG_SYS_CSPR3_EXT (0xf) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ +#define CFG_SYS_CPLD_BASE 0xffdf0000 +#define CFG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CFG_SYS_CPLD_BASE) +#define CFG_SYS_CSPR3_EXT (0xf) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CFG_SYS_CPLD_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CSOR3 0x0 +#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CFG_SYS_CSOR3 0x0 /* CPLD Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 +#define CFG_SYS_CS3_FTIM3 0x0 /* I2C */ #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ @@ -318,28 +318,28 @@ /* Qman/Bman */ #ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_BMAN_NUM_PORTALS 50 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 50 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_BMAN_NUM_PORTALS 50 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_BASE CFG_SYS_BMAN_MEM_BASE +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 50 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 #endif /* CONFIG_NOBQFMAN */ #ifdef CONFIG_SYS_DPAA_FMAN diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 25d9c96e16..69b8b048ce 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -205,8 +205,8 @@ * 0x4C0000 - 0xFFFFFF : Userland (11 MiB + 256 KiB) */ #if defined(CONFIG_NOR) -#define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CFG_SYS_FLASH_BASE (0x08000000) +#define CFG_SYS_FLASH_SIZE 0x01000000 #endif /* NOR support */ #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index a9a4c8d17f..c57a0ddc21 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -89,7 +89,7 @@ /* on one chip */ #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE +#define CFG_SYS_FLASH_BASE NAND_BASE #endif #endif /* __CONFIG_H */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 4ff8528cf8..bcdff2e98a 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -9,7 +9,7 @@ #define __CONFIG_AM43XX_EVM_H #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> @@ -25,7 +25,7 @@ /* SPL defines. */ /* Enabling L2 Cache */ -#define CONFIG_SYS_PL310_BASE 0x48242000 +#define CFG_SYS_PL310_BASE 0x48242000 /* * When building U-Boot such that there is no previous loader diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 84555f3b13..340a8ce6dc 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -53,9 +53,9 @@ * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) * 0x9E0000 - 0x2000000 : USERLAND */ -#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 -#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 -#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 +#define CFG_SYS_SPI_KERNEL_OFFS 0x1E0000 +#define CFG_SYS_SPI_ARGS_OFFS 0x140000 +#define CFG_SYS_SPI_ARGS_SIZE 0x80000 /* SPI SPL */ diff --git a/include/configs/amcore.h b/include/configs/amcore.h index eba78d3894..ee0be972d2 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -10,7 +10,7 @@ #define CONFIG_HOSTNAME "AMCORE" -#define CONFIG_SYS_UART_PORT 0 +#define CFG_SYS_UART_PORT 0 #define CONFIG_EXTRA_ENV_SETTINGS \ "upgrade_uboot=loady; " \ @@ -24,21 +24,21 @@ "erase 0xfff00000 0xffffffff; " \ "cp.b 0x20000 0xfff00000 ${filesize}\0" -#define CONFIG_SYS_CLK 45000000 -#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2) +#define CFG_SYS_CLK 45000000 +#define CFG_SYS_CPU_CLK (CFG_SYS_CLK * 2) /* Register Base Addrs */ -#define CONFIG_SYS_MBAR 0x10000000 +#define CFG_SYS_MBAR 0x10000000 /* Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 /* size of internal SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 0x1000000 -#define CONFIG_SYS_FLASH_BASE 0xffc00000 +#define CFG_SYS_FLASH_BASE 0xffc00000 /* amcore design has flash data bytes wired swapped */ -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA /* reserve 128-4KB */ #define LDS_BOARD_TEXT \ @@ -46,7 +46,7 @@ env/embedded.o(.text*); /* memory map space for linux boot data */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* * Cache Configuration @@ -56,25 +56,25 @@ * sdram - single region - no masks */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \ CF_ACR_EN) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \ CF_CACR_EC) /* CS0 - AMD Flash, address 0xffc00000 */ -#define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16) +#define CFG_SYS_CS0_BASE (CFG_SYS_FLASH_BASE>>16) /* 4MB, AA=0,V=1 C/I BIT for errata */ -#define CONFIG_SYS_CS0_MASK 0x003f0001 +#define CFG_SYS_CS0_MASK 0x003f0001 /* WS=10, AA=1, PS=16bit (10) */ -#define CONFIG_SYS_CS0_CTRL 0x1980 +#define CFG_SYS_CS0_CTRL 0x1980 /* CS1 - DM9000 Ethernet Controller, address 0x30000000 */ -#define CONFIG_SYS_CS1_BASE 0x3000 -#define CONFIG_SYS_CS1_MASK 0x00070001 -#define CONFIG_SYS_CS1_CTRL 0x0100 +#define CFG_SYS_CS1_BASE 0x3000 +#define CFG_SYS_CS1_MASK 0x00070001 +#define CFG_SYS_CS1_CTRL 0x0100 #endif /* __AMCORE_CONFIG_H */ diff --git a/include/configs/ap121.h b/include/configs/ap121.h index 63c7dfc1fe..9c6f76383d 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -8,8 +8,8 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Miscellaneous configurable options */ diff --git a/include/configs/ap143.h b/include/configs/ap143.h index 865aad2a3f..034cd7a7cd 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -8,8 +8,8 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CFG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CFG_SYS_INIT_RAM_SIZE 0x2000 /* * Serial Port diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 0464a69e82..c56b35150a 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -8,8 +8,8 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CFG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CFG_SYS_INIT_RAM_SIZE 0x2000 /* * Serial Port diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index 356d4c35ee..c9375b4d16 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -107,7 +107,7 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif /* __CONFIG_H */ diff --git a/include/configs/arbel.h b/include/configs/arbel.h index ed32e772f8..60758b0ca0 100644 --- a/include/configs/arbel.h +++ b/include/configs/arbel.h @@ -7,9 +7,9 @@ #define __CONFIG_ARBEL_H #define CFG_SYS_SDRAM_BASE 0x0 -#define CONFIG_SYS_BOOTMAPSZ (20 << 20) -#define CONFIG_SYS_INIT_RAM_ADDR CFG_SYS_SDRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_BOOTMAPSZ (20 << 20) +#define CFG_SYS_INIT_RAM_ADDR CFG_SYS_SDRAM_BASE +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* Default environemnt variables */ #define CONFIG_EXTRA_ENV_SETTINGS "uimage_flash_addr=80200000\0" \ diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 90cf4705f4..c1eec5d06c 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -20,7 +20,7 @@ #endif /* Framebuffer */ -#define CONFIG_SYS_LDB_CLOCK 28341000 +#define CFG_SYS_LDB_CLOCK 28341000 #include "mx6_common.h" @@ -407,8 +407,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CFG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/aspeed-common.h b/include/configs/aspeed-common.h index cbd0d6cea0..bb1bd50838 100644 --- a/include/configs/aspeed-common.h +++ b/include/configs/aspeed-common.h @@ -17,11 +17,11 @@ #define CFG_SYS_SDRAM_BASE ASPEED_DRAM_BASE #ifdef CONFIG_PRE_CON_BUF_SZ -#define CONFIG_SYS_INIT_RAM_ADDR (ASPEED_SRAM_BASE + CONFIG_PRE_CON_BUF_SZ) -#define CONFIG_SYS_INIT_RAM_SIZE (ASPEED_SRAM_SIZE - CONFIG_PRE_CON_BUF_SZ) +#define CFG_SYS_INIT_RAM_ADDR (ASPEED_SRAM_BASE + CONFIG_PRE_CON_BUF_SZ) +#define CFG_SYS_INIT_RAM_SIZE (ASPEED_SRAM_SIZE - CONFIG_PRE_CON_BUF_SZ) #else -#define CONFIG_SYS_INIT_RAM_ADDR (ASPEED_SRAM_BASE) -#define CONFIG_SYS_INIT_RAM_SIZE (ASPEED_SRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (ASPEED_SRAM_BASE) +#define CFG_SYS_INIT_RAM_SIZE (ASPEED_SRAM_SIZE) #endif /* diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index b142ea3c33..f5922fc416 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -55,19 +55,19 @@ * interface etc. */ -#define CONFIG_SYS_CLK 80000000 -#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 3) +#define CFG_SYS_CLK 80000000 +#define CFG_SYS_CPU_CLK (CFG_SYS_CLK * 3) #define CFG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ /* * Define baudrate for UART1 (console output, tftp, ...) * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud - * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected + * CFG_SYS_BAUDRATE_TABLE defines values that can be selected * in u-boot command interface */ -#define CONFIG_SYS_UART_PORT (2) -#define CONFIG_SYS_UART2_ALT3_GPIO +#define CFG_SYS_UART_PORT (2) +#define CFG_SYS_UART2_ALT3_GPIO /* * Watchdog configuration; Watchdog is disabled for running from RAM @@ -125,7 +125,7 @@ * it needs non-blocking CFI routines. */ -#define CONFIG_SYS_FPGA_WAIT 1000 +#define CFG_SYS_FPGA_WAIT 1000 /* End of user parameters to be customized */ @@ -139,19 +139,19 @@ /* Base register address */ -#define CONFIG_SYS_MBAR 0xFC000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR 0xFC000000 /* Register Base Addrs */ /* System Conf. Reg. & System Protection Reg. */ -#define CONFIG_SYS_SCR 0x0003; -#define CONFIG_SYS_SPR 0xffff; +#define CFG_SYS_SCR 0x0003; +#define CFG_SYS_SPR 0xffff; /* * Definitions for initial stack pointer and data area (in internal SRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_INIT_RAM_CTRL 0x221 /* * Start addresses for the final memory configuration @@ -170,23 +170,23 @@ * CS4 - unused * CS5 - unused */ -#define CONFIG_SYS_CS0_BASE 0 -#define CONFIG_SYS_CS0_MASK 0x00ff0001 -#define CONFIG_SYS_CS0_CTRL 0x00001fc0 +#define CFG_SYS_CS0_BASE 0 +#define CFG_SYS_CS0_MASK 0x00ff0001 +#define CFG_SYS_CS0_CTRL 0x00001fc0 -#define CONFIG_SYS_CS1_BASE 0x01000000 -#define CONFIG_SYS_CS1_MASK 0x00ff0001 -#define CONFIG_SYS_CS1_CTRL 0x00001fc0 +#define CFG_SYS_CS1_BASE 0x01000000 +#define CFG_SYS_CS1_MASK 0x00ff0001 +#define CFG_SYS_CS1_CTRL 0x00001fc0 -#define CONFIG_SYS_CS2_BASE 0x20000000 -#define CONFIG_SYS_CS2_MASK 0x00ff0001 -#define CONFIG_SYS_CS2_CTRL 0x0000fec0 +#define CFG_SYS_CS2_BASE 0x20000000 +#define CFG_SYS_CS2_MASK 0x00ff0001 +#define CFG_SYS_CS2_CTRL 0x0000fec0 -#define CONFIG_SYS_CS3_BASE 0x21000000 -#define CONFIG_SYS_CS3_MASK 0x00ff0001 -#define CONFIG_SYS_CS3_CTRL 0x0000fec0 +#define CFG_SYS_CS3_BASE 0x21000000 +#define CFG_SYS_CS3_MASK 0x00ff0001 +#define CFG_SYS_CS3_CTRL 0x0000fec0 -#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CFG_SYS_FLASH_BASE 0x00000000 /* Reserve 256 kB for Monitor */ @@ -195,12 +195,12 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + \ +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + \ (CFG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CONFIG_SYS_FLASH_SIZE 0x2000000 +#define CFG_SYS_FLASH_SIZE 0x2000000 #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ @@ -208,15 +208,15 @@ /* Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINVA) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_EC | CF_CACR_CINVA | \ CF_CACR_DCM_P) #endif /* _CONFIG_ASTRO_MCF5373L_H */ diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h index 4631acfd66..4aa876a9f7 100644 --- a/include/configs/at91-sama5_common.h +++ b/include/configs/at91-sama5_common.h @@ -12,7 +12,7 @@ #include <linux/kconfig.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ #endif diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 0d76f419db..b9cc7ba974 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -24,8 +24,8 @@ */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ /* * SDRAM: 1 bank, min 32, max 128 MB @@ -34,11 +34,11 @@ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CFG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) #ifdef CONFIG_AT91SAM9XE -# define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM +# define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM #else -# define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 +# define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 #endif /* NAND flash */ @@ -51,6 +51,6 @@ #endif /* USB */ -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ +#define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index dcc1cca479..56247e390b 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -11,16 +11,16 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ #include <asm/hardware.h> /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 #define CFG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -42,6 +42,6 @@ #define CONFIG_DM9000_NO_SROM /* USB */ -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ +#define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9261_UHP_BASE */ #endif diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index aefa9fc60c..afdb74785f 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -19,20 +19,20 @@ #include <asm/hardware.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 16367660 /* 16.367 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* SDRAM */ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CFG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NOR flash, if populated */ #ifdef CONFIG_SYS_USE_NORFLASH #define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 /* Address and size of Primary Environment Sector */ @@ -50,9 +50,9 @@ #define MASTER_PLL_OUT 3 /* clocks */ -#define CONFIG_SYS_MOR_VAL \ +#define CFG_SYS_MOR_VAL \ (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) -#define CONFIG_SYS_PLLAR_VAL \ +#define CFG_SYS_PLLAR_VAL \ (AT91_PMC_PLLAR_29 | \ AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ AT91_PMC_PLLXR_PLLCOUNT(63) | \ @@ -60,31 +60,31 @@ AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ +#define CFG_SYS_MCKR1_VAL \ (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ +#define CFG_SYS_MCKR2_VAL \ (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 +#define CFG_SYS_PIOD_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 +#define CFG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ +#define CFG_SYS_MATRIX_EBICSA_VAL \ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 0 +#define CFG_SYS_SDRC_MR_VAL1 0 /* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +#define CFG_SYS_SDRC_TR_VAL1 0x13C /* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ +#define CFG_SYS_SDRC_CR_VAL \ (AT91_SDRAMC_NC_9 | \ AT91_SDRAMC_NR_13 | \ AT91_SDRAMC_NB_4 | \ @@ -98,10 +98,10 @@ (1 << 28)) /* Exit Self Refresh to Active Delay */ /* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CFG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CFG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE #define CFG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CFG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH #define CFG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ @@ -110,35 +110,35 @@ #define CFG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CFG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR #define CFG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CFG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL #define CFG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CFG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ #define CFG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ +#define CFG_SYS_SMC0_SETUP0_VAL \ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ +#define CFG_SYS_SMC0_PULSE0_VAL \ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ +#define CFG_SYS_SMC0_CYCLE0_VAL \ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ +#define CFG_SYS_SMC0_MODE0_VAL \ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ AT91_SMC_MODE_DBW_16 | \ AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ +#define CFG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ AT91_RSTC_MR_URSTEN | \ AT91_RSTC_MR_ERSTL(15)) /* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ +#define CFG_SYS_WDTC_WDMR_VAL \ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ AT91_WDT_MR_WDV(0xfff) | \ AT91_WDT_MR_WDDIS | \ @@ -160,6 +160,6 @@ #endif /* USB */ -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ #endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 08cfee1a4e..2ceb8067d5 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -11,8 +11,8 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x70000000 @@ -41,9 +41,9 @@ 56, 57, 58, 59, 60, 61, 62, 63, } #endif -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index 76f87c1619..0f9e2cfb58 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -10,8 +10,8 @@ #define __AT91SAM9N12_CONFIG_H_ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ /* Misc CPU related */ #define CFG_SYS_SDRAM_BASE 0x20000000 @@ -35,9 +35,9 @@ /* SPL */ -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20953f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20953f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index e1111b6dd3..cad00f647b 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -13,15 +13,15 @@ #include <asm/hardware.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CFG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index eb1d1ad60d..509c458e5f 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -9,8 +9,8 @@ #define __CONFIG_H__ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ /* general purpose I/O */ @@ -38,9 +38,9 @@ /* SPL */ -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index 83ac87b10a..03e04e6e68 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -39,15 +39,15 @@ /* support JEDEC */ #define PHYS_FLASH_1 0x88000000 /* BANK 0 */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } /* max number of memory banks */ /* * There are 4 banks supported for this Controller, * but we have only 1 bank connected to flash on board */ -#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} +#define CFG_SYS_FLASH_BANKS_SIZES {0x4000000} /* max number of sectors on one chip */ #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) @@ -63,7 +63,7 @@ */ /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Increase max gunzip size */ /* Support autoboot from RAM (kernel image is loaded via debug port) */ diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index 6d82712186..04dc50b1cb 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -19,8 +19,8 @@ * Memory configuration */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE SZ_512M /* diff --git a/include/configs/bcm7260.h b/include/configs/bcm7260.h index cba109b74a..43edc91b10 100644 --- a/include/configs/bcm7260.h +++ b/include/configs/bcm7260.h @@ -12,7 +12,7 @@ #define CFG_SYS_NS16550_COM1 0xf040c000 -#define CONFIG_SYS_INIT_RAM_ADDR 0x10200000 +#define CFG_SYS_INIT_RAM_ADDR 0x10200000 #include "bcmstb.h" diff --git a/include/configs/bcm7445.h b/include/configs/bcm7445.h index a07f1b7ad0..114337294e 100644 --- a/include/configs/bcm7445.h +++ b/include/configs/bcm7445.h @@ -12,7 +12,7 @@ #define CFG_SYS_NS16550_COM1 0xf040ab00 -#define CONFIG_SYS_INIT_RAM_ADDR 0x80200000 +#define CFG_SYS_INIT_RAM_ADDR 0x80200000 #include "bcmstb.h" diff --git a/include/configs/bcm963138.h b/include/configs/bcm963138.h index f1b68ba673..c61acf6b86 100644 --- a/include/configs/bcm963138.h +++ b/include/configs/bcm963138.h @@ -7,6 +7,6 @@ #define __BCM963138_H #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_HZ_CLOCK 500000000 +#define CFG_SYS_HZ_CLOCK 500000000 #endif diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 9769a71409..57360b60ca 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -82,7 +82,7 @@ extern phys_addr_t prior_stage_fdt_address; * initramfs images, in which case this limitation is eliminated. */ #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x100000 +#define CFG_SYS_INIT_RAM_SIZE 0x100000 /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. @@ -102,7 +102,7 @@ extern phys_addr_t prior_stage_fdt_address; /* * Serial console configuration. */ -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} /* diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index a075a5b2f3..0842a4a8f5 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -200,7 +200,7 @@ #define PHYS_SDRAM_SIZE (SZ_512M) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif /* __CONFIG_H */ diff --git a/include/configs/blanche.h b/include/configs/blanche.h index 0b1fc91d9e..cb28ae28dd 100644 --- a/include/configs/blanche.h +++ b/include/configs/blanche.h @@ -26,10 +26,10 @@ #define CONFIG_SH_QSPI_BASE 0xE6B10000 #else #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ -#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } -#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) } +#define CFG_SYS_FLASH_BASE 0x00000000 +#define CFG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */ +#define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } +#define CFG_SYS_FLASH_BANKS_SIZES { (CFG_SYS_FLASH_SIZE) } #endif /* Board Clock */ diff --git a/include/configs/bmips_bcm3380.h b/include/configs/bmips_bcm3380.h index e40f110cac..0d254cd7f9 100644 --- a/include/configs/bmips_bcm3380.h +++ b/include/configs/bmips_bcm3380.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM3380_H */ diff --git a/include/configs/bmips_bcm6318.h b/include/configs/bmips_bcm6318.h index 508317f231..7865b9c17e 100644 --- a/include/configs/bmips_bcm6318.h +++ b/include/configs/bmips_bcm6318.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM6318_H */ diff --git a/include/configs/bmips_bcm63268.h b/include/configs/bmips_bcm63268.h index c5bda16d2b..93426d2661 100644 --- a/include/configs/bmips_bcm63268.h +++ b/include/configs/bmips_bcm63268.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM63268_H */ diff --git a/include/configs/bmips_bcm6328.h b/include/configs/bmips_bcm6328.h index 32397c26e8..e992fe6a56 100644 --- a/include/configs/bmips_bcm6328.h +++ b/include/configs/bmips_bcm6328.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM6328_H */ diff --git a/include/configs/bmips_bcm6338.h b/include/configs/bmips_bcm6338.h index 18c99727a0..224b697774 100644 --- a/include/configs/bmips_bcm6338.h +++ b/include/configs/bmips_bcm6338.h @@ -14,9 +14,9 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif -#define CONFIG_SYS_FLASH_BASE 0xbfc00000 +#define CFG_SYS_FLASH_BASE 0xbfc00000 #endif /* __CONFIG_BMIPS_BCM6338_H */ diff --git a/include/configs/bmips_bcm6348.h b/include/configs/bmips_bcm6348.h index f8d7148d49..3211d23049 100644 --- a/include/configs/bmips_bcm6348.h +++ b/include/configs/bmips_bcm6348.h @@ -14,9 +14,9 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif -#define CONFIG_SYS_FLASH_BASE 0xbfc00000 +#define CFG_SYS_FLASH_BASE 0xbfc00000 #endif /* __CONFIG_BMIPS_BCM6348_H */ diff --git a/include/configs/bmips_bcm6358.h b/include/configs/bmips_bcm6358.h index d564a32ee5..7e2449ca24 100644 --- a/include/configs/bmips_bcm6358.h +++ b/include/configs/bmips_bcm6358.h @@ -14,9 +14,9 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif -#define CONFIG_SYS_FLASH_BASE 0xbe000000 +#define CFG_SYS_FLASH_BASE 0xbe000000 #endif /* __CONFIG_BMIPS_BCM6358_H */ diff --git a/include/configs/bmips_bcm6362.h b/include/configs/bmips_bcm6362.h index f982a4363d..443ee47010 100644 --- a/include/configs/bmips_bcm6362.h +++ b/include/configs/bmips_bcm6362.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM6362_H */ diff --git a/include/configs/bmips_bcm6368.h b/include/configs/bmips_bcm6368.h index 11d623c28b..c550f97b93 100644 --- a/include/configs/bmips_bcm6368.h +++ b/include/configs/bmips_bcm6368.h @@ -14,9 +14,9 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif -#define CONFIG_SYS_FLASH_BASE 0xb8000000 +#define CFG_SYS_FLASH_BASE 0xb8000000 #endif /* __CONFIG_BMIPS_BCM6368_H */ diff --git a/include/configs/bmips_bcm6838.h b/include/configs/bmips_bcm6838.h index 30965c85bf..f212914072 100644 --- a/include/configs/bmips_bcm6838.h +++ b/include/configs/bmips_bcm6838.h @@ -14,7 +14,7 @@ /* U-Boot */ #if defined(CONFIG_BMIPS_BOOT_RAM) -#define CONFIG_SYS_INIT_SP_OFFSET SZ_8K +#define CFG_SYS_INIT_SP_OFFSET SZ_8K #endif #endif /* __CONFIG_BMIPS_BCM6838_H */ diff --git a/include/configs/bmips_common.h b/include/configs/bmips_common.h index 7e358a6314..3cdd0e47ea 100644 --- a/include/configs/bmips_common.h +++ b/include/configs/bmips_common.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> /* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 500000, 1500000 } #endif /* __CONFIG_BMIPS_COMMON_H */ diff --git a/include/configs/boston.h b/include/configs/boston.h index 0033a7fb02..14ce8a4c0f 100644 --- a/include/configs/boston.h +++ b/include/configs/boston.h @@ -27,7 +27,7 @@ # define CFG_SYS_SDRAM_BASE 0x80000000 #endif -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* * Console diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index 78b2000aa2..d35c7c4a59 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -13,7 +13,7 @@ /* -- i.mx6 specifica -- */ #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE L2_PL310_BASE +#define CFG_SYS_PL310_BASE L2_PL310_BASE #endif /* !CONFIG_SYS_L2CACHE_OFF */ #define CONFIG_MXC_GPT_HCLK @@ -77,8 +77,8 @@ BUR_COMMON_ENV \ /* RAM */ #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Ethernet */ #define CONFIG_FEC_FIXED_SPEED _1000BASET diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index f1734aaca7..3e0b425078 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -22,7 +22,7 @@ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ /* Timer information */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 6f2b8245b9..6f3396bad4 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -19,7 +19,7 @@ /* Flat Device Tree Definitions */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CFG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/ci20.h b/include/configs/ci20.h index f268dfd094..3329c24fa6 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -12,7 +12,7 @@ /* Memory configuration */ #define CFG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */ -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* NS16550-ish UARTs */ #define CFG_SYS_NS16550_CLK 48000000 diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h index eb899c4557..b1f9470d9c 100644 --- a/include/configs/cl-som-imx7.h +++ b/include/configs/cl-som-imx7.h @@ -23,8 +23,8 @@ #define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08 #define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } +#define CFG_SYS_I2C_PCA953X_ADDR 0x20 +#define CFG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } #undef CONFIG_EXTRA_ENV_SETTINGS @@ -83,8 +83,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* SPI Flash support */ diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h index 47c4aacc43..d5c0395797 100644 --- a/include/configs/cm_fx6.h +++ b/include/configs/cm_fx6.h @@ -22,8 +22,8 @@ #define PHYS_SDRAM_1 MMDC0_ARB_BASE_ADDR #define PHYS_SDRAM_2 MMDC1_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Serial console */ #define CONFIG_MXC_UART_BASE UART4_BASE @@ -139,7 +139,7 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Boot */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* misc */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index 8f058213e9..8ad1cfb5de 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -9,7 +9,7 @@ #define __CONFIG_CM_T43_H #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2GB */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> @@ -32,7 +32,7 @@ #define CONFIG_POWER_TPS65218 /* Enabling L2 Cache */ -#define CONFIG_SYS_PL310_BASE 0x48242000 +#define CFG_SYS_PL310_BASE 0x48242000 /* * Since SPL did pll and ddr initialization for us, diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 65b9074cd9..01828ea201 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -29,18 +29,18 @@ * --- */ -#define CONFIG_SYS_CLK 66000000 +#define CFG_SYS_CLK 66000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ /* --- * Define baudrate for UART1 (console output, tftp, ...) * default value of CONFIG_BAUDRATE for Sentec board: 19200 baud - * CONFIG_SYS_BAUDRATE_TABLE defines values that can be selected in u-boot command + * CFG_SYS_BAUDRATE_TABLE defines values that can be selected in u-boot command * interface * --- */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* --- * set "#if 0" to "#if 1" if (Hardware)-WATCHDOG should be enabled & change @@ -133,21 +133,21 @@ enter a valid image address in flash */ * --- */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ /* --- * System Conf. Reg. & System Protection Reg. * --- */ -#define CONFIG_SYS_SCR 0x0003 -#define CONFIG_SYS_SPR 0xffff +#define CFG_SYS_SCR 0x0003 +#define CFG_SYS_SPR 0xffff /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in internal SRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -168,28 +168,28 @@ enter a valid image address in flash */ *----------------------------------------------------------------------- */ -#define CONFIG_SYS_FLASH_BASE 0xffe00000 +#define CFG_SYS_FLASH_BASE 0xffe00000 /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -209,15 +209,15 @@ enter a valid image address in flash */ /*----------------------------------------------------------------------- * Port configuration (GPIO) */ -#define CONFIG_SYS_PACNT 0x00000000 /* PortA control reg.: All pins are external +#define CFG_SYS_PACNT 0x00000000 /* PortA control reg.: All pins are external GPIO*/ -#define CONFIG_SYS_PADDR 0x00FF /* PortA direction reg.: PA7 to PA0 are outputs +#define CFG_SYS_PADDR 0x00FF /* PortA direction reg.: PA7 to PA0 are outputs (1^=output, 0^=input) */ -#define CONFIG_SYS_PADAT LED_STAT_0 /* PortA value reg.: Turn all LED off */ -#define CONFIG_SYS_PBCNT 0x55554155 /* PortB control reg.: Ethernet/UART +#define CFG_SYS_PADAT LED_STAT_0 /* PortA value reg.: Turn all LED off */ +#define CFG_SYS_PBCNT 0x55554155 /* PortB control reg.: Ethernet/UART configuration */ -#define CONFIG_SYS_PBDDR 0x0000 /* PortB direction: All pins configured as inputs */ -#define CONFIG_SYS_PBDAT 0x0000 /* PortB value reg. */ -#define CONFIG_SYS_PDCNT 0x00000000 /* PortD control reg. */ +#define CFG_SYS_PBDDR 0x0000 /* PortB direction: All pins configured as inputs */ +#define CFG_SYS_PBDAT 0x0000 /* PortB value reg. */ +#define CFG_SYS_PDCNT 0x00000000 /* PortD control reg. */ #endif /* _CONFIG_COBRA5272_H */ diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h index ca8445a3d0..12dc946fc7 100644 --- a/include/configs/colibri-imx6ull.h +++ b/include/configs/colibri-imx6ull.h @@ -117,8 +117,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND /* NAND stuff */ diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 14278e9ca4..c6a79debd6 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -101,7 +101,7 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h index c08095561d..32a79b0255 100644 --- a/include/configs/colibri_imx7.h +++ b/include/configs/colibri_imx7.h @@ -161,8 +161,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #ifdef CONFIG_TARGET_COLIBRI_IMX7_NAND /* NAND stuff */ diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 1128307139..fa778ec9e2 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -86,8 +86,8 @@ #define PHYS_SDRAM_SIZE (256 * SZ_1M) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* USB Host Support */ diff --git a/include/configs/corvus.h b/include/configs/corvus.h index c7a3e47437..8a61086ecc 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -24,8 +24,8 @@ */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* serial console */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU @@ -63,10 +63,10 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index e2e1cfedbd..578277fc75 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -17,13 +17,13 @@ /* * SoC Configuration */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CFG_SYS_EXCEPTION_VECTORS_HIGH +#define CFG_SYS_OSCIN_FREQ 24000000 +#define CFG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CFG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_DV_NOR_BOOT_CFG (0x11) +#define CFG_SYS_DV_NOR_BOOT_CFG (0x11) #endif /* @@ -36,7 +36,7 @@ /* memtest will be run on 16MB */ -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ +#define CFG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ DAVINCI_SYSCFG_SUSPSRC_UART2 | \ @@ -47,17 +47,17 @@ * PLL configuration */ -#define CONFIG_SYS_DA850_PLL0_PLLM 24 -#define CONFIG_SYS_DA850_PLL1_PLLM 21 +#define CFG_SYS_DA850_PLL0_PLLM 24 +#define CFG_SYS_DA850_PLL1_PLLM 21 /* * DDR2 memory configuration */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ +#define CFG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ DV_DDR_PHY_EXT_STRBEN | \ (0x4 << DV_DDR_PHY_RD_LATENCY_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ +#define CFG_SYS_DA850_DDR2_SDBCR ( \ (1 << DV_DDR_SDCR_MSDRAMEN_SHIFT) | \ (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ @@ -67,9 +67,9 @@ (0x2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0 +#define CFG_SYS_DA850_DDR2_SDBCR2 0 -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ +#define CFG_SYS_DA850_DDR2_SDTIMR ( \ (14 << DV_DDR_SDTMR1_RFC_SHIFT) | \ (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ @@ -79,7 +79,7 @@ (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ (0 << DV_DDR_SDTMR1_WTR_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ +#define CFG_SYS_DA850_DDR2_SDTIMR2 ( \ (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ (0 << DV_DDR_SDTMR2_XP_SHIFT) | \ (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ @@ -88,20 +88,20 @@ (0 << DV_DDR_SDTMR2_RTP_SHIFT) | \ (0 << DV_DDR_SDTMR2_CKE_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000494 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 +#define CFG_SYS_DA850_DDR2_SDRCR 0x00000494 +#define CFG_SYS_DA850_DDR2_PBBPR 0x30 /* * Serial Driver info */ #define CFG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CFG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) /* * I2C Configuration */ -#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 +#define CFG_SYS_I2C_EXPANDER_ADDR 0x20 /* * Flash & Environment @@ -125,7 +125,7 @@ #endif #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#define CFG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE #define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */ #endif diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h index b16f3d48e3..4b31bbf4e1 100644 --- a/include/configs/dart_6ul.h +++ b/include/configs/dart_6ul.h @@ -43,8 +43,8 @@ #define PHYS_SDRAM_SIZE SZ_512M #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* USB Configs */ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index c473f3d86e..66aa6d5c3c 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -29,8 +29,8 @@ /* * NOR Flash */ -#define CONFIG_SYS_FLASH_BASE EMC_CS0_BASE -#define CONFIG_SYS_FLASH_SIZE SZ_4M +#define CFG_SYS_FLASH_BASE EMC_CS0_BASE +#define CFG_SYS_FLASH_SIZE SZ_4M /* * NAND controller diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index ddc436d501..f9b3d19480 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -73,8 +73,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment */ diff --git a/include/configs/display5.h b/include/configs/display5.h index 0a7428b02c..7636d2869a 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -30,9 +30,9 @@ */ /* Below values are "dummy" - only to avoid build break */ -#define CONFIG_SYS_SPI_KERNEL_OFFS 0x150000 -#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 -#define CONFIG_SYS_SPI_ARGS_SIZE 0x10000 +#define CFG_SYS_SPI_KERNEL_OFFS 0x150000 +#define CFG_SYS_SPI_ARGS_OFFS 0x140000 +#define CFG_SYS_SPI_ARGS_SIZE 0x10000 #define CONFIG_MXC_UART_BASE UART5_BASE @@ -285,8 +285,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* ENV config */ #ifdef CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index bb335a0a47..8217712e39 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -63,9 +63,9 @@ * 0x1E0000 - 0x9E0000 : QSPI.kernel (8MiB) * 0x9E0000 - 0x2000000 : USERLAND */ -#define CONFIG_SYS_SPI_KERNEL_OFFS 0x1E0000 -#define CONFIG_SYS_SPI_ARGS_OFFS 0x140000 -#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 +#define CFG_SYS_SPI_KERNEL_OFFS 0x1E0000 +#define CFG_SYS_SPI_ARGS_OFFS 0x140000 +#define CFG_SYS_SPI_ARGS_SIZE 0x80000 /* SPI SPL */ @@ -87,8 +87,8 @@ /* Parallel NOR Support */ #if defined(CONFIG_NOR) /* NOR: device related configs */ -#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ -#define CONFIG_SYS_FLASH_BASE (0x08000000) +#define CFG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */ +#define CFG_SYS_FLASH_BASE (0x08000000) /* Reduce SPL size by removing unlikey targets */ #endif /* NOR support */ diff --git a/include/configs/draak.h b/include/configs/draak.h index 8bfba78dc8..8140bc469c 100644 --- a/include/configs/draak.h +++ b/include/configs/draak.h @@ -14,7 +14,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } +#define CFG_SYS_WRITE_SWAPPED_DATA #endif /* __DRAAK_H */ diff --git a/include/configs/dragonboard845c.h b/include/configs/dragonboard845c.h index 677a485623..bd88c42a3b 100644 --- a/include/configs/dragonboard845c.h +++ b/include/configs/dragonboard845c.h @@ -11,7 +11,7 @@ #include <linux/sizes.h> #include <asm/arch/sysmap-sdm845.h> -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } +#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x5000000\0" \ diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index 80de73d15d..426155dbdb 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -12,7 +12,7 @@ * High Level Configuration Options (easy to change) * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */ @@ -27,18 +27,18 @@ * Environment is in the second sector of the first 256k of flash * *----------------------------------------------------------------------*/ -/*#define CONFIG_SYS_DRAM_TEST 1 */ -#undef CONFIG_SYS_DRAM_TEST +/*#define CFG_SYS_DRAM_TEST 1 */ +#undef CFG_SYS_DRAM_TEST /*----------------------------------------------------------------------* * Clock and PLL Configuration * *----------------------------------------------------------------------*/ -#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */ +#define CFG_SYS_CLK 80000000 /* 8MHz * 8 */ /* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */ -#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ -#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ +#define CFG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */ +#define CFG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */ /*----------------------------------------------------------------------* * Network * @@ -54,14 +54,14 @@ * You should know what you are doing if you make changes here. *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) *-----------------------------------------------------------------------*/ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -79,34 +79,34 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE -#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000 -#define CONFIG_SYS_INT_FLASH_ENABLE 0x21 +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE +#define CFG_SYS_INT_FLASH_BASE 0xF0000000 +#define CFG_SYS_INT_FLASH_ENABLE 0x21 -#define CONFIG_SYS_FLASH_SIZE 16*1024*1024 +#define CFG_SYS_FLASH_SIZE 16*1024*1024 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \ CF_CACR_CEIB | CF_CACR_DBWE | \ CF_CACR_EUSP) @@ -114,36 +114,36 @@ * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xFF000000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x00FF0001 +#define CFG_SYS_CS0_BASE 0xFF000000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x00FF0001 -#define CONFIG_SYS_CS2_BASE 0xE0000000 -#define CONFIG_SYS_CS2_CTRL 0x00001980 -#define CONFIG_SYS_CS2_MASK 0x000F0001 +#define CFG_SYS_CS2_BASE 0xE0000000 +#define CFG_SYS_CS2_CTRL 0x00001980 +#define CFG_SYS_CS2_MASK 0x000F0001 -#define CONFIG_SYS_CS3_BASE 0xE0100000 -#define CONFIG_SYS_CS3_CTRL 0x00001980 -#define CONFIG_SYS_CS3_MASK 0x000F0001 +#define CFG_SYS_CS3_BASE 0xE0100000 +#define CFG_SYS_CS3_CTRL 0x00001980 +#define CFG_SYS_CS3_MASK 0x000F0001 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ -#define CONFIG_SYS_PADDR 0x0000000 -#define CONFIG_SYS_PADAT 0x0000000 +#define CFG_SYS_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_SYS_PADDR 0x0000000 +#define CFG_SYS_PADAT 0x0000000 -#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ -#define CONFIG_SYS_PBDDR 0x0000000 -#define CONFIG_SYS_PBDAT 0x0000000 +#define CFG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_SYS_PBDDR 0x0000000 +#define CFG_SYS_PBDAT 0x0000000 -#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */ -#define CONFIG_SYS_PASPAR 0x0F0F -#define CONFIG_SYS_PEHLPAR 0xC0 -#define CONFIG_SYS_PUAPAR 0x0F -#define CONFIG_SYS_DDRUA 0x05 -#define CONFIG_SYS_PJPAR 0xFF +#define CFG_SYS_PASPAR 0x0F0F +#define CFG_SYS_PEHLPAR 0xC0 +#define CFG_SYS_PUAPAR 0x0F +#define CFG_SYS_DDRUA 0x05 +#define CFG_SYS_PJPAR 0xFF /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/ebisu.h b/include/configs/ebisu.h index 597efd6745..d1882a9646 100644 --- a/include/configs/ebisu.h +++ b/include/configs/ebisu.h @@ -16,7 +16,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } +#define CFG_SYS_WRITE_SWAPPED_DATA #endif /* __EBISU_H */ diff --git a/include/configs/edison.h b/include/configs/edison.h index b05141ad64..455a889b64 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -10,6 +10,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_STACK_SIZE (32 * 1024) +#define CFG_SYS_STACK_SIZE (32 * 1024) #endif diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h index d24bc56f34..141f9913e6 100644 --- a/include/configs/el6x_common.h +++ b/include/configs/el6x_common.h @@ -51,8 +51,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index e39bb94314..29b7748e78 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -28,8 +28,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/etamin.h b/include/configs/etamin.h index 6cae663cb8..6647148c96 100644 --- a/include/configs/etamin.h +++ b/include/configs/etamin.h @@ -16,7 +16,7 @@ /* NAND specific changes for etamin due to different page size */ #undef CFG_SYS_NAND_ECCPOS -#define CONFIG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ +#define CFG_SYS_ENV_SECT_SIZE (512 << 10) /* 512 KiB */ #define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index 97a8ffb4f6..52eb0be676 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -18,19 +18,19 @@ /* CPU information */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ /* 32kB internal SRAM */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000 /*AT91SAM9XE_SRAM_BASE */ -#define CONFIG_SYS_INIT_RAM_SIZE (32 << 10) +#define CFG_SYS_INIT_RAM_ADDR 0x00300000 /*AT91SAM9XE_SRAM_BASE */ +#define CFG_SYS_INIT_RAM_SIZE (32 << 10) /* 128MB SDRAM in 1 bank */ #define CFG_SYS_SDRAM_BASE 0x20000000 #define CFG_SYS_SDRAM_SIZE (128 << 20) /* 512kB on-chip NOR flash */ -# define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ +# define CFG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ /* bootstrap + u-boot + env + linux in dataflash on CS0 */ @@ -53,16 +53,16 @@ /* MMC */ #ifdef CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 +#define CFG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 #endif /* RTC */ #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#define CFG_SYS_I2C_RTC_ADDR 0x51 #endif /* I2C */ -#define CONFIG_SYS_MAX_I2C_BUS 1 +#define CFG_SYS_MAX_I2C_BUS 1 #define I2C_SOFT_DECLARATIONS diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index cd6cb062ec..bec1660cf4 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -11,7 +11,7 @@ #include <configs/aspeed-common.h> -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* Misc */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index ecd05fe15c..c9c988b937 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -8,7 +8,7 @@ #include <configs/aspeed-common.h> -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* Misc */ #define STR_HELPER(s) #s diff --git a/include/configs/exynos5-dt-common.h b/include/configs/exynos5-dt-common.h index a94f5a15f0..c9e0c13172 100644 --- a/include/configs/exynos5-dt-common.h +++ b/include/configs/exynos5-dt-common.h @@ -15,7 +15,7 @@ "stdout=serial,vidconsole\0" \ "stderr=serial,vidconsole\0" -#define CONFIG_SYS_SPI_BASE 0x12D30000 +#define CFG_SYS_SPI_BASE 0x12D30000 #define FLASH_SIZE (4 << 20) #define CONFIG_SPI_BOOTING diff --git a/include/configs/exynos78x0-common.h b/include/configs/exynos78x0-common.h index 68c36dc2fd..8672b9e952 100644 --- a/include/configs/exynos78x0-common.h +++ b/include/configs/exynos78x0-common.h @@ -18,7 +18,7 @@ #define CPU_RELEASE_ADDR secondary_boot_addr -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600} #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index f5353ec79a..89e531649a 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -14,8 +14,8 @@ #endif /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 @@ -32,10 +32,10 @@ /* SPL */ -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #define CFG_SYS_NAND_U_BOOT_SIZE 0xa0000 #define CFG_SYS_NAND_U_BOOT_START CONFIG_TEXT_BASE diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index a755714440..0ba4efe67a 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -9,14 +9,14 @@ /* RAM */ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) @@ -25,7 +25,7 @@ #endif /* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600 } /* RAM */ diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 6cdfe8c4c3..36dcee87c5 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -14,7 +14,7 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ /* TODO: Check: Can this be unified with CFG_SYS_SDRAM_BASE? */ -#define CONFIG_SYS_DDR_SDRAM_BASE CFG_SYS_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE CFG_SYS_SDRAM_BASE /* * Memory test @@ -28,16 +28,16 @@ /* * Initial RAM Base Address Setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ /* * FLASH on the Local Bus */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ -#define CONFIG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ +#define CFG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ +#define CFG_SYS_FLASH_SIZE 8 /* FLASH size is up to 8M */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} /* @@ -49,7 +49,7 @@ * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ /* * Environment Configuration diff --git a/include/configs/ge_b1x5v2.h b/include/configs/ge_b1x5v2.h index 85ceaf8ccb..97fe76cfa8 100644 --- a/include/configs/ge_b1x5v2.h +++ b/include/configs/ge_b1x5v2.h @@ -38,8 +38,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Command definition */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index 1dba2e92fb..cbaf03c2a2 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -92,11 +92,11 @@ /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index fe00272a1b..b855bbc25f 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -54,8 +54,8 @@ /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* * MTD Command for mtdparts diff --git a/include/configs/highbank.h b/include/configs/highbank.h index 0d281a3379..4aef0b4abd 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -6,7 +6,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) +#define CFG_SYS_BOOTMAPSZ (16 << 20) #define CONFIG_PL011_CLOCK 150000000 diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 775f166f1d..c5ef2f99b0 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -26,7 +26,7 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xf6801000 diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h index 914c3ad9ef..fad1f98048 100644 --- a/include/configs/hikey960.h +++ b/include/configs/hikey960.h @@ -18,7 +18,7 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Generic Interrupt Controller Definitions */ #define GICD_BASE 0xe82b1000 diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index fcb2dec54e..59ea896007 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -21,8 +21,8 @@ * Memory configuration */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE SZ_1G /* diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 0ae935208c..fbfcded471 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -20,8 +20,8 @@ * Memory configuration */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE SZ_1G /* diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 594aa4f75e..b0abd54882 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -80,7 +80,7 @@ /* CS2 Base address */ #define PHYS_FLASH_1 0xc0000000 /* Flash Base for U-Boot */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 /* Address and size of Redundant Environment Sector */ /* diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h index d4e2583ee8..1f30798550 100644 --- a/include/configs/imx6-engicam.h +++ b/include/configs/imx6-engicam.h @@ -110,8 +110,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* UART */ #ifdef CONFIG_MXC_UART diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h index 1b08c5e9a7..4e23f1a2dc 100644 --- a/include/configs/imx6_logic.h +++ b/include/configs/imx6_logic.h @@ -106,8 +106,8 @@ /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h index a074df5829..402f83c18e 100644 --- a/include/configs/imx6dl-mamoj.h +++ b/include/configs/imx6dl-mamoj.h @@ -56,7 +56,7 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif /* __IMX6DL_MAMOJ_CONFIG_H */ diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h index 855af29ec9..99da081cda 100644 --- a/include/configs/imx6q-bosch-acc.h +++ b/include/configs/imx6q-bosch-acc.h @@ -86,8 +86,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* SPL */ #ifdef CONFIG_SPL diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h index 0a688afe6c..2d9d3c34b0 100644 --- a/include/configs/imx6ulz_smm_m2.h +++ b/include/configs/imx6ulz_smm_m2.h @@ -64,8 +64,8 @@ #define PHYS_SDRAM_SIZE SZ_128M #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ diff --git a/include/configs/imx7-cm.h b/include/configs/imx7-cm.h index e5118f1158..76771fd66c 100644 --- a/include/configs/imx7-cm.h +++ b/include/configs/imx7-cm.h @@ -70,8 +70,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* MMC Config*/ #define CFG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index e62f9c5462..c228cf7f37 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -11,7 +11,7 @@ #include <asm/arch/imx-regs.h> #include <config_distro_bootcmd.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -123,8 +123,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 143da00110..03325e6c3a 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -71,8 +71,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h index c7669305f5..80321cf2d8 100644 --- a/include/configs/imx8mm_data_modul_edm_sbc.h +++ b/include/configs/imx8mm_data_modul_edm_sbc.h @@ -18,8 +18,8 @@ #endif /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 9937071874..8a694c88a5 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -15,10 +15,10 @@ #define UBOOT_ITB_OFFSET_FSPI \ (UBOOT_ITB_OFFSET + FSPI_CONF_BLOCK_SIZE) #ifdef CONFIG_FSPI_CONF_HEADER -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + UBOOT_ITB_OFFSET_FSPI) #else -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #endif @@ -53,8 +53,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index cd47d842ff..41ab930779 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -10,7 +10,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -38,8 +38,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index 58e165c35a..28ce834769 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -9,7 +9,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -29,8 +29,8 @@ "splblk=0x42\0" \ BOOTENV -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index f532c1052f..85fd5e2371 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) /* Initial environment variables */ @@ -75,8 +75,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mn_bsh_smm_s2_common.h b/include/configs/imx8mn_bsh_smm_s2_common.h index 415248eadf..204fc4b316 100644 --- a/include/configs/imx8mn_bsh_smm_s2_common.h +++ b/include/configs/imx8mn_bsh_smm_s2_common.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #define MEM_LAYOUT_ENV_SETTINGS \ @@ -23,8 +23,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_512K #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index 8857bc7c59..024b86c7f1 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #define BOOT_TARGET_DEVICES(func) \ @@ -45,8 +45,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mn_var_som.h b/include/configs/imx8mn_var_som.h index 628bb5813f..4633843d1b 100644 --- a/include/configs/imx8mn_var_som.h +++ b/include/configs/imx8mn_var_som.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #define BOOT_TARGET_DEVICES(func) \ @@ -43,8 +43,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_512K #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mn_venice.h b/include/configs/imx8mn_venice.h index a169be35a4..a585cbf87e 100644 --- a/include/configs/imx8mn_venice.h +++ b/include/configs/imx8mn_venice.h @@ -9,7 +9,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) /* Enable Distro Boot */ @@ -23,8 +23,8 @@ "splblk=0x40\0" \ BOOTENV -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mp_dhcom_pdk2.h b/include/configs/imx8mp_dhcom_pdk2.h index 62bcef5eec..5443022b04 100644 --- a/include/configs/imx8mp_dhcom_pdk2.h +++ b/include/configs/imx8mp_dhcom_pdk2.h @@ -11,8 +11,8 @@ #include <asm/arch/imx-regs.h> /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index d394762e3b..738677ff37 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -50,8 +50,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 /* Totally 2GB DDR */ diff --git a/include/configs/imx8mp_icore_mx8mp.h b/include/configs/imx8mp_icore_mx8mp.h index 3e995c9721..d67bad8971 100644 --- a/include/configs/imx8mp_icore_mx8mp.h +++ b/include/configs/imx8mp_icore_mx8mp.h @@ -11,7 +11,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/ @@ -52,8 +52,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 /* Totally 2GB DDR */ #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h index 1943a24b79..58f7dc6518 100644 --- a/include/configs/imx8mp_rsb3720.h +++ b/include/configs/imx8mp_rsb3720.h @@ -12,7 +12,7 @@ #include <asm/arch/imx-regs.h> #include <config_distro_bootcmd.h> -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) /* GUIDs for capsule updatable firmware images */ #define IMX8MP_RSB3720A1_4G_FIT_IMAGE_GUID \ @@ -131,8 +131,8 @@ "fi;\0" /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 /* Totally 6GB or 4G DDR */ diff --git a/include/configs/imx8mp_venice.h b/include/configs/imx8mp_venice.h index 7d360583c4..e79aa57075 100644 --- a/include/configs/imx8mp_venice.h +++ b/include/configs/imx8mp_venice.h @@ -9,7 +9,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) /* Enable Distro Boot */ @@ -23,8 +23,8 @@ "splblk=0x40\0" \ BOOTENV -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index 271376cb9f..4df98e3f37 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -46,8 +46,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index 672a9fa7a3..aa29e7884f 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -52,8 +52,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index dd354b0265..3b4cd65622 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -84,8 +84,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index fe27ac36a3..2e2e5ed43c 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CFG_SYS_FSL_ESDHC_ADDR 0 #define USDHC1_BASE_ADDR 0x5B010000 #define USDHC2_BASE_ADDR 0x5B020000 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 592df2795b..d313bdc2a4 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -9,7 +9,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD #define CONFIG_MALLOC_F_ADDR 0x22040000 @@ -50,8 +50,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index 077a4d843d..895c50f602 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -124,8 +124,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 #define CFG_SYS_SDRAM_BASE 0x80000000 #define PHYS_SDRAM 0x80000000 diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index a2c004880a..e180387c68 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -22,6 +22,6 @@ * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_UBOOT_START 0x800023FD +#define CFG_SYS_UBOOT_START 0x800023FD #endif /* __IMXRT1020_EVK_H */ diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index d1a7dab37c..84228676c7 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -29,6 +29,6 @@ * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_UBOOT_START 0x800023FD +#define CFG_SYS_UBOOT_START 0x800023FD #endif /* __IMXRT1050_EVK_H */ diff --git a/include/configs/imxrt1170-evk.h b/include/configs/imxrt1170-evk.h index 2459fe24e2..f83429082a 100644 --- a/include/configs/imxrt1170-evk.h +++ b/include/configs/imxrt1170-evk.h @@ -23,7 +23,7 @@ #define DMAMEM_BASE (PHYS_SDRAM + PHYS_SDRAM_SIZE - \ DMAMEM_SZ_ALL) /* For SPL */ -#define CONFIG_SYS_UBOOT_START 0x202403FD +#define CFG_SYS_UBOOT_START 0x202403FD /* For SPL ends */ #endif /* __IMXRT1170_EVK_H */ diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 8d0458d1d6..7a55c6aeef 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -6,7 +6,7 @@ * Common ARM Integrator configuration settings */ -#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ +#define CFG_SYS_TIMERBASE 0x13000100 /* Timer1 */ /* * The ARM boot monitor initializes the board. @@ -41,6 +41,6 @@ * - SIB block * - U-Boot environment */ -#define CONFIG_SYS_FLASH_BASE 0x24000000 +#define CFG_SYS_FLASH_BASE 0x24000000 /* Timeout values in ticks */ diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h index c8457d9716..6bee098d6a 100644 --- a/include/configs/integratorap.h +++ b/include/configs/integratorap.h @@ -17,10 +17,10 @@ #include "integrator-common.h" /* Integrator/AP-specific configuration */ -#define CONFIG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ +#define CFG_SYS_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */ /* Flash settings */ -#define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ +#define CFG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ /*----------------------------------------------------------------------- * PCI definitions diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index bf09510d02..25bb41ebc4 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -17,7 +17,7 @@ #include "integrator-common.h" /* Integrator CP-specific configuration */ -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */ #define CONFIG_SERVERIP 192.168.1.100 #define CONFIG_IPADDR 192.168.1.104 diff --git a/include/configs/j721e_evm.h b/include/configs/j721e_evm.h index 2a0b0c7163..e66f994a37 100644 --- a/include/configs/j721e_evm.h +++ b/include/configs/j721e_evm.h @@ -18,14 +18,14 @@ /* DDR Configuration */ #define CFG_SYS_SDRAM_BASE1 0x880000000 /* FLASH Configuration */ -#define CONFIG_SYS_FLASH_BASE 0x000000000 +#define CFG_SYS_FLASH_BASE 0x000000000 /* SPL Loader Configuration */ #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) -#define CONFIG_SYS_UBOOT_BASE 0x50280000 +#define CFG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else -#define CONFIG_SYS_UBOOT_BASE 0x50080000 +#define CFG_SYS_UBOOT_BASE 0x50080000 #endif /* HyperFlash related configuration */ diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h index e690ef9590..ab204c62b7 100644 --- a/include/configs/j721s2_evm.h +++ b/include/configs/j721s2_evm.h @@ -21,10 +21,10 @@ /* SPL Loader Configuration */ #if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM) -#define CONFIG_SYS_UBOOT_BASE 0x50280000 +#define CFG_SYS_UBOOT_BASE 0x50280000 /* Image load address in RAM for DFU boot*/ #else -#define CONFIG_SYS_UBOOT_BASE 0x50080000 +#define CFG_SYS_UBOOT_BASE 0x50080000 #endif /* U-Boot general configuration */ diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 35cf27a2eb..cc5ec219b8 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -13,7 +13,7 @@ * Miscellaneous configurable options */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS #define CONFIG_KM_DEF_ENV_BOOTPARAMS \ diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h index 888bb2981f..f64c0eee1b 100644 --- a/include/configs/km/km-mpc832x.h +++ b/include/configs/km/km-mpc832x.h @@ -1,34 +1,34 @@ /* * System IO Config */ -#define CONFIG_SYS_SICRL SICRL_IRQ_CKS +#define CFG_SYS_SICRL SICRL_IRQ_CKS -#define CONFIG_SYS_DDRCDR (\ +#define CFG_SYS_DDRCDR (\ DDRCDR_EN | \ DDRCDR_PZ_MAXZ | \ DDRCDR_NZ_MAXZ | \ DDRCDR_M_ODR) -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ +#define CFG_SYS_DDR_CS0_BNDS 0x0000007f +#define CFG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ SDRAM_CFG_32_BE | \ SDRAM_CFG_SREN | \ SDRAM_CFG_HSE) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ +#define CFG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CFG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CFG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ +#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ CSCONFIG_ODT_WR_CFG | \ CSCONFIG_ROW_BIT_13 | \ CSCONFIG_COL_BIT_10) -#define CONFIG_SYS_DDR_MODE 0x47860242 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 +#define CFG_SYS_DDR_MODE 0x47860242 +#define CFG_SYS_DDR_MODE2 0x8080c000 -#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ +#define CFG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ @@ -37,7 +37,7 @@ (0 << TIMING_CFG0_WRT_SHIFT) | \ (0 << TIMING_CFG0_RWT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ +#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ (2 << TIMING_CFG1_WRTORD_SHIFT) | \ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ (3 << TIMING_CFG1_WRREC_SHIFT) | \ @@ -46,7 +46,7 @@ (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ (3 << TIMING_CFG1_PRETOACT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ +#define CFG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ @@ -54,7 +54,7 @@ (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ (5 << TIMING_CFG2_CPO_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CFG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 +#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CFG_SYS_KMBEC_FPGA_SIZE 128 diff --git a/include/configs/km/km-mpc8360.h b/include/configs/km/km-mpc8360.h index fb43fb81bc..5c9f912383 100644 --- a/include/configs/km/km-mpc8360.h +++ b/include/configs/km/km-mpc8360.h @@ -1,6 +1,6 @@ /* KMBEC FPGA (PRIO) */ -#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 64 +#define CFG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CFG_SYS_KMBEC_FPGA_SIZE 64 /* * High Level Configuration Options @@ -9,34 +9,34 @@ /* * System IO Setup */ -#define CONFIG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) +#define CFG_SYS_SICRH (SICRH_UC1EOBI | SICRH_UC2E1OBI) /** * DDR RAM settings */ -#define CONFIG_SYS_DDR_SDRAM_CFG (\ +#define CFG_SYS_DDR_SDRAM_CFG (\ SDRAM_CFG_SDRAM_TYPE_DDR2 | \ SDRAM_CFG_SREN | \ SDRAM_CFG_HSE) -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CFG_SYS_DDR_SDRAM_CFG2 0x00401000 -#define CONFIG_SYS_DDR_CLK_CNTL (\ +#define CFG_SYS_DDR_CLK_CNTL (\ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) -#define CONFIG_SYS_DDR_INTERVAL (\ +#define CFG_SYS_DDR_INTERVAL (\ (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ (0x203 << SDRAM_INTERVAL_REFINT_SHIFT)) -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f +#define CFG_SYS_DDR_CS0_BNDS 0x0000007f -#define CONFIG_SYS_DDRCDR (\ +#define CFG_SYS_DDRCDR (\ DDRCDR_EN | \ DDRCDR_Q_DRN) -#define CONFIG_SYS_DDR_MODE 0x47860452 -#define CONFIG_SYS_DDR_MODE2 0x8080c000 +#define CFG_SYS_DDR_MODE 0x47860452 +#define CFG_SYS_DDR_MODE2 0x8080c000 -#define CONFIG_SYS_DDR_TIMING_0 (\ +#define CFG_SYS_DDR_TIMING_0 (\ (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ @@ -46,7 +46,7 @@ (0 << TIMING_CFG0_WRT_SHIFT) | \ (0 << TIMING_CFG0_RWT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ +#define CFG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \ (2 << TIMING_CFG1_WRTORD_SHIFT) | \ (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ (3 << TIMING_CFG1_WRREC_SHIFT) | \ @@ -55,7 +55,7 @@ (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ (3 << TIMING_CFG1_PRETOACT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_2 (\ +#define CFG_SYS_DDR_TIMING_2 (\ (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \ (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ @@ -64,11 +64,11 @@ (5 << TIMING_CFG2_CPO_SHIFT) | \ (0 << TIMING_CFG2_ADD_LAT_SHIFT)) -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 +#define CFG_SYS_DDR_TIMING_3 0x00000000 /* EEprom support */ /* * PAXE on the local bus CS3 */ -#define CONFIG_SYS_PAXE_BASE 0xA0000000 +#define CFG_SYS_PAXE_BASE 0xA0000000 diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index db1daee136..e6a3613b7a 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -9,7 +9,7 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 /* DDR is system memory */ -#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ +#define CFG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) #define CFG_83XX_DDR_USES_CS0 @@ -22,15 +22,15 @@ /* * The reserved memory */ -#define CONFIG_SYS_FLASH_BASE 0xF0000000 +#define CFG_SYS_FLASH_BASE 0xF0000000 /* Reserve 768 kB for Mon */ /* * Initial RAM Base Address Setup */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in RAM */ /* * Init Local Bus Memory Controller: * @@ -44,21 +44,21 @@ /* * FLASH on the Local Bus */ -#define CONFIG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ +#define CFG_SYS_FLASH_SIZE 256 /* max FLASH size is 256M */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } /* I2C */ #define CFG_SYS_NUM_I2C_BUSES 4 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ +#define CFG_SYS_I2C_MAX_HOPS 1 +#define CFG_SYS_I2C_BUSES {{0, {I2C_NULL_HOP} }, \ {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ {1, {I2C_NULL_HOP} } } #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 -#define CFG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE +#define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE #endif /* @@ -66,7 +66,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* * Environment diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index b5913ed700..7307c495c3 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -9,8 +9,8 @@ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + \ CONFIG_KM_PHRAM + \ @@ -19,24 +19,24 @@ #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define SPD_EEPROM_ADDRESS 0x54 /* POST memory regions test */ -#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) +#define CONFIG_POST (CFG_SYS_POST_MEM_REGIONS) #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* * IFC Definitions */ /* NOR Flash Definitions */ -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE 0x60000000 +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_TE | \ CSPR_MSEL_NOR | \ @@ -63,18 +63,18 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 /* NAND Flash Definitions */ #define CFG_SYS_NAND_BASE 0x68000000 @@ -110,40 +110,40 @@ FTIM2_NAND_TWHRE(0x3c)) #define CFG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e)) -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } /* QRIO FPGA Definitions */ -#define CONFIG_SYS_QRIO_BASE 0x70000000 -#define CONFIG_SYS_QRIO_BASE_PHYS CONFIG_SYS_QRIO_BASE +#define CFG_SYS_QRIO_BASE 0x70000000 +#define CFG_SYS_QRIO_BASE_PHYS CFG_SYS_QRIO_BASE -#define CONFIG_SYS_CSPR2_EXT (0x00) -#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \ +#define CFG_SYS_CSPR2_EXT (0x00) +#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_QRIO_BASE) | \ CSPR_PORT_SIZE_8 | \ CSPR_TE | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_AMASK2 IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) | \ +#define CFG_SYS_AMASK2 IFC_AMASK(64 * 1024) +#define CFG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) | \ CSOR_GPCM_TRHZ_20 | \ CSOR_GPCM_BCTLD) -#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \ +#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \ FTIM0_GPCM_TEADC(0x8) | \ FTIM0_GPCM_TEAHC(0x2)) -#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ +#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ FTIM1_GPCM_TRAD(0x6)) -#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) | \ +#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) | \ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x7)) -#define CONFIG_SYS_CS2_FTIM3 0x04000000 +#define CFG_SYS_CS2_FTIM3 0x04000000 /* * Serial Port @@ -155,11 +155,11 @@ */ #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CFG_SYS_I2C_MAX_HOPS 1 #define CFG_SYS_NUM_I2C_BUSES 3 #define I2C_MUX_PCA_ADDR 0x70 #define I2C_MUX_CH_DEFAULT 0x0 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ +#define CFG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ {1, {I2C_NULL_HOP} }, \ } @@ -205,12 +205,12 @@ __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ " +${filesize}\0" \ - "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ + "update-nor=protect off " __stringify(CFG_SYS_FLASH_BASE) \ " +${filesize} && " \ - "erase " __stringify(CONFIG_SYS_FLASH_BASE) \ + "erase " __stringify(CFG_SYS_FLASH_BASE) \ " +${filesize} && " \ "cp.b ${load_addr_r} " \ - __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \ + __stringify(CFG_SYS_FLASH_BASE) " ${filesize} && " \ "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ " +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0" \ "set_fdthigh=true\0" \ @@ -238,6 +238,6 @@ "ethrotate=no\0" \ "" -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */ #endif diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index dbf038cefa..e152714b11 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -25,10 +25,10 @@ #define SYS_LAWAPP_BASE_PHYS (0xf00000000ull | SYS_LAWAPP_BASE) /* Application IFC CS4 MRAM */ -#define CONFIG_SYS_MRAM_BASE SYS_LAWAPP_BASE +#define CFG_SYS_MRAM_BASE SYS_LAWAPP_BASE #define SYS_MRAM_BASE_PHYS SYS_LAWAPP_BASE_PHYS #define SYS_MRAM_CSPR_EXT (0x0f) -#define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_MRAM_BASE) | \ +#define SYS_MRAM_CSPR (CSPR_PHYS_ADDR(CFG_SYS_MRAM_BASE) | \ CSPR_PORT_SIZE_8 | /* 8 bit */ \ CSPR_MSEL_GPCM | /* msel = gpcm */ \ CSPR_V /* bank is valid */) @@ -44,14 +44,14 @@ FTIM2_GPCM_TCH(0x2) | \ FTIM2_GPCM_TWP(0x8)) #define SYS_MRAM_FTIM3 0x04000000 -#define CONFIG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT -#define CONFIG_SYS_CSPR4 SYS_MRAM_CSPR -#define CONFIG_SYS_AMASK4 SYS_MRAM_AMASK -#define CONFIG_SYS_CSOR4 SYS_MRAM_CSOR -#define CONFIG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0 -#define CONFIG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1 -#define CONFIG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2 -#define CONFIG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3 +#define CFG_SYS_CSPR4_EXT SYS_MRAM_CSPR_EXT +#define CFG_SYS_CSPR4 SYS_MRAM_CSPR +#define CFG_SYS_AMASK4 SYS_MRAM_AMASK +#define CFG_SYS_CSOR4 SYS_MRAM_CSOR +#define CFG_SYS_CS4_FTIM0 SYS_MRAM_FTIM0 +#define CFG_SYS_CS4_FTIM1 SYS_MRAM_FTIM1 +#define CFG_SYS_CS4_FTIM2 SYS_MRAM_FTIM2 +#define CFG_SYS_CS4_FTIM3 SYS_MRAM_FTIM3 /* Application IFC CS6: BFTIC */ #define SYS_BFTIC_BASE 0xd0000000 @@ -73,20 +73,20 @@ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x12)) #define SYS_BFTIC_FTIM3 0x04000000 -#define CONFIG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT -#define CONFIG_SYS_CSPR6 SYS_BFTIC_CSPR -#define CONFIG_SYS_AMASK6 SYS_BFTIC_AMASK -#define CONFIG_SYS_CSOR6 SYS_BFTIC_CSOR -#define CONFIG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0 -#define CONFIG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1 -#define CONFIG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2 -#define CONFIG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3 +#define CFG_SYS_CSPR6_EXT SYS_BFTIC_CSPR_EXT +#define CFG_SYS_CSPR6 SYS_BFTIC_CSPR +#define CFG_SYS_AMASK6 SYS_BFTIC_AMASK +#define CFG_SYS_CSOR6 SYS_BFTIC_CSOR +#define CFG_SYS_CS6_FTIM0 SYS_BFTIC_FTIM0 +#define CFG_SYS_CS6_FTIM1 SYS_BFTIC_FTIM1 +#define CFG_SYS_CS6_FTIM2 SYS_BFTIC_FTIM2 +#define CFG_SYS_CS6_FTIM3 SYS_BFTIC_FTIM3 /* Application IFC CS7 PAXE */ -#define CONFIG_SYS_PAXE_BASE 0xd8000000 -#define SYS_PAXE_BASE_PHYS (0xf00000000ull | CONFIG_SYS_PAXE_BASE) +#define CFG_SYS_PAXE_BASE 0xd8000000 +#define SYS_PAXE_BASE_PHYS (0xf00000000ull | CFG_SYS_PAXE_BASE) #define SYS_PAXE_CSPR_EXT (0x0f) -#define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_PAXE_BASE) | \ +#define SYS_PAXE_CSPR (CSPR_PHYS_ADDR(CFG_SYS_PAXE_BASE) | \ CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ CSPR_MSEL_GPCM | /* MSEL = GPCM */\ CSPR_V) /* valid */ @@ -102,14 +102,14 @@ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x12)) #define SYS_PAXE_FTIM3 0x04000000 -#define CONFIG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT -#define CONFIG_SYS_CSPR7 SYS_PAXE_CSPR -#define CONFIG_SYS_AMASK7 SYS_PAXE_AMASK -#define CONFIG_SYS_CSOR7 SYS_PAXE_CSOR -#define CONFIG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0 -#define CONFIG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1 -#define CONFIG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2 -#define CONFIG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3 +#define CFG_SYS_CSPR7_EXT SYS_PAXE_CSPR_EXT +#define CFG_SYS_CSPR7 SYS_PAXE_CSPR +#define CFG_SYS_AMASK7 SYS_PAXE_AMASK +#define CFG_SYS_CSOR7 SYS_PAXE_CSOR +#define CFG_SYS_CS7_FTIM0 SYS_PAXE_FTIM0 +#define CFG_SYS_CS7_FTIM1 SYS_PAXE_FTIM1 +#define CFG_SYS_CS7_FTIM2 SYS_PAXE_FTIM2 +#define CFG_SYS_CS7_FTIM3 SYS_PAXE_FTIM3 /* PRST */ #define KM_BFTIC4_RST 0 @@ -145,25 +145,25 @@ /* * These can be toggled for performance analysis, otherwise use default. */ -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CFG_SYS_INIT_L2CSR0 L2CSR0_L2E /* POST memory regions test */ -#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS +#define CONFIG_POST CFG_SYS_POST_MEM_REGIONS /* * Config the L3 Cache as L3 SRAM */ -#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 +#define CFG_SYS_INIT_L3_ADDR 0xFFFC0000 -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#define CFG_SYS_DCSRBAR 0xf0000000 +#define CFG_SYS_DCSRBAR_PHYS 0xf00000000ull /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define SPD_EEPROM_ADDRESS 0x54 #define CFG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ @@ -189,12 +189,12 @@ * IFC Definitions */ /* NOR flash on IFC CS0 */ -#define CONFIG_SYS_FLASH_BASE 0xe8000000 -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \ - CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE 0xe8000000 +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | \ + CFG_SYS_FLASH_BASE) #define CFG_SYS_NOR_CSPR_EXT (0x0f) -#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE) | \ +#define CFG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE) | \ CSPR_PORT_SIZE_16 | /* Port size = 16 bit */\ 0x00000010 | /* drive TE high */\ CSPR_MSEL_NOR | /* MSEL = NOR */\ @@ -217,18 +217,18 @@ FTIM2_NOR_TWPH(0x6)) #define CFG_SYS_NOR_FTIM3 0x0 -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 /* More NOR Flash params */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} /* NAND Flash on IFC CS1*/ #define CFG_SYS_NAND_BASE 0xfa000000 @@ -266,23 +266,23 @@ FTIM2_NAND_TWHRE(0x3c)) #define CFG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e)) -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 /* More NAND Flash Params */ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } /* QRIO on IFC CS2 */ -#define CONFIG_SYS_QRIO_BASE 0xfb000000 -#define CONFIG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CONFIG_SYS_QRIO_BASE) +#define CFG_SYS_QRIO_BASE 0xfb000000 +#define CFG_SYS_QRIO_BASE_PHYS (0xf00000000ull | CFG_SYS_QRIO_BASE) #define SYS_QRIO_CSPR_EXT (0x0f) -#define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \ +#define SYS_QRIO_CSPR (CSPR_PHYS_ADDR(CFG_SYS_QRIO_BASE) | \ CSPR_PORT_SIZE_8 | /* Port size = 8 bit */\ 0x00000010 | /* drive TE high */\ CSPR_MSEL_GPCM | /* MSEL = GPCM */\ @@ -300,28 +300,28 @@ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x7)) #define SYS_QRIO_FTIM3 0x04000000 -#define CONFIG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT -#define CONFIG_SYS_CSPR2 SYS_QRIO_CSPR -#define CONFIG_SYS_AMASK2 SYS_QRIO_AMASK -#define CONFIG_SYS_CSOR2 SYS_QRIO_CSOR -#define CONFIG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3 +#define CFG_SYS_CSPR2_EXT SYS_QRIO_CSPR_EXT +#define CFG_SYS_CSPR2 SYS_QRIO_CSPR +#define CFG_SYS_AMASK2 SYS_QRIO_AMASK +#define CFG_SYS_CSOR2 SYS_QRIO_CSOR +#define CFG_SYS_CS2_FTIM0 SYS_QRIO_FTIM0 +#define CFG_SYS_CS2_FTIM1 SYS_QRIO_FTIM1 +#define CFG_SYS_CS2_FTIM2 SYS_QRIO_FTIM2 +#define CFG_SYS_CS2_FTIM3 SYS_QRIO_FTIM3 #define CONFIG_HWCONFIG /* define to use L1 as initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 +#define CFG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* * Serial Port - controlled on board with jumper J8 @@ -331,7 +331,7 @@ */ #if !defined(CONFIG_DM_SERIAL) #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR + 0x11C500) #endif #ifndef __ASSEMBLY__ @@ -351,30 +351,30 @@ int get_scl(void); #define CFG_SYS_PCIE1_IO_VIRT 0xf8000000 #define CFG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_BMAN_NUM_PORTALS 10 +#define CFG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CFG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CFG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_BMAN_CENA_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_CINH_BASE (CFG_SYS_BMAN_MEM_BASE + \ + CFG_SYS_BMAN_CENA_SIZE) +#define CFG_SYS_BMAN_CINH_SIZE (CFG_SYS_BMAN_MEM_SIZE >> 1) +#define CFG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CFG_SYS_QMAN_NUM_PORTALS 10 +#define CFG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CFG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CFG_SYS_QMAN_MEM_SIZE 0x02000000 +#define CFG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CFG_SYS_QMAN_CENA_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_CINH_BASE (CFG_SYS_QMAN_MEM_BASE + \ + CFG_SYS_QMAN_CENA_SIZE) +#define CFG_SYS_QMAN_CINH_SIZE (CFG_SYS_QMAN_MEM_SIZE >> 1) +#define CFG_SYS_QMAN_SWP_ISDR_REG 0xE08 /* Qman / Bman */ /* RGMII (FM1@DTESC5) is local managemant interface */ -#define CONFIG_SYS_RGMII2_PHY_ADDR 0x11 +#define CFG_SYS_RGMII2_PHY_ADDR 0x11 /* * Hardware Watchdog @@ -387,7 +387,7 @@ int get_scl(void); * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration @@ -412,12 +412,12 @@ int get_scl(void); __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ " +${filesize}\0" \ - "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ + "update-nor=protect off " __stringify(CFG_SYS_FLASH_BASE) \ " +${filesize} && " \ - "erase " __stringify(CONFIG_SYS_FLASH_BASE) \ + "erase " __stringify(CFG_SYS_FLASH_BASE) \ " +${filesize} && " \ "cp.b ${load_addr_r} " \ - __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \ + __stringify(CFG_SYS_FLASH_BASE) " ${filesize} && " \ "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0" \ "set_fdthigh=true\0" \ diff --git a/include/configs/kmcoge5ne.h b/include/configs/kmcoge5ne.h index b954029874..2be996aaaf 100644 --- a/include/configs/kmcoge5ne.h +++ b/include/configs/kmcoge5ne.h @@ -12,7 +12,7 @@ #define CONFIG_NAND_ECC_BCH #define CONFIG_NAND_KMETER1 #define NAND_MAX_CHIPS 1 -#define CFG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ +#define CFG_SYS_NAND_BASE CFG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */ #define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" @@ -26,7 +26,7 @@ /** * KMCOGE5NE has 512 MB RAM */ -#define CONFIG_SYS_DDR_CS0_CONFIG (\ +#define CFG_SYS_DDR_CS0_CONFIG (\ CSCONFIG_EN | \ CSCONFIG_AP | \ CSCONFIG_ODT_WR_ONLY_CURRENT | \ @@ -35,7 +35,7 @@ CSCONFIG_COL_BIT_10) /* enable POST tests */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) +#define CONFIG_POST (CFG_SYS_POST_MEMORY|CFG_SYS_POST_MEM_REGIONS) #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */ #define CPM_POST_WORD_ADDR CONFIG_SYS_MEMTEST_END #define CONFIG_TESTPIN_REG gprt3 /* for kmcoge5ne */ diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 4245875e39..910fc1b2cb 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -16,7 +16,7 @@ #include "km/km-mpc83xx.h" #include "km/km-mpc8360.h" -#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ +#define CFG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ CSCONFIG_ROW_BIT_13 | \ CSCONFIG_COL_BIT_10 | \ CSCONFIG_ODT_WR_ONLY_CURRENT) diff --git a/include/configs/kontron-sl-mx6ul.h b/include/configs/kontron-sl-mx6ul.h index e2808ec02d..6fcacdb0c6 100644 --- a/include/configs/kontron-sl-mx6ul.h +++ b/include/configs/kontron-sl-mx6ul.h @@ -16,10 +16,10 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* Board and environment settings */ #define CONFIG_MXC_UART_BASE UART4_BASE diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h index 73b5951762..80a3230460 100644 --- a/include/configs/kontron-sl-mx8mm.h +++ b/include/configs/kontron-sl-mx8mm.h @@ -19,8 +19,8 @@ #define PHYS_SDRAM_SIZE (SZ_4G) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x200000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 /* Board and environment settings */ #define CONFIG_HOSTNAME "kontron-mx8mm" diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h index 9b452818c1..2abcb849a2 100644 --- a/include/configs/kontron_pitx_imx8m.h +++ b/include/configs/kontron_pitx_imx8m.h @@ -61,8 +61,8 @@ BOOTENV -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index bbf0761814..9c3174d0e0 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -12,17 +12,17 @@ /* we don't have secure memory unless we have a BL31 */ #ifndef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT -#undef CONFIG_SYS_MEM_RESERVE_SECURE +#undef CFG_SYS_MEM_RESERVE_SECURE #endif /* DDR */ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL /* early stack pointer */ diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 967de66f3c..c551585a20 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -68,8 +68,8 @@ #define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* environment organization */ diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index de1fc0bfa4..136e228682 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -87,8 +87,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment */ diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 9b70eed46f..828f910963 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -31,7 +31,7 @@ #ifdef CONFIG_CMD_I2C /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ #if defined(CONFIG_NET2BIG_V2) -#define CONFIG_SYS_I2C_G762_ADDR 0x3e +#define CFG_SYS_I2C_G762_ADDR 0x3e #endif #endif /* CONFIG_CMD_I2C */ diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index bee064c6f3..2664982715 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -17,10 +17,10 @@ /* * SoC Configuration */ -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CFG_SYS_EXCEPTION_VECTORS_HIGH +#define CFG_SYS_OSCIN_FREQ 24000000 +#define CFG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CFG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) /* * Memory Info @@ -38,7 +38,7 @@ */ #define CFG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) +#define CFG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) /* * U-Boot general configuration diff --git a/include/configs/librem5.h b/include/configs/librem5.h index 3a2c508ffa..11b3fa6c85 100644 --- a/include/configs/librem5.h +++ b/include/configs/librem5.h @@ -79,8 +79,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index b913450885..f16c7e9122 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -9,14 +9,14 @@ /* RAM */ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) @@ -26,7 +26,7 @@ #endif /* UART */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600 } /* RAM */ diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h index d1ebd99ae1..721da81863 100644 --- a/include/configs/liteboard.h +++ b/include/configs/liteboard.h @@ -88,8 +88,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* FLASH and environment organization */ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 0712437077..7598e54ed2 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -10,10 +10,10 @@ #include <asm/arch/stream_id_lsch2.h> #include <linux/sizes.h> -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x880000000ULL /*SPI device */ #define CFG_SYS_FSL_QSPI_BASE 0x40000000 diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index 54555b34dd..e772c01907 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -17,7 +17,7 @@ */ #ifdef CONFIG_FSL_QIXIS -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_BRDCFG_REG 0x04 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_LBMAP_MASK 0x08 @@ -47,7 +47,7 @@ * RTC configuration */ #define RTC -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ /* Voltage monitor on channel 2*/ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 49a77fd6b6..b058308ecd 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -7,8 +7,8 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE /* * DDR: 800 MHz ( 1600 MT/s data rate ) @@ -41,8 +41,8 @@ #define SDRAM_CFG2_FRC_SR 0x80000000 #define SDRAM_CFG_BI 0x00000001 -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* * Serial Port @@ -104,7 +104,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 1f5a80ff08..5494b71e2b 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -7,8 +7,8 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE #ifdef CONFIG_NAND_BOOT #define CFG_SYS_NAND_U_BOOT_SIZE (400 << 10) @@ -19,8 +19,8 @@ #define SPD_EEPROM_ADDRESS 0x51 -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #ifdef CONFIG_DDR_ECC #define CONFIG_MEM_INIT_VALUE 0xdeadbeef @@ -30,16 +30,16 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE 0x60000000 +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ +#define CFG_SYS_NOR1_CSPR_EXT (0x0) +#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ @@ -61,10 +61,10 @@ #define CFG_SYS_NOR_FTIM3 0 #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ - CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \ + CFG_SYS_FLASH_BASE_PHYS + 0x8000000} /* * NAND Flash Definitions @@ -111,7 +111,7 @@ #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 #define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 @@ -131,96 +131,96 @@ #define QIXIS_PWR_CTL2 0x21 #define QIXIS_PWR_CTL2_PCTL 0x2 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) /* * QIXIS Timing parameters for IFC GPCM */ -#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xe) | \ +#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xe) | \ FTIM0_GPCM_TEADC(0xe) | \ FTIM0_GPCM_TEAHC(0xe)) -#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xe) | \ +#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xe) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xe) | \ +#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xe) | \ FTIM2_GPCM_TCH(0xe) | \ FTIM2_GPCM_TWP(0xf0)) -#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CFG_SYS_FPGA_FTIM3 0x0 #endif #if defined(CONFIG_NAND_BOOT) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #endif /* @@ -296,7 +296,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 4954606611..bc9eac700e 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -6,8 +6,8 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE /* XHCI Support - enabled by default */ @@ -56,8 +56,8 @@ #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* Serial Port */ #define CFG_SYS_NS16550_CLK get_serial_clock() @@ -141,7 +141,7 @@ "bootm $load_addr#$board\0" /* Miscellaneous configurable options */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index d77224934c..f1ccb5fc08 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -7,8 +7,8 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE #define DDR_SDRAM_CFG 0x470c0008 #define DDR_CS0_BNDS 0x008000bf @@ -59,18 +59,18 @@ #define PHYS_SDRAM 0x80000000 #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE 0x60000000 +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -94,52 +94,52 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA #endif /* CPLD */ -#define CONFIG_SYS_CPLD_BASE 0x7fb00000 -#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE +#define CFG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CFG_SYS_CPLD_BASE -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) /* CPLD Timing parameters for IFC GPCM */ -#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ +#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ FTIM0_GPCM_TEADC(0xf) | \ FTIM0_GPCM_TEAHC(0xf)) -#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ +#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0xff)) -#define CONFIG_SYS_FPGA_FTIM3 0x0 -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_FPGA_FTIM3 0x0 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_FPGA_FTIM3 /* * Serial Port @@ -298,7 +298,7 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) +#define CFG_SYS_BOOTMAPSZ (256 << 20) #define CONFIG_LS102XA_STREAM_ID diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 064c4f069c..bdd3951e85 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -13,10 +13,10 @@ /* Link Definitions */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL /* * SMP Definitinos diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h index 2539115186..228fb122f5 100644 --- a/include/configs/ls1028aqds.h +++ b/include/configs/ls1028aqds.h @@ -17,7 +17,7 @@ #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 #define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 1 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 5 @@ -35,19 +35,19 @@ #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RST_FORCE_MEM 0x01 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) #endif /* RTC */ -#define CONFIG_SYS_RTC_BUS_NUM 1 +#define CFG_SYS_RTC_BUS_NUM 1 #define I2C_MUX_CH_RTC 0xB /* Store environment at top of flash */ diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h index e7b2543b73..5c13461257 100644 --- a/include/configs/ls1028ardb.h +++ b/include/configs/ls1028ardb.h @@ -10,7 +10,7 @@ #define COUNTER_FREQUENCY_REAL (get_board_sys_clk() / 4) -#define CONFIG_SYS_RTC_BUS_NUM 0 +#define CFG_SYS_RTC_BUS_NUM 0 /* Store environment at top of flash */ @@ -21,7 +21,7 @@ #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 #define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 2 #define QIXIS_LBMAP_MASK 0xe0 #define QIXIS_LBMAP_SHIFT 0x5 @@ -39,12 +39,12 @@ #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RST_FORCE_MEM 0x01 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) #endif diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e940dff998..b4048744b1 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -32,10 +32,10 @@ /* Link Definitions */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x880000000ULL #define CPU_RELEASE_ADDR secondary_boot_addr @@ -82,14 +82,14 @@ #if defined(CONFIG_TFABOOT) || \ (!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)) /* - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_TEXT_BASE is linked to 0x60000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x60000000 +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ @@ -104,7 +104,7 @@ /* FMan ucode */ #ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CFG_SYS_FM_MURAM_SIZE 0x60000 #endif #endif diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index 87751f786c..dab57382ed 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -39,13 +39,13 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ +#define CFG_SYS_NOR1_CSPR_EXT (0x0) +#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ @@ -66,10 +66,10 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ - CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \ + CFG_SYS_FLASH_BASE_PHYS + 0x8000000} -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA /* * NAND Flash Definitions @@ -125,7 +125,7 @@ #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 #define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 @@ -143,130 +143,130 @@ #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) /* * QIXIS Timing parameters for IFC GPCM */ -#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ +#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ FTIM0_GPCM_TEADC(0x20) | \ FTIM0_GPCM_TEAHC(0x10)) -#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ +#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ +#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0xf0)) -#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CFG_SYS_FPGA_FTIM3 0x0 #endif #ifdef CONFIG_TFABOOT -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #else #ifdef CONFIG_NAND_BOOT -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #endif #endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 76251fde57..12c4853ea9 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -21,7 +21,7 @@ #define CFG_SYS_NOR_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CFG_SYS_NOR_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -41,11 +41,11 @@ FTIM2_NOR_TWPH(0x8) | \ FTIM2_NOR_TWP(0x10)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_SYS_IFC_CCR 0x01000000 +#define CFG_SYS_IFC_CCR 0x01000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA /* * NAND Flash Definitions @@ -91,97 +91,97 @@ /* * CPLD */ -#define CONFIG_SYS_CPLD_BASE 0x7fb00000 -#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE +#define CFG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CFG_SYS_CPLD_BASE -#define CONFIG_SYS_CPLD_CSPR_EXT (0x0) -#define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ +#define CFG_SYS_CPLD_CSPR_EXT (0x0) +#define CFG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CPLD_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_CPLD_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) /* CPLD Timing parameters for IFC GPCM */ -#define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ +#define CFG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \ FTIM0_GPCM_TEADC(0xf) | \ FTIM0_GPCM_TEAHC(0xf)) -#define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ +#define CFG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0xff)) -#define CONFIG_SYS_CPLD_FTIM3 0x0 +#define CFG_SYS_CPLD_FTIM3 0x0 /* IFC Timing Params */ #ifdef CONFIG_TFABOOT -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 - -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 + +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #else #ifdef CONFIG_NAND_BOOT -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 - -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 + +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NOR_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 - -#define CONFIG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR1 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 + +#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3 #endif #endif -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_CPLD_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_CPLD_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_CPLD_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_CPLD_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_CPLD_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_CPLD_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_CPLD_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_CPLD_FTIM3 /* * Environment diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index ce254d8b3f..cac30e4679 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -32,10 +32,10 @@ /* Link Definitions */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x880000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x880000000ULL #define CPU_RELEASE_ADDR secondary_boot_addr @@ -68,7 +68,7 @@ /* FMan ucode */ #ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CFG_SYS_FM_MURAM_SIZE 0x60000 #endif #endif diff --git a/include/configs/ls1046afrwy.h b/include/configs/ls1046afrwy.h index 8402eac418..58ae0fb0a6 100644 --- a/include/configs/ls1046afrwy.h +++ b/include/configs/ls1046afrwy.h @@ -8,7 +8,7 @@ #include "ls1046a_common.h" -#define CONFIG_SYS_UBOOT_BASE 0x40100000 +#define CFG_SYS_UBOOT_BASE 0x40100000 /* * NAND Flash Definitions @@ -48,14 +48,14 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE /* IFC Timing Params */ -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 /* EEPROM */ #define I2C_RETIMER_ADDR 0x18 @@ -67,8 +67,8 @@ /* RTC */ #define RTC -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 0 I2C bus 0*/ -#define CONFIG_SYS_RTC_BUS_NUM 0 +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 0 I2C bus 0*/ +#define CFG_SYS_RTC_BUS_NUM 0 /* * Environment diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index d565492f1d..553ae841ca 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -33,14 +33,14 @@ /* IFC */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) /* - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_TEXT_BASE is linked to 0x60000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x60000000 -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x60000000 +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ @@ -58,13 +58,13 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0x0) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ +#define CFG_SYS_NOR1_CSPR_EXT (0x0) +#define CFG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS \ + 0x8000000) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ @@ -86,10 +86,10 @@ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS, \ - CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS, \ + CFG_SYS_FLASH_BASE_PHYS + 0x8000000} -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_WRITE_SWAPPED_DATA /* * NAND Flash Definitions @@ -145,7 +145,7 @@ #ifdef CONFIG_FSL_QIXIS #define QIXIS_BASE 0x7fb00000 #define QIXIS_BASE_PHYS QIXIS_BASE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_LBMAP_MASK 0x0f #define QIXIS_LBMAP_SHIFT 0 @@ -163,130 +163,130 @@ #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ CSOR_NOR_NOR_MODE_AVD_NOR | \ CSOR_NOR_TRHZ_80) /* * QIXIS Timing parameters for IFC GPCM */ -#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ +#define CFG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xc) | \ FTIM0_GPCM_TEADC(0x20) | \ FTIM0_GPCM_TEAHC(0x10)) -#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ +#define CFG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0x50) | \ FTIM1_GPCM_TRAD(0x1f)) -#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ +#define CFG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0x8) | \ FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0xf0)) -#define CONFIG_SYS_FPGA_FTIM3 0x0 +#define CFG_SYS_FPGA_FTIM3 0x0 #endif #ifdef CONFIG_TFABOOT -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #else #ifdef CONFIG_NAND_BOOT -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR1_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_AMASK3 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 CFG_SYS_FPGA_FTIM0 +#define CFG_SYS_CS3_FTIM1 CFG_SYS_FPGA_FTIM1 +#define CFG_SYS_CS3_FTIM2 CFG_SYS_FPGA_FTIM2 +#define CFG_SYS_CS3_FTIM3 CFG_SYS_FPGA_FTIM3 #endif #endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 0df6891598..f3904e7b3f 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -16,7 +16,7 @@ #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #if defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_UBOOT_BASE 0x40100000 +#define CFG_SYS_UBOOT_BASE 0x40100000 #endif #define CFG_SYS_NAND_BASE 0x7e800000 @@ -55,46 +55,46 @@ /* * CPLD */ -#define CONFIG_SYS_CPLD_BASE 0x7fb00000 -#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE +#define CFG_SYS_CPLD_BASE 0x7fb00000 +#define CPLD_BASE_PHYS CFG_SYS_CPLD_BASE -#define CONFIG_SYS_CPLD_CSPR_EXT (0x0) -#define CONFIG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ +#define CFG_SYS_CPLD_CSPR_EXT (0x0) +#define CFG_SYS_CPLD_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CPLD_CSOR CSOR_NOR_ADM_SHIFT(16) +#define CFG_SYS_CPLD_AMASK IFC_AMASK(64 * 1024) +#define CFG_SYS_CPLD_CSOR CSOR_NOR_ADM_SHIFT(16) /* CPLD Timing parameters for IFC GPCM */ -#define CONFIG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CPLD_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_CPLD_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ +#define CFG_SYS_CPLD_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0x3E)) -#define CONFIG_SYS_CPLD_FTIM3 0x0 +#define CFG_SYS_CPLD_FTIM3 0x0 /* IFC Timing Params */ -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 - -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_CPLD_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_CPLD_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_CPLD_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_CPLD_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_CPLD_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CPLD_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CPLD_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 + +#define CFG_SYS_CSPR2_EXT CFG_SYS_CPLD_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_CPLD_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_CPLD_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_CPLD_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_CPLD_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_CPLD_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_CPLD_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_CPLD_FTIM3 /* EEPROM */ #define I2C_RETIMER_ADDR 0x18 diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index f8eaee881d..bacc84f629 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -30,10 +30,10 @@ #define CFG_SYS_FSL_QSPI_BASE 0x20000000 #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL /* * SMP Definitinos */ @@ -64,18 +64,18 @@ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) * * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_TEXT_BASE is linked to 0x30000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x580000000ULL -#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x580000000ULL +#define CFG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 +#define CFG_SYS_FLASH1_BASE_PHYS 0xC0000000 +#define CFG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); @@ -92,12 +92,12 @@ unsigned long long get_qixis_addr(void); /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 -#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 +#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -107,7 +107,7 @@ unsigned long long get_qixis_addr(void); */ #if defined(CONFIG_FSL_MC_ENET) -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) +#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Miscellaneous configurable options */ diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h index b75d4ccf5c..d84622f322 100644 --- a/include/configs/ls1088aqds.h +++ b/include/configs/ls1088aqds.h @@ -22,27 +22,27 @@ * IFC Definitions */ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CFG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) -#define CONFIG_SYS_NOR0_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR0_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ +#define CFG_SYS_NOR1_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH1_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR1_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH1_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -59,13 +59,13 @@ FTIM2_NOR_TWPH(0xe) | \ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x04000000 -#define CONFIG_SYS_IFC_CCR 0x01000000 +#define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ - CONFIG_SYS_FLASH_BASE + 0x40000000} +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ + CFG_SYS_FLASH_BASE + 0x40000000} #endif #endif @@ -101,7 +101,7 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 6 #define QIXIS_QMAP_MASK 0xe0 #define QIXIS_QMAP_SHIFT 5 @@ -127,8 +127,8 @@ #define QIXIS_SDID_MASK 0x07 #define QIXIS_ESDHC_NO_ADAPTER 0x7 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) @@ -139,9 +139,9 @@ #define SYS_FPGA_AMASK IFC_AMASK(64 * 1024) #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) +#define CFG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) #else -#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12) +#define CFG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(12) #endif /* QIXIS Timing parameters*/ #define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ @@ -155,102 +155,102 @@ #define SYS_FPGA_CS_FTIM3 0x0 #ifdef CONFIG_TFABOOT -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY -#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY -#define CONFIG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK3 SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR0_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR_EARLY +#define CFG_SYS_CSPR1_FINAL CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY +#define CFG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL +#define CFG_SYS_AMASK3 SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 +#define CFG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 +#define CFG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 +#define CFG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 #else #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK2 SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_FPGA_CSPR +#define CFG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL +#define CFG_SYS_AMASK2 SYS_FPGA_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 +#define CFG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 +#define CFG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 +#define CFG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY -#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY -#define CONFIG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK3 SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 -#define CONFIG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 -#define CONFIG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 -#define CONFIG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR0_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR_EARLY +#define CFG_SYS_CSPR1_FINAL CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY +#define CFG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR3_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR3 CFG_SYS_FPGA_CSPR +#define CFG_SYS_CSPR3_FINAL SYS_FPGA_CSPR_FINAL +#define CFG_SYS_AMASK3 SYS_FPGA_AMASK +#define CFG_SYS_CSOR3 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS3_FTIM0 SYS_FPGA_CS_FTIM0 +#define CFG_SYS_CS3_FTIM1 SYS_FPGA_CS_FTIM1 +#define CFG_SYS_CS3_FTIM2 SYS_FPGA_CS_FTIM2 +#define CFG_SYS_CS3_FTIM3 SYS_FPGA_CS_FTIM3 #endif #endif -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* * I2C bus multiplexer @@ -281,7 +281,7 @@ * RTC configuration */ #define RTC -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ #ifdef CONFIG_FSL_DSPI #if !defined(CONFIG_TFABOOT) && \ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 27510adae6..187b3072f0 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -20,17 +20,17 @@ #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024) #define CFG_SYS_NOR_AMASK_EARLY IFC_AMASK(64 * 1024 * 1024) -#define CONFIG_SYS_NOR0_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR0_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -44,12 +44,12 @@ FTIM2_NOR_TCH(0x0) | \ FTIM2_NOR_TWP(0x1)) #define CFG_SYS_NOR_FTIM3 0x04000000 -#define CONFIG_SYS_IFC_CCR 0x01000000 +#define CFG_SYS_IFC_CCR 0x01000000 #ifndef SYS_NO_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif #endif @@ -85,7 +85,7 @@ #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_BRDCFG4_OFFSET 0x54 #define QIXIS_LBMAP_SWITCH 2 #define QIXIS_QMAP_MASK 0xe0 @@ -107,8 +107,8 @@ #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RST_FORCE_MEM 0x01 -#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) -#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ +#define CFG_SYS_FPGA_CSPR_EXT (0x0) +#define CFG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) @@ -117,8 +117,8 @@ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64*1024) -#define CONFIG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) +#define CFG_SYS_FPGA_AMASK IFC_AMASK(64*1024) +#define CFG_SYS_FPGA_CSOR CSOR_GPCM_ADM_SHIFT(0) /* QIXIS Timing parameters*/ #define SYS_FPGA_CS_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ @@ -132,36 +132,36 @@ #if defined(CONFIG_TFABOOT) || \ defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_FPGA_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_FPGA_CSPR -#define CONFIG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL -#define CONFIG_SYS_AMASK2 CONFIG_SYS_FPGA_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_FPGA_CSOR -#define CONFIG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_FPGA_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_FPGA_CSPR +#define CFG_SYS_CSPR2_FINAL SYS_FPGA_CSPR_FINAL +#define CFG_SYS_AMASK2 CFG_SYS_FPGA_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_FPGA_CSOR +#define CFG_SYS_CS2_FTIM0 SYS_FPGA_CS_FTIM0 +#define CFG_SYS_CS2_FTIM1 SYS_FPGA_CS_FTIM1 +#define CFG_SYS_CS2_FTIM2 SYS_FPGA_CS_FTIM2 +#define CFG_SYS_CS2_FTIM3 SYS_FPGA_CS_FTIM3 #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR0_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 #endif -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define I2C_MUX_CH_VOL_MONITOR 0xA /* Voltage monitor on channel 2*/ @@ -191,7 +191,7 @@ * RTC configuration */ #define RTC -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ #endif #ifndef SPL_NO_ENV diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 21c097ecbb..18defd5e5a 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -17,10 +17,10 @@ /* Link Definitions */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL /* * SMP Definitinos @@ -56,18 +56,18 @@ * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet) * * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation. - * CONFIG_SYS_FLASH_BASE has the final address (core view) - * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view) - * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address + * CFG_SYS_FLASH_BASE has the final address (core view) + * CFG_SYS_FLASH_BASE_PHYS has the final address (IFC view) + * CFG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address * CONFIG_TEXT_BASE is linked to 0x30000000 for booting */ -#define CONFIG_SYS_FLASH_BASE 0x580000000ULL -#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000 -#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 +#define CFG_SYS_FLASH_BASE 0x580000000ULL +#define CFG_SYS_FLASH_BASE_PHYS 0x80000000 +#define CFG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 -#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 +#define CFG_SYS_FLASH1_BASE_PHYS 0xC0000000 +#define CFG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); @@ -84,13 +84,13 @@ unsigned long long get_qixis_addr(void); /* MC firmware */ /* TODO Actual DPL max length needs to be confirmed with the MC FW team */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 /* For LS2085A */ -#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 -#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 +#define CFG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000 +#define CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000 /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -99,7 +99,7 @@ unsigned long long get_qixis_addr(void); * 512MB aligned, so the min size to hide is 512MB. */ #ifdef CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) +#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024) #endif /* Miscellaneous configurable options */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 7315790f1f..067587b53c 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -10,10 +10,10 @@ #include "ls2080a_common.h" #ifdef CONFIG_FSL_QSPI -#define CONFIG_SYS_I2C_IFDR_DIV 0x7e +#define CFG_SYS_I2C_IFDR_DIV 0x7e #endif -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #define COUNTER_FREQUENCY_REAL (get_board_sys_clk()/4) #define CONFIG_MEM_INIT_VALUE 0xdeadbeef @@ -25,27 +25,27 @@ #define SPD_EEPROM_ADDRESS6 0x56 /* dummy address */ #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CFG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) -#define CONFIG_SYS_NOR0_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR0_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS) | \ +#define CFG_SYS_NOR1_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH1_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR1_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH1_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -61,13 +61,13 @@ FTIM2_NOR_TWPH(0x0E) | \ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x04000000 -#define CONFIG_SYS_IFC_CCR 0x01000000 +#define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ - CONFIG_SYS_FLASH_BASE + 0x40000000} +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ + CFG_SYS_FLASH_BASE + 0x40000000} #endif #define CFG_SYS_NAND_CSPR_EXT (0x0) @@ -119,92 +119,92 @@ #define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_FORCE_MEM 0x01 -#define CONFIG_SYS_CSPR3_EXT (0x0) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ +#define CFG_SYS_CSPR3_EXT (0x0) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ +#define CFG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12) +#define CFG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12) /* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0x3E)) -#define CONFIG_SYS_CS3_FTIM3 0x0 +#define CFG_SYS_CS3_FTIM3 0x0 #if defined(CONFIG_SPL) #if defined(CONFIG_NAND_BOOT) -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR_EARLY -#define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK_EARLY -#define CONFIG_SYS_AMASK2_FINAL CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR1_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR1_CSPR_EARLY +#define CFG_SYS_CSPR2_FINAL CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK_EARLY +#define CFG_SYS_AMASK2_FINAL CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 #define CFG_SYS_NAND_U_BOOT_SIZE (640 * 1024) #endif #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR_EARLY -#define CONFIG_SYS_CSPR1_FINAL CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY -#define CONFIG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR0_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR1_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR1 CFG_SYS_NOR1_CSPR_EARLY +#define CFG_SYS_CSPR1_FINAL CFG_SYS_NOR1_CSPR +#define CFG_SYS_AMASK1 CFG_SYS_NOR_AMASK_EARLY +#define CFG_SYS_AMASK1_FINAL CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR1 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS1_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS1_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS1_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS1_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 #endif -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* * I2C @@ -229,7 +229,7 @@ */ #define RTC #define CONFIG_RTC_DS3231 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* Initial environment variables */ #undef CONFIG_EXTRA_ENV_SETTINGS diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index daca3be16c..32a1194872 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -32,17 +32,17 @@ #if !defined(CONFIG_FSL_QSPI) || defined(CONFIG_TFABOOT) -#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CFG_SYS_NOR0_CSPR_EXT (0x0) #define CFG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) #define CFG_SYS_NOR_AMASK_EARLY IFC_AMASK(64*1024*1024) -#define CONFIG_SYS_NOR0_CSPR \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ +#define CFG_SYS_NOR0_CSPR \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) -#define CONFIG_SYS_NOR0_CSPR_EARLY \ - (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY) | \ +#define CFG_SYS_NOR0_CSPR_EARLY \ + (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS_EARLY) | \ CSPR_PORT_SIZE_16 | \ CSPR_MSEL_NOR | \ CSPR_V) @@ -58,13 +58,13 @@ FTIM2_NOR_TWPH(0x0E) | \ FTIM2_NOR_TWP(0x1c)) #define CFG_SYS_NOR_FTIM3 0x04000000 -#define CONFIG_SYS_IFC_CCR 0x01000000 +#define CFG_SYS_IFC_CCR 0x01000000 #ifdef CONFIG_MTD_NOR_FLASH #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\ - CONFIG_SYS_FLASH_BASE + 0x40000000} +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE,\ + CFG_SYS_FLASH_BASE + 0x40000000} #endif #define CFG_SYS_NAND_CSPR_EXT (0x0) @@ -113,70 +113,70 @@ #define QIXIS_RCW_SRC_NAND 0x119 #define QIXIS_RST_FORCE_MEM 0x01 -#define CONFIG_SYS_CSPR3_EXT (0x0) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ +#define CFG_SYS_CSPR3_EXT (0x0) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ +#define CFG_SYS_CSPR3_FINAL (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ | CSPR_PORT_SIZE_8 \ | CSPR_MSEL_GPCM \ | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) -#define CONFIG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12) +#define CFG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CFG_SYS_CSOR3 CSOR_GPCM_ADM_SHIFT(12) /* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ FTIM0_GPCM_TEADC(0x0e) | \ FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0xf) | \ FTIM2_GPCM_TCH(0xf) | \ FTIM2_GPCM_TWP(0x3E)) -#define CONFIG_SYS_CS3_FTIM3 0x0 +#define CFG_SYS_CS3_FTIM3 0x0 #if defined(CONFIG_SPL) && defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR2_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR2_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NAND_FTIM3 #define CFG_SYS_NAND_U_BOOT_SIZE (512 * 1024) #else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY -#define CONFIG_SYS_CSPR0_FINAL CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CFG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CFG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CFG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CFG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CFG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 +#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT +#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR_EARLY +#define CFG_SYS_CSPR0_FINAL CFG_SYS_NOR0_CSPR +#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK +#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR +#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0 +#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1 +#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2 +#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3 +#define CFG_SYS_CSPR2_EXT CFG_SYS_NAND_CSPR_EXT +#define CFG_SYS_CSPR2 CFG_SYS_NAND_CSPR +#define CFG_SYS_AMASK2 CFG_SYS_NAND_AMASK +#define CFG_SYS_CSOR2 CFG_SYS_NAND_CSOR +#define CFG_SYS_CS2_FTIM0 CFG_SYS_NAND_FTIM0 +#define CFG_SYS_CS2_FTIM1 CFG_SYS_NAND_FTIM1 +#define CFG_SYS_CS2_FTIM2 CFG_SYS_NAND_FTIM2 +#define CFG_SYS_CS2_FTIM3 CFG_SYS_NAND_FTIM3 #endif #endif -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #ifdef CONFIG_TARGET_LS2081ARDB #define QIXIS_QMAP_MASK 0x07 @@ -197,7 +197,7 @@ * I2C */ #ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 #endif #define I2C_MUX_PCA_ADDR 0x75 #define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/ @@ -212,10 +212,10 @@ */ #define RTC #ifdef CONFIG_TARGET_LS2081ARDB -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#define CFG_SYS_I2C_RTC_ADDR 0x51 #else #define CONFIG_RTC_DS3231 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 #endif #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index ad85e2de6e..bbee9df404 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -10,15 +10,15 @@ #include <asm/arch/config.h> #include <asm/arch/soc.h> -#define CONFIG_SYS_FLASH_BASE 0x20000000 +#define CFG_SYS_FLASH_BASE 0x20000000 /* DDR */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL #define CFG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 -#define CONFIG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL +#define CFG_SYS_DDR_BLOCK2_BASE 0x2080000000ULL #define CFG_SYS_SDRAM_SIZE 0x200000000UL -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #define SPD_EEPROM_ADDRESS1 0x51 #define SPD_EEPROM_ADDRESS2 0x52 @@ -42,22 +42,22 @@ /* Serial Port */ #define CONFIG_PL011_CLOCK (get_bus_freq(0) / 4) -#define CONFIG_SYS_SERIAL0 0x21c0000 -#define CONFIG_SYS_SERIAL1 0x21d0000 -#define CONFIG_SYS_SERIAL2 0x21e0000 -#define CONFIG_SYS_SERIAL3 0x21f0000 +#define CFG_SYS_SERIAL0 0x21c0000 +#define CFG_SYS_SERIAL1 0x21d0000 +#define CFG_SYS_SERIAL2 0x21e0000 +#define CFG_SYS_SERIAL3 0x21f0000 /*below might needs to be removed*/ -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1, \ - (void *)CONFIG_SYS_SERIAL2, \ - (void *)CONFIG_SYS_SERIAL3 } +#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ + (void *)CFG_SYS_SERIAL1, \ + (void *)CFG_SYS_SERIAL2, \ + (void *)CFG_SYS_SERIAL3 } /* MC firmware */ -#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 -#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 -#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000 +#define CFG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000 +#define CFG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* * Carve out a DDR region which will not be used by u-boot/Linux @@ -66,7 +66,7 @@ * 512MB aligned, so the min size to hide is 512MB. */ #ifdef CONFIG_FSL_MC_ENET -#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) +#define CFG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024) #endif /* I2C bus multiplexer */ @@ -75,10 +75,10 @@ /* RTC */ #define RTC -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ /* Qixis */ -#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define CFG_SYS_I2C_FPGA_ADDR 0x66 /* USB */ diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h index 4e8a904859..9f891064bd 100644 --- a/include/configs/lx2160aqds.h +++ b/include/configs/lx2160aqds.h @@ -9,7 +9,7 @@ #include "lx2160a_common.h" /* RTC */ -#define CONFIG_SYS_RTC_BUS_NUM 0 +#define CFG_SYS_RTC_BUS_NUM 0 /* MAC/PHY configuration */ diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h index bb9239cc59..58c0ff3657 100644 --- a/include/configs/lx2160ardb.h +++ b/include/configs/lx2160ardb.h @@ -9,7 +9,7 @@ #include "lx2160a_common.h" /* RTC */ -#define CONFIG_SYS_RTC_BUS_NUM 4 +#define CFG_SYS_RTC_BUS_NUM 4 /* EMC2305 */ #define I2C_MUX_CH_EMC2305 0x09 diff --git a/include/configs/lx2162aqds.h b/include/configs/lx2162aqds.h index b70abb013f..157688ef7d 100644 --- a/include/configs/lx2162aqds.h +++ b/include/configs/lx2162aqds.h @@ -11,7 +11,7 @@ /* USB */ /* RTC */ -#define CONFIG_SYS_RTC_BUS_NUM 0 +#define CFG_SYS_RTC_BUS_NUM 0 /* Initial environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index cbdb2fa135..f87bbf7ccf 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -21,8 +21,8 @@ #define PHYS_SDRAM_SIZE (gd->ram_size) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* * U-Boot general configurations @@ -58,13 +58,13 @@ #define CONFIG_FEC_MXC_PHYADDR 0x0 #endif -#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */ +#define CFG_SYS_RTC_BUS_NUM 1 /* I2C2 */ /* * RTC */ #ifdef CONFIG_CMD_DATE -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 #endif /* @@ -77,7 +77,7 @@ #endif /* LVDS display */ -#define CONFIG_SYS_LDB_CLOCK 33260000 +#define CFG_SYS_LDB_CLOCK 33260000 #define CONFIG_IMX_VIDEO_SKIP /* IIM Fuses */ diff --git a/include/configs/malta.h b/include/configs/malta.h index c9aee00cd3..65f4b05649 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -28,7 +28,7 @@ #endif #define CFG_SYS_SDRAM_SIZE 0x10000000 /* 256 MiB */ -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* * Serial driver @@ -38,9 +38,9 @@ * Flash configuration */ #ifdef CONFIG_64BIT -# define CONFIG_SYS_FLASH_BASE 0xffffffffbe000000 +# define CFG_SYS_FLASH_BASE 0xffffffffbe000000 #else -# define CONFIG_SYS_FLASH_BASE 0xbe000000 +# define CFG_SYS_FLASH_BASE 0xbe000000 #endif /* diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h index 8aa3b0cd80..7c401a2cfd 100644 --- a/include/configs/mccmon6.h +++ b/include/configs/mccmon6.h @@ -9,7 +9,7 @@ #include "mx6_common.h" -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000) +#define CFG_SYS_UBOOT_BASE (CFG_SYS_FLASH_BASE + 0x80000) /* * Below defines are set but NOT really used since we by @@ -24,12 +24,12 @@ #define CFG_SYS_FSL_ESDHC_ADDR 0 /* NOR 16-bit mode */ -#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR +#define CFG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR #define CONFIG_FLASH_VERIFY /* NOR Flash MTD */ -#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) } -#define CONFIG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } +#define CFG_SYS_FLASH_BANKS_LIST { (CFG_SYS_FLASH_BASE) } +#define CFG_SYS_FLASH_BANKS_SIZES { (32 * SZ_1M) } /* Ethernet Configuration */ #define CONFIG_FEC_MXC_PHYADDR 1 @@ -116,7 +116,7 @@ "nor_img_addr=0x11000000\0" \ "nor_img_file=core-image-lwn-mccmon6.nor\0" \ "emmc_img_file=core-image-lwn-mccmon6.ext4\0" \ - "nor_bank_start=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ + "nor_bank_start=" __stringify(CFG_SYS_FLASH_BASE) "\0" \ "nor_img_size=0x02000000\0" \ "factory_script_file=factory.scr\0" \ "factory_load_script=" \ @@ -215,8 +215,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h index 2422cbf9f0..9e480fe055 100644 --- a/include/configs/meerkat96.h +++ b/include/configs/meerkat96.h @@ -18,8 +18,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment configs */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index 2e07886c19..d190e4b503 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -28,8 +28,8 @@ */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ +#define CFG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ /* Misc CPU related */ @@ -47,8 +47,8 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM #define CFG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM0 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM0 +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 139b5bca10..edd2466caa 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -13,7 +13,7 @@ /* uart */ /* The following table includes the supported baudrates */ -# define CONFIG_SYS_BAUDRATE_TABLE \ +# define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} #define CONFIG_HOSTNAME "microblaze-generic" @@ -95,6 +95,6 @@ /* SPL part */ -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE #endif /* __CONFIG_H */ diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h index ac5ff9289a..cfe926c0a1 100644 --- a/include/configs/msc_sm2s_imx8mp.h +++ b/include/configs/msc_sm2s_imx8mp.h @@ -14,7 +14,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) +#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #if defined(CONFIG_CMD_NET) #define CONFIG_FEC_MXC_PHYADDR 1 @@ -46,8 +46,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM 0x40000000 diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index 65cd6f5bc4..d5bd492634 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -10,13 +10,13 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 #endif /* __CONFIG_MT7620_H */ diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h index 1211bb4748..7c8c67f446 100644 --- a/include/configs/mt7621.h +++ b/include/configs/mt7621.h @@ -13,7 +13,7 @@ #define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED 0x1c000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x800000 +#define CFG_SYS_INIT_SP_OFFSET 0x800000 /* MMC */ #define MMC_SUPPORTS_TUNING @@ -27,10 +27,10 @@ #endif /* Serial common */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600 } /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 #endif /* __CONFIG_MT7621_H */ diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h index e5d60e1cd2..8c297266d8 100644 --- a/include/configs/mt7622.h +++ b/include/configs/mt7622.h @@ -10,10 +10,10 @@ #define __MT7622_H /* Uboot definition */ -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* SPL -> Uboot */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* DRAM */ #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index 9c5034f5f0..9df2715fc7 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -10,7 +10,7 @@ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x80000 +#define CFG_SYS_INIT_SP_OFFSET 0x80000 /* Serial SPL */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL) @@ -19,14 +19,14 @@ #endif /* Serial common */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600 } /* SPL */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 #endif /* __CONFIG_MT7628_H */ diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index d330adbc01..bfa44aacc7 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -18,7 +18,7 @@ /* Defines for SPL */ #define CONFIG_SPI_ADDR 0x30000000 -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) +#define CFG_SYS_UBOOT_BASE (CONFIG_SPI_ADDR + CONFIG_SPL_PAD_TO) /* SPL -> Uboot */ diff --git a/include/configs/mt7981.h b/include/configs/mt7981.h index 249f0b9662..14c885ec55 100644 --- a/include/configs/mt7981.h +++ b/include/configs/mt7981.h @@ -10,10 +10,10 @@ #define __MT7981_H /* Uboot definition */ -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* SPL -> Uboot */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* DRAM */ #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt7986.h b/include/configs/mt7986.h index 990e411a64..0c41af1fc3 100644 --- a/include/configs/mt7986.h +++ b/include/configs/mt7986.h @@ -10,10 +10,10 @@ #define __MT7986_H /* Uboot definition */ -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* SPL -> Uboot */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* DRAM */ #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index d15941660a..3a35527da1 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -10,7 +10,7 @@ #define __MT8512_H /* Uboot definition */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE #define ENV_BOOT_READ_IMAGE \ "boot_rd_img=mmc dev 0" \ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index e45bfd76b6..fa275d61d1 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -32,13 +32,13 @@ /* * NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CFG_SYS_NS16550_CLK CFG_SYS_TCLK #if !defined(CONFIG_DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif -#if defined(CONFIG_ARMADA_38X) && !defined(CONFIG_SYS_BAUDRATE_TABLE) -#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ +#if defined(CONFIG_ARMADA_38X) && !defined(CFG_SYS_BAUDRATE_TABLE) +#define CFG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 500000, 576000, \ 921600, 1000000, 1152000, 1500000, \ diff --git a/include/configs/mvebu_alleycat-5.h b/include/configs/mvebu_alleycat-5.h index 9c4038be8b..5c9620371e 100644 --- a/include/configs/mvebu_alleycat-5.h +++ b/include/configs/mvebu_alleycat-5.h @@ -11,7 +11,7 @@ /* additions for new ARM relocation support */ #define CFG_SYS_SDRAM_BASE 0x200000000 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200, 230400, 460800, 921600 } /* Default Env vars */ @@ -37,6 +37,6 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_SYS_TCLK 325000000 +#define CFG_SYS_TCLK 325000000 #endif /* _CONFIG_MVEBU_ALLEYCAY_5_H */ diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 7641b56221..9bfc48c52d 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -15,7 +15,7 @@ /* additions for new ARM relocation support */ #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ +#define CFG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 500000, 576000, \ 921600, 1000000, 1152000, 1500000, \ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 358e06fd20..beac3ae649 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -9,14 +9,14 @@ /* * High Level Configuration Options (easy to change) */ -#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ +#define CFG_SYS_TCLK 250000000 /* 250MHz */ /* additions for new ARM relocation support */ #define CFG_SYS_SDRAM_BASE 0x00000000 /* auto boot */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 115200, 230400, 460800, 921600 } /* diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 2229980db3..3c99b70a2b 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -113,12 +113,12 @@ #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) -#define CONFIG_SYS_DDR_CLKSEL 0 -#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 -#define CONFIG_SYS_MAIN_PWR_ON +#define CFG_SYS_DDR_CLKSEL 0 +#define CFG_SYS_CLKTL_CBCDR 0x59E35100 +#define CFG_SYS_MAIN_PWR_ON /*----------------------------------------------------------------------- * environment organization diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index e84bac67ef..2bc462cc37 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -61,8 +61,8 @@ #define PHYS_SDRAM_SIZE (gd->ram_size) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* environment organization */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 9e837a3883..b52e70c95a 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -24,7 +24,7 @@ /* PMIC Controller */ #define CONFIG_POWER_FSL #define CONFIG_POWER_FSL_MC13892 -#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 +#define CFG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CFG_SYS_FSL_PMIC_I2C_ADDR 0x8 /* Command definition */ @@ -96,8 +96,8 @@ #define PHYS_SDRAM_SIZE (gd->ram_size) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* Framebuffer and LCD */ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 52ff7b00b4..7160654eb3 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -87,7 +87,7 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ /* Physical Memory Map */ #define PHYS_SDRAM_1 CSD0_BASE_ADDR @@ -97,8 +97,8 @@ #define PHYS_SDRAM_SIZE (gd->ram_size) #define CFG_SYS_SDRAM_BASE (PHYS_SDRAM_1) -#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) -#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) +#define CFG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CFG_SYS_INIT_RAM_SIZE (IRAM_SIZE) /* FLASH and environment organization */ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 4314556754..245530aa64 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -12,7 +12,7 @@ #define CONFIG_SC_TIMER_CLK 8000000 /* 8Mhz */ #else #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE L2_PL310_BASE +#define CFG_SYS_PL310_BASE L2_PL310_BASE #endif #endif diff --git a/include/configs/mx6cuboxi.h b/include/configs/mx6cuboxi.h index 3c4ba095e4..12741c08de 100644 --- a/include/configs/mx6cuboxi.h +++ b/include/configs/mx6cuboxi.h @@ -86,8 +86,8 @@ /* Physical Memory Map */ #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/mx6memcal.h b/include/configs/mx6memcal.h index 9c160c41ec..f6d3b2eeb9 100644 --- a/include/configs/mx6memcal.h +++ b/include/configs/mx6memcal.h @@ -28,8 +28,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #define CONFIG_MXC_USB_PORTSC PORT_PTS_UTMI diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 711b5a334a..5e95e430c4 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -140,8 +140,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h index 3fdf829e96..1a2160cce5 100644 --- a/include/configs/mx6sabreauto.h +++ b/include/configs/mx6sabreauto.h @@ -16,7 +16,7 @@ #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } +#define CFG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } #include "mx6sabre_common.h" @@ -26,7 +26,7 @@ #endif #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR +#define CFG_SYS_FLASH_BASE WEIM_ARB_BASE_ADDR #endif #define CFG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 3c2621d8c9..358d9f47c0 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -83,8 +83,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h index a3a12aeb39..6632e4ea29 100644 --- a/include/configs/mx6sllevk.h +++ b/include/configs/mx6sllevk.h @@ -83,8 +83,8 @@ #define PHYS_SDRAM_SIZE SZ_2G #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h index f0e239fdb6..0dd40563c2 100644 --- a/include/configs/mx6sxsabreauto.h +++ b/include/configs/mx6sxsabreauto.h @@ -79,8 +79,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* MMC Configuration */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index a0f9c537e5..6f5dffe4fb 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -107,8 +107,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* MMC Configuration */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h index 8199b4b831..cb1019bd56 100644 --- a/include/configs/mx6ul_14x14_evk.h +++ b/include/configs/mx6ul_14x14_evk.h @@ -109,8 +109,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h index 827385c65e..4154d328de 100644 --- a/include/configs/mx6ullevk.h +++ b/include/configs/mx6ullevk.h @@ -103,8 +103,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index c39b3572b8..6c165521f7 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -82,8 +82,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 362de482f5..85922fa436 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -18,7 +18,7 @@ /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1MHz from TSTMR */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Fixed at 1MHz from TSTMR */ /* UART */ #define LPUART_BASE LPUART4_RBASE @@ -48,8 +48,8 @@ "bootz ${loadaddr} - ${fdt_addr}; " \ "fi;\0" \ -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE SZ_256K #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index 9ef1eea5e6..99e01896c7 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -15,7 +15,7 @@ /* Using ULP WDOG for reset */ #define WDOG_BASE_ADDR WDG1_RBASE -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Fixed at 1Mhz from TSTMR */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Fixed at 1Mhz from TSTMR */ /* UART */ #define LPUART_BASE LPUART4_RBASE @@ -92,7 +92,7 @@ "bootz; " \ "fi;\0" \ -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE SZ_256K +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE SZ_256K #endif /* __CONFIG_H */ diff --git a/include/configs/mxs.h b/include/configs/mxs.h index 9d6b3d4048..5df080ade4 100644 --- a/include/configs/mxs.h +++ b/include/configs/mxs.h @@ -46,11 +46,11 @@ /* Memory sizes */ /* OCRAM at 0x0 ; 32kB on MX23 ; 128kB on MX28 */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x00000000 +#define CFG_SYS_INIT_RAM_ADDR 0x00000000 #if defined(CONFIG_MX23) -#define CONFIG_SYS_INIT_RAM_SIZE (32 * 1024) +#define CFG_SYS_INIT_RAM_SIZE (32 * 1024) #elif defined(CONFIG_MX28) -#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024) +#define CFG_SYS_INIT_RAM_SIZE (128 * 1024) #endif /* Point initial SP in SRAM so SPL can use it too. */ diff --git a/include/configs/mys_6ulx.h b/include/configs/mys_6ulx.h index cdd12866ac..a32fcd57f8 100644 --- a/include/configs/mys_6ulx.h +++ b/include/configs/mys_6ulx.h @@ -23,8 +23,8 @@ #define PHYS_SDRAM_SIZE SZ_256M #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ #define CFG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 9d09811316..dd7f951319 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -91,8 +91,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 9ad4f59069..9c364adc63 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -47,7 +47,7 @@ */ #define CFG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } +#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } /* USB device configuration */ #define CONFIG_USB_DEVICE @@ -64,7 +64,7 @@ * Board ONENAND Info. */ -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CFG_SYS_ONENAND_BASE ONENAND_MAP /* Environment information */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -150,7 +150,7 @@ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). * This rate is divided by a local divisor. */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CFG_SYS_TIMERBASE (OMAP34XX_GPT2) /* * Physical Memory Map @@ -162,8 +162,8 @@ */ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CFG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CFG_SYS_INIT_RAM_SIZE 0x800 /* * Attached kernel image diff --git a/include/configs/novena.h b/include/configs/novena.h index 8d39d75a42..6f588f99c3 100644 --- a/include/configs/novena.h +++ b/include/configs/novena.h @@ -31,8 +31,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* I2C */ #define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h index 080c659b6e..09c4ddb664 100644 --- a/include/configs/npi_imx6ull.h +++ b/include/configs/npi_imx6ull.h @@ -24,8 +24,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ #define CFG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/nsim.h b/include/configs/nsim.h index b930a53864..013a3491a3 100644 --- a/include/configs/nsim.h +++ b/include/configs/nsim.h @@ -12,8 +12,8 @@ * Memory configuration */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE SZ_256M /* diff --git a/include/configs/o4-imx6ull-nano.h b/include/configs/o4-imx6ull-nano.h index 5ac951a370..ea1edab9fc 100644 --- a/include/configs/o4-imx6ull-nano.h +++ b/include/configs/o4-imx6ull-nano.h @@ -8,8 +8,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #if IS_ENABLED(CONFIG_CMD_USB) # define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) diff --git a/include/configs/octeon_common.h b/include/configs/octeon_common.h index b475354bbc..c0ea9e852d 100644 --- a/include/configs/octeon_common.h +++ b/include/configs/octeon_common.h @@ -8,10 +8,10 @@ #define __OCTEON_COMMON_H__ #if defined(CONFIG_RAM_OCTEON) -#define CONFIG_SYS_INIT_SP_OFFSET 0x20180000 +#define CFG_SYS_INIT_SP_OFFSET 0x20180000 #else /* No DDR init -> run in L2 cache with limited resources */ -#define CONFIG_SYS_INIT_SP_OFFSET 0x00180000 +#define CFG_SYS_INIT_SP_OFFSET 0x00180000 #endif #define CFG_SYS_SDRAM_BASE 0xffffffff80000000 diff --git a/include/configs/odroid.h b/include/configs/odroid.h index ce8ea583fa..8b00a27921 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -14,7 +14,7 @@ #include <configs/exynos4-common.h> #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE 0x10502000 +#define CFG_SYS_PL310_BASE 0x10502000 #endif #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 0890f51eff..f4e23bbb0f 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -20,7 +20,7 @@ /* NAND */ #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE +#define CFG_SYS_FLASH_BASE NAND_BASE #define CFG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CFG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 6eec955e88..8bb8521f1c 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -25,7 +25,7 @@ /* NAND */ #if defined(CONFIG_MTD_RAW_NAND) -#define CONFIG_SYS_FLASH_BASE NAND_BASE +#define CFG_SYS_FLASH_BASE NAND_BASE #define CFG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\ 10, 11, 12, 13} #define CFG_SYS_NAND_ECCSIZE 512 diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 10f6ba6360..a6b5e55b54 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -66,8 +66,8 @@ BOOTENV /* OneNAND config */ -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP -#define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024) +#define CFG_SYS_ONENAND_BASE ONENAND_MAP +#define CFG_SYS_ONENAND_BLOCK_SIZE (128*1024) /* NAND config */ #define CFG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 6001037ae8..3895537751 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -144,9 +144,9 @@ /* **** PISMO SUPPORT *** */ #if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CFG_SYS_FLASH_BASE 0x10000000 #endif -#define CONFIG_SYS_FLASH_SIZE 0x4000000 +#define CFG_SYS_FLASH_SIZE 0x4000000 #endif /* __CONFIG_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 883cc0b99c..1634db8606 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,8 +37,8 @@ /* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X -#define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 -#define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 +#define CFG_SYS_I2C_TCA642X_BUS_NUM 4 +#define CFG_SYS_I2C_TCA642X_ADDR 0x22 /* Enabled commands */ diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index 5b0d87a336..788a111386 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -17,9 +17,9 @@ /* * SoC Configuration */ -#define CONFIG_SYS_OSCIN_FREQ 24000000 -#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CFG_SYS_OSCIN_FREQ 24000000 +#define CFG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CFG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) /* * Memory Info @@ -32,7 +32,7 @@ /* memtest will be run on 16MB */ -#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ +#define CFG_SYS_DA850_SYSCFG_SUSPSRC ( \ DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ DAVINCI_SYSCFG_SUSPSRC_SPI1 | \ DAVINCI_SYSCFG_SUSPSRC_UART2 | \ @@ -44,17 +44,17 @@ */ /* Requires CONFIG_SYS_DA850_PLL0_POSTDIV=0, set in Kconfig */ -#define CONFIG_SYS_DA850_PLL0_PLLM 18 -#define CONFIG_SYS_DA850_PLL1_PLLM 21 +#define CFG_SYS_DA850_PLL0_PLLM 18 +#define CFG_SYS_DA850_PLL1_PLLM 21 /* * DDR2 memory configuration */ -#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ +#define CFG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ DV_DDR_PHY_EXT_STRBEN | \ (0x5 << DV_DDR_PHY_RD_LATENCY_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ +#define CFG_SYS_DA850_DDR2_SDBCR ( \ (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ @@ -64,9 +64,9 @@ (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */ -#define CONFIG_SYS_DA850_DDR2_SDBCR2 0 +#define CFG_SYS_DA850_DDR2_SDBCR2 0 -#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ +#define CFG_SYS_DA850_DDR2_SDTIMR ( \ (19 << DV_DDR_SDTMR1_RFC_SHIFT) | \ (1 << DV_DDR_SDTMR1_RP_SHIFT) | \ (1 << DV_DDR_SDTMR1_RCD_SHIFT) | \ @@ -76,7 +76,7 @@ (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ (1 << DV_DDR_SDTMR1_WTR_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ +#define CFG_SYS_DA850_DDR2_SDTIMR2 ( \ (7 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ @@ -85,21 +85,21 @@ (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \ (2 << DV_DDR_SDTMR2_CKE_SHIFT)) -#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000492 -#define CONFIG_SYS_DA850_DDR2_PBBPR 0x30 +#define CFG_SYS_DA850_DDR2_SDRCR 0x00000492 +#define CFG_SYS_DA850_DDR2_PBBPR 0x30 /* * Serial Driver info */ #define CFG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) -#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE -#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) +#define CFG_SYS_SPI_BASE DAVINCI_SPI1_BASE +#define CFG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) /* * I2C Configuration */ -#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20 +#define CFG_SYS_I2C_EXPANDER_ADDR 0x20 /* * Flash & Environment diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h index 53889d699b..e42a736136 100644 --- a/include/configs/opos6uldev.h +++ b/include/configs/opos6uldev.h @@ -15,8 +15,8 @@ /* Physical Memory Map */ #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* USB */ #ifdef CONFIG_USB_EHCI_MX6 diff --git a/include/configs/p1_p2_bootsrc.h b/include/configs/p1_p2_bootsrc.h index d155e553e2..c96deda61d 100644 --- a/include/configs/p1_p2_bootsrc.h +++ b/include/configs/p1_p2_bootsrc.h @@ -7,11 +7,11 @@ #include <linux/stringify.h> -#if !defined(CONFIG_SYS_SPD_BUS_NUM) || !defined(CONFIG_SYS_I2C_PCA9557_ADDR) -#error "CONFIG_SYS_SPD_BUS_NUM and CONFIG_SYS_I2C_PCA9557_ADDR are required" +#if !defined(CONFIG_SYS_SPD_BUS_NUM) || !defined(CFG_SYS_I2C_PCA9557_ADDR) +#error "CONFIG_SYS_SPD_BUS_NUM and CFG_SYS_I2C_PCA9557_ADDR are required" #endif -#define __BOOTSRC_CMD(src, msk) i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 1 src 1; i2c mw CONFIG_SYS_I2C_PCA9557_ADDR 3 msk 1 +#define __BOOTSRC_CMD(src, msk) i2c dev CONFIG_SYS_SPD_BUS_NUM; i2c mw CFG_SYS_I2C_PCA9557_ADDR 1 src 1; i2c mw CFG_SYS_I2C_PCA9557_ADDR 3 msk 1 #define __VAR_CMD(var, cmd) __stringify(var=cmd\0) #define __VAR_CMD_RST(var, cmd) __VAR_CMD(var, cmd; reset) diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 14d702e1ef..e8b752785b 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -83,19 +83,19 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_MMC_U_BOOT_DST CONFIG_TEXT_BASE -#define CONFIG_SYS_MMC_U_BOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_MMC_U_BOOT_DST CONFIG_TEXT_BASE +#define CFG_SYS_MMC_U_BOOT_START CONFIG_TEXT_BASE #ifdef CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR -#define CONFIG_SYS_MMC_U_BOOT_OFFS (CONFIG_SPL_PAD_TO - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA*512) +#define CFG_SYS_MMC_U_BOOT_OFFS (CONFIG_SPL_PAD_TO - CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA*512) #else -#define CONFIG_SYS_MMC_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CFG_SYS_MMC_U_BOOT_OFFS CONFIG_SPL_PAD_TO #endif #elif defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) -#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_TEXT_BASE -#define CONFIG_SYS_SPI_FLASH_U_BOOT_START CONFIG_TEXT_BASE -#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CFG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CFG_SYS_SPI_FLASH_U_BOOT_DST CONFIG_TEXT_BASE +#define CFG_SYS_SPI_FLASH_U_BOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_SPI_FLASH_U_BOOT_OFFS CONFIG_SPL_PAD_TO #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD #define CFG_SYS_NAND_U_BOOT_SIZE (832 << 10) @@ -118,8 +118,8 @@ */ #define CONFIG_L2_CACHE -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0xffe00000 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ #define SPD_EEPROM_ADDRESS 0x52 @@ -130,40 +130,40 @@ #define CFG_SYS_SDRAM_SIZE_LAW LAW_SIZE_1G #endif #define CFG_SYS_SDRAM_SIZE (1u << (CFG_SYS_SDRAM_SIZE_LAW - 19)) -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE /* Default settings for DDR3 */ #ifndef CONFIG_TARGET_P2020RDB -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007f -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 - -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 - -#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655A608 -#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ -#define CONFIG_SYS_DDR_CONTROL_2 0x04401050 -#define CONFIG_SYS_DDR_TIMING_4 0x00220001 -#define CONFIG_SYS_DDR_TIMING_5 0x03402400 - -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x00330004 -#define CONFIG_SYS_DDR_TIMING_1 0x6f6B4846 -#define CONFIG_SYS_DDR_TIMING_2 0x0FA8C8CF -#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 -#define CONFIG_SYS_DDR_MODE_1 0x40461520 -#define CONFIG_SYS_DDR_MODE_2 0x8000c000 -#define CONFIG_SYS_DDR_INTERVAL 0x0C300000 +#define CFG_SYS_DDR_CS0_BNDS 0x0000003f +#define CFG_SYS_DDR_CS0_CONFIG 0x80014302 +#define CFG_SYS_DDR_CS0_CONFIG_2 0x00000000 +#define CFG_SYS_DDR_CS1_BNDS 0x0040007f +#define CFG_SYS_DDR_CS1_CONFIG 0x80014302 +#define CFG_SYS_DDR_CS1_CONFIG_2 0x00000000 + +#define CFG_SYS_DDR_INIT_ADDR 0x00000000 +#define CFG_SYS_DDR_INIT_EXT_ADDR 0x00000000 +#define CFG_SYS_DDR_MODE_CONTROL 0x00000000 + +#define CFG_SYS_DDR_ZQ_CONTROL 0x89080600 +#define CFG_SYS_DDR_WRLVL_CONTROL 0x8655A608 +#define CFG_SYS_DDR_SR_CNTR 0x00000000 +#define CFG_SYS_DDR_RCW_1 0x00000000 +#define CFG_SYS_DDR_RCW_2 0x00000000 +#define CFG_SYS_DDR_CONTROL 0xC70C0000 /* Type = DDR3 */ +#define CFG_SYS_DDR_CONTROL_2 0x04401050 +#define CFG_SYS_DDR_TIMING_4 0x00220001 +#define CFG_SYS_DDR_TIMING_5 0x03402400 + +#define CFG_SYS_DDR_TIMING_3 0x00020000 +#define CFG_SYS_DDR_TIMING_0 0x00330004 +#define CFG_SYS_DDR_TIMING_1 0x6f6B4846 +#define CFG_SYS_DDR_TIMING_2 0x0FA8C8CF +#define CFG_SYS_DDR_CLK_CTRL 0x03000000 +#define CFG_SYS_DDR_MODE_1 0x40461520 +#define CFG_SYS_DDR_MODE_2 0x8000c000 +#define CFG_SYS_DDR_INTERVAL 0x0C300000 #endif /* @@ -186,23 +186,23 @@ * Local Bus Definitions */ #if defined(CONFIG_TARGET_P1020RDB_PD) -#define CONFIG_SYS_FLASH_BASE 0xec000000 +#define CFG_SYS_FLASH_BASE 0xec000000 #else -#define CONFIG_SYS_FLASH_BASE 0xef000000 +#define CFG_SYS_FLASH_BASE 0xef000000 #endif #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#define CFG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CFG_SYS_FLASH_BASE) #else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE #endif -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) \ | BR_PS_16 | BR_V) #define CONFIG_FLASH_OR_PRELIM 0xfc000ff7 -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE_PHYS} #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ /* Nand Flash */ @@ -241,42 +241,42 @@ #endif #endif /* CONFIG_NAND_FSL_ELBC */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ +#define CFG_SYS_INIT_RAM_ADDR 0xffd00000 /* stack in RAM */ #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW CFG_SYS_INIT_RAM_ADDR /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) #else /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#define CFG_SYS_INIT_RAM_ADDR_PHYS CFG_SYS_INIT_RAM_ADDR +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW CFG_SYS_INIT_RAM_ADDR_PHYS #endif /* Size of used area in RAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_CPLD_BASE 0xffa00000 +#define CFG_SYS_CPLD_BASE 0xffa00000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_CPLD_BASE_PHYS 0xfffa00000ull +#define CFG_SYS_CPLD_BASE_PHYS 0xfffa00000ull #else -#define CONFIG_SYS_CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE +#define CFG_SYS_CPLD_BASE_PHYS CFG_SYS_CPLD_BASE #endif /* CPLD config size: 1Mb */ /* Vsc7385 switch */ #ifdef CONFIG_VSC7385_ENET #define __VSCFW_ADDR "vscfw_addr=ef000000\0" -#define CONFIG_SYS_VSC7385_BASE 0xffb00000 +#define CFG_SYS_VSC7385_BASE 0xffb00000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull +#define CFG_SYS_VSC7385_BASE_PHYS 0xfffb00000ull #else -#define CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BASE +#define CFG_SYS_VSC7385_BASE_PHYS CFG_SYS_VSC7385_BASE #endif /* The size of the VSC7385 firmware image */ @@ -292,18 +292,18 @@ */ #if defined(CONFIG_SPL_BUILD) #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #elif defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #else -#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CFG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR +#define CFG_SYS_INIT_L2_END (CFG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) #endif /* CONFIG_TPL_BUILD */ #endif #endif @@ -315,15 +315,15 @@ #undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_SYS_NS16550_CLK get_bus_freq(0) -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} -#define CFG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) -#define CFG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR+0x4500) +#define CFG_SYS_NS16550_COM2 (CFG_SYS_CCSRBAR+0x4600) /* I2C */ #if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_NOPROBES { {0, 0x29} } +#define CFG_SYS_I2C_NOPROBES { {0, 0x29} } #endif /* @@ -331,8 +331,8 @@ */ #define CONFIG_RTC_PT7C4338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_I2C_PCA9557_ADDR 0x18 +#define CFG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_PCA9557_ADDR 0x18 /* enable read and write access to EEPROM */ @@ -397,7 +397,7 @@ */ #if defined(CONFIG_MTD_RAW_NAND) #ifdef CONFIG_TPL_BUILD -#define SPL_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#define SPL_ENV_ADDR (CFG_SYS_INIT_L2_ADDR + (160 << 10)) #endif #endif @@ -418,7 +418,7 @@ * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ /* * Environment Configuration diff --git a/include/configs/pcl063.h b/include/configs/pcl063.h index 85cedde098..2a1660bf18 100644 --- a/include/configs/pcl063.h +++ b/include/configs/pcl063.h @@ -35,8 +35,8 @@ #define PHYS_SDRAM_SIZE SZ_256M #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ #define CFG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/pcl063_ull.h b/include/configs/pcl063_ull.h index f7e36f22ce..4421e740d9 100644 --- a/include/configs/pcl063_ull.h +++ b/include/configs/pcl063_ull.h @@ -37,8 +37,8 @@ #define PHYS_SDRAM_SIZE SZ_256M #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* NAND */ #define CFG_SYS_NAND_BASE 0x40000000 diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 586cddf418..5c2ff5d02e 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -119,8 +119,8 @@ #define PHYS_SDRAM_SIZE (CONFIG_PCM052_DDR_SIZE * SZ_1M) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h index cf705dcb19..3674e4cdda 100644 --- a/include/configs/pcm058.h +++ b/include/configs/pcm058.h @@ -16,8 +16,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ #define ENV_MMC \ diff --git a/include/configs/pg-wcom-expu1.h b/include/configs/pg-wcom-expu1.h index e08d941412..1b72739d14 100644 --- a/include/configs/pg-wcom-expu1.h +++ b/include/configs/pg-wcom-expu1.h @@ -13,23 +13,23 @@ #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" /* CLIPS FPGA Definitions */ -#define CONFIG_SYS_CSPR3_EXT (0x00) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \ +#define CFG_SYS_CSPR3_EXT (0x00) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CLIPS_BASE) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ +#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CFG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ CSOR_GPCM_TRHZ_40) -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ FTIM0_GPCM_TEADC(0x7) | \ FTIM0_GPCM_TEAHC(0x2)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ FTIM1_GPCM_TRAD(0x12)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x12)) -#define CONFIG_SYS_CS3_FTIM3 0x04000000 +#define CFG_SYS_CS3_FTIM3 0x04000000 /* PRST */ #define WCOM_CLIPS_RST 0 diff --git a/include/configs/pg-wcom-seli8.h b/include/configs/pg-wcom-seli8.h index 9a7669c940..e4bcae5bb5 100644 --- a/include/configs/pg-wcom-seli8.h +++ b/include/configs/pg-wcom-seli8.h @@ -12,23 +12,23 @@ #define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" /* PAXK FPGA Definitions */ -#define CONFIG_SYS_CSPR3_EXT (0x00) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \ +#define CFG_SYS_CSPR3_EXT (0x00) +#define CFG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \ CSPR_PORT_SIZE_8 | \ CSPR_MSEL_GPCM | \ CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) -#define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ +#define CFG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CFG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ CSOR_GPCM_TRHZ_40) -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ +#define CFG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ FTIM0_GPCM_TEADC(0x7) | \ FTIM0_GPCM_TEAHC(0x2)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ +#define CFG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ FTIM1_GPCM_TRAD(0x12)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ +#define CFG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ FTIM2_GPCM_TCH(0x1) | \ FTIM2_GPCM_TWP(0x12)) -#define CONFIG_SYS_CS3_FTIM3 0x04000000 +#define CFG_SYS_CS3_FTIM3 0x04000000 /* PRST */ #define KM_LIU_RST 0 diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index ac68c933a0..7f73117ac1 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -11,7 +11,7 @@ #include <linux/stringify.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -60,8 +60,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_512K #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index aedaf806e5..11a833bb12 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -10,7 +10,7 @@ #include <linux/sizes.h> #include <asm/arch/imx-regs.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -59,8 +59,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_512K #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index d9abbbc28b..3cc2a693ce 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -18,9 +18,9 @@ * Memory Layout */ /* Initial RAM for temporary stack, global data */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_INIT_RAM_ADDR \ - (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CONFIG_SYS_INIT_RAM_SIZE) +#define CFG_SYS_INIT_RAM_SIZE 0x10000 +#define CFG_SYS_INIT_RAM_ADDR \ + (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE - CFG_SYS_INIT_RAM_SIZE) /* SDRAM Configuration (for final code, data, stack, heap) */ #define CFG_SYS_SDRAM_BASE 0x88000000 diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h index fc2cab960c..9e6c210c40 100644 --- a/include/configs/pico-imx6.h +++ b/include/configs/pico-imx6.h @@ -92,8 +92,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h index 22b4976d72..8af8883fad 100644 --- a/include/configs/pico-imx6ul.h +++ b/include/configs/pico-imx6ul.h @@ -92,8 +92,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #ifdef CONFIG_VIDEO #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index f5b9eed2bc..7028264d72 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -94,8 +94,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* PMIC */ #define CONFIG_POWER_PFUZE3000 diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index 91baff9638..f9301a5524 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -63,8 +63,8 @@ /* Link Definitions */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x80000 +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE 0x80000 #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 3fbddd903a..a233fb8ed7 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -22,47 +22,47 @@ #define MASTER_PLL_DIV 15 #define MASTER_PLL_MUL 162 #define MAIN_PLL_DIV 2 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* clocks */ /* CKGR_MOR - enable main osc. */ -#define CONFIG_SYS_MOR_VAL \ +#define CFG_SYS_MOR_VAL \ (AT91_PMC_MOR_MOSCEN | \ (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ +#define CFG_SYS_PLLAR_VAL \ (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ AT91_PMC_PLLXR_OUT(3) | \ ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ +#define CFG_SYS_MCKR1_VAL \ (AT91_PMC_MCKR_CSS_SLOW | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ +#define CFG_SYS_MCKR2_VAL \ (AT91_PMC_MCKR_CSS_PLLA | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 +#define CFG_SYS_PIOC_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 +#define CFG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 /* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ -#define CONFIG_SYS_MATRIX_EBICSA_VAL \ +#define CFG_SYS_MATRIX_EBICSA_VAL \ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL +#define CFG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL /* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x13C +#define CFG_SYS_SDRC_TR_VAL1 0x13C /* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ +#define CFG_SYS_SDRC_CR_VAL \ (AT91_SDRAMC_NC_9 | \ AT91_SDRAMC_NR_13 | \ AT91_SDRAMC_NB_4 | \ @@ -76,10 +76,10 @@ (1 << 28)) /* Exit Self Refresh to Active Delay */ /* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CFG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CFG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE #define CFG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CFG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH #define CFG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ @@ -88,37 +88,37 @@ #define CFG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CFG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR #define CFG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CFG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL #define CFG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CFG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ #define CFG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ +#define CFG_SYS_SMC0_SETUP0_VAL \ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ +#define CFG_SYS_SMC0_PULSE0_VAL \ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ +#define CFG_SYS_SMC0_CYCLE0_VAL \ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ +#define CFG_SYS_SMC0_MODE0_VAL \ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ AT91_SMC_MODE_DBW_16 | \ AT91_SMC_MODE_TDF | \ AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ +#define CFG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ AT91_RSTC_CR_PROCRST | \ AT91_RSTC_MR_ERSTL(1) | \ AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ +#define CFG_SYS_WDTC_WDMR_VAL \ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ AT91_WDT_MR_WDV(0xfff) | \ AT91_WDT_MR_WDDIS | \ @@ -139,10 +139,10 @@ /* NOR flash */ #define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 /* USB */ -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CFG_SYS_USB_OHCI_REGS_BASE 0x00500000 #define CONFIG_EXTRA_ENV_SETTINGS \ "partition=nand0,0\0" \ diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index c1f6334d6a..9fd897958a 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -22,14 +22,14 @@ #define MASTER_PLL_DIV 6 #define MASTER_PLL_MUL 65 #define MAIN_PLL_DIV 2 /* 2 or 4 */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ /* clocks */ -#define CONFIG_SYS_MOR_VAL \ +#define CFG_SYS_MOR_VAL \ (AT91_PMC_MOR_MOSCEN | \ (255 << 8)) /* Main Oscillator Start-up Time */ -#define CONFIG_SYS_PLLAR_VAL \ +#define CFG_SYS_PLLAR_VAL \ (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \ AT91_PMC_PLLXR_OUT(3) | \ AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\ @@ -38,43 +38,43 @@ #if (MAIN_PLL_DIV == 2) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ +#define CFG_SYS_MCKR1_VAL \ (AT91_PMC_MCKR_CSS_SLOW | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) /* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ +#define CFG_SYS_MCKR2_VAL \ (AT91_PMC_MCKR_CSS_PLLA | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_2) #else /* PCK/4 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ +#define CFG_SYS_MCKR1_VAL \ (AT91_PMC_MCKR_CSS_SLOW | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_4) /* PCK/4 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ +#define CFG_SYS_MCKR2_VAL \ (AT91_PMC_MCKR_CSS_PLLA | \ AT91_PMC_MCKR_PRES_1 | \ AT91_PMC_MCKR_MDIV_4) #endif /* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 +#define CFG_SYS_PIOD_PDR_VAL1 0xFFFF0000 /* no pull-up for D[31:16] */ -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 +#define CFG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 /* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ +#define CFG_SYS_MATRIX_EBI0CSA_VAL \ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ AT91_MATRIX_CSA_EBI_CS1A) /* SDRAM */ /* SDRAMC_MR Mode register */ -#define CONFIG_SYS_SDRC_MR_VAL1 0 +#define CFG_SYS_SDRC_MR_VAL1 0 /* SDRAMC_TR - Refresh Timer register */ -#define CONFIG_SYS_SDRC_TR_VAL1 0x3AA +#define CFG_SYS_SDRC_TR_VAL1 0x3AA /* SDRAMC_CR - Configuration register*/ -#define CONFIG_SYS_SDRC_CR_VAL \ +#define CFG_SYS_SDRC_CR_VAL \ (AT91_SDRAMC_NC_9 | \ AT91_SDRAMC_NR_13 | \ AT91_SDRAMC_NB_4 | \ @@ -88,10 +88,10 @@ (8 << 28)) /* tXSR - Exit Self Refresh to Active Delay */ /* Memory Device Register -> SDRAM */ -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CFG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CFG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE #define CFG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CFG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH #define CFG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ @@ -100,37 +100,37 @@ #define CFG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ #define CFG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CFG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR #define CFG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CFG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL #define CFG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CFG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ #define CFG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ /* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ +#define CFG_SYS_SMC0_SETUP0_VAL \ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ +#define CFG_SYS_SMC0_PULSE0_VAL \ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ +#define CFG_SYS_SMC0_CYCLE0_VAL \ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ +#define CFG_SYS_SMC0_MODE0_VAL \ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ AT91_SMC_MODE_DBW_16 | \ AT91_SMC_MODE_TDF | \ AT91_SMC_MODE_TDF_CYCLE(6)) /* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ +#define CFG_SYS_RSTC_RMR_VAL \ (AT91_RSTC_KEY | \ AT91_RSTC_CR_PROCRST | \ AT91_RSTC_MR_ERSTL(1) | \ AT91_RSTC_MR_ERSTL(2)) /* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ +#define CFG_SYS_WDTC_WDMR_VAL \ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ AT91_WDT_MR_WDV(0xfff) | \ AT91_WDT_MR_WDDIS | \ @@ -142,7 +142,7 @@ /* NOR flash, if populated */ #define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CFG_SYS_FLASH_BASE PHYS_FLASH_1 /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -166,7 +166,7 @@ AT91_MATRIX_SCFG_SLOT_CYCLE(255)) /* USB */ -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ +#define CFG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* AT91SAM9263_UHP_BASE */ #define CONFIG_EXTRA_ENV_SETTINGS \ "partition=nand0,0\0" \ diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 4a0a16818e..686411eee2 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -16,8 +16,8 @@ #define __CONFIG_H /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x70000000 @@ -53,9 +53,9 @@ 56, 57, 58, 59, 60, 61, 62, 63, } #endif -#define CONFIG_SYS_MASTER_CLOCK 132096000 -#define CONFIG_SYS_AT91_PLLA 0x20c73f03 -#define CONFIG_SYS_MCKR 0x1301 -#define CONFIG_SYS_MCKR_CSS 0x1302 +#define CFG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_AT91_PLLA 0x20c73f03 +#define CFG_SYS_MCKR 0x1301 +#define CFG_SYS_MCKR_CSS 0x1302 #endif diff --git a/include/configs/poleg.h b/include/configs/poleg.h index 365fdd30c0..518d7a3639 100644 --- a/include/configs/poleg.h +++ b/include/configs/poleg.h @@ -7,10 +7,10 @@ #define __CONFIG_POLEG_H #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/ +#define CFG_SYS_PL310_BASE 0xF03FC000 /* L2 - Cache Regs Base (4k Space)*/ #endif -#define CONFIG_SYS_BOOTMAPSZ (0x30 << 20) +#define CFG_SYS_BOOTMAPSZ (0x30 << 20) #define CFG_SYS_SDRAM_BASE 0x0 /* Default environemnt variables */ diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index bee1ef6494..2b25c31b1d 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -9,8 +9,8 @@ #define __PRESIDIO_ASIC_H /* Generic Timer Definitions */ -#define CONFIG_SYS_TIMER_RATE 25000000 -#define CONFIG_SYS_TIMER_COUNTER 0xf4321008 +#define CFG_SYS_TIMER_RATE 25000000 +#define CFG_SYS_TIMER_COUNTER 0xf4321008 /* note: arch/arm/cpu/armv8/start.S which references GICD_BASE/GICC_BASE * does not yet support DT. Thus define it here. @@ -18,7 +18,7 @@ #define GICD_BASE 0xf7011000 #define GICC_BASE 0xf7012000 -#define CONFIG_SYS_TIMER_BASE 0xf4321000 +#define CFG_SYS_TIMER_BASE 0xf4321000 /* Use external clock source */ #define PRESIDIO_APB_CLK 125000000 @@ -26,11 +26,11 @@ /* Cortina Serial Configuration */ #define CORTINA_UART_CLOCK (PRESIDIO_APB_CLK) -#define CORTINA_SERIAL_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1} +#define CORTINA_SERIAL_PORTS {(void *)CFG_SYS_SERIAL0, \ + (void *)CFG_SYS_SERIAL1} -#define CONFIG_SYS_SERIAL0 PER_UART0_CFG -#define CONFIG_SYS_SERIAL1 PER_UART1_CFG +#define CFG_SYS_SERIAL0 PER_UART0_CFG +#define CFG_SYS_SERIAL1 PER_UART1_CFG /* SDRAM Bank #1 */ #define DDR_BASE 0x00000000 @@ -58,7 +58,7 @@ /* nand driver parameters */ #ifdef CONFIG_TARGET_PRESIDIO_ASIC - #define CFG_SYS_NAND_BASE CONFIG_SYS_FLASH_BASE + #define CFG_SYS_NAND_BASE CFG_SYS_FLASH_BASE #define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE } #endif diff --git a/include/configs/qcs404-evb.h b/include/configs/qcs404-evb.h index 58020ae95b..c41bb341d8 100644 --- a/include/configs/qcs404-evb.h +++ b/include/configs/qcs404-evb.h @@ -11,7 +11,7 @@ #include <linux/sizes.h> #include <asm/arch/sysmap-qcs404.h> -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } +#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x5000000\0" \ diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index e7c810957d..aa9cae017d 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -12,39 +12,39 @@ /* Needed to fill the ccsrbar pointer */ /* Virtual address to CCSRBAR */ -#define CONFIG_SYS_CCSRBAR 0xe0000000 +#define CFG_SYS_CCSRBAR 0xe0000000 /* Physical address should be a function call */ #ifndef __ASSEMBLY__ extern unsigned long long get_phys_ccsrbar_addr_early(void); -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32) -#define CONFIG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early() +#define CFG_SYS_CCSRBAR_PHYS_HIGH (get_phys_ccsrbar_addr_early() >> 32) +#define CFG_SYS_CCSRBAR_PHYS_LOW get_phys_ccsrbar_addr_early() #else -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0x0 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR #endif /* Virtual address to a temporary map if we need it (max 128MB) */ -#define CONFIG_SYS_TMPVIRT 0xe8000000 +#define CFG_SYS_TMPVIRT 0xe8000000 /* * DDR Setup */ #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CONFIG_HWCONFIG -#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000 +#define CFG_SYS_INIT_RAM_ADDR 0x00100000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0 +#define CFG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000 /* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 +#define CFG_SYS_INIT_RAM_ADDR_PHYS \ + ((CFG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CFG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CFG_SYS_INIT_RAM_SIZE 0x00004000 -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* RTC */ #define CONFIG_RTC_PT7C4338 @@ -58,7 +58,7 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); * have to be in the first 64 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CFG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ /* * Environment Configuration diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index f6ee7201eb..bad74cc620 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -10,12 +10,12 @@ #define CFG_SYS_SDRAM_SIZE 0x04000000 /* Address of u-boot image in Flash */ -#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) +#define CFG_SYS_BOOTMAPSZ (8 * 1024 * 1024) /* * NOR Flash ( Spantion S29GL256P ) */ -#define CONFIG_SYS_FLASH_BASE (0xA0000000) -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#define CFG_SYS_FLASH_BASE (0xA0000000) +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /* __CONFIG_H */ diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 606a0a7ecd..a86180ead5 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -15,14 +15,14 @@ #endif /* console */ -#define CONFIG_SYS_BAUDRATE_TABLE { 38400, 115200 } +#define CFG_SYS_BAUDRATE_TABLE { 38400, 115200 } #define CFG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE) #define CFG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE) /* Timer */ #define CONFIG_TMU_TIMER -#define CONFIG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ -#define CONFIG_SYS_TIMER_RATE (get_board_sys_clk() / 8) +#define CFG_SYS_TIMER_COUNTER (TMU_BASE + 0xc) /* TCNT0 */ +#define CFG_SYS_TIMER_RATE (get_board_sys_clk() / 8) #endif /* __RCAR_GEN2_COMMON_H */ diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index 5853072597..e9cbd25382 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -18,7 +18,7 @@ #define GICC_BASE 0xF1020000 /* console */ -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400 } +#define CFG_SYS_BAUDRATE_TABLE { 115200, 38400 } /* PHY needs a longer autoneg timeout */ #define PHY_ANEG_TIMEOUT 20000 diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index b4c1972747..a4cae69718 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -8,7 +8,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_HZ_CLOCK 24000000 +#define CFG_SYS_HZ_CLOCK 24000000 #define CFG_SYS_SDRAM_BASE 0x60000000 #define SDRAM_BANK_SIZE (512UL << 20UL) diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index fac27a7d27..302546630a 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -8,7 +8,7 @@ #include "rockchip-common.h" -#define CONFIG_SYS_HZ_CLOCK 24000000 +#define CFG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index 6889ba591b..58ad62afe1 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -8,7 +8,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_HZ_CLOCK 24000000 +#define CFG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0x10080000 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 4aa7e0449d..6b55c57dd7 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -9,7 +9,7 @@ #include <asm/arch-rockchip/hardware.h> #include "rockchip-common.h" -#define CONFIG_SYS_HZ_CLOCK 24000000 +#define CFG_SYS_HZ_CLOCK 24000000 #define CONFIG_IRAM_BASE 0xff700000 diff --git a/include/configs/rpi.h b/include/configs/rpi.h index 2c24944d9c..e354927513 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -17,14 +17,14 @@ /* Use SoC timer for AArch32, but architected timer for AArch64 */ #ifndef CONFIG_ARM64 -#define CONFIG_SYS_TIMER_RATE 1000000 -#define CONFIG_SYS_TIMER_COUNTER \ +#define CFG_SYS_TIMER_RATE 1000000 +#define CFG_SYS_TIMER_COUNTER \ (&((struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR)->clo) #endif /* Memory layout */ #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_UBOOT_BASE CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE /* * The board really has 256M. However, the VC (VideoCore co-processor) shares * the RAM, and uses a configurable portion at the top. We tell U-Boot that a diff --git a/include/configs/rv1108_common.h b/include/configs/rv1108_common.h index 76836add30..84a5ae6965 100644 --- a/include/configs/rv1108_common.h +++ b/include/configs/rv1108_common.h @@ -10,10 +10,10 @@ #define CONFIG_IRAM_BASE 0x10080000 -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) +#define CFG_SYS_TIMER_RATE (24 * 1000 * 1000) /* TIMER1,initialized by ddr initialize code */ -#define CONFIG_SYS_TIMER_BASE 0x10350020 -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define CFG_SYS_TIMER_BASE 0x10350020 +#define CFG_SYS_TIMER_COUNTER (CFG_SYS_TIMER_BASE + 8) #define CFG_SYS_SDRAM_BASE 0x60000000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index ed891ab22a..3d49d52b38 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -124,6 +124,6 @@ /* FLASH and environment organization */ #define CONFIG_MMC_DEFAULT_DEV 0 -#define CONFIG_SYS_ONENAND_BASE 0xB0000000 +#define CFG_SYS_ONENAND_BASE 0xB0000000 #endif /* __CONFIG_H */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 614d04fda0..06be9c0f65 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -87,7 +87,7 @@ "mmcrootpart=3\0" \ "opts=always_resume=1" -#define CONFIG_SYS_ONENAND_BASE 0x0C000000 +#define CFG_SYS_ONENAND_BASE 0x0C000000 #ifndef __ASSEMBLY__ void universal_spi_scl(int bit); diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h index 41e52546ed..2e422cd241 100644 --- a/include/configs/salvator-x.h +++ b/include/configs/salvator-x.h @@ -14,7 +14,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } +#define CFG_SYS_WRITE_SWAPPED_DATA #endif /* __SALVATOR_X_H */ diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h index 75302bf5c0..f44ce909b9 100644 --- a/include/configs/sam9x60_curiosity.h +++ b/include/configs/sam9x60_curiosity.h @@ -10,8 +10,8 @@ #ifndef __CONFIG_H__ #define __CONFIG_H__ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID 0 /* ignored in arm */ diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index 22813d4c54..27b39ebf41 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -11,8 +11,8 @@ #define __CONFIG_H__ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */ #define CONFIG_USART_BASE ATMEL_BASE_DBGU #define CONFIG_USART_ID 0 /* ignored in arm */ diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 79f354d2e6..d62146e779 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -11,8 +11,8 @@ #include "at91-sama5_common.h" -#undef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ +#undef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ /* SPL */ diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h index f826eab9ff..1979cb366e 100644 --- a/include/configs/sama5d27_wlsom1_ek.h +++ b/include/configs/sama5d27_wlsom1_ek.h @@ -12,8 +12,8 @@ #include "at91-sama5_common.h" -#undef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ +#undef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 01ed1a3c8e..a072b21dfb 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -11,8 +11,8 @@ #include "at91-sama5_common.h" -#undef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#undef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/sama5d2_ptc_ek.h b/include/configs/sama5d2_ptc_ek.h index 2e3c1ea400..bf3c92bdf3 100644 --- a/include/configs/sama5d2_ptc_ek.h +++ b/include/configs/sama5d2_ptc_ek.h @@ -12,8 +12,8 @@ #include "at91-sama5_common.h" -#undef CONFIG_SYS_AT91_MAIN_CLOCK -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ +#undef CFG_SYS_AT91_MAIN_CLOCK +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 3f58928565..4f579ad9c5 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -27,7 +27,7 @@ /* NOR flash */ #ifdef CONFIG_MTD_NOR_FLASH -#define CONFIG_SYS_FLASH_BASE 0x10000000 +#define CFG_SYS_FLASH_BASE 0x10000000 #endif /* SDRAM */ diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 68fa31fe76..59f13edbc8 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -9,8 +9,8 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x60000000 #define CFG_SYS_SDRAM_SIZE 0x20000000 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 5a7f5e135b..1081e0bbc4 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -17,7 +17,7 @@ #define CFG_SYS_SDRAM_SIZE \ (SB_TO_UL(CONFIG_SANDBOX_RAM_SIZE_MB) << 20) -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} #ifndef SANDBOX_NO_SDL diff --git a/include/configs/sdm845.h b/include/configs/sdm845.h index af5fe27e68..f7cdd5a195 100644 --- a/include/configs/sdm845.h +++ b/include/configs/sdm845.h @@ -11,7 +11,7 @@ #include <linux/sizes.h> #include <asm/arch/sysmap-sdm845.h> -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } +#define CFG_SYS_BAUDRATE_TABLE { 115200, 230400, 460800, 921600 } #define CONFIG_EXTRA_ENV_SETTINGS \ "bootm_size=0x4000000\0" \ diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 31552f4619..5a001716fb 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -35,7 +35,7 @@ #define CFG_SYS_SDRAM_BASE PHYS_DRAM_1 /* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ /* NS16550 Configuration */ #define CFG_SYS_NS16550_CLK (48000000) diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index d2bc73a400..794475942a 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -36,8 +36,8 @@ */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432MHz crystal */ /* misc settings */ @@ -87,8 +87,8 @@ * leaving the correct space for initial global data structure above that * address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* Defines for SPL */ @@ -102,11 +102,11 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SYS_MASTER_CLOCK (198656000/2) +#define CFG_SYS_MASTER_CLOCK (198656000/2) #define AT91_PLL_LOCK_TIMEOUT 1000000 -#define CONFIG_SYS_AT91_PLLA 0x2060bf09 -#define CONFIG_SYS_MCKR 0x100 -#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) -#define CONFIG_SYS_AT91_PLLB 0x10483f0e +#define CFG_SYS_AT91_PLLA 0x2060bf09 +#define CFG_SYS_MCKR 0x100 +#define CFG_SYS_MCKR_CSS (0x02 | CFG_SYS_MCKR) +#define CFG_SYS_AT91_PLLB 0x10483f0e #endif /* __CONFIG_H */ diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 64963eebe5..ffa1a1fcb0 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -88,7 +88,7 @@ * Boot configuration */ -#define CONFIG_SYS_ONENAND_BASE 0xE7100000 +#define CFG_SYS_ONENAND_BASE 0xE7100000 /* * Ethernet Contoller driver diff --git a/include/configs/smegw01.h b/include/configs/smegw01.h index 44b9109d44..14f9cf5602 100644 --- a/include/configs/smegw01.h +++ b/include/configs/smegw01.h @@ -39,7 +39,7 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 9b1cb372ec..b7aa49ce43 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -15,16 +15,16 @@ #include <linux/sizes.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* CPU */ /* SDRAM */ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS6 #define CFG_SYS_SDRAM_SIZE (128 * 1024 * 1024) /* 64MB */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM +#define CFG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM /* Mem test settings */ diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 9551680079..afca7e18e9 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -15,7 +15,7 @@ * Clocks */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 +#define CFG_SYS_TIMERBASE OMAP34XX_GPT2 #define V_NS16550_CLK 48000000 #define V_OSCK 26000000 @@ -55,7 +55,7 @@ #define CFG_SYS_NS16550_CLK V_NS16550_CLK #define CFG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \ +#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \ 115200 } /* diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h index 49883ea7a3..35c777b774 100644 --- a/include/configs/socfpga_arria10_socdk.h +++ b/include/configs/socfpga_arria10_socdk.h @@ -18,7 +18,7 @@ /* * Serial / UART configurations */ -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} /* * L4 OSC1 Timer 0 diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index 261ae56c1d..29b4b22b39 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -10,7 +10,7 @@ #include <linux/stringify.h> /* Eternal oscillator */ -#define CONFIG_SYS_TIMER_RATE 40000000 +#define CFG_SYS_TIMER_RATE 40000000 /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512MiB on SECU1 */ @@ -21,7 +21,7 @@ * the last two bytes of the 128 bytes large NVRAM in the * RTC which begin at address 0x20 */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* Environment settings */ diff --git a/include/configs/socfpga_chameleonv3.h b/include/configs/socfpga_chameleonv3.h index 7012097276..aa13878177 100644 --- a/include/configs/socfpga_chameleonv3.h +++ b/include/configs/socfpga_chameleonv3.h @@ -17,7 +17,7 @@ /* * Serial / UART configurations */ -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} #define CONFIG_EXTRA_ENV_SETTINGS \ "autoload=no\0" \ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 7ef7c5da82..bbbdea6664 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -12,12 +12,12 @@ */ #define PHYS_SDRAM_1 0x0 #if defined(CONFIG_TARGET_SOCFPGA_GEN5) -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 -#define CONFIG_SYS_INIT_RAM_SIZE SOCFPGA_PHYS_OCRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR 0xFFFF0000 +#define CFG_SYS_INIT_RAM_SIZE SOCFPGA_PHYS_OCRAM_SIZE #elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10) -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 +#define CFG_SYS_INIT_RAM_ADDR 0xFFE00000 /* SPL memory allocation configuration, this is for FAT implementation */ -#define CONFIG_SYS_INIT_RAM_SIZE (SOCFPGA_PHYS_OCRAM_SIZE - \ +#define CFG_SYS_INIT_RAM_SIZE (SOCFPGA_PHYS_OCRAM_SIZE - \ CONFIG_SYS_SPL_MALLOC_SIZE) #endif @@ -27,9 +27,9 @@ * at this address to not overwrite the bootcounter by checking, if the * bootcounter address is located in the internal SRAM. */ -#if ((CONFIG_SYS_BOOTCOUNT_ADDR > CONFIG_SYS_INIT_RAM_ADDR) && \ - (CONFIG_SYS_BOOTCOUNT_ADDR < (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE))) +#if ((CONFIG_SYS_BOOTCOUNT_ADDR > CFG_SYS_INIT_RAM_ADDR) && \ + (CONFIG_SYS_BOOTCOUNT_ADDR < (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE))) #endif /* @@ -48,16 +48,16 @@ /* * Cache */ -#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS +#define CFG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS /* * L4 OSC1 Timer 0 */ #ifndef CONFIG_TIMER -#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) -#ifndef CONFIG_SYS_TIMER_RATE -#define CONFIG_SYS_TIMER_RATE 25000000 +#define CFG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS +#define CFG_SYS_TIMER_COUNTER (CFG_SYS_TIMERBASE + 0x4) +#ifndef CFG_SYS_TIMER_RATE +#define CFG_SYS_TIMER_RATE 25000000 #endif #endif diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 9403e2f430..47089f312d 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -26,8 +26,8 @@ /* * U-Boot run time memory configurations */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 +#define CFG_SYS_INIT_RAM_ADDR 0xFFE00000 +#define CFG_SYS_INIT_RAM_SIZE 0x40000 /* * U-Boot environment configurations diff --git a/include/configs/socrates.h b/include/configs/socrates.h index c628860eac..0a2d581517 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -42,20 +42,20 @@ */ #define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ +#define CFG_SYS_INIT_DBCR DBCR_IDM /* Enable Debug Exceptions */ -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ +#undef CFG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_CCSRBAR 0xE0000000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR 0xE0000000 +#define CFG_SYS_CCSRBAR_PHYS_LOW CFG_SYS_CCSRBAR /* DDR Setup */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CONFIG_VERY_BIG_RAM /* I2C addresses of SPD EEPROMs */ @@ -63,46 +63,46 @@ /* Hardcoded values, to use instead of SPD */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000000f -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 -#define CONFIG_SYS_DDR_TIMING_0 0x00260802 -#define CONFIG_SYS_DDR_TIMING_1 0x3935D322 -#define CONFIG_SYS_DDR_TIMING_2 0x14904CC8 -#define CONFIG_SYS_DDR_MODE 0x00480432 -#define CONFIG_SYS_DDR_INTERVAL 0x030C0100 -#define CONFIG_SYS_DDR_CONFIG_2 0x04400000 -#define CONFIG_SYS_DDR_CONFIG 0xC3008000 -#define CONFIG_SYS_DDR_CLK_CONTROL 0x03800000 +#define CFG_SYS_DDR_CS0_BNDS 0x0000000f +#define CFG_SYS_DDR_CS0_CONFIG 0x80010102 +#define CFG_SYS_DDR_TIMING_0 0x00260802 +#define CFG_SYS_DDR_TIMING_1 0x3935D322 +#define CFG_SYS_DDR_TIMING_2 0x14904CC8 +#define CFG_SYS_DDR_MODE 0x00480432 +#define CFG_SYS_DDR_INTERVAL 0x030C0100 +#define CFG_SYS_DDR_CONFIG_2 0x04400000 +#define CFG_SYS_DDR_CONFIG 0xC3008000 +#define CFG_SYS_DDR_CLK_CONTROL 0x03800000 #define CFG_SYS_SDRAM_SIZE 256 /* in Megs */ /* * Flash on the LocalBus */ -#define CONFIG_SYS_FLASH0 0xFE000000 -#define CONFIG_SYS_FLASH1 0xFC000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 } +#define CFG_SYS_FLASH0 0xFE000000 +#define CFG_SYS_FLASH1 0xFC000000 +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH1, CFG_SYS_FLASH0 } -#define CONFIG_SYS_LBC_FLASH_BASE CONFIG_SYS_FLASH1 /* Localbus flash start */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_LBC_FLASH_BASE /* start of FLASH */ +#define CFG_SYS_LBC_FLASH_BASE CFG_SYS_FLASH1 /* Localbus flash start */ +#define CFG_SYS_FLASH_BASE CFG_SYS_LBC_FLASH_BASE /* start of FLASH */ -#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ -#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ -#define CONFIG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ +#define CFG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */ +#define CFG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ +#define CFG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ +#define CFG_SYS_LBC_MRTPR 0x20000000 /* LB refresh timer presc.*/ -#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM*/ +#define CFG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ +#define CFG_SYS_INIT_RAM_SIZE 0x4000 /* Size used area in RAM*/ -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CFG_SYS_INIT_SP_OFFSET (CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) /* FPGA and NAND */ -#define CONFIG_SYS_FPGA_BASE 0xc0000000 -#define CONFIG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */ +#define CFG_SYS_FPGA_BASE 0xc0000000 +#define CFG_SYS_FPGA_SIZE 0x00100000 /* 1 MB */ -#define CFG_SYS_NAND_BASE (CONFIG_SYS_FPGA_BASE + 0x70) +#define CFG_SYS_NAND_BASE (CFG_SYS_FPGA_BASE + 0x70) /* LIME GDC */ -#define CONFIG_SYS_LIME_BASE 0xc8000000 +#define CFG_SYS_LIME_BASE 0xc8000000 /* * General PCI @@ -137,7 +137,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/somlabs_visionsom_6ull.h b/include/configs/somlabs_visionsom_6ull.h index 008aa50010..de0f48b79a 100644 --- a/include/configs/somlabs_visionsom_6ull.h +++ b/include/configs/somlabs_visionsom_6ull.h @@ -54,8 +54,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index 3c70856fc7..a5987c5e17 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -15,7 +15,7 @@ */ /* FIXME: This should be loaded from device tree... */ -#define CONFIG_SYS_PL310_BASE 0xa0412000 +#define CFG_SYS_PL310_BASE 0xa0412000 /* Linux does not boot if FDT / initrd is loaded to end of RAM */ #define BOOT_ENV \ diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index 806323e375..9294d57ca8 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -14,7 +14,7 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define PHYS_SDRAM_1_SIZE 0x3E000000 -#define CONFIG_SYS_HZ_CLOCK 750000000 /* 750 MHz */ +#define CFG_SYS_HZ_CLOCK 750000000 /* 750 MHz */ /* Environment */ @@ -22,7 +22,7 @@ * For booting Linux, use the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ SZ_256M +#define CFG_SYS_BOOTMAPSZ SZ_256M #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 51f69010b1..afd7d50428 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -7,13 +7,13 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \ diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index 221b7abe1a..c8aad47966 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -10,15 +10,15 @@ #include <linux/sizes.h> /* For booting Linux, use the first 16MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ SZ_16M +#define CFG_SYS_BOOTMAPSZ SZ_16M -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index 55e70ce925..573a6b1795 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -10,15 +10,15 @@ #include <linux/sizes.h> /* For booting Linux, use the first 12MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ SZ_8M + SZ_4M +#define CFG_SYS_BOOTMAPSZ SZ_8M + SZ_4M -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index c7d6d9368a..14e883a358 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -10,15 +10,15 @@ #include <linux/sizes.h> /* For booting Linux, use the first 6MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ SZ_4M + SZ_2M +#define CFG_SYS_BOOTMAPSZ SZ_4M + SZ_2M -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ +#define CFG_SYS_HZ_CLOCK 1000000 /* Timer is clocked at 1MHz */ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) @@ -33,7 +33,7 @@ "ramdisk_addr_r=0xC0438000\0" \ BOOTENV -#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \ +#define CFG_SYS_UBOOT_BASE (CFG_SYS_FLASH_BASE + \ CONFIG_SPL_PAD_TO) /* For splashcreen */ diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index f959fcf26f..67e6a3a19d 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -11,11 +11,11 @@ #include <linux/sizes.h> /* For booting Linux, use the first 16MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ SZ_16M +#define CFG_SYS_BOOTMAPSZ SZ_16M -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_HZ_CLOCK 1000000 +#define CFG_SYS_HZ_CLOCK 1000000 #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index c8688e9ca7..4786eb001b 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -11,11 +11,11 @@ #include <linux/sizes.h> /* For booting Linux, use the first 16MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ SZ_16M +#define CFG_SYS_BOOTMAPSZ SZ_16M -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_HZ_CLOCK 1000000 +#define CFG_SYS_HZ_CLOCK 1000000 #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h index f7fa8c51d8..e667fe6f6a 100644 --- a/include/configs/stm32h750-art-pi.h +++ b/include/configs/stm32h750-art-pi.h @@ -11,11 +11,11 @@ #include <linux/sizes.h> /* For booting Linux, use the first 16MB of memory */ -#define CONFIG_SYS_BOOTMAPSZ (SZ_16M + SZ_8M) +#define CFG_SYS_BOOTMAPSZ (SZ_16M + SZ_8M) -#define CONFIG_SYS_FLASH_BASE 0x90000000 +#define CFG_SYS_FLASH_BASE 0x90000000 -#define CONFIG_SYS_HZ_CLOCK 1000000 +#define CFG_SYS_HZ_CLOCK 1000000 #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) diff --git a/include/configs/stm32mp13_common.h b/include/configs/stm32mp13_common.h index d711149314..c259a61613 100644 --- a/include/configs/stm32mp13_common.h +++ b/include/configs/stm32mp13_common.h @@ -19,7 +19,7 @@ * For booting Linux, use the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ SZ_256M +#define CFG_SYS_BOOTMAPSZ SZ_256M /* NAND support */ diff --git a/include/configs/stm32mp13_st_common.h b/include/configs/stm32mp13_st_common.h index c51022b40d..ad8126f610 100644 --- a/include/configs/stm32mp13_st_common.h +++ b/include/configs/stm32mp13_st_common.h @@ -15,7 +15,7 @@ #include <configs/stm32mp13_common.h> /* uart with on-board st-link */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600, \ 1000000, 2000000, 4000000} diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index f78ce41ed8..c9cfadd9ce 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -19,7 +19,7 @@ * For booting Linux, use the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ SZ_256M +#define CFG_SYS_BOOTMAPSZ SZ_256M /* NAND support */ diff --git a/include/configs/stm32mp15_st_common.h b/include/configs/stm32mp15_st_common.h index 6bdc286cfc..38b5aa7319 100644 --- a/include/configs/stm32mp15_st_common.h +++ b/include/configs/stm32mp15_st_common.h @@ -14,7 +14,7 @@ #include <configs/stm32mp15_common.h> /* uart with on-board st-link */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ +#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 921600, \ 1000000, 2000000 } diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index 234327e017..faff8d6ed6 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -10,7 +10,7 @@ #define CONFIG_HOSTNAME "stmark2" -#define CONFIG_SYS_UART_PORT 0 +#define CFG_SYS_UART_PORT 0 #define LDS_BOARD_TEXT \ board/sysam/stmark2/sbf_dram_init.o (.text*) @@ -34,24 +34,24 @@ "sf write ${loadaddr} 0x00800000 ${filesize}\0" \ "" -#define CONFIG_SYS_SBFHDR_SIZE 0x7 +#define CFG_SYS_SBFHDR_SIZE 0x7 /* Input, PCI, Flexbus, and VCO */ #define CONFIG_PRAM 2048 /* 2048 KB */ -#define CONFIG_SYS_MBAR 0xFC000000 +#define CFG_SYS_MBAR 0xFC000000 /* * Definitions for initial stack pointer and data area (in internal SRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 /* End of used area in internal SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 -#define CONFIG_SYS_INIT_RAM_CTRL 0x221 -#define CONFIG_SYS_INIT_SP_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ +#define CFG_SYS_INIT_RAM_SIZE 0x10000 +#define CFG_SYS_INIT_RAM_CTRL 0x221 +#define CFG_SYS_INIT_SP_OFFSET ((CFG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) - 32) -#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) +#define CFG_SYS_SBFHDR_DATA_OFFSET (CFG_SYS_INIT_RAM_SIZE - 32) /* * Start addresses for the final memory configuration @@ -61,7 +61,7 @@ #define CFG_SYS_SDRAM_BASE 0x40000000 #define CFG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ -#define CONFIG_SYS_DRAM_TEST +#define CFG_SYS_DRAM_TEST #if defined(CONFIG_CF_SBF) #define CONFIG_SERIAL_BOOT @@ -75,7 +75,7 @@ * the maximum mapped by the Linux kernel during initialization ?? */ /* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + \ +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + \ (CFG_SYS_SDRAM_SIZE << 20)) /* Configuration for environment @@ -83,22 +83,22 @@ */ /* Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) -#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) -#define CONFIG_SYS_CACHE_ACR2 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CFG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CFG_SYS_CACHE_ACR2 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ CF_CACR_ICINVA | CF_CACR_EUSP) -#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ +#define CFG_SYS_CACHE_DCACR ((CFG_SYS_CACHE_ICACR | \ CF_CACR_DEC | CF_CACR_DDCM_P | \ CF_CACR_DCINVA) & ~CF_CACR_ICINVA) -#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 12) +#define CACR_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 12) #endif /* __STMARK2_CONFIG_H */ diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index b2dcb6058b..7eadb6d421 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -6,7 +6,7 @@ #ifndef __CONFIG_STV0991_H #define __CONFIG_STV0991_H -#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH +#define CFG_SYS_EXCEPTION_VECTORS_HIGH /* ram memory-related information */ #define PHYS_SDRAM_1 0x00000000 @@ -16,8 +16,8 @@ /* user interface */ /* MISC */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_INIT_RAM_ADDR 0x00190000 /* U-Boot Load Address */ /* Misc configuration */ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index e1a66f53ff..1677aafad0 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -62,9 +62,9 @@ * is known yet. * H6 has SRAM A1 at 0x00020000. */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS +#define CFG_SYS_INIT_RAM_ADDR CONFIG_SUNXI_SRAM_ADDRESS /* FIXME: this may be larger on some SoCs */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* 32 KiB */ #define PHYS_SDRAM_0 CFG_SYS_SDRAM_BASE #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index daa9bbec88..6992689001 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -6,7 +6,7 @@ #define __CONFIG_H /* Timers for fasp(TIMCLK) */ -#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */ +#define CFG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */ /* * SDRAM (for initialize) @@ -28,7 +28,7 @@ */ /* RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#define CFG_SYS_I2C_RTC_ADDR 0x51 /* Serial (pl011) */ #define UART_CLK (62500000) @@ -36,8 +36,8 @@ #define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} /* Support MTD */ -#define CONFIG_SYS_FLASH_BASE (0x08000000) -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CFG_SYS_FLASH_BASE (0x08000000) +#define CFG_SYS_FLASH_BANKS_LIST {CFG_SYS_FLASH_BASE} /* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 1aba986e1e..baaf94e2dd 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -29,8 +29,8 @@ */ /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */ /* Misc CPU related */ @@ -49,8 +49,8 @@ * leaving the correct space for initial global data structure above * that address while providing maximum stack area below. */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NAND flash */ #ifdef CONFIG_CMD_NAND @@ -136,11 +136,11 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63, } -#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CFG_SYS_MASTER_CLOCK 132096000 #define AT91_PLL_LOCK_TIMEOUT 1000000 -#define CONFIG_SYS_AT91_PLLA 0x202A3F01 -#define CONFIG_SYS_MCKR 0x1300 -#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) -#define CONFIG_SYS_AT91_PLLB 0x10193F05 +#define CFG_SYS_AT91_PLLA 0x202A3F01 +#define CFG_SYS_MCKR 0x1300 +#define CFG_SYS_MCKR_CSS (0x02 | CFG_SYS_MCKR) +#define CFG_SYS_AT91_PLLB 0x10193F05 #endif diff --git a/include/configs/tb100.h b/include/configs/tb100.h index cd1309b3b8..1318f5e5ee 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -12,8 +12,8 @@ * Memory configuration */ -#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 -#define CFG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CFG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE #define CFG_SYS_SDRAM_SIZE SZ_128M /* diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 2d8bde1cee..f6544f6226 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -15,10 +15,10 @@ /* Physical Memory Map */ #define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE -#define CONFIG_SYS_BOOTMAPSZ 0x10000000 +#define CFG_SYS_BOOTMAPSZ 0x10000000 /* Framebuffer */ #define CONFIG_IMX_HDMI diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 7e764b0000..66cf7ae584 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -17,8 +17,8 @@ /* Use the Tegra US timer on ARMv7, but the architected timer on ARMv8. */ #ifndef CONFIG_ARM64 -#define CONFIG_SYS_TIMER_RATE 1000000 -#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE +#define CFG_SYS_TIMER_RATE 1000000 +#define CFG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE #endif /* Environment */ @@ -42,11 +42,11 @@ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ +#define CFG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ #ifndef CONFIG_ARM64 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN +#define CFG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE +#define CFG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN /* Defines for SPL */ #endif diff --git a/include/configs/ten64.h b/include/configs/ten64.h index 04772c9e4e..57724719a9 100644 --- a/include/configs/ten64.h +++ b/include/configs/ten64.h @@ -10,7 +10,7 @@ #include "ls1088a_common.h" -#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#define CFG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 #define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd" #define SD_BOOTCOMMAND "run distro_bootcmd" diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 1f60b9b497..7becf1eb7c 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -8,7 +8,7 @@ #define MEM_BASE 0x00500000 -#define CONFIG_SYS_LOWMEM_BASE MEM_BASE +#define CFG_SYS_LOWMEM_BASE MEM_BASE /* Link Definitions */ @@ -22,8 +22,8 @@ /* Generic Interrupt Controller Definitions */ #define GICD_BASE (0x801000000000) #define GICR_BASE (0x801000002000) -#define CONFIG_SYS_SERIAL0 0x87e024000000 -#define CONFIG_SYS_SERIAL1 0x87e025000000 +#define CFG_SYS_SERIAL0 0x87e024000000 +#define CFG_SYS_SERIAL1 0x87e025000000 /* Miscellaneous configurable options */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index e5b23d2a54..03849adb5a 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -74,7 +74,7 @@ /** * Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x4802E000 +#define CFG_SYS_TIMERBASE 0x4802E000 /* NS16550 Configuration */ #define CFG_SYS_NS16550_CLK (48000000) diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 4a7c3d5b44..7b04292d21 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -25,7 +25,7 @@ /** * Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x4802E000 +#define CFG_SYS_TIMERBASE 0x4802E000 /* * NS16550 Configuration diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index 00eb329faa..ed17b42920 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -12,7 +12,7 @@ #define __CONFIG_TI_AM335X_COMMON_H__ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CFG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #include <asm/arch/omap.h> diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h index 65abb187d9..ea45bba409 100644 --- a/include/configs/ti_armv7_keystone2.h +++ b/include/configs/ti_armv7_keystone2.h @@ -14,7 +14,7 @@ /* SoC Configuration */ /* Memory Configuration */ -#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000 +#define CFG_SYS_LPAE_SDRAM_BASE 0x800000000 #define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */ #ifdef CONFIG_SYS_MALLOC_F_LEN @@ -44,7 +44,7 @@ #endif /* SPI Configuration */ -#define CONFIG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) +#define CFG_SYS_SPI_CLK ks_clk_get_rate(KS2_CLK1_6) /* Keystone net */ #define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR @@ -176,9 +176,9 @@ #include <asm/arch/hardware.h> #include <asm/arch/clock.h> #ifndef CONFIG_SOC_K2G -#define CONFIG_SYS_HZ_CLOCK ks_clk_get_rate(KS2_CLK1_6) +#define CFG_SYS_HZ_CLOCK ks_clk_get_rate(KS2_CLK1_6) #else -#define CONFIG_SYS_HZ_CLOCK get_external_clk(sys_clk) +#define CFG_SYS_HZ_CLOCK get_external_clk(sys_clk) #endif #endif /* __CONFIG_KS2_EVM_H */ diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h index d282c3956e..36a05b6896 100644 --- a/include/configs/ti_omap3_common.h +++ b/include/configs/ti_omap3_common.h @@ -27,7 +27,7 @@ /* NS16550 Configuration */ #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ #define CFG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ +#define CFG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ 115200} /* Select serial console configuration */ @@ -46,7 +46,7 @@ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). * This rate is divided by a local divisor. */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CFG_SYS_TIMERBASE (OMAP34XX_GPT2) /* SPL */ diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index ce50e35d8d..9a068e2614 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -12,7 +12,7 @@ #define __CONFIG_TI_OMAP4_COMMON_H #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE 0x48242000 +#define CFG_SYS_PL310_BASE 0x48242000 #endif /* Get CPU defs */ @@ -20,7 +20,7 @@ #include <asm/arch/omap.h> /* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CFG_SYS_TIMERBASE GPT2_BASE #include <configs/ti_armv7_omap.h> diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index c49c177390..37ab2e4467 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -17,7 +17,7 @@ #define __CONFIG_TI_OMAP5_COMMON_H /* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CFG_SYS_TIMERBASE GPT2_BASE #include <linux/stringify.h> diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index a609aa3a2a..0f28690612 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -41,6 +41,6 @@ * Else boot FIT image. */ -#define CONFIG_SYS_FLASH_BASE 0x0C000000 +#define CFG_SYS_FLASH_BASE 0x0C000000 #endif /* __TOTAL_COMPUTE_H */ diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 1378981991..24943c8dcf 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -8,8 +8,8 @@ #define CFG_SYS_SDRAM_BASE 0xa0000000 -#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 +#define CFG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CFG_SYS_INIT_RAM_SIZE 0x8000 /* * Serial Port diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index f8e3a2d017..9c3454add4 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -269,8 +269,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* * All the defines above are for the TQMa6 SoM diff --git a/include/configs/tqma6_wru4.h b/include/configs/tqma6_wru4.h index 999130600c..ce897fcd93 100644 --- a/include/configs/tqma6_wru4.h +++ b/include/configs/tqma6_wru4.h @@ -17,8 +17,8 @@ /* Config on-board RTC */ #define CONFIG_RTC_DS1337 -#define CONFIG_SYS_RTC_BUS_NUM 2 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CFG_SYS_RTC_BUS_NUM 2 +#define CFG_SYS_I2C_RTC_ADDR 0x68 /* Turn off RTC square-wave output to save battery */ #define CONFIG_RTC_DS1337_NOOSC diff --git a/include/configs/trats.h b/include/configs/trats.h index 23dcf20c1f..5bd0ca2a96 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -12,7 +12,7 @@ #include <configs/exynos4-common.h> #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE 0x10502000 +#define CFG_SYS_PL310_BASE 0x10502000 #endif /* TRATS has 4 banks of DRAM */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 9c6433ccfd..cef563696b 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -13,7 +13,7 @@ #include <configs/exynos4-common.h> #ifndef CONFIG_SYS_L2CACHE_OFF -#define CONFIG_SYS_PL310_BASE 0x10502000 +#define CFG_SYS_PL310_BASE 0x10502000 #endif /* TRATS2 has 4 banks of DRAM */ diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 4ca8eafc91..fdb420ed87 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -9,7 +9,7 @@ #define _CONFIG_TURRIS_MOX_H #define CFG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ +#define CFG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \ 9600, 19200, 38400, 57600, 115200, \ 230400, 460800, 500000, 576000, \ 921600, 1000000, 1152000, 1500000, \ diff --git a/include/configs/udoo.h b/include/configs/udoo.h index c1e80b44c8..fac8c1eeb4 100644 --- a/include/configs/udoo.h +++ b/include/configs/udoo.h @@ -50,8 +50,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h index f73092661a..0e0d5b5b3e 100644 --- a/include/configs/udoo_neo.h +++ b/include/configs/udoo_neo.h @@ -58,8 +58,8 @@ /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* PMIC */ #define CONFIG_POWER_PFUZE3000 diff --git a/include/configs/ulcb.h b/include/configs/ulcb.h index a977271c1e..ab199bc726 100644 --- a/include/configs/ulcb.h +++ b/include/configs/ulcb.h @@ -14,7 +14,7 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_BANKS_LIST { 0x08000000 } -#define CONFIG_SYS_WRITE_SWAPPED_DATA +#define CFG_SYS_FLASH_BANKS_LIST { 0x08000000 } +#define CFG_SYS_WRITE_SWAPPED_DATA #endif /* __ULCB_H */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index a57ecffd59..8cd81f1cdd 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -37,7 +37,7 @@ #if !defined(CONFIG_ARM64) /* Time clock 1MHz */ -#define CONFIG_SYS_TIMER_RATE 1000000 +#define CFG_SYS_TIMER_RATE 1000000 #endif #define CFG_SYS_NAND_REGS_BASE 0x68100000 @@ -162,11 +162,11 @@ LINUXBOOT_ENV_SETTINGS \ BOOTENV -#define CONFIG_SYS_BOOTMAPSZ 0x20000000 +#define CFG_SYS_BOOTMAPSZ 0x20000000 /* only for SPL */ /* subtract sizeof(struct legacy_img_hdr) */ -#define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40) +#define CFG_SYS_UBOOT_BASE (0x130000 - 0x40) #endif /* __CONFIG_UNIPHIER_H__ */ diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index d2fd23e1d9..657dbadd33 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -17,8 +17,8 @@ #include <asm/hardware.h> /* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ +#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* * Hardware drivers @@ -28,8 +28,8 @@ #define CFG_SYS_SDRAM_BASE ATMEL_BASE_CS1 #define CFG_SYS_SDRAM_SIZE 0x04000000 -#define CONFIG_SYS_INIT_RAM_SIZE (16 * 1024) -#define CONFIG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 +#define CFG_SYS_INIT_RAM_SIZE (16 * 1024) +#define CFG_SYS_INIT_RAM_ADDR ATMEL_BASE_SRAM1 /* NAND flash */ #ifdef CONFIG_CMD_NAND diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index e944e78603..da68d7a0da 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -61,7 +61,7 @@ #define PHYS_SDRAM_SIZE (gd->ram_size) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif /* __CONFIG_H */ diff --git a/include/configs/vcoreiii.h b/include/configs/vcoreiii.h index d9e5dfacea..b03159805c 100644 --- a/include/configs/vcoreiii.h +++ b/include/configs/vcoreiii.h @@ -10,7 +10,7 @@ /* Onboard devices */ -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 #define CFG_SYS_NS16550_CLK CONFIG_SYS_MIPS_TIMER_FREQ diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index b209d97e5e..18ac6b2b08 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -9,7 +9,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -53,8 +53,8 @@ "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x2 " \ "${blkcnt}; fi\0" -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_2M #if defined(CONFIG_ENV_IS_IN_MMC) /* Environment in eMMC, before config block at the end of 1st "boot sector" */ diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h index 1b9f2ca26f..88839a6e56 100644 --- a/include/configs/verdin-imx8mp.h +++ b/include/configs/verdin-imx8mp.h @@ -9,7 +9,7 @@ #include <asm/arch/imx-regs.h> #include <linux/sizes.h> -#define CONFIG_SYS_UBOOT_BASE \ +#define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) #ifdef CONFIG_SPL_BUILD @@ -65,8 +65,8 @@ "${blkcnt} / 0x200; mmc dev 2 1; mmc write ${loadaddr} 0x0 " \ "${blkcnt}; fi\0" -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K +#define CFG_SYS_INIT_RAM_ADDR 0x40000000 +#define CFG_SYS_INIT_RAM_SIZE SZ_512K /* i.MX 8M Plus supports max. 8GB memory in two albeit concecutive banks */ #define CFG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/vexpress_aemv8.h b/include/configs/vexpress_aemv8.h index 9a46d50c6f..30c1f5025b 100644 --- a/include/configs/vexpress_aemv8.h +++ b/include/configs/vexpress_aemv8.h @@ -254,9 +254,9 @@ BOOTENV #ifdef CONFIG_TARGET_VEXPRESS64_JUNO -#define CONFIG_SYS_FLASH_BASE 0x08000000 +#define CFG_SYS_FLASH_BASE 0x08000000 #else -#define CONFIG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000) +#define CFG_SYS_FLASH_BASE (V2M_PA_BASE + 0x0C000000) #endif #endif /* __VEXPRESS_AEMV8_H */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index de571f63ee..e8b6acf8b8 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -112,16 +112,16 @@ #define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) -#define CONFIG_SYS_TIMER_RATE 1000000 -#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4) +#define CFG_SYS_TIMER_RATE 1000000 +#define CFG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4) /* PL011 Serial Configuration */ #define CONFIG_PL011_CLOCK 24000000 -#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ - (void *)CONFIG_SYS_SERIAL1} +#define CONFIG_PL01x_PORTS {(void *)CFG_SYS_SERIAL0, \ + (void *)CFG_SYS_SERIAL1} -#define CONFIG_SYS_SERIAL0 V2M_UART0 -#define CONFIG_SYS_SERIAL1 V2M_UART1 +#define CFG_SYS_SERIAL0 V2M_UART0 +#define CFG_SYS_SERIAL1 V2M_UART1 /* Miscellaneous configurable options */ #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) @@ -135,7 +135,7 @@ /* additions for new relocation code */ #define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Basic environment settings */ #define BOOT_TARGET_DEVICES(func) \ @@ -164,7 +164,7 @@ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" /* FLASH and environment organization */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 +#define CFG_SYS_FLASH_SIZE 0x04000000 /* Timeout values in ticks */ @@ -177,6 +177,6 @@ */ /* Store environment at top of flash */ -#define CONFIG_SYS_FLASH_BANKS_LIST { V2M_NOR0, V2M_NOR1 } +#define CFG_SYS_FLASH_BANKS_LIST { V2M_NOR0, V2M_NOR1 } #endif /* VEXPRESS_COMMON_H */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index 7b526f725a..14e6b2bac9 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -124,7 +124,7 @@ #define PHYS_SDRAM_SIZE (128 * 1024 * 1024) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE #endif diff --git a/include/configs/vinco.h b/include/configs/vinco.h index df0e269b5d..9f72bdde81 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -21,7 +21,7 @@ #define CONFIG_USART_ID 30 /* Timer */ -#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c +#define CFG_SYS_TIMER_COUNTER 0xfc06863c /* SDRAM */ #define CFG_SYS_SDRAM_BASE 0x20000000 @@ -31,7 +31,7 @@ #ifdef CONFIG_CMD_MMC #define ATMEL_BASE_MMCI 0xfc000000 -#define CONFIG_SYS_MMC_CLK_OD 500000 +#define CFG_SYS_MMC_CLK_OD 500000 /* For generating MMC partitions */ diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h index 7555d97c81..ab5cd5cf63 100644 --- a/include/configs/vining_2000.h +++ b/include/configs/vining_2000.h @@ -24,8 +24,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* MMC Configuration */ #define CFG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index 38b940d35e..43050d61c3 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -9,14 +9,14 @@ /* RAM */ #define CFG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ -#define CONFIG_SYS_UBOOT_START CONFIG_TEXT_BASE +#define CFG_SYS_UBOOT_START CONFIG_TEXT_BASE /* Dummy value */ -#define CONFIG_SYS_UBOOT_BASE 0 +#define CFG_SYS_UBOOT_BASE 0 /* Serial SPL */ #define CFG_SYS_NS16550_CLK 40000000 diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 3acef22132..23027b1d3d 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -90,8 +90,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment organization */ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index cba215c379..56c90aa103 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -85,8 +85,8 @@ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* environment organization */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index 32555c9b6a..065006f912 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -42,7 +42,7 @@ */ /* driver configuration */ -#define CONFIG_SYS_MAX_NAND_CHIPS 1 +#define CFG_SYS_MAX_NAND_CHIPS 1 #define CFG_SYS_NAND_BASE MLC_NAND_BASE /* diff --git a/include/configs/x530.h b/include/configs/x530.h index a0162cab21..dee87cb773 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -13,7 +13,7 @@ /* * NS16550 Configuration */ -#define CFG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CFG_SYS_NS16550_CLK CFG_SYS_TCLK #if !defined(CONFIG_DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index f76c1f8be0..3e17b53dde 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -30,7 +30,7 @@ * CPU Features */ -#define CONFIG_SYS_STACK_SIZE (32 * 1024) +#define CFG_SYS_STACK_SIZE (32 * 1024) /*----------------------------------------------------------------------- * Environment configuration diff --git a/include/configs/xea.h b/include/configs/xea.h index 87f628d4ab..b432ab2dc8 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -16,9 +16,9 @@ /* SPL */ -#define CONFIG_SYS_SPI_KERNEL_OFFS SZ_1M -#define CONFIG_SYS_SPI_ARGS_OFFS SZ_512K -#define CONFIG_SYS_SPI_ARGS_SIZE SZ_32K +#define CFG_SYS_SPI_KERNEL_OFFS SZ_1M +#define CFG_SYS_SPI_ARGS_OFFS SZ_512K +#define CFG_SYS_SPI_ARGS_SIZE SZ_32K /* Memory configuration */ #define PHYS_SDRAM_1 0x40000000 /* Base address */ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 8caf5394ed..ee3130ed32 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -15,7 +15,7 @@ #define GICR_BASE 0xF9080000 /* Serial setup */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } /* GUID for capsule updatable firmware image */ diff --git a/include/configs/xilinx_versal_net.h b/include/configs/xilinx_versal_net.h index 0ccd38b7e6..7d77189693 100644 --- a/include/configs/xilinx_versal_net.h +++ b/include/configs/xilinx_versal_net.h @@ -20,7 +20,7 @@ #define GICR_BASE 0xF9060000 /* Serial setup */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } #if defined(CONFIG_CMD_DFU) diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 60f007a10f..efe241df97 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -15,7 +15,7 @@ #define GICC_BASE 0xF9020000 /* Serial setup */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ { 4800, 9600, 19200, 38400, 57600, 115200 } /* GUIDs for capsule updatable firmware images */ @@ -192,9 +192,9 @@ #endif #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) -# define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000 -# define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000 -# define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000 +# define CFG_SYS_SPI_KERNEL_OFFS 0x80000 +# define CFG_SYS_SPI_ARGS_OFFS 0xa0000 +# define CFG_SYS_SPI_ARGS_SIZE 0xa0000 #endif /* u-boot is like dtb */ diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index b6bc402a7e..3a7b7e03d6 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -10,13 +10,13 @@ /* Serial drivers */ /* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Boot configuration */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CFG_SYS_INIT_RAM_ADDR 0xFFFF0000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Extend size of kernel image for uncompression */ diff --git a/include/configs/xpress.h b/include/configs/xpress.h index 613ed95955..3e604894ad 100644 --- a/include/configs/xpress.h +++ b/include/configs/xpress.h @@ -22,8 +22,8 @@ #define PHYS_SDRAM_SIZE (128 << 20) #define CFG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR -#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE /* Environment is in stored in the eMMC boot partition */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 8739bb2484..9201dac7ab 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -21,12 +21,12 @@ /*===================*/ #if XCHAL_HAVE_PTP_MMU -#define CONFIG_SYS_MEMORY_BASE \ +#define CFG_SYS_MEMORY_BASE \ (XCHAL_VECBASE_RESET_VADDR - XCHAL_VECBASE_RESET_PADDR) -#define CONFIG_SYS_IO_BASE 0xf0000000 +#define CFG_SYS_IO_BASE 0xf0000000 #else -#define CONFIG_SYS_MEMORY_BASE 0x60000000 -#define CONFIG_SYS_IO_BASE 0x90000000 +#define CFG_SYS_MEMORY_BASE 0x60000000 +#define CFG_SYS_IO_BASE 0x90000000 #define CONFIG_MAX_MEM_MAPPED 0x10000000 #endif @@ -100,16 +100,16 @@ */ /* FPGA core clock frequency in Hz (also input to UART) */ -#define CONFIG_SYS_FPGAREG_FREQ IOADDR(0x0D020004) /* CPU clock frequency*/ +#define CFG_SYS_FPGAREG_FREQ IOADDR(0x0D020004) /* CPU clock frequency*/ /* * DIP switch (left=sw1=lsb=bit0, right=sw8=msb=bit7; off=0, on=1): * Bits 0..5 set the lower 6 bits of the default ethernet MAC. * Bit 6 is reserved for future use by Tensilica. - * Bit 7 maps the first 128KB of ROM address space at CONFIG_SYS_ROM_BASE to + * Bit 7 maps the first 128KB of ROM address space at CFG_SYS_ROM_BASE to * the base of flash * (when on/1) or to the base of RAM (when off/0). */ -#define CONFIG_SYS_FPGAREG_DIPSW IOADDR(0x0D02000C) +#define CFG_SYS_FPGAREG_DIPSW IOADDR(0x0D02000C) #define FPGAREG_MAC_SHIFT 0 /* Ethernet MAC bits 0..5 */ #define FPGAREG_MAC_WIDTH 6 #define FPGAREG_MAC_MASK 0x3f @@ -120,8 +120,8 @@ #define FPGAREG_BOOT_FLASH (1<<FPGAREG_BOOT_SHIFT) /* Force hard reset of board by writing a code to this register */ -#define CONFIG_SYS_FPGAREG_RESET IOADDR(0x0D020010) /* Reset board .. */ -#define CONFIG_SYS_FPGAREG_RESET_CODE 0x0000DEAD /* by writing this code */ +#define CFG_SYS_FPGAREG_RESET IOADDR(0x0D020010) /* Reset board .. */ +#define CFG_SYS_FPGAREG_RESET_CODE 0x0000DEAD /* by writing this code */ /*====================*/ /* Serial Driver Info */ @@ -137,25 +137,25 @@ /*======================*/ #define CONFIG_ETHBASE 00:50:C2:13:6f:00 -#define CONFIG_SYS_ETHOC_BASE IOADDR(0x0d030000) -#define CONFIG_SYS_ETHOC_BUFFER_ADDR IOADDR(0x0D800000) +#define CFG_SYS_ETHOC_BASE IOADDR(0x0d030000) +#define CFG_SYS_ETHOC_BUFFER_ADDR IOADDR(0x0D800000) /*=====================*/ /* Flash & Environment */ /*=====================*/ #ifdef CONFIG_XTFPGA_LX60 -# define CONFIG_SYS_FLASH_SIZE 0x0040000 /* 4MB */ -# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */ -# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) +# define CFG_SYS_FLASH_SIZE 0x0040000 /* 4MB */ +# define CFG_SYS_FLASH_PARMSECT_SZ 0x2000 /* param size 8KB */ +# define CFG_SYS_FLASH_BASE IOADDR(0x08000000) #elif defined(CONFIG_XTFPGA_KC705) -# define CONFIG_SYS_FLASH_SIZE 0x8000000 /* 128MB */ -# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ -# define CONFIG_SYS_FLASH_BASE IOADDR(0x00000000) +# define CFG_SYS_FLASH_SIZE 0x8000000 /* 128MB */ +# define CFG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ +# define CFG_SYS_FLASH_BASE IOADDR(0x00000000) #else -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* 16MB */ -# define CONFIG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ -# define CONFIG_SYS_FLASH_BASE IOADDR(0x08000000) +# define CFG_SYS_FLASH_SIZE 0x1000000 /* 16MB */ +# define CFG_SYS_FLASH_PARMSECT_SZ 0x8000 /* param size 32KB */ +# define CFG_SYS_FLASH_BASE IOADDR(0x08000000) #endif /* diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 2d6522af81..b8c142fed3 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -11,12 +11,12 @@ /* Cache options */ #ifndef CONFIG_SYS_L2CACHE_OFF -# define CONFIG_SYS_PL310_BASE 0xf8f02000 +# define CFG_SYS_PL310_BASE 0xf8f02000 #endif #define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 -#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) +#define CFG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR +#define CFG_SYS_TIMER_COUNTER (CFG_SYS_TIMERBASE + 0x4) /* GUIDs for capsule updatable firmware images */ #define XILINX_BOOT_IMAGE_GUID \ @@ -29,7 +29,7 @@ /* Serial drivers */ /* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ +#define CFG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Ethernet driver */ @@ -188,8 +188,8 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CFG_SYS_INIT_RAM_ADDR 0xFFFF0000 +#define CFG_SYS_INIT_RAM_SIZE 0x2000 /* Extend size of kernel image for uncompression */ @@ -200,10 +200,10 @@ /* qspi mode is working fine */ #ifdef CONFIG_ZYNQ_QSPI -#define CONFIG_SYS_SPI_ARGS_OFFS 0x200000 -#define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 -#define CONFIG_SYS_SPI_KERNEL_OFFS (CONFIG_SYS_SPI_ARGS_OFFS + \ - CONFIG_SYS_SPI_ARGS_SIZE) +#define CFG_SYS_SPI_ARGS_OFFS 0x200000 +#define CFG_SYS_SPI_ARGS_SIZE 0x80000 +#define CFG_SYS_SPI_KERNEL_OFFS (CFG_SYS_SPI_ARGS_OFFS + \ + CFG_SYS_SPI_ARGS_SIZE) #endif /* SP location before relocation, must use scratch RAM */ diff --git a/include/configs/zynq_cse.h b/include/configs/zynq_cse.h index cb982c2e74..ac6e8c4ff8 100644 --- a/include/configs/zynq_cse.h +++ b/include/configs/zynq_cse.h @@ -14,9 +14,9 @@ /* Undef unneeded configs */ #undef CONFIG_EXTRA_ENV_SETTINGS -#undef CONFIG_SYS_INIT_RAM_ADDR -#undef CONFIG_SYS_INIT_RAM_SIZE -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFDE000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#undef CFG_SYS_INIT_RAM_ADDR +#undef CFG_SYS_INIT_RAM_SIZE +#define CFG_SYS_INIT_RAM_ADDR 0xFFFDE000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 #endif /* __CONFIG_ZYNQ_CSE_H */ diff --git a/include/fsl-mc/fsl_mc.h b/include/fsl-mc/fsl_mc.h index 07a46a4a1b..c701dc1084 100644 --- a/include/fsl-mc/fsl_mc.h +++ b/include/fsl-mc/fsl_mc.h @@ -66,7 +66,7 @@ int get_mc_boot_status(void); int get_dpl_apply_status(void); int is_lazy_dpl_addr_valid(void); void fdt_fixup_mc_ddr(u64 *base, u64 *size); -#ifdef CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET +#ifdef CFG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET int get_aiop_apply_status(void); #endif u64 mc_get_dram_addr(void); diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index 9f243cd945..de1e70a6d0 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -801,7 +801,7 @@ void init_final_memctl_regs(void); #define IFC_RREGS_64KOFFSET (64*1024) #define IFC_FCM_BASE_ADDR \ - ((struct fsl_ifc_fcm *)CONFIG_SYS_IFC_ADDR) + ((struct fsl_ifc_fcm *)CFG_SYS_IFC_ADDR) #define get_ifc_cspr_ext(i) \ (ifc_in32(&(IFC_FCM_BASE_ADDR)->cspr_cs[i].cspr_ext)) diff --git a/include/i2c.h b/include/i2c.h index c07e60b04b..51390f8fd8 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -633,10 +633,10 @@ void i2c_early_init_f(void); */ #define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */ -#if !defined(CONFIG_SYS_I2C_MAX_HOPS) +#if !defined(CFG_SYS_I2C_MAX_HOPS) /* no muxes used bus = i2c adapters */ #define CONFIG_SYS_I2C_DIRECT_BUS 1 -#define CONFIG_SYS_I2C_MAX_HOPS 0 +#define CFG_SYS_I2C_MAX_HOPS 0 #define CFG_SYS_NUM_I2C_BUSES ll_entry_count(struct i2c_adapter, i2c) #else /* we use i2c muxes */ @@ -644,8 +644,8 @@ void i2c_early_init_f(void); #endif /* define the I2C bus number for RTC and DTT if not already done */ -#if !defined(CONFIG_SYS_RTC_BUS_NUM) -#define CONFIG_SYS_RTC_BUS_NUM 0 +#if !defined(CFG_SYS_RTC_BUS_NUM) +#define CFG_SYS_RTC_BUS_NUM 0 #endif struct i2c_adapter { @@ -705,7 +705,7 @@ struct i2c_next_hop { struct i2c_bus_hose { int adapter; - struct i2c_next_hop next_hop[CONFIG_SYS_I2C_MAX_HOPS]; + struct i2c_next_hop next_hop[CFG_SYS_I2C_MAX_HOPS]; }; #define I2C_NULL_HOP {{-1, ""}, 0, 0} extern struct i2c_bus_hose i2c_bus[]; @@ -931,12 +931,12 @@ unsigned int i2c_get_bus_speed(void); * completely to new multibus support. */ #if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) -# if !defined(CONFIG_SYS_MAX_I2C_BUS) -# define CONFIG_SYS_MAX_I2C_BUS 2 +# if !defined(CFG_SYS_MAX_I2C_BUS) +# define CFG_SYS_MAX_I2C_BUS 2 # endif # define I2C_MULTI_BUS 1 #else -# define CONFIG_SYS_MAX_I2C_BUS 1 +# define CFG_SYS_MAX_I2C_BUS 1 # define I2C_MULTI_BUS 0 #endif diff --git a/include/mpc85xx.h b/include/mpc85xx.h index 053b68a10a..636734dd3c 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -26,38 +26,38 @@ * Define default values for some CCSR macros to make header files cleaner* * * To completely disable CCSR relocation in a board header file, define - * CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE. This will force CONFIG_SYS_CCSRBAR_PHYS - * to a value that is the same as CONFIG_SYS_CCSRBAR. + * CONFIG_SPL_SYS_CCSR_DO_NOT_RELOCATE. This will force CFG_SYS_CCSRBAR_PHYS + * to a value that is the same as CFG_SYS_CCSRBAR. */ -#ifdef CONFIG_SYS_CCSRBAR_PHYS -#error "Do not define CONFIG_SYS_CCSRBAR_PHYS directly. Use \ -CONFIG_SYS_CCSRBAR_PHYS_LOW and/or CONFIG_SYS_CCSRBAR_PHYS_HIGH instead." +#ifdef CFG_SYS_CCSRBAR_PHYS +#error "Do not define CFG_SYS_CCSRBAR_PHYS directly. Use \ +CFG_SYS_CCSRBAR_PHYS_LOW and/or CFG_SYS_CCSRBAR_PHYS_HIGH instead." #endif #if CONFIG_IS_ENABLED(SYS_CCSR_DO_NOT_RELOCATE) -#undef CONFIG_SYS_CCSRBAR_PHYS_HIGH -#undef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#undef CFG_SYS_CCSRBAR_PHYS_HIGH +#undef CFG_SYS_CCSRBAR_PHYS_LOW +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0 #endif -#ifndef CONFIG_SYS_CCSRBAR -#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT +#ifndef CFG_SYS_CCSRBAR +#define CFG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_HIGH +#ifndef CFG_SYS_CCSRBAR_PHYS_HIGH #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0xf +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0xf #else -#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0 +#define CFG_SYS_CCSRBAR_PHYS_HIGH 0 #endif #endif -#ifndef CONFIG_SYS_CCSRBAR_PHYS_LOW -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT +#ifndef CFG_SYS_CCSRBAR_PHYS_LOW +#define CFG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR_DEFAULT #endif -#define CONFIG_SYS_CCSRBAR_PHYS ((CONFIG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ - CONFIG_SYS_CCSRBAR_PHYS_LOW) +#define CFG_SYS_CCSRBAR_PHYS ((CFG_SYS_CCSRBAR_PHYS_HIGH * 1ull) << 32 | \ + CFG_SYS_CCSRBAR_PHYS_LOW) #endif /* __MPC85xx_H__ */ diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 9fe4748032..ea8d17d557 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -16,9 +16,9 @@ * platform register addresses */ -#define GUTS_SVR (CONFIG_SYS_CCSRBAR + 0xE00A4) -#define MCM_ABCR (CONFIG_SYS_CCSRBAR + 0x01000) -#define MCM_DBCR (CONFIG_SYS_CCSRBAR + 0x01008) +#define GUTS_SVR (CFG_SYS_CCSRBAR + 0xE00A4) +#define MCM_ABCR (CFG_SYS_CCSRBAR + 0x01000) +#define MCM_DBCR (CFG_SYS_CCSRBAR + 0x01008) /* * l2cr values. Look in config_<BOARD>.h for the actual setup diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 1321da1910..52cd1c4dbc 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -147,8 +147,8 @@ struct cfi_pri_hdr { u8 minor_version; } __attribute__((packed)); -#ifndef CONFIG_SYS_FLASH_BANKS_LIST -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +#ifndef CFG_SYS_FLASH_BANKS_LIST +#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /* diff --git a/include/mvebu_mmc.h b/include/mvebu_mmc.h index e75c3fa328..0f6f5c23de 100644 --- a/include/mvebu_mmc.h +++ b/include/mvebu_mmc.h @@ -21,7 +21,7 @@ #define MVEBU_MMC_CLOCKRATE_MAX 50000000 #define MVEBU_MMC_BASE_DIV_MAX 0x7ff -#define MVEBU_MMC_BASE_FAST_CLOCK CONFIG_SYS_TCLK +#define MVEBU_MMC_BASE_FAST_CLOCK CFG_SYS_TCLK #define MVEBU_MMC_BASE_FAST_CLK_100 100000000 #define MVEBU_MMC_BASE_FAST_CLK_200 200000000 diff --git a/include/post.h b/include/post.h index ec03556e91..867a66f300 100644 --- a/include/post.h +++ b/include/post.h @@ -142,7 +142,7 @@ extern int memory_post_test(int flags); #define CONFIG_SYS_POST_RTC 0x00000001 #define CONFIG_SYS_POST_WATCHDOG 0x00000002 -#define CONFIG_SYS_POST_MEMORY 0x00000004 +#define CFG_SYS_POST_MEMORY 0x00000004 #define CONFIG_SYS_POST_CPU 0x00000008 #define CONFIG_SYS_POST_I2C 0x00000010 #define CONFIG_SYS_POST_CACHE 0x00000020 @@ -163,7 +163,7 @@ extern int memory_post_test(int flags); #define CONFIG_SYS_POST_CODEC 0x00200000 #define CONFIG_SYS_POST_COPROC 0x00400000 #define CONFIG_SYS_POST_FLASH 0x00800000 -#define CONFIG_SYS_POST_MEM_REGIONS 0x01000000 +#define CFG_SYS_POST_MEM_REGIONS 0x01000000 #endif /* CONFIG_POST */ diff --git a/include/spl.h b/include/spl.h index 3eb27de616..fb8c279d72 100644 --- a/include/spl.h +++ b/include/spl.h @@ -470,7 +470,7 @@ void spl_set_bd(void); * spl_set_header_raw_uboot() - Set up a standard SPL image structure * * This sets up the given spl_image which the standard values obtained from - * config options: CONFIG_SYS_MONITOR_LEN, CONFIG_SYS_UBOOT_START, + * config options: CONFIG_SYS_MONITOR_LEN, CFG_SYS_UBOOT_START, * CONFIG_TEXT_BASE. * * @spl_image: Image description to set up diff --git a/include/system-constants.h b/include/system-constants.h index 07c3505e8f..0d6b71b35a 100644 --- a/include/system-constants.h +++ b/include/system-constants.h @@ -12,10 +12,10 @@ #define SYS_INIT_SP_ADDR CONFIG_CUSTOM_SYS_INIT_SP_ADDR #else #ifdef CONFIG_MIPS -#define SYS_INIT_SP_ADDR (CFG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET) +#define SYS_INIT_SP_ADDR (CFG_SYS_SDRAM_BASE + CFG_SYS_INIT_SP_OFFSET) #else #define SYS_INIT_SP_ADDR \ - (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + (CFG_SYS_INIT_RAM_ADDR + CFG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #endif #endif diff --git a/include/tca642x.h b/include/tca642x.h index bda86c1ed8..c0a3cef5bd 100644 --- a/include/tca642x.h +++ b/include/tca642x.h @@ -41,13 +41,13 @@ enum { #define TCA642X_DIR_IN 1 /* Default to an address that hopefully won't corrupt other i2c devices */ -#ifndef CONFIG_SYS_I2C_TCA642X_ADDR -#define CONFIG_SYS_I2C_TCA642X_ADDR (~0) +#ifndef CFG_SYS_I2C_TCA642X_ADDR +#define CFG_SYS_I2C_TCA642X_ADDR (~0) #endif /* Default to an address that hopefully won't corrupt other i2c devices */ -#ifndef CONFIG_SYS_I2C_TCA642X_BUS_NUM -#define CONFIG_SYS_I2C_TCA642X_BUS_NUM (0) +#ifndef CFG_SYS_I2C_TCA642X_BUS_NUM +#define CFG_SYS_I2C_TCA642X_BUS_NUM (0) #endif struct tca642x_bank_info { diff --git a/include/tsec.h b/include/tsec.h index 72f34851ad..de279b2117 100644 --- a/include/tsec.h +++ b/include/tsec.h @@ -124,8 +124,8 @@ #define RCTRL_PROM 0x00000008 -#ifndef CONFIG_SYS_TBIPA_VALUE -# define CONFIG_SYS_TBIPA_VALUE 0x1f +#ifndef CFG_SYS_TBIPA_VALUE +# define CFG_SYS_TBIPA_VALUE 0x1f #endif #define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN diff --git a/lib/time.c b/lib/time.c index f3aaf472d1..82350260ea 100644 --- a/lib/time.c +++ b/lib/time.c @@ -25,21 +25,21 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SYS_TIMER_RATE +#ifdef CFG_SYS_TIMER_RATE /* Returns tick rate in ticks per second */ ulong notrace get_tbclk(void) { - return CONFIG_SYS_TIMER_RATE; + return CFG_SYS_TIMER_RATE; } #endif -#ifdef CONFIG_SYS_TIMER_COUNTER +#ifdef CFG_SYS_TIMER_COUNTER unsigned long notrace timer_read_counter(void) { #ifdef CONFIG_SYS_TIMER_COUNTS_DOWN - return ~readl(CONFIG_SYS_TIMER_COUNTER); + return ~readl(CFG_SYS_TIMER_COUNTER); #else - return readl(CONFIG_SYS_TIMER_COUNTER); + return readl(CFG_SYS_TIMER_COUNTER); #endif } @@ -47,8 +47,8 @@ ulong timer_get_boot_us(void) { ulong count = timer_read_counter(); -#ifdef CONFIG_SYS_TIMER_RATE - const ulong timer_rate = CONFIG_SYS_TIMER_RATE; +#ifdef CFG_SYS_TIMER_RATE + const ulong timer_rate = CFG_SYS_TIMER_RATE; if (timer_rate == 1000000) return count; diff --git a/post/drivers/memory.c b/post/drivers/memory.c index 8deac75ebb..71dad7b8c0 100644 --- a/post/drivers/memory.c +++ b/post/drivers/memory.c @@ -138,7 +138,7 @@ #include <post.h> #include <watchdog.h> -#if CONFIG_POST & (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_MEM_REGIONS) +#if CONFIG_POST & (CFG_SYS_POST_MEMORY | CFG_SYS_POST_MEM_REGIONS) DECLARE_GLOBAL_DATA_PTR; @@ -535,4 +535,4 @@ int memory_post_test(int flags) return ret; } -#endif /* CONFIG_POST&(CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) */ +#endif /* CONFIG_POST&(CFG_SYS_POST_MEMORY|CFG_SYS_POST_MEM_REGIONS) */ diff --git a/post/tests.c b/post/tests.c index 5c019b643d..fc36e738f7 100644 --- a/post/tests.c +++ b/post/tests.c @@ -109,7 +109,7 @@ struct post_test post_list[] = CONFIG_SYS_POST_RTC }, #endif -#if CONFIG_POST & CONFIG_SYS_POST_MEMORY +#if CONFIG_POST & CFG_SYS_POST_MEMORY { "Memory test", "memory", @@ -118,7 +118,7 @@ struct post_test post_list[] = &memory_post_test, NULL, NULL, - CONFIG_SYS_POST_MEMORY + CFG_SYS_POST_MEMORY }, #endif #if CONFIG_POST & CONFIG_SYS_POST_CPU @@ -286,7 +286,7 @@ struct post_test post_list[] = CONFIG_SYS_POST_FLASH }, #endif -#if CONFIG_POST & CONFIG_SYS_POST_MEM_REGIONS +#if CONFIG_POST & CFG_SYS_POST_MEM_REGIONS { "Memory regions test", "mem_regions", @@ -295,7 +295,7 @@ struct post_test post_list[] = &memory_regions_post_test, NULL, NULL, - CONFIG_SYS_POST_MEM_REGIONS + CFG_SYS_POST_MEM_REGIONS }, #endif }; diff --git a/tools/envcrc.c b/tools/envcrc.c index bce7790247..a021c785ae 100644 --- a/tools/envcrc.c +++ b/tools/envcrc.c @@ -23,13 +23,13 @@ #if defined(CONFIG_ENV_IS_IN_FLASH) # ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +# define CONFIG_ENV_ADDR (CFG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) # endif # ifndef CONFIG_ENV_OFFSET -# define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) +# define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CFG_SYS_FLASH_BASE) # endif # if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND) -# define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND) +# define CONFIG_ENV_ADDR_REDUND (CFG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND) # endif # ifndef CONFIG_ENV_SIZE # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE |