diff options
| -rw-r--r-- | nand_spl/nand_boot.c | 95 |
1 files changed, 56 insertions, 39 deletions
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index a136fb70745..840a5965967 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -24,27 +24,28 @@ #define CFG_NAND_READ_DELAY \ { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } +static int nand_ecc_pos[] = CFG_NAND_ECCPOS; + extern void board_nand_init(struct nand_chip *nand); -extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd); -extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte); -extern u_char ndfc_read_byte(struct mtd_info *mtdinfo); -extern int ndfc_dev_ready(struct mtd_info *mtdinfo); -extern int jump_to_ram(ulong delta); -extern int jump_to_uboot(ulong addr); -static int nand_is_bad_block(struct mtd_info *mtd, int block) +static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) { struct nand_chip *this = mtd->priv; - int page_addr = block * CFG_NAND_PAGE_COUNT; + int page_addr = page + block * CFG_NAND_PAGE_COUNT; + + if (this->dev_ready) + this->dev_ready(mtd); + else + CFG_NAND_READ_DELAY; /* Begin command latch cycle */ this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READOOB); + this->write_byte(mtd, cmd); /* Set ALE and clear CLE to start address cycle */ this->hwcontrol(mtd, NAND_CTL_CLRCLE); this->hwcontrol(mtd, NAND_CTL_SETALE); /* Column address */ - this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ + this->write_byte(mtd, offs); /* A[7:0] */ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ #ifdef CFG_NAND_4_ADDR_CYCLE @@ -62,6 +63,15 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) else CFG_NAND_READ_DELAY; + return 0; +} + +static int nand_is_bad_block(struct mtd_info *mtd, int block) +{ + struct nand_chip *this = mtd->priv; + + nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); + /* * Read on byte */ @@ -74,39 +84,46 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) { struct nand_chip *this = mtd->priv; - int page_addr = page + block * CFG_NAND_PAGE_COUNT; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; int i; + int eccsize = CFG_NAND_ECCSIZE; + int eccbytes = CFG_NAND_ECCBYTES; + int eccsteps = CFG_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READ0); - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - this->hwcontrol(mtd, NAND_CTL_SETALE); - /* Column address */ - this->write_byte(mtd, 0); /* A[7:0] */ - this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ - this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ -#ifdef CFG_NAND_4_ADDR_CYCLE - /* One more address cycle for devices > 32MiB */ - this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */ -#endif - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + nand_command(mtd, block, page, 0, NAND_CMD_READ0); - /* - * Wait a while for the data to be ready + /* No malloc available for now, just use some temporary locations + * in SDRAM */ - if (this->dev_ready) - this->dev_ready(mtd); - else - CFG_NAND_READ_DELAY; + ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->enable_hwecc(mtd, NAND_ECC_READ); + this->read_buf(mtd, p, eccsize); + this->calculate_ecc(mtd, p, &ecc_calc[i]); + } + this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE); - /* - * Read page into buffer - */ - for (i=0; i<CFG_NAND_PAGE_SIZE; i++) - *dst++ = this->read_byte(mtd); + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CFG_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + eccsteps = CFG_NAND_ECCSTEPS; + p = dst; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + /* No chance to do something with the possible error message + * from correct_data(). We just hope that all possible errors + * are corrected by this routine. + */ + stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]); + } return 0; } |