diff options
89 files changed, 5355 insertions, 704 deletions
@@ -236,6 +236,10 @@ E: mark.jonas@freescale.com D: Support for Freescale Total5200 platform W: http://www.mobilegt.com/ +N: Mark Jonas +E: mark.jonas@de.bosch.com +D: Support for MPR2 board + N: Sam Song E: samsongshu@yahoo.com.cn D: Port to the RPXlite_DW board diff --git a/MAINTAINERS b/MAINTAINERS index e31ea06afb..31c0311312 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -322,6 +322,7 @@ Stefan Roese <sr@denx.de> bunbinga PPC405EP canyonlands PPC460EX ebony PPC440GP + glacier PPC460GT haleakala PPC405EXr katmai PPC440SPe kilauea PPC405EX @@ -694,15 +695,25 @@ Haavard Skinnemoen <hskinnemoen@atmel.com> # Board CPU # ######################################################################### -Nobuhiro Iwmaatsu <iwamatsu@nigauri.org> +Nobuhiro Iwamatsu <iwamatsu@nigauri.org> MS7750SE SH7750 MS7722SE SH7722 + R7780MP SH7780 + R2DPlus SH7751R + +Mark Jonas <mark.jonas@de.bosch.com> + + mpr2 SH7720 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> MS7720SE SH7720 +Yusuke Goda <goda.yusuke@renesas.com> + + MIGO-R SH7722 + ######################################################################### # Blackfin Systems: # # # @@ -185,6 +185,7 @@ LIST_4xx=" \ ERIC \ EXBITGEN \ G2000 \ + glacier \ haleakala \ haleakala_nand \ hcu4 \ @@ -703,9 +704,13 @@ LIST_blackfin=" \ LIST_sh4=" \ ms7750se \ ms7722se \ + Migo-R \ + r7780mp \ + r2dplus \ " LIST_sh3=" \ + mpr2 \ ms7720se \ " @@ -1172,8 +1172,13 @@ bubinga_config: unconfig CANBT_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd -canyonlands_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx canyonlands amcc +# Canyonlands & Glacier use different U-Boot images +canyonlands_config \ +glacier_config: unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ + tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h + @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc canyonlands_nand_config: unconfig @mkdir -p $(obj)include $(obj)board/amcc/canyonlands @@ -2849,6 +2854,11 @@ atngw100_config : unconfig ######################################################################### ## sh3 (Renesas SuperH) ######################################################################### +mpr2_config: unconfig + @ >include/config.h + @echo "#define CONFIG_MPR2 1" >> include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh3 mpr2 + ms7720se_config: unconfig @echo "#define CONFIG_MS7720SE 1" > include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se @@ -2864,6 +2874,21 @@ ms7722se_config : unconfig @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se +MigoR_config : unconfig + @ >include/config.h + @echo "#define CONFIG_MIGO_R 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 MigoR + +r7780mp_config: unconfig + @ >include/config.h + @echo "#define CONFIG_R7780MP 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r7780mp + +r2dplus_config : unconfig + @ >include/config.h + @echo "#define CONFIG_R2DPLUS 1" >> include/config.h + @./mkconfig -a $(@:_config=) sh sh4 r2dplus + ######################################################################### ######################################################################### ######################################################################### @@ -1929,6 +1929,27 @@ Configuration Settings: Scratch address used by the alternate memory test You only need to set this if address zero isn't writeable +- CFG_MEM_TOP_HIDE (PPC only): + If CFG_MEM_TOP_HIDE is defined in the board config header, + this specified memory area will get subtracted from the top + (end) of ram and won't get "touched" at all by U-Boot. By + fixing up gd->ram_size the Linux kernel should gets passed + the now "corrected" memory size and won't touch it either. + This should work for arch/ppc and arch/powerpc. Only Linux + board ports in arch/powerpc with bootwrapper support that + recalculate the memory size from the SDRAM controller setup + will have to get fixed in Linux additionally. + + This option can be used as a workaround for the 440EPx/GRx + CHIP 11 errata where the last 256 bytes in SDRAM shouldn't + be touched. + + WARNING: Please make sure that this value is a multiple of + the Linux page size (normally 4k). If this is not the case, + then the end address of the Linux memory will be located at a + non page size aligned address and this could cause major + problems. + - CFG_TFTP_LOADADDR: Default load address for network file downloads diff --git a/board/MigoR/Makefile b/board/MigoR/Makefile new file mode 100644 index 0000000000..5a9d651afb --- /dev/null +++ b/board/MigoR/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# board/MigoR/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := migo_r.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/MigoR/config.mk b/board/MigoR/config.mk new file mode 100644 index 0000000000..c68cb723df --- /dev/null +++ b/board/MigoR/config.mk @@ -0,0 +1,32 @@ +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# board/MigoR/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 + diff --git a/board/MigoR/lowlevel_init.S b/board/MigoR/lowlevel_init.S new file mode 100644 index 0000000000..7fd771d693 --- /dev/null +++ b/board/MigoR/lowlevel_init.S @@ -0,0 +1,269 @@ +/* + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2007 + * Kenati Technologies, Inc. + * + * board/MigoR/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 ! Address of Cache Control Register + mov.l CCR_D, r0 ! Instruction Cache Invalidate + mov.l r0, @r1 + + mov.l MMUCR_A, r1 ! Address of MMU Control Register + mov.l MMUCR_D, r0 ! TI == TLB Invalidate bit + mov.l r0, @r1 + + mov.l MSTPCR0_A, r1 ! Address of Power Control Register 0 + mov.l MSTPCR0_D, r0 ! + mov.l r0, @r1 + + mov.l MSTPCR2_A, r1 ! Address of Power Control Register 2 + mov.l MSTPCR2_D, r0 ! + mov.l r0, @r1 + + mov.l PFC_PULCR_A, r1 + mov.w PFC_PULCR_D, r0 + mov.w r0,@r1 + + mov.l PFC_DRVCR_A, r1 + mov.w PFC_DRVCR_D, r0 + mov.w r0, @r1 + + mov.l SBSCR_A, r1 ! + mov.w SBSCR_D, r0 ! + mov.w r0, @r1 + + mov.l PSCR_A, r1 ! + mov.w PSCR_D, r0 ! + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) + mov.w RWTCSR_D_1, r0 ! 0xA507 -> timer_STOP/WDT_CLK=max + mov.w r0, @r1 + + mov.l RWTCNT_A, r1 ! 0xA4520000 (Watchdog Count Register) + mov.w RWTCNT_D, r0 ! 0x5A00 -> Clear + mov.w r0, @r1 + + mov.l RWTCSR_A, r1 ! 0xA4520004 (Watchdog Control / Status Register) + mov.w RWTCSR_D_2, r0 ! 0xA504 -> timer_STOP/CLK=500ms + mov.w r0, @r1 + + mov.l DLLFRQ_A, r1 ! 20080115 + mov.l DLLFRQ_D, r0 ! 20080115 + mov.l r0, @r1 + + mov.l FRQCR_A, r1 ! 0xA4150000 Frequency control register + mov.l FRQCR_D, r0 ! 20080115 + mov.l r0, @r1 + + mov.l CCR_A, r1 ! Address of Cache Control Register + mov.l CCR_D_2, r0 ! ?? + mov.l r0, @r1 + +bsc_init: + + mov.l CMNCR_A, r1 ! CMNCR address -> R1 + mov.l CMNCR_D, r0 ! CMNCR data -> R0 + mov.l r0, @r1 ! CMNCR set + + mov.l CS0BCR_A, r1 ! CS0BCR address -> R1 + mov.l CS0BCR_D, r0 ! CS0BCR data -> R0 + mov.l r0, @r1 ! CS0BCR set + + mov.l CS4BCR_A, r1 ! CS4BCR address -> R1 + mov.l CS4BCR_D, r0 ! CS4BCR data -> R0 + mov.l r0, @r1 ! CS4BCR set + + mov.l CS5ABCR_A, r1 ! CS5ABCR address -> R1 + mov.l CS5ABCR_D, r0 ! CS5ABCR data -> R0 + mov.l r0, @r1 ! CS5ABCR set + + mov.l CS5BBCR_A, r1 ! CS5BBCR address -> R1 + mov.l CS5BBCR_D, r0 ! CS5BBCR data -> R0 + mov.l r0, @r1 ! CS5BBCR set + + mov.l CS6ABCR_A, r1 ! CS6ABCR address -> R1 + mov.l CS6ABCR_D, r0 ! CS6ABCR data -> R0 + mov.l r0, @r1 ! CS6ABCR set + + mov.l CS0WCR_A, r1 ! CS0WCR address -> R1 + mov.l CS0WCR_D, r0 ! CS0WCR data -> R0 + mov.l r0, @r1 ! CS0WCR set + + mov.l CS4WCR_A, r1 ! CS4WCR address -> R1 + mov.l CS4WCR_D, r0 ! CS4WCR data -> R0 + mov.l r0, @r1 ! CS4WCR set + + mov.l CS5AWCR_A, r1 ! CS5AWCR address -> R1 + mov.l CS5AWCR_D, r0 ! CS5AWCR data -> R0 + mov.l r0, @r1 ! CS5AWCR set + + mov.l CS5BWCR_A, r1 ! CS5BWCR address -> R1 + mov.l CS5BWCR_D, r0 ! CS5BWCR data -> R0 + mov.l r0, @r1 ! CS5BWCR set + + mov.l CS6AWCR_A, r1 ! CS6AWCR address -> R1 + mov.l CS6AWCR_D, r0 ! CS6AWCR data -> R0 + mov.l r0, @r1 ! CS6AWCR set + + ! SDRAM initialization + mov.l SDCR_A, r1 ! SB_SDCR address -> R1 + mov.l SDCR_D, r0 ! SB_SDCR data -> R0 + mov.l r0, @r1 ! SB_SDCR set + + mov.l SDWCR_A, r1 ! SB_SDWCR address -> R1 + mov.l SDWCR_D, r0 ! SB_SDWCR data -> R0 + mov.l r0, @r1 ! SB_SDWCR set + + mov.l SDPCR_A, r1 ! SB_SDPCR address -> R1 + mov.l SDPCR_D, r0 ! SB_SDPCR data -> R0 + mov.l r0, @r1 ! SB_SDPCR set + + mov.l RTCOR_A, r1 ! SB_RTCOR address -> R1 + mov.l RTCOR_D, r0 ! SB_RTCOR data -> R0 + mov.l r0, @r1 ! SB_RTCOR set + + mov.l RTCNT_A, r1 ! SB_RTCNT address -> R1 + mov.l RTCNT_D, r0 ! SB_RTCNT data -> R0 + mov.l r0, @r1 + + mov.l RTCSR_A, r1 ! SB_RTCSR address -> R1 + mov.l RTCSR_D, r0 ! SB_RTCSR data -> R0 + mov.l r0, @r1 ! SB_RTCSR set + + mov.l RFCR_A, r1 ! SB_RFCR address -> R1 + mov.l RFCR_D, r0 ! SB_RFCR data -> R0 + mov.l r0, @r1 + + mov.l SDMR3_A, r1 ! SDMR3 address -> R1 + mov #0x00, r0 ! SDMR3 data -> R0 + mov.b r0, @r1 ! SDMR3 set + + ! BL bit off (init = ON) (?!?) + + stc sr, r0 ! BL bit off(init=ON) + mov.l SR_MASK_D, r1 + and r1, r0 + ldc r0, sr + + rts + mov #0, r0 + + + + .align 4 + +CCR_A: .long CCR +MMUCR_A: .long MMUCR +MSTPCR0_A: .long MSTPCR0 +MSTPCR2_A: .long MSTPCR2 +PFC_PULCR_A: .long PULCR +PFC_DRVCR_A: .long DRVCR +SBSCR_A: .long SBSCR +PSCR_A: .long PSCR +RWTCSR_A: .long RWTCSR +RWTCNT_A: .long RWTCNT +FRQCR_A: .long FRQCR +PLLCR_A: .long PLLCR +DLLFRQ_A: .long DLLFRQ + +CCR_D: .long 0x00000800 +CCR_D_2: .long 0x00000103 +MMUCR_D: .long 0x00000004 +MSTPCR0_D: .long 0x00001001 +MSTPCR2_D: .long 0xffffffff +PFC_PULCR_D: .long 0x6000 +PFC_DRVCR_D: .long 0x0464 +FRQCR_D: .long 0x07033639 +PLLCR_D: .long 0x00005000 +DLLFRQ_D: .long 0x000004F6 ! 20080115 + +CMNCR_A: .long CMNCR +CMNCR_D: .long 0x0000001B ! 20080115 +CS0BCR_A: .long CS0BCR ! Flash bank 1 +CS0BCR_D: .long 0x24920400 +CS4BCR_A: .long CS4BCR ! +CS4BCR_D: .long 0x10003400 ! 20080115 +CS5ABCR_A: .long CS5ABCR ! +CS5ABCR_D: .long 0x24920400 +CS5BBCR_A: .long CS5BBCR ! +CS5BBCR_D: .long 0x24920400 +CS6ABCR_A: .long CS6ABCR ! +CS6ABCR_D: .long 0x24920400 + +CS0WCR_A: .long CS0WCR +CS0WCR_D: .long 0x00000380 +CS4WCR_A: .long CS4WCR +CS4WCR_D: .long 0x00100A81 ! 20080115 +CS5AWCR_A: .long CS5AWCR +CS5AWCR_D: .long 0x00000300 +CS5BWCR_A: .long CS5BWCR +CS5BWCR_D: .long 0x00000300 +CS6AWCR_A: .long CS6AWCR +CS6AWCR_D: .long 0x00000300 + +SDCR_A: .long SBSC_SDCR +SDCR_D: .long 0x80160809 ! 20080115 +SDWCR_A: .long SBSC_SDWCR +SDWCR_D: .long 0x0014450C ! 20080115 +SDPCR_A: .long SBSC_SDPCR +SDPCR_D: .long 0x00000087 +RTCOR_A: .long SBSC_RTCOR +RTCNT_A: .long SBSC_RTCNT +RTCNT_D: .long 0xA55A0012 +RTCOR_D: .long 0xA55A001C ! 20080115 +RTCSR_A: .long SBSC_RTCSR +RFCR_A: .long SBSC_RFCR +RFCR_D: .long 0xA55A0221 +RTCSR_D: .long 0xA55A009a ! 20080115 +SDMR3_A: .long 0xFE581180 ! 20080115 + +SR_MASK_D: .long 0xEFFFFF0F + + .align 2 + +SBSCR_D: .word 0x0044 +PSCR_D: .word 0x0000 +RWTCSR_D_1: .word 0xA507 +RWTCSR_D_2: .word 0xA504 ! 20080115 +RWTCNT_D: .word 0x5A00 + diff --git a/board/MigoR/migo_r.c b/board/MigoR/migo_r.c new file mode 100644 index 0000000000..53f4bb229f --- /dev/null +++ b/board/MigoR/migo_r.c @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2007 + * Kenati Technologies, Inc. + * + * board/MigoR/migo_r.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: Renesas MigoR\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state (unsigned short value) +{ +} + diff --git a/board/MigoR/u-boot.lds b/board/MigoR/u-boot.lds new file mode 100644 index 0000000000..1877b812fe --- /dev/null +++ b/board/MigoR/u-boot.lds @@ -0,0 +1,106 @@ +/* + * Copyrigth (c) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x8C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} + diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 36779f576f..9986e9a9c6 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -32,13 +32,20 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ DECLARE_GLOBAL_DATA_PTR; +#define CFG_BCSR3_PCIE 0x10 + +#define BOARD_CANYONLANDS_PCIE 1 +#define BOARD_CANYONLANDS_SATA 2 +#define BOARD_GLACIER 3 + int board_early_init_f(void) { u32 sdr0_cust0; + u32 pvr = get_pvr(); - /*------------------------------------------------------------------+ + /* * Setup the interrupt controller polarities, triggers, etc. - *------------------------------------------------------------------*/ + */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ @@ -105,27 +112,69 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B); - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) { + /* + * Configure USB-STP pins as alternate and not GPIO + * It seems to be neccessary to configure the STP pins as GPIO + * input at powerup (perhaps while USB reset is asserted). So + * we configure those pins to their "real" function now. + */ + gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + } return 0; } -int checkboard (void) +static void canyonlands_sata_init(int board_type) +{ + u32 reg; + + if (board_type == BOARD_CANYONLANDS_SATA) { + /* Put SATA in reset */ + SDR_WRITE(SDR0_SRST1, 0x00020001); + + /* Set the phy for SATA, not PCI-E port 0 */ + reg = SDR_READ(PESDR0_PHY_CTL_RST); + SDR_WRITE(PESDR0_PHY_CTL_RST, (reg & 0xeffffffc) | 0x00000001); + reg = SDR_READ(PESDR0_L0CLK); + SDR_WRITE(PESDR0_L0CLK, (reg & 0xfffffff8) | 0x00000007); + SDR_WRITE(PESDR0_L0CDRCTL, 0x00003111); + SDR_WRITE(PESDR0_L0DRV, 0x00000104); + + /* Bring SATA out of reset */ + SDR_WRITE(SDR0_SRST1, 0x00000000); + } +} + +int checkboard(void) { char *s = getenv("serial#"); u32 pvr = get_pvr(); - if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) + if ((pvr == PVR_460GT_RA) || (pvr == PVR_460GT_SE_RA)) { printf("Board: Glacier - AMCC PPC460GT Evaluation Board"); - else + gd->board_type = BOARD_GLACIER; + } else { printf("Board: Canyonlands - AMCC PPC460EX Evaluation Board"); + if (in_8((void *)(CFG_BCSR_BASE + 3)) & CFG_BCSR3_PCIE) + gd->board_type = BOARD_CANYONLANDS_PCIE; + else + gd->board_type = BOARD_CANYONLANDS_SATA; + } + + switch (gd->board_type) { + case BOARD_CANYONLANDS_PCIE: + case BOARD_GLACIER: + puts(", 2*PCIe"); + break; + + case BOARD_CANYONLANDS_SATA: + puts(", 1*PCIe/1*SATA"); + break; + } + + printf(", Rev. %X", in_8((void *)(CFG_BCSR_BASE + 0))); if (s != NULL) { puts(", serial# "); @@ -133,6 +182,8 @@ int checkboard (void) } putc('\n'); + canyonlands_sata_init(gd->board_type); + return (0); } @@ -198,37 +249,36 @@ int testdram(void) } #endif -/************************************************************************* +/* * pci_target_init * * The bootstrap configuration provides default settings for the pci * inbound map (PIM). But the bootstrap config choices are limited and * may not be sufficient for a given board. - * - ************************************************************************/ + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - /*-------------------------------------------------------------------+ + /* * Disable everything - *-------------------------------------------------------------------*/ + */ out_le32((void *)PCIX0_PIM0SA, 0); /* disable */ out_le32((void *)PCIX0_PIM1SA, 0); /* disable */ out_le32((void *)PCIX0_PIM2SA, 0); /* disable */ out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */ - /*-------------------------------------------------------------------+ + /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ + */ out_le32((void *)PCIX0_PIM0LAL, CFG_SDRAM_BASE); out_le32((void *)PCIX0_PIM0LAH, 0); out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); out_le32((void *)PCIX0_BAR0, 0); - /*-------------------------------------------------------------------+ + /* * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ + */ out_le16((void *)PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID); out_le16((void *)PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID); @@ -265,13 +315,24 @@ void pcie_setup_hoses(int busno) int ret = 0; char *env; unsigned int delay; + int start; /* * assume we're called after the PCIX hose is initialized, which takes * bus ID 0 and therefore start numbering PCIe's from 1. */ bus = busno; - for (i = 0; i <= 1; i++) { + + /* + * Canyonlands with SATA enabled has only one PCIe slot + * (2nd one). + */ + if (gd->board_type == BOARD_CANYONLANDS_SATA) + start = 1; + else + start = 0; + + for (i = start; i <= 1; i++) { if (is_end_point(i)) ret = ppc4xx_init_pcie_endport(i); @@ -369,6 +430,7 @@ int misc_init_r(void) { u32 sdr0_srst1 = 0; u32 eth_cfg; + u32 pvr = get_pvr(); /* * Set EMAC mode/configuration (GMII, SGMII, RGMII...). @@ -382,7 +444,10 @@ int misc_init_r(void) /* Set the for 2 RGMII mode */ /* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */ eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL; - eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) + eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL; + else + eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL; mtsdr(SDR0_ETH_CFG, eth_cfg); /* @@ -407,7 +472,7 @@ void ft_board_setup(void *blob, bd_t *bd) /* Fixup NOR mapping */ val[0] = 0; /* chip select number */ val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; + val[2] = CFG_FLASH_BASE_PHYS_L; /* we fixed up this address */ val[3] = gd->bd->bi_flashsize; rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", val, sizeof(val), 1); diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds index 7496f485ea..3df6ad4f4d 100644 --- a/board/amcc/canyonlands/u-boot.lds +++ b/board/amcc/canyonlands/u-boot.lds @@ -139,8 +139,6 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); - _end = . ; PROVIDE (end = .); } diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index ceb128c148..3dbb2e135c 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -67,12 +67,12 @@ int board_early_init_f(void) out_be32((void*)GPIO1_OR, 0x00000000); out_be32((void*)GPIO1_TCR, 0xc2000000 | CFG_GPIO1_IORSTN | + CFG_GPIO1_IORST2N | CFG_GPIO1_LEDUSR1 | CFG_GPIO1_LEDUSR2 | CFG_GPIO1_LEDPOST | CFG_GPIO1_LEDDU); out_be32((void*)GPIO1_ODR, CFG_GPIO1_LEDDU); - out_be32((void*)GPIO1_OSRL, 0x5c280000); out_be32((void*)GPIO1_OSRH, 0x00000000); out_be32((void*)GPIO1_TSRL, 0x0c000000); @@ -243,7 +243,8 @@ int misc_init_r(void) * release IO-RST# * We have to wait at least 560ms until we may call usbhub_init */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | CFG_GPIO1_IORSTN); + out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | + CFG_GPIO1_IORSTN | CFG_GPIO1_IORST2N); /* * flash USR1/2 LEDs (600ms) diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h index 5c362e4818..83fdac7c63 100644 --- a/board/esd/du440/du440.h +++ b/board/esd/du440/du440.h @@ -24,6 +24,7 @@ #define CFG_GPIO1_DCF77 (0x80000000 >> (42-32)) /* GPIO1_42 */ #define CFG_GPIO1_IORSTN (0x80000000 >> (55-32)) /* GPIO1_55 */ +#define CFG_GPIO1_IORST2N (0x80000000 >> (47-32)) /* GPIO1_47 */ #define CFG_GPIO1_HWVER_MASK 0x000000f0 /* GPIO1_56-59 */ #define CFG_GPIO1_HWVER_SHIFT 4 diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 350af48638..90d9309555 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Matthias Fuchs, esd Gmbh, matthias.fuchs@esd-electronics.com. * * See file CREDITS for list of people who contributed to this @@ -21,7 +21,6 @@ * MA 02111-1307 USA * */ - #include <common.h> #include <command.h> #include <asm/io.h> @@ -31,7 +30,8 @@ #include "pmc440.h" int is_monarch(void); -int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); +int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt); int eeprom_write_enable(unsigned dev_addr, int state); DECLARE_GLOBAL_DATA_PTR; @@ -64,7 +64,6 @@ int fpga_interrupt(u32 arg) return rc; } - int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -100,7 +99,6 @@ U_BOOT_CMD( NULL ); - void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) { u32 ctrl; @@ -117,7 +115,6 @@ void dump_fifo(pmc440_fpga_t *fpga, int f, int *n) } } - int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -200,7 +197,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) got_fifoirq = 0; /* unmask global fifo irq */ FPGA_OUT32(&fpga->hostctrl, - HOSTCTRL_FIFOIE_GATE | HOSTCTRL_FIFOIE_FLAG); + HOSTCTRL_FIFOIE_GATE | + HOSTCTRL_FIFOIE_FLAG); } } @@ -237,7 +235,8 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) for (i=0; i<n; i++) FPGA_OUT32(&fpga->fifo[f].data, data); } else { - printf("writing %d x %08x to fifo port at address %08x\n", + printf("writing %d x %08x to fifo port at " + "address %08x\n", n, data, f); for (i=0; i<n; i++) out32(f, data); @@ -263,10 +262,10 @@ U_BOOT_CMD( " - without arguments: print all fifo's status\n" " - with 'wait' argument: interrupt driven read from all fifos\n" " - with 'read' argument: read current contents from all fifos\n" - " - with 'write' argument: write 'data' 'cnt' times to 'fifo' or 'address'\n" + " - with 'write' argument: write 'data' 'cnt' times to " + "'fifo' or 'address'\n" ); - int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong sdsdp[5]; @@ -301,10 +300,12 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] sdsdp[2]=0x40082350; sdsdp[3]=0x0d050000; } else if (!strcmp(argv[1], "test")) { - /* TODO: this will replace the 667 MHz config above. + /* + * TODO: this will replace the 667 MHz config above. * But it needs some more testing on a real 667 MHz CPU. */ - printf("Bootstrapping for test (667MHz PLB=133PLB PLB/PCI=3)\n"); + printf("Bootstrapping for test" + " (667MHz PLB=133PLB PLB/PCI=3)\n"); sdsdp[0]=0x8778a256; sdsdp[1]=0x095fa030; sdsdp[2]=0x40082350; @@ -347,7 +348,6 @@ U_BOOT_CMD( "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" ); - #if defined(CONFIG_PRAM) #include <environment.h> extern env_t *env_ptr; @@ -394,7 +394,6 @@ U_BOOT_CMD( ); #endif /* CONFIG_PRAM */ - int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { if (argc > 1) { @@ -423,7 +422,6 @@ U_BOOT_CMD( NULL ); - int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { pmc440_fpga_t *fpga = (pmc440_fpga_t *)FPGA_BA; @@ -444,7 +442,8 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* deassert */ printf("PMC-RESETOUT# deasserted\n"); FPGA_OUT32(&fpga->hostctrl, - HOSTCTRL_PMCRSTOUT_GATE | HOSTCTRL_PMCRSTOUT_FLAG); + HOSTCTRL_PMCRSTOUT_GATE | + HOSTCTRL_PMCRSTOUT_FLAG); } } else { printf("PMC-RESETOUT# is %s\n", @@ -460,7 +459,6 @@ U_BOOT_CMD( NULL ); - int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { if (is_monarch()) { @@ -481,7 +479,9 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) in_be32((void*)GPIO1_TCR) & ~GPIO1_INTA_FAKE); } } else { - printf("inta# is %s\n", in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? "active" : "inactive"); + printf("inta# is %s\n", + in_be32((void*)GPIO1_TCR) & GPIO1_INTA_FAKE ? + "active" : "inactive"); } return 0; } @@ -491,7 +491,6 @@ U_BOOT_CMD( NULL ); - /* test-only */ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -503,11 +502,17 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) pciaddr &= 0xf0000000; /* map PCI address at 0xc0000000 in PLB space */ - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM1 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, 0xc0000000); /* PMM1 Local Address */ - out32r(PCIX0_PMM1PCILA, pciaddr); /* PMM1 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM1 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xf0000001); /* 256MB + No prefetching, and enable region */ + + /* PMM1 Mask/Attribute - disabled b4 setting */ + out32r(PCIX0_PMM1MA, 0x00000000); + /* PMM1 Local Address */ + out32r(PCIX0_PMM1LA, 0xc0000000); + /* PMM1 PCI Low Address */ + out32r(PCIX0_PMM1PCILA, pciaddr); + /* PMM1 PCI High Address */ + out32r(PCIX0_PMM1PCIHA, 0x00000000); + /* 256MB + No prefetching, and enable region */ + out32r(PCIX0_PMM1MA, 0xf0000001); } else { printf("Usage:\npmm %s\n", cmdtp->help); } diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index edf3a140b5..5b811bba9a 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. * Based on board/amcc/sequoia/sequoia.c * @@ -32,6 +32,7 @@ #include <ppc440.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/bitops.h> #include <command.h> #include <i2c.h> #ifdef CONFIG_RESET_PHY_R @@ -43,12 +44,12 @@ DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); int pci_is_66mhz(void); -int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); - +int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt); struct serial_device *default_serial_console(void) { @@ -70,7 +71,8 @@ struct serial_device *default_serial_console(void) /* mark scratchreg valid */ scratchreg = (scratchreg & 0xffffff00) | 0x80; - i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, 0x10, buf, 4); + i = bootstrap_eeprom_read(CFG_I2C_BOOT_EEPROM_ADDR, + 0x10, buf, 4); if ((i != -1) && (buf[0] == 0x19) && (buf[1] == 0x75)) { scratchreg |= buf[2]; @@ -99,10 +101,10 @@ int board_early_init_f(void) mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xf8400000); - /*-------------------------------------------------------------------- + /* * Setup the GPIO pins * TODO: setup GPIOs via CFG_4xx_GPIO_TABLE in board's config file - *-------------------------------------------------------------------*/ + */ out32(GPIO0_OR, 0x40000002); out32(GPIO0_TCR, 0x4c90011f); out32(GPIO0_OSRL, 0x28011400); @@ -141,9 +143,9 @@ int board_early_init_f(void) mtspr(dbcr0, 0x20000000); /* do chip reset */ } - /*-------------------------------------------------------------------- + /* * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ + */ mtdcr(uic0sr, 0xffffffff); /* clear all */ mtdcr(uic0er, 0x00000000); /* disable all */ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */ @@ -170,9 +172,11 @@ int board_early_init_f(void) /* select Ethernet pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; + sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | + SDR0_PFC1_SELECT_CONFIG_4; mfsdr(SDR0_PFC2, sdr0_pfc2); - sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; + sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | + SDR0_PFC2_SELECT_CONFIG_4; /* enable 2nd IIC */ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL; @@ -192,9 +196,9 @@ int board_early_init_f(void) return 0; } -/*---------------------------------------------------------------------------+ - | misc_init_r. - +---------------------------------------------------------------------------*/ +/* + * misc_init_r. + */ int misc_init_r(void) { uint pbcr; @@ -221,32 +225,7 @@ int misc_init_r(void) mtdcr(ebccfga, pb0cr); #endif pbcr = mfdcr(ebccfgd); - switch (gd->bd->bi_flashsize) { - case 1 << 20: - size_val = 0; - break; - case 2 << 20: - size_val = 1; - break; - case 4 << 20: - size_val = 2; - break; - case 8 << 20: - size_val = 3; - break; - case 16 << 20: - size_val = 4; - break; - case 32 << 20: - size_val = 5; - break; - case 64 << 20: - size_val = 6; - break; - case 128 << 20: - size_val = 7; - break; - } + size_val = ffs(gd->bd->bi_flashsize) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) mtdcr(ebccfga, pb2cr); @@ -286,20 +265,22 @@ int misc_init_r(void) mfsdr(SDR0_USB2H0CR, usb2h0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - /* An 8-bit/60MHz interface is the only possible alternative - when connecting the Device to the PHY */ + /* + * An 8-bit/60MHz interface is the only possible alternative + * when connecting the Device to the PHY + */ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/ + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; @@ -309,7 +290,7 @@ int misc_init_r(void) mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); - /*clear resets*/ + /* clear resets */ udelay(1000); mtsdr(SDR0_SRST1, 0x00000000); udelay(1000); @@ -317,18 +298,18 @@ int misc_init_r(void) printf("USB: Host\n"); - } else if ((strcmp(act, "dev") == 0) || (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { - /*-------------------PATCH-------------------------------*/ + } else if ((strcmp(act, "dev") == 0) || + (in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); udelay (1000); @@ -344,7 +325,6 @@ int misc_init_r(void) udelay (1000); mtsdr(SDR0_SRST1, 0x60306000); - /*-------------------PATCH-------------------------------*/ /* SDR Setting */ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); @@ -353,23 +333,23 @@ int misc_init_r(void) mfsdr(SDR0_PFC1, sdr0_pfc1); usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/ + usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/ + usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/ + sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; mtsdr(SDR0_USB2H0CR, usb2h0cr); mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); @@ -453,43 +433,42 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) } #endif -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. +/* + * pci_pre_init * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. * - ************************************************************************/ + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + */ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { unsigned long addr; - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ mfsdr(sdr_amp1, addr); mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb3_acr); mtdcr(plb3_acr, addr | 0x80000000); - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ + /* + * Set priority for all PLB4 devices to 0. + */ mfsdr(sdr_amp0, addr); mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00); addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */ mtdcr(plb4_acr, addr); - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ + /* + * Set Nebula PLB4 arbiter to fair mode. + */ /* Segment0 */ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair; addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled; @@ -512,64 +491,84 @@ int pci_pre_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. +/* + * pci_target_init * - ************************************************************************/ + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - /*--------------------------------------------------------------------------+ + char *ptmla_str, *ptmms_str; + + /* * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440EPX PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + */ + /* + * PowerPC440EPX PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0x80000000-0xBFFFFFFF + * ==> PCI address 0x80000000-0xBFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, and enable region */ + out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ + /* and enable region */ if (!is_monarch()) { - /* BAR1: top 64MB of RAM */ - out32r(PCIX0_PTM1MS, 0xfc000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x0c000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm1la"); + ptmms_str = getenv("ptm1ms"); + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM1MS, + simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM1LA, + simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR1: default top 64MB of RAM */ + out32r(PCIX0_PTM1MS, 0xfc000001); + out32r(PCIX0_PTM1LA, 0x0c000000); + } } else { - /* BAR1: complete 256MB RAM (TODO: make dynamic) */ - out32r(PCIX0_PTM1MS, 0xf0000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0x00000000); /* Local Addr. Reg */ + /* BAR1: default: complete 256MB RAM */ + out32r(PCIX0_PTM1MS, 0xf0000001); + out32r(PCIX0_PTM1LA, 0x00000000); } - /* BAR2: 16 MB FPGA registers */ - out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + ptmla_str = getenv("ptm2la"); /* Local Addr. Reg */ + ptmms_str = getenv("ptm2ms"); /* Memory Size/Attribute */ + if(NULL != ptmla_str && NULL != ptmms_str ) { + out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); + } else { + /* BAR2: default: 16 MB FPGA + registers */ + out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ + out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + } if (is_monarch()) { /* BAR2: map FPGA registers behind system memory at 1GB */ pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008); } - /*--------------------------------------------------------------------------+ + /* * Set up Configuration registers - *--------------------------------------------------------------------------*/ + */ /* Program the board's vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID); -#if 0 /* disabled for PMC405 backward compatibility */ + /* disabled for PMC405 backward compatibility */ /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); -#endif + /* pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); */ + /* 240nS PCI clock */ pci_write_config_word(0, PCI_LATENCY_TIMER, 1); @@ -587,8 +586,10 @@ void pci_target_init(struct pci_controller *hose) CFG_PCI_CLASSCODE_NONMONARCH); /* PCI configuration done: release ERREADY */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); - out_be32((void*)GPIO1_TCR, in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) | GPIO1_PPC_EREADY); + out_be32((void*)GPIO1_TCR, + in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); } else { /* Program the board's subsystem id/classcode */ pci_write_config_word(0, PCI_SUBSYSTEM_ID, @@ -599,20 +600,19 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ -/************************************************************************* - * pci_master_init - * - ************************************************************************/ +/* + * pci_master_init + */ #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { unsigned short temp_short; - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ if (is_monarch()) { pci_read_config_word(0, PCI_COMMAND, &temp_short); pci_write_config_word(0, PCI_COMMAND, @@ -622,7 +622,6 @@ void pci_master_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ - static void wait_for_pci_ready(void) { int i; @@ -649,22 +648,19 @@ static void wait_for_pci_ready(void) } } - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. +/* + * is_pci_host * - * Return 0 for adapter mode, non-zero for host (monarch) mode. + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. * - ************************************************************************/ + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ #if defined(CONFIG_PCI) int is_pci_host(struct pci_controller *hose) { @@ -681,6 +677,7 @@ int is_pci_host(struct pci_controller *hose) return 0; } #endif /* defined(CONFIG_PCI) */ + #if defined(CONFIG_POST) /* * Returns 1 if keys pressed to start the power-on long-running tests @@ -692,7 +689,6 @@ int post_hotkeys_pressed(void) } #endif /* CONFIG_POST */ - #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { @@ -713,17 +709,19 @@ void reset_phy(void) #endif #if defined(CFG_EEPROM_WREN) -/* Input: <dev_addr> I2C address of EEPROM device to enable. - * <state> -1: deliver current state +/* + * Input: <dev_addr> I2C address of EEPROM device to enable. + * <state> -1: deliver current state * 0: disable write * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done + * Returns: -1: wrong device address + * 0: dis-/en- able done * 0/1: current state if <state> was -1. */ int eeprom_write_enable(unsigned dev_addr, int state) { - if ((CFG_I2C_EEPROM_ADDR != dev_addr) && (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) { + if ((CFG_I2C_EEPROM_ADDR != dev_addr) && + (CFG_I2C_BOOT_EEPROM_ADDR != dev_addr)) { return -1; } else { switch (state) { @@ -747,9 +745,9 @@ int eeprom_write_enable(unsigned dev_addr, int state) } #endif /* #if defined(CFG_EEPROM_WREN) */ - #define CFG_BOOT_EEPROM_PAGE_WRITE_BITS 3 -int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) +int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; unsigned blk_off; @@ -758,7 +756,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un #if defined(CFG_EEPROM_WREN) eeprom_write_enable(dev_addr, 1); #endif - /* Write data until done or would cross a write page boundary. + /* + * Write data until done or would cross a write page boundary. * We must write the address again when changing pages * because the address counter only increments within a page. */ @@ -780,7 +779,8 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un #define BOOT_EEPROM_PAGE_SIZE (1 << CFG_BOOT_EEPROM_PAGE_WRITE_BITS) #define BOOT_EEPROM_PAGE_OFFSET(x) ((x) & (BOOT_EEPROM_PAGE_SIZE - 1)) - maxlen = BOOT_EEPROM_PAGE_SIZE - BOOT_EEPROM_PAGE_OFFSET(blk_off); + maxlen = BOOT_EEPROM_PAGE_SIZE - + BOOT_EEPROM_PAGE_OFFSET(blk_off); if (maxlen > I2C_RXTX_LEN) maxlen = I2C_RXTX_LEN; @@ -803,14 +803,15 @@ int bootstrap_eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer, un return rcode; } - -int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt) +int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, + uchar *buffer, unsigned cnt) { unsigned end = offset + cnt; unsigned blk_off; int rcode = 0; - /* Read data until done or would cross a page boundary. + /* + * Read data until done or would cross a page boundary. * We must write the address again when changing pages * because the next page may be in a different device. */ @@ -844,7 +845,6 @@ int bootstrap_eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, un return rcode; } - #if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_BOARD_INIT) int usb_board_init(void) { @@ -854,7 +854,8 @@ int usb_board_init(void) if ((act == NULL || strcmp(act, "hostdev") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) /* enable power on USB socket */ - out_be32((void*)GPIO1_OR, in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); for (i=0; i<1000; i++) udelay(1000); diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c index 88d5e8fb40..afc0eee3b7 100644 --- a/board/freescale/mpc8323erdb/mpc8323erdb.c +++ b/board/freescale/mpc8323erdb/mpc8323erdb.c @@ -185,3 +185,37 @@ void ft_board_setup(void *blob, bd_t *bd) #endif } #endif + +#if defined(CFG_I2C_MAC_OFFSET) +int mac_read_from_eeprom(void) +{ + uchar buf[28]; + char str[18]; + int i = 0; + unsigned int crc = 0; + unsigned char enetvar[32]; + + /* Read MAC addresses from EEPROM */ + if (eeprom_read(CFG_I2C_EEPROM_ADDR, CFG_I2C_MAC_OFFSET, buf, 28)) { + printf("\nEEPROM @ 0x%02x read FAILED!!!\n", + CFG_I2C_EEPROM_ADDR); + } else { + if (crc32(crc, buf, 24) == *(unsigned int *)&buf[24]) { + printf("Reading MAC from EEPROM\n"); + for (i = 0; i < 4; i++) { + if (memcmp(&buf[i * 6], "\0\0\0\0\0\0", 6)) { + sprintf(str, + "%02X:%02X:%02X:%02X:%02X:%02X", + buf[i * 6], buf[i * 6 + 1], + buf[i * 6 + 2], buf[i * 6 + 3], + buf[i * 6 + 4], buf[i * 6 + 5]); + sprintf((char *)enetvar, + i ? "eth%daddr" : "ethaddr", i); + setenv((char *)enetvar, str); + } + } + } + } + return 0; +} +#endif /* CONFIG_I2C_MAC_OFFSET */ diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index d90cdb3d3c..2119320da7 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -98,11 +98,8 @@ int board_early_init_f(void) /* Enable flash write */ bcsr[0xa] &= ~0x04; - /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */ - if (immr->sysconf.spridr == SPR_8360_REV20 || - immr->sysconf.spridr == SPR_8360E_REV20 || - immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) + /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */ + if (REVID_MAJOR(immr->sysconf.spridr) == 2) bcsr[0xe] = 0x30; /* Enable second UART */ @@ -308,8 +305,8 @@ void ft_board_setup(void *blob, bd_t *bd) * if on mpc8360ea rev. 2.1, * change both ucc phy-connection-types from rgmii-id to rgmii-rxid */ - if (immr->sysconf.spridr == SPR_8360_REV21 || - immr->sysconf.spridr == SPR_8360E_REV21) { + if ((REVID_MAJOR(immr->sysconf.spridr) == 2) && + (REVID_MINOR(immr->sysconf.spridr) == 1)) { int nodeoffset; const char *prop; int path; diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index e57a53fde3..f7cd5fe176 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -12,6 +12,8 @@ #include <common.h> #include <i2c.h> +#include <asm/io.h> +#include <asm/fsl_serdes.h> #include <spd_sdram.h> #if defined(CONFIG_OF_LIBFDT) #include <libfdt.h> @@ -29,6 +31,34 @@ int board_early_init_f(void) /* Clear all of the interrupt of BCSR */ bcsr[0xe] = 0xff; +#ifdef CONFIG_FSL_SERDES + immap_t *immr = (immap_t *)CFG_IMMR; + u32 spridr = in_be32(&immr->sysconf.spridr); + + /* we check only part num, and don't look for CPU revisions */ + switch (spridr) { + case SPR_8377: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8378: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + case SPR_8379: + fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); + break; + default: + printf("serdes not configured: unknown CPU part number: " + "%04x\n", spridr >> 16); + break; + } +#endif /* CONFIG_FSL_SERDES */ return 0; } diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 83fb60da00..e054f4e44d 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -140,24 +140,21 @@ int board_early_init_f(void) u32 spridr = in_be32(&immr->sysconf.spridr); /* we check only part num, and don't look for CPU revisions */ - switch (spridr >> 16) { - case SPR_8379E_REV10 >> 16: - case SPR_8379_REV10 >> 16: + switch (PARTID_NO_E(spridr)) { + case SPR_8377: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8378E_REV10 >> 16: - case SPR_8378_REV10 >> 16: + case SPR_8378: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_PEX, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; - case SPR_8377E_REV10 >> 16: - case SPR_8377_REV10 >> 16: + case SPR_8379: fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); - fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX, + fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA, FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V); break; default: diff --git a/board/korat/config.mk b/board/korat/config.mk index 39966e03eb..fa8374f17f 100644 --- a/board/korat/config.mk +++ b/board/korat/config.mk @@ -24,14 +24,24 @@ # Korat (PPC440EPx) board # -TEXT_BASE = 0xFFFA0000 - PLATFORM_CPPFLAGS += -DCONFIG_440=1 ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif +ifeq ($(emul),1) +PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2 +endif + ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8CFF0000 +endif + +ifeq ($(perm),1) +PLATFORM_CPPFLAGS += -DCONFIG_KORAT_PERMANENT +TEXT_BASE = 0xFFFA0000 +else +TEXT_BASE = 0xF7F60000 +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds endif diff --git a/board/korat/init.S b/board/korat/init.S index bd0e8b4daa..bf8b2c808b 100644 --- a/board/korat/init.S +++ b/board/korat/init.S @@ -43,7 +43,7 @@ tlbtab: * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) + tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_R|AC_W|AC_X|SA_G ) /* * TLB entries for SDRAM are not needed on this platform. They are @@ -52,24 +52,32 @@ tlbtab: #ifdef CFG_INIT_RAM_DCACHE /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, + AC_R|AC_W|AC_X|SA_G ) #endif /* TLB-entry for PCI Memory */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE + 0x00000000, SZ_256M, + CFG_PCI_MEMBASE + 0x00000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x10000000, SZ_256M, + CFG_PCI_MEMBASE + 0x10000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x20000000, SZ_256M, + CFG_PCI_MEMBASE + 0x20000000, 1, AC_R|AC_W|SA_G|SA_I ) + + tlbentry( CFG_PCI_MEMBASE + 0x30000000, SZ_256M, + CFG_PCI_MEMBASE + 0x30000000, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for EBC */ tlbentry( CFG_CPLD_BASE, SZ_1K, CFG_CPLD_BASE, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for Internal Registers & OCM */ /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ - tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I ) + tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_R|AC_W|AC_X|SA_I ) /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for peripherals */ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|SA_G|SA_I) @@ -78,3 +86,10 @@ tlbtab: tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_R|AC_W|SA_G|SA_I) tlbtab_end + +#if defined(CONFIG_KORAT_PERMANENT) + .globl korat_branch_absolute +korat_branch_absolute: + mtlr r3 + blr +#endif diff --git a/board/korat/korat.c b/board/korat/korat.c index 90fd0a7532..a7b4b27c6d 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -2,12 +2,12 @@ * (C) Copyright 2007-2008 * Larry Johnson, lrj@acm.org * - * (C) Copyright 2006-2008 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -39,12 +39,45 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ ulong flash_get_size(ulong base, int banknum); +#if defined(CONFIG_KORAT_PERMANENT) +void korat_buzzer(int const on) +{ + if (on) { + out_8((u8 *) CFG_CPLD_BASE + 0x05, + in_8((u8 *) CFG_CPLD_BASE + 0x05) | 0x80); + } else { + out_8((u8 *) CFG_CPLD_BASE + 0x05, + in_8((u8 *) CFG_CPLD_BASE + 0x05) & ~0x80); + } +} +#endif + int board_early_init_f(void) { - u32 sdr0_pfc1, sdr0_pfc2; - u32 reg; + uint32_t sdr0_pfc1, sdr0_pfc2; + uint32_t reg; int eth; +#if defined(CONFIG_KORAT_PERMANENT) + unsigned mscount; + + extern void korat_branch_absolute(uint32_t addr); + + for (mscount = 0; mscount < CFG_KORAT_MAN_RESET_MS; ++mscount) { + udelay(1000); + if (gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) { + /* This call does not return. */ + korat_branch_absolute( + CFG_FLASH1_TOP - 2 * CFG_ENV_SECT_SIZE - 4); + } + } + korat_buzzer(1); + while (!gpio_read_in_bit(CFG_GPIO_RESET_PRESSED_)) + udelay(1000); + + korat_buzzer(0); +#endif + mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); @@ -75,8 +108,11 @@ int board_early_init_f(void) mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */ mtdcr(uic2sr, 0xffffffff); /* clear all */ - /* take sim card reader and CF controller out of reset */ - out_8((u8 *) CFG_CPLD_BASE + 0x04, 0x80); + /* + * Take sim card reader and CF controller out of reset. Also enable PHY + * auto-detect until board-specific PHY resets are available. + */ + out_8((u8 *) CFG_CPLD_BASE + 0x02, 0xC0); /* Configure the two Ethernet PHYs. For each PHY, configure for fiber * if the SFP module is present, and for copper if it is not present. @@ -85,8 +121,8 @@ int board_early_init_f(void) if (gpio_read_in_bit(CFG_GPIO_SFP0_PRESENT_ + eth)) { /* SFP module not present: configure PHY for copper. */ /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ - out_8((u8 *) CFG_CPLD_BASE + 0x06, - in_8((u8 *) CFG_CPLD_BASE + 0x06) | + out_8((u8 *) CFG_CPLD_BASE + 0x03, + in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x06 << (4 * eth)); } else { /* SFP module present: configure PHY for fiber and @@ -99,10 +135,18 @@ int board_early_init_f(void) gpio_write_bit(CFG_GPIO_PHY0_EN, 1); gpio_write_bit(CFG_GPIO_PHY1_EN, 1); - /* select Ethernet pins */ + /* Wait 1 ms, then enable Fiber signal detect to PHYs. */ + udelay(1000); + out_8((u8 *) CFG_CPLD_BASE + 0x03, + in_8((u8 *) CFG_CPLD_BASE + 0x03) | 0x88); + + /* select Ethernet (and optionally IIC1) pins */ mfsdr(SDR0_PFC1, sdr0_pfc1); sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4; +#ifdef CONFIG_I2C_MULTI_BUS + sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); +#endif mfsdr(SDR0_PFC2, sdr0_pfc2); sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4; @@ -116,6 +160,58 @@ int board_early_init_f(void) return 0; } +/* + * The boot flash on CS0 normally has its write-enable pin disabled, and so will + * not respond to CFI commands. This routine therefore fills in the flash + * information for the boot flash. (The flash at CS1 operates normally.) + */ +ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) +{ + uint32_t addr; + int i; + + if (1 != banknum) + return 0; + + info->size = CFG_FLASH0_SIZE; + info->sector_count = CFG_FLASH0_SIZE / 0x20000; + info->flash_id = 0x01000000; + info->portwidth = 2; + info->chipwidth = 2; + info->buffer_size = 32; + info->erase_blk_tout = 16384; + info->write_tout = 2; + info->buffer_write_tout = 5; + info->vendor = 2; + info->cmd_reset = 0x00F0; + info->interface = 2; + info->legacy_unlock = 0; + info->manufacturer_id = 1; + info->device_id = 0x007E; + +#if CFG_FLASH0_SIZE == 0x01000000 + info->device_id2 = 0x2101; +#elif CFG_FLASH0_SIZE == 0x04000000 + info->device_id2 = 0x2301; +#else +#error Unable to set device_id2 for current CFG_FLASH0_SIZE +#endif + + info->ext_addr = 0x0040; + info->cfi_version = 0x3133; + info->cfi_offset = 0x0055; + info->addr_unlock1 = 0x00000555; + info->addr_unlock2 = 0x000002AA; + info->name = "CFI conformant"; + for (i = 0, addr = -info->size; + i < info->sector_count; + ++i, addr += 0x20000) { + info->start[i] = addr; + info->protect[i] = 0x00; + } + return 1; +} + static int man_data_read(unsigned int addr) { /* @@ -189,12 +285,20 @@ static void set_serial_number(void) * If the environmental variable "serial#" is not set, try to set it * from the manufacturer's information serial EEPROM. */ - char s[MAN_SERIAL_NO_LENGTH + 1]; + char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2]; + + if (getenv("serial#")) + return; + + if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH)) + return; + + s[MAN_INFO_LENGTH] = '-'; + if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD, + MAN_MAC_ADDR_LENGTH)) + return; - if (0 == getenv("serial#") && - 0 != man_data_read_field(s, MAN_SERIAL_NO_FIELD, - MAN_SERIAL_NO_LENGTH)) - setenv("serial#", s); + setenv("serial#", s); } static void set_mac_addresses(void) @@ -204,45 +308,58 @@ static void set_mac_addresses(void) * set, try to set them from the manufacturer's information serial * EEPROM. */ - char s[MAN_MAC_ADDR_LENGTH + 1]; + +#if MAN_MAC_ADDR_LENGTH % 2 != 0 +#error MAN_MAC_ADDR_LENGTH must be an even number +#endif + + char s[(3 * MAN_MAC_ADDR_LENGTH) / 2]; + char *src; + char *dst; if (0 != getenv("ethaddr") && 0 != getenv("eth1addr")) return; - if (0 == man_data_read_field(s, MAN_MAC_ADDR_FIELD, - MAN_MAC_ADDR_LENGTH)) + if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1, + MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH)) return; + for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) { + *dst++ = *src++; + *dst++ = *src++; + *dst++ = ':'; + } if (0 == getenv("ethaddr")) setenv("ethaddr", s); if (0 == getenv("eth1addr")) { - ++s[MAN_MAC_ADDR_LENGTH - 1]; + ++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2]; setenv("eth1addr", s); } } int misc_init_r(void) { - uint pbcr; - int size_val = 0; - u32 reg; + uint32_t pbcr; + int size_val; + uint32_t reg; unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; - char *act = getenv("usbact"); - - /* Re-do flash sizing to get full correct info */ + uint32_t const flash1_size = gd->bd->bi_flashsize - CFG_FLASH0_SIZE; + char const *const act = getenv("usbact"); - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + /* + * Re-do FLASH1 sizing and adjust flash start and offset. + */ + gd->bd->bi_flashstart = CFG_FLASH1_TOP - flash1_size; gd->bd->bi_flashoffset = 0; - mtdcr(ebccfga, pb0cr); + mtdcr(ebccfga, pb1cr); pbcr = mfdcr(ebccfgd); - size_val = ffs(gd->bd->bi_flashsize) - 21; + size_val = ffs(flash1_size) - 21; pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(ebccfga, pb0cr); + mtdcr(ebccfga, pb1cr); mtdcr(ebccfgd, pbcr); /* @@ -250,14 +367,37 @@ int misc_init_r(void) */ flash_get_size(gd->bd->bi_flashstart, 0); - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, - &flash_info[0]); + /* + * Re-do FLASH1 sizing and adjust flash offset to reserve space for + * environment + */ + gd->bd->bi_flashoffset = + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - CFG_FLASH1_ADDR; + mtdcr(ebccfga, pb1cr); + pbcr = mfdcr(ebccfgd); + size_val = ffs(gd->bd->bi_flashsize - CFG_FLASH0_SIZE) - 21; + pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); + mtdcr(ebccfga, pb1cr); + mtdcr(ebccfgd, pbcr); + + /* Monitor protection ON by default */ +#if defined(CONFIG_KORAT_PERMANENT) + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + flash_info + 1); +#else + (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE, + CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1, + flash_info); +#endif /* Env protection ON by default */ + (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + flash_info); (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND, - CFG_ENV_ADDR_REDUND + 2 * CFG_ENV_SECT_SIZE - 1, - &flash_info[0]); + CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1, + flash_info); /* * USB suff... @@ -393,6 +533,8 @@ int misc_init_r(void) set_serial_number(); set_mac_addresses(); + gpio_write_bit(CFG_GPIO_ATMEGA_RESET_, 1); + return 0; } @@ -402,10 +544,10 @@ int checkboard(void) u8 const rev = in_8((u8 *) CFG_CPLD_BASE + 0); printf("Board: Korat, Rev. %X", rev); - if (s != NULL) + if (s) printf(", serial# %s", s); - printf(", Ethernet PHY 0: "); + printf(".\n Ethernet PHY 0: "); if (gpio_read_out_bit(CFG_GPIO_PHY0_FIBER_SEL)) printf("fiber"); else @@ -418,7 +560,10 @@ int checkboard(void) printf("copper"); printf(".\n"); - return (0); +#if defined(CONFIG_KORAT_PERMANENT) + printf(" Executing permanent copy of U-Boot.\n"); +#endif + return 0; } #if defined(CFG_DRAM_TEST) @@ -529,23 +674,26 @@ void pci_target_init(struct pci_controller *hose) /* * PowerPC440EPX PCI Master configuration. * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF + * PLB address 0x80000000-0xBFFFFFFF + * ==> PCI address 0x80000000-0xBFFFFFFF * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM0PCILA, + CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_PMM1LA, + CFG_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ + out32r(PCIX0_PMM1PCILA, + CFG_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds new file mode 100644 index 0000000000..cceb4f5026 --- /dev/null +++ b/board/korat/u-boot-F7FC.lds @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xF7FBFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xF7FBF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index affaeff1ae..7c3cf496be 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -6,7 +6,7 @@ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com * - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -35,6 +35,7 @@ #include <asm/mmu.h> #include <asm/io.h> #include <ppc440.h> +#include <watchdog.h> /* * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory @@ -99,87 +100,37 @@ static void wait_ddr_idle(void) */ } -static void blank_string(int size) -{ - int i; - - for (i=0; i<size; i++) - putc('\b'); - for (i=0; i<size; i++) - putc(' '); - for (i=0; i<size; i++) - putc('\b'); -} - static void program_ecc(u32 start_address, u32 num_bytes, u32 tlb_word2_i_value) { - u32 current_address; - u32 end_address; - u32 address_increment; u32 val; - char str[] = "ECC generation -"; - char slash[] = "\\|/-\\|/-"; - int loop = 0; - int loopi = 0; - - current_address = start_address; + u32 current_addr = start_address; + int bytes_remaining; sync(); - eieio(); wait_ddr_idle(); - if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) { - /* ECC bit set method for non-cached memory */ - address_increment = 4; - end_address = current_address + num_bytes; - - puts(str); - - while (current_address < end_address) { - *((u32 *)current_address) = 0x00000000; - current_address += address_increment; - - if ((loop++ % (2 << 20)) == 0) { - putc('\b'); - putc(slash[loopi++ % 8]); - } - } + /* + * Because of 440EPx errata CHIP 11, we don't touch the last 256 + * bytes of SDRAM. + */ + bytes_remaining = num_bytes - CFG_MEM_TOP_HIDE; - blank_string(strlen(str)); - } else { - /* ECC bit set method for cached memory */ -#if 0 /* test-only: will remove this define later, when ECC problems are solved! */ - /* - * Some boards (like lwmon5) need to preserve the memory - * content upon ECC generation (for the log-buffer). - * Therefore we don't fill the memory with a pattern or - * just zero it, but write the same values back that are - * already in the memory cells. - */ - address_increment = CFG_CACHELINE_SIZE; - end_address = current_address + num_bytes; - - current_address = start_address; - while (current_address < end_address) { - /* - * TODO: Th following sequence doesn't work correctly. - * Just invalidating and flushing the cache doesn't - * seem to trigger the re-write of the memory. - */ - ppcDcbi(current_address); - ppcDcbf(current_address); - current_address += CFG_CACHELINE_SIZE; - } -#else - dcbz_area(start_address, num_bytes); - dflush(); -#endif + /* + * We have to write the ECC bytes by zeroing and flushing in smaller + * steps, since the whole 256MByte takes too long for the external + * watchdog. + */ + while (bytes_remaining > 0) { + dcbz_area(current_addr, min((64 << 20), bytes_remaining)); + current_addr += 64 << 20; + bytes_remaining -= 64 << 20; + WATCHDOG_RESET(); } + dflush(); sync(); - eieio(); wait_ddr_idle(); /* Clear error status */ @@ -191,7 +142,6 @@ static void program_ecc(u32 start_address, mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF)); sync(); - eieio(); wait_ddr_idle(); } #endif diff --git a/board/mpr2/Makefile b/board/mpr2/Makefile new file mode 100644 index 0000000000..17ca17ec5b --- /dev/null +++ b/board/mpr2/Makefile @@ -0,0 +1,54 @@ +# +# Copyright (C) 2007 +# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# (C) Copyright 2008 +# Mark Jonas <mark.jonas@de.bosch.com> +# +# board/mpr2/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := mpr2.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/mpr2/config.mk b/board/mpr2/config.mk new file mode 100644 index 0000000000..6d41d97cb7 --- /dev/null +++ b/board/mpr2/config.mk @@ -0,0 +1,37 @@ +# +# Copyright (C) 2007 +# Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> +# +# Copyright (C) 2007 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# Copyright (C) 2007 +# Kenati Technologies, Inc. +# +# Copyright (C) 2008 +# Mark Jonas <mark.jonas@de.bosch.com> +# +# board/mpr2/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x8FFC0000 diff --git a/board/mpr2/lowlevel_init.S b/board/mpr2/lowlevel_init.S new file mode 100644 index 0000000000..060957ad06 --- /dev/null +++ b/board/mpr2/lowlevel_init.S @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * (C) Copyright 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * board/mpr2/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + +/* + * Set frequency multipliers and dividers in FRQCR. + */ + mov.l WTCSR_A,r1 + mov.l WTCSR_D,r0 + mov.w r0,@r1 + + mov.l WTCNT_A,r1 + mov.l WTCNT_D,r0 + mov.w r0,@r1 + + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.w r0,@r1 + +/* + * Setup CS0 (Flash). + */ + mov.l CS0BCR_A, r1 + mov.l CS0BCR_D, r0 + mov.l r0, @r1 + + mov.l CS0WCR_A, r1 + mov.l CS0WCR_D, r0 + mov.l r0, @r1 + +/* + * Setup CS3 (SDRAM). + */ + mov.l CS3BCR_A, r1 + mov.l CS3BCR_D, r0 + mov.l r0, @r1 + + mov.l CS3WCR_A, r1 + mov.l CS3WCR_D, r0 + mov.l r0, @r1 + + mov.l SDCR_A, r1 + mov.l SDCR_D1, r0 + mov.l r0, @r1 + + mov.l RTCSR_A, r1 + mov.l RTCSR_D, r0 + mov.l r0, @r1 + + mov.l RTCNT_A, r1 + mov.l RTCNT_D, r0 + mov.l r0, @r1 + + mov.l RTCOR_A, r1 + mov.l RTCOR_D, r0 + mov.l r0, @r1 + + mov.l SDCR_A, r1 + mov.l SDCR_D2, r0 + mov.l r0, @r1 + + mov.l SDMR3_A, r1 + mov.l SDMR3_D, r0 + add r0, r1 + mov #0, r0 + mov.w r0, @r1 + + rts + nop + + .align 4 + +/* + * Configuration for MPR2 A.3 through A.7 + */ + +/* + * PLL Settings + */ +FRQCR_D: .long 0x1103 /* I:B:P=8:4:2 */ +WTCNT_D: .long 0x5A00 /* start counting at zero */ +WTCSR_D: .long 0xA507 /* divide by 4096 */ + +/* + * Spansion S29GL256N11 @ 48 MHz + */ +CS0BCR_D: .long 0x12490400 /* 1 idle cycle inserted, normal space, 16 bit */ +CS0WCR_D: .long 0x00000340 /* tSW=0.5ck, 6 wait cycles, NO external wait, tHW=0.5ck */ + +/* + * Samsung K4S511632B-UL75 @ 48 MHz + * Micron MT48LC32M16A2-75 @ 48 MHz + */ +CS3BCR_D: .long 0x10004400 /* CS3BCR = 0x10004400, minimum idle cycles, SDRAM, 16 bit */ +CS3WCR_D: .long 0x00000091 /* tRP=1ck, tRCD=1ck, CL=2, tRWL=2ck, tRC=4ck */ +SDCR_D1: .long 0x00000012 /* no refresh, 13 rows, 10 cols, NO bank active mode */ +SDCR_D2: .long 0x00000812 /* refresh */ +RTCSR_D: .long 0xA55A0008 /* 1/4, once */ +RTCNT_D: .long 0xA55A005D /* count 93 */ +RTCOR_D: .long 0xa55a005d /* count 93 */ +SDMR3_D: .long 0x440 /* mode register CL2, burst read and SINGLE WRITE */ + +/* + * Registers + */ + +FRQCR_A: .long 0xA415FF80 +WTCNT_A: .long 0xA415FF84 +WTCSR_A: .long 0xA415FF86 + +#define BSC_BASE 0xA4FD0000 +CS0BCR_A: .long BSC_BASE + 0x04 +CS3BCR_A: .long BSC_BASE + 0x0C +CS0WCR_A: .long BSC_BASE + 0x24 +CS3WCR_A: .long BSC_BASE + 0x2C +SDCR_A: .long BSC_BASE + 0x44 +RTCSR_A: .long BSC_BASE + 0x48 +RTCNT_A: .long BSC_BASE + 0x4C +RTCOR_A: .long BSC_BASE + 0x50 +SDMR3_A: .long BSC_BASE + 0x5000 diff --git a/board/mpr2/mpr2.c b/board/mpr2/mpr2.c new file mode 100644 index 0000000000..2ddb0c10c1 --- /dev/null +++ b/board/mpr2/mpr2.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * board/mpr2/mpr2.c + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/processor.h> + +int checkboard(void) +{ + puts("BOARD: MPR2\n"); + return 0; +} + +int board_init(void) +{ + /* + * For MPR2 A.3 through A.7 + */ + + /* CS2: Ethernet (0xA8000000 - 0xABFFFFFF) */ + __raw_writel(0x36db0400, CS2BCR); /* 4 idle cycles, normal space, 16 bit data bus */ + __raw_writel(0x000003c0, CS2WCR); /* (WR:8), no ext. wait */ + + /* CS4: CAN1 (0xB0000000 - 0xB3FFFFFF) */ + __raw_writel(0x00000200, CS4BCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS4WCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS5a: CAN2 (0xB4000000 - 0xB5FFFFFF) */ + __raw_writel(0x00000200, CS5ABCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS5AWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS5b: CAN3 (0xB6000000 - 0xB7FFFFFF) */ + __raw_writel(0x00000200, CS5BBCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x00100981, CS5BWCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ + + /* CS6a: Rotary (0xB8000000 - 0xB9FFFFFF) */ + __raw_writel(0x00000200, CS6ABCR); /* no idle cycles, normal space, 8 bit data bus */ + __raw_writel(0x001009C1, CS6AWCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ + + /* set Pin Select Register A: /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */ + __raw_writew(0xAABC, PSELA); /* 10 10 10 10 10 11 11 00 */ + + /* set Pin Select Register B: /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */ + __raw_writew(0x3C00, PSELB); /* 0 0 11 11 0 0 00000000 */ + + /* set Pin Select Register C: SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */ + __raw_writew(0x0000, PSELC); /* 00 00 00 00 00000000 */ + + /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */ + __raw_writew(0x0000, PSELD); /* 0 00 00 00 00 00 00 00 0 */ + + /* OTH: (00) Other fuction + * GPO: (01) General Purpose Output + * GPI: (11) General Purpose Input + * GPI+: (10) General Purpose Input with internal pull-up + *------------------------------------------------------- + * A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); + * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ + __raw_writew(0x5555, PACR); /* 01 01 01 01 01 01 01 01 */ + + /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); + * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ + __raw_writew(0x5555, PBCR); /* 01 01 01 01 01 01 01 01 */ + + /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); + * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ + __raw_writew(0x5500, PCCR); /* 01 01 01 01 00 00 00 00 */ + + /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); + * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */ + __raw_writew(0x5555, PDCR); /* 01 01 01 01 01 01 01 01 */ + + /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; + * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */ + __raw_writew(0x2800, PECR); /* 00 10 10 00 00 00 00 00 */ + + /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; + * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */ + __raw_writew(0x0002, PFCR); /* 00 00 00 00 00 00 00 10 */ + + /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ);G4 GPI(KEY2); + * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */ + __raw_writew(0x03D5, PGCR); /* 00 00 00 11 11 01 01 01 */ + + /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); + * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */ + __raw_writew(0x0050, PHCR); /* 00 00 00 00 01 01 00 00 */ + + /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; + * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */ + __raw_writew(0x0000, PJCR); /* 00 00 00 00 00 00 00 00 */ + + /* K7 (x); K6 (x); K5 (x); K4 (x) + * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nc); K0 PINT4(FLASH_READY); */ + __raw_writew(0x00FB, PKCR); /* 00 00 00 00 11 11 10 11 */ + + /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; + * L3 TCK; L2 (x); L1 (x); L0 (x); */ + __raw_writew(0x0000, PLCR); /* 00 00 00 00 00 00 00 00 */ + + /* M7 GPO(CURRENT_SINK);M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); M4 GPO(LAN_RESET); + * M3 GPO(BUZZER); M2 GPO(LCD_BL); M1 CS5B(CAN3_CS); M0 GPI+(nc); */ + __raw_writew(0x5552, PMCR); /* 01 01 01 01 01 01 00 10 */ + __raw_writeb(0xF0, PMDR); /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, LAN_RESET=off, BUZZER=off, LCD_BL=off */ + + /* P7 (x); P6 (x); P5 (x); P4 GPO(on pullup); + * P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ); */ + __raw_writew(0x0100, PPCR); /* 00 00 00 01 00 00 00 00 */ + __raw_writeb(0x10, PPDR); /* no current flow through pullup */ + + /* R7 A25; R6 A24; R5 A23; R4 A22; + * R3 A21; R2 A20; R1 A19; R0 A0; */ + __raw_writew(0x0000, PRCR); /* 00 00 00 00 00 00 00 00 */ + + /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); + * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */ + __raw_writew(0x0140, PSCR); /* 00 00 00 01 01 00 00 00 */ + + /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; + * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG); */ + __raw_writew(0x0001, PTCR); /* 00 00 00 00 00 00 00 01 */ + + /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); + * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */ + __raw_writew(0x0240, PUCR); /* 00 00 00 10 01 00 00 00 */ + + /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); + * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */ + __raw_writew(0x0142, PVCR); /* 00 00 00 01 01 00 00 10 */ + + return 0; +} + +int dram_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("SDRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + diff --git a/board/mpr2/u-boot.lds b/board/mpr2/u-boot.lds new file mode 100644 index 0000000000..6fee7f2542 --- /dev/null +++ b/board/mpr2/u-boot.lds @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2007 + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright (C) 2007 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x8C000000. + U-Boot resides in the last 256 kB of the 64 MB. + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x8C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh3/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index b76449989b..287f32e587 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -23,10 +23,12 @@ #include <common.h> -#include <asm/processor.h> +#include <libfdt.h> +#include <fdt_support.h> #include <spd_sdram.h> #include <ppc4xx_enet.h> #include <miiphy.h> +#include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; @@ -315,3 +317,24 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + u32 val[4]; + int rc; + + ft_cpu_setup(blob, bd); + + /* Fixup NOR mapping */ + val[0] = 0; /* chip select number */ + val[1] = 0; /* always 0 */ + val[2] = gd->bd->bi_flashstart; + val[3] = gd->bd->bi_flashsize; + rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", + val, sizeof(val), 1); + if (rc) + printf("Unable to update property NOR mapping, err=%s\n", + fdt_strerror(rc)); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S index 135674c26a..76164ce1db 100644 --- a/board/prodrive/alpr/init.S +++ b/board/prodrive/alpr/init.S @@ -90,7 +90,16 @@ tlbtab: tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) +#ifdef CONFIG_4xx_DCACHE + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G) +#else tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) +#endif + +#ifdef CFG_INIT_RAM_DCACHE + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) +#endif tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) /* PCI */ diff --git a/board/r2dplus/Makefile b/board/r2dplus/Makefile new file mode 100644 index 0000000000..ed609ea67e --- /dev/null +++ b/board/r2dplus/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2007,2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := r2dplus.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +################################################################# + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +################################################################# diff --git a/board/r2dplus/config.mk b/board/r2dplus/config.mk new file mode 100644 index 0000000000..1ec7dcc605 --- /dev/null +++ b/board/r2dplus/config.mk @@ -0,0 +1,23 @@ +# +# Copyright (C) 2007,2008 +# Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# +TEXT_BASE = 0x0FFC0000 diff --git a/board/r2dplus/lowlevel_init.S b/board/r2dplus/lowlevel_init.S new file mode 100644 index 0000000000..5755de87b9 --- /dev/null +++ b/board/r2dplus/lowlevel_init.S @@ -0,0 +1,154 @@ +/* + * modified from SH-IPL+g (init-r0p751rlc0011rl.S) + * Initial Register Data for R0P751RLC0011RL (SH7751R 240MHz/120MHz/60MHz) + * Coyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> +*/ + +#include <config.h> +#include <version.h> + +#include <asm/processor.h> + + .global lowlevel_init + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 + mov.l CCR_D_D, r0 + mov.l r0,@r1 + + mov.l MMUCR_A,r1 + mov.l MMUCR_D,r0 + mov.w r0,@r1 + + mov.l BCR1_A,r1 + mov.l BCR1_D,r0 + mov.l r0,@r1 + + mov.l BCR2_A,r1 + mov.l BCR2_D,r0 + mov.w r0,@r1 + + mov.l BCR3_A,r1 + mov.l BCR3_D,r0 + mov.w r0,@r1 + + mov.l BCR4_A,r1 + mov.l BCR4_D,r0 + mov.l r0,@r1 + + mov.l WCR1_A,r1 + mov.l WCR1_D,r0 + mov.l r0,@r1 + + mov.l WCR2_A,r1 + mov.l WCR2_D,r0 + mov.l r0,@r1 + + mov.l WCR3_A,r1 + mov.l WCR3_D,r0 + mov.l r0,@r1 + + mov.l PCR_A,r1 + mov.l PCR_D,r0 + mov.w r0,@r1 + + mov.l LED_A,r1 + mov #0xff,r0 + mov.w r0,@r1 + + mov.l MCR_A,r1 + mov.l MCR_D1,r0 + mov.l r0,@r1 + + mov.l RTCNT_A,r1 + mov.l RTCNT_D,r0 + mov.w r0,@r1 + + mov.l RTCOR_A,r1 + mov.l RTCOR_D,r0 + mov.w r0,@r1 + + mov.l RFCR_A,r1 + mov.l RFCR_D,r0 + mov.w r0,@r1 + + mov.l RTCSR_A,r1 + mov.l RTCSR_D,r0 + mov.w r0,@r1 + + mov.l SDMR3_A,r1 + mov #0x55,r0 + mov.b r0,@r1 + + /* Wait DRAM refresh 30 times */ + mov.l RFCR_A,r1 + mov #30,r3 +1: + mov.w @r1,r0 + extu.w r0,r2 + cmp/hi r3,r2 + bf 1b + + mov.l MCR_A,r1 + mov.l MCR_D2,r0 + mov.l r0,@r1 + + mov.l SDMR3_A,r1 + mov #0,r0 + mov.b r0,@r1 + + mov.l IRLMASK_A,r1 + mov.l IRLMASK_D,r0 + mov.l r0,@r1 + + mov.l CCR_A, r1 + mov.l CCR_D_E, r0 + mov.l r0, @r1 + + rts + nop + + .align 2 +CCR_A: .long CCR /* Cache Control Register */ +CCR_D_D: .long 0x0808 /* Flush the cache, disable */ +CCR_D_E: .long 0x8000090B + +FRQCR_A: .long FRQCR /* FRQCR Address */ +FRQCR_D: .long 0x00000e0a /* 03/07/15 modify */ +BCR1_A: .long BCR1 /* BCR1 Address */ +BCR1_D: .long 0x00180008 +BCR2_A: .long BCR2 /* BCR2 Address */ +BCR2_D: .long 0xabe8 +BCR3_A: .long BCR3 /* BCR3 Address */ +BCR3_D: .long 0x0000 +BCR4_A: .long BCR4 /* BCR4 Address */ +BCR4_D: .long 0x00000010 +WCR1_A: .long WCR1 /* WCR1 Address */ +WCR1_D: .long 0x33343333 +WCR2_A: .long WCR2 /* WCR2 Address */ +WCR2_D: .long 0xcff86fbf +WCR3_A: .long WCR3 /* WCR3 Address */ +WCR3_D: .long 0x07777707 +LED_A: .long 0x04000036 /* LED Address */ +RTCNT_A: .long RTCNT /* RTCNT Address */ +RTCNT_D: .long 0xA500 /* RTCNT Write Code A5h Data 00h */ +RTCOR_A: .long RTCOR /* RTCOR Address */ +RTCOR_D: .long 0xA534 /* RTCOR Write Code */ +RTCSR_A: .long RTCSR /* RTCSR Address */ +RTCSR_D: .long 0xA510 /* RTCSR Write Code */ +SDMR3_A: .long 0xFF9400CC /* SDMR3 Address */ +SDMR3_D: .long 0x55 +MCR_A: .long MCR /* MCR Address */ +MCR_D1: .long 0x081901F4 /* MRSET:'0' */ +MCR_D2: .long 0x481901F4 /* MRSET:'1' */ +RFCR_A: .long RFCR /* RFCR Address */ +RFCR_D: .long 0xA400 /* RFCR Write Code A4h Data 00h */ +PCR_A: .long PCR /* PCR Address */ +PCR_D: .long 0x0000 +MMUCR_A: .long MMUCR /* MMUCCR Address */ +MMUCR_D: .long 0x00000000 /* MMUCCR Data */ +IRLMASK_A: .long 0xA4000000 /* IRLMASK Address */ +IRLMASK_D: .long 0x00000000 /* IRLMASK Data */ diff --git a/board/r2dplus/r2dplus.c b/board/r2dplus/r2dplus.c new file mode 100644 index 0000000000..2ee3ea2f3f --- /dev/null +++ b/board/r2dplus/r2dplus.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ide.h> +#include <asm/processor.h> +#include <asm/pci.h> + +int checkboard(void) +{ + puts("BOARD: Renesas Solutions R2D Plus\n"); + return 0; +} + +int board_init(void) +{ + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +int board_late_init(void) +{ + return 0; +} + +#define FPGA_BASE 0xA4000000 +#define FPGA_CFCTL (FPGA_BASE + 0x04) +#define FPGA_CFPOW (FPGA_BASE + 0x06) +#define FPGA_CFCDINTCLR (FPGA_BASE + 0x2A) + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + if (idereset){ + (*(vu_short *)FPGA_CFCTL) = 0x432; + (*(vu_short *)FPGA_CFPOW) |= 0x02; + (*(vu_short *)FPGA_CFCDINTCLR) = 0x01; + } +} + +#if defined(CONFIG_PCI) +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7751_init( &hose ); +} +#endif /* CONFIG_PCI */ diff --git a/board/r2dplus/u-boot.lds b/board/r2dplus/u-boot.lds new file mode 100644 index 0000000000..96d8d81acf --- /dev/null +++ b/board/r2dplus/u-boot.lds @@ -0,0 +1,105 @@ +/* + * Copyrigth (c) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x0C000000 + (64*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/board/r7780mp/Makefile b/board/r7780mp/Makefile new file mode 100644 index 0000000000..554dca1d5f --- /dev/null +++ b/board/r7780mp/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# +# board/r7780mp/Makefile +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := r7780mp.o +SOBJS := lowlevel_init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/r7780mp/config.mk b/board/r7780mp/config.mk new file mode 100644 index 0000000000..6a045a15c2 --- /dev/null +++ b/board/r7780mp/config.mk @@ -0,0 +1,27 @@ +# +# Copyright (C) 2007,2008 Nobuhiro Iwamatsu +# +# board/r77870mp/config.mk +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +# +# TEXT_BASE refers to image _after_ relocation. +# +# NOTE: Must match value used in u-boot.lds (in this directory). +# + +TEXT_BASE = 0x0FFC0000 diff --git a/board/r7780mp/lowlevel_init.S b/board/r7780mp/lowlevel_init.S new file mode 100644 index 0000000000..eb5d8b721d --- /dev/null +++ b/board/r7780mp/lowlevel_init.S @@ -0,0 +1,428 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu + * + * u-boot/board/r7780mp/lowlevel_init.S + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/processor.h> + +/* + * Board specific low level init code, called _very_ early in the + * startup sequence. Relocation to SDRAM has not happened yet, no + * stack is available, bss section has not been initialised, etc. + * + * (Note: As no stack is available, no subroutines can be called...). + */ + + .global lowlevel_init + + .text + .align 2 + +lowlevel_init: + + mov.l CCR_A, r1 /* Address of Cache Control Register */ + mov.l CCR_D, r0 /* Instruction Cache Invalidate */ + mov.l r0, @r1 + + mov.l FRQCR_A, r1 /* Frequency control register */ + mov.l FRQCR_D, r0 + mov.l r0, @r1 + + /* pin_multi_setting */ + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR1,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR1_A,r1 + mov.l BBG_PMSR1_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR2,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR2_A,r1 + mov.l BBG_PMSR2_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR3,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR3_A,r1 + mov.l BBG_PMSR3_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSR4,r0 + mov.l r0,@r1 + + mov.l BBG_PMSR4_A,r1 + mov.l BBG_PMSR4_D,r0 + mov.l r0,@r1 + + mov.l BBG_PMMR_A,r1 + mov.l BBG_PMMR_D_PMSRG,r0 + mov.l r0,@r1 + + mov.l BBG_PMSRG_A,r1 + mov.l BBG_PMSRG_D,r0 + mov.l r0,@r1 + + /* cpg_setting */ + mov.l FRQCR_A,r1 + mov.l FRQCR_D,r0 + mov.l r0,@r1 + + mov.l DLLCSR_A,r1 + mov.l DLLCSR_D,r0 + mov.l r0,@r1 + + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + /* wait 200us */ + mov.l REPEAT0_R3,r3 + mov #0,r2 +repeat0: + add #1,r2 + cmp/hs r3,r2 + bf repeat0 + nop + + /* bsc_setting */ + mov.l MMSELR_A,r1 + mov.l MMSELR_D,r0 + mov.l r0,@r1 + + mov.l BCR_A,r1 + mov.l BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0BCR_A,r1 + mov.l CS0BCR_D,r0 + mov.l r0,@r1 + + mov.l CS1BCR_A,r1 + mov.l CS1BCR_D,r0 + mov.l r0,@r1 + + mov.l CS2BCR_A,r1 + mov.l CS2BCR_D,r0 + mov.l r0,@r1 + + mov.l CS4BCR_A,r1 + mov.l CS4BCR_D,r0 + mov.l r0,@r1 + + mov.l CS5BCR_A,r1 + mov.l CS5BCR_D,r0 + mov.l r0,@r1 + + mov.l CS6BCR_A,r1 + mov.l CS6BCR_D,r0 + mov.l r0,@r1 + + mov.l CS0WCR_A,r1 + mov.l CS0WCR_D,r0 + mov.l r0,@r1 + + mov.l CS1WCR_A,r1 + mov.l CS1WCR_D,r0 + mov.l r0,@r1 + + mov.l CS2WCR_A,r1 + mov.l CS2WCR_D,r0 + mov.l r0,@r1 + + mov.l CS4WCR_A,r1 + mov.l CS4WCR_D,r0 + mov.l r0,@r1 + + mov.l CS5WCR_A,r1 + mov.l CS5WCR_D,r0 + mov.l r0,@r1 + + mov.l CS6WCR_A,r1 + mov.l CS6WCR_D,r0 + mov.l r0,@r1 + + mov.l CS5PCR_A,r1 + mov.l CS5PCR_D,r0 + mov.l r0,@r1 + + mov.l CS6PCR_A,r1 + mov.l CS6PCR_D,r0 + mov.l r0,@r1 + + /* ddr_setting */ + /* wait 200us */ + mov.l REPEAT0_R3,r3 + mov #0,r2 +repeat1: + add #1,r2 + cmp/hs r3,r2 + bf repeat1 + nop + + mov.l MIM_U_A,r0 + mov.l MIM_U_D,r1 + synco + mov.l r1,@r0 + synco + + mov.l MIM_L_A,r0 + mov.l MIM_L_D0,r1 + synco + mov.l r1,@r0 + synco + + mov.l STR_L_A,r0 + mov.l STR_L_D,r1 + synco + mov.l r1,@r0 + synco + + mov.l SDR_L_A,r0 + mov.l SDR_L_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D0,r1 + synco + mov.l r1,@r0 + synco + + mov.l SCR_L_A,r0 + mov.l SCR_L_D1,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l EMRS_A,r0 + mov.l EMRS_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l MRS1_A,r0 + mov.l MRS1_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D2,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D3,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D4,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l MRS2_A,r0 + mov.l MRS2_D,r1 + synco + mov.l r1,@r0 + synco + + nop + nop + nop + + mov.l SCR_L_A,r0 + mov.l SCR_L_D5,r1 + synco + mov.l r1,@r0 + synco + + /* wait 200us */ + mov.l REPEAT0_R1,r3 + mov #0,r2 +repeat2: + add #1,r2 + cmp/hs r3,r2 + bf repeat2 + + synco + + mov.l MIM_L_A,r0 + mov.l MIM_L_D1,r1 + synco + mov.l r1,@r0 + synco + + rts + nop + .align 4 + +RWTCSR_D_1: .word 0xA507 +RWTCSR_D_2: .word 0xA507 +RWTCNT_D: .word 0x5A00 + +BBG_PMMR_A: .long 0xFF800010 +BBG_PMSR1_A: .long 0xFF800014 +BBG_PMSR2_A: .long 0xFF800018 +BBG_PMSR3_A: .long 0xFF80001C +BBG_PMSR4_A: .long 0xFF800020 +BBG_PMSRG_A: .long 0xFF800024 + +BBG_PMMR_D_PMSR1: .long 0xffffbffd +BBG_PMSR1_D: .long 0x00004002 +BBG_PMMR_D_PMSR2: .long 0xfc21a7ff +BBG_PMSR2_D: .long 0x03de5800 +BBG_PMMR_D_PMSR3: .long 0xfffffff8 +BBG_PMSR3_D: .long 0x00000007 +BBG_PMMR_D_PMSR4: .long 0xdffdfff9 +BBG_PMSR4_D: .long 0x20020006 +BBG_PMMR_D_PMSRG: .long 0xffffffff +BBG_PMSRG_D: .long 0x00000000 + +FRQCR_A: .long FRQCR +DLLCSR_A: .long 0xffc40010 +FRQCR_D: .long 0x40233035 +DLLCSR_D: .long 0x00000000 + +/* for DDR-SDRAM */ +MIM_U_A: .long MIM_1 +MIM_L_A: .long MIM_2 +SCR_U_A: .long SCR_1 +SCR_L_A: .long SCR_2 +STR_U_A: .long STR_1 +STR_L_A: .long STR_2 +SDR_U_A: .long SDR_1 +SDR_L_A: .long SDR_2 + +EMRS_A: .long 0xFEC02000 +MRS1_A: .long 0xFEC00B08 +MRS2_A: .long 0xFEC00308 + +MIM_U_D: .long 0x00004000 +MIM_L_D0: .long 0x03e80009 +MIM_L_D1: .long 0x03e80209 +SCR_L_D0: .long 0x3 +SCR_L_D1: .long 0x2 +SCR_L_D2: .long 0x2 +SCR_L_D3: .long 0x4 +SCR_L_D4: .long 0x4 +SCR_L_D5: .long 0x0 +STR_L_D: .long 0x000f0000 +SDR_L_D: .long 0x00000400 +EMRS_D: .long 0x0 +MRS1_D: .long 0x0 +MRS2_D: .long 0x0 + +/* Cache Controller */ +CCR_A: .long CCR +MMUCR_A: .long MMUCR +RWTCNT_A: .long WTCNT + +CCR_D: .long 0x0000090b +CCR_D_2: .long 0x00000103 +MMUCR_D: .long 0x00000004 +MSTPCR0_D: .long 0x00001001 +MSTPCR2_D: .long 0xffffffff + +/* local Bus State Controller */ +MMSELR_A: .long MMSELR +BCR_A: .long BCR +CS0BCR_A: .long CS0BCR +CS1BCR_A: .long CS1BCR +CS2BCR_A: .long CS2BCR +CS4BCR_A: .long CS4BCR +CS5BCR_A: .long CS5BCR +CS6BCR_A: .long CS6BCR +CS0WCR_A: .long CS0WCR +CS1WCR_A: .long CS1WCR +CS2WCR_A: .long CS2WCR +CS4WCR_A: .long CS4WCR +CS5WCR_A: .long CS5WCR +CS6WCR_A: .long CS6WCR +CS5PCR_A: .long CS5PCR +CS6PCR_A: .long CS6PCR + +MMSELR_D: .long 0xA5A50003 +BCR_D: .long 0x00000000 +CS0BCR_D: .long 0x77777770 +CS1BCR_D: .long 0x77777670 +CS2BCR_D: .long 0x77777770 +CS4BCR_D: .long 0x77777770 +CS5BCR_D: .long 0x77777670 +CS6BCR_D: .long 0x77777770 +CS0WCR_D: .long 0x00020006 +CS1WCR_D: .long 0x00232304 +CS2WCR_D: .long 0x7777770F +CS4WCR_D: .long 0x7777770F +CS5WCR_D: .long 0x00101006 +CS6WCR_D: .long 0x77777703 +CS5PCR_D: .long 0x77000000 +CS6PCR_D: .long 0x77000000 + +REPEAT0_R3: .long 0x00002000 +REPEAT0_R1: .long 0x0000200 diff --git a/board/r7780mp/r7780mp.c b/board/r7780mp/r7780mp.c new file mode 100644 index 0000000000..1a37711d6f --- /dev/null +++ b/board/r7780mp/r7780mp.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ide.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include "r7780mp.h" + +int checkboard(void) +{ +#if defined(CONFIG_R7780MP) + puts("BOARD: Renesas Solutions R7780MP\n"); +#else + puts("BOARD: Renesas Solutions R7780RP\n"); +#endif + return 0; +} + +int board_init(void) +{ + /* SCIF Enable */ + *(vu_short*)PHCR = 0x0000; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_SDRAM_SIZE; + printf("DRAM: %dMB\n", CFG_SDRAM_SIZE / (1024 * 1024)); + return 0; +} + +void led_set_state (unsigned short value) +{ + +} + +void ide_set_reset (int idereset) +{ + /* if reset = 1 IDE reset will be asserted */ + if (idereset){ + (*(vu_short *)FPGA_CFCTL) = 0x432; +#if defined(CONFIG_R7780MP) + (*(vu_short *)FPGA_CFPOW) |= 0x01; +#else + (*(vu_short *)FPGA_CFPOW) |= 0x02; +#endif + (*(vu_short *)FPGA_CFCDINTCLR) = 0x01; + } +} + +#if defined(CONFIG_PCI) +static struct pci_controller hose; +void pci_init_board(void) +{ + pci_sh7780_init( &hose ); +} +#endif diff --git a/board/r7780mp/r7780mp.h b/board/r7780mp/r7780mp.h new file mode 100644 index 0000000000..476a41354f --- /dev/null +++ b/board/r7780mp/r7780mp.h @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/board/r7780mp/r7780mp.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BOARD_R7780MP_R7780MP_H_ +#define _BOARD_R7780MP_R7780MP_H_ + +/* R7780MP's FPGA register map */ +#define FPGA_BASE 0xa4000000 +#define FPGA_IRLMSK (FPGA_BASE + 0x00) +#define FPGA_IRLMON (FPGA_BASE + 0x02) +#define FPGA_IRLPRI1 (FPGA_BASE + 0x04) +#define FPGA_IRLPRI2 (FPGA_BASE + 0x06) +#define FPGA_IRLPRI3 (FPGA_BASE + 0x08) +#define FPGA_IRLPRI4 (FPGA_BASE + 0x0A) +#define FPGA_RSTCTL (FPGA_BASE + 0x0C) +#define FPGA_PCIBD (FPGA_BASE + 0x0E) +#define FPGA_PCICD (FPGA_BASE + 0x10) +#define FPGA_EXTGIO (FPGA_BASE + 0x16) +#define FPGA_IVDRMON (FPGA_BASE + 0x18) +#define FPGA_IVDRCR (FPGA_BASE + 0x1A) +#define FPGA_OBLED (FPGA_BASE + 0x1C) +#define FPGA_OBSW (FPGA_BASE + 0x1E) +#define FPGA_TPCTL (FPGA_BASE + 0x100) +#define FPGA_TPDCKCTL (FPGA_BASE + 0x102) +#define FPGA_TPCLR (FPGA_BASE + 0x104) +#define FPGA_TPXPOS (FPGA_BASE + 0x106) +#define FPGA_TPYPOS (FPGA_BASE + 0x108) +#define FPGA_DBSW (FPGA_BASE + 0x200) +#define FPGA_VERSION (FPGA_BASE + 0x700) +#define FPGA_CFCTL (FPGA_BASE + 0x300) +#define FPGA_CFPOW (FPGA_BASE + 0x302) +#define FPGA_CFCDINTCLR (FPGA_BASE + 0x304) +#define FPGA_PMR (FPGA_BASE + 0x900) + +#endif /* _BOARD_R7780RP_R7780RP_H_ */ diff --git a/board/r7780mp/u-boot.lds b/board/r7780mp/u-boot.lds new file mode 100644 index 0000000000..e7499e5cd9 --- /dev/null +++ b/board/r7780mp/u-boot.lds @@ -0,0 +1,105 @@ +/* + * Copyrigth (c) 2007,2008 + * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +SECTIONS +{ + /* + Base address of internal SDRAM is 0x0C000000. + Although size of SDRAM can be either 16 or 32 MBytes, + we assume 16 MBytes (ie ignore upper half if the full + 32 MBytes is present). + + NOTE: This address must match with the definition of + TEXT_BASE in config.mk (in this directory). + + */ + . = 0x08000000 + (128*1024*1024) - (256*1024); + + PROVIDE (reloc_dst = .); + + PROVIDE (_ftext = .); + PROVIDE (_fcode = .); + PROVIDE (_start = .); + + .text : + { + cpu/sh4/start.o (.text) + . = ALIGN(8192); + common/environment.o (.ppcenv) + . = ALIGN(8192); + common/environment.o (.ppcenvr) + . = ALIGN(8192); + *(.text) + . = ALIGN(4); + } =0xFF + PROVIDE (_ecode = .); + .rodata : + { + *(.rodata) + . = ALIGN(4); + } + PROVIDE (_etext = .); + + + PROVIDE (_fdata = .); + .data : + { + *(.data) + . = ALIGN(4); + } + PROVIDE (_edata = .); + + PROVIDE (_fgot = .); + .got : + { + *(.got) + . = ALIGN(4); + } + PROVIDE (_egot = .); + + PROVIDE (__u_boot_cmd_start = .); + .u_boot_cmd : + { + *(.u_boot_cmd) + . = ALIGN(4); + } + PROVIDE (__u_boot_cmd_end = .); + + PROVIDE (reloc_dst_end = .); + /* _reloc_dst_end = .; */ + + PROVIDE (bss_start = .); + PROVIDE (__bss_start = .); + .bss : + { + *(.bss) + . = ALIGN(4); + } + PROVIDE (bss_end = .); + + PROVIDE (_end = .); +} diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index bff3cefda9..36de78d270 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -42,6 +42,30 @@ int checkcpu(void) u32 pvr = get_pvr(); u32 spridr; char buf[32]; + int i; + +#define CPU_TYPE_ENTRY(x) {#x, SPR_##x} + const struct cpu_type { + char name[15]; + u32 partid; + } cpu_type_list [] = { + CPU_TYPE_ENTRY(8311), + CPU_TYPE_ENTRY(8313), + CPU_TYPE_ENTRY(8314), + CPU_TYPE_ENTRY(8315), + CPU_TYPE_ENTRY(8321), + CPU_TYPE_ENTRY(8323), + CPU_TYPE_ENTRY(8343), + CPU_TYPE_ENTRY(8347_TBGA_), + CPU_TYPE_ENTRY(8347_PBGA_), + CPU_TYPE_ENTRY(8349), + CPU_TYPE_ENTRY(8358_TBGA_), + CPU_TYPE_ENTRY(8358_PBGA_), + CPU_TYPE_ENTRY(8360), + CPU_TYPE_ENTRY(8377), + CPU_TYPE_ENTRY(8378), + CPU_TYPE_ENTRY(8379), + }; immr = (immap_t *)CFG_IMMR; @@ -69,130 +93,26 @@ int checkcpu(void) } spridr = immr->sysconf.spridr; - switch(spridr) { - case SPR_8349E_REV10: - case SPR_8349E_REV11: - case SPR_8349E_REV31: - puts("MPC8349E, "); - break; - case SPR_8349_REV10: - case SPR_8349_REV11: - case SPR_8349_REV31: - puts("MPC8349, "); - break; - case SPR_8347E_REV10_TBGA: - case SPR_8347E_REV11_TBGA: - case SPR_8347E_REV31_TBGA: - case SPR_8347E_REV10_PBGA: - case SPR_8347E_REV11_PBGA: - case SPR_8347E_REV31_PBGA: - puts("MPC8347E, "); - break; - case SPR_8347_REV10_TBGA: - case SPR_8347_REV11_TBGA: - case SPR_8347_REV31_TBGA: - case SPR_8347_REV10_PBGA: - case SPR_8347_REV11_PBGA: - case SPR_8347_REV31_PBGA: - puts("MPC8347, "); - break; - case SPR_8343E_REV10: - case SPR_8343E_REV11: - case SPR_8343E_REV31: - puts("MPC8343E, "); - break; - case SPR_8343_REV10: - case SPR_8343_REV11: - case SPR_8343_REV31: - puts("MPC8343, "); - break; - case SPR_8360E_REV10: - case SPR_8360E_REV11: - case SPR_8360E_REV12: - case SPR_8360E_REV20: - case SPR_8360E_REV21: - puts("MPC8360E, "); - break; - case SPR_8360_REV10: - case SPR_8360_REV11: - case SPR_8360_REV12: - case SPR_8360_REV20: - case SPR_8360_REV21: - puts("MPC8360, "); - break; - case SPR_8323E_REV10: - case SPR_8323E_REV11: - puts("MPC8323E, "); - break; - case SPR_8323_REV10: - case SPR_8323_REV11: - puts("MPC8323, "); - break; - case SPR_8321E_REV10: - case SPR_8321E_REV11: - puts("MPC8321E, "); - break; - case SPR_8321_REV10: - case SPR_8321_REV11: - puts("MPC8321, "); - break; - case SPR_8311_REV10: - puts("MPC8311, "); - break; - case SPR_8311E_REV10: - puts("MPC8311E, "); - break; - case SPR_8313_REV10: - puts("MPC8313, "); - break; - case SPR_8313E_REV10: - puts("MPC8313E, "); - break; - case SPR_8315E_REV10: - puts("MPC8315E, "); - break; - case SPR_8315_REV10: - puts("MPC8315, "); - break; - case SPR_8314E_REV10: - puts("MPC8314E, "); - break; - case SPR_8314_REV10: - puts("MPC8314, "); - break; - case SPR_8379E_REV10: - puts("MPC8379E, "); - break; - case SPR_8379_REV10: - puts("MPC8379, "); - break; - case SPR_8378E_REV10: - puts("MPC8378E, "); - break; - case SPR_8378_REV10: - puts("MPC8378, "); - break; - case SPR_8377E_REV10: - puts("MPC8377E, "); - break; - case SPR_8377_REV10: - puts("MPC8377, "); - break; - default: - printf("Rev: Unknown revision number:%08x\n" - "Warning: Unsupported cpu revision!\n",spridr); - return 0; - } -#if defined(CONFIG_MPC834X) - /* Multiple revisons of 834x processors may have the same SPRIDR value. - * So use PVR to identify the revision number. - */ - printf("Rev: %02x at %s MHz", PVR_MAJ(pvr)<<4 | PVR_MIN(pvr), strmhz(buf, clock)); -#else - printf("Rev: %02x at %s MHz", spridr & 0x0000FFFF, strmhz(buf, clock)); -#endif - printf(", CSB: %4d MHz\n", gd->csb_clk / 1000000); + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) { + puts("MPC"); + puts(cpu_type_list[i].name); + if (IS_E_PROCESSOR(spridr)) + puts("E"); + if (REVID_MAJOR(spridr) >= 2) + puts("A"); + printf(", Rev: %d.%d", REVID_MAJOR(spridr), + REVID_MINOR(spridr)); + break; + } + + if (i == ARRAY_SIZE(cpu_type_list)) + printf("(SPRIDR %08x unknown), ", spridr); + + printf(" at %s MHz, ", strmhz(buf, clock)); + + printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk)); return 0; } diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 0acca47717..97ac7bb3d9 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -34,10 +34,13 @@ #include <asm/mmu.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + void board_add_ram_info(int use_default) { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile ddr83xx_t *ddr = &immap->ddr; + char buf[32]; printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1); @@ -48,9 +51,11 @@ void board_add_ram_info(int use_default) puts(", 64-bit"); if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) - puts(", ECC on)"); + puts(", ECC on"); else - puts(", ECC off)"); + puts(", ECC off"); + + printf(", %s MHz)", strmhz(buf, gd->mem_clk)); #if defined(CFG_LB_SDRAM) && defined(CFG_LBC_SDRAM_SIZE) puts("\nSDRAM: "); @@ -60,8 +65,6 @@ void board_add_ram_info(int use_default) #ifdef CONFIG_SPD_EEPROM -DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) extern void dma_init(void); extern uint dma_check(void); @@ -78,12 +81,12 @@ extern int dma_xfer(void *dest, uint count, void *src); int picos_to_clk(int picos) { - unsigned int ddr_bus_clk; + unsigned int mem_bus_clk; int clks; - ddr_bus_clk = gd->ddr_clk >> 1; - clks = picos / (1000000000 / (ddr_bus_clk / 1000)); - if (picos % (1000000000 / (ddr_bus_clk / 1000)) != 0) + mem_bus_clk = gd->mem_clk >> 1; + clks = picos / (1000000000 / (mem_bus_clk / 1000)); + if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0) clks++; return clks; @@ -313,7 +316,7 @@ long int spd_sdram() debug("DDR:Module maximum data rate is: %dMhz\n", max_data_rate); - ddrc_clk = gd->ddr_clk / 1000000; + ddrc_clk = gd->mem_clk / 1000000; effective_data_rate = 0; if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */ diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index f598699b2c..16145dd355 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -122,9 +122,9 @@ int get_clocks(void) u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; + u32 mem_clk; #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) u32 qepmf; @@ -400,11 +400,11 @@ int get_clocks(void) return -12; } - ddr_clk = csb_clk * + mem_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT)); corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT; #if defined(CONFIG_MPC8360) - ddr_sec_clk = csb_clk * (1 + + mem_sec_clk = csb_clk * (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT)); #endif @@ -466,9 +466,9 @@ int get_clocks(void) gd->enc_clk = enc_clk; gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; - gd->ddr_clk = ddr_clk; + gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) - gd->ddr_sec_clk = ddr_sec_clk; + gd->mem_sec_clk = mem_sec_clk; #endif #if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X) gd->qe_clk = qe_clk; @@ -508,9 +508,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif printf(" Local Bus Controller:%4d MHz\n", gd->lbiu_clk / 1000000); printf(" Local Bus: %4d MHz\n", gd->lclk_clk / 1000000); - printf(" DDR: %4d MHz\n", gd->ddr_clk / 1000000); + printf(" DDR: %4d MHz\n", gd->mem_clk / 1000000); #if defined(CONFIG_MPC8360) - printf(" DDR Secondary: %4d MHz\n", gd->ddr_sec_clk / 1000000); + printf(" DDR Secondary: %4d MHz\n", gd->mem_sec_clk / 1000000); #endif printf(" SEC: %4d MHz\n", gd->enc_clk / 1000000); printf(" I2C1: %4d MHz\n", gd->i2c1_clk / 1000000); diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 309eb30e8e..fdf9d35e25 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -172,8 +172,11 @@ boot_warm: /* time t 5 */ /* there and deflate the flash size back to minimal size */ /*------------------------------------------------------------*/ bl map_flash_by_law1 - lis r4, (CFG_MONITOR_BASE)@h - ori r4, r4, (CFG_MONITOR_BASE)@l + + GET_GOT /* initialize GOT access */ + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET + addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET mtlr r5 blr @@ -872,8 +875,8 @@ relocate_code: mr r10, r5 /* Save copy of Destination Address */ mr r3, r5 /* Destination Address */ - lis r4, CFG_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CFG_MONITOR_BASE@l + lwz r4, GOT(_start) + addi r4, r4, -EXC_OFF_SYS_RESET lwz r5, GOT(__init_end) sub r5, r5, r4 li r6, CFG_CACHELINE_SIZE /* Cache Line Size */ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index d990250fcb..007cb4f1ec 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -274,7 +274,7 @@ static void emac_loopback_disable(EMAC_4XX_HW_PST hw_p) static void ppc_4xx_eth_halt (struct eth_device *dev) { EMAC_4XX_HW_PST hw_p = dev->priv; - uint32_t failsafe = 10000; + u32 val = 10000; out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ @@ -290,8 +290,8 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) /* wait for reset */ while (mfdcr (malrxcasr) & (MAL_CR_MMSR >> hw_p->devnum)) { udelay (1000); /* Delay 1 MS so as not to hammer the register */ - failsafe--; - if (failsafe == 0) + val--; + if (val == 0) break; } @@ -308,6 +308,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) hw_p->print_speed = 1; /* print speed message again next time */ #endif +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) + /* don't bypass the TAHOE0/TAHOE1 cores for Linux */ + mfsdr(SDR0_ETH_CFG, val); + val &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS); + mtsdr(SDR0_ETH_CFG, val); +#endif + return; } @@ -494,11 +501,18 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) u32 zmiifer; /* ZMII0_FER reg. */ u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */ u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */ + int mode; zmiifer = 0; rmiifer = 0; rmiifer1 = 0; +#if defined(CONFIG_460EX) + mode = 9; +#else + mode = 10; +#endif + /* TODO: * NOTE: 460GT has 2 RGMII bridge cores: * emac0 ------ RGMII0_BASE @@ -520,7 +534,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) * Right now only 2*RGMII is supported. Please extend when needed. * sr - 2008-02-19 */ - switch (9) { + switch (mode) { case 1: /* 1 MII - 460EX */ /* GMC0 EMAC4_0, ZMII Bridge */ @@ -703,6 +717,11 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #ifdef CONFIG_4xx_DCACHE static u32 last_used_ea = 0; #endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ + defined(CONFIG_405EX) + int rgmii_channel; +#endif EMAC_4XX_HW_PST hw_p = dev->priv; @@ -836,10 +855,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) reg = CONFIG_PHY1_ADDR; break; #endif -#if defined (CONFIG_440GX) +#if defined (CONFIG_PHY2_ADDR) case 2: reg = CONFIG_PHY2_ADDR; break; +#endif +#if defined (CONFIG_PHY3_ADDR) case 3: reg = CONFIG_PHY3_ADDR; break; @@ -1006,12 +1027,17 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ defined(CONFIG_405EX) + if (devnum >= 2) + rgmii_channel = devnum - 2; + else + rgmii_channel = devnum; + if (speed == 1000) - reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 100) - reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V(rgmii_channel)); else if (speed == 10) - reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum)); + reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V(rgmii_channel)); else { printf("Error in RGMII Speed\n"); return -1; @@ -1131,7 +1157,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif #if defined(CONFIG_460EX) || defined(CONFIG_460GT) - mtdcr (malrxctp8r, hw_p->rx); + mtdcr (malrxctp8r, hw_p->rx_phys); /* set RX buffer size */ mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16); #else @@ -1160,6 +1186,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16); break; #endif /* CONFIG_440GX */ +#if defined (CONFIG_460GT) + case 2: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp2r, hw_p->tx_phys); + mtdcr (malrxctp16r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16); + break; + case 3: + /* setup MAL tx & rx channel pointers */ + mtdcr (maltxbattr, 0x0); + mtdcr (malrxbattr, 0x0); + mtdcr (maltxctp3r, hw_p->tx_phys); + mtdcr (malrxctp24r, hw_p->rx_phys); + /* set RX buffer size */ + mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16); + break; +#endif /* CONFIG_460GT */ case 0: default: /* setup MAL tx & rx channel pointers */ @@ -1866,14 +1912,22 @@ int ppc_4xx_eth_initialize (bd_t * bis) case 2: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet2addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x300; +#else hw_addr[eth_num] = 0x400; +#endif break; #endif #ifdef CONFIG_HAS_ETH3 case 3: memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], bis->bi_enet3addr, 6); +#if defined(CONFIG_460GT) + hw_addr[eth_num] = 0x400; +#else hw_addr[eth_num] = 0x600; +#endif break; #endif } diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 5d15e2f2a0..42eabfe568 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -99,10 +99,107 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif /* CFG_INIT_DCACHE_CS */ +#ifndef CFG_PLL_RECONFIG +#define CFG_PLL_RECONFIG 0 +#endif + +void reconfigure_pll(u32 new_cpu_freq) +{ +#if defined(CONFIG_440EPX) + int reset_needed = 0; + u32 reg, temp; + u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */ + fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */ + fbdv, target_fbdv, lfbdv, target_lfbdv, + perdv0, target_perdv0, /* CLK_PERD */ + spcid0, target_spcid0; /* CLK_SPCID */ + + /* Reconfigure clocks if necessary. + * See PPC440EPx User's Manual, sections 8.2 and 14 */ + if (new_cpu_freq == 667) { + target_prbdv0 = 2; + target_fwdva = 2; + target_fwdvb = 4; + target_fbdv = 20; + target_lfbdv = 1; + target_perdv0 = 4; + target_spcid0 = 4; + + mfcpr(clk_primbd, reg); + temp = (reg & PRBDV_MASK) >> 24; + prbdv0 = temp ? temp : 8; + if (prbdv0 != target_prbdv0) { + reg &= ~PRBDV_MASK; + reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); + mtcpr(clk_primbd, reg); + reset_needed = 1; + } + + mfcpr(clk_plld, reg); + + temp = (reg & PLLD_FWDVA_MASK) >> 16; + fwdva = temp ? temp : 16; + + temp = (reg & PLLD_FWDVB_MASK) >> 8; + fwdvb = temp ? temp : 8; + + temp = (reg & PLLD_FBDV_MASK) >> 24; + fbdv = temp ? temp : 32; + + temp = (reg & PLLD_LFBDV_MASK); + lfbdv = temp ? temp : 64; + + if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) { + reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK | + PLLD_FBDV_MASK | PLLD_LFBDV_MASK); + reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) | + ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) | + ((target_fbdv == 32 ? 0 : target_fbdv) << 24) | + (target_lfbdv == 64 ? 0 : target_lfbdv); + mtcpr(clk_plld, reg); + reset_needed = 1; + } + + mfcpr(clk_perd, reg); + perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24; + if (perdv0 != target_perdv0) { + reg &= ~CPR0_PERD_PERDV0_MASK; + reg |= (target_perdv0 << 24); + mtcpr(clk_perd, reg); + reset_needed = 1; + } + + mfcpr(clk_spcid, reg); + temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24; + spcid0 = temp ? temp : 4; + if (spcid0 != target_spcid0) { + reg &= ~CPR0_SPCID_SPCIDV0_MASK; + reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24); + mtcpr(clk_spcid, reg); + reset_needed = 1; + } + + /* Set reload inhibit so configuration will persist across + * processor resets */ + mfcpr(clk_icfg, reg); + reg &= ~CPR0_ICFG_RLI_MASK; + reg |= 1 << 31; + mtcpr(clk_icfg, reg); + } + + /* Reset processor if configuration changed */ + if (reset_needed) { + __asm__ __volatile__ ("sync; isync"); + mtspr(dbcr0, 0x20000000); + } +#endif +} + /* * Breath some life into the CPU... * - * Set up the memory map, + * Reconfigure PLL if necessary, + * set up the memory map, * initialize a bunch of registers */ void @@ -111,6 +208,7 @@ cpu_init_f (void) #if defined(CONFIG_WATCHDOG) unsigned long val; #endif + reconfigure_pll(CFG_PLL_RECONFIG); #if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE) /* @@ -135,6 +233,7 @@ cpu_init_f (void) #if defined (CFG_GPIO0_TCR) out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */ #endif +#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */ #if defined (CONFIG_405EP) /* @@ -147,7 +246,6 @@ cpu_init_f (void) */ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN); #endif /* CONFIG_405EP */ -#endif /* CONFIG_405EP */ #if defined(CFG_4xx_GPIO_TABLE) gpio_set_chip_configuration(); diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c index 60f89c97fc..e20c9ebf87 100644 --- a/cpu/ppc4xx/denali_spd_ddr2.c +++ b/cpu/ppc4xx/denali_spd_ddr2.c @@ -1093,10 +1093,10 @@ long int initdram(int board_type) program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq); - /*------------------------------------------------------------------ + /* * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia - * board SDRAM, but may be overly concervate. - *-----------------------------------------------------------------*/ + * board SDRAM, but may be overly conservative. + */ mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) | DDR0_07_TFAW_ENCODE(13) | DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) | @@ -1181,26 +1181,29 @@ long int initdram(int board_type) denali_wait_for_dlllock(); #if defined(CONFIG_DDR_DATA_EYE) - /* -----------------------------------------------------------+ - * Perform data eye search if requested. - * ----------------------------------------------------------*/ - program_tlb(0, CFG_SDRAM_BASE, dram_size, TLB_WORD2_I_ENABLE); + /* + * Map the first 1 MiB of memory in the TLB, and perform the data eye + * search. + */ + program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE); denali_core_search_data_eye(); denali_sdram_register_dump(); - remove_tlb(CFG_SDRAM_BASE, dram_size); + remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE); #endif #if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) program_tlb(0, CFG_SDRAM_BASE, dram_size, 0); sync(); - eieio(); /* Zero the memory */ debug("Zeroing SDRAM..."); - dcbz_area(CFG_SDRAM_BASE, dram_size); +#if defined(CFG_MEM_TOP_HIDE) + dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE); +#else +#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file +#endif dflush(); debug("Completed\n"); sync(); - eieio(); remove_tlb(CFG_SDRAM_BASE, dram_size); #if defined(CONFIG_DDR_ECC) @@ -1211,7 +1214,6 @@ long int initdram(int board_type) u32 val; sync(); - eieio(); /* Clear error status */ mfsdram(DDR0_00, val); mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL); @@ -1229,7 +1231,6 @@ long int initdram(int board_type) print_mcsr(); #endif sync(); - eieio(); } #endif /* defined(CONFIG_DDR_ECC) */ #endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */ diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 698bcb57d7..8620e2b484 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -218,15 +218,16 @@ static void uic_interrupt(u32 uic_base, int vec_base) } else { set_dcr(uic_base + UIC_ER, get_dcr(uic_base + UIC_ER) & - ~(0x80000000 >> vec)); + ~(0x80000000 >> (vec & 0x1f))); printf("Masking bogus interrupt vector %d" " (UIC_BASE=0x%x)\n", vec, uic_base); } /* - * After servicing the interrupt, we have to remove the status indicator. + * After servicing the interrupt, we have to remove the + * status indicator */ - set_dcr(uic_base + UIC_SR, (0x80000000 >> vec)); + set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f))); } /* diff --git a/cpu/sh4/cpu.c b/cpu/sh4/cpu.c index 0ebf95180c..d94e139815 100644 --- a/cpu/sh4/cpu.c +++ b/cpu/sh4/cpu.c @@ -24,6 +24,7 @@ #include <common.h> #include <command.h> #include <asm/processor.h> +#include <asm/cache.h> int checkcpu(void) { @@ -51,7 +52,7 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) void flush_cache (unsigned long addr, unsigned long size) { - + dcache_invalid_range( addr , addr + size ); } void icache_enable (void) diff --git a/doc/README.korat b/doc/README.korat new file mode 100644 index 0000000000..0a59f4088a --- /dev/null +++ b/doc/README.korat @@ -0,0 +1,51 @@ +The Korat board has two NOR flashes, FLASH0 and FLASH1, which are connected to +chip select 0 and 1, respectively. FLASH0 contains 16 MiB, and is mapped to +addresses 0xFF000000 - 0xFFFFFFFF as U-Boot Flash Bank #2. FLASH1 contains +from 16 to 128 MiB, and is mapped to 0xF?000000 - 0xF7FFFFFF as U-Boot Flash +Bank #1 (with the starting address depending on the flash size detected at +runtime). The write-enable pin on FLASH0 is disabled, so the contents of FLASH0 +cannot be modified in the field. This also prevents FLASH0 from executing +commands to return chip information, so its configuration is hard-coded in +U-Boot. + +There are two versions of U-Boot for Korat: "permanent" and "upgradable". The +permanent U-Boot is pre-programmed at the top of FLASH0, e.g., at addresses +0xFFFA0000 - 0xFFFFFFFF for the current 384 KiB size. The upgradable U-Boot is +located 256 KiB from the top of FLASH1, e.g. at addresses 0xF7F6000 - 0xF7FC0000 +for the current 384 KiB size. FLASH1 addresses 0xF7FE0000 - 0xF7FF0000 are +used for the U-Boot environmental parameters, and addresses 0xF7FC0000 - +0xF7FDFFFF are used for the redundant copy of the parameters. These locations +are used by both versions of U-Boot. + +On booting, the permanent U-Boot in FLASH0 begins executing. After performing +minimal setup, it monitors the state of the board's Reset switch (GPIO47). If +the switch is sensed as open before a timeout period, then U-Boot branches to +address 0xF7FBFFFC. This causes the upgradable U-Boot to execute from the +beginning. If the switch remains closed thoughout the timeout period, the +permanent U-Boot activates the on-board buzzer until the switch is sensed as +opened. It then continues to execute without branching to FLASH1. The effect +of this is that normally the Korat board boots its upgradable U-Boot, but, if +this has been corrupted, the user can boot the permanent U-Boot, which can then +be used to erase and reload FLASH1 as needed. + +Note that it is not necessary for the permanent U-Boot to have all the latest +features, but only that it have sufficient functionality (working "tftp", +"erase", "cp.b", etc.) to repair FLASH1. Also, the permanent U-Boot makes no +assumptions about the size of FLASH1 or the size of the upgradable U-Boot: it is +sufficient that the upgradable U-Boot can be started by a branch to 0xF7FBFFFC. + +The build sequence: + + make korat_config + make all perm=1 + +builds the permanent U-Boot by selecting loader file "u-boot.lds" and defining +preprocessor symbol "CONFIG_KORAT_PERMANENT". The default build: + + make korat_config + make all + +creates the upgradable U-Boot but selecting loader file "u-boot-F7FC.lds" and +leaving preprocessor symbol "CONFIG_KORAT_PERMANENT" undefined. + +2008-02-22, Larry Johnson <lrj@acm.org> diff --git a/doc/README.sh b/doc/README.sh index 075d360e90..6baee089e3 100644 --- a/doc/README.sh +++ b/doc/README.sh @@ -1,6 +1,6 @@ U-Boot for Renesas SuperH - Last update 08/10/2007 by Nobuhiro Iwamatsu + Last update 01/18/2008 by Nobuhiro Iwamatsu ================================================================================ 0. What's this? @@ -18,7 +18,19 @@ U-Boot for Renesas SuperH 2. Supported CPUs 2.1. Renesas SH7750/SH7750R + This CPU has the SH4 core. + 2.2. Renesas SH7722 + This CPU has the SH4AL-DSP core. + + 2.3. Renesas SH7720 + This CPU has the SH3 core. + + 2.4. Renesas SH7710/SH7712 + This CPU has the SH3-DSP core and Ethernet controller. + + 2.5. Renesas SH7780 + This CPU has the SH4A core. ================================================================================ 3. Supported Boards @@ -26,10 +38,42 @@ U-Boot for Renesas SuperH 3.1. Hitachi UL MS7750SE01/MS7750RSE01 Board specific code is in board/ms7750se To use this board, type "make ms7750se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA 3.2. Hitachi UL MS7722SE01 Board specific code is in board/ms7722se To use this board, type "make ms7722se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA + - SMC91x ethernet + + 3.2. Hitachi UL MS7720ERP01 + Board specific code is in board/ms7720se + To use this board, type "make ms7720se_config". + Support devices are : + - SCIF + - SDRAM + - NOR Flash + - Marubun PCMCIA + + 3.3. Renesas R7780MP + Board specific code is in board/r7780mp + To use this board, type "make r7780mp_config". + Support devices are : + - SCIF + - DDR-SDRAM + - NOR Flash + - Compact Flash + - ASIX ethernet + - SH7780 PCI bridge + - RTL8110 ethernet ** README ** In SuperH, S-record and binary of made u-boot work on the memory. @@ -49,13 +93,12 @@ U-Boot for Renesas SuperH 5. Future I plan to support the following CPUs and boards. 5.1. CPUs - - SH7710/SH7712 (SH3) - - SH7780(SH4) + - SH7751R(SH4) - SH7785(SH4) 5.2. Boards - Many boards ;-) ================================================================================ -Copyright (c) 2007 +Copyright (c) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigaur.org> diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index f04c72d05a..40fddcddad 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -239,12 +239,14 @@ static u32 flash_read32(void *addr) return __raw_readl(addr); } -static u64 flash_read64(void *addr) +static u64 __flash_read64(void *addr) { /* No architectures currently implement __raw_readq() */ return *(volatile u64 *)addr; } +u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); + /*----------------------------------------------------------------------- */ #if defined(CFG_ENV_IS_IN_FLASH) || defined(CFG_ENV_ADDR_REDUND) || (CFG_MONITOR_BASE >= CFG_FLASH_BASE) @@ -365,6 +367,20 @@ static inline uchar flash_read_uchar (flash_info_t * info, uint offset) } /*----------------------------------------------------------------------- + * read a word at a port width address, assume 16bit bus + */ +static inline ushort flash_read_word (flash_info_t * info, uint offset) +{ + ushort *addr, retval; + + addr = flash_map (info, 0, offset); + retval = flash_read16 (addr); + flash_unmap (info, 0, offset, addr); + return retval; +} + + +/*----------------------------------------------------------------------- * read a long word by picking the least significant byte of each maximum * port size word. Swap for ppc format. */ @@ -1449,17 +1465,29 @@ static void cmdset_amd_read_jedec_ids(flash_info_t *info) flash_unlock_seq(info, 0); flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID); udelay(1000); /* some flash are slow to respond */ + info->manufacturer_id = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); - if (info->device_id == 0x7E) { - /* AMD 3-byte (expanded) device ids */ - info->device_id2 = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID2); - info->device_id2 <<= 8; - info->device_id2 |= flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID3); + + switch (info->chipwidth){ + case FLASH_CFI_8BIT: + info->device_id = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID); + if (info->device_id == 0x7E) { + /* AMD 3-byte (expanded) device ids */ + info->device_id2 = flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID2); + info->device_id2 <<= 8; + info->device_id2 |= flash_read_uchar (info, + FLASH_OFFSET_DEVICE_ID3); + } + break; + case FLASH_CFI_16BIT: + info->device_id = flash_read_word (info, + FLASH_OFFSET_DEVICE_ID); + break; + default: + break; } flash_write_cmd(info, 0, 0, AMD_CMD_RESET); } diff --git a/drivers/mtd/jedec_flash.c b/drivers/mtd/jedec_flash.c index 41aad3bd6a..b958d1723a 100644 --- a/drivers/mtd/jedec_flash.c +++ b/drivers/mtd/jedec_flash.c @@ -216,6 +216,25 @@ static const struct amd_flash_info jedec_table[] = { } }, #endif +#ifdef CFG_FLASH_LEGACY_512Kx16 + { + .mfr_id = MANUFACTURER_AMD, + .dev_id = AM29LV400BB, + .name = "AMD AM29LV400BB", + .uaddr = { + [1] = MTD_UADDR_0x0555_0x02AA /* x16 */ + }, + .DevSize = SIZE_512KiB, + .CmdSet = CFI_CMDSET_AMD_LEGACY, + .NumEraseRegions= 4, + .regions = { + ERASEINFO(0x04000,1), + ERASEINFO(0x02000,2), + ERASEINFO(0x08000,1), + ERASEINFO(0x10000,7), + } + }, +#endif }; static inline void fill_info(flash_info_t *info, const struct amd_flash_info *jedec_entry, ulong base) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index fe45839466..ad1b7ddb43 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -31,6 +31,9 @@ COBJS-y += pci_auto.o COBJS-y += pci_indirect.o COBJS-y += tsi108_pci.o COBJS-y += w83c553f.o +COBJS-$(CONFIG_SH4_PCI) += pci_sh4.o +COBJS-$(CONFIG_SH7751_PCI) +=pci_sh7751.o +COBJS-$(CONFIG_SH7780_PCI) +=pci_sh7780.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c new file mode 100644 index 0000000000..1290c0a799 --- /dev/null +++ b/drivers/pci/pci_sh4.c @@ -0,0 +1,76 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/cpu/sh4/pci-sh4.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/pci.h> +#include <pci.h> + +int pci_sh4_init(struct pci_controller *hose) +{ + hose->first_busno = 0; + hose->region_count = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CONFIG_PCI_MEM_BUS, + CONFIG_PCI_MEM_PHYS, + CONFIG_PCI_MEM_SIZE, + PCI_REGION_MEM); + hose->region_count++; + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CONFIG_PCI_IO_BUS, + CONFIG_PCI_IO_PHYS, + CONFIG_PCI_IO_SIZE, + PCI_REGION_IO); + hose->region_count++; + + udelay(1000); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + pci_sh4_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + pci_sh4_write_config_dword); + + pci_register_hose(hose); + + udelay(1000); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + hose->last_busno = pci_hose_scan(hose); + return 0; +} diff --git a/drivers/pci/pci_sh7751.c b/drivers/pci/pci_sh7751.c new file mode 100644 index 0000000000..a058e1d37f --- /dev/null +++ b/drivers/pci/pci_sh7751.c @@ -0,0 +1,199 @@ +/* + * SH7751 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +/* Register addresses and such */ +#define SH7751_BCR1 (vu_long *)0xFF800000 +#define SH7751_BCR2 (vu_short*)0xFF800004 +#define SH7751_WCR1 (vu_long *)0xFF800008 +#define SH7751_WCR2 (vu_long *)0xFF80000C +#define SH7751_WCR3 (vu_long *)0xFF800010 +#define SH7751_MCR (vu_long *)0xFF800014 +#define SH7751_BCR3 (vu_short*)0xFF800050 +#define SH7751_PCICONF0 (vu_long *)0xFE200000 +#define SH7751_PCICONF1 (vu_long *)0xFE200004 +#define SH7751_PCICONF2 (vu_long *)0xFE200008 +#define SH7751_PCICONF3 (vu_long *)0xFE20000C +#define SH7751_PCICONF4 (vu_long *)0xFE200010 +#define SH7751_PCICONF5 (vu_long *)0xFE200014 +#define SH7751_PCICONF6 (vu_long *)0xFE200018 +#define SH7751_PCICR (vu_long *)0xFE200100 +#define SH7751_PCILSR0 (vu_long *)0xFE200104 +#define SH7751_PCILSR1 (vu_long *)0xFE200108 +#define SH7751_PCILAR0 (vu_long *)0xFE20010C +#define SH7751_PCILAR1 (vu_long *)0xFE200110 +#define SH7751_PCIMBR (vu_long *)0xFE2001C4 +#define SH7751_PCIIOBR (vu_long *)0xFE2001C8 +#define SH7751_PCIPINT (vu_long *)0xFE2001CC +#define SH7751_PCIPINTM (vu_long *)0xFE2001D0 +#define SH7751_PCICLKR (vu_long *)0xFE2001D4 +#define SH7751_PCIBCR1 (vu_long *)0xFE2001E0 +#define SH7751_PCIBCR2 (vu_long *)0xFE2001E4 +#define SH7751_PCIWCR1 (vu_long *)0xFE2001E8 +#define SH7751_PCIWCR2 (vu_long *)0xFE2001EC +#define SH7751_PCIWCR3 (vu_long *)0xFE2001F0 +#define SH7751_PCIMCR (vu_long *)0xFE2001F4 +#define SH7751_PCIBCR3 (vu_long *)0xFE2001F8 + +#define BCR1_BREQEN 0x00080000 +#define PCI_SH7751_ID 0x35051054 +#define PCI_SH7751R_ID 0x350E1054 +#define SH7751_PCICONF1_WCC 0x00000080 +#define SH7751_PCICONF1_PER 0x00000040 +#define SH7751_PCICONF1_BUM 0x00000004 +#define SH7751_PCICONF1_MES 0x00000002 +#define SH7751_PCICONF1_CMDS 0x000000C6 +#define SH7751_PCI_HOST_BRIDGE 0x6 +#define SH7751_PCICR_PREFIX 0xa5000000 +#define SH7751_PCICR_PRST 0x00000002 +#define SH7751_PCICR_CFIN 0x00000001 +#define SH7751_PCIPINT_D3 0x00000002 +#define SH7751_PCIPINT_D0 0x00000001 +#define SH7751_PCICLKR_PREFIX 0xa5000000 + +#define SH7751_PCI_MEM_BASE 0xFD000000 +#define SH7751_PCI_MEM_SIZE 0x01000000 +#define SH7751_PCI_IO_BASE 0xFE240000 +#define SH7751_PCI_IO_SIZE 0x00040000 + +#define SH7751_CS3_BASE_ADDR 0x0C000000 +#define SH7751_P2CS3_BASE_ADDR 0xAC000000 + +#define SH7751_PCIPAR (vu_long *)0xFE2001C0 +#define SH7751_PCIPDR (vu_long *)0xFE200220 + +#define p4_in(addr) *(addr) +#define p4_out(data,addr) *(addr) = (data) + +/* Double word */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + *value = p4_in(SH7751_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 * value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7751_PCIPAR); + p4_out(value, SH7751_PCIPDR); + + return 0; +} + +int pci_sh7751_init(struct pci_controller *hose) +{ + /* Double-check that we're a 7751 or 7751R chip */ + if (p4_in(SH7751_PCICONF0) != PCI_SH7751_ID + && p4_in(SH7751_PCICONF0) != PCI_SH7751R_ID) { + printf("PCI: Unknown PCI host bridge.\n"); + return 1; + } + printf("PCI: SH7751 PCI host bridge found.\n"); + + /* Double-check some BSC config settings */ + /* (Area 3 non-MPX 32-bit, PCI bus pins) */ + if ((p4_in(SH7751_BCR1) & 0x20008) == 0x20000) { + printf("SH7751_BCR1 0x%08X\n", p4_in(SH7751_BCR1)); + return 2; + } + if ((p4_in(SH7751_BCR2) & 0xC0) != 0xC0) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 3; + } + if (p4_in(SH7751_BCR2) & 0x01) { + printf("SH7751_BCR2 0x%08X\n", p4_in(SH7751_BCR2)); + return 4; + } + + /* Force BREQEN in BCR1 to allow PCIC access */ + p4_out((p4_in(SH7751_BCR1) | BCR1_BREQEN), SH7751_BCR1); + + /* Toggle PCI reset pin */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_PRST), SH7751_PCICR); + udelay(32); + p4_out(SH7751_PCICR_PREFIX, SH7751_PCICR); + + /* Set cmd bits: WCC, PER, BUM, MES */ + /* (Addr/Data stepping, Parity enabled, Bus Master, Memory enabled) */ + p4_out(0xfb900047, SH7751_PCICONF1); /* K.Kino */ + + /* Define this host as the host bridge */ + p4_out((SH7751_PCI_HOST_BRIDGE << 24), SH7751_PCICONF2); + + /* Force PCI clock(s) on */ + p4_out(0, SH7751_PCICLKR); + p4_out(0x03, SH7751_PCICLKR); + + /* Clear powerdown IRQs, also mask them (unused) */ + p4_out((SH7751_PCIPINT_D0 | SH7751_PCIPINT_D3), SH7751_PCIPINT); + p4_out(0, SH7751_PCIPINTM); + + p4_out(0xab000001, SH7751_PCICONF4); + + /* Set up target memory mappings (for external DMA access) */ + /* Map both P0 and P2 range to Area 3 RAM for ease of use */ + p4_out((64 - 1) << 20, SH7751_PCILSR0); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCILAR0); + p4_out(0, SH7751_PCILSR1); + p4_out(0, SH7751_PCILAR1); + p4_out(SH7751_CS3_BASE_ADDR, SH7751_PCICONF5); + p4_out(0xd0000000, SH7751_PCICONF6); + + /* Map memory window to same address on PCI bus */ + p4_out(SH7751_PCI_MEM_BASE, SH7751_PCIMBR); + + /* Map IO window to same address on PCI bus */ + p4_out(0x2000 & 0xfffc0000, SH7751_PCIIOBR); + + /* set BREQEN */ + p4_out(inl(SH7751_BCR1) | 0x00080000, SH7751_BCR1); + + /* Copy BSC registers into PCI BSC */ + p4_out(inl(SH7751_BCR1), SH7751_PCIBCR1); + p4_out(inl(SH7751_BCR2), SH7751_PCIBCR2); + p4_out(inl(SH7751_BCR3), SH7751_PCIBCR3); + p4_out(inl(SH7751_WCR1), SH7751_PCIWCR1); + p4_out(inl(SH7751_WCR2), SH7751_PCIWCR2); + p4_out(inl(SH7751_WCR3), SH7751_PCIWCR3); + p4_out(inl(SH7751_MCR), SH7751_PCIMCR); + + /* Finally, set central function init complete */ + p4_out((SH7751_PCICR_PREFIX | SH7751_PCICR_CFIN), SH7751_PCICR); + + pci_sh4_init(hose); + + return 0; +} diff --git a/drivers/pci/pci_sh7780.c b/drivers/pci/pci_sh7780.c new file mode 100644 index 0000000000..d63d67d2dc --- /dev/null +++ b/drivers/pci/pci_sh7780.c @@ -0,0 +1,107 @@ +/* + * SH7780 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <pci.h> + +#define SH7780_VENDOR_ID 0x1912 +#define SH7780_DEVICE_ID 0x0002 +#define SH7780_PCICR_PREFIX 0xA5000000 +#define SH7780_PCICR_PFCS 0x00000800 +#define SH7780_PCICR_FTO 0x00000400 +#define SH7780_PCICR_PFE 0x00000200 +#define SH7780_PCICR_TBS 0x00000100 +#define SH7780_PCICR_ARBM 0x00000040 +#define SH7780_PCICR_IOCS 0x00000004 +#define SH7780_PCICR_PRST 0x00000002 +#define SH7780_PCICR_CFIN 0x00000001 + +#define p4_in(addr) *((vu_long *)addr) +#define p4_out(data,addr) *(vu_long *)(addr) = (data) +#define p4_inw(addr) *((vu_short *)addr) +#define p4_outw(data,addr) *(vu_short *)(addr) = (data) + +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + *value = p4_in(SH7780_PCIPDR); + + return 0; +} + +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + u32 par_data = 0x80000000 | dev; + + p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); + p4_out(value, SH7780_PCIPDR); + return 0; +} + +int pci_sh7780_init(struct pci_controller *hose) +{ + p4_out(0x01, SH7780_PCIECR); + + if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID + && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){ + printf("PCI: Unknown PCI host bridge.\n"); + return; + } + printf("PCI: SH7780 PCI host bridge found.\n"); + + /* Toggle PCI reset pin */ + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR); + udelay(100000); + p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR); + p4_outw(0x0047, SH7780_PCICMD); + + p4_out(0x07F00001, SH7780_PCILSR0); + p4_out(0x08000000, SH7780_PCILAR0); + p4_out(0x00000000, SH7780_PCILSR1); + p4_out(0, SH7780_PCILAR1); + p4_out(0x08000000, SH7780_PCIMBAR0); + p4_out(0x00000000, SH7780_PCIMBAR1); + + p4_out(0xFD000000, SH7780_PCIMBR0); + p4_out(0x00FC0000, SH7780_PCIMBMR0); + + /* if use Operand Cache then enable PCICSCR Soonp bits. */ + p4_out(0x08000000, SH7780_PCICSAR0); + p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */ + + p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM + | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE), + SH7780_PCICR); + + pci_sh4_init(hose); + return 0; +} diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 70fd23ff0a..522f96d5db 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -37,39 +37,46 @@ #define SCFCR (vu_short *)(SCIF_BASE + 0x18) #define SCFDR (vu_short *)(SCIF_BASE + 0x1C) #ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ -#define SCFTDR (vu_char *)(SCIF_BASE + 0x20) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x24) +# define SCFSR (vu_short *)(SCIF_BASE + 0x14) /* SCSSR */ +# define SCFTDR (vu_char *)(SCIF_BASE + 0x20) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x24) #else -#define SCFTDR (vu_char *)(SCIF_BASE + 0xC) -#define SCFSR (vu_short *)(SCIF_BASE + 0x10) -#define SCFRDR (vu_char *)(SCIF_BASE + 0x14) +# define SCFTDR (vu_char *)(SCIF_BASE + 0xC) +# define SCFSR (vu_short *)(SCIF_BASE + 0x10) +# define SCFRDR (vu_char *)(SCIF_BASE + 0x14) #endif -#if defined(CONFIG_SH4A) -#define SCRFDR (vu_short *)(SCIF_BASE + 0x20) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x24) -#define SCLSR (vu_short *)(SCIF_BASE + 0x28) -#define SCRER (vu_short *)(SCIF_BASE + 0x2C) -#define LSR_ORER 1 -#elif defined (CONFIG_SH4) -#define SCSPTR (vu_short *)(SCIF_BASE + 0x20) -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 1 -#elif defined (CONFIG_SH3) -#ifdef CONFIG_CPU_SH7720 /* SH7720 specific */ -#define SCLSR (vu_short *)(SCIF_BASE + 0x24) -#define LSR_ORER 0x0200 -#else -#define SCLSR SCFSR /* SCSSR */ -#define LSR_ORER 1 -#endif +#if defined(CONFIG_CPU_SH7780) || \ + defined(CONFIG_CPU_SH7785) +# define SCRFDR (vu_short *)(SCIF_BASE + 0x20) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x24) +# define SCLSR (vu_short *)(SCIF_BASE + 0x28) +# define SCRER (vu_short *)(SCIF_BASE + 0x2C) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0xFF +#elif defined(CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) || \ + defined(CONFIG_CPU_SH7722) +# define SCSPTR (vu_short *)(SCIF_BASE + 0x20) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7720) +# define SCLSR (vu_short *)(SCIF_BASE + 0x24) +# define LSR_ORER 0x0200 +# define FIFOLEVEL_MASK 0x1F +#elif defined(CONFIG_CPU_SH7710) + defined(CONFIG_CPU_SH7712) +# define SCLSR SCFSR /* SCSSR */ +# define LSR_ORER 1 +# define FIFOLEVEL_MASK 0x1F #endif +/* SCBRR register value setting */ #if defined(CONFIG_CPU_SH7720) -#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) #else /* Generic SuperH */ -#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) +# define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) #endif #define SCR_RE (1 << 4) @@ -105,14 +112,13 @@ int serial_init (void) return 0; } -static int serial_tx_fifo_level (void) -{ - return (*SCFDR >> 8) & 0x1F; -} - static int serial_rx_fifo_level (void) { - return (*SCFDR >> 0) & 0x1F; +#if defined(CONFIG_SH4A) + return (*SCRFDR >> 0) & FIFOLEVEL_MASK; +#else + return (*SCFDR >> 0) & FIFOLEVEL_MASK; +#endif } void serial_raw_putc (const char c) diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index b43dba3352..9ccf7d6017 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -74,7 +74,6 @@ typedef struct global_data { u32 enc_clk; u32 lbiu_clk; u32 lclk_clk; - u32 ddr_clk; u32 pci_clk; #if defined(CONFIG_MPC837X) u32 pciexp1_clk; @@ -84,7 +83,7 @@ typedef struct global_data { u32 sata_clk; #endif #if defined(CONFIG_MPC8360) - u32 ddr_sec_clk; + u32 mem_sec_clk; #endif /* CONFIG_MPC8360 */ #endif #if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) diff --git a/include/asm-sh/cache.h b/include/asm-sh/cache.h new file mode 100644 index 0000000000..67474c7b44 --- /dev/null +++ b/include/asm-sh/cache.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H + +#if defined(CONFIG_SH4) || defined(CONFIG_SH4A) + +#define L1_CACHE_BYTES 32 +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct *)(x)) + +void dcache_wback_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + } +} + +void dcache_invalid_range(u32 start, u32 end) +{ + u32 v; + + start &= ~(L1_CACHE_BYTES-1); + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbi %0" + : /* no output */ + : "m" (__m(v))); + } +} +#endif /* CONFIG_SH4 || CONFIG_SH4A */ + +#endif /* __ASM_SH_CACHE_H */ diff --git a/include/asm-sh/cpu_sh4.h b/include/asm-sh/cpu_sh4.h index 265803956d..c200ba5a46 100644 --- a/include/asm-sh/cpu_sh4.h +++ b/include/asm-sh/cpu_sh4.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) Copyright 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,12 +30,15 @@ #define CACHE_OC_NUM_ENTRIES 512 #define CACHE_OC_ENTRY_SHIFT 5 -#if defined (CONFIG_CPU_SH7750) -#include <asm/cpu_sh7750.h> +#if defined (CONFIG_CPU_SH7750) || \ + defined(CONFIG_CPU_SH7751) +# include <asm/cpu_sh7750.h> #elif defined (CONFIG_CPU_SH7722) -#include <asm/cpu_sh7722.h> +# include <asm/cpu_sh7722.h> +#elif defined (CONFIG_CPU_SH7780) +# include <asm/cpu_sh7780.h> #else -#error "Unknown SH4 variant" +# error "Unknown SH4 variant" #endif #endif /* _ASM_CPU_SH4_H_ */ diff --git a/include/asm-sh/cpu_sh7720.h b/include/asm-sh/cpu_sh7720.h index bafb8deb19..1b393b88a6 100644 --- a/include/asm-sh/cpu_sh7720.h +++ b/include/asm-sh/cpu_sh7720.h @@ -1,5 +1,9 @@ /* - * (C) Copyright 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * Copyright 2007 (C) + * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> + * + * Copyright 2008 (C) + * Mark Jonas <mark.jonas@de.bosch.com> * * SH7720 Internal I/O register * @@ -201,6 +205,25 @@ #define PSELD (PFC_BASE + 0x2A) /* I/O Port */ +#define PORT_BASE 0xA4050100 +#define PADR (PORT_BASE + 0x40) +#define PBDR (PORT_BASE + 0x42) +#define PCDR (PORT_BASE + 0x44) +#define PDDR (PORT_BASE + 0x46) +#define PEDR (PORT_BASE + 0x48) +#define PFDR (PORT_BASE + 0x4A) +#define PGDR (PORT_BASE + 0x4C) +#define PHDR (PORT_BASE + 0x4E) +#define PJDR (PORT_BASE + 0x50) +#define PKDR (PORT_BASE + 0x52) +#define PLDR (PORT_BASE + 0x54) +#define PMDR (PORT_BASE + 0x56) +#define PPDR (PORT_BASE + 0x58) +#define PRDR (PORT_BASE + 0x5A) +#define PSDR (PORT_BASE + 0x5C) +#define PTDR (PORT_BASE + 0x5E) +#define PUDR (PORT_BASE + 0x60) +#define PVDR (PORT_BASE + 0x62) /* H-UDI */ diff --git a/include/asm-sh/cpu_sh7750.h b/include/asm-sh/cpu_sh7750.h index bb6461a6bf..3c3c30980a 100644 --- a/include/asm-sh/cpu_sh7750.h +++ b/include/asm-sh/cpu_sh7750.h @@ -25,10 +25,10 @@ #ifdef CONFIG_CPU_TYPE_R #define CACHE_OC_NUM_WAYS 2 -#define CCR_CACHE_INIT 0x8000090d /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ +#define CCR_CACHE_INIT 0x8000090D /* EMODE,ICI,ICE(16k),OCI,P1-wb,OCE(32k) */ #else #define CACHE_OC_NUM_WAYS 1 -#define CCR_CACHE_INIT 0x0000090b +#define CCR_CACHE_INIT 0x0000090B #endif /* OCN */ diff --git a/include/asm-sh/cpu_sh7780.h b/include/asm-sh/cpu_sh7780.h new file mode 100644 index 0000000000..d4f824e715 --- /dev/null +++ b/include/asm-sh/cpu_sh7780.h @@ -0,0 +1,503 @@ +#ifndef _ASM_CPU_SH7780_H_ +#define _ASM_CPU_SH7780_H_ + +/* + * Copyright (c) 2007,2008 Nobuhiro Iwamatsu + * Copyright (c) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#define CACHE_OC_NUM_WAYS 1 +#define CCR_CACHE_INIT 0x0000090b + +/* Exceptions */ +#define TRA 0xFF000020 +#define EXPEVT 0xFF000024 +#define INTEVT 0xFF000028 + +/* Memory Management Unit */ +#define PTEH 0xFF000000 +#define PTEL 0xFF000004 +#define TTB 0xFF000008 +#define TEA 0xFF00000C +#define MMUCR 0xFF000010 +#define PASCR 0xFF000070 +#define IRMCR 0xFF000078 + +/* Cache Controller */ +#define CCR 0xFF00001C +#define QACR0 0xFF000038 +#define QACR1 0xFF00003C +#define RAMCR 0xFF000074 + +/* L Memory */ +#define RAMCR 0xFF000074 +#define LSA0 0xFF000050 +#define LSA1 0xFF000054 +#define LDA0 0xFF000058 +#define LDA1 0xFF00005C + +/* Interrupt Controller */ +#define ICR0 0xFFD00000 +#define ICR1 0xFFD0001C +#define INTPRI 0xFFD00010 +#define INTREQ 0xFFD00024 +#define INTMSK0 0xFFD00044 +#define INTMSK1 0xFFD00048 +#define INTMSK2 0xFFD40080 +#define INTMSKCLR0 0xFFD00064 +#define INTMSKCLR1 0xFFD00068 +#define INTMSKCLR2 0xFFD40084 +#define NMIFCR 0xFFD000C0 +#define USERIMASK 0xFFD30000 +#define INT2PRI0 0xFFD40000 +#define INT2PRI1 0xFFD40004 +#define INT2PRI2 0xFFD40008 +#define INT2PRI3 0xFFD4000C +#define INT2PRI4 0xFFD40010 +#define INT2PRI5 0xFFD40014 +#define INT2PRI6 0xFFD40018 +#define INT2PRI7 0xFFD4001C +#define INT2A0 0xFFD40030 +#define INT2A1 0xFFD40034 +#define INT2MSKR 0xFFD40038 +#define INT2MSKCR 0xFFD4003C +#define INT2B0 0xFFD40040 +#define INT2B1 0xFFD40044 +#define INT2B2 0xFFD40048 +#define INT2B3 0xFFD4004C +#define INT2B4 0xFFD40050 +#define INT2B5 0xFFD40054 +#define INT2B6 0xFFD40058 +#define INT2B7 0xFFD4005C +#define INT2GPIC 0xFFD40090 + +/* local Bus State Controller */ +#define MMSELR 0xFF400020 +#define BCR 0xFF801000 +#define CS0BCR 0xFF802000 +#define CS1BCR 0xFF802010 +#define CS2BCR 0xFF802020 +#define CS4BCR 0xFF802040 +#define CS5BCR 0xFF802050 +#define CS6BCR 0xFF802060 +#define CS0WCR 0xFF802008 +#define CS1WCR 0xFF802018 +#define CS2WCR 0xFF802028 +#define CS4WCR 0xFF802048 +#define CS5WCR 0xFF802058 +#define CS6WCR 0xFF802068 +#define CS5PCR 0xFF802070 +#define CS6PCR 0xFF802080 + +/* DDR-SDRAM I/F */ +#define MIM_1 0xFE800008 +#define MIM_2 0xFE80000C +#define SCR_1 0xFE800010 +#define SCR_2 0xFE800014 +#define STR_1 0xFE800018 +#define STR_2 0xFE80001C +#define SDR_1 0xFE800030 +#define SDR_2 0xFE800034 +#define DBK_1 0xFE800400 +#define DBK_2 0xFE800404 + +/* PCI Controller */ +#define SH7780_PCIECR 0xFE000008 +#define SH7780_PCIVID 0xFE040000 +#define SH7780_PCIDID 0xFE040002 +#define SH7780_PCICMD 0xFE040004 +#define SH7780_PCISTATUS 0xFE040006 +#define SH7780_PCIRID 0xFE040008 +#define SH7780_PCIPIF 0xFE040009 +#define SH7780_PCISUB 0xFE04000A +#define SH7780_PCIBCC 0xFE04000B +#define SH7780_PCICLS 0xFE04000C +#define SH7780_PCILTM 0xFE04000D +#define SH7780_PCIHDR 0xFE04000E +#define SH7780_PCIBIST 0xFE04000F +#define SH7780_PCIIBAR 0xFE040010 +#define SH7780_PCIMBAR0 0xFE040014 +#define SH7780_PCIMBAR1 0xFE040018 +#define SH7780_PCISVID 0xFE04002C +#define SH7780_PCISID 0xFE04002E +#define SH7780_PCICP 0xFE040034 +#define SH7780_PCIINTLINE 0xFE04003C +#define SH7780_PCIINTPIN 0xFE04003D +#define SH7780_PCIMINGNT 0xFE04003E +#define SH7780_PCIMAXLAT 0xFE04003F +#define SH7780_PCICID 0xFE040040 +#define SH7780_PCINIP 0xFE040041 +#define SH7780_PCIPMC 0xFE040042 +#define SH7780_PCIPMCSR 0xFE040044 +#define SH7780_PCIPMCSRBSE 0xFE040046 +#define SH7780_PCI_CDD 0xFE040047 +#define SH7780_PCICR 0xFE040100 +#define SH7780_PCILSR0 0xFE040104 +#define SH7780_PCILSR1 0xFE040108 +#define SH7780_PCILAR0 0xFE04010C +#define SH7780_PCILAR1 0xFE040110 +#define SH7780_PCIIR 0xFE040114 +#define SH7780_PCIIMR 0xFE040118 +#define SH7780_PCIAIR 0xFE04011C +#define SH7780_PCICIR 0xFE040120 +#define SH7780_PCIAINT 0xFE040130 +#define SH7780_PCIAINTM 0xFE040134 +#define SH7780_PCIBMIR 0xFE040138 +#define SH7780_PCIPAR 0xFE0401C0 +#define SH7780_PCIPINT 0xFE0401CC +#define SH7780_PCIPINTM 0xFE0401D0 +#define SH7780_PCIMBR0 0xFE0401E0 +#define SH7780_PCIMBMR0 0xFE0401E4 +#define SH7780_PCIMBR1 0xFE0401E8 +#define SH7780_PCIMBMR1 0xFE0401EC +#define SH7780_PCIMBR2 0xFE0401F0 +#define SH7780_PCIMBMR2 0xFE0401F4 +#define SH7780_PCIIOBR 0xFE0401F8 +#define SH7780_PCIIOBMR 0xFE0401FC +#define SH7780_PCICSCR0 0xFE040210 +#define SH7780_PCICSCR1 0xFE040214 +#define SH7780_PCICSAR0 0xFE040218 +#define SH7780_PCICSAR1 0xFE04021C +#define SH7780_PCIPDR 0xFE040220 + +/* DMAC */ +#define DMAC_SAR0 0xFC808020 +#define DMAC_DAR0 0xFC808024 +#define DMAC_TCR0 0xFC808028 +#define DMAC_CHCR0 0xFC80802C +#define DMAC_SAR1 0xFC808030 +#define DMAC_DAR1 0xFC808034 +#define DMAC_TCR1 0xFC808038 +#define DMAC_CHCR1 0xFC80803C +#define DMAC_SAR2 0xFC808040 +#define DMAC_DAR2 0xFC808044 +#define DMAC_TCR2 0xFC808048 +#define DMAC_CHCR2 0xFC80804C +#define DMAC_SAR3 0xFC808050 +#define DMAC_DAR3 0xFC808054 +#define DMAC_TCR3 0xFC808058 +#define DMAC_CHCR3 0xFC80805C +#define DMAC_DMAOR0 0xFC808060 +#define DMAC_SAR4 0xFC808070 +#define DMAC_DAR4 0xFC808074 +#define DMAC_TCR4 0xFC808078 +#define DMAC_CHCR4 0xFC80807C +#define DMAC_SAR5 0xFC808080 +#define DMAC_DAR5 0xFC808084 +#define DMAC_TCR5 0xFC808088 +#define DMAC_CHCR5 0xFC80808C +#define DMAC_SARB0 0xFC808120 +#define DMAC_DARB0 0xFC808124 +#define DMAC_TCRB0 0xFC808128 +#define DMAC_SARB1 0xFC808130 +#define DMAC_DARB1 0xFC808134 +#define DMAC_TCRB1 0xFC808138 +#define DMAC_SARB2 0xFC808140 +#define DMAC_DARB2 0xFC808144 +#define DMAC_TCRB2 0xFC808148 +#define DMAC_SARB3 0xFC808150 +#define DMAC_DARB3 0xFC808154 +#define DMAC_TCRB3 0xFC808158 +#define DMAC_DMARS0 0xFC809000 +#define DMAC_DMARS1 0xFC809004 +#define DMAC_DMARS2 0xFC809008 +#define DMAC_SAR6 0xFC818020 +#define DMAC_DAR6 0xFC818024 +#define DMAC_TCR6 0xFC818028 +#define DMAC_CHCR6 0xFC81802C +#define DMAC_SAR7 0xFC818030 +#define DMAC_DAR7 0xFC818034 +#define DMAC_TCR7 0xFC818038 +#define DMAC_CHCR7 0xFC81803C +#define DMAC_SAR8 0xFC818040 +#define DMAC_DAR8 0xFC818044 +#define DMAC_TCR8 0xFC818048 +#define DMAC_CHCR8 0xFC81804C +#define DMAC_SAR9 0xFC818050 +#define DMAC_DAR9 0xFC818054 +#define DMAC_TCR9 0xFC818058 +#define DMAC_CHCR9 0xFC81805C +#define DMAC_DMAOR1 0xFC818060 +#define DMAC_SAR10 0xFC818070 +#define DMAC_DAR10 0xFC818074 +#define DMAC_TCR10 0xFC818078 +#define DMAC_CHCR10 0xFC81807C +#define DMAC_SAR11 0xFC818080 +#define DMAC_DAR11 0xFC818084 +#define DMAC_TCR11 0xFC818088 +#define DMAC_CHCR11 0xFC81808C +#define DMAC_SARB6 0xFC818120 +#define DMAC_DARB6 0xFC818124 +#define DMAC_TCRB6 0xFC818128 +#define DMAC_SARB7 0xFC818130 +#define DMAC_DARB7 0xFC818134 +#define DMAC_TCRB7 0xFC818138 +#define DMAC_SARB8 0xFC818140 +#define DMAC_DARB8 0xFC818144 +#define DMAC_TCRB8 0xFC818148 +#define DMAC_SARB9 0xFC818150 +#define DMAC_DARB9 0xFC818154 +#define DMAC_TCRB9 0xFC818158 + +/* Clock Pulse Generator */ +#define FRQCR 0xFFC80000 +#define PLLCR 0xFFC80024 +#define MSTPCR 0xFFC80030 + +/* Watchdog Timer and Reset */ +#define WTCNT WDTCNT +#define WDTST 0xFFCC0000 +#define WDTCSR 0xFFCC0004 +#define WDTBST 0xFFCC0008 +#define WDTCNT 0xFFCC0010 +#define WDTBCNT 0xFFCC0018 + +/* System Control */ +#define MSTPCR 0xFFC80030 + +/* Timer Unit */ +#define TSTR TSTR0 +#define TOCR 0xFFD80000 +#define TSTR0 0xFFD80004 +#define TCOR0 0xFFD80008 +#define TCNT0 0xFFD8000C +#define TCR0 0xFFD80010 +#define TCOR1 0xFFD80014 +#define TCNT1 0xFFD80018 +#define TCR1 0xFFD8001C +#define TCOR2 0xFFD80020 +#define TCNT2 0xFFD80024 +#define TCR2 0xFFD80028 +#define TCPR2 0xFFD8002C +#define TSTR1 0xFFDC0004 +#define TCOR3 0xFFDC0008 +#define TCNT3 0xFFDC000C +#define TCR3 0xFFDC0010 +#define TCOR4 0xFFDC0014 +#define TCNT4 0xFFDC0018 +#define TCR4 0xFFDC001C +#define TCOR5 0xFFDC0020 +#define TCNT5 0xFFDC0024 +#define TCR5 0xFFDC0028 + +/* Timer/Counter */ +#define CMTCFG 0xFFE30000 +#define CMTFRT 0xFFE30004 +#define CMTCTL 0xFFE30008 +#define CMTIRQS 0xFFE3000C +#define CMTCH0T 0xFFE30010 +#define CMTCH0ST 0xFFE30020 +#define CMTCH0C 0xFFE30030 +#define CMTCH1T 0xFFE30014 +#define CMTCH1ST 0xFFE30024 +#define CMTCH1C 0xFFE30034 +#define CMTCH2T 0xFFE30018 +#define CMTCH2C 0xFFE30038 +#define CMTCH3T 0xFFE3001C +#define CMTCH3C 0xFFE3003C + +/* Realtime Clock */ +#define R64CNT 0xFFE80000 +#define RSECCNT 0xFFE80004 +#define RMINCNT 0xFFE80008 +#define RHRCNT 0xFFE8000C +#define RWKCNT 0xFFE80010 +#define RDAYCNT 0xFFE80014 +#define RMONCNT 0xFFE80018 +#define RYRCNT 0xFFE8001C +#define RSECAR 0xFFE80020 +#define RMINAR 0xFFE80024 +#define RHRAR 0xFFE80028 +#define RWKAR 0xFFE8002C +#define RDAYAR 0xFFE80030 +#define RMONAR 0xFFE80034 +#define RCR1 0xFFE80038 +#define RCR2 0xFFE8003C +#define RCR3 0xFFE80050 +#define RYRAR 0xFFE80054 + +/* Serial Communication Interface with FIFO */ +#define SCIF0_BASE SCSMR0 +#define SCSMR0 0xFFE00000 +#define SCBRR0 0xFFE00004 +#define SCSCR0 0xFFE00008 +#define SCFSR0 0xFFE00010 +#define SCFCR0 0xFFE00018 +#define SCTFDR0 0xFFE0001C +#define SCRFDR0 0xFFE00020 +#define SCSPTR0 0xFFE00024 +#define SCLSR0 0xFFE00028 +#define SCRER0 0xFFE0002C +#define SCSMR1 0xFFE10000 +#define SCBRR1 0xFFE10004 +#define SCSCR1 0xFFE10008 +#define SCFSR1 0xFFE10010 +#define SCFCR1 0xFFE10018 +#define SCTFDR1 0xFFE1001C +#define SCRFDR1 0xFFE10020 +#define SCSPTR1 0xFFE10024 +#define SCLSR1 0xFFE10028 +#define SCRER1 0xFFE1002C + +/* Serial I/O with FIFO */ +#define SIMDR 0xFFE20000 +#define SISCR 0xFFE20002 +#define SITDAR 0xFFE20004 +#define SIRDAR 0xFFE20006 +#define SICDAR 0xFFE20008 +#define SICTR 0xFFE2000C +#define SIFCTR 0xFFE20010 +#define SISTR 0xFFE20014 +#define SIIER 0xFFE20016 +#define SITCR 0xFFE20028 +#define SIRCR 0xFFE2002C +#define SPICR 0xFFE20030 + +/* Serial Protocol Interface */ +#define SPCR 0xFFE50000 +#define SPSR 0xFFE50004 +#define SPSCR 0xFFE50008 +#define SPTBR 0xFFE5000C +#define SPRBR 0xFFE50010 + +/* Multimedia Card Interface */ +#define CMDR0 0xFFE60000 +#define CMDR1 0xFFE60001 +#define CMDR2 0xFFE60002 +#define CMDR3 0xFFE60003 +#define CMDR4 0xFFE60004 +#define CMDR5 0xFFE60005 +#define CMDSTRT 0xFFE60006 +#define OPCR 0xFFE6000A +#define CSTR 0xFFE6000B +#define INTCR0 0xFFE6000C +#define INTCR1 0xFFE6000D +#define INTSTR0 0xFFE6000E +#define INTSTR1 0xFFE6000F +#define CLKON 0xFFE60010 +#define CTOCR 0xFFE60011 +#define TBCR 0xFFE60014 +#define MODER 0xFFE60016 +#define CMDTYR 0xFFE60018 +#define RSPTYR 0xFFE60019 +#define TBNCR 0xFFE6001A +#define RSPR0 0xFFE60020 +#define RSPR1 0xFFE60021 +#define RSPR2 0xFFE60022 +#define RSPR3 0xFFE60023 +#define RSPR4 0xFFE60024 +#define RSPR5 0xFFE60025 +#define RSPR6 0xFFE60026 +#define RSPR7 0xFFE60027 +#define RSPR8 0xFFE60028 +#define RSPR9 0xFFE60029 +#define RSPR10 0xFFE6002A +#define RSPR11 0xFFE6002B +#define RSPR12 0xFFE6002C +#define RSPR13 0xFFE6002D +#define RSPR14 0xFFE6002E +#define RSPR15 0xFFE6002F +#define RSPR16 0xFFE60030 +#define RSPRD 0xFFE60031 +#define DTOUTR 0xFFE60032 +#define DR 0xFFE60040 +#define DMACR 0xFFE60044 +#define INTCR2 0xFFE60046 +#define INTSTR2 0xFFE60048 + +/* Audio Codec Interface */ +#define HACCR 0xFFE40008 +#define HACCSAR 0xFFE40020 +#define HACCSDR 0xFFE40024 +#define HACPCML 0xFFE40028 +#define HACPCMR 0xFFE4002C +#define HACTIER 0xFFE40050 +#define HACTSR 0xFFE40054 +#define HACRIER 0xFFE40058 +#define HACRSR 0xFFE4005C +#define HACACR 0xFFE40060 + +/* Serial Sound Interface */ +#define SSICR 0xFFE70000 +#define SSISR 0xFFE70004 +#define SSITDR 0xFFE70008 +#define SSIRDR 0xFFE7000C + +/* Flash memory Controller */ +#define FLCMNCR 0xFFE90000 +#define FLCMDCR 0xFFE90004 +#define FLCMCDR 0xFFE90008 +#define FLADR 0xFFE9000C +#define FLDATAR 0xFFE90010 +#define FLDTCNTR 0xFFE90014 +#define FLINTDMACR 0xFFE90018 +#define FLBSYTMR 0xFFE9001C +#define FLBSYCNT 0xFFE90020 +#define FLTRCR 0xFFE9002C + +/* General Purpose I/O */ +#define PACR 0xFFEA0000 +#define PBCR 0xFFEA0002 +#define PCCR 0xFFEA0004 +#define PDCR 0xFFEA0006 +#define PECR 0xFFEA0008 +#define PFCR 0xFFEA000A +#define PGCR 0xFFEA000C +#define PHCR 0xFFEA000E +#define PJCR 0xFFEA0010 +#define PKCR 0xFFEA0012 +#define PLCR 0xFFEA0014 +#define PMCR 0xFFEA0016 +#define PADR 0xFFEA0020 +#define PBDR 0xFFEA0022 +#define PCDR 0xFFEA0024 +#define PDDR 0xFFEA0026 +#define PEDR 0xFFEA0028 +#define PFDR 0xFFEA002A +#define PGDR 0xFFEA002C +#define PHDR 0xFFEA002E +#define PJDR 0xFFEA0030 +#define PKDR 0xFFEA0032 +#define PLDR 0xFFEA0034 +#define PMDR 0xFFEA0036 +#define PEPUPR 0xFFEA0048 +#define PHPUPR 0xFFEA004E +#define PJPUPR 0xFFEA0050 +#define PKPUPR 0xFFEA0052 +#define PMPUPR 0xFFEA0056 +#define PPUPR1 0xFFEA0060 +#define PPUPR2 0xFFEA0062 +#define PMSELR 0xFFEA0080 + +/* User Break Controller */ +#define CBR0 0xFF200000 +#define CRR0 0xFF200004 +#define CAR0 0xFF200008 +#define CAMR0 0xFF20000C +#define CBR1 0xFF200020 +#define CRR1 0xFF200024 +#define CAR1 0xFF200028 +#define CAMR1 0xFF20002C +#define CDR1 0xFF200030 +#define CDMR1 0xFF200034 +#define CETR1 0xFF200038 +#define CCMFR 0xFF200600 +#define CBCR 0xFF200620 + +#endif /* _ASM_CPU_SH7780_H_ */ diff --git a/include/asm-sh/pci.h b/include/asm-sh/pci.h new file mode 100644 index 0000000000..bc59491c8a --- /dev/null +++ b/include/asm-sh/pci.h @@ -0,0 +1,47 @@ +/* + * SH4 PCI Controller (PCIC) for U-Boot. + * (C) Dustin McIntire (dustin@sensoria.com) + * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * u-boot/include/asm-sh/pci.h + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_PCI_H_ +#define _ASM_PCI_H_ + +#include <pci.h> +#if defined(CONFIG_SH7751_PCI) +int pci_sh7751_init(struct pci_controller *hose); +#elif defined(CONFIG_SH7780_PCI) +int pci_sh7780_init(struct pci_controller *hose); +#else +#error "Not support PCI." +#endif + +/* PCI dword read for sh4 */ +int pci_sh4_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 *value); + +/* PCI dword write for sh4 */ +int pci_sh4_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value); + +#endif /* _ASM_PCI_H_ */ diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index bb9a35f643..388aa69c64 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,7 +2,8 @@ #define _ASM_SH_PROCESSOR_H_ #if defined CONFIG_SH3 # include <asm/cpu_sh3.h> -#elif defined (CONFIG_SH4) +#elif defined (CONFIG_SH4) || \ + defined (CONFIG_SH4A) # include <asm/cpu_sh4.h> #endif #endif diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 4fb6921ead..d54da9717b 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -157,10 +157,9 @@ */ #define CFG_MBYTES_SDRAM (1024) /* 512 MiB TODO: remove */ #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#if 0 -#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ -#endif #define CONFIG_DDR_ECC /* Use ECC when available */ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB @@ -244,9 +243,6 @@ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 100000 FFFA0000 60000\0" \ "" -#if 0 -#define CONFIG_BOOTCOMMAND "run flash_self" -#endif #define CONFIG_PREBOOT /* enable preboot variable */ @@ -264,7 +260,7 @@ int du440_phy_addr(int devnum); #define CONFIG_PHY_ADDR du440_phy_addr(0) /* PHY address */ #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_PHY_GIGE 1 /* Include GbE detection */ +#undef CONFIG_PHY_GIGE /* no GbE detection */ #define CONFIG_HAS_ETH0 #define CFG_RX_ETH_BUFFER 128 @@ -295,7 +291,9 @@ int du440_phy_addr(int devnum); #include <config_cmd_default.h> +#define CONFIG_CMD_AUTOSCRIPT #define CONFIG_CMD_BSP +#define CONFIG_CMD_BMP #define CONFIG_CMD_DATE #define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP @@ -431,8 +429,6 @@ int du440_phy_addr(int devnum); #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -#if 0 -#define CONFIG_SHOW_ACTIVITY 1 -#endif +#define CONFIG_AUTOSCRIPT 1 #endif /* __CONFIG_H */ diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index af7872628e..432fb311de 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -349,6 +349,29 @@ #define CONFIG_ETHPRIME "eTSEC1" /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index 94c4c6b040..92d7aa42b4 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -323,8 +323,11 @@ /* * Config on-board EEPROM */ -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 6 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +#define CFG_EEPROM_PAGE_WRITE_ENABLE /* * General PCI @@ -341,7 +344,7 @@ #define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */ #ifdef CONFIG_PCI - +#define CONFIG_PCI_SKIP_HOST_BRIDGE #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -549,6 +552,9 @@ #define CONFIG_HAS_ETH1 /* add support for "eth1addr" */ #define CONFIG_ETH1ADDR 00:04:9f:ef:03:02 +/* use mac_read_from_eeprom() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CFG_I2C_MAC_OFFSET 0x7f00 /* MAC address offset in I2C EEPROM */ + #define CONFIG_IPADDR 10.0.0.2 #define CONFIG_SERVERIP 10.0.0.1 #define CONFIG_GATEWAYIP 10.0.0.1 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index b307bf71ef..7c4e76e273 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -389,6 +389,34 @@ /* Options are: TSEC[0-1] */ #define CONFIG_ETHPRIME "eTSEC1" +/* SERDES */ +#define CONFIG_FSL_SERDES +#define CONFIG_FSL_SERDES1 0xe3000 +#define CONFIG_FSL_SERDES2 0xe3100 + +/* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + /* * Environment */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 90812e92a9..eaac525a35 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -416,6 +416,29 @@ #endif /* + * SATA + */ +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CFG_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CFG_SATA1_OFFSET 0x18000 +#define CFG_SATA1 (CFG_IMMR + CFG_SATA1_OFFSET) +#define CFG_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CFG_SATA2_OFFSET 0x19000 +#define CFG_SATA2 (CFG_IMMR + CFG_SATA2_OFFSET) +#define CFG_SATA2_FLAGS FLAGS_DMA + +#ifdef CONFIG_FSL_SATA +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +/* * Environment */ #ifndef CFG_RAMBOOT diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h new file mode 100644 index 0000000000..99e1179e68 --- /dev/null +++ b/include/configs/MigoR.h @@ -0,0 +1,151 @@ +/* + * Configuation settings for the Renesas Solutions Migo-R board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MIGO_R_H +#define __MIGO_R_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7722 1 +#define CONFIG_MIGO_R 1 + +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_LOADS +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_NFS +#define CONFIG_CMD_DFL +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_ENV + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01" +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.10.100 +#define CONFIG_SERVERIP 192.168.10.77 +#define CONFIG_GATEWAYIP 192.168.10.77 + +#define CONFIG_VERSION_VARIABLE +#undef CONFIG_SHOW_BOOT_PROGRESS + +/* SMC9111 */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE (0xB0000000) + +/* MEMORY */ +#define MIGO_R_SDRAM_BASE (0x8C000000) +#define MIGO_R_FLASH_BASE_1 (0xA0000000) +#define MIGO_R_FLASH_BANK_SIZE (64 * 1024 * 1024) + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 +#undef CFG_CONSOLE_INFO_QUIET /* Suppress display of console + information at boot */ +#undef CFG_CONSOLE_OVERWRITE_ROUTINE +#undef CFG_CONSOLE_ENV_OVERWRITE + +#define CFG_MEMTEST_START (MIGO_R_SDRAM_BASE) +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Enable alternate, more extensive, memory test */ +#undef CFG_ALT_MEMTEST +/* Scratch address used by the alternate memory test */ +#undef CFG_MEMTEST_SCRATCH + +/* Enable temporary baudrate change while serial download */ +#undef CFG_LOADS_BAUD_CHANGE + +#define CFG_SDRAM_BASE (MIGO_R_SDRAM_BASE) +/* maybe more, but if so u-boot doesn't know about it... */ +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +/* default load address for scripts ?!? */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 16 * 1024 * 1024) + +/* Address of u-boot image in Flash (NOT run time address in SDRAM) ?!? */ +#define CFG_MONITOR_BASE (MIGO_R_FLASH_BASE_1) +/* Monitor size */ +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* FLASH */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO +/* Physical start address of Flash memory */ +#define CFG_FLASH_BASE (MIGO_R_FLASH_BASE_1) +/* Max number of sectors on each Flash chip */ +#define CFG_MAX_FLASH_SECT 512 + +/* if you use all NOR Flash , you change dip-switch. Please see MIGO_R01 Manual. */ +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE + (0 * MIGO_R_FLASH_BANK_SIZE) } + +/* Timeout for Flash erase operations (in ms) */ +#define CFG_FLASH_ERASE_TOUT (3 * 1000) +/* Timeout for Flash write operations (in ms) */ +#define CFG_FLASH_WRITE_TOUT (3 * 1000) +/* Timeout for Flash set sector lock bit operations (in ms) */ +#define CFG_FLASH_LOCK_TOUT (3 * 1000) +/* Timeout for Flash clear lock bit operations (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT (3 * 1000) + +/* Use hardware flash sectors protection instead of U-Boot software protection */ +#undef CFG_FLASH_PROTECTION +#undef CFG_DIRECT_FLASH_TFTP + +/* ENV setting */ +#define CFG_ENV_IS_IN_FLASH +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Offset of env Flash sector relative to CFG_FLASH_BASE */ +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SECT_SIZE) + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +#endif /* __MIGO_R_H */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index 38fb7c6c78..3e906c4251 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006-2007 + * (C) Copyright 2006-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -35,6 +35,7 @@ #define CONFIG_LAST_STAGE_INIT 1 /* call last_stage_init() */ #undef CFG_DRAM_TEST /* Disable-takes long time! */ #define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define CONFIG_4xx_DCACHE /* Enable i- and d-cache */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -144,6 +145,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth3\0" \ "hostname=alpr\0" \ + "fdt_file=alpr/alpr.dtb\0" \ + "fdt_addr=400000\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath} ${init}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -158,6 +161,10 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ + "net_nfs_fdt=tftp 200000 ${bootfile};" \ + "tftp ${fdt_addr} ${fdt_file};" \ + "run nfsargs addip addtty;" \ + "bootm 200000 - ${fdt_addr}\0" \ "rootpath=/opt/projects/alpr/nfs_root\0" \ "bootfile=/alpr/uImage\0" \ "kernel_addr=fff00000\0" \ @@ -370,4 +377,9 @@ #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + #endif /* __CONFIG_H */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index a4bcc655ee..a1c6674b1a 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -27,16 +27,21 @@ /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ -#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */ +/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */ +#ifndef CONFIG_CANYONLANDS +#define CONFIG_460GT 1 /* Specific PPC460GT */ +#else +#define CONFIG_460EX 1 /* Specific PPC460EX */ +#endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_460EX 1 /* Specific PPC460EX support */ #define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_BOARD_TYPES 1 /* support board types */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the @@ -262,8 +267,15 @@ #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */ #define CONFIG_PHY1_ADDR 1 -#define CONFIG_HAS_ETH0 1 -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +/* Only Glacier (460GT) has 4 EMAC interfaces */ +#ifdef CONFIG_460GT +#define CONFIG_PHY2_ADDR 2 +#define CONFIG_PHY3_ADDR 3 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#endif #define CONFIG_NET_MULTI 1 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */ @@ -275,6 +287,8 @@ /*----------------------------------------------------------------------- * USB-OHCI *----------------------------------------------------------------------*/ +/* Only Canyonlands (460EX) has USB */ +#ifdef CONFIG_460EX #define CONFIG_USB_OHCI_NEW #define CONFIG_USB_STORAGE #undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */ @@ -283,6 +297,7 @@ #define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000) #define CFG_USB_OHCI_SLOT_NAME "ppc440" #define CFG_USB_OHCI_MAX_ROOT_PORTS 15 +#endif /*----------------------------------------------------------------------- * Default environment @@ -293,9 +308,21 @@ #undef CONFIG_BOOTARGS +/* Setup some board specific values for the default environment variables */ +#ifdef CONFIG_CANYONLANDS +#define CONFIG_HOSTNAME canyonlands +#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0" +#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0" +#else +#define CONFIG_HOSTNAME glacier +#define CFG_BOOTFILE "bootfile=glacier/uImage\0" +#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ + CFG_BOOTFILE \ + CFG_DTBFILE \ "netdev=eth0\0" \ - "hostname=canyonlands\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ @@ -315,18 +342,16 @@ "flash_self=run ramargs addip addtty;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "bootfile=canyonlands/uImage\0" \ - "fdt_file=canyonlands/canyonlands.dtb\0" \ "fdt_addr=400000\0" \ "kernel_addr=fc000000\0" \ "ramdisk_addr=fc200000\0" \ "initrd_high=30000000\0" \ - "load=tftp 200000 canyonlands/u-boot.bin\0" \ + "load=tftp 200000 ${hostname}/u-boot.bin\0" \ "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \ "cp.b ${fileaddr} fffa0000 ${filesize};" \ "setenv filesize;saveenv\0" \ "upd=run load update\0" \ - "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \ + "nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \ "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ "setenv filesize;saveenv\0" \ "nupd=run nload nupdate\0" \ @@ -361,8 +386,6 @@ #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IRQ #define CONFIG_CMD_MII @@ -373,7 +396,11 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO #define CONFIG_CMD_SDRAM +#ifdef CONFIG_460EX +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB +#endif /* Partitions */ #define CONFIG_MAC_PARTITION @@ -487,6 +514,8 @@ /* * PPC4xx GPIO Configuration */ +#ifdef CONFIG_460EX +/* 460EX: Use USB configuration */ #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ { \ /* GPIO Core 0 */ \ @@ -559,6 +588,81 @@ {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ } \ } +#else +/* 460GT: Use EMAC2+3 configuration */ +#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \ +{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \ +{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \ +{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \ +{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ +{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/korat.h b/include/configs/korat.h index dcec9b039d..48d73ac376 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -45,10 +45,10 @@ * Manufacturer's information serial EEPROM parameters */ #define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ -#define MAN_SERIAL_NO_FIELD 2 -#define MAN_SERIAL_NO_LENGTH 13 +#define MAN_INFO_FIELD 2 +#define MAN_INFO_LENGTH 9 #define MAN_MAC_ADDR_FIELD 3 -#define MAN_MAC_ADDR_LENGTH 17 +#define MAN_MAC_ADDR_LENGTH 12 /* * Base addresses -- Note these are effective addresses where the actual @@ -57,17 +57,18 @@ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ -#define CFG_BOOT_BASE_ADDR 0xf0000000 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_FLASH0_SIZE 0x01000000 +#define CFG_FLASH0_ADDR (-CFG_FLASH0_SIZE) +#define CFG_FLASH1_TOP 0xF8000000 +#define CFG_FLASH1_MAX_SIZE 0x08000000 +#define CFG_FLASH1_ADDR (CFG_FLASH1_TOP - CFG_FLASH1_MAX_SIZE) +#define CFG_FLASH_BASE CFG_FLASH1_ADDR /* start of FLASH */ #define CFG_MONITOR_BASE TEXT_BASE #define CFG_OCM_BASE 0xe0010000 /* ocm */ #define CFG_OCM_DATA_ADDR CFG_OCM_BASE #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 -#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 -#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 /* Don't change either of these */ #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ @@ -108,13 +109,14 @@ /* * FLASH related */ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CONFIG_FLASH_CFI_LEGACY /* Allow hard-coded config for FLASH0 */ -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_BANKS_LIST { CFG_FLASH1_ADDR, CFG_FLASH0_ADDR } -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ @@ -126,12 +128,12 @@ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ -/* Address and size of Redundant Environment Sector */ -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE /* * DDR SDRAM @@ -144,6 +146,8 @@ #define SPD_EEPROM_ADDRESS {0x50} #define CONFIG_PROG_SDRAM_TLB #define CFG_DRAM_TEST +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -180,6 +184,7 @@ #define CFG_BOOTFILE "bootfile=/tftpboot/korat/uImage\0" #define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0" +/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */ #define CONFIG_EXTRA_ENV_SETTINGS \ CFG_BOOTFILE \ CFG_ROOTPATH \ @@ -197,8 +202,8 @@ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ "bootm\0" \ - "kernel_addr=FC000000\0" \ - "ramdisk_addr=FC180000\0" \ + "kernel_addr=F4000000\0" \ + "ramdisk_addr=F4400000\0" \ "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ "cp.b 200000 FFFA0000 60000\0" \ @@ -216,7 +221,7 @@ #define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ #define CONFIG_PHY_DYNAMIC_ANEG 1 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#undef CONFIG_PHY_RESET /* Don't do software PHY reset */ #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ #define CONFIG_HAS_ETH0 @@ -322,6 +327,11 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ /* + * Korat-specific options + */ +#define CFG_KORAT_MAN_RESET_MS 10000 /* timeout for manufacturer reset */ + +/* * PCI stuff */ /* General PCI */ @@ -350,12 +360,23 @@ */ /* Memory Bank 0 (NOR-FLASH) initialization */ +#if CFG_FLASH0_SIZE == 0x01000000 +#define CFG_EBC_PB0AP 0x04017300 +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x0009A000) +#elif CFG_FLASH0_SIZE == 0x04000000 #define CFG_EBC_PB0AP 0x04017300 -#define CFG_EBC_PB0CR (CFG_FLASH_BASE | 0x000DA000) +#define CFG_EBC_PB0CR (CFG_FLASH0_ADDR | 0x000DA000) +#else +#error Unable to configure chip select for current CFG_FLASH0_SIZE +#endif /* Memory Bank 1 (NOR-FLASH) initialization */ +#if CFG_FLASH1_MAX_SIZE == 0x08000000 #define CFG_EBC_PB1AP 0x04017300 -#define CFG_EBC_PB1CR (0xF8000000 | 0x000DA000) +#define CFG_EBC_PB1CR (CFG_FLASH1_ADDR | 0x000FA000) +#else +#error Unable to configure chip select for current CFG_FLASH1_MAX_SIZE +#endif /* Memory Bank 2 (CPLD) initialization */ #define CFG_EBC_PB2AP 0x04017300 @@ -426,6 +447,7 @@ * GPIO63 xxxx x x (reserved for trace port) */ +#define CFG_GPIO_ATMEGA_RESET_ 12 #define CFG_GPIO_ATMEGA_SS_ 13 #define CFG_GPIO_PHY0_FIBER_SEL 27 #define CFG_GPIO_PHY1_FIBER_SEL 28 @@ -435,6 +457,7 @@ #define CFG_GPIO_SFP1_TX_EN_ 33 #define CFG_GPIO_PHY0_EN 45 #define CFG_GPIO_PHY1_EN 46 +#define CFG_GPIO_RESET_PRESSED_ 47 /* * PPC440 GPIO Configuration diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index ced7ba6f05..4398b87ae1 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2008 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -86,6 +86,8 @@ #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6) /* unused GPT0 COMP reg */ +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* Additional registers for watchdog timer post test */ @@ -149,12 +151,8 @@ #define CFG_MBYTES_SDRAM (256) /* 256MB */ #define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */ #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */ -#if 0 /* test-only: disable ECC for now */ #define CONFIG_DDR_ECC 1 /* enable ECC */ #define CFG_POST_ECC_ON CFG_POST_ECC -#else -#define CFG_POST_ECC_ON 0 -#endif /* POST support */ #define CONFIG_POST (CFG_POST_CACHE | \ diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h new file mode 100644 index 0000000000..0fc0b970db --- /dev/null +++ b/include/configs/mpr2.h @@ -0,0 +1,92 @@ +/* + * Configuation settings for MPR2 + * + * Copyright (C) 2008 + * Mark Jonas <mark.jonas@de.bosch.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MPR2_H +#define __MPR2_H + +/* Supported commands */ +#define CONFIG_CMD_ENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_FLASH + +/* Default environment variables */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_BOOTFILE /boot/zImage +#define CONFIG_LOADADDR 0x8E000000 +#define CONFIG_VERSION_VARIABLE + +/* CPU and platform */ +#define CONFIG_SH 1 +#define CONFIG_SH3 1 +#define CONFIG_CPU_SH7720 1 +#define CONFIG_MPR2 1 + +/* U-Boot internals */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Buffer size for input from the Console */ +#define CFG_PBSIZE 256 /* Buffer size for Console output */ +#define CFG_MAXARGS 16 /* max args accepted for monitor commands */ +#define CFG_BARGSIZE 512 /* Buffer size for Boot Arguments passed to kernel */ +#define CFG_BAUDRATE_TABLE { 115200 } /* List of legal baudrate settings for this board */ +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (128 * 1024) +#define CFG_MALLOC_LEN (256 * 1024) +#define CFG_GBL_DATA_SIZE 256 + +/* Memory */ +#define CFG_SDRAM_BASE 0x8C000000 +#define CFG_SDRAM_SIZE (64 * 1024 * 1024) +#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_END (CFG_MEMTEST_START + (60 * 1024 * 1024)) + +/* Flash */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_BASE 0xA0000000 +#define CFG_MAX_FLASH_SECT 256 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (128 * 1024) +#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Clocks */ +#define CONFIG_SYS_CLK_FREQ 24000000 +#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */ +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* UART */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_CONS_SCIF0 1 + +#endif /* __MPR2_H */ diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h new file mode 100644 index 0000000000..c20bacad22 --- /dev/null +++ b/include/configs/r2dplus.h @@ -0,0 +1,150 @@ +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef DEBUG + +#define CONFIG_SH 1 +#define CONFIG_SH4 1 +#define CONFIG_CPU_SH7751 1 +#define CONFIG_CPU_SH_TYPE_R 1 +#define CONFIG_R2DPLUS 1 +#define __LITTLE_ENDIAN__ 1 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DFL +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +/* SCIF */ +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF1 1 +#define BOARD_LATE_INIT 1 + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.51 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +/* SDRAM */ +#define CFG_SDRAM_BASE (0x8C000000) +#define CFG_SDRAM_SIZE (0x04000000) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 32 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (128 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) + +/* + * NOR Flash + */ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER + +#if defined(CONFIG_R2DPLUS_OLD) +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_MAX_FLASH_BANKS (1) /* Max number of + * Flash memory banks + */ +#define CFG_MAX_FLASH_SECT 142 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#else /* CONFIG_R2DPLUS_OLD */ + +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH 0x04 /* 32bit */ +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } +#endif /* CONFIG_R2DPLUS_OLD */ + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* + * SuperH Clock setting + */ +#define CONFIG_SYS_CLK_FREQ 60000000 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) +#define CFG_PLL_SETTLING_TIME 100/* in us */ + +/* + * IDE support + */ +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ + +/* + * SuperH PCI Bridge Configration + */ +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7751_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ +#define CONFIG_PCI_IO_BUS 0xFE240000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00040000 /* Size of IO window */ + +/* + * Network device (RTL8139) support + */ +#define CONFIG_NET_MULTI +#define CONFIG_RTL8139 +#define _IO_BASE 0x00000000 +#define KSEG1ADDR(x) (x) + +#endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h new file mode 100644 index 0000000000..42787f4fd1 --- /dev/null +++ b/include/configs/r7780mp.h @@ -0,0 +1,165 @@ +/* + * Configuation settings for the Renesas R7780MP board + * + * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __R7780RP_H +#define __R7780RP_H + +#undef DEBUG +#define CONFIG_SH 1 +#define CONFIG_SH4A 1 +#define CONFIG_CPU_SH7780 1 +#define CONFIG_R7780MP 1 +#define __LITTLE_ENDIAN 1 + +/* + * Command line configuration. + */ +#define CONFIG_CMD_SDRAM +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_ENV +#define CONFIG_CMD_NFS +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 +#define CONFIG_DOS_PARTITION + +#define CFG_SCIF_CONSOLE 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_SCIF0 1 + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySC0,115200" +#define CONFIG_ENV_OVERWRITE 1 + +/* check for keypress on bootdelay==0 */ +/*#define CONFIG_ZERO_BOOTDELAY_CHECK*/ + +/* Network setting */ +#define CONFIG_NETMASK 255.0.0.0 +#define CONFIG_IPADDR 10.0.192.82 +#define CONFIG_SERVERIP 10.0.0.1 +#define CONFIG_GATEWAYIP 10.0.0.1 + +#define CFG_SDRAM_BASE (0x08000000) +#define CFG_SDRAM_SIZE (128 * 1024 * 1024) + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE 256 +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE 512 +/* List of legal baudrate settings for this board */ +#define CFG_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } + +#define CFG_MEMTEST_START (CFG_SDRAM_BASE) +#define CFG_MEMTEST_END (TEXT_BASE - 0x100000) + +/* NOR Flash (S29PL127J60TFI130) */ +#define CFG_FLASH_BASE (0xA0000000) +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT +#define CFG_MAX_FLASH_BANKS (2) +#define CFG_MAX_FLASH_SECT 270 +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE,\ + CFG_FLASH_BASE + 0x100000,\ + CFG_FLASH_BASE + 0x400000,\ + CFG_FLASH_BASE + 0x700000, } + +#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 4 * 1024 * 1024) +/* Address of u-boot image in Flash */ +#define CFG_MONITOR_BASE (CFG_FLASH_BASE) +#define CFG_MONITOR_LEN (112 * 1024) +/* Size of DRAM reserved for malloc() use */ +#define CFG_MALLOC_LEN (256 * 1024) + +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE (256) +#define CFG_BOOTMAPSZ (8 * 1024 * 1024) +#define CFG_RX_ETH_BUFFER (8) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#undef CFG_FLASH_CFI_BROKEN_TABLE +#undef CFG_FLASH_QUIET_TEST +/* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_EMPTY_INFO + +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE (16 * 1024) +#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +/* Board Clock */ +#define CONFIG_SYS_CLK_FREQ 33333333 +#define TMU_CLK_DIVIDER 4 +#define CFG_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER) + +/* PCI Controller */ +#if defined(CONFIG_CMD_PCI) +#define CONFIG_PCI +#define CONFIG_SH4_PCI +#define CONFIG_SH7780_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW 1 +#define __io +#define __mem_pci + +#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */ +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */ + +#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */ +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */ +#endif /* CONFIG_CMD_PCI */ + +#if defined(CONFIG_CMD_NET) +/* #define CONFIG_NET_MULTI + #define CONFIG_RTL8169 */ +/* AX88696L Support(NE2000 base chip) */ +#define CONFIG_DRIVER_NE2000 +#define CONFIG_DRIVER_AX88796L +#define CONFIG_DRIVER_NE2000_BASE 0xA4100000 +#endif + +/* Compact flash Support */ +#if defined(CONFIG_CMD_IDE) +#define CONFIG_IDE_RESET 1 +#define CFG_PIO_MODE 1 +#define CFG_IDE_MAXBUS 1 /* IDE bus */ +#define CFG_IDE_MAXDEVICE 1 +#define CFG_ATA_BASE_ADDR 0xb4000000 +#define CFG_ATA_STRIDE 2 /* 1bit shift */ +#define CFG_ATA_DATA_OFFSET 0x1000 /* data reg offset */ +#define CFG_ATA_REG_OFFSET 0x1000 /* reg offset */ +#define CFG_ATA_ALT_OFFSET 0x800 /* alternate register offset */ +#endif /* CONFIG_CMD_IDE */ + +#endif /* __R7780RP_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index dfa8779bcc..555316ff63 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -221,6 +221,8 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ #endif +#define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */ + /* 440EPx errata CHIP 11 */ /* * I2C @@ -275,7 +277,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ "flash_nfs=run nfsargs addip addtty addmisc;" \ "bootm ${kernel_addr}\0" \ "flash_self=run ramargs addip addtty addmisc;" \ diff --git a/include/linux/stat.h b/include/linux/stat.h index 37f2924df1..2ce1c25ac3 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -126,7 +126,7 @@ struct stat { #endif /* __MIPS__ */ -#if defined(__AVR32__) +#if defined(__AVR32__) || defined(__SH__) struct stat { unsigned long st_dev; @@ -149,7 +149,7 @@ struct stat { unsigned long __unused5; }; -#endif /* __AVR32__ */ +#endif /* __AVR32__ || __SH__ */ #ifdef __cplusplus } diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 4ee38aafa9..d2e1e2bb6c 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -48,71 +48,36 @@ /* SPRIDR - System Part and Revision ID Register */ -#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */ -#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */ - -#define SPR_8349E_REV10 0x80300100 -#define SPR_8349_REV10 0x80310100 -#define SPR_8347E_REV10_TBGA 0x80320100 -#define SPR_8347_REV10_TBGA 0x80330100 -#define SPR_8347E_REV10_PBGA 0x80340100 -#define SPR_8347_REV10_PBGA 0x80350100 -#define SPR_8343E_REV10 0x80360100 -#define SPR_8343_REV10 0x80370100 - -#define SPR_8349E_REV11 0x80300101 -#define SPR_8349_REV11 0x80310101 -#define SPR_8347E_REV11_TBGA 0x80320101 -#define SPR_8347_REV11_TBGA 0x80330101 -#define SPR_8347E_REV11_PBGA 0x80340101 -#define SPR_8347_REV11_PBGA 0x80350101 -#define SPR_8343E_REV11 0x80360101 -#define SPR_8343_REV11 0x80370101 - -#define SPR_8349E_REV31 0x80300300 -#define SPR_8349_REV31 0x80310300 -#define SPR_8347E_REV31_TBGA 0x80320300 -#define SPR_8347_REV31_TBGA 0x80330300 -#define SPR_8347E_REV31_PBGA 0x80340300 -#define SPR_8347_REV31_PBGA 0x80350300 -#define SPR_8343E_REV31 0x80360300 -#define SPR_8343_REV31 0x80370300 - -#define SPR_8360E_REV10 0x80480010 -#define SPR_8360_REV10 0x80490010 -#define SPR_8360E_REV11 0x80480011 -#define SPR_8360_REV11 0x80490011 -#define SPR_8360E_REV12 0x80480012 -#define SPR_8360_REV12 0x80490012 -#define SPR_8360E_REV20 0x80480020 -#define SPR_8360_REV20 0x80490020 -#define SPR_8360E_REV21 0x80480021 -#define SPR_8360_REV21 0x80490021 - -#define SPR_8323E_REV10 0x80620010 -#define SPR_8323_REV10 0x80630010 -#define SPR_8321E_REV10 0x80660010 -#define SPR_8321_REV10 0x80670010 -#define SPR_8323E_REV11 0x80620011 -#define SPR_8323_REV11 0x80630011 -#define SPR_8321E_REV11 0x80660011 -#define SPR_8321_REV11 0x80670011 - -#define SPR_8313E_REV10 0x80B00010 -#define SPR_8313_REV10 0x80B10010 -#define SPR_8311E_REV10 0x80B20010 -#define SPR_8311_REV10 0x80B30010 -#define SPR_8315E_REV10 0x80B40010 -#define SPR_8315_REV10 0x80B50010 -#define SPR_8314E_REV10 0x80B60010 -#define SPR_8314_REV10 0x80B70010 - -#define SPR_8379E_REV10 0x80C20010 -#define SPR_8379_REV10 0x80C30010 -#define SPR_8378E_REV10 0x80C40010 -#define SPR_8378_REV10 0x80C50010 -#define SPR_8377E_REV10 0x80C60010 -#define SPR_8377_REV10 0x80C70010 +#define SPRIDR_PARTID 0xFFFF0000 /* Part Id */ +#define SPRIDR_REVID 0x0000FFFF /* Revision Id */ + +#if defined(CONFIG_MPC834X) +#define REVID_MAJOR(spridr) ((spridr & 0x0000FF00) >> 8) +#define REVID_MINOR(spridr) (spridr & 0x000000FF) +#else +#define REVID_MAJOR(spridr) ((spridr & 0x000000F0) >> 4) +#define REVID_MINOR(spridr) (spridr & 0x0000000F) +#endif + +#define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ + +#define SPR_8311 0x80B2 +#define SPR_8313 0x80B0 +#define SPR_8314 0x80B6 +#define SPR_8315 0x80B4 +#define SPR_8321 0x8066 +#define SPR_8323 0x8062 +#define SPR_8343 0x8036 +#define SPR_8347_TBGA_ 0x8032 +#define SPR_8347_PBGA_ 0x8034 +#define SPR_8349 0x8030 +#define SPR_8358_TBGA_ 0x804A +#define SPR_8358_PBGA_ 0x804E +#define SPR_8360 0x8048 +#define SPR_8377 0x80C6 +#define SPR_8378 0x80C4 +#define SPR_8379 0x80C2 /* SPCR - System Priority Configuration Register */ diff --git a/include/ppc440.h b/include/ppc440.h index 10517cbb65..642d1ded76 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -2023,9 +2023,13 @@ #define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */ #define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */ #define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */ +#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */ +#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */ #define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */ #define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */ #define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */ +#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */ +#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ #endif /* CONFIG_440GX */ diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index 02084546b2..89ff26f991 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -213,6 +213,10 @@ typedef struct emac_4xx_hw_st { #define RGMII_FER (RGMII_BASE + 0x00) #define RGMII_SSR (RGMII_BASE + 0x04) +#if defined(CONFIG_460GT) +#define RGMII1_BASE_OFFSET 0x100 +#endif + /* RGMII Function Enable (FER) Register Bit Definitions */ /* Note: for EMAC 2 and 3 only, 440GX only */ #define RGMII_FER_DIS (0x00) diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 30383027c7..7d33914492 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -120,6 +120,11 @@ DECLARE_GLOBAL_DATA_PTR; #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN #endif +#if !defined(CFG_MEM_TOP_HIDE) +#define CFG_MEM_TOP_HIDE 0 +#endif + +extern ulong _start; extern ulong __init_end; extern ulong _end; ulong monitor_flash_len; @@ -428,13 +433,26 @@ void board_init_f (ulong bootflag) * relocate the code and continue running from DRAM. * * Reserve memory at end of RAM for (top down in that order): + * - area that won't get touched by U-Boot and Linux (optional) * - kernel log buffer * - protected RAM * - LCD framebuffer * - monitor code * - board info struct */ - len = (ulong)&_end - CFG_MONITOR_BASE; + len = (ulong)&_end - (ulong)&_start + EXC_OFF_SYS_RESET; + + /* + * Subtract specified amount of memory to hide so that it won't + * get "touched" at all by U-Boot. By fixing up gd->ram_size + * the Linux kernel should now get passed the now "corrected" + * memory size and won't touch it either. This should work + * for arch/ppc and arch/powerpc. Only Linux board ports in + * arch/powerpc with bootwrapper support, that recalculate the + * memory size from the SDRAM controller setup will have to + * get fixed. + */ + gd->ram_size -= CFG_MEM_TOP_HIDE; #ifndef CONFIG_MAX_MEM_MAPPED #define CONFIG_MAX_MEM_MAPPED (256 << 20) @@ -876,7 +894,7 @@ void board_init_r (gd_t *id, ulong dest_addr) sc3_read_eeprom(); #endif -#ifdef CFG_ID_EEPROM +#if defined (CFG_ID_EEPROM) || defined (CFG_I2C_MAC_OFFSET) mac_read_from_eeprom(); #endif diff --git a/lib_sh/board.c b/lib_sh/board.c index 2cd60d76be..883c381e64 100644 --- a/lib_sh/board.c +++ b/lib_sh/board.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 + * Copyright (C) 2007,2008 * Nobuhiro Iwamatsu <iwamatsu@nigauri.org> * * This program is free software; you can redistribute it and/or @@ -95,6 +95,14 @@ static int sh_marubun_init(void) } #endif /* (CONFIG_CMD_IDE) */ +#if defined(CONFIG_PCI) +static int sh_pci_init(void) +{ + pci_init(); + return 0; +} +#endif /* CONFIG_PCI */ + static int sh_mem_env_init(void) { mem_malloc_init(); @@ -141,6 +149,9 @@ init_fnc_t *init_sequence[] = #if defined(CONFIG_CMD_NAND) sh_nand_init, /* Flash memory (NAND) init */ #endif +#if defined(CONFIG_PCI) + sh_pci_init, /* PCI Init */ +#endif devices_init, console_init_r, interrupt_init, |