Move lib_$ARCH directories to arch/$ARCH/lib

Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

6 files changed, 0 insertions, 887 deletions

diff --git a/lib_mips/Makefile b/lib_mips/Makefile
deleted file mode 100644
index 7967e5803a..0000000000
--- a/lib_mips/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(ARCH).a
-
-SOBJS-y	+=
-
-COBJS-y	+= board.o
-ifeq ($(CONFIG_QEMU_MIPS),y)
-COBJS-y	+= bootm_qemu_mips.o
-else
-COBJS-y	+= bootm.o
-endif
-COBJS-y	+= time.o
-
-SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/lib_mips/board.c b/lib_mips/board.c
deleted file mode 100644
index b2d113e870..0000000000
--- a/lib_mips/board.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#include <timestamp.h>
-#include <version.h>
-#include <net.h>
-#include <environment.h>
-#include <nand.h>
-#include <onenand_uboot.h>
-#include <spi.h>
-
-#ifdef CONFIG_BITBANGMII
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
-      (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
-    defined(CONFIG_ENV_IS_IN_NVRAM)
-#define	TOTAL_MALLOC_LEN	(CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
-#else
-#define	TOTAL_MALLOC_LEN	CONFIG_SYS_MALLOC_LEN
-#endif
-
-#undef DEBUG
-
-extern int timer_init(void);
-
-extern int incaip_set_cpuclk(void);
-
-extern ulong uboot_end_data;
-extern ulong uboot_end;
-
-ulong monitor_flash_len;
-
-const char version_string[] =
-	U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
-
-static char *failed = "*** failed ***\n";
-
-/*
- * mips_io_port_base is the begin of the address space to which x86 style
- * I/O ports are mapped.
- */
-unsigned long mips_io_port_base = -1;
-
-int __board_early_init_f(void)
-{
-	/*
-	 * Nothing to do in this dummy implementation
-	 */
-	return 0;
-}
-int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
-
-
-static int init_func_ram (void)
-{
-#ifdef	CONFIG_BOARD_TYPES
-	int board_type = gd->board_type;
-#else
-	int board_type = 0;	/* use dummy arg */
-#endif
-	puts ("DRAM:  ");
-
-	if ((gd->ram_size = initdram (board_type)) > 0) {
-		print_size (gd->ram_size, "\n");
-		return (0);
-	}
-	puts (failed);
-	return (1);
-}
-
-static int display_banner(void)
-{
-
-	printf ("\n\n%s\n\n", version_string);
-	return (0);
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-static void display_flash_config(ulong size)
-{
-	puts ("Flash: ");
-	print_size (size, "\n");
-}
-#endif
-
-static int init_baudrate (void)
-{
-	char tmp[64];	/* long enough for environment variables */
-	int i = getenv_r ("baudrate", tmp, sizeof (tmp));
-
-	gd->baudrate = (i > 0)
-			? (int) simple_strtoul (tmp, NULL, 10)
-			: CONFIG_BAUDRATE;
-
-	return (0);
-}
-
-
-/*
- * Breath some life into the board...
- *
- * The first part of initialization is running from Flash memory;
- * its main purpose is to initialize the RAM so that we
- * can relocate the monitor code to RAM.
- */
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
-	board_early_init_f,
-	timer_init,
-	env_init,		/* initialize environment */
-#ifdef CONFIG_INCA_IP
-	incaip_set_cpuclk,	/* set cpu clock according to environment variable */
-#endif
-	init_baudrate,		/* initialze baudrate settings */
-	serial_init,		/* serial communications setup */
-	console_init_f,
-	display_banner,		/* say that we are here */
-	checkboard,
-	init_func_ram,
-	NULL,
-};
-
-
-void board_init_f(ulong bootflag)
-{
-	gd_t gd_data, *id;
-	bd_t *bd;
-	init_fnc_t **init_fnc_ptr;
-	ulong addr, addr_sp, len = (ulong)&uboot_end - CONFIG_SYS_MONITOR_BASE;
-	ulong *s;
-#ifdef CONFIG_PURPLE
-	void copy_code (ulong);
-#endif
-
-	/* Pointer is writable since we allocated a register for it.
-	 */
-	gd = &gd_data;
-	/* compiler optimization barrier needed for GCC >= 3.4 */
-	__asm__ __volatile__("": : :"memory");
-
-	memset ((void *)gd, 0, sizeof (gd_t));
-
-	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-		if ((*init_fnc_ptr)() != 0) {
-			hang ();
-		}
-	}
-
-	/*
-	 * Now that we have DRAM mapped and working, we can
-	 * relocate the code and continue running from DRAM.
-	 */
-	addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size;
-
-	/* We can reserve some RAM "on top" here.
-	 */
-
-	/* round down to next 4 kB limit.
-	 */
-	addr &= ~(4096 - 1);
-	debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-
-	/* Reserve memory for U-Boot code, data & bss
-	 * round down to next 16 kB limit
-	 */
-	addr -= len;
-	addr &= ~(16 * 1024 - 1);
-
-	debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-
-	 /* Reserve memory for malloc() arena.
-	 */
-	addr_sp = addr - TOTAL_MALLOC_LEN;
-	debug ("Reserving %dk for malloc() at: %08lx\n",
-			TOTAL_MALLOC_LEN >> 10, addr_sp);
-
-	/*
-	 * (permanently) allocate a Board Info struct
-	 * and a permanent copy of the "global" data
-	 */
-	addr_sp -= sizeof(bd_t);
-	bd = (bd_t *)addr_sp;
-	gd->bd = bd;
-	debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
-			sizeof(bd_t), addr_sp);
-
-	addr_sp -= sizeof(gd_t);
-	id = (gd_t *)addr_sp;
-	debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
-			sizeof (gd_t), addr_sp);
-
-	/* Reserve memory for boot params.
-	 */
-	addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN;
-	bd->bi_boot_params = addr_sp;
-	debug ("Reserving %dk for boot params() at: %08lx\n",
-			CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp);
-
-	/*
-	 * Finally, we set up a new (bigger) stack.
-	 *
-	 * Leave some safety gap for SP, force alignment on 16 byte boundary
-	 * Clear initial stack frame
-	 */
-	addr_sp -= 16;
-	addr_sp &= ~0xF;
-	s = (ulong *)addr_sp;
-	*s-- = 0;
-	*s-- = 0;
-	addr_sp = (ulong)s;
-	debug ("Stack Pointer at: %08lx\n", addr_sp);
-
-	/*
-	 * Save local variables to board info struct
-	 */
-	bd->bi_memstart	= CONFIG_SYS_SDRAM_BASE;	/* start of  DRAM memory */
-	bd->bi_memsize	= gd->ram_size;		/* size  of  DRAM memory in bytes */
-	bd->bi_baudrate	= gd->baudrate;		/* Console Baudrate */
-
-	memcpy (id, (void *)gd, sizeof (gd_t));
-
-	/* On the purple board we copy the code in a special way
-	 * in order to solve flash problems
-	 */
-#ifdef CONFIG_PURPLE
-	copy_code(addr);
-#endif
-
-	relocate_code (addr_sp, id, addr);
-
-	/* NOTREACHED - relocate_code() does not return */
-}
-/************************************************************************
- *
- * This is the next part if the initialization sequence: we are now
- * running from RAM and have a "normal" C environment, i. e. global
- * data can be written, BSS has been cleared, the stack size in not
- * that critical any more, etc.
- *
- ************************************************************************
- */
-
-void board_init_r (gd_t *id, ulong dest_addr)
-{
-	cmd_tbl_t *cmdtp;
-#ifndef CONFIG_SYS_NO_FLASH
-	ulong size;
-#endif
-	extern void malloc_bin_reloc (void);
-#ifndef CONFIG_ENV_IS_NOWHERE
-	extern char * env_name_spec;
-#endif
-	char *s;
-	bd_t *bd;
-
-	gd = id;
-	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
-
-	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
-	gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
-
-	monitor_flash_len = (ulong)&uboot_end_data - dest_addr;
-
-	/*
-	 * We have to relocate the command table manually
-	 */
-	for (cmdtp = &__u_boot_cmd_start; cmdtp !=  &__u_boot_cmd_end; cmdtp++) {
-		ulong addr;
-
-		addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
-#if 0
-		printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
-				cmdtp->name, (ulong) (cmdtp->cmd), addr);
-#endif
-		cmdtp->cmd =
-			(int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
-
-		addr = (ulong)(cmdtp->name) + gd->reloc_off;
-		cmdtp->name = (char *)addr;
-
-		if (cmdtp->usage) {
-			addr = (ulong)(cmdtp->usage) + gd->reloc_off;
-			cmdtp->usage = (char *)addr;
-		}
-#ifdef	CONFIG_SYS_LONGHELP
-		if (cmdtp->help) {
-			addr = (ulong)(cmdtp->help) + gd->reloc_off;
-			cmdtp->help = (char *)addr;
-		}
-#endif
-	}
-	/* there are some other pointer constants we must deal with */
-#ifndef CONFIG_ENV_IS_NOWHERE
-	env_name_spec += gd->reloc_off;
-#endif
-
-	bd = gd->bd;
-
-	/* The Malloc area is immediately below the monitor copy in DRAM */
-	mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off -
-			TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN);
-	malloc_bin_reloc();
-
-#ifndef CONFIG_SYS_NO_FLASH
-	/* configure available FLASH banks */
-	size = flash_init();
-	display_flash_config (size);
-	bd->bi_flashsize = size;
-#endif
-
-	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
-	bd->bi_flashoffset = monitor_flash_len;	/* reserved area for U-Boot */
-#else
-	bd->bi_flashoffset = 0;
-#endif
-
-#ifdef CONFIG_CMD_NAND
-	puts ("NAND:  ");
-	nand_init ();		/* go init the NAND */
-#endif
-
-#if defined(CONFIG_CMD_ONENAND)
-	onenand_init();
-#endif
-
-	/* relocate environment function pointers etc. */
-	env_relocate();
-
-	/* IP Address */
-	bd->bi_ip_addr = getenv_IPaddr("ipaddr");
-
-#if defined(CONFIG_PCI)
-	/*
-	 * Do pci configuration
-	 */
-	pci_init();
-#endif
-
-/** leave this here (after malloc(), environment and PCI are working) **/
-	/* Initialize stdio devices */
-	stdio_init ();
-
-	jumptable_init ();
-
-	/* Initialize the console (after the relocation and devices init) */
-	console_init_r ();
-/** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** **/
-
-	/* Initialize from environment */
-	if ((s = getenv ("loadaddr")) != NULL) {
-		load_addr = simple_strtoul (s, NULL, 16);
-	}
-#if defined(CONFIG_CMD_NET)
-	if ((s = getenv ("bootfile")) != NULL) {
-		copy_filename (BootFile, s, sizeof (BootFile));
-	}
-#endif
-
-#ifdef CONFIG_CMD_SPI
-	puts ("SPI:   ");
-	spi_init ();		/* go init the SPI */
-	puts ("ready\n");
-#endif
-
-#if defined(CONFIG_MISC_INIT_R)
-	/* miscellaneous platform dependent initialisations */
-	misc_init_r ();
-#endif
-
-#ifdef CONFIG_BITBANGMII
-	bb_miiphy_init();
-#endif
-#if defined(CONFIG_CMD_NET)
-#if defined(CONFIG_NET_MULTI)
-	puts ("Net:   ");
-#endif
-	eth_initialize(gd->bd);
-#endif
-
-	/* main_loop() can return to retry autoboot, if so just run it again. */
-	for (;;) {
-		main_loop ();
-	}
-
-	/* NOTREACHED - no way out of command loop except booting */
-}
-
-void hang (void)
-{
-	puts ("### ERROR ### Please RESET the board ###\n");
-	for (;;);
-}
diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c
deleted file mode 100644
index 54af24cba3..0000000000
--- a/lib_mips/bootm.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <u-boot/zlib.h>
-#include <asm/byteorder.h>
-#include <asm/addrspace.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define	LINUX_MAX_ENVS		256
-#define	LINUX_MAX_ARGS		256
-
-static int	linux_argc;
-static char **	linux_argv;
-
-static char **	linux_env;
-static char *	linux_env_p;
-static int	linux_env_idx;
-
-static void linux_params_init (ulong start, char * commandline);
-static void linux_env_set (char * env_name, char * env_val);
-
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
-	void	(*theKernel) (int, char **, char **, int *);
-	char	*commandline = getenv ("bootargs");
-	char	env_buf[12];
-	char	*cp;
-
-	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
-		return 1;
-
-	/* find kernel entry point */
-	theKernel = (void (*)(int, char **, char **, int *))images->ep;
-
-	show_boot_progress (15);
-
-#ifdef DEBUG
-	printf ("## Transferring control to Linux (at address %08lx) ...\n",
-		(ulong) theKernel);
-#endif
-
-	linux_params_init (UNCACHED_SDRAM (gd->bd->bi_boot_params), commandline);
-
-#ifdef CONFIG_MEMSIZE_IN_BYTES
-	sprintf (env_buf, "%lu", (ulong)gd->ram_size);
-	debug ("## Giving linux memsize in bytes, %lu\n", (ulong)gd->ram_size);
-#else
-	sprintf (env_buf, "%lu", (ulong)(gd->ram_size >> 20));
-	debug ("## Giving linux memsize in MB, %lu\n", (ulong)(gd->ram_size >> 20));
-#endif /* CONFIG_MEMSIZE_IN_BYTES */
-
-	linux_env_set ("memsize", env_buf);
-
-	sprintf (env_buf, "0x%08X", (uint) UNCACHED_SDRAM (images->rd_start));
-	linux_env_set ("initrd_start", env_buf);
-
-	sprintf (env_buf, "0x%X", (uint) (images->rd_end - images->rd_start));
-	linux_env_set ("initrd_size", env_buf);
-
-	sprintf (env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart));
-	linux_env_set ("flash_start", env_buf);
-
-	sprintf (env_buf, "0x%X", (uint) (gd->bd->bi_flashsize));
-	linux_env_set ("flash_size", env_buf);
-
-	cp = getenv("ethaddr");
-	if (cp != NULL) {
-		linux_env_set("ethaddr", cp);
-	}
-
-	cp = getenv("eth1addr");
-	if (cp != NULL) {
-		linux_env_set("eth1addr", cp);
-	}
-
-	/* we assume that the kernel is in place */
-	printf ("\nStarting kernel ...\n\n");
-
-	theKernel (linux_argc, linux_argv, linux_env, 0);
-	/* does not return */
-	return 1;
-}
-
-static void linux_params_init (ulong start, char *line)
-{
-	char *next, *quote, *argp;
-
-	linux_argc = 1;
-	linux_argv = (char **) start;
-	linux_argv[0] = 0;
-	argp = (char *) (linux_argv + LINUX_MAX_ARGS);
-
-	next = line;
-
-	while (line && *line && linux_argc < LINUX_MAX_ARGS) {
-		quote = strchr (line, '"');
-		next = strchr (line, ' ');
-
-		while (next != NULL && quote != NULL && quote < next) {
-			/* we found a left quote before the next blank
-			 * now we have to find the matching right quote
-			 */
-			next = strchr (quote + 1, '"');
-			if (next != NULL) {
-				quote = strchr (next + 1, '"');
-				next = strchr (next + 1, ' ');
-			}
-		}
-
-		if (next == NULL) {
-			next = line + strlen (line);
-		}
-
-		linux_argv[linux_argc] = argp;
-		memcpy (argp, line, next - line);
-		argp[next - line] = 0;
-
-		argp += next - line + 1;
-		linux_argc++;
-
-		if (*next)
-			next++;
-
-		line = next;
-	}
-
-	linux_env = (char **) (((ulong) argp + 15) & ~15);
-	linux_env[0] = 0;
-	linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS);
-	linux_env_idx = 0;
-}
-
-static void linux_env_set (char *env_name, char *env_val)
-{
-	if (linux_env_idx < LINUX_MAX_ENVS - 1) {
-		linux_env[linux_env_idx] = linux_env_p;
-
-		strcpy (linux_env_p, env_name);
-		linux_env_p += strlen (env_name);
-
-		strcpy (linux_env_p, "=");
-		linux_env_p += 1;
-
-		strcpy (linux_env_p, env_val);
-		linux_env_p += strlen (env_val);
-
-		linux_env_p++;
-		linux_env[++linux_env_idx] = 0;
-	}
-}
diff --git a/lib_mips/bootm_qemu_mips.c b/lib_mips/bootm_qemu_mips.c
deleted file mode 100644
index cc70fa93f3..0000000000
--- a/lib_mips/bootm_qemu_mips.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2008
- * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <image.h>
-#include <asm/byteorder.h>
-#include <asm/addrspace.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
-	void	(*theKernel) (int, char **, char **, int *);
-	char	*bootargs = getenv ("bootargs");
-	char	*start;
-	uint	len;
-
-	/* find kernel entry point */
-	theKernel = (void (*)(int, char **, char **, int *))images->ep;
-
-	show_boot_progress (15);
-
-	debug ("## Transferring control to Linux (at address %08lx) ...\n",
-		(ulong) theKernel);
-
-	gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256;
-	debug ("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params);
-
-	/* set Magic */
-	*(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678;
-	/* set ram_size */
-	*(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size;
-
-	start = (char*)gd->bd->bi_boot_params;
-
-	len = strlen(bootargs);
-
-	strncpy(start, bootargs, len + 1);
-
-	start += len;
-
-	len = images->rd_end - images->rd_start;
-	if (len > 0) {
-		start += sprintf(start," rd_start=0x%08X rd_size=0x%0X",
-		(uint) UNCACHED_SDRAM (images->rd_start),
-		(uint) len);
-	}
-
-	/* we assume that the kernel is in place */
-	printf ("\nStarting kernel ...\n\n");
-
-	theKernel (0, NULL, NULL, 0);
-	/* does not return */
-	return 1;
-}
diff --git a/lib_mips/config.mk b/lib_mips/config.mk
deleted file mode 100644
index aa06761ae3..0000000000
--- a/lib_mips/config.mk
+++ /dev/null
@@ -1,52 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= mips_4KC-
-
-STANDALONE_LOAD_ADDR = 0x80200000 -T mips.lds
-
-PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__
-
-#
-# From Linux arch/mips/Makefile
-#
-# GCC uses -G 0 -mabicalls -fpic as default.  We don't want PIC in the kernel
-# code since it only slows down the whole thing.  At some point we might make
-# use of global pointer optimizations but their use of $28 conflicts with
-# the current pointer optimization.
-#
-# The DECStation requires an ECOFF kernel for remote booting, other MIPS
-# machines may also.  Since BFD is incredibly buggy with respect to
-# crossformat linking we rely on the elf2ecoff tool for format conversion.
-#
-# cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
-# cflags-y			+= -msoft-float
-# LDFLAGS_vmlinux		+= -G 0 -static -n -nostdlib
-# MODFLAGS			+= -mlong-calls
-#
-# On the other hand, we want PIC in the U-Boot code to relocate it from ROM
-# to RAM. $28 is always used as gp.
-#
-PLATFORM_CPPFLAGS		+= -G 0 -mabicalls -fpic
-PLATFORM_CPPFLAGS		+= -msoft-float
-PLATFORM_LDFLAGS		+= -G 0 -static -n -nostdlib
diff --git a/lib_mips/time.c b/lib_mips/time.c
deleted file mode 100644
index 0e6644149b..0000000000
--- a/lib_mips/time.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mipsregs.h>
-
-static unsigned long timestamp;
-
-/* how many counter cycles in a jiffy */
-#define CYCLES_PER_JIFFY	(CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
-
-/*
- * timer without interrupts
- */
-
-int timer_init(void)
-{
-	/* Set up the timer for the first expiration. */
-	timestamp = 0;
-	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
-
-	return 0;
-}
-
-void reset_timer(void)
-{
-	timestamp = 0;
-	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
-}
-
-ulong get_timer(ulong base)
-{
-	unsigned int count;
-	unsigned int expirelo = read_c0_compare();
-
-	/* Check to see if we have missed any timestamps. */
-	count = read_c0_count();
-	while ((count - expirelo) < 0x7fffffff) {
-		expirelo += CYCLES_PER_JIFFY;
-		timestamp++;
-	}
-	write_c0_compare(expirelo);
-
-	return (timestamp - base);
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned int tmo;
-
-	tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
-	while ((tmo - read_c0_count()) < 0x7fffffff)
-		/*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On MIPS it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On MIPS it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}